The virCommand module is specifically designed so that no caller
has to check for retval of individual virCommand*() APIs except
for virCommandRun() where the actual error is reported. Moreover,
virCommandNew*() use g_new0() to allocate memory and thus it's
not really possible for those APIs to return NULL. Which is why
they are even marked as ATTRIBUTE_NONNULL. But there are few
places where we do check the retval which is a dead code
effectively. Drop those checks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When multiple VFIO or VDPA devices are assigned to a guest, the guest
can fail to start because the guest fails to map enough memory. For
example, the case mentioned in
https://bugzilla.redhat.com/show_bug.cgi?id=2111317 results in this
failure:
2021-08-05T09:51:47.692578Z qemu-kvm: failed to write, fd=31, errno=14 (Bad address)
2021-08-05T09:51:47.692590Z qemu-kvm: vhost vdpa map fail!
2021-08-05T09:51:47.692594Z qemu-kvm: vhost-vdpa: DMA mapping failed, unable to continue
The current memlock limit calculation does not work for scenarios where
there are multiple such devices assigned to a guest. The root causes are
a little bit different between VFIO and VDPA devices.
For VFIO devices, the issue only occurs when a vIOMMU is present. In
this scenario, each vfio device is assigned a separate AddressSpace
fully mapping guest RAM. When there is no vIOMMU, the devices are all
within the same AddressSpace so no additional memory limit is needed.
For VDPA devices, each device requires the full memory to be mapped
regardless of whether there is a vIOMMU or not.
In order to enable these scenarios, we need to multiply memlock limit
by the number of VDPA devices plus the number of VFIO devices for guests
with a vIOMMU. This has the potential for pushing the memlock limit
above the host physical memory and negating any protection that these
locked memory limits are providing, but there is no other short-term
solution.
In the future, there should be have a revised userspace iommu interface
(iommufd) that the VFIO and VDPA backends can make use of. This will be
able to share locked memory limits between both vfio and vdpa use cases
and address spaces and then we can disable these short term hacks. But
this is still in development upstream.
Resolves: https://bugzilla.redhat.com/2111317
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Now that we no longer care about any of their properties, there's no need
to call `device-list-properties` on these devices.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced back in 2013 by QEMU commit:
commit 398489018183d613306ab022653552247d93919f
pc: limit 64 bit hole to 2G by default
Released in 1.6.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced back in 2012 by QEMU commit:
commit 783e9b4826b95e53e33c42db6b4bd7d89bdff147
introduce a new monitor command 'dump-guest-memory' to dump guest's memory
Released in QEMU 1.2.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Historically, the tpm->data.emulator.activePcrBanks member was an
unsigned int but since it was used as a bitmap it was converted
to virBitmap type instead. Now, the virBitmap is allocated inside
of virDomainTPMDefParseXML() but only if <activePcrBanks/> was
found with at last one child element. Otherwise it stays NULL.
Fast forward to starting a domain with TPM 2.0 and no
<activePcrBanks/> configured. Eventually,
qemuTPMEmulatorBuildCommand() is called, which subsequently calls
qemuTPMEmulatorReconfigure() and finally
qemuTPMPcrBankBitmapToStr() passing the NULL value. Before
rewrite to virBitmap this function would return NULL for empty
activePcrBanks but now, well, now it crashes.
Fixes: 52c7c31c8038aa31d502f59a40e4fb4ba9f61113
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch uses qemuMonitorQueryStats to query "halt_poll_success_ns"
and "halt_poll_fail_ns" for every vCPU. The respective values for each
vCPU are then added together.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Related: https://gitlab.com/libvirt/libvirt/-/issues/276
This patch adds an API for the "query-stats" QMP command.
The query returns a JSON containing the statistics based on the target,
which can either be vCPU or VM, and the providers. The API deserializes
the query result into an array of GHashMaps, which can later be used to
extract all the query statistics. GHashMaps are used to avoid traversing
the entire array to find the statistics you are looking for. This would
be a singleton array if the target is a VM since the returned JSON is
also a singleton array in that case.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This represents an interface connected to a VMWare Distributed Switch,
previously obscured as a dummy interface.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced back in 2010 by QEMU commit:
commit a697a334b3c4d3250e6420f5d38550ea10eb5319
virtio-net: Introduce a new bottom half packet TX
Released in QEMU 0.14.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
All callers pass 'true'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The blockdev-backup QMP command was introduced in qemu-2.3.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The event was introduced in qemu-2.3
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Set it same way we set throttling for other disks in
qemuProcessSetupDiskThrottling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While we assume that -blockdev is supported the validator had also some
corner cases for -drive. Since we use '-drive' exclusively for the
extremely rarely used SD cards it makes no sense to have the validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability is checked when we validate the source in the first
place. Also it won't make sense any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we know we have a modern qemu at hand which can interpret the
dotted syntax, we can format the -drive needed for SD cards via the
common infrastructure we have for all blockdev stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the generic frontend-less -drive code from qemuBuildDriveStr by
assuming that we support only blockdev-enabled qemus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SD card disks can't be detached, so it makes no sense to special case
them in the unplug code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All media are changed in blockdev-instantiated cdroms now, remove the
old code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The operation makes no sense regardless of the way how we specify disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With new qemu versions we setup floppies via -device.
Some legacy output tests were not modernized yet so the expected output
needs to be adjusted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
