IPv6 RA always contains an implicit default route via
the link-local address of the source of RA. This forces
the guest to install a route via isolated network, which
may disturb the guest's networking in case of multiple interfaces.
More info in 013427e6e7.
The validity of this route is controlled by "default [route] lifetime"
field of RA. If the lifetime is set to 0 seconds, then no route
is installed by receiver.
dnsmasq 2.67+ supports "ra-param=<interface>,<RA interval>,<default
lifetime>" option. We pass "ra-param=*,0,0"
(here, RA_interval=0 means default) to disable default gateway in RA
for isolated networks.
These functions all need to be called from a utility function that
must be located in the util directory, so we move them all into
util/virnetdevip.[ch] now that it exists.
Function and struct names were appropriately changed for the new
location, but all code is unchanged aside from motion and renaming.
This patch splits virnetdev.[ch] into multiple files, with the new
virnetdevip.[ch] containing all the functions related to setting and
retrieving IP-related info for a device (both addresses and routes).
I'm tired of mistyping this all the time, so let's do it the same all
the time (similar to how we changed all "Pci" to "PCI" awhile back).
(NB: I've left alone some things in the esx and vbox drivers because
I'm unable to compile them and they weren't obviously *not* a part of
some API. I also didn't change a couple of variables named,
e.g. "somethingIptables", because they were derived from the name of
the "iptables" command)
Although dns host records are stored in a separate configuration file
that is reread by dnsmasq when it receives a SIGHUP, the txt and srv
records are directly in the dnsmasq .conf file which can't be reread
after initial dnsmasq startup. This means that if an srv or txt record
is modified in a network config, libvirt needs to restart the dnsmasq
process rather than just sending a SIGHUP.
This was pointed out in a question in
https://bugzilla.redhat.com/show_bug.cgi?id=988718 , but no separate
BZ was filed.
SRIOV VFs used in macvtap passthrough mode can take advantage of the
SRIOV card's transparent vlan tagging. All the code was there to set
the vlan tag, and it has been used for SRIOV VFs used for hostdev
interfaces for several years, but for some reason, the vlan tag for
macvtap passthrough devices was stubbed out with a -1.
This patch moves a bit of common validation down to a lower level
(virNetDevReplaceNetConfig()) so it is shared by hostdev and macvtap
modes, and updates the macvtap caller to actually send the vlan config
instead of -1.
Both instances use VIR_WARN() to print the error from a failed
virDBusGetSystemBus() call. Rather than use the virGetLastError
and need to check for valid return err pointer, just use the
virGetLastErrorMessage.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We will segfault of a daemon reload picks up a new network config
that needs to be autostarted. We shouldn't be passing NULL for
network_driver here. This seems like it was missed in the larger
rework in commit 1009a61e
We had both and the only difference was that the latter also included
information about multifunction setting. The problem with that was that
we couldn't use functions made for only one of the structs (e.g.
parsing). To consolidate those two structs, use the one in virpci.h,
include that in domain_conf.h and add the multifunction member in it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
According to the dnsmasq manpage, the netmask for IPv4 address ranges
will be auto-deteremined from the interface dnsmasq is listening on,
but it can't do this for IPv6 for some reason - it instead assumes a
network prefix of 64 for all IPv6 address ranges. If this is
incorrect, dnsmasq will refuse to give out an address to clients,
instead logging this message:
dnsmasq-dhcp[2380]: no address range available for DHCPv6 request via virbr0
The solution is for libvirt to add ",$prefix" to all IPv6 dhcp-range
arguments when building the dnsmasq.conf file.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1033739
Commit id '3992ff14' added the prototype for networkGetActualType
with 1 parameter, but added 2 ATTRIBUTE_NONNULL's (assume from a
cut-n-paste), just remove (2).
There are times when it's necessary to learn the actual type of a
network connection before any resources have been allocated
(e.g. during qemuProcessPrepareDomain()), but in the past it was
necessary to call networkAllocateActualDevice() in order to have the
actual type filled in.
This new function returns the type of network that *will be* setup
once it actually happens, but without making any changes on the host.
networkStartNetwork() and networkShutdownNetwork() were calling the
wrong type-specific function in the case of networks that were
configured for macvtap ("direct") bridge mode - they were instead
calling the functions for a tap+bridge network. Currently none of
these functions does anything (they just return 0) so it hasn't
created any problems, but that could change in the future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1316465
An attempt to simplify the code for the VIR_NETWORK_FORWARD_BRIDGE
case of networkUpdateState in commit b61db335 (first in release
1.2.14) resulted in networks based on macvtap bridge mode being
erroneously marked as inactive any time libvirtd was restarted.
The problem is that the original code had differentiated between a
network using tap devices to connect to an existing host-bridge device
(forward mode of VIR_NETWORK_FORWARD_BRIDGE and a non-NULL
def->bridge), and one using macvtap bridge mode to connect to any
ethernet device (still forward mode VIR_NETWORK_FORWARD_BRIDGE, but
null def->bridge), but the changed code assumed that all networks with
VIR_NETWORK_FORWARD_BRIDGE were tap + host-bridge networks, so a null
def->bridge was interpreted as "inactive".
This patch restores the original code in networkUpdateState
These functions are going to be reused very shortly. So instead
of duplicating the code, lets move them into utils module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We include the file in plenty of places. This is mostly due to
historical reasons. The only place that needs something from the
header file is storage_backend_fs which opens _PATH_MOUNTED. But
it gets the file included indirectly via mntent.h. At no other
place in our code we need _PATH_.*. Drop the include and
configure check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are three functions that deal with allocating and freeing
devices from a networks netdev/pci device pool:
network(Allocate|Notify|Release)ActualDevice(). These functions also
maintain a counter of the number of domains currently using a network
(regardless of whether or not that network uses a device pool). Each
of these functions had multiple log messages (output using VIR_DEBUG)
that were in slightly different formats and gave varying amounts of
information.
This patch creates a single function to log the pertinent information
in a consistent manner for all three of these functions. Along with
assuring that all the functions produce a consistent form of output
(and making it simpler to change), it adds the MAC address of the
domain interface involved in the operation, making it possible to
verify which interface of which domain the operation is being done for
(assuming that all MAC addresses are unique, of course).
All of these messages are raised from DEBUG to INFO, since they don't
happen that often (once per interface per domain/libvirtd start or
domain stop), and can be very informative and helpful - eliminating
the need to log debug level messages makes it much easier to sort
these out.
networkReleaseActualDevice() and networkNotifyActualDevice() both were
updating the individual devices' connections count in two separate
places (unlike networkAllocateActualDevice() which does it in a single
unified place after success:). The code is correct, but prone to
confusion / later breakage. All of these updates are anyway located at
the end of if/else clauses that are (with the exception of a single
VIR_DEBUG() in each case) immediately followed by the success: label
anyway, so this patch replaces the duplicated ++/-- instructions with
a single ++/-- inside a qualifying "if (dev)" down below success:.
(NB: if dev != NULL, by definition we are using a device (either pci
or netdev, doesn't matter for these purposes) from the network's pool)
The VIR_DEBUG args (which will be replaced in a followup patch anyway)
were all adjusted to account for the connection count being out of
date at the time.
For the actions ADD and OLD, split out creating the new lease object,
as well as getting the environment variables that do not affect
the parsing of command line arguments.
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce virLeaseReadCustomLeaseFile which will populate
the new leases array with all the leases, except for expired
ones and the ones matching 'ip_to_delete'.
This removes five variables from main().
We either use the value from the environment variable, or learn it from
the existing lease file.
In the second case, the pointer would be pointing into the JSON object
of the first lease with a DUID, owned by leases_array, then
leases_array_new.
Always allocate the string instead, making obvious who should free the
string.
If dnsmasq specified DNSMASQ_IAID (so we're dealing with an IPv6
lease) but no DNSMASQ_MAC, we skip creation of the new lease object.
Also skip adding it to the leases array.
https://bugzilla.redhat.com/show_bug.cgi?id=1202350
Instead of comparing garbage strings against real MAC addresses,
introduce an error mesage for unparsable ones:
$ virsh net-dhcp-leases default --mac t12
error: Failed to get leases info for default
error: invalid MAC address: t12
https://bugzilla.redhat.com/show_bug.cgi?id=1261432
A PCI device may have the capability to setup virtual functions (VFs)
but have them currently all disabled. Prior to this patch, if that was
the case the the node device XML for the device wouldn't report any
virtual_functions capability.
With this patch, if a file called "sriov_totalvfs" is found in the
device's sysfs directory, its contents will be interpreted as a
decimal number, and that value will be reported as "maxCount" in a
capability element of the device's XML, e.g.:
<capability type='virtual_functions' maxCount='7'/>
This will be reported regardless of whether or not any VFs are
currently enabled for the device.
NB: sriov_numvfs (the number of VFs currently active) is also
available in sysfs, but that value is implied by the number of items
in the list that is inside the capability element, so there is no
reason to explicitly provide it as an attribute.
sriov_totalvfs and sriov_numvfs are available in kernels at least as far
back as the 2.6.32 that is in RHEL6.7, but in the case that they
simply aren't there, libvirt will behave as it did prior to this patch
- no maxCount will be displayed, and the virtual_functions capability
will be absent from the device's XML when 0 VFs are enabled.
commit db488c79 assumed that dnsmasq would complete IPv6 DAD before
daemonizing, but in reality it doesn't wait, which creates problems
when libvirt's bridge driver sets the matching "dummy tap device" to
IFF_DOWN prior to DAD completing.
This patch waits for DAD completion by periodically polling the kernel
using netlink to check whether there are any IPv6 addresses assigned
to bridge which have a 'tentative' state (if there are any in this
state, then DAD hasn't yet finished). After DAD is finished, execution
continues. To avoid an endless hang in case something was wrong with
the kernel's DAD, we wait a maximum of 5 seconds.
The internal representation of a JSON array counts the items in
size_t. However, for some reason, when asking for the count it's
reported as int. Firstly, we need the function to return a signed
type as it's returning -1 on an error. But, not every system has
integer the same size as size_t. Therefore, lets return ssize_t.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's a check right at the beginning of the function that
shortcuts if the function was called over all NULL arguments.
However, this was meant just as a fool-proof check so that we
don't crash if function is used in a bad manner. Anyway, it makes
Coverity unhappy as it then thinks any of the arguments could be
NULL. Well, with the current state of the code it can't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It may happen that an interface don't have any bandwidth set and
a new one is to be set. In that case, @ifaceBand will be NULL.
This will cause troubles later in the code when deciding what to
do.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, if a domain vNIC's bandwidth has been successfully set, it's
possible that because @floor is set on network's bridge, this
part may need updating too. And that's exactly what this function
does. While the previous commit introduced a function to check if
@floor can be satisfied, this does all the hard work. In general,
there may be three, well four possibilities:
1) No change in @floor value (either it remain unset, or its
value hasn't changed)
2) The @floor value has changed from a non-zero to a non-zero
value
3) New @floor is to be set
4) Old @floor must be cleared out
The difference between 2), 3) and 4) is, that while in 2) the QoS
tree on the network's bridge already has a special class for the
vNIC, in 3) the class must be created from scratch. In 4) it must
be removed. Fortunately, we have helpers for all three
interesting cases.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When a domain vNIC's bandwidth is to be changed (at runtime) it is
possible that guaranteed minimal bandwidth (@floor) will change too.
Well, so far it is, because we still don't have an implementation that
allows setting it dynamically, so it's effectively erased on:
#virsh domiftune $dom vnet0 --inbound 0
However, that's slightly unfortunate. We do some checks on domain
startup to see if @floor can be guaranteed. We ought do the same if
QoS is changed at runtime.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is no functional change. It's just that later in the series we
will need to pass class_id as an integer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The comment above that function says: "This function can be a lot more
exhaustive, ...", so let's be.
Check for collisions between routes in the system and static routes
being added explicitly from the <route/> element of the network XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1094205
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are now many more reasons that virSocketAddrGetRange() could
fail, so it is much more informative to report the error there instead
of in the caller. (one of the two callers was previously assuming
success, which is almost surely safe based on the parsing that has
already happened to the config by that time, but it still is nicer to
account for an error "just in case")
Part of fix for: https://bugzilla.redhat.com/show_bug.cgi?id=985653
This loop had automatic variable definitions mixed with code. This
patch moves the definitions to the top of the function and puts
cleanup for them at the bottom. No functional change.
Part of fix for: https://bugzilla.redhat.com/show_bug.cgi?id=985653
virSocketAddrGetRange() has been updated to take the network address
and prefix, and now checks that both the start and end of the range
are within that network, thus validating that the entire range of
addresses is in the network. For IPv4, it also checks that ranges to
not start with the "network address" of the subnet, nor end with the
broadcast address of the subnet (this check doesn't apply to IPv6,
since IPv6 doesn't have a broadcast or network address)
Negative tests have been added to the network update and socket tests
to verify that bad ranges properly generate an error.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=985653
