Commit Graph

508 Commits

Author SHA1 Message Date
Eric Blake
c308a9ae15 build: work around broken kernel header
I got this scary warning during ./configure on rawhide:

checking linux/if_bridge.h usability... no
checking linux/if_bridge.h presence... yes
configure: WARNING: linux/if_bridge.h: present but cannot be compiled
configure: WARNING: linux/if_bridge.h:     check for missing prerequisite headers?
configure: WARNING: linux/if_bridge.h: see the Autoconf documentation
configure: WARNING: linux/if_bridge.h:     section "Present But Cannot Be Compiled"
configure: WARNING: linux/if_bridge.h: proceeding with the compiler's result
configure: WARNING:     ## ------------------------------------- ##
configure: WARNING:     ## Report this to libvir-list@redhat.com ##
configure: WARNING:     ## ------------------------------------- ##
checking for linux/if_bridge.h... no

* configure.ac (AC_CHECK_HEADERS): Provide struct in6_addr, since
linux/if_bridge.h uses it without declaring it.
2013-01-14 10:04:09 -07:00
Daniel P. Berrange
3d1596b048 Introduce an LXC specific public API & library
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.

The actual APIs are

  int virDomainLxcOpenNamespace(virDomainPtr domain,
                                int **fdlist,
                                unsigned int flags);

  int virDomainLxcEnterNamespace(virDomainPtr domain,
                                 unsigned int nfdlist,
                                 int *fdlist,
                                 unsigned int *noldfdlist,
                                 int **oldfdlist,
                                 unsigned int flags);

which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.

NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:58:34 +00:00
Daniel P. Berrange
907a39e735 Add a test suite for validating SELinux labelling
There are many aspects of the guest XML which result in the
SELinux driver applying file labelling. With the increasing
configuration options it is desirable to test this behaviour.
It is not possible to assume that the test suite has the
ability to set SELinux labels. Most filesystems though will
support extended attributes. Thus for the purpose of testing,
it is possible to extend the existing LD_PRELOAD hack to
override setfilecon() and getfilecon() to simply use the
'user.libvirt.selinux' attribute for the sake of testing.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:40:04 +00:00
Daniel P. Berrange
cf7ac00ebd Rename HAVE_POLKIT to WITH_POLKIT 2013-01-14 13:29:55 +00:00
Daniel P. Berrange
14e3d7d2a4 Remove unused XMLRPC_REQUIRED var 2013-01-14 13:29:55 +00:00
Daniel P. Berrange
a99bfb4b5e Convert openwsman check to use LIBVIRT_CHECK_PKG 2013-01-14 13:29:54 +00:00
Daniel P. Berrange
0eec69729d Convert ssh2 check to use LIBVIRT_CHECK_PKG
This converts the libssh2 configure check to use LIBVIRT_CHECK_PKG.
Previously it would check version 1.0 and 1.3, but this simplifies
things to just require version 1.3
2013-01-14 13:29:44 +00:00
Daniel P. Berrange
e1e94f2ed9 Rename HAVE_LIBSSH2 to WITH_SSH2 2013-01-14 13:29:35 +00:00
Daniel P. Berrange
40541c2a6b Convert curl check over to use LIBVIRT_CHECK_PKG 2013-01-14 13:29:34 +00:00
Daniel P. Berrange
d9a2a993dd Rename HAVE_LIBCURL to WITH_CURL 2013-01-14 13:29:19 +00:00
Daniel P. Berrange
e9f4c675e2 Convert fuse check over to use LIBVIRT_CHECK_PKG 2013-01-14 13:29:17 +00:00
Daniel P. Berrange
8c1e9be48f Rename HAVE_FUSE to WITH_FUSE 2013-01-14 13:26:47 +00:00
Daniel P. Berrange
bccd4a8cbc Rename HAVE_GNUTLS to WITH_GNUTLS 2013-01-14 13:26:47 +00:00
Daniel P. Berrange
19e285f1ae Convert blkid check over to use LIBVIRT_CHECK_PKG
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:26:47 +00:00
Daniel P. Berrange
7db9ac8260 Convert HAVE_LIBBLKID to WITH_BLKID
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:26:47 +00:00
Daniel P. Berrange
f488ddf4d8 Convert HAL check to use LIBVIRT_CHECK_PKG
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:26:47 +00:00
Daniel P. Berrange
24120066a4 Convert HAVE_HAL to WITH_HAL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:26:47 +00:00
Daniel P. Berrange
04ac20df3f Convert udev/pciaccess checks to use LIBVIRT_CHECK_PKG
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:26:47 +00:00
Daniel P. Berrange
d3b05abfa9 Convert HAVE_UDEV to WITH_UDEV
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:26:47 +00:00
Daniel P. Berrange
bae47e4e30 Convert avahi check to use LIBVIRT_CHECK_PKG
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:26:46 +00:00
Daniel P. Berrange
2de152d20d Convert HAVE_AVAHI to WITH_AVAHI
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:26:34 +00:00
Daniel P. Berrange
832d140930 Convert DBus check to use LIBVIRT_CHECK_PKG
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:25:47 +00:00
Daniel P. Berrange
da77f04ed5 Convert HAVE_DBUS to WITH_DBUS
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:25:47 +00:00
Daniel P. Berrange
e763ad256d Convert netcf check to use LIBVIRT_CHECK_PKG
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:25:40 +00:00
Daniel P. Berrange
cf6f8811fb Convert cap-ng check to use LIBVIRT_CHECK_LIB
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:25:06 +00:00
Daniel P. Berrange
ef38965c30 Convert HAVE_CAPNG to WITH_CAPNG
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:25:06 +00:00
Daniel P. Berrange
c85e1dd71b Convert numactl checks to use LIBVIRT_CHECK_LIB
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:25:06 +00:00
Daniel P. Berrange
6f736c83e5 Convert HAVE_NUMACTL to WITH_NUMACTL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:25:06 +00:00
Daniel P. Berrange
766ace80d6 Convert apparmor check to use LIBVIRT_CHECK_LIB
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:25:05 +00:00
Daniel P. Berrange
98de5f3e5d Convert selinux check to use LIBVIRT_CHECK_LIB
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:24:49 +00:00
Daniel P. Berrange
63f18f3786 Convert HAVE_SELINUX to WITH_SELINUX
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:24:49 +00:00
Daniel P. Berrange
054bbfcbaa Convert audit check to use LIBVIRT_CHECK_LIB
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Daniel P. Berrange
e424220a0e Convert HAVE_AUDIT to WITH_AUDIT
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Daniel P. Berrange
c45fed8a63 Convert sasl check to use LIBVIRT_CHECK_LIB_ALT
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Daniel P. Berrange
321a7d53f3 Convert HAVE_SASL to WITH_SASL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Daniel P. Berrange
a38dbf6673 Convert sanlock check to use LIBVIRT_CHECK_LIB
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Daniel P. Berrange
4da3000c66 Convert HAVE_SANLOCK to WITH_SANLOCK
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Daniel P. Berrange
654c709baa Convert yajl check to use LIBVIRT_CHECK_LIB_ALT
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Daniel P. Berrange
49a1c16027 Convert HAVE_YAJL into WITH_YAJL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:22 +00:00
Eric Blake
daa886b635 maint: don't distribute generated .def files
I ran 'make dist' in the directory left over from ./autobuild.sh
(which was configured for a mingw cross build); the resulting
tarball had more files than 'make dist' on a normal Linux build.
I traced it to the fact that we were distributing a generated
file, but only when configure said the end user had to generate
the file in the first place.  In the process, I noticed that
we had some difference in symbol file names; I added a comment
explaining why the difference exists (after first trying to
normalize the names and hitting VPATH build failures).

* configure.ac (LIBVIRT_QEMU_SYMBOL_FILE): Add some comments.
* src/Makefile.am (EXTRA_DIST): No need to ship a generated file;
particularly since which file is built depends on configure results.
2013-01-10 15:29:27 -07:00
Daniel P. Berrange
f587c27768 Make TLS support conditional
Add checks for existence of GNUTLS and automatically disable
it if not found.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-08 20:57:31 +00:00
Daniel P. Berrange
5f669ea976 Add internal APIs for dealing with namespaces
Add some APIs for acquiring namespace file descriptors and
switching namespaces

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-08 09:21:08 +00:00
Jim Fehlig
68e7bc4561 build: Add libxenctrl to LIBXL_LIBS
Commit dfa1e1dd removed libxenctrl from LIBXL_LIBS, but the libxl
driver uses a symbol from this library.  Explicitly link with
libxenctrl instead of relying on the build system to support
implicit DSO linking.
2013-01-07 10:15:56 -07:00
John Eckersberg
3c971c675a conf: Rename console-specific identifiers to be more generic
The functionality provided in virchrdev.c (previously virconsole.c) is
applicable to other types of character devices besides consoles, such
as channels.  This patch is just code motion, renaming things such as
"console" or "pty", instead using more general terms such as
"character device" or "device path".
2013-01-04 17:43:21 -07:00
Eric Blake
83aca30f1e build: use autobuild module to make build logs nicer
A recent build failure made me realize that we could usefully add
a bit more information to configure output, for aid in analysis of
failed builds.  Pulling in the autobuild module merely adds these
four lines to configure output:

configure: autobuild project... libvirt
configure: autobuild revision... v1.0.1-113-g7a74eea
configure: autobuild hostname... myhost
configure: autobuild timestamp... 20130102T233543Z

which can be useful even if not using the Autobuild project to parse
build logs.

* bootstrap.conf (gnulib_modules): Add autobuild.
* configure.ac: Favor git version over release version, when available.
2013-01-02 16:43:58 -07:00
Eric Blake
6e148567fd build: make broken -Wlogical-op test be gcc-only
Commit 8b8fcdea introduced a check for broken gcc -Wlogical-op,
but did not guard the check against non-gcc compilers, which might
lead to spurious failures when another compiler encounters an
unknown pragma.  Additionally, all of our compiler warning logic
should belong in a single file, and use cache variables to allow
overriding the decision at configure time if necessary.

* configure.ac (BROKEN_GCC_WLOGICALOP): Move...
* m4/virt-compile-warnings.m4 (LIBVIRT_COMPILE_WARNINGS): ...here,
and update to modern autoconf idioms.
2012-12-19 12:21:09 -07:00
Viktor Mihajlovski
8b8fcdea6e build: Check for broken GCC -Wlogical-op in configure
Some older versions of GCC report a false positive on code like
  char * haystack, needle;
  strchr(haystack, needle);

Added an extra check in configure.ac which will
  #define BROKEN_GCC_WLOGICALOP 1
in this case, allowing to special handle "offending" code.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2012-12-17 17:36:56 +00:00
Daniel Veillard
34ca568497 Release of libvirt-1.0.1
- configure.ac docs/news.html.in: update for the release
- po/*.po: updated from transifex
2012-12-17 11:36:37 +08:00
Roman Bogorodskiy
0c94357f9d Socket identity support for FreeBSD.
This adds an implementation of virNetSocketGetUNIXIdentity()
using LOCAL_PEERCRED socket option and xucred struct, defined
in <sys/ucred.h> on systems that have it.
2012-12-14 11:49:31 -07:00
Guido Günther
238dba0f9c Require SANLK_INQ_WAIT for inq_lockspace support
since compilation breaks otherwise with older libsanlock.
2012-12-14 18:03:49 +01:00
Roman Bogorodskiy
9a2f36ec04 Qemu FreeBSD: fix compilation
* Autotools changes:
  - Don't assume Qemu is Linux-only
  - Check Linux headers only on Linux
  - Disable firewalld on FreeBSD
* Initctl:
  Initctl seem to present only on Linux, so stub it on other platforms
* Raw I/O: Linux-only as well
* Headers cleanup
2012-12-12 11:59:53 -07:00
Jim Fehlig
dfa1e1dd53 Convert libxl driver to Xen 4.2
Based on a patch originally authored by Daniel De Graaf

  http://lists.xen.org/archives/html/xen-devel/2012-05/msg00565.html

This patch converts the Xen libxl driver to support only Xen >= 4.2.
Support for Xen 4.1 libxl is dropped since that version of libxl is
designated 'technology preview' only and is incompatible with Xen 4.2
libxl.  Additionally, the default toolstack in Xen 4.1 is still xend,
for which libvirt has a stable, functional driver.
2012-12-06 16:15:54 -07:00
Gao feng
b6c37e5fb5 Add a configure option for fuse support in LXC driver
Add a configure option --with-fuse to prepare introduction
of fuse support for libvirt lxc.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
2012-11-28 10:28:49 +00:00
Michal Privoznik
96a02703da sanlock: Retry after EINPROGRESS
It may take some time for sanlock to add a lockspace. And if user
restart libvirtd service meanwhile, the fresh daemon can fail adding
the same lockspace with EINPROGRESS. Recent sanlock has
sanlock_inq_lockspace() function which should block until lockspace
changes state. If we are building against older sanlock we should
retry a few times before claiming an error. This issue can be easily
reproduced:

for i in {1..1000} ; do echo $i; service libvirtd restart; sleep 2; done
20
Stopping libvirtd daemon:                                  [FAILED]
Starting libvirtd daemon:                                  [  OK  ]
21
Stopping libvirtd daemon:                                  [  OK  ]
Starting libvirtd daemon:                                  [  OK  ]
22
Stopping libvirtd daemon:                                  [  OK  ]
Starting libvirtd daemon:                                  [  OK  ]

 error : virLockManagerSanlockSetupLockspace:334 : Unable to add
 lockspace /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__: Operation now in
 progress
2012-11-16 08:00:11 +01:00
Daniel Veillard
2b435c153e Release of libvirt-1.0.0
* configure.ac docs/news.html.in libvirt.spec.in: update for the new release
* po/*.po*: update from transifex, a lot of added support e.g. Indian
  languages, and regenerate
2012-11-02 12:08:11 +08:00
Christophe Fergeau
662f8a2ab3 Fix disabling of apparmor/selinux security drivers
When using --without-$name --without-secdriver-$name with $name being
selinux or apparmor, configure will fail saying that AppArmor/SELinux
development package must be installed.
This is caused by a small bug in --with-secdriver-$name handling in
configure.ac which treats --without-secdriver-$name when $name as if the
user had requested to enable $name when $name couldn't be detected on
the system.

This commit also makes sure the detection checks for disabled
secdrivers do not needlessly get run, especially as this could
cause an error as well in --with-$name --without-secdriver-$name
situations.
2012-10-23 08:56:03 +02:00
Jiri Denemark
5ce6d95eed locking: Fix build with sanlock < 2.4
libvirt started using sanlock_killpath to implement on_lockfailure
action. Since sanlock_killpath was introduced in sanlock 2.4, libvirt
fails to build with older sanlock.
2012-10-16 21:32:05 +02:00
Martin Kletzander
9674f2c637 selinux: Use raw contexts
We are currently able to work only with non-translated SELinux
contexts, but we are using functions that work with translated
contexts throughout the code.  This patch swaps all SELinux context
translation relative calls with their raw sisters to avoid parsing
problems.

The problems can be experienced with mcstrans for example.  The
difference is that if you have translations enabled (yum install
mcstrans; service mcstrans start), fgetfilecon_raw() will get you
something like 'system_u:object_r:virt_image_t:s0', whereas
fgetfilecon() will return 'system_u:object_r:virt_image_t:SystemLow'
that we cannot parse.

I was trying to confirm that the _raw variants were here since the dawn of
time, but the only thing I see now is that it was imported together in
the upstream repo [1] from svn, so before 2008.

Thanks Laurent Bigonville for finding this out.

[1] http://oss.tresys.com/git/selinux.git
2012-10-12 17:54:09 +02:00
Ján Tomko
149c87b49d Various typos and misspellings 2012-10-12 00:03:43 +02:00
Doug Goldstein
5a33366f5c interface: add udev based backend for virInterface
Add a read-only udev based backend for virInterface. Useful for distros
that do not have netcf support yet. Multiple libvirt based utilities use
a HAL based fallback when virInterface is not available which is less
than ideal. This implements:
* virConnectNumOfInterfaces()
* virConnectListInterfaces()
* virConnectNumOfDefinedInterfaces()
* virConnectListDefinedInterfaces()
* virConnectListAllInterfaces()
* virConnectInterfaceLookupByName()
* virConnectInterfaceLookupByMACString()
2012-10-09 09:39:43 -06:00
Matthias Bolte
458c499841 Call curl_global_init from virInitialize to avoid thread-safety issues
curl_global_init is not thread-safe. curl_easy_init might call
curl_global_init when it was no called before. But curl_easy_init
can be called from different threads by the ESX driver. Therefore,
call curl_global_init from virInitialize to stop curl_easy_init from
calling it.

Reported by Benjamin Wang.
2012-10-08 21:27:58 +02:00
Alexander Larsson
53d5ad94c0 Fix typo in HAVE_DBUS automake conditional
The variable that is set in the script is with_dbus, not have_dbus.
2012-10-08 10:33:48 -06:00
Eric Blake
cd1e8d1c47 build: avoid journald on rhel 5
Commit f6430390 broke builds on RHEL 5, where glibc (2.5) is too
old to support mkostemp (2.7) or htole64 (2.9).  While gnulib
has mkostemp, it still lacks htole64; and it's not worth dragging
in replacements on systems where journald is unlikely to exist
in the first place, so we just use an extra configure-time check
as our witness of whether to attempt compiling the code.

* src/util/logging.c (virLogParseOutputs): Don't attempt to
compile journald on older glibc.
* configure.ac (AC_CHECK_DECLS): Check for htole64.
2012-10-01 17:33:25 -06:00
Daniel J Walsh
aa696e1846 build: default selinuxfs mount point to /sys/fs/selinux
Currently if you build on a machine that does not support SELinux we end up
with the default mount point being /selinux, since this is moved to
/sys/fs/selinux, we should start defaulting there.

I believe this is causing a bug in libvirt-lxc when /selinux does not exists,
even though /sys/fs/selinux exists.
2012-09-28 13:50:06 -06:00
Jim Fehlig
416eca189b Fix compilation of legacy xen driver with Xen 4.2
In Xen 4.2, xs.h is deprecated in favor of xenstore.h.  xs.h now
contains

#warning xs.h is deprecated use xenstore.h instead
#include <xenstore.h>

which fails compilation when warnings are treated as errors.

Introduce a configure-time check for xenstore.h and if found,
use it instead of xs.h.
2012-09-27 10:27:33 -06:00
Christophe Fergeau
f6c2951566 build: fix detection of netcf linked with libnl1
Commit 9298bfbcb introduced code to detect if netcf is linked with
libnl1, and to prefer libnl1 over libnl3 when this is the case.
This behaviour can be disabled by setting LIBNL_CFLAGS to any value,
including the empty string.
However, configure.ac sets LIBNL_CFLAGS to "" before attempting
libnl detection, so the libnl1 detection code is always disabled.
This caused issues on my f17 system where netcf is linked with libnl1
but libvirt got built with libnl3.

This commit removes the setting of the LIBNL_* variables to "" as
this does not appear to be needed. After this change, libnl1 is
used when building libvirt on my f17 system.
2012-09-25 11:07:43 +02:00
Daniel Veillard
f8fbeb50d5 Release of libvirt-0.10.2
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update from transifex and regenerate
2012-09-24 12:46:37 +08:00
Doug Goldstein
b95ad92e05 build: define WITH_INTERFACE for the driver
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.

Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.

* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
2012-09-19 08:27:01 -06:00
Richard W.M. Jones
5090c576e3 Add a ./run script for running programs from the local directory.
With this script you can run libvirt programs without needing to
install them first.  You just have to do for example:

  ./run ./tools/virsh [args ...]

If you are already in the tools/ subdirectory, then the following
command will also work:

  ../run ./virsh [...]

You can also run the C programs under valgrind like this:

  ./run valgrind [valgrind opts...] ./program

or under gdb:

  ./run gdb --args ./program

This also works with sudo (eg. if you need root access for libvirt):

  sudo ./run ./tools/virsh list --all

Derived from libguestfs and simplified.  The ./run script in
libguestfs is much more sophisticated:

https://github.com/libguestfs/libguestfs/blob/master/run.in
2012-09-18 10:59:16 +01:00
Guido Günther
615851dd19 Look in Debian's multiarch libs too
so we don't fail when libnetcf is built as multiarch lib.
2012-09-13 22:42:35 +02:00
Eric Blake
67936d1301 build: don't fail if libnl-3 is not found
Commit 9298bfb changed configure to split the libnl into two
separate pkg config checks instead of nesting the second check
on the failure path of the first.  But the default pkg config
behavior is to abort configure if a check fails.  Since we have
a second check lined up, we need an explicit failure case that
does not abort if the first check fails.

Meanwhile, commit 51b708c is reverted.  It did not fix any
behavior, and in fact, introduced a regression to the fallback
case when the user explicitly sets $LIBNL_CFLAGS.

* configure.ac: Don't abort if libnl-3 is not found.
2012-09-13 10:53:57 -06:00
Osier Yang
51b708c63e build: Fix typo which causes build failure
Pushed under build-breaker rule.
2012-09-13 12:44:19 +08:00
Eric Blake
9298bfbcb4 build: force libnl1 if netcf also used libnl1
Recent spec file changes ensure that in distro situations, netcf
and libvirt will link against the same libnl in order to avoid
dumping core.  But for every-day development, if you use F17 and
have the libnl3-devel headers available, libvirt was blindly
linking against libnl3 even though F17 netcf still links against
libnl1, making testing a self-built binary on F17 impossible.

By making configure a little bit smarter, we can avoid this
situation - we merely skip the probe of libnl-3 if we can prove
that netcf is still using libnl-1.  I intentionally wrote the
test so that we still favor libnl-3 if netcf is not installed or
if we couldn't use ldd to determine things.

Defaults being what they are, someone will invariably complain
that our smarts were wrong.  Never fear - in that case, just run
./configure LIBNL_CFLAGS=..., where the fact that you set
LIBNL_CFLAGS (even to the empty string) will go back to probing
for libnl-3, regardless of netcf's choice.

* configure.ac (LIBNL): Don't probe libnl3 if netcf doesn't use it.
2012-09-12 15:32:28 -06:00
Eric Blake
ccaf0beec8 build: improved handling of <execinfo.h>, BSD <net/if.h>
FreeBSD and OpenBSD have a <net/if.h> that is not self-contained;
and mingw lacks the header altogether.  But gnulib has just taken
care of that for us, so we might as well simplify our code.  In
the process, I got a syntax-check failure if we don't also take
the gnulib execinfo module.

* .gnulib: Update to latest, for execinfo and net_if.
* bootstrap.conf (gnulib_modules): Add execinfo and net_if modules.
* configure.ac: Let gnulib check for headers.  Simplify check for
'struct ifreq', while also including enough prereq headers.
* src/internal.h (IF_NAMESIZE): Drop, now that gnulib guarantees it.
* src/nwfilter/nwfilter_learnipaddr.h: Use correct header for
IF_NAMESIZE.
* src/util/virnetdev.c (includes): Assume <net/if.h> exists.
* src/util/virnetdevbridge.c (includes): Likewise.
* src/util/virnetdevtap.c (includes): Likewise.
* src/util/logging.c (includes): Assume <execinfo.h> exists.
(virLogStackTraceToFd): Handle gnulib's fallback implementation.
2012-09-06 10:08:47 -06:00
Eric Blake
d74e5a4dfc build: use correct libraries for clock_gettime
On OpenBSD, clock_gettime() exists in libc rather than librt, and
blindly linking with -lrt made the build fail.  Gnulib already
did the work for determining which libraries to use, so we should
reuse that work rather than doing it ourselves.

* bootstrap.conf (gnulib_modules): Pull in clock-time.
* configure.ac (RT_LIBS): Drop.
* src/Makefile.am (libvirt_util_la_LIBADD): Use gnulib variable
instead.
* src/util/virtime.c (includes): Simplify.
2012-09-04 10:57:25 -06:00
Daniel Veillard
383a41657f Release of libvirt-0.10.1
* configure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: pulled localization updates for sp,ja,mr,pa,uk,zh_CN,zh_TW
  and regenerated
2012-08-31 20:41:06 +08:00
Daniel Veillard
6540efa40d Release of libvirt-0.10.0
* configure.ac docs/news.html.in libvirt.spec.in: updates for the release
* po/*.po*: update localizations for zh_CN, uk, ja, pt_BR, as, sp, mr, zh_TW
2012-08-29 12:00:36 +08:00
Eric Blake
77de1f3573 build: work with older RHEL 5 kernel
We already skip out on building the LXC under RHEL 5, because the
kernel is too old (commits 4c18acf, 2dee896); but commit 9612e4b
moved some LXC-only code into common files, resulting in this
build failure:

util/virfile.c: In function 'virFileLoopDeviceAssociate':
util/virfile.c:580: error: 'LO_FLAGS_AUTOCLEAR' undeclared (first use in this function)

Unfortunately, the kernel folks only made it an enum, rather than
also a #define, so we have to modify configure.ac to record when
it is usable.

* configure.ac (with_lxc): Mark when LO_FLAGS_AUTOCLEAR was found.
* src/util/virfile.c (virFileLoopDeviceAssociate): Avoid
compilation when kernel is too old.
2012-08-21 12:07:00 -06:00
Thomas Woerner
bf156385a0 network: use firewalld instead of iptables, when available
* configure.ac, spec file: firewalld defaults to enabled if dbus is
  available, otherwise is disabled. If --with_firewalld is explicitly
  requested and dbus is not available, configure will fail.

* bridge_driver: add dbus filters to get the FirewallD1.Reloaded
  signal and DBus.NameOwnerChanged on org.fedoraproject.FirewallD1.
  When these are encountered, reload all the iptables reuls of all
  libvirt's virtual networks (similar to what happens when libvirtd is
  restarted).

* iptables, ebtables: use firewall-cmd's direct passthrough interface
  when available, otherwise use iptables and ebtables commands. This
  decision is made once the first time libvirt calls
  iptables/ebtables, and that decision is maintained for the life of
  libvirtd.

* Note that the nwfilter part of this patch was separated out into
  another patch by Stefan in V2, so that needs to be revised and
  re-reviewed as well.

================

All the configure.ac and specfile changes are unchanged from Thomas'
V3.

V3 re-ran "firewall-cmd --state" every time a new rule was added,
which was extremely inefficient.  V4 uses VIR_ONCE_GLOBAL_INIT to set
up a one-time initialization function.

The VIR_ONCE_GLOBAL_INIT(x) macro references a static function called
vir(Ip|Eb)OnceInit(), which will then be called the first time that
the static function vir(Ip|Eb)TablesInitialize() is called (that
function is defined for you by the macro). This is
thread-safe, so there is no chance of any race.

IMPORTANT NOTE: I've left the VIR_DEBUG messages in these two init
functions (one for iptables, on for ebtables) as VIR_WARN so that I
don't have to turn on all the other debug message just to see
these. Even if this patch doesn't need any other modification, those
messages need to be changed to VIR_DEBUG before pushing.

This one-time initialization works well. However, I've encountered
problems with testing:

1) Whenever I have enabled the firewalld service, *all* attempts to
call firewall-cmd from within libvirtd end with firewall-cmd hanging
internally somewhere. This is *not* the case if firewall-cmd returns
non-0 in response to "firewall-cmd --state" (i.e. *that* command runs
and returns to libvirt successfully.)

2) If I start libvirtd while firewalld is stopped, then start
firewalld later, this triggers libvirtd to reload its iptables rules,
however it also spits out a *ton* of complaints about deletion failing
(I suppose because firewalld has nuked all of libvirt's rules). I
guess we need to suppress those messages (which is a more annoying
problem to fix than you might think, but that's another story).

3) I noticed a few times during this long line of errors that
firewalld made a complaint about "Resource Temporarily
unavailable. Having libvirtd access iptables commands directly at the
same time as firewalld is doing so is apparently problematic.

4) In general, I'm concerned about the "set it once and never change
it" method - if firewalld is disabled at libvirtd startup, causing
libvirtd to always use iptables/ebtables directly, this won't cause
*terrible* problems, but if libvirtd decides to use firewall-cmd and
firewalld is later disabled, libvirtd will not be able to recover.
2012-08-21 13:40:58 -04:00
Peter Krempa
1193fc5f44 libssh2_transport: add main libssh2 transport implementation
This patch adds helper functions that enable us to use libssh2 in
conjunction with libvirt's virNetSockets for ssh transport instead of
spawning "ssh" client process.

This implemetation supports tunneled plaintext, keyboard-interactive,
private key, ssh agent based and null authentication. Libvirt's Auth
callback is used for interaction with the user. (Keyboard interactive
authentication, adding of host keys, private key passphrases). This
enables seamless integration into the application using libvirt. No
helpers as "ssh-askpass" are needed.

Reading and writing of OpenSSH style "known_hosts" files is supported.

Communication is done using SSH exec channel, where the user may specify
arbitrary command to be executed on the remote side and reads and writes
to/from stdin/out are sent through the ssh channel. Usage of stderr is
not (yet) supported.
2012-08-21 14:47:09 +02:00
Eric Blake
ba9c38b430 build: fix build with autoconf 2.59
Commit 350583c8 broke development on a RHEL 5 box, where the
ancient Autoconf 2.59 lacks AS_VERSION_STRING.  Rather than
backport the complex awk script that newer autoconf uses for
true strverscmp comparisons from the shell, it was easier to
just open-code a shell case statement.

* configure.ac (qemu_version): Open-code a replacement for
AS_VERSION_CHECK.
2012-08-21 00:29:49 -06:00
Daniel P. Berrange
3b0cd660ef Fix timebomb in LIBVIRT_VERSION_INFO calculation
The way LIBVIRT_VERSION_INFO is calculated has a timebomb that
will cause us to accidentally break soname when we change the
major version number to a non-zero value !

Given CURRENT:REVISION:AGE, libtool will generate

   libvirt.so.($CURRENT-$AGE).$AGE.$REVISION

We set CURRENT to be MAJOR+MINOR and AGE to $MINOR, so as
soon as MAJOR changes to non-zero, we get libvirt.so.1
as the soname, eg  1.3.9 would create libvirt.so.1.3.9
Looks natural but is not ABI compatible with libvirt.so.0.x.y

The fix is to set CURRENT to always be exactly the same
as AGE. We want to have the major version reflected in
the so symlinks though. So then we set AGE to MAJOR*1000+MINOR
eg, so 1.3.9 would create libvirt.so.0.1003.9 and libvirt
2.51.3 would create libvirt.so.0.2051.3
2012-08-14 10:59:02 +01:00
Martin Kletzander
43bfa23e6f json: fix interface locale dependency
libvirt creates invalid commands if wrong locale is selected. For
example with locale that uses comma as a decimal point, JSON commands
created with decimal numbers are invalid because comma separates the
entries in JSON. Fortunately even when decimal point is affected,
thousands grouping is not, because for grouping to be enabled with
*printf, there has to be an apostrophe flag specified (and supported).

This patch adds specific internal function for converting doubles to
strings with C locale.
2012-08-14 07:30:14 +02:00
Eric Blake
1f6f723ce1 build: add stubs so mdns code can be unconditionally compiled
The recent changes to the testsuite to validate exported symbols
flushed out a case of unconditionally exporting symbols that
were only conditionally compiled under HAVE_AVAHI.

* src/Makefile.am (libvirt_net_rpc_server_la_SOURCES): Compile
virnetservermdns unconditionally.
* configure.ac (HAVE_AVAHI): Drop unused automake conditional.
* src/rpc/virnetservermdns.c: Add fallbacks when Avahi is not
present.
2012-08-02 13:35:21 -06:00
Daniel P. Berrange
7a054e99e2 Avoid clash of base64 symbols
On Debian/Ubuntu, one of the libraries libvirt (indirectly) links
with exports a symbol named 'base64_encode'. This takes precedence
over GNULIB's base64_encode function during linking. Unfortunately
they of course have different API semantics. To avoid this problem
use a few #defines in config.h to rename the GNULIB provided
function to have a 'libvirt_gl_' prefix
2012-08-02 14:22:47 +01:00
Daniel P. Berrange
0c9fd4cfe9 Rewrite virAtomic APIs using GLib's atomic ops code
There are a few issues with the current virAtomic APIs

 - They require use of a virAtomicInt struct instead of a plain
   int type
 - Several of the methods do not implement memory barriers
 - The methods do not implement compiler re-ordering barriers
 - There is no Win32 native impl

The GLib library has a nice LGPLv2+ licensed impl of atomic
ops that works with GCC, Win32, or pthreads.h that addresses
all these problems. The main downside to their code is that
the pthreads impl uses a single global mutex, instead of
a per-variable mutex. Given that it does have a Win32 impl
though, we don't expect anyone to seriously use the pthread.h
impl, so this downside is not significant.

* .gitignore: Ignore test case
* configure.ac: Check for which atomic ops impl to use
* src/Makefile.am: Add viratomic.c
* src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic
  ops APIs and plain int datatype
* src/util/viratomic.h: inline impls of all atomic ops
  for GCC, Win32 and pthreads
* src/util/viratomic.c: Global pthreads mutex for atomic
  ops
* tests/viratomictest.c: Test validate to validate safety
  of atomic ops.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-08-02 11:50:59 +01:00
Dmitry Guryanov
cafc26ff5f parallels: add driver skeleton
Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.

More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.

Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
2012-08-01 11:44:26 +08:00
Sebastian Wiedenroth
29bc4fe646 Add a sheepdog backend for the storage driver
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.

A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.

A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.

In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.

  <disk type='network'>
    ...
    <source protocol="sheepdog" name="vdi_name">
      <host name="localhost" port="7000"/>
    </source>
  </disk>

To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.

Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
2012-07-18 20:08:27 +01:00
Cole Robinson
2d98ee5b35 configure: rbd doesn't need -lcrypto
See https://www.redhat.com/archives/libvir-list/2012-July/msg00493.html

Basically building against librbd doesn't seem to actually require -lcrypto.

Also report the rbd linker flags in configure output
2012-07-17 09:49:53 -04:00
Daniel Veillard
3a4d9d1ed3 Release of libvirt-0.9.13
* configure.ac docs/news.html.in libvirt.spec.in: new version and
  documentation update
* po/*.po*: updated and regenerated localizations
2012-07-02 11:25:36 +08:00
Marc-André Lureau
b29f9bbe49 configure: show correct default argument in help
Pushed without ack, under the trivial rule.
2012-06-28 02:37:27 +02:00
Daniel P. Berrange
6a714d31d0 Switch automated builds to use Mingw64 toolchain instead of Mingw32
The Mingw32 toolchain is broadly obsoleted by the Mingw64 toolchain.
The latter has been adopted by Fedora 17 and newer. Maintaining a
RPM spec for Mingw32 is a needless burden, so switch to a Mingw64
RPM spec (which provides 32 & 64 bit builds).

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-06-25 10:41:10 +01:00
Eric Blake
350583c859 build: hoist qemu dependence on yajl to configure
Commit 6e769eba made it a runtime error if libvirt was compiled
without yajl support but targets a new enough qemu.  But enough
users are hitting this on self-compiled libvirt that it is worth
erroring out at compilation time, rather than an obscure failure
when trying to use the built executable.

* configure.ac: If qemu is requested and -version works, require
yajl when qemu version is new enough.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Add
comment.
2012-06-15 19:49:00 -06:00
Eric Blake
3c3644d30f build: ensure storage driver is used
Commit 1c275e9a accidentally dropped the storage driver from
libvirtd, because it depended on a C preprocessor macro that
was not defined.  Furthermore, if you do './configure
--without-storage-dir --with-storage-disk' or any other combination
where you explicitly build a subset of storage backends excluding
the dir backend, then the build is broken.

Based on analysis by Osier Yang.

* configure.ac (WITH_STORAGE): Define top-level conditional.
* src/Makefile.am (mod_LTLIBRARIES): Build driver even when
storage_dir is disabled.
* daemon/libvirtd.c: Pick up storage driver for any backend, not
just dir.
* daemon/Makefile.am (libvirtd_LDADD): Likewise.
2012-06-06 12:16:07 +08:00
Eric Blake
fb59cf7a58 build: fix testing of augeas files in VPATH builds
Without this fix, a VPATH build (such as used by ./autobuild.sh)
fails with messages like:

make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/daemon'
../../build-aux/augeas-gentest.pl libvirtd.conf ../../daemon/test_libvirtd.aug.in test_libvirtd.aug
cannot read libvirtd.conf: No such file or directory at ../../build-aux/augeas-gentest.pl line 38.

Since the test files are not part of the tarball, we can generate
them into the build dir, but rather than create a subdirectory
just for the test file, it is easier to test them directly in
libvirt.git/src.

* daemon/Makefile.am (AUG_GENTEST): Factor out definition.
(test_libvirtd.aug): Look for correct file.
* src/Makefile.am (AUG_GENTEST): Use $(PERL).
(qemu/test_libvirtd_qemu.aug, lxc/test_libvirtd_lxc.aug)
(locking/test_libvirt_sanlock.aug): Rename to avoid subdirectories.
(check-augeas-qemu, check-augeas-lxc, check-augeas-sanlock): Reflect
location of built tests.
* configure.ac (PERL): Substitute perl.
2012-05-30 09:29:32 -06:00
Eric Blake
1d22ba953b build: silence libtool during tests
Libtool is picky about linking against a module library (aka a .so);
giving lots of warnings like this in the tests directory:

  CCLD   networkxml2argvtest

*** Warning: Linking the executable networkxml2argvtest against the loadable module
*** libvirt_driver_network.so is not portable!

Fix that by splitting things into a convenience library which can
be used directly by the tests, and making the real .so just wrap
the convenience library.

Based on a suggestion by Daniel P. Berrange.

* configure.ac (--with-driver-modules): Fix help test.
* src/Makefile.am (libvirt_driver_xen.la, libvirt_driver_libxl.la)
(libvirt_driver_qemu.la, libvirt_driver_lxc.la)
(libvirt_driver_uml.la): Factor into new convenience libraries.
* tests/Makefile.am (xen_LDADDS, qemu_LDADDS, lxc_LDADDS)
(networkxml2argvtest_LDADD): Link to convenience libraries, not
shared libraries.
2012-05-28 07:19:25 -06:00
Daniel P. Berrange
7cd77b6b2f Fix Win32 build by linking to ole32
The CoTaskMemFree function requires the ole32 DLL to be
linked against. Currently this is only done for the
VirtualBox driver. Also add it to libvirt_util.la

* configure.ac: Unconditionally add ole32 DLL to Win32
* src/Makefile.am: Link old32 to libvirt_util.la
2012-05-28 12:35:39 +01:00
Jim Meyering
0d07aa512c maint: avoid new automake warning about AM_PROG_CC_STDC
* configure.ac (AM_PROG_CC_STDC): Stop using this macro.
It provokes warnings from newer automake and is superseded by
autoconf's AC_PROG_CC, which we're already using.
2012-05-26 14:25:42 +02:00
Daniel P. Berrange
ff0f6a0e79 Default to enable driver modules for libvirtd
Always enable driver modules for libvirtd, if we have dlopen
available. This allows more modular packaging by distros
and ensures we don't break this config

* configure.ac: Default to enable driver modules

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-24 13:18:01 +01:00
Daniel P. Berrange
6cd4b1fe16 Remove libvirt_test.la library
The libvirt_test.la library was introduced to allow test suites
to reference internal-only symbols. These days, nearly every
symbol we care about is in src/libvirt_private.syms, so there
is no need for libvirt_test.la to continue to exist

* src/Makefile.am: Delete libvirt_test.la & add new .syms files
* src/libvirt_private.syms: Export symbols needed by test suite
* tests/Makefile.am: Link to libvirt_test.la. Ensure LXC tests link
  to network_driver.la
* src/libvirt_esx.syms, src/libvirt_openvz.syms: Add exports needed
  by test suite
2012-05-24 13:18:00 +01:00
Wido den Hollander
74951eadef storage backend: Add RBD (RADOS Block Device) support
This patch adds support for a new storage backend with RBD support.

RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.

It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.

To function this backend relies on librbd and librados being present on the
local system.

The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.

For storing credentials it uses the built-in secret mechanism of libvirt.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2012-05-21 12:37:38 -06:00
Daniel P. Berrange
7ba66ef285 Fix build compat with older libselinux for LXC
Most versions of libselinux do not contain the function
selinux_lxc_contexts_path() that the security driver
recently started using for LXC. We must add a conditional
check for it in configure and then disable the LXC security
driver for builds where libselinux lacks this function.

* configure.ac: Check for selinux_lxc_contexts_path
* src/security/security_selinux.c: Disable LXC security
  if selinux_lxc_contexts_path() is missing
2012-05-16 15:38:29 +01:00
Daniel P. Berrange
548563956e Allow stack traces to be included with log messages
Sometimes it is useful to see the callpath for log messages.
This change enhances the log filter syntax so that stack traces
can be show by setting '1:+NAME' instead of '1:NAME'.

This results in output like:

2012-05-09 14:18:45.136+0000: 13314: debug : virInitialize:414 : register drivers
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xd6)[0x7f89188ebe86]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]

2012-05-09 14:18:45.136+0000: 13314: debug : virRegisterDriver:775 : driver=0x7f8918d02760 name=Test
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virRegisterDriver+0x6b)[0x7f89188ec717]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(+0x11b3ad)[0x7f891891e3ad]
/home/berrange/src/virt/libvirt/src/.libs/libvirt.so.0(virInitialize+0xf3)[0x7f89188ebea3]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x431921]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x3a21e21735]
/home/berrange/src/virt/libvirt/tools/.libs/lt-virsh[0x40a279]

* docs/logging.html.in: Document new syntax
* configure.ac: Check for execinfo.h
* src/util/logging.c, src/util/logging.h: Add support for
  stack traces
* tests/testutils.c: Adapt to API change

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-15 17:01:40 +01:00
Daniel Veillard
a25d5cfd80 Release of libvirt-0.9.12
* configure.ac docs/news.html.in libvirt.spec.in: updates for the release
* po/*.po: pushed new sources and synchronized new languages translations
2012-05-14 10:52:04 +08:00
Osier Yang
eecee94c3a build: Fix the typo in configure.ac
s/nuamd/numad/,
2012-05-10 10:28:12 +08:00
Osier Yang
b0f3244554 numad: Check numactl-devel if compiled with numad support
Since now we pre-set memory policy using libnuma to fully
drive numad, it needs to check numactl-devel if "with_numad"
is "yes".

configure with groups "--with-numad=yes --with-numactl=yes",
"--with-numad=no --with-numactl=yes", "--with-numad=yes
--with-numactl=yes" works fine after the change.
2012-05-09 13:12:32 +08:00
Serge Hallyn
60fb8a22ee build: support libnl-3
configure.ac: check for libnl-3 in addition to libnl-1

src/Makefile.am: link against libnl when needed

src/util/virnetlink.c:
support libnl3 api.  To minimize impact on code flow, wrap the
differences under the virNetlink* namespace.

Unfortunately libnl3 moves netlink/msg.h to
/usr/include/libnl3/netlink/msg.h, so the LIBNL_CFLAGS need to be added
to a bunch of places where they weren't needed with libnl1.

Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2012-05-03 14:59:57 -06:00
Cole Robinson
ddd6bef4dc configure: Use ustar format for dist tarball
Since for stable releases, some test files were over the 99 char
limit for traditional tar filenames.

Suggested by Osier here:
https://www.redhat.com/archives/libvir-list/2012-April/msg01435.html

Signed-off-by: Cole Robinson <crobinso@redhat.com>
2012-04-27 12:36:30 -04:00
Eric Blake
bae13129c1 build: fix bootstrap on RHEL
Commit 8fe455fd36 tried to work around
a regression introduced in upstream gnulib that requires gettext 0.18
or newer on all projects using bootstrap, by making libvirt require
gettext 0.18.  But this fails on RHEL 6.2, which still ships gettext
0.17.  Revert that change, and instead, import the latest round of
gnulib updates that fix that problem properly.

If you have already built in the window where libvirt required 0.18,
be aware that incremental updates may run into problems: this is
because 'autopoint --force' will not downgrade m4/po.m4 back to an
older version, but it must be downgraded back to 0.17 levels to work
with this patch.  You may either manually remove that file then rerun
bootstrap, or it may prove easier to just clean up all non-git files
to start from a clean slate.

* bootstrap.conf: Revert minimum gettext back to 0.17.
* configure.ac: Likewise.
* .gnulib: Update to latest, for bootstrap fixes.
* bootstrap: Resync from gnulib.
2012-04-25 16:25:49 -06:00
Peter Krempa
8fe455fd36 build: Fix version of gettext macros
Commit c9cd419cab added copying of the
makefile for translation files from gnulib. The makefile from gnulib is
of version 0.18 but the build configuration cretes macros from version
0.17 which breaks the build with message:

*** error: gettext infrastructure mismatch: using a Makefile.in.in from
gettext version 0.18 but the autoconf macros are from gettext version
0.17
2012-04-24 11:35:09 +02:00
Daniel P. Berrange
2223ea984c The policy kit and HAL node device drivers both require a
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.

The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.

Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
2012-04-19 17:03:10 +01:00
Guido Günther
a2996926e3 Fix macvtap detection by also checking for IFLA_VF_MAX
since this isn't available on older kernels such as Debian Squeeze's
2.6.32. This make --with-macvtap=check work as expected.
2012-04-15 11:54:20 +02:00
Daniel P. Berrange
e7eca6e4be Don't install sysctl file on non-Linux hosts
* configure.ac: Set WITH_SYSCTL only on Linux hosts
* daemon/Makefile.am: Conditionalize install-sysctl using WITH_SYSCTL

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Cc: Jason Helfman <jhelfman@e-e.com>
2012-04-04 19:31:40 +01:00
Daniel Veillard
782afa98e4 Release of libvirt 0.9.11
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated a number of languages translation including new
  indian languages and regenerated
2012-04-03 15:06:37 +08:00
Daniel P. Berrange
851117bd7a Enable all warnings permanently & default to -Werror for GIT builds
Given that we auto-detect whether each -Wxxxx flag is supported by
GCC, and we are warning-free and use automake silent rules, there
is no compelling reason to allow compile warnings to be disabled.

Replace the --enable-compile-warnings flag with a simpler
--enable-werror flag, which defaults to 'yes' if building
from GIT, or 'no' if building from tar.gz

This helps ensure that everyone writing patches for libvirt will
take care to fix their warning problems before submitting for
review

* autobuild.sh: Force -Werror
* configure.ac: Update for LIBVIRT_COMPILE_WARNINGS macro change
* m4/virt-compile-warnings.m4: Permanently enable all warnings,
  auto-enable Werror for GIT builds
2012-03-27 17:08:06 +01:00
Daniel P. Berrange
3a2fc2770b Enable build of test suite programs by default for GIT checkouts
Add a new flag '--with-test-suite' to configure to control whether
the test suite binaries are built by default. ie built with a
plain 'make', as opposed to delayed until 'make check'

For builds from tar.gz tests will not be built by default. For
builds from GIT, tests with be on by default, to try and ensure
that patch developers don't accidentally break the test suites
without noticing.

* configure.ac: Add --with-test-suite
* tests/Makefile.am: Use noinst_PROGRAMS instead of check_PROGRAMS
  if building tests by default. Consolidate setting of TESTS and
  {noinst,check}_PROGRAMS to avoid duplication
2012-03-27 17:08:06 +01:00
Daniel P. Berrange
eb8f31c16b Detect location fo selinux mount point
The SELinux mount point moved from /selinux to /sys/fs/selinux
when systemd came along.

* configure.ac: Probe for SELinux mount point
* src/lxc/lxc_container.c: Use SELinux mount point determined
  by configure.ac
2012-03-27 15:52:25 +01:00
Osier Yang
beb76e3742 spec: Add missed dependancy for numad
numad is available since Fedora 17 and RHEL6.X. And it's not supported
on s390[x] and ARM.
2012-03-24 09:35:20 +08:00
Osier Yang
0f8e7ae33a qemu: Support numad
numad is an user-level daemon that monitors NUMA topology and
processes resource consumption to facilitate good NUMA resource
alignment of applications/virtual machines to improve performance
and minimize cost of remote memory latencies. It provides a
pre-placement advisory interface, so significant processes can
be pre-bound to nodes with sufficient available resources.

More details: http://fedoraproject.org/wiki/Features/numad

"numad -w ncpus:memory_amount" is the advisory interface numad
provides currently.

This patch add the support by introducing a new XML attribute
for <vcpu>. e.g.

  <vcpu placement="auto">4</vcpu>
  <vcpu placement="static" cpuset="1-10^6">4</vcpu>

The returned advisory nodeset from numad will be printed
in domain's dumped XML. e.g.
  <vcpu placement="auto" cpuset="1-10^6">4</vcpu>

If placement is "auto", the number of vcpus and the current
memory amount specified in domain XML will be used for numad
command line (numad uses MB for memory amount):
  numad -w $num_of_vcpus:$current_memory_amount / 1024

The advisory nodeset returned from numad will be used to set
domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity).

If the user specifies both CPU affinity policy (e.g.
(<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto"
the specified CPU affinity will be overridden.

Only QEMU/KVM drivers support it now.

See docs update in patch for more details.
2012-03-15 12:24:56 +08:00
Peter Krempa
3f4238d771 util: Add helpers for safe domain console operations
This patch adds a set of functions used in creating console streams for
domains using PTYs and ensures mutually exclusive access to the PTYs.

If mutually exclusive access is not used, two clients may open the same
console, which results in corruption on both clients as both of them
race to read data from the PTY.

Two approaches are used to ensure this:
1) Internal data structure holding open PTYs.
        This is used internally and enables the user to forcibly
        terminate another console connection eg. when somebody leaves
        the console open on another host.

2) UUCP style lock files:
        This uses UUCP lock files according to the  FHS
        ( http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLOCKLOCKFILES )
        to check if other programs (like minicom) are not using the pty
        device of the console.

        This feature is disabled by default and may be enabled using
        configure parameter
        --with-console-lock-files=/path/to/lock/file/directory
        or --with-console-lock-files=auto (which tries to infer the
        location from OS used (currently only linux).

        On usual linux systems, normal users may not write to the
        /var/lock directory containing the locks. This poses problems
        while in session mode. If the current user has no access to the
        lockfile directory, check for presence of the file is still
        done, but no lock file is created. This does NOT result in an
        error.
2012-02-27 15:05:17 +01:00
Daniel P. Berrange
1d4c4d9d4f Workaround python header file insanity
The /usr/include/python/pyconfig.h file pollutes the global
namespace with a huge number of HAVE_XXX and WITH_XXX
defines. These change what we detected in our own config.h
In particular if you try to build without DTrace, python's
headers turn it back on with predictable fail.

THe hack to workaround this is to rename WITH_DTRACE to
WITH_DTRACE_PROBES to avoid the namespace clash
2012-02-24 16:43:27 +00:00
Michal Privoznik
2b38e59bd8 configure: Define program name if not found
AC_CHECK_PROG checks for program in given path. However, if it doesn't
exists, [variable] is set to [value-if-not-found]. We don't want this
to be the empty string in case of 'modprobe' and 'scrub' as we want to
fallback to runtime detection.
2012-02-22 12:28:27 +01:00
Michal Privoznik
286088567d storage: Allow runtime detection of scrub
Currently, if scrub (used for wiping algorithms) is not present
at compile time, we don't support any other wiping algorithms than
zeroing, even if it was installed later. Switch to runtime detection
instead.
2012-02-16 09:09:43 +01:00
Ansis Atteka
df81004632 network: support Open vSwitch
This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
        <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

or if libvirt should auto-generate the interfaceid use
following syntax:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

It is also possible to pass an optional profileid. To do that
use following syntax:

   <interface type='bridge'>
     <source bridge='ovsbr'/>
     <mac address='00:55:1a:65:a2:8d'/>
     <virtualport type='openvswitch'>
       <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
                   profileid='test-profile'/>
     </virtualport>
   </interface>

To create Open vSwitch bridge install Open vSwitch and
run the following command:

    ovs-vsctl add-br ovsbr
2012-02-15 16:04:54 -05:00
Daniel Veillard
bca060a363 Release of libvirt-0.9.10
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: update ja, it and uk localization, fixed the ja one
2012-02-13 22:31:31 +08:00
Michal Privoznik
adb99a05b1 storage: Support different wiping algorithms
Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.
2012-01-26 13:59:30 +01:00
Eric Blake
4c18acffd7 build: skip lxc with too-old glibc
Since we already require the kernel to be new enough to support
LO_FLAGS_AUTOCLEAR, we might as well also require glibc to be
new enough to support epoll_create1().

* configure.ac (with_lxc): We require glibc 2.9 for LXC.
Reported and tested by Philipp Hahn.
2012-01-23 06:50:28 -07:00
Daniel P. Berrange
ba61012cfc Disable netcf if building without libvirtd
Although the netcf interface driver can in theory be used by
the stateless drivers, in practice none of them want to use
it because they have different ways of dealing with interfaces.

Furthermore, if you have mingw32-netcf installed, then the
libvirt mingw32 build will fail with

  ../../src/interface/netcf_driver.c:644:5: error: unknown field 'close_used_without_including_unistd_h' specified in initializer

 * configure.ac: disable netcf if built without libvirtd
2012-01-11 15:01:54 +00:00
Daniel Veillard
2f667b5697 Release of libvirt-0.9.9
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated localizations from transifex and regenerated
2012-01-07 12:18:06 +08:00
Eric Blake
307f363509 build: drop check for ANSI compiler
Using automake.git (will become 1.12 someday), I got this error:

configure.ac:90: error: automatic de-ANSI-fication support has been removed
/usr/local/share/aclocal-1.11a/protos.m4:13: AM_C_PROTOTYPES is expanded from...
configure.ac:90: the top level
autom4te: /usr/bin/m4 failed with exit status: 1

In short, pre-C89 compilers are no longer a viable portability
target.  Besides, our code base already requires C99, so worrying
about pre-C89 seems pointless.

* configure.ac (AM_C_PROTOTYPES): Drop, since newer automake no
longer provides it.
2012-01-05 14:21:11 -07:00
Eric Blake
f9d60b1946 build: disable dtrace on non-Linux builds
Using dtrace (and systemtap in general) is Linux-specific.
Running ./autobuild.sh shows that attempting a cross-build to
target mingw was mistakenly trying to build dtrace code, merely
because it was present on the compilation host.

* configure.ac (with_dtrace): Don't attempt to use dtrace when
doing a cross-build hosted on Linux but targetting elsewhere.
Reported by Daniel P. Berrange.
2011-12-16 08:46:41 -07:00
Daniel Veillard
7c6b0653f3 Release of libvirt-0.9.8
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: fetched localization update and regenerated
2011-12-08 15:13:50 +08:00
Daniel P. Berrange
949e10911a Fix build for platforms lacking struct ifreq
This ought to fix the build if you have net/if.h but do
not have struct ifreq

* configure.ac: Check for struct ifreq in net/if.h
* src/util/virnetdev.c: Conditionalize to avoid use of
  struct ifreq if it does not exist
2011-12-01 11:01:49 -07:00
Daniel P. Berrange
3ec1289896 Add internal APIs for dealing with time
The logging APIs need to be able to generate formatted timestamps
using only async signal safe functions. This rules out using
gmtime/localtime/malloc/gettimeday(!) and much more.

Introduce a new internal API which is async signal safe.

  virTimeMillisNowRaw replacement for gettimeofday. Uses clock_gettime
                      where available, otherwise falls back to the unsafe
                      gettimeofday

  virTimeFieldsNowRaw  replacements for gmtime(), convert a timestamp
  virTimeFieldsThenRaw into a broken out set of fields. No localtime()
                       replacement is provided, because converting to
                       local time is not practical with only async signal
                       safe APIs.

  virTimeStringNowRaw  replacements for strftime() which print a timestamp
  virTimeStringThenRaw into a string, using a pre-determined format, with
                       a fixed size buffer (VIR_TIME_STRING_BUFLEN)

For each of these there is also a version without the Raw postfix
which raises a full libvirt error. These versions are not async
signal safe

* src/Makefile.am, src/util/virtime.c, src/util/virtime.h: New files
* src/libvirt_private.syms: New APis
* configure.ac: Check for clock_gettime in -lrt
* tests/virtimetest.c, tests/Makefile.am: Test new APIs
2011-11-30 11:43:49 +00:00
Chang Liu
3c5405149b storage: Fallback to use lvchange first if lvremove fails
virStorageBackendLogicalDeleteVol() could not remove the lv with error
"could not remove open logical volume" sometimes. Generally it's caused
by the volume is still active, even if lvremove tries to remove it with
option "--force".

This patch is to fix it by disbale the lv first using "lvchange -aln"
and "lvremove -f" afterwards if the direct "lvremove -f" failed.
2011-11-22 15:24:25 +08:00
Daniel P. Berrange
4789fb2e4e Add support for systemd init service
This patch adds support for a systemd init service for libvirtd
and libvirt-guests. The libvirtd.service is *not* written to use
socket activation, since we want libvirtd to start on boot so it
can do guest auto-start.

The libvirt-guests.service is pretty lame, just exec'ing the
original init script for now. Ideally we would factor out the
functionality, into some shared tool.

Instead of

  ./configure --with-init-script=redhat

You can now do

  ./configure --with-init-script=systemd

Or better still:

  ./configure --with-init-script=systemd+redhat

We can also now support install of the upstart init script

* configure.ac: Add systemd, and systemd+redhat options to
  --with-init-script option
* daemon/Makefile.am: Install systemd services
* daemon/libvirtd.sysconf: Add note about unused env variable
  with systemd
* daemon/libvirtd.service.in: libvirtd systemd service unit
* libvirt.spec.in: Add scripts to installing systemd services
  and migrating from legacy init scripts
* tools/Makefile.am: Install systemd services
* tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in
* tools/libvirt-guests.service.in: systemd service unit
2011-11-18 16:16:02 +00:00
Daniel P. Berrange
e49c9bf25c Split bridge.h into three separate files
Following the renaming of the bridge management APIs, we can now
split the source file into 3 corresponding pieces

 * src/util/virnetdev.c: APIs for any type of network interface
 * src/util/virnetdevbridge.c: APIs for bridge interfaces
 * src/util/virnetdevtap.c: APIs for TAP interfaces

* src/util/virnetdev.c, src/util/virnetdev.h,
  src/util/virnetdevbridge.c, src/util/virnetdevbridge.h,
  src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied
  from bridge.{c,h}
* src/util/bridge.c, src/util/bridge.h: Split into 3 pieces
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/openvz/openvz_driver.c, src/qemu/qemu_command.c,
  src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h,
  src/uml/uml_driver.c: Update #include directives
2011-11-09 16:34:25 +00:00
Daniel P. Berrange
c1df2c14b5 Remove usage of brctl command line tool
Convert the virNetDevBridgeSetSTP and virNetDevBridgeSetSTPDelay
to use ioctls instead of spawning brctl.

Implement the virNetDevBridgeGetSTP and virNetDevBridgeGetSTPDelay
methods which were declared in the header but never existed

* src/util/bridge.c: Convert to use bridge ioctls instead of brctl
2011-11-09 16:33:53 +00:00
Daniel Veillard
ab4823a062 Release of libvirt-0.9.7
* confiure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: update localizations and rebuilt
2011-11-08 14:55:25 +08:00
Eric Blake
9d86cbcf5f build: fix linking on BSD
While building on FreeBSD (and after fixing a ptsname_r link error),
I got this failure:

./.libs/libvirt_util.a(libvirt_util_la-threads.o)(.text+0x240): In function `virThreadCreate':
util/threads-pthread.c:185: undefined reference to `pthread_create'

It turns out that gnulib used only pthread_join for LIB_PTHREAD,
but on FreeBSD, libc provides that (as a stub function); whereas
the more complex pthread_create really does require -pthread,
which gnulib tracked under [LT]LIBMULTITHREAD.

* configure.ac (LIBS): Check LIBMULTITHREAD alongside LIB_PTHREAD.
* src/Makefile.am (THREAD_LIBS): New variable.
(libvirt_util_la_LIBADD, libvirt_lxc_LDADD): Use it.
2011-11-04 16:43:37 -06:00
Eric Blake
2dee896593 build: avoid RHEL 5 build failure on LXC
Per the discussion here, LXC on RHEL 5 makes no sense.
https://www.redhat.com/archives/libvir-list/2011-September/msg01169.html

* configure.ac (with_lxc): Reject RHEL 5.x LXC as too old.
2011-10-26 10:11:50 -06:00
Eric Blake
9cf70dad0f build: use gnulib fdatasync
Commit 1726a73 hacked around MacOS' lack of fdatasync, since
gnulib did not have it at the time.  But now that we use newer
gnulib, we can avoid the hack.

* bootstrap.conf (gnulib_modules): Add fdatasync.
* configure.ac (AC_CHECK_FUNCS_ONCE): Drop our own check.
2011-10-25 09:48:34 -06:00
Daniel Veillard
508de7eedb Release of libvirt-0.9.6 2011-09-22 14:53:23 +08:00
Daniel Veillard
a362f1f7aa Release of libvirt-0.9.5
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: fetch updated translations from transifex and rebuilt
2011-09-20 14:17:47 +08:00
Daniel P. Berrange
19ff0ddfbb Update to require sanlock 1.8 for license compliance
Inexplicably the sanlock code all got placed under the GPLv2-only,
so libvirt's use of sanlock introduces a license incompatibility.
The sanlock developers have now rearranged the code such that there
is a 'sanlock_client.so' which is LGPLv2+ while their daemon remains
GPLv2-only. To use the new client library we need to call the new
sanlock_init and sanlock_align APIs instead of sanlock_direct_init
and sanlock_direct_align. These APIs calls are now routed via the
sanlock daemon, instead of doing direct I/O calls to disk.

For all this we require sanlock >= 1.8

* configure.ac: Check for sanlock_client.so instead of sanlock.so
  and fix various comments
* libvirt.spec.in: Mandate sanlock >= 1.8
* src/Makefile.am: Link to -lsanlock_client
* src/locking/lock_driver_sanlock.c: Use sanlock_init and
  sanlock_align
2011-09-20 11:18:54 +08:00
Eric Blake
1726a736fb build: work around lack of MacOS fdatasync
Mingw lacks fsync, but gnulib provides that.  Meanwhile, gnulib does
not (yet) provide fdatasync, so this is a quick hack to fake that
function on MacOS X; we can revert this configure change once gnulib
gives us a real module.

We have been implicitly relying on gnulib's largefile module being
pulled in by other modules, but it's better to make that explicit.

* bootstrap.conf (gnulib_modules): Add fsync.  Make largefile use
explicit.
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for fdatasync, and
fake it with fsync when not present.
2011-09-16 17:42:28 -06:00
Daniel P. Berrange
8e44e5593e Prevent crash from dlclose() of libvirt.so
When libvirt calls virInitialize it creates a thread local
for the virErrorPtr storage, and registers a callback to
cleanup memory when a thread exits. When libvirt is dlclose()d
or otherwise made non-resident, the callback function is
removed from memory, but the thread local may still exist
and if a thread later exists, it will invoke the callback
and SEGV. There may also be other thread locals with callbacks
pointing to libvirt code, so it is in general never safe to
unload libvirt.so from memory once initialized.

To allow dlclose() to succeed, but keep libvirt.so resident
in memory, link with '-z nodelete'. This issue was first
found with the libvirt CIM provider, but can potentially
hit many of the dynamic language bindings which all ultimately
involve dlopen() in some way, either on libvirt.so itself,
or on the glue code for the binding which in turns links
to libvirt

* configure.ac, src/Makefile.am: Ensure libvirt.so is linked
  with -z nodelete
* cfg.mk, .gitignore, tests/Makefile.am, tests/shunloadhelper.c,
  tests/shunloadtest.c: A test case to unload libvirt while
  a thread is still running.
2011-09-16 15:51:31 -06:00
Osier Yang
660cb2530f storage: Add mkfs and libblkid to build system 2011-09-02 21:16:50 +08:00
Matthias Bolte
f2e7064373 hyperv: Add configure check for OpenWSMAN 2011-08-26 17:52:54 +02:00
Matthias Bolte
099d30a825 Fix detection of GnuTLS 1.x.y
Detection based on gnutls_session doesn't work because GnuTLS 2.x.y
comes with a compat.h that defines gnutls_session to gnutls_session_t.

Instead detect this based on LIBGNUTLS_VERSION_MAJOR. Move this from
configure/config.h to gnutls_1_0_compat.h and make sure that all users
include gnutls_1_0_compat.h properly.

Also fix header guard in gnutls_1_0_compat.h.
2011-08-03 19:22:29 +02:00
Daniel Veillard
14c2ca3db9 Release of libvirt-0.9.4
* configure.ac docs/news.html.in libvirt.spec.in: updates for new
  release
* po/*.po*: pulled translations from the transifex teams and regenerated
  localizations
2011-08-03 11:02:42 +08:00
Eric Blake
e4047f0a10 build: allow caching the input to STATIC_ANALYSIS
Right now, every re-run of configure re-evaluates whether a
static analysis tool is in use.  But if you run configure under
coverity, make a tweak, and then do an incremental rebuild with
gcc but not coverity to test the tweak, then rerun a build under
coverity, then configure does not get rerun, and static analysis
ends up with lots of false positives.

This patch caches the static analysis result, and also makes it
easier to force static analysis even if the existing checks are
insufficient to detect newer versions of the static analyzer tools.

* configure.ac (lv_cv_static_analysis): New cache variable.
2011-08-02 15:01:32 -06:00
Matthias Bolte
b590866bdb freebsd: Fix build problem due to picking up the wrong libvirt.h
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location.  But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.

Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first.  Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.

Signed-off-by: Eric Blake <eblake@redhat.com>
2011-07-29 07:35:54 -06:00
Eric Blake
ff81956ac6 maint: add missing copyright notices
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.

* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
2011-07-28 15:01:17 -06:00
Michal Privoznik
90074ecfa7 bandwidth: Implement functions to enable and disable QoS
These function executes 'tc' with appropriate arguments to set
desired QoS setting on interface or bridge during its creation.
2011-07-25 13:49:55 +08:00
Eric Blake
5283ea9b1d tests: fix compilation failures
Even though gnutls is a hard-req for libvirt, and gnutls depends
on libtasn1, that does not mean that you have to have the libtasn1
development files installed.  Skip the test rather than failing
compilation in that case.

With newer gcc, the test consumed too much stack space.  Move
things to static storage to fix that.

* configure.ac (AC_CHECK_HEADERS): Check for libtasn1.h.
(HAVE_LIBTASN1): New automake conditional.
* tests/Makefile.am (virnettlsconvirnettlscontexttest_SOURCES)
(virnettlscontexttest_LDADD): Allow compilation without libtasn1.
* tests/virnettlscontexttest.c: Skip test if headers not present.
(struct testTLSCertReq): Alter time members.
(testTLSGenerateCert): Reflect the change.
(mymain): Reduce stack usage.
2011-07-25 13:48:26 +08:00
Eric Blake
12291656b1 save: let iohelper work on O_DIRECT fds
Required for a coming patch where iohelper will operate on O_DIRECT
fds.  There, the user-space memory must be aligned to file system
boundaries (at least 512, but using page-aligned works better, and
some file systems prefer 64k).  Made tougher by the fact that
VIR_ALLOC won't work on void *, but posix_memalign won't work on
char * and isn't available everywhere.

This patch makes some simplifying assumptions - namely, output
to an O_DIRECT fd will only be attempted on an empty seekable
file (hence, no need to worry about preserving existing data
on a partial block, and ftruncate will work to undo the effects
of having to round up the size of the last block written), and
input from an O_DIRECT fd will only be attempted on a complete
seekable file with the only possible short read at EOF.

* configure.ac (AC_CHECK_FUNCS_ONCE): Check for posix_memalign.
* src/util/iohelper.c (runIO): Use aligned memory, and handle
quirks of O_DIRECT on last write.
2011-07-21 16:24:08 -06:00
Jim Fehlig
b8adfcc60c Fix build when using polkit0
V2: Remove policy kit references from virNetServer and use DBus APIs
    directly, if available.
2011-07-12 08:44:55 -06:00
Jim Fehlig
41828514bb Skip some xen tests if xend is not running
Currently, the xen statstest and reconnect tests are only compiled
if xend is running.  Compile them unconditionally if xen headers
are present, but skip the tests at runtime if xend is not running.

This is in response to Eric's suggestion here

https://www.redhat.com/archives/libvir-list/2011-July/msg00367.html
2011-07-07 17:23:09 -06:00
Eric Blake
8437e738fa build: use gnulib pthread_sigmask
Gnulib finally learned how to do pthread_sigmask on mingw.

* .gnulib: Update to latest, for pthread_sigmask.
* bootstrap.conf (gnulib_modules): Add pthread_sigmask.
* configure.ac (AC_CHECK_FUNCS): Drop redundant check.
* src/rpc/virnetclient.c (virNetClientSetTLSSession)
(virNetClientIOEventLoop): Make code unconditional.
* src/util/command.c (virFork): Likewise.
* tools/virsh.c (doMigrate, cmdMigrate): Likewise.
2011-07-07 13:12:44 -06:00
Daniel Veillard
7976d96dd7 Release of libvirt-0.9.3
* configure.ac docs/news.html.in libvirt.spec.in: update for the
  new release
* po/*.po*: updated and regenerated localizations
2011-07-04 15:54:36 +08:00
Daniel P. Berrange
df0b57a95a Convert libvirtd over to the new RPC handling APIs
This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work

As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.

* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
  old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
  code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
  APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
  code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la
2011-06-28 17:33:19 +01:00
Daniel P. Berrange
58b5b14e5e Introduce a generic object for using network sockets
Introduces a simple wrapper around the raw POSIX sockets APIs
and name resolution APIs. Allows for easy creation of client
and server sockets with correct usage of name resolution APIs
for protocol agnostic socket setup.

It can listen for UNIX and TCP stream sockets.

It can connect to UNIX, TCP streams directly, or indirectly
to UNIX sockets via an SSH tunnel or external command

* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Generic
  sockets APIs
* tests/Makefile.am: Add socket test
* tests/virnetsockettest.c: New test case
* tests/testutils.c: Avoid overriding LIBVIRT_DEBUG settings
* tests/ssh.c: Dumb helper program for SSH tunnelling tests
2011-06-24 11:48:18 +01:00
Matthias Bolte
20991b937b configure: Make libnl optional unless macvtap is required
If macvtap is required then libnl has to be available, otherwise
libnl is optional.
2011-06-23 11:51:00 -04:00
Matthias Bolte
bfbeafbd5d Fix dlopen dependency
Since the addition of the lock manager framework in 6a943419c5
dlopen is always required, but the checks in configure wasn't changed
to reflect that. This didn't show up directly because the VirtualBox
driver linking dlopen in covered it. But disabling the VirtualBox
driver makes the build fail due to missing dlopen.

Change the dlopen check in configure to pick up dlopen when available.

Reported by Ruben Kerkhof.
2011-06-13 14:19:56 -06:00
Eric Blake
28ea3bf31c build: detect Coverity 5.3.0
Coverity 5.3.0 still outputs lots of COVERITY_* variables, but no
longer modifies COVERITY_BUILD_COMMAND in the environment.  Pick
one that seems likely to stay around.

* configure.ac (STATIC_ANALYSIS): Detect newer Coverity.
2011-06-08 04:47:05 -06:00
Osier Yang
31967cff04 build: Fix typos in configure.ac 2011-06-08 15:07:24 +08:00
Daniel Veillard
2c5ded6e82 Release of libvirt-0.9.2
* configure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: updated translations and regenerated
2011-06-06 11:46:37 +08:00
Daniel P. Berrange
ebfb8c4243 Add call to sanlock_restrict() in QEMU lock driver
In between fork and exec, a connection to sanlock is acquired
and the socket file descriptor is intionally leaked to the
child process. sanlock watches this FD for POLL_HANGUP to
detect when QEMU has exited. We don't want a rogus/compromised
QEMU from issuing sanlock RPC calls on the leaked FD though,
since that could be used to DOS other guests. By calling
sanlock_restrict() on the socket before exec() we can lock
it down.

* configure.ac: Check for sanlock_restrict API
* src/locking/domain_lock.c: Restrict lock acquired in
  process startup phase
* src/locking/lock_driver.h: Add VIR_LOCK_MANAGER_ACQUIRE_RESTRICT
* src/locking/lock_driver_sanlock.c: Add call to sanlock_restrict
  when requested by VIR_LOCK_MANAGER_ACQUIRE_RESTRICT flag
2011-06-02 17:23:44 +01:00
Daniel P. Berrange
9f135031ff Add a plugin for the 'sanlock' project
Sanlock is a project that implements a disk-paxos locking
algorithm. This is suitable for cluster deployments with
shared storage.

* src/Makefile.am: Add dlopen plugin for sanlock
* src/locking/lock_driver_sanlock.c: Sanlock driver
* configure.ac: Check for sanlock
* libvirt.spec.in: Add a libvirt-lock-sanlock RPM
2011-06-02 10:54:01 +01:00
Matthias Bolte
32abd5ee26 remote generator: Legacy support for hyper to long mappings
Remove some special case code that took care of mapping hyper to the
correct C types.

As the list of procedures that is allowed to map hyper to long is fixed
put it in the generator instead annotations in the .x files. This
results in simpler .x file parsing code.

Use macros for hyper to long assignments that perform overflow checks
when long is smaller than hyper. Map hyper to long long by default.

Suggested by Eric Blake.
2011-06-01 15:51:01 +02:00
Matthias Bolte
e85a602bb7 openvz: Automatically disable on non-Linux systems
As OpenVZ is Linux specific.
2011-05-31 09:03:06 +02:00
Michal Privoznik
9c6000579b interface: Implement driver methods for network config transaction API
This is the functionality at the end of the libvirt part of the call
chain - for each function, the corresponding netcf API is called.
2011-05-27 14:33:59 -04:00
Matthias Bolte
95cc5e5908 Allow to explicitly disable the secrets a directory storage driver 2011-05-25 18:31:14 +02:00
Eric Blake
0bb6e15515 build: require newer gettext
Now that RHEL 5.6 ships with gettext 0.17, we can get out of the
stone age and use the newer gettext capabilities and improved
macros for certain configure tests.

* configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.17.
(MKINSTALLDIRS): Delete hack that is no longer needed.
* bootstrap.conf (buildreq): Check for minimum gettext version.
Based on a report by Wen Congyang.
2011-05-19 17:54:47 -06:00
Dirk Herrendorefer
5252a06d65 Add support for 'passthru' mode for direct network interfaces
starting with kernel 2.6.38 macvtap supports a 'passthru' mode for
attaching virtual functions of a SRIOV capable network card directly to a VM.
This patch adds the capability to configure such a device.

Signed-off-by: Dirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
2011-05-18 08:15:08 -06:00
Eric Blake
d4982b86d2 build: drop unused <sys/syslimits.h> header
<sys/syslimits.h> is not standardized, so portable programs should
not need to rely on it.  If there really is something that we need
where <sys/syslimits.h> provided the limit but <limits.h> did not,
then that would be a candidate for fixing in gnulib.  But this patch
did not turn up any compilation failures on Linux.

* src/internal.h (includes): Drop unused header.
* daemon/libvirtd.h (includes): Likewise.
* configure.ac (AC_CHECK_HEADERS): Likewise.
Based on a report by Matthias Bolte.
2011-05-17 09:34:11 -06:00
Matthias Bolte
6593a5cbfd configure: Fix mpath check on non-Linux systems 2011-05-14 06:40:01 +02:00
Wen Congyang
1ba6e2d926 build: avoid compiler warning during configure
There is no need to redefine _GNU_SOURCE in tests that occur after
gl_INIT, since that macro already AC_DEFINE'd it for us.

Signed-off-by: Eric Blake <eblake@redhat.com>
2011-05-12 08:50:01 -06:00
Christophe Fergeau
29d753c8d5 fix xdr detection and use with recent glibc
glibc 2.13.90 has obsoleted its rpc implementation in favour of
the one provided by the TI-RPC library:

> * The RPC implementation in libc is obsoleted.  Old programs keep working
>   but new programs cannot be linked with the routines in libc anymore.
>   Programs in need of RPC functionality must be linked against TI-RPC.
>   The TI-RPC implemtation is IPv6 enabled and there are other benefits.
>
>   Visible changes of this change include (obviously) the inability to
>   link
>   programs using RPC functions without referencing the TI-RPC library,
>   the
>   removal of the RPC headers from the glibc headers, and the lack of
>   symbols defined in <rpc/netdb.h> when <netdb.h> is installed.
>   Implemented by Ulrich Drepper.
(from glibc NEWS)

Thus with recent glibc, we need to try linking with -ltirpc when looking
for the XDR functions. The daemon also needs to use XDR_CFLAGS to be able
to find the XDR headers stored in /usr/include/tirpc.

When using TI-RPC, there are some warnings about redundant declarations, but
the fix probably belongs in other modules:

/usr/include/tirpc/rpc/rpcent.h:68:13: warning: redundant redeclaration of
'setrpcent' [-Wredundant-decls]
/usr/include/rpc/netdb.h:53:13: note: previous declaration of 'setrpcent'
was here

/usr/include/tirpc/rpc/rpcent.h:69:13: warning: redundant redeclaration of
'endrpcent' [-Wredundant-decls]
/usr/include/rpc/netdb.h:54:13: note: previous declaration of 'endrpcent'
was here

/usr/include/tirpc/rpc/rpc.h:84:12: warning: redundant redeclaration of
'bindresvport' [-Wredundant-decls]
/usr/include/netinet/in.h:440:12: note: previous declaration of
'bindresvport' was here
2011-05-11 14:56:57 -06:00
Daniel P. Berrange
9f5d3a912d Add support for YAJL version 2 API/ABI
Version 2.0.0 or yajl changed API. It is fairly trivial for us to
cope with both APIs in libvirt, so adapt.

* configure.ac: Probe for yajl2 API
* src/util/json.c: Conditional support for yajl2 API
2011-05-11 09:35:10 +01:00
Daniel Veillard
9b889aacef Release of libvirt-0.9.1
* configure.ac libvirt.spec.in docs/news.html.in: update and document
  the release
* po/*.po*: update localizations for german, polish, spanish, ukrainian
  and vietnamese coming from transifex, regenerate
2011-05-05 11:25:13 +08:00
Eric Blake
2ffa8b341c maint: detect clang 2.9
In Fedora 15, with clang 2.8, 'scan-build env' shows:
CCC_ANALYZER_ANALYSIS=-analyzer-check-objc-mem -analyzer-check-security-syntactic -analyzer-check-dead-stores -analyzer-check-objc-unused-ivars -analyzer-check-objc-methodsigs

But in rawhide, with clang 2.9, the same variable is set but
empty, implying the default set of analysis.  We still want
sa_assert defined in that case, to stop clang from hitting
false positives.

* configure.ac (STATIC_ANALYSIS): Detect clang even when the set
of analyses is the default.
2011-05-04 17:22:22 -06:00
Jiri Denemark
3a55213252 build: Use pkg-config for libssh2 check
Currently the build fails if /usr/local/include does not exist since
its use is hardcoded in configure.ac
2011-04-28 14:26:24 +02:00
Jiri Denemark
14c8dc841b build: Ignore old audit library
Check for audit_encode_nv_string in libaudit so that ancient audit
library is ignored rather than trying to compile with libaudit support
and failing.
2011-04-28 14:25:27 +02:00
Osier Yang
53cb23f426 build: Fix problem of building Python bindings
If one specify "--with-python=yes" but no python-devel package
is installed, we ignore it with just a notice message, which
doesn't give clear guide to user.
2011-04-27 21:07:14 +08:00
Daniel P. Berrange
0e867555bd Use gnulib's manywarnings & warnings modules
Remove custom code for checking compiler warnings, using
gl_WARN_ADD instead. Don't list all flags ourselves, use
gnulib's gl_MANYWARN_ALL_GCC to get all possible GCC flags,
then turn off the ones we don't want yet.

* acinclude.m4: Rewrite to use gl_WARN_ADD and gl_MANYWARN_ALL_GCC
* bootstrap.conf: Add warnings & manywarnings
* configure.ac: Switch to gl_WARN_ADD
* m4/compiler-flags.m4: Obsoleted by gl_WARN_ADD
2011-04-05 11:39:35 +01:00
Daniel Veillard
d17e438ad3 Release of libvirt-0.9.0
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update polish translation and regenerate
2011-04-04 20:15:45 +08:00
Markus Groß
0244977180 Implements domainXMLTo/FromNative in libxl driver
* src/Makefile.am src/libvirt_private.syms configure.ac: share and
  reuse the sexpr routines from sexpr.h of the old xen driver
* src/libxl/libxl_driver.c: implements libxlDomainXMLFromNative and
  libxlDomainXMLToNative
2011-03-29 20:57:02 +08:00
Daniel P. Berrange
4591df766d Remove the Open Nebula driver
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.

Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.

The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.

Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.

* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
  ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
  src/opennebula/one_conf.c, src/opennebula/one_conf.h,
  src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
  files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
  build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
  to OpenNebula
* docs/drvone.html.in: Delete file
2011-03-28 14:09:11 +01:00
Osier Yang
ab8984e482 Fix syntax error in configure.ac
Which will lead "./configure --with-audit=yes" breaks.
2011-03-28 18:05:32 +08:00
Eric Blake
b5a048ed68 build: shorten libxenlight summary for consistent alignment
* configure.ac: Use xenlight: rather than libxenlight: in summary.
Suggested by Daniel Veillard.
2011-03-25 09:06:18 -06:00
Jim Fehlig
e36804ce86 Don't build libxenlight driver for Xen 4.0
The libxenlight driver does not build against the tech preview
version of libxenlight in Xen 4.0.  Only enable building the
driver against more complete libxenlight found in Xen 4.1.
2011-03-18 15:35:47 -06:00
Jim Fehlig
2b84e445d5 Add libxenlight driver
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0.  The driver is stateful and runs
privileged only.

Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI.  Driver selection is based on the status
of xend.  If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified.  If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.

V6:
 - Address several code style issues noted by Daniel Veillard
 - Make drive work with xen:/// URI
 - Hold domain object reference while domain is injected in
   libvirt event loop.  Race found and fixed by Markus Groß.

V5:
 - Ensure events are unregistered when domain private data
   is destroyed.  Discovered and fixed by Markus Groß.

V4:
 - Handle restart of libvirtd, reconnecting to previously
   started domains
 - Rebased to current master
 - Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)

V3:
  - Reserve vnc port within driver when autoport=yes

V2:
  - Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
  - Rebased to current master
  - Plug memory leaks found by Stefano Stabellini and valgrind
  - Handle SHUTDOWN_crash domain death event

[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
2011-03-18 08:57:48 -06:00
Daniel P. Berrange
bd82db4057 Add compat function for geteuid()
* configure.ac: Check for geteuid()
* src/util/util.h: Compat for geteuid()
2011-03-15 15:26:35 +00:00
Daniel P. Berrange
3c37a171a2 Add check for kill() to fix build of cgroups on win32
The kill() function doesn't exist on Win32, so it needs to be
checked for at build time & code disabled in cgroups

* configure.ac: Check for kill()
* src/util/cgroup.c: Stub out virCGroupKill* functions
  when kill() isn't available
2011-02-28 14:13:58 +00:00
Wen Congyang
606d63054c check device-mapper when building with mpath or disk storage driver
Currently, we need virIsDevMapperDevice() when we build libvirt with
disk or mpath storage drivers.  So we should check device-mapper-devel
when we build with disk storage driver but without mpath storage
driver.
2011-02-21 15:17:12 -07:00
Eric Blake
7b6286b780 build: fix broken mingw cross-compilation
Two regressions:
Commit df1011ca broke builds for systems that lack devmapper
(non-Linux, as well as Linux with ./autogen.sh --without-libvirtd
and without the libraries present).
Commit ce6fd650 broke cross-compilation, due to a gnulib bug.

* .gnulib: Update to latest, for cross-compilation fix.
* src/util/util.c (virIsDevMapperDevice): Provide stub for
platforms not using storage driver.
* configure.ac (devmapper): Arrange to define HAVE_LIBDEVMAPPER_H.
devmapper issue reported by Wen Congyang.
2011-02-18 12:02:22 -07:00
Eric Blake
1c07233436 build: speed up non-maintainer builds
* configure.ac (gl_ASSERT_NO_GNULIB_POSIXCHECK): Use to reduce
time spent in configure.
2011-02-18 09:04:22 -07:00
Osier Yang
df1011ca8e storage: Allow to delete device mapper disk partition
The name convention of device mapper disk is different, and 'parted'
can't be used to delete a device mapper disk partition. e.g.

Name                 Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1

Error: Expecting a partition number.

This patch introduces 'dmsetup' to fix it.

Changes:
  - New function "virIsDevMapperDevice" in "src/utils/utils.c"
  - remove "is_dm_device" in "src/storage/parthelper.c", use
    "virIsDevMapperDevice" instead.
  - Requires "device-mapper" for 'with-storage-disk" in "libvirt.spec.in"
  - Check "dmsetup" in 'configure.ac' for "with-storage-disk"
  - Changes on "src/Makefile.am" to link against libdevmapper
  - New entry for "virIsDevMapperDevice" in "src/libvirt_private.syms"

Changes from v1 to v3:
  - s/virIsDeviceMapperDevice/virIsDevMapperDevice/g
  - replace "virRun" with "virCommand"
  - sort the list of util functions in "libvirt_private.syms"
  - ATTRIBUTE_NONNULL(1) for virIsDevMapperDevice declaration.

e.g.

Name                 Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1

Vol /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 deleted

Name                 Path
-----------------------------------------
2011-02-17 15:29:07 +08:00
Daniel Veillard
43f8773c1f Release of libvirt-0.8.8
* configure.ac docs/news.html.in libvirt.spec.in: bump version and add docs
* po/*.po*: updated Gujarati, Polish and Dutch localisations and regenerated
2011-02-17 12:11:03 +08:00
Matthias Bolte
251ad3b28b Avoid empty strings when --with-packager(-version) is not specified
Make with_packager and with_packager_version default to "no". This way
--without-packager-version (as shorthand for --with-packager(-version)=no)
works correctly too.

Prior to this patch libvirt outputs a line like this when
--with-packager(-version) was not specified

# ./daemon/libvirtd
14:11:15.018: 31796: info : libvirt version: 0.8.8, package:  ()

Now the unspecified parts are correctly omitted.

Reported by Osier Yang.
2011-02-15 19:48:44 +01:00
Daniel P. Berrange
cee61fc298 Imprint all logs with version + package build information
The logging functions are enhanced so that immediately prior to
the first log message being printed to any output channel, the
libvirt package version will be printed.

eg

 $ LIBVIRT_DEBUG=1 virsh
 18:13:28.013: 17536: info : libvirt version: 0.8.7
 18:13:28.013: 17536: debug : virInitialize:361 : register drivers
 ...

The 'configure' script gains two new arguments which can be
used as

   --with-packager="Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10"
   --with-packager-version="1.fc14"

to allow distros to append a custom string with package specific
data.

The RPM specfile is modified so that it appends the RPM version,
the build host, the build date and the packager name.

eg

 $ LIBVIRT_DEBUG=1 virsh
 18:14:52.086: 17551: info : libvirt version: 0.8.7, package: 1.fc13 (Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10)
 18:14:52.086: 17551: debug : virInitialize:361 : register drivers

Thus when distro packagers receive bug reports they can clearly
see what version was in use, even if the bug reporter mistakenly
or intentionally lies about version/builds

* src/util/logging.c: Output version data prior to first log message
* libvirt.spec.in: Include RPM release, date, hostname & packager
* configure.ac: Add --with-packager & --with-packager-version args
2011-02-11 14:13:08 +00:00
Eric Blake
59b34f139d build: fix parted detection at configure time
* configure.ac (PARTED_FOUND): Issue configure error if
--with-storage-disk=yes but no parted is found.
2011-02-01 09:05:05 -07:00
Eric Blake
c5b11b3cc4 build: use more gnulib modules for simpler code
* .gnulib: Update to latest, for sigpipe and sigaction modules.
* bootstrap.conf (gnulib_modules): Add siaction, sigpipe, strerror_r.
* tools/virsh.c (vshSetupSignals) [!SIGPIPE]: Delete, now that
gnulib guarantees it.
(SA_SIGINFO): Define for mingw fallback.
* src/util/virterror.c (virStrerror): Simplify, now that gnulib
guarantees the POSIX interface.
* configure.ac (AC_CHECK_FUNCS_ONCE): Drop redundant check.
(AM_PROG_CC_STDC): Move earlier, to keep autoconf happy.
2011-01-18 15:35:41 -07:00
Guido Günther
dda24845fe Add AM_MAINTAINER_MODE
and keep it enabled by default. This allows downstreams to turn it off
via:

./configure --disable-maintainer-mode

as discussed in

https://www.redhat.com/archives/virt-tools-list/2010-October/msg00049.html
2011-01-07 20:22:24 +01:00
Daniel Veillard
6675e00744 Release of libvirt-0.8.7
* configure.ac libvirt.spec.in docs/news.html.in: bump version and add
  documentation
* po/*po*: regenerate po and pot files
2011-01-04 03:37:17 +01:00
Laine Stump
d596c6dc9b new virSetUIDGID() utility function
virSetUIDGID() sets both the real and effective group and user of the
process, and additionally calls initgroups() to assure that the
process joins all the auxiliary groups that the given uid is a member
of.
2010-12-23 16:48:26 -05:00
Laine Stump
8090a56890 Run radvd for virtual networks with IPv6 addresses
Running an instance of the router advertisement daemon (radvd) allows
guests using the virtual network to automatically acquire an IPv6
address and default route. Note that acquiring an address only works
for networks with a prefix length of exactly 64 - radvd is still run
in other circumstances, and still advertises routes, but autoconf will
not work because it requires exactly 64 bits of address info from the
network prefix.

This patch avoids a race condition with the pidfile by manually
daemonizing radvd rather than allowing it to daemonize itself, then
creating our own pidfile (in addition to radvd's own file, which is
unnecessary, but there is no way to tell radvd to not create it). This
is accomplished by exec'ing it with "--debug 1" in the commandline,
and using virCommand's features to fork, create a pidfile, and detach
from the newly forked process.
2010-12-23 15:55:05 -05:00
Laine Stump
537e65e7b7 Update iptables.c to also support ip6tables.
All of the iptables functions eventually call down to a single
bottom-level function, and fortunately, ip6tables syntax (for all the
args that we use) is identical to iptables format (except the
addresses), so all we need to do is:

1) Get an address family down to the lowest level function in each
   case, either implied through an address, or explicitly when no
   address is in the parameter list, and

2) At the lowest level, just decide whether to call "iptables" or
   "ip6tables" based on the family.

The location of the ip6tables binary is determined at build time by
autoconf. If a particular target system happens to not have ip6tables
installed, any attempts to run it will generate an error, but that
won't happen unless someone tries to define an IPv6 address for a
network. This is identical behavior to IPv4 addresses and iptables.
2010-12-23 15:54:32 -05:00
Laine Stump
20718b8bcb Replace brSetInetAddress/brSetInetNetmask with brAddInetAddress
brSetInetAddress can only set a single IP address on the bridge, and
uses a method (ioctl(SIOCSETIFADDR)) that only works for IPv4. Replace
it and brSetInetNetmask with a single function that uses the external
"ip addr add" command to add an address/prefix to the interface - this
supports IPv6, and allows adding multiple addresses to the interface.

Although it isn't currently used in the code, we also add a
brDelInetAddress for completeness' sake.

Also, while we're modifying bridge.c, we change brSetForwardDelay and
brSetEnableSTP to use the new virCommand API rather than the
deprecated virRun, and also log an error message in bridge_driver.c if
either of those fail (previously the failure would be completely
silent).
2010-12-23 15:53:26 -05:00
Wen Congyang
9a4af303fc fix syntax error in configure.ac
When I run configure, I receive some syntax error.

.....
checking where to find <rpc/rpc.h>... none
checking for library containing dlopen... -ldl
/configure: line 52500: test: =: unary operator expected
/configure: line 52766: test: =: unary operator expected
checking linux/kvm.h usability... yes
checking linux/kvm.h presence... yes
.....

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2010-12-23 09:29:41 -07:00
Matthias Bolte
42b2f35d36 esx: Move VMX handling code out of the driver directory
Now the VMware driver doesn't depend on the ESX driver anymore.

Add a WITH_VMX option that depends on WITH_ESX and WITH_VMWARE.
Also add a libvirt_vmx.syms file.

Move some escaping functions from esx_util.c to vmx.c.

Adapt the test suite, ESX and VMware driver to the new code layout.
2010-12-21 22:40:17 +01:00
Eric Blake
da24a892f2 build: make building on cygwin easier
* configure.ac (dlopen): Cygwin dlopen is in libc; avoid spurious
failure.
(XDR_CFLAGS): Define when needed.
* src/Makefile.am (libvirt_driver_remote_la_CFLAGS): Use it.
2010-12-20 11:14:27 -07:00
Eric Blake
8e2b26db94 build: allow older libselinux again
* configure.ac (with_selinux): Check for <selinux/label.h>.
* src/security/security_selinux.c (getContext): New function.
(SELinuxRestoreSecurityFileLabel): Use it to restore compilation
when using older libselinux.
2010-12-20 10:26:15 -07:00
Eric Blake
8837d3c7de build: allow autoconf 2.59 again
Autoconf 2.59 doesn't define ${localedir}, so libvirt was failing
to compile due to a missing LOCALEDIR until today's configmake fix.

* .gnulib: Update to latest for configmake fix.
* configure.ac (libpcap): Avoid AS_CASE.
2010-12-20 10:18:54 -07:00
Matthias Bolte
448347f8b0 vbox: Add glue layer for MSCOM on Windows
Don't require dlopen, but link to ole32 and oleaut32 on Windows.

Don't expose g_pVBoxFuncs anymore. It was only used to get the
version of the API. Make VBoxCGlueInit return the version instead.
This simplifies the implementation of the MSCOM glue layer.

Get the VirtualBox version from the registry.

Add a dummy implementation of the nsIEventQueue to the MSCOM glue
as there seems to be no direct equivalent with MSCOM. It might be
implemented using the normal window message loop. This requires
additional investigation.
2010-12-17 22:51:33 +01:00
Jean-Baptiste Rouault
cddd2a0628 Add VMware Workstation and Player driver 2010-12-17 21:19:39 +01:00
Eric Blake
65532f4558 maint: improve tests distribution
* tests/Makefile.am (EXTRA_DIST): Sort, and add directories.
(SUBDIRS): Drop automake recursion into subdirs.
* tests/commanddata/Makefile.am: Delete.
* tests/confdata/Makefile.am: Likewise.
* tests/sexpr2xmldata/Makefile.am: Likewise.
* tests/xencapsdata/Makefile.am: Likewise.
* tests/xmconfigdata/Makefile.am: Likewise.
* tests/xml2sexprdata/Makefile.am: Likewise.
2010-12-17 11:57:11 -07:00
Diego Elio Pettenò
30a4ee84c4 build: quote AC_LANG_PROGRAM to avoid warnings with autoconf 2.68 2010-12-13 11:01:15 -07:00
Diego Elio Pettenò
0b9ab2abf1 build: properly handle ./configure --with-libpcap
Without this fix, ./configure --with-libpcap will cause --with-libpcap=yes
to be implicitly passed down, which cause yes/bin/pcap-config to be
searched for rather than /usr/bin/pcap-config.

Also output pcap: no when pcap is not found or disabled.
2010-12-13 11:01:11 -07:00
Eric Blake
2a5ccbefb0 build: distribute commandtest files
* tests/Makefile.am (SUBDIRS): Add commanddata.
* tests/commandtest.c (checkoutput): Delete correct file.
(test4): Delete pid file.
(mymain): Delete unused variable.
* tests/commanddata/Makefile.am: New file.
* configure.ac (AC_OUTPUT): Build new makefile.
Reported by Dominik Klein.
2010-12-10 08:44:53 -07:00
Justin Clift
b113d279ee configure: improve misleading libnl missing error message
This fixes a misleading error message saying the libnl package
needs to be installed, when it's really the libnl-devel package
needing to be installed.
2010-12-08 14:21:58 +11:00
Daniel Veillard
a33db6cbfb Release of libvirt 0.8.6
- configure.ac libvirt.spec.in: bump version, add a missing systemtap
  build requirement
- docs/news.html.in: add informations about the release
- po/*: updated Polish and Dutch localizations, and regenerated
- tests/qemuxml2argvtest.c: Fix build problem
2010-11-30 20:42:46 +01:00
Daniel P. Berrange
9288c31bf7 Include a thread identifier in log messages
To allow messages from different threads to be untangled,
include an integer thread identifier in log messages.

* src/util/logging.c: Include thread ID
* src/util/threads.h, src/util/threads.h, src/util/threads-pthread.c:
  Add new virThreadSelfID() function
* configure.ac: Check for sys/syscall.h
2010-11-23 14:09:35 +00:00
Matthias Bolte
3bc0679f90 configure: Disable FS storage driver if mntent.h is not available
This is the case on FreeBSD.
2010-11-14 22:21:26 +01:00
Matthias Bolte
09c8c2e3ed configure: Remove bashism and replace 'test ==' with 'test ='
This also fixes configure problems on FreeBSD, as test doesn't
understand '==' there.
2010-11-12 21:38:27 +01:00
Daniel P. Berrange
7c08fcc439 Add a generic internal API for handling any FD based stream
To avoid the need for duplicating implementations of virStream
drivers, provide a generic implementation that can handle any
FD based stream. This code is copied from the existing impl
in the QEMU driver, with the locking moved into the stream
impl, and addition of a read callback

The FD stream code will refuse to operate on regular files or
block devices, since those can't report EAGAIN properly when
they would block on I/O

* include/libvirt/virterror.h, include/libvirt/virterror.h: Add
  VIR_FROM_STREAM error domain
* src/qemu/qemu_driver.c: Remove code obsoleted by the new
  generic streams driver.
* src/fdstream.h, src/fdstream.c, src/fdstream.c,
  src/libvirt_private.syms: Generic reusable FD based streams
2010-11-11 16:02:57 +00:00
Matthias Bolte
e65812d479 xen-proxy: Remove it entirely and use libvirtd instead
Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.
2010-11-08 22:00:35 +01:00
Daniel Veillard
4c2b3e1d29 Release of libvirt-0.8.5
* configure.ac libvirt.spec.in: new version
* docs/news.html.in: update news page and improve format
* po/*.po*: Update po again
2010-10-29 16:54:07 +02:00
Matthias Bolte
f4a8542dd5 vbox: Stop hardcoding a single path for VBoxXPCOMC.so
This partly reverts df90ca7661.

Don't disable the VirtualBox driver when configure can't find
VBoxXPCOMC.so, rely on detection at runtime again instead.

Keep --with-vbox=/path/to/virtualbox intact, added to for:
https://bugzilla.redhat.com/show_bug.cgi?id=609185

Detection order for VBoxXPCOMC.so:

1. VBOX_APP_HOME environment variable
2. configure provided location
3. hardcoded list of known locations
4. dynamic linker search path

Also cleanup the glue code and improve error reporting.
2010-10-29 15:50:38 +02:00
Eric Blake
5ee03c25f7 build: fix shell detection bug
A missing shell was noisy, and the use of command to decipher a
shell's absolute path requires "" rather than ''.

* configure.ac (lv_cv_wrapper_shell): Fix logic errors if candidate
shell is not available.
* .gitignore: Ignore file created when /bin/sh is old dash.
Reported by Matthias Bolte.
2010-10-26 15:55:12 -06:00
Eric Blake
f22e670b4a qemu: work around dash 0.5.5 bug in managed save
Older dash mistakenly truncates regular files when using <> redirection;
this kills our use of double dd to reduce storage overhead when
saving qemu images.  But qemu insists on running a command through
/bin/sh, so we work around it by having qemu run $sh -c 'real command'
when we have a replacement $sh in mind.

* configure.ac (VIR_WRAPPER_SHELL): Define to a replacement shell,
if /bin/sh is broken on <> redirection.
* src/qemu/qemu_monitor.h (VIR_WRAPPER_SHELL_PREFIX)
(VIR_WRAPPER_SHELL_SUFFIX): New macros.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextMigrateToFile): Use
them.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMigrateToFile):
Likewise.
2010-10-26 09:31:42 -06:00
Justin Clift
ff9bbffcd9 docs: make the location of the xml catalog file a configure option
The default location for the XML catalog file, /etc/xml/catalog,
used when validating the generated html docs, isn't correct for
MacOS X.

This commit adds an option to the configure script, allowing the
default to be overridden:

  --with-xml-catalog-file=/path/to/xml/catalog/file
2010-10-27 02:22:14 +11:00
Daniel P. Berrange
4b16b9c77f Include socket address in client probe data
It is useful to know where the client is connecting from,
so include the socket address in probe data.

* daemon/libvirtd.h: Use virSocketAddr for storing client
  address and keep printable address handy for logging
* daemon/libvirtd.c: Include socket address in client
  connect/disconnect probes
* daemon/probes.d: Add socket address to probes
* examples/systemtap/client.stp: Print socket address
* src/util/network.h: Add sockaddr_un to virSocketAddr union
2010-10-22 12:00:45 +01:00
Daniel P. Berrange
968eb4e5cd Add dtrace static probes in libvirtd
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.

This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).

 # stap examples/systemtap/client.stp
  Client fd=44 connected readonly=0
  Client fd=44 auth polkit deny pid:24997,uid:500
  Client fd=44 disconnected
  Client fd=46 connected readonly=1
  Client fd=46 auth sasl allow test
  Client fd=46 disconnected

The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.

* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
  files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
  so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
  Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
2010-10-22 12:00:39 +01:00
Daniel P. Berrange
8f680ad3b8 Basic framework for auditing integration
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API

Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled

* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
  on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
  daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
  options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
  API for auditing messages
2010-10-19 17:31:31 +01:00
Eric Blake
8f11a9beb0 build: provide URL in 'configure --help'
* configure.ac (AC_INIT): Provide email and URL.
2010-10-14 05:51:01 -06:00
Eric Blake
2399597a7e build: fix mingw build
* .gnulib: Update to latest, for termios fix.
* configure.ac (AC_CHECK_HEADERS): Drop redundent check.
* bootstrap: Synchronize from upstream.
Reported by Daniel P. Berrange.
2010-10-14 05:51:01 -06:00
Justin Clift
577ad920d7 configure: disable network and storage-fs drivers on mac os x
Disabling these two drivers on MacOS X, where they are known to
not work, allows libvirt (including the daemon) to compile without
any further changes.
2010-10-06 00:29:58 +11:00
Justin Clift
8bd11f37c4 configure: tweak logic flow of virtport check
This fixes a small logic bug, where passing --without-macvtap
on the configure line, or otherwise indicating a lack of
support for macvtap, causes configure to bail.
2010-09-30 00:42:07 +10:00
Justin Clift
fc812dd974 mpath: disable devmapper-multipath checking on non-linux
The configure script was breaking on MacOS X unless passed:

  --without-storage-mpath

This patch leverages Stefan Bergers earlier work for nwfilter,
so non-linux systems don't even attempt to build multipath.
2010-09-30 00:25:19 +10:00
Stefan Berger
b502a6ebac Rework configure logic for virtualport support
In this patch I am reworking the logic around detecting virtual port support and requiring the libnl dependency.

- It requires --with-macvtap and displays an error in case of --without-macvtap --with-virtualport.
- It tests for availability of certain data in include files and displays an error in case the include file is not at the correct level and --with-virtualport was chosen
- displays 'checking' messages for macvtap and virtualport support and results
- libnl support is required when macvtap is found or requested; if libnl is not there, please supply without-macvtap
2010-09-29 07:56:26 -04:00
Justin Clift
637133bd54 virtualbox: fix a typo in the expected location on mac os x
Mac OS X provides an "/Applications" folder, not an "/Application" folder,
so installed VirtualBox wasn't being detected by default.

This 1 character patch fixes this.
2010-09-28 11:31:18 +10:00
Stefan Berger
2e7294df08 nwfilter: Don't compile nwfilter driver on other systems than Linux
Don't compile the nwfilter driver (instantiating the rules) on other systems than Linux.
2010-09-27 15:44:27 -04:00
Eric Blake
8a93dafc5f maint: silence warning from libtool
I got tired of seeing this.

config.status: executing libtool commands
/bin/rm: cannot remove `libtoolT': No such file or directory
config.status: executing po-directories commands

While I was at it, there were a couple other unused variables.

* configure.ac (RM, MV, TAR): Drop; nothing in libvirt directly uses
this, and assigning RM interferes with libtool.
2010-09-14 09:17:41 -06:00
Daniel Veillard
9a8e152fef Libvirt release 0.8.4
update news, spec and french localizaton
2010-09-10 17:24:36 +02:00
Daniel Veillard
6d57950932 Remove hack to get static binaries in DV environment 2010-09-09 17:06:00 +02:00
Eric Blake
af32c355c3 mingw: match recent changes in spec file
* libvirt.spec.in (%file): List new installed files.
* configure.ac (with_init_script): Assume default of none when
cross-compiling.
2010-09-07 11:17:13 -06:00
Eric Blake
4aaf0bbe60 vbox: add location used in rpmfusion release
* configure.ac (vbox_xpcomc_dir): Add another potential dir.
2010-08-19 16:18:11 -06:00