and stop erroneously equating NULL with "". The latter means that the
element has empty content, while the former means there was an error
during parsing (either internal with the parser, or the content of the
XML was bad).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainBlkioDeviceParseXML() calls xmlNodeGetContent() multiple
times in a loop, but can easily be refactored to call it once for all
element nodes, and then use the result of that one call in each of the
(mutually exclusive) blocks that previously each had their own call to
xmlNodeGetContent.
This is being done in order to reduce the number of changes needed in
an upcoming patch that will eliminate the lack of checking for NULL on
return from xmlNodeGetContent().
As part of the simplification, the while() loop has been changed into
a for() so that we can use "continue" without bypassing the
"node = node->next".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already allow controlling the initiator IQN for iSCSI based disks.
Add the same for host devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These variables are only used for assignment and have
no other effect.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Also remove the temporary variable - even virStringListCopy
aborts on OOM now.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The shmem 'name' specifies the shared memory path in '/dev/shm/',
however, we may need to change it to avoid filename conflict
when VM migrate to other host. This patch remove shmem name
consistency check.
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Role(master or peer) controls how the domain behaves on migration.
For more details about migration with ivshmem, see
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/system/ivshmem.rst;hb=HEAD
It's a optional attribute in libvirt, and qemu will choose default
role for ivshmem device if the user is not specified.
With device property 'role', the value can be 'master' or 'peer'.
- 'master' (means 'master=on' in qemu), the guest will copy
the shared memory on migration to the destination host.
- 'peer' (means 'master=off' in qemu), the migration is disabled.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Yang Hang <yanghang44@huawei.com>
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When trying to parse an XML with overlapping iothread scheduler
settings, the error message was rather confusing:
error: iothreadssched attributes 'vcpus' must not overlap
Pass the correct element name.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Pass the scheduler element name instead of trying to reconstructing
it from the attribute name.
This has the benefit of not mixing '%s' with regular text in
translatable strings as well as preventing the confusion when
the 's' marking the plural in the element name ('vcpus') is taken
as a first letter of the 'sched' suffix.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 7ea55a481d
Fixes: 99c5fe0e7c
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virDomainThreadSchedParseHelper is used for parsing both iothread
and vcpu scheduling settings. Rename its 'name' attribute to
make it obvious this refers to the attribute name, not the name of
the element (which is currently constructed from the attribute name).
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virPCIDeviceAddressPtr 'addr' is forgotten to be freed in the branch
'VIR_APPEND_ELEMENT() < 0'. Use g_autoptr instead.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The storage pool code now attempts to disable COW by default on btrfs,
but management applications may wish to override this behaviour. Thus we
introduce a concept of storage pool features:
<features>
<cow state='yes|no'/>
</features>
If the <cow> feature policy is set, it will be enforced. It will always
return an hard error if COW cannot be explicitly set or unset.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is only used in the ESX driver where, when set to "no", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
VMX conversion parts rewritten to apply on top of previously merged
support for type='generated|static'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Conver the code to the new approach which uses XPath to fetch known
elements rather than looping through all XML children.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use a switch statement which will not be omitted when adding potential
new types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the mdev subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the vHBA subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split up formatting of the '<address>' element rather that trying to
optimize it with formatting string hacks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the SCSI subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the PCI subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate out bits related to USB so that the logic isn't entangled in
multiple conditional statements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the formatter to the new multiple buffer based approach so that
we can easily separate it into formatters per subsys type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the config of an iSCSI hostdev in a virStorageSource structure.
Parse the private data portion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
iSCSI subsystem hostdevs store the data as a virStorageSource. Format
the private data part of the virStorageSource in the appropriate place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is only used in the ESX driver where, when set to "static", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All modified functions are similar, in all cases "cleanup" label is removed,
along with all the "goto" calls.
Signed-off-by: Nicolas Brignone <nmbrignone@gmail.com>
Reviewed-by: Laine Stump <laine@redhat.com>
There are several calls to virBufferFreeAndReset() when functions
encounter an error, but the caller never uses the virBuffer once an
error has been encountered (all callers detect error by looking at the
function return value, not the contents of the virBuffer being
operated on), and now that all virBuffers are auto-freed there is no
reason for the lower level functions like these to spend time freeing
a buffer that is guaranteed to be freed momentarily anyway.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every other caller of this function checks for an error return and
ends their formatting early if there is an error. This function
happily continues on its way.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The output of vcpupin and emulatorpin for a domain with vcpu
placement='static' is based on a default bitmap that contains
all possible CPUs in the host, regardless of the CPUs being offline
or not. E.g. for a Linux host with this CPU setup (from lscpu):
On-line CPU(s) list: 0,8,16,24,32,40,(...),184
Off-line CPU(s) list: 1-7,9-15,17-23,25-31,(...),185-191
And a domain with this configuration:
<vcpu placement='static'>1</vcpu>
'virsh vcpupin' will return the following:
$ sudo ./run tools/virsh vcpupin vcpupin_test
VCPU CPU Affinity
----------------------
0 0-191
This is benign by its own, but can make the user believe that all
CPUs from the 0-191 range are eligible for pinning. Which can lead
to situations like this:
$ sudo ./run tools/virsh vcpupin vcpupin_test 0 1
error: Invalid value '1' for 'cpuset.cpus': Invalid argument
This is exarcebated by the fact that 'virsh vcpuinfo' considers only
available host CPUs in the 'CPU Affinity' field:
$ sudo ./run tools/virsh vcpuinfo vcpupin_test
(...)
CPU Affinity: y-------y-------y-------(...)
This patch changes the default bitmap of vcpupin and emulatorpin, in
the case of domains with static vcpu placement, to all available CPUs
instead of all possible CPUs. Aside from making it consistent with
the behavior of 'vcpuinfo', users will now have one less incentive to
try to pin a vcpu in an offline CPU.
https://bugzilla.redhat.com/show_bug.cgi?id=1434276
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the name is 'vcpus', we will get 'vcpussched' instead of 'vcpusched'
in the error message as following:
... 19155 : vcpussched attributes 'vcpus' must not overlap
So we use 'vcpu' to replace 'vcpus'.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These APIs will be used by QEMU driver when building the command
line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are several restrictions, for instance @initiator and
@target have to refer to existing NUMA nodes (daa), @cache has to
refer to a defined cache level and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To cite ACPI specification:
Heterogeneous Memory Attribute Table describes the memory
attributes, such as memory side cache attributes and bandwidth
and latency details, related to the System Physical Address
(SPA) Memory Ranges. The software is expected to use this
information as hint for optimization.
According to our upstream discussion [1] this is exposed under
<numa/> as <cache/> under NUMA <cell/> and <latency> or
<bandwidth/> under numa/latencies.
1: https://www.redhat.com/archives/libvir-list/2020-January/msg00422.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU allows creating NUMA nodes that have memory only.
These are somehow important for HMAT.
With check done in qemuValidateDomainDef() for QEMU 2.7 or newer
(checked via QEMU_CAPS_NUMA), we can be sure that the vCPUs are
fully assigned to NUMA nodes in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is only one caller of virDomainNumaSetNodeCpumask() which
checks for the return value but because the function will return
NULL iff the @cpumask was NULL in the first place. But in that
place @cpumask can't be NULL because it was just allocated by
virBitmapParse().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two functions virDomainNumaDefCPUFormatXML() and
virDomainNumaDefCPUParseXML() which format and parse domain's
<numa/>. There is nothing CPU specific about them. Drop the
infix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is nothing domain specific about the function, thus it
should not have virDomain prefix. Also, the fact that it is a
static function makes it impossible to use from other files.
Move the function to virxml.c and drop the 'Domain' infix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The semantics of the backup operation don't strictly require that all
disks being backed up are part of the same incremental part (when a disk
was checkpointed/backed up separately or in a different VM), or even
they may not have a previous checkpoint at all (e.g. when the disk
was freshly hotplugged to the vm).
In such cases we can still create a common checkpoint for all of them
and backup differences according to configuration.
This patch adds a per-disk configuration of the checkpoint to do the
incremental backup from via the 'incremental' attribute and allows
perform full backups via the 'backupmode' attribute.
Note that no changes to the qemu driver are necessary to take advantage
of this as we already obey the per-disk 'incremental' field.
https://bugzilla.redhat.com/show_bug.cgi?id=1829829
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow enabling TLS for the NBD server used to do pull-mode backups. Note
that documentation already mentions 'tls', so this just implements the
schema and XML bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add fields for storing the aliases necessary to clean up the TLS env for
a backup job after it finishes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Avoid printing '0' size in case when we weren't able to determine the
backup size by adding a flag whether the size is valid and interlock
printing of the field according to the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Users may want to use this to create a full backup or even incremental
if the checkpoints are pre-existing. We still will not allow to create a
checkpoint on a read-only disk as that makes no sense.
https://bugzilla.redhat.com/show_bug.cgi?id=1840053
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The error: label in this function just does "return -1", so replace
all the "goto error" in the function with "return -1".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
AUTOPTR_CLEANUP_FUNC is set to xmlBufferFree() in util/virxml.h (This
is actually new - added accidentally (but fortunately harmlessly!) in
commit 257aba2daf. I had added it along with the hunks in this patch,
then decided to remove it and submit separately, but missed taking out
the hunk in virxml.h)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although libvirt itself uses g_malloc0() and friends, which exit when
there isn't enouogh memory, libxml2 uses standard malloc(), which just
returns NULL on OOM - this means we must check for NULL on return from
any libxml2 functions that allocate memory.
xmlBufferCreate(), for example, might return NULL, and we don't always
check for it. This patch adds checks where it isn't already done.
(NB: Although libxml2 has a provision for changing behavior on OOM (by
calling xmlMemSetup() to change what functions are used to
allocating/freeing memory), we can't use that, since parts of libvirt
code end up in libvirt.so, which is linked and called directly by
applications that may themselves use libxml2 (and may have already set
their own alternate malloc()), e.g. drivers like esx which live totally
in the library rather than a separate process.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In 076591009a a validation code was added to
virDomainDeviceInfoFormat() which reports an error if zPCI
address entered in was incomplete. But, there are two problems
with this approach.
The first problem is the placement of the code - it doesn't
belong into XML formatter rather than XML validator.
The second one is that at the point of formatting XML the post
parse callback has run and thus filled in required info.
Therefore this check can never do something useful and instead of
moving it into validator, it's removed completely.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 076591009a ("conf: fix zPCI address auto-generation on
s390") is doing a check for virZPCIDeviceAddressIsIncomplete()
prior to checking if the device has a ZPCI address at all. This
results in errors like these when starting libvirt:
error : virDomainDeviceInfoFormat:7527 : internal error:
Missing uid or fid attribute of zPCI address
Fix it by moving virZPCIDeviceAddressIsIncomplete() after the
check done by virZPCIDeviceAddressIsPresent().
Fixes: 076591009a
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The ZPCI device validation is specific to qemu. So, let us move the
ZPCI uid validation out of domain xml parsing into qemu domain device
validation.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let us fix the issues with zPCI address validation and auto-generation
on s390.
Currently, there are two issues with handling the ZPCI address
extension. Firstly, when the uid is to be auto-generated with a
specified fid, .i.e.:
...
<address type='pci'>
<zpci fid='0x0000001f'/>
</address>
...
we expect uid='0x0001' (or the next available uid for the domain).
However, we get a parsing error:
$ virsh define zpci.xml
error: XML error: Invalid PCI address uid='0x0000', must be > 0x0000
and <= 0xffff
Secondly, when the uid is specified explicitly with the invalid
numerical value '0x0000', we actually expect the parsing error above.
However, the domain is being defined and the uid value is silently
changed to a valid value.
The first issue is a bug and the second one is undesired behaviour, and
both issues are related to how we (in-band) signal invalid values for
uid and fid. So let's fix the XML parsing to do validation based on what
is actually specified in the XML.
The first issue is also related to the current code behaviour, which
is, if either uid or fid is specified by the user, it is incorrectly
assumed that both uid and fid are specified. This bug is fixed by
identifying when the user specified ZPCI address is incomplete and
auto-generating the missing ZPCI address.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's possible to use ramfb as the boot display of an assigned vgpu
device. This was introduced in 4b95738c, but unfortunately the attribute
was not formatted into the xml output for such a device. This patch
fixes that oversight and adds a xml2xml test to verify proper behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1847791
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A TPM Proxy device can coexist with a regular TPM, but the
current domain definition supports only a single TPM device
in the 'tpm' pointer. This patch replaces this existing pointer
in the domain definition to an array of TPM devices.
All files that references the old pointer were adapted to
handle the new array instead. virDomainDefParseXML() TPM related
code was adapted to handle the parsing of an extra TPM device.
TPM validations after this new scenario will be updated in
the next patch.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new aw_bits attribute to the iommu device to control
the address width of the intel-iommu
Signed-off-by Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In preparation to allow heterogenous backups store the 'incremental'
field per-disk and fill it by default from the per-backup field.
Having this will be important once we'll want to allow incremental
backup working while hotplugging a new disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With recent additions to the node device xml schema, an xml schema can
now describe a mdev device sufficiently for libvirt to create and start
the device using the mdevctl utility.
Note that some of the the configuration for a mediated device must be
passed to mdevctl as a JSON-formatted file. In order to avoid creating
and cleaning up temporary files, the JSON is instead fed to stdin and we
pass the filename /dev/stdin to mdevctl. While this may not be portable,
neither are mediated devices, so I don't believe it should cause any
problems.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to allow libvirt to create and start new mediated devices, we
need to be able to verify that the device has been started. In order to
do this, we'll need to save the UUID of newly-discovered devices within
the virNodeDevCapMdev structure. This allows us to search the device
list by UUID and verify whether the expected device has been started.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Mediated devices support arbitrary vendor-specific attributes that can
be attached to a mediated device. These attributes are ordered, and are
written to sysfs in order after a device is created. This patch adds
support for these attributes to the mdev data types and XML schema.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When parsing a nodedev xml file, the iommuGroup element should be
optional. This element should be read-only and is determined by the
device driver. While this is a change to existing behavior, it doesn't
break backwards-compatibility because it makes the parser less strict.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These helpers will be used in an auto-fill feature for incomplete
NUMA topologies in the next patch.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since a08669c31, @tsc is not automatically free'd by any g_auto* method.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Domains are now allowed to be pinned to host CPUs with IDs up to 16383.
The new limit is as arbitrary as the old one. It's just bigger.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was mostly boilerplate conversion, but in one case I needed to
define several differently named char* to take the place of a single
char *tmp that was re-used multiple times, and in another place there
was a single char* that was used at the toplevel of the function, and
then later used repeatedly inside a for loop, so I defined a new
separate char* inside the loop.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Historically IPv6 did not support NAT, so when IPv6 was added to
libvirt's virtual networks, when requesting <forward mode="nat"/>
libvirt will NOT apply NAT to IPv6 traffic, only IPv4 traffic.
This is an annoying historical design decision as it means we
cannot enable IPv6 automatically. We thus need to introduce a
new attribute
<forward mode="nat">
<nat ipv6="yes"/>
</forward>
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has -fw_cfg which allows users to tweak how firmware
configures itself and/or provide new configuration blobs.
Introduce new <sysinfo/> type "fwcfg" that will hold these
new blobs.
It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The attribute is only allowed for host-passthrough CPUs and it can be
used to request only migratable or all supported features to be enabled
in the virtual CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's no need to set ctxt->node outside of the function. The
function can set it itself - it has all the info needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
I think that since <qemu:commandline/> is kind of a hack, it
doesn't deserve place in the front row.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The previous fix accidentally picked up a debug change that put
alignment back at 4, not 8, bytes as it claimed:
commit 37ae042642
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jun 3 11:18:23 2020 +0100
conf: force 8 byte alignment for virObjectEvent
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need to be able to cast from virObjectEventPtr to one of
its many subclasses. Some of these subclasses have 8 byte
alignment on 32-bit platforms, but virObjectEventPtr only
has 4 byte alignment.
Previously the virObject base class had 8 byte alignment
but this dropped to 4 byte when converted to inherit from
GObject. This introduces cast alignment warnings on 32-bit:
../../src/conf/domain_event.c: In function 'virDomainEventDispatchDefaultFunc':
../../src/conf/domain_event.c:1656:30: error: cast increases required alignment of target type [-Werror=cast-align]
1656 | rtcChangeEvent = (virDomainEventRTCChangePtr)event;
| ^
../../src/conf/domain_event.c:1785:34: error: cast increases required alignment of target type [-Werror=cast-align]
1785 | balloonChangeEvent = (virDomainEventBalloonChangePtr)event;
| ^
../../src/conf/domain_event.c:1896:35: error: cast increases required alignment of target type [-Werror=cast-align]
1896 | blockThresholdEvent = (virDomainEventBlockThresholdPtr)event;
| ^
../../src/conf/domain_event.c: In function 'virDomainQemuMonitorEventDispatchFunc':
../../src/conf/domain_event.c:1974:24: error: cast increases required alignment of target type [-Werror=cast-align]
1974 | qemuMonitorEvent = (virDomainQemuMonitorEventPtr)event;
| ^
../../src/conf/domain_event.c: In function 'virDomainQemuMonitorEventFilter':
../../src/conf/domain_event.c:2179:20: error: cast increases required alignment of target type [-Werror=cast-align]
2179 | monitorEvent = (virDomainQemuMonitorEventPtr) event;
| ^
Forcing 8-byte alignment on virObjectEventPtr removes the
alignment increase during casts to subclasses.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is convenience macro, use it more. This commit was generated
using the following spatch:
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
...
- old = ctxt->node;
... when != old
- ctxt->node = old;
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old = ctxt->node;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
... when != old
- ctxt->node = old;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_new0 to allocate and remove NULL checks from callers
and the lock will release properly
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remember the preferred placement of <auth> and <encryption> for a disk
source across libvirtd restarts.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modern way to store <auth> and <encryption> of a <disk> is under
<source>. This was added to mirror how <backingStore> handles these and
in fact they are relevant to the source rather than to any other part of
the disk. Historically we allowed them to be directly under <disk> and
we need to keep compatibility.
This wasn't a problem until introduction of -blockdev in qemu using of
<auth> or <encryption> plainly wouldn't work with backing chains.
Now that it works in backing chains and can be moved back and forth
using snapshots/block-commit we need to ensure that the original
placement is properly kept even if the source changes.
To achieve the above semantics we need to store the preferred placement
with the disk definition rather than the storage source definitions and
also ensure that the modern way is chosen when the VM started with
<source/encryption> only in the backing store.
https://bugzilla.redhat.com/show_bug.cgi?id=1822878
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In a few places we use 0 and false, or 1 and true interchangeably
even though the variable or return type in question is boolean.
Fix those places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of the following pattern:
type ret;
...
ret = func();
return ret;
we can use:
return func()
directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This patch adds the implementation of the IBS pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_IBS capability added
in the previous patch.
IBS can have the following values: "broken", "workaround",
"fixed-ibs", "fixed-ccd" and "fixed-na".
This is the XML format for the cap:
<features>
<ibs value='fixed-ibs'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the SBBC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC capability added
in the previous patch.
Like the previously added CFPC feature, SBBC can have the values
"broken", "workaround" or "fixed". Extra code is required to handle
it since it's not a regular tristate capability.
This is the XML format for the cap:
<features>
<sbbc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the CFPC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC capability added
in the previous patch.
CPFC can have the values "broken", "workaround" or "fixed". Extra
code is required to handle it since it's not a regular tristate
capability.
This is the XML format for the cap:
<features>
<cfpc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit fix a wrong variable initialization. There is a variable
called `new_lease` which is being initialized with the content of
parameter `lease`. To avoid memory leak, the proper way is initialize
with NULL first. This wrong statement was added by commit 97a0aa24.
There are some other improvements also.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a backup job fails midway it's hard to figure out what happened as
it's running asynchronous. Use the VIR_DOMAIN_JOB_ERRMSG job statistics
field to pass through the error from the first failed backup-blockjob
so that both the consumer of the virDomainGetJobStats and the
corresponding event can see the error.
event 'job-completed' for domain backup-test:
operation: 9
time_elapsed: 46
disk_total: 104857600
disk_processed: 10158080
disk_remaining: 94699520
success: 0
errmsg: No space left on device
virsh domjobinfo backup-test --completed --anystats
Job type: Failed
Operation: Backup
Time elapsed: 46 ms
File processed: 9.688 MiB
File remaining: 90.312 MiB
File total: 100.000 MiB
Error message: No space left on device
https://bugzilla.redhat.com/show_bug.cgi?id=1812827
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If an user is trying to configure a dhcp neetwork settings, it is not
possible to change the leasetime of a range or a host entry. This is
available using dnsmasq extra options, but they are associated with
dhcp-range or dhcp-hosts fields. This patch implements a leasetime for
range and hosts tags. They can be defined under that settings:
<dhcp>
<range ...>
<lease/>
</range>
<host ...>
<lease/>
</host>
</dhcp>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=913446
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainDefParseXML function has grown so large it broke the build:
../../src/conf/domain_conf.c:20362:1: error: stack frame size of 4168 bytes
in function 'virDomainDefParseXML' [-Werror,-Wframe-larger-than=]
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'passthrough' is Xen-Specific guest configuration option new to Xen 4.13
that enables IOMMU mappings for a guest and hence whether it supports PCI
passthrough. The default is disabled. See the xl.cfg(5) man page and
xen.git commit babde47a3fe for more details.
The default state of disabled prevents hotlugging PCI devices. However,
if the guest configuration contains a PCI passthrough device at time of
creation, libxl will automatically enable 'passthrough' and subsequent
hotplugging of PCI devices will also be possible. It is not possible to
unconditionally enable 'passthrough' since it would introduce a migration
incompatibility due to guest ABI change. Instead, introduce another Xen
hypervisor feature that can be used to enable guest PCI passthrough
<features>
<xen>
<passthrough state='on'/>
</xen>
</features>
To allow finer control over how IOMMU maps to guest P2M table, the
passthrough element also supports a 'mode' attribute with values
restricted to snyc_pt and share_pt, similar to xl.cfg(5) 'passthrough'
setting .
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
e820_host is a Xen-specific option, only available for PV domains, that
provides the domain a virtual e820 memory map based on the host one. It
is enabled with a new Xen hypervisor feature, e.g.
<features>
<xen>
<e820_host state='on'/>
</xen>
</features>
e820_host is required when using PCI passthrough and is generally
considered safe for any PV kernel. e820_host is silently ignored if set
in HVM domain configuration. See xl.cfg(5) man page in the Xen
documentation for more details.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
