Commit Graph

18 Commits

Author SHA1 Message Date
Peter Krempa
edfd78d7f6 qemu: command: Always assume QEMU_CAPS_OVERCOMMIT
Starting with qemu-3.1 we always have the '-overcommit' argument and use
it instead of '-realtime'. Remove the capability check and fix all
fake-caps tests.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-04-04 12:26:59 +02:00
Peter Krempa
47b6829edc qemu: Always assume QEMU_CAPS_CHARDEV_FD_PASS_COMMANDLINE
All qemu versions now support FD passing either directly or via FDset.
Assume that we always have this capability so that we can simplify
chardev handling in many cases.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-04-04 12:26:59 +02:00
Michal Privoznik
af23241cfe qemu_command: Generate memory only after controllers
Currently, memory device (def->mems) part of cmd line is
generated before any controller. In majority of cases it doesn't
matter because neither of memory devices live on a bus that's
created by an exposed controller (e.g. there's no DIMM
controller, at least not exposed). Except for virtio-mem and
virtio-pmem, which do have a PCI address. And if it so happens
that the device goes onto non-default bus (pci.0) starting such
guest fails, because the controller that creates the desired bus
wasn't processed yet. QEMU processes arguments in order.

For instance, if virtio-mem has address with bus='0x01' QEMU
refuses to start with the following message:

  Bus 'pci.1' not found

Similarly for virtio-pmem. I've successfully tested migration and
changing the order does not affect migration stream.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2047271
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2022-02-02 14:22:47 +01:00
Peter Krempa
e3a2117488 tests: qemuxml2argvdata: Purge versioned i440fx machine types from fake-caps tests
Use the 'pc' alias for them as it's equivalent.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-01-07 09:25:14 +01:00
Michal Privoznik
d20ebdda28 qemu: Switch to -accel
We currently use -machine accel=XXX which is just a syntax sugar
for -accel XXX. The former doesn't allow specifying arguments for
accelerator, because all arguments passed to -machine are
treated as arguments of machine itself.

The -accel argument was introduced in QEMU commit
v2.9.0-rc0~70^2~19 and since our minimum required version is
newer (2.11.0) we can safely assume its existence and use it
without any capability.

Resolves: https://gitlab.com/libvirt/libvirt/-/issues/233
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-11-22 13:06:54 +01:00
Peter Krempa
0ae3e1313f qemu: Always assume presence of QEMU_CAPS_OBJECT_SECRET
The secret object is supported since qemu-2.6 and can't be compiled out.
Assume the presence to simplify the code.

This enables the use of the secret key for most tests not using real
caps.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-22 14:53:55 +02:00
Peter Krempa
e2aa0c3b5a qemu: command: Always assume 'QEMU_CAPS_BOOT_STRICT'
Added by c8a6ae8bb9 in qemu-v1.5.0 and can't be compiled out. Assume
that it's present and fix all fake-caps tests.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-21 12:26:06 +02:00
Peter Krempa
c7a85b5b77 qemu: command: Always assume support for '-msg timestamp=on'
All supported QEMU versions have this option so there's no need for us
to base it on the capability.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-18 10:00:22 +02:00
Peter Krempa
d5a6145900 qemu: command: Always assume support for '-name guest=' and '-name debug-threads=on'
All QEMU versions we support have these and it's very unlikely that they
will be removed. Remove the capability checks.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-18 09:59:31 +02:00
Peter Krempa
0046e0b1c2 qemuxml2argvtest: Use internal wrapping of command line arguments
virCommandToString has the possibility to return an already wrapped
string with better format than what we get from the test wrapper script.

The main advantage is that arguments for an option are always on the
same line which makes it more easy to see what changed in a diff and
prevents re-wrapping of the line if a wrapping point moves over the
threshold.

Additionally the used output is the same we have in the VM log file when
a VM is starting.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-04-12 15:55:10 +02:00
Daniel P. Berrangé
8851d87556 qemu: use on|off instead of yes|no for -object boolean properties
QEMU has long accepted many different values for boolean properties, but
set accepted has been different depending on which QEMU parser you hit.

The on|off values were supported by all QEMU parsers. The yes|no, y|n,
true|false values were only partially supported:

  https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg01012.html

Thus we should standardize on on|off everywhere since that is most
widely supported in QEMU.

Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-16 14:03:13 +00:00
Daniel P. Berrangé
43c9c0859f qemu: use long on|off syntax for -chardev boolean option values
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.

The long format has been supported with -chardev since at least 1.5.3,
so we don't need to check for it.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-16 12:38:20 +00:00
Michal Privoznik
eda5cc7a62 qemuBuildMemoryBackendProps: Move @prealloc setting to backend agnostic part
All three memory backends (-file, -ram and -memfd) have .prealloc
attribute. Since we are setting it only for -file, the
corresponding code lives only under if() that handles that
specific backend. But in near future we will want to set the
attribute for other backends too. Therefore, move the
corresponding code outside of the if().

This causes some .argv files to be changed, but the only change
happening there is move of the attribute (best viewed with:
'git show --color-words=.').

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-10-01 12:01:31 +02:00
Michal Privoznik
34a59fb570 qemu: Drop two layers of nesting of memoryBackingDir
Initially introduced in v3.10.0-rc1~172.

When generating a path for memory-backend-file or -mem-path, qemu
driver will use the following pattern:

  $memoryBackingDir/libvirt/qemu/$id-$shortName

where $memoryBackingDir defaults to /var/lib/libvirt/qemu/ram but
can be overridden in qemu.conf. Anyway, the "/libvirt/qemu/" part
looks redundant, because it's already contained in the default,
or creates unnecessary nesting if overridden in qemu.conf.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2020-04-07 15:26:17 +02:00
Michal Privoznik
a08c4b3741 qemu: Always assume QEMU_CAPS_REALTIME_MLOCK
The '-realtime mlock' cmd line argument was introduced in QEMU
commit v1.5.0-rc0~190 which matches minimal QEMU version we
require. Therefore, the capability will always be present.

Apparently, nearly none of our xml2argv test cases had the
capability hence slightly bigger change under qemuxml2argvdata/.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-12 13:39:42 +02:00
Erik Skultety
75a9169881 qemu: command: Override HOME variable for system QEMU
By default, qemu user's home dir points to '/' which shouldn't be used
at all. We therefore pass the HOME variable from the current variable
iff not running as SUID, which means that for systemd we never set it.
This patch makes sure, that for system QEMU this is always set to
libDir/<driver>, session mode is left untouched.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-15 16:41:26 +01:00
Erik Skultety
7e73137495 qemu: command: Enforce setting XDG variables for system QEMU
For session mode, only XDG_CACHE_HOME is set, because we want to remain
integrating with services in user session, but for system mode, this
would have become reading/writing to '/' which carries the obvious issue
with permissions (also, '/' is the wrong location in 99.9% cases anyway).

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-15 16:41:26 +01:00
Pavel Hrdina
7e0ac26867 tests: rename hugepages-pages7 into pages-dimm-discard
Remove unnecessary XML elements as well.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2018-08-10 17:06:48 +02:00