Reported by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Some of the tests for virTimeLocalOffsetFromUTC set an imaginary
timezone that attempts to force dyalight savings time active all the
time by setting a start date of 0/00:00:00 and end date of
366/23:59:59. Since the day is 0-based, 366 really means "day 367"
which will never occur - this was an attempt to eliminate problems
with DST not being active in some cases right around midnight on
January 1. Even though it didn't completely solve the problem, it
didn't seem to cause harm so it was left in the test timezones.
Although Linux glibc doesn't mind having a DST end date of 366,
FreeBSD refuses to use such timezones, so the tests fail. This patch
changes the 366 to 365.
This may or may not cause failure of the remaining DST tests around
midnight Jan 1. If so, we will need to disable those tests at year's
end too.
On a 32-bit platform:
virstringtest.c: In function 'mymain':
virstringtest.c:673: warning: this decimal constant is unsigned only in ISO C90
I already had a comment in the file about the 64-bit counterpart;
the easiest fix was to make both sites use the standardized macro
that is guaranteed to work.
* tests/virstringtest.c (mymain): Minimum signed integers are a pain.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently we don't support mixed (external + internal) snapshots. The
code detecting the snapshot type didn't make sure that the memory image
was consistent with the snapshot type leading into strange error
message:
$ virsh snapshot-create-as --domain VM --diskspec vda,snapshot=internal --memspec snapshot=external,file=/tmp/blah
error: internal error: unexpected code path
Fix the mixed detection code to detect this kind of mistake:
$ virsh snapshot-create-as --domain VM --diskspec vda,snapshot=internal --memspec snapshot=external,file=/tmp/blah
error: unsupported configuration: mixing internal and external targets for a snapshot is not yet supported
A internal snapshot of a active VM with the memory snapshot disabled
explicitly would actually still take the memory snapshot. Reject it
explicitly.
Before:
$ virsh snapshot-create-as --domain VM --diskspec vda,snapshot=internal --memspec snapshot=no
Domain snapshot 1401353155 created
After:
$ virsh snapshot-create-as --domain VM --diskspec vda,snapshot=internal --memspec snapshot=no
error: Operation not supported: internal snapshot of a running VM must include the memory state
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1083345
For guests backed by gluster volumes (or other network storage) we don't
fill the backing chain (see qemuDomainDetermineDiskChain). This leaves
the "relPath" field of the top image NULL. This causes a crash in
virStorageFileChainLookup() when looking up a backing element for such a
disk.
Since I'm working on adding support for network storage and one of the
steps will make the "relPath" field optional let's use STREQ_NULLABLE
instead of STREQ in virStorageFileChainLookup() to avoid the problem.
The original version of virTimeLocalOffsetFromUTC() would fail for
certain times of the day if daylight savings time was active. This
could most easily be seen by uncommenting the TEST_LOCALOFFSET() cases
that include a DST setting.
After a lot of experimenting, I found that the way to solve it in
almost all test cases is to set tm_isdst = -1 in the struct tm prior
to calling mktime(). Once this is done, the correct offset is returned
for all test cases at all times except the two hours just after
00:00:00 Jan 1 UTC - during that time, any timezone that is *behind*
UTC, and that is supposed to always be in DST will not have DST
accounted for in its offset.
I believe that the code of virTimeLocalOffsetFromUTC() actually is
correct for all cases, but the problem still encountered is due to our
inability to come up with a TZ string that properly forces DST to
*always* be active. Since a modfication of the (currently fixed)
expected result data to account for this would necessarily use the
same functions that we're trying to test, I've instead just made the
test program conditionally bypass the problematic cases if the current
date is either December 31 or January 1. This way we get maximum
testing during 363 days of the year, but don't get false failures on
Dec 31 and Jan 1.
Commit 292d3f2d fixed the build with libselinux 2.3, but missed
some suggestions by eblake
https://www.redhat.com/archives/libvir-list/2014-May/msg00977.html
This patch changes the macro introduced in 292d3f2d to either be
empty in the case of newer libselinux, or contain 'const' in the
case of older libselinux. The macro is then used directly in
tests/securityselinuxhelper.c.
Several function signatures changed in libselinux 2.3, now taking
a 'const char *' instead of 'security_context_t'. The latter is
defined in selinux/selinux.h as
typedef char *security_context_t;
Signed-off-by: Eric Blake <eblake@redhat.com>
Even successful start of a VM from a managed save image would spam the
logs with the following message:
Unable to restore from managed state [path]. Maybe the file is
corrupted?
Re-arrange the logic to output the warning only when the image is
corrupted.
The flaw was introduced in commit cfc28c66.
Use virStorageFileGetMetadataFromFD instead in
virStorageBackendProbeTarget as it now returns all required data and the
storage file is already open in a filedescriptor.
Also fix improper error code being returned when virFileReadHeaderFD
would fail as virStorageBackendUpdateVolTargetInfoFD would set the
return code to 0.
Add argument to return backing file format of a file probed by
virStorageFileGetMetadataFromFD so that it can be used in place of
virStorageFileGetMetadataFromBuf.
qemu 2.0 added the ability to commit the active layer, but slightly
differently than what libvirt had been anticipating in its
implementation of the virDomainBlockCommit call. As a result, if
you attempt to do a 'virsh blockcommit $dom vda', qemu gets into a
state where it is waiting on libvirt to end the job, while libvirt
is waiting on qemu to end the job, and the guest is effectively
hung with regards to further commands for that block device.
I have patches coming down the pipeline that will add full support
for blockcommit of the active layer when coupled with qemu 2.0 or
later; but they depend on Peter's improvements to block job handling
and form enough of a new feature that they are not ready for
inclusion in the 1.2.5 release. So for now, just reject the
attempt, rather than letting the user get stuck. This is no worse
than the behavior of qemu 1.7 rejecting the job.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Reject active
commit.
Signed-off-by: Eric Blake <eblake@redhat.com>
QEMU ppce500 board uses the legacy -serial option.
Other PPC boards don't give any way to explicitly wire in a -chardev
except pseries which uses -device spapr-vty with -chardev.
Add test case for -serial option for ppce500
Signed-off-by: Olivia Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1088787
Clean up unix socket files for chardevs using mode='bind',
like we clean up the monitor socket.
They are created by QEMU on startup and not really useful
after shutting it down.
For a clock element as above, libvirt simply converts current system
time with localtime_r(), then starts qemu with a time string that
doesn't contain any timezone information. So, from qemu's point of
view, the -rtc string it gets for:
<clock offset='variable' basis='utc' adjustment='10800'/>
is identical to the -rtc string it gets for:
<clock offset='variable' basis='localtime' adjustment='0'/>
(assuming the host is in a timezone that is 10800 seconds ahead of
UTC, as is the case on the machine where this message is being
written).
Since the commandlines are identical, qemu will behave identically
after this point in either case.
There are two problems in the case of basis='localtime' though:
Problem 1) If the guest modifies its RTC, for example to add 20
seconds, the RTC_CHANGE event from qemu will then contain offset:20 in
both cases. But libvirt will have saved the original adjustment into
adjustment0, and will add that value onto the offset in the
event. This means that in the case of basis=;utc', it will properly
emit an event with offset:10820, but in the case of basis='localtime'
the event will contain offset:20, which is *not* the new offset of the
RTC from UTC (as the event it documented to provide).
Problem 2) If the guest is migrated to another host that is in a
different timezone, or if it is migrated or saved/restored after the
DST status has changed from what it was when the guest was originally
started, the newly restarted guest will have a different RTC (since it
will be based on the new localtime, which could have shifted by
several hours).
The solution to both of these problems is simple - rather than
maintaining the original adjustment value along with
"basis='localtime'" in the domain status, when the domain is started
we convert the adjustment offset to one relative to UTC, and set the
status to "basis='utc'". Thus, whatever the RTC offset was from UTC
when it was initially started, that offset will be maintained when
migrating across timezones and DST settings, and the RTC_CHANGE events
will automatically contain the proper offset (which should by
definition always be relative to UTC).
This fixes a problem that was implied but not openly stated in:
https://bugzilla.redhat.com/show_bug.cgi?id=964177
commit e31b5cf393 attempted to fix libvirt's
VIR_DOMAIN_EVENT_ID_RTC_CHANGE, which is documentated to always
provide the new offset of the domain's real time clock from UTC. The
problem was that, in the case that qemu is provided with an "-rtc
base=x" where x is an absolute time (rather than "utc" or
"localtime"), the offset sent by qemu's RTC_CHANGE event is *not* the
new offset from UTC, but rather is the sum of all changes to the
domain's RTC since it was started with base=x.
So, despite what was said in commit e31b5cf393, if we assume that
the original value stored in "adjustment" was the offset from UTC at
the time the domain was started, we can always determine the current
offset from UTC by simply adding the most recent (i.e. current) offset
from qemu to that original adjustment.
This patch accomplishes that by storing the initial adjustment in the
domain's status as "adjustment0". Each time a new RTC_CHANGE event is
received from qemu, we simply add adjustment0 to the value sent by
qemu, store that as the new adjustment, and forward that value on to
any event handler.
This patch (*not* e31b5cf393, which should be reverted prior to
applying this patch) fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=964177
(for the case where basis='utc'. It does not fix basis='localtime')
This reverts commit e31b5cf393.
This commit attempted to work around a bug in the offset value
reported by qemu's RTC_CHANGE event in the case that a variable base
date was given on the qemu commandline. The patch mixed up the math
involved in arriving at the corrected offset to report, and in the
process added an unnecessary private attribute to the clock
element. Since that element is private/internal and not used by anyone
else, it makes sense to simplify things by removing it.
Since there isn't a single libc API to get this value, this patch
supplies one which gets the value by grabbing current time, then
converting that into a struct tm with gmtime_r(), then back to a
time_t using mktime.
The returned value is the difference between UTC and localtime in
seconds. If localtime is ahead of UTC (east) the offset will be a
positive number, and if localtime is behind UTC (west) the offset will
be negative.
This function should be POSIX-compliant, and is threadsafe, but not
async signal safe. If it was ever necessary to know this value in a
child process, we could cache it with a one-time init function when
libvirtd starts, then just supply the cached value, but that
complexity isn't needed for current usage; that would also have the
problem that it might not be accurate after a local daylight savings
boundary.
(If it weren't for DST, we could simply replace this entire function
with "-timezone"; timezone contains the offset of the current timezone
(negated from what we want) but doesn't account for DST. And in spite
of being guaranteed by POSIX, it isn't available on older versions of
mingw.)
Signed-off-by: Eric Blake <eblake@redhat.com>
Add storage driver based functions to access headers of storage files
for metadata extraction. Along with this patch a local filesystem and
gluster via libgfapi implementation is provided. The gluster
implementation is based on code of the saferead_lim function.
To allow using the storage driver APIs to access files on various
storage sources in a universal fashion possibly on storage such as nfs
with root squash we'll need to store the desired uid/gid in the
metadata.
Add new initialisation API that will store the desired uid/gid and a
wrapper for the current use. Additionally add docs for the two APIs.
Currently the protocol type with index 0 was NBD which made it hard to
distinguish whether the protocol type was actually assigned. Add a new
protocol type with index 0 to distinguish it explicitly.
Print the debug statements of individual file access functions from the
main API functions instead of the individual backend functions.
Also enhance initialization debug messages on a per-backend basis.
The gluster volume name was previously stored as part of the source path
string. This is unfortunate when we want to do operations on the path as
the volume is used separately.
Parse and store the volume name separately for gluster storage volumes
and use the newly stored variable appropriately.
Refactor the function to accept a virStorageSourcePtr instead of just
the path, add a check to run it only on local storage and fix callers
(possibly by using a newly introduced wrapper that wraps a path in the
virStorageSource struct for legacy code)
Refresh the disk backing chains when reconnecting to a qemu process
after daemon restart. There are a few internal fields that don't get
refreshed from the XML. Until we are able to do that, let's reload all
the metadata by the backing chain crawler.
This is similar to the previous commit in that we need to explicitly
send migrate_cancel when libvirt detects an error other than those
reported by query-migrate. However, the possibility to hit such error is
pretty small.
When QEMU reports failed or cancelled migration, we don't need to send
it migrate_cancel QMP command. But in all other error paths, such as if
we detect broken connection to a destination daemon or something else
happens inside libvirt, we need to explicitly send migrate_cancel
command instead of relying on the migration to be implicitly cancelled
when destination QEMU is killed.
Because we were not doing so, one could end up with a paused domain
after failed migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1098833
The current error message is
error: use virDomainMigrateToURI3 for peer-to-peer migration
which is correct but a bit misleading because the client did not specify
VIR_MIGRATE_PEER2PEER flag. This patch changes the error message to
error: cannot perform tunnelled migration without using peer2peer
flag
which is consistent with the error reported by older migration APIs.
Reported by Rich Jones in
https://bugzilla.redhat.com/show_bug.cgi?id=1095924
Commit 546154e parses the type attribute from a <backingStore>
element, but forgot that the earlier commit 9673418 added a
placeholder element in the same 1.2.3 release; as a result,
the C code was mistakenly allowing "none" as a type.
Similarly, the same commit allows "none" as the <format>
sub-element type, even though that has been a placeholder
since the 0.10.2 release with commit f772b3d.
* src/conf/domain_conf.c (virDomainDiskBackingStoreParse): Require
non-zero types.
Signed-off-by: Eric Blake <eblake@redhat.com>
If virDomainMemoryStats is called too soon after domain startup,
QEMU returns:
"error":{"class":"GenericError","desc":"guest hasn't updated any stats yet"}
when we try to query balloon stats.
Check for this reply and log it as OPERATION_INVALID instead of
INTERNAL_ERROR. This means the daemon only logs it at the debug level,
without polluting system logs.
Reported by Laszlo Pal:
https://www.redhat.com/archives/libvirt-users/2014-May/msg00023.html
In the f56c773bf we've made the substitution but forgot to fix one
comment which is still referring to the old name. This may be
potentially misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In a number of places in the bhyve driver, virObjectUnlock()
is called with an arg without check if the arg is non-NULL, which
could result in passing NULL value and a warning like:
virObjectUnlock:340 : Object 0x0 ((unknown)) is not a virObjectLockable instance
* src/bhyve/bhyve_driver.c (bhyveDomainGetInfo)
(bhyveDomainGetState, bhyveDomainGetAutostart)
(bhyveDomainSetAutostart, bhyveDomainIsActive)
(bhyveDomainIsPersistent, bhyveDomainGetXMLDesc)
(bhyveDomainUndefine, bhyveDomainLookupByUUID)
(bhyveDomainLookupByName, bhyveDomainLookupByID)
(bhyveDomainCreateWithFlags, bhyveDomainOpenConsole):
Check if arg is not NULL before calling virObjectUnlock on it.
If you trigger bug 1033369, we get the error message:
error from service: Invalid argument
Which is a bit too generic to pinpoint what is actually failing. This
changes it to:
error from service: CreateMachine: Invalid argument
Acked-by: Eric Blake <eblake@redhat.com>
This is the only callsite.
We drop use of localerror.name here, because it's not actually useful
to us: rather than the parameter name which received an invalid value
(which was assumed), it's actually the the dbus errno equivalent.
Just use the error string.
Acked-by: Eric Blake <eblake@redhat.com>
I got a build failure when cross-compiling to mingw with the
mingw64-dbus package installed:
CC virmockdbus_la-virmockdbus.lo
../../tests/virmockdbus.c:29:6: error: 'dbus_connection_set_change_sigpipe' redeclared without dllimport attribute: previous dllimport ignored [-Werror=attributes]
VIR_MOCK_STUB_VOID_ARGS(dbus_connection_set_change_sigpipe,
^
../../tests/virmockdbus.c:33:18: error: 'dbus_bus_get' redeclared without dllimport attribute: previous dllimport ignored [-Werror=attributes]
VIR_MOCK_STUB_RET_ARGS(dbus_bus_get,
...
Well duh - mingw lacks dlopen and friends, even if it can support
dbus. A similar failure occured in virsystemdtest.c; but in that
file, we know that systemd is a Linux-only concept.
* tests/virmockdbus.c: Cripple on mingw.
* tests/virsystemdtest.c: Cripple on non-Linux.
Signed-off-by: Eric Blake <eblake@redhat.com>
When doing an external checkpoint of a VM with no disk selected we'd
return failure but not set error code. This was a result of ret not
being set to 0 during walking of the disk array.
Rework early failure checking and set the error code to success before
iterating the array of disks so that we return success if no disks are
snapshotted.
Fixes the following symptom (or without --diskspec for diskless VMs)
$ virsh snapshot-create-as snapshot-test --memspec /tmp/asdf --diskspec hda,snapshot=no
error: An error occurred, but the cause is unknown
If neither disks nor memory are selected for snapshot we'd record
metadata in case of external snapshot and do a disk snapshot in case of
external disk snapshot. Forbid this as it doesn't make much sense.
For now, we set the migration URI via command line '--migrate_uri' or
construct the URI by looking up the dest host's hostname which could be
solved by DNS automatically.
But in cases the dest host have two or more NICs to reach, we may need to
send the migration data over a specific NIC which is different from the
automatically resolved one for some reason like performance, security, etc.
Thus we must explicitly specify the migrateuri in command line everytime,
but it is too troublesome if there are many such hosts (and don't forget
virt-manager).
This patch adds a configuration file option on dest host to save the
default value set which can be specified to a migration hostname or
one of this host's addresses used for transferring data, thus user doesn't
have to specify it in command line everytime.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Inspired by a simpler patch from "Wangrui (K) <moon.wangrui@huawei.com>".
A submitted patch pointed out that virNetlinkCommand() was doing an
improper typecast of the return value from nl_recv() (int to
unsigned), causing it to miss error returns, and that even after
remedying that problem, virNetlinkCommand() was calling VIR_FREE() on
the pointer returned from nl_recv() (*resp) even if nl_recv() had
returned an error, and that in this case the pointer was verifiably
invalid, as it was pointing to memory that had been allocated by
libnl, but then freed prior to returning the error.
While reviewing this patch, I noticed several other problems with this
seemingly simple function (at least one of them as serious as the
problem being reported/fixed by the aforementioned patch), and decided
they all deserved to be fixed. Here is the list:
1) The return value from nl_recv() must be assigned to an int (rather
than unsigned int) in order to detect failure.
2) When nl_recv() returns an error or 0, the contents of *resp is
invalid, and should be simply set to 0, *not* VIR_FREE()'d.
3) When nl_recv() returns 0, errno is not set, so the logged error
message should not reference errno (it *is* an error though).
4) The first error return from virNetlinkCommand returns -EINVAL,
incorrectly implying that the caller can expect the return value to
be of the "-errno" variety, which is not true in any other case.
5) The 2nd error return returns directly with garbage in *resp. While
the caller should never use *resp in this case, it's still good
practice to set it to NULL.
6) For the next 5 (!!) error conditions, *resp will contain garbage,
and virNetlinkCommand() will goto it's cleanup code which will
VIR_FREE(*resp), almost surely leading to a segfault.
In addition to fixing these 6 problems, this patch also makes the
following two changes to make the function conform more closely to the
style of other libvirt code:
1) Change the handling of return code from "named rc and defaulted to
0, but changed to -1 on error" to the more common "named ret and
defaulted to -1, but changed to 0 on success".
2) Rename the "error" label to "cleanup", since the code that follows
is executed in success cases as well as failure.
Commit d5c86278 was incomplete; other functions also triggered
compiler warnings about collisions in the use of 'sync'.
* src/qemu/qemu_driver.c (qemuDomainSetTime): Fix another client.
* tools/virsh-domain-monitor.c (cmdDomTime): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
