All supported QEMU versions now support query-qmp-schema. In the future
it will be possible to use the output of query-qmp-schema to also detect
commands reliably.
Since we are at the point where we have the least amount of .replies
files needing changing for a long time, move the 'query-qmp-schema' bits
before 'query-commands' to prepare for the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Modern code uses QMP schema to query for active commit support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Modern code uses QMP schema to query for supported event types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemu versions have 'query-qmp-schema' so we can remove the
check whether it exists and all logic conntected to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove the slot reservation for the vga card which doesn't make sense
with supported qemus any more for the q35 machine type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove the slot reservation for the vga card which doesn't make sense
with supported qemus any more for the i440fx machine type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemus now support using '-device' for adding a graphics
device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
These conveniently don't have any test fallout.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Until we clean up and remove all capabilities which no longer make sense
to have separately, we should use virQEMUCapsInitQMPBasicArch to set the
defaults as it's used by qemuxml2argvtest when testing with fake
capabilities.
This allows us to prevent testing dead code paths with the fake
capability tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move it under AARCH 64, since it's a platform specific feature, thus it
will be removed from all other platforms.
Since virQEMUCapsInitQMPBasicArch is used in qemuxml2argv test to
initiate qemuCaps for tests with fake capabilities, all the tests gain
GIC support now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_CAPS_MACHINE_PSERIES_RESIZE_HPT and
QEMU_CAPS_MACHINE_PSERIES_MAX_CPU_COMPAT are now always asserted on PPC
machine types, move them to virQEMUCapsInitQMPBasicArch.
It's now always set for AARCH64, move it into the function setting basic
caps for the emulator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It's now always set for AARCH64, move it into the function setting basic
caps for the emulator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that minimum supported qemu version is 2.11, we can remove the
conditions.
Note that the check enabling QEMU_CAPS_TCG was for < 2.10.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We no longer have to mask out IOMMU and NVDIMM support as we no longer
support the broken qemu versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The qemuCaps is left for the device commandline formatters for now as it
might come in handy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All machine types which have PCI support multibus since qemu 2.0
according to the logic we had, thus we can remove all the machine type
and version checks which are now dead code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
These strings are not constant really. They are allocated in
qemuDomainObjBeginJobInternal() and freed in
qemuDomainReset*Job(). Freeing a pointer to const looks weird.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Jumping back in the code is an anti-pattern that should be avoided if
possible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't require that the data is consistent on the destination if
aborting the migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rename the parameter so that it's more clear what state we are in and
fix all callees.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want to unify on one block job cancellation API. Use
qemuMonitorBlockJobCancel which has more features.
In case of job refresh, we are killing off any unknown jobs so we don't
care about their fate.
Another difference is that an possible error from the block job
cancellation might be reported, but we don't really care here ince
it's a very unlikely scenario and we also report a warning.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want to unify on one block job cancellation API. Use
qemuMonitorBlockJobCancel which has more features.
In case of backup jobs we can cancel the jobs forcefully since the code
is on a cleanup path when the job fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'block-job-cancel' has one very important semantic difference to
'job-cancel', docummented in qemu as:
Note that if you issue 'block-job-cancel' after 'drive-mirror' has indicated
(via the event BLOCK_JOB_READY) that the source and destination are
synchronized, then the event triggered by this command changes to
BLOCK_JOB_COMPLETED, to indicate that the mirroring has ended and the
destination now has a point-in-time copy tied to the time of the cancellation.
Since libvirt advertises the block copy job as having the synchronous
abort feature we must not use 'job-cancel' here.
Fixes: 4817b5ca1d
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In certain cases such as when aborting migration we don't really care
for completion of the blockjob. Add 'force' as parameter of
'block-job-cancel'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing and remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't try to setup disk migration and the NBD stuff if we end up
migrating nothing.
The destination side has luckily no setup for the non-NBD cases so
omitting the element fully is okay.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't even try to setup storage migration if there are no eligible
disks.
This also fixes migration from older libvirts which didn't format an
empty <nbd/> element in the migration cookie if there weren't any disks
to migrate.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Base the decision on the main API flags (VIR_MIGRATE_NON_SHARED_DISK,
QEMU_MONITOR_MIGRATE_NON_SHARED_INC) via a boolean 'storageMigration'
rather than juggling everything trhough 'migration_flags'.
After this patch 'migration_flags' is updated to contain the legacy
storage migration flags only when we'll be about to use it rather than
setting it and then resetting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'migrate_flags' can be updated in the only caller and since
qemuMigrationSrcNBDStorageCopy already takes @flags which contains
VIR_MIGRATE_NON_SHARED_INC (used to set
QEMU_MONITOR_MIGRATE_NON_SHARED_INC) we can completely remove the
parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case the 'nbdURI' schema is not known the code would report an error
but wouldn't return failure.
Fixes: 49186372db
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 518be41aaa refactored qemuMigrationCookieNBDXMLFormat to use
virXMLFormatElement which in comparison to the previous code doesn't
format the element if it's empty.
Unfortunately some crusty bits of our migration code use questionable
logic to assert use of the old-style storage migration parameters which
breaks if no disks are being migrated and the <nbd/> element is not
present.
While later patches will fix the code, re-instate formatting of empty
<nbd/> for increased compatibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When placing vCPUs into CGroups the qemuProcessSetupPid() is
called which then enters a for() loop (around its middle) where
it calls virDomainNumaGetNodeCpumask() for each guest NUMA node.
But the latter returns only a pointer not new reference/copy and
thus the caller must not free it. But the variable is decorated
with g_autoptr() which leads to a double free.
Fixes: 2d37d8dbc9
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Copy the socket path in qemuExtDevicesStart, because
for libvirt-managed virtiofsd daemons the path is filled there
in qemuVirtioFSStart.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow passing a socket of an externally launched virtiofsd
to the vhost-user-fs device.
<filesystem type='mount'>
<driver type='virtiofs' queue='1024'/>
<source socket='/tmp/sock/'/>
</filesystem>
https://bugzilla.redhat.com/show_bug.cgi?id=1855789
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In certain rare occasions qemu can transition a block job which was
already 'ready' into 'standby' and then back. If this happens in the
following order libvirt will get confused about the actual job state:
1) the block copy job is 'ready' (job->state == QEMU_BLOCKJOB_STATE_READY)
2) user calls qemuDomainBlockJobAbort with VIR_DOMAIN_BLOCK_JOB_ABORT_PIVOT
flag but without VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC
3) the block job is switched to synchronous event handling
4) the block job blips to 'standby' and back to 'ready', the event is
not processed since the blockjob is in sync mode for now
5) qemuDomainBlockJobPivot is called:
5.1) 'job-complete' QMP command is issued
5.2) job->state is set to QEMU_BLOCKJOB_STATE_PIVOTING
6) code for synchronous-wait for the job completion in qemuDomainBlockJobAbort
is invoked
7) the waiting loop calls qemuBlockJobUpdate:
7.1) job->newstate is QEMU_BLOCKJOB_STATE_READY due to 4)
7.2) qemuBlockJobEventProcess is called
7.3) the handler for QEMU_BLOCKJOB_STATE_READY overwrites
job->state from QEMU_BLOCKJOB_STATE_PIVOTING to QEMU_BLOCKJOB_STATE_READY
8) qemuDomainBlockJobAbort is looking for a finished job, so waits again
9) qemu finishes the blockjob and transitions it into 'concluded' state
10) qemuBlockJobUpdate is triggered again, this time finalizing the job.
10.1) job->newstate is = QEMU_BLOCKJOB_STATE_CONCLUDED
job->state is = QEMU_BLOCKJOB_STATE_READY
10.2) qemuBlockJobEventProcessConcluded is called, the function
checks whether there was an error with the blockjob. Since
there was no error job->newstate becomes
QEMU_BLOCKJOB_STATE_COMPLETED.
10.3) qemuBlockJobEventProcessConcludedTransition selects the action
for the appropriate block job type where we have:
case QEMU_BLOCKJOB_TYPE_COPY:
if (job->state == QEMU_BLOCKJOB_STATE_PIVOTING && success)
qemuBlockJobProcessEventConcludedCopyPivot(driver, vm, job, asyncJob);
else
qemuBlockJobProcessEventConcludedCopyAbort(driver, vm, job, asyncJob);
break;
Since job->state is QEMU_BLOCKJOB_STATE_READY,
qemuBlockJobProcessEventConcludedCopyAbort is called.
This patch forbids transitions to QEMU_BLOCKJOB_STATE_READY if the
previous job state isn't QEMU_BLOCKJOB_STATE_RUNNING or
QEMU_BLOCKJOB_STATE_NEW.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1951507
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function in question uses "tc" binary so virnetdevbandwidth feels
like better place for it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The g_path_is_absolute() considers more situations
than just a simply "path[0] == '/'".
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Changes to other places using switch statements were required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the appropriate type for the variable and refactor the XML parser to
parse it correctly using virXMLPropEnum.
Changes to other places using switch statements were required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a disk bus value represending no selected bus. This will help split
up the XML parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainBlockCopy needs just the source portion of the disk but uses
the disk parser for it. Since we have a specific function now, refactor
the code to avoid having to deal with the unused virDomainDiskDef.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
