AC_CHECK_PROG checks for program in given path. However, if it doesn't
exists, [variable] is set to [value-if-not-found]. We don't want this
to be the empty string in case of 'modprobe' and 'scrub' as we want to
fallback to runtime detection.
Currently, if scrub (used for wiping algorithms) is not present
at compile time, we don't support any other wiping algorithms than
zeroing, even if it was installed later. Switch to runtime detection
instead.
This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
or if libvirt should auto-generate the interfaceid use
following syntax:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
It is also possible to pass an optional profileid. To do that
use following syntax:
<interface type='bridge'>
<source bridge='ovsbr'/>
<mac address='00:55:1a:65:a2:8d'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
profileid='test-profile'/>
</virtualport>
</interface>
To create Open vSwitch bridge install Open vSwitch and
run the following command:
ovs-vsctl add-br ovsbr
Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.
Since we already require the kernel to be new enough to support
LO_FLAGS_AUTOCLEAR, we might as well also require glibc to be
new enough to support epoll_create1().
* configure.ac (with_lxc): We require glibc 2.9 for LXC.
Reported and tested by Philipp Hahn.
Although the netcf interface driver can in theory be used by
the stateless drivers, in practice none of them want to use
it because they have different ways of dealing with interfaces.
Furthermore, if you have mingw32-netcf installed, then the
libvirt mingw32 build will fail with
../../src/interface/netcf_driver.c:644:5: error: unknown field 'close_used_without_including_unistd_h' specified in initializer
* configure.ac: disable netcf if built without libvirtd
Using automake.git (will become 1.12 someday), I got this error:
configure.ac:90: error: automatic de-ANSI-fication support has been removed
/usr/local/share/aclocal-1.11a/protos.m4:13: AM_C_PROTOTYPES is expanded from...
configure.ac:90: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
In short, pre-C89 compilers are no longer a viable portability
target. Besides, our code base already requires C99, so worrying
about pre-C89 seems pointless.
* configure.ac (AM_C_PROTOTYPES): Drop, since newer automake no
longer provides it.
Using dtrace (and systemtap in general) is Linux-specific.
Running ./autobuild.sh shows that attempting a cross-build to
target mingw was mistakenly trying to build dtrace code, merely
because it was present on the compilation host.
* configure.ac (with_dtrace): Don't attempt to use dtrace when
doing a cross-build hosted on Linux but targetting elsewhere.
Reported by Daniel P. Berrange.
This ought to fix the build if you have net/if.h but do
not have struct ifreq
* configure.ac: Check for struct ifreq in net/if.h
* src/util/virnetdev.c: Conditionalize to avoid use of
struct ifreq if it does not exist
The logging APIs need to be able to generate formatted timestamps
using only async signal safe functions. This rules out using
gmtime/localtime/malloc/gettimeday(!) and much more.
Introduce a new internal API which is async signal safe.
virTimeMillisNowRaw replacement for gettimeofday. Uses clock_gettime
where available, otherwise falls back to the unsafe
gettimeofday
virTimeFieldsNowRaw replacements for gmtime(), convert a timestamp
virTimeFieldsThenRaw into a broken out set of fields. No localtime()
replacement is provided, because converting to
local time is not practical with only async signal
safe APIs.
virTimeStringNowRaw replacements for strftime() which print a timestamp
virTimeStringThenRaw into a string, using a pre-determined format, with
a fixed size buffer (VIR_TIME_STRING_BUFLEN)
For each of these there is also a version without the Raw postfix
which raises a full libvirt error. These versions are not async
signal safe
* src/Makefile.am, src/util/virtime.c, src/util/virtime.h: New files
* src/libvirt_private.syms: New APis
* configure.ac: Check for clock_gettime in -lrt
* tests/virtimetest.c, tests/Makefile.am: Test new APIs
virStorageBackendLogicalDeleteVol() could not remove the lv with error
"could not remove open logical volume" sometimes. Generally it's caused
by the volume is still active, even if lvremove tries to remove it with
option "--force".
This patch is to fix it by disbale the lv first using "lvchange -aln"
and "lvremove -f" afterwards if the direct "lvremove -f" failed.
This patch adds support for a systemd init service for libvirtd
and libvirt-guests. The libvirtd.service is *not* written to use
socket activation, since we want libvirtd to start on boot so it
can do guest auto-start.
The libvirt-guests.service is pretty lame, just exec'ing the
original init script for now. Ideally we would factor out the
functionality, into some shared tool.
Instead of
./configure --with-init-script=redhat
You can now do
./configure --with-init-script=systemd
Or better still:
./configure --with-init-script=systemd+redhat
We can also now support install of the upstart init script
* configure.ac: Add systemd, and systemd+redhat options to
--with-init-script option
* daemon/Makefile.am: Install systemd services
* daemon/libvirtd.sysconf: Add note about unused env variable
with systemd
* daemon/libvirtd.service.in: libvirtd systemd service unit
* libvirt.spec.in: Add scripts to installing systemd services
and migrating from legacy init scripts
* tools/Makefile.am: Install systemd services
* tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in
* tools/libvirt-guests.service.in: systemd service unit
Following the renaming of the bridge management APIs, we can now
split the source file into 3 corresponding pieces
* src/util/virnetdev.c: APIs for any type of network interface
* src/util/virnetdevbridge.c: APIs for bridge interfaces
* src/util/virnetdevtap.c: APIs for TAP interfaces
* src/util/virnetdev.c, src/util/virnetdev.h,
src/util/virnetdevbridge.c, src/util/virnetdevbridge.h,
src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied
from bridge.{c,h}
* src/util/bridge.c, src/util/bridge.h: Split into 3 pieces
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_command.c,
src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h,
src/uml/uml_driver.c: Update #include directives
Convert the virNetDevBridgeSetSTP and virNetDevBridgeSetSTPDelay
to use ioctls instead of spawning brctl.
Implement the virNetDevBridgeGetSTP and virNetDevBridgeGetSTPDelay
methods which were declared in the header but never existed
* src/util/bridge.c: Convert to use bridge ioctls instead of brctl
While building on FreeBSD (and after fixing a ptsname_r link error),
I got this failure:
./.libs/libvirt_util.a(libvirt_util_la-threads.o)(.text+0x240): In function `virThreadCreate':
util/threads-pthread.c:185: undefined reference to `pthread_create'
It turns out that gnulib used only pthread_join for LIB_PTHREAD,
but on FreeBSD, libc provides that (as a stub function); whereas
the more complex pthread_create really does require -pthread,
which gnulib tracked under [LT]LIBMULTITHREAD.
* configure.ac (LIBS): Check LIBMULTITHREAD alongside LIB_PTHREAD.
* src/Makefile.am (THREAD_LIBS): New variable.
(libvirt_util_la_LIBADD, libvirt_lxc_LDADD): Use it.
Commit 1726a73 hacked around MacOS' lack of fdatasync, since
gnulib did not have it at the time. But now that we use newer
gnulib, we can avoid the hack.
* bootstrap.conf (gnulib_modules): Add fdatasync.
* configure.ac (AC_CHECK_FUNCS_ONCE): Drop our own check.
Inexplicably the sanlock code all got placed under the GPLv2-only,
so libvirt's use of sanlock introduces a license incompatibility.
The sanlock developers have now rearranged the code such that there
is a 'sanlock_client.so' which is LGPLv2+ while their daemon remains
GPLv2-only. To use the new client library we need to call the new
sanlock_init and sanlock_align APIs instead of sanlock_direct_init
and sanlock_direct_align. These APIs calls are now routed via the
sanlock daemon, instead of doing direct I/O calls to disk.
For all this we require sanlock >= 1.8
* configure.ac: Check for sanlock_client.so instead of sanlock.so
and fix various comments
* libvirt.spec.in: Mandate sanlock >= 1.8
* src/Makefile.am: Link to -lsanlock_client
* src/locking/lock_driver_sanlock.c: Use sanlock_init and
sanlock_align
Mingw lacks fsync, but gnulib provides that. Meanwhile, gnulib does
not (yet) provide fdatasync, so this is a quick hack to fake that
function on MacOS X; we can revert this configure change once gnulib
gives us a real module.
We have been implicitly relying on gnulib's largefile module being
pulled in by other modules, but it's better to make that explicit.
* bootstrap.conf (gnulib_modules): Add fsync. Make largefile use
explicit.
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for fdatasync, and
fake it with fsync when not present.
When libvirt calls virInitialize it creates a thread local
for the virErrorPtr storage, and registers a callback to
cleanup memory when a thread exits. When libvirt is dlclose()d
or otherwise made non-resident, the callback function is
removed from memory, but the thread local may still exist
and if a thread later exists, it will invoke the callback
and SEGV. There may also be other thread locals with callbacks
pointing to libvirt code, so it is in general never safe to
unload libvirt.so from memory once initialized.
To allow dlclose() to succeed, but keep libvirt.so resident
in memory, link with '-z nodelete'. This issue was first
found with the libvirt CIM provider, but can potentially
hit many of the dynamic language bindings which all ultimately
involve dlopen() in some way, either on libvirt.so itself,
or on the glue code for the binding which in turns links
to libvirt
* configure.ac, src/Makefile.am: Ensure libvirt.so is linked
with -z nodelete
* cfg.mk, .gitignore, tests/Makefile.am, tests/shunloadhelper.c,
tests/shunloadtest.c: A test case to unload libvirt while
a thread is still running.
Detection based on gnutls_session doesn't work because GnuTLS 2.x.y
comes with a compat.h that defines gnutls_session to gnutls_session_t.
Instead detect this based on LIBGNUTLS_VERSION_MAJOR. Move this from
configure/config.h to gnutls_1_0_compat.h and make sure that all users
include gnutls_1_0_compat.h properly.
Also fix header guard in gnutls_1_0_compat.h.
* configure.ac docs/news.html.in libvirt.spec.in: updates for new
release
* po/*.po*: pulled translations from the transifex teams and regenerated
localizations
Right now, every re-run of configure re-evaluates whether a
static analysis tool is in use. But if you run configure under
coverity, make a tweak, and then do an incremental rebuild with
gcc but not coverity to test the tweak, then rerun a build under
coverity, then configure does not get rerun, and static analysis
ends up with lots of false positives.
This patch caches the static analysis result, and also makes it
easier to force static analysis even if the existing checks are
insufficient to detect newer versions of the static analyzer tools.
* configure.ac (lv_cv_static_analysis): New cache variable.
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location. But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.
Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first. Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.
Signed-off-by: Eric Blake <eblake@redhat.com>
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.
* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
Even though gnutls is a hard-req for libvirt, and gnutls depends
on libtasn1, that does not mean that you have to have the libtasn1
development files installed. Skip the test rather than failing
compilation in that case.
With newer gcc, the test consumed too much stack space. Move
things to static storage to fix that.
* configure.ac (AC_CHECK_HEADERS): Check for libtasn1.h.
(HAVE_LIBTASN1): New automake conditional.
* tests/Makefile.am (virnettlsconvirnettlscontexttest_SOURCES)
(virnettlscontexttest_LDADD): Allow compilation without libtasn1.
* tests/virnettlscontexttest.c: Skip test if headers not present.
(struct testTLSCertReq): Alter time members.
(testTLSGenerateCert): Reflect the change.
(mymain): Reduce stack usage.
Required for a coming patch where iohelper will operate on O_DIRECT
fds. There, the user-space memory must be aligned to file system
boundaries (at least 512, but using page-aligned works better, and
some file systems prefer 64k). Made tougher by the fact that
VIR_ALLOC won't work on void *, but posix_memalign won't work on
char * and isn't available everywhere.
This patch makes some simplifying assumptions - namely, output
to an O_DIRECT fd will only be attempted on an empty seekable
file (hence, no need to worry about preserving existing data
on a partial block, and ftruncate will work to undo the effects
of having to round up the size of the last block written), and
input from an O_DIRECT fd will only be attempted on a complete
seekable file with the only possible short read at EOF.
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for posix_memalign.
* src/util/iohelper.c (runIO): Use aligned memory, and handle
quirks of O_DIRECT on last write.
Currently, the xen statstest and reconnect tests are only compiled
if xend is running. Compile them unconditionally if xen headers
are present, but skip the tests at runtime if xend is not running.
This is in response to Eric's suggestion here
https://www.redhat.com/archives/libvir-list/2011-July/msg00367.html
This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work
As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.
* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la
Introduces a simple wrapper around the raw POSIX sockets APIs
and name resolution APIs. Allows for easy creation of client
and server sockets with correct usage of name resolution APIs
for protocol agnostic socket setup.
It can listen for UNIX and TCP stream sockets.
It can connect to UNIX, TCP streams directly, or indirectly
to UNIX sockets via an SSH tunnel or external command
* src/Makefile.am: Add to libvirt-net-rpc.la
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Generic
sockets APIs
* tests/Makefile.am: Add socket test
* tests/virnetsockettest.c: New test case
* tests/testutils.c: Avoid overriding LIBVIRT_DEBUG settings
* tests/ssh.c: Dumb helper program for SSH tunnelling tests
Since the addition of the lock manager framework in 6a943419c5
dlopen is always required, but the checks in configure wasn't changed
to reflect that. This didn't show up directly because the VirtualBox
driver linking dlopen in covered it. But disabling the VirtualBox
driver makes the build fail due to missing dlopen.
Change the dlopen check in configure to pick up dlopen when available.
Reported by Ruben Kerkhof.
Coverity 5.3.0 still outputs lots of COVERITY_* variables, but no
longer modifies COVERITY_BUILD_COMMAND in the environment. Pick
one that seems likely to stay around.
* configure.ac (STATIC_ANALYSIS): Detect newer Coverity.
In between fork and exec, a connection to sanlock is acquired
and the socket file descriptor is intionally leaked to the
child process. sanlock watches this FD for POLL_HANGUP to
detect when QEMU has exited. We don't want a rogus/compromised
QEMU from issuing sanlock RPC calls on the leaked FD though,
since that could be used to DOS other guests. By calling
sanlock_restrict() on the socket before exec() we can lock
it down.
* configure.ac: Check for sanlock_restrict API
* src/locking/domain_lock.c: Restrict lock acquired in
process startup phase
* src/locking/lock_driver.h: Add VIR_LOCK_MANAGER_ACQUIRE_RESTRICT
* src/locking/lock_driver_sanlock.c: Add call to sanlock_restrict
when requested by VIR_LOCK_MANAGER_ACQUIRE_RESTRICT flag
Sanlock is a project that implements a disk-paxos locking
algorithm. This is suitable for cluster deployments with
shared storage.
* src/Makefile.am: Add dlopen plugin for sanlock
* src/locking/lock_driver_sanlock.c: Sanlock driver
* configure.ac: Check for sanlock
* libvirt.spec.in: Add a libvirt-lock-sanlock RPM
Remove some special case code that took care of mapping hyper to the
correct C types.
As the list of procedures that is allowed to map hyper to long is fixed
put it in the generator instead annotations in the .x files. This
results in simpler .x file parsing code.
Use macros for hyper to long assignments that perform overflow checks
when long is smaller than hyper. Map hyper to long long by default.
Suggested by Eric Blake.
Now that RHEL 5.6 ships with gettext 0.17, we can get out of the
stone age and use the newer gettext capabilities and improved
macros for certain configure tests.
* configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.17.
(MKINSTALLDIRS): Delete hack that is no longer needed.
* bootstrap.conf (buildreq): Check for minimum gettext version.
Based on a report by Wen Congyang.
starting with kernel 2.6.38 macvtap supports a 'passthru' mode for
attaching virtual functions of a SRIOV capable network card directly to a VM.
This patch adds the capability to configure such a device.
Signed-off-by: Dirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
<sys/syslimits.h> is not standardized, so portable programs should
not need to rely on it. If there really is something that we need
where <sys/syslimits.h> provided the limit but <limits.h> did not,
then that would be a candidate for fixing in gnulib. But this patch
did not turn up any compilation failures on Linux.
* src/internal.h (includes): Drop unused header.
* daemon/libvirtd.h (includes): Likewise.
* configure.ac (AC_CHECK_HEADERS): Likewise.
Based on a report by Matthias Bolte.
There is no need to redefine _GNU_SOURCE in tests that occur after
gl_INIT, since that macro already AC_DEFINE'd it for us.
Signed-off-by: Eric Blake <eblake@redhat.com>
glibc 2.13.90 has obsoleted its rpc implementation in favour of
the one provided by the TI-RPC library:
> * The RPC implementation in libc is obsoleted. Old programs keep working
> but new programs cannot be linked with the routines in libc anymore.
> Programs in need of RPC functionality must be linked against TI-RPC.
> The TI-RPC implemtation is IPv6 enabled and there are other benefits.
>
> Visible changes of this change include (obviously) the inability to
> link
> programs using RPC functions without referencing the TI-RPC library,
> the
> removal of the RPC headers from the glibc headers, and the lack of
> symbols defined in <rpc/netdb.h> when <netdb.h> is installed.
> Implemented by Ulrich Drepper.
(from glibc NEWS)
Thus with recent glibc, we need to try linking with -ltirpc when looking
for the XDR functions. The daemon also needs to use XDR_CFLAGS to be able
to find the XDR headers stored in /usr/include/tirpc.
When using TI-RPC, there are some warnings about redundant declarations, but
the fix probably belongs in other modules:
/usr/include/tirpc/rpc/rpcent.h:68:13: warning: redundant redeclaration of
'setrpcent' [-Wredundant-decls]
/usr/include/rpc/netdb.h:53:13: note: previous declaration of 'setrpcent'
was here
/usr/include/tirpc/rpc/rpcent.h:69:13: warning: redundant redeclaration of
'endrpcent' [-Wredundant-decls]
/usr/include/rpc/netdb.h:54:13: note: previous declaration of 'endrpcent'
was here
/usr/include/tirpc/rpc/rpc.h:84:12: warning: redundant redeclaration of
'bindresvport' [-Wredundant-decls]
/usr/include/netinet/in.h:440:12: note: previous declaration of
'bindresvport' was here
Version 2.0.0 or yajl changed API. It is fairly trivial for us to
cope with both APIs in libvirt, so adapt.
* configure.ac: Probe for yajl2 API
* src/util/json.c: Conditional support for yajl2 API
* configure.ac libvirt.spec.in docs/news.html.in: update and document
the release
* po/*.po*: update localizations for german, polish, spanish, ukrainian
and vietnamese coming from transifex, regenerate
In Fedora 15, with clang 2.8, 'scan-build env' shows:
CCC_ANALYZER_ANALYSIS=-analyzer-check-objc-mem -analyzer-check-security-syntactic -analyzer-check-dead-stores -analyzer-check-objc-unused-ivars -analyzer-check-objc-methodsigs
But in rawhide, with clang 2.9, the same variable is set but
empty, implying the default set of analysis. We still want
sa_assert defined in that case, to stop clang from hitting
false positives.
* configure.ac (STATIC_ANALYSIS): Detect clang even when the set
of analyses is the default.
If one specify "--with-python=yes" but no python-devel package
is installed, we ignore it with just a notice message, which
doesn't give clear guide to user.
Remove custom code for checking compiler warnings, using
gl_WARN_ADD instead. Don't list all flags ourselves, use
gnulib's gl_MANYWARN_ALL_GCC to get all possible GCC flags,
then turn off the ones we don't want yet.
* acinclude.m4: Rewrite to use gl_WARN_ADD and gl_MANYWARN_ALL_GCC
* bootstrap.conf: Add warnings & manywarnings
* configure.ac: Switch to gl_WARN_ADD
* m4/compiler-flags.m4: Obsoleted by gl_WARN_ADD
* src/Makefile.am src/libvirt_private.syms configure.ac: share and
reuse the sexpr routines from sexpr.h of the old xen driver
* src/libxl/libxl_driver.c: implements libxlDomainXMLFromNative and
libxlDomainXMLToNative
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.
Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.
The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.
Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.
* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
src/opennebula/one_conf.c, src/opennebula/one_conf.h,
src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
to OpenNebula
* docs/drvone.html.in: Delete file
The libxenlight driver does not build against the tech preview
version of libxenlight in Xen 4.0. Only enable building the
driver against more complete libxenlight found in Xen 4.1.
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0. The driver is stateful and runs
privileged only.
Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI. Driver selection is based on the status
of xend. If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified. If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.
V6:
- Address several code style issues noted by Daniel Veillard
- Make drive work with xen:/// URI
- Hold domain object reference while domain is injected in
libvirt event loop. Race found and fixed by Markus Groß.
V5:
- Ensure events are unregistered when domain private data
is destroyed. Discovered and fixed by Markus Groß.
V4:
- Handle restart of libvirtd, reconnecting to previously
started domains
- Rebased to current master
- Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)
V3:
- Reserve vnc port within driver when autoport=yes
V2:
- Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
- Rebased to current master
- Plug memory leaks found by Stefano Stabellini and valgrind
- Handle SHUTDOWN_crash domain death event
[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
The kill() function doesn't exist on Win32, so it needs to be
checked for at build time & code disabled in cgroups
* configure.ac: Check for kill()
* src/util/cgroup.c: Stub out virCGroupKill* functions
when kill() isn't available
Currently, we need virIsDevMapperDevice() when we build libvirt with
disk or mpath storage drivers. So we should check device-mapper-devel
when we build with disk storage driver but without mpath storage
driver.
Two regressions:
Commit df1011ca broke builds for systems that lack devmapper
(non-Linux, as well as Linux with ./autogen.sh --without-libvirtd
and without the libraries present).
Commit ce6fd650 broke cross-compilation, due to a gnulib bug.
* .gnulib: Update to latest, for cross-compilation fix.
* src/util/util.c (virIsDevMapperDevice): Provide stub for
platforms not using storage driver.
* configure.ac (devmapper): Arrange to define HAVE_LIBDEVMAPPER_H.
devmapper issue reported by Wen Congyang.
The name convention of device mapper disk is different, and 'parted'
can't be used to delete a device mapper disk partition. e.g.
Name Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1
Error: Expecting a partition number.
This patch introduces 'dmsetup' to fix it.
Changes:
- New function "virIsDevMapperDevice" in "src/utils/utils.c"
- remove "is_dm_device" in "src/storage/parthelper.c", use
"virIsDevMapperDevice" instead.
- Requires "device-mapper" for 'with-storage-disk" in "libvirt.spec.in"
- Check "dmsetup" in 'configure.ac' for "with-storage-disk"
- Changes on "src/Makefile.am" to link against libdevmapper
- New entry for "virIsDevMapperDevice" in "src/libvirt_private.syms"
Changes from v1 to v3:
- s/virIsDeviceMapperDevice/virIsDevMapperDevice/g
- replace "virRun" with "virCommand"
- sort the list of util functions in "libvirt_private.syms"
- ATTRIBUTE_NONNULL(1) for virIsDevMapperDevice declaration.
e.g.
Name Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1
Vol /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 deleted
Name Path
-----------------------------------------
* configure.ac docs/news.html.in libvirt.spec.in: bump version and add docs
* po/*.po*: updated Gujarati, Polish and Dutch localisations and regenerated
Make with_packager and with_packager_version default to "no". This way
--without-packager-version (as shorthand for --with-packager(-version)=no)
works correctly too.
Prior to this patch libvirt outputs a line like this when
--with-packager(-version) was not specified
# ./daemon/libvirtd
14:11:15.018: 31796: info : libvirt version: 0.8.8, package: ()
Now the unspecified parts are correctly omitted.
Reported by Osier Yang.
The logging functions are enhanced so that immediately prior to
the first log message being printed to any output channel, the
libvirt package version will be printed.
eg
$ LIBVIRT_DEBUG=1 virsh
18:13:28.013: 17536: info : libvirt version: 0.8.7
18:13:28.013: 17536: debug : virInitialize:361 : register drivers
...
The 'configure' script gains two new arguments which can be
used as
--with-packager="Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10"
--with-packager-version="1.fc14"
to allow distros to append a custom string with package specific
data.
The RPM specfile is modified so that it appends the RPM version,
the build host, the build date and the packager name.
eg
$ LIBVIRT_DEBUG=1 virsh
18:14:52.086: 17551: info : libvirt version: 0.8.7, package: 1.fc13 (Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10)
18:14:52.086: 17551: debug : virInitialize:361 : register drivers
Thus when distro packagers receive bug reports they can clearly
see what version was in use, even if the bug reporter mistakenly
or intentionally lies about version/builds
* src/util/logging.c: Output version data prior to first log message
* libvirt.spec.in: Include RPM release, date, hostname & packager
* configure.ac: Add --with-packager & --with-packager-version args
* .gnulib: Update to latest, for sigpipe and sigaction modules.
* bootstrap.conf (gnulib_modules): Add siaction, sigpipe, strerror_r.
* tools/virsh.c (vshSetupSignals) [!SIGPIPE]: Delete, now that
gnulib guarantees it.
(SA_SIGINFO): Define for mingw fallback.
* src/util/virterror.c (virStrerror): Simplify, now that gnulib
guarantees the POSIX interface.
* configure.ac (AC_CHECK_FUNCS_ONCE): Drop redundant check.
(AM_PROG_CC_STDC): Move earlier, to keep autoconf happy.
virSetUIDGID() sets both the real and effective group and user of the
process, and additionally calls initgroups() to assure that the
process joins all the auxiliary groups that the given uid is a member
of.
Running an instance of the router advertisement daemon (radvd) allows
guests using the virtual network to automatically acquire an IPv6
address and default route. Note that acquiring an address only works
for networks with a prefix length of exactly 64 - radvd is still run
in other circumstances, and still advertises routes, but autoconf will
not work because it requires exactly 64 bits of address info from the
network prefix.
This patch avoids a race condition with the pidfile by manually
daemonizing radvd rather than allowing it to daemonize itself, then
creating our own pidfile (in addition to radvd's own file, which is
unnecessary, but there is no way to tell radvd to not create it). This
is accomplished by exec'ing it with "--debug 1" in the commandline,
and using virCommand's features to fork, create a pidfile, and detach
from the newly forked process.
All of the iptables functions eventually call down to a single
bottom-level function, and fortunately, ip6tables syntax (for all the
args that we use) is identical to iptables format (except the
addresses), so all we need to do is:
1) Get an address family down to the lowest level function in each
case, either implied through an address, or explicitly when no
address is in the parameter list, and
2) At the lowest level, just decide whether to call "iptables" or
"ip6tables" based on the family.
The location of the ip6tables binary is determined at build time by
autoconf. If a particular target system happens to not have ip6tables
installed, any attempts to run it will generate an error, but that
won't happen unless someone tries to define an IPv6 address for a
network. This is identical behavior to IPv4 addresses and iptables.
brSetInetAddress can only set a single IP address on the bridge, and
uses a method (ioctl(SIOCSETIFADDR)) that only works for IPv4. Replace
it and brSetInetNetmask with a single function that uses the external
"ip addr add" command to add an address/prefix to the interface - this
supports IPv6, and allows adding multiple addresses to the interface.
Although it isn't currently used in the code, we also add a
brDelInetAddress for completeness' sake.
Also, while we're modifying bridge.c, we change brSetForwardDelay and
brSetEnableSTP to use the new virCommand API rather than the
deprecated virRun, and also log an error message in bridge_driver.c if
either of those fail (previously the failure would be completely
silent).
Now the VMware driver doesn't depend on the ESX driver anymore.
Add a WITH_VMX option that depends on WITH_ESX and WITH_VMWARE.
Also add a libvirt_vmx.syms file.
Move some escaping functions from esx_util.c to vmx.c.
Adapt the test suite, ESX and VMware driver to the new code layout.
* configure.ac (dlopen): Cygwin dlopen is in libc; avoid spurious
failure.
(XDR_CFLAGS): Define when needed.
* src/Makefile.am (libvirt_driver_remote_la_CFLAGS): Use it.
* configure.ac (with_selinux): Check for <selinux/label.h>.
* src/security/security_selinux.c (getContext): New function.
(SELinuxRestoreSecurityFileLabel): Use it to restore compilation
when using older libselinux.
Autoconf 2.59 doesn't define ${localedir}, so libvirt was failing
to compile due to a missing LOCALEDIR until today's configmake fix.
* .gnulib: Update to latest for configmake fix.
* configure.ac (libpcap): Avoid AS_CASE.
Don't require dlopen, but link to ole32 and oleaut32 on Windows.
Don't expose g_pVBoxFuncs anymore. It was only used to get the
version of the API. Make VBoxCGlueInit return the version instead.
This simplifies the implementation of the MSCOM glue layer.
Get the VirtualBox version from the registry.
Add a dummy implementation of the nsIEventQueue to the MSCOM glue
as there seems to be no direct equivalent with MSCOM. It might be
implemented using the normal window message loop. This requires
additional investigation.
Without this fix, ./configure --with-libpcap will cause --with-libpcap=yes
to be implicitly passed down, which cause yes/bin/pcap-config to be
searched for rather than /usr/bin/pcap-config.
Also output pcap: no when pcap is not found or disabled.
