Commit Graph

35 Commits

Author SHA1 Message Date
Peter Krempa
706cd47487 qemuhotplugtest: Use real 'latest' capabilities for hotplug testing
Rather than test with synthetic capabilities which might get outdated
reuse testQemuGetRealCaps to fetch latest capabilities and use those.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-03 09:19:07 +02:00
Peter Krempa
c84e9a3b82 qemuhotplugtest: Enable 'lsilogic' SCSI controller
All real qemus support the 'lsilogic' controller and thus would pick it
as the default rather than virtio-scsi. Since lsilogic is limited in
some aspects we should test it with the proper default model.

In the future the fake capabilities will be replaced by real
capabilities so this test would break.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-03 09:19:07 +02:00
Peter Krempa
a58d22250c qemuhotplugtestdomain: Move all i686 test cases to x86_64
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2023-04-03 09:19:07 +02:00
Andrea Bolognani
0b464cd84f tests: Drop more QEMU driver config overrides
These are allegedly necessary to keep the output consistent,
but now that we're using a privileged config for the driver we
get the desired behavior out of the box, and as a bonus the
paths match what you would actually see on a regular host.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2023-03-06 14:44:13 +01:00
Peter Krempa
2ebb44a957 qemuhotplugtest: Switch to -blockdev mode
Enable blockdev mode and convert the expected commands to the modern
equivalents in preparation for removing the old-style hotplug code
paths.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-08-11 15:22:14 +02:00
minglei.liu
3078799fef qemu: support CDROM hotplug cdrom with USB/SCSI bus
QEMU supports hotplug of a cdrom device with USB or SCSI bus. Just
unblock these devices in qemuDomainAttachDeviceDiskLiveInternal() and
qemuDomainDetachPrepDisk().

Fixes: https://gitlab.com/libvirt/libvirt/-/issues/261

Signed-off-by: minglei.liu <minglei.liu@smartx.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-07-20 16:53:51 +02:00
Divya Garg
11ddab1daf Add the port allocation logic for isa-serial devices.
This commit takes care of following cases:
-> Check availability of requested ports.
  ->The total number of requested ports should not be more than
    VIR_MAX_ISA_SERIAL_PORTS.
  ->The ports requested should be less than VIR_MAX_ISA_SERIAL_PORTS.
  ->VIR_MAX_ISA_SERIAL_PORTS should correspond to MAX_ISA_SERIAL_PORTS
    specified in QEMU code commit def337ffda34d331404bd7f1a42726b71500df22.
-> Prevent duplicate device assignments to the same port.
-> In case no ports are provided in the XML, this patch scans the list of unused
   isa-serial indices to automatically assign available ports for this VM.

Signed-off-by: Divya Garg <divya.garg@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-01-14 15:41:57 +01:00
Peter Krempa
f900220494 qemuhotplugtestdomains: Remove unnecessary use of versioned pc machine types
The specific machine type is not important for the test. We can use 'pc'
instead.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-01-07 09:25:14 +01:00
Peter Krempa
102b84451a tests: qemu: Remove 's390-ccw' machine type from fake capabilities
Modern QEMUs don't support the machine type at all. Remove it from our
fake caps generator too and adjust test cases which depend on it.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-23 14:48:51 +02:00
Peter Krempa
7d3ca9dbdd qemuhotplugtest: Add also always-present capabilities
Use virQEMUCapsInitQMPBasicArch in qemuHotplugCreateObjects so that we
also add the always-present capabilities to the set of capabilities used
for the hotplug test and fix fallout.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-05-03 12:14:44 +02:00
Daniel P. Berrangé
e88367095f qemu: populate <audio> element with default config
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable

 - VNC - set to "none", unless passthrough of host env variable is set
 - SPICE - always set to "spice"
 - SDL - always passthrough host env
 - No graphics - set to "none", unless passthrough of host env variable is set

The setting of the QEMU_AUDIO_DRV env variable is done in the code which
configures graphics.

If no <audio> element is present, we now auto-populate <audio> elements
to reflect this historical default config. This avoids need to set audio
env when processing graphics.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-09 22:58:30 +00:00
Jonathon Jongsma
b79abf9c3c qemu: support hotplug of vdpa devices
By using the new qemu monitor functions to handle passing and removing
file descriptors, we can support hotplug of vdpa devices.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
2020-10-20 15:15:06 -04:00
Wang Xin
493d2769f2 qemu: add support for shmem-{plain, doorbell} role
Role(master or peer) controls how the domain behaves on migration.
For more details about migration with ivshmem, see
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/system/ivshmem.rst;hb=HEAD

It's a optional attribute in libvirt, and qemu will choose default
role for ivshmem device if the user is not specified.

With device property 'role', the value can be 'master' or 'peer'.
 - 'master' (means 'master=on' in qemu), the guest will copy
   the shared memory on migration to the destination host.
 - 'peer' (means 'master=off' in qemu), the migration is disabled.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Yang Hang <yanghang44@huawei.com>
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2020-08-03 10:57:47 +02:00
Michal Privoznik
a30078cb83 qemu: Create multipath targets for PRs
If a disk has persistent reservations enabled, qemu-pr-helper
might open not only /dev/mapper/control but also individual
targets of the multipath device. We are already querying for them
in CGroups, but now we have to create them in the namespace too.
This was brought up in [1].

1: https://bugzilla.redhat.com/show_bug.cgi?id=1711045#c61

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Lin Ma <LMa@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2020-03-12 08:04:40 +01:00
Thomas Huth
e7a65484ba qemu: Refuse to use "ps2" on machines that do not have this bus
The "ps2" bus is only available on certain machines like x86. On
machines like s390x, we should refuse to add a device to this bus
instead of silently ignoring it.

Looking at the QEMU sources, PS/2 is only available if the QEMU binary
has the "i8042" device, so let's check for that and only allow "ps2"
devices if this QEMU device is available, or if we're on x86 anyway
(so we don't have to fake the QEMU_CAPS_DEVICE_I8042 capability in
all the tests that use <input ... bus='ps2'/> in their xml data).

Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1763191
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-01-23 12:57:03 +01:00
Daniel P. Berrangé
0279a51b83 tests: fix name of 32-bit x86 QEMU binary
The 32-bit x86 binary is called qemu-system-i386, not
qemu-system-i686. This mistake across many test XML files was
not noticed because the mistake was also made in testutilsqemu.c
when mocking the capabilities.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-03 13:57:44 +00:00
Shivaprasad G Bhat
944a35d7f0 tests: Add test case for QEMU pci-hostdev hotplug
This patch adds hostdev test cases in qemuhotplugtest.c.

Note: the small tweak inside virpcimock.c was needed because
the new tests added a code path in which virHostHasIOMMU()
(virutil.c) started being called, and the mocked '/sys/kernel/'
prefix that is mocked in virpcimock.c wasn't being considered
in the opendir() mock. An alternative to avoid these situations
in virpcimock.c is implemented in the next patch.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-09-09 16:44:24 +02:00
Michal Privoznik
ee2c5ef39f qemuhotplugtest: Don't plug a SCSI disk at unit 7
Unit number 7 is kind of special. It's reserved for SCSI
controller. The comment in virDomainSCSIDriveAddressIsUsed()
summarizes that pretty nicely. Libvirt would never generate
such address.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2019-04-18 17:08:33 +02:00
Michal Privoznik
17ddfd420a qemuhotplugtest: Test guestfwd attach and detach
Previous two commits demonstrate a hole in our test scenario.
Fix that.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-14 09:22:17 +01:00
Jiri Denemark
1554eafbe6 qemu: Don't assign alias to disabled balloon device
<memballoon model='none'/> is the only way to disable balloon driver
since libvirt will add one automatically if the memballoon element is
missing. In other words, there's no balloon device if model is 'none'
and generating an alias for it makes no sense. The alias will be ignored
when parsing the XML and it will disappear once libvirtd is restarted.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2018-03-19 21:22:43 +01:00
John Ferlan
13d216617d qemu: Fetch/save the default SCSI controller model during hotplug
If we're going to add a controller to the domain, let's set the
default SCSI model value if we cannot find another SCSI controller
already present.

NB: Requires updating the live output test data since the model
will now be formatted.
2018-01-31 11:32:04 -05:00
Lin Ma
7c7ec17738 tests: Drop IDE controller in CCW
Adding an IDE controller for a machinetype that has no built-in IDE
controller, libvirt will log an error. Currently the machinetype list
which returns by qemuDomainMachineHasBuiltinIDE only includes 440fx,
malta, sun4u and g3beige.

Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
2017-12-06 19:50:21 -05:00
Peter Krempa
adcc31bb89 qemu: domain: Fix backing store terminator for non-backing local files
Raw local files do not pass through the backing store detector and thus
the code did not allocate the required backing store terminator for
them. Previously the terminating element would be formatted into the XML
since the default values used for the metadata allowed that. This is a
regression since a693fdba01 which was not detected in the review.

This patch also reverts all the changes in the test files.
2017-11-30 22:40:23 +01:00
Andrea Bolognani
72bf21f233 qemu: Set targetModel based on targetType for serial devices
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2017-11-28 15:46:33 +01:00
Andrea Bolognani
4fb8ff9987 conf: Drop virDomainChrDeviceType.targetTypeAttr
This attribute was used to decide whether to format the type
attribute of the <target> element, but the logic didn't take into
account all possible cases and as such could lead to unexpected
results. Moreover, it's one more thing to keep track of, and can
easily fall out of sync with other attributes.

Now that we have VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE_NONE, we can
use that value to signal that no specific target type has been
configured for the serial device and as such the attribute should
not be formatted at all. All other values are now formatted.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2017-11-28 15:46:32 +01:00
Peter Krempa
19448a2561 conf: Properly parse <backingStore/>
The terminator would not be parsed properly since the XPath selector was
looking for an populated element, and also the code did not bother
assigning the terminating virStorageSourcePtr to the backingStore
property of the parent.

Some tests would catch it if there wasn't bigger fallout from the change
to backing store termination in a693fdba01. Fix them properly now.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509110
2017-11-13 13:13:29 +01:00
Michal Privoznik
dc162adb90 qemuhotplugtest: Test user supplied alias
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-10-27 14:43:21 +02:00
Peter Krempa
a693fdba01 Terminate backing chains explicitly
Express a properly terminated backing chain by putting a
virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly
used helpers simplify this greatly.

The change fixes a bug as formatting an incomplete backing chain and
parsing it back would end up in expressing a terminated chain since
src->backingStoreRaw was not populated. By relying on the terminator
object this can be now processed appropriately.
2017-10-17 06:19:18 +02:00
Michal Privoznik
361c8dc179 qemu: hot-plug of watchdog
https://bugzilla.redhat.com/show_bug.cgi?id=1447169

Since domain can have at most one watchdog it simplifies things a
bit. However, since we must be able to set the watchdog action as
well, new monitor command needs to be used.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2017-10-05 14:23:20 +02:00
Peter Krempa
d65781bf06 tests: hotplug: Test disks with duplicate WWNs 2017-06-23 14:11:25 +02:00
Pavel Hrdina
e6e26a899d tests: unify qemu binary paths for all qemu related tests
Our test data used a lot of different qemu binary paths and some
of them were based on downstream systems.

Note that there is one file where I had to add "accel=kvm" because
the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm".

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-11 14:06:47 +02:00
Martin Kletzander
fb2d0cc633 qemu: Add support for hot/cold-(un)plug of shmem devices
This is needed in order to migrate a domain with shmem devices as that
is not allowed to migrate.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-11-02 17:36:50 +01:00
Tomasz Flendrich
ed8f236491 qemuhotplugtest: Add tests for ccw devices
There's a plan to rework the address handling, so testcases
that verify hotplugging ccw devices will help in avoiding
regression.

In this commit, some files are duplicated because of the way
qemuhotplug.c calculates the expected xml filenames.
I plan on changing that to explicitly stating the basis domain
xml, the device xml, and the expected xml.
2016-07-25 10:51:08 +02:00
Ján Tomko
f2a781ceb0 Assign addresses on USB device hotplug
USB disks, redirected devices, host devices and serial devices
are supported.
2016-07-21 08:30:26 +02:00
Tomasz Flendrich
b0b4a35c53 qemuhotplugtest: Move domain and device XMLs to different directories
This way we can safely differentiate what XMLs contain whole domain
definitions and which contain just devices.  Thanks to that we can
test the domain XMLs in virschematest again.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-07-11 17:09:29 +02:00