This affects more than src/Makefile.am as the rule to generate source
files for protocols is generic for all sub-directories.
Affected files are:
src/admin/admin_protocol.{h,c}
src/locking/lock_protocol.{h,c}
src/logging/log_protocol.{h,c}
src/lxc/lxc_monitor_protocol.{h,c}
src/remote/{lxc,qemu,remote}_protocol.{h,c}
src/rpc/{virkeepalive,virnet}protocol.{h,c}
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our naming was not consistent. Use the protocol name as prefix for all
generated files.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There was no need to handle files for translation from build directory
but that will change with following patches where we will stop
generating source files into source directory.
In order to have them included for translation we have to prefix each
file with SRCDIR or BUILDDIR.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we did not support VPATH builds and everything was
generated into source directory. The introduction of VPATH builds
did not changed the way how our translation files are handled.
This patch changes the rules to generate everything into build
directory and stops distributing generated files in order to have
properly separated VPATH builds.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move generated_files variable closer to the sc_po_check rule and
remove non-existent gnulib internal path.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce new rule 'generated-sources' as a helper for PO files check
to make sure that all generated files are prepared and to not duplicate
the list on different places. This will be used as a dependency for
sc_po_check rule instead of duplicated list of generated files.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit <22d8e27ccd5faf48ee2bf288a1b9059aa7ffd28b> introduced our
syntax-check.mk file based on gnulib rules. However, the rule was
completely ignored as we don't have POTFILES.in file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we forbid builds in source directory we can remove a lot of
ignores that are created during build time. To make the cleanup easier
in the future create a sections in our .gitignore file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we've allowed builds in the main src dir, but meson does
not support this. Explicitly force separate build dir in autotools to
align with meson. We must re-enable dependency tracking which the RPM
%configure macro turns off. Without this, the build dir doesn't get
the source directory tree mirrored.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemuDomainGetStatsIOThread() accesses the monitor by calling
qemuDomainGetIOThreadsMon(). And it's also marked as "need
monitor" in qemuDomainGetStatsWorkers[]. However, it's not
checking if acquiring job was successful.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The qemuDomainObjEnterMonitor() should not be called without a
job set. Catch this error and produce a warning message if such
call occurred.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Libvirtd has set SIGPIPE to ignored, and virFork resets all signal
handlers to the defaults. But child process may write logs to
stderr/stdout, that may generate SIGPIPE if journald has stopped.
So set SIGPIPE to a dummy no-op handler before unmask signals in
virFork(), and the handler will get reset to SIG_DFL when execve()
runs. Now we can delete sigaction() call entirely in virExec().
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
When libvirt first implemented a stable and configurable MAC address
for the bridges created for libvirt virtual networks (commit
5754dbd56d, in libvirt v0.8.8) most distro stable releases didn't
support explicitly setting the MAC address of a bridge; the bridge
just always assumed the lowest numbered MAC of all attached
interfaces. Because of this, we stabilized the bridge MAC address by
creating a "dummy" tap interface with a MAC address guaranteed to be
lower than any of the guest tap devices' MACs (which all started with
0xFE, so it's not difficult to do) and attached it to the bridge -
this was the inception of the "virbr0-nic" device that has confused so
many people over the years.
Even though the linux kernel had recently gained support for
explicitly setting a bridge MAC, we deemed it unnecessary to set the
MAC that way, because the other (indirect) method worked everywhere.
But recently there have been reports that the bridge MAC address was
not following the setting in the network config, and mismatched the
MAC of the dummy tap device (which was still correct). It turns out
that this is due to a change in systemd-242 that persists whatever MAC
address is set for a bridge when it's initially started. According to
the systemd NEWS file entry for version 242
(https://github.com/systemd/systemd/blob/master/NEWS):
"if a bridge interface is created without any slaves, and gains
a slave later, then now the bridge does not inherit slave's MAC."
This change was the result of:
https://github.com/systemd/systemd/issues/3374
(apparently if there is no MAC saved for a bridge by the name of a
bridge being created, the random MAC generated during creation is
saved, and then that same MAC is used to explicitly set the MAC each
time it is created). Once a bridge has an explicitly set MAC, the "use
the lowest numbered MAC of attached devices" rule is ignored, so our
dummy tap device is like the goggles - it does nothing! (well, almost).
We could whine about changes in default behavior, etc. etc., but
because the change was in response to actual user problems, that seems
likely a fruitless task. Fortunately, time has marched on, and even
distro releases that are old enough that they are no longer supported
by upstream libvirt (e.g. RHEL6) have support for explicitly setting a
bridge device MAC address, either during creation or with a separate
ioctl after creation, so we can now do that.
To enable explicitly setting the mac during bridge creation, we add a
mac arg to virNetDevBridgeCreate(). In the case of platforms where
the bridge is created with a netlink RTM_NEWLINK message, we just add
that mac to the message. For platforms that still use an ioctl (either
SIOCBRADDBR or SIOCIFCREATE2), we make a separate call to
virNetDevSetMAC() after creating the bridge.
(NB: I was unable to test the calling of virNetDevSetMAC() from the
SIOCIFCREATE2 (BSD) version of virNetDevBridgeCreate(); even though I
managed to get a FreeBSD system setup and libvirt built there, when I
tried to start the default network the SIOCIFCREATE2 ioctl itself
failed, so it never even got to the virNetDevSetMAC(). That leaves the
FreeBSD implementation untested.)
This makes the dummy tap pointless for purposes of setting the MAC
address, but it is still useful for IPv6 DAD initialization (which
apparently requires at least one interface to be attached to the
bridge and online), as well as for setting an initial MTU for the
bridge, so it hasn't been removed.
(NB: we can safely *always* call virNetDevBridgeCreate() with
&def->mac from the network driver because, in spite of the existence
of a "mac_specified" bool in the config suggesting that it may not
always be present, in reality a mac address will always be added to
any network that doesn't have one - this is guaranteed in all cases by
commit a47ae7c004)
https://bugzilla.redhat.com/show_bug.cgi?id=1760851
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Although until now, any use of the extra_args argument (a pointer to a
struct containing extra attributes to add the the RTM_NEWLINK message)
would always have the ifindex and mac set, so the code could assume it
was safe to add both to the message if extra_args != NULL. There is
now a use for setting a MAC address in the RTM_NEWLINK without setting
the ifindex, so we should check each of these separately.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The file was introduced in be03587a34, but it was not added
to $(cpumap_DATA) at the time and so it didn't show up in the
distribution archive.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commit 01ca4010d8 (libvirt v5.1.0) moved address reservation for
hotplugged interface devices up to an earlier point in
qemuDomainAttachNetDevice(), because that function calls
qemuDomainSupportsNicdev() (in the case of
VIR_DOMAIN_NET_TYPE_VHOSTUSER), and qemuDomainSupportsNicdev() needs
to know the address type (for ARM machinetypes) and returns incorrect
results when the address type is "none".
This bugfix unfortunately caused a regression, because it also made PCI
address reservation happen before we noticed that the device was a
*hostdev* interface. Those interfaces are hotplugged by just calling
out to qemuDomainAttachHostdevDevice() - that function would then also
attempt to reserve the *same PCI address* that had just been reserved
in qemuDomainAttachNetDevice().
The solution is to move the bit of code that short-circuits out to
virDomainHostdevAttach() up *even earlier* so that no PCI address has
been allocated by the time it's called.
https://bugzilla.redhat.com/show_bug.cgi?id=1744523
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This introduces semantic validation for SVE-related features,
preventing the user from combining them in invalid ways; it also
automatically enables overall SVE support if any SVE vector
length has been enabled by the user to make sure QEMU behaves
correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now we only perform very basic validation, such as making sure
that the user is not trying to enable/disable unknown CPU features
and the like.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The only feature we care about for the moment is SVE, which can
be controlled both with a coarse granularity by turning it on/off
completely and with a finer granularity by enabling/disabling
individual vector lengths.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The ARM implementation of query-cpu-model-expansion only
supports full expansion, so we have to make sure we're using
that expansion mode if we want to obtain any useful data.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
CPU features are available on ARM only wherever the
query-cpu-model-expansion QMP command is available, same as
on s390. Update qemuBuildCpuModelArgStr() to reflect this
fact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Mirrors the existing QEMU_CAPS_X86_MAX_CPU.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're going to use it on non-x86 soon, so it needs a more
generic name: virQEMUCapsObjectPropsMaxCPU.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately this results in a lot of churn because of the eigth
hundred and change QEMU commits since the file was last touched,
but the only part we actually care about is the fact that the
query-cpu-model-expansion QMP command is now available on aarch64.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's possible that virBitmapNewString returns NULL with an error
string (and not an allocation failure that would abort); however, if
virBitmapToString is called with a NULL @bitmap, then it will fail
in an ugly manner. So rather than have if (!map && !str) logic, split
the checks for each variable.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 1c8113f9c added the call to virTypedParamsGetString without
a return value check which caused Coverity to complain especially
since other checks for the same function are made.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 075523438 added a direct reference to @cookie even though
it may be NULL as shown by a comment a few lines previous - so add
the check here as well.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The @ifname is listed as an ATTRIBUTE_NONNULL(1) parameter, so
checking for _NULLABLE causes a coverity build failure - remove
that and if it's NULL for the test let's fail miserably.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 66e2adb2ba moved the code and the coverity comment which now
was useless since the context was in lxcContainerSetupPivotRoot.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 944a35d7f0 added @fakerootdir; however, there are multiple
paths out of mymain that didn't free the memory - so just use the
g_autofree to resolve the potential leak.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 17561eb36 modified the logic to check "if (!event)" for an
attribute that was not supposed to be passed as NULL. This causes
the static checker/Coverity build to fail. Since the check is made,
alter the header.
Also add an error message since returning -1 without some sort of
error message as previously would have happened with the failed
VIR_STRDUP so that the eventual error doesn't get the default
for some reason message.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The @valueTypeUtf8 references need to use the STREQ_NULLABLE since
they're variantly filled in by @valueTypeUtf16.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A few new companies and individuals contributed to libvirt since
the last time the gitdm configuration was updated.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
The "Security" section has been used in the past, so we're only
documenting existing behavior; the "Packaging changes" will be
used in the next commit, as well as in future releases when we
make more changes that are relevant to packagers, such as the
switch to Meson.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Xen support for specifying ACPI firmware path was introduced in the
5.9.0 dev cycle, not 5.8.0 as currently indicated by the docs.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we don't have to deal with errors of virBuffer we can also make
this function void.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
