The purpose of this function is to give a short description that would
be change when a host CPU is replaced with a different model. This is
currently implemented by reading /proc/cpuinfo.
It should be implemented for all architectures for which the QEMU driver
stores host CPU data in the capabilities cache. In other words for archs
that support host-model CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, the @vm is passed in as an argument and
testCompareXMLToArgvCreateArgs() is called over it which means
under the hood qemuProcessPrepareDomain() is called. But at the
point where ValidateSchema() is called, the domain object is
already 'prepared', i.e. all device aliases are assigned and so
on. But our code is not prepared to 'prepare' a domain twice - it
simply overwrites all the pointers leading to a memory leak.
Fortunately, this is only the problem of this test.
Resolve this by constructing the domain object from scratch.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Our hotplug test cases are weak in comparison to the qemuxml2argvtest.
Use all the the input data to also validate the arguments for -netdev
and -blockdev against the appropriate commands of the QMP schema.
Note that currently it's done just for the _CAPS versions of tests but
commenting out a line in the test file allows to validate even cases
which don't use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add testQEMUSchemaLoad and refactor internals so that we can load the
QMP schema from an arbitrary caps replies file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It always loads the latest schema. Prepare for loading others as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuxml2argv test suite is way more comprehensive than the hotplug
suite. Since we share the code paths for monitor and command line
hotplug we can easily test the properties of devices against the QAPI
schema.
To achieve this we'll need to skip the JSON->commandline conversion for
the test run so that we can analyze the pure properties. This patch adds
flags for the comand line generator and hook them into the
JSON->commandline convertor for -netdev. An upcoming patch will make use
of this new infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that all code paths generate JSON props we can remove the conversion
to command line arguments and back in the monitor code.
Note that the test which is removed in this commit will be replaced by a
stronger testsuite later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There are multiple steps of setting up the domain definition prior to
formatting the command line for the tests. Extract it to a separate
function so that it's self-contained and also will allow re-running the
command line formatting which will be necessary for QMP schema
validation tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In some cases we use 'on/off' for command line arguments. Add a switch
which will select the preferred spelling for a specific usage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow reusing this for formatting of netdev_add arguments into -netdev.
We need to be able to skip the 'type' property as it's used without the
prefix by our generator.
Add infrastructure which allows skipping property with a specific name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In qemu the argument of 'ipv6-net' is split up into 'ipv6-prefix' and
'ipv6-prefixlen'. Additionally now that 'netdev_add' was qapified, only
the real properties are allowed. Switch to using them explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'tftp' storage protocol was supported by qemu until 2.7.0. Add an
interlock when blockdev is used and drop the test case for it as it's
IMO not worth adding another test file just for that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Make our QMP schema validator reject any use of schema entries which
were deprecated by QEMU except for those whitelisted.
This will allow us to catch this before qemu actually removed what we'd
still use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the generated test cases for the 'cpu-add' and 'change' command
which are deprecated by qemu. We now use device-add and
blockdev-change-media instead so we are okay if they will be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The command was replaced with 'query-cpus-fast' which is always used
when detected by the capabilities so we can allow our test usage of
the deprecated command even if it will be removed from the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the test for the newer command into a new function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For sanity-chcecking of deprecated commands which are still used on some
old code paths which used the simple generated test cases add a
mechanism to mark them as deprecated so schema checking can be skipped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have a few cases validating that the code behaves correctly in
pre-modern hotplug era. This is controled by the 'modern' flag for the
test. Since 'cpu-add' command is now deprecated in qemu, there is a
modern replacement for it, and the test output is checked against
expected commands we can skip schema validation for the legacy command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some test cases are used to validate interactions with old qemu. We need
to skip validation of deprecation with those once it will be added.
In case of commands which were already replaced by code based on
capabilities we can skip the full validation once the command is
removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the code so that we pass in the repeated 'schema' and 'debug'
arguments via a new struct testQEMUSchemaValidateCtxt. This will
simplify adding new parameters in the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor all cleanup to avoid manual clearing, unnecessary labels and
return value variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will add validation which rejects objects with the
'deprecated' feature in the QMP schema. To support tests which deal with
legacy properties in case when a command or argument is marked as
deprecated or removed by qemu qemuMonitorTestSkipDeprecatedValidation
will allow configuring the tests to ignore such errors.
In case of commands/features which are not yet replaced, the
'allowRemoved' bool should not be set to provide a hard notification
once qemu drops the command.
Note that at this point 'allowRemoved' only includes whole commands, but
not specific properties.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer return the error via the monitor, so the function no longer
returns '1'. Remove the mention from comment and fix callers to stop
looking for the return value of '1'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the ad-hoc command validation in favor of the new helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new helper splits out all steps necessary to validate a QMP command
against the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only tests expected to fail should allow unused commads as the normal
tests will consume all of them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is 'numa-mem-supported' machine attribute which specifies
whether '-numa mem=' is supported. Store it in our capabilities
as it will be used in later commits when building the command
line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is not yet supported by virtiofsd.
Fixes#23 a.k.a. https://gitlab.com/libvirt/libvirt/-/issues/23
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This capability flags support for `-device pvscsi`, which provides the
VMware paravirtual SCSI controller.
Signed-off-by: Chris Jester-Young <cky@cky.nz>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Remember the preferred placement of <auth> and <encryption> for a disk
source across libvirtd restarts.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modern way to store <auth> and <encryption> of a <disk> is under
<source>. This was added to mirror how <backingStore> handles these and
in fact they are relevant to the source rather than to any other part of
the disk. Historically we allowed them to be directly under <disk> and
we need to keep compatibility.
This wasn't a problem until introduction of -blockdev in qemu using of
<auth> or <encryption> plainly wouldn't work with backing chains.
Now that it works in backing chains and can be moved back and forth
using snapshots/block-commit we need to ensure that the original
placement is properly kept even if the source changes.
To achieve the above semantics we need to store the preferred placement
with the disk definition rather than the storage source definitions and
also ensure that the modern way is chosen when the VM started with
<source/encryption> only in the backing store.
https://bugzilla.redhat.com/show_bug.cgi?id=1822878
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically the virtio-blk frontend by default enabled SCSI emulation
and tried to do SCSI command passthrough. As this was enabled by default
there's a fallback mechanism in place in cases when the backend doesn't
support SCSI for any reason.
This is not the case when disk type=lun is used with 'scsi-block' via
'virtio-scsi'.
We did not restrict configurations when the user picks 'qcow2' or any
other format as format of the disk, in which case the emulation is
disabled as such configuration doesn't make sense.
This patch unifies the approach so that 'raw' is required both when used
via 'virtio-blk' and 'virtio-scsi' so that the user is presented with
the expected configuration. Note that use of <disk type='lun'> is
already very restrictive as it requires a block device or iSCSI storage.
Additionally the scsi emulation is now deprecated by qemu with
virtio-blk as it conflicts with virtio-1 and the alternative is to use
'virtio-scsi' which performs better and is along for a very long time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The property was deprecated. Don't format it based on the new capability
if the user didn't explicitly request it.
https://bugzilla.redhat.com/show_bug.cgi?id=1829550
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically the 'scsi' passthrough feature of virtio-blk-pci
was enabled by default. Libvirt was disabling it due to security
implications outlined in libvirt commit v0.9.9-4-g177db08775 if it was
not explicitly requested. In qemu commit v2.4.0-1566-ged65fd1a27 the
default value was changed to disabled in preparation for virtio-1.
Starting from QEMU-5.0 the 'scsi' property was also deprecated. There
replacement for the functionality is to use 'virtio-scsi' for the
purpose. This isn't a direct replacement though.
Add capability named QEMU_CAPS_VIRTIO_BLK_SCSI_DEFAULT_DISABLED which
allows us to stop formatting the 'scsi=' property if it's disabled by
default and not requested so that we don't use deprecated features.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Help QEMU in deprecation of -drive if=none without the need to refactor
all old boards. Stop masking out -blockdev support when -drive if=sd
needs to be used. We achieve this by forbidding blockjobs and
special-casing all other code paths. Blockjobs are sacrificed in this
case as SD cards are a corner case for some ARM boards and are thus not
used commonly.
https://bugzilla.redhat.com/show_bug.cgi?id=1821692
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can't set the type of the device on the 'sd' bus and realistically a
cdrom doesn't even make sense there. Forbid it.
Note that the output of in disk-cdrom-bus-other.x86_64-latest.args
switched to blockdev as it's no longer locked out due to use of a disk
on 'sd' bus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'vexpress-a9' ARM board supports the native 'sd' bus as well as
virtio. Add a test case for proving that upcoming changes to handling of
'sd' work. This config was also tested with real qemu and the qemu
process starts correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case of 'sd' cards we'll use pre-blockdev code also if qemu supports
blockdev. In that specific case we'll need to mask out blockdev support
for 'sd' disks. Plumb in a boolean to allow it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the function and passing of 'def' through the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously we've validated it in qemuCheckDiskConfig which was directly
called from the command line generator. Move the checks to the validator
where they belong.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code from qemuCheckDiskConfigBlkdeviotune in
src/qemu/qemu_commandline.c to
qemuValidateDomainDeviceDefDiskBlkdeviotune.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to DO_TEST_CAPS_LATEST for all of them and also add pre-blockdev
case for 'disk-discard' as we had it before.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the tests to DO_TEST_CAPS_LATEST. Since switch to blockdev stopped
us formatting the tunning parameters on the command line let's also add
version cases for qemu-4.1 data which doesn't enable blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit a13b2905f7 missed an adjustment to a test that is only run when
building against xen <= 4.9, where LIBXL_HAVE_BUILDINFO_NESTED_HVM is
not defined. Adjust fullvirt-cpuid-legacy-nest test similar to the others.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When no video device is specified in config we should set both
hvm.nographic to 1 and hvm.vga.kind to NONE.
Without hvm.vga.kind=LIBXL_VGA_INTERFACE_TYPE_NONE both -nographic and
-device 'cirrus-vga' are on qemu cmdline.
Signed-off-by: Artur Puzio <contact@puzio.waw.pl>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Turns out that it's not enough to pass the qemu:///embed root to
virQEMUDriverConfigNew(), you also have to make sure the same
string is copied into the virQEMUDriver structure yourself, and
not doing so in our case resulted in the cleanup never happening
and in distcheck failing because of that.
On the other hand, actually setting config->embeddedRoot would
result in different paths being generated for each test run, which
would obviously break qemuxml2argvtest, so that's not an option
either.
This reverts commit d98cc1968e.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that the QEMU driver natively supports storing all its runtime
data inside an arbitrary directory, we can avoid having multiple
copies of the same logic in the test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To attempt to catch unit tests which accidentally create files in $HOME,
or $XDG_RUNTIME_DIR, poison these env vars by pointing them to
directories which don't exist. This should give easier to debug test
failures. For example:
$ VIR_TEST_DEBUG=1 ./qemuhotplugtest
Could not initialize HostdevManager - operation failed: Failed to create state dir '/bad-test-used-env-xdg-runtime-dir/libvirt/hostdevmgr'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need this for all tests that use virHostdevManager, because
during creation of this object for unprivileged connections
like those used in the test suite we would end up writing inside
the user's home directory.
That's bad manners in general, but when running the test suite
inside a purposefully constrained environment such as the one
exposed by pbuilder, it turns into an outright test failure:
Could not initialize HostdevManager - operation failed: Failed
to create state dir '/nonexistent/.cache/libvirt/hostdevmgr'
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The churn in the output files is caused primarily by the fact that
blockdev support has been introduced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The churn in the output files is caused primarily by the fact that
replies were generated on a POWER9 machine, which is good because
we didn't have coverage of that before.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, qemucapsprobe fails when libvirt is not already installed
on the system:
$ ./tests/qemucapsprobe /path/to/qemu-system-ppc64 >/dev/null
I/O warning : failed to load external entity "/usr/share/libvirt/cpu_map/index.xml"
2020-05-06 09:49:59.136+0000: 269822: info : libvirt version: 6.4.0
2020-05-06 09:49:59.136+0000: 269822: info : hostname: [...]
2020-05-06 09:49:59.136+0000: 269822: warning : virQEMUCapsLogProbeFailure:5127 :
Failed to probe capabilities for /path/to/qemu-system-ppc64: XML error: failed to
parse xml document '/usr/share/libvirt/cpu_map/index.xml'
It would be great if the tool could work entirely out of the build
directory, and this patch achieves just that.
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Start the new capability file for the new development cycle of QEMU.
Note that compared to previous version this was generated on an AMD cpu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of the following pattern:
type ret;
...
ret = func();
return ret;
we can use:
return func()
directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since QEMU 2.10 it is possible to disable TCG when building
QEMU. Introduce a capability that reflects this.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move capability validation of virtio options from command line
generation to post-parse device validation where it belongs.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add separate tests for individual options and devices for virtio-options
to have the ability to do more fine-granular testing of various
combinations.
Also, add negative tests for unavailable capabilities.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Convert the virtio-options test in qemuxml2argv and qemuxml2xml to use
the latest available QEMU capabilities.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch adds the implementation of the IBS pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_IBS capability added
in the previous patch.
IBS can have the following values: "broken", "workaround",
"fixed-ibs", "fixed-ccd" and "fixed-na".
This is the XML format for the cap:
<features>
<ibs value='fixed-ibs'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
IBS (Indirect Branch Speculation) is the last capability added
in QEMU 2.12 related to Spectre mitigation for Power. It was
added in commit 4be8d4e7d935.
This patch introduces it as QEMU_CAPS_MACHINE_PSERIES_CAP_IBS.
Like CFPC and SBBC, users might want to tune in IBS based on
their HW and guest OS requirements, and it's better to do it
so in a proper Libvirt feature than to put QEMU arguments
in the middle of the domain XML.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the SBBC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC capability added
in the previous patch.
Like the previously added CFPC feature, SBBC can have the values
"broken", "workaround" or "fixed". Extra code is required to handle
it since it's not a regular tristate capability.
This is the XML format for the cap:
<features>
<sbbc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SBBC (Speculation Barrier Bounds Checking) is another capability
related to Spectre mitigation efforts in Power processors. It
was implemented in QEMU 2.12 by commit 09114fd81799.
This patch introduces it as QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC to
be implemented in the next patch. Like the case with the now
implemented CFPC, exposing this feature in the XML allows for
a cleaner way for users to tune the SBBC accordingly, given
that not all hypervisor and guest setups supports this
Spectre mitigation.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the CFPC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC capability added
in the previous patch.
CPFC can have the values "broken", "workaround" or "fixed". Extra
code is required to handle it since it's not a regular tristate
capability.
This is the XML format for the cap:
<features>
<cfpc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
CFPC (Cache Flush on Privilege Change) is one of the capabilities
added to QEMU to mitigate Spectre vulnerabilities in Power chips.
It was implemented in QEMU 2.12 by commit 6898aed77f46.
This capability is still used today due to differences in how
the host setup (hardware and firmware/kernel) can handle this
mitigation. Its default value also varies with the pseries machine
version of the time. There's also certain OSes, like AIX, that
might not support the default value of the pseries machine the
guest uses.
Exposing this in the Libvirt XML as a feature will allow users to tune
CFPC values in a cleaner way, instead of hacking parameters in
<qemu:commandline> elements.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To prevent unexpected situations where a change in code would stop
looking at some of the tested commands go unnoticed add a mechanism to
force consumption of all test items.
Since there are a few tests which would be hard to fix add also a
mechanism to opt-out of the check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For each test monitor entry store an optional string which will allow to
identify it. This will be used later when checking that all registered
monitor commands were used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Until now we've tried to report errors from the test monitor code by
passing them back as failures from the qemu we simulate. This doesn't
work well in cases when the monitor logic does not detect failures or
has fallback code. Additionally there isn't much use for continuing the
test execution after first failure as in most cases the test data will
be misaligned and all other calls will fail as well.
To make the errors more obvious this patch moves away from reporting
them via the simulated monitor to reporting them to stderr and
exit()ing afterwards. While this might be less convenient
when developing tests it actually makes failures in the test suite
really obvious and doesn't require any opt-in from the tests themselves.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
One of the test cases attempted to use test data meant for modern qemu
without asserting the 'modern' flag. Since that changes the commands
used to query state it won't work with data meant for the modern case.
Remove the invalid test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test verifies unplug of a disk with the persistent reservations
helper. The 'object-del' used to remove the helper was not mentioned in
the list of expected commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's a method of the test monitor and it adds a response to the monitor
output. The original qemuMonitorTestAddErrorResponse method is renamed
to qemuMonitorTestAddErrorResponseInternal
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our implementation wasn't quite able to parse everything that qemu does.
This patch rewrites the parser to a code that semantically resembles the
combination of 'nbd_parse_filename' and 'inet_parse' methods in qemu to
be able to parse the strings in an equivalent manner.
The only thing that libvirt doesn't do is to check the lengths of
various components in the nbd string in places where qemu uses constant
size buffers.
The test cases validate that some of the corner cases involving colons
are parsed properly.
https://bugzilla.redhat.com/show_bug.cgi?id=1826652
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add io_uring value to capability replies.
The capability QEMU_CAPS_AIO_IO_URING will be used for io_uring aio mode,
introduced from QEMU 5.0, linux 5.1.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'human-monitor-command' equates to the 'drive-del' command issued by
the hotplug code on successful detach of a device. This means that it's
not issued for failed attempts and thus should not be added to the
expected list. Unfortunately our test monitor doesn't ensure that all
expected commands were consumed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We always queue the DEVICE_DELETED events before successful return from
the command so that tests are reliable. This means we can decrease the
unplug timeout as it's guaranteed to be executed in correct order.
According to my testing it shaves off ~450ms of test run:
real 0m0.721s
vs.
real 0m0.259s
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'@vm' is used to use a different timeout for ppc64 guests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Bump to v5.0.0-rc3-8-g3119154db0 and make sure that 'liburing' is picked
up by qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In 97a0aa2467 the @actual variable was renamed to @confactual.
However, the commit missed non-Linux case resulting in a broken
build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
New tests are required to cover some new XML syntax entry for
<lease/> option. This includes schema testing and other features
like unit attribute and lease value. This commit includes hostsfile
checks adding new files for each test case that is manipulating <host/>
tag.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If an user is trying to configure a dhcp neetwork settings, it is not
possible to change the leasetime of a range or a host entry. This is
available using dnsmasq extra options, but they are associated with
dhcp-range or dhcp-hosts fields. This patch implements a leasetime for
range and hosts tags. They can be defined under that settings:
<dhcp>
<range ...>
<lease/>
</range>
<host ...>
<lease/>
</host>
</dhcp>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=913446
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new test to check the 'mode' attribute of the passthrough element
and augment an existing, related test to check enablement of the
passthrough element only.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the appropriate entries into the schema to allow encryption of the
backup or scratch image. Since we use blockdev internals for everything
no changes to the code are actually necessary.
https://bugzilla.redhat.com/show_bug.cgi?id=1811906
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to format even the secure information in tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If a pcie-root-port or pcie-downstream-port has hotplug='off' in its
<target> subelement, and if the qemu binary supports the hotplug=false
option, then it will be added to the commandline for the pcie
controller. This controller will then not allow any hotplug/unplug of
devices while the guest is running (and the hotplug capability won't
be advertised to the guest OS, so the guest OS also won't present
unplugging of PCI devices as an option).
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
For any PCI controllers other than pcie-downstream-port and
pcie-root-port, of for qemu binaries that don't support the hotplug
commandline option, an error will be logged during validation.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
a <controller type='pci'...> element can now have a "hotplug"
attribute in the <target> subelement. This is intended to control
whether or not the slot(s) of the controller support
hotplugging/unplugging a device:
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
The default value of hotplug is "on".
Since support for configuring such an option is hypervisor-dependent
(and will vary among different types of PCI controllers even on a
single hypervisor), no validation is done in this patch - that
validation will be done in the patch that wires support for the
setting into the hypervisor.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This caps flag is set when the qemu binary supports the option
"hotplug" for pcie-root-port, ioh3420 (Intel pcie-root-port) and
xio3130-downstream (Intel pcie-downstream-port). If it's available,
it's possible to disable hotplugging/unplugging devices on a
particular port by adding ",hotplug=off" to the qemu device
commandline. This option first appears in qemu-5.0.0.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support in the domXML<->native config converter for max_event_channels.
The parser and formater functions for max_grant_frames were reworked to
also parse max_event_channels. In doing so the xenbus controller is added
earlier in the config parsing, requiring a small adjustment to one of the
existing tests. Include a new test for the event channel conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for setting event_channels in libxl domain config object and
include a test to check that it is properly converted from XML to libxl
domain config.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The signatures of these two CPU model differ only in stepping as both
report family 6 and model 85. Skylake-Server uses stepping 4 or less and
Cascadelake-Server uses stepping 5..7.
https://bugzilla.redhat.com/show_bug.cgi?id=1761678
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Skylake-Server with family 6, model 85, stepping 4, which is currently
mis-detected as Cascadelake-Server CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass the packed option on the QEMU command line of the capability for
packed virtqueues is detected and the parameter is set explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add the capability for QEMU's packed virtqueues for virtio that supposedly have
better cache utilization and performance compared to the default split queues.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Update s390x capabilities for QEMU 4.2 with the actual GA version for
QEMU and on the latest z15 machine.
This picks up the new blockdev capability, so we need to refresh a bunch
of test cases as well.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The virDomainGenerateMachineName() function doesn't belong in
src/conf/ really, because it has nothing to do with domain XML
parsing. It landed there because of lack of better place in the
past. But now that we have src/hypervisor/ the function should
live there. At the same time, the function name is changed to
match new location.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Initially introduced in v3.10.0-rc1~172.
When generating a path for memory-backend-file or -mem-path, qemu
driver will use the following pattern:
$memoryBackingDir/libvirt/qemu/$id-$shortName
where $memoryBackingDir defaults to /var/lib/libvirt/qemu/ram but
can be overridden in qemu.conf. Anyway, the "/libvirt/qemu/" part
looks redundant, because it's already contained in the default,
or creates unnecessary nesting if overridden in qemu.conf.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The virQEMUDriverConfigNew() accepts path to root directory for
embed mode as an argument. If the argument is not NULL it uses
the passed value as prefix for some internal paths (e.g.
cfg->libDir). If it is NULL though, it looks if the other
argument, @privileged is true or false and generates internal
paths accordingly. But when calling the function from the test
suite, instead of passing NULL for @root, an empty string is
passed. Fortunately, this doesn't create a problem because in
both problematic cases the generated paths are "fixed" to point
somewhere into build dir or the code which is tested doesn't
access them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce new 'multidevs' option for filesystem.
<filesystem type='mount' accessmode='mapped' multidevs='remap'>
<source dir='/path'/>
<target dir='mount_tag'>
</filesystem>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU 9pfs 'multidevs' option exists since QEMU 4.2. Probe QEMU's
command line set though to check whether this option is really
available, and if yes enable this new QEMU_CAPS_FSDEV_MULTIDEVS
capability on libvirt side.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function will remain public due to its usage in qemublocktest.c
even after moving qemuDomainDeviceDefValidate(). The position of its
header in qemu_validate.h is no accident.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that v5.0.0-rc1 was tagged, update the capabilities to make sure
that everything works as expected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU now formalized the arguments of netdev-add in the schema, so we
must use a real type to pass the schema validation once the schema is
updated.
The 'user' variant doesn't have any other mandatory fields.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Trying to squeeze the validator output into the monitor reply message
doesn't make sense and doesn't work well as it's not well formed JSON:
54) qemuMonitorJSONAddNetdev ... libvirt: error : internal error: cannot parse json { "error": { "desc": "failed to validate arguments of 'netdev_add' against QAPI schema: {
ERROR: variant 'test' for discriminator 'type' not found
", "class": "UnexpectedCommand" } }: lexical error: invalid character inside string.
ev_add' against QAPI schema: { ERROR: variant 'test' for
(right here) ------^
FAILED
Output it to stderr if requested and just note that schema validation
failed in the error message:
54) qemuMonitorJSONAddNetdev ...
failed to validate arguments of 'netdev_add' against QAPI schema
args:
{
"id": "net0",
"type": "test"
}
validator output:
{
ERROR: variant 'test' for discriminator 'type' not found
libvirt: QEMU Driver error : internal error: unable to execute QEMU command 'netdev_add': failed to validate arguments of 'netdev_add' against QAPI schema (to see debug output use VIR_TEST_DEBUG=2)
FAILED
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test name is concatenated from a prefix with the test name, but no
space was added so the output looked wrong.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When moving the formatting of this attributes from -drive
to -device, the QEMU_CAPS_USB_STORAGE_WERROR capability
was used, because usb-storage was the last device to gain
this capability.
However this lead to the assumption that QEMU binaries
without the usb-storage device do not support this,
leading to breakage on s390x with blockdev.
Fixes: bb4f3543bbhttps://bugzilla.redhat.com/show_bug.cgi?id=1819250
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Detect the werror property on SCSI and virtio disks.
But clear it if the QEMU supports usb-storage device without it
also supporting this option for usb-storage.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To demonstrate the move of these attributes from -drive to -device.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For http/https URIs we need to preserve the query part as it may be
important to refer to the image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the storage source has the query part set, format it in the output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new attribute for holding the query part for http(s) disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The quotes are forbidden only inside the value, but the value itself may
be enclosed in quotes. Fix the RNG schema and validator and add a test
case.
https://bugzilla.redhat.com/show_bug.cgi?id=1804750
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Host-model CPU definitions (and domain capabilities) will use the
original CPU models (without noTSX in their name) and explicitly disable
hle and rtm features. This way domains with host-model CPUs will be
migratable even to older versions of libvirt which do not support the
noTSX model variants.
The new models will be advertised in host capabilities and they may
be used explicitly with custom CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
One of the mitigation methods for TAA[1] is to disable TSX
support on the host system. Linux added a mechanism to disable
TSX globally through the kernel command line, and many Linux
distributions now default to tsx=off. This makes existing CPU
models that have HLE and RTM enabled not usable anymore.
Add new versions of all CPU models that have the HLE and RTM
features enabled, that can be used when TSX is disabled in the
host system.
On systems disabling the features without those types defined
in cpu-maps users end up without modern CPU types in the list
of usable CPUs to use in the likes of virsh domcapabilities
or tools higher in the stack like virt-manager.
This adds:
-Cascadelake-Server-noTSX
-Icelake-Client-noTSX
-Icelake-Server-noTSX
-Skylake-Server-noTSX-IBRS
-Skylake-Client-noTSX-IBRS
Introduced in QEMU by commit v4.2.0-rc2-3-g9ab2237f19 (function)
and commit v4.2.0-rc2-4-g02fa60d101 (names)
References:
[1] TAA, TSX asynchronous Abort:
https://software.intel.com/security-software-guidance/insights/deep-dive-intel-transactional-synchronization-extensions-intel-tsx-asynchronous-aborthttps://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1853200
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Message-Id: <20200310104806.2723-2-christian.ehrhardt@canonical.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetFSInfo can
suppress error reports if the function is not supported by the guest
agent.
Since this patch removes the last use of
qemuAgentErrorCommandUnsupported the whole function is deleted as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetTimezone can
suppress error reports if the function is not supported by the guest
agent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetOSInfo can
suppress error reports if the function is not supported by the guest
agent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuAgentCommandFull so that callers of qemuAgentGetUsers can
suppress error reports if the function is not supported by the guest
agent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unfortunately, advisory record locking lose the lock if any fd refering
to the file is closed. There doesn't seem to be a way to preserve the
lock atomically. We could eventually retake the lock if low pidfilefd
is required.
This fixes processes being leaked, as they are not killed in
virPidFileForceCleanupPath() if the lock can be taken. Here also, we may
consider this is not good enough, as a process may leak by simply
closing the pidfilefd.
Fixes commit d146105f1e ("virCommand:
Actually acquire pidfile instead of just writing it")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our virCommand module allows us to set a pidfile for commands we
want to spawn. The caller constructs the string of pidfile path
and then uses virCommandSetPidFile() to tell the module to write
the pidfile once the command is ran. This usually works, but has
two flaws:
1) the child process does not hold the pidfile open & locked.
Therefore, the caller (or anybody else) can't use our fancy
virPidFileForceCleanupPath() function to kill the command
afterwards. Also, for everybody else on the system it's
needlessly harder to check if the pid from the pidfile is still
alive or not.
2) if the caller ever makes a mistake and passes the same pidfile
path for two different commands, the start of the second command
will overwrite the pidfile even though the first command might
still be running.
NOTE that this temporarily renders some command spawning
unusable, specifically those code patterns where both
virCommandSetPidFile() is used together with instructing spawned
command to acquire pidfile itself. Fortunately, there is only one
occurrence of such pattern and it is in
qemuProcessStartManagedPRDaemon(). This is fixed in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
As a part of c799d150d5 I've introduced a test case that
tests whether passing error object between processes works. The
test spawns a child which reports a system error, parent process
then reads the error and compares with expected output. Problem
with this approach is that error message contains stringified
errno which is not portable. FreeBSD has generally different
messages than Linux. Therefore, use g_strerror() to do the errno
to string translation for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our code allows snapshots of NVMe based disks which means we create
overlay file with a 'json:{}' pseudo-uri refering to the NVME device.
Our parser code doesn't handle them though. Add the parser and test it
via the XML->json->XML round-trip and reference data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Format cookies into the backing store string without encryption as they
will not be visible on the command line when formatting a 'target' only
string. In cases when cookies or other options are used we must use the
JSON format rather than pure URI.
Add tests to validate the scenario.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU requires an extra wrapper object where only the "file" member is
populated. This is basically a placeholder for establishing the format
layer. We did the same in qemuDiskSourceGetProps for the old-school
JSON usage with -drive but forgot to adopt this for -blockdev.
https://bugzilla.redhat.com/show_bug.cgi?id=1804617
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemublocktest showed that we don't add the "fat:" prefix for directory
storage when formatting the backing store string. While it's unlikely to
be used it's simple enough to actually implement the support rather than
trying to forbid it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With -blockdev libvirt provides the string which is recorded as
'backing store' property of an image to qemu. Add testing for
qemuBlockGetBackingStoreString which generates these strings as there's
logic which determines which format to use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We had two non-syncrhonized arrays holding the individual data. This was
a lazy way to do it when I was adding new tests recently. Since it's
hard to extend with new data to test refactor the storage of test data
to use a new struct where all per-image data are kept and can be
extended easily.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function was misplaced. Group it together with other helper
functions for testing disk XML to qemu JSON props conversion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic variable clearing and remove the cleanup sections of
testQemuDiskXMLToProps, testQemuDiskXMLToPropsValidateSchema and
testQemuDiskXMLToPropsValidateFile.
testQemuDiskXMLToPropsValidateFileSrcOnly already uses new helpers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Based on the configuration from the only qemuxml2argv test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virHostCPUGetStatsLinux walks through every cpu in /proc/stat until it
finds cpu%cpuNum that matches with the requested cpu.
If none is found it logs the error but it should return -1, instead of 0.
Otherwise virsh nodecpustats --cpu <invalid cpu number> and API bindings
don't fail properly, printing a blank line instead of an error message.
This patch also includes an additional test for virhostcputest to avoid
this regression to happen again in the future.
Fixes: 93af79fba3
Reported-by: Satheesh Rajendran <satheera@in.ibm.com>
Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Using the 'uuid' element for ppc64 NVDIMM memory added in the
previous patch, use it in qemuBuildMemoryDeviceStr() to pass
it over to QEMU.
Another ppc64 restriction is the necessity of a mem->labelsize,
given than ppc64 only support label-area backed NVDIMMs.
Finally, we don't want ppc64 NVDIMMs to align up due to the
high risk of going beyond the end of file with a 256MiB
increment that the user didn't predict. Align it down
instead. If target size is less than the minimum of
256MiB + labelsize, error out since QEMU will error out
if we attempt to round it up to the minimum.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
ppc64 NVDIMM support was implemented in QEMU by commit [1].
The support is similar to what x86 already does, aside from
an extra 'uuid' element.
This patch introduces a new optional 'uuid' element for the
NVDIMM memory model. This element behaves like the 'uuid'
element of the domain definition - if absent, we'll create
a new one, otherwise use the one provided by the XML.
The 'uuid' element is exclusive to pseries guests and are
unavailable for other architectures.
Next patch will use this new element to add NVDIMM support
for ppc64.
[1] ee3a71e366
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update ppc64 capabilities to pick up the new NVDIMM capability
support for ppc64.
Since the ppc64 capabilities weren't updated for some time, the
bulk of the changes here are related to the blockdev support
(see commit c6a9e54ce3 for info) that we are picking up just
now.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The functionality is now provided by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When running a function in a forked child, so far the only thing
we could report is exit status of the child and the error
message. However, it may be beneficial to the caller to know the
actual error that happened in the child.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Mores <pmores@redhat.com>
Validate that we are able to parse back the dotted syntax arrays we were
generating in the pre-blockdev era.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virBitmapNewEmpty can't fail now so we can make it obvious and fix all
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBlockStorageSourceGetFormatRawProps aggregated both formats but
since we now have props specific for either of those formats it's
unwanted to aggregate the code such way. Split out the 'luks' props
formatter into qemuBlockStorageSourceGetFormatLUKSProps.
The wrong separation demonstrates istself on formatting of the 'size'
and 'offset' attributes for the 'luks' driver which does not conform
to the qapi schema.
https://bugzilla.redhat.com/show_bug.cgi?id=1814975
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'luks' driver in qemu is as any other non-raw format driver and thus
doesn't support the properties for 'slice'. Since libvirt considers
luks files to be raw+encryption we need to special case them when
dealing with the slice.
https://bugzilla.redhat.com/show_bug.cgi?id=1814975
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since libvirt handles the luks encryption in a weird special way
(raw+encryption) we should really test that case with slices as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the removal of gnulib, HAVE_SOCKETPAIR is no more defined, making
these two tests effectively skipped.
Use the same strategy used in other generic library bits, i.e. exclude
the socketpair usage on Windows.
Semi-related change in virnetdaemontest.c to make it build: since
virutil.h does not include unistd.h anymore, we need to include it.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It seems like CD-ROMs may have no 'fileName' property specified in case
there is nothing configured as attachment for the drive. Hence, make
sure that virVMXParseDisk() do not consider it mandatory anymore,
considering it an empty block cdrom device. Sadly virVMXParseDisk() is
used also to parse disk and floppies, so make sure that a NULL fileName
is handled in cdrom- and floppy-related paths.
https://bugzilla.redhat.com/show_bug.cgi?id=1808610
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
So far, when using the qemu:///embed driver, management
applications can't chose whether they want to register their
domains in machined or not. While having that option is certainly
desired, it will require more work. What we can do meanwhile is
to generate names that include part of hash of the root
directory. This is to ensure that if two applications using
different roots but the same domain name (and ID) start the
domain no clashing name for machined is generated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Some branches were not covered and thus we didn't catch that the bitmaps
are not re-enabled if nothing is merged into them. Two bitmaps are
necessary to reliably test the case due to hash table ordering.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Use the 'snapshots-synthetic-broken' test data for block-commit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Test handling of more complex cases of merging bitmaps accross
snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add code for testing the two necessary steps of handling bitmaps during
block commit and exercise the code on the test data which we have for
bitmap handling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Set the 'id' field of the backing chain properly so that we can look
up images, and initialize 6 images instead of 10 as we don't use more
currently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Starting a commit job will require disabling bitmaps in the base image
so that they are not dirtied by the commit job. We need to store a list
of the bitmaps so that we can later re-enable them.
Add a field and status XML handling code as well as a test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add sample data files for validating handling of a QEMU guest started
with:
-smp 7,maxcpus=16,sockets=2,dies=2,cores=2,threads=2
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We currently don't model the 'ssh' protocol properties properly and
since it seems impossible for now (agent path passed via environment
variable). To allow libguestfs to work as it used in pre-blockdev era we
must carry the properties over to the command line. For this instance we
just store it internally and format it back.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add testing of the interpretation of the JSON pseudo-protocol backing
store into JSON structs for blockdev. This will be used to test JSON
pseudo-URIs used by libguestfs while actually also validating the output
against the QMP schema. Since libguestfs uses obsolete/undocumented
values the outputs will differ and a benefit is that modern output is
used now.
The example test case covers the fields and values used by libguestfs
when using the https driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test was invoking the JSON formatter with the 'legacy' flag thus
formatting bunch of obsolete JSON blockdev definitions. We also should
test the modern ones. Add a boolean and re-run all the tests in both
cases.
Additionally for any modern invocation we should also validate that the
output conforms to the QAPI schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move lookup of the schema root earlier so that multiple functions
can use it for validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Multiple tests require the schema. Extract the loading into a separate
variable to avoid issues with ownership of the pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
libguestfs abuses a quirk of qemu's parser to accept also other variants
of the 'sslverify' field which would be valid on the command line but
are not documented in the QMP schema.
If we encounter the 'off' string instead of an boolean handle it rather
than erroring out to continue support of pre-blockdev configurations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for parsing the recently added fields from backing file
pseudo-protocol strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass the alias of the secret object holding the cookie data as
'cookie-secret' to qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The http cookies can have potentially sensitive values and thus should
not be leaked into the command line. This means that we'll need to
instantiate a 'secret' object in qemu to pass the value encrypted.
This patch adds infrastructure for storing of the alias in the status
XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow disabling of SSL certificate validation for HTTPS and FTPS drives
in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will implement the support for sslverify, cookies,
readahead, and timeout properties. Add a test file which will collect
the cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some disk backends support configuring the readahead buffer or timeout
for requests. Add the knobs to the XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add possibility to specify one or more cookies for http based disks.
This patch adds the config parser, storage and validation of the
cookies.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow turning off verification of SSL cerificates add a new element
<ssl> to the disk source XML which will allow configuring the validation
process using the 'verify' attribute.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally there was only the secret for authentication so we didn't use
any suffix to tell it apart. With the introduction of encryption we
added a 'luks' suffix for the encryption secrets. Since encryption is
really generic and authentication is not the only secret modify the
aliases for the secrets to better describe what they are used for.
This is possible as we store the disk secrets in the status XML thus
only new machines will use the new secrets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability is based on qemu's support of using blockdev-snapshot to
install backing chain also for images which are in use by a block-copy
job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Update to v4.2.0-2265-g67923a7ea6 to pick up recent addition of
'allow-write-only-overlay' feature of 'blockdev-snapshot' command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The qemuMonitorTestNew() function returns with the monitor object
locked, and expects it to still be locked when qemuMonitorTestFree
is called. The qemuhotplug test, however, explicitly unlocks the
monitor, but then forgets to lock it again. As a result the
qemuMonitorTestFree function is unlocking a mutex it doesn't own.
This bug has existed forever, but since we use normal POSIX mutexes
and don't check the return value of pthread_mutex_lock/unlock we
didn't see the error. It was harmless until the switch to the per
monitor event loop which requires the thread synchronization to
work reliably, whereupon it started crashing.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
According to the linked BZ, machined expects either valid
hostname or valid FQDN (see systemd commit
v239-3092-gd65652f1f2). While in case of multiple dots, a
trailing one doesn't violate FQDN, it does violate the rule in
case of something simple, like "domain.". But it's safe to remove
it in both cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1808499
Fixes: 45464db8ba
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Sync was introduced in [1] to check for ga presence. This
check is racy but in the era before serial events are available
there was not better solution I guess.
In case we have the events the sync function is different. It allows us
to flush stateless ga channel from remnants of previous communications.
But we need to do it only once. Until we get timeout on issued command
channel state is ok.
[1] qemu_agent: Issue guest-sync prior to every command
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a disk has persistent reservations enabled, qemu-pr-helper
might open not only /dev/mapper/control but also individual
targets of the multipath device. We are already querying for them
in CGroups, but now we have to create them in the namespace too.
This was brought up in [1].
1: https://bugzilla.redhat.com/show_bug.cgi?id=1711045#c61
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Lin Ma <LMa@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
This converts the QEMU agent APIs to use the per-VM
event loop, which involves switching from virEvent APIs
to GMainContext / GSource APIs.
A GSocket is used as a convenient way to create a GSource
for a socket, but is not yet used for actual I/O.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This converts the QEMU monitor APIs to use the per-VM
event loop, which involves switching from virEvent APIs
to GMainContext / GSource APIs.
A GSocket is used as a convenient way to create a GSource
for a socket, but is not yet used for actual I/O.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Tests which are using the QEMU monitor / agent need to have an
event thread running a private GMainContext.
There is already a thread running the main libvirt event loop
but this can't be eliminated yet as it is used for more than
just the monitor client I/O.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use g_autoptr for the virCPUDef variables and get rid
of the cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use an autofree'd helper variable to store the socket path
and free it after the function finishes.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 5b8569dd6e
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virCPUDefPtr uses refcounting internally and must be allocated
using virCPUDefNew, otherwise virCPUDefFree would be a no-op.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: fa2404bf4f
Fixes: eee09435ee
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Free the x86_64 schema before overwriting it with s390x schema.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: eee09435ee
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a type is registered, it holds allocated memory until
the program exits.
Add an exception to valgrind.supp to make the output of
make -C tests valgrind
more readable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the following recent change:
commit db72866310
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Jan 14 10:40:52 2020 +0000
util: add API for reading password from the console
the fact that "bufptr" pointer may point to either heap or stack
allocated data was overlooked. As a result, when the strdup was
removed, we ended up returning a pointer to the local stack to
the caller. When the caller referenced this stack pointer they
got out garbage which fairly quickly resulted in a crash.
We need to copy the stack buffer into heap memory in the username
case.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Refactor the cleanup control flow and use g_autofree for 'arch' so that
it's mandated that it's initialized.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new command in the test suite by asserting the capability
and adjusting test data to the correct field names as they changed
compared to 'query-cpus'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Make it obvious that the function always returns a valid pointer and fix
all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We recognize three return values from tests:
* OK -> 0
* SKIP -> EXIT_AM_SKIP
* ERROR -> anything else
Also check for EXIT_AM_SKIP when building a bitmap of failed tests,
otherwise the skipped tests would be printed in the suggested range
of tests that shoud be re-run.
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: cebb468ef5
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Detect the presence of the flag and make it available internally as
QEMU_CAPS_QMP_QUERY_NAMED_BLOCK_NODES_FLAT.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v4.2.0-1858-gdb736e0437 which contains my commit for 'flat'
output of 'query-named-block-nodes'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format the 'vhost-user-fs' device on the QEMU command line.
This device provides shared file system access using the FUSE protocol
carried over virtio.
The actual file server is implemented in an external vhost-user-fs device
backend process.
https://bugzilla.redhat.com/show_bug.cgi?id=1694166
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Start virtiofsd for each <filesystem> device using it.
Pre-create the socket for communication with QEMU and pass it
to virtiofsd.
Note that virtiofsd needs to run as root.
https://bugzilla.redhat.com/show_bug.cgi?id=1694166
Introduced by QEMU commit a43efa34c7d7b628cbf1ec0fe60043e5c91043ea
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Add more elements for tuning the virtiofsd daemon
and the vhost-user-fs device:
<driver type='virtiofs' queue='1024' xattr='on'>
<binary path='/usr/libexec/virtiofsd'>
<cache mode='always'/>
<lock posix='off' flock='off'/>
</binary>
</driver>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Introduce a new 'virtiofs' driver type for filesystem.
<filesystem type='mount' accessmode='passthrough'>
<driver type='virtiofs'/>
<source dir='/path'/>
<target dir='mount_tag'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</filesystem>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit 98fc1ada4cf70af0f1df1a2d7183cf786fc7da05
virtio: add vhost-user-fs base device
Released in QEMU v4.2.0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Some validation check might reject unprivileged drivers in the future.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
The network port XML files were not including any usage of vlan
tags or port options, and one of the files was not even processed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ever since commit c5a00350 the libxl parser invokes the emulator
to probe which device model to use.
Commit b90c4b5 introduced a workaround that used a stable path
which was very likely to result in the answer matching the default.
However the test is still affected by the host state and the binary
gets invoked if present.
Mock the libxlDomainGetEmulatorType function to stop wasting CPU
cycles every time a 'make check' is run on a system with xen installed.
For example xlconfigtest gets faster by 90 %
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: b90c4b5f50
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Take the parts affected by the host state out of DriverConfigNew
and put them into a separate function.
Adjust all the callers to call both functions.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
libxlDriverConfigNew can possibly fail on wrong
firmware values (unlikely) or on failure to create
the log directory (possible if you're debugging
tests with VIR_FILE_ACCESS)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 4a4132b462
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The virutil.h header defines a geteuid() macro for Windows platforms.
This fixes a few missed cases from:
commit b11e8cccdd
Author: Ján Tomko <jtomko@redhat.com>
Date: Sun Feb 16 23:09:15 2020 +0100
Remove virutil.h from all header files
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Include unistd.h in all files that use it, instead
of relying on it being pulled in via virutil.h
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These tests do not use anything from virutil.h
apart from the transitive include.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Historically, this file was a dump for most of our helper
functions and needed almost everywhere.
With the introduction of virfile.h and virstring.h,
and more importantly, virenum.h and the introduction
of GLib, that is no longer true.
Remove its include from C files that don't even use it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This module depends on domain_conf and is used directly by various
hypervisor drivers.
Move it to src/hypervisor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We create some images for testing our code. We've recorded wrong format
of the backing file for one of the images though.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The variable is allocated, but never freed.
==119642== 29 bytes in 1 blocks are definitely lost in loss record 409 of 671
==119642== at 0x483579F: malloc (vg_replace_malloc.c:309)
==119642== by 0x5AB075F: __vasprintf_internal (in /lib64/libc-2.29.so)
==119642== by 0x57C1A28: g_vasprintf (in /usr/lib64/libglib-2.0.so.0.6000.7)
==119642== by 0x579A0CC: g_strdup_vprintf (in /usr/lib64/libglib-2.0.so.0.6000.7)
==119642== by 0x4AE6D58: vir_g_strdup_printf (glibcompat.c:197)
==119642== by 0x136EEE: qemuTestParseCapabilitiesArch (testutilsqemu.c:291)
==119642== by 0x138506: testQemuInfoSetArgs (testutilsqemu.c:763)
==119642== by 0x135FFF: mymain (qemuxml2argvtest.c:3093)
==119642== by 0x13A60E: virTestMain (testutils.c:839)
==119642== by 0x1368C2: main (qemuxml2argvtest.c:3121)
Fixes: 42b3e5b9e4
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are some architectures that support capabilities that others
do not (e.g. s390x supports cpu comparison and baseline via QEMU).
Let's make testQEMUSchemaLoad accept a string to specify the schema
to load based on the specified arch.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch pushes the isolatedPort setting from the <interface> down
all the way to the callers of virNetDevBridgeAddPort(), and sets
BR_ISOLATED on the port (using virNetDevBridgePortSetIsolated()) after
the port has been successfully added to the bridge.
Signed-off-by: Laine Stump <laine@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a very simple thing to parse and format, but needs to be done
in 4 places, so two trivial utility functions have been made that can
be called from all the higher level parser/formatters:
<domain><interface>
<domain><interface><actual> (only in domain status)
<network>
<networkport>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit v5.9.0-400-gaf8e39921a I removed printing model's fallback and
vendor_id attributes when no model is specified. However, vendor_id
makes sense even without a specific CPU model (for host-model CPUs).
https://bugzilla.redhat.com/show_bug.cgi?id=1804549
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch shows a bug in our code: the
<model vendor_id="Libvirt QEMU"/>
element present in the source XML is lost when the parsed CPU definition
is formatted back to XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1804549
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the parsed 'raw' format JSON string has 'offset' or 'size' attributes
parse them as the format slice.
https://bugzilla.redhat.com/show_bug.cgi?id=1791788
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a set of test data to see whether the backing store strings are
formatted reasonably. Note that we don't support direct creation of such
images so those tests are not enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage slice will require a specific node name in cases when the
image format is not raw. Store and format them in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU allows specifying the offset and size into a raw file to expose a
sub-slice of the image to the guest with the raw driver. Libvirt
currently doesn't support it but we can add test case for future
reference.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will use this capability to detect whether the QEMU binary
supports the kvm-no-adjvtime CPU feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our virCommand helper API already has the ability to capture
program output, there's no need to open-code it.
Apart from simplifying the code, the test is marginally faster
due to recent improvements in virCommandMassClose.
Until now, both stderr and stdout were stored in the same buffer.
This change stores stderr separately and expects it to be empty
for all the tests we currently run.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use g_autoptr where possible.
virTestCapsBuildNUMATopology is not converted completely,
because while the VIR_FREE call on cell_cpus is technically
wrong, neither VIR_ALLOC_N nor virBitmapNew can return
an allocation error now so it is effectively dead code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function returns gboolean.
Compare against the FALSE value from GLib.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 2c33532423
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add few cases that prove the second format of "json:" pseudo-URIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When debugging test failures in seven independent test
cases, it might be helpful to only gather the debug output
of the failing cases.
Record the indexes of the tests that fail and print them
in the VIR_TEST_RANGE of the command line that will result
in only those tests being run.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The contents of 'struct dirent' are only valid until the next call to
readdir() or closedir(). It is thus invalid to save a pointer to the
'd_name' field. Somehow this hasn't affected the test suite until
recently when FreeBSD 12 started showing use of uninitialized memory
resulting in test failures.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
