For a root filesystem with type=file or type=block, the LXC
container was forgetting to actually mount it, before doing
the pivot root step.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the lxc controller sets up the devpts instance on
$rootfsdef->src, but this only works if $rootfsdef is using
type=mount. To support type=block or type=file for the root
filesystem, we must use /var/lib/libvirt/lxc/$NAME.devpts
for the temporary devpts mount in the controller
Instead of using /var/lib/libvirt/lxc/$NAME for the FUSE
filesystem, use /var/lib/libvirt/lxc/$NAME.fuse. This allows
room for other temporary mounts in the same directory
Some of the LXC callbacks did not lock the virDomainObjPtr
instance. This caused transient errors like
error: Failed to start domain busy-mount
error: cannot rename file '/var/run/libvirt/lxc/busy-mount.xml.new' as '/var/run/libvirt/lxc/busy-mount.xml': No such file or directory
as 2 threads tried to update the status file concurrently
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainGetRootFilesystem was only returning filesystems
with type=mount. This is bogus - any type of filesystem is
valid as the root, if dst=/.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Noticed that parsing bond interface XML containing the miimon element
fails
<interface type="bond" name="bond0">
...
<bond mode="active-backup">
<miimon freq="100" carrier="netif"/>
...
</bond>
</interface>
This configuration does not contain the optional updelay and downdelay
attributes, but parsing will fail due to returning the result of
virXPathULong (a -1 when the attribute doesn't exist) from
virInterfaceDefParseBond after examining the updelay attribute.
While fixing this bug, cleanup the function to use virXPathInt instead
of virXPathULong, and store the result directly instead of using a tmp
variable. Using virXPathInt actually fixes a potential silent
truncation bug noted by Eric Blake.
Also, there is no cleanup in the error label. Remove the label,
returning failure where failure occurs and success if the end of the
function is reached.
Don't print the pool option name if it's null.
Before:
virsh # vol-name vol
error: failed to get vol 'vol', specifying --(null) might help
error: Storage volume not found: no storage vol with matching path vol
After:
virsh # vol-name vol
error: failed to get vol 'vol'
error: Storage volume not found: no storage vol with matching path vol
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=924571
The 'nodeset' variable was never initialized, causing a later
VIR_FREE(nodeset) to free uninitialized memory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A better way to do this would be to use a configuration file like
[iscsi "target-name"]
user = name
password = pwd
and pass it via -readconfig. This would remove the username and password
from the "ps" output. For now, however, keep this solution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only sheepdog actually required it in the code, and we can use 7000 as the
default---the same value that QEMU uses for the simple "sheepdog:VOLUME"
syntax. With this change, the schema can be fixed to allow no port.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libiscsi provides a userspace iSCSI initiator.
The main advantage over the kernel initiator is that it is very
easy to provide different initiator names for VMs on the same host.
Thus libiscsi supports usage of persistent reservations in the VM,
which otherwise would only be possible with NPIV.
libiscsi uses "iscsi" as the scheme, not "iscsi+tcp". We can change
this in the tests (while remaining backwards-compatible manner, because
QEMU uses TCP as the default transport for both Gluster and NBD).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following four functions have not changed because default arguments
have to come after positional arguments. Changing them will break the
the binding APIs.
migrate(self, dconn, flags, dname, uri, bandwidth):
migrate2(self, dconn, dxml, flags, dname, uri, bandwidth):
migrateToURI(self, duri, flags, dname, bandwidth):
migrateToURI2(self, dconnuri, miguri, dxml, flags, dname, bandwidth):
The 'trang' utility, which is able to transform '.rng' files into
'.rnc' files, reported some errors in our schemas that weren't caught
by the tools we use in the build. I haven't added a test for this,
but the validity can be checked by the following command:
trang -I rng -O rnc domain.rng domain.rnc
There were unescaped minuses in regular expressions and we were
constraining int (which is by default in the range of [-2^31;2^31-1]
to maximum of 2^32. But what we wanted was exactly an unsignedInt.
This patch adds three macros to the virsh source tree that help to
easily check for mutually exclusive parameters.
VSH_EXCLUSIVE_OPTIONS_EXPR has four arguments, two expressions to check
and two names of the parameters to print in the message.
VSH_EXCLUSIVE_OPTIONS is more specific and check the command structure
for the parameters using vshCommandOptBool.
VSH_EXCLUSIVE_OPTIONS_VAR is meant to check boolean variables with the
same name as the parameters.
The addition of emulator pinning APIs didn't think of doing the right
job with python APIs for them. The default generator produced unusable
code for this.
This patch switches to proper code as in the case of domain Vcpu pining.
This change can be classified as a python API-breaker but in the state
the code was before I doubt anyone was able to use it successfully.
Some code mistakenly called virIdentityOnceInit directly
instead of virIdentityInitialize(). This meant that one-time
initializer was run many times with predictably bad results.
The VIR_ERR_NO_SUPPORT error code is reserved for cases where an
API is not implemented in a driver. It definitely should not be
used when an API execution fails due to unsupported operation.
The recent commit moved some of the use of libnuma out of the
driver code, and into src/util/. It did not, however, update
libvirt_util.la to link against libnuma. This caused linkage
failure with virt-aa-helper, since nothing else caused libnuma
to be pulled onto the linker command line.
The fix removes all reference to NUMACTL_LIBS/CFLAGS from the
various modules in src/Makefile.am and just adds them to the
libvirt_util.la module, which everything else depends on.
Technically a build-breaker fix, but wanted to wait for feedback
on this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We should record the new disk src in the shared disk table for
updating disk (CD-ROM or Floppy) API. Fortunately, we only allow
to update the disk source now, otherwise we might also want to
set the unpriv_sgio setting.
For example:
>>> dom.memoryStats()
libvir: QEMU Driver error : Requested operation is not valid:\
domain is not running
There are six such python API functions like so.
The root reason is that generator.py script checks the type of return
value of a python stub function defined in libvirt-api.xml or
libvirt-override-api.xml to see whether to add the raise clause or not
in python wrapper code in libvirt.py.
The type of return value is supposed to be C types.
For those stub functions which return python non-integer data type like
string, list, tuple, dictionary, the existing type in functions varies
from each other which leads problem like this.
Currently, in generator.py, it maintains a buggy whitelist for stub functions
returning a list type. I think it is easy to forget adding new function name
in the whitelist.
This patch makes the value of type consistent with C type "char *"
in libvirt-override-api.xml. For python, any of types could be printed
as string, so I choose "char *" in this case. And the comment in xml
could explain it when adding new function definition.
<function name='virNodeGetCPUStats' file='python'>
...
- <return type='virNodeCPUStats' info='...'/>
+ <return type='char *' info='...'/>
...
</function>
This plumbs in the XML description of iSCSI shares. The next patches
will add support for the libiscsi userspace initiator.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that VCPU number are removed from qemu_monitor_text.c
(commit cc78d7ba), VCPU string checking also should be removed.
Report-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
but libvirt is built with --with-selinux. In this case getpeercon
returns ENOPROTOOPT so don't return an error in that case but simply
don't set seccon.
Clarify that net-create deals with a transient virtual
network whereas net-define defines a persistent virtual
network definition and will create the network (xml)
definition file.
Clarify that net-destroy works with both transient and
persistent virtual networks.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
The storage volume formats supported by the disk storage pool are
missing from the allowed values.
Add partition types.
Signed-off-by: Philipp Hahn <hahn@univention.de>
iSCSI qualified names (iqn) from RFC3721 may contain colons (':'), which
neither matches the absFilePath nor genericName:
$ virsh pool-dumpxml myiscsipool
<pool type='iscsi'>
...
<source>
...
<device path='iqn.2003-01.org.linux-iscsi.phahn-sid93.x8664:sn.8a3daa0d4efd'/>
</source>
...
</pool>
Add IscsiQualifiedName type and allow its use in sourceiscsi.
Signed-off-by: Philipp Hahn <hahn@univention.de>
The virNetSocket & virIdentity classes accidentally got some
conditionals using HAVE_SELINUX instead of WITH_SELINUX.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Intend to reduce the redundant code,use virNumaSetupMemoryPolicy
to replace virLXCControllerSetupNUMAPolicy and
qemuProcessInitNumaMemoryPolicy.
This patch also moves the numa related codes to the
file virnuma.c and virnuma.h
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Allow lxc using the advisory nodeset from querying numad,
this means if user doesn't specify the numa nodes that
the lxc domain should assign to, libvirt will automatically
bind the lxc domain to the advisory nodeset which queried from
numad.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
