Commit Graph

2403 Commits

Author SHA1 Message Date
Daniel P. Berrangé
0b4598b183 src: replace getcwd() with g_get_current_dir()
commandhelper.c is not converted since this is a standalone
program only run on UNIX, so can rely on getcwd().

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:13 +00:00
Daniel P. Berrangé
f5e9bdb87f src: replace clock_gettime()/gettimeofday() with g_get_real_time()
g_get_real_time() returns the time since epoch in microseconds.
It uses gettimeofday() internally while libvirt used clock_gettime
because it is declared async signal safe. In practice gettimeofday
is also async signal safe *provided* the timezone parameter is
NULL. This is indeed the case in g_get_real_time().

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:13 +00:00
Daniel P. Berrangé
f7df985684 src: switch from fnmatch to g_pattern_match_simple
The g_pattern_match function_simple is an acceptably close
approximation of fnmatch for libvirt's needs.

In contrast to fnmatch(), the '/' character can be matched
by the wildcards, there are no '[...]' character ranges and
'*' and '?' can not be escaped to include them literally in
a pattern.

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:13 +00:00
Daniel P. Berrangé
2c33532423 src: switch to use g_setenv/g_unsetenv
Eliminate direct use of normal setenv/unsetenv calls in
favour of GLib's wrapper. This eliminates two gnulib
modules

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:12 +00:00
Julio Faracco
cf44ec5577 virsh: Add a completer for domifaddr --source parameter.
The command `domifaddr` can use three different sources to grab IP
address of a Virtual Machine: lease, agent and arp. This parameter does
not have a completer function to return source options.

Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-01-03 13:35:45 +01:00
Cole Robinson
f854e051b9 Remove phyp driver
The phyp driver was added in 2009 and does not appear to have had any
real feature change since 2011. There's virtually no evidence online
of users actually using it. IMO it's time to kill it.

This was discussed a bit in April 2016:
https://www.redhat.com/archives/libvir-list/2016-April/msg01060.html

Final discussion is here:
https://www.redhat.com/archives/libvir-list/2019-December/msg01162.html

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-12-20 12:25:42 -05:00
Fabiano Fidêncio
bee366a9ca tools: Don't check the output of virGetUserCacheDirectory()
virGetUserCacheDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.

Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-20 09:38:43 +01:00
Fabiano Fidêncio
dd478cc538 tools: Use g_autofree in cmdCd()
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-20 09:38:43 +01:00
John Ferlan
ce7af78e39 virsh: Adjust logic checks in virshUpdateDiskXML
Make it clearer that what we're trying to do is find @source and
@target_node so that the unattentive or code analysis utility
doesn't believe 'source' and 'target' could be found in the same
node element.

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-12-18 17:21:51 -05:00
Ján Tomko
5657608b5e build: warn on a large frame by default
My commit e73889b631
split the -Wframe-larger-than warning setting into
two different variables - STRICT_FRAME_LIMIT_CFLAGS
for the library code and RELAXED_FRAME_LIMIT_CFLAGS
which was needed for tests.

Use the strict limit by default and specify the warning
flag twice for the parts that require a larger stack
frame, relying on the fact that the compiler will pick
up the latter value.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-12-17 14:39:56 +01:00
Michal Privoznik
67010e8749 virsh: Introduce nvme disk to domblklist
This is slightly more complicated because NVMe disk source is not
a simple attribute to <source/> element. The format in which the
PCI address and namespace ID are printed is the same as QEMU
accepts them:

  nvme://XXXX:XX:XX.X/X

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-17 10:04:44 +01:00
Christian Ehrhardt
8ea9e032dd tools: do not loop in libvirt-guests test_connect
These days libvirt is pretty reliable and even remote connections
(not the default for libvirt-guests anyway) either work or fail but are
uncommon to be flaky.

On the other hand users might have disabled the service and while we are
After=libvirtd for ordering we are not Requiring it. Adding that or any
harder dependency might break our ordering. But if people have disabled
libvirt they will do a full retry loop until timeout.

Lets drop the loop to be much faster if a remote is not reachable.

Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1854653

This reverts

  commit 4e7fc8305a
  Author: Michal Prívozník <mprivozn@redhat.com>
  Date:   Fri Feb 21 12:46:08 2014 +0100

    libvirt-guests: Wait for libvirtd to initialize

The race described in that commit no longer exists using systemd as
we now have socket activation. If not using systemd, then it is also
safe if using the libvirtd --daemon flag, since the parent process
won't return to the caller until the child is accepting connections.

Reported-by: Doug Smythies <dsmythies@telus.net>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
2019-12-16 10:10:49 +00:00
Ján Tomko
7318bff551 Remove VIR_STRNDUP usage with checked pointers
Remove the usage where sanity of the length argument is verified
by other conditions not matching the previous patches.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-12-12 14:24:34 +01:00
Ján Tomko
997340588b vsh: remove vshErrorOOM
We abort on allocation errors now so there is no need to
have a function for it.

Replace the only use by return -1, chosen by fair dice roll.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-12-12 14:24:34 +01:00
Daniel P. Berrangé
e8dfddfa21 docs: remove build recipes related to pod2man usage
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-11 14:28:41 +00:00
Daniel P. Berrangé
ab06dd9db3 docs: convert virsh man page from pod to rst
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-11 14:28:41 +00:00
Daniel P. Berrangé
10251eae0e docs: convert virt-admin man page from pod to rst
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-11 14:28:41 +00:00
Daniel P. Berrangé
9aca11ac6a docs: convert virt-login-shell man page from pod to rst
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-11 14:28:41 +00:00
Daniel P. Berrangé
44bd1902f3 docs: convert virt-sanlock-cleanup man page from pod to rst
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-11 14:28:41 +00:00
Daniel P. Berrangé
48a5589b76 docs: convert virt-xml-validate man page from pod to rst
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-11 14:28:41 +00:00
Daniel P. Berrangé
c9ef27dfe8 docs: convert virt-pki-validate man page from pod to rst
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-11 14:28:41 +00:00
Daniel P. Berrangé
9f050677b5 docs: convert virt-host-validate man page from pod to rst
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-11 14:28:41 +00:00
Pavel Hrdina
5d98c513c5 use g_ascii_toupper instead of c_toupper from gnulib
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-10 13:49:24 +01:00
Pavel Hrdina
cc0e7541ad use g_ascii_tolower instead of c_tolower from gnulib
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-10 13:49:24 +01:00
Pavel Hrdina
04d267d347 use g_ascii_isprint instead of c_isprint from gnulib
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-10 13:49:24 +01:00
Pavel Hrdina
bbe0610625 use g_ascii_iscntrl instead of c_iscntrl from gnulib
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-10 13:49:24 +01:00
Pavel Hrdina
c275ea93db use g_ascii_isalnum instead of c_isalnum from gnulib
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-10 13:49:23 +01:00
Peter Krempa
e8ae2ddbb1 doc: Document quirk of getting block job info for a 'backup' blockjob
The stats reported for a blockjob which is member of a domain pull
backup refer to the utilization of the scratch file rather than the
progress of the backup as the progress of the backup depends on the
client. Note this quirk in the docs.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:58 +01:00
Peter Krempa
08b810053a Add 'backup' block job type
A backup job may consist of many backup sub-blockjobs. Add the new
blockjob type and add all type converter strings.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:57 +01:00
Eric Blake
c15b0cd601 backup: Implement virsh support for backup
Introduce virsh commands for performing backup jobs.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:56 +01:00
Peter Krempa
9e408454a8 API: Add domain job operation for backups
Introduce VIR_DOMAIN_JOB_OPERATION_BACKUP into virDomainJobOperation.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:56 +01:00
Peter Krempa
c3e18c13ca virsh: Implement VIR_DOMAIN_JOB_DISK_TEMP_(USED|TOTAL) in cmdDomjobinfo
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:56 +01:00
Jiri Denemark
5c7cd74a52 virsh: Add --tls-destination option for migrate command
This option can be used to override the destination host name used for
TLS verification.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2019-12-09 10:11:58 +01:00
Peter Krempa
b1bf5efdc1 virsh: domjobinfo: Add switch to print raw fields
Introduce --rawstats which prints all statistics fields from the new API
similarly to how the virsh event handler prints them.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-12-03 15:26:53 +01:00
Peter Krempa
7f3534a5bb virsh: domjobinfo: Allow printing stats also for failed and other jobs
Introduce the --anystats flag which does not skip the printing of the
stats if the job was unsuccessful.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-12-03 15:26:53 +01:00
Peter Krempa
2a55bcd8da virsh: domjobinfo: Print also job operation for failed jobs
Printing that a job failed is rather unhelpful. Print at least the
operation which failed.

Achieve this by moving the check whether to print stats later but
replace it with a check which will skip printing of the operation if
there's no job.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-12-03 15:26:53 +01:00
Peter Krempa
7884b40659 virsh: Implement VIR_DOMAIN_JOB_STATS_KEEP_COMPLETED for 'domjobinfo'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-12-03 15:26:53 +01:00
Peter Krempa
54a9d6e51e virsh: domain: Extract the code converting domain job stats to virDomainJobInfo
To simplify the stats printer code we convert the new statistics from
the typed parameter list into the old stats structure.

Extract this code since it takes a lot of space.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-12-03 15:26:53 +01:00
Michal Privoznik
d7dd4e1f89 nss: Don't fail on empty files
Before we rewrote nss plugin so that it doesn't use libvirt's
internal functions it used virLeaseReadCustomLeaseFile() to parse
.status files. After the rewrite it's using read() + yajl_parse()
+ yajl_complete_parse(). There's one catch though,
virLeaseReadCustomLeaseFile() skipped over empty files.

An empty .status file is created when a network is started. This
is because we configure dnsmasq to use our leasehelper. So the
first thing it does it calls it as follows:

  DNSMASQ_INTERFACE=virbr0 /usr/libexec/libvirt_leaseshelper init

which causes the leasehelper to create empty virbr0.status file.
If there is only one libvirt network then that is no problem -
there are no other .status files to parse anyway. But if there
are two or more networks then the first empty .status file causes
whole parsing process and subsequently the whole name lookup
process to fail.

Fixes: v5.7.0-rc1~343

Reported-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-28 15:37:41 +01:00
Pino Toscano
05d28facb5 virsh: limit completion of 'domhostname' to active domains
Getting the hostname of a guest usually requires a in-guest agent,
or generally can be determined only on active domains.

Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-11-22 11:36:51 +01:00
Ján Tomko
af5aa266ed g_mkstemp_full: pass O_RDWR
This flag is not implied by g_mkstemp_full, only by g_mkstemp.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Bjoern Walk <bwalk@linux.ibm.com>
Fixes: 4ac4773040
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2019-11-18 18:49:02 +01:00
Pavel Hrdina
43b01ef2d6 replace use of gnulib snprintf by g_snprintf
Glib implementation follows the ISO C99 standard so it's safe to replace
the gnulib implementation.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2019-11-15 15:07:40 +01:00
Jiri Denemark
7bd41cb62c virsh: Fix typo in the man page
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2019-11-15 09:34:20 +01:00
Jonathon Jongsma
95f5ac9ae5 Add API to change qemu agent response timeout
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.

This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.

One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').

Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds,  this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-11-14 19:10:01 +01:00
Ján Tomko
4ac4773040 Use g_mkstemp_full instead of mkostemp(s)
With g_mkstemp_full, there is no need to distinguish between
mkostemp and mkostemps (no suffix vs. a suffix of a fixed length),
because the GLib function looks for the XXXXXX pattern everywhere
in the string.

Use S_IRUSR | S_IWUSR for the permissions and do not pass O_RDWR
in flags since it's implied.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2019-11-14 19:02:31 +01:00
Daniel Henrique Barboza
10d6290f1c tools: remove unneeded cleanup labels
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-12 17:54:01 +01:00
Michal Privoznik
8eaa708991 Use g_strdup_vprintf() instead of virVasprintf() everywhere
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-12 16:15:59 +01:00
Michal Privoznik
26a137093b tools: Use g_strdup_printf() instead of virAsprintf()
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-12 16:15:59 +01:00
Pavel Hrdina
137f71486c tools: stop distributing generated source files
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:57 +01:00
Peter Krempa
0967708b81 util: buffer: Remove virBufferCheckError
The function now does not return an error so we can drop it fully.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-10-24 19:35:34 +02:00