This is a second attempt at fixing the problem first attempted
in commit 2df8d99; basically undoing the fact that it was
reverted in commit 43cee32f, plus fixing two more issues: the
code in configure.ac has to EXACTLY match virnetdevbridge.c
with regards to declaring in6 types before using if_bridge.h,
and the fact that RHEL 5 has even more conflicts:
In file included from util/virnetdevbridge.c:49:
/usr/include/linux/in6.h:47: error: conflicting types for 'in6addr_any'
/usr/include/netinet/in.h:206: error: previous declaration of 'in6addr_any' was here
/usr/include/linux/in6.h:49: error: conflicting types for 'in6addr_loopback'
/usr/include/netinet/in.h:207: error: previous declaration of 'in6addr_loopback' was here
The rest of this commit message borrows from the original try
of 2df8d99:
A fresh checkout on a RHEL 6 machine with these packages:
kernel-headers-2.6.32-405.el6.x86_64
glibc-2.12-1.128.el6.x86_64
failed to configure with this message:
checking for linux/if_bridge.h... no
configure: error: You must install kernel-headers in order to compile libvirt with QEMU or LXC support
Digging in config.log, we see that the problem is identical to
what we fixed earlier in commit d12c2811:
configure:98831: checking for linux/if_bridge.h
configure:98853: gcc -std=gnu99 -c -g -O2 conftest.c >&5
In file included from /usr/include/linux/if_bridge.h:17,
from conftest.c:559:
/usr/include/linux/in6.h:31: error: redefinition of 'struct in6_addr'
/usr/include/linux/in6.h:48: error: redefinition of 'struct sockaddr_in6'
/usr/include/linux/in6.h:56: error: redefinition of 'struct ipv6_mreq'
configure:98860: $? = 1
I had not hit it earlier because I was using incremental builds,
where config.cache had shielded me from the kernel-headers breakage.
* configure.ac (if_bridge.h): Avoid conflicting type definitions.
* src/util/virnetdevbridge.c (includes): Also sanitize for RHEL 5.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, only one log file is created by the libxl driver, with
all output from libxl for all domains going to this one file.
Create a per-domain log file based on domain name, making sifting
through the logs a bit easier. This required deferring libxl_ctx
allocation until starting the domain, which is fine since the
ctx is not used when the domain is inactive.
Tested-by: Dario Faggioli <dario.faggioli@citrix.com>
The virtlockd daemon supports an /etc/libvirt/virtlockd.conf
config file, but we never installed a default config, nor
created any augeas scripts. This change addresses that omission.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Coverity complained about the usage of the uninitialized cacerts in the
event(s) that "access(certFile, R_OK)" and/or "access(cacertFile, R_OK)"
fail the for loop used to fill in the certs will have indeterminate data
as well as the possibility that both failures would result in the
gnutls_x509_crt_deinit() call having a similar fate.
Initializing cacerts only would resolve the issue; however, it still
would leave the indeterminate action, so rather add a parameter to
the virNetTLSContextLoadCACertListFromFile() to pass the max size rather
then overloading the returned count parameter. If the the call is never
made, then we won't go through the for loops referencing the empty
cacerts
Valgrind defects memory error:
==16759== 1 errors in context 1 of 8:
==16759== Invalid free() / delete / delete[] / realloc()
==16759== at 0x4A074C4: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16759== by 0x83CD329: xdr_string (in /usr/lib64/libc-2.17.so)
==16759== by 0x4D93E4D: xdr_remote_nonnull_string (remote_protocol.c:31)
==16759== by 0x4D94350: xdr_remote_nonnull_domain (remote_protocol.c:58)
==16759== by 0x4D976C8: xdr_remote_domain_create_with_flags_ret (remote_protocol.c:1762)
==16759== by 0x83CC734: xdr_free (in /usr/lib64/libc-2.17.so)
==16759== by 0x4D7F1E0: remoteDomainCreateWithFlags (remote_driver.c:2441)
==16759== by 0x4D4BF17: virDomainCreateWithFlags (libvirt.c:9499)
==16759== by 0x13127A: cmdStart (virsh-domain.c:3376)
==16759== by 0x12BF83: vshCommandRun (virsh.c:1751)
==16759== by 0x126FFB: main (virsh.c:3205)
==16759== Address 0xe1394a0 is not stack'd, malloc'd or (recently) free'd
==16759== 1 errors in context 2 of 8:
==16759== Conditional jump or move depends on uninitialised value(s)
==16759== at 0x4A07477: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16759== by 0x83CD329: xdr_string (in /usr/lib64/libc-2.17.so)
==16759== by 0x4D93E4D: xdr_remote_nonnull_string (remote_protocol.c:31)
==16759== by 0x4D94350: xdr_remote_nonnull_domain (remote_protocol.c:58)
==16759== by 0x4D976C8: xdr_remote_domain_create_with_flags_ret (remote_protocol.c:1762)
==16759== by 0x83CC734: xdr_free (in /usr/lib64/libc-2.17.so)
==16759== by 0x4D7F1E0: remoteDomainCreateWithFlags (remote_driver.c:2441)
==16759== by 0x4D4BF17: virDomainCreateWithFlags (libvirt.c:9499)
==16759== by 0x13127A: cmdStart (virsh-domain.c:3376)
==16759== by 0x12BF83: vshCommandRun (virsh.c:1751)
==16759== by 0x126FFB: main (virsh.c:3205)
==16759== Uninitialised value was created by a stack allocation
==16759== at 0x4D7F120: remoteDomainCreateWithFlags (remote_driver.c:2423)
How to reproduce?
# virsh start <domain> --paused
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=994855
Signed-off-by: Alex Jia <ajia@redhat.com>
If securityfs is available on the host, we should ensure to
mount it read-only in the container. This will avoid systemd
trying to mount it during startup causing SELinux AVCs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Hotplugging a single SCSI device works, but adding additional ones
result in an error from QEMU:
[root@gpok197 ~]# virsh attach-device guest01 blah.xml
Device attached successfully
[root@gpok197 ~]# virsh attach-device guest01 blah2.xml
error: Failed to attach device from blah2.xml
error: internal error unable to execute QEMU command 'device_add': Duplicate ID 'hostdev0' for device
The hostdev ID that is created is always set to zero, regardless
of the contents of the XML. Changing the index in the hotplug case
to a negative one so the next available index is used.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
So that app developers / admins know what access control checks
are performed for each API, this patch extends the API docs
generator to include details of the ACLs for each.
The gendispatch.pl script is extended so that it generates
a simple XML describing ACL rules, eg.
<aclinfo>
...
<api name='virConnectNumOfDomains'>
<check object='connect' perm='search_domains'/>
<filter object='domain' perm='getattr'/>
</api>
<api name='virDomainAttachDeviceFlags'>
<check object='domain' perm='write'/>
<check object='domain' perm='save' flags='!VIR_DOMAIN_AFFECT_CONFIG|VIR_DOMAIN_AFFECT_LIVE'/>
<check object='domain' perm='save' flags='VIR_DOMAIN_AFFECT_CONFIG'/>
</api>
...
</aclinfo>
The newapi.xsl template loads the XML files containing the ACL
rules and generates a short block of HTML for each API describing
the parameter checks and return value filters (if any).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code added to validate CA certificates did not take into
account the possibility that the cacert.pem file can contain
multiple (concatenated) cert data blocks. Extend the code for
loading CA certs to use the gnutls APIs for loading cert lists.
Add test cases to check that multi-level trees of certs will
validate correctly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 3d0e3c1 reintroduced a problem previously squelched in
commit 7e5aa78. Add a syntax check this time around.
util/virutil.c: In function 'virGetGroupList':
util/virutil.c:1015: error: 'for' loop initial declaration used outside C99 mode
* cfg.mk (sc_prohibit_loop_var_decl): New rule.
* src/util/virutil.c (virGetGroupList): Fix offender.
Signed-off-by: Eric Blake <eblake@redhat.com>
Before, missing attributes were only OK when adding entries;
modification and deletion required all of them.
Now, only deletion works with missing attributes, as long as
the host is uniquely identified.
Go through disks of guest, if one disk doesn't exist or its backing
chain is broken, with 'optional' startupPolicy, for CDROM and Floppy
we only discard its source path definition in xml, for disks we drop
it from disk list and free it.
Since iptables version 1.4.16 '-m state --state NEW' is converted to
'-m conntrack --ctstate NEW'. Therefore, when encountering this or later
versions of iptables use '-m conntrack --ctstate'.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The change from initgroups to virGetGroupList/setgroups in
cab36cfe71ba83b71e536ba5c98e596f02b697b0 dropped the primary group from
processes group list iff the passed in group to virGetGroupList differs
from the user's primary group.
So always include the primary group to bring back the old behaviour.
Debian has the kvm group as primary group but uses
libvirt-qemu:libvirt-qemu as user:group to run the kvm process so
without this change the /dev/kvm is inaccessible.
Since commit 95e18efd most public interfaces (xenUnified...) obtain
a virDomainDefPtr via xenGetDomainDefFor...() which take the unified
lock.
This is already taken before calling xenDomainUsedCpus(), so we get
a deadlock for active guests. Avoid this by splitting up
xenUnifiedDomainGetVcpusFlags() and xenUnifiedDomainGetVcpus() into
public and private function calls (which get the virDomainDefPtr passed)
and use those in xenDomainUsedCpus().
xenDomainUsedCpus
...
nb_vcpu = xenUnifiedDomainGetMaxVcpus(dom);
return xenUnifiedDomainGetVcpusFlags(...)
...
if (!(def = xenGetDomainDefForDom(dom)))
return xenGetDomainDefForUUID(dom->conn, dom->uuid);
...
ret = xenHypervisorLookupDomainByUUID(conn, uuid);
...
xenUnifiedLock(priv);
name = xenStoreDomainGetName(conn, id);
xenUnifiedUnlock(priv);
...
if ((ncpus = xenUnifiedDomainGetVcpus(dom, cpuinfo, nb_vcpu,
...
if (!(def = xenGetDomainDefForDom(dom)))
[again like above]
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This patch addresses two concerns with the error reporting when an
incompatible PCI address is specified for a device:
1) It wasn't always apparent which device had the problem. With this
patch applied, any error about an incompatible address will always
contain the full address as given in the config, so it will be easier
to determine which device's config aused the problem.
2) In some cases when the problem came from bad config, the error
message was erroneously classified as VIR_ERR_INTERNAL_ERROR. With
this patch applied, the same error message will be changed to indicate
either "internal" or "xml" error depending on whether the address came
from the config, or was automatically generated by libvirt.
Note that in the case of "internal" (due to bad auto-generation)
errors, the PCI address won't be of much use in finding the location
in config to change (because it was automatically generated). Of
course that makes perfect sense, but still the address could provide a
clue about a bug in libvirt attempting to use a type of pci bus that
doesn't have its flags set correctly (or something similar). In other
words, it's not perfect, but it is definitely better.
q35 machines have an implicit ahci (sata) controller at 00:1F.2 which
has no "id" associated with it. For this reason, we can't refer to it
as "ahci0". Instead, we don't give an id on the commandline, which
qemu interprets as "use the first ahci controller". We then need to
specify the unit with "unit=%d" rather than adding it onto the bus
arg.
https://bugzilla.redhat.com/show_bug.cgi?id=979477
Since 1.0.3 we are using the new way to copy non shared storage during
migration (the NBD way). However, whether the new or old way is used is
not controllable by user but unconditionally turned on if both sides of
migration support it. Moreover, the implementation is not complete: the
combination for VIR_MIGRATE_TUNNELLED flag is missing (as we need to
open new port on the destination) in which case we just error out. This
is a deadly combination: not letting users choose their destiny and
erroring out. We should not do that but VIR_WARN and turn the NBD off
instead.
We had been setting the device alias in the devinceinfo for pci
controllers to "pci%u", but then hardcoding "pci.%u" when creating the
device address for other devices using that pci bus. This all worked
just fine until we encountered the built-in "pcie.0" bus (the PCIe
root complex) in Q35 machines.
In order to create the correct commandline for this one case, this
patch:
1) sets the alias for PCI controllers correctly, to "pci.%u" (or
"pcie.%u" for the pcie-root controller)
2) eliminates the hardcoded "pci.%u" for pci controllers when
generatuing device address strings, and instead uses the controller's
alias.
3) plumbs a pointer to the virDomainDef all the way down to
qemuBuildDeviceAddressStr. This was necessary in order to make the
aliase of the controller *used by a device* available (previously
qemuBuildDeviceAddressStr only had the deviceinfo of the device
itself, *not* of the controller it was connecting to). This made for a
larger than desired diff, but at least in the future we won't have to
do it again, since all the information we could possibly ever need for
future enhancements is in the virDomainDef. (right?)
This should be done for *all* controllers, but for now we just do it
in the case of PCI controllers, to reduce the likelyhood of
regression.
This patch adds in special handling for a few devices that need to be
treated differently for q35 domains:
usb - there is no implicit/default usb controller for the q35
machinetype. This is done because normally the default usb controller
is added to a domain by just adding "-usb" to the qemu commandline,
and it's assumed that this will add a single piix3 usb1 controller at
slot 1 function 2. That's not what happens when the machinetype is
q35, though. Instead, adding -usb to the commandline adds 3 usb
(version 2) controllers to the domain at slot 0x1D.{1,2,7}. Rather
than having
<controller type='usb' index='0'/>
translate into 3 separate devices on the PCI bus, it's cleaner to not
automatically add a default usb device; one can always be added
explicitly if desired. Or we may decide that on q35 machines, 3 usb
controllers will be automatically added when none is given. But for
this initial commit, at least we aren't locking ourselves into
something we later won't want.
video - qemu always initializes the primary video device immediately
after any integrated devices for the machinetype. Unless instructed
otherwise (by using "-device vga..." instead of "-vga" which libvirt
uses in many cases to work around deficiencies and bugs in various
qemu versions) qemu will always pick the first unused slot. In the
case of the "pc" machinetype and its derivatives, this is always slot
2, but on q35 machinetypes, the first free slot is slot 1 (since the
q35's integrated peripheral devices are placed in other slots,
e.g. slot 0x1f). In order to make the PCI address of the video device
predictable, that slot (1 or 2, depending on machinetype) is reserved
even when no video device has been specified.
sata - a q35 machine always has a sata controller implicitly added at
slot 0x1F, function 2. There is no way to avoid this controller, so we
always add it. Note that the xml2xml tests for the pcie-root and q35
cases were changed to use DO_TEST_DIFFERENT() so that we can check for
the sata controller being automatically added. This is especially
important because we can't check for it in the xml2argv output (it has
no effect on that output since it's an implicit device).
ide - q35 has no ide controllers.
isa and smbus controllers - these two are always present in a q35 (at
slot 0x1F functions 0 and 3) but we have no way of modelling them in
our config. We do need to reserve those functions so that the user
doesn't attempt to put anything else there though. (note that the "pc"
machine type also has an ISA controller, which we also ignore).
This PCI controller, named "dmi-to-pci-bridge" in the libvirt config,
and implemented with qemu's "i82801b11-bridge" device, connects to a
PCI Express slot (e.g. one of the slots provided by the pcie-root
controller, aka "pcie.0" on the qemu commandline), and provides 31
*non-hot-pluggable* PCI (*not* PCIe) slots, numbered 1-31.
Any time a machine is defined which has a pcie-root controller
(i.e. any q35-based machinetype), libvirt will automatically add a
dmi-to-pci-bridge controller if one doesn't exist, and also add a
pci-bridge controller. The reasoning here is that any useful domain
will have either an immediate (startup time) or eventual (subsequent
hot-plug) need for a standard PCI slot; since the pcie-root controller
only provides PCIe slots, we need to connect a dmi-to-pci-bridge
controller to it in order to get a non-hot-plug PCI slot that we can
then use to connect a pci-bridge - the slots provided by the
pci-bridge will be both standard PCI and hot-pluggable.
Since pci-bridge devices themselves can not be hot-plugged into a
running system (although you can hot-plug other devices into a
pci-bridge's slots), any new pci-bridge controller that is added can
(and will) be plugged into the dmi-to-pci-bridge as long as it has
empty slots available.
This patch is also changing the qemuxml2xml-pcie test from a "DO_TEST"
to a "DO_DIFFERENT_TEST". This is so that the "before" xml can omit
the automatically added dmi-to-pci-bridge and pci-bridge devices, and
the "after" xml can include it - this way we are testing if libvirt is
properly adding these devices.
This controller is implicit on q35 machinetypes. It provides 31 PCIe
(*not* PCI) slots as controller 0.
Currently there are no devices that can connect to pcie-root, and no
implicit pci controller on a q35 machine, so q35 is still
unusable. For a usable q35 system, we need to add a
"dmi-to-pci-bridge" pci controller, which can connect to pcie-root,
and provides standard pci slots that can be used to connect other
devices.
Previous refactoring of the guest PCI address reservation/allocation
code allowed for slot types other than basic PCI (e.g. PCI express,
non-hotpluggable slots, etc) but would not auto-allocate a slot for a
device that required any type other than a basic hot-pluggable
PCI slot.
This patch refactors the code to be aware of different slot types
during auto-allocation of addresses as well - as long as there is an
empty slot of the required type, it will be found and used.
The piece that *wasn't* added is that we don't auto-create a new PCI
bus when needed for anything except basic PCI devices. This is because
there are multiple different types of controllers that can provide,
for example, a PCI express slot (in addition to the pcie-root
controller, these can also be found on a "root-port" or on a
"downstream-switch-port"). Since we currently don't support any PCIe
devices (except pending support for dmi-to-pci-bridge), we can defer
any decision on what to do about this.
Commit 632180d1 introduced memory corruption in xenDaemonListDefinedDomains
by starting to populate the names array at index -1, causing all sorts
of havoc in libvirtd such as aborts like the following
*** Error in `/usr/sbin/libvirtd': double free or corruption (out): 0x00007fffe00ccf20 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x7abf6)[0x7ffff3fa0bf6]
/lib64/libc.so.6(+0x7b973)[0x7ffff3fa1973]
/lib64/libc.so.6(xdr_array+0xde)[0x7ffff403cbae]
/usr/sbin/libvirtd(+0x50251)[0x5555555a4251]
/lib64/libc.so.6(xdr_free+0x15)[0x7ffff403ccd5]
/usr/lib64/libvirt.so.0(+0x1fad34)[0x7ffff76b1d34]
/usr/lib64/libvirt.so.0(virNetServerProgramDispatch+0x1fc)[0x7ffff76b16f1]
/usr/lib64/libvirt.so.0(+0x1f214a)[0x7ffff76a914a]
/usr/lib64/libvirt.so.0(+0x1f222d)[0x7ffff76a922d]
/usr/lib64/libvirt.so.0(+0xbcc4f)[0x7ffff7573c4f]
/usr/lib64/libvirt.so.0(+0xbc5e5)[0x7ffff75735e5]
/lib64/libpthread.so.0(+0x7e0f)[0x7ffff48f7e0f]
/lib64/libc.so.6(clone+0x6d)[0x7ffff400e7dd]
Fix by initializing ret to 0 and only setting to error on failure path.
This configuration knob lets user to set the length of queue of
connection requests waiting to be accept()-ed by the daemon. IOW, it
just controls the @backlog passed to listen:
int listen(int sockfd, int backlog);
Currently, even if max_client limit is hit, we accept() incoming
connection request, but close it immediately. This has disadvantage of
not using listen() queue. We should accept() only those clients we
know we can serve and let all other wait in the (limited) queue.
* The functions qemuDomainPCIAddressReserveAddr and
qemuDomainPCIAddressReserveSlot were very similar (and should have
been more similar) and were about to get more code added to them which
would create even more duplicated code, so this patch gives
qemuDomainPCIAddressReserveAddr a "reserveEntireSlot" arg, then
replaces the body of qemuDomainPCIAddressReserveSlot with a call to
qemuDomainPCIAddressReserveAddr.
You will notice that addrs->lastaddr was previously set in
qemuDomainPCIAddressReserveAddr (but *not* set in
qemuDomainPCIAddressReserveSlot). For consistency and cleanliness of
code, that bit was removed and put into the one caller of
qemuDomainPCIAddressReserveAddr (there is a similar place where the
caller of qemuDomainPCIAddressReserveSlot sets lastaddr). This does
guarantee identical functionality to pre-patch code, but in practice
isn't really critical, because lastaddr is just keeping track of where
to start when looking for a free slot - if it isn't updated, we will
just start looking on a slot that's already occupied, then skip up to
one that isn't.
* qemuCollectPCIAddress was essentially doing the same thing as
qemuDomainPCIAddressReserveAddr, but with some extra special case
checking at the beginning. The duplicate code has been replaced with
a call to qemuDomainPCIAddressReserveAddr. This required adding a
"fromConfig" boolean, which is only used to change the log error
code from VIR_ERR_INTERNAL_ERROR (when the address was
auto-generated by libvirt) to VIR_ERR_XML_ERROR (when the address is
coming from the config); without this differentiation, it would be
difficult to tell if an error was caused by something wrong in
libvirt's auto-allocate code or just bad config.
* the bit of code in qemuDomainPCIAddressValidate that checks the
connect type flags is going to be used in a couple more places where
we don't need to also check the slot limits (because we're generating
the slot number ourselves), so that has been pulled out into a
separate qemuDomainPCIAddressFlagsCompatible function.
* qemuDomainPCIAddressSetNextAddr
The name of this function was confusing because 1) other functions in
the file that end in "Addr" are only operating on a single function of
one PCI slot, not the entire slot, while functions that do something
with the entire slot end in "Slot", and 2) it didn't contain a verb
describing what it is doing (the "Set" refers to the set that contains
all PCI buses in the system, used to keep track of which slots in
which buses are already reserved for use).
It is now renamed to qemuDomainPCIAddressReserveNextSlot, which more
clearly describes what it is doing. Arguably, it could have been
changed to qemuDomainPCIAddressSetReserveNextSlot, but 1) the word
"set" is confusing in this context because it could be intended as a
verb or as a noun, and 2) most other functions that operate on a
single slot or address within this set are also named
qemuDomainPCIAddress... rather than qemuDomainPCIAddressSet... Only
the Create, Free, and Grow functions for an address set (which modify the
entire set, not just one element) use "Set" in their name.
* qemuPCIAddressAsString, qemuPCIAddressValidate
All the other functions in this set are named
qemuDomainPCIAddressxxxxx, so I renamed these to be consistent.
The parser shouldn't be doing arch-specific things like adding in
implicit controllers to the config. This should instead be done in the
hypervisor's post-parse callback.
This patch removes the auto-add of a usb controller from the domain
parser, and puts it into the qemu driver's post-parse callback (just
as is already done with the auto-add of the pci-root controller). In
the future, any machine/arch that shouldn't have a default usb
controller added should just set addDefaultUSB = false in this
function.
We've recently seen that q35 and ARMV7L domains shouldn't get a default USB
controller, so I've set addDefaultUSB to false for both of those.
If upgrading from a libvirt that is older than 1.0.5, we can
not assume that vm->def->resource is non-NULL. This bogus
assumption caused libvirtd to crash
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The journald code would crash if a NULL was passed for the
filename / funcname in the logging code. This shouldn't
happen in general, but it is better to be safe, since there
have been bugs triggering this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virLibConnError macros in libvirt-lxc.c and
libvirt-qemu.c were passing NULL for the filename.
This causes a crash if the logging code is configured
to use journald.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* Move platform specific things (e.g. firewalling and route
collision checks) into bridge_driver_platform
* Create two platform specific implementations:
- bridge_driver_linux: Linux implementation using iptables,
it's actually the code moved from bridge_driver.c
- bridge_driver_nop: dumb implementation that does nothing
Signed-off-by: Eric Blake <eblake@redhat.com>
*src/util/virstoragefile.c: Add a helper function to get
the first name of missing backing files, if the name is NULL,
it means the diskchain is not broken.
*src/qemu/qemu_domain.c: qemuDiskChainCheckBroken(disk) to
check if its chain is broken
Refactor this function to make it focus on disk presence checking,
including diskchain checking, and not only for CDROM and Floppy.
This change is good for the following patches.
The virDomainDef is allocated by the caller and also used after
calling to xenDaemonCreateXML. So it must not get freed by the
callee.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Make the virCgroupNewMachine method try to use systemd-machined
first. If that fails, then fallback to using the traditional
cgroup setup code path.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When systemd is involved in managing processes, it may start
killing off & tearing down croups associated with the process
while we're still doing virCgroupKillPainfully. We must
explicitly check for ENOENT and treat it as if we had finished
killing processes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Systemd uses a named cgroup mount for tracking processes. Add
it as another type of controller, albeit one which we have to
special case in a number of places. In particular we must
never create/delete directories there, nor add tasks. Essentially
the systemd mount is to be considered read-only for libvirt.
With this change both the virCgroupDetectPlacement and
virCgroupCopyPlacement methods must be invoked. The copy
placement method will copy setup for resource controllers
only. The detect placement method will probe for any
named controllers, or resource controllers not already
setup.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are some interesting escaping rules to consider when dealing
with systemd slice/scope names. Thus it is helpful to have APIs
for formatting names
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Although this isn't apparently needed for the guest agent itself, the
test I will be adding later depends on the newline as a separator of
messages to process.
this patch introduce the console api in libxl driver for both pv and
hvm guest. and import and update the libxlMakeChrdevStr function
which was deleted in commit dfa1e1dd.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
This function is needed for virt-login-shell. Also modify virGirUserDirectory
to use the new function, to simplify the code.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_DOMAIN_PAUSED_GUEST_PANICKED constant is badly named,
leaking the QEMU event name. Elsewhere in the API we use
'CRASHED' rather than 'PANICKED', and the addition of 'GUEST'
is redundant since all events are guest related.
Thus rename it to VIR_DOMAIN_PAUSED_CRASHED, which matches
with VIR_DOMAIN_RUNNING_CRASHED and VIR_DOMAIN_EVENT_CRASHED.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to rename before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_SHUTDOWN_CRASHED state constant does not appear
to be used in the QEMU code anyway. It also doesn't make much
(any) sense, since the 'shutdown' state is a transient state
between 'running' and 'shutoff' and when a guest crashes, it
does not end up in a 'shutdown' state, only 'shutoff'.
It was added in commit 14e7e0ae8d
which post-dates v1.1.0, so is safe to remove before 1.1.1
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The way we were casting small (<32bit) integers was broken
on big endian hosts, causing stack smashing. This was detected
in the test suite either by test failures due to incorrect
results, or by libc/gcc abort'ing with its stack canary
triggered.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Depending on the set of mingw packages installed, it is possible
that other .c files hit the mingw header pollution from the
virdbus.h file.
In file included from ../../src/rpc/virnetserver.c:39:0:
../../src/util/virdbus.h:41:35: error: expected ';', ',' or ')' before 'struct'
const char *interface,
^
* src/util/virdbus.h (virDBusCallMethod): Match .c file change.
Signed-off-by: Eric Blake <eblake@redhat.com>
On platforms without decent group support, the build failed:
Cannot export virGetGroupList: symbol not defined
./.libs/libvirt_security_manager.a(libvirt_security_manager_la-security_dac.o): In function `virSecurityDACPreFork':
/home/eblake/libvirt-tmp/build/src/../../src/security/security_dac.c:248: undefined reference to `virGetGroupList'
collect2: error: ld returned 1 exit status
* src/util/virutil.c (virGetGroupList): Provide dummy implementation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Our recent conversion to make VIR_ALLOC report oom wasn't
tested on mingw:
In file included from ../../src/util/virthread.c:29:0:
../../src/util/virthreadwin32.c: In function 'virCondWait':
../../src/util/virthreadwin32.c:166:81: error: 'VIR_FROM_THIS' undeclared (first use in this function)
if (VIR_REALLOC_N(c->waiters, c->nwaiters + 1) < 0) {
^
* src/util/virthreadwin32.c (VIR_FROM_THIS): Define.
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous patch was incomplete.
CC libvirt_util_la-vircgroup.lo
../../src/util/vircgroup.c:70:12: error: 'virCgroupPartitionEscape' declared 'static' but never defined [-Werror=unused-function]
static int virCgroupPartitionEscape(char **path);
^
* src/util/vircgroup.c (virCgroupPartitionEscape): Move forward
declaration inside conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virCgroupValidateMachineGroup method calls some functions
which are only conditionally compiled, thus it too must be
made conditional. This fixes the build on non-Linux hosts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A VPATH build 'make check' was failing with:
GEN check-driverimpls
Can't open ../../src/../../src/lxc/lxc_monitor_protocol.h: No such file or directory at ../../src/check-driverimpls.pl line 29, <> line 27153.
Can't open ../../src/../../src/lxc/lxc_monitor_protocol.c: No such file or directory at ../../src/check-driverimpls.pl line 29, <> line 27153.
...
GEN check-aclrules
cannot read ../../src/../../src/remote/remote_protocol.x at ../../src/check-aclrules.pl line 128.
because $(srcdir) was being prepended to file names that already
included it.
* src/Makefile.am (check-driverimpls): Don't add srcdir twice.
Signed-off-by: Eric Blake <eblake@redhat.com>
When the legacy Xen driver probes with a NULL URI, and
finds itself running on Xen, it will set conn->uri. A
little bit later though it checks to see if libxl support
exists, and if so declines the driver. This leaves the
conn->uri set to 'xen:///', so if libxl also declines
it, it prevents probing of the QEMU driver.
Once a driver has set the conn->uri, it must *never*
decline an open request. So we must move the libxl
check earlier
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=981094
The commit 0ad9025ef introduce qemu flag QEMU_CAPS_DEVICE_VIDEO_PRIMARY
for using -device VGA, -device cirrus-vga, -device vmware-svga and
-device qxl-vga. In use, for -device qxl-vga, mouse doesn't display
in guest window like the desciption in above bug.
This patch try to use -device for primary video when qemu >=1.6 which
contains the bug fix patch
Otherwise, with new enough gcc compiling at -O2, the build fails with:
../../src/conf/domain_conf.c: In function ‘virDomainDeviceDefPostParse’:
../../src/conf/domain_conf.c:2821:29: error: ‘cnt’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
for (i = 0; i < *cnt; i++) {
^
../../src/conf/domain_conf.c:2795:20: note: ‘cnt’ was declared here
size_t i, *cnt;
^
../../src/conf/domain_conf.c:2794:30: error: ‘arrPtr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
virDomainChrDefPtr **arrPtr;
^
* src/conf/domain_conf.c (virDomainChrGetDomainPtrs): Always
assign into output parameters.
Signed-off-by: Eric Blake <eblake@redhat.com>
By setting the default partition in libvirt_lxc it is not
visible when querying the live XML. Move setting of the
default partition into libvirtd virLXCProcessStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Decrementing it when it was already 0 causes an invalid free
in virNetworkDefUpdateDNSHost if virNetworkDNSHostDefParseXML
fails and virNetworkDNSHostDefClear gets called twice.
virNetworkForwardDefClear left the number untouched even if it
freed all the elements.
If the app has provided a whitelist of controllers to be used,
we skip detecting its mount point. We still, however, fill in
the placement info which later confuses the machine name
validation code. Skip detecting placement if the controller
mount point is not set
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a VM has an 'emulator' child cgroup present, we must
strip off that suffix when detecting the cgroup for a
machine
Rename the virCgroupIsValidMachineGroup method to
virCgroupValidateMachineGroup to make a bit clearer
that this isn't simply a boolean check, it will make
changes to the object.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupIsValidMachine does not need to be called from
outside the cgroups file now, so make it static.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of requiring drivers to use a combination of calls
to virCgroupNewDetect and virCgroupIsValidMachine, combine
the two into virCgroupNewDetectMachine
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Both virStoragePoolFree and virStorageVolFree reset the last error,
which might lead to the cryptic message:
An error occurred, but the cause is unknown
When the volume wasn't found, virStorageVolFree was called with NULL,
leading to an error:
invalid storage volume pointer in virStorageVolFree
This patch changes it to:
Storage volume not found: no storage vol with matching name 'tomato'
Add protection such that the virCgroupRemove and
virCgroupKill* do not do anything to the root cgroup.
Killing all PIDs in the root cgroup does not end well.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of requiring one API call to create a cgroup and
another to add a task to it, introduce a new API
virCgroupNewMachine which does both jobs at once. This
will facilitate the later code to talk to systemd to
achieve this job which is also atomic.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There's a race in lxc driver causing a deadlock. If a domain is
destroyed immediately after started, the deadlock can occur. When domain
is started, the even loop tries to connect to the monitor. If the
connecting succeeds, virLXCProcessMonitorInitNotify() is called with
@mon->client locked. The first thing that callee does, is
virObjectLock(vm). So the order of locking is: 1) @mon->client, 2) @vm.
However, if there's another thread executing virDomainDestroy on the
very same domain, the first thing done here is locking the @vm. Then,
the corresponding libvirt_lxc process is killed and monitor is closed
via calling virLXCMonitorClose(). This callee tries to lock @mon->client
too. So the order is reversed to the first case. This situation results
in deadlock and unresponsive libvirtd (since the eventloop is involved).
The proper solution is to unlock the @vm in virLXCMonitorClose prior
entering virNetClientClose(). See the backtrace as follows:
Thread 25 (Thread 0x7f1b7c9b8700 (LWP 16312)):
0 0x00007f1b80539714 in __lll_lock_wait () from /lib64/libpthread.so.0
1 0x00007f1b8053516c in _L_lock_516 () from /lib64/libpthread.so.0
2 0x00007f1b80534fbb in pthread_mutex_lock () from /lib64/libpthread.so.0
3 0x00007f1b82a637cf in virMutexLock (m=0x7f1b3c0038d0) at util/virthreadpthread.c:85
4 0x00007f1b82a4ccf2 in virObjectLock (anyobj=0x7f1b3c0038c0) at util/virobject.c:320
5 0x00007f1b82b861f6 in virNetClientCloseInternal (client=0x7f1b3c0038c0, reason=3) at rpc/virnetclient.c:696
6 0x00007f1b82b862f5 in virNetClientClose (client=0x7f1b3c0038c0) at rpc/virnetclient.c:721
7 0x00007f1b6ee12500 in virLXCMonitorClose (mon=0x7f1b3c007210) at lxc/lxc_monitor.c:216
8 0x00007f1b6ee129f0 in virLXCProcessCleanup (driver=0x7f1b68100240, vm=0x7f1b680ceb70, reason=VIR_DOMAIN_SHUTOFF_DESTROYED) at lxc/lxc_process.c:174
9 0x00007f1b6ee14106 in virLXCProcessStop (driver=0x7f1b68100240, vm=0x7f1b680ceb70, reason=VIR_DOMAIN_SHUTOFF_DESTROYED) at lxc/lxc_process.c:710
10 0x00007f1b6ee1aa36 in lxcDomainDestroyFlags (dom=0x7f1b5c002560, flags=0) at lxc/lxc_driver.c:1291
11 0x00007f1b6ee1ab1a in lxcDomainDestroy (dom=0x7f1b5c002560) at lxc/lxc_driver.c:1321
12 0x00007f1b82b05be5 in virDomainDestroy (domain=0x7f1b5c002560) at libvirt.c:2303
13 0x00007f1b835a7e85 in remoteDispatchDomainDestroy (server=0x7f1b857419d0, client=0x7f1b8574ae40, msg=0x7f1b8574acf0, rerr=0x7f1b7c9b7c30, args=0x7f1b5c004a50) at remote_dispatch.h:3143
14 0x00007f1b835a7d78 in remoteDispatchDomainDestroyHelper (server=0x7f1b857419d0, client=0x7f1b8574ae40, msg=0x7f1b8574acf0, rerr=0x7f1b7c9b7c30, args=0x7f1b5c004a50, ret=0x7f1b5c0029e0) at remote_dispatch.h:3121
15 0x00007f1b82b93704 in virNetServerProgramDispatchCall (prog=0x7f1b8573af90, server=0x7f1b857419d0, client=0x7f1b8574ae40, msg=0x7f1b8574acf0) at rpc/virnetserverprogram.c:435
16 0x00007f1b82b93263 in virNetServerProgramDispatch (prog=0x7f1b8573af90, server=0x7f1b857419d0, client=0x7f1b8574ae40, msg=0x7f1b8574acf0) at rpc/virnetserverprogram.c:305
17 0x00007f1b82b8c0f6 in virNetServerProcessMsg (srv=0x7f1b857419d0, client=0x7f1b8574ae40, prog=0x7f1b8573af90, msg=0x7f1b8574acf0) at rpc/virnetserver.c:163
18 0x00007f1b82b8c1da in virNetServerHandleJob (jobOpaque=0x7f1b8574dca0, opaque=0x7f1b857419d0) at rpc/virnetserver.c:184
19 0x00007f1b82a64158 in virThreadPoolWorker (opaque=0x7f1b8573cb10) at util/virthreadpool.c:144
20 0x00007f1b82a63ae5 in virThreadHelper (data=0x7f1b8574b9f0) at util/virthreadpthread.c:161
21 0x00007f1b80532f4a in start_thread () from /lib64/libpthread.so.0
22 0x00007f1b7fc4f20d in clone () from /lib64/libc.so.6
Thread 1 (Thread 0x7f1b83546740 (LWP 16297)):
0 0x00007f1b80539714 in __lll_lock_wait () from /lib64/libpthread.so.0
1 0x00007f1b8053516c in _L_lock_516 () from /lib64/libpthread.so.0
2 0x00007f1b80534fbb in pthread_mutex_lock () from /lib64/libpthread.so.0
3 0x00007f1b82a637cf in virMutexLock (m=0x7f1b680ceb80) at util/virthreadpthread.c:85
4 0x00007f1b82a4ccf2 in virObjectLock (anyobj=0x7f1b680ceb70) at util/virobject.c:320
5 0x00007f1b6ee13bd7 in virLXCProcessMonitorInitNotify (mon=0x7f1b3c007210, initpid=4832, vm=0x7f1b680ceb70) at lxc/lxc_process.c:601
6 0x00007f1b6ee11fd3 in virLXCMonitorHandleEventInit (prog=0x7f1b3c001f10, client=0x7f1b3c0038c0, evdata=0x7f1b8574a7d0, opaque=0x7f1b3c007210) at lxc/lxc_monitor.c:109
7 0x00007f1b82b8a196 in virNetClientProgramDispatch (prog=0x7f1b3c001f10, client=0x7f1b3c0038c0, msg=0x7f1b3c003928) at rpc/virnetclientprogram.c:259
8 0x00007f1b82b87030 in virNetClientCallDispatchMessage (client=0x7f1b3c0038c0) at rpc/virnetclient.c:1019
9 0x00007f1b82b876bb in virNetClientCallDispatch (client=0x7f1b3c0038c0) at rpc/virnetclient.c:1140
10 0x00007f1b82b87d41 in virNetClientIOHandleInput (client=0x7f1b3c0038c0) at rpc/virnetclient.c:1312
11 0x00007f1b82b88f51 in virNetClientIncomingEvent (sock=0x7f1b3c0044e0, events=1, opaque=0x7f1b3c0038c0) at rpc/virnetclient.c:1832
12 0x00007f1b82b9e1c8 in virNetSocketEventHandle (watch=3321, fd=54, events=1, opaque=0x7f1b3c0044e0) at rpc/virnetsocket.c:1695
13 0x00007f1b82a272cf in virEventPollDispatchHandles (nfds=21, fds=0x7f1b8574ded0) at util/vireventpoll.c:498
14 0x00007f1b82a27af2 in virEventPollRunOnce () at util/vireventpoll.c:645
15 0x00007f1b82a25a61 in virEventRunDefaultImpl () at util/virevent.c:273
16 0x00007f1b82b8e97e in virNetServerRun (srv=0x7f1b857419d0) at rpc/virnetserver.c:1097
17 0x00007f1b8359db6b in main (argc=2, argv=0x7ffff98dbaa8) at libvirtd.c:1512
The avail_vcpu bitmap has to be allocated before it can be used (using
the maximum allowed value for that). Then for each available VCPU the
bit in the mask has to be set (libxl_bitmap_set takes a bit position
as an argument, not the number of bits to set).
Without this, I would always only get one VCPU for guests created
through libvirt/libxl.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
virCgroupAvailable() implementation calls getmntent_r
without checking if HAVE_GETMNTENT_R is defined, so it fails
to build on platforms without getmntent_r support.
Make virCgroupAvailable() just return false without
HAVE_GETMNTENT_R.
Function qemuOpenFile() haven't had any idea about seclabels applied
to VMs only, so in case the seclabel differed from the "user:group"
from configuration, there might have been issues with opening files.
Make qemuOpenFile() VM-aware, but only optionally, passing NULL
argument means skipping VM seclabel info completely.
However, all current qemuOpenFile() calls look like they should use VM
seclabel info in case there is any, so convert these calls as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=869053
Parsing 'user:group' is useful even outside the DAC security driver,
so expose the most abstract function which has no DAC security driver
bits in itself.
Since PCI bridges, PCIe bridges, PCIe switches, and PCIe root ports
all share the same namespace, they are all defined as controllers of
type='pci' in libvirt (but with a differing model attribute). Each of
these controllers has a certain connection type upstream, allows
certain connection types downstream, and each can either allow a
single downstream connection at slot 0, or connections from slot 1 -
31.
Right now, we only support the pci-root and pci-bridge devices, both
of which only allow PCI devices to connect, and both which have usable
slots 1 - 31. In preparation for adding other types of controllers
that have different capabilities, this patch 1) adds info to the
qemuDomainPCIAddressBus object to indicate the capabilities, 2) sets
those capabilities appropriately for pci-root and pci-bridge devices,
and 3) validates that the controller being connected to is the proper
type when allocating slots or validating that a user-selected slot is
appropriate for a device..
Having this infrastructure in place will make it much easier to add
support for the other PCI controller types.
While it would be possible to do all the necessary checking by just
storing the controller model in the qemyuDomainPCIAddressBus, it
greatly simplifies all the validation code to also keep a "flags",
"minSlot" and "maxSlot" for each - that way we can just check those
attributes rather than requiring a nearly identical switch statement
everywhere we need to validate compatibility.
You may notice many places where the flags are seemingly hard-coded to
QEMU_PCI_CONNECT_HOTPLUGGABLE | QEMU_PCI_CONNECT_TYPE_PCI
This is currently the correct value for all PCI devices, and in the
future will be the default, with small bits of code added to change to
the flags for the few devices which are the exceptions to this rule.
Finally, there are a few places with "FIXME" comments. Note that these
aren't indicating places that are broken according to the currently
supported devices, they are places that will need fixing when support
for new PCI controller models is added.
To assure that there was no regression in the auto-allocation of PCI
addresses or auto-creation of integrated pci-root, ide, and usb
controllers, a new test case (pci-bridge-many-disks) has been added to
both the qemuxml2argv and qemuxml2xml tests. This new test defines a
domain with several dozen virtio disks but no pci-root or
pci-bridges. The .args file of the new test case was created using
libvirt sources from before this patch, and the test still passes
after this patch has been applied.
Although these two enums are named ..._LAST, they really had the value
of ..._SIZE. This patch changes their values so that, e.g.,
QEMU_PCI_ADDRESS_SLOT_LAST really is the slot number of the last slot
on a PCI bus.
The implicit IDE, USB, and video controllers provided by the PIIX3
chipset in the pc-* machinetypes are not present on other
machinetypes, so we shouldn't be doing the special checking for
them. This patch places those validation checks into a separate
function that is only called for machine types that have a PIIX3 chip
(which happens to be the i440fx-based pc-* machine types).
One qemuxml2argv test data file had to be changed - the
pseries-usb-multi test had included a piix3-usb-uhci device, which was
being placed at a specific address, and also had slot 2 auto reserved
for a video device, but the pseries virtual machine doesn't actually
have a PIIX3 chip, so even if there was a piix3-usb-uhci driver for
it, the device wouldn't need to reside at slot 1 function 2. I just
changed the .argv file to have the generic slot info for the two
devices that results when the special PIIX3 code isn't executed.
qemuDomainPCIAddressBus was an array of QEMU_PCI_ADDRESS_SLOT_LAST
uint8_t's, which worked fine as long as every PCI bus was
identical. In the future, some PCI busses will allow connecting PCI
devices, and some will allow PCIe devices; also some will only allow
connection of a single device, while others will allow connecting 31
devices.
In order to keep track of that information for each bus, we need to
turn qemuDomainPCIAddressBus into a struct, for now with just one
member:
uint8_t slots[QEMU_PCI_ADDRESS_SLOT_LAST];
Additional members will come in later patches.
The item in qemuDomainPCIAddresSet that contains the array of
qemuDomainPCIAddressBus is now called "buses" to be more consistent
with the already existing "nbuses" (and with the new "slots" array).
Thanks to a lack of coordination between kernel and glibc folks,
it has been impossible to mix code using <linux/in.h> and
<net/in.h> for some time now (see for example commit c308a9a).
On at least RHEL 6, <linux/if_bridge.h> tries to use the kernel
side, and fails due to our desire to use the glibc side elsewhere:
In file included from /usr/include/linux/if_bridge.h:17,
from util/virnetdevbridge.c:42:
/usr/include/linux/in6.h:31: error: redefinition of ‘struct in6_addr’
/usr/include/linux/in6.h:48: error: redefinition of ‘struct sockaddr_in6’
/usr/include/linux/in6.h:56: error: redefinition of ‘struct ipv6_mreq’
Thankfully, the kernel layout of these structs is ABI-compatible,
they only differ in the type system presented to the C compiler.
While there are other versions of kernel headers that avoid the
problem, it is easier to just work around the issue than to expect
all developers to upgrade to working kernel headers.
* src/util/virnetdevbridge.c (includes): Coerce the kernel version
of in.h to not collide with the normal version.
Signed-off-by: Eric Blake <eblake@redhat.com>
dbus 1.2.24 (on RHEL 6) lacks DBUS_TYPE_UNIX_FD; but as we aren't
trying to pass one of those anyways, we can just drop support for
it in our wrapper. Solves this build error introduced in commit
834c9c94:
CC libvirt_util_la-virdbus.lo
util/virdbus.c:242: error: 'DBUS_TYPE_UNIX_FD' undeclared here (not in a function)
* src/util/virdbus.c (virDBusBasicTypes): Drop support for unix fds.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit id '4421e257' strdup'd devAlias, but didn't free
Running qemuhotplugtest under valgrind resulted in the following:
==7375== 9 bytes in 1 blocks are definitely lost in loss record 11 of 70
==7375== at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==7375== by 0x37C1085D71: strdup (strdup.c:42)
==7375== by 0x4CBBD5F: virStrdup (virstring.c:554)
==7375== by 0x4CFF9CB: virDomainEventDeviceRemovedNew (domain_event.c:1174)
==7375== by 0x427791: qemuDomainRemoveChrDevice (qemu_hotplug.c:2508)
==7375== by 0x42C65D: qemuDomainDetachChrDevice (qemu_hotplug.c:3357)
==7375== by 0x41C94F: testQemuHotplug (qemuhotplugtest.c:115)
==7375== by 0x41D817: virtTestRun (testutils.c:168)
==7375== by 0x41C400: mymain (qemuhotplugtest.c:322)
==7375== by 0x41DF3A: virtTestMain (testutils.c:764)
==7375== by 0x37C1021A04: (below main) (libc-start.c:225)
Commit 'c8695053' resulted in the following:
Coverity error seen in the output:
ERROR: REVERSE_INULL
FUNCTION: lxcProcessAutoDestroy
Due to the 'dom' being checked before 'dom->persistent' since 'dom'
is already dereferenced prior to that.
Currently the LXC driver creates the VM's cgroup prior to
forking, and then libvirt_lxc moves the child process
into the cgroup. This won't work with systemd whose APIs
do the creation of cgroups + attachment of processes atomically.
Fortunately we simply move the entire cgroups setup into
the libvirt_lxc child process. We make it take place before
fork'ing into the background, so by the time virCommandRun
returns in the LXC driver, the cgroup is guaranteed to be
present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the QEMU driver creates the VM's cgroup prior to
forking, and then uses a virCommand hook to move the child
into the cgroup. This won't work with systemd whose APIs
do the creation of cgroups + attachment of processes atomically.
Fortunately we have a handshake taking place between the
QEMU driver and the child process prior to QEMU being exec()d,
which was introduced to allow setup of disk locking. By good
fortune this synchronization point can be used to enable the
QEMU driver to do atomic setup of cgroups removing the use
of the hook script.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupNewDomainDriver and virCgroupNewDriver methods
are obsolete now that we can auto-detect existing cgroup
placement. Delete them to reduce code bloat.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use the new virCgroupNewDetect function to determine cgroup
placement of existing running VMs. This will allow the legacy
cgroups creation APIs to be removed entirely
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virCgroupIsValidMachine API to check whether an auto
detected cgroup is valid for a machine. This lets us
check if a VM has just been placed into some generic
shared cgroup, or worse, the root cgroup
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a virCgroupNewDetect API which is used to initialize a
cgroup object with the placement of an arbitrary process.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If systemd machine does not exist, return -2 instead of -1,
so that applications don't need to repeat the tedious error
checking code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Current code for handling dbus errors only works for errors
received from the remote application itself. We must also
handle errors emitted by the bus itself, for example, when
it fails to spawn the target service.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a privileged field to storageDriverState
Use the privileged value in order to generate a connection which could
be passed to the various storage backend drivers.
In particular, the iSCSI driver will need a connect in order to perform
pool authentication using the 'chap' secrets and the RBD driver utilizes
the connection during pool refresh for pools using 'ceph' secrets.
For now that connection will be to be to qemu driver until a mechanism
is devised to get a connection to just the secret driver without qemu.
Update virStorageBackendRBDOpenRADOSConn() to use the internal API to the
secret driver in order to get the secret value instead of the external
virSecretGetValue() path. Without the flag VIR_SECRET_GET_VALUE_INTERNAL_CALL
there is no way to get the value of private secret.
This also requires ensuring there is a connection which wasn't true for
for the refreshPool() path calls from storageDriverAutostart() prior to
adding support for the connection to a qemu driver. It seems calls to
virSecretLookupByUUIDString() and virSecretLookupByUsage() from the
refreshPool() path would have failed with no way to find the secret - that is
theoretically speaking since the 'conn' was NULL the failure would have been
"failed to find the secret".
Although the XML for CHAP authentication with plain "password"
was introduced long ago, the function was never implemented. This
patch replaces the login/password mechanism by following the
'ceph' (or RBD) model of using a 'username' with a 'secret' which
has the authentication information.
This patch performs the authentication during startPool() processing
of pools with an authType of VIR_STORAGE_POOL_AUTH_CHAP specified
for iSCSI pools.
There are two types of CHAP configurations supported for iSCSI
authentication:
* Initiator Authentication
Forward, one-way; The initiator is authenticated by the target.
* Target Authentication
Reverse, Bi-directional, mutual, two-way; The target is authenticated
by the initiator; This method also requires Initiator Authentication
This only supports the "Initiator Authentication". (I don't have any
enterprise iSCSI env for testing, only have a iSCSI target setup with
tgtd, which doesn't support "Target Authentication").
"Discovery authentication" is not supported by tgt yet too. So this only
setup the session authentication by executing 3 iscsiadm commands, E.g:
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.authmethod" -v "CHAP" --op update
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.username" -v "Jim" --op update
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.password" -v "Jimsecret" --op update
During qemuTranslateDiskSourcePool() execution, if the srcpool has been
defined with authentication information, then for iSCSI pools copy the
authentication and host information to virDomainDiskDef.
Due to a goto statement missed when refactoring in 2771f8b74c
when acquiring of a domain job failed the error path was not taken. This
resulted into a crash afterwards as an extra reference was removed from a
domain object leading to it being freed. An attempt to list the domains
leaded to a crash of the daemon afterwards.
https://bugzilla.redhat.com/show_bug.cgi?id=928672
Commit 834c9c94 introduced virDBusMessageEncode and
virDBusMessageDecode functions, however corresponding stubs
were not added to !WITH_DBUS section, therefore 'make check'
started to fail when compiled w/out dbus support like that:
Expected symbol virDBusMessageDecode is not in ELF library
The translation must be done before both of cgroup and security
setting, otherwise since the disk source is not translated yet,
it might be skipped on cgroup and security setting.
virDomainDiskDefForeachPath is not only used by the security
setting helpers, also used by cgroup setting helpers, so this
is to ignore the volume type disk with mode="direct" for cgroup
setting.
The difference with already supported pool types (dir, fs, block)
is: there are two modes for iscsi pool (or network pools in future),
one can specify it either to use the volume target path (the path
showed up on host) with mode='host', or to use the remote URI qemu
supports (e.g. file=iscsi://example.org:6000/iqn.1992-01.com.example/1)
with mode='direct'.
For 'host' mode, it copies the volume target path into disk->src. For
'direct' mode, the corresponding info in the *one* pool source host def
is copied to disk->hosts[0].
There are two ways to use a iSCSI LUN as disk source for qemu.
* The LUN's path as it shows up on host, e.g.
/dev/disk/by-path/ip-$ip:3260-iscsi-$iqn-fc18:iscsi.iscsi0-lun-1
* The libiscsi URI from the storage pool source element host attribute, e.g.
iscsi://demo.org:6000/iqn.1992-01.com.example/1
For a "volume" type disk, if the specified "pool" is of iscsi
type, we should support to use the LUN in either of above 2 ways.
That's why to introduce a new XML tag "mode" for the disk source
(libvirt should support iscsi pool with libiscsi, but it's another
new feature, which should be done later).
The "mode" can be either of "host" or "direct". Use "host" to indicate
use of the LUN with the path as it shows up on host. Use "direct" to
indicate to use it with the source pool host URI (future patches may support
to use network type libvirt storage too, e.g. Ceph)
This is another cleanup before extracting platform-specific
parts from bridge_driver.
Rename struct network_driver to _virNetworkDriverState and
add appropriate typedefs: virNetworkDriverState and
virNetworkDriverStatePtr.
This will help us to avoid potential problems when moving
this struct to the .h file.
Convert the remaining methods in vircgroup.c to report errors
instead of returning errno values.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virErrorSetErrnoFromLastError and virLastErrorIsSystemErrno
to simplify code which wants to handle system errors in a more
graceful fashion.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To register virtual machines and containers with systemd-machined,
and thus have cgroups auto-created, we need to talk over DBus.
This is somewhat tedious code, so introduce a dedicated function
to isolate the DBus call in one place.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Doing DBus method calls using libdbus.so is tedious in the
extreme. systemd developers came up with a nice high level
API for DBus method calls (sd_bus_call_method). While
systemd doesn't use libdbus.so, their API design can easily
be ported to libdbus.so.
This patch thus introduces methods virDBusCallMethod &
virDBusMessageRead, which are based on the code used for
sd_bus_call_method and sd_bus_message_read. This code in
systemd is under the LGPLv2+, so we're license compatible.
This code is probably pretty unintelligible unless you are
familiar with the DBus type system. So I added some API
docs trying to explain how to use them, as well as test
cases to validate that I didn't screw up the adaptation
from the original systemd code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Until now CPU features inherited from a specified CPU model could only
be overridden with 'disable' policy. With this patch, any explicitly
specified feature always overrides the same feature inherited from a CPU
model regardless on the specified policy.
The CPU in x86-exact-force-Haswell.xml would previously be incompatible
with x86-host-SandyBridge.xml CPU even though x86-host-SandyBridge.xml
provides all features required by x86-exact-force-Haswell.xml.
If no explicit driver is set for an image backed filesystem,
set it to use the loop driver (if raw) or nbd driver (if
non-raw)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A couple of places in LXC setup for filesystems did not do
a "goto cleanup" after reporting errors. While fixing this,
also add in many more debug statements to aid troubleshooting
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The alias for hostdevs of type SCSI can be too long for QEMU if
larger LUNs are encountered. Here's a real life example:
<hostdev mode='subsystem' type='scsi' managed='no'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='19' unit='1088634913'/>
</source>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</hostdev>
this results in a too long drive id, resulting in QEMU yelling
Property 'scsi-generic.drive' can't find value 'drive-hostdev-scsi_host0-0-19-1088634913'
This commit changes the alias back to the default hostdev$(index)
scheme.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
In case libvirtd is asked to unplug a device but the device is actually
unplugged later when libvirtd is not running, we need to detect that and
remove such device when libvirtd starts again and reconnects to running
domains.
Attempts to start a domain with both SELinux and DAC security
modules loaded will deadlock; latent problem introduced in commit
fdb3bde and exposed in commit 29fe5d7. Basically, when recursing
into the security manager for other driver's prefork, we have to
undo the asymmetric lock taken at the manager level.
Reported by Jiri Denemark, with diagnosis help from Dan Berrange.
* src/security/security_stack.c (virSecurityStackPreFork): Undo
extra lock grabbed during recursion.
Signed-off-by: Eric Blake <eblake@redhat.com>
Makefiles are another easy file to enforce line limits.
Mostly straightforward; interesting tricks worth noting:
src/Makefile.am: $(confdir) was already defined, use it in more places
tests/Makefile.am: path_add and VG required some interesting compression
* cfg.mk (sc_prohibit_long_lines): Add another test.
* Makefile.am: Fix offenders.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 75c1256 states that virGetGroupList must not be called
between fork and exec, then commit ee777e99 promptly violated
that for lxc's use of virSecurityManagerSetProcessLabel. Hoist
the supplemental group detection to the time that the security
manager needs to fork. Qemu is safe, as it uses
virSecurityManagerSetChildProcessLabel which in turn uses
virCommand to determine supplemental groups.
This does not fix the fact that virSecurityManagerSetProcessLabel
calls virSecurityDACParseIds calls parseIds which eventually
calls getpwnam_r, which also violates fork/exec async-signal-safe
safety rules, but so far no one has complained of hitting
deadlock in that case.
* src/security/security_dac.c (_virSecurityDACData): Track groups
in private data.
(virSecurityDACPreFork): New function, to set them.
(virSecurityDACClose): Clean up new fields.
(virSecurityDACGetIds): Alter signature.
(virSecurityDACSetSecurityHostdevLabelHelper)
(virSecurityDACSetChardevLabel, virSecurityDACSetProcessLabel)
(virSecurityDACSetChildProcessLabel): Update callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch wants the DAC security manager to be able to safely
get the supplemental group list for a given uid, but at the time
of a fork rather than during initialization so as to pick up on
live changes to the system's group database. This patch adds the
framework, including the possibility of a pre-fork callback
failing.
For now, any driver that implements a prefork callback must be
robust against the possibility of being part of a security stack
where a later element in the chain fails prefork. This means
that drivers cannot do any action that requires a call to postfork
for proper cleanup (no grabbing a mutex, for example). If this
is too prohibitive in the future, we would have to switch to a
transactioning sequence, where each driver has (up to) 3 callbacks:
PreForkPrepare, PreForkCommit, and PreForkAbort, to either clean
up or commit changes made during prepare.
* src/security/security_driver.h (virSecurityDriverPreFork): New
callback.
* src/security/security_manager.h (virSecurityManagerPreFork):
Change signature.
* src/security/security_manager.c (virSecurityManagerPreFork):
Optionally call into driver, and allow returning failure.
* src/security/security_stack.c (virSecurityDriverStack):
Wrap the handler for the stack driver.
* src/qemu/qemu_process.c (qemuProcessStart): Adjust caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
