These two functions are identical, so no sense in having the
duplication. I resisted the temptation to replace calls to
virNetDevMacVLanDelete() with calls to virNetlinkDelLink() just in
case some mythical future platform has macvtap devices that aren't
managed with netlink (or in case we some day need to do more than just
tell the kernel to delete the device).
Investigation of a problem with creating passthrough macvtap devices
(https://bugzilla.redhat.com/show_bug.cgi?id=1185501) has shown that
this slightly more verbose failure message is useful. In particular,
the mac address can be used to determine the domain. You could also
figure this out by looking at preceding messages in a debug log, but
this gets it in a single place.
When compiling without WITH_MACVTAP, we can get:
'unsupported flags (0x1) in function
virNetDevMacVLanCreateWithVPortProfile'
on an attempt to start a domain.
Remove the flag check to reach the more helpful error:
Cannot create macvlan devices on this platform
https://bugzilla.redhat.com/show_bug.cgi?id=1186928
Currently, MAC registration occurs during device creation, which is
early enough that, during live migration, you end up with duplicate
MAC addresses on still-running source and target devices, even though
the target device isn't actually being used yet.
This patch proposes to defer MAC registration until right before
the guest can actually use the device -- In other words, right
before starting guest CPUs.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
Ethernet interfaces in libvirt currently do not support bandwidth setting.
For example, following xml file for an interface will not apply these
settings to corresponding qdiscs.
<interface type="ethernet">
<mac address="02:36:1d:18:2a:e4"/>
<model type="virtio"/>
<script path=""/>
<target dev="tap361d182a-e4"/>
<bandwidth>
<inbound average="984" peak="1024" burst="64"/>
<outbound average="2000" peak="2048" burst="128"/>
</bandwidth>
</interface>
Signed-off-by: Anirban Chakraborty <abchak@juniper.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our style overwhelmingly uses hanging braces (the open brace
hangs at the end of the compound condition, rather than on
its own line), with the primary exception of the top level function
body. Fix the few remaining outliers, before adding a syntax
check in a later patch.
* src/interface/interface_backend_netcf.c (netcfStateReload)
(netcfInterfaceClose, netcf_to_vir_err): Correct use of { in
compound statement.
* src/conf/domain_conf.c (virDomainHostdevDefFormatSubsys)
(virDomainHostdevDefFormatCaps): Likewise.
* src/network/bridge_driver.c (networkAllocateActualDevice):
Likewise.
* src/util/virfile.c (virBuildPathInternal): Likewise.
* src/util/virnetdev.c (virNetDevGetVirtualFunctions): Likewise.
* src/util/virnetdevmacvlan.c
(virNetDevMacVLanVPortProfileCallback): Likewise.
* src/util/virtypedparam.c (virTypedParameterAssign): Likewise.
* src/util/virutil.c (virGetWin32DirectoryRoot)
(virFileWaitForDevices): Likewise.
* src/vbox/vbox_common.c (vboxDumpNetwork): Likewise.
* tests/seclabeltest.c (main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, there is one flag passed in during macvtap creation
(withTap) -- Let's convert this field to an unsigned int flag
field for future expansion.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Otherwise this beautiful error would be overwritten when
the function is called with a really high rate number:
2014-07-28 12:51:47.920+0000: 2304: error : virCommandWait:2399 :
internal error: Child process (/sbin/tc class add dev vnet0 parent 1:
classid 1:1 htb rate 4294968kbps) unexpected exit status 1: Illegal "rate"
Usage: ... qdisc add ... htb [default N] [r2q N]
default minor id of class to which unclassified packets are sent {0}
r2q DRR quantums are computed as rate in Bps/r2q {10}
debug string of 16 numbers each 0-3 {0}
... class add ... htb rate R1 [burst B1] [mpu B] [overhead O]
[prio P] [slot S] [pslot PS]
[ceil R2] [cburst B2] [mtu MTU] [quantum Q]
rate rate allocated to this class (class can still borrow)
burst max bytes burst which can be accumulated during idle period {computed}
mpu minimum packet size used in rate computations
overhead per-packet size overhead used in rate computations
linklay adapting to a linklayer e.g. atm
ceil definite upper class rate (no borrows) {rate}
cburst burst but for ceil {computed}
mtu max packet size we create rate map for {1600}
prio priority of leaf; lowe
https://bugzilla.redhat.com/show_bug.cgi?id=1043735
Commit 1b14c44 broke the build on FreeBSD by changing
the signature of a few functions without updating the
corresponding stubs that are used when WITH_MACVTAP
or WITH_VIRTUALPORT is not defined.
In "src/util/" there are many enumeration (enum) declarations.
Sometimes, it's better using a typedef for variable types,
function types and other usages. Other enumeration will be
changed to typedef's in the future.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that we ditched our custom pthread impl for Win32, we can
use PTHREAD_MUTEX_INITIALIZER for static mutexes. This avoids
the need to use a virOnce one-time global initializer in a
number of places.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/util/vircommand.c: Consistently use commas.
* src/util/virlog.c: Likewise.
* src/util/virnetdevbandwidth.c: Likewise.
* src/util/virnetdevmacvlan.c: Likewise.
* src/util/virnetdevvportprofile.c: Likewise.
* src/util/virnetlink.c: Likewise.
* src/util/virpci.c: Likewise.
* src/util/virsysinfo.c: Likewise.
* src/util/virusb.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently we report a bogus error message when macvlan
creation fails:
error: Failed to start domain migtest
error: operation failed: Unable to create macvlan device
With this removed, we see the real error:
error: Failed to start domain migtest
error: Unable to get index for interface p31p1: No such device
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
The virNetlinkCommand() method takes an 'unsigned char **'
parameter to be filled with the received netlink message.
The callers then immediately cast this to 'struct nlmsghdr',
triggering (bogus) warnings about increasing alignment
requirements
util/virnetdev.c: In function 'virNetDevLinkDump':
util/virnetdev.c:1300:12: warning: cast increases required alignment of target type [-Wcast-align]
resp = (struct nlmsghdr *)*recvbuf;
^
util/virnetdev.c: In function 'virNetDevSetVfConfig':
util/virnetdev.c:1429:12: warning: cast increases required alignment of target type [-Wcast-align]
resp = (struct nlmsghdr *)recvbuf;
Since all callers cast to 'struct nlmsghdr' we can avoid
the warning problem entirely by simply changing the
signature of virNetlinkCommand to return a 'struct nlmsghdr **'
instead of 'unsigned char **'. The way we do the cast inside
virNetlinkCommand does not have any alignment issues.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Format the address using the helper instead of having similar code in
multiple places.
This patch also fixes leak of the MAC address string in
ebtablesRemoveForwardAllowIn() and ebtablesAddForwardAllowIn() in
src/util/virebtables.c
Currently, after we removed the qemu driver lock, it may happen
that two or more threads will start up a machine with macvlan and
race over virNetDevMacVLanCreateWithVPortProfile(). However,
there's a racy section in which we are generating a sequence of
possible device names and detecting if they exits. If we found
one which doesn't we try to create a device with that name.
However, the other thread is doing just the same. Assume it will
succeed and we must therefore fail. If this happens more than 5
times (which in massive parallel startup surely will) we return
-1 without any error reported. This patch is a simple hack to
both of these problems. It introduces a mutex, so only one thread
will enter the section, and if it runs out of possibilities,
error is reported. Moreover, the number of retries is raised to 20.
These classes can borrow unused bandwidth. Basically,
only egress qdsics can have classes, therefore we can
do this kind of traffic shaping only on host's outgoing,
that is domain's incoming traffic.
When failing to create a macvlan interface, make sure the
error message contains the name of the host interface
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
This patch improve all the API in virnetlink.c to support
all kinds of netlink protocols, and make all netlink sockets
be able to join in groups.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
This removes nearly all the per-file error reporting macros
from the code in src/util/. A few custom macros remain for the
case, where the file needs to report errors with a variety of
different codes or parameters
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
Until now, virNetlinkCommand has assumed that the nl_pid in the source
address of outgoing netlink messages should always be the return value
of getpid(). In most cases it actually doesn't matter, but in the case
of communication with lldpad, lldpad saves this info and later uses it
to send netlink messages back to libvirt. A recent patch to fix Bug
816465 changed the order of the universe such that the netlink event
service socket is no longer bound with nl_pid == getpid(), so lldpad
could no longer send unsolicited messages to libvirtd. Adding src_pid
as an argument to virNetlinkCommand() is the first step in notifying
lldpad of the proper address of the netlink event service socket.
Below patch fixes the following coverity findings
Error: OVERRUN_STATIC:
/libvirt/src/qemu/qemu_command.c:152:
overrun-buffer-val: Overrunning static array "net->mac" of size 6 bytes by passing it as an argument to a function which indexes it at byte position 15.
/libvirt/src/util/virnetdevmacvlan.c:948:
access_dbuff_const: Calling "virNetDevMacVLanVPortProfileRegisterCallback" indexes array "macaddress" at byte position 15.
/libvirt/src/util/virnetdevmacvlan.c:773:
access_dbuff_const: Calling "memcpy" indexes array "macaddress" with index "16UL" at byte position 15.
Error: OVERRUN_STATIC:
/libvirt/src/qemu/qemu_migration.c:2744:
overrun-buffer-val: Overrunning static array "net->mac" of size 6 bytes by passing it as an argument to a function which indexes it at byte position 15.
/libvirt/src/util/virnetdevmacvlan.c:773:
access_dbuff_const: Calling "memcpy" indexes array "macaddress" with index "16UL" at byte position 15.
Error: OVERRUN_STATIC:
/libvirt/src/qemu/qemu_driver.c:435:
overrun-buffer-val: Overrunning static array "net->mac" of size 6 bytes by passing it as an argument to a function which indexes it at byte position 15.
/libvirt/src/util/virnetdevmacvlan.c:1036:
access_dbuff_const: Calling "virNetDevMacVLanVPortProfileRegisterCallback" indexes array "macaddress" at byte position 15.
/libvirt/src/util/virnetdevmacvlan.c:773:
access_dbuff_const: Calling "memcpy" indexes array "macaddress" with index "16UL" at byte position 15.
Currently upon a migration a callback is created when a 802.1qbg link
is set to PREASSOCIATE, this should not happen because this is a no-op
on most switches, and does not lead to an ASSOCIATE state. This patch
only creates callbacks when CREATE or RESTORE is requested. Migration
and libvirtd restart scenarios are already handled elsewhere.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
This patch adds a netlink callback when migrating a VEPA enabled
virtual machine. It fixes a Bug where a VM would not request a port
association when it was cleared by lldpad.
This patch requires the latest git version of lldpad to work.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When libvirtd is restarted, also restart the netlink event
message callbacks for existing VEPA connections and send
a message to lldpad for these existing links, so it learns
the new libvirtd pid.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
There are several functions that call virNetlinkCommand, and they all
follow a common pattern, with three exit labels: err_exit (or
cleanup), malformed_resp, and buffer_too_small. All three of these
labels do their own cleanup and have their own return. However, the
malformed_resp label usually frees the same items as the
cleanup/err_exit label, and the buffer_too_small label just doesn't
free recvbuf (because it's known to always be NULL at the time we goto
buffer_too_small.
In order to simplify and standardize the code, I've made the following
changes to all of these functions:
1) err_exit is replaced with the more libvirt-ish "cleanup", which
makes sense because in all cases this code is also executed in the
case of success, so labelling it err_exit may be confusing.
2) rc is initialized to -1, and set to 0 just before the cleanup
label. Any code that currently sets rc = -1 is made to instead goto
cleanup.
3) malformed_resp and buffer_too_small just log their error and goto
cleanup. This gives us a single return path, and a single place to
free up resources.
4) In one instance, rather then logging an error immediately, a char*
msg was pointed to an error string, then goto cleanup (and cleanup
would log an error if msg != NULL). It takes no more lines of code
to just log the message as we encounter it.
This patch should have 0 functional effects.
This patch includes the following changes to virnetdevmacvlan.c and
virnetdevvportprofile.c:
- removes some netlink functions which are now available in
virnetdev.c
- Adds a vf argument to all port profile functions.
For 802.1Qbh devices, the port profile calls can use a vf argument if
passed by the caller. If the vf argument is -1 it will try to derive the vf
if the device passed is a virtual function.
For 802.1Qbg devices, This patch introduces a null check for the device
argument because during port profile assignment on a hostdev, this argument
can be null.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Commit 723d5c (added after the release of 0.9.10) adds a
NetlinkEventClient for each interface sent to
virNetDevMacVLanCreateWithVPortProfile. This should only be done if
the interface actually *has* a virtPortProfile, otherwise the event
handler would be a NOP. The bigger problem is that part of the setup
to create the NetlinkEventClient is to do a memcpy of virtPortProfile
- if it's NULL, this triggers a segv.
This patch just qualifies the code that adds the client - if
virtPortProfile is NULL, it's skipped.
Add de-association handling for 802.1qbg (vepa) via lldpad
netlink messages. Also adds the possibility to perform an
association request without waiting for a confirmation.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
