Some kernels, such as the one used in RHEL-5, have vport_create and
vport_delete operation files in /sys/class/scsi_host/hostN directory
instead of /sys/class/fc_host/hostN. Let's check both paths for
compatibility reasons.
This also removes unnecessary '/' characters from sysfs paths containing
LINUX_SYSFS_FC_HOST_PREFIX.
NodeDeviceCreateXML and NodeDeviceDestroy methods added for NPIV were
using the wrong privateData field for the remote driver. This doesn't
impact KVM, since the remote driver handles everything, thus
privateData == devMonPrivateData. It does impact Xen though, because
the remote driver only handles a subset of methods and thus
privateData != devMonPrivateData.
In case an optional object cannot be found the lookup function is
left early and the cleanup code is not executed.
This pattern occurs in some other functions too.
The current version of the qemu managed save implementation
is subject to a race where the domain shuts down between
the time that we start the command and the time that we
actually try to do the save. Close this race by making
qemuDomainSaveFlags() expect both the driver and the passed-in
vm object to be locked before executing.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When reconnecting to existing VMs, we re-reserved only those PCI
addresses which were explicitly mentioned in domain XML. Since some
addresses are always reserved (e.g., 0:0:0 and 0:0:1), we need to handle
those too.
Also all this should only be done if device flag is supported by qemu.
In this patch I am extending and fixing the nwfilter module's reload support to stop all ongoing threads (for learning IP addresses of interfaces) and rebuild the filtering rules of all interfaces of all VMs when libvirt is started. Now libvirtd rebuilds the filters upon the SIGHUP signal and libvirtd restart.
About the patch: The nwfilter functions require a virConnectPtr. Therefore I am opening a connection in qemudStartup, which later on needs to be closed outside where the driver lock is held since otherwise it ends up in a deadlock due to virConnectClose() trying to lock the driver as well.
I have tested this now for a while with several machines running and needing the IP address learner thread(s). The rebuilding of the firewall rules seems to work fine following libvirtd restart or a SIGHUP. Also the termination of libvirtd worked fine.
floppy0.present defaults to true. Therefore, it needs to be
explicitly set to false when the XML config doesn't specify the
corresponding floppy device.
Also update tests accordingly.
I changed virStorage[Open|Close] to virVIOSDriver[Open|Close] so
the network driver can use it - since the network driver deals
with Open/Close in the same way.
This patch does two things:
* It makes umlConnectTapDevice ask brAddTap for a persistent tap by
passing it a NULL tapfd argument.
* Stops umlConnectTapDevice from immediately dismantling the bridge
it just set up.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
When passing a NULL tapfd argument to brAddTap, we need to close the fd
of the tap device. If we don't, libvirt will keep the fd open
indefinitely and renders the the guest unable to configure its side of
the tap device.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
If umlBuildCommandLineChr fails (e.g. due to an unsupported chardev
type), it returns NULL. umlBuildCommandLine does not check for this and
sets this as an argument on the comand line, effectively ending the
argument list. This patch checks for this case and sets the chardev to
"none".
Signed-off-by: Soren Hansen <soren@linux2go.dk>
When sniffing the network traffic, discard class D and E IP addresses when sniffing traffic. This was a reason why filters were not correctly rebuilt on VMs on the local 192.* network when libvirt was restarted and those VMs did not use a DHCP request to get its IP address.
While testing the SIGHUP handling and reloading of the nwfilter driver, I found that when the filters are rebuilt and mutlipe threads handled the individual interfaces, concurrently running multiple external bash scripts causes strange failures even though the executed ebtables commands are working on different tables for different interfaces. I cannot say for sure where the concurrency problems are caused, but introducing this lock definitely helps.
Since the qemu process is running as qemu:qemu, it can't actually
look at the unix socket in /var/run/libvirt/qemu which is owned by
root and has permission 700. Move the unix socket to
/var/lib/libvirt/qemu, which is already owned by qemu:qemu.
Thanks to Justin Clift for test this out for me.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The problem is that on the source of the migration, libvirtd
is responsible for creating the unix socket over which the data
will flow. Since libvirtd is running as root, this file will
be created as root. When the qemu process running as qemu:qemu
goes to access the unix file to write data to it, it will get
permission denied and fail. Make sure to change the owner
of the unix file to qemu:qemu.
Thanks to Justin Clift for testing this patch out for me.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
This patch fixes a couple of complaints from valgrind when tickling libvirtd with SIGHUP.
The first two files contain fixes for memory leaks. The 3rd one initializes an uninitialized variable. The 4th one is another memory leak.
Basically a followup of the previous patch about balloon desactivation
if desactivated, to not ask for balloon information to qemu as we will
just get an error back.
This can make a huge difference in the time needed for domain
information or list when a machine is loaded, and balloon has been
desactivated in the guests.
* src/qemu/qemu_driver.c: do not get the balloon info if the balloon
suppor is disabled
--dhcp-no-override description from dnsmasq man page:
Disable re-use of the DHCP servername and filename fields as
extra option space. If it can, dnsmasq moves the boot server and
filename information (from dhcp-boot) out of their dedicated
fields into DHCP options. This make extra space available in the
DHCP packet for options but can, rarely, confuse old or broken
clients. This flag forces "simple and safe" behaviour to avoid
problems in such a case.
It seems some virtual network card ROMs are this old/buggy so let's add
--dhcp-no-override as a workaround for them. We don't use extra DHCP
options so this should be safe. The option was added in dnsmasq-2.41,
which becomes the minimum required version.
For parsing try to match by datastore mount path first, if that
fails fallback to /vmfs/volumes/<datastore>/<path> parsing. This
also fixes problems with GSX on Windows. Because GSX on Windows
doesn't use /vmfs/volumes/ style file names.
For formatting use the datastore mount path too, instead of using
/vmfs/volumes/<datastore>/<path> as fixed format.
We add --dhcp-lease-max=xxx argument when network->def->nranges > 0 but
we only allocate space for in the opposite case :-) I guess we are lucky
enough to miscount somewhere else so that we actually allocate more
space than we need since no-one has hit this bug so far.
Introduce esxVMX_Context containing functions pointers to
glue both parts together in a generic way.
Move the ESX specific part to esx_driver.c.
This is a step towards making the VMX code reusable in a
potential VMware Workstation and VMware Player driver.
The balloon device is automatically added to qemu guests if supported,
but it may be useful to desactivate it. The simplest to not change the
existing behaviour is to allow
<memballoon type="none"/>
as an extra option to desactivate it (it is automatically added if the
memballoon construct is missing for the domain).
The following simple patch just adds the extra option and does not
change the default behaviour but avoid creating a balloon device if
type="none" is used.
* docs/schemas/domain.rng: add the extra type attribute value
* src/conf/domain_conf.c src/conf/domain_conf.h: add the extra enum
value
* src/qemu/qemu_conf.c: if enum is NONE, don't activate the device,
i.e. don't pass the args to qemu/kvm
Added a more detailed error message when adding a tap devices fails and
the kernel is missing tun support.
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
Fix the error checking to use the return value from brAddTap() instead
of checking the current errno value which might have been changed by
clean up calls inside of brAddTap().
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
https://bugzilla.redhat.com/622515 - When hot-unplugging CPUs,
libvirt failed to start a guest that had been pinned to CPUs that
were still online.
Tested on a dual-core laptop, where I also discovered that, per
http://www.cyberciti.biz/files/linux-kernel/Documentation/cpu-hotplug.txt,
/sys/devices/system/cpu/cpu0/online does not exist on systems where it
cannot be hot-unplugged.
* src/nodeinfo.c (linuxNodeInfoCPUPopulate): Ignore CPUs that are
currently offline. Detect readdir failure.
(parse_socket): Move guts...
(get_cpu_value): ...to new function, shared with...
(cpu_online): New function.
device_del command is not synchronous for PCI devices, it merely asks
the guest to release the device and returns. If the host wants to use
that device before the guest actually releases it, we are in big
trouble. To avoid this, we already added a loop which waits up to 10
seconds until the device is actually released before we do anything else
with that device. But we only added this loop for managed PCI devices
before we try reattach them back to the host.
However, we need to wait even for non-managed devices. We don't reattach
them automatically, but we still want to prevent the host from using it.
This was revealed thanks to sVirt: when we relabel sysfs files
corresponding to the PCI device before the guest finished releasing the
device, qemu is no longer allowed to access those files and if it wants
(as a result of guest's request) to write anything to them, it just
exits, which kills the guest.
This is not a proper fix and needs some further work both on libvirt and
qemu side in the future.
virDiskNameToIndex has a list of disk name prefixes that it uses in the
process of finding the disk's index. This list is missing "ubd" which
is the disk prefix used for UML domains.
Signed-off-by: Soren Hansen <soren@linux2go.dk>
That way it can be used to verify a numeric address without storing
the details
* src/util/network.c: change virSocketParseAddr to allow a null @addr
parameter
According to <xen-3.4.3/tools/python/xen/xm/create.py:158>
gopts.var('bootargs', val='NAME',
fn=set_value, default=None,
use="Arguments to pass to boot loader")
the "bootloader_args" parameter needs to be translated into "bootargs"
when using "virsh domxml-to-native xen-xm".
The reverse direction (domxml-from-native) is already okay.
This patch fixes domxml-to-native and adds two test files to catch this
problem.
Signed-off-by: Philipp Hahn <hahn@univention.de>
src/phyp/phyp_driver.c:phypListDomainsGeneric was crashing due to a buffer
overflow if any line returned from virRun wasn't <=10 characters.
Since virStrToLong_i recognizes any non-numeric as a terminator (not
just NULL), there actually is no need to copy the number into a
separate string anyway, so this patch eliminates that copy, the fixed
length buffer, and therefore the potential to overflow.
This change also provided the oppurtunity to eliminate the character
counting loop, instead using the return from virStrToLong_i to point
past the end of the number, then simply skip the \n to get to the
next.
Fix the error checking to use the return value from brAddTap() instead
of checking the current errno value which might have been changed by
clean up calls inside of brAddTap().
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
Added a more detailed error message when adding a tap devices fails and
the kernel is missing tun support.
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>
the followup on the boot=on problem, basically it's not needed to
specify it when booting out of IDE devices when using KVM
* src/qemu/qemu_conf.c: do not use boot=on for IDE devices
* tests/qemuxml2argvdata/qemuxml2argv*.args: this changes the output
for 5 of the tests
Patch version revamped by Eric Blake <eblake@redhat.com> of Jiri
Denemark <jdenemar@redhat.com> original patch
When attaching a PCI device which doesn't explicitly set its PCI
address, libvirt allocates the address automatically. The problem is
that when checking which PCI address is unused, we only check for those
with slot number higher than the highest slot number ever used.
Thus attaching/detaching such device several times in a row (31 is the
theoretical limit, less then 30 tries are enough in practise) makes any
further device attachment fail. Furthermore, attaching a device with
predefined PCI address to 0:0:31 immediately forbids attachment of any
PCI device without explicit address.
This patch changes the logic so that we always check all PCI addresses
before we say there is no PCI address available.
Modifications from v1: revert back to remembering the last slot
reserved, but allow wraparound to not be limited by the end.
In this way, slots are still assigned in the same order as
before the patch, rather than filling in the gaps closest to
0 and risking making windows guests mad.
* src/qemu/qemu_conf.c: fix pci reservation code to do a round-robbin
check of all available PCI splot availability before failing.
Don't rely on summary.url anymore, because its value is different
between an esx:// and vpx:// connection. Use host.mountInfo.path
instead.
Don't fallback to lookup by UUID (actually lookup by absolute path)
in esxVI_LookupDatastoreByName when lookup by name fails. Add a
seperate function for this: esxVI_LookupDatastoreByAbsolutePath
Now a vpx:// connection has an explicitly specified host. This
allows to enabled several functions for a vpx:// connection
again, like host UUID, hostname, general node info, max vCPU
count, free memory, migration and defining new domains.
Lookup datacenter, compute resource, resource pool and host
system once and cache them. This simplifies the rest of the
code and reduces overall HTTP(S) traffic a bit.
esx:// and vpx:// can be mixed freely for a migration.
Ensure that migration source and destination refer to the
same vCenter. Also directly encode the resource pool and
host system object IDs into the migration URI in the prepare
function. Then directly build managed object references in
the perform function instead of re-looking up already known
information.
This patch attempts to take advantage of a newly added netfilter
module to correct for a problem with some guest DHCP client
implementations when used in conjunction with a DHCP server run on the
host systems with packet checksum offloading enabled.
The problem is that, when the guest uses a RAW socket to read the DHCP
response packets, the checksum hasn't yet been fixed by the IP stack,
so it is incorrect.
The fix implemented here is to add a rule to the POSTROUTING chain of
the mangle table in iptables that fixes up the checksum for packets on
the virtual network's bridge that are destined for the bootpc port (ie
"dhcpc", ie port 68) port on the guest.
Only very new versions of iptables will have this support (it will be
in the next upstream release), so a failure to add this rule only
results in a warning message. The iptables patch is here:
http://patchwork.ozlabs.org/patch/58525/
A corresponding kernel module patch is also required (the backend of
the iptables patch) and that will be in the next release of the
kernel.
When trying to assign a PCI device to a guest, we have
to check that all bridges upstream of that device support
ACS. That means that we have to find the parent bridge of
the current device, check for ACS, then find the parent bridge
of that device, check for ACS, etc. As it currently stands,
the code to do this iterates through all PCI devices on the
system, looking for a device that has a range of busses that
included the current device's bus.
That check is not restrictive enough, though. Depending on
how we iterated through the list of PCI devices, we could first
find the *topmost* bridge in the system; since it necessarily had
a range of busses including the current device's bus, we
would only ever check the topmost bridge, and not check
any of the intermediate bridges.
Note that this also caused a fairly serious bug in the
secondary bus reset code, where we could erroneously
find and reset the topmost bus instead of the inner bus.
This patch changes pciGetParentDevice() so that it first
checks if a bridge device's secondary bus exactly matches
the bus of the device we are looking for. If it does, we've
found the correct parent bridge and we are done. If it does not,
then we check to see if this bridge device's busses *include* the
bus of the device we care about. If so, we mark this bridge device
as best, and go on. If we later find another bridge device whose
busses include this device, but is more restrictive, then we
free up the previous best and mark the new one as best. This
algorithm ensures that in the normal case we find the direct
parent, but in the case that the parent bridge secondary bus
is not exactly the same as the device, we still find the
correct bridge.
This patch was tested by me on a 4-port NIC with a
bridge without ACS (where assignment failed), a 4-port
NIC with a bridge with ACS (where assignment succeeded),
and a 2-port NIC with no bridges (where assignment
succeeded).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When parsing hostdev, the following message would be emitted:
10:17:19.052: error : virDomainHostdevDefParseXML:3748 : internal error unknown node alias
However, alias is appropriately parsed in
virDomainDeviceInfoParseXML anyway. Disable the error message
in the initial XML parsing loop.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When an openvz domain is defined with virDomainDefineXML,
domain id is set to -1. A call to virDomainGetInfo after
starting the domain would then fail because this invalid
id is passed to openvzGetProcessInfo.
Found by clang. Clang complained that virStorageBackendProbeTarget
could dereference NULL if backingStoreFormat was NULL, but since all
callers passed a valid pointer, I added attributes instead of null
checks.
* src/storage/storage_backend.c
(virStorageBackendQEMUImgBackingFormat): Kill dead store.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise. Skip null checks, by adding attributes.
valgrind was complaining that virUUIDParse was depending on
an uninitialized value. Indeed it was; virSetHostUUIDStr()
didn't initialize the dmiuuid buffer to 0's, meaning that
anything after the string read from /sys was uninitialized.
Clear out the dmiuuid buffer before use, and make sure to
always leave a \0 at the end.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Basically the 'boot=on' boot selection device is something present in
KVM but not in upstream QEmu, as a result if we boot a QEmu domain
without KVM acceleration we must disable boot=on ... even if the front
end kvm binary expose that capability in the help page.
* src/qemu/qemu_conf.c: in qemudBuildCommandLine if -no-kvm
is passed, then deactivate QEMUD_CMD_FLAG_DRIVE_BOOT
ADD_ARG_LIT should only be used for literal arguments,
since it duplicates the memory. Since virBufferContentAndReset
is already allocating memory, we should only use ADD_ARG.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
esxVI_WaitForTaskCompletion can take a UUID to lookup the
corresponding domain and check if the current task for it
is blocked by a question. It calls another function to do
this: esxVI_LookupAndHandleVirtualMachineQuestion looks up
the VirtualMachine and checks for a question. If there is
a question it calls esxVI_HandleVirtualMachineQuestion to
handle it.
If there was no question or it has been answered the call
to esxVI_LookupAndHandleVirtualMachineQuestion returns 0.
If any error occurred during the lookup and answering
process -1 is returned. The problem with this is, that -1
is also returned when there was no error but the question
could not be answered. So esxVI_WaitForTaskCompletion cannot
distinguish between this two situations and reports that a
question is blocking the task even when there was actually
another problem.
This inherent problem didn't surface until vSphere 4.1 when
you try to define a new domain. The driver tries to lookup
the domain that is just in the process of being registered.
There seems to be some kind of race condition and the driver
manages to issue a lookup command before the ESX server was
able to register the domain. This used to work before.
Due to the return value problem described above the driver
reported a false error message in that case.
To solve this esxVI_WaitForTaskCompletion now takes an
additional occurrence parameter that describes whether or
not to expect the domain to be existent. Also add a new
parameter to esxVI_LookupAndHandleVirtualMachineQuestion
that allows to distinguish if the call returned -1 because
of an actual error or because the question could not be
answered.
'./autobuild.sh' with lcov installed discovered that our
coverage support has been bit-rotting for a while. This
restores it back to a successful state, although I have
not yet spent any time looking through the resulting files to
look for low-hanging fruit in the unit test coverage front.
* configure.ac: Clear COMPILER_FLAGS at right place.
* Makefile.am (cov): Newer genhtml no longer likes plain -s.
* m4/compiler-flags.m4 (gl_COMPILER_FLAGS): Don't AC_SUBST
COMPILER_FLAGS; it is a shell variable for use in configure only.
* src/Makefile.am (AM_CFLAGS, AM_LDFLAGS): New variables, to make
it easier to provide global flag additions. Use throughout, to
uniformly apply coverage flags.
* .gitignore: Globally ignore gcov output.
* daemon/.gitignore: Simplify.
* src/.gitignore: Likewise.
* tests/.gitignore: Likewise.
The recent switch to enable -Wlogical-op paid off again.
gcc 4.5.0 (rawhide) is smarter than 4.4.4 (Fedora 13).
* src/xen/xend_internal.c (xenDaemonAttachDeviceFlags)
(xenDaemonUpdateDeviceFlags, xenDaemonDetachDeviceFlags): Use
correct operator.
Signed-off-by: Eric Blake <eblake@redhat.com>
src/lxc/veth.c:150: VIR_DEBUG(_("Failed to delete '%s' (%d)"),
src/lxc/veth.c:188: VIR_DEBUG(_("Failed to disable '%s' (%d)"),
maint.mk: do not mark these strings for translation
* src/lxc/veth.c (vethDelete, vethInterfaceUpOrDown): Don't
translate VIR_DEBUG.
Previously, the functions in src/lxc/veth.c could sometimes return
positive values on failure rather than -1. This made accurate error
reporting difficult, and led to one failure to catch an error in a
calling function.
This patch makes all the functions in veth.c consistently return 0 on
success, and -1 on failure. It also fixes up the callers to the veth.c
functions where necessary.
Note that this patch may be related to the bug:
https://bugzilla.redhat.com/show_bug.cgi?id=607496.
It will not fix the bug, but should unveil what happens.
* po/POTFILES.in - add veth.c, which previously had no translatable strings
* src/lxc/lxc_controller.c
* src/lxc/lxc_container.c
* src/lxc/lxc_driver.c - fixup callers to veth.c, and remove error logs,
as they are now done in veth.c
* src/lxc/veth.c - make all functions consistently return -1 on error.
* src/lxc/veth.h - use ATTRIBUTE_NONNULL to protect against NULL args.
This fixes a leak described in
https://bugzilla.redhat.com/show_bug.cgi?id=590073
xenUnifiedDomainInfoList has a pointer to a list of pointers to
xenUnifiedDomain. We were freeing up all the domains, but neglecting
to free the list.
This was found by Paolo Bonzini <pbonzini@redhat.com>.
If detecting the FLR flag of a pci device fails, then we
could run into the situation of trying to close a file
descriptor twice, once in pciInitDevice() and once in pciFreeDevice().
Fix that by removing the pciCloseConfig() in pciInitDevice() and
just letting pciFreeDevice() handle it.
Thanks to Chris Wright for pointing out this problem.
While we are at it, fix an error check. While it would actually
work as-is (since success returns 0), it's still more clear to
check for < 0 (as the rest of the code does).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
All <console> devices now export a <target> type attribute. QEMU defaults
to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
depending on fullvirt. Understandably there is lots of test fallout.
This will be used to differentiate between a serial vs. virtio console for
QEMU.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
targetType only tracks the actual <target> format we are parsing. Currently
we only fill abide this value for channel devices.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There is actually a difference between the character device type (serial,
parallel, channel, ...) and the target type (virtio, guestfwd). Currently
they are awkwardly conflated.
Start to pull them apart by renaming targetType -> deviceType. This is
an entirely mechanical change.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
During function test of the 802.1Qbg implementation in lldpad we came
across a small problem in the handling of the netlink message
corresponding to PORT_PROFILE_RESPONSE_INPROGRESS. This should not
result in returning the default rc=1.
- src/util/macvtap.c: fix getPortProfileStatus() to return 0 in that
case and also fix an indentation problem
QEMU has had two different syntax for disk cache options
Old: on|off
New: writeback|writethrough|none
QEMU recently added another 'unsafe' option which broke the
libvirt check. We can avoid this & future breakage, if we
do a negative check for the old syntax, instead of a positive
check for the new syntax
* src/qemu/qemu_conf.c: Invert cache option check
Add a new element to the <os> block:
<bootmenu enable="yes|no"/>
Which maps to -boot,menu=on|off on the QEMU command line.
I decided to use an explicit 'enable' attribute rather than just make the
bootmenu element boolean. This allows us to treat lack of a bootmenu element
as 'use hypervisor default'.
Some buggy PCI devices actually support FLR, but
forget to advertise that fact in their PCI config space.
However, Virtual Functions on SR-IOV devices are
*required* to support FLR by the spec, so force has_flr
on if this is a virtual function.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When doing a PCI secondary bus reset, we must be sure that there are no
active devices on the same bus segment. The active device tracking is
designed to only track host devices that are active in use by guests.
This ignores host devices that are actively in use by the host. So the
current logic will reset host devices.
Switch this logic around and allow sbus reset when we are assigning all
devices behind a bridge to the same guest at guest startup or as a result
of a single attach-device command.
* src/util/pci.h: change signature of pciResetDevice to add an
inactive devices list
* src/qemu/qemu_driver.c src/xen/xen_driver.c: use (or not) the new
functionality of pciResetDevice() depending on the place of use
* src/util/pci.c: implement the interface and logic changes
- src/qemu/qemu_driver.c: Eliminate code duplication by using the new
helpers qemuPrepareHostdevPCIDevices and qemuDomainReAttachHostdevDevices.
This reduces the number of open coded calls to pciResetDevice.
- src/qemu/qemu_driver.c: These new helpers take hostdev list and count
directly rather than getting them indirectly from domain definition.
This will allow reuse for the attach-device case.
- src/qemu/qemu_driver.c: Update qemuGetPciHostDeviceList to take a
hostdev list and count directly, rather than getting this indirectly
from domain definition. This will allow reuse for the attach-device case.
Add a pointer to the primary context of a connection and use it in all
driver functions that don't dependent on the context type. This includes
almost all functions that deal with a virDomianPtr. Therefore, using
a vpx:// connection allows you to perform all the usual domain related
actions like start, destroy, suspend, resume, dumpxml etc.
Some functions that require an explicitly specified ESX server don't work
yet. This includes the host UUID, the hostname, the general node info, the
max vCPU count and the free memory. Also not working yet are migration and
defining new domains.
Since 070f61002f the vcenter query
parameter has been ignored, because the refactoring to use
esxUtil_ParseQuery was incomplete. This effectively broke migration,
because the vcenter query parameter is essential for a migration.
Commit 68719c4bdd added the
p option to control disk format probing, but it wasn't added
to the getopt_long optstring parameter.
Add the p option to the getopt_long optstring parameter.
Commit a885334499 added this
function and wrapped vah_add_file in it. vah_add_file may
return -1, 0, 1. It returns 1 in case the call to valid_path
detects a restricted file. The original code treated a return
value != 0 as error. The refactored code treats a return
value < 0 as error. This triggers segfault in virt-aa-helper
and breaks virt-aa-helper-test for the restricted file tests.
Make sure that add_file_path returns -1 on error.
virt-aa-helper used to ignore errors when opening files.
Commit a885334499 refactored
the related code and changed this behavior. virt-aa-helper
didn't ignore open errors anymore and virt-aa-helper-test
fails.
Make sure that virt-aa-helper ignores open errors again.
