<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
  <body>
    <h1>Storage pool and volume XML format</h1>

    <ul id="toc"></ul>

    <h2><a name="StoragePool">Storage pool XML</a></h2>

    <p>
      Although all storage pool backends share the same public APIs and
      XML format, they have varying levels of capabilities. Some may
      allow creation of volumes, others may only allow use of pre-existing
      volumes. Some may have constraints on volume size, or placement.
    </p>
    <p>
      The top level tag for a storage pool document is 'pool'. It has
      a single attribute <code>type</code>, which is one of <code>dir</code>,
      <code>fs</code>, <code>netfs</code>, <code>disk</code>,
      <code>iscsi</code>, <code>logical</code>, <code>scsi</code>
      (all <span class="since">since 0.4.1</span>), <code>mpath</code>
      (<span class="since">since 0.7.1</span>), <code>rbd</code>
      (<span class="since">since 0.9.13</span>), <code>sheepdog</code>
      (<span class="since">since 0.10.0</span>),
      <code>gluster</code> (<span class="since">since
      1.2.0</span>) or <code>zfs</code> (<span class="since">since
      1.2.8</span>). This corresponds to the
      storage backend drivers listed further along in this document.
    </p>
    <h3><a name="StoragePoolFirst">General metadata</a></h3>

    <pre>
      &lt;pool type="iscsi"&gt;
        &lt;name&gt;virtimages&lt;/name&gt;
        &lt;uuid&gt;3e3fce45-4f53-4fa7-bb32-11f34168b82b&lt;/uuid&gt;
        &lt;allocation&gt;10000000&lt;/allocation&gt;
        &lt;capacity&gt;50000000&lt;/capacity&gt;
        &lt;available&gt;40000000&lt;/available&gt;
        ...</pre>

    <dl>
      <dt><code>name</code></dt>
      <dd>Providing a name for the pool which is unique to the host.
        This is mandatory when defining a pool. <span class="since">Since 0.4.1</span></dd>
      <dt><code>uuid</code></dt>
      <dd>Providing an identifier for the pool which is globally unique.
        This is optional when defining a pool, a UUID will be generated if
        omitted. <span class="since">Since 0.4.1</span></dd>
      <dt><code>allocation</code></dt>
      <dd>Providing the total storage allocation for the pool. This may
        be larger than the sum of the allocation of all volumes due to
        metadata overhead. This value is in bytes. This is not applicable
        when creating a pool. <span class="since">Since 0.4.1</span></dd>
      <dt><code>capacity</code></dt>
      <dd>Providing the total storage capacity for the pool. Due to
        underlying device constraints it may not be possible to use the
        full capacity for storage volumes. This value is in bytes. This
        is not applicable when creating a pool. <span class="since">Since 0.4.1</span></dd>
      <dt><code>available</code></dt>
      <dd>Providing the free space available for allocating new volumes
        in the pool. Due to underlying device constraints it may not be
        possible to allocate the entire free space to a single volume.
        This value is in bytes. This is not applicable when creating a
        pool. <span class="since">Since 0.4.1</span></dd>
    </dl>

    <h3><a name="StoragePoolSource">Source elements</a></h3>

    <p>
      A single <code>source</code> element is contained within the top level
      <code>pool</code> element. This tag is used to describe the source of
      the storage pool. The set of child elements that it will contain
      depend on the pool type, but come from the following child elements:
    </p>

    <pre>
        ...
        &lt;source&gt;
          &lt;host name="iscsi.example.com"/&gt;
          &lt;device path="demo-target"/&gt;
          &lt;auth type='chap' username='myname'&gt;
            &lt;secret usage='mycluster_myname'/&gt;
          &lt;/auth&gt;
          &lt;vendor name="Acme"/&gt;
          &lt;product name="model"/&gt;
        &lt;/source&gt;
        ...</pre>

    <pre>
        ...
        &lt;source&gt;
          &lt;adapter type='scsi_host' name='scsi_host1'/&gt;
        &lt;/source&gt;
        ...</pre>

    <pre>
        ...
        &lt;source&gt;
          &lt;adapter type='scsi_host'&gt;
            &lt;parentaddr unique_id='1'&gt;
              &lt;address domain='0x0000' bus='0x00' slot='0x1f' addr='0x2'/&gt;
            &lt;/parentaddr&gt;
          &lt;/adapter&gt;
        &lt;/source&gt;
        ...</pre>

    <pre>
        ...
        &lt;source&gt;
          &lt;adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/&gt;
        &lt;/source&gt;
        ...</pre>

    <dl>
      <dt><code>device</code></dt>
      <dd>Provides the source for pools backed by physical devices
        (pool types <code>fs</code>, <code>logical</code>, <code>disk</code>,
        <code>iscsi</code>, <code>zfs</code>).
        May be repeated multiple times depending on backend driver. Contains
        a single attribute <code>path</code> which is the fully qualified
        path to the block device node. <span class="since">Since 0.4.1</span></dd>
      <dt><code>dir</code></dt>
      <dd>Provides the source for pools backed by directories (pool
        type <code>dir</code>), or optionally to select a subdirectory
        within a pool that resembles a filesystem (pool
        type <code>gluster</code>). May
        only occur once. Contains a single attribute <code>path</code>
        which is the fully qualified path to the backing directory.
        <span class="since">Since 0.4.1</span></dd>
      <dt><code>adapter</code></dt>
      <dd>Provides the source for pools backed by SCSI adapters (pool
        type <code>scsi</code>). May only occur once.
        <dl>
          <dt><code>name</code></dt>
          <dd>The SCSI adapter name (e.g. "scsi_host1", although a name
            such as "host1" is still supported for backwards compatibility,
            it is not recommended). The scsi_host name to be used can be
            determined from the output of a <code>virsh nodedev-list
            scsi_host</code> command followed by a combination of
            <code>lspci</code> and <code>virsh nodedev-dumpxml
            scsi_hostN</code> commands to find the <code>scsi_hostN</code>
            to be used. <span class="since">Since 0.6.2</span>
            <p>
            It is further recommended to utilize the
            <code>parentaddr</code> element since it's possible to have
            the path to which the scsi_hostN uses change between system
            reboots. <span class="since">Since 1.2.7</span>
            </p>
          </dd>
        </dl>
        <dl>
          <dt><code>type</code></dt>
          <dd>Specifies the adapter type. Valid values are "scsi_host" or
            "fc_host". If omitted and the <code>name</code> attribute is
            specified, then it defaults to "scsi_host". To keep backwards
            compatibility, this attribute is optional <b>only</b> for the
            "scsi_host" adapter, but is mandatory for the "fc_host" adapter.
            <span class="since">Since 1.0.5</span>
            A "fc_host" capable scsi_hostN can be determined by using
            <code>virsh nodedev-list --cap fc_host</code>.
            <span class="since">Since 1.2.8</span>
            <p>
            Note: Regardless of whether a "scsi_host" adapter type is defined
            using a <code>name</code> or a <code>parentaddr</code>, it
            should refer to a real scsi_host adapter as found through a
            <code>virsh nodedev-list scsi_host</code> and <code>virsh
            nodedev-dumpxml scsi_hostN</code> on one of the scsi_host's
            displayed. It should not refer to a "fc_host" capable scsi_hostN
            nor should it refer to the vHBA created for some "fc_host"
            adapter. For a vHBA the <code>nodedev-dumpxml</code>
            output parent setting will be the "fc_host" capable scsi_hostN
            value. Additionally, do not refer to an iSCSI scsi_hostN for the
            "scsi_host" source. An iSCSI scsi_hostN's
            <code>nodedev-dumpxml</code> output parent field is generally
            "computer". This is a libvirt created parent value indicating
            no parent was defined for the node device.
            </p>
            </dd>
        </dl>
        <dl>
          <dt><code>wwnn</code> and <code>wwpn</code></dt>
          <dd>The "World Wide Node Name" (<code>wwnn</code>) and "World Wide
            Port Name" (<code>wwpn</code>) are used by the "fc_host" adapter
            to uniquely identify the device in the Fibre Channel storage fabric
            (the device can be either a HBA or vHBA). Both wwnn and wwpn should
            be specified. Use the command 'virsh nodedev-dumpxml' to determine
            how to set the values for the wwnn/wwpn of a (v)HBA. The wwnn and
            wwpn have very specific numerical format requirements based on the
            hypervisor being used, thus care should be taken if you decide to
            generate your own to follow the standards; otherwise, the pool
            will fail to start with an opaque error message indicating failure
            to write to the vport_create file during vport create/delete due
            to "No such file or directory".
            <span class="since">Since 1.0.4</span>
          </dd>
        </dl>
        <dl>
          <dt><code>parent</code></dt>
          <dd>Used by the "fc_host" adapter type to optionally specify the
            parent scsi_host device defined in the
            <a href="formatnode.html">Node Device</a> database as the
            <a href="http://wiki.libvirt.org/page/NPIV_in_libvirt">NPIV</a>
            virtual Host Bus Adapter (vHBA). The value provided must be
            a vport capable scsi_host. The value is not the scsi_host of
            the vHBA created by 'virsh nodedev-create', rather it is
            the parent of that vHBA. If the value is not provided, libvirt
            will determine the parent based either finding the wwnn,wwpn
            defined for an existing scsi_host or by creating a vHBA. Providing
            the parent attribute is also useful for the duplicate pool
            definition checks. This is more important in environments where
            both the "fc_host" and "scsi_host" source adapter pools are being
            used in order to ensure a new definition doesn't duplicate using
            the scsi_hostN of some existing storage pool.
            <span class="since">Since 1.0.4</span>
          </dd>
          <dt><code>managed</code></dt>
          <dd>An optional attribute to instruct the SCSI storage backend to
            manage destroying the vHBA when the pool is destroyed. For
            configurations that do not provide an already created vHBA
            from a 'virsh nodedev-create', libvirt will set this property
            to "yes". For configurations that have already created a vHBA
            via 'virsh nodedev-create' and are using the wwnn/wwpn from
            that vHBA and optionally the scsi_host parent, setting this
            attribute to "yes" will allow libvirt to destroy the node device
            when the pool is destroyed. If this attribute is set to "no" or
            not defined in the XML, then libvirt will not destroy the vHBA.
            <span class="since">Since 1.2.11</span>
          </dd>
        </dl>
        <dl>
          <dt><code>parentaddr</code></dt>
          <dd>Used by the "scsi_host" adapter type instead of the
            <code>name</code> attribute to more uniquely identify the
            SCSI host. Using a combination of the <code>unique_id</code>
            attribute and the <code>address</code> element to formulate
            a PCI address, a search will be performed of the
            <code>/sys/class/scsi_host/hostNN</code> links for a
            matching PCI address with a matching <code>unique_id</code>
            value in the <code>/sys/class/scsi_host/hostNN/unique_id</code>
            file. The value in the "unique_id" file will be unique enough
            for the specific PCI address. The <code>hostNN</code> will be
            used by libvirt as the basis to define which SCSI host is to
            be used for the currently booted system.
            <span class="since">Since 1.2.7</span>
            <dl>
              <dt><code>address</code></dt>
              <dd>The PCI address of the scsi_host device to be used. Using
                a PCI address provides consistent naming across system reboots
                and kernel reloads. The address will have four attributes:
                <code>domain</code> (a 2-byte hex integer, not currently used
                by qemu), <code>bus</code> (a hex value between 0 and 0xff,
                inclusive), <code>slot</code> (a hex value between 0x0 and
                0x1f, inclusive), and <code>function</code> (a value between
                0 and 7, inclusive). The PCI address can be determined by
                listing the <code>/sys/bus/pci/devices</code> and the
                <code>/sys/class/scsi_host</code> directories in order to
                find the expected scsi_host device. The address will be
                provided in a format such as "0000:00:1f:2" which can be
                used to generate the expected PCI address
                "domain='0x0000' bus='0x00' slot='0x1f' function='0x0'".
                Optionally, using the combination of the commands 'virsh
                nodedev-list scsi_host' and 'virsh nodedev-dumpxml' for a
                specific list entry and converting the resulting
                <code>path</code> element as the basis to formulate the
                correctly formatted PCI address.
              </dd>
            </dl>
            <dl>
              <dt><code>unique_id</code></dt>
              <dd>Required <code>parentaddr</code> attribute used to determine
                which of the scsi_host adapters for the provided PCI address
                should be used. The value is determine by contents of the
                <code>unique_id</code> file for the specific scsi_host adapter.
                For a PCI address of "0000:00:1f:2", the unique identifer files
                can be found using the command
                <code>find -H /sys/class/scsi_host/host*/unique_id |
                xargs grep '[0-9]'</code>. Optionally, the
                <code>virsh nodedev-dumpxml scsi_hostN</code>' of a
                specific scsi_hostN list entry will list the
                <code>unique_id</code> value.
              </dd>
            </dl>
          </dd>
        </dl>
      </dd>
      <dt><code>host</code></dt>
      <dd>Provides the source for pools backed by storage from a
        remote server (pool types <code>netfs</code>, <code>iscsi</code>,
        <code>rbd</code>, <code>sheepdog</code>, <code>gluster</code>). Will be
        used in combination with a <code>directory</code>
        or <code>device</code> element. Contains an attribute <code>name</code>
        which is the hostname or IP address of the server. May optionally
        contain a <code>port</code> attribute for the protocol specific
        port number. <span class="since">Since 0.4.1</span></dd>
      <dt><code>auth</code></dt>
      <dd>If present, the <code>auth</code> element provides the
        authentication credentials needed to access the source by the
        setting of the <code>type</code> attribute (pool
        types <code>iscsi</code>, <code>rbd</code>). The <code>type</code>
        must be either "chap" or "ceph". Use "ceph" for
        Ceph RBD (Rados Block Device) network sources and use "iscsi" for CHAP
        (Challenge-Handshake Authentication Protocol) iSCSI
        targets. Additionally a mandatory attribute
        <code>username</code> identifies the username to use during
        authentication as well as a sub-element <code>secret</code> with
        a mandatory attribute <code>type</code>, to tie back to a
        <a href="formatsecret.html">libvirt secret object</a> that
        holds the actual password or other credentials. The domain XML
        intentionally does not expose the password, only the reference
        to the object that manages the password.
        The <code>secret</code> element requires either a <code>uuid</code>
        attribute with the UUID of the secret object or a <code>usage</code>
        attribute matching the key that was specified in the
        secret object.  <span class="since">Since 0.9.7 for "ceph" and
        1.1.1 for "chap"</span>
      </dd>
      <dt><code>name</code></dt>
      <dd>Provides the source for pools backed by storage from a
        named element (pool types <code>logical</code>, <code>rbd</code>,
        <code>sheepdog</code>, <code>gluster</code>).  Contains a
        string identifier.
        <span class="since">Since 0.4.5</span></dd>
      <dt><code>format</code></dt>
      <dd>Provides information about the format of the pool (pool
        types <code>fs</code>, <code>netfs</code>, <code>disk</code>,
        <code>logical</code>). This
        contains a single attribute <code>type</code> whose value is
        backend specific. This is typically used to indicate filesystem
        type, or network filesystem type, or partition table type, or
        LVM metadata type. All drivers are required to have a default
        value for this, so it is optional. <span class="since">Since 0.4.1</span></dd>

      <dt><code>vendor</code></dt>
      <dd>Provides optional information about the vendor of the
        storage device. This contains a single
        attribute <code>name</code> whose value is backend
        specific. <span class="since">Since 0.8.4</span></dd>
      <dt><code>product</code></dt>
      <dd>Provides an optional product name of the storage device.
        This contains a single attribute <code>name</code> whose value
        is backend specific.  <span class="since">Since 0.8.4</span></dd>
    </dl>

    <h3><a name="StoragePoolTarget">Target elements</a></h3>

    <p>
      A single <code>target</code> element is contained within the top level
      <code>pool</code> element for some types of pools (pool
      types <code>dir</code>, <code>fs</code>, <code>netfs</code>,
      <code>logical</code>, <code>disk</code>, <code>iscsi</code>,
      <code>scsi</code>, <code>mpath</code>). This tag is used to
      describe the mapping of
      the storage pool into the host filesystem. It can contain the following
      child elements:
    </p>

    <pre>
        ...
        &lt;target&gt;
          &lt;path&gt;/dev/disk/by-path&lt;/path&gt;
          &lt;permissions&gt;
            &lt;owner&gt;107&lt;/owner&gt;
            &lt;group&gt;107&lt;/group&gt;
            &lt;mode&gt;0744&lt;/mode&gt;
            &lt;label&gt;virt_image_t&lt;/label&gt;
          &lt;/permissions&gt;
          &lt;timestamps&gt;
            &lt;atime&gt;1341933637.273190990&lt;/atime&gt;
            &lt;mtime&gt;1341930622.047245868&lt;/mtime&gt;
            &lt;ctime&gt;1341930622.047245868&lt;/ctime&gt;
          &lt;/timestamps&gt;
          &lt;encryption type='...'&gt;
            ...
          &lt;/encryption&gt;
        &lt;/target&gt;
      &lt;/pool&gt;</pre>

    <dl>
      <dt><code>path</code></dt>
      <dd>Provides the location at which the pool will be mapped into
        the local filesystem namespace. For a filesystem/directory based
        pool it will be the name of the directory in which volumes will
        be created. For device based pools it will be the name of the directory in which
        devices nodes exist. For the latter <code>/dev/</code> may seem
        like the logical choice, however, devices nodes there are not
        guaranteed stable across reboots, since they are allocated on
        demand. It is preferable to use a stable location such as one
        of the <code>/dev/disk/by-{path|id|uuid|label}</code> locations.
        <span class="since">Since 0.4.1</span>
      </dd>
      <dt><code>permissions</code></dt>
      <dd>This is currently only useful for directory or filesystem based
        pools, which are mapped as a directory into the local filesystem
        namespace. It provides information about the permissions to use for the
        final directory when the pool is built. The
        <code>mode</code> element contains the octal permission set. The
        <code>owner</code> element contains the numeric user ID. The <code>group</code>
        element contains the numeric group ID. The <code>label</code> element
        contains the MAC (eg SELinux) label string.
        <span class="since">Since 0.4.1</span>
      </dd>
      <dt><code>timestamps</code></dt>
      <dd>Provides timing information about the volume. Up to four
        sub-elements are present,
        where <code>atime</code>, <code>btime</code>, <code>ctime</code>
        and <code>mtime</code> hold the access, birth, change and
        modification time of the volume, where known. The used time
        format is &lt;seconds&gt;.&lt;nanoseconds&gt; since the
        beginning of the epoch (1 Jan 1970). If nanosecond resolution
        is 0 or otherwise unsupported by the host OS or filesystem,
        then the nanoseconds part is omitted.  This is a readonly
        attribute and is ignored when creating a volume.
        <span class="since">Since 0.10.0</span>
      </dd>
      <dt><code>encryption</code></dt>
      <dd>If present, specifies how the volume is encrypted.  See
        the <a href="formatstorageencryption.html">Storage Encryption</a> page
        for more information.
      </dd>
    </dl>

    <h3><a name="StoragePoolExtents">Device extents</a></h3>

    <p>
      If a storage pool exposes information about its underlying
      placement / allocation scheme, the <code>device</code> element
      within the <code>source</code> element may contain information
      about its available extents. Some pools have a constraint that
      a volume must be allocated entirely within a single constraint
      (eg disk partition pools). Thus the extent information allows an
      application to determine the maximum possible size for a new
      volume
    </p>
    <p>
      For storage pools supporting extent information, within each
      <code>device</code> element there will be zero or more <code>freeExtent</code>
      elements. Each of these elements contains two attributes, <code>start</code>
      and <code>end</code> which provide the boundaries of the extent on the
      device, measured in bytes.  <span class="since">Since 0.4.1</span>
    </p>

    <h2><a name="StorageVol">Storage volume XML</a></h2>
    <p>
      A storage volume will generally be either a file or a device
      node; <span class="since">since 1.2.0</span>, an optional
      output-only attribute <code>type</code> lists the actual type
      (file, block, dir, network, or netdir), which is also available
      from <code>virStorageVolGetInfo()</code>.  The storage volume
      XML format is available <span class="since">since 0.4.1</span>
    </p>

    <h3><a name="StorageVolFirst">General metadata</a></h3>

    <pre>
      &lt;volume type='file'&gt;
        &lt;name&gt;sparse.img&lt;/name&gt;
        &lt;key&gt;/var/lib/xen/images/sparse.img&lt;/key&gt;
        &lt;allocation&gt;0&lt;/allocation&gt;
        &lt;capacity unit="T"&gt;1&lt;/capacity&gt;
        ...</pre>

    <dl>
      <dt><code>name</code></dt>
      <dd>Providing a name for the volume which is unique to the pool.
        This is mandatory when defining a volume. For a disk pool, the
        name must be combination of the <code>source</code> device path
        device and next partition number to be created. For example, if
        the <code>source</code> device path is /dev/sdb and there are no
        partitions on the disk, then the name must be sdb1 with the next
        name being sdb2 and so on.
        <span class="since">Since 0.4.1</span></dd>
      <dt><code>key</code></dt>
      <dd>Providing an identifier for the volume which identifies a
          single volume. In some cases it's possible to have two distinct keys
          identifying a single volume. This field cannot be set when creating
          a volume: it is always generated.
        <span class="since">Since 0.4.1</span></dd>
      <dt><code>allocation</code></dt>
      <dd>Providing the total storage allocation for the volume. This
        may be smaller than the logical capacity if the volume is sparsely
        allocated. It may also be larger than the logical capacity if the
        volume has substantial metadata overhead. This value is in bytes.
        If omitted when creating a volume, the volume will be fully
        allocated at time of creation. If set to a value smaller than the
        capacity, the pool has the <strong>option</strong> of deciding
        to sparsely allocate a volume. It does not have to honour requests
        for sparse allocation though. Different types of pools may treat
        sparse volumes differently. For example, the <code>logical</code>
        pool will not automatically expand volume's allocation when it
        gets full; the user is responsible for doing that or configuring
        dmeventd to do so automatically.<br/>
        <br/>
        By default this is specified in bytes, but an optional attribute
        <code>unit</code> can be specified to adjust the passed value.
        Values can be: 'B' or 'bytes' for bytes, 'KB' (kilobytes,
        10<sup>3</sup> or 1000 bytes), 'K' or 'KiB' (kibibytes,
        2<sup>10</sup> or 1024 bytes), 'MB' (megabytes, 10<sup>6</sup>
        or 1,000,000 bytes), 'M' or 'MiB' (mebibytes, 2<sup>20</sup>
        or 1,048,576 bytes), 'GB' (gigabytes, 10<sup>9</sup> or
        1,000,000,000 bytes), 'G' or 'GiB' (gibibytes, 2<sup>30</sup>
        or 1,073,741,824 bytes), 'TB' (terabytes, 10<sup>12</sup> or
        1,000,000,000,000 bytes), 'T' or 'TiB' (tebibytes,
        2<sup>40</sup> or 1,099,511,627,776 bytes), 'PB' (petabytes,
        10<sup>15</sup> or 1,000,000,000,000,000 bytes), 'P' or 'PiB'
        (pebibytes, 2<sup>50</sup> or 1,125,899,906,842,624 bytes),
        'EB' (exabytes, 10<sup>18</sup> or 1,000,000,000,000,000,000
        bytes), or 'E' or 'EiB' (exbibytes, 2<sup>60</sup> or
        1,152,921,504,606,846,976 bytes).  <span class="since">Since
        0.4.1, multi-character <code>unit</code> since
        0.9.11</span></dd>
      <dt><code>capacity</code></dt>
      <dd>Providing the logical capacity for the volume. This value is
        in bytes by default, but a <code>unit</code> attribute can be
        specified with the same semantics as for <code>allocation</code>
        This is compulsory when creating a volume.
        <span class="since">Since 0.4.1</span></dd>
      <dt><code>source</code></dt>
      <dd>Provides information about the underlying storage allocation
        of the volume. This may not be available for some pool types.
        <span class="since">Since 0.4.1</span></dd>
      <dt><code>target</code></dt>
      <dd>Provides information about the representation of the volume
        on the local host. <span class="since">Since 0.4.1</span></dd>
    </dl>

    <h3><a name="StorageVolTarget">Target elements</a></h3>

    <p>
      A single <code>target</code> element is contained within the top level
      <code>volume</code> element. This tag is used to describe the mapping of
      the storage volume into the host filesystem. It can contain the following
      child elements:
    </p>

    <pre>
        ...
        &lt;target&gt;
          &lt;path&gt;/var/lib/virt/images/sparse.img&lt;/path&gt;
          &lt;format type='qcow2'/&gt;
          &lt;permissions&gt;
            &lt;owner&gt;107&lt;/owner&gt;
            &lt;group&gt;107&lt;/group&gt;
            &lt;mode&gt;0744&lt;/mode&gt;
            &lt;label&gt;virt_image_t&lt;/label&gt;
          &lt;/permissions&gt;
          &lt;compat&gt;1.1&lt;/compat&gt;
          &lt;nocow/&gt;
          &lt;features&gt;
            &lt;lazy_refcounts/&gt;
          &lt;/features&gt;
        &lt;/target&gt;</pre>

    <dl>
      <dt><code>path</code></dt>
      <dd>Provides the location at which the volume can be accessed on
        the local filesystem, as an absolute path. This is a readonly
        attribute, so shouldn't be specified when creating a volume.
        <span class="since">Since 0.4.1</span></dd>
      <dt><code>format</code></dt>
      <dd>Provides information about the pool specific volume format.
        For disk pools it will provide the partition table format type, but is
        not preserved after a pool refresh or libvirtd restart. Use extended
        in order to create an extended disk extent partition. For filesystem
        or directory pools it will provide the file format type, eg cow,
        qcow, vmdk, raw. If omitted when creating a volume, the pool's
        default format will be used. The actual format is specified via
        the <code>type</code> attribute. Consult the
        <a href="storage.html">storage driver page</a> for the list of valid
        volume format type values for each specific pool. The
        <code>format</code> will be ignored on input for pools without a
        volume format type value and the default pool format will be used.
        <span class="since">Since 0.4.1</span></dd>
      <dt><code>permissions</code></dt>
      <dd>Provides information about the default permissions to use
        when creating volumes. This is currently only useful for directory
        or filesystem based pools, where the volumes allocated are simple
        files. For pools where the volumes are device nodes, the hotplug
        scripts determine permissions. It contains 4 child elements. The
        <code>mode</code> element contains the octal permission set. The
        <code>owner</code> element contains the numeric user ID. The <code>group</code>
        element contains the numeric group ID. The <code>label</code> element
        contains the MAC (eg SELinux) label string.
        <span class="since">Since 0.4.1</span>
      </dd>
      <dt><code>compat</code></dt>
      <dd>Specify compatibility level. So far, this is only used for
        <code>type='qcow2'</code> volumes. Valid values are <code>0.10</code>
        and <code>1.1</code> so far, specifying QEMU version the images should
        be compatible with. If the <code>feature</code> element is present,
        1.1 is used. If omitted, qemu-img default is used.
        <span class="since">Since 1.1.0</span>
      </dd>
      <dt><code>nocow</code></dt>
      <dd>Turn off COW of the newly created volume. So far, this is only valid
        for a file image in btrfs file system. It will improve performance when
        the file image is used in VM. To create non-raw file images, it
        requires QEMU version since 2.1. <span class="since">Since 1.2.7</span>
      </dd>
      <dt><code>features</code></dt>
      <dd>Format-specific features. Only used for <code>qcow2</code> now.
        Valid sub-elements are:
        <ul>
          <li><code>&lt;lazy_refcounts/&gt;</code> - allow delayed reference
          counter updates. <span class="since">Since 1.1.0</span></li>
        </ul>
      </dd>
    </dl>

    <h3><a name="StorageVolBacking">Backing store elements</a></h3>

    <p>
      A single <code>backingStore</code> element is contained within the top level
      <code>volume</code> element. This tag is used to describe the optional copy
      on write, backing store for the storage volume. It can contain the following
      child elements:
    </p>

    <pre>
        ...
        &lt;backingStore&gt;
          &lt;path&gt;/var/lib/virt/images/master.img&lt;/path&gt;
          &lt;format type='raw'/&gt;
          &lt;permissions&gt;
            &lt;owner&gt;107&lt;/owner&gt;
            &lt;group&gt;107&lt;/group&gt;
            &lt;mode&gt;0744&lt;/mode&gt;
            &lt;label&gt;virt_image_t&lt;/label&gt;
          &lt;/permissions&gt;
        &lt;/backingStore&gt;
      &lt;/volume&gt;</pre>

    <dl>
      <dt><code>path</code></dt>
      <dd>Provides the location at which the backing store can be accessed on
        the local filesystem, as an absolute path. If omitted, there is no
        backing store for this volume.
        <span class="since">Since 0.6.0</span></dd>
      <dt><code>format</code></dt>
      <dd>Provides information about the pool specific backing store format.
        For disk pools it will provide the partition type. For filesystem
        or directory pools it will provide the file format type, eg cow,
        qcow, vmdk, raw. The actual format is specified via the type attribute.
        Consult the pool-specific docs for the list of valid
        values. Most file formats require a backing store of the same format,
        however, the qcow2 format allows a different backing store format.
        <span class="since">Since 0.6.0</span></dd>
      <dt><code>permissions</code></dt>
      <dd>Provides information about the permissions of the backing file.
        It contains 4 child elements. The
        <code>mode</code> element contains the octal permission set. The
        <code>owner</code> element contains the numeric user ID. The <code>group</code>
        element contains the numeric group ID. The <code>label</code> element
        contains the MAC (eg SELinux) label string.
        <span class="since">Since 0.6.0</span>
      </dd>
    </dl>

    <h2><a name="examples">Example configuration</a></h2>

    <p>
      Here are a couple of examples, for a more complete set demonstrating
      every type of storage pool, consult the <a href="storage.html">storage driver page</a>
    </p>

    <h3><a name="exampleFile">File based storage pool</a></h3>

    <pre>
      &lt;pool type="dir"&gt;
        &lt;name&gt;virtimages&lt;/name&gt;
        &lt;target&gt;
          &lt;path&gt;/var/lib/virt/images&lt;/path&gt;
        &lt;/target&gt;
      &lt;/pool&gt;</pre>

    <h3><a name="exampleISCSI">iSCSI based storage pool</a></h3>

    <pre>
      &lt;pool type="iscsi"&gt;
        &lt;name&gt;virtimages&lt;/name&gt;
        &lt;source&gt;
          &lt;host name="iscsi.example.com"/&gt;
          &lt;device path="iqn.2013-06.com.example:iscsi-pool"/&gt;
          &lt;auth type='chap' username='myuser'&gt;
            &lt;secret usage='libvirtiscsi'/&gt;
          &lt;/auth&gt;
        &lt;/source&gt;
        &lt;target&gt;
          &lt;path&gt;/dev/disk/by-path&lt;/path&gt;
        &lt;/target&gt;
      &lt;/pool&gt;</pre>

    <h3><a name="exampleVol">Storage volume</a></h3>

    <pre>
      &lt;volume&gt;
        &lt;name&gt;sparse.img&lt;/name&gt;
        &lt;allocation&gt;0&lt;/allocation&gt;
        &lt;capacity unit="T"&gt;1&lt;/capacity&gt;
        &lt;target&gt;
          &lt;path&gt;/var/lib/virt/images/sparse.img&lt;/path&gt;
          &lt;permissions&gt;
            &lt;owner&gt;107&lt;/owner&gt;
            &lt;group&gt;107&lt;/group&gt;
            &lt;mode&gt;0744&lt;/mode&gt;
            &lt;label&gt;virt_image_t&lt;/label&gt;
          &lt;/permissions&gt;
        &lt;/target&gt;
      &lt;/volume&gt;</pre>
  </body>
</html>