# translation of ko.po to Korean # Copyright (C) 2006, 2007 Free Software Foundation, Inc. # This file is distributed under the same license as the PACKAGE package. # # Eunju Kim , 2006, 2007. msgid "" msgstr "" "Project-Id-Version: ko\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-11-25 16:34+0100\n" "PO-Revision-Date: 2007-09-11 09:54+1000\n" "Last-Translator: Eunju Kim \n" "Language-Team: Korean \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" #: gnulib/lib/gai_strerror.c:41 msgid "Address family for hostname not supported" msgstr "" #: gnulib/lib/gai_strerror.c:42 msgid "Temporary failure in name resolution" msgstr "" #: gnulib/lib/gai_strerror.c:43 msgid "Bad value for ai_flags" msgstr "" #: gnulib/lib/gai_strerror.c:44 msgid "Non-recoverable failure in name resolution" msgstr "" #: gnulib/lib/gai_strerror.c:45 #, fuzzy msgid "ai_family not supported" msgstr "라이브러리가 지원되지 않아 라이브러리 호출 실패" #: gnulib/lib/gai_strerror.c:46 #, fuzzy msgid "Memory allocation failure" msgstr "메모리 할당 변경" #: gnulib/lib/gai_strerror.c:47 msgid "No address associated with hostname" msgstr "" #: gnulib/lib/gai_strerror.c:48 msgid "Name or service not known" msgstr "" #: gnulib/lib/gai_strerror.c:49 msgid "Servname not supported for ai_socktype" msgstr "" #: gnulib/lib/gai_strerror.c:50 msgid "ai_socktype not supported" msgstr "" #: gnulib/lib/gai_strerror.c:51 #, fuzzy msgid "System error" msgstr "시스템 호출 오류" #: gnulib/lib/gai_strerror.c:52 msgid "Argument buffer too small" msgstr "" #: gnulib/lib/gai_strerror.c:54 msgid "Processing request in progress" msgstr "" #: gnulib/lib/gai_strerror.c:55 msgid "Request canceled" msgstr "" #: gnulib/lib/gai_strerror.c:56 msgid "Request not canceled" msgstr "" #: gnulib/lib/gai_strerror.c:57 msgid "All requests done" msgstr "" #: gnulib/lib/gai_strerror.c:58 msgid "Interrupted by a signal" msgstr "" #: gnulib/lib/gai_strerror.c:59 msgid "Parameter string not correctly encoded" msgstr "" #: gnulib/lib/gai_strerror.c:71 #, fuzzy msgid "Unknown error" msgstr "알려지지 않음" #: qemud/qemud.c:166 src/remote_internal.c:940 #, c-format msgid "Cannot access %s '%s': %s (%d)" msgstr "" #: qemud/qemud.c:183 #, c-format msgid "gnutls_certificate_allocate_credentials: %s" msgstr "" #: qemud/qemud.c:196 #, c-format msgid "gnutls_certificate_set_x509_trust_file: %s" msgstr "" #: qemud/qemud.c:210 #, c-format msgid "gnutls_certificate_set_x509_crl_file: %s" msgstr "" #: qemud/qemud.c:228 #, c-format msgid "gnutls_certificate_set_x509_key_file: %s" msgstr "" #: qemud/qemud.c:241 #, c-format msgid "gnutls_dh_params_init: %s" msgstr "" #: qemud/qemud.c:247 #, c-format msgid "gnutls_dh_params_generate2: %s" msgstr "" #: qemud/qemud.c:267 #, fuzzy, c-format msgid "Failed to read from signal pipe: %s" msgstr "Xen 데몬에서 읽기 실패" #: qemud/qemud.c:276 #, fuzzy msgid "Reloading configuration on SIGHUP" msgstr "설정 할당 중" #: qemud/qemud.c:278 #, fuzzy msgid "Error while reloading drivers" msgstr "메모리 할당 오류: %s" #: qemud/qemud.c:284 #, c-format msgid "Shutting down on signal %d" msgstr "" #: qemud/qemud.c:290 #, fuzzy, c-format msgid "Received unexpected signal %d" msgstr "예상외의 값 노드" #: qemud/qemud.c:309 src/util.c:232 src/util.c:263 msgid "Failed to set close-on-exec file descriptor flag" msgstr "" #: qemud/qemud.c:324 src/util.c:226 src/util.c:257 msgid "Failed to set non-blocking file descriptor flag" msgstr "" #: qemud/qemud.c:465 #, fuzzy, c-format msgid "Failed to open pid file '%s' : %s" msgstr "'%s' 열기 실패: %s" #: qemud/qemud.c:471 #, fuzzy, c-format msgid "Failed to fdopen pid file '%s' : %s" msgstr "'%s' 열기 실패: %s" #: qemud/qemud.c:478 #, fuzzy, c-format msgid "Failed to write to pid file '%s' : %s" msgstr "'%s' 열기 실패: %s" #: qemud/qemud.c:485 #, fuzzy, c-format msgid "Failed to close pid file '%s' : %s" msgstr "'%s' 열기 실패: %s" #: qemud/qemud.c:502 #, fuzzy msgid "Failed to allocate memory for struct qemud_socket" msgstr "메모리 할당 실패" #: qemud/qemud.c:512 #, fuzzy, c-format msgid "Failed to create socket: %s" msgstr "소켓 %d에 읽기 실패\n" #: qemud/qemud.c:534 #, fuzzy, c-format msgid "Failed to bind socket to '%s': %s" msgstr "'%s' 열기 실패: %s" #: qemud/qemud.c:543 #, fuzzy, c-format msgid "Failed to listen for connections on '%s': %s" msgstr "'%s' 열기 실패: %s" #: qemud/qemud.c:555 qemud/qemud.c:686 msgid "Failed to add server event callback" msgstr "" #: qemud/qemud.c:584 #, c-format msgid "getaddrinfo: %s\n" msgstr "" #: qemud/qemud.c:593 #, c-format msgid "socket: %s" msgstr "" #: qemud/qemud.c:602 #, c-format msgid "bind: %s" msgstr "" #: qemud/qemud.c:609 #, c-format msgid "listen: %s" msgstr "" #: qemud/qemud.c:645 #, c-format msgid "remoteListenTCP: calloc: %s" msgstr "" #: qemud/qemud.c:676 #, c-format msgid "remoteListenTCP: listen: %s" msgstr "" #: qemud/qemud.c:725 #, fuzzy, c-format msgid "Failed to find user record for uid '%d': %s" msgstr "네트워크 찾기 실패: %s" #: qemud/qemud.c:742 msgid "Resulting path too long for buffer in qemudInitPaths()" msgstr "" #: qemud/qemud.c:750 #, fuzzy msgid "Failed to allocate struct qemud_server" msgstr "메모리 할당 실패" #: qemud/qemud.c:829 #, fuzzy, c-format msgid "Failed to initialize SASL authentication %s" msgstr "네트워크 찾기 실패: %s" #: qemud/qemud.c:844 #, fuzzy, c-format msgid "Failed to connect to system bus for PolicyKit auth: %s" msgstr "하이퍼바이저에 연결하기 실패" #: qemud/qemud.c:955 #, c-format msgid "remoteInitializeTLSSession: %s" msgstr "" #: qemud/qemud.c:972 #, c-format msgid "remoteCheckDN: gnutls_x509_cert_get_dn: %s" msgstr "" #: qemud/qemud.c:991 #, c-format msgid "remoteCheckDN: failed: client DN is %s" msgstr "" #: qemud/qemud.c:1007 #, fuzzy, c-format msgid "remoteCheckCertificate: verify failed: %s" msgstr "작업 실패: %s" #: qemud/qemud.c:1015 msgid "remoteCheckCertificate: the client certificate is not trusted." msgstr "" #: qemud/qemud.c:1020 msgid "remoteCheckCertificate: the client certificate has unknown issuer." msgstr "" #: qemud/qemud.c:1025 msgid "remoteCheckCertificate: the client certificate has been revoked." msgstr "" #: qemud/qemud.c:1031 msgid "" "remoteCheckCertificate: the client certificate uses an insecure algorithm." msgstr "" #: qemud/qemud.c:1040 msgid "remoteCheckCertificate: certificate is not X.509" msgstr "" #: qemud/qemud.c:1045 msgid "remoteCheckCertificate: no peers" msgstr "" #: qemud/qemud.c:1056 msgid "remoteCheckCertificate: gnutls_x509_crt_init failed" msgstr "" #: qemud/qemud.c:1066 msgid "remoteCheckCertificate: the client certificate has expired" msgstr "" #: qemud/qemud.c:1073 msgid "remoteCheckCertificate: the client certificate is not yet activated" msgstr "" #: qemud/qemud.c:1082 msgid "" "remoteCheckCertificate: client's Distinguished Name is not on the list of " "allowed clients (tls_allowed_dn_list). Use 'openssl x509 -in clientcert.pem " "-text' to view the Distinguished Name field in the client certificate, or " "run this daemon with --verbose option." msgstr "" #: qemud/qemud.c:1099 msgid "remoteCheckCertificate: failed to verify client's certificate" msgstr "" #: qemud/qemud.c:1103 msgid "" "remoteCheckCertificate: tls_no_verify_certificate is set so the bad " "certificate is ignored" msgstr "" #: qemud/qemud.c:1125 #, fuzzy, c-format msgid "Failed to verify client credentials: %s" msgstr "%s %s 인터페이스 상태 보기 실패" #: qemud/qemud.c:1150 #, fuzzy, c-format msgid "Failed to accept connection: %s" msgstr "%s 네트워크 시작 실패" #: qemud/qemud.c:1189 #, c-format msgid "Turn off polkit auth for privileged client %d" msgstr "" #: qemud/qemud.c:1228 qemud/qemud.c:1471 qemud/qemud.c:1611 #, fuzzy, c-format msgid "TLS handshake failed: %s" msgstr "GET 작업 실패: %s" #: qemud/qemud.c:1299 #, c-format msgid "read: %s" msgstr "" #: qemud/qemud.c:1312 #, c-format msgid "gnutls_record_recv: %s" msgstr "" #: qemud/qemud.c:1495 #, c-format msgid "write: %s" msgstr "" #: qemud/qemud.c:1505 #, c-format msgid "gnutls_record_send: %s" msgstr "" #: qemud/qemud.c:1728 #, c-format msgid "Signal handler reported %d errors: last error: %s" msgstr "" #: qemud/qemud.c:1826 qemud/qemud.c:1847 #, fuzzy, c-format msgid "failed to allocate memory for %s config list" msgstr "메모리 할당 실패" #: qemud/qemud.c:1833 qemud/qemud.c:1864 #, fuzzy, c-format msgid "failed to allocate memory for %s config list value" msgstr "메모리 할당 실패" #: qemud/qemud.c:1852 qemud/qemud.c:1875 #, c-format msgid "remoteReadConfigFile: %s: %s: must be a string or list of strings\n" msgstr "" #: qemud/qemud.c:1892 #, c-format msgid "remoteReadConfigFile: %s: %s: invalid type: got %s; expected %s\n" msgstr "" #: qemud/qemud.c:1913 #, c-format msgid "remoteReadConfigFile: %s\n" msgstr "" #: qemud/qemud.c:1957 #, c-format msgid "remoteReadConfigFile: %s: %s: unsupported auth %s\n" msgstr "" #: qemud/qemud.c:2042 msgid "Cannot set group when not running as root" msgstr "" #: qemud/qemud.c:2046 #, fuzzy, c-format msgid "Failed to lookup group '%s'" msgstr "'%s' 열기 실패: %s" #: qemud/qemud.c:2059 qemud/qemud.c:2070 #, fuzzy, c-format msgid "Failed to parse mode '%s'" msgstr "'%s' 열기 실패: %s" #: qemud/qemud.c:2243 #, fuzzy, c-format msgid "Failed to fork as daemon: %s" msgstr "도메인 %s를 다시 시작하기 실패" #: qemud/qemud.c:2265 src/util.c:250 #, fuzzy, c-format msgid "Failed to create pipe: %s" msgstr "XML 생성하기 실패" #: qemud/qemud.c:2298 #, fuzzy, c-format msgid "Failed to change group ownership of %s" msgstr "도메인 %s를 %s에 코어 덤프하기 실패" #: qemud/qemud.c:2307 msgid "Failed to register callback for signal pipe" msgstr "" #: qemud/remote.c:109 msgid "xdr_remote_message_header" msgstr "" #: qemud/remote.c:117 #, c-format msgid "program mismatch (actual %x, expected %x)" msgstr "" #: qemud/remote.c:124 #, c-format msgid "version mismatch (actual %x, expected %x)" msgstr "" #: qemud/remote.c:130 #, c-format msgid "direction (%d) != REMOTE_CALL" msgstr "" #: qemud/remote.c:136 #, c-format msgid "status (%d) != REMOTE_OK" msgstr "" #: qemud/remote.c:152 #, fuzzy msgid "authentication required" msgstr "작업 실패" #: qemud/remote.c:165 #, fuzzy, c-format msgid "unknown procedure: %d" msgstr "알려지지 않은 HTTP 오류 코드 %d가 있음" #: qemud/remote.c:173 #, fuzzy msgid "parse args failed" msgstr "서버 응답 분석 실패" #: qemud/remote.c:189 #, c-format msgid "internal error - dispatch function returned invalid code %d" msgstr "" #: qemud/remote.c:211 msgid "dummy length" msgstr "" #: qemud/remote.c:218 msgid "serialise reply header" msgstr "" #: qemud/remote.c:227 qemud/remote.c:4034 msgid "serialise return struct" msgstr "" #: qemud/remote.c:282 msgid "serialise return error" msgstr "" #: qemud/remote.c:291 msgid "xdr_setpos" msgstr "" #: qemud/remote.c:297 msgid "serialise return length" msgstr "" #: qemud/remote.c:446 msgid "connection already open" msgstr "" #: qemud/remote.c:468 #, fuzzy msgid "connection not open" msgstr "잘못된 연결 포인터" #: qemud/remote.c:515 #, fuzzy msgid "out of memory in strdup" msgstr "메모리 부족" #: qemud/remote.c:643 msgid "maxCells > REMOTE_NODE_MAX_CELLS" msgstr "" #: qemud/remote.c:698 qemud/remote.c:740 qemud/remote.c:844 qemud/remote.c:870 #: qemud/remote.c:904 qemud/remote.c:943 qemud/remote.c:991 #: qemud/remote.c:1035 qemud/remote.c:1059 qemud/remote.c:1121 #: qemud/remote.c:1145 qemud/remote.c:1170 qemud/remote.c:1196 #: qemud/remote.c:1221 qemud/remote.c:1253 qemud/remote.c:1278 #: qemud/remote.c:1303 qemud/remote.c:1332 qemud/remote.c:1456 #: qemud/remote.c:1672 qemud/remote.c:1705 qemud/remote.c:1744 #: qemud/remote.c:1768 qemud/remote.c:1792 qemud/remote.c:1816 #: qemud/remote.c:1840 qemud/remote.c:1864 qemud/remote.c:1888 #: qemud/remote.c:1912 qemud/remote.c:1936 qemud/remote.c:1960 #, fuzzy msgid "domain not found" msgstr "도메인을 찾을 수 없음" #: qemud/remote.c:729 qemud/remote.c:811 msgid "nparams too large" msgstr "" #: qemud/remote.c:777 #, fuzzy msgid "unknown type" msgstr "알려지지 않은 OS 유형" #: qemud/remote.c:954 qemud/remote.c:1000 msgid "size > maximum buffer size" msgstr "" #: qemud/remote.c:1338 msgid "maxinfo > REMOTE_VCPUINFO_MAX" msgstr "" #: qemud/remote.c:1344 msgid "maxinfo * maplen > REMOTE_CPUMAPS_MAX" msgstr "" #: qemud/remote.c:1569 msgid "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" msgstr "" #: qemud/remote.c:1678 msgid "cpumap_len > REMOTE_CPUMAP_MAX" msgstr "" #: qemud/remote.c:1983 qemud/remote.c:2046 qemud/remote.c:3005 msgid "maxnames > REMOTE_NETWORK_NAME_LIST_MAX" msgstr "" #: qemud/remote.c:2015 msgid "maxids > REMOTE_DOMAIN_ID_LIST_MAX" msgstr "" #: qemud/remote.c:2079 qemud/remote.c:2139 qemud/remote.c:2163 #: qemud/remote.c:2189 qemud/remote.c:2213 qemud/remote.c:2275 #: qemud/remote.c:2299 #, fuzzy msgid "network not found" msgstr "네트워크를 찾을 수 없음" #: qemud/remote.c:2390 src/remote_internal.c:4123 #, c-format msgid "Cannot resolve address %d: %s" msgstr "" #: qemud/remote.c:2430 msgid "client tried invalid SASL init request" msgstr "" #: qemud/remote.c:2439 src/remote_internal.c:4351 #, fuzzy, c-format msgid "failed to get sock address %d (%s)" msgstr "%s %s 블럭 상태 보기 실패" #: qemud/remote.c:2450 src/remote_internal.c:4363 #, fuzzy, c-format msgid "failed to get peer address %d (%s)" msgstr "%s %s 인터페이스 상태 보기 실패" #: qemud/remote.c:2471 #, c-format msgid "sasl context setup failed %d (%s)" msgstr "" #: qemud/remote.c:2485 msgid "cannot TLS get cipher size" msgstr "" #: qemud/remote.c:2495 #, c-format msgid "cannot set SASL external SSF %d (%s)" msgstr "" #: qemud/remote.c:2524 #, c-format msgid "cannot set SASL security props %d (%s)" msgstr "" #: qemud/remote.c:2541 #, c-format msgid "cannot list SASL mechanisms %d (%s)" msgstr "" #: qemud/remote.c:2551 msgid "cannot allocate mechlist" msgstr "" #: qemud/remote.c:2576 src/remote_internal.c:4628 #, c-format msgid "cannot query SASL ssf on connection %d (%s)" msgstr "" #: qemud/remote.c:2586 #, c-format msgid "negotiated SSF %d was not strong enough" msgstr "" #: qemud/remote.c:2616 #, c-format msgid "cannot query SASL username on connection %d (%s)" msgstr "" #: qemud/remote.c:2624 msgid "no client username was found" msgstr "" #: qemud/remote.c:2634 #, fuzzy msgid "out of memory copying username" msgstr "메모리 부족" #: qemud/remote.c:2653 #, c-format msgid "SASL client %s not allowed in whitelist" msgstr "" #: qemud/remote.c:2679 qemud/remote.c:2758 msgid "client tried invalid SASL start request" msgstr "" #: qemud/remote.c:2695 #, c-format msgid "sasl start failed %d (%s)" msgstr "" #: qemud/remote.c:2703 #, c-format msgid "sasl start reply data too long %d" msgstr "" #: qemud/remote.c:2773 #, c-format msgid "sasl step failed %d (%s)" msgstr "" #: qemud/remote.c:2782 #, c-format msgid "sasl step reply data too long %d" msgstr "" #: qemud/remote.c:2831 msgid "client tried unsupported SASL init request" msgstr "" #: qemud/remote.c:2843 msgid "client tried unsupported SASL start request" msgstr "" #: qemud/remote.c:2855 msgid "client tried unsupported SASL step request" msgstr "" #: qemud/remote.c:2885 msgid "client tried invalid PolicyKit init request" msgstr "" #: qemud/remote.c:2891 msgid "cannot get peer socket identity" msgstr "" #: qemud/remote.c:2896 #, c-format msgid "Checking PID %d running as %d" msgstr "" #: qemud/remote.c:2901 #, c-format msgid "Failed to lookup policy kit caller: %s" msgstr "" #: qemud/remote.c:2909 #, fuzzy, c-format msgid "Failed to create polkit action %s\n" msgstr "비활성화 도메인 %s 생성 실패\n" #: qemud/remote.c:2919 #, fuzzy, c-format msgid "Failed to create polkit context %s\n" msgstr "비활성화 도메인 %s 생성 실패\n" #: qemud/remote.c:2939 #, c-format msgid "Policy kit failed to check authorization %d %s" msgstr "" #: qemud/remote.c:2955 #, c-format msgid "Policy kit denied action %s from pid %d, uid %d, result: %s\n" msgstr "" #: qemud/remote.c:2963 #, c-format msgid "Policy allowed action %s from pid %d, uid %d, result %s" msgstr "" #: qemud/remote.c:2982 msgid "client tried unsupported PolicyKit init request" msgstr "" #: qemud/remote.c:3037 msgid "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX" msgstr "" #: qemud/remote.c:3091 qemud/remote.c:3151 qemud/remote.c:3176 #: qemud/remote.c:3200 qemud/remote.c:3224 qemud/remote.c:3249 #: qemud/remote.c:3280 qemud/remote.c:3306 qemud/remote.c:3389 #: qemud/remote.c:3413 qemud/remote.c:3473 qemud/remote.c:3509 #: qemud/remote.c:3540 qemud/remote.c:3676 #, fuzzy msgid "storage_pool not found" msgstr "네트워크를 찾을 수 없음" #: qemud/remote.c:3467 msgid "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX" msgstr "" #: qemud/remote.c:3566 qemud/remote.c:3591 qemud/remote.c:3621 #: qemud/remote.c:3648 #, fuzzy msgid "storage_vol not found" msgstr "네트워크를 찾을 수 없음" #: qemud/remote.c:3760 qemud/remote.c:3912 msgid "maxnames > REMOTE_NODE_DEVICE_NAME_LIST_MAX" msgstr "" #: qemud/remote.c:3815 qemud/remote.c:3843 qemud/remote.c:3883 #: qemud/remote.c:3906 #, fuzzy msgid "node_device not found" msgstr "도메인을 찾을 수 없음" #: qemud/remote.c:4002 #, fuzzy msgid "Invalid Client" msgstr "잘못된 인수" #: qemud/remote.c:4018 msgid "xdr_int failed (1)" msgstr "" #: qemud/remote.c:4041 #, fuzzy msgid "xdr_setpos failed" msgstr "작업 실패" #: qemud/remote.c:4047 msgid "xdr_int failed (2)" msgstr "" #: src/conf.c:164 src/conf.c:212 src/conf.c:491 src/conf.c:528 src/conf.c:555 #: src/conf.c:630 msgid "allocating configuration" msgstr "설정 할당 중" #: src/conf.c:347 msgid "unterminated number" msgstr "종료되지 않은 숫자" #: src/conf.c:380 src/conf.c:396 src/conf.c:407 msgid "unterminated string" msgstr "종료되지 않은 문자열" #: src/conf.c:434 src/conf.c:487 msgid "expecting a value" msgstr "값 예상하기" #: src/conf.c:454 msgid "expecting a separator in list" msgstr "목록에 있는 분리자 예상하기" #: src/conf.c:477 #, fuzzy msgid "list is not closed with ]" msgstr "목록이 ]로 종료되지 않음" #: src/conf.c:521 msgid "expecting a name" msgstr "이름 예상하기" #: src/conf.c:582 msgid "expecting a separator" msgstr "분리자 예상하기" #: src/conf.c:613 msgid "expecting an assignment" msgstr "할당 예상하기" #: src/conf.c:892 src/conf.c:948 src/xend_internal.c:535 #: src/xend_internal.c:2623 src/xm_internal.c:1512 src/xm_internal.c:1519 #, fuzzy msgid "allocate buffer" msgstr "새 버퍼 할당" #: src/conf.c:899 msgid "failed to open file" msgstr "파일 열기 실패" #: src/conf.c:910 msgid "failed to save content" msgstr "내용 저장 실패" #: src/console.c:75 #, fuzzy, c-format msgid "unable to open tty %s: %s\n" msgstr "'%s' 열기 실패: %s" #: src/console.c:86 #, c-format msgid "unable to get tty attributes: %s\n" msgstr "" #: src/console.c:95 #, c-format msgid "unable to set tty attributes: %s\n" msgstr "" #: src/console.c:130 #, c-format msgid "failure waiting for I/O: %s\n" msgstr "" #: src/console.c:145 #, c-format msgid "failure reading input: %s\n" msgstr "" #: src/console.c:167 #, c-format msgid "failure writing output: %s\n" msgstr "" #: src/datatypes.c:123 msgid "allocating connection" msgstr "연결 할당 중" #: src/datatypes.c:264 src/datatypes.c:269 msgid "allocating domain" msgstr "도메인 할당 중" #: src/datatypes.c:280 msgid "failed to add domain to connection hash table" msgstr "해시 테이블 연결에 도메인 추가 실패" #: src/datatypes.c:321 msgid "domain missing from connection hash table" msgstr "해시 테이블 연결에서 도메인 부재" #: src/datatypes.c:404 src/datatypes.c:409 msgid "allocating network" msgstr "네트워크 할당 중" #: src/datatypes.c:419 msgid "failed to add network to connection hash table" msgstr "해시 테이블 연결에 네트워크 추가 실패" #: src/datatypes.c:457 msgid "network missing from connection hash table" msgstr "해시 테이블 연결에서 네트워크 부재" #: src/datatypes.c:541 src/datatypes.c:546 #, fuzzy msgid "allocating storage pool" msgstr "네트워크 할당 중" #: src/datatypes.c:556 #, fuzzy msgid "failed to add storage pool to connection hash table" msgstr "해시 테이블 연결에 네트워크 추가 실패" #: src/datatypes.c:595 #, fuzzy msgid "pool missing from connection hash table" msgstr "해시 테이블 연결에서 도메인 부재" #: src/datatypes.c:672 src/datatypes.c:677 src/datatypes.c:682 #, fuzzy msgid "allocating storage vol" msgstr "네트워크 할당 중" #: src/datatypes.c:692 #, fuzzy msgid "failed to add storage vol to connection hash table" msgstr "해시 테이블 연결에 네트워크 추가 실패" #: src/datatypes.c:732 #, fuzzy msgid "vol missing from connection hash table" msgstr "해시 테이블 연결에서 도메인 부재" #: src/datatypes.c:809 #, fuzzy msgid "allocating node dev" msgstr "네트워크 할당 중" #: src/datatypes.c:816 #, fuzzy msgid "copying node dev name" msgstr "노드 내용 복사 중" #: src/datatypes.c:822 #, fuzzy msgid "failed to add node dev to conn hash table" msgstr "해시 테이블 연결에 네트워크 추가 실패" #: src/datatypes.c:860 #, fuzzy msgid "dev missing from connection hash table" msgstr "해시 테이블 연결에서 도메인 부재" #: src/domain_conf.c:532 #, fuzzy, c-format msgid "unknown disk type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/domain_conf.c:576 #, fuzzy, c-format msgid "unknown disk device '%s'" msgstr "디스크 장치의 소스" #: src/domain_conf.c:602 #, c-format msgid "Invalid floppy device name: %s" msgstr "" #: src/domain_conf.c:617 #, c-format msgid "Invalid harddisk device name: %s" msgstr "" #: src/domain_conf.c:624 #, fuzzy, c-format msgid "unknown disk bus type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/domain_conf.c:649 #, c-format msgid "Invalid bus type '%s' for floppy disk" msgstr "" #: src/domain_conf.c:655 #, c-format msgid "Invalid bus type '%s' for disk" msgstr "" #: src/domain_conf.c:707 #, fuzzy, c-format msgid "unknown filesystem type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/domain_conf.c:800 #, fuzzy, c-format msgid "unknown interface type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/domain_conf.c:864 msgid "" "No 'network' attribute specified with " msgstr "" #: src/domain_conf.c:890 msgid "No 'dev' attribute specified with " msgstr "" #: src/domain_conf.c:902 msgid "No 'port' attribute specified with socket interface" msgstr "" #: src/domain_conf.c:907 msgid "Cannot parse 'port' attribute with socket interface" msgstr "" #: src/domain_conf.c:915 msgid "No 'address' attribute specified with socket interface" msgstr "" #: src/domain_conf.c:940 msgid "Model name contains invalid characters" msgstr "" #: src/domain_conf.c:1113 src/domain_conf.c:1190 #, fuzzy msgid "Missing source path attribute for char device" msgstr "장치의 소스 정보 부재" #: src/domain_conf.c:1130 src/domain_conf.c:1147 #, fuzzy msgid "Missing source host attribute for char device" msgstr "장치의 소스 정보 부재" #: src/domain_conf.c:1135 src/domain_conf.c:1152 src/domain_conf.c:1172 #, fuzzy msgid "Missing source service attribute for char device" msgstr "장치의 소스 정보 부재" #: src/domain_conf.c:1242 #, fuzzy msgid "missing input device type" msgstr "대상 장치 유형" #: src/domain_conf.c:1248 #, fuzzy, c-format msgid "unknown input device type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/domain_conf.c:1255 #, fuzzy, c-format msgid "unknown input bus type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/domain_conf.c:1263 #, c-format msgid "ps2 bus does not support %s input device" msgstr "" #: src/domain_conf.c:1269 src/domain_conf.c:1276 #, c-format msgid "unsupported input bus %s" msgstr "" #: src/domain_conf.c:1281 #, c-format msgid "xen bus does not support %s input device" msgstr "" #: src/domain_conf.c:1326 #, fuzzy msgid "missing graphics device type" msgstr "root 장치 정보 부재" #: src/domain_conf.c:1332 #, fuzzy, c-format msgid "unknown graphics device type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/domain_conf.c:1343 #, c-format msgid "cannot parse vnc port %s" msgstr "" #: src/domain_conf.c:1401 #, fuzzy, c-format msgid "unknown sound model '%s'" msgstr "알려지지 않은 명령: '%s'" #: src/domain_conf.c:1434 #, c-format msgid "cannot parse vendor id %s" msgstr "" #: src/domain_conf.c:1441 msgid "usb vendor needs id" msgstr "" #: src/domain_conf.c:1451 #, c-format msgid "cannot parse product %s" msgstr "" #: src/domain_conf.c:1458 msgid "usb product needs id" msgstr "" #: src/domain_conf.c:1469 #, c-format msgid "cannot parse bus %s" msgstr "" #: src/domain_conf.c:1476 msgid "usb address needs bus id" msgstr "" #: src/domain_conf.c:1485 #, fuzzy, c-format msgid "cannot parse device %s" msgstr "대상 장치 유형" #: src/domain_conf.c:1493 msgid "usb address needs device id" msgstr "" #: src/domain_conf.c:1498 #, fuzzy, c-format msgid "unknown usb source type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/domain_conf.c:1508 #, fuzzy msgid "missing vendor" msgstr "부재 \"" #: src/domain_conf.c:1514 #, fuzzy msgid "missing product" msgstr "부재 \"" #: src/domain_conf.c:1542 #, fuzzy, c-format msgid "unknown hostdev mode '%s'" msgstr "알려지지 않은 호스트 %s" #: src/domain_conf.c:1553 #, fuzzy, c-format msgid "unknown host device type '%s'" msgstr "알려지지 않은 호스트 %s" #: src/domain_conf.c:1558 #, fuzzy msgid "missing type in hostdev" msgstr "장치의 대상 정보 부재" #: src/domain_conf.c:1573 #, fuzzy, c-format msgid "unknown node %s" msgstr "알려지지 않은 호스트 %s" #: src/domain_conf.c:1604 #, c-format msgid "unknown lifecycle action %s" msgstr "" #: src/domain_conf.c:1633 src/domain_conf.c:2238 src/domain_conf.c:2279 #: src/network_conf.c:462 src/network_conf.c:502 src/storage_conf.c:631 #: src/storage_conf.c:1027 #, fuzzy msgid "missing root element" msgstr "root 장치 정보 부재" #: src/domain_conf.c:1668 #, fuzzy msgid "unknown device type" msgstr "알려지지 않은 OS 유형" #: src/domain_conf.c:1703 #, fuzzy msgid "failed to allocate space for xmlXPathContext" msgstr "노드 할당 실패" #: src/domain_conf.c:1711 #, fuzzy msgid "missing domain type attribute" msgstr "도메인 이름 정보 부재" #: src/domain_conf.c:1717 #, fuzzy, c-format msgid "invalid domain type %s" msgstr "%s에 있는 잘못된 도메인 포인터" #: src/domain_conf.c:1734 src/network_conf.c:317 #, fuzzy, c-format msgid "Failed to generate UUID: %s" msgstr "네트워크 UUID 보기 실패" #: src/domain_conf.c:1741 src/network_conf.c:324 src/storage_conf.c:454 msgid "malformed uuid element" msgstr "" #: src/domain_conf.c:1750 msgid "missing memory element" msgstr "" #: src/domain_conf.c:1780 #, fuzzy, c-format msgid "unexpected feature %s" msgstr "예상외의 데이터 '%s'" #: src/domain_conf.c:1820 #, fuzzy msgid "no OS type" msgstr "알려지지 않은 OS 유형" #: src/domain_conf.c:1849 src/xm_internal.c:698 #, c-format msgid "no supported architecture for os type '%s'" msgstr "" #: src/domain_conf.c:1899 #, fuzzy msgid "cannot extract boot device" msgstr "인터페이스 장치" #: src/domain_conf.c:1907 #, fuzzy msgid "missing boot device" msgstr "root 장치 정보 부재" #: src/domain_conf.c:1912 #, fuzzy, c-format msgid "unknown boot device '%s'" msgstr "알려지지 않은 호스트 %s" #: src/domain_conf.c:1932 #, fuzzy msgid "cannot extract disk devices" msgstr "디스크 장치 부착" #: src/domain_conf.c:1952 msgid "cannot extract filesystem devices" msgstr "" #: src/domain_conf.c:1970 #, fuzzy msgid "cannot extract network devices" msgstr "네트워크 인터페이스 부착" #: src/domain_conf.c:1990 msgid "cannot extract parallel devices" msgstr "" #: src/domain_conf.c:2009 #, fuzzy msgid "cannot extract serial devices" msgstr "인터페이스 장치" #: src/domain_conf.c:2057 #, fuzzy msgid "cannot extract input devices" msgstr "디스크 장치 부착" #: src/domain_conf.c:2091 #, fuzzy msgid "cannot extract graphics devices" msgstr "디스크 장치 부착" #: src/domain_conf.c:2132 #, fuzzy msgid "cannot extract sound devices" msgstr "디스크 장치 부착" #: src/domain_conf.c:2161 #, fuzzy msgid "cannot extract host devices" msgstr "디스크 장치 부착" #: src/domain_conf.c:2202 src/network_conf.c:427 src/storage_conf.c:585 #, c-format msgid "at line %d: %s" msgstr "" #: src/domain_conf.c:2232 src/domain_conf.c:2273 src/network_conf.c:456 #: src/network_conf.c:496 src/storage_conf.c:617 src/storage_conf.c:1013 #, fuzzy msgid "failed to parse xml document" msgstr "내용 저장 실패" #: src/domain_conf.c:2302 src/network_conf.c:524 msgid "incorrect root element" msgstr "" #: src/domain_conf.c:2511 msgid "topology cpuset syntax error" msgstr "" #: src/domain_conf.c:2525 #, fuzzy, c-format msgid "unexpected lifecycle type %d" msgstr "예상외의 mime 유형" #: src/domain_conf.c:2546 #, fuzzy, c-format msgid "unexpected disk type %d" msgstr "예상외의 mime 유형" #: src/domain_conf.c:2551 #, fuzzy, c-format msgid "unexpected disk device %d" msgstr "예상외의 dict 노드" #: src/domain_conf.c:2556 #, fuzzy, c-format msgid "unexpected disk bus %d" msgstr "예상외의 dict 노드" #: src/domain_conf.c:2606 #, fuzzy, c-format msgid "unexpected filesystem type %d" msgstr "예상외의 mime 유형" #: src/domain_conf.c:2657 src/domain_conf.c:2871 #, fuzzy, c-format msgid "unexpected net type %d" msgstr "예상외의 mime 유형" #: src/domain_conf.c:2725 #, fuzzy, c-format msgid "unexpected char type %d" msgstr "예상외의 mime 유형" #: src/domain_conf.c:2824 src/xend_internal.c:5180 #, fuzzy, c-format msgid "unexpected sound model %d" msgstr "예상외의 dict 노드" #: src/domain_conf.c:2844 src/xend_internal.c:5202 #, fuzzy, c-format msgid "unexpected input type %d" msgstr "예상외의 mime 유형" #: src/domain_conf.c:2849 #, fuzzy, c-format msgid "unexpected input bus type %d" msgstr "예상외의 mime 유형" #: src/domain_conf.c:2931 #, fuzzy, c-format msgid "unexpected hostdev mode %d" msgstr "예상외의 dict 노드" #: src/domain_conf.c:2938 #, fuzzy, c-format msgid "unexpected hostdev type %d" msgstr "예상외의 mime 유형" #: src/domain_conf.c:2976 #, fuzzy, c-format msgid "unexpected domain type %d" msgstr "예상외의 mime 유형" #: src/domain_conf.c:3061 #, fuzzy, c-format msgid "unexpected boot device type %d" msgstr "예상외의 mime 유형" #: src/domain_conf.c:3079 #, fuzzy, c-format msgid "unexpected feature %d" msgstr "예상외의 값 노드" #: src/domain_conf.c:3205 src/network_conf.c:655 src/storage_conf.c:1369 #, c-format msgid "cannot create config directory %s: %s" msgstr "" #: src/domain_conf.c:3214 src/network_conf.c:671 src/storage_conf.c:1412 #, fuzzy, c-format msgid "cannot create config file %s: %s" msgstr "설정 파일 쓰기 실패: %s" #: src/domain_conf.c:3222 src/network_conf.c:679 src/storage_conf.c:1420 #, fuzzy, c-format msgid "cannot write config file %s: %s" msgstr "설정 파일 쓰기 실패: %s" #: src/domain_conf.c:3229 src/network_conf.c:686 src/storage_conf.c:1427 #, c-format msgid "cannot save config file %s: %s" msgstr "" #: src/domain_conf.c:3308 src/network_conf.c:767 #, fuzzy, c-format msgid "Failed to open dir '%s': %s" msgstr "'%s' 열기 실패: %s" #: src/domain_conf.c:3360 src/network_conf.c:807 #, c-format msgid "cannot remove config for %s: %s" msgstr "" #: src/domain_conf.c:3434 #, fuzzy msgid "unknown virt type" msgstr "알려지지 않은 OS 유형" #: src/domain_conf.c:3445 #, c-format msgid "no emulator for domain %s os type %s on architecture %s" msgstr "" #: src/iptables.c:102 #, fuzzy msgid "Failed to run '" msgstr "XML 생성하기 실패" #: src/iptables.c:150 #, fuzzy msgid "Failed to read " msgstr "XML 생성하기 실패" #: src/iptables.c:178 #, fuzzy msgid "Failed to write to " msgstr "소켓 %d에 쓰기 실패\n" #: src/iptables.c:243 #, fuzzy, c-format msgid "Failed to create directory %s : %s" msgstr "%s에서 네트워크 생성하기 실패" #: src/iptables.c:249 #, fuzzy, c-format msgid "Failed to saves iptables rules to %s : %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/iptables.c:553 #, c-format msgid "Failed to remove iptables rule '%s' from chain '%s' in table '%s': %s" msgstr "" #: src/iptables.c:562 #, c-format msgid "Failed to add iptables rule '%s' to chain '%s' in table '%s': %s" msgstr "" #: src/libvirt.c:808 #, fuzzy msgid "could not parse connection URI" msgstr "%s에 연결할 수 없음" #: src/libvirt.c:938 #, fuzzy msgid "unable to open connection" msgstr "%s에 연결할 수 없음" #: src/libvirt.c:2316 #, fuzzy msgid "domainMigratePrepare did not set uri" msgstr "도메인 정보가 수치가 아닌 잘못된 domid임" #: src/libvirt.c:2345 #, fuzzy msgid "domainMigratePrepare2 did not set uri" msgstr "도메인 정보가 수치가 아닌 잘못된 domid임" #: src/libvirt.c:2890 msgid "path is NULL" msgstr "" #: src/libvirt.c:2896 msgid "flags must be zero" msgstr "" #: src/libvirt.c:2903 msgid "buffer is NULL" msgstr "" #: src/libvirt.c:2986 msgid "flags parameter must be VIR_MEMORY_VIRTUAL" msgstr "" #: src/libvirt.c:2993 msgid "buffer is NULL but size is non-zero" msgstr "" #: src/lxc_conf.c:87 msgid "while loading LXC driver config" msgstr "" #: src/lxc_container.c:122 #, fuzzy, c-format msgid "setsid failed: %s" msgstr "작업 실패: %s" #: src/lxc_container.c:128 #, c-format msgid "ioctl(TIOCSTTY) failed: %s" msgstr "" #: src/lxc_container.c:141 #, fuzzy, c-format msgid "dup2(stdin) failed: %s" msgstr "작업 실패: %s" #: src/lxc_container.c:147 #, fuzzy, c-format msgid "dup2(stdout) failed: %s" msgstr "작업 실패: %s" #: src/lxc_container.c:153 #, fuzzy, c-format msgid "dup2(stderr) failed: %s" msgstr "작업 실패: %s" #: src/lxc_container.c:181 #, c-format msgid "unable to send container continue message: %s" msgstr "" #: src/lxc_container.c:211 #, fuzzy, c-format msgid "Failed to read the container continue message: %s" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/lxc_container.c:275 #, fuzzy, c-format msgid "failed to bind new root %s: %s" msgstr "네트워크 찾기 실패: %s" #: src/lxc_container.c:289 #, fuzzy, c-format msgid "failed to create %s: %s" msgstr "XML 생성하기 실패" #: src/lxc_container.c:299 #, fuzzy, c-format msgid "failed to pivot root %s to %s: %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/lxc_container.c:333 #, fuzzy, c-format msgid "failed to mount /dev tmpfs for container: %s" msgstr "도메인 %s를 정의하지 않기 실패" #: src/lxc_container.c:347 #, fuzzy, c-format msgid "failed to move /dev/pts into container: %s" msgstr "%s 도메인 강제 종료 실패 " #: src/lxc_container.c:358 #, fuzzy, c-format msgid "failed to make device %s: %s" msgstr "%s에서 장치 부착하기 실패" #: src/lxc_container.c:390 src/lxc_container.c:497 #, fuzzy, c-format msgid "failed to mount %s at %s for container: %s" msgstr "읽기 용 %s 열기 실패" #: src/lxc_container.c:411 #, fuzzy, c-format msgid "failed to read /proc/mounts: %s" msgstr "소켓 %d에 읽기 실패\n" #: src/lxc_container.c:438 #, fuzzy, c-format msgid "failed to unmount %s: %s" msgstr "'%s' 열기 실패: %s" #: src/lxc_container.c:463 src/lxc_container.c:506 #, fuzzy, c-format msgid "failed to mount /proc for container: %s" msgstr "읽기 용 %s 열기 실패" #: src/lxc_container.c:552 msgid "lxcChild() passed invalid vm definition" msgstr "" #: src/lxc_container.c:562 #, fuzzy, c-format msgid "open(%s) failed: %s" msgstr "작업 실패: %s" #: src/lxc_container.c:623 #, fuzzy, c-format msgid "clone() failed, %s" msgstr "작업 실패: %s" #: src/lxc_controller.c:83 #, fuzzy, c-format msgid "Unable to create cgroup for %s\n" msgstr "%s에서 도메인 생성하기 실패" #: src/lxc_controller.c:113 #, fuzzy, c-format msgid "Failed to set lxc resources: %s\n" msgstr "소켓 %d를 닫기 실패\n" #: src/lxc_controller.c:140 #, fuzzy, c-format msgid "failed to create server socket %s: %s" msgstr "소켓 %d에 읽기 실패\n" #: src/lxc_controller.c:152 #, fuzzy, c-format msgid "failed to bind server socket %s: %s" msgstr "소켓 %d에 읽기 실패\n" #: src/lxc_controller.c:158 #, fuzzy, c-format msgid "failed to listen server socket %s: %s" msgstr "소켓 %d를 닫기 실패\n" #: src/lxc_controller.c:192 #, fuzzy, c-format msgid "read of fd %d failed: %s" msgstr "작업 실패: %s" #: src/lxc_controller.c:198 #, fuzzy, c-format msgid "write to fd %d failed: %s" msgstr "작업 실패: %s" #: src/lxc_controller.c:249 #, fuzzy, c-format msgid "epoll_create(2) failed: %s" msgstr "작업 실패: %s" #: src/lxc_controller.c:259 #, c-format msgid "epoll_ctl(appPty) failed: %s" msgstr "" #: src/lxc_controller.c:265 src/lxc_controller.c:273 src/lxc_controller.c:281 #: src/lxc_controller.c:301 src/lxc_controller.c:307 #, fuzzy, c-format msgid "epoll_ctl(contPty) failed: %s" msgstr "작업 실패: %s" #: src/lxc_controller.c:324 #, c-format msgid "error event %d" msgstr "" #: src/lxc_controller.c:345 #, fuzzy, c-format msgid "epoll_wait() failed: %s" msgstr "작업 실패: %s" #: src/lxc_controller.c:395 #, fuzzy, c-format msgid "failed to move interface %s to ns %d" msgstr "%s %s 인터페이스 상태 보기 실패" #: src/lxc_controller.c:420 #, fuzzy, c-format msgid "failed to delete veth: %s" msgstr "'%s' 네트워크 보기 실패" #: src/lxc_controller.c:443 #, fuzzy, c-format msgid "sockpair failed: %s" msgstr "작업 실패: %s" #: src/lxc_controller.c:451 src/lxc_driver.c:766 #, fuzzy, c-format msgid "failed to allocate tty: %s" msgstr "노드 할당 실패" #: src/lxc_controller.c:617 #, fuzzy, c-format msgid "Unable to write pid file: %s\n" msgstr "로그 파일 쓰기 실패" #: src/lxc_controller.c:630 #, fuzzy, c-format msgid "Unable to change to root dir: %s\n" msgstr "최대 메모리 크기를 변경할 수 없음" #: src/lxc_controller.c:636 #, c-format msgid "Unable to become session leader: %s\n" msgstr "" #: src/lxc_controller.c:644 #, fuzzy, c-format msgid "Failed connection from LXC driver: %s\n" msgstr "%s에 있는 잘못된 연결 포인터" #: src/lxc_driver.c:193 src/network_driver.c:872 src/network_driver.c:905 #: src/qemu_driver.c:2338 src/uml_driver.c:1347 #, fuzzy msgid "failed to allocate space for VM name string" msgstr "노드 할당 실패" #: src/lxc_driver.c:233 src/lxc_driver.c:871 src/lxc_driver.c:906 msgid "System lacks NETNS support" msgstr "" #: src/lxc_driver.c:266 src/lxc_driver.c:301 src/lxc_driver.c:327 #: src/lxc_driver.c:342 src/openvz_driver.c:246 src/openvz_driver.c:275 #: src/openvz_driver.c:291 src/openvz_driver.c:318 src/openvz_driver.c:748 #: src/openvz_driver.c:779 src/openvz_driver.c:800 src/openvz_driver.c:841 #: src/qemu_driver.c:1676 src/qemu_driver.c:1763 src/qemu_driver.c:2318 #: src/qemu_driver.c:2371 src/qemu_driver.c:2432 src/qemu_driver.c:2523 #: src/qemu_driver.c:2640 src/qemu_driver.c:2716 src/qemu_driver.c:2784 #: src/qemu_driver.c:2841 src/qemu_driver.c:2903 src/qemu_driver.c:2980 #: src/qemu_driver.c:3017 src/qemu_driver.c:3035 src/qemu_driver.c:3285 #: src/uml_driver.c:1212 src/uml_driver.c:1299 src/uml_driver.c:1327 #: src/uml_driver.c:1379 src/uml_driver.c:1423 src/uml_driver.c:1457 #: src/uml_driver.c:1475 src/uml_driver.c:1544 #, fuzzy msgid "no domain with matching uuid" msgstr "도메인 id 또는 uuid" #: src/lxc_driver.c:272 src/openvz_driver.c:753 src/qemu_driver.c:2438 #: src/uml_driver.c:1429 #, fuzzy msgid "cannot delete active domain" msgstr "비활성화 도메인명" #: src/lxc_driver.c:278 src/qemu_driver.c:2444 src/uml_driver.c:1435 #, fuzzy msgid "cannot undefine transient domain" msgstr "비활성화 도메인을 정의하지 않음" #: src/lxc_driver.c:379 #, c-format msgid "waitpid failed to wait for container %d: %d %s" msgstr "" #: src/lxc_driver.c:461 #, fuzzy msgid "failed to get bridge for interface" msgstr "네트워크 인터페이스를 연결하기 위해 사용된 스크립트" #: src/lxc_driver.c:472 #, fuzzy, c-format msgid "failed to create veth device pair: %d" msgstr "%s에서 장치 부착하기 실패" #: src/lxc_driver.c:485 #, fuzzy msgid "failed to allocate veth names" msgstr "노드 할당 실패" #: src/lxc_driver.c:491 #, fuzzy, c-format msgid "failed to add %s device to %s: %s" msgstr "%s에서 장치 부착하기 실패" #: src/lxc_driver.c:500 #, fuzzy, c-format msgid "failed to enable parent ns veth device: %d" msgstr "%s에서 장치 부착하기 실패" #: src/lxc_driver.c:530 #, fuzzy, c-format msgid "failed to create client socket: %s" msgstr "소켓 %d에 쓰기 실패\n" #: src/lxc_driver.c:541 #, fuzzy, c-format msgid "failed to connect to client socket: %s" msgstr "Xen Store에 연결 실패" #: src/lxc_driver.c:567 #, fuzzy, c-format msgid "invalid PID %d for container" msgstr "잘못된 도메인 포인터" #: src/lxc_driver.c:574 #, fuzzy, c-format msgid "failed to kill pid %d: %s" msgstr "'%s' 열기 실패: %s" #: src/lxc_driver.c:697 src/util.c:589 #, c-format msgid "cannot wait for '%s': %s" msgstr "" #: src/lxc_driver.c:704 #, c-format msgid "container '%s' unexpectedly shutdown during startup" msgstr "" #: src/lxc_driver.c:752 src/qemu_driver.c:838 #, c-format msgid "cannot create log directory %s: %s" msgstr "" #: src/lxc_driver.c:790 #, fuzzy, c-format msgid "failed to open %s: %s" msgstr "'%s' 열기 실패: %s" #: src/lxc_driver.c:810 #, fuzzy, c-format msgid "Failed to read pid file %s/%s.pid: %s" msgstr "'%s' 열기 실패: %s" #: src/lxc_driver.c:865 #, fuzzy, c-format msgid "no domain named %s" msgstr "도메인명" #: src/lxc_driver.c:945 src/lxc_driver.c:968 #, fuzzy, c-format msgid "no domain with id %d" msgstr "노드 도메인 목록" #: src/lxc_driver.c:1125 #, c-format msgid "uname(): %s" msgstr "" #: src/lxc_driver.c:1131 #, fuzzy, c-format msgid "Unknown release: %s" msgstr "알려지지 않은 호스트 %s" #: src/lxc_driver.c:1164 src/lxc_driver.c:1213 #, fuzzy, c-format msgid "No such domain %s" msgstr "도메인 %s를 다시 시작하기 실패" #: src/lxc_driver.c:1179 #, fuzzy, c-format msgid "Invalid parameter `%s'" msgstr "%s에 있는 잘못된 인수" #: src/lxc_driver.c:1206 #, fuzzy msgid "Invalid parameter count" msgstr "잘못된 인수" #: src/network_conf.c:242 #, fuzzy, c-format msgid "cannot parse MAC address '%s'" msgstr "잘못된 MAC 주소: %s" #: src/network_conf.c:249 #, c-format msgid "cannot use name address '%s'" msgstr "" #: src/network_conf.c:265 src/network_conf.c:353 #, c-format msgid "cannot parse IP address '%s'" msgstr "" #: src/network_conf.c:359 #, c-format msgid "cannot parse netmask '%s'" msgstr "" #: src/network_conf.c:383 msgid "Forwarding requested, but no IPv4 address/netmask provided" msgstr "" #: src/network_conf.c:391 #, fuzzy, c-format msgid "unknown forwarding type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/network_conf.c:662 src/network_driver.c:1095 src/qemu_driver.c:3060 #: src/storage_driver.c:813 src/uml_driver.c:1500 #, c-format msgid "cannot create autostart directory %s: %s" msgstr "" #: src/network_conf.c:733 #, c-format msgid "Network config filename '%s' does not match network name '%s'" msgstr "" #: src/network_conf.c:798 src/storage_conf.c:1448 #, fuzzy, c-format msgid "no config file for %s" msgstr "설정 파일 구문 오류: %s" #: src/network_driver.c:102 #, fuzzy, c-format msgid "Failed to autostart network '%s': %s\n" msgstr "%s 네트워크 시작 실패" #: src/network_driver.c:132 src/qemu_driver.c:190 src/uml_driver.c:294 #, fuzzy, c-format msgid "Failed to find user record for uid '%d': %s\n" msgstr "네트워크 찾기 실패: %s" #: src/network_driver.c:143 #, fuzzy msgid "out of memory in asprintf\n" msgstr "메모리 부족" #: src/network_driver.c:173 #, fuzzy msgid "networkStartup: out of memory\n" msgstr "메모리 부족" #: src/network_driver.c:197 msgid "Reloading iptables rules\n" msgstr "" #: src/network_driver.c:382 #, fuzzy msgid "failed to allocate space for dnsmasq argv" msgstr "노드 할당 실패" #: src/network_driver.c:396 msgid "cannot start dhcp daemon without IP address for server" msgstr "" #: src/network_driver.c:425 #, c-format msgid "failed to add iptables rule to allow forwarding from '%s' : %s\n" msgstr "" #: src/network_driver.c:436 #, c-format msgid "failed to add iptables rule to allow forwarding to '%s' : %s\n" msgstr "" #: src/network_driver.c:446 #, c-format msgid "failed to add iptables rule to enable masquerading : %s\n" msgstr "" #: src/network_driver.c:478 #, c-format msgid "failed to add iptables rule to allow routing from '%s' : %s\n" msgstr "" #: src/network_driver.c:489 #, c-format msgid "failed to add iptables rule to allow routing to '%s' : %s\n" msgstr "" #: src/network_driver.c:514 #, fuzzy msgid "failed to allocate space for IP tables support" msgstr "노드 할당 실패" #: src/network_driver.c:522 src/network_driver.c:529 #, c-format msgid "failed to add iptables rule to allow DHCP requests from '%s' : %s" msgstr "" #: src/network_driver.c:537 src/network_driver.c:544 #, c-format msgid "failed to add iptables rule to allow DNS requests from '%s' : %s" msgstr "" #: src/network_driver.c:554 #, c-format msgid "failed to add iptables rule to block outbound traffic from '%s' : %s" msgstr "" #: src/network_driver.c:561 #, c-format msgid "failed to add iptables rule to block inbound traffic to '%s' : %s" msgstr "" #: src/network_driver.c:569 #, c-format msgid "failed to add iptables rule to allow cross bridge traffic on '%s' : %s" msgstr "" #: src/network_driver.c:670 #, fuzzy msgid "network is already active" msgstr "이미 도메인이 활성화됨" #: src/network_driver.c:676 src/qemu_conf.c:575 #, c-format msgid "cannot initialize bridge support: %s" msgstr "" #: src/network_driver.c:682 #, c-format msgid "cannot create bridge '%s' : %s" msgstr "" #: src/network_driver.c:697 #, c-format msgid "cannot set IP address on bridge '%s' to '%s' : %s" msgstr "" #: src/network_driver.c:705 #, c-format msgid "cannot set netmask on bridge '%s' to '%s' : %s" msgstr "" #: src/network_driver.c:713 #, fuzzy, c-format msgid "failed to bring the bridge '%s' up : %s" msgstr "'%s' 열기 실패: %s" #: src/network_driver.c:724 #, fuzzy, c-format msgid "failed to enable IP forwarding : %s" msgstr "읽기 용 %s 열기 실패" #: src/network_driver.c:742 src/network_driver.c:773 #, fuzzy, c-format msgid "Failed to bring down bridge '%s' : %s\n" msgstr "'%s' 열기 실패: %s" #: src/network_driver.c:748 src/network_driver.c:778 #, fuzzy, c-format msgid "Failed to delete bridge '%s' : %s\n" msgstr "'%s' 열기 실패: %s" #: src/network_driver.c:761 #, fuzzy, c-format msgid "Shutting down network '%s'\n" msgstr "'%s' 네트워크 보기 실패" #: src/network_driver.c:787 msgid "Got unexpected pid for dnsmasq\n" msgstr "" #: src/network_driver.c:815 src/network_driver.c:978 src/network_driver.c:1003 #: src/network_driver.c:1017 src/network_driver.c:1032 #: src/network_driver.c:1065 src/network_driver.c:1081 msgid "no network with matching uuid" msgstr "" #: src/network_driver.c:830 msgid "no network with matching name" msgstr "" #: src/network_driver.c:984 #, fuzzy msgid "network is still active" msgstr "네트워크가 아직 실행 중" #: src/network_driver.c:1045 #, fuzzy msgid "no network with matching id" msgstr "XML에 있는 네트워크 정보" #: src/network_driver.c:1052 #, fuzzy msgid "failed to allocate space for network bridge string" msgstr "노드 할당 실패" #: src/network_driver.c:1102 src/storage_driver.c:820 #, fuzzy, c-format msgid "Failed to create symlink '%s' to '%s': %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/network_driver.c:1109 src/qemu_driver.c:3074 src/storage_driver.c:829 #: src/uml_driver.c:1514 #, fuzzy, c-format msgid "Failed to delete symlink '%s': %s" msgstr "'%s' 열기 실패: %s" #: src/node_device.c:98 src/node_device.c:114 src/node_device.c:129 #: src/node_device.c:146 src/node_device.c:167 msgid "no node device with matching name" msgstr "" #: src/openvz_conf.c:129 #, fuzzy msgid "Cound not extract vzctl version" msgstr "실행중인 %s 하이퍼바이저 버전을 추출할 수 없음\n" #: src/openvz_conf.c:193 #, c-format msgid "Cound not read 'IP_ADDRESS' from config for container %d" msgstr "" #: src/openvz_conf.c:225 #, c-format msgid "Cound not read 'NETIF' from config for container %d" msgstr "" #: src/openvz_conf.c:252 #, fuzzy msgid "Too long network device name" msgstr "네트워크 파일명 해결 중" #: src/openvz_conf.c:266 msgid "Too long bridge device name" msgstr "" #: src/openvz_conf.c:280 #, fuzzy msgid "Wrong length MAC address" msgstr "잘못된 MAC 주소" #: src/openvz_conf.c:287 #, fuzzy msgid "Wrong MAC address" msgstr "MAC 주소" #: src/openvz_conf.c:323 #, c-format msgid "Cound not read 'OSTEMPLATE' from config for container %d" msgstr "" #: src/openvz_conf.c:378 #, fuzzy msgid "popen failed" msgstr "작업 실패" #: src/openvz_conf.c:388 msgid "Failed to parse vzlist output" msgstr "" #: src/openvz_conf.c:414 msgid "UUID in config file malformed" msgstr "" #: src/openvz_conf.c:426 #, c-format msgid "Cound not read config for container %d" msgstr "" #: src/openvz_conf.c:469 msgid "Cound not read nodeinfo" msgstr "" #: src/openvz_driver.c:97 #, fuzzy msgid "Container is not defined" msgstr "도메인 %s는 정의되지 않음\n" #: src/openvz_driver.c:125 msgid "only filesystem templates are supported" msgstr "" #: src/openvz_driver.c:131 msgid "only one filesystem supported" msgstr "" #: src/openvz_driver.c:149 src/openvz_driver.c:495 #, fuzzy, c-format msgid "Could not put argument to %s" msgstr "%s에 연결할 수 없음" #: src/openvz_driver.c:257 #, c-format msgid "cannot read cputime for domain %d" msgstr "" #: src/openvz_driver.c:297 src/openvz_driver.c:324 #, fuzzy msgid "domain is not in running state" msgstr "도메인이 아직 실행 중" #: src/openvz_driver.c:398 msgid "Container ID is not specified" msgstr "" #: src/openvz_driver.c:429 msgid "Could not generate eth name for container" msgstr "" #: src/openvz_driver.c:440 msgid "Could not generate veth name" msgstr "" #: src/openvz_driver.c:482 src/openvz_driver.c:593 src/openvz_driver.c:665 #: src/openvz_driver.c:682 src/openvz_driver.c:728 src/openvz_driver.c:759 #: src/openvz_driver.c:784 src/openvz_driver.c:860 src/openvz_driver.c:959 #: src/openvz_driver.c:1004 #, fuzzy, c-format msgid "Could not exec %s" msgstr "%s에 연결할 수 없음" #: src/openvz_driver.c:524 #, fuzzy msgid "Could not configure network" msgstr "%s에 연결할 수 없음" #: src/openvz_driver.c:535 msgid "cannot replace NETIF config" msgstr "" #: src/openvz_driver.c:573 #, c-format msgid "Already an OPENVZ VM active with the id '%s'" msgstr "" #: src/openvz_driver.c:585 src/openvz_driver.c:659 msgid "Error creating command for container" msgstr "" #: src/openvz_driver.c:599 src/openvz_driver.c:671 #, fuzzy msgid "Could not set UUID" msgstr "%s에 연결할 수 없음" #: src/openvz_driver.c:613 src/openvz_driver.c:697 #, fuzzy msgid "Could not set number of virtual cpu" msgstr "가상 CPU 수 변경" #: src/openvz_driver.c:647 #, c-format msgid "Already an OPENVZ VM defined with the id '%s'" msgstr "" #: src/openvz_driver.c:716 msgid "no domain with matching id" msgstr "" #: src/openvz_driver.c:722 msgid "domain is not in shutoff state" msgstr "" #: src/openvz_driver.c:805 #, fuzzy msgid "Could not read container config" msgstr "%s에 연결할 수 없음" #: src/openvz_driver.c:821 src/qemu_driver.c:1299 #, fuzzy, c-format msgid "unknown type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/openvz_driver.c:847 msgid "VCPUs should be >= 1" msgstr "" #: src/openvz_driver.c:968 src/openvz_driver.c:1013 #, fuzzy, c-format msgid "Could not parse VPS ID %s" msgstr "%s에 연결할 수 없음" #: src/proxy_internal.c:252 #, c-format msgid "Failed to close socket %d\n" msgstr "소켓 %d를 닫기 실패\n" #: src/proxy_internal.c:285 #, c-format msgid "Failed to read socket %d\n" msgstr "소켓 %d에 읽기 실패\n" #: src/proxy_internal.c:312 #, c-format msgid "Failed to write to socket %d\n" msgstr "소켓 %d에 쓰기 실패\n" #: src/proxy_internal.c:404 src/proxy_internal.c:425 src/proxy_internal.c:445 #, c-format msgid "Communication error with proxy: got %d bytes of %d\n" msgstr "proxy와의 통신 오류: %d의 %d바이트를 갖음\n" #: src/proxy_internal.c:412 #, c-format msgid "Communication error with proxy: expected %d bytes got %d\n" msgstr "proxy와의 통신 오류: 예상했던 %d 바이트가 %d를 갖음\n" #: src/proxy_internal.c:434 #, c-format msgid "Communication error with proxy: got %d bytes packet\n" msgstr "proxy와의 통신 오류: %d 바이트 패킷을 갖음\n" #: src/proxy_internal.c:458 msgid "Communication error with proxy: malformed packet\n" msgstr "proxy와의 통신 오류: 잘못된 패킷\n" #: src/proxy_internal.c:464 #, c-format msgid "got asynchronous packet number %d\n" msgstr "비동기식 패킷 번호 %d를 갖음\n" #: src/qemu_conf.c:73 #, fuzzy msgid "failed to allocate vncListen" msgstr "노드 할당 실패" #: src/qemu_conf.c:78 src/qemu_conf.c:113 #, fuzzy msgid "failed to allocate vncTLSx509certdir" msgstr "노드 할당 실패" #: src/qemu_conf.c:125 #, fuzzy msgid "failed to allocate vnc_listen" msgstr "노드 할당 실패" #: src/qemu_conf.c:477 #, c-format msgid "Unexpected exit status from qemu %d pid %lu" msgstr "" #: src/qemu_conf.c:486 #, c-format msgid "Unexpected exit status '%d', qemu probably failed" msgstr "" #: src/qemu_conf.c:509 src/qemu_driver.c:871 #, c-format msgid "Cannot find QEMU binary %s: %s" msgstr "" #: src/qemu_conf.c:541 #, fuzzy, c-format msgid "Network '%s' not found" msgstr "네트워크를 찾을 수 없음" #: src/qemu_conf.c:551 #, fuzzy, c-format msgid "Network '%s' is not active" msgstr "%s 네트워크 시작\n" #: src/qemu_conf.c:559 #, fuzzy, c-format msgid "Network type %d is not supported" msgstr "%s 네트워크 시작\n" #: src/qemu_conf.c:585 #, c-format msgid "Failed to add tap interface to bridge. %s is not a bridge device" msgstr "" #: src/qemu_conf.c:589 #, fuzzy, c-format msgid "Failed to add tap interface '%s' to bridge '%s' : %s" msgstr "%s %s 인터페이스 상태 보기 실패" #: src/qemu_conf.c:612 #, fuzzy msgid "failed to allocate space for tapfds string" msgstr "노드 할당 실패" #: src/qemu_conf.c:956 src/qemu_conf.c:1008 #, c-format msgid "unsupported usb disk type for '%s'" msgstr "" #: src/qemu_conf.c:964 src/qemu_conf.c:1027 src/uml_conf.c:335 #, fuzzy, c-format msgid "unsupported disk type '%s'" msgstr "예상외의 데이터 '%s'" #: src/qemu_conf.c:1245 msgid "invalid sound model" msgstr "" #: src/qemu_conf.c:1299 src/uml_conf.c:375 #, fuzzy msgid "failed to allocate space for argv string" msgstr "노드 할당 실패" #: src/qemu_driver.c:88 src/uml_driver.c:94 msgid "Failed to set close-on-exec file descriptor flag\n" msgstr "" #: src/qemu_driver.c:103 msgid "Failed to set non-blocking file descriptor flag\n" msgstr "" #: src/qemu_driver.c:148 src/uml_driver.c:125 #, fuzzy, c-format msgid "Failed to autostart VM '%s': %s\n" msgstr "'%s' 열기 실패: %s" #: src/qemu_driver.c:241 #, fuzzy msgid "qemudStartup: out of memory\n" msgstr "메모리 부족" #: src/qemu_driver.c:375 #, c-format msgid "" "QEMU quit during %s startup\n" "%s" msgstr "" #: src/qemu_driver.c:385 src/qemu_driver.c:398 #, c-format msgid "Failure while reading %s startup output: %s" msgstr "" #: src/qemu_driver.c:393 #, c-format msgid "Timed out while reading %s startup output" msgstr "" #: src/qemu_driver.c:409 #, c-format msgid "Failure while reading %s startup output" msgstr "" #: src/qemu_driver.c:421 #, c-format msgid "Out of space while reading %s startup output" msgstr "" #: src/qemu_driver.c:452 #, c-format msgid "Unable to open monitor path %s" msgstr "" #: src/qemu_driver.c:457 msgid "Unable to set monitor close-on-exec flag" msgstr "" #: src/qemu_driver.c:462 msgid "Unable to put monitor into non-blocking mode" msgstr "" #: src/qemu_driver.c:587 src/qemu_driver.c:993 src/qemu_driver.c:1163 #: src/qemu_driver.c:1173 #, c-format msgid "Unable to log VM console data: %s\n" msgstr "" #: src/qemu_driver.c:610 #, fuzzy msgid "allocate cpumap" msgstr "새 버퍼 할당" #: src/qemu_driver.c:621 msgid "cannot run monitor command to fetch CPU thread info" msgstr "" #: src/qemu_driver.c:726 #, fuzzy, c-format msgid "failed to set CPU affinity %s" msgstr "'%s' 도메인 보기 실패" #: src/qemu_driver.c:737 src/qemu_driver.c:1613 #, fuzzy msgid "resume operation failed" msgstr "작업 실패" #: src/qemu_driver.c:805 src/uml_driver.c:688 #, fuzzy msgid "VM is already active" msgstr "이미 도메인이 활성화됨" #: src/qemu_driver.c:815 msgid "Unable to find an unused VNC port" msgstr "" #: src/qemu_driver.c:827 #, c-format msgid "config file path too long: %s/%s.log" msgstr "" #: src/qemu_driver.c:846 src/uml_driver.c:724 #, fuzzy, c-format msgid "failed to create logfile %s: %s" msgstr "로그 파일 쓰기 실패" #: src/qemu_driver.c:852 src/uml_driver.c:733 #, c-format msgid "Unable to set VM logfile close-on-exec flag %s" msgstr "" #: src/qemu_driver.c:881 src/qemu_driver.c:2549 #, c-format msgid "Cannot determine QEMU argv syntax %s" msgstr "" #: src/qemu_driver.c:899 src/qemu_driver.c:902 src/uml_driver.c:749 #: src/uml_driver.c:752 #, fuzzy, c-format msgid "Unable to write envv to logfile %d: %s\n" msgstr "로그 파일 쓰기 실패" #: src/qemu_driver.c:909 src/qemu_driver.c:912 src/qemu_driver.c:917 #: src/uml_driver.c:759 src/uml_driver.c:762 src/uml_driver.c:767 #, fuzzy, c-format msgid "Unable to write argv to logfile %d: %s\n" msgstr "로그 파일 쓰기 실패" #: src/qemu_driver.c:1005 #, c-format msgid "Shutting down VM '%s'\n" msgstr "" #: src/qemu_driver.c:1016 #, fuzzy, c-format msgid "Unable to close logfile %d: %s\n" msgstr "소켓 %d를 닫기 실패\n" #: src/qemu_driver.c:1031 #, fuzzy msgid "Got unexpected pid, damn\n" msgstr "예상외의 dict 노드" #: src/qemu_driver.c:1270 #, fuzzy, c-format msgid "Unable to open %s: %s\n" msgstr "'%s' 열기 실패: %s" #: src/qemu_driver.c:1315 src/uml_driver.c:908 #, fuzzy msgid "failed to allocate space for capabilities support" msgstr "기능 전환 실패" #: src/qemu_driver.c:1334 src/qemu_driver.c:1360 src/uml_driver.c:927 #: src/uml_driver.c:953 msgid "NUMA not supported on this host" msgstr "" #: src/qemu_driver.c:1345 src/qemu_driver.c:1368 src/uml_driver.c:938 #: src/uml_driver.c:961 #, fuzzy msgid "Failed to query NUMA free memory" msgstr "사용된 메모리:" #: src/qemu_driver.c:1525 src/uml_driver.c:1126 #, fuzzy, c-format msgid "domain '%s' is already defined" msgstr "이미 %s 도메인이 존재함" #: src/qemu_driver.c:1536 src/uml_driver.c:1137 #, fuzzy, c-format msgid "domain with uuid '%s' is already defined" msgstr "이미 %s 도메인이 존재함" #: src/qemu_driver.c:1569 src/qemu_driver.c:1601 src/qemu_driver.c:1633 #: src/qemu_driver.c:1654 src/qemu_driver.c:1894 src/qemu_driver.c:3111 #: src/qemu_driver.c:3236 src/qemu_driver.c:3351 src/qemu_driver.c:3611 #: src/uml_driver.c:1169 src/uml_driver.c:1192 #, c-format msgid "no domain with matching id %d" msgstr "" #: src/qemu_driver.c:1574 src/qemu_driver.c:1606 src/qemu_driver.c:1900 #: src/qemu_driver.c:3116 src/qemu_driver.c:3242 src/qemu_driver.c:3357 #: src/qemu_driver.c:3617 #, fuzzy msgid "domain is not running" msgstr "도메인이 아직 실행 중" #: src/qemu_driver.c:1582 #, fuzzy msgid "suspend operation failed" msgstr "작업 실패" #: src/qemu_driver.c:1639 src/uml_driver.c:1176 #, fuzzy msgid "shutdown operation failed" msgstr "작업 실패" #: src/qemu_driver.c:1682 src/uml_driver.c:1218 #, fuzzy msgid "failed to allocate space for ostype" msgstr "노드 할당 실패" #: src/qemu_driver.c:1698 src/qemu_driver.c:1714 src/qemu_driver.c:1737 #: src/qemu_driver.c:2012 src/qemu_driver.c:2174 src/uml_driver.c:1234 #: src/uml_driver.c:1250 src/uml_driver.c:1273 #, c-format msgid "no domain with matching uuid '%s'" msgstr "" #: src/qemu_driver.c:1720 src/uml_driver.c:1256 msgid "cannot set max memory lower than current memory" msgstr "" #: src/qemu_driver.c:1743 src/uml_driver.c:1279 #, fuzzy msgid "cannot set memory of an active domain" msgstr "비활성화 도메인명" #: src/qemu_driver.c:1749 src/uml_driver.c:1285 msgid "cannot set memory higher than max memory" msgstr "" #: src/qemu_driver.c:1909 #, fuzzy msgid "failed to pause domain" msgstr "도메인 %s를 중지하기 실패" #: src/qemu_driver.c:1918 #, fuzzy msgid "failed to get domain xml" msgstr "도메인 UUID 보기 실패 " #: src/qemu_driver.c:1926 #, fuzzy, c-format msgid "failed to create '%s'" msgstr "XML 생성하기 실패" #: src/qemu_driver.c:1933 #, fuzzy msgid "failed to write save header" msgstr "로그 파일 쓰기 실패" #: src/qemu_driver.c:1941 #, fuzzy msgid "failed to write xml" msgstr "로그 파일 쓰기 실패" #: src/qemu_driver.c:1954 src/qemu_driver.c:1961 src/qemu_driver.c:2234 #: src/qemu_driver.c:2660 src/qemu_driver.c:2736 src/remote_internal.c:2438 #: src/virterror.c:449 msgid "out of memory" msgstr "메모리 부족" #: src/qemu_driver.c:1969 src/qemu_driver.c:3654 #, fuzzy msgid "migrate operation failed" msgstr "작업 실패" #: src/qemu_driver.c:1981 msgid "'migrate' not supported by this qemu" msgstr "" #: src/qemu_driver.c:2018 #, fuzzy msgid "cannot change vcpu count of an active domain" msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: src/qemu_driver.c:2024 msgid "could not determine max vcpus for the domain" msgstr "" #: src/qemu_driver.c:2030 #, c-format msgid "" "requested vcpus is greater than max allowable vcpus for the domain: %d > %d" msgstr "" #: src/qemu_driver.c:2054 src/qemu_driver.c:2106 #, fuzzy msgid "cannot pin vcpus on an inactive domain" msgstr "비활성화 도메인을 정의하지 않음" #: src/qemu_driver.c:2060 #, c-format msgid "vcpu number out of range %d > %d" msgstr "" #: src/qemu_driver.c:2081 #, c-format msgid "cannot set affinity: %s" msgstr "" #: src/qemu_driver.c:2086 msgid "cpu affinity is not supported" msgstr "" #: src/qemu_driver.c:2143 #, c-format msgid "cannot get affinity: %s" msgstr "" #: src/qemu_driver.c:2153 msgid "cpu affinity is not available" msgstr "" #: src/qemu_driver.c:2180 #, c-format msgid "unknown virt type in domain definition '%d'" msgstr "" #: src/qemu_driver.c:2206 src/test.c:1049 #, fuzzy msgid "cannot read domain image" msgstr "노드 도메인 목록" #: src/qemu_driver.c:2212 #, fuzzy msgid "failed to read qemu header" msgstr "Xen 데몬에서 읽기 실패" #: src/qemu_driver.c:2219 msgid "image magic is incorrect" msgstr "" #: src/qemu_driver.c:2226 #, c-format msgid "image version is not supported (%d > %d)" msgstr "" #: src/qemu_driver.c:2241 #, fuzzy msgid "failed to read XML" msgstr "XML 생성하기 실패" #: src/qemu_driver.c:2250 src/qemu_driver.c:3530 #, fuzzy msgid "failed to parse XML" msgstr "XML 생성하기 실패" #: src/qemu_driver.c:2263 #, fuzzy, c-format msgid "domain is already active as '%s'" msgstr "이미 도메인이 활성화됨" #: src/qemu_driver.c:2272 src/qemu_driver.c:3566 #, fuzzy msgid "failed to assign new VM" msgstr "네트워크 UUID 보기 실패" #: src/qemu_driver.c:2285 #, fuzzy msgid "failed to start VM" msgstr "도메인 %s 시작하기 실패" #: src/qemu_driver.c:2301 #, fuzzy msgid "failed to resume domain" msgstr "도메인 %s를 다시 시작하기 실패" #: src/qemu_driver.c:2471 #, c-format msgid "cannot convert disk '%s' to bus/device index" msgstr "" #: src/qemu_driver.c:2497 #, c-format msgid "Unsupported disk name mapping for bus '%s'" msgstr "" #: src/qemu_driver.c:2539 #, c-format msgid "No device with bus '%s' and target '%s'" msgstr "" #: src/qemu_driver.c:2566 #, c-format msgid "" "Emulator version does not support removable media for device '%s' and target " "'%s'" msgstr "" #: src/qemu_driver.c:2603 msgid "cannot change cdrom media" msgstr "" #: src/qemu_driver.c:2614 msgid "changing cdrom media failed" msgstr "" #: src/qemu_driver.c:2647 src/qemu_driver.c:2723 #, c-format msgid "target %s already exists" msgstr "" #: src/qemu_driver.c:2674 #, c-format msgid "cannot attach %s disk" msgstr "" #: src/qemu_driver.c:2688 msgid "Unable to parse slot number\n" msgstr "" #: src/qemu_driver.c:2691 #, fuzzy, c-format msgid "adding %s disk failed" msgstr "이미 %s 도메인이 존재함" #: src/qemu_driver.c:2749 msgid "cannot attach usb disk" msgstr "" #: src/qemu_driver.c:2760 #, fuzzy msgid "adding usb disk failed" msgstr "호스트 정의 파일을 읽어오는중" #: src/qemu_driver.c:2808 #, fuzzy msgid "cannot attach usb device" msgstr "디스크 장치 부착" #: src/qemu_driver.c:2819 #, fuzzy msgid "adding usb device failed" msgstr "호스트 정의 파일을 읽어오는중" #: src/qemu_driver.c:2847 src/qemu_driver.c:2986 #, fuzzy msgid "cannot attach device on inactive domain" msgstr "비활성화 도메인을 정의하지 않음" #: src/qemu_driver.c:2885 msgid "this device type cannot be attached" msgstr "" #: src/qemu_driver.c:2916 #, fuzzy, c-format msgid "disk %s not found" msgstr "도메인을 찾을 수 없음" #: src/qemu_driver.c:2922 #, c-format msgid "disk %s cannot be detached - invalid slot number %d" msgstr "" #: src/qemu_driver.c:2935 #, fuzzy, c-format msgid "failed to execute detach disk %s command" msgstr "노드 정보 보기 실패" #: src/qemu_driver.c:2945 #, fuzzy, c-format msgid "failed to detach disk %s: invalid slot %d" msgstr "%s에서 장치 분리 실패" #: src/qemu_driver.c:3002 msgid "only SCSI or virtio disk device can be detached dynamically" msgstr "" #: src/qemu_driver.c:3041 src/uml_driver.c:1481 #, fuzzy msgid "cannot set autostart for transient domain" msgstr "자동으로 도메인 시작" #: src/qemu_driver.c:3067 src/uml_driver.c:1507 #, fuzzy, c-format msgid "Failed to create symlink '%s to '%s': %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/qemu_driver.c:3129 #, fuzzy, c-format msgid "invalid path: %s" msgstr "%s에 있는 잘못된 인수" #: src/qemu_driver.c:3140 msgid "'info blockstats' command failed" msgstr "" #: src/qemu_driver.c:3153 msgid "'info blockstats' not supported by this qemu" msgstr "" #: src/qemu_driver.c:3217 #, fuzzy, c-format msgid "device not found: %s (%s)" msgstr "도메인을 찾을 수 없음: %s" #: src/qemu_driver.c:3248 src/qemu_driver.c:3291 src/uml_driver.c:1550 msgid "NULL or empty path" msgstr "" #: src/qemu_driver.c:3260 #, c-format msgid "invalid path, '%s' is not a known interface" msgstr "" #: src/qemu_driver.c:3302 src/uml_driver.c:1561 #, fuzzy msgid "invalid path" msgstr "잘못된 인수" #: src/qemu_driver.c:3345 msgid "QEMU driver only supports virtual memory addrs" msgstr "" #: src/qemu_driver.c:3372 msgid "'memsave' command failed" msgstr "" #: src/qemu_driver.c:3474 #, fuzzy msgid "no domain XML passed" msgstr "노드 도메인 목록" #: src/qemu_driver.c:3512 msgid "only tcp URIs are supported for KVM migrations" msgstr "" #: src/qemu_driver.c:3522 msgid "URI did not have ':port' at the end" msgstr "" #: src/qemu_driver.c:3547 #, fuzzy msgid "could not generate random UUID" msgstr "도메인 UUID 보기 실패 " #: src/qemu_driver.c:3555 #, c-format msgid "domain with the same name or UUID already exists as '%s'" msgstr "" #: src/qemu_driver.c:3580 #, fuzzy msgid "failed to start listening VM" msgstr "도메인 %s 시작하기 실패" #: src/qemu_driver.c:3663 #, fuzzy, c-format msgid "migrate failed: %s" msgstr "작업 실패: %s" #: src/qemu_driver.c:3698 #, c-format msgid "no domain with matching name %s" msgstr "" #: src/remote_internal.c:126 src/remote_internal.c:134 #: src/remote_internal.c:150 msgid "tried to use a closed or uninitialised handle" msgstr "" #: src/remote_internal.c:258 #, fuzzy msgid "failed to find libvirtd binary" msgstr "네트워크 찾기 실패" #: src/remote_internal.c:322 msgid "" "remote_open: transport in URL not recognised (should be tls|unix|ssh|ext|tcp)" msgstr "" #: src/remote_internal.c:473 msgid "remote_open: for 'ext' transport, command is required" msgstr "" #: src/remote_internal.c:495 #, fuzzy, c-format msgid "unable to resolve hostname '%s': %s" msgstr "'%s' 열기 실패: %s" #: src/remote_internal.c:546 src/remote_internal.c:626 #, fuzzy, c-format msgid "unable to connect to '%s': %s" msgstr "%s에 연결할 수 없음" #: src/remote_internal.c:567 #, fuzzy, c-format msgid "unable to lookup user '%d': %s" msgstr "'%s' 열기 실패: %s" #: src/remote_internal.c:602 #, fuzzy, c-format msgid "unable to create socket %s" msgstr "소켓 %d에 읽기 실패\n" #: src/remote_internal.c:686 #, fuzzy, c-format msgid "unable to create socket pair %s" msgstr "소켓 %d에 읽기 실패\n" #: src/remote_internal.c:706 msgid "transport methods unix, ssh and ext are not supported under Windows" msgstr "" #: src/remote_internal.c:741 #, fuzzy msgid "unable to auto-detect URI" msgstr "URI 보기 실패" #: src/remote_internal.c:758 #, fuzzy msgid "Error allocating callbacks list" msgstr "메모리 할당 오류: %s" #: src/remote_internal.c:763 #, fuzzy msgid "Error allocating domainEvents" msgstr "도메인 할당 중" #: src/remote_internal.c:854 src/remote_internal.c:2650 #: src/remote_internal.c:3055 msgid "struct private_data" msgstr "" #: src/remote_internal.c:962 #, fuzzy, c-format msgid "unable to allocate TLS credentials: %s" msgstr "노드 할당 실패" #: src/remote_internal.c:982 #, c-format msgid "unable to load CA certificate: %s" msgstr "" #: src/remote_internal.c:997 #, c-format msgid "unable to load private key/certificate: %s" msgstr "" #: src/remote_internal.c:1026 #, c-format msgid "unable to initialize TLS client: %s" msgstr "" #: src/remote_internal.c:1035 #, c-format msgid "unable to set TLS algorithm priority: %s" msgstr "" #: src/remote_internal.c:1044 #, c-format msgid "unable to set certificate priority: %s" msgstr "" #: src/remote_internal.c:1054 #, c-format msgid "unable to set session credentials: %s" msgstr "" #: src/remote_internal.c:1069 #, c-format msgid "unable to complete TLS handshake: %s" msgstr "" #: src/remote_internal.c:1091 #, c-format msgid "unable to complete TLS initialization: %s" msgstr "" #: src/remote_internal.c:1097 msgid "server verification (of our certificate or IP address) failed\n" msgstr "" #: src/remote_internal.c:1122 #, fuzzy, c-format msgid "unable to verify server certificate: %s" msgstr "현재 메모리 크기를 확인할 수 없음" #: src/remote_internal.c:1129 #, c-format msgid "cannot get current time: %s" msgstr "" #: src/remote_internal.c:1135 #, fuzzy msgid "Invalid certificate" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: src/remote_internal.c:1138 msgid "The certificate is not trusted." msgstr "" #: src/remote_internal.c:1141 msgid "The certificate hasn't got a known issuer." msgstr "" #: src/remote_internal.c:1144 msgid "The certificate has been revoked." msgstr "" #: src/remote_internal.c:1148 msgid "The certificate uses an insecure algorithm" msgstr "" #: src/remote_internal.c:1152 #, c-format msgid "server certificate failed validation: %s" msgstr "" #: src/remote_internal.c:1158 msgid "Certificate type is not X.509" msgstr "" #: src/remote_internal.c:1163 msgid "gnutls_certificate_get_peers failed" msgstr "" #: src/remote_internal.c:1173 #, c-format msgid "unable to initialize certificate: %s" msgstr "" #: src/remote_internal.c:1181 #, fuzzy, c-format msgid "unable to import certificate: %s" msgstr "설정 파일 쓰기 실패: %s" #: src/remote_internal.c:1188 msgid "The certificate has expired" msgstr "" #: src/remote_internal.c:1194 msgid "The certificate is not yet activated" msgstr "" #: src/remote_internal.c:1202 #, c-format msgid "Certificate's owner does not match the hostname (%s)" msgstr "" #: src/remote_internal.c:1434 #, c-format msgid "too many NUMA cells: %d > %d" msgstr "" #: src/remote_internal.c:1483 src/remote_internal.c:1497 #, fuzzy, c-format msgid "too many remote domain IDs: %d > %d" msgstr "과도한 도메인" #: src/remote_internal.c:1871 #, c-format msgid "map length greater than maximum: %d > %d" msgstr "" #: src/remote_internal.c:1903 #, c-format msgid "vCPU count exceeds maximum: %d > %d" msgstr "" #: src/remote_internal.c:1909 #, c-format msgid "vCPU map buffer length exceeds maximum: %d > %d" msgstr "" #: src/remote_internal.c:1926 #, c-format msgid "host reports too many vCPUs: %d > %d" msgstr "" #: src/remote_internal.c:1933 #, c-format msgid "host reports map buffer length exceeds maximum: %d > %d" msgstr "" #: src/remote_internal.c:2162 src/remote_internal.c:2176 #, fuzzy, c-format msgid "too many remote domain names: %d > %d" msgstr "과도한 도메인" #: src/remote_internal.c:2378 msgid "" "remoteDomainGetSchedulerParameters: returned number of parameters exceeds " "limit" msgstr "" #: src/remote_internal.c:2406 msgid "remoteDomainGetSchedulerParameters: unknown parameter type" msgstr "" #: src/remote_internal.c:2429 #, fuzzy msgid "out of memory allocating array" msgstr "메모리 할당 변경" #: src/remote_internal.c:2456 #, fuzzy msgid "unknown parameter type" msgstr "알려지지 않은 OS 유형" #: src/remote_internal.c:2546 #, c-format msgid "block peek request too large for remote protocol, %zi > %d" msgstr "" #: src/remote_internal.c:2567 src/remote_internal.c:2611 msgid "returned buffer is not same size as requested" msgstr "" #: src/remote_internal.c:2591 #, c-format msgid "memory peek request too large for remote protocol, %zi > %d" msgstr "" #: src/remote_internal.c:2713 src/remote_internal.c:2727 #: src/remote_internal.c:2772 src/remote_internal.c:2786 #, fuzzy, c-format msgid "too many remote networks: %d > %d" msgstr "과도한 네트워크" #: src/remote_internal.c:3117 src/remote_internal.c:3172 #, fuzzy msgid "too many storage pools requested" msgstr "과도한 드라이버가 등록됨" #: src/remote_internal.c:3129 src/remote_internal.c:3184 #, fuzzy msgid "too many storage pools received" msgstr "과도한 드라이버가 등록됨" #: src/remote_internal.c:3570 #, fuzzy msgid "too many storage volumes requested" msgstr "과도한 드라이버가 등록됨" #: src/remote_internal.c:3583 #, fuzzy msgid "too many storage volumes received" msgstr "과도한 드라이버가 등록됨" #: src/remote_internal.c:3849 #, fuzzy msgid "too many device names requested" msgstr "과도한 드라이버가 등록됨" #: src/remote_internal.c:3863 #, fuzzy msgid "too many device names received" msgstr "과도한 드라이버가 등록됨" #: src/remote_internal.c:3970 #, fuzzy msgid "too many capability names requested" msgstr "과도한 드라이버가 등록됨" #: src/remote_internal.c:3983 msgid "too many capability names received" msgstr "" #: src/remote_internal.c:4042 #, fuzzy, c-format msgid "unknown authentication type %s" msgstr "작업 실패: %s" #: src/remote_internal.c:4052 #, c-format msgid "requested authentication type %s rejected" msgstr "" #: src/remote_internal.c:4093 #, fuzzy, c-format msgid "unsupported authentication type %d" msgstr "작업 실패" #: src/remote_internal.c:4341 #, fuzzy, c-format msgid "failed to initialize SASL library: %d (%s)" msgstr "S-Expr 나열하기 실패: %s" #: src/remote_internal.c:4389 #, fuzzy, c-format msgid "Failed to create SASL client context: %d (%s)" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/remote_internal.c:4402 msgid "invalid cipher size for TLS session" msgstr "" #: src/remote_internal.c:4412 #, c-format msgid "cannot set external SSF %d (%s)" msgstr "" #: src/remote_internal.c:4431 #, c-format msgid "cannot set security props %d (%s)" msgstr "" #: src/remote_internal.c:4450 #, fuzzy, c-format msgid "SASL mechanism %s not supported by server" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/remote_internal.c:4469 #, fuzzy, c-format msgid "Failed to start SASL negotiation: %d (%s)" msgstr "도메인 %s 시작하기 실패" #: src/remote_internal.c:4487 src/remote_internal.c:4565 #, fuzzy msgid "Failed to make auth credentials" msgstr "내용 저장 실패" #: src/remote_internal.c:4511 #, c-format msgid "SASL negotiation data too long: %d bytes" msgstr "" #: src/remote_internal.c:4551 #, fuzzy, c-format msgid "Failed SASL step: %d (%s)" msgstr "도메인 %s 시작하기 실패" #: src/remote_internal.c:4637 #, c-format msgid "negotiation SSF %d was not strong enough" msgstr "" #: src/remote_internal.c:4691 #, fuzzy msgid "Failed to collect auth credentials" msgstr "하이퍼바이저에 연결하기 실패" #: src/remote_internal.c:4722 msgid "no event support" msgstr "" #: src/remote_internal.c:4727 msgid "adding cb to list" msgstr "" #: src/remote_internal.c:4749 msgid "removing cb fron list" msgstr "" #: src/remote_internal.c:4809 msgid "xdr_remote_message_header failed" msgstr "" #: src/remote_internal.c:4815 msgid "marshalling args" msgstr "" #: src/remote_internal.c:4832 msgid "xdr_int (length word)" msgstr "" #: src/remote_internal.c:4850 src/remote_internal.c:5566 msgid "xdr_int (length word, reply)" msgstr "" #: src/remote_internal.c:4860 src/remote_internal.c:5575 msgid "packet received from server too large" msgstr "" #: src/remote_internal.c:4872 #, fuzzy msgid "invalid header in reply" msgstr "%s에 있는 잘못된 인수" #: src/remote_internal.c:4881 #, c-format msgid "unknown program (received %x, expected %x)" msgstr "" #: src/remote_internal.c:4889 #, c-format msgid "unknown protocol version (received %x, expected %x)" msgstr "" #: src/remote_internal.c:4912 #, c-format msgid "unknown procedure (received %x, expected %x)" msgstr "" #: src/remote_internal.c:4920 #, c-format msgid "unknown direction (received %x, expected %x)" msgstr "" #: src/remote_internal.c:4927 #, c-format msgid "unknown serial (received %x, expected %x)" msgstr "" #: src/remote_internal.c:4940 msgid "unmarshalling ret" msgstr "" #: src/remote_internal.c:4950 msgid "unmarshalling remote_error" msgstr "" #: src/remote_internal.c:4970 #, c-format msgid "unknown status (received %x)" msgstr "" #: src/remote_internal.c:5078 src/remote_internal.c:5094 msgid "socket closed unexpectedly" msgstr "" #: src/remote_internal.c:5481 msgid "remoteDomainProcessEvent: unmarshalling ret" msgstr "" #: src/remote_internal.c:5581 msgid "error reading buffer from memory" msgstr "" #: src/remote_internal.c:5588 #, fuzzy msgid "invalid header in event firing" msgstr "잘못된 인수" #: src/remote_internal.c:5598 #, fuzzy msgid "invalid proc in event firing" msgstr "잘못된 도메인 포인터" #: src/sexpr.c:43 msgid "failed to allocate a node" msgstr "노드 할당 실패" #: src/sexpr.c:347 src/sexpr.c:364 msgid "failed to copy a string" msgstr "문자열 복사 실패" #: src/storage_backend.c:94 src/storage_conf.c:202 #, c-format msgid "missing backend for pool type %d" msgstr "" #: src/storage_backend.c:108 src/storage_backend_fs.c:139 #, fuzzy, c-format msgid "cannot open volume '%s': %s" msgstr "'%s' 열기 실패: %s" #: src/storage_backend.c:167 #, c-format msgid "cannot stat file '%s': %s" msgstr "" #: src/storage_backend.c:199 #, c-format msgid "cannot seek to end of file '%s':%s" msgstr "" #: src/storage_backend.c:219 #, c-format msgid "cannot seek to beginning of file '%s':%s" msgstr "" #: src/storage_backend.c:226 #, c-format msgid "cannot read beginning of file '%s':%s" msgstr "" #: src/storage_backend.c:252 #, c-format msgid "cannot get file context of %s: %s" msgstr "" #: src/storage_backend.c:261 msgid "context" msgstr "" #: src/storage_backend.c:314 #, c-format msgid "cannot read dir %s: %s" msgstr "" #: src/storage_backend.c:326 src/storage_driver.c:1233 src/test.c:2187 msgid "path" msgstr "" #: src/storage_backend.c:353 msgid "dup path" msgstr "" #: src/storage_backend.c:389 msgid "regex" msgstr "" #: src/storage_backend.c:399 #, fuzzy, c-format msgid "Failed to compile regex %s" msgstr "'%s' 열기 실패: %s" #: src/storage_backend.c:415 src/storage_backend.c:420 #: src/storage_backend.c:457 msgid "regex groups" msgstr "" #: src/storage_backend.c:433 src/storage_backend.c:568 msgid "cannot read fd" msgstr "" #: src/storage_backend.c:505 src/storage_backend.c:623 #, fuzzy, c-format msgid "failed to wait for command: %s" msgstr "도메인 %s 시작하기 실패" #: src/storage_backend.c:514 src/storage_backend.c:636 msgid "command did not exit cleanly" msgstr "" #: src/storage_backend.c:554 msgid "n_columns too large" msgstr "" #: src/storage_backend.c:602 #, fuzzy, c-format msgid "read error: %s" msgstr "내부 오류 %s" #: src/storage_backend.c:630 #, c-format msgid "non-zero exit status from command %d" msgstr "" #: src/storage_backend.c:657 src/storage_backend.c:669 #, c-format msgid "%s not implemented on Win32" msgstr "" #: src/storage_backend_disk.c:47 src/storage_backend_disk.c:53 #: src/storage_backend_disk.c:64 src/storage_backend_disk.c:71 #: src/storage_backend_disk.c:92 src/storage_backend_iscsi.c:177 #: src/storage_backend_logical.c:85 src/storage_backend_logical.c:92 #: src/storage_backend_logical.c:109 src/storage_backend_logical.c:119 #: src/storage_backend_logical.c:581 msgid "volume" msgstr "" #: src/storage_backend_disk.c:100 msgid "volume extents" msgstr "" #: src/storage_backend_disk.c:108 msgid "cannot parse device start location" msgstr "" #: src/storage_backend_disk.c:115 msgid "cannot parse device end location" msgstr "" #: src/storage_backend_disk.c:121 src/storage_backend_logical.c:130 #: src/storage_backend_logical.c:136 msgid "extents" msgstr "" #: src/storage_backend_disk.c:329 msgid "no large enough free extent" msgstr "" #: src/storage_backend_disk.c:369 #, c-format msgid "Couldn't read volume target path '%s'. %s" msgstr "" #: src/storage_backend_disk.c:384 #, c-format msgid "Volume path '%s' did not start with parent pool source device name." msgstr "" #: src/storage_backend_disk.c:393 #, c-format msgid "cannot parse partition number from target '%s'" msgstr "" #: src/storage_backend_fs.c:151 #, c-format msgid "cannot read header '%s': %s" msgstr "" #: src/storage_backend_fs.c:265 #, fuzzy, c-format msgid "invalid netfs path (no /): %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/storage_backend_fs.c:271 #, fuzzy, c-format msgid "invalid netfs path (ends in /): %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/storage_backend_fs.c:328 msgid "bad spec" msgstr "" #: src/storage_backend_fs.c:334 msgid "xpath_ctxt" msgstr "" #: src/storage_backend_fs.c:341 msgid "missing in spec" msgstr "" #: src/storage_backend_fs.c:353 msgid "retval" msgstr "" #: src/storage_backend_fs.c:387 #, c-format msgid "cannot read %s: %s" msgstr "" #: src/storage_backend_fs.c:457 src/storage_backend_fs.c:524 #: src/storage_backend_iscsi.c:577 #, fuzzy msgid "missing source host" msgstr "장치의 소스 정보 부재" #: src/storage_backend_fs.c:462 #, fuzzy msgid "missing source path" msgstr "장치의 소스 정보 부재" #: src/storage_backend_fs.c:468 src/storage_backend_fs.c:535 #: src/storage_backend_iscsi.c:584 #, fuzzy msgid "missing source device" msgstr "장치의 소스 정보 부재" #: src/storage_backend_fs.c:484 src/storage_backend_fs.c:492 msgid "source" msgstr "" #: src/storage_backend_fs.c:529 #, fuzzy msgid "missing source dir" msgstr "장치의 소스 정보 부재" #: src/storage_backend_fs.c:601 src/storage_backend_fs.c:781 #: src/storage_backend_fs.c:820 #, c-format msgid "cannot create path '%s': %s" msgstr "" #: src/storage_backend_fs.c:625 #, fuzzy, c-format msgid "cannot open path '%s': %s" msgstr "'%s' 열기 실패: %s" #: src/storage_backend_fs.c:674 #, c-format msgid "cannot statvfs path '%s': %s" msgstr "" #: src/storage_backend_fs.c:740 #, c-format msgid "cannot unlink path '%s': %s" msgstr "" #: src/storage_backend_fs.c:763 src/test.c:2080 msgid "target" msgstr "" #: src/storage_backend_fs.c:773 src/test.c:2091 msgid "storage vol key" msgstr "" #: src/storage_backend_fs.c:798 #, c-format msgid "cannot fill file '%s': %s" msgstr "" #: src/storage_backend_fs.c:811 #, c-format msgid "cannot extend file '%s': %s" msgstr "" #: src/storage_backend_fs.c:827 src/storage_backend_fs.c:862 #: src/storage_backend_fs.c:897 src/storage_backend_logical.c:593 #, c-format msgid "cannot read path '%s': %s" msgstr "" #: src/storage_backend_fs.c:839 #, fuzzy, c-format msgid "unknown storage vol type %d" msgstr "알려지지 않은 OS 유형 %s" #: src/storage_backend_fs.c:877 #, c-format msgid "unsupported storage vol type %d" msgstr "" #: src/storage_backend_fs.c:904 msgid "creation of non-raw images is not supported without qemu-img" msgstr "" #: src/storage_backend_fs.c:914 src/storage_backend_logical.c:602 #, fuzzy, c-format msgid "cannot set file owner '%s': %s" msgstr "'%s' 열기 실패: %s" #: src/storage_backend_fs.c:923 src/storage_backend_logical.c:609 #, fuzzy, c-format msgid "cannot set file mode '%s': %s" msgstr "'%s' 열기 실패: %s" #: src/storage_backend_fs.c:939 src/storage_backend_logical.c:616 #, c-format msgid "cannot close file '%s': %s" msgstr "" #: src/storage_backend_fs.c:962 #, c-format msgid "cannot unlink file '%s': %s" msgstr "" #: src/storage_backend_iscsi.c:61 #, fuzzy, c-format msgid "host lookup failed %s" msgstr "작업 실패: %s" #: src/storage_backend_iscsi.c:68 #, c-format msgid "no IP address for target %s" msgstr "" #: src/storage_backend_iscsi.c:77 #, c-format msgid "cannot format ip addr for %s" msgstr "" #: src/storage_backend_iscsi.c:97 #, fuzzy msgid "session" msgstr "버전 보여주기" #: src/storage_backend_iscsi.c:143 msgid "cannot find session" msgstr "" #: src/storage_backend_iscsi.c:184 src/storage_driver.c:887 src/test.c:1957 #, fuzzy msgid "name" msgstr "이름" #: src/storage_backend_iscsi.c:189 msgid "devpath" msgstr "" #: src/storage_backend_iscsi.c:208 src/util.c:210 #, fuzzy, c-format msgid "cannot open %s: %s" msgstr "'%s' 열기 실패: %s" #: src/storage_backend_iscsi.c:232 msgid "key" msgstr "" #: src/storage_backend_iscsi.c:326 src/storage_backend_iscsi.c:411 #: src/storage_backend_iscsi.c:447 #, fuzzy, c-format msgid "Failed to opendir sysfs path %s: %s" msgstr "'%s' 열기 실패: %s" #: src/storage_backend_iscsi.c:339 #, fuzzy, c-format msgid "Failed to parse target from sysfs path %s/%s" msgstr "%s %s 블럭 상태 보기 실패" #: src/storage_backend_iscsi.c:358 #, fuzzy, c-format msgid "Failed to find any LUNs for session %s: %s" msgstr "%s에서 도메인 정의하기 실패" #: src/storage_backend_iscsi.c:388 #, c-format msgid "Failed to determine if %u:%u:%u:%u is a Direct-Access LUN" msgstr "" #: src/storage_backend_iscsi.c:433 #, fuzzy, c-format msgid "Failed to find device link for lun %d" msgstr "%s에서 장치 분리 실패" #: src/storage_backend_iscsi.c:467 #, fuzzy, c-format msgid "Failed to parse block path %s" msgstr "%s %s 블럭 상태 보기 실패" #: src/storage_backend_iscsi.c:477 #, fuzzy msgid "Failed allocating memory for scsidev" msgstr "메모리 할당 실패" #: src/storage_backend_iscsi.c:558 msgid "portal" msgstr "" #: src/storage_backend_logical.c:142 msgid "malformed volume extent offset value" msgstr "" #: src/storage_backend_logical.c:147 msgid "malformed volume extent length value" msgstr "" #: src/storage_backend_logical.c:152 msgid "malformed volume extent size value" msgstr "" #: src/storage_backend_logical.c:210 msgid "lvs command failed" msgstr "" #: src/storage_backend_logical.c:216 #, c-format msgid "lvs command failed with exitstatus %d" msgstr "" #: src/storage_backend_logical.c:258 #, fuzzy msgid "allocating pvname or vgname" msgstr "네트워크 할당 중" #: src/storage_backend_logical.c:273 #, fuzzy msgid "allocating new source" msgstr "네트워크 할당 중" #: src/storage_backend_logical.c:288 #, fuzzy msgid "allocating new device" msgstr "네트워크 할당 중" #: src/storage_backend_logical.c:349 #, fuzzy msgid "failed to get source from sourceList" msgstr "노드 정보 보기 실패" #: src/storage_backend_logical.c:387 #, fuzzy msgid "command line" msgstr "도메인명" #: src/storage_backend_logical.c:404 #, c-format msgid "cannot open device %s" msgstr "" #: src/storage_backend_logical.c:410 #, c-format msgid "cannot clear device header %s" msgstr "" #: src/storage_backend_logical.c:417 #, c-format msgid "cannot close device %s" msgstr "" #: src/storage_backend_logical.c:540 #, c-format msgid "cannot remove PV device %s: %s" msgstr "" #: src/storage_backend_logical.c:625 #, c-format msgid "cannot find newly created volume '%s': %s" msgstr "" #: src/storage_conf.c:334 msgid "missing auth host attribute" msgstr "" #: src/storage_conf.c:341 msgid "missing auth passwd attribute" msgstr "" #: src/storage_conf.c:364 src/storage_conf.c:796 msgid "malformed octal mode" msgstr "" #: src/storage_conf.c:374 msgid "malformed owner element" msgstr "" #: src/storage_conf.c:385 msgid "malformed group element" msgstr "" #: src/storage_conf.c:410 msgid "cannot allocate storage pool" msgstr "" #: src/storage_conf.c:416 msgid "unknown root element for storage pool" msgstr "" #: src/storage_conf.c:423 #, fuzzy, c-format msgid "unknown storage pool type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/storage_conf.c:440 msgid "missing pool source name element" msgstr "" #: src/storage_conf.c:448 #, fuzzy msgid "unable to generate uuid" msgstr "네트워크 이름 또는 uuid" #: src/storage_conf.c:469 #, fuzzy, c-format msgid "unknown pool format type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/storage_conf.c:479 msgid "missing storage pool source host name" msgstr "" #: src/storage_conf.c:489 msgid "cannot extract storage pool source devices" msgstr "" #: src/storage_conf.c:494 #, fuzzy msgid "device" msgstr "블럭 장치" #: src/storage_conf.c:502 #, fuzzy msgid "missing storage pool source device path" msgstr "%s 장치의 소스 정보 부재" #: src/storage_conf.c:513 msgid "missing storage pool source path" msgstr "" #: src/storage_conf.c:525 src/virsh.c:3777 src/virsh.c:3937 src/virsh.c:3976 #, fuzzy msgid "pool name" msgstr "도메인명" #: src/storage_conf.c:540 #, fuzzy, c-format msgid "unknown auth type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/storage_conf.c:555 msgid "missing storage pool target path" msgstr "" #: src/storage_conf.c:624 src/storage_conf.c:1020 msgid "xmlXPathContext" msgstr "" #: src/storage_conf.c:695 #, c-format msgid "unknown pool format number %d" msgstr "" #: src/storage_conf.c:728 src/storage_conf.c:1477 #, fuzzy msgid "unexpected pool type" msgstr "예상외의 mime 유형" #: src/storage_conf.c:774 src/storage_conf.c:1133 msgid "xml" msgstr "" #: src/storage_conf.c:806 src/storage_conf.c:816 msgid "missing owner element" msgstr "" #: src/storage_conf.c:880 #, fuzzy, c-format msgid "unknown size units '%s'" msgstr "알려지지 않은 호스트 %s" #: src/storage_conf.c:887 msgid "malformed capacity element" msgstr "" #: src/storage_conf.c:892 msgid "capacity element value too large" msgstr "" #: src/storage_conf.c:918 msgid "cannot allocate storage vol" msgstr "" #: src/storage_conf.c:924 #, fuzzy msgid "unknown root element" msgstr "알려지지 않은 호스트 %s" #: src/storage_conf.c:931 #, fuzzy msgid "missing volume name element" msgstr "도메인 이름 정보 부재" #: src/storage_conf.c:942 msgid "missing capacity element" msgstr "" #: src/storage_conf.c:966 #, fuzzy, c-format msgid "unknown volume format type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/storage_conf.c:1103 #, c-format msgid "unknown volume format number %d" msgstr "" #: src/storage_conf.c:1232 msgid "pool" msgstr "" #: src/storage_conf.c:1377 msgid "cannot construct config file path" msgstr "" #: src/storage_conf.c:1382 msgid "configFile" msgstr "" #: src/storage_conf.c:1389 msgid "cannot construct autostart link path" msgstr "" #: src/storage_conf.c:1396 msgid "config file" msgstr "" #: src/storage_conf.c:1404 #, fuzzy msgid "failed to generate XML" msgstr "XML 생성하기 실패" #: src/storage_conf.c:1454 #, c-format msgid "cannot remove config for %s" msgstr "" #: src/storage_driver.c:264 src/storage_driver.c:771 src/storage_driver.c:793 msgid "no pool with matching uuid" msgstr "" #: src/storage_driver.c:282 msgid "no pool with matching name" msgstr "" #: src/storage_driver.c:337 src/storage_driver.c:379 #, fuzzy msgid "names" msgstr "이름" #: src/storage_driver.c:437 src/test.c:1777 msgid "storage pool already exists" msgstr "" #: src/storage_driver.c:508 src/storage_driver.c:543 src/storage_driver.c:580 #: src/storage_driver.c:611 src/storage_driver.c:650 src/storage_driver.c:687 #: src/storage_driver.c:726 src/storage_driver.c:755 src/storage_driver.c:849 #: src/storage_driver.c:873 src/storage_driver.c:913 src/storage_driver.c:1012 #: src/storage_driver.c:1072 src/storage_driver.c:1135 #: src/storage_driver.c:1179 src/storage_driver.c:1213 msgid "no storage pool with matching uuid" msgstr "" #: src/storage_driver.c:514 msgid "pool is still active" msgstr "" #: src/storage_driver.c:553 #, fuzzy msgid "pool already active" msgstr "이미 도메인이 활성화됨" #: src/storage_driver.c:590 #, fuzzy msgid "storage pool is already active" msgstr "이미 도메인이 활성화됨" #: src/storage_driver.c:621 src/storage_driver.c:697 src/storage_driver.c:855 #: src/storage_driver.c:879 src/storage_driver.c:919 src/storage_driver.c:1018 #: src/storage_driver.c:1078 src/storage_driver.c:1141 #: src/storage_driver.c:1185 src/storage_driver.c:1219 #, fuzzy msgid "storage pool is not active" msgstr "로그 경로가 파일이 아님" #: src/storage_driver.c:660 msgid "storage pool is still active" msgstr "" #: src/storage_driver.c:666 msgid "pool does not support volume delete" msgstr "" #: src/storage_driver.c:799 src/test.c:1924 msgid "pool has no config file" msgstr "" #: src/storage_driver.c:927 src/storage_driver.c:1089 #: src/storage_driver.c:1149 src/storage_driver.c:1193 #: src/storage_driver.c:1227 msgid "no storage vol with matching name" msgstr "" #: src/storage_driver.c:956 msgid "no storage vol with matching key" msgstr "" #: src/storage_driver.c:996 msgid "no storage vol with matching path" msgstr "" #: src/storage_driver.c:1031 src/test.c:2053 msgid "storage vol already exists" msgstr "" #: src/storage_driver.c:1045 msgid "storage pool does not support volume creation" msgstr "" #: src/storage_driver.c:1095 msgid "storage pool does not support vol deletion" msgstr "" #: src/test.c:140 src/test.c:1982 #, c-format msgid "no storage vol with matching name '%s'" msgstr "" #: src/test.c:155 #, c-format msgid "storage pool '%s' is not active" msgstr "" #: src/test.c:162 #, fuzzy, c-format msgid "storage pool '%s' is already active" msgstr "이미 도메인이 활성화됨" #: src/test.c:281 src/test.c:961 msgid "getting time of day" msgstr "시간 읽어오는 중" #: src/test.c:392 #, fuzzy, c-format msgid "loading host definition file '%s': %s" msgstr "호스트 정의 파일을 읽어오는중" #: src/test.c:400 msgid "host" msgstr "호스트" #: src/test.c:408 msgid "node" msgstr "노드" #: src/test.c:415 msgid "creating xpath context" msgstr "xpath 문맥 생성하는 중" #: src/test.c:430 msgid "node cpu numa nodes" msgstr "노드 cpu numa 노드" #: src/test.c:438 msgid "node cpu sockets" msgstr "노드 cpu 소켓" #: src/test.c:446 msgid "node cpu cores" msgstr "노드 cpu 코어" #: src/test.c:454 msgid "node cpu threads" msgstr "노드 cpu 스레드" #: src/test.c:465 msgid "node active cpu" msgstr "노드 활성화 cpu" #: src/test.c:472 msgid "node cpu mhz" msgstr "노드 cpu mhz" #: src/test.c:487 msgid "node memory" msgstr "노드 메모리" #: src/test.c:493 msgid "node domain list" msgstr "노드 도메인 목록" #: src/test.c:504 msgid "resolving domain filename" msgstr "도메인 파일명 해결 중" #: src/test.c:530 #, fuzzy msgid "node network list" msgstr "노드 도메인 목록" #: src/test.c:540 msgid "resolving network filename" msgstr "네트워크 파일명 해결 중" #: src/test.c:566 #, fuzzy msgid "node pool list" msgstr "노드 도메인 목록" #: src/test.c:578 #, fuzzy msgid "resolving pool filename" msgstr "도메인 파일명 해결 중" #: src/test.c:661 msgid "testOpen: supply a path or use test:///default" msgstr "testOpen: 경로를 지정하거나 test:///default 사용" #: src/test.c:873 #, fuzzy, c-format msgid "domain '%s' not paused" msgstr "이미 %s 도메인이 존재함" #: src/test.c:889 src/test.c:904 #, fuzzy, c-format msgid "domain '%s' not running" msgstr "도메인이 아직 실행 중" #: src/test.c:987 #, c-format msgid "saving domain '%s' failed to allocate space for metadata: %s" msgstr "" #: src/test.c:994 #, c-format msgid "saving domain '%s' to '%s': open failed: %s" msgstr "" #: src/test.c:1001 src/test.c:1008 src/test.c:1015 src/test.c:1024 #, c-format msgid "saving domain '%s' to '%s': write failed: %s" msgstr "" #: src/test.c:1054 msgid "incomplete save header" msgstr "" #: src/test.c:1060 msgid "mismatched header magic" msgstr "" #: src/test.c:1066 #, fuzzy msgid "failed to read metadata length" msgstr "Xen 데몬에서 읽기 실패" #: src/test.c:1072 msgid "length of metadata out of range" msgstr "" #: src/test.c:1083 msgid "incomplete metdata" msgstr "" #: src/test.c:1114 #, fuzzy, c-format msgid "domain '%s' coredump: failed to open %s: %s" msgstr "도메인 %s를 %s에 덤프함\n" #: src/test.c:1120 #, fuzzy, c-format msgid "domain '%s' coredump: failed to write header to %s: %s" msgstr "로그 파일 쓰기 실패" #: src/test.c:1127 #, c-format msgid "domain '%s' coredump: write failed: %s: %s" msgstr "" #: src/test.c:1271 msgid "Range exceeds available cells" msgstr "" #: src/test.c:1290 #, fuzzy, c-format msgid "Domain '%s' is already running" msgstr "이미 도메인이 실행 중" #: src/test.c:1305 #, fuzzy, c-format msgid "Domain '%s' is still running" msgstr "도메인이 아직 실행 중" #: src/test.c:1532 #, fuzzy, c-format msgid "Network '%s' is still running" msgstr "네트워크가 아직 실행 중" #: src/test.c:1547 #, fuzzy, c-format msgid "Network '%s' is already running" msgstr "이미 네트워크가 실행 중" #: src/test.c:2011 #, c-format msgid "no storage vol with matching key '%s'" msgstr "" #: src/test.c:2035 #, c-format msgid "no storage vol with matching path '%s'" msgstr "" #: src/test.c:2062 #, c-format msgid "Not enough free space in pool for volume '%s'" msgstr "" #: src/uml_conf.c:196 msgid "only TCP listen is supported for chr device" msgstr "" #: src/uml_conf.c:216 #, c-format msgid "unsupported chr device type %d" msgstr "" #: src/uml_driver.c:339 msgid "cannot initialize inotify" msgstr "" #: src/uml_driver.c:344 #, fuzzy, c-format msgid "Failed to create monitor directory %s: %s" msgstr "%s에서 네트워크 생성하기 실패" #: src/uml_driver.c:379 #, fuzzy msgid "umlStartup: out of memory\n" msgstr "메모리 부족" #: src/uml_driver.c:513 #, fuzzy, c-format msgid "failed to read pid: %s: %s" msgstr "'%s' 열기 실패: %s" #: src/uml_driver.c:561 #, fuzzy, c-format msgid "cannot open socket %s" msgstr "노드 cpu 소켓" #: src/uml_driver.c:569 #, c-format msgid "cannot bind socket %s" msgstr "" #: src/uml_driver.c:622 #, c-format msgid "cannot send too long command %s: %s" msgstr "" #: src/uml_driver.c:632 #, fuzzy, c-format msgid "cannot send command %s: %s" msgstr "알려지지 않은 명령: '%s'" #: src/uml_driver.c:642 #, c-format msgid "cannot read reply %s: %s" msgstr "" #: src/uml_driver.c:694 msgid "no kernel specified" msgstr "" #: src/uml_driver.c:703 #, c-format msgid "Cannot find UML kernel %s: %s" msgstr "" #: src/uml_driver.c:710 #, c-format msgid "cannot create log directory %s" msgstr "" #: src/uml_driver.c:784 #, fuzzy, c-format msgid "failed to wait on process: %d: %s\n" msgstr "소켓 %d에 쓰기 실패\n" #: src/uml_driver.c:826 #, c-format msgid "Got unexpected pid %d != %d\n" msgstr "" #: src/uml_driver.c:1063 #, fuzzy, c-format msgid "cannot parse version %s" msgstr "%s에 연결할 수 없음" #: src/util.c:203 #, c-format msgid "cannot block signals: %s" msgstr "" #: src/util.c:219 #, c-format msgid "cannot create pipe: %s" msgstr "" #: src/util.c:279 src/util.c:369 #, c-format msgid "cannot fork child process: %s" msgstr "" #: src/util.c:298 src/util.c:336 #, c-format msgid "cannot unblock signals: %s" msgstr "" #: src/util.c:354 #, c-format msgid "cannot become session leader: %s" msgstr "" #: src/util.c:361 #, c-format msgid "cannot change to root directory: %s" msgstr "" #: src/util.c:381 #, fuzzy, c-format msgid "failed to setup stdin file handle: %s" msgstr "%s 설정 파일 구문 분석 실패" #: src/util.c:387 #, fuzzy, c-format msgid "failed to setup stdout file handle: %s" msgstr "%s 설정 파일 구문 분석 실패" #: src/util.c:393 #, fuzzy, c-format msgid "failed to setup stderr file handle: %s" msgstr "도메인 %s를 정의하지 않기 실패" #: src/util.c:410 #, c-format msgid "cannot execute binary '%s': %s" msgstr "" #: src/util.c:448 src/util.c:565 msgid "command debug string" msgstr "" #: src/util.c:495 msgid "Unknown poll response." msgstr "" #: src/util.c:526 #, fuzzy, c-format msgid "poll error: %s" msgstr "오류:" #: src/util.c:599 #, c-format msgid "'%s' exited with non-zero status %d and signal %d: %s" msgstr "" #: src/uuid.c:104 #, c-format msgid "Falling back to pseudorandom UUID, failed to generate random bytes: %s" msgstr "" #: src/virsh.c:339 msgid "print help" msgstr "도움말 프린트하기" #: src/virsh.c:340 msgid "Prints global help or command specific help." msgstr "전역적 도움말 또는 명령으로된 특정 도움말을 프린트함." #: src/virsh.c:346 msgid "name of command" msgstr "명령 이름" #: src/virsh.c:358 msgid "" "Commands:\n" "\n" msgstr "" "명령:\n" "\n" #: src/virsh.c:372 msgid "autostart a domain" msgstr "자동으로 도메인 시작" #: src/virsh.c:374 msgid "Configure a domain to be automatically started at boot." msgstr "부팅시 자동으로 도메인이 시작되도록 설정함." #: src/virsh.c:379 src/virsh.c:479 src/virsh.c:673 src/virsh.c:710 #: src/virsh.c:767 src/virsh.c:834 src/virsh.c:1069 src/virsh.c:1113 #: src/virsh.c:1334 src/virsh.c:1379 src/virsh.c:1418 src/virsh.c:1457 #: src/virsh.c:1496 src/virsh.c:1535 src/virsh.c:1659 src/virsh.c:1746 #: src/virsh.c:1880 src/virsh.c:1937 src/virsh.c:1994 src/virsh.c:2116 #: src/virsh.c:2257 src/virsh.c:4580 src/virsh.c:4656 src/virsh.c:4717 #: src/virsh.c:4776 src/virsh.c:4835 src/virsh.c:4952 src/virsh.c:5073 #: src/virsh.c:5238 src/virsh.c:5469 msgid "domain name, id or uuid" msgstr "도메인명, id 또는 uuid" #: src/virsh.c:380 src/virsh.c:2326 src/virsh.c:2823 msgid "disable autostarting" msgstr "자동 시작 비활성" #: src/virsh.c:401 #, c-format msgid "Failed to mark domain %s as autostarted" msgstr "자동 시작으로 %s 도메인을 표시하기 실패" #: src/virsh.c:404 #, c-format msgid "Failed to unmark domain %s as autostarted" msgstr "자동 시작으로 %s 도메인을 표시 해제하기 실패" #: src/virsh.c:411 #, c-format msgid "Domain %s marked as autostarted\n" msgstr "%s 도메인은 자동 시작으로 표시됨\n" #: src/virsh.c:413 #, c-format msgid "Domain %s unmarked as autostarted\n" msgstr "%s 도메인이 자동 시작으로 표시되지 않음\n" #: src/virsh.c:424 msgid "(re)connect to hypervisor" msgstr "하이퍼바이저로 (재)연결" #: src/virsh.c:426 msgid "" "Connect to local hypervisor. This is built-in command after shell start up." msgstr "로컬 하이퍼바이저로 연결. 이는 쉘을 시작한 후에 내장된 명령임" #: src/virsh.c:431 msgid "hypervisor connection URI" msgstr "하이퍼바이저 연결 URI" #: src/virsh.c:432 msgid "read-only connection" msgstr "읽기 전용 연결" #: src/virsh.c:444 msgid "Failed to disconnect from the hypervisor" msgstr "하이퍼바이저에서 연결 끊기 실패" #: src/virsh.c:462 msgid "Failed to connect to the hypervisor" msgstr "하이퍼바이저에 연결하기 실패" #: src/virsh.c:472 msgid "connect to the guest console" msgstr "게스트 콘솔로 연결" #: src/virsh.c:474 msgid "Connect the virtual serial console for the guest" msgstr "게스트를 위한 가상 직렬 콘솔 연결" #: src/virsh.c:521 msgid "No console available for domain\n" msgstr "도메인에서 사용 가능한 콘솔이 없음\n" #: src/virsh.c:538 msgid "console not implemented on this platform" msgstr "" #: src/virsh.c:549 msgid "list domains" msgstr "도메인 목록" #: src/virsh.c:550 msgid "Returns list of domains." msgstr "도메인 목록 보기" #: src/virsh.c:555 msgid "list inactive domains" msgstr "비활성화 도메인 보기" #: src/virsh.c:556 msgid "list inactive & active domains" msgstr "비활성화 & 활성화 도메인 보기" #: src/virsh.c:578 src/virsh.c:585 msgid "Failed to list active domains" msgstr "활성화 도메인 보기 실패" #: src/virsh.c:596 src/virsh.c:604 msgid "Failed to list inactive domains" msgstr "비활성화 도메인 보기 실패" #: src/virsh.c:613 msgid "Id" msgstr "Id" #: src/virsh.c:613 src/virsh.c:2609 src/virsh.c:3411 src/virsh.c:4207 msgid "Name" msgstr "이름" #: src/virsh.c:613 src/virsh.c:2609 src/virsh.c:3411 msgid "State" msgstr "상태" #: src/virsh.c:626 src/virsh.c:648 src/virsh.c:6433 src/virsh.c:6449 msgid "no state" msgstr "상태 없음" #: src/virsh.c:667 msgid "domain state" msgstr "도메인 상태" #: src/virsh.c:668 #, fuzzy msgid "Returns state about a domain." msgstr "실행 중인 도메인 상태 보기" #: src/virsh.c:704 msgid "get device block stats for a domain" msgstr "도메인의 장치 블럭 상태 보기" #: src/virsh.c:705 msgid "Get device block stats for a running domain." msgstr "실행 중인 도메인의 장치 블럭 상태 보기" #: src/virsh.c:711 msgid "block device" msgstr "블럭 장치" #: src/virsh.c:732 #, c-format msgid "Failed to get block stats %s %s" msgstr "%s %s 블럭 상태 보기 실패" #: src/virsh.c:761 msgid "get network interface stats for a domain" msgstr "도메인의 네트워크 인터페이스 상태 보기" #: src/virsh.c:762 msgid "Get network interface stats for a running domain." msgstr "실행 중인 도메인의 네트워크 인터페이스 상태 보기" #: src/virsh.c:768 msgid "interface device" msgstr "인터페이스 장치" #: src/virsh.c:789 #, c-format msgid "Failed to get interface stats %s %s" msgstr "%s %s 인터페이스 상태 보기 실패" #: src/virsh.c:828 msgid "suspend a domain" msgstr "도메인을 중지함" #: src/virsh.c:829 msgid "Suspend a running domain." msgstr "실행중인 도메인 중지." #: src/virsh.c:852 #, c-format msgid "Domain %s suspended\n" msgstr "도메인 %s가 중지됨\n" #: src/virsh.c:854 #, c-format msgid "Failed to suspend domain %s" msgstr "도메인 %s를 중지하기 실패" #: src/virsh.c:867 msgid "create a domain from an XML file" msgstr "XML 파일에서 도메인 생성" #: src/virsh.c:868 msgid "Create a domain." msgstr "도메인 생성" #: src/virsh.c:873 src/virsh.c:921 msgid "file containing an XML domain description" msgstr "XML 도메인 설명이 있는 파일" #: src/virsh.c:900 #, c-format msgid "Domain %s created from %s\n" msgstr "%s 에서 생성된 도메인 %s\n" #: src/virsh.c:904 #, c-format msgid "Failed to create domain from %s" msgstr "%s에서 도메인 생성하기 실패" #: src/virsh.c:915 msgid "define (but don't start) a domain from an XML file" msgstr "XML 파일에서 도메인을 정의함 (시작하지는 않음)" #: src/virsh.c:916 msgid "Define a domain." msgstr "도메인 정의" #: src/virsh.c:948 #, c-format msgid "Domain %s defined from %s\n" msgstr "%s에서 정의된 도메인 %s\n" #: src/virsh.c:952 #, c-format msgid "Failed to define domain from %s" msgstr "%s에서 도메인 정의하기 실패" #: src/virsh.c:963 msgid "undefine an inactive domain" msgstr "비활성화 도메인을 정의하지 않음" #: src/virsh.c:964 msgid "Undefine the configuration for an inactive domain." msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: src/virsh.c:969 src/virsh.c:2185 msgid "domain name or uuid" msgstr "도메인명 또는 uuid" #: src/virsh.c:991 #, c-format msgid "" "a running domain like %s cannot be undefined;\n" "to undefine, first shutdown then undefine using its name or UUID" msgstr "" #: src/virsh.c:1002 #, c-format msgid "Domain %s has been undefined\n" msgstr "도메인 %s는 정의되지 않음\n" #: src/virsh.c:1004 #, c-format msgid "Failed to undefine domain %s" msgstr "도메인 %s를 정의하지 않기 실패" #: src/virsh.c:1018 msgid "start a (previously defined) inactive domain" msgstr "(기존에 정의된) 비활성화 도메인 시작" #: src/virsh.c:1019 msgid "Start a domain." msgstr "도메인 시작" #: src/virsh.c:1024 msgid "name of the inactive domain" msgstr "비활성화 도메인명" #: src/virsh.c:1041 msgid "Domain is already active" msgstr "이미 도메인이 활성화됨" #: src/virsh.c:1047 #, c-format msgid "Domain %s started\n" msgstr "도메인 %s가 시작됨\n" #: src/virsh.c:1050 #, c-format msgid "Failed to start domain %s" msgstr "도메인 %s 시작하기 실패" #: src/virsh.c:1063 msgid "save a domain state to a file" msgstr "도메인 상태를 파일에 저장" #: src/virsh.c:1064 msgid "Save a running domain." msgstr "실행중인 도메인 저장" #: src/virsh.c:1070 msgid "where to save the data" msgstr "데이터를 저장할 장소" #: src/virsh.c:1092 #, c-format msgid "Domain %s saved to %s\n" msgstr "도메인 %s는 %s에 저장됨\n" #: src/virsh.c:1094 #, c-format msgid "Failed to save domain %s to %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/virsh.c:1107 msgid "show/set scheduler parameters" msgstr "스케줄러 매개 변수 보기/설정" #: src/virsh.c:1108 msgid "Show/Set scheduler parameters." msgstr "스케줄러 매개 변수 보기/설정" #: src/virsh.c:1114 msgid "parameter=value" msgstr "" #: src/virsh.c:1115 msgid "weight for XEN_CREDIT" msgstr "XEN_CREDIT의 weight" #: src/virsh.c:1116 msgid "cap for XEN_CREDIT" msgstr "XEN_CREDIT의 cap" #: src/virsh.c:1152 #, fuzzy msgid "Invalid value of weight" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: src/virsh.c:1162 #, fuzzy msgid "Invalid value of cap" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: src/virsh.c:1172 msgid "Error getting param" msgstr "" #: src/virsh.c:1181 #, fuzzy msgid "Invalid value of param" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: src/virsh.c:1230 src/virsh.c:1234 msgid "Scheduler" msgstr "스케줄러" #: src/virsh.c:1234 msgid "Unknown" msgstr "알려지지 않음" #: src/virsh.c:1290 msgid "restore a domain from a saved state in a file" msgstr "파일에 저장된 상태에서 도메인을 복구" #: src/virsh.c:1291 msgid "Restore a domain." msgstr "도메인 복구." #: src/virsh.c:1296 msgid "the state to restore" msgstr "복구 상태" #: src/virsh.c:1315 #, c-format msgid "Domain restored from %s\n" msgstr "%s에서 도메인이 복구됨\n" #: src/virsh.c:1317 #, c-format msgid "Failed to restore domain from %s" msgstr "%s에서 도메인을 복구하기 실패" #: src/virsh.c:1328 msgid "dump the core of a domain to a file for analysis" msgstr "도메인을 파일에 코어 덤프하여 분석" #: src/virsh.c:1329 msgid "Core dump a domain." msgstr "도메인을 코어 덤프함." #: src/virsh.c:1335 msgid "where to dump the core" msgstr "코어 덤프할 위치" #: src/virsh.c:1357 #, fuzzy, c-format msgid "Domain %s dumped to %s\n" msgstr "도메인 %s를 %s에 덤프함\n" #: src/virsh.c:1359 #, c-format msgid "Failed to core dump domain %s to %s" msgstr "도메인 %s를 %s에 코어 덤프하기 실패" #: src/virsh.c:1373 msgid "resume a domain" msgstr "도메인을 다시 시작" #: src/virsh.c:1374 msgid "Resume a previously suspended domain." msgstr "이전에 중지된 도메인을 다시 시작함." #: src/virsh.c:1397 #, c-format msgid "Domain %s resumed\n" msgstr "도메인 %s가 다시 시작됨\n" #: src/virsh.c:1399 #, c-format msgid "Failed to resume domain %s" msgstr "도메인 %s를 다시 시작하기 실패" #: src/virsh.c:1412 msgid "gracefully shutdown a domain" msgstr "도메인을 종료" #: src/virsh.c:1413 msgid "Run shutdown in the target domain." msgstr "대상 도메인에서 종료하기 실행" #: src/virsh.c:1436 #, c-format msgid "Domain %s is being shutdown\n" msgstr "도메인 %s가 종료됨\n" #: src/virsh.c:1438 #, c-format msgid "Failed to shutdown domain %s" msgstr "도메인 %s를 종료하기 실패" #: src/virsh.c:1451 msgid "reboot a domain" msgstr "도메인을 재부팅" #: src/virsh.c:1452 msgid "Run a reboot command in the target domain." msgstr "대상 도메인에서 재부팅 명령 실행." #: src/virsh.c:1475 #, c-format msgid "Domain %s is being rebooted\n" msgstr "도메인 %s가 재부팅됨\n" #: src/virsh.c:1477 #, c-format msgid "Failed to reboot domain %s" msgstr "도메인 %s를 재부팅하기 실패" #: src/virsh.c:1490 msgid "destroy a domain" msgstr "도메인 강제 종료 " #: src/virsh.c:1491 msgid "Destroy a given domain." msgstr "주어진 도메인 강제 종료.." #: src/virsh.c:1514 #, c-format msgid "Domain %s destroyed\n" msgstr "%s 도메인 강제 종료\n" #: src/virsh.c:1516 #, c-format msgid "Failed to destroy domain %s" msgstr "%s 도메인 강제 종료 실패 " #: src/virsh.c:1529 msgid "domain information" msgstr "도메인 정보" #: src/virsh.c:1530 msgid "Returns basic information about the domain." msgstr "도메인에 관한 기본 정보 보기" #: src/virsh.c:1556 src/virsh.c:1558 msgid "Id:" msgstr "Id:" #: src/virsh.c:1559 src/virsh.c:3649 src/virsh.c:4095 msgid "Name:" msgstr "이름:" #: src/virsh.c:1562 src/virsh.c:3652 msgid "UUID:" msgstr "UUID:" #: src/virsh.c:1565 msgid "OS Type:" msgstr "OS 유형:" #: src/virsh.c:1570 src/virsh.c:1703 src/virsh.c:3659 src/virsh.c:3663 #: src/virsh.c:3667 src/virsh.c:3671 msgid "State:" msgstr "상태:" #: src/virsh.c:1573 src/virsh.c:2066 msgid "CPU(s):" msgstr "CPU:" #: src/virsh.c:1580 src/virsh.c:1710 msgid "CPU time:" msgstr "CPU 시간:" #: src/virsh.c:1584 src/virsh.c:1587 msgid "Max memory:" msgstr "최대 메모리:" #: src/virsh.c:1588 msgid "no limit" msgstr "무제한" #: src/virsh.c:1590 msgid "Used memory:" msgstr "사용된 메모리:" #: src/virsh.c:1598 #, fuzzy msgid "Autostart:" msgstr "자동 시작" #: src/virsh.c:1599 msgid "enable" msgstr "" #: src/virsh.c:1599 msgid "disable" msgstr "" #: src/virsh.c:1611 #, fuzzy msgid "NUMA free memory" msgstr "사용된 메모리:" #: src/virsh.c:1612 msgid "display available free memory for the NUMA cell." msgstr "" #: src/virsh.c:1617 #, fuzzy msgid "NUMA cell number" msgstr "NUMA cell:" #: src/virsh.c:1641 msgid "Total" msgstr "" #: src/virsh.c:1653 msgid "domain vcpu information" msgstr "도메인 vcpu 정보" #: src/virsh.c:1654 msgid "Returns basic information about the domain virtual CPUs." msgstr "도메인 가상 CPU에 관한 기본 정보 보기" #: src/virsh.c:1701 msgid "VCPU:" msgstr "VCPU:" #: src/virsh.c:1702 msgid "CPU:" msgstr "CPU:" #: src/virsh.c:1712 msgid "CPU Affinity:" msgstr "CPU 동질관계:" #: src/virsh.c:1724 msgid "Domain shut off, virtual CPUs not present." msgstr "도메인 종료, 가상 CPU가 없음." #: src/virsh.c:1740 msgid "control domain vcpu affinity" msgstr "도메인 vcpu 동질 관계 제어" #: src/virsh.c:1741 msgid "Pin domain VCPUs to host physical CPUs." msgstr "도메인 VCPU를 물리적 호스트 CPU에 고정." #: src/virsh.c:1747 msgid "vcpu number" msgstr "vcpu 수" #: src/virsh.c:1748 msgid "host cpu number(s) (comma separated)" msgstr "호스트 cpu 수 (콤마로 분리됨)" #: src/virsh.c:1776 msgid "vcpupin: Invalid or missing vCPU number." msgstr "" #: src/virsh.c:1782 msgid "vcpupin: Missing cpulist" msgstr "" #: src/virsh.c:1794 #, fuzzy msgid "vcpupin: failed to get domain informations." msgstr "노드 정보 보기 실패" #: src/virsh.c:1800 msgid "vcpupin: Invalid vCPU number." msgstr "" #: src/virsh.c:1809 msgid "cpulist: Invalid format. Empty string." msgstr "cpulist: 잘못된 포맷. 비어있음." #: src/virsh.c:1819 #, c-format msgid "" "cpulist: %s: Invalid format. Expecting digit at position %d (near '%c')." msgstr "cpulist: %s: 잘못된 포맷. %d ('%c' 주변)에 숫자로 표기" #: src/virsh.c:1829 #, c-format msgid "" "cpulist: %s: Invalid format. Expecting digit or comma at position %d (near '%" "c')." msgstr "cpulist: %s: 잘못된 포맷. %d ('%c' 주변)에 숫자 또는 콤마로 표기" #: src/virsh.c:1836 #, c-format msgid "cpulist: %s: Invalid format. Trailing comma at position %d." msgstr "cpulist: %s: 잘못된 포맷. %d로 마지막을 콤마로 표기" #: src/virsh.c:1850 #, c-format msgid "Physical CPU %d doesn't exist." msgstr "물리적 CPU %d이(가) 존재하지 않음." #: src/virsh.c:1874 msgid "change number of virtual CPUs" msgstr "가상 CPU 수 변경" #: src/virsh.c:1875 #, fuzzy msgid "Change the number of virtual CPUs in the guest domain." msgstr "게스트 도메인에서 활성화 상태인 가상 CPU 수 변경." #: src/virsh.c:1881 msgid "number of virtual CPUs" msgstr "가상 CPU 수" #: src/virsh.c:1901 msgid "Invalid number of virtual CPUs." msgstr "잘못된 가상 CPU 수." #: src/virsh.c:1913 msgid "Too many virtual CPUs." msgstr "과도한 가상 CPU 수" #: src/virsh.c:1931 msgid "change memory allocation" msgstr "메모리 할당 변경" #: src/virsh.c:1932 msgid "Change the current memory allocation in the guest domain." msgstr "게스트 도메인에 있는 현재 메모리 할당을 변경." #: src/virsh.c:1938 msgid "number of kilobytes of memory" msgstr "메모리의 킬로바이트 수" #: src/virsh.c:1959 src/virsh.c:1971 src/virsh.c:2016 #, c-format msgid "Invalid value of %d for memory size" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: src/virsh.c:1965 msgid "Unable to verify MaxMemorySize" msgstr "최대 메모리 크기를 확인할 수 없음" #: src/virsh.c:1988 msgid "change maximum memory limit" msgstr "최대 메모리 크기 제한 변경" #: src/virsh.c:1989 msgid "Change the maximum memory allocation limit in the guest domain." msgstr "게스트 도메인에서 최대 메모리 할당 제한 변경." #: src/virsh.c:1995 msgid "maximum memory limit in kilobytes" msgstr "킬로바이트에서 최대 메모리 크기 제한" #: src/virsh.c:2022 msgid "Unable to verify current MemorySize" msgstr "현재 메모리 크기를 확인할 수 없음" #: src/virsh.c:2029 msgid "Unable to shrink current MemorySize" msgstr "현재 메모리 크기를 줄일 수 없음" #: src/virsh.c:2035 msgid "Unable to change MaxMemorySize" msgstr "최대 메모리 크기를 변경할 수 없음" #: src/virsh.c:2048 msgid "node information" msgstr "노드 정보" #: src/virsh.c:2049 msgid "Returns basic information about the node." msgstr "노드에 관한 기본 정보 보기" #: src/virsh.c:2062 msgid "failed to get node information" msgstr "노드 정보 보기 실패" #: src/virsh.c:2065 msgid "CPU model:" msgstr "CPU 모델:" #: src/virsh.c:2067 msgid "CPU frequency:" msgstr "CPU 주파수:" #: src/virsh.c:2068 msgid "CPU socket(s):" msgstr "CPU 소켓:" #: src/virsh.c:2069 msgid "Core(s) per socket:" msgstr "소켓당 코어:" #: src/virsh.c:2070 msgid "Thread(s) per core:" msgstr "코어당 스레드:" #: src/virsh.c:2071 msgid "NUMA cell(s):" msgstr "NUMA cell:" #: src/virsh.c:2072 msgid "Memory size:" msgstr "메모리 용량:" #: src/virsh.c:2082 msgid "capabilities" msgstr "기능" #: src/virsh.c:2083 msgid "Returns capabilities of hypervisor/driver." msgstr "하이퍼바이저/드라이버 기능으로 전환" #: src/virsh.c:2096 msgid "failed to get capabilities" msgstr "기능 전환 실패" #: src/virsh.c:2110 msgid "domain information in XML" msgstr "XML에 있는 도메인 정보" #: src/virsh.c:2111 msgid "Output the domain information as an XML dump to stdout." msgstr "XML 덤프로서의 도메인 정보를 표준 출력으로 출력." #: src/virsh.c:2150 msgid "convert a domain id or UUID to domain name" msgstr "도메인 id 또는 UUID를 도메인명으로 변환" #: src/virsh.c:2155 msgid "domain id or uuid" msgstr "도메인 id 또는 uuid" #: src/virsh.c:2180 msgid "convert a domain name or UUID to domain id" msgstr "도메인명 또는 UUID를 도메인 id로 변환" #: src/virsh.c:2215 msgid "convert a domain name or id to domain UUID" msgstr "도메인명이나 id를 도메인 UUID로 변환" #: src/virsh.c:2220 msgid "domain id or name" msgstr "도메인 id 또는 도메인명" #: src/virsh.c:2239 msgid "failed to get domain UUID" msgstr "도메인 UUID 보기 실패 " #: src/virsh.c:2250 msgid "migrate domain to another host" msgstr "도메인을 다른 호스트로 이전" #: src/virsh.c:2251 msgid "Migrate domain to another host. Add --live for live migration." msgstr "다른 호스트로 도메인 이전. 실시간 이전일 경우 --live 추가." #: src/virsh.c:2256 msgid "live migration" msgstr "실시간 이전" #: src/virsh.c:2258 msgid "connection URI of the destination host" msgstr "수신지 호스트 연결 URI" #: src/virsh.c:2259 msgid "migration URI, usually can be omitted" msgstr "이전 URI, 주로 생략 가능" #: src/virsh.c:2260 msgid "rename to new name during migration (if supported)" msgstr "" #: src/virsh.c:2283 msgid "migrate: Missing desturi" msgstr "이전: 수신지 uri (desturi) 부재" #: src/virsh.c:2318 msgid "autostart a network" msgstr "네트워크 자동 시작" #: src/virsh.c:2320 msgid "Configure a network to be automatically started at boot." msgstr "부팅 시 자동으로 시작하기 위해 네트워크 설정" #: src/virsh.c:2325 src/virsh.c:2746 msgid "network name or uuid" msgstr "네트워크 이름 또는 uuid" #: src/virsh.c:2347 #, c-format msgid "failed to mark network %s as autostarted" msgstr "자동 시작으로 %s 네트워크를 표시하기 실패" #: src/virsh.c:2350 #, c-format msgid "failed to unmark network %s as autostarted" msgstr "자동 시작으로 %s 네트워크를 표시 해제하기 실패" #: src/virsh.c:2357 #, c-format msgid "Network %s marked as autostarted\n" msgstr "자동 시작으로 %s 네트워크가 표시됨\n" #: src/virsh.c:2359 #, c-format msgid "Network %s unmarked as autostarted\n" msgstr "자동 시작으로 %s 네트워크를 표시하지 않음\n" #: src/virsh.c:2369 msgid "create a network from an XML file" msgstr "XML 파일에서 네트워크 생성" #: src/virsh.c:2370 msgid "Create a network." msgstr "네트워크 생성" #: src/virsh.c:2375 src/virsh.c:2423 msgid "file containing an XML network description" msgstr "XML 네트워크 설명이 있는 파일" #: src/virsh.c:2402 #, c-format msgid "Network %s created from %s\n" msgstr "%s 에서 생성된 %s 네트워크\n" #: src/virsh.c:2405 #, c-format msgid "Failed to create network from %s" msgstr "%s에서 네트워크 생성하기 실패" #: src/virsh.c:2417 msgid "define (but don't start) a network from an XML file" msgstr "XML 파일에서 네트워크를 정의함 (시작하지는 않음)" #: src/virsh.c:2418 msgid "Define a network." msgstr "네트워크 정의" #: src/virsh.c:2450 #, c-format msgid "Network %s defined from %s\n" msgstr "%s에서 정의된 %s 네트워크\n" #: src/virsh.c:2453 #, c-format msgid "Failed to define network from %s" msgstr "%s에서 네트워크 정의하기 실패" #: src/virsh.c:2465 msgid "destroy a network" msgstr "네트워크 강제 종료" #: src/virsh.c:2466 msgid "Destroy a given network." msgstr "주어진 네트워크 강제 종료." #: src/virsh.c:2471 src/virsh.c:2511 src/virsh.c:5572 msgid "network name, id or uuid" msgstr "네트워크 이름, id 또는 uuid" #: src/virsh.c:2489 #, c-format msgid "Network %s destroyed\n" msgstr "%s 네트워크 강제 종료\n" #: src/virsh.c:2491 #, c-format msgid "Failed to destroy network %s" msgstr "%s 네트워크 강제 종료 실패" #: src/virsh.c:2505 msgid "network information in XML" msgstr "XML에 있는 네트워크 정보" #: src/virsh.c:2506 msgid "Output the network information as an XML dump to stdout." msgstr "XML 덤프로서의 네트워크 정보를 표준 출력으로 출력." #: src/virsh.c:2546 msgid "list networks" msgstr "네트워크 목록" #: src/virsh.c:2547 msgid "Returns list of networks." msgstr "네트워크 목록 보기" #: src/virsh.c:2552 msgid "list inactive networks" msgstr "비활성화 네트워크 보기" #: src/virsh.c:2553 msgid "list inactive & active networks" msgstr "비활성화 & 활성화 네트워크 보기" #: src/virsh.c:2573 src/virsh.c:2581 msgid "Failed to list active networks" msgstr "활성화 네트워크 보들기 실패" #: src/virsh.c:2592 src/virsh.c:2600 msgid "Failed to list inactive networks" msgstr "비활성화 네트워크 보기 실패" #: src/virsh.c:2609 src/virsh.c:3411 msgid "Autostart" msgstr "자동 시작" #: src/virsh.c:2624 src/virsh.c:2647 src/virsh.c:3426 src/virsh.c:3449 msgid "no autostart" msgstr "자동 시작 안함" #: src/virsh.c:2630 src/virsh.c:3432 msgid "active" msgstr "활성화" #: src/virsh.c:2653 src/virsh.c:3455 src/virsh.c:3660 msgid "inactive" msgstr "비활성화" #: src/virsh.c:2670 msgid "convert a network UUID to network name" msgstr "네트워크 UUID를 네트워크 이름으로 변환" #: src/virsh.c:2675 msgid "network uuid" msgstr "네트워크 uuid" #: src/virsh.c:2701 msgid "start a (previously defined) inactive network" msgstr "(기존에 정의된) 비활성화 네트워크 시작" #: src/virsh.c:2702 msgid "Start a network." msgstr "네트워크 시작" #: src/virsh.c:2707 msgid "name of the inactive network" msgstr "비활성화 네트워크 이름" #: src/virsh.c:2724 #, c-format msgid "Network %s started\n" msgstr "%s 네트워크 시작\n" #: src/virsh.c:2727 #, c-format msgid "Failed to start network %s" msgstr "%s 네트워크 시작 실패" #: src/virsh.c:2740 msgid "undefine an inactive network" msgstr "비활성화 네트워크를 정의하지 않음" #: src/virsh.c:2741 msgid "Undefine the configuration for an inactive network." msgstr "비활성화 네트워크 설정을 정의하지 않음" #: src/virsh.c:2764 #, c-format msgid "Network %s has been undefined\n" msgstr "%s 네트워크가 정의되지 않음\n" #: src/virsh.c:2766 #, c-format msgid "Failed to undefine network %s" msgstr "%s 네트워크를 정의하지 않기 실패" #: src/virsh.c:2779 msgid "convert a network name to network UUID" msgstr "네트워크 이름을 네트워크 UUID로 변환" #: src/virsh.c:2784 msgid "network name" msgstr "네트워크 이름" #: src/virsh.c:2804 msgid "failed to get network UUID" msgstr "네트워크 UUID 보기 실패" #: src/virsh.c:2815 #, fuzzy msgid "autostart a pool" msgstr "자동으로 도메인 시작" #: src/virsh.c:2817 #, fuzzy msgid "Configure a pool to be automatically started at boot." msgstr "부팅시 자동으로 도메인이 시작되도록 설정함." #: src/virsh.c:2822 src/virsh.c:3153 src/virsh.c:3193 src/virsh.c:3233 #: src/virsh.c:3273 src/virsh.c:3313 src/virsh.c:3631 src/virsh.c:3899 #: src/virsh.c:4035 src/virsh.c:4077 src/virsh.c:4129 src/virsh.c:4171 #: src/virsh.c:4315 src/virsh.c:5590 #, fuzzy msgid "pool name or uuid" msgstr "도메인명 또는 uuid" #: src/virsh.c:2844 #, fuzzy, c-format msgid "failed to mark pool %s as autostarted" msgstr "자동 시작으로 %s 네트워크를 표시하기 실패" #: src/virsh.c:2847 #, fuzzy, c-format msgid "failed to unmark pool %s as autostarted" msgstr "자동 시작으로 %s 네트워크를 표시 해제하기 실패" #: src/virsh.c:2854 #, fuzzy, c-format msgid "Pool %s marked as autostarted\n" msgstr "%s 도메인은 자동 시작으로 표시됨\n" #: src/virsh.c:2856 #, fuzzy, c-format msgid "Pool %s unmarked as autostarted\n" msgstr "%s 도메인이 자동 시작으로 표시되지 않음\n" #: src/virsh.c:2866 #, fuzzy msgid "create a pool from an XML file" msgstr "XML 파일에서 도메인 생성" #: src/virsh.c:2867 src/virsh.c:2915 #, fuzzy msgid "Create a pool." msgstr "도메인 생성" #: src/virsh.c:2873 src/virsh.c:3011 #, fuzzy msgid "file containing an XML pool description" msgstr "XML 도메인 설명이 있는 파일" #: src/virsh.c:2900 #, fuzzy, c-format msgid "Pool %s created from %s\n" msgstr "%s 에서 생성된 도메인 %s\n" #: src/virsh.c:2903 #, fuzzy, c-format msgid "Failed to create pool from %s" msgstr "%s에서 도메인 생성하기 실패" #: src/virsh.c:2914 #, fuzzy msgid "create a pool from a set of args" msgstr "XML 파일에서 도메인 생성" #: src/virsh.c:2920 src/virsh.c:3059 #, fuzzy msgid "name of the pool" msgstr "비활성화 도메인명" #: src/virsh.c:2921 src/virsh.c:3060 msgid "type of the pool" msgstr "" #: src/virsh.c:2922 src/virsh.c:3061 msgid "source-host for underlying storage" msgstr "" #: src/virsh.c:2923 src/virsh.c:3062 msgid "source path for underlying storage" msgstr "" #: src/virsh.c:2924 src/virsh.c:3063 msgid "source device for underlying storage" msgstr "" #: src/virsh.c:2925 src/virsh.c:3065 msgid "target for underlying storage" msgstr "" #: src/virsh.c:2977 src/virsh.c:3119 src/virsh.c:3864 #, fuzzy msgid "Failed to allocate XML buffer" msgstr "버퍼 할당 실패" #: src/virsh.c:2986 #, fuzzy, c-format msgid "Pool %s created\n" msgstr "%s 에서 생성된 도메인 %s\n" #: src/virsh.c:2990 #, fuzzy, c-format msgid "Failed to create pool %s" msgstr "%s에서 도메인 생성하기 실패" #: src/virsh.c:3005 #, fuzzy msgid "define (but don't start) a pool from an XML file" msgstr "XML 파일에서 도메인을 정의함 (시작하지는 않음)" #: src/virsh.c:3006 src/virsh.c:3054 #, fuzzy msgid "Define a pool." msgstr "도메인 정의" #: src/virsh.c:3038 #, fuzzy, c-format msgid "Pool %s defined from %s\n" msgstr "%s에서 정의된 도메인 %s\n" #: src/virsh.c:3041 #, fuzzy, c-format msgid "Failed to define pool from %s" msgstr "%s에서 도메인 정의하기 실패" #: src/virsh.c:3053 msgid "define a pool from a set of args" msgstr "" #: src/virsh.c:3064 msgid "source name for underlying storage" msgstr "" #: src/virsh.c:3128 #, fuzzy, c-format msgid "Pool %s defined\n" msgstr "%s에서 정의된 도메인 %s\n" #: src/virsh.c:3132 #, fuzzy, c-format msgid "Failed to define pool %s" msgstr "도메인 %s를 정의하지 않기 실패" #: src/virsh.c:3147 msgid "build a pool" msgstr "" #: src/virsh.c:3148 msgid "Build a given pool." msgstr "" #: src/virsh.c:3171 #, c-format msgid "Pool %s builded\n" msgstr "" #: src/virsh.c:3173 #, fuzzy, c-format msgid "Failed to build pool %s" msgstr "도메인 %s를 중지하기 실패" #: src/virsh.c:3187 #, fuzzy msgid "destroy a pool" msgstr "도메인 강제 종료 " #: src/virsh.c:3188 #, fuzzy msgid "Destroy a given pool." msgstr "주어진 도메인 강제 종료.." #: src/virsh.c:3211 #, fuzzy, c-format msgid "Pool %s destroyed\n" msgstr "%s 도메인 강제 종료\n" #: src/virsh.c:3213 #, fuzzy, c-format msgid "Failed to destroy pool %s" msgstr "%s 도메인 강제 종료 실패 " #: src/virsh.c:3227 msgid "delete a pool" msgstr "" #: src/virsh.c:3228 #, fuzzy msgid "Delete a given pool." msgstr "주어진 도메인 강제 종료.." #: src/virsh.c:3251 #, fuzzy, c-format msgid "Pool %s deleted\n" msgstr "%s 도메인 강제 종료\n" #: src/virsh.c:3253 #, fuzzy, c-format msgid "Failed to delete pool %s" msgstr "%s 도메인 강제 종료 실패 " #: src/virsh.c:3267 msgid "refresh a pool" msgstr "" #: src/virsh.c:3268 msgid "Refresh a given pool." msgstr "" #: src/virsh.c:3291 #, fuzzy, c-format msgid "Pool %s refreshed\n" msgstr "도메인 %s가 다시 시작됨\n" #: src/virsh.c:3293 #, fuzzy, c-format msgid "Failed to refresh pool %s" msgstr "도메인 %s를 다시 시작하기 실패" #: src/virsh.c:3307 #, fuzzy msgid "pool information in XML" msgstr "XML에 있는 도메인 정보" #: src/virsh.c:3308 #, fuzzy msgid "Output the pool information as an XML dump to stdout." msgstr "XML 덤프로서의 도메인 정보를 표준 출력으로 출력." #: src/virsh.c:3348 #, fuzzy msgid "list pools" msgstr "도메인 목록" #: src/virsh.c:3349 #, fuzzy msgid "Returns list of pools." msgstr "도메인 목록 보기" #: src/virsh.c:3354 #, fuzzy msgid "list inactive pools" msgstr "비활성화 도메인 보기" #: src/virsh.c:3355 #, fuzzy msgid "list inactive & active pools" msgstr "비활성화 & 활성화 도메인 보기" #: src/virsh.c:3375 src/virsh.c:3383 #, fuzzy msgid "Failed to list active pools" msgstr "활성화 도메인 보기 실패" #: src/virsh.c:3394 src/virsh.c:3402 #, fuzzy msgid "Failed to list inactive pools" msgstr "비활성화 도메인 보기 실패" #: src/virsh.c:3471 msgid "find potential storage pool sources" msgstr "" #: src/virsh.c:3472 src/virsh.c:3553 msgid "Returns XML document." msgstr "" #: src/virsh.c:3478 msgid "type of storage pool sources to find" msgstr "" #: src/virsh.c:3479 msgid "optional host to query" msgstr "" #: src/virsh.c:3480 msgid "optional port to query" msgstr "" #: src/virsh.c:3525 #, fuzzy msgid "Out of memory" msgstr "메모리 부족" #: src/virsh.c:3528 #, c-format msgid "asprintf failed (errno %d)" msgstr "" #: src/virsh.c:3537 src/virsh.c:3589 #, fuzzy, c-format msgid "Failed to find any %s pool sources" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/virsh.c:3552 msgid "discover potential storage pool sources" msgstr "" #: src/virsh.c:3559 msgid "type of storage pool sources to discover" msgstr "" #: src/virsh.c:3561 msgid "optional file of source xml to query for pools" msgstr "" #: src/virsh.c:3625 #, fuzzy msgid "storage pool information" msgstr "노드 정보" #: src/virsh.c:3626 #, fuzzy msgid "Returns basic information about the storage pool." msgstr "노드에 관한 기본 정보 보기" #: src/virsh.c:3664 msgid "building" msgstr "" #: src/virsh.c:3668 src/virsh.c:6419 src/virsh.c:6445 msgid "running" msgstr "실행중" #: src/virsh.c:3672 msgid "degraded" msgstr "" #: src/virsh.c:3679 src/virsh.c:4105 msgid "Capacity:" msgstr "" #: src/virsh.c:3682 src/virsh.c:4108 #, fuzzy msgid "Allocation:" msgstr "도메인 할당 중" #: src/virsh.c:3685 msgid "Available:" msgstr "" #: src/virsh.c:3701 #, fuzzy msgid "convert a pool UUID to pool name" msgstr "네트워크 UUID를 네트워크 이름으로 변환" #: src/virsh.c:3706 #, fuzzy msgid "pool uuid" msgstr "도메인 uuid" #: src/virsh.c:3732 #, fuzzy msgid "start a (previously defined) inactive pool" msgstr "(기존에 정의된) 비활성화 도메인 시작" #: src/virsh.c:3733 #, fuzzy msgid "Start a pool." msgstr "도메인 시작" #: src/virsh.c:3738 #, fuzzy msgid "name of the inactive pool" msgstr "비활성화 도메인명" #: src/virsh.c:3755 #, fuzzy, c-format msgid "Pool %s started\n" msgstr "도메인 %s가 시작됨\n" #: src/virsh.c:3758 #, fuzzy, c-format msgid "Failed to start pool %s" msgstr "도메인 %s 시작하기 실패" #: src/virsh.c:3771 #, fuzzy msgid "create a volume from a set of args" msgstr "XML 파일에서 도메인 생성" #: src/virsh.c:3772 src/virsh.c:3971 #, fuzzy msgid "Create a vol." msgstr "도메인 생성" #: src/virsh.c:3778 #, fuzzy msgid "name of the volume" msgstr "비활성화 도메인명" #: src/virsh.c:3779 msgid "size of the vol with optional k,M,G,T suffix" msgstr "" #: src/virsh.c:3780 msgid "initial allocation size with optional k,M,G,T suffix" msgstr "" #: src/virsh.c:3781 msgid "file format type raw,bochs,qcow,qcow2,vmdk" msgstr "" #: src/virsh.c:3839 src/virsh.c:3844 #, c-format msgid "Malformed size %s" msgstr "" #: src/virsh.c:3873 #, fuzzy, c-format msgid "Vol %s created\n" msgstr "%s 에서 생성된 도메인 %s\n" #: src/virsh.c:3877 #, fuzzy, c-format msgid "Failed to create vol %s" msgstr "XML 생성하기 실패" #: src/virsh.c:3893 #, fuzzy msgid "undefine an inactive pool" msgstr "비활성화 도메인을 정의하지 않음" #: src/virsh.c:3894 #, fuzzy msgid "Undefine the configuration for an inactive pool." msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: src/virsh.c:3917 #, fuzzy, c-format msgid "Pool %s has been undefined\n" msgstr "도메인 %s는 정의되지 않음\n" #: src/virsh.c:3919 #, fuzzy, c-format msgid "Failed to undefine pool %s" msgstr "도메인 %s를 정의하지 않기 실패" #: src/virsh.c:3932 #, fuzzy msgid "convert a pool name to pool UUID" msgstr "네트워크 이름을 네트워크 UUID로 변환" #: src/virsh.c:3957 #, fuzzy msgid "failed to get pool UUID" msgstr "도메인 UUID 보기 실패 " #: src/virsh.c:3970 #, fuzzy msgid "create a vol from an XML file" msgstr "XML 파일에서 도메인 생성" #: src/virsh.c:3977 #, fuzzy msgid "file containing an XML vol description" msgstr "XML 도메인 설명이 있는 파일" #: src/virsh.c:4014 #, fuzzy, c-format msgid "Vol %s created from %s\n" msgstr "%s 에서 생성된 도메인 %s\n" #: src/virsh.c:4018 #, fuzzy, c-format msgid "Failed to create vol from %s" msgstr "%s에서 도메인 생성하기 실패" #: src/virsh.c:4029 msgid "delete a vol" msgstr "" #: src/virsh.c:4030 #, fuzzy msgid "Delete a given vol." msgstr "주어진 도메인 강제 종료.." #: src/virsh.c:4036 src/virsh.c:4078 src/virsh.c:4130 msgid "vol name, key or path" msgstr "" #: src/virsh.c:4055 #, fuzzy, c-format msgid "Vol %s deleted\n" msgstr "%s 도메인 강제 종료\n" #: src/virsh.c:4057 #, fuzzy, c-format msgid "Failed to delete vol %s" msgstr "%s 도메인 강제 종료 실패 " #: src/virsh.c:4071 #, fuzzy msgid "storage vol information" msgstr "노드 정보" #: src/virsh.c:4072 #, fuzzy msgid "Returns basic information about the storage vol." msgstr "노드에 관한 기본 정보 보기" #: src/virsh.c:4100 #, fuzzy msgid "Type:" msgstr "OS 유형:" #: src/virsh.c:4102 #, fuzzy msgid "file" msgstr "XML 파일" #: src/virsh.c:4102 #, fuzzy msgid "block" msgstr "차단됨" #: src/virsh.c:4123 #, fuzzy msgid "vol information in XML" msgstr "XML에 있는 도메인 정보" #: src/virsh.c:4124 #, fuzzy msgid "Output the vol information as an XML dump to stdout." msgstr "XML 덤프로서의 도메인 정보를 표준 출력으로 출력." #: src/virsh.c:4165 #, fuzzy msgid "list vols" msgstr "도메인 목록" #: src/virsh.c:4166 #, fuzzy msgid "Returns list of vols by pool." msgstr "도메인 목록 보기" #: src/virsh.c:4191 src/virsh.c:4199 #, fuzzy msgid "Failed to list active vols" msgstr "활성화 도메인 보기 실패" #: src/virsh.c:4207 msgid "Path" msgstr "" #: src/virsh.c:4244 #, fuzzy msgid "convert a vol UUID to vol name" msgstr "네트워크 UUID를 네트워크 이름으로 변환" #: src/virsh.c:4249 msgid "vol key or path" msgstr "" #: src/virsh.c:4277 #, fuzzy msgid "convert a vol UUID to vol key" msgstr "네트워크 UUID를 네트워크 이름으로 변환" #: src/virsh.c:4282 #, fuzzy msgid "vol uuid" msgstr "도메인 uuid" #: src/virsh.c:4310 #, fuzzy msgid "convert a vol UUID to vol path" msgstr "네트워크 UUID를 네트워크 이름으로 변환" #: src/virsh.c:4316 msgid "vol name or key" msgstr "" #: src/virsh.c:4347 msgid "show version" msgstr "버전 보여주기" #: src/virsh.c:4348 msgid "Display the system version information." msgstr "시스템 버전 정보 보여주기." #: src/virsh.c:4371 msgid "failed to get hypervisor type" msgstr "하이퍼바이저 유형 보기 실패" #: src/virsh.c:4380 #, c-format msgid "Compiled against library: libvir %d.%d.%d\n" msgstr "라이브러리에 대해 컴파일됨: libvir %d.%d.%d\n" #: src/virsh.c:4385 msgid "failed to get the library version" msgstr "라이브러리 버전 보기 실패" #: src/virsh.c:4392 #, c-format msgid "Using library: libvir %d.%d.%d\n" msgstr "사용중인 라이브러리: libvir %d.%d.%d\n" #: src/virsh.c:4399 #, c-format msgid "Using API: %s %d.%d.%d\n" msgstr "사용중인 API: %s %d.%d.%d\n" #: src/virsh.c:4404 msgid "failed to get the hypervisor version" msgstr "하이퍼바이저 버전 보기 실패" #: src/virsh.c:4409 #, c-format msgid "Cannot extract running %s hypervisor version\n" msgstr "실행중인 %s 하이퍼바이저 버전을 추출할 수 없음\n" #: src/virsh.c:4416 #, c-format msgid "Running hypervisor: %s %d.%d.%d\n" msgstr "실행중인 하이퍼바이저: %s %d.%d.%d\n" #: src/virsh.c:4427 #, fuzzy msgid "enumerate devices on this host" msgstr "도메인을 다른 호스트로 이전" #: src/virsh.c:4432 #, fuzzy msgid "capability name" msgstr "기능" #: src/virsh.c:4452 #, fuzzy msgid "Failed to count node devices" msgstr "하이퍼바이저에 연결하기 실패" #: src/virsh.c:4462 #, fuzzy msgid "Failed to list node devices" msgstr "비활성화 도메인 보기 실패" #: src/virsh.c:4480 msgid "node device details in XML" msgstr "" #: src/virsh.c:4481 #, fuzzy msgid "Output the node device details as an XML dump to stdout." msgstr "XML 덤프로서의 네트워크 정보를 표준 출력으로 출력." #: src/virsh.c:4487 msgid "device key" msgstr "" #: src/virsh.c:4502 msgid "Could not find matching device" msgstr "" #: src/virsh.c:4516 msgid "print the hypervisor hostname" msgstr "하이퍼바이저 호스트명 인쇄" #: src/virsh.c:4530 msgid "failed to get hostname" msgstr "호스트명 보기 실패" #: src/virsh.c:4545 msgid "print the hypervisor canonical URI" msgstr "하이퍼바이저 정규 URI 인쇄" #: src/virsh.c:4559 msgid "failed to get URI" msgstr "URI 보기 실패" #: src/virsh.c:4574 msgid "vnc display" msgstr "vnc 화면" #: src/virsh.c:4575 msgid "Output the IP address and port number for the VNC display." msgstr "VNC 화면의 IP 주소 및 포트 번호 출력" #: src/virsh.c:4650 msgid "tty console" msgstr "tty 콘솔" #: src/virsh.c:4651 msgid "Output the device for the TTY console." msgstr "TTY 콘솔에 대한 장치 출력" #: src/virsh.c:4711 msgid "attach device from an XML file" msgstr "XML 파일에서 장치 부착" #: src/virsh.c:4712 msgid "Attach device from an XML ." msgstr "XML 파일에서 장치 부착 ." #: src/virsh.c:4718 src/virsh.c:4777 msgid "XML file" msgstr "XML 파일" #: src/virsh.c:4739 msgid "attach-device: Missing option" msgstr "" #: src/virsh.c:4753 #, c-format msgid "Failed to attach device from %s" msgstr "%s에서 장치 부착하기 실패" #: src/virsh.c:4757 msgid "Device attached successfully\n" msgstr "" #: src/virsh.c:4770 msgid "detach device from an XML file" msgstr "XML 파일에서 분리 장치" #: src/virsh.c:4771 msgid "Detach device from an XML " msgstr "XML 파일에서의 분리 장치 " #: src/virsh.c:4798 msgid "detach-device: Missing option" msgstr "" #: src/virsh.c:4812 #, c-format msgid "Failed to detach device from %s" msgstr "%s에서 장치 분리 실패" #: src/virsh.c:4816 msgid "Device detached successfully\n" msgstr "" #: src/virsh.c:4829 msgid "attach network interface" msgstr "네트워크 인터페이스 부착" #: src/virsh.c:4830 msgid "Attach new network interface." msgstr "새 네트워크 인터페이스 부착" #: src/virsh.c:4836 src/virsh.c:4953 msgid "network interface type" msgstr "네트워크 인터페이스 유형" #: src/virsh.c:4837 msgid "source of network interface" msgstr "네트워크 인터페이스 소스" #: src/virsh.c:4838 msgid "target network name" msgstr "대상 네트워크 이름" #: src/virsh.c:4839 src/virsh.c:4954 #, fuzzy msgid "MAC address" msgstr "MAC 주소" #: src/virsh.c:4840 msgid "script used to bridge network interface" msgstr "네트워크 인터페이스를 연결하기 위해 사용된 스크립트" #: src/virsh.c:4872 #, c-format msgid "No support %s in command 'attach-interface'" msgstr "'attach-interface' 명령에서 %s을(를) 지원하지 않음" #: src/virsh.c:4928 msgid "Interface attached successfully\n" msgstr "" #: src/virsh.c:4946 msgid "detach network interface" msgstr "네트워크 인터페이스 분리" #: src/virsh.c:4947 msgid "Detach network interface." msgstr "네트워크 인터페이스 분리" #: src/virsh.c:4992 src/virsh.c:4997 msgid "Failed to get interface information" msgstr "인터페이스 정보 보기 실패" #: src/virsh.c:5005 #, c-format msgid "No found interface whose type is %s" msgstr "유형이 %s인 인터페이스를 찾을 수 없음" #: src/virsh.c:5027 #, c-format msgid "No found interface whose MAC address is %s" msgstr "MAC 주소가 %s인 인터페이스를 찾을 수 없음" #: src/virsh.c:5033 src/virsh.c:5311 msgid "Failed to allocate memory" msgstr "메모리 할당 실패" #: src/virsh.c:5038 src/virsh.c:5316 msgid "Failed to create XML" msgstr "XML 생성하기 실패" #: src/virsh.c:5046 msgid "Interface detached successfully\n" msgstr "" #: src/virsh.c:5067 msgid "attach disk device" msgstr "디스크 장치 부착" #: src/virsh.c:5068 msgid "Attach new disk device." msgstr "새 디스크 장치 부착" #: src/virsh.c:5074 msgid "source of disk device" msgstr "디스크 장치의 소스" #: src/virsh.c:5075 src/virsh.c:5239 msgid "target of disk device" msgstr "디스크 장치의 대상" #: src/virsh.c:5076 msgid "driver of disk device" msgstr "디스크 장치의 드라이버" #: src/virsh.c:5077 msgid "subdriver of disk device" msgstr "디스크 장치의 하부 드라이버" #: src/virsh.c:5078 msgid "target device type" msgstr "대상 장치 유형" #: src/virsh.c:5079 msgid "mode of device reading and writing" msgstr "읽기 및 쓰기 장치 모드" #: src/virsh.c:5110 src/virsh.c:5119 src/virsh.c:5126 #, c-format msgid "No support %s in command 'attach-disk'" msgstr "'attach-disk' 명령에서 %s을(를) 지원하지 않음" #: src/virsh.c:5215 msgid "Disk attached successfully\n" msgstr "" #: src/virsh.c:5232 msgid "detach disk device" msgstr "디스크 장치 분리" #: src/virsh.c:5233 msgid "Detach disk device." msgstr "디스크 장치 분리" #: src/virsh.c:5274 src/virsh.c:5279 src/virsh.c:5286 msgid "Failed to get disk information" msgstr "디스크 정보 보기 실패" #: src/virsh.c:5305 #, c-format msgid "No found disk whose target is %s" msgstr "대상이 %s인 디스크를 찾을 수 없음" #: src/virsh.c:5324 msgid "Disk detached successfully\n" msgstr "" #: src/virsh.c:5351 #, fuzzy, c-format msgid "malloc: failed to allocate temporary file name: %s" msgstr "노드 할당 실패" #: src/virsh.c:5362 #, fuzzy, c-format msgid "mkstemp: failed to create temporary file: %s" msgstr "로그 파일 쓰기 실패" #: src/virsh.c:5369 #, fuzzy, c-format msgid "write: %s: failed to write to temporary file: %s" msgstr "로그 파일 쓰기 실패" #: src/virsh.c:5378 #, fuzzy, c-format msgid "close: %s: failed to write or close temporary file: %s" msgstr "로그 파일 쓰기 실패" #: src/virsh.c:5408 #, c-format msgid "" "%s: $EDITOR environment variable contains shell meta or other unacceptable " "characters" msgstr "" #: src/virsh.c:5415 #, c-format msgid "" "%s: temporary filename contains shell meta or other unacceptable characters " "(is $TMPDIR wrong?)" msgstr "" #: src/virsh.c:5422 #, fuzzy, c-format msgid "asprintf: could not create editing command: %s" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/virsh.c:5430 #, fuzzy, c-format msgid "%s: edit command failed: %s" msgstr "로그 파일 쓰기 실패" #: src/virsh.c:5436 #, c-format msgid "%s: command exited with non-zero status" msgstr "" #: src/virsh.c:5451 #, fuzzy, c-format msgid "%s: failed to read temporary file: %s" msgstr "로그 파일 쓰기 실패" #: src/virsh.c:5463 #, fuzzy msgid "edit XML configuration for a domain" msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: src/virsh.c:5464 #, fuzzy msgid "Edit the XML configuration for a domain." msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: src/virsh.c:5514 #, c-format msgid "Domain %s XML configuration not changed.\n" msgstr "" #: src/virsh.c:5530 msgid "ERROR: the XML configuration was changed by another user" msgstr "" #: src/virsh.c:5540 #, fuzzy, c-format msgid "Domain %s XML configuration edited.\n" msgstr "설정 파일 읽기 실패" #: src/virsh.c:5566 #, fuzzy msgid "edit XML configuration for a network" msgstr "비활성화 네트워크 설정을 정의하지 않음" #: src/virsh.c:5567 #, fuzzy msgid "Edit the XML configuration for a network." msgstr "비활성화 네트워크 설정을 정의하지 않음" #: src/virsh.c:5584 #, fuzzy msgid "edit XML configuration for a storage pool" msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: src/virsh.c:5585 #, fuzzy msgid "Edit the XML configuration for a storage pool." msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: src/virsh.c:5602 msgid "quit this interactive terminal" msgstr "대화식 터미널 종료" #: src/virsh.c:5783 #, c-format msgid "command '%s' requires <%s> option" msgstr "'%s' 명령은 <%s> 옵션이 필요함" #: src/virsh.c:5784 #, c-format msgid "command '%s' requires --%s option" msgstr "'%s' 명령은 --%s 옵션이 필요함" #: src/virsh.c:5811 #, c-format msgid "command '%s' doesn't exist" msgstr "'%s' 명령이 존재하지 않음" #: src/virsh.c:5819 msgid " NAME\n" msgstr " 이름\n" #: src/virsh.c:5823 msgid "" "\n" " SYNOPSIS\n" msgstr "" "\n" " 시놉시스\n" #: src/virsh.c:5830 msgid "" "\n" " DESCRIPTION\n" msgstr "" "\n" " 설명\n" #: src/virsh.c:5834 msgid "" "\n" " OPTIONS\n" msgstr "" "\n" " 옵션\n" #: src/virsh.c:5841 #, c-format msgid "--%s " msgstr "--%s " #: src/virsh.c:5843 #, c-format msgid "--%s " msgstr "--%s " #: src/virsh.c:5987 msgid "undefined domain name or id" msgstr "정의되지 않은 도메인명 또는 id" #: src/virsh.c:6019 #, c-format msgid "failed to get domain '%s'" msgstr "'%s' 도메인 보기 실패" #: src/virsh.c:6032 msgid "undefined network name" msgstr "정의되지 않은 네트워크 이름" #: src/virsh.c:6056 #, c-format msgid "failed to get network '%s'" msgstr "'%s' 네트워크 보기 실패" #: src/virsh.c:6069 src/virsh.c:6115 #, fuzzy msgid "undefined pool name" msgstr "정의되지 않은 네트워크 이름" #: src/virsh.c:6093 #, fuzzy, c-format msgid "failed to get pool '%s'" msgstr "'%s' 도메인 보기 실패" #: src/virsh.c:6110 #, fuzzy msgid "undefined vol name" msgstr "정의되지 않은 네트워크 이름" #: src/virsh.c:6146 #, fuzzy, c-format msgid "failed to get vol '%s'" msgstr "'%s' 도메인 보기 실패" #: src/virsh.c:6177 #, c-format msgid "" "\n" "(Time: %.3f ms)\n" "\n" msgstr "" "\n" "(시간: %.3f ms)\n" "\n" #: src/virsh.c:6251 msgid "missing \"" msgstr "부재 \"" #: src/virsh.c:6312 #, c-format msgid "unexpected token (command name): '%s'" msgstr "예상외의 토큰 (명령 이름): '%s'" #: src/virsh.c:6317 #, c-format msgid "unknown command: '%s'" msgstr "알려지지 않은 명령: '%s'" #: src/virsh.c:6324 #, c-format msgid "command '%s' doesn't support option --%s" msgstr "명령 '%s'는 --%s 옵션을 지원하지 않음" #: src/virsh.c:6339 #, c-format msgid "expected syntax: --%s <%s>" msgstr "예상된 구문: --%s <%s>" #: src/virsh.c:6342 msgid "number" msgstr "숫자" #: src/virsh.c:6342 msgid "string" msgstr "문자열" #: src/virsh.c:6348 #, c-format msgid "unexpected data '%s'" msgstr "예상외의 데이터 '%s'" #: src/virsh.c:6370 msgid "OPTION" msgstr "옵션" #: src/virsh.c:6370 msgid "DATA" msgstr "데이터" #: src/virsh.c:6421 src/virsh.c:6443 msgid "idle" msgstr "" #: src/virsh.c:6423 msgid "paused" msgstr "중지됨" #: src/virsh.c:6425 msgid "in shutdown" msgstr "종료중" #: src/virsh.c:6427 msgid "shut off" msgstr "종료" #: src/virsh.c:6429 msgid "crashed" msgstr "충돌됨" #: src/virsh.c:6441 msgid "offline" msgstr "오프라인" #: src/virsh.c:6460 msgid "no valid connection" msgstr "유효하지 않은 연결" #: src/virsh.c:6507 #, c-format msgid "%s: error: " msgstr "%s: 오류:" #: src/virsh.c:6509 msgid "error: " msgstr "오류:" #: src/virsh.c:6531 src/virsh.c:6543 src/virsh.c:6556 #, c-format msgid "%s: %d: failed to allocate %d bytes" msgstr "%s: %d: %d 바이트 할당 실패" #: src/virsh.c:6570 #, c-format msgid "%s: %d: failed to allocate %lu bytes" msgstr "%s: %d: %lu 바이트 할당 실패" #: src/virsh.c:6599 msgid "failed to connect to the hypervisor" msgstr "하이퍼바이저에 연결 실패" #: src/virsh.c:6631 msgid "failed to get the log file information" msgstr "로그 파일 정보 보기 실패" #: src/virsh.c:6636 msgid "the log path is not a file" msgstr "로그 경로가 파일이 아님" #: src/virsh.c:6643 msgid "failed to open the log file. check the log file path" msgstr "로그 파일 열기 실패. 로그 파일 경로 확인" #: src/virsh.c:6711 msgid "failed to write the log file" msgstr "로그 파일 쓰기 실패" #: src/virsh.c:6726 #, fuzzy, c-format msgid "%s: failed to write log file: %s" msgstr "로그 파일 쓰기 실패" #: src/virsh.c:6903 #, fuzzy msgid "failed to disconnect from the hypervisor" msgstr "하이퍼바이저에서 연결 끊기 실패" #: src/virsh.c:6921 #, c-format msgid "" "\n" "%s [options] [commands]\n" "\n" " options:\n" " -c | --connect hypervisor connection URI\n" " -r | --readonly connect readonly\n" " -d | --debug debug level [0-5]\n" " -h | --help this help\n" " -q | --quiet quiet mode\n" " -t | --timing print timing information\n" " -l | --log output logging to file\n" " -v | --version program version\n" "\n" " commands (non interactive mode):\n" msgstr "" "\n" "%s [옵션] [명령]\n" "\n" " 옵션:\n" " -c | --connect 하이퍼바이저 연결 URI\n" " -r | --readonly 읽기 전용 연결\n" " -d | --debug 디버그 레벨 [0-5]\n" " -h | --help 도움말\n" " -q | --quiet 정숙 모드\n" " -t | --timing 시간 정보 인쇄\n" " -l | --log 파일에 출력 기록\n" " -v | --version 프로그램 버전\n" "\n" " 명령 (비대화식 모드):\n" #: src/virsh.c:6939 msgid "" "\n" " (specify help for details about the command)\n" "\n" msgstr "" "\n" " (명령에 대한 정보를 보기 위해 help 를 지정)\n" "\n" #: src/virsh.c:7035 #, c-format msgid "unsupported option '-%c'. See --help." msgstr "지원되지 않는 옵션 '-%c'. --help 참조." #: src/virsh.c:7121 #, c-format msgid "" "Welcome to %s, the virtualization interactive terminal.\n" "\n" msgstr "" "%s, 가상화 대화식 터미널에 오신 것을 환영합니다.\n" "\n" #: src/virsh.c:7124 msgid "" "Type: 'help' for help with commands\n" " 'quit' to quit\n" "\n" msgstr "" "입력: 명령을 사용하여 문제 해결을 위해 'help' 입력\n" " 종료하기 위해 'quit'입력\n" "\n" #: src/virterror.c:243 msgid "warning" msgstr "경고" #: src/virterror.c:246 msgid "error" msgstr "오류" #: src/virterror.c:389 msgid "No error message provided" msgstr "오류 메세지 없음" #: src/virterror.c:444 #, c-format msgid "internal error %s" msgstr "내부 오류 %s" #: src/virterror.c:446 msgid "internal error" msgstr "내부 오류" #: src/virterror.c:453 msgid "this function is not supported by the hypervisor" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/virterror.c:455 #, c-format msgid "this function is not supported by the hypervisor: %s" msgstr "이 기능은 하이퍼바이저로 지원되지 않음: %s" #: src/virterror.c:459 msgid "could not connect to hypervisor" msgstr "하이퍼바이저에 연결할 수 없음" #: src/virterror.c:461 #, c-format msgid "could not connect to %s" msgstr "%s에 연결할 수 없음" #: src/virterror.c:465 msgid "invalid connection pointer in" msgstr "잘못된 연결 포인터" #: src/virterror.c:467 #, c-format msgid "invalid connection pointer in %s" msgstr "%s에 있는 잘못된 연결 포인터" #: src/virterror.c:471 msgid "invalid domain pointer in" msgstr "잘못된 도메인 포인터" #: src/virterror.c:473 #, c-format msgid "invalid domain pointer in %s" msgstr "%s에 있는 잘못된 도메인 포인터" #: src/virterror.c:477 msgid "invalid argument in" msgstr "잘못된 인수" #: src/virterror.c:479 #, c-format msgid "invalid argument in %s" msgstr "%s에 있는 잘못된 인수" #: src/virterror.c:483 #, c-format msgid "operation failed: %s" msgstr "작업 실패: %s" #: src/virterror.c:485 msgid "operation failed" msgstr "작업 실패" #: src/virterror.c:489 #, c-format msgid "GET operation failed: %s" msgstr "GET 작업 실패: %s" #: src/virterror.c:491 msgid "GET operation failed" msgstr "GET 작업 실패" #: src/virterror.c:495 #, c-format msgid "POST operation failed: %s" msgstr "POST 작업 실패: %s" #: src/virterror.c:497 msgid "POST operation failed" msgstr "POST 작업 실패" #: src/virterror.c:500 #, c-format msgid "got unknown HTTP error code %d" msgstr "알려지지 않은 HTTP 오류 코드 %d가 있음" #: src/virterror.c:504 #, c-format msgid "unknown host %s" msgstr "알려지지 않은 호스트 %s" #: src/virterror.c:506 msgid "unknown host" msgstr "알려지지 않은 호스트" #: src/virterror.c:510 #, c-format msgid "failed to serialize S-Expr: %s" msgstr "S-Expr 나열하기 실패: %s" #: src/virterror.c:512 msgid "failed to serialize S-Expr" msgstr "S-Expr 나열하기 실패" #: src/virterror.c:516 msgid "could not use Xen hypervisor entry" msgstr "Xen 하이퍼바이저 항목을 사용할 수 없음" #: src/virterror.c:518 #, c-format msgid "could not use Xen hypervisor entry %s" msgstr "Xen 하이퍼바이저 항목 %s을 사용할 수 없음" #: src/virterror.c:522 msgid "could not connect to Xen Store" msgstr "Xen Store에 연결할 수 없음" #: src/virterror.c:524 #, c-format msgid "could not connect to Xen Store %s" msgstr "Xen Store %s에 연결할 수 없음" #: src/virterror.c:527 #, fuzzy, c-format msgid "failed Xen syscall %s" msgstr "Xen syscall %s %d 실패" #: src/virterror.c:531 msgid "unknown OS type" msgstr "알려지지 않은 OS 유형" #: src/virterror.c:533 #, c-format msgid "unknown OS type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/virterror.c:536 msgid "missing kernel information" msgstr "커널 정보 부재" #: src/virterror.c:540 msgid "missing root device information" msgstr "root 장치 정보 부재" #: src/virterror.c:542 #, c-format msgid "missing root device information in %s" msgstr "%s에 있는 root 장치 정보 부재" #: src/virterror.c:546 msgid "missing source information for device" msgstr "장치의 소스 정보 부재" #: src/virterror.c:548 #, c-format msgid "missing source information for device %s" msgstr "%s 장치의 소스 정보 부재" #: src/virterror.c:552 msgid "missing target information for device" msgstr "장치의 대상 정보 부재" #: src/virterror.c:554 #, c-format msgid "missing target information for device %s" msgstr "%s 장치의 대상 정보 부재" #: src/virterror.c:558 msgid "missing domain name information" msgstr "도메인 이름 정보 부재" #: src/virterror.c:560 #, c-format msgid "missing domain name information in %s" msgstr "%s에 있는 도메인 이름 정보 부재" #: src/virterror.c:564 msgid "missing operating system information" msgstr "운영 시스템 정보 부재" #: src/virterror.c:566 #, c-format msgid "missing operating system information for %s" msgstr "%s의 운영 시스템 정보 부재" #: src/virterror.c:570 msgid "missing devices information" msgstr "장치 정보 부재" #: src/virterror.c:572 #, c-format msgid "missing devices information for %s" msgstr "%s의 장치 정보 부재" #: src/virterror.c:576 msgid "too many drivers registered" msgstr "과도한 드라이버가 등록됨" #: src/virterror.c:578 #, c-format msgid "too many drivers registered in %s" msgstr "과도한 드라이버가 %s에 등록됨" #: src/virterror.c:582 msgid "library call failed, possibly not supported" msgstr "라이브러리가 지원되지 않아 라이브러리 호출 실패" #: src/virterror.c:584 #, c-format msgid "library call %s failed, possibly not supported" msgstr "라이브러리가 지원되지 않아 %s 라이브러리 호출 실패" #: src/virterror.c:588 msgid "XML description not well formed or invalid" msgstr "XML 설명이 잘 작성되지 않았거나 유효하지 않음" #: src/virterror.c:590 #, c-format msgid "XML description for %s is not well formed or invalid" msgstr "%s에 대한 XML 설명이 잘 작성되지 않았거나 유효하지 않음" #: src/virterror.c:594 msgid "this domain exists already" msgstr "이미 도메인이 존재함" #: src/virterror.c:596 #, c-format msgid "domain %s exists already" msgstr "이미 %s 도메인이 존재함" #: src/virterror.c:600 msgid "operation forbidden for read only access" msgstr "읽기 전용 액세스에 대해 작업이 허용되지 않음" #: src/virterror.c:602 #, c-format msgid "operation %s forbidden for read only access" msgstr "읽기 전용 액세스에 대해 %s 작업이 허용되지 않음" #: src/virterror.c:606 msgid "failed to open configuration file for reading" msgstr "읽기 용 설정 파일 열기 실패" #: src/virterror.c:608 #, c-format msgid "failed to open %s for reading" msgstr "읽기 용 %s 열기 실패" #: src/virterror.c:612 msgid "failed to read configuration file" msgstr "설정 파일 읽기 실패" #: src/virterror.c:614 #, c-format msgid "failed to read configuration file %s" msgstr "%s 설정 파일 읽기 실패" #: src/virterror.c:618 msgid "failed to parse configuration file" msgstr "설정 파일 구문 분석 실패" #: src/virterror.c:620 #, c-format msgid "failed to parse configuration file %s" msgstr "%s 설정 파일 구문 분석 실패" #: src/virterror.c:624 msgid "configuration file syntax error" msgstr "설정 파일 구문 오류" #: src/virterror.c:626 #, c-format msgid "configuration file syntax error: %s" msgstr "설정 파일 구문 오류: %s" #: src/virterror.c:630 msgid "failed to write configuration file" msgstr "설정 파일 쓰기 실패" #: src/virterror.c:632 #, c-format msgid "failed to write configuration file: %s" msgstr "설정 파일 쓰기 실패: %s" #: src/virterror.c:636 msgid "parser error" msgstr "구문 분석 오류" #: src/virterror.c:642 msgid "invalid network pointer in" msgstr "잘못된 네트워크 포인터" #: src/virterror.c:644 #, c-format msgid "invalid network pointer in %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/virterror.c:648 msgid "this network exists already" msgstr "이미 네트워크가 있음" #: src/virterror.c:650 #, c-format msgid "network %s exists already" msgstr "이미 네트워크 %s이(가) 있음" #: src/virterror.c:654 msgid "system call error" msgstr "시스템 호출 오류" #: src/virterror.c:660 msgid "RPC error" msgstr "RPC 오류" #: src/virterror.c:666 msgid "GNUTLS call error" msgstr "GNUTLS 호출 오류" #: src/virterror.c:672 msgid "Failed to find the network" msgstr "네트워크 찾기 실패" #: src/virterror.c:674 #, c-format msgid "Failed to find the network: %s" msgstr "네트워크 찾기 실패: %s" #: src/virterror.c:678 msgid "Domain not found" msgstr "도메인을 찾을 수 없음" #: src/virterror.c:680 #, c-format msgid "Domain not found: %s" msgstr "도메인을 찾을 수 없음: %s" #: src/virterror.c:684 msgid "Network not found" msgstr "네트워크를 찾을 수 없음" #: src/virterror.c:686 #, c-format msgid "Network not found: %s" msgstr "네트워크를 찾을 수 없음: %s" #: src/virterror.c:690 #, fuzzy msgid "invalid MAC address" msgstr "잘못된 MAC 주소" #: src/virterror.c:692 #, fuzzy, c-format msgid "invalid MAC address: %s" msgstr "잘못된 MAC 주소: %s" #: src/virterror.c:696 #, fuzzy msgid "authentication failed" msgstr "작업 실패" #: src/virterror.c:698 #, fuzzy, c-format msgid "authentication failed: %s" msgstr "작업 실패: %s" #: src/virterror.c:702 #, fuzzy msgid "Storage pool not found" msgstr "네트워크를 찾을 수 없음" #: src/virterror.c:704 #, fuzzy, c-format msgid "Storage pool not found: %s" msgstr "네트워크를 찾을 수 없음: %s" #: src/virterror.c:708 #, fuzzy msgid "Storage volume not found" msgstr "네트워크를 찾을 수 없음" #: src/virterror.c:710 #, fuzzy, c-format msgid "Storage volume not found: %s" msgstr "네트워크를 찾을 수 없음: %s" #: src/virterror.c:714 #, fuzzy msgid "invalid storage pool pointer in" msgstr "잘못된 네트워크 포인터" #: src/virterror.c:716 #, fuzzy, c-format msgid "invalid storage pool pointer in %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/virterror.c:720 #, fuzzy msgid "invalid storage volume pointer in" msgstr "잘못된 네트워크 포인터" #: src/virterror.c:722 #, fuzzy, c-format msgid "invalid storage volume pointer in %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/virterror.c:726 #, fuzzy msgid "Failed to find a storage driver" msgstr "네트워크 찾기 실패" #: src/virterror.c:728 #, fuzzy, c-format msgid "Failed to find a storage driver: %s" msgstr "네트워크 찾기 실패: %s" #: src/virterror.c:732 #, fuzzy msgid "Failed to find a node driver" msgstr "네트워크 찾기 실패" #: src/virterror.c:734 #, fuzzy, c-format msgid "Failed to find a node driver: %s" msgstr "네트워크 찾기 실패: %s" #: src/virterror.c:738 #, fuzzy msgid "invalid node device pointer" msgstr "잘못된 도메인 포인터" #: src/virterror.c:740 #, fuzzy, c-format msgid "invalid node device pointer in %s" msgstr "%s에 있는 잘못된 도메인 포인터" #: src/virterror.c:744 #, fuzzy msgid "Node device not found" msgstr "도메인을 찾을 수 없음" #: src/virterror.c:746 #, fuzzy, c-format msgid "Node device not found: %s" msgstr "도메인을 찾을 수 없음: %s" #: src/xen_inotify.c:152 msgid "finding dom on config list" msgstr "" #: src/xen_inotify.c:221 #, fuzzy msgid "Error looking up domain" msgstr "도메인 할당 중" #: src/xen_inotify.c:228 src/xen_inotify.c:316 src/xen_inotify.c:322 msgid "Error adding file to config cache" msgstr "" #: src/xen_inotify.c:271 msgid "conn, or private data is NULL" msgstr "" #: src/xen_inotify.c:305 src/xen_inotify.c:328 msgid "looking up dom" msgstr "" #: src/xen_inotify.c:371 #, fuzzy msgid "failed to allocate configInfoList" msgstr "노드 할당 실패" #: src/xen_inotify.c:394 msgid "Error adding file to config list" msgstr "" #: src/xen_inotify.c:403 msgid "initializing inotify" msgstr "" #: src/xen_internal.c:1284 #, c-format msgid "Credit scheduler weight parameter (%d) is out of range (1-65535)" msgstr "크레딧 스케줄러의 weight 매개 변수 (%d) 범위 (1-65535) 초과" #: src/xen_internal.c:1294 #, c-format msgid "Credit scheduler cap parameter (%d) is out of range (0-65535)" msgstr "크레딧 스케줄러의 cap 매개 변수 (%d) 범위 (0-65535) 초과" #: src/xen_internal.c:2485 #, c-format msgid "allocating %d domain info" msgstr "%d 도메인 정보 할당 중" #: src/xend_internal.c:136 #, fuzzy msgid "failed to create a socket" msgstr "노드 할당 실패" #: src/xend_internal.c:158 #, fuzzy msgid "failed to connect to xend" msgstr "Xen Store에 연결 실패" #: src/xend_internal.c:205 src/xend_internal.c:208 msgid "failed to read from Xen Daemon" msgstr "Xen 데몬에서 읽기 실패" #: src/xend_internal.c:396 #, c-format msgid "xend_get: error from xen daemon: %s" msgstr "" #: src/xend_internal.c:446 src/xend_internal.c:449 src/xend_internal.c:457 #, c-format msgid "xend_post: error from xen daemon: %s" msgstr "" #: src/xend_internal.c:715 msgid "allocate new buffer" msgstr "새 버퍼 할당" #: src/xend_internal.c:848 #, fuzzy, c-format msgid "gethostbyname failed: %s" msgstr "작업 실패: %s" #: src/xend_internal.c:969 msgid "failed to urlencode the create S-Expr" msgstr "생성된 S-Expr를 urlencode하기 실패" #: src/xend_internal.c:1010 msgid "domain information incomplete, missing domid" msgstr "도메인 정보가 완료되지 않음, domid 부재" #: src/xend_internal.c:1016 msgid "domain information incorrect domid not numeric" msgstr "도메인 정보가 수치가 아닌 잘못된 domid임" #: src/xend_internal.c:1021 src/xend_internal.c:1068 msgid "domain information incomplete, missing uuid" msgstr "도메인 정보가 완료되지 않음, uuid 부재" #: src/xend_internal.c:1060 src/xend_internal.c:2162 src/xend_internal.c:2169 msgid "domain information incomplete, missing name" msgstr "도메인 정보가 완료되지 않음, 이름 부재" #: src/xend_internal.c:1149 #, fuzzy msgid "domain information incomplete, missing HVM loader" msgstr "도메인 정보가 완료되지 않음, 이름 부재" #: src/xend_internal.c:1203 msgid "domain information incomplete, missing kernel & bootloader" msgstr "도메인 정보가 완료되지 않음, 커널 & 부트로더 부재" #: src/xend_internal.c:1267 #, fuzzy msgid "Unknown char device type" msgstr "대상 장치 유형" #: src/xend_internal.c:1301 src/xend_internal.c:1341 src/xend_internal.c:1357 #: src/xend_internal.c:1496 src/xend_internal.c:1524 src/xend_internal.c:1540 msgid "malformed char device string" msgstr "" #: src/xend_internal.c:1424 msgid "no memory for char device config" msgstr "" #: src/xend_internal.c:1469 #, fuzzy, c-format msgid "unknown chr device type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/xend_internal.c:1631 msgid "domain information incomplete, vbd has no dev" msgstr "도메인 정보가 완료되지 않음, vbd는 dev가 없음" #: src/xend_internal.c:1642 msgid "domain information incomplete, vbd has no src" msgstr "도메인 정보가 완료되지 않음, vbd는 src가 없음" #: src/xend_internal.c:1651 msgid "cannot parse vbd filename, missing driver name" msgstr "vbd 파일명을 구문 분석할 수 없음, 드라이버명 부재" #: src/xend_internal.c:1666 msgid "cannot parse vbd filename, missing driver type" msgstr "vbd 파일명을 구문 분석할 수 없음, 드라이버 유형 부재" #: src/xend_internal.c:1806 #, c-format msgid "malformed mac address '%s'" msgstr "" #: src/xend_internal.c:1883 #, fuzzy, c-format msgid "unexpected sound model %s" msgstr "예상외의 dict 노드" #: src/xend_internal.c:2058 #, fuzzy, c-format msgid "unknown graphics type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/xend_internal.c:2149 msgid "domain information incomplete, missing id" msgstr "도메인 정보가 완료되지 않음, id 부재" #: src/xend_internal.c:2218 src/xend_internal.c:2228 src/xend_internal.c:2238 #, fuzzy, c-format msgid "unknown lifecycle type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/xend_internal.c:2559 #, fuzzy msgid "failed to parse topology information" msgstr "Xend 도메인 정보 분석 실패" #: src/xend_internal.c:2613 #, fuzzy msgid "topology syntax error" msgstr "설정 파일 구문 오류" #: src/xend_internal.c:2677 msgid "failed to parse Xend domain information" msgstr "Xend 도메인 정보 분석 실패" #: src/xend_internal.c:3158 msgid "xenDaemonDomainFetch failed to find this domain" msgstr "" #: src/xend_internal.c:3780 src/xend_internal.c:4259 src/xm_internal.c:1658 #, fuzzy msgid "failed to build sexpr" msgstr "S-Expr 나열하기 실패" #: src/xend_internal.c:3884 #, fuzzy msgid "unsupported device type" msgstr "대상 장치 유형" #: src/xend_internal.c:3989 msgid "xenDaemonGetAutostart failed to find this domain" msgstr "" #: src/xend_internal.c:4030 msgid "xenDaemonSetAutostart failed to find this domain" msgstr "" #: src/xend_internal.c:4038 #, fuzzy msgid "unexpected value from on_xend_start" msgstr "예상외의 값 노드" #: src/xend_internal.c:4049 #, fuzzy msgid "no memory" msgstr "노드 메모리" #: src/xend_internal.c:4055 #, fuzzy msgid "sexpr2string failed" msgstr "작업 실패" #: src/xend_internal.c:4060 #, fuzzy msgid "Failed to redefine sexpr" msgstr "%s 네트워크를 정의하지 않기 실패" #: src/xend_internal.c:4065 msgid "on_xend_start not present in sexpr" msgstr "" #: src/xend_internal.c:4096 #, fuzzy, c-format msgid "gethostname failed: %s" msgstr "작업 실패: %s" #: src/xend_internal.c:4102 #, fuzzy, c-format msgid "failed to strdup hostname: %s" msgstr "호스트명 보기 실패" #: src/xend_internal.c:4133 msgid "" "xenDaemonDomainMigrate: Xen does not support renaming domains during " "migration" msgstr "" #: src/xend_internal.c:4143 msgid "" "xenDaemonDomainMigrate: Xen does not support bandwidth limits during " "migration" msgstr "" #: src/xend_internal.c:4155 msgid "xenDaemonDomainMigrate: unsupported flag" msgstr "" #: src/xend_internal.c:4168 msgid "xenDaemonDomainMigrate: invalid URI" msgstr "" #: src/xend_internal.c:4173 msgid "xenDaemonDomainMigrate: only xenmigr:// migrations are supported by Xen" msgstr "" #: src/xend_internal.c:4180 msgid "xenDaemonDomainMigrate: a hostname must be specified in the URI" msgstr "" #: src/xend_internal.c:4187 src/xend_internal.c:4209 src/xend_internal.c:4217 #: src/xend_internal.c:4443 src/xend_internal.c:4450 src/xml.c:71 msgid "strdup failed" msgstr "" #: src/xend_internal.c:4200 msgid "xenDaemonDomainMigrate: invalid port number" msgstr "" #: src/xend_internal.c:4253 #, fuzzy msgid "failed to parse domain description" msgstr "Xend 도메인 정보 분석 실패" #: src/xend_internal.c:4269 #, c-format msgid "Failed to create inactive domain %s\n" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/xend_internal.c:4425 src/xend_internal.c:4501 src/xend_internal.c:4591 msgid "unsupported in xendConfigVersion < 4" msgstr "" #: src/xend_internal.c:4437 #, fuzzy msgid "node information incomplete, missing scheduler name" msgstr "도메인 정보가 완료되지 않음, 이름 부재" #: src/xend_internal.c:4455 src/xend_internal.c:4549 src/xend_internal.c:4661 #, fuzzy msgid "Unknown scheduler" msgstr "스케줄러" #: src/xend_internal.c:4514 src/xend_internal.c:4604 #, fuzzy msgid "Failed to get a scheduler name" msgstr "호스트명 보기 실패" #: src/xend_internal.c:4527 src/xend_internal.c:4640 #, fuzzy msgid "domain information incomplete, missing cpu_weight" msgstr "도메인 정보가 완료되지 않음, uuid 부재" #: src/xend_internal.c:4532 src/xend_internal.c:4649 #, fuzzy msgid "domain information incomplete, missing cpu_cap" msgstr "도메인 정보가 완료되지 않음, uuid 부재" #: src/xend_internal.c:4707 msgid "domainBlockPeek is not supported for dom0" msgstr "" #: src/xend_internal.c:4728 #, c-format msgid "%s: invalid path" msgstr "" #: src/xend_internal.c:4736 #, fuzzy, c-format msgid "failed to open for reading: %s: %s" msgstr "읽기 용 %s 열기 실패" #: src/xend_internal.c:4748 #, fuzzy, c-format msgid "failed to lseek or read from file: %s: %s" msgstr "%s 설정 파일 읽기 실패" #: src/xend_internal.c:4831 src/xend_internal.c:4877 #, fuzzy, c-format msgid "unexpected graphics type %d" msgstr "예상외의 mime 유형" #: src/xend_internal.c:4920 #, fuzzy msgid "unexpected chr device type" msgstr "예상외의 mime 유형" #: src/xend_internal.c:5094 src/xm_internal.c:1820 #, c-format msgid "unsupported network type %d" msgstr "" #: src/xend_internal.c:5264 src/xend_internal.c:5271 src/xend_internal.c:5278 #, fuzzy, c-format msgid "unexpected lifecycle value %d" msgstr "예상외의 값 노드" #: src/xend_internal.c:5295 #, fuzzy msgid "no HVM domain loader" msgstr "노드 도메인 목록" #: src/xend_internal.c:5497 msgid "hotplug of device type not supported" msgstr "" #: src/xm_internal.c:180 src/xm_internal.c:211 src/xm_internal.c:216 #: src/xm_internal.c:239 #, c-format msgid "config value %s was malformed" msgstr "" #: src/xm_internal.c:261 src/xm_internal.c:274 #, c-format msgid "config value %s was missing" msgstr "" #: src/xm_internal.c:267 #, c-format msgid "config value %s was not a string" msgstr "" #: src/xm_internal.c:409 #, c-format msgid "cannot stat %s: %s" msgstr "" #: src/xm_internal.c:466 msgid "xenXMConfigCacheRefresh: virHashAddEntry" msgstr "" #: src/xm_internal.c:783 #, fuzzy, c-format msgid "unexpected value %s for on_poweroff" msgstr "예상외의 값 노드" #: src/xm_internal.c:791 #, fuzzy, c-format msgid "unexpected value %s for on_reboot" msgstr "예상외의 값 노드" #: src/xm_internal.c:799 #, fuzzy, c-format msgid "unexpected value %s for on_crash" msgstr "예상외의 값 노드" #: src/xm_internal.c:1479 #, fuzzy msgid "read only connection" msgstr "읽기 전용 연결" #: src/xm_internal.c:1484 #, fuzzy msgid "not inactive domain" msgstr "비활성화 도메인 보기" #: src/xm_internal.c:1489 msgid "virHashLookup" msgstr "" #: src/xm_internal.c:1494 msgid "can't retrieve config file for domain" msgstr "" #: src/xm_internal.c:1992 src/xm_internal.c:2001 src/xm_internal.c:2010 #, fuzzy, c-format msgid "unexpected lifecycle action %d" msgstr "예상외의 dict 노드" #: src/xm_internal.c:2282 msgid "can't retrieve config filename for domain to overwrite" msgstr "" #: src/xm_internal.c:2288 msgid "can't retrieve config entry for domain to overwrite" msgstr "" #: src/xm_internal.c:2299 src/xm_internal.c:2306 #, fuzzy msgid "failed to remove old domain from config map" msgstr "%s에서 도메인을 복구하기 실패" #: src/xm_internal.c:2315 msgid "config file name is too long" msgstr "" #: src/xm_internal.c:2327 msgid "config" msgstr "" #: src/xm_internal.c:2333 #, fuzzy msgid "unable to get current time" msgstr "현재 메모리 크기를 확인할 수 없음" #: src/xm_internal.c:2342 src/xm_internal.c:2349 #, fuzzy msgid "unable to store config file handle" msgstr "%s 설정 파일 읽기 실패" #: src/xm_internal.c:2546 src/xm_internal.c:2644 #, fuzzy msgid "unknown device" msgstr "알려지지 않은 OS 유형" #: src/xm_internal.c:2703 #, fuzzy, c-format msgid "failed to check autostart link %s: %s" msgstr "%s %s 블럭 상태 보기 실패" #: src/xm_internal.c:2732 #, fuzzy, c-format msgid "failed to create link %s: %s" msgstr "%s에서 도메인 생성하기 실패" #: src/xm_internal.c:2740 #, fuzzy, c-format msgid "failed to remove link %s: %s" msgstr "'%s' 열기 실패: %s" #: src/xml.c:58 msgid "Invalid parameter to virXPathString()" msgstr "" #: src/xml.c:99 src/xml.c:141 src/xml.c:196 msgid "Invalid parameter to virXPathNumber()" msgstr "" #: src/xml.c:254 msgid "Invalid parameter to virXPathBoolean()" msgstr "" #: src/xml.c:292 msgid "Invalid parameter to virXPathNode()" msgstr "" #: src/xml.c:334 msgid "Invalid parameter to virXPathNodeSet()" msgstr "" #: src/xml.c:354 #, fuzzy, c-format msgid "allocate string array size %lu" msgstr "문자열 배치 할당" #: src/xmlrpc.c:53 #, fuzzy msgid "allocate value" msgstr "값 배열 할당" #: src/xmlrpc.c:65 msgid "copying node content" msgstr "노드 내용 복사 중" #: src/xmlrpc.c:162 msgid "allocate value array" msgstr "값 배열 할당" #: src/xmlrpc.c:185 #, fuzzy msgid "allocate dict" msgstr "새 문맥 할당" #: src/xmlrpc.c:196 msgid "unexpected dict node" msgstr "예상외의 dict 노드" #: src/xmlrpc.c:267 msgid "unexpected value node" msgstr "예상외의 값 노드" #: src/xmlrpc.c:427 msgid "send request" msgstr "요청을 보냄" #: src/xmlrpc.c:433 msgid "unexpected mime type" msgstr "예상외의 mime 유형" #: src/xmlrpc.c:439 msgid "allocate response" msgstr "응답 할당" #: src/xmlrpc.c:446 src/xmlrpc.c:508 msgid "read response" msgstr "응답 읽기" #: src/xmlrpc.c:478 msgid "allocate string array" msgstr "문자열 배치 할당" #: src/xmlrpc.c:601 msgid "parse server response failed" msgstr "서버 응답 분석 실패" #: src/xmlrpc.c:662 msgid "allocate new context" msgstr "새 문맥 할당" #: src/xs_internal.c:308 msgid "failed to connect to Xen Store" msgstr "Xen Store에 연결 실패" #: src/xs_internal.c:317 #, fuzzy msgid "failed to allocate activeDomainList" msgstr "활성화 도메인 보기 실패" #: src/xs_internal.c:326 #, fuzzy msgid "failed to allocate xsWatchList" msgstr "노드 할당 실패" #: src/xs_internal.c:335 msgid "adding watch @releaseDomain" msgstr "" #: src/xs_internal.c:344 msgid "adding watch @introduceDomain" msgstr "" #: src/xs_internal.c:1057 msgid "watch already tracked" msgstr "" #: src/xs_internal.c:1073 #, fuzzy msgid "reallocating list" msgstr "도메인 할당 중" #: src/xs_internal.c:1197 src/xs_internal.c:1281 #, fuzzy msgid "failed to allocate domids" msgstr "노드 할당 실패" #~ msgid "domain" #~ msgstr "도메인" #~ msgid "domain memory" #~ msgstr "도메인 메모리" #~ msgid "domain current memory" #~ msgstr "현재 도메인 메모리" #~ msgid "domain vcpus" #~ msgstr "도메인 vcpus" #~ msgid "domain reboot behaviour" #~ msgstr "도메인 재부팅 동작" #~ msgid "domain poweroff behaviour" #~ msgstr "도메인 종료 동작" #~ msgid "domain crash behaviour" #~ msgstr "도메인 충돌 동작" #~ msgid "load domain definition file" #~ msgstr "도메인 정의 파일 읽어오기" #~ msgid "network" #~ msgstr "네트워크" #~ msgid "network forward" #~ msgstr "네트워크 포워드" #~ msgid "ip address" #~ msgstr "ip 주소" #~ msgid "ip netmask" #~ msgstr "ip 넷마스크" #~ msgid "load network definition file" #~ msgstr "네트워크 정의 파일 읽어오기" #~ msgid "Failed to open '%s': read: %s" #~ msgstr "'%s' 열기 실패: 읽기: %s" #~ msgid "failed to exec %s\n" #~ msgstr "%s 실행 실패\n"