/* * virpci.c: helper APIs for managing host PCI devices * * Copyright (C) 2009-2015 Red Hat, Inc. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library. If not, see * . */ #include #include "virpci.h" #include "virnetdev.h" #include #include #include #include #include #include #include "virlog.h" #include "vircommand.h" #include "virerror.h" #include "virfile.h" #include "virkmod.h" #include "virstring.h" #include "viralloc.h" VIR_LOG_INIT("util.pci"); #define PCI_SYSFS "/sys/bus/pci/" #define PCI_ID_LEN 10 /* "XXXX XXXX" */ VIR_ENUM_IMPL(virPCIELinkSpeed, VIR_PCIE_LINK_SPEED_LAST, "", "2.5", "5", "8", "16", ); VIR_ENUM_IMPL(virPCIStubDriver, VIR_PCI_STUB_DRIVER_LAST, "none", "pciback", /* XEN */ "vfio-pci", /* VFIO */ ); VIR_ENUM_IMPL(virPCIHeader, VIR_PCI_HEADER_LAST, "endpoint", "pci-bridge", "cardbus-bridge", ); struct _virPCIDevice { virPCIDeviceAddress address; char *name; /* domain:bus:slot.function */ char id[PCI_ID_LEN]; /* product vendor */ char *path; /* The driver:domain which uses the device */ char *used_by_drvname; char *used_by_domname; /* The following 5 items are only valid after virPCIDeviceInit() * has been called for the virPCIDevice object. This is *not* done * in most cases (because it creates extra overhead, and parts of * it can fail if libvirtd is running unprivileged) */ unsigned int pcie_cap_pos; unsigned int pci_pm_cap_pos; bool has_flr; bool has_pm_reset; bool is_pcie; /**/ bool managed; virPCIStubDriver stubDriver; /* used by reattach function */ bool unbind_from_stub; bool remove_slot; bool reprobe; }; struct _virPCIDeviceList { virObjectLockable parent; size_t count; virPCIDevicePtr *devs; }; /* For virReportOOMError() and virReportSystemError() */ #define VIR_FROM_THIS VIR_FROM_NONE /* Specifications referenced in comments: * PCI30 - PCI Local Bus Specification 3.0 * PCIe20 - PCI Express Base Specification 2.0 * BR12 - PCI-to-PCI Bridge Architecture Specification 1.2 * PM12 - PCI Bus Power Management Interface Specification 1.2 * ECN_AF - Advanced Capabilities for Conventional PCI ECN */ /* Type 0 config space header length; PCI30 Section 6.1 Configuration Space Organization */ #define PCI_CONF_LEN 0x100 #define PCI_CONF_HEADER_LEN 0x40 /* PCI30 6.2.1 */ #define PCI_HEADER_TYPE 0x0e /* Header type */ #define PCI_HEADER_TYPE_BRIDGE 0x1 #define PCI_HEADER_TYPE_MASK 0x7f #define PCI_HEADER_TYPE_MULTI 0x80 /* PCI30 6.2.1 Device Identification */ #define PCI_CLASS_DEVICE 0x0a /* Device class */ /* Class Code for bridge; PCI30 D.7 Base Class 06h */ #define PCI_CLASS_BRIDGE_PCI 0x0604 /* PCI30 6.2.3 Device Status */ #define PCI_STATUS 0x06 /* 16 bits */ #define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ /* PCI30 6.7 Capabilities List */ #define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ #define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ /* PM12 3.2.1 Capability Identifier */ #define PCI_CAP_ID_PM 0x01 /* Power Management */ /* PCI30 H Capability IDs */ #define PCI_CAP_ID_EXP 0x10 /* PCI Express */ /* ECN_AF 6.x.1.1 Capability ID for AF */ #define PCI_CAP_ID_AF 0x13 /* Advanced Features */ /* PCIe20 7.8.3 Device Capabilities Register (Offset 04h) */ #define PCI_EXP_DEVCAP 0x4 /* Device capabilities */ #define PCI_EXP_DEVCAP_FLR (1<<28) /* Function Level Reset */ #define PCI_EXP_LNKCAP 0xc /* Link Capabilities */ #define PCI_EXP_LNKCAP_SPEED 0x0000f /* Maximum Link Speed */ #define PCI_EXP_LNKCAP_WIDTH 0x003f0 /* Maximum Link Width */ #define PCI_EXP_LNKSTA 0x12 /* Link Status */ #define PCI_EXP_LNKSTA_SPEED 0x000f /* Negotiated Link Speed */ #define PCI_EXP_LNKSTA_WIDTH 0x03f0 /* Negotiated Link Width */ /* Header type 1 BR12 3.2 PCI-to-PCI Bridge Configuration Space Header Format */ #define PCI_PRIMARY_BUS 0x18 /* BR12 3.2.5.2 Primary bus number */ #define PCI_SECONDARY_BUS 0x19 /* BR12 3.2.5.3 Secondary bus number */ #define PCI_SUBORDINATE_BUS 0x1a /* BR12 3.2.5.4 Highest bus number behind the bridge */ #define PCI_BRIDGE_CONTROL 0x3e /* BR12 3.2.5.18 Bridge Control Register */ #define PCI_BRIDGE_CTL_RESET 0x40 /* Secondary bus reset */ /* PM12 3.2.4 Power Management Control/Status (Offset = 4) */ #define PCI_PM_CTRL 4 /* PM control and status register */ #define PCI_PM_CTRL_STATE_MASK 0x3 /* Current power state (D0 to D3) */ #define PCI_PM_CTRL_STATE_D0 0x0 /* D0 state */ #define PCI_PM_CTRL_STATE_D3hot 0x3 /* D3 state */ #define PCI_PM_CTRL_NO_SOFT_RESET 0x8 /* No reset for D3hot->D0 */ /* ECN_AF 6.x.1 Advanced Features Capability Structure */ #define PCI_AF_CAP 0x3 /* Advanced features capabilities */ #define PCI_AF_CAP_FLR 0x2 /* Function Level Reset */ #define PCI_EXP_FLAGS 0x2 #define PCI_EXP_FLAGS_TYPE 0x00f0 #define PCI_EXP_TYPE_DOWNSTREAM 0x6 #define PCI_EXT_CAP_BASE 0x100 #define PCI_EXT_CAP_LIMIT 0x1000 #define PCI_EXT_CAP_ID_MASK 0x0000ffff #define PCI_EXT_CAP_OFFSET_SHIFT 20 #define PCI_EXT_CAP_OFFSET_MASK 0x00000ffc #define PCI_EXT_CAP_ID_ACS 0x000d #define PCI_EXT_ACS_CTRL 0x06 #define PCI_EXT_CAP_ACS_SV 0x01 #define PCI_EXT_CAP_ACS_RR 0x04 #define PCI_EXT_CAP_ACS_CR 0x08 #define PCI_EXT_CAP_ACS_UF 0x10 #define PCI_EXT_CAP_ACS_ENABLED (PCI_EXT_CAP_ACS_SV | \ PCI_EXT_CAP_ACS_RR | \ PCI_EXT_CAP_ACS_CR | \ PCI_EXT_CAP_ACS_UF) #define PCI_EXP_TYPE_ROOT_INT_EP 0x9 /* Root Complex Integrated Endpoint */ #define PCI_EXP_TYPE_ROOT_EC 0xa /* Root Complex Event Collector */ static virClassPtr virPCIDeviceListClass; static void virPCIDeviceListDispose(void *obj); static int virPCIOnceInit(void) { if (!VIR_CLASS_NEW(virPCIDeviceList, virClassForObjectLockable())) return -1; return 0; } VIR_ONCE_GLOBAL_INIT(virPCI); static char * virPCIDriverDir(const char *driver) { return g_strdup_printf(PCI_SYSFS "drivers/%s", driver); } static char * virPCIFile(const char *device, const char *file) { return g_strdup_printf(PCI_SYSFS "devices/%s/%s", device, file); } /* virPCIDeviceGetDriverPathAndName - put the path to the driver * directory of the driver in use for this device in @path and the * name of the driver in @name. Both could be NULL if it's not bound * to any driver. * * Return 0 for success, -1 for error. */ int virPCIDeviceGetDriverPathAndName(virPCIDevicePtr dev, char **path, char **name) { int ret = -1; g_autofree char *drvlink = NULL; *path = *name = NULL; /* drvlink = "/sys/bus/pci/dddd:bb:ss.ff/driver" */ drvlink = virPCIFile(dev->name, "driver"); if (!virFileExists(drvlink)) { ret = 0; goto cleanup; } if (virFileIsLink(drvlink) != 1) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Invalid device %s driver file %s is not a symlink"), dev->name, drvlink); goto cleanup; } if (virFileResolveLink(drvlink, path) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Unable to resolve device %s driver symlink %s"), dev->name, drvlink); goto cleanup; } /* path = "/sys/bus/pci/drivers/${drivername}" */ *name = g_path_get_basename(*path); /* name = "${drivername}" */ ret = 0; cleanup: if (ret < 0) { VIR_FREE(*path); VIR_FREE(*name); } return ret; } static int virPCIDeviceConfigOpenInternal(virPCIDevicePtr dev, bool readonly, bool fatal) { int fd; fd = open(dev->path, readonly ? O_RDONLY : O_RDWR); if (fd < 0) { if (fatal) { virReportSystemError(errno, _("Failed to open config space file '%s'"), dev->path); } else { VIR_WARN("Failed to open config space file '%s': %s", dev->path, g_strerror(errno)); } return -1; } VIR_DEBUG("%s %s: opened %s", dev->id, dev->name, dev->path); return fd; } static int virPCIDeviceConfigOpen(virPCIDevicePtr dev) { return virPCIDeviceConfigOpenInternal(dev, true, true); } static int virPCIDeviceConfigOpenTry(virPCIDevicePtr dev) { return virPCIDeviceConfigOpenInternal(dev, true, false); } static int virPCIDeviceConfigOpenWrite(virPCIDevicePtr dev) { return virPCIDeviceConfigOpenInternal(dev, false, true); } static void virPCIDeviceConfigClose(virPCIDevicePtr dev, int cfgfd) { if (VIR_CLOSE(cfgfd) < 0) { VIR_WARN("Failed to close config space file '%s': %s", dev->path, g_strerror(errno)); } } static int virPCIDeviceRead(virPCIDevicePtr dev, int cfgfd, unsigned int pos, uint8_t *buf, unsigned int buflen) { memset(buf, 0, buflen); errno = 0; if (lseek(cfgfd, pos, SEEK_SET) != pos || saferead(cfgfd, buf, buflen) != buflen) { VIR_DEBUG("Failed to read %u bytes at %u from '%s' : %s", buflen, pos, dev->path, g_strerror(errno)); return -1; } return 0; } /** * virPCIDeviceReadN: * @dev: virPCIDevice object (used only to log name of config file) * @cfgfd: open file descriptor for device config file in sysfs * @pos: byte offset in the file to read from * * read "N" (where "N" is "8", "16", or "32", and appears at the end * of the function name) bytes from a PCI device's already-opened * sysfs config file and return them as the return value from the * function. * * Returns the value at @pos in the file, or 0 if there was an * error. NB: since 0 could be a valid value, occurence of an error * must be determined by examining errno. errno is always reset to 0 * before the seek/read is attempted (see virPCIDeviceRead()), so if * errno != 0 on return from one of these functions, then either the * seek or the read operation failed for some reason. If errno == 0 * and the return value is 0, then the config file really does contain * the value 0 at @pos. */ static uint8_t virPCIDeviceRead8(virPCIDevicePtr dev, int cfgfd, unsigned int pos) { uint8_t buf; virPCIDeviceRead(dev, cfgfd, pos, &buf, sizeof(buf)); return buf; } static uint16_t virPCIDeviceRead16(virPCIDevicePtr dev, int cfgfd, unsigned int pos) { uint8_t buf[2]; virPCIDeviceRead(dev, cfgfd, pos, &buf[0], sizeof(buf)); return (buf[0] << 0) | (buf[1] << 8); } static uint32_t virPCIDeviceRead32(virPCIDevicePtr dev, int cfgfd, unsigned int pos) { uint8_t buf[4]; virPCIDeviceRead(dev, cfgfd, pos, &buf[0], sizeof(buf)); return (buf[0] << 0) | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24); } static int virPCIDeviceReadClass(virPCIDevicePtr dev, uint16_t *device_class) { g_autofree char *path = NULL; g_autofree char *id_str = NULL; unsigned int value; path = virPCIFile(dev->name, "class"); /* class string is '0xNNNNNN\n' ... i.e. 9 bytes */ if (virFileReadAll(path, 9, &id_str) < 0) return -1; id_str[8] = '\0'; if (virStrToLong_ui(id_str, NULL, 16, &value) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Unusual value in %s/devices/%s/class: %s"), PCI_SYSFS, dev->name, id_str); return -1; } *device_class = (value >> 8) & 0xFFFF; return 0; } static int virPCIDeviceWrite(virPCIDevicePtr dev, int cfgfd, unsigned int pos, uint8_t *buf, unsigned int buflen) { if (lseek(cfgfd, pos, SEEK_SET) != pos || safewrite(cfgfd, buf, buflen) != buflen) { VIR_WARN("Failed to write to '%s' : %s", dev->path, g_strerror(errno)); return -1; } return 0; } static void virPCIDeviceWrite16(virPCIDevicePtr dev, int cfgfd, unsigned int pos, uint16_t val) { uint8_t buf[2] = { (val >> 0), (val >> 8) }; virPCIDeviceWrite(dev, cfgfd, pos, &buf[0], sizeof(buf)); } static void virPCIDeviceWrite32(virPCIDevicePtr dev, int cfgfd, unsigned int pos, uint32_t val) { uint8_t buf[4] = { (val >> 0), (val >> 8), (val >> 16), (val >> 24) }; virPCIDeviceWrite(dev, cfgfd, pos, &buf[0], sizeof(buf)); } typedef int (*virPCIDeviceIterPredicate)(virPCIDevicePtr, virPCIDevicePtr, void *); /* Iterate over available PCI devices calling @predicate * to compare each one to @dev. * Return -1 on error since we don't want to assume it is * safe to reset if there is an error. */ static int virPCIDeviceIterDevices(virPCIDeviceIterPredicate predicate, virPCIDevicePtr dev, virPCIDevicePtr *matched, void *data) { g_autoptr(DIR) dir = NULL; struct dirent *entry; int ret = 0; int rc; *matched = NULL; VIR_DEBUG("%s %s: iterating over " PCI_SYSFS "devices", dev->id, dev->name); if (virDirOpen(&dir, PCI_SYSFS "devices") < 0) return -1; while ((ret = virDirRead(dir, &entry, PCI_SYSFS "devices")) > 0) { unsigned int domain, bus, slot, function; g_autoptr(virPCIDevice) check = NULL; char *tmp; /* expected format: ::. */ if (/* domain */ virStrToLong_ui(entry->d_name, &tmp, 16, &domain) < 0 || *tmp != ':' || /* bus */ virStrToLong_ui(tmp + 1, &tmp, 16, &bus) < 0 || *tmp != ':' || /* slot */ virStrToLong_ui(tmp + 1, &tmp, 16, &slot) < 0 || *tmp != '.' || /* function */ virStrToLong_ui(tmp + 1, NULL, 16, &function) < 0) { VIR_WARN("Unusual entry in " PCI_SYSFS "devices: %s", entry->d_name); continue; } check = virPCIDeviceNew(domain, bus, slot, function); if (!check) { ret = -1; break; } rc = predicate(dev, check, data); if (rc < 0) { /* the predicate returned an error, bail */ ret = -1; break; } else if (rc == 1) { VIR_DEBUG("%s %s: iter matched on %s", dev->id, dev->name, check->name); *matched = g_steal_pointer(&check); ret = 1; break; } } return ret; } /** * virPCIDeviceFindCapabilityOffset: * @dev: virPCIDevice object (used only to log name of config file) * @cfgfd: open file descriptor for device config file in sysfs * @capability: PCI_CAP_ID_* being requested * @offset: used to return the offset of @capability in the file * * Find the offset of @capability within the PCI config file @cfgfd of * the device @dev. if found, the offset is returned in @offset, * otherwise @offset is set to 0. * * Returns 0 on success, -1 on failure. */ static int virPCIDeviceFindCapabilityOffset(virPCIDevicePtr dev, int cfgfd, unsigned int capability, unsigned int *offset) { uint16_t status; uint8_t pos; *offset = 0; /* assume failure (*nothing* can be at offset 0) */ status = virPCIDeviceRead16(dev, cfgfd, PCI_STATUS); if (errno != 0 || !(status & PCI_STATUS_CAP_LIST)) goto error; pos = virPCIDeviceRead8(dev, cfgfd, PCI_CAPABILITY_LIST); if (errno != 0) goto error; /* Zero indicates last capability, capabilities can't * be in the config space header and 0xff is returned * by the kernel if we don't have access to this region * * Note: we're not handling loops or extended * capabilities here. */ while (pos >= PCI_CONF_HEADER_LEN && pos != 0xff) { uint8_t capid = virPCIDeviceRead8(dev, cfgfd, pos); if (errno != 0) goto error; if (capid == capability) { VIR_DEBUG("%s %s: found cap 0x%.2x at 0x%.2x", dev->id, dev->name, capability, pos); *offset = pos; return 0; } pos = virPCIDeviceRead8(dev, cfgfd, pos + 1); if (errno != 0) goto error; } error: VIR_DEBUG("%s %s: failed to find cap 0x%.2x (%s)", dev->id, dev->name, capability, g_strerror(errno)); /* reset errno in case the failure was due to insufficient * privileges to read the entire PCI config file */ errno = 0; return -1; } static unsigned int virPCIDeviceFindExtendedCapabilityOffset(virPCIDevicePtr dev, int cfgfd, unsigned int capability) { int ttl; unsigned int pos; uint32_t header; /* minimum 8 bytes per capability */ ttl = (PCI_EXT_CAP_LIMIT - PCI_EXT_CAP_BASE) / 8; pos = PCI_EXT_CAP_BASE; while (ttl > 0 && pos >= PCI_EXT_CAP_BASE) { header = virPCIDeviceRead32(dev, cfgfd, pos); if ((header & PCI_EXT_CAP_ID_MASK) == capability) return pos; pos = (header >> PCI_EXT_CAP_OFFSET_SHIFT) & PCI_EXT_CAP_OFFSET_MASK; ttl--; } return 0; } /* detects whether this device has FLR. Returns 0 if the device does * not have FLR, 1 if it does, and -1 on error */ static bool virPCIDeviceDetectFunctionLevelReset(virPCIDevicePtr dev, int cfgfd) { uint32_t caps; unsigned int pos; g_autofree char *path = NULL; int found; /* The PCIe Function Level Reset capability allows * individual device functions to be reset without * affecting any other functions on the device or * any other devices on the bus. This is only common * on SR-IOV NICs at the moment. */ if (dev->pcie_cap_pos) { caps = virPCIDeviceRead32(dev, cfgfd, dev->pcie_cap_pos + PCI_EXP_DEVCAP); if (caps & PCI_EXP_DEVCAP_FLR) { VIR_DEBUG("%s %s: detected PCIe FLR capability", dev->id, dev->name); return true; } } /* The PCI AF Function Level Reset capability is * the same thing, except for conventional PCI * devices. This is not common yet. */ if (virPCIDeviceFindCapabilityOffset(dev, cfgfd, PCI_CAP_ID_AF, &pos) < 0) goto error; if (pos) { caps = virPCIDeviceRead16(dev, cfgfd, pos + PCI_AF_CAP); if (caps & PCI_AF_CAP_FLR) { VIR_DEBUG("%s %s: detected PCI FLR capability", dev->id, dev->name); return true; } } /* there are some buggy devices that do support FLR, but forget to * advertise that fact in their capabilities. However, FLR is *required* * to be present for virtual functions (VFs), so if we see that this * device is a VF, we just assume FLR works */ path = g_strdup_printf(PCI_SYSFS "devices/%s/physfn", dev->name); found = virFileExists(path); if (found) { VIR_DEBUG("%s %s: buggy device didn't advertise FLR, but is a VF; forcing flr on", dev->id, dev->name); return true; } error: VIR_DEBUG("%s %s: no FLR capability found", dev->id, dev->name); return false; } /* Require the device has the PCI Power Management capability * and that a D3hot->D0 transition will results in a full * internal reset, not just a soft reset. */ static bool virPCIDeviceDetectPowerManagementReset(virPCIDevicePtr dev, int cfgfd) { if (dev->pci_pm_cap_pos) { uint32_t ctl; /* require the NO_SOFT_RESET bit is clear */ ctl = virPCIDeviceRead32(dev, cfgfd, dev->pci_pm_cap_pos + PCI_PM_CTRL); if (!(ctl & PCI_PM_CTRL_NO_SOFT_RESET)) { VIR_DEBUG("%s %s: detected PM reset capability", dev->id, dev->name); return true; } } VIR_DEBUG("%s %s: no PM reset capability found", dev->id, dev->name); return false; } /* Any active devices on the same domain/bus ? */ static int virPCIDeviceSharesBusWithActive(virPCIDevicePtr dev, virPCIDevicePtr check, void *data) { virPCIDeviceList *inactiveDevs = data; /* Different domain, different bus, or simply identical device */ if (dev->address.domain != check->address.domain || dev->address.bus != check->address.bus || (dev->address.slot == check->address.slot && dev->address.function == check->address.function)) return 0; /* same bus, but inactive, i.e. about to be assigned to guest */ if (inactiveDevs && virPCIDeviceListFind(inactiveDevs, check)) return 0; return 1; } static virPCIDevicePtr virPCIDeviceBusContainsActiveDevices(virPCIDevicePtr dev, virPCIDeviceList *inactiveDevs) { virPCIDevicePtr active = NULL; if (virPCIDeviceIterDevices(virPCIDeviceSharesBusWithActive, dev, &active, inactiveDevs) < 0) return NULL; return active; } /* Is @check the parent of @dev ? */ static int virPCIDeviceIsParent(virPCIDevicePtr dev, virPCIDevicePtr check, void *data) { uint16_t device_class; uint8_t header_type, secondary, subordinate; virPCIDevicePtr *best = data; int ret = 0; int fd; if (dev->address.domain != check->address.domain) return 0; if ((fd = virPCIDeviceConfigOpenTry(check)) < 0) return 0; /* Is it a bridge? */ ret = virPCIDeviceReadClass(check, &device_class); if (ret < 0 || device_class != PCI_CLASS_BRIDGE_PCI) goto cleanup; /* Is it a plane? */ header_type = virPCIDeviceRead8(check, fd, PCI_HEADER_TYPE); if ((header_type & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_BRIDGE) goto cleanup; secondary = virPCIDeviceRead8(check, fd, PCI_SECONDARY_BUS); subordinate = virPCIDeviceRead8(check, fd, PCI_SUBORDINATE_BUS); VIR_DEBUG("%s %s: found parent device %s", dev->id, dev->name, check->name); /* if the secondary bus exactly equals the device's bus, then we found * the direct parent. No further work is necessary */ if (dev->address.bus == secondary) { ret = 1; goto cleanup; } /* otherwise, SRIOV allows VFs to be on different buses than their PFs. * In this case, what we need to do is look for the "best" match; i.e. * the most restrictive match that still satisfies all of the conditions. */ if (dev->address.bus > secondary && dev->address.bus <= subordinate) { if (*best == NULL) { *best = virPCIDeviceNew(check->address.domain, check->address.bus, check->address.slot, check->address.function); if (*best == NULL) { ret = -1; goto cleanup; } } else { /* OK, we had already recorded a previous "best" match for the * parent. See if the current device is more restrictive than the * best, and if so, make it the new best */ int bestfd; uint8_t best_secondary; if ((bestfd = virPCIDeviceConfigOpenTry(*best)) < 0) goto cleanup; best_secondary = virPCIDeviceRead8(*best, bestfd, PCI_SECONDARY_BUS); virPCIDeviceConfigClose(*best, bestfd); if (secondary > best_secondary) { virPCIDeviceFree(*best); *best = virPCIDeviceNew(check->address.domain, check->address.bus, check->address.slot, check->address.function); if (*best == NULL) { ret = -1; goto cleanup; } } } } cleanup: virPCIDeviceConfigClose(check, fd); return ret; } static int virPCIDeviceGetParent(virPCIDevicePtr dev, virPCIDevicePtr *parent) { virPCIDevicePtr best = NULL; int ret; *parent = NULL; ret = virPCIDeviceIterDevices(virPCIDeviceIsParent, dev, parent, &best); if (ret == 1) virPCIDeviceFree(best); else if (ret == 0) *parent = best; return ret; } /* Secondary Bus Reset is our sledgehammer - it resets all * devices behind a bus. */ static int virPCIDeviceTrySecondaryBusReset(virPCIDevicePtr dev, int cfgfd, virPCIDeviceList *inactiveDevs) { g_autoptr(virPCIDevice) parent = NULL; g_autoptr(virPCIDevice) conflict = NULL; uint8_t config_space[PCI_CONF_LEN]; uint16_t ctl; int ret = -1; int parentfd; /* Refuse to do a secondary bus reset if there are other * devices/functions behind the bus are used by the host * or other guests. */ if ((conflict = virPCIDeviceBusContainsActiveDevices(dev, inactiveDevs))) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Active %s devices on bus with %s, not doing bus reset"), conflict->name, dev->name); return -1; } /* Find the parent bus */ if (virPCIDeviceGetParent(dev, &parent) < 0) return -1; if (!parent) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to find parent device for %s"), dev->name); return -1; } if ((parentfd = virPCIDeviceConfigOpenWrite(parent)) < 0) goto out; VIR_DEBUG("%s %s: doing a secondary bus reset", dev->id, dev->name); /* Save and restore the device's config space; we only do this * for the supplied device since we refuse to do a reset if there * are multiple devices/functions */ if (virPCIDeviceRead(dev, cfgfd, 0, config_space, PCI_CONF_LEN) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to read PCI config space for %s"), dev->name); goto out; } /* Read the control register, set the reset flag, wait 200ms, * unset the reset flag and wait 200ms. */ ctl = virPCIDeviceRead16(dev, parentfd, PCI_BRIDGE_CONTROL); virPCIDeviceWrite16(parent, parentfd, PCI_BRIDGE_CONTROL, ctl | PCI_BRIDGE_CTL_RESET); g_usleep(200 * 1000); /* sleep 200ms */ virPCIDeviceWrite16(parent, parentfd, PCI_BRIDGE_CONTROL, ctl); g_usleep(200 * 1000); /* sleep 200ms */ if (virPCIDeviceWrite(dev, cfgfd, 0, config_space, PCI_CONF_LEN) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to restore PCI config space for %s"), dev->name); goto out; } ret = 0; out: virPCIDeviceConfigClose(parent, parentfd); return ret; } /* Power management reset attempts to reset a device using a * D-state transition from D3hot to D0. Note, in detect_pm_reset() * above we require the device supports a full internal reset. */ static int virPCIDeviceTryPowerManagementReset(virPCIDevicePtr dev, int cfgfd) { uint8_t config_space[PCI_CONF_LEN]; uint32_t ctl; if (!dev->pci_pm_cap_pos) return -1; /* Save and restore the device's config space. */ if (virPCIDeviceRead(dev, cfgfd, 0, &config_space[0], PCI_CONF_LEN) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to read PCI config space for %s"), dev->name); return -1; } VIR_DEBUG("%s %s: doing a power management reset", dev->id, dev->name); ctl = virPCIDeviceRead32(dev, cfgfd, dev->pci_pm_cap_pos + PCI_PM_CTRL); ctl &= ~PCI_PM_CTRL_STATE_MASK; virPCIDeviceWrite32(dev, cfgfd, dev->pci_pm_cap_pos + PCI_PM_CTRL, ctl | PCI_PM_CTRL_STATE_D3hot); g_usleep(10 * 1000); /* sleep 10ms */ virPCIDeviceWrite32(dev, cfgfd, dev->pci_pm_cap_pos + PCI_PM_CTRL, ctl | PCI_PM_CTRL_STATE_D0); g_usleep(10 * 1000); /* sleep 10ms */ if (virPCIDeviceWrite(dev, cfgfd, 0, &config_space[0], PCI_CONF_LEN) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to restore PCI config space for %s"), dev->name); return -1; } return 0; } /** * virPCIDeviceInit: * @dev: virPCIDevice object needing its PCI capabilities info initialized * @cfgfd: open file descriptor for device config file in sysfs * * Initialize the PCI capabilities attributes of a virPCIDevice object * (i.e. pcie_cap_pos, pci_pm_cap_pos, has_flr, has_pm_reset, and * is_pcie). This is done by walking the info in the (already-opened) * device PCI config file in sysfs. This function can be called * regardless of whether a process has sufficient privilege to read * the entire file (unprivileged processes can only read the 1st 64 * bytes, while the Express Capabilities are all located beyond that * boundary). * * In the case that we are unable to read a capability * directly, we will attempt to infer its value by other means. In * particular, we can determine that a device is (almost surely) PCIe * by checking that the length of the config file is != 256 (since all * conventional PCI config files are 256 bytes), and we know that any * device that is an SR-IOV VF will have FLR available (since that is * required by the SR-IOV spec.) * * Always returns success (0) (for now) */ static int virPCIDeviceInit(virPCIDevicePtr dev, int cfgfd) { dev->is_pcie = false; if (virPCIDeviceFindCapabilityOffset(dev, cfgfd, PCI_CAP_ID_EXP, &dev->pcie_cap_pos) < 0) { /* an unprivileged process is unable to read *all* of a * device's PCI config (it can only read the first 64 * bytes, which isn't enough for see the Express * Capabilities data). If virPCIDeviceFindCapabilityOffset * returns failure (and not just a pcie_cap_pos == 0, * which is *success* at determining the device is *not* * PCIe) we make an educated guess based on the length of * the device's config file - if it is 256 bytes, then it * is definitely a legacy PCI device. If it's larger than * that, then it is *probably PCIe (although it could be * PCI-x, but those are extremely rare). If the config * file can't be found (in which case the "length" will be * -1), then we blindly assume the most likely outcome - * PCIe. */ off_t configLen = virFileLength(virPCIDeviceGetConfigPath(dev), -1); if (configLen != 256) dev->is_pcie = true; } else { dev->is_pcie = (dev->pcie_cap_pos != 0); } virPCIDeviceFindCapabilityOffset(dev, cfgfd, PCI_CAP_ID_PM, &dev->pci_pm_cap_pos); dev->has_flr = virPCIDeviceDetectFunctionLevelReset(dev, cfgfd); dev->has_pm_reset = virPCIDeviceDetectPowerManagementReset(dev, cfgfd); return 0; } int virPCIDeviceReset(virPCIDevicePtr dev, virPCIDeviceList *activeDevs, virPCIDeviceList *inactiveDevs) { g_autofree char *drvPath = NULL; g_autofree char *drvName = NULL; int ret = -1; int fd = -1; int hdrType = -1; if (virPCIGetHeaderType(dev, &hdrType) < 0) return -1; if (hdrType != VIR_PCI_HEADER_ENDPOINT) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Invalid attempt to reset PCI device %s. " "Only PCI endpoint devices can be reset"), dev->name); return -1; } if (activeDevs && virPCIDeviceListFind(activeDevs, dev)) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Not resetting active device %s"), dev->name); return -1; } /* If the device is currently bound to vfio-pci, ignore all * requests to reset it, since the vfio-pci driver will always * reset it whenever appropriate, so doing it ourselves would just * be redundant. */ if (virPCIDeviceGetDriverPathAndName(dev, &drvPath, &drvName) < 0) goto cleanup; if (virPCIStubDriverTypeFromString(drvName) == VIR_PCI_STUB_DRIVER_VFIO) { VIR_DEBUG("Device %s is bound to vfio-pci - skip reset", dev->name); ret = 0; goto cleanup; } VIR_DEBUG("Resetting device %s", dev->name); if ((fd = virPCIDeviceConfigOpenWrite(dev)) < 0) goto cleanup; if (virPCIDeviceInit(dev, fd) < 0) goto cleanup; /* KVM will perform FLR when starting and stopping * a guest, so there is no need for us to do it here. */ if (dev->has_flr) { ret = 0; goto cleanup; } /* If the device supports PCI power management reset, * that's the next best thing because it only resets * the function, not the whole device. */ if (dev->has_pm_reset) ret = virPCIDeviceTryPowerManagementReset(dev, fd); /* Bus reset is not an option with the root bus */ if (ret < 0 && dev->address.bus != 0) ret = virPCIDeviceTrySecondaryBusReset(dev, fd, inactiveDevs); if (ret < 0) { virErrorPtr err = virGetLastError(); virReportError(VIR_ERR_INTERNAL_ERROR, _("Unable to reset PCI device %s: %s"), dev->name, err ? err->message : _("no FLR, PM reset or bus reset available")); } cleanup: virPCIDeviceConfigClose(dev, fd); return ret; } static int virPCIProbeStubDriver(virPCIStubDriver driver) { const char *drvname = NULL; g_autofree char *drvpath = NULL; g_autofree char *errbuf = NULL; if (driver == VIR_PCI_STUB_DRIVER_NONE || !(drvname = virPCIStubDriverTypeToString(driver))) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("Attempting to use unknown stub driver")); return -1; } drvpath = virPCIDriverDir(drvname); /* driver previously loaded, return */ if (virFileExists(drvpath)) return 0; if ((errbuf = virKModLoad(drvname))) { VIR_WARN("failed to load driver %s: %s", drvname, errbuf); goto cleanup; } /* driver loaded after probing */ if (virFileExists(drvpath)) return 0; cleanup: /* If we know failure was because of admin config, let's report that; * otherwise, report a more generic failure message */ if (virKModIsProhibited(drvname)) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to load PCI stub module %s: " "administratively prohibited"), drvname); } else { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to load PCI stub module %s"), drvname); } return -1; } int virPCIDeviceUnbind(virPCIDevicePtr dev) { g_autofree char *path = NULL; g_autofree char *drvpath = NULL; g_autofree char *driver = NULL; if (virPCIDeviceGetDriverPathAndName(dev, &drvpath, &driver) < 0) return -1; if (!driver) /* The device is not bound to any driver */ return 0; path = virPCIFile(dev->name, "driver/unbind"); if (virFileExists(path)) { if (virFileWriteStr(path, dev->name, 0) < 0) { virReportSystemError(errno, _("Failed to unbind PCI device '%s' from %s"), dev->name, driver); return -1; } } return 0; } /** * virPCIDeviceRebind: * @dev: virPCIDevice object describing the device to rebind * * unbind a device from its driver, then immediately rebind it. * * Returns 0 on success, -1 on failure */ int virPCIDeviceRebind(virPCIDevicePtr dev) { if (virPCIDeviceUnbind(dev) < 0) return -1; if (virFileWriteStr(PCI_SYSFS "drivers_probe", dev->name, 0) < 0) { virReportSystemError(errno, _("Failed to trigger a probe for PCI device '%s'"), dev->name); return -1; } return 0; } /* * Bind a PCI device to a driver using driver_override sysfs interface. * E.g. * * echo driver-name > /sys/bus/pci/devices/0000:03:00.0/driver_override * echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind * echo 0000:03:00.0 > /sys/bus/pci/drivers_probe * * An empty driverName will cause the device to be bound to its * preferred driver. */ static int virPCIDeviceBindWithDriverOverride(virPCIDevicePtr dev, const char *driverName) { g_autofree char *path = NULL; path = virPCIFile(dev->name, "driver_override"); if (virFileWriteStr(path, driverName, 0) < 0) { virReportSystemError(errno, _("Failed to add driver '%s' to driver_override " " interface of PCI device '%s'"), driverName, dev->name); return -1; } if (virPCIDeviceRebind(dev) < 0) return -1; return 0; } static int virPCIDeviceUnbindFromStub(virPCIDevicePtr dev) { if (!dev->unbind_from_stub) { VIR_DEBUG("Unbind from stub skipped for PCI device %s", dev->name); return 0; } return virPCIDeviceBindWithDriverOverride(dev, "\n"); } static int virPCIDeviceBindToStub(virPCIDevicePtr dev) { const char *stubDriverName; g_autofree char *stubDriverPath = NULL; g_autofree char *driverLink = NULL; /* Check the device is configured to use one of the known stub drivers */ if (dev->stubDriver == VIR_PCI_STUB_DRIVER_NONE) { virReportError(VIR_ERR_INTERNAL_ERROR, _("No stub driver configured for PCI device %s"), dev->name); return -1; } else if (!(stubDriverName = virPCIStubDriverTypeToString(dev->stubDriver))) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Unknown stub driver configured for PCI device %s"), dev->name); return -1; } stubDriverPath = virPCIDriverDir(stubDriverName); driverLink = virPCIFile(dev->name, "driver"); if (virFileExists(driverLink)) { if (virFileLinkPointsTo(driverLink, stubDriverPath)) { /* The device is already bound to the correct driver */ VIR_DEBUG("Device %s is already bound to %s", dev->name, stubDriverName); return 0; } } if (virPCIDeviceBindWithDriverOverride(dev, stubDriverName) < 0) return -1; dev->unbind_from_stub = true; return 0; } /* virPCIDeviceDetach: * * Detach this device from the host driver, attach it to the stub * driver (previously set with virPCIDeviceSetStubDriver(), and add *a * copy* of the object to the inactiveDevs list (if provided). This * function will *never* consume dev, so the caller should free it. * * Returns 0 on success, -1 on failure (will fail if the device is * already in the activeDevs list, but will be a NOP if the device is * already bound to the stub). * * GENERAL NOTE: activeDevs should be a list of all PCI devices * currently in use by a domain. inactiveDevs is a list of all PCI * devices that libvirt has detached from the host driver + attached * to the stub driver, but hasn't yet assigned to a domain. Any device * that is still attached to its host driver should not be on either * list. */ int virPCIDeviceDetach(virPCIDevicePtr dev, virPCIDeviceList *activeDevs, virPCIDeviceList *inactiveDevs) { if (virPCIProbeStubDriver(dev->stubDriver) < 0) return -1; if (activeDevs && virPCIDeviceListFind(activeDevs, dev)) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Not detaching active device %s"), dev->name); return -1; } if (virPCIDeviceBindToStub(dev) < 0) return -1; /* Add *a copy of* the dev into list inactiveDevs, if * it's not already there. */ if (inactiveDevs && !virPCIDeviceListFind(inactiveDevs, dev)) { VIR_DEBUG("Adding PCI device %s to inactive list", dev->name); if (virPCIDeviceListAddCopy(inactiveDevs, dev) < 0) return -1; } return 0; } /* * Pre-condition: inactivePCIHostdevs & activePCIHostdevs * are locked */ int virPCIDeviceReattach(virPCIDevicePtr dev, virPCIDeviceListPtr activeDevs, virPCIDeviceListPtr inactiveDevs) { if (activeDevs && virPCIDeviceListFind(activeDevs, dev)) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Not reattaching active device %s"), dev->name); return -1; } if (virPCIDeviceUnbindFromStub(dev) < 0) return -1; /* Steal the dev from list inactiveDevs */ if (inactiveDevs) { VIR_DEBUG("Removing PCI device %s from inactive list", dev->name); virPCIDeviceListDel(inactiveDevs, dev); } return 0; } static char * virPCIDeviceReadID(virPCIDevicePtr dev, const char *id_name) { g_autofree char *path = NULL; g_autofree char *id_str = NULL; path = virPCIFile(dev->name, id_name); /* ID string is '0xNNNN\n' ... i.e. 7 bytes */ if (virFileReadAll(path, 7, &id_str) < 0) return NULL; /* Check for 0x suffix */ if (id_str[0] != '0' || id_str[1] != 'x') return NULL; /* Chop off the newline; we know the string is 7 bytes */ id_str[6] = '\0'; return g_steal_pointer(&id_str); } bool virPCIDeviceAddressIsValid(virPCIDeviceAddressPtr addr, bool report) { if (addr->bus > 0xFF) { if (report) virReportError(VIR_ERR_XML_ERROR, _("Invalid PCI address bus='0x%x', " "must be <= 0xFF"), addr->bus); return false; } if (addr->slot > 0x1F) { if (report) virReportError(VIR_ERR_XML_ERROR, _("Invalid PCI address slot='0x%x', " "must be <= 0x1F"), addr->slot); return false; } if (addr->function > 7) { if (report) virReportError(VIR_ERR_XML_ERROR, _("Invalid PCI address function=0x%x, " "must be <= 7"), addr->function); return false; } if (virPCIDeviceAddressIsEmpty(addr)) { if (report) virReportError(VIR_ERR_XML_ERROR, "%s", _("Invalid PCI address 0000:00:00, at least " "one of domain, bus, or slot must be > 0")); return false; } return true; } bool virPCIDeviceAddressIsEmpty(const virPCIDeviceAddress *addr) { return !(addr->domain || addr->bus || addr->slot); } bool virPCIDeviceAddressEqual(const virPCIDeviceAddress *addr1, const virPCIDeviceAddress *addr2) { if (addr1->domain == addr2->domain && addr1->bus == addr2->bus && addr1->slot == addr2->slot && addr1->function == addr2->function) { return true; } return false; } /** * virPCIDeviceAddressCopy: * @dst: where to store address * @src: source address to copy * * Creates a deep copy of given @src address and stores it into * @dst which has to be pre-allocated by caller. */ void virPCIDeviceAddressCopy(virPCIDeviceAddressPtr dst, const virPCIDeviceAddress *src) { memcpy(dst, src, sizeof(*src)); } char * virPCIDeviceAddressAsString(const virPCIDeviceAddress *addr) { char *str; str = g_strdup_printf(VIR_PCI_DEVICE_ADDRESS_FMT, addr->domain, addr->bus, addr->slot, addr->function); return str; } virPCIDevicePtr virPCIDeviceNew(unsigned int domain, unsigned int bus, unsigned int slot, unsigned int function) { g_autoptr(virPCIDevice) dev = NULL; g_autofree char *vendor = NULL; g_autofree char *product = NULL; dev = g_new0(virPCIDevice, 1); dev->address.domain = domain; dev->address.bus = bus; dev->address.slot = slot; dev->address.function = function; dev->name = g_strdup_printf(VIR_PCI_DEVICE_ADDRESS_FMT, domain, bus, slot, function); dev->path = g_strdup_printf(PCI_SYSFS "devices/%s/config", dev->name); if (!virFileExists(dev->path)) { virReportSystemError(errno, _("Device %s not found: could not access %s"), dev->name, dev->path); return NULL; } vendor = virPCIDeviceReadID(dev, "vendor"); product = virPCIDeviceReadID(dev, "device"); if (!vendor || !product) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to read product/vendor ID for %s"), dev->name); return NULL; } /* strings contain '0x' prefix */ if (g_snprintf(dev->id, sizeof(dev->id), "%s %s", &vendor[2], &product[2]) >= sizeof(dev->id)) { virReportError(VIR_ERR_INTERNAL_ERROR, _("dev->id buffer overflow: %s %s"), &vendor[2], &product[2]); return NULL; } VIR_DEBUG("%s %s: initialized", dev->id, dev->name); return g_steal_pointer(&dev); } virPCIDevicePtr virPCIDeviceCopy(virPCIDevicePtr dev) { virPCIDevicePtr copy; copy = g_new0(virPCIDevice, 1); /* shallow copy to take care of most attributes */ *copy = *dev; copy->path = NULL; copy->used_by_drvname = copy->used_by_domname = NULL; copy->name = g_strdup(dev->name); copy->path = g_strdup(dev->path); copy->used_by_drvname = g_strdup(dev->used_by_drvname); copy->used_by_domname = g_strdup(dev->used_by_domname); return copy; } void virPCIDeviceFree(virPCIDevicePtr dev) { if (!dev) return; VIR_DEBUG("%s %s: freeing", dev->id, dev->name); VIR_FREE(dev->name); VIR_FREE(dev->path); VIR_FREE(dev->used_by_drvname); VIR_FREE(dev->used_by_domname); VIR_FREE(dev); } /** * virPCIDeviceGetAddress: * @dev: device to get address from * * Take a PCI device on input and return its PCI address. The * returned object is owned by the device and must not be freed. * * Returns: a pointer to the address, which can never be NULL. */ virPCIDeviceAddressPtr virPCIDeviceGetAddress(virPCIDevicePtr dev) { return &(dev->address); } const char * virPCIDeviceGetName(virPCIDevicePtr dev) { return dev->name; } /** * virPCIDeviceGetConfigPath: * * Returns a pointer to a string containing the path of @dev's PCI * config file. */ const char * virPCIDeviceGetConfigPath(virPCIDevicePtr dev) { return dev->path; } void virPCIDeviceSetManaged(virPCIDevicePtr dev, bool managed) { dev->managed = managed; } bool virPCIDeviceGetManaged(virPCIDevicePtr dev) { return dev->managed; } void virPCIDeviceSetStubDriver(virPCIDevicePtr dev, virPCIStubDriver driver) { dev->stubDriver = driver; } virPCIStubDriver virPCIDeviceGetStubDriver(virPCIDevicePtr dev) { return dev->stubDriver; } bool virPCIDeviceGetUnbindFromStub(virPCIDevicePtr dev) { return dev->unbind_from_stub; } void virPCIDeviceSetUnbindFromStub(virPCIDevicePtr dev, bool unbind) { dev->unbind_from_stub = unbind; } bool virPCIDeviceGetRemoveSlot(virPCIDevicePtr dev) { return dev->remove_slot; } void virPCIDeviceSetRemoveSlot(virPCIDevicePtr dev, bool remove_slot) { dev->remove_slot = remove_slot; } bool virPCIDeviceGetReprobe(virPCIDevicePtr dev) { return dev->reprobe; } void virPCIDeviceSetReprobe(virPCIDevicePtr dev, bool reprobe) { dev->reprobe = reprobe; } int virPCIDeviceSetUsedBy(virPCIDevicePtr dev, const char *drv_name, const char *dom_name) { VIR_FREE(dev->used_by_drvname); VIR_FREE(dev->used_by_domname); dev->used_by_drvname = g_strdup(drv_name); dev->used_by_domname = g_strdup(dom_name); return 0; } void virPCIDeviceGetUsedBy(virPCIDevicePtr dev, const char **drv_name, const char **dom_name) { *drv_name = dev->used_by_drvname; *dom_name = dev->used_by_domname; } virPCIDeviceListPtr virPCIDeviceListNew(void) { virPCIDeviceListPtr list; if (virPCIInitialize() < 0) return NULL; if (!(list = virObjectLockableNew(virPCIDeviceListClass))) return NULL; return list; } static void virPCIDeviceListDispose(void *obj) { virPCIDeviceListPtr list = obj; size_t i; for (i = 0; i < list->count; i++) { virPCIDeviceFree(list->devs[i]); list->devs[i] = NULL; } list->count = 0; VIR_FREE(list->devs); } int virPCIDeviceListAdd(virPCIDeviceListPtr list, virPCIDevicePtr dev) { if (virPCIDeviceListFind(list, dev)) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Device %s is already in use"), dev->name); return -1; } return VIR_APPEND_ELEMENT(list->devs, list->count, dev); } /* virPCIDeviceListAddCopy - add a *copy* of the device to this list */ int virPCIDeviceListAddCopy(virPCIDeviceListPtr list, virPCIDevicePtr dev) { g_autoptr(virPCIDevice) copy = virPCIDeviceCopy(dev); if (!copy) return -1; if (virPCIDeviceListAdd(list, copy) < 0) return -1; copy = NULL; return 0; } virPCIDevicePtr virPCIDeviceListGet(virPCIDeviceListPtr list, int idx) { if (idx >= list->count) return NULL; if (idx < 0) return NULL; return list->devs[idx]; } size_t virPCIDeviceListCount(virPCIDeviceListPtr list) { return list->count; } virPCIDevicePtr virPCIDeviceListStealIndex(virPCIDeviceListPtr list, int idx) { virPCIDevicePtr ret; if (idx < 0 || idx >= list->count) return NULL; ret = list->devs[idx]; VIR_DELETE_ELEMENT(list->devs, idx, list->count); return ret; } virPCIDevicePtr virPCIDeviceListSteal(virPCIDeviceListPtr list, virPCIDevicePtr dev) { return virPCIDeviceListStealIndex(list, virPCIDeviceListFindIndex(list, dev)); } void virPCIDeviceListDel(virPCIDeviceListPtr list, virPCIDevicePtr dev) { virPCIDeviceFree(virPCIDeviceListSteal(list, dev)); } int virPCIDeviceListFindIndex(virPCIDeviceListPtr list, virPCIDevicePtr dev) { size_t i; for (i = 0; i < list->count; i++) { virPCIDevicePtr other = list->devs[i]; if (other->address.domain == dev->address.domain && other->address.bus == dev->address.bus && other->address.slot == dev->address.slot && other->address.function == dev->address.function) return i; } return -1; } virPCIDevicePtr virPCIDeviceListFindByIDs(virPCIDeviceListPtr list, unsigned int domain, unsigned int bus, unsigned int slot, unsigned int function) { size_t i; for (i = 0; i < list->count; i++) { virPCIDevicePtr other = list->devs[i]; if (other->address.domain == domain && other->address.bus == bus && other->address.slot == slot && other->address.function == function) return list->devs[i]; } return NULL; } virPCIDevicePtr virPCIDeviceListFind(virPCIDeviceListPtr list, virPCIDevicePtr dev) { int idx; if ((idx = virPCIDeviceListFindIndex(list, dev)) >= 0) return list->devs[idx]; else return NULL; } int virPCIDeviceFileIterate(virPCIDevicePtr dev, virPCIDeviceFileActor actor, void *opaque) { g_autofree char *pcidir = NULL; g_autoptr(DIR) dir = NULL; struct dirent *ent; int direrr; pcidir = g_strdup_printf("/sys/bus/pci/devices/" VIR_PCI_DEVICE_ADDRESS_FMT, dev->address.domain, dev->address.bus, dev->address.slot, dev->address.function); if (virDirOpen(&dir, pcidir) < 0) return -1; while ((direrr = virDirRead(dir, &ent, pcidir)) > 0) { g_autofree char *file = NULL; /* Device assignment requires: * $PCIDIR/config, $PCIDIR/resource, $PCIDIR/resourceNNN, * $PCIDIR/rom, $PCIDIR/reset, $PCIDIR/vendor, $PCIDIR/device */ if (STREQ(ent->d_name, "config") || STRPREFIX(ent->d_name, "resource") || STREQ(ent->d_name, "rom") || STREQ(ent->d_name, "vendor") || STREQ(ent->d_name, "device") || STREQ(ent->d_name, "reset")) { file = g_strdup_printf("%s/%s", pcidir, ent->d_name); if ((actor)(dev, file, opaque) < 0) return -1; } } if (direrr < 0) return -1; return 0; } /* virPCIDeviceAddressIOMMUGroupIterate: * Call @actor for all devices in the same iommu_group as orig * (including orig itself) Even if there is no iommu_group for the * device, call @actor once for orig. */ int virPCIDeviceAddressIOMMUGroupIterate(virPCIDeviceAddressPtr orig, virPCIDeviceAddressActor actor, void *opaque) { g_autofree char *groupPath = NULL; g_autoptr(DIR) groupDir = NULL; struct dirent *ent; int direrr; groupPath = g_strdup_printf(PCI_SYSFS "devices/" VIR_PCI_DEVICE_ADDRESS_FMT "/iommu_group/devices", orig->domain, orig->bus, orig->slot, orig->function); if (virDirOpenQuiet(&groupDir, groupPath) < 0) { /* just process the original device, nothing more */ return (actor)(orig, opaque); } while ((direrr = virDirRead(groupDir, &ent, groupPath)) > 0) { virPCIDeviceAddress newDev; if (virPCIDeviceAddressParse(ent->d_name, &newDev) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Found invalid device link '%s' in '%s'"), ent->d_name, groupPath); return -1; } if ((actor)(&newDev, opaque) < 0) return -1; } if (direrr < 0) return -1; return 0; } static int virPCIDeviceGetIOMMUGroupAddOne(virPCIDeviceAddressPtr newDevAddr, void *opaque) { virPCIDeviceListPtr groupList = opaque; g_autoptr(virPCIDevice) newDev = NULL; if (!(newDev = virPCIDeviceNew(newDevAddr->domain, newDevAddr->bus, newDevAddr->slot, newDevAddr->function))) return -1; if (virPCIDeviceListAdd(groupList, newDev) < 0) return -1; newDev = NULL; /* it's now on the list */ return 0; } /* * virPCIDeviceGetIOMMUGroupList - return a virPCIDeviceList containing * all of the devices in the same iommu_group as @dev. * * Return the new list, or NULL on failure */ virPCIDeviceListPtr virPCIDeviceGetIOMMUGroupList(virPCIDevicePtr dev) { virPCIDeviceListPtr groupList = virPCIDeviceListNew(); if (!groupList) goto error; if (virPCIDeviceAddressIOMMUGroupIterate(&(dev->address), virPCIDeviceGetIOMMUGroupAddOne, groupList) < 0) goto error; return groupList; error: virObjectUnref(groupList); return NULL; } typedef struct { virPCIDeviceAddressPtr **iommuGroupDevices; size_t *nIommuGroupDevices; } virPCIDeviceAddressList; typedef virPCIDeviceAddressList *virPCIDeviceAddressListPtr; static int virPCIGetIOMMUGroupAddressesAddOne(virPCIDeviceAddressPtr newDevAddr, void *opaque) { virPCIDeviceAddressListPtr addrList = opaque; g_autofree virPCIDeviceAddressPtr copyAddr = NULL; /* make a copy to insert onto the list */ copyAddr = g_new0(virPCIDeviceAddress, 1); *copyAddr = *newDevAddr; if (VIR_APPEND_ELEMENT(*addrList->iommuGroupDevices, *addrList->nIommuGroupDevices, copyAddr) < 0) return -1; return 0; } /* * virPCIDeviceAddressGetIOMMUGroupAddresses - return a * virPCIDeviceList containing all of the devices in the same * iommu_group as @dev. * * Return the new list, or NULL on failure */ int virPCIDeviceAddressGetIOMMUGroupAddresses(virPCIDeviceAddressPtr devAddr, virPCIDeviceAddressPtr **iommuGroupDevices, size_t *nIommuGroupDevices) { virPCIDeviceAddressList addrList = { iommuGroupDevices, nIommuGroupDevices }; if (virPCIDeviceAddressIOMMUGroupIterate(devAddr, virPCIGetIOMMUGroupAddressesAddOne, &addrList) < 0) return -1; return 0; } /* virPCIDeviceAddressGetIOMMUGroupNum - return the group number of * this PCI device's iommu_group, or -2 if there is no iommu_group for * the device (or -1 if there was any other error) */ int virPCIDeviceAddressGetIOMMUGroupNum(virPCIDeviceAddressPtr addr) { g_autofree char *devName = NULL; g_autofree char *devPath = NULL; g_autofree char *groupPath = NULL; g_autofree char *groupNumStr = NULL; unsigned int groupNum; devName = g_strdup_printf(VIR_PCI_DEVICE_ADDRESS_FMT, addr->domain, addr->bus, addr->slot, addr->function); devPath = virPCIFile(devName, "iommu_group"); if (virFileIsLink(devPath) != 1) return -2; if (virFileResolveLink(devPath, &groupPath) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Unable to resolve device %s iommu_group symlink %s"), devName, devPath); return -1; } groupNumStr = g_path_get_basename(groupPath); if (virStrToLong_ui(groupNumStr, NULL, 10, &groupNum) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("device %s iommu_group symlink %s has " "invalid group number %s"), devName, groupPath, groupNumStr); return -1; } return groupNum; } char * virPCIDeviceAddressGetIOMMUGroupDev(const virPCIDeviceAddress *devAddr) { g_autoptr(virPCIDevice) pci = NULL; if (!(pci = virPCIDeviceNew(devAddr->domain, devAddr->bus, devAddr->slot, devAddr->function))) return NULL; return virPCIDeviceGetIOMMUGroupDev(pci); } /* virPCIDeviceGetIOMMUGroupDev - return the name of the device used * to control this PCI device's group (e.g. "/dev/vfio/15") */ char * virPCIDeviceGetIOMMUGroupDev(virPCIDevicePtr dev) { g_autofree char *devPath = NULL; g_autofree char *groupPath = NULL; g_autofree char *groupFile = NULL; devPath = virPCIFile(dev->name, "iommu_group"); if (virFileIsLink(devPath) != 1) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Invalid device %s iommu_group file %s is not a symlink"), dev->name, devPath); return NULL; } if (virFileResolveLink(devPath, &groupPath) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Unable to resolve device %s iommu_group symlink %s"), dev->name, devPath); return NULL; } groupFile = g_path_get_basename(groupPath); return g_strdup_printf("/dev/vfio/%s", groupFile); } static int virPCIDeviceDownstreamLacksACS(virPCIDevicePtr dev) { uint16_t flags; uint16_t ctrl; unsigned int pos; int fd; int ret = 0; uint16_t device_class; if ((fd = virPCIDeviceConfigOpen(dev)) < 0) return -1; if (virPCIDeviceInit(dev, fd) < 0) { ret = -1; goto cleanup; } if (virPCIDeviceReadClass(dev, &device_class) < 0) goto cleanup; pos = dev->pcie_cap_pos; if (!pos || device_class != PCI_CLASS_BRIDGE_PCI) goto cleanup; flags = virPCIDeviceRead16(dev, fd, pos + PCI_EXP_FLAGS); if (((flags & PCI_EXP_FLAGS_TYPE) >> 4) != PCI_EXP_TYPE_DOWNSTREAM) goto cleanup; pos = virPCIDeviceFindExtendedCapabilityOffset(dev, fd, PCI_EXT_CAP_ID_ACS); if (!pos) { VIR_DEBUG("%s %s: downstream port lacks ACS", dev->id, dev->name); ret = 1; goto cleanup; } ctrl = virPCIDeviceRead16(dev, fd, pos + PCI_EXT_ACS_CTRL); if ((ctrl & PCI_EXT_CAP_ACS_ENABLED) != PCI_EXT_CAP_ACS_ENABLED) { VIR_DEBUG("%s %s: downstream port has ACS disabled", dev->id, dev->name); ret = 1; goto cleanup; } cleanup: virPCIDeviceConfigClose(dev, fd); return ret; } static int virPCIDeviceIsBehindSwitchLackingACS(virPCIDevicePtr dev) { g_autoptr(virPCIDevice) parent = NULL; if (virPCIDeviceGetParent(dev, &parent) < 0) return -1; if (!parent) { /* if we have no parent, and this is the root bus, ACS doesn't come * into play since devices on the root bus can't P2P without going * through the root IOMMU. */ if (dev->address.bus == 0) { return 0; } else { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to find parent device for %s"), dev->name); return -1; } } /* XXX we should rather fail when we can't find device's parent and * stop the loop when we get to root instead of just stopping when no * parent can be found */ do { g_autoptr(virPCIDevice) tmp = NULL; int acs; int ret; acs = virPCIDeviceDownstreamLacksACS(parent); if (acs) { if (acs < 0) return -1; else return 1; } tmp = parent; ret = virPCIDeviceGetParent(parent, &parent); if (ret < 0) return -1; } while (parent); return 0; } int virPCIDeviceIsAssignable(virPCIDevicePtr dev, int strict_acs_check) { int ret; /* XXX This could be a great place to actually check that a non-managed * device isn't in use, e.g. by checking that device is either un-bound * or bound to a stub driver. */ ret = virPCIDeviceIsBehindSwitchLackingACS(dev); if (ret < 0) return 0; if (ret) { if (!strict_acs_check) { VIR_DEBUG("%s %s: strict ACS check disabled; device assignment allowed", dev->id, dev->name); } else { virReportError(VIR_ERR_INTERNAL_ERROR, _("Device %s is behind a switch lacking ACS and " "cannot be assigned"), dev->name); return 0; } } return 1; } static int logStrToLong_ui(char const *s, char **end_ptr, int base, unsigned int *result) { int ret = 0; ret = virStrToLong_ui(s, end_ptr, base, result); if (ret != 0) VIR_ERROR(_("Failed to convert '%s' to unsigned int"), s); return ret; } int virPCIDeviceAddressParse(char *address, virPCIDeviceAddressPtr bdf) { char *p = NULL; if ((address == NULL) || (logStrToLong_ui(address, &p, 16, &bdf->domain) == -1)) { return -1; } if ((p == NULL) || (logStrToLong_ui(p+1, &p, 16, &bdf->bus) == -1)) { return -1; } if ((p == NULL) || (logStrToLong_ui(p+1, &p, 16, &bdf->slot) == -1)) { return -1; } if ((p == NULL) || (logStrToLong_ui(p+1, &p, 16, &bdf->function) == -1)) { return -1; } return 0; } bool virZPCIDeviceAddressIsIncomplete(const virZPCIDeviceAddress *addr) { return !addr->uid.isSet || !addr->fid.isSet; } bool virZPCIDeviceAddressIsPresent(const virZPCIDeviceAddress *addr) { return addr->uid.isSet || addr->fid.isSet; } #ifdef __linux__ virPCIDeviceAddressPtr virPCIGetDeviceAddressFromSysfsLink(const char *device_link) { g_autofree virPCIDeviceAddressPtr bdf = NULL; g_autofree char *config_address = NULL; g_autofree char *device_path = NULL; if (!virFileExists(device_link)) { VIR_DEBUG("'%s' does not exist", device_link); return NULL; } device_path = virFileCanonicalizePath(device_link); if (device_path == NULL) { virReportSystemError(errno, _("Failed to resolve device link '%s'"), device_link); return NULL; } config_address = g_path_get_basename(device_path); bdf = g_new0(virPCIDeviceAddress, 1); if (virPCIDeviceAddressParse(config_address, bdf) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to parse PCI config address '%s'"), config_address); return NULL; } return g_steal_pointer(&bdf); } /** * virPCIGetPhysicalFunction: * @vf_sysfs_path: sysfs path for the virtual function * @pf: where to store the physical function's address * * Given @vf_sysfs_path, this function will store the pointer * to a newly-allocated virPCIDeviceAddress in @pf. * * @pf might be NULL if @vf_sysfs_path does not point to a * virtual function. If it's not NULL, then it should be * freed by the caller when no longer needed. * * Returns: >=0 on success, <0 on failure */ int virPCIGetPhysicalFunction(const char *vf_sysfs_path, virPCIDeviceAddressPtr *pf) { g_autofree char *device_link = NULL; *pf = NULL; if (virBuildPath(&device_link, vf_sysfs_path, "physfn") == -1) { virReportOOMError(); return -1; } if ((*pf = virPCIGetDeviceAddressFromSysfsLink(device_link))) { VIR_DEBUG("PF for VF device '%s': " VIR_PCI_DEVICE_ADDRESS_FMT, vf_sysfs_path, (*pf)->domain, (*pf)->bus, (*pf)->slot, (*pf)->function); } return 0; } /* * Returns virtual functions of a physical function */ int virPCIGetVirtualFunctions(const char *sysfs_path, virPCIDeviceAddressPtr **virtual_functions, size_t *num_virtual_functions, unsigned int *max_virtual_functions) { size_t i; g_autofree char *totalvfs_file = NULL; g_autofree char *totalvfs_str = NULL; g_autofree virPCIDeviceAddressPtr config_addr = NULL; *virtual_functions = NULL; *num_virtual_functions = 0; *max_virtual_functions = 0; totalvfs_file = g_strdup_printf("%s/sriov_totalvfs", sysfs_path); if (virFileExists(totalvfs_file)) { char *end = NULL; /* so that terminating \n doesn't create error */ if (virFileReadAll(totalvfs_file, 16, &totalvfs_str) < 0) goto error; if (virStrToLong_ui(totalvfs_str, &end, 10, max_virtual_functions) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Unrecognized value in %s: %s"), totalvfs_file, totalvfs_str); goto error; } } do { g_autofree char *device_link = NULL; /* look for virtfn%d links until one isn't found */ device_link = g_strdup_printf("%s/virtfn%zu", sysfs_path, *num_virtual_functions); if (!virFileExists(device_link)) break; if (!(config_addr = virPCIGetDeviceAddressFromSysfsLink(device_link))) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to get SRIOV function from device link '%s'"), device_link); goto error; } if (VIR_APPEND_ELEMENT(*virtual_functions, *num_virtual_functions, config_addr) < 0) goto error; } while (1); VIR_DEBUG("Found %zu virtual functions for %s", *num_virtual_functions, sysfs_path); return 0; error: for (i = 0; i < *num_virtual_functions; i++) VIR_FREE((*virtual_functions)[i]); VIR_FREE(*virtual_functions); *num_virtual_functions = 0; return -1; } /* * Returns 1 if vf device is a virtual function, 0 if not, -1 on error */ int virPCIIsVirtualFunction(const char *vf_sysfs_device_link) { g_autofree char *vf_sysfs_physfn_link = NULL; vf_sysfs_physfn_link = g_strdup_printf("%s/physfn", vf_sysfs_device_link); return virFileExists(vf_sysfs_physfn_link); } /* * Returns the sriov virtual function index of vf given its pf */ int virPCIGetVirtualFunctionIndex(const char *pf_sysfs_device_link, const char *vf_sysfs_device_link, int *vf_index) { int ret = -1; size_t i; size_t num_virt_fns = 0; unsigned int max_virt_fns = 0; g_autofree virPCIDeviceAddressPtr vf_bdf = NULL; virPCIDeviceAddressPtr *virt_fns = NULL; if (!(vf_bdf = virPCIGetDeviceAddressFromSysfsLink(vf_sysfs_device_link))) return ret; if (virPCIGetVirtualFunctions(pf_sysfs_device_link, &virt_fns, &num_virt_fns, &max_virt_fns) < 0) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Error getting physical function's '%s' " "virtual_functions"), pf_sysfs_device_link); goto out; } for (i = 0; i < num_virt_fns; i++) { if (virPCIDeviceAddressEqual(vf_bdf, virt_fns[i])) { *vf_index = i; ret = 0; break; } } out: /* free virtual functions */ for (i = 0; i < num_virt_fns; i++) VIR_FREE(virt_fns[i]); VIR_FREE(virt_fns); return ret; } /* * Returns a path to the PCI sysfs file given the BDF of the PCI function */ int virPCIDeviceAddressGetSysfsFile(virPCIDeviceAddressPtr addr, char **pci_sysfs_device_link) { *pci_sysfs_device_link = g_strdup_printf(PCI_SYSFS "devices/" VIR_PCI_DEVICE_ADDRESS_FMT, addr->domain, addr->bus, addr->slot, addr->function); return 0; } /** * virPCIGetNetName: * @device_link_sysfs_path: sysfs path to the PCI device * @idx: used to choose which netdev when there are several * (ignored if physPortID is set) * @physPortID: match this string in the netdev's phys_port_id * (or NULL to ignore and use idx instead) * @netname: used to return the name of the netdev * (set to NULL (but returns success) if there is no netdev) * * Returns 0 on success, -1 on error (error has been logged) */ int virPCIGetNetName(const char *device_link_sysfs_path, size_t idx, char *physPortID, char **netname) { g_autofree char *pcidev_sysfs_net_path = NULL; g_autofree char *firstEntryName = NULL; g_autoptr(DIR) dir = NULL; struct dirent *entry = NULL; size_t i = 0; *netname = NULL; if (virBuildPath(&pcidev_sysfs_net_path, device_link_sysfs_path, "net") == -1) { virReportOOMError(); return -1; } if (virDirOpenQuiet(&dir, pcidev_sysfs_net_path) < 0) { /* this *isn't* an error - caller needs to check for netname == NULL */ return 0; } while (virDirRead(dir, &entry, pcidev_sysfs_net_path) > 0) { /* if the caller sent a physPortID, compare it to the * physportID of this netdev. If not, look for entry[idx]. */ if (physPortID) { g_autofree char *thisPhysPortID = NULL; if (virNetDevGetPhysPortID(entry->d_name, &thisPhysPortID) < 0) return -1; /* if this one doesn't match, keep looking */ if (STRNEQ_NULLABLE(physPortID, thisPhysPortID)) { /* save the first entry we find to use as a failsafe * in case we don't match the phys_port_id. This is * needed because some NIC drivers (e.g. i40e) * implement phys_port_id for PFs, but not for VFs */ if (!firstEntryName) firstEntryName = g_strdup(entry->d_name); continue; } } else { if (i++ < idx) continue; } *netname = g_strdup(entry->d_name); return 0; } if (!physPortID) return 0; if (firstEntryName) { /* we didn't match the provided phys_port_id, but this * is probably because phys_port_id isn't implemented * for this NIC driver, so just return the first * (probably only) netname we found. */ *netname = g_steal_pointer(&firstEntryName); return 0; } virReportError(VIR_ERR_INTERNAL_ERROR, _("Could not find network device with " "phys_port_id '%s' under PCI device at %s"), physPortID, device_link_sysfs_path); return -1; } int virPCIGetVirtualFunctionInfo(const char *vf_sysfs_device_path, int pfNetDevIdx, char **pfname, int *vf_index) { g_autofree virPCIDeviceAddressPtr pf_config_address = NULL; g_autofree char *pf_sysfs_device_path = NULL; g_autofree char *vfname = NULL; g_autofree char *vfPhysPortID = NULL; if (virPCIGetPhysicalFunction(vf_sysfs_device_path, &pf_config_address) < 0) return -1; if (!pf_config_address) return -1; if (virPCIDeviceAddressGetSysfsFile(pf_config_address, &pf_sysfs_device_path) < 0) { return -1; } if (virPCIGetVirtualFunctionIndex(pf_sysfs_device_path, vf_sysfs_device_path, vf_index) < 0) { return -1; } /* If the caller hasn't asked for a specific pfNetDevIdx, and VF * is bound to a netdev, learn that netdev's phys_port_id (if * available). This can be used to disambiguate when the PF has * multiple netdevs. If the VF isn't bound to a netdev, then we * return netdev[pfNetDevIdx] on the PF, which may or may not be * correct. */ if (pfNetDevIdx == -1) { if (virPCIGetNetName(vf_sysfs_device_path, 0, NULL, &vfname) < 0) return -1; if (vfname) { if (virNetDevGetPhysPortID(vfname, &vfPhysPortID) < 0) return -1; } pfNetDevIdx = 0; } if (virPCIGetNetName(pf_sysfs_device_path, pfNetDevIdx, vfPhysPortID, pfname) < 0) { return -1; } if (!*pfname) { /* this shouldn't be possible. A VF can't exist unless its * PF device is bound to a network driver */ virReportError(VIR_ERR_INTERNAL_ERROR, _("The PF device for VF %s has no network device name"), vf_sysfs_device_path); return -1; } return 0; } #else static const char *unsupported = N_("not supported on non-linux platforms"); virPCIDeviceAddressPtr virPCIGetDeviceAddressFromSysfsLink(const char *device_link G_GNUC_UNUSED) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported)); return NULL; } int virPCIGetPhysicalFunction(const char *vf_sysfs_path G_GNUC_UNUSED, virPCIDeviceAddressPtr *pf G_GNUC_UNUSED) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported)); return -1; } int virPCIGetVirtualFunctions(const char *sysfs_path G_GNUC_UNUSED, virPCIDeviceAddressPtr **virtual_functions G_GNUC_UNUSED, size_t *num_virtual_functions G_GNUC_UNUSED, unsigned int *max_virtual_functions G_GNUC_UNUSED) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported)); return -1; } int virPCIIsVirtualFunction(const char *vf_sysfs_device_link G_GNUC_UNUSED) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported)); return -1; } int virPCIGetVirtualFunctionIndex(const char *pf_sysfs_device_link G_GNUC_UNUSED, const char *vf_sysfs_device_link G_GNUC_UNUSED, int *vf_index G_GNUC_UNUSED) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported)); return -1; } int virPCIDeviceAddressGetSysfsFile(virPCIDeviceAddressPtr dev G_GNUC_UNUSED, char **pci_sysfs_device_link G_GNUC_UNUSED) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported)); return -1; } int virPCIGetNetName(const char *device_link_sysfs_path G_GNUC_UNUSED, size_t idx G_GNUC_UNUSED, char *physPortID G_GNUC_UNUSED, char **netname G_GNUC_UNUSED) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported)); return -1; } int virPCIGetVirtualFunctionInfo(const char *vf_sysfs_device_path G_GNUC_UNUSED, int pfNetDevIdx G_GNUC_UNUSED, char **pfname G_GNUC_UNUSED, int *vf_index G_GNUC_UNUSED) { virReportError(VIR_ERR_INTERNAL_ERROR, "%s", _(unsupported)); return -1; } #endif /* __linux__ */ int virPCIDeviceIsPCIExpress(virPCIDevicePtr dev) { int fd; int ret = -1; if ((fd = virPCIDeviceConfigOpen(dev)) < 0) return ret; if (virPCIDeviceInit(dev, fd) < 0) goto cleanup; ret = dev->is_pcie; cleanup: virPCIDeviceConfigClose(dev, fd); return ret; } int virPCIDeviceHasPCIExpressLink(virPCIDevicePtr dev) { int fd; int ret = -1; uint16_t cap, type; if ((fd = virPCIDeviceConfigOpen(dev)) < 0) return ret; if (virPCIDeviceInit(dev, fd) < 0) goto cleanup; cap = virPCIDeviceRead16(dev, fd, dev->pcie_cap_pos + PCI_CAP_FLAGS); type = (cap & PCI_EXP_FLAGS_TYPE) >> 4; ret = type != PCI_EXP_TYPE_ROOT_INT_EP && type != PCI_EXP_TYPE_ROOT_EC; cleanup: virPCIDeviceConfigClose(dev, fd); return ret; } int virPCIDeviceGetLinkCapSta(virPCIDevicePtr dev, int *cap_port, unsigned int *cap_speed, unsigned int *cap_width, unsigned int *sta_speed, unsigned int *sta_width) { uint32_t t; int fd; int ret = -1; if ((fd = virPCIDeviceConfigOpen(dev)) < 0) return ret; if (virPCIDeviceInit(dev, fd) < 0) goto cleanup; if (!dev->pcie_cap_pos) { virReportError(VIR_ERR_INTERNAL_ERROR, _("pci device %s is not a PCI-Express device"), dev->name); goto cleanup; } t = virPCIDeviceRead32(dev, fd, dev->pcie_cap_pos + PCI_EXP_LNKCAP); *cap_port = t >> 24; *cap_speed = t & PCI_EXP_LNKCAP_SPEED; *cap_width = (t & PCI_EXP_LNKCAP_WIDTH) >> 4; t = virPCIDeviceRead16(dev, fd, dev->pcie_cap_pos + PCI_EXP_LNKSTA); *sta_speed = t & PCI_EXP_LNKSTA_SPEED; *sta_width = (t & PCI_EXP_LNKSTA_WIDTH) >> 4; ret = 0; cleanup: virPCIDeviceConfigClose(dev, fd); return ret; } int virPCIGetHeaderType(virPCIDevicePtr dev, int *hdrType) { int fd; uint8_t type; *hdrType = -1; if ((fd = virPCIDeviceConfigOpen(dev)) < 0) return -1; type = virPCIDeviceRead8(dev, fd, PCI_HEADER_TYPE); virPCIDeviceConfigClose(dev, fd); type &= PCI_HEADER_TYPE_MASK; if (type >= VIR_PCI_HEADER_LAST) { virReportError(VIR_ERR_INTERNAL_ERROR, _("Unknown PCI header type '%d' for device '%s'"), type, dev->name); return -1; } *hdrType = type; return 0; } void virPCIEDeviceInfoFree(virPCIEDeviceInfoPtr dev) { if (!dev) return; VIR_FREE(dev->link_cap); VIR_FREE(dev->link_sta); VIR_FREE(dev); } void virPCIDeviceAddressFree(virPCIDeviceAddressPtr address) { VIR_FREE(address); }