# -*- rpm-spec -*- # This spec file assumes you are building on a Fedora or RHEL version # that's still supported by the vendor. It may work on other distros # or versions, but no effort will be made to ensure that going forward. %define min_rhel 8 %define min_fedora 33 %define arches_qemu_kvm %{ix86} x86_64 %{power64} %{arm} aarch64 s390x %if 0%{?rhel} %if 0%{?rhel} > 8 %define arches_qemu_kvm x86_64 aarch64 s390x %else %define arches_qemu_kvm x86_64 %{power64} aarch64 s390x %endif %endif %define arches_64bit x86_64 %{power64} aarch64 s390x riscv64 %define arches_x86 %{ix86} x86_64 %define arches_systemtap_64bit %{arches_64bit} %define arches_dmidecode %{arches_x86} %define arches_xen %{arches_x86} aarch64 %if 0%{?fedora} >= 36 %define arches_xen x86_64 aarch64 %endif %define arches_vbox %{arches_x86} %define arches_ceph %{arches_64bit} %define arches_zfs %{arches_x86} %{power64} %{arm} %define arches_numactl %{arches_x86} %{power64} aarch64 s390x %define arches_numad %{arches_x86} %{power64} aarch64 # The hypervisor drivers that run in libvirtd %define with_qemu 0%{!?_without_qemu:1} %define with_lxc 0%{!?_without_lxc:1} %define with_libxl 0%{!?_without_libxl:1} %define with_vbox 0%{!?_without_vbox:1} %ifarch %{arches_qemu_kvm} %define with_qemu_kvm %{with_qemu} %else %define with_qemu_kvm 0 %endif %define with_qemu_tcg %{with_qemu} # RHEL disables TCG on all architectures %if 0%{?rhel} %define with_qemu_tcg 0 %endif %if ! %{with_qemu_tcg} && ! %{with_qemu_kvm} %define with_qemu 0 %endif # Then the hypervisor drivers that run outside libvirtd, in libvirt.so %define with_openvz 0%{!?_without_openvz:1} %define with_vmware 0%{!?_without_vmware:1} %define with_esx 0%{!?_without_esx:1} %define with_hyperv 0%{!?_without_hyperv:1} # Then the secondary host drivers, which run inside libvirtd %define with_storage_rbd 0%{!?_without_storage_rbd:1} %define with_storage_gluster 0%{!?_without_storage_gluster:1} %if 0%{?rhel} # Glusterfs has been dropped in RHEL-9, and before that # was only enabled on arches where KVM exists %if 0%{?rhel} > 8 %define with_storage_gluster 0 %else %ifnarch %{arches_qemu_kvm} %define with_storage_gluster 0 %endif %endif %endif # Fedora has zfs-fuse %if 0%{?fedora} %define with_storage_zfs 0%{!?_without_storage_zfs:1} %else %define with_storage_zfs 0 %endif %define with_storage_iscsi_direct 0%{!?_without_storage_iscsi_direct:1} # libiscsi has been dropped in RHEL-9 %if 0%{?rhel} > 8 %define with_storage_iscsi_direct 0 %endif # Other optional features %define with_numactl 0%{!?_without_numactl:1} # A few optional bits off by default, we enable later %define with_fuse 0 %define with_sanlock 0 %define with_numad 0 %define with_firewalld_zone 0 %define with_netcf 0 %define with_libssh2 0 %define with_wireshark 0 %define with_libssh 0 %define with_dmidecode 0 # Finally set the OS / architecture specific special cases # Architecture-dependent features %ifnarch %{arches_xen} %define with_libxl 0 %endif %ifnarch %{arches_vbox} %define with_vbox 0 %endif %ifnarch %{arches_numactl} %define with_numactl 0 %endif %ifnarch %{arches_zfs} %define with_storage_zfs 0 %endif %ifnarch %{arches_ceph} %define with_storage_rbd 0 %endif # RHEL doesn't ship many hypervisor drivers %if 0%{?rhel} %define with_openvz 0 %define with_vbox 0 %define with_vmware 0 %define with_libxl 0 %define with_hyperv 0 %define with_vz 0 %define with_lxc 0 %endif %define with_firewalld_zone 0%{!?_without_firewalld_zone:1} %if (0%{?fedora} && 0%{?fedora} < 34) || (0%{?rhel} && 0%{?rhel} < 9) %define with_netcf 0%{!?_without_netcf:1} %endif # fuse is used to provide virtualized /proc for LXC %if %{with_lxc} %define with_fuse 0%{!?_without_fuse:1} %endif # Enable sanlock library for lock management with QEMU # Sanlock is available only on arches where kvm is available for RHEL %if 0%{?fedora} %define with_sanlock 0%{!?_without_sanlock:1} %endif %if 0%{?rhel} %ifarch %{arches_qemu_kvm} %define with_sanlock 0%{!?_without_sanlock:1} %endif %endif # Enable libssh2 transport for new enough distros %if 0%{?fedora} %define with_libssh2 0%{!?_without_libssh2:1} %endif # Enable wireshark plugins for all distros %define with_wireshark 0%{!?_without_wireshark:1} %define wireshark_plugindir %(pkg-config --variable plugindir wireshark)/epan # Enable libssh transport for all distros %define with_libssh 0%{!?_without_libssh:1} %if %{with_qemu} || %{with_lxc} # numad is used to manage the CPU and memory placement dynamically, # it's not available on many non-x86 architectures. %ifarch %{arches_numad} %define with_numad 0%{!?_without_numad:1} %endif %endif %ifarch %{arches_dmidecode} %define with_dmidecode 0%{!?_without_dmidecode:1} %endif %define with_modular_daemons 0 %if 0%{?fedora} >= 35 || 0%{?rhel} >= 9 %define with_modular_daemons 1 %endif # Force QEMU to run as non-root %define qemu_user qemu %define qemu_group qemu # Locations for QEMU data %define qemu_moddir %{_libdir}/qemu %define qemu_datadir %{_datadir}/qemu %define with_mingw 0 %if 0%{?fedora} %define with_mingw 0%{!?_without_mingw:1} %endif # RHEL releases provide stable tool chains and so it is safe to turn # compiler warning into errors without being worried about frequent # changes in reported warnings %if 0%{?rhel} %define enable_werror -Dwerror=true %else %define enable_werror -Dwerror=false -Dgit_werror=disabled %endif %define tls_priority "@LIBVIRT,SYSTEM" # libvirt 8.1.0 stops distributing any sysconfig files. # If the user has customized their sysconfig file, # the RPM upgrade path will rename it to .rpmsave # because the file is no longer managed by RPM. # To prevent a regression we rename it back after the # transaction to preserve the user's modifications %define libvirt_sysconfig_pre() \ for sc in %{?*} ; do \ test -f "%{_sysconfdir}/sysconfig/${sc}.rpmsave" || continue ; \ mv -v "%{_sysconfdir}/sysconfig/${sc}.rpmsave" "%{_sysconfdir}/sysconfig/${sc}.rpmsave.old" ; \ done \ %{nil} %define libvirt_sysconfig_posttrans() \ for sc in %{?*} ; do \ test -f "%{_sysconfdir}/sysconfig/${sc}.rpmsave" || continue ; \ mv -v "%{_sysconfdir}/sysconfig/${sc}.rpmsave" "%{_sysconfdir}/sysconfig/${sc}" ; \ done \ %{nil} Summary: Library providing a simple virtualization API Name: libvirt Version: @VERSION@ Release: 1%{?dist} License: LGPLv2+ URL: https://libvirt.org/ %if %(echo %{version} | grep -q "\.0$"; echo $?) == 1 %define mainturl stable_updates/ %endif Source: https://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-config-network = %{version}-%{release} Requires: libvirt-daemon-config-nwfilter = %{version}-%{release} %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif %if %{with_lxc} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} %endif %if %{with_qemu} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} %endif # We had UML driver, but we've removed it. Obsoletes: libvirt-daemon-driver-uml <= 5.0.0 Obsoletes: libvirt-daemon-uml <= 5.0.0 %if %{with_vbox} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} %endif Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-client = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # All build-time requirements. Run-time requirements are # listed against each sub-RPM BuildRequires: python3-docutils BuildRequires: gcc BuildRequires: meson >= 0.56.0 BuildRequires: ninja-build BuildRequires: git BuildRequires: perl-interpreter BuildRequires: python3 %if %{with_libxl} BuildRequires: xen-devel %endif BuildRequires: glib2-devel >= 2.56 BuildRequires: libxml2-devel BuildRequires: libxslt BuildRequires: readline-devel BuildRequires: bash-completion >= 2.0 BuildRequires: gettext BuildRequires: libtasn1-devel BuildRequires: gnutls-devel BuildRequires: libattr-devel # For pool-build probing for existing pools BuildRequires: libblkid-devel >= 2.17 # for augparse, optionally used in testing BuildRequires: augeas BuildRequires: systemd-devel >= 185 BuildRequires: systemd-rpm-macros BuildRequires: libpciaccess-devel >= 0.10.9 BuildRequires: yajl-devel %if %{with_sanlock} BuildRequires: sanlock-devel >= 2.4 %endif BuildRequires: libpcap-devel >= 1.5.0 BuildRequires: libnl3-devel BuildRequires: libselinux-devel BuildRequires: iptables BuildRequires: ebtables BuildRequires: module-init-tools BuildRequires: cyrus-sasl-devel BuildRequires: polkit >= 0.112 # For mount/umount in FS driver BuildRequires: util-linux %if %{with_qemu} # For managing ACLs BuildRequires: libacl-devel # From QEMU RPMs BuildRequires: /usr/bin/qemu-img %endif # For LVM drivers BuildRequires: lvm2 # For pool type=iscsi BuildRequires: iscsi-initiator-utils %if %{with_storage_iscsi_direct} # For pool type=iscsi-direct BuildRequires: libiscsi-devel %endif # For disk driver BuildRequires: parted-devel # For Multipath support BuildRequires: device-mapper-devel %if %{with_storage_rbd} BuildRequires: librados-devel BuildRequires: librbd-devel %endif %if %{with_storage_gluster} BuildRequires: glusterfs-api-devel >= 3.4.1 BuildRequires: glusterfs-devel >= 3.4.1 %endif %if %{with_numactl} # For QEMU/LXC numa info BuildRequires: numactl-devel %endif BuildRequires: libcap-ng-devel >= 0.5.0 %if %{with_fuse} BuildRequires: fuse-devel >= 2.8.6 %endif %if %{with_libssh2} BuildRequires: libssh2-devel >= 1.3.0 %endif %if %{with_netcf} BuildRequires: netcf-devel >= 0.2.2 %endif %if %{with_esx} BuildRequires: libcurl-devel %endif %if %{with_hyperv} BuildRequires: libwsman-devel >= 2.6.3 %endif BuildRequires: audit-libs-devel # we need /usr/sbin/dtrace BuildRequires: systemtap-sdt-devel # For mount/umount in FS driver BuildRequires: util-linux # For showmount in FS driver (netfs discovery) BuildRequires: nfs-utils # Fedora build root suckage BuildRequires: gawk # For storage wiping with different algorithms BuildRequires: scrub %if %{with_numad} BuildRequires: numad %endif %if %{with_wireshark} BuildRequires: wireshark-devel %endif %if %{with_libssh} BuildRequires: libssh-devel >= 0.8.1 %endif BuildRequires: rpcgen BuildRequires: libtirpc-devel # Needed for the firewalld_reload macro %if %{with_firewalld_zone} BuildRequires: firewalld-filesystem %endif %if %{with_mingw} BuildRequires: mingw32-filesystem BuildRequires: mingw32-gcc BuildRequires: mingw32-binutils BuildRequires: mingw32-glib2 >= 2.48 BuildRequires: mingw32-libgpg-error BuildRequires: mingw32-libgcrypt BuildRequires: mingw32-gnutls BuildRequires: mingw32-gettext BuildRequires: mingw32-libxml2 BuildRequires: mingw32-portablexdr BuildRequires: mingw32-dlfcn BuildRequires: mingw32-libssh2 BuildRequires: mingw32-curl BuildRequires: mingw64-filesystem BuildRequires: mingw64-gcc BuildRequires: mingw64-binutils BuildRequires: mingw64-glib2 >= 2.48 BuildRequires: mingw64-libgpg-error BuildRequires: mingw64-libgcrypt BuildRequires: mingw64-gnutls BuildRequires: mingw64-gettext BuildRequires: mingw64-libxml2 BuildRequires: mingw64-portablexdr BuildRequires: mingw64-dlfcn BuildRequires: mingw64-libssh2 BuildRequires: mingw64-curl %endif %description Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes). The main package includes the libvirtd server exporting the virtualization support. %package docs Summary: API reference and website documentation %description docs Includes the API reference for the libvirt C library, and a complete copy of the libvirt.org website documentation. %package daemon Summary: Server side daemon and supporting files for libvirt library # All runtime requirements for the libvirt package (runtime requrements # for subpackages are listed later in those subpackages) # The client side, i.e. shared libs are in a subpackage Requires: %{name}-libs = %{version}-%{release} # netcat is needed on the server side so that clients that have # libvirt < 6.9.0 can connect, but newer versions will prefer # virt-ssh-helper. Making this a Recommends means that it gets # installed by default, but can still be removed if compatibility # with old clients is not required Recommends: /usr/bin/nc # for modprobe of pci devices Requires: module-init-tools # for /sbin/ip Requires: iproute # for /sbin/tc Requires: iproute-tc Requires: polkit >= 0.112 %if %{with_dmidecode} # For virConnectGetSysinfo Requires: dmidecode %endif # For service management Requires(post): /usr/bin/systemctl %if %{with_numad} Requires: numad %endif # libvirtd depends on 'messagebus' service Requires: dbus # For uid creation during pre Requires(pre): shadow-utils # Needed by /usr/libexec/libvirt-guests.sh script. %if 0%{?fedora} >= 37 Requires: gettext-runtime %else Requires: gettext %endif # Ensure smooth upgrades Obsoletes: libvirt-admin < 7.3.0 Provides: libvirt-admin = %{version}-%{release} Obsoletes: libvirt-bash-completion < 7.3.0 %description daemon Server side daemon required to manage the virtualization capabilities of recent versions of Linux. Requires a hypervisor specific sub-RPM for specific drivers. %package daemon-config-network Summary: Default configuration files for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} %description daemon-config-network Default configuration files for setting up NAT based networking %package daemon-config-nwfilter Summary: Network filter configuration files for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} %description daemon-config-nwfilter Network filter configuration files for cleaning guest traffic %package daemon-driver-network Summary: Network driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: dnsmasq >= 2.41 Requires: iptables %description daemon-driver-network The network driver plugin for the libvirtd daemon, providing an implementation of the virtual network APIs using the Linux bridge capabilities. %package daemon-driver-nwfilter Summary: Nwfilter driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: iptables Requires: ebtables %description daemon-driver-nwfilter The nwfilter driver plugin for the libvirtd daemon, providing an implementation of the firewall APIs using the ebtables, iptables and ip6tables capabilities %package daemon-driver-nodedev Summary: Nodedev driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # needed for device enumeration Requires: systemd >= 185 # For managing persistent mediated devices Requires: mdevctl %description daemon-driver-nodedev The nodedev driver plugin for the libvirtd daemon, providing an implementation of the node device APIs using the udev capabilities. %package daemon-driver-interface Summary: Interface driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %if %{with_netcf} Requires: netcf-libs >= 0.2.2 %endif %description daemon-driver-interface The interface driver plugin for the libvirtd daemon, providing an implementation of the host network interface APIs. %package daemon-driver-secret Summary: Secret driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-secret The secret driver plugin for the libvirtd daemon, providing an implementation of the secret key APIs. %package daemon-driver-storage-core Summary: Storage driver plugin including base backends for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: nfs-utils # For mkfs Requires: util-linux %if %{with_qemu} # From QEMU RPMs Requires: /usr/bin/qemu-img %endif %if !%{with_storage_rbd} Obsoletes: libvirt-daemon-driver-storage-rbd < 5.2.0 %endif Obsoletes: libvirt-daemon-driver-storage-sheepdog < 8.8.0 %description daemon-driver-storage-core The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using files, local disks, LVM, SCSI, iSCSI, and multipath storage. %package daemon-driver-storage-logical Summary: Storage driver plugin for lvm volumes Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: lvm2 %description daemon-driver-storage-logical The storage driver backend adding implementation of the storage APIs for block volumes using lvm. %package daemon-driver-storage-disk Summary: Storage driver plugin for disk Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: parted Requires: device-mapper %description daemon-driver-storage-disk The storage driver backend adding implementation of the storage APIs for block volumes using the host disks. %package daemon-driver-storage-scsi Summary: Storage driver plugin for local scsi devices Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-scsi The storage driver backend adding implementation of the storage APIs for scsi host devices. %package daemon-driver-storage-iscsi Summary: Storage driver plugin for iscsi Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: iscsi-initiator-utils %description daemon-driver-storage-iscsi The storage driver backend adding implementation of the storage APIs for iscsi volumes using the host iscsi stack. %if %{with_storage_iscsi_direct} %package daemon-driver-storage-iscsi-direct Summary: Storage driver plugin for iscsi-direct Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-iscsi-direct The storage driver backend adding implementation of the storage APIs for iscsi volumes using libiscsi direct connection. %endif %package daemon-driver-storage-mpath Summary: Storage driver plugin for multipath volumes Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: device-mapper %description daemon-driver-storage-mpath The storage driver backend adding implementation of the storage APIs for multipath storage using device mapper. %if %{with_storage_gluster} %package daemon-driver-storage-gluster Summary: Storage driver plugin for gluster Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %if 0%{?fedora} Requires: glusterfs-client >= 2.0.1 %endif %if (0%{?fedora} || 0%{?with_storage_gluster}) Requires: /usr/sbin/gluster %endif %description daemon-driver-storage-gluster The storage driver backend adding implementation of the storage APIs for gluster volumes using libgfapi. %endif %if %{with_storage_rbd} %package daemon-driver-storage-rbd Summary: Storage driver plugin for rbd Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-rbd The storage driver backend adding implementation of the storage APIs for rbd volumes using the ceph protocol. %endif %if %{with_storage_zfs} %package daemon-driver-storage-zfs Summary: Storage driver plugin for ZFS Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # Support any conforming implementation of zfs Requires: /sbin/zfs Requires: /sbin/zpool %description daemon-driver-storage-zfs The storage driver backend adding implementation of the storage APIs for ZFS volumes. %endif %package daemon-driver-storage Summary: Storage driver plugin including all backends for the libvirtd daemon Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release} Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release} Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release} %if %{with_storage_iscsi_direct} Requires: libvirt-daemon-driver-storage-iscsi-direct = %{version}-%{release} %endif %if %{with_storage_gluster} Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release} %endif %if %{with_storage_rbd} Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release} %endif %if %{with_storage_zfs} Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release} %endif %description daemon-driver-storage The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using LVM, iSCSI, parted and more. %if %{with_qemu} %package daemon-driver-qemu Summary: QEMU driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: /usr/bin/qemu-img # For image compression Requires: gzip Requires: bzip2 Requires: lzop Requires: xz Requires: systemd-container Requires: swtpm-tools %description daemon-driver-qemu The qemu driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using QEMU %endif %if %{with_lxc} %package daemon-driver-lxc Summary: LXC driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # There really is a hard cross-driver dependency here Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: systemd-container %description daemon-driver-lxc The LXC driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using the Linux kernel %endif %if %{with_vbox} %package daemon-driver-vbox Summary: VirtualBox driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-vbox The vbox driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using VirtualBox %endif %if %{with_libxl} %package daemon-driver-libxl Summary: Libxl driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Obsoletes: libvirt-daemon-driver-xen < 4.3.0 %description daemon-driver-libxl The Libxl driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using Libxl %endif %if %{with_qemu_tcg} %package daemon-qemu Summary: Server side daemon & driver required to run QEMU guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu %description daemon-qemu Server side daemon and driver required to manage the virtualization capabilities of the QEMU TCG emulators %endif %if %{with_qemu_kvm} %package daemon-kvm Summary: Server side daemon & driver required to run KVM guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu-kvm %description daemon-kvm Server side daemon and driver required to manage the virtualization capabilities of the KVM hypervisor %endif %if %{with_lxc} %package daemon-lxc Summary: Server side daemon & driver required to run LXC guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-lxc Server side daemon and driver required to manage the virtualization capabilities of LXC %endif %if %{with_libxl} %package daemon-xen Summary: Server side daemon & driver required to run XEN guests Requires: libvirt-daemon = %{version}-%{release} %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: xen %description daemon-xen Server side daemon and driver required to manage the virtualization capabilities of XEN %endif %if %{with_vbox} %package daemon-vbox Summary: Server side daemon & driver required to run VirtualBox guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-vbox Server side daemon and driver required to manage the virtualization capabilities of VirtualBox %endif %package client Summary: Client side utilities of the libvirt library Requires: %{name}-libs = %{version}-%{release} # Needed by virt-pki-validate script. Requires: gnutls-utils # Ensure smooth upgrades Obsoletes: libvirt-bash-completion < 7.3.0 %description client The client binaries needed to access the virtualization capabilities of recent versions of Linux (and other OSes). %package client-qemu Summary: Additional client side utilities for QEMU Requires: %{name}-libs = %{version}-%{release} Requires: python3-libvirt >= %{version}-%{release} %description client-qemu The additional client binaries are used to interact with some QEMU specific features of libvirt. %package libs Summary: Client side libraries # So remote clients can access libvirt over SSH tunnel Requires: cyrus-sasl # Needed by default sasl.conf - no onerous extra deps, since # 100's of other things on a system already pull in krb5-libs Requires: cyrus-sasl-gssapi %description libs Shared libraries for accessing the libvirt daemon. %if %{with_wireshark} %package wireshark Summary: Wireshark dissector plugin for libvirt RPC transactions Requires: wireshark Requires: %{name}-libs = %{version}-%{release} %description wireshark Wireshark dissector plugin for better analysis of libvirt RPC traffic. %endif %if %{with_lxc} %package login-shell Summary: Login shell for connecting users to an LXC container Requires: %{name}-libs = %{version}-%{release} %description login-shell Provides the set-uid virt-login-shell binary that is used to connect a user to an LXC container when they login, by switching namespaces. %endif %package devel Summary: Libraries, includes, etc. to compile with the libvirt library Requires: %{name}-libs = %{version}-%{release} Requires: pkgconfig %description devel Include header files & development libraries for the libvirt C library. %if %{with_sanlock} %package lock-sanlock Summary: Sanlock lock manager plugin for QEMU driver Requires: sanlock >= 2.4 #for virt-sanlock-cleanup require augeas Requires: augeas Requires: %{name}-daemon = %{version}-%{release} Requires: %{name}-libs = %{version}-%{release} %description lock-sanlock Includes the Sanlock lock manager plugin for the QEMU driver %endif %package nss Summary: Libvirt plugin for Name Service Switch Requires: libvirt-daemon-driver-network = %{version}-%{release} %description nss Libvirt plugin for NSS for translating domain names into IP addresses. %if %{with_mingw} %package -n mingw32-libvirt Summary: %{summary} Obsoletes: mingw32-libvirt-static < 7.0.0 BuildArch: noarch %description -n mingw32-libvirt MinGW Windows libvirt virtualization library. %package -n mingw64-libvirt Summary: %{summary} Obsoletes: mingw64-libvirt-static < 7.0.0 BuildArch: noarch %description -n mingw64-libvirt MinGW Windows libvirt virtualization library. %{?mingw_debug_package} %endif %prep %autosetup -S git_am %build %if 0%{?fedora} >= %{min_fedora} || 0%{?rhel} >= %{min_rhel} %define supported_platform 1 %else %define supported_platform 0 %endif %if ! %{supported_platform} echo "This RPM requires either Fedora >= %{min_fedora} or RHEL >= %{min_rhel}" exit 1 %endif %if %{with_qemu} %define arg_qemu -Ddriver_qemu=enabled %else %define arg_qemu -Ddriver_qemu=disabled %endif %if %{with_openvz} %define arg_openvz -Ddriver_openvz=enabled %else %define arg_openvz -Ddriver_openvz=disabled %endif %if %{with_lxc} %define arg_lxc -Ddriver_lxc=enabled %define arg_login_shell -Dlogin_shell=enabled %else %define arg_lxc -Ddriver_lxc=disabled %define arg_login_shell -Dlogin_shell=disabled %endif %if %{with_vbox} %define arg_vbox -Ddriver_vbox=enabled %else %define arg_vbox -Ddriver_vbox=disabled %endif %if %{with_libxl} %define arg_libxl -Ddriver_libxl=enabled %else %define arg_libxl -Ddriver_libxl=disabled %endif %if %{with_esx} %define arg_esx -Ddriver_esx=enabled -Dcurl=enabled %else %define arg_esx -Ddriver_esx=disabled -Dcurl=disabled %endif %if %{with_hyperv} %define arg_hyperv -Ddriver_hyperv=enabled -Dopenwsman=enabled %else %define arg_hyperv -Ddriver_hyperv=disabled -Dopenwsman=disabled %endif %if %{with_vmware} %define arg_vmware -Ddriver_vmware=enabled %else %define arg_vmware -Ddriver_vmware=disabled %endif %if %{with_storage_rbd} %define arg_storage_rbd -Dstorage_rbd=enabled %else %define arg_storage_rbd -Dstorage_rbd=disabled %endif %if %{with_storage_gluster} %define arg_storage_gluster -Dstorage_gluster=enabled -Dglusterfs=enabled %else %define arg_storage_gluster -Dstorage_gluster=disabled -Dglusterfs=disabled %endif %if %{with_storage_zfs} %define arg_storage_zfs -Dstorage_zfs=enabled %else %define arg_storage_zfs -Dstorage_zfs=disabled %endif %if %{with_numactl} %define arg_numactl -Dnumactl=enabled %else %define arg_numactl -Dnumactl=disabled %endif %if %{with_numad} %define arg_numad -Dnumad=enabled %else %define arg_numad -Dnumad=disabled %endif %if %{with_fuse} %define arg_fuse -Dfuse=enabled %else %define arg_fuse -Dfuse=disabled %endif %if %{with_sanlock} %define arg_sanlock -Dsanlock=enabled %else %define arg_sanlock -Dsanlock=disabled %endif %if %{with_firewalld_zone} %define arg_firewalld_zone -Dfirewalld_zone=enabled %else %define arg_firewalld_zone -Dfirewalld_zone=disabled %endif %if %{with_netcf} %define arg_netcf -Dnetcf=enabled %else %define arg_netcf -Dnetcf=disabled %endif %if %{with_wireshark} %define arg_wireshark -Dwireshark_dissector=enabled %else %define arg_wireshark -Dwireshark_dissector=disabled %endif %if %{with_storage_iscsi_direct} %define arg_storage_iscsi_direct -Dstorage_iscsi_direct=enabled -Dlibiscsi=enabled %else %define arg_storage_iscsi_direct -Dstorage_iscsi_direct=disabled -Dlibiscsi=disabled %endif %if %{with_libssh} %define arg_libssh -Dlibssh=enabled %else %define arg_libssh -Dlibssh=disabled %endif %if %{with_libssh2} %define arg_libssh2 -Dlibssh2=enabled %else %define arg_libssh2 -Dlibssh2=disabled %endif %if %{with_modular_daemons} %define arg_remote_mode -Dremote_default_mode=direct %else %define arg_remote_mode -Dremote_default_mode=legacy %endif %define when %(date +"%%F-%%T") %define where %(hostname) %define who %{?packager}%{!?packager:Unknown} %define arg_packager -Dpackager="%{who}, %{when}, %{where}" %define arg_packager_version -Dpackager_version="%{release}" %define arg_selinux_mount -Dselinux_mount="/sys/fs/selinux" # place macros above and build commands below this comment export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec) %meson \ -Drunstatedir=%{_rundir} \ %{?arg_qemu} \ %{?arg_openvz} \ %{?arg_lxc} \ %{?arg_vbox} \ %{?arg_libxl} \ -Dsasl=enabled \ -Dpolkit=enabled \ -Ddriver_libvirtd=enabled \ -Ddriver_remote=enabled \ -Ddriver_test=enabled \ %{?arg_esx} \ %{?arg_hyperv} \ %{?arg_vmware} \ -Ddriver_vz=disabled \ -Ddriver_bhyve=disabled \ -Ddriver_ch=disabled \ %{?arg_remote_mode} \ -Ddriver_interface=enabled \ -Ddriver_network=enabled \ -Dstorage_fs=enabled \ -Dstorage_lvm=enabled \ -Dstorage_iscsi=enabled \ %{?arg_storage_iscsi_direct} \ -Dstorage_scsi=enabled \ -Dstorage_disk=enabled \ -Dstorage_mpath=enabled \ %{?arg_storage_rbd} \ %{?arg_storage_gluster} \ %{?arg_storage_zfs} \ -Dstorage_vstorage=disabled \ %{?arg_numactl} \ %{?arg_numad} \ -Dcapng=enabled \ %{?arg_fuse} \ %{?arg_netcf} \ -Dselinux=enabled \ %{?arg_selinux_mount} \ -Dapparmor=disabled \ -Dapparmor_profiles=disabled \ -Dsecdriver_apparmor=disabled \ -Dudev=enabled \ -Dyajl=enabled \ %{?arg_sanlock} \ -Dlibpcap=enabled \ -Dlibnl=enabled \ -Daudit=enabled \ -Ddtrace=enabled \ -Dfirewalld=enabled \ %{?arg_firewalld_zone} \ %{?arg_wireshark} \ %{?arg_libssh} \ %{?arg_libssh2} \ -Dpm_utils=disabled \ -Dnss=enabled \ %{arg_packager} \ %{arg_packager_version} \ -Dqemu_user=%{qemu_user} \ -Dqemu_group=%{qemu_group} \ -Dqemu_moddir=%{qemu_moddir} \ -Dqemu_datadir=%{qemu_datadir} \ -Dtls_priority=%{tls_priority} \ %{?enable_werror} \ -Dexpensive_tests=enabled \ -Dinit_script=systemd \ -Ddocs=enabled \ -Dtests=enabled \ -Drpath=disabled \ %{?arg_login_shell} %meson_build %if %{with_mingw} %mingw_meson \ --auto-features=enabled \ -Ddriver_remote=enabled \ -Ddriver_test=enabled \ -Ddriver_esx=enabled \ -Dcurl=enabled \ -Ddocs=enabled \ -Dapparmor=disabled \ -Dapparmor_profiles=disabled \ -Dattr=disabled \ -Daudit=disabled \ -Dbash_completion=disabled \ -Dblkid=disabled \ -Dcapng=disabled \ -Ddriver_bhyve=disabled \ -Ddriver_hyperv=disabled \ -Ddriver_interface=disabled \ -Ddriver_libvirtd=disabled \ -Ddriver_libxl=disabled \ -Ddriver_lxc=disabled \ -Ddriver_network=disabled \ -Ddriver_openvz=disabled \ -Ddriver_qemu=disabled \ -Ddriver_secrets=disabled \ -Ddriver_vbox=disabled \ -Ddriver_vmware=disabled \ -Ddriver_vz=disabled \ -Ddtrace=disabled \ -Dexpensive_tests=enabled \ -Dfirewalld=disabled \ -Dfirewalld_zone=disabled \ -Dfuse=disabled \ -Dglusterfs=disabled \ -Dhost_validate=disabled \ -Dlibiscsi=disabled \ -Dlibnl=disabled \ -Dlibpcap=disabled \ -Dlibssh2=disabled \ -Dlibssh=disabled \ -Dlogin_shell=disabled \ -Dnetcf=disabled \ -Dnls=disabled \ -Dnss=disabled \ -Dnumactl=disabled \ -Dnumad=disabled \ -Dopenwsman=disabled \ -Dpciaccess=disabled \ -Dpm_utils=disabled \ -Dpolkit=disabled \ -Dreadline=disabled \ -Drpath=disabled \ -Dsanlock=disabled \ -Dsasl=disabled \ -Dsecdriver_apparmor=disabled \ -Dsecdriver_selinux=disabled \ -Dselinux=disabled \ -Dstorage_dir=disabled \ -Dstorage_disk=disabled \ -Dstorage_fs=disabled \ -Dstorage_gluster=disabled \ -Dstorage_iscsi_direct=disabled \ -Dstorage_iscsi=disabled \ -Dstorage_lvm=disabled \ -Dstorage_mpath=disabled \ -Dstorage_rbd=disabled \ -Dstorage_scsi=disabled \ -Dstorage_vstorage=disabled \ -Dstorage_zfs=disabled \ -Dsysctl_config=disabled \ -Dtests=disabled \ -Dudev=disabled \ -Dwireshark_dissector=disabled \ -Dyajl=disabled %mingw_ninja %endif %install rm -fr %{buildroot} export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec) %meson_install # We don't want to install /etc/libvirt/qemu/networks in the main %%files list # because if the admin wants to delete the default network completely, we don't # want to end up re-incarnating it on every RPM upgrade. install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/ cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml # libvirt saves this file with mode 0600 chmod 0600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml # nwfilter files are installed in /usr/share/libvirt and copied to /etc in %%post # to avoid verification errors on changed files in /etc install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ # libvirt saves these files with mode 600 chmod 600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml %if ! %{with_qemu} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %endif %find_lang %{name} %if ! %{with_sanlock} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %endif %if ! %{with_lxc} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %endif %if ! %{with_qemu} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu %endif %if ! %{with_lxc} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc %endif %if ! %{with_libxl} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %endif # Copied into libvirt-docs subpackage eventually mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt libvirt-docs %ifarch %{arches_systemtap_64bit} mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp %if %{with_qemu} mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp %endif %endif %if %{with_mingw} %mingw_ninja_install rm -rf $RPM_BUILD_ROOT%{mingw32_sysconfdir}/libvirt/nwfilter rm -rf $RPM_BUILD_ROOT%{mingw64_sysconfdir}/libvirt/nwfilter rm -rf $RPM_BUILD_ROOT%{mingw32_datadir}/doc/* rm -rf $RPM_BUILD_ROOT%{mingw64_datadir}/doc/* rm -rf $RPM_BUILD_ROOT%{mingw32_datadir}/gtk-doc/* rm -rf $RPM_BUILD_ROOT%{mingw64_datadir}/gtk-doc/* rm -rf $RPM_BUILD_ROOT%{mingw32_libexecdir}/libvirt_iohelper.exe rm -rf $RPM_BUILD_ROOT%{mingw64_libexecdir}/libvirt_iohelper.exe rm -rf $RPM_BUILD_ROOT%{mingw32_libexecdir}/libvirt-guests.sh rm -rf $RPM_BUILD_ROOT%{mingw64_libexecdir}/libvirt-guests.sh %mingw_debug_install_post %endif %check # Building on slow archs, like emulated s390x in Fedora copr, requires # raising the test timeout VIR_TEST_DEBUG=1 %meson_test --no-suite syntax-check --timeout-multiplier 10 %define libvirt_daemon_schedule_restart() mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || : \ /bin/systemctl is-active %1.service 1>/dev/null 2>&1 && \ touch %{_localstatedir}/lib/rpm-state/libvirt/restart-%1 || : %define libvirt_daemon_finish_restart() rm -f %{_localstatedir}/lib/rpm-state/libvirt/restart-%1 \ rmdir %{_localstatedir}/lib/rpm-state/libvirt 2>/dev/null || : %define libvirt_daemon_needs_restart() -f %{_localstatedir}/lib/rpm-state/libvirt/restart-%1 %define libvirt_daemon_perform_restart() if test %libvirt_daemon_needs_restart %1 \ then \ /bin/systemctl try-restart %1.service >/dev/null 2>&1 || : \ fi \ %libvirt_daemon_finish_restart %1 # For daemons with only UNIX sockets %define libvirt_daemon_systemd_post() %systemd_post %1.socket %1-ro.socket %1-admin.socket %1.service %define libvirt_daemon_systemd_preun() %systemd_preun %1.service %1-ro.socket %1-admin.socket %1.socket # For daemons with UNIX and INET sockets %define libvirt_daemon_systemd_post_inet() %systemd_post %1.socket %1-ro.socket %1-admin.socket %1-tls.socket %1-tcp.socket %1.service %define libvirt_daemon_systemd_preun_inet() %systemd_preun %1.service %1-ro.socket %1-admin.socket %1-tls.socket %1-tcp.socket %1.socket # For daemons with only UNIX sockets and no unprivileged read-only access %define libvirt_daemon_systemd_post_priv() %systemd_post %1.socket %1-admin.socket %1.service %define libvirt_daemon_systemd_preun_priv() %systemd_preun %1.service %1-admin.socket %1.socket %pre daemon %libvirt_sysconfig_pre libvirtd virtproxyd virtlogd virtlockd libvirt-guests # 'libvirt' group is just to allow password-less polkit access to # libvirtd. The uid number is irrelevant, so we use dynamic allocation # described at the above link. getent group libvirt >/dev/null || groupadd -r libvirt exit 0 %post daemon %libvirt_daemon_systemd_post_priv virtlogd %libvirt_daemon_systemd_post_priv virtlockd %if %{with_modular_daemons} %libvirt_daemon_systemd_post_inet virtproxyd %else %libvirt_daemon_systemd_post_inet libvirtd %endif %systemd_post libvirt-guests.service %libvirt_daemon_schedule_restart libvirtd %preun daemon %systemd_preun libvirt-guests.service %libvirt_daemon_systemd_preun_inet libvirtd %libvirt_daemon_systemd_preun_inet virtproxyd %libvirt_daemon_systemd_preun_priv virtlogd %libvirt_daemon_systemd_preun_priv virtlockd %postun daemon /bin/systemctl daemon-reload >/dev/null 2>&1 || : if [ $1 -ge 1 ] ; then /bin/systemctl reload-or-try-restart virtlockd.service virtlogd.service >/dev/null 2>&1 || : fi %systemd_postun libvirt-guests.service # In upgrade scenario we must explicitly enable virtlockd/virtlogd # sockets, if libvirtd is already enabled and start them if # libvirtd is running, otherwise you'll get failures to start # guests %triggerpostun daemon -- libvirt-daemon < 1.3.0 if [ $1 -ge 1 ] ; then /bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 && /bin/systemctl enable virtlogd.socket virtlogd-admin.socket || : /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 && /bin/systemctl start virtlogd.socket virtlogd-admin.socket || : fi %posttrans daemon %libvirt_sysconfig_posttrans libvirtd virtproxyd virtlogd virtlockd libvirt-guests if test %libvirt_daemon_needs_restart libvirtd then # See if user has previously modified their install to # tell libvirtd to use --listen grep -E '^LIBVIRTD_ARGS=.*--listen' /etc/sysconfig/libvirtd 1>/dev/null 2>&1 if test $? = 0 then # Then lets keep honouring --listen and *not* use # systemd socket activation, because switching things # might confuse mgmt tool like puppet/ansible that # expect the old style libvirtd /bin/systemctl mask \ libvirtd.socket \ libvirtd-ro.socket \ libvirtd-admin.socket \ libvirtd-tls.socket \ libvirtd-tcp.socket >/dev/null 2>&1 || : else # Old libvirtd owns the sockets and will delete them on # shutdown. Can't use a try-restart as libvirtd will simply # own the sockets again when it comes back up. Thus we must # do this particular ordering, so that we get libvirtd # running with socket activation in use /bin/systemctl stop libvirtd.service >/dev/null 2>&1 || : /bin/systemctl try-restart \ libvirtd.socket \ libvirtd-ro.socket \ libvirtd-admin.socket >/dev/null 2>&1 || : /bin/systemctl start libvirtd.service >/dev/null 2>&1 || : fi fi %libvirt_daemon_finish_restart libvirtd %pre daemon-driver-network %libvirt_sysconfig_pre virtnetworkd %post daemon-driver-network %if %{with_firewalld_zone} %firewalld_reload %endif %if %{with_modular_daemons} %libvirt_daemon_systemd_post virtnetworkd %endif %libvirt_daemon_schedule_restart virtnetworkd %preun daemon-driver-network %libvirt_daemon_systemd_preun virtnetworkd %postun daemon-driver-network %if %{with_firewalld_zone} %firewalld_reload %endif %posttrans daemon-driver-network %libvirt_sysconfig_posttrans virtnetworkd %libvirt_daemon_perform_restart virtnetworkd %pre daemon-driver-nwfilter %libvirt_sysconfig_pre virtnwfilterd %post daemon-driver-nwfilter %if %{with_modular_daemons} %libvirt_daemon_systemd_post virtnwfilterd %endif %libvirt_daemon_schedule_restart virtnwfilterd %preun daemon-driver-nwfilter %libvirt_daemon_systemd_preun virtnwfilterd %posttrans daemon-driver-nwfilter %libvirt_sysconfig_posttrans virtnwfilterd %libvirt_daemon_perform_restart virtnwfilterd %pre daemon-driver-nodedev %libvirt_sysconfig_pre virtnodedevd %post daemon-driver-nodedev %if %{with_modular_daemons} %libvirt_daemon_systemd_post virtnodedevd %endif %libvirt_daemon_schedule_restart virtnodedevd %preun daemon-driver-nodedev %libvirt_daemon_systemd_preun virtnodedevd %posttrans daemon-driver-nodedev %libvirt_sysconfig_posttrans virtnodedevd %libvirt_daemon_perform_restart virtnodedevd %pre daemon-driver-interface %libvirt_sysconfig_pre virtinterfaced %post daemon-driver-interface %if %{with_modular_daemons} %libvirt_daemon_systemd_post virtinterfaced %endif %libvirt_daemon_schedule_restart virtinterfaced %preun daemon-driver-interface %libvirt_daemon_systemd_preun virtinterfaced %posttrans daemon-driver-interface %libvirt_sysconfig_posttrans virtinterfaced %libvirt_daemon_perform_restart virtinterfaced %pre daemon-driver-secret %libvirt_sysconfig_pre virtsecretd %post daemon-driver-secret %if %{with_modular_daemons} %libvirt_daemon_systemd_post virtsecretd %endif %libvirt_daemon_schedule_restart virtsecretd %preun daemon-driver-secret %libvirt_daemon_systemd_preun virtsecretd %posttrans daemon-driver-secret %libvirt_sysconfig_posttrans virtsecretd %libvirt_daemon_perform_restart virtsecretd %pre daemon-driver-storage-core %libvirt_sysconfig_pre virtstoraged %post daemon-driver-storage-core %if %{with_modular_daemons} %libvirt_daemon_systemd_post virtstoraged %endif %libvirt_daemon_schedule_restart virtstoraged %preun daemon-driver-storage-core %libvirt_daemon_systemd_preun virtstoraged %posttrans daemon-driver-storage-core %libvirt_sysconfig_posttrans virtstoraged %libvirt_daemon_perform_restart virtstoraged %if %{with_qemu} %pre daemon-driver-qemu %libvirt_sysconfig_pre virtqemud # We want soft static allocation of well-known ids, as disk images # are commonly shared across NFS mounts by id rather than name; see # https://fedoraproject.org/wiki/Packaging:UsersAndGroups getent group kvm >/dev/null || groupadd -f -g 36 -r kvm getent group qemu >/dev/null || groupadd -f -g 107 -r qemu if ! getent passwd qemu >/dev/null; then if ! getent passwd 107 >/dev/null; then useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu else useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu fi fi exit 0 %post daemon-driver-qemu %if %{with_modular_daemons} %libvirt_daemon_systemd_post virtqemud %endif %libvirt_daemon_schedule_restart virtqemud %preun daemon-driver-qemu %libvirt_daemon_systemd_preun virtqemud %posttrans daemon-driver-qemu %libvirt_sysconfig_posttrans virtqemud %libvirt_daemon_perform_restart virtqemud %endif %if %{with_lxc} %pre daemon-driver-lxc %libvirt_sysconfig_pre virtlxcd %post daemon-driver-lxc %if %{with_modular_daemons} %libvirt_daemon_systemd_post virtlxcd %endif %libvirt_daemon_schedule_restart virtlxcd %preun daemon-driver-lxc %libvirt_daemon_systemd_preun virtlxcd %posttrans daemon-driver-lxc %libvirt_sysconfig_posttrans virtlxcd %libvirt_daemon_perform_restart virtlxcd %endif %if %{with_vbox} %post daemon-driver-vbox %if %{with_modular_daemons} %libvirt_daemon_systemd_post virtvboxd %endif %libvirt_daemon_schedule_restart virtvboxd %pre daemon-driver-vbox %libvirt_sysconfig_pre virtvboxd %preun daemon-driver-vbox %libvirt_daemon_systemd_preun virtvboxd %posttrans daemon-driver-vbox %libvirt_sysconfig_posttrans virtvboxd %libvirt_daemon_perform_restart virtvboxd %endif %if %{with_libxl} %post daemon-driver-libxl %if %{with_modular_daemons} %libvirt_daemon_systemd_post virtxend %endif %libvirt_daemon_schedule_restart virtxend %pre daemon-driver-libxl %libvirt_sysconfig_pre virtxend %preun daemon-driver-libxl %libvirt_daemon_systemd_preun virtxend %posttrans daemon-driver-libxl %libvirt_sysconfig_posttrans virtxend %libvirt_daemon_perform_restart virtxend %endif %post daemon-config-network if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then # see if the network used by default network creates a conflict, # and try to resolve it # NB: 192.168.122.0/24 is used in the default.xml template file; # do not modify any of those values here without also modifying # them in the template. orig_sub=122 sub=${orig_sub} nl=' ' routes="${nl}$(ip route show | cut -d' ' -f1)${nl}" case ${routes} in *"${nl}192.168.${orig_sub}.0/24${nl}"*) # there was a match, so we need to look for an unused subnet for new_sub in $(seq 124 254); do case ${routes} in *"${nl}192.168.${new_sub}.0/24${nl}"*) ;; *) sub=$new_sub break; ;; esac done ;; *) ;; esac sed -e "s/${orig_sub}/${sub}/g" \ < %{_datadir}/libvirt/networks/default.xml \ > %{_sysconfdir}/libvirt/qemu/networks/default.xml ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml # libvirt saves this file with mode 0600 chmod 0600 %{_sysconfdir}/libvirt/qemu/networks/default.xml # Make sure libvirt picks up the new network defininiton %libvirt_daemon_schedule_restart libvirtd %libvirt_daemon_schedule_restart virtnetworkd fi %posttrans daemon-config-network %libvirt_daemon_perform_restart libvirtd %libvirt_daemon_perform_restart virtnetworkd %post daemon-config-nwfilter for datadir_file in %{_datadir}/libvirt/nwfilter/*.xml; do sysconfdir_file=%{_sysconfdir}/libvirt/nwfilter/$(basename "$datadir_file") if [ ! -f "$sysconfdir_file" ]; then # libvirt saves these files with mode 600 install -m 0600 "$datadir_file" "$sysconfdir_file" fi done # Make sure libvirt picks up the new nwfilter defininitons %libvirt_daemon_schedule_restart libvirtd %libvirt_daemon_schedule_restart virtnwfilterd %posttrans daemon-config-nwfilter %libvirt_daemon_perform_restart libvirtd %libvirt_daemon_perform_restart virtnwfilterd %if %{with_lxc} %pre login-shell getent group virtlogin >/dev/null || groupadd -r virtlogin exit 0 %endif %files %files docs %doc AUTHORS.rst NEWS.rst README.rst %doc libvirt-docs/* %files daemon %{_unitdir}/libvirtd.service %{_unitdir}/libvirtd.socket %{_unitdir}/libvirtd-ro.socket %{_unitdir}/libvirtd-admin.socket %{_unitdir}/libvirtd-tcp.socket %{_unitdir}/libvirtd-tls.socket %{_unitdir}/virtproxyd.service %{_unitdir}/virtproxyd.socket %{_unitdir}/virtproxyd-ro.socket %{_unitdir}/virtproxyd-admin.socket %{_unitdir}/virtproxyd-tcp.socket %{_unitdir}/virtproxyd-tls.socket %{_unitdir}/virt-guest-shutdown.target %{_unitdir}/virtlogd.service %{_unitdir}/virtlogd.socket %{_unitdir}/virtlogd-admin.socket %{_unitdir}/virtlockd.service %{_unitdir}/virtlockd.socket %{_unitdir}/virtlockd-admin.socket %{_unitdir}/libvirt-guests.service %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtproxyd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf %config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd %dir %{_datadir}/libvirt/ %ghost %dir %{_rundir}/libvirt/ %ghost %dir %{_rundir}/libvirt/common/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/ %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/ %dir %attr(0755, root, root) %{_libdir}/libvirt/ %dir %attr(0755, root, root) %{_libdir}/libvirt/connection-driver/ %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so %{_datadir}/augeas/lenses/libvirtd.aug %{_datadir}/augeas/lenses/tests/test_libvirtd.aug %{_datadir}/augeas/lenses/virtlogd.aug %{_datadir}/augeas/lenses/tests/test_virtlogd.aug %{_datadir}/augeas/lenses/virtlockd.aug %{_datadir}/augeas/lenses/tests/test_virtlockd.aug %{_datadir}/augeas/lenses/virtproxyd.aug %{_datadir}/augeas/lenses/tests/test_virtproxyd.aug %{_datadir}/augeas/lenses/libvirt_lockd.aug %if %{with_qemu} %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug %endif %{_datadir}/polkit-1/actions/org.libvirt.unix.policy %{_datadir}/polkit-1/actions/org.libvirt.api.policy %{_datadir}/polkit-1/rules.d/50-libvirt.rules %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/ %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper %attr(0755, root, root) %{_bindir}/virt-ssh-helper %attr(0755, root, root) %{_sbindir}/libvirtd %attr(0755, root, root) %{_sbindir}/virtproxyd %attr(0755, root, root) %{_sbindir}/virtlogd %attr(0755, root, root) %{_sbindir}/virtlockd %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh %{_mandir}/man1/virt-admin.1* %{_mandir}/man1/virt-host-validate.1* %{_mandir}/man8/virt-ssh-helper.8* %{_mandir}/man8/libvirt-guests.8* %{_mandir}/man8/libvirtd.8* %{_mandir}/man8/virtlogd.8* %{_mandir}/man8/virtlockd.8* %{_mandir}/man8/virtproxyd.8* %{_bindir}/virt-host-validate %{_bindir}/virt-admin %{_datadir}/bash-completion/completions/virt-admin %files daemon-config-network %dir %{_datadir}/libvirt/networks/ %{_datadir}/libvirt/networks/default.xml %ghost %{_sysconfdir}/libvirt/qemu/networks/default.xml %ghost %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml %files daemon-config-nwfilter %dir %{_datadir}/libvirt/nwfilter/ %{_datadir}/libvirt/nwfilter/*.xml %ghost %{_sysconfdir}/libvirt/nwfilter/*.xml %files daemon-driver-interface %config(noreplace) %{_sysconfdir}/libvirt/virtinterfaced.conf %{_datadir}/augeas/lenses/virtinterfaced.aug %{_datadir}/augeas/lenses/tests/test_virtinterfaced.aug %{_unitdir}/virtinterfaced.service %{_unitdir}/virtinterfaced.socket %{_unitdir}/virtinterfaced-ro.socket %{_unitdir}/virtinterfaced-admin.socket %attr(0755, root, root) %{_sbindir}/virtinterfaced %ghost %dir %{_rundir}/libvirt/interface/ %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so %{_mandir}/man8/virtinterfaced.8* %files daemon-driver-network %config(noreplace) %{_sysconfdir}/libvirt/virtnetworkd.conf %{_datadir}/augeas/lenses/virtnetworkd.aug %{_datadir}/augeas/lenses/tests/test_virtnetworkd.aug %{_unitdir}/virtnetworkd.service %{_unitdir}/virtnetworkd.socket %{_unitdir}/virtnetworkd-ro.socket %{_unitdir}/virtnetworkd-admin.socket %attr(0755, root, root) %{_sbindir}/virtnetworkd %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart %ghost %dir %{_rundir}/libvirt/network/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/ %attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so %{_mandir}/man8/virtnetworkd.8* %if %{with_firewalld_zone} %{_prefix}/lib/firewalld/zones/libvirt.xml %endif %files daemon-driver-nodedev %config(noreplace) %{_sysconfdir}/libvirt/virtnodedevd.conf %{_datadir}/augeas/lenses/virtnodedevd.aug %{_datadir}/augeas/lenses/tests/test_virtnodedevd.aug %{_unitdir}/virtnodedevd.service %{_unitdir}/virtnodedevd.socket %{_unitdir}/virtnodedevd-ro.socket %{_unitdir}/virtnodedevd-admin.socket %attr(0755, root, root) %{_sbindir}/virtnodedevd %ghost %dir %{_rundir}/libvirt/nodedev/ %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so %{_mandir}/man8/virtnodedevd.8* %files daemon-driver-nwfilter %config(noreplace) %{_sysconfdir}/libvirt/virtnwfilterd.conf %{_datadir}/augeas/lenses/virtnwfilterd.aug %{_datadir}/augeas/lenses/tests/test_virtnwfilterd.aug %{_unitdir}/virtnwfilterd.service %{_unitdir}/virtnwfilterd.socket %{_unitdir}/virtnwfilterd-ro.socket %{_unitdir}/virtnwfilterd-admin.socket %attr(0755, root, root) %{_sbindir}/virtnwfilterd %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/ %ghost %dir %{_rundir}/libvirt/network/ %ghost %dir %{_rundir}/libvirt/nwfilter-binding/ %ghost %dir %{_rundir}/libvirt/nwfilter/ %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so %{_mandir}/man8/virtnwfilterd.8* %files daemon-driver-secret %config(noreplace) %{_sysconfdir}/libvirt/virtsecretd.conf %{_datadir}/augeas/lenses/virtsecretd.aug %{_datadir}/augeas/lenses/tests/test_virtsecretd.aug %{_unitdir}/virtsecretd.service %{_unitdir}/virtsecretd.socket %{_unitdir}/virtsecretd-ro.socket %{_unitdir}/virtsecretd-admin.socket %attr(0755, root, root) %{_sbindir}/virtsecretd %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/secrets/ %ghost %dir %{_rundir}/libvirt/secrets/ %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so %{_mandir}/man8/virtsecretd.8* %files daemon-driver-storage %files daemon-driver-storage-core %config(noreplace) %{_sysconfdir}/libvirt/virtstoraged.conf %{_datadir}/augeas/lenses/virtstoraged.aug %{_datadir}/augeas/lenses/tests/test_virtstoraged.aug %{_unitdir}/virtstoraged.service %{_unitdir}/virtstoraged.socket %{_unitdir}/virtstoraged-ro.socket %{_unitdir}/virtstoraged-admin.socket %attr(0755, root, root) %{_sbindir}/virtstoraged %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/storage/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/storage/autostart/ %ghost %dir %{_rundir}/libvirt/storage/ %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_fs.so %{_libdir}/%{name}/storage-file/libvirt_storage_file_fs.so %{_mandir}/man8/virtstoraged.8* %files daemon-driver-storage-disk %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_disk.so %files daemon-driver-storage-logical %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_logical.so %files daemon-driver-storage-scsi %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_scsi.so %files daemon-driver-storage-iscsi %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi.so %if %{with_storage_iscsi_direct} %files daemon-driver-storage-iscsi-direct %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi-direct.so %endif %files daemon-driver-storage-mpath %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_mpath.so %if %{with_storage_gluster} %files daemon-driver-storage-gluster %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_gluster.so %{_libdir}/%{name}/storage-file/libvirt_storage_file_gluster.so %endif %if %{with_storage_rbd} %files daemon-driver-storage-rbd %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_rbd.so %endif %if %{with_storage_zfs} %files daemon-driver-storage-zfs %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_zfs.so %endif %if %{with_qemu} %files daemon-driver-qemu %config(noreplace) %{_sysconfdir}/libvirt/virtqemud.conf %config(noreplace) %{_prefix}/lib/sysctl.d/60-qemu-postcopy-migration.conf %{_datadir}/augeas/lenses/virtqemud.aug %{_datadir}/augeas/lenses/tests/test_virtqemud.aug %{_unitdir}/virtqemud.service %{_unitdir}/virtqemud.socket %{_unitdir}/virtqemud-ro.socket %{_unitdir}/virtqemud-admin.socket %attr(0755, root, root) %{_sbindir}/virtqemud %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/autostart/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/ %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu %ghost %dir %{_rundir}/libvirt/qemu/ %ghost %dir %{_rundir}/libvirt/qemu/dbus/ %ghost %dir %{_rundir}/libvirt/qemu/slirp/ %ghost %dir %{_rundir}/libvirt/qemu/swtpm/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/channel/target/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/checkpoint/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/dump/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/nvram/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ram/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/save/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/snapshot/ %dir %attr(0750, root, root) %{_localstatedir}/cache/libvirt/qemu/ %{_datadir}/augeas/lenses/libvirtd_qemu.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/swtpm/ %dir %attr(0730, tss, tss) %{_localstatedir}/log/swtpm/libvirt/qemu/ %{_bindir}/virt-qemu-run %{_mandir}/man1/virt-qemu-run.1* %{_mandir}/man8/virtqemud.8* %endif %if %{with_lxc} %files daemon-driver-lxc %config(noreplace) %{_sysconfdir}/libvirt/virtlxcd.conf %{_datadir}/augeas/lenses/virtlxcd.aug %{_datadir}/augeas/lenses/tests/test_virtlxcd.aug %{_unitdir}/virtlxcd.service %{_unitdir}/virtlxcd.socket %{_unitdir}/virtlxcd-ro.socket %{_unitdir}/virtlxcd-admin.socket %attr(0755, root, root) %{_sbindir}/virtlxcd %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/lxc/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/lxc/autostart/ %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc %ghost %dir %{_rundir}/libvirt/lxc/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/ %{_datadir}/augeas/lenses/libvirtd_lxc.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %attr(0755, root, root) %{_libexecdir}/libvirt_lxc %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so %{_mandir}/man8/virtlxcd.8* %endif %if %{with_libxl} %files daemon-driver-libxl %config(noreplace) %{_sysconfdir}/libvirt/virtxend.conf %{_datadir}/augeas/lenses/virtxend.aug %{_datadir}/augeas/lenses/tests/test_virtxend.aug %{_unitdir}/virtxend.service %{_unitdir}/virtxend.socket %{_unitdir}/virtxend-ro.socket %{_unitdir}/virtxend-admin.socket %attr(0755, root, root) %{_sbindir}/virtxend %config(noreplace) %{_sysconfdir}/libvirt/libxl.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl %config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/libxl/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/libxl/autostart/ %{_datadir}/augeas/lenses/libvirtd_libxl.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/ %ghost %dir %{_rundir}/libvirt/libxl/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/channel/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/channel/target/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/dump/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/save/ %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so %{_mandir}/man8/virtxend.8* %endif %if %{with_vbox} %files daemon-driver-vbox %config(noreplace) %{_sysconfdir}/libvirt/virtvboxd.conf %{_datadir}/augeas/lenses/virtvboxd.aug %{_datadir}/augeas/lenses/tests/test_virtvboxd.aug %{_unitdir}/virtvboxd.service %{_unitdir}/virtvboxd.socket %{_unitdir}/virtvboxd-ro.socket %{_unitdir}/virtvboxd-admin.socket %attr(0755, root, root) %{_sbindir}/virtvboxd %{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so %{_mandir}/man8/virtvboxd.8* %endif %if %{with_qemu_tcg} %files daemon-qemu %endif %if %{with_qemu_kvm} %files daemon-kvm %endif %if %{with_lxc} %files daemon-lxc %endif %if %{with_libxl} %files daemon-xen %endif %if %{with_vbox} %files daemon-vbox %endif %if %{with_sanlock} %files lock-sanlock %if %{with_qemu} %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf %endif %if %{with_libxl} %config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf %endif %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so %{_datadir}/augeas/lenses/libvirt_sanlock.aug %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %dir %attr(0770, root, sanlock) %{_localstatedir}/lib/libvirt/sanlock %{_sbindir}/virt-sanlock-cleanup %{_mandir}/man8/virt-sanlock-cleanup.8* %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper %endif %files client %{_mandir}/man1/virsh.1* %{_mandir}/man1/virt-xml-validate.1* %{_mandir}/man1/virt-pki-query-dn.1* %{_mandir}/man1/virt-pki-validate.1* %{_mandir}/man7/virkey*.7* %{_bindir}/virsh %{_bindir}/virt-xml-validate %{_bindir}/virt-pki-query-dn %{_bindir}/virt-pki-validate %{_datadir}/bash-completion/completions/virsh %if %{with_qemu} %files client-qemu %{_mandir}/man1/virt-qemu-qmp-proxy.1* %{_bindir}/virt-qemu-qmp-proxy %endif %files libs -f %{name}.lang %license COPYING COPYING.LESSER %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/ %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf %config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf %{_libdir}/libvirt.so.* %{_libdir}/libvirt-qemu.so.* %{_libdir}/libvirt-lxc.so.* %{_libdir}/libvirt-admin.so.* %dir %{_datadir}/libvirt/ %dir %{_datadir}/libvirt/schemas/ %{_datadir}/systemtap/tapset/libvirt_probes*.stp %{_datadir}/systemtap/tapset/libvirt_functions.stp %if %{with_qemu} %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp %endif %{_datadir}/libvirt/schemas/*.rng %{_datadir}/libvirt/cpu_map/*.xml %{_datadir}/libvirt/test-screenshot.png %if %{with_wireshark} %files wireshark %{wireshark_plugindir}/libvirt.so %endif %files nss %{_libdir}/libnss_libvirt.so.2 %{_libdir}/libnss_libvirt_guest.so.2 %if %{with_lxc} %files login-shell %attr(4750, root, virtlogin) %{_bindir}/virt-login-shell %{_libexecdir}/virt-login-shell-helper %config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf %{_mandir}/man1/virt-login-shell.1* %endif %files devel %{_libdir}/libvirt.so %{_libdir}/libvirt-admin.so %{_libdir}/libvirt-qemu.so %{_libdir}/libvirt-lxc.so %dir %{_includedir}/libvirt %{_includedir}/libvirt/virterror.h %{_includedir}/libvirt/libvirt.h %{_includedir}/libvirt/libvirt-admin.h %{_includedir}/libvirt/libvirt-common.h %{_includedir}/libvirt/libvirt-domain.h %{_includedir}/libvirt/libvirt-domain-checkpoint.h %{_includedir}/libvirt/libvirt-domain-snapshot.h %{_includedir}/libvirt/libvirt-event.h %{_includedir}/libvirt/libvirt-host.h %{_includedir}/libvirt/libvirt-interface.h %{_includedir}/libvirt/libvirt-network.h %{_includedir}/libvirt/libvirt-nodedev.h %{_includedir}/libvirt/libvirt-nwfilter.h %{_includedir}/libvirt/libvirt-secret.h %{_includedir}/libvirt/libvirt-storage.h %{_includedir}/libvirt/libvirt-stream.h %{_includedir}/libvirt/libvirt-qemu.h %{_includedir}/libvirt/libvirt-lxc.h %{_libdir}/pkgconfig/libvirt.pc %{_libdir}/pkgconfig/libvirt-admin.pc %{_libdir}/pkgconfig/libvirt-qemu.pc %{_libdir}/pkgconfig/libvirt-lxc.pc %dir %{_datadir}/libvirt/api/ %{_datadir}/libvirt/api/libvirt-api.xml %{_datadir}/libvirt/api/libvirt-admin-api.xml %{_datadir}/libvirt/api/libvirt-qemu-api.xml %{_datadir}/libvirt/api/libvirt-lxc-api.xml %if %{with_mingw} %files -n mingw32-libvirt %dir %{mingw32_sysconfdir}/libvirt/ %config(noreplace) %{mingw32_sysconfdir}/libvirt/libvirt.conf %config(noreplace) %{mingw32_sysconfdir}/libvirt/libvirt-admin.conf %{mingw32_bindir}/libvirt-0.dll %{mingw32_bindir}/virsh.exe %{mingw32_bindir}/virt-admin.exe %{mingw32_bindir}/virt-xml-validate %{mingw32_bindir}/virt-pki-query-dn.exe %{mingw32_bindir}/virt-pki-validate %{mingw32_bindir}/libvirt-lxc-0.dll %{mingw32_bindir}/libvirt-qemu-0.dll %{mingw32_bindir}/libvirt-admin-0.dll %{mingw32_libdir}/libvirt.dll.a %{mingw32_libdir}/pkgconfig/libvirt.pc %{mingw32_libdir}/pkgconfig/libvirt-qemu.pc %{mingw32_libdir}/pkgconfig/libvirt-lxc.pc %{mingw32_libdir}/pkgconfig/libvirt-admin.pc %{mingw32_libdir}/libvirt-lxc.dll.a %{mingw32_libdir}/libvirt-qemu.dll.a %{mingw32_libdir}/libvirt-admin.dll.a %dir %{mingw32_datadir}/libvirt/ %dir %{mingw32_datadir}/libvirt/schemas/ %{mingw32_datadir}/libvirt/schemas/*.rng %dir %{mingw32_datadir}/libvirt/api/ %{mingw32_datadir}/libvirt/api/libvirt-api.xml %{mingw32_datadir}/libvirt/api/libvirt-lxc-api.xml %{mingw32_datadir}/libvirt/api/libvirt-qemu-api.xml %{mingw32_datadir}/libvirt/api/libvirt-admin-api.xml %{mingw32_datadir}/libvirt/cpu_map/*.xml %{mingw32_datadir}/libvirt/test-screenshot.png %{mingw32_datadir}/locale/*/LC_MESSAGES/libvirt.mo %dir %{mingw32_includedir}/libvirt %{mingw32_includedir}/libvirt/libvirt.h %{mingw32_includedir}/libvirt/libvirt-common.h %{mingw32_includedir}/libvirt/libvirt-domain.h %{mingw32_includedir}/libvirt/libvirt-domain-checkpoint.h %{mingw32_includedir}/libvirt/libvirt-domain-snapshot.h %{mingw32_includedir}/libvirt/libvirt-event.h %{mingw32_includedir}/libvirt/libvirt-host.h %{mingw32_includedir}/libvirt/libvirt-interface.h %{mingw32_includedir}/libvirt/libvirt-network.h %{mingw32_includedir}/libvirt/libvirt-nodedev.h %{mingw32_includedir}/libvirt/libvirt-nwfilter.h %{mingw32_includedir}/libvirt/libvirt-secret.h %{mingw32_includedir}/libvirt/libvirt-storage.h %{mingw32_includedir}/libvirt/libvirt-stream.h %{mingw32_includedir}/libvirt/virterror.h %{mingw32_includedir}/libvirt/libvirt-lxc.h %{mingw32_includedir}/libvirt/libvirt-qemu.h %{mingw32_includedir}/libvirt/libvirt-admin.h %{mingw32_mandir}/man1/virsh.1* %{mingw32_mandir}/man1/virt-admin.1* %{mingw32_mandir}/man1/virt-xml-validate.1* %{mingw32_mandir}/man1/virt-pki-query-dn.1* %{mingw32_mandir}/man1/virt-pki-validate.1* %{mingw32_mandir}/man7/virkey*.7* %files -n mingw64-libvirt %dir %{mingw64_sysconfdir}/libvirt/ %config(noreplace) %{mingw64_sysconfdir}/libvirt/libvirt.conf %config(noreplace) %{mingw64_sysconfdir}/libvirt/libvirt-admin.conf %{mingw64_bindir}/libvirt-0.dll %{mingw64_bindir}/virsh.exe %{mingw64_bindir}/virt-admin.exe %{mingw64_bindir}/virt-xml-validate %{mingw64_bindir}/virt-pki-query-dn.exe %{mingw64_bindir}/virt-pki-validate %{mingw64_bindir}/libvirt-lxc-0.dll %{mingw64_bindir}/libvirt-qemu-0.dll %{mingw64_bindir}/libvirt-admin-0.dll %{mingw64_libdir}/libvirt.dll.a %{mingw64_libdir}/pkgconfig/libvirt.pc %{mingw64_libdir}/pkgconfig/libvirt-qemu.pc %{mingw64_libdir}/pkgconfig/libvirt-lxc.pc %{mingw64_libdir}/pkgconfig/libvirt-admin.pc %{mingw64_libdir}/libvirt-lxc.dll.a %{mingw64_libdir}/libvirt-qemu.dll.a %{mingw64_libdir}/libvirt-admin.dll.a %dir %{mingw64_datadir}/libvirt/ %dir %{mingw64_datadir}/libvirt/schemas/ %{mingw64_datadir}/libvirt/schemas/*.rng %dir %{mingw64_datadir}/libvirt/api/ %{mingw64_datadir}/libvirt/api/libvirt-api.xml %{mingw64_datadir}/libvirt/api/libvirt-lxc-api.xml %{mingw64_datadir}/libvirt/api/libvirt-qemu-api.xml %{mingw64_datadir}/libvirt/api/libvirt-admin-api.xml %{mingw64_datadir}/libvirt/cpu_map/*.xml %{mingw64_datadir}/libvirt/test-screenshot.png %{mingw64_datadir}/locale/*/LC_MESSAGES/libvirt.mo %dir %{mingw64_includedir}/libvirt %{mingw64_includedir}/libvirt/libvirt.h %{mingw64_includedir}/libvirt/libvirt-common.h %{mingw64_includedir}/libvirt/libvirt-domain.h %{mingw64_includedir}/libvirt/libvirt-domain-checkpoint.h %{mingw64_includedir}/libvirt/libvirt-domain-snapshot.h %{mingw64_includedir}/libvirt/libvirt-event.h %{mingw64_includedir}/libvirt/libvirt-host.h %{mingw64_includedir}/libvirt/libvirt-interface.h %{mingw64_includedir}/libvirt/libvirt-network.h %{mingw64_includedir}/libvirt/libvirt-nodedev.h %{mingw64_includedir}/libvirt/libvirt-nwfilter.h %{mingw64_includedir}/libvirt/libvirt-secret.h %{mingw64_includedir}/libvirt/libvirt-storage.h %{mingw64_includedir}/libvirt/libvirt-stream.h %{mingw64_includedir}/libvirt/virterror.h %{mingw64_includedir}/libvirt/libvirt-lxc.h %{mingw64_includedir}/libvirt/libvirt-qemu.h %{mingw64_includedir}/libvirt/libvirt-admin.h %{mingw64_mandir}/man1/virsh.1* %{mingw64_mandir}/man1/virt-admin.1* %{mingw64_mandir}/man1/virt-xml-validate.1* %{mingw64_mandir}/man1/virt-pki-query-dn.1* %{mingw64_mandir}/man1/virt-pki-validate.1* %{mingw64_mandir}/man7/virkey*.7* %endif %changelog