# translation of libvirt.HEAD.po to Korean # Copyright (C) 2006, 2007, 2009 Free Software Foundation, Inc. # This file is distributed under the same license as the PACKAGE package. # # Eunju Kim , 2006, 2007, 2009. msgid "" msgstr "" "Project-Id-Version: libvirt.HEAD\n" "Report-Msgid-Bugs-To: libvir-list@redhat.com\n" "POT-Creation-Date: 2010-02-03 17:57+0100\n" "PO-Revision-Date: 2009-09-10 16:28+1000\n" "Last-Translator: Eunju Kim \n" "Language-Team: Korean \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=1; plural=0;\n" #: daemon/dispatch.c:375 #, c-format msgid "program mismatch (actual %x, expected %x)" msgstr "프로그램 불일치 (실제 %x, 기대값 %x) " #: daemon/dispatch.c:381 #, c-format msgid "version mismatch (actual %x, expected %x)" msgstr "버전 불일치 (실제 %x, 기대값 %x) " #: daemon/dispatch.c:401 #, c-format msgid "type (%d) != REMOTE_CALL" msgstr "유형 (%d) != REMOTE_CALL " #: daemon/dispatch.c:449 #, c-format msgid "status (%d) != REMOTE_OK" msgstr "상태 (%d) != REMOTE_OK " #: daemon/dispatch.c:467 msgid "authentication required" msgstr "인증이 필요합니다 " #: daemon/dispatch.c:475 #, c-format msgid "unknown procedure: %d" msgstr "알려지지 않은 절차: %d " #: daemon/dispatch.c:487 msgid "parse args failed" msgstr "args 구문 분석 실패 " #: daemon/libvirtd.c:269 #, c-format msgid "Cannot access %s '%s': %s" msgstr "%s '%s' 액세스할 수 없음: %s " #: daemon/libvirtd.c:286 #, c-format msgid "gnutls_certificate_allocate_credentials: %s" msgstr "gnutls_certificate_allocate_credentials: %s" #: daemon/libvirtd.c:299 #, c-format msgid "gnutls_certificate_set_x509_trust_file: %s" msgstr "gnutls_certificate_set_x509_trust_file: %s" #: daemon/libvirtd.c:313 #, c-format msgid "gnutls_certificate_set_x509_crl_file: %s" msgstr "gnutls_certificate_set_x509_crl_file: %s" #: daemon/libvirtd.c:330 #, c-format msgid "gnutls_certificate_set_x509_key_file: %s" msgstr "gnutls_certificate_set_x509_key_file: %s" #: daemon/libvirtd.c:343 #, c-format msgid "gnutls_dh_params_init: %s" msgstr "gnutls_dh_params_init: %s" #: daemon/libvirtd.c:348 #, c-format msgid "gnutls_dh_params_generate2: %s" msgstr "gnutls_dh_params_generate2: %s" #: daemon/libvirtd.c:369 #, c-format msgid "Failed to read from signal pipe: %s" msgstr "신호 파이프에서 읽기 실패: %s " #: daemon/libvirtd.c:377 msgid "Reloading configuration on SIGHUP" msgstr "SIGHUP에서의 설정을 다시 불러오는 중 " #: daemon/libvirtd.c:379 msgid "Error while reloading drivers" msgstr "드라이버를 다시 불러오는 도중 오류 발생 " #: daemon/libvirtd.c:385 #, c-format msgid "Shutting down on signal %d" msgstr "%d 신호에서 종료 중 " #: daemon/libvirtd.c:390 #, c-format msgid "Received unexpected signal %d" msgstr "예상외의 신호 %d 수신 " #: daemon/libvirtd.c:493 #, c-format msgid "Failed to open pid file '%s' : %s" msgstr "'%s' pid 파일 열기 실패: %s " #: daemon/libvirtd.c:499 #, c-format msgid "Failed to fdopen pid file '%s' : %s" msgstr "'%s' pid 파일 fdopen하기 실패: %s " #: daemon/libvirtd.c:506 #, c-format msgid "Failed to write to pid file '%s' : %s" msgstr "'%s' pid 파일 쓰기 실패 : %s " #: daemon/libvirtd.c:513 #, c-format msgid "Failed to close pid file '%s' : %s" msgstr "'%s' pid 파일 닫기 실패 : %s " #: daemon/libvirtd.c:530 msgid "Failed to allocate memory for struct qemud_socket" msgstr "struct qemud_socket에 대한 메모리 할당 실패 " #: daemon/libvirtd.c:540 #, c-format msgid "Failed to create socket: %s" msgstr "소켓 생성 실패: %s " #: daemon/libvirtd.c:552 #, c-format msgid "Path %s too long for unix socket" msgstr "" #: daemon/libvirtd.c:564 #, c-format msgid "Failed to bind socket to '%s': %s" msgstr "소켓을 '%s'로 바인드하기 실패: %s " #: daemon/libvirtd.c:573 #, c-format msgid "Failed to listen for connections on '%s': %s" msgstr "'%s'로의 연결을 청취하는데 실패: %s " #: daemon/libvirtd.c:603 #, fuzzy, c-format msgid "getaddrinfo: %s" msgstr "getaddrinfo: %s\n" #: daemon/libvirtd.c:613 #, c-format msgid "socket: %s" msgstr "소켓: %s " #: daemon/libvirtd.c:637 #, c-format msgid "bind: %s" msgstr "바인드: %s " #: daemon/libvirtd.c:682 #, c-format msgid "remoteListenTCP: calloc: %s" msgstr "remoteListenTCP: calloc: %s" #: daemon/libvirtd.c:713 #, c-format msgid "remoteListenTCP: listen: %s" msgstr "remoteListenTCP: listen: %s" #: daemon/libvirtd.c:742 #, fuzzy, c-format msgid "Failed to change group ownership of %s" msgstr "도메인 %s를 %s에 코어 덤프하기 실패" #: daemon/libvirtd.c:805 msgid "Resulting path too long for buffer in qemudInitPaths()" msgstr "결과에서 나타나는 경로는 qemudInitPaths()의 버퍼에 너무 깁니다 " #: daemon/libvirtd.c:823 msgid "Failed to allocate struct qemud_server" msgstr "struct qemud_server 할당 실패 " #: daemon/libvirtd.c:831 daemon/libvirtd.c:1329 src/conf/domain_conf.c:709 #: src/conf/interface_conf.c:1327 src/conf/network_conf.c:175 #: src/conf/node_device_conf.c:196 src/conf/storage_conf.c:1465 #: src/openvz/openvz_conf.c:465 src/qemu/qemu_driver.c:993 #: src/remote/remote_driver.c:978 src/remote/remote_driver.c:7171 #: src/remote/remote_driver.c:7350 src/remote/remote_driver.c:7562 #: src/test/test_driver.c:509 src/test/test_driver.c:754 msgid "cannot initialize mutex" msgstr "mutex를 초기화할 수 없음 " #: daemon/libvirtd.c:836 msgid "cannot initialize condition variable" msgstr "상태 변수를 초기화할 수 없음 " #: daemon/libvirtd.c:843 msgid "Failed to initialize event system" msgstr "이벤트 시스템 초기화하기 실패 " #: daemon/libvirtd.c:936 #, c-format msgid "Failed to initialize SASL authentication %s" msgstr "SASL 인증 %s 초기화 실패 " #: daemon/libvirtd.c:954 #, c-format msgid "Failed to connect to system bus for PolicyKit auth: %s" msgstr "PolicyKit auth에 대한 시스템 버스로 연결하기 실패: %s " #: daemon/libvirtd.c:1041 msgid "Failed to add server event callback" msgstr "서버 이벤트 콜백 추가 실패 " #: daemon/libvirtd.c:1077 #, c-format msgid "remoteInitializeTLSSession: %s" msgstr "remoteInitializeTLSSession: %s" #: daemon/libvirtd.c:1093 #, c-format msgid "remoteCheckDN: gnutls_x509_cert_get_dn: %s" msgstr "remoteCheckDN: gnutls_x509_cert_get_dn: %s" #: daemon/libvirtd.c:1110 #, c-format msgid "remoteCheckDN: failed: client DN is %s" msgstr "remoteCheckDN: 실패: 클라이언트 DN은 %s " #: daemon/libvirtd.c:1125 #, c-format msgid "remoteCheckCertificate: verify failed: %s" msgstr "remoteCheckCertificate: 확인 실패: %s " #: daemon/libvirtd.c:1132 msgid "remoteCheckCertificate: the client certificate is not trusted." msgstr "remoteCheckCertificate: 클라이언트 인증서를 신뢰할 수 없음. " #: daemon/libvirtd.c:1136 msgid "remoteCheckCertificate: the client certificate has unknown issuer." msgstr "remoteCheckCertificate: 클라이언트 인증서의 발행자를 알 수 없음. " #: daemon/libvirtd.c:1140 msgid "remoteCheckCertificate: the client certificate has been revoked." msgstr "remoteCheckCertificate: 클라이언트 인증서가 취소됨. " #: daemon/libvirtd.c:1145 msgid "" "remoteCheckCertificate: the client certificate uses an insecure algorithm." msgstr "" "remoteCheckCertificate: 클라이언트 인증서가 안전하지 않은 알고리즘을 사용 " #: daemon/libvirtd.c:1153 msgid "remoteCheckCertificate: certificate is not X.509" msgstr "remoteCheckCertificate: 인증서가 X.509가 아님 " #: daemon/libvirtd.c:1158 msgid "remoteCheckCertificate: no peers" msgstr "" #: daemon/libvirtd.c:1168 msgid "remoteCheckCertificate: gnutls_x509_crt_init failed" msgstr "remoteCheckCertificate: gnutls_x509_crt_init 실패 " #: daemon/libvirtd.c:1178 msgid "remoteCheckCertificate: the client certificate has expired" msgstr "remoteCheckCertificate: 클라이언트 인증서가 만료됨 " #: daemon/libvirtd.c:1185 msgid "remoteCheckCertificate: the client certificate is not yet activated" msgstr "remoteCheckCertificate: 클라이언트 인증서가 활성화되지 않음 " #: daemon/libvirtd.c:1194 msgid "" "remoteCheckCertificate: client's Distinguished Name is not on the list of " "allowed clients (tls_allowed_dn_list). Use 'openssl x509 -in clientcert.pem " "-text' to view the Distinguished Name field in the client certificate, or " "run this daemon with --verbose option." msgstr "" #: daemon/libvirtd.c:1212 msgid "remoteCheckCertificate: failed to verify client's certificate" msgstr "remoteCheckCertificate: 클라이언트 인증서 확인 실패 " #: daemon/libvirtd.c:1215 msgid "" "remoteCheckCertificate: tls_no_verify_certificate is set so the bad " "certificate is ignored" msgstr "" #: daemon/libvirtd.c:1221 msgid "client had unexpected data pending tx after access check" msgstr "" #: daemon/libvirtd.c:1249 #, c-format msgid "Failed to verify client credentials: %s" msgstr "클라이언트 인증서 확인 실패: %s " #: daemon/libvirtd.c:1276 #, c-format msgid "Failed to accept connection: %s" msgstr "연결 허용 실패 %s " #: daemon/libvirtd.c:1282 #, c-format msgid "Too many active clients (%d), dropping connection" msgstr "" #: daemon/libvirtd.c:1288 msgid "Out of memory allocating clients" msgstr "클라이언트 할당 메모리 부족 " #: daemon/libvirtd.c:1362 #, c-format msgid "Turn off polkit auth for privileged client %d" msgstr "" #: daemon/libvirtd.c:1401 daemon/libvirtd.c:2029 #, fuzzy, c-format msgid "TLS handshake failed: %s" msgstr "GET 작업 실패: %s" #: daemon/libvirtd.c:1580 daemon/libvirtd.c:1830 #, c-format msgid "unexpected negative length request %lld" msgstr "" #: daemon/libvirtd.c:1596 #, c-format msgid "read: %s" msgstr "읽기: %s " #: daemon/libvirtd.c:1609 #, c-format msgid "gnutls_record_recv: %s" msgstr "gnutls_record_recv: %s" #: daemon/libvirtd.c:1671 #, c-format msgid "failed to decode SASL data %s" msgstr "SASL 데이터 %s 해독 실패 " #: daemon/libvirtd.c:1841 #, c-format msgid "write: %s" msgstr "쓰기: %s " #: daemon/libvirtd.c:1852 #, c-format msgid "gnutls_record_send: %s" msgstr "gnutls_record_send: %s" #: daemon/libvirtd.c:1901 #, c-format msgid "failed to encode SASL data %s" msgstr "SASL 데이터 %s 인코딩하기 실패 " #: daemon/libvirtd.c:2177 #, c-format msgid "Signal handler reported %d errors: last error: %s" msgstr "" #: daemon/libvirtd.c:2236 #, fuzzy msgid "Failed to register shutdown timeout" msgstr "도메인 %s를 종료하기 실패" #: daemon/libvirtd.c:2245 #, fuzzy msgid "Failed to allocate workers" msgstr "메모리 할당 실패" #: daemon/libvirtd.c:2429 daemon/libvirtd.c:2448 #, c-format msgid "failed to allocate memory for %s config list" msgstr "%s 설정 목록에 대한 메모리 할당 실패 " #: daemon/libvirtd.c:2435 daemon/libvirtd.c:2465 #, c-format msgid "failed to allocate memory for %s config list value" msgstr "%s 설정 목록 값에 대한 메모리 할당 실패 " #: daemon/libvirtd.c:2453 daemon/libvirtd.c:2476 #, c-format msgid "remoteReadConfigFile: %s: %s: must be a string or list of strings\n" msgstr "" #: daemon/libvirtd.c:2492 #, c-format msgid "remoteReadConfigFile: %s: %s: invalid type: got %s; expected %s\n" msgstr "" #: daemon/libvirtd.c:2514 #, c-format msgid "remoteReadConfigFile: %s" msgstr "" #: daemon/libvirtd.c:2557 #, c-format msgid "remoteReadConfigFile: %s: %s: unsupported auth %s" msgstr "" #: daemon/libvirtd.c:2721 msgid "Cannot set group when not running as root" msgstr "" #: daemon/libvirtd.c:2731 #, fuzzy msgid "Failed to allocate memory for buffer" msgstr "메모리 할당 실패" #: daemon/libvirtd.c:2740 #, fuzzy msgid "Failed to reallocate enough memory for buffer" msgstr "메모리 할당 실패" #: daemon/libvirtd.c:2746 #, fuzzy, c-format msgid "Failed to lookup group '%s'" msgstr "'%s' 열기 실패: %s" #: daemon/libvirtd.c:2758 daemon/libvirtd.c:2767 #, fuzzy, c-format msgid "Failed to parse mode '%s'" msgstr "'%s' 열기 실패: %s" #: daemon/libvirtd.c:2842 msgid "additional privileges are required" msgstr "" #: daemon/libvirtd.c:2848 #, fuzzy msgid "failed to set reduced privileges" msgstr "기능 전환 실패" #: daemon/libvirtd.c:2881 #, fuzzy, c-format msgid "Failed to create pipe: %s" msgstr "XML 생성하기 실패" #: daemon/libvirtd.c:2903 msgid "Failed to register callback for signal pipe" msgstr "" #: daemon/libvirtd.c:3059 #, fuzzy, c-format msgid "Failed to fork as daemon: %s" msgstr "도메인 %s를 다시 시작하기 실패" #: daemon/libvirtd.c:3086 #, fuzzy, c-format msgid "unable to create rundir %s: %s" msgstr "XML 생성하기 실패" #: daemon/remote.c:142 msgid "connection already open" msgstr "" #: daemon/remote.c:173 #, fuzzy msgid "connection not open" msgstr "잘못된 연결 포인터" #: daemon/remote.c:407 msgid "maxCells > REMOTE_NODE_MAX_CELLS" msgstr "maxCells > REMOTE_NODE_MAX_CELLS" #: daemon/remote.c:501 daemon/remote.c:585 msgid "nparams too large" msgstr "" #: daemon/remote.c:550 #, fuzzy msgid "unknown type" msgstr "알려지지 않은 OS 유형" #: daemon/remote.c:596 #, fuzzy, c-format msgid "Field %s too big for destination" msgstr "노드 정보 보기 실패" #: daemon/remote.c:725 #, fuzzy msgid "maxStats > REMOTE_DOMAIN_MEMORY_STATS_MAX" msgstr "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" #: daemon/remote.c:794 daemon/remote.c:843 msgid "size > maximum buffer size" msgstr "크기 > 최대 버퍼 크기 " #: daemon/remote.c:1325 msgid "maxinfo > REMOTE_VCPUINFO_MAX" msgstr "maxinfo > REMOTE_VCPUINFO_MAX" #: daemon/remote.c:1331 msgid "maxinfo * maplen > REMOTE_CPUMAPS_MAX" msgstr "maxinfo * maplen > REMOTE_CPUMAPS_MAX" #: daemon/remote.c:1621 msgid "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" msgstr "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" #: daemon/remote.c:1748 msgid "cpumap_len > REMOTE_CPUMAP_MAX" msgstr "cpumap_len > REMOTE_CPUMAP_MAX" #: daemon/remote.c:2080 daemon/remote.c:2147 daemon/remote.c:3542 msgid "maxnames > REMOTE_NETWORK_NAME_LIST_MAX" msgstr "maxnames > REMOTE_NETWORK_NAME_LIST_MAX" #: daemon/remote.c:2114 msgid "maxids > REMOTE_DOMAIN_ID_LIST_MAX" msgstr "maxids > REMOTE_DOMAIN_ID_LIST_MAX" #: daemon/remote.c:2533 msgid "maxnames > REMOTE_INTERFACE_NAME_LIST_MAX" msgstr "maxnames > REMOTE_INTERFACE_NAME_LIST_MAX" #: daemon/remote.c:2586 msgid "maxnames > REMOTE_DEFINED_INTERFACE_NAME_LIST_MAX" msgstr "maxnames > REMOTE_DEFINED_INTERFACE_NAME_LIST_MAX" #: daemon/remote.c:2821 src/remote/remote_driver.c:6108 #, c-format msgid "Cannot resolve address %d: %s" msgstr "" #: daemon/remote.c:2864 msgid "client tried invalid SASL init request" msgstr "" #: daemon/remote.c:2873 #, fuzzy, c-format msgid "failed to get sock address: %s" msgstr "%s %s 블럭 상태 보기 실패" #: daemon/remote.c:2885 #, fuzzy, c-format msgid "failed to get peer address: %s" msgstr "'%s' 네트워크 보기 실패" #: daemon/remote.c:2906 #, c-format msgid "sasl context setup failed %d (%s)" msgstr "" #: daemon/remote.c:2919 msgid "cannot get TLS cipher size" msgstr "" #: daemon/remote.c:2928 #, c-format msgid "cannot set SASL external SSF %d (%s)" msgstr "" #: daemon/remote.c:2956 #, c-format msgid "cannot set SASL security props %d (%s)" msgstr "" #: daemon/remote.c:2972 #, c-format msgid "cannot list SASL mechanisms %d (%s)" msgstr "" #: daemon/remote.c:2981 msgid "cannot allocate mechlist" msgstr "" #: daemon/remote.c:3012 src/remote/remote_driver.c:6601 #, c-format msgid "cannot query SASL ssf on connection %d (%s)" msgstr "" #: daemon/remote.c:3022 #, c-format msgid "negotiated SSF %d was not strong enough" msgstr "" #: daemon/remote.c:3051 #, c-format msgid "cannot query SASL username on connection %d (%s)" msgstr "" #: daemon/remote.c:3059 msgid "no client username was found" msgstr "" #: daemon/remote.c:3069 #, fuzzy msgid "out of memory copying username" msgstr "메모리 부족" #: daemon/remote.c:3088 #, c-format msgid "SASL client %s not allowed in whitelist" msgstr "" #: daemon/remote.c:3119 daemon/remote.c:3207 msgid "client tried invalid SASL start request" msgstr "" #: daemon/remote.c:3134 #, c-format msgid "sasl start failed %d (%s)" msgstr "" #: daemon/remote.c:3141 #, c-format msgid "sasl start reply data too long %d" msgstr "" #: daemon/remote.c:3221 #, c-format msgid "sasl step failed %d (%s)" msgstr "" #: daemon/remote.c:3229 #, c-format msgid "sasl step reply data too long %d" msgstr "" #: daemon/remote.c:3286 msgid "client tried unsupported SASL init request" msgstr "" #: daemon/remote.c:3300 msgid "client tried unsupported SASL start request" msgstr "" #: daemon/remote.c:3314 msgid "client tried unsupported SASL step request" msgstr "" #: daemon/remote.c:3356 daemon/remote.c:3425 msgid "client tried invalid PolicyKit init request" msgstr "" #: daemon/remote.c:3361 daemon/remote.c:3430 msgid "cannot get peer socket identity" msgstr "" #: daemon/remote.c:3365 daemon/remote.c:3434 #, c-format msgid "Checking PID %d running as %d" msgstr "" #: daemon/remote.c:3369 #, c-format msgid "Caller PID was too large %d" msgstr "" #: daemon/remote.c:3374 #, c-format msgid "Cannot invoke %s" msgstr "" #: daemon/remote.c:3378 #, c-format msgid "Policy kit denied action %s from pid %d, uid %d, result: %d" msgstr "" #: daemon/remote.c:3382 #, c-format msgid "Policy allowed action %s from pid %d, uid %d" msgstr "" #: daemon/remote.c:3438 #, c-format msgid "Failed to lookup policy kit caller: %s" msgstr "" #: daemon/remote.c:3445 #, fuzzy, c-format msgid "Failed to create polkit action %s" msgstr "비활성화 도메인 %s 생성 실패\n" #: daemon/remote.c:3455 #, fuzzy, c-format msgid "Failed to create polkit context %s" msgstr "비활성화 도메인 %s 생성 실패\n" #: daemon/remote.c:3473 #, c-format msgid "Policy kit failed to check authorization %d %s" msgstr "" #: daemon/remote.c:3487 #, c-format msgid "Policy kit denied action %s from pid %d, uid %d, result: %s" msgstr "" #: daemon/remote.c:3492 #, c-format msgid "Policy allowed action %s from pid %d, uid %d, result %s" msgstr "" #: daemon/remote.c:3518 msgid "client tried unsupported PolicyKit init request" msgstr "" #: daemon/remote.c:3576 msgid "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX" msgstr "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX" #: daemon/remote.c:4062 msgid "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX" msgstr "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX" #: daemon/remote.c:4429 daemon/remote.c:4600 msgid "maxnames > REMOTE_NODE_DEVICE_NAME_LIST_MAX" msgstr "maxnames > REMOTE_NODE_DEVICE_NAME_LIST_MAX" #: daemon/remote.c:4893 #, fuzzy msgid "maxuuids > REMOTE_SECRET_UUID_LIST_MAX" msgstr "maxids > REMOTE_DOMAIN_ID_LIST_MAX" #: daemon/stream.c:113 msgid "stream had unexpected termination" msgstr "" #: daemon/stream.c:115 msgid "stream had I/O failure" msgstr "" #: daemon/stream.c:468 msgid "stream aborted at client request" msgstr "" #: daemon/stream.c:471 #, c-format msgid "stream aborted with unexpected status %d" msgstr "" #: src/conf/cpu_conf.c:101 #, fuzzy msgid "Missing match attribute for CPU specification" msgstr "장치의 소스 정보 부재" #: src/conf/cpu_conf.c:111 msgid "Invalid match attribute for CPU specification" msgstr "" #: src/conf/cpu_conf.c:121 msgid "Missing CPU architecture" msgstr "" #: src/conf/cpu_conf.c:129 src/cpu/cpu_x86.c:651 msgid "Missing CPU model name" msgstr "" #: src/conf/cpu_conf.c:141 msgid "Missing 'sockets' attribute in CPU topology" msgstr "" #: src/conf/cpu_conf.c:150 msgid "Missing 'cores' attribute in CPU topology" msgstr "" #: src/conf/cpu_conf.c:159 msgid "Missing 'threads' attribute in CPU topology" msgstr "" #: src/conf/cpu_conf.c:166 msgid "Invalid CPU topology" msgstr "" #: src/conf/cpu_conf.c:178 src/conf/cpu_conf.c:288 msgid "Non-empty feature list specified without CPU model" msgstr "" #: src/conf/cpu_conf.c:201 #, fuzzy msgid "Invalid CPU feature policy" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: src/conf/cpu_conf.c:211 #, fuzzy msgid "Invalid CPU feature name" msgstr "잘못된 도메인 포인터" #: src/conf/cpu_conf.c:218 src/conf/cpu_conf.c:366 #, c-format msgid "CPU feature `%s' specified more than once" msgstr "" #: src/conf/cpu_conf.c:297 #, fuzzy, c-format msgid "Unexpected CPU match policy %d" msgstr "예상외의 값 노드" #: src/conf/cpu_conf.c:326 src/cpu/cpu_x86.c:338 #, fuzzy msgid "Missing CPU feature name" msgstr "부재 \"" #: src/conf/cpu_conf.c:336 #, fuzzy, c-format msgid "Unexpected CPU feature policy %d" msgstr "예상외의 값 노드" #: src/conf/domain_conf.c:914 #, fuzzy msgid "missing device information" msgstr "장치 정보 부재" #: src/conf/domain_conf.c:948 #, fuzzy, c-format msgid "unknown address type '%d'" msgstr "알 수 없는 디스크 유형 '%s' " #: src/conf/domain_conf.c:1003 #, fuzzy msgid "Cannot parse
'domain' attribute" msgstr "잘못된 MAC 주소: %s" #: src/conf/domain_conf.c:1010 src/conf/domain_conf.c:1069 #, fuzzy msgid "Cannot parse
'bus' attribute" msgstr "잘못된 MAC 주소: %s" #: src/conf/domain_conf.c:1017 #, fuzzy msgid "Cannot parse
'slot' attribute" msgstr "잘못된 MAC 주소: %s" #: src/conf/domain_conf.c:1024 #, fuzzy msgid "Cannot parse
'function' attribute" msgstr "%s에 연결할 수 없음" #: src/conf/domain_conf.c:1030 msgid "Insufficient specification for PCI address" msgstr "" #: src/conf/domain_conf.c:1062 msgid "Cannot parse
'controller' attribute" msgstr "" #: src/conf/domain_conf.c:1076 #, fuzzy msgid "Cannot parse
'unit' attribute" msgstr "잘못된 MAC 주소: %s" #: src/conf/domain_conf.c:1082 msgid "Insufficient specification for drive address" msgstr "" #: src/conf/domain_conf.c:1138 #, fuzzy, c-format msgid "unknown address type '%s'" msgstr "알 수 없는 디스크 유형 '%s' " #: src/conf/domain_conf.c:1143 msgid "No type specified for device address" msgstr "" #: src/conf/domain_conf.c:1161 #, fuzzy msgid "Unknown device address type" msgstr "알려지지 않은 장치 유형 " #: src/conf/domain_conf.c:1244 #, c-format msgid "unknown disk type '%s'" msgstr "알 수 없는 디스크 유형 '%s' " #: src/conf/domain_conf.c:1269 src/conf/domain_conf.c:4619 #, fuzzy, c-format msgid "unexpected disk type %s" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:1322 #, c-format msgid "unknown disk device '%s'" msgstr "알려지지 않은 디스크 장치 '%s' " #: src/conf/domain_conf.c:1348 #, c-format msgid "Invalid floppy device name: %s" msgstr "유효하지 않은 플로피 장치 이름: %s " #: src/conf/domain_conf.c:1363 #, c-format msgid "Invalid harddisk device name: %s" msgstr "유효하지 않은 하드 디스크 장치 이름: %s " #: src/conf/domain_conf.c:1370 #, c-format msgid "unknown disk bus type '%s'" msgstr "알려지지 않은 디스크 버스 유형 '%s' " #: src/conf/domain_conf.c:1395 #, c-format msgid "Invalid bus type '%s' for floppy disk" msgstr "플로피 디스크 용으로 유효하지 않은 버스 유형 '%s' " #: src/conf/domain_conf.c:1401 #, c-format msgid "Invalid bus type '%s' for disk" msgstr "디스크 용으로 유효하지 않은 버스 유형 '%s' " #: src/conf/domain_conf.c:1408 #, c-format msgid "unknown disk cache mode '%s'" msgstr "알려지지 않은 디스크 캐시 모드 '%s' " #: src/conf/domain_conf.c:1418 src/conf/domain_conf.c:1726 #: src/conf/domain_conf.c:2904 #, c-format msgid "Unable to parse devaddr parameter '%s'" msgstr "" #: src/conf/domain_conf.c:1487 #, fuzzy, c-format msgid "unknown disk controller type '%s'" msgstr "알 수 없는 디스크 유형 '%s' " #: src/conf/domain_conf.c:1496 #, fuzzy, c-format msgid "cannot parse disk controller index %s" msgstr "장치 %s을(를) 구문 분석할 수 없음 " #: src/conf/domain_conf.c:1507 msgid "Disk controllers must use the 'pci' address type" msgstr "" #: src/conf/domain_conf.c:1545 #, c-format msgid "unknown filesystem type '%s'" msgstr "알려지지 않은 파일 시스템 유형 '%s' " #: src/conf/domain_conf.c:1644 #, c-format msgid "unknown interface type '%s'" msgstr "알려지지 않은 인터페이스 유형 '%s' " #: src/conf/domain_conf.c:1712 src/qemu/qemu_conf.c:4681 #, fuzzy, c-format msgid "unable to parse mac address '%s'" msgstr "'%s' 열기 실패: %s" #: src/conf/domain_conf.c:1741 #, fuzzy msgid "Network interfaces must use 'pci' address type" msgstr "네트워크 인터페이스 유형" #: src/conf/domain_conf.c:1749 msgid "" "No 'network' attribute specified with " msgstr "" #: src/conf/domain_conf.c:1775 msgid "" "No 'bridge' attribute specified with " msgstr "" #: src/conf/domain_conf.c:1795 msgid "No 'port' attribute specified with socket interface" msgstr "" #: src/conf/domain_conf.c:1800 msgid "Cannot parse 'port' attribute with socket interface" msgstr "" #: src/conf/domain_conf.c:1808 msgid "No 'address' attribute specified with socket interface" msgstr "" #: src/conf/domain_conf.c:1820 msgid "" "No 'name' attribute specified with " msgstr "" #: src/conf/domain_conf.c:1844 msgid "Model name contains invalid characters" msgstr "" #: src/conf/domain_conf.c:1948 src/conf/domain_conf.c:2014 #, c-format msgid "unknown target type for character device: %s" msgstr "" #: src/conf/domain_conf.c:1989 #, c-format msgid "Unknown source mode '%s'" msgstr "알려지지 않은 소스 모드 '%s' " #: src/conf/domain_conf.c:2006 msgid "character device target does not define a type" msgstr "" #: src/conf/domain_conf.c:2035 src/conf/domain_conf.c:2078 #, fuzzy, c-format msgid "Invalid port number: %s" msgstr "%s에 있는 잘못된 인수" #: src/conf/domain_conf.c:2047 msgid "guestfwd channel does not define a target address" msgstr "" #: src/conf/domain_conf.c:2058 #, fuzzy, c-format msgid "%s is not a valid address" msgstr "잘못된 MAC 주소" #: src/conf/domain_conf.c:2065 msgid "guestfwd channel only supports IPv4 addresses" msgstr "" #: src/conf/domain_conf.c:2072 msgid "guestfwd channel does not define a target port" msgstr "" #: src/conf/domain_conf.c:2087 #, fuzzy, c-format msgid "unexpected target type type %u" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:2111 src/conf/domain_conf.c:2195 #, fuzzy msgid "Missing source path attribute for char device" msgstr "장치의 소스 정보 부재" #: src/conf/domain_conf.c:2128 src/conf/domain_conf.c:2145 #, fuzzy msgid "Missing source host attribute for char device" msgstr "장치의 소스 정보 부재" #: src/conf/domain_conf.c:2133 src/conf/domain_conf.c:2150 #: src/conf/domain_conf.c:2177 #, fuzzy msgid "Missing source service attribute for char device" msgstr "장치의 소스 정보 부재" #: src/conf/domain_conf.c:2168 #, c-format msgid "Unknown protocol '%s'" msgstr "알려지지 않은 프로토콜 '%s' " #: src/conf/domain_conf.c:2254 #, fuzzy msgid "missing input device type" msgstr "대상 장치 유형" #: src/conf/domain_conf.c:2260 #, c-format msgid "unknown input device type '%s'" msgstr "알려지지 않은 입력 장치 유형 '%s' " #: src/conf/domain_conf.c:2267 #, c-format msgid "unknown input bus type '%s'" msgstr "알려지지 않은 입력 버스 유형 '%s' " #: src/conf/domain_conf.c:2275 #, c-format msgid "ps2 bus does not support %s input device" msgstr "ps2 버스는 %s 입력 장치를 지원하지 않음 " #: src/conf/domain_conf.c:2281 src/conf/domain_conf.c:2288 #, c-format msgid "unsupported input bus %s" msgstr "지원되지 않는 입력 버스 %s " #: src/conf/domain_conf.c:2293 #, c-format msgid "xen bus does not support %s input device" msgstr "xen 버스는 %s 입력 장치를 지원하지 않음 " #: src/conf/domain_conf.c:2341 msgid "missing graphics device type" msgstr "그래픽 장치 유형 부재 " #: src/conf/domain_conf.c:2347 #, c-format msgid "unknown graphics device type '%s'" msgstr "알려지지 않은 그래픽 장치 유형 '%s' " #: src/conf/domain_conf.c:2358 #, c-format msgid "cannot parse vnc port %s" msgstr "vnc 포트 %s을(를) 구문 분석할 수 없음 " #: src/conf/domain_conf.c:2396 src/conf/domain_conf.c:2458 #, fuzzy, c-format msgid "unknown fullscreen value '%s'" msgstr "알려지지 않은 명령: '%s'" #: src/conf/domain_conf.c:2414 #, c-format msgid "cannot parse rdp port %s" msgstr "" #: src/conf/domain_conf.c:2497 #, c-format msgid "unknown sound model '%s'" msgstr "알려지지 않은 사운드 모델: '%s' " #: src/conf/domain_conf.c:2534 msgid "watchdog must contain model name" msgstr "" #: src/conf/domain_conf.c:2540 #, fuzzy, c-format msgid "unknown watchdog model '%s'" msgstr "알려지지 않은 비디오 모델: '%s' " #: src/conf/domain_conf.c:2551 #, fuzzy, c-format msgid "unknown watchdog action '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/domain_conf.c:2705 #, c-format msgid "unknown video model '%s'" msgstr "알려지지 않은 비디오 모델: '%s' " #: src/conf/domain_conf.c:2711 msgid "missing video model and cannot determine default" msgstr "" #: src/conf/domain_conf.c:2719 #, c-format msgid "cannot parse video ram '%s'" msgstr "비디오 램 '%s'을 구문 분석할 수 없음 " #: src/conf/domain_conf.c:2729 #, c-format msgid "cannot parse video heads '%s'" msgstr "" #: src/conf/domain_conf.c:2779 #, c-format msgid "cannot parse vendor id %s" msgstr "" #: src/conf/domain_conf.c:2786 msgid "usb vendor needs id" msgstr "" #: src/conf/domain_conf.c:2797 #, c-format msgid "cannot parse product %s" msgstr "" #: src/conf/domain_conf.c:2805 msgid "usb product needs id" msgstr "" #: src/conf/domain_conf.c:2816 #, c-format msgid "cannot parse bus %s" msgstr "버스 %s을(를) 구문 분석할 수 없음 " #: src/conf/domain_conf.c:2823 msgid "usb address needs bus id" msgstr "" #: src/conf/domain_conf.c:2832 #, c-format msgid "cannot parse device %s" msgstr "장치 %s을(를) 구문 분석할 수 없음 " #: src/conf/domain_conf.c:2840 msgid "usb address needs device id" msgstr "" #: src/conf/domain_conf.c:2845 #, c-format msgid "unknown usb source type '%s'" msgstr "알려지지 않은 usb 소스 유형 '%s' " #: src/conf/domain_conf.c:2855 msgid "vendor cannot be 0." msgstr "" #: src/conf/domain_conf.c:2861 #, fuzzy msgid "missing vendor" msgstr "부재 \"" #: src/conf/domain_conf.c:2866 #, fuzzy msgid "missing product" msgstr "부재 \"" #: src/conf/domain_conf.c:2912 #, fuzzy, c-format msgid "unknown pci source type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/domain_conf.c:2945 #, fuzzy, c-format msgid "unknown hostdev mode '%s'" msgstr "알려지지 않은 호스트 %s" #: src/conf/domain_conf.c:2956 #, c-format msgid "unknown host device type '%s'" msgstr "알려지지 않은 호스트 장치 유형 '%s' " #: src/conf/domain_conf.c:2961 #, fuzzy msgid "missing type in hostdev" msgstr "장치의 대상 정보 부재" #: src/conf/domain_conf.c:2990 #, c-format msgid "unknown node %s" msgstr "알려지지 않은 노드 %s " #: src/conf/domain_conf.c:3007 msgid "PCI host devices must use 'pci' address type" msgstr "" #: src/conf/domain_conf.c:3039 #, c-format msgid "unknown lifecycle action %s" msgstr "" #: src/conf/domain_conf.c:3063 msgid "missing security type" msgstr "보안 유형 부재 " #: src/conf/domain_conf.c:3070 msgid "invalid security type" msgstr "유효하지 않은 보안 유형 " #: src/conf/domain_conf.c:3083 msgid "missing security model" msgstr "보안 모델 부재 " #: src/conf/domain_conf.c:3092 msgid "security label is missing" msgstr "" #: src/conf/domain_conf.c:3106 msgid "security imagelabel is missing" msgstr "" #: src/conf/domain_conf.c:3139 src/conf/domain_conf.c:4097 #: src/conf/domain_conf.c:4138 src/conf/domain_conf.c:4210 #: src/conf/interface_conf.c:908 src/conf/interface_conf.c:948 #: src/conf/network_conf.c:560 src/conf/network_conf.c:600 #: src/conf/node_device_conf.c:1302 src/conf/secret_conf.c:241 #: src/conf/storage_conf.c:805 src/conf/storage_conf.c:1215 #, fuzzy msgid "missing root element" msgstr "root 장치 정보 부재" #: src/conf/domain_conf.c:3187 msgid "unknown device type" msgstr "알려지지 않은 장치 유형 " #: src/conf/domain_conf.c:3321 msgid "unknown virt type" msgstr "알려지지 않은 virt 유형 " #: src/conf/domain_conf.c:3332 #, c-format msgid "no emulator for domain %s os type %s on architecture %s" msgstr "" #: src/conf/domain_conf.c:3367 #, fuzzy msgid "missing domain type attribute" msgstr "도메인 이름 정보 부재" #: src/conf/domain_conf.c:3373 #, fuzzy, c-format msgid "invalid domain type %s" msgstr "%s에 있는 잘못된 도메인 포인터" #: src/conf/domain_conf.c:3389 src/conf/network_conf.c:415 #: src/conf/secret_conf.c:165 #, fuzzy msgid "Failed to generate UUID" msgstr "네트워크 UUID 보기 실패" #: src/conf/domain_conf.c:3395 src/conf/network_conf.c:422 #: src/conf/secret_conf.c:171 src/conf/storage_conf.c:660 msgid "malformed uuid element" msgstr "" #: src/conf/domain_conf.c:3407 msgid "missing memory element" msgstr "" #: src/conf/domain_conf.c:3444 #, fuzzy, c-format msgid "unexpected feature %s" msgstr "예상외의 데이터 '%s'" #: src/conf/domain_conf.c:3484 #, fuzzy msgid "no OS type" msgstr "알려지지 않은 OS 유형" #: src/conf/domain_conf.c:3512 #, c-format msgid "os type '%s' & arch '%s' combination is not supported" msgstr "" #: src/conf/domain_conf.c:3520 src/xen/xm_internal.c:709 #, c-format msgid "no supported architecture for os type '%s'" msgstr "" #: src/conf/domain_conf.c:3571 #, fuzzy msgid "cannot extract boot device" msgstr "인터페이스 장치" #: src/conf/domain_conf.c:3579 #, fuzzy msgid "missing boot device" msgstr "root 장치 정보 부재" #: src/conf/domain_conf.c:3584 #, c-format msgid "unknown boot device '%s'" msgstr "알려지지 않은 부팅 장치 %s " #: src/conf/domain_conf.c:3609 #, fuzzy msgid "cannot extract disk devices" msgstr "디스크 장치 부착" #: src/conf/domain_conf.c:3628 #, fuzzy msgid "cannot extract controller devices" msgstr "네트워크 인터페이스 부착" #: src/conf/domain_conf.c:3653 msgid "cannot extract filesystem devices" msgstr "" #: src/conf/domain_conf.c:3672 #, fuzzy msgid "cannot extract network devices" msgstr "네트워크 인터페이스 부착" #: src/conf/domain_conf.c:3693 msgid "cannot extract parallel devices" msgstr "" #: src/conf/domain_conf.c:3713 #, fuzzy msgid "cannot extract serial devices" msgstr "인터페이스 장치" #: src/conf/domain_conf.c:3762 #, fuzzy msgid "cannot extract channel devices" msgstr "인터페이스 장치" #: src/conf/domain_conf.c:3783 #, fuzzy msgid "cannot extract input devices" msgstr "디스크 장치 부착" #: src/conf/domain_conf.c:3818 #, fuzzy msgid "cannot extract graphics devices" msgstr "디스크 장치 부착" #: src/conf/domain_conf.c:3862 #, fuzzy msgid "cannot extract sound devices" msgstr "디스크 장치 부착" #: src/conf/domain_conf.c:3881 #, fuzzy msgid "cannot extract video devices" msgstr "인터페이스 장치" #: src/conf/domain_conf.c:3906 msgid "cannot determine default video type" msgstr "" #: src/conf/domain_conf.c:3922 #, fuzzy msgid "cannot extract host devices" msgstr "디스크 장치 부착" #: src/conf/domain_conf.c:3942 #, fuzzy msgid "cannot extract watchdog devices" msgstr "디스크 장치 부착" #: src/conf/domain_conf.c:3947 msgid "only a single watchdog device is supported" msgstr "" #: src/conf/domain_conf.c:4003 #, fuzzy msgid "no domain config" msgstr "노드 도메인 목록" #: src/conf/domain_conf.c:4017 #, fuzzy msgid "missing domain state" msgstr "도메인 상태" #: src/conf/domain_conf.c:4022 #, fuzzy, c-format msgid "invalid domain state '%s'" msgstr "%s에 있는 잘못된 도메인 포인터" #: src/conf/domain_conf.c:4030 #, fuzzy msgid "invalid pid" msgstr "잘못된 MAC 주소" #: src/conf/domain_conf.c:4060 src/conf/interface_conf.c:873 #: src/conf/network_conf.c:525 src/conf/node_device_conf.c:1254 #: src/conf/secret_conf.c:203 src/conf/storage_conf.c:734 #, c-format msgid "at line %d: %s" msgstr "" #: src/conf/domain_conf.c:4091 src/conf/domain_conf.c:4132 #: src/conf/domain_conf.c:4204 src/conf/interface_conf.c:902 #: src/conf/interface_conf.c:942 src/conf/network_conf.c:554 #: src/conf/network_conf.c:594 src/conf/node_device_conf.c:1296 #: src/conf/secret_conf.c:234 src/conf/storage_conf.c:798 #: src/conf/storage_conf.c:1208 #, fuzzy msgid "failed to parse xml document" msgstr "내용 저장 실패" #: src/conf/domain_conf.c:4162 src/conf/domain_conf.c:4233 #: src/conf/interface_conf.c:841 src/conf/network_conf.c:622 #: src/conf/node_device_conf.c:1223 src/conf/secret_conf.c:117 msgid "incorrect root element" msgstr "" #: src/conf/domain_conf.c:4534 msgid "topology cpuset syntax error" msgstr "" #: src/conf/domain_conf.c:4548 #, fuzzy, c-format msgid "unexpected lifecycle type %d" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:4571 #, fuzzy, c-format msgid "unexpected disk type %d" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:4576 #, fuzzy, c-format msgid "unexpected disk device %d" msgstr "예상외의 dict 노드" #: src/conf/domain_conf.c:4581 #, fuzzy, c-format msgid "unexpected disk bus %d" msgstr "예상외의 dict 노드" #: src/conf/domain_conf.c:4586 #, fuzzy, c-format msgid "unexpected disk cache mode %d" msgstr "예상외의 dict 노드" #: src/conf/domain_conf.c:4657 #, fuzzy, c-format msgid "unexpected controller type %d" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:4687 #, fuzzy, c-format msgid "unexpected filesystem type %d" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:4742 src/conf/domain_conf.c:5129 #, fuzzy, c-format msgid "unexpected net type %d" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:4840 #, fuzzy, c-format msgid "unexpected char type %d" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:4928 #, fuzzy msgid "Unable to format guestfwd port" msgstr "%s 네트워크 시작 실패" #: src/conf/domain_conf.c:4934 #, fuzzy msgid "Unable to format guestfwd address" msgstr "%s 네트워크 시작 실패" #: src/conf/domain_conf.c:4953 #, fuzzy, c-format msgid "unexpected character destination type %d" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:4977 src/xen/xend_internal.c:5679 #, fuzzy, c-format msgid "unexpected sound model %d" msgstr "예상외의 dict 노드" #: src/conf/domain_conf.c:5008 #, fuzzy, c-format msgid "unexpected watchdog model %d" msgstr "예상외의 값 노드" #: src/conf/domain_conf.c:5014 #, fuzzy, c-format msgid "unexpected watchdog action %d" msgstr "예상외의 dict 노드" #: src/conf/domain_conf.c:5056 #, fuzzy, c-format msgid "unexpected video model %d" msgstr "예상외의 값 노드" #: src/conf/domain_conf.c:5094 src/xen/xend_internal.c:5706 #, fuzzy, c-format msgid "unexpected input type %d" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:5099 #, fuzzy, c-format msgid "unexpected input bus type %d" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:5225 #, fuzzy, c-format msgid "unexpected hostdev mode %d" msgstr "예상외의 dict 노드" #: src/conf/domain_conf.c:5232 #, fuzzy, c-format msgid "unexpected hostdev type %d" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:5284 #, fuzzy, c-format msgid "unexpected domain type %d" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:5380 #, fuzzy, c-format msgid "unexpected boot device type %d" msgstr "예상외의 mime 유형" #: src/conf/domain_conf.c:5398 #, fuzzy, c-format msgid "unexpected feature %d" msgstr "예상외의 값 노드" #: src/conf/domain_conf.c:5601 src/conf/network_conf.c:752 #, c-format msgid "cannot create config directory '%s'" msgstr "" #: src/conf/domain_conf.c:5610 src/conf/network_conf.c:761 #, fuzzy, c-format msgid "cannot create config file '%s'" msgstr "%s 설정 파일 읽기 실패" #: src/conf/domain_conf.c:5618 src/conf/network_conf.c:769 #, fuzzy, c-format msgid "cannot write config file '%s'" msgstr "설정 파일 쓰기 실패: %s" #: src/conf/domain_conf.c:5625 src/conf/network_conf.c:776 #, fuzzy, c-format msgid "cannot save config file '%s'" msgstr "%s 설정 파일 구문 분석 실패" #: src/conf/domain_conf.c:5755 #, c-format msgid "unexpected domain %s already exists" msgstr "" #: src/conf/domain_conf.c:5796 src/conf/network_conf.c:878 #: src/conf/storage_conf.c:1542 #, fuzzy, c-format msgid "Failed to open dir '%s'" msgstr "'%s' 열기 실패: %s" #: src/conf/domain_conf.c:5861 #, c-format msgid "cannot remove config %s" msgstr "" #: src/conf/domain_conf.c:5968 src/xen/xm_internal.c:2671 #, c-format msgid "domain '%s' is already defined with uuid %s" msgstr "" #: src/conf/domain_conf.c:5977 #, fuzzy, c-format msgid "domain is already active as '%s'" msgstr "이미 도메인이 활성화됨" #: src/conf/domain_conf.c:5991 #, fuzzy, c-format msgid "domain '%s' already exists with uuid %s" msgstr "이미 %s 도메인이 존재함" #: src/conf/domain_event.c:99 msgid "could not find event callback for removal" msgstr "" #: src/conf/domain_event.c:155 msgid "could not find event callback for deletion" msgstr "" #: src/conf/domain_event.c:216 msgid "event callback already tracked" msgstr "" #: src/conf/domain_event.c:342 msgid "event queue is empty, nothing to pop" msgstr "" #: src/conf/interface_conf.c:128 msgid "interface has no name" msgstr "" #: src/conf/interface_conf.c:144 msgid "interface mtu value is improper" msgstr "" #: src/conf/interface_conf.c:168 #, c-format msgid "unknown interface startmode %s" msgstr "" #: src/conf/interface_conf.c:200 #, fuzzy, c-format msgid "unknown bonding mode %s" msgstr "알려지지 않은 명령: '%s'" #: src/conf/interface_conf.c:221 #, c-format msgid "unknown mii bonding carrier %s" msgstr "" #: src/conf/interface_conf.c:244 #, c-format msgid "unknown arp bonding validate %s" msgstr "" #: src/conf/interface_conf.c:270 #, c-format msgid "unknown dhcp peerdns value %s" msgstr "" #: src/conf/interface_conf.c:296 msgid "Invalid ip address prefix value" msgstr "" #: src/conf/interface_conf.c:453 msgid "protocol misses the family attribute" msgstr "" #: src/conf/interface_conf.c:472 #, c-format msgid "unsupported protocol family '%s'" msgstr "" #: src/conf/interface_conf.c:501 #, fuzzy msgid "bridge interfaces" msgstr "네트워크 인터페이스 분리" #: src/conf/interface_conf.c:543 #, fuzzy msgid "bond has no interfaces" msgstr "네트워크 인터페이스 분리" #: src/conf/interface_conf.c:593 msgid "bond interface miimon freq missing or invalid" msgstr "" #: src/conf/interface_conf.c:601 msgid "bond interface miimon downdelay invalid" msgstr "" #: src/conf/interface_conf.c:610 msgid "bond interface miimon updelay invalid" msgstr "" #: src/conf/interface_conf.c:629 msgid "bond interface arpmon interval missing or invalid" msgstr "" #: src/conf/interface_conf.c:638 #, fuzzy msgid "bond interface arpmon target missing" msgstr "유형이 %s인 인터페이스를 찾을 수 없음" #: src/conf/interface_conf.c:659 msgid "vlan interface misses the tag attribute" msgstr "" #: src/conf/interface_conf.c:667 msgid "vlan interface misses name attribute" msgstr "" #: src/conf/interface_conf.c:685 msgid "interface misses the type attribute" msgstr "" #: src/conf/interface_conf.c:691 #, fuzzy, c-format msgid "unknown interface type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/interface_conf.c:712 #, fuzzy, c-format msgid "interface has unsupported type '%s'" msgstr "유형이 %s인 인터페이스를 찾을 수 없음" #: src/conf/interface_conf.c:749 msgid "bridge interface misses the bridge element" msgstr "" #: src/conf/interface_conf.c:761 #, c-format msgid "bridge interface stp should be on or off got %s" msgstr "" #: src/conf/interface_conf.c:791 msgid "bond interface misses the bond element" msgstr "" #: src/conf/interface_conf.c:812 msgid "vlan interface misses the vlan element" msgstr "" #: src/conf/interface_conf.c:1023 msgid "bond arp monitoring has no target" msgstr "" #: src/conf/interface_conf.c:1051 msgid "vlan misses the tag name" msgstr "" #: src/conf/interface_conf.c:1134 msgid "virInterfaceDefFormat unknown startmode" msgstr "" #: src/conf/interface_conf.c:1148 msgid "virInterfaceDefFormat NULL def" msgstr "" #: src/conf/interface_conf.c:1154 msgid "virInterfaceDefFormat missing interface name" msgstr "" #: src/conf/interface_conf.c:1160 #, fuzzy, c-format msgid "unexpected interface type %d" msgstr "예상외의 mime 유형" #: src/conf/network_conf.c:250 #, fuzzy, c-format msgid "cannot parse dhcp start address '%s'" msgstr "잘못된 MAC 주소: %s" #: src/conf/network_conf.c:259 #, fuzzy, c-format msgid "cannot parse dhcp end address '%s'" msgstr "잘못된 MAC 주소: %s" #: src/conf/network_conf.c:270 #, fuzzy, c-format msgid "dhcp range '%s' to '%s' invalid" msgstr "도메인 상태를 파일에 저장" #: src/conf/network_conf.c:298 #, fuzzy, c-format msgid "cannot parse MAC address '%s'" msgstr "잘못된 MAC 주소: %s" #: src/conf/network_conf.c:305 #, c-format msgid "cannot use name address '%s'" msgstr "" #: src/conf/network_conf.c:321 src/conf/network_conf.c:451 #, c-format msgid "cannot parse IP address '%s'" msgstr "" #: src/conf/network_conf.c:457 #, c-format msgid "cannot parse netmask '%s'" msgstr "" #: src/conf/network_conf.c:481 msgid "Forwarding requested, but no IPv4 address/netmask provided" msgstr "" #: src/conf/network_conf.c:489 #, fuzzy, c-format msgid "unknown forwarding type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/network_conf.c:836 #, c-format msgid "Network config filename '%s' does not match network name '%s'" msgstr "" #: src/conf/network_conf.c:927 #, fuzzy, c-format msgid "cannot remove config file '%s'" msgstr "%s 설정 파일 읽기 실패" #: src/conf/network_conf.c:1001 #, c-format msgid "Bridge generation exceeded max id %d" msgstr "" #: src/conf/network_conf.c:1020 #, c-format msgid "bridge name '%s' already in use." msgstr "" #: src/conf/node_device_conf.c:565 #, c-format msgid "no block device path supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:578 #, c-format msgid "error parsing storage capabilities for '%s'" msgstr "" #: src/conf/node_device_conf.c:588 #, c-format msgid "missing storage capability type for '%s'" msgstr "" #: src/conf/node_device_conf.c:610 #, c-format msgid "no removable media size supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:611 #, c-format msgid "invalid removable media size supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:621 #, c-format msgid "unknown storage capability type '%s' for '%s'" msgstr "" #: src/conf/node_device_conf.c:633 #, c-format msgid "no size supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:634 #, c-format msgid "invalid size supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:661 src/conf/node_device_conf.c:739 #, c-format msgid "no SCSI host ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:662 src/conf/node_device_conf.c:740 #, c-format msgid "invalid SCSI host ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:667 #, c-format msgid "no SCSI bus ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:668 #, c-format msgid "invalid SCSI bus ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:673 #, c-format msgid "no SCSI target ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:674 #, c-format msgid "invalid SCSI target ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:679 #, c-format msgid "no SCSI LUN ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:680 #, c-format msgid "invalid SCSI LUN ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:708 #, fuzzy, c-format msgid "no target name supplied for '%s'" msgstr "네트워크 인터페이스 유형" #: src/conf/node_device_conf.c:746 #, c-format msgid "error parsing SCSI host capabilities for '%s'" msgstr "" #: src/conf/node_device_conf.c:756 #, c-format msgid "missing SCSI host capability type for '%s'" msgstr "" #: src/conf/node_device_conf.c:778 #, c-format msgid "no WWNN supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:786 #, c-format msgid "no WWPN supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:794 #, c-format msgid "unknown SCSI host capability type '%s' for '%s'" msgstr "" #: src/conf/node_device_conf.c:828 #, fuzzy, c-format msgid "no network interface supplied for '%s'" msgstr "네트워크 인터페이스 유형" #: src/conf/node_device_conf.c:843 #, fuzzy, c-format msgid "invalid network type supplied for '%s'" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/conf/node_device_conf.c:871 #, c-format msgid "no USB interface number supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:872 #, c-format msgid "invalid USB interface number supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:877 #, c-format msgid "no USB interface class supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:878 #, c-format msgid "invalid USB interface class supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:883 #, c-format msgid "no USB interface subclass supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:884 #, c-format msgid "invalid USB interface subclass supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:889 #, c-format msgid "no USB interface protocol supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:890 #, c-format msgid "invalid USB interface protocol supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:940 #, c-format msgid "no USB bus number supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:941 #, c-format msgid "invalid USB bus number supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:946 #, c-format msgid "no USB device number supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:947 #, c-format msgid "invalid USB device number supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:952 #, c-format msgid "no USB vendor ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:953 #, c-format msgid "invalid USB vendor ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:958 #, c-format msgid "no USB product ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:959 #, c-format msgid "invalid USB product ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:986 #, c-format msgid "no PCI domain ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:987 #, fuzzy, c-format msgid "invalid PCI domain ID supplied for '%s'" msgstr "%s에 있는 잘못된 도메인 포인터" #: src/conf/node_device_conf.c:992 #, c-format msgid "no PCI bus ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:993 #, c-format msgid "invalid PCI bus ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:998 #, c-format msgid "no PCI slot ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:999 #, c-format msgid "invalid PCI slot ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:1004 #, c-format msgid "no PCI function ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:1005 #, fuzzy, c-format msgid "invalid PCI function ID supplied for '%s'" msgstr "%s에 있는 잘못된 연결 포인터" #: src/conf/node_device_conf.c:1010 #, c-format msgid "no PCI vendor ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:1011 #, c-format msgid "invalid PCI vendor ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:1016 #, c-format msgid "no PCI product ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:1017 #, c-format msgid "invalid PCI product ID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:1052 #, c-format msgid "no system UUID supplied for '%s'" msgstr "" #: src/conf/node_device_conf.c:1058 #, c-format msgid "malformed uuid element for '%s'" msgstr "" #: src/conf/node_device_conf.c:1093 msgid "missing capability type" msgstr "" #: src/conf/node_device_conf.c:1099 #, fuzzy, c-format msgid "unknown capability type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/node_device_conf.c:1136 #, c-format msgid "unknown capability type '%d' for '%s'" msgstr "" #: src/conf/node_device_conf.c:1188 #, c-format msgid "no device capabilities for '%s'" msgstr "" #: src/conf/node_device_conf.c:1356 msgid "Device is not a fibre channel HBA" msgstr "" #: src/conf/node_device_conf.c:1386 #, c-format msgid "Could not find parent HBA for '%s'" msgstr "" #: src/conf/node_device_conf.c:1406 #, c-format msgid "Parent HBA %s is not capable of vport operations" msgstr "" #: src/conf/secret_conf.c:56 src/conf/secret_conf.c:100 #: src/conf/secret_conf.c:274 src/conf/secret_conf.c:291 #, fuzzy, c-format msgid "unexpected secret usage type %d" msgstr "예상외의 mime 유형" #: src/conf/secret_conf.c:72 #, fuzzy msgid "unknown secret usage type" msgstr "알려지지 않은 장치 유형 " #: src/conf/secret_conf.c:78 #, fuzzy, c-format msgid "unknown secret usage type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/secret_conf.c:93 msgid "volume usage specified, but volume path is missing" msgstr "" #: src/conf/secret_conf.c:141 #, fuzzy msgid "invalid value of 'ephemeral'" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: src/conf/secret_conf.c:155 #, fuzzy msgid "invalid value of 'private'" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: src/conf/storage_conf.c:227 src/storage/storage_backend.c:874 #, c-format msgid "missing backend for pool type %d" msgstr "" #: src/conf/storage_conf.c:375 msgid "missing auth host attribute" msgstr "" #: src/conf/storage_conf.c:382 msgid "missing auth passwd attribute" msgstr "" #: src/conf/storage_conf.c:419 #, fuzzy, c-format msgid "unknown pool format type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/storage_conf.c:443 #, fuzzy msgid "missing storage pool source device path" msgstr "%s 장치의 소스 정보 부재" #: src/conf/storage_conf.c:462 #, fuzzy, c-format msgid "unknown auth type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/storage_conf.c:498 msgid "bad spec" msgstr "" #: src/conf/storage_conf.c:516 msgid "root element was not source" msgstr "" #: src/conf/storage_conf.c:568 msgid "malformed octal mode" msgstr "" #: src/conf/storage_conf.c:579 msgid "malformed owner element" msgstr "" #: src/conf/storage_conf.c:590 msgid "malformed group element" msgstr "" #: src/conf/storage_conf.c:622 src/storage/storage_driver.c:446 #: src/test/test_driver.c:3729 #, fuzzy, c-format msgid "unknown storage pool type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/storage_conf.c:646 msgid "missing pool source name element" msgstr "" #: src/conf/storage_conf.c:654 src/storage/storage_backend.c:390 #, fuzzy msgid "unable to generate uuid" msgstr "네트워크 이름 또는 uuid" #: src/conf/storage_conf.c:670 msgid "missing storage pool source host name" msgstr "" #: src/conf/storage_conf.c:678 msgid "missing storage pool source path" msgstr "" #: src/conf/storage_conf.c:696 msgid "missing storage pool source adapter name" msgstr "" #: src/conf/storage_conf.c:703 msgid "missing storage pool target path" msgstr "" #: src/conf/storage_conf.c:750 msgid "unknown root element for storage pool" msgstr "" #: src/conf/storage_conf.c:881 #, c-format msgid "unknown pool format number %d" msgstr "" #: src/conf/storage_conf.c:914 src/conf/storage_conf.c:1723 #, fuzzy msgid "unexpected pool type" msgstr "예상외의 mime 유형" #: src/conf/storage_conf.c:1012 #, fuzzy, c-format msgid "unknown size units '%s'" msgstr "알려지지 않은 호스트 %s" #: src/conf/storage_conf.c:1019 msgid "malformed capacity element" msgstr "" #: src/conf/storage_conf.c:1024 msgid "capacity element value too large" msgstr "" #: src/conf/storage_conf.c:1056 #, fuzzy msgid "missing volume name element" msgstr "도메인 이름 정보 부재" #: src/conf/storage_conf.c:1067 msgid "missing capacity element" msgstr "" #: src/conf/storage_conf.c:1096 src/conf/storage_conf.c:1127 #, fuzzy, c-format msgid "unknown volume format type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/storage_conf.c:1158 msgid "unknown root element for storage vol" msgstr "" #: src/conf/storage_conf.c:1263 #, c-format msgid "unknown volume format number %d" msgstr "" #: src/conf/storage_conf.c:1600 #, c-format msgid "cannot create config directory %s" msgstr "" #: src/conf/storage_conf.c:1608 msgid "cannot construct config file path" msgstr "" #: src/conf/storage_conf.c:1619 msgid "cannot construct autostart link path" msgstr "" #: src/conf/storage_conf.c:1633 #, fuzzy msgid "failed to generate XML" msgstr "XML 생성하기 실패" #: src/conf/storage_conf.c:1641 #, fuzzy, c-format msgid "cannot create config file %s" msgstr "%s 설정 파일 읽기 실패" #: src/conf/storage_conf.c:1649 #, fuzzy, c-format msgid "cannot write config file %s" msgstr "설정 파일 쓰기 실패: %s" #: src/conf/storage_conf.c:1656 #, fuzzy, c-format msgid "cannot save config file %s" msgstr "%s 설정 파일 구문 분석 실패" #: src/conf/storage_conf.c:1677 #, fuzzy, c-format msgid "no config file for %s" msgstr "설정 파일 구문 오류: %s" #: src/conf/storage_conf.c:1683 #, c-format msgid "cannot remove config for %s" msgstr "" #: src/conf/storage_encryption_conf.c:93 #, fuzzy msgid "unknown volume encryption secret type" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/storage_encryption_conf.c:99 #, fuzzy, c-format msgid "unknown volume encryption secret type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/storage_encryption_conf.c:111 #, fuzzy, c-format msgid "malformed volume encryption uuid '%s'" msgstr "%s에 있는 잘못된 인수" #: src/conf/storage_encryption_conf.c:118 #, fuzzy msgid "missing volume encryption uuid" msgstr "도메인 이름 정보 부재" #: src/conf/storage_encryption_conf.c:147 #, fuzzy msgid "unknown volume encryption format" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/storage_encryption_conf.c:153 #, fuzzy, c-format msgid "unknown volume encryption format type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/conf/storage_encryption_conf.c:164 #, fuzzy msgid "cannot extract volume encryption secrets" msgstr "디스크 장치 부착" #: src/conf/storage_encryption_conf.c:196 msgid "unknown root element for volume encryption information" msgstr "" #: src/conf/storage_encryption_conf.c:228 #, fuzzy msgid "unexpected volume encryption secret type" msgstr "예상외의 mime 유형" #: src/conf/storage_encryption_conf.c:248 #, fuzzy msgid "unexpected encryption format" msgstr "예상외의 dict 노드" #: src/conf/storage_encryption_conf.c:275 msgid "Cannot open /dev/urandom" msgstr "" #: src/conf/storage_encryption_conf.c:286 #, fuzzy msgid "Cannot read from /dev/urandom" msgstr "노드 도메인 목록" #: src/cpu/cpu.c:51 src/cpu/cpu_map.c:82 #, fuzzy msgid "undefined hardware architecture" msgstr "비활성화 도메인을 정의하지 않음" #: src/cpu/cpu.c:113 #, c-format msgid "cannot compare CPUs of %s architecture" msgstr "" #: src/cpu/cpu.c:133 msgid "nonzero nmodels doesn't match with NULL models" msgstr "" #: src/cpu/cpu.c:139 #, fuzzy msgid "invalid CPU definition" msgstr "잘못된 도메인 포인터" #: src/cpu/cpu.c:148 #, c-format msgid "cannot decode CPU data for %s architecture" msgstr "" #: src/cpu/cpu.c:174 #, c-format msgid "cannot encode CPU data for %s architecture" msgstr "" #: src/cpu/cpu.c:199 #, c-format msgid "cannot free CPU data for %s architecture" msgstr "" #: src/cpu/cpu.c:219 #, c-format msgid "cannot get node CPU data for %s architecture" msgstr "" #: src/cpu/cpu.c:241 #, c-format msgid "cannot compute guest CPU data for %s architecture" msgstr "" #: src/cpu/cpu_map.c:88 #, fuzzy, c-format msgid "cannot parse CPU map file: %s" msgstr "도메인 %s을(를) 구문 분석할 수 없음 " #: src/cpu/cpu_map.c:106 #, c-format msgid "cannot find CPU map for %s architecture" msgstr "" #: src/cpu/cpu_map.c:113 #, fuzzy, c-format msgid "cannot parse CPU map for %s architecture" msgstr "vnc 포트 %s을(를) 구문 분석할 수 없음 " #: src/cpu/cpu_x86.c:344 #, fuzzy, c-format msgid "CPU feature %s already defined" msgstr "이미 %s 도메인이 존재함" #: src/cpu/cpu_x86.c:374 #, c-format msgid "Invalid cpuid[%d] in %s feature" msgstr "" #: src/cpu/cpu_x86.c:543 #, fuzzy, c-format msgid "Unknown CPU model %s" msgstr "알려지지 않은 노드 %s " #: src/cpu/cpu_x86.c:562 #, fuzzy, c-format msgid "Unknown CPU feature %s" msgstr "알려지지 않음" #: src/cpu/cpu_x86.c:662 #, c-format msgid "Missing ancestor's name in CPU model %s" msgstr "" #: src/cpu/cpu_x86.c:669 #, c-format msgid "Ancestor model %s not found for CPU model %s" msgstr "" #: src/cpu/cpu_x86.c:695 #, fuzzy, c-format msgid "Missing feature name for CPU model %s" msgstr "%s의 장치 정보 부재" #: src/cpu/cpu_x86.c:701 #, fuzzy, c-format msgid "Feature %s required by CPU model %s not found" msgstr "네트워크를 찾을 수 없음" #: src/cpu/cpu_x86.c:997 msgid "Cannot find suitable CPU model for given data" msgstr "" #: src/datatypes.c:341 msgid "failed to add domain to connection hash table" msgstr "해시 테이블 연결에 도메인 추가 실패" #: src/datatypes.c:382 msgid "domain missing from connection hash table" msgstr "해시 테이블 연결에서 도메인 부재" #: src/datatypes.c:482 msgid "failed to add network to connection hash table" msgstr "해시 테이블 연결에 네트워크 추가 실패" #: src/datatypes.c:520 msgid "network missing from connection hash table" msgstr "해시 테이블 연결에서 네트워크 부재" #: src/datatypes.c:629 #, c-format msgid "" "Failed to change interface mac address from %s to %s due to differing " "lengths." msgstr "" #: src/datatypes.c:660 #, fuzzy msgid "failed to add interface to connection hash table" msgstr "해시 테이블 연결에 네트워크 추가 실패" #: src/datatypes.c:699 #, fuzzy msgid "interface missing from connection hash table" msgstr "해시 테이블 연결에서 네트워크 부재" #: src/datatypes.c:801 #, fuzzy msgid "failed to add storage pool to connection hash table" msgstr "해시 테이블 연결에 네트워크 추가 실패" #: src/datatypes.c:840 #, fuzzy msgid "pool missing from connection hash table" msgstr "해시 테이블 연결에서 도메인 부재" #: src/datatypes.c:939 #, c-format msgid "Volume key %s too large for destination" msgstr "" #: src/datatypes.c:948 #, fuzzy msgid "failed to add storage vol to connection hash table" msgstr "해시 테이블 연결에 네트워크 추가 실패" #: src/datatypes.c:988 #, fuzzy msgid "vol missing from connection hash table" msgstr "해시 테이블 연결에서 도메인 부재" #: src/datatypes.c:1084 #, fuzzy msgid "failed to add node dev to conn hash table" msgstr "해시 테이블 연결에 네트워크 추가 실패" #: src/datatypes.c:1122 #, fuzzy msgid "dev missing from connection hash table" msgstr "해시 테이블 연결에서 도메인 부재" #: src/datatypes.c:1218 #, fuzzy msgid "failed to add secret to conn hash table" msgstr "해시 테이블 연결에 네트워크 추가 실패" #: src/datatypes.c:1257 #, fuzzy msgid "secret missing from connection hash table" msgstr "해시 테이블 연결에서 도메인 부재" #: src/interface/netcf_driver.c:186 #, fuzzy msgid "failed to get number of interfaces on host" msgstr "%s %s 인터페이스 상태 보기 실패" #: src/interface/netcf_driver.c:207 #, fuzzy msgid "failed to list host interfaces" msgstr "호스트명 보기 실패" #: src/interface/netcf_driver.c:228 #, fuzzy msgid "failed to get number of defined interfaces on host" msgstr "로그 파일 정보 보기 실패" #: src/interface/netcf_driver.c:249 #, fuzzy msgid "failed to list host defined interfaces" msgstr "활성화 네트워크 보들기 실패" #: src/interface/netcf_driver.c:316 msgid "multiple interfaces with matching MAC address" msgstr "" #: src/libvirt.c:1094 #, fuzzy msgid "could not parse connection URI" msgstr "%s에 연결할 수 없음" #: src/libvirt.c:2351 msgid "cannot get working directory" msgstr "" #: src/libvirt.c:2358 src/libvirt.c:2434 msgid "path too long" msgstr "" #: src/libvirt.c:2427 #, fuzzy msgid "cannot get current directory" msgstr "현재 도메인 메모리" #: src/libvirt.c:2929 msgid "virDomainGetXMLDesc with secure flag" msgstr "" #: src/libvirt.c:3092 #, fuzzy msgid "domainMigratePrepare did not set uri" msgstr "도메인 정보가 수치가 아닌 잘못된 domid임" #: src/libvirt.c:3180 src/qemu/qemu_driver.c:8083 #, fuzzy msgid "domainMigratePrepare2 did not set uri" msgstr "도메인 정보가 수치가 아닌 잘못된 domid임" #: src/libvirt.c:3413 msgid "cannot perform tunnelled migration without using peer2peer flag" msgstr "" #: src/libvirt.c:4263 src/libvirt.c:4368 msgid "flags must be zero" msgstr "" #: src/libvirt.c:4362 msgid "path is NULL" msgstr "" #: src/libvirt.c:4375 msgid "buffer is NULL" msgstr "" #: src/libvirt.c:4476 src/qemu/qemu_driver.c:6986 msgid "flags parameter must be VIR_MEMORY_VIRTUAL or VIR_MEMORY_PHYSICAL" msgstr "" #: src/libvirt.c:4483 msgid "buffer is NULL but size is non-zero" msgstr "" #: src/libvirt.c:10248 msgid "data sources cannot be used for non-blocking streams" msgstr "" #: src/libvirt.c:10345 msgid "data sinks cannot be used for non-blocking streams" msgstr "" #: src/lxc/lxc_container.c:129 #, fuzzy msgid "setsid failed" msgstr "작업 실패" #: src/lxc/lxc_container.c:135 msgid "ioctl(TIOCSTTY) failed" msgstr "" #: src/lxc/lxc_container.c:148 #, fuzzy msgid "dup2(stdin) failed" msgstr "작업 실패" #: src/lxc/lxc_container.c:154 msgid "dup2(stdout) failed" msgstr "" #: src/lxc/lxc_container.c:160 msgid "dup2(stderr) failed" msgstr "" #: src/lxc/lxc_container.c:188 #, fuzzy msgid "Unable to send container continue message" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/lxc/lxc_container.c:217 #, fuzzy msgid "Failed to read the container continue message" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/lxc/lxc_container.c:312 #, fuzzy msgid "Failed to make root private" msgstr "호스트명 보기 실패" #: src/lxc/lxc_container.c:323 src/lxc/lxc_container.c:345 #: src/lxc/lxc_container.c:516 #, fuzzy, c-format msgid "Failed to create %s" msgstr "XML 생성하기 실패" #: src/lxc/lxc_container.c:332 #, fuzzy, c-format msgid "Failed to mount empty tmpfs at %s" msgstr "'%s' 도메인 보기 실패" #: src/lxc/lxc_container.c:353 #, fuzzy, c-format msgid "Failed to bind new root %s into tmpfs" msgstr "%s에서 네트워크 정의하기 실패" #: src/lxc/lxc_container.c:362 #, fuzzy, c-format msgid "Failed to chroot into %s" msgstr "도메인 %s를 재부팅하기 실패" #: src/lxc/lxc_container.c:370 #, fuzzy msgid "Failed to pivot root" msgstr "호스트명 보기 실패" #: src/lxc/lxc_container.c:413 #, fuzzy, c-format msgid "Failed to mkdir %s" msgstr "%s 실행 실패\n" #: src/lxc/lxc_container.c:419 #, fuzzy, c-format msgid "Failed to mount %s on %s" msgstr "'%s' 열기 실패: %s" #: src/lxc/lxc_container.c:427 #, fuzzy msgid "Cannot create /dev/pts" msgstr "내부 오류 %s" #: src/lxc/lxc_container.c:434 #, fuzzy msgid "Failed to mount /dev/pts in container" msgstr "노드 정보 보기 실패" #: src/lxc/lxc_container.c:469 #, fuzzy, c-format msgid "Failed to make device %s" msgstr "%s 실행 실패\n" #: src/lxc/lxc_container.c:478 #, fuzzy msgid "Failed to create symlink /dev/ptmx to /dev/pts/ptmx" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/lxc/lxc_container.c:486 #, fuzzy msgid "Failed to make device /dev/ptmx" msgstr "%s에서 장치 부착하기 실패" #: src/lxc/lxc_container.c:523 src/lxc/lxc_container.c:639 #, fuzzy, c-format msgid "Failed to mount %s at %s" msgstr "'%s' 열기 실패: %s" #: src/lxc/lxc_container.c:546 #, fuzzy msgid "Failed to read /proc/mounts" msgstr "Xen 데몬에서 읽기 실패" #: src/lxc/lxc_container.c:575 #, fuzzy, c-format msgid "Failed to unmount '%s'" msgstr "'%s' 도메인 보기 실패" #: src/lxc/lxc_container.c:625 #, fuzzy msgid "Failed to make / slave" msgstr "파일 열기 실패" #: src/lxc/lxc_container.c:649 #, fuzzy msgid "Failed to mount /proc" msgstr "파일 열기 실패" #: src/lxc/lxc_container.c:688 #, fuzzy, c-format msgid "Failed to remove capabilities: %d" msgstr "기능 전환 실패" #: src/lxc/lxc_container.c:694 #, fuzzy, c-format msgid "Failed to apply capabilities: %d" msgstr "기능 전환 실패" #: src/lxc/lxc_container.c:705 src/lxc/lxc_controller.c:261 msgid "libcap-ng support not compiled in, unable to clear capabilities" msgstr "" #: src/lxc/lxc_container.c:733 msgid "lxcChild() passed invalid vm definition" msgstr "" #: src/lxc/lxc_container.c:754 #, fuzzy, c-format msgid "Failed to open tty %s" msgstr "'%s' 열기 실패: %s" #: src/lxc/lxc_container.c:837 #, fuzzy msgid "Failed to run clone container" msgstr "내용 저장 실패" #: src/lxc/lxc_controller.c:92 msgid "Unable to get cgroup for driver" msgstr "" #: src/lxc/lxc_controller.c:99 #, fuzzy, c-format msgid "Unable to create cgroup for domain %s" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/lxc/lxc_controller.c:107 #, fuzzy, c-format msgid "Unable to set memory limit for domain %s" msgstr "도메인 %s 시작하기 실패" #: src/lxc/lxc_controller.c:115 #, fuzzy, c-format msgid "Unable to deny devices for domain %s" msgstr "%s에서 장치 분리 실패" #: src/lxc/lxc_controller.c:128 #, fuzzy, c-format msgid "Unable to allow device %c:%d:%d for domain %s" msgstr "%s에서 장치 부착하기 실패" #: src/lxc/lxc_controller.c:137 #, fuzzy, c-format msgid "Unable to allow PYT devices for domain %s" msgstr "%s에서 장치 부착하기 실패" #: src/lxc/lxc_controller.c:145 #, fuzzy, c-format msgid "Unable to add task %d to cgroup for domain %s" msgstr "%s 도메인 강제 종료 실패 " #: src/lxc/lxc_controller.c:173 #, fuzzy, c-format msgid "failed to create server socket '%s'" msgstr "소켓 %d에 읽기 실패\n" #: src/lxc/lxc_controller.c:183 #, c-format msgid "Socket path %s too long for destination" msgstr "" #: src/lxc/lxc_controller.c:189 #, fuzzy, c-format msgid "failed to bind server socket '%s'" msgstr "소켓 %d에 읽기 실패\n" #: src/lxc/lxc_controller.c:195 #, fuzzy, c-format msgid "failed to listen server socket %s" msgstr "소켓 %d를 닫기 실패\n" #: src/lxc/lxc_controller.c:229 #, c-format msgid "read of fd %d failed" msgstr "" #: src/lxc/lxc_controller.c:236 #, c-format msgid "write to fd %d failed" msgstr "" #: src/lxc/lxc_controller.c:257 #, fuzzy, c-format msgid "failed to apply capabilities: %d" msgstr "기능 전환 실패" #: src/lxc/lxc_controller.c:309 msgid "epoll_create(2) failed" msgstr "" #: src/lxc/lxc_controller.c:319 msgid "epoll_ctl(appPty) failed" msgstr "" #: src/lxc/lxc_controller.c:325 msgid "epoll_ctl(contPty) failed" msgstr "" #: src/lxc/lxc_controller.c:333 msgid "epoll_ctl(monitor) failed" msgstr "" #: src/lxc/lxc_controller.c:341 src/lxc/lxc_controller.c:361 #: src/lxc/lxc_controller.c:367 #, fuzzy msgid "epoll_ctl(client) failed" msgstr "작업 실패" #: src/lxc/lxc_controller.c:384 #, c-format msgid "error event %d" msgstr "" #: src/lxc/lxc_controller.c:405 msgid "epoll_wait() failed" msgstr "" #: src/lxc/lxc_controller.c:455 #, fuzzy, c-format msgid "Failed to move interface %s to ns %d" msgstr "%s %s 인터페이스 상태 보기 실패" #: src/lxc/lxc_controller.c:480 #, fuzzy, c-format msgid "Failed to delete veth: %s" msgstr "'%s' 네트워크 보기 실패" #: src/lxc/lxc_controller.c:513 #, fuzzy msgid "sockpair failed" msgstr "작업 실패" #: src/lxc/lxc_controller.c:543 msgid "Cannot unshare mount namespace" msgstr "" #: src/lxc/lxc_controller.c:549 #, fuzzy msgid "Failed to switch root mount into slave mode" msgstr "Xen Store에 연결 실패" #: src/lxc/lxc_controller.c:561 #, fuzzy, c-format msgid "Failed to make path %s" msgstr "%s 실행 실패\n" #: src/lxc/lxc_controller.c:569 #, fuzzy, c-format msgid "Failed to mount devpts on %s" msgstr "'%s' 도메인 보기 실패" #: src/lxc/lxc_controller.c:587 src/lxc/lxc_controller.c:596 #: src/lxc/lxc_driver.c:1212 #, fuzzy msgid "Failed to allocate tty" msgstr "노드 할당 실패" #: src/lxc/lxc_controller.c:773 #, fuzzy, c-format msgid "Unable to write pid file '%s/%s.pid'" msgstr "로그 파일 쓰기 실패" #: src/lxc/lxc_controller.c:787 #, fuzzy msgid "Unable to change to root dir" msgstr "최대 메모리 크기를 변경할 수 없음" #: src/lxc/lxc_controller.c:793 msgid "Unable to become session leader" msgstr "" #: src/lxc/lxc_controller.c:804 #, fuzzy msgid "Failed to accept a connection from driver" msgstr "하이퍼바이저에서 연결 끊기 실패" #: src/lxc/lxc_driver.c:131 #, c-format msgid "Unexpected LXC URI path '%s', try lxc:///" msgstr "" #: src/lxc/lxc_driver.c:139 msgid "lxc state driver is not active" msgstr "" #: src/lxc/lxc_driver.c:378 src/lxc/lxc_driver.c:1315 #: src/lxc/lxc_driver.c:1365 msgid "System lacks NETNS support" msgstr "" #: src/lxc/lxc_driver.c:427 src/lxc/lxc_driver.c:479 src/lxc/lxc_driver.c:532 #: src/lxc/lxc_driver.c:666 #, fuzzy msgid "No domain with matching uuid" msgstr "도메인 id 또는 uuid" #: src/lxc/lxc_driver.c:433 #, fuzzy msgid "Cannot delete active domain" msgstr "비활성화 도메인명" #: src/lxc/lxc_driver.c:439 #, fuzzy msgid "Cannot undefine transient domain" msgstr "비활성화 도메인을 정의하지 않음" #: src/lxc/lxc_driver.c:491 #, fuzzy, c-format msgid "Unable to get cgroup for %s" msgstr "%s 네트워크 강제 종료 실패" #: src/lxc/lxc_driver.c:497 #, fuzzy msgid "Cannot read cputime for domain" msgstr "비활성화 도메인명" #: src/lxc/lxc_driver.c:502 #, fuzzy msgid "Cannot read memory usage for domain" msgstr "비활성화 도메인명" #: src/lxc/lxc_driver.c:561 src/lxc/lxc_driver.c:586 src/lxc/lxc_driver.c:618 #: src/lxc/lxc_driver.c:2030 src/lxc/lxc_driver.c:2084 #: src/lxc/lxc_driver.c:2111 src/lxc/lxc_driver.c:2280 #: src/lxc/lxc_driver.c:2345 #, fuzzy, c-format msgid "No domain with matching uuid '%s'" msgstr "도메인 id 또는 uuid" #: src/lxc/lxc_driver.c:592 #, fuzzy msgid "Cannot set max memory lower than current memory" msgstr "비활성화 도메인명" #: src/lxc/lxc_driver.c:624 #, fuzzy msgid "Cannot set memory higher than max memory" msgstr "비활성화 도메인명" #: src/lxc/lxc_driver.c:631 #, fuzzy, c-format msgid "Unable to get cgroup for %s\n" msgstr "%s 네트워크 강제 종료 실패" #: src/lxc/lxc_driver.c:637 #, fuzzy msgid "Failed to set memory for domain" msgstr "비활성화 도메인명" #: src/lxc/lxc_driver.c:711 #, c-format msgid "waitpid failed to wait for container %d: %d" msgstr "" #: src/lxc/lxc_driver.c:805 #, fuzzy msgid "Failed to get bridge for interface" msgstr "네트워크 인터페이스를 연결하기 위해 사용된 스크립트" #: src/lxc/lxc_driver.c:816 #, fuzzy, c-format msgid "Failed to create veth device pair: %d" msgstr "%s에서 장치 부착하기 실패" #: src/lxc/lxc_driver.c:842 #, fuzzy, c-format msgid "Failed to set %s to %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/lxc/lxc_driver.c:850 #, fuzzy, c-format msgid "Failed to add %s device to %s" msgstr "%s에서 장치 부착하기 실패" #: src/lxc/lxc_driver.c:857 #, fuzzy, c-format msgid "Failed to enable %s device" msgstr "노드 할당 실패" #: src/lxc/lxc_driver.c:888 #, fuzzy msgid "Failed to create client socket" msgstr "소켓 %d에 쓰기 실패\n" #: src/lxc/lxc_driver.c:896 #, c-format msgid "Socket path %s too big for destination" msgstr "" #: src/lxc/lxc_driver.c:902 #, fuzzy msgid "Failed to connect to client socket" msgstr "Xen Store에 연결 실패" #: src/lxc/lxc_driver.c:927 #, fuzzy, c-format msgid "Invalid PID %d for container" msgstr "잘못된 도메인 포인터" #: src/lxc/lxc_driver.c:934 #, fuzzy, c-format msgid "Failed to kill pid %d" msgstr "노드 할당 실패" #: src/lxc/lxc_driver.c:1135 #, fuzzy, c-format msgid "Cannot wait for '%s'" msgstr "상태 없음" #: src/lxc/lxc_driver.c:1142 #, c-format msgid "Container '%s' unexpectedly shutdown during startup" msgstr "" #: src/lxc/lxc_driver.c:1198 #, fuzzy, c-format msgid "Cannot create log directory '%s'" msgstr "%s 설정 파일 읽기 실패" #: src/lxc/lxc_driver.c:1233 #, fuzzy, c-format msgid "Failed to open '%s'" msgstr "'%s' 열기 실패: %s" #: src/lxc/lxc_driver.c:1253 #, fuzzy, c-format msgid "Failed to read pid file %s/%s.pid" msgstr "%s 설정 파일 읽기 실패" #: src/lxc/lxc_driver.c:1309 #, fuzzy, c-format msgid "No domain named %s" msgstr "도메인명" #: src/lxc/lxc_driver.c:1418 src/lxc/lxc_driver.c:1551 #, fuzzy, c-format msgid "No domain with id %d" msgstr "노드 도메인 목록" #: src/lxc/lxc_driver.c:1606 src/qemu/qemu_driver.c:593 #: src/uml/uml_driver.c:163 #, fuzzy, c-format msgid "Failed to autostart VM '%s': %s" msgstr "'%s' 열기 실패: %s" #: src/lxc/lxc_driver.c:1884 #, fuzzy, c-format msgid "Unknown release: %s" msgstr "알려지지 않은 호스트 %s" #: src/lxc/lxc_driver.c:1926 src/lxc/lxc_driver.c:1984 #: src/qemu/qemu_driver.c:6611 src/qemu/qemu_driver.c:6682 #, fuzzy, c-format msgid "No such domain %s" msgstr "도메인 %s를 다시 시작하기 실패" #: src/lxc/lxc_driver.c:1937 msgid "Invalid type for cpu_shares tunable, expected a 'ullong'" msgstr "" #: src/lxc/lxc_driver.c:1946 src/qemu/qemu_driver.c:6640 #, fuzzy, c-format msgid "Invalid parameter `%s'" msgstr "%s에 있는 잘못된 인수" #: src/lxc/lxc_driver.c:1975 src/qemu/qemu_driver.c:6674 #, fuzzy msgid "Invalid parameter count" msgstr "잘못된 인수" #: src/lxc/lxc_driver.c:1996 msgid "Field cpu_shares too big for destination" msgstr "" #: src/lxc/lxc_driver.c:2036 src/lxc/lxc_driver.c:2286 #: src/lxc/lxc_driver.c:2351 #, fuzzy msgid "Domain is not running" msgstr "도메인이 아직 실행 중" #: src/lxc/lxc_driver.c:2053 #, c-format msgid "Invalid path, '%s' is not a known interface" msgstr "" #: src/lxc/lxc_driver.c:2117 #, fuzzy msgid "Cannot set autostart for transient domain" msgstr "자동으로 도메인 시작" #: src/lxc/lxc_driver.c:2142 #, fuzzy, c-format msgid "Cannot create autostart directory %s" msgstr "현재 도메인 메모리" #: src/lxc/lxc_driver.c:2149 src/qemu/qemu_driver.c:6538 #: src/uml/uml_driver.c:1752 #, fuzzy, c-format msgid "Failed to create symlink '%s to '%s'" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/lxc/lxc_driver.c:2156 src/network/bridge_driver.c:1538 #: src/qemu/qemu_driver.c:6545 src/storage/storage_driver.c:1036 #: src/uml/uml_driver.c:1759 #, fuzzy, c-format msgid "Failed to delete symlink '%s'" msgstr "'%s' 도메인 보기 실패" #: src/lxc/lxc_driver.c:2293 #, fuzzy msgid "Suspend operation failed" msgstr "작업 실패" #: src/lxc/lxc_driver.c:2358 #, fuzzy msgid "Resume operation failed" msgstr "작업 실패" #: src/network/bridge_driver.c:246 src/qemu/qemu_conf.c:1462 #: src/uml/uml_conf.c:114 msgid "cannot initialize bridge support" msgstr "" #: src/network/bridge_driver.c:538 msgid "cannot start dhcp daemon without IP address for server" msgstr "" #: src/network/bridge_driver.c:544 src/network/bridge_driver.c:550 #, c-format msgid "cannot create directory %s" msgstr "" #: src/network/bridge_driver.c:603 #, c-format msgid "failed to add iptables rule to allow forwarding from '%s'" msgstr "" #: src/network/bridge_driver.c:614 #, c-format msgid "failed to add iptables rule to allow forwarding to '%s'" msgstr "" #: src/network/bridge_driver.c:624 #, c-format msgid "failed to add iptables rule to enable masquerading to '%s'\n" msgstr "" #: src/network/bridge_driver.c:656 #, fuzzy, c-format msgid "failed to add iptables rule to allow routing from '%s'" msgstr "%s에서 도메인을 복구하기 실패" #: src/network/bridge_driver.c:667 #, c-format msgid "failed to add iptables rule to allow routing to '%s'" msgstr "" #: src/network/bridge_driver.c:693 src/network/bridge_driver.c:700 #, c-format msgid "failed to add iptables rule to allow DHCP requests from '%s'" msgstr "" #: src/network/bridge_driver.c:708 src/network/bridge_driver.c:715 #, c-format msgid "failed to add iptables rule to allow DNS requests from '%s'" msgstr "" #: src/network/bridge_driver.c:725 #, c-format msgid "failed to add iptables rule to block outbound traffic from '%s'" msgstr "" #: src/network/bridge_driver.c:732 #, c-format msgid "failed to add iptables rule to block inbound traffic to '%s'" msgstr "" #: src/network/bridge_driver.c:740 #, c-format msgid "failed to add iptables rule to allow cross bridge traffic on '%s'" msgstr "" #: src/network/bridge_driver.c:815 msgid "Reloading iptables rules" msgstr "" #: src/network/bridge_driver.c:859 src/network/bridge_driver.c:883 #, fuzzy, c-format msgid "cannot enable %s" msgstr "내부 오류 %s" #: src/network/bridge_driver.c:871 #, c-format msgid "cannot disable %s" msgstr "" #: src/network/bridge_driver.c:900 #, fuzzy msgid "network is already active" msgstr "이미 도메인이 활성화됨" #: src/network/bridge_driver.c:906 #, c-format msgid "cannot create bridge '%s'" msgstr "" #: src/network/bridge_driver.c:923 #, c-format msgid "cannot set IP address on bridge '%s' to '%s'" msgstr "" #: src/network/bridge_driver.c:931 #, c-format msgid "cannot set netmask on bridge '%s' to '%s'" msgstr "" #: src/network/bridge_driver.c:938 #, fuzzy, c-format msgid "failed to bring the bridge '%s' up" msgstr "'%s' 도메인 보기 실패" #: src/network/bridge_driver.c:949 #, fuzzy msgid "failed to enable IP forwarding" msgstr "읽기 용 %s 열기 실패" #: src/network/bridge_driver.c:980 src/network/bridge_driver.c:1020 #, fuzzy, c-format msgid "Failed to bring down bridge '%s' : %s" msgstr "'%s' 열기 실패: %s" #: src/network/bridge_driver.c:987 src/network/bridge_driver.c:1025 #, fuzzy, c-format msgid "Failed to delete bridge '%s' : %s" msgstr "'%s' 열기 실패: %s" #: src/network/bridge_driver.c:1001 #, fuzzy, c-format msgid "Shutting down network '%s'" msgstr "'%s' 네트워크 보기 실패" #: src/network/bridge_driver.c:1058 src/network/bridge_driver.c:1327 #: src/network/bridge_driver.c:1365 src/network/bridge_driver.c:1388 #: src/network/bridge_driver.c:1423 src/network/bridge_driver.c:1478 #: src/network/bridge_driver.c:1503 msgid "no network with matching uuid" msgstr "" #: src/network/bridge_driver.c:1081 #, c-format msgid "no network with matching name '%s'" msgstr "" #: src/network/bridge_driver.c:1333 #, fuzzy msgid "network is still active" msgstr "네트워크가 아직 실행 중" #: src/network/bridge_driver.c:1394 #, fuzzy msgid "network is not active" msgstr "네트워크 인터페이스 유형" #: src/network/bridge_driver.c:1446 #, fuzzy msgid "no network with matching id" msgstr "XML에 있는 네트워크 정보" #: src/network/bridge_driver.c:1452 src/test/test_driver.c:3061 #, c-format msgid "network '%s' does not have a bridge name." msgstr "" #: src/network/bridge_driver.c:1509 #, fuzzy msgid "cannot set autostart for transient network" msgstr "네트워크 자동 시작" #: src/network/bridge_driver.c:1524 #, c-format msgid "cannot create autostart directory '%s'" msgstr "" #: src/network/bridge_driver.c:1531 src/storage/storage_driver.c:1028 #, fuzzy, c-format msgid "Failed to create symlink '%s' to '%s'" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/node_device/node_device_driver.c:54 #, fuzzy, c-format msgid "Failed to refresh WWPN for host%d" msgstr "%s에서 도메인을 복구하기 실패" #: src/node_device/node_device_driver.c:61 #, fuzzy, c-format msgid "Failed to refresh WWNN for host%d" msgstr "%s에서 도메인을 복구하기 실패" #: src/node_device/node_device_driver.c:101 #, c-format msgid "cannot resolve driver link %s" msgstr "" #: src/node_device/node_device_driver.c:280 #: src/node_device/node_device_driver.c:309 #: src/node_device/node_device_driver.c:344 #: src/node_device/node_device_driver.c:375 src/test/test_driver.c:4811 #: src/test/test_driver.c:4837 src/test/test_driver.c:4873 #: src/test/test_driver.c:4904 #, c-format msgid "no node device with matching name '%s'" msgstr "" #: src/node_device/node_device_driver.c:320 src/test/test_driver.c:4848 #, fuzzy msgid "no parent for this device" msgstr "디스크 장치의 대상" #: src/node_device/node_device_driver.c:421 #, c-format msgid "Invalid vport operation (%d)" msgstr "" #: src/node_device/node_device_driver.c:438 #, fuzzy, c-format msgid "Vport operation path is '%s'" msgstr "작업 실패: %s" #: src/node_device/node_device_driver.c:452 #, c-format msgid "Write of '%s' to '%s' during vport create/delete failed" msgstr "" #: src/node_device/node_device_driver.c:461 #, fuzzy msgid "Vport operation complete" msgstr "작업 실패" #: src/node_device/node_device_driver.c:474 #, fuzzy msgid "Could not get current time" msgstr "Xen Store에 연결할 수 없음" #: src/node_device/node_device_linux_sysfs.c:56 #, fuzzy, c-format msgid "Opened WWN path '%s' for reading" msgstr "읽기 용 %s 열기 실패" #: src/node_device/node_device_linux_sysfs.c:59 #, fuzzy, c-format msgid "Failed to open WWN path '%s' for reading" msgstr "읽기 용 %s 열기 실패" #: src/node_device/node_device_linux_sysfs.c:82 #, fuzzy, c-format msgid "Failed to read WWN for host%d '%s'" msgstr "%s에서 도메인 생성하기 실패" #: src/node_device/node_device_linux_sysfs.c:120 #, c-format msgid "Checking if host%d is an FC HBA" msgstr "" #: src/node_device/node_device_linux_sysfs.c:140 #, fuzzy, c-format msgid "Failed to read WWPN for host%d" msgstr "소켓 %d에 읽기 실패\n" #: src/node_device/node_device_linux_sysfs.c:149 #, fuzzy, c-format msgid "Failed to read WWNN for host%d" msgstr "소켓 %d에 읽기 실패\n" #: src/node_device/node_device_udev.c:115 #, c-format msgid "udev reports device '%s' does not have property '%s'" msgstr "" #: src/node_device/node_device_udev.c:204 #, c-format msgid "udev reports device '%s' does not have sysfs attr '%s'" msgstr "" #: src/nodeinfo.c:82 msgid "parsing cpuinfo processor" msgstr "" #: src/nodeinfo.c:94 msgid "parsing cpuinfo cpu MHz" msgstr "" #: src/nodeinfo.c:121 #, fuzzy msgid "no cpus found" msgstr "노드 cpu numa 노드" #: src/nodeinfo.c:159 src/uml/uml_driver.c:1821 src/util/pci.c:1225 #: src/util/util.c:355 #, fuzzy, c-format msgid "cannot open %s" msgstr "도메인을 찾을 수 없음: %s" #: src/nodeinfo.c:175 msgid "node info not implemented on this platform" msgstr "" #: src/nodeinfo.c:257 src/nodeinfo.c:294 msgid "NUMA not supported on this host" msgstr "" #: src/nodeinfo.c:263 #, c-format msgid "start cell %d out of range (0-%d)" msgstr "" #: src/nodeinfo.c:275 src/nodeinfo.c:302 #, fuzzy msgid "Failed to query NUMA free memory" msgstr "사용된 메모리:" #: src/nodeinfo.c:323 src/nodeinfo.c:330 msgid "NUMA memory information not available on this platform" msgstr "" #: src/opennebula/one_conf.c:150 msgid "Error submitting virtual machine to OpenNebula" msgstr "" #: src/opennebula/one_driver.c:283 src/opennebula/one_driver.c:314 #: src/opennebula/one_driver.c:389 src/openvz/openvz_driver.c:395 #: src/openvz/openvz_driver.c:478 src/openvz/openvz_driver.c:522 #: src/openvz/openvz_driver.c:559 src/openvz/openvz_driver.c:1015 #: src/openvz/openvz_driver.c:1057 src/openvz/openvz_driver.c:1088 #: src/openvz/openvz_driver.c:1161 src/uml/uml_driver.c:1374 #: src/uml/uml_driver.c:1497 src/uml/uml_driver.c:1537 #: src/uml/uml_driver.c:1587 src/uml/uml_driver.c:1652 #: src/uml/uml_driver.c:1696 src/uml/uml_driver.c:1722 #: src/uml/uml_driver.c:1796 #, fuzzy msgid "no domain with matching uuid" msgstr "도메인 id 또는 uuid" #: src/opennebula/one_driver.c:289 src/qemu/qemu_driver.c:5102 #: src/uml/uml_driver.c:1664 #, fuzzy msgid "cannot undefine transient domain" msgstr "비활성화 도메인을 정의하지 않음" #: src/opennebula/one_driver.c:320 src/test/test_driver.c:519 #: src/test/test_driver.c:1672 src/test/test_driver.c:2113 #: src/test/test_driver.c:2608 src/test/test_driver.c:2663 msgid "getting time of day" msgstr "시간 읽어오는 중" #: src/opennebula/one_driver.c:416 #, fuzzy, c-format msgid "no domain named %s" msgstr "도메인명" #: src/opennebula/one_driver.c:453 #, c-format msgid "Already an OpenNebula VM active with the name: '%s' id: %d " msgstr "" #: src/opennebula/one_driver.c:496 src/opennebula/one_driver.c:531 #, fuzzy, c-format msgid "no domain with id %d" msgstr "노드 도메인 목록" #: src/opennebula/one_driver.c:502 src/opennebula/one_driver.c:538 #: src/opennebula/one_driver.c:573 src/opennebula/one_driver.c:606 msgid "Wrong state to perform action" msgstr "" #: src/opennebula/one_driver.c:577 src/qemu/qemu_driver.c:3403 #: src/qemu/qemu_driver.c:3460 src/qemu/qemu_driver.c:3519 #: src/qemu/qemu_driver.c:3560 src/qemu/qemu_driver.c:3885 #: src/qemu/qemu_driver.c:4034 src/qemu/qemu_driver.c:6747 #: src/qemu/qemu_driver.c:6816 src/qemu/qemu_driver.c:6879 #: src/qemu/qemu_driver.c:6995 src/qemu/qemu_driver.c:8186 #: src/xen/xen_hypervisor.c:1147 src/xen/xen_hypervisor.c:1231 #: src/xen/xen_hypervisor.c:1340 #, fuzzy msgid "domain is not running" msgstr "도메인이 아직 실행 중" #: src/opennebula/one_driver.c:580 src/opennebula/one_driver.c:613 #: src/qemu/qemu_driver.c:3174 src/uml/uml_driver.c:1314 #: src/uml/uml_driver.c:1344 src/vbox/vbox_tmpl.c:1028 #, c-format msgid "no domain with matching id %d" msgstr "" #: src/opennebula/one_driver.c:610 #, fuzzy msgid "domain is not paused" msgstr "도메인 id 또는 uuid" #: src/openvz/openvz_conf.c:131 #, fuzzy msgid "Could not extract vzctl version" msgstr "하이퍼바이저에 연결할 수 없음" #: src/openvz/openvz_conf.c:198 #, c-format msgid "Could not read 'IP_ADDRESS' from config for container %d" msgstr "" #: src/openvz/openvz_conf.c:230 #, c-format msgid "Could not read 'NETIF' from config for container %d" msgstr "" #: src/openvz/openvz_conf.c:256 #, fuzzy msgid "Too long network device name" msgstr "네트워크 파일명 해결 중" #: src/openvz/openvz_conf.c:265 #, c-format msgid "Network ifname %s too long for destination" msgstr "" #: src/openvz/openvz_conf.c:273 msgid "Too long bridge device name" msgstr "" #: src/openvz/openvz_conf.c:282 #, c-format msgid "Bridge name %s too long for destination" msgstr "" #: src/openvz/openvz_conf.c:290 #, fuzzy msgid "Wrong length MAC address" msgstr "잘못된 MAC 주소" #: src/openvz/openvz_conf.c:295 #, c-format msgid "MAC address %s too long for destination" msgstr "" #: src/openvz/openvz_conf.c:300 #, fuzzy msgid "Wrong MAC address" msgstr "MAC 주소" #: src/openvz/openvz_conf.c:371 #, c-format msgid "Could not read 'OSTEMPLATE' from config for container %d" msgstr "" #: src/openvz/openvz_conf.c:385 #, c-format msgid "Could not read 'VE_PRIVATE' from config for container %d" msgstr "" #: src/openvz/openvz_conf.c:446 #, fuzzy msgid "popen failed" msgstr "작업 실패" #: src/openvz/openvz_conf.c:456 src/openvz/openvz_driver.c:154 msgid "Failed to parse vzlist output" msgstr "" #: src/openvz/openvz_conf.c:494 msgid "UUID in config file malformed" msgstr "" #: src/openvz/openvz_conf.c:506 #, fuzzy, c-format msgid "Could not read config for container %d" msgstr "%s 설정 파일 읽기 실패" #: src/openvz/openvz_driver.c:119 #, fuzzy msgid "Container is not defined" msgstr "도메인 %s는 정의되지 않음\n" #: src/openvz/openvz_driver.c:144 #, fuzzy msgid "popen failed" msgstr "작업 실패" #: src/openvz/openvz_driver.c:192 src/openvz/openvz_driver.c:745 #, fuzzy, c-format msgid "Could not put argument to %s" msgstr "%s에 연결할 수 없음" #: src/openvz/openvz_driver.c:215 msgid "only one filesystem supported" msgstr "" #: src/openvz/openvz_driver.c:224 msgid "filesystem is not of type 'template' or 'mount'" msgstr "" #: src/openvz/openvz_driver.c:235 #, fuzzy msgid "Could not convert domain name to VEID" msgstr "도메인명이나 id를 도메인 UUID로 변환" #: src/openvz/openvz_driver.c:241 msgid "Could not copy default config" msgstr "" #: src/openvz/openvz_driver.c:247 msgid "Could not set the source dir for the filesystem" msgstr "" #: src/openvz/openvz_driver.c:255 msgid "Error creating command for container" msgstr "" #: src/openvz/openvz_driver.c:261 src/openvz/openvz_driver.c:732 #: src/openvz/openvz_driver.c:934 src/openvz/openvz_driver.c:989 #: src/openvz/openvz_driver.c:1027 src/openvz/openvz_driver.c:1063 #: src/openvz/openvz_driver.c:1141 src/openvz/openvz_driver.c:1308 #: src/openvz/openvz_driver.c:1354 src/openvz/openvz_driver.c:1452 #, fuzzy, c-format msgid "Could not exec %s" msgstr "%s에 연결할 수 없음" #: src/openvz/openvz_driver.c:406 #, c-format msgid "cannot read cputime for domain %d" msgstr "" #: src/openvz/openvz_driver.c:529 src/openvz/openvz_driver.c:566 #, fuzzy msgid "domain is not in running state" msgstr "도메인이 아직 실행 중" #: src/openvz/openvz_driver.c:646 msgid "Container ID is not specified" msgstr "" #: src/openvz/openvz_driver.c:679 msgid "Could not generate eth name for container" msgstr "" #: src/openvz/openvz_driver.c:690 msgid "Could not generate veth name" msgstr "" #: src/openvz/openvz_driver.c:774 #, fuzzy msgid "Could not configure network" msgstr "%s에 연결할 수 없음" #: src/openvz/openvz_driver.c:785 msgid "cannot replace NETIF config" msgstr "" #: src/openvz/openvz_driver.c:823 #, c-format msgid "Already an OPENVZ VM active with the id '%s'" msgstr "" #: src/openvz/openvz_driver.c:835 src/openvz/openvz_driver.c:917 #, fuzzy msgid "Error creating initial configuration" msgstr "설정 할당 중" #: src/openvz/openvz_driver.c:843 src/openvz/openvz_driver.c:923 #, fuzzy msgid "Could not set UUID" msgstr "%s에 연결할 수 없음" #: src/openvz/openvz_driver.c:853 src/openvz/openvz_driver.c:945 #, fuzzy msgid "Could not set number of virtual cpu" msgstr "가상 CPU 수 변경" #: src/openvz/openvz_driver.c:861 #, fuzzy msgid "Could not set memory size" msgstr "Xen Store에 연결할 수 없음" #: src/openvz/openvz_driver.c:903 #, c-format msgid "Already an OPENVZ VM defined with the id '%s'" msgstr "" #: src/openvz/openvz_driver.c:976 msgid "no domain with matching id" msgstr "" #: src/openvz/openvz_driver.c:982 msgid "domain is not in shutoff state" msgstr "" #: src/openvz/openvz_driver.c:1020 src/qemu/qemu_driver.c:5096 #: src/uml/uml_driver.c:1658 #, fuzzy msgid "cannot delete active domain" msgstr "비활성화 도메인명" #: src/openvz/openvz_driver.c:1094 #, fuzzy msgid "Could not read container config" msgstr "%s에 연결할 수 없음" #: src/openvz/openvz_driver.c:1115 src/qemu/qemu_driver.c:3069 #, fuzzy, c-format msgid "unknown type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/openvz/openvz_driver.c:1167 msgid "VCPUs should be >= 1" msgstr "" #: src/openvz/openvz_driver.c:1212 #, c-format msgid "unexpected OpenVZ URI path '%s', try openvz:///system" msgstr "" #: src/openvz/openvz_driver.c:1219 msgid "OpenVZ control file /proc/vz does not exist" msgstr "" #: src/openvz/openvz_driver.c:1225 msgid "OpenVZ control file /proc/vz is not accessible" msgstr "" #: src/openvz/openvz_driver.c:1317 src/openvz/openvz_driver.c:1363 #, fuzzy, c-format msgid "Could not parse VPS ID %s" msgstr "%s에 연결할 수 없음" #: src/phyp/phyp_driver.c:94 msgid "Missing server name in phyp:// URI" msgstr "" #: src/phyp/phyp_driver.c:100 msgid "Missing managed system name in phyp:// URI" msgstr "" #: src/phyp/phyp_driver.c:106 msgid "Missing username in phyp:// URI" msgstr "" #: src/phyp/phyp_driver.c:153 msgid "Error parsing 'path'. Invalid characters." msgstr "" #: src/phyp/phyp_driver.c:159 msgid "Error while opening SSH session." msgstr "" #: src/phyp/phyp_driver.c:280 #, fuzzy, c-format msgid "Error while getting %s address info" msgstr "드라이버를 다시 불러오는 도중 오류 발생 " #: src/phyp/phyp_driver.c:297 #, fuzzy, c-format msgid "Failed to connect to %s" msgstr "%s에 연결할 수 없음" #: src/phyp/phyp_driver.c:317 msgid "Failure establishing SSH session." msgstr "" #: src/phyp/phyp_driver.c:347 #, fuzzy msgid "No authentication callback provided." msgstr "작업 실패" #: src/phyp/phyp_driver.c:358 msgid "Required credentials are not supported." msgstr "" #: src/phyp/phyp_driver.c:367 msgid "Unable to fetch credentials." msgstr "" #: src/phyp/phyp_driver.c:375 #, fuzzy msgid "Unable to get password certificates" msgstr "설정 파일 쓰기 실패: %s" #: src/phyp/phyp_driver.c:386 #, fuzzy msgid "Authentication failed" msgstr "작업 실패" #: src/qemu/qemu_bridge_filter.c:43 #, fuzzy, c-format msgid "failed to add ebtables rule to set default policy to drop on '%s'" msgstr "%s에서 도메인을 복구하기 실패" #: src/qemu/qemu_bridge_filter.c:59 #, fuzzy, c-format msgid "cannot filter mac addresses on bridge '%s'" msgstr "설정 파일 쓰기 실패: %s" #: src/qemu/qemu_bridge_filter.c:80 src/qemu/qemu_bridge_filter.c:102 #, fuzzy, c-format msgid "failed to add ebtables rule to allow routing to '%s'" msgstr "%s에서 도메인을 복구하기 실패" #: src/qemu/qemu_conf.c:123 #, fuzzy msgid "unable to find hugetlbfs mountpoint" msgstr "도메인 %s를 재부팅하기 실패" #: src/qemu/qemu_conf.c:255 msgid "cgroup_controllers must be a list of strings" msgstr "" #: src/qemu/qemu_conf.c:293 msgid "cgroup_device_acl must be a list of strings" msgstr "" #: src/qemu/qemu_conf.c:337 #, fuzzy, c-format msgid "failed to enable mac filter in in '%s'" msgstr "'%s' 도메인 보기 실패" #: src/qemu/qemu_conf.c:343 #, fuzzy, c-format msgid "failed to add rule to drop all frames in '%s'" msgstr "%s에서 도메인을 복구하기 실패" #: src/qemu/qemu_conf.c:495 msgid "Unable to read 'qemu -M ?' output" msgstr "" #: src/qemu/qemu_conf.c:515 src/qemu/qemu_conf.c:750 src/qemu/qemu_conf.c:1366 #, c-format msgid "Unexpected exit status from qemu %d pid %lu" msgstr "" #: src/qemu/qemu_conf.c:523 src/qemu/qemu_conf.c:758 src/qemu/qemu_conf.c:1374 #, c-format msgid "Unexpected exit status '%d', qemu probably failed" msgstr "" #: src/qemu/qemu_conf.c:718 #, c-format msgid "don't know how to parse %s CPU models" msgstr "" #: src/qemu/qemu_conf.c:729 msgid "Unable to read QEMU supported CPU models" msgstr "" #: src/qemu/qemu_conf.c:838 src/qemu/qemu_conf.c:922 #, fuzzy, c-format msgid "Failed to stat %s, most peculiar : %s" msgstr "도메인 %s 시작하기 실패" #: src/qemu/qemu_conf.c:1309 #, c-format msgid "cannot parse QEMU version number in '%s'" msgstr "" #: src/qemu/qemu_conf.c:1342 msgid "Unable to read QEMU help output" msgstr "" #: src/qemu/qemu_conf.c:1413 src/qemu/qemu_driver.c:2605 #: src/qemu/qemu_driver.c:4787 #, c-format msgid "Cannot find QEMU binary %s" msgstr "" #: src/qemu/qemu_conf.c:1456 #, fuzzy, c-format msgid "Network type %d is not supported" msgstr "%s 네트워크 시작\n" #: src/qemu/qemu_conf.c:1487 src/uml/uml_conf.c:133 #, c-format msgid "Failed to add tap interface to bridge. %s is not a bridge device" msgstr "" #: src/qemu/qemu_conf.c:1491 src/uml/uml_conf.c:137 #, fuzzy, c-format msgid "Failed to add tap interface to bridge '%s'" msgstr "%s %s 인터페이스 상태 보기 실패" #: src/qemu/qemu_conf.c:1495 src/uml/uml_conf.c:141 #, fuzzy, c-format msgid "Failed to add tap interface '%s' to bridge '%s'" msgstr "%s %s 인터페이스 상태 보기 실패" #: src/qemu/qemu_conf.c:1506 #, fuzzy, c-format msgid "failed to add ebtables rule to allow MAC address on '%s'" msgstr "%s에서 도메인을 복구하기 실패" #: src/qemu/qemu_conf.c:1571 #, c-format msgid "cannot convert disk '%s' to bus/device index" msgstr "" #: src/qemu/qemu_conf.c:1600 #, c-format msgid "Unsupported disk name mapping for bus '%s'" msgstr "" #: src/qemu/qemu_conf.c:1664 #, fuzzy msgid "Unable to determine device index for network device" msgstr "%s에서 장치 분리 실패" #: src/qemu/qemu_conf.c:1691 #, fuzzy msgid "Unable to determine device index for hostdevwork device" msgstr "%s에서 장치 분리 실패" #: src/qemu/qemu_conf.c:1803 msgid "Only PCI domain 0 and bus 0 are available" msgstr "" #: src/qemu/qemu_conf.c:1874 #, fuzzy, c-format msgid "unable to reserve PCI address %s" msgstr "'%s' 열기 실패: %s" #: src/qemu/qemu_conf.c:1987 msgid "No more available PCI addresses" msgstr "" #: src/qemu/qemu_conf.c:2061 msgid "Primary video card must have PCI address 0:0:2.0" msgstr "" #: src/qemu/qemu_conf.c:2094 msgid "Primary IDE controller must have PCI address 0:0:1.1" msgstr "" #: src/qemu/qemu_conf.c:2146 msgid "Only PCI device addresses with domain=0 are supported" msgstr "" #: src/qemu/qemu_conf.c:2151 msgid "Only PCI device addresses with bus=0 are supported" msgstr "" #: src/qemu/qemu_conf.c:2156 msgid "Only PCI device addresses with function=0 are supported" msgstr "" #: src/qemu/qemu_conf.c:2181 #, c-format msgid "driver serial '%s' contains unsafe characters" msgstr "" #: src/qemu/qemu_conf.c:2202 src/qemu/qemu_conf.c:2366 #: src/qemu/qemu_conf.c:3572 src/uml/uml_conf.c:475 #, fuzzy, c-format msgid "unsupported disk type '%s'" msgstr "예상외의 데이터 '%s'" #: src/qemu/qemu_conf.c:2210 #, fuzzy msgid "unexpected address type for scsi disk" msgstr "예상외의 mime 유형" #: src/qemu/qemu_conf.c:2219 msgid "SCSI controller only supports 1 bus" msgstr "" #: src/qemu/qemu_conf.c:2229 #, fuzzy msgid "unexpected address type for ide disk" msgstr "예상외의 mime 유형" #: src/qemu/qemu_conf.c:2235 src/qemu/qemu_conf.c:2251 #, c-format msgid "Only 1 %s controller is supported" msgstr "" #: src/qemu/qemu_conf.c:2245 #, fuzzy msgid "unexpected address type for fdc disk" msgstr "예상외의 mime 유형" #: src/qemu/qemu_conf.c:2257 #, c-format msgid "Only 1 %s bus is supported" msgstr "" #: src/qemu/qemu_conf.c:2280 src/qemu/qemu_conf.c:3582 #, fuzzy, c-format msgid "unsupported disk driver type for '%s'" msgstr "예상외의 데이터 '%s'" #: src/qemu/qemu_conf.c:2286 src/qemu/qemu_conf.c:3588 msgid "cannot create virtual FAT disks in read-write mode" msgstr "" #: src/qemu/qemu_conf.c:2393 #, fuzzy, c-format msgid "unsupported disk bus '%s' with device setup" msgstr "예상외의 데이터 '%s'" #: src/qemu/qemu_conf.c:2602 src/qemu/qemu_conf.c:4009 #, fuzzy msgid "missing watchdog model" msgstr "잘못된 인수" #: src/qemu/qemu_conf.c:2655 src/qemu/qemu_conf.c:3979 msgid "invalid sound model" msgstr "" #: src/qemu/qemu_conf.c:2733 src/qemu/qemu_conf.c:2755 #, fuzzy msgid "USB host device is missing bus/device information" msgstr "장치 정보 부재" #: src/qemu/qemu_conf.c:2956 msgid "guest CPU is not compatible with host CPU" msgstr "" #: src/qemu/qemu_conf.c:3099 #, fuzzy msgid "TCP migration is not supported with this QEMU binary" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/qemu/qemu_conf.c:3107 src/qemu/qemu_conf.c:3113 msgid "STDIO migration is not supported with this QEMU binary" msgstr "" #: src/qemu/qemu_conf.c:3268 msgid "hugetlbfs filesystem is not mounted" msgstr "" #: src/qemu/qemu_conf.c:3273 msgid "hugepages are disabled by administrator config" msgstr "" #: src/qemu/qemu_conf.c:3278 #, fuzzy, c-format msgid "hugepage backing not supported by '%s'" msgstr "유형이 %s인 인터페이스를 찾을 수 없음" #: src/qemu/qemu_conf.c:3312 #, fuzzy, c-format msgid "qemu emulator '%s' does not support xen" msgstr "명령 '%s'는 --%s 옵션을 지원하지 않음" #: src/qemu/qemu_conf.c:3417 #, c-format msgid "unsupported driver name '%s' for disk '%s'" msgstr "" #: src/qemu/qemu_conf.c:3437 #, fuzzy msgid "SATA is not supported with this QEMU binary" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/qemu/qemu_conf.c:3486 src/qemu/qemu_conf.c:3553 #, c-format msgid "unsupported usb disk type for '%s'" msgstr "" #: src/qemu/qemu_conf.c:3752 msgid "guestfwd requires QEMU to support -chardev & -device" msgstr "" #: src/qemu/qemu_conf.c:3894 msgid "only one video card is currently supported" msgstr "" #: src/qemu/qemu_conf.c:3905 src/qemu/qemu_conf.c:3931 #, c-format msgid "video type %s is not supported with QEMU" msgstr "" #: src/qemu/qemu_conf.c:4021 #, fuzzy msgid "invalid watchdog action" msgstr "유효하지 않은 연결" #: src/qemu/qemu_conf.c:4065 src/qemu/qemu_monitor_text.c:1390 msgid "PCI device assignment is not supported by this version of qemu" msgstr "" #: src/qemu/qemu_conf.c:4294 #, fuzzy, c-format msgid "malformed keyword arguments in '%s'" msgstr "%s에 있는 잘못된 인수" #: src/qemu/qemu_conf.c:4431 #, c-format msgid "cannot parse drive index '%s'" msgstr "" #: src/qemu/qemu_conf.c:4439 #, fuzzy, c-format msgid "cannot parse drive bus '%s'" msgstr "버스 %s을(를) 구문 분석할 수 없음 " #: src/qemu/qemu_conf.c:4447 #, fuzzy, c-format msgid "cannot parse drive unit '%s'" msgstr "비디오 램 '%s'을 구문 분석할 수 없음 " #: src/qemu/qemu_conf.c:4456 #, fuzzy, c-format msgid "missing file parameter in drive '%s'" msgstr "%s의 장치 정보 부재" #: src/qemu/qemu_conf.c:4469 #, fuzzy, c-format msgid "missing index/unit/bus parameter in drive '%s'" msgstr "%s의 장치 정보 부재" #: src/qemu/qemu_conf.c:4549 #, c-format msgid "cannot parse NIC vlan in '%s'" msgstr "" #: src/qemu/qemu_conf.c:4561 #, c-format msgid "cannot find NIC definition for vlan %d" msgstr "" #: src/qemu/qemu_conf.c:4620 #, c-format msgid "cannot parse vlan in '%s'" msgstr "" #: src/qemu/qemu_conf.c:4650 #, c-format msgid "cannot parse NIC definition '%s'" msgstr "" #: src/qemu/qemu_conf.c:4721 src/qemu/qemu_conf.c:4779 #, c-format msgid "unknown PCI device syntax '%s'" msgstr "" #: src/qemu/qemu_conf.c:4729 src/qemu/qemu_conf.c:4802 #, c-format msgid "cannot extract PCI device bus '%s'" msgstr "" #: src/qemu/qemu_conf.c:4736 #, c-format msgid "cannot extract PCI device slot '%s'" msgstr "" #: src/qemu/qemu_conf.c:4743 #, c-format msgid "cannot extract PCI device function '%s'" msgstr "" #: src/qemu/qemu_conf.c:4788 #, c-format msgid "cannot extract USB device vendor '%s'" msgstr "" #: src/qemu/qemu_conf.c:4795 #, c-format msgid "cannot extract PCI device product '%s'" msgstr "" #: src/qemu/qemu_conf.c:4809 #, c-format msgid "cannot extract PCI device address '%s'" msgstr "" #: src/qemu/qemu_conf.c:4922 #, c-format msgid "cannot find port number in character device %s" msgstr "" #: src/qemu/qemu_conf.c:4962 #, c-format msgid "unknown character device syntax %s" msgstr "" #: src/qemu/qemu_conf.c:5055 #, fuzzy, c-format msgid "unknown CPU syntax '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/qemu/qemu_conf.c:5132 #, fuzzy, c-format msgid "cannot parse CPU topology '%s'" msgstr "도메인 %s을(를) 구문 분석할 수 없음 " #: src/qemu/qemu_conf.c:5161 #, fuzzy msgid "no emulator path found" msgstr "네트워크를 찾을 수 없음" #: src/qemu/qemu_conf.c:5213 #, c-format msgid "missing value for %s argument" msgstr "" #: src/qemu/qemu_conf.c:5258 #, c-format msgid "cannot parse VNC port '%s'" msgstr "" #: src/qemu/qemu_conf.c:5282 #, c-format msgid "cannot parse memory level '%s'" msgstr "" #: src/qemu/qemu_conf.c:5294 #, c-format msgid "cannot parse UUID '%s'" msgstr "" #: src/qemu/qemu_conf.c:5565 #, fuzzy, c-format msgid "unknown video adapter type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/qemu/qemu_conf.c:5590 #, c-format msgid "unknown QEMU argument '%s' during conversion" msgstr "" #: src/qemu/qemu_conf.c:5593 #, fuzzy, c-format msgid "unknown argument '%s'" msgstr "알려지지 않은 명령: '%s'" #: src/qemu/qemu_driver.c:222 msgid "no monitor path" msgstr "" #: src/qemu/qemu_driver.c:249 #, c-format msgid "unsupported monitor type '%s'" msgstr "" #: src/qemu/qemu_driver.c:311 src/qemu/qemu_driver.c:353 #: src/xen/xm_internal.c:496 #, fuzzy msgid "cannot get time of day" msgstr "시간 읽어오는 중" #: src/qemu/qemu_driver.c:324 src/qemu/qemu_driver.c:367 #, fuzzy msgid "cannot acquire state change lock" msgstr "%s 설정 파일 읽기 실패" #: src/qemu/qemu_driver.c:327 src/qemu/qemu_driver.c:370 #, fuzzy msgid "cannot acquire job mutex" msgstr "mutex를 초기화할 수 없음 " #: src/qemu/qemu_driver.c:522 src/qemu/qemu_driver.c:554 #: src/uml/uml_driver.c:859 #, fuzzy, c-format msgid "failed to create logfile %s" msgstr "로그 파일 쓰기 실패" #: src/qemu/qemu_driver.c:528 src/qemu/qemu_driver.c:560 #: src/uml/uml_driver.c:868 msgid "Unable to set VM logfile close-on-exec flag" msgstr "" #: src/qemu/qemu_driver.c:546 #, fuzzy, c-format msgid "failed to build logfile name %s/%s.log" msgstr "로그 파일 쓰기 실패" #: src/qemu/qemu_driver.c:566 #, fuzzy, c-format msgid "Unable to seek to %lld in %s" msgstr "%s 도메인 강제 종료 실패 " #: src/qemu/qemu_driver.c:651 #, fuzzy, c-format msgid "Failed to remove domain XML for %s: %s" msgstr "%s에서 도메인을 복구하기 실패" #: src/qemu/qemu_driver.c:656 #, fuzzy, c-format msgid "Failed to remove PID file for %s: %s" msgstr "%s에서 도메인을 복구하기 실패" #: src/qemu/qemu_driver.c:720 #, fuzzy, c-format msgid "missing for volume %s" msgstr "%s 장치의 소스 정보 부재" #: src/qemu/qemu_driver.c:723 #, c-format msgid "unexpected passphrase request for volume %s" msgstr "" #: src/qemu/qemu_driver.c:748 msgid "cannot find secrets without a connection" msgstr "" #: src/qemu/qemu_driver.c:756 src/storage/storage_backend.c:424 #, fuzzy msgid "secret storage not supported" msgstr "%s 네트워크 시작\n" #: src/qemu/qemu_driver.c:769 #, fuzzy, c-format msgid "invalid for volume %s" msgstr "%s에 있는 잘못된 연결 포인터" #: src/qemu/qemu_driver.c:787 #, c-format msgid "format='qcow' passphrase for %s must not contain a '\\0'" msgstr "" #: src/qemu/qemu_driver.c:833 #, fuzzy, c-format msgid "Failed to connect monitor for %s" msgstr "%s에서 네트워크 생성하기 실패" #: src/qemu/qemu_driver.c:915 #, fuzzy msgid "Failed to start security driver" msgstr "%s 네트워크 시작 실패" #: src/qemu/qemu_driver.c:923 msgid "No security driver available" msgstr "" #: src/qemu/qemu_driver.c:1063 #, fuzzy, c-format msgid "Failed to create state dir '%s': %s" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/qemu/qemu_driver.c:1069 #, fuzzy, c-format msgid "Failed to create lib dir '%s': %s" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/qemu/qemu_driver.c:1075 #, fuzzy, c-format msgid "Failed to create cache dir '%s': %s" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/qemu/qemu_driver.c:1119 #, c-format msgid "unable to set ownership of '%s' to user %d:%d" msgstr "" #: src/qemu/qemu_driver.c:1125 #, fuzzy, c-format msgid "unable to set ownership of '%s' to %d:%d" msgstr "%s에 연결할 수 없음" #: src/qemu/qemu_driver.c:1146 #, fuzzy, c-format msgid "unable to create hugepage path %s" msgstr "%s에서 도메인 생성하기 실패" #: src/qemu/qemu_driver.c:1153 #, fuzzy, c-format msgid "unable to set ownership on %s to %d:%d" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/qemu/qemu_driver.c:1353 #, c-format msgid "Failure while reading %s log output" msgstr "" #: src/qemu/qemu_driver.c:1362 #, c-format msgid "Out of space while reading %s log output" msgstr "" #: src/qemu/qemu_driver.c:1369 #, c-format msgid "Process exited while reading %s log output" msgstr "" #: src/qemu/qemu_driver.c:1382 #, c-format msgid "Timed out while reading %s log output" msgstr "" #: src/qemu/qemu_driver.c:1462 #, fuzzy, c-format msgid "no assigned pty for device %s" msgstr "디스크 장치 부착" #: src/qemu/qemu_driver.c:1558 #, fuzzy, c-format msgid "Unable to close logfile: %s" msgstr "로그 파일 쓰기 실패" #: src/qemu/qemu_driver.c:1565 #, fuzzy, c-format msgid "unable to start guest: %s" msgstr "%s 네트워크 시작 실패" #: src/qemu/qemu_driver.c:1634 #, c-format msgid "got wrong number of vCPU pids from QEMU monitor. got %d, wanted %d" msgstr "" #: src/qemu/qemu_driver.c:1969 #, fuzzy, c-format msgid "cannot find PCI address for VirtIO disk %s" msgstr "디스크 장치 부착" #: src/qemu/qemu_driver.c:1983 #, fuzzy, c-format msgid "cannot find PCI address for %s NIC" msgstr "잘못된 MAC 주소: %s" #: src/qemu/qemu_driver.c:1997 #, fuzzy, c-format msgid "cannot find PCI address for controller %s" msgstr "디스크 장치 부착" #: src/qemu/qemu_driver.c:2011 #, fuzzy, c-format msgid "cannot find PCI address for video adapter %s" msgstr "디스크 장치 부착" #: src/qemu/qemu_driver.c:2025 #, fuzzy, c-format msgid "cannot find PCI address for sound adapter %s" msgstr "설정 파일 쓰기 실패: %s" #: src/qemu/qemu_driver.c:2038 #, fuzzy, c-format msgid "cannot find PCI address for watchdog %s" msgstr "설정 파일 쓰기 실패: %s" #: src/qemu/qemu_driver.c:2266 #, fuzzy, c-format msgid "Failed to re-attach PCI device: %s" msgstr "%s에서 장치 부착하기 실패" #: src/qemu/qemu_driver.c:2286 #, fuzzy, c-format msgid "Failed to allocate pciDeviceList: %s" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/qemu/qemu_driver.c:2305 #, fuzzy, c-format msgid "Failed to reset PCI device: %s" msgstr "%s에서 장치 분리 실패" #: src/qemu/qemu_driver.c:2347 #, fuzzy, c-format msgid "Unable to create cgroup for %s" msgstr "%s에서 도메인 생성하기 실패" #: src/qemu/qemu_driver.c:2361 #, fuzzy, c-format msgid "Unable to deny all devices for %s" msgstr "%s에서 장치 분리 실패" #: src/qemu/qemu_driver.c:2374 #, fuzzy, c-format msgid "Unable to allow device %s for %s" msgstr "%s에서 장치 부착하기 실패" #: src/qemu/qemu_driver.c:2383 msgid "unable to allow /dev/pts/ devices" msgstr "" #: src/qemu/qemu_driver.c:2391 msgid "unable to allow /dev/snd/ devices" msgstr "" #: src/qemu/qemu_driver.c:2402 src/qemu/qemu_driver.c:5967 #, fuzzy, c-format msgid "unable to allow device %s" msgstr "%s에서 장치 부착하기 실패" #: src/qemu/qemu_driver.c:2437 src/qemu/qemu_driver.c:5958 #, fuzzy, c-format msgid "Unable to find cgroup for %s\n" msgstr "네트워크 찾기 실패: %s" #: src/qemu/qemu_driver.c:2460 #, fuzzy, c-format msgid "unable to find cgroup for domain %s" msgstr "도메인 %s를 재부팅하기 실패" #: src/qemu/qemu_driver.c:2468 #, fuzzy, c-format msgid "unable to add domain %s task %d to cgroup" msgstr "자동 시작으로 %s 도메인을 표시하기 실패" #: src/qemu/qemu_driver.c:2556 src/uml/uml_driver.c:823 #, fuzzy msgid "VM is already active" msgstr "이미 도메인이 활성화됨" #: src/qemu/qemu_driver.c:2581 msgid "Unable to find an unused VNC port" msgstr "" #: src/qemu/qemu_driver.c:2589 src/uml/uml_driver.c:845 #, c-format msgid "cannot create log directory %s" msgstr "" #: src/qemu/qemu_driver.c:2638 #, c-format msgid "Cannot remove stale PID file for %s" msgstr "" #: src/qemu/qemu_driver.c:2645 msgid "Failed to build pidfile path." msgstr "" #: src/qemu/qemu_driver.c:2670 src/qemu/qemu_driver.c:2673 #: src/uml/uml_driver.c:883 src/uml/uml_driver.c:886 #, fuzzy, c-format msgid "Unable to write envv to logfile: %s" msgstr "로그 파일 쓰기 실패" #: src/qemu/qemu_driver.c:2680 src/qemu/qemu_driver.c:2683 #: src/qemu/qemu_driver.c:2688 src/uml/uml_driver.c:893 #: src/uml/uml_driver.c:896 src/uml/uml_driver.c:901 #, fuzzy, c-format msgid "Unable to write argv to logfile: %s" msgstr "로그 파일 쓰기 실패" #: src/qemu/qemu_driver.c:2692 #, fuzzy, c-format msgid "Unable to seek to end of logfile: %s" msgstr "로그 파일 쓰기 실패" #: src/qemu/qemu_driver.c:2709 #, fuzzy, c-format msgid "Domain %s didn't show up\n" msgstr "도메인 %s를 %s에 덤프함\n" #: src/qemu/qemu_driver.c:2774 src/qemu/qemu_driver.c:3470 #: src/qemu/qemu_driver.c:8343 #, fuzzy msgid "resume operation failed" msgstr "작업 실패" #: src/qemu/qemu_driver.c:2848 #, fuzzy, c-format msgid "failed to remove ebtables rule to allow MAC address on '%s'" msgstr "%s에서 도메인을 복구하기 실패" #: src/qemu/qemu_driver.c:2857 #, fuzzy, c-format msgid "Failed to send SIGTERM to %s (%d)" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/qemu/qemu_driver.c:2956 msgid "qemu state driver is not active" msgstr "" #: src/qemu/qemu_driver.c:2962 #, c-format msgid "no QEMU URI path given, try %s" msgstr "" #: src/qemu/qemu_driver.c:2973 #, c-format msgid "unexpected QEMU URI path '%s', try qemu:///system" msgstr "" #: src/qemu/qemu_driver.c:2980 #, c-format msgid "unexpected QEMU URI path '%s', try qemu:///session" msgstr "" #: src/qemu/qemu_driver.c:3042 #, fuzzy, c-format msgid "Unable to open %s" msgstr "'%s' 열기 실패: %s" #: src/qemu/qemu_driver.c:3201 src/qemu/qemu_driver.c:3395 #: src/qemu/qemu_driver.c:3451 src/qemu/qemu_driver.c:3510 #: src/qemu/qemu_driver.c:3551 src/qemu/qemu_driver.c:3603 #: src/qemu/qemu_driver.c:3630 src/qemu/qemu_driver.c:3655 #: src/qemu/qemu_driver.c:3687 src/qemu/qemu_driver.c:3744 #: src/qemu/qemu_driver.c:3876 src/qemu/qemu_driver.c:4025 #: src/qemu/qemu_driver.c:4139 src/qemu/qemu_driver.c:4206 #: src/qemu/qemu_driver.c:4271 src/qemu/qemu_driver.c:4355 #: src/qemu/qemu_driver.c:4390 src/qemu/qemu_driver.c:4649 #: src/qemu/qemu_driver.c:4884 src/qemu/qemu_driver.c:5090 #: src/qemu/qemu_driver.c:5931 src/qemu/qemu_driver.c:6411 #: src/qemu/qemu_driver.c:6481 src/qemu/qemu_driver.c:6508 #: src/qemu/qemu_driver.c:6738 src/qemu/qemu_driver.c:6810 #: src/qemu/qemu_driver.c:6868 src/qemu/qemu_driver.c:6907 #: src/qemu/qemu_driver.c:6980 src/qemu/qemu_driver.c:8177 #: src/uml/uml_driver.c:1402 src/uml/uml_driver.c:1427 #: src/uml/uml_driver.c:1460 #, c-format msgid "no domain with matching uuid '%s'" msgstr "" #: src/qemu/qemu_driver.c:3226 src/qemu/qemu_driver.c:8291 #, c-format msgid "no domain with matching name '%s'" msgstr "" #: src/qemu/qemu_driver.c:3661 src/uml/uml_driver.c:1433 msgid "cannot set max memory lower than current memory" msgstr "" #: src/qemu/qemu_driver.c:3693 src/uml/uml_driver.c:1472 msgid "cannot set memory higher than max memory" msgstr "" #: src/qemu/qemu_driver.c:3711 src/uml/uml_driver.c:1466 #, fuzzy msgid "cannot set memory of an active domain" msgstr "비활성화 도메인명" #: src/qemu/qemu_driver.c:3864 #, fuzzy msgid "Invalid save image format specified in configuration file" msgstr "설정 파일 구문 분석 실패" #: src/qemu/qemu_driver.c:3906 src/qemu/qemu_driver.c:8137 #, fuzzy msgid "failed to get domain xml" msgstr "도메인 UUID 보기 실패 " #: src/qemu/qemu_driver.c:3914 src/qemu/qemu_driver.c:4041 #, fuzzy, c-format msgid "failed to create '%s'" msgstr "XML 생성하기 실패" #: src/qemu/qemu_driver.c:3920 #, fuzzy msgid "failed to write save header" msgstr "로그 파일 쓰기 실패" #: src/qemu/qemu_driver.c:3926 #, fuzzy msgid "failed to write xml" msgstr "로그 파일 쓰기 실패" #: src/qemu/qemu_driver.c:3932 src/qemu/qemu_driver.c:4047 #, fuzzy, c-format msgid "unable to save file %s" msgstr "파일 열기 실패" #: src/qemu/qemu_driver.c:4100 msgid "resuming after dump failed" msgstr "" #: src/qemu/qemu_driver.c:4148 #, fuzzy msgid "cannot change vcpu count of an active domain" msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: src/qemu/qemu_driver.c:4154 src/qemu/qemu_driver.c:4361 #: src/qemu/qemu_driver.c:4396 #, c-format msgid "unknown virt type in domain definition '%d'" msgstr "" #: src/qemu/qemu_driver.c:4161 msgid "could not determine max vcpus for the domain" msgstr "" #: src/qemu/qemu_driver.c:4167 #, c-format msgid "" "requested vcpus is greater than max allowable vcpus for the domain: %d > %d" msgstr "" #: src/qemu/qemu_driver.c:4212 src/test/test_driver.c:2191 #, fuzzy msgid "cannot pin vcpus on an inactive domain" msgstr "비활성화 도메인을 정의하지 않음" #: src/qemu/qemu_driver.c:4220 #, c-format msgid "vcpu number out of range %d > %d" msgstr "" #: src/qemu/qemu_driver.c:4239 msgid "cpu affinity is not supported" msgstr "" #: src/qemu/qemu_driver.c:4278 #, fuzzy msgid "cannot list vcpu pinning for an inactive domain" msgstr "비활성화 도메인을 정의하지 않음" #: src/qemu/qemu_driver.c:4309 msgid "cannot get vCPU placement & pCPU time" msgstr "" #: src/qemu/qemu_driver.c:4327 msgid "cpu affinity is not available" msgstr "" #: src/qemu/qemu_driver.c:4419 #, fuzzy msgid "Failed to get security label" msgstr "호스트명 보기 실패" #: src/qemu/qemu_driver.c:4450 #, c-format msgid "security model string exceeds max %d bytes" msgstr "" #: src/qemu/qemu_driver.c:4460 #, c-format msgid "security DOI string exceeds max %d bytes" msgstr "" #: src/qemu/qemu_driver.c:4491 #, fuzzy msgid "cannot read domain image" msgstr "노드 도메인 목록" #: src/qemu/qemu_driver.c:4497 #, fuzzy msgid "failed to read qemu header" msgstr "Xen 데몬에서 읽기 실패" #: src/qemu/qemu_driver.c:4503 msgid "image magic is incorrect" msgstr "" #: src/qemu/qemu_driver.c:4509 #, c-format msgid "image version is not supported (%d > %d)" msgstr "" #: src/qemu/qemu_driver.c:4521 #, fuzzy msgid "failed to read XML" msgstr "XML 생성하기 실패" #: src/qemu/qemu_driver.c:4529 src/qemu/qemu_driver.c:7459 #: src/qemu/qemu_driver.c:7686 #, fuzzy msgid "failed to parse XML" msgstr "XML 생성하기 실패" #: src/qemu/qemu_driver.c:4541 src/qemu/qemu_driver.c:7474 #: src/qemu/qemu_driver.c:7701 #, fuzzy msgid "failed to assign new VM" msgstr "네트워크 UUID 보기 실패" #: src/qemu/qemu_driver.c:4554 #, c-format msgid "Invalid compressed save format %d" msgstr "" #: src/qemu/qemu_driver.c:4566 #, fuzzy, c-format msgid "Failed to start decompression binary %s" msgstr "도메인 %s 시작하기 실패" #: src/qemu/qemu_driver.c:4604 #, fuzzy msgid "failed to resume domain" msgstr "도메인 %s를 다시 시작하기 실패" #: src/qemu/qemu_driver.c:4699 src/qemu/qemu_driver.c:4737 #: src/xen/xen_driver.c:1182 src/xen/xen_driver.c:1223 #, c-format msgid "unsupported config type %s" msgstr "" #: src/qemu/qemu_driver.c:4796 src/qemu/qemu_driver.c:7495 #, c-format msgid "Cannot determine QEMU argv syntax %s" msgstr "" #: src/qemu/qemu_driver.c:4893 #, fuzzy msgid "domain is already running" msgstr "이미 도메인이 실행 중" #: src/qemu/qemu_driver.c:5148 #, c-format msgid "No device with bus '%s' and target '%s'" msgstr "" #: src/qemu/qemu_driver.c:5156 src/qemu/qemu_driver.c:6766 #, fuzzy, c-format msgid "missing disk device alias name for %s" msgstr "%s의 장치 정보 부재" #: src/qemu/qemu_driver.c:5163 #, fuzzy, c-format msgid "Removable media not supported for %s device" msgstr "xen 버스는 %s 입력 장치를 지원하지 않음 " #: src/qemu/qemu_driver.c:5232 src/qemu/qemu_driver.c:5427 #: src/qemu/qemu_driver.c:5533 #, c-format msgid "target %s already exists" msgstr "" #: src/qemu/qemu_driver.c:5323 #, fuzzy, c-format msgid "target %s:%d already exists" msgstr "이미 %s 도메인이 존재함" #: src/qemu/qemu_driver.c:5441 #, fuzzy, c-format msgid "unexpected disk address type %s" msgstr "예상외의 mime 유형" #: src/qemu/qemu_driver.c:5464 #, c-format msgid "SCSI controller %d was missing its PCI address" msgstr "" #: src/qemu/qemu_driver.c:5545 #, fuzzy msgid "disk source path is missing" msgstr "장치의 소스 정보 부재" #: src/qemu/qemu_driver.c:5616 msgid "installed qemu version does not support host_net_add" msgstr "" #: src/qemu/qemu_driver.c:5624 #, c-format msgid "" "network device type '%s' cannot be attached: qemu is not using a unix socket " "monitor" msgstr "" #: src/qemu/qemu_driver.c:5651 #, fuzzy msgid "Unable to attach network devices without vlan" msgstr "%s에서 장치 부착하기 실패" #: src/qemu/qemu_driver.c:5716 #, fuzzy msgid "Unable to remove network backend" msgstr "%s에서 네트워크 생성하기 실패" #: src/qemu/qemu_driver.c:5723 #, fuzzy, c-format msgid "Failed to remove network backend for vlan %d, net %s" msgstr "%s에서 네트워크 생성하기 실패" #: src/qemu/qemu_driver.c:5734 #, fuzzy, c-format msgid "Failed to close tapfd with '%s'" msgstr "소켓 %d를 닫기 실패\n" #: src/qemu/qemu_driver.c:5873 src/qemu/qemu_driver.c:6374 #, c-format msgid "hostdev mode '%s' not supported" msgstr "" #: src/qemu/qemu_driver.c:5898 src/qemu/qemu_driver.c:6385 #, c-format msgid "hostdev subsys type '%s' not supported" msgstr "" #: src/qemu/qemu_driver.c:5940 #, fuzzy msgid "cannot attach device on inactive domain" msgstr "비활성화 도메인을 정의하지 않음" #: src/qemu/qemu_driver.c:5999 #, c-format msgid "disk bus '%s' cannot be hotplugged." msgstr "" #: src/qemu/qemu_driver.c:6007 #, c-format msgid "disk device type '%s' cannot be hotplugged" msgstr "" #: src/qemu/qemu_driver.c:6021 #, c-format msgid "disk controller bus '%s' cannot be hotplugged." msgstr "" #: src/qemu/qemu_driver.c:6037 #, c-format msgid "device type '%s' cannot be attached" msgstr "" #: src/qemu/qemu_driver.c:6078 #, fuzzy, c-format msgid "disk %s not found" msgstr "도메인을 찾을 수 없음" #: src/qemu/qemu_driver.c:6085 src/qemu/qemu_driver.c:6151 #: src/qemu/qemu_driver.c:6217 src/qemu/qemu_driver.c:6316 msgid "device cannot be detached without a PCI address" msgstr "" #: src/qemu/qemu_driver.c:6142 #, fuzzy, c-format msgid "disk controller %s:%d not found" msgstr "도메인을 찾을 수 없음" #: src/qemu/qemu_driver.c:6207 #, c-format msgid "network device %02x:%02x:%02x:%02x:%02x:%02x not found" msgstr "" #: src/qemu/qemu_driver.c:6223 #, fuzzy msgid "unable to determine original VLAN" msgstr "호스트명 보기 실패" #: src/qemu/qemu_driver.c:6251 #, fuzzy, c-format msgid "failed to remove ebtables rule on '%s'" msgstr "%s에서 도메인을 복구하기 실패" #: src/qemu/qemu_driver.c:6305 #, c-format msgid "host pci device %.4x:%.2x:%.2x.%.1x not found" msgstr "" #: src/qemu/qemu_driver.c:6420 #, fuzzy msgid "cannot detach device on inactive domain" msgstr "비활성화 도메인을 정의하지 않음" #: src/qemu/qemu_driver.c:6441 #, c-format msgid "disk controller bus '%s' cannot be hotunplugged." msgstr "" #: src/qemu/qemu_driver.c:6449 msgid "This type of device cannot be hot unplugged" msgstr "" #: src/qemu/qemu_driver.c:6514 src/uml/uml_driver.c:1728 #, fuzzy msgid "cannot set autostart for transient domain" msgstr "자동으로 도메인 시작" #: src/qemu/qemu_driver.c:6531 src/storage/storage_driver.c:1021 #: src/uml/uml_driver.c:1745 #, c-format msgid "cannot create autostart directory %s" msgstr "" #: src/qemu/qemu_driver.c:6617 src/qemu/qemu_driver.c:6688 #, c-format msgid "cannot find cgroup for domain %s" msgstr "" #: src/qemu/qemu_driver.c:6628 msgid "invalid type for cpu_shares tunable, expected a 'ullong'" msgstr "" #: src/qemu/qemu_driver.c:6635 msgid "unable to set cpu shares tunable" msgstr "" #: src/qemu/qemu_driver.c:6695 #, fuzzy msgid "unable to get cpu shares tunable" msgstr "호스트명 보기 실패" #: src/qemu/qemu_driver.c:6702 msgid "Field cpu_shares too long for destination" msgstr "" #: src/qemu/qemu_driver.c:6760 src/test/test_driver.c:2602 #, fuzzy, c-format msgid "invalid path: %s" msgstr "%s에 있는 잘못된 인수" #: src/qemu/qemu_driver.c:6833 src/test/test_driver.c:2657 #, c-format msgid "invalid path, '%s' is not a known interface" msgstr "" #: src/qemu/qemu_driver.c:6913 src/uml/uml_driver.c:1802 msgid "NULL or empty path" msgstr "" #: src/qemu/qemu_driver.c:6932 #, fuzzy, c-format msgid "%s: failed to open" msgstr "파일 열기 실패" #: src/qemu/qemu_driver.c:6943 #, fuzzy, c-format msgid "%s: failed to seek or read" msgstr "읽기 용 %s 열기 실패" #: src/qemu/qemu_driver.c:6950 src/uml/uml_driver.c:1839 #, fuzzy msgid "invalid path" msgstr "잘못된 인수" #: src/qemu/qemu_driver.c:7007 #, c-format msgid "mkstemp(\"%s\") failed" msgstr "" #: src/qemu/qemu_driver.c:7029 #, fuzzy, c-format msgid "failed to read temporary file created with template %s" msgstr "%s 설정 파일 읽기 실패" #: src/qemu/qemu_driver.c:7162 src/qemu/qemu_driver.c:7199 #: src/qemu/qemu_driver.c:7265 src/qemu/qemu_driver.c:7381 msgid "stream is not open" msgstr "" #: src/qemu/qemu_driver.c:7169 src/qemu/qemu_driver.c:7206 msgid "stream does not have a callback registered" msgstr "" #: src/qemu/qemu_driver.c:7272 msgid "stream already has a callback registered" msgstr "" #: src/qemu/qemu_driver.c:7282 msgid "cannot register file watch on stream" msgstr "" #: src/qemu/qemu_driver.c:7397 #, fuzzy msgid "cannot write to stream" msgstr "설정 파일 쓰기 실패: %s" #: src/qemu/qemu_driver.c:7441 src/qemu/qemu_driver.c:7609 #, fuzzy msgid "no domain XML passed" msgstr "노드 도메인 목록" #: src/qemu/qemu_driver.c:7446 msgid "PrepareTunnel called but no TUNNELLED flag set" msgstr "" #: src/qemu/qemu_driver.c:7451 msgid "tunnelled migration requested but NULL stream passed" msgstr "" #: src/qemu/qemu_driver.c:7505 msgid "Destination qemu is too old to support tunnelled migration" msgstr "" #: src/qemu/qemu_driver.c:7537 #, c-format msgid "cannot open unix socket '%s' for tunnelled migration" msgstr "" #: src/qemu/qemu_driver.c:7603 msgid "Tunnelled migration requested but invalid RPC method called" msgstr "" #: src/qemu/qemu_driver.c:7650 msgid "only tcp URIs are supported for KVM/QEMU migrations" msgstr "" #: src/qemu/qemu_driver.c:7673 msgid "URI ended with incorrect ':port'" msgstr "" #: src/qemu/qemu_driver.c:7785 #, fuzzy, c-format msgid "cannot parse URI %s" msgstr "버스 %s을(를) 구문 분석할 수 없음 " #: src/qemu/qemu_driver.c:7816 msgid "migrate did not successfully complete" msgstr "" #: src/qemu/qemu_driver.c:7841 msgid "tunnelled migration failed to read from qemu" msgstr "" #: src/qemu/qemu_driver.c:7850 #, fuzzy msgid "Failed to write migration data to remote libvirtd" msgstr "소켓 %d에 쓰기 실패\n" #: src/qemu/qemu_driver.c:7908 #, fuzzy msgid "cannot open tunnelled migration socket" msgstr "노드 cpu 소켓" #: src/qemu/qemu_driver.c:7916 #, c-format msgid "Unix socket '%s' too big for destination" msgstr "" #: src/qemu/qemu_driver.c:7923 #, c-format msgid "Cannot bind to unix socket '%s' for tunnelled migration" msgstr "" #: src/qemu/qemu_driver.c:7929 #, c-format msgid "Cannot listen on unix socket '%s' for tunnelled migration" msgstr "" #: src/qemu/qemu_driver.c:7937 #, fuzzy, c-format msgid "Cannot extract Qemu version from '%s'" msgstr "%s에 연결할 수 없음" #: src/qemu/qemu_driver.c:7945 msgid "Source qemu is too old to support tunnelled migration" msgstr "" #: src/qemu/qemu_driver.c:7981 msgid "tunnelled migration monitor command failed" msgstr "" #: src/qemu/qemu_driver.c:8004 #, fuzzy msgid "migrate failed" msgstr "작업 실패: %s" #: src/qemu/qemu_driver.c:8013 msgid "tunnelled migration failed to accept from qemu" msgstr "" #: src/qemu/qemu_driver.c:8124 #, fuzzy, c-format msgid "Failed to connect to remote libvirt URI %s" msgstr "%s에 연결할 수 없음" #: src/qemu/qemu_driver.c:8130 msgid "Destination libvirt does not support peer-to-peer migration protocol" msgstr "" #: src/qemu/qemu_driver.c:8244 #, fuzzy, c-format msgid "Failed to resume guest %s after failure" msgstr "도메인 %s를 다시 시작하기 실패" #: src/qemu/qemu_driver.c:8427 src/xen/xen_driver.c:1707 #, c-format msgid "device %s is not a PCI device" msgstr "" #: src/qemu/qemu_driver.c:8523 #, fuzzy msgid "cannot get host CPU capabilities" msgstr "기능 전환 실패" #: src/qemu/qemu_monitor.c:236 #, fuzzy msgid "failed to create socket" msgstr "소켓 %d에 읽기 실패\n" #: src/qemu/qemu_monitor.c:244 #, c-format msgid "Monitor path %s too big for destination" msgstr "" #: src/qemu/qemu_monitor.c:261 #, fuzzy msgid "failed to connect to monitor socket" msgstr "Xen Store에 연결 실패" #: src/qemu/qemu_monitor.c:268 msgid "monitor socket did not show up." msgstr "" #: src/qemu/qemu_monitor.c:286 #, c-format msgid "Unable to open monitor path %s" msgstr "" #: src/qemu/qemu_monitor.c:537 #, c-format msgid "unhandled fd event %d for monitor fd %d" msgstr "" #: src/qemu/qemu_monitor.c:573 msgid "EOF notify callback must be supplied" msgstr "" #: src/qemu/qemu_monitor.c:584 #, fuzzy msgid "cannot initialize monitor mutex" msgstr "mutex를 초기화할 수 없음 " #: src/qemu/qemu_monitor.c:590 #, fuzzy msgid "cannot initialize monitor condition" msgstr "상태 변수를 초기화할 수 없음 " #: src/qemu/qemu_monitor.c:614 #, fuzzy, c-format msgid "unable to handle monitor type: %s" msgstr "네트워크 찾기 실패: %s" #: src/qemu/qemu_monitor.c:623 msgid "Unable to set monitor close-on-exec flag" msgstr "" #: src/qemu/qemu_monitor.c:628 msgid "Unable to put monitor into non-blocking mode" msgstr "" #: src/qemu/qemu_monitor.c:640 #, fuzzy msgid "unable to register monitor events" msgstr "소켓 %d에 쓰기 실패\n" #: src/qemu/qemu_monitor_json.c:219 #, fuzzy, c-format msgid "cannot parse JSON doc '%s'" msgstr "'%s' 도메인 보기 실패" #: src/qemu/qemu_monitor_json.c:226 src/qemu/qemu_monitor_text.c:254 #, fuzzy, c-format msgid "cannot send monitor command '%s'" msgstr "알려지지 않은 명령: '%s'" #: src/qemu/qemu_monitor_json.c:256 msgid "Missing QEMU error klass" msgstr "" #: src/qemu/qemu_monitor_json.c:273 src/qemu/qemu_monitor_json.c:293 #, fuzzy, c-format msgid "error running QEMU command '%s': '%s'" msgstr "알려지지 않은 명령: '%s'" #: src/qemu/qemu_monitor_json.c:279 #, c-format msgid "error running QEMU command '%s': %s ('%s')" msgstr "" #: src/qemu/qemu_monitor_json.c:335 #, fuzzy msgid "cannot query time of day" msgstr "시간 읽어오는 중" #: src/qemu/qemu_monitor_json.c:384 #, c-format msgid "argument key '%s' is too short, missing type prefix" msgstr "" #: src/qemu/qemu_monitor_json.c:433 #, fuzzy, c-format msgid "unsupported data type '%c' for arg '%s'" msgstr "예상외의 데이터 '%s'" #: src/qemu/qemu_monitor_json.c:555 msgid "cpu reply was missing return data" msgstr "" #: src/qemu/qemu_monitor_json.c:561 msgid "cpu information was not an array" msgstr "" #: src/qemu/qemu_monitor_json.c:567 #, fuzzy msgid "cpu information was empty" msgstr "도메인 vcpu 정보" #: src/qemu/qemu_monitor_json.c:582 src/qemu/qemu_monitor_json.c:1609 msgid "character device information was missing aray element" msgstr "" #: src/qemu/qemu_monitor_json.c:588 #, fuzzy msgid "cpu information was missing cpu number" msgstr "도메인 정보가 완료되지 않음, 이름 부재" #: src/qemu/qemu_monitor_json.c:594 msgid "cpu information was missing thread ID" msgstr "" #: src/qemu/qemu_monitor_json.c:600 #, fuzzy, c-format msgid "unexpected cpu index %d expecting %d" msgstr "예상외의 dict 노드" #: src/qemu/qemu_monitor_json.c:680 msgid "info balloon reply was missing return data" msgstr "" #: src/qemu/qemu_monitor_json.c:687 msgid "info balloon reply was missing balloon data" msgstr "" #: src/qemu/qemu_monitor_json.c:737 msgid "blockstats reply was missing device list" msgstr "" #: src/qemu/qemu_monitor_json.c:747 src/qemu/qemu_monitor_json.c:753 msgid "blockstats device entry was not in expected format" msgstr "" #: src/qemu/qemu_monitor_json.c:764 msgid "blockstats stats entry was not in expected format" msgstr "" #: src/qemu/qemu_monitor_json.c:770 src/qemu/qemu_monitor_json.c:776 #: src/qemu/qemu_monitor_json.c:782 src/qemu/qemu_monitor_json.c:788 #, fuzzy, c-format msgid "cannot read %s statistic" msgstr "내부 오류 %s" #: src/qemu/qemu_monitor_json.c:796 #, fuzzy, c-format msgid "cannot find statistics for device '%s'" msgstr "디스크 장치 부착" #: src/qemu/qemu_monitor_json.c:1011 msgid "info migration reply was missing return data" msgstr "" #: src/qemu/qemu_monitor_json.c:1017 msgid "info migration reply was missing return status" msgstr "" #: src/qemu/qemu_monitor_json.c:1023 src/qemu/qemu_monitor_text.c:989 #, fuzzy, c-format msgid "unexpected migration status in %s" msgstr "예상외의 mime 유형" #: src/qemu/qemu_monitor_json.c:1031 msgid "migration was active, but no RAM info was set" msgstr "" #: src/qemu/qemu_monitor_json.c:1037 msgid "migration was active, but RAM 'transferred' data was missing" msgstr "" #: src/qemu/qemu_monitor_json.c:1042 msgid "migration was active, but RAM 'remaining' data was missing" msgstr "" #: src/qemu/qemu_monitor_json.c:1047 msgid "migration was active, but RAM 'total' data was missing" msgstr "" #: src/qemu/qemu_monitor_json.c:1303 msgid "pci_add reply was missing device address" msgstr "" #: src/qemu/qemu_monitor_json.c:1309 msgid "pci_add reply was missing device domain number" msgstr "" #: src/qemu/qemu_monitor_json.c:1315 msgid "pci_add reply was missing device bus number" msgstr "" #: src/qemu/qemu_monitor_json.c:1321 msgid "pci_add reply was missing device slot number" msgstr "" #: src/qemu/qemu_monitor_json.c:1327 msgid "pci_add reply was missing device function number" msgstr "" #: src/qemu/qemu_monitor_json.c:1593 msgid "character device reply was missing return data" msgstr "" #: src/qemu/qemu_monitor_json.c:1599 msgid "character device information was not an array" msgstr "" #: src/qemu/qemu_monitor_json.c:1615 src/qemu/qemu_monitor_json.c:1621 #, fuzzy msgid "character device information was missing filename" msgstr "도메인 정보가 완료되지 않음, 이름 부재" #: src/qemu/qemu_monitor_json.c:1634 src/qemu/qemu_monitor_text.c:1757 #, fuzzy, c-format msgid "failed to save chardev path '%s'" msgstr "XML 생성하기 실패" #: src/qemu/qemu_monitor_json.c:1722 msgid "drive_add reply was missing device address" msgstr "" #: src/qemu/qemu_monitor_json.c:1728 msgid "drive_add reply was missing device bus number" msgstr "" #: src/qemu/qemu_monitor_json.c:1734 msgid "drive_add reply was missing device unit number" msgstr "" #: src/qemu/qemu_monitor_json.c:1785 msgid "query-pci not suppported in JSON mode" msgstr "" #: src/qemu/qemu_monitor_text.c:370 msgid "cannot stop CPU execution" msgstr "" #: src/qemu/qemu_monitor_text.c:383 #, fuzzy msgid "system shutdown operation failed" msgstr "작업 실패" #: src/qemu/qemu_monitor_text.c:402 msgid "cannot run monitor command to fetch CPU thread info" msgstr "" #: src/qemu/qemu_monitor_text.c:554 #, fuzzy msgid "could not query memory balloon allocation" msgstr "메모리 할당 변경" #: src/qemu/qemu_monitor_text.c:564 #, fuzzy, c-format msgid "could not parse memory balloon allocation from '%s'" msgstr "%s에 연결할 수 없음" #: src/qemu/qemu_monitor_text.c:591 #, fuzzy msgid "could not query memory balloon statistics" msgstr "메모리 할당 변경" #: src/qemu/qemu_monitor_text.c:622 msgid "'info blockstats' command failed" msgstr "" #: src/qemu/qemu_monitor_text.c:634 msgid "'info blockstats' not supported by this qemu" msgstr "" #: src/qemu/qemu_monitor_text.c:698 #, fuzzy, c-format msgid "no stats found for device %s" msgstr "디스크 장치 부착" #: src/qemu/qemu_monitor_text.c:745 msgid "setting VNC password failed" msgstr "" #: src/qemu/qemu_monitor_text.c:774 #, fuzzy msgid "could not balloon memory allocation" msgstr "메모리 할당 변경" #: src/qemu/qemu_monitor_text.c:807 src/qemu/qemu_monitor_text.c:851 #, fuzzy, c-format msgid "could not eject media on %s" msgstr "%s에 연결할 수 없음" #: src/qemu/qemu_monitor_text.c:816 src/qemu/qemu_monitor_text.c:860 #, fuzzy, c-format msgid "could not eject media on %s: %s" msgstr "%s에 연결할 수 없음" #: src/qemu/qemu_monitor_text.c:896 #, c-format msgid "could save memory region to '%s'" msgstr "" #: src/qemu/qemu_monitor_text.c:943 #, fuzzy msgid "could restrict migration speed" msgstr "인터페이스 정보 보기 실패" #: src/qemu/qemu_monitor_text.c:978 msgid "cannot query migration status" msgstr "" #: src/qemu/qemu_monitor_text.c:1002 #, c-format msgid "cannot parse migration data transferred statistic %s" msgstr "" #: src/qemu/qemu_monitor_text.c:1013 #, c-format msgid "cannot parse migration data remaining statistic %s" msgstr "" #: src/qemu/qemu_monitor_text.c:1024 #, c-format msgid "cannot parse migration data total statistic %s" msgstr "" #: src/qemu/qemu_monitor_text.c:1068 #, fuzzy, c-format msgid "unable to start migration to %s" msgstr "%s 네트워크 시작 실패" #: src/qemu/qemu_monitor_text.c:1075 #, fuzzy, c-format msgid "migration to '%s' failed: %s" msgstr "작업 실패: %s" #: src/qemu/qemu_monitor_text.c:1082 #, fuzzy, c-format msgid "migration to '%s' not supported by this qemu: %s" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/qemu/qemu_monitor_text.c:1179 msgid "cannot run monitor command to cancel migration" msgstr "" #: src/qemu/qemu_monitor_text.c:1208 msgid "cannot run monitor command to add usb disk" msgstr "" #: src/qemu/qemu_monitor_text.c:1216 #, fuzzy, c-format msgid "unable to add USB disk %s: %s" msgstr "'%s' 열기 실패: %s" #: src/qemu/qemu_monitor_text.c:1243 #, fuzzy msgid "cannot attach usb device" msgstr "디스크 장치 부착" #: src/qemu/qemu_monitor_text.c:1251 #, fuzzy msgid "adding usb device failed" msgstr "호스트 정의 파일을 읽어오는중" #: src/qemu/qemu_monitor_text.c:1322 #, fuzzy, c-format msgid "Unable to parse domain number '%s'" msgstr "'%s' 도메인 보기 실패" #: src/qemu/qemu_monitor_text.c:1327 src/qemu/qemu_monitor_text.c:1345 #, c-format msgid "Expected ', ' parsing pci_add reply '%s'" msgstr "" #: src/qemu/qemu_monitor_text.c:1334 #, c-format msgid "Expected 'bus ' parsing pci_add reply '%s'" msgstr "" #: src/qemu/qemu_monitor_text.c:1340 #, fuzzy, c-format msgid "Unable to parse bus number '%s'" msgstr "'%s' 네트워크 보기 실패" #: src/qemu/qemu_monitor_text.c:1351 #, c-format msgid "Expected 'slot ' parsing pci_add reply '%s'" msgstr "" #: src/qemu/qemu_monitor_text.c:1357 #, fuzzy, c-format msgid "Unable to parse slot number '%s'" msgstr "'%s' 네트워크 보기 실패" #: src/qemu/qemu_monitor_text.c:1384 #, fuzzy msgid "cannot attach host pci device" msgstr "디스크 장치 부착" #: src/qemu/qemu_monitor_text.c:1396 src/qemu/qemu_monitor_text.c:1483 #, c-format msgid "parsing pci_add reply failed: %s" msgstr "" #: src/qemu/qemu_monitor_text.c:1435 #, fuzzy, c-format msgid "cannot attach %s disk %s" msgstr "디스크 장치 부착" #: src/qemu/qemu_monitor_text.c:1448 #, fuzzy, c-format msgid "adding %s disk failed %s: %s" msgstr "작업 실패: %s" #: src/qemu/qemu_monitor_text.c:1477 #, fuzzy, c-format msgid "failed to add NIC with '%s'" msgstr "'%s' 도메인 보기 실패" #: src/qemu/qemu_monitor_text.c:1521 #, fuzzy msgid "failed to remove PCI device" msgstr "%s에서 장치 분리 실패" #: src/qemu/qemu_monitor_text.c:1540 #, c-format msgid "failed to detach PCI device, invalid address %.4x:%.2x:%.2x: %s" msgstr "" #: src/qemu/qemu_monitor_text.c:1569 #, fuzzy, c-format msgid "failed to pass fd to qemu with '%s'" msgstr "'%s' 도메인 보기 실패" #: src/qemu/qemu_monitor_text.c:1577 #, fuzzy, c-format msgid "qemu does not support sending of file handles: %s" msgstr "호스트명 보기 실패" #: src/qemu/qemu_monitor_text.c:1605 src/qemu/qemu_monitor_text.c:1641 #: src/qemu/qemu_monitor_text.c:1891 src/qemu/qemu_monitor_text.c:2111 #, fuzzy, c-format msgid "failed to close fd in qemu with '%s'" msgstr "'%s' 도메인 보기 실패" #: src/qemu/qemu_monitor_text.c:1613 #, fuzzy, c-format msgid "qemu does not support closing of file handles: %s" msgstr "%s 설정 파일 읽기 실패" #: src/qemu/qemu_monitor_text.c:1671 #, fuzzy, c-format msgid "failed to remove host network in qemu with '%s'" msgstr "%s에서 네트워크 생성하기 실패" #: src/qemu/qemu_monitor_text.c:1706 #, fuzzy msgid "failed to retrieve chardev info in qemu with 'info chardev'" msgstr "%s에서 네트워크 생성하기 실패" #: src/qemu/qemu_monitor_text.c:1791 #, fuzzy, c-format msgid "cannot attach %s disk controller" msgstr "디스크 장치 부착" #: src/qemu/qemu_monitor_text.c:1804 #, fuzzy, c-format msgid "adding %s disk controller failed: %s" msgstr "작업 실패: %s" #: src/qemu/qemu_monitor_text.c:1836 #, fuzzy, c-format msgid "Unable to parse bus '%s'" msgstr "'%s' 네트워크 보기 실패" #: src/qemu/qemu_monitor_text.c:1841 #, c-format msgid "Expected ', ' parsing drive_add reply '%s'" msgstr "" #: src/qemu/qemu_monitor_text.c:1848 #, c-format msgid "Expected 'unit ' parsing drive_add reply '%s'" msgstr "" #: src/qemu/qemu_monitor_text.c:1854 #, fuzzy, c-format msgid "Unable to parse unit number '%s'" msgstr "'%s' 네트워크 보기 실패" #: src/qemu/qemu_monitor_text.c:1903 #, fuzzy, c-format msgid "adding %s disk failed: %s" msgstr "작업 실패: %s" #: src/qemu/qemu_monitor_text.c:1958 #, fuzzy, c-format msgid "cannot parse value for %s" msgstr "vnc 포트 %s을(를) 구문 분석할 수 없음 " #: src/qemu/qemu_monitor_text.c:1976 #, fuzzy msgid "cannot query PCI addresses" msgstr "잘못된 MAC 주소: %s" #: src/qemu/qemu_monitor_text.c:2068 #, fuzzy, c-format msgid "cannot attach %s device" msgstr "디스크 장치 부착" #: src/qemu/qemu_monitor_text.c:2074 #, fuzzy, c-format msgid "adding %s device failed: %s" msgstr "작업 실패: %s" #: src/qemu/qemu_security_dac.c:71 #, fuzzy, c-format msgid "unable to set security context '%d:%d' on '%s'" msgstr "%s에 연결할 수 없음" #: src/qemu/qemu_security_dac.c:92 src/security/security_selinux.c:367 #, c-format msgid "cannot resolve symlink %s" msgstr "" #: src/qemu/qemu_security_dac.c:419 #, c-format msgid "cannot change to '%d' group" msgstr "" #: src/qemu/qemu_security_dac.c:427 #, c-format msgid "cannot change to '%d' user" msgstr "" #: src/remote/remote_driver.c:329 #, fuzzy msgid "failed to find libvirtd binary" msgstr "네트워크 찾기 실패" #: src/remote/remote_driver.c:411 msgid "" "remote_open: transport in URL not recognised (should be tls|unix|ssh|ext|tcp)" msgstr "" #: src/remote/remote_driver.c:569 msgid "remote_open: for 'ext' transport, command is required" msgstr "" #: src/remote/remote_driver.c:592 src/xen/xend_internal.c:812 #, fuzzy, c-format msgid "unable to resolve hostname '%s': %s" msgstr "'%s' 열기 실패: %s" #: src/remote/remote_driver.c:643 #, fuzzy, c-format msgid "unable to connect to libvirtd at '%s'" msgstr "%s에 연결할 수 없음" #: src/remote/remote_driver.c:689 #, c-format msgid "Socket %s too big for destination" msgstr "" #: src/remote/remote_driver.c:700 #, fuzzy msgid "unable to create socket" msgstr "소켓 %d에 읽기 실패\n" #: src/remote/remote_driver.c:724 #, fuzzy, c-format msgid "unable to connect to '%s'" msgstr "%s에 연결할 수 없음" #: src/remote/remote_driver.c:792 #, fuzzy msgid "unable to create socket pair" msgstr "소켓 %d에 읽기 실패\n" #: src/remote/remote_driver.c:816 msgid "transport methods unix, ssh and ext are not supported under Windows" msgstr "" #: src/remote/remote_driver.c:825 msgid "unable to make socket non-blocking" msgstr "" #: src/remote/remote_driver.c:831 msgid "unable to make pipe" msgstr "" #: src/remote/remote_driver.c:865 #, fuzzy msgid "unable to auto-detect URI" msgstr "URI 보기 실패" #: src/remote/remote_driver.c:1107 #, c-format msgid "Cannot access %s '%s'" msgstr "" #: src/remote/remote_driver.c:1129 #, fuzzy, c-format msgid "unable to allocate TLS credentials: %s" msgstr "노드 할당 실패" #: src/remote/remote_driver.c:1149 #, c-format msgid "unable to load CA certificate: %s" msgstr "" #: src/remote/remote_driver.c:1164 #, c-format msgid "unable to load private key/certificate: %s" msgstr "" #: src/remote/remote_driver.c:1193 #, c-format msgid "unable to initialize TLS client: %s" msgstr "" #: src/remote/remote_driver.c:1202 #, c-format msgid "unable to set TLS algorithm priority: %s" msgstr "" #: src/remote/remote_driver.c:1211 #, c-format msgid "unable to set certificate priority: %s" msgstr "" #: src/remote/remote_driver.c:1221 #, c-format msgid "unable to set session credentials: %s" msgstr "" #: src/remote/remote_driver.c:1236 #, c-format msgid "unable to complete TLS handshake: %s" msgstr "" #: src/remote/remote_driver.c:1258 #, c-format msgid "unable to complete TLS initialization: %s" msgstr "" #: src/remote/remote_driver.c:1264 msgid "server verification (of our certificate or IP address) failed\n" msgstr "" #: src/remote/remote_driver.c:1289 #, fuzzy, c-format msgid "unable to verify server certificate: %s" msgstr "현재 메모리 크기를 확인할 수 없음" #: src/remote/remote_driver.c:1296 msgid "cannot get current time" msgstr "" #: src/remote/remote_driver.c:1301 #, fuzzy msgid "Invalid certificate" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: src/remote/remote_driver.c:1304 msgid "The certificate is not trusted." msgstr "" #: src/remote/remote_driver.c:1307 msgid "The certificate hasn't got a known issuer." msgstr "" #: src/remote/remote_driver.c:1310 msgid "The certificate has been revoked." msgstr "" #: src/remote/remote_driver.c:1314 msgid "The certificate uses an insecure algorithm" msgstr "" #: src/remote/remote_driver.c:1318 #, c-format msgid "server certificate failed validation: %s" msgstr "" #: src/remote/remote_driver.c:1324 msgid "Certificate type is not X.509" msgstr "" #: src/remote/remote_driver.c:1329 msgid "gnutls_certificate_get_peers failed" msgstr "" #: src/remote/remote_driver.c:1339 #, c-format msgid "unable to initialize certificate: %s" msgstr "" #: src/remote/remote_driver.c:1347 #, fuzzy, c-format msgid "unable to import certificate: %s" msgstr "설정 파일 쓰기 실패: %s" #: src/remote/remote_driver.c:1354 msgid "The certificate has expired" msgstr "" #: src/remote/remote_driver.c:1360 msgid "The certificate is not yet activated" msgstr "" #: src/remote/remote_driver.c:1368 #, c-format msgid "Certificate's owner does not match the hostname (%s)" msgstr "" #: src/remote/remote_driver.c:1760 #, c-format msgid "too many NUMA cells: %d > %d" msgstr "" #: src/remote/remote_driver.c:1823 src/remote/remote_driver.c:1837 #, fuzzy, c-format msgid "too many remote domain IDs: %d > %d" msgstr "과도한 도메인" #: src/remote/remote_driver.c:2389 #, c-format msgid "map length greater than maximum: %d > %d" msgstr "" #: src/remote/remote_driver.c:2428 #, c-format msgid "vCPU count exceeds maximum: %d > %d" msgstr "" #: src/remote/remote_driver.c:2434 #, c-format msgid "vCPU map buffer length exceeds maximum: %d > %d" msgstr "" #: src/remote/remote_driver.c:2451 #, c-format msgid "host reports too many vCPUs: %d > %d" msgstr "" #: src/remote/remote_driver.c:2457 #, c-format msgid "host reports map buffer length exceeds maximum: %d > %d" msgstr "" #: src/remote/remote_driver.c:2532 #, c-format msgid "security label exceeds maximum: %zd" msgstr "" #: src/remote/remote_driver.c:2567 #, c-format msgid "security model exceeds maximum: %zd" msgstr "" #: src/remote/remote_driver.c:2576 #, c-format msgid "security doi exceeds maximum: %zd" msgstr "" #: src/remote/remote_driver.c:2879 src/remote/remote_driver.c:2893 #, fuzzy, c-format msgid "too many remote domain names: %d > %d" msgstr "과도한 도메인" #: src/remote/remote_driver.c:3186 msgid "" "remoteDomainGetSchedulerParameters: returned number of parameters exceeds " "limit" msgstr "" #: src/remote/remote_driver.c:3196 #, c-format msgid "Parameter %s too big for destination" msgstr "" #: src/remote/remote_driver.c:3216 msgid "remoteDomainGetSchedulerParameters: unknown parameter type" msgstr "" #: src/remote/remote_driver.c:3274 #, fuzzy msgid "unknown parameter type" msgstr "알려지지 않은 OS 유형" #: src/remote/remote_driver.c:3384 #, fuzzy, c-format msgid "too many memory stats requested: %d > %d" msgstr "과도한 드라이버가 %s에 등록됨" #: src/remote/remote_driver.c:3428 #, c-format msgid "block peek request too large for remote protocol, %zi > %d" msgstr "" #: src/remote/remote_driver.c:3449 src/remote/remote_driver.c:3500 msgid "returned buffer is not same size as requested" msgstr "" #: src/remote/remote_driver.c:3480 #, c-format msgid "memory peek request too large for remote protocol, %zi > %d" msgstr "" #: src/remote/remote_driver.c:3612 src/remote/remote_driver.c:3626 #: src/remote/remote_driver.c:3694 src/remote/remote_driver.c:3708 #, fuzzy, c-format msgid "too many remote networks: %d > %d" msgstr "과도한 네트워크" #: src/remote/remote_driver.c:4167 src/remote/remote_driver.c:4181 #: src/remote/remote_driver.c:4248 src/remote/remote_driver.c:4262 #, fuzzy, c-format msgid "too many remote interfaces: %d > %d" msgstr "과도한 드라이버가 %s에 등록됨" #: src/remote/remote_driver.c:4607 src/remote/remote_driver.c:4685 #, fuzzy msgid "too many storage pools requested" msgstr "과도한 드라이버가 등록됨" #: src/remote/remote_driver.c:4619 src/remote/remote_driver.c:4697 #, fuzzy msgid "too many storage pools received" msgstr "과도한 드라이버가 등록됨" #: src/remote/remote_driver.c:5249 #, fuzzy msgid "too many storage volumes requested" msgstr "과도한 드라이버가 등록됨" #: src/remote/remote_driver.c:5262 #, fuzzy msgid "too many storage volumes received" msgstr "과도한 드라이버가 등록됨" #: src/remote/remote_driver.c:5657 #, fuzzy msgid "too many device names requested" msgstr "과도한 드라이버가 등록됨" #: src/remote/remote_driver.c:5671 #, fuzzy msgid "too many device names received" msgstr "과도한 드라이버가 등록됨" #: src/remote/remote_driver.c:5820 #, fuzzy msgid "too many capability names requested" msgstr "과도한 드라이버가 등록됨" #: src/remote/remote_driver.c:5833 msgid "too many capability names received" msgstr "" #: src/remote/remote_driver.c:6027 #, fuzzy, c-format msgid "unknown authentication type %s" msgstr "작업 실패: %s" #: src/remote/remote_driver.c:6037 #, c-format msgid "requested authentication type %s rejected" msgstr "" #: src/remote/remote_driver.c:6078 #, fuzzy, c-format msgid "unsupported authentication type %d" msgstr "작업 실패" #: src/remote/remote_driver.c:6320 #, fuzzy, c-format msgid "failed to initialize SASL library: %d (%s)" msgstr "S-Expr 나열하기 실패: %s" #: src/remote/remote_driver.c:6329 #, fuzzy msgid "failed to get sock address" msgstr "호스트명 보기 실패" #: src/remote/remote_driver.c:6339 #, fuzzy msgid "failed to get peer address" msgstr "기능 전환 실패" #: src/remote/remote_driver.c:6364 #, fuzzy, c-format msgid "Failed to create SASL client context: %d (%s)" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/remote/remote_driver.c:6377 msgid "invalid cipher size for TLS session" msgstr "" #: src/remote/remote_driver.c:6387 #, c-format msgid "cannot set external SSF %d (%s)" msgstr "" #: src/remote/remote_driver.c:6406 #, c-format msgid "cannot set security props %d (%s)" msgstr "" #: src/remote/remote_driver.c:6425 #, fuzzy, c-format msgid "SASL mechanism %s not supported by server" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/remote/remote_driver.c:6444 #, fuzzy, c-format msgid "Failed to start SASL negotiation: %d (%s)" msgstr "도메인 %s 시작하기 실패" #: src/remote/remote_driver.c:6462 src/remote/remote_driver.c:6540 #, fuzzy msgid "Failed to make auth credentials" msgstr "내용 저장 실패" #: src/remote/remote_driver.c:6486 #, c-format msgid "SASL negotiation data too long: %d bytes" msgstr "" #: src/remote/remote_driver.c:6526 #, fuzzy, c-format msgid "Failed SASL step: %d (%s)" msgstr "도메인 %s 시작하기 실패" #: src/remote/remote_driver.c:6610 #, c-format msgid "negotiation SSF %d was not strong enough" msgstr "" #: src/remote/remote_driver.c:6686 #, fuzzy msgid "Failed to collect auth credentials" msgstr "하이퍼바이저에 연결하기 실패" #: src/remote/remote_driver.c:6721 msgid "no event support" msgstr "" #: src/remote/remote_driver.c:6726 msgid "adding cb to list" msgstr "" #: src/remote/remote_driver.c:6756 #, fuzzy msgid "marking cb for deletion" msgstr "도메인 vcpu 정보" #: src/remote/remote_driver.c:6762 msgid "removing cb from list" msgstr "" #: src/remote/remote_driver.c:6883 src/remote/remote_driver.c:6896 #, fuzzy, c-format msgid "too many remote secret UUIDs: %d > %d" msgstr "과도한 도메인" #: src/remote/remote_driver.c:7197 src/remote/remote_driver.c:7584 msgid "xdr_remote_message_header failed" msgstr "" #: src/remote/remote_driver.c:7207 #, c-format msgid "data size %zu too large for payload %d" msgstr "" #: src/remote/remote_driver.c:7220 src/remote/remote_driver.c:7607 msgid "xdr_u_int (length word)" msgstr "" #: src/remote/remote_driver.c:7590 msgid "marshalling args" msgstr "" #: src/remote/remote_driver.c:7653 msgid "cannot send data" msgstr "" #: src/remote/remote_driver.c:7684 #, fuzzy, c-format msgid "failed to read from TLS socket %s" msgstr "소켓 %d에 읽기 실패\n" #: src/remote/remote_driver.c:7689 src/remote/remote_driver.c:7707 #, fuzzy msgid "server closed connection" msgstr "유효하지 않은 연결" #: src/remote/remote_driver.c:7703 msgid "cannot recv data" msgstr "" #: src/remote/remote_driver.c:7736 #, fuzzy, c-format msgid "failed to encode SASL data: %s" msgstr "도메인 %s를 중지하기 실패" #: src/remote/remote_driver.c:7839 #, fuzzy, c-format msgid "failed to decode SASL data: %s" msgstr "%s 도메인 강제 종료 실패 " #: src/remote/remote_driver.c:7890 msgid "xdr_u_int (length word, reply)" msgstr "" #: src/remote/remote_driver.c:7897 msgid "packet received from server too small" msgstr "" #: src/remote/remote_driver.c:7906 msgid "packet received from server too large" msgstr "" #: src/remote/remote_driver.c:7952 #, fuzzy msgid "invalid header in reply" msgstr "%s에 있는 잘못된 인수" #: src/remote/remote_driver.c:7963 #, c-format msgid "unknown program (received %x, expected %x)" msgstr "" #: src/remote/remote_driver.c:7971 #, c-format msgid "unknown protocol version (received %x, expected %x)" msgstr "" #: src/remote/remote_driver.c:7997 #, c-format msgid "got unexpected RPC call %d from server" msgstr "" #: src/remote/remote_driver.c:8026 #, c-format msgid "no call waiting for reply with serial %d" msgstr "" #: src/remote/remote_driver.c:8035 #, c-format msgid "unknown procedure (received %x, expected %x)" msgstr "" #: src/remote/remote_driver.c:8048 msgid "unmarshalling ret" msgstr "" #: src/remote/remote_driver.c:8058 src/remote/remote_driver.c:8179 msgid "unmarshalling remote_error" msgstr "" #: src/remote/remote_driver.c:8067 #, c-format msgid "unknown status (received %x)" msgstr "" #: src/remote/remote_driver.c:8307 msgid "poll on socket failed" msgstr "" #: src/remote/remote_driver.c:8368 msgid "received hangup / error event on socket" msgstr "" #: src/remote/remote_driver.c:8462 #, fuzzy msgid "failed to wait on condition" msgstr "설정 파일 쓰기 실패" #: src/remote/remote_driver.c:8620 msgid "remoteDomainProcessEvent: unmarshalling msg" msgstr "" #: src/secret/secret_driver.c:170 #, fuzzy, c-format msgid "mkstemp('%s') failed" msgstr "작업 실패" #: src/secret/secret_driver.c:174 #, c-format msgid "fchmod('%s') failed" msgstr "" #: src/secret/secret_driver.c:180 #, fuzzy, c-format msgid "error writing to '%s'" msgstr "로그 파일 쓰기 실패" #: src/secret/secret_driver.c:185 #, c-format msgid "error closing '%s'" msgstr "" #: src/secret/secret_driver.c:191 #, c-format msgid "rename(%s, %s) failed" msgstr "" #: src/secret/secret_driver.c:242 #, fuzzy, c-format msgid "cannot create '%s'" msgstr "내부 오류 %s" #: src/secret/secret_driver.c:349 #, c-format msgid " does not match secret file name '%s'" msgstr "" #: src/secret/secret_driver.c:376 src/secret/secret_driver.c:485 #, fuzzy, c-format msgid "cannot open '%s'" msgstr "도메인을 찾을 수 없음: %s" #: src/secret/secret_driver.c:380 #, fuzzy, c-format msgid "cannot stat '%s'" msgstr "상태 없음" #: src/secret/secret_driver.c:385 #, c-format msgid "'%s' file does not fit in memory" msgstr "" #: src/secret/secret_driver.c:394 #, fuzzy, c-format msgid "cannot read '%s'" msgstr "내부 오류 %s" #: src/secret/secret_driver.c:402 #, fuzzy, c-format msgid "invalid base64 in '%s'" msgstr "%s에 있는 잘못된 인수" #: src/secret/secret_driver.c:501 #, fuzzy, c-format msgid "Error reading secret: %s" msgstr "드라이버를 다시 불러오는 도중 오류 발생 " #: src/secret/secret_driver.c:634 src/secret/secret_driver.c:802 #: src/secret/secret_driver.c:836 src/secret/secret_driver.c:888 #: src/secret/secret_driver.c:934 #, fuzzy, c-format msgid "no secret with matching uuid '%s'" msgstr "XML에 있는 네트워크 정보" #: src/secret/secret_driver.c:661 #, fuzzy, c-format msgid "no secret with matching usage '%s'" msgstr "XML에 있는 네트워크 정보" #: src/secret/secret_driver.c:701 #, c-format msgid "a secret with UUID %s already defined for use with %s" msgstr "" #: src/secret/secret_driver.c:721 #, fuzzy, c-format msgid "a secret with UUID %s is already defined for use with %s" msgstr "이미 %s 도메인이 존재함" #: src/secret/secret_driver.c:728 msgid "cannot change private flag on existing secret" msgstr "" #: src/secret/secret_driver.c:776 msgid "list of secrets is inconsistent" msgstr "" #: src/secret/secret_driver.c:896 #, c-format msgid "secret '%s' does not have a value" msgstr "" #: src/secret/secret_driver.c:903 msgid "secret is private" msgstr "" #: src/secret/secret_driver.c:1026 #, fuzzy msgid "Out of memory initializing secrets" msgstr "클라이언트 할당 메모리 부족 " #: src/security/security_driver.c:53 #, c-format msgid "invalid security model '%s'" msgstr "" #: src/security/security_driver.c:127 #, c-format msgid "%s: DOI '%s' is longer than the maximum allowed length of %d" msgstr "" #: src/security/security_apparmor.c:75 #, fuzzy, c-format msgid "Failed to read AppArmor profiles list '%s'" msgstr "소켓 %d에 읽기 실패\n" #: src/security/security_apparmor.c:124 #, fuzzy, c-format msgid "Failed to read '%s'" msgstr "소켓 %d에 읽기 실패\n" #: src/security/security_apparmor.c:161 #, fuzzy msgid "unable to create pipe" msgstr "XML 생성하기 실패" #: src/security/security_apparmor.c:196 #, fuzzy msgid "unable to write to pipe" msgstr "소켓 %d에 쓰기 실패\n" #: src/security/security_apparmor.c:208 #, c-format msgid "Unexpected exit status from virt-aa-helper %d pid %lu" msgstr "" #: src/security/security_apparmor.c:266 #, fuzzy msgid "could not find libvirtd" msgstr "네트워크 찾기 실패" #: src/security/security_apparmor.c:299 #, fuzzy, c-format msgid "template '%s' does not exist" msgstr "'%s' 명령이 존재하지 않음" #: src/security/security_apparmor.c:338 src/security/security_selinux.c:175 msgid "security label already defined for VM" msgstr "" #: src/security/security_apparmor.c:389 #, fuzzy, c-format msgid "cannot generate AppArmor profile '%s'" msgstr "%s 설정 파일 읽기 실패" #: src/security/security_apparmor.c:414 #, fuzzy msgid "error copying profile name" msgstr "도메인 파일명 해결 중" #: src/security/security_apparmor.c:420 msgid "error calling profile_status()" msgstr "" #: src/security/security_apparmor.c:456 #, fuzzy, c-format msgid "could not remove profile for '%s'" msgstr "%s 설정 파일 읽기 실패" #: src/security/security_apparmor.c:479 src/security/security_selinux.c:721 #, c-format msgid "" "security label driver mismatch: '%s' model configured for domain, but " "hypervisor driver is '%s'." msgstr "" #: src/security/security_apparmor.c:489 #, fuzzy msgid "error calling aa_change_profile()" msgstr "메모리 할당 오류: %s" #: src/security/security_apparmor.c:521 src/security/security_apparmor.c:565 #, fuzzy, c-format msgid "cannot update AppArmor profile '%s'" msgstr "%s 설정 파일 읽기 실패" #: src/security/security_apparmor.c:554 #, fuzzy, c-format msgid "'%s' does not exist" msgstr "'%s' 명령이 존재하지 않음" #: src/security/security_apparmor.c:588 #, fuzzy, c-format msgid "Invalid security label '%s'" msgstr "%s에 있는 잘못된 인수" #: src/security/security_selinux.c:114 #, c-format msgid "cannot open SELinux virtual domain context file '%s'" msgstr "" #: src/security/security_selinux.c:121 #, fuzzy, c-format msgid "cannot read SELinux virtual domain context file %s" msgstr "%s에서 도메인 생성하기 실패" #: src/security/security_selinux.c:133 #, c-format msgid "cannot open SELinux virtual image context file %s" msgstr "" #: src/security/security_selinux.c:140 #, fuzzy, c-format msgid "cannot read SELinux virtual image context file %s" msgstr "%s 설정 파일 읽기 실패" #: src/security/security_selinux.c:196 src/security/security_selinux.c:202 #, c-format msgid "cannot generate selinux context for %s" msgstr "" #: src/security/security_selinux.c:236 src/security/security_selinux.c:288 #, fuzzy, c-format msgid "unable to get PID %d security context" msgstr "현재 메모리 크기를 확인할 수 없음" #: src/security/security_selinux.c:295 #, c-format msgid "security label exceeds maximum length: %d" msgstr "" #: src/security/security_selinux.c:307 msgid "error calling security_getenforce()" msgstr "" #: src/security/security_selinux.c:341 #, fuzzy, c-format msgid "unable to set security context '%s' on '%s'" msgstr "%s에 연결할 수 없음" #: src/security/security_selinux.c:701 #, c-format msgid "Invalid security label %s" msgstr "" #: src/security/security_selinux.c:731 #, fuzzy, c-format msgid "unable to set security context '%s'" msgstr "%s 네트워크 시작 실패" #: src/security/virt-aa-helper.c:100 #, fuzzy, c-format msgid "%s: error: %s\n" msgstr "%s: 오류:" #: src/security/virt-aa-helper.c:112 #, fuzzy, c-format msgid "%s: warning: %s\n" msgstr "경고" #: src/security/virt-aa-helper.c:118 #, c-format msgid "" "%s:\n" "%s\n" msgstr "" #: src/storage/storage_backend.c:134 #, fuzzy, c-format msgid "could not open input path '%s'" msgstr "%s에 연결할 수 없음" #: src/storage/storage_backend.c:156 #, fuzzy, c-format msgid "failed reading from file '%s'" msgstr "%s 설정 파일 읽기 실패" #: src/storage/storage_backend.c:172 src/storage/storage_backend.c:315 #, c-format msgid "cannot extend file '%s'" msgstr "" #: src/storage/storage_backend.c:178 #, fuzzy, c-format msgid "failed writing to file '%s'" msgstr "로그 파일 쓰기 실패" #: src/storage/storage_backend.c:188 src/storage/storage_backend.c:260 #: src/storage/storage_backend.c:365 src/storage/storage_backend_logical.c:638 #, c-format msgid "cannot close file '%s'" msgstr "" #: src/storage/storage_backend.c:222 src/storage/storage_backend.c:299 #: src/storage/storage_backend_fs.c:528 src/storage/storage_backend_fs.c:544 #: src/storage/storage_backend_fs.c:792 #, c-format msgid "cannot create path '%s'" msgstr "" #: src/storage/storage_backend.c:238 src/util/util.c:1179 src/util/util.c:1226 #: src/util/util.c:1304 src/util/util.c:1414 #, fuzzy, c-format msgid "stat of '%s' failed" msgstr "작업 실패: %s" #: src/storage/storage_backend.c:247 src/util/util.c:1185 src/util/util.c:1232 #, fuzzy, c-format msgid "cannot chown '%s' to (%u, %u)" msgstr "도메인을 찾을 수 없음: %s" #: src/storage/storage_backend.c:254 src/storage/storage_backend.c:559 #: src/util/util.c:1192 src/util/util.c:1239 src/util/util.c:1318 #: src/util/util.c:1427 #, fuzzy, c-format msgid "cannot set mode of '%s' to %04o" msgstr "%s 설정 파일 읽기 실패" #: src/storage/storage_backend.c:289 src/storage/storage_backend_disk.c:560 #: src/storage/storage_backend_logical.c:584 #, fuzzy msgid "storage pool does not support encrypted volumes" msgstr "로그 경로가 파일이 아님" #: src/storage/storage_backend.c:306 #, fuzzy, c-format msgid "cannot open new path '%s'" msgstr "도메인을 찾을 수 없음: %s" #: src/storage/storage_backend.c:345 src/storage/storage_backend.c:356 #, c-format msgid "cannot fill file '%s'" msgstr "" #: src/storage/storage_backend.c:401 msgid "too many conflicts when generating an uuid" msgstr "" #: src/storage/storage_backend.c:431 #, fuzzy msgid "secrets already defined" msgstr "이미 %s 도메인이 존재함" #: src/storage/storage_backend.c:499 #, fuzzy, c-format msgid "Cannot set gid to %u before creating %s" msgstr "읽기 용 %s 열기 실패" #: src/storage/storage_backend.c:506 #, fuzzy, c-format msgid "Cannot set uid to %u before creating %s" msgstr "읽기 용 %s 열기 실패" #: src/storage/storage_backend.c:535 #, fuzzy, c-format msgid "Cannot run %s to create %s" msgstr "내부 오류 %s" #: src/storage/storage_backend.c:541 #, fuzzy, c-format msgid "%s failed to create %s" msgstr "XML 생성하기 실패" #: src/storage/storage_backend.c:552 #, c-format msgid "cannot chown %s to (%u, %u)" msgstr "" #: src/storage/storage_backend.c:625 src/storage/storage_backend.c:631 #, fuzzy, c-format msgid "unknown storage vol type %d" msgstr "알려지지 않은 OS 유형 %s" #: src/storage/storage_backend.c:646 msgid "a different backing store can not be specified." msgstr "" #: src/storage/storage_backend.c:653 #, c-format msgid "unknown storage vol backing store type %d" msgstr "" #: src/storage/storage_backend.c:659 #, c-format msgid "inaccessible backing store volume %s" msgstr "" #: src/storage/storage_backend.c:671 #, c-format msgid "qcow volume encryption unsupported with volume format %s" msgstr "" #: src/storage/storage_backend.c:679 #, fuzzy, c-format msgid "unsupported volume encryption format %d" msgstr "작업 실패" #: src/storage/storage_backend.c:685 msgid "too many secrets for qcow encryption" msgstr "" #: src/storage/storage_backend.c:701 msgid "unable to find kvm-img or qemu-img" msgstr "" #: src/storage/storage_backend.c:754 msgid "cannot copy from volume with qcow-create" msgstr "" #: src/storage/storage_backend.c:760 #, c-format msgid "unsupported storage vol type %d" msgstr "" #: src/storage/storage_backend.c:766 msgid "copy-on-write image not supported with qcow-create" msgstr "" #: src/storage/storage_backend.c:772 msgid "encrypted volumes not supported with qcow-create" msgstr "" #: src/storage/storage_backend.c:802 #, c-format msgid "Unknown file create tool type '%d'." msgstr "" #: src/storage/storage_backend.c:851 msgid "creation of non-raw file images is not supported without qemu-img." msgstr "" #: src/storage/storage_backend.c:889 src/storage/storage_backend_fs.c:67 #: src/storage/storage_backend_mpath.c:52 #: src/storage/storage_backend_scsi.c:147 #, c-format msgid "cannot open volume '%s'" msgstr "" #: src/storage/storage_backend.c:952 #, c-format msgid "cannot stat file '%s'" msgstr "" #: src/storage/storage_backend.c:985 #, c-format msgid "cannot seek to end of file '%s'" msgstr "" #: src/storage/storage_backend.c:1006 #, c-format msgid "cannot get file context of '%s'" msgstr "" #: src/storage/storage_backend.c:1077 src/storage/storage_backend_scsi.c:165 #, c-format msgid "cannot seek to beginning of file '%s'" msgstr "" #: src/storage/storage_backend.c:1084 src/storage/storage_backend_scsi.c:172 #, c-format msgid "cannot read beginning of file '%s'" msgstr "" #: src/storage/storage_backend.c:1150 #, c-format msgid "cannot read dir '%s'" msgstr "" #: src/storage/storage_backend.c:1237 #, fuzzy, c-format msgid "Failed to compile regex %s" msgstr "'%s' 열기 실패: %s" #: src/storage/storage_backend.c:1269 src/storage/storage_backend.c:1405 msgid "cannot read fd" msgstr "" #: src/storage/storage_backend.c:1342 src/storage/storage_backend.c:1459 #, fuzzy, c-format msgid "failed to wait for command '%s'" msgstr "'%s' 도메인 보기 실패" #: src/storage/storage_backend.c:1351 src/storage/storage_backend.c:1472 msgid "command did not exit cleanly" msgstr "" #: src/storage/storage_backend.c:1438 #, c-format msgid "read error on pipe to '%s'" msgstr "" #: src/storage/storage_backend.c:1466 #, c-format msgid "non-zero exit status from command %d" msgstr "" #: src/storage/storage_backend.c:1493 src/storage/storage_backend.c:1505 #, c-format msgid "%s not implemented on Win32" msgstr "" #: src/storage/storage_backend_disk.c:109 msgid "cannot parse device start location" msgstr "" #: src/storage/storage_backend_disk.c:116 msgid "cannot parse device end location" msgstr "" #: src/storage/storage_backend_disk.c:398 msgid "Invalid partition type" msgstr "" #: src/storage/storage_backend_disk.c:406 msgid "extended partition already exists" msgstr "" #: src/storage/storage_backend_disk.c:430 msgid "no extended partition found and no primary partition available" msgstr "" #: src/storage/storage_backend_disk.c:515 msgid "no large enough free extent" msgstr "" #: src/storage/storage_backend_disk.c:630 #, c-format msgid "Couldn't read volume target path '%s'" msgstr "" #: src/storage/storage_backend_disk.c:641 #, c-format msgid "Volume path '%s' did not start with parent pool source device name." msgstr "" #: src/storage/storage_backend_disk.c:650 #, c-format msgid "cannot parse partition number from target '%s'" msgstr "" #: src/storage/storage_backend_fs.c:154 #, fuzzy, c-format msgid "invalid netfs path (no /): %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/storage/storage_backend_fs.c:160 #, fuzzy, c-format msgid "invalid netfs path (ends in /): %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/storage/storage_backend_fs.c:265 #, c-format msgid "cannot read mount list '%s'" msgstr "" #: src/storage/storage_backend_fs.c:357 src/storage/storage_backend_fs.c:433 #: src/storage/storage_backend_iscsi.c:510 #, fuzzy msgid "missing source host" msgstr "장치의 소스 정보 부재" #: src/storage/storage_backend_fs.c:362 #, fuzzy msgid "missing source path" msgstr "장치의 소스 정보 부재" #: src/storage/storage_backend_fs.c:368 src/storage/storage_backend_fs.c:444 #: src/storage/storage_backend_iscsi.c:517 #, fuzzy msgid "missing source device" msgstr "장치의 소스 정보 부재" #: src/storage/storage_backend_fs.c:438 #, fuzzy msgid "missing source dir" msgstr "장치의 소스 정보 부재" #: src/storage/storage_backend_fs.c:518 #, fuzzy, c-format msgid "path '%s' is not absolute" msgstr "'%s' 명령이 존재하지 않음" #: src/storage/storage_backend_fs.c:570 #, c-format msgid "cannot open path '%s'" msgstr "" #: src/storage/storage_backend_fs.c:666 #, c-format msgid "cannot statvfs path '%s'" msgstr "" #: src/storage/storage_backend_fs.c:733 #, fuzzy, c-format msgid "failed to remove pool '%s'" msgstr "'%s' 도메인 보기 실패" #: src/storage/storage_backend_fs.c:784 msgid "cannot copy from volume to a directory volume" msgstr "" #: src/storage/storage_backend_fs.c:812 msgid "" "storage pool does not support building encrypted volumes from other volumes" msgstr "" #: src/storage/storage_backend_fs.c:832 msgid "creation of non-raw images is not supported without qemu-img" msgstr "" #: src/storage/storage_backend_fs.c:879 #, c-format msgid "cannot unlink file '%s'" msgstr "" #: src/storage/storage_backend_iscsi.c:66 #, fuzzy, c-format msgid "host lookup failed %s" msgstr "작업 실패: %s" #: src/storage/storage_backend_iscsi.c:73 #, c-format msgid "no IP address for target %s" msgstr "" #: src/storage/storage_backend_iscsi.c:82 #, c-format msgid "cannot format ip addr for %s" msgstr "" #: src/storage/storage_backend_iscsi.c:150 msgid "cannot find session" msgstr "" #: src/storage/storage_backend_iscsi.c:178 #, fuzzy, c-format msgid "Could not allocate memory for output of '%s'" msgstr "%s 설정 목록에 대한 메모리 할당 실패 " #: src/storage/storage_backend_iscsi.c:187 #, c-format msgid "Failed to run '%s' when looking for existing interface with IQN '%s'" msgstr "" #: src/storage/storage_backend_iscsi.c:196 #, c-format msgid "" "Failed to open stream for file descriptor when reading output from '%s': '%s'" msgstr "" #: src/storage/storage_backend_iscsi.c:208 #, fuzzy, c-format msgid "Unexpected line > %d characters when parsing output of '%s'" msgstr "예상외의 mime 유형" #: src/storage/storage_backend_iscsi.c:263 #, fuzzy msgid "Failed to initialize random generator when creating iscsi interface" msgstr "SASL 인증 %s 초기화 실패 " #: src/storage/storage_backend_iscsi.c:284 #, c-format msgid "Failed to run command '%s' to create new iscsi interface" msgstr "" #: src/storage/storage_backend_iscsi.c:300 #, fuzzy, c-format msgid "Failed to run command '%s' to update iscsi interface with IQN '%s'" msgstr "%s %s 인터페이스 상태 보기 실패" #: src/storage/storage_backend_iscsi.c:353 #, fuzzy, c-format msgid "Failed to run %s to get target list" msgstr "%s 네트워크 시작 실패" #: src/storage/storage_backend_iscsi.c:366 #, fuzzy, c-format msgid "Failed to run command '%s' with action '%s'" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/storage/storage_backend_iscsi.c:422 #, c-format msgid "Failed to get host number for iSCSI session with path '%s'" msgstr "" #: src/storage/storage_backend_iscsi.c:430 #, fuzzy, c-format msgid "Failed to find LUs on host %u" msgstr "네트워크 찾기 실패: %s" #: src/storage/storage_backend_logical.c:154 msgid "malformed volume extent offset value" msgstr "" #: src/storage/storage_backend_logical.c:159 msgid "malformed volume extent length value" msgstr "" #: src/storage/storage_backend_logical.c:164 msgid "malformed volume extent size value" msgstr "" #: src/storage/storage_backend_logical.c:222 msgid "lvs command failed" msgstr "" #: src/storage/storage_backend_logical.c:228 #, c-format msgid "lvs command failed with exitstatus %d" msgstr "" #: src/storage/storage_backend_logical.c:355 #, fuzzy msgid "failed to get source from sourceList" msgstr "노드 정보 보기 실패" #: src/storage/storage_backend_logical.c:410 #, c-format msgid "cannot open device '%s'" msgstr "" #: src/storage/storage_backend_logical.c:416 #, c-format msgid "cannot clear device header of '%s'" msgstr "" #: src/storage/storage_backend_logical.c:423 #, c-format msgid "cannot close device '%s'" msgstr "" #: src/storage/storage_backend_logical.c:548 #, c-format msgid "cannot remove PV device '%s'" msgstr "" #: src/storage/storage_backend_logical.c:615 #, c-format msgid "cannot read path '%s'" msgstr "" #: src/storage/storage_backend_logical.c:624 #, c-format msgid "cannot set file owner '%s'" msgstr "" #: src/storage/storage_backend_logical.c:631 #, c-format msgid "cannot set file mode '%s'" msgstr "" #: src/storage/storage_backend_logical.c:647 #, c-format msgid "cannot find newly created volume '%s'" msgstr "" #: src/storage/storage_backend_mpath.c:65 #, fuzzy, c-format msgid "Failed to update volume target info for '%s'" msgstr "%s에서 도메인 생성하기 실패" #: src/storage/storage_backend_mpath.c:76 #, fuzzy, c-format msgid "Failed to update volume target format for '%s'" msgstr "%s에서 도메인 생성하기 실패" #: src/storage/storage_backend_mpath.c:123 #: src/storage/storage_backend_scsi.c:260 #, fuzzy, c-format msgid "Failed to update volume for '%s'" msgstr "%s에서 도메인 생성하기 실패" #: src/storage/storage_backend_mpath.c:331 #, fuzzy, c-format msgid "in %s" msgstr "바인드: %s " #: src/storage/storage_backend_scsi.c:65 #, c-format msgid "Could not find typefile '%s'" msgstr "" #: src/storage/storage_backend_scsi.c:77 #, c-format msgid "Could not read typefile '%s'" msgstr "" #: src/storage/storage_backend_scsi.c:89 #, c-format msgid "Device type '%s' is not an integer" msgstr "" #: src/storage/storage_backend_scsi.c:96 #, c-format msgid "Device type is %d" msgstr "" #: src/storage/storage_backend_scsi.c:228 #, fuzzy, c-format msgid "Trying to create volume for '%s'" msgstr "%s에서 도메인 생성하기 실패" #: src/storage/storage_backend_scsi.c:247 #, c-format msgid "No stable path found for '%s' in '%s'" msgstr "" #: src/storage/storage_backend_scsi.c:311 #, c-format msgid "Looking for block device in '%s'" msgstr "" #: src/storage/storage_backend_scsi.c:316 #: src/storage/storage_backend_scsi.c:407 #, fuzzy, c-format msgid "Failed to opendir sysfs path '%s'" msgstr "'%s' 열기 실패: %s" #: src/storage/storage_backend_scsi.c:337 #: src/storage/storage_backend_scsi.c:377 #, fuzzy, c-format msgid "Block device is '%s'" msgstr "블럭 장치" #: src/storage/storage_backend_scsi.c:364 #, fuzzy, c-format msgid "Failed to parse block name %s" msgstr "%s %s 블럭 상태 보기 실패" #: src/storage/storage_backend_scsi.c:451 #, c-format msgid "Processing LU %u:%u:%u:%u" msgstr "" #: src/storage/storage_backend_scsi.c:456 #, c-format msgid "Failed to determine if %u:%u:%u:%u is a Direct-Access LUN" msgstr "" #: src/storage/storage_backend_scsi.c:472 #, c-format msgid "%u:%u:%u:%u is a Direct-Access LUN" msgstr "" #: src/storage/storage_backend_scsi.c:482 #, fuzzy, c-format msgid "Failed to create new storage volume for %u:%u:%u:%u" msgstr "%s에서 네트워크 생성하기 실패" #: src/storage/storage_backend_scsi.c:488 #, c-format msgid "Created new storage volume for %u:%u:%u:%u successfully" msgstr "" #: src/storage/storage_backend_scsi.c:510 #, c-format msgid "Discovering LUs on host %u" msgstr "" #: src/storage/storage_backend_scsi.c:523 #: src/storage/storage_backend_scsi.c:566 #, fuzzy, c-format msgid "Failed to opendir path '%s'" msgstr "'%s' 열기 실패: %s" #: src/storage/storage_backend_scsi.c:536 #, c-format msgid "Found LU '%s'" msgstr "" #: src/storage/storage_backend_scsi.c:558 #, c-format msgid "Finding host number from '%s'" msgstr "" #: src/storage/storage_backend_scsi.c:575 #, fuzzy, c-format msgid "Failed to parse target '%s'" msgstr "%s 네트워크 시작 실패" #: src/storage/storage_backend_scsi.c:596 #, c-format msgid "Triggering rescan of host %d" msgstr "" #: src/storage/storage_backend_scsi.c:604 #, c-format msgid "Scan trigger path is '%s'" msgstr "" #: src/storage/storage_backend_scsi.c:610 #, c-format msgid "Could not open '%s' to trigger host scan" msgstr "" #: src/storage/storage_backend_scsi.c:621 #, c-format msgid "Write to '%s' to trigger host scan failed" msgstr "" #: src/storage/storage_backend_scsi.c:630 #, c-format msgid "Rescan of host %d complete" msgstr "" #: src/storage/storage_backend_scsi.c:645 #, fuzzy, c-format msgid "Failed to get host number from '%s'" msgstr "%s에서 네트워크 생성하기 실패" #: src/storage/storage_backend_scsi.c:651 #, fuzzy, c-format msgid "Scanning host%u" msgstr "알려지지 않은 호스트 %s" #: src/storage/storage_driver.c:275 src/storage/storage_driver.c:974 #: src/storage/storage_driver.c:1003 msgid "no pool with matching uuid" msgstr "" #: src/storage/storage_driver.c:300 #, c-format msgid "no pool with matching name '%s'" msgstr "" #: src/storage/storage_driver.c:456 src/test/test_driver.c:3761 #, fuzzy, c-format msgid "pool type '%s' does not support source discovery" msgstr "ps2 버스는 %s 입력 장치를 지원하지 않음 " #: src/storage/storage_driver.c:531 src/test/test_driver.c:3788 msgid "storage pool already exists" msgstr "" #: src/storage/storage_driver.c:616 src/storage/storage_driver.c:670 #: src/storage/storage_driver.c:715 src/storage/storage_driver.c:752 #: src/storage/storage_driver.c:808 src/storage/storage_driver.c:857 #: src/storage/storage_driver.c:913 src/storage/storage_driver.c:949 #: src/storage/storage_driver.c:1065 src/storage/storage_driver.c:1098 #: src/storage/storage_driver.c:1143 src/storage/storage_driver.c:1269 #: src/storage/storage_driver.c:1390 src/storage/storage_driver.c:1543 #: src/storage/storage_driver.c:1622 src/storage/storage_driver.c:1675 #: src/storage/storage_driver.c:1722 msgid "no storage pool with matching uuid" msgstr "" #: src/storage/storage_driver.c:622 msgid "pool is still active" msgstr "" #: src/storage/storage_driver.c:628 src/storage/storage_driver.c:767 #: src/storage/storage_driver.c:823 src/storage/storage_driver.c:872 #, c-format msgid "pool '%s' has asynchronous jobs running." msgstr "" #: src/storage/storage_driver.c:679 #, fuzzy msgid "pool already active" msgstr "이미 도메인이 활성화됨" #: src/storage/storage_driver.c:724 #, fuzzy msgid "storage pool is already active" msgstr "이미 도메인이 활성화됨" #: src/storage/storage_driver.c:761 src/storage/storage_driver.c:866 #: src/storage/storage_driver.c:1071 src/storage/storage_driver.c:1104 #: src/storage/storage_driver.c:1149 src/storage/storage_driver.c:1275 #: src/storage/storage_driver.c:1403 src/storage/storage_driver.c:1409 #: src/storage/storage_driver.c:1549 src/storage/storage_driver.c:1628 #: src/storage/storage_driver.c:1681 src/storage/storage_driver.c:1728 #, fuzzy msgid "storage pool is not active" msgstr "로그 경로가 파일이 아님" #: src/storage/storage_driver.c:817 msgid "storage pool is still active" msgstr "" #: src/storage/storage_driver.c:830 msgid "pool does not support volume delete" msgstr "" #: src/storage/storage_driver.c:1009 src/test/test_driver.c:4119 msgid "pool has no config file" msgstr "" #: src/storage/storage_driver.c:1157 src/storage/storage_driver.c:1419 #: src/storage/storage_driver.c:1560 src/storage/storage_driver.c:1636 #: src/storage/storage_driver.c:1689 src/storage/storage_driver.c:1736 #: src/test/test_driver.c:4241 src/test/test_driver.c:4442 #: src/test/test_driver.c:4518 src/test/test_driver.c:4596 #: src/test/test_driver.c:4641 src/test/test_driver.c:4681 #, c-format msgid "no storage vol with matching name '%s'" msgstr "" #: src/storage/storage_driver.c:1197 msgid "no storage vol with matching key" msgstr "" #: src/storage/storage_driver.c:1244 msgid "no storage vol with matching path" msgstr "" #: src/storage/storage_driver.c:1288 src/test/test_driver.c:4354 #: src/test/test_driver.c:4435 msgid "storage vol already exists" msgstr "" #: src/storage/storage_driver.c:1300 msgid "storage pool does not support volume creation" msgstr "" #: src/storage/storage_driver.c:1396 #, c-format msgid "no storage pool with matching name '%s'" msgstr "" #: src/storage/storage_driver.c:1430 #, c-format msgid "storage volume name '%s' already in use." msgstr "" #: src/storage/storage_driver.c:1446 msgid "storage pool does not support volume creation from an existing volume" msgstr "" #: src/storage/storage_driver.c:1452 src/storage/storage_driver.c:1567 #, c-format msgid "volume '%s' is still being allocated." msgstr "" #: src/storage/storage_driver.c:1574 msgid "storage pool does not support vol deletion" msgstr "" #: src/test/test_driver.c:337 #, c-format msgid "Exceeded max iface limit %d" msgstr "" #: src/test/test_driver.c:673 #, c-format msgid "node vol list for pool '%s'" msgstr "" #: src/test/test_driver.c:684 #, fuzzy msgid "resolving volume filename" msgstr "도메인 파일명 해결 중" #: src/test/test_driver.c:770 #, fuzzy, c-format msgid "loading host definition file '%s'" msgstr "호스트 정의 파일을 읽어오는중" #: src/test/test_driver.c:779 #, c-format msgid "Invalid XML in file '%s'" msgstr "" #: src/test/test_driver.c:788 msgid "Root element is not 'node'" msgstr "" #: src/test/test_driver.c:795 msgid "creating xpath context" msgstr "xpath 문맥 생성하는 중" #: src/test/test_driver.c:803 #, c-format msgid "Path %s too big for destination" msgstr "" #: src/test/test_driver.c:813 msgid "node cpu numa nodes" msgstr "노드 cpu numa 노드" #: src/test/test_driver.c:821 msgid "node cpu sockets" msgstr "노드 cpu 소켓" #: src/test/test_driver.c:829 msgid "node cpu cores" msgstr "노드 cpu 코어" #: src/test/test_driver.c:837 msgid "node cpu threads" msgstr "노드 cpu 스레드" #: src/test/test_driver.c:848 msgid "node active cpu" msgstr "노드 활성화 cpu" #: src/test/test_driver.c:855 msgid "node cpu mhz" msgstr "노드 cpu mhz" #: src/test/test_driver.c:863 src/xen/xm_internal.c:1072 #, c-format msgid "Model %s too big for destination" msgstr "" #: src/test/test_driver.c:874 msgid "node memory" msgstr "노드 메모리" #: src/test/test_driver.c:880 msgid "node domain list" msgstr "노드 도메인 목록" #: src/test/test_driver.c:891 msgid "resolving domain filename" msgstr "도메인 파일명 해결 중" #: src/test/test_driver.c:924 #, fuzzy msgid "node network list" msgstr "노드 도메인 목록" #: src/test/test_driver.c:934 msgid "resolving network filename" msgstr "네트워크 파일명 해결 중" #: src/test/test_driver.c:960 #, fuzzy msgid "node interface list" msgstr "노드 도메인 목록" #: src/test/test_driver.c:970 #, fuzzy msgid "resolving interface filename" msgstr "네트워크 파일명 해결 중" #: src/test/test_driver.c:996 #, fuzzy msgid "node pool list" msgstr "노드 도메인 목록" #: src/test/test_driver.c:1008 #, fuzzy msgid "resolving pool filename" msgstr "도메인 파일명 해결 중" #: src/test/test_driver.c:1047 #, fuzzy msgid "node device list" msgstr "노드 도메인 목록" #: src/test/test_driver.c:1061 #, fuzzy msgid "resolving device filename" msgstr "도메인 파일명 해결 중" #: src/test/test_driver.c:1129 msgid "testOpen: supply a path or use test:///default" msgstr "testOpen: 경로를 지정하거나 test:///default 사용" #: src/test/test_driver.c:1480 #, fuzzy, c-format msgid "domain '%s' not paused" msgstr "이미 %s 도메인이 존재함" #: src/test/test_driver.c:1522 src/test/test_driver.c:1563 #, fuzzy, c-format msgid "domain '%s' not running" msgstr "도메인이 아직 실행 중" #: src/test/test_driver.c:1717 #, c-format msgid "saving domain '%s' failed to allocate space for metadata" msgstr "" #: src/test/test_driver.c:1724 #, fuzzy, c-format msgid "saving domain '%s' to '%s': open failed" msgstr "도메인 상태를 파일에 저장" #: src/test/test_driver.c:1731 src/test/test_driver.c:1737 #: src/test/test_driver.c:1743 src/test/test_driver.c:1750 #, fuzzy, c-format msgid "saving domain '%s' to '%s': write failed" msgstr "도메인 상태를 파일에 저장" #: src/test/test_driver.c:1802 #, fuzzy, c-format msgid "cannot read domain image '%s'" msgstr "%s에서 도메인 생성하기 실패" #: src/test/test_driver.c:1808 #, c-format msgid "incomplete save header in '%s'" msgstr "" #: src/test/test_driver.c:1814 msgid "mismatched header magic" msgstr "" #: src/test/test_driver.c:1819 #, fuzzy, c-format msgid "failed to read metadata length in '%s'" msgstr "'%s' 도메인 보기 실패" #: src/test/test_driver.c:1825 msgid "length of metadata out of range" msgstr "" #: src/test/test_driver.c:1834 #, fuzzy, c-format msgid "incomplete metdata in '%s'" msgstr "예상외의 데이터 '%s'" #: src/test/test_driver.c:1897 #, fuzzy, c-format msgid "domain '%s' coredump: failed to open %s" msgstr "도메인 %s를 %s에 덤프함\n" #: src/test/test_driver.c:1903 #, c-format msgid "domain '%s' coredump: failed to write header to %s" msgstr "" #: src/test/test_driver.c:1909 #, fuzzy, c-format msgid "domain '%s' coredump: write failed: %s" msgstr "도메인 %s를 %s에 덤프함\n" #: src/test/test_driver.c:2055 #, fuzzy msgid "cannot hotplug vcpus for an inactive domain" msgstr "비활성화 도메인을 정의하지 않음" #: src/test/test_driver.c:2105 #, fuzzy msgid "cannot list vcpus for an inactive domain" msgstr "비활성화 도메인을 정의하지 않음" #: src/test/test_driver.c:2197 msgid "requested vcpu is higher than allocated vcpus" msgstr "" #: src/test/test_driver.c:2336 msgid "Range exceeds available cells" msgstr "" #: src/test/test_driver.c:2370 #, fuzzy, c-format msgid "Domain '%s' is already running" msgstr "이미 도메인이 실행 중" #: src/test/test_driver.c:2409 #, fuzzy, c-format msgid "Domain '%s' is still running" msgstr "도메인이 아직 실행 중" #: src/test/test_driver.c:2946 #, fuzzy, c-format msgid "Network '%s' is still running" msgstr "네트워크가 아직 실행 중" #: src/test/test_driver.c:2979 #, fuzzy, c-format msgid "Network '%s' is already running" msgstr "이미 네트워크가 실행 중" #: src/test/test_driver.c:3703 src/test/test_driver.c:3867 #: src/test/test_driver.c:3900 src/test/test_driver.c:3968 #, fuzzy, c-format msgid "storage pool '%s' is already active" msgstr "이미 도메인이 활성화됨" #: src/test/test_driver.c:3929 src/test/test_driver.c:4000 #: src/test/test_driver.c:4152 src/test/test_driver.c:4187 #: src/test/test_driver.c:4233 src/test/test_driver.c:4344 #: src/test/test_driver.c:4425 src/test/test_driver.c:4525 #: src/test/test_driver.c:4603 src/test/test_driver.c:4648 #: src/test/test_driver.c:4688 #, c-format msgid "storage pool '%s' is not active" msgstr "" #: src/test/test_driver.c:4284 #, c-format msgid "no storage vol with matching key '%s'" msgstr "" #: src/test/test_driver.c:4318 #, c-format msgid "no storage vol with matching path '%s'" msgstr "" #: src/test/test_driver.c:4362 src/test/test_driver.c:4451 #, c-format msgid "Not enough free space in pool for volume '%s'" msgstr "" #: src/uml/uml_conf.c:183 msgid "IP address not supported for ethernet inteface" msgstr "" #: src/uml/uml_conf.c:188 msgid "script execution not supported for ethernet inteface" msgstr "" #: src/uml/uml_conf.c:195 msgid "TCP server networking type not supported" msgstr "" #: src/uml/uml_conf.c:200 msgid "TCP client networking type not supported" msgstr "" #: src/uml/uml_conf.c:215 #, fuzzy, c-format msgid "Network '%s' not found" msgstr "네트워크를 찾을 수 없음" #: src/uml/uml_conf.c:245 msgid "internal networking type not supported" msgstr "" #: src/uml/uml_conf.c:311 msgid "only TCP listen is supported for chr device" msgstr "" #: src/uml/uml_conf.c:331 #, c-format msgid "unsupported chr device type %d" msgstr "" #: src/uml/uml_driver.c:125 src/util/util.c:377 src/util/util.c:406 msgid "Failed to set close-on-exec file descriptor flag" msgstr "" #: src/uml/uml_driver.c:418 msgid "cannot initialize inotify" msgstr "" #: src/uml/uml_driver.c:424 #, fuzzy, c-format msgid "Failed to create monitor directory %s: %s" msgstr "%s에서 네트워크 생성하기 실패" #: src/uml/uml_driver.c:457 #, fuzzy msgid "umlStartup: out of memory" msgstr "메모리 부족" #: src/uml/uml_driver.c:604 #, fuzzy, c-format msgid "failed to read pid: %s" msgstr "%s 실행 실패\n" #: src/uml/uml_driver.c:627 #, c-format msgid "Unix path %s too long for destination" msgstr "" #: src/uml/uml_driver.c:658 #, fuzzy msgid "cannot open socket" msgstr "노드 cpu 소켓" #: src/uml/uml_driver.c:667 msgid "cannot bind socket" msgstr "" #: src/uml/uml_driver.c:723 #, c-format msgid "cannot send too long command %s (%d bytes)" msgstr "" #: src/uml/uml_driver.c:729 #, c-format msgid "Command %s too long for destination" msgstr "" #: src/uml/uml_driver.c:736 #, fuzzy, c-format msgid "cannot send command %s" msgstr "알려지지 않은 명령: '%s'" #: src/uml/uml_driver.c:746 #, c-format msgid "cannot read reply %s" msgstr "" #: src/uml/uml_driver.c:829 msgid "no kernel specified" msgstr "" #: src/uml/uml_driver.c:838 #, c-format msgid "Cannot find UML kernel %s" msgstr "" #: src/uml/uml_driver.c:949 #, c-format msgid "Got unexpected pid %d != %d" msgstr "" #: src/uml/uml_driver.c:997 #, c-format msgid "unexpected UML URI path '%s', try uml:///system" msgstr "" #: src/uml/uml_driver.c:1004 #, c-format msgid "unexpected UML URI path '%s', try uml:///session" msgstr "" #: src/uml/uml_driver.c:1013 msgid "uml state driver is not active" msgstr "" #: src/uml/uml_driver.c:1230 #, fuzzy, c-format msgid "cannot parse version %s" msgstr "%s에 연결할 수 없음" #: src/uml/uml_driver.c:1321 #, fuzzy msgid "shutdown operation failed" msgstr "작업 실패" #: src/uml/uml_driver.c:1508 msgid "cannot read cputime for domain" msgstr "" #: src/uml/uml_driver.c:1832 #, c-format msgid "cannot read %s" msgstr "" #: src/util/bridge.c:397 msgid "Not enabling IFF_VNET_HDR; TUNGETFEATURES ioctl() not implemented" msgstr "" #: src/util/bridge.c:403 msgid "" "Not enabling IFF_VNET_HDR; TUNGETFEATURES ioctl() reports no IFF_VNET_HDR" msgstr "" #: src/util/bridge.c:412 msgid "Not enabling IFF_VNET_HDR; TUNGETIFF ioctl() not implemented" msgstr "" #: src/util/bridge.c:417 msgid "Enabling IFF_VNET_HDR" msgstr "IFF_VNET_HDR 활성화 중 " #: src/util/bridge.c:422 msgid "Not enabling IFF_VNET_HDR; disabled at build time" msgstr "" #: src/util/conf.c:354 msgid "unterminated number" msgstr "종료되지 않은 숫자" #: src/util/conf.c:387 src/util/conf.c:407 src/util/conf.c:422 msgid "unterminated string" msgstr "종료되지 않은 문자열" #: src/util/conf.c:453 src/util/conf.c:516 msgid "expecting a value" msgstr "값 예상하기" #: src/util/conf.c:464 #, fuzzy msgid "lists not allowed in VMX format" msgstr "목록이 ]로 종료되지 않음" #: src/util/conf.c:478 msgid "expecting a separator in list" msgstr "목록에 있는 분리자 예상하기" #: src/util/conf.c:501 msgid "list is not closed with ]" msgstr "목록이 ]로 종료되지 않음 " #: src/util/conf.c:508 msgid "numbers not allowed in VMX format" msgstr "" #: src/util/conf.c:551 msgid "expecting a name" msgstr "이름 예상하기" #: src/util/conf.c:615 msgid "expecting a separator" msgstr "분리자 예상하기" #: src/util/conf.c:646 msgid "expecting an assignment" msgstr "할당 예상하기" #: src/util/conf.c:941 msgid "failed to open file" msgstr "파일 열기 실패" #: src/util/conf.c:951 msgid "failed to save content" msgstr "내용 저장 실패" #: src/util/hostusb.c:81 #, fuzzy, c-format msgid "Could not parse usb file %s" msgstr "%s에 연결할 수 없음" #: src/util/hostusb.c:104 #, fuzzy, c-format msgid "Could not open directory %s" msgstr "%s에 연결할 수 없음" #: src/util/hostusb.c:131 #, fuzzy, c-format msgid "Failed to parse dir name '%s'" msgstr "'%s' 열기 실패: %s" #: src/util/hostusb.c:149 #, c-format msgid "Did not find USB device %x:%x" msgstr "" #: src/util/json.c:913 #, fuzzy, c-format msgid "cannot parse json %s: %s" msgstr "%s에 연결할 수 없음" #: src/util/json.c:1038 src/util/json.c:1044 msgid "No JSON parser implementation is available" msgstr "" #: src/util/logging.c:333 msgid "Ignoring invalid log level setting." msgstr "" #: src/util/logging.c:784 msgid "Ignoring invalid log output setting." msgstr "" #: src/util/logging.c:840 msgid "Ignoring invalid log filter setting." msgstr "" #: src/util/logging.c:962 msgid "Ignoring invalid log level setting" msgstr "" #: src/util/pci.c:176 #, fuzzy, c-format msgid "Failed to open config space file '%s': %s" msgstr "'%s' 열기 실패: %s" #: src/util/pci.c:196 #, fuzzy, c-format msgid "Failed to read from '%s' : %s" msgstr "'%s' 열기 실패: %s" #: src/util/pci.c:236 #, fuzzy, c-format msgid "Failed to write to '%s' : %s" msgstr "'%s' 열기 실패: %s" #: src/util/pci.c:523 #, c-format msgid "Active %s devices on bus with %s, not doing bus reset" msgstr "" #: src/util/pci.c:532 src/util/pci.c:1308 #, fuzzy, c-format msgid "Failed to find parent device for %s" msgstr "%s에서 장치 분리 실패" #: src/util/pci.c:545 src/util/pci.c:591 #, fuzzy, c-format msgid "Failed to save PCI config space for %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/util/pci.c:565 src/util/pci.c:611 #, fuzzy, c-format msgid "Failed to restore PCI config space for %s" msgstr "%s에서 도메인을 복구하기 실패" #: src/util/pci.c:624 #, fuzzy, c-format msgid "Failed to open config space file '%s'" msgstr "%s 설정 파일 구문 분석 실패" #: src/util/pci.c:646 #, c-format msgid "Not resetting active device %s" msgstr "" #: src/util/pci.c:673 #, fuzzy, c-format msgid "Unable to reset PCI device %s: %s" msgstr "%s에서 장치 분리 실패" #: src/util/pci.c:675 msgid "no FLR, PM reset or bus reset available" msgstr "" #: src/util/pci.c:729 #, c-format msgid "failed to load pci-stub or pciback drivers: %s" msgstr "" #: src/util/pci.c:758 #, fuzzy, c-format msgid "Failed to add PCI device ID '%s' to %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/util/pci.c:771 #, fuzzy, c-format msgid "Failed to unbind PCI device '%s'" msgstr "도메인 %s를 정의하지 않기 실패" #: src/util/pci.c:784 #, fuzzy, c-format msgid "Failed to add slot for PCI device '%s' to %s" msgstr "%s에서 장치 부착하기 실패" #: src/util/pci.c:792 src/util/pci.c:839 #, fuzzy, c-format msgid "Failed to bind PCI device '%s' to %s" msgstr "%s에서 장치 분리 실패" #: src/util/pci.c:804 #, fuzzy, c-format msgid "Failed to remove PCI ID '%s' from %s" msgstr "'%s' 열기 실패: %s" #: src/util/pci.c:818 src/util/pci.c:879 msgid "cannot find any PCI stub module" msgstr "" #: src/util/pci.c:849 #, fuzzy, c-format msgid "Failed to remove slot for PCI device '%s' to %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/util/pci.c:864 #, c-format msgid "Failed to trigger a re-probe for PCI device '%s'" msgstr "" #: src/util/pci.c:1039 #, fuzzy, c-format msgid "Failed to read product/vendor ID for %s" msgstr "%s에서 네트워크 생성하기 실패" #: src/util/pci.c:1118 #, fuzzy, c-format msgid "Device %s is already in use" msgstr "이미 도메인이 활성화됨" #: src/util/pci.c:1361 #, c-format msgid "Device %s is behind a switch lacking ACS and cannot be assigned" msgstr "" #: src/util/processinfo.c:77 src/util/processinfo.c:93 #: src/util/processinfo.c:138 src/util/processinfo.c:152 #, fuzzy, c-format msgid "cannot set CPU affinity on process %d" msgstr "기능 전환 실패" #: src/util/processinfo.c:172 src/util/processinfo.c:182 #, fuzzy msgid "Process CPU affinity is not supported on this platform" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/util/storage_file.c:289 #, c-format msgid "cannot read header '%s'" msgstr "" #: src/util/storage_file.c:415 #, fuzzy, c-format msgid "cannot open file '%s'" msgstr "도메인을 찾을 수 없음: %s" #: src/util/util.c:349 msgid "cannot block signals" msgstr "" #: src/util/util.c:364 msgid "cannot create pipe" msgstr "" #: src/util/util.c:371 src/util/util.c:400 msgid "Failed to set non-blocking file descriptor flag" msgstr "" #: src/util/util.c:393 #, fuzzy msgid "Failed to create pipe" msgstr "XML 생성하기 실패" #: src/util/util.c:428 src/util/util.c:550 msgid "cannot fork child process" msgstr "" #: src/util/util.c:447 src/util/util.c:491 msgid "cannot unblock signals" msgstr "" #: src/util/util.c:507 #, fuzzy msgid "failed to setup stdin file handle" msgstr "호스트명 보기 실패" #: src/util/util.c:513 #, fuzzy msgid "failed to setup stdout file handle" msgstr "로그 파일 정보 보기 실패" #: src/util/util.c:519 #, fuzzy msgid "failed to setup stderr file handle" msgstr "파일 열기 실패" #: src/util/util.c:537 msgid "cannot become session leader" msgstr "" #: src/util/util.c:543 #, c-format msgid "cannot change to root directory: %s" msgstr "" #: src/util/util.c:560 #, c-format msgid "could not write pidfile %s for %d" msgstr "" #: src/util/util.c:587 #, c-format msgid "cannot execute binary %s" msgstr "" #: src/util/util.c:711 #, c-format msgid "Intermediate daemon process exited with status %d." msgstr "" #: src/util/util.c:756 msgid "Unknown poll response." msgstr "" #: src/util/util.c:787 #, fuzzy msgid "poll error" msgstr "오류" #: src/util/util.c:856 #, c-format msgid "cannot wait for '%s'" msgstr "" #: src/util/util.c:865 #, c-format msgid "'%s' exited with non-zero status %d and signal %d: %s" msgstr "" #: src/util/util.c:999 #, fuzzy, c-format msgid "Failed to open file '%s'" msgstr "파일 열기 실패" #: src/util/util.c:1006 #, fuzzy, c-format msgid "Failed to read file '%s'" msgstr "소켓 %d에 읽기 실패\n" #: src/util/util.c:1173 #, fuzzy, c-format msgid "failed to create file '%s'" msgstr "로그 파일 쓰기 실패" #: src/util/util.c:1198 #, fuzzy, c-format msgid "failed to close new file '%s'" msgstr "파일 열기 실패" #: src/util/util.c:1219 #, fuzzy, c-format msgid "failed to create directory '%s'" msgstr "%s에서 네트워크 생성하기 실패" #: src/util/util.c:1274 #, fuzzy, c-format msgid "cannot fork o create file '%s'" msgstr "%s 설정 파일 읽기 실패" #: src/util/util.c:1285 src/util/util.c:1395 #, fuzzy, c-format msgid "failed to wait for child creating '%s'" msgstr "'%s' 도메인 보기 실패" #: src/util/util.c:1311 src/util/util.c:1421 #, fuzzy, c-format msgid "cannot chown '%s' to group %u" msgstr "도메인을 찾을 수 없음: %s" #: src/util/util.c:1331 src/util/util.c:1439 #, fuzzy, c-format msgid "cannot set gid %u creating '%s'" msgstr "내부 오류 %s" #: src/util/util.c:1338 src/util/util.c:1445 #, fuzzy, c-format msgid "cannot set uid %u creating '%s'" msgstr "내부 오류 %s" #: src/util/util.c:1347 #, fuzzy, c-format msgid "child failed to create file '%s'" msgstr "로그 파일 쓰기 실패" #: src/util/util.c:1354 #, fuzzy, c-format msgid "child failed to close new file '%s'" msgstr "파일 열기 실패" #: src/util/util.c:1384 #, fuzzy, c-format msgid "cannot fork to create directory '%s'" msgstr "%s 설정 파일 읽기 실패" #: src/util/util.c:1453 #, fuzzy, c-format msgid "child failed to create directory '%s'" msgstr "%s에서 네트워크 생성하기 실패" #: src/util/util.c:2181 #, c-format msgid "Disk index %d is negative" msgstr "" #: src/util/util.c:2217 #, fuzzy msgid "failed to determine host name" msgstr "호스트명 보기 실패" #: src/util/util.c:2228 #, fuzzy, c-format msgid "getaddrinfo failed for '%s': %s" msgstr "작업 실패: %s" #: src/util/util.c:2234 #, fuzzy msgid "could not determine canonical host name" msgstr "호스트명 보기 실패" #: src/util/util.c:2353 src/util/util.c:2413 src/util/util.c:2456 #, fuzzy msgid "sysconf failed" msgstr "작업 실패" #: src/util/util.c:2371 #, fuzzy, c-format msgid "Failed to find user record for uid '%d'" msgstr "%s에서 네트워크 정의하기 실패" #: src/util/util.c:2431 #, fuzzy, c-format msgid "Failed to find user record for name '%s'" msgstr "%s에서 네트워크 정의하기 실패" #: src/util/util.c:2474 #, fuzzy, c-format msgid "Failed to find group record for name '%s'" msgstr "%s에서 네트워크 정의하기 실패" #: src/util/uuid.c:104 #, c-format msgid "Falling back to pseudorandom UUID, failed to generate random bytes: %s" msgstr "" #: src/util/virterror.c:223 #, fuzzy msgid "Unknown failure" msgstr "알려지지 않음" #: src/util/virterror.c:560 msgid "warning" msgstr "경고" #: src/util/virterror.c:563 msgid "error" msgstr "오류" #: src/util/virterror.c:689 msgid "No error message provided" msgstr "오류 메세지 없음" #: src/util/virterror.c:742 #, c-format msgid "internal error %s" msgstr "내부 오류 %s" #: src/util/virterror.c:744 msgid "internal error" msgstr "내부 오류" #: src/util/virterror.c:747 msgid "out of memory" msgstr "메모리 부족" #: src/util/virterror.c:751 msgid "this function is not supported by the hypervisor" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/util/virterror.c:753 #, c-format msgid "this function is not supported by the hypervisor: %s" msgstr "이 기능은 하이퍼바이저로 지원되지 않음: %s" #: src/util/virterror.c:757 msgid "no hypervisor driver available" msgstr "" #: src/util/virterror.c:759 #, c-format msgid "no hypervisor driver available for %s" msgstr "" #: src/util/virterror.c:763 msgid "invalid connection pointer in" msgstr "잘못된 연결 포인터" #: src/util/virterror.c:765 #, c-format msgid "invalid connection pointer in %s" msgstr "%s에 있는 잘못된 연결 포인터" #: src/util/virterror.c:769 msgid "invalid domain pointer in" msgstr "잘못된 도메인 포인터" #: src/util/virterror.c:771 #, c-format msgid "invalid domain pointer in %s" msgstr "%s에 있는 잘못된 도메인 포인터" #: src/util/virterror.c:775 msgid "invalid argument in" msgstr "잘못된 인수" #: src/util/virterror.c:777 #, c-format msgid "invalid argument in %s" msgstr "%s에 있는 잘못된 인수" #: src/util/virterror.c:781 #, c-format msgid "operation failed: %s" msgstr "작업 실패: %s" #: src/util/virterror.c:783 msgid "operation failed" msgstr "작업 실패" #: src/util/virterror.c:787 #, c-format msgid "GET operation failed: %s" msgstr "GET 작업 실패: %s" #: src/util/virterror.c:789 msgid "GET operation failed" msgstr "GET 작업 실패" #: src/util/virterror.c:793 #, c-format msgid "POST operation failed: %s" msgstr "POST 작업 실패: %s" #: src/util/virterror.c:795 msgid "POST operation failed" msgstr "POST 작업 실패" #: src/util/virterror.c:798 #, c-format msgid "got unknown HTTP error code %d" msgstr "알려지지 않은 HTTP 오류 코드 %d가 있음" #: src/util/virterror.c:802 #, c-format msgid "unknown host %s" msgstr "알려지지 않은 호스트 %s" #: src/util/virterror.c:804 msgid "unknown host" msgstr "알려지지 않은 호스트" #: src/util/virterror.c:808 #, c-format msgid "failed to serialize S-Expr: %s" msgstr "S-Expr 나열하기 실패: %s" #: src/util/virterror.c:810 msgid "failed to serialize S-Expr" msgstr "S-Expr 나열하기 실패" #: src/util/virterror.c:814 msgid "could not use Xen hypervisor entry" msgstr "Xen 하이퍼바이저 항목을 사용할 수 없음" #: src/util/virterror.c:816 #, c-format msgid "could not use Xen hypervisor entry %s" msgstr "Xen 하이퍼바이저 항목 %s을 사용할 수 없음" #: src/util/virterror.c:820 msgid "could not connect to Xen Store" msgstr "Xen Store에 연결할 수 없음" #: src/util/virterror.c:822 #, c-format msgid "could not connect to Xen Store %s" msgstr "Xen Store %s에 연결할 수 없음" #: src/util/virterror.c:825 #, fuzzy, c-format msgid "failed Xen syscall %s" msgstr "Xen syscall %s %d 실패" #: src/util/virterror.c:829 msgid "unknown OS type" msgstr "알려지지 않은 OS 유형" #: src/util/virterror.c:831 #, c-format msgid "unknown OS type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/util/virterror.c:834 msgid "missing kernel information" msgstr "커널 정보 부재" #: src/util/virterror.c:838 msgid "missing root device information" msgstr "root 장치 정보 부재" #: src/util/virterror.c:840 #, c-format msgid "missing root device information in %s" msgstr "%s에 있는 root 장치 정보 부재" #: src/util/virterror.c:844 msgid "missing source information for device" msgstr "장치의 소스 정보 부재" #: src/util/virterror.c:846 #, c-format msgid "missing source information for device %s" msgstr "%s 장치의 소스 정보 부재" #: src/util/virterror.c:850 msgid "missing target information for device" msgstr "장치의 대상 정보 부재" #: src/util/virterror.c:852 #, c-format msgid "missing target information for device %s" msgstr "%s 장치의 대상 정보 부재" #: src/util/virterror.c:856 msgid "missing domain name information" msgstr "도메인 이름 정보 부재" #: src/util/virterror.c:858 #, c-format msgid "missing domain name information in %s" msgstr "%s에 있는 도메인 이름 정보 부재" #: src/util/virterror.c:862 msgid "missing operating system information" msgstr "운영 시스템 정보 부재" #: src/util/virterror.c:864 #, c-format msgid "missing operating system information for %s" msgstr "%s의 운영 시스템 정보 부재" #: src/util/virterror.c:868 msgid "missing devices information" msgstr "장치 정보 부재" #: src/util/virterror.c:870 #, c-format msgid "missing devices information for %s" msgstr "%s의 장치 정보 부재" #: src/util/virterror.c:874 msgid "too many drivers registered" msgstr "과도한 드라이버가 등록됨" #: src/util/virterror.c:876 #, c-format msgid "too many drivers registered in %s" msgstr "과도한 드라이버가 %s에 등록됨" #: src/util/virterror.c:880 msgid "library call failed, possibly not supported" msgstr "라이브러리가 지원되지 않아 라이브러리 호출 실패" #: src/util/virterror.c:882 #, c-format msgid "library call %s failed, possibly not supported" msgstr "라이브러리가 지원되지 않아 %s 라이브러리 호출 실패" #: src/util/virterror.c:886 msgid "XML description not well formed or invalid" msgstr "XML 설명이 잘 작성되지 않았거나 유효하지 않음" #: src/util/virterror.c:888 #, c-format msgid "XML description for %s is not well formed or invalid" msgstr "%s에 대한 XML 설명이 잘 작성되지 않았거나 유효하지 않음" #: src/util/virterror.c:892 msgid "this domain exists already" msgstr "이미 도메인이 존재함" #: src/util/virterror.c:894 #, c-format msgid "domain %s exists already" msgstr "이미 %s 도메인이 존재함" #: src/util/virterror.c:898 msgid "operation forbidden for read only access" msgstr "읽기 전용 액세스에 대해 작업이 허용되지 않음" #: src/util/virterror.c:900 #, c-format msgid "operation %s forbidden for read only access" msgstr "읽기 전용 액세스에 대해 %s 작업이 허용되지 않음" #: src/util/virterror.c:904 msgid "failed to open configuration file for reading" msgstr "읽기 용 설정 파일 열기 실패" #: src/util/virterror.c:906 #, c-format msgid "failed to open %s for reading" msgstr "읽기 용 %s 열기 실패" #: src/util/virterror.c:910 msgid "failed to read configuration file" msgstr "설정 파일 읽기 실패" #: src/util/virterror.c:912 #, c-format msgid "failed to read configuration file %s" msgstr "%s 설정 파일 읽기 실패" #: src/util/virterror.c:916 msgid "failed to parse configuration file" msgstr "설정 파일 구문 분석 실패" #: src/util/virterror.c:918 #, c-format msgid "failed to parse configuration file %s" msgstr "%s 설정 파일 구문 분석 실패" #: src/util/virterror.c:922 msgid "configuration file syntax error" msgstr "설정 파일 구문 오류" #: src/util/virterror.c:924 #, c-format msgid "configuration file syntax error: %s" msgstr "설정 파일 구문 오류: %s" #: src/util/virterror.c:928 msgid "failed to write configuration file" msgstr "설정 파일 쓰기 실패" #: src/util/virterror.c:930 #, c-format msgid "failed to write configuration file: %s" msgstr "설정 파일 쓰기 실패: %s" #: src/util/virterror.c:934 msgid "parser error" msgstr "구문 분석 오류" #: src/util/virterror.c:940 msgid "invalid network pointer in" msgstr "잘못된 네트워크 포인터" #: src/util/virterror.c:942 #, c-format msgid "invalid network pointer in %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/util/virterror.c:946 msgid "this network exists already" msgstr "이미 네트워크가 있음" #: src/util/virterror.c:948 #, c-format msgid "network %s exists already" msgstr "이미 네트워크 %s이(가) 있음" #: src/util/virterror.c:952 msgid "system call error" msgstr "시스템 호출 오류" #: src/util/virterror.c:958 msgid "RPC error" msgstr "RPC 오류" #: src/util/virterror.c:964 msgid "GNUTLS call error" msgstr "GNUTLS 호출 오류" #: src/util/virterror.c:970 msgid "Failed to find the network" msgstr "네트워크 찾기 실패" #: src/util/virterror.c:972 #, c-format msgid "Failed to find the network: %s" msgstr "네트워크 찾기 실패: %s" #: src/util/virterror.c:976 msgid "Domain not found" msgstr "도메인을 찾을 수 없음" #: src/util/virterror.c:978 #, c-format msgid "Domain not found: %s" msgstr "도메인을 찾을 수 없음: %s" #: src/util/virterror.c:982 msgid "Network not found" msgstr "네트워크를 찾을 수 없음" #: src/util/virterror.c:984 #, c-format msgid "Network not found: %s" msgstr "네트워크를 찾을 수 없음: %s" #: src/util/virterror.c:988 #, fuzzy msgid "invalid MAC address" msgstr "잘못된 MAC 주소" #: src/util/virterror.c:990 #, fuzzy, c-format msgid "invalid MAC address: %s" msgstr "잘못된 MAC 주소: %s" #: src/util/virterror.c:994 #, fuzzy msgid "authentication failed" msgstr "작업 실패" #: src/util/virterror.c:996 #, fuzzy, c-format msgid "authentication failed: %s" msgstr "작업 실패: %s" #: src/util/virterror.c:1000 #, fuzzy msgid "Storage pool not found" msgstr "네트워크를 찾을 수 없음" #: src/util/virterror.c:1002 #, fuzzy, c-format msgid "Storage pool not found: %s" msgstr "네트워크를 찾을 수 없음: %s" #: src/util/virterror.c:1006 #, fuzzy msgid "Storage volume not found" msgstr "네트워크를 찾을 수 없음" #: src/util/virterror.c:1008 #, fuzzy, c-format msgid "Storage volume not found: %s" msgstr "네트워크를 찾을 수 없음: %s" #: src/util/virterror.c:1012 #, fuzzy msgid "invalid storage pool pointer in" msgstr "잘못된 네트워크 포인터" #: src/util/virterror.c:1014 #, fuzzy, c-format msgid "invalid storage pool pointer in %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/util/virterror.c:1018 #, fuzzy msgid "invalid storage volume pointer in" msgstr "잘못된 네트워크 포인터" #: src/util/virterror.c:1020 #, fuzzy, c-format msgid "invalid storage volume pointer in %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/util/virterror.c:1024 #, fuzzy msgid "Failed to find a storage driver" msgstr "네트워크 찾기 실패" #: src/util/virterror.c:1026 #, fuzzy, c-format msgid "Failed to find a storage driver: %s" msgstr "네트워크 찾기 실패: %s" #: src/util/virterror.c:1030 #, fuzzy msgid "Failed to find a node driver" msgstr "네트워크 찾기 실패" #: src/util/virterror.c:1032 #, fuzzy, c-format msgid "Failed to find a node driver: %s" msgstr "네트워크 찾기 실패: %s" #: src/util/virterror.c:1036 #, fuzzy msgid "invalid node device pointer" msgstr "잘못된 도메인 포인터" #: src/util/virterror.c:1038 #, fuzzy, c-format msgid "invalid node device pointer in %s" msgstr "%s에 있는 잘못된 도메인 포인터" #: src/util/virterror.c:1042 #, fuzzy msgid "Node device not found" msgstr "도메인을 찾을 수 없음" #: src/util/virterror.c:1044 #, fuzzy, c-format msgid "Node device not found: %s" msgstr "도메인을 찾을 수 없음: %s" #: src/util/virterror.c:1048 #, fuzzy msgid "Security model not found" msgstr "네트워크를 찾을 수 없음" #: src/util/virterror.c:1050 #, fuzzy, c-format msgid "Security model not found: %s" msgstr "네트워크를 찾을 수 없음: %s" #: src/util/virterror.c:1054 msgid "Requested operation is not valid" msgstr "" #: src/util/virterror.c:1056 #, fuzzy, c-format msgid "Requested operation is not valid: %s" msgstr "작업 실패: %s" #: src/util/virterror.c:1060 #, fuzzy msgid "Failed to find the interface" msgstr "네트워크 찾기 실패" #: src/util/virterror.c:1062 #, fuzzy, c-format msgid "Failed to find the interface: %s" msgstr "네트워크 찾기 실패: %s" #: src/util/virterror.c:1066 #, fuzzy msgid "Interface not found" msgstr "네트워크를 찾을 수 없음" #: src/util/virterror.c:1068 #, fuzzy, c-format msgid "Interface not found: %s" msgstr "네트워크를 찾을 수 없음: %s" #: src/util/virterror.c:1072 #, fuzzy msgid "invalid interface pointer in" msgstr "잘못된 네트워크 포인터" #: src/util/virterror.c:1074 #, fuzzy, c-format msgid "invalid interface pointer in %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/util/virterror.c:1078 msgid "multiple matching interfaces found" msgstr "" #: src/util/virterror.c:1080 #, c-format msgid "multiple matching interfaces found: %s" msgstr "" #: src/util/virterror.c:1084 #, fuzzy msgid "Failed to find a secret storage driver" msgstr "네트워크 찾기 실패" #: src/util/virterror.c:1086 #, fuzzy, c-format msgid "Failed to find a secret storage driver: %s" msgstr "네트워크 찾기 실패: %s" #: src/util/virterror.c:1090 #, fuzzy msgid "Invalid secret" msgstr "유효하지 않은 보안 유형 " #: src/util/virterror.c:1092 #, fuzzy, c-format msgid "Invalid secret: %s" msgstr "%s에 있는 잘못된 인수" #: src/util/virterror.c:1096 #, fuzzy msgid "Secret not found" msgstr "네트워크를 찾을 수 없음" #: src/util/virterror.c:1098 #, fuzzy, c-format msgid "Secret not found: %s" msgstr "네트워크를 찾을 수 없음: %s" #: src/util/virterror.c:1102 #, fuzzy msgid "unsupported configuration" msgstr "작업 실패" #: src/util/virterror.c:1104 #, fuzzy, c-format msgid "unsupported configuration: %s" msgstr "지원되지 않는 입력 버스 %s " #: src/util/virterror.c:1108 #, fuzzy msgid "Timed out during operation" msgstr "노드 정보 보기 실패" #: src/util/virterror.c:1110 #, c-format msgid "Timed out during operation: %s" msgstr "" #: src/util/virterror.c:1114 #, fuzzy msgid "Failed to make domain persistent after migration" msgstr "Xend 도메인 정보 분석 실패" #: src/util/virterror.c:1116 #, fuzzy, c-format msgid "Failed to make domain persistent after migration: %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/util/virterror.c:1194 #, fuzzy msgid "internal error: buffer too small" msgstr "내부 오류 %s" #: src/util/xml.c:60 msgid "Invalid parameter to virXPathString()" msgstr "" #: src/util/xml.c:101 #, c-format msgid "'%s' value longer than %Zd bytes in virXPathStringLimit()" msgstr "" #: src/util/xml.c:131 msgid "Invalid parameter to virXPathNumber()" msgstr "" #: src/util/xml.c:161 msgid "Invalid parameter to virXPathLong()" msgstr "" #: src/util/xml.c:248 src/util/xml.c:346 msgid "Invalid parameter to virXPathULong()" msgstr "" #: src/util/xml.c:404 msgid "Invalid parameter to virXPathBoolean()" msgstr "" #: src/util/xml.c:442 msgid "Invalid parameter to virXPathNode()" msgstr "" #: src/util/xml.c:483 msgid "Invalid parameter to virXPathNodeSet()" msgstr "" #: src/vbox/vbox_driver.c:139 src/vbox/vbox_tmpl.c:788 msgid "no VirtualBox driver path specified (try vbox:///session)" msgstr "" #: src/vbox/vbox_driver.c:146 src/vbox/vbox_tmpl.c:795 #, c-format msgid "unknown driver path '%s' specified (try vbox:///session)" msgstr "" #: src/vbox/vbox_driver.c:153 src/vbox/vbox_tmpl.c:802 #, c-format msgid "unknown driver path '%s' specified (try vbox:///system)" msgstr "" #: src/vbox/vbox_driver.c:159 msgid "unable to initialize VirtualBox driver API" msgstr "" #: src/xen/proxy_internal.c:242 #, fuzzy, c-format msgid "Failed to close socket %d" msgstr "소켓 %d를 닫기 실패\n" #: src/xen/proxy_internal.c:299 #, fuzzy, c-format msgid "Failed to write to socket %d" msgstr "소켓 %d에 쓰기 실패\n" #: src/xen/proxy_internal.c:381 #, fuzzy msgid "failed to write proxy request" msgstr "로그 파일 쓰기 실패" #: src/xen/proxy_internal.c:392 src/xen/proxy_internal.c:415 #, fuzzy msgid "failed to read proxy reply" msgstr "Xen 데몬에서 읽기 실패" #: src/xen/proxy_internal.c:397 src/xen/proxy_internal.c:420 #: src/xen/proxy_internal.c:438 #, c-format msgid "Communication error with proxy: got %d bytes of %d\n" msgstr "proxy와의 통신 오류: %d의 %d바이트를 갖음\n" #: src/xen/proxy_internal.c:404 #, c-format msgid "Communication error with proxy: expected %d bytes got %d\n" msgstr "proxy와의 통신 오류: 예상했던 %d 바이트가 %d를 갖음\n" #: src/xen/proxy_internal.c:428 #, c-format msgid "Communication error with proxy: got %d bytes packet\n" msgstr "proxy와의 통신 오류: %d 바이트 패킷을 갖음\n" #: src/xen/proxy_internal.c:450 msgid "Communication error with proxy: malformed packet\n" msgstr "proxy와의 통신 오류: 잘못된 패킷\n" #: src/xen/proxy_internal.c:454 #, fuzzy, c-format msgid "got asynchronous packet number %d" msgstr "비동기식 패킷 번호 %d를 갖음\n" #: src/xen/proxy_internal.c:1037 #, fuzzy msgid "Cannot get domain details" msgstr "도메인 %s을(를) 구문 분석할 수 없음 " #: src/xen/xend_internal.c:128 #, fuzzy msgid "failed to create a socket" msgstr "노드 할당 실패" #: src/xen/xend_internal.c:151 #, fuzzy msgid "failed to connect to xend" msgstr "Xen Store에 연결 실패" #: src/xen/xend_internal.c:198 msgid "failed to read from Xen Daemon" msgstr "Xen 데몬에서 읽기 실패" #: src/xen/xend_internal.c:201 #, fuzzy msgid "failed to write to Xen Daemon" msgstr "Xen 데몬에서 읽기 실패" #: src/xen/xend_internal.c:389 #, c-format msgid "%d status from xen daemon: %s:%s" msgstr "" #: src/xen/xend_internal.c:440 src/xen/xend_internal.c:443 #: src/xen/xend_internal.c:451 #, c-format msgid "xend_post: error from xen daemon: %s" msgstr "" #: src/xen/xend_internal.c:849 #, fuzzy, c-format msgid "unable to connect to '%s:%s'" msgstr "%s에 연결할 수 없음" #: src/xen/xend_internal.c:967 msgid "failed to urlencode the create S-Expr" msgstr "생성된 S-Expr를 urlencode하기 실패" #: src/xen/xend_internal.c:1008 msgid "domain information incomplete, missing domid" msgstr "도메인 정보가 완료되지 않음, domid 부재" #: src/xen/xend_internal.c:1014 msgid "domain information incorrect domid not numeric" msgstr "도메인 정보가 수치가 아닌 잘못된 domid임" #: src/xen/xend_internal.c:1019 src/xen/xend_internal.c:1071 msgid "domain information incomplete, missing uuid" msgstr "도메인 정보가 완료되지 않음, uuid 부재" #: src/xen/xend_internal.c:1058 src/xen/xend_internal.c:2360 #: src/xen/xend_internal.c:2367 msgid "domain information incomplete, missing name" msgstr "도메인 정보가 완료되지 않음, 이름 부재" #: src/xen/xend_internal.c:1152 #, fuzzy msgid "domain information incomplete, missing HVM loader" msgstr "도메인 정보가 완료되지 않음, 이름 부재" #: src/xen/xend_internal.c:1206 msgid "domain information incomplete, missing kernel & bootloader" msgstr "도메인 정보가 완료되지 않음, 커널 & 부트로더 부재" #: src/xen/xend_internal.c:1270 #, fuzzy msgid "Unknown char device type" msgstr "대상 장치 유형" #: src/xen/xend_internal.c:1304 src/xen/xend_internal.c:1344 #: src/xen/xend_internal.c:1360 src/xen/xend_internal.c:1495 #: src/xen/xend_internal.c:1523 src/xen/xend_internal.c:1539 msgid "malformed char device string" msgstr "" #: src/xen/xend_internal.c:1468 #, fuzzy, c-format msgid "unknown chr device type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/xen/xend_internal.c:1630 msgid "domain information incomplete, vbd has no dev" msgstr "도메인 정보가 완료되지 않음, vbd는 dev가 없음" #: src/xen/xend_internal.c:1641 msgid "domain information incomplete, vbd has no src" msgstr "도메인 정보가 완료되지 않음, vbd는 src가 없음" #: src/xen/xend_internal.c:1650 msgid "cannot parse vbd filename, missing driver name" msgstr "vbd 파일명을 구문 분석할 수 없음, 드라이버명 부재" #: src/xen/xend_internal.c:1659 src/xen/xm_internal.c:909 #, c-format msgid "Driver name %s too big for destination" msgstr "" #: src/xen/xend_internal.c:1670 msgid "cannot parse vbd filename, missing driver type" msgstr "vbd 파일명을 구문 분석할 수 없음, 드라이버 유형 부재" #: src/xen/xend_internal.c:1679 src/xen/xm_internal.c:930 #, c-format msgid "Driver type %s too big for destination" msgstr "" #: src/xen/xend_internal.c:1832 #, c-format msgid "malformed mac address '%s'" msgstr "" #: src/xen/xend_internal.c:1918 #, c-format msgid "Sound model %s too big for destination" msgstr "" #: src/xen/xend_internal.c:2118 #, fuzzy, c-format msgid "unknown graphics type '%s'" msgstr "알려지지 않은 OS 유형 %s" #: src/xen/xend_internal.c:2245 #, fuzzy msgid "missing PCI domain" msgstr "도메인을 중지함" #: src/xen/xend_internal.c:2250 #, fuzzy msgid "missing PCI bus" msgstr "부재 \"" #: src/xen/xend_internal.c:2255 #, fuzzy msgid "missing PCI slot" msgstr "부재 \"" #: src/xen/xend_internal.c:2260 #, fuzzy msgid "missing PCI func" msgstr "부재 \"" #: src/xen/xend_internal.c:2266 #, fuzzy, c-format msgid "cannot parse PCI domain '%s'" msgstr "'%s' 도메인 보기 실패" #: src/xen/xend_internal.c:2271 #, c-format msgid "cannot parse PCI bus '%s'" msgstr "" #: src/xen/xend_internal.c:2276 #, c-format msgid "cannot parse PCI slot '%s'" msgstr "" #: src/xen/xend_internal.c:2281 #, c-format msgid "cannot parse PCI func '%s'" msgstr "" #: src/xen/xend_internal.c:2347 msgid "domain information incomplete, missing id" msgstr "도메인 정보가 완료되지 않음, id 부재" #: src/xen/xend_internal.c:2418 #, fuzzy, c-format msgid "invalid CPU mask %s" msgstr "잘못된 MAC 주소: %s" #: src/xen/xend_internal.c:2429 src/xen/xend_internal.c:2439 #: src/xen/xend_internal.c:2449 #, fuzzy, c-format msgid "unknown lifecycle type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/xen/xend_internal.c:2834 #, fuzzy msgid "topology syntax error" msgstr "설정 파일 구문 오류" #: src/xen/xend_internal.c:2898 msgid "failed to parse Xend domain information" msgstr "Xend 도메인 정보 분석 실패" #: src/xen/xend_internal.c:3024 src/xen/xend_internal.c:3051 #: src/xen/xend_internal.c:3079 src/xen/xend_internal.c:3108 #: src/xen/xend_internal.c:3139 src/xen/xend_internal.c:3217 #: src/xen/xend_internal.c:3254 #, fuzzy, c-format msgid "Domain %s isn't running." msgstr "도메인이 아직 실행 중" #: src/xen/xend_internal.c:3415 msgid "xenDaemonDomainFetch failed to find this domain" msgstr "" #: src/xen/xend_internal.c:4174 src/xen/xend_internal.c:4181 #: src/xen/xend_internal.c:4263 #, fuzzy msgid "unsupported device type" msgstr "대상 장치 유형" #: src/xen/xend_internal.c:4308 msgid "xenDaemonGetAutostart failed to find this domain" msgstr "" #: src/xen/xend_internal.c:4349 msgid "xenDaemonSetAutostart failed to find this domain" msgstr "" #: src/xen/xend_internal.c:4357 #, fuzzy msgid "unexpected value from on_xend_start" msgstr "예상외의 값 노드" #: src/xen/xend_internal.c:4373 #, fuzzy msgid "sexpr2string failed" msgstr "작업 실패" #: src/xen/xend_internal.c:4378 #, fuzzy msgid "Failed to redefine sexpr" msgstr "%s 네트워크를 정의하지 않기 실패" #: src/xen/xend_internal.c:4383 msgid "on_xend_start not present in sexpr" msgstr "" #: src/xen/xend_internal.c:4441 msgid "" "xenDaemonDomainMigrate: Xen does not support renaming domains during " "migration" msgstr "" #: src/xen/xend_internal.c:4451 msgid "" "xenDaemonDomainMigrate: Xen does not support bandwidth limits during " "migration" msgstr "" #: src/xen/xend_internal.c:4479 msgid "xenDaemonDomainMigrate: xend cannot migrate paused domains" msgstr "" #: src/xen/xend_internal.c:4487 msgid "xenDaemonDomainMigrate: unsupported flag" msgstr "" #: src/xen/xend_internal.c:4500 msgid "xenDaemonDomainMigrate: invalid URI" msgstr "" #: src/xen/xend_internal.c:4505 msgid "xenDaemonDomainMigrate: only xenmigr:// migrations are supported by Xen" msgstr "" #: src/xen/xend_internal.c:4512 msgid "xenDaemonDomainMigrate: a hostname must be specified in the URI" msgstr "" #: src/xen/xend_internal.c:4532 msgid "xenDaemonDomainMigrate: invalid port number" msgstr "" #: src/xen/xend_internal.c:4597 #, fuzzy msgid "failed to parse domain description" msgstr "Xend 도메인 정보 분석 실패" #: src/xen/xend_internal.c:4603 #, fuzzy msgid "failed to build sexpr" msgstr "S-Expr 나열하기 실패" #: src/xen/xend_internal.c:4613 #, c-format msgid "Failed to create inactive domain %s\n" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/xen/xend_internal.c:4793 src/xen/xend_internal.c:4869 #: src/xen/xend_internal.c:4966 msgid "unsupported in xendConfigVersion < 4" msgstr "" #: src/xen/xend_internal.c:4805 #, fuzzy msgid "node information incomplete, missing scheduler name" msgstr "도메인 정보가 완료되지 않음, 이름 부재" #: src/xen/xend_internal.c:4823 src/xen/xend_internal.c:4924 #: src/xen/xend_internal.c:5036 #, fuzzy msgid "Unknown scheduler" msgstr "스케줄러" #: src/xen/xend_internal.c:4882 src/xen/xend_internal.c:4979 #, fuzzy msgid "Failed to get a scheduler name" msgstr "호스트명 보기 실패" #: src/xen/xend_internal.c:4895 src/xen/xend_internal.c:5015 #, fuzzy msgid "domain information incomplete, missing cpu_weight" msgstr "도메인 정보가 완료되지 않음, uuid 부재" #: src/xen/xend_internal.c:4900 src/xen/xend_internal.c:5024 #, fuzzy msgid "domain information incomplete, missing cpu_cap" msgstr "도메인 정보가 완료되지 않음, uuid 부재" #: src/xen/xend_internal.c:4906 #, c-format msgid "Weight %s too big for destination" msgstr "" #: src/xen/xend_internal.c:4915 #, c-format msgid "Cap %s too big for destination" msgstr "" #: src/xen/xend_internal.c:5082 msgid "domainBlockPeek is not supported for dom0" msgstr "" #: src/xen/xend_internal.c:5103 #, c-format msgid "%s: invalid path" msgstr "" #: src/xen/xend_internal.c:5111 #, fuzzy, c-format msgid "failed to open for reading: %s" msgstr "읽기 용 %s 열기 실패" #: src/xen/xend_internal.c:5123 #, fuzzy, c-format msgid "failed to lseek or read from file: %s" msgstr "%s 설정 파일 읽기 실패" #: src/xen/xend_internal.c:5205 src/xen/xend_internal.c:5251 #, fuzzy, c-format msgid "unexpected graphics type %d" msgstr "예상외의 mime 유형" #: src/xen/xend_internal.c:5294 #, fuzzy msgid "unexpected chr device type" msgstr "예상외의 mime 유형" #: src/xen/xend_internal.c:5377 #, c-format msgid "Cannot directly attach floppy %s" msgstr "" #: src/xen/xend_internal.c:5389 #, c-format msgid "Cannot directly attach CDROM %s" msgstr "" #: src/xen/xend_internal.c:5444 src/xen/xm_internal.c:1994 #, fuzzy, c-format msgid "unsupported disk type %s" msgstr "예상외의 데이터 '%s'" #: src/xen/xend_internal.c:5494 src/xen/xm_internal.c:2097 #, c-format msgid "unsupported network type %d" msgstr "" #: src/xen/xend_internal.c:5535 src/xen/xm_internal.c:2085 #, fuzzy, c-format msgid "network %s is not active" msgstr "%s 네트워크 시작\n" #: src/xen/xend_internal.c:5605 src/xen/xend_internal.c:5656 msgid "managed PCI devices not supported with XenD" msgstr "" #: src/xen/xend_internal.c:5771 src/xen/xend_internal.c:5778 #: src/xen/xend_internal.c:5785 #, fuzzy, c-format msgid "unexpected lifecycle value %d" msgstr "예상외의 값 노드" #: src/xen/xend_internal.c:5806 #, fuzzy msgid "no HVM domain loader" msgstr "노드 도메인 목록" #: src/xen/xend_internal.c:6072 msgid "hotplug of device type not supported" msgstr "" #: src/xen/xen_driver.c:265 #, c-format msgid "unexpected Xen URI path '%s', try xen:///" msgstr "" #: src/xen/xen_driver.c:283 #, c-format msgid "unexpected Xen URI path '%s', try ///var/lib/xen/xend-socket" msgstr "" #: src/xen/xen_driver.c:300 msgid "cannot initialise mutex" msgstr "" #: src/xen/xen_driver.c:1321 msgid "failed to get XML representation of migrated domain" msgstr "" #: src/xen/xen_driver.c:1328 #, fuzzy msgid "failed to define domain on destination host" msgstr "%s에서 도메인 정의하기 실패" #: src/xen/xen_hypervisor.c:1390 #, c-format msgid "Credit scheduler weight parameter (%d) is out of range (1-65535)" msgstr "크레딧 스케줄러의 weight 매개 변수 (%d) 범위 (1-65535) 초과" #: src/xen/xen_hypervisor.c:1399 #, c-format msgid "Credit scheduler cap parameter (%d) is out of range (0-65535)" msgstr "크레딧 스케줄러의 cap 매개 변수 (%d) 범위 (0-65535) 초과" #: src/xen/xen_hypervisor.c:2371 #, fuzzy msgid "could not read CPU flags" msgstr "%s에 연결할 수 없음" #: src/xen/xen_hypervisor.c:2653 src/xen/xen_hypervisor.c:2664 #, c-format msgid "cannot read file %s" msgstr "" #: src/xen/xen_hypervisor.c:2833 src/xen/xen_hypervisor.c:3488 #, fuzzy msgid "domain shut off or invalid" msgstr "도메인 id 또는 uuid" #: src/xen/xen_hypervisor.c:2841 #, fuzzy msgid "unsupported in dom interface < 4" msgstr "대상 장치 유형" #: src/xen/xen_hypervisor.c:2849 src/xen/xen_hypervisor.c:2855 #: src/xen/xen_hypervisor.c:3503 #, fuzzy msgid "cannot get domain details" msgstr "도메인 %s을(를) 구문 분석할 수 없음 " #: src/xen/xen_hypervisor.c:3520 src/xen/xen_hypervisor.c:3528 #, fuzzy msgid "cannot get VCPUs info" msgstr "시간 읽어오는 중" #: src/xen/xen_inotify.c:131 src/xen/xen_inotify.c:207 #, fuzzy, c-format msgid "parsing uuid %s" msgstr "도메인 uuid" #: src/xen/xen_inotify.c:156 msgid "finding dom on config list" msgstr "" #: src/xen/xen_inotify.c:243 #, fuzzy msgid "Error looking up domain" msgstr "도메인 할당 중" #: src/xen/xen_inotify.c:250 src/xen/xen_inotify.c:343 #: src/xen/xen_inotify.c:350 msgid "Error adding file to config cache" msgstr "" #: src/xen/xen_inotify.c:296 msgid "conn, or private data is NULL" msgstr "" #: src/xen/xen_inotify.c:339 src/xen/xen_inotify.c:362 msgid "looking up dom" msgstr "" #: src/xen/xen_inotify.c:407 #, c-format msgid "cannot open directory: %s" msgstr "" #: src/xen/xen_inotify.c:425 msgid "Error adding file to config list" msgstr "" #: src/xen/xen_inotify.c:435 msgid "initializing inotify" msgstr "" #: src/xen/xen_inotify.c:446 #, c-format msgid "adding watch on %s" msgstr "" #: src/xen/xm_internal.c:158 src/xen/xm_internal.c:186 #: src/xen/xm_internal.c:191 src/xen/xm_internal.c:214 #, c-format msgid "config value %s was malformed" msgstr "" #: src/xen/xm_internal.c:236 src/xen/xm_internal.c:249 #, c-format msgid "config value %s was missing" msgstr "" #: src/xen/xm_internal.c:242 #, c-format msgid "config value %s was not a string" msgstr "" #: src/xen/xm_internal.c:399 #, fuzzy, c-format msgid "cannot stat: %s" msgstr "상태 없음" #: src/xen/xm_internal.c:457 msgid "xenXMConfigCacheRefresh: virHashAddEntry" msgstr "" #: src/xen/xm_internal.c:509 #, c-format msgid "cannot read directory %s" msgstr "" #: src/xen/xm_internal.c:795 #, fuzzy, c-format msgid "unexpected value %s for on_poweroff" msgstr "예상외의 값 노드" #: src/xen/xm_internal.c:803 #, fuzzy, c-format msgid "unexpected value %s for on_reboot" msgstr "예상외의 값 노드" #: src/xen/xm_internal.c:811 #, fuzzy, c-format msgid "unexpected value %s for on_crash" msgstr "예상외의 값 노드" #: src/xen/xm_internal.c:874 #, c-format msgid "Source file %s too big for destination" msgstr "" #: src/xen/xm_internal.c:893 #, fuzzy, c-format msgid "Dest file %s too big for destination" msgstr "노드 정보 보기 실패" #: src/xen/xm_internal.c:1048 #, c-format msgid "MAC address %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1056 #, c-format msgid "Bridge %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1064 #, c-format msgid "Script %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1079 #, fuzzy, c-format msgid "Type %s too big for destination" msgstr "노드 정보 보기 실패" #: src/xen/xm_internal.c:1086 #, c-format msgid "Vifname %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1094 #, c-format msgid "IP %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1203 #, fuzzy, c-format msgid "Domain %s too big for destination" msgstr "도메인 %s가 종료됨\n" #: src/xen/xm_internal.c:1213 #, c-format msgid "Bus %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1223 #, c-format msgid "Slot %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1233 #, fuzzy, c-format msgid "Function %s too big for destination" msgstr "수신지 호스트 연결 URI" #: src/xen/xm_internal.c:1349 #, c-format msgid "VFB %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1711 #, fuzzy msgid "read only connection" msgstr "읽기 전용 연결" #: src/xen/xm_internal.c:1716 #, fuzzy msgid "not inactive domain" msgstr "비활성화 도메인 보기" #: src/xen/xm_internal.c:1724 msgid "virHashLookup" msgstr "" #: src/xen/xm_internal.c:1729 msgid "can't retrieve config file for domain" msgstr "" #: src/xen/xm_internal.c:2365 src/xen/xm_internal.c:2374 #: src/xen/xm_internal.c:2383 #, fuzzy, c-format msgid "unexpected lifecycle action %d" msgstr "예상외의 dict 노드" #: src/xen/xm_internal.c:2684 msgid "can't retrieve config filename for domain to overwrite" msgstr "" #: src/xen/xm_internal.c:2690 msgid "can't retrieve config entry for domain to overwrite" msgstr "" #: src/xen/xm_internal.c:2701 src/xen/xm_internal.c:2708 #, fuzzy msgid "failed to remove old domain from config map" msgstr "%s에서 도메인을 복구하기 실패" #: src/xen/xm_internal.c:2717 msgid "config file name is too long" msgstr "" #: src/xen/xm_internal.c:2735 #, fuzzy msgid "unable to get current time" msgstr "현재 메모리 크기를 확인할 수 없음" #: src/xen/xm_internal.c:2744 src/xen/xm_internal.c:2751 #, fuzzy msgid "unable to store config file handle" msgstr "%s 설정 파일 읽기 실패" #: src/xen/xm_internal.c:2985 src/xen/xm_internal.c:3088 #, fuzzy msgid "unknown device" msgstr "알려지지 않은 OS 유형" #: src/xen/xm_internal.c:3148 #, c-format msgid "cannot check link %s points to config %s" msgstr "" #: src/xen/xm_internal.c:3177 #, fuzzy, c-format msgid "failed to create link %s to %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: src/xen/xm_internal.c:3185 #, fuzzy, c-format msgid "failed to remove link %s" msgstr "도메인 %s를 다시 시작하기 실패" #: src/xen/xs_internal.c:300 msgid "failed to connect to Xen Store" msgstr "Xen Store에 연결 실패" #: src/xen/xs_internal.c:325 msgid "adding watch @releaseDomain" msgstr "" #: src/xen/xs_internal.c:334 msgid "adding watch @introduceDomain" msgstr "" #: src/xen/xs_internal.c:1203 msgid "watch already tracked" msgstr "" #: tools/console.c:76 #, fuzzy, c-format msgid "unable to open tty %s: %s" msgstr "'%s' 열기 실패: %s" #: tools/console.c:87 #, fuzzy, c-format msgid "unable to get tty attributes: %s" msgstr "'%s' 열기 실패: %s" #: tools/console.c:96 #, fuzzy, c-format msgid "unable to set tty attributes: %s" msgstr "도메인 %s 시작하기 실패" #: tools/console.c:131 #, fuzzy, c-format msgid "failure waiting for I/O: %s" msgstr "로그 파일 쓰기 실패" #: tools/console.c:145 #, fuzzy, c-format msgid "failure reading input: %s" msgstr "%s 실행 실패\n" #: tools/console.c:167 #, fuzzy, c-format msgid "failure writing output: %s" msgstr "로그 파일 쓰기 실패" #: tools/virsh.c:358 #, fuzzy msgid "unknown error" msgstr "알려지지 않은 호스트" #: tools/virsh.c:379 msgid "print help" msgstr "도움말 프린트하기" #: tools/virsh.c:380 msgid "Prints global help or command specific help." msgstr "전역적 도움말 또는 명령으로된 특정 도움말을 프린트함." #: tools/virsh.c:386 msgid "name of command" msgstr "명령 이름" #: tools/virsh.c:398 msgid "" "Commands:\n" "\n" msgstr "" "명령:\n" "\n" #: tools/virsh.c:411 msgid "autostart a domain" msgstr "자동으로 도메인 시작" #: tools/virsh.c:413 msgid "Configure a domain to be automatically started at boot." msgstr "부팅시 자동으로 도메인이 시작되도록 설정함." #: tools/virsh.c:418 tools/virsh.c:516 tools/virsh.c:741 tools/virsh.c:777 #: tools/virsh.c:834 tools/virsh.c:901 tools/virsh.c:955 tools/virsh.c:1206 #: tools/virsh.c:1249 tools/virsh.c:1494 tools/virsh.c:1543 tools/virsh.c:1581 #: tools/virsh.c:1619 tools/virsh.c:1657 tools/virsh.c:1695 tools/virsh.c:1846 #: tools/virsh.c:1932 tools/virsh.c:2069 tools/virsh.c:2125 tools/virsh.c:2181 #: tools/virsh.c:2300 tools/virsh.c:2548 tools/virsh.c:6150 tools/virsh.c:6225 #: tools/virsh.c:6286 tools/virsh.c:6344 tools/virsh.c:6402 tools/virsh.c:6518 #: tools/virsh.c:6638 tools/virsh.c:6795 tools/virsh.c:7172 msgid "domain name, id or uuid" msgstr "도메인명, id 또는 uuid" #: tools/virsh.c:419 tools/virsh.c:2640 tools/virsh.c:3617 msgid "disable autostarting" msgstr "자동 시작 비활성" #: tools/virsh.c:440 #, c-format msgid "Failed to mark domain %s as autostarted" msgstr "자동 시작으로 %s 도메인을 표시하기 실패" #: tools/virsh.c:442 #, c-format msgid "Failed to unmark domain %s as autostarted" msgstr "자동 시작으로 %s 도메인을 표시 해제하기 실패" #: tools/virsh.c:448 #, c-format msgid "Domain %s marked as autostarted\n" msgstr "%s 도메인은 자동 시작으로 표시됨\n" #: tools/virsh.c:450 #, c-format msgid "Domain %s unmarked as autostarted\n" msgstr "%s 도메인이 자동 시작으로 표시되지 않음\n" #: tools/virsh.c:460 msgid "(re)connect to hypervisor" msgstr "하이퍼바이저로 (재)연결" #: tools/virsh.c:462 msgid "" "Connect to local hypervisor. This is built-in command after shell start up." msgstr "로컬 하이퍼바이저로 연결. 이는 쉘을 시작한 후에 내장된 명령임" #: tools/virsh.c:467 msgid "hypervisor connection URI" msgstr "하이퍼바이저 연결 URI" #: tools/virsh.c:468 msgid "read-only connection" msgstr "읽기 전용 연결" #: tools/virsh.c:479 msgid "Failed to disconnect from the hypervisor" msgstr "하이퍼바이저에서 연결 끊기 실패" #: tools/virsh.c:498 msgid "Failed to connect to the hypervisor" msgstr "하이퍼바이저에 연결하기 실패" #: tools/virsh.c:509 msgid "connect to the guest console" msgstr "게스트 콘솔로 연결" #: tools/virsh.c:511 msgid "Connect the virtual serial console for the guest" msgstr "게스트를 위한 가상 직렬 콘솔 연결" #: tools/virsh.c:533 #, fuzzy msgid "Failed to get local hostname" msgstr "호스트명 보기 실패" #: tools/virsh.c:538 #, fuzzy msgid "Failed to get connection hostname" msgstr "호스트명 보기 실패" #: tools/virsh.c:543 #, fuzzy msgid "Cannot connect to a remote console device" msgstr "게스트 콘솔로 연결" #: tools/virsh.c:548 #, fuzzy msgid "Unable to get domain status" msgstr "'%s' 도메인 보기 실패" #: tools/virsh.c:553 #, fuzzy msgid "The domain is not running" msgstr "도메인이 아직 실행 중" #: tools/virsh.c:574 #, fuzzy, c-format msgid "Connected to domain %s\n" msgstr "도메인 %s 시작하기 실패" #: tools/virsh.c:575 msgid "Escape character is ^]\n" msgstr "" #: tools/virsh.c:579 msgid "No console available for domain\n" msgstr "도메인에서 사용 가능한 콘솔이 없음\n" #: tools/virsh.c:618 msgid "list domains" msgstr "도메인 목록" #: tools/virsh.c:619 msgid "Returns list of domains." msgstr "도메인 목록 보기" #: tools/virsh.c:624 msgid "list inactive domains" msgstr "비활성화 도메인 보기" #: tools/virsh.c:625 msgid "list inactive & active domains" msgstr "비활성화 & 활성화 도메인 보기" #: tools/virsh.c:647 tools/virsh.c:654 msgid "Failed to list active domains" msgstr "활성화 도메인 보기 실패" #: tools/virsh.c:665 tools/virsh.c:673 msgid "Failed to list inactive domains" msgstr "비활성화 도메인 보기 실패" #: tools/virsh.c:682 msgid "Id" msgstr "Id" #: tools/virsh.c:682 tools/virsh.c:3021 tools/virsh.c:3294 tools/virsh.c:4269 #: tools/virsh.c:5230 msgid "Name" msgstr "이름" #: tools/virsh.c:682 tools/virsh.c:3021 tools/virsh.c:3294 tools/virsh.c:4269 msgid "State" msgstr "상태" #: tools/virsh.c:695 tools/virsh.c:717 tools/virsh.c:8287 tools/virsh.c:8303 msgid "no state" msgstr "상태 없음" #: tools/virsh.c:735 msgid "domain state" msgstr "도메인 상태" #: tools/virsh.c:736 #, fuzzy msgid "Returns state about a domain." msgstr "실행 중인 도메인 상태 보기" #: tools/virsh.c:771 msgid "get device block stats for a domain" msgstr "도메인의 장치 블럭 상태 보기" #: tools/virsh.c:772 msgid "Get device block stats for a running domain." msgstr "실행 중인 도메인의 장치 블럭 상태 보기" #: tools/virsh.c:778 msgid "block device" msgstr "블럭 장치" #: tools/virsh.c:801 #, c-format msgid "Failed to get block stats %s %s" msgstr "%s %s 블럭 상태 보기 실패" #: tools/virsh.c:828 msgid "get network interface stats for a domain" msgstr "도메인의 네트워크 인터페이스 상태 보기" #: tools/virsh.c:829 msgid "Get network interface stats for a running domain." msgstr "실행 중인 도메인의 네트워크 인터페이스 상태 보기" #: tools/virsh.c:835 msgid "interface device" msgstr "인터페이스 장치" #: tools/virsh.c:858 #, c-format msgid "Failed to get interface stats %s %s" msgstr "%s %s 인터페이스 상태 보기 실패" #: tools/virsh.c:895 #, fuzzy msgid "get memory statistics for a domain" msgstr "도메인의 장치 블럭 상태 보기" #: tools/virsh.c:896 #, fuzzy msgid "Get memory statistics for a runnng domain." msgstr "실행 중인 도메인의 장치 블럭 상태 보기" #: tools/virsh.c:921 #, fuzzy, c-format msgid "Failed to get memory statistics for domain %s" msgstr "비활성화 도메인명" #: tools/virsh.c:949 msgid "suspend a domain" msgstr "도메인을 중지함" #: tools/virsh.c:950 msgid "Suspend a running domain." msgstr "실행중인 도메인 중지." #: tools/virsh.c:973 #, c-format msgid "Domain %s suspended\n" msgstr "도메인 %s가 중지됨\n" #: tools/virsh.c:975 #, c-format msgid "Failed to suspend domain %s" msgstr "도메인 %s를 중지하기 실패" #: tools/virsh.c:987 msgid "create a domain from an XML file" msgstr "XML 파일에서 도메인 생성" #: tools/virsh.c:988 msgid "Create a domain." msgstr "도메인 생성" #: tools/virsh.c:993 tools/virsh.c:1050 msgid "file containing an XML domain description" msgstr "XML 도메인 설명이 있는 파일" #: tools/virsh.c:995 tools/virsh.c:1155 msgid "attach to console after creation" msgstr "" #: tools/virsh.c:1026 #, c-format msgid "Domain %s created from %s\n" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh.c:1034 #, c-format msgid "Failed to create domain from %s" msgstr "%s에서 도메인 생성하기 실패" #: tools/virsh.c:1044 msgid "define (but don't start) a domain from an XML file" msgstr "XML 파일에서 도메인을 정의함 (시작하지는 않음)" #: tools/virsh.c:1045 msgid "Define a domain." msgstr "도메인 정의" #: tools/virsh.c:1077 #, c-format msgid "Domain %s defined from %s\n" msgstr "%s에서 정의된 도메인 %s\n" #: tools/virsh.c:1081 #, c-format msgid "Failed to define domain from %s" msgstr "%s에서 도메인 정의하기 실패" #: tools/virsh.c:1091 msgid "undefine an inactive domain" msgstr "비활성화 도메인을 정의하지 않음" #: tools/virsh.c:1092 msgid "Undefine the configuration for an inactive domain." msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: tools/virsh.c:1097 tools/virsh.c:2471 msgid "domain name or uuid" msgstr "도메인명 또는 uuid" #: tools/virsh.c:1120 #, c-format msgid "" "a running domain like %s cannot be undefined;\n" "to undefine, first shutdown then undefine using its name or UUID" msgstr "" #: tools/virsh.c:1132 #, c-format msgid "Domain %s has been undefined\n" msgstr "도메인 %s는 정의되지 않음\n" #: tools/virsh.c:1134 #, c-format msgid "Failed to undefine domain %s" msgstr "도메인 %s를 정의하지 않기 실패" #: tools/virsh.c:1147 msgid "start a (previously defined) inactive domain" msgstr "(기존에 정의된) 비활성화 도메인 시작" #: tools/virsh.c:1148 msgid "Start a domain." msgstr "도메인 시작" #: tools/virsh.c:1153 msgid "name of the inactive domain" msgstr "비활성화 도메인명" #: tools/virsh.c:1176 msgid "Domain is already active" msgstr "이미 도메인이 활성화됨" #: tools/virsh.c:1182 #, c-format msgid "Domain %s started\n" msgstr "도메인 %s가 시작됨\n" #: tools/virsh.c:1189 #, c-format msgid "Failed to start domain %s" msgstr "도메인 %s 시작하기 실패" #: tools/virsh.c:1200 msgid "save a domain state to a file" msgstr "도메인 상태를 파일에 저장" #: tools/virsh.c:1201 msgid "Save a running domain." msgstr "실행중인 도메인 저장" #: tools/virsh.c:1207 msgid "where to save the data" msgstr "데이터를 저장할 장소" #: tools/virsh.c:1229 #, c-format msgid "Domain %s saved to %s\n" msgstr "도메인 %s는 %s에 저장됨\n" #: tools/virsh.c:1231 #, c-format msgid "Failed to save domain %s to %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: tools/virsh.c:1243 msgid "show/set scheduler parameters" msgstr "스케줄러 매개 변수 보기/설정" #: tools/virsh.c:1244 msgid "Show/Set scheduler parameters." msgstr "스케줄러 매개 변수 보기/설정" #: tools/virsh.c:1250 msgid "parameter=value" msgstr "" #: tools/virsh.c:1251 msgid "weight for XEN_CREDIT" msgstr "XEN_CREDIT의 weight" #: tools/virsh.c:1252 msgid "cap for XEN_CREDIT" msgstr "XEN_CREDIT의 cap" #: tools/virsh.c:1270 #, fuzzy msgid "Invalid value of weight" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: tools/virsh.c:1285 #, fuzzy msgid "Invalid value of cap" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: tools/virsh.c:1297 msgid "Invalid syntax for --set, expecting name=value" msgstr "" #: tools/virsh.c:1312 msgid "Invalid value for parameter, expecting an int" msgstr "" #: tools/virsh.c:1319 msgid "Invalid value for parameter, expecting an unsigned int" msgstr "" #: tools/virsh.c:1326 msgid "Invalid value for parameter, expecting an long long" msgstr "" #: tools/virsh.c:1333 msgid "Invalid value for parameter, expecting an unsigned long long" msgstr "" #: tools/virsh.c:1339 msgid "Invalid value for parameter, expecting a double" msgstr "" #: tools/virsh.c:1373 tools/virsh.c:1377 msgid "Scheduler" msgstr "스케줄러" #: tools/virsh.c:1377 msgid "Unknown" msgstr "알려지지 않음" #: tools/virsh.c:1449 msgid "restore a domain from a saved state in a file" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh.c:1450 msgid "Restore a domain." msgstr "도메인 복구." #: tools/virsh.c:1455 msgid "the state to restore" msgstr "복구 상태" #: tools/virsh.c:1474 #, c-format msgid "Domain restored from %s\n" msgstr "%s에서 도메인이 복구됨\n" #: tools/virsh.c:1476 #, c-format msgid "Failed to restore domain from %s" msgstr "%s에서 도메인을 복구하기 실패" #: tools/virsh.c:1486 msgid "dump the core of a domain to a file for analysis" msgstr "도메인을 파일에 코어 덤프하여 분석" #: tools/virsh.c:1487 msgid "Core dump a domain." msgstr "도메인을 코어 덤프함." #: tools/virsh.c:1492 msgid "perform a live core dump if supported" msgstr "" #: tools/virsh.c:1493 msgid "crash the domain after core dump" msgstr "" #: tools/virsh.c:1495 msgid "where to dump the core" msgstr "코어 덤프할 위치" #: tools/virsh.c:1523 #, fuzzy, c-format msgid "Domain %s dumped to %s\n" msgstr "도메인 %s를 %s에 덤프함\n" #: tools/virsh.c:1525 #, c-format msgid "Failed to core dump domain %s to %s" msgstr "도메인 %s를 %s에 코어 덤프하기 실패" #: tools/virsh.c:1537 msgid "resume a domain" msgstr "도메인을 다시 시작" #: tools/virsh.c:1538 msgid "Resume a previously suspended domain." msgstr "이전에 중지된 도메인을 다시 시작함." #: tools/virsh.c:1561 #, c-format msgid "Domain %s resumed\n" msgstr "도메인 %s가 다시 시작됨\n" #: tools/virsh.c:1563 #, c-format msgid "Failed to resume domain %s" msgstr "도메인 %s를 다시 시작하기 실패" #: tools/virsh.c:1575 msgid "gracefully shutdown a domain" msgstr "도메인을 종료" #: tools/virsh.c:1576 msgid "Run shutdown in the target domain." msgstr "대상 도메인에서 종료하기 실행" #: tools/virsh.c:1599 #, c-format msgid "Domain %s is being shutdown\n" msgstr "도메인 %s가 종료됨\n" #: tools/virsh.c:1601 #, c-format msgid "Failed to shutdown domain %s" msgstr "도메인 %s를 종료하기 실패" #: tools/virsh.c:1613 msgid "reboot a domain" msgstr "도메인을 재부팅" #: tools/virsh.c:1614 msgid "Run a reboot command in the target domain." msgstr "대상 도메인에서 재부팅 명령 실행." #: tools/virsh.c:1637 #, c-format msgid "Domain %s is being rebooted\n" msgstr "도메인 %s가 재부팅됨\n" #: tools/virsh.c:1639 #, c-format msgid "Failed to reboot domain %s" msgstr "도메인 %s를 재부팅하기 실패" #: tools/virsh.c:1651 msgid "destroy a domain" msgstr "도메인 강제 종료 " #: tools/virsh.c:1652 msgid "Destroy a given domain." msgstr "주어진 도메인 강제 종료.." #: tools/virsh.c:1675 #, c-format msgid "Domain %s destroyed\n" msgstr "%s 도메인 강제 종료\n" #: tools/virsh.c:1677 #, c-format msgid "Failed to destroy domain %s" msgstr "%s 도메인 강제 종료 실패 " #: tools/virsh.c:1689 msgid "domain information" msgstr "도메인 정보" #: tools/virsh.c:1690 msgid "Returns basic information about the domain." msgstr "도메인에 관한 기본 정보 보기" #: tools/virsh.c:1718 tools/virsh.c:1720 msgid "Id:" msgstr "Id:" #: tools/virsh.c:1721 tools/virsh.c:4504 tools/virsh.c:5120 msgid "Name:" msgstr "이름:" #: tools/virsh.c:1724 tools/virsh.c:4507 msgid "UUID:" msgstr "UUID:" #: tools/virsh.c:1727 msgid "OS Type:" msgstr "OS 유형:" #: tools/virsh.c:1732 tools/virsh.c:1890 tools/virsh.c:4514 tools/virsh.c:4518 #: tools/virsh.c:4522 tools/virsh.c:4526 msgid "State:" msgstr "상태:" #: tools/virsh.c:1735 tools/virsh.c:2252 msgid "CPU(s):" msgstr "CPU:" #: tools/virsh.c:1742 tools/virsh.c:1897 msgid "CPU time:" msgstr "CPU 시간:" #: tools/virsh.c:1746 tools/virsh.c:1749 msgid "Max memory:" msgstr "최대 메모리:" #: tools/virsh.c:1750 msgid "no limit" msgstr "무제한" #: tools/virsh.c:1752 msgid "Used memory:" msgstr "사용된 메모리:" #: tools/virsh.c:1760 #, fuzzy msgid "Autostart:" msgstr "자동 시작" #: tools/virsh.c:1761 msgid "enable" msgstr "" #: tools/virsh.c:1761 msgid "disable" msgstr "" #: tools/virsh.c:1774 msgid "Security model:" msgstr "" #: tools/virsh.c:1775 msgid "Security DOI:" msgstr "" #: tools/virsh.c:1784 msgid "Security label:" msgstr "" #: tools/virsh.c:1797 #, fuzzy msgid "NUMA free memory" msgstr "사용된 메모리:" #: tools/virsh.c:1798 msgid "display available free memory for the NUMA cell." msgstr "" #: tools/virsh.c:1803 #, fuzzy msgid "NUMA cell number" msgstr "NUMA cell:" #: tools/virsh.c:1829 msgid "Total" msgstr "" #: tools/virsh.c:1840 msgid "domain vcpu information" msgstr "도메인 vcpu 정보" #: tools/virsh.c:1841 msgid "Returns basic information about the domain virtual CPUs." msgstr "도메인 가상 CPU에 관한 기본 정보 보기" #: tools/virsh.c:1888 msgid "VCPU:" msgstr "VCPU:" #: tools/virsh.c:1889 msgid "CPU:" msgstr "CPU:" #: tools/virsh.c:1899 msgid "CPU Affinity:" msgstr "CPU 동질관계:" #: tools/virsh.c:1911 msgid "Domain shut off, virtual CPUs not present." msgstr "도메인 종료, 가상 CPU가 없음." #: tools/virsh.c:1926 msgid "control domain vcpu affinity" msgstr "도메인 vcpu 동질 관계 제어" #: tools/virsh.c:1927 msgid "Pin domain VCPUs to host physical CPUs." msgstr "도메인 VCPU를 물리적 호스트 CPU에 고정." #: tools/virsh.c:1933 msgid "vcpu number" msgstr "vcpu 수" #: tools/virsh.c:1934 msgid "host cpu number(s) (comma separated)" msgstr "호스트 cpu 수 (콤마로 분리됨)" #: tools/virsh.c:1961 msgid "vcpupin: Invalid or missing vCPU number." msgstr "" #: tools/virsh.c:1967 msgid "vcpupin: Missing cpulist" msgstr "" #: tools/virsh.c:1978 #, fuzzy msgid "vcpupin: failed to get domain informations." msgstr "노드 정보 보기 실패" #: tools/virsh.c:1984 msgid "vcpupin: Invalid vCPU number." msgstr "" #: tools/virsh.c:1993 msgid "cpulist: Invalid format. Empty string." msgstr "cpulist: 잘못된 포맷. 비어있음." #: tools/virsh.c:2003 #, c-format msgid "" "cpulist: %s: Invalid format. Expecting digit at position %d (near '%c')." msgstr "cpulist: %s: 잘못된 포맷. %d ('%c' 주변)에 숫자로 표기" #: tools/virsh.c:2015 #, c-format msgid "" "cpulist: %s: Invalid format. Expecting digit or comma at position %d (near '%" "c')." msgstr "cpulist: %s: 잘못된 포맷. %d ('%c' 주변)에 숫자 또는 콤마로 표기" #: tools/virsh.c:2024 #, c-format msgid "cpulist: %s: Invalid format. Trailing comma at position %d." msgstr "cpulist: %s: 잘못된 포맷. %d로 마지막을 콤마로 표기" #: tools/virsh.c:2040 #, c-format msgid "Physical CPU %d doesn't exist." msgstr "물리적 CPU %d이(가) 존재하지 않음." #: tools/virsh.c:2063 msgid "change number of virtual CPUs" msgstr "가상 CPU 수 변경" #: tools/virsh.c:2064 #, fuzzy msgid "Change the number of virtual CPUs in the guest domain." msgstr "게스트 도메인에서 활성화 상태인 가상 CPU 수 변경." #: tools/virsh.c:2070 msgid "number of virtual CPUs" msgstr "가상 CPU 수" #: tools/virsh.c:2090 msgid "Invalid number of virtual CPUs." msgstr "잘못된 가상 CPU 수." #: tools/virsh.c:2102 msgid "Too many virtual CPUs." msgstr "과도한 가상 CPU 수" #: tools/virsh.c:2119 msgid "change memory allocation" msgstr "메모리 할당 변경" #: tools/virsh.c:2120 msgid "Change the current memory allocation in the guest domain." msgstr "게스트 도메인에 있는 현재 메모리 할당을 변경." #: tools/virsh.c:2126 msgid "number of kilobytes of memory" msgstr "메모리의 킬로바이트 수" #: tools/virsh.c:2147 tools/virsh.c:2159 tools/virsh.c:2203 #, c-format msgid "Invalid value of %d for memory size" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: tools/virsh.c:2153 msgid "Unable to verify MaxMemorySize" msgstr "최대 메모리 크기를 확인할 수 없음" #: tools/virsh.c:2175 msgid "change maximum memory limit" msgstr "최대 메모리 크기 제한 변경" #: tools/virsh.c:2176 msgid "Change the maximum memory allocation limit in the guest domain." msgstr "게스트 도메인에서 최대 메모리 할당 제한 변경." #: tools/virsh.c:2182 msgid "maximum memory limit in kilobytes" msgstr "킬로바이트에서 최대 메모리 크기 제한" #: tools/virsh.c:2209 msgid "Unable to verify current MemorySize" msgstr "현재 메모리 크기를 확인할 수 없음" #: tools/virsh.c:2216 msgid "Unable to shrink current MemorySize" msgstr "현재 메모리 크기를 줄일 수 없음" #: tools/virsh.c:2222 msgid "Unable to change MaxMemorySize" msgstr "최대 메모리 크기를 변경할 수 없음" #: tools/virsh.c:2234 msgid "node information" msgstr "노드 정보" #: tools/virsh.c:2235 msgid "Returns basic information about the node." msgstr "노드에 관한 기본 정보 보기" #: tools/virsh.c:2248 msgid "failed to get node information" msgstr "노드 정보 보기 실패" #: tools/virsh.c:2251 msgid "CPU model:" msgstr "CPU 모델:" #: tools/virsh.c:2253 msgid "CPU frequency:" msgstr "CPU 주파수:" #: tools/virsh.c:2254 msgid "CPU socket(s):" msgstr "CPU 소켓:" #: tools/virsh.c:2255 msgid "Core(s) per socket:" msgstr "소켓당 코어:" #: tools/virsh.c:2256 msgid "Thread(s) per core:" msgstr "코어당 스레드:" #: tools/virsh.c:2257 msgid "NUMA cell(s):" msgstr "NUMA cell:" #: tools/virsh.c:2258 msgid "Memory size:" msgstr "메모리 용량:" #: tools/virsh.c:2267 msgid "capabilities" msgstr "기능" #: tools/virsh.c:2268 msgid "Returns capabilities of hypervisor/driver." msgstr "하이퍼바이저/드라이버 기능으로 전환" #: tools/virsh.c:2281 msgid "failed to get capabilities" msgstr "기능 전환 실패" #: tools/virsh.c:2294 msgid "domain information in XML" msgstr "XML에 있는 도메인 정보" #: tools/virsh.c:2295 msgid "Output the domain information as an XML dump to stdout." msgstr "XML 덤프로서의 도메인 정보를 표준 출력으로 출력." #: tools/virsh.c:2301 tools/virsh.c:3409 #, fuzzy msgid "show inactive defined XML" msgstr "비활성화 도메인 보기" #: tools/virsh.c:2302 msgid "include security sensitive information in XML dump" msgstr "" #: tools/virsh.c:2343 #, fuzzy msgid "Convert native config to domain XML" msgstr "도메인명이나 id를 도메인 UUID로 변환" #: tools/virsh.c:2344 #, fuzzy msgid "Convert native guest configuration format to domain XML format." msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: tools/virsh.c:2349 msgid "source config data format" msgstr "" #: tools/virsh.c:2350 #, fuzzy msgid "config data file to import from" msgstr "설정 파일 구문 오류" #: tools/virsh.c:2389 msgid "Convert domain XML to native config" msgstr "" #: tools/virsh.c:2390 msgid "Convert domain XML config to a native guest configuration format." msgstr "" #: tools/virsh.c:2395 msgid "target config data type format" msgstr "" #: tools/virsh.c:2396 msgid "xml data file to export from" msgstr "" #: tools/virsh.c:2435 msgid "convert a domain id or UUID to domain name" msgstr "도메인 id 또는 UUID를 도메인명으로 변환" #: tools/virsh.c:2441 msgid "domain id or uuid" msgstr "도메인 id 또는 uuid" #: tools/virsh.c:2465 msgid "convert a domain name or UUID to domain id" msgstr "도메인명 또는 UUID를 도메인 id로 변환" #: tools/virsh.c:2500 msgid "convert a domain name or id to domain UUID" msgstr "도메인명이나 id를 도메인 UUID로 변환" #: tools/virsh.c:2506 msgid "domain id or name" msgstr "도메인 id 또는 도메인명" #: tools/virsh.c:2525 msgid "failed to get domain UUID" msgstr "도메인 UUID 보기 실패 " #: tools/virsh.c:2535 msgid "migrate domain to another host" msgstr "도메인을 다른 호스트로 이전" #: tools/virsh.c:2536 msgid "Migrate domain to another host. Add --live for live migration." msgstr "다른 호스트로 도메인 이전. 실시간 이전일 경우 --live 추가." #: tools/virsh.c:2541 msgid "live migration" msgstr "실시간 이전" #: tools/virsh.c:2542 #, fuzzy msgid "peer-2-peer migration" msgstr "실시간 이전" #: tools/virsh.c:2543 #, fuzzy msgid "direct migration" msgstr "실시간 이전" #: tools/virsh.c:2544 #, fuzzy msgid "tunnelled migration" msgstr "실시간 이전" #: tools/virsh.c:2545 #, fuzzy msgid "persist VM on destination" msgstr "노드 정보 보기 실패" #: tools/virsh.c:2546 #, fuzzy msgid "undefine VM on source" msgstr "비활성화 도메인을 정의하지 않음" #: tools/virsh.c:2547 #, fuzzy msgid "do not restart the domain on the destination host" msgstr "%s에서 도메인 정의하기 실패" #: tools/virsh.c:2549 msgid "connection URI of the destination host" msgstr "수신지 호스트 연결 URI" #: tools/virsh.c:2550 msgid "migration URI, usually can be omitted" msgstr "이전 URI, 주로 생략 가능" #: tools/virsh.c:2551 msgid "rename to new name during migration (if supported)" msgstr "" #: tools/virsh.c:2572 msgid "migrate: Missing desturi" msgstr "이전: 수신지 uri (desturi) 부재" #: tools/virsh.c:2601 msgid "migrate: Unexpected migrateuri for peer2peer/direct migration" msgstr "" #: tools/virsh.c:2632 msgid "autostart a network" msgstr "네트워크 자동 시작" #: tools/virsh.c:2634 msgid "Configure a network to be automatically started at boot." msgstr "부팅 시 자동으로 시작하기 위해 네트워크 설정" #: tools/virsh.c:2639 tools/virsh.c:3159 msgid "network name or uuid" msgstr "네트워크 이름 또는 uuid" #: tools/virsh.c:2661 #, c-format msgid "failed to mark network %s as autostarted" msgstr "자동 시작으로 %s 네트워크를 표시하기 실패" #: tools/virsh.c:2663 #, c-format msgid "failed to unmark network %s as autostarted" msgstr "자동 시작으로 %s 네트워크를 표시 해제하기 실패" #: tools/virsh.c:2669 #, c-format msgid "Network %s marked as autostarted\n" msgstr "자동 시작으로 %s 네트워크가 표시됨\n" #: tools/virsh.c:2671 #, c-format msgid "Network %s unmarked as autostarted\n" msgstr "자동 시작으로 %s 네트워크를 표시하지 않음\n" #: tools/virsh.c:2681 msgid "create a network from an XML file" msgstr "XML 파일에서 네트워크 생성" #: tools/virsh.c:2682 msgid "Create a network." msgstr "네트워크 생성" #: tools/virsh.c:2687 tools/virsh.c:2735 msgid "file containing an XML network description" msgstr "XML 네트워크 설명이 있는 파일" #: tools/virsh.c:2714 #, c-format msgid "Network %s created from %s\n" msgstr "%s 에서 생성된 %s 네트워크\n" #: tools/virsh.c:2718 #, c-format msgid "Failed to create network from %s" msgstr "%s에서 네트워크 생성하기 실패" #: tools/virsh.c:2729 msgid "define (but don't start) a network from an XML file" msgstr "XML 파일에서 네트워크를 정의함 (시작하지는 않음)" #: tools/virsh.c:2730 msgid "Define a network." msgstr "네트워크 정의" #: tools/virsh.c:2762 #, c-format msgid "Network %s defined from %s\n" msgstr "%s에서 정의된 %s 네트워크\n" #: tools/virsh.c:2766 #, c-format msgid "Failed to define network from %s" msgstr "%s에서 네트워크 정의하기 실패" #: tools/virsh.c:2777 msgid "destroy a network" msgstr "네트워크 강제 종료" #: tools/virsh.c:2778 msgid "Destroy a given network." msgstr "주어진 네트워크 강제 종료." #: tools/virsh.c:2783 tools/virsh.c:2822 tools/virsh.c:7275 msgid "network name, id or uuid" msgstr "네트워크 이름, id 또는 uuid" #: tools/virsh.c:2801 #, c-format msgid "Network %s destroyed\n" msgstr "%s 네트워크 강제 종료\n" #: tools/virsh.c:2803 #, c-format msgid "Failed to destroy network %s" msgstr "%s 네트워크 강제 종료 실패" #: tools/virsh.c:2816 msgid "network information in XML" msgstr "XML에 있는 네트워크 정보" #: tools/virsh.c:2817 msgid "Output the network information as an XML dump to stdout." msgstr "XML 덤프로서의 네트워크 정보를 표준 출력으로 출력." #: tools/virsh.c:2856 #, fuzzy msgid "edit XML configuration for a physical host interface" msgstr "비활성화 네트워크 설정을 정의하지 않음" #: tools/virsh.c:2857 #, fuzzy msgid "Edit the XML configuration for a physical host interface." msgstr "비활성화 네트워크 설정을 정의하지 않음" #: tools/virsh.c:2862 tools/virsh.c:3408 tools/virsh.c:3500 tools/virsh.c:3538 #: tools/virsh.c:3576 #, fuzzy msgid "interface name or MAC address" msgstr "MAC 주소가 %s인 인터페이스를 찾을 수 없음" #: tools/virsh.c:2905 #, c-format msgid "Interface %s XML configuration not changed.\n" msgstr "" #: tools/virsh.c:2921 tools/virsh.c:7234 msgid "ERROR: the XML configuration was changed by another user" msgstr "" #: tools/virsh.c:2931 #, fuzzy, c-format msgid "Interface %s XML configuration edited.\n" msgstr "설정 파일 읽기 실패" #: tools/virsh.c:2956 msgid "list networks" msgstr "네트워크 목록" #: tools/virsh.c:2957 msgid "Returns list of networks." msgstr "네트워크 목록 보기" #: tools/virsh.c:2962 msgid "list inactive networks" msgstr "비활성화 네트워크 보기" #: tools/virsh.c:2963 msgid "list inactive & active networks" msgstr "비활성화 & 활성화 네트워크 보기" #: tools/virsh.c:2983 tools/virsh.c:2991 msgid "Failed to list active networks" msgstr "활성화 네트워크 보들기 실패" #: tools/virsh.c:3002 tools/virsh.c:3012 msgid "Failed to list inactive networks" msgstr "비활성화 네트워크 보기 실패" #: tools/virsh.c:3022 tools/virsh.c:4269 msgid "Autostart" msgstr "자동 시작" #: tools/virsh.c:3038 tools/virsh.c:3061 tools/virsh.c:4284 tools/virsh.c:4307 msgid "no autostart" msgstr "자동 시작 안함" #: tools/virsh.c:3044 tools/virsh.c:3310 tools/virsh.c:4290 msgid "active" msgstr "활성화" #: tools/virsh.c:3067 tools/virsh.c:3327 tools/virsh.c:4313 tools/virsh.c:4515 msgid "inactive" msgstr "비활성화" #: tools/virsh.c:3083 msgid "convert a network UUID to network name" msgstr "네트워크 UUID를 네트워크 이름으로 변환" #: tools/virsh.c:3089 msgid "network uuid" msgstr "네트워크 uuid" #: tools/virsh.c:3114 msgid "start a (previously defined) inactive network" msgstr "(기존에 정의된) 비활성화 네트워크 시작" #: tools/virsh.c:3115 msgid "Start a network." msgstr "네트워크 시작" #: tools/virsh.c:3120 msgid "name of the inactive network" msgstr "비활성화 네트워크 이름" #: tools/virsh.c:3137 #, c-format msgid "Network %s started\n" msgstr "%s 네트워크 시작\n" #: tools/virsh.c:3140 #, c-format msgid "Failed to start network %s" msgstr "%s 네트워크 시작 실패" #: tools/virsh.c:3153 msgid "undefine an inactive network" msgstr "비활성화 네트워크를 정의하지 않음" #: tools/virsh.c:3154 msgid "Undefine the configuration for an inactive network." msgstr "비활성화 네트워크 설정을 정의하지 않음" #: tools/virsh.c:3177 #, c-format msgid "Network %s has been undefined\n" msgstr "%s 네트워크가 정의되지 않음\n" #: tools/virsh.c:3179 #, c-format msgid "Failed to undefine network %s" msgstr "%s 네트워크를 정의하지 않기 실패" #: tools/virsh.c:3192 msgid "convert a network name to network UUID" msgstr "네트워크 이름을 네트워크 UUID로 변환" #: tools/virsh.c:3198 msgid "network name" msgstr "네트워크 이름" #: tools/virsh.c:3218 msgid "failed to get network UUID" msgstr "네트워크 UUID 보기 실패" #: tools/virsh.c:3230 msgid "list physical host interfaces" msgstr "" #: tools/virsh.c:3231 #, fuzzy msgid "Returns list of physical host interfaces." msgstr "도메인 목록 보기" #: tools/virsh.c:3236 #, fuzzy msgid "list inactive interfaces" msgstr "비활성화 네트워크 보기" #: tools/virsh.c:3237 #, fuzzy msgid "list inactive & active interfaces" msgstr "비활성화 & 활성화 네트워크 보기" #: tools/virsh.c:3256 tools/virsh.c:3264 #, fuzzy msgid "Failed to list active interfaces" msgstr "활성화 네트워크 보들기 실패" #: tools/virsh.c:3275 tools/virsh.c:3285 #, fuzzy msgid "Failed to list inactive interfaces" msgstr "비활성화 네트워크 보기 실패" #: tools/virsh.c:3295 #, fuzzy msgid "MAC Address" msgstr "MAC 주소" #: tools/virsh.c:3342 #, fuzzy msgid "convert an interface MAC address to interface name" msgstr "MAC 주소가 %s인 인터페이스를 찾을 수 없음" #: tools/virsh.c:3348 #, fuzzy msgid "interface mac" msgstr "인터페이스 장치" #: tools/virsh.c:3372 #, fuzzy msgid "convert an interface name to interface MAC address" msgstr "MAC 주소가 %s인 인터페이스를 찾을 수 없음" #: tools/virsh.c:3378 #, fuzzy msgid "interface name" msgstr "인터페이스 장치" #: tools/virsh.c:3402 #, fuzzy msgid "interface information in XML" msgstr "XML에 있는 네트워크 정보" #: tools/virsh.c:3403 #, fuzzy msgid "" "Output the physical host interface information as an XML dump to stdout." msgstr "XML 덤프로서의 도메인 정보를 표준 출력으로 출력." #: tools/virsh.c:3447 #, fuzzy msgid "define (but don't start) a physical host interface from an XML file" msgstr "XML 파일에서 도메인을 정의함 (시작하지는 않음)" #: tools/virsh.c:3448 msgid "Define a physical host interface." msgstr "" #: tools/virsh.c:3453 #, fuzzy msgid "file containing an XML interface description" msgstr "XML 네트워크 설명이 있는 파일" #: tools/virsh.c:3480 #, fuzzy, c-format msgid "Interface %s defined from %s\n" msgstr "%s에서 정의된 %s 네트워크\n" #: tools/virsh.c:3484 #, fuzzy, c-format msgid "Failed to define interface from %s" msgstr "%s에서 네트워크 정의하기 실패" #: tools/virsh.c:3494 msgid "undefine a physical host interface (remove it from configuration)" msgstr "" #: tools/virsh.c:3495 #, fuzzy msgid "undefine an interface." msgstr "비활성화 도메인을 정의하지 않음" #: tools/virsh.c:3518 #, fuzzy, c-format msgid "Interface %s undefined\n" msgstr "인터페이스 장치" #: tools/virsh.c:3520 #, fuzzy, c-format msgid "Failed to undefine interface %s" msgstr "%s 네트워크를 정의하지 않기 실패" #: tools/virsh.c:3532 msgid "start a physical host interface (enable it / \"if-up\")" msgstr "" #: tools/virsh.c:3533 msgid "start a physical host interface." msgstr "" #: tools/virsh.c:3556 #, fuzzy, c-format msgid "Interface %s started\n" msgstr "%s 네트워크 시작\n" #: tools/virsh.c:3558 #, fuzzy, c-format msgid "Failed to start interface %s" msgstr "%s 네트워크 시작 실패" #: tools/virsh.c:3570 msgid "destroy a physical host interface (disable it / \"if-down\")" msgstr "" #: tools/virsh.c:3571 msgid "destroy a physical host interface." msgstr "" #: tools/virsh.c:3594 #, fuzzy, c-format msgid "Interface %s destroyed\n" msgstr "%s 네트워크 강제 종료\n" #: tools/virsh.c:3596 #, fuzzy, c-format msgid "Failed to destroy interface %s" msgstr "%s 네트워크 강제 종료 실패" #: tools/virsh.c:3609 #, fuzzy msgid "autostart a pool" msgstr "자동으로 도메인 시작" #: tools/virsh.c:3611 #, fuzzy msgid "Configure a pool to be automatically started at boot." msgstr "부팅시 자동으로 도메인이 시작되도록 설정함." #: tools/virsh.c:3616 tools/virsh.c:4016 tools/virsh.c:4055 tools/virsh.c:4094 #: tools/virsh.c:4133 tools/virsh.c:4172 tools/virsh.c:4486 tools/virsh.c:4751 #: tools/virsh.c:4984 tools/virsh.c:5061 tools/virsh.c:5102 tools/virsh.c:5153 #: tools/virsh.c:5194 tools/virsh.c:5338 tools/virsh.c:7292 #, fuzzy msgid "pool name or uuid" msgstr "도메인명 또는 uuid" #: tools/virsh.c:3638 #, fuzzy, c-format msgid "failed to mark pool %s as autostarted" msgstr "자동 시작으로 %s 네트워크를 표시하기 실패" #: tools/virsh.c:3640 #, fuzzy, c-format msgid "failed to unmark pool %s as autostarted" msgstr "자동 시작으로 %s 네트워크를 표시 해제하기 실패" #: tools/virsh.c:3646 #, fuzzy, c-format msgid "Pool %s marked as autostarted\n" msgstr "%s 도메인은 자동 시작으로 표시됨\n" #: tools/virsh.c:3648 #, fuzzy, c-format msgid "Pool %s unmarked as autostarted\n" msgstr "%s 도메인이 자동 시작으로 표시되지 않음\n" #: tools/virsh.c:3658 #, fuzzy msgid "create a pool from an XML file" msgstr "XML 파일에서 도메인 생성" #: tools/virsh.c:3659 tools/virsh.c:3881 #, fuzzy msgid "Create a pool." msgstr "도메인 생성" #: tools/virsh.c:3665 tools/virsh.c:3927 #, fuzzy msgid "file containing an XML pool description" msgstr "XML 도메인 설명이 있는 파일" #: tools/virsh.c:3692 #, fuzzy, c-format msgid "Pool %s created from %s\n" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh.c:3696 #, fuzzy, c-format msgid "Failed to create pool from %s" msgstr "%s에서 도메인 생성하기 실패" #: tools/virsh.c:3707 #, fuzzy msgid "create a device defined by an XML file on the node" msgstr "XML 파일에서 도메인 생성" #: tools/virsh.c:3709 msgid "" "Create a device on the node. Note that this command creates devices on the " "physical host that can then be assigned to a virtual machine." msgstr "" #: tools/virsh.c:3717 #, fuzzy msgid "file containing an XML description of the device" msgstr "XML 도메인 설명이 있는 파일" #: tools/virsh.c:3746 #, fuzzy, c-format msgid "Node device %s created from %s\n" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh.c:3750 #, fuzzy, c-format msgid "Failed to create node device from %s" msgstr "%s에서 도메인 생성하기 실패" #: tools/virsh.c:3762 msgid "destroy a device on the node" msgstr "" #: tools/virsh.c:3763 msgid "" "Destroy a device on the node. Note that this command destroys devices on " "the physical host " msgstr "" #: tools/virsh.c:3770 #, fuzzy msgid "name of the device to be destroyed" msgstr "비활성화 네트워크 이름" #: tools/virsh.c:3794 #, c-format msgid "Destroyed node device '%s'\n" msgstr "" #: tools/virsh.c:3796 #, fuzzy, c-format msgid "Failed to destroy node device '%s'" msgstr "%s 도메인 강제 종료 실패 " #: tools/virsh.c:3809 #, fuzzy msgid "name of the pool" msgstr "비활성화 도메인명" #: tools/virsh.c:3810 msgid "print XML document, but don't define/create" msgstr "" #: tools/virsh.c:3811 msgid "type of the pool" msgstr "" #: tools/virsh.c:3812 msgid "source-host for underlying storage" msgstr "" #: tools/virsh.c:3813 msgid "source path for underlying storage" msgstr "" #: tools/virsh.c:3814 msgid "source device for underlying storage" msgstr "" #: tools/virsh.c:3815 msgid "source name for underlying storage" msgstr "" #: tools/virsh.c:3816 msgid "target for underlying storage" msgstr "" #: tools/virsh.c:3863 tools/virsh.c:4717 tools/virsh.c:5022 #, fuzzy msgid "Failed to allocate XML buffer" msgstr "버퍼 할당 실패" #: tools/virsh.c:3880 #, fuzzy msgid "create a pool from a set of args" msgstr "XML 파일에서 도메인 생성" #: tools/virsh.c:3906 #, fuzzy, c-format msgid "Pool %s created\n" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh.c:3909 #, fuzzy, c-format msgid "Failed to create pool %s" msgstr "%s에서 도메인 생성하기 실패" #: tools/virsh.c:3921 #, fuzzy msgid "define (but don't start) a pool from an XML file" msgstr "XML 파일에서 도메인을 정의함 (시작하지는 않음)" #: tools/virsh.c:3922 tools/virsh.c:3970 #, fuzzy msgid "Define a pool." msgstr "도메인 정의" #: tools/virsh.c:3954 #, fuzzy, c-format msgid "Pool %s defined from %s\n" msgstr "%s에서 정의된 도메인 %s\n" #: tools/virsh.c:3958 #, fuzzy, c-format msgid "Failed to define pool from %s" msgstr "%s에서 도메인 정의하기 실패" #: tools/virsh.c:3969 msgid "define a pool from a set of args" msgstr "" #: tools/virsh.c:3995 #, fuzzy, c-format msgid "Pool %s defined\n" msgstr "%s에서 정의된 도메인 %s\n" #: tools/virsh.c:3998 #, fuzzy, c-format msgid "Failed to define pool %s" msgstr "도메인 %s를 정의하지 않기 실패" #: tools/virsh.c:4010 msgid "build a pool" msgstr "" #: tools/virsh.c:4011 msgid "Build a given pool." msgstr "" #: tools/virsh.c:4034 #, c-format msgid "Pool %s built\n" msgstr "" #: tools/virsh.c:4036 #, fuzzy, c-format msgid "Failed to build pool %s" msgstr "도메인 %s를 중지하기 실패" #: tools/virsh.c:4049 #, fuzzy msgid "destroy a pool" msgstr "도메인 강제 종료 " #: tools/virsh.c:4050 #, fuzzy msgid "Destroy a given pool." msgstr "주어진 도메인 강제 종료.." #: tools/virsh.c:4073 #, fuzzy, c-format msgid "Pool %s destroyed\n" msgstr "%s 도메인 강제 종료\n" #: tools/virsh.c:4075 #, fuzzy, c-format msgid "Failed to destroy pool %s" msgstr "%s 도메인 강제 종료 실패 " #: tools/virsh.c:4088 msgid "delete a pool" msgstr "" #: tools/virsh.c:4089 #, fuzzy msgid "Delete a given pool." msgstr "주어진 도메인 강제 종료.." #: tools/virsh.c:4112 #, fuzzy, c-format msgid "Pool %s deleted\n" msgstr "%s 도메인 강제 종료\n" #: tools/virsh.c:4114 #, fuzzy, c-format msgid "Failed to delete pool %s" msgstr "%s 도메인 강제 종료 실패 " #: tools/virsh.c:4127 msgid "refresh a pool" msgstr "" #: tools/virsh.c:4128 msgid "Refresh a given pool." msgstr "" #: tools/virsh.c:4151 #, fuzzy, c-format msgid "Pool %s refreshed\n" msgstr "도메인 %s가 다시 시작됨\n" #: tools/virsh.c:4153 #, fuzzy, c-format msgid "Failed to refresh pool %s" msgstr "도메인 %s를 다시 시작하기 실패" #: tools/virsh.c:4166 #, fuzzy msgid "pool information in XML" msgstr "XML에 있는 도메인 정보" #: tools/virsh.c:4167 #, fuzzy msgid "Output the pool information as an XML dump to stdout." msgstr "XML 덤프로서의 도메인 정보를 표준 출력으로 출력." #: tools/virsh.c:4206 #, fuzzy msgid "list pools" msgstr "도메인 목록" #: tools/virsh.c:4207 #, fuzzy msgid "Returns list of pools." msgstr "도메인 목록 보기" #: tools/virsh.c:4212 #, fuzzy msgid "list inactive pools" msgstr "비활성화 도메인 보기" #: tools/virsh.c:4213 #, fuzzy msgid "list inactive & active pools" msgstr "비활성화 & 활성화 도메인 보기" #: tools/virsh.c:4233 tools/virsh.c:4241 #, fuzzy msgid "Failed to list active pools" msgstr "활성화 도메인 보기 실패" #: tools/virsh.c:4252 tools/virsh.c:4260 #, fuzzy msgid "Failed to list inactive pools" msgstr "비활성화 도메인 보기 실패" #: tools/virsh.c:4328 msgid "find potential storage pool sources" msgstr "" #: tools/virsh.c:4329 tools/virsh.c:4409 msgid "Returns XML document." msgstr "" #: tools/virsh.c:4335 msgid "type of storage pool sources to find" msgstr "" #: tools/virsh.c:4336 msgid "optional host to query" msgstr "" #: tools/virsh.c:4337 msgid "optional port to query" msgstr "" #: tools/virsh.c:4382 tools/virsh.c:8715 tools/virsh.c:8721 #, fuzzy msgid "Out of memory" msgstr "메모리 부족" #: tools/virsh.c:4385 #, c-format msgid "virAsprintf failed (errno %d)" msgstr "" #: tools/virsh.c:4394 tools/virsh.c:4445 #, fuzzy, c-format msgid "Failed to find any %s pool sources" msgstr "도메인 %s를 %s에 저장하기 실패" #: tools/virsh.c:4408 msgid "discover potential storage pool sources" msgstr "" #: tools/virsh.c:4415 msgid "type of storage pool sources to discover" msgstr "" #: tools/virsh.c:4417 msgid "optional file of source xml to query for pools" msgstr "" #: tools/virsh.c:4480 #, fuzzy msgid "storage pool information" msgstr "노드 정보" #: tools/virsh.c:4481 #, fuzzy msgid "Returns basic information about the storage pool." msgstr "노드에 관한 기본 정보 보기" #: tools/virsh.c:4519 msgid "building" msgstr "" #: tools/virsh.c:4523 tools/virsh.c:8273 tools/virsh.c:8299 msgid "running" msgstr "실행중" #: tools/virsh.c:4527 msgid "degraded" msgstr "" #: tools/virsh.c:4534 tools/virsh.c:5130 msgid "Capacity:" msgstr "" #: tools/virsh.c:4537 tools/virsh.c:5133 #, fuzzy msgid "Allocation:" msgstr "도메인 할당 중" #: tools/virsh.c:4540 msgid "Available:" msgstr "" #: tools/virsh.c:4555 #, fuzzy msgid "convert a pool UUID to pool name" msgstr "네트워크 UUID를 네트워크 이름으로 변환" #: tools/virsh.c:4561 #, fuzzy msgid "pool uuid" msgstr "도메인 uuid" #: tools/virsh.c:4586 #, fuzzy msgid "start a (previously defined) inactive pool" msgstr "(기존에 정의된) 비활성화 도메인 시작" #: tools/virsh.c:4587 #, fuzzy msgid "Start a pool." msgstr "도메인 시작" #: tools/virsh.c:4592 #, fuzzy msgid "name of the inactive pool" msgstr "비활성화 도메인명" #: tools/virsh.c:4609 #, fuzzy, c-format msgid "Pool %s started\n" msgstr "도메인 %s가 시작됨\n" #: tools/virsh.c:4612 #, fuzzy, c-format msgid "Failed to start pool %s" msgstr "도메인 %s 시작하기 실패" #: tools/virsh.c:4625 #, fuzzy msgid "create a volume from a set of args" msgstr "XML 파일에서 도메인 생성" #: tools/virsh.c:4626 tools/virsh.c:4822 #, fuzzy msgid "Create a vol." msgstr "도메인 생성" #: tools/virsh.c:4631 tools/virsh.c:4790 tools/virsh.c:4827 tools/virsh.c:4885 #, fuzzy msgid "pool name" msgstr "도메인명" #: tools/virsh.c:4632 #, fuzzy msgid "name of the volume" msgstr "비활성화 도메인명" #: tools/virsh.c:4633 msgid "size of the vol with optional k,M,G,T suffix" msgstr "" #: tools/virsh.c:4634 msgid "initial allocation size with optional k,M,G,T suffix" msgstr "" #: tools/virsh.c:4635 msgid "file format type raw,bochs,qcow,qcow2,vmdk" msgstr "" #: tools/virsh.c:4693 tools/virsh.c:4698 #, c-format msgid "Malformed size %s" msgstr "" #: tools/virsh.c:4726 #, fuzzy, c-format msgid "Vol %s created\n" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh.c:4730 #, fuzzy, c-format msgid "Failed to create vol %s" msgstr "XML 생성하기 실패" #: tools/virsh.c:4745 #, fuzzy msgid "undefine an inactive pool" msgstr "비활성화 도메인을 정의하지 않음" #: tools/virsh.c:4746 #, fuzzy msgid "Undefine the configuration for an inactive pool." msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: tools/virsh.c:4769 #, fuzzy, c-format msgid "Pool %s has been undefined\n" msgstr "도메인 %s는 정의되지 않음\n" #: tools/virsh.c:4771 #, fuzzy, c-format msgid "Failed to undefine pool %s" msgstr "도메인 %s를 정의하지 않기 실패" #: tools/virsh.c:4784 #, fuzzy msgid "convert a pool name to pool UUID" msgstr "네트워크 이름을 네트워크 UUID로 변환" #: tools/virsh.c:4810 #, fuzzy msgid "failed to get pool UUID" msgstr "도메인 UUID 보기 실패 " #: tools/virsh.c:4821 #, fuzzy msgid "create a vol from an XML file" msgstr "XML 파일에서 도메인 생성" #: tools/virsh.c:4828 tools/virsh.c:4886 #, fuzzy msgid "file containing an XML vol description" msgstr "XML 도메인 설명이 있는 파일" #: tools/virsh.c:4865 #, fuzzy, c-format msgid "Vol %s created from %s\n" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh.c:4869 tools/virsh.c:4926 #, fuzzy, c-format msgid "Failed to create vol from %s" msgstr "%s에서 도메인 생성하기 실패" #: tools/virsh.c:4879 msgid "create a vol, using another volume as input" msgstr "" #: tools/virsh.c:4880 #, fuzzy msgid "Create a vol from an existing volume." msgstr "XML 파일에서 도메인 생성" #: tools/virsh.c:4887 msgid "pool name or uuid of the input volume's pool" msgstr "" #: tools/virsh.c:4888 msgid "input vol name or key" msgstr "" #: tools/virsh.c:4923 #, fuzzy, c-format msgid "Vol %s created from input vol %s\n" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh.c:4978 msgid "clone a volume." msgstr "" #: tools/virsh.c:4979 msgid "Clone an existing volume." msgstr "" #: tools/virsh.c:4985 msgid "orig vol name or key" msgstr "" #: tools/virsh.c:4986 #, fuzzy msgid "clone name" msgstr "도메인명" #: tools/virsh.c:5008 #, fuzzy msgid "failed to get parent pool" msgstr "파일 열기 실패" #: tools/virsh.c:5029 #, fuzzy, c-format msgid "Vol %s cloned from %s\n" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh.c:5032 #, fuzzy, c-format msgid "Failed to clone vol from %s" msgstr "%s에서 도메인 생성하기 실패" #: tools/virsh.c:5055 msgid "delete a vol" msgstr "" #: tools/virsh.c:5056 #, fuzzy msgid "Delete a given vol." msgstr "주어진 도메인 강제 종료.." #: tools/virsh.c:5062 tools/virsh.c:5103 tools/virsh.c:5154 msgid "vol name, key or path" msgstr "" #: tools/virsh.c:5081 #, fuzzy, c-format msgid "Vol %s deleted\n" msgstr "%s 도메인 강제 종료\n" #: tools/virsh.c:5083 #, fuzzy, c-format msgid "Failed to delete vol %s" msgstr "%s 도메인 강제 종료 실패 " #: tools/virsh.c:5096 #, fuzzy msgid "storage vol information" msgstr "노드 정보" #: tools/virsh.c:5097 #, fuzzy msgid "Returns basic information about the storage vol." msgstr "노드에 관한 기본 정보 보기" #: tools/virsh.c:5125 #, fuzzy msgid "Type:" msgstr "OS 유형:" #: tools/virsh.c:5127 #, fuzzy msgid "file" msgstr "XML 파일" #: tools/virsh.c:5127 #, fuzzy msgid "block" msgstr "차단됨" #: tools/virsh.c:5147 #, fuzzy msgid "vol information in XML" msgstr "XML에 있는 도메인 정보" #: tools/virsh.c:5148 #, fuzzy msgid "Output the vol information as an XML dump to stdout." msgstr "XML 덤프로서의 도메인 정보를 표준 출력으로 출력." #: tools/virsh.c:5188 #, fuzzy msgid "list vols" msgstr "도메인 목록" #: tools/virsh.c:5189 #, fuzzy msgid "Returns list of vols by pool." msgstr "도메인 목록 보기" #: tools/virsh.c:5214 tools/virsh.c:5222 #, fuzzy msgid "Failed to list active vols" msgstr "활성화 도메인 보기 실패" #: tools/virsh.c:5230 msgid "Path" msgstr "" #: tools/virsh.c:5266 #, fuzzy msgid "convert a vol UUID to vol name" msgstr "네트워크 UUID를 네트워크 이름으로 변환" #: tools/virsh.c:5272 msgid "vol key or path" msgstr "" #: tools/virsh.c:5299 #, fuzzy msgid "convert a vol UUID to vol key" msgstr "네트워크 UUID를 네트워크 이름으로 변환" #: tools/virsh.c:5305 #, fuzzy msgid "vol uuid" msgstr "도메인 uuid" #: tools/virsh.c:5332 #, fuzzy msgid "convert a vol UUID to vol path" msgstr "네트워크 UUID를 네트워크 이름으로 변환" #: tools/virsh.c:5339 msgid "vol name or key" msgstr "" #: tools/virsh.c:5366 #, fuzzy msgid "define or modify a secret from an XML file" msgstr "XML 파일에서 네트워크를 정의함 (시작하지는 않음)" #: tools/virsh.c:5367 msgid "Define or modify a secret." msgstr "" #: tools/virsh.c:5372 msgid "file containing secret attributes in XML" msgstr "" #: tools/virsh.c:5397 #, fuzzy, c-format msgid "Failed to set attributes from %s" msgstr "도메인 %s 시작하기 실패" #: tools/virsh.c:5401 #, fuzzy msgid "Failed to get UUID of created secret" msgstr "소켓 %d에 읽기 실패\n" #: tools/virsh.c:5405 #, fuzzy, c-format msgid "Secret %s created\n" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh.c:5414 msgid "secret attributes in XML" msgstr "" #: tools/virsh.c:5415 #, fuzzy msgid "Output attributes of a secret as an XML dump to stdout." msgstr "XML 덤프로서의 네트워크 정보를 표준 출력으로 출력." #: tools/virsh.c:5420 tools/virsh.c:5460 tools/virsh.c:5519 tools/virsh.c:5571 msgid "secret UUID" msgstr "" #: tools/virsh.c:5454 msgid "set a secret value" msgstr "" #: tools/virsh.c:5455 msgid "Set a secret value." msgstr "" #: tools/virsh.c:5461 msgid "base64-encoded secret value" msgstr "" #: tools/virsh.c:5485 #, fuzzy msgid "Invalid base64 data" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: tools/virsh.c:5489 tools/virsh.c:5548 tools/virsh.c:6599 tools/virsh.c:6868 msgid "Failed to allocate memory" msgstr "메모리 할당 실패" #: tools/virsh.c:5498 #, fuzzy msgid "Failed to set secret value" msgstr "호스트명 보기 실패" #: tools/virsh.c:5501 msgid "Secret value set\n" msgstr "" #: tools/virsh.c:5513 msgid "Output a secret value" msgstr "" #: tools/virsh.c:5514 msgid "Output a secret value to stdout." msgstr "" #: tools/virsh.c:5565 #, fuzzy msgid "undefine a secret" msgstr "비활성화 도메인을 정의하지 않음" #: tools/virsh.c:5566 #, fuzzy msgid "Undefine a secret." msgstr "비활성화 도메인을 정의하지 않음" #: tools/virsh.c:5590 #, fuzzy, c-format msgid "Failed to delete secret %s" msgstr "'%s' 네트워크 보기 실패" #: tools/virsh.c:5593 #, fuzzy, c-format msgid "Secret %s deleted\n" msgstr "%s 도메인 강제 종료\n" #: tools/virsh.c:5605 #, fuzzy msgid "list secrets" msgstr "네트워크 목록" #: tools/virsh.c:5606 #, fuzzy msgid "Returns a list of secrets" msgstr "네트워크 목록 보기" #: tools/virsh.c:5621 tools/virsh.c:5628 #, fuzzy msgid "Failed to list secrets" msgstr "비활성화 도메인 보기 실패" #: tools/virsh.c:5635 #, fuzzy msgid "UUID" msgstr "UUID:" #: tools/virsh.c:5635 msgid "Usage" msgstr "" #: tools/virsh.c:5649 msgid "Volume" msgstr "" #: tools/virsh.c:5659 #, fuzzy msgid "Unused" msgstr "중지됨" #: tools/virsh.c:5673 msgid "show version" msgstr "버전 보여주기" #: tools/virsh.c:5674 msgid "Display the system version information." msgstr "시스템 버전 정보 보여주기." #: tools/virsh.c:5697 msgid "failed to get hypervisor type" msgstr "하이퍼바이저 유형 보기 실패" #: tools/virsh.c:5706 #, c-format msgid "Compiled against library: libvir %d.%d.%d\n" msgstr "라이브러리에 대해 컴파일됨: libvir %d.%d.%d\n" #: tools/virsh.c:5711 msgid "failed to get the library version" msgstr "라이브러리 버전 보기 실패" #: tools/virsh.c:5718 #, c-format msgid "Using library: libvir %d.%d.%d\n" msgstr "사용중인 라이브러리: libvir %d.%d.%d\n" #: tools/virsh.c:5725 #, c-format msgid "Using API: %s %d.%d.%d\n" msgstr "사용중인 API: %s %d.%d.%d\n" #: tools/virsh.c:5730 msgid "failed to get the hypervisor version" msgstr "하이퍼바이저 버전 보기 실패" #: tools/virsh.c:5735 #, c-format msgid "Cannot extract running %s hypervisor version\n" msgstr "실행중인 %s 하이퍼바이저 버전을 추출할 수 없음\n" #: tools/virsh.c:5742 #, c-format msgid "Running hypervisor: %s %d.%d.%d\n" msgstr "실행중인 하이퍼바이저: %s %d.%d.%d\n" #: tools/virsh.c:5752 #, fuzzy msgid "enumerate devices on this host" msgstr "도메인을 다른 호스트로 이전" #: tools/virsh.c:5758 #, fuzzy msgid "list devices in a tree" msgstr "장치 정보 부재" #: tools/virsh.c:5759 #, fuzzy msgid "capability name" msgstr "기능" #: tools/virsh.c:5860 #, fuzzy msgid "Failed to count node devices" msgstr "하이퍼바이저에 연결하기 실패" #: tools/virsh.c:5870 #, fuzzy msgid "Failed to list node devices" msgstr "비활성화 도메인 보기 실패" #: tools/virsh.c:5920 msgid "node device details in XML" msgstr "" #: tools/virsh.c:5921 #, fuzzy msgid "Output the node device details as an XML dump to stdout." msgstr "XML 덤프로서의 네트워크 정보를 표준 출력으로 출력." #: tools/virsh.c:5927 tools/virsh.c:5970 tools/virsh.c:6011 tools/virsh.c:6052 msgid "device key" msgstr "" #: tools/virsh.c:5943 tools/virsh.c:5986 tools/virsh.c:6027 tools/virsh.c:6068 msgid "Could not find matching device" msgstr "" #: tools/virsh.c:5963 #, fuzzy msgid "dettach node device from its device driver" msgstr "XML 파일에서 분리 장치" #: tools/virsh.c:5964 msgid "" "Dettach node device from its device driver before assigning to a domain." msgstr "" #: tools/virsh.c:5991 #, fuzzy, c-format msgid "Device %s dettached\n" msgstr "%s 도메인 강제 종료\n" #: tools/virsh.c:5993 #, fuzzy, c-format msgid "Failed to dettach device %s" msgstr "%s에서 장치 분리 실패" #: tools/virsh.c:6004 msgid "reattach node device to its device driver" msgstr "" #: tools/virsh.c:6005 msgid "Reattach node device to its device driver once released by the domain." msgstr "" #: tools/virsh.c:6032 #, c-format msgid "Device %s re-attached\n" msgstr "" #: tools/virsh.c:6034 #, fuzzy, c-format msgid "Failed to re-attach device %s" msgstr "%s에서 장치 부착하기 실패" #: tools/virsh.c:6045 #, fuzzy msgid "reset node device" msgstr "디스크 장치의 대상" #: tools/virsh.c:6046 #, fuzzy msgid "Reset node device before or after assigning to a domain." msgstr "실행 중인 도메인의 장치 블럭 상태 보기" #: tools/virsh.c:6073 #, fuzzy, c-format msgid "Device %s reset\n" msgstr "도메인 %s가 다시 시작됨\n" #: tools/virsh.c:6075 #, fuzzy, c-format msgid "Failed to reset device %s" msgstr "%s에서 장치 분리 실패" #: tools/virsh.c:6086 msgid "print the hypervisor hostname" msgstr "하이퍼바이저 호스트명 인쇄" #: tools/virsh.c:6101 msgid "failed to get hostname" msgstr "호스트명 보기 실패" #: tools/virsh.c:6115 msgid "print the hypervisor canonical URI" msgstr "하이퍼바이저 정규 URI 인쇄" #: tools/virsh.c:6130 msgid "failed to get URI" msgstr "URI 보기 실패" #: tools/virsh.c:6144 msgid "vnc display" msgstr "vnc 화면" #: tools/virsh.c:6145 msgid "Output the IP address and port number for the VNC display." msgstr "VNC 화면의 IP 주소 및 포트 번호 출력" #: tools/virsh.c:6219 msgid "tty console" msgstr "tty 콘솔" #: tools/virsh.c:6220 msgid "Output the device for the TTY console." msgstr "TTY 콘솔에 대한 장치 출력" #: tools/virsh.c:6280 msgid "attach device from an XML file" msgstr "XML 파일에서 장치 부착" #: tools/virsh.c:6281 msgid "Attach device from an XML ." msgstr "XML 파일에서 장치 부착 ." #: tools/virsh.c:6287 tools/virsh.c:6345 msgid "XML file" msgstr "XML 파일" #: tools/virsh.c:6308 msgid "attach-device: Missing option" msgstr "" #: tools/virsh.c:6322 #, c-format msgid "Failed to attach device from %s" msgstr "%s에서 장치 부착하기 실패" #: tools/virsh.c:6326 msgid "Device attached successfully\n" msgstr "" #: tools/virsh.c:6338 msgid "detach device from an XML file" msgstr "XML 파일에서 분리 장치" #: tools/virsh.c:6339 msgid "Detach device from an XML " msgstr "XML 파일에서의 분리 장치 " #: tools/virsh.c:6366 msgid "detach-device: Missing option" msgstr "" #: tools/virsh.c:6380 #, c-format msgid "Failed to detach device from %s" msgstr "%s에서 장치 분리 실패" #: tools/virsh.c:6384 msgid "Device detached successfully\n" msgstr "" #: tools/virsh.c:6396 msgid "attach network interface" msgstr "네트워크 인터페이스 부착" #: tools/virsh.c:6397 msgid "Attach new network interface." msgstr "새 네트워크 인터페이스 부착" #: tools/virsh.c:6403 tools/virsh.c:6519 msgid "network interface type" msgstr "네트워크 인터페이스 유형" #: tools/virsh.c:6404 msgid "source of network interface" msgstr "네트워크 인터페이스 소스" #: tools/virsh.c:6405 msgid "target network name" msgstr "대상 네트워크 이름" #: tools/virsh.c:6406 tools/virsh.c:6520 #, fuzzy msgid "MAC address" msgstr "MAC 주소" #: tools/virsh.c:6407 msgid "script used to bridge network interface" msgstr "네트워크 인터페이스를 연결하기 위해 사용된 스크립트" #: tools/virsh.c:6439 #, c-format msgid "No support %s in command 'attach-interface'" msgstr "'attach-interface' 명령에서 %s을(를) 지원하지 않음" #: tools/virsh.c:6495 msgid "Interface attached successfully\n" msgstr "" #: tools/virsh.c:6512 msgid "detach network interface" msgstr "네트워크 인터페이스 분리" #: tools/virsh.c:6513 msgid "Detach network interface." msgstr "네트워크 인터페이스 분리" #: tools/virsh.c:6558 tools/virsh.c:6563 msgid "Failed to get interface information" msgstr "인터페이스 정보 보기 실패" #: tools/virsh.c:6571 #, c-format msgid "No found interface whose type is %s" msgstr "유형이 %s인 인터페이스를 찾을 수 없음" #: tools/virsh.c:6593 #, c-format msgid "No found interface whose MAC address is %s" msgstr "MAC 주소가 %s인 인터페이스를 찾을 수 없음" #: tools/virsh.c:6604 tools/virsh.c:6873 msgid "Failed to create XML" msgstr "XML 생성하기 실패" #: tools/virsh.c:6612 msgid "Interface detached successfully\n" msgstr "" #: tools/virsh.c:6632 msgid "attach disk device" msgstr "디스크 장치 부착" #: tools/virsh.c:6633 msgid "Attach new disk device." msgstr "새 디스크 장치 부착" #: tools/virsh.c:6639 msgid "source of disk device" msgstr "디스크 장치의 소스" #: tools/virsh.c:6640 tools/virsh.c:6796 msgid "target of disk device" msgstr "디스크 장치의 대상" #: tools/virsh.c:6641 msgid "driver of disk device" msgstr "디스크 장치의 드라이버" #: tools/virsh.c:6642 msgid "subdriver of disk device" msgstr "디스크 장치의 하부 드라이버" #: tools/virsh.c:6643 msgid "target device type" msgstr "대상 장치 유형" #: tools/virsh.c:6644 msgid "mode of device reading and writing" msgstr "읽기 및 쓰기 장치 모드" #: tools/virsh.c:6677 tools/virsh.c:6684 #, c-format msgid "No support %s in command 'attach-disk'" msgstr "'attach-disk' 명령에서 %s을(를) 지원하지 않음" #: tools/virsh.c:6773 msgid "Disk attached successfully\n" msgstr "" #: tools/virsh.c:6789 msgid "detach disk device" msgstr "디스크 장치 분리" #: tools/virsh.c:6790 msgid "Detach disk device." msgstr "디스크 장치 분리" #: tools/virsh.c:6831 tools/virsh.c:6836 tools/virsh.c:6843 msgid "Failed to get disk information" msgstr "디스크 정보 보기 실패" #: tools/virsh.c:6862 #, c-format msgid "No found disk whose target is %s" msgstr "대상이 %s인 디스크를 찾을 수 없음" #: tools/virsh.c:6881 msgid "Disk detached successfully\n" msgstr "" #: tools/virsh.c:6901 msgid "compare host CPU with a CPU described by an XML file" msgstr "" #: tools/virsh.c:6902 msgid "compare CPU with host CPU" msgstr "" #: tools/virsh.c:6907 #, fuzzy msgid "file containing an XML CPU description" msgstr "XML 도메인 설명이 있는 파일" #: tools/virsh.c:6935 #, c-format msgid "CPU described in %s is incompatible with host CPU\n" msgstr "" #: tools/virsh.c:6941 #, c-format msgid "CPU described in %s is identical to host CPU\n" msgstr "" #: tools/virsh.c:6947 #, c-format msgid "Host CPU is a superset of CPU described in %s\n" msgstr "" #: tools/virsh.c:6954 #, fuzzy, c-format msgid "Failed to compare host CPU with %s" msgstr "소켓 %d를 닫기 실패\n" #: tools/virsh.c:6971 #, fuzzy, c-format msgid "malloc: failed to allocate temporary file name: %s" msgstr "노드 할당 실패" #: tools/virsh.c:6981 #, fuzzy, c-format msgid "mkstemp: failed to create temporary file: %s" msgstr "로그 파일 쓰기 실패" #: tools/virsh.c:6988 #, fuzzy, c-format msgid "write: %s: failed to write to temporary file: %s" msgstr "로그 파일 쓰기 실패" #: tools/virsh.c:6996 #, fuzzy, c-format msgid "close: %s: failed to write or close temporary file: %s" msgstr "로그 파일 쓰기 실패" #: tools/virsh.c:7026 #, c-format msgid "" "%s: $EDITOR environment variable contains shell meta or other unacceptable " "characters" msgstr "" #: tools/virsh.c:7034 #, c-format msgid "" "%s: temporary filename contains shell meta or other unacceptable characters " "(is $TMPDIR wrong?)" msgstr "" #: tools/virsh.c:7042 #, c-format msgid "virAsprintf: could not create editing command: %s" msgstr "" #: tools/virsh.c:7050 #, fuzzy, c-format msgid "%s: edit command failed: %s" msgstr "로그 파일 쓰기 실패" #: tools/virsh.c:7056 #, c-format msgid "%s: command exited with non-zero status" msgstr "" #: tools/virsh.c:7071 #, fuzzy, c-format msgid "%s: failed to read temporary file: %s" msgstr "로그 파일 쓰기 실패" #: tools/virsh.c:7084 #, fuzzy msgid "change the current directory" msgstr "현재 도메인 메모리" #: tools/virsh.c:7085 #, fuzzy msgid "Change the current directory." msgstr "현재 도메인 메모리" #: tools/virsh.c:7090 msgid "directory to switch to (default: home or else root)" msgstr "" #: tools/virsh.c:7101 msgid "cd: command valid only in interactive mode" msgstr "" #: tools/virsh.c:7114 #, c-format msgid "cd: %s: %s" msgstr "" #: tools/virsh.c:7128 #, fuzzy msgid "print the current directory" msgstr "현재 도메인 메모리" #: tools/virsh.c:7129 #, fuzzy msgid "Print the current directory." msgstr "현재 도메인 메모리" #: tools/virsh.c:7152 #, c-format msgid "pwd: cannot get current directory: %s" msgstr "" #: tools/virsh.c:7155 #, c-format msgid "%s\n" msgstr "" #: tools/virsh.c:7166 #, fuzzy msgid "edit XML configuration for a domain" msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: tools/virsh.c:7167 #, fuzzy msgid "Edit the XML configuration for a domain." msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: tools/virsh.c:7218 #, c-format msgid "Domain %s XML configuration not changed.\n" msgstr "" #: tools/virsh.c:7244 #, fuzzy, c-format msgid "Domain %s XML configuration edited.\n" msgstr "설정 파일 읽기 실패" #: tools/virsh.c:7269 #, fuzzy msgid "edit XML configuration for a network" msgstr "비활성화 네트워크 설정을 정의하지 않음" #: tools/virsh.c:7270 #, fuzzy msgid "Edit the XML configuration for a network." msgstr "비활성화 네트워크 설정을 정의하지 않음" #: tools/virsh.c:7286 #, fuzzy msgid "edit XML configuration for a storage pool" msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: tools/virsh.c:7287 #, fuzzy msgid "Edit the XML configuration for a storage pool." msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: tools/virsh.c:7303 msgid "quit this interactive terminal" msgstr "대화식 터미널 종료" #: tools/virsh.c:7523 #, c-format msgid "command '%s' requires <%s> option" msgstr "'%s' 명령은 <%s> 옵션이 필요함" #: tools/virsh.c:7524 #, c-format msgid "command '%s' requires --%s option" msgstr "'%s' 명령은 --%s 옵션이 필요함" #: tools/virsh.c:7551 #, c-format msgid "command '%s' doesn't exist" msgstr "'%s' 명령이 존재하지 않음" #: tools/virsh.c:7558 msgid " NAME\n" msgstr " 이름\n" #: tools/virsh.c:7561 msgid "" "\n" " SYNOPSIS\n" msgstr "" "\n" " 시놉시스\n" #: tools/virsh.c:7570 #, fuzzy, c-format msgid "[--%s ]" msgstr "--%s " #: tools/virsh.c:7572 #, fuzzy, c-format msgid "[--%s ]" msgstr "--%s " #: tools/virsh.c:7585 msgid "" "\n" " DESCRIPTION\n" msgstr "" "\n" " 설명\n" #: tools/virsh.c:7591 msgid "" "\n" " OPTIONS\n" msgstr "" "\n" " 옵션\n" #: tools/virsh.c:7596 #, c-format msgid "--%s " msgstr "--%s " #: tools/virsh.c:7598 #, c-format msgid "--%s " msgstr "--%s " #: tools/virsh.c:7750 #, c-format msgid "internal error: virsh %s: no %s VSH_OT_DATA option" msgstr "" #: tools/virsh.c:7767 msgid "undefined domain name or id" msgstr "정의되지 않은 도메인명 또는 id" #: tools/virsh.c:7799 #, c-format msgid "failed to get domain '%s'" msgstr "'%s' 도메인 보기 실패" #: tools/virsh.c:7815 msgid "undefined network name" msgstr "정의되지 않은 네트워크 이름" #: tools/virsh.c:7839 #, c-format msgid "failed to get network '%s'" msgstr "'%s' 네트워크 보기 실패" #: tools/virsh.c:7855 #, fuzzy msgid "undefined interface identifier" msgstr "비활성화 네트워크를 정의하지 않음" #: tools/virsh.c:7879 #, fuzzy, c-format msgid "failed to get interface '%s'" msgstr "'%s' 네트워크 보기 실패" #: tools/virsh.c:7892 tools/virsh.c:7938 #, fuzzy msgid "undefined pool name" msgstr "정의되지 않은 네트워크 이름" #: tools/virsh.c:7916 #, fuzzy, c-format msgid "failed to get pool '%s'" msgstr "'%s' 도메인 보기 실패" #: tools/virsh.c:7933 #, fuzzy msgid "undefined vol name" msgstr "정의되지 않은 네트워크 이름" #: tools/virsh.c:7969 #, fuzzy, c-format msgid "failed to get vol '%s'" msgstr "'%s' 도메인 보기 실패" #: tools/virsh.c:7989 #, fuzzy msgid "undefined secret UUID" msgstr "%s에 연결할 수 없음" #: tools/virsh.c:8001 #, fuzzy, c-format msgid "failed to get secret '%s'" msgstr "'%s' 네트워크 보기 실패" #: tools/virsh.c:8032 #, c-format msgid "" "\n" "(Time: %.3f ms)\n" "\n" msgstr "" "\n" "(시간: %.3f ms)\n" "\n" #: tools/virsh.c:8106 msgid "missing \"" msgstr "부재 \"" #: tools/virsh.c:8167 #, c-format msgid "unexpected token (command name): '%s'" msgstr "예상외의 토큰 (명령 이름): '%s'" #: tools/virsh.c:8172 #, c-format msgid "unknown command: '%s'" msgstr "알려지지 않은 명령: '%s'" #: tools/virsh.c:8179 #, c-format msgid "command '%s' doesn't support option --%s" msgstr "명령 '%s'는 --%s 옵션을 지원하지 않음" #: tools/virsh.c:8193 #, c-format msgid "expected syntax: --%s <%s>" msgstr "예상된 구문: --%s <%s>" #: tools/virsh.c:8196 msgid "number" msgstr "숫자" #: tools/virsh.c:8196 msgid "string" msgstr "문자열" #: tools/virsh.c:8202 #, c-format msgid "unexpected data '%s'" msgstr "예상외의 데이터 '%s'" #: tools/virsh.c:8224 msgid "OPTION" msgstr "옵션" #: tools/virsh.c:8224 msgid "DATA" msgstr "데이터" #: tools/virsh.c:8275 tools/virsh.c:8297 msgid "idle" msgstr "" #: tools/virsh.c:8277 msgid "paused" msgstr "중지됨" #: tools/virsh.c:8279 msgid "in shutdown" msgstr "종료중" #: tools/virsh.c:8281 msgid "shut off" msgstr "종료" #: tools/virsh.c:8283 msgid "crashed" msgstr "충돌됨" #: tools/virsh.c:8295 msgid "offline" msgstr "오프라인" #: tools/virsh.c:8314 msgid "no valid connection" msgstr "유효하지 않은 연결" #: tools/virsh.c:8360 msgid "error: " msgstr "오류:" #: tools/virsh.c:8376 tools/virsh.c:8388 tools/virsh.c:8401 #, c-format msgid "%s: %d: failed to allocate %d bytes" msgstr "%s: %d: %d 바이트 할당 실패" #: tools/virsh.c:8415 #, c-format msgid "%s: %d: failed to allocate %lu bytes" msgstr "%s: %d: %lu 바이트 할당 실패" #: tools/virsh.c:8445 msgid "failed to connect to the hypervisor" msgstr "하이퍼바이저에 연결 실패" #: tools/virsh.c:8477 msgid "failed to get the log file information" msgstr "로그 파일 정보 보기 실패" #: tools/virsh.c:8482 msgid "the log path is not a file" msgstr "로그 경로가 파일이 아님" #: tools/virsh.c:8490 msgid "failed to open the log file. check the log file path" msgstr "로그 파일 열기 실패. 로그 파일 경로 확인" #: tools/virsh.c:8559 msgid "failed to write the log file" msgstr "로그 파일 쓰기 실패" #: tools/virsh.c:8574 #, fuzzy, c-format msgid "%s: failed to write log file: %s" msgstr "로그 파일 쓰기 실패" #: tools/virsh.c:8739 #, fuzzy, c-format msgid "Failed to create '%s': %s" msgstr "XML 생성하기 실패" #: tools/virsh.c:8802 #, fuzzy msgid "failed to disconnect from the hypervisor" msgstr "하이퍼바이저에서 연결 끊기 실패" #: tools/virsh.c:8817 #, c-format msgid "" "\n" "%s [options] [commands]\n" "\n" " options:\n" " -c | --connect hypervisor connection URI\n" " -r | --readonly connect readonly\n" " -d | --debug debug level [0-5]\n" " -h | --help this help\n" " -q | --quiet quiet mode\n" " -t | --timing print timing information\n" " -l | --log output logging to file\n" " -v | --version program version\n" "\n" " commands (non interactive mode):\n" msgstr "" "\n" "%s [옵션] [명령]\n" "\n" " 옵션:\n" " -c | --connect 하이퍼바이저 연결 URI\n" " -r | --readonly 읽기 전용 연결\n" " -d | --debug 디버그 레벨 [0-5]\n" " -h | --help 도움말\n" " -q | --quiet 정숙 모드\n" " -t | --timing 시간 정보 인쇄\n" " -l | --log 파일에 출력 기록\n" " -v | --version 프로그램 버전\n" "\n" " 명령 (비대화식 모드):\n" #: tools/virsh.c:8835 msgid "" "\n" " (specify help for details about the command)\n" "\n" msgstr "" "\n" " (명령에 대한 정보를 보기 위해 help 를 지정)\n" "\n" #: tools/virsh.c:8927 #, c-format msgid "unsupported option '-%c'. See --help." msgstr "지원되지 않는 옵션 '-%c'. --help 참조." #: tools/virsh.c:8934 #, c-format msgid "extra argument '%s'. See --help." msgstr "" #: tools/virsh.c:9018 #, c-format msgid "" "Welcome to %s, the virtualization interactive terminal.\n" "\n" msgstr "" "%s, 가상화 대화식 터미널에 오신 것을 환영합니다.\n" "\n" #: tools/virsh.c:9021 msgid "" "Type: 'help' for help with commands\n" " 'quit' to quit\n" "\n" msgstr "" "입력: 명령을 사용하여 문제 해결을 위해 'help' 입력\n" " 종료하기 위해 'quit'입력\n" "\n" #, fuzzy #~ msgid "out of memory in strdup" #~ msgstr "메모리 부족" #, fuzzy #~ msgid "node_device not found" #~ msgstr "도메인을 찾을 수 없음" #, fuzzy #~ msgid "Missing CPU model" #~ msgstr "보안 모델 부재 " #~ msgid "cannot parse domain %s" #~ msgstr "도메인 %s을(를) 구문 분석할 수 없음 " #, fuzzy #~ msgid "interface has no type" #~ msgstr "네트워크 인터페이스 유형" #, fuzzy #~ msgid "bare interface type %d unknown" #~ msgstr "네트워크 인터페이스 유형" #, fuzzy #~ msgid "Failed to autostart VM '%s': %s\n" #~ msgstr "'%s' 열기 실패: %s" #, fuzzy #~ msgid "Unable to write envv to logfile: %s\n" #~ msgstr "로그 파일 쓰기 실패" #, fuzzy #~ msgid "Unable to write argv to logfile: %s\n" #~ msgstr "로그 파일 쓰기 실패" #, fuzzy #~ msgid "Failed to run '%s %s': %s" #~ msgstr "'%s' 열기 실패: %s" #, fuzzy #~ msgid "Failed to read " #~ msgstr "XML 생성하기 실패" #, fuzzy #~ msgid "Failed to write to " #~ msgstr "소켓 %d에 쓰기 실패\n" #, fuzzy #~ msgid "Failed to saves iptables rules to %s : %s" #~ msgstr "도메인 %s를 %s에 저장하기 실패" #~ msgid "listen: %s" #~ msgstr "청취: %s " #, fuzzy #~ msgid "failed to lock capabilities: %d" #~ msgstr "기능 전환 실패" #, fuzzy #~ msgid "failed to allocate veth names" #~ msgstr "노드 할당 실패" #, fuzzy #~ msgid "Failed to unlink status file %s" #~ msgstr "%s %s 블럭 상태 보기 실패" #, fuzzy #~ msgid "Failed to copy secModel model: %s" #~ msgstr "'%s' 열기 실패: 읽기: %s" #, fuzzy #~ msgid "Failed to copy secModel DOI: %s" #~ msgstr "'%s' 열기 실패: %s" #, fuzzy #~ msgid "could not generate random UUID" #~ msgstr "도메인 UUID 보기 실패 " #, fuzzy #~ msgid "Error allocating callbacks list" #~ msgstr "메모리 할당 오류: %s" #, fuzzy #~ msgid "Error allocating domainEvents" #~ msgstr "도메인 할당 중" #, fuzzy #~ msgid "out of memory allocating array" #~ msgstr "메모리 할당 변경" #, fuzzy #~ msgid "domain with uuid '%s' is already defined" #~ msgstr "이미 %s 도메인이 존재함" #, fuzzy #~ msgid "no memory" #~ msgstr "노드 메모리" #, fuzzy #~ msgid "unable to resolve name %s" #~ msgstr "%s에서 도메인을 복구하기 실패" #, fuzzy #~ msgid "failed to allocate configInfoList" #~ msgstr "노드 할당 실패" #, fuzzy #~ msgid "failed to allocate activeDomainList" #~ msgstr "활성화 도메인 보기 실패" #, fuzzy #~ msgid "failed to allocate xsWatchList" #~ msgstr "노드 할당 실패" #, fuzzy #~ msgid "reallocating list" #~ msgstr "도메인 할당 중" #, fuzzy #~ msgid "migrate operation failed" #~ msgstr "작업 실패" #, fuzzy #~ msgid "could not change cdrom media" #~ msgstr "%s에 연결할 수 없음" #, fuzzy #~ msgid "adding usb disk failed" #~ msgstr "호스트 정의 파일을 읽어오는중" #, fuzzy #~ msgid "failed to add network backend with '%s'" #~ msgstr "'%s' 네트워크 보기 실패" #, fuzzy #~ msgid "failed to execute detach disk %s command" #~ msgstr "노드 정보 보기 실패" #, fuzzy #~ msgid "cannot detach host pci device" #~ msgstr "디스크 장치 부착" #, fuzzy #~ msgid "device not found: %s (%s)" #~ msgstr "도메인을 찾을 수 없음: %s" #, fuzzy #~ msgid "unexpected sound model %s" #~ msgstr "예상외의 dict 노드" #, fuzzy #~ msgid "Connection failed." #~ msgstr "작업 실패" #, fuzzy #~ msgid "Authentication failed: %s" #~ msgstr "작업 실패: %s"