# translation of zh_TW.po to Traditional Chinese # Translation of zh_TW.po to Chinese, Traditional # Copyright (C) 2006, 2007 Free Software Foundation, Inc. # This file is distributed under the same license as the PACKAGE package. # # Chester Cheng , 2006, 2007. msgid "" msgstr "" "Project-Id-Version: zh_TW\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-08-12 09:55+0200\n" "PO-Revision-Date: 2007-04-10 16:18+1000\n" "Last-Translator: Chester Cheng \n" "Language-Team: Traditional Chinese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" #: gnulib/lib/gai_strerror.c:44 msgid "Address family for hostname not supported" msgstr "" #: gnulib/lib/gai_strerror.c:45 msgid "Temporary failure in name resolution" msgstr "" #: gnulib/lib/gai_strerror.c:46 msgid "Bad value for ai_flags" msgstr "" #: gnulib/lib/gai_strerror.c:47 msgid "Non-recoverable failure in name resolution" msgstr "" #: gnulib/lib/gai_strerror.c:48 #, fuzzy msgid "ai_family not supported" msgstr "呼叫函式庫失敗，可能並不支援" #: gnulib/lib/gai_strerror.c:49 #, fuzzy msgid "Memory allocation failure" msgstr "改變記憶體分配" #: gnulib/lib/gai_strerror.c:50 msgid "No address associated with hostname" msgstr "" #: gnulib/lib/gai_strerror.c:51 msgid "Name or service not known" msgstr "" #: gnulib/lib/gai_strerror.c:52 msgid "Servname not supported for ai_socktype" msgstr "" #: gnulib/lib/gai_strerror.c:53 msgid "ai_socktype not supported" msgstr "" #: gnulib/lib/gai_strerror.c:54 #, fuzzy msgid "System error" msgstr "系統呼叫錯誤" #: gnulib/lib/gai_strerror.c:55 msgid "Argument buffer too small" msgstr "" #: gnulib/lib/gai_strerror.c:57 msgid "Processing request in progress" msgstr "" #: gnulib/lib/gai_strerror.c:58 msgid "Request canceled" msgstr "" #: gnulib/lib/gai_strerror.c:59 msgid "Request not canceled" msgstr "" #: gnulib/lib/gai_strerror.c:60 msgid "All requests done" msgstr "" #: gnulib/lib/gai_strerror.c:61 msgid "Interrupted by a signal" msgstr "" #: gnulib/lib/gai_strerror.c:62 msgid "Parameter string not correctly encoded" msgstr "" #: gnulib/lib/gai_strerror.c:74 #, fuzzy msgid "Unknown error" msgstr "未知的主機" #: qemud/qemud.c:142 src/remote_internal.c:887 #, c-format msgid "Cannot access %s '%s': %s (%d)" msgstr "" #: qemud/qemud.c:159 #, c-format msgid "gnutls_certificate_allocate_credentials: %s" msgstr "" #: qemud/qemud.c:172 #, c-format msgid "gnutls_certificate_set_x509_trust_file: %s" msgstr "" #: qemud/qemud.c:186 #, c-format msgid "gnutls_certificate_set_x509_crl_file: %s" msgstr "" #: qemud/qemud.c:204 #, c-format msgid "gnutls_certificate_set_x509_key_file: %s" msgstr "" #: qemud/qemud.c:217 #, c-format msgid "gnutls_dh_params_init: %s" msgstr "" #: qemud/qemud.c:223 #, c-format msgid "gnutls_dh_params_generate2: %s" msgstr "" #: qemud/qemud.c:241 #, fuzzy, c-format msgid "Failed to read from signal pipe: %s" msgstr "無法讀取描述檔 %s" #: qemud/qemud.c:250 #, fuzzy msgid "Reloading configuration on SIGHUP" msgstr "分配設定" #: qemud/qemud.c:252 #, fuzzy msgid "Error while reloading drivers" msgstr "分配網路" #: qemud/qemud.c:258 #, c-format msgid "Shutting down on signal %d" msgstr "" #: qemud/qemud.c:264 #, c-format msgid "Received signal %d, dispatching to drivers" msgstr "" #: qemud/qemud.c:284 src/util.c:142 src/util.c:154 msgid "Failed to set close-on-exec file descriptor flag" msgstr "" #: qemud/qemud.c:299 src/util.c:138 src/util.c:150 msgid "Failed to set non-blocking file descriptor flag" msgstr "" #: qemud/qemud.c:440 #, fuzzy, c-format msgid "Failed to open pid file '%s' : %s" msgstr "無法暫停區域 %s" #: qemud/qemud.c:446 #, fuzzy, c-format msgid "Failed to fdopen pid file '%s' : %s" msgstr "無法暫停區域 %s" #: qemud/qemud.c:453 #, fuzzy, c-format msgid "Failed to write to pid file '%s' : %s" msgstr "無法暫停區域 %s" #: qemud/qemud.c:460 #, fuzzy, c-format msgid "Failed to close pid file '%s' : %s" msgstr "無法暫停區域 %s" #: qemud/qemud.c:477 #, fuzzy msgid "Failed to allocate memory for struct qemud_socket" msgstr "無法分配節點" #: qemud/qemud.c:487 #, fuzzy, c-format msgid "Failed to create socket: %s" msgstr "無法讀取插槽 %d\n" #: qemud/qemud.c:509 #, fuzzy, c-format msgid "Failed to bind socket to '%s': %s" msgstr "無法暫停區域 %s" #: qemud/qemud.c:518 #, fuzzy, c-format msgid "Failed to listen for connections on '%s': %s" msgstr "無法暫停區域 %s" #: qemud/qemud.c:527 qemud/qemud.c:656 msgid "Failed to add server event callback" msgstr "" #: qemud/qemud.c:556 #, c-format msgid "getaddrinfo: %s\n" msgstr "" #: qemud/qemud.c:565 #, c-format msgid "socket: %s" msgstr "" #: qemud/qemud.c:574 #, c-format msgid "bind: %s" msgstr "" #: qemud/qemud.c:581 #, c-format msgid "listen: %s" msgstr "" #: qemud/qemud.c:617 #, c-format msgid "remoteListenTCP: calloc: %s" msgstr "" #: qemud/qemud.c:648 #, c-format msgid "remoteListenTCP: listen: %s" msgstr "" #: qemud/qemud.c:695 #, fuzzy, c-format msgid "Failed to find user record for uid '%d': %s" msgstr "無法為網路 %s 取消定義" #: qemud/qemud.c:712 msgid "Resulting path too long for buffer in qemudInitPaths()" msgstr "" #: qemud/qemud.c:720 #, fuzzy msgid "Failed to allocate struct qemud_server" msgstr "無法分配節點" #: qemud/qemud.c:764 #, fuzzy, c-format msgid "Failed to initialize SASL authentication %s" msgstr "無法為網路 %s 取消定義" #: qemud/qemud.c:779 #, fuzzy, c-format msgid "Failed to connect to system bus for PolicyKit auth: %s" msgstr "無法連上 hypervisor" #: qemud/qemud.c:890 #, c-format msgid "remoteInitializeTLSSession: %s" msgstr "" #: qemud/qemud.c:907 #, c-format msgid "remoteCheckDN: gnutls_x509_cert_get_dn: %s" msgstr "" #: qemud/qemud.c:926 #, c-format msgid "remoteCheckDN: failed: client DN is %s" msgstr "" #: qemud/qemud.c:942 #, fuzzy, c-format msgid "remoteCheckCertificate: verify failed: %s" msgstr "操作失敗：%s" #: qemud/qemud.c:950 msgid "remoteCheckCertificate: the client certificate is not trusted." msgstr "" #: qemud/qemud.c:955 msgid "remoteCheckCertificate: the client certificate has unknown issuer." msgstr "" #: qemud/qemud.c:960 msgid "remoteCheckCertificate: the client certificate has been revoked." msgstr "" #: qemud/qemud.c:966 msgid "" "remoteCheckCertificate: the client certificate uses an insecure algorithm." msgstr "" #: qemud/qemud.c:975 msgid "remoteCheckCertificate: certificate is not X.509" msgstr "" #: qemud/qemud.c:980 msgid "remoteCheckCertificate: no peers" msgstr "" #: qemud/qemud.c:991 msgid "remoteCheckCertificate: gnutls_x509_crt_init failed" msgstr "" #: qemud/qemud.c:1001 msgid "remoteCheckCertificate: the client certificate has expired" msgstr "" #: qemud/qemud.c:1008 msgid "remoteCheckCertificate: the client certificate is not yet activated" msgstr "" #: qemud/qemud.c:1017 msgid "" "remoteCheckCertificate: client's Distinguished Name is not on the list of " "allowed clients (tls_allowed_dn_list). Use 'openssl x509 -in clientcert.pem " "-text' to view the Distinguished Name field in the client certificate, or " "run this daemon with --verbose option." msgstr "" #: qemud/qemud.c:1034 msgid "remoteCheckCertificate: failed to verify client's certificate" msgstr "" #: qemud/qemud.c:1038 msgid "" "remoteCheckCertificate: tls_no_verify_certificate is set so the bad " "certificate is ignored" msgstr "" #: qemud/qemud.c:1060 #, fuzzy, c-format msgid "Failed to verify client credentials: %s" msgstr "無法取得節點資訊" #: qemud/qemud.c:1085 #, fuzzy, c-format msgid "Failed to accept connection: %s" msgstr "無法開啟網路 %s" #: qemud/qemud.c:1123 #, c-format msgid "Turn off polkit auth for privileged client %d" msgstr "" #: qemud/qemud.c:1162 qemud/qemud.c:1399 qemud/qemud.c:1537 #, fuzzy, c-format msgid "TLS handshake failed: %s" msgstr "GET 操作失敗：%s" #: qemud/qemud.c:1227 #, c-format msgid "read: %s" msgstr "" #: qemud/qemud.c:1240 #, c-format msgid "gnutls_record_recv: %s" msgstr "" #: qemud/qemud.c:1423 #, c-format msgid "write: %s" msgstr "" #: qemud/qemud.c:1433 #, c-format msgid "gnutls_record_send: %s" msgstr "" #: qemud/qemud.c:1645 #, c-format msgid "Signal handler reported %d errors: last error: %s" msgstr "" #: qemud/qemud.c:1741 qemud/qemud.c:1762 #, fuzzy, c-format msgid "failed to allocate memory for %s config list" msgstr "無法分配節點" #: qemud/qemud.c:1748 qemud/qemud.c:1779 #, fuzzy, c-format msgid "failed to allocate memory for %s config list value" msgstr "無法分配節點" #: qemud/qemud.c:1767 qemud/qemud.c:1790 #, c-format msgid "remoteReadConfigFile: %s: %s: must be a string or list of strings\n" msgstr "" #: qemud/qemud.c:1807 #, c-format msgid "remoteReadConfigFile: %s: %s: invalid type: got %s; expected %s\n" msgstr "" #: qemud/qemud.c:1828 #, c-format msgid "remoteReadConfigFile: %s\n" msgstr "" #: qemud/qemud.c:1872 #, c-format msgid "remoteReadConfigFile: %s: %s: unsupported auth %s\n" msgstr "" #: qemud/qemud.c:1957 msgid "Cannot set group when not running as root" msgstr "" #: qemud/qemud.c:1961 #, fuzzy, c-format msgid "Failed to lookup group '%s'" msgstr "無法暫停區域 %s" #: qemud/qemud.c:1974 qemud/qemud.c:1985 #, fuzzy, c-format msgid "Failed to parse mode '%s'" msgstr "無法暫停區域 %s" #: qemud/qemud.c:2158 #, fuzzy, c-format msgid "Failed to fork as daemon: %s" msgstr "無法繼續區域 %s" #: qemud/qemud.c:2180 #, fuzzy, c-format msgid "Failed to create pipe: %s" msgstr "無法讀取插槽 %d\n" #: qemud/qemud.c:2213 #, fuzzy, c-format msgid "Failed to change group ownership of %s" msgstr "無法將區域 %s 的核心傾印至 %s" #: qemud/qemud.c:2222 msgid "Failed to register callback for signal pipe" msgstr "" #: qemud/remote.c:102 msgid "xdr_remote_message_header" msgstr "" #: qemud/remote.c:110 #, c-format msgid "program mismatch (actual %x, expected %x)" msgstr "" #: qemud/remote.c:117 #, c-format msgid "version mismatch (actual %x, expected %x)" msgstr "" #: qemud/remote.c:123 #, c-format msgid "direction (%d) != REMOTE_CALL" msgstr "" #: qemud/remote.c:129 #, c-format msgid "status (%d) != REMOTE_OK" msgstr "" #: qemud/remote.c:145 #, fuzzy msgid "authentication required" msgstr "操作失敗" #: qemud/remote.c:158 #, fuzzy, c-format msgid "unknown procedure: %d" msgstr "收到未知的 HTTP 錯誤碼 %d" #: qemud/remote.c:166 #, fuzzy msgid "parse args failed" msgstr "無法解析伺服器的回應" #: qemud/remote.c:182 #, c-format msgid "internal error - dispatch function returned invalid code %d" msgstr "" #: qemud/remote.c:204 msgid "dummy length" msgstr "" #: qemud/remote.c:211 msgid "serialise reply header" msgstr "" #: qemud/remote.c:220 msgid "serialise return struct" msgstr "" #: qemud/remote.c:275 msgid "serialise return error" msgstr "" #: qemud/remote.c:284 msgid "xdr_setpos" msgstr "" #: qemud/remote.c:290 msgid "serialise return length" msgstr "" #: qemud/remote.c:424 msgid "connection already open" msgstr "" #: qemud/remote.c:450 #, fuzzy msgid "connection not open" msgstr "無效的連線指標，於 " #: qemud/remote.c:497 #, fuzzy msgid "out of memory in strdup" msgstr "記憶體不足" #: qemud/remote.c:608 msgid "maxCells > REMOTE_NODE_MAX_CELLS" msgstr "" #: qemud/remote.c:663 qemud/remote.c:705 qemud/remote.c:809 qemud/remote.c:835 #: qemud/remote.c:869 qemud/remote.c:908 qemud/remote.c:956 #: qemud/remote.c:1000 qemud/remote.c:1024 qemud/remote.c:1086 #: qemud/remote.c:1110 qemud/remote.c:1135 qemud/remote.c:1161 #: qemud/remote.c:1186 qemud/remote.c:1218 qemud/remote.c:1243 #: qemud/remote.c:1268 qemud/remote.c:1297 qemud/remote.c:1421 #: qemud/remote.c:1574 qemud/remote.c:1607 qemud/remote.c:1646 #: qemud/remote.c:1670 qemud/remote.c:1694 qemud/remote.c:1718 #: qemud/remote.c:1742 qemud/remote.c:1766 qemud/remote.c:1790 #: qemud/remote.c:1814 qemud/remote.c:1838 qemud/remote.c:1862 #, fuzzy msgid "domain not found" msgstr "區域資訊" #: qemud/remote.c:694 qemud/remote.c:776 msgid "nparams too large" msgstr "" #: qemud/remote.c:742 #, fuzzy msgid "unknown type" msgstr "未知的作業系統類型" #: qemud/remote.c:919 qemud/remote.c:965 msgid "size > maximum buffer size" msgstr "" #: qemud/remote.c:1303 msgid "maxinfo > REMOTE_VCPUINFO_MAX" msgstr "" #: qemud/remote.c:1309 msgid "maxinfo * maplen > REMOTE_CPUMAPS_MAX" msgstr "" #: qemud/remote.c:1471 msgid "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" msgstr "" #: qemud/remote.c:1580 msgid "cpumap_len > REMOTE_CPUMAP_MAX" msgstr "" #: qemud/remote.c:1885 qemud/remote.c:1948 qemud/remote.c:2907 msgid "maxnames > REMOTE_NETWORK_NAME_LIST_MAX" msgstr "" #: qemud/remote.c:1917 msgid "maxids > REMOTE_DOMAIN_ID_LIST_MAX" msgstr "" #: qemud/remote.c:1981 qemud/remote.c:2041 qemud/remote.c:2065 #: qemud/remote.c:2091 qemud/remote.c:2115 qemud/remote.c:2177 #: qemud/remote.c:2201 #, fuzzy msgid "network not found" msgstr "網路名稱或 uuid" #: qemud/remote.c:2292 src/remote_internal.c:3704 #, fuzzy, c-format msgid "Cannot resolve address %d: %s" msgstr "無法暫停區域 %s" #: qemud/remote.c:2332 msgid "client tried invalid SASL init request" msgstr "" #: qemud/remote.c:2341 src/remote_internal.c:3932 #, fuzzy, c-format msgid "failed to get sock address %d (%s)" msgstr "無法將區域 %s 存至 %s" #: qemud/remote.c:2352 src/remote_internal.c:3944 #, fuzzy, c-format msgid "failed to get peer address %d (%s)" msgstr "無法取得節點資訊" #: qemud/remote.c:2373 #, c-format msgid "sasl context setup failed %d (%s)" msgstr "" #: qemud/remote.c:2387 msgid "cannot TLS get cipher size" msgstr "" #: qemud/remote.c:2397 #, c-format msgid "cannot set SASL external SSF %d (%s)" msgstr "" #: qemud/remote.c:2426 #, c-format msgid "cannot set SASL security props %d (%s)" msgstr "" #: qemud/remote.c:2443 #, c-format msgid "cannot list SASL mechanisms %d (%s)" msgstr "" #: qemud/remote.c:2453 msgid "cannot allocate mechlist" msgstr "" #: qemud/remote.c:2478 src/remote_internal.c:4209 #, c-format msgid "cannot query SASL ssf on connection %d (%s)" msgstr "" #: qemud/remote.c:2488 #, c-format msgid "negotiated SSF %d was not strong enough" msgstr "" #: qemud/remote.c:2518 #, c-format msgid "cannot query SASL username on connection %d (%s)" msgstr "" #: qemud/remote.c:2526 msgid "no client username was found" msgstr "" #: qemud/remote.c:2536 #, fuzzy msgid "out of memory copying username" msgstr "記憶體不足" #: qemud/remote.c:2555 #, c-format msgid "SASL client %s not allowed in whitelist" msgstr "" #: qemud/remote.c:2581 qemud/remote.c:2660 msgid "client tried invalid SASL start request" msgstr "" #: qemud/remote.c:2597 #, c-format msgid "sasl start failed %d (%s)" msgstr "" #: qemud/remote.c:2605 #, c-format msgid "sasl start reply data too long %d" msgstr "" #: qemud/remote.c:2675 #, c-format msgid "sasl step failed %d (%s)" msgstr "" #: qemud/remote.c:2684 #, c-format msgid "sasl step reply data too long %d" msgstr "" #: qemud/remote.c:2733 msgid "client tried unsupported SASL init request" msgstr "" #: qemud/remote.c:2745 msgid "client tried unsupported SASL start request" msgstr "" #: qemud/remote.c:2757 msgid "client tried unsupported SASL step request" msgstr "" #: qemud/remote.c:2787 msgid "client tried invalid PolicyKit init request" msgstr "" #: qemud/remote.c:2793 msgid "cannot get peer socket identity" msgstr "" #: qemud/remote.c:2798 #, c-format msgid "Checking PID %d running as %d" msgstr "" #: qemud/remote.c:2803 #, c-format msgid "Failed to lookup policy kit caller: %s" msgstr "" #: qemud/remote.c:2811 #, fuzzy, c-format msgid "Failed to create polkit action %s\n" msgstr "無法建立非運作中的區域 %s\n" #: qemud/remote.c:2821 #, fuzzy, c-format msgid "Failed to create polkit context %s\n" msgstr "無法建立非運作中的區域 %s\n" #: qemud/remote.c:2841 #, c-format msgid "Policy kit failed to check authorization %d %s" msgstr "" #: qemud/remote.c:2857 #, c-format msgid "Policy kit denied action %s from pid %d, uid %d, result: %s\n" msgstr "" #: qemud/remote.c:2865 #, c-format msgid "Policy allowed action %s from pid %d, uid %d, result %s" msgstr "" #: qemud/remote.c:2884 msgid "client tried unsupported PolicyKit init request" msgstr "" #: qemud/remote.c:2939 msgid "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX" msgstr "" #: qemud/remote.c:2972 qemud/remote.c:3032 qemud/remote.c:3057 #: qemud/remote.c:3081 qemud/remote.c:3105 qemud/remote.c:3130 #: qemud/remote.c:3161 qemud/remote.c:3187 qemud/remote.c:3270 #: qemud/remote.c:3294 qemud/remote.c:3354 qemud/remote.c:3390 #: qemud/remote.c:3421 qemud/remote.c:3557 #, fuzzy msgid "storage_pool not found" msgstr "網路名稱或 uuid" #: qemud/remote.c:3348 msgid "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX" msgstr "" #: qemud/remote.c:3447 qemud/remote.c:3472 qemud/remote.c:3502 #: qemud/remote.c:3529 #, fuzzy msgid "storage_vol not found" msgstr "網路名稱或 uuid" #: src/conf.c:155 src/conf.c:203 src/conf.c:488 src/conf.c:525 src/conf.c:553 #: src/conf.c:631 msgid "allocating configuration" msgstr "分配設定" #: src/conf.c:338 msgid "unterminated number" msgstr "未中止的數量" #: src/conf.c:372 src/conf.c:389 src/conf.c:401 msgid "unterminated string" msgstr "未中止的字串" #: src/conf.c:429 src/conf.c:483 msgid "expecting a value" msgstr "預期的是數值" #: src/conf.c:450 msgid "expecting a separator in list" msgstr "預期的是清單式的分隔子" #: src/conf.c:473 #, fuzzy msgid "list is not closed with ]" msgstr "清單並沒有以 ] 結尾" #: src/conf.c:518 msgid "expecting a name" msgstr "預期的是名稱" #: src/conf.c:581 msgid "expecting a separator" msgstr "預期的是分隔子" #: src/conf.c:613 msgid "expecting an assignment" msgstr "預期的是指定子" #: src/conf.c:894 src/conf.c:950 src/lxc_conf.c:988 src/xend_internal.c:585 #: src/xend_internal.c:2658 src/xm_internal.c:1496 src/xm_internal.c:1503 #, fuzzy msgid "allocate buffer" msgstr "分配新的緩衝區" #: src/conf.c:901 msgid "failed to open file" msgstr "無法開啟檔案" #: src/conf.c:912 msgid "failed to save content" msgstr "無法存入內容" #: src/console.c:75 #, fuzzy, c-format msgid "unable to open tty %s: %s\n" msgstr "無法暫停區域 %s" #: src/console.c:86 #, c-format msgid "unable to get tty attributes: %s\n" msgstr "" #: src/console.c:95 #, c-format msgid "unable to set tty attributes: %s\n" msgstr "" #: src/console.c:130 #, c-format msgid "failure waiting for I/O: %s\n" msgstr "" #: src/console.c:145 #, c-format msgid "failure reading input: %s\n" msgstr "" #: src/console.c:167 #, c-format msgid "failure writing output: %s\n" msgstr "" #: src/domain_conf.c:519 #, fuzzy, c-format msgid "unknown disk type '%s'" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:563 #, fuzzy, c-format msgid "unknown disk device '%s'" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:589 #, fuzzy, c-format msgid "Invalid floppy device name: %s" msgstr "無效的區域指標，於 " #: src/domain_conf.c:603 #, c-format msgid "Invalid harddisk device name: %s" msgstr "" #: src/domain_conf.c:610 #, fuzzy, c-format msgid "unknown disk bus type '%s'" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:633 #, c-format msgid "Invalid bus type '%s' for floppy disk" msgstr "" #: src/domain_conf.c:639 #, fuzzy, c-format msgid "Invalid bus type '%s' for disk" msgstr "無效的參數，於 %s" #: src/domain_conf.c:691 #, fuzzy, c-format msgid "unknown filesystem type '%s'" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:793 #, fuzzy, c-format msgid "unknown interface type '%s'" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:870 src/lxc_conf.c:139 msgid "" "No 'network' attribute specified with " msgstr "" #: src/domain_conf.c:896 msgid "No 'dev' attribute specified with " msgstr "" #: src/domain_conf.c:908 msgid "No 'port' attribute specified with socket interface" msgstr "" #: src/domain_conf.c:913 msgid "Cannot parse 'port' attribute with socket interface" msgstr "" #: src/domain_conf.c:921 msgid "No 'address' attribute specified with socket interface" msgstr "" #: src/domain_conf.c:946 msgid "Model name contains invalid characters" msgstr "" #: src/domain_conf.c:1121 src/domain_conf.c:1198 #, fuzzy msgid "Missing source path attribute for char device" msgstr "找不到裝置的來源資訊" #: src/domain_conf.c:1138 src/domain_conf.c:1155 #, fuzzy msgid "Missing source host attribute for char device" msgstr "找不到裝置的來源資訊" #: src/domain_conf.c:1143 src/domain_conf.c:1160 src/domain_conf.c:1180 #, fuzzy msgid "Missing source service attribute for char device" msgstr "找不到裝置的來源資訊" #: src/domain_conf.c:1250 #, fuzzy msgid "missing input device type" msgstr "找不到 root 裝置的資訊" #: src/domain_conf.c:1256 #, fuzzy, c-format msgid "unknown input device type '%s'" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:1263 #, fuzzy, c-format msgid "unknown input bus type '%s'" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:1271 #, c-format msgid "ps2 bus does not support %s input device" msgstr "" #: src/domain_conf.c:1277 src/domain_conf.c:1284 #, c-format msgid "unsupported input bus %s" msgstr "" #: src/domain_conf.c:1289 #, c-format msgid "xen bus does not support %s input device" msgstr "" #: src/domain_conf.c:1334 #, fuzzy msgid "missing graphics device type" msgstr "找不到 root 裝置的資訊" #: src/domain_conf.c:1340 #, fuzzy, c-format msgid "unknown graphics device type '%s'" msgstr "未知的作業系統類型" #: src/domain_conf.c:1351 #, fuzzy, c-format msgid "cannot parse vnc port %s" msgstr "無法暫停區域 %s" #: src/domain_conf.c:1409 #, fuzzy, c-format msgid "unknown sound model '%s'" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:1442 #, fuzzy, c-format msgid "cannot parse vendor id %s" msgstr "無法暫停區域 %s" #: src/domain_conf.c:1449 msgid "usb vendor needs id" msgstr "" #: src/domain_conf.c:1459 #, fuzzy, c-format msgid "cannot parse product %s" msgstr "無法暫停區域 %s" #: src/domain_conf.c:1466 msgid "usb product needs id" msgstr "" #: src/domain_conf.c:1477 #, fuzzy, c-format msgid "cannot parse bus %s" msgstr "無法暫停區域 %s" #: src/domain_conf.c:1484 msgid "usb address needs bus id" msgstr "" #: src/domain_conf.c:1493 #, fuzzy, c-format msgid "cannot parse device %s" msgstr "無法讀取插槽 %d\n" #: src/domain_conf.c:1501 msgid "usb address needs device id" msgstr "" #: src/domain_conf.c:1506 #, fuzzy, c-format msgid "unknown usb source type '%s'" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:1516 #, fuzzy msgid "missing vendor" msgstr "找不到 \"" #: src/domain_conf.c:1522 #, fuzzy msgid "missing product" msgstr "找不到裝置的來源資訊" #: src/domain_conf.c:1550 #, fuzzy, c-format msgid "unknown hostdev mode '%s'" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:1561 #, fuzzy, c-format msgid "unknown host device type '%s'" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:1566 #, fuzzy msgid "missing type in hostdev" msgstr "找不到裝置的來源資訊" #: src/domain_conf.c:1581 #, fuzzy, c-format msgid "uknown node %s" msgstr "未知的主機 %s" #: src/domain_conf.c:1612 #, fuzzy, c-format msgid "unknown lifecycle action %s" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:1640 src/domain_conf.c:2242 src/domain_conf.c:2283 #: src/network_conf.c:400 src/network_conf.c:440 src/storage_conf.c:424 #: src/storage_conf.c:795 #, fuzzy msgid "missing root element" msgstr "找不到 root 裝置的資訊" #: src/domain_conf.c:1675 #, fuzzy msgid "unknown device type" msgstr "未知的作業系統類型" #: src/domain_conf.c:1701 #, fuzzy msgid "failed to allocate space for xmlXPathContext" msgstr "無法分配節點" #: src/domain_conf.c:1709 src/openvz_conf.c:417 #, fuzzy msgid "missing domain type attribute" msgstr "找不到區域名稱的資訊" #: src/domain_conf.c:1715 #, fuzzy, c-format msgid "invalid domain type %s" msgstr "無效的區域指標，於 " #: src/domain_conf.c:1732 src/network_conf.c:258 src/openvz_conf.c:451 #, fuzzy, c-format msgid "Failed to generate UUID: %s" msgstr "無法讀取插槽 %d\n" #: src/domain_conf.c:1739 src/network_conf.c:265 src/openvz_conf.c:458 #: src/storage_conf.c:267 msgid "malformed uuid element" msgstr "" #: src/domain_conf.c:1748 #, fuzzy msgid "missing memory element" msgstr "找不到 root 裝置的資訊" #: src/domain_conf.c:1778 #, fuzzy, c-format msgid "unexpected feature %s" msgstr "無預期的資料「%s」" #: src/domain_conf.c:1818 #, fuzzy msgid "no OS type" msgstr "未知的作業系統類型" #: src/domain_conf.c:1847 src/xm_internal.c:662 #, fuzzy, c-format msgid "no supported architecture for os type '%s'" msgstr "無預期的 mime 類型" #: src/domain_conf.c:1894 #, fuzzy msgid "cannot extract boot device" msgstr "過多區域" #: src/domain_conf.c:1902 #, fuzzy msgid "missing boot device" msgstr "找不到裝置的來源資訊" #: src/domain_conf.c:1907 #, fuzzy, c-format msgid "unknown boot device '%s'" msgstr "未知的作業系統類型 %s" #: src/domain_conf.c:1927 src/xm_internal.c:793 #, fuzzy msgid "unknown virt type" msgstr "未知的作業系統類型" #: src/domain_conf.c:1945 #, fuzzy msgid "cannot extract disk devices" msgstr "無法解開執行中 %s hypervisor 的版本\n" #: src/domain_conf.c:1975 msgid "cannot extract filesystem devices" msgstr "" #: src/domain_conf.c:1992 src/openvz_conf.c:479 #, fuzzy msgid "cannot extract network devices" msgstr "網路名稱" #: src/domain_conf.c:2010 msgid "cannot extract parallel devices" msgstr "" #: src/domain_conf.c:2027 #, fuzzy msgid "cannot extract serial devices" msgstr "過多區域" #: src/domain_conf.c:2071 #, fuzzy msgid "cannot extract input devices" msgstr "無效的區域指標，於 " #: src/domain_conf.c:2103 #, fuzzy msgid "cannot extract graphics devices" msgstr "無法解開執行中 %s hypervisor 的版本\n" #: src/domain_conf.c:2139 #, fuzzy msgid "cannot extract sound devices" msgstr "無法解開執行中 %s hypervisor 的版本\n" #: src/domain_conf.c:2170 msgid "cannot extract host devices" msgstr "" #: src/domain_conf.c:2206 src/network_conf.c:365 src/storage_conf.c:378 #, fuzzy, c-format msgid "at line %d: %s" msgstr "無法暫停區域 %s" #: src/domain_conf.c:2236 src/domain_conf.c:2277 src/network_conf.c:394 #: src/network_conf.c:434 src/storage_conf.c:410 src/storage_conf.c:781 #, fuzzy msgid "failed to parse xml document" msgstr "無法暫停區域 %s" #: src/domain_conf.c:2306 src/network_conf.c:462 src/openvz_conf.c:404 #, fuzzy msgid "incorrect root element" msgstr "未知的主機 %s" #: src/domain_conf.c:2515 msgid "topology cpuset syntax error" msgstr "" #: src/domain_conf.c:2529 #, fuzzy, c-format msgid "unexpected lifecycle type %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:2550 #, fuzzy, c-format msgid "unexpected disk type %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:2555 #, fuzzy, c-format msgid "unexpected disk device %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:2560 #, fuzzy, c-format msgid "unexpected disk bus %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:2610 #, fuzzy, c-format msgid "unexpected filesystem type %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:2661 src/domain_conf.c:2875 #, fuzzy, c-format msgid "unexpected net type %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:2729 #, fuzzy, c-format msgid "unexpected char type %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:2828 src/xend_internal.c:5214 #, fuzzy, c-format msgid "unexpected sound model %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:2848 src/xend_internal.c:5237 #, fuzzy, c-format msgid "unexpected input type %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:2853 #, fuzzy, c-format msgid "unexpected input bus type %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:2935 #, fuzzy, c-format msgid "unexpected hostdev mode %d" msgstr "無預期的 dict 節點" #: src/domain_conf.c:2942 #, fuzzy, c-format msgid "unexpected hostdev type %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:2987 #, fuzzy, c-format msgid "unexpected domain type %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:3072 #, fuzzy, c-format msgid "unexpected boot device type %d" msgstr "無預期的 mime 類型" #: src/domain_conf.c:3090 #, fuzzy, c-format msgid "unexpected feature %d" msgstr "無預期的數值節點" #: src/domain_conf.c:3252 src/lxc_conf.c:778 src/network_conf.c:583 #: src/storage_conf.c:1138 #, c-format msgid "cannot create config directory %s: %s" msgstr "" #: src/domain_conf.c:3259 src/network_conf.c:590 src/qemu_driver.c:3161 #: src/qemu_driver.c:3789 src/storage_driver.c:792 #, c-format msgid "cannot create autostart directory %s: %s" msgstr "" #: src/domain_conf.c:3268 src/lxc_conf.c:736 src/network_conf.c:599 #: src/storage_conf.c:1181 #, fuzzy, c-format msgid "cannot create config file %s: %s" msgstr "無法寫入設定檔：%s" #: src/domain_conf.c:3276 src/lxc_conf.c:744 src/network_conf.c:607 #: src/storage_conf.c:1189 #, fuzzy, c-format msgid "cannot write config file %s: %s" msgstr "無法寫入設定檔：%s" #: src/domain_conf.c:3283 src/lxc_conf.c:751 src/network_conf.c:614 #: src/storage_conf.c:1196 #, c-format msgid "cannot save config file %s: %s" msgstr "" #: src/domain_conf.c:3332 #, c-format msgid "Domain config filename '%s' does not match domain name '%s'" msgstr "" #: src/domain_conf.c:3368 src/network_conf.c:695 #, fuzzy, c-format msgid "Failed to open dir '%s': %s" msgstr "無法暫停區域 %s" #: src/domain_conf.c:3400 src/lxc_conf.c:1097 src/network_conf.c:726 #: src/storage_conf.c:1217 #, fuzzy, c-format msgid "no config file for %s" msgstr "設定檔語法錯誤：%s" #: src/domain_conf.c:3409 src/network_conf.c:735 #, fuzzy, c-format msgid "cannot remove config for %s: %s" msgstr "無法寫入設定檔：%s" #: src/hash.c:691 src/libvirt.c:742 msgid "allocating connection" msgstr "正在分配連線" #: src/hash.c:825 src/hash.c:830 msgid "allocating domain" msgstr "分配區域" #: src/hash.c:841 msgid "failed to add domain to connection hash table" msgstr "無法為連線雜湊表新增區域" #: src/hash.c:882 msgid "domain missing from connection hash table" msgstr "連線雜湊表中找不到區域" #: src/hash.c:965 src/hash.c:970 msgid "allocating network" msgstr "分配網路" #: src/hash.c:980 msgid "failed to add network to connection hash table" msgstr "無法將網路加入至連線雜湊表" #: src/hash.c:1018 msgid "network missing from connection hash table" msgstr "連線雜湊表中找不到網路" #: src/hash.c:1102 src/hash.c:1107 #, fuzzy msgid "allocating storage pool" msgstr "分配節點" #: src/hash.c:1117 #, fuzzy msgid "failed to add storage pool to connection hash table" msgstr "無法將網路加入至連線雜湊表" #: src/hash.c:1156 #, fuzzy msgid "pool missing from connection hash table" msgstr "連線雜湊表中找不到區域" #: src/hash.c:1233 src/hash.c:1238 src/hash.c:1243 #, fuzzy msgid "allocating storage vol" msgstr "分配節點" #: src/hash.c:1253 #, fuzzy msgid "failed to add storage vol to connection hash table" msgstr "無法將網路加入至連線雜湊表" #: src/hash.c:1293 #, fuzzy msgid "vol missing from connection hash table" msgstr "連線雜湊表中找不到區域" #: src/iptables.c:104 #, fuzzy msgid "Failed to run '" msgstr "無法讀取插槽 %d\n" #: src/iptables.c:152 #, fuzzy msgid "Failed to read " msgstr "無法讀取插槽 %d\n" #: src/iptables.c:180 #, fuzzy msgid "Failed to write to " msgstr "無法寫入插槽 %d\n" #: src/iptables.c:245 #, fuzzy, c-format msgid "Failed to create directory %s : %s" msgstr "無法從 %s 建立網路" #: src/iptables.c:251 #, fuzzy, c-format msgid "Failed to saves iptables rules to %s : %s" msgstr "無法將區域 %s 存至 %s" #: src/iptables.c:581 #, c-format msgid "Failed to remove iptables rule '%s' from chain '%s' in table '%s': %s" msgstr "" #: src/iptables.c:590 #, c-format msgid "Failed to add iptables rule '%s' to chain '%s' in table '%s': %s" msgstr "" #: src/libvirt.c:749 #, fuzzy msgid "could not parse connection URI" msgstr "無法連上 %s" #: src/libvirt.c:767 #, fuzzy msgid "allocating conn->name" msgstr "正在分配連線" #: src/libvirt.c:2189 #, fuzzy msgid "domainMigratePrepare did not set uri" msgstr "區域的資訊不正確，domid 並非數字型態" #: src/libvirt.c:2657 msgid "path is NULL" msgstr "" #: src/libvirt.c:2663 msgid "flags must be zero" msgstr "" #: src/libvirt.c:2670 msgid "buffer is NULL" msgstr "" #: src/libvirt.c:2753 msgid "flags parameter must be VIR_MEMORY_VIRTUAL" msgstr "" #: src/libvirt.c:2760 msgid "buffer is NULL but size is non-zero" msgstr "" #: src/lxc_conf.c:108 #, fuzzy, c-format msgid "invalid interface type: %s" msgstr "無效的參數，於 %s" #: src/lxc_conf.c:146 #, fuzzy msgid "No storage for network name" msgstr "網路名稱" #: src/lxc_conf.c:153 msgid "" "No 'bridge' attribute specified with " msgstr "" #: src/lxc_conf.c:160 #, fuzzy msgid "No storage for bridge name" msgstr "區域目前的記憶體" #: src/lxc_conf.c:170 msgid "No storage for parent veth device name" msgstr "" #: src/lxc_conf.c:219 msgid "No storage for net def structure" msgstr "" #: src/lxc_conf.c:268 msgid "missing filesystem type" msgstr "" #: src/lxc_conf.c:274 msgid "invalid filesystem type" msgstr "" #: src/lxc_conf.c:296 #, fuzzy msgid "missing mount source" msgstr "找不到裝置的來源資訊" #: src/lxc_conf.c:303 msgid "empty or invalid mount source" msgstr "" #: src/lxc_conf.c:312 #, fuzzy msgid "missing mount target" msgstr "找不到裝置的目標資訊" #: src/lxc_conf.c:319 msgid "empty or invalid mount target" msgstr "" #: src/lxc_conf.c:360 #, fuzzy msgid "failed to generate uuid" msgstr "網路名稱或 uuid" #: src/lxc_conf.c:366 #, fuzzy msgid "invalid uuid element" msgstr "無效的參數，於 " #: src/lxc_conf.c:428 #, fuzzy msgid "invalid or missing init element" msgstr "找不到 root 裝置的資訊" #: src/lxc_conf.c:434 msgid "init string too long" msgstr "" #: src/lxc_conf.c:473 #, fuzzy msgid "invalid memory value" msgstr "記憶體大小 %d 不是有效的數值" #: src/lxc_conf.c:500 #, fuzzy msgid "invalid root element" msgstr "找不到 root 裝置的資訊" #: src/lxc_conf.c:513 #, fuzzy msgid "missing domain type" msgstr "找不到區域名稱的資訊" #: src/lxc_conf.c:519 #, fuzzy msgid "invalid domain type" msgstr "無效的區域指標，於 " #: src/lxc_conf.c:527 #, fuzzy msgid "invalid domain id" msgstr "無效的區域指標，於 " #: src/lxc_conf.c:623 #, c-format msgid "Can't redefine active VM with name %s" msgstr "" #: src/lxc_conf.c:676 #, c-format msgid "error checking container process: %d %s" msgstr "" #: src/lxc_conf.c:786 src/storage_conf.c:1146 msgid "cannot construct config file path" msgstr "" #: src/lxc_conf.c:895 #, fuzzy, c-format msgid "failed to open config directory %s: %s" msgstr "無法從 %s 建立網路" #: src/lxc_conf.c:1103 src/storage_conf.c:1223 #, c-format msgid "cannot remove config for %s" msgstr "" #: src/lxc_conf.c:1129 src/lxc_conf.c:1207 #, fuzzy, c-format msgid "cannot create lxc state directory %s: %s" msgstr "無法寫入設定檔：%s" #: src/lxc_conf.c:1137 src/lxc_conf.c:1215 msgid "cannot construct tty pid file path" msgstr "" #: src/lxc_conf.c:1146 #, fuzzy, c-format msgid "cannot create tty pid file %s: %s" msgstr "無法寫入設定檔：%s" #: src/lxc_conf.c:1153 #, fuzzy, c-format msgid "cannot fdopen tty pid file %s: %s" msgstr "無法暫停區域 %s" #: src/lxc_conf.c:1158 src/lxc_conf.c:1178 src/lxc_conf.c:1241 #, fuzzy, c-format msgid "failed to close tty pid file %s: %s" msgstr "無法暫停區域 %s" #: src/lxc_conf.c:1167 #, fuzzy, c-format msgid "cannot write tty pid file %s: %s" msgstr "無法寫入設定檔：%s" #: src/lxc_conf.c:1227 #, fuzzy, c-format msgid "cannot open tty pid file %s: %s" msgstr "無法暫停區域 %s" #: src/lxc_conf.c:1234 #, fuzzy, c-format msgid "cannot read tty pid file %s: %s" msgstr "無法寫入設定檔：%s" #: src/lxc_conf.c:1273 #, fuzzy, c-format msgid "cannot remove ttyPidFile %s: %s" msgstr "無法寫入設定檔：%s" #: src/lxc_container.c:61 #, fuzzy, c-format msgid "failed to calloc memory for init string: %s" msgstr "無法分配節點" #: src/lxc_container.c:71 #, fuzzy, c-format msgid "execl failed to exec init: %s" msgstr "無法執行 %s\n" #: src/lxc_container.c:93 #, fuzzy, c-format msgid "setsid failed: %s" msgstr "操作失敗：%s" #: src/lxc_container.c:100 #, fuzzy, c-format msgid "open(%s) failed: %s" msgstr "操作失敗：%s" #: src/lxc_container.c:106 #, fuzzy, c-format msgid "ioctl(TIOCSTTY) failed: %s" msgstr "分配數值陣列" #: src/lxc_container.c:114 #, fuzzy, c-format msgid "dup2(stdin) failed: %s" msgstr "操作失敗：%s" #: src/lxc_container.c:120 #, fuzzy, c-format msgid "dup2(stdout) failed: %s" msgstr "操作失敗：%s" #: src/lxc_container.c:126 #, fuzzy, c-format msgid "dup2(stderr) failed: %s" msgstr "操作失敗：%s" #: src/lxc_container.c:181 #, fuzzy, c-format msgid "Failed to read the container continue message: %s" msgstr "無法建立非運作中的區域 %s\n" #: src/lxc_container.c:250 msgid "lxcChild() passed invalid vm definition" msgstr "" #: src/lxc_container.c:265 #, fuzzy, c-format msgid "failed to mount %s at %s for container: %s" msgstr "無法開啟區域 %s" #: src/lxc_container.c:275 #, fuzzy, c-format msgid "failed to mount /proc for container: %s" msgstr "無法開啟區域 %s" #: src/lxc_driver.c:299 src/lxc_driver.c:425 msgid "System lacks NETNS support" msgstr "" #: src/lxc_driver.c:329 src/lxc_driver.c:360 src/lxc_driver.c:393 #: src/openvz_driver.c:249 src/openvz_driver.c:598 src/openvz_driver.c:628 #: src/openvz_driver.c:649 src/qemu_driver.c:2156 src/qemu_driver.c:2243 #: src/qemu_driver.c:2792 src/qemu_driver.c:2847 src/qemu_driver.c:2891 #: src/qemu_driver.c:2963 src/qemu_driver.c:2996 src/qemu_driver.c:3038 #: src/qemu_driver.c:3088 src/qemu_driver.c:3131 src/qemu_driver.c:3147 #: src/qemu_driver.c:3389 #, fuzzy msgid "no domain with matching uuid" msgstr "區域 id 或 uuid" #: src/lxc_driver.c:335 src/openvz_driver.c:603 src/qemu_driver.c:2897 #, fuzzy msgid "cannot delete active domain" msgstr "非作用中區域的名稱" #: src/lxc_driver.c:447 #, fuzzy msgid "failed to get bridge for interface" msgstr "無法取得節點資訊" #: src/lxc_driver.c:461 #, fuzzy, c-format msgid "failed to create veth device pair: %d" msgstr "無法從 %s 建立區域" #: src/lxc_driver.c:473 #, fuzzy msgid "failed to allocate veth names" msgstr "無法分配節點" #: src/lxc_driver.c:479 src/qemu_conf.c:590 src/qemu_driver.c:1471 #, fuzzy, c-format msgid "cannot initialize bridge support: %s" msgstr "無法暫停區域 %s" #: src/lxc_driver.c:486 #, fuzzy, c-format msgid "failed to add %s device to %s: %s" msgstr "無法暫停區域 %s" #: src/lxc_driver.c:495 #, fuzzy, c-format msgid "failed to enable parent ns veth device: %d" msgstr "無法分配節點" #: src/lxc_driver.c:525 #, fuzzy, c-format msgid "failed to move interface %s to ns %d" msgstr "無法取得節點資訊" #: src/lxc_driver.c:554 #, fuzzy, c-format msgid "failed to delete veth: %s" msgstr "無法刪除區域 %s" #: src/lxc_driver.c:585 #, fuzzy, c-format msgid "unable to send container continue message: %s" msgstr "無法分配節點" #: src/lxc_driver.c:618 #, fuzzy msgid "unable to allocate container stack" msgstr "無法分配節點" #: src/lxc_driver.c:634 #, fuzzy, c-format msgid "clone() failed, %s" msgstr "分配數值陣列" #: src/lxc_driver.c:732 #, fuzzy msgid "unable to get storage for vm tty name" msgstr "區域目前的記憶體" #: src/lxc_driver.c:776 #, fuzzy, c-format msgid "posix_openpt failed: %s" msgstr "操作失敗：%s" #: src/lxc_driver.c:782 #, fuzzy, c-format msgid "unlockpt failed: %s" msgstr "操作失敗：%s" #: src/lxc_driver.c:788 #, fuzzy, c-format msgid "ptsname_r failed: %s" msgstr "操作失敗：%s" #: src/lxc_driver.c:794 #, fuzzy msgid "unable to allocate container name string" msgstr "無法分配節點" #: src/lxc_driver.c:833 #, fuzzy, c-format msgid "read of fd %d failed: %s" msgstr "操作失敗：%s" #: src/lxc_driver.c:839 #, fuzzy, c-format msgid "write to fd %d failed: %s" msgstr "無法暫停區域 %s" #: src/lxc_driver.c:887 #, fuzzy, c-format msgid "epoll_create(2) failed: %s" msgstr "操作失敗：%s" #: src/lxc_driver.c:898 #, fuzzy, c-format msgid "epoll_ctl(fd1) failed: %s" msgstr "操作失敗：%s" #: src/lxc_driver.c:905 #, fuzzy, c-format msgid "epoll_ctl(fd2) failed: %s" msgstr "操作失敗：%s" #: src/lxc_driver.c:926 #, c-format msgid "error event %d" msgstr "" #: src/lxc_driver.c:947 #, fuzzy, c-format msgid "epoll_wait() failed: %s" msgstr "操作失敗：%s" #: src/lxc_driver.c:1007 #, fuzzy, c-format msgid "unable to fork tty forwarding process: %s" msgstr "無法開啟要讀取的 %s" #: src/lxc_driver.c:1032 #, fuzzy, c-format msgid "sockpair failed: %s" msgstr "操作失敗：%s" #: src/lxc_driver.c:1153 src/lxc_driver.c:1263 #, fuzzy, c-format msgid "no domain with id %d" msgstr "區域 id 或 uuid" #: src/lxc_driver.c:1160 #, fuzzy, c-format msgid "sending SIGTERM failed: %s" msgstr "操作失敗：%s" #: src/lxc_driver.c:1198 #, fuzzy, c-format msgid "waitpid failed to wait for container %d: %d %s" msgstr "無法開啟區域 %s" #: src/lxc_driver.c:1219 #, fuzzy, c-format msgid "sending SIGKILL to tty process failed: %s" msgstr "操作失敗：%s" #: src/lxc_driver.c:1231 #, fuzzy, c-format msgid "waitpid failed to wait for tty %d: %d %s" msgstr "無法開啟區域 %s" #: src/lxc_driver.c:1270 #, fuzzy, c-format msgid "sending SIGKILL failed: %s" msgstr "操作失敗：%s" #: src/network_conf.c:291 #, fuzzy, c-format msgid "cannot parse IP address '%s'" msgstr "無法暫停區域 %s" #: src/network_conf.c:297 #, fuzzy, c-format msgid "cannot parse netmask '%s'" msgstr "無法暫停區域 %s" #: src/network_conf.c:321 msgid "Forwarding requested, but no IPv4 address/netmask provided" msgstr "" #: src/network_conf.c:329 #, fuzzy, c-format msgid "unknown forwarding type '%s'" msgstr "未知的作業系統類型 %s" #: src/network_conf.c:661 #, c-format msgid "Network config filename '%s' does not match network name '%s'" msgstr "" #: src/openvz_conf.c:249 #, c-format msgid "Error already an active OPENVZ VM having id '%s'" msgstr "" #: src/openvz_conf.c:260 msgid "vm" msgstr "" #: src/openvz_conf.c:316 #, fuzzy msgid "missing filesystem tag" msgstr "找不到裝置的目標資訊" #: src/openvz_conf.c:322 msgid "There should be only one filesystem tag" msgstr "" #: src/openvz_conf.c:332 #, fuzzy msgid "missing type attribute" msgstr "找不到區域名稱的資訊" #: src/openvz_conf.c:338 #, fuzzy, c-format msgid "Unknown type attribute %s" msgstr "找不到區域名稱的資訊" #: src/openvz_conf.c:397 src/openvz_conf.c:410 src/storage_conf.c:417 #: src/storage_conf.c:788 msgid "xmlXPathContext" msgstr "" #: src/openvz_conf.c:422 #, fuzzy msgid "invalid domain type attribute" msgstr "無效的區域指標，於 " #: src/openvz_conf.c:431 #, fuzzy msgid "invalid domain name" msgstr "無效的區域指標，於 " #: src/openvz_conf.c:438 msgid "VPS ID Error (must be an integer greater than 100" msgstr "" #: src/openvz_conf.c:471 msgid "malformed filesystem tag" msgstr "" #: src/openvz_conf.c:523 #, fuzzy msgid "popen failed" msgstr "操作失敗" #: src/openvz_conf.c:529 src/openvz_conf.c:557 #, fuzzy msgid "calloc failed" msgstr "分配數值陣列" #: src/openvz_conf.c:538 #, fuzzy msgid "Failed to parse vzlist output" msgstr "無法暫停區域 %s" #: src/openvz_conf.c:567 #, fuzzy msgid "UUID in config file malformed" msgstr "設定檔語法錯誤：%s" #: src/openvz_driver.c:125 #, fuzzy msgid "Container is not defined" msgstr "區域還在執行中" #: src/openvz_driver.c:163 src/openvz_driver.c:415 #, fuzzy, c-format msgid "Could not put argument to %s" msgstr "無法連上 %s" #: src/openvz_driver.c:185 src/openvz_driver.c:213 src/openvz_driver.c:234 msgid "virDomainPtr" msgstr "" #: src/openvz_driver.c:260 #, fuzzy, c-format msgid "cannot read cputime for domain %d" msgstr "非作用中區域的名稱" #: src/openvz_driver.c:280 src/openvz_driver.c:312 src/openvz_driver.c:565 msgid "no domain with matching id" msgstr "" #: src/openvz_driver.c:286 src/openvz_driver.c:318 #, fuzzy msgid "domain is not in running state" msgstr "區域還在執行中" #: src/openvz_driver.c:292 src/openvz_driver.c:324 src/openvz_driver.c:396 #: src/openvz_driver.c:458 src/openvz_driver.c:519 src/openvz_driver.c:539 #: src/openvz_driver.c:577 src/openvz_driver.c:609 src/openvz_driver.c:633 #: src/openvz_driver.c:748 src/openvz_driver.c:785 #, fuzzy, c-format msgid "Could not exec %s" msgstr "無法連上 %s" #: src/openvz_driver.c:352 msgid "Container ID is not specified" msgstr "" #: src/openvz_driver.c:438 #, c-format msgid "Already an OPENVZ VM active with the id '%s'" msgstr "" #: src/openvz_driver.c:444 src/openvz_driver.c:507 msgid "Error creating OPENVZ VM" msgstr "" #: src/openvz_driver.c:449 src/openvz_driver.c:513 msgid "Error creating command for container" msgstr "" #: src/openvz_driver.c:464 src/openvz_driver.c:525 #, fuzzy msgid "Could not set UUID" msgstr "無法連上 %s" #: src/openvz_driver.c:474 src/openvz_driver.c:531 #, fuzzy msgid "Could not configure network" msgstr "無法連上 %s" #: src/openvz_driver.c:502 #, c-format msgid "Already an OPENVZ VM defined with the id '%d'" msgstr "" #: src/openvz_driver.c:571 #, fuzzy msgid "domain is not in shutoff state" msgstr "區域還在執行中" #: src/openvz_driver.c:654 #, fuzzy msgid "Cound not read container config" msgstr "無法連上 %s" #: src/openvz_driver.c:757 src/openvz_driver.c:794 #, fuzzy, c-format msgid "Could not parse VPS ID %s" msgstr "無法連上 %s" #: src/proxy_internal.c:188 #, c-format msgid "failed to exec %s\n" msgstr "無法執行 %s\n" #: src/proxy_internal.c:282 #, c-format msgid "Failed to close socket %d\n" msgstr "無法關閉插槽 %d\n" #: src/proxy_internal.c:315 #, c-format msgid "Failed to read socket %d\n" msgstr "無法讀取插槽 %d\n" #: src/proxy_internal.c:342 #, c-format msgid "Failed to write to socket %d\n" msgstr "無法寫入插槽 %d\n" #: src/proxy_internal.c:434 src/proxy_internal.c:455 src/proxy_internal.c:475 #, c-format msgid "Communication error with proxy: got %d bytes of %d\n" msgstr "使用代理伺服器時通訊錯誤：取得 %d 的位元組（自 %d 處）\n" #: src/proxy_internal.c:442 #, c-format msgid "Communication error with proxy: expected %d bytes got %d\n" msgstr "使用代理伺服器時通訊錯誤：預期 %d 個位元組取得 %d\n" #: src/proxy_internal.c:464 #, c-format msgid "Communication error with proxy: got %d bytes packet\n" msgstr "使用代理伺服器時通訊錯誤：取得 %d 位元組的封包\n" #: src/proxy_internal.c:488 msgid "Communication error with proxy: malformed packet\n" msgstr "使用代理伺服器時通訊錯誤：封包格式錯誤\n" #: src/proxy_internal.c:494 #, c-format msgid "got asynchronous packet number %d\n" msgstr "取得非同步的封包號碼 %d\n" #: src/qemu_conf.c:93 #, fuzzy msgid "failed to allocate vncListen" msgstr "無法分配節點" #: src/qemu_conf.c:98 src/qemu_conf.c:133 src/qemu_conf.c:144 #, fuzzy msgid "failed to allocate vncTLSx509certdir" msgstr "無法分配節點" #: src/qemu_conf.c:495 #, c-format msgid "Unexpected exit status from qemu %d pid %lu" msgstr "" #: src/qemu_conf.c:504 #, c-format msgid "Unexpected exit status '%d', qemu probably failed" msgstr "" #: src/qemu_conf.c:529 src/qemu_driver.c:915 #, fuzzy, c-format msgid "Cannot find QEMU binary %s: %s" msgstr "無法暫停區域 %s" #: src/qemu_conf.c:560 #, fuzzy, c-format msgid "Network '%s' not found" msgstr "網路名稱或 uuid" #: src/qemu_conf.c:565 #, fuzzy, c-format msgid "Network '%s' not active" msgstr "網路 %s 已開啟\n" #: src/qemu_conf.c:574 #, fuzzy, c-format msgid "Network type %d is not supported" msgstr "網路 %s 已開啟\n" #: src/qemu_conf.c:600 #, fuzzy, c-format msgid "Failed to add tap interface to bridge. %s is not a bridge device" msgstr "無法暫停區域 %s" #: src/qemu_conf.c:604 #, fuzzy, c-format msgid "Failed to add tap interface '%s' to bridge '%s' : %s" msgstr "無法暫停區域 %s" #: src/qemu_conf.c:627 #, fuzzy msgid "failed to allocate space for tapfds string" msgstr "無法分配節點" #: src/qemu_conf.c:902 src/qemu_conf.c:953 #, fuzzy, c-format msgid "unsupported usb disk type for '%s'" msgstr "無預期的 mime 類型" #: src/qemu_conf.c:911 src/qemu_conf.c:974 #, fuzzy, c-format msgid "unsupported disk type '%s'" msgstr "無預期的 mime 類型" #: src/qemu_conf.c:1178 #, fuzzy msgid "invalid sound model" msgstr "無效的區域指標，於 " #: src/qemu_conf.c:1231 #, fuzzy msgid "failed to allocate space for argv string" msgstr "無法分配節點" #: src/qemu_driver.c:91 #, fuzzy msgid "Failed to set close-on-exec file descriptor flag\n" msgstr "無法寫入設定檔" #: src/qemu_driver.c:106 #, fuzzy msgid "Failed to set non-blocking file descriptor flag\n" msgstr "無法解析 Xend 的區域資訊" #: src/qemu_driver.c:151 #, fuzzy, c-format msgid "Failed to autostart network '%s': %s\n" msgstr "無法開啟網路 %s" #: src/qemu_driver.c:166 #, fuzzy, c-format msgid "Failed to autostart VM '%s': %s\n" msgstr "無法暫停區域 %s" #: src/qemu_driver.c:202 #, fuzzy, c-format msgid "Failed to find user record for uid '%d': %s\n" msgstr "無法為網路 %s 取消定義" #: src/qemu_driver.c:213 #, fuzzy msgid "out of memory in asprintf\n" msgstr "記憶體不足" #: src/qemu_driver.c:269 #, fuzzy msgid "qemudStartup: out of memory\n" msgstr "記憶體不足" #: src/qemu_driver.c:296 msgid "Reloading iptables rules\n" msgstr "" #: src/qemu_driver.c:433 #, c-format msgid "" "QEMU quit during %s startup\n" "%s" msgstr "" #: src/qemu_driver.c:443 src/qemu_driver.c:456 #, c-format msgid "Failure while reading %s startup output: %s" msgstr "" #: src/qemu_driver.c:451 #, c-format msgid "Timed out while reading %s startup output" msgstr "" #: src/qemu_driver.c:467 #, c-format msgid "Failure while reading %s startup output" msgstr "" #: src/qemu_driver.c:479 #, c-format msgid "Out of space while reading %s startup output" msgstr "" #: src/qemu_driver.c:510 #, fuzzy, c-format msgid "Unable to open monitor path %s" msgstr "無法暫停區域 %s" #: src/qemu_driver.c:515 msgid "Unable to set monitor close-on-exec flag" msgstr "" #: src/qemu_driver.c:520 msgid "Unable to put monitor into non-blocking mode" msgstr "" #: src/qemu_driver.c:648 src/qemu_driver.c:1010 src/qemu_driver.c:1690 #: src/qemu_driver.c:1700 #, fuzzy, c-format msgid "Unable to log VM console data: %s\n" msgstr "無法寫入設定檔" #: src/qemu_driver.c:671 #, fuzzy msgid "allocate cpumap" msgstr "分配新的內文" #: src/qemu_driver.c:682 msgid "cannot run monitor command to fetch CPU thread info" msgstr "" #: src/qemu_driver.c:786 #, fuzzy, c-format msgid "failed to set CPU affinity %s" msgstr "無法取得區域「%s」" #: src/qemu_driver.c:796 src/qemu_driver.c:2099 #, fuzzy msgid "resume operation failed" msgstr "操作失敗" #: src/qemu_driver.c:855 #, fuzzy msgid "VM is already active" msgstr "區域已經啟動" #: src/qemu_driver.c:865 msgid "Unable to find an unused VNC port" msgstr "" #: src/qemu_driver.c:877 #, c-format msgid "config file path too long: %s/%s.log" msgstr "" #: src/qemu_driver.c:888 #, fuzzy, c-format msgid "cannot create log directory %s: %s" msgstr "無法寫入設定檔：%s" #: src/qemu_driver.c:896 #, fuzzy, c-format msgid "failed to create logfile %s: %s" msgstr "無法寫入設定檔" #: src/qemu_driver.c:902 #, fuzzy, c-format msgid "Unable to set VM logfile close-on-exec flag %s" msgstr "無法寫入設定檔" #: src/qemu_driver.c:925 #, fuzzy, c-format msgid "Cannot determine QEMU argv syntax %s" msgstr "無法暫停區域 %s" #: src/qemu_driver.c:941 src/qemu_driver.c:944 src/qemu_driver.c:949 #, fuzzy, c-format msgid "Unable to write argv to logfile %d: %s\n" msgstr "無法寫入設定檔" #: src/qemu_driver.c:1024 #, fuzzy, c-format msgid "Shutting down VM '%s'\n" msgstr "無法取得網路「%s」" #: src/qemu_driver.c:1035 #, fuzzy, c-format msgid "Unable to close logfile %d: %s\n" msgstr "無法寫入設定檔" #: src/qemu_driver.c:1050 #, fuzzy msgid "Got unexpected pid, damn\n" msgstr "無預期的 dict 節點" #: src/qemu_driver.c:1178 #, fuzzy msgid "failed to allocate space for dnsmasq argv" msgstr "無法分配節點" #: src/qemu_driver.c:1192 msgid "cannot start dhcp daemon without IP address for server" msgstr "" #: src/qemu_driver.c:1220 #, fuzzy, c-format msgid "failed to add iptables rule to allow forwarding from '%s' : %s\n" msgstr "無法將區域 %s 存至 %s" #: src/qemu_driver.c:1231 #, fuzzy, c-format msgid "failed to add iptables rule to allow forwarding to '%s' : %s\n" msgstr "無法將區域 %s 存至 %s" #: src/qemu_driver.c:1241 #, fuzzy, c-format msgid "failed to add iptables rule to enable masquerading : %s\n" msgstr "無法將區域 %s 存至 %s" #: src/qemu_driver.c:1273 #, fuzzy, c-format msgid "failed to add iptables rule to allow routing from '%s' : %s\n" msgstr "無法將區域 %s 存至 %s" #: src/qemu_driver.c:1284 #, fuzzy, c-format msgid "failed to add iptables rule to allow routing to '%s' : %s\n" msgstr "無法將區域 %s 存至 %s" #: src/qemu_driver.c:1309 #, fuzzy msgid "failed to allocate space for IP tables support" msgstr "無法分配節點" #: src/qemu_driver.c:1317 src/qemu_driver.c:1324 #, fuzzy, c-format msgid "failed to add iptables rule to allow DHCP requests from '%s' : %s" msgstr "無法將區域 %s 存至 %s" #: src/qemu_driver.c:1332 src/qemu_driver.c:1339 #, fuzzy, c-format msgid "failed to add iptables rule to allow DNS requests from '%s' : %s" msgstr "無法將區域 %s 存至 %s" #: src/qemu_driver.c:1349 #, fuzzy, c-format msgid "failed to add iptables rule to block outbound traffic from '%s' : %s" msgstr "無法將區域 %s 存至 %s" #: src/qemu_driver.c:1356 #, fuzzy, c-format msgid "failed to add iptables rule to block inbound traffic to '%s' : %s" msgstr "無法將區域 %s 存至 %s" #: src/qemu_driver.c:1364 #, fuzzy, c-format msgid "failed to add iptables rule to allow cross bridge traffic on '%s' : %s" msgstr "無法將區域 %s 存至 %s" #: src/qemu_driver.c:1465 #, fuzzy msgid "network is already active" msgstr "區域已經啟動" #: src/qemu_driver.c:1477 #, fuzzy, c-format msgid "cannot create bridge '%s' : %s" msgstr "無法寫入設定檔：%s" #: src/qemu_driver.c:1485 #, fuzzy, c-format msgid "failed to set bridge forward delay to %ld" msgstr "無法取得節點資訊" #: src/qemu_driver.c:1492 #, fuzzy, c-format msgid "failed to set bridge STP to %s" msgstr "無法暫停區域 %s" #: src/qemu_driver.c:1500 #, fuzzy, c-format msgid "cannot set IP address on bridge '%s' to '%s' : %s" msgstr "無法暫停區域 %s" #: src/qemu_driver.c:1508 #, fuzzy, c-format msgid "cannot set netmask on bridge '%s' to '%s' : %s" msgstr "無法暫停區域 %s" #: src/qemu_driver.c:1516 #, fuzzy, c-format msgid "failed to bring the bridge '%s' up : %s" msgstr "無法暫停區域 %s" #: src/qemu_driver.c:1527 #, fuzzy, c-format msgid "failed to enable IP forwarding : %s" msgstr "無法開啟要讀取的 %s" #: src/qemu_driver.c:1545 src/qemu_driver.c:1576 #, fuzzy, c-format msgid "Failed to bring down bridge '%s' : %s\n" msgstr "無法暫停區域 %s" #: src/qemu_driver.c:1551 src/qemu_driver.c:1581 #, fuzzy, c-format msgid "Failed to delete bridge '%s' : %s\n" msgstr "無法暫停區域 %s" #: src/qemu_driver.c:1564 #, fuzzy, c-format msgid "Shutting down network '%s'\n" msgstr "無法取得網路「%s」" #: src/qemu_driver.c:1590 #, fuzzy msgid "Got unexpected pid for dnsmasq\n" msgstr "無預期的 dict 節點" #: src/qemu_driver.c:1787 #, fuzzy, c-format msgid "unknown type '%s'" msgstr "未知的作業系統類型 %s" #: src/qemu_driver.c:1803 #, fuzzy msgid "failed to allocate space for capabilities support" msgstr "無法分配節點" #: src/qemu_driver.c:1822 src/qemu_driver.c:1848 msgid "NUMA not supported on this host" msgstr "" #: src/qemu_driver.c:1833 src/qemu_driver.c:1856 #, fuzzy msgid "Failed to query NUMA free memory" msgstr "已使用的記憶體：" #: src/qemu_driver.c:2017 #, fuzzy, c-format msgid "domain '%s' is already defined" msgstr "區域 %s 已經存在" #: src/qemu_driver.c:2028 #, fuzzy, c-format msgid "domain with uuid '%s' is already defined" msgstr "區域 %s 已經存在" #: src/qemu_driver.c:2058 src/qemu_driver.c:2087 src/qemu_driver.c:2116 #: src/qemu_driver.c:2136 src/qemu_driver.c:2374 src/qemu_driver.c:3205 #: src/qemu_driver.c:3340 src/qemu_driver.c:3454 #, c-format msgid "no domain with matching id %d" msgstr "" #: src/qemu_driver.c:2063 src/qemu_driver.c:2092 src/qemu_driver.c:2380 #: src/qemu_driver.c:3210 src/qemu_driver.c:3346 src/qemu_driver.c:3460 #, fuzzy msgid "domain is not running" msgstr "區域還在執行中" #: src/qemu_driver.c:2071 #, fuzzy msgid "suspend operation failed" msgstr "操作失敗" #: src/qemu_driver.c:2122 #, fuzzy msgid "shutdown operation failed" msgstr "操作失敗" #: src/qemu_driver.c:2162 #, fuzzy msgid "failed to allocate space for ostype" msgstr "無法分配節點" #: src/qemu_driver.c:2178 src/qemu_driver.c:2194 src/qemu_driver.c:2217 #: src/qemu_driver.c:2490 src/qemu_driver.c:2652 #, c-format msgid "no domain with matching uuid '%s'" msgstr "" #: src/qemu_driver.c:2200 msgid "cannot set max memory lower than current memory" msgstr "" #: src/qemu_driver.c:2223 #, fuzzy msgid "cannot set memory of an active domain" msgstr "非作用中區域的名稱" #: src/qemu_driver.c:2229 msgid "cannot set memory higher than max memory" msgstr "" #: src/qemu_driver.c:2389 #, fuzzy msgid "failed to pause domain" msgstr "無法暫停區域 %s" #: src/qemu_driver.c:2398 #, fuzzy msgid "failed to get domain xml" msgstr "無法取得區域 UUID" #: src/qemu_driver.c:2406 #, fuzzy, c-format msgid "failed to create '%s'" msgstr "無法讀取插槽 %d\n" #: src/qemu_driver.c:2413 #, fuzzy msgid "failed to write save header" msgstr "無法寫入插槽 %d\n" #: src/qemu_driver.c:2421 #, fuzzy msgid "failed to write xml" msgstr "無法寫入插槽 %d\n" #: src/qemu_driver.c:2434 src/qemu_driver.c:2441 src/qemu_driver.c:2712 #: src/qemu_driver.c:2921 src/qemu_driver.c:2929 src/qemu_driver.c:2937 #: src/remote_internal.c:2281 src/virterror.c:441 msgid "out of memory" msgstr "記憶體不足" #: src/qemu_driver.c:2449 #, fuzzy msgid "migrate operation failed" msgstr "操作失敗" #: src/qemu_driver.c:2461 msgid "'migrate' not supported by this qemu" msgstr "" #: src/qemu_driver.c:2496 #, fuzzy msgid "cannot change vcpu count of an active domain" msgstr "非作用中區域的名稱" #: src/qemu_driver.c:2502 msgid "could not determine max vcpus for the domain" msgstr "" #: src/qemu_driver.c:2508 #, c-format msgid "" "requested vcpus is greater than max allowable vcpus for the domain: %d > %d" msgstr "" #: src/qemu_driver.c:2532 src/qemu_driver.c:2584 #, fuzzy msgid "cannot pin vcpus on an inactive domain" msgstr "取消定義非作用中的區域" #: src/qemu_driver.c:2538 #, c-format msgid "vcpu number out of range %d > %d" msgstr "" #: src/qemu_driver.c:2559 #, fuzzy, c-format msgid "cannot set affinity: %s" msgstr "無法暫停區域 %s" #: src/qemu_driver.c:2564 #, fuzzy msgid "cpu affinity is not supported" msgstr "呼叫函式庫失敗，可能並不支援" #: src/qemu_driver.c:2621 #, fuzzy, c-format msgid "cannot get affinity: %s" msgstr "無法讀取插槽 %d\n" #: src/qemu_driver.c:2631 msgid "cpu affinity is not available" msgstr "" #: src/qemu_driver.c:2658 #, fuzzy, c-format msgid "unknown virt type in domain definition '%d'" msgstr "載入區域定義檔" #: src/qemu_driver.c:2684 src/test.c:960 #, fuzzy msgid "cannot read domain image" msgstr "節點的區域清單" #: src/qemu_driver.c:2690 #, fuzzy msgid "failed to read qemu header" msgstr "無法從 Xen 系統程式讀取" #: src/qemu_driver.c:2697 msgid "image magic is incorrect" msgstr "" #: src/qemu_driver.c:2704 #, c-format msgid "image version is not supported (%d > %d)" msgstr "" #: src/qemu_driver.c:2719 #, fuzzy msgid "failed to read XML" msgstr "無法讀取插槽 %d\n" #: src/qemu_driver.c:2728 #, fuzzy msgid "failed to parse XML" msgstr "無法讀取插槽 %d\n" #: src/qemu_driver.c:2741 #, fuzzy, c-format msgid "domain is already active as '%s'" msgstr "區域已經啟動" #: src/qemu_driver.c:2750 #, fuzzy msgid "failed to assign new VM" msgstr "無法讀取插槽 %d\n" #: src/qemu_driver.c:2763 #, fuzzy msgid "failed to start VM" msgstr "無法開啟區域 %s" #: src/qemu_driver.c:2775 #, fuzzy msgid "failed to resume domain" msgstr "無法繼續區域 %s" #: src/qemu_driver.c:2812 src/qemu_driver.c:3563 src/qemu_driver.c:3598 #, fuzzy msgid "failed to allocate space for VM name string" msgstr "無法分配節點" #: src/qemu_driver.c:2943 msgid "cannot change cdrom media" msgstr "" #: src/qemu_driver.c:2977 msgid "CDROM not attached, cannot change media" msgstr "" #: src/qemu_driver.c:3008 src/qemu_driver.c:3058 #, fuzzy msgid "cannot attach usb device" msgstr "取消定義非作用中的區域" #: src/qemu_driver.c:3019 src/qemu_driver.c:3069 #, fuzzy msgid "adding usb device failed" msgstr "載入主機定義檔" #: src/qemu_driver.c:3094 #, fuzzy msgid "cannot attach device on inactive domain" msgstr "取消定義非作用中的區域" #: src/qemu_driver.c:3116 msgid "this devicetype cannnot be attached" msgstr "" #: src/qemu_driver.c:3168 src/qemu_driver.c:3796 src/storage_driver.c:799 #, fuzzy, c-format msgid "Failed to create symlink '%s' to '%s': %s" msgstr "無法將區域 %s 存至 %s" #: src/qemu_driver.c:3175 src/qemu_driver.c:3803 src/storage_driver.c:808 #, fuzzy, c-format msgid "Failed to delete symlink '%s': %s" msgstr "無法暫停區域 %s" #: src/qemu_driver.c:3232 #, fuzzy, c-format msgid "invalid path: %s" msgstr "無效的參數，於 %s" #: src/qemu_driver.c:3240 src/qemu_driver.c:3475 msgid "'info blockstats' command failed" msgstr "" #: src/qemu_driver.c:3255 msgid "'info blockstats' not supported by this qemu" msgstr "" #: src/qemu_driver.c:3320 #, fuzzy, c-format msgid "device not found: %s (%s)" msgstr "從 %s 回復區域\n" #: src/qemu_driver.c:3352 src/qemu_driver.c:3395 msgid "NULL or empty path" msgstr "" #: src/qemu_driver.c:3363 #, c-format msgid "invalid path, '%s' is not a known interface" msgstr "" #: src/qemu_driver.c:3405 #, fuzzy msgid "invalid path" msgstr "無效的參數，於 %s" #: src/qemu_driver.c:3448 msgid "QEMU driver only supports virtual memory addrs" msgstr "" #: src/qemu_driver.c:3504 src/qemu_driver.c:3672 src/qemu_driver.c:3697 #: src/qemu_driver.c:3711 src/qemu_driver.c:3726 src/qemu_driver.c:3759 #: src/qemu_driver.c:3775 msgid "no network with matching uuid" msgstr "" #: src/qemu_driver.c:3519 msgid "no network with matching name" msgstr "" #: src/qemu_driver.c:3678 #, fuzzy msgid "network is still active" msgstr "區域已經啟動" #: src/qemu_driver.c:3739 #, fuzzy msgid "no network with matching id" msgstr "XML 格式的網路資訊" #: src/qemu_driver.c:3746 #, fuzzy msgid "failed to allocate space for network bridge string" msgstr "無法分配節點" #: src/remote_internal.c:108 src/remote_internal.c:116 msgid "tried to use a closed or uninitialised handle" msgstr "" #: src/remote_internal.c:227 #, fuzzy msgid "failed to find libvirtd binary" msgstr "無法為網路 %s 取消定義" #: src/remote_internal.c:334 msgid "" "remote_open: transport in URL not recognised (should be tls|unix|ssh|ext|tcp)" msgstr "" #: src/remote_internal.c:375 #, fuzzy msgid "allocating priv->hostname" msgstr "分配數值陣列" #: src/remote_internal.c:457 msgid "remote_open: for 'ext' transport, command is required" msgstr "" #: src/remote_internal.c:730 msgid "transport methods unix, ssh and ext are not supported under Windows" msgstr "" #: src/remote_internal.c:773 msgid "uri params" msgstr "" #: src/remote_internal.c:816 src/remote_internal.c:2494 #: src/remote_internal.c:2900 #, fuzzy msgid "struct private_data" msgstr "分配數值陣列" #: src/remote_internal.c:1026 msgid "server verification (of our certificate or IP address) failed\n" msgstr "" #: src/remote_internal.c:1081 msgid "Certificate type is not X.509" msgstr "" #: src/remote_internal.c:1086 msgid "gnutls_certificate_get_peers failed" msgstr "" #: src/remote_internal.c:1107 msgid "The certificate has expired" msgstr "" #: src/remote_internal.c:1113 msgid "The certificate is not yet activated" msgstr "" #: src/remote_internal.c:1125 #, c-format msgid "Certificate's owner does not match the hostname (%s)" msgstr "" #: src/remote_internal.c:1344 #, fuzzy, c-format msgid "too many NUMA cells: %d > %d" msgstr "過多連線" #: src/remote_internal.c:1393 src/remote_internal.c:1407 #, fuzzy, c-format msgid "too many remote domain IDs: %d > %d" msgstr "過多區域" #: src/remote_internal.c:1781 #, c-format msgid "map length greater than maximum: %d > %d" msgstr "" #: src/remote_internal.c:1813 #, c-format msgid "vCPU count exceeds maximum: %d > %d" msgstr "" #: src/remote_internal.c:1819 #, c-format msgid "vCPU map buffer length exceeds maximum: %d > %d" msgstr "" #: src/remote_internal.c:1836 #, c-format msgid "host reports too many vCPUs: %d > %d" msgstr "" #: src/remote_internal.c:1843 #, c-format msgid "host reports map buffer length exceeds maximum: %d > %d" msgstr "" #: src/remote_internal.c:2005 src/remote_internal.c:2019 #, fuzzy, c-format msgid "too many remote domain names: %d > %d" msgstr "過多區域" #: src/remote_internal.c:2221 msgid "" "remoteDomainGetSchedulerParameters: returned number of parameters exceeds " "limit" msgstr "" #: src/remote_internal.c:2249 msgid "remoteDomainGetSchedulerParameters: unknown parameter type" msgstr "" #: src/remote_internal.c:2272 #, fuzzy msgid "out of memory allocating array" msgstr "改變記憶體分配" #: src/remote_internal.c:2299 #, fuzzy msgid "unknown parameter type" msgstr "未知的作業系統類型" #: src/remote_internal.c:2389 #, c-format msgid "block peek request too large for remote protocol, %zi > %d" msgstr "" #: src/remote_internal.c:2410 src/remote_internal.c:2454 msgid "returned buffer is not same size as requested" msgstr "" #: src/remote_internal.c:2434 #, c-format msgid "memory peek request too large for remote protocol, %zi > %d" msgstr "" #: src/remote_internal.c:2557 src/remote_internal.c:2571 #: src/remote_internal.c:2616 src/remote_internal.c:2630 #, fuzzy, c-format msgid "too many remote networks: %d > %d" msgstr "過多連線" #: src/remote_internal.c:2962 src/remote_internal.c:3017 #, fuzzy msgid "too many storage pools requested" msgstr "註冊太多驅動程式" #: src/remote_internal.c:2974 src/remote_internal.c:3029 #, fuzzy msgid "too many storage pools received" msgstr "註冊太多驅動程式" #: src/remote_internal.c:3374 #, fuzzy msgid "too many storage volumes requested" msgstr "註冊太多驅動程式" #: src/remote_internal.c:3387 #, fuzzy msgid "too many storage volumes received" msgstr "註冊太多驅動程式" #: src/remote_internal.c:3623 #, fuzzy, c-format msgid "unknown authentication type %s" msgstr "未知的作業系統類型 %s" #: src/remote_internal.c:3633 #, c-format msgid "requested authentication type %s rejected" msgstr "" #: src/remote_internal.c:3674 #, fuzzy, c-format msgid "unsupported authentication type %d" msgstr "操作失敗" #: src/remote_internal.c:3922 #, fuzzy, c-format msgid "failed to initialize SASL library: %d (%s)" msgstr "無法為網路 %s 取消定義" #: src/remote_internal.c:3970 #, fuzzy, c-format msgid "Failed to create SASL client context: %d (%s)" msgstr "無法建立非運作中的區域 %s\n" #: src/remote_internal.c:3983 msgid "invalid cipher size for TLS session" msgstr "" #: src/remote_internal.c:3993 #, fuzzy, c-format msgid "cannot set external SSF %d (%s)" msgstr "無法暫停區域 %s" #: src/remote_internal.c:4012 #, fuzzy, c-format msgid "cannot set security props %d (%s)" msgstr "無法暫停區域 %s" #: src/remote_internal.c:4031 #, fuzzy, c-format msgid "SASL mechanism %s not supported by server" msgstr "不支援 hypervisor" #: src/remote_internal.c:4050 #, fuzzy, c-format msgid "Failed to start SASL negotiation: %d (%s)" msgstr "無法開啟區域 %s" #: src/remote_internal.c:4068 src/remote_internal.c:4146 #, fuzzy msgid "Failed to make auth credentials" msgstr "無法取得節點資訊" #: src/remote_internal.c:4092 #, c-format msgid "SASL negotiation data too long: %d bytes" msgstr "" #: src/remote_internal.c:4132 #, fuzzy, c-format msgid "Failed SASL step: %d (%s)" msgstr "無法暫停區域 %s" #: src/remote_internal.c:4218 #, c-format msgid "negotiation SSF %d was not strong enough" msgstr "" #: src/remote_internal.c:4272 #, fuzzy msgid "Failed to collect auth credentials" msgstr "無法取得節點資訊" #: src/remote_internal.c:4339 msgid "xdr_remote_message_header failed" msgstr "" #: src/remote_internal.c:4345 msgid "marshalling args" msgstr "" #: src/remote_internal.c:4362 msgid "xdr_int (length word)" msgstr "" #: src/remote_internal.c:4379 msgid "xdr_int (length word, reply)" msgstr "" #: src/remote_internal.c:4389 msgid "packet received from server too large" msgstr "" #: src/remote_internal.c:4401 #, fuzzy msgid "invalid header in reply" msgstr "無效的參數，於 %s" #: src/remote_internal.c:4410 #, c-format msgid "unknown program (received %x, expected %x)" msgstr "" #: src/remote_internal.c:4418 #, c-format msgid "unknown protocol version (received %x, expected %x)" msgstr "" #: src/remote_internal.c:4431 #, c-format msgid "unknown procedure (received %x, expected %x)" msgstr "" #: src/remote_internal.c:4439 #, c-format msgid "unknown direction (received %x, expected %x)" msgstr "" #: src/remote_internal.c:4446 #, c-format msgid "unknown serial (received %x, expected %x)" msgstr "" #: src/remote_internal.c:4459 msgid "unmarshalling ret" msgstr "" #: src/remote_internal.c:4469 msgid "unmarshalling remote_error" msgstr "" #: src/remote_internal.c:4489 #, c-format msgid "unknown status (received %x)" msgstr "" #: src/remote_internal.c:4598 src/remote_internal.c:4615 msgid "socket closed unexpectedly" msgstr "" #: src/sexpr.c:60 msgid "failed to allocate a node" msgstr "無法分配節點" #: src/sexpr.c:364 src/sexpr.c:381 msgid "failed to copy a string" msgstr "無法複製字串" #: src/storage_backend.c:84 #, c-format msgid "missing backend for pool type %d" msgstr "" #: src/storage_backend.c:129 #, fuzzy, c-format msgid "unknown storage backend type %s" msgstr "未知的作業系統類型 %s" #: src/storage_backend.c:159 #, fuzzy, c-format msgid "unknown storage backend type %d" msgstr "未知的作業系統類型 %s" #: src/storage_backend.c:173 src/storage_backend_fs.c:341 #, fuzzy, c-format msgid "cannot open volume '%s': %s" msgstr "無法暫停區域 %s" #: src/storage_backend.c:201 #, c-format msgid "cannot stat file '%s': %s" msgstr "" #: src/storage_backend.c:229 #, c-format msgid "cannot seek to end of file '%s':%s" msgstr "" #: src/storage_backend.c:247 #, c-format msgid "cannot get file context of %s: %s" msgstr "" #: src/storage_backend.c:256 msgid "context" msgstr "" #: src/storage_backend.c:302 #, c-format msgid "cannot read dir %s: %s" msgstr "" #: src/storage_backend.c:315 src/storage_driver.c:1197 msgid "path" msgstr "" #: src/storage_backend.c:369 msgid "regex" msgstr "" #: src/storage_backend.c:379 #, fuzzy, c-format msgid "Failed to compile regex %s" msgstr "無法暫停區域 %s" #: src/storage_backend.c:395 src/storage_backend.c:400 #: src/storage_backend.c:436 msgid "regex groups" msgstr "" #: src/storage_backend.c:412 src/storage_backend.c:546 msgid "cannot read fd" msgstr "" #: src/storage_backend.c:484 src/storage_backend.c:601 #, fuzzy, c-format msgid "failed to wait for command: %s" msgstr "無法開啟區域 %s" #: src/storage_backend.c:493 src/storage_backend.c:614 msgid "command did not exit cleanly" msgstr "" #: src/storage_backend.c:533 msgid "n_columns too large" msgstr "" #: src/storage_backend.c:580 #, fuzzy, c-format msgid "read error: %s" msgstr "內部錯誤 %s" #: src/storage_backend.c:608 #, c-format msgid "non-zero exit status from command %d" msgstr "" #: src/storage_backend_disk.c:85 src/storage_backend_logical.c:57 #, c-format msgid "unsupported pool format %s" msgstr "" #: src/storage_backend_disk.c:110 src/storage_backend_logical.c:70 #, c-format msgid "unsupported pool format %d" msgstr "" #: src/storage_backend_disk.c:138 src/storage_backend_fs.c:187 #: src/storage_backend_fs.c:257 src/storage_backend_fs.c:309 #, c-format msgid "unsupported volume format %s" msgstr "" #: src/storage_backend_disk.c:165 src/storage_backend_fs.c:220 #: src/storage_backend_fs.c:292 src/storage_backend_fs.c:324 #, c-format msgid "unsupported volume format %d" msgstr "" #: src/storage_backend_disk.c:179 src/storage_backend_disk.c:192 #: src/storage_backend_disk.c:199 src/storage_backend_disk.c:221 #: src/storage_backend_fs.c:711 src/storage_backend_iscsi.c:177 #: src/storage_backend_logical.c:116 src/storage_backend_logical.c:121 #: src/storage_backend_logical.c:133 src/storage_backend_logical.c:143 msgid "volume" msgstr "" #: src/storage_backend_disk.c:229 msgid "volume extents" msgstr "" #: src/storage_backend_disk.c:237 msgid "cannot parse device start location" msgstr "" #: src/storage_backend_disk.c:244 msgid "cannot parse device end location" msgstr "" #: src/storage_backend_disk.c:250 src/storage_backend_logical.c:154 #: src/storage_backend_logical.c:160 msgid "extents" msgstr "" #: src/storage_backend_disk.c:461 msgid "no large enough free extent" msgstr "" #: src/storage_backend_disk.c:495 msgid "Disk pools are not yet supported" msgstr "" #: src/storage_backend_fs.c:353 #, c-format msgid "cannot read header '%s': %s" msgstr "" #: src/storage_backend_fs.c:461 #, c-format msgid "cannot read %s: %s" msgstr "" #: src/storage_backend_fs.c:533 src/storage_backend_fs.c:600 #: src/storage_backend_iscsi.c:573 #, fuzzy msgid "missing source host" msgstr "找不到裝置的來源資訊" #: src/storage_backend_fs.c:538 src/storage_conf.c:319 #, fuzzy msgid "missing source path" msgstr "找不到裝置的來源資訊" #: src/storage_backend_fs.c:544 src/storage_backend_fs.c:611 #: src/storage_backend_iscsi.c:580 #, fuzzy msgid "missing source device" msgstr "找不到裝置的來源資訊" #: src/storage_backend_fs.c:560 src/storage_backend_fs.c:568 msgid "source" msgstr "" #: src/storage_backend_fs.c:605 #, fuzzy msgid "missing source dir" msgstr "找不到裝置的來源資訊" #: src/storage_backend_fs.c:677 src/storage_backend_fs.c:868 #: src/storage_backend_fs.c:907 #, c-format msgid "cannot create path '%s': %s" msgstr "" #: src/storage_backend_fs.c:700 #, fuzzy, c-format msgid "cannot open path '%s': %s" msgstr "無法暫停區域 %s" #: src/storage_backend_fs.c:719 src/storage_backend_fs.c:729 #, fuzzy msgid "volume name" msgstr "區域名稱" #: src/storage_backend_fs.c:740 msgid "volume key" msgstr "" #: src/storage_backend_fs.c:767 #, c-format msgid "cannot statvfs path '%s': %s" msgstr "" #: src/storage_backend_fs.c:828 #, c-format msgid "cannot unlink path '%s': %s" msgstr "" #: src/storage_backend_fs.c:851 msgid "target" msgstr "" #: src/storage_backend_fs.c:860 msgid "storage vol key" msgstr "" #: src/storage_backend_fs.c:885 #, c-format msgid "cannot fill file '%s': %s" msgstr "" #: src/storage_backend_fs.c:898 #, c-format msgid "cannot extend file '%s': %s" msgstr "" #: src/storage_backend_fs.c:914 src/storage_backend_fs.c:950 #: src/storage_backend_fs.c:985 src/storage_backend_logical.c:461 #, c-format msgid "cannot read path '%s': %s" msgstr "" #: src/storage_backend_fs.c:927 #, fuzzy, c-format msgid "unknown storage vol type %d" msgstr "未知的作業系統類型 %s" #: src/storage_backend_fs.c:965 #, c-format msgid "unsupported storage vol type %d" msgstr "" #: src/storage_backend_fs.c:992 msgid "creation of non-raw images is not supported without qemu-img" msgstr "" #: src/storage_backend_fs.c:1002 src/storage_backend_logical.c:470 #, fuzzy, c-format msgid "cannot set file owner '%s': %s" msgstr "無法暫停區域 %s" #: src/storage_backend_fs.c:1011 src/storage_backend_logical.c:477 #, fuzzy, c-format msgid "cannot set file mode '%s': %s" msgstr "無法暫停區域 %s" #: src/storage_backend_fs.c:1027 src/storage_backend_logical.c:484 #, c-format msgid "cannot close file '%s': %s" msgstr "" #: src/storage_backend_fs.c:1050 #, c-format msgid "cannot unlink file '%s': %s" msgstr "" #: src/storage_backend_iscsi.c:61 #, fuzzy, c-format msgid "host lookup failed %s" msgstr "操作失敗：%s" #: src/storage_backend_iscsi.c:68 #, c-format msgid "no IP address for target %s" msgstr "" #: src/storage_backend_iscsi.c:77 #, c-format msgid "cannot format ip addr for %s" msgstr "" #: src/storage_backend_iscsi.c:97 #, fuzzy msgid "session" msgstr "顯示版本" #: src/storage_backend_iscsi.c:143 msgid "cannot find session" msgstr "" #: src/storage_backend_iscsi.c:182 src/storage_driver.c:869 #, fuzzy msgid "name" msgstr "名稱" #: src/storage_backend_iscsi.c:187 msgid "devpath" msgstr "" #: src/storage_backend_iscsi.c:206 src/util.c:113 #, fuzzy, c-format msgid "cannot open %s: %s" msgstr "無法暫停區域 %s" #: src/storage_backend_iscsi.c:231 msgid "key" msgstr "" #: src/storage_backend_iscsi.c:322 src/storage_backend_iscsi.c:407 #: src/storage_backend_iscsi.c:443 #, fuzzy, c-format msgid "Failed to opendir sysfs path %s: %s" msgstr "無法暫停區域 %s" #: src/storage_backend_iscsi.c:335 #, fuzzy, c-format msgid "Failed to parse target from sysfs path %s/%s" msgstr "無法暫停區域 %s" #: src/storage_backend_iscsi.c:354 #, fuzzy, c-format msgid "Failed to find any LUNs for session %s: %s" msgstr "無法為網路 %s 取消定義" #: src/storage_backend_iscsi.c:384 #, c-format msgid "Failed to determine if %u:%u:%u:%u is a Direct-Access LUN" msgstr "" #: src/storage_backend_iscsi.c:429 #, fuzzy, c-format msgid "Failed to find device link for lun %d" msgstr "無法從 %s 建立區域" #: src/storage_backend_iscsi.c:463 #, fuzzy, c-format msgid "Failed to parse block path %s" msgstr "無法將區域 %s 存至 %s" #: src/storage_backend_iscsi.c:473 #, fuzzy msgid "Failed allocating memory for scsidev" msgstr "無法分配節點" #: src/storage_backend_iscsi.c:554 msgid "portal" msgstr "" #: src/storage_backend_logical.c:166 msgid "malformed volume extent offset value" msgstr "" #: src/storage_backend_logical.c:171 msgid "malformed volume extent length value" msgstr "" #: src/storage_backend_logical.c:176 msgid "malformed volume extent size value" msgstr "" #: src/storage_backend_logical.c:231 #, fuzzy msgid "lvs command failed" msgstr "區域名稱" #: src/storage_backend_logical.c:237 #, c-format msgid "lvs command failed with exitstatus %d" msgstr "" #: src/storage_backend_logical.c:286 #, fuzzy msgid "command line" msgstr "區域名稱" #: src/storage_backend_logical.c:303 #, c-format msgid "cannot open device %s" msgstr "" #: src/storage_backend_logical.c:309 #, c-format msgid "cannot clear device header %s" msgstr "" #: src/storage_backend_logical.c:316 #, c-format msgid "cannot close device %s" msgstr "" #: src/storage_backend_logical.c:493 #, c-format msgid "cannot find newly created volume '%s': %s" msgstr "" #: src/storage_conf.c:155 msgid "missing auth host attribute" msgstr "" #: src/storage_conf.c:162 msgid "missing auth passwd attribute" msgstr "" #: src/storage_conf.c:185 src/storage_conf.c:566 msgid "malformed octal mode" msgstr "" #: src/storage_conf.c:195 msgid "malformed owner element" msgstr "" #: src/storage_conf.c:206 msgid "malformed group element" msgstr "" #: src/storage_conf.c:231 #, fuzzy msgid "cannot allocate storage pool" msgstr "分配節點" #: src/storage_conf.c:237 src/storage_conf.c:694 #, fuzzy msgid "unknown root element" msgstr "未知的主機 %s" #: src/storage_conf.c:253 src/storage_conf.c:701 msgid "missing name element" msgstr "" #: src/storage_conf.c:261 #, fuzzy msgid "unable to generate uuid" msgstr "網路名稱或 uuid" #: src/storage_conf.c:285 #, fuzzy msgid "missing source host name" msgstr "找不到裝置的來源資訊" #: src/storage_conf.c:295 msgid "cannot extract source devices" msgstr "" #: src/storage_conf.c:300 #, fuzzy msgid "device" msgstr "以組絕" #: src/storage_conf.c:308 #, fuzzy msgid "missing source device path" msgstr "找不到 root 裝置的資訊" #: src/storage_conf.c:333 #, fuzzy, c-format msgid "unknown auth type '%s'" msgstr "未知的作業系統類型 %s" #: src/storage_conf.c:348 #, fuzzy msgid "missing target path" msgstr "找不到裝置的目標資訊" #: src/storage_conf.c:460 #, fuzzy msgid "unexpected pool type" msgstr "無預期的 mime 類型" #: src/storage_conf.c:544 src/storage_conf.c:898 msgid "xml" msgstr "" #: src/storage_conf.c:576 src/storage_conf.c:586 msgid "missing owner element" msgstr "" #: src/storage_conf.c:650 #, fuzzy, c-format msgid "unknown size units '%s'" msgstr "未知的主機 %s" #: src/storage_conf.c:657 msgid "malformed capacity element" msgstr "" #: src/storage_conf.c:662 msgid "capacity element value too large" msgstr "" #: src/storage_conf.c:688 #, fuzzy msgid "cannot allocate storage vol" msgstr "分配節點" #: src/storage_conf.c:712 msgid "missing capacity element" msgstr "" #: src/storage_conf.c:1009 msgid "pool" msgstr "" #: src/storage_conf.c:1151 msgid "configFile" msgstr "" #: src/storage_conf.c:1158 msgid "cannot construct autostart link path" msgstr "" #: src/storage_conf.c:1165 msgid "config file" msgstr "" #: src/storage_conf.c:1173 #, fuzzy msgid "failed to generate XML" msgstr "無法讀取插槽 %d\n" #: src/storage_driver.c:266 src/storage_driver.c:750 src/storage_driver.c:772 msgid "no pool with matching uuid" msgstr "" #: src/storage_driver.c:284 msgid "no pool with matching name" msgstr "" #: src/storage_driver.c:334 src/storage_driver.c:371 #, fuzzy msgid "names" msgstr "名稱" #: src/storage_driver.c:406 msgid "storage pool already exists" msgstr "" #: src/storage_driver.c:479 src/storage_driver.c:516 src/storage_driver.c:555 #: src/storage_driver.c:586 src/storage_driver.c:627 src/storage_driver.c:664 #: src/storage_driver.c:705 src/storage_driver.c:734 src/storage_driver.c:828 #: src/storage_driver.c:853 src/storage_driver.c:898 src/storage_driver.c:982 #: src/storage_driver.c:1036 src/storage_driver.c:1099 #: src/storage_driver.c:1143 src/storage_driver.c:1177 msgid "no storage pool with matching uuid" msgstr "" #: src/storage_driver.c:485 msgid "pool is still active" msgstr "" #: src/storage_driver.c:526 #, fuzzy msgid "pool already active" msgstr "區域已經啟動" #: src/storage_driver.c:565 #, fuzzy msgid "storage pool is already active" msgstr "區域已經啟動" #: src/storage_driver.c:596 src/storage_driver.c:674 src/storage_driver.c:834 #: src/storage_driver.c:859 src/storage_driver.c:904 src/storage_driver.c:988 #: src/storage_driver.c:1042 src/storage_driver.c:1105 #: src/storage_driver.c:1149 src/storage_driver.c:1183 msgid "storage pool is not active" msgstr "" #: src/storage_driver.c:637 msgid "storage pool is still active" msgstr "" #: src/storage_driver.c:643 msgid "pool does not support volume delete" msgstr "" #: src/storage_driver.c:778 msgid "pool has no config file" msgstr "" #: src/storage_driver.c:912 src/storage_driver.c:1053 #: src/storage_driver.c:1113 src/storage_driver.c:1157 #: src/storage_driver.c:1191 msgid "no storage vol with matching name" msgstr "" #: src/storage_driver.c:941 msgid "no storage vol with matching key" msgstr "" #: src/storage_driver.c:966 msgid "no storage vol with matching path" msgstr "" #: src/storage_driver.c:1001 msgid "storage vol already exists" msgstr "" #: src/storage_driver.c:1008 msgid "storage pool does not support volume creation" msgstr "" #: src/storage_driver.c:1059 msgid "storage pool does not support vol deletion" msgstr "" #: src/test.c:235 src/test.c:878 msgid "getting time of day" msgstr "讀取當天的時間" #: src/test.c:333 msgid "loading host definition file" msgstr "載入主機定義檔" #: src/test.c:340 msgid "host" msgstr "主機" #: src/test.c:348 msgid "node" msgstr "節點" #: src/test.c:354 msgid "creating xpath context" msgstr "建立 xpath 的內文" #: src/test.c:369 msgid "node cpu numa nodes" msgstr "節點的處理器 numa 節點" #: src/test.c:377 msgid "node cpu sockets" msgstr "結點的處理器插槽" #: src/test.c:385 msgid "node cpu cores" msgstr "節點的處理器核心" #: src/test.c:393 msgid "node cpu threads" msgstr "節點的處理器執行續" #: src/test.c:404 msgid "node active cpu" msgstr "節點啟用中的處理器" #: src/test.c:411 msgid "node cpu mhz" msgstr "節點的處理器速度（MHz）" #: src/test.c:426 msgid "node memory" msgstr "節點的記憶體" #: src/test.c:432 msgid "node domain list" msgstr "節點的區域清單" #: src/test.c:443 msgid "resolving domain filename" msgstr "解析區域的檔名" #: src/test.c:469 #, fuzzy msgid "node network list" msgstr "節點的區域清單" #: src/test.c:479 #, fuzzy msgid "resolving network filename" msgstr "解析區域的檔名" #: src/test.c:557 msgid "testOpen: supply a path or use test:///default" msgstr "" #: src/test.c:794 #, fuzzy msgid "domain not paused" msgstr "區域資訊" #: src/test.c:809 #, fuzzy msgid "domain not running" msgstr "區域還在執行中" #: src/test.c:904 msgid "cannot allocate space for metadata" msgstr "" #: src/test.c:910 #, fuzzy msgid "cannot save domain" msgstr "自動啟動一個區域" #: src/test.c:916 src/test.c:1030 msgid "cannot write header" msgstr "" #: src/test.c:922 msgid "cannot write metadata length" msgstr "" #: src/test.c:928 msgid "cannot write metadata" msgstr "" #: src/test.c:936 src/test.c:1036 #, fuzzy msgid "cannot save domain data" msgstr "節點的區域清單" #: src/test.c:965 msgid "incomplete save header" msgstr "" #: src/test.c:971 msgid "mismatched header magic" msgstr "" #: src/test.c:977 #, fuzzy msgid "failed to read metadata length" msgstr "無法從 Xen 系統程式讀取" #: src/test.c:983 msgid "length of metadata out of range" msgstr "" #: src/test.c:994 msgid "incomplete metdata" msgstr "" #: src/test.c:1025 #, fuzzy msgid "cannot save domain core" msgstr "節點的區域清單" #: src/test.c:1185 msgid "Range exceeds available cells" msgstr "" #: src/test.c:1204 msgid "Domain is already running" msgstr "區域已經啟動" #: src/test.c:1219 msgid "Domain is still running" msgstr "區域還在執行中" #: src/test.c:1459 #, fuzzy msgid "Network is still running" msgstr "區域還在執行中" #: src/test.c:1474 #, fuzzy msgid "Network is already running" msgstr "區域已經啟動" #: src/util.c:121 #, fuzzy, c-format msgid "cannot create pipe: %s" msgstr "無法讀取插槽 %d\n" #: src/util.c:127 #, fuzzy, c-format msgid "cannot fork child process: %s" msgstr "無法暫停區域 %s" #: src/util.c:495 #, c-format msgid "%s: not implemented\n" msgstr "" #: src/uuid.c:103 #, c-format msgid "Falling back to pseudorandom UUID, failed to generate random bytes: %s" msgstr "" #: src/virsh.c:337 msgid "print help" msgstr "列印求助訊息" #: src/virsh.c:338 msgid "Prints global help or command specific help." msgstr "列印一般求助訊息，或特定指令的求助訊息。" #: src/virsh.c:344 #, fuzzy msgid "name of command" msgstr "非作用中區域的名稱" #: src/virsh.c:356 msgid "" "Commands:\n" "\n" msgstr "" "指令：\n" "\n" #: src/virsh.c:370 msgid "autostart a domain" msgstr "自動啟動一個區域" #: src/virsh.c:372 msgid "Configure a domain to be automatically started at boot." msgstr "將區域設定為開機時自動啟動。" #: src/virsh.c:377 src/virsh.c:477 src/virsh.c:671 src/virsh.c:708 #: src/virsh.c:765 src/virsh.c:832 src/virsh.c:1067 src/virsh.c:1111 #: src/virsh.c:1300 src/virsh.c:1345 src/virsh.c:1384 src/virsh.c:1423 #: src/virsh.c:1462 src/virsh.c:1501 src/virsh.c:1625 src/virsh.c:1712 #: src/virsh.c:1846 src/virsh.c:1903 src/virsh.c:1960 src/virsh.c:2082 #: src/virsh.c:2223 src/virsh.c:4314 src/virsh.c:4390 src/virsh.c:4451 #: src/virsh.c:4508 src/virsh.c:4565 src/virsh.c:4679 src/virsh.c:4798 #: src/virsh.c:4961 src/virsh.c:5190 msgid "domain name, id or uuid" msgstr "區域名稱、id 或 uuid" #: src/virsh.c:378 src/virsh.c:2287 src/virsh.c:2784 msgid "disable autostarting" msgstr "停用自動啟動" #: src/virsh.c:399 #, fuzzy, c-format msgid "Failed to mark domain %s as autostarted" msgstr "無法將區域 %s 標示為 %s 自動啟動" #: src/virsh.c:402 #, fuzzy, c-format msgid "Failed to unmark domain %s as autostarted" msgstr "無法將區域 %s 標示為 %s 自動啟動" #: src/virsh.c:409 #, fuzzy, c-format msgid "Domain %s marked as autostarted\n" msgstr "區域 %s %s已標記為自動啟動\n" #: src/virsh.c:411 #, fuzzy, c-format msgid "Domain %s unmarked as autostarted\n" msgstr "區域 %s %s已標記為自動啟動\n" #: src/virsh.c:422 msgid "(re)connect to hypervisor" msgstr "（重新）連至 hypervisor" #: src/virsh.c:424 msgid "" "Connect to local hypervisor. This is built-in command after shell start up." msgstr "連上本機的 hypervisor。這是 shell 啟動後的內建指令。" #: src/virsh.c:429 msgid "hypervisor connection URI" msgstr "hypervisor 連線的 URI" #: src/virsh.c:430 msgid "read-only connection" msgstr "唯讀的連線" #: src/virsh.c:442 msgid "Failed to disconnect from the hypervisor" msgstr "無法從 hypervisor 處斷線" #: src/virsh.c:460 msgid "Failed to connect to the hypervisor" msgstr "無法連上 hypervisor" #: src/virsh.c:470 msgid "connect to the guest console" msgstr "連接客座端主控台" #: src/virsh.c:472 msgid "Connect the virtual serial console for the guest" msgstr "透過虛擬序列埠主控台，連接用戶端" #: src/virsh.c:519 msgid "No console available for domain\n" msgstr "區域中沒有可用的主控台\n" #: src/virsh.c:536 msgid "console not implemented on this platform" msgstr "" #: src/virsh.c:547 msgid "list domains" msgstr "列出區域" #: src/virsh.c:548 msgid "Returns list of domains." msgstr "傳回區域清單。" #: src/virsh.c:553 msgid "list inactive domains" msgstr "列出非作用中的區域" #: src/virsh.c:554 msgid "list inactive & active domains" msgstr "列出作用中與非作用中的區域" #: src/virsh.c:576 src/virsh.c:583 msgid "Failed to list active domains" msgstr "無法列出運作中的區域" #: src/virsh.c:594 src/virsh.c:602 msgid "Failed to list inactive domains" msgstr "無法列出非作用中的區域" #: src/virsh.c:611 msgid "Id" msgstr "Id" #: src/virsh.c:611 src/virsh.c:2570 src/virsh.c:3367 src/virsh.c:4030 msgid "Name" msgstr "名稱" #: src/virsh.c:611 src/virsh.c:2570 src/virsh.c:3367 msgid "State" msgstr "狀態" #: src/virsh.c:624 src/virsh.c:646 src/virsh.c:6147 src/virsh.c:6163 msgid "no state" msgstr "無狀態" #: src/virsh.c:665 msgid "domain state" msgstr "區域狀態" #: src/virsh.c:666 #, fuzzy msgid "Returns state about a domain." msgstr "傳回執行中區域的狀態" #: src/virsh.c:702 msgid "get device block stats for a domain" msgstr "" #: src/virsh.c:703 #, fuzzy msgid "Get device block stats for a running domain." msgstr "傳回執行中區域的狀態" #: src/virsh.c:709 #, fuzzy msgid "block device" msgstr "以組絕" #: src/virsh.c:730 #, fuzzy, c-format msgid "Failed to get block stats %s %s" msgstr "無法將區域 %s 存至 %s" #: src/virsh.c:759 #, fuzzy msgid "get network interface stats for a domain" msgstr "網路名稱" #: src/virsh.c:760 #, fuzzy msgid "Get network interface stats for a running domain." msgstr "傳回執行中區域的狀態" #: src/virsh.c:766 msgid "interface device" msgstr "" #: src/virsh.c:787 #, fuzzy, c-format msgid "Failed to get interface stats %s %s" msgstr "無法取得節點資訊" #: src/virsh.c:826 msgid "suspend a domain" msgstr "暫停區域" #: src/virsh.c:827 msgid "Suspend a running domain." msgstr "暫停執行中的區域。" #: src/virsh.c:850 #, c-format msgid "Domain %s suspended\n" msgstr "區域 %s 已經暫停\n" #: src/virsh.c:852 #, c-format msgid "Failed to suspend domain %s" msgstr "無法暫停區域 %s" #: src/virsh.c:865 msgid "create a domain from an XML file" msgstr "從 XML 檔案建立區域" #: src/virsh.c:866 msgid "Create a domain." msgstr "建立區域。" #: src/virsh.c:871 src/virsh.c:919 #, fuzzy msgid "file containing an XML domain description" msgstr "包含 XML 區域描述的檔案" #: src/virsh.c:898 #, c-format msgid "Domain %s created from %s\n" msgstr "區域 %s 建立自 %s\n" #: src/virsh.c:902 #, c-format msgid "Failed to create domain from %s" msgstr "無法從 %s 建立區域" #: src/virsh.c:913 msgid "define (but don't start) a domain from an XML file" msgstr "從 XML 檔案定義（但不啟動）區域" #: src/virsh.c:914 msgid "Define a domain." msgstr "定義區域。" #: src/virsh.c:946 #, c-format msgid "Domain %s defined from %s\n" msgstr "區域 %s 定義自 %s\n" #: src/virsh.c:950 #, c-format msgid "Failed to define domain from %s" msgstr "無法從 %s 定義區域" #: src/virsh.c:961 msgid "undefine an inactive domain" msgstr "取消定義非作用中的區域" #: src/virsh.c:962 msgid "Undefine the configuration for an inactive domain." msgstr "為非作用中的區域取消定義。" #: src/virsh.c:967 src/virsh.c:2151 msgid "domain name or uuid" msgstr "區域名稱或 uuid" #: src/virsh.c:989 #, c-format msgid "" "a running domain like %s cannot be undefined;\n" "to undefine, first shutdown then undefine using its name or UUID" msgstr "" #: src/virsh.c:1000 #, c-format msgid "Domain %s has been undefined\n" msgstr "區域 %s 已經取消定義\n" #: src/virsh.c:1002 #, c-format msgid "Failed to undefine domain %s" msgstr "無法為區域 %s 取消定義" #: src/virsh.c:1016 msgid "start a (previously defined) inactive domain" msgstr "開啟（先前定義的）非作用中區域" #: src/virsh.c:1017 msgid "Start a domain." msgstr "開啟一個區域。" #: src/virsh.c:1022 msgid "name of the inactive domain" msgstr "非作用中區域的名稱" #: src/virsh.c:1039 msgid "Domain is already active" msgstr "區域已經啟動" #: src/virsh.c:1045 #, c-format msgid "Domain %s started\n" msgstr "區域 %s 已開啟\n" #: src/virsh.c:1048 #, c-format msgid "Failed to start domain %s" msgstr "無法開啟區域 %s" #: src/virsh.c:1061 msgid "save a domain state to a file" msgstr "將區域狀態存至檔案" #: src/virsh.c:1062 msgid "Save a running domain." msgstr "儲存執行中的區域。" #: src/virsh.c:1068 msgid "where to save the data" msgstr "將資料存至何處" #: src/virsh.c:1090 #, c-format msgid "Domain %s saved to %s\n" msgstr "區域 %s 已存至 %s\n" #: src/virsh.c:1092 #, c-format msgid "Failed to save domain %s to %s" msgstr "無法將區域 %s 存至 %s" #: src/virsh.c:1105 msgid "show/set scheduler parameters" msgstr "" #: src/virsh.c:1106 msgid "Show/Set scheduler parameters." msgstr "" #: src/virsh.c:1112 msgid "weight for XEN_CREDIT" msgstr "" #: src/virsh.c:1113 msgid "cap for XEN_CREDIT" msgstr "" #: src/virsh.c:1145 #, fuzzy msgid "Invalid value of weight" msgstr "記憶體大小 %d 不是有效的數值" #: src/virsh.c:1155 #, fuzzy msgid "Invalid value of cap" msgstr "記憶體大小 %d 不是有效的數值" #: src/virsh.c:1197 src/virsh.c:1201 msgid "Scheduler" msgstr "" #: src/virsh.c:1201 #, fuzzy msgid "Unknown" msgstr "未知的主機" #: src/virsh.c:1256 msgid "restore a domain from a saved state in a file" msgstr "從檔案中的儲存狀態回復區域" #: src/virsh.c:1257 msgid "Restore a domain." msgstr "回復區域。" #: src/virsh.c:1262 msgid "the state to restore" msgstr "要回復的狀態" #: src/virsh.c:1281 #, c-format msgid "Domain restored from %s\n" msgstr "從 %s 回復區域\n" #: src/virsh.c:1283 #, c-format msgid "Failed to restore domain from %s" msgstr "無法從 %s 回復區域" #: src/virsh.c:1294 msgid "dump the core of a domain to a file for analysis" msgstr "將一個區域的核心傾印到檔案中，以供分析用" #: src/virsh.c:1295 msgid "Core dump a domain." msgstr "傾印一個區域的核心。" #: src/virsh.c:1301 msgid "where to dump the core" msgstr "將核心傾印至何處" #: src/virsh.c:1323 #, c-format msgid "Domain %s dumpd to %s\n" msgstr "區域 %s 已傾印至 %s\n" #: src/virsh.c:1325 #, c-format msgid "Failed to core dump domain %s to %s" msgstr "無法將區域 %s 的核心傾印至 %s" #: src/virsh.c:1339 msgid "resume a domain" msgstr "繼續執行區域" #: src/virsh.c:1340 msgid "Resume a previously suspended domain." msgstr "繼續一項先前暫停的區域。" #: src/virsh.c:1363 #, c-format msgid "Domain %s resumed\n" msgstr "區域 %s 已經繼續執行\n" #: src/virsh.c:1365 #, c-format msgid "Failed to resume domain %s" msgstr "無法繼續區域 %s" #: src/virsh.c:1378 msgid "gracefully shutdown a domain" msgstr "以正確方法讓區域停機" #: src/virsh.c:1379 msgid "Run shutdown in the target domain." msgstr "在目標區域執行關機。" #: src/virsh.c:1402 #, c-format msgid "Domain %s is being shutdown\n" msgstr "區域 %s 正在執行關機\n" #: src/virsh.c:1404 #, c-format msgid "Failed to shutdown domain %s" msgstr "無法關上區域 %s" #: src/virsh.c:1417 msgid "reboot a domain" msgstr "重新啟動區域" #: src/virsh.c:1418 msgid "Run a reboot command in the target domain." msgstr "在目標區域中執行重新開機指令。" #: src/virsh.c:1441 #, c-format msgid "Domain %s is being rebooted\n" msgstr "區域 %s 正在重新開機中\n" #: src/virsh.c:1443 #, c-format msgid "Failed to reboot domain %s" msgstr "無法重新啟動區域 %s" #: src/virsh.c:1456 msgid "destroy a domain" msgstr "刪除一個區域" #: src/virsh.c:1457 msgid "Destroy a given domain." msgstr "刪除給定的區域。" #: src/virsh.c:1480 #, c-format msgid "Domain %s destroyed\n" msgstr "區域 %s 已經刪除\n" #: src/virsh.c:1482 #, c-format msgid "Failed to destroy domain %s" msgstr "無法刪除區域 %s" #: src/virsh.c:1495 msgid "domain information" msgstr "區域資訊" #: src/virsh.c:1496 msgid "Returns basic information about the domain." msgstr "傳回區域的相關資訊。" #: src/virsh.c:1522 src/virsh.c:1524 msgid "Id:" msgstr "Id:" #: src/virsh.c:1525 src/virsh.c:3472 src/virsh.c:3918 msgid "Name:" msgstr "名稱：" #: src/virsh.c:1528 src/virsh.c:3475 msgid "UUID:" msgstr "UUID：" #: src/virsh.c:1531 msgid "OS Type:" msgstr "作業系統類型：" #: src/virsh.c:1536 src/virsh.c:1669 src/virsh.c:3482 src/virsh.c:3486 #: src/virsh.c:3490 src/virsh.c:3494 msgid "State:" msgstr "狀態：" #: src/virsh.c:1539 src/virsh.c:2032 msgid "CPU(s):" msgstr "處理器數目：" #: src/virsh.c:1546 src/virsh.c:1676 msgid "CPU time:" msgstr "處理器時間：" #: src/virsh.c:1550 src/virsh.c:1553 msgid "Max memory:" msgstr "最大記憶體：" #: src/virsh.c:1554 msgid "no limit" msgstr "沒有限制" #: src/virsh.c:1556 msgid "Used memory:" msgstr "已使用的記憶體：" #: src/virsh.c:1564 #, fuzzy msgid "Autostart:" msgstr "自動啟動" #: src/virsh.c:1565 #, fuzzy msgid "enable" msgstr "名稱" #: src/virsh.c:1565 msgid "disable" msgstr "" #: src/virsh.c:1577 #, fuzzy msgid "NUMA free memory" msgstr "已使用的記憶體：" #: src/virsh.c:1578 msgid "display available free memory for the NUMA cell." msgstr "" #: src/virsh.c:1583 #, fuzzy msgid "NUMA cell number" msgstr "NUMA cell：" #: src/virsh.c:1607 msgid "Total" msgstr "" #: src/virsh.c:1619 msgid "domain vcpu information" msgstr "區域 vcpu 的資訊" #: src/virsh.c:1620 msgid "Returns basic information about the domain virtual CPUs." msgstr "傳回區域的虛擬處理器之基本資訊。" #: src/virsh.c:1667 msgid "VCPU:" msgstr "VCPU：" #: src/virsh.c:1668 msgid "CPU:" msgstr "處理器：" #: src/virsh.c:1678 msgid "CPU Affinity:" msgstr "處理器的同屬：" #: src/virsh.c:1690 msgid "Domain shut off, virtual CPUs not present." msgstr "" #: src/virsh.c:1706 msgid "control domain vcpu affinity" msgstr "控制區域 vcpu 的同屬" #: src/virsh.c:1707 msgid "Pin domain VCPUs to host physical CPUs." msgstr "讓區域 VCPU 符合主機的實際處理器。" #: src/virsh.c:1713 msgid "vcpu number" msgstr "vcpu 數量" #: src/virsh.c:1714 msgid "host cpu number(s) (comma separated)" msgstr "主機處理器數目（以逗號隔開）" #: src/virsh.c:1742 msgid "vcpupin: Invalid or missing vCPU number." msgstr "" #: src/virsh.c:1748 msgid "vcpupin: Missing cpulist" msgstr "" #: src/virsh.c:1760 #, fuzzy msgid "vcpupin: failed to get domain informations." msgstr "無法取得節點資訊" #: src/virsh.c:1766 msgid "vcpupin: Invalid vCPU number." msgstr "" #: src/virsh.c:1775 msgid "cpulist: Invalid format. Empty string." msgstr "" #: src/virsh.c:1785 #, c-format msgid "" "cpulist: %s: Invalid format. Expecting digit at position %d (near '%c')." msgstr "" #: src/virsh.c:1795 #, c-format msgid "" "cpulist: %s: Invalid format. Expecting digit or comma at position %d (near '%" "c')." msgstr "" #: src/virsh.c:1802 #, c-format msgid "cpulist: %s: Invalid format. Trailing comma at position %d." msgstr "" #: src/virsh.c:1816 #, c-format msgid "Physical CPU %d doesn't exist." msgstr "實體處理器「%d」不存在。" #: src/virsh.c:1840 msgid "change number of virtual CPUs" msgstr "改變虛擬處理器的數量" #: src/virsh.c:1841 #, fuzzy msgid "Change the number of virtual CPUs in the guest domain." msgstr "改變在客座區域中啟用的虛擬器處理器數量" #: src/virsh.c:1847 msgid "number of virtual CPUs" msgstr "虛擬處理器的數量" #: src/virsh.c:1867 #, fuzzy msgid "Invalid number of virtual CPUs." msgstr "虛擬處理器的數量" #: src/virsh.c:1879 #, fuzzy msgid "Too many virtual CPUs." msgstr "太多虛擬處理器。" #: src/virsh.c:1897 msgid "change memory allocation" msgstr "改變記憶體分配" #: src/virsh.c:1898 msgid "Change the current memory allocation in the guest domain." msgstr "改變客座區域中，目前的記憶體分配。" #: src/virsh.c:1904 #, fuzzy msgid "number of kilobytes of memory" msgstr "記憶體數量（位元組）" #: src/virsh.c:1925 src/virsh.c:1937 src/virsh.c:1982 #, c-format msgid "Invalid value of %d for memory size" msgstr "記憶體大小 %d 不是有效的數值" #: src/virsh.c:1931 msgid "Unable to verify MaxMemorySize" msgstr "" #: src/virsh.c:1954 msgid "change maximum memory limit" msgstr "改變最大記憶體的限制" #: src/virsh.c:1955 msgid "Change the maximum memory allocation limit in the guest domain." msgstr "改變客座區域的最大記憶體分配限制。" #: src/virsh.c:1961 #, fuzzy msgid "maximum memory limit in kilobytes" msgstr "最大記憶體限制（位元組）" #: src/virsh.c:1988 msgid "Unable to verify current MemorySize" msgstr "" #: src/virsh.c:1995 #, fuzzy msgid "Unable to shrink current MemorySize" msgstr "區域目前的記憶體" #: src/virsh.c:2001 msgid "Unable to change MaxMemorySize" msgstr "" #: src/virsh.c:2014 msgid "node information" msgstr "節點資訊" #: src/virsh.c:2015 msgid "Returns basic information about the node." msgstr "傳回節點的基本資訊。" #: src/virsh.c:2028 msgid "failed to get node information" msgstr "無法取得節點資訊" #: src/virsh.c:2031 msgid "CPU model:" msgstr "處理器類型：" #: src/virsh.c:2033 msgid "CPU frequency:" msgstr "處理器的頻率：" #: src/virsh.c:2034 msgid "CPU socket(s):" msgstr "處理器的插槽：" #: src/virsh.c:2035 msgid "Core(s) per socket:" msgstr "每個插槽的核心：" #: src/virsh.c:2036 msgid "Thread(s) per core:" msgstr "每個核心的執行續：" #: src/virsh.c:2037 msgid "NUMA cell(s):" msgstr "NUMA cell：" #: src/virsh.c:2038 msgid "Memory size:" msgstr "記憶體大小：" #: src/virsh.c:2048 msgid "capabilities" msgstr "能力" #: src/virsh.c:2049 msgid "Returns capabilities of hypervisor/driver." msgstr "傳回 hypervisor 或驅動程式的能力。" #: src/virsh.c:2062 msgid "failed to get capabilities" msgstr "無法取得能力方面的資訊" #: src/virsh.c:2076 msgid "domain information in XML" msgstr "XML 格式的區域資訊" #: src/virsh.c:2077 #, fuzzy msgid "Output the domain information as an XML dump to stdout." msgstr "將區域資訊以 XML 格式輸出到螢幕上。" #: src/virsh.c:2116 msgid "convert a domain id or UUID to domain name" msgstr "將區域 id 或 UUID 轉為區域名稱" #: src/virsh.c:2121 msgid "domain id or uuid" msgstr "區域 id 或 uuid" #: src/virsh.c:2146 msgid "convert a domain name or UUID to domain id" msgstr "將區域名稱或 UUID 轉為區域 ID" #: src/virsh.c:2181 msgid "convert a domain name or id to domain UUID" msgstr "將區域名稱或 ID 轉為 UUID" #: src/virsh.c:2186 msgid "domain id or name" msgstr "區域 ID 或名稱" #: src/virsh.c:2205 msgid "failed to get domain UUID" msgstr "無法取得區域 UUID" #: src/virsh.c:2216 msgid "migrate domain to another host" msgstr "" #: src/virsh.c:2217 msgid "Migrate domain to another host. Add --live for live migration." msgstr "" #: src/virsh.c:2222 #, fuzzy msgid "live migration" msgstr "節點資訊" #: src/virsh.c:2224 #, fuzzy msgid "connection URI of the destination host" msgstr "連接客座端主控台" #: src/virsh.c:2225 msgid "migration URI, usually can be omitted" msgstr "" #: src/virsh.c:2247 msgid "migrate: Missing desturi" msgstr "" #: src/virsh.c:2279 msgid "autostart a network" msgstr "自動啟動網路" #: src/virsh.c:2281 msgid "Configure a network to be automatically started at boot." msgstr "將網路設定為開機時自動啟動。" #: src/virsh.c:2286 src/virsh.c:2707 msgid "network name or uuid" msgstr "網路名稱或 uuid" #: src/virsh.c:2308 #, fuzzy, c-format msgid "failed to mark network %s as autostarted" msgstr "無法%s將網路標記為%s自動啟動" #: src/virsh.c:2311 #, fuzzy, c-format msgid "failed to unmark network %s as autostarted" msgstr "無法%s將網路標記為%s自動啟動" #: src/virsh.c:2318 #, fuzzy, c-format msgid "Network %s marked as autostarted\n" msgstr "網路 %s %s標記為自動啟動\n" #: src/virsh.c:2320 #, fuzzy, c-format msgid "Network %s unmarked as autostarted\n" msgstr "網路 %s %s標記為自動啟動\n" #: src/virsh.c:2330 msgid "create a network from an XML file" msgstr "從 XML 檔案建立網路" #: src/virsh.c:2331 msgid "Create a network." msgstr "建立網路。" #: src/virsh.c:2336 src/virsh.c:2384 msgid "file containing an XML network description" msgstr "包含 XML 網路描述的檔案" #: src/virsh.c:2363 #, c-format msgid "Network %s created from %s\n" msgstr "網路 %s 建立自 %s\n" #: src/virsh.c:2366 #, c-format msgid "Failed to create network from %s" msgstr "無法從 %s 建立網路" #: src/virsh.c:2378 msgid "define (but don't start) a network from an XML file" msgstr "從 XML 檔案定義（但不啟動）網路" #: src/virsh.c:2379 msgid "Define a network." msgstr "定義網路。" #: src/virsh.c:2411 #, c-format msgid "Network %s defined from %s\n" msgstr "網路 %s 定義自 %s\n" #: src/virsh.c:2414 #, c-format msgid "Failed to define network from %s" msgstr "無法從 %s 定義網路" #: src/virsh.c:2426 msgid "destroy a network" msgstr "刪除一個網路" #: src/virsh.c:2427 msgid "Destroy a given network." msgstr "刪除給定的網路。" #: src/virsh.c:2432 src/virsh.c:2472 src/virsh.c:5293 msgid "network name, id or uuid" msgstr "網路名稱、id 或 uuid" #: src/virsh.c:2450 #, c-format msgid "Network %s destroyed\n" msgstr "網路 %s 已經刪除\n" #: src/virsh.c:2452 #, c-format msgid "Failed to destroy network %s" msgstr "無法刪除網路 %s" #: src/virsh.c:2466 msgid "network information in XML" msgstr "XML 格式的網路資訊" #: src/virsh.c:2467 #, fuzzy msgid "Output the network information as an XML dump to stdout." msgstr "將網路資訊以 XML 格式輸出到螢幕上。" #: src/virsh.c:2507 msgid "list networks" msgstr "列出網路" #: src/virsh.c:2508 msgid "Returns list of networks." msgstr "傳回網路清單。" #: src/virsh.c:2513 msgid "list inactive networks" msgstr "列出非作用中的網路" #: src/virsh.c:2514 msgid "list inactive & active networks" msgstr "列出作用中與非作用中的網路" #: src/virsh.c:2534 src/virsh.c:2542 msgid "Failed to list active networks" msgstr "無法列出運作中的網路" #: src/virsh.c:2553 src/virsh.c:2561 msgid "Failed to list inactive networks" msgstr "無法列出非作用中的網路" #: src/virsh.c:2570 src/virsh.c:3367 msgid "Autostart" msgstr "自動啟動" #: src/virsh.c:2585 src/virsh.c:2608 src/virsh.c:3382 src/virsh.c:3405 msgid "no autostart" msgstr "不自動啟動" #: src/virsh.c:2591 src/virsh.c:3388 msgid "active" msgstr "啟用" #: src/virsh.c:2614 src/virsh.c:3411 src/virsh.c:3483 msgid "inactive" msgstr "非啟用中" #: src/virsh.c:2631 msgid "convert a network UUID to network name" msgstr "將網路 id 或 UUID 轉為網路名稱" #: src/virsh.c:2636 msgid "network uuid" msgstr "網路 uuid" #: src/virsh.c:2662 msgid "start a (previously defined) inactive network" msgstr "開啟（先前定義的）非作用中網路" #: src/virsh.c:2663 msgid "Start a network." msgstr "啟動一個網路。" #: src/virsh.c:2668 msgid "name of the inactive network" msgstr "非作用中網路的名稱" #: src/virsh.c:2685 #, c-format msgid "Network %s started\n" msgstr "網路 %s 已開啟\n" #: src/virsh.c:2688 #, c-format msgid "Failed to start network %s" msgstr "無法開啟網路 %s" #: src/virsh.c:2701 msgid "undefine an inactive network" msgstr "取消定義非作用中的網路" #: src/virsh.c:2702 msgid "Undefine the configuration for an inactive network." msgstr "為非作用中的網路取消定義。" #: src/virsh.c:2725 #, c-format msgid "Network %s has been undefined\n" msgstr "網路 %s 已經取消定義\n" #: src/virsh.c:2727 #, c-format msgid "Failed to undefine network %s" msgstr "無法為網路 %s 取消定義" #: src/virsh.c:2740 msgid "convert a network name to network UUID" msgstr "將網路名稱轉為網路 UUID" #: src/virsh.c:2745 msgid "network name" msgstr "網路名稱" #: src/virsh.c:2765 msgid "failed to get network UUID" msgstr "無法取得網路 UUID" #: src/virsh.c:2776 #, fuzzy msgid "autostart a pool" msgstr "自動啟動一個區域" #: src/virsh.c:2778 #, fuzzy msgid "Configure a pool to be automatically started at boot." msgstr "將區域設定為開機時自動啟動。" #: src/virsh.c:2783 src/virsh.c:3109 src/virsh.c:3149 src/virsh.c:3189 #: src/virsh.c:3229 src/virsh.c:3269 src/virsh.c:3454 src/virsh.c:3722 #: src/virsh.c:3858 src/virsh.c:3900 src/virsh.c:3952 src/virsh.c:3994 #: src/virsh.c:4138 src/virsh.c:5311 #, fuzzy msgid "pool name or uuid" msgstr "區域名稱或 uuid" #: src/virsh.c:2805 #, fuzzy, c-format msgid "failed to mark pool %s as autostarted" msgstr "無法%s將網路標記為%s自動啟動" #: src/virsh.c:2808 #, fuzzy, c-format msgid "failed to unmark pool %s as autostarted" msgstr "無法%s將網路標記為%s自動啟動" #: src/virsh.c:2815 #, fuzzy, c-format msgid "Pool %s marked as autostarted\n" msgstr "區域 %s %s已標記為自動啟動\n" #: src/virsh.c:2817 #, fuzzy, c-format msgid "Pool %s unmarked as autostarted\n" msgstr "區域 %s %s已標記為自動啟動\n" #: src/virsh.c:2827 #, fuzzy msgid "create a pool from an XML file" msgstr "從 XML 檔案建立區域" #: src/virsh.c:2828 src/virsh.c:2875 #, fuzzy msgid "Create a pool." msgstr "建立區域。" #: src/virsh.c:2833 src/virsh.c:2971 #, fuzzy msgid "file containing an XML pool description" msgstr "包含 XML 區域描述的檔案" #: src/virsh.c:2860 #, fuzzy, c-format msgid "Pool %s created from %s\n" msgstr "區域 %s 建立自 %s\n" #: src/virsh.c:2863 #, fuzzy, c-format msgid "Failed to create pool from %s" msgstr "無法從 %s 建立區域" #: src/virsh.c:2874 #, fuzzy msgid "create a pool from a set of args" msgstr "從 XML 檔案建立區域" #: src/virsh.c:2880 src/virsh.c:3019 #, fuzzy msgid "name of the pool" msgstr "非作用中區域的名稱" #: src/virsh.c:2881 src/virsh.c:3020 msgid "type of the pool" msgstr "" #: src/virsh.c:2882 src/virsh.c:3021 msgid "source-host for underlying storage" msgstr "" #: src/virsh.c:2883 src/virsh.c:3022 msgid "source path for underlying storage" msgstr "" #: src/virsh.c:2884 src/virsh.c:3023 msgid "source device for underlying storage" msgstr "" #: src/virsh.c:2885 src/virsh.c:3024 msgid "target for underlying storage" msgstr "" #: src/virsh.c:2937 src/virsh.c:3075 src/virsh.c:3687 #, fuzzy msgid "Failed to allocate XML buffer" msgstr "無法分配節點" #: src/virsh.c:2946 #, fuzzy, c-format msgid "Pool %s created\n" msgstr "區域 %s 建立自 %s\n" #: src/virsh.c:2950 #, fuzzy, c-format msgid "Failed to create pool %s" msgstr "無法從 %s 建立區域" #: src/virsh.c:2965 #, fuzzy msgid "define (but don't start) a pool from an XML file" msgstr "從 XML 檔案定義（但不啟動）區域" #: src/virsh.c:2966 src/virsh.c:3014 #, fuzzy msgid "Define a pool." msgstr "定義區域。" #: src/virsh.c:2998 #, fuzzy, c-format msgid "Pool %s defined from %s\n" msgstr "區域 %s 定義自 %s\n" #: src/virsh.c:3001 #, fuzzy, c-format msgid "Failed to define pool from %s" msgstr "無法從 %s 定義區域" #: src/virsh.c:3013 msgid "define a pool from a set of args" msgstr "" #: src/virsh.c:3084 #, fuzzy, c-format msgid "Pool %s defined\n" msgstr "區域 %s 定義自 %s\n" #: src/virsh.c:3088 #, fuzzy, c-format msgid "Failed to define pool %s" msgstr "無法為區域 %s 取消定義" #: src/virsh.c:3103 msgid "build a pool" msgstr "" #: src/virsh.c:3104 msgid "Build a given pool." msgstr "" #: src/virsh.c:3127 #, c-format msgid "Pool %s builded\n" msgstr "" #: src/virsh.c:3129 #, fuzzy, c-format msgid "Failed to build pool %s" msgstr "無法暫停區域 %s" #: src/virsh.c:3143 #, fuzzy msgid "destroy a pool" msgstr "刪除一個區域" #: src/virsh.c:3144 #, fuzzy msgid "Destroy a given pool." msgstr "刪除給定的區域。" #: src/virsh.c:3167 #, fuzzy, c-format msgid "Pool %s destroyed\n" msgstr "區域 %s 已經刪除\n" #: src/virsh.c:3169 #, fuzzy, c-format msgid "Failed to destroy pool %s" msgstr "無法刪除區域 %s" #: src/virsh.c:3183 msgid "delete a pool" msgstr "" #: src/virsh.c:3184 #, fuzzy msgid "Delete a given pool." msgstr "刪除給定的區域。" #: src/virsh.c:3207 #, fuzzy, c-format msgid "Pool %s deleted\n" msgstr "區域 %s 已經刪除\n" #: src/virsh.c:3209 #, fuzzy, c-format msgid "Failed to delete pool %s" msgstr "無法刪除區域 %s" #: src/virsh.c:3223 msgid "refresh a pool" msgstr "" #: src/virsh.c:3224 msgid "Refresh a given pool." msgstr "" #: src/virsh.c:3247 #, fuzzy, c-format msgid "Pool %s refreshed\n" msgstr "區域 %s 已經繼續執行\n" #: src/virsh.c:3249 #, fuzzy, c-format msgid "Failed to refresh pool %s" msgstr "無法繼續區域 %s" #: src/virsh.c:3263 #, fuzzy msgid "pool information in XML" msgstr "XML 格式的區域資訊" #: src/virsh.c:3264 #, fuzzy msgid "Output the pool information as an XML dump to stdout." msgstr "將區域資訊以 XML 格式輸出到螢幕上。" #: src/virsh.c:3304 #, fuzzy msgid "list pools" msgstr "列出區域" #: src/virsh.c:3305 #, fuzzy msgid "Returns list of pools." msgstr "傳回區域清單。" #: src/virsh.c:3310 #, fuzzy msgid "list inactive pools" msgstr "列出非作用中的區域" #: src/virsh.c:3311 #, fuzzy msgid "list inactive & active pools" msgstr "列出作用中與非作用中的區域" #: src/virsh.c:3331 src/virsh.c:3339 #, fuzzy msgid "Failed to list active pools" msgstr "無法列出運作中的區域" #: src/virsh.c:3350 src/virsh.c:3358 #, fuzzy msgid "Failed to list inactive pools" msgstr "無法列出非作用中的區域" #: src/virsh.c:3448 #, fuzzy msgid "storage pool information" msgstr "節點資訊" #: src/virsh.c:3449 #, fuzzy msgid "Returns basic information about the storage pool." msgstr "傳回節點的基本資訊。" #: src/virsh.c:3487 msgid "building" msgstr "" #: src/virsh.c:3491 src/virsh.c:6133 src/virsh.c:6159 msgid "running" msgstr "執行中" #: src/virsh.c:3495 msgid "degraded" msgstr "" #: src/virsh.c:3502 src/virsh.c:3928 msgid "Capacity:" msgstr "" #: src/virsh.c:3505 src/virsh.c:3931 #, fuzzy msgid "Allocation:" msgstr "分配區域" #: src/virsh.c:3508 msgid "Available:" msgstr "" #: src/virsh.c:3524 #, fuzzy msgid "convert a pool UUID to pool name" msgstr "將網路 id 或 UUID 轉為網路名稱" #: src/virsh.c:3529 #, fuzzy msgid "pool uuid" msgstr "區域的 uuid" #: src/virsh.c:3555 #, fuzzy msgid "start a (previously defined) inactive pool" msgstr "開啟（先前定義的）非作用中區域" #: src/virsh.c:3556 #, fuzzy msgid "Start a pool." msgstr "開啟一個區域。" #: src/virsh.c:3561 #, fuzzy msgid "name of the inactive pool" msgstr "非作用中區域的名稱" #: src/virsh.c:3578 #, fuzzy, c-format msgid "Pool %s started\n" msgstr "區域 %s 已開啟\n" #: src/virsh.c:3581 #, fuzzy, c-format msgid "Failed to start pool %s" msgstr "無法開啟區域 %s" #: src/virsh.c:3594 #, fuzzy msgid "create a volume from a set of args" msgstr "從 XML 檔案建立區域" #: src/virsh.c:3595 src/virsh.c:3794 #, fuzzy msgid "Create a vol." msgstr "建立區域。" #: src/virsh.c:3600 src/virsh.c:3760 src/virsh.c:3799 #, fuzzy msgid "pool name" msgstr "區域名稱" #: src/virsh.c:3601 #, fuzzy msgid "name of the volume" msgstr "非作用中區域的名稱" #: src/virsh.c:3602 msgid "size of the vol with optional k,M,G,T suffix" msgstr "" #: src/virsh.c:3603 msgid "initial allocation size with optional k,M,G,T suffix" msgstr "" #: src/virsh.c:3604 msgid "file format type raw,bochs,qcow,qcow2,vmdk" msgstr "" #: src/virsh.c:3662 src/virsh.c:3667 #, c-format msgid "Malformed size %s" msgstr "" #: src/virsh.c:3696 #, fuzzy, c-format msgid "Vol %s created\n" msgstr "區域 %s 建立自 %s\n" #: src/virsh.c:3700 #, fuzzy, c-format msgid "Failed to create vol %s" msgstr "無法讀取插槽 %d\n" #: src/virsh.c:3716 #, fuzzy msgid "undefine an inactive pool" msgstr "取消定義非作用中的區域" #: src/virsh.c:3717 #, fuzzy msgid "Undefine the configuration for an inactive pool." msgstr "為非作用中的區域取消定義。" #: src/virsh.c:3740 #, fuzzy, c-format msgid "Pool %s has been undefined\n" msgstr "區域 %s 已經取消定義\n" #: src/virsh.c:3742 #, fuzzy, c-format msgid "Failed to undefine pool %s" msgstr "無法為區域 %s 取消定義" #: src/virsh.c:3755 #, fuzzy msgid "convert a pool name to pool UUID" msgstr "將網路名稱轉為網路 UUID" #: src/virsh.c:3780 #, fuzzy msgid "failed to get pool UUID" msgstr "無法取得區域 UUID" #: src/virsh.c:3793 #, fuzzy msgid "create a vol from an XML file" msgstr "從 XML 檔案建立區域" #: src/virsh.c:3800 #, fuzzy msgid "file containing an XML vol description" msgstr "包含 XML 區域描述的檔案" #: src/virsh.c:3837 #, fuzzy, c-format msgid "Vol %s created from %s\n" msgstr "區域 %s 建立自 %s\n" #: src/virsh.c:3841 #, fuzzy, c-format msgid "Failed to create vol from %s" msgstr "無法從 %s 建立區域" #: src/virsh.c:3852 msgid "delete a vol" msgstr "" #: src/virsh.c:3853 #, fuzzy msgid "Delete a given vol." msgstr "刪除給定的區域。" #: src/virsh.c:3859 src/virsh.c:3901 src/virsh.c:3953 msgid "vol name, key or path" msgstr "" #: src/virsh.c:3878 #, fuzzy, c-format msgid "Vol %s deleted\n" msgstr "區域 %s 已經刪除\n" #: src/virsh.c:3880 #, fuzzy, c-format msgid "Failed to delete vol %s" msgstr "無法刪除區域 %s" #: src/virsh.c:3894 #, fuzzy msgid "storage vol information" msgstr "節點資訊" #: src/virsh.c:3895 #, fuzzy msgid "Returns basic information about the storage vol." msgstr "傳回節點的基本資訊。" #: src/virsh.c:3923 #, fuzzy msgid "Type:" msgstr "作業系統類型：" #: src/virsh.c:3925 msgid "file" msgstr "" #: src/virsh.c:3925 #, fuzzy msgid "block" msgstr "以組絕" #: src/virsh.c:3946 #, fuzzy msgid "vol information in XML" msgstr "XML 格式的區域資訊" #: src/virsh.c:3947 #, fuzzy msgid "Output the vol information as an XML dump to stdout." msgstr "將區域資訊以 XML 格式輸出到螢幕上。" #: src/virsh.c:3988 #, fuzzy msgid "list vols" msgstr "列出區域" #: src/virsh.c:3989 #, fuzzy msgid "Returns list of vols by pool." msgstr "傳回區域清單。" #: src/virsh.c:4014 src/virsh.c:4022 #, fuzzy msgid "Failed to list active vols" msgstr "無法列出運作中的區域" #: src/virsh.c:4030 msgid "Path" msgstr "" #: src/virsh.c:4067 #, fuzzy msgid "convert a vol UUID to vol name" msgstr "將網路 id 或 UUID 轉為網路名稱" #: src/virsh.c:4072 msgid "vol key or path" msgstr "" #: src/virsh.c:4100 #, fuzzy msgid "convert a vol UUID to vol key" msgstr "將網路 id 或 UUID 轉為網路名稱" #: src/virsh.c:4105 #, fuzzy msgid "vol uuid" msgstr "區域的 uuid" #: src/virsh.c:4133 #, fuzzy msgid "convert a vol UUID to vol path" msgstr "將網路 id 或 UUID 轉為網路名稱" #: src/virsh.c:4139 msgid "vol name or key" msgstr "" #: src/virsh.c:4170 msgid "show version" msgstr "顯示版本" #: src/virsh.c:4171 msgid "Display the system version information." msgstr "顯示系統版本的資訊。" #: src/virsh.c:4194 msgid "failed to get hypervisor type" msgstr "無法取得 hypervisor 類型" #: src/virsh.c:4203 #, c-format msgid "Compiled against library: libvir %d.%d.%d\n" msgstr "用此函式庫來編譯：libvir %d.%d.%d\n" #: src/virsh.c:4208 msgid "failed to get the library version" msgstr "無法取得函式庫的版本" #: src/virsh.c:4215 #, c-format msgid "Using library: libvir %d.%d.%d\n" msgstr "使用函式庫：libvir %d.%d.%d\n" #: src/virsh.c:4222 #, c-format msgid "Using API: %s %d.%d.%d\n" msgstr "使用 API：%s %d.%d.%d\n" #: src/virsh.c:4227 msgid "failed to get the hypervisor version" msgstr "無法取得 hypervisor 的版本" #: src/virsh.c:4232 #, c-format msgid "Cannot extract running %s hypervisor version\n" msgstr "無法解開執行中 %s hypervisor 的版本\n" #: src/virsh.c:4239 #, c-format msgid "Running hypervisor: %s %d.%d.%d\n" msgstr "執行 hypervisor：%s %d.%d.%d\n" #: src/virsh.c:4250 #, fuzzy msgid "print the hypervisor hostname" msgstr "無法取得 hypervisor 類型" #: src/virsh.c:4264 #, fuzzy msgid "failed to get hostname" msgstr "無法取得 hypervisor 類型" #: src/virsh.c:4279 #, fuzzy msgid "print the hypervisor canonical URI" msgstr "hypervisor 連線的 URI" #: src/virsh.c:4293 #, fuzzy msgid "failed to get URI" msgstr "無法取得區域 UUID" #: src/virsh.c:4308 msgid "vnc display" msgstr "vnc 顯示" #: src/virsh.c:4309 #, fuzzy msgid "Output the IP address and port number for the VNC display." msgstr "為 VNC 顯示模式輸出 IP 位址與連接埠號。" #: src/virsh.c:4384 msgid "tty console" msgstr "" #: src/virsh.c:4385 msgid "Output the device for the TTY console." msgstr "" #: src/virsh.c:4445 #, fuzzy msgid "attach device from an XML file" msgstr "從 XML 檔案建立區域" #: src/virsh.c:4446 #, fuzzy msgid "Attach device from an XML ." msgstr "從 XML 檔案建立區域" #: src/virsh.c:4452 src/virsh.c:4509 msgid "XML file" msgstr "" #: src/virsh.c:4473 msgid "attach-device: Missing option" msgstr "" #: src/virsh.c:4487 #, fuzzy, c-format msgid "Failed to attach device from %s" msgstr "無法從 %s 建立區域" #: src/virsh.c:4502 #, fuzzy msgid "detach device from an XML file" msgstr "從 XML 檔案建立區域" #: src/virsh.c:4503 #, fuzzy msgid "Detach device from an XML " msgstr "從 XML 檔案建立區域" #: src/virsh.c:4530 msgid "detach-device: Missing option" msgstr "" #: src/virsh.c:4544 #, fuzzy, c-format msgid "Failed to detach device from %s" msgstr "無法從 %s 建立區域" #: src/virsh.c:4559 #, fuzzy msgid "attach network interface" msgstr "網路名稱" #: src/virsh.c:4560 msgid "Attach new network interface." msgstr "" #: src/virsh.c:4566 src/virsh.c:4680 #, fuzzy msgid "network interface type" msgstr "網路名稱" #: src/virsh.c:4567 #, fuzzy msgid "source of network interface" msgstr "未定義的網路名稱" #: src/virsh.c:4568 #, fuzzy msgid "target network name" msgstr "網路名稱" #: src/virsh.c:4569 src/virsh.c:4681 #, fuzzy msgid "MAC address" msgstr "無效的參數，於 %s" #: src/virsh.c:4570 msgid "script used to bridge network interface" msgstr "" #: src/virsh.c:4602 #, c-format msgid "No support %s in command 'attach-interface'" msgstr "" #: src/virsh.c:4673 #, fuzzy msgid "detach network interface" msgstr "網路名稱" #: src/virsh.c:4674 msgid "Detach network interface." msgstr "" #: src/virsh.c:4719 src/virsh.c:4724 #, fuzzy msgid "Failed to get interface information" msgstr "無法取得節點資訊" #: src/virsh.c:4732 #, c-format msgid "No found interface whose type is %s" msgstr "" #: src/virsh.c:4754 #, c-format msgid "No found interface whose MAC address is %s" msgstr "" #: src/virsh.c:4760 src/virsh.c:5034 #, fuzzy msgid "Failed to allocate memory" msgstr "無法分配節點" #: src/virsh.c:4765 src/virsh.c:5039 #, fuzzy msgid "Failed to create XML" msgstr "無法讀取插槽 %d\n" #: src/virsh.c:4792 msgid "attach disk device" msgstr "" #: src/virsh.c:4793 msgid "Attach new disk device." msgstr "" #: src/virsh.c:4799 msgid "source of disk device" msgstr "" #: src/virsh.c:4800 src/virsh.c:4962 msgid "target of disk device" msgstr "" #: src/virsh.c:4801 msgid "driver of disk device" msgstr "" #: src/virsh.c:4802 msgid "subdriver of disk device" msgstr "" #: src/virsh.c:4803 msgid "target device type" msgstr "" #: src/virsh.c:4804 msgid "mode of device reading and writing" msgstr "" #: src/virsh.c:4835 src/virsh.c:4844 src/virsh.c:4851 #, c-format msgid "No support %s in command 'attach-disk'" msgstr "" #: src/virsh.c:4955 msgid "detach disk device" msgstr "" #: src/virsh.c:4956 msgid "Detach disk device." msgstr "" #: src/virsh.c:4997 src/virsh.c:5002 src/virsh.c:5009 #, fuzzy msgid "Failed to get disk information" msgstr "無法取得節點資訊" #: src/virsh.c:5028 #, c-format msgid "No found disk whose target is %s" msgstr "" #: src/virsh.c:5072 #, fuzzy, c-format msgid "malloc: failed to allocate temporary file name: %s" msgstr "無法分配節點" #: src/virsh.c:5083 #, fuzzy, c-format msgid "mkstemp: failed to create temporary file: %s" msgstr "無法寫入設定檔" #: src/virsh.c:5090 #, fuzzy, c-format msgid "write: %s: failed to write to temporary file: %s" msgstr "無法寫入設定檔" #: src/virsh.c:5099 #, fuzzy, c-format msgid "close: %s: failed to write or close temporary file: %s" msgstr "無法寫入設定檔" #: src/virsh.c:5129 #, c-format msgid "" "%s: $EDITOR environment variable contains shell meta or other unacceptable " "characters" msgstr "" #: src/virsh.c:5136 #, c-format msgid "" "%s: temporary filename contains shell meta or other unacceptable characters " "(is $TMPDIR wrong?)" msgstr "" #: src/virsh.c:5143 #, fuzzy, c-format msgid "asprintf: could not create editing command: %s" msgstr "無法建立非運作中的區域 %s\n" #: src/virsh.c:5151 #, fuzzy, c-format msgid "%s: edit command failed: %s" msgstr "區域名稱" #: src/virsh.c:5157 #, c-format msgid "%s: command exited with non-zero status" msgstr "" #: src/virsh.c:5172 #, fuzzy, c-format msgid "%s: failed to read temporary file: %s" msgstr "無法寫入設定檔" #: src/virsh.c:5184 #, fuzzy msgid "edit XML configuration for a domain" msgstr "為非作用中的區域取消定義。" #: src/virsh.c:5185 #, fuzzy msgid "Edit the XML configuration for a domain." msgstr "為非作用中的區域取消定義。" #: src/virsh.c:5235 #, c-format msgid "Domain %s XML configuration not changed.\n" msgstr "" #: src/virsh.c:5251 msgid "ERROR: the XML configuration was changed by another user" msgstr "" #: src/virsh.c:5261 #, fuzzy, c-format msgid "Domain %s XML configuration edited.\n" msgstr "無法讀取設定檔" #: src/virsh.c:5287 #, fuzzy msgid "edit XML configuration for a network" msgstr "為非作用中的網路取消定義。" #: src/virsh.c:5288 #, fuzzy msgid "Edit the XML configuration for a network." msgstr "為非作用中的網路取消定義。" #: src/virsh.c:5305 #, fuzzy msgid "edit XML configuration for a storage pool" msgstr "為非作用中的區域取消定義。" #: src/virsh.c:5306 #, fuzzy msgid "Edit the XML configuration for a storage pool." msgstr "為非作用中的區域取消定義。" #: src/virsh.c:5323 msgid "quit this interactive terminal" msgstr "離開這互動式的終端機" #: src/virsh.c:5497 #, c-format msgid "command '%s' requires <%s> option" msgstr "「%s」指令需要 <%s> 選項" #: src/virsh.c:5498 #, c-format msgid "command '%s' requires --%s option" msgstr "「%s」指令需要 --%s 選項" #: src/virsh.c:5525 #, c-format msgid "command '%s' doesn't exist" msgstr "「%s」指令不存在" #: src/virsh.c:5533 msgid " NAME\n" msgstr " 名稱\n" #: src/virsh.c:5537 #, fuzzy msgid "" "\n" " SYNOPSIS\n" msgstr "" "\n" " 選項\n" #: src/virsh.c:5544 msgid "" "\n" " DESCRIPTION\n" msgstr "" "\n" " 描述\n" #: src/virsh.c:5548 msgid "" "\n" " OPTIONS\n" msgstr "" "\n" " 選項\n" #: src/virsh.c:5555 #, c-format msgid "--%s " msgstr "--%s " #: src/virsh.c:5557 #, c-format msgid "--%s " msgstr "--%s " #: src/virsh.c:5701 msgid "undefined domain name or id" msgstr "未定義的區域名稱或 id" #: src/virsh.c:5733 #, c-format msgid "failed to get domain '%s'" msgstr "無法取得區域「%s」" #: src/virsh.c:5746 msgid "undefined network name" msgstr "未定義的網路名稱" #: src/virsh.c:5770 #, c-format msgid "failed to get network '%s'" msgstr "無法取得網路「%s」" #: src/virsh.c:5783 src/virsh.c:5829 #, fuzzy msgid "undefined pool name" msgstr "未定義的網路名稱" #: src/virsh.c:5807 #, fuzzy, c-format msgid "failed to get pool '%s'" msgstr "無法取得區域「%s」" #: src/virsh.c:5824 #, fuzzy msgid "undefined vol name" msgstr "未定義的網路名稱" #: src/virsh.c:5860 #, fuzzy, c-format msgid "failed to get vol '%s'" msgstr "無法取得區域「%s」" #: src/virsh.c:5891 #, c-format msgid "" "\n" "(Time: %.3f ms)\n" "\n" msgstr "" "\n" "（時間：%.3f 毫秒)\n" "\n" #: src/virsh.c:5965 msgid "missing \"" msgstr "找不到 \"" #: src/virsh.c:6026 #, c-format msgid "unexpected token (command name): '%s'" msgstr "無預期的 token（指令名稱）：「%s」" #: src/virsh.c:6031 #, c-format msgid "unknown command: '%s'" msgstr "未知的指令：「%s」" #: src/virsh.c:6038 #, c-format msgid "command '%s' doesn't support option --%s" msgstr "「%s」指令並不支援 --%s 選項" #: src/virsh.c:6053 #, c-format msgid "expected syntax: --%s <%s>" msgstr "語法：--%s <%s>" #: src/virsh.c:6056 msgid "number" msgstr "數量" #: src/virsh.c:6056 msgid "string" msgstr "字串" #: src/virsh.c:6062 #, c-format msgid "unexpected data '%s'" msgstr "無預期的資料「%s」" #: src/virsh.c:6084 msgid "OPTION" msgstr "選項" #: src/virsh.c:6084 msgid "DATA" msgstr "資料" #: src/virsh.c:6135 src/virsh.c:6157 msgid "blocked" msgstr "以組絕" #: src/virsh.c:6137 msgid "paused" msgstr "已暫停" #: src/virsh.c:6139 msgid "in shutdown" msgstr "關機中" #: src/virsh.c:6141 msgid "shut off" msgstr "關機" #: src/virsh.c:6143 msgid "crashed" msgstr "當機" #: src/virsh.c:6155 msgid "offline" msgstr "離線" #: src/virsh.c:6174 msgid "no valid connection" msgstr "沒有有效的連線" #: src/virsh.c:6221 #, c-format msgid "%s: error: " msgstr "%s：錯誤：" #: src/virsh.c:6223 msgid "error: " msgstr "錯誤：" #: src/virsh.c:6245 src/virsh.c:6257 src/virsh.c:6270 #, c-format msgid "%s: %d: failed to allocate %d bytes" msgstr "%s：%d：無法分配 %d 位元組" #: src/virsh.c:6284 #, c-format msgid "%s: %d: failed to allocate %lu bytes" msgstr "%s：%d：無法分配 %lu 位元組" #: src/virsh.c:6313 msgid "failed to connect to the hypervisor" msgstr "無法連上 hypervisor" #: src/virsh.c:6345 #, fuzzy msgid "failed to get the log file information" msgstr "無法取得節點資訊" #: src/virsh.c:6350 msgid "the log path is not a file" msgstr "" #: src/virsh.c:6357 msgid "failed to open the log file. check the log file path" msgstr "" #: src/virsh.c:6425 #, fuzzy msgid "failed to write the log file" msgstr "無法寫入設定檔" #: src/virsh.c:6440 #, fuzzy, c-format msgid "%s: failed to write log file: %s" msgstr "無法寫入設定檔" #: src/virsh.c:6617 #, fuzzy msgid "failed to disconnect from the hypervisor" msgstr "無法從 hypervisor 處斷線" #: src/virsh.c:6635 #, fuzzy, c-format msgid "" "\n" "%s [options] [commands]\n" "\n" " options:\n" " -c | --connect hypervisor connection URI\n" " -r | --readonly connect readonly\n" " -d | --debug debug level [0-5]\n" " -h | --help this help\n" " -q | --quiet quiet mode\n" " -t | --timing print timing information\n" " -l | --log output logging to file\n" " -v | --version program version\n" "\n" " commands (non interactive mode):\n" msgstr "" "\n" "%s [選項] [命令]\n" "\n" " 選項：\n" " -c | --connect hypervisor 連線的 URI\n" " -r | --readonly 用唯讀方式連線\n" " -d | --debug 偵錯等級 [0-5]\n" " -h | --help 本求助畫面\n" " -q | --quiet 安靜模式\n" " -t | --timing 列印時間訊息\n" " -v | --version 程式版本\n" "\n" " 命令（非互動式模式）：\n" #: src/virsh.c:6653 #, fuzzy msgid "" "\n" " (specify help for details about the command)\n" "\n" msgstr "" "\n" " （請使用 --help <指令> 以取得關於指令的詳細資料）\n" "\n" #: src/virsh.c:6749 #, c-format msgid "unsupported option '-%c'. See --help." msgstr "不支援的選項「-%c」。請參閱 --help。" #: src/virsh.c:6835 #, c-format msgid "" "Welcome to %s, the virtualization interactive terminal.\n" "\n" msgstr "" "歡迎使用 %s - 虛擬化的互動模式終端機。\n" "\n" #: src/virsh.c:6838 msgid "" "Type: 'help' for help with commands\n" " 'quit' to quit\n" "\n" msgstr "" "類型： 「help」以取得指令的求助畫面\n" " 「quit」離開\n" "\n" #: src/virterror.c:243 msgid "warning" msgstr "警告" #: src/virterror.c:246 msgid "error" msgstr "錯誤" #: src/virterror.c:381 msgid "No error message provided" msgstr "無法提供錯誤訊息" #: src/virterror.c:436 #, c-format msgid "internal error %s" msgstr "內部錯誤 %s" #: src/virterror.c:438 msgid "internal error" msgstr "內部錯誤" #: src/virterror.c:445 #, fuzzy msgid "this function is not supported by the hypervisor" msgstr "不支援 hypervisor" #: src/virterror.c:447 #, fuzzy, c-format msgid "this function is not supported by the hypervisor: %s" msgstr "不支援 hypervisor %s" #: src/virterror.c:451 msgid "could not connect to hypervisor" msgstr "無法連上 hypervisor" #: src/virterror.c:453 #, c-format msgid "could not connect to %s" msgstr "無法連上 %s" #: src/virterror.c:457 msgid "invalid connection pointer in" msgstr "無效的連線指標，於 " #: src/virterror.c:459 #, c-format msgid "invalid connection pointer in %s" msgstr "無效的連線指標，於 %s" #: src/virterror.c:463 msgid "invalid domain pointer in" msgstr "無效的區域指標，於 " #: src/virterror.c:465 #, c-format msgid "invalid domain pointer in %s" msgstr "無效的區域指標，於 %s" #: src/virterror.c:469 msgid "invalid argument in" msgstr "無效的參數，於 " #: src/virterror.c:471 #, c-format msgid "invalid argument in %s" msgstr "無效的參數，於 %s" #: src/virterror.c:475 #, c-format msgid "operation failed: %s" msgstr "操作失敗：%s" #: src/virterror.c:477 msgid "operation failed" msgstr "操作失敗" #: src/virterror.c:481 #, c-format msgid "GET operation failed: %s" msgstr "GET 操作失敗：%s" #: src/virterror.c:483 msgid "GET operation failed" msgstr "GET 操作失敗" #: src/virterror.c:487 #, c-format msgid "POST operation failed: %s" msgstr "POST 操作失敗：%s" #: src/virterror.c:489 msgid "POST operation failed" msgstr "POST 操作失敗" #: src/virterror.c:492 #, c-format msgid "got unknown HTTP error code %d" msgstr "收到未知的 HTTP 錯誤碼 %d" #: src/virterror.c:496 #, c-format msgid "unknown host %s" msgstr "未知的主機 %s" #: src/virterror.c:498 msgid "unknown host" msgstr "未知的主機" #: src/virterror.c:502 #, c-format msgid "failed to serialize S-Expr: %s" msgstr "無法為 S-Expr 製作序列號：%s" #: src/virterror.c:504 msgid "failed to serialize S-Expr" msgstr "無法為 S-Expr 製作序列號" #: src/virterror.c:508 msgid "could not use Xen hypervisor entry" msgstr "無法使用 Xen hypervisor 項目" #: src/virterror.c:510 #, c-format msgid "could not use Xen hypervisor entry %s" msgstr "無法使用 Xen hypervisor 項目 %s" #: src/virterror.c:514 msgid "could not connect to Xen Store" msgstr "無法連上 Xen Store" #: src/virterror.c:516 #, c-format msgid "could not connect to Xen Store %s" msgstr "無法連上 Xen Store %s" #: src/virterror.c:519 #, c-format msgid "failed Xen syscall %s %d" msgstr "Xen syscall %s %d 失敗" #: src/virterror.c:523 msgid "unknown OS type" msgstr "未知的作業系統類型" #: src/virterror.c:525 #, c-format msgid "unknown OS type %s" msgstr "未知的作業系統類型 %s" #: src/virterror.c:528 msgid "missing kernel information" msgstr "找不到核心資訊" #: src/virterror.c:532 msgid "missing root device information" msgstr "找不到 root 裝置的資訊" #: src/virterror.c:534 #, c-format msgid "missing root device information in %s" msgstr "找不到 root 裝置的資訊，於 %s" #: src/virterror.c:538 msgid "missing source information for device" msgstr "找不到裝置的來源資訊" #: src/virterror.c:540 #, c-format msgid "missing source information for device %s" msgstr "找不到裝置 %s 的來源資訊" #: src/virterror.c:544 msgid "missing target information for device" msgstr "找不到裝置的目標資訊" #: src/virterror.c:546 #, c-format msgid "missing target information for device %s" msgstr "找不到 %s 裝置的目標資訊" #: src/virterror.c:550 msgid "missing domain name information" msgstr "找不到區域名稱的資訊" #: src/virterror.c:552 #, c-format msgid "missing domain name information in %s" msgstr "找不到區域名稱的資訊，於 %s" #: src/virterror.c:556 msgid "missing operating system information" msgstr "找不到作業系統資訊" #: src/virterror.c:558 #, c-format msgid "missing operating system information for %s" msgstr "找不到 %s 的作業系統資訊" #: src/virterror.c:562 msgid "missing devices information" msgstr "找不到裝置的資訊" #: src/virterror.c:564 #, c-format msgid "missing devices information for %s" msgstr "找不到 %s 的裝置資訊" #: src/virterror.c:568 msgid "too many drivers registered" msgstr "註冊太多驅動程式" #: src/virterror.c:570 #, c-format msgid "too many drivers registered in %s" msgstr "在 %s 中註冊太多驅動程式" #: src/virterror.c:574 msgid "library call failed, possibly not supported" msgstr "呼叫函式庫失敗，可能並不支援" #: src/virterror.c:576 #, c-format msgid "library call %s failed, possibly not supported" msgstr "呼叫函式庫 %s 失敗，可能並不支援" #: src/virterror.c:580 msgid "XML description not well formed or invalid" msgstr "XML 的描述格式有誤" #: src/virterror.c:582 #, c-format msgid "XML description for %s is not well formed or invalid" msgstr "%s 的 XML 描述之格式有誤" #: src/virterror.c:586 msgid "this domain exists already" msgstr "這個區域已經存在" #: src/virterror.c:588 #, c-format msgid "domain %s exists already" msgstr "區域 %s 已經存在" #: src/virterror.c:592 msgid "operation forbidden for read only access" msgstr "唯讀時，禁止這操作" #: src/virterror.c:594 #, c-format msgid "operation %s forbidden for read only access" msgstr "唯讀時，禁止 %s 操作" #: src/virterror.c:598 msgid "failed to open configuration file for reading" msgstr "無法開啟要讀取的設定檔" #: src/virterror.c:600 #, c-format msgid "failed to open %s for reading" msgstr "無法開啟要讀取的 %s" #: src/virterror.c:604 msgid "failed to read configuration file" msgstr "無法讀取設定檔" #: src/virterror.c:606 #, c-format msgid "failed to read configuration file %s" msgstr "無法讀取設定檔 %s" #: src/virterror.c:610 msgid "failed to parse configuration file" msgstr "無法解析設定檔" #: src/virterror.c:612 #, c-format msgid "failed to parse configuration file %s" msgstr "無法解析設定檔 %s" #: src/virterror.c:616 msgid "configuration file syntax error" msgstr "設定檔語法錯誤" #: src/virterror.c:618 #, c-format msgid "configuration file syntax error: %s" msgstr "設定檔語法錯誤：%s" #: src/virterror.c:622 msgid "failed to write configuration file" msgstr "無法寫入設定檔" #: src/virterror.c:624 #, c-format msgid "failed to write configuration file: %s" msgstr "無法寫入設定檔：%s" #: src/virterror.c:628 msgid "parser error" msgstr "解析程式錯誤" #: src/virterror.c:634 msgid "invalid network pointer in" msgstr "無效的網路指標，於 " #: src/virterror.c:636 #, c-format msgid "invalid network pointer in %s" msgstr "無效的網路指標，於 %s" #: src/virterror.c:640 msgid "this network exists already" msgstr "這個網路已經存在" #: src/virterror.c:642 #, c-format msgid "network %s exists already" msgstr "網路 %s 已經存在" #: src/virterror.c:646 msgid "system call error" msgstr "系統呼叫錯誤" #: src/virterror.c:652 #, fuzzy msgid "RPC error" msgstr "錯誤" #: src/virterror.c:658 #, fuzzy msgid "GNUTLS call error" msgstr "系統呼叫錯誤" #: src/virterror.c:664 #, fuzzy msgid "Failed to find the network" msgstr "無法為網路 %s 取消定義" #: src/virterror.c:666 #, fuzzy, c-format msgid "Failed to find the network: %s" msgstr "無法為網路 %s 取消定義" #: src/virterror.c:670 #, fuzzy msgid "Domain not found" msgstr "區域資訊" #: src/virterror.c:672 #, fuzzy, c-format msgid "Domain not found: %s" msgstr "從 %s 回復區域\n" #: src/virterror.c:676 #, fuzzy msgid "Network not found" msgstr "網路名稱或 uuid" #: src/virterror.c:678 #, fuzzy, c-format msgid "Network not found: %s" msgstr "網路 %s 建立自 %s\n" #: src/virterror.c:682 #, fuzzy msgid "invalid MAC address" msgstr "無效的參數，於 %s" #: src/virterror.c:684 #, fuzzy, c-format msgid "invalid MAC address: %s" msgstr "無效的參數，於 %s" #: src/virterror.c:688 #, fuzzy msgid "authentication failed" msgstr "操作失敗" #: src/virterror.c:690 #, fuzzy, c-format msgid "authentication failed: %s" msgstr "操作失敗：%s" #: src/virterror.c:694 #, fuzzy msgid "Storage pool not found" msgstr "網路名稱或 uuid" #: src/virterror.c:696 #, fuzzy, c-format msgid "Storage pool not found: %s" msgstr "網路 %s 建立自 %s\n" #: src/virterror.c:700 #, fuzzy msgid "Storage volume not found" msgstr "網路名稱或 uuid" #: src/virterror.c:702 #, fuzzy, c-format msgid "Storage volume not found: %s" msgstr "網路 %s 建立自 %s\n" #: src/virterror.c:706 #, fuzzy msgid "invalid storage pool pointer in" msgstr "無效的網路指標，於 " #: src/virterror.c:708 #, fuzzy, c-format msgid "invalid storage pool pointer in %s" msgstr "無效的網路指標，於 %s" #: src/virterror.c:712 #, fuzzy msgid "invalid storage volume pointer in" msgstr "無效的網路指標，於 " #: src/virterror.c:714 #, fuzzy, c-format msgid "invalid storage volume pointer in %s" msgstr "無效的網路指標，於 %s" #: src/virterror.c:718 #, fuzzy msgid "Failed to find a storage driver" msgstr "無法為網路 %s 取消定義" #: src/virterror.c:720 #, fuzzy, c-format msgid "Failed to find a storage driver: %s" msgstr "無法為網路 %s 取消定義" #: src/xen_internal.c:1326 #, c-format msgid "Credit scheduler weight parameter (%d) is out of range (1-65535)" msgstr "" #: src/xen_internal.c:1336 #, c-format msgid "Credit scheduler cap parameter (%d) is out of range (0-65535)" msgstr "" #: src/xen_internal.c:2514 #, c-format msgid "allocating %d domain info" msgstr "分配 %d 區域資訊" #: src/xend_internal.c:186 #, fuzzy msgid "failed to create a socket" msgstr "無法分配節點" #: src/xend_internal.c:208 #, fuzzy msgid "failed to connect to xend" msgstr "無法連上 Xen Store" #: src/xend_internal.c:255 src/xend_internal.c:258 msgid "failed to read from Xen Daemon" msgstr "無法從 Xen 系統程式讀取" #: src/xend_internal.c:446 #, fuzzy, c-format msgid "xend_get: error from xen daemon: %s" msgstr "無法繼續區域 %s" #: src/xend_internal.c:496 src/xend_internal.c:499 src/xend_internal.c:507 #, c-format msgid "xend_post: error from xen daemon: %s" msgstr "" #: src/xend_internal.c:765 msgid "allocate new buffer" msgstr "分配新的緩衝區" #: src/xend_internal.c:898 #, fuzzy, c-format msgid "gethostbyname failed: %s" msgstr "操作失敗：%s" #: src/xend_internal.c:1019 msgid "failed to urlencode the create S-Expr" msgstr "無法 urlencode 以建立 S-Expr" #: src/xend_internal.c:1060 msgid "domain information incomplete, missing domid" msgstr "區域的資訊不全，沒有 domid" #: src/xend_internal.c:1066 msgid "domain information incorrect domid not numeric" msgstr "區域的資訊不正確，domid 並非數字型態" #: src/xend_internal.c:1071 src/xend_internal.c:1118 msgid "domain information incomplete, missing uuid" msgstr "區域的資訊不全，沒有 uuid" #: src/xend_internal.c:1110 src/xend_internal.c:2205 src/xend_internal.c:2212 msgid "domain information incomplete, missing name" msgstr "區域的資訊不全，沒有名稱" #: src/xend_internal.c:1199 #, fuzzy msgid "domain information incomplete, missing HVM loader" msgstr "區域的資訊不全，沒有名稱" #: src/xend_internal.c:1253 #, fuzzy msgid "domain information incomplete, missing kernel & bootloader" msgstr "區域的資訊不全，沒有核心" #: src/xend_internal.c:1317 #, fuzzy msgid "Unknown char device type" msgstr "未知的作業系統類型" #: src/xend_internal.c:1351 src/xend_internal.c:1391 src/xend_internal.c:1407 #: src/xend_internal.c:1546 src/xend_internal.c:1574 src/xend_internal.c:1590 msgid "malformed char device string" msgstr "" #: src/xend_internal.c:1474 msgid "no memory for char device config" msgstr "" #: src/xend_internal.c:1519 #, fuzzy, c-format msgid "unknown chr device type '%s'" msgstr "未知的作業系統類型" #: src/xend_internal.c:1681 msgid "domain information incomplete, vbd has no dev" msgstr "區域的資訊不全，vbd 沒有 dev" #: src/xend_internal.c:1692 msgid "domain information incomplete, vbd has no src" msgstr "區域的資訊不全，vbd 沒有 src" #: src/xend_internal.c:1701 msgid "cannot parse vbd filename, missing driver name" msgstr "無法解析 vbd 檔名，找不到驅動程式名稱" #: src/xend_internal.c:1716 msgid "cannot parse vbd filename, missing driver type" msgstr "無法解析 vbd 檔名，找不到驅動程式類型" #: src/xend_internal.c:1858 #, fuzzy, c-format msgid "malformed mac address '%s'" msgstr "無效的參數，於 %s" #: src/xend_internal.c:1935 #, fuzzy, c-format msgid "unexpected sound model %s" msgstr "無預期的 dict 節點" #: src/xend_internal.c:2110 #, fuzzy, c-format msgid "unknown graphics type '%s'" msgstr "未知的作業系統類型 %s" #: src/xend_internal.c:2192 msgid "domain information incomplete, missing id" msgstr "區域的資訊不全，沒有 id" #: src/xend_internal.c:2261 src/xend_internal.c:2271 src/xend_internal.c:2281 #, fuzzy, c-format msgid "unknown lifecycle type %s" msgstr "未知的作業系統類型 %s" #: src/xend_internal.c:2594 #, fuzzy msgid "failed to parse topology information" msgstr "無法解析 Xend 的區域資訊" #: src/xend_internal.c:2648 #, fuzzy msgid "topology syntax error" msgstr "設定檔語法錯誤" #: src/xend_internal.c:2712 msgid "failed to parse Xend domain information" msgstr "無法解析 Xend 的區域資訊" #: src/xend_internal.c:3194 msgid "xenDaemonDomainFetch failed to find this domain" msgstr "" #: src/xend_internal.c:3816 src/xend_internal.c:4292 src/xm_internal.c:1638 #, fuzzy msgid "failed to build sexpr" msgstr "無法暫停區域 %s" #: src/xend_internal.c:3918 #, fuzzy msgid "unsupported device type" msgstr "無預期的 mime 類型" #: src/xend_internal.c:4021 msgid "xenDaemonGetAutostart failed to find this domain" msgstr "" #: src/xend_internal.c:4062 msgid "xenDaemonSetAutostart failed to find this domain" msgstr "" #: src/xend_internal.c:4070 #, fuzzy msgid "unexpected value from on_xend_start" msgstr "無預期的數值節點" #: src/xend_internal.c:4081 #, fuzzy msgid "no memory" msgstr "節點的記憶體" #: src/xend_internal.c:4087 #, fuzzy msgid "sexpr2string failed" msgstr "操作失敗" #: src/xend_internal.c:4092 #, fuzzy msgid "Failed to redefine sexpr" msgstr "無法為區域 %s 取消定義" #: src/xend_internal.c:4097 msgid "on_xend_start not present in sexpr" msgstr "" #: src/xend_internal.c:4128 #, fuzzy, c-format msgid "gethostname failed: %s" msgstr "操作失敗：%s" #: src/xend_internal.c:4134 #, fuzzy, c-format msgid "failed to strdup hostname: %s" msgstr "無法取得 hypervisor 類型" #: src/xend_internal.c:4165 msgid "" "xenDaemonDomainMigrate: Xen does not support renaming domains during " "migration" msgstr "" #: src/xend_internal.c:4175 msgid "" "xenDaemonDomainMigrate: Xen does not support bandwidth limits during " "migration" msgstr "" #: src/xend_internal.c:4187 msgid "xenDaemonDomainMigrate: unsupported flag" msgstr "" #: src/xend_internal.c:4200 msgid "xenDaemonDomainMigrate: invalid URI" msgstr "" #: src/xend_internal.c:4205 msgid "xenDaemonDomainMigrate: only xenmigr:// migrations are supported by Xen" msgstr "" #: src/xend_internal.c:4212 msgid "xenDaemonDomainMigrate: a hostname must be specified in the URI" msgstr "" #: src/xend_internal.c:4219 src/xend_internal.c:4241 src/xend_internal.c:4249 #: src/xend_internal.c:4474 src/xend_internal.c:4481 src/xml.c:89 msgid "strdup failed" msgstr "" #: src/xend_internal.c:4232 msgid "xenDaemonDomainMigrate: invalid port number" msgstr "" #: src/xend_internal.c:4286 #, fuzzy msgid "failed to parse domain description" msgstr "無法解析 Xend 的區域資訊" #: src/xend_internal.c:4300 #, c-format msgid "Failed to create inactive domain %s\n" msgstr "無法建立非運作中的區域 %s\n" #: src/xend_internal.c:4456 src/xend_internal.c:4532 src/xend_internal.c:4622 msgid "unsupported in xendConfigVersion < 4" msgstr "" #: src/xend_internal.c:4468 #, fuzzy msgid "node information incomplete, missing scheduler name" msgstr "區域的資訊不全，沒有名稱" #: src/xend_internal.c:4486 src/xend_internal.c:4580 src/xend_internal.c:4692 #, fuzzy msgid "Unknown scheduler" msgstr "未知的主機" #: src/xend_internal.c:4545 src/xend_internal.c:4635 #, fuzzy msgid "Failed to get a scheduler name" msgstr "無法取得 hypervisor 類型" #: src/xend_internal.c:4558 src/xend_internal.c:4671 #, fuzzy msgid "domain information incomplete, missing cpu_weight" msgstr "區域的資訊不全，沒有 uuid" #: src/xend_internal.c:4563 src/xend_internal.c:4680 #, fuzzy msgid "domain information incomplete, missing cpu_cap" msgstr "區域的資訊不全，沒有 uuid" #: src/xend_internal.c:4739 msgid "domainBlockPeek is not supported for dom0" msgstr "" #: src/xend_internal.c:4762 #, fuzzy, c-format msgid "%s: invalid path" msgstr "無效的參數，於 %s" #: src/xend_internal.c:4770 #, fuzzy, c-format msgid "failed to open for reading: %s: %s" msgstr "無法開啟要讀取的 %s" #: src/xend_internal.c:4782 #, fuzzy, c-format msgid "failed to lseek or read from file: %s: %s" msgstr "無法暫停區域 %s" #: src/xend_internal.c:4865 src/xend_internal.c:4911 #, fuzzy, c-format msgid "unexpected graphics type %d" msgstr "無預期的 mime 類型" #: src/xend_internal.c:4954 #, fuzzy msgid "unexpected chr device type" msgstr "無預期的 mime 類型" #: src/xend_internal.c:5128 src/xm_internal.c:1800 #, fuzzy, c-format msgid "unsupported network type %d" msgstr "無預期的 mime 類型" #: src/xend_internal.c:5302 src/xend_internal.c:5309 src/xend_internal.c:5316 #, fuzzy, c-format msgid "unexpected lifecycle value %d" msgstr "無預期的數值節點" #: src/xend_internal.c:5333 #, fuzzy msgid "no HVM domain loader" msgstr "節點的區域清單" #: src/xend_internal.c:5544 #, fuzzy msgid "hotplug of device type not supported" msgstr "呼叫函式庫失敗，可能並不支援" #: src/xm_internal.c:194 src/xm_internal.c:225 src/xm_internal.c:230 #: src/xm_internal.c:253 #, fuzzy, c-format msgid "config value %s was malformed" msgstr "設定檔語法錯誤：%s" #: src/xm_internal.c:275 src/xm_internal.c:288 #, c-format msgid "config value %s was missing" msgstr "" #: src/xm_internal.c:281 #, c-format msgid "config value %s was not a string" msgstr "" #: src/xm_internal.c:509 msgid "xenXMConfigCacheRefresh: virHashAddEntry" msgstr "" #: src/xm_internal.c:747 #, fuzzy, c-format msgid "unexpected value %s for on_poweroff" msgstr "無預期的數值節點" #: src/xm_internal.c:755 #, fuzzy, c-format msgid "unexpected value %s for on_reboot" msgstr "無預期的數值節點" #: src/xm_internal.c:763 #, fuzzy, c-format msgid "unexpected value %s for on_crash" msgstr "無預期的數值節點" #: src/xm_internal.c:802 #, fuzzy msgid "unsupported guest type" msgstr "無預期的 mime 類型" #: src/xm_internal.c:1463 #, fuzzy msgid "read only connection" msgstr "唯讀的連線" #: src/xm_internal.c:1468 #, fuzzy msgid "not inactive domain" msgstr "列出非作用中的區域" #: src/xm_internal.c:1473 msgid "virHashLookup" msgstr "" #: src/xm_internal.c:1478 #, fuzzy msgid "can't retrieve config file for domain" msgstr "無法寫入設定檔：%s" #: src/xm_internal.c:1973 src/xm_internal.c:1982 src/xm_internal.c:1991 #, fuzzy, c-format msgid "unexpected lifecycle action %d" msgstr "無預期的 dict 節點" #: src/xm_internal.c:2269 msgid "can't retrieve config filename for domain to overwrite" msgstr "" #: src/xm_internal.c:2275 msgid "can't retrieve config entry for domain to overwrite" msgstr "" #: src/xm_internal.c:2286 src/xm_internal.c:2293 #, fuzzy msgid "failed to remove old domain from config map" msgstr "無法從 %s 回復區域" #: src/xm_internal.c:2302 msgid "config file name is too long" msgstr "" #: src/xm_internal.c:2314 msgid "config" msgstr "" #: src/xm_internal.c:2320 #, fuzzy msgid "unable to get current time" msgstr "區域目前的記憶體" #: src/xm_internal.c:2329 src/xm_internal.c:2336 #, fuzzy msgid "unable to store config file handle" msgstr "無法讀取設定檔 %s" #: src/xm_internal.c:2540 src/xm_internal.c:2660 #, fuzzy msgid "unknown device" msgstr "未知的作業系統類型" #: src/xml.c:76 msgid "Invalid parameter to virXPathString()" msgstr "" #: src/xml.c:117 src/xml.c:159 src/xml.c:214 msgid "Invalid parameter to virXPathNumber()" msgstr "" #: src/xml.c:272 msgid "Invalid parameter to virXPathBoolean()" msgstr "" #: src/xml.c:310 msgid "Invalid parameter to virXPathNode()" msgstr "" #: src/xml.c:352 msgid "Invalid parameter to virXPathNodeSet()" msgstr "" #: src/xml.c:372 src/xmlrpc.c:478 msgid "allocate string array" msgstr "分配字串陣列" #: src/xmlrpc.c:53 #, fuzzy msgid "allocate value" msgstr "分配數值陣列" #: src/xmlrpc.c:65 msgid "copying node content" msgstr "複製節點內容" #: src/xmlrpc.c:162 msgid "allocate value array" msgstr "分配數值陣列" #: src/xmlrpc.c:185 #, fuzzy msgid "allocate dict" msgstr "分配新的內文" #: src/xmlrpc.c:196 msgid "unexpected dict node" msgstr "無預期的 dict 節點" #: src/xmlrpc.c:267 msgid "unexpected value node" msgstr "無預期的數值節點" #: src/xmlrpc.c:427 msgid "send request" msgstr "發送要求" #: src/xmlrpc.c:433 msgid "unexpected mime type" msgstr "無預期的 mime 類型" #: src/xmlrpc.c:439 msgid "allocate response" msgstr "分配回應" #: src/xmlrpc.c:446 src/xmlrpc.c:508 msgid "read response" msgstr "讀取回應" #: src/xmlrpc.c:601 msgid "parse server response failed" msgstr "無法解析伺服器的回應" #: src/xmlrpc.c:662 msgid "allocate new context" msgstr "分配新的內文" #: src/xs_internal.c:319 msgid "failed to connect to Xen Store" msgstr "無法連上 Xen Store" #, fuzzy #~ msgid "Failed to generate UUID" #~ msgstr "無法讀取插槽 %d\n" #, fuzzy #~ msgid "Failed to Create Memory for 'ovz_ip' structure" #~ msgstr "無法分配節點" #, fuzzy #~ msgid "Failed to Create Memory for 'ovz_ns' structure" #~ msgstr "無法分配節點" #, fuzzy #~ msgid "no domain with matching name" #~ msgstr "區域 ID 或名稱" #, fuzzy #~ msgid "Invalid cdrom device name: %s" #~ msgstr "無效的區域指標，於 %s" #, fuzzy #~ msgid "Network name '%s' too long" #~ msgstr "網路名稱或 uuid" #, fuzzy #~ msgid "Model name '%s' is too long" #~ msgstr "網路名稱或 uuid" #, fuzzy #~ msgid "missing sound model" #~ msgstr "找不到裝置的來源資訊" #, fuzzy #~ msgid "invalid sound model '%s'" #~ msgstr "無效的區域指標，於 %s" #, fuzzy #~ msgid "domain name length too long" #~ msgstr "區域名稱或 uuid" #, fuzzy #~ msgid "malformed memory information" #~ msgstr "節點資訊" #, fuzzy #~ msgid "malformed vcpu information" #~ msgstr "區域 vcpu 的資訊" #, fuzzy #~ msgid "malformed vcpu mask information" #~ msgstr "區域 vcpu 的資訊" #, fuzzy #~ msgid "failed to allocate space for disk string" #~ msgstr "無法分配節點" #, fuzzy #~ msgid "failed to allocate space for net string" #~ msgstr "無法分配節點" #, fuzzy #~ msgid "failed to allocate space for input string" #~ msgstr "無法分配節點" #, fuzzy #~ msgid "failed to allocate space for sound dev" #~ msgstr "無法分配節點" #, fuzzy #~ msgid "failed to allocate space for vm string" #~ msgstr "無法分配節點" #, fuzzy #~ msgid "failed to allocate space for range string" #~ msgstr "無法分配節點" #, fuzzy #~ msgid "failed to allocate space for network_def string" #~ msgstr "無法分配節點" #, fuzzy #~ msgid "failed to allocate space for xmlXPathContext string" #~ msgstr "無法分配節點" #, fuzzy #~ msgid "network name length too long" #~ msgstr "網路名稱或 uuid" #, fuzzy #~ msgid "failed to allocate space for network string" #~ msgstr "無法分配節點" #, fuzzy #~ msgid "Failed to load network config '%s': out of memory" #~ msgstr "無法將網路加入至連線雜湊表" #, fuzzy #~ msgid "allocating cpu mask" #~ msgstr "分配區域" #, fuzzy #~ msgid "failed to generate XML: out of memory" #~ msgstr "無法讀取插槽 %d\n" #, fuzzy #~ msgid "Failed to bring down bridge '%s' : %s" #~ msgstr "無法暫停區域 %s" #, fuzzy #~ msgid "Failed to delete autostart link '%s': %s" #~ msgstr "無法將區域 %s 存至 %s" #~ msgid "domain" #~ msgstr "區域" #~ msgid "domain name" #~ msgstr "區域名稱" #~ msgid "domain uuid" #~ msgstr "區域的 uuid" #~ msgid "domain memory" #~ msgstr "區域的記憶體" #~ msgid "domain current memory" #~ msgstr "區域目前的記憶體" #~ msgid "domain vcpus" #~ msgstr "區域的 vcpus" #~ msgid "domain reboot behaviour" #~ msgstr "區域的重新啟動行為" #~ msgid "domain poweroff behaviour" #~ msgstr "區域的關機行為" #~ msgid "domain crash behaviour" #~ msgstr "區域的當機行為" #~ msgid "load domain definition file" #~ msgstr "載入區域定義檔" #, fuzzy #~ msgid "network" #~ msgstr "網路名稱" #, fuzzy #~ msgid "network forward" #~ msgstr "網路名稱" #, fuzzy #~ msgid "load network definition file" #~ msgstr "載入區域定義檔" #~ msgid "too many domains" #~ msgstr "過多區域" #, fuzzy #~ msgid "too many networks" #~ msgstr "過多連線" #, fuzzy #~ msgid "cannot read XML domain definition" #~ msgstr "載入區域定義檔" #, fuzzy #~ msgid "missing top level domain element" #~ msgstr "找不到 root 裝置的資訊" #, fuzzy #~ msgid "domain type is invalid" #~ msgstr "區域 %s 已經存在" #, fuzzy #~ msgid "cannot create XPath context" #~ msgstr "建立 xpath 的內文" #, fuzzy #~ msgid "unable to write config file" #~ msgstr "無法寫入設定檔" #, fuzzy #~ msgid "failed to allocate sound string" #~ msgstr "無法分配節點" #, fuzzy #~ msgid "Failed to find the sysfs path for %d:%d:%d:%d: %s" #~ msgstr "無法為網路 %s 取消定義" #, fuzzy #~ msgid "Failed to find SCSI device for %d:%d:%d:%d: %s" #~ msgstr "無法為網路 %s 取消定義" #, fuzzy #~ msgid "out of memory allocating return array" #~ msgstr "改變記憶體分配" #, fuzzy #~ msgid "cannot allocate address" #~ msgstr "分配回應" #, fuzzy #~ msgid "poll returned error: %s" #~ msgstr "內部錯誤 %s" #, fuzzy #~ msgid "cannot allocate memory for buffer" #~ msgstr "分配新的緩衝區" #, fuzzy #~ msgid "Failed to open '%s': read: %s" #~ msgstr "無法開啟要讀取的 %s" #~ msgid "growing buffer" #~ msgstr "增加中的緩衝區" #~ msgid "allocate buffer content" #~ msgstr "分配緩衝區內容" #~ msgid "file conatining an XML domain description" #~ msgstr "包含 XML 區域描述的檔案" #~ msgid "Xen Daemon or Xen Store" #~ msgstr "Xen Daemon 或 Xen Store" #~ msgid "file conatining an XML network description" #~ msgstr "包含 XML 網路描述的檔案"