# translation of ko.po to Korean # Copyright (C) 2006, 2007, 2009, 2010 Free Software Foundation, Inc. # This file is distributed under the same license as the libvirt package. # # Eunju Kim , 2006, 2007, 2009. # Hyunsok Oh , 2010. msgid "" msgstr "" "Project-Id-Version: ko\n" "Report-Msgid-Bugs-To: libvir-list@redhat.com\n" "POT-Creation-Date: 2012-08-31 20:38+0800\n" "PO-Revision-Date: 2010-04-22 14:04+1000\n" "Last-Translator: Hyunsok Oh \n" "Language-Team: Korean \n" "Language: ko\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #: daemon/libvirtd-config.c:56 daemon/libvirtd-config.c:78 #, c-format msgid "failed to allocate memory for %s config list" msgstr "%s 설정 목록에 대한 메모리 할당이 실패했습니다" #: daemon/libvirtd-config.c:64 daemon/libvirtd-config.c:98 #, c-format msgid "failed to allocate memory for %s config list value" msgstr "%s 설정 목록 값에 대한 메모리 할당이 실패했습니다" #: daemon/libvirtd-config.c:85 daemon/libvirtd-config.c:110 #, fuzzy, c-format msgid "remoteReadConfigFile: %s: %s: must be a string or list of strings" msgstr "" "remoteReadConfigFile: %s: %s: 스트링이거나 스트링의 리스트여야 합니다\n" #: daemon/libvirtd-config.c:127 #, fuzzy, c-format msgid "remoteReadConfigFile: %s: %s: invalid type: got %s; expected %s" msgstr "remoteReadConfigFile: %s: %s: 잘못된 타입: 실제 %s; 필요한 것 %s\n" #: daemon/libvirtd-config.c:189 #, c-format msgid "remoteReadConfigFile: %s: %s: unsupported auth %s" msgstr "remoteReadConfigFile: %s: %s: 지원하지 않는 auth %s" #: daemon/libvirtd.c:216 #, fuzzy, c-format msgid "%s: error: unable to determine if daemon is running: %s\n" msgstr "도메인 %s에 대한 장치를 거부할 수 없음" #: daemon/libvirtd.c:222 #, c-format msgid "" "%s: error: %s. Check /var/log/messages or run without --daemon for more " "info.\n" msgstr "" #: daemon/libvirtd.c:462 daemon/libvirtd.c:467 #, c-format msgid "Failed to parse mode '%s'" msgstr "모드 '%s'의 구문분석에 실패했습니다" #: daemon/libvirtd.c:709 msgid "additional privileges are required" msgstr "추가적인 권한이 필요합니다" #: daemon/libvirtd.c:715 msgid "failed to set reduced privileges" msgstr "권한을 축소하는 데 실패했습니다" #: daemon/libvirtd.c:766 #, fuzzy msgid "Driver state initialization failed" msgstr "인증이 실패했습니다" #: daemon/libvirtd.c:848 #, fuzzy, c-format msgid "Unable to migrate %s to %s" msgstr "위치 %lld로 %s에서 이동할 수 없음" #: daemon/libvirtd.c:870 #, c-format msgid "" "\n" "Usage:\n" " %s [options]\n" "\n" "Options:\n" " -v | --verbose Verbose messages.\n" " -d | --daemon Run as a daemon & write PID file.\n" " -l | --listen Listen for TCP/IP connections.\n" " -t | --timeout Exit after timeout period.\n" " -f | --config Configuration file.\n" " | --version Display version information.\n" " -p | --pid-file Change name of PID file.\n" "\n" "libvirt management daemon:\n" msgstr "" #: daemon/libvirtd.c:887 #, c-format msgid "" "\n" " Default paths:\n" "\n" " Configuration file (unless overridden by -f):\n" " %s/libvirt/libvirtd.conf\n" "\n" " Sockets:\n" " %s/run/libvirt/libvirt-sock\n" " %s/run/libvirt/libvirt-sock-ro\n" "\n" " TLS:\n" " CA certificate: %s/pki/CA/caert.pem\n" " Server certificate: %s/pki/libvirt/servercert.pem\n" " Server private key: %s/pki/libvirt/private/serverkey.pem\n" "\n" " PID file (unless overridden by -p):\n" " %s/run/libvirtd.pid\n" "\n" msgstr "" #: daemon/libvirtd.c:914 msgid "" "\n" " Default paths:\n" "\n" " Configuration file (unless overridden by -f):\n" " $XDG_CONFIG_HOME/libvirt/libvirtd.conf\n" "\n" " Sockets:\n" " $XDG_RUNTIME_DIR/libvirt/libvirt-sock (in UNIX abstract namespace)\n" "\n" " TLS:\n" " CA certificate: $HOME/.pki/libvirt/cacert.pem\n" " Server certificate: $HOME/.pki/libvirt/servercert.pem\n" " Server private key: $HOME/.pki/libvirt/serverkey.pem\n" "\n" " PID file:\n" " $XDG_RUNTIME_DIR/libvirt/libvirtd.pid\n" "\n" msgstr "" #: daemon/libvirtd.c:974 daemon/libvirtd.c:991 src/lxc/lxc_controller.c:1495 #: src/security/virt-aa-helper.c:1181 src/storage/parthelper.c:75 #: src/util/iohelper.c:228 src/util/iohelper.c:234 #, fuzzy, c-format msgid "%s: initialization failed\n" msgstr "인증이 실패했습니다" #: daemon/libvirtd.c:985 #, fuzzy, c-format msgid "%s: cannot identify driver directory\n" msgstr "작업 디렉터리를 얻을 수 없음" #: daemon/libvirtd.c:995 #, fuzzy, c-format msgid "%s: expected driver directory '%s' is missing\n" msgstr "설정 값 %s가 빠졌습니다" #: daemon/libvirtd.c:1037 #, fuzzy msgid "Invalid value for timeout" msgstr "잘못된 웨이트 값" #: daemon/libvirtd.c:1045 daemon/libvirtd.c:1053 #, fuzzy msgid "Can't allocate memory" msgstr "메모리 할당 실패" #: daemon/libvirtd.c:1067 #, fuzzy, c-format msgid "%s: internal error: unknown flag: %c" msgstr "내부 오류 %s" #: daemon/libvirtd.c:1080 #, fuzzy msgid "Can't create initial configuration" msgstr "초기 설정 생성 오류" #: daemon/libvirtd.c:1089 #, fuzzy msgid "Can't determine config path" msgstr "도메인 설정 없음" #: daemon/libvirtd.c:1099 #, fuzzy, c-format msgid "Can't load config file: %s: %s" msgstr "설정 파일 '%s'에 저장할 수 없음" #: daemon/libvirtd.c:1102 #, fuzzy, c-format msgid "Can't load config file: %s" msgstr "설정 파일 '%s'에 저장할 수 없음" #: daemon/libvirtd.c:1108 #, fuzzy msgid "Exiting due to failure to migrate profile" msgstr "로그파일 %s를 생성하는 데 실패" #: daemon/libvirtd.c:1114 #, fuzzy, c-format msgid "invalid host UUID: %s" msgstr "잘못된 경로: %s" #: daemon/libvirtd.c:1119 #, fuzzy msgid "Can't initialize logging" msgstr "inotify를 초기화할 수 없음" #: daemon/libvirtd.c:1126 #, fuzzy msgid "Can't determine pid file path." msgstr "기본 비디오 유형을 결정할 수 없음" #: daemon/libvirtd.c:1135 msgid "Can't determine socket paths" msgstr "" #: daemon/libvirtd.c:1145 #, c-format msgid "cannot change to root directory: %s" msgstr "루트 디렉터리로 cd하기 실패: %s" #: daemon/libvirtd.c:1151 #, c-format msgid "Failed to fork as daemon: %s" msgstr "데몬으로 fork하는 데 실패했습니다: %s" #: daemon/libvirtd.c:1164 #, fuzzy msgid "Can't determine user directory" msgstr "디렉터리 %s를 열 수 없음" #: daemon/libvirtd.c:1180 #, c-format msgid "unable to create rundir %s: %s" msgstr "rundir %s를 생성할 수 없습니다: %s" #: daemon/qemu_dispatch.h:38 daemon/qemu_dispatch.h:107 daemon/remote.c:772 #: daemon/remote.c:981 daemon/remote.c:1035 daemon/remote.c:1090 #: daemon/remote.c:1146 daemon/remote.c:1210 daemon/remote.c:1267 #: daemon/remote.c:1332 daemon/remote.c:1385 daemon/remote.c:1434 #: daemon/remote.c:1495 daemon/remote.c:1541 daemon/remote.c:1608 #: daemon/remote.c:1648 daemon/remote.c:1703 daemon/remote.c:1789 #: daemon/remote.c:1846 daemon/remote.c:1897 daemon/remote.c:1962 #: daemon/remote.c:2027 daemon/remote.c:2093 daemon/remote.c:2171 #: daemon/remote.c:2246 daemon/remote.c:2288 daemon/remote.c:3065 #: daemon/remote.c:3118 daemon/remote.c:3159 daemon/remote.c:3237 #: daemon/remote.c:3274 daemon/remote.c:3307 daemon/remote.c:3356 #: daemon/remote.c:3402 daemon/remote.c:3443 daemon/remote.c:3494 #: daemon/remote.c:3554 daemon/remote.c:3608 daemon/remote.c:3657 #: daemon/remote.c:3705 daemon/remote.c:3745 daemon/remote.c:3790 #: daemon/remote.c:3854 daemon/remote.c:3929 daemon/remote.c:3992 #: daemon/remote.c:4053 daemon/remote_dispatch.h:185 #: daemon/remote_dispatch.h:235 daemon/remote_dispatch.h:283 #: daemon/remote_dispatch.h:335 daemon/remote_dispatch.h:387 #: daemon/remote_dispatch.h:439 daemon/remote_dispatch.h:492 #: daemon/remote_dispatch.h:569 daemon/remote_dispatch.h:625 #: daemon/remote_dispatch.h:681 daemon/remote_dispatch.h:736 #: daemon/remote_dispatch.h:815 daemon/remote_dispatch.h:867 #: daemon/remote_dispatch.h:921 daemon/remote_dispatch.h:976 #: daemon/remote_dispatch.h:1028 daemon/remote_dispatch.h:1078 #: daemon/remote_dispatch.h:1130 daemon/remote_dispatch.h:1182 #: daemon/remote_dispatch.h:1234 daemon/remote_dispatch.h:1373 #: daemon/remote_dispatch.h:1451 daemon/remote_dispatch.h:1553 #: daemon/remote_dispatch.h:1677 daemon/remote_dispatch.h:1733 #: daemon/remote_dispatch.h:1815 daemon/remote_dispatch.h:1882 #: daemon/remote_dispatch.h:1938 daemon/remote_dispatch.h:2017 #: daemon/remote_dispatch.h:2097 daemon/remote_dispatch.h:2329 #: daemon/remote_dispatch.h:2385 daemon/remote_dispatch.h:2441 #: daemon/remote_dispatch.h:2497 daemon/remote_dispatch.h:2550 #: daemon/remote_dispatch.h:2605 daemon/remote_dispatch.h:2668 #: daemon/remote_dispatch.h:2724 daemon/remote_dispatch.h:2780 #: daemon/remote_dispatch.h:2857 daemon/remote_dispatch.h:2909 #: daemon/remote_dispatch.h:2961 daemon/remote_dispatch.h:3011 #: daemon/remote_dispatch.h:3063 daemon/remote_dispatch.h:3205 #: daemon/remote_dispatch.h:3260 daemon/remote_dispatch.h:3337 #: daemon/remote_dispatch.h:3393 daemon/remote_dispatch.h:3543 #: daemon/remote_dispatch.h:3620 daemon/remote_dispatch.h:3692 #: daemon/remote_dispatch.h:3745 daemon/remote_dispatch.h:3802 #: daemon/remote_dispatch.h:3914 daemon/remote_dispatch.h:3966 #: daemon/remote_dispatch.h:4018 daemon/remote_dispatch.h:4070 #: daemon/remote_dispatch.h:4122 daemon/remote_dispatch.h:4174 #: daemon/remote_dispatch.h:4225 daemon/remote_dispatch.h:4272 #: daemon/remote_dispatch.h:4321 daemon/remote_dispatch.h:4374 #: daemon/remote_dispatch.h:4431 daemon/remote_dispatch.h:4484 #: daemon/remote_dispatch.h:4537 daemon/remote_dispatch.h:4586 #: daemon/remote_dispatch.h:4640 daemon/remote_dispatch.h:4722 #: daemon/remote_dispatch.h:4774 daemon/remote_dispatch.h:4828 #: daemon/remote_dispatch.h:4890 daemon/remote_dispatch.h:4952 #: daemon/remote_dispatch.h:5013 daemon/remote_dispatch.h:5068 #: daemon/remote_dispatch.h:5123 daemon/remote_dispatch.h:5179 #: daemon/remote_dispatch.h:5242 daemon/remote_dispatch.h:5300 #: daemon/remote_dispatch.h:5362 daemon/remote_dispatch.h:5424 #: daemon/remote_dispatch.h:5484 daemon/remote_dispatch.h:5536 #: daemon/remote_dispatch.h:5588 daemon/remote_dispatch.h:5640 #: daemon/remote_dispatch.h:5695 daemon/remote_dispatch.h:5753 #: daemon/remote_dispatch.h:5809 daemon/remote_dispatch.h:5870 #: daemon/remote_dispatch.h:5934 daemon/remote_dispatch.h:5996 #: daemon/remote_dispatch.h:6058 daemon/remote_dispatch.h:6142 #: daemon/remote_dispatch.h:6217 daemon/remote_dispatch.h:6287 #: daemon/remote_dispatch.h:6345 daemon/remote_dispatch.h:6402 #: daemon/remote_dispatch.h:6460 daemon/remote_dispatch.h:6512 #: daemon/remote_dispatch.h:6564 daemon/remote_dispatch.h:6616 #: daemon/remote_dispatch.h:6670 daemon/remote_dispatch.h:6720 #: daemon/remote_dispatch.h:6771 daemon/remote_dispatch.h:6821 #: daemon/remote_dispatch.h:6869 daemon/remote_dispatch.h:6917 #: daemon/remote_dispatch.h:6968 daemon/remote_dispatch.h:7020 #: daemon/remote_dispatch.h:7068 daemon/remote_dispatch.h:7121 #: daemon/remote_dispatch.h:7169 daemon/remote_dispatch.h:7216 #: daemon/remote_dispatch.h:7262 daemon/remote_dispatch.h:7308 #: daemon/remote_dispatch.h:7355 daemon/remote_dispatch.h:7409 #: daemon/remote_dispatch.h:7459 daemon/remote_dispatch.h:7514 #: daemon/remote_dispatch.h:7570 daemon/remote_dispatch.h:7625 #: daemon/remote_dispatch.h:7677 daemon/remote_dispatch.h:7727 #: daemon/remote_dispatch.h:7779 daemon/remote_dispatch.h:7829 #: daemon/remote_dispatch.h:7893 daemon/remote_dispatch.h:7957 #: daemon/remote_dispatch.h:8021 daemon/remote_dispatch.h:8085 #: daemon/remote_dispatch.h:8149 daemon/remote_dispatch.h:8213 #: daemon/remote_dispatch.h:8277 daemon/remote_dispatch.h:8341 #: daemon/remote_dispatch.h:8405 daemon/remote_dispatch.h:8467 #: daemon/remote_dispatch.h:8521 daemon/remote_dispatch.h:8573 #: daemon/remote_dispatch.h:8623 daemon/remote_dispatch.h:8678 #: daemon/remote_dispatch.h:8734 daemon/remote_dispatch.h:8790 #: daemon/remote_dispatch.h:8846 daemon/remote_dispatch.h:8902 #: daemon/remote_dispatch.h:8957 daemon/remote_dispatch.h:9009 #: daemon/remote_dispatch.h:9059 daemon/remote_dispatch.h:9111 #: daemon/remote_dispatch.h:9165 daemon/remote_dispatch.h:9215 #: daemon/remote_dispatch.h:9267 daemon/remote_dispatch.h:9344 #: daemon/remote_dispatch.h:9400 daemon/remote_dispatch.h:9469 #: daemon/remote_dispatch.h:9522 daemon/remote_dispatch.h:9575 #: daemon/remote_dispatch.h:9627 daemon/remote_dispatch.h:9681 #: daemon/remote_dispatch.h:9765 daemon/remote_dispatch.h:9813 #: daemon/remote_dispatch.h:9914 daemon/remote_dispatch.h:9981 #: daemon/remote_dispatch.h:10030 daemon/remote_dispatch.h:10077 #: daemon/remote_dispatch.h:10125 daemon/remote_dispatch.h:10173 #: daemon/remote_dispatch.h:10221 daemon/remote_dispatch.h:10269 #: daemon/remote_dispatch.h:10317 daemon/remote_dispatch.h:10365 #: daemon/remote_dispatch.h:10413 daemon/remote_dispatch.h:10461 #: daemon/remote_dispatch.h:10509 daemon/remote_dispatch.h:10559 #: daemon/remote_dispatch.h:10612 daemon/remote_dispatch.h:10667 #: daemon/remote_dispatch.h:10719 daemon/remote_dispatch.h:10769 #: daemon/remote_dispatch.h:10844 daemon/remote_dispatch.h:10919 #: daemon/remote_dispatch.h:10974 daemon/remote_dispatch.h:11026 #: daemon/remote_dispatch.h:11076 daemon/remote_dispatch.h:11128 #: daemon/remote_dispatch.h:11180 daemon/remote_dispatch.h:11232 #: daemon/remote_dispatch.h:11286 daemon/remote_dispatch.h:11338 #: daemon/remote_dispatch.h:11388 daemon/remote_dispatch.h:11440 #: daemon/remote_dispatch.h:11495 daemon/remote_dispatch.h:11551 #: daemon/remote_dispatch.h:11610 daemon/remote_dispatch.h:11666 #: daemon/remote_dispatch.h:11722 daemon/remote_dispatch.h:11778 #: daemon/remote_dispatch.h:11847 daemon/remote_dispatch.h:11899 #: daemon/remote_dispatch.h:11952 daemon/remote_dispatch.h:12010 #: daemon/remote_dispatch.h:12063 daemon/remote_dispatch.h:12115 #: daemon/remote_dispatch.h:12167 daemon/remote_dispatch.h:12222 #: daemon/remote_dispatch.h:12281 daemon/remote_dispatch.h:12341 #: daemon/remote_dispatch.h:12395 daemon/remote_dispatch.h:12466 #: daemon/remote_dispatch.h:12524 daemon/remote_dispatch.h:12580 #: daemon/remote_dispatch.h:12635 daemon/remote_dispatch.h:12688 #: daemon/remote_dispatch.h:12745 daemon/remote_dispatch.h:12795 #: daemon/remote_dispatch.h:12849 daemon/remote_dispatch.h:12917 #: daemon/remote_dispatch.h:12969 msgid "connection not open" msgstr "연결이 열려있지 않습니다" #: daemon/remote.c:60 src/remote/remote_driver.c:58 #, fuzzy, c-format msgid "conversion from hyper to %s overflowed" msgstr "sexpr2string 실패" #: daemon/remote.c:708 msgid "connection already open" msgstr "연결이 이미 열려있습니다" #: daemon/remote.c:714 msgid "keepalive support is required to connect" msgstr "" #: daemon/remote.c:859 daemon/remote.c:949 src/remote/remote_driver.c:1481 #: src/remote/remote_driver.c:1560 #, fuzzy, c-format msgid "unknown parameter type: %d" msgstr "알려지지 않은 매개변수 유형" #: daemon/remote.c:895 daemon/remote.c:986 daemon/remote.c:1095 #: daemon/remote.c:1276 daemon/remote.c:1904 daemon/remote.c:1969 #: daemon/remote.c:2034 daemon/remote.c:2100 daemon/remote.c:2178 #: daemon/remote.c:2293 daemon/remote.c:3797 daemon/remote.c:3859 msgid "nparams too large" msgstr "nparams가 너무 큽니다" #: daemon/remote.c:910 src/remote/remote_driver.c:1521 #, c-format msgid "Parameter %s too big for destination" msgstr "매겨변수 %s가 목적지에 대해 너무 큼" #: daemon/remote.c:1152 msgid "maxStats > REMOTE_DOMAIN_MEMORY_STATS_MAX" msgstr "maxStats > REMOTE_DOMAIN_MEMORY_STATS_MAX" #: daemon/remote.c:1223 daemon/remote.c:1344 msgid "size > maximum buffer size" msgstr "크기 > 최대 버퍼 크기 " #: daemon/remote.c:1462 #, fuzzy msgid "failed to copy security label" msgstr "보안 레이블을 얻는 데 실패" #: daemon/remote.c:1549 #, fuzzy msgid "ncpumaps > REMOTE_VCPUINFO_MAX" msgstr "maxinfo > REMOTE_VCPUINFO_MAX" #: daemon/remote.c:1555 daemon/remote.c:1717 msgid "maxinfo * maplen > REMOTE_CPUMAPS_MAX" msgstr "maxinfo * maplen > REMOTE_CPUMAPS_MAX" #: daemon/remote.c:1711 msgid "maxinfo > REMOTE_VCPUINFO_MAX" msgstr "maxinfo > REMOTE_VCPUINFO_MAX" #: daemon/remote.c:2428 msgid "client tried invalid SASL init request" msgstr "클라이언트가 잘못된 SASL 초기화 요청을 시도했습니다" #: daemon/remote.c:2474 daemon/remote.c:2625 daemon/remote.c:2723 #: daemon/remote.c:2739 daemon/remote.c:2753 daemon/remote.c:2767 #: daemon/remote.c:2864 daemon/remote.c:3010 daemon/remote.c:3039 #: src/util/virterror.c:959 msgid "authentication failed" msgstr "인증이 실패했습니다" #: daemon/remote.c:2501 #, c-format msgid "negotiated SSF %d was not strong enough" msgstr "협상된 SSF %d가 충분히 강력하지 않습니다" #: daemon/remote.c:2556 daemon/remote.c:2654 msgid "client tried invalid SASL start request" msgstr "클라이언트가 잘못된 SASL 시작 요청을 시도했습니다" #: daemon/remote.c:2574 #, c-format msgid "sasl start reply data too long %d" msgstr "sasl start의 응답 데이터가 너무 깁니다 %d" #: daemon/remote.c:2671 #, c-format msgid "sasl step reply data too long %d" msgstr "sasl step 응답 데이터가 너무 깁니다 %d" #: daemon/remote.c:2806 daemon/remote.c:2915 msgid "client tried invalid PolicyKit init request" msgstr "클라이언트가 지원하지 않는 PolicyKit 초기화 요청을 시도했습니다" #: daemon/remote.c:2834 #, fuzzy, c-format msgid "Policy kit denied action %s from pid %lld, uid %d: %s" msgstr "Policy kit가 동작 %s를 pid %d, uid %d에 대해서 거부했습니다. 결과: %s" #: daemon/remote.c:2861 #, fuzzy msgid "authentication cancelled by user" msgstr "인증이 실패했습니다: %s" #: daemon/remote.c:2921 msgid "cannot get peer socket identity" msgstr "피어 소켓 식별자를 얻을 수 없습니다" #: daemon/remote.c:2939 #, c-format msgid "Failed to lookup policy kit caller: %s" msgstr "policy kit 호출자를 검색하는 데 실패했습니다: %s" #: daemon/remote.c:2946 #, c-format msgid "Failed to create polkit action %s" msgstr "polkit 동작 %s을 생성하는 데 실패했습니다" #: daemon/remote.c:2956 #, c-format msgid "Failed to create polkit context %s" msgstr "polkit 문맥 %s를 생성하는 데 실패했습니다" #: daemon/remote.c:2974 #, c-format msgid "Policy kit failed to check authorization %d %s" msgstr "Policy kit가 권한을 검사하는데 실패했습니다 %d %s" #: daemon/remote.c:2988 #, fuzzy, c-format msgid "Policy kit denied action %s from pid %lld, uid %d, result: %s" msgstr "Policy kit가 동작 %s를 pid %d, uid %d에 대해서 거부했습니다. 결과: %s" #: daemon/remote.c:3037 msgid "client tried unsupported PolicyKit init request" msgstr "클라이언트가 지원되지 않는 PolicyKit 초기화 요청을 시도했습니다" #: daemon/remote.c:3125 daemon/remote.c:3320 #, fuzzy, c-format msgid "domain event %d already registered" msgstr "타겟 %s:%d가 이미 존재합니다" #: daemon/remote.c:3166 daemon/remote.c:3370 #, fuzzy, c-format msgid "domain event %d not registered" msgstr "과도한 드라이버가 등록됨" #: daemon/remote.c:3315 daemon/remote.c:3364 #, fuzzy, c-format msgid "unsupported event ID %d" msgstr "지원되지 않는 입력 버스 %s " #: daemon/remote.c:3863 #, fuzzy msgid "ncpus too large" msgstr "nparams가 너무 큽니다" #: daemon/remote.c:3938 #, fuzzy msgid "maxerrors too large" msgstr "nparams가 너무 큽니다" #: daemon/remote_dispatch.h:6148 daemon/remote_dispatch.h:6223 #, fuzzy msgid "maxnames > REMOTE_DOMAIN_SNAPSHOT_LIST_NAMES_MAX" msgstr "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" #: daemon/remote_dispatch.h:7835 msgid "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" msgstr "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" #: daemon/remote_dispatch.h:7899 msgid "maxnames > REMOTE_DEFINED_INTERFACE_NAME_LIST_MAX" msgstr "maxnames > REMOTE_DEFINED_INTERFACE_NAME_LIST_MAX" #: daemon/remote_dispatch.h:7963 daemon/remote_dispatch.h:8219 msgid "maxnames > REMOTE_NETWORK_NAME_LIST_MAX" msgstr "maxnames > REMOTE_NETWORK_NAME_LIST_MAX" #: daemon/remote_dispatch.h:8027 daemon/remote_dispatch.h:8411 msgid "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX" msgstr "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX" #: daemon/remote_dispatch.h:8091 msgid "maxids > REMOTE_DOMAIN_ID_LIST_MAX" msgstr "maxids > REMOTE_DOMAIN_ID_LIST_MAX" #: daemon/remote_dispatch.h:8155 msgid "maxnames > REMOTE_INTERFACE_NAME_LIST_MAX" msgstr "maxnames > REMOTE_INTERFACE_NAME_LIST_MAX" #: daemon/remote_dispatch.h:8283 #, fuzzy msgid "maxnames > REMOTE_NWFILTER_NAME_LIST_MAX" msgstr "maxnames > REMOTE_INTERFACE_NAME_LIST_MAX" #: daemon/remote_dispatch.h:8347 msgid "maxuuids > REMOTE_SECRET_UUID_LIST_MAX" msgstr "maxuuids > REMOTE_SECRET_UUID_LIST_MAX" #: daemon/remote_dispatch.h:9406 #, fuzzy msgid "maxnames > REMOTE_NODE_DEVICE_CAPS_LIST_MAX" msgstr "maxnames > REMOTE_NODE_DEVICE_NAME_LIST_MAX" #: daemon/remote_dispatch.h:9687 #, fuzzy msgid "maxcells > REMOTE_NODE_MAX_CELLS" msgstr "maxCells > REMOTE_NODE_MAX_CELLS" #: daemon/remote_dispatch.h:9920 msgid "maxnames > REMOTE_NODE_DEVICE_NAME_LIST_MAX" msgstr "maxnames > REMOTE_NODE_DEVICE_NAME_LIST_MAX" #: daemon/remote_dispatch.h:11784 msgid "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX" msgstr "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX" #: daemon/stream.c:225 msgid "stream had unexpected termination" msgstr "스트림이 예기치 못하게 종료했습니다" #: daemon/stream.c:228 msgid "stream had I/O failure" msgstr "스트림에 I/O 실패가 일어났습니다" #: daemon/stream.c:609 msgid "stream aborted at client request" msgstr "스트림이 클라이언트의 요청을 중단했습니다" #: daemon/stream.c:613 #, c-format msgid "stream aborted with unexpected status %d" msgstr "스트림이 예기치 못한 상태 %d로 종료했습니다" #: gnulib/lib/gai_strerror.c:57 #, fuzzy msgid "Address family for hostname not supported" msgstr "비밀 저장소를 지원하지 않습니다" #: gnulib/lib/gai_strerror.c:58 msgid "Temporary failure in name resolution" msgstr "" #: gnulib/lib/gai_strerror.c:59 msgid "Bad value for ai_flags" msgstr "" #: gnulib/lib/gai_strerror.c:60 msgid "Non-recoverable failure in name resolution" msgstr "" #: gnulib/lib/gai_strerror.c:61 #, fuzzy msgid "ai_family not supported" msgstr "cpu 친밀도(affinity)가 지원되지 않습니다" #: gnulib/lib/gai_strerror.c:62 #, fuzzy msgid "Memory allocation failure" msgstr "메모리 할당 변경" #: gnulib/lib/gai_strerror.c:63 msgid "No address associated with hostname" msgstr "" #: gnulib/lib/gai_strerror.c:64 #, fuzzy msgid "Name or service not known" msgstr "노드 디바이스 찾을 수 없음" #: gnulib/lib/gai_strerror.c:65 #, fuzzy msgid "Servname not supported for ai_socktype" msgstr "%s 장치에 대해 이동식 미디어가 지원되지 않음" #: gnulib/lib/gai_strerror.c:66 #, fuzzy msgid "ai_socktype not supported" msgstr "네트워크 유형 %d를 지원하지 않습니다" #: gnulib/lib/gai_strerror.c:67 #, fuzzy msgid "System error" msgstr "시스템 호출 오류" #: gnulib/lib/gai_strerror.c:68 #, fuzzy msgid "Argument buffer too small" msgstr "내부 버퍼가 너무 작습니다" #: gnulib/lib/gai_strerror.c:70 msgid "Processing request in progress" msgstr "" #: gnulib/lib/gai_strerror.c:71 msgid "Request canceled" msgstr "" #: gnulib/lib/gai_strerror.c:72 msgid "Request not canceled" msgstr "" #: gnulib/lib/gai_strerror.c:73 msgid "All requests done" msgstr "" #: gnulib/lib/gai_strerror.c:74 msgid "Interrupted by a signal" msgstr "" #: gnulib/lib/gai_strerror.c:75 #, fuzzy msgid "Parameter string not correctly encoded" msgstr "비밀 저장소를 지원하지 않습니다" #: gnulib/lib/gai_strerror.c:87 src/esx/esx_vi.c:4536 #: src/hyperv/hyperv_wmi.c:325 src/rpc/virnetclientprogram.c:183 #: src/rpc/virnetclientstream.c:208 #, fuzzy msgid "Unknown error" msgstr "알려지지 않은 오류" #: gnulib/lib/regcomp.c:130 msgid "Success" msgstr "" #: gnulib/lib/regcomp.c:133 msgid "No match" msgstr "" #: gnulib/lib/regcomp.c:136 #, fuzzy msgid "Invalid regular expression" msgstr "잘못된 비밀정보" #: gnulib/lib/regcomp.c:139 #, fuzzy msgid "Invalid collation character" msgstr "잘못된 매개변수 갯수" #: gnulib/lib/regcomp.c:142 #, fuzzy msgid "Invalid character class name" msgstr "잘못된 매개변수 갯수" #: gnulib/lib/regcomp.c:145 msgid "Trailing backslash" msgstr "" #: gnulib/lib/regcomp.c:148 #, fuzzy msgid "Invalid back reference" msgstr "잘못된 매개변수 '%s'" #: gnulib/lib/regcomp.c:151 msgid "Unmatched [ or [^" msgstr "" #: gnulib/lib/regcomp.c:154 msgid "Unmatched ( or \\(" msgstr "" #: gnulib/lib/regcomp.c:157 msgid "Unmatched \\{" msgstr "" #: gnulib/lib/regcomp.c:160 #, fuzzy msgid "Invalid content of \\{\\}" msgstr "잘못된 비밀정보" #: gnulib/lib/regcomp.c:163 #, fuzzy msgid "Invalid range end" msgstr "잘못된 인수" #: gnulib/lib/regcomp.c:166 #, fuzzy msgid "Memory exhausted" msgstr "처리된 메모리:" #: gnulib/lib/regcomp.c:169 msgid "Invalid preceding regular expression" msgstr "" #: gnulib/lib/regcomp.c:172 msgid "Premature end of regular expression" msgstr "" #: gnulib/lib/regcomp.c:175 msgid "Regular expression too big" msgstr "" #: gnulib/lib/regcomp.c:178 msgid "Unmatched ) or \\)" msgstr "" #: gnulib/lib/regcomp.c:703 msgid "No previous regular expression" msgstr "" #: src/conf/cpu_conf.c:202 msgid "XML does not contain expected 'cpu' element" msgstr "" #: src/conf/cpu_conf.c:215 msgid "" "'arch' element element cannot be used inside 'cpu' element with 'match' " "attribute'" msgstr "" #: src/conf/cpu_conf.c:231 msgid "Attribute mode is only allowed for guest CPU" msgstr "" #: src/conf/cpu_conf.c:238 #, fuzzy, c-format msgid "Invalid mode attribute '%s'" msgstr "잘못된 포트: %s" #: src/conf/cpu_conf.c:266 msgid "Invalid match attribute for CPU specification" msgstr "CPU 설정에서 매치 특성이 잘못되었습니다" #: src/conf/cpu_conf.c:276 msgid "Missing CPU architecture" msgstr "CPU 아키텍쳐가 빠져있습니다" #: src/conf/cpu_conf.c:284 src/cpu/cpu_x86.c:957 msgid "Missing CPU model name" msgstr "CPU 모델 이름이 빠져있습니다" #: src/conf/cpu_conf.c:300 #, fuzzy msgid "Invalid fallback attribute" msgstr "잘못된 인수" #: src/conf/cpu_conf.c:313 #, c-format msgid "vendor_id must be exactly %d characters long" msgstr "" #: src/conf/cpu_conf.c:323 #, fuzzy msgid "vendor id is invalid" msgstr "도메인이 종료되었거나 바르지 않음" #: src/conf/cpu_conf.c:336 #, fuzzy msgid "CPU vendor specified without CPU model" msgstr "CPU 모델이 빠진 상태에서 특징 목록이 지정되었습니다" #: src/conf/cpu_conf.c:348 msgid "Missing 'sockets' attribute in CPU topology" msgstr "CPU 토플로지에 'sockets' 특성이 빠져있습니다" #: src/conf/cpu_conf.c:357 msgid "Missing 'cores' attribute in CPU topology" msgstr "CPU 토플로지에 'cores' 특성이 빠져있습니다" #: src/conf/cpu_conf.c:366 msgid "Missing 'threads' attribute in CPU topology" msgstr "CPU 토플로지에 'threads' 특성이 빠져있습니다" #: src/conf/cpu_conf.c:373 msgid "Invalid CPU topology" msgstr "잘못된 CPU 토플로지입니다" #: src/conf/cpu_conf.c:385 src/conf/cpu_conf.c:600 msgid "Non-empty feature list specified without CPU model" msgstr "CPU 모델이 빠진 상태에서 특징 목록이 지정되었습니다" #: src/conf/cpu_conf.c:412 msgid "Invalid CPU feature policy" msgstr "잘못된 CPU 특징 정책" #: src/conf/cpu_conf.c:422 msgid "Invalid CPU feature name" msgstr "잘못된 CPU 특징 이름" #: src/conf/cpu_conf.c:429 src/conf/cpu_conf.c:691 #, c-format msgid "CPU feature `%s' specified more than once" msgstr "CPU 특징 '%s'가 한번 이상 지정되었습니다" #: src/conf/cpu_conf.c:445 msgid "NUMA topology defined without NUMA cells" msgstr "" #: src/conf/cpu_conf.c:464 #, fuzzy msgid "Missing 'cpus' attribute in NUMA cell" msgstr "CPU 토플로지에 'cores' 특성이 빠져있습니다" #: src/conf/cpu_conf.c:481 #, fuzzy msgid "Missing 'memory' attribute in NUMA cell" msgstr "CPU 토플로지에 'cores' 특성이 빠져있습니다" #: src/conf/cpu_conf.c:488 msgid "Invalid 'memory' attribute in NUMA cell" msgstr "" #: src/conf/cpu_conf.c:547 #, fuzzy, c-format msgid "Unexpected CPU mode %d" msgstr "예기치 못한 비디오 모델 %d" #: src/conf/cpu_conf.c:558 #, c-format msgid "Unexpected CPU match policy %d" msgstr "예상치 못한 CPU 매치 정책 %d" #: src/conf/cpu_conf.c:612 #, fuzzy, c-format msgid "Unexpected CPU fallback value: %d" msgstr "예기치 못한 비디오 모델 %d" #: src/conf/cpu_conf.c:644 src/cpu/cpu_x86.c:677 msgid "Missing CPU feature name" msgstr "CPU 특징 이름 빠짐" #: src/conf/cpu_conf.c:654 #, c-format msgid "Unexpected CPU feature policy %d" msgstr "예상치 못한 CPU 특징 정책 %d" #: src/conf/cpu_conf.c:728 msgid "Target CPU does not match source" msgstr "" #: src/conf/cpu_conf.c:734 #, fuzzy, c-format msgid "Target CPU type %s does not match source %s" msgstr "풀 유형 '%s'는 소스 발견을 지원하지 않습니다" #: src/conf/cpu_conf.c:742 #, fuzzy, c-format msgid "Target CPU mode %s does not match source %s" msgstr "CPU 모델이 일치하지 않습니다: '%s' != '%s'" #: src/conf/cpu_conf.c:750 #, fuzzy, c-format msgid "Target CPU arch %s does not match source %s" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/conf/cpu_conf.c:757 src/conf/cpu_conf.c:771 #, fuzzy, c-format msgid "Target CPU model %s does not match source %s" msgstr "CPU 모델이 일치하지 않습니다: '%s' != '%s'" #: src/conf/cpu_conf.c:764 #, fuzzy, c-format msgid "Target CPU vendor %s does not match source %s" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/conf/cpu_conf.c:778 #, c-format msgid "Target CPU sockets %d does not match source %d" msgstr "" #: src/conf/cpu_conf.c:785 #, c-format msgid "Target CPU cores %d does not match source %d" msgstr "" #: src/conf/cpu_conf.c:792 #, c-format msgid "Target CPU threads %d does not match source %d" msgstr "" #: src/conf/cpu_conf.c:799 #, c-format msgid "Target CPU feature count %zu does not match source %zu" msgstr "" #: src/conf/cpu_conf.c:807 #, fuzzy, c-format msgid "Target CPU feature %s does not match source %s" msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #: src/conf/cpu_conf.c:814 #, c-format msgid "Target CPU feature policy %s does not match source %s" msgstr "" #: src/conf/device_conf.c:68 msgid "Cannot parse
'domain' attribute" msgstr "
'domain' 특성을 구문분석 할 수 없습니다" #: src/conf/device_conf.c:75 src/conf/domain_conf.c:2231 #: src/conf/domain_conf.c:2285 src/conf/domain_conf.c:2368 msgid "Cannot parse
'bus' attribute" msgstr "
'bus' 특성을 구문분석 할 수 없습니다" #: src/conf/device_conf.c:82 src/conf/domain_conf.c:2327 msgid "Cannot parse
'slot' attribute" msgstr "
'slot' 특성을 구문분석 할 수 없습니다" #: src/conf/device_conf.c:89 msgid "Cannot parse
'function' attribute" msgstr "
'function' 특성을 구문분석 할 수 없습니다" #: src/conf/device_conf.c:96 #, fuzzy, c-format msgid "Unknown value '%s' for
'multifunction' attribute" msgstr "
'function' 특성을 구문분석 할 수 없습니다" #: src/conf/device_conf.c:103 msgid "Insufficient specification for PCI address" msgstr "불충분한 PCI 주소 설정 값" #: src/conf/domain_conf.c:698 #, fuzzy, c-format msgid "could not parse weight %s" msgstr "%s에 인자를 넣을 수 없음" #: src/conf/domain_conf.c:711 #, fuzzy msgid "missing per-device path" msgstr "소스 경로가 빠짐" #: src/conf/domain_conf.c:1709 src/conf/interface_conf.c:1285 #: src/conf/network_conf.c:249 src/conf/node_device_conf.c:189 #: src/conf/nwfilter_conf.c:3047 src/conf/storage_conf.c:1510 #: src/libxl/libxl_driver.c:864 src/parallels/parallels_driver.c:622 #: src/qemu/qemu_driver.c:547 src/remote/remote_driver.c:861 #: src/rpc/virnetclientstream.c:157 src/rpc/virnetserver.c:410 #: src/test/test_driver.c:529 src/test/test_driver.c:769 #: src/xen/xen_driver.c:328 msgid "cannot initialize mutex" msgstr "뮤텍스를 초기화할 수 없습니다." #: src/conf/domain_conf.c:1875 src/lxc/lxc_driver.c:2625 #: src/openvz/openvz_driver.c:1968 src/qemu/qemu_driver.c:1561 #: src/qemu/qemu_driver.c:1580 src/qemu/qemu_driver.c:1639 #: src/qemu/qemu_driver.c:1726 src/qemu/qemu_driver.c:1824 #: src/qemu/qemu_driver.c:1879 src/qemu/qemu_driver.c:1967 #: src/qemu/qemu_driver.c:2185 src/qemu/qemu_driver.c:2196 #: src/qemu/qemu_driver.c:2267 src/qemu/qemu_driver.c:2430 #: src/qemu/qemu_driver.c:2934 src/qemu/qemu_driver.c:2993 #: src/qemu/qemu_driver.c:3260 src/qemu/qemu_driver.c:3370 #: src/qemu/qemu_driver.c:3462 src/qemu/qemu_driver.c:5055 #: src/qemu/qemu_driver.c:8279 src/qemu/qemu_driver.c:8344 #: src/qemu/qemu_driver.c:8367 src/qemu/qemu_driver.c:8429 #: src/qemu/qemu_driver.c:8457 src/qemu/qemu_driver.c:8598 #: src/qemu/qemu_driver.c:8959 src/qemu/qemu_driver.c:9094 #: src/qemu/qemu_driver.c:9645 src/qemu/qemu_driver.c:10155 #: src/qemu/qemu_driver.c:10190 src/qemu/qemu_driver.c:10252 #: src/qemu/qemu_driver.c:10310 src/qemu/qemu_driver.c:10485 #: src/qemu/qemu_driver.c:10871 src/qemu/qemu_driver.c:12322 #: src/qemu/qemu_driver.c:12331 src/qemu/qemu_driver.c:12475 #: src/qemu/qemu_driver.c:12594 src/qemu/qemu_driver.c:12627 #: src/qemu/qemu_driver.c:12678 src/qemu/qemu_driver.c:12770 #: src/qemu/qemu_driver.c:13156 src/qemu/qemu_driver.c:13639 #: src/qemu/qemu_driver.c:13712 src/qemu/qemu_driver.c:13743 #: src/qemu/qemu_driver.c:13789 src/qemu/qemu_driver.c:13863 #: src/qemu/qemu_driver.c:13885 src/qemu/qemu_migration.c:2622 #: src/uml/uml_driver.c:2424 src/xen/xen_driver.c:2141 #: src/xen/xen_hypervisor.c:1181 src/xen/xen_hypervisor.c:1262 #: src/xen/xen_hypervisor.c:1381 src/xen/xm_internal.c:711 msgid "domain is not running" msgstr "도메인이 실행중이 아닙니다" #: src/conf/domain_conf.c:1882 src/libxl/libxl_driver.c:1663 #: src/libxl/libxl_driver.c:2273 #, fuzzy msgid "cannot change persistent config of a transient domain" msgstr "도메인의 영구 설정을 변경할 수 없음" #: src/conf/domain_conf.c:1888 #, fuzzy msgid "Get persistent config failed" msgstr "풀의 설정 파일이 없습니다" #: src/conf/domain_conf.c:2132 #, fuzzy, c-format msgid "unexpected rom bar value %d" msgstr "예기치 못한 비디오 모델 %d" #: src/conf/domain_conf.c:2198 #, c-format msgid "unknown address type '%d'" msgstr "알 수 없는 주소 유형 '%d'" #: src/conf/domain_conf.c:2224 src/conf/domain_conf.c:2278 #: src/conf/domain_conf.c:2320 msgid "Cannot parse
'controller' attribute" msgstr "
'controller' 특성을 구문분석 할 수 없습니다" #: src/conf/domain_conf.c:2238 #, fuzzy msgid "Cannot parse
'target' attribute" msgstr "
'slot' 특성을 구문분석 할 수 없습니다" #: src/conf/domain_conf.c:2245 msgid "Cannot parse
'unit' attribute" msgstr "
'unit' 특성을 구문분석 할 수 없습니다" #: src/conf/domain_conf.c:2292 src/conf/domain_conf.c:2358 #, fuzzy msgid "Cannot parse
'port' attribute" msgstr "
'slot' 특성을 구문분석 할 수 없습니다" #: src/conf/domain_conf.c:2393 #, fuzzy msgid "Cannot parse
'reg' attribute" msgstr "
'slot' 특성을 구문분석 할 수 없습니다" #: src/conf/domain_conf.c:2421 #, fuzzy msgid "Cannot parse 'startport' attribute" msgstr "
'slot' 특성을 구문분석 할 수 없습니다" #: src/conf/domain_conf.c:2444 #, fuzzy msgid "missing boot order attribute" msgstr "auth host 특성이 빠짐" #: src/conf/domain_conf.c:2449 #, c-format msgid "incorrect boot order '%s', expecting positive integer" msgstr "" #: src/conf/domain_conf.c:2458 msgid "boot orders have to be contiguous and starting from 1" msgstr "" #: src/conf/domain_conf.c:2462 #, c-format msgid "boot order %d used for more than one device" msgstr "" #: src/conf/domain_conf.c:2541 #, fuzzy, c-format msgid "unknown rom bar value '%s'" msgstr "알려지지 전체화면 값 '%s'" #: src/conf/domain_conf.c:2557 src/conf/network_conf.c:1189 #: src/conf/network_conf.c:1208 #, c-format msgid "unknown address type '%s'" msgstr "알 수 없는 주소 유형 '%s'" #: src/conf/domain_conf.c:2562 src/conf/network_conf.c:1194 msgid "No type specified for device address" msgstr "장치 주소 유형이 지정되지 않았습니다" #: src/conf/domain_conf.c:2601 msgid "Unknown device address type" msgstr "알려지지 않은 장치 주소 유형" #: src/conf/domain_conf.c:2657 #, c-format msgid "cannot parse vendor id %s" msgstr "벤더 id %s를 구문분석 할 수 없음" #: src/conf/domain_conf.c:2664 msgid "usb vendor needs id" msgstr "usb 벤더에는 id가 필요합니다" #: src/conf/domain_conf.c:2675 #, c-format msgid "cannot parse product %s" msgstr "제품 %s를 구문분석할 수 없습니다" #: src/conf/domain_conf.c:2683 msgid "usb product needs id" msgstr "usb 제품에는 id가 필요합니다" #: src/conf/domain_conf.c:2694 #, c-format msgid "cannot parse bus %s" msgstr "버스 %s을(를) 구문 분석할 수 없음" #: src/conf/domain_conf.c:2701 msgid "usb address needs bus id" msgstr "usb 주소에는 버스 id가 필요합니다" #: src/conf/domain_conf.c:2710 #, c-format msgid "cannot parse device %s" msgstr "장치 %s을(를) 구문 분석할 수 없음 " #: src/conf/domain_conf.c:2718 msgid "usb address needs device id" msgstr "usb 주소에는 장치 id가 필요합니다" #: src/conf/domain_conf.c:2723 #, c-format msgid "unknown usb source type '%s'" msgstr "알려지지 않은 usb 소스 유형 '%s' " #: src/conf/domain_conf.c:2733 msgid "vendor cannot be 0." msgstr "벤더는 0이 될 수 없습니다" #: src/conf/domain_conf.c:2739 msgid "missing vendor" msgstr "벤더 빠짐" #: src/conf/domain_conf.c:2744 msgid "missing product" msgstr "제품 빠짐" #: src/conf/domain_conf.c:2778 #, fuzzy, c-format msgid "unsupported element '%s' of 'origstates'" msgstr "드라이버 이름 '%s'가 디스크 '%s'에 대해 지원되지 않음" #: src/conf/domain_conf.c:2814 src/conf/domain_conf.c:3967 #: src/conf/domain_conf.c:4782 #, c-format msgid "Unable to parse devaddr parameter '%s'" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: src/conf/domain_conf.c:2827 #, c-format msgid "unknown pci source type '%s'" msgstr "알려지지 않은 pci 소스 유형 '%s'" #: src/conf/domain_conf.c:2859 #, c-format msgid "unknown hostdev mode '%s'" msgstr "알려지지 않은 hostdev 모드 '%s'" #: src/conf/domain_conf.c:2888 #, fuzzy, c-format msgid "unknown host device source address type '%s'" msgstr "알려지지 않은 호스트 장치 유형 '%s' " #: src/conf/domain_conf.c:2894 #, fuzzy msgid "missing source address type" msgstr "소스 디렉터리가 빠짐" #: src/conf/domain_conf.c:2900 #, fuzzy msgid "Missing element in hostdev device" msgstr "장치의 소스 정보 부재" #: src/conf/domain_conf.c:2914 #, fuzzy, c-format msgid "address type='%s' not supported in hostdev interfaces" msgstr "이더넷 인터페이스에 대해 IP주소가 지원되지 않습니다" #: src/conf/domain_conf.c:3032 msgid "invalid security type" msgstr "유효하지 않은 보안 유형 " #: src/conf/domain_conf.c:3046 src/conf/domain_conf.c:3268 #, fuzzy, c-format msgid "invalid security relabel value %s" msgstr "잘못된 않은 보안 레이블 %s" #: src/conf/domain_conf.c:3054 msgid "dynamic label type must use resource relabeling" msgstr "" #: src/conf/domain_conf.c:3060 msgid "resource relabeling is not compatible with 'none' label type" msgstr "" #: src/conf/domain_conf.c:3081 msgid "security label is missing" msgstr "보안 레이블이 빠졌습니다" #: src/conf/domain_conf.c:3096 msgid "security imagelabel is missing" msgstr "보안 이미지레이블이 빠졌습니다" #: src/conf/domain_conf.c:3180 #, fuzzy msgid "missing security model in domain seclabel" msgstr "보안 모델 빠짐" #: src/conf/domain_conf.c:3190 #, fuzzy msgid "missing security model when using multiple labels" msgstr "보안 모델 빠짐" #: src/conf/domain_conf.c:3255 msgid "label overrides require relabeling to be enabled at the domain level" msgstr "" #: src/conf/domain_conf.c:3285 #, c-format msgid "Cannot specify a label if relabelling is turned off. model=%s" msgstr "" #: src/conf/domain_conf.c:3340 #, fuzzy msgid "Missing 'key' element for lease" msgstr "메모리 요소 빠" #: src/conf/domain_conf.c:3345 #, fuzzy msgid "Missing 'target' element for lease" msgstr "장치의 대상 정보 부재" #: src/conf/domain_conf.c:3352 #, fuzzy, c-format msgid "Malformed lease target offset %s" msgstr "잘못된 형식의 볼륨 확장 오프셋 값" #: src/conf/domain_conf.c:3441 #, c-format msgid "unknown disk type '%s'" msgstr "알 수 없는 디스크 유형 '%s'" #: src/conf/domain_conf.c:3475 #, fuzzy msgid "missing protocol type" msgstr "제품 빠짐" #: src/conf/domain_conf.c:3481 #, fuzzy, c-format msgid "unknown protocol type '%s'" msgstr "알려지지 않은 프로토콜 '%s'" #: src/conf/domain_conf.c:3488 #, fuzzy msgid "missing name for disk source" msgstr "%s 인자에 대해 빠진 값" #: src/conf/domain_conf.c:3506 #, fuzzy msgid "missing name for host" msgstr "소스 호스트가 빠짐" #: src/conf/domain_conf.c:3512 #, fuzzy msgid "missing port for host" msgstr "소스 호스트가 빠짐" #: src/conf/domain_conf.c:3521 src/conf/domain_conf.c:11510 #, c-format msgid "unexpected disk type %s" msgstr "예기치 못한 디스크 유형 %s" #: src/conf/domain_conf.c:3548 msgid "invalid geometry settings (cyls)" msgstr "" #: src/conf/domain_conf.c:3554 msgid "invalid geometry settings (heads)" msgstr "" #: src/conf/domain_conf.c:3560 msgid "invalid geometry settings (secs)" msgstr "" #: src/conf/domain_conf.c:3568 #, fuzzy, c-format msgid "invalid translation value '%s'" msgstr "잘못된 도메인 상태 '%s'" #: src/conf/domain_conf.c:3590 #, fuzzy msgid "mirror requires file name" msgstr "프로파일 이름 복사 중 오류" #: src/conf/domain_conf.c:3603 #, fuzzy msgid "missing username for auth" msgstr "소스 호스트가 빠짐" #: src/conf/domain_conf.c:3615 #, fuzzy msgid "missing type for secret" msgstr "소스 호스트가 빠짐" #: src/conf/domain_conf.c:3621 #, fuzzy, c-format msgid "invalid secret type %s" msgstr "유효하지 않은 보안 유형 " #: src/conf/domain_conf.c:3631 #, fuzzy msgid "only one of uuid and usage can be specified" msgstr "알려지지 않은 모드가 지정되었습니다" #: src/conf/domain_conf.c:3639 #, fuzzy, c-format msgid "malformed uuid %s" msgstr "잘못된 형식의 8진 모드" #: src/conf/domain_conf.c:3693 msgid "total and read/write bytes_sec cannot be set at the same time" msgstr "" #: src/conf/domain_conf.c:3703 msgid "total and read/write iops_sec cannot be set at the same time" msgstr "" #: src/conf/domain_conf.c:3737 #, c-format msgid "unknown disk device '%s'" msgstr "알려지지 않은 디스크 장치 '%s'" #: src/conf/domain_conf.c:3774 #, c-format msgid "Invalid floppy device name: %s" msgstr "잘못된 플로피 장치 이름: %s" #: src/conf/domain_conf.c:3790 #, c-format msgid "Invalid harddisk device name: %s" msgstr "잘못된 하드디스크 장치 이름: %s" #: src/conf/domain_conf.c:3798 src/conf/snapshot_conf.c:125 #, fuzzy, c-format msgid "unknown disk snapshot setting '%s'" msgstr "알 수 없는 디스크 유형 '%s'" #: src/conf/domain_conf.c:3815 #, fuzzy, c-format msgid "unknown disk rawio setting '%s'" msgstr "알 수 없는 디스크 유형 '%s'" #: src/conf/domain_conf.c:3821 msgid "rawio can be used only with device='lun'" msgstr "" #: src/conf/domain_conf.c:3829 #, c-format msgid "unknown disk bus type '%s'" msgstr "알려지지 않은 디스크 버스 유형 '%s'" #: src/conf/domain_conf.c:3854 #, fuzzy, c-format msgid "unknown disk tray status '%s'" msgstr "알 수 없는 디스크 유형 '%s'" #: src/conf/domain_conf.c:3861 msgid "tray is only valid for cdrom and floppy" msgstr "" #: src/conf/domain_conf.c:3873 #, c-format msgid "Invalid bus type '%s' for floppy disk" msgstr "잘못된 플로피 디스크 버스 유형 '%s'" #: src/conf/domain_conf.c:3879 #, c-format msgid "Invalid bus type '%s' for disk" msgstr "잘못된 디스크 버스 유형 '%s'" #: src/conf/domain_conf.c:3886 #, c-format msgid "unknown disk cache mode '%s'" msgstr "알려지지 않은 디스크 캐시 모드 '%s' " #: src/conf/domain_conf.c:3893 #, fuzzy, c-format msgid "unknown disk error policy '%s'" msgstr "알려지지 않은 디스크 장치 '%s'" #: src/conf/domain_conf.c:3902 #, fuzzy, c-format msgid "unknown disk read error policy '%s'" msgstr "알려지지 않은 디스크 장치 '%s'" #: src/conf/domain_conf.c:3911 #, fuzzy, c-format msgid "unknown disk io mode '%s'" msgstr "알려지지 않은 디스크 캐시 모드 '%s' " #: src/conf/domain_conf.c:3919 msgid "disk ioeventfd mode supported only for virtio bus" msgstr "" #: src/conf/domain_conf.c:3927 #, fuzzy, c-format msgid "unknown disk ioeventfd mode '%s'" msgstr "알려지지 않은 디스크 캐시 모드 '%s' " #: src/conf/domain_conf.c:3937 msgid "disk event_idx mode supported only for virtio bus" msgstr "" #: src/conf/domain_conf.c:3945 #, fuzzy, c-format msgid "unknown disk event_idx mode '%s'" msgstr "알려지지 않은 디스크 캐시 모드 '%s' " #: src/conf/domain_conf.c:3956 #, fuzzy, c-format msgid "unknown disk copy_on_read mode '%s'" msgstr "알려지지 않은 디스크 캐시 모드 '%s' " #: src/conf/domain_conf.c:3983 #, fuzzy, c-format msgid "unknown startupPolicy value '%s'" msgstr "알려지지 전체화면 값 '%s'" #: src/conf/domain_conf.c:3991 #, c-format msgid "Setting disk %s is allowed only for cdrom or floppy" msgstr "" #: src/conf/domain_conf.c:4125 #, c-format msgid "Unknown controller type '%s'" msgstr "알 수 없는 컨트롤러 유형 '%s'" #: src/conf/domain_conf.c:4134 #, c-format msgid "Cannot parse controller index %s" msgstr "컨트롤러 인덱스 %s를 구문 분석할 수 없습니다" #: src/conf/domain_conf.c:4143 #, fuzzy, c-format msgid "Unknown model type '%s'" msgstr "알 수 없는 디스크 유형 '%s'" #: src/conf/domain_conf.c:4161 #, c-format msgid "Invalid ports: %s" msgstr "잘못된 포트: %s" #: src/conf/domain_conf.c:4176 #, c-format msgid "Invalid vectors: %s" msgstr "잘못된 벡터: %s" #: src/conf/domain_conf.c:4218 msgid "Controllers must use the 'pci' address type" msgstr "컨트롤러는 'pci' 주소 유형을 가져야만 합니다" #: src/conf/domain_conf.c:4262 #, fuzzy, c-format msgid "could not parse element %s" msgstr "메모리 수준 '%s'를 구문분석 할 수 없음" #: src/conf/domain_conf.c:4266 #, fuzzy, c-format msgid "missing element %s" msgstr "메모리 요소 빠" #: src/conf/domain_conf.c:4321 #, c-format msgid "unknown filesystem type '%s'" msgstr "알려지지 않은 파일 시스템 유형 '%s'" #: src/conf/domain_conf.c:4332 #, fuzzy, c-format msgid "unknown accessmode '%s'" msgstr "알려지지 않은 디스크 캐시 모드 '%s' " #: src/conf/domain_conf.c:4384 #, fuzzy, c-format msgid "unknown fs driver type '%s'" msgstr "알려지지 않은 호스트 장치 유형 '%s' " #: src/conf/domain_conf.c:4392 #, fuzzy, c-format msgid "unknown filesystem write policy '%s'" msgstr "알려지지 않은 파일 시스템 유형 '%s'" #: src/conf/domain_conf.c:4415 #, fuzzy msgid "missing 'usage' attribute for RAM filesystem" msgstr "CPU 토플로지에 'cores' 특성이 빠져있습니다" #: src/conf/domain_conf.c:4420 #, fuzzy, c-format msgid "cannot parse usage '%s' for RAM filesystem" msgstr "%s의 값 구문 분석 실패" #: src/conf/domain_conf.c:4484 #, fuzzy msgid "missing type attribute in interface's element" msgstr "도메인 유형 특성 빠" #: src/conf/domain_conf.c:4489 #, c-format msgid "unknown type '%s' in interface's element" msgstr "" #: src/conf/domain_conf.c:4497 #, fuzzy, c-format msgid "unsupported type '%s' in interface's element" msgstr "지원되지 않는 dom 인터페이스 < 4" #: src/conf/domain_conf.c:4518 #, fuzzy, c-format msgid "" " element unsupported for type='%s' in interface's " "element" msgstr "지원되지 않는 dom 인터페이스 < 4" #: src/conf/domain_conf.c:4532 #, c-format msgid "Unkown mode '%s' in interface element" msgstr "" #: src/conf/domain_conf.c:4637 #, c-format msgid "unknown interface type '%s'" msgstr "알려지지 않은 인터페이스 유형 '%s'" #: src/conf/domain_conf.c:4688 #, fuzzy, c-format msgid " element unsupported for " msgstr "이더넷 인터페이스에 대해 스크립트 실행이 지원되지 않습니다" #: src/conf/domain_conf.c:4729 msgid "Invalid specification of multiple s in a single " msgstr "" #: src/conf/domain_conf.c:4764 src/qemu/qemu_command.c:7224 #, c-format msgid "unable to parse mac address '%s'" msgstr "mac 주소 '%s' 구문 분석할 수 없습니다" #: src/conf/domain_conf.c:4770 #, c-format msgid "expected unicast mac address, found multicast '%s'" msgstr "" #: src/conf/domain_conf.c:4801 msgid "Network interfaces must use 'pci' address type" msgstr "네트워크 인터페이스는 'pci' 주소 유형을 가져야만 합니다" #: src/conf/domain_conf.c:4809 msgid "" "No 'network' attribute specified with " msgstr "" " 'network' 특성이 로 지정되지 않았습니다" #: src/conf/domain_conf.c:4835 msgid "" "No 'bridge' attribute specified with " msgstr "" " 'bridge' 특성이 로 지정되지 않았습니다" #: src/conf/domain_conf.c:4852 msgid "No 'port' attribute specified with socket interface" msgstr " 'port' 특성이 소켓 인터페이스로 지정되지 않았습니다." #: src/conf/domain_conf.c:4858 msgid "Cannot parse 'port' attribute with socket interface" msgstr "소켓 인터페이스에 지정된 'port'를 구문 분석 할 수 없습니다" #: src/conf/domain_conf.c:4867 msgid "No 'address' attribute specified with socket interface" msgstr "소켓 인터페이스에 지정된 'address'를 구문 분석 할 수 없습니다" #: src/conf/domain_conf.c:4880 msgid "" "No 'name' attribute specified with " msgstr "" " 'name' 특성이 로 지정되지 않았습니다" #: src/conf/domain_conf.c:4891 msgid "No 'dev' attribute specified with " msgstr "" " 'dev' 특성이 로 지정되지 않았습니다" #: src/conf/domain_conf.c:4900 msgid "Unkown mode has been specified" msgstr "알려지지 않은 모드가 지정되었습니다" #: src/conf/domain_conf.c:4961 msgid "Model name contains invalid characters" msgstr "모델 이름에 잘못된 문자가 들어있습니다" #: src/conf/domain_conf.c:4974 #, fuzzy, c-format msgid "Unknown interface has been specified" msgstr "알려지지 않은 모드가 지정되었습니다" #: src/conf/domain_conf.c:4986 #, fuzzy, c-format msgid "Unknown interface has been specified" msgstr "알려지지 않은 모드가 지정되었습니다" #: src/conf/domain_conf.c:4997 #, fuzzy, c-format msgid "unknown interface ioeventfd mode '%s'" msgstr "알려지지 않은 인터페이스 유형 '%s'" #: src/conf/domain_conf.c:5007 #, fuzzy, c-format msgid "unknown interface event_idx mode '%s'" msgstr "알려지지 않은 인터페이스 유형 '%s'" #: src/conf/domain_conf.c:5019 #, fuzzy, c-format msgid "unknown interface link state '%s'" msgstr "알려지지 않은 인터페이스 유형 '%s'" #: src/conf/domain_conf.c:5045 msgid "sndbuf must be a positive integer" msgstr "" #: src/conf/domain_conf.c:5093 #, fuzzy, c-format msgid "target type must be specified for %s device" msgstr "장치 주소 유형이 지정되지 않았습니다" #: src/conf/domain_conf.c:5100 msgid "Driver does not have a default console type set" msgstr "" #: src/conf/domain_conf.c:5168 #, fuzzy, c-format msgid "unknown target type '%s' specified for character device" msgstr "장치 주소 유형이 지정되지 않았습니다" #: src/conf/domain_conf.c:5182 msgid "guestfwd channel does not define a target address" msgstr "guestfwd 채널이 타겟 주소를 정의하지 않습니다" #: src/conf/domain_conf.c:5197 msgid "guestfwd channel only supports IPv4 addresses" msgstr "guestfwd 채널은 오직 IPv4 주소만을 지원합니다" #: src/conf/domain_conf.c:5204 msgid "guestfwd channel does not define a target port" msgstr "guestfwd 채널에 대상 포트가 정의되지 않았습니다" #: src/conf/domain_conf.c:5211 src/conf/domain_conf.c:5235 #: src/conf/storage_conf.c:525 #, c-format msgid "Invalid port number: %s" msgstr "잘못된 포트 번호: %s" #: src/conf/domain_conf.c:5307 #, c-format msgid "Unknown source mode '%s'" msgstr "알려지지 않은 소스 모드 '%s'" #: src/conf/domain_conf.c:5340 src/conf/domain_conf.c:5423 msgid "Missing source path attribute for char device" msgstr "캐릭터 장치에 대한 소스 경로 특성 빠짐" #: src/conf/domain_conf.c:5358 src/conf/domain_conf.c:5375 msgid "Missing source host attribute for char device" msgstr "캐릭터 장치에 대한 소스 호스트 특성 빠짐" #: src/conf/domain_conf.c:5363 src/conf/domain_conf.c:5380 #: src/conf/domain_conf.c:5405 msgid "Missing source service attribute for char device" msgstr "캐릭터 장치에 대한 소스 서비스 특성 빠짐" #: src/conf/domain_conf.c:5396 #, c-format msgid "Unknown protocol '%s'" msgstr "알려지지 않은 프로토콜 '%s'" #: src/conf/domain_conf.c:5526 src/conf/domain_conf.c:5670 #, fuzzy, c-format msgid "unknown type presented to host for character device: %s" msgstr "알려져 있지 않은 문자 장치 문법 %s" #: src/conf/domain_conf.c:5534 #, fuzzy, c-format msgid "unknown character device type: %s" msgstr "알려져 있지 않은 문자 장치 문법 %s" #: src/conf/domain_conf.c:5563 msgid "spicevmc device type only supports virtio" msgstr "" #: src/conf/domain_conf.c:5603 #, fuzzy msgid "missing smartcard device mode" msgstr "소스 장치가 빠짐" #: src/conf/domain_conf.c:5608 #, fuzzy, c-format msgid "unknown smartcard device mode: %s" msgstr "알려져 있지 않은 문자 장치 문법 %s" #: src/conf/domain_conf.c:5625 src/conf/domain_conf.c:5654 msgid "host-certificates mode needs exactly three certificates" msgstr "" #: src/conf/domain_conf.c:5645 #, fuzzy, c-format msgid "expecting absolute path: %s" msgstr "분리자 예상하기" #: src/conf/domain_conf.c:5664 #, fuzzy msgid "passthrough mode requires a character device type attribute" msgstr "
'function' 특성을 구문분석 할 수 없습니다" #: src/conf/domain_conf.c:5688 #, fuzzy msgid "unknown smartcard mode" msgstr "알려지지 않은 와치독 모델: '%s' " #: src/conf/domain_conf.c:5697 #, fuzzy msgid "Controllers must use the 'ccid' address type" msgstr "컨트롤러는 'pci' 주소 유형을 가져야만 합니다" #: src/conf/domain_conf.c:5733 msgid "missing input device type" msgstr "입력 장치 타입 빠짐" #: src/conf/domain_conf.c:5739 #, c-format msgid "unknown input device type '%s'" msgstr "알려지지 않은 입력 장치 유형 '%s' " #: src/conf/domain_conf.c:5746 #, c-format msgid "unknown input bus type '%s'" msgstr "알려지지 않은 입력 버스 유형 '%s' " #: src/conf/domain_conf.c:5754 #, c-format msgid "ps2 bus does not support %s input device" msgstr "ps2 버스는 %s 입력 장치를 지원하지 않음 " #: src/conf/domain_conf.c:5760 src/conf/domain_conf.c:5767 #, c-format msgid "unsupported input bus %s" msgstr "지원되지 않는 입력 버스 %s " #: src/conf/domain_conf.c:5772 #, c-format msgid "xen bus does not support %s input device" msgstr "xen 버스는 %s 입력 장치를 지원하지 않음 " #: src/conf/domain_conf.c:5795 src/conf/domain_conf.c:7176 #, fuzzy msgid "Invalid address for a USB device" msgstr "잘못된 ip 주소 접두어 값" #: src/conf/domain_conf.c:5828 #, fuzzy msgid "missing hub device type" msgstr "입력 장치 타입 빠짐" #: src/conf/domain_conf.c:5834 #, fuzzy, c-format msgid "unknown hub device type '%s'" msgstr "알려지지 않은 문자 장치 유형 '%s'" #: src/conf/domain_conf.c:5879 #, fuzzy msgid "missing timer name" msgstr "CPU 모델 이름이 빠져있습니다" #: src/conf/domain_conf.c:5884 #, fuzzy, c-format msgid "unknown timer name '%s'" msgstr "알려지지 않은 비디오 모델: '%s' " #: src/conf/domain_conf.c:5896 #, fuzzy, c-format msgid "unknown timer present value '%s'" msgstr "알려지지 전체화면 값 '%s'" #: src/conf/domain_conf.c:5906 #, fuzzy, c-format msgid "unknown timer tickpolicy '%s'" msgstr "알려지지 않은 프로토콜 '%s'" #: src/conf/domain_conf.c:5916 #, fuzzy, c-format msgid "unknown timer track '%s'" msgstr "알려지지 않은 유형 '%s'" #: src/conf/domain_conf.c:5926 #, fuzzy msgid "invalid timer frequency" msgstr "잘못된 응답 헤더" #: src/conf/domain_conf.c:5935 #, fuzzy, c-format msgid "unknown timer mode '%s'" msgstr "알려지지 않은 비디오 모델: '%s' " #: src/conf/domain_conf.c:5948 #, fuzzy msgid "invalid catchup threshold" msgstr "잘못된 경로: %s" #: src/conf/domain_conf.c:5957 #, fuzzy msgid "invalid catchup slew" msgstr "잘못된 경로: %s" #: src/conf/domain_conf.c:5966 #, fuzzy msgid "invalid catchup limit" msgstr "잘못된 경로" #: src/conf/domain_conf.c:6019 #, c-format msgid "cannot parse password validity time '%s', expect YYYY-MM-DDTHH:MM:SS" msgstr "" #: src/conf/domain_conf.c:6038 #, fuzzy, c-format msgid "unknown connected value %s" msgstr "알려지지 전체화면 값 '%s'" #: src/conf/domain_conf.c:6049 msgid "VNC supports connected='keep' only" msgstr "" #: src/conf/domain_conf.c:6071 #, fuzzy msgid "graphics listen type must be specified" msgstr "컨테이너 ID가 지정되지 않았습니다" #: src/conf/domain_conf.c:6077 #, fuzzy, c-format msgid "unknown graphics listen type '%s'" msgstr "알려지지 않은 그래픽스 유형 '%s'" #: src/conf/domain_conf.c:6097 msgid "network attribute not allowed when listen type is not network" msgstr "" #: src/conf/domain_conf.c:6139 msgid "missing graphics device type" msgstr "그래픽 장치 유형 부재 " #: src/conf/domain_conf.c:6145 #, c-format msgid "unknown graphics device type '%s'" msgstr "알려지지 않은 그래픽 장치 유형 '%s' " #: src/conf/domain_conf.c:6212 #, c-format msgid "" "graphics listen attribute %s must match address attribute of first listen " "element (found %s)" msgstr "" #: src/conf/domain_conf.c:6228 #, c-format msgid "cannot parse vnc port %s" msgstr "vnc 포트 %s을(를) 구문 분석할 수 없음 " #: src/conf/domain_conf.c:6269 src/conf/domain_conf.c:6336 #, c-format msgid "unknown fullscreen value '%s'" msgstr "알려지지 전체화면 값 '%s'" #: src/conf/domain_conf.c:6288 #, c-format msgid "cannot parse rdp port %s" msgstr "rdp 포트 %s를 구문분석할 수 없음 " #: src/conf/domain_conf.c:6357 #, fuzzy, c-format msgid "cannot parse spice port %s" msgstr "vnc 포트 %s을(를) 구문 분석할 수 없음 " #: src/conf/domain_conf.c:6370 #, fuzzy, c-format msgid "cannot parse spice tlsPort %s" msgstr "vnc 포트 %s을(를) 구문 분석할 수 없음 " #: src/conf/domain_conf.c:6390 #, fuzzy, c-format msgid "unknown default spice channel mode %s" msgstr "알려지지 않은 디스크 캐시 모드 '%s' " #: src/conf/domain_conf.c:6426 msgid "spice channel missing name/mode" msgstr "" #: src/conf/domain_conf.c:6434 #, fuzzy, c-format msgid "unknown spice channel name %s" msgstr "알려지지 않은 비디오 모델: '%s' " #: src/conf/domain_conf.c:6442 #, fuzzy, c-format msgid "unknown spice channel mode %s" msgstr "알려지지 않은 디스크 캐시 모드 '%s' " #: src/conf/domain_conf.c:6458 msgid "spice image missing compression" msgstr "" #: src/conf/domain_conf.c:6465 #, fuzzy, c-format msgid "unknown spice image compression %s" msgstr "알려지지 않은 비디오 모델: '%s' " #: src/conf/domain_conf.c:6479 msgid "spice jpeg missing compression" msgstr "" #: src/conf/domain_conf.c:6486 #, fuzzy, c-format msgid "unknown spice jpeg compression %s" msgstr "알려지지 않은 비디오 모델: '%s' " #: src/conf/domain_conf.c:6500 msgid "spice zlib missing compression" msgstr "" #: src/conf/domain_conf.c:6507 #, fuzzy, c-format msgid "unknown spice zlib compression %s" msgstr "알려지지 않은 비디오 모델: '%s' " #: src/conf/domain_conf.c:6521 msgid "spice playback missing compression" msgstr "" #: src/conf/domain_conf.c:6528 #, fuzzy msgid "unknown spice playback compression" msgstr "알려지지 않은 비디오 모델: '%s' " #: src/conf/domain_conf.c:6542 msgid "spice streaming missing mode" msgstr "" #: src/conf/domain_conf.c:6548 #, fuzzy msgid "unknown spice streaming mode" msgstr "알려지지 않은 디스크 캐시 모드 '%s' " #: src/conf/domain_conf.c:6562 msgid "spice clipboard missing copypaste" msgstr "" #: src/conf/domain_conf.c:6569 #, fuzzy, c-format msgid "unknown copypaste value '%s'" msgstr "알려지지 전체화면 값 '%s'" #: src/conf/domain_conf.c:6582 #, fuzzy msgid "spice mouse missing mode" msgstr "알려지지 않은 디스크 캐시 모드 '%s' " #: src/conf/domain_conf.c:6588 #, fuzzy, c-format msgid "unknown mouse mode value '%s'" msgstr "알려지지 전체화면 값 '%s'" #: src/conf/domain_conf.c:6631 #, fuzzy, c-format msgid "unknown codec type '%s'" msgstr "알 수 없는 디스크 유형 '%s'" #: src/conf/domain_conf.c:6666 #, c-format msgid "unknown sound model '%s'" msgstr "알려지지 않은 사운드 모델: '%s' " #: src/conf/domain_conf.c:6733 msgid "watchdog must contain model name" msgstr "와치독에는 모델명이 포함되어야 합니다" #: src/conf/domain_conf.c:6739 #, c-format msgid "unknown watchdog model '%s'" msgstr "알려지지 않은 와치독 모델: '%s' " #: src/conf/domain_conf.c:6750 #, c-format msgid "unknown watchdog action '%s'" msgstr "알려지지 않은 와치독 동작 '%s'" #: src/conf/domain_conf.c:6786 #, fuzzy msgid "balloon memory must contain model name" msgstr "와치독에는 모델명이 포함되어야 합니다" #: src/conf/domain_conf.c:6791 #, fuzzy, c-format msgid "unknown memory balloon model '%s'" msgstr "알려지지 않은 사운드 모델: '%s' " #: src/conf/domain_conf.c:6818 msgid "XML does not contain expected 'sysinfo' element" msgstr "" #: src/conf/domain_conf.c:6830 #, fuzzy msgid "sysinfo must contain a type attribute" msgstr "도메인 유형 특성 빠" #: src/conf/domain_conf.c:6835 #, fuzzy, c-format msgid "unknown sysinfo type '%s'" msgstr "알려지지 않은 유형 '%s'" #: src/conf/domain_conf.c:7013 #, c-format msgid "unknown video model '%s'" msgstr "알려지지 않은 비디오 모델: '%s' " #: src/conf/domain_conf.c:7019 msgid "missing video model and cannot determine default" msgstr "비디오 모델이 빠져있으며, 기본 모델명을 결정할 수 없음" #: src/conf/domain_conf.c:7027 #, c-format msgid "cannot parse video ram '%s'" msgstr "비디오 램 '%s'을 구문 분석할 수 없음" #: src/conf/domain_conf.c:7037 #, c-format msgid "cannot parse video heads '%s'" msgstr "비디오 헤드 '%s'를 구문분석 할 수 없음" #: src/conf/domain_conf.c:7094 msgid "PCI host devices must use 'pci' address type" msgstr "PIC 호스트 장치는 'pci' 주소 유형을 사용해야만 합니다." #: src/conf/domain_conf.c:7131 #, fuzzy, c-format msgid "unknown redirdev bus '%s'" msgstr "알려지지 크기 단위 %s" #: src/conf/domain_conf.c:7142 #, fuzzy, c-format msgid "unknown redirdev character device type '%s'" msgstr "알려져 있지 않은 문자 장치 문법 %s" #: src/conf/domain_conf.c:7147 #, fuzzy msgid "missing type in redirdev" msgstr "hostdev에 유형이 빠짐" #: src/conf/domain_conf.c:7205 #, c-format msgid "unknown lifecycle action %s" msgstr "알려지지 않은 생명주기 동작 %s" #: src/conf/domain_conf.c:7224 tools/virsh-domain.c:7517 #, fuzzy msgid "(device_definition)" msgstr "잘못된 CPU 정의" #: src/conf/domain_conf.c:7294 msgid "unknown device type" msgstr "알려지지 않은 장치 유형 " #: src/conf/domain_conf.c:7802 msgid "unknown virt type" msgstr "알려지지 않은 virt 유형 " #: src/conf/domain_conf.c:7813 #, c-format msgid "no emulator for domain %s os type %s on architecture %s" msgstr "도메인 %s, 운영체제 유형 %s, 아키텍쳐 %s에 대한 에뮬레이터 없음" #: src/conf/domain_conf.c:7841 #, fuzzy msgid "cannot count boot devices" msgstr "부트 장치를 추출할 수 없음" #: src/conf/domain_conf.c:7852 msgid "per-device boot elements cannot be used together with os/boot elements" msgstr "" #: src/conf/domain_conf.c:7862 msgid "missing boot device" msgstr "부트 장치 빠" #: src/conf/domain_conf.c:7867 #, c-format msgid "unknown boot device '%s'" msgstr "알려지지 않은 부팅 장치 %s " #: src/conf/domain_conf.c:7895 msgid "need at least one serial port for useserial" msgstr "" #: src/conf/domain_conf.c:7950 msgid "vcpu id must be an unsigned integer or -1" msgstr "" #: src/conf/domain_conf.c:7954 msgid "vcpu id value -1 is not allowed for vcpupin" msgstr "" #: src/conf/domain_conf.c:7961 msgid "vcpu id must be less than maxvcpus" msgstr "" #: src/conf/domain_conf.c:7983 #, fuzzy msgid "missing cpuset for vcpupin" msgstr "소스 호스트가 빠짐" #: src/conf/domain_conf.c:8103 msgid "missing domain type attribute" msgstr "도메인 유형 특성 빠" #: src/conf/domain_conf.c:8109 #, c-format msgid "invalid domain type %s" msgstr "잘못된 도메인 유형 %s" #: src/conf/domain_conf.c:8117 #, fuzzy, c-format msgid "unexpected domain type %s, expecting %s" msgstr "예기치 못한 도메인 유형 %d" #: src/conf/domain_conf.c:8142 #, fuzzy, c-format msgid "unexpected domain type %s, expecting one of these: %s" msgstr "예기치 못한 cpu 인덱스 %d 기대값 %d" #: src/conf/domain_conf.c:8166 src/conf/network_conf.c:981 #: src/conf/secret_conf.c:180 src/openvz/openvz_conf.c:1102 #: src/xenxs/xen_xm.c:219 msgid "Failed to generate UUID" msgstr "UUID 생성 실패" #: src/conf/domain_conf.c:8173 src/conf/domain_conf.c:9430 #: src/conf/network_conf.c:988 src/conf/nwfilter_conf.c:2575 #: src/conf/secret_conf.c:186 src/conf/storage_conf.c:766 msgid "malformed uuid element" msgstr "잘못 구성된 uuid 요소" #: src/conf/domain_conf.c:8183 msgid "Domain title can't contain newlines" msgstr "" #: src/conf/domain_conf.c:8211 #, fuzzy, c-format msgid "current memory '%lluk' exceeds maximum '%lluk'" msgstr "보안 레이블이 최대값을 넘어감: %zd" #: src/conf/domain_conf.c:8235 #, fuzzy msgid "cannot extract blkiotune nodes" msgstr "비디오 장치를 추출할 수 없음" #: src/conf/domain_conf.c:8251 #, fuzzy, c-format msgid "duplicate device weight path '%s'" msgstr "지원하지 않는 장치 유형" #: src/conf/domain_conf.c:8279 msgid "maximum vcpus must be an integer" msgstr "" #: src/conf/domain_conf.c:8287 #, fuzzy, c-format msgid "invalid maxvcpus %lu" msgstr "잘못된 CPU 마스크 %s" #: src/conf/domain_conf.c:8295 msgid "current vcpus must be an integer" msgstr "" #: src/conf/domain_conf.c:8303 #, fuzzy, c-format msgid "invalid current vcpus %lu" msgstr "%s에 있는 잘못된 인수" #: src/conf/domain_conf.c:8309 #, c-format msgid "maxvcpus must not be less than current vcpus (%d < %lu)" msgstr "" #: src/conf/domain_conf.c:8320 #, fuzzy, c-format msgid "Unsupported CPU placement mode '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/conf/domain_conf.c:8375 msgid "vcpupin nodes must be less than maxvcpus" msgstr "" #: src/conf/domain_conf.c:8390 msgid "duplicate vcpupin for same vcpu" msgstr "" #: src/conf/domain_conf.c:8401 #, fuzzy msgid "cannot extract emulatorpin nodes" msgstr "비디오 장치를 추출할 수 없음" #: src/conf/domain_conf.c:8408 #, fuzzy msgid "only one emulatorpin is supported" msgstr "오직 하나의 파일시스템만 지원됨" #: src/conf/domain_conf.c:8431 #, fuzzy msgid "cannot extract numatune nodes" msgstr "비디오 장치를 추출할 수 없음" #: src/conf/domain_conf.c:8437 #, fuzzy msgid "only one numatune is supported" msgstr "오직 하나의 파일시스템만 지원됨" #: src/conf/domain_conf.c:8456 #, fuzzy, c-format msgid "Unsupported NUMA memory tuning mode '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/conf/domain_conf.c:8494 #, fuzzy, c-format msgid "Unsupported memory placement mode '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/conf/domain_conf.c:8516 msgid "nodeset for NUMA memory tuning must be set if 'placement' is 'static'" msgstr "" #: src/conf/domain_conf.c:8535 #, fuzzy, c-format msgid "unsupported XML element %s" msgstr "지원되지 않는 입력 버스 %s " #: src/conf/domain_conf.c:8561 #, c-format msgid "unexpected feature %s" msgstr "예기치 못한 특성 %s" #: src/conf/domain_conf.c:8590 #, c-format msgid "unknown clock offset '%s'" msgstr "알려지지 않은 클럭 오프셋 '%s'" #: src/conf/domain_conf.c:8608 #, fuzzy, c-format msgid "unknown clock adjustment '%s'" msgstr "알려지지 않은 클럭 오프셋 '%s'" #: src/conf/domain_conf.c:8636 #, fuzzy, c-format msgid "unknown clock basis '%s'" msgstr "알려지지 않은 클럭 오프셋 '%s'" #: src/conf/domain_conf.c:8649 msgid "missing 'timezone' attribute for clock with offset='timezone'" msgstr "offset='timezone'으로 지정한 클럭의 'timezone' 특성 빠" #: src/conf/domain_conf.c:8682 msgid "no OS type" msgstr "OS 유형 아님" #: src/conf/domain_conf.c:8709 #, fuzzy, c-format msgid "No guest options available for arch '%s'" msgstr "%s에 대해 사용 가능한 하이퍼바이저 드라이버가 없음" #: src/conf/domain_conf.c:8718 #, fuzzy, c-format msgid "No os type '%s' available for arch '%s'" msgstr "도메인에서 사용 가능한 콘솔이 없음\n" #: src/conf/domain_conf.c:8726 src/xenxs/xen_xm.c:295 #, c-format msgid "no supported architecture for os type '%s'" msgstr "os 유형 '%s'에 대해 지원되지 않는 아키텍쳐" #: src/conf/domain_conf.c:8767 #, fuzzy msgid "init binary must be specified" msgstr "컨테이너 ID가 지정되지 않았습니다" #: src/conf/domain_conf.c:8783 msgid "No data supplied for element" msgstr "" #: src/conf/domain_conf.c:8857 src/conf/domain_conf.c:8865 msgid "Can't add another USB controller: USB is disabled for this domain" msgstr "" #: src/conf/domain_conf.c:8886 #, fuzzy msgid "cannot extract device leases" msgstr "디스크 장치를 추출할 수 없음" #: src/conf/domain_conf.c:9017 #, fuzzy msgid "cannot extract console devices" msgstr "컨트롤러 장치를 추출할 수 없음" #: src/conf/domain_conf.c:9054 msgid "Only the first console can be a serial port" msgstr "" #: src/conf/domain_conf.c:9150 msgid "Can't add USB input device. USB bus is disabled" msgstr "" #: src/conf/domain_conf.c:9255 msgid "cannot determine default video type" msgstr "기본 비디오 유형을 결정할 수 없음" #: src/conf/domain_conf.c:9284 msgid "Can't add host USB device: USB is disabled in this host" msgstr "" #: src/conf/domain_conf.c:9300 msgid "only a single watchdog device is supported" msgstr "와치독 장치는 한개만 지원합니다" #: src/conf/domain_conf.c:9320 #, fuzzy msgid "only a single memory balloon device is supported" msgstr "와치독 장치는 한개만 지원합니다" #: src/conf/domain_conf.c:9360 msgid "Can't add USB hub: USB is disabled for this domain" msgstr "" #: src/conf/domain_conf.c:9383 msgid "Can't add redirected USB device: USB is disabled for this domain" msgstr "" #: src/conf/domain_conf.c:9406 msgid "Maximum CPUs greater than topology limit" msgstr "" #: src/conf/domain_conf.c:9412 msgid "Number of CPUs in exceeds the count" msgstr "" #: src/conf/domain_conf.c:9437 msgid "UUID mismatch between and " msgstr "" #: src/conf/domain_conf.c:9449 #, fuzzy, c-format msgid "unknown smbios mode '%s'" msgstr "알려지지 않은 사운드 모델: '%s' " #: src/conf/domain_conf.c:9516 msgid "no domain config" msgstr "도메인 설정 없음" #: src/conf/domain_conf.c:9530 msgid "missing domain state" msgstr "도메인 상태 빠짐" #: src/conf/domain_conf.c:9535 #, c-format msgid "invalid domain state '%s'" msgstr "잘못된 도메인 상태 '%s'" #: src/conf/domain_conf.c:9544 #, fuzzy, c-format msgid "invalid domain state reason '%s'" msgstr "잘못된 도메인 상태 '%s'" #: src/conf/domain_conf.c:9555 msgid "invalid pid" msgstr "잘못된 pid" #: src/conf/domain_conf.c:9569 #, fuzzy, c-format msgid "Unknown taint flag %s" msgstr "알려지지 않은 유형 '%s'" #: src/conf/domain_conf.c:9603 src/security/virt-aa-helper.c:654 #: tools/virsh-domain-monitor.c:97 tools/virsh-domain-monitor.c:439 #: tools/virsh-domain-monitor.c:543 tools/virsh-domain-monitor.c:655 #: tools/virsh-domain.c:1868 tools/virsh-domain.c:2485 #: tools/virsh-domain.c:7066 tools/virsh-domain.c:7229 #: tools/virsh-domain.c:7291 tools/virsh-domain.c:7511 #: tools/virsh-domain.c:7788 tools/virsh-domain.c:7893 #, fuzzy msgid "(domain_definition)" msgstr "도메인 정보" #: src/conf/domain_conf.c:9641 #, fuzzy, c-format msgid "unexpected root element <%s>, expecting " msgstr "예기치 못한 도메인 유형 %d" #: src/conf/domain_conf.c:9674 #, fuzzy, c-format msgid "unexpected root element <%s>, expecting " msgstr "예기치 못한 도메인 유형 %d" #: src/conf/domain_conf.c:9724 #, fuzzy, c-format msgid "Target timer %s does not match source %s" msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #: src/conf/domain_conf.c:9732 #, c-format msgid "Target timer presence %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:9740 #, c-format msgid "Target TSC frequency %lu does not match source %lu" msgstr "" #: src/conf/domain_conf.c:9747 #, c-format msgid "Target TSC mode %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:9768 #, c-format msgid "Target device address type %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:9781 #, c-format msgid "" "Target device PCI address %04x:%02x:%02x.%02x does not match source %04x:" "%02x:%02x.%02x" msgstr "" #: src/conf/domain_conf.c:9795 #, c-format msgid "Target device drive address %d:%d:%d does not match source %d:%d:%d" msgstr "" #: src/conf/domain_conf.c:9809 #, c-format msgid "" "Target device virtio serial address %d:%d:%d does not match source %d:%d:%d" msgstr "" #: src/conf/domain_conf.c:9822 #, c-format msgid "Target device ccid address %d:%d does not match source %d:%d" msgstr "" #: src/conf/domain_conf.c:9846 #, fuzzy, c-format msgid "Target disk device %s does not match source %s" msgstr "udev가 장치 '%s'에는 특성 '%s'가 없다고 보고합니다" #: src/conf/domain_conf.c:9854 #, c-format msgid "Target disk bus %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:9862 #, c-format msgid "Target disk %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:9869 #, c-format msgid "Target disk serial %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:9876 msgid "Target disk access mode does not match source" msgstr "" #: src/conf/domain_conf.c:9897 #, fuzzy, c-format msgid "Target controller type %s does not match source %s" msgstr "풀 유형 '%s'는 소스 발견을 지원하지 않습니다" #: src/conf/domain_conf.c:9905 #, c-format msgid "Target controller index %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:9912 #, c-format msgid "Target controller model %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:9920 #, c-format msgid "Target controller ports %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:9927 #, c-format msgid "Target controller vectors %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:9950 #, fuzzy, c-format msgid "Target filesystem guest target %s does not match source %s" msgstr "저장 풀(pool) 설정 파일이름 '%s'는 풀 이름 '%s'에 부합되지 않습니다" #: src/conf/domain_conf.c:9957 msgid "Target filesystem access mode does not match source" msgstr "" #: src/conf/domain_conf.c:9978 #, c-format msgid "" "Target network card mac %02x:%02x:%02x:%02x:%02x:%02xdoes not match source " "%02x:%02x:%02x:%02x:%02x:%02x" msgstr "" #: src/conf/domain_conf.c:9989 #, fuzzy, c-format msgid "Target network card model %s does not match source %s" msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #: src/conf/domain_conf.c:10011 #, c-format msgid "Target input device type %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:10019 #, fuzzy, c-format msgid "Target input device bus %s does not match source %s" msgstr "udev가 장치 '%s'에는 특성 '%s'가 없다고 보고합니다" #: src/conf/domain_conf.c:10042 #, fuzzy, c-format msgid "Target sound card model %s does not match source %s" msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #: src/conf/domain_conf.c:10065 #, c-format msgid "Target video card model %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:10073 #, c-format msgid "Target video card vram %u does not match source %u" msgstr "" #: src/conf/domain_conf.c:10080 #, c-format msgid "Target video card heads %u does not match source %u" msgstr "" #: src/conf/domain_conf.c:10088 msgid "Target video card acceleration does not match source" msgstr "" #: src/conf/domain_conf.c:10095 #, c-format msgid "Target video card 2d accel %u does not match source %u" msgstr "" #: src/conf/domain_conf.c:10102 #, c-format msgid "Target video card 3d accel %u does not match source %u" msgstr "" #: src/conf/domain_conf.c:10125 #, fuzzy, c-format msgid "Target host device mode %s does not match source %s" msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #: src/conf/domain_conf.c:10134 #, c-format msgid "Target host device subsystem %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:10173 src/conf/domain_conf.c:10195 #, c-format msgid "Target serial port %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10217 #, fuzzy, c-format msgid "Target channel type %s does not match source %s" msgstr "풀 유형 '%s'는 소스 발견을 지원하지 않습니다" #: src/conf/domain_conf.c:10227 #, fuzzy, c-format msgid "Target channel name %s does not match source %s" msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #: src/conf/domain_conf.c:10236 msgid "" "Changing device type to/from spicevmc would change default target channel " "name" msgstr "" #: src/conf/domain_conf.c:10247 #, c-format msgid "Target channel addr %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:10273 #, fuzzy, c-format msgid "Target console type %s does not match source %s" msgstr "풀 유형 '%s'는 소스 발견을 지원하지 않습니다" #: src/conf/domain_conf.c:10296 #, fuzzy, c-format msgid "Target watchdog model %s does not match source %s" msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #: src/conf/domain_conf.c:10319 #, fuzzy, c-format msgid "Target balloon model %s does not match source %s" msgstr "저장 풀(pool) 설정 파일이름 '%s'는 풀 이름 '%s'에 부합되지 않습니다" #: src/conf/domain_conf.c:10342 #, fuzzy, c-format msgid "Target hub device type %s does not match source %s" msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #: src/conf/domain_conf.c:10370 #, c-format msgid "Target domain virt type %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:10382 #, c-format msgid "Target domain uuid %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:10389 #, fuzzy, c-format msgid "Target domain max memory %lld does not match source %lld" msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #: src/conf/domain_conf.c:10395 #, fuzzy, c-format msgid "Target domain current memory %lld does not match source %lld" msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #: src/conf/domain_conf.c:10401 #, fuzzy, c-format msgid "Target domain huge page backing %d does not match source %d" msgstr "풀 유형 '%s'는 소스 발견을 지원하지 않습니다" #: src/conf/domain_conf.c:10409 #, c-format msgid "Target domain vpu count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10415 #, c-format msgid "Target domain vpu max %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10422 src/conf/domain_conf.c:10434 #, c-format msgid "Target domain OS type %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:10428 #, c-format msgid "Target domain architecture %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:10441 #, c-format msgid "Target domain SMBIOS mode %s does not match source %s" msgstr "" #: src/conf/domain_conf.c:10449 #, c-format msgid "Target domain features %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10456 msgid "Target domain timers do not match source" msgstr "" #: src/conf/domain_conf.c:10473 #, c-format msgid "Target domain disk count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10484 #, c-format msgid "Target domain disk controller count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10495 #, c-format msgid "Target domain filesystem count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10506 #, c-format msgid "Target domain net card count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10517 #, c-format msgid "Target domain input device count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10528 #, c-format msgid "Target domain sound card count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10539 #, c-format msgid "Target domain video card count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10550 #, c-format msgid "Target domain host device count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10561 #, c-format msgid "Target domain smartcard count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10572 #, c-format msgid "Target domain serial port count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10583 #, c-format msgid "Target domain parallel port count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10594 #, c-format msgid "Target domain channel count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10605 #, c-format msgid "Target domain console count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10616 #, fuzzy, c-format msgid "Target domain hub device count %d does not match source %d" msgstr "udev가 장치 '%s'에는 특성 '%s'가 없다고 보고합니다" #: src/conf/domain_conf.c:10629 #, c-format msgid "Target domain watchdog count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10641 #, c-format msgid "Target domain memory balloon count %d does not match source %d" msgstr "" #: src/conf/domain_conf.c:10988 msgid "topology cpuset syntax error" msgstr "토폴로지 cpuset 구문 오류" #: src/conf/domain_conf.c:11226 #, c-format msgid "unexpected lifecycle type %d" msgstr "예기치 못한 생명주기 유형 %d" #: src/conf/domain_conf.c:11367 #, c-format msgid "unexpected disk type %d" msgstr "예기치 못한 디스크 타입 %d" #: src/conf/domain_conf.c:11372 #, c-format msgid "unexpected disk device %d" msgstr "예기치 못한 디스크 장치 %d" #: src/conf/domain_conf.c:11377 #, c-format msgid "unexpected disk bus %d" msgstr "예기치 못한 디스크 버스 %d" #: src/conf/domain_conf.c:11382 #, c-format msgid "unexpected disk cache mode %d" msgstr "예기치 못한 디스크 캐시 모드 %d" #: src/conf/domain_conf.c:11387 #, fuzzy, c-format msgid "unexpected disk io mode %d" msgstr "예기치 못한 디스크 캐시 모드 %d" #: src/conf/domain_conf.c:11627 #, c-format msgid "unexpected controller type %d" msgstr "예기치 못한 컨트롤러 유형 %d" #: src/conf/domain_conf.c:11636 #, fuzzy, c-format msgid "unexpected model type %d" msgstr "예기치 못한 hostdev 유형 %d" #: src/conf/domain_conf.c:11705 #, c-format msgid "unexpected filesystem type %d" msgstr "예기치 못한 파일시스템 유형 %d" #: src/conf/domain_conf.c:11711 #, fuzzy, c-format msgid "unexpected accessmode %d" msgstr "예기치 못한 디스크 캐시 모드 %d" #: src/conf/domain_conf.c:11811 #, fuzzy msgid "PCI address Formatting failed" msgstr "재개 동작이 실패했습니다" #: src/conf/domain_conf.c:11829 src/conf/domain_conf.c:12893 #: src/qemu/qemu_hotplug.c:2152 #, c-format msgid "unexpected hostdev type %d" msgstr "예기치 못한 hostdev 유형 %d" #: src/conf/domain_conf.c:11853 src/conf/domain_conf.c:11923 #: src/conf/domain_conf.c:12691 #, c-format msgid "unexpected net type %d" msgstr "예기치 못한 net 유형 %d" #: src/conf/domain_conf.c:11880 #, fuzzy, c-format msgid "unexpected source mode %d" msgstr "예기치 못한 사운드 모델 %d" #: src/conf/domain_conf.c:11898 #, fuzzy, c-format msgid "unexpected net type %s" msgstr "예기치 못한 net 유형 %d" #: src/conf/domain_conf.c:12088 #, c-format msgid "unexpected char type %d" msgstr "예기치 못한 char 유형 %d" #: src/conf/domain_conf.c:12189 #, fuzzy, c-format msgid "unexpected char device type %d" msgstr "예기치 못한 문자 장치 유형" #: src/conf/domain_conf.c:12208 #, fuzzy msgid "Could not format channel target type" msgstr "현재 시간을 얻을 수 없음" #: src/conf/domain_conf.c:12218 msgid "Unable to format guestfwd port" msgstr "guestfwd 포트를 초기화할 수 없음" #: src/conf/domain_conf.c:12278 src/conf/domain_conf.c:12309 #: src/qemu/qemu_command.c:5474 #, fuzzy, c-format msgid "unexpected smartcard type %d" msgstr "예기치 못한 char 유형 %d" #: src/conf/domain_conf.c:12326 #, fuzzy, c-format msgid "unexpected codec type %d" msgstr "예기치 못한 hostdev 유형 %d" #: src/conf/domain_conf.c:12346 src/xenxs/xen_sxpr.c:2159 #, c-format msgid "unexpected sound model %d" msgstr "예기치 못한 사운드 모델 %d" #: src/conf/domain_conf.c:12388 #, fuzzy, c-format msgid "unexpected memballoon model %d" msgstr "예기치 못한 사운드 모델 %d" #: src/conf/domain_conf.c:12428 #, c-format msgid "unexpected watchdog model %d" msgstr "예기치 못한 와치독 모델 %d" #: src/conf/domain_conf.c:12434 #, c-format msgid "unexpected watchdog action %d" msgstr "예기치 못한 와치독 동작 %d" #: src/conf/domain_conf.c:12475 #, c-format msgid "unexpected video model %d" msgstr "예기치 못한 비디오 모델 %d" #: src/conf/domain_conf.c:12512 src/xenxs/xen_sxpr.c:2196 #, c-format msgid "unexpected input type %d" msgstr "예기치 못한 입력 타입 %d" #: src/conf/domain_conf.c:12517 #, c-format msgid "unexpected input bus type %d" msgstr "예기치 못한 입력 버스 유형 %d" #: src/conf/domain_conf.c:12545 #, fuzzy, c-format msgid "unexpected timer name %d" msgstr "예기치 못한 비디오 모델 %d" #: src/conf/domain_conf.c:12561 #, fuzzy, c-format msgid "unexpected timer tickpolicy %d" msgstr "예상치 못한 CPU 매치 정책 %d" #: src/conf/domain_conf.c:12575 #, fuzzy, c-format msgid "unexpected timer track %d" msgstr "예기치 못한 특성 %d" #: src/conf/domain_conf.c:12593 #, fuzzy, c-format msgid "unexpected timer mode %d" msgstr "예기치 못한 비디오 모델 %d" #: src/conf/domain_conf.c:12884 #, c-format msgid "unexpected hostdev mode %d" msgstr "예기치 못한 hostdev 모드 %d" #: src/conf/domain_conf.c:12944 #, fuzzy, c-format msgid "unexpected hub type %d" msgstr "예기치 못한 char 유형 %d" #: src/conf/domain_conf.c:12997 #, c-format msgid "unexpected domain type %d" msgstr "예기치 못한 도메인 유형 %d" #: src/conf/domain_conf.c:13170 #, fuzzy msgid "failed to format cpuset for vcpupin" msgstr "읽기 용 %s 열기 실패" #: src/conf/domain_conf.c:13187 #, fuzzy msgid "failed to format cpuset for emulator" msgstr "읽기 용 %s 열기 실패" #: src/conf/domain_conf.c:13217 #, fuzzy msgid "failed to format nodeset for NUMA memory tuning" msgstr "읽기 용 %s 열기 실패" #: src/conf/domain_conf.c:13280 #, c-format msgid "unexpected boot device type %d" msgstr "예기치 못한 부트 장치 유형 %d" #: src/conf/domain_conf.c:13308 #, fuzzy, c-format msgid "unexpected smbios mode %d" msgstr "예기치 못한 사운드 모델 %d" #: src/conf/domain_conf.c:13323 #, c-format msgid "unexpected feature %d" msgstr "예기치 못한 특성 %d" #: src/conf/domain_conf.c:13628 msgid "Device configuration is not compatible: Domain has no USB bus support" msgstr "" #: src/conf/domain_conf.c:13648 src/conf/network_conf.c:1724 #: src/conf/nwfilter_conf.c:2728 src/util/dnsmasq.c:529 #, c-format msgid "cannot create config directory '%s'" msgstr "설정 디렉터리 '%s'를 만들 수 없음" #: src/conf/domain_conf.c:13793 #, c-format msgid "unexpected domain %s already exists" msgstr "예기치 못한 도메인 %s가 이미 존재함" #: src/conf/domain_conf.c:13831 src/conf/network_conf.c:1824 #: src/conf/nwfilter_conf.c:3118 src/conf/storage_conf.c:1587 #, c-format msgid "Failed to open dir '%s'" msgstr "디렉터리 '%s'를 여는 데 실패" #: src/conf/domain_conf.c:13895 #, c-format msgid "cannot remove config %s" msgstr "설정 %s를 제거하는 데 실패" #: src/conf/domain_conf.c:14001 src/xen/xm_internal.c:1116 #, c-format msgid "domain '%s' is already defined with uuid %s" msgstr "도메인 '%s'가 uuid %s로 이미 정의되어 있습니다" #: src/conf/domain_conf.c:14010 #, c-format msgid "domain is already active as '%s'" msgstr "도메인이 이미 '%s'로 활성화되어 있습니다" #: src/conf/domain_conf.c:14024 #, c-format msgid "domain '%s' already exists with uuid %s" msgstr "이미 %s 도메인이 이미 uuid %s로 존재함" #: src/conf/domain_conf.c:14254 #, fuzzy, c-format msgid "unknown disk format '%s' for %s" msgstr "알 수 없는 디스크 유형 '%s'" #: src/conf/domain_conf.c:14263 src/qemu/qemu_driver.c:9223 #, c-format msgid "no disk format for %s and probing is disabled" msgstr "" #: src/conf/domain_conf.c:14280 #, c-format msgid "backing store for %s is self-referential" msgstr "" #: src/conf/domain_conf.c:14292 #, fuzzy, c-format msgid "unable to open disk path %s" msgstr "모니터 경로 %s를 열 수 없음" #: src/conf/domain_conf.c:14305 #, fuzzy, c-format msgid "could not close file %s" msgstr "파일 '%s'를 닫을 수 없음" #: src/conf/domain_conf.c:14409 #, fuzzy, c-format msgid "invalid domain state: %d" msgstr "잘못된 도메인 상태 '%s'" #: src/conf/domain_conf.c:14841 #, c-format msgid "Copying definition of '%d' type is not implemented yet." msgstr "" #: src/conf/domain_event.c:196 src/conf/domain_event.c:246 msgid "could not find event callback for removal" msgstr "제거에 대한 이벤트 콜백을 찾을 수 없음" #: src/conf/domain_event.c:272 src/conf/domain_event.c:297 msgid "could not find event callback for deletion" msgstr "삭제에 대한 이벤트 콜백을 찾을 수 없음" #: src/conf/domain_event.c:372 msgid "event callback already tracked" msgstr "이벤트 콜백이 이미 추적되었습니다" #: src/conf/domain_event.c:620 #, fuzzy msgid "unable to initialize state mutex" msgstr "TLS 클라이언트를 초기화할 수 없음: %s" #: src/conf/domain_event.c:1456 src/conf/domain_event.c:1512 #, fuzzy msgid "could not initialize domain event timer" msgstr "도메인 상태를 얻는 데 실패" #: src/conf/interface_conf.c:122 msgid "interface has no name" msgstr "인터페이스에 이름이 없습니다" #: src/conf/interface_conf.c:138 msgid "interface mtu value is improper" msgstr "인터페이스 mtu 값이 적절하지 않습니다" #: src/conf/interface_conf.c:162 #, c-format msgid "unknown interface startmode %s" msgstr "알려지지 않은 인터페이스 startmode %s" #: src/conf/interface_conf.c:194 #, c-format msgid "unknown bonding mode %s" msgstr "알려지지 않은 본딩 모드 %s" #: src/conf/interface_conf.c:215 #, c-format msgid "unknown mii bonding carrier %s" msgstr "알려지지 않은 mii 본딩 캐리어 %s" #: src/conf/interface_conf.c:238 #, c-format msgid "unknown arp bonding validate %s" msgstr "알려지지 않은 arp 본딩 검증 %s" #: src/conf/interface_conf.c:264 #, c-format msgid "unknown dhcp peerdns value %s" msgstr "알려지지 않은 dhcp peerdns 값 %s" #: src/conf/interface_conf.c:290 msgid "Invalid ip address prefix value" msgstr "잘못된 ip 주소 접두어 값" #: src/conf/interface_conf.c:450 msgid "protocol misses the family attribute" msgstr "프로토콜에 패밀리 특성이 빠졌습니다" #: src/conf/interface_conf.c:469 #, c-format msgid "unsupported protocol family '%s'" msgstr "지원하지 않는 프로토콜 패밀리 '%s'" #: src/conf/interface_conf.c:543 msgid "bond has no interfaces" msgstr "본드에 인터페이스가 없습니다" #: src/conf/interface_conf.c:592 msgid "bond interface miimon freq missing or invalid" msgstr "본드터페이스 miimon freq 빠지거나 잘못됨" #: src/conf/interface_conf.c:600 msgid "bond interface miimon downdelay invalid" msgstr "본드 인터페이스 miimon downdelay가 잘못됨" #: src/conf/interface_conf.c:609 msgid "bond interface miimon updelay invalid" msgstr "본드 인터페이스 miimon updelay가 잘못됨" #: src/conf/interface_conf.c:628 msgid "bond interface arpmon interval missing or invalid" msgstr "본드 인터페이스 arpmon 간격이 빠지거나 잘못됨" #: src/conf/interface_conf.c:637 msgid "bond interface arpmon target missing" msgstr "본드 인터페이스 arpmon 타겟이 빠짐" #: src/conf/interface_conf.c:658 msgid "vlan interface misses the tag attribute" msgstr "vlan 인터페이스에 tag 특성이 빠졌습니다" #: src/conf/interface_conf.c:666 msgid "vlan interface misses name attribute" msgstr "vlan 인터페이스에 name 특성이 빠졌습니다" #: src/conf/interface_conf.c:683 msgid "interface misses the type attribute" msgstr "인터페이스에 type 특성이 빠졌습니다" #: src/conf/interface_conf.c:689 #, c-format msgid "unknown interface type %s" msgstr "알려지지 않은 인터페이스 유형 %s" #: src/conf/interface_conf.c:710 #, c-format msgid "interface has unsupported type '%s'" msgstr "인터페이스의 유형이 지원되지 않는 '%s'입니다" #: src/conf/interface_conf.c:747 msgid "bridge interface misses the bridge element" msgstr "브리지 인터페이스에 bridge 요소가 빠졌습니다" #: src/conf/interface_conf.c:759 #, c-format msgid "bridge interface stp should be on or off got %s" msgstr "브리지 인터페이스 stp는 on이나 off여야 하나, %s가 지정되었습니다" #: src/conf/interface_conf.c:790 msgid "bond interface misses the bond element" msgstr "본드 인터페이스에 bond 요소가 빠졌습니다" #: src/conf/interface_conf.c:811 msgid "vlan interface misses the vlan element" msgstr "vlan 인터페이스에 vlan 요소가 빠졌습니다" #: src/conf/interface_conf.c:839 #, fuzzy, c-format msgid "unexpected root element <%s>, expecting " msgstr "예기치 못한 도메인 유형 %d" #: src/conf/interface_conf.c:866 #, fuzzy msgid "(interface_definition)" msgstr "인터페이스 장치" #: src/conf/interface_conf.c:947 msgid "bond arp monitoring has no target" msgstr "본드 arp 모니터링에 타겟이 없습니다" #: src/conf/interface_conf.c:975 msgid "vlan misses the tag name" msgstr "vlan에 tag 이름이 빠졌습니다" #: src/conf/interface_conf.c:1057 msgid "virInterfaceDefFormat unknown startmode" msgstr "알려져 있지 않은 startmode virInterfaceDefFormat " #: src/conf/interface_conf.c:1071 msgid "virInterfaceDefFormat NULL def" msgstr "virInterfaceDefFormat NULL 정의" #: src/conf/interface_conf.c:1077 msgid "virInterfaceDefFormat missing interface name" msgstr "virInterfaceDefFormat 인터페이스 이름 빠짐" #: src/conf/interface_conf.c:1083 #, c-format msgid "unexpected interface type %d" msgstr "예기치 못한 인터페이스 유형 %d" #: src/conf/netdev_bandwidth_conf.c:42 src/conf/netdev_bandwidth_conf.c:109 #, fuzzy msgid "invalid argument supplied" msgstr "잘못된 인수" #: src/conf/netdev_bandwidth_conf.c:53 src/conf/netdev_bandwidth_conf.c:65 #: src/conf/netdev_bandwidth_conf.c:72 #, fuzzy, c-format msgid "could not convert %s" msgstr "파일 '%s'를 닫을 수 없음" #: src/conf/netdev_bandwidth_conf.c:59 #, fuzzy msgid "Missing mandatory average attribute" msgstr "도메인 유형 특성 빠" #: src/conf/netdev_bandwidth_conf.c:118 msgid "Only one child element allowed" msgstr "" #: src/conf/netdev_bandwidth_conf.c:126 msgid "Only one child element allowed" msgstr "" #: src/conf/netdev_vlan_conf.c:47 msgid "" "missing tag id - each must have at least one subelement" msgstr "" #: src/conf/netdev_vlan_conf.c:63 #, fuzzy msgid "missing or invalid vlan tag id attribute" msgstr "도메인 유형 특성 빠" #: src/conf/netdev_vlan_conf.c:68 #, c-format msgid "vlan tag id %lu too large (maximum 4095)" msgstr "" #: src/conf/netdev_vlan_conf.c:88 #, c-format msgid "" "invalid \"trunk='%s'\" in - trunk='yes' is required for more than one " "vlan tag" msgstr "" #: src/conf/netdev_vlan_conf.c:95 #, c-format msgid "invalid \"trunk='%s'\" in - must be yes or no" msgstr "" #: src/conf/netdev_vlan_conf.c:121 #, fuzzy msgid "missing vlan tag data" msgstr "도메인 상태 빠짐" #: src/conf/netdev_vport_profile_conf.c:60 #, fuzzy, c-format msgid "unknown virtualport type %s" msgstr "알려지지 않은 virt 유형 " #: src/conf/netdev_vport_profile_conf.c:67 #, fuzzy msgid "missing required virtualport type" msgstr "제품 빠짐" #: src/conf/netdev_vport_profile_conf.c:89 #, fuzzy msgid "cannot parse value of managerid parameter" msgstr "%s의 값 구문 분석 실패" #: src/conf/netdev_vport_profile_conf.c:94 #, fuzzy msgid "value of managerid out of range" msgstr "메타데이터 길이가 범위를 벗어남" #: src/conf/netdev_vport_profile_conf.c:106 #, fuzzy msgid "cannot parse value of typeid parameter" msgstr "%s의 값 구문 분석 실패" #: src/conf/netdev_vport_profile_conf.c:111 #, fuzzy msgid "value for typeid out of range" msgstr "메타데이터 길이가 범위를 벗어남" #: src/conf/netdev_vport_profile_conf.c:123 #, fuzzy msgid "cannot parse value of typeidversion parameter" msgstr "%s의 값 구문 분석 실패" #: src/conf/netdev_vport_profile_conf.c:128 #, fuzzy msgid "value of typeidversion out of range" msgstr "메타데이터 길이가 범위를 벗어남" #: src/conf/netdev_vport_profile_conf.c:138 #, fuzzy msgid "cannot parse instanceid parameter as a uuid" msgstr "vnc 포트 %s을(를) 구문 분석할 수 없음 " #: src/conf/netdev_vport_profile_conf.c:147 #, fuzzy msgid "profileid parameter too long" msgstr "설정 파일 이름이 너무 깂니다" #: src/conf/netdev_vport_profile_conf.c:154 #, fuzzy msgid "cannot parse interfaceid parameter as a uuid" msgstr "vnc 포트 %s을(를) 구문 분석할 수 없음 " #: src/conf/netdev_vport_profile_conf.c:167 #: src/util/virnetdevvportprofile.c:152 #, fuzzy msgid "cannot generate a random uuid for instanceid" msgstr "컨테이너에 대한 eth 이름을 생성할 수 없음" #: src/conf/netdev_vport_profile_conf.c:177 #: src/util/virnetdevvportprofile.c:173 #, fuzzy msgid "cannot generate a random uuid for interfaceid" msgstr "컨테이너에 대한 eth 이름을 생성할 수 없음" #: src/conf/network_conf.c:412 #, fuzzy, c-format msgid "Invalid dhcp range '%s' to '%s' in network '%s'" msgstr "dhcp 범위 '%s' 에서 '%s'까지는 잘못됨" #: src/conf/network_conf.c:438 #, fuzzy, c-format msgid "Cannot parse MAC address '%s' in network '%s'" msgstr "MAC 주소 '%s'를 구문분석 할 수 없음" #: src/conf/network_conf.c:445 #, fuzzy, c-format msgid "expected unicast mac address, found multicast '%s' in network '%s'" msgstr "이름 주소 '%s'를 사용할 수 없음" #: src/conf/network_conf.c:454 #, fuzzy, c-format msgid "Cannot use name address '%s' in network '%s'" msgstr "이름 주소 '%s'를 사용할 수 없음" #: src/conf/network_conf.c:465 #, c-format msgid "Static host definition in network '%s' must have mac or name attribute" msgstr "" #: src/conf/network_conf.c:473 #, c-format msgid "Missing IP address in static host definition for network '%s'" msgstr "" #: src/conf/network_conf.c:535 msgid "Missing IP address in DNS host definition" msgstr "" #: src/conf/network_conf.c:596 #, fuzzy msgid "Missing required service attribute in dns srv record" msgstr "CPU 토플로지에 'threads' 특성이 빠져있습니다" #: src/conf/network_conf.c:602 #, fuzzy, c-format msgid "Service name is too long, limit is %d bytes" msgstr "%s 명령어가 너무 길어서 보낼 수 없습니다 (%d 바이트)" #: src/conf/network_conf.c:609 #, fuzzy, c-format msgid "Missing required protocol attribute in dns srv record '%s'" msgstr "%s에 있는 root 장치 정보 부재" #: src/conf/network_conf.c:616 #, fuzzy, c-format msgid "Invalid protocol attribute value '%s'" msgstr "도메인 저장 파일에 대해 잘못된 상태 경로 '%s'" #: src/conf/network_conf.c:693 #, fuzzy msgid "Missing required name attribute in dns txt record" msgstr "CPU 토플로지에 'threads' 특성이 빠져있습니다" #: src/conf/network_conf.c:698 #, fuzzy, c-format msgid "Missing required value attribute in dns txt record '%s'" msgstr "%s에 있는 root 장치 정보 부재" #: src/conf/network_conf.c:704 #, c-format msgid "spaces are not allowed in DNS TXT record names (name is '%s')" msgstr "" #: src/conf/network_conf.c:777 #, c-format msgid "Bad address '%s' in definition of network '%s'" msgstr "" #: src/conf/network_conf.c:789 #, fuzzy, c-format msgid "no family specified for non-IPv4 address '%s' in network '%s'" msgstr "이름 주소 '%s'를 사용할 수 없음" #: src/conf/network_conf.c:796 #, c-format msgid "family 'ipv4' specified for non-IPv4 address '%s' in network '%s'" msgstr "" #: src/conf/network_conf.c:803 #, c-format msgid "family 'ipv6' specified for non-IPv6 address '%s' in network '%s'" msgstr "" #: src/conf/network_conf.c:809 #, c-format msgid "Unrecognized family '%s' in definition of network '%s'" msgstr "" #: src/conf/network_conf.c:819 #, c-format msgid "netmask specified without address in network '%s'" msgstr "" #: src/conf/network_conf.c:826 #, c-format msgid "netmask not supported for address '%s' in network '%s' (IPv4 only)" msgstr "" #: src/conf/network_conf.c:834 #, fuzzy, c-format msgid "network '%s' cannot have both prefix='%u' and a netmask" msgstr "네트워크 '%s'가 브리지 이름을 가지고 있지 않습니다." #: src/conf/network_conf.c:844 #, c-format msgid "" "network '%s' has invalid netmask '%s' for address '%s' (both must be IPv4)" msgstr "" #: src/conf/network_conf.c:1017 #, c-format msgid "Invalid bridge mac address '%s' in network '%s'" msgstr "" #: src/conf/network_conf.c:1024 #, fuzzy, c-format msgid "Invalid multicast bridge mac address '%s' in network '%s'" msgstr "이름 주소 '%s'를 사용할 수 없음" #: src/conf/network_conf.c:1102 #, c-format msgid "unknown forwarding type '%s'" msgstr "알려지지 않은 포워딩 유형 '%s'" #: src/conf/network_conf.c:1125 msgid "No interface pool or SRIOV physical device given" msgstr "" #: src/conf/network_conf.c:1131 msgid "Address and interface attributes are mutually exclusive" msgstr "" #: src/conf/network_conf.c:1137 msgid "" "Address/interface attributes and Physical function are mutually exclusive " msgstr "" #: src/conf/network_conf.c:1149 msgid "A forward Dev should not be used when using a SRIOV PF" msgstr "" #: src/conf/network_conf.c:1156 #, fuzzy, c-format msgid "Missing required dev attribute in network '%s' pf element" msgstr "%s에 있는 root 장치 정보 부재" #: src/conf/network_conf.c:1166 msgid "Use of more than one physical interface is not allowed" msgstr "" #: src/conf/network_conf.c:1179 msgid "A forward Dev should not be used when using address attribute" msgstr "" #: src/conf/network_conf.c:1236 #, fuzzy, c-format msgid "" "Missing required dev attribute in network '%s' forward interface element" msgstr "%s에 있는 root 장치 정보 부재" #: src/conf/network_conf.c:1246 #, c-format msgid "" "forward dev '%s' must match first interface element dev '%s' in network '%s'" msgstr "" #: src/conf/network_conf.c:1275 #, fuzzy, c-format msgid "%s forwarding requested, but no IP address provided for network '%s'" msgstr "포워딩이 요청되었지만, IPv4 주소/넷마스크가 제공되지 않았습니다" #: src/conf/network_conf.c:1282 #, c-format msgid "" "multiple forwarding interfaces specified for network '%s', only one is " "supported" msgstr "" #: src/conf/network_conf.c:1294 #, c-format msgid "bridge name not allowed in %s mode (network '%s')" msgstr "" #: src/conf/network_conf.c:1303 #, c-format msgid "" "bridge delay/stp options only allowed in route, nat, and isolated mode, not " "in %s (network '%s')" msgstr "" #: src/conf/network_conf.c:1334 #, fuzzy msgid "(network_definition)" msgstr "XML에 있는 네트워크 정보" #: src/conf/network_conf.c:1361 #, fuzzy, c-format msgid "unexpected root element <%s>, expecting " msgstr "예기치 못한 도메인 유형 %d" #: src/conf/network_conf.c:1586 #, fuzzy, c-format msgid "Unknown forward type %d in network '%s'" msgstr "알려지지 않은 포워딩 유형 '%s'" #: src/conf/network_conf.c:1778 #, c-format msgid "Network config filename '%s' does not match network name '%s'" msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #: src/conf/network_conf.c:1871 src/util/dnsmasq.c:266 #, c-format msgid "cannot remove config file '%s'" msgstr "'%s' 설정 파일을 제거할 수 없음" #: src/conf/network_conf.c:1940 #, c-format msgid "Bridge generation exceeded max id %d" msgstr "브리지 생성이 최대 id %d를 넘어갔습니다" #: src/conf/network_conf.c:1958 #, c-format msgid "bridge name '%s' already in use." msgstr "브리지 이름 '%s'가 이미 사용중." #: src/conf/network_conf.c:2013 #, fuzzy, c-format msgid "network '%s' is already defined with uuid %s" msgstr "도메인 '%s'가 uuid %s로 이미 정의되어 있습니다" #: src/conf/network_conf.c:2022 #, fuzzy, c-format msgid "network is already active as '%s'" msgstr "네트워크가 이미 동작함" #: src/conf/network_conf.c:2036 #, fuzzy, c-format msgid "network '%s' already exists with uuid %s" msgstr "이미 %s 도메인이 이미 uuid %s로 존재함" #: src/conf/node_device_conf.c:558 #, c-format msgid "no block device path supplied for '%s'" msgstr "'%s'에 대한 블럭 장치 경로가 제공되지 않았습니다" #: src/conf/node_device_conf.c:578 #, c-format msgid "missing storage capability type for '%s'" msgstr "'%s'에 대한 저장 기능 유형이 빠짐" #: src/conf/node_device_conf.c:600 #, c-format msgid "no removable media size supplied for '%s'" msgstr "'%s'의 이동식 매체 크기가 제공되지 않음" #: src/conf/node_device_conf.c:601 #, c-format msgid "invalid removable media size supplied for '%s'" msgstr "'%s'의 이동식 매체 크기가 잘못됨" #: src/conf/node_device_conf.c:611 #, c-format msgid "unknown storage capability type '%s' for '%s'" msgstr "저장 기능 유형 '%s'가('%s'에 대해) 알려지지 않음" #: src/conf/node_device_conf.c:623 #, c-format msgid "no size supplied for '%s'" msgstr "'%s'에 대한 크기가 지정되지 않았습니다" #: src/conf/node_device_conf.c:624 #, c-format msgid "invalid size supplied for '%s'" msgstr "'%s'에 대해 잘못된 크기가 지정되었습니다" #: src/conf/node_device_conf.c:650 src/conf/node_device_conf.c:727 #, c-format msgid "no SCSI host ID supplied for '%s'" msgstr "'%s'에 대해 SCSI 호스트 ID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:651 src/conf/node_device_conf.c:728 #, c-format msgid "invalid SCSI host ID supplied for '%s'" msgstr "'%s'에 대해 잘못된 SCSI 호스트 ID가 지정되었습니다" #: src/conf/node_device_conf.c:656 #, c-format msgid "no SCSI bus ID supplied for '%s'" msgstr "'%s'에 대해 SCSI 버스 ID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:657 #, c-format msgid "invalid SCSI bus ID supplied for '%s'" msgstr "'%s'에 대해 잘못된 SCSI 버스 ID가 지정되었습니다" #: src/conf/node_device_conf.c:662 #, c-format msgid "no SCSI target ID supplied for '%s'" msgstr "'%s'에 대해 SCSI 타겟 ID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:663 #, c-format msgid "invalid SCSI target ID supplied for '%s'" msgstr "'%s'에 대해 잘못된 SCSI 타겟 ID가 지정되었습니다" #: src/conf/node_device_conf.c:668 #, c-format msgid "no SCSI LUN ID supplied for '%s'" msgstr "'%s'에 대해 SCSI LUN ID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:669 #, c-format msgid "invalid SCSI LUN ID supplied for '%s'" msgstr "'%s'에 대해 잘못된 SCSI LUN ID가 지정되었습니다" #: src/conf/node_device_conf.c:696 #, c-format msgid "no target name supplied for '%s'" msgstr "'%s'에 대해 타겟 이름이 지정되지 않았습니다" #: src/conf/node_device_conf.c:741 #, c-format msgid "missing SCSI host capability type for '%s'" msgstr "'%s'에 대한 SISI 호스트 기능 유형 빠짐" #: src/conf/node_device_conf.c:764 #, fuzzy, c-format msgid "no WWNN supplied for '%s', and auto-generation failed" msgstr "'%s'에 대한 WWNN이 지정되지 않음" #: src/conf/node_device_conf.c:776 #, fuzzy, c-format msgid "no WWPN supplied for '%s', and auto-generation failed" msgstr "'%s'에 대한 WWPN이 지정되지 않음" #: src/conf/node_device_conf.c:787 #, c-format msgid "unknown SCSI host capability type '%s' for '%s'" msgstr "SCSI 호스트 기능 유형 '%s'가('%s'에 대한) 알려져 있지 않음" #: src/conf/node_device_conf.c:821 #, c-format msgid "no network interface supplied for '%s'" msgstr "'%s'에 대해 네트워크 인터페이스가 지정되지 않았습니다" #: src/conf/node_device_conf.c:836 #, c-format msgid "invalid network type supplied for '%s'" msgstr "'%s'에 대해 잘못된 네트워크 인터페이스가 지정되었습니다" #: src/conf/node_device_conf.c:863 #, c-format msgid "no USB interface number supplied for '%s'" msgstr "'%s'에 대해 USB 인터페이스 번호가 지정되지 않았습니다" #: src/conf/node_device_conf.c:864 #, c-format msgid "invalid USB interface number supplied for '%s'" msgstr "'%s'에 대해 잘못된 USB 인터페이스 번호가 지정되었습니다" #: src/conf/node_device_conf.c:869 #, c-format msgid "no USB interface class supplied for '%s'" msgstr "'%s'에 대해 USB 인터페이스 클래스가 지정되지 않았습니다" #: src/conf/node_device_conf.c:870 #, c-format msgid "invalid USB interface class supplied for '%s'" msgstr "'%s'에 대해 잘못된 USB 인터페이스 클래스가 지정되었습니다" #: src/conf/node_device_conf.c:875 #, c-format msgid "no USB interface subclass supplied for '%s'" msgstr "'%s'에 대해 USB 인터페이스 서브클래스가 지정되지 않았습니다" #: src/conf/node_device_conf.c:876 #, c-format msgid "invalid USB interface subclass supplied for '%s'" msgstr "'%s'에 대해 잘못된 USB 인터페이스 서브클래스가 지정되었습니다" #: src/conf/node_device_conf.c:881 #, c-format msgid "no USB interface protocol supplied for '%s'" msgstr "'%s'에 대해 USB 인터페이스 프로토콜이 지정되지 않았습니다" #: src/conf/node_device_conf.c:882 #, c-format msgid "invalid USB interface protocol supplied for '%s'" msgstr "'%s'에 대해 잘못된 USB 인터페이스 프로토콜이 지정되었습니다" #: src/conf/node_device_conf.c:930 #, c-format msgid "no USB bus number supplied for '%s'" msgstr "'%s'에 대해 USB 버스 번호가 지정되지 않았습니다" #: src/conf/node_device_conf.c:931 #, c-format msgid "invalid USB bus number supplied for '%s'" msgstr "'%s'에 대해 잘못된 USB 버스 번호가 지정되었습니다" #: src/conf/node_device_conf.c:936 #, c-format msgid "no USB device number supplied for '%s'" msgstr "'%s'에 대해 USB 장치 번호가 지정되지 않았습니다" #: src/conf/node_device_conf.c:937 #, c-format msgid "invalid USB device number supplied for '%s'" msgstr "'%s'에 대해 잘못된 USB 장치 번호가 지정되었습니다" #: src/conf/node_device_conf.c:942 #, c-format msgid "no USB vendor ID supplied for '%s'" msgstr "'%s'에 대해 USB 벤더 ID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:943 #, c-format msgid "invalid USB vendor ID supplied for '%s'" msgstr "'%s'에 대해 잘못된 USB 벤더 ID가 지정되었습니다" #: src/conf/node_device_conf.c:948 #, c-format msgid "no USB product ID supplied for '%s'" msgstr "'%s'에 대해 USB 상품 ID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:949 #, c-format msgid "invalid USB product ID supplied for '%s'" msgstr "'%s'에 대해 잘못된 USB 상품 ID가 지정되었습니다" #: src/conf/node_device_conf.c:975 #, c-format msgid "no PCI domain ID supplied for '%s'" msgstr "'%s'에 대해 PCI 도메인 ID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:976 #, c-format msgid "invalid PCI domain ID supplied for '%s'" msgstr "'%s'에 대해 잘못된 PCI 도메인 ID가 지정되었습니다" #: src/conf/node_device_conf.c:981 #, c-format msgid "no PCI bus ID supplied for '%s'" msgstr "'%s'에 대해 PCI 버스 ID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:982 #, c-format msgid "invalid PCI bus ID supplied for '%s'" msgstr "'%s'에 대해 잘못된 PCI 버스 ID가 지정되었습니다" #: src/conf/node_device_conf.c:987 #, c-format msgid "no PCI slot ID supplied for '%s'" msgstr "'%s'에 대해 PCI 슬롯 ID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:988 #, c-format msgid "invalid PCI slot ID supplied for '%s'" msgstr "'%s'에 대해 잘못된 PCI 슬롯 ID가 지정되었습니다" #: src/conf/node_device_conf.c:993 #, c-format msgid "no PCI function ID supplied for '%s'" msgstr "'%s'에 대해 PCI 기능 ID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:994 #, c-format msgid "invalid PCI function ID supplied for '%s'" msgstr "'%s'에 대해 잘못된 PCI 기능 ID가 지정되었습니다" #: src/conf/node_device_conf.c:999 #, c-format msgid "no PCI vendor ID supplied for '%s'" msgstr "'%s'에 대해 PCI 벤더 ID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:1000 #, c-format msgid "invalid PCI vendor ID supplied for '%s'" msgstr "'%s'에 대해 잘못된 PCI 벤더 ID가 지정되었습니다" #: src/conf/node_device_conf.c:1005 #, c-format msgid "no PCI product ID supplied for '%s'" msgstr "'%s'에 대해 PCI 제품 ID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:1006 #, c-format msgid "invalid PCI product ID supplied for '%s'" msgstr "'%s'에 대해 잘못된 PCI 제품 ID가 지정되었습니다" #: src/conf/node_device_conf.c:1040 #, c-format msgid "no system UUID supplied for '%s'" msgstr "'%s'에 대해 시스템 UUID가 지정되지 않았습니다" #: src/conf/node_device_conf.c:1046 #, c-format msgid "malformed uuid element for '%s'" msgstr "'%s'에 대해 잘못된 형식의 uuid 요소" #: src/conf/node_device_conf.c:1081 msgid "missing capability type" msgstr "기능 유형이 빠짐" #: src/conf/node_device_conf.c:1087 #, c-format msgid "unknown capability type '%s'" msgstr "알려지지 않은 기능 유형 '%s'" #: src/conf/node_device_conf.c:1127 #, c-format msgid "unknown capability type '%d' for '%s'" msgstr "기능 유형 '%d'가('%s'에 대해) 알려져 있지 않음" #: src/conf/node_device_conf.c:1185 #, c-format msgid "no device capabilities for '%s'" msgstr "'%s'에 대한 장치 기능이 없음" #: src/conf/node_device_conf.c:1223 #, fuzzy, c-format msgid "unexpected root element <%s> expecting " msgstr "예기치 못한 도메인 유형 %d" #: src/conf/node_device_conf.c:1252 #, fuzzy msgid "(node_device_definition)" msgstr "XML로 된 노드 장치 상세정보" #: src/conf/node_device_conf.c:1302 msgid "Device is not a fibre channel HBA" msgstr "장치가 광 채널 HBA가 아닙니다" #: src/conf/node_device_conf.c:1331 #, fuzzy, c-format msgid "Could not find parent device for '%s'" msgstr "'%s'에 대한 부모 HBA를 찾을 수 없습니다" #: src/conf/node_device_conf.c:1351 #, fuzzy, c-format msgid "Parent device %s is not capable of vport operations" msgstr "부모 HBA %s가 vport 기능을 포함하고 있지 않습니다" #: src/conf/nwfilter_conf.c:997 #, fuzzy msgid "ipset name is too long" msgstr "설정 파일 이름이 너무 깂니다" #: src/conf/nwfilter_conf.c:1003 #, fuzzy msgid "ipset name contains invalid characters" msgstr "모델 이름에 잘못된 문자가 들어있습니다" #: src/conf/nwfilter_conf.c:1035 #, fuzzy msgid "malformed ipset flags" msgstr "잘못된 형식의 크기 %s" #: src/conf/nwfilter_conf.c:2018 #, c-format msgid "%s has illegal value %s" msgstr "" #: src/conf/nwfilter_conf.c:2053 src/conf/nwfilter_conf.c:2321 #, fuzzy msgid "rule node requires action attribute" msgstr "
'function' 특성을 구문분석 할 수 없습니다" #: src/conf/nwfilter_conf.c:2328 msgid "unknown rule action attribute value" msgstr "" #: src/conf/nwfilter_conf.c:2335 msgid "rule node requires direction attribute" msgstr "" #: src/conf/nwfilter_conf.c:2342 #, fuzzy msgid "unknown rule direction attribute value" msgstr "
'function' 특성을 구문분석 할 수 없습니다" #: src/conf/nwfilter_conf.c:2419 #, c-format msgid "Name of chain is longer than %u characters" msgstr "" #: src/conf/nwfilter_conf.c:2427 #, fuzzy msgid "Chain name contains invalid characters" msgstr "모델 이름에 잘못된 문자가 들어있습니다" #: src/conf/nwfilter_conf.c:2464 #, c-format msgid "" "Invalid chain name '%s'. Please use a chain name called '%s' or any of the " "following prefixes: " msgstr "" #: src/conf/nwfilter_conf.c:2512 #, fuzzy msgid "filter has no name" msgstr "인터페이스에 이름이 없습니다" #: src/conf/nwfilter_conf.c:2520 #, fuzzy, c-format msgid "Could not parse chain priority '%s'" msgstr "usb 파일 %s를 구문분석 할 수 없음" #: src/conf/nwfilter_conf.c:2527 #, c-format msgid "Priority '%d' is outside valid range of [%d,%d]" msgstr "" #: src/conf/nwfilter_conf.c:2569 src/conf/storage_conf.c:760 #: src/storage/storage_backend.c:435 msgid "unable to generate uuid" msgstr "uuid 생성 불가능" #: src/conf/nwfilter_conf.c:2632 #, fuzzy msgid "unknown root element for nw filter" msgstr "저장 풀(pool)에 대한 알려져 있지 않은 루트 요소" #: src/conf/nwfilter_conf.c:2658 #, fuzzy msgid "(nwfilter_definition)" msgstr "인터페이스 장치" #: src/conf/nwfilter_conf.c:2996 #, c-format msgid "filter with same UUID but different name ('%s') already exists" msgstr "" #: src/conf/nwfilter_conf.c:3007 msgid "filter would introduce a loop" msgstr "" #: src/conf/nwfilter_conf.c:3083 #, fuzzy, c-format msgid "network filter config filename '%s' does not match name '%s'" msgstr "저장 풀(pool) 설정 파일이름 '%s'는 풀 이름 '%s'에 부합되지 않습니다" #: src/conf/nwfilter_conf.c:3160 src/conf/storage_conf.c:1637 #, c-format msgid "cannot create config directory %s" msgstr "설정 디렉터리 %s를 만들 수 없음" #: src/conf/nwfilter_conf.c:3173 src/conf/storage_conf.c:1656 msgid "failed to generate XML" msgstr "XML 생성하기 실패" #: src/conf/nwfilter_conf.c:3189 src/conf/storage_conf.c:1670 #, c-format msgid "no config file for %s" msgstr "%s에 대한 설정 파일 없음" #: src/conf/nwfilter_conf.c:3195 src/conf/storage_conf.c:1676 #, c-format msgid "cannot remove config for %s" msgstr "%s에 대한 설정을 제거할 수 없음" #: src/conf/nwfilter_conf.c:3268 #, c-format msgid "formatter for %s %s reported error" msgstr "" #: src/conf/nwfilter_params.c:117 #, fuzzy msgid "Variable value contains invalid character" msgstr "모델 이름에 잘못된 문자가 들어있습니다" #: src/conf/nwfilter_params.c:328 src/conf/nwfilter_params.c:581 #, fuzzy, c-format msgid "Could not find value for variable '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/conf/nwfilter_params.c:353 msgid "" "Cardinality of list items must be the same for processing them in parallel" msgstr "" #: src/conf/nwfilter_params.c:396 msgid "hash lookup resulted in NULL pointer" msgstr "" #: src/conf/nwfilter_params.c:402 #, c-format msgid "Lookup of value at index %u resulted in a NULL pointer" msgstr "" #: src/conf/nwfilter_params.c:545 #, fuzzy, c-format msgid "Could not get iterator index for iterator ID %u" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/conf/nwfilter_params.c:555 #, fuzzy, c-format msgid "Could not get iterator index for (internal) iterator ID %u" msgstr "컨테이너에 대한 eth 이름을 생성할 수 없음" #: src/conf/nwfilter_params.c:573 #, fuzzy, c-format msgid "Could not find variable '%s' in iterator" msgstr "%s에 인자를 넣을 수 없음" #: src/conf/nwfilter_params.c:589 #, fuzzy, c-format msgid "Could not get nth (%u) value of variable '%s'" msgstr "%s상의 매체를 꺼내기할 수 없음" #: src/conf/nwfilter_params.c:740 #, fuzzy, c-format msgid "Could not put variable '%s' into hashmap" msgstr "%s에 인자를 넣을 수 없음" #: src/conf/nwfilter_params.c:867 #, fuzzy msgid "missing filter parameter table" msgstr "드라이브 '%s'에 파일 매개변수가 빠짐" #: src/conf/nwfilter_params.c:1002 msgid "Malformatted array index" msgstr "" #: src/conf/nwfilter_params.c:1005 #, fuzzy msgid "Malformatted iterator id" msgstr "잘못된 형식의 크기 %s" #: src/conf/nwfilter_params.c:1017 #, fuzzy, c-format msgid "Iterator ID exceeds maximum ID of %u" msgstr "보안 doi가 최대값을 넘어감: %zd" #: src/conf/nwfilter_params.c:1030 #, fuzzy msgid "Malformatted variable" msgstr "잘못된 형식의 크기 %s" #: src/conf/secret_conf.c:61 src/conf/secret_conf.c:113 #: src/conf/secret_conf.c:243 src/conf/secret_conf.c:267 #, c-format msgid "unexpected secret usage type %d" msgstr "예기치 못한 비밀 사용 유형 %d" #: src/conf/secret_conf.c:77 msgid "unknown secret usage type" msgstr "알려져 있지 않은 비밀 사용 유형" #: src/conf/secret_conf.c:83 #, c-format msgid "unknown secret usage type %s" msgstr "알려져 있지 않은 비밀 사용 유형 %s" #: src/conf/secret_conf.c:97 msgid "volume usage specified, but volume path is missing" msgstr "볼륨 사용이 지정되었으나, 볼륨 경로가 빠졌습니다" #: src/conf/secret_conf.c:106 #, fuzzy msgid "Ceph usage specified, but name is missing" msgstr "볼륨 사용이 지정되었으나, 볼륨 경로가 빠졌습니다" #: src/conf/secret_conf.c:130 #, fuzzy, c-format msgid "unexpected root element <%s>, expecting " msgstr "예기치 못한 도메인 유형 %d" #: src/conf/secret_conf.c:156 msgid "invalid value of 'ephemeral'" msgstr "'ephemeral'에 대해 잘못된 값" #: src/conf/secret_conf.c:170 msgid "invalid value of 'private'" msgstr "'private'에 대해 잘못된 값" #: src/conf/secret_conf.c:214 msgid "(definition_of_secret)" msgstr "" #: src/conf/snapshot_conf.c:116 #, fuzzy msgid "missing name from disk snapshot element" msgstr "%s 인자에 대해 빠진 값" #: src/conf/snapshot_conf.c:178 tools/virsh-snapshot.c:651 #: tools/virsh-snapshot.c:1306 #, fuzzy msgid "(domain_snapshot)" msgstr "도메인 상태" #: src/conf/snapshot_conf.c:191 #, fuzzy msgid "domainsnapshot" msgstr "도메인 상태" #: src/conf/snapshot_conf.c:201 msgid "a redefined snapshot must have a name" msgstr "" #: src/conf/snapshot_conf.c:220 msgid "missing creationTime from existing snapshot" msgstr "" #: src/conf/snapshot_conf.c:232 msgid "missing state from existing snapshot" msgstr "" #: src/conf/snapshot_conf.c:238 #, fuzzy, c-format msgid "Invalid state '%s' in domain snapshot XML" msgstr "도메인 저장 파일에 대해 잘못된 상태 경로 '%s'" #: src/conf/snapshot_conf.c:253 src/conf/snapshot_conf.c:344 #, fuzzy msgid "missing domain in snapshot" msgstr "도메인 상태 빠짐" #: src/conf/snapshot_conf.c:286 msgid "unable to handle disk requests in snapshot" msgstr "" #: src/conf/snapshot_conf.c:293 #, fuzzy msgid "Could not find 'active' element" msgstr "일치하는 장치를 찾을 수 없음" #: src/conf/snapshot_conf.c:350 #, fuzzy msgid "too many disk snapshot requests for domain" msgstr "도메인에 대한 메모리 통계를 얻음" #: src/conf/snapshot_conf.c:373 #, fuzzy, c-format msgid "no disk named '%s'" msgstr "%s라는 이름의 도메인 없음" #: src/conf/snapshot_conf.c:380 #, c-format msgid "disk '%s' specified twice" msgstr "" #: src/conf/snapshot_conf.c:396 #, fuzzy, c-format msgid "disk '%s' must use snapshot mode '%s'" msgstr "이미 %s 도메인이 이미 uuid %s로 존재함" #: src/conf/snapshot_conf.c:403 #, c-format msgid "file '%s' for disk '%s' requires use of external snapshot mode" msgstr "" #: src/conf/snapshot_conf.c:457 #, c-format msgid "cannot generate external snapshot name for disk '%s' without source" msgstr "" #: src/conf/snapshot_conf.c:464 #, c-format msgid "" "source for disk '%s' is not a regular file; refusing to generate external " "snapshot name" msgstr "" #: src/conf/snapshot_conf.c:478 #, fuzzy msgid "integer overflow" msgstr "내부 오류" #: src/conf/snapshot_conf.c:612 #, fuzzy, c-format msgid "unexpected domain snapshot %s already exists" msgstr "예기치 못한 도메인 %s가 이미 존재함" #: src/conf/storage_conf.c:251 src/storage/storage_backend.c:1002 #, c-format msgid "missing backend for pool type %d" msgstr "풀(pool) 타입 %d에 대해 백엔드가 빠짐" #: src/conf/storage_conf.c:419 msgid "missing auth host attribute" msgstr "auth host 특성이 빠짐" #: src/conf/storage_conf.c:426 msgid "missing auth passwd attribute" msgstr "auth passwd 특성이 빠짐" #: src/conf/storage_conf.c:440 #, fuzzy msgid "missing auth username attribute" msgstr "auth host 특성이 빠짐" #: src/conf/storage_conf.c:448 #, fuzzy msgid "missing auth secret uuid or usage attribute" msgstr "auth host 특성이 빠짐" #: src/conf/storage_conf.c:454 #, fuzzy msgid "invalid auth secret uuid" msgstr "잘못된 비밀정보" #: src/conf/storage_conf.c:484 msgid "missing mandatory 'name' field for RBD pool name" msgstr "" #: src/conf/storage_conf.c:497 #, c-format msgid "unknown pool format type %s" msgstr "알려져 있지 않은 풀(pool) 형식 타입 %s" #: src/conf/storage_conf.c:516 #, fuzzy msgid "missing storage pool host name" msgstr "저장 풀(pool) 소스 호스트 이름이 빠짐" #: src/conf/storage_conf.c:552 msgid "missing storage pool source device path" msgstr "저장 풀 소스 장치 경로가 빠짐" #: src/conf/storage_conf.c:573 #, c-format msgid "unknown auth type '%s'" msgstr "알려지지 않은 auth 유형 '%s'" #: src/conf/storage_conf.c:612 msgid "(storage_source_specification)" msgstr "" #: src/conf/storage_conf.c:623 msgid "root element was not source" msgstr "루트 요소가 소스가 아닙니다" #: src/conf/storage_conf.c:673 msgid "malformed octal mode" msgstr "잘못된 형식의 8진 모드" #: src/conf/storage_conf.c:685 msgid "malformed owner element" msgstr "잘못된 형식의 owner 요소" #: src/conf/storage_conf.c:696 msgid "malformed group element" msgstr "잘못된 형식의 group 요소" #: src/conf/storage_conf.c:728 src/storage/storage_driver.c:446 #: src/test/test_driver.c:4042 #, c-format msgid "unknown storage pool type %s" msgstr "알려지지 않은 저장 풀(pool) 유형 %s" #: src/conf/storage_conf.c:752 msgid "missing pool source name element" msgstr "풀(pool) 소스 이름 요소 빠짐" #: src/conf/storage_conf.c:776 msgid "missing storage pool source host name" msgstr "저장 풀(pool) 소스 호스트 이름이 빠짐" #: src/conf/storage_conf.c:784 msgid "missing storage pool source path" msgstr "저장 풀(pool) 소스 경로가 빠짐" #: src/conf/storage_conf.c:802 msgid "missing storage pool source adapter name" msgstr "저장 풀(pool) 소스 아답터 이름이 빠짐" #: src/conf/storage_conf.c:811 msgid "missing storage pool source device name" msgstr "저장 풀(pool) 소스 장치 이름이 빠짐" #: src/conf/storage_conf.c:821 msgid "missing storage pool target path" msgstr "저장 풀(pool) 타겟 경로가 빠짐" #: src/conf/storage_conf.c:852 msgid "unknown root element for storage pool" msgstr "저장 풀(pool)에 대한 알려져 있지 않은 루트 요소" #: src/conf/storage_conf.c:875 #, fuzzy msgid "(storage_pool_definition)" msgstr "저장소 풀 정보" #: src/conf/storage_conf.c:952 #, c-format msgid "unknown pool format number %d" msgstr "알려져 있지 않은 풀(pool) 형식 번호 %d" #: src/conf/storage_conf.c:1011 src/conf/storage_conf.c:1714 msgid "unexpected pool type" msgstr "예기치 못한 풀 유형" #: src/conf/storage_conf.c:1075 msgid "malformed capacity element" msgstr "잘못된 형식의 용량 요소" #: src/conf/storage_conf.c:1108 msgid "missing volume name element" msgstr "볼륨 이름 요소가 빠짐" #: src/conf/storage_conf.c:1119 msgid "missing capacity element" msgstr "용량 요소가 빠짐" #: src/conf/storage_conf.c:1148 src/conf/storage_conf.c:1180 #, c-format msgid "unknown volume format type %s" msgstr "알려지지 않은 볼륨 형식 유형 %s" #: src/conf/storage_conf.c:1211 msgid "unknown root element for storage vol" msgstr "storage vol에 대해 알려지지 않은 루트 요소" #: src/conf/storage_conf.c:1235 #, fuzzy msgid "(storage_volume_definition)" msgstr "저장소 볼륨 정보" #: src/conf/storage_conf.c:1284 #, c-format msgid "unknown volume format number %d" msgstr "알려지지 않은 볼륨 형식 번호 %d" #: src/conf/storage_conf.c:1544 #, c-format msgid "Storage pool config filename '%s' does not match pool name '%s'" msgstr "저장 풀(pool) 설정 파일이름 '%s'는 풀 이름 '%s'에 부합되지 않습니다" #: src/conf/storage_conf.c:1765 #, fuzzy, c-format msgid "pool '%s' is already defined with uuid %s" msgstr "도메인 '%s'가 uuid %s로 이미 정의되어 있습니다" #: src/conf/storage_conf.c:1774 #, fuzzy, c-format msgid "pool is already active as '%s'" msgstr "도메인이 이미 '%s'로 활성화되어 있습니다" #: src/conf/storage_conf.c:1788 #, fuzzy, c-format msgid "pool '%s' already exists with uuid %s" msgstr "이미 %s 도메인이 이미 uuid %s로 존재함" #: src/conf/storage_conf.c:1870 #, c-format msgid "Storage source conflict with pool: '%s'" msgstr "" #: src/conf/storage_encryption_conf.c:92 msgid "unknown volume encryption secret type" msgstr "알려지지 않은 볼륨 암호화 비밀 유형" #: src/conf/storage_encryption_conf.c:98 #, c-format msgid "unknown volume encryption secret type %s" msgstr "알려지지 않은 볼륨 암호화 비밀 유형 %s" #: src/conf/storage_encryption_conf.c:110 #, c-format msgid "malformed volume encryption uuid '%s'" msgstr "잘못된 형식의 볼륨 암호화 uuid '%s'" #: src/conf/storage_encryption_conf.c:117 msgid "missing volume encryption uuid" msgstr "볼륨 암호화 uuid 빠짐" #: src/conf/storage_encryption_conf.c:146 msgid "unknown volume encryption format" msgstr "알려져 있지 않은 볼륨 암호화 형식" #: src/conf/storage_encryption_conf.c:152 #, c-format msgid "unknown volume encryption format type %s" msgstr "알려져 있지 않은 볼륨 암호화 형식 %s" #: src/conf/storage_encryption_conf.c:192 msgid "unknown root element for volume encryption information" msgstr "볼륨 암호화 정보에 대한 루트 요소가 알려져 있지 않음" #: src/conf/storage_encryption_conf.c:222 msgid "unexpected volume encryption secret type" msgstr "예기치 못한 볼륨 암호화 비밀 유형" #: src/conf/storage_encryption_conf.c:242 msgid "unexpected encryption format" msgstr "예기치 못한 암호화 형식" #: src/conf/storage_encryption_conf.c:269 msgid "Cannot open /dev/urandom" msgstr "/dev/urandom을 열 수 없음" #: src/conf/storage_encryption_conf.c:280 msgid "Cannot read from /dev/urandom" msgstr "/dev/urandom에서 읽을 수 없음" #: src/conf/virconsole.c:128 #, c-format msgid "" "Requested console pty '%s' is locked by lock file '%s' held by process %lld" msgstr "" #: src/conf/virconsole.c:157 #, fuzzy, c-format msgid "Couldn't create lock file for pty '%s' in path '%s'" msgstr "볼륨 목적 경로 '%s'를 읽을 수 없습니다" #: src/conf/virconsole.c:166 #, fuzzy, c-format msgid "Couldn't write to lock file for pty '%s' in path '%s'" msgstr "볼륨 목적 경로 '%s'를 읽을 수 없습니다" #: src/cpu/cpu.c:58 src/cpu/cpu_map.c:90 msgid "undefined hardware architecture" msgstr "정의되지 않은 하드웨어 아키텍쳐" #: src/cpu/cpu.c:85 src/cpu/cpu.c:314 #, fuzzy msgid "(CPU_definition)" msgstr "잘못된 CPU 정의" #: src/cpu/cpu.c:94 #, fuzzy msgid "no CPU model specified" msgstr "커널이 지정되지 않았습니다" #: src/cpu/cpu.c:122 #, c-format msgid "cannot compare CPUs of %s architecture" msgstr "%s 아키텍쳐의 CPU를 비교할 수 없음" #: src/cpu/cpu.c:150 src/cpu/cpu.c:384 msgid "nonzero nmodels doesn't match with NULL models" msgstr "0이 아닌 nmodels는 NULL 모델 지정과 합치하지 않습니다" #: src/cpu/cpu.c:156 msgid "invalid CPU definition" msgstr "잘못된 CPU 정의" #: src/cpu/cpu.c:165 #, c-format msgid "cannot decode CPU data for %s architecture" msgstr "%s 아키텍쳐에 대한 CPU 데이터를 복호화 할 수 없음" #: src/cpu/cpu.c:196 #, c-format msgid "cannot encode CPU data for %s architecture" msgstr "%s 아키텍쳐에 대한 CPU 데이터를 부호화 할 수 없음" #: src/cpu/cpu.c:222 #, c-format msgid "cannot free CPU data for %s architecture" msgstr "%s 아키텍쳐에 대한 CPU 데이터를 해제할 수 없음" #: src/cpu/cpu.c:243 #, c-format msgid "cannot get node CPU data for %s architecture" msgstr "%s 아키텍쳐에 대한 노드 CPU 데이터를 얻을 수 없음" #: src/cpu/cpu.c:267 #, c-format msgid "cannot compute guest CPU data for %s architecture" msgstr "%s 아키텍쳐에 대한 게스트 CPU 데이터를 계산할 수 없음" #: src/cpu/cpu.c:301 msgid "nonzero ncpus doesn't match with NULL xmlCPUs" msgstr "0이 아닌 ncpus는 NULL xmlCPUs 정의와 합치하지 않습니다" #: src/cpu/cpu.c:306 src/cpu/cpu.c:378 msgid "No CPUs given" msgstr "CPU가 지정되지 않았습니다" #: src/cpu/cpu.c:373 msgid "nonzero ncpus doesn't match with NULL cpus" msgstr "0이 아닌 ncpus는 NULL cpus와 합치하지 않습니다" #: src/cpu/cpu.c:393 #, c-format msgid "cannot compute baseline CPU of %s architecture" msgstr "%s 아키텍쳐의 베이스라인 CPU를 계산할 수 없음" #: src/cpu/cpu.c:415 #, fuzzy, c-format msgid "cannot update guest CPU data for %s architecture" msgstr "%s 아키텍쳐에 대한 게스트 CPU 데이터를 계산할 수 없음" #: src/cpu/cpu.c:438 #, fuzzy, c-format msgid "cannot check guest CPU data for %s architecture" msgstr "%s 아키텍쳐에 대한 게스트 CPU 데이터를 계산할 수 없음" #: src/cpu/cpu_generic.c:135 #, c-format msgid "CPU model '%s' is not support by hypervisor" msgstr "CPU 모델 '%s'를 hypervisor가 지원하지 않습니다" #: src/cpu/cpu_generic.c:158 #, c-format msgid "CPUs have incompatible architectures: '%s' != '%s'" msgstr "CPU가 호환되지 않는 아키텍쳐를 가지고 있습니다: '%s' != '%s'" #: src/cpu/cpu_generic.c:165 #, c-format msgid "CPU models don't match: '%s' != '%s'" msgstr "CPU 모델이 일치하지 않습니다: '%s' != '%s'" #: src/cpu/cpu_map.c:96 #, fuzzy msgid "no callback provided" msgstr "권한 설정 콜백이 제공되지 않았습니다." #: src/cpu/cpu_map.c:102 #, c-format msgid "cannot parse CPU map file: %s" msgstr "CPU 맵 파일을 구문분석할 수 없습니다: %s" #: src/cpu/cpu_map.c:120 #, c-format msgid "cannot find CPU map for %s architecture" msgstr "%s 아키텍쳐에 대한 CPU 맵을 찾을 수 없음" #: src/cpu/cpu_map.c:127 #, c-format msgid "cannot parse CPU map for %s architecture" msgstr "%s 아키텍쳐에 대한 CPU 맵을 구문분석 할 수 없음" #: src/cpu/cpu_x86.c:528 #, fuzzy msgid "Missing CPU vendor name" msgstr "CPU 특징 이름 빠짐" #: src/cpu/cpu_x86.c:534 #, fuzzy, c-format msgid "CPU vendor %s already defined" msgstr "CPU 특징 %s가 이미 정의되었습니다" #: src/cpu/cpu_x86.c:541 #, fuzzy, c-format msgid "Missing vendor string for CPU vendor %s" msgstr "CPU 모델 %s에 대한 특징 이름 빠짐" #: src/cpu/cpu_x86.c:546 #, fuzzy, c-format msgid "Invalid CPU vendor string '%s'" msgstr "'%s'에 대해 잘못된 USB 벤더 ID가 지정되었습니다" #: src/cpu/cpu_x86.c:683 #, c-format msgid "CPU feature %s already defined" msgstr "CPU 특징 %s가 이미 정의되었습니다" #: src/cpu/cpu_x86.c:707 #, c-format msgid "Invalid cpuid[%d] in %s feature" msgstr "잘못된 cpuid[%d]가 %s 특징에 있음" #: src/cpu/cpu_x86.c:820 src/cpu/cpu_x86.c:870 #, c-format msgid "Unknown CPU model %s" msgstr "알려지지 않은 CPU 모델 %s" #: src/cpu/cpu_x86.c:841 src/cpu/cpu_x86.c:882 src/cpu/cpu_x86.c:1746 #, c-format msgid "Unknown CPU feature %s" msgstr "알려지지 않은 CPU 특징 %s" #: src/cpu/cpu_x86.c:968 #, c-format msgid "Missing ancestor's name in CPU model %s" msgstr "CPU 모델 %s에서 선조의 이름이 빠짐" #: src/cpu/cpu_x86.c:975 #, c-format msgid "Ancestor model %s not found for CPU model %s" msgstr "선조 모델 %s를 CPU 모델 %s에 대해 찾을 수 없음" #: src/cpu/cpu_x86.c:993 #, fuzzy, c-format msgid "Invalid vendor element in CPU model %s" msgstr "CPU 모델 %s에서 선조의 이름이 빠짐" #: src/cpu/cpu_x86.c:1000 #, fuzzy, c-format msgid "Unknown vendor %s referenced by CPU model %s" msgstr "알려지지 않은 CPU 모델 %s" #: src/cpu/cpu_x86.c:1016 #, c-format msgid "Missing feature name for CPU model %s" msgstr "CPU 모델 %s에 대한 특징 이름 빠짐" #: src/cpu/cpu_x86.c:1022 #, c-format msgid "Feature %s required by CPU model %s not found" msgstr "특징 %s가 CPU 모델 %s에 의해 요청되었으나, 찾을 수 없음" #: src/cpu/cpu_x86.c:1182 #, fuzzy, c-format msgid "CPU arch %s does not match host arch" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/cpu/cpu_x86.c:1195 #, fuzzy, c-format msgid "host CPU vendor does not match required CPU vendor %s" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/cpu/cpu_x86.c:1213 msgid "Host CPU provides forbidden features" msgstr "" #: src/cpu/cpu_x86.c:1222 msgid "Host CPU does not provide required features" msgstr "" #: src/cpu/cpu_x86.c:1244 msgid "Host CPU does not strictly match guest CPU: Extra features" msgstr "" #: src/cpu/cpu_x86.c:1340 #, fuzzy, c-format msgid "CPU model %s is not supported by hypervisor" msgstr "CPU 모델 '%s'를 hypervisor가 지원하지 않습니다" #: src/cpu/cpu_x86.c:1399 msgid "Cannot find suitable CPU model for given data" msgstr "주어진 데이터에 들어맞는 CPU 모델을 찾을 수 없음" #: src/cpu/cpu_x86.c:1494 #, fuzzy, c-format msgid "CPU vendor %s not found" msgstr "네트워크 '%s'를 찾을 수 없음" #: src/cpu/cpu_x86.c:1650 src/cpu/cpu_x86.c:1680 #, fuzzy, c-format msgid "Unknown CPU vendor %s" msgstr "알려지지 않은 CPU 특징 %s" #: src/cpu/cpu_x86.c:1663 #, c-format msgid "CPU vendor %s of model %s differs from vendor %s" msgstr "" #: src/cpu/cpu_x86.c:1685 msgid "CPU vendors do not match" msgstr "" #: src/cpu/cpu_x86.c:1697 msgid "CPUs are incompatible" msgstr "" #: src/cpu/cpu_x86.c:1796 #, fuzzy, c-format msgid "Unexpected CPU mode: %d" msgstr "예기치 못한 비디오 모델 %d" #: src/datatypes.c:182 src/datatypes.c:254 src/datatypes.c:326 #: src/datatypes.c:400 src/datatypes.c:474 src/datatypes.c:547 #: src/datatypes.c:614 src/datatypes.c:711 #, fuzzy msgid "no connection" msgstr "유효하지 않은 연결" #: src/datatypes.c:770 #, fuzzy msgid "bad domain" msgstr "도메인을 재부팅" #: src/driver.c:78 #, fuzzy, c-format msgid "failed to load module %s %s" msgstr "%s를 %s로 마운트하는 데 실패" #: src/driver.c:88 #, fuzzy, c-format msgid "Missing module registration symbol %s" msgstr "%s의 장치 정보 부재" #: src/driver.c:93 #, fuzzy, c-format msgid "Failed module registration %s" msgstr "%s 도메인 강제 종료 실패 " #: src/esx/esx_driver.c:218 #, c-format msgid "" "File name '%s' doesn't have expected format '/vmfs/volumes//" "'" msgstr "" #: src/esx/esx_driver.c:233 #, c-format msgid "File name '%s' refers to non-existing datastore '%s'" msgstr "" #: src/esx/esx_driver.c:255 src/esx/esx_driver.c:357 #, fuzzy, c-format msgid "Could not handle file name '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_driver.c:412 #, fuzzy, c-format msgid "Could not lookup controller model for '%s'" msgstr "'%s'에 대한 프로파일을 삭제할 수 없" #: src/esx/esx_driver.c:430 #, fuzzy, c-format msgid "Found unexpected controller model '%s' for disk '%s'" msgstr "드라이버 이름 '%s'가 디스크 '%s'에 대해 지원되지 않음" #: src/esx/esx_driver.c:495 #, c-format msgid "" "Bit 29 (Long Mode) of HostSystem property 'hardware.cpuFeature[].edx' with " "value '%s' has unexpected value '%c', expecting '0' or '1'" msgstr "" #: src/esx/esx_driver.c:665 src/esx/esx_driver.c:4438 #: src/esx/esx_driver.c:4531 src/esx/esx_network_driver.c:260 #: src/esx/esx_network_driver.c:641 src/esx/esx_storage_driver.c:673 #: src/esx/esx_util.c:53 src/esx/esx_util.c:258 src/esx/esx_vi.c:378 #: src/esx/esx_vi.c:454 src/esx/esx_vi.c:797 src/esx/esx_vi.c:1269 #: src/esx/esx_vi.c:1475 src/esx/esx_vi.c:1511 src/esx/esx_vi.c:1527 #: src/esx/esx_vi.c:1550 src/esx/esx_vi.c:1590 src/esx/esx_vi.c:1619 #: src/esx/esx_vi.c:1653 src/esx/esx_vi.c:1708 src/esx/esx_vi.c:1734 #: src/esx/esx_vi.c:1780 src/esx/esx_vi.c:1808 src/esx/esx_vi.c:2056 #: src/esx/esx_vi.c:2262 src/esx/esx_vi.c:2288 src/esx/esx_vi.c:2324 #: src/esx/esx_vi.c:2358 src/esx/esx_vi.c:2395 src/esx/esx_vi.c:2500 #: src/esx/esx_vi.c:2677 src/esx/esx_vi.c:2722 src/esx/esx_vi.c:2787 #: src/esx/esx_vi.c:2841 src/esx/esx_vi.c:2976 src/esx/esx_vi.c:3044 #: src/esx/esx_vi.c:3131 src/esx/esx_vi.c:3197 src/esx/esx_vi.c:3246 #: src/esx/esx_vi.c:3354 src/esx/esx_vi.c:3410 src/esx/esx_vi.c:3507 #: src/esx/esx_vi.c:3704 src/esx/esx_vi.c:3812 src/esx/esx_vi.c:3870 #: src/esx/esx_vi.c:3927 src/esx/esx_vi.c:3978 src/esx/esx_vi.c:4022 #: src/esx/esx_vi.c:4071 src/esx/esx_vi.c:4120 src/esx/esx_vi.c:4164 #: src/esx/esx_vi.c:4216 src/esx/esx_vi.c:4278 src/esx/esx_vi.c:4397 #: src/esx/esx_vi.c:4745 src/esx/esx_vi.c:4825 src/esx/esx_vi_methods.c:44 #: src/esx/esx_vi_methods.c:240 src/esx/esx_vi_types.c:102 #: src/esx/esx_vi_types.c:196 src/esx/esx_vi_types.c:243 #: src/esx/esx_vi_types.c:285 src/esx/esx_vi_types.c:339 #: src/esx/esx_vi_types.c:611 src/esx/esx_vi_types.c:630 #: src/esx/esx_vi_types.c:710 src/esx/esx_vi_types.c:939 #: src/esx/esx_vi_types.c:1010 src/esx/esx_vi_types.c:1235 #: src/esx/esx_vi_types.c:1275 src/esx/esx_vi_types.c:1296 #: src/esx/esx_vi_types.c:1320 src/esx/esx_vi_types.c:1504 #: src/esx/esx_vi_types.c:1544 src/esx/esx_vi_types.c:1678 #: src/esx/esx_vi_types.c:1744 src/esx/esx_vi_types.c:1774 #: src/hyperv/hyperv_util.c:45 src/hyperv/hyperv_wmi.c:129 #: src/hyperv/hyperv_wmi.c:627 src/hyperv/hyperv_wmi.c:662 src/vmx/vmx.c:1818 #: src/vmx/vmx.c:1893 src/vmx/vmx.c:2001 src/vmx/vmx.c:2342 src/vmx/vmx.c:2460 #: src/vmx/vmx.c:2689 src/vmx/vmx.c:2886 src/vmx/vmx.c:2990 src/vmx/vmx.c:3382 #: src/vmx/vmx.c:3432 src/vmx/vmx.c:3522 src/vmx/vmx.c:3606 #, fuzzy msgid "Invalid argument" msgstr "잘못된 인수" #: src/esx/esx_driver.c:684 src/esx/esx_driver.c:815 #: src/hyperv/hyperv_driver.c:153 src/phyp/phyp_driver.c:1010 #: src/xenapi/xenapi_driver.c:139 #, fuzzy msgid "Username request failed" msgstr "rename(%s, %s) 실패" #: src/esx/esx_driver.c:692 src/esx/esx_driver.c:823 #: src/hyperv/hyperv_driver.c:161 src/phyp/phyp_driver.c:1091 #: src/xenapi/xenapi_driver.c:148 #, fuzzy msgid "Password request failed" msgstr "args 구문 분석에 실패했습니다" #: src/esx/esx_driver.c:723 #, c-format msgid "%s is neither an ESX 3.5, 4.x nor 5.x host" msgstr "" #: src/esx/esx_driver.c:730 #, c-format msgid "%s isn't a GSX 2.0 host" msgstr "" #: src/esx/esx_driver.c:796 msgid "Path has to specify the datacenter and compute resource" msgstr "" #: src/esx/esx_driver.c:852 #, c-format msgid "%s is neither a vCenter 2.5, 4.x nor 5.x server" msgstr "" #: src/esx/esx_driver.c:962 src/hyperv/hyperv_driver.c:100 #, c-format msgid "" "Transport '%s' in URI scheme is not supported, try again without the " "transport part" msgstr "" #: src/esx/esx_driver.c:976 src/hyperv/hyperv_driver.c:108 #, fuzzy msgid "URI is missing the server part" msgstr "소스 경로가 빠짐" #: src/esx/esx_driver.c:983 src/hyperv/hyperv_driver.c:115 #, fuzzy msgid "Missing or invalid auth pointer" msgstr "내부에 잘못된 저장소 볼륨 포인터" #: src/esx/esx_driver.c:1040 msgid "This host is not managed by a vCenter" msgstr "" #: src/esx/esx_driver.c:1047 #, fuzzy, c-format msgid "vCenter IP address %s too big for destination" msgstr "MAC 주소 %s가 목적지에 대해 너무 긺" #: src/esx/esx_driver.c:1060 #, c-format msgid "" "This host is managed by a vCenter with IP address %s, but a mismachting " "vCenter '%s' (%s) has been specified" msgstr "" #: src/esx/esx_driver.c:1216 src/vbox/vbox_MSCOMGlue.c:437 #, fuzzy, c-format msgid "Could not parse version number from '%s'" msgstr "버전 번호 %s를 '%s'에서 구문 분석할 수 없음" #: src/esx/esx_driver.c:1276 msgid "Missing or empty 'hostName' property" msgstr "" #: src/esx/esx_driver.c:1420 #, fuzzy, c-format msgid "CPU Model %s too long for destination" msgstr "모델 %s가 목적지로는 너무 큼" #: src/esx/esx_driver.c:1509 #, fuzzy, c-format msgid "Failed to parse positive integer from '%s'" msgstr "호스트 번호를 '%s'에서 가져오는 데 실패" #: src/esx/esx_driver.c:1610 src/hyperv/hyperv_driver.c:474 #, fuzzy, c-format msgid "No domain with ID %d" msgstr "id %d인 도메인 없음" #: src/esx/esx_driver.c:1698 #, fuzzy, c-format msgid "No domain with name '%s'" msgstr "%s라는 이름의 도메인 없음" #: src/esx/esx_driver.c:1756 src/esx/esx_driver.c:1871 #: src/esx/esx_driver.c:1922 src/esx/esx_driver.c:1978 #, fuzzy msgid "Domain is not powered on" msgstr "도메인이 일시 중지되지 않았습니다" #: src/esx/esx_driver.c:1769 #, fuzzy, c-format msgid "Could not suspend domain: %s" msgstr "도메인 %s를 중지하기 실패" #: src/esx/esx_driver.c:1813 #, fuzzy msgid "Domain is not suspended" msgstr "도메인 %s가 중지됨\n" #: src/esx/esx_driver.c:1827 #, fuzzy, c-format msgid "Could not resume domain: %s" msgstr "도메인을 재개하는 것에 실패" #: src/esx/esx_driver.c:1991 #, fuzzy, c-format msgid "Could not destroy domain: %s" msgstr "%s 도메인 강제 종료 실패 " #: src/esx/esx_driver.c:2062 #, c-format msgid "Got invalid memory size %d" msgstr "" #: src/esx/esx_driver.c:2111 src/esx/esx_driver.c:3022 #, fuzzy msgid "Domain is not powered off" msgstr "도메인이 일시 중지되지 않았습니다" #: src/esx/esx_driver.c:2135 #, fuzzy, c-format msgid "Could not set max-memory to %lu kilobytes: %s" msgstr "메모리 크기를 설정할 수 없음" #: src/esx/esx_driver.c:2192 #, fuzzy, c-format msgid "Could not set memory to %lu kilobytes: %s" msgstr "메모리 크기를 설정할 수 없음" #: src/esx/esx_driver.c:2428 src/esx/esx_driver.c:2438 #, c-format msgid "QueryPerf returned object with unexpected type '%s'" msgstr "" #: src/esx/esx_driver.c:2555 src/esx/esx_driver.c:2639 #: src/phyp/phyp_driver.c:1444 src/phyp/phyp_driver.c:3718 #: src/vbox/vbox_tmpl.c:2122 src/vbox/vbox_tmpl.c:2180 #: src/xenapi/xenapi_driver.c:1121 src/xenapi/xenapi_driver.c:1291 #, fuzzy, c-format msgid "unsupported flags: (0x%x)" msgstr "지원되지 않는 플래그(0x%x)가 '%s'에 전달되었습니다" #: src/esx/esx_driver.c:2561 #, fuzzy msgid "Requested number of virtual CPUs must at least be 1" msgstr "게스트 도메인의 가상 CPU의 갯수를 변경합니다." #: src/esx/esx_driver.c:2577 #, fuzzy, c-format msgid "" "Requested number of virtual CPUs is greater than max allowable number of " "virtual CPUs for the domain: %d > %d" msgstr "요청된 vcpu가 도메인에서 허용할 수 있는 최대 갯수보다 큽니다: %d > %d" #: src/esx/esx_driver.c:2604 #, fuzzy, c-format msgid "Could not set number of virtual CPUs to %d: %s" msgstr "가상 CPU의 갯수를 설정할 수 없음" #: src/esx/esx_driver.c:2826 src/esx/esx_driver.c:2869 #: src/vmware/vmware_driver.c:931 #, fuzzy, c-format msgid "Unsupported config format '%s'" msgstr "지원하지 않는 설정 유형 %s" #: src/esx/esx_driver.c:3036 #, fuzzy, c-format msgid "Could not start domain: %s" msgstr "도메인 %s 시작하기 실패" #: src/esx/esx_driver.c:3120 msgid "Domain already exists, editing existing domains is not supported yet" msgstr "" #: src/esx/esx_driver.c:3156 src/vmware/vmware_conf.c:363 msgid "" "Domain XML doesn't contain any disks, cannot deduce datastore and path for " "VMX file" msgstr "" #: src/esx/esx_driver.c:3171 src/vmware/vmware_conf.c:378 msgid "" "Domain XML doesn't contain any file-based harddisks, cannot deduce datastore " "and path for VMX file" msgstr "" #: src/esx/esx_driver.c:3178 src/vmware/vmware_conf.c:385 msgid "" "First file-based harddisk has no source, cannot deduce datastore and path " "for VMX file" msgstr "" #: src/esx/esx_driver.c:3190 src/vmware/vmware_conf.c:396 #, c-format msgid "Expecting source '%s' of first file-based harddisk to be a VMDK image" msgstr "" #: src/esx/esx_driver.c:3260 #, fuzzy, c-format msgid "Could not define domain: %s" msgstr "도메인 %s를 정의하지 않기 실패" #: src/esx/esx_driver.c:3335 #, fuzzy msgid "Domain is not suspended or powered off" msgstr "도메인 %s가 중지됨\n" #: src/esx/esx_driver.c:3481 msgid "Cannot enable general autostart option without affecting other domains" msgstr "" #: src/esx/esx_driver.c:3688 #, c-format msgid "Shares level has unknown value %d" msgstr "" #: src/esx/esx_driver.c:3766 #, c-format msgid "Could not set reservation to %lld MHz, expecting positive value" msgstr "" #: src/esx/esx_driver.c:3779 #, c-format msgid "" "Could not set limit to %lld MHz, expecting positive value or -1 (unlimited)" msgstr "" #: src/esx/esx_driver.c:3818 #, c-format msgid "" "Could not set shares to %d, expecting positive value or -1 (low), -2 " "(normal) or -3 (high)" msgstr "" #: src/esx/esx_driver.c:3838 #, fuzzy, c-format msgid "Could not change scheduler parameters: %s" msgstr "스케줄러 매개 변수 보기/설정" #: src/esx/esx_driver.c:3924 msgid "Migration not possible without a vCenter" msgstr "" #: src/esx/esx_driver.c:3930 #, fuzzy msgid "Renaming domains on migration not supported" msgstr "이전시 새 이름으로 변경(지원되는 경우에만)" #: src/esx/esx_driver.c:3944 #, fuzzy msgid "Only vpxmigr:// migration URIs are supported" msgstr "xenDaemonDomainMigrate: xenmigr:// 이전 만 Xen이 지원하고 있습니다" #: src/esx/esx_driver.c:3950 msgid "Migration source and destination have to refer to the same vCenter" msgstr "" #: src/esx/esx_driver.c:3960 msgid "Migration URI has to specify resource pool and host system" msgstr "" #: src/esx/esx_driver.c:3995 #, c-format msgid "Could not migrate domain, validation reported a problem: %s" msgstr "" #: src/esx/esx_driver.c:3999 msgid "Could not migrate domain, validation reported a problem" msgstr "" #: src/esx/esx_driver.c:4021 #, c-format msgid "Could not migrate domain, migration task finished with an error: %s" msgstr "" #: src/esx/esx_driver.c:4096 #, fuzzy msgid "Could not retrieve memory usage of resource pool" msgstr "도메인에 대한 메모리 사용량을 읽을 수 없음" #: src/esx/esx_driver.c:4277 src/vbox/vbox_tmpl.c:5932 #, fuzzy msgid "disk snapshots not supported yet" msgstr "cpu 친밀도(affinity)가 지원되지 않습니다" #: src/esx/esx_driver.c:4294 #, fuzzy, c-format msgid "Snapshot '%s' already exists" msgstr "타겟 %s가 이미 존재합니다" #: src/esx/esx_driver.c:4310 #, fuzzy, c-format msgid "Could not create snapshot: %s" msgstr "%s를 실행할 수 없음" #: src/esx/esx_driver.c:4654 src/qemu/qemu_driver.c:11622 #: src/vbox/vbox_tmpl.c:6377 #, fuzzy, c-format msgid "snapshot '%s' does not have a parent" msgstr "비밀정보 '%s'는 값을 가지고 있지 않습니다" #: src/esx/esx_driver.c:4802 #, fuzzy, c-format msgid "Could not revert to snapshot '%s': %s" msgstr "'%s'에 대한 프로파일을 삭제할 수 없" #: src/esx/esx_driver.c:4868 #, fuzzy, c-format msgid "Could not delete snapshot '%s': %s" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_driver.c:4939 #, fuzzy, c-format msgid "Could not change memory parameters: %s" msgstr "스케줄러 매개 변수 보기/설정" #: src/esx/esx_network_driver.c:203 #, fuzzy, c-format msgid "Could not find HostVirtualSwitch with UUID '%s'" msgstr "'%s'에 대한 부모 HBA를 찾을 수 없습니다" #: src/esx/esx_network_driver.c:269 msgid "Different inbound and outbound bandwidth is unsupported" msgstr "" #: src/esx/esx_network_driver.c:362 msgid "" "HostVirtualSwitch already exists, editing existing ones is not supported yet" msgstr "" #: src/esx/esx_network_driver.c:370 msgid "Cannot use predefined UUID" msgstr "" #: src/esx/esx_network_driver.c:378 #, fuzzy, c-format msgid "Unsupported forward mode '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/esx/esx_network_driver.c:394 #, fuzzy, c-format msgid "HostPortGroup with name '%s' exists already" msgstr "이미 %s 도메인이 존재함" #: src/esx/esx_network_driver.c:428 #, fuzzy, c-format msgid "unsupported device type in network %s interface pool" msgstr "지원되지 않는 dom 인터페이스 < 4" #: src/esx/esx_network_driver.c:450 #, fuzzy, c-format msgid "Could not find PhysicalNic with name '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_network_driver.c:570 #, c-format msgid "Cannot undefine HostVirtualSwitch that has a '%s' port" msgstr "" #: src/esx/esx_network_driver.c:583 src/esx/esx_network_driver.c:611 #, fuzzy, c-format msgid "Could not find HostPortGroup for key '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_network_driver.c:773 #, fuzzy, c-format msgid "Could not find PhysicalNic with key '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_network_driver.c:855 #, fuzzy, c-format msgid "Could not find HostPortGroup with key '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_network_driver.c:907 #, fuzzy msgid "Cannot deactivate network autostart" msgstr "사용가능한 저장소 풀 소스를 찾습니다" #: src/esx/esx_storage_driver.c:88 src/esx/esx_storage_driver.c:573 #, fuzzy msgid "DatastoreInfo has unexpected type" msgstr "스트림이 예기치 못하게 종료했습니다" #: src/esx/esx_storage_driver.c:340 #, fuzzy, c-format msgid "Could not find datastore with UUID '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_storage_driver.c:561 #, fuzzy, c-format msgid "Datastore has unexpected type '%s'" msgstr "인터페이스의 유형이 지원되지 않는 '%s'입니다" #: src/esx/esx_storage_driver.c:611 #, fuzzy msgid "Cannot deactivate storage pool autostart" msgstr "사용가능한 저장소 풀 소스를 찾습니다" #: src/esx/esx_storage_driver.c:841 msgid "" "QueryVirtualDiskUuid not available, cannot lookup storage volume by UUID" msgstr "" #: src/esx/esx_storage_driver.c:1003 src/esx/esx_storage_driver.c:1237 #, fuzzy msgid "Creating non-file volumes is not supported" msgstr "" "qemu-img가 없이 로우(raw) 파일이 아닌 이미지의 생성은 지원되지 않습니다." #: src/esx/esx_storage_driver.c:1012 src/esx/esx_storage_driver.c:1246 #, c-format msgid "Volume name '%s' doesn't have expected format '/'" msgstr "" #: src/esx/esx_storage_driver.c:1019 src/esx/esx_storage_driver.c:1253 #, c-format msgid "Volume name '%s' has unsupported suffix, expecting '.vmdk'" msgstr "" #: src/esx/esx_storage_driver.c:1099 msgid "Unsupported capacity-to-allocation relation" msgstr "" #: src/esx/esx_storage_driver.c:1125 #, fuzzy, c-format msgid "Could not create volume: %s" msgstr "veth 이름을 생성할 수 없음" #: src/esx/esx_storage_driver.c:1153 src/esx/esx_storage_driver.c:1355 #, fuzzy, c-format msgid "Creation of %s volumes is not supported" msgstr "디스크 암호 설정을 지원하지 않습니다" #: src/esx/esx_storage_driver.c:1327 #, fuzzy, c-format msgid "Could not copy volume: %s" msgstr "veth 이름을 생성할 수 없음" #: src/esx/esx_storage_driver.c:1415 #, fuzzy, c-format msgid "Could not delete volume: %s" msgstr "veth 이름을 생성할 수 없음" #: src/esx/esx_storage_driver.c:1464 #, fuzzy, c-format msgid "Could not wipe volume: %s" msgstr "veth 이름을 생성할 수 없음" #: src/esx/esx_storage_driver.c:1599 #, fuzzy, c-format msgid "File '%s' has unknown type" msgstr "알려지지 않은 유형" #: src/esx/esx_util.c:78 src/hyperv/hyperv_util.c:70 #, c-format msgid "" "Query parameter 'transport' has unexpected value '%s' (should be http|https)" msgstr "" #: src/esx/esx_util.c:96 #, c-format msgid "" "Query parameter 'no_verify' has unexpected value '%s' (should be 0 or 1)" msgstr "" #: src/esx/esx_util.c:106 #, c-format msgid "" "Query parameter 'auto_answer' has unexpected value '%s' (should be 0 or 1)" msgstr "" #: src/esx/esx_util.c:132 #, c-format msgid "" "Query parameter 'proxy' contains unexpected type '%s' (should be (http|socks" "(|4|4a|5))" msgstr "" #: src/esx/esx_util.c:150 msgid "Query parameter 'proxy' doesn't contain a hostname" msgstr "" #: src/esx/esx_util.c:162 #, c-format msgid "" "Query parameter 'proxy' has unexpected portvalue '%s' (should be [1..65535])" msgstr "" #: src/esx/esx_util.c:270 #, c-format msgid "Datastore path '%s' doesn't have expected format '[] '" msgstr "" #: src/esx/esx_util.c:353 #, fuzzy, c-format msgid "IP address lookup for host '%s' failed: %s" msgstr "타겟 %s에 대해 IP 주소가 없음" #: src/esx/esx_util.c:360 #, fuzzy, c-format msgid "No IP address for host '%s' found: %s" msgstr "타겟 %s에 대해 IP 주소가 없음" #: src/esx/esx_util.c:370 #, fuzzy, c-format msgid "Formatting IP address for host '%s' failed: %s" msgstr "타겟 %s에 대해 IP 주소가 없음" #: src/esx/esx_util.c:390 src/esx/esx_vi.c:2566 src/hyperv/hyperv_driver.c:909 #: src/hyperv/hyperv_wmi.c:633 src/vmx/vmx.c:718 #, fuzzy, c-format msgid "Could not parse UUID from string '%s'" msgstr "usb 파일 %s를 구문분석 할 수 없음" #: src/esx/esx_vi.c:247 #, c-format msgid "curl_easy_perform() returned an error: %s (%d) : %s" msgstr "" #: src/esx/esx_vi.c:257 #, c-format msgid "" "curl_easy_getinfo(CURLINFO_RESPONSE_CODE) returned an error: %s (%d) : %s" msgstr "" #: src/esx/esx_vi.c:265 msgid "" "curl_easy_getinfo(CURLINFO_RESPONSE_CODE) returned a negative response code" msgstr "" #: src/esx/esx_vi.c:277 #, c-format msgid "" "curl_easy_getinfo(CURLINFO_REDIRECT_URL) returned an error: %s (%d) : %s" msgstr "" #: src/esx/esx_vi.c:283 #, c-format msgid "The server redirects from '%s' to '%s'" msgstr "" #: src/esx/esx_vi.c:288 #, fuzzy, c-format msgid "The server redirects from '%s'" msgstr "자식이 '%s'에서 읽는 것을 실패했습니다" #: src/esx/esx_vi.c:301 src/esx/esx_vi_methods.c:165 #, fuzzy msgid "Invalid call" msgstr "잘못된 비밀정보" #: src/esx/esx_vi.c:309 #, fuzzy msgid "Could not initialize CURL" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_vi.c:328 msgid "Could not build CURL header list" msgstr "" #: src/esx/esx_vi.c:362 #, fuzzy msgid "Could not initialize CURL mutex" msgstr "뮤텍스를 초기화할 수 없습니다." #: src/esx/esx_vi.c:390 #, fuzzy msgid "Download length it too large" msgstr "도메인 상태를 파일에 저장" #: src/esx/esx_vi.c:421 #, c-format msgid "HTTP response code %d for download from '%s'" msgstr "" #: src/esx/esx_vi.c:474 #, c-format msgid "HTTP response code %d for upload to '%s'" msgstr "" #: src/esx/esx_vi.c:509 #, c-format msgid "Trying to lock unknown SharedCURL lock %d" msgstr "" #: src/esx/esx_vi.c:537 #, c-format msgid "Trying to unlock unknown SharedCURL lock %d" msgstr "" #: src/esx/esx_vi.c:554 msgid "Trying to free SharedCURL object that is still in use" msgstr "" #: src/esx/esx_vi.c:574 #, fuzzy msgid "Cannot share uninitialized CURL handle" msgstr "뮤텍스를 초기화할 수 없습니다." #: src/esx/esx_vi.c:580 msgid "Cannot share CURL handle that is already shared" msgstr "" #: src/esx/esx_vi.c:589 #, fuzzy msgid "Could not initialize CURL (share)" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_vi.c:606 #, fuzzy msgid "Could not initialize a CURL (share) mutex" msgstr "뮤텍스를 초기화할 수 없습니다." #: src/esx/esx_vi.c:629 #, fuzzy msgid "Cannot unshare uninitialized CURL handle" msgstr "마운트 이름공간을 공유 해제 할 수 없음" #: src/esx/esx_vi.c:635 msgid "Cannot unshare CURL handle that is not shared" msgstr "" #: src/esx/esx_vi.c:640 msgid "CURL (share) mismatch" msgstr "" #: src/esx/esx_vi.c:670 msgid "Trying to free MultiCURL object that is still in use" msgstr "" #: src/esx/esx_vi.c:684 #, fuzzy msgid "Cannot add uninitialized CURL handle to a multi handle" msgstr "뮤텍스를 초기화할 수 없습니다." #: src/esx/esx_vi.c:690 msgid "Cannot add CURL handle to a multi handle twice" msgstr "" #: src/esx/esx_vi.c:699 #, fuzzy msgid "Could not initialize CURL (multi)" msgstr "뮤텍스를 초기화할 수 없습니다." #: src/esx/esx_vi.c:721 #, fuzzy msgid "Cannot remove uninitialized CURL handle from a multi handle" msgstr "뮤텍스를 초기화할 수 없습니다." #: src/esx/esx_vi.c:728 msgid "" "Cannot remove CURL handle from a multi handle when it wasn't added before" msgstr "" #: src/esx/esx_vi.c:734 msgid "CURL (multi) mismatch" msgstr "" #: src/esx/esx_vi.c:817 #, fuzzy msgid "Could not initialize session mutex" msgstr "뮤텍스를 초기화할 수 없습니다." #: src/esx/esx_vi.c:847 #, c-format msgid "" "Expecting VI API major/minor version '2.5', '4.x' or '5.x' but found '%s'" msgstr "" #: src/esx/esx_vi.c:857 #, c-format msgid "Expecting GSX major/minor version '2.0' but found '%s'" msgstr "" #: src/esx/esx_vi.c:883 #, c-format msgid "Expecting ESX major/minor version '3.5', '4.x' or '5.x' but found '%s'" msgstr "" #: src/esx/esx_vi.c:909 #, c-format msgid "Expecting VPX major/minor version '2.5', '4.x' or '5.x' but found '%s'" msgstr "" #: src/esx/esx_vi.c:916 #, c-format msgid "" "Expecting product 'gsx' or 'esx' or 'embeddedEsx' or 'vpx' but found '%s'" msgstr "" #: src/esx/esx_vi.c:923 #, c-format msgid "Expecting VI API type 'HostAgent' or 'VirtualCenter' but found '%s'" msgstr "" #: src/esx/esx_vi.c:977 src/esx/esx_vi.c:1143 src/esx/esx_vi.c:1237 msgid "Could not retrieve resource pool" msgstr "" #: src/esx/esx_vi.c:1029 #, fuzzy, c-format msgid "Path '%s' does not specify a datacenter" msgstr "비밀정보 '%s'는 값을 가지고 있지 않습니다" #: src/esx/esx_vi.c:1073 #, fuzzy, c-format msgid "Could not find datacenter specified in '%s'" msgstr "'%s'에 대한 부모 HBA를 찾을 수 없습니다" #: src/esx/esx_vi.c:1087 #, c-format msgid "Path '%s' does not specify a compute resource" msgstr "" #: src/esx/esx_vi.c:1136 #, fuzzy, c-format msgid "Could not find compute resource specified in '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_vi.c:1159 #, fuzzy, c-format msgid "Path '%s' does not specify a host system" msgstr "템플릿 '%s'는 존재하지 않습니다" #: src/esx/esx_vi.c:1170 #, c-format msgid "Path '%s' ends with an excess item" msgstr "" #: src/esx/esx_vi.c:1190 #, fuzzy, c-format msgid "Could not find host system specified in '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_vi.c:1303 msgid "(esx execute response)" msgstr "" #: src/esx/esx_vi.c:1321 #, c-format msgid "" "HTTP response code %d for call to '%s'. Fault is unknown, XPath evaluation " "failed" msgstr "" #: src/esx/esx_vi.c:1329 #, c-format msgid "" "HTTP response code %d for call to '%s'. Fault is unknown, deserialization " "failed" msgstr "" #: src/esx/esx_vi.c:1336 #, c-format msgid "HTTP response code %d for call to '%s'. Fault: %s - %s" msgstr "" #: src/esx/esx_vi.c:1358 #, c-format msgid "XPath evaluation of response for call to '%s' failed" msgstr "" #: src/esx/esx_vi.c:1370 src/esx/esx_vi.c:1385 #, c-format msgid "Call to '%s' returned an empty result, expecting a non-empty result" msgstr "" #: src/esx/esx_vi.c:1375 src/esx/esx_vi.c:1396 #, c-format msgid "Call to '%s' returned a list, expecting exactly one item" msgstr "" #: src/esx/esx_vi.c:1410 #, c-format msgid "Call to '%s' returned something, expecting an empty result" msgstr "" #: src/esx/esx_vi.c:1419 #, fuzzy msgid "Invalid argument (occurrence)" msgstr "잘못된 인수" #: src/esx/esx_vi.c:1425 #, c-format msgid "HTTP response code %d for call to '%s'" msgstr "" #: src/esx/esx_vi.c:1483 src/esx/esx_vi_types.c:926 #, c-format msgid "Expecting type '%s' but found '%s'" msgstr "" #: src/esx/esx_vi.c:1497 src/esx/esx_vi.c:1569 src/esx/esx_vi_types.c:358 #: src/esx/esx_vi_types.c:1062 #, fuzzy, c-format msgid "Unknown value '%s' for %s" msgstr "기능 유형 '%d'가('%s'에 대해) 알려져 있지 않음" #: src/esx/esx_vi.c:1663 #, c-format msgid "Expecting type to begin with 'ArrayOf' but found '%s'" msgstr "" #: src/esx/esx_vi.c:1672 src/esx/esx_vi.c:1745 src/esx/esx_vi_types.c:299 #, c-format msgid "Wrong XML element type %d" msgstr "" #: src/esx/esx_vi.c:1954 #, fuzzy msgid "Invalid call, no mutex" msgstr "잘못된 비밀정보" #: src/esx/esx_vi.c:1961 #, fuzzy msgid "Invalid call, no session" msgstr "잘못된 비밀정보" #: src/esx/esx_vi.c:2020 msgid "Key of the current session differs from the key at last login" msgstr "" #: src/esx/esx_vi.c:2075 src/esx/esx_vi.c:2087 src/esx/esx_vi.c:2101 #: src/esx/esx_vi.c:2110 #, fuzzy, c-format msgid "Invalid lookup of '%s' from '%s'" msgstr "잘못된 디스크 버스 유형 '%s'" #: src/esx/esx_vi.c:2116 #, fuzzy, c-format msgid "Invalid lookup from '%s'" msgstr "그룹 '%s' 검색에 실패했습니다" #: src/esx/esx_vi.c:2157 #, fuzzy, c-format msgid "Could not lookup '%s' from '%s'" msgstr "잘못된 디스크 버스 유형 '%s'" #: src/esx/esx_vi.c:2163 #, fuzzy, c-format msgid "Could not lookup '%s' list from '%s'" msgstr "잘못된 디스크 버스 유형 '%s'" #: src/esx/esx_vi.c:2169 #, fuzzy msgid "Invalid occurrence value" msgstr "%s에 있는 잘못된 인수" #: src/esx/esx_vi.c:2224 #, c-format msgid "Missing '%s' property while looking for ManagedEntityStatus" msgstr "" #: src/esx/esx_vi.c:2247 msgid "Missing 'runtime.powerState' property" msgstr "" #: src/esx/esx_vi.c:2308 src/esx/esx_vi.c:2341 src/esx/esx_vi.c:2377 #: src/esx/esx_vi.c:2413 #, fuzzy, c-format msgid "Missing '%s' property" msgstr "제품 빠짐" #: src/esx/esx_vi.c:2484 msgid "ObjectContent does not reference a virtual machine" msgstr "" #: src/esx/esx_vi.c:2492 #, fuzzy, c-format msgid "Could not parse positive integer from '%s'" msgstr "usb 파일 %s를 구문분석 할 수 없음" #: src/esx/esx_vi.c:2522 #, fuzzy msgid "Domain name contains invalid escape sequence" msgstr "모델 이름에 잘못된 문자가 들어있습니다" #: src/esx/esx_vi.c:2532 #, fuzzy msgid "Could not get name of virtual machine" msgstr "가상 CPU의 갯수를 설정할 수 없음" #: src/esx/esx_vi.c:2560 #, fuzzy msgid "Could not get UUID of virtual machine" msgstr "가상 CPU의 갯수를 설정할 수 없음" #: src/esx/esx_vi.c:2705 #, fuzzy, c-format msgid "Could not find snapshot with name '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_vi.c:2740 #, fuzzy, c-format msgid "Could not find domain snapshot with internal name '%s'" msgstr "이름이 '%s'와 일치하는 도메인이 없음" #: src/esx/esx_vi.c:2805 #, fuzzy, c-format msgid "Could not find domain with UUID '%s'" msgstr "'%s'에 대한 부모 HBA를 찾을 수 없습니다" #: src/esx/esx_vi.c:2880 #, fuzzy, c-format msgid "Could not find domain with name '%s'" msgstr "이름이 '%s'와 일치하는 도메인이 없음" #: src/esx/esx_vi.c:2933 msgid "Other tasks are pending for this domain" msgstr "" #: src/esx/esx_vi.c:3014 #, fuzzy, c-format msgid "Could not find datastore with name '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_vi.c:3101 #, fuzzy, c-format msgid "Could not find datastore containing absolute path '%s'" msgstr "입력 경로 '%s'를 열 수 없음" #: src/esx/esx_vi.c:3171 #, fuzzy msgid "Could not lookup datastore host mount" msgstr "호스트 스캔을 시작하게 하려고 '%s'를 열 수 없습니다" #: src/esx/esx_vi.c:3447 msgid "Domain has no current snapshot" msgstr "" #: src/esx/esx_vi.c:3454 msgid "Could not lookup root snapshot list" msgstr "" #: src/esx/esx_vi.c:3542 #, c-format msgid "Datastore path '%s' doesn't reference a file" msgstr "" #: src/esx/esx_vi.c:3629 #, fuzzy, c-format msgid "Could not search in datastore '%s': %s" msgstr "메모리 영역을 '%s'에 저장할 수 없음" #: src/esx/esx_vi.c:3648 #, fuzzy, c-format msgid "No storage volume with key or path '%s'" msgstr "경로 '%s'와 일치하는 저장소 볼륨이 없습니다" #: src/esx/esx_vi.c:3774 #, fuzzy, c-format msgid "Could not serach in datastore '%s': %s" msgstr "메모리 영역을 '%s'에 저장할 수 없음" #: src/esx/esx_vi.c:3902 #, fuzzy msgid "Could not retrieve the AutoStartDefaults object" msgstr "현재 시간을 얻을 수 없음" #: src/esx/esx_vi.c:4047 #, fuzzy, c-format msgid "Could not find physical NIC with name '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_vi.c:4096 #, fuzzy, c-format msgid "Could not find physical NIC with MAC address '%s'" msgstr "MAC 주소가 %s인 인터페이스를 찾을 수 없음" #: src/esx/esx_vi.c:4191 #, fuzzy, c-format msgid "Could not find HostVirtualSwitch with name '%s'" msgstr "이름이 '%s'와 일치하는 도메인이 없음" #: src/esx/esx_vi.c:4314 src/esx/esx_vi.c:4348 #, c-format msgid "" "Pending question blocks virtual machine execution, question is '%s', no " "possible answers" msgstr "" #: src/esx/esx_vi.c:4322 #, c-format msgid "" "Pending question blocks virtual machine execution, question is '%s', " "possible answers are %s, but no default answer is specified" msgstr "" #: src/esx/esx_vi.c:4343 #, c-format msgid "" "Pending question blocks virtual machine execution, question is '%s', " "possible answers are %s" msgstr "" #: src/esx/esx_vi.c:4462 msgid "" "Cancelable task is blocked by an unanswered question but cancellation failed" msgstr "" #: src/esx/esx_vi.c:4467 msgid "Non-cancelable task is blocked by an unanswered question" msgstr "" #: src/esx/esx_vi.c:4612 #, c-format msgid "HostCpuIdInfo register '%s' has an unexpected length" msgstr "" #: src/esx/esx_vi.c:4626 #, c-format msgid "HostCpuIdInfo register '%s' has an unexpected format" msgstr "" #: src/esx/esx_vi.c:4677 #, fuzzy msgid "Unexpected product version" msgstr "예기치 못한 풀 유형" #: src/esx/esx_vi.c:4831 #, fuzzy, c-format msgid "Missing 'name' property in %s lookup" msgstr "제품 빠짐" #: src/esx/esx_vi.c:4864 #, fuzzy, c-format msgid "Could not find %s with name '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/esx/esx_vi_types.c:85 src/esx/esx_vi_types.c:771 #, c-format msgid "%s object has invalid dynamic type" msgstr "" #: src/esx/esx_vi_types.c:215 src/esx/esx_vi_types.c:228 #: src/esx/esx_vi_types.c:547 src/esx/esx_vi_types.c:693 #, fuzzy, c-format msgid "Call to %s for unexpected type '%s'" msgstr "예기치 못한 디스크 유형 %s" #: src/esx/esx_vi_types.c:351 #, c-format msgid "XML node doesn't contain text, expecting an %s value" msgstr "" #: src/esx/esx_vi_types.c:365 #, c-format msgid "Value '%s' is not representable as %s" msgstr "" #: src/esx/esx_vi_types.c:490 src/esx/esx_vi_types.c:754 #, fuzzy, c-format msgid "%s object is missing the required '%s' property" msgstr "제품 빠짐" #: src/esx/esx_vi_types.c:720 src/esx/esx_vi_types.c:1865 #, c-format msgid "%s is missing 'type' property" msgstr "" #: src/esx/esx_vi_types.c:729 #, fuzzy, c-format msgid "Unknown value '%s' for %s 'type' property" msgstr "알려지지 않은 볼륨 형식 유형 %s" #: src/esx/esx_vi_types.c:956 src/esx/esx_vi_types.c:1022 #, fuzzy msgid "Could not copy an XML node" msgstr "기본 설정을 복사할 수 없음" #: src/esx/esx_vi_types.c:1033 msgid "AnyType is missing 'type' property" msgstr "" #: src/esx/esx_vi_types.c:1041 #, c-format msgid "Unknown value '%s' for AnyType 'type' property" msgstr "" #: src/esx/esx_vi_types.c:1070 #, c-format msgid "Value '%s' is out of %s range" msgstr "" #: src/esx/esx_vi_types.c:1086 #, c-format msgid "Unknown value '%s' for xsd:boolean" msgstr "" #: src/esx/esx_vi_types.c:1517 msgid "XML node doesn't contain text, expecting an xsd:dateTime value" msgstr "" #: src/esx/esx_vi_types.c:1550 #, fuzzy, c-format msgid "xsd:dateTime value '%s' too long for destination" msgstr "너무 긴 목적지 브리지 이름 %s" #: src/esx/esx_vi_types.c:1572 src/esx/esx_vi_types.c:1582 #: src/esx/esx_vi_types.c:1595 src/esx/esx_vi_types.c:1609 #, c-format msgid "xsd:dateTime value '%s' has unexpected format" msgstr "" #: src/esx/esx_vi_types.c:1692 #, fuzzy msgid "MethodFault is missing 'type' property" msgstr "제품 빠짐" #: src/esx/esx_vi_types.c:1787 msgid "ManagedObjectReference is missing 'type' property" msgstr "" #: src/fdstream.c:83 src/fdstream.c:120 src/fdstream.c:202 src/fdstream.c:364 #: src/fdstream.c:416 msgid "stream is not open" msgstr "스트림이 열려있지 않습니다" #: src/fdstream.c:90 src/fdstream.c:127 msgid "stream does not have a callback registered" msgstr "스트림에 등록된 콜백이 없습니다" #: src/fdstream.c:209 msgid "stream already has a callback registered" msgstr "스트림에 이미 등록된 콜백이 있습니다" #: src/fdstream.c:219 msgid "cannot register file watch on stream" msgstr "스트렘에 대해 파일 감시를 등록할 수 없음" #: src/fdstream.c:298 #, c-format msgid "I/O helper exited with status %d" msgstr "" #: src/fdstream.c:302 #, fuzzy msgid "I/O helper exited abnormally" msgstr "자식 프로세스가 '%s'를 읽다가 비정상적으로 종료했습니다" #: src/fdstream.c:358 #, fuzzy msgid "Too many bytes to write to stream" msgstr "스트림에 쓸 수 없음" #: src/fdstream.c:373 src/fdstream.c:392 msgid "cannot write to stream" msgstr "스트림에 쓸 수 없음" #: src/fdstream.c:410 #, fuzzy msgid "Too many bytes to read from stream" msgstr "%s에서 도메인이 복구됨\n" #: src/fdstream.c:442 #, fuzzy msgid "cannot read from stream" msgstr "%s에서 읽을 수 없음" #: src/fdstream.c:490 src/rpc/virnetsocket.c:164 src/util/event_poll.c:666 #: src/util/virnodesuspend.c:66 #, fuzzy msgid "Unable to initialize mutex" msgstr "TLS 클라이언트를 초기화할 수 없음: %s" #: src/fdstream.c:520 #, fuzzy msgid "Unable to open UNIX socket" msgstr "%s를 열 수 없음" #: src/fdstream.c:563 #, fuzzy msgid "UNIX domain sockets are not supported on this platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/fdstream.c:591 #, fuzzy, c-format msgid "Unable to open stream for '%s'" msgstr "%s를 열 수 없음" #: src/fdstream.c:598 #, fuzzy, c-format msgid "Unable to access stream for '%s'" msgstr "장치 %s를 %s에 대해 허용할 수 없음" #: src/fdstream.c:606 src/util/iohelper.c:64 #, fuzzy, c-format msgid "Unable to seek %s to %llu" msgstr "위치 %lld로 %s에서 이동할 수 없음" #: src/fdstream.c:623 #, c-format msgid "%s: Cannot request read and write flags together" msgstr "" #: src/fdstream.c:630 src/lxc/lxc_process.c:1064 #, fuzzy msgid "Unable to create pipe" msgstr "파이프를 생성할 수 없" #: src/fdstream.c:681 #, c-format msgid "Attempt to create %s without specifying mode" msgstr "" #: src/hyperv/hyperv_driver.c:171 #, fuzzy msgid "Could not create openwsman client" msgstr "veth 이름을 생성할 수 없음" #: src/hyperv/hyperv_driver.c:177 #, fuzzy msgid "Could not initialize openwsman transport" msgstr "뮤텍스를 초기화할 수 없습니다." #: src/hyperv/hyperv_driver.c:198 #, c-format msgid "%s is not a Hyper-V server" msgstr "" #: src/hyperv/hyperv_driver.c:258 src/hyperv/hyperv_driver.c:300 #: src/hyperv/hyperv_driver.c:319 #, fuzzy, c-format msgid "Could not lookup %s" msgstr "파일 '%s'를 닫을 수 없음" #: src/hyperv/hyperv_driver.c:346 #, fuzzy, c-format msgid "CPU model %s too long for destination" msgstr "모델 %s가 목적지로는 너무 큼" #: src/hyperv/hyperv_driver.c:510 src/hyperv/hyperv_wmi.c:679 #, fuzzy, c-format msgid "No domain with UUID %s" msgstr "id %d인 도메인 없음" #: src/hyperv/hyperv_driver.c:543 #, fuzzy, c-format msgid "No domain with name %s" msgstr "%s라는 이름의 도메인 없음" #: src/hyperv/hyperv_driver.c:571 #, fuzzy msgid "Domain is not active" msgstr "도메인 상태" #: src/hyperv/hyperv_driver.c:600 #, fuzzy msgid "Domain is not paused" msgstr "도메인이 '%s'가 일시중지되지 않았습니다" #: src/hyperv/hyperv_driver.c:632 src/hyperv/hyperv_driver.c:1193 #, fuzzy msgid "Domain is not active or is in state transition" msgstr "도메인이 실행 상태가 아닙니다" #: src/hyperv/hyperv_driver.c:707 src/hyperv/hyperv_driver.c:728 #: src/hyperv/hyperv_driver.c:750 src/hyperv/hyperv_driver.c:849 #: src/hyperv/hyperv_driver.c:870 src/hyperv/hyperv_driver.c:892 #, fuzzy, c-format msgid "Could not lookup %s for domain %s" msgstr "잘못된 디스크 버스 유형 '%s'" #: src/hyperv/hyperv_driver.c:1070 #, fuzzy msgid "Domain is already active or is in state transition" msgstr "도메인이 이미 '%s'로 활성화되어 있습니다" #: src/hyperv/hyperv_driver.c:1248 #, fuzzy msgid "Domain has no managed save image" msgstr "도메인 저장 파일 '%s'를 만드는 데 실패" #: src/hyperv/hyperv_driver.c:1308 #, fuzzy, c-format msgid "openwsman error: %s" msgstr "내부 오류 %s" #: src/hyperv/hyperv_wmi.c:60 #, c-format msgid "Transport error during %s: %s (%d)" msgstr "" #: src/hyperv/hyperv_wmi.c:70 #, fuzzy, c-format msgid "Unexpected HTTP response during %s: %d" msgstr "예기치 못한 비디오 모델 %d" #: src/hyperv/hyperv_wmi.c:77 #, c-format msgid "Empty response during %s" msgstr "" #: src/hyperv/hyperv_wmi.c:92 #, c-format msgid "SOAP fault during %s: code '%s', subcode '%s', reason '%s', detail '%s'" msgstr "" #: src/hyperv/hyperv_wmi.c:144 src/hyperv/hyperv_wmi.c:426 #, fuzzy msgid "Could not initialize options" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/hyperv/hyperv_wmi.c:153 #, fuzzy msgid "Could not create filter" msgstr "veth 이름을 생성할 수 없음" #: src/hyperv/hyperv_wmi.c:180 #, fuzzy msgid "Could not lookup SOAP body" msgstr "잘못된 디스크 버스 유형 '%s'" #: src/hyperv/hyperv_wmi.c:188 #, fuzzy msgid "Could not lookup pull response" msgstr "잘못된 디스크 버스 유형 '%s'" #: src/hyperv/hyperv_wmi.c:196 #, fuzzy msgid "Could not lookup pull response items" msgstr "잘못된 디스크 버스 유형 '%s'" #: src/hyperv/hyperv_wmi.c:209 #, fuzzy msgid "Could not deserialize pull response item" msgstr "뮤텍스를 초기화할 수 없습니다." #: src/hyperv/hyperv_wmi.c:258 src/hyperv/hyperv_wmi.c:299 #, fuzzy msgid "Could not free deserialized data" msgstr "현재 시간을 얻을 수 없음" #: src/hyperv/hyperv_wmi.c:319 msgid "Completed with no error" msgstr "" #: src/hyperv/hyperv_wmi.c:322 src/hyperv/hyperv_wmi.c:358 #, fuzzy msgid "Not supported" msgstr "이벤트 지원 없음" #: src/hyperv/hyperv_wmi.c:328 msgid "Cannot complete within timeout period" msgstr "" #: src/hyperv/hyperv_wmi.c:331 src/hyperv/hyperv_wmi.c:352 #, fuzzy msgid "Failed" msgstr "popen 실패" #: src/hyperv/hyperv_wmi.c:334 src/hyperv/hyperv_wmi.c:367 #, fuzzy msgid "Invalid parameter" msgstr "잘못된 매개변수 '%s'" #: src/hyperv/hyperv_wmi.c:337 msgid "In use" msgstr "" #: src/hyperv/hyperv_wmi.c:340 #, fuzzy msgid "Transition started" msgstr "상태 없음" #: src/hyperv/hyperv_wmi.c:343 #, fuzzy msgid "Invalid state transition" msgstr "잘못된 매개변수 갯수" #: src/hyperv/hyperv_wmi.c:346 #, fuzzy msgid "Timeout parameter not supported" msgstr "비밀 저장소를 지원하지 않습니다" #: src/hyperv/hyperv_wmi.c:349 msgid "Busy" msgstr "" #: src/hyperv/hyperv_wmi.c:355 msgid "Access denied" msgstr "" #: src/hyperv/hyperv_wmi.c:361 msgid "Status is unknown" msgstr "" #: src/hyperv/hyperv_wmi.c:364 msgid "Timeout" msgstr "" #: src/hyperv/hyperv_wmi.c:370 #, fuzzy msgid "System is in use" msgstr "스트림이 열려있지 않습니다" #: src/hyperv/hyperv_wmi.c:373 #, fuzzy msgid "Invalid state for this operation" msgstr "잘못된 vport 작업 (%d)" #: src/hyperv/hyperv_wmi.c:376 #, fuzzy msgid "Incorrect data type" msgstr "경로 %s를 생성할 수 없음" #: src/hyperv/hyperv_wmi.c:379 #, fuzzy msgid "System is not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/hyperv/hyperv_wmi.c:382 tools/virsh.c:1922 tools/virsh.c:2000 #: tools/virsh.c:2412 tools/virsh.c:2418 tools/virsh-domain.c:3812 #: tools/virsh-domain.c:5303 tools/virsh-pool.c:964 tools/virsh-pool.c:1051 #: tools/virsh-snapshot.c:179 tools/virsh-snapshot.c:331 #: tools/virsh-volume.c:1269 msgid "Out of memory" msgstr "메모리 부족" #: src/hyperv/hyperv_wmi.c:385 #, fuzzy msgid "Unknown return code" msgstr "알려지지 않은 오류" #: src/hyperv/hyperv_wmi.c:446 src/hyperv/hyperv_wmi.c:463 #: src/hyperv/hyperv_wmi.c:480 #, fuzzy, c-format msgid "Could not lookup %s for %s invocation" msgstr "잘못된 디스크 버스 유형 '%s'" #: src/hyperv/hyperv_wmi.c:453 #, fuzzy, c-format msgid "Could not parse return code from '%s'" msgstr "버전 번호 %s를 '%s'에서 구문 분석할 수 없음" #: src/hyperv/hyperv_wmi.c:505 #, c-format msgid "Concrete job for %s invocation is in error state" msgstr "" #: src/hyperv/hyperv_wmi.c:511 #, c-format msgid "Concrete job for %s invocation is in unknown state" msgstr "" #: src/hyperv/hyperv_wmi.c:518 #, c-format msgid "Invocation of %s returned an error: %s (%d)" msgstr "" #: src/interface/netcf_driver.c:106 src/interface/netcf_driver.c:276 #, fuzzy, c-format msgid "couldn't find interface named '%s': %s%s%s" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/interface/netcf_driver.c:111 src/interface/netcf_driver.c:281 #, fuzzy, c-format msgid "couldn't find interface named '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/interface/netcf_driver.c:190 #, fuzzy, c-format msgid "failed to get number of interfaces on host: %s%s%s" msgstr "호스트 상의 인터페이스 갯수 가져오기 실패" #: src/interface/netcf_driver.c:210 #, fuzzy, c-format msgid "failed to list host interfaces: %s%s%s" msgstr "호스트 인터페이스 목록 얻기 실패" #: src/interface/netcf_driver.c:231 #, fuzzy, c-format msgid "failed to get number of defined interfaces on host: %s%s%s" msgstr "호스트상에 거절된 인터페이스 갯수 얻기 실패" #: src/interface/netcf_driver.c:252 #, fuzzy, c-format msgid "failed to list host defined interfaces: %s%s%s" msgstr "호스트에 정의된 인터페이스 목록 얻기 실패" #: src/interface/netcf_driver.c:309 #, fuzzy, c-format msgid "couldn't find interface with MAC address '%s': %s%s%s" msgstr "MAC 주소가 %s인 인터페이스를 찾을 수 없음" #: src/interface/netcf_driver.c:316 #, fuzzy, c-format msgid "couldn't find interface with MAC address '%s'" msgstr "MAC 주소가 %s인 인터페이스를 찾을 수 없음" #: src/interface/netcf_driver.c:322 msgid "multiple interfaces with matching MAC address" msgstr "동일한 MAC 주소에 인터페이스가 여러개 있음" #: src/interface/netcf_driver.c:362 src/interface/netcf_driver.c:419 #, fuzzy, c-format msgid "could not get interface XML description: %s%s%s" msgstr "%s상의 매체를 꺼내기할 수 없음" #: src/interface/netcf_driver.c:453 #, fuzzy, c-format msgid "failed to undefine interface %s: %s%s%s" msgstr "인터페이스 %s 정의를 해제하는 데 실패" #: src/interface/netcf_driver.c:487 #, fuzzy, c-format msgid "failed to create (start) interface %s: %s%s%s" msgstr "%s %s 인터페이스 상태 보기 실패" #: src/interface/netcf_driver.c:521 #, fuzzy, c-format msgid "failed to destroy (stop) interface %s: %s%s%s" msgstr "인터페이스 %s를 파괴하는 데 실패" #: src/interface/netcf_driver.c:552 #, fuzzy, c-format msgid "failed to get status of interface %s: %s%s%s" msgstr "%s %s 인터페이스 상태 보기 실패" #: src/interface/netcf_driver.c:581 #, fuzzy, c-format msgid "failed to begin transaction: %s%s%s" msgstr "%s %s 인터페이스 상태 보기 실패" #: src/interface/netcf_driver.c:604 #, fuzzy, c-format msgid "failed to commit transaction: %s%s%s" msgstr "polkit 동작 %s을 생성하는 데 실패했습니다" #: src/interface/netcf_driver.c:627 #, fuzzy, c-format msgid "failed to rollback transaction: %s%s%s" msgstr "polkit 동작 %s을 생성하는 데 실패했습니다" #: src/internal.h:235 #, fuzzy, c-format msgid "unsupported flags (0x%lx) in function %s" msgstr "지원되지 않는 플래그(0x%x)가 '%s'에 전달되었습니다" #: src/libvirt.c:555 src/libvirt.c:585 src/libvirt.c:615 src/libvirt.c:645 #: src/libvirt.c:675 src/libvirt.c:705 src/libvirt.c:738 src/libvirt.c:769 #, fuzzy, c-format msgid "Too many drivers, cannot register %s" msgstr "과도한 드라이버가 %s에 등록됨" #: src/libvirt.c:797 #, c-format msgid "Initialization of %s state driver failed" msgstr "" #: src/libvirt.c:974 msgid "Expected a list for 'uri_aliases' config parameter" msgstr "" #: src/libvirt.c:986 msgid "Expected a string for 'uri_aliases' config parameter list entry" msgstr "" #: src/libvirt.c:992 #, c-format msgid "" "Malformed 'uri_aliases' config entry '%s', expected 'alias=uri://host/path'" msgstr "" #: src/libvirt.c:1000 #, c-format msgid "" "Malformed 'uri_aliases' config entry '%s', aliases may only contain 'a-Z, " "0-9, _, -'" msgstr "" #: src/libvirt.c:1055 msgid "Expected a string for 'uri_default' config parameter" msgstr "" #: src/libvirt.c:1168 #, c-format msgid "libvirt was built without the '%s' driver" msgstr "" #: src/libvirt.c:1191 #, fuzzy, c-format msgid "No connection for URI %s" msgstr "하이퍼바이저 연결 URI" #: src/libvirt.c:2089 src/libvirt.c:10064 src/libvirt.c:11750 #: src/libvirt.c:14331 src/libvirt.c:15941 #, c-format msgid "uuidstr in %s must be a valid UUID" msgstr "" #: src/libvirt.c:2576 src/libvirt.c:2671 #, fuzzy msgid "could not build absolute output file path" msgstr "pidfile 경로를 설정하는 데 실패" #: src/libvirt.c:2660 src/libvirt.c:2798 src/libvirt.c:2947 msgid "running and paused flags are mutually exclusive" msgstr "" #: src/libvirt.c:2727 src/libvirt.c:2809 src/libvirt.c:2877 src/libvirt.c:2958 #, fuzzy msgid "could not build absolute input file path" msgstr "입력 경로 '%s'를 열 수 없음" #: src/libvirt.c:2866 #, fuzzy msgid "virDomainSaveImageGetXMLDesc with secure flag" msgstr "보안 플래그와 함께 virDomainGetXMLDesc" #: src/libvirt.c:3027 msgid "crash and live flags are mutually exclusive" msgstr "" #: src/libvirt.c:3033 msgid "crash and reset flags are mutually exclusive" msgstr "" #: src/libvirt.c:3039 msgid "live and reset flags are mutually exclusive" msgstr "" #: src/libvirt.c:3050 #, fuzzy msgid "could not build absolute core file path" msgstr "파일 '%s'를 닫을 수 없음" #: src/libvirt.c:3235 src/libvirt.c:3297 msgid "flags for acpi power button and guest agent are mutually exclusive" msgstr "" #: src/libvirt.c:3555 #, fuzzy, c-format msgid "result too large: %llu" msgstr "nparams가 너무 큽니다" #: src/libvirt.c:3756 #, fuzzy, c-format msgid "string parameter name '%.*s' too long" msgstr "설정 파일 이름이 너무 깂니다" #: src/libvirt.c:3765 #, fuzzy, c-format msgid "NULL string parameter '%s'" msgstr "잘못된 매개변수 '%s'" #: src/libvirt.c:3771 #, fuzzy, c-format msgid "string parameter '%s' unsupported" msgstr "비밀 저장소를 지원하지 않습니다" #: src/libvirt.c:3902 src/libvirt.c:4162 src/libvirt.c:6881 src/libvirt.c:8618 #: src/libvirt.c:8842 src/libvirt.c:9358 src/libvirt.c:19032 #, c-format msgid "flags 'affect live' and 'affect config' in %s are mutually exclusive" msgstr "" #: src/libvirt.c:4362 msgid "virDomainGetXMLDesc with secure flag" msgstr "보안 플래그와 함께 virDomainGetXMLDesc" #: src/libvirt.c:4544 msgid "domainMigratePrepare did not set uri" msgstr "domainMigratePrepare가 uri를 설정하지 않았음" #: src/libvirt.c:4656 src/qemu/qemu_migration.c:2244 msgid "domainMigratePrepare2 did not set uri" msgstr "domainMigratePrepare2가 uri를 설정하지 않았음" #: src/libvirt.c:4802 src/qemu/qemu_migration.c:2381 #, fuzzy msgid "domainMigratePrepare3 did not set uri" msgstr "domainMigratePrepare가 uri를 설정하지 않았음" #: src/libvirt.c:4949 src/libvirt.c:4957 #, fuzzy, c-format msgid "unable to parse server from dconnuri in %s" msgstr "서버 인증서를 검증할 수 없음: %s" #: src/libvirt.c:4986 src/libvirt.c:5058 src/libvirt.c:5440 src/libvirt.c:5452 #, fuzzy msgid "Unable to change target guest XML during migration" msgstr "루트 디렉터리로 cd하기 실패" #: src/libvirt.c:4991 #, fuzzy msgid "Unable to override peer2peer migration URI" msgstr "피어간 이전" #: src/libvirt.c:5213 src/libvirt.c:5415 #, fuzzy msgid "cannot enforce change protection" msgstr "루트 디렉터리로 cd하기 실패: %s" #: src/libvirt.c:5219 src/libvirt.c:5421 msgid "cannot perform tunnelled migration without using peer2peer flag" msgstr "peer2peer 플래그 설정 없이 터널링을 사용한 이전을 수행할 수 없음" #: src/libvirt.c:5583 src/libvirt.c:5719 #, fuzzy msgid "direct migration is not supported by the connection driver" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/libvirt.c:6009 src/libvirt.c:6177 #, fuzzy, c-format msgid "conn in %s must match stream connection" msgstr "연결 없으 비밀 정보를 찾을 수 없습니다" #: src/libvirt.c:6515 #, c-format msgid "cpuNum in %s only accepts %d as a negative value" msgstr "" #: src/libvirt.c:6604 #, c-format msgid "cellNum in %s only accepts %d as a negative value" msgstr "" #: src/libvirt.c:7075 src/libvirt.c:7220 #, c-format msgid "size in %s must not exceed %zu" msgstr "" #: src/libvirt.c:7695 #, fuzzy, c-format msgid "flags in %s must include VIR_MEMORY_VIRTUAL or VIR_MEMORY_PHYSICAL" msgstr "" "플래그 매개변수는 VIR_MEMORY_VIRTUAL이거나 VIR_MEMORY_PHYSICAL이어야 합니다" #: src/libvirt.c:8554 src/libvirt.c:8685 src/libvirt.c:8765 #, fuzzy, c-format msgid "input too large: %u" msgstr "nparams가 너무 큽니다" #: src/libvirt.c:8833 src/libvirt.c:9064 #, fuzzy, c-format msgid "input too large: %d * %d" msgstr "nparams가 너무 큽니다" #: src/libvirt.c:8982 #, fuzzy, c-format msgid "input too large: 1 * %d" msgstr "nparams가 너무 큽니다" #: src/libvirt.c:9282 #, c-format msgid "metadata title in %s can't contain newlines" msgstr "" #: src/libvirt.c:13434 #, c-format msgid "capacity in %s cannot be zero without 'delta' or 'shrink' flags set" msgstr "" #: src/libvirt.c:15134 msgid "data sources cannot be used for non-blocking streams" msgstr "데이터 소스는 비-블러킹 스트림에 사용할 수 없습니다" #: src/libvirt.c:15233 msgid "data sinks cannot be used for non-blocking streams" msgstr "데이터 싱크는 비-블러킹 스트림에 사용할 수 없습니다" #: src/libvirt.c:16736 #, c-format msgid "eventID in %s must be less than %d" msgstr "" #: src/libvirt.c:16845 src/libvirt.c:18003 #, c-format msgid "running and paused flags in %s are mutually exclusive" msgstr "" #: src/libvirt.c:17148 #, c-format msgid "use of 'current' flag in %s requires 'redefine' flag" msgstr "" #: src/libvirt.c:17155 #, c-format msgid "'redefine' and 'no metadata' flags in %s are mutually exclusive" msgstr "" #: src/libvirt.c:17162 #, c-format msgid "'redefine' and 'halt' flags in %s are mutually exclusive" msgstr "" #: src/libvirt.c:17216 #, fuzzy msgid "virDomainSnapshotGetXMLDesc with secure flag" msgstr "보안 플래그와 함께 virDomainGetXMLDesc" #: src/libvirt.c:18071 #, c-format msgid "children and children_only flags in %s are mutually exclusive" msgstr "" #: src/libvirt.c:18585 #, c-format msgid "use of flags in %s requires a copy job" msgstr "" #: src/libvirt.c:18652 #, fuzzy, c-format msgid "Unable to access file descriptor %d" msgstr "설정 파일 핸들을 저장하는 데 실패했습니다." #: src/libvirt.c:18658 #, fuzzy, c-format msgid "fd %d in %s must be a socket" msgstr "소켓 생성 실패" #: src/libvirt.c:18826 #, fuzzy msgid "A close callback is already registered" msgstr "도메인 '%s'가 uuid %s로 이미 정의되어 있습니다" #: src/libvirt.c:18876 #, fuzzy msgid "A different callback was requested" msgstr "이벤트 콜백이 이미 추적되었습니다" #: src/libvirt.c:19158 #, c-format msgid "ncpus in %s must be 1 when start_cpu is -1" msgstr "" #: src/libvirt.c:19173 #, fuzzy, c-format msgid "input too large: %u * %u" msgstr "nparams가 너무 큽니다" #: src/libvirt-qemu.c:164 #, fuzzy, c-format msgid "pid_value in %s is too large" msgstr "nparams가 너무 큽니다" #: src/locking/lock_driver_sanlock.c:99 #, fuzzy, c-format msgid "Unable to access config file %s" msgstr "%s 장치를 허용할 수 없음" #: src/locking/lock_driver_sanlock.c:168 #, c-format msgid "Lockspace path '%s' exceeded %d characters" msgstr "" #: src/locking/lock_driver_sanlock.c:186 #, c-format msgid "" "Unable to create lockspace %s: parent directory does not exist or is not a " "directory" msgstr "" #: src/locking/lock_driver_sanlock.c:195 src/locking/lock_driver_sanlock.c:573 #, fuzzy, c-format msgid "Unable to create lockspace %s" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:204 src/locking/lock_driver_sanlock.c:582 #, fuzzy, c-format msgid "Unable to query sector size %s: error %d" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:208 src/locking/lock_driver_sanlock.c:586 #, fuzzy, c-format msgid "Unable to query sector size %s" msgstr "%s를 열 수 없음" #: src/locking/lock_driver_sanlock.c:218 #, fuzzy, c-format msgid "Unable to allocate lockspace %s" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:225 #, fuzzy, c-format msgid "Unable to save lockspace %s" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:233 #, fuzzy, c-format msgid "Unable to initialize lockspace %s: error %d" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:237 #, fuzzy, c-format msgid "Unable to initialize lockspace %s" msgstr "인증서를 초기화할 수 없습니다: %s" #: src/locking/lock_driver_sanlock.c:254 #, fuzzy, c-format msgid "Unable to add lockspace %s: error %d" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:258 #, fuzzy, c-format msgid "Unable to add lockspace %s" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:311 msgid "Automatic disk lease mode enabled, but no host ID is set" msgstr "" #: src/locking/lock_driver_sanlock.c:353 msgid "Sanlock plugin is not initialized" msgstr "" #: src/locking/lock_driver_sanlock.c:359 #, fuzzy, c-format msgid "Unsupported object type %d" msgstr "지원하지 않는 모니터 유형 '%s'" #: src/locking/lock_driver_sanlock.c:378 src/locking/lock_driver_sanlock.c:718 #, c-format msgid "Domain name '%s' exceeded %d characters" msgstr "" #: src/locking/lock_driver_sanlock.c:424 msgid "String length too small to store md5 checksum" msgstr "" #: src/locking/lock_driver_sanlock.c:430 #, fuzzy msgid "Unable to compute md5 checksum" msgstr "%s를 열 수 없음" #: src/locking/lock_driver_sanlock.c:462 #, c-format msgid "Resource name '%s' exceeds %d characters" msgstr "" #: src/locking/lock_driver_sanlock.c:471 src/locking/lock_driver_sanlock.c:535 #, c-format msgid "Lease path '%s' exceeds %d characters" msgstr "" #: src/locking/lock_driver_sanlock.c:480 src/locking/lock_driver_sanlock.c:544 #, c-format msgid "Resource lockspace '%s' exceeds %d characters" msgstr "" #: src/locking/lock_driver_sanlock.c:514 #, fuzzy msgid "Unexpected lock parameters for disk resource" msgstr "IDE 디스크에 대해 예기치 못한 주소 유형" #: src/locking/lock_driver_sanlock.c:596 #, fuzzy, c-format msgid "Unable to allocate lease %s" msgstr "%s 장치를 허용할 수 없음" #: src/locking/lock_driver_sanlock.c:603 #, fuzzy, c-format msgid "Unable to save lease %s" msgstr "파일 %s 저장 실패" #: src/locking/lock_driver_sanlock.c:611 #, fuzzy, c-format msgid "Unable to initialize lease %s: error %d" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:615 #, fuzzy, c-format msgid "Unable to initialize lease %s" msgstr "TLS 클라이언트를 초기화할 수 없음: %s" #: src/locking/lock_driver_sanlock.c:646 #, fuzzy, c-format msgid "Too many resources %d for object" msgstr "qcow 암호화에 대해 너무 많은 비밀 정보" #: src/locking/lock_driver_sanlock.c:707 msgid "" "Read/write, exclusive access, disks were present, but no leases specified" msgstr "" #: src/locking/lock_driver_sanlock.c:729 #, fuzzy, c-format msgid "Unable to parse lock state %s: error %d" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:733 #, fuzzy, c-format msgid "Unable to parse lock state %s" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:754 #, fuzzy, c-format msgid "Failed to open socket to sanlock daemon: error %d" msgstr "소켓을 '%s'로 바인드 하는 것이 실패했습니다: %s " #: src/locking/lock_driver_sanlock.c:758 #, fuzzy msgid "Failed to open socket to sanlock daemon" msgstr "소켓을 '%s'로 바인드 하는 것이 실패했습니다: %s " #: src/locking/lock_driver_sanlock.c:769 #, fuzzy, c-format msgid "Failed to acquire lock: error %d" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:772 #, fuzzy msgid "Failed to acquire lock" msgstr "소켓 생성 실패" #: src/locking/lock_driver_sanlock.c:793 #, fuzzy, c-format msgid "Failed to restrict process: error %d" msgstr "풀 %s를 시작하는 데 실패" #: src/locking/lock_driver_sanlock.c:796 #, fuzzy msgid "Failed to restrict process" msgstr "풀 %s를 시작하는 데 실패" #: src/locking/lock_driver_sanlock.c:842 src/locking/lock_driver_sanlock.c:886 #, fuzzy, c-format msgid "Failed to inquire lock: error %d" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:845 src/locking/lock_driver_sanlock.c:889 #, fuzzy msgid "Failed to inquire lock" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:857 #, fuzzy, c-format msgid "Failed to release lock: error %d" msgstr "블럭 이름 %s 구문 분석 실패" #: src/locking/lock_driver_sanlock.c:860 #, fuzzy msgid "Failed to release lock" msgstr "소켓 생성 실패" #: src/locking/lock_manager.c:45 src/locking/lock_manager.c:53 #, c-format msgid "Missing '%s' field in lock manager driver" msgstr "" #: src/locking/lock_manager.c:152 #, fuzzy, c-format msgid "Plugin %s not accessible" msgstr "비활성화" #: src/locking/lock_manager.c:160 #, fuzzy, c-format msgid "Failed to load plugin %s: %s" msgstr "%s를 %s로 마운트하는 데 실패" #: src/locking/lock_manager.c:167 msgid "Missing plugin initialization symbol 'virLockDriverImpl'" msgstr "" #: src/locking/lock_manager.c:205 msgid "this platform is missing dlopen" msgstr "" #: src/lxc/lxc_cgroup.c:41 src/qemu/qemu_cgroup.c:397 #, fuzzy, c-format msgid "Unable to set io cpu shares for domain %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/lxc/lxc_cgroup.c:50 #, fuzzy, c-format msgid "Unable to set io cpu quota for domain %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/lxc/lxc_cgroup.c:59 #, fuzzy, c-format msgid "Unable to set io cpu period for domain %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/lxc/lxc_cgroup.c:79 #, fuzzy, c-format msgid "Unable to set Blkio weight for domain %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/lxc/lxc_cgroup.c:100 #, c-format msgid "Unable to set memory limit for domain %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/lxc/lxc_cgroup.c:109 src/qemu/qemu_cgroup.c:360 #, fuzzy, c-format msgid "Unable to set memory hard limit for domain %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/lxc/lxc_cgroup.c:119 src/qemu/qemu_cgroup.c:368 #, fuzzy, c-format msgid "Unable to set memory soft limit for domain %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/lxc/lxc_cgroup.c:129 src/qemu/qemu_cgroup.c:378 #, fuzzy, c-format msgid "Unable to set swap hard limit for domain %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/lxc/lxc_cgroup.c:171 #, c-format msgid "Unable to deny devices for domain %s" msgstr "도메인 %s에 대한 장치를 거부할 수 없음" #: src/lxc/lxc_cgroup.c:185 #, c-format msgid "Unable to allow device %c:%d:%d for domain %s" msgstr "장치 %c:%d:%d를 도메인 %s에 대해 허용할 수 없음" #: src/lxc/lxc_cgroup.c:202 #, fuzzy, c-format msgid "Unable to allow device %s for domain %s" msgstr "도메인 %s에 대한 PYT 장치를 허용할 수 없음" #: src/lxc/lxc_cgroup.c:212 #, fuzzy, c-format msgid "Unable to allow PTY devices for domain %s" msgstr "도메인 %s에 대한 PYT 장치를 허용할 수 없음" #: src/lxc/lxc_cgroup.c:236 msgid "Unable to get cgroup for driver" msgstr "드라이버에 대한 cgroup을 얻을 수 없음" #: src/lxc/lxc_cgroup.c:243 #, c-format msgid "Unable to create cgroup for domain %s" msgstr "도메인 %s에 대한 cgroup을 생성할 수 없음" #: src/lxc/lxc_cgroup.c:263 #, c-format msgid "Unable to add task %d to cgroup for domain %s" msgstr "작업 %d를 도메인 %s에 대한 cgroup에 추가할 수 없음" #: src/lxc/lxc_container.c:146 #, fuzzy, c-format msgid "Malformed ctrl-alt-del setting '%s'" msgstr "잘못된 형식의 볼륨 확장 오프셋 값" #: src/lxc/lxc_container.c:164 #, fuzzy msgid "Unable to clone to check reboot support" msgstr "루트 디렉터리로 cd하기 실패" #: src/lxc/lxc_container.c:230 msgid "setsid failed" msgstr "setsid가 실패했습니다" #: src/lxc/lxc_container.c:236 msgid "ioctl(TIOCSTTY) failed" msgstr "ioctl(TIOCSTTY)가 실패했습니다" #: src/lxc/lxc_container.c:251 msgid "dup2(stdin) failed" msgstr "dup2(stdin)가 실패했습니다" #: src/lxc/lxc_container.c:257 msgid "dup2(stdout) failed" msgstr "dup2(stdout)가 실패했습니다" #: src/lxc/lxc_container.c:263 msgid "dup2(stderr) failed" msgstr "dup2(stderr)가 실패했습니다" #: src/lxc/lxc_container.c:419 msgid "Failed to make root private" msgstr "루트를 전용으로 만들 수 없음" #: src/lxc/lxc_container.c:430 src/lxc/lxc_container.c:452 #: src/lxc/lxc_container.c:748 src/lxc/lxc_container.c:1029 #: src/lxc/lxc_container.c:1091 #, c-format msgid "Failed to create %s" msgstr "%s 생성 실패" #: src/lxc/lxc_container.c:439 #, c-format msgid "Failed to mount empty tmpfs at %s" msgstr "%s에 tmpfs를 마운트하는 데 실패" #: src/lxc/lxc_container.c:460 #, c-format msgid "Failed to bind new root %s into tmpfs" msgstr "새로운 루트 %s를 tmpfs로 바인드하는 데 실패" #: src/lxc/lxc_container.c:468 #, fuzzy, c-format msgid "Failed to make new root %s readonly" msgstr "루트를 전용으로 만들 수 없음" #: src/lxc/lxc_container.c:478 #, c-format msgid "Failed to chroot into %s" msgstr "%s로 chroot 하는 데 실패" #: src/lxc/lxc_container.c:486 msgid "Failed to pivot root" msgstr "root를 변경하는 데 실패" #: src/lxc/lxc_container.c:543 #, c-format msgid "Failed to mkdir %s" msgstr "mkdir %s에 실패" #: src/lxc/lxc_container.c:559 src/lxc/lxc_container.c:582 #: src/lxc/lxc_container.c:1444 #, fuzzy, c-format msgid "Failed to mount %s on %s type %s" msgstr "%s를 %s로 마운트하는 데 실패" #: src/lxc/lxc_container.c:609 msgid "Cannot create /dev/pts" msgstr "/dev/pts를 만들 수 없음" #: src/lxc/lxc_container.c:616 msgid "Failed to mount /dev/pts in container" msgstr "컨테이너의 /dev/pts를 마운트하는 데 실패" #: src/lxc/lxc_container.c:659 #, c-format msgid "Failed to make device %s" msgstr "장치 %s를 만드는 데 실패" #: src/lxc/lxc_container.c:668 #, fuzzy, c-format msgid "Failed to symlink device %s to %s" msgstr "심볼릭 링크 '%s'를 '%s'에 대해 생성하는 데 실패" #: src/lxc/lxc_container.c:681 #, fuzzy msgid "Failed to bind /dev/pts/ptmx on to /dev/ptmx" msgstr "/dev/pts/ptmx에 대해 /dev/ptmx 심볼릭 링크를 만드는 데 실패" #: src/lxc/lxc_container.c:690 msgid "Failed to make device /dev/ptmx" msgstr "/dev/ptmx 장치를 만드는 데 실패" #: src/lxc/lxc_container.c:704 #, fuzzy, c-format msgid "Failed to symlink %s to %s" msgstr "심볼릭 링크 '%s'를 '%s'에 대해 생성하는 데 실패" #: src/lxc/lxc_container.c:712 #, fuzzy, c-format msgid "Failed to symlink %s to /dev/console" msgstr "/dev/tty1에 대한 심볼릭 링크 /dev/pts/0을 만드는 데 실패" #: src/lxc/lxc_container.c:735 #, fuzzy, c-format msgid "Unable to stat bind target %s" msgstr "PCI 장치 %s를 리셋할 수 없음: %s" #: src/lxc/lxc_container.c:741 #, fuzzy, c-format msgid "Unable to stat bind source %s" msgstr "PCI 장치 %s를 리셋할 수 없음: %s" #: src/lxc/lxc_container.c:758 #, fuzzy, c-format msgid "Failed to create bind target %s" msgstr "파이프 생성에 실패했습니다: %s" #: src/lxc/lxc_container.c:765 #, fuzzy, c-format msgid "Failed to close bind target %s" msgstr "tty %s를 여는 데 실패" #: src/lxc/lxc_container.c:774 #, fuzzy, c-format msgid "Failed to bind mount directory %s to %s" msgstr "%s 모니터 디렉터리 연결 실패: %s" #: src/lxc/lxc_container.c:783 src/lxc/lxc_container.c:1107 #, fuzzy, c-format msgid "Failed to make directory %s readonly" msgstr "디렉터리 '%s' 생성 실패" #: src/lxc/lxc_container.c:810 #, fuzzy, c-format msgid "Unable to open filesystem %s" msgstr "%s를 열 수 없음" #: src/lxc/lxc_container.c:816 #, fuzzy msgid "Unable to create blkid library handle" msgstr "%s로의 이전을 시작할 수 없음" #: src/lxc/lxc_container.c:821 #, fuzzy, c-format msgid "Unable to associate device %s with blkid library" msgstr "vlan없이 네트워크 장치를 부착할 수 없음" #: src/lxc/lxc_container.c:837 #, fuzzy, c-format msgid "Too many filesystems detected for %s" msgstr "%s에서 도메인이 복구됨\n" #: src/lxc/lxc_container.c:841 #, fuzzy, c-format msgid "Unable to detect filesystem for %s" msgstr "장치 %s를 %s에 대해 허용할 수 없음" #: src/lxc/lxc_container.c:849 #, fuzzy, c-format msgid "Unable to find filesystem type for %s" msgstr "예기치 못한 파일시스템 유형 %d" #: src/lxc/lxc_container.c:922 src/util/iohelper.c:152 #, fuzzy, c-format msgid "Unable to read %s" msgstr "%s를 열 수 없음" #: src/lxc/lxc_container.c:952 #, fuzzy, c-format msgid "%s has unexpected '*' before last line" msgstr "스트림이 예기치 못하게 종료했습니다" #: src/lxc/lxc_container.c:975 #, fuzzy, c-format msgid "Failed to mount device %s to %s" msgstr "devpts를 %s에 마운트하는 데 실패" #: src/lxc/lxc_container.c:998 #, fuzzy, c-format msgid "Failed to mount device %s to %s, unable to detect filesystem" msgstr "타겟 목록을 얻기 위해 %s를 실행하는 데 실패했습니다" #: src/lxc/lxc_container.c:1041 #, fuzzy, c-format msgid "Failed to mount device %s to %s as %s" msgstr "%s를 %s로 마운트하는 데 실패" #: src/lxc/lxc_container.c:1098 #, fuzzy, c-format msgid "Failed to mount directory %s as tmpfs" msgstr "%s 모니터 디렉터리 연결 실패: %s" #: src/lxc/lxc_container.c:1146 #, fuzzy, c-format msgid "Unexpected filesystem type %s" msgstr "예기치 못한 파일시스템 유형 %d" #: src/lxc/lxc_container.c:1151 #, fuzzy, c-format msgid "Cannot mount filesystem type %s" msgstr "알려지지 않은 파일 시스템 유형 '%s'" #: src/lxc/lxc_container.c:1198 src/lxc/lxc_container.c:1329 msgid "Failed to read /proc/mounts" msgstr "/proc/mounts를 읽는 데 실패" #: src/lxc/lxc_container.c:1262 #, fuzzy, c-format msgid "Failed to unmount '%s' and could not detach subtree '%s'" msgstr "%s를 %s로 마운트하는 데 실패" #: src/lxc/lxc_container.c:1270 #, fuzzy, c-format msgid "Failed to unmount '%s' and could not unmount old root '%s'" msgstr "%s를 %s로 마운트하는 데 실패" #: src/lxc/lxc_container.c:1358 #, fuzzy, c-format msgid "Unable to read directory %s" msgstr "디렉터리 '%s' 생성 실패" #: src/lxc/lxc_container.c:1381 #, fuzzy, c-format msgid "Unable to resolve link %s" msgstr "링크 제거 실패: %s" #: src/lxc/lxc_container.c:1430 src/lxc/lxc_container.c:1464 #, fuzzy, c-format msgid "Unable to create directory %s" msgstr "디렉터리 '%s' 생성 실패" #: src/lxc/lxc_container.c:1456 #, fuzzy, c-format msgid "Unable to symlink directory %s to %s" msgstr "심볼릭 링크 '%s'를 '%s'에 대해 생성하는 데 실패" #: src/lxc/lxc_container.c:1472 #, fuzzy, c-format msgid "Failed to mount %s on %s" msgstr "%s를 %s에 마운트하는 데 실패" #: src/lxc/lxc_container.c:1567 msgid "Failed to make / slave" msgstr "/를 슬레이브로 만드는 데 실패" #: src/lxc/lxc_container.c:1574 #, fuzzy msgid "Failed to make root readonly" msgstr "루트를 전용으로 만들 수 없음" #: src/lxc/lxc_container.c:1679 #, c-format msgid "Failed to remove capabilities: %d" msgstr "기능 제거에 실패: %d" #: src/lxc/lxc_container.c:1685 #, c-format msgid "Failed to apply capabilities: %d" msgstr "기능 적용에 실패: %d" #: src/lxc/lxc_container.c:1727 msgid "lxcChild() passed invalid vm definition" msgstr "lxcChild()가 잘못된 vm 정의를 받았습니다" #: src/lxc/lxc_container.c:1763 #, c-format msgid "Failed to open tty %s" msgstr "tty %s를 여는 데 실패" #: src/lxc/lxc_container.c:1775 #, c-format msgid "cannot find init path '%s' relative to container root" msgstr "" #: src/lxc/lxc_container.c:1783 msgid "Failed to read the container continue message" msgstr "컨테이너 계속 메시지를 읽을 수 없음" #: src/lxc/lxc_container.c:1802 #, fuzzy msgid "failed to send continue signal to controller" msgstr "모니터 소켓 연결 실패" #: src/lxc/lxc_container.c:1918 msgid "Failed to run clone container" msgstr "복제 컨테이너를 실행하는 데 실패" #: src/lxc/lxc_conf.c:81 src/qemu/qemu_driver.c:346 src/uml/uml_conf.c:91 #, fuzzy msgid "cannot get the host uuid" msgstr "시간을 가져올 수 없음" #: src/lxc/lxc_controller.c:201 #, fuzzy msgid "Unable to close loop device" msgstr "%s 장치를 허용할 수 없음" #: src/lxc/lxc_controller.c:297 #, fuzzy msgid "Unable to set console file descriptor non-blocking" msgstr "모니터를 비-블로킹 모드로 설정할 수 없음" #: src/lxc/lxc_controller.c:309 #, fuzzy msgid "error sending continue signal to daemon" msgstr "모니터 소켓 연결 실패" #: src/lxc/lxc_controller.c:321 #, c-format msgid "expecting %d veths, but got %zu" msgstr "" #: src/lxc/lxc_controller.c:334 #, c-format msgid "expecting %d consoles, but got %zu tty file handlers" msgstr "" #: src/lxc/lxc_controller.c:413 src/qemu/qemu_process.c:1721 msgid "Host kernel is not aware of NUMA." msgstr "" #: src/lxc/lxc_controller.c:425 src/qemu/qemu_process.c:1732 #, c-format msgid "Host cannot support NUMA node %d" msgstr "" #: src/lxc/lxc_controller.c:454 src/qemu/qemu_process.c:1761 msgid "NUMA memory tuning in 'preferred' mode only supports single node" msgstr "" #: src/lxc/lxc_controller.c:465 #, fuzzy, c-format msgid "Unable to set NUMA policy %s" msgstr "파일 %s 저장 실패" #: src/lxc/lxc_controller.c:480 #, fuzzy msgid "NUMA policy is not available on this platform" msgstr "이 플랫폼에 사용 가능한 NUMA 메모리 정보가 없음" #: src/lxc/lxc_controller.c:665 #, c-format msgid "failed to apply capabilities: %d" msgstr "기능 적용에 실패: %d" #: src/lxc/lxc_controller.c:741 src/lxc/lxc_controller.c:777 #, fuzzy msgid "Unable to add epoll fd" msgstr "%s를 열 수 없음" #: src/lxc/lxc_controller.c:752 src/lxc/lxc_controller.c:789 #, fuzzy msgid "Unable to remove epoll fd" msgstr "파이프를 생성할 수 없" #: src/lxc/lxc_controller.c:819 #, fuzzy msgid "Unable to wait on epoll" msgstr "'%s'를 읽는 프로세스를 wait하는 것에 실패" #: src/lxc/lxc_controller.c:877 #, fuzzy msgid "Unable to read container pty" msgstr "Xen 데몬에서 읽기 실패" #: src/lxc/lxc_controller.c:905 #, fuzzy msgid "Unable to write to container pty" msgstr "파이프에 수 없음" #: src/lxc/lxc_controller.c:971 #, fuzzy msgid "Unable to create epoll fd" msgstr "파이프를 생성할 수 없" #: src/lxc/lxc_controller.c:981 #, fuzzy msgid "Unable to watch epoll FD" msgstr "'%s'를 읽는 프로세스를 wait하는 것에 실패" #: src/lxc/lxc_controller.c:991 src/lxc/lxc_controller.c:1001 #, fuzzy msgid "Unable to watch host console PTY" msgstr "USB 디스크 %s를 추가할 수 없음: %s" #: src/lxc/lxc_controller.c:1087 #, fuzzy, c-format msgid "Unable to request personality for %s on %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/lxc/lxc_controller.c:1160 #, c-format msgid "Expected exactly one console, but got %zu" msgstr "" #: src/lxc/lxc_controller.c:1194 #, fuzzy, c-format msgid "root source %s does not exist" msgstr "인터페이스 %s가 존재하지 않습니다" #: src/lxc/lxc_controller.c:1201 msgid "Cannot unshare mount namespace" msgstr "마운트 이름공간을 공유 해제 할 수 없음" #: src/lxc/lxc_controller.c:1207 msgid "Failed to switch root mount into slave mode" msgstr "루트 마운트를 슬레이브 모드로 전환하는 데 실패" #: src/lxc/lxc_controller.c:1219 #, c-format msgid "Failed to make path %s" msgstr "경로 %s를 만드는 데 실패" #: src/lxc/lxc_controller.c:1236 #, c-format msgid "Failed to mount devpts on %s" msgstr "devpts를 %s에 마운트하는 데 실패" #: src/lxc/lxc_controller.c:1268 src/lxc/lxc_controller.c:1277 #: src/lxc/lxc_process.c:1033 msgid "Failed to allocate tty" msgstr "tty 할당 실패" #: src/lxc/lxc_controller.c:1378 msgid "sockpair failed" msgstr "sockpair가 실패했습니다" #: src/lxc/lxc_controller.c:1384 #, fuzzy msgid "socketpair failed" msgstr "sockpair가 실패했습니다" #: src/lxc/lxc_controller.c:1420 msgid "Unable to send container continue message" msgstr "컨테이너 계속 메시지를 전송할 수 없음" #: src/lxc/lxc_controller.c:1426 #, fuzzy msgid "error receiving signal from container" msgstr "넷링크 소켓에서 수신할 수 없습니다" #: src/lxc/lxc_controller.c:1635 #, c-format msgid "Unable to write pid file '%s/%s.pid'" msgstr "pid 파일 '%s/%s.pid' 쓰기 실패" #: src/lxc/lxc_controller.c:1649 msgid "Unable to change to root dir" msgstr "루트 디렉터리로 cd하기 실패" #: src/lxc/lxc_controller.c:1655 msgid "Unable to become session leader" msgstr "세션 리더가 되는 데 실패" #: src/lxc/lxc_driver.c:133 #, c-format msgid "Unexpected LXC URI path '%s', try lxc:///" msgstr "예기치 못한 LXC URI 경로 '%s', 다음을 시도해 보십시오: lxc:///" #: src/lxc/lxc_driver.c:141 msgid "lxc state driver is not active" msgstr "lxc 상태 드라이버가 작동중이 아닙니다" #: src/lxc/lxc_driver.c:210 #, fuzzy, c-format msgid "No domain with matching id %d" msgstr "id가 %d와 일치하는 도메인이 없음" #: src/lxc/lxc_driver.c:239 src/lxc/lxc_driver.c:293 src/lxc/lxc_driver.c:318 #: src/lxc/lxc_driver.c:342 src/lxc/lxc_driver.c:477 src/lxc/lxc_driver.c:534 #: src/lxc/lxc_driver.c:600 src/lxc/lxc_driver.c:627 src/lxc/lxc_driver.c:658 #: src/lxc/lxc_driver.c:683 src/lxc/lxc_driver.c:715 src/lxc/lxc_driver.c:790 #: src/lxc/lxc_driver.c:860 src/lxc/lxc_driver.c:953 src/lxc/lxc_driver.c:991 #: src/lxc/lxc_driver.c:1316 src/lxc/lxc_driver.c:2247 #: src/lxc/lxc_driver.c:2302 src/lxc/lxc_driver.c:2329 #: src/lxc/lxc_driver.c:2497 src/lxc/lxc_driver.c:2562 #: src/libxl/libxl_driver.c:1312 src/libxl/libxl_driver.c:1370 #: src/libxl/libxl_driver.c:1428 src/libxl/libxl_driver.c:1481 #: src/libxl/libxl_driver.c:1524 src/libxl/libxl_driver.c:1579 #: src/libxl/libxl_driver.c:1920 src/libxl/libxl_driver.c:2018 #: src/libxl/libxl_driver.c:2108 src/libxl/libxl_driver.c:2174 #: src/libxl/libxl_driver.c:2203 src/libxl/libxl_driver.c:2713 #: src/libxl/libxl_driver.c:3454 src/libxl/libxl_driver.c:3482 #: src/vmware/vmware_driver.c:659 #, c-format msgid "No domain with matching uuid '%s'" msgstr "uuid '%s'와 일치하는 도메인 없음" #: src/lxc/lxc_driver.c:265 #, fuzzy, c-format msgid "No domain with matching name '%s'" msgstr "이름이 '%s'와 일치하는 도메인이 없음" #: src/lxc/lxc_driver.c:424 src/lxc/lxc_driver.c:997 src/lxc/lxc_driver.c:1078 msgid "System lacks NETNS support" msgstr "시스템에 NETNS 지원이 없습니다" #: src/lxc/lxc_driver.c:483 msgid "Cannot undefine transient domain" msgstr "임시 도메인의 정의를 취소할 수 없음" #: src/lxc/lxc_driver.c:546 src/lxc/lxc_driver.c:739 src/lxc/lxc_driver.c:873 #, c-format msgid "Unable to get cgroup for %s" msgstr "%s에 대한 cgroup을 얻을 수 없음" #: src/lxc/lxc_driver.c:552 msgid "Cannot read cputime for domain" msgstr "도메인에 대한 cputime을 읽을 수 없음" #: src/lxc/lxc_driver.c:557 msgid "Cannot read memory usage for domain" msgstr "도메인에 대한 메모리 사용량을 읽을 수 없음" #: src/lxc/lxc_driver.c:689 msgid "Cannot set max memory lower than current memory" msgstr "최대 메모리를 현재 메모리보다 적게 설정할 수 없음" #: src/lxc/lxc_driver.c:721 msgid "Cannot set memory higher than max memory" msgstr "최대 메모리보다 더 높게 메모리를 설정할 수 없음" #: src/lxc/lxc_driver.c:727 src/lxc/lxc_driver.c:1322 #: src/lxc/lxc_driver.c:2253 src/lxc/lxc_driver.c:2503 #: src/lxc/lxc_driver.c:2568 src/libxl/libxl_driver.c:1316 #: src/libxl/libxl_driver.c:1375 src/libxl/libxl_driver.c:1434 #: src/libxl/libxl_driver.c:1487 src/libxl/libxl_driver.c:1530 #: src/libxl/libxl_driver.c:1925 src/libxl/libxl_driver.c:2023 #: src/libxl/libxl_driver.c:2113 src/libxl/libxl_driver.c:2401 #: src/libxl/libxl_driver.c:2509 src/libxl/libxl_driver.c:3262 #: src/libxl/libxl_driver.c:3555 src/libxl/libxl_driver.c:3622 #: src/libxl/libxl_driver.c:3708 src/openvz/openvz_driver.c:570 #: src/openvz/openvz_driver.c:608 tools/virsh-domain.c:7054 #: tools/virsh-domain.c:7222 msgid "Domain is not running" msgstr "도메인이 실행중이 아님" #: src/lxc/lxc_driver.c:733 msgid "cgroups must be configured on the host" msgstr "" #: src/lxc/lxc_driver.c:745 msgid "Failed to set memory for domain" msgstr "도메인에 대한 메모리 설정 실패" #: src/lxc/lxc_driver.c:796 src/lxc/lxc_driver.c:1815 #: src/lxc/lxc_driver.c:1959 src/lxc/lxc_driver.c:2064 #: src/lxc/lxc_driver.c:2169 src/qemu/qemu_driver.c:6805 #: src/qemu/qemu_driver.c:6966 src/qemu/qemu_driver.c:7155 #: src/qemu/qemu_driver.c:7312 src/qemu/qemu_driver.c:7474 #: src/qemu/qemu_driver.c:7655 src/qemu/qemu_driver.c:7852 #: src/qemu/qemu_driver.c:8135 src/qemu/qemu_driver.c:13651 #, c-format msgid "cannot find cgroup for domain %s" msgstr "도메인 %s에 대한 cgroup을 찾을 수 없음" #: src/lxc/lxc_driver.c:808 src/qemu/qemu_driver.c:7219 #, fuzzy msgid "unable to set memory hard_limit tunable" msgstr "cpu shares tunable을 설정할 수 없음" #: src/lxc/lxc_driver.c:815 src/qemu/qemu_driver.c:7232 #, fuzzy msgid "unable to set memory soft_limit tunable" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/lxc/lxc_driver.c:822 src/qemu/qemu_driver.c:7245 #, fuzzy msgid "unable to set swap_hard_limit tunable" msgstr "cpu shares tunable을 설정할 수 없음" #: src/lxc/lxc_driver.c:886 src/qemu/qemu_driver.c:7373 #, fuzzy msgid "unable to get memory hard limit" msgstr "도메인에 대한 메모리 설정 실패" #: src/lxc/lxc_driver.c:897 src/qemu/qemu_driver.c:7386 #, fuzzy msgid "unable to get memory soft limit" msgstr "도메인에 대한 메모리 설정 실패" #: src/lxc/lxc_driver.c:908 src/qemu/qemu_driver.c:7184 #: src/qemu/qemu_driver.c:7399 #, fuzzy msgid "unable to get swap hard limit" msgstr "cpu shares tunable을 얻을 수 없음" #: src/lxc/lxc_driver.c:1003 src/libxl/libxl_driver.c:2719 #: src/vmware/vmware_driver.c:668 #, fuzzy msgid "Domain is already running" msgstr "도메인이 이미 실행중입니다" #: src/lxc/lxc_driver.c:1132 src/lxc/lxc_driver.c:2619 #: src/libxl/libxl_driver.c:2809 src/openvz/openvz_driver.c:1962 #: src/parallels/parallels_driver.c:68 src/parallels/parallels_driver.c:854 #: src/qemu/qemu_driver.c:1298 src/qemu/qemu_driver.c:1350 #: src/qemu/qemu_driver.c:1374 src/qemu/qemu_driver.c:1398 #: src/qemu/qemu_driver.c:1556 src/qemu/qemu_driver.c:1630 #: src/qemu/qemu_driver.c:1696 src/qemu/qemu_driver.c:1778 #: src/qemu/qemu_driver.c:1870 src/qemu/qemu_driver.c:1932 #: src/qemu/qemu_driver.c:2016 src/qemu/qemu_driver.c:2045 #: src/qemu/qemu_driver.c:2076 src/qemu/qemu_driver.c:2179 #: src/qemu/qemu_driver.c:2256 src/qemu/qemu_driver.c:2302 #: src/qemu/qemu_driver.c:2391 src/qemu/qemu_driver.c:2424 #: src/qemu/qemu_driver.c:2928 src/qemu/qemu_driver.c:2987 #: src/qemu/qemu_driver.c:3060 src/qemu/qemu_driver.c:3089 #: src/qemu/qemu_driver.c:3250 src/qemu/qemu_driver.c:3615 #: src/qemu/qemu_driver.c:3729 src/qemu/qemu_driver.c:3918 #: src/qemu/qemu_driver.c:4008 src/qemu/qemu_driver.c:4167 #: src/qemu/qemu_driver.c:4236 src/qemu/qemu_driver.c:4327 #: src/qemu/qemu_driver.c:4368 src/qemu/qemu_driver.c:4426 #: src/qemu/qemu_driver.c:5036 src/qemu/qemu_driver.c:5370 #: src/qemu/qemu_driver.c:5624 src/qemu/qemu_driver.c:6308 #: src/qemu/qemu_driver.c:6484 src/qemu/qemu_driver.c:6511 #: src/qemu/qemu_driver.c:8338 src/qemu/qemu_driver.c:8423 #: src/qemu/qemu_driver.c:8592 src/qemu/qemu_driver.c:8950 #: src/qemu/qemu_driver.c:9011 src/qemu/qemu_driver.c:9079 #: src/qemu/qemu_driver.c:9176 src/qemu/qemu_driver.c:9539 #: src/qemu/qemu_driver.c:9629 src/qemu/qemu_driver.c:9816 #: src/qemu/qemu_driver.c:9887 src/qemu/qemu_driver.c:10131 #: src/qemu/qemu_driver.c:10181 src/qemu/qemu_driver.c:10243 #: src/qemu/qemu_driver.c:10299 src/qemu/qemu_driver.c:10356 #: src/qemu/qemu_driver.c:11089 src/qemu/qemu_driver.c:11331 #: src/qemu/qemu_driver.c:11361 src/qemu/qemu_driver.c:11391 #: src/qemu/qemu_driver.c:11424 src/qemu/qemu_driver.c:11464 #: src/qemu/qemu_driver.c:11504 src/qemu/qemu_driver.c:11543 #: src/qemu/qemu_driver.c:11578 src/qemu/qemu_driver.c:11608 #: src/qemu/qemu_driver.c:11651 src/qemu/qemu_driver.c:11686 #: src/qemu/qemu_driver.c:11724 src/qemu/qemu_driver.c:11764 #: src/qemu/qemu_driver.c:11837 src/qemu/qemu_driver.c:12205 #: src/qemu/qemu_driver.c:12316 src/qemu/qemu_driver.c:12469 #: src/qemu/qemu_driver.c:12589 src/qemu/qemu_driver.c:12764 #: src/qemu/qemu_driver.c:12859 src/qemu/qemu_driver.c:13014 #: src/qemu/qemu_driver.c:13145 src/qemu/qemu_driver.c:13230 #: src/qemu/qemu_driver.c:13330 src/qemu/qemu_driver.c:13704 #: src/qemu/qemu_driver.c:13780 src/qemu/qemu_driver.c:13855 #: src/test/test_driver.c:2131 src/uml/uml_driver.c:1666 #: src/uml/uml_driver.c:1691 src/uml/uml_driver.c:1724 #: src/uml/uml_driver.c:2067 src/uml/uml_driver.c:2185 #: src/uml/uml_driver.c:2418 src/vmware/vmware_driver.c:705 #, c-format msgid "no domain with matching uuid '%s'" msgstr "uuid가 '%s'와 일치하는 도메인이 없음" #: src/lxc/lxc_driver.c:1138 src/qemu/qemu_driver.c:3638 #: src/qemu/qemu_driver.c:4374 src/qemu/qemu_driver.c:4432 #, c-format msgid "unknown virt type in domain definition '%d'" msgstr "도메인 정의 '%d'에 알려져 있지 않은 virt 유형" #: src/lxc/lxc_driver.c:1161 src/qemu/qemu_driver.c:4397 #: src/qemu/qemu_driver.c:4467 msgid "Failed to get security label" msgstr "보안 레이블을 얻는 데 실패" #: src/lxc/lxc_driver.c:1192 src/qemu/qemu_driver.c:4501 #, c-format msgid "security model string exceeds max %d bytes" msgstr "보안 모델 문자열이 최대 %d 바이트를 넘어갑니다" #: src/lxc/lxc_driver.c:1201 src/qemu/qemu_driver.c:4511 #, c-format msgid "security DOI string exceeds max %d bytes" msgstr "보안 DOI 문자열이 최대 %d 바이트를 넘어갑니다" #: src/lxc/lxc_driver.c:1394 src/qemu/qemu_driver.c:310 #, fuzzy msgid "Failed to initialize security drivers" msgstr "보안 드라이버 시작 실패" #: src/lxc/lxc_driver.c:1594 #, c-format msgid "Unknown release: %s" msgstr "알려지지 않은 릴리즈: %s" #: src/lxc/lxc_driver.c:1663 src/lxc/lxc_driver.c:1810 #: src/lxc/lxc_driver.c:1953 src/qemu/qemu_driver.c:6609 #: src/qemu/qemu_driver.c:7847 src/qemu/qemu_driver.c:8129 #, fuzzy msgid "cgroup CPU controller is not mounted" msgstr "디스크 컨트롤러 %s:%d를 찾을 수 없음" #: src/lxc/lxc_driver.c:1696 src/qemu/qemu_driver.c:7975 #, fuzzy msgid "unable to get cpu bandwidth period tunable" msgstr "cpu shares tunable을 얻을 수 없음" #: src/lxc/lxc_driver.c:1703 src/qemu/qemu_driver.c:7982 #, fuzzy msgid "unable to get cpu bandwidth tunable" msgstr "cpu shares tunable을 얻을 수 없음" #: src/lxc/lxc_driver.c:1725 src/qemu/qemu_cgroup.c:460 #, fuzzy msgid "Unable to get cpu bandwidth period" msgstr "현재 시간을 얻을 수 없음" #: src/lxc/lxc_driver.c:1732 src/qemu/qemu_cgroup.c:467 #, fuzzy msgid "Unable to set cpu bandwidth period" msgstr "현재 시간을 얻을 수 없음" #: src/lxc/lxc_driver.c:1741 src/qemu/qemu_cgroup.c:476 #, fuzzy msgid "Unable to set cpu bandwidth quota" msgstr "cpu shares tunable을 설정할 수 없음" #: src/lxc/lxc_driver.c:1753 src/qemu/qemu_cgroup.c:488 #, fuzzy msgid "Unable to rollback cpu bandwidth period" msgstr "현재 시간을 얻을 수 없음" #: src/lxc/lxc_driver.c:1792 src/lxc/lxc_driver.c:1934 #: src/lxc/lxc_driver.c:2047 src/lxc/lxc_driver.c:2145 #: src/qemu/qemu_driver.c:6788 src/qemu/qemu_driver.c:6942 #: src/qemu/qemu_driver.c:7138 src/qemu/qemu_driver.c:7295 #: src/qemu/qemu_driver.c:7457 src/qemu/qemu_driver.c:7632 #: src/qemu/qemu_driver.c:7829 src/qemu/qemu_driver.c:8108 #: src/qemu/qemu_driver.c:8673 src/qemu/qemu_driver.c:8836 #: src/qemu/qemu_driver.c:13632 #, c-format msgid "No such domain %s" msgstr "도메인 %s는 없음" #: src/lxc/lxc_driver.c:1829 src/qemu/qemu_driver.c:7866 msgid "unable to set cpu shares tunable" msgstr "cpu shares tunable을 설정할 수 없음" #: src/lxc/lxc_driver.c:1966 src/qemu/qemu_driver.c:8142 msgid "unable to get cpu shares tunable" msgstr "cpu shares tunable을 얻을 수 없음" #: src/lxc/lxc_driver.c:2058 src/lxc/lxc_driver.c:2163 #: src/qemu/qemu_driver.c:6799 src/qemu/qemu_driver.c:6960 msgid "blkio cgroup isn't mounted" msgstr "" #: src/lxc/lxc_driver.c:2076 src/lxc/lxc_driver.c:2099 #: src/qemu/qemu_driver.c:6820 src/qemu/qemu_driver.c:6876 msgid "out of blkio weight range." msgstr "" #: src/lxc/lxc_driver.c:2083 src/qemu/qemu_driver.c:6828 #, fuzzy msgid "unable to set blkio weight tunable" msgstr "cpu shares tunable을 설정할 수 없음" #: src/lxc/lxc_driver.c:2182 src/qemu/qemu_driver.c:6981 #, fuzzy msgid "unable to get blkio weight" msgstr "cpu shares tunable을 얻을 수 없음" #: src/lxc/lxc_driver.c:2270 #, c-format msgid "Invalid path, '%s' is not a known interface" msgstr "잘못된 경로. '%s'는 알려진 인터페이스가 아닙니다." #: src/lxc/lxc_driver.c:2335 msgid "Cannot set autostart for transient domain" msgstr "임시 도메인의 autostart를 설정할 수 없음" #: src/lxc/lxc_driver.c:2358 #, c-format msgid "Cannot create autostart directory %s" msgstr "autostart 디렉터리 %s를 생성할 수 없음" #: src/lxc/lxc_driver.c:2365 src/libxl/libxl_driver.c:3510 #: src/qemu/qemu_driver.c:6539 src/uml/uml_driver.c:2304 #, c-format msgid "Failed to create symlink '%s to '%s'" msgstr "심볼릭 링크 '%s'를 '%s'에 대해 생성하는 데 실패" #: src/lxc/lxc_driver.c:2372 src/libxl/libxl_driver.c:3517 #: src/network/bridge_driver.c:2768 src/qemu/qemu_driver.c:6546 #: src/storage/storage_driver.c:1064 src/uml/uml_driver.c:2311 #, c-format msgid "Failed to delete symlink '%s'" msgstr "심볼릭 링크 '%s' 삭제 실패" #: src/lxc/lxc_driver.c:2510 msgid "Suspend operation failed" msgstr "일시정지 동작이 실패했습니다" #: src/lxc/lxc_driver.c:2575 msgid "Resume operation failed" msgstr "재개 동작이 실패했습니다" #: src/lxc/lxc_driver.c:2646 src/uml/uml_driver.c:2445 #, fuzzy, c-format msgid "cannot find console device '%s'" msgstr "장치 '%s'을(를) 닫을 수 없음" #: src/lxc/lxc_driver.c:2647 src/uml/uml_driver.c:2446 msgid "default" msgstr "" #: src/lxc/lxc_driver.c:2653 src/qemu/qemu_driver.c:12511 #: src/uml/uml_driver.c:2452 src/xen/xen_driver.c:2169 #, fuzzy, c-format msgid "character device %s is not using a PTY" msgstr "문자 장치 정보가 배열이 아닙니다" #: src/lxc/lxc_monitor.c:120 src/qemu/qemu_agent.c:739 #: src/qemu/qemu_monitor.c:700 msgid "cannot initialize monitor mutex" msgstr "모니터 뮤텍스를 초기화할 수 없음" #: src/lxc/lxc_process.c:340 src/network/bridge_driver.c:1888 #: src/qemu/qemu_command.c:282 src/qemu/qemu_driver.c:8767 #: src/util/virnetdevmacvlan.c:930 #, fuzzy, c-format msgid "cannot set bandwidth limits on %s" msgstr "모니터 명령 '%s'를 보낼 수 없음" #: src/lxc/lxc_process.c:376 #, fuzzy msgid "Unable to set network bandwidth on direct interfaces" msgstr "cpu shares tunable을 설정할 수 없음" #: src/lxc/lxc_process.c:390 #, fuzzy msgid "Unable to set port profile on direct interfaces" msgstr "인터페이스에 대한 브리지 얻기 실패" #: src/lxc/lxc_process.c:468 src/qemu/qemu_command.c:210 #, c-format msgid "Network '%s' is not active." msgstr "네트워크 '%s'가 동작중이 아닙니다" #: src/lxc/lxc_process.c:504 #, fuzzy msgid "No bridge name specified" msgstr "커널이 지정되지 않았습니다" #: src/lxc/lxc_process.c:533 #, fuzzy, c-format msgid "Unsupported network type %s" msgstr "지원되지 않는 네트워크 유형 %d" #: src/lxc/lxc_process.c:701 #, c-format msgid "Invalid PID %d for container" msgstr "컨테이너에 대해 잘못된 PID %d" #: src/lxc/lxc_process.c:720 #, fuzzy msgid "Failed to kill container PIDs" msgstr "복제 컨테이너를 실행하는 데 실패" #: src/lxc/lxc_process.c:726 msgid "Some container PIDs refused to die" msgstr "" #: src/lxc/lxc_process.c:836 #, fuzzy, c-format msgid "failed to open logfile %s" msgstr "파일 열기 실패" #: src/lxc/lxc_process.c:852 src/qemu/qemu_domain.c:1511 #, fuzzy, c-format msgid "unable to seek to end of log for %s" msgstr "파일에서 읽거나 lseek하는 데 실패했습니다: %s" #: src/lxc/lxc_process.c:856 src/qemu/qemu_domain.c:1515 #, fuzzy, c-format msgid "unable to seek to %lld from start for %s" msgstr "위치 %lld로 %s에서 이동할 수 없음" #: src/lxc/lxc_process.c:873 #, fuzzy msgid "Failure while reading guest log output" msgstr "%s 로그 출력을 읽는 데 실패" #: src/lxc/lxc_process.c:931 msgid "The 'cpuacct', 'devices' & 'memory' cgroups controllers must be mounted" msgstr "" #: src/lxc/lxc_process.c:938 #, fuzzy msgid "Unable to find 'cpuacct' cgroups controller mount" msgstr "%s에 대한 cgroup을 찾을 수 없음\n" #: src/lxc/lxc_process.c:944 #, fuzzy msgid "Unable to find 'devices' cgroups controller mount" msgstr "%s에 대한 cgroup을 찾을 수 없음\n" #: src/lxc/lxc_process.c:950 #, fuzzy msgid "Unable to find 'memory' cgroups controller mount" msgstr "%s에 대한 cgroup을 찾을 수 없음\n" #: src/lxc/lxc_process.c:956 #, c-format msgid "Cannot create log directory '%s'" msgstr "로그 디렉터리 '%s'를 생성할 수 없음" #: src/lxc/lxc_process.c:1027 #, fuzzy msgid "Only PTY console types are supported" msgstr "오직 1 %s 컨트롤러만이 지원됩니다" #: src/lxc/lxc_process.c:1057 #, c-format msgid "Failed to open '%s'" msgstr "'%s' 열기 실패" #: src/lxc/lxc_process.c:1116 #, fuzzy msgid "could not close handshake fd" msgstr "파일 '%s'를 닫을 수 없음" #: src/lxc/lxc_process.c:1129 #, c-format msgid "Failed to read pid file %s/%s.pid" msgstr "pid 파일 %s/%s.pid 읽기 실패" #: src/lxc/lxc_process.c:1145 #, fuzzy, c-format msgid "guest failed to start: %s" msgstr "%s가 %s 생성 실패" #: src/lxc/lxc_process.c:1191 #, fuzzy msgid "could not close logfile" msgstr "파일 '%s'를 닫을 수 없음" #: src/lxc/lxc_process.c:1258 src/libxl/libxl_driver.c:153 #: src/qemu/qemu_driver.c:211 src/uml/uml_driver.c:196 #, c-format msgid "Failed to autostart VM '%s': %s" msgstr "VM '%s'의 autostart 실패: %s" #: src/libxl/libxl_driver.c:155 src/qemu/qemu_driver.c:205 #: src/qemu/qemu_driver.c:213 src/qemu/qemu_hostdev.c:774 #: src/qemu/qemu_hostdev.c:793 src/qemu/qemu_hostdev.c:842 #: src/secret/secret_driver.c:505 src/uml/uml_driver.c:197 #: src/xenapi/xenapi_utils.c:265 tools/virsh.c:217 #: tools/virsh-domain-monitor.c:56 msgid "unknown error" msgstr "알려지지 않은 오류" #: src/libxl/libxl_driver.c:171 src/libxl/libxl_driver.c:3392 msgid "libxl_get_physinfo_info failed" msgstr "" #: src/libxl/libxl_driver.c:177 src/libxl/libxl_driver.c:3398 msgid "libxl_get_version_info failed" msgstr "" #: src/libxl/libxl_driver.c:187 #, fuzzy, c-format msgid "machine type %s too big for destination" msgstr "드라이버 유형 %s가 목적지에 대해 너무 큼" #: src/libxl/libxl_driver.c:227 msgid "cannot read domain image" msgstr "도메인 이미지를 읽을 수 없음" #: src/libxl/libxl_driver.c:233 #, fuzzy msgid "failed to read libxl header" msgstr "qemu 헤더를 읽는 것을 실패" #: src/libxl/libxl_driver.c:238 src/qemu/qemu_driver.c:4576 msgid "image magic is incorrect" msgstr "이미지 매직이 잘못되었습니다" #: src/libxl/libxl_driver.c:244 src/qemu/qemu_driver.c:4602 #, c-format msgid "image version is not supported (%d > %d)" msgstr "이미지가 지원하지 않는 버전입니다(%d > %d)" #: src/libxl/libxl_driver.c:251 src/qemu/qemu_driver.c:4609 #, c-format msgid "invalid XML length: %d" msgstr "잘못된 이미지 길이: %d" #: src/libxl/libxl_driver.c:261 src/qemu/qemu_driver.c:4620 msgid "failed to read XML" msgstr "XML을 읽는 것을 실패" #: src/libxl/libxl_driver.c:365 #, fuzzy, c-format msgid "Unable to cleanup domain %d" msgstr "도메인 %s에 대한 cgroup을 생성할 수 없음" #: src/libxl/libxl_driver.c:544 src/libxl/libxl_driver.c:2453 #, fuzzy, c-format msgid "Failed to pin vcpu '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_driver.c:642 src/qemu/qemu_driver.c:4994 #, c-format msgid "" "cannot restore domain '%s' uuid %s from a file which belongs to domain '%s' " "uuid %s" msgstr "" #: src/libxl/libxl_driver.c:667 #, fuzzy, c-format msgid "libxenlight failed to get free memory for domain '%s'" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/libxl/libxl_driver.c:683 #, fuzzy, c-format msgid "libxenlight failed to create new domain '%s'" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/libxl/libxl_driver.c:687 #, fuzzy, c-format msgid "libxenlight failed to restore domain '%s'" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/libxl/libxl_driver.c:699 msgid "libxenlight failed to store userdata" msgstr "" #: src/libxl/libxl_driver.c:903 #, fuzzy, c-format msgid "Failed to create log dir '%s': %s" msgstr "lib 디렉터리 '%s'를 생성하는 데 실패: %s" #: src/libxl/libxl_driver.c:908 src/qemu/qemu_driver.c:639 #, c-format msgid "Failed to create state dir '%s': %s" msgstr "상태 디렉터리 '%s'를 생성하는 데 실패: %s" #: src/libxl/libxl_driver.c:913 src/qemu/qemu_driver.c:644 #, c-format msgid "Failed to create lib dir '%s': %s" msgstr "lib 디렉터리 '%s'를 생성하는 데 실패: %s" #: src/libxl/libxl_driver.c:918 src/qemu/qemu_driver.c:654 #: src/qemu/qemu_driver.c:659 #, fuzzy, c-format msgid "Failed to create save dir '%s': %s" msgstr "상태 디렉터리 '%s'를 생성하는 데 실패: %s" #: src/libxl/libxl_driver.c:929 src/qemu/qemu_domain.c:1456 #: src/uml/uml_driver.c:1043 #, c-format msgid "failed to create logfile %s" msgstr "로그파일 %s를 생성하는 데 실패" #: src/libxl/libxl_driver.c:962 #, fuzzy msgid "cannot create capabilities for libxenlight" msgstr "호스트 CPU 기능을 얻는 데 실패했습니다" #: src/libxl/libxl_driver.c:1067 #, fuzzy msgid "libxenlight state driver is not active" msgstr "lxc 상태 드라이버가 작동중이 아닙니다" #: src/libxl/libxl_driver.c:1077 src/xen/xen_driver.c:296 #, c-format msgid "unexpected Xen URI path '%s', try xen:///" msgstr "예기치 못한 Xen URI 경로 '%s', xen:/// 을 시도해 보십시오" #: src/libxl/libxl_driver.c:1325 #, fuzzy, c-format msgid "Failed to suspend domain '%d' with libxenlight" msgstr "도메인 %s를 종료하기 실패" #: src/libxl/libxl_driver.c:1384 #, fuzzy, c-format msgid "Failed to resume domain '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_driver.c:1441 #, fuzzy, c-format msgid "Failed to shutdown domain '%d' with libxenlight" msgstr "도메인 %s를 종료하기 실패" #: src/libxl/libxl_driver.c:1494 #, fuzzy, c-format msgid "Failed to reboot domain '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_driver.c:1539 src/libxl/libxl_driver.c:1876 #: src/libxl/libxl_driver.c:2053 #, fuzzy, c-format msgid "Failed to destroy domain '%d'" msgstr "%s 도메인 강제 종료 실패 " #: src/libxl/libxl_driver.c:1604 src/libxl/libxl_driver.c:1635 #: src/libxl/libxl_driver.c:1755 src/libxl/libxl_driver.c:1802 #: src/libxl/libxl_driver.c:2261 src/libxl/libxl_driver.c:2380 #: src/libxl/libxl_driver.c:2437 src/libxl/libxl_driver.c:2504 #: src/libxl/libxl_driver.c:2568 src/libxl/libxl_driver.c:3249 #: src/libxl/libxl_driver.c:3550 src/libxl/libxl_driver.c:3617 #: src/libxl/libxl_driver.c:3703 src/openvz/openvz_driver.c:251 #: src/openvz/openvz_driver.c:398 src/openvz/openvz_driver.c:446 #: src/openvz/openvz_driver.c:520 src/openvz/openvz_driver.c:564 #: src/openvz/openvz_driver.c:602 src/openvz/openvz_driver.c:645 #: src/openvz/openvz_driver.c:696 src/openvz/openvz_driver.c:1187 #: src/openvz/openvz_driver.c:1236 src/openvz/openvz_driver.c:1266 #: src/openvz/openvz_driver.c:1361 src/openvz/openvz_driver.c:2061 #: src/uml/uml_driver.c:1636 src/uml/uml_driver.c:1761 #: src/uml/uml_driver.c:1807 src/uml/uml_driver.c:1836 #: src/uml/uml_driver.c:1888 src/uml/uml_driver.c:1967 #: src/uml/uml_driver.c:2250 src/uml/uml_driver.c:2276 #: src/uml/uml_driver.c:2351 src/vbox/vbox_tmpl.c:2072 #: src/vbox/vbox_tmpl.c:2132 src/vbox/vbox_tmpl.c:5302 #: src/vbox/vbox_tmpl.c:5399 src/vbox/vbox_tmpl.c:5636 #: src/vbox/vbox_tmpl.c:8765 src/vbox/vbox_tmpl.c:9130 #: src/vmware/vmware_driver.c:389 src/vmware/vmware_driver.c:449 #: src/vmware/vmware_driver.c:498 src/vmware/vmware_driver.c:542 #: src/vmware/vmware_driver.c:905 src/vmware/vmware_driver.c:1032 #: src/vmware/vmware_driver.c:1070 msgid "no domain with matching uuid" msgstr "uuid가 일치하는 도메인 없음" #: src/libxl/libxl_driver.c:1656 #, fuzzy msgid "cannot set memory on an inactive domain" msgstr "동작중인 도메인의 메모리를 설정할 수 없음" #: src/libxl/libxl_driver.c:1677 #, fuzzy, c-format msgid "Failed to set maximum memory for domain '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_driver.c:1698 src/qemu/qemu_driver.c:2112 #: src/uml/uml_driver.c:1736 msgid "cannot set memory higher than max memory" msgstr "최대 메모리보다 더 높게 메모리를 설정할 수 없음" #: src/libxl/libxl_driver.c:1707 #, fuzzy, c-format msgid "Failed to set memory for domain '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_driver.c:1766 #, fuzzy, c-format msgid "libxl_domain_info failed for domain '%d'" msgstr "도메인 %d에 대한 cputime을 읽을 수 없음" #: src/libxl/libxl_driver.c:1831 #, c-format msgid "Domain '%d' has to be running because libxenlight will suspend it" msgstr "" #: src/libxl/libxl_driver.c:1839 #, c-format msgid "Failed to create domain save file '%s'" msgstr "도메인 저장 파일 '%s'를 만드는 데 실패" #: src/libxl/libxl_driver.c:1854 #, fuzzy msgid "Failed to write save file header" msgstr "'%s' 파일 읽기 실패" #: src/libxl/libxl_driver.c:1860 #, fuzzy msgid "Failed to write xml description" msgstr "도메인 설명 구문 분석 실패" #: src/libxl/libxl_driver.c:1866 #, fuzzy, c-format msgid "Failed to save domain '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_driver.c:1892 src/libxl/libxl_driver.c:1984 #, fuzzy msgid "cannot close file" msgstr "파일 '%s'를 닫을 수 없음" #: src/libxl/libxl_driver.c:1909 src/libxl/libxl_driver.c:1958 #: src/test/test_driver.c:1759 src/test/test_driver.c:1872 #: src/xen/xen_driver.c:1065 src/xen/xen_driver.c:1089 msgid "xml modification unsupported" msgstr "" #: src/libxl/libxl_driver.c:2033 #, fuzzy, c-format msgid "Before dumping core, failed to suspend domain '%d' with libxenlight" msgstr "도메인 %s를 종료하기 실패" #: src/libxl/libxl_driver.c:2044 #, fuzzy, c-format msgid "Failed to dump core of domain '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_driver.c:2074 #, fuzzy, c-format msgid "After dumping core, failed to resume domain '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_driver.c:2118 src/qemu/qemu_driver.c:2998 #, fuzzy msgid "cannot do managed save for transient domain" msgstr "임시 도메인에 대해 autostart를 설정할 수 없음" #: src/libxl/libxl_driver.c:2247 src/libxl/libxl_driver.c:2394 #: src/test/test_driver.c:2175 src/xen/xen_driver.c:1131 #, fuzzy, c-format msgid "invalid flag combination: (0x%x)" msgstr "%s에 있는 잘못된 인수" #: src/libxl/libxl_driver.c:2252 msgid "nvcpus is zero" msgstr "" #: src/libxl/libxl_driver.c:2267 #, fuzzy msgid "cannot set vcpus on an inactive domain" msgstr "실행중이 아닌 도메인의 vcpu 목록을 얻을 수 없음" #: src/libxl/libxl_driver.c:2279 src/qemu/qemu_driver.c:3645 #: src/xen/xend_internal.c:2222 src/xen/xm_internal.c:727 msgid "could not determine max vcpus for the domain" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: src/libxl/libxl_driver.c:2289 src/qemu/qemu_driver.c:3655 #: src/xen/xend_internal.c:2227 src/xen/xm_internal.c:736 #, c-format msgid "" "requested vcpus is greater than max allowable vcpus for the domain: %d > %d" msgstr "요청된 vcpu가 도메인에서 허용할 수 있는 최대 갯수보다 큽니다: %d > %d" #: src/libxl/libxl_driver.c:2327 src/libxl/libxl_driver.c:2336 #, fuzzy, c-format msgid "Failed to set vcpus for domain '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_driver.c:2408 #, fuzzy msgid "domain is transient" msgstr "도메인이 실행중이 아닙니다" #: src/libxl/libxl_driver.c:2443 src/test/test_driver.c:2364 msgid "cannot pin vcpus on an inactive domain" msgstr "비활성화된 도메인의 vcpu를 고정할 수 없음" #: src/libxl/libxl_driver.c:2470 #, fuzzy msgid "failed to update or add vcpupin xml" msgstr "도메인 xml을 얻는 데 실패" #: src/libxl/libxl_driver.c:2517 #, fuzzy, c-format msgid "Failed to list vcpus for domain '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_driver.c:2595 src/libxl/libxl_driver.c:2638 #: src/qemu/qemu_driver.c:5099 src/qemu/qemu_driver.c:5143 #: src/xen/xen_driver.c:1288 src/xen/xen_driver.c:1337 #, c-format msgid "unsupported config type %s" msgstr "지원하지 않는 설정 유형 %s" #: src/libxl/libxl_driver.c:2600 src/libxl/libxl_driver.c:2643 #, fuzzy msgid "cannot get version information from libxenlight" msgstr "디스크 정보 보기 실패" #: src/libxl/libxl_driver.c:2608 #, fuzzy msgid "parsing xm config failed" msgstr "풀의 설정 파일이 없습니다" #: src/libxl/libxl_driver.c:2815 src/qemu/qemu_driver.c:5630 #: src/uml/uml_driver.c:1973 src/vmware/vmware_driver.c:711 msgid "cannot undefine transient domain" msgstr "임시 도메인 정의를 해제할 수 없음" #: src/libxl/libxl_driver.c:2827 src/qemu/qemu_driver.c:5655 #, fuzzy msgid "Failed to remove domain managed save image" msgstr "도메인 저장 파일 '%s'를 만드는 데 실패" #: src/libxl/libxl_driver.c:2832 src/qemu/qemu_driver.c:5661 #: tools/virsh-domain.c:2599 #, fuzzy msgid "Refusing to undefine while domain managed save image exists" msgstr "도메인 저장 파일 '%s'를 만드는 데 실패" #: src/libxl/libxl_driver.c:2890 src/qemu/qemu_hotplug.c:71 #, c-format msgid "No device with bus '%s' and target '%s'" msgstr "버스 '%s'와 타겟 '%s'를 가지는 장치가 없음" #: src/libxl/libxl_driver.c:2897 src/qemu/qemu_hotplug.c:86 #, c-format msgid "Removable media not supported for %s device" msgstr "%s 장치에 대해 이동식 미디어가 지원되지 않음" #: src/libxl/libxl_driver.c:2907 #, fuzzy, c-format msgid "libxenlight failed to change media for disk '%s'" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/libxl/libxl_driver.c:2942 src/qemu/qemu_hotplug.c:215 #: src/qemu/qemu_hotplug.c:441 src/qemu/qemu_hotplug.c:564 #: src/uml/uml_driver.c:2013 #, c-format msgid "target %s already exists" msgstr "타겟 %s가 이미 존재합니다" #: src/libxl/libxl_driver.c:2948 src/qemu/qemu_hotplug.c:582 #: src/uml/uml_driver.c:2020 msgid "disk source path is missing" msgstr "디스크 원본 경로가 빠졌습니다" #: src/libxl/libxl_driver.c:2963 #, fuzzy, c-format msgid "libxenlight failed to attach disk '%s'" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/libxl/libxl_driver.c:2972 src/qemu/qemu_driver.c:5753 #: src/uml/uml_driver.c:2090 #, c-format msgid "disk bus '%s' cannot be hotplugged." msgstr "디스크 버스 '%s'가 핫플러그될 수 없습니다" #: src/libxl/libxl_driver.c:2978 src/qemu/qemu_driver.c:5759 #, c-format msgid "disk device type '%s' cannot be hotplugged" msgstr "디스크 장치 타입 '%s'가 핫플러그 될 수 없습니다" #: src/libxl/libxl_driver.c:3005 src/qemu/qemu_hotplug.c:1656 #: src/qemu/qemu_hotplug.c:1760 src/uml/uml_driver.c:2144 #, c-format msgid "disk %s not found" msgstr "디스크 %s를 찾을 수 없음" #: src/libxl/libxl_driver.c:3017 #, fuzzy, c-format msgid "libxenlight failed to detach disk '%s'" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/libxl/libxl_driver.c:3027 #, fuzzy, c-format msgid "disk bus '%s' cannot be hot unplugged." msgstr "디스크 버스 '%s'가 핫플러그될 수 없습니다" #: src/libxl/libxl_driver.c:3033 #, fuzzy, c-format msgid "device type '%s' cannot hot unplugged" msgstr "디스크 장치 타입 '%s'가 핫플러그 될 수 없습니다" #: src/libxl/libxl_driver.c:3057 src/qemu/qemu_driver.c:5849 #: src/uml/uml_driver.c:2095 #, c-format msgid "device type '%s' cannot be attached" msgstr "장치 유형 '%s'가 부착될 수 없습니다" #: src/libxl/libxl_driver.c:3075 src/qemu/qemu_driver.c:6031 #, fuzzy, c-format msgid "target %s already exists." msgstr "타겟 %s가 이미 존재합니다" #: src/libxl/libxl_driver.c:3088 src/qemu/qemu_driver.c:6116 #, fuzzy msgid "persistent attach of device is not supported" msgstr "cpu 친밀도(affinity)가 지원되지 않습니다" #: src/libxl/libxl_driver.c:3107 src/xen/xm_internal.c:1547 #, fuzzy, c-format msgid "device type '%s' cannot be detached" msgstr "장치 유형 '%s'가 부착될 수 없습니다" #: src/libxl/libxl_driver.c:3126 src/qemu/qemu_driver.c:6139 #, fuzzy, c-format msgid "no target device %s" msgstr "장치 %s을(를) 구문 분석할 수 없음 " #: src/libxl/libxl_driver.c:3134 src/qemu/qemu_driver.c:6196 #, fuzzy msgid "persistent detach of device is not supported" msgstr "cpu 친밀도(affinity)가 지원되지 않습니다" #: src/libxl/libxl_driver.c:3159 src/qemu/qemu_driver.c:5971 #, fuzzy, c-format msgid "disk bus '%s' cannot be updated." msgstr "디스크 버스 '%s'가 핫플러그될 수 없습니다" #: src/libxl/libxl_driver.c:3166 src/qemu/qemu_driver.c:6008 #, fuzzy, c-format msgid "device type '%s' cannot be updated" msgstr "디스크 장치 타입 '%s'가 핫플러그 될 수 없습니다" #: src/libxl/libxl_driver.c:3187 src/openvz/openvz_driver.c:2008 #: src/qemu/qemu_driver.c:6216 #, fuzzy, c-format msgid "target %s doesn't exist." msgstr "'%s' 명령이 존재하지 않음" #: src/libxl/libxl_driver.c:3193 src/qemu/qemu_driver.c:6223 #, fuzzy msgid "this disk doesn't support update" msgstr "ps2 버스는 %s 입력 장치를 지원하지 않음 " #: src/libxl/libxl_driver.c:3214 src/qemu/qemu_driver.c:6269 #, fuzzy msgid "persistent update of device is not supported" msgstr "cpu 친밀도(affinity)가 지원되지 않습니다" #: src/libxl/libxl_driver.c:3269 src/qemu/qemu_driver.c:6332 #, fuzzy msgid "cannot modify device on transient domain" msgstr "임시 도메인 정의를 해제할 수 없음" #: src/libxl/libxl_driver.c:3295 src/libxl/libxl_driver.c:3319 #: src/qemu/qemu_driver.c:6372 src/qemu/qemu_driver.c:6396 #, fuzzy, c-format msgid "unknown domain modify action %d" msgstr "알려지지 않은 생명주기 동작 %s" #: src/libxl/libxl_driver.c:3488 src/qemu/qemu_driver.c:6517 #: src/uml/uml_driver.c:2282 msgid "cannot set autostart for transient domain" msgstr "임시 도메인에 대해 autostart를 설정할 수 없음" #: src/libxl/libxl_driver.c:3503 src/qemu/qemu_driver.c:6532 #: src/storage/storage_driver.c:1049 src/uml/uml_driver.c:2297 #, c-format msgid "cannot create autostart directory %s" msgstr "autostart 디렉터리 %s를 생성할 수 없음" #: src/libxl/libxl_driver.c:3562 src/libxl/libxl_driver.c:3630 #: src/libxl/libxl_driver.c:3716 #, fuzzy, c-format msgid "Failed to get scheduler id for domain '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_driver.c:3637 src/libxl/libxl_driver.c:3723 #, fuzzy msgid "Only 'credit' scheduler is supported" msgstr "오직 1 %s 컨트롤러만이 지원됩니다" #: src/libxl/libxl_driver.c:3643 src/libxl/libxl_driver.c:3729 #, fuzzy, c-format msgid "Failed to get scheduler parameters for domain '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_driver.c:3746 #, fuzzy, c-format msgid "Failed to set scheduler parameters for domain '%d' with libxenlight" msgstr "도메인 %s를 재부팅하기 실패" #: src/libxl/libxl_conf.c:376 #, fuzzy, c-format msgid "libxenlight failed to parse UUID '%s'" msgstr "모드 '%s'의 구문분석에 실패했습니다" #: src/libxl/libxl_conf.c:401 msgid "This version of libxenlight only supports 32 vcpus per domain" msgstr "" #: src/libxl/libxl_conf.c:536 #, fuzzy, c-format msgid "libxenlight does not support disk driver %s" msgstr "xen 버스는 %s 입력 장치를 지원하지 않음 " #: src/libxl/libxl_conf.c:552 #, fuzzy msgid "libxenlight does not support transient disks" msgstr "xen 버스는 %s 입력 장치를 지원하지 않음 " #: src/libxl/libxl_conf.c:630 src/qemu/qemu_command.c:3055 #: src/xenxs/xen_sxpr.c:1923 #, fuzzy, c-format msgid "scripts are not supported on interfaces of type %s" msgstr "이더넷 인터페이스에 대해 스크립트 실행이 지원되지 않습니다" #: src/libxl/libxl_conf.c:701 msgid "Unable to find an unused VNC port" msgstr "사용되지 않은 VNC 포트를 찾을 수 없음" #: src/libxl/libxl_conf.c:783 src/xenxs/xen_sxpr.c:1692 msgid "unexpected chr device type" msgstr "예기치 못한 문자 장치 유형" #: src/libxl/libxl_conf.c:921 #, fuzzy msgid "Failed to get node physical info from libxenlight" msgstr "노드 정보 보기 실패" #: src/libxl/libxl_conf.c:927 #, fuzzy msgid "Failed to get version info from libxenlight" msgstr "디스크 정보 보기 실패" #: src/network/bridge_driver.c:782 src/network/bridge_driver.c:788 #: src/network/bridge_driver.c:800 src/network/bridge_driver.c:867 #: src/network/bridge_driver.c:873 #, c-format msgid "cannot create directory %s" msgstr "디렉터리 %s를 생성할 수 없음" #: src/network/bridge_driver.c:859 #, c-format msgid "Cannot find %s - Possibly the package isn't installed" msgstr "" #: src/network/bridge_driver.c:905 #, fuzzy, c-format msgid "bridge '%s' has an invalid prefix" msgstr "브리지 이름 '%s'가 이미 사용중." #: src/network/bridge_driver.c:941 #, fuzzy, c-format msgid "couldn't write radvd config file '%s'" msgstr "설정 파일 쓰기 실패: %s" #: src/network/bridge_driver.c:991 src/network/bridge_driver.c:1165 #, fuzzy, c-format msgid "Invalid prefix or netmask for '%s'" msgstr "잘못된 디스크 버스 유형 '%s'" #: src/network/bridge_driver.c:1003 #, c-format msgid "failed to add iptables rule to allow forwarding from '%s'" msgstr "'%s'로부터의 포워딩을 허용하기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1017 #, c-format msgid "failed to add iptables rule to allow forwarding to '%s'" msgstr "'%s'로의 포워딩을 허용하기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1053 #, fuzzy, c-format msgid "failed to add iptables rule to enable masquerading to %s" msgstr "'%s'로의 마스커레이딩을 허용하기 위한 iptables 규칙 추가 실패\n" #: src/network/bridge_driver.c:1054 #, fuzzy msgid "failed to add iptables rule to enable masquerading" msgstr "'%s'로의 마스커레이딩을 허용하기 위한 iptables 규칙 추가 실패\n" #: src/network/bridge_driver.c:1067 #, fuzzy, c-format msgid "failed to add iptables rule to enable UDP masquerading to %s" msgstr "'%s'로의 마스커레이딩을 허용하기 위한 iptables 규칙 추가 실패\n" #: src/network/bridge_driver.c:1068 #, fuzzy msgid "failed to add iptables rule to enable UDP masquerading" msgstr "'%s'로의 마스커레이딩을 허용하기 위한 iptables 규칙 추가 실패\n" #: src/network/bridge_driver.c:1081 #, fuzzy, c-format msgid "failed to add iptables rule to enable TCP masquerading to %s" msgstr "'%s'로의 마스커레이딩을 허용하기 위한 iptables 규칙 추가 실패\n" #: src/network/bridge_driver.c:1082 #, fuzzy msgid "failed to add iptables rule to enable TCP masquerading" msgstr "'%s'로의 마스커레이딩을 허용하기 위한 iptables 규칙 추가 실패\n" #: src/network/bridge_driver.c:1177 #, c-format msgid "failed to add iptables rule to allow routing from '%s'" msgstr "'%s'로부터의 라우팅을 허용하기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1189 #, c-format msgid "failed to add iptables rule to allow routing to '%s'" msgstr "'%s'로의 라우팅을 허용하기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1243 #, fuzzy, c-format msgid "failed to add ip6tables rule to block outbound traffic from '%s'" msgstr "'%s'로부터 외부로 나가는 통신을 막기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1251 #, fuzzy, c-format msgid "failed to add ip6tables rule to block inbound traffic to '%s'" msgstr "'%s'로 들어가는 통신을 막기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1260 #, fuzzy, c-format msgid "failed to add ip6tables rule to allow cross bridge traffic on '%s'" msgstr "'%s'상의 크로스 브리지 통신을 허용하기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1269 src/network/bridge_driver.c:1277 #, fuzzy, c-format msgid "failed to add ip6tables rule to allow DNS requests from '%s'" msgstr "'%s'로부터의 DNS 요청을 허용하기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1330 src/network/bridge_driver.c:1338 #, c-format msgid "failed to add iptables rule to allow DHCP requests from '%s'" msgstr "'%s'로부터의 DHCP 요청을 허용하기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1361 src/network/bridge_driver.c:1369 #, c-format msgid "failed to add iptables rule to allow DNS requests from '%s'" msgstr "'%s'로부터의 DNS 요청을 허용하기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1379 #, fuzzy, c-format msgid "failed to add iptables rule to allow TFTP requests from '%s'" msgstr "'%s'로부터의 DHCP 요청을 허용하기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1389 #, c-format msgid "failed to add iptables rule to block outbound traffic from '%s'" msgstr "'%s'로부터 외부로 나가는 통신을 막기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1397 #, c-format msgid "failed to add iptables rule to block inbound traffic to '%s'" msgstr "'%s'로 들어가는 통신을 막기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1406 #, c-format msgid "failed to add iptables rule to allow cross bridge traffic on '%s'" msgstr "'%s'상의 크로스 브리지 통신을 허용하기 위한 iptables 규칙 추가 실패" #: src/network/bridge_driver.c:1625 #, fuzzy, c-format msgid "cannot write to %s to disable IPv6 on bridge %s" msgstr "브리지 '%s'상의 mac 주소를 팔터링할 수 없음" #: src/network/bridge_driver.c:1647 src/network/bridge_driver.c:1663 #, c-format msgid "cannot disable %s" msgstr "%s를 비활성화 할 수 없음" #: src/network/bridge_driver.c:1756 #, fuzzy, c-format msgid "Network is already in use by interface %s" msgstr "네트워크가 이미 동작함" #: src/network/bridge_driver.c:1777 #, c-format msgid "bridge '%s' has an invalid netmask or IP address" msgstr "" #: src/network/bridge_driver.c:1873 msgid "failed to enable IP forwarding" msgstr "IP 포워딩을 활성화하는 데 실패" #: src/network/bridge_driver.c:2022 msgid "network is already active" msgstr "네트워크가 이미 동작함" #: src/network/bridge_driver.c:2126 src/network/bridge_driver.c:2498 #: src/network/bridge_driver.c:2585 src/network/bridge_driver.c:2608 #: src/network/bridge_driver.c:2648 src/network/bridge_driver.c:2708 #: src/network/bridge_driver.c:2733 msgid "no network with matching uuid" msgstr "일치하는 uuid의 네트워크 없음" #: src/network/bridge_driver.c:2149 src/network/bridge_driver.c:2949 #: src/network/bridge_driver.c:3314 src/network/bridge_driver.c:3491 #: src/network/bridge_driver.c:3638 #, c-format msgid "no network with matching name '%s'" msgstr "일치하는 '%s'라는 이름의 네트워크 없음" #: src/network/bridge_driver.c:2338 #, c-format msgid "" " element specified for network %s, whose type doesn't support vlan " "configuration" msgstr "" #: src/network/bridge_driver.c:2438 msgid "" "Multiple dhcp sections found. dhcp is supported only for a single IPv4 " "address on each network" msgstr "" #: src/network/bridge_driver.c:2504 msgid "network is still active" msgstr "네트워크가 아직 실행 중" #: src/network/bridge_driver.c:2614 msgid "network is not active" msgstr "네트워크가 실행중이 아님" #: src/network/bridge_driver.c:2676 msgid "no network with matching id" msgstr "id가 일치하는 네트워크 없음" #: src/network/bridge_driver.c:2682 src/test/test_driver.c:3271 #, c-format msgid "network '%s' does not have a bridge name." msgstr "네트워크 '%s'가 브리지 이름을 가지고 있지 않습니다." #: src/network/bridge_driver.c:2739 msgid "cannot set autostart for transient network" msgstr "임시 네트워크에 대해 autostart를 설정할 수 없음" #: src/network/bridge_driver.c:2754 #, c-format msgid "cannot create autostart directory '%s'" msgstr "autostart 디렉터리 '%s'를 생성할 수 없음" #: src/network/bridge_driver.c:2761 src/storage/storage_driver.c:1056 #, c-format msgid "Failed to create symlink '%s' to '%s'" msgstr "심볼릭 링크 '%s'를 '%s'에 대해 만들 수 없음" #: src/network/bridge_driver.c:2850 #, fuzzy, c-format msgid "Could not get Virtual functions on %s" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: src/network/bridge_driver.c:2857 #, c-format msgid "No Vf's present on SRIOV PF %s" msgstr "" #: src/network/bridge_driver.c:2884 #, fuzzy msgid "Direct mode types require interface names" msgstr "인터페이스 %s를 파괴하는 데 실패" #: src/network/bridge_driver.c:3021 #, fuzzy, c-format msgid "" " not supported for network '%s' which uses a bridge " "device" msgstr "이더넷 인터페이스에 대해 스크립트 실행이 지원되지 않습니다" #: src/network/bridge_driver.c:3052 src/network/bridge_driver.c:3193 #, c-format msgid "" "network '%s' requires exclusive access to interfaces, but none are available" msgstr "" #: src/network/bridge_driver.c:3081 #, c-format msgid "" " not supported for network '%s' which uses an SR-IOV " "Virtual Function via PCI passthrough" msgstr "" #: src/network/bridge_driver.c:3138 #, fuzzy, c-format msgid "" " not supported for network '%s' which uses a macvtap " "device" msgstr "이더넷 인터페이스에 대해 스크립트 실행이 지원되지 않습니다" #: src/network/bridge_driver.c:3151 #, c-format msgid "" "network '%s' uses a direct mode, but has no forward dev and no interface pool" msgstr "" #: src/network/bridge_driver.c:3237 #, c-format msgid "" "an interface connecting to network '%s' is requesting a vlan tag, but that " "is not supported for this type of network" msgstr "" #: src/network/bridge_driver.c:3243 #, c-format msgid "" "an interface of type '%s' is requesting a vlan tag, but that is not " "supported for this type of connection" msgstr "" #: src/network/bridge_driver.c:3333 #, c-format msgid "" "network '%s' uses a direct or hostdev mode, but has no forward dev and no " "interface pool" msgstr "" #: src/network/bridge_driver.c:3345 src/network/bridge_driver.c:3518 msgid "the interface uses a direct mode, but has no source dev" msgstr "" #: src/network/bridge_driver.c:3362 src/network/bridge_driver.c:3534 #, fuzzy, c-format msgid "network '%s' doesn't have dev='%s' in use by domain" msgstr "네트워크 '%s'가 브리지 이름을 가지고 있지 않습니다." #: src/network/bridge_driver.c:3379 #, fuzzy, c-format msgid "network '%s' claims dev='%s' is already in use by a different domain" msgstr "네트워크가 이미 동작함" #: src/network/bridge_driver.c:3396 src/network/bridge_driver.c:3550 msgid "the interface uses a hostdev mode, but has no hostdev" msgstr "" #: src/network/bridge_driver.c:3414 src/network/bridge_driver.c:3566 #, fuzzy, c-format msgid "network '%s' doesn't have PCI device %04x:%02x:%02x.%x in use by domain" msgstr "네트워크 '%s'가 브리지 이름을 가지고 있지 않습니다." #: src/network/bridge_driver.c:3431 #, fuzzy, c-format msgid "" "network '%s' claims the PCI device at domain=%d bus=%d slot=%d function=%d " "is already in use by a different domain" msgstr "네트워크가 이미 동작함" #: src/network/bridge_driver.c:3506 #, c-format msgid "" "network '%s' uses a direct/hostdev mode, but has no forward dev and no " "interface pool" msgstr "" #: src/network/bridge_driver.c:3652 #, fuzzy, c-format msgid "network '%s' doesn't have an IPv4 address" msgstr "네트워크 '%s'가 브리지 이름을 가지고 있지 않습니다." #: src/network/bridge_driver.c:3674 #, fuzzy, c-format msgid "network '%s' has no associated interface or bridge" msgstr "네트워크 '%s'가 브리지 이름을 가지고 있지 않습니다." #: src/node_device/node_device_driver.c:88 #, c-format msgid "cannot resolve driver link %s" msgstr "드라이버 링크 %s를 결정할 수 없음" #: src/node_device/node_device_driver.c:275 #: src/node_device/node_device_driver.c:305 #: src/node_device/node_device_driver.c:341 #: src/node_device/node_device_driver.c:372 src/test/test_driver.c:5163 #: src/test/test_driver.c:5189 src/test/test_driver.c:5225 #: src/test/test_driver.c:5256 #, c-format msgid "no node device with matching name '%s'" msgstr "이름이 '%s'와 일치하는 노드 디바이스가 없음" #: src/node_device/node_device_driver.c:316 src/test/test_driver.c:5200 msgid "no parent for this device" msgstr "이 장치에 대한 부모가 없음" #: src/node_device/node_device_driver.c:418 #, c-format msgid "Invalid vport operation (%d)" msgstr "잘못된 vport 작업 (%d)" #: src/node_device/node_device_driver.c:448 #, fuzzy, c-format msgid "No vport operation path found for host%d" msgstr "Vport 작업 경로는 '%s'입니다" #: src/node_device/node_device_driver.c:469 #, c-format msgid "Write of '%s' to '%s' during vport create/delete failed" msgstr "vport 생성/삭제 중 '%s'를 '%s'에 쓰기가 실패했습니다" #: src/node_device/node_device_driver.c:478 msgid "Vport operation complete" msgstr "Vport 작업이 완료되었습니다" #: src/node_device/node_device_driver.c:491 msgid "Could not get current time" msgstr "현재 시간을 얻을 수 없음" #: src/node_device/node_device_hal.c:615 #, c-format msgid "DBus not available, disabling HAL driver: %s" msgstr "" #: src/node_device/node_device_hal.c:624 msgid "libhal_ctx_new returned NULL" msgstr "" #: src/node_device/node_device_hal.c:629 msgid "libhal_ctx_set_dbus_connection failed" msgstr "" #: src/node_device/node_device_hal.c:633 msgid "libhal_ctx_init failed, haldaemon is probably not running" msgstr "" #: src/node_device/node_device_hal.c:658 #, fuzzy msgid "setting up HAL callbacks failed" msgstr "VNC 암호 설정이 실패했습니다" #: src/node_device/node_device_hal.c:664 src/node_device/node_device_hal.c:725 msgid "libhal_get_all_devices failed" msgstr "" #: src/node_device/node_device_hal.c:677 src/qemu/qemu_migration.c:926 #: src/qemu/qemu_migration.c:949 src/qemu/qemu_migration.c:955 #, fuzzy, c-format msgid "%s: %s" msgstr "cd: %s: %s" #: src/node_device/node_device_linux_sysfs.c:59 #, c-format msgid "Failed to open WWN path '%s' for reading" msgstr "WWN 경로 '%s'를 읽기 위해 열기 실패" #: src/node_device/node_device_linux_sysfs.c:137 #, c-format msgid "Failed to read WWPN for host%d" msgstr "host%d에 대한 WWPN 읽기 실패" #: src/node_device/node_device_linux_sysfs.c:146 #, c-format msgid "Failed to read WWNN for host%d" msgstr "host%d에 대한 WWNN 읽기 실패" #: src/node_device/node_device_linux_sysfs.c:154 #, fuzzy, c-format msgid "Failed to read fabric WWN for host%d" msgstr "host%d에 대한 WWNN 읽기 실패" #: src/node_device/node_device_udev.c:64 #, fuzzy, c-format msgid "Failed to convert '%s' to unsigned long long" msgstr "'%s'를 정수로 변환할 수 없음" #: src/node_device/node_device_udev.c:82 src/util/pci.c:1803 #, fuzzy, c-format msgid "Failed to convert '%s' to unsigned int" msgstr "'%s'를 정수로 변환할 수 없음" #: src/node_device/node_device_udev.c:99 #, fuzzy, c-format msgid "Failed to convert '%s' to int" msgstr "%s를 %s로 설정하는 데 실패" #: src/node_device/node_device_udev.c:129 #, c-format msgid "" "Failed to allocate memory for property value for property key '%s' on device " "with sysname '%s'" msgstr "" #: src/node_device/node_device_udev.c:218 #, c-format msgid "" "Failed to allocate memory for sysfs attribute value for sysfs attribute '%s' " "on device with sysname '%s'" msgstr "" #: src/node_device/node_device_udev.c:336 #, c-format msgid "Buffer error when generating device name for device with sysname '%s'" msgstr "" #: src/node_device/node_device_udev.c:654 #, c-format msgid "SCSI host found, but its udev name '%s' does not begin with 'host'" msgstr "" #: src/node_device/node_device_udev.c:822 #, fuzzy, c-format msgid "Failed to process SCSI device with sysfs path '%s'" msgstr "sysfs 경로 '%s'를 opendir하는 데 실패" #: src/node_device/node_device_udev.c:1194 #, fuzzy, c-format msgid "Unknown device type %d" msgstr "알려지지 않은 장치 유형 " #: src/node_device/node_device_udev.c:1245 #, fuzzy, c-format msgid "Could not get syspath for parent of '%s'" msgstr "%s상의 매체를 꺼내기할 수 없음" #: src/node_device/node_device_udev.c:1327 #: src/node_device/node_device_udev.c:1591 #, fuzzy, c-format msgid "Failed to create device for '%s'" msgstr "%s로부터 노드 장치를 생성하는 데 실패" #: src/node_device/node_device_udev.c:1379 #, fuzzy, c-format msgid "udev scan devices returned %d" msgstr "노드 장치 %s가 %s로부터 생성되었습니다\n" #: src/node_device/node_device_udev.c:1455 #, c-format msgid "" "File descriptor returned by udev %d does not match node device file " "descriptor %d" msgstr "" #: src/node_device/node_device_udev.c:1462 msgid "udev_monitor_receive_device returned NULL" msgstr "" #: src/node_device/node_device_udev.c:1501 #, fuzzy, c-format msgid "Failed to get udev device for syspath '%s' or '%s'" msgstr "%s로부터 노드 장치를 생성하는 데 실패" #: src/node_device/node_device_udev.c:1625 #, fuzzy, c-format msgid "Failed to initialize libpciaccess: %s" msgstr "인증서를 초기화할 수 없습니다: %s" #: src/node_device/node_device_udev.c:1649 #, fuzzy msgid "Failed to initialize mutex for driverState" msgstr "이벤트 시스템을 초기화하는 데 실패했습니다" #: src/node_device/node_device_udev.c:1670 msgid "udev_monitor_new_from_netlink returned NULL" msgstr "" #: src/nodeinfo.c:104 src/nodeinfo.c:143 src/nodeinfo.c:793 src/nodeinfo.c:830 #: src/nodeinfo.c:895 src/uml/uml_driver.c:2373 src/util/command.c:352 #: src/util/pci.c:1629 #, c-format msgid "cannot open %s" msgstr "%s를 열 수 없음" #: src/nodeinfo.c:109 src/nodeinfo.c:149 #, c-format msgid "cannot read from %s" msgstr "%s에서 읽을 수 없음" #: src/nodeinfo.c:114 #, c-format msgid "could not convert '%s' to an integer" msgstr "'%s'를 정수로 변환할 수 없음" #: src/nodeinfo.c:226 #, c-format msgid "cannot opendir %s" msgstr "%s를 열 수 없음" #: src/nodeinfo.c:254 src/nodeinfo.c:313 src/nodeinfo.c:470 #, fuzzy, c-format msgid "problem reading %s" msgstr "비밀정보 읽기 오류: %s" #: src/nodeinfo.c:288 msgid "CPU socket topology has changed" msgstr "" #: src/nodeinfo.c:334 src/nodeinfo.c:516 #, fuzzy, c-format msgid "problem closing %s" msgstr "비밀정보 읽기 오류: %s" #: src/nodeinfo.c:376 src/nodeinfo.c:399 #, fuzzy msgid "parsing cpu MHz from cpuinfo" msgstr "cpuinfo cpu MHz 구문 분석 중" #: src/nodeinfo.c:497 #, fuzzy msgid "no CPUs found" msgstr "cpu를 찾을 수 없습니다" #: src/nodeinfo.c:502 msgid "no sockets found" msgstr "소켓을 찾을 수 없습니다" #: src/nodeinfo.c:507 msgid "no threads found" msgstr "쓰레드를 찾을 수 없습니다" #: src/nodeinfo.c:547 #, c-format msgid "nparams in %s must be equal to %d" msgstr "" #: src/nodeinfo.c:579 src/nodeinfo.c:588 src/nodeinfo.c:597 src/nodeinfo.c:606 #, fuzzy msgid "Field kernel cpu time too long for destination" msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #: src/nodeinfo.c:623 #, fuzzy, c-format msgid "Invalid cpuNum in %s" msgstr "잘못된 pid" #: src/nodeinfo.c:668 #, c-format msgid "nparams in %s must be %d" msgstr "" #: src/nodeinfo.c:692 #, fuzzy msgid "no prefix found" msgstr "cpu를 찾을 수 없습니다" #: src/nodeinfo.c:711 #, fuzzy msgid "Field kernel memory too long for destination" msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #: src/nodeinfo.c:725 msgid "no available memory line found" msgstr "" #: src/nodeinfo.c:811 msgid "node info not implemented on this platform" msgstr "이 플랫폼에는 노드 정보가 구현되어 있지 않습니다" #: src/nodeinfo.c:840 #, fuzzy msgid "node CPU stats not implemented on this platform" msgstr "이 플랫폼에는 노드 정보가 구현되어 있지 않습니다" #: src/nodeinfo.c:870 src/nodeinfo.c:1025 src/nodeinfo.c:1063 msgid "NUMA not supported on this host" msgstr "이 호스트는 NUMA를 지원하지 않습니다" #: src/nodeinfo.c:879 #, c-format msgid "cellNum in %s must be less than or equal to %d" msgstr "" #: src/nodeinfo.c:907 #, fuzzy msgid "node memory stats not implemented on this platform" msgstr "이 플랫폼에는 노드 정보가 구현되어 있지 않습니다" #: src/nodeinfo.c:931 #, fuzzy msgid "node cpumap not implemented on this platform" msgstr "이 플랫폼에는 노드 정보가 구현되어 있지 않습니다" #: src/nodeinfo.c:1031 #, c-format msgid "start cell %d out of range (0-%d)" msgstr "시작 셀 %d 범위 초과 (0-%d)" #: src/nodeinfo.c:1043 #, fuzzy, c-format msgid "Failed to query NUMA free memory for node: %d" msgstr "NUMA 가용 메모리 질의 실패" #: src/nodeinfo.c:1071 msgid "Failed to query NUMA free memory" msgstr "NUMA 가용 메모리 질의 실패" #: src/nodeinfo.c:1092 src/nodeinfo.c:1099 msgid "NUMA memory information not available on this platform" msgstr "이 플랫폼에 사용 가능한 NUMA 메모리 정보가 없음" #: src/nwfilter/nwfilter_dhcpsnoop.c:577 #, c-format msgid "virNWFilterSnoopReqNew called with invalid key \"%s\" (%zu)" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:890 msgid "virNWFilterSnoopListDel failed" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1117 #, fuzzy msgid "pcap_create failed" msgstr "epoll_create(2)가 실패했습니다" #: src/nwfilter/nwfilter_dhcpsnoop.c:1125 msgid "setup of pcap handle failed" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1131 #, c-format msgid "pcap_compile: %s" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1137 #, fuzzy, c-format msgid "pcap_setfilter: %s" msgstr "파일 '%s'를 닫을 수 없음" #: src/nwfilter/nwfilter_dhcpsnoop.c:1143 #, fuzzy, c-format msgid "pcap_setdirection: %s" msgstr "디렉터리를 열 수 없음: %s" #: src/nwfilter/nwfilter_dhcpsnoop.c:1178 #, fuzzy, c-format msgid "Instantiation of rules failed on interface '%s'" msgstr "인터페이스 '%s'를 가져오는 데 실패" #: src/nwfilter/nwfilter_dhcpsnoop.c:1484 #, fuzzy, c-format msgid "interface '%s' failing; reopening" msgstr "인터페이스 %s가 이미 존재합니다" #: src/nwfilter/nwfilter_dhcpsnoop.c:1538 #, fuzzy, c-format msgid "Job submission failed on interface '%s'" msgstr "인터페이스 '%s'를 가져오는 데 실패" #: src/nwfilter/nwfilter_dhcpsnoop.c:1644 #: src/nwfilter/nwfilter_learnipaddr.c:677 msgid "" "IP parameter must be provided since snooping the IP address does not work " "possibly due to missing tools" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1656 msgid "applyDHCPOnlyRules failed - spoofing not protected!" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1663 #, c-format msgid "virNWFilterDHCPSnoopReq: can't copy variables on if %s" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1673 #, c-format msgid "" "virNWFilterDHCPSnoopReq ifname map failed on interface \"%s\" key \"%s\"" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1682 #, c-format msgid "virNWFilterDHCPSnoopReq req add failed on interface \"%s\" ifkey \"%s\"" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1694 #, c-format msgid "virNWFilterDHCPSnoopReq virThreadCreate failed on interface '%s'" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1704 #, c-format msgid "Activation of snoop request failed on interface '%s'" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1711 #, fuzzy, c-format msgid "Restoring of leases failed on interface '%s'" msgstr "인터페이스 '%s'를 가져오는 데 실패" #: src/nwfilter/nwfilter_dhcpsnoop.c:1790 #, fuzzy msgid "lease file write failed" msgstr "%s: 로그 파일 쓰기 실패: %s" #: src/nwfilter/nwfilter_dhcpsnoop.c:1897 #, c-format msgid "unlink(\"%s\")" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1902 #, c-format msgid "open(\"%s\")" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1916 src/qemu/qemu_driver.c:2813 #: src/qemu/qemu_driver.c:2828 src/qemu/qemu_driver.c:3404 #: src/vbox/vbox_tmpl.c:9205 #, fuzzy, c-format msgid "unable to close %s" msgstr "%s를 열 수 없음" #: src/nwfilter/nwfilter_dhcpsnoop.c:1922 #, fuzzy, c-format msgid "rename(\"%s\", \"%s\")" msgstr "rename(%s, %s) 실패" #: src/nwfilter/nwfilter_dhcpsnoop.c:1952 #: src/nwfilter/nwfilter_dhcpsnoop.c:1961 #, c-format msgid "virNWFilterSnoopLeaseFileLoad lease file line %d corrupt" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1978 #, c-format msgid "virNWFilterSnoopLeaseFileLoad req add failed on interface \"%s\"" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:1986 #, c-format msgid "line %d corrupt ipaddr \"%s\"" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:2130 #, c-format msgid "ifname \"%s\" not in key map" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:2144 #, c-format msgid "ifkey \"%s\" has no req" msgstr "" #: src/nwfilter/nwfilter_dhcpsnoop.c:2226 msgid "libvirt was not compiled with libpcap and \"" msgstr "" #: src/nwfilter/nwfilter_driver.c:207 msgid "DBus matches could not be installed. Disabling nwfilter driver" msgstr "" #: src/nwfilter/nwfilter_driver.c:397 src/nwfilter/nwfilter_driver.c:547 #: src/nwfilter/nwfilter_driver.c:595 #, fuzzy msgid "no nwfilter with matching uuid" msgstr "uuid가 일치하는 풀이 없음" #: src/nwfilter/nwfilter_driver.c:423 #, fuzzy, c-format msgid "no nwfilter with matching name '%s'" msgstr "일치하는 '%s'라는 이름의 네트워크 없음" #: src/nwfilter/nwfilter_driver.c:554 msgid "nwfilter is in use" msgstr "" #: src/nwfilter/nwfilter_ebiptables_driver.c:250 #, fuzzy, c-format msgid "Buffer too small to print variable '%s' into" msgstr "인터페이스 이름 또는 MAC 주소" #: src/nwfilter/nwfilter_ebiptables_driver.c:286 #, fuzzy msgid "buffer too small for IP address" msgstr "불충분한 PCI 주소 설정 값" #: src/nwfilter/nwfilter_ebiptables_driver.c:300 msgid "buffer too small for IPv6 address" msgstr "" #: src/nwfilter/nwfilter_ebiptables_driver.c:311 #, fuzzy msgid "Buffer too small for MAC address" msgstr "인터페이스 이름 또는 MAC 주소" #: src/nwfilter/nwfilter_ebiptables_driver.c:323 #: src/nwfilter/nwfilter_ebiptables_driver.c:353 msgid "Buffer too small for uint8 type" msgstr "" #: src/nwfilter/nwfilter_ebiptables_driver.c:333 #, fuzzy msgid "Buffer too small for uint32 type" msgstr "인터페이스 이름 또는 MAC 주소" #: src/nwfilter/nwfilter_ebiptables_driver.c:343 msgid "Buffer too small for uint16 type" msgstr "" #: src/nwfilter/nwfilter_ebiptables_driver.c:361 #, fuzzy msgid "Buffer to small for ipset name" msgstr "인터페이스 이름 또는 MAC 주소" #: src/nwfilter/nwfilter_ebiptables_driver.c:393 #, fuzzy msgid "Buffer too small for IPSETFLAGS type" msgstr "인터페이스 이름 또는 MAC 주소" #: src/nwfilter/nwfilter_ebiptables_driver.c:402 #, fuzzy, c-format msgid "Unhandled datatype %x" msgstr "잘못된 도메인 유형 %s" #: src/nwfilter/nwfilter_ebiptables_driver.c:1305 #, fuzzy, c-format msgid "cannot create rule since %s tool is missing." msgstr "디렉터리 %s를 생성할 수 없음" #: src/nwfilter/nwfilter_ebiptables_driver.c:2023 msgid "cannot create rule since ebtables tool is missing." msgstr "" #: src/nwfilter/nwfilter_ebiptables_driver.c:2124 #, c-format msgid "" "STP filtering in %s direction with source MAC address set is not supported" msgstr "" #: src/nwfilter/nwfilter_ebiptables_driver.c:2691 msgid "illegal protocol type" msgstr "" #: src/nwfilter/nwfilter_ebiptables_driver.c:3207 #: src/nwfilter/nwfilter_ebiptables_driver.c:3304 #: src/nwfilter/nwfilter_ebiptables_driver.c:3440 msgid "cannot create rules since ebtables tool is missing." msgstr "" #: src/nwfilter/nwfilter_ebiptables_driver.c:3266 #: src/nwfilter/nwfilter_ebiptables_driver.c:3416 #: src/nwfilter/nwfilter_ebiptables_driver.c:3486 msgid "Some rules could not be created." msgstr "" #: src/nwfilter/nwfilter_ebiptables_driver.c:3591 #, c-format msgid "To enable ip%stables filtering for the VM do 'echo 1 > %s'" msgstr "" #: src/nwfilter/nwfilter_ebiptables_driver.c:3918 #, fuzzy, c-format msgid "Some rules could not be created for interface %s%s%s" msgstr "%s %s 인터페이스 상태 보기 실패" #: src/nwfilter/nwfilter_ebiptables_driver.c:4058 #, fuzzy msgid "error while executing CLI commands" msgstr "%s 주소 정보를 얻는 중 오류 발생" #: src/nwfilter/nwfilter_ebiptables_driver.c:4244 #, fuzzy, c-format msgid "Testing of ebtables command failed: %s" msgstr "%s: 편집 명령이 실패했습니다: %s" #: src/nwfilter/nwfilter_ebiptables_driver.c:4261 #, fuzzy, c-format msgid "Testing of iptables command failed: %s" msgstr "%s: 편집 명령이 실패했습니다: %s" #: src/nwfilter/nwfilter_ebiptables_driver.c:4278 #, fuzzy, c-format msgid "Testing of ip6tables command failed: %s" msgstr "%s: 편집 명령이 실패했습니다: %s" #: src/nwfilter/nwfilter_ebiptables_driver.c:4315 msgid "essential tools to support ip(6)tables firewalls could not be located" msgstr "" #: src/nwfilter/nwfilter_ebiptables_driver.c:4322 msgid "firewall tools were not found or cannot be used" msgstr "" #: src/nwfilter/nwfilter_gentech_driver.c:165 msgid "Could not add variable 'MAC' to hashmap" msgstr "" #: src/nwfilter/nwfilter_gentech_driver.c:179 msgid "Could not add variable 'IP' to hashmap" msgstr "" #: src/nwfilter/nwfilter_gentech_driver.c:431 #: src/nwfilter/nwfilter_gentech_driver.c:543 #: src/nwfilter/nwfilter_gentech_driver.c:862 #, fuzzy, c-format msgid "Filter '%s' is in use." msgstr "네트워크 '%s'가 동작중이 아닙니다" #: src/nwfilter/nwfilter_gentech_driver.c:479 #: src/nwfilter/nwfilter_gentech_driver.c:586 #, fuzzy, c-format msgid "referenced filter '%s' is missing" msgstr "설정 값 %s가 빠졌습니다" #: src/nwfilter/nwfilter_gentech_driver.c:725 #, c-format msgid "filter '%s' learning value '%s' invalid." msgstr "" #: src/nwfilter/nwfilter_gentech_driver.c:801 #, c-format msgid "" "Cannot instantiate filter due to unresolvable variables or unavailable list " "elements: %s" msgstr "" #: src/nwfilter/nwfilter_gentech_driver.c:844 #: src/nwfilter/nwfilter_gentech_driver.c:1072 #: src/nwfilter/nwfilter_gentech_driver.c:1098 #: src/nwfilter/nwfilter_gentech_driver.c:1123 #, fuzzy, c-format msgid "Could not get access to ACL tech driver '%s'" msgstr "타입파일 '%s'를 읽을 수 없음" #: src/nwfilter/nwfilter_gentech_driver.c:855 #, fuzzy, c-format msgid "Could not find filter '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/nwfilter/nwfilter_gentech_driver.c:1202 #, fuzzy, c-format msgid "Failure while applying current filter on VM %s" msgstr "%s 로그 출력을 읽는 데 실패" #: src/nwfilter/nwfilter_learnipaddr.c:152 #, fuzzy msgid "mutex initialization failed" msgstr "인증이 실패했습니다" #: src/nwfilter/nwfilter_learnipaddr.c:159 #, fuzzy, c-format msgid "interface name %s does not fit into buffer " msgstr "인터페이스 %s가 존재하지 않습니다" #: src/nwfilter/nwfilter_learnipaddr.c:594 #, fuzzy, c-format msgid "Failed to add IP address %s to IP address cache for interface %s" msgstr "인터페이스 %s를 파괴하는 데 실패" #: src/nwfilter/nwfilter_learnipaddr.c:613 #, c-format msgid "encountered an error on interface %s index %d" msgstr "" #: src/nwfilter/nwfilter_learnipaddr.c:705 #, c-format msgid "Destination buffer for ifname ('%s') not large enough" msgstr "" #: src/nwfilter/nwfilter_learnipaddr.c:713 #, c-format msgid "Destination buffer for linkdev ('%s') not large enough" msgstr "" #: src/nwfilter/nwfilter_learnipaddr.c:765 msgid "" "IP parameter must be given since libvirt was not compiled with IP address " "learning support" msgstr "" #: src/openvz/openvz_conf.c:124 msgid "Could not extract vzctl version" msgstr "vzctl 버전을 가져올 수 없음" #: src/openvz/openvz_conf.c:238 #, c-format msgid "Could not read 'IP_ADDRESS' from config for container %d" msgstr "컨테이너 %d에 대해 config에서 'IP_ADDRESS'를 읽을 수 없음" #: src/openvz/openvz_conf.c:270 #, c-format msgid "Could not read 'NETIF' from config for container %d" msgstr "컨테이너 %d에 대해 config에서 'NETIF'를 읽을 수 없음" #: src/openvz/openvz_conf.c:296 msgid "Too long network device name" msgstr "너무 긴 네트워크 장치 이름" #: src/openvz/openvz_conf.c:305 #, c-format msgid "Network ifname %s too long for destination" msgstr "너무 긴 목적지 네트워크 ifname %s" #: src/openvz/openvz_conf.c:313 msgid "Too long bridge device name" msgstr "너무 긴 브리지 장치 이름" #: src/openvz/openvz_conf.c:322 #, c-format msgid "Bridge name %s too long for destination" msgstr "너무 긴 목적지 브리지 이름 %s" #: src/openvz/openvz_conf.c:330 msgid "Wrong length MAC address" msgstr "잘못된 MAC 주소 길이" #: src/openvz/openvz_conf.c:335 #, c-format msgid "MAC address %s too long for destination" msgstr "너무 긴 목적지 MAC 주소 %s" #: src/openvz/openvz_conf.c:340 msgid "Wrong MAC address" msgstr "잘못된 MAC 주소" #: src/openvz/openvz_conf.c:415 #, c-format msgid "Could not read 'OSTEMPLATE' from config for container %d" msgstr "컨테이너 %d에 대해 config에서 'OSTEMPLATE'를 읽을 수 없음" #: src/openvz/openvz_conf.c:429 #, c-format msgid "Could not read 'VE_PRIVATE' from config for container %d" msgstr "컨테이너 %d에 대해 config에서 'VE_PRIVATE'를 읽을 수 없음" #: src/openvz/openvz_conf.c:453 src/openvz/openvz_conf.c:507 #: src/openvz/openvz_conf.c:529 #, fuzzy, c-format msgid "Could not read '%s' from config for container %d" msgstr "컨테이너 %d에 대해 config에서 'NETIF'를 읽을 수 없음" #: src/openvz/openvz_conf.c:461 #, fuzzy msgid "Unable to parse quota" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: src/openvz/openvz_conf.c:514 #, fuzzy, c-format msgid "Could not parse barrier of '%s' from config for container %d" msgstr "컨테이너 %d에 대해 config에서 'NETIF'를 읽을 수 없음" #: src/openvz/openvz_conf.c:536 #, fuzzy, c-format msgid "Could not parse barrier and limit of '%s' from config for container %d" msgstr "컨테이너 %d에 대해 config에서 'NETIF'를 읽을 수 없음" #: src/openvz/openvz_conf.c:596 src/openvz/openvz_conf.c:1185 #: src/openvz/openvz_driver.c:1918 msgid "Failed to parse vzlist output" msgstr "vslist 출력 구문 분석 실패" #: src/openvz/openvz_conf.c:633 src/parallels/parallels_driver.c:441 msgid "UUID in config file malformed" msgstr "설정 파일내의 UUID가 잘못 됨" #: src/openvz/openvz_conf.c:645 #, c-format msgid "Could not read config for container %d" msgstr "컨테이너 %d에 대한 설정을 읽을 수 없음" #: src/openvz/openvz_conf.c:665 #, c-format msgid "Duplicate container UUID %s detected for %d" msgstr "" #: src/openvz/openvz_conf.c:672 #, fuzzy, c-format msgid "Could not add UUID for container %d" msgstr "컨테이너 %d에 대한 설정을 읽을 수 없음" #: src/openvz/openvz_conf.c:1040 #, fuzzy, c-format msgid "invalid uuid %s" msgstr "잘못된 pid" #: src/openvz/openvz_conf.c:1147 #, fuzzy msgid "Failed to scan configuration directory" msgstr "설정 파일 읽기 실패" #: src/openvz/openvz_driver.c:116 msgid "Container is not defined" msgstr "컨테치너가 정의되지 않았습니다" #: src/openvz/openvz_driver.c:141 msgid "only one filesystem supported" msgstr "오직 하나의 파일시스템만 지원됨" #: src/openvz/openvz_driver.c:150 msgid "filesystem is not of type 'template' or 'mount'" msgstr "파일시스템 유형이 'template'나 'mount'가 아닙니다" #: src/openvz/openvz_driver.c:161 src/openvz/openvz_driver.c:2067 msgid "Could not convert domain name to VEID" msgstr "도메인 명을 VEID로 변환할 수 없음" #: src/openvz/openvz_driver.c:167 msgid "Could not copy default config" msgstr "기본 설정을 복사할 수 없음" #: src/openvz/openvz_driver.c:173 msgid "Could not set the source dir for the filesystem" msgstr "파일시스템에 대해 소스 디렉터리를 설정할 수 없음" #: src/openvz/openvz_driver.c:220 msgid "Can't set soft limit without hard limit" msgstr "" #: src/openvz/openvz_driver.c:262 #, fuzzy, c-format msgid "Hostname of '%s' is unset" msgstr "'%s'에 대한 stat이 실패했습니다" #: src/openvz/openvz_driver.c:411 #, c-format msgid "cannot read cputime for domain %d" msgstr "도메인 %d에 대한 cputime을 읽을 수 없음" #: src/openvz/openvz_driver.c:655 src/openvz/openvz_driver.c:706 #: src/vmware/vmware_driver.c:398 src/vmware/vmware_driver.c:457 #: src/vmware/vmware_driver.c:555 msgid "domain is not in running state" msgstr "도메인이 실행 상태가 아닙니다" #: src/openvz/openvz_driver.c:796 msgid "Container ID is not specified" msgstr "컨테이너 ID가 지정되지 않았습니다" #: src/openvz/openvz_driver.c:832 msgid "Could not generate eth name for container" msgstr "컨테이너에 대한 eth 이름을 생성할 수 없음" #: src/openvz/openvz_driver.c:844 msgid "Could not generate veth name" msgstr "veth 이름을 생성할 수 없음" #: src/openvz/openvz_driver.c:896 #, c-format msgid "Could not put argument to %s" msgstr "%s에 인자를 넣을 수 없음" #: src/openvz/openvz_driver.c:925 msgid "Could not configure network" msgstr "네트워크를 설정할 수 없음" #: src/openvz/openvz_driver.c:936 msgid "cannot replace NETIF config" msgstr "NETIF 설정을 대치할 수 없음" #: src/openvz/openvz_driver.c:968 #, c-format msgid "Already an OPENVZ VM active with the id '%s'" msgstr "id '%s'로 동작중인 OPENVZ VM이 이미 있음" #: src/openvz/openvz_driver.c:979 src/openvz/openvz_driver.c:1067 msgid "Error creating initial configuration" msgstr "초기 설정 생성 오류" #: src/openvz/openvz_driver.c:986 src/openvz/openvz_driver.c:1074 #, fuzzy msgid "Could not set disk quota" msgstr "도메인 상태를 얻는 데 실패" #: src/openvz/openvz_driver.c:993 src/openvz/openvz_driver.c:1081 msgid "Could not set UUID" msgstr "UUID를 설정할 수 없음" #: src/openvz/openvz_driver.c:1002 src/vbox/vbox_tmpl.c:5095 msgid "current vcpu count must equal maximum" msgstr "" #: src/openvz/openvz_driver.c:1008 src/openvz/openvz_driver.c:1101 msgid "Could not set number of virtual cpu" msgstr "가상 CPU의 갯수를 설정할 수 없음" #: src/openvz/openvz_driver.c:1016 msgid "Could not set memory size" msgstr "메모리 크기를 설정할 수 없음" #: src/openvz/openvz_driver.c:1054 #, c-format msgid "Already an OPENVZ VM defined with the id '%s'" msgstr "id '%s'로 정의된 OPENVZ VM이 이미 있음" #: src/openvz/openvz_driver.c:1135 msgid "no domain with matching id" msgstr "일치하는 id의 도메인이 없음" #: src/openvz/openvz_driver.c:1144 src/vmware/vmware_driver.c:276 msgid "domain is not in shutoff state" msgstr "도메인이 shutoff 상태가 아닙니다" #: src/openvz/openvz_driver.c:1272 msgid "Could not read container config" msgstr "컨테이너 설정을 읽을 수 없음" #: src/openvz/openvz_driver.c:1296 src/qemu/qemu_driver.c:1152 #, c-format msgid "unknown type '%s'" msgstr "알려지지 않은 유형 '%s'" #: src/openvz/openvz_driver.c:1306 src/openvz/openvz_driver.c:1351 #, fuzzy, c-format msgid "unsupported flags (0x%x)" msgstr "지원되지 않는 플래그(0x%x)가 '%s'에 전달되었습니다" #: src/openvz/openvz_driver.c:1367 msgid "VCPUs should be >= 1" msgstr "VCPU는 >= 1이어야 합니다" #: src/openvz/openvz_driver.c:1417 #, c-format msgid "unexpected OpenVZ URI path '%s', try openvz:///system" msgstr "예기치 못한 OpenVZ URI 경로 '%s', openvz:///system을 시도하십시오" #: src/openvz/openvz_driver.c:1424 msgid "OpenVZ control file /proc/vz does not exist" msgstr "OpenVZ 컨트롤 파일 /proc/vz가 존재하지 않습니다" #: src/openvz/openvz_driver.c:1430 msgid "OpenVZ control file /proc/vz is not accessible" msgstr "OpenVZ 컨트롤 파일 /proc/vz를 억세스할 수 없습니다" #: src/openvz/openvz_driver.c:1525 src/openvz/openvz_driver.c:1580 #, c-format msgid "Could not parse VPS ID %s" msgstr "VPS ID %s를 구문분석 할 수 없음" #: src/openvz/openvz_driver.c:1536 src/openvz/openvz_driver.c:1595 #, fuzzy msgid "failed to close file" msgstr "파일 열기 실패" #: src/openvz/openvz_driver.c:1712 #, fuzzy, c-format msgid "Failed to get %s for %s: %d" msgstr "%s를 %s로 설정하는 데 실패" #: src/openvz/openvz_driver.c:1721 #, fuzzy msgid "Can't parse limit from " msgstr "비디오 램 '%s'을 구문 분석할 수 없음" #: src/openvz/openvz_driver.c:1728 #, fuzzy msgid "Can't parse barrier from " msgstr "비디오 램 '%s'을 구문 분석할 수 없음" #: src/openvz/openvz_driver.c:1752 #, fuzzy, c-format msgid "Failed to set %s for %s: value too large" msgstr "비밀정보 값 설정 실패" #: src/openvz/openvz_driver.c:1763 #, fuzzy, c-format msgid "Failed to set %s for %s: %d" msgstr "%s를 %s로 설정하는 데 실패" #: src/openvz/openvz_driver.c:1985 src/qemu/qemu_driver.c:8615 #: src/test/test_driver.c:2860 #, c-format msgid "invalid path, '%s' is not a known interface" msgstr "잘못된 경로, '%s'는 알려진 인터페이스가 이닙니다" #: src/openvz/openvz_driver.c:2020 msgid "Can only modify disk quota" msgstr "" #: src/openvz/openvz_driver.c:2031 #, fuzzy, c-format msgid "Can't modify device type '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/openvz/openvz_util.c:49 #, fuzzy msgid "Can't determine page size" msgstr "기본 비디오 유형을 결정할 수 없음" #: src/parallels/parallels_driver.c:73 #, fuzzy msgid "Can't parse prlctl output" msgstr "비디오 램 '%s'을 구문 분석할 수 없음" #: src/parallels/parallels_driver.c:669 #, fuzzy, c-format msgid "Unexpected Parallels URI path '%s', try parallels:///system" msgstr "예기치 못한 UML URI 경로 '%s', uml:///system을 시도하십시오" #: src/parallels/parallels_driver.c:881 src/qemu/qemu_driver.c:1323 #: src/qemu/qemu_driver.c:9585 src/qemu/qemu_driver.c:9853 #, c-format msgid "no domain with matching name '%s'" msgstr "이름이 '%s'와 일치하는 도메인이 없음" #: src/parallels/parallels_driver.c:1079 #, fuzzy, c-format msgid "domain '%s' not %s" msgstr "도메인이 '%s'가 일시중지되지 않았습니다" #: src/parallels/parallels_driver.c:1212 #, fuzzy msgid "changing display parameters is not supported by parallels driver" msgstr "SASL 메커니즘 %s가 서버에서 지원되지 않습니다" #: src/parallels/parallels_driver.c:1258 #, fuzzy msgid "changing serial device parameters is not supported by parallels driver" msgstr "이더넷 인터페이스에 대해 스크립트 실행이 지원되지 않습니다" #: src/parallels/parallels_driver.c:1273 #, fuzzy msgid "Only one video device is supported by parallels driver" msgstr "와치독 장치는 한개만 지원합니다" #: src/parallels/parallels_driver.c:1282 msgid "Only VGA video device is supported by parallels driver" msgstr "" #: src/parallels/parallels_driver.c:1289 msgid "Only one monitor is supported by parallels driver" msgstr "" #: src/parallels/parallels_driver.c:1299 msgid "" "Changing video acceleration parameters is not supported by parallels driver" msgstr "" #: src/parallels/parallels_driver.c:1307 msgid "Video RAM size should be multiple of 1Mb." msgstr "" #: src/parallels/parallels_driver.c:1343 #, fuzzy msgid "titles are not supported by parallels driver" msgstr "이더넷 인터페이스에 대해 스크립트 실행이 지원되지 않습니다" #: src/parallels/parallels_driver.c:1349 #, fuzzy msgid "blkio parameters are not supported by parallels driver" msgstr "비밀 저장소를 지원하지 않습니다" #: src/parallels/parallels_driver.c:1357 msgid "changing balloon parameters is not supported by parallels driver" msgstr "" #: src/parallels/parallels_driver.c:1364 msgid "Memory size should be multiple of 1Mb." msgstr "" #: src/parallels/parallels_driver.c:1383 #, fuzzy msgid "Memory parameter is not supported by parallels driver" msgstr "비밀 저장소를 지원하지 않습니다" #: src/parallels/parallels_driver.c:1391 msgid "current vcpus must be equal to maxvcpus" msgstr "" #: src/parallels/parallels_driver.c:1405 #, fuzzy msgid "changing cpu placement mode is not supported by parallels driver" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/parallels/parallels_driver.c:1414 #, fuzzy msgid "changing cpu mask is not supported by parallels driver" msgstr "SASL 메커니즘 %s가 서버에서 지원되지 않습니다" #: src/parallels/parallels_driver.c:1425 #, fuzzy msgid "cputune is not supported by parallels driver" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/parallels/parallels_driver.c:1434 #, fuzzy msgid "numa parameters are not supported by parallels driver" msgstr "이더넷 인터페이스에 대해 스크립트 실행이 지원되지 않습니다" #: src/parallels/parallels_driver.c:1444 msgid "" "on_reboot, on_poweroff and on_crash parameters are not supported by " "parallels driver" msgstr "" #: src/parallels/parallels_driver.c:1463 #, fuzzy msgid "changing OS parameters is not supported by parallels driver" msgstr "SASL 메커니즘 %s가 서버에서 지원되지 않습니다" #: src/parallels/parallels_driver.c:1470 #, fuzzy msgid "changing emulator is not supported by parallels driver" msgstr "SASL 메커니즘 %s가 서버에서 지원되지 않습니다" #: src/parallels/parallels_driver.c:1477 #, fuzzy msgid "changing features is not supported by parallels driver" msgstr "SASL 메커니즘 %s가 서버에서 지원되지 않습니다" #: src/parallels/parallels_driver.c:1486 #, fuzzy msgid "changing clock parameters is not supported by parallels driver" msgstr "SASL 메커니즘 %s가 서버에서 지원되지 않습니다" #: src/parallels/parallels_driver.c:1503 #, fuzzy msgid "changing devices parameters is not supported by parallels driver" msgstr "SASL 메커니즘 %s가 서버에서 지원되지 않습니다" #: src/parallels/parallels_driver.c:1515 msgid "changing input devices parameters is not supported by parallels driver" msgstr "" #: src/parallels/parallels_driver.c:1551 #, fuzzy, c-format msgid "Can't find volume with path '%s'" msgstr "데이터를 파일 '%s'에 동기화할 수 없음" #: src/parallels/parallels_driver.c:1563 #, c-format msgid "Can't create VM '%s' without hard disks" msgstr "" #: src/parallels/parallels_driver.c:1564 src/parallels/parallels_driver.c:1654 msgid "(unnamed)" msgstr "" #: src/parallels/parallels_driver.c:1571 #, fuzzy, c-format msgid "Can't find storage pool with name '%s'" msgstr "이름이 '%s'와 일치하는 저장소 풀이 없음" #: src/parallels/parallels_driver.c:1579 #, fuzzy, c-format msgid "Can't find storage volume definition for path '%s'" msgstr "경로 '%s'와 일치하는 저장소 볼륨이 없습니다" #: src/parallels/parallels_driver.c:1620 #, fuzzy msgid "Can't parse XML desc" msgstr "비디오 램 '%s'을 구문 분석할 수 없음" #: src/parallels/parallels_driver.c:1625 #, fuzzy msgid "Already exists" msgstr "타겟 %s가 이미 존재합니다" #: src/parallels/parallels_driver.c:1640 #, fuzzy msgid "Can't allocate domobj" msgstr "메모리 할당 실패" #: src/parallels/parallels_driver.c:1653 #, fuzzy, c-format msgid "Domain for '%s' is not defined after creation" msgstr "도메인이 이전중 아닙니다" #: src/parallels/parallels_driver.c:1714 msgid "Can't find prlctl command in the PATH env" msgstr "" #: src/parallels/parallels_utils.c:84 #, fuzzy, c-format msgid "invalid output from prlctl: %s" msgstr "그룹 '%s' 검색에 실패했습니다" #: src/parallels/parallels_storage.c:41 #, fuzzy, c-format msgid "pool '%s' not found" msgstr "네트워크 '%s'를 찾을 수 없음" #: src/parallels/parallels_storage.c:92 src/storage/storage_backend_fs.c:828 #, c-format msgid "cannot open path '%s'" msgstr "'%s' 경로를 열 수 없음" #: src/parallels/parallels_storage.c:175 #, fuzzy msgid "Failed to load pool configs" msgstr "풀 %s를 만드는 데 실패" #: src/parallels/parallels_storage.c:400 src/storage/storage_backend_fs.c:912 #, c-format msgid "cannot statvfs path '%s'" msgstr "경로 '%s'를 statvfs할 수 없음" #: src/parallels/parallels_storage.c:431 #, fuzzy msgid "Only local directories are supported" msgstr "오직 1 %s 컨트롤러만이 지원됩니다" #: src/parallels/parallels_storage.c:487 #, fuzzy, c-format msgid "storage pool '%s' is still active" msgstr "저장소 풀이 아직 사용중입니다" #: src/parallels/parallels_storage.c:526 src/test/test_driver.c:4014 #: src/test/test_driver.c:4186 src/test/test_driver.c:4222 #: src/test/test_driver.c:4293 #, c-format msgid "storage pool '%s' is already active" msgstr "저장소 풀 '%s'가 이미 동작중입니다" #: src/parallels/parallels_storage.c:556 src/parallels/parallels_storage.c:593 #: src/parallels/parallels_storage.c:740 src/parallels/parallels_storage.c:775 #: src/parallels/parallels_storage.c:819 #: src/parallels/parallels_storage.c:1019 #: src/parallels/parallels_storage.c:1059 #: src/parallels/parallels_storage.c:1159 #: src/parallels/parallels_storage.c:1248 #: src/parallels/parallels_storage.c:1293 #: src/parallels/parallels_storage.c:1332 src/test/test_driver.c:4251 #: src/test/test_driver.c:4328 src/test/test_driver.c:4483 #: src/test/test_driver.c:4518 src/test/test_driver.c:4564 #: src/test/test_driver.c:4678 src/test/test_driver.c:4762 #: src/test/test_driver.c:4865 src/test/test_driver.c:4943 #: src/test/test_driver.c:4991 src/test/test_driver.c:5031 #, c-format msgid "storage pool '%s' is not active" msgstr "저장소 풀 '%s'가 이미 동작중이 아닙니다" #: src/parallels/parallels_storage.c:709 src/storage/storage_driver.c:1039 #: src/test/test_driver.c:4450 msgid "pool has no config file" msgstr "풀의 설정 파일이 없습니다" #: src/parallels/parallels_storage.c:827 #: src/parallels/parallels_storage.c:1076 #: src/parallels/parallels_storage.c:1153 #: src/parallels/parallels_storage.c:1242 #: src/parallels/parallels_storage.c:1287 #: src/parallels/parallels_storage.c:1326 src/storage/storage_driver.c:1185 #: src/storage/storage_driver.c:1462 src/storage/storage_driver.c:1606 #: src/storage/storage_driver.c:1668 src/storage/storage_driver.c:1734 #: src/storage/storage_driver.c:2025 src/storage/storage_driver.c:2092 #: src/storage/storage_driver.c:2170 src/storage/storage_driver.c:2226 #: src/storage/storage_driver.c:2273 src/test/test_driver.c:4572 #: src/test/test_driver.c:4779 src/test/test_driver.c:4858 #: src/test/test_driver.c:4936 src/test/test_driver.c:4984 #: src/test/test_driver.c:5024 #, c-format msgid "no storage vol with matching name '%s'" msgstr "이름이 '%s'와 일치하는 저장소 볼륨이 없음" #: src/parallels/parallels_storage.c:869 src/test/test_driver.c:4615 #, c-format msgid "no storage vol with matching key '%s'" msgstr "키 '%s'와 일치하는 저장소 볼륨이 없음" #: src/parallels/parallels_storage.c:900 src/test/test_driver.c:4649 #, c-format msgid "no storage vol with matching path '%s'" msgstr "경로 '%s'와 일치하는 저장소 볼륨이 없습니다" #: src/parallels/parallels_storage.c:937 #: src/parallels/parallels_storage.c:1069 src/storage/storage_driver.c:1323 #: src/test/test_driver.c:4688 src/test/test_driver.c:4772 msgid "storage vol already exists" msgstr "저장소 볼륨이 이미 존재합니다" #: src/parallels/parallels_storage.c:946 #: src/parallels/parallels_storage.c:1085 src/test/test_driver.c:4696 #: src/test/test_driver.c:4788 #, c-format msgid "Not enough free space in pool for volume '%s'" msgstr "볼륨 '%s'에 대해 풀 안에 가용 공간이 충분하지 않습니다" #: src/parallels/parallels_storage.c:977 #, fuzzy msgid "Can't create file with volume description" msgstr "초기 설정 생성 오류" #: src/parallels/parallels_storage.c:1176 #, fuzzy, c-format msgid "Can't remove file '%s'" msgstr "'%s' 설정 파일을 제거할 수 없음" #: src/phyp/phyp_driver.c:426 #, fuzzy, c-format msgid "Cannot parse number from '%s'" msgstr "비디오 램 '%s'을 구문 분석할 수 없음" #: src/phyp/phyp_driver.c:457 src/phyp/phyp_driver.c:463 #, fuzzy msgid "Unable to write information to local file." msgstr "envv를 로그파일에 쓸 수 없음: %s" #: src/phyp/phyp_driver.c:469 src/phyp/phyp_driver.c:781 #, fuzzy, c-format msgid "Could not close %s" msgstr "파일 '%s'를 닫을 수 없음" #: src/phyp/phyp_driver.c:542 #, fuzzy, c-format msgid "Failed to read from %s" msgstr "'%s'에서 읽기 실패: %s " #: src/phyp/phyp_driver.c:837 #, fuzzy msgid "Unable to determine number of domains." msgstr "도메인 %s에 대한 장치를 거부할 수 없음" #: src/phyp/phyp_driver.c:1002 src/phyp/phyp_driver.c:1083 msgid "No authentication callback provided." msgstr "권한 설정 콜백이 제공되지 않았습니다." #: src/phyp/phyp_driver.c:1023 #, c-format msgid "Error while getting %s address info" msgstr "%s 주소 정보를 얻는 중 오류 발생" #: src/phyp/phyp_driver.c:1040 #, c-format msgid "Failed to connect to %s" msgstr "%s에 연결하는 데 실패" #: src/phyp/phyp_driver.c:1060 msgid "Failure establishing SSH session." msgstr "SSH 세션 설정 중 실패" #: src/phyp/phyp_driver.c:1102 msgid "Authentication failed" msgstr "인증이 실패했습니다" #: src/phyp/phyp_driver.c:1157 msgid "Missing server name in phyp:// URI" msgstr "phyp:// URI에 서버 이름이 빠짐" #: src/phyp/phyp_driver.c:1199 msgid "Error parsing 'path'. Invalid characters." msgstr "'path' 구문 분석 올. 잘못된 문자." #: src/phyp/phyp_driver.c:1206 msgid "Error while opening SSH session." msgstr "SSH 세션을 여는 중 오류 발생" #: src/phyp/phyp_driver.c:1587 src/phyp/phyp_driver.c:1632 #: src/phyp/phyp_driver.c:1810 #, fuzzy msgid "Unable to get VIOS profile name." msgstr "cpu shares tunable을 얻을 수 없음" #: src/phyp/phyp_driver.c:1627 src/phyp/phyp_driver.c:1775 #, fuzzy msgid "Unable to get VIOS name" msgstr "호스트명 보기 실패" #: src/phyp/phyp_driver.c:1637 #, fuzzy msgid "Unable to get free slot number" msgstr "슬롯 번호 '%s'를 구문 분석할 수 없음" #: src/phyp/phyp_driver.c:1785 src/phyp/phyp_driver.c:1789 #, fuzzy msgid "Unable to create new virtual adapter" msgstr "파이프를 생성할 수 없" #: src/phyp/phyp_driver.c:1869 msgid "" "Possibly you don't have IBM Tools installed in your LPAR.Contact your " "support to enable this feature." msgstr "" #: src/phyp/phyp_driver.c:2000 #, fuzzy, c-format msgid "Unable to create Volume: %s" msgstr "%s에 대한 cgroup을 생성할 수 없음" #: src/phyp/phyp_driver.c:2052 src/phyp/phyp_driver.c:2305 #: src/phyp/phyp_driver.c:2755 #, fuzzy msgid "Unable to determine storage pool's name." msgstr "호스트 이름을 결정하는 데 실패" #: src/phyp/phyp_driver.c:2057 src/phyp/phyp_driver.c:2760 #, fuzzy msgid "Unable to determine storage pool's uuid." msgstr "원래의 VLAN을 결정할 수 없음" #: src/phyp/phyp_driver.c:2063 src/phyp/phyp_driver.c:2766 #, fuzzy msgid "Unable to determine storage pools's size." msgstr "원래의 VLAN을 결정할 수 없음" #: src/phyp/phyp_driver.c:2076 src/phyp/phyp_driver.c:2779 #, fuzzy msgid "Unable to determine storage pools's source adapter." msgstr "저장 풀(pool) 소스 아답터 이름이 빠짐" #: src/phyp/phyp_driver.c:2081 #, fuzzy msgid "Error parsing volume XML." msgstr "기존 볼륨을 복제" #: src/phyp/phyp_driver.c:2087 #, fuzzy msgid "StoragePool name already exists." msgstr "저장소 풀이 이미 존재합니다" #: src/phyp/phyp_driver.c:2096 msgid "Key must be empty, Power Hypervisor will create one for you." msgstr "" #: src/phyp/phyp_driver.c:2101 msgid "Capacity cannot be empty." msgstr "" #: src/phyp/phyp_driver.c:2276 #, fuzzy msgid "Unable to determine storage sp's name." msgstr "호스트 이름을 결정하는 데 실패" #: src/phyp/phyp_driver.c:2281 #, fuzzy msgid "Unable to determine storage sp's uuid." msgstr "uuid 생성 불가능" #: src/phyp/phyp_driver.c:2286 #, fuzzy msgid "Unable to determine storage sps's size." msgstr "원래의 VLAN을 결정할 수 없음" #: src/phyp/phyp_driver.c:2298 #, fuzzy msgid "Unable to determine storage sps's source adapter." msgstr "저장 풀(pool) 소스 아답터 이름이 빠짐" #: src/phyp/phyp_driver.c:2504 #, fuzzy, c-format msgid "Unable to destroy Storage Pool: %s" msgstr "%s에 대한 cgroup을 생성할 수 없음" #: src/phyp/phyp_driver.c:2543 #, fuzzy, c-format msgid "Unable to create Storage Pool: %s" msgstr "%s에 대한 cgroup을 생성할 수 없음" #: src/phyp/phyp_driver.c:3356 #, fuzzy msgid "Unable to determine domain's name." msgstr "호스트 이름을 결정하는 데 실패" #: src/phyp/phyp_driver.c:3361 #, fuzzy msgid "Unable to generate random uuid." msgstr "uuid 생성 불가능" #: src/phyp/phyp_driver.c:3367 #, fuzzy msgid "Unable to determine domain's max memory." msgstr "호스트 이름을 결정하는 데 실패" #: src/phyp/phyp_driver.c:3373 #, fuzzy msgid "Unable to determine domain's memory." msgstr "호스트 이름을 결정하는 데 실패" #: src/phyp/phyp_driver.c:3379 #, fuzzy msgid "Unable to determine domain's CPU." msgstr "원래의 VLAN을 결정할 수 없음" #: src/phyp/phyp_driver.c:3582 msgid "Field on the domain XML file is missing or has invalid value." msgstr "" #: src/phyp/phyp_driver.c:3589 msgid "" "Field on the domain XML file is missing or has invalid value." msgstr "" #: src/phyp/phyp_driver.c:3596 msgid "Domain XML must contain at least one element." msgstr "" #: src/phyp/phyp_driver.c:3602 msgid "Field under on the domain XML file is missing." msgstr "" #: src/phyp/phyp_driver.c:3618 #, fuzzy, c-format msgid "Unable to create LPAR. Reason: '%s'" msgstr "%s에 대한 cgroup을 생성할 수 없음" #: src/phyp/phyp_driver.c:3623 #, fuzzy msgid "Unable to add LPAR to the table" msgstr "연결 해시 테이블에 비밀 추가 실패" #: src/phyp/phyp_driver.c:3726 msgid "You are trying to set a number of CPUs bigger than the max possible." msgstr "" #: src/phyp/phyp_driver.c:3750 msgid "" "Possibly you don't have IBM Tools installed in your LPAR. Contact your " "support to enable this feature." msgstr "" #: src/qemu/qemu_agent.c:189 src/qemu/qemu_monitor.c:267 msgid "failed to create socket" msgstr "소켓 생성 실패" #: src/qemu/qemu_agent.c:195 src/qemu/qemu_monitor.c:743 msgid "Unable to put monitor into non-blocking mode" msgstr "모니터를 비-블로킹 모드로 설정할 수 없음" #: src/qemu/qemu_agent.c:202 src/qemu/qemu_agent.c:268 #: src/qemu/qemu_monitor.c:738 msgid "Unable to set monitor close-on-exec flag" msgstr "모니터의 close-on-exec 플래그를 설정할 수 없음" #: src/qemu/qemu_agent.c:211 #, fuzzy, c-format msgid "Agent path %s too big for destination" msgstr "소켓 경로 %s가 목적지에 대해 너무 큼" #: src/qemu/qemu_agent.c:237 src/qemu/qemu_monitor.c:293 msgid "failed to connect to monitor socket" msgstr "모니터 소켓 연결 실패" #: src/qemu/qemu_agent.c:244 src/qemu/qemu_monitor.c:300 msgid "monitor socket did not show up." msgstr "모이터 소켓이 올라오지 않았습니다" #: src/qemu/qemu_agent.c:262 src/qemu/qemu_monitor.c:318 #, c-format msgid "Unable to open monitor path %s" msgstr "모니터 경로 %s를 열 수 없음" #: src/qemu/qemu_agent.c:324 src/qemu/qemu_monitor_json.c:151 #, c-format msgid "Parsed JSON reply '%s' isn't an object" msgstr "" #: src/qemu/qemu_agent.c:355 src/qemu/qemu_monitor_json.c:172 #, fuzzy, c-format msgid "Unexpected JSON reply '%s'" msgstr "예상치 못한 CPU 특징 정책 %d" #: src/qemu/qemu_agent.c:359 src/qemu/qemu_monitor_json.c:176 #, fuzzy, c-format msgid "Unknown JSON reply '%s'" msgstr "알려지지 않은 유형 '%s'" #: src/qemu/qemu_agent.c:424 #, c-format msgid "Process %zu %p %p [[[%s]]][[[%s]]]" msgstr "" #: src/qemu/qemu_agent.c:471 #, fuzzy msgid "Cannot check socket connection status" msgstr "주소 %d를 해석할 수 없습니다: %s" #: src/qemu/qemu_agent.c:477 #, fuzzy msgid "Cannot connect to agent socket" msgstr "넷링크 소켓에 송신할 수 없습니다" #: src/qemu/qemu_agent.c:507 src/qemu/qemu_monitor.c:471 #, fuzzy msgid "Unable to write to monitor" msgstr "파이프에 수 없음" #: src/qemu/qemu_agent.c:547 src/qemu/qemu_monitor.c:511 #, fuzzy msgid "Unable to read from monitor" msgstr "Xen 데몬에서 읽기 실패" #: src/qemu/qemu_agent.c:602 src/qemu/qemu_monitor.c:567 #, fuzzy, c-format msgid "event from unexpected fd %d!=%d / watch %d!=%d" msgstr "예기치 못한 pid %d != %d" #: src/qemu/qemu_agent.c:642 src/qemu/qemu_monitor.c:602 msgid "End of file from monitor" msgstr "" #: src/qemu/qemu_agent.c:650 src/qemu/qemu_monitor.c:610 msgid "Invalid file descriptor while waiting for monitor" msgstr "" #: src/qemu/qemu_agent.c:656 src/qemu/qemu_monitor.c:616 #, fuzzy, c-format msgid "Unhandled event %d for monitor fd %d" msgstr "처리할 수 없는 fd 이벤트 %d가 모니터 fd %d에 대해 발생" #: src/qemu/qemu_agent.c:670 src/qemu/qemu_monitor.c:630 #, fuzzy msgid "Error while processing monitor IO" msgstr "드라이버를 다시 불러오는 중 오류가 발생했습니다" #: src/qemu/qemu_agent.c:727 src/qemu/qemu_monitor.c:688 msgid "EOF notify callback must be supplied" msgstr "EOF 통지 콜백을 지정해야만 합니다" #: src/qemu/qemu_agent.c:745 src/qemu/qemu_monitor.c:706 msgid "cannot initialize monitor condition" msgstr "모니터 조건을 초기화할 수 없음" #: src/qemu/qemu_agent.c:767 src/qemu/qemu_monitor.c:729 #, c-format msgid "unable to handle monitor type: %s" msgstr "모니터 유형을 처리할 수 없음: %s" #: src/qemu/qemu_agent.c:786 src/qemu/qemu_monitor.c:756 msgid "unable to register monitor events" msgstr "모니터 이벤트를 등록할 수 없음" #: src/qemu/qemu_agent.c:888 #, fuzzy msgid "Guest agent not available for now" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/qemu/qemu_agent.c:892 src/qemu/qemu_monitor.c:857 #, fuzzy msgid "Unable to wait on monitor condition" msgstr "조건을 기다리는 데 실패" #: src/qemu/qemu_agent.c:962 src/qemu/qemu_agent.c:1033 #: src/qemu/qemu_monitor_json.c:268 #, fuzzy msgid "Missing monitor reply object" msgstr "모니터 명령 '%s'를 보낼 수 없음" #: src/qemu/qemu_agent.c:969 #, fuzzy msgid "Malformed return value" msgstr "잘못된 형식의 볼륨 확장 크기 값" #: src/qemu/qemu_agent.c:976 #, c-format msgid "Guest agent returned ID: %llu instead of %llu" msgstr "" #: src/qemu/qemu_agent.c:1132 src/qemu/qemu_agent.c:1150 #: src/qemu/qemu_monitor_json.c:341 src/qemu/qemu_monitor_json.c:359 #, c-format msgid "unable to execute QEMU command '%s'" msgstr "QEMU 명령 '%s'를 실행할 수 없음" #: src/qemu/qemu_agent.c:1136 src/qemu/qemu_monitor_json.c:345 #, c-format msgid "unable to execute QEMU command '%s': %s" msgstr "QEMU 명령 '%s'를 실행할 수 없음 : %s" #: src/qemu/qemu_agent.c:1182 src/qemu/qemu_monitor_json.c:419 #, c-format msgid "argument key '%s' is too short, missing type prefix" msgstr "인자 키 '%s'가 너무 짧습니다. 접두사가 빠졌습니다" #: src/qemu/qemu_agent.c:1236 src/qemu/qemu_monitor_json.c:482 #, c-format msgid "unsupported data type '%c' for arg '%s'" msgstr "지원하지 않는 데이터 타입 '%c'가 인자 '%s'에 대해 사용됨" #: src/qemu/qemu_agent.c:1338 src/qemu/qemu_agent.c:1376 #, fuzzy msgid "malformed return value" msgstr "잘못된 형식의 볼륨 확장 크기 값" #: src/qemu/qemu_bridge_filter.c:43 #, c-format msgid "failed to add ebtables rule to set default policy to drop on '%s'" msgstr "" "'%s'에 떨어뜨리기 위한 기본 정책을 설정하는 규칙을 ebtables에 추가하는 데 실" "패" #: src/qemu/qemu_bridge_filter.c:59 #, c-format msgid "cannot filter mac addresses on bridge '%s'" msgstr "브리지 '%s'상의 mac 주소를 팔터링할 수 없음" #: src/qemu/qemu_bridge_filter.c:79 src/qemu/qemu_bridge_filter.c:100 #, c-format msgid "failed to add ebtables rule to allow routing to '%s'" msgstr "'%s'으로의 라우팅을 허용하는 규칙을 ebtables에 추가하는 데 실패" #: src/qemu/qemu_capabilities.c:318 src/qemu/qemu_capabilities.c:1528 #: src/qemu/qemu_capabilities.c:1616 #, c-format msgid "Cannot find QEMU binary %s" msgstr "QEMU 바이너리 %s를 찾을 수 없음" #: src/qemu/qemu_capabilities.c:1239 msgid "this qemu binary requires libvirt to be compiled with yajl" msgstr "" #: src/qemu/qemu_capabilities.c:1376 #, fuzzy, c-format msgid "cannot parse %s version number in '%.*s'" msgstr "버전 번호 %s를 '%s'에서 구문 분석할 수 없음" #: src/qemu/qemu_capabilities.c:1610 #, fuzzy, c-format msgid "Cannot find suitable emulator for %s" msgstr "주어진 데이터에 들어맞는 CPU 모델을 찾을 수 없음" #: src/qemu/qemu_cgroup.c:81 #, fuzzy, c-format msgid "Unable to allow access for disk path %s" msgstr "장치 %s를 %s에 대해 허용할 수 없음" #: src/qemu/qemu_cgroup.c:123 #, fuzzy, c-format msgid "Unable to deny access for disk path %s" msgstr "장치 %s를 %s에 대해 허용할 수 없음" #: src/qemu/qemu_cgroup.c:166 src/qemu/qemu_migration.c:3228 #, c-format msgid "Unable to allow device %s for %s" msgstr "장치 %s를 %s에 대해 허용할 수 없음" #: src/qemu/qemu_cgroup.c:188 #, fuzzy, c-format msgid "Unable to allow device %s" msgstr "%s 장치를 허용할 수 없음" #: src/qemu/qemu_cgroup.c:214 #, c-format msgid "Unable to create cgroup for %s" msgstr "%s에 대한 cgroup을 생성할 수 없음" #: src/qemu/qemu_cgroup.c:230 #, c-format msgid "Unable to deny all devices for %s" msgstr "%s에 대해 모든 장치를 거부할 수 없음" #: src/qemu/qemu_cgroup.c:245 msgid "unable to allow /dev/pts/ devices" msgstr "/dev/pts/ 장치를 허용할 수 없음" #: src/qemu/qemu_cgroup.c:260 msgid "unable to allow /dev/snd/ devices" msgstr "/dev/snd/ 장치를 허용할 수 없음" #: src/qemu/qemu_cgroup.c:272 #, c-format msgid "unable to allow device %s" msgstr "%s 장치를 허용할 수 없음" #: src/qemu/qemu_cgroup.c:308 #, fuzzy, c-format msgid "Unable to set io weight for domain %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/qemu/qemu_cgroup.c:314 src/qemu/qemu_cgroup.c:337 msgid "Block I/O tuning is not available on this host" msgstr "" #: src/qemu/qemu_cgroup.c:329 #, fuzzy, c-format msgid "Unable to set io device weight for domain %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/qemu/qemu_cgroup.c:387 #, fuzzy msgid "Memory cgroup is not available on this host" msgstr "이 플랫폼에 사용 가능한 NUMA 메모리 정보가 없음" #: src/qemu/qemu_cgroup.c:403 #, fuzzy msgid "CPU tuning is not available on this host" msgstr "이 플랫폼에 사용 가능한 NUMA 메모리 정보가 없음" #: src/qemu/qemu_cgroup.c:421 #, fuzzy msgid "failed to convert memory nodemask" msgstr "도메인에 대한 메모리 설정 실패" #: src/qemu/qemu_cgroup.c:429 #, fuzzy, c-format msgid "Unable to set cpuset.mems for domain %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/qemu/qemu_cgroup.c:520 #, fuzzy msgid "failed to convert cpu mask" msgstr "도메인에 대한 메모리 설정 실패" #: src/qemu/qemu_cgroup.c:529 #, fuzzy msgid "Unable to set cpuset.cpus" msgstr "기능 전환 실패" #: src/qemu/qemu_cgroup.c:553 src/qemu/qemu_cgroup.c:648 msgid "cgroup cpu is required for scheduler tuning" msgstr "" #: src/qemu/qemu_cgroup.c:567 src/qemu/qemu_cgroup.c:658 #: src/qemu/qemu_cgroup.c:728 src/qemu/qemu_driver.c:5725 #: src/qemu/qemu_driver.c:5954 src/qemu/qemu_driver.c:10878 #: src/qemu/qemu_hotplug.c:1089 src/qemu/qemu_hotplug.c:1672 #: src/qemu/qemu_hotplug.c:1776 src/qemu/qemu_migration.c:3216 #, fuzzy, c-format msgid "Unable to find cgroup for %s" msgstr "%s에 대한 cgroup을 찾을 수 없음\n" #: src/qemu/qemu_cgroup.c:585 #, fuzzy, c-format msgid "Unable to create vcpu cgroup for %s(vcpu: %d)" msgstr "%s에 대한 cgroup을 생성할 수 없음" #: src/qemu/qemu_cgroup.c:595 #, fuzzy, c-format msgid "unable to add vcpu %d task %d to cgroup" msgstr "도메인 %s 작업 %d를 cgroup에 추가할 수 없음" #: src/qemu/qemu_cgroup.c:666 #, fuzzy, c-format msgid "Unable to create emulator cgroup for %s" msgstr "%s에 대한 cgroup을 생성할 수 없음" #: src/qemu/qemu_cgroup.c:677 #, c-format msgid "" "Unable to move tasks from domain cgroup to emulator cgroup in controller %d " "for %s" msgstr "" #: src/qemu/qemu_cgroup.c:751 #, c-format msgid "unable to find cgroup for domain %s" msgstr "도메인 %s에 대한 cgroup을 찾을 수 없음" #: src/qemu/qemu_cgroup.c:759 #, c-format msgid "unable to add domain %s task %d to cgroup" msgstr "도메인 %s 작업 %d를 cgroup에 추가할 수 없음" #: src/qemu/qemu_command.c:236 #, c-format msgid "Network type %d is not supported" msgstr "네트워크 유형 %d를 지원하지 않습니다" #: src/qemu/qemu_command.c:273 #, fuzzy, c-format msgid "failed to add ebtables rule to allow MAC address on '%s'" msgstr "'%s'상의 MAC 주소를 허용하기 위한 규칙을 ebtables에 추가하는 데 실패" #: src/qemu/qemu_command.c:323 #, fuzzy msgid "vhost-net is not supported with this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:334 #, fuzzy msgid "vhost-net is only supported for virtio network interfaces" msgstr "이더넷 인터페이스에 대해 스크립트 실행이 지원되지 않습니다" #: src/qemu/qemu_command.c:350 msgid "vhost-net was requested for an interface, but is unavailable" msgstr "" #: src/qemu/qemu_command.c:431 #, c-format msgid "cannot convert disk '%s' to bus/device index" msgstr "디스크 '%s'를 버스/장치 인덱스로 변환할 수 없음" #: src/qemu/qemu_command.c:460 #, c-format msgid "Unsupported disk name mapping for bus '%s'" msgstr "버스 '%s'에 대해 지원되지 않는 디스크 이름 매핑" #: src/qemu/qemu_command.c:485 #, fuzzy msgid "This QEMU doesn't support lsi scsi controller" msgstr "ps2 버스는 %s 입력 장치를 지원하지 않음 " #: src/qemu/qemu_command.c:493 #, fuzzy msgid "This QEMU doesn't support virtio scsi controller" msgstr "ps2 버스는 %s 입력 장치를 지원하지 않음 " #: src/qemu/qemu_command.c:503 src/qemu/qemu_command.c:2858 #, fuzzy, c-format msgid "Unsupported controller model: %s" msgstr "지원되지 않는 네트워크 유형 %d" #: src/qemu/qemu_command.c:515 #, fuzzy msgid "Unable to determine model for scsi controller" msgstr "호스트 이름을 결정하는 데 실패" #: src/qemu/qemu_command.c:602 msgid "Unable to determine device index for network device" msgstr "네트워크 장치에 대해 장치 인텍스를 결정할 수 없음" #: src/qemu/qemu_command.c:629 #, fuzzy msgid "Unable to determine device index for hostdev device" msgstr "hostdevwork 장치에 대해 장치 인덱스를 결정할 수 없음" #: src/qemu/qemu_command.c:656 #, fuzzy msgid "Unable to determine device index for redirected device" msgstr "네트워크 장치에 대해 장치 인텍스를 결정할 수 없음" #: src/qemu/qemu_command.c:882 #, fuzzy, c-format msgid "spapr-vio address %#llx already in use" msgstr "브리지 이름 '%s'가 이미 사용중." #: src/qemu/qemu_command.c:976 msgid "Only PCI domain 0 and bus 0 are available" msgstr "PIC 도메인 0과 버스 0만이 사용 가능합니다" #: src/qemu/qemu_command.c:1018 #, c-format msgid "" "Attempted double use of PCI Address '%s' (may need \"multifunction='on'\" " "for device on function 0)" msgstr "" #: src/qemu/qemu_command.c:1023 #, c-format msgid "Attempted double use of PCI Address '%s'" msgstr "" #: src/qemu/qemu_command.c:1047 #, c-format msgid "" "Attempted double use of PCI Address '%s'(need \"multifunction='off'\" for " "device on function 0)" msgstr "" #: src/qemu/qemu_command.c:1204 #, c-format msgid "unable to reserve PCI address %s" msgstr "PIC 주소 %s를 예약할 수 없음" #: src/qemu/qemu_command.c:1265 msgid "Only PCI device addresses with function=0 are supported" msgstr "function=0인 PCI 장치 주소만 지원됩니다" #: src/qemu/qemu_command.c:1382 msgid "No more available PCI addresses" msgstr "더 이상 사용 가능한PIC 주소가 없음" #: src/qemu/qemu_command.c:1473 msgid "Primary IDE controller must have PCI address 0:0:1.1" msgstr "기본 IDE 컨트롤러의 PIC 주소는 0.0:1.1이어야만 합니다" #: src/qemu/qemu_command.c:1496 #, fuzzy msgid "PIIX3 USB controller must have PCI address 0:0:1.2" msgstr "기본 IDE 컨트롤러의 PIC 주소는 0.0:1.1이어야만 합니다" #: src/qemu/qemu_command.c:1531 msgid "Primary video card must have PCI address 0:0:2.0" msgstr "기본 비디오 카드는 PIC 주소가 0:0:2.0이어야 합니다" #: src/qemu/qemu_command.c:1682 #, fuzzy msgid "virtio only support device address type 'PCI'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/qemu/qemu_command.c:1764 msgid "Only PCI device addresses with domain=0 are supported" msgstr "domain=0인 PCI 장치 주소만 지원됩니다" #: src/qemu/qemu_command.c:1769 msgid "Only PCI device addresses with bus=0 are supported" msgstr "bus=0인 PCI 장치 주소만 지원됩니다" #: src/qemu/qemu_command.c:1775 msgid "The function of PCI device addresses must less than 8" msgstr "" #: src/qemu/qemu_command.c:1782 #, fuzzy msgid "" "Only PCI device addresses with function=0 are supported with this QEMU binary" msgstr "function=0인 PCI 장치 주소만 지원됩니다" #: src/qemu/qemu_command.c:1788 #, fuzzy msgid "'multifunction=on' is not supported with this QEMU binary" msgstr "본 QEMU 바이너리에서는 STDIO 이전을 지원하지 않습니다" #: src/qemu/qemu_command.c:1831 msgid "rombar and romfile are supported only for PCI devices" msgstr "" #: src/qemu/qemu_command.c:1836 #, fuzzy msgid "rombar and romfile not supported in this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:1875 #, c-format msgid "driver serial '%s' contains unsafe characters" msgstr "드라이브 시리얼 '%s'에 안전하지 않은 문자가 포함되어 있습니다" #: src/qemu/qemu_command.c:1917 #, fuzzy, c-format msgid "could not get the value of the secret for username %s" msgstr "%s상의 매체를 꺼내기할 수 없음" #: src/qemu/qemu_command.c:1933 #, c-format msgid "rbd username '%s' specified but secret not found" msgstr "" #: src/qemu/qemu_command.c:2087 src/qemu/qemu_command.c:2451 #: src/qemu/qemu_command.c:5087 src/uml/uml_conf.c:438 #, c-format msgid "unsupported disk type '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/qemu/qemu_command.c:2095 msgid "unexpected address type for scsi disk" msgstr "SCSI 디스크에 대해 예기치 못한 주소 유형" #: src/qemu/qemu_command.c:2104 msgid "SCSI controller only supports 1 bus" msgstr "SCSI 컨트롤러는 1 버스만을 지원합니다" #: src/qemu/qemu_command.c:2114 msgid "unexpected address type for ide disk" msgstr "IDE 디스크에 대해 예기치 못한 주소 유형" #: src/qemu/qemu_command.c:2120 src/qemu/qemu_command.c:2136 #, c-format msgid "Only 1 %s controller is supported" msgstr "오직 1 %s 컨트롤러만이 지원됩니다" #: src/qemu/qemu_command.c:2130 msgid "unexpected address type for fdc disk" msgstr "fdc 디스크에 대해 예기치 못한 주소 유형" #: src/qemu/qemu_command.c:2142 #, c-format msgid "Only 1 %s bus is supported" msgstr "오직 1 %s 버스만이 지원됩니다" #: src/qemu/qemu_command.c:2147 msgid "target must be 0 for controller fdc" msgstr "" #: src/qemu/qemu_command.c:2159 #, fuzzy msgid "unexpected address type for s390-virtio disk" msgstr "SCSI 디스크에 대해 예기치 못한 주소 유형" #: src/qemu/qemu_command.c:2182 src/qemu/qemu_command.c:5097 #, c-format msgid "unsupported disk driver type for '%s'" msgstr "'%s'에 대해 예기치 못한 디스크 드라이버 유형" #: src/qemu/qemu_command.c:2188 src/qemu/qemu_command.c:5103 msgid "cannot create virtual FAT disks in read-write mode" msgstr "가상 FAT 디스크를 읽기-쓰기 모드로 생성할 수 없음" #: src/qemu/qemu_command.c:2201 src/qemu/qemu_command.c:5119 msgid "NBD accepts only one host" msgstr "" #: src/qemu/qemu_command.c:2229 src/qemu/qemu_command.c:5056 msgid "tray status 'open' is invalid for block type disk" msgstr "" #: src/qemu/qemu_command.c:2277 src/xenxs/xen_sxpr.c:1874 #: src/xenxs/xen_xm.c:1250 #, fuzzy msgid "transient disks not supported yet" msgstr "cpu 친밀도(affinity)가 지원되지 않습니다" #: src/qemu/qemu_command.c:2315 #, fuzzy msgid "disk cache mode 'directsync' is not supported by this QEMU" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:2321 #, fuzzy msgid "disk cache mode 'unsafe' is not supported by this QEMU" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:2340 #, fuzzy msgid "copy_on_read is not supported by this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:2376 #, fuzzy msgid "disk aio mode not supported with this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:2391 src/qemu/qemu_driver.c:12865 #, fuzzy msgid "block I/O throttling not supported with this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:2462 #, fuzzy, c-format msgid "disk device='lun' is not supported for bus='%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/qemu/qemu_command.c:2468 #, fuzzy, c-format msgid "disk device='lun' is not supported for type='%s'" msgstr "지원하지 않는 모니터 유형 '%s'" #: src/qemu/qemu_command.c:2474 #, fuzzy msgid "disk device='lun' is not supported by this QEMU" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:2483 src/qemu/qemu_command.c:2587 #, fuzzy msgid "target must be 0 for ide controller" msgstr "장치 주소 유형이 지정되지 않았습니다" #: src/qemu/qemu_command.c:2504 msgid "This QEMU doesn't support scsi-block for lun passthrough" msgstr "" #: src/qemu/qemu_command.c:2519 msgid "target must be 0 for controller model 'lsilogic'" msgstr "" #: src/qemu/qemu_command.c:2545 #, fuzzy msgid "This QEMU doesn't support target greater than 7" msgstr "ps2 버스는 %s 입력 장치를 지원하지 않음 " #: src/qemu/qemu_command.c:2553 msgid "This QEMU only supports both bus and unit equal to 0" msgstr "" #: src/qemu/qemu_command.c:2582 msgid "bus must be 0 for ide controller" msgstr "" #: src/qemu/qemu_command.c:2633 #, c-format msgid "unsupported disk bus '%s' with device setup" msgstr "장치 설정과 함께 지원하지 않는 디스크 버스 '%s'" #: src/qemu/qemu_command.c:2663 #, fuzzy msgid "only supports mount filesystem type" msgstr "오직 하나의 파일시스템만 지원됨" #: src/qemu/qemu_command.c:2669 #, fuzzy msgid "Filesystem driver type not supported" msgstr "지원되지 않는 TCP 클라이언트 네트워킹 유형" #: src/qemu/qemu_command.c:2688 #, fuzzy msgid "only supports passthrough accessmode" msgstr "오직 하나의 파일시스템만 지원됨" #: src/qemu/qemu_command.c:2698 #, fuzzy msgid "filesystem writeout not supported" msgstr "지원되지 않는 TCP 클라이언트 네트워킹 유형" #: src/qemu/qemu_command.c:2711 #, fuzzy msgid "readonly filesystem is not supported by this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:2738 #, fuzzy msgid "can only passthrough directories" msgstr "로그 디렉터리 %s를 생성할 수 없음" #: src/qemu/qemu_command.c:2813 src/qemu/qemu_command.c:3300 #, fuzzy, c-format msgid "%s not supported in this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:2906 #, fuzzy, c-format msgid "Unknown controller type: %s" msgstr "알 수 없는 컨트롤러 유형 '%s'" #: src/qemu/qemu_command.c:2993 msgid "unrecognized virtio-net-pci 'tx' option" msgstr "" #: src/qemu/qemu_command.c:2998 #, fuzzy msgid "virtio-net-pci 'tx' option not supported in this QEMU binary" msgstr "본 QEMU 바이너리에서는 TCP 이전을 지원하지 않습니다" #: src/qemu/qemu_command.c:3162 src/qemu/qemu_command.c:6206 msgid "missing watchdog model" msgstr "와치독 모델이 빠짐" #: src/qemu/qemu_command.c:3242 src/qemu/qemu_command.c:6168 msgid "invalid sound model" msgstr "잘못된 사운드 모델" #: src/qemu/qemu_command.c:3323 #, fuzzy msgid "invalid video model" msgstr "잘못된 사운드 모델" #: src/qemu/qemu_command.c:3332 src/qemu/qemu_command.c:6032 #, c-format msgid "value for 'vram' must be less than '%u'" msgstr "" #: src/qemu/qemu_command.c:3375 #, fuzzy, c-format msgid "Failed opening %s" msgstr "'%s' 열기 실패" #: src/qemu/qemu_command.c:3439 #, fuzzy, c-format msgid "Redirection bus %s is not supported by QEMU" msgstr "비디오 유형 %s는 QEMU가 지원하지 않습니다" #: src/qemu/qemu_command.c:3446 #, fuzzy msgid "USB redirection is not supported by this version of QEMU" msgstr "이 버전의 qemu에서는 PIC 장치 할당을 지원하지 않습니다" #: src/qemu/qemu_command.c:3479 src/qemu/qemu_command.c:3549 msgid "USB host device is missing bus/device information" msgstr "USB 호스트 장치에 버스/장치 정보가 빠졌습니다" #: src/qemu/qemu_command.c:3512 #, fuzzy, c-format msgid "hub type %s not supported" msgstr "hostdev subsys 유형 '%s'가 지원되지 않음" #: src/qemu/qemu_command.c:3519 #, fuzzy msgid "usb-hub not supported by QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:3648 #, fuzzy msgid "spicevmc not supported in this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:3657 #, fuzzy, c-format msgid "unsupported chardev '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/qemu/qemu_command.c:3785 #, fuzzy msgid "Cannot use virtio serial for parallel/serial devices" msgstr "병렬 장치를 추출할 수 없음" #: src/qemu/qemu_command.c:3796 msgid "virtio serial device has invalid address type" msgstr "virtio 직렬 장치가 잘못된 주소 유형을 가졌습니다" #: src/qemu/qemu_command.c:3813 #, fuzzy, c-format msgid "Unsupported spicevmc target name '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/qemu/qemu_command.c:3945 #, fuzzy, c-format msgid "unsupported clock basis '%s'" msgstr "지원하지 않는 클럭 오프셋 '%s'" #: src/qemu/qemu_command.c:3963 src/qemu/qemu_command.c:4656 #, c-format msgid "unsupported clock offset '%s'" msgstr "지원하지 않는 클럭 오프셋 '%s'" #: src/qemu/qemu_command.c:3977 #, fuzzy, c-format msgid "unsupported rtc timer track '%s'" msgstr "'%s'에 대해 예기치 못한 디스크 드라이버 유형" #: src/qemu/qemu_command.c:4001 #, fuzzy, c-format msgid "unsupported rtc timer tickpolicy '%s'" msgstr "지원하지 않는 프로토콜 패밀리 '%s'" #: src/qemu/qemu_command.c:4065 #, fuzzy msgid "CPU specification not supported by hypervisor" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/qemu/qemu_command.c:4082 #, fuzzy, c-format msgid "guest and host CPU are not compatible: %s" msgstr "게스트 CPU가 호스트 CPU와 호환가능하지 않습니다" #: src/qemu/qemu_command.c:4086 msgid "guest CPU is not compatible with host CPU" msgstr "게스트 CPU가 호스트 CPU와 호환가능하지 않습니다" #: src/qemu/qemu_command.c:4108 #, fuzzy, c-format msgid "CPU mode '%s' is not supported by QEMU binary" msgstr "CPU 모델 '%s'를 hypervisor가 지원하지 않습니다" #: src/qemu/qemu_command.c:4114 #, fuzzy, c-format msgid "CPU mode '%s' is only supported with kvm" msgstr "CPU 모델 '%s'를 hypervisor가 지원하지 않습니다" #: src/qemu/qemu_command.c:4241 #, fuzzy msgid "" "setting current vcpu count less than maximum is not supported with this QEMU " "binary" msgstr "본 QEMU 바이너리에서는 TCP 이전을 지원하지 않습니다" #: src/qemu/qemu_command.c:4382 #, fuzzy, c-format msgid "the QEMU binary %s does not support kqemu" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/qemu/qemu_command.c:4395 #, fuzzy, c-format msgid "the QEMU binary %s does not support kvm" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/qemu/qemu_command.c:4406 #, fuzzy, c-format msgid "the QEMU binary %s does not support %s" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/qemu/qemu_command.c:4472 msgid "hugetlbfs filesystem is not mounted" msgstr "hugetlbfs 파일시스템이 마운트되지 않았습니다" #: src/qemu/qemu_command.c:4477 msgid "hugepages are disabled by administrator config" msgstr "hugepages가 관리자 설정에 의해 해제되었습니다" #: src/qemu/qemu_command.c:4482 #, c-format msgid "hugepage backing not supported by '%s'" msgstr "hugepage 지원이 '%s'에 의해 지원되지 않음" #: src/qemu/qemu_command.c:4514 #, c-format msgid "qemu emulator '%s' does not support xen" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/qemu/qemu_command.c:4527 #, fuzzy, c-format msgid "the QEMU binary %s does not support smbios settings" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/qemu/qemu_command.c:4536 src/qemu/qemu_driver.c:1125 #, fuzzy msgid "Host SMBIOS information is not available" msgstr "cpu 정보가 배열이 아니었습니다" #: src/qemu/qemu_command.c:4545 #, c-format msgid "Domain '%s' sysinfo are not available" msgstr "" #: src/qemu/qemu_command.c:4591 #, fuzzy msgid "qemu does not support -device" msgstr "xen 버스는 %s 입력 장치를 지원하지 않음 " #: src/qemu/qemu_command.c:4596 #, fuzzy msgid "qemu does not support SGA" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/qemu/qemu_command.c:4601 msgid "need at least one serial port to use SGA" msgstr "" #: src/qemu/qemu_command.c:4672 #, fuzzy, c-format msgid "unsupported timer type (name) '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/qemu/qemu_command.c:4696 src/qemu/qemu_command.c:4707 #, fuzzy, c-format msgid "unsupported rtc tickpolicy '%s'" msgstr "지원하지 않는 프로토콜 패밀리 '%s'" #: src/qemu/qemu_command.c:4731 src/qemu/qemu_command.c:4740 #, fuzzy, c-format msgid "unsupported pit tickpolicy '%s'" msgstr "지원하지 않는 프로토콜 패밀리 '%s'" #: src/qemu/qemu_command.c:4762 #, fuzzy msgid "pit timer is not supported" msgstr "cpu 친밀도(affinity)가 지원되지 않습니다" #: src/qemu/qemu_command.c:4797 msgid "hypervisor lacks deviceboot feature" msgstr "" #: src/qemu/qemu_command.c:4863 src/qemu/qemu_driver.c:5717 #, c-format msgid "unsupported driver name '%s' for disk '%s'" msgstr "드라이버 이름 '%s'가 디스크 '%s'에 대해 지원되지 않음" #: src/qemu/qemu_command.c:4891 msgid "SATA is not supported with this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_command.c:4910 #, fuzzy msgid "Multiple legacy USB controllers are not supported" msgstr "cpu 친밀도(affinity)가 지원되지 않습니다" #: src/qemu/qemu_command.c:4967 src/qemu/qemu_command.c:5067 #, c-format msgid "unsupported usb disk type for '%s'" msgstr "'%s'에 대해 지원하지 않는 usb 디스크 유형" #: src/qemu/qemu_command.c:5191 #, fuzzy msgid "filesystem passthrough not supported by this QEMU" msgstr "비디오 유형 %s는 QEMU가 지원하지 않습니다" #: src/qemu/qemu_command.c:5267 #, c-format msgid "" "PCI device %04x:%02x:%02x.%x allocated from network %s is already in use by " "domain %s" msgstr "" #: src/qemu/qemu_command.c:5394 #, fuzzy msgid "this QEMU binary lacks multiple smartcard support" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/qemu/qemu_command.c:5405 src/qemu/qemu_command.c:5417 #, fuzzy msgid "this QEMU binary lacks smartcard host mode support" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/qemu/qemu_command.c:5427 #, fuzzy, c-format msgid "invalid certificate name: %s" msgstr "잘못된 인터페이스 이름 %s" #: src/qemu/qemu_command.c:5438 #, fuzzy, c-format msgid "invalid database name: %s" msgstr "잘못된 인터페이스 이름 %s" #: src/qemu/qemu_command.c:5453 #, fuzzy msgid "this QEMU binary lacks smartcard passthrough mode support" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/qemu/qemu_command.c:5566 msgid "guestfwd requires QEMU to support -chardev & -device" msgstr "guestfwd는 -chardev 와 -device 를 지원하기 위해 QEMU가 필요합니다" #: src/qemu/qemu_command.c:5594 src/qemu/qemu_command.c:5633 msgid "virtio channel requires QEMU to support -device" msgstr "virtio 채널은 -device를 지원하기 위해 QEMU가 필요합니다" #: src/qemu/qemu_command.c:5658 #, fuzzy, c-format msgid "unsupported console target type %s" msgstr "지원하지 않는 설정 유형 %s" #: src/qemu/qemu_command.c:5699 #, fuzzy msgid "only 1 graphics device is supported" msgstr "와치독 장치는 한개만 지원합니다" #: src/qemu/qemu_command.c:5738 src/qemu/qemu_command.c:5889 msgid "network-based listen not possible, network driver not present" msgstr "" #: src/qemu/qemu_command.c:5744 src/qemu/qemu_command.c:5895 #, c-format msgid "listen network '%s' had no usable address" msgstr "" #: src/qemu/qemu_command.c:5822 #, fuzzy, c-format msgid "sdl not supported by '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/qemu/qemu_command.c:5860 #, fuzzy msgid "spice graphics are not supported with this QEMU" msgstr "비디오 유형 %s는 QEMU가 지원하지 않습니다" #: src/qemu/qemu_command.c:5869 msgid "" "spice TLS port set in XML configuration, but TLS is disabled in qemu.conf" msgstr "" #: src/qemu/qemu_command.c:5958 msgid "" "spice secure channels set in XML configuration, but TLS is disabled in qemu." "conf" msgstr "" #: src/qemu/qemu_command.c:6000 #, fuzzy, c-format msgid "unsupported graphics type '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/qemu/qemu_command.c:6013 msgid "This QEMU does not support QXL graphics adapters" msgstr "" #: src/qemu/qemu_command.c:6020 #, c-format msgid "video type %s is not supported with QEMU" msgstr "비디오 유형 %s는 QEMU가 지원하지 않습니다" #: src/qemu/qemu_command.c:6066 #, fuzzy, c-format msgid "video type %s is not supported with this QEMU" msgstr "비디오 유형 %s는 QEMU가 지원하지 않습니다" #: src/qemu/qemu_command.c:6078 #, c-format msgid "video type %s is only valid as primary video card" msgstr "" #: src/qemu/qemu_command.c:6093 msgid "only one video card is currently supported" msgstr "현재는 오직 하나의 비디오 카드만을 지원합니다" #: src/qemu/qemu_command.c:6175 #, fuzzy msgid "this QEMU binary lacks hda support" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/qemu/qemu_command.c:6222 msgid "invalid watchdog action" msgstr "잘못된 와치독 동작" #: src/qemu/qemu_command.c:6263 msgid "booting from assigned devices is only supported for PCI devices" msgstr "" #: src/qemu/qemu_command.c:6268 #, fuzzy msgid "" "booting from assigned PCI devices is not supported with this version of qemu" msgstr "이 버전의 qemu에서는 PIC 장치 할당을 지원하지 않습니다" #: src/qemu/qemu_command.c:6325 src/qemu/qemu_monitor_text.c:1987 msgid "PCI device assignment is not supported by this version of qemu" msgstr "이 버전의 qemu에서는 PIC 장치 할당을 지원하지 않습니다" #: src/qemu/qemu_command.c:6339 msgid "TCP migration is not supported with this QEMU binary" msgstr "본 QEMU 바이너리에서는 TCP 이전을 지원하지 않습니다" #: src/qemu/qemu_command.c:6356 msgid "STDIO migration is not supported with this QEMU binary" msgstr "본 QEMU 바이너리에서는 STDIO 이전을 지원하지 않습니다" #: src/qemu/qemu_command.c:6363 #, fuzzy msgid "EXEC migration is not supported with this QEMU binary" msgstr "본 QEMU 바이너리에서는 TCP 이전을 지원하지 않습니다" #: src/qemu/qemu_command.c:6371 #, fuzzy msgid "FD migration is not supported with this QEMU binary" msgstr "본 QEMU 바이너리에서는 STDIO 이전을 지원하지 않습니다" #: src/qemu/qemu_command.c:6380 #, fuzzy msgid "UNIX migration is not supported with this QEMU binary" msgstr "본 QEMU 바이너리에서는 STDIO 이전을 지원하지 않습니다" #: src/qemu/qemu_command.c:6387 #, fuzzy msgid "unknown migration protocol" msgstr "알려지지 않은 프로토콜 '%s'" #: src/qemu/qemu_command.c:6402 #, fuzzy, c-format msgid "" "Memory balloon device type '%s' is not supported by this version of qemu" msgstr "이 버전의 qemu에서는 PIC 장치 할당을 지원하지 않습니다" #: src/qemu/qemu_command.c:6662 #, c-format msgid "malformed keyword arguments in '%s'" msgstr "'%s'에 잘못된 형식의 키워드 인자" #: src/qemu/qemu_command.c:6776 src/qemu/qemu_command.c:8020 #, fuzzy, c-format msgid "cannot parse nbd filename '%s'" msgstr "'%s'에서 vlan을 구문분석 할 수 없음" #: src/qemu/qemu_command.c:6835 src/qemu/qemu_command.c:8049 #, fuzzy, c-format msgid "cannot parse sheepdog filename '%s'" msgstr "비디오 램 '%s'을 구문 분석할 수 없음" #: src/qemu/qemu_command.c:6922 #, c-format msgid "cannot parse drive index '%s'" msgstr "드라이브 인덱스 '%s'를 구문분석 할 수 없음" #: src/qemu/qemu_command.c:6930 #, c-format msgid "cannot parse drive bus '%s'" msgstr "드라이브 버스 '%s'를 구문분석 할 수 없음" #: src/qemu/qemu_command.c:6938 #, c-format msgid "cannot parse drive unit '%s'" msgstr "드라이브 유니트 '%s'를 구문분석 할 수 없음" #: src/qemu/qemu_command.c:6947 #, fuzzy, c-format msgid "cannot parse io mode '%s'" msgstr "비디오 램 '%s'을 구문 분석할 수 없음" #: src/qemu/qemu_command.c:6955 #, fuzzy, c-format msgid "cannot parse cylinders value'%s'" msgstr "비디오 램 '%s'을 구문 분석할 수 없음" #: src/qemu/qemu_command.c:6964 #, fuzzy, c-format msgid "cannot parse heads value'%s'" msgstr "비디오 헤드 '%s'를 구문분석 할 수 없음" #: src/qemu/qemu_command.c:6973 #, fuzzy, c-format msgid "cannot parse sectors value'%s'" msgstr "메모리 수준 '%s'를 구문분석 할 수 없음" #: src/qemu/qemu_command.c:6984 #, fuzzy, c-format msgid "cannot parse translation value'%s'" msgstr "'%s'에서 vlan을 구문분석 할 수 없음" #: src/qemu/qemu_command.c:6997 #, c-format msgid "missing file parameter in drive '%s'" msgstr "드라이브 '%s'에 파일 매개변수가 빠짐" #: src/qemu/qemu_command.c:7010 #, c-format msgid "missing index/unit/bus parameter in drive '%s'" msgstr "드라이브 '%s'에 index/unit/bus 매개변수가 빠짐" #: src/qemu/qemu_command.c:7059 #, fuzzy, c-format msgid "invalid device name '%s'" msgstr "잘못된 플로피 장치 이름: %s" #: src/qemu/qemu_command.c:7095 #, c-format msgid "cannot parse NIC vlan in '%s'" msgstr "'%s'에서 NIC vlan을 구문 분석할 수 없음" #: src/qemu/qemu_command.c:7107 #, c-format msgid "cannot find NIC definition for vlan %d" msgstr "vlan %d에 대해 NIC 정의를 찾을 수 없음" #: src/qemu/qemu_command.c:7164 #, c-format msgid "cannot parse vlan in '%s'" msgstr "'%s'에서 vlan을 구문분석 할 수 없음" #: src/qemu/qemu_command.c:7194 #, c-format msgid "cannot parse NIC definition '%s'" msgstr "NIC 정의 '%s'를 구문분석할 수 없음" #: src/qemu/qemu_command.c:7242 #, fuzzy, c-format msgid "cannot parse sndbuf size in '%s'" msgstr "드라이브 인덱스 '%s'를 구문분석 할 수 없음" #: src/qemu/qemu_command.c:7281 #, c-format msgid "unknown PCI device syntax '%s'" msgstr "알려져 있지 않은 PCI 장치 문법 '%s'" #: src/qemu/qemu_command.c:7288 #, c-format msgid "cannot extract PCI device bus '%s'" msgstr "PCI 장치 버스 '%s'를 추출할 수 없음" #: src/qemu/qemu_command.c:7294 #, c-format msgid "cannot extract PCI device slot '%s'" msgstr "PCI 장치 슬롯 '%s'를 추출할 수 없음" #: src/qemu/qemu_command.c:7300 #, c-format msgid "cannot extract PCI device function '%s'" msgstr "PCI 장치 기능 '%s'를 추출할 수 없음" #: src/qemu/qemu_command.c:7334 #, c-format msgid "unknown USB device syntax '%s'" msgstr "알려져 있지 않은 USB 장치 문법 '%s'" #: src/qemu/qemu_command.c:7342 #, c-format msgid "cannot extract USB device vendor '%s'" msgstr "USB 장치 벤더'%s'를 추출할 수 없음" #: src/qemu/qemu_command.c:7348 #, c-format msgid "cannot extract USB device product '%s'" msgstr "USB 장치 제품 '%s'를 추출할 수 없음" #: src/qemu/qemu_command.c:7354 #, c-format msgid "cannot extract USB device bus '%s'" msgstr "USB 장치 버스 '%s'를 추출할 수 없음" #: src/qemu/qemu_command.c:7360 #, c-format msgid "cannot extract USB device address '%s'" msgstr "USB 장치 주소 '%s'를 추출할 수 없음" #: src/qemu/qemu_command.c:7465 #, c-format msgid "cannot find port number in character device %s" msgstr "문자 디바이스 %s에서 포트 번호를 찾을 수 없음" #: src/qemu/qemu_command.c:7505 #, c-format msgid "unknown character device syntax %s" msgstr "알려져 있지 않은 문자 장치 문법 %s" #: src/qemu/qemu_command.c:7617 msgid "conflicting occurrences of kvmclock feature" msgstr "" #: src/qemu/qemu_command.c:7667 #, c-format msgid "unknown CPU syntax '%s'" msgstr "알려져 있지 않은 CPU 문법 '%s'" #: src/qemu/qemu_command.c:7746 #, c-format msgid "cannot parse CPU topology '%s'" msgstr "CPU 토플로지 '%s'를 구문분석 할 수 없음" #: src/qemu/qemu_command.c:7787 msgid "no emulator path found" msgstr "에뮬레이터 경로를 찾을 수 없음" #: src/qemu/qemu_command.c:7800 #, fuzzy msgid "failed to generate uuid" msgstr "uuid 생성 불가능" #: src/qemu/qemu_command.c:7853 #, c-format msgid "missing value for %s argument" msgstr "%s 인자에 대해 빠진 값" #: src/qemu/qemu_command.c:7913 #, fuzzy, c-format msgid "missing VNC port number in '%s'" msgstr "드라이브 '%s'에 파일 매개변수가 빠짐" #: src/qemu/qemu_command.c:7920 #, c-format msgid "cannot parse VNC port '%s'" msgstr "VNC 포트 '%s'를 구문분석 할 수 없음" #: src/qemu/qemu_command.c:7947 #, c-format msgid "cannot parse memory level '%s'" msgstr "메모리 수준 '%s'를 구문분석 할 수 없음" #: src/qemu/qemu_command.c:7959 #, c-format msgid "cannot parse UUID '%s'" msgstr "UUID'%s'를 구문분석 할 수 없음" #: src/qemu/qemu_command.c:8329 #, c-format msgid "unknown video adapter type '%s'" msgstr "알려져 있지 않은 비디오 아답터 유형 '%s'" #: src/qemu/qemu_command.c:8402 msgid "CEPH_ARGS was set without an rbd disk" msgstr "" #: src/qemu/qemu_command.c:8409 #, fuzzy, c-format msgid "could not parse CEPH_ARGS '%s'" msgstr "VPS ID %s를 구문분석 할 수 없음" #: src/qemu/qemu_command.c:8444 #, c-format msgid "found no rbd hosts in CEPH_ARGS '%s'" msgstr "" #: src/qemu/qemu_command.c:8656 #, fuzzy, c-format msgid "Unable to resolve %s for pid %u" msgstr "%s를 열 수 없음" #: src/qemu/qemu_conf.c:120 msgid "unable to find hugetlbfs mountpoint" msgstr "hugetlbfs 마운트 지점을 찾을 수 없음" #: src/qemu/qemu_conf.c:208 #, fuzzy msgid "security_driver be a list of strings" msgstr "cgroup_device_acl은 문자열의 리스트여야만 합니다" #: src/qemu/qemu_conf.c:311 #, c-format msgid "%s: remote_display_port_min: port must be greater than or equal to %d" msgstr "" #: src/qemu/qemu_conf.c:325 #, c-format msgid "" "%s: remote_display_port_max: port must be between the minimal port and %d" msgstr "" #: src/qemu/qemu_conf.c:338 #, c-format msgid "%s: remote_display_port_min: min port must not be greater than max port" msgstr "" #: src/qemu/qemu_conf.c:386 msgid "cgroup_controllers must be a list of strings" msgstr "cgroup_controllers는 문자열의 리스트여야만 합니다" #: src/qemu/qemu_conf.c:392 #, fuzzy, c-format msgid "Unknown cgroup controller '%s'" msgstr "알 수 없는 컨트롤러 유형 '%s'" #: src/qemu/qemu_conf.c:428 msgid "cgroup_device_acl must be a list of strings" msgstr "cgroup_device_acl은 문자열의 리스트여야만 합니다" #: src/qemu/qemu_conf.c:502 #, c-format msgid "failed to enable mac filter in '%s'" msgstr "'%s'내의 mac 팔터를 활성화하는 데 실패" #: src/qemu/qemu_conf.c:510 #, c-format msgid "failed to add rule to drop all frames in '%s'" msgstr "'%s'내의 모든 프레임을 드랍하는 규칙을 추가하는 데 실패" #: src/qemu/qemu_conf.c:557 #, fuzzy, c-format msgid "Failed to load lock manager %s" msgstr "블럭 이름 %s 구문 분석 실패" #: src/qemu/qemu_conf.c:617 #, c-format msgid "" "Close callback for domain %s already registered with another connection %p" msgstr "" #: src/qemu/qemu_conf.c:624 #, fuzzy, c-format msgid "Another close callback is already defined for domain %s" msgstr "도메인 '%s'가 uuid %s로 이미 정의되어 있습니다" #: src/qemu/qemu_conf.c:664 #, fuzzy, c-format msgid "Trying to remove mismatching close callback for domain %s" msgstr "도메인 %s의 메모리 통계를 얻는 데 실패했습니다" #: src/qemu/qemu_domain.c:246 msgid "Unexpected QEMU monitor still active during domain deletion" msgstr "" #: src/qemu/qemu_domain.c:250 msgid "Unexpected QEMU agent still active during domain deletion" msgstr "" #: src/qemu/qemu_domain.c:348 msgid "no monitor path" msgstr "모이터 경로가 없음" #: src/qemu/qemu_domain.c:375 #, c-format msgid "unsupported monitor type '%s'" msgstr "지원하지 않는 모니터 유형 '%s'" #: src/qemu/qemu_domain.c:406 #, fuzzy msgid "failed to parse qemu capabilities flags" msgstr "기능 전환 실패" #: src/qemu/qemu_domain.c:419 #, fuzzy, c-format msgid "Unknown qemu capabilities flag %s" msgstr "'%s'에 대한 장치 기능이 없음" #: src/qemu/qemu_domain.c:439 #, fuzzy, c-format msgid "Unknown job type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/qemu/qemu_domain.c:452 #, fuzzy, c-format msgid "Unknown async job type %s" msgstr "알려지지 않은 유형 '%s'" #: src/qemu/qemu_domain.c:463 #, fuzzy, c-format msgid "Unknown job phase %s" msgstr "알려지지 않은 릴리즈: %s" #: src/qemu/qemu_domain.c:518 #, fuzzy, c-format msgid "Failed to register xml namespace '%s'" msgstr "디렉터리 이름 '%s'를 구문분숙 하는 데 실패" #: src/qemu/qemu_domain.c:541 msgid "No qemu command-line argument specified" msgstr "" #: src/qemu/qemu_domain.c:567 #, fuzzy msgid "No qemu environment name specified" msgstr "커널이 지정되지 않았습니다" #: src/qemu/qemu_domain.c:572 msgid "Empty qemu environment name specified" msgstr "" #: src/qemu/qemu_domain.c:577 msgid "Invalid environment name, it must begin with a letter or underscore" msgstr "" #: src/qemu/qemu_domain.c:582 msgid "" "Invalid environment name, it must contain only alphanumerics and underscore" msgstr "" #: src/qemu/qemu_domain.c:842 msgid "cannot acquire state change lock" msgstr "상태 변경 락(lock)을 얻을 수 없음" #: src/qemu/qemu_domain.c:846 #, fuzzy msgid "cannot acquire state change lock due to max_queued limit" msgstr "상태 변경 락(lock)을 얻을 수 없음" #: src/qemu/qemu_domain.c:850 msgid "cannot acquire job mutex" msgstr "작업 뮤텍스(mutex)를 얻을 수 없음" #: src/qemu/qemu_domain.c:902 msgid "Attempt to start invalid job" msgstr "" #: src/qemu/qemu_domain.c:974 #, fuzzy, c-format msgid "unexpected async job %d" msgstr "예기치 못한 디스크 버스 %d" #: src/qemu/qemu_domain.c:986 #, fuzzy msgid "domain is no longer running" msgstr "도메인이 실행중이 아닙니다" #: src/qemu/qemu_domain.c:1238 msgid "cannot get host CPU capabilities" msgstr "호스트 CPU 기능을 얻는 데 실패했습니다" #: src/qemu/qemu_domain.c:1461 #, fuzzy, c-format msgid "failed to set close-on-exec flag on %s" msgstr "" "exec시 닫기(close-on-exec) 디스크립터 플래그를 설정하는 데 실패했습니다" #: src/qemu/qemu_domain.c:1545 #, fuzzy, c-format msgid "Unable to write to domain logfile %s" msgstr "도메인 저장 파일 '%s'를 만드는 데 실패" #: src/qemu/qemu_domain.c:1572 src/storage/storage_backend.c:787 #: src/storage/storage_backend_fs.c:1227 msgid "unable to find kvm-img or qemu-img" msgstr "kvm-img나 qemu-img를 찾을 수 없음" #: src/qemu/qemu_domain.c:1601 #, fuzzy, c-format msgid "cannot create snapshot directory '%s'" msgstr "autostart 디렉터리 '%s'를 생성할 수 없음" #: src/qemu/qemu_domain.c:1669 #, fuzzy, c-format msgid "Disk device '%s' does not support snapshotting" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/qemu/qemu_domain.c:1892 src/qemu/qemu_domain.c:1900 #, fuzzy, c-format msgid "cannot access file '%s'" msgstr "파일 '%s'를 닫을 수 없음" #: src/qemu/qemu_driver.c:203 #, fuzzy, c-format msgid "Failed to start job on VM '%s': %s" msgstr "VM '%s'의 autostart 실패: %s" #: src/qemu/qemu_driver.c:408 #, fuzzy, c-format msgid "Failed to allocate memory for snapshot directory for domain %s" msgstr "도메인 %s의 메모리 통계를 얻는 데 실패했습니다" #: src/qemu/qemu_driver.c:418 #, fuzzy, c-format msgid "Failed to open snapshot directory %s for domain %s: %s" msgstr "도메인 %s의 메모리 통계를 얻는 데 실패했습니다" #: src/qemu/qemu_driver.c:433 #, fuzzy msgid "Failed to allocate memory for path" msgstr "버퍼 메모리 할당에 실패했습니다" #: src/qemu/qemu_driver.c:440 #, fuzzy, c-format msgid "Failed to read snapshot file %s: %s" msgstr "pid 파일 %s/%s.pid 읽기 실패" #: src/qemu/qemu_driver.c:451 #, fuzzy, c-format msgid "Failed to parse snapshot XML from file '%s'" msgstr "XML 조각 %s의 구문분석 실패" #: src/qemu/qemu_driver.c:472 #, fuzzy, c-format msgid "Too many snapshots claiming to be current for domain %s" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: src/qemu/qemu_driver.c:478 #, fuzzy, c-format msgid "Snapshots have inconsistent relations for domain %s" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: src/qemu/qemu_driver.c:649 #, c-format msgid "Failed to create cache dir '%s': %s" msgstr "캐시 디렉터리 '%s'를 생성하는 데 실패: %s" #: src/qemu/qemu_driver.c:664 #, fuzzy, c-format msgid "Failed to create dump dir '%s': %s" msgstr "lib 디렉터리 '%s'를 생성하는 데 실패: %s" #: src/qemu/qemu_driver.c:701 #, fuzzy msgid "Missing lock manager implementation" msgstr "도메인 이름 정보 부재" #: src/qemu/qemu_driver.c:724 #, c-format msgid "unable to set ownership of '%s' to user %d:%d" msgstr "'%s'의 소유권을 사용자 %d로 이전할 수 없음: %d" #: src/qemu/qemu_driver.c:730 src/qemu/qemu_driver.c:736 #: src/qemu/qemu_driver.c:742 #, c-format msgid "unable to set ownership of '%s' to %d:%d" msgstr "'%s'의 소유권을 %d로 이전할 수 없음: %d" #: src/qemu/qemu_driver.c:764 #, c-format msgid "unable to create hugepage path %s" msgstr "hugepage 경로 %s를 만들 수 없음" #: src/qemu/qemu_driver.c:772 #, c-format msgid "unable to set ownership on %s to %d:%d" msgstr "'%s'의 소유권을 %d로 이전할 수 없음: %d" #: src/qemu/qemu_driver.c:1007 msgid "qemu state driver is not active" msgstr "qemu 상태 드라이버가 실행중이 아닙니다" #: src/qemu/qemu_driver.c:1013 #, c-format msgid "no QEMU URI path given, try %s" msgstr "QEMU URI 경로가 주어지지 않았음. %s를 시도" #: src/qemu/qemu_driver.c:1024 #, c-format msgid "unexpected QEMU URI path '%s', try qemu:///system" msgstr "예기치 못한 QEMU URI 경로 '%s', qemu:///system을 시도" #: src/qemu/qemu_driver.c:1031 #, c-format msgid "unexpected QEMU URI path '%s', try qemu:///session" msgstr "예기치 못한 QEMU URI 경로 '%s', qemu:///session을 시도" #: src/qemu/qemu_driver.c:1102 src/util/iohelper.c:58 src/util/virfile.c:529 #: src/util/virfile.c:584 #, c-format msgid "Unable to open %s" msgstr "%s를 열 수 없음" #: src/qemu/qemu_driver.c:1271 src/uml/uml_driver.c:1553 #: src/uml/uml_driver.c:1594 src/vbox/vbox_tmpl.c:1226 #: src/vbox/vbox_tmpl.c:1553 src/vbox/vbox_tmpl.c:1605 #: src/vbox/vbox_tmpl.c:1659 src/vbox/vbox_tmpl.c:1717 #: src/vbox/vbox_tmpl.c:1768 src/vbox/vbox_tmpl.c:1844 #: src/vbox/vbox_tmpl.c:2154 #, c-format msgid "no domain with matching id %d" msgstr "id가 %d와 일치하는 도메인이 없음" #: src/qemu/qemu_driver.c:1587 src/qemu/qemu_driver.c:1646 #, fuzzy msgid "domain is pmsuspended" msgstr "도메인 %s가 중지됨\n" #: src/qemu/qemu_driver.c:1654 src/qemu/qemu_migration.c:3016 #: src/qemu/qemu_migration.c:3146 src/qemu/qemu_process.c:575 #: src/qemu/qemu_process.c:3871 msgid "resume operation failed" msgstr "재개 동작이 실패했습니다" #: src/qemu/qemu_driver.c:1710 src/qemu/qemu_driver.c:1792 #: src/qemu/qemu_driver.c:10407 src/qemu/qemu_driver.c:10435 #: src/qemu/qemu_driver.c:13727 src/qemu/qemu_driver.c:13869 msgid "QEMU guest agent is not available due to an error" msgstr "" #: src/qemu/qemu_driver.c:1716 src/qemu/qemu_driver.c:1798 #: src/qemu/qemu_driver.c:10413 src/qemu/qemu_driver.c:10442 #: src/qemu/qemu_driver.c:13734 src/qemu/qemu_driver.c:13876 msgid "QEMU guest agent is not configured" msgstr "" #: src/qemu/qemu_driver.c:1806 #, fuzzy msgid "Reboot is not supported with this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_driver.c:1812 #, fuzzy msgid "Reboot is not supported without the JSON monitor" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_driver.c:1948 msgid "failed to kill qemu process with SIGTERM" msgstr "" #: src/qemu/qemu_driver.c:2092 #, fuzzy msgid "cannot resize the maximum memory on an active domain" msgstr "동작중인 도메인의 메모리를 설정할 수 없음" #: src/qemu/qemu_driver.c:2129 msgid "" "Unable to change memory of active domain without the balloon device and " "guest OS balloon driver" msgstr "" #: src/qemu/qemu_driver.c:2241 #, c-format msgid "cannot translate keycode %u of %s codeset to rfb keycode" msgstr "" #: src/qemu/qemu_driver.c:2313 src/uml/uml_driver.c:1772 msgid "cannot read cputime for domain" msgstr "도메인에 대한 cputime을 읽을 수 없음" #: src/qemu/qemu_driver.c:2524 #, fuzzy, c-format msgid "failed to write header to domain save file '%s'" msgstr "도메인 저장 파일 '%s'를 만드는 데 실패" #: src/qemu/qemu_driver.c:2532 src/qemu/qemu_driver.c:4948 #, c-format msgid "failed to write xml to '%s'" msgstr "xml을 '%s'에 쓰는 데 실패" #: src/qemu/qemu_driver.c:2591 #, fuzzy, c-format msgid "unable to open %s" msgstr "%s를 열 수 없음" #: src/qemu/qemu_driver.c:2606 src/qemu/qemu_driver.c:2630 #, fuzzy, c-format msgid "Failed to create file '%s'" msgstr "파일 '%s'를 만드는 데 실패" #: src/qemu/qemu_driver.c:2621 #, fuzzy, c-format msgid "Failed to create file '%s': couldn't determine fs type" msgstr "도메인 저장 파일 '%s'를 만드는 데 실패" #: src/qemu/qemu_driver.c:2642 #, c-format msgid "Error from child process creating '%s'" msgstr "'%s' 자식 프로세스 생성시 오류 발생" #: src/qemu/qemu_driver.c:2692 src/qemu/qemu_driver.c:11095 #: src/qemu/qemu_migration.c:807 #, fuzzy msgid "domain is marked for auto destroy" msgstr "%s 도메인은 자동 시작으로 표시됨\n" #: src/qemu/qemu_driver.c:2720 src/qemu/qemu_driver.c:3278 #: src/qemu/qemu_driver.c:10501 src/qemu/qemu_driver.c:10913 #: src/qemu/qemu_driver.c:11973 src/qemu/qemu_driver.c:12025 #: src/qemu/qemu_hotplug.c:416 src/qemu/qemu_hotplug.c:796 #: src/qemu/qemu_migration.c:1936 src/qemu/qemu_migration.c:2237 #: src/qemu/qemu_migration.c:2559 src/qemu/qemu_migration.c:2945 #: src/qemu/qemu_process.c:553 src/qemu/qemu_process.c:566 #, fuzzy msgid "guest unexpectedly quit" msgstr "이전(migration)이 예기치 않게 실패했습니다" #: src/qemu/qemu_driver.c:2752 msgid "failed to get domain xml" msgstr "도메인 xml을 얻는 데 실패" #: src/qemu/qemu_driver.c:2782 src/qemu/qemu_driver.c:3154 #: src/qemu/qemu_driver.c:4547 #, fuzzy msgid "bypass cache unsupported by this system" msgstr "이 qemu에서는 'info blockstats'를 지원하지 않습니다" #: src/qemu/qemu_driver.c:2824 #, fuzzy, c-format msgid "unable to write %s" msgstr "%s를 열 수 없음" #: src/qemu/qemu_driver.c:2911 msgid "Invalid save image format specified in configuration file" msgstr "설정 파일에서 잘못된 저장 이미지 형태가 지정됨" #: src/qemu/qemu_driver.c:2917 msgid "" "Compression program for image format in configuration file isn't available" msgstr "" #: src/qemu/qemu_driver.c:3116 #, fuzzy msgid "dump-guest-memory is not supported" msgstr "cpu 친밀도(affinity)가 지원되지 않습니다" #: src/qemu/qemu_driver.c:3182 #, fuzzy, c-format msgid "unable to close file %s" msgstr "파일 %s 저장 실패" #: src/qemu/qemu_driver.c:3214 #, fuzzy msgid "Invalid dump image format specified in configuration file, using raw" msgstr "설정 파일에서 잘못된 저장 이미지 형태가 지정됨" #: src/qemu/qemu_driver.c:3219 msgid "" "Compression program for dump image format in configuration file isn't " "available, using raw" msgstr "" #: src/qemu/qemu_driver.c:3315 msgid "resuming after dump failed" msgstr "덤프한 후 재개하는 데 실패했습니다" #: src/qemu/qemu_driver.c:3359 src/qemu/qemu_driver.c:8268 #, fuzzy, c-format msgid "no domain matching uuid '%s'" msgstr "uuid가 '%s'와 일치하는 도메인이 없음" #: src/qemu/qemu_driver.c:3378 msgid "currently is supported only taking screenshots of screen ID 0" msgstr "" #: src/qemu/qemu_driver.c:3389 src/qemu/qemu_driver.c:9106 #: src/vbox/vbox_tmpl.c:9157 #, c-format msgid "mkstemp(\"%s\") failed" msgstr "mkstemp(\"%s\") 실패함" #: src/qemu/qemu_driver.c:3410 src/vbox/vbox_tmpl.c:9211 #, fuzzy msgid "unable to open stream" msgstr "%s를 열 수 없음" #: src/qemu/qemu_driver.c:3472 #, fuzzy msgid "Dump failed" msgstr "popen 실패" #: src/qemu/qemu_driver.c:3480 #, fuzzy msgid "Resuming after dump failed" msgstr "덤프한 후 재개하는 데 실패했습니다" #: src/qemu/qemu_driver.c:3559 src/qemu/qemu_process.c:1673 #, c-format msgid "got wrong number of vCPU pids from QEMU monitor. got %d, wanted %d" msgstr "QEMU 모니터에서 vCPU pid의 갯수를 잘못 얻음. 얻은 값 %d, 원하는 값 %d" #: src/qemu/qemu_driver.c:3580 msgid "cannot change vcpu count of this domain" msgstr "이 도메인의 vcpu 갯수를 변경할 수 없음" #: src/qemu/qemu_driver.c:3603 src/test/test_driver.c:2180 #: src/xen/xen_driver.c:1136 #, fuzzy, c-format msgid "argument out of range: %d" msgstr "vcpu 갯수가 범위를 벗어남 %d > %d" #: src/qemu/qemu_driver.c:3632 #, fuzzy msgid "cannot adjust maximum on running domain" msgstr "동작중인 도메인을 삭제할 수 없음" #: src/qemu/qemu_driver.c:3741 #, c-format msgid "vcpu number out of range %d > %d" msgstr "vcpu 갯수가 범위를 벗어남 %d > %d" #: src/qemu/qemu_driver.c:3766 src/qemu/qemu_driver.c:4098 #: src/qemu/qemu_process.c:1962 msgid "cpu affinity is not supported" msgstr "cpu 친밀도(affinity)가 지원되지 않습니다" #: src/qemu/qemu_driver.c:3787 src/qemu/qemu_driver.c:4047 #, fuzzy msgid "failed to update vcpupin" msgstr "도메인 xml을 얻는 데 실패" #: src/qemu/qemu_driver.c:3798 #, fuzzy, c-format msgid "failed to set cpuset.cpus in cgroup for vcpu %d" msgstr "%s에 대한 cgroup을 생성할 수 없음" #: src/qemu/qemu_driver.c:3806 #, fuzzy, c-format msgid "failed to set cpu affinity for vcpu %d" msgstr "읽기 용 %s 열기 실패" #: src/qemu/qemu_driver.c:3815 #, fuzzy msgid "failed to delete vcpupin xml of a running domain" msgstr "동작중인 도메인을 삭제할 수 없음" #: src/qemu/qemu_driver.c:3840 #, fuzzy msgid "failed to delete vcpupin xml of a persistent domain" msgstr "xml 문서 구문분석 실패" #: src/qemu/qemu_driver.c:3858 #, fuzzy msgid "failed to update or add vcpupin xml of a persistent domain" msgstr "도메인 xml을 얻는 데 실패" #: src/qemu/qemu_driver.c:4063 #, fuzzy msgid "failed to set cpuset.cpus in cgroup for emulator threads" msgstr "%s에 대한 모니터연결 실패" #: src/qemu/qemu_driver.c:4072 #, fuzzy msgid "failed to set cpu affinity for emulator threads" msgstr "%s에 대한 모니터연결 실패" #: src/qemu/qemu_driver.c:4081 #, fuzzy msgid "failed to delete emulatorpin xml of a running domain" msgstr "동작중인 도메인을 삭제할 수 없음" #: src/qemu/qemu_driver.c:4111 #, fuzzy msgid "failed to delete emulatorpin xml of a persistent domain" msgstr "xml 문서 구문분석 실패" #: src/qemu/qemu_driver.c:4118 #, fuzzy msgid "failed to update or add emulatorpin xml of a persistent domain" msgstr "도메인 xml을 얻는 데 실패" #: src/qemu/qemu_driver.c:4243 msgid "cannot list vcpu pinning for an inactive domain" msgstr "비활성화된 도메인의 vcpu 고정 목록을 얻을 수 없음" #: src/qemu/qemu_driver.c:4275 msgid "cannot get vCPU placement & pCPU time" msgstr "vCPU 위치와 pCPU 시간을 얻을 수 없음" #: src/qemu/qemu_driver.c:4293 msgid "cpu affinity is not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/qemu/qemu_driver.c:4564 src/qemu/qemu_driver.c:4584 #, fuzzy, c-format msgid "cannot remove corrupt file: %s" msgstr "'%s' 설정 파일을 제거할 수 없음" #: src/qemu/qemu_driver.c:4571 msgid "failed to read qemu header" msgstr "qemu 헤더를 읽는 것을 실패" #: src/qemu/qemu_driver.c:4580 #, fuzzy msgid "save image is incomplete" msgstr "이미지 매직이 잘못되었습니다" #: src/qemu/qemu_driver.c:4628 src/qemu/qemu_driver.c:4733 #, fuzzy, c-format msgid "cannot close file: %s" msgstr "파일 '%s'를 닫을 수 없음" #: src/qemu/qemu_driver.c:4689 #, c-format msgid "Invalid compressed save format %d" msgstr "잘못된 암축 보존 형태 %d" #: src/qemu/qemu_driver.c:4704 #, c-format msgid "Failed to start decompression binary %s" msgstr "바이너리 %s의 압축 해제 시작 실패" #: src/qemu/qemu_driver.c:4757 msgid "failed to resume domain" msgstr "도메인을 재개하는 것에 실패" #: src/qemu/qemu_driver.c:4933 #, fuzzy msgid "new xml too large to fit in file" msgstr "설정 파일 구문 분석 실패" #: src/qemu/qemu_driver.c:4942 #, fuzzy, c-format msgid "cannot seek in '%s'" msgstr "'%s'를 열 수 없음" #: src/qemu/qemu_driver.c:5304 #, fuzzy, c-format msgid "cannot remove managed save file %s" msgstr "'%s' 설정 파일을 제거할 수 없음" #: src/qemu/qemu_driver.c:5379 msgid "domain is already running" msgstr "도메인이 이미 실행중입니다" #: src/qemu/qemu_driver.c:5638 #, fuzzy, c-format msgid "cannot delete inactive domain with %d snapshots" msgstr "동작중인 도메인을 삭제할 수 없음" #: src/qemu/qemu_driver.c:5742 #, fuzzy msgid "disk device='lun' is not supported for usb bus" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/qemu/qemu_driver.c:5789 #, c-format msgid "disk controller bus '%s' cannot be hotplugged." msgstr "디스크 컨트롤러 버스 '%s'가 핫플러그될 수 없습니다" #: src/qemu/qemu_driver.c:5876 src/uml/uml_driver.c:2206 #, fuzzy msgid "This type of disk cannot be hot unplugged" msgstr "이런 유형의 장치는 핫 언플러그될 수 없습니다" #: src/qemu/qemu_driver.c:5880 #, fuzzy, c-format msgid "disk device type '%s' cannot be detached" msgstr "장치 유형 '%s'가 부착될 수 없습니다" #: src/qemu/qemu_driver.c:5901 #, c-format msgid "disk controller bus '%s' cannot be hotunplugged." msgstr "디스크 컨트롤러 버스 '%s'는 핫 언플러그될 수 없습니다" #: src/qemu/qemu_driver.c:5933 src/uml/uml_driver.c:2210 msgid "This type of device cannot be hot unplugged" msgstr "이런 유형의 장치는 핫 언플러그될 수 없습니다" #: src/qemu/qemu_driver.c:6054 #, fuzzy, c-format msgid "mac %s already exists" msgstr "타겟 %s가 이미 존재합니다" #: src/qemu/qemu_driver.c:6070 #, fuzzy msgid "device is already in the domain configuration" msgstr "vcpupin: 도메인 정보를 얻어오는 데 실패했습니다." #: src/qemu/qemu_driver.c:6086 #, fuzzy, c-format msgid "Lease %s in lockspace %s already exists" msgstr "인터페이스 %s가 이미 존재합니다" #: src/qemu/qemu_driver.c:6102 #, fuzzy msgid "Target already exists" msgstr "타겟 %s가 이미 존재합니다" #: src/qemu/qemu_driver.c:6152 #, c-format msgid "no nic of mac %s" msgstr "" #: src/qemu/qemu_driver.c:6162 src/qemu/qemu_driver.c:6186 #, fuzzy msgid "device not present in domain configuration" msgstr "Xend 도메인 정보 분석 실패" #: src/qemu/qemu_driver.c:6174 src/qemu/qemu_hotplug.c:2398 #, fuzzy, c-format msgid "Lease %s in lockspace %s does not exist" msgstr "인터페이스 %s가 존재하지 않습니다" #: src/qemu/qemu_driver.c:6254 #, fuzzy, c-format msgid "mac %s doesn't exist" msgstr "'%s' 명령이 존재하지 않음" #: src/qemu/qemu_driver.c:6324 #, fuzzy msgid "cannot do live update a device on inactive domain" msgstr "작동중이 아닌 도메인에서 장치를 탈착할 수 없음" #: src/qemu/qemu_driver.c:6713 #, fuzzy, c-format msgid "unable to parse device weight '%s'" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/qemu/qemu_driver.c:6848 #, fuzzy, c-format msgid "Unable to set io device weight for path %s" msgstr "도메인 %s에 대한 메모리 제한을 설정할 수 없음" #: src/qemu/qemu_driver.c:7033 src/qemu/qemu_driver.c:7073 #: src/util/virtypedparam.c:139 #, fuzzy, c-format msgid "Field name '%s' too long" msgstr "설정 파일 이름이 너무 깂니다" #: src/qemu/qemu_driver.c:7149 src/qemu/qemu_driver.c:7306 #: src/qemu/qemu_driver.c:7649 #, fuzzy msgid "cgroup memory controller is not mounted" msgstr "디스크 컨트롤러 %s:%d를 찾을 수 없음" #: src/qemu/qemu_driver.c:7175 #, fuzzy msgid "hard limit must be lower than swap hard limit" msgstr "cpu shares tunable을 얻을 수 없음" #: src/qemu/qemu_driver.c:7468 #, fuzzy msgid "cgroup cpuset controller is not mounted" msgstr "디스크 컨트롤러 %s:%d를 찾을 수 없음" #: src/qemu/qemu_driver.c:7488 #, fuzzy msgid "can't change numa mode for running domain" msgstr "동작중인 도메인을 삭제할 수 없음" #: src/qemu/qemu_driver.c:7511 #, fuzzy msgid "Failed to parse nodeset" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: src/qemu/qemu_driver.c:7520 msgid "change of nodeset for running domain requires strict numa mode" msgstr "" #: src/qemu/qemu_driver.c:7531 #, fuzzy msgid "Failed to format nodeset" msgstr "소켓 생성 실패" #: src/qemu/qemu_driver.c:7539 #, fuzzy msgid "unable to set numa tunable" msgstr "cpu shares tunable을 설정할 수 없음" #: src/qemu/qemu_driver.c:7687 #, fuzzy msgid "unable to get numa nodeset" msgstr "기능 전환 실패" #: src/qemu/qemu_driver.c:7739 #, fuzzy, c-format msgid "Unable to find vcpu cgroup for %s(vcpu: %d)" msgstr "%s에 대한 cgroup을 찾을 수 없음\n" #: src/qemu/qemu_driver.c:7777 src/qemu/qemu_driver.c:8052 #, fuzzy, c-format msgid "Unable to find emulator cgroup for %s" msgstr "%s에 대한 cgroup을 찾을 수 없음\n" #: src/qemu/qemu_driver.c:8014 #, fuzzy, c-format msgid "Unable to find vcpu cgroup for %s(vcpu: 0)" msgstr "%s에 대한 cgroup을 찾을 수 없음\n" #: src/qemu/qemu_driver.c:8245 #, fuzzy msgid "empty path" msgstr "NULL 또는 비어있는 경로" #: src/qemu/qemu_driver.c:8253 #, c-format msgid "size must be less than %llu" msgstr "" #: src/qemu/qemu_driver.c:8285 src/qemu/qemu_driver.c:8350 #: src/qemu/qemu_driver.c:8436 src/test/test_driver.c:2805 #, c-format msgid "invalid path: %s" msgstr "잘못된 경로: %s" #: src/qemu/qemu_driver.c:8357 src/qemu/qemu_driver.c:8443 #: src/qemu/qemu_hotplug.c:79 #, c-format msgid "missing disk device alias name for %s" msgstr "%s에 대한 디스크 장치 별칭이 빠짐" #: src/qemu/qemu_driver.c:8629 #, fuzzy msgid "interface stats not implemented on this platform" msgstr "이 플랫폼에는 노드 정보가 구현되어 있지 않습니다" #: src/qemu/qemu_driver.c:8685 src/qemu/qemu_driver.c:8693 #: src/qemu/qemu_driver.c:8857 #, fuzzy, c-format msgid "Can't find device %s" msgstr "문자 디바이스 %s에서 포트 번호를 찾을 수 없음" #: src/qemu/qemu_driver.c:8970 #, fuzzy msgid "cannot get RSS for domain" msgstr "도메인에 대한 cputime을 읽을 수 없음" #: src/qemu/qemu_driver.c:9017 src/qemu/qemu_driver.c:9182 #: src/uml/uml_driver.c:2357 msgid "NULL or empty path" msgstr "NULL 또는 비어있는 경로" #: src/qemu/qemu_driver.c:9024 src/uml/uml_driver.c:2364 #, fuzzy, c-format msgid "invalid path '%s'" msgstr "잘못된 경로: %s" #: src/qemu/qemu_driver.c:9033 #, c-format msgid "%s: failed to open" msgstr "%s: 여는 데 실패" #: src/qemu/qemu_driver.c:9044 #, c-format msgid "%s: failed to seek or read" msgstr "%s: seek이나 읽기가 실패함" #: src/qemu/qemu_driver.c:9085 msgid "flags parameter must be VIR_MEMORY_VIRTUAL or VIR_MEMORY_PHYSICAL" msgstr "" "플래그 매개변수는 VIR_MEMORY_VIRTUAL이거나 VIR_MEMORY_PHYSICAL이어야 합니다" #: src/qemu/qemu_driver.c:9130 #, c-format msgid "failed to read temporary file created with template %s" msgstr "템플릿 %s로 생성된 임시 파일을 읽는 데 실패" #: src/qemu/qemu_driver.c:9189 #, fuzzy, c-format msgid "invalid path %s not assigned to domain" msgstr "잘못된 경로, '%s'는 알려진 인터페이스가 이닙니다" #: src/qemu/qemu_driver.c:9195 #, c-format msgid "disk %s does not currently have a source assigned" msgstr "" #: src/qemu/qemu_driver.c:9205 #, fuzzy, c-format msgid "failed to open path '%s'" msgstr "경로 '%s'를 opendir하는데 실패" #: src/qemu/qemu_driver.c:9213 #, fuzzy, c-format msgid "unknown disk format %s for %s" msgstr "알려져 있지 않은 풀(pool) 형식 타입 %s" #: src/qemu/qemu_driver.c:9242 src/storage/storage_backend.c:1022 #: src/storage/storage_backend.c:1050 src/storage/storage_backend.c:1170 #: src/util/storage_file.c:746 src/util/storage_file.c:842 #, c-format msgid "cannot stat file '%s'" msgstr "파일 '%s'를 stat할 수 없음" #: src/qemu/qemu_driver.c:9264 #, fuzzy, c-format msgid "failed to seek to end of %s" msgstr "파일에서 읽거나 lseek하는 데 실패했습니다: %s" #: src/qemu/qemu_driver.c:9418 src/qemu/qemu_driver.c:9490 #: src/qemu/qemu_driver.c:9730 src/qemu/qemu_driver.c:9765 msgid "no domain XML passed" msgstr "도메인 XML이 넘겨지지 않음" #: src/qemu/qemu_driver.c:9423 src/qemu/qemu_driver.c:9770 msgid "PrepareTunnel called but no TUNNELLED flag set" msgstr "PrepareTunnel이 호출되었지만 TUNNELLED 플래그가 설정되지 않았습니다" #: src/qemu/qemu_driver.c:9428 src/qemu/qemu_driver.c:9775 msgid "tunnelled migration requested but NULL stream passed" msgstr "터널링을 이용한 이전이 요청되었지만 NULL 스트림이 넘겨졌습니다" #: src/qemu/qemu_driver.c:9434 src/qemu/qemu_driver.c:9474 #: src/qemu/qemu_driver.c:9529 #, c-format msgid "Cannot use migrate v2 protocol with lock manager %s" msgstr "" #: src/qemu/qemu_driver.c:9484 src/qemu/qemu_driver.c:9724 msgid "Tunnelled migration requested but invalid RPC method called" msgstr "" "터널링을 이용한 이전이 요청되었으나, 잘못된 RPC 메소드가 호출되었습니다" #: src/qemu/qemu_driver.c:9672 src/qemu/qemu_migration.c:1375 #, fuzzy msgid "domain disappeared" msgstr "도메인이 일시 중지되지 않았습니다" #: src/qemu/qemu_driver.c:9959 src/xen/xen_driver.c:1979 #, c-format msgid "device %s is not a PCI device" msgstr "장치 %s는 PCI 장치가 아닙니다" #: src/qemu/qemu_driver.c:10023 #, fuzzy, c-format msgid "PCI device %s is still in use by domain %s" msgstr "장치 %s가 이미 사용중입니다" #: src/qemu/qemu_driver.c:10027 #, fuzzy, c-format msgid "PCI device %s is still in use" msgstr "장치 %s가 이미 사용중입니다" #: src/qemu/qemu_driver.c:10087 #, fuzzy msgid "cannot get host capabilities" msgstr "호스트 CPU 기능을 얻는 데 실패했습니다" #: src/qemu/qemu_driver.c:10198 msgid "no job is active on the domain" msgstr "도메인에 작동중인 잡이 없습니다" #: src/qemu/qemu_driver.c:10202 msgid "cannot abort incoming migration; use virDomainDestroy instead" msgstr "" #: src/qemu/qemu_driver.c:10260 msgid "domain is not being migrated" msgstr "도메인이 이전중 아닙니다" #: src/qemu/qemu_driver.c:10390 #, fuzzy, c-format msgid "Disk '%s' does not support snapshotting" msgstr "ps2 버스는 %s 입력 장치를 지원하지 않음 " #: src/qemu/qemu_driver.c:10535 src/qemu/qemu_driver.c:11011 #, fuzzy msgid "resuming after snapshot failed" msgstr "덤프한 후 재개하는 데 실패했습니다" #: src/qemu/qemu_driver.c:10565 #, fuzzy msgid "reuse is not supported with this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_driver.c:10576 #, c-format msgid "" "active qemu domains require external disk snapshots; disk %s requested " "internal" msgstr "" #: src/qemu/qemu_driver.c:10584 #, fuzzy, c-format msgid "internal snapshot for disk %s unsupported for storage type %s" msgstr "인터페이스의 유형이 지원되지 않는 '%s'입니다" #: src/qemu/qemu_driver.c:10602 #, c-format msgid "external snapshot format for disk %s is unsupported: %s" msgstr "" #: src/qemu/qemu_driver.c:10610 #, fuzzy, c-format msgid "unable to stat for disk %s: %s" msgstr "USB 디스크 %s를 추가할 수 없음: %s" #: src/qemu/qemu_driver.c:10616 #, c-format msgid "" "external snapshot file for disk %s already exists and is not a block device: " "%s" msgstr "" #: src/qemu/qemu_driver.c:10631 src/qemu/qemu_driver.c:10685 #, fuzzy msgid "unexpected code path" msgstr "예기치 못한 디스크 캐시 모드 %d" #: src/qemu/qemu_driver.c:10638 msgid "disk snapshots require at least one disk to be selected for snapshot" msgstr "" #: src/qemu/qemu_driver.c:10648 msgid "atomic live snapshot of multiple disks is unsupported" msgstr "" #: src/qemu/qemu_driver.c:11071 msgid "quiesce requires disk-only" msgstr "" #: src/qemu/qemu_driver.c:11100 #, fuzzy msgid "cannot halt after transient domain snapshot" msgstr "임시 도메인 정의를 해제할 수 없음" #: src/qemu/qemu_driver.c:11114 #, fuzzy, c-format msgid "cannot set snapshot %s as its own parent" msgstr "동작중인 도메인을 삭제할 수 없음" #: src/qemu/qemu_driver.c:11121 #, fuzzy, c-format msgid "parent %s for snapshot %s not found" msgstr "도메인을 찾을 수 없음" #: src/qemu/qemu_driver.c:11128 #, fuzzy, c-format msgid "parent %s would create cycle to %s" msgstr "%s를 %s 생성을 위해 실행할 수 없음" #: src/qemu/qemu_driver.c:11146 #, c-format msgid "definition for snapshot %s must use uuid %s" msgstr "" #: src/qemu/qemu_driver.c:11157 #, fuzzy, c-format msgid "cannot change between online and offline snapshot state in snapshot %s" msgstr "CPU 온라인 상태를 변경할 수 없음" #: src/qemu/qemu_driver.c:11165 #, c-format msgid "" "cannot change between disk snapshot and system checkpoint in snapshot %s" msgstr "" #: src/qemu/qemu_driver.c:11210 msgid "disk snapshots of inactive domains not implemented yet" msgstr "" #: src/qemu/qemu_driver.c:11431 src/qemu/qemu_driver.c:11471 #: src/qemu/qemu_driver.c:11511 src/qemu/qemu_driver.c:11615 #: src/qemu/qemu_driver.c:11693 src/qemu/qemu_driver.c:11731 #: src/qemu/qemu_driver.c:11771 src/qemu/qemu_driver.c:11844 #: src/qemu/qemu_driver.c:12212 #, fuzzy, c-format msgid "no domain snapshot with matching name '%s'" msgstr "이름이 '%s'와 일치하는 도메인이 없음" #: src/qemu/qemu_driver.c:11550 #, fuzzy, c-format msgid "no snapshot with matching name '%s'" msgstr "이름이 '%s'와 일치하는 풀이 없음" #: src/qemu/qemu_driver.c:11657 #, fuzzy msgid "the domain does not have a current snapshot" msgstr "도메인을 다른 호스트로 이전" #: src/qemu/qemu_driver.c:11855 msgid "" "transient domain needs to request run or pause to revert to inactive snapshot" msgstr "" #: src/qemu/qemu_driver.c:11861 #, fuzzy msgid "revert to external disk snapshot not supported yet" msgstr "디스크 암호 설정을 지원하지 않습니다" #: src/qemu/qemu_driver.c:11868 #, c-format msgid "snapshot '%s' lacks domain '%s' rollback info" msgstr "" #: src/qemu/qemu_driver.c:11878 msgid "must respawn qemu to start inactive snapshot" msgstr "" #: src/qemu/qemu_driver.c:12227 #, fuzzy, c-format msgid "deletion of %d external disk snapshots not supported yet" msgstr "디스크 암호 설정을 지원하지 않습니다" #: src/qemu/qemu_driver.c:12254 #, fuzzy, c-format msgid "failed to set snapshot '%s' as current" msgstr "xml 문서 구문분석 실패" #: src/qemu/qemu_driver.c:12381 #, fuzzy, c-format msgid "No monitor connection for pid %u" msgstr "하이퍼바이저 연결 URI" #: src/qemu/qemu_driver.c:12386 #, c-format msgid "Cannot connect to monitor connection of type '%s' for pid %u" msgstr "" #: src/qemu/qemu_driver.c:12504 #, fuzzy, c-format msgid "cannot find character device %s" msgstr "문자 디바이스 %s에서 포트 번호를 찾을 수 없음" #: src/qemu/qemu_driver.c:12524 msgid "Active console session exists for this domain" msgstr "" #: src/qemu/qemu_driver.c:12563 msgid "No device found for specified path" msgstr "" #: src/qemu/qemu_driver.c:12603 #, fuzzy msgid "block jobs not supported with this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_driver.c:12607 #, fuzzy msgid "partial block pull not supported with this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_driver.c:12612 #, fuzzy msgid "" "setting bandwidth at start of block pull not supported with this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_driver.c:12778 #, fuzzy, c-format msgid "No graphics backend with index %d" msgstr "id %d로 시작하는 도메인 없음" #: src/qemu/qemu_driver.c:12790 #, c-format msgid "Can only open VNC or SPICE graphics backends, not %s" msgstr "" #: src/qemu/qemu_driver.c:12914 msgid "total and read/write of bytes_sec cannot be set at the same time" msgstr "" #: src/qemu/qemu_driver.c:12921 msgid "total and read/write of iops_sec cannot be set at the same time" msgstr "" #: src/qemu/qemu_driver.c:12968 #, fuzzy msgid "Write to config file failed" msgstr "fd %d에 쓰기가 실패했습니다" #: src/qemu/qemu_driver.c:13254 #, fuzzy msgid "QEmu driver does not support modifying element" msgstr "Xend 버전이 영구적인 설정을 변경하는 것을 지원하지 않습니다" #: src/qemu/qemu_driver.c:13260 src/qemu/qemu_driver.c:13287 #: src/qemu/qemu_driver.c:13356 #, fuzzy msgid "unknown metadata type" msgstr "알려지지 않은 저장 볼륨 유형 %d" #: src/qemu/qemu_driver.c:13282 src/qemu/qemu_driver.c:13350 #, fuzzy msgid "QEMU driver does not support element" msgstr "qeum 에뮬레이터 '%s'가 xen을 지원하지 않습니다" #: src/qemu/qemu_driver.c:13363 #, fuzzy msgid "Requested metadata element is not present" msgstr "인터페이스 %s가 존재하지 않습니다" #: src/qemu/qemu_driver.c:13392 src/qemu/qemu_driver.c:13406 #, fuzzy msgid "unable to get cpu account" msgstr "모니터 이벤트를 등록할 수 없음" #: src/qemu/qemu_driver.c:13459 msgid "error accessing cgroup cpuacct for vcpu" msgstr "" #: src/qemu/qemu_driver.c:13470 src/qemu/qemu_driver.c:13551 #, fuzzy msgid "cpuacct parse error" msgstr "구문 분석 오류" #: src/qemu/qemu_driver.c:13526 #, c-format msgid "start_cpu %d larger than maximum of %d" msgstr "" #: src/qemu/qemu_driver.c:13581 msgid "the set of online cpus changed while reading" msgstr "" #: src/qemu/qemu_driver.c:13645 #, fuzzy msgid "cgroup CPUACCT controller is not mounted" msgstr "디스크 컨트롤러 %s:%d를 찾을 수 없음" #: src/qemu/qemu_driver.c:13683 #, fuzzy msgid "Duration not supported. Use 0 for now" msgstr "%s 장치에 대해 이동식 미디어가 지원되지 않음" #: src/qemu/qemu_driver.c:13691 #, fuzzy, c-format msgid "Unknown suspend target: %u" msgstr "잘못된 비밀정보" #: src/qemu/qemu_driver.c:13720 msgid "Unable to suspend domain due to missing system_wakeup monitor command" msgstr "" #: src/qemu/qemu_driver.c:13797 msgid "Unable to wake up domain due to missing system_wakeup monitor command" msgstr "" #: src/qemu/qemu_driver.c:13894 #, fuzzy msgid "Failed to execute agent command" msgstr "QEMU 명령 '%s'를 실행할 수 없음" #: src/qemu/qemu_hostdev.c:277 #, fuzzy, c-format msgid "" "virtualport type %s is currently not supported on interfaces of type hostdev" msgstr "이더넷 인터페이스에 대해 스크립트 실행이 지원되지 않습니다" #: src/qemu/qemu_hostdev.c:315 src/qemu/qemu_hostdev.c:380 msgid "" "Interface type hostdev is currently supported on SR-IOV Virtual Functions " "only" msgstr "" #: src/qemu/qemu_hostdev.c:329 #, c-format msgid "" "direct setting of the vlan tag is not allowed for hostdev devices using %s " "mode" msgstr "" #: src/qemu/qemu_hostdev.c:342 #, fuzzy msgid "vlan trunking is not supported by SR-IOV network devices" msgstr "%s 장치에 대해 이동식 미디어가 지원되지 않음" #: src/qemu/qemu_hostdev.c:348 #, c-format msgid "vlan can only be set for SR-IOV VFs, but %s is not a VF" msgstr "" #: src/qemu/qemu_hostdev.c:434 #, fuzzy, c-format msgid "PCI device %s is not assignable" msgstr "장치 %s는 PCI 장치가 아닙니다" #: src/qemu/qemu_hostdev.c:446 #, fuzzy, c-format msgid "PCI device %s is in use by domain %s" msgstr "장치 %s가 이미 사용중입니다" #: src/qemu/qemu_hostdev.c:450 #, fuzzy, c-format msgid "PCI device %s is already in use" msgstr "장치 %s가 이미 사용중입니다" #: src/qemu/qemu_hostdev.c:614 #, fuzzy, c-format msgid "USB device %s is in use by domain %s" msgstr "장치 %s가 이미 사용중입니다" #: src/qemu/qemu_hostdev.c:618 #, fuzzy, c-format msgid "USB device %s is already in use" msgstr "장치 %s가 이미 사용중입니다" #: src/qemu/qemu_hostdev.c:688 src/qemu/qemu_hotplug.c:1160 #, c-format msgid "multiple USB devices for %x:%x, use
to specify one" msgstr "" #: src/qemu/qemu_hostdev.c:773 #, c-format msgid "Failed to re-attach PCI device: %s" msgstr "PCI 장치를 재부착하는 데 실패: %s" #: src/qemu/qemu_hostdev.c:792 #, c-format msgid "Failed to allocate pciDeviceList: %s" msgstr "pciDeviceList 할당 실패: %s" #: src/qemu/qemu_hostdev.c:841 #, c-format msgid "Failed to reset PCI device: %s" msgstr "PCI 장치를 리셋하는 데 실패: %s" #: src/qemu/qemu_hotplug.c:320 #, c-format msgid "target %s:%d already exists" msgstr "타겟 %s:%d가 이미 존재합니다" #: src/qemu/qemu_hotplug.c:336 #, fuzzy msgid "USB controller hotplug unsupported in this QEMU binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/qemu/qemu_hotplug.c:459 #, c-format msgid "unexpected disk address type %s" msgstr "예기치 못한 디스크 주소 유형 %s" #: src/qemu/qemu_hotplug.c:487 #, c-format msgid "SCSI controller %d was missing its PCI address" msgstr "SISC 컨트롤러 %d에 PCI 주소가 빠졌습니다" #: src/qemu/qemu_hotplug.c:693 msgid "installed qemu version does not support host_net_add" msgstr "설치된 qemu 버전이 host_net_add를 지원하지 않습니다" #: src/qemu/qemu_hotplug.c:744 msgid "Unable to attach network devices without vlan" msgstr "vlan없이 네트워크 장치를 부착할 수 없음" #: src/qemu/qemu_hotplug.c:832 msgid "device alias not found: cannot set link state to down" msgstr "" #: src/qemu/qemu_hotplug.c:844 #, fuzzy msgid "setting of link state not supported: Link is up" msgstr "이 qemu에서는 'info blockstats'를 지원하지 않습니다" #: src/qemu/qemu_hotplug.c:965 #, fuzzy msgid "guest unexpectedly quit during hotplug" msgstr "시작 중 컨테이너 '%s' 예기치 못한 종료" #: src/qemu/qemu_hotplug.c:1136 src/qemu/qemu_hotplug.c:2124 #, c-format msgid "hostdev mode '%s' not supported" msgstr "hostdev 모드 '%s'가 지원되지 않음" #: src/qemu/qemu_hotplug.c:1212 src/qemu/qemu_hotplug.c:2096 #, c-format msgid "hostdev subsys type '%s' not supported" msgstr "hostdev subsys 유형 '%s'가 지원되지 않음" #: src/qemu/qemu_hotplug.c:1259 #, fuzzy, c-format msgid "bridge %s doesn't exist" msgstr "'%s' 명령이 존재하지 않음" #: src/qemu/qemu_hotplug.c:1281 #, fuzzy, c-format msgid "unable to recover former state by adding portto bridge %s" msgstr "파이프를 생성할 수 없" #: src/qemu/qemu_hotplug.c:1304 msgid "can't change link state: device alias not found" msgstr "" #: src/qemu/qemu_hotplug.c:1334 #, fuzzy msgid "cannot find existing network device to modify" msgstr "그래픽 장치를 추출할 수 없음" #: src/qemu/qemu_hotplug.c:1340 #, fuzzy msgid "cannot change network interface type" msgstr "네트워크 인터페이스 유형" #: src/qemu/qemu_hotplug.c:1346 #, fuzzy msgid "cannot change settings" msgstr "이 도메인의 vcpu 갯수를 변경할 수 없음" #: src/qemu/qemu_hotplug.c:1358 #, fuzzy msgid "cannot modify ethernet network device configuration" msgstr "도메인의 영구 설정을 변경할 수 없음" #: src/qemu/qemu_hotplug.c:1369 #, fuzzy msgid "cannot modify network socket device configuration" msgstr "도메인의 영구 설정을 변경할 수 없음" #: src/qemu/qemu_hotplug.c:1378 src/qemu/qemu_hotplug.c:1417 #: src/qemu/qemu_hotplug.c:1425 #, fuzzy msgid "cannot modify network device configuration" msgstr "도메인의 영구 설정을 변경할 수 없음" #: src/qemu/qemu_hotplug.c:1391 #, fuzzy msgid "cannot modify internal network device configuration" msgstr "도메인의 영구 설정을 변경할 수 없음" #: src/qemu/qemu_hotplug.c:1400 #, fuzzy msgid "cannot modify direct network device configuration" msgstr "도메인의 영구 설정을 변경할 수 없음" #: src/qemu/qemu_hotplug.c:1407 #, fuzzy, c-format msgid "unable to change config on '%s' network type" msgstr "모니터 유형을 처리할 수 없음: %s" #: src/qemu/qemu_hotplug.c:1472 #, fuzzy msgid "cannot find existing graphics device to modify" msgstr "그래픽 장치를 추출할 수 없음" #: src/qemu/qemu_hotplug.c:1487 #, fuzzy msgid "cannot change port settings on vnc graphics" msgstr "이 도메인의 vcpu 갯수를 변경할 수 없음" #: src/qemu/qemu_hotplug.c:1492 msgid "cannot change listen address setting on vnc graphics" msgstr "" #: src/qemu/qemu_hotplug.c:1497 #, fuzzy msgid "cannot change listen network setting on vnc graphics" msgstr "이 도메인의 vcpu 갯수를 변경할 수 없음" #: src/qemu/qemu_hotplug.c:1502 msgid "cannot change keymap setting on vnc graphics" msgstr "" #: src/qemu/qemu_hotplug.c:1540 #, fuzzy msgid "cannot change port settings on spice graphics" msgstr "이 도메인의 vcpu 갯수를 변경할 수 없음" #: src/qemu/qemu_hotplug.c:1545 #, fuzzy msgid "cannot change listen address setting on spice graphics" msgstr "이 도메인의 vcpu 갯수를 변경할 수 없음" #: src/qemu/qemu_hotplug.c:1550 #, fuzzy msgid "cannot change listen network setting on spice graphics" msgstr "이 도메인의 vcpu 갯수를 변경할 수 없음" #: src/qemu/qemu_hotplug.c:1556 #, fuzzy msgid "cannot change keymap setting on spice graphics" msgstr "이 도메인의 vcpu 갯수를 변경할 수 없음" #: src/qemu/qemu_hotplug.c:1594 #, fuzzy, c-format msgid "unable to change config on '%s' graphics type" msgstr "모니터 유형을 처리할 수 없음: %s" #: src/qemu/qemu_hotplug.c:1664 src/qemu/qemu_hotplug.c:1908 #, fuzzy, c-format msgid "cannot hot unplug multifunction PCI device: %s" msgstr " %s macvtap 탭 장치를 열 수 없습니다" #: src/qemu/qemu_hotplug.c:1681 src/qemu/qemu_hotplug.c:1902 #: src/qemu/qemu_hotplug.c:1975 src/qemu/qemu_hotplug.c:2207 msgid "device cannot be detached without a PCI address" msgstr "장치가 PCI 주소 없이 탈착될 수 없습니다" #: src/qemu/qemu_hotplug.c:1766 #, fuzzy, c-format msgid "Underlying qemu does not support %s disk removal" msgstr "xen 버스는 %s 입력 장치를 지원하지 않음 " #: src/qemu/qemu_hotplug.c:1891 #, c-format msgid "disk controller %s:%d not found" msgstr "디스크 컨트롤러 %s:%d를 찾을 수 없음" #: src/qemu/qemu_hotplug.c:1915 #, fuzzy msgid "device cannot be detached: device is busy" msgstr "장치는 장치 별칭 없이 탈착할 수 없습니다" #: src/qemu/qemu_hotplug.c:1966 #, fuzzy, c-format msgid "cannot hot unplug multifunction PCI device: %.4x:%.2x:%.2x.%.1x" msgstr " %s macvtap 탭 장치를 열 수 없습니다" #: src/qemu/qemu_hotplug.c:2035 msgid "device cannot be detached without a device alias" msgstr "장치는 장치 별칭 없이 탈착할 수 없습니다" #: src/qemu/qemu_hotplug.c:2041 msgid "device cannot be detached with this QEMU version" msgstr "이 QEMU 버전에서는 장치를 탈착할 수 없습니다" #: src/qemu/qemu_hotplug.c:2081 #, c-format msgid "device not found in hostdevs list (%d entries)" msgstr "" #: src/qemu/qemu_hotplug.c:2135 #, c-format msgid "host pci device %.4x:%.2x:%.2x.%.1x not found" msgstr "호스트 pic 장치 %.4x:%.2x:%.2x.%.1x를 찾을 수 없음" #: src/qemu/qemu_hotplug.c:2142 #, c-format msgid "host usb device %03d.%03d not found" msgstr "호스트 usb 장치 %03d.%03d를 찾을 수 없음" #: src/qemu/qemu_hotplug.c:2146 #, fuzzy, c-format msgid "host usb device vendor=0x%.4x product=0x%.4x not found" msgstr "호스트 usb 장치 %03d.%03d를 찾을 수 없음" #: src/qemu/qemu_hotplug.c:2190 #, c-format msgid "network device %02x:%02x:%02x:%02x:%02x:%02x not found" msgstr "네트워크 장치 %02x:%02x:%02x:%02x:%02x:%02x 를 찾을 수 없음" #: src/qemu/qemu_hotplug.c:2213 #, fuzzy, c-format msgid "cannot hot unplug multifunction PCI device :%s" msgstr " %s macvtap 탭 장치를 열 수 없습니다" #: src/qemu/qemu_hotplug.c:2220 msgid "unable to determine original VLAN" msgstr "원래의 VLAN을 결정할 수 없음" #: src/qemu/qemu_hotplug.c:2285 #, fuzzy, c-format msgid "failed to remove ebtables rule on '%s'" msgstr "'%s'상의 ebtables 규칙을 제거하는 데 실패" #: src/qemu/qemu_hotplug.c:2334 msgid "Graphics password only supported for VNC" msgstr "" #: src/qemu/qemu_hotplug.c:2360 #, fuzzy msgid "Expiry of passwords is not supported" msgstr "디스크 암호 설정을 지원하지 않습니다" #: src/qemu/qemu_migration.c:168 #, fuzzy, c-format msgid "unable to read server cert %s" msgstr "서버 인증서를 검증할 수 없음: %s" #: src/qemu/qemu_migration.c:175 #, fuzzy, c-format msgid "cannot initialize cert object: %s" msgstr "뮤텍스를 초기화할 수 없습니다." #: src/qemu/qemu_migration.c:186 #, fuzzy, c-format msgid "cannot load cert data from %s: %s" msgstr "데이터를 수신할 수 없음: %s" #: src/qemu/qemu_migration.c:281 #, fuzzy msgid "Unable to obtain host UUID" msgstr "%s에 대한 cgroup을 얻을 수 없음" #: src/qemu/qemu_migration.c:302 msgid "Migration graphics data already present" msgstr "" #: src/qemu/qemu_migration.c:328 msgid "Migration lockstate data already present" msgstr "" #: src/qemu/qemu_migration.c:359 #, fuzzy msgid "Migration persistent data already present" msgstr "타겟 %s:%d가 이미 존재합니다" #: src/qemu/qemu_migration.c:478 #, fuzzy msgid "missing type attribute in migration data" msgstr "도메인 유형 특성 빠" #: src/qemu/qemu_migration.c:483 #, fuzzy, c-format msgid "unknown graphics type %s" msgstr "알려지지 않은 그래픽스 유형 '%s'" #: src/qemu/qemu_migration.c:490 #, fuzzy msgid "missing port attribute in migration data" msgstr "운영 시스템 정보 부재" #: src/qemu/qemu_migration.c:496 #, fuzzy msgid "missing tlsPort attribute in migration data" msgstr "운영 시스템 정보 부재" #: src/qemu/qemu_migration.c:502 #, fuzzy msgid "missing listen attribute in migration data" msgstr "도메인 이름 정보 부재" #: src/qemu/qemu_migration.c:539 #, fuzzy msgid "missing name element in migration data" msgstr "커널 정보 부재" #: src/qemu/qemu_migration.c:544 #, c-format msgid "Incoming cookie data had unexpected name %s vs %s" msgstr "" #: src/qemu/qemu_migration.c:554 #, fuzzy msgid "missing uuid element in migration data" msgstr "장치 정보 부재" #: src/qemu/qemu_migration.c:560 #, c-format msgid "Incoming cookie data had unexpected UUID %s vs %s" msgstr "" #: src/qemu/qemu_migration.c:568 #, fuzzy msgid "missing hostname element in migration data" msgstr "볼륨 이름 요소가 빠짐" #: src/qemu/qemu_migration.c:573 src/qemu/qemu_migration.c:590 #, c-format msgid "Attempt to migrate guest to the same host %s" msgstr "" #: src/qemu/qemu_migration.c:580 #, fuzzy msgid "missing hostuuid element in migration data" msgstr "root 장치 정보 부재" #: src/qemu/qemu_migration.c:585 #, fuzzy msgid "malformed hostuuid element in migration data" msgstr "'%s'에 대해 잘못된 형식의 uuid 요소" #: src/qemu/qemu_migration.c:606 #, fuzzy msgid "missing feature name" msgstr "CPU 특징 이름 빠짐" #: src/qemu/qemu_migration.c:612 #, fuzzy, c-format msgid "Unknown migration cookie feature %s" msgstr "알려지지 않은 CPU 특징 %s" #: src/qemu/qemu_migration.c:620 #, fuzzy, c-format msgid "Unsupported migration cookie feature %s" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/qemu/qemu_migration.c:638 #, fuzzy msgid "Missing lock driver name in migration cookie" msgstr "%s에 있는 도메인 이름 정보 부재" #: src/qemu/qemu_migration.c:650 #, fuzzy, c-format msgid "Too many domain elements in migration cookie: %d" msgstr "커널 정보 부재" #: src/qemu/qemu_migration.c:686 msgid "(qemu_migration_cookie)" msgstr "" #: src/qemu/qemu_migration.c:748 #, fuzzy msgid "Migration cookie was not NULL terminated" msgstr "이전(migration)이 활성화되지 않았습니다" #: src/qemu/qemu_migration.c:768 #, fuzzy, c-format msgid "Missing %s lock state for migration cookie" msgstr "장치의 소스 정보 부재" #: src/qemu/qemu_migration.c:775 #, c-format msgid "Source host lock driver %s different from target %s" msgstr "" #: src/qemu/qemu_migration.c:813 #, fuzzy, c-format msgid "cannot migrate domain with %d snapshots" msgstr "도메인을 다른 호스트로 이전" #: src/qemu/qemu_migration.c:822 #, fuzzy msgid "Domain with assigned host devices cannot be migrated" msgstr "도메인이 이전중 아닙니다" #: src/qemu/qemu_migration.c:856 msgid "Migration may lead to data corruption if disks use cache != none" msgstr "" #: src/qemu/qemu_migration.c:926 #, fuzzy msgid "is not active" msgstr "도메인 상태" #: src/qemu/qemu_migration.c:949 #, fuzzy msgid "unexpectedly failed" msgstr "이전(migration)이 예기치 않게 실패했습니다" #: src/qemu/qemu_migration.c:955 #, fuzzy msgid "canceled by client" msgstr "이전(migration)이 사용자에 의해 최소되었습니다" #: src/qemu/qemu_migration.c:973 src/qemu/qemu_migration.c:1948 #, fuzzy msgid "migration job" msgstr "실시간 이전" #: src/qemu/qemu_migration.c:976 #, fuzzy msgid "domain save job" msgstr "도메인 상태" #: src/qemu/qemu_migration.c:979 #, fuzzy msgid "domain core dump job" msgstr "코어 덤프한 다음 도메인을 크래시" #: src/qemu/qemu_migration.c:982 msgid "job" msgstr "" #: src/qemu/qemu_migration.c:996 #, fuzzy msgid "Lost connection to destination host" msgstr "수신지 호스트 연결 URI" #: src/qemu/qemu_migration.c:1162 #, fuzzy msgid "target domain name doesn't match source name" msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #: src/qemu/qemu_migration.c:1313 src/qemu/qemu_migration.c:2128 #, fuzzy msgid "cannot create pipe for tunnelled migration" msgstr "유닉스 소켓 '%s'를 터널링을 사용한 이전을 위해 열 수 없음" #: src/qemu/qemu_migration.c:1334 #, fuzzy msgid "cannot pass pipe for tunnelled migration" msgstr "유닉스 소켓 '%s'를 터널링을 사용한 이전을 위해 열 수 없음" #: src/qemu/qemu_migration.c:1484 msgid "" "hostname on destination resolved to localhost, but migration requires an FQDN" msgstr "" #: src/qemu/qemu_migration.c:1506 msgid "only tcp URIs are supported for KVM/QEMU migrations" msgstr "KVM/QEMU 이전에서는 tcp URI만 지원합니다" #: src/qemu/qemu_migration.c:1530 msgid "URI ended with incorrect ':port'" msgstr "URI가 바르지 않은 ':port'로 끝났습니다" #: src/qemu/qemu_migration.c:1636 msgid "poll failed in migration tunnel" msgstr "" #: src/qemu/qemu_migration.c:1654 #, fuzzy msgid "failed to read from wakeup fd" msgstr "Xen 데몬에서 읽기 실패" #: src/qemu/qemu_migration.c:1676 msgid "tunnelled migration failed to read from qemu" msgstr "터널링을 사용한 이전이 qemu에서 읽는 것을 실패했습니다" #: src/qemu/qemu_migration.c:1720 #, fuzzy msgid "Unable to make pipe" msgstr "파이프를 만들 수 없음" #: src/qemu/qemu_migration.c:1736 #, fuzzy msgid "Unable to create migration thread" msgstr "%s로의 이전을 시작할 수 없음" #: src/qemu/qemu_migration.c:1760 #, fuzzy msgid "failed to wakeup migration tunnel" msgstr "설정 파일 쓰기 실패" #: src/qemu/qemu_migration.c:1854 #, c-format msgid "Migration with lock driver %s requires cookie support" msgstr "" #: src/qemu/qemu_migration.c:1956 #, fuzzy msgid "failed to accept connection from qemu" msgstr "드라이버에서 연결을 받아들이는 데 실패" #: src/qemu/qemu_migration.c:2106 msgid "Source qemu is too old to support tunnelled migration" msgstr "원본 qemu가 너무 오래되서 터널링을 사용한 이전을 지원하지 않습니다" #: src/qemu/qemu_migration.c:2531 #, c-format msgid "Failed to connect to remote libvirt URI %s" msgstr "원격 libvirt URI %s에 대한 연결 실패" #: src/qemu/qemu_migration.c:2552 msgid "Destination libvirt does not support peer-to-peer migration protocol" msgstr "목적지 libvirt가 피어간 이전 프로토콜을 지원하지 않습니다" #: src/qemu/qemu_migration.c:2674 src/qemu/qemu_migration.c:2753 #, c-format msgid "Failed to resume guest %s after failure" msgstr "실패 후 게스트 %s를 재개하는 데 실패" #: src/qemu/qemu_migration.c:2818 #, fuzzy msgid "received unexpected cookie with P2P migration" msgstr "스트림이 예기치 못하게 종료했습니다" #: src/qemu/qemu_migration.c:2829 #, fuzzy msgid "Unexpected dconnuri parameter with non-peer2peer migration" msgstr "이전: 피어간/직접 이전에서 예기치 않은 migrateuri입니다" #: src/qemu/qemu_migration.c:2865 #, c-format msgid "Port profile Associate failed for %s" msgstr "" #: src/qemu/qemu_migration.c:2992 #, fuzzy msgid "can't get vmdef" msgstr "시간을 가져올 수 없음" #: src/qemu/qemu_migration.c:3269 #, fuzzy msgid "Unable to set cloexec flag" msgstr "모니터의 close-on-exec 플래그를 설정할 수 없음" #: src/qemu/qemu_migration.c:3363 #, c-format msgid "migration protocol going backwards %s => %s" msgstr "" #: src/qemu/qemu_migration.c:3398 #, fuzzy, c-format msgid "domain '%s' is not processing incoming migration" msgstr "도메인이 이전중 아닙니다" #: src/qemu/qemu_migration.c:3400 #, fuzzy, c-format msgid "domain '%s' is not being migrated" msgstr "도메인이 이전중 아닙니다" #: src/qemu/qemu_monitor.c:275 #, c-format msgid "Monitor path %s too big for destination" msgstr "모니터 경로 %s가 목적지에 대해 너무 긺" #: src/qemu/qemu_monitor.c:345 #, c-format msgid "Process %d %p %p [[[[%s]]][[[%s]]]" msgstr "" #: src/qemu/qemu_monitor.c:440 #, fuzzy msgid "Monitor does not support sending of file descriptors" msgstr "qemu가 파일 핸들을 보내는 것을 지원하지 않습니다: %s" #: src/qemu/qemu_monitor.c:804 msgid "Qemu monitor was closed" msgstr "" #: src/qemu/qemu_monitor.c:893 #, fuzzy msgid "Unable to unescape command" msgstr "도메인 %s에 대한 cgroup을 생성할 수 없음" #: src/qemu/qemu_monitor.c:1096 src/qemu/qemu_monitor.c:1146 #: src/qemu/qemu_monitor.c:1166 src/qemu/qemu_monitor.c:1207 #: src/qemu/qemu_monitor.c:1226 src/qemu/qemu_monitor.c:1246 #: src/qemu/qemu_monitor.c:1285 src/qemu/qemu_monitor.c:1305 #: src/qemu/qemu_monitor.c:1326 src/qemu/qemu_monitor.c:1373 #: src/qemu/qemu_monitor.c:1427 src/qemu/qemu_monitor.c:1463 #: src/qemu/qemu_monitor.c:1516 src/qemu/qemu_monitor.c:1562 #: src/qemu/qemu_monitor.c:1594 src/qemu/qemu_monitor.c:1616 #: src/qemu/qemu_monitor.c:1635 src/qemu/qemu_monitor.c:1656 #: src/qemu/qemu_monitor.c:1679 src/qemu/qemu_monitor.c:1702 #: src/qemu/qemu_monitor.c:1724 src/qemu/qemu_monitor.c:1744 #: src/qemu/qemu_monitor.c:1764 src/qemu/qemu_monitor.c:1787 #: src/qemu/qemu_monitor.c:1815 src/qemu/qemu_monitor.c:1848 #: src/qemu/qemu_monitor.c:1880 src/qemu/qemu_monitor.c:1922 #: src/qemu/qemu_monitor.c:1987 src/qemu/qemu_monitor.c:2012 #: src/qemu/qemu_monitor.c:2035 src/qemu/qemu_monitor.c:2099 #: src/qemu/qemu_monitor.c:2120 src/qemu/qemu_monitor.c:2141 #: src/qemu/qemu_monitor.c:2164 src/qemu/qemu_monitor.c:2187 #: src/qemu/qemu_monitor.c:2208 src/qemu/qemu_monitor.c:2230 #: src/qemu/qemu_monitor.c:2252 src/qemu/qemu_monitor.c:2290 #: src/qemu/qemu_monitor.c:2321 src/qemu/qemu_monitor.c:2360 #: src/qemu/qemu_monitor.c:2385 src/qemu/qemu_monitor.c:2422 #: src/qemu/qemu_monitor.c:2443 src/qemu/qemu_monitor.c:2464 #: src/qemu/qemu_monitor.c:2490 src/qemu/qemu_monitor.c:2510 #: src/qemu/qemu_monitor.c:2529 src/qemu/qemu_monitor.c:2548 #: src/qemu/qemu_monitor.c:2571 src/qemu/qemu_monitor.c:2605 #: src/qemu/qemu_monitor.c:2626 src/qemu/qemu_monitor.c:2645 #: src/qemu/qemu_monitor.c:2664 src/qemu/qemu_monitor.c:2683 #: src/qemu/qemu_monitor.c:2709 src/qemu/qemu_monitor.c:2799 #: src/qemu/qemu_monitor.c:2941 src/qemu/qemu_monitor.c:2967 msgid "monitor must not be NULL" msgstr "" #: src/qemu/qemu_monitor.c:1188 msgid "both monitor and running must not be NULL" msgstr "" #: src/qemu/qemu_monitor.c:1266 msgid "monitor || name must not be NULL" msgstr "" #: src/qemu/qemu_monitor.c:1344 #, fuzzy, c-format msgid "unknown block IO status: %s" msgstr "알려지지 않은 클럭 오프셋 '%s'" #: src/qemu/qemu_monitor.c:1403 #, fuzzy, c-format msgid "cannot find info for device '%s'" msgstr "장치 '%s'에 대한 통계를 찾을 수 없음" #: src/qemu/qemu_monitor.c:1539 #, fuzzy, c-format msgid "unsupported protocol type %s" msgstr "지원하지 않는 프로토콜 패밀리 '%s'" #: src/qemu/qemu_monitor.c:1928 #, c-format msgid "file offset must be a multiple of %llu" msgstr "" #: src/qemu/qemu_monitor.c:2044 #, fuzzy msgid "dump-guest-memory is not supported in text mode" msgstr "JSON 모드에서 query-pci를 지원하지 않음" #: src/qemu/qemu_monitor.c:2258 msgid "fd must be valid" msgstr "" #: src/qemu/qemu_monitor.c:2264 #, c-format msgid "qemu is not using a unix socket monitor, cannot send fd %s" msgstr "" #: src/qemu/qemu_monitor.c:2719 msgid "text monitor lacks several snapshot features" msgstr "" #: src/qemu/qemu_monitor.c:2739 msgid "transaction requires JSON monitor" msgstr "" #: src/qemu/qemu_monitor.c:2830 #, c-format msgid "bandwidth must be less than %llu" msgstr "" #: src/qemu/qemu_monitor.c:2841 msgid "block jobs require JSON monitor" msgstr "" #: src/qemu/qemu_monitor.c:2973 msgid "JSON monitor is required" msgstr "" #: src/qemu/qemu_monitor_json.c:241 #, fuzzy msgid "Unable to append command 'id' string" msgstr "QEMU 명령 '%s'를 실행할 수 없음 : %s" #: src/qemu/qemu_monitor_json.c:438 #, fuzzy, c-format msgid "argument key '%s' must not have null value" msgstr "비밀정보 '%s'는 값을 가지고 있지 않습니다" #: src/qemu/qemu_monitor_json.c:542 #, fuzzy, c-format msgid "unexpected empty keyword in %s" msgstr "예기치 못한 특성 %s" #: src/qemu/qemu_monitor_json.c:916 #, fuzzy msgid "human monitor command was missing return data" msgstr "정보 이전 응답에 반환 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1157 #, fuzzy msgid "query-status reply was missing return data" msgstr "cpu 응답에 반환 데이터가 빠졌습니다" #: src/qemu/qemu_monitor_json.c:1163 #, fuzzy msgid "query-status reply was missing running state" msgstr "cpu 응답에 반환 데이터가 빠졌습니다" #: src/qemu/qemu_monitor_json.c:1260 msgid "cpu reply was missing return data" msgstr "cpu 응답에 반환 데이터가 빠졌습니다" #: src/qemu/qemu_monitor_json.c:1266 msgid "cpu information was not an array" msgstr "cpu 정보가 배열이 아니었습니다" #: src/qemu/qemu_monitor_json.c:1272 msgid "cpu information was empty" msgstr "cpu 정보가 비어있었습니다" #: src/qemu/qemu_monitor_json.c:1287 src/qemu/qemu_monitor_json.c:2853 #, fuzzy msgid "character device information was missing array element" msgstr "문자 장치 정보에 배열 원소가 빠져있습니다" #: src/qemu/qemu_monitor_json.c:1293 msgid "cpu information was missing cpu number" msgstr "cpu 정보에 cpu 번호가 빠졌습니다" #: src/qemu/qemu_monitor_json.c:1306 #, c-format msgid "unexpected cpu index %d expecting %d" msgstr "예기치 못한 cpu 인덱스 %d 기대값 %d" #: src/qemu/qemu_monitor_json.c:1375 #, fuzzy msgid "info kvm reply was missing return data" msgstr "정보 이전 응답에 반환 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1382 #, fuzzy msgid "info kvm reply missing 'running' field" msgstr "정보 이전 응답에 반환 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1432 src/qemu/qemu_monitor_json.c:1487 msgid "info balloon reply was missing return data" msgstr "정보 풍선 응답에 반환 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1439 msgid "info balloon reply was missing balloon data" msgstr "정보 풍선 응답에 풍선 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1495 #, fuzzy msgid "info balloon reply was missing balloon actual" msgstr "정보 풍선 응답에 풍선 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1507 #, fuzzy msgid "info balloon reply was missing balloon mem_swapped_in" msgstr "정보 풍선 응답에 풍선 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1518 #, fuzzy msgid "info balloon reply was missing balloon mem_swapped_out" msgstr "정보 풍선 응답에 풍선 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1529 #, fuzzy msgid "info balloon reply was missing balloon major_page_faults" msgstr "정보 풍선 응답에 풍선 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1540 #, fuzzy msgid "info balloon reply was missing balloon minor_page_faults" msgstr "정보 풍선 응답에 풍선 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1551 #, fuzzy msgid "info balloon reply was missing balloon free_mem" msgstr "정보 풍선 응답에 풍선 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1562 #, fuzzy msgid "info balloon reply was missing balloon total_mem" msgstr "정보 풍선 응답에 풍선 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1608 #, fuzzy msgid "block info reply was missing device list" msgstr "blockstats 응답에 장치 목록이 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1620 src/qemu/qemu_monitor_json.c:1626 #, fuzzy msgid "block info device entry was not in expected format" msgstr "blockstats 장치 엔트리가 원하는 형식이 아니었습니다" #: src/qemu/qemu_monitor_json.c:1645 src/qemu/qemu_monitor_json.c:1652 #, fuzzy, c-format msgid "cannot read %s value" msgstr "%s를 읽을 수 없음" #: src/qemu/qemu_monitor_json.c:1726 src/qemu/qemu_monitor_json.c:1865 #: src/qemu/qemu_monitor_json.c:1940 msgid "blockstats reply was missing device list" msgstr "blockstats 응답에 장치 목록이 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:1736 src/qemu/qemu_monitor_json.c:1742 #: src/qemu/qemu_monitor_json.c:1873 src/qemu/qemu_monitor_json.c:1951 #: src/qemu/qemu_monitor_json.c:1957 msgid "blockstats device entry was not in expected format" msgstr "blockstats 장치 엔트리가 원하는 형식이 아니었습니다" #: src/qemu/qemu_monitor_json.c:1760 src/qemu/qemu_monitor_json.c:1880 #: src/qemu/qemu_monitor_json.c:1982 msgid "blockstats stats entry was not in expected format" msgstr "blockstats 상태 엔트리가 원하는 형식이 아니었습니다" #: src/qemu/qemu_monitor_json.c:1766 src/qemu/qemu_monitor_json.c:1772 #: src/qemu/qemu_monitor_json.c:1781 src/qemu/qemu_monitor_json.c:1787 #: src/qemu/qemu_monitor_json.c:1793 src/qemu/qemu_monitor_json.c:1802 #: src/qemu/qemu_monitor_json.c:1811 src/qemu/qemu_monitor_json.c:1820 #: src/qemu/qemu_monitor_json.c:1988 #, c-format msgid "cannot read %s statistic" msgstr "%s 통계를 읽을 수 없음" #: src/qemu/qemu_monitor_json.c:1828 src/qemu/qemu_monitor_json.c:1996 #, c-format msgid "cannot find statistics for device '%s'" msgstr "장치 '%s'에 대한 통계를 찾을 수 없음" #: src/qemu/qemu_monitor_json.c:1975 #, fuzzy msgid "blockstats parent entry was not in expected format" msgstr "blockstats 상태 엔트리가 원하는 형식이 아니었습니다" #: src/qemu/qemu_monitor_json.c:2377 msgid "info migration reply was missing return data" msgstr "정보 이전 응답에 반환 데이터가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:2383 msgid "info migration reply was missing return status" msgstr "정보 이전 응답에 반환 상태가 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:2389 src/qemu/qemu_monitor_text.c:1567 #: src/qemu/qemu_monitor_text.c:1574 #, c-format msgid "unexpected migration status in %s" msgstr "%s에 예기치 못한 이전 상태" #: src/qemu/qemu_monitor_json.c:2397 msgid "migration was active, but no RAM info was set" msgstr "이전이 작동입니다만, RAM 정보가 설정되지 않았습니다" #: src/qemu/qemu_monitor_json.c:2404 msgid "migration was active, but RAM 'transferred' data was missing" msgstr "이전이 작동중이지만, RAM에 '전송된' 데이터를 잃어버렸습니다" #: src/qemu/qemu_monitor_json.c:2410 msgid "migration was active, but RAM 'remaining' data was missing" msgstr "이전이 작동중이지만, RAM '남아있는' 데이터를 잃어버렸습니다" #: src/qemu/qemu_monitor_json.c:2416 msgid "migration was active, but RAM 'total' data was missing" msgstr "이전이 작동중이지만, RAM '전체' 데이터를 잃어버렸습니다" #: src/qemu/qemu_monitor_json.c:2428 #, fuzzy msgid "disk migration was active, but 'transferred' data was missing" msgstr "이전이 작동중이지만, RAM에 '전송된' 데이터를 잃어버렸습니다" #: src/qemu/qemu_monitor_json.c:2435 #, fuzzy msgid "disk migration was active, but 'remaining' data was missing" msgstr "이전이 작동중이지만, RAM '남아있는' 데이터를 잃어버렸습니다" #: src/qemu/qemu_monitor_json.c:2442 #, fuzzy msgid "disk migration was active, but 'total' data was missing" msgstr "이전이 작동중이지만, RAM '전체' 데이터를 잃어버렸습니다" #: src/qemu/qemu_monitor_json.c:2605 src/qemu/qemu_monitor_json.c:2615 #: src/qemu/qemu_monitor_json.c:2625 #, fuzzy msgid "usb_add not supported in JSON mode" msgstr "JSON 모드에서 query-pci를 지원하지 않음" #: src/qemu/qemu_monitor_json.c:2635 src/qemu/qemu_monitor_json.c:2646 #: src/qemu/qemu_monitor_json.c:2656 src/qemu/qemu_monitor_json.c:2922 #, fuzzy msgid "pci_add not supported in JSON mode" msgstr "JSON 모드에서 query-pci를 지원하지 않음" #: src/qemu/qemu_monitor_json.c:2665 #, fuzzy msgid "pci_del not supported in JSON mode" msgstr "JSON 모드에서 query-pci를 지원하지 않음" #: src/qemu/qemu_monitor_json.c:2837 msgid "character device reply was missing return data" msgstr "문자 장치 응답에 반환 데이터가 빠졌습니다" #: src/qemu/qemu_monitor_json.c:2843 msgid "character device information was not an array" msgstr "문자 장치 정보가 배열이 아닙니다" #: src/qemu/qemu_monitor_json.c:2859 src/qemu/qemu_monitor_json.c:2865 msgid "character device information was missing filename" msgstr "문자 장치 정보에 파일명이 빠졌습니다" #: src/qemu/qemu_monitor_json.c:2878 src/qemu/qemu_monitor_text.c:2424 #, c-format msgid "failed to save chardev path '%s'" msgstr "chardev 경로 '%s'를 저장하는 데 실패" #: src/qemu/qemu_monitor_json.c:2936 msgid "drive_add reply was missing device address" msgstr "dirve_add 응답에 장치 주소가 빠졌습니다" #: src/qemu/qemu_monitor_json.c:2942 msgid "drive_add reply was missing device bus number" msgstr "dirve_add 응답에 장치 버스 번호가 빠졌습니다" #: src/qemu/qemu_monitor_json.c:2948 msgid "drive_add reply was missing device unit number" msgstr "dirve_add 응답에 장치 유니트 번호가 빠졌습니다" #: src/qemu/qemu_monitor_json.c:2999 #, fuzzy msgid "query-pci not supported in JSON mode" msgstr "JSON 모드에서 query-pci를 지원하지 않음" #: src/qemu/qemu_monitor_json.c:3118 msgid "" "deleting disk is not supported. This may leak data if disk is reassigned" msgstr "" #: src/qemu/qemu_monitor_json.c:3345 msgid "" "HMP passthrough is not supported by qemu process; only QMP commands can be " "used" msgstr "" #: src/qemu/qemu_monitor_json.c:3445 #, fuzzy msgid "entry was missing 'device'" msgstr "blockstats 응답에 장치 목록이 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:3454 #, fuzzy msgid "entry was missing 'type'" msgstr "제품 빠짐" #: src/qemu/qemu_monitor_json.c:3464 msgid "entry was missing 'speed'" msgstr "" #: src/qemu/qemu_monitor_json.c:3471 msgid "entry was missing 'offset'" msgstr "" #: src/qemu/qemu_monitor_json.c:3477 #, fuzzy msgid "entry was missing 'len'" msgstr "cpu 응답에 반환 데이터가 빠졌습니다" #: src/qemu/qemu_monitor_json.c:3499 #, fuzzy msgid "reply was missing return data" msgstr "cpu 응답에 반환 데이터가 빠졌습니다" #: src/qemu/qemu_monitor_json.c:3505 #, fuzzy msgid "unrecognized format of block job information" msgstr "도메인 작업 정보" #: src/qemu/qemu_monitor_json.c:3511 #, fuzzy msgid "unable to determine array size" msgstr "원래의 VLAN을 결정할 수 없음" #: src/qemu/qemu_monitor_json.c:3519 #, fuzzy msgid "missing array element" msgstr "용량 요소가 빠짐" #: src/qemu/qemu_monitor_json.c:3547 #, fuzzy, c-format msgid "only modern block pull supports base: %s" msgstr "알려지지 않은 클럭 오프셋 '%s'" #: src/qemu/qemu_monitor_json.c:3552 #, fuzzy, c-format msgid "only modern block pull supports speed: %llu" msgstr "알려지지 않은 클럭 오프셋 '%s'" #: src/qemu/qemu_monitor_json.c:3597 src/qemu/qemu_monitor_json.c:3761 #: src/qemu/qemu_monitor_json.c:3794 #, fuzzy, c-format msgid "No active operation on device: %s" msgstr "장치 %s에 대해 할당된 pty가 없음" #: src/qemu/qemu_monitor_json.c:3601 #, fuzzy, c-format msgid "Device %s in use" msgstr "장치 %s가 리셋됨\n" #: src/qemu/qemu_monitor_json.c:3604 src/qemu/qemu_monitor_json.c:3764 #: src/qemu/qemu_monitor_json.c:3797 #, fuzzy, c-format msgid "Operation is not supported for device: %s" msgstr "%s 장치에 대해 이동식 미디어가 지원되지 않음" #: src/qemu/qemu_monitor_json.c:3608 src/qemu/qemu_monitor_text.c:3350 #: src/qemu/qemu_monitor_text.c:3456 #, fuzzy, c-format msgid "Command '%s' is not found" msgstr "도메인을 찾을 수 없음" #: src/qemu/qemu_monitor_json.c:3611 src/qemu/qemu_monitor_json.c:3767 #: src/qemu/qemu_monitor_json.c:3800 #, fuzzy msgid "Unexpected error" msgstr "예기치 못한 풀 유형" #: src/qemu/qemu_monitor_json.c:3656 #, fuzzy, c-format msgid "block_io_throttle field '%s' missing in qemu's output" msgstr "blockstats 응답에 장치 목록이 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:3675 #, fuzzy msgid " block_io_throttle reply was missing device list" msgstr "blockstats 응답에 장치 목록이 빠져있었습니다" #: src/qemu/qemu_monitor_json.c:3686 src/qemu/qemu_monitor_json.c:3693 #, fuzzy msgid "block_io_throttle device entry was not in expected format" msgstr "blockstats 장치 엔트리가 원하는 형식이 아니었습니다" #: src/qemu/qemu_monitor_json.c:3708 #, fuzzy msgid "block_io_throttle inserted entry was not in expected format" msgstr "blockstats 장치 엔트리가 원하는 형식이 아니었습니다" #: src/qemu/qemu_monitor_json.c:3725 #, fuzzy, c-format msgid "cannot find throttling info for device '%s'" msgstr "장치 '%s'에 대한 통계를 찾을 수 없음" #: src/qemu/qemu_monitor_text.c:177 #, fuzzy msgid "Password request seen, but no handler available" msgstr "args 구문 분석에 실패했습니다" #: src/qemu/qemu_monitor_text.c:325 #, fuzzy, c-format msgid "Unable to extract disk path from %s" msgstr "모니터 경로 %s를 열 수 없음" #: src/qemu/qemu_monitor_text.c:393 msgid "cannot stop CPU execution" msgstr "CPU 실행을 중단할 수 없음" #: src/qemu/qemu_monitor_text.c:414 #, fuzzy msgid "cannot get status info" msgstr "VCPU 정보를 얻을 수 없음" #: src/qemu/qemu_monitor_text.c:437 #, fuzzy, c-format msgid "unexpected reply from info status: %s" msgstr "%s에 예기치 못한 이전 상태" #: src/qemu/qemu_monitor_text.c:454 msgid "system shutdown operation failed" msgstr "시스템 종료 동작이 실패했습니다" #: src/qemu/qemu_monitor_text.c:478 #, fuzzy msgid "set_link operation failed" msgstr "일시정지 동작이 실패했습니다" #: src/qemu/qemu_monitor_text.c:486 #, fuzzy msgid "'set_link' not supported by this qemu" msgstr "이 qemu에서는 'info blockstats'를 지원하지 않습니다" #: src/qemu/qemu_monitor_text.c:493 #, fuzzy msgid "device name rejected" msgstr "너무 많은 장치 이름이 요청됨" #: src/qemu/qemu_monitor_text.c:513 #, fuzzy msgid "system reset operation failed" msgstr "시스템 종료 동작이 실패했습니다" #: src/qemu/qemu_monitor_text.c:532 msgid "cannot run monitor command to fetch CPU thread info" msgstr "CPU 쓰레드 정보를 가져오기 위한 모니터 명령을 실행할 수 없음" #: src/qemu/qemu_monitor_text.c:613 #, fuzzy msgid "could not query kvm status" msgstr "도메인 상태를 얻는 데 실패" #: src/qemu/qemu_monitor_text.c:720 msgid "could not query memory balloon allocation" msgstr "메모리 풍선 할당을 질의할 수 없음" #: src/qemu/qemu_monitor_text.c:730 src/qemu/qemu_monitor_text.c:736 #, fuzzy, c-format msgid "unexpected balloon information '%s'" msgstr "예기치 못한 사운드 모델 %d" #: src/qemu/qemu_monitor_text.c:764 msgid "could not query memory balloon statistics" msgstr "메모리 풍선 통계를 질의할 수 없음" #: src/qemu/qemu_monitor_text.c:791 #, fuzzy msgid "info block command failed" msgstr "'info blockstats' 명령이 실패했습니다" #: src/qemu/qemu_monitor_text.c:798 #, fuzzy msgid "info block not supported by this qemu" msgstr "이 qemu에서는 'info blockstats'를 지원하지 않습니다" #: src/qemu/qemu_monitor_text.c:910 src/qemu/qemu_monitor_text.c:1037 msgid "'info blockstats' command failed" msgstr "'info blockstats' 명령이 실패했습니다" #: src/qemu/qemu_monitor_text.c:922 src/qemu/qemu_monitor_text.c:1049 msgid "'info blockstats' not supported by this qemu" msgstr "이 qemu에서는 'info blockstats'를 지원하지 않습니다" #: src/qemu/qemu_monitor_text.c:1020 #, c-format msgid "no stats found for device %s" msgstr "장치 %s에 대한 stat을 찾을 수 없습니다" #: src/qemu/qemu_monitor_text.c:1100 msgid "unable to query block extent with this QEMU" msgstr "" #: src/qemu/qemu_monitor_text.c:1121 #, fuzzy msgid "failed to resize block" msgstr "소켓 생성 실패" #: src/qemu/qemu_monitor_text.c:1177 msgid "setting VNC password failed" msgstr "VNC 암호 설정이 실패했습니다" #: src/qemu/qemu_monitor_text.c:1202 #, fuzzy msgid "setting password failed" msgstr "VNC 암호 설정이 실패했습니다" #: src/qemu/qemu_monitor_text.c:1236 #, fuzzy msgid "expiring password failed" msgstr "VNC 암호 설정이 실패했습니다" #: src/qemu/qemu_monitor_text.c:1275 msgid "could not balloon memory allocation" msgstr "풍선 메모리 할당을 할 수 없습니다" #: src/qemu/qemu_monitor_text.c:1312 #, fuzzy msgid "could not change CPU online status" msgstr "CPU 온라인 상태를 변경할 수 없음" #: src/qemu/qemu_monitor_text.c:1347 #, c-format msgid "could not eject media on %s" msgstr "%s상의 매체를 꺼내기할 수 없음" #: src/qemu/qemu_monitor_text.c:1356 #, c-format msgid "could not eject media on %s: %s" msgstr "%s상의 매체를 꺼내기할 수 없음: %s" #: src/qemu/qemu_monitor_text.c:1391 #, fuzzy, c-format msgid "could not change media on %s" msgstr "%s상의 매체를 꺼내기할 수 없음: %s" #: src/qemu/qemu_monitor_text.c:1400 src/qemu/qemu_monitor_text.c:1407 #, fuzzy, c-format msgid "could not change media on %s: %s" msgstr "%s상의 매체를 꺼내기할 수 없음: %s" #: src/qemu/qemu_monitor_text.c:1443 #, c-format msgid "could not save memory region to '%s'" msgstr "메모리 영역을 '%s'에 저장할 수 없음" #: src/qemu/qemu_monitor_text.c:1490 msgid "could not restrict migration speed" msgstr "이전 속도를 제한할 수 없음" #: src/qemu/qemu_monitor_text.c:1517 msgid "could not set maximum migration downtime" msgstr "최대 이전 다운타임을 설정할 수 없음" #: src/qemu/qemu_monitor_text.c:1558 msgid "cannot query migration status" msgstr "이전(migration) 상태를 질의할 수 없음" #: src/qemu/qemu_monitor_text.c:1587 #, c-format msgid "cannot parse migration data transferred statistic %s" msgstr "전송된 이전 데이터 통계 %s를 구문분석할 수 없음" #: src/qemu/qemu_monitor_text.c:1600 #, c-format msgid "cannot parse migration data remaining statistic %s" msgstr "잔여 이전 데이터 통계 %s를 구문분석할 수 없음" #: src/qemu/qemu_monitor_text.c:1613 #, c-format msgid "cannot parse migration data total statistic %s" msgstr "전체 이전 데이터 통계 %s를 구문분석할 수 없음" #: src/qemu/qemu_monitor_text.c:1629 #, fuzzy, c-format msgid "cannot parse disk migration data transferred statistic %s" msgstr "전송된 이전 데이터 통계 %s를 구문분석할 수 없음" #: src/qemu/qemu_monitor_text.c:1642 #, fuzzy, c-format msgid "cannot parse disk migration data remaining statistic %s" msgstr "잔여 이전 데이터 통계 %s를 구문분석할 수 없음" #: src/qemu/qemu_monitor_text.c:1655 #, fuzzy, c-format msgid "cannot parse disk migration data total statistic %s" msgstr "전체 이전 데이터 통계 %s를 구문분석할 수 없음" #: src/qemu/qemu_monitor_text.c:1709 #, c-format msgid "unable to start migration to %s" msgstr "%s로의 이전을 시작할 수 없음" #: src/qemu/qemu_monitor_text.c:1716 #, c-format msgid "migration to '%s' failed: %s" msgstr "'%s'로의 이전이 실패: %s" #: src/qemu/qemu_monitor_text.c:1723 #, c-format msgid "migration to '%s' not supported by this qemu: %s" msgstr "'%s'로의 이전이 본 qemu에 의해 지원되지 않음: %s" #: src/qemu/qemu_monitor_text.c:1744 msgid "cannot run monitor command to cancel migration" msgstr "이전을 취소하기 위한 모니터 명령을 실행할 수 없음" #: src/qemu/qemu_monitor_text.c:1773 #, fuzzy msgid "cannot run monitor command to relocate graphics client" msgstr "이전을 취소하기 위한 모니터 명령을 실행할 수 없음" #: src/qemu/qemu_monitor_text.c:1804 msgid "cannot run monitor command to add usb disk" msgstr "usb 디스크를 추가 하기 위한 모니터 명령을 실행할 수 없음" #: src/qemu/qemu_monitor_text.c:1812 #, c-format msgid "unable to add USB disk %s: %s" msgstr "USB 디스크 %s를 추가할 수 없음: %s" #: src/qemu/qemu_monitor_text.c:1840 msgid "cannot attach usb device" msgstr "usb 장치를 부탁할 수 없음" #: src/qemu/qemu_monitor_text.c:1848 msgid "adding usb device failed" msgstr "usb 장치 추가가 실패했습니다" #: src/qemu/qemu_monitor_text.c:1981 msgid "cannot attach host pci device" msgstr "호스트 pci 장치를 부착할 수 없음" #: src/qemu/qemu_monitor_text.c:1993 src/qemu/qemu_monitor_text.c:2080 #, c-format msgid "parsing pci_add reply failed: %s" msgstr "pci_add 응답의 구문 분석이 실패: %s" #: src/qemu/qemu_monitor_text.c:2032 #, c-format msgid "cannot attach %s disk %s" msgstr "%s 디스크 %s를 부착할 수 없음" #: src/qemu/qemu_monitor_text.c:2045 #, c-format msgid "adding %s disk failed %s: %s" msgstr "%s 디스크 추가가 실패 %s: %s" #: src/qemu/qemu_monitor_text.c:2074 #, c-format msgid "failed to add NIC with '%s'" msgstr "NIC를 추가하는 데 실패 '%s'" #: src/qemu/qemu_monitor_text.c:2118 msgid "failed to remove PCI device" msgstr "PCI 장치를 제거하는 데 실패" #: src/qemu/qemu_monitor_text.c:2137 #, c-format msgid "failed to detach PCI device, invalid address %.4x:%.2x:%.2x: %s" msgstr "PCI 장치를 탈착하는 데 실패, 잘못된 주소 %.4x:%.2x:%.2x: %s" #: src/qemu/qemu_monitor_text.c:2166 #, c-format msgid "failed to pass fd to qemu with '%s'" msgstr "fd를 qemu에 전달하는 데 실패 '%s'" #: src/qemu/qemu_monitor_text.c:2174 #, c-format msgid "qemu does not support sending of file handles: %s" msgstr "qemu가 파일 핸들을 보내는 것을 지원하지 않습니다: %s" #: src/qemu/qemu_monitor_text.c:2181 #, fuzzy, c-format msgid "unable to send file handle '%s': %s" msgstr "설정 파일 핸들을 저장하는 데 실패했습니다." #: src/qemu/qemu_monitor_text.c:2209 #, c-format msgid "failed to close fd in qemu with '%s'" msgstr "qemu에서 fd를 닫는 데 실패 '%s'" #: src/qemu/qemu_monitor_text.c:2217 #, c-format msgid "qemu does not support closing of file handles: %s" msgstr "qemu가 파일 핸들을 닫는 것을 지원하지 않습니다: %s" #: src/qemu/qemu_monitor_text.c:2245 #, fuzzy, c-format msgid "failed to add host net with '%s'" msgstr "NIC를 추가하는 데 실패 '%s'" #: src/qemu/qemu_monitor_text.c:2251 #, fuzzy, c-format msgid "unable to add host net: %s" msgstr "USB 디스크 %s를 추가할 수 없음: %s" #: src/qemu/qemu_monitor_text.c:2280 #, c-format msgid "failed to remove host network in qemu with '%s'" msgstr "qemu에서 fd를 닫는 데 실패 '%s'" #: src/qemu/qemu_monitor_text.c:2309 #, fuzzy, c-format msgid "failed to add netdev with '%s'" msgstr "NIC를 추가하는 데 실패 '%s'" #: src/qemu/qemu_monitor_text.c:2338 #, fuzzy, c-format msgid "failed to remove netdev in qemu with '%s'" msgstr "qemu에서 fd를 닫는 데 실패 '%s'" #: src/qemu/qemu_monitor_text.c:2373 msgid "failed to retrieve chardev info in qemu with 'info chardev'" msgstr "chardev 정보를 qemu에서 'info chardev'로 가져오는 데 실패" #: src/qemu/qemu_monitor_text.c:2458 #, c-format msgid "cannot attach %s disk controller" msgstr "%s 디스크 컨트롤러를 부착할 수 없음" #: src/qemu/qemu_monitor_text.c:2471 #, c-format msgid "adding %s disk controller failed: %s" msgstr "%s 디스크 컨트롤러를 추가하는 데 실패: %s" #: src/qemu/qemu_monitor_text.c:2557 #, fuzzy, c-format msgid "failed to attach drive '%s'" msgstr "디스크 부착 성공" #: src/qemu/qemu_monitor_text.c:2563 src/qemu/qemu_monitor_text.c:2840 #, fuzzy msgid "drive hotplug is not supported" msgstr "cpu 친밀도(affinity)가 지원되지 않습니다" #: src/qemu/qemu_monitor_text.c:2575 #, c-format msgid "adding %s disk failed: %s" msgstr "%s 디스크 추가 실패: %s" #: src/qemu/qemu_monitor_text.c:2630 #, c-format msgid "cannot parse value for %s" msgstr "%s의 값 구문 분석 실패" #: src/qemu/qemu_monitor_text.c:2648 msgid "cannot query PCI addresses" msgstr "PCI 주소를 질의할 수 없음" #: src/qemu/qemu_monitor_text.c:2741 #, c-format msgid "cannot detach %s device" msgstr "%s 장치를 탈착할 수 없음" #: src/qemu/qemu_monitor_text.c:2747 #, c-format msgid "detaching %s device failed: %s" msgstr "%s 장치 탈착이 실패했습니다: %s" #: src/qemu/qemu_monitor_text.c:2781 #, c-format msgid "cannot attach %s device" msgstr "%s 장치를 부착할 수 없음" #: src/qemu/qemu_monitor_text.c:2797 #, fuzzy, c-format msgid "adding %s device failed: %s" msgstr "%s 장치 추가에 실패했습니다" #: src/qemu/qemu_monitor_text.c:2834 #, fuzzy, c-format msgid "failed to add drive '%s'" msgstr "'%s' 파일 읽기 실패" #: src/qemu/qemu_monitor_text.c:2846 #, fuzzy msgid "open disk image file failed" msgstr "popen 실패" #: src/qemu/qemu_monitor_text.c:2882 #, fuzzy, c-format msgid "cannot delete %s drive" msgstr "%s 장치를 탈착할 수 없음" #: src/qemu/qemu_monitor_text.c:2887 msgid "" "deleting drive is not supported. This may leak data if disk is reassigned" msgstr "" #: src/qemu/qemu_monitor_text.c:2899 #, fuzzy, c-format msgid "deleting %s drive failed: %s" msgstr "%s 장치 탈착이 실패했습니다: %s" #: src/qemu/qemu_monitor_text.c:2935 #, fuzzy msgid "failed to set disk password" msgstr "소켓 주소를 얻는 데 실패" #: src/qemu/qemu_monitor_text.c:2941 msgid "setting disk password is not supported" msgstr "디스크 암호 설정을 지원하지 않습니다" #: src/qemu/qemu_monitor_text.c:2945 msgid "the disk password is incorrect" msgstr "디스크 암호가 잘못되었습니다" #: src/qemu/qemu_monitor_text.c:2973 src/qemu/qemu_monitor_text.c:3125 #, fuzzy, c-format msgid "failed to take snapshot using command '%s'" msgstr "명령어 '%s'를 기다리는 데 실패" #: src/qemu/qemu_monitor_text.c:2979 src/qemu/qemu_monitor_text.c:3132 #, fuzzy, c-format msgid "Failed to take snapshot: %s" msgstr "경로 %s를 만드는 데 실패" #: src/qemu/qemu_monitor_text.c:2984 msgid "this domain does not have a device to take snapshots" msgstr "" #: src/qemu/qemu_monitor_text.c:3021 #, fuzzy, c-format msgid "failed to restore snapshot using command '%s'" msgstr "명령어 '%s'를 기다리는 데 실패" #: src/qemu/qemu_monitor_text.c:3028 msgid "this domain does not have a device to load snapshots" msgstr "" #: src/qemu/qemu_monitor_text.c:3033 #, fuzzy, c-format msgid "the snapshot '%s' does not exist, and was not loaded" msgstr "템플릿 '%s'는 존재하지 않습니다" #: src/qemu/qemu_monitor_text.c:3079 #, fuzzy, c-format msgid "failed to delete snapshot using command '%s'" msgstr "명령어 '%s'를 기다리는 데 실패" #: src/qemu/qemu_monitor_text.c:3086 msgid "this domain does not have a device to delete snapshots" msgstr "" #: src/qemu/qemu_monitor_text.c:3163 #, fuzzy, c-format msgid "failed to run cmd '%s'" msgstr "'%s' 읽기 실패" #: src/qemu/qemu_monitor_text.c:3193 #, fuzzy, c-format msgid "failed to inject NMI using command '%s'" msgstr "명령어 '%s'를 기다리는 데 실패" #: src/qemu/qemu_monitor_text.c:3215 #, c-format msgid "keycode %d is invalid: 0x%X" msgstr "" #: src/qemu/qemu_monitor_text.c:3237 #, fuzzy, c-format msgid "failed to send key using command '%s'" msgstr "명령어 '%s'를 기다리는 데 실패" #: src/qemu/qemu_monitor_text.c:3244 #, fuzzy, c-format msgid "failed to send key '%s'" msgstr "'%s' 생성 실패" #: src/qemu/qemu_monitor_text.c:3270 #, fuzzy msgid "taking screenshot failed" msgstr "VNC 암호 설정이 실패했습니다" #: src/qemu/qemu_monitor_text.c:3304 #, fuzzy msgid "adding graphics client failed" msgstr "usb 장치 추가가 실패했습니다" #: src/qemu/qemu_monitor_text.c:3343 src/qemu/qemu_monitor_text.c:3449 #, fuzzy msgid "cannot run monitor command" msgstr "모니터 명령 '%s'를 보낼 수 없음" #: src/qemu/qemu_monitor_text.c:3433 #, fuzzy, c-format msgid "No info for device '%s'" msgstr "장치 %s에 대한 stat을 찾을 수 없습니다" #: src/qemu/qemu_process.c:221 #, fuzzy, c-format msgid "Failed to set security context for agent for %s" msgstr "%s에 대한 모니터연결 실패" #: src/qemu/qemu_process.c:244 #, fuzzy, c-format msgid "Failed to clear security context for agent for %s" msgstr "%s에 대한 모니터연결 실패" #: src/qemu/qemu_process.c:371 #, c-format msgid "no disk found with path %s" msgstr "경로 %s에 대한 디스크를 찾지 못했습니다" #: src/qemu/qemu_process.c:394 #, fuzzy, c-format msgid "no disk found with alias %s" msgstr "경로 %s에 대한 디스크를 찾지 못했습니다" #: src/qemu/qemu_process.c:414 #, c-format msgid "disk %s does not have any encryption information" msgstr "디스크 %s가 암호화 정보를 가지고 있지 않습니다" #: src/qemu/qemu_process.c:422 msgid "cannot find secrets without a connection" msgstr "연결 없으 비밀 정보를 찾을 수 없습니다" #: src/qemu/qemu_process.c:430 src/storage/storage_backend.c:469 msgid "secret storage not supported" msgstr "비밀 저장소를 지원하지 않습니다" #: src/qemu/qemu_process.c:439 #, c-format msgid "invalid for volume %s" msgstr "볼륨 %s에 대해 잘못된 " #: src/qemu/qemu_process.c:457 #, c-format msgid "format='qcow' passphrase for %s must not contain a '\\0'" msgstr "format='qcow'. %s를 위한 암호구는 '\\0'를 포함해서는 안됩니다." #: src/qemu/qemu_process.c:618 #, fuzzy msgid "Failed to create reboot thread, killing domain" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/qemu/qemu_process.c:1207 #, fuzzy, c-format msgid "Failed to set security context for monitor for %s" msgstr "%s에 대한 모니터연결 실패" #: src/qemu/qemu_process.c:1239 #, fuzzy, c-format msgid "Failed to clear security context for monitor for %s" msgstr "%s에 대한 모니터연결 실패" #: src/qemu/qemu_process.c:1305 #, c-format msgid "Failure while reading %s log output" msgstr "%s 로그 출력을 읽는 데 실패" #: src/qemu/qemu_process.c:1327 #, c-format msgid "Out of space while reading %s log output: %s" msgstr "%s 로그 출력을 읽는 중 메모리 꽉 참: %s" #: src/qemu/qemu_process.c:1334 #, c-format msgid "Process exited while reading %s log output: %s" msgstr "%s 로그 출력을 읽는 중 프로세스가 종료 됨: %s" #: src/qemu/qemu_process.c:1349 #, c-format msgid "Timed out while reading %s log output: %s" msgstr "%s 로그 출력을 읽는 중 타임 아웃 : %s" #: src/qemu/qemu_process.c:1436 #, c-format msgid "no assigned pty for device %s" msgstr "장치 %s에 대해 할당된 pty가 없음" #: src/qemu/qemu_process.c:1628 #, fuzzy, c-format msgid "process exited while connecting to monitor: %s" msgstr "%s 로그 출력을 읽는 중 프로세스가 종료 됨: %s" #: src/qemu/qemu_process.c:1775 #, fuzzy msgid "Invalid mode for memory NUMA tuning." msgstr "메모리 크기에 대해 %d의 잘못된 값" #: src/qemu/qemu_process.c:1791 msgid "libvirt is compiled without NUMA tuning support" msgstr "" #: src/qemu/qemu_process.c:1815 #, fuzzy msgid "Failed to query numad for the advisory nodeset" msgstr "NUMA 가용 메모리 질의 실패" #: src/qemu/qemu_process.c:1826 #, fuzzy msgid "numad is not available on this host" msgstr "이 플랫폼에 사용 가능한 NUMA 메모리 정보가 없음" #: src/qemu/qemu_process.c:1921 #, fuzzy msgid "Setting of link state is not supported by this qemu" msgstr "이 qemu에서는 'info blockstats'를 지원하지 않습니다" #: src/qemu/qemu_process.c:1930 #, fuzzy, c-format msgid "Couldn't set link state on interface: %s" msgstr "인터페이스 MAC 주소를 인터페이스 이름으로 변환합니다" #: src/qemu/qemu_process.c:2381 #, c-format msgid "cannot find PCI address for VirtIO disk %s" msgstr "VirtIO 디스크 %s에 대한 PCI 주소를 찾을 수 없음" #: src/qemu/qemu_process.c:2395 #, c-format msgid "cannot find PCI address for %s NIC" msgstr "%s NIC에 대해 PCI주소를 찾을 수 없음" #: src/qemu/qemu_process.c:2409 #, c-format msgid "cannot find PCI address for controller %s" msgstr "%s 컨트롤러에 대해 PCI주소를 찾을 수 없음" #: src/qemu/qemu_process.c:2423 #, c-format msgid "cannot find PCI address for video adapter %s" msgstr "%s 비디오 아답터에 대해 PCI주소를 찾을 수 없음" #: src/qemu/qemu_process.c:2437 #, c-format msgid "cannot find PCI address for sound adapter %s" msgstr "%s 사운드 아답터 대해 PCI주소를 찾을 수 없음" #: src/qemu/qemu_process.c:2450 #, c-format msgid "cannot find PCI address for watchdog %s" msgstr "%s 와치독에 대해 PCI주소를 찾을 수 없음" #: src/qemu/qemu_process.c:2462 #, fuzzy, c-format msgid "cannot find PCI address for balloon %s" msgstr "%s 와치독에 대해 PCI주소를 찾을 수 없음" #: src/qemu/qemu_process.c:2581 #, fuzzy, c-format msgid "Unable to pre-create chardev file '%s'" msgstr "파일 '%s'를 만드는 데 실패" #: src/qemu/qemu_process.c:2601 #, fuzzy, c-format msgid "cannot limit number of processes to %d" msgstr "프로세스 %d의 CPU 진화도를 얻을 수 없음" #: src/qemu/qemu_process.c:2613 #, fuzzy, c-format msgid "cannot set max opened files to %d" msgstr "'%s'의 모드를 %04o로 설정할 수 없음" #: src/qemu/qemu_process.c:3326 msgid "Could not create thread. QEMU initialization might be incomplete" msgstr "" #: src/qemu/qemu_process.c:3407 src/qemu/qemu_process.c:4264 #: src/uml/uml_driver.c:1007 msgid "VM is already active" msgstr "VM이 이미 실행중입니다" #: src/qemu/qemu_process.c:3473 #, fuzzy msgid "Unable to find an unused port for VNC" msgstr "사용되지 않은 VNC 포트를 찾을 수 없음" #: src/qemu/qemu_process.c:3485 #, fuzzy msgid "Unable to find an unused port for SPICE" msgstr "사용되지 않은 VNC 포트를 찾을 수 없음" #: src/qemu/qemu_process.c:3498 #, fuzzy msgid "Unable to find an unused port for SPICE TLS" msgstr "사용되지 않은 VNC 포트를 찾을 수 없음" #: src/qemu/qemu_process.c:3531 src/qemu/qemu_process.c:4280 #: src/uml/uml_driver.c:1029 #, c-format msgid "cannot create log directory %s" msgstr "로그 디렉터리 %s를 생성할 수 없음" #: src/qemu/qemu_process.c:3544 msgid "" "Domain requires KVM, but it is not available. Check that virtualization is " "enabled in the host BIOS, and host configuration is setup to load the kvm " "modules." msgstr "" #: src/qemu/qemu_process.c:3617 msgid "Failed to build pidfile path." msgstr "pidfile 경로를 설정하는 데 실패" #: src/qemu/qemu_process.c:3624 #, fuzzy, c-format msgid "Cannot remove stale PID file %s" msgstr "%s에 대한 비정상 PID파일을 제거할 수 없음" #: src/qemu/qemu_process.c:3712 #, fuzzy, c-format msgid "Domain %s didn't show up" msgstr "도메인 %s가 보이지 않습니다\n" #: src/qemu/qemu_process.c:3765 #, fuzzy, c-format msgid "cannot stat fd %d" msgstr "stat할 수 없음: %s" #: src/qemu/qemu_process.c:3852 #, fuzzy, c-format msgid "unable to set balloon to %lld" msgstr "위치 %lld로 %s에서 이동할 수 없음" #: src/qemu/qemu_process.c:4089 #, fuzzy, c-format msgid "failed to remove ebtables rule to allow MAC address on '%s'" msgstr "MAC 주소를 '%s'에 허용하는 ebtables 규칙을 제거하는 데 실패" #: src/remote/remote_client_bodies.h:17 src/remote/remote_client_bodies.h:1305 #: src/remote/remote_client_bodies.h:1344 #: src/remote/remote_client_bodies.h:1412 #: src/remote/remote_client_bodies.h:1584 #: src/remote/remote_client_bodies.h:1618 #: src/remote/remote_client_bodies.h:2006 #: src/remote/remote_client_bodies.h:5278 src/remote/remote_driver.c:1901 #, fuzzy, c-format msgid "%s length greater than maximum: %d > %d" msgstr "맵 길이가 최대길이를 초과: %d > %d" #: src/remote/remote_client_bodies.h:2689 #: src/remote/remote_client_bodies.h:2708 #: src/remote/remote_client_bodies.h:2752 #: src/remote/remote_client_bodies.h:2771 #: src/remote/remote_client_bodies.h:3496 #: src/remote/remote_client_bodies.h:3513 #: src/remote/remote_client_bodies.h:3557 #: src/remote/remote_client_bodies.h:3574 #: src/remote/remote_client_bodies.h:3618 #: src/remote/remote_client_bodies.h:3635 #: src/remote/remote_client_bodies.h:3679 #: src/remote/remote_client_bodies.h:3696 #: src/remote/remote_client_bodies.h:3740 #: src/remote/remote_client_bodies.h:3757 #: src/remote/remote_client_bodies.h:3801 #: src/remote/remote_client_bodies.h:3818 #: src/remote/remote_client_bodies.h:3862 #: src/remote/remote_client_bodies.h:3879 #: src/remote/remote_client_bodies.h:3923 #: src/remote/remote_client_bodies.h:3940 #: src/remote/remote_client_bodies.h:3984 #: src/remote/remote_client_bodies.h:4001 #: src/remote/remote_client_bodies.h:4500 #: src/remote/remote_client_bodies.h:4518 #: src/remote/remote_client_bodies.h:4673 #: src/remote/remote_client_bodies.h:4692 #: src/remote/remote_client_bodies.h:5636 #: src/remote/remote_client_bodies.h:5654 #, fuzzy, c-format msgid "too many remote undefineds: %d > %d" msgstr "원격 인터페이스가 너무 많음: %d > %d" #: src/remote/remote_driver.c:364 #, fuzzy, c-format msgid "Failed to parse value of URI component %s" msgstr "XML 조각 %s의 구문분석 실패" #: src/remote/remote_driver.c:436 #, fuzzy, c-format msgid "using unix socket and remote server '%s' is not supported." msgstr "디스크 암호 설정을 지원하지 않습니다" #: src/remote/remote_driver.c:453 #, fuzzy msgid "" "remote_open: transport in URL not recognised (should be tls|unix|ssh|ext|tcp|" "libssh2)" msgstr "" "remote_open: URL의 전송방식을 인식할 수 없음(tls|unix|ssh|ext|tcp여야 함)" #: src/remote/remote_driver.c:581 msgid "remote_open: for 'ext' transport, command is required" msgstr "remote_open: 'ext' 전송, 명령이 필요합니다" #: src/remote/remote_driver.c:666 #, fuzzy msgid "Unable to locate libvirtd daemon in $PATH" msgstr "%s 장치를 허용할 수 없음" #: src/remote/remote_driver.c:720 msgid "transport methods unix, ssh and ext are not supported under Windows" msgstr "전송 방식 unix, ssh, ext는 Windows하에서 지원하지 않습니다" #: src/remote/remote_driver.c:1161 #, fuzzy msgid "remoteNodeGetCPUStats: returned number of stats exceeds limit" msgstr "" "remoteDomainGetSchedulerParameters: 반환된 매개변수 갯수가 범위를 초과합니다" #: src/remote/remote_driver.c:1180 src/remote/remote_driver.c:1244 #, fuzzy, c-format msgid "Stats %s too big for destination" msgstr "경로 %s가 목적지에 대해 너무 큼" #: src/remote/remote_driver.c:1225 #, fuzzy msgid "remoteNodeGetMemoryStats: returned number of stats exceeds limit" msgstr "" "remoteDomainGetSchedulerParameters: 반환된 매개변수 갯수가 범위를 초과합니다" #: src/remote/remote_driver.c:1276 #, c-format msgid "too many NUMA cells: %d > %d" msgstr "너무 많은 NUMA 셀: %d > %d" #: src/remote/remote_driver.c:1315 src/remote/remote_driver.c:1329 #, c-format msgid "too many remote domain IDs: %d > %d" msgstr "너무 많은 원격 도메인 ID : %d > %d" #: src/remote/remote_driver.c:1510 #, fuzzy msgid "returned number of parameters exceeds limit" msgstr "" "remoteDomainGetSchedulerParameters: 반환된 매개변수 갯수가 범위를 초과합니다" #: src/remote/remote_driver.c:1586 #, fuzzy msgid "returned number of disk errors exceeds limit" msgstr "" "remoteDomainGetSchedulerParameters: 반환된 매개변수 갯수가 범위를 초과합니다" #: src/remote/remote_driver.c:1636 #, fuzzy msgid "remoteDomainBlockStatsFlags: returned number of stats exceeds limit" msgstr "" "remoteDomainGetSchedulerParameters: 반환된 매개변수 갯수가 범위를 초과합니다" #: src/remote/remote_driver.c:1831 src/remote/remote_driver.c:2001 #, c-format msgid "vCPU count exceeds maximum: %d > %d" msgstr "vCPU 갯수가 최대 갯수를 초과: %d > %d" #: src/remote/remote_driver.c:1839 src/remote/remote_driver.c:1943 #: src/remote/remote_driver.c:2008 #, c-format msgid "vCPU map buffer length exceeds maximum: %d > %d" msgstr "vCPU 맵 버퍼 길이가 최대 길이를 초과: %d > %d" #: src/remote/remote_driver.c:1860 src/remote/remote_driver.c:2025 #, c-format msgid "host reports too many vCPUs: %d > %d" msgstr "호스트가 너무 많은 vCPU를 보고함: %d > %d" #: src/remote/remote_driver.c:1867 src/remote/remote_driver.c:1963 #: src/remote/remote_driver.c:2031 #, c-format msgid "host reports map buffer length exceeds maximum: %d > %d" msgstr "호스트가 최대 길이를 초과하는 맵 버퍼 길이를 보고함: %d > %d" #: src/remote/remote_driver.c:2081 #, fuzzy, c-format msgid "security label exceeds maximum: %zu" msgstr "보안 레이블이 최대값을 넘어감: %zd" #: src/remote/remote_driver.c:2125 #, fuzzy, c-format msgid "security label exceeds maximum: %zd" msgstr "보안 레이블이 최대값을 넘어감: %zd" #: src/remote/remote_driver.c:2197 #, fuzzy, c-format msgid "security model exceeds maximum: %zu" msgstr "보안 모델이 최대값을 넘어감: %zd" #: src/remote/remote_driver.c:2206 #, fuzzy, c-format msgid "security doi exceeds maximum: %zu" msgstr "보안 doi가 최대값을 넘어감: %zd" #: src/remote/remote_driver.c:2293 msgid "caller ignores cookie or cookielen" msgstr "" #: src/remote/remote_driver.c:2302 src/remote/remote_driver.c:4647 msgid "caller ignores uri_out" msgstr "" #: src/remote/remote_driver.c:2406 #, c-format msgid "too many memory stats requested: %d > %d" msgstr "너무 많은 메모리 stat이 요청되었습니다: %d > %d" #: src/remote/remote_driver.c:2450 #, c-format msgid "block peek request too large for remote protocol, %zi > %d" msgstr "블럭 들여다보기 요청이 원격 프로토콜에 대해 너무 큼, %zi > %d" #: src/remote/remote_driver.c:2471 src/remote/remote_driver.c:2522 msgid "returned buffer is not same size as requested" msgstr "반환된 버퍼가 요청한 크기와 동일하지 않습니다" #: src/remote/remote_driver.c:2502 #, c-format msgid "memory peek request too large for remote protocol, %zi > %d" msgstr "메모리 들여다보기 요청이 원격 프로토콜에 대해 너무 큼, %zi > %d" #: src/remote/remote_driver.c:2647 #, fuzzy, c-format msgid "nparams count exceeds maximum: %u > %u" msgstr "vCPU 갯수가 최대 갯수를 초과: %d > %d" #: src/remote/remote_driver.c:2653 #, fuzzy, c-format msgid "ncpus count exceeds maximum: %u > %u" msgstr "vCPU 갯수가 최대 갯수를 초과: %d > %d" #: src/remote/remote_driver.c:2678 #, fuzzy msgid "remoteDomainGetCPUStats: returned number of stats exceeds limit" msgstr "" "remoteDomainGetSchedulerParameters: 반환된 매개변수 갯수가 범위를 초과합니다" #: src/remote/remote_driver.c:3002 #, c-format msgid "unknown authentication type %s" msgstr "알려지지 않은 인증 유형 %s" #: src/remote/remote_driver.c:3011 #, c-format msgid "requested authentication type %s rejected" msgstr "요청된 인증 유형 %s가 거부되었습니다" #: src/remote/remote_driver.c:3050 #, c-format msgid "unsupported authentication type %d" msgstr "지원하지 않는 인증 유형 %d" #: src/remote/remote_driver.c:3334 msgid "Failed to make auth credentials" msgstr "인증 크레덴셜 생성 실패" #: src/remote/remote_driver.c:3341 #, fuzzy msgid "No authentication callback available" msgstr "권한 설정 콜백이 제공되지 않았습니다." #: src/remote/remote_driver.c:3347 src/remote/remote_driver.c:3652 msgid "Failed to collect auth credentials" msgstr "인증 크레덴셜 수집 실패" #: src/remote/remote_driver.c:3446 #, c-format msgid "SASL mechanism %s not supported by server" msgstr "SASL 메커니즘 %s가 서버에서 지원되지 않습니다" #: src/remote/remote_driver.c:3476 #, fuzzy, c-format msgid "SASL negotiation data too long: %zu bytes" msgstr "SASL 협상 데이터가 너무 긺: %d 바이트" #: src/remote/remote_driver.c:3571 #, c-format msgid "negotiation SSF %d was not strong enough" msgstr "SSF %d 협상이 충분히 강력하지 않았습니다" #: src/remote/remote_driver.c:3692 src/remote/remote_driver.c:4435 msgid "adding cb to list" msgstr "cb를 목록에 추가" #: src/remote/remote_driver.c:4150 #, fuzzy msgid "no internalFlags support" msgstr "이벤트 지원 없음" #: src/remote/remote_driver.c:4476 src/remote/remote_driver.c:4483 #, fuzzy, c-format msgid "unable to find callback ID %d" msgstr "%s에 대한 cgroup을 찾을 수 없음\n" #: src/remote/remote_driver.c:4579 src/remote/remote_driver.c:4638 #: src/remote/remote_driver.c:4721 src/remote/remote_driver.c:4782 #: src/remote/remote_driver.c:4841 msgid "caller ignores cookieout or cookieoutlen" msgstr "" #: src/remote/remote_driver.c:4935 msgid "" "the caller doesn't support keepalive protocol; perhaps it's missing event " "loop implementation" msgstr "" #: src/rpc/virkeepalive.c:273 msgid "keepalive interval already set" msgstr "" #: src/rpc/virnetclient.c:319 msgid "unable to make pipe" msgstr "파이프를 만들 수 없음" #: src/rpc/virnetclient.c:542 #, fuzzy msgid "Unable to register async IO callback" msgstr "%s에 대한 cgroup을 찾을 수 없음\n" #: src/rpc/virnetclient.c:560 msgid "Unable to enable keepalives without async IO support" msgstr "" #: src/rpc/virnetclient.c:721 src/rpc/virnetclient.c:1728 #, fuzzy msgid "failed to wake up polling thread" msgstr "'%s' 읽기 위한 파이프 생성에 실패" #: src/rpc/virnetclient.c:831 #, fuzzy msgid "Unable to read TLS confirmation" msgstr "Xen 데몬에서 읽기 실패" #: src/rpc/virnetclient.c:836 #, fuzzy msgid "server verification (of our certificate or IP address) failed" msgstr "(우리쪽 인증서나 IP주소에 대한) 서버 검증이 실패했습니다\n" #: src/rpc/virnetclient.c:985 #, fuzzy, c-format msgid "no call waiting for reply with prog %d vers %d serial %d" msgstr "일련번호 %d인 응답을 기다리는 호출 없음" #: src/rpc/virnetclient.c:1151 #, fuzzy, c-format msgid "got unexpected RPC call prog %d vers %d proc %d type %d" msgstr "예기치 않은 RPC 호출 %d를 서버에서 받음" #: src/rpc/virnetclient.c:1531 msgid "poll on socket failed" msgstr "소켓 폴링이 실패했습니다" #: src/rpc/virnetclient.c:1558 #, fuzzy msgid "read on wakeup fd failed" msgstr "fd %d에서 읽기가 실패했습니다" #: src/rpc/virnetclient.c:1602 msgid "received hangup / error event on socket" msgstr "소켓에서 hangup / 에러 이벤트를 받음" #: src/rpc/virnetclient.c:1746 msgid "failed to wait on condition" msgstr "조건을 기다리는 데 실패" #: src/rpc/virnetclient.c:1872 msgid "Attempt to send an asynchronous message with a synchronous reply" msgstr "" #: src/rpc/virnetclient.c:1879 msgid "Attempt to send a non-blocking message with a synchronous reply" msgstr "" #: src/rpc/virnetclient.c:1891 msgid "cannot initialize condition variable" msgstr "상태 변수를 초기화할 수 없습니다" #: src/rpc/virnetclient.c:1956 #, fuzzy msgid "client socket is closed" msgstr "소켓 폴링이 실패했습니다" #: src/rpc/virnetclientprogram.c:221 #, fuzzy, c-format msgid "program mismatch in event (actual %x, expected %x)" msgstr "프로그램 불일치 (실제 %x, 기대값 %x) " #: src/rpc/virnetclientprogram.c:227 #, fuzzy, c-format msgid "version mismatch in event (actual %x, expected %x)" msgstr "버전 불일치 (실제 %x, 기대값 %x) " #: src/rpc/virnetclientprogram.c:233 #, fuzzy, c-format msgid "status mismatch in event (actual %x, expected %x)" msgstr "버전 불일치 (실제 %x, 기대값 %x) " #: src/rpc/virnetclientprogram.c:239 #, fuzzy, c-format msgid "type mismatch in event (actual %x, expected %x)" msgstr "버전 불일치 (실제 %x, 기대값 %x) " #: src/rpc/virnetclientprogram.c:247 #, fuzzy, c-format msgid "No event expected with procedure %x" msgstr "예기치 못한 와치독 모델 %d" #: src/rpc/virnetclientprogram.c:308 src/rpc/virnetclientprogram.c:369 #, fuzzy, c-format msgid "Cannot duplicate FD %d" msgstr "'%s'를 생성할 수 없음" #: src/rpc/virnetclientprogram.c:314 src/rpc/virnetclientprogram.c:375 #: src/rpc/virnetmessage.c:522 #, fuzzy, c-format msgid "Cannot set close-on-exec %d" msgstr "모니터의 close-on-exec 플래그를 설정할 수 없음" #: src/rpc/virnetclientprogram.c:340 #, fuzzy, c-format msgid "Unexpected message type %d" msgstr "예기치 못한 비밀 사용 유형 %d" #: src/rpc/virnetclientprogram.c:345 #, fuzzy, c-format msgid "Unexpected message proc %d != %d" msgstr "예상치 못한 CPU 특징 정책 %d" #: src/rpc/virnetclientprogram.c:351 #, fuzzy, c-format msgid "Unexpected message serial %d != %d" msgstr "예기치 못한 비디오 모델 %d" #: src/rpc/virnetclientprogram.c:392 #, fuzzy, c-format msgid "Unexpected message status %d" msgstr "예기치 못한 특성 %d" #: src/rpc/virnetclientstream.c:446 #, fuzzy msgid "multiple stream callbacks not supported" msgstr "cpu 친밀도(affinity)가 지원되지 않습니다" #: src/rpc/virnetclientstream.c:482 src/rpc/virnetclientstream.c:504 #, fuzzy msgid "no stream callback registered" msgstr "스트림에 이미 등록된 콜백이 있습니다" #: src/rpc/virnetmessage.c:121 #, fuzzy msgid "Unable to decode message length" msgstr "세션 리더가 되는 데 실패" #: src/rpc/virnetmessage.c:128 #, fuzzy, c-format msgid "packet %d bytes received from server too small, want %d" msgstr "서버에서 받은 패킷이 너무 작음" #: src/rpc/virnetmessage.c:138 #, fuzzy, c-format msgid "packet %d bytes received from server too large, want %d" msgstr "서버에서 받은 패킷이 너무 큼" #: src/rpc/virnetmessage.c:187 #, fuzzy msgid "Unable to decode message header" msgstr "세션 리더가 되는 데 실패" #: src/rpc/virnetmessage.c:233 src/rpc/virnetmessage.c:362 #: src/rpc/virnetmessage.c:427 src/rpc/virnetmessage.c:452 #, fuzzy msgid "Unable to encode message length" msgstr "세션 리더가 되는 데 실패" #: src/rpc/virnetmessage.c:238 #, fuzzy msgid "Unable to encode message header" msgstr "세션 리더가 되는 데 실패" #: src/rpc/virnetmessage.c:249 #, fuzzy msgid "Unable to re-encode message length" msgstr "세션 리더가 되는 데 실패" #: src/rpc/virnetmessage.c:274 #, c-format msgid "Too many FDs to send %d, expected %d maximum" msgstr "" #: src/rpc/virnetmessage.c:280 #, fuzzy msgid "Unable to encode number of FDs" msgstr "도메인 %s에 대한 장치를 거부할 수 없음" #: src/rpc/virnetmessage.c:305 #, fuzzy msgid "Unable to decode number of FDs" msgstr "도메인 %s에 대한 장치를 거부할 수 없음" #: src/rpc/virnetmessage.c:312 #, c-format msgid "Received too many FDs %d, expected %d maximum" msgstr "" #: src/rpc/virnetmessage.c:349 #, fuzzy msgid "Unable to encode message payload" msgstr "세션 리더가 되는 데 실패" #: src/rpc/virnetmessage.c:390 #, fuzzy msgid "Unable to decode message payload" msgstr "세션 리더가 되는 데 실패" #: src/rpc/virnetmessage.c:414 #, c-format msgid "Stream data too long to send (%zu bytes needed, %zu bytes available)" msgstr "" #: src/rpc/virnetmessage.c:496 msgid "Library function returned error but did not set virError" msgstr "" #: src/rpc/virnetmessage.c:509 #, c-format msgid "No FD available at slot %zu" msgstr "" #: src/rpc/virnetmessage.c:515 #, fuzzy, c-format msgid "Unable to duplicate FD %d" msgstr "%s를 열 수 없음" #: src/rpc/virnetsaslcontext.c:85 src/rpc/virnetsaslcontext.c:114 #, c-format msgid "failed to initialize SASL library: %d (%s)" msgstr "SASL 라이브러리 초기화에 실패: %d (%s)" #: src/rpc/virnetsaslcontext.c:95 src/rpc/virnetsaslcontext.c:124 #: src/rpc/virnetsaslcontext.c:201 src/rpc/virnetsaslcontext.c:243 #: src/rpc/virnettlscontext.c:682 src/rpc/virnettlscontext.c:1173 #, fuzzy msgid "Failed to initialized mutex" msgstr "TLS 클라이언트를 초기화할 수 없음: %s" #: src/rpc/virnetsaslcontext.c:157 src/rpc/virnettlscontext.c:381 #, c-format msgid "Malformed TLS whitelist regular expression '%s'" msgstr "" #: src/rpc/virnetsaslcontext.c:166 #, c-format msgid "SASL client %s not allowed in whitelist" msgstr "SASL 클라이언트 %s가 whitelist에 허용되지 않습니다" #: src/rpc/virnetsaslcontext.c:170 msgid "Client's username is not on the list of allowed clients" msgstr "" #: src/rpc/virnetsaslcontext.c:218 src/rpc/virnetsaslcontext.c:261 #, c-format msgid "Failed to create SASL client context: %d (%s)" msgstr "SASL 클라이언트 문맥을 생성하는 데 실패: %d (%s)" #: src/rpc/virnetsaslcontext.c:283 #, c-format msgid "cannot set external SSF %d (%s)" msgstr "외부 SSF %d (%s)를 설정할 수 없음" #: src/rpc/virnetsaslcontext.c:304 #, c-format msgid "cannot query SASL username on connection %d (%s)" msgstr "연결에 SASL 사용자명을 질의할 수 없습니다 %d (%s)" #: src/rpc/virnetsaslcontext.c:311 msgid "no client username was found" msgstr "클라이언트 사용자명을 찾을 수 없습니다" #: src/rpc/virnetsaslcontext.c:332 #, c-format msgid "cannot query SASL ssf on connection %d (%s)" msgstr "SASL ssf 질의를 연결에 할 수 없습니다 %d (%s)" #: src/rpc/virnetsaslcontext.c:368 #, c-format msgid "cannot set security props %d (%s)" msgstr "보안 특성 %d (%s)를 설정할 수 없음" #: src/rpc/virnetsaslcontext.c:392 #, fuzzy, c-format msgid "cannot get security props %d (%s)" msgstr "보안 특성 %d (%s)를 설정할 수 없음" #: src/rpc/virnetsaslcontext.c:420 #, c-format msgid "cannot list SASL mechanisms %d (%s)" msgstr "SASL 메커니즘 목록을 얻을 수 없습니다 %d (%s)" #: src/rpc/virnetsaslcontext.c:473 src/rpc/virnetsaslcontext.c:568 #: src/rpc/virnetsaslcontext.c:613 #, c-format msgid "Failed to start SASL negotiation: %d (%s)" msgstr "SASL 협상을 시작하는 데 실패: %d (%s)" #: src/rpc/virnetsaslcontext.c:522 #, fuzzy, c-format msgid "Failed to step SASL negotiation: %d (%s)" msgstr "SASL 협상을 시작하는 데 실패: %d (%s)" #: src/rpc/virnetsaslcontext.c:646 src/rpc/virnetsaslcontext.c:685 #, c-format msgid "SASL data length %zu too long, max %zu" msgstr "" #: src/rpc/virnetsaslcontext.c:660 #, fuzzy, c-format msgid "failed to encode SASL data: %d (%s)" msgstr "SASL 데이터를 부호화하는 데 실패: %s" #: src/rpc/virnetsaslcontext.c:698 #, fuzzy, c-format msgid "failed to decode SASL data: %d (%s)" msgstr "SASL 데이터를 복호화하는 데 실패: %s" #: src/rpc/virnetsocket.c:150 #, fuzzy msgid "Unable to set close-on-exec flag" msgstr "모니터의 close-on-exec 플래그를 설정할 수 없음" #: src/rpc/virnetsocket.c:155 #, fuzzy msgid "Unable to enable non-blocking flag" msgstr "소켓을 비-블로킹으로 만들 수 없음" #: src/rpc/virnetsocket.c:184 #, fuzzy msgid "Unable to disable nagle algorithm" msgstr "모니터의 close-on-exec 플래그를 설정할 수 없음" #: src/rpc/virnetsocket.c:237 src/rpc/virnetsocket.c:454 #, fuzzy, c-format msgid "Unable to resolve address '%s' service '%s': %s" msgstr "PCI 장치 %s를 리셋할 수 없음: %s" #: src/rpc/virnetsocket.c:250 src/rpc/virnetsocket.c:465 #, fuzzy msgid "Unable to create socket" msgstr "소켓을 생성할 수 없음" #: src/rpc/virnetsocket.c:256 #, fuzzy msgid "Unable to enable port reuse" msgstr "파이프를 생성할 수 없" #: src/rpc/virnetsocket.c:273 #, fuzzy msgid "Unable to force bind to IPv6 only" msgstr "%s에 대한 cgroup을 얻을 수 없음" #: src/rpc/virnetsocket.c:281 src/rpc/virnetsocket.c:311 #, fuzzy msgid "Unable to bind to port" msgstr "%s에 대한 cgroup을 찾을 수 없음\n" #: src/rpc/virnetsocket.c:292 src/rpc/virnetsocket.c:419 #: src/rpc/virnetsocket.c:488 src/rpc/virnetsocket.c:571 #: src/rpc/virnetsocket.c:1465 #, fuzzy msgid "Unable to get local socket name" msgstr "로컬 호스트 이름을 얻는 데 실패" #: src/rpc/virnetsocket.c:349 src/rpc/virnetsocket.c:535 #, fuzzy msgid "Failed to create socket" msgstr "소켓 생성 실패" #: src/rpc/virnetsocket.c:356 src/rpc/virnetsocket.c:541 #, c-format msgid "Path %s too long for unix socket" msgstr "경로 %s가 유닉스 소켓에 대해 너무 깁니다" #: src/rpc/virnetsocket.c:369 #, fuzzy, c-format msgid "Failed to bind socket to '%s'" msgstr "소켓을 '%s'로 바인드 하는 것이 실패했습니다: %s " #: src/rpc/virnetsocket.c:380 #, fuzzy, c-format msgid "Failed to change ownership of '%s' to %d:%d" msgstr "'%s'의 소유권을 %d로 이전할 수 없음: %d" #: src/rpc/virnetsocket.c:404 src/rpc/virnetsocket.c:591 #, fuzzy msgid "UNIX sockets are not supported on this platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/rpc/virnetsocket.c:481 #, fuzzy, c-format msgid "unable to connect to server at '%s:%s'" msgstr "'%s:%s'에 연결할 수 없음" #: src/rpc/virnetsocket.c:494 #, fuzzy msgid "Unable to get remote socket name" msgstr "슬롯 번호 '%s'를 구문 분석할 수 없음" #: src/rpc/virnetsocket.c:530 msgid "Auto-spawn of daemon requested, but no binary specified" msgstr "" #: src/rpc/virnetsocket.c:564 #, fuzzy, c-format msgid "Failed to connect socket to '%s'" msgstr "%s에 연결하는 데 실패" #: src/rpc/virnetsocket.c:613 src/rpc/virnetsocket.c:619 msgid "unable to create socket pair" msgstr "소켓 쌍을 생성할 수 없음" #: src/rpc/virnetsocket.c:657 #, fuzzy msgid "Tunnelling sockets not supported on this platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/rpc/virnetsocket.c:762 #, fuzzy msgid "Failed to parse port number" msgstr "XML 구문 분석에 실패" #: src/rpc/virnetsocket.c:782 #, fuzzy, c-format msgid "Invalid host key verification method: '%s'" msgstr "잘못된 인터페이스 이름 %s" #: src/rpc/virnetsocket.c:819 #, fuzzy, c-format msgid "Invalid authentication method: '%s'" msgstr "인증이 실패했습니다: %s" #: src/rpc/virnetsocket.c:864 msgid "libssh2 transport support was not enabled" msgstr "" #: src/rpc/virnetsocket.c:946 #, fuzzy msgid "Unable to copy socket file handle" msgstr "설정 파일 핸들을 저장하는 데 실패했습니다." #: src/rpc/virnetsocket.c:997 #, fuzzy msgid "Failed to get client socket identity" msgstr "클라이언트 소켓 생성 실패" #: src/rpc/virnetsocket.c:1017 #, fuzzy msgid "Client socket identity not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/rpc/virnetsocket.c:1173 #, fuzzy, c-format msgid "Cannot recv data: %s" msgstr "데이터를 수신할 수 없음: %s" #: src/rpc/virnetsocket.c:1176 #, fuzzy msgid "Cannot recv data" msgstr "데이터를 수신할 수 없음: %s" #: src/rpc/virnetsocket.c:1181 #, fuzzy, c-format msgid "End of file while reading data: %s" msgstr "%s 로그 출력을 읽는 중 메모리 꽉 참: %s" #: src/rpc/virnetsocket.c:1184 #, fuzzy msgid "End of file while reading data" msgstr "드라이버를 다시 불러오는 중 오류가 발생했습니다" #: src/rpc/virnetsocket.c:1217 #, fuzzy msgid "Cannot write data" msgstr "데이터를 수신할 수 없음: %s" #: src/rpc/virnetsocket.c:1222 msgid "End of file while writing data" msgstr "" #: src/rpc/virnetsocket.c:1367 #, fuzzy msgid "Sending file descriptors is not supported on this socket" msgstr "이 qemu에서는 'info blockstats'를 지원하지 않습니다" #: src/rpc/virnetsocket.c:1378 #, fuzzy, c-format msgid "Failed to send file descriptor %d" msgstr "비-블러킹 파일 디스크립터 플래그를 설정하는 데 실패했습니다" #: src/rpc/virnetsocket.c:1401 #, fuzzy msgid "Receiving file descriptors is not supported on this socket" msgstr "이 qemu에서는 'info blockstats'를 지원하지 않습니다" #: src/rpc/virnetsocket.c:1411 #, fuzzy msgid "Failed to recv file descriptor" msgstr "도메인 설명 구문 분석 실패" #: src/rpc/virnetsocket.c:1428 #, fuzzy msgid "Unable to listen on socket" msgstr "%s를 열 수 없음" #: src/rpc/virnetsocket.c:1459 #, fuzzy msgid "Unable to accept client" msgstr "파이프를 생성할 수 없" #: src/rpc/virnetserver.c:272 #, fuzzy, c-format msgid "Too many active clients (%zu), dropping connection from %s" msgstr "너무 많은 활성화된 클라이언트가 있습니다(%d), 연결을 버립니다" #: src/rpc/virnetserver.c:512 #, fuzzy msgid "Failed to read from signal pipe" msgstr "시그널 파이프에서 읽기에 실패했습니다: %s " #: src/rpc/virnetserver.c:529 #, fuzzy, c-format msgid "Unexpected signal received: %d" msgstr "예기치 못한 인터페이스 유형 %d" #: src/rpc/virnetserver.c:544 #, fuzzy msgid "Unable to create signal pipe" msgstr "파이프를 생성할 수 없" #: src/rpc/virnetserver.c:553 #, fuzzy msgid "Failed to add signal handle watch" msgstr "시그널 파이프에서 읽기에 실패했습니다: %s " #: src/rpc/virnetserver.c:723 msgid "Failed to register shutdown timeout" msgstr "종료 타임아웃을 등록하는 데 실패했습니다" #: src/rpc/virnetserverclient.c:773 src/rpc/virnetserverclient.c:951 #, fuzzy, c-format msgid "unexpected zero/negative length request %lld" msgstr "예기치 못한 길이가 음수로 된 요청 %lld 입니다" #: src/rpc/virnetservermdns.c:293 #, fuzzy, c-format msgid "Failed to add watch for fd %d events %d" msgstr "'%s'에서 읽기 실패: %s " #: src/rpc/virnetservermdns.c:348 src/util/virtime.c:247 #, fuzzy msgid "Unable to get current time" msgstr "현재 시간을 얻을 수 없음" #: src/rpc/virnetservermdns.c:375 #, fuzzy, c-format msgid "Failed to add timer with timeout %lld" msgstr "NIC를 추가하는 데 실패 '%s'" #: src/rpc/virnetservermdns.c:463 #, fuzzy, c-format msgid "Failed to create mDNS client: %s" msgstr "소켓 생성이 실패했습니다: %s " #: src/rpc/virnetservermdns.c:625 #, fuzzy msgid "avahi not available at build time" msgstr "이 플랫폼에 사용 가능한 NUMA 메모리 정보가 없음" #: src/rpc/virnetserverprogram.c:230 #, fuzzy, c-format msgid "Cannot find program %d version %d" msgstr "버전 번호 %s를 구문 분석할 수 없음" #: src/rpc/virnetserverprogram.c:282 #, fuzzy, c-format msgid "program mismatch (actual %x, expected %x)" msgstr "프로그램 불일치 (실제 %x, 기대값 %x) " #: src/rpc/virnetserverprogram.c:289 #, c-format msgid "version mismatch (actual %x, expected %x)" msgstr "버전 불일치 (실제 %x, 기대값 %x) " #: src/rpc/virnetserverprogram.c:319 #, fuzzy, c-format msgid "Unexpected message type %u" msgstr "예기치 못한 비밀 사용 유형 %d" #: src/rpc/virnetserverprogram.c:375 #, fuzzy, c-format msgid "Unexpected message status %u" msgstr "%s에 예기치 못한 이전 상태" #: src/rpc/virnetserverprogram.c:384 #, c-format msgid "unknown procedure: %d" msgstr "알려지지 않은 절차: %d " #: src/rpc/virnetserverprogram.c:398 msgid "authentication required" msgstr "인증이 필요합니다" #: src/rpc/virnetsshsession.c:304 #, fuzzy, c-format msgid "Failed to retrieve ssh host key: %s" msgstr "경로 %s를 만드는 데 실패" #: src/rpc/virnetsshsession.c:326 msgid "" "No user interaction callback provided: Can't verify the session host key" msgstr "" #: src/rpc/virnetsshsession.c:343 src/rpc/virnetsshsession.c:735 msgid "no suitable method to retrieve authentication credentials" msgstr "" #: src/rpc/virnetsshsession.c:353 #, fuzzy msgid "failed to calculate ssh host key hash" msgstr "파일 '%s'를 만드는 데 실패" #: src/rpc/virnetsshsession.c:372 #, c-format msgid "Accept SSH host key with hash '%s' for host '%s:%d' (%s/%s)?" msgstr "" #: src/rpc/virnetsshsession.c:384 #, fuzzy msgid "failed to retrieve decision to accept host key" msgstr "호스트 이름을 결정하는 데 실패" #: src/rpc/virnetsshsession.c:396 #, c-format msgid "SSH host key for '%s' (%s) was not accepted" msgstr "" #: src/rpc/virnetsshsession.c:419 #, fuzzy msgid "unsupported SSH key type" msgstr "지원하지 않는 장치 유형" #: src/rpc/virnetsshsession.c:448 #, fuzzy, c-format msgid "unable to add SSH host key for host '%s': %s" msgstr "USB 디스크 %s를 추가할 수 없음: %s" #: src/rpc/virnetsshsession.c:463 #, fuzzy, c-format msgid "failed to write known_host file '%s': %s" msgstr "파일 '%s'를 만드는 데 실패" #: src/rpc/virnetsshsession.c:479 #, c-format msgid "" "!!! SSH HOST KEY VERIFICATION FAILED !!!: Identity of host '%s:%d' differs " "from stored identity. Please verify the new host key '%s' to avoid possible " "man in the middle attack. The key is stored in '%s'." msgstr "" #: src/rpc/virnetsshsession.c:490 #, fuzzy, c-format msgid "failed to validate SSH host key: %s" msgstr "호스트 인터페이스 목록 얻기 실패" #: src/rpc/virnetsshsession.c:495 #, fuzzy msgid "Unknown error value" msgstr "알려지지 않은 오류" #: src/rpc/virnetsshsession.c:519 #, fuzzy msgid "Failed to connect to ssh agent" msgstr "%s에 연결하는 데 실패" #: src/rpc/virnetsshsession.c:525 #, fuzzy msgid "Failed to list ssh agent identities" msgstr "노드 장치 목록 얻기 실패" #: src/rpc/virnetsshsession.c:543 src/rpc/virnetsshsession.c:567 #, fuzzy, c-format msgid "failed to authenticate using SSH agent: %s" msgstr "SASL 데이터 %s 인코딩에 실패했습니다" #: src/rpc/virnetsshsession.c:555 msgid "SSH Agent did not provide any authentication identity" msgstr "" #: src/rpc/virnetsshsession.c:559 msgid "All identities provided by the SSH Agent were rejected" msgstr "" #: src/rpc/virnetsshsession.c:600 src/rpc/virnetsshsession.c:659 #, fuzzy, c-format msgid "authentication with private key '%s' has failed: %s" msgstr "인증이 실패했습니다: %s" #: src/rpc/virnetsshsession.c:609 msgid "" "No user interaction callback provided: Can't retrieve private key passphrase" msgstr "" #: src/rpc/virnetsshsession.c:627 msgid "no suitable method to retrieve key passphrase" msgstr "" #: src/rpc/virnetsshsession.c:632 #, c-format msgid "Passphrase for key '%s'" msgstr "" #: src/rpc/virnetsshsession.c:640 msgid "failed to retrieve private key passphrase: callback has failed" msgstr "" #: src/rpc/virnetsshsession.c:692 #, fuzzy, c-format msgid "tunelled password authentication failed: %s" msgstr "인증이 실패했습니다: %s" #: src/rpc/virnetsshsession.c:719 msgid "" "Can't perform keyboard-interactive authentication: Authentication callback " "not provided " msgstr "" #: src/rpc/virnetsshsession.c:743 #, fuzzy msgid "failed to retrieve credentials" msgstr "인증 크레덴셜 생성 실패" #: src/rpc/virnetsshsession.c:760 src/rpc/virnetsshsession.c:767 #, fuzzy, c-format msgid "keyboard interactive authentication failed: %s" msgstr "인증이 실패했습니다: %s" #: src/rpc/virnetsshsession.c:786 src/rpc/virnetsshsession.c:900 #, fuzzy msgid "No authentication methods and credentials provided" msgstr "권한 설정 콜백이 제공되지 않았습니다." #: src/rpc/virnetsshsession.c:802 #, c-format msgid "couldn't retrieve authentication methods list: %s" msgstr "" #: src/rpc/virnetsshsession.c:847 #, fuzzy msgid "No authentication methods supplied" msgstr "인증이 필요합니다" #: src/rpc/virnetsshsession.c:852 msgid "" "None of the requested authentication methods are supported by the server" msgstr "" #: src/rpc/virnetsshsession.c:856 msgid "" "All provided authentication methods with credentials were rejected by the " "server" msgstr "" #: src/rpc/virnetsshsession.c:873 #, fuzzy, c-format msgid "failed to open ssh channel: %s" msgstr "'%s' 파일 열기 실패" #: src/rpc/virnetsshsession.c:881 #, fuzzy, c-format msgid "failed to execute command '%s': %s" msgstr "QEMU 명령 '%s'를 실행할 수 없음" #: src/rpc/virnetsshsession.c:907 #, fuzzy msgid "No channel command provided" msgstr "권한 설정 콜백이 제공되지 않았습니다." #: src/rpc/virnetsshsession.c:914 msgid "Hostname is needed for host key verification" msgstr "" #: src/rpc/virnetsshsession.c:953 msgid "Username and password must be provided for password authentication" msgstr "" #: src/rpc/virnetsshsession.c:991 src/rpc/virnetsshsession.c:1075 msgid "Username must be provided for ssh agent authentication" msgstr "" #: src/rpc/virnetsshsession.c:1031 msgid "" "Username and key file path must be provided for private key authentication" msgstr "" #: src/rpc/virnetsshsession.c:1149 #, fuzzy, c-format msgid "unable to load knownhosts file '%s': %s" msgstr "USB 디스크 %s를 추가할 수 없음: %s" #: src/rpc/virnetsshsession.c:1155 #, fuzzy, c-format msgid "known hosts file '%s' does not exist" msgstr "'%s'가 존재하지 않습니다" #: src/rpc/virnetsshsession.c:1192 tools/virsh.c:2876 #, fuzzy msgid "Failed to initialize mutex" msgstr "TLS 클라이언트를 초기화할 수 없음: %s" #: src/rpc/virnetsshsession.c:1203 #, fuzzy msgid "Failed to initialize libssh2 session" msgstr "TLS 클라이언트를 초기화할 수 없음: %s" #: src/rpc/virnetsshsession.c:1209 #, fuzzy msgid "Failed to initialize libssh2 known hosts table" msgstr "이벤트 시스템을 초기화하는 데 실패했습니다" #: src/rpc/virnetsshsession.c:1215 #, fuzzy msgid "Failed to initialize libssh2 agent handle" msgstr "인증서를 초기화할 수 없습니다: %s" #: src/rpc/virnetsshsession.c:1247 #, fuzzy msgid "Invalid virNetSSHSessionPtr" msgstr "잘못된 매개변수 갯수" #: src/rpc/virnetsshsession.c:1263 #, fuzzy, c-format msgid "SSH session handshake failed: %s" msgstr "TLS 핸드세이크에 실패했습니다: %s" #: src/rpc/virnetsshsession.c:1308 src/rpc/virnetsshsession.c:1419 #: src/rpc/virnetsshsession.c:1431 #, c-format msgid "Remote program terminated with non-zero code: %d" msgstr "" #: src/rpc/virnetsshsession.c:1313 src/rpc/virnetsshsession.c:1423 #, fuzzy msgid "Tried to write socket in error state" msgstr "%s로부터 노드 장치를 생성하는 데 실패" #: src/rpc/virnetsshsession.c:1384 #, fuzzy, c-format msgid "Remote command terminated with non-zero code: %d" msgstr "%s: 명령이 0이 아닌 상태와 함께 종료했습니다" #: src/rpc/virnetsshsession.c:1456 #, fuzzy, c-format msgid "write failed: %s" msgstr "작업 실패: %s" #: src/rpc/virnettlscontext.c:112 #, fuzzy, c-format msgid "Cannot read %s '%s'" msgstr "'%s'를 읽을 수 없음" #: src/rpc/virnettlscontext.c:135 msgid "cannot get current time" msgstr "현재 시간을 얻을 수 없음" #: src/rpc/virnettlscontext.c:142 #, fuzzy, c-format msgid "The CA certificate %s has expired" msgstr "인증서가 만료되었습니다" #: src/rpc/virnettlscontext.c:144 #, fuzzy, c-format msgid "The server certificate %s has expired" msgstr "인증서가 만료되었습니다" #: src/rpc/virnettlscontext.c:145 #, fuzzy, c-format msgid "The client certificate %s has expired" msgstr "인증서가 만료되었습니다" #: src/rpc/virnettlscontext.c:153 #, fuzzy, c-format msgid "The CA certificate %s is not yet active" msgstr "인증서가 아직 활성화되지 않았습니다" #: src/rpc/virnettlscontext.c:155 #, fuzzy, c-format msgid "The server certificate %s is not yet active" msgstr "인증서가 아직 활성화되지 않았습니다" #: src/rpc/virnettlscontext.c:156 #, fuzzy, c-format msgid "The client certificate %s is not yet active" msgstr "인증서가 아직 활성화되지 않았습니다" #: src/rpc/virnettlscontext.c:186 #, c-format msgid "" "The certificate %s basic constraints show a CA, but we need one for a server" msgstr "" #: src/rpc/virnettlscontext.c:187 #, c-format msgid "" "The certificate %s basic constraints show a CA, but we need one for a client" msgstr "" #: src/rpc/virnettlscontext.c:194 #, c-format msgid "The certificate %s basic constraints do not show a CA" msgstr "" #: src/rpc/virnettlscontext.c:201 #, c-format msgid "The certificate %s is missing basic constraints for a CA" msgstr "" #: src/rpc/virnettlscontext.c:207 #, fuzzy, c-format msgid "Unable to query certificate %s basic constraints %s" msgstr "인증 우선순위를 설정할 수 없음: %s" #: src/rpc/virnettlscontext.c:234 #, fuzzy, c-format msgid "Unable to query certificate %s key usage %s" msgstr "CA 인증서를 읽어들일 수 없음: %s" #: src/rpc/virnettlscontext.c:244 #, fuzzy, c-format msgid "Certificate %s usage does not permit certificate signing" msgstr "인증서의 소유자가 호스트명(%s)과 일치하지 않습니다" #: src/rpc/virnettlscontext.c:256 #, fuzzy, c-format msgid "Certificate %s usage does not permit digital signature" msgstr "인증서의 소유자가 호스트명(%s)과 일치하지 않습니다" #: src/rpc/virnettlscontext.c:267 #, fuzzy, c-format msgid "Certificate %s usage does not permit key encipherment" msgstr "인증서의 소유자가 호스트명(%s)과 일치하지 않습니다" #: src/rpc/virnettlscontext.c:308 src/rpc/virnettlscontext.c:322 #, fuzzy, c-format msgid "Unable to query certificate %s key purpose %s" msgstr "블럭 이름 %s 구문 분석 실패" #: src/rpc/virnettlscontext.c:345 #, c-format msgid "Certificate %s purpose does not allow use for with a TLS server" msgstr "" #: src/rpc/virnettlscontext.c:357 #, c-format msgid "Certificate %s purpose does not allow use for with a TLS client" msgstr "" #: src/rpc/virnettlscontext.c:394 #, fuzzy msgid "" "Client's Distinguished Name is not on the list of allowed clients " "(tls_allowed_dn_list). Use 'certtool -i --infile clientcert.pem' to view " "theDistinguished Name field in the client certificate,or run this daemon " "with --verbose option." msgstr "" "remoteCheckCertificate: 클라이언트의 고유 이름(Distinguished Name)이 허용 클" "라이언트 목록(tls_allowed_dn_list)에 없습니다. 'openssl x509 -in clientcert." "pem -text'를 사용해서 클라이언트 인증서의 DN 필드를 보시거나, 이 데몬을 --" "verbose 옵션을 지정해 실행하십시오." #: src/rpc/virnettlscontext.c:417 #, fuzzy, c-format msgid "Certificate %s owner does not match the hostname %s" msgstr "인증서의 소유자가 호스트명(%s)과 일치하지 않습니다" #: src/rpc/virnettlscontext.c:467 #, fuzzy, c-format msgid "Unable to verify server certificate %s against CA certificate %s" msgstr "CA 인증서를 읽어들일 수 없음: %s" #: src/rpc/virnettlscontext.c:468 #, fuzzy, c-format msgid "Unable to verify client certificate %s against CA certificate %s" msgstr "서버 인증서를 검증할 수 없음: %s" #: src/rpc/virnettlscontext.c:474 src/rpc/virnettlscontext.c:973 msgid "Invalid certificate" msgstr "잘못된 인증서" #: src/rpc/virnettlscontext.c:477 src/rpc/virnettlscontext.c:976 msgid "The certificate is not trusted." msgstr "인증서가 신뢰할 수 없습니다" #: src/rpc/virnettlscontext.c:480 src/rpc/virnettlscontext.c:979 msgid "The certificate hasn't got a known issuer." msgstr "인증서의 발급자가 알려지지 않았습니다" #: src/rpc/virnettlscontext.c:483 src/rpc/virnettlscontext.c:982 msgid "The certificate has been revoked." msgstr "인증서가 폐기되었습니다" #: src/rpc/virnettlscontext.c:487 src/rpc/virnettlscontext.c:986 msgid "The certificate uses an insecure algorithm" msgstr "인증서가 안전하지 않은 알고리즘을 사용합니다" #: src/rpc/virnettlscontext.c:491 #, fuzzy, c-format msgid "Our own certificate %s failed validation against %s: %s" msgstr "서버 인증서가 검증에 실패했습니다: %s" #: src/rpc/virnettlscontext.c:514 src/rpc/virnettlscontext.c:1012 #, fuzzy msgid "Unable to initialize certificate" msgstr "인증서를 초기화할 수 없습니다: %s" #: src/rpc/virnettlscontext.c:526 #, fuzzy, c-format msgid "Unable to import server certificate %s" msgstr "인증서를 가져오기 할 수 없습니다: %s" #: src/rpc/virnettlscontext.c:527 #, fuzzy, c-format msgid "Unable to import client certificate %s" msgstr "인증서를 가져오기 할 수 없습니다: %s" #: src/rpc/virnettlscontext.c:602 #, fuzzy, c-format msgid "Unable to set x509 CA certificate: %s: %s" msgstr "CA 인증서를 읽어들일 수 없음: %s" #: src/rpc/virnettlscontext.c:620 #, fuzzy, c-format msgid "Unable to set x509 certificate revocation list: %s: %s" msgstr "인증 우선순위를 설정할 수 없음: %s" #: src/rpc/virnettlscontext.c:645 #, fuzzy, c-format msgid "Unable to set x509 key and certificate: %s, %s: %s" msgstr "CA 인증서를 읽어들일 수 없음: %s" #: src/rpc/virnettlscontext.c:700 #, fuzzy, c-format msgid "Unable to allocate x509 credentials: %s" msgstr "TLS 크레덴셜을 할당할 수 없음: %s" #: src/rpc/virnettlscontext.c:721 #, fuzzy, c-format msgid "Unable to initialize diffie-hellman parameters: %s" msgstr "인증서를 초기화할 수 없습니다: %s" #: src/rpc/virnettlscontext.c:728 #, fuzzy, c-format msgid "Unable to generate diffie-hellman parameters: %s" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: src/rpc/virnettlscontext.c:967 #, fuzzy, c-format msgid "Unable to verify TLS peer: %s" msgstr "서버 인증서를 검증할 수 없음: %s" #: src/rpc/virnettlscontext.c:990 #, fuzzy, c-format msgid "Certificate failed validation: %s" msgstr "서버 인증서가 검증에 실패했습니다: %s" #: src/rpc/virnettlscontext.c:997 #, fuzzy msgid "Only x509 certificates are supported" msgstr "오직 하나의 파일시스템만 지원됨" #: src/rpc/virnettlscontext.c:1003 #, fuzzy msgid "The certificate has no peers" msgstr "인증서가 만료되었습니다" #: src/rpc/virnettlscontext.c:1018 #, fuzzy msgid "Unable to load certificate" msgstr "CA 인증서를 읽어들일 수 없음: %s" #: src/rpc/virnettlscontext.c:1033 #, fuzzy, c-format msgid "Failed to get certificate %s distinguished name: %s" msgstr "인증 우선순위를 설정할 수 없음: %s" #: src/rpc/virnettlscontext.c:1105 #, fuzzy msgid "Failed to verify peer's certificate" msgstr "서버 인증서를 검증할 수 없음: %s" #: src/rpc/virnettlscontext.c:1187 #, fuzzy, c-format msgid "Failed to initialize TLS session: %s" msgstr "TLS 클라이언트를 초기화할 수 없음: %s" #: src/rpc/virnettlscontext.c:1197 #, fuzzy, c-format msgid "Failed to set TLS session priority %s" msgstr "TLS 알고리즘 우선순위를 설정할 수 없음: %s" #: src/rpc/virnettlscontext.c:1206 #, fuzzy, c-format msgid "Failed set TLS x509 credentials: %s" msgstr "클라이언트 인증서 확인에 실패했습니다: %s" #: src/rpc/virnettlscontext.c:1338 #, fuzzy, c-format msgid "TLS handshake failed %s" msgstr "TLS 핸드세이크에 실패했습니다: %s" #: src/rpc/virnettlscontext.c:1370 msgid "invalid cipher size for TLS session" msgstr "TLS 세션에 대한 잘못된 암호화 크기" #: src/secret/secret_driver.c:176 #, c-format msgid "mkstemp('%s') failed" msgstr "mkstemp('%s') 실패" #: src/secret/secret_driver.c:180 #, c-format msgid "fchmod('%s') failed" msgstr "fchmod('%s') 실패" #: src/secret/secret_driver.c:186 #, c-format msgid "error writing to '%s'" msgstr "'%s'에 쓰는 중 오류" #: src/secret/secret_driver.c:191 #, c-format msgid "error closing '%s'" msgstr "'%s' 닫는 중 오류" #: src/secret/secret_driver.c:197 #, c-format msgid "rename(%s, %s) failed" msgstr "rename(%s, %s) 실패" #: src/secret/secret_driver.c:247 #, c-format msgid "cannot create '%s'" msgstr "'%s'를 생성할 수 없음" #: src/secret/secret_driver.c:354 #, c-format msgid " does not match secret file name '%s'" msgstr "가 비밀 정보 파일 이름 '%s'와 일치하지 않습니다" #: src/secret/secret_driver.c:381 src/secret/secret_driver.c:488 #, c-format msgid "cannot open '%s'" msgstr "'%s'를 열 수 없음" #: src/secret/secret_driver.c:385 src/util/virfile.c:478 #, c-format msgid "cannot stat '%s'" msgstr "'%s'를 stat할 수 없음" #: src/secret/secret_driver.c:390 #, c-format msgid "'%s' file does not fit in memory" msgstr "'%s' 파일은 메모리에 들어갈 수 없습니다" #: src/secret/secret_driver.c:399 #, c-format msgid "cannot read '%s'" msgstr "'%s'를 읽을 수 없음" #: src/secret/secret_driver.c:406 #, c-format msgid "invalid base64 in '%s'" msgstr "'%s' 안에 잘못된 base64" #: src/secret/secret_driver.c:504 #, c-format msgid "Error reading secret: %s" msgstr "비밀정보 읽기 오류: %s" #: src/secret/secret_driver.c:637 src/secret/secret_driver.c:809 #: src/secret/secret_driver.c:845 src/secret/secret_driver.c:900 #: src/secret/secret_driver.c:946 #, c-format msgid "no secret with matching uuid '%s'" msgstr "uuid '%s'와 일치하는 비밀 정보 없음" #: src/secret/secret_driver.c:664 #, c-format msgid "no secret with matching usage '%s'" msgstr "사용법 '%s'와 일치하는 비밀정보 없음" #: src/secret/secret_driver.c:706 #, c-format msgid "a secret with UUID %s already defined for use with %s" msgstr "UUID %s인 비밀정보가 이미 %s와 사용하기 위해 정의됨" #: src/secret/secret_driver.c:726 #, c-format msgid "a secret with UUID %s is already defined for use with %s" msgstr "UUID %s인 비밀정보가 이미 %s와 사용하기 위해 정의되어 있습니다" #: src/secret/secret_driver.c:733 msgid "cannot change private flag on existing secret" msgstr "기존 비밀정보의 개인용 플래그를 변경할 수 없음" #: src/secret/secret_driver.c:781 msgid "list of secrets is inconsistent" msgstr "비밀정보 목록이 일관성이 없습니다" #: src/secret/secret_driver.c:908 #, c-format msgid "secret '%s' does not have a value" msgstr "비밀정보 '%s'는 값을 가지고 있지 않습니다" #: src/secret/secret_driver.c:915 msgid "secret is private" msgstr "비밀정보가 개인용입니다" #: src/secret/secret_driver.c:1030 msgid "Out of memory initializing secrets" msgstr "비밀정보 초기화 중 메모리 부족" #: src/security/security_apparmor.c:95 #, c-format msgid "Failed to read AppArmor profiles list '%s'" msgstr "AppArmor 프로파일 목록 '%s' 읽기 실패" #: src/security/security_apparmor.c:144 #, c-format msgid "Failed to read '%s'" msgstr "'%s' 읽기 실패" #: src/security/security_apparmor.c:252 msgid "could not find libvirtd" msgstr "libvirtd를 찾을 수 없음" #: src/security/security_apparmor.c:293 src/security/security_apparmor.c:322 #: src/security/security_apparmor.c:344 src/security/security_apparmor.c:697 #, c-format msgid "cannot update AppArmor profile '%s'" msgstr "AppArmor프로파일 '%s'를 업데이트 할 수 없음" #: src/security/security_apparmor.c:373 #, c-format msgid "template '%s' does not exist" msgstr "템플릿 '%s'는 존재하지 않습니다" #: src/security/security_apparmor.c:434 msgid "Cannot set a base label with AppArmour" msgstr "" #: src/security/security_apparmor.c:442 src/security/security_selinux.c:487 msgid "security label already defined for VM" msgstr "보안 레이블이 VM에 대해 이미 정의되었습니다" #: src/security/security_apparmor.c:472 #, fuzzy, c-format msgid "cannot load AppArmor profile '%s'" msgstr "AppArmor프로파일 '%s'를 업데이트 할 수 없음" #: src/security/security_apparmor.c:529 msgid "error copying profile name" msgstr "프로파일 이름 복사 중 오류" #: src/security/security_apparmor.c:535 msgid "error calling profile_status()" msgstr "profile_status() 호출 중 오류" #: src/security/security_apparmor.c:581 #, c-format msgid "could not remove profile for '%s'" msgstr "'%s'에 대한 프로파일을 삭제할 수 없" #: src/security/security_apparmor.c:607 src/security/security_selinux.c:1492 #: src/security/security_selinux.c:1526 src/security/security_selinux.c:1565 #: src/security/security_selinux.c:1636 src/security/security_selinux.c:1677 #, c-format msgid "" "security label driver mismatch: '%s' model configured for domain, but " "hypervisor driver is '%s'." msgstr "" "보안 레이블 드라이버가 일치하지 않습니다: 도메인은 '%s' 모델로 설정되었으나, " "하이퍼바이저 드라이버는 '%s'입니다" #: src/security/security_apparmor.c:617 msgid "error calling aa_change_profile()" msgstr "aa_change_profile() 호출하는 중 오류" #: src/security/security_apparmor.c:685 #, c-format msgid "'%s' does not exist" msgstr "'%s'가 존재하지 않습니다" #: src/security/security_apparmor.c:725 #, c-format msgid "Invalid security label '%s'" msgstr "잘못된 않은 보안 레이블 '%s'" #: src/security/security_dac.c:106 src/security/security_dac.c:157 #, fuzzy, c-format msgid "security label for DAC not found in domain %s" msgstr "보안 모델 찾을 수 없음: %s" #: src/security/security_dac.c:113 src/security/security_dac.c:165 #, fuzzy, c-format msgid "failed to parse uid and gid for DAC security driver: %s" msgstr "보안 드라이버 시작 실패" #: src/security/security_dac.c:257 #, fuzzy, c-format msgid "unable to set user and group to '%ld:%ld' on '%s'" msgstr "보안 문맥 '%d:%d\"를 '%s'상에 설정할 수 없음" #: src/security/security_dac.c:277 #, c-format msgid "cannot resolve symlink %s" msgstr "심볼릭 링크 %s를 찾을 수 없음" #: src/security/security_dac.c:845 src/security/security_selinux.c:472 #, fuzzy msgid "invalid security driver" msgstr "유효하지 않은 보안 유형 " #: src/security/security_dac.c:856 src/security/security_selinux.c:493 #, fuzzy msgid "security image label already defined for VM" msgstr "보안 레이블이 VM에 대해 이미 정의되었습니다" #: src/security/security_dac.c:864 src/security/security_selinux.c:500 #, fuzzy, c-format msgid "security label model %s is not supported with selinux" msgstr "비디오 유형 %s는 QEMU가 지원하지 않습니다" #: src/security/security_dac.c:874 #, c-format msgid "missing label for static security driver in domain %s" msgstr "" #: src/security/security_dac.c:886 src/security/security_dac.c:906 #, fuzzy, c-format msgid "cannot generate dac user and group id for domain %s" msgstr "컨테이너에 대한 eth 이름을 생성할 수 없음" #: src/security/security_dac.c:896 src/security/security_selinux.c:548 #, fuzzy, c-format msgid "unexpected security label type '%s'" msgstr "예기치 못한 비밀 사용 유형 %d" #: src/security/security_driver.c:77 #, fuzzy, c-format msgid "Security driver %s not enabled" msgstr "보안 모델 찾을 수 없음" #: src/security/security_driver.c:90 #, fuzzy, c-format msgid "Security driver %s not found" msgstr "보안 모델 찾을 수 없음" #: src/security/security_manager.c:141 #, fuzzy msgid "Security driver \"none\" cannot create confined guests" msgstr "보안 모델 찾을 수 없음" #: src/security/security_manager.c:354 #, fuzzy msgid "Unconfined guests are not allowed on this host" msgstr "이 플랫폼에 사용 가능한 NUMA 메모리 정보가 없음" #: src/security/security_selinux.c:116 src/security/security_selinux.c:257 #, fuzzy msgid "Unable to get current process SELinux context" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/security/security_selinux.c:121 src/security/security_selinux.c:262 #, fuzzy, c-format msgid "Unable to parse current SELinux context '%s'" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/security/security_selinux.c:134 #, fuzzy, c-format msgid "Cannot parse sensitivity level in %s" msgstr "메모리 수준 '%s'를 구문분석 할 수 없음" #: src/security/security_selinux.c:149 src/security/security_selinux.c:156 #: src/security/security_selinux.c:172 src/security/security_selinux.c:179 #: src/security/security_selinux.c:186 #, fuzzy, c-format msgid "Cannot parse category in %s" msgstr "컨트롤러 인덱스 %s를 구문 분석할 수 없습니다" #: src/security/security_selinux.c:165 #, fuzzy msgid "No category range available" msgstr "보안 드라이버가 사용 가능하지 않음" #: src/security/security_selinux.c:196 #, c-format msgid "Category range c%d-c%d too small" msgstr "" #: src/security/security_selinux.c:270 #, fuzzy, c-format msgid "Unable to parse base SELinux context '%s'" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/security/security_selinux.c:278 #, fuzzy, c-format msgid "Unable to set SELinux context user '%s'" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/security/security_selinux.c:287 #, fuzzy, c-format msgid "Unable to set SELinux context role '%s'" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/security/security_selinux.c:294 #, fuzzy, c-format msgid "Unable to set SELinux context MCS '%s'" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/security/security_selinux.c:300 #, fuzzy msgid "Unable to format SELinux context" msgstr "파이프를 생성할 수 없" #: src/security/security_selinux.c:329 #, fuzzy, c-format msgid "cannot open SELinux lxc contexts file '%s'" msgstr "SELinux 가상 도메인 문맥 파일 '%s'를 열 수 없음" #: src/security/security_selinux.c:337 #, fuzzy, c-format msgid "cannot read 'process' value from selinux lxc contexts file '%s'" msgstr "SELinux 가상 도메인 문맥 파일 '%s'를 읽을 수 없음" #: src/security/security_selinux.c:345 src/security/security_selinux.c:353 #, fuzzy, c-format msgid "cannot read 'file' value from selinux lxc contexts file '%s'" msgstr "SELinux 가상 도메인 문맥 파일 '%s'를 읽을 수 없음" #: src/security/security_selinux.c:365 #, fuzzy, c-format msgid "cannot allocate memory for LXC SELinux contexts '%s'" msgstr "'%s'의 출력을 위한 메모리를 할당할 수 없습니다" #: src/security/security_selinux.c:389 #, fuzzy msgid "libselinux does not support LXC contexts path" msgstr "xen 버스는 %s 입력 장치를 지원하지 않음 " #: src/security/security_selinux.c:403 #, fuzzy, c-format msgid "cannot read SELinux virtual domain context file '%s'" msgstr "SELinux 가상 도메인 문맥 파일 '%s'를 읽을 수 없음" #: src/security/security_selinux.c:414 #, c-format msgid "cannot read SELinux virtual image context file %s" msgstr "SELinux 가상 이미지 문맥 파일 '%s'를 읽을 수 없음" #: src/security/security_selinux.c:511 src/security/security_selinux.c:1574 #, fuzzy, c-format msgid "unable to allocate socket security context '%s'" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/security/security_selinux.c:537 src/security/security_selinux.c:559 #, c-format msgid "cannot generate selinux context for %s" msgstr "%s에 대한 selinux 문맥을 생성할 수 없음" #: src/security/security_selinux.c:617 src/security/security_selinux.c:718 #, c-format msgid "unable to get PID %d security context" msgstr "PID %d 보안 문맥을 얻을 수 없음" #: src/security/security_selinux.c:635 #, c-format msgid "MCS level for existing domain label %s already reserved" msgstr "" #: src/security/security_selinux.c:725 #, c-format msgid "security label exceeds maximum length: %d" msgstr "보안 레이블이 최대 길이를 넘어감: %d" #: src/security/security_selinux.c:739 msgid "error calling security_getenforce()" msgstr "security_getenforce() 호출 중 오류" #: src/security/security_selinux.c:776 #, c-format msgid "unable to set security context '%s' on '%s'" msgstr "보안 문맥 '%s'를 '%s'상에 설정할 수 없음" #: src/security/security_selinux.c:785 #, fuzzy, c-format msgid "" "Setting security context '%s' on '%s' not supported. Consider setting " "virt_use_nfs" msgstr "보안 문맥 '%s'를 '%s'상에 설정할 수 없음" #: src/security/security_selinux.c:841 #, fuzzy, c-format msgid "unable to set security context '%s' on fd %d" msgstr "보안 문맥 '%s'를 '%s'상에 설정할 수 없음" #: src/security/security_selinux.c:1352 src/security/security_selinux.c:1734 #, fuzzy, c-format msgid "unknown smartcard type %d" msgstr "알려지지 않은 저장 볼륨 유형 %d" #: src/security/security_selinux.c:1502 #, c-format msgid "Invalid security label %s" msgstr "잘못된 않은 보안 레이블 %s" #: src/security/security_selinux.c:1536 #, c-format msgid "unable to set security context '%s'" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/security/security_selinux.c:1581 #, fuzzy, c-format msgid "unable to get current process context '%s'" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/security/security_selinux.c:1588 src/security/security_selinux.c:1604 #: src/security/security_selinux.c:1647 #, fuzzy, c-format msgid "unable to set socket security context '%s'" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/security/security_selinux.c:1595 #, fuzzy, c-format msgid "unable to set socket security context range '%s'" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/security/security_selinux.c:1687 #, fuzzy, c-format msgid "unable to clear socket security context '%s'" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/security/virt-aa-helper.c:103 #, c-format msgid "" "\n" "%s [options] [< def.xml]\n" "\n" " Options:\n" " -a | --add load profile\n" " -c | --create create profile from template\n" " -D | --delete unload and delete profile\n" " -f | --add-file add file to profile\n" " -F | --append-file append file to profile\n" " -r | --replace reload profile\n" " -R | --remove unload profile\n" " -h | --help this help\n" " -u | --uuid uuid (profile name)\n" "\n" msgstr "" #: src/security/virt-aa-helper.c:116 msgid "" "This command is intended to be used by libvirtd and not used directly.\n" msgstr "" #: src/security/virt-aa-helper.c:124 #, fuzzy, c-format msgid "%s: error: %s%c" msgstr "%s: 오류: %s\n" #: src/security/virt-aa-helper.c:136 #, fuzzy, c-format msgid "%s: warning: %s%c" msgstr "%s: 경고: %s\n" #: src/security/virt-aa-helper.c:142 #, fuzzy, c-format msgid "" "%s:\n" "%s%c" msgstr "" "%s:\n" "%s\n" #: src/security/virt-aa-helper.c:159 #, fuzzy msgid "could not find replacement string" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/security/virt-aa-helper.c:164 #, fuzzy msgid "could not allocate memory for string" msgstr "'%s'의 출력을 위한 메모리를 할당할 수 없습니다" #: src/security/virt-aa-helper.c:176 src/security/virt-aa-helper.c:184 msgid "not enough space in target buffer" msgstr "" #: src/security/virt-aa-helper.c:192 #, fuzzy msgid "error replacing string" msgstr "비밀정보 읽기 오류: %s" #: src/security/virt-aa-helper.c:214 #, fuzzy msgid "invalid flag" msgstr "잘못된 경로" #: src/security/virt-aa-helper.c:222 #, fuzzy msgid "profile name exceeds maximum length" msgstr "보안 레이블이 최대 길이를 넘어감: %d" #: src/security/virt-aa-helper.c:227 #, fuzzy msgid "profile does not exist" msgstr "인터페이스 %s가 존재하지 않습니다" #: src/security/virt-aa-helper.c:236 #, fuzzy msgid "failed to run apparmor_parser" msgstr "'%s' 읽기 실패" #: src/security/virt-aa-helper.c:240 msgid "unable to unload already unloaded profile" msgstr "" #: src/security/virt-aa-helper.c:242 msgid "apparmor_parser exited with error" msgstr "" #: src/security/virt-aa-helper.c:279 src/security/virt-aa-helper.c:284 #: src/security/virt-aa-helper.c:395 #, fuzzy msgid "could not allocate memory for profile" msgstr "'%s'의 출력을 위한 메모리를 할당할 수 없습니다" #: src/security/virt-aa-helper.c:291 src/security/virt-aa-helper.c:390 #, fuzzy msgid "invalid length for new profile" msgstr "잘못된 네트워크 포인터" #: src/security/virt-aa-helper.c:303 #, fuzzy msgid "failed to create include file" msgstr "로그파일 %s를 생성하는 데 실패" #: src/security/virt-aa-helper.c:309 src/security/virt-aa-helper.c:415 #, fuzzy msgid "failed to write to profile" msgstr "로그 파일 쓰기 실패" #: src/security/virt-aa-helper.c:314 src/security/virt-aa-helper.c:420 #, fuzzy msgid "failed to close or write to profile" msgstr "로그 파일 쓰기 실패" #: src/security/virt-aa-helper.c:345 src/security/virt-aa-helper.c:1225 msgid "profile exists" msgstr "" #: src/security/virt-aa-helper.c:350 #, fuzzy msgid "template name exceeds maximum length" msgstr "보안 레이블이 최대 길이를 넘어감: %d" #: src/security/virt-aa-helper.c:355 #, fuzzy msgid "template does not exist" msgstr "템플릿 '%s'는 존재하지 않습니다" #: src/security/virt-aa-helper.c:360 #, fuzzy msgid "failed to read AppArmor template" msgstr "프락시 응답을 읽는 데 실패" #: src/security/virt-aa-helper.c:365 src/security/virt-aa-helper.c:370 msgid "no replacement string in template" msgstr "" #: src/security/virt-aa-helper.c:376 #, fuzzy msgid "could not allocate memory for profile name" msgstr "'%s'의 출력을 위한 메모리를 할당할 수 없습니다" #: src/security/virt-aa-helper.c:382 #, fuzzy msgid "could not allocate memory for profile files" msgstr "'%s'의 출력을 위한 메모리를 할당할 수 없습니다" #: src/security/virt-aa-helper.c:409 #, fuzzy msgid "failed to create profile" msgstr "로그파일 %s를 생성하는 데 실패" #: src/security/virt-aa-helper.c:560 msgid "bad pathname" msgstr "" #: src/security/virt-aa-helper.c:575 msgid "path does not exist, skipping file type checks" msgstr "" #: src/security/virt-aa-helper.c:615 #, fuzzy msgid "Invalid context" msgstr "잘못된 비밀정보" #: src/security/virt-aa-helper.c:621 #, fuzzy msgid "Could not find " msgstr "일치하는 장치를 찾을 수 없음" #: src/security/virt-aa-helper.c:628 #, fuzzy msgid "Could not find " msgstr "libvirtd를 찾을 수 없음" #: src/security/virt-aa-helper.c:660 #, fuzzy msgid "unexpected root element, expecting " msgstr "예기치 못한 도메인 유형 %d" #: src/security/virt-aa-helper.c:670 msgid "os.type is not 'hvm'" msgstr "" #: src/security/virt-aa-helper.c:683 src/security/virt-aa-helper.c:720 #: src/security/virt-aa-helper.c:734 src/security/virt-aa-helper.c:828 #: src/security/virt-aa-helper.c:837 src/security/virt-aa-helper.c:912 #: src/security/virt-aa-helper.c:1207 src/security/virt-aa-helper.c:1211 #: src/security/virt-aa-helper.c:1271 #, fuzzy msgid "could not allocate memory" msgstr "메모리 할당 실패" #: src/security/virt-aa-helper.c:741 #, fuzzy msgid "could not parse XML" msgstr "XML 구문 분석에 실패" #: src/security/virt-aa-helper.c:746 #, fuzzy msgid "could not find name in XML" msgstr "libvirtd를 찾을 수 없음" #: src/security/virt-aa-helper.c:751 msgid "bad name" msgstr "" #: src/security/virt-aa-helper.c:777 #, fuzzy msgid "skipped non-absolute path" msgstr "분리자 예상하기" #: src/security/virt-aa-helper.c:784 #, fuzzy msgid "could not find realpath for disk" msgstr "'%s'에 대한 부모 HBA를 찾을 수 없습니다" #: src/security/virt-aa-helper.c:798 msgid "skipped restricted file" msgstr "" #: src/security/virt-aa-helper.c:917 msgid "given uuid does not match XML uuid" msgstr "" #: src/security/virt-aa-helper.c:1053 #, fuzzy msgid "failed to allocate file buffer" msgstr "XML 버퍼 할당에 실패" #: src/security/virt-aa-helper.c:1102 #, fuzzy msgid "could not allocate memory for disk" msgstr "'%s'의 출력을 위한 메모리를 할당할 수 없습니다" #: src/security/virt-aa-helper.c:1117 src/security/virt-aa-helper.c:1137 #, fuzzy msgid "invalid UUID" msgstr "잘못된 경로: %s" #: src/security/virt-aa-helper.c:1120 #, fuzzy msgid "error copying UUID" msgstr "'%s' 닫는 중 오류" #: src/security/virt-aa-helper.c:1129 #, fuzzy msgid "unsupported option" msgstr "지원하지 않는 설정" #: src/security/virt-aa-helper.c:1134 #, fuzzy msgid "bad command" msgstr "명령 이름" #: src/security/virt-aa-helper.c:1147 #, fuzzy msgid "could not read xml file" msgstr "CPU 플래그를 읽을 수 없음" #: src/security/virt-aa-helper.c:1151 #, fuzzy msgid "could not get VM definition" msgstr "도메인 상태를 얻는 데 실패" #: src/security/virt-aa-helper.c:1156 #, fuzzy msgid "invalid VM definition" msgstr "잘못된 CPU 정의" #: src/security/virt-aa-helper.c:1188 #, fuzzy msgid "could not set PATH" msgstr "UUID를 설정할 수 없음" #: src/security/virt-aa-helper.c:1192 #, fuzzy msgid "could not set IFS" msgstr "UUID를 설정할 수 없음" #: src/security/virt-aa-helper.c:1203 #, fuzzy msgid "could not parse arguments" msgstr "%s에 인자를 넣을 수 없음" #: src/security/virt-aa-helper.c:1250 #, fuzzy msgid "failed to allocate buffer" msgstr "XML 버퍼 할당에 실패" #: src/security/virt-aa-helper.c:1281 #, fuzzy msgid "could not create profile" msgstr "veth 이름을 생성할 수 없음" #: src/storage/parthelper.c:82 #, c-format msgid "syntax: %s DEVICE [-g]\n" msgstr "" #: src/storage/parthelper.c:103 #, fuzzy, c-format msgid "unable to access device %s\n" msgstr "%s 장치를 허용할 수 없음" #: src/storage/parthelper.c:117 #, fuzzy, c-format msgid "unable to access disk %s\n" msgstr "모니터 경로 %s를 열 수 없음" #: src/storage/storage_backend.c:151 #, c-format msgid "could not open input path '%s'" msgstr "입력 경로 '%s'를 열 수 없음" #: src/storage/storage_backend.c:187 #, c-format msgid "failed reading from file '%s'" msgstr "파일 '%s'에서 읽기 실패" #: src/storage/storage_backend.c:204 src/storage/storage_backend.c:324 #, c-format msgid "cannot extend file '%s'" msgstr "파일 '%s'를 확장할 수 없음" #: src/storage/storage_backend.c:211 #, c-format msgid "failed writing to file '%s'" msgstr "파일 '%s'에 쓰기 실패" #: src/storage/storage_backend.c:221 src/storage/storage_backend.c:371 #, c-format msgid "cannot sync data to file '%s'" msgstr "데이터를 파일 '%s'에 동기화할 수 없음" #: src/storage/storage_backend.c:230 src/storage/storage_backend.c:299 #: src/storage/storage_backend_logical.c:761 #, c-format msgid "cannot close file '%s'" msgstr "파일 '%s'를 닫을 수 없음" #: src/storage/storage_backend.c:263 src/storage/storage_backend.c:411 #: src/storage/storage_backend_fs.c:773 src/storage/storage_backend_fs.c:790 #: src/storage/storage_backend_fs.c:1045 #, c-format msgid "cannot create path '%s'" msgstr "경로 %s를 생성할 수 없음" #: src/storage/storage_backend.c:278 src/util/util.c:793 src/util/util.c:1096 #: src/util/util.c:1192 #, c-format msgid "stat of '%s' failed" msgstr "'%s'에 대한 stat이 실패했습니다" #: src/storage/storage_backend.c:287 src/util/util.c:804 src/util/util.c:1102 #, c-format msgid "cannot chown '%s' to (%u, %u)" msgstr "'%s'를 (%u, %u)로 chown할 수 없음" #: src/storage/storage_backend.c:293 src/storage/storage_backend.c:605 #: src/util/util.c:815 src/util/util.c:1110 src/util/util.c:1205 #, c-format msgid "cannot set mode of '%s' to %04o" msgstr "'%s'의 모드를 %04o로 설정할 수 없음" #: src/storage/storage_backend.c:352 src/storage/storage_backend.c:361 #, c-format msgid "cannot fill file '%s'" msgstr "파일 '%s'를 채울 수 없음" #: src/storage/storage_backend.c:395 src/storage/storage_backend_disk.c:647 #: src/storage/storage_backend_logical.c:705 #: src/storage/storage_backend_rbd.c:434 msgid "storage pool does not support encrypted volumes" msgstr "저장소 풀이 암호화된 볼륨을 지원하지 않음" #: src/storage/storage_backend.c:446 msgid "too many conflicts when generating an uuid" msgstr "uuid 생성 중 너무 많은 충돌 발생" #: src/storage/storage_backend.c:476 msgid "secrets already defined" msgstr "비밀정보가 이미 정의되었습니다" #: src/storage/storage_backend.c:589 #, fuzzy, c-format msgid "failed to create %s" msgstr "'%s' 생성 실패" #: src/storage/storage_backend.c:599 #, c-format msgid "cannot chown %s to (%u, %u)" msgstr "%s를 (%u, %u)로 chown할 수 없음" #: src/storage/storage_backend.c:641 #, fuzzy, c-format msgid "unable to parse qemu-img output '%s'" msgstr "보안 문맥 '%s'를 설정할 수 없음" #: src/storage/storage_backend.c:692 src/storage/storage_backend.c:698 #, c-format msgid "unknown storage vol type %d" msgstr "알려지지 않은 저장 볼륨 유형 %d" #: src/storage/storage_backend.c:715 #, fuzzy msgid "a different backing store cannot be specified." msgstr "다른 종류의 보조 기억이 지정될 수 없습니다" #: src/storage/storage_backend.c:722 #, c-format msgid "unknown storage vol backing store type %d" msgstr "알려지지 않은 저장소 볼륨 보조 기억 유형 %d" #: src/storage/storage_backend.c:741 #, c-format msgid "inaccessible backing store volume %s" msgstr "억세스할 수 없는 보조 기억 불륨 %s" #: src/storage/storage_backend.c:753 #, c-format msgid "qcow volume encryption unsupported with volume format %s" msgstr "qcow 볼륨 암호화가 볼륨 형식 %s와 지원되지 않음" #: src/storage/storage_backend.c:761 #, c-format msgid "unsupported volume encryption format %d" msgstr "지원하지 않는 볼륨 암호화 형식 %d" #: src/storage/storage_backend.c:767 msgid "too many secrets for qcow encryption" msgstr "qcow 암호화에 대해 너무 많은 비밀 정보" #: src/storage/storage_backend.c:881 msgid "cannot copy from volume with qcow-create" msgstr "qcow-create로 볼륨으로부터 복사할 수 없음" #: src/storage/storage_backend.c:887 #, c-format msgid "unsupported storage vol type %d" msgstr "지원하지 않는 저장소 볼륨 유형 %d" #: src/storage/storage_backend.c:893 msgid "copy-on-write image not supported with qcow-create" msgstr "qcow-create와 함께 copy-on-write(쓰기시 복사) 이미지가 지원되지 않음" #: src/storage/storage_backend.c:899 msgid "encrypted volumes not supported with qcow-create" msgstr "암호화된 볼륨은 qcow-create와 함께 지원되지 않음" #: src/storage/storage_backend.c:931 #, c-format msgid "Unknown file create tool type '%d'." msgstr "알려지지 않은 파일 생성 도구 유형 '%d'." #: src/storage/storage_backend.c:979 msgid "creation of non-raw file images is not supported without qemu-img." msgstr "" "qemu-img가 없이 로우(raw) 파일이 아닌 이미지의 생성은 지원되지 않습니다." #: src/storage/storage_backend.c:1043 #, c-format msgid "cannot open volume '%s'" msgstr "볼륨 '%s'를 열 수 없음" #: src/storage/storage_backend.c:1079 #, fuzzy, c-format msgid "unexpected storage mode for '%s'" msgstr "예기치 못한 hostdev 모드 %d" #: src/storage/storage_backend.c:1203 #, c-format msgid "cannot seek to end of file '%s'" msgstr "파일 '%s'의 끝으로 seek할 수 없음" #: src/storage/storage_backend.c:1233 #, c-format msgid "cannot get file context of '%s'" msgstr "파일 '%s'의 문맥을 얻을 수 없음" #: src/storage/storage_backend.c:1303 #, c-format msgid "cannot seek to beginning of file '%s'" msgstr "파일 '%s'의 시작 부분으로 이동할 수 없습니다" #: src/storage/storage_backend.c:1310 #, c-format msgid "cannot read beginning of file '%s'" msgstr "파일 '%s'의 시작 부분을 읽을 수 없음" #: src/storage/storage_backend.c:1379 #, c-format msgid "cannot read dir '%s'" msgstr "'%s' 디렉터리를 읽을 수 없음" #: src/storage/storage_backend.c:1463 #: src/storage/storage_backend_logical.c:212 #, c-format msgid "Failed to compile regex %s" msgstr "정규식 %s를 컴파일하는 데 실패" #: src/storage/storage_backend.c:1493 msgid "cannot read fd" msgstr "fd에서 읽을 수 없음" #: src/storage/storage_backend.c:1605 #, fuzzy msgid "cannot open file using fd" msgstr "파일 '%s'를 열 수 없음" #: src/storage/storage_backend.c:1636 #, fuzzy msgid "read error on pipe" msgstr "'%s'에 대한 파이프 읽기 실패" #: src/storage/storage_backend.c:1665 src/storage/storage_backend.c:1678 #, c-format msgid "%s not implemented on Win32" msgstr "%s은 Win32상에서 구현되지 않음" #: src/storage/storage_backend_disk.c:110 msgid "cannot parse device start location" msgstr "장치 시작 위치를 구문분석할 수 없음" #: src/storage/storage_backend_disk.c:117 msgid "cannot parse device end location" msgstr "장치 끝 위치를 구문분석할 수 없음" #: src/storage/storage_backend_disk.c:331 #, fuzzy, c-format msgid "device path '%s' doesn't exist" msgstr "템플릿 '%s'는 존재하지 않습니다" #: src/storage/storage_backend_disk.c:403 src/storage/storage_backend_fs.c:752 msgid "Overwrite and no overwrite flags are mutually exclusive" msgstr "" #: src/storage/storage_backend_disk.c:419 #, fuzzy msgid "Error checking for disk label" msgstr "프로파일 이름 복사 중 오류" #: src/storage/storage_backend_disk.c:422 #, fuzzy msgid "Disk label already present" msgstr "저장소 볼륨이 이미 존재합니다" #: src/storage/storage_backend_disk.c:472 msgid "Invalid partition type" msgstr "잘못된 파티션 유형" #: src/storage/storage_backend_disk.c:481 msgid "extended partition already exists" msgstr "확장 파티션이 이미 존재합니다" #: src/storage/storage_backend_disk.c:516 msgid "no extended partition found and no primary partition available" msgstr "확장 파티션을 찾지 못했으며, 기본 파티션도 사용할 수 없습니다" #: src/storage/storage_backend_disk.c:522 #, fuzzy msgid "unknown partition type" msgstr "알려지지 않은 매개변수 유형" #: src/storage/storage_backend_disk.c:606 msgid "no large enough free extent" msgstr "충분히 큰 확장 공간을 가지고 있지 않습니다" #: src/storage/storage_backend_disk.c:724 #, c-format msgid "Couldn't read volume target path '%s'" msgstr "볼륨 목적 경로 '%s'를 읽을 수 없습니다" #: src/storage/storage_backend_disk.c:737 #, c-format msgid "Volume path '%s' did not start with parent pool source device name." msgstr "볼륨 경로 '%s'가 부모 풀 소스 장치 이름으로 시작하지 않습니다." #: src/storage/storage_backend_disk.c:747 #, c-format msgid "cannot parse partition number from target '%s'" msgstr "타겟 '%s'에서 파티션 번호를 구문분석할 수 없습니다" #: src/storage/storage_backend_fs.c:117 #, fuzzy, c-format msgid "cannot probe backing volume format: %s" msgstr "%s의 값 구문 분석 실패" #: src/storage/storage_backend_fs.c:195 #, c-format msgid "invalid netfs path (no /): %s" msgstr "잘못된 netfs 경로 (/ 없음): %s" #: src/storage/storage_backend_fs.c:201 #, c-format msgid "invalid netfs path (ends in /): %s" msgstr "잘못된 netfs 경로(/로 끝남): %s" #: src/storage/storage_backend_fs.c:263 src/test/test_driver.c:4063 #, fuzzy msgid "hostname must be specified for netfs sources" msgstr "장치 주소 유형이 지정되지 않았습니다" #: src/storage/storage_backend_fs.c:273 src/storage/storage_backend_fs.c:364 #: src/storage/storage_backend_fs.c:461 #: src/storage/storage_backend_iscsi.c:101 #: src/storage/storage_backend_iscsi.c:598 #: src/storage/storage_backend_iscsi.c:662 #: src/storage/storage_backend_iscsi.c:700 msgid "Expected exactly 1 host for the storage pool" msgstr "" #: src/storage/storage_backend_fs.c:323 #, c-format msgid "cannot read mount list '%s'" msgstr "'%s' 마운트 목록을 읽을 수 없음" #: src/storage/storage_backend_fs.c:369 src/storage/storage_backend_fs.c:466 #: src/storage/storage_backend_iscsi.c:668 #: src/storage/storage_backend_iscsi.c:706 msgid "missing source host" msgstr "소스 호스트가 빠짐" #: src/storage/storage_backend_fs.c:374 msgid "missing source path" msgstr "소스 경로가 빠짐" #: src/storage/storage_backend_fs.c:380 src/storage/storage_backend_fs.c:477 #: src/storage/storage_backend_iscsi.c:675 #: src/storage/storage_backend_iscsi.c:713 msgid "missing source device" msgstr "소스 장치가 빠짐" #: src/storage/storage_backend_fs.c:388 #, fuzzy, c-format msgid "Target '%s' is already mounted" msgstr "타겟 %s가 이미 존재합니다" #: src/storage/storage_backend_fs.c:471 msgid "missing source dir" msgstr "소스 디렉터리가 빠짐" #: src/storage/storage_backend_fs.c:566 #, fuzzy, c-format msgid "Not capable of probing for filesystem of type %s" msgstr "알려지지 않은 파일 시스템 유형 '%s'" #: src/storage/storage_backend_fs.c:575 #, fuzzy, c-format msgid "Failed to create filesystem probe for device %s" msgstr "PCI 장치 '%s'를 다시 감지하도록 하는 데 실패했습니다" #: src/storage/storage_backend_fs.c:599 #, fuzzy, c-format msgid "Existing filesystem of type '%s' found on device '%s'" msgstr "지원하지 않는 데이터 타입 '%c'가 인자 '%s'에 대해 사용됨" #: src/storage/storage_backend_fs.c:607 msgid "Found additional probes to run, filesystem probing may be incorrect" msgstr "" #: src/storage/storage_backend_fs.c:629 #, fuzzy msgid "probing for filesystems is unsupported by this build" msgstr "비디오 유형 %s는 QEMU가 지원하지 않습니다" #: src/storage/storage_backend_fs.c:654 #, fuzzy, c-format msgid "Failed to make filesystem of type '%s' on device '%s'" msgstr "노드 장치 '%s'를 파괴하는 데 실패" #: src/storage/storage_backend_fs.c:667 #, c-format msgid "" "mkfs is not supported on this platform: Failed to make filesystem of type " "'%s' on device '%s'" msgstr "" #: src/storage/storage_backend_fs.c:685 #, fuzzy, c-format msgid "No source device specified when formatting pool '%s'" msgstr "이름이 '%s'와 일치하는 노드 디바이스가 없음" #: src/storage/storage_backend_fs.c:696 #, c-format msgid "Source device does not exist when formatting pool '%s'" msgstr "" #: src/storage/storage_backend_fs.c:763 #, c-format msgid "path '%s' is not absolute" msgstr "경로 '%s'가 절대경로가 아닙니다" #: src/storage/storage_backend_fs.c:895 #, fuzzy, c-format msgid "cannot probe backing volume info: %s" msgstr "%s의 값 구문 분석 실패" #: src/storage/storage_backend_fs.c:981 #, c-format msgid "failed to remove pool '%s'" msgstr "풀 '%s'을 제거하는 데 실패" #: src/storage/storage_backend_fs.c:1035 msgid "cannot copy from volume to a directory volume" msgstr "볼륨을 디렉터리 볼륨으로 복사할 수 없습니다" #: src/storage/storage_backend_fs.c:1065 msgid "" "storage pool does not support building encrypted volumes from other volumes" msgstr "" "저장소 풀이 다른 볼륨에서 암호화된 볼륨을 만드는 것을 지원하지 않습니다" #: src/storage/storage_backend_fs.c:1085 msgid "creation of non-raw images is not supported without qemu-img" msgstr "" "qemu-img가 없이 로우(raw)가 아닌 이미지를 만드는 것을 지원하지 않습니다" #: src/storage/storage_backend_fs.c:1139 #, c-format msgid "cannot unlink file '%s'" msgstr "파일 '%s'를 unlink할 수 없음" #: src/storage/storage_backend_fs.c:1148 #, fuzzy, c-format msgid "cannot remove directory '%s'" msgstr "디렉터리 %s를 생성할 수 없음" #: src/storage/storage_backend_fs.c:1157 #, fuzzy, c-format msgid "removing block or network volumes is not supported: %s" msgstr "" "qemu-img가 없이 로우(raw) 파일이 아닌 이미지의 생성은 지원되지 않습니다." #: src/storage/storage_backend_iscsi.c:67 #, c-format msgid "host lookup failed %s" msgstr "호스트 검색이 실패했습니다 %s" #: src/storage/storage_backend_iscsi.c:74 #, c-format msgid "no IP address for target %s" msgstr "타겟 %s에 대해 IP 주소가 없음" #: src/storage/storage_backend_iscsi.c:83 #, c-format msgid "cannot format ip addr for %s" msgstr "%s에 대한 ip 주소 형태를 만들 수 없음" #: src/storage/storage_backend_iscsi.c:174 msgid "cannot find session" msgstr "세션을 찾을 수 없음" #: src/storage/storage_backend_iscsi.c:200 #, c-format msgid "Could not allocate memory for output of '%s'" msgstr "'%s'의 출력을 위한 메모리를 할당할 수 없습니다" #: src/storage/storage_backend_iscsi.c:215 #, c-format msgid "" "Failed to open stream for file descriptor when reading output from '%s': '%s'" msgstr "" "'%s'로부터의 출력을 읽는 도중에 파일 디스크립터에 대한 스트림을 여는 데 실패" "했습니다: '%s'" #: src/storage/storage_backend_iscsi.c:227 #, c-format msgid "Unexpected line > %d characters when parsing output of '%s'" msgstr "예기치 못한 줄 > %d 문자가 '%s'의 출력을 구문분석 하는 중 나왔습니다" #: src/storage/storage_backend_iscsi.c:245 #, fuzzy, c-format msgid "Missing space when parsing output of '%s'" msgstr "예기치 못한 줄 > %d 문자가 '%s'의 출력을 구문분석 하는 중 나왔습니다" #: src/storage/storage_backend_iscsi.c:307 #, c-format msgid "Failed to run command '%s' to create new iscsi interface" msgstr "" "새 iscsi 인터페이스를 만들기 위해 명령어 '%s'를 실행하는 데 실패했습니다" #: src/storage/storage_backend_iscsi.c:326 #, c-format msgid "Failed to run command '%s' to update iscsi interface with IQN '%s'" msgstr "" "IQN '%s'인 iscsi 인터페이스를 갱신하기 위해 '%s' 명령을 실행하는 데 실패했습" "니다" #: src/storage/storage_backend_iscsi.c:421 #, c-format msgid "Failed to get host number for iSCSI session with path '%s'" msgstr "경로 '%s'로 된 iSCSI 세션의 호스트 번호를 얻는 데 실패했습니다" #: src/storage/storage_backend_iscsi.c:429 #, c-format msgid "Failed to find LUs on host %u" msgstr "호스트 %u상의 LU를 찾는데 실패" #: src/storage/storage_backend_iscsi.c:587 #, fuzzy msgid "hostname and device path must be specified for iscsi sources" msgstr "장치 주소 유형이 지정되지 않았습니다" #: src/storage/storage_backend_logical.c:152 #, fuzzy msgid "malformed volume extent stripes value" msgstr "잘못된 형식의 볼륨 확장 크기 값" #: src/storage/storage_backend_logical.c:166 msgid "malformed volume extent length value" msgstr "잘못된 형식의 볼륨 확장 길이 값" #: src/storage/storage_backend_logical.c:171 msgid "malformed volume extent size value" msgstr "잘못된 형식의 볼륨 확장 크기 값" #: src/storage/storage_backend_logical.c:176 #, fuzzy msgid "malformed volume allocation value" msgstr "잘못된 형식의 볼륨 확장 크기 값" #: src/storage/storage_backend_logical.c:219 #, fuzzy msgid "malformed volume extent devices value" msgstr "잘못된 형식의 볼륨 확장 크기 값" #: src/storage/storage_backend_logical.c:248 msgid "malformed volume extent offset value" msgstr "잘못된 형식의 볼륨 확장 오프셋 값" #: src/storage/storage_backend_logical.c:454 msgid "failed to get source from sourceList" msgstr "sourceList에서 소스를 얻는 데 실패했습니다" #: src/storage/storage_backend_logical.c:525 #, c-format msgid "cannot open device '%s'" msgstr "장치 %s을 열 수 없음" #: src/storage/storage_backend_logical.c:531 #, c-format msgid "cannot clear device header of '%s'" msgstr "'%s'의 장치 헤더를 소거할 수 없음" #: src/storage/storage_backend_logical.c:538 #, fuzzy, c-format msgid "cannot flush header of device'%s'" msgstr "장치 '%s'을(를) 닫을 수 없음" #: src/storage/storage_backend_logical.c:545 #, c-format msgid "cannot close device '%s'" msgstr "장치 '%s'을(를) 닫을 수 없음" #: src/storage/storage_backend_logical.c:747 #, c-format msgid "cannot set file owner '%s'" msgstr "파일 소유자 '%s'를 설정할 수 없음" #: src/storage/storage_backend_logical.c:754 #, c-format msgid "cannot set file mode '%s'" msgstr "설정 모드 '%s'를 설정할 수 없음" #: src/storage/storage_backend_logical.c:770 #, c-format msgid "cannot find newly created volume '%s'" msgstr "새로 생성된 볼륨 '%s'를 찾을 수 없습니다" #: src/storage/storage_backend_mpath.c:232 #, fuzzy, c-format msgid "Failed to get %s minor number" msgstr "디스크 정보 보기 실패" #: src/storage/storage_backend_rbd.c:69 #, fuzzy msgid "failed to initialize RADOS" msgstr "TLS 클라이언트를 초기화할 수 없음: %s" #: src/storage/storage_backend_rbd.c:88 #, fuzzy msgid "failed to find the secret" msgstr "인터페이스 검색 실패" #: src/storage/storage_backend_rbd.c:99 #, fuzzy msgid "failed to decode the RADOS key" msgstr "SASL 데이터 %s 디코딩에 실패했습니다" #: src/storage/storage_backend_rbd.c:106 src/storage/storage_backend_rbd.c:115 #: src/storage/storage_backend_rbd.c:128 src/storage/storage_backend_rbd.c:162 #, fuzzy, c-format msgid "failed to set RADOS option: %s" msgstr "pid 읽기 실패: %s" #: src/storage/storage_backend_rbd.c:123 #, fuzzy msgid "failed to create the RADOS cluster" msgstr "'%s' 생성 실패" #: src/storage/storage_backend_rbd.c:149 msgid "received malformed monitor, check the XML definition" msgstr "" #: src/storage/storage_backend_rbd.c:170 #, fuzzy, c-format msgid "failed to connect to the RADOS monitor on: %s" msgstr "모니터 소켓 연결 실패" #: src/storage/storage_backend_rbd.c:218 src/storage/storage_backend_rbd.c:517 #, fuzzy, c-format msgid "failed to open the RBD image '%s'" msgstr "'%s' 파일 열기 실패" #: src/storage/storage_backend_rbd.c:226 #, fuzzy msgid "failed to stat the RBD image" msgstr "로그 파일 쓰기 실패" #: src/storage/storage_backend_rbd.c:281 src/storage/storage_backend_rbd.c:386 #: src/storage/storage_backend_rbd.c:427 src/storage/storage_backend_rbd.c:473 #: src/storage/storage_backend_rbd.c:510 #, fuzzy, c-format msgid "failed to create the RBD IoCTX. Does the pool '%s' exist?" msgstr "polkit 문맥 %s를 생성하는 데 실패했습니다" #: src/storage/storage_backend_rbd.c:289 #, fuzzy msgid "failed to stat the RADOS cluster" msgstr "보안 드라이버 시작 실패" #: src/storage/storage_backend_rbd.c:296 #, fuzzy, c-format msgid "failed to stat the RADOS pool '%s'" msgstr "풀 '%s'을 얻는 데 실패" #: src/storage/storage_backend_rbd.c:318 msgid "A problem occured while listing RBD images" msgstr "" #: src/storage/storage_backend_rbd.c:376 #, fuzzy msgid "This storage backend does not supported zeroed removal of volumes" msgstr "저장소 풀이 암호화된 볼륨을 지원하지 않음" #: src/storage/storage_backend_rbd.c:393 #, fuzzy, c-format msgid "failed to remove volume '%s/%s'" msgstr "풀 '%s'을 제거하는 데 실패" #: src/storage/storage_backend_rbd.c:440 #, fuzzy, c-format msgid "failed to create volume '%s/%s'" msgstr "파일 '%s'를 만드는 데 실패" #: src/storage/storage_backend_rbd.c:524 #, fuzzy, c-format msgid "failed to resize the RBD image '%s'" msgstr "'%s' 브리지를 켜는 데 실패" #: src/storage/storage_backend_scsi.c:66 #, c-format msgid "Could not find typefile '%s'" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/storage/storage_backend_scsi.c:78 #, c-format msgid "Could not read typefile '%s'" msgstr "타입파일 '%s'를 읽을 수 없음" #: src/storage/storage_backend_scsi.c:90 #, c-format msgid "Device type '%s' is not an integer" msgstr "장치 유형 '%s'가 정수가 아닙니다" #: src/storage/storage_backend_scsi.c:270 #, c-format msgid "Failed to update volume for '%s'" msgstr "'%s'에 대한 볼륨 업데이트 실패" #: src/storage/storage_backend_scsi.c:322 #: src/storage/storage_backend_scsi.c:411 #, c-format msgid "Failed to opendir sysfs path '%s'" msgstr "sysfs 경로 '%s'를 opendir하는 데 실패" #: src/storage/storage_backend_scsi.c:369 #, c-format msgid "Failed to parse block name %s" msgstr "블럭 이름 %s 구문 분석 실패" #: src/storage/storage_backend_scsi.c:457 #, c-format msgid "Failed to determine if %u:%u:%u:%u is a Direct-Access LUN" msgstr "%u:%u:%u:%u가 직접 억세스 LUN인지 결정하는 데 실패했습니다" #: src/storage/storage_backend_scsi.c:524 #: src/storage/storage_backend_scsi.c:566 #, c-format msgid "Failed to opendir path '%s'" msgstr "경로 '%s'를 opendir하는데 실패" #: src/storage/storage_backend_scsi.c:609 #, c-format msgid "Could not open '%s' to trigger host scan" msgstr "호스트 스캔을 시작하게 하려고 '%s'를 열 수 없습니다" #: src/storage/storage_backend_scsi.c:620 #, c-format msgid "Write to '%s' to trigger host scan failed" msgstr "호스트 스캔을 시작하게 하려고 '%s'를 쓰는 것에 실패했습니다" #: src/storage/storage_backend_sheepdog.c:163 #, fuzzy msgid "Sheepdog does not support encrypted volumes" msgstr "저장소 풀이 암호화된 볼륨을 지원하지 않음" #: src/storage/storage_driver.c:78 #, fuzzy, c-format msgid "Missing backend %d" msgstr "풀(pool) 타입 %d에 대해 백엔드가 빠짐" #: src/storage/storage_driver.c:86 #, fuzzy, c-format msgid "Failed to initialize storage pool '%s': %s" msgstr "VM '%s'의 autostart 실패: %s" #: src/storage/storage_driver.c:88 src/storage/storage_driver.c:101 #: src/storage/storage_driver.c:115 #, fuzzy msgid "no error message found" msgstr "오류 메세지 없음" #: src/storage/storage_driver.c:99 src/storage/storage_driver.c:113 #, fuzzy, c-format msgid "Failed to autostart storage pool '%s': %s" msgstr "VM '%s'의 autostart 실패: %s" #: src/storage/storage_driver.c:272 src/storage/storage_driver.c:1004 #: src/storage/storage_driver.c:1033 msgid "no pool with matching uuid" msgstr "uuid가 일치하는 풀이 없음" #: src/storage/storage_driver.c:297 #, c-format msgid "no pool with matching name '%s'" msgstr "이름이 '%s'와 일치하는 풀이 없음" #: src/storage/storage_driver.c:456 src/test/test_driver.c:4074 #, c-format msgid "pool type '%s' does not support source discovery" msgstr "풀 유형 '%s'는 소스 발견을 지원하지 않습니다" #: src/storage/storage_driver.c:624 src/storage/storage_driver.c:682 #: src/storage/storage_driver.c:728 src/storage/storage_driver.c:765 #: src/storage/storage_driver.c:825 src/storage/storage_driver.c:878 #: src/storage/storage_driver.c:934 src/storage/storage_driver.c:974 #: src/storage/storage_driver.c:1093 src/storage/storage_driver.c:1126 #: src/storage/storage_driver.c:1171 src/storage/storage_driver.c:1304 #: src/storage/storage_driver.c:1433 src/storage/storage_driver.c:1592 #: src/storage/storage_driver.c:1654 src/storage/storage_driver.c:1717 #: src/storage/storage_driver.c:2011 src/storage/storage_driver.c:2075 #: src/storage/storage_driver.c:2156 src/storage/storage_driver.c:2212 #: src/storage/storage_driver.c:2259 msgid "no storage pool with matching uuid" msgstr "uuid가 일치하는 저장소 풀이 없습니다" #: src/storage/storage_driver.c:630 msgid "pool is still active" msgstr "풀이 아직 동작중입니다" #: src/storage/storage_driver.c:636 src/storage/storage_driver.c:780 #: src/storage/storage_driver.c:840 src/storage/storage_driver.c:893 #, c-format msgid "pool '%s' has asynchronous jobs running." msgstr "풀 '%s'에 실행중인 동기화되지 않은 작업이 있습니다." #: src/storage/storage_driver.c:646 #, fuzzy, c-format msgid "Failed to delete autostart link '%s': %s" msgstr "VM '%s'의 autostart 실패: %s" #: src/storage/storage_driver.c:691 msgid "pool already active" msgstr "풀이 이미 동작 중" #: src/storage/storage_driver.c:737 msgid "storage pool is already active" msgstr "저장소 풀이 이미 동작중입니다" #: src/storage/storage_driver.c:774 src/storage/storage_driver.c:887 #: src/storage/storage_driver.c:1099 src/storage/storage_driver.c:1132 #: src/storage/storage_driver.c:1177 src/storage/storage_driver.c:1310 #: src/storage/storage_driver.c:1446 src/storage/storage_driver.c:1452 #: src/storage/storage_driver.c:1598 src/storage/storage_driver.c:1660 #: src/storage/storage_driver.c:1723 src/storage/storage_driver.c:2017 #: src/storage/storage_driver.c:2081 src/storage/storage_driver.c:2162 #: src/storage/storage_driver.c:2218 src/storage/storage_driver.c:2265 msgid "storage pool is not active" msgstr "저장소 풀이 동작중이 아닙니다" #: src/storage/storage_driver.c:834 msgid "storage pool is still active" msgstr "저장소 풀이 아직 사용중입니다" #: src/storage/storage_driver.c:847 msgid "pool does not support pool deletion" msgstr "풀이 풀 삭제를 지원하지 않습니다" #: src/storage/storage_driver.c:1225 msgid "no storage vol with matching key" msgstr "키가 일치하는 저장소 볼륨이 없습니다" #: src/storage/storage_driver.c:1276 msgid "no storage vol with matching path" msgstr "경로가 일치하는 저장소 볼륨이 없습니다" #: src/storage/storage_driver.c:1335 msgid "storage pool does not support volume creation" msgstr "저장소 풀이 볼륨 생성을 지원하지 않습니다" #: src/storage/storage_driver.c:1439 #, c-format msgid "no storage pool with matching name '%s'" msgstr "이름이 '%s'와 일치하는 저장소 풀이 없음" #: src/storage/storage_driver.c:1473 #, c-format msgid "storage volume name '%s' already in use." msgstr "저장소 볼륨 이름 '%s'가 이미 사용중입니다." #: src/storage/storage_driver.c:1489 msgid "storage pool does not support volume creation from an existing volume" msgstr "저장소 풀이 기존 볼륨에서 새 볼륨을 만드는 것을 지원하지 않습니다" #: src/storage/storage_driver.c:1495 src/storage/storage_driver.c:1613 #: src/storage/storage_driver.c:1675 src/storage/storage_driver.c:1741 #: src/storage/storage_driver.c:2032 src/storage/storage_driver.c:2099 #, c-format msgid "volume '%s' is still being allocated." msgstr "볼륨 '%s'의 할당이 아직도 진행중입니다." #: src/storage/storage_driver.c:1755 msgid "can't shrink capacity below existing allocation" msgstr "" #: src/storage/storage_driver.c:1762 #, fuzzy msgid "Not enough space left on storage pool" msgstr "저장 풀(pool)에 대한 알려져 있지 않은 루트 요소" #: src/storage/storage_driver.c:1768 #, fuzzy msgid "storage pool does not support changing of volume capacity" msgstr "저장소 풀이 볼륨 생성을 지원하지 않습니다" #: src/storage/storage_driver.c:1810 #, c-format msgid "Failed to truncate volume with path '%s' to 0 bytes" msgstr "경로 '%s'인 볼륨을 0 바이트로 줄이는 데 실패했습니다" #: src/storage/storage_driver.c:1819 #, fuzzy, c-format msgid "Failed to truncate volume with path '%s' to %ju bytes" msgstr "경로 '%s'인 볼륨을 %ju 바이트로 줄이는 데 실패했습니다\n" #: src/storage/storage_driver.c:1847 #, c-format msgid "Failed to seek to position %ju in volume with path '%s'" msgstr "%ju 위치로 이동하는 데 실패했습니다(볼륨 경로 '%s')" #: src/storage/storage_driver.c:1860 #, c-format msgid "Failed to write %zu bytes to storage volume with path '%s'" msgstr "%zu 바이트를 저장소 볼륨(경로 '%s')에 쓰는 데 실패했습니다" #: src/storage/storage_driver.c:1874 #, fuzzy, c-format msgid "cannot sync data to volume with path '%s'" msgstr "데이터를 파일 '%s'에 동기화할 수 없음" #: src/storage/storage_driver.c:1905 #, c-format msgid "Failed to open storage volume with path '%s'" msgstr "경로가 '%s'인 저장소 볼륨을 여는 데 실패했습니다" #: src/storage/storage_driver.c:1912 #, c-format msgid "Failed to stat storage volume with path '%s'" msgstr "경로가 '%s'인 저장소 볼륨의 상태를 읽어오는 데 실패했습니다" #: src/storage/storage_driver.c:1946 #, fuzzy, c-format msgid "unsupported algorithm %d" msgstr "지원되지 않는 네트워크 유형 %d" #: src/storage/storage_driver.c:2000 #, fuzzy, c-format msgid "wiping algorithm %d not supported" msgstr "네트워크 유형 %d를 지원하지 않습니다" #: src/storage/storage_driver.c:2106 msgid "storage pool does not support vol deletion" msgstr "저장소 풀이 저장소 볼륨 삭제를 지원하지 않습니다" #: src/test/test_driver.c:350 #, c-format msgid "Exceeded max iface limit %d" msgstr "iface 한계 %d를 넘어감" #: src/test/test_driver.c:696 msgid "resolving volume filename" msgstr "볼륨 파일 이름 찾는 중" #: src/test/test_driver.c:789 msgid "Root element is not 'node'" msgstr "루트 요소가 'node'가 아닙니다" #: src/test/test_driver.c:807 #, fuzzy msgid "invalid node cpu nodes value" msgstr "%s에 있는 잘못된 인수" #: src/test/test_driver.c:816 #, fuzzy msgid "invalid node cpu sockets value" msgstr "노드 cpu 소켓" #: src/test/test_driver.c:825 #, fuzzy msgid "invalid node cpu cores value" msgstr "%s에 있는 잘못된 인수" #: src/test/test_driver.c:834 #, fuzzy msgid "invalid node cpu threads value" msgstr "노드 cpu 스레드" #: src/test/test_driver.c:846 #, fuzzy msgid "invalid node cpu active value" msgstr "%s에 있는 잘못된 인수" #: src/test/test_driver.c:854 #, fuzzy msgid "invalid node cpu mhz value" msgstr "%s에 있는 잘못된 인수" #: src/test/test_driver.c:862 src/xenxs/xen_xm.c:711 #, c-format msgid "Model %s too big for destination" msgstr "모델 %s가 목적지로는 너무 큼" #: src/test/test_driver.c:874 #, fuzzy msgid "invalid node memory value" msgstr "%s에 있는 잘못된 인수" #: src/test/test_driver.c:891 msgid "resolving domain filename" msgstr "도메인 파일명 해결 중" #: src/test/test_driver.c:936 msgid "resolving network filename" msgstr "네트워크 파일명 해결 중" #: src/test/test_driver.c:972 msgid "resolving interface filename" msgstr "인터페이스 파일 이름 찾는 중" #: src/test/test_driver.c:1009 msgid "resolving pool filename" msgstr "풀 파일 이름 찾는 중" #: src/test/test_driver.c:1061 msgid "resolving device filename" msgstr "장치 파일명 해결 중" #: src/test/test_driver.c:1132 msgid "testOpen: supply a path or use test:///default" msgstr "testOpen: 경로를 지정하거나 test:///default 사용" #: src/test/test_driver.c:1486 #, c-format msgid "domain '%s' not paused" msgstr "도메인이 '%s'가 일시중지되지 않았습니다" #: src/test/test_driver.c:1529 src/test/test_driver.c:1573 #, c-format msgid "domain '%s' not running" msgstr "도메인 '%s'가 실행중이 아님" #: src/test/test_driver.c:1694 src/test/test_driver.c:2286 #: src/test/test_driver.c:2811 src/test/test_driver.c:2866 msgid "getting time of day" msgstr "시간 읽어오는 중" #: src/test/test_driver.c:1777 #, c-format msgid "saving domain '%s' failed to allocate space for metadata" msgstr "" "도메인 '%s'를 저장하는 중 메타데이터에 대한 공간을 할당하는 데 실패했습니다" #: src/test/test_driver.c:1784 #, c-format msgid "saving domain '%s' to '%s': open failed" msgstr "도메인 '%s'를 '%s'에 저장: 열기가 실패했습니다" #: src/test/test_driver.c:1791 src/test/test_driver.c:1797 #: src/test/test_driver.c:1803 src/test/test_driver.c:1810 #, c-format msgid "saving domain '%s' to '%s': write failed" msgstr "도메인 '%s'를 '%s'에 저장: 쓰기가 실패했습니다" #: src/test/test_driver.c:1880 #, c-format msgid "cannot read domain image '%s'" msgstr "도메인 이미지 '%s'를 읽을 수 없음" #: src/test/test_driver.c:1886 #, c-format msgid "incomplete save header in '%s'" msgstr " '%s' 내의 불완전한 응답 헤더" #: src/test/test_driver.c:1892 msgid "mismatched header magic" msgstr "일치하지 않는 헤더 매직" #: src/test/test_driver.c:1897 #, c-format msgid "failed to read metadata length in '%s'" msgstr "'%s'에서 메타데이터 길이를 읽는 데 실패" #: src/test/test_driver.c:1903 msgid "length of metadata out of range" msgstr "메타데이터 길이가 범위를 벗어남" #: src/test/test_driver.c:1912 #, c-format msgid "incomplete metdata in '%s'" msgstr "'%s'안에 완전하지 않은 메타데이터" #: src/test/test_driver.c:1983 #, c-format msgid "domain '%s' coredump: failed to open %s" msgstr "도메인 '%s' 코어덤프: %s를 여는 데 실패" #: src/test/test_driver.c:1989 #, c-format msgid "domain '%s' coredump: failed to write header to %s" msgstr "도메인 '%s' 코어덤프: 헤더를 %s에 쓰는 데 실패" #: src/test/test_driver.c:1995 #, c-format msgid "domain '%s' coredump: write failed: %s" msgstr "도메인 '%s' 코어덤프: 쓰기 실패: %s" #: src/test/test_driver.c:2195 msgid "cannot hotplug vcpus for an inactive domain" msgstr "실행중이 아닌된 도메인의 vcpu를 핫플러그 할 수 없음" #: src/test/test_driver.c:2207 #, fuzzy, c-format msgid "requested cpu amount exceeds maximum (%d > %d)" msgstr "vCPU 갯수가 최대 갯수를 초과: %d > %d" #: src/test/test_driver.c:2278 msgid "cannot list vcpus for an inactive domain" msgstr "실행중이 아닌 도메인의 vcpu 목록을 얻을 수 없음" #: src/test/test_driver.c:2370 msgid "requested vcpu is higher than allocated vcpus" msgstr "요청한 vcpu 갯수가 할당된 vcpu 갯수보다 더 큽니다" #: src/test/test_driver.c:2511 msgid "Range exceeds available cells" msgstr "사용 가능한 셀의 갯수를 벗어나는 범위입니다" #: src/test/test_driver.c:2547 #, c-format msgid "Domain '%s' is already running" msgstr "도메인이 '%s'가 이미 실행중입니다" #: src/test/test_driver.c:3152 #, c-format msgid "Network '%s' is still running" msgstr "네트워크 '%s'가 여전히 실행중입니다" #: src/test/test_driver.c:3185 #, c-format msgid "Network '%s' is already running" msgstr "도메인 '%s'가 이미 실행중입니다" #: src/test/test_driver.c:3540 msgid "there is another transaction running." msgstr "" #: src/test/test_driver.c:3568 msgid "no transaction running, nothing to be committed." msgstr "" #: src/test/test_driver.c:3596 msgid "no transaction running, nothing to rollback." msgstr "" #: src/test/test_driver.c:4104 msgid "storage pool already exists" msgstr "저장소 풀이 이미 존재합니다" #: src/uml/uml_conf.c:193 #, fuzzy msgid "IP address not supported for ethernet interface" msgstr "이더넷 인터페이스에 대해 IP주소가 지원되지 않습니다" #: src/uml/uml_conf.c:200 msgid "TCP server networking type not supported" msgstr "지원되지 않는 TCP 서버 네트워킹 유형" #: src/uml/uml_conf.c:205 msgid "TCP client networking type not supported" msgstr "지원되지 않는 TCP 클라이언트 네트워킹 유형" #: src/uml/uml_conf.c:220 #, c-format msgid "Network '%s' not found" msgstr "네트워크 '%s'를 찾을 수 없음" #: src/uml/uml_conf.c:251 msgid "internal networking type not supported" msgstr "내부 네트워킹 유형을 지원하지 않음" #: src/uml/uml_conf.c:256 #, fuzzy msgid "direct networking type not supported" msgstr "지원되지 않는 TCP 클라이언트 네트워킹 유형" #: src/uml/uml_conf.c:261 #, fuzzy msgid "hostdev networking type not supported" msgstr "지원되지 않는 TCP 클라이언트 네트워킹 유형" #: src/uml/uml_conf.c:270 #, fuzzy msgid "interface script execution not supported by this driver" msgstr "이더넷 인터페이스에 대해 스크립트 실행이 지원되지 않습니다" #: src/uml/uml_conf.c:336 msgid "only TCP listen is supported for chr device" msgstr "문자 장치에 대해 TCP listen만을 지원" #: src/uml/uml_conf.c:354 #, fuzzy, c-format msgid "failed to open chardev file: %s" msgstr "'%s' 파일 열기 실패" #: src/uml/uml_conf.c:375 #, c-format msgid "unsupported chr device type %d" msgstr "지원하지 않는 문자 장치 유형 %d" #: src/uml/uml_driver.c:495 msgid "cannot initialize inotify" msgstr "inotify를 초기화할 수 없음" #: src/uml/uml_driver.c:501 #, c-format msgid "Failed to create monitor directory %s: %s" msgstr "%s 모니터 디렉터리 연결 실패: %s" #: src/uml/uml_driver.c:539 msgid "umlStartup: out of memory" msgstr "umlStartup: 메모리가 부족" #: src/uml/uml_driver.c:800 #, c-format msgid "failed to read pid: %s" msgstr "pid 읽기 실패: %s" #: src/uml/uml_driver.c:822 #, c-format msgid "Unix path %s too long for destination" msgstr "유닉스 경로 %s가 목적지에 대해 너무 긺" #: src/uml/uml_driver.c:852 msgid "cannot open socket" msgstr "소켓을 열수 없음" #: src/uml/uml_driver.c:862 msgid "cannot bind socket" msgstr "소켓을 바인드할 수 없음" #: src/uml/uml_driver.c:916 #, c-format msgid "cannot send too long command %s (%d bytes)" msgstr "%s 명령어가 너무 길어서 보낼 수 없습니다 (%d 바이트)" #: src/uml/uml_driver.c:922 #, c-format msgid "Command %s too long for destination" msgstr "명령 %s가 목적지에 대해 너무 긺" #: src/uml/uml_driver.c:929 #, c-format msgid "cannot send command %s" msgstr "명령 '%s'를 보낼 수 없음" #: src/uml/uml_driver.c:942 #, c-format msgid "cannot read reply %s" msgstr "응답 %s를 읽을 수 없음" #: src/uml/uml_driver.c:948 #, c-format msgid "incomplete reply %s" msgstr "완전하지 않은 응답 %s" #: src/uml/uml_driver.c:1013 msgid "no kernel specified" msgstr "커널이 지정되지 않았습니다" #: src/uml/uml_driver.c:1022 #, c-format msgid "Cannot find UML kernel %s" msgstr "UML 커널 %s를 찾을 수 없음" #: src/uml/uml_driver.c:1052 msgid "Unable to set VM logfile close-on-exec flag" msgstr "VM 로그파일의 close-on-exec 플래그를 설정할 수 없음" #: src/uml/uml_driver.c:1188 #, c-format msgid "unexpected UML URI path '%s', try uml:///system" msgstr "예기치 못한 UML URI 경로 '%s', uml:///system을 시도하십시오" #: src/uml/uml_driver.c:1195 #, c-format msgid "unexpected UML URI path '%s', try uml:///session" msgstr "예기치 못한 UML URI 경로 '%s', uml:///session을 시도" #: src/uml/uml_driver.c:1204 msgid "uml state driver is not active" msgstr "uml 상태 드라이버가 작동중이 아닙니다" #: src/uml/uml_driver.c:1454 #, c-format msgid "cannot parse version %s" msgstr "버전 번호 %s를 구문 분석할 수 없음" #: src/uml/uml_driver.c:1560 msgid "shutdown operation failed" msgstr "시스템 종료 동작이 실패했습니다" #: src/uml/uml_driver.c:1697 msgid "cannot set max memory lower than current memory" msgstr "최대 메모리를 현재 메모리보다 적게 설정할 수 없음" #: src/uml/uml_driver.c:1730 msgid "cannot set memory of an active domain" msgstr "동작중인 도메인의 메모리를 설정할 수 없음" #: src/uml/uml_driver.c:2073 msgid "cannot attach device on inactive domain" msgstr "비실행중인 도메인에 장치를 부착할 수 없음" #: src/uml/uml_driver.c:2119 src/uml/uml_driver.c:2231 #: src/vbox/vbox_tmpl.c:5582 src/vbox/vbox_tmpl.c:5597 #: src/vbox/vbox_tmpl.c:5753 msgid "cannot modify the persistent configuration of a domain" msgstr "도메인의 영구 설정을 변경할 수 없음" #: src/uml/uml_driver.c:2191 msgid "cannot detach device on inactive domain" msgstr "작동중이 아닌 도메인에서 장치를 탈착할 수 없음" #: src/uml/uml_driver.c:2384 tools/virsh-volume.c:570 #, c-format msgid "cannot read %s" msgstr "%s를 읽을 수 없음" #: src/util/cgroup.c:125 #, fuzzy msgid "Unable to open /proc/mounts" msgstr "/proc/mounts를 읽는 데 실패" #: src/util/cgroup.c:182 #, fuzzy msgid "Unable to open /proc/self/cgroup" msgstr "%s를 열 수 없음" #: src/util/cgroup.c:241 #, fuzzy, c-format msgid "Failed to detect mounts for %s" msgstr "%s에 대한 모니터연결 실패" #: src/util/cgroup.c:263 #, fuzzy, c-format msgid "Could not find placement for controller %s at %s" msgstr "'%s'에 대한 부모 HBA를 찾을 수 없습니다" #: src/util/cgroup.c:276 #, fuzzy, c-format msgid "Failed to detect mapping for %s" msgstr "%s에서 도메인 정의하기 실패" #: src/util/cgroup.c:478 #, fuzzy, c-format msgid "Failed to get %s %d" msgstr "%s를 %s로 설정하는 데 실패" #: src/util/cgroup.c:491 #, fuzzy, c-format msgid "Failed to set %s %d" msgstr "%s를 %s로 설정하는 데 실패" #: src/util/cgroup.c:509 #, fuzzy, c-format msgid "Failed to read %s/%s (%d)" msgstr "'%s' 읽기 실패" #: src/util/cgroup.c:523 #, fuzzy, c-format msgid "Failed to set %s/%s (%d)" msgstr "%s를 %s로 설정하는 데 실패" #: src/util/cgroup.c:698 #, fuzzy, c-format msgid "Unable to open %s (%d)" msgstr "%s를 열 수 없음" #: src/util/cgroup.c:709 #, fuzzy, c-format msgid "Failed to readdir for %s (%d)" msgstr "'%s'에서 읽기 실패: %s " #: src/util/cgroup.c:730 #, fuzzy, c-format msgid "Unable to remove %s (%d)" msgstr "%s를 열 수 없음" #: src/util/cgroup.c:908 #, fuzzy, c-format msgid "Cannot recover cgroup %s from %s" msgstr "%s에 대한 설정을 제거할 수 없음" #: src/util/command.c:173 #, fuzzy, c-format msgid "cannot clear process capabilities %d" msgstr "호스트 CPU 기능을 얻는 데 실패했습니다" #: src/util/command.c:200 #, fuzzy, c-format msgid "cannot apply process capabilities %d" msgstr "호스트 CPU 기능을 얻는 데 실패했습니다" #: src/util/command.c:254 msgid "cannot block signals" msgstr "시그널을 블럭할 수 없음" #: src/util/command.c:273 src/util/command.c:580 msgid "cannot fork child process" msgstr "자식 프로세스를 fork할 수 없음" #: src/util/command.c:285 src/util/command.c:330 msgid "cannot unblock signals" msgstr "블럭된 시그널을 해제할 수 없음" #: src/util/command.c:417 #, fuzzy, c-format msgid "Cannot find '%s' in path" msgstr "세션을 찾을 수 없음" #: src/util/command.c:435 msgid "cannot create pipe" msgstr "파이프를 생성할 수 없음" #: src/util/command.c:442 src/util/command.c:469 msgid "Failed to set non-blocking file descriptor flag" msgstr "비-블러킹 파일 디스크립터 플래그를 설정하는 데 실패했습니다" #: src/util/command.c:462 msgid "Failed to create pipe" msgstr "파이프 생성에 실패" #: src/util/command.c:529 #, fuzzy, c-format msgid "failed to preserve fd %d" msgstr "%s를 열 수 없음" #: src/util/command.c:536 msgid "failed to setup stdin file handle" msgstr "표준 입력 파일 핸들을 설정하는 데 실패했습니다" #: src/util/command.c:541 msgid "failed to setup stdout file handle" msgstr "표준 출력 핸들을 설정하는 데 실패했습니다" #: src/util/command.c:546 msgid "failed to setup stderr file handle" msgstr "표준 오류 파일 핸들을 설정하는 데 실패했습니다" #: src/util/command.c:567 msgid "cannot become session leader" msgstr "세션 리더가 되는 데 실패" #: src/util/command.c:573 #, fuzzy msgid "cannot change to root directory" msgstr "루트 디렉터리로 cd하기 실패: %s" #: src/util/command.c:590 #, c-format msgid "could not write pidfile %s for %d" msgstr "pidfile %s(%d에 대한)에 쓸 수 없음" #: src/util/command.c:611 #, fuzzy msgid "Could not disable SIGPIPE" msgstr "UUID를 설정할 수 없음" #: src/util/command.c:622 #, fuzzy msgid "Could not re-enable SIGPIPE" msgstr "veth 이름을 생성할 수 없음" #: src/util/command.c:642 #, c-format msgid "cannot execute binary %s" msgstr "바이너리 %s를 실행할 수 없음" #: src/util/command.c:703 #, fuzzy msgid "virRun is not implemented for WIN32" msgstr "%s은 Win32상에서 구현되지 않음" #: src/util/command.c:727 #, fuzzy msgid "virExec is not implemented for WIN32" msgstr "%s은 Win32상에서 구현되지 않음" #: src/util/command.c:1637 src/util/command.c:1865 src/util/command.c:1914 #: src/util/command.c:2155 src/util/command.c:2303 src/util/command.c:2498 #: src/util/command.c:2565 #, fuzzy msgid "invalid use of command API" msgstr "명령 이름" #: src/util/command.c:1674 #, c-format msgid "exit status %d" msgstr "" #: src/util/command.c:1677 #, c-format msgid "fatal signal %d" msgstr "" #: src/util/command.c:1680 #, fuzzy, c-format msgid "invalid value %d" msgstr "잘못된 캡 값" #: src/util/command.c:1757 #, fuzzy msgid "unable to poll on child" msgstr "%s를 열 수 없음" #: src/util/command.c:1784 #, fuzzy msgid "unable to read child stdout" msgstr "파이프에 수 없음" #: src/util/command.c:1785 #, fuzzy msgid "unable to read child stderr" msgstr "파이프에 수 없음" #: src/util/command.c:1821 #, fuzzy msgid "unable to write to child input" msgstr "파이프에 수 없음" #: src/util/command.c:1879 #, fuzzy msgid "Executing new processes is not supported on Win32 platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/util/command.c:1936 #, fuzzy msgid "cannot mix caller fds with blocking execution" msgstr "연결 없으 비밀 정보를 찾을 수 없습니다" #: src/util/command.c:1942 #, fuzzy msgid "cannot mix string I/O with daemon" msgstr "%s 설정 파일 쓰기 실패" #: src/util/command.c:1952 #, fuzzy msgid "unable to open pipe" msgstr "파이프를 만들 수 없음" #: src/util/command.c:2063 #, fuzzy, c-format msgid "Unable to change to %s" msgstr "루트 디렉터리로 cd하기 실패" #: src/util/command.c:2073 #, fuzzy msgid "Unable to notify parent process" msgstr "/proc/mounts를 읽는 데 실패" #: src/util/command.c:2083 msgid "Unknown failure during hook execution" msgstr "" #: src/util/command.c:2087 #, fuzzy msgid "Unable to send error to parent" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: src/util/command.c:2099 #, fuzzy msgid "Unable to wait on parent process" msgstr "'%s'를 읽는 프로세스를 wait하는 것에 실패" #: src/util/command.c:2102 msgid "libvirtd quit during handshake" msgstr "" #: src/util/command.c:2107 #, fuzzy, c-format msgid "Unexpected confirm code '%c' from parent" msgstr "예기치 못한 hostdev 모드 %d" #: src/util/command.c:2167 msgid "cannot mix string I/O with asynchronous command" msgstr "" #: src/util/command.c:2173 #, fuzzy, c-format msgid "command is already running as pid %lld" msgstr "도메인이 이미 실행중입니다" #: src/util/command.c:2180 #, fuzzy msgid "daemonized command cannot use virCommandRunAsync" msgstr "작업 디렉터리를 얻을 수 없음" #: src/util/command.c:2185 #, fuzzy, c-format msgid "daemonized command cannot set working directory %s" msgstr "작업 디렉터리를 얻을 수 없음" #: src/util/command.c:2191 msgid "creation of pid file requires daemonized command" msgstr "" #: src/util/command.c:2249 src/util/command.c:2259 #, fuzzy, c-format msgid "unable to wait for process %lld" msgstr "'%s'를 읽는 프로세스를 wait하는 것에 실패" #: src/util/command.c:2268 #, fuzzy, c-format msgid "Child process (%lld) unexpected %s" msgstr "중간 데몬 프로세스가 상태 %d를 반환하며 종료했습니다." #: src/util/command.c:2309 #, fuzzy msgid "command is not yet running" msgstr "도메인이 실행중이 아님" #: src/util/command.c:2329 #, fuzzy, c-format msgid "Child process (%s) unexpected %s%s%s" msgstr "중간 데몬 프로세스가 상태 %d를 반환하며 종료했습니다." #: src/util/command.c:2504 src/util/command.c:2571 #, fuzzy msgid "Handshake is already complete" msgstr "이미 도메인이 활성화됨" #: src/util/command.c:2512 #, fuzzy msgid "Unable to wait for child process" msgstr "'%s'를 읽는 프로세스를 wait하는 것에 실패" #: src/util/command.c:2515 msgid "Child quit during startup handshake" msgstr "" #: src/util/command.c:2536 #, fuzzy msgid "No error message from child failure" msgstr "오류 메세지 없음" #: src/util/command.c:2577 #, fuzzy msgid "Unable to notify child process" msgstr "자식 프로세스를 fork할 수 없음" #: src/util/conf.c:117 #, fuzzy, c-format msgid "%s:%d: %s" msgstr "cd: %s: %s" #: src/util/conf.c:363 msgid "unterminated number" msgstr "종료되지 않은 숫자" #: src/util/conf.c:396 src/util/conf.c:420 src/util/conf.c:435 msgid "unterminated string" msgstr "종료되지 않은 문자열" #: src/util/conf.c:466 src/util/conf.c:536 msgid "expecting a value" msgstr "값 예상하기" #: src/util/conf.c:477 msgid "lists not allowed in VMX format" msgstr "VMX 형식의 목록은 허용되지 않습니다" #: src/util/conf.c:498 msgid "expecting a separator in list" msgstr "목록에 있는 분리자 예상하기" #: src/util/conf.c:521 msgid "list is not closed with ]" msgstr "목록이 ]로 종료되지 않음 " #: src/util/conf.c:528 msgid "numbers not allowed in VMX format" msgstr "VMX 형식에서 숫자는 허용되지 않습니다" #: src/util/conf.c:571 msgid "expecting a name" msgstr "이름 예상하기" #: src/util/conf.c:635 msgid "expecting a separator" msgstr "분리자 예상하기" #: src/util/conf.c:666 msgid "expecting an assignment" msgstr "할당 예상하기" #: src/util/conf.c:964 msgid "failed to open file" msgstr "파일 열기 실패" #: src/util/conf.c:974 msgid "failed to save content" msgstr "내용 저장 실패" #: src/util/dnsmasq.c:251 src/util/dnsmasq.c:417 #, c-format msgid "cannot write config file '%s'" msgstr "설정 파일 쓰기 실패: %s" #: src/util/dnsmasq.c:576 #, c-format msgid "Failed to make dnsmasq (PID: %d) reload config files." msgstr "" #: src/util/event_poll.c:622 #, fuzzy msgid "Unable to poll on file handles" msgstr "설정 파일 핸들을 저장하는 데 실패했습니다." #: src/util/event_poll.c:672 #, fuzzy msgid "Unable to setup wakeup pipe" msgstr "파이프를 만들 수 없음" #: src/util/event_poll.c:680 #, fuzzy, c-format msgid "Unable to add handle %d to event loop" msgstr "연결 해시 테이블에 비밀 추가 실패" #: src/util/hooks.c:105 #, fuzzy, c-format msgid "Invalid hook name for #%d" msgstr "잘못된 포트 번호: %s" #: src/util/hooks.c:112 src/util/hooks.c:265 #, fuzzy, c-format msgid "Failed to build path for %s hook" msgstr "풀 %s를 만드는 데 실패" #: src/util/hooks.c:252 #, c-format msgid "Hook for %s, failed to find operation #%d" msgstr "" #: src/util/hooks.c:285 #, c-format msgid "Hook script %s %s failed with error code %d" msgstr "" #: src/util/hostusb.c:88 #, c-format msgid "Could not parse usb file %s" msgstr "usb 파일 %s를 구문분석 할 수 없음" #: src/util/hostusb.c:119 #, c-format msgid "Could not open directory %s" msgstr "디렉터리 %s를 열 수 없음" #: src/util/hostusb.c:144 #, c-format msgid "Failed to parse dir name '%s'" msgstr "디렉터리 이름 '%s'를 구문분숙 하는 데 실패" #: src/util/hostusb.c:200 #, c-format msgid "Did not find USB device %x:%x" msgstr "USB 장치 %x:%x를 찾을 수 없음" #: src/util/hostusb.c:220 #, fuzzy, c-format msgid "Did not find USB device bus:%u device:%u" msgstr "USB 장치 %x:%x를 찾을 수 없음" #: src/util/hostusb.c:248 #, fuzzy, c-format msgid "Did not find USB device %x:%x bus:%u device:%u" msgstr "USB 장치 %x:%x를 찾을 수 없음" #: src/util/hostusb.c:278 #, c-format msgid "dev->name buffer overflow: %.3o:%.3o" msgstr "" #: src/util/hostusb.c:294 #, c-format msgid "dev->id buffer overflow: %d %d" msgstr "" #: src/util/hostusb.c:383 src/util/pci.c:1525 #, c-format msgid "Device %s is already in use" msgstr "장치 %s가 이미 사용중입니다" #: src/util/iohelper.c:115 msgid "O_DIRECT read needs entire seekable file" msgstr "" #: src/util/iohelper.c:128 msgid "O_DIRECT write needs empty seekable file" msgstr "" #: src/util/iohelper.c:136 #, fuzzy, c-format msgid "Unable to process file with flags %d" msgstr "설정 파일 핸들을 저장하는 데 실패했습니다." #: src/util/iohelper.c:161 msgid "Too many short reads for O_DIRECT" msgstr "" #: src/util/iohelper.c:173 #, fuzzy, c-format msgid "Unable to write %s" msgstr "%s를 열 수 없음" #: src/util/iohelper.c:177 #, fuzzy, c-format msgid "Unable to truncate %s" msgstr "%s를 열 수 없음" #: src/util/iohelper.c:187 #, fuzzy, c-format msgid "Unable to close %s" msgstr "%s를 열 수 없음" #: src/util/iohelper.c:201 #, c-format msgid "%s: try --help for more details" msgstr "" #: src/util/iohelper.c:203 #, c-format msgid "" "Usage: %s FILENAME OFLAGS MODE OFFSET LENGTH DELETE\n" " or: %s FILENAME LENGTH FD\n" msgstr "" #: src/util/iohelper.c:245 #, fuzzy, c-format msgid "%s: malformed file flags %s" msgstr "잘못된 형식의 크기 %s" #: src/util/iohelper.c:250 #, fuzzy, c-format msgid "%s: malformed file mode %s" msgstr "잘못된 형식의 8진 모드" #: src/util/iohelper.c:255 #, fuzzy, c-format msgid "%s: malformed file offset %s" msgstr "잘못된 형식의 볼륨 확장 오프셋 값" #: src/util/iohelper.c:260 #, fuzzy, c-format msgid "%s: malformed delete flag %s" msgstr "잘못된 형식의 크기 %s" #: src/util/iohelper.c:268 #, fuzzy, c-format msgid "%s: malformed fd %s" msgstr "잘못된 형식의 8진 모드" #: src/util/iohelper.c:282 #, fuzzy, c-format msgid "%s: unable to determine access mode of fd %d" msgstr "도메인 %s에 대한 장치를 거부할 수 없음" #: src/util/iohelper.c:291 #, fuzzy, c-format msgid "%s: malformed file length %s" msgstr "'%s'에 대해 잘못된 형식의 uuid 요소" #: src/util/iohelper.c:309 #, fuzzy, c-format msgid "%s: unknown failure with %s\n" msgstr "알려지지 않은 실패" #: src/util/iptables.c:337 #, fuzzy msgid "Only IPv4 or IPv6 addresses can be used with iptables" msgstr "bus=0인 PCI 장치 주소만 지원됩니다" #: src/util/iptables.c:343 #, fuzzy msgid "Failure to mask address" msgstr "소켓 주소를 얻는 데 실패" #: src/util/iptables.c:807 #, c-format msgid "Attempted to NAT '%s'. NAT is only supported for IPv4." msgstr "" #: src/util/json.c:957 #, fuzzy msgid "Unable to create JSON parser" msgstr "파이프를 생성할 수 없" #: src/util/json.c:969 #, c-format msgid "cannot parse json %s: %s" msgstr "json %s를 구문 분석할 수 없음: %s" #: src/util/json.c:1082 #, fuzzy msgid "Unable to create JSON formatter" msgstr "파이프를 생성할 수 없" #: src/util/json.c:1112 src/util/json.c:1119 msgid "No JSON parser implementation is available" msgstr "구현된 JSON 구문분석기가 없습니다" #: src/util/pci.c:615 #, c-format msgid "Active %s devices on bus with %s, not doing bus reset" msgstr "%s 활성화된 장치가 %s 버스에 있습니다. 버스를 리셋하지 않습니다" #: src/util/pci.c:625 src/util/pci.c:1713 #, c-format msgid "Failed to find parent device for %s" msgstr "%s의 부모 장치를 찾는 데 실패했습니다" #: src/util/pci.c:638 src/util/pci.c:684 #, c-format msgid "Failed to read PCI config space for %s" msgstr "%s에 대한 PIC 설정 공간을 읽는 데 실패했습니다" #: src/util/pci.c:658 src/util/pci.c:704 #, c-format msgid "Failed to restore PCI config space for %s" msgstr "%s에 대한 PCI 설정 공간을 복구하는 데 실패했습니다" #: src/util/pci.c:719 #, c-format msgid "Failed to open config space file '%s'" msgstr "설정 공간 파일 '%s' 열기 실패" #: src/util/pci.c:744 #, c-format msgid "Not resetting active device %s" msgstr "작동중인 장치 %s를 리셋하지 않음" #: src/util/pci.c:771 #, c-format msgid "Unable to reset PCI device %s: %s" msgstr "PCI 장치 %s를 리셋할 수 없음: %s" #: src/util/pci.c:773 msgid "no FLR, PM reset or bus reset available" msgstr "FLR, PM 또는 버스 리셋을 사용할 수 없습니다" #: src/util/pci.c:897 #, fuzzy, c-format msgid "Failed to unbind PCI device '%s' from %s" msgstr "PCI 장치 '%s'를 %s에 바인드하는 데 실패" #: src/util/pci.c:915 #, fuzzy, c-format msgid "Failed to remove slot for PCI device '%s' from %s" msgstr "PCI 장치 '%s'의 %s에 대한 슬롯을 제거하는 데 실패했습니다" #: src/util/pci.c:939 #, c-format msgid "Failed to trigger a re-probe for PCI device '%s'" msgstr "PCI 장치 '%s'를 다시 감지하도록 하는 데 실패했습니다" #: src/util/pci.c:997 #, c-format msgid "Failed to add PCI device ID '%s' to %s" msgstr "PCI 장치 ID '%s'를 %s에 부착하는 데 실패" #: src/util/pci.c:1028 #, c-format msgid "Failed to unbind PCI device '%s'" msgstr "'%s' PCI 장치를 바인드 해제하는 데 실패" #: src/util/pci.c:1050 #, c-format msgid "Failed to add slot for PCI device '%s' to %s" msgstr "PCI 장치 '%s'(%s에 대한)에 슬롯을 추가하는 데 실패" #: src/util/pci.c:1062 #, c-format msgid "Failed to bind PCI device '%s' to %s" msgstr "PCI 장치 '%s'를 %s에 바인드하는 데 실패" #: src/util/pci.c:1085 #, c-format msgid "Failed to remove PCI ID '%s' from %s" msgstr "PIC ID '%s'를 %s에서 제거하는 데 실패했습니다" #: src/util/pci.c:1118 src/util/pci.c:1148 msgid "cannot find any PCI stub module" msgstr "PIC 스텁 모듈을 찾을 수 없습니다" #: src/util/pci.c:1124 #, fuzzy, c-format msgid "Not detaching active device %s" msgstr "작동중인 장치 %s를 리셋하지 않음" #: src/util/pci.c:1154 #, fuzzy, c-format msgid "Not reattaching active device %s" msgstr "작동중인 장치 %s를 리셋하지 않음" #: src/util/pci.c:1356 #, c-format msgid "dev->name buffer overflow: %.4x:%.2x:%.2x.%.1x" msgstr "" #: src/util/pci.c:1368 #, c-format msgid "Device %s not found: could not access %s" msgstr "" #: src/util/pci.c:1378 #, c-format msgid "Failed to read product/vendor ID for %s" msgstr "%s의 벤더/생산자 ID를 읽는 데 실패했습니다" #: src/util/pci.c:1387 #, c-format msgid "dev->id buffer overflow: %s %s" msgstr "" #: src/util/pci.c:1768 #, c-format msgid "Device %s is behind a switch lacking ACS and cannot be assigned" msgstr "스위치 뒤의 %s 장치가 ACS가 없기 때문에, 할당될 수 없습니다" #: src/util/pci.c:1865 #, fuzzy, c-format msgid "Failed to resolve device link '%s': '%s'" msgstr "장치 %s의 리셋이 실패" #: src/util/pci.c:1879 #, fuzzy, c-format msgid "Failed to parse PCI config address '%s'" msgstr "mac 주소 '%s' 구문 분석할 수 없습니다" #: src/util/pci.c:1946 #, fuzzy, c-format msgid "Failed to open dir '%s': '%s'" msgstr "디렉터리 '%s'를 여는 데 실패" #: src/util/pci.c:1977 #, fuzzy, c-format msgid "Failed to get SR IOV function from device link '%s'" msgstr "'%s' PCI 장치를 바인드 해제하는 데 실패" #: src/util/pci.c:2039 #, c-format msgid "Error getting physical function's '%s' virtual_functions" msgstr "" #: src/util/pci.c:2169 src/util/virnetlink.c:737 #, fuzzy msgid "not supported on non-linux platforms" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/util/processinfo.c:75 src/util/processinfo.c:91 #, c-format msgid "cannot set CPU affinity on process %d" msgstr "프로세스 %d의 CPU 친화도를 지정할 수 없습니다." #: src/util/processinfo.c:136 src/util/processinfo.c:151 #, c-format msgid "cannot get CPU affinity of process %d" msgstr "프로세스 %d의 CPU 진화도를 얻을 수 없음" #: src/util/processinfo.c:171 src/util/processinfo.c:181 msgid "Process CPU affinity is not supported on this platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/util/sexpr.c:242 #, fuzzy, c-format msgid "unknown s-expression kind %d" msgstr "알려지지 않은 비디오 모델: '%s' " #: src/util/stats_linux.c:62 msgid "Could not open /proc/net/dev" msgstr "/proc/net/dev를 열 수 없습니다" #: src/util/stats_linux.c:118 src/xen/xen_hypervisor.c:1519 #, fuzzy msgid "/proc/net/dev: Interface not found" msgstr "인터페이스를 찾을 수 없음" #: src/util/storage_file.c:762 #, fuzzy, c-format msgid "cannot set to start of '%s'" msgstr "파일 '%s'를 stat할 수 없음" #: src/util/storage_file.c:767 src/util/storage_file.c:863 #, c-format msgid "cannot read header '%s'" msgstr "헤더 '%s'를 읽을 수 없음" #: src/util/storage_file.c:798 src/util/storage_file.c:910 #, c-format msgid "cannot open file '%s'" msgstr "파일 '%s'를 열 수 없음" #: src/util/storage_file.c:853 #, fuzzy, c-format msgid "cannot seek to start of '%s'" msgstr "파일 '%s'를 stat할 수 없음" #: src/util/storage_file.c:872 #, fuzzy, c-format msgid "unknown storage file format %d" msgstr "알려지지 않은 저장 볼륨 유형 %d" #: src/util/storage_file.c:948 #, fuzzy, c-format msgid "Unable to open '%s'" msgstr "%s를 열 수 없음" #: src/util/storage_file.c:953 #, fuzzy, c-format msgid "Failed to truncate file '%s'" msgstr "파일 '%s'를 만드는 데 실패" #: src/util/storage_file.c:958 #, fuzzy, c-format msgid "Unable to save '%s'" msgstr "%s를 열 수 없음" #: src/util/storage_file.c:1009 #, fuzzy, c-format msgid "Invalid relative path '%s'" msgstr "도메인 저장 파일에 대해 잘못된 상태 경로 '%s'" #: src/util/storage_file.c:1027 #, fuzzy, c-format msgid "cannot determine filesystem for '%s'" msgstr "파일 '%s'를 확장할 수 없음" #: src/util/storage_file.c:1127 #, fuzzy, c-format msgid "Unable to get LVM key for %s" msgstr "%s에 대한 cgroup을 얻을 수 없음" #: src/util/storage_file.c:1165 #, fuzzy, c-format msgid "Unable to get SCSI key for %s" msgstr "%s에 대한 cgroup을 얻을 수 없음" #: src/util/sysinfo.c:222 src/util/sysinfo.c:366 src/util/sysinfo.c:381 #, fuzzy, c-format msgid "Failed to open %s" msgstr "'%s' 열기 실패" #: src/util/sysinfo.c:407 #, fuzzy msgid "Host sysinfo extraction not supported on this platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/util/sysinfo.c:762 #, fuzzy, c-format msgid "Failed to find path for %s binary" msgstr "풀 %s를 만드는 데 실패" #: src/util/sysinfo.c:772 #, fuzzy, c-format msgid "Failed to execute command %s" msgstr "QEMU 명령 '%s'를 실행할 수 없음" #: src/util/sysinfo.c:976 #, fuzzy, c-format msgid "unexpected sysinfo type model %d" msgstr "예기치 못한 사운드 모델 %d" #: src/util/sysinfo.c:1009 msgid "Target sysinfo does not match source" msgstr "" #: src/util/sysinfo.c:1015 #, c-format msgid "Target sysinfo %s does not match source %s" msgstr "" #: src/util/sysinfo.c:1025 #, c-format msgid "Target sysinfo %s %s does not match source %s" msgstr "" #: src/util/util.c:334 msgid "Unknown poll response." msgstr "알려지지 않은 풀링 응답." #: src/util/util.c:368 msgid "poll error" msgstr "풀링 오류" #: src/util/util.c:457 #, c-format msgid "Failed to open file '%s'" msgstr "'%s' 파일 열기 실패" #: src/util/util.c:464 #, c-format msgid "Failed to read file '%s'" msgstr "'%s' 파일 읽기 실패" #: src/util/util.c:845 #, fuzzy, c-format msgid "failed to create socket needed for '%s'" msgstr "%s로부터 노드 장치를 생성하는 데 실패" #: src/util/util.c:875 #, fuzzy, c-format msgid "child process failed to create file '%s'" msgstr "자식이 파일 '%s'를 만드는 데 실패" #: src/util/util.c:892 #, fuzzy msgid "child process failed to send fd to parent" msgstr "자식이 파이프에 쓰는 것을 실패했습니다" #: src/util/util.c:934 src/util/util.c:1152 #, c-format msgid "failed to wait for child creating '%s'" msgstr "차일드 생성 '%s'를 기다리는 데 실패" #: src/util/util.c:1044 #, fuzzy, c-format msgid "couldn't determine fs type of mount containing '%s'" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: src/util/util.c:1070 #, c-format msgid "failed to create file '%s'" msgstr "파일 '%s'를 만드는 데 실패" #: src/util/util.c:1071 #, fuzzy, c-format msgid "failed to open file '%s'" msgstr "'%s' 파일 열기 실패" #: src/util/util.c:1089 #, c-format msgid "failed to create directory '%s'" msgstr "디렉터리 '%s' 생성 실패" #: src/util/util.c:1182 #, c-format msgid "child failed to create directory '%s'" msgstr "자식이 디렉터리 '%s'를 만드는 데 실패" #: src/util/util.c:1198 #, c-format msgid "cannot chown '%s' to group %u" msgstr "'%s'를 그룹 %u로 chown할 수 없음" #: src/util/util.c:1236 #, fuzzy msgid "virFileOpenAs is not implemented for WIN32" msgstr "%s은 Win32상에서 구현되지 않음" #: src/util/util.c:1248 #, fuzzy msgid "virDirCreate is not implemented for WIN32" msgstr "%s은 Win32상에서 구현되지 않음" #: src/util/util.c:1750 #, fuzzy, c-format msgid "invalid scale %llu" msgstr "잘못된 캡 값" #: src/util/util.c:1766 src/util/util.c:1791 #, fuzzy, c-format msgid "unknown suffix '%s'" msgstr "알려지지 크기 단위 %s" #: src/util/util.c:1797 #, fuzzy, c-format msgid "value too large: %llu%s" msgstr "%s를 열 수 없음" #: src/util/util.c:2183 #, c-format msgid "Disk index %d is negative" msgstr "디스크 인덱스 %d가 음수입니다" #: src/util/util.c:2239 msgid "failed to determine host name" msgstr "호스트 이름을 결정하는 데 실패" #: src/util/util.c:2391 #, fuzzy, c-format msgid "Failed to find user record for uid '%u'" msgstr "uid '%d'에 대한 사용자 레코드를 찾는 데 실패했습니다" #: src/util/util.c:2444 #, fuzzy, c-format msgid "Failed to find group record for gid '%u'" msgstr "이름이 '%s'인 그룹 레코드를 찾는 데 실패했습니다" #: src/util/util.c:2560 #, c-format msgid "Failed to find user record for name '%s'" msgstr "이름이 '%s'인 사용자 레코드를 찾는 데 실패했습니다" #: src/util/util.c:2609 #, c-format msgid "Failed to find group record for name '%s'" msgstr "이름이 '%s'인 그룹 레코드를 찾는 데 실패했습니다" #: src/util/util.c:2637 #, c-format msgid "cannot change to '%d' group" msgstr "'%d' 그룹으로 변경할 수 없음" #: src/util/util.c:2668 #, fuzzy, c-format msgid "cannot getpwuid_r(%d)" msgstr "setuid(%d)를 '%s'를 읽기 위해 할 수 없음" #: src/util/util.c:2675 #, fuzzy, c-format msgid "getpwuid_r failed to retrieve data for uid '%d'" msgstr "자식이 디렉터리 '%s'를 만드는 데 실패" #: src/util/util.c:2684 #, fuzzy, c-format msgid "cannot initgroups(\"%s\", %d)" msgstr "setuid(%d)를 '%s'를 읽기 위해 할 수 없음" #: src/util/util.c:2691 #, fuzzy, c-format msgid "cannot change to uid to '%d'" msgstr "'%d' 사용자로 변경할 수 없음" #: src/util/util.c:2810 #, fuzzy msgid "Unable to determine home directory" msgstr "디렉터리 %s를 열 수 없음" #: src/util/util.c:2826 src/util/util.c:2841 #, fuzzy msgid "Unable to determine config directory" msgstr "호스트 이름을 결정하는 데 실패" #: src/util/util.c:2857 #, fuzzy msgid "virGetUserDirectory is not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/util/util.c:2866 #, fuzzy msgid "virGetUserConfigDirectory is not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/util/util.c:2875 #, fuzzy msgid "virGetUserCacheDirectory is not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/util/util.c:2884 #, fuzzy msgid "virGetUserRuntimeDirectory is not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/util/util.c:2894 #, fuzzy msgid "virGetUserName is not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/util/util.c:2903 #, fuzzy msgid "virGetUserID is not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/util/util.c:2913 #, fuzzy msgid "virGetGroupID is not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/util/util.c:2923 #, fuzzy msgid "virSetUIDGID is not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/util/util.c:2931 #, fuzzy msgid "virGetGroupName is not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/util/viraudit.c:60 #, fuzzy msgid "Unable to initialize audit layer" msgstr "TLS 클라이언트를 초기화할 수 없음: %s" #: src/util/virauth.c:173 #, c-format msgid "Enter username for %s [%s]" msgstr "%s[%s]에 대한 사용자명을 입력하십시오" #: src/util/virauth.c:178 #, c-format msgid "Enter username for %s" msgstr "%s에 대한 사용자명을 입력하십시오" #: src/util/virauth.c:228 #, c-format msgid "Enter %s's password for %s" msgstr "%s에 대한 %s의 암호를 입력하십시오" #: src/util/virauthconfig.c:141 #, fuzzy, c-format msgid "Missing item 'credentials' in group '%s' in '%s'" msgstr "설정 디렉터리 '%s'를 만들 수 없음" #: src/util/virauthconfig.c:153 #, c-format msgid "Missing group 'credentials-%s' referenced from group '%s' in '%s'" msgstr "" #: src/util/virdbus.c:70 #, fuzzy msgid "Unable to run one time DBus initializer" msgstr "파이프를 생성할 수 없" #: src/util/virdbus.c:76 #, fuzzy, c-format msgid "Unable to get DBus system bus connection: %s" msgstr "도메인 상태를 얻는 데 실패" #: src/util/virdbus.c:193 #, fuzzy msgid "DBus support not compiled into this binary" msgstr "이 QEMU 바이너리에서는 SATA를 지원하지 않습니다" #: src/util/virfile.c:178 #, fuzzy msgid "invalid use with no flags" msgstr "잘못된 경로" #: src/util/virfile.c:191 #, fuzzy msgid "O_DIRECT unsupported on this platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/util/virfile.c:203 #, fuzzy, c-format msgid "invalid fd %d for %s" msgstr "잘못된 pid" #: src/util/virfile.c:209 #, fuzzy, c-format msgid "unexpected mode %x for %s" msgstr "예기치 못한 hostdev 모드 %d" #: src/util/virfile.c:216 #, fuzzy, c-format msgid "unable to create pipe for %s" msgstr "파이프를 생성할 수 없" #: src/util/virfile.c:236 #, fuzzy msgid "unable to close pipe" msgstr "파이프를 만들 수 없음" #: src/util/virfile.c:257 #, fuzzy msgid "virFileWrapperFd unsupported on this platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/util/virfile.c:401 src/util/virfile.c:447 #, fuzzy, c-format msgid "cannot create file '%s'" msgstr "%s 파일을 읽을 수 없음" #: src/util/virfile.c:407 #, fuzzy, c-format msgid "cannot write data to file '%s'" msgstr "데이터를 파일 '%s'에 동기화할 수 없음" #: src/util/virfile.c:413 #, fuzzy, c-format msgid "cannot sync file '%s'" msgstr "파일 '%s'를 stat할 수 없음" #: src/util/virfile.c:419 src/util/virfile.c:453 #, fuzzy, c-format msgid "cannot save file '%s'" msgstr "파일 '%s'를 stat할 수 없음" #: src/util/virfile.c:425 #, fuzzy, c-format msgid "cannot rename file '%s' as '%s'" msgstr "파일 '%s'를 열 수 없음" #: src/util/virfile.c:473 #, fuzzy msgid "invalid mode" msgstr "잘못된 포트: %s" #: src/util/virfile.c:491 #, fuzzy, c-format msgid "cannot change permission of '%s'" msgstr "'%d' 사용자로 변경할 수 없음" #: src/util/virfile.c:513 #, fuzzy msgid "Unable to read /dev" msgstr "%s를 열 수 없음" #: src/util/virfile.c:540 #, fuzzy, c-format msgid "Unable to get loop status on %s" msgstr "도메인 상태를 얻는 데 실패" #: src/util/virfile.c:551 #, fuzzy msgid "Unable to find a free loop device in /dev" msgstr "%s 장치를 허용할 수 없음" #: src/util/virfile.c:590 #, fuzzy, c-format msgid "Unable to attach %s to loop device" msgstr "%s 장치를 허용할 수 없음" #: src/util/virfile.c:597 #, fuzzy msgid "Unable to mark loop device as autoclear" msgstr "장치 %s를 %s에 대해 허용할 수 없음" #: src/util/virfile.c:624 #, fuzzy, c-format msgid "Unable to associate file %s with loop device" msgstr "%s 장치를 허용할 수 없음" #: src/util/virhash.c:42 msgid "Hash operation not allowed during iteration" msgstr "" #: src/util/virkeyfile.c:94 #, fuzzy, c-format msgid "%s:%zu: %s '%s'" msgstr "cd: %s: %s" #: src/util/virnetdev.c:61 src/util/virnetdev.c:485 #: src/util/virnetdevbridge.c:61 src/util/virnetdevtap.c:152 #: src/util/virnetdevtap.c:210 #, fuzzy, c-format msgid "Network interface name '%s' is too long" msgstr "설정 파일이름 '%s/%s'가 너무 깁니다" #: src/util/virnetdev.c:68 src/util/virnetdevbridge.c:69 #, fuzzy msgid "Cannot open network interface control socket" msgstr "네트워크 인터페이스 유형" #: src/util/virnetdev.c:74 src/util/virnetdevbridge.c:75 #, fuzzy msgid "Cannot set close-on-exec flag for socket" msgstr "모니터의 close-on-exec 플래그를 설정할 수 없음" #: src/util/virnetdev.c:114 #, fuzzy, c-format msgid "Unable to check interface flags for %s" msgstr "장치 %s를 %s에 대해 허용할 수 없음" #: src/util/virnetdev.c:128 #, fuzzy, c-format msgid "Unable to check interface %s" msgstr "인터페이스 '%s'를 가져오는 데 실패" #: src/util/virnetdev.c:158 src/util/virnetdev.c:212 src/util/virnetdev.c:230 #, fuzzy, c-format msgid "Cannot get interface MAC on '%s'" msgstr "인터페이스 '%s'를 가져오는 데 실패" #: src/util/virnetdev.c:167 src/util/virnetdev.c:183 #, fuzzy, c-format msgid "Cannot set interface MAC on '%s'" msgstr "파일 소유자 '%s'를 설정할 수 없음" #: src/util/virnetdev.c:268 #, fuzzy, c-format msgid "Unable to preserve mac for %s" msgstr "%s를 열 수 없음" #: src/util/virnetdev.c:309 src/util/virnetdev.c:1613 #, fuzzy, c-format msgid "Cannot parse MAC address from '%s'" msgstr "MAC 주소 '%s'를 구문분석 할 수 없음" #: src/util/virnetdev.c:344 src/util/virnetdev.c:359 #, fuzzy, c-format msgid "Cannot get interface MTU on '%s'" msgstr "인터페이스 '%s'를 가져오는 데 실패" #: src/util/virnetdev.c:390 src/util/virnetdev.c:405 #, fuzzy, c-format msgid "Cannot set interface MTU on '%s'" msgstr "파일 소유자 '%s'를 설정할 수 없음" #: src/util/virnetdev.c:492 #, fuzzy, c-format msgid "Unable to rename '%s' to '%s'" msgstr "위치 %lld로 %s에서 이동할 수 없음" #: src/util/virnetdev.c:507 #, fuzzy, c-format msgid "Cannot rename interface '%s' to '%s' on this platform" msgstr "파일 '%s'를 열 수 없음" #: src/util/virnetdev.c:537 src/util/virnetdev.c:597 src/util/virnetdev.c:614 #, fuzzy, c-format msgid "Cannot get interface flags on '%s'" msgstr "macvtap 탭상의 인터페이스 플래그를 얻을 수 었습니다" #: src/util/virnetdev.c:551 src/util/virnetdev.c:568 #, fuzzy, c-format msgid "Cannot set interface flags on '%s'" msgstr "macvtap 탭상의 인터페이스 플래그를 얻을 수 었습니다" #: src/util/virnetdev.c:639 src/util/virnetdev.c:688 #, fuzzy msgid "Unable to open control socket" msgstr "%s를 열 수 없음" #: src/util/virnetdev.c:648 src/util/virnetdev.c:694 #, c-format msgid "invalid interface name %s" msgstr "잘못된 인터페이스 이름 %s" #: src/util/virnetdev.c:655 #, fuzzy, c-format msgid "Unable to get index for interface %s" msgstr "인터페이스에 대한 브리지 얻기 실패" #: src/util/virnetdev.c:671 #, fuzzy msgid "Unable to get interface index on this platform" msgstr "인터페이스 정보 보기 실패" #: src/util/virnetdev.c:701 #, fuzzy, c-format msgid "Unable to get VLAN for interface %s" msgstr "인터페이스 '%s'를 가져오는 데 실패" #: src/util/virnetdev.c:718 #, fuzzy msgid "Unable to get VLAN on this platform" msgstr "호스트명 보기 실패" #: src/util/virnetdev.c:836 #, fuzzy, c-format msgid "Unable to get IPv4 address for interface %s" msgstr "인터페이스 MAC 주소를 인터페이스 이름으로 변환합니다" #: src/util/virnetdev.c:856 #, fuzzy msgid "Unable to get IPv4 address on this platform" msgstr "%s로부터 노드 장치를 생성하는 데 실패" #: src/util/virnetdev.c:902 #, fuzzy, c-format msgid "could not get MAC address of interface %s" msgstr "인터페이스 MAC 주소를 인터페이스 이름으로 변환합니다" #: src/util/virnetdev.c:935 #, fuzzy msgid "Unable to check interface config on this platform" msgstr "모니터 유형을 처리할 수 없음: %s" #: src/util/virnetdev.c:1013 #, fuzzy msgid "Failed to get PCI Config Address String" msgstr "mac 주소 '%s' 구문 분석할 수 없습니다" #: src/util/virnetdev.c:1018 #, fuzzy msgid "Failed to get PCI SYSFS file" msgstr "PCI 장치를 리셋하는 데 실패: %s" #: src/util/virnetdev.c:1174 #, fuzzy msgid "Unable to get virtual functions on this platform" msgstr "모니터 경로 %s를 열 수 없음" #: src/util/virnetdev.c:1182 #, fuzzy msgid "Unable to check virtual function status on this platform" msgstr "도메인 상태를 얻는 데 실패" #: src/util/virnetdev.c:1192 #, fuzzy msgid "Unable to get virtual function index on this platform" msgstr "모니터 경로 %s를 열 수 없음" #: src/util/virnetdev.c:1201 #, fuzzy msgid "Unable to get physical function status on this platform" msgstr "도메인 상태를 얻는 데 실패" #: src/util/virnetdev.c:1211 #, fuzzy msgid "Unable to get virtual function info on this platform" msgstr "모니터 경로 %s를 열 수 없음" #: src/util/virnetdev.c:1297 #, fuzzy, c-format msgid "error dumping %s (%d) interface" msgstr "인터페이스 %s를 파괴하는 중 오류" #: src/util/virnetdev.c:1323 src/util/virnetdev.c:1448 #: src/util/virnetdevmacvlan.c:200 src/util/virnetdevmacvlan.c:280 #: src/util/virnetdevvportprofile.c:752 msgid "malformed netlink response message" msgstr "잘못된 형식의 넷링크 응답 메시지" #: src/util/virnetdev.c:1328 src/util/virnetdev.c:1453 #: src/util/virnetdevmacvlan.c:205 src/util/virnetdevmacvlan.c:285 #: src/util/virnetdevvportprofile.c:757 #, fuzzy msgid "allocated netlink buffer is too small" msgstr "내부 버퍼가 너무 작습니다" #: src/util/virnetdev.c:1426 #, fuzzy, c-format msgid "error during set %s of ifindex %d" msgstr "초기 설정 생성 오류" #: src/util/virnetdev.c:1478 msgid "error parsing IFLA_VF_INFO" msgstr "" #: src/util/virnetdev.c:1560 #, fuzzy, c-format msgid "Unable to preserve mac/vlan tag for pf = %s, vf = %d" msgstr "%s를 열 수 없음" #: src/util/virnetdev.c:1604 #, fuzzy, c-format msgid "Cannot parse vlan tag from '%s'" msgstr "비디오 램 '%s'을 구문 분석할 수 없음" #: src/util/virnetdev.c:1682 #, fuzzy msgid "Unable to dump link info on this platform" msgstr "인터페이스 정보 보기 실패" #: src/util/virnetdev.c:1694 #, fuzzy msgid "Unable to replace net config on this platform" msgstr "모니터 유형을 처리할 수 없음: %s" #: src/util/virnetdev.c:1705 #, fuzzy msgid "Unable to restore net config on this platform" msgstr "모니터 유형을 처리할 수 없음: %s" #: src/util/virnetdevbridge.c:118 src/util/virnetdevbridge.c:129 #: src/util/virnetdevbridge.c:136 #, fuzzy, c-format msgid "Unable to set bridge %s %s" msgstr "PCI 장치 %s를 리셋할 수 없음: %s" #: src/util/virnetdevbridge.c:170 src/util/virnetdevbridge.c:182 #: src/util/virnetdevbridge.c:192 #, fuzzy, c-format msgid "Unable to get bridge %s %s" msgstr "%s를 열 수 없음" #: src/util/virnetdevbridge.c:224 src/util/virnetdevbridge.c:238 #, fuzzy, c-format msgid "Unable to create bridge %s" msgstr "파이프를 생성할 수 없" #: src/util/virnetdevbridge.c:262 src/util/virnetdevbridge.c:276 #, fuzzy, c-format msgid "Unable to delete bridge %s" msgstr "비밀정보 %s 삭제 실패" #: src/util/virnetdevbridge.c:303 src/util/virnetdevbridge.c:350 #, fuzzy, c-format msgid "Unable to get interface index for %s" msgstr "인터페이스 정보 보기 실패" #: src/util/virnetdevbridge.c:309 src/util/virnetdevbridge.c:323 #, fuzzy, c-format msgid "Unable to add bridge %s port %s" msgstr "장치 %s를 %s에 대해 허용할 수 없음" #: src/util/virnetdevbridge.c:357 src/util/virnetdevbridge.c:371 #, fuzzy, c-format msgid "Unable to remove bridge %s port %s" msgstr "%s를 열 수 없음" #: src/util/virnetdevbridge.c:502 #, fuzzy, c-format msgid "Unable to set STP delay on %s on this platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/util/virnetdevbridge.c:510 #, fuzzy, c-format msgid "Unable to get STP delay on %s on this platform" msgstr "도메인 상태를 얻는 데 실패" #: src/util/virnetdevbridge.c:520 #, fuzzy, c-format msgid "Unable to set STP on %s on this platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/util/virnetdevbridge.c:528 #, fuzzy, c-format msgid "Unable to get STP on %s on this platform" msgstr "도메인 상태를 얻는 데 실패" #: src/util/virnetdevmacvlan.c:179 #, c-format msgid "error creating %s type of interface" msgstr "인터페이스 %s 유형을 생성하는 중 오류" #: src/util/virnetdevmacvlan.c:259 #, c-format msgid "error destroying %s interface" msgstr "인터페이스 %s를 파괴하는 중 오류" #: src/util/virnetdevmacvlan.c:312 msgid "buffer for ifindex path is too small" msgstr "ifindex 경로를 위한 버퍼가 너무 작습니다" #: src/util/virnetdevmacvlan.c:320 #, c-format msgid "cannot open macvtap file %s to determine interface index" msgstr "인터페이스 인덱스를 결정하기 위해 %s macvtap 파일을 열 수 없습니다." #: src/util/virnetdevmacvlan.c:327 msgid "cannot determine macvtap's tap device interface index" msgstr "macvtap의 탭 장치 인터페이스 인덱스를 결정할 수 없습니다" #: src/util/virnetdevmacvlan.c:339 msgid "internal buffer for tap device is too small" msgstr "탭 장치에 대한 내부 버퍼가 너무 작습니다" #: src/util/virnetdevmacvlan.c:356 #, c-format msgid "cannot open macvtap tap device %s" msgstr " %s macvtap 탭 장치를 열 수 없습니다" #: src/util/virnetdevmacvlan.c:390 msgid "cannot get interface flags on macvtap tap" msgstr "macvtap 탭상의 인터페이스 플래그를 얻을 수 었습니다" #: src/util/virnetdevmacvlan.c:399 msgid "cannot clean IFF_VNET_HDR flag on macvtap tap" msgstr "macvtap 탭 상의 IFF_VNET_HDR 플래그를 끌 수 없습니다" #: src/util/virnetdevmacvlan.c:403 #, fuzzy msgid "cannot get feature flags on macvtap tap" msgstr "macvtap 탭상의 인터페이스 플래그를 얻을 수 었습니다" #: src/util/virnetdevmacvlan.c:408 msgid "cannot set IFF_VNET_HDR flag on macvtap tap" msgstr "macvtap 탭 상의 IFF_VNET_HDR 플래그를 켤 수 없습니다" #: src/util/virnetdevmacvlan.c:863 #, fuzzy, c-format msgid "Unable to create macvlan device %s" msgstr "블럭 이름 %s 구문 분석 실패" #: src/util/virnetdevmacvlan.c:1061 src/util/virnetdevmacvlan.c:1068 #: src/util/virnetdevmacvlan.c:1086 src/util/virnetdevmacvlan.c:1098 #: src/util/virnetdevmacvlan.c:1110 src/util/virnetdevmacvlan.c:1122 #, fuzzy msgid "Cannot create macvlan devices on this platform" msgstr "이 플랫폼에는 노드 정보가 구현되어 있지 않습니다" #: src/util/virnetdevopenvswitch.c:135 #, fuzzy, c-format msgid "Unable to add port %s to OVS bridge %s" msgstr "장치 %s를 %s에 대해 허용할 수 없음" #: src/util/virnetdevopenvswitch.c:173 #, fuzzy, c-format msgid "Unable to delete port %s from OVS" msgstr "비밀정보 %s 삭제 실패" #: src/util/virnetdevtap.c:136 src/util/virnetdevtap.c:201 msgid "Unable to open /dev/net/tun, is tun module loaded?" msgstr "" #: src/util/virnetdevtap.c:160 #, fuzzy, c-format msgid "Unable to create tap device %s" msgstr "파이프를 생성할 수 없" #: src/util/virnetdevtap.c:168 #, fuzzy, c-format msgid "Unable to set tap device %s to persistent" msgstr "PCI 장치 %s를 리셋할 수 없음: %s" #: src/util/virnetdevtap.c:217 #, fuzzy msgid "Unable to associate TAP device" msgstr "%s 장치를 허용할 수 없음" #: src/util/virnetdevtap.c:223 #, fuzzy msgid "Unable to make TAP device non-persistent" msgstr "장치 %s를 %s에 대해 허용할 수 없음" #: src/util/virnetdevtap.c:239 #, fuzzy msgid "Unable to create TAP devices on this platform" msgstr "vlan없이 네트워크 장치를 부착할 수 없음" #: src/util/virnetdevtap.c:245 #, fuzzy msgid "Unable to delete TAP devices on this platform" msgstr "%s에 대해 모든 장치를 거부할 수 없음" #: src/util/virnetdevtap.c:306 #, c-format msgid "" "Unable to use MAC address starting with reserved value 0xFE - '%02X:%02X:" "%02X:%02X:%02X:%02X' - " msgstr "" #: src/util/virnetdevvportprofile.c:186 #, fuzzy, c-format msgid "missing %s in " msgstr "제품 빠짐" #: src/util/virnetdevvportprofile.c:243 #, fuzzy, c-format msgid "extra %s unsupported in " msgstr "지원하지 않는 모니터 유형 '%s'" #: src/util/virnetdevvportprofile.c:271 #, c-format msgid "attempt to merge virtualports with mismatched types (%s and %s)" msgstr "" #: src/util/virnetdevvportprofile.c:286 #, c-format msgid "attempt to merge virtualports with mismatched managerids (%d and %d)" msgstr "" #: src/util/virnetdevvportprofile.c:301 #, c-format msgid "attempt to merge virtualports with mismatched typeids (%d and %d)" msgstr "" #: src/util/virnetdevvportprofile.c:316 #, c-format msgid "" "attempt to merge virtualports with mismatched typeidversions (%d and %d)" msgstr "" #: src/util/virnetdevvportprofile.c:335 #, c-format msgid "" "attempt to merge virtualports with mismatched instanceids ('%s' and '%s')" msgstr "" #: src/util/virnetdevvportprofile.c:355 #, c-format msgid "" "attempt to merge virtualports with mismatched interfaceids ('%s' and '%s')" msgstr "" #: src/util/virnetdevvportprofile.c:372 #, c-format msgid "" "attempt to merge virtualports with mismatched profileids ('%s' and '%s')" msgstr "" #: src/util/virnetdevvportprofile.c:381 #, fuzzy msgid "corrupted profileid string" msgstr "종료되지 않은 문자열" #: src/util/virnetdevvportprofile.c:463 #, fuzzy msgid "error parsing pid of lldpad" msgstr "프로파일 이름 복사 중 오류" #: src/util/virnetdevvportprofile.c:468 #, fuzzy, c-format msgid "Error opening file %s" msgstr "프로파일 이름 복사 중 오류" #: src/util/virnetdevvportprofile.c:503 msgid "error parsing IFLA_PORT_SELF part" msgstr "" #: src/util/virnetdevvportprofile.c:508 msgid "IFLA_PORT_SELF is missing" msgstr "" #: src/util/virnetdevvportprofile.c:521 msgid "error while iterating over IFLA_VF_PORTS part" msgstr "" #: src/util/virnetdevvportprofile.c:529 msgid "error parsing IFLA_VF_PORT part" msgstr "" #: src/util/virnetdevvportprofile.c:548 msgid "Could not find netlink response with expected parameters" msgstr "" #: src/util/virnetdevvportprofile.c:554 msgid "IFLA_VF_PORTS is missing" msgstr "" #: src/util/virnetdevvportprofile.c:569 msgid "no IFLA_PORT_RESPONSE found in netlink message" msgstr "" #: src/util/virnetdevvportprofile.c:731 #, fuzzy, c-format msgid "error during virtual port configuration of ifindex %d" msgstr "초기 설정 생성 오류" #: src/util/virnetdevvportprofile.c:805 #, fuzzy msgid "buffer for root interface name is too small" msgstr "ifindex 경로를 위한 버퍼가 너무 작습니다" #: src/util/virnetdevvportprofile.c:864 msgid "sending of PortProfileRequest failed." msgstr "" #: src/util/virnetdevvportprofile.c:894 #, c-format msgid "error %d during port-profile setlink on interface %s (%d)" msgstr "" #: src/util/virnetdevvportprofile.c:908 msgid "port-profile setlink timed out" msgstr "" #: src/util/virnetdevvportprofile.c:997 src/util/virnetdevvportprofile.c:1113 #, fuzzy, c-format msgid "operation type %d not supported" msgstr "네트워크 유형 %d를 지원하지 않습니다" #: src/util/virnetdevvportprofile.c:1260 src/util/virnetdevvportprofile.c:1272 #, fuzzy msgid "Virtual port profile association not supported on this platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/util/virnetlink.c:140 #, fuzzy msgid "cannot allocate placeholder nlhandle for netlink" msgstr "mechlist를 할당할 수 없습니다" #: src/util/virnetlink.c:199 src/util/virnetlink.c:461 #: src/util/virnetlink.c:510 #, fuzzy, c-format msgid "invalid protocol argument: %d" msgstr "%s에 있는 잘못된 인수" #: src/util/virnetlink.c:206 #, fuzzy msgid "cannot allocate nlhandle for netlink" msgstr "mechlist를 할당할 수 없습니다" #: src/util/virnetlink.c:212 src/util/virnetlink.c:542 #, fuzzy, c-format msgid "cannot connect to netlink socket with protocol %d" msgstr "넷링크 소켓에 송신할 수 없습니다" #: src/util/virnetlink.c:221 src/util/virnetlink.c:549 #, fuzzy msgid "cannot get netlink socket fd" msgstr "netlink 소켓을 열 수 없음" #: src/util/virnetlink.c:228 src/util/virnetlink.c:555 #, fuzzy msgid "cannot add netlink membership" msgstr "넷링크 소켓에 송신할 수 없습니다" #: src/util/virnetlink.c:240 msgid "cannot send to netlink socket" msgstr "넷링크 소켓에 송신할 수 없습니다" #: src/util/virnetlink.c:252 msgid "error in select call" msgstr "" #: src/util/virnetlink.c:255 #, fuzzy msgid "no valid netlink response was received" msgstr "잘못된 형식의 넷링크 응답 메시지" #: src/util/virnetlink.c:263 #, fuzzy msgid "nl_recv failed" msgstr "이전이 실패했습니다" #: src/util/virnetlink.c:339 msgid "nl_recv returned with error" msgstr "" #: src/util/virnetlink.c:484 msgid "netlink event service not running" msgstr "" #: src/util/virnetlink.c:536 #, fuzzy msgid "cannot allocate nlhandle for virNetlinkEvent server" msgstr "mechlist를 할당할 수 없습니다" #: src/util/virnetlink.c:561 #, fuzzy msgid "cannot set netlink socket nonblocking" msgstr "넷링크 소켓에 송신할 수 없습니다" #: src/util/virnetlink.c:570 #, fuzzy msgid "Failed to add netlink event handle watch" msgstr "시그널 파이프에서 읽기에 실패했습니다: %s " #: src/util/virnetlink.c:627 #, fuzzy msgid "Invalid NULL callback provided" msgstr "권한 설정 콜백이 제공되지 않았습니다." #: src/util/virnetlink.c:735 msgid "libnl was not available at build time" msgstr "" #: src/util/virnodesuspend.c:89 #, fuzzy msgid "Suspend duration is too short" msgstr "일시정지 동작이 실패했습니다" #: src/util/virnodesuspend.c:195 #, fuzzy msgid "Suspend operation already in progress" msgstr "일시정지 동작이 실패했습니다" #: src/util/virnodesuspend.c:203 msgid "Suspend-to-RAM" msgstr "" #: src/util/virnodesuspend.c:211 msgid "Suspend-to-Disk" msgstr "" #: src/util/virnodesuspend.c:219 msgid "Hybrid-Suspend" msgstr "" #: src/util/virnodesuspend.c:226 #, fuzzy msgid "Invalid suspend target" msgstr "잘못된 비밀정보" #: src/util/virnodesuspend.c:236 #, fuzzy msgid "Failed to create thread to suspend the host" msgstr "polkit 문맥 %s를 생성하는 데 실패했습니다" #: src/util/virpidfile.c:332 #, fuzzy, c-format msgid "Failed to open pid file '%s'" msgstr "'%s' 파일 열기 실패" #: src/util/virpidfile.c:339 #, fuzzy, c-format msgid "Failed to set close-on-exec flag '%s'" msgstr "" "exec시 닫기(close-on-exec) 디스크립터 플래그를 설정하는 데 실패했습니다" #: src/util/virpidfile.c:347 #, fuzzy, c-format msgid "Unable to check status of pid file '%s'" msgstr "%s 장치를 허용할 수 없음" #: src/util/virpidfile.c:355 #, fuzzy, c-format msgid "Failed to acquire pid file '%s'" msgstr "'%s' 파일 읽기 실패" #: src/util/virpidfile.c:385 #, fuzzy, c-format msgid "Failed to write to pid file '%s'" msgstr "'%s' pid 파일 쓰기에 실패했습니다 : %s " #: src/util/virrandom.c:159 #, fuzzy msgid "argument virt_type must not be NULL" msgstr "플래그가 0이어야 합니다" #: src/util/virrandom.c:176 #, fuzzy msgid "Unsupported virt type" msgstr "지원하지 않는 장치 유형" #: src/util/virsocketaddr.c:92 src/util/virsocketaddr.c:230 #, fuzzy msgid "Missing address" msgstr "MAC 주소" #: src/util/virsocketaddr.c:101 #, fuzzy, c-format msgid "Cannot parse socket address '%s': %s" msgstr "주소 %d를 해석할 수 없습니다: %s" #: src/util/virsocketaddr.c:108 #, fuzzy, c-format msgid "No socket addresses found for '%s'" msgstr "'%s'에 대해('%s'안에 있음) 안정된 경로를 찾을 수 없습니다" #: src/util/virsocketaddr.c:254 #, fuzzy, c-format msgid "Cannot convert socket address to string: %s" msgstr "주소 %d를 해석할 수 없습니다: %s" #: src/util/virterror.c:162 msgid "An error occurred, but the cause is unknown" msgstr "" #: src/util/virterror.c:509 msgid "warning" msgstr "경고" #: src/util/virterror.c:512 tools/virsh-domain-monitor.c:129 msgid "error" msgstr "오류" #: src/util/virterror.c:644 msgid "No error message provided" msgstr "오류 메세지 없음" #: src/util/virterror.c:707 #, c-format msgid "internal error %s" msgstr "내부 오류 %s" #: src/util/virterror.c:709 msgid "internal error" msgstr "내부 오류" #: src/util/virterror.c:712 tools/virsh.c:518 tools/virsh-domain.c:7527 msgid "out of memory" msgstr "메모리 부족" #: src/util/virterror.c:716 #, fuzzy msgid "this function is not supported by the connection driver" msgstr "이 기능은 하이퍼바이저로 지원되지 않음" #: src/util/virterror.c:718 #, fuzzy, c-format msgid "this function is not supported by the connection driver: %s" msgstr "이 기능은 하이퍼바이저로 지원되지 않음: %s" #: src/util/virterror.c:722 #, fuzzy msgid "no connection driver available" msgstr "사용 가능한 하이퍼바이저 드라이버가 없음" #: src/util/virterror.c:724 #, fuzzy, c-format msgid "no connection driver available for %s" msgstr "%s에 대해 사용 가능한 하이퍼바이저 드라이버가 없음" #: src/util/virterror.c:728 msgid "invalid connection pointer in" msgstr "잘못된 연결 포인터" #: src/util/virterror.c:730 #, c-format msgid "invalid connection pointer in %s" msgstr "%s에 있는 잘못된 연결 포인터" #: src/util/virterror.c:734 msgid "invalid domain pointer in" msgstr "잘못된 도메인 포인터" #: src/util/virterror.c:736 #, c-format msgid "invalid domain pointer in %s" msgstr "%s에 있는 잘못된 도메인 포인터" #: src/util/virterror.c:740 src/xen/xen_hypervisor.c:3341 #: src/xen/xen_hypervisor.c:3355 src/xen/xen_hypervisor.c:3617 #, fuzzy msgid "invalid argument" msgstr "잘못된 인수" #: src/util/virterror.c:742 #, fuzzy, c-format msgid "invalid argument: %s" msgstr "%s에 있는 잘못된 인수" #: src/util/virterror.c:746 #, c-format msgid "operation failed: %s" msgstr "작업 실패: %s" #: src/util/virterror.c:748 msgid "operation failed" msgstr "작업 실패" #: src/util/virterror.c:752 #, c-format msgid "GET operation failed: %s" msgstr "GET 작업 실패: %s" #: src/util/virterror.c:754 msgid "GET operation failed" msgstr "GET 작업 실패" #: src/util/virterror.c:758 #, c-format msgid "POST operation failed: %s" msgstr "POST 작업 실패: %s" #: src/util/virterror.c:760 msgid "POST operation failed" msgstr "POST 작업 실패" #: src/util/virterror.c:763 #, c-format msgid "got unknown HTTP error code %d" msgstr "알려지지 않은 HTTP 오류 코드 %d가 있음" #: src/util/virterror.c:767 #, c-format msgid "unknown host %s" msgstr "알려지지 않은 호스트 %s" #: src/util/virterror.c:769 msgid "unknown host" msgstr "알려지지 않은 호스트" #: src/util/virterror.c:773 #, c-format msgid "failed to serialize S-Expr: %s" msgstr "S-Expr 나열하기 실패: %s" #: src/util/virterror.c:775 msgid "failed to serialize S-Expr" msgstr "S-Expr 나열하기 실패" #: src/util/virterror.c:779 msgid "could not use Xen hypervisor entry" msgstr "Xen 하이퍼바이저 항목을 사용할 수 없음" #: src/util/virterror.c:781 #, c-format msgid "could not use Xen hypervisor entry %s" msgstr "Xen 하이퍼바이저 항목 %s을 사용할 수 없음" #: src/util/virterror.c:785 msgid "could not connect to Xen Store" msgstr "Xen Store에 연결할 수 없음" #: src/util/virterror.c:787 #, c-format msgid "could not connect to Xen Store %s" msgstr "Xen Store %s에 연결할 수 없음" #: src/util/virterror.c:790 #, c-format msgid "failed Xen syscall %s" msgstr "Xen syscall %s 실패" #: src/util/virterror.c:794 msgid "unknown OS type" msgstr "알려지지 않은 OS 유형" #: src/util/virterror.c:796 #, c-format msgid "unknown OS type %s" msgstr "알려지지 않은 OS 유형 %s" #: src/util/virterror.c:799 msgid "missing kernel information" msgstr "커널 정보 부재" #: src/util/virterror.c:803 msgid "missing root device information" msgstr "root 장치 정보 부재" #: src/util/virterror.c:805 #, c-format msgid "missing root device information in %s" msgstr "%s에 있는 root 장치 정보 부재" #: src/util/virterror.c:809 msgid "missing source information for device" msgstr "장치의 소스 정보 부재" #: src/util/virterror.c:811 #, c-format msgid "missing source information for device %s" msgstr "%s 장치의 소스 정보 부재" #: src/util/virterror.c:815 msgid "missing target information for device" msgstr "장치의 대상 정보 부재" #: src/util/virterror.c:817 #, c-format msgid "missing target information for device %s" msgstr "%s 장치의 대상 정보 부재" #: src/util/virterror.c:821 #, fuzzy msgid "missing name information" msgstr "커널 정보 부재" #: src/util/virterror.c:823 #, fuzzy, c-format msgid "missing name information in %s" msgstr "%s에 있는 도메인 이름 정보 부재" #: src/util/virterror.c:827 msgid "missing operating system information" msgstr "운영 시스템 정보 부재" #: src/util/virterror.c:829 #, c-format msgid "missing operating system information for %s" msgstr "%s의 운영 시스템 정보 부재" #: src/util/virterror.c:833 msgid "missing devices information" msgstr "장치 정보 부재" #: src/util/virterror.c:835 #, c-format msgid "missing devices information for %s" msgstr "%s의 장치 정보 부재" #: src/util/virterror.c:839 msgid "too many drivers registered" msgstr "과도한 드라이버가 등록됨" #: src/util/virterror.c:841 #, c-format msgid "too many drivers registered in %s" msgstr "과도한 드라이버가 %s에 등록됨" #: src/util/virterror.c:845 msgid "library call failed, possibly not supported" msgstr "라이브러리가 지원되지 않아 라이브러리 호출 실패" #: src/util/virterror.c:847 #, c-format msgid "library call %s failed, possibly not supported" msgstr "라이브러리가 지원되지 않아 %s 라이브러리 호출 실패" #: src/util/virterror.c:851 #, fuzzy msgid "XML description is invalid or not well formed" msgstr "%s에 대한 XML 설명이 잘 작성되지 않았거나 유효하지 않음" #: src/util/virterror.c:853 #, fuzzy, c-format msgid "XML error: %s" msgstr "%s: 오류: %s\n" #: src/util/virterror.c:857 msgid "this domain exists already" msgstr "이미 도메인이 존재함" #: src/util/virterror.c:859 #, c-format msgid "domain %s exists already" msgstr "이미 %s 도메인이 존재함" #: src/util/virterror.c:863 msgid "operation forbidden for read only access" msgstr "읽기 전용 액세스에 대해 작업이 허용되지 않음" #: src/util/virterror.c:865 #, c-format msgid "operation %s forbidden for read only access" msgstr "읽기 전용 액세스에 대해 %s 작업이 허용되지 않음" #: src/util/virterror.c:869 msgid "failed to open configuration file for reading" msgstr "읽기 용 설정 파일 열기 실패" #: src/util/virterror.c:871 #, c-format msgid "failed to open %s for reading" msgstr "읽기 용 %s 열기 실패" #: src/util/virterror.c:875 msgid "failed to read configuration file" msgstr "설정 파일 읽기 실패" #: src/util/virterror.c:877 #, c-format msgid "failed to read configuration file %s" msgstr "%s 설정 파일 읽기 실패" #: src/util/virterror.c:881 msgid "failed to parse configuration file" msgstr "설정 파일 구문 분석 실패" #: src/util/virterror.c:883 #, c-format msgid "failed to parse configuration file %s" msgstr "%s 설정 파일 구문 분석 실패" #: src/util/virterror.c:887 msgid "configuration file syntax error" msgstr "설정 파일 구문 오류" #: src/util/virterror.c:889 #, c-format msgid "configuration file syntax error: %s" msgstr "설정 파일 구문 오류: %s" #: src/util/virterror.c:893 msgid "failed to write configuration file" msgstr "설정 파일 쓰기 실패" #: src/util/virterror.c:895 #, c-format msgid "failed to write configuration file: %s" msgstr "설정 파일 쓰기 실패: %s" #: src/util/virterror.c:899 msgid "parser error" msgstr "구문 분석 오류" #: src/util/virterror.c:905 msgid "invalid network pointer in" msgstr "잘못된 네트워크 포인터" #: src/util/virterror.c:907 #, c-format msgid "invalid network pointer in %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/util/virterror.c:911 msgid "this network exists already" msgstr "이미 네트워크가 있음" #: src/util/virterror.c:913 #, c-format msgid "network %s exists already" msgstr "이미 네트워크 %s이(가) 있음" #: src/util/virterror.c:917 msgid "system call error" msgstr "시스템 호출 오류" #: src/util/virterror.c:923 msgid "RPC error" msgstr "RPC 오류" #: src/util/virterror.c:929 msgid "GNUTLS call error" msgstr "GNUTLS 호출 오류" #: src/util/virterror.c:935 msgid "Failed to find the network" msgstr "네트워크 찾기 실패" #: src/util/virterror.c:937 #, c-format msgid "Failed to find the network: %s" msgstr "네트워크 찾기 실패: %s" #: src/util/virterror.c:941 msgid "Domain not found" msgstr "도메인을 찾을 수 없음" #: src/util/virterror.c:943 #, c-format msgid "Domain not found: %s" msgstr "도메인을 찾을 수 없음: %s" #: src/util/virterror.c:947 msgid "Network not found" msgstr "네트워크를 찾을 수 없음" #: src/util/virterror.c:949 #, c-format msgid "Network not found: %s" msgstr "네트워크를 찾을 수 없음: %s" #: src/util/virterror.c:953 msgid "invalid MAC address" msgstr "잘못된 MAC 주소" #: src/util/virterror.c:955 #, c-format msgid "invalid MAC address: %s" msgstr "잘못된 MAC 주소: %s" #: src/util/virterror.c:961 #, c-format msgid "authentication failed: %s" msgstr "인증이 실패했습니다: %s" #: src/util/virterror.c:965 #, fuzzy msgid "authentication cancelled" msgstr "인증이 실패했습니다" #: src/util/virterror.c:967 #, fuzzy, c-format msgid "authentication cancelled: %s" msgstr "인증이 실패했습니다: %s" #: src/util/virterror.c:971 msgid "Storage pool not found" msgstr "저장소 풀을 찾을 수 없음" #: src/util/virterror.c:973 #, c-format msgid "Storage pool not found: %s" msgstr "저장소 풀을 찾을 수 없음: %s" #: src/util/virterror.c:977 msgid "Storage volume not found" msgstr "저장소 볼륨을 찾을 수 없음" #: src/util/virterror.c:979 #, c-format msgid "Storage volume not found: %s" msgstr "저장소 볼륨을 찾을 수 없음: %s" #: src/util/virterror.c:983 #, fuzzy msgid "Storage pool probe failed" msgstr "저장소 풀을 찾을 수 없음" #: src/util/virterror.c:985 #, fuzzy, c-format msgid "Storage pool probe failed: %s" msgstr "저장소 풀을 찾을 수 없음: %s" #: src/util/virterror.c:989 #, fuzzy msgid "Storage pool already built" msgstr "저장소 풀이 이미 존재합니다" #: src/util/virterror.c:991 #, fuzzy, c-format msgid "Storage pool already built: %s" msgstr "저장소 풀이 이미 존재합니다" #: src/util/virterror.c:995 msgid "invalid storage pool pointer in" msgstr "내부에 잘못된 저장소 포인터" #: src/util/virterror.c:997 #, c-format msgid "invalid storage pool pointer in %s" msgstr "%s 내부에 잘못된 저장소 포인터" #: src/util/virterror.c:1001 msgid "invalid storage volume pointer in" msgstr "내부에 잘못된 저장소 볼륨 포인터" #: src/util/virterror.c:1003 #, c-format msgid "invalid storage volume pointer in %s" msgstr " %s 내부에 잘못된 저장소 볼륨 포인터" #: src/util/virterror.c:1007 msgid "Failed to find a storage driver" msgstr "저장소 드라이버를 찾는 데 실패" #: src/util/virterror.c:1009 #, c-format msgid "Failed to find a storage driver: %s" msgstr "저장소 드라이버를 찾는 데 실패: %s" #: src/util/virterror.c:1013 msgid "Failed to find a node driver" msgstr "노드 드라이버를 찾는 데 실패" #: src/util/virterror.c:1015 #, c-format msgid "Failed to find a node driver: %s" msgstr "노드 드라이버를 찾는 데 실패: %s" #: src/util/virterror.c:1019 msgid "invalid node device pointer" msgstr "잘못된 노드 장치 포인터" #: src/util/virterror.c:1021 #, c-format msgid "invalid node device pointer in %s" msgstr "%s내에 잘못된 노드 장치 포인터" #: src/util/virterror.c:1025 msgid "Node device not found" msgstr "노드 디바이스 찾을 수 없음" #: src/util/virterror.c:1027 #, c-format msgid "Node device not found: %s" msgstr "노드 디바이스 찾을 수 없음: %s" #: src/util/virterror.c:1031 msgid "Security model not found" msgstr "보안 모델 찾을 수 없음" #: src/util/virterror.c:1033 #, c-format msgid "Security model not found: %s" msgstr "보안 모델 찾을 수 없음: %s" #: src/util/virterror.c:1037 msgid "Requested operation is not valid" msgstr "요청한 동작이 바르지 않습니다" #: src/util/virterror.c:1039 #, c-format msgid "Requested operation is not valid: %s" msgstr "요청한 동작이 바르지 않습니다: %s" #: src/util/virterror.c:1043 msgid "Failed to find the interface" msgstr "인터페이스 검색 실패" #: src/util/virterror.c:1045 #, c-format msgid "Failed to find the interface: %s" msgstr "인터페이스 검색 실패: %s" #: src/util/virterror.c:1049 msgid "Interface not found" msgstr "인터페이스를 찾을 수 없음" #: src/util/virterror.c:1051 #, c-format msgid "Interface not found: %s" msgstr "인터페이스를 찾을 수 없음: %s" #: src/util/virterror.c:1055 msgid "invalid interface pointer in" msgstr "내부에 잘못된 인터페이스 포인터" #: src/util/virterror.c:1057 #, c-format msgid "invalid interface pointer in %s" msgstr "%s 내부에 잘못된 인터페이스 포인터" #: src/util/virterror.c:1061 msgid "multiple matching interfaces found" msgstr "일치하는 인터페이스를 여러개 찾음" #: src/util/virterror.c:1063 #, c-format msgid "multiple matching interfaces found: %s" msgstr "일치하는 인터페이스를 여러개 찾음: %s" #: src/util/virterror.c:1067 msgid "Failed to find a secret storage driver" msgstr "비밀 저장소 드라이버를 찾는 데 실패" #: src/util/virterror.c:1069 #, c-format msgid "Failed to find a secret storage driver: %s" msgstr "비밀 저장소 드라이버를 찾는 데 실패: %s" #: src/util/virterror.c:1073 msgid "Invalid secret" msgstr "잘못된 비밀정보" #: src/util/virterror.c:1075 #, c-format msgid "Invalid secret: %s" msgstr "잘못된 비밀정보: %s" #: src/util/virterror.c:1079 msgid "Secret not found" msgstr "비밀정보를 찾을 수 없음" #: src/util/virterror.c:1081 #, c-format msgid "Secret not found: %s" msgstr "비밀정보를 찾을 수 없음: %s" #: src/util/virterror.c:1085 #, fuzzy msgid "Failed to start the nwfilter driver" msgstr "보안 드라이버 시작 실패" #: src/util/virterror.c:1087 #, fuzzy, c-format msgid "Failed to start the nwfilter driver: %s" msgstr "보안 드라이버 시작 실패" #: src/util/virterror.c:1091 #, fuzzy msgid "Invalid network filter" msgstr "잘못된 네트워크 포인터" #: src/util/virterror.c:1093 #, fuzzy, c-format msgid "Invalid network filter: %s" msgstr "%s에 있는 잘못된 네트워크 포인터" #: src/util/virterror.c:1097 #, fuzzy msgid "Network filter not found" msgstr "네트워크를 찾을 수 없음" #: src/util/virterror.c:1099 #, fuzzy, c-format msgid "Network filter not found: %s" msgstr "네트워크를 찾을 수 없음: %s" #: src/util/virterror.c:1103 #, fuzzy msgid "Error while building firewall" msgstr "드라이버를 다시 불러오는 중 오류가 발생했습니다" #: src/util/virterror.c:1105 #, fuzzy, c-format msgid "Error while building firewall: %s" msgstr "드라이버를 다시 불러오는 중 오류가 발생했습니다" #: src/util/virterror.c:1109 msgid "unsupported configuration" msgstr "지원하지 않는 설정" #: src/util/virterror.c:1111 #, c-format msgid "unsupported configuration: %s" msgstr "지원하지 않는 설정: %s" #: src/util/virterror.c:1115 msgid "Timed out during operation" msgstr "동작 중 타임 아웃" #: src/util/virterror.c:1117 #, c-format msgid "Timed out during operation: %s" msgstr "동작 중 타임 아웃: %s" #: src/util/virterror.c:1121 msgid "Failed to make domain persistent after migration" msgstr "이전 이후 도메인을 영구적으로 만드는 데 실패" #: src/util/virterror.c:1123 #, c-format msgid "Failed to make domain persistent after migration: %s" msgstr "이전 이후 도메인을 영구적으로 만드는 데 실패: %s" #: src/util/virterror.c:1127 #, fuzzy msgid "Hook script execution failed" msgstr "작업 실패" #: src/util/virterror.c:1129 #, fuzzy, c-format msgid "Hook script execution failed: %s" msgstr "작업 실패: %s" #: src/util/virterror.c:1133 #, fuzzy msgid "Invalid snapshot" msgstr "잘못된 비밀정보" #: src/util/virterror.c:1135 #, fuzzy, c-format msgid "Invalid snapshot: %s" msgstr "잘못된 포트: %s" #: src/util/virterror.c:1139 #, fuzzy msgid "Domain snapshot not found" msgstr "도메인을 찾을 수 없음" #: src/util/virterror.c:1141 #, fuzzy, c-format msgid "Domain snapshot not found: %s" msgstr "도메인을 찾을 수 없음: %s" #: src/util/virterror.c:1145 #, fuzzy msgid "invalid stream pointer" msgstr "내부에 잘못된 저장소 볼륨 포인터" #: src/util/virterror.c:1147 #, fuzzy, c-format msgid "invalid stream pointer in %s" msgstr "%s 내부에 잘못된 인터페이스 포인터" #: src/util/virterror.c:1151 #, fuzzy msgid "argument unsupported" msgstr "비밀 저장소를 지원하지 않습니다" #: src/util/virterror.c:1153 #, fuzzy, c-format msgid "argument unsupported: %s" msgstr "vcpu 갯수가 범위를 벗어남 %d > %d" #: src/util/virterror.c:1157 msgid "revert requires force" msgstr "" #: src/util/virterror.c:1159 #, c-format msgid "revert requires force: %s" msgstr "" #: src/util/virterror.c:1163 #, fuzzy msgid "operation aborted" msgstr "작업 실패" #: src/util/virterror.c:1165 #, fuzzy, c-format msgid "operation aborted: %s" msgstr "작업 실패: %s" #: src/util/virterror.c:1169 #, fuzzy msgid "metadata not found" msgstr "도메인을 찾을 수 없음" #: src/util/virterror.c:1171 #, fuzzy, c-format msgid "metadata not found: %s" msgstr "도메인을 찾을 수 없음: %s" #: src/util/virterror.c:1175 #, fuzzy msgid "Unsafe migration" msgstr "실시간 이전" #: src/util/virterror.c:1177 #, fuzzy, c-format msgid "Unsafe migration: %s" msgstr "지원하지 않는 설정: %s" #: src/util/virterror.c:1181 #, fuzzy msgid "numerical overflow" msgstr "내부 오류" #: src/util/virterror.c:1183 #, fuzzy, c-format msgid "numerical overflow: %s" msgstr "내부 오류" #: src/util/virterror.c:1187 #, fuzzy msgid "block copy still active" msgstr "풀이 아직 동작중입니다" #: src/util/virterror.c:1189 #, fuzzy, c-format msgid "block copy still active: %s" msgstr "네트워크가 아직 실행 중" #: src/util/virterror.c:1193 #, fuzzy msgid "Operation not supported" msgstr "네트워크 유형 %d를 지원하지 않습니다" #: src/util/virterror.c:1195 #, fuzzy, c-format msgid "Operation not supported: %s" msgstr "%s 장치에 대해 이동식 미디어가 지원되지 않음" #: src/util/virterror.c:1199 msgid "SSH transport error" msgstr "" #: src/util/virterror.c:1201 #, fuzzy, c-format msgid "SSH transport error: %s" msgstr "내부 오류 %s" #: src/util/virterror.c:1205 #, fuzzy msgid "Guest agent is not responding" msgstr "도메인이 실행중이 아닙니다" #: src/util/virterror.c:1207 #, c-format msgid "Guest agent is not responding: %s" msgstr "" #: src/util/virterror_internal.h:80 #, c-format msgid "%s in %s must be NULL" msgstr "" #: src/util/virterror_internal.h:91 #, fuzzy, c-format msgid "%s in %s must not be NULL" msgstr "플래그가 0이어야 합니다" #: src/util/virterror_internal.h:102 #, c-format msgid "%s in %s must greater than zero" msgstr "" #: src/util/virterror_internal.h:113 #, fuzzy, c-format msgid "%s in %s must not be zero" msgstr "플래그가 0이어야 합니다" #: src/util/virterror_internal.h:124 #, fuzzy, c-format msgid "%s in %s must be zero" msgstr "플래그가 0이어야 합니다" #: src/util/virterror_internal.h:135 #, c-format msgid "%s in %s must be zero or greater" msgstr "" #: src/util/virtime.c:288 #, fuzzy msgid "Unable to break out time format" msgstr "파이프를 생성할 수 없" #: src/util/virtime.c:316 src/util/virtime.c:347 #, fuzzy msgid "Unable to format time" msgstr "파이프를 생성할 수 없" #: src/util/virtypedparam.c:93 #, fuzzy, c-format msgid "invalid type '%s' for parameter '%s', expected '%s'" msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #: src/util/virtypedparam.c:104 #, fuzzy, c-format msgid "parameter '%s' not supported" msgstr "비밀 저장소를 지원하지 않습니다" #: src/util/virtypedparam.c:111 #, fuzzy, c-format msgid "parameter '%s' occurs multiple times" msgstr "비밀 저장소를 지원하지 않습니다" #: src/util/virtypedparam.c:175 #, fuzzy, c-format msgid "unexpected type %d for field %s" msgstr "예기치 못한 hostdev 모드 %d" #: src/util/viruri.c:166 #, fuzzy, c-format msgid "Unable to parse URI %s" msgstr "%s를 열 수 없음" #: src/util/xml.c:78 msgid "Invalid parameter to virXPathString()" msgstr "virXPathString()으로 잘못된 매개변수 전달" #: src/util/xml.c:118 #, fuzzy, c-format msgid "'%s' value longer than %zu bytes" msgstr "'%s' 값이 virXPathStringLimit()의 %Zd보다 긺" #: src/util/xml.c:148 msgid "Invalid parameter to virXPathNumber()" msgstr "virXPathNumber()에 잘못된 매개변수 전달" #: src/util/xml.c:177 msgid "Invalid parameter to virXPathLong()" msgstr "virXPathLong()에 잘못된 매개변수 전달" #: src/util/xml.c:283 src/util/xml.c:400 msgid "Invalid parameter to virXPathULong()" msgstr "virXPathULong()에 잘못된 매개변수 전달" #: src/util/xml.c:447 msgid "Invalid parameter to virXPathLongLong()" msgstr "virXPathLongLong()에 잘못된 매개변수 전달" #: src/util/xml.c:497 msgid "Invalid parameter to virXPathBoolean()" msgstr "virXPathBoolean()에 잘못된 매개변수 전달" #: src/util/xml.c:534 msgid "Invalid parameter to virXPathNode()" msgstr "virXPathNode()에 잘못된 매개변수 전달" #: src/util/xml.c:574 msgid "Invalid parameter to virXPathNodeSet()" msgstr "virXPathNodeSet()에 잘못된 매개변수 전달" #: src/util/xml.c:589 #, fuzzy, c-format msgid "Incorrect xpath '%s'" msgstr "경로 %s를 생성할 수 없음" #: src/util/xml.c:686 #, fuzzy, c-format msgid "" "%s:%d: %s%s\n" "%s" msgstr "cd: %s: %s" #: src/util/xml.c:694 #, fuzzy, c-format msgid "" "at line %d: %s%s\n" "%s" msgstr "위치 %d: %s" #: src/util/xml.c:754 msgid "missing root element" msgstr "root 요소가 빠" #: src/util/xml.c:778 msgid "failed to parse xml document" msgstr "xml 문서 구문분석 실패" #: src/vbox/vbox_MSCOMGlue.c:355 src/vbox/vbox_MSCOMGlue.c:382 #, fuzzy, c-format msgid "Could not query registry value '%s\\%s'" msgstr "vzctl 버전을 가져올 수 없음" #: src/vbox/vbox_MSCOMGlue.c:361 #, fuzzy, c-format msgid "Registry value '%s\\%s' has unexpected type" msgstr "스트림이 예기치 못하게 종료했습니다" #: src/vbox/vbox_MSCOMGlue.c:367 #, fuzzy, c-format msgid "Registry value '%s\\%s' is too short" msgstr "스트림이 예기치 못하게 종료했습니다" #: src/vbox/vbox_MSCOMGlue.c:548 src/vbox/vbox_MSCOMGlue.c:556 #, fuzzy, c-format msgid "Could not parse IID from '%s', rc = 0x%08x" msgstr "usb 파일 %s를 구문분석 할 수 없음" #: src/vbox/vbox_MSCOMGlue.c:565 #, fuzzy, c-format msgid "Could not create VirtualBox instance, rc = 0x%08x" msgstr "가상 CPU의 갯수를 설정할 수 없음" #: src/vbox/vbox_MSCOMGlue.c:574 #, fuzzy, c-format msgid "Could not create Session instance, rc = 0x%08x" msgstr "가상 CPU의 갯수를 설정할 수 없음" #: src/vbox/vbox_XPCOMCGlue.c:100 #, fuzzy, c-format msgid "Library '%s' doesn't exist" msgstr "'%s' 명령이 존재하지 않음" #: src/vbox/vbox_XPCOMCGlue.c:145 #, fuzzy, c-format msgid "Could not dlsym %s from '%s': %s" msgstr "타입파일 '%s'를 찾을 수 없음" #: src/vbox/vbox_XPCOMCGlue.c:153 #, fuzzy, c-format msgid "Calling %s from '%s' failed" msgstr "'%s'에 대한 stat이 실패했습니다" #: src/vbox/vbox_driver.c:160 src/vbox/vbox_tmpl.c:994 msgid "no VirtualBox driver path specified (try vbox:///session)" msgstr "" "VirtualBox 드라이버 경로가 지정되지 않았음(vbox:///session을 시도해 보십시오)" #: src/vbox/vbox_driver.c:167 src/vbox/vbox_tmpl.c:1001 #, c-format msgid "unknown driver path '%s' specified (try vbox:///session)" msgstr "" "알려지지 않은 드라이버 경로 '%s'가 지정되었습니다 (vbox:///session을 시도해 " "보십시오.)" #: src/vbox/vbox_driver.c:174 src/vbox/vbox_tmpl.c:1008 #, c-format msgid "unknown driver path '%s' specified (try vbox:///system)" msgstr "" "알려지지 않은 드라이버 경로 '%s'가 지정되었습니다 (vbox:///system을 시도해 보" "십시오.)" #: src/vbox/vbox_driver.c:180 msgid "unable to initialize VirtualBox driver API" msgstr "VirtualBox 드라이버 API를 초기화할 수 없습니다" #: src/vbox/vbox_tmpl.c:901 msgid "nsIEventQueue object is null" msgstr "" #: src/vbox/vbox_tmpl.c:910 msgid "IVirtualBox object is null" msgstr "" #: src/vbox/vbox_tmpl.c:916 msgid "ISession object is null" msgstr "" #: src/vbox/vbox_tmpl.c:949 #, fuzzy msgid "Could not extract VirtualBox version" msgstr "vzctl 버전을 가져올 수 없음" #: src/vbox/vbox_tmpl.c:1125 #, c-format msgid "Could not get list of Domains, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:1162 #, fuzzy, c-format msgid "Could not get number of Domains, rc=%08x" msgstr "가상 CPU의 갯수를 설정할 수 없음" #: src/vbox/vbox_tmpl.c:1234 src/vbox/vbox_tmpl.c:1294 #: src/vbox/vbox_tmpl.c:1364 src/vbox/vbox_tmpl.c:1438 #: src/vbox/vbox_tmpl.c:1899 src/vbox/vbox_tmpl.c:3725 #, c-format msgid "Could not get list of machines, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:1503 src/vbox/vbox_tmpl.c:1528 #: src/vbox/vbox_tmpl.c:2010 src/vbox/vbox_tmpl.c:5940 #: src/vbox/vbox_tmpl.c:6042 src/vbox/vbox_tmpl.c:6147 #: src/vbox/vbox_tmpl.c:6198 src/vbox/vbox_tmpl.c:6287 #: src/vbox/vbox_tmpl.c:6319 src/vbox/vbox_tmpl.c:6361 #: src/vbox/vbox_tmpl.c:6425 src/vbox/vbox_tmpl.c:6486 #: src/vbox/vbox_tmpl.c:6546 src/vbox/vbox_tmpl.c:6690 #: src/vbox/vbox_tmpl.c:6848 #, fuzzy msgid "no domain with matching UUID" msgstr "일치하는 id의 도메인이 없음" #: src/vbox/vbox_tmpl.c:1574 #, fuzzy msgid "error while suspending the domain" msgstr "SSH 세션을 여는 중 오류 발생" #: src/vbox/vbox_tmpl.c:1580 #, fuzzy msgid "machine not in running state to suspend it" msgstr "도메인이 실행 상태가 아닙니다" #: src/vbox/vbox_tmpl.c:1626 #, fuzzy msgid "error while resuming the domain" msgstr "드라이버를 다시 불러오는 중 오류가 발생했습니다" #: src/vbox/vbox_tmpl.c:1632 msgid "machine not paused, so can't resume it" msgstr "" #: src/vbox/vbox_tmpl.c:1672 msgid "machine paused, so can't power it down" msgstr "" #: src/vbox/vbox_tmpl.c:1676 src/vbox/vbox_tmpl.c:1781 #, fuzzy msgid "machine already powered down" msgstr "감시가 이미 추적중입니다" #: src/vbox/vbox_tmpl.c:1739 #, fuzzy msgid "machine not running, so can't reboot it" msgstr "도메인이 실행 상태가 아닙니다" #: src/vbox/vbox_tmpl.c:1857 msgid "memory size can't be changed unless domain is powered down" msgstr "" #: src/vbox/vbox_tmpl.c:1873 #, c-format msgid "could not set the memory size of the domain to: %lu Kb, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:2147 #, fuzzy, c-format msgid "could not set the number of cpus of the domain to: %u, rc=%08x" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: src/vbox/vbox_tmpl.c:2158 #, fuzzy, c-format msgid "can't open session to the domain with id %d" msgstr "id %d로 시작하는 도메인 없음" #: src/vbox/vbox_tmpl.c:2811 #, c-format msgid "" "Could not generate medium name for the disk at: controller instance:%u, port:" "%d, slot:%d" msgstr "" #: src/vbox/vbox_tmpl.c:3451 #, c-format msgid "Could not get list of Defined Domains, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:3501 #, fuzzy, c-format msgid "Could not get number of Defined Domains, rc=%08x" msgstr "가상 CPU의 갯수를 설정할 수 없음" #: src/vbox/vbox_tmpl.c:3671 msgid "OpenRemoteSession/LaunchVMProcess failed, domain can't be started" msgstr "" #: src/vbox/vbox_tmpl.c:3718 #, fuzzy msgid "Error while reading the domain name" msgstr "드라이버를 다시 불러오는 중 오류가 발생했습니다" #: src/vbox/vbox_tmpl.c:3755 msgid "machine is not in poweroff|saved|aborted state, so couldn't start it" msgstr "" #: src/vbox/vbox_tmpl.c:3888 src/vbox/vbox_tmpl.c:5442 #, c-format msgid "can't get the uuid of the file to be attached to cdrom: %s, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:3895 src/vbox/vbox_tmpl.c:5451 #, c-format msgid "could not attach the file to cdrom: %s, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:3952 #, c-format msgid "can't get the uuid of the file to be attached as harddisk: %s, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:3998 #, c-format msgid "could not attach the file as harddisk: %s, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:4044 src/vbox/vbox_tmpl.c:5495 #, c-format msgid "" "can't get the uuid of the file to be attached to floppy drive: %s, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:4052 src/vbox/vbox_tmpl.c:5502 #, c-format msgid "could not attach the file to floppy drive: %s, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:4232 #, c-format msgid "" "Failed to attach the following disk/dvd/floppy to the machine: %s, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:4242 #, c-format msgid "" "can't get the uuid of the file to be attached as harddisk/dvd/floppy: %s, rc=" "%08x" msgstr "" #: src/vbox/vbox_tmpl.c:4283 #, c-format msgid "" "can't get the port/slot number of harddisk/dvd/floppy to be attached: %s, rc=" "%08x" msgstr "" #: src/vbox/vbox_tmpl.c:4306 #, c-format msgid "could not attach the file as harddisk/dvd/floppy: %s, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:5080 src/vbox/vbox_tmpl.c:5148 #, fuzzy, c-format msgid "could not define a domain, rc=%08x" msgstr "%s에서 도메인 정의하기 실패" #: src/vbox/vbox_tmpl.c:5088 #, fuzzy, c-format msgid "could not set the memory size of the domain to: %llu Kb, rc=%08x" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: src/vbox/vbox_tmpl.c:5100 #, fuzzy, c-format msgid "could not set the number of virtual CPUs to: %u, rc=%08x" msgstr "가상 CPU의 갯수를 설정할 수 없음" #: src/vbox/vbox_tmpl.c:5118 #, fuzzy, c-format msgid "could not change PAE status to: %s, rc=%08x" msgstr "CPU 온라인 상태를 변경할 수 없음" #: src/vbox/vbox_tmpl.c:5120 src/vbox/vbox_tmpl.c:5131 #: src/vbox/vbox_tmpl.c:5139 #, fuzzy msgid "Enabled" msgstr "활성화됨" #: src/vbox/vbox_tmpl.c:5120 src/vbox/vbox_tmpl.c:5131 #: src/vbox/vbox_tmpl.c:5139 #, fuzzy msgid "Disabled" msgstr "비활성화됨" #: src/vbox/vbox_tmpl.c:5129 #, fuzzy, c-format msgid "could not change ACPI status to: %s, rc=%08x" msgstr "CPU 온라인 상태를 변경할 수 없음" #: src/vbox/vbox_tmpl.c:5137 #, fuzzy, c-format msgid "could not change APIC status to: %s, rc=%08x" msgstr "CPU 온라인 상태를 변경할 수 없음" #: src/vbox/vbox_tmpl.c:5347 #, fuzzy, c-format msgid "could not delete the domain, rc=%08x" msgstr "동작중인 도메인을 삭제할 수 없음" #: src/vbox/vbox_tmpl.c:5547 #, fuzzy, c-format msgid "could not attach shared folder '%s', rc=%08x" msgstr "usb 파일 %s를 구문분석 할 수 없음" #: src/vbox/vbox_tmpl.c:5667 #, c-format msgid "could not de-attach the mounted ISO, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:5688 #, c-format msgid "could not attach the file to floppy drive, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:5723 #, fuzzy, c-format msgid "could not detach shared folder '%s', rc=%08x" msgstr "동작중인 도메인을 삭제할 수 없음" #: src/vbox/vbox_tmpl.c:5775 src/vbox/vbox_tmpl.c:6160 #, fuzzy, c-format msgid "could not get snapshot count for domain %s" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: src/vbox/vbox_tmpl.c:5795 src/vbox/vbox_tmpl.c:6221 #, fuzzy, c-format msgid "could not get root snapshot for domain %s" msgstr "도메인 %s의 메모리 통계를 얻는 데 실패했습니다" #: src/vbox/vbox_tmpl.c:5808 #, fuzzy, c-format msgid "unexpected number of snapshots < %u" msgstr "%s에 예기치 못한 이전 상태" #: src/vbox/vbox_tmpl.c:5816 src/vbox/vbox_tmpl.c:6812 #, fuzzy msgid "could not get children snapshots" msgstr "현재 시간을 얻을 수 없음" #: src/vbox/vbox_tmpl.c:5825 #, fuzzy, c-format msgid "unexpected number of snapshots > %u" msgstr "%s에 예기치 못한 이전 상태" #: src/vbox/vbox_tmpl.c:5871 src/vbox/vbox_tmpl.c:6241 #, fuzzy msgid "could not get snapshot name" msgstr "표준화된 호스트 이름을 결정할 수 없습니다" #: src/vbox/vbox_tmpl.c:5886 #, fuzzy, c-format msgid "domain %s has no snapshots with name %s" msgstr "이미 %s 도메인이 이미 uuid %s로 존재함" #: src/vbox/vbox_tmpl.c:5947 src/vbox/vbox_tmpl.c:6617 #: src/vbox/vbox_tmpl.c:6717 src/vbox/vbox_tmpl.c:6859 #, fuzzy msgid "could not get domain state" msgstr "도메인 상태를 얻는 데 실패" #: src/vbox/vbox_tmpl.c:5962 src/vbox/vbox_tmpl.c:6633 #: src/vbox/vbox_tmpl.c:6882 #, fuzzy, c-format msgid "could not open VirtualBox session with domain %s" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: src/vbox/vbox_tmpl.c:5984 src/vbox/vbox_tmpl.c:5992 #, fuzzy, c-format msgid "could not take snapshot of domain %s" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: src/vbox/vbox_tmpl.c:5999 src/vbox/vbox_tmpl.c:6709 #, fuzzy, c-format msgid "could not get current snapshot of domain %s" msgstr "현재 시간을 얻을 수 없음" #: src/vbox/vbox_tmpl.c:6056 #, fuzzy, c-format msgid "could not get description of snapshot %s" msgstr "%s상의 매체를 꺼내기할 수 없음" #: src/vbox/vbox_tmpl.c:6072 #, fuzzy, c-format msgid "could not get creation time of snapshot %s" msgstr "현재 시간을 얻을 수 없음" #: src/vbox/vbox_tmpl.c:6082 src/vbox/vbox_tmpl.c:6371 #, fuzzy, c-format msgid "could not get parent of snapshot %s" msgstr "%s에 인자를 넣을 수 없음" #: src/vbox/vbox_tmpl.c:6090 src/vbox/vbox_tmpl.c:6385 #, fuzzy, c-format msgid "could not get name of parent of snapshot %s" msgstr "%s상의 매체를 꺼내기할 수 없음" #: src/vbox/vbox_tmpl.c:6105 src/vbox/vbox_tmpl.c:6701 #, fuzzy, c-format msgid "could not get online state of snapshot %s" msgstr "CPU 온라인 상태를 변경할 수 없음" #: src/vbox/vbox_tmpl.c:6326 src/vbox/vbox_tmpl.c:6432 #: src/vbox/vbox_tmpl.c:6496 #, fuzzy msgid "could not get current snapshot" msgstr "현재 시간을 얻을 수 없음" #: src/vbox/vbox_tmpl.c:6438 #, fuzzy msgid "domain has no snapshots" msgstr "도메인이 일시 중지되지 않았습니다" #: src/vbox/vbox_tmpl.c:6445 src/vbox/vbox_tmpl.c:6507 #, fuzzy msgid "could not get current snapshot name" msgstr "현재 시간을 얻을 수 없음" #: src/vbox/vbox_tmpl.c:6576 src/vbox/vbox_tmpl.c:6763 #, fuzzy msgid "could not get snapshot UUID" msgstr "UUID를 설정할 수 없음" #: src/vbox/vbox_tmpl.c:6583 src/vbox/vbox_tmpl.c:6645 #: src/vbox/vbox_tmpl.c:6655 #, fuzzy, c-format msgid "could not restore snapshot for domain %s" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: src/vbox/vbox_tmpl.c:6610 #, fuzzy msgid "could not get domain UUID" msgstr "도메인 UUID 보기 실패 " #: src/vbox/vbox_tmpl.c:6624 #, fuzzy, c-format msgid "domain %s is already running" msgstr "도메인이 이미 실행중입니다" #: src/vbox/vbox_tmpl.c:6642 #, fuzzy msgid "cannot restore domain snapshot for running domain" msgstr "임시 도메인에 대해 autostart를 설정할 수 없음" #: src/vbox/vbox_tmpl.c:6724 #, fuzzy msgid "cannot revert snapshot of running domain" msgstr "임시 도메인에 대해 autostart를 설정할 수 없음" #: src/vbox/vbox_tmpl.c:6775 #, fuzzy msgid "cannot delete domain snapshot for running domain" msgstr "임시 도메인에 대해 autostart를 설정할 수 없음" #: src/vbox/vbox_tmpl.c:6778 src/vbox/vbox_tmpl.c:6787 #, fuzzy msgid "could not delete snapshot" msgstr "%s상의 매체를 꺼내기할 수 없음" #: src/vbox/vbox_tmpl.c:6873 #, fuzzy msgid "cannot delete snapshots of running domain" msgstr "동작중인 도메인을 삭제할 수 없음" #: src/vbox/vbox_tmpl.c:8351 #, fuzzy, c-format msgid "could not get number of volumes in the pool: %s, rc=%08x" msgstr "가상 CPU의 갯수를 설정할 수 없음" #: src/vbox/vbox_tmpl.c:8403 #, c-format msgid "could not get the volume list in the pool: %s, rc=%08x" msgstr "" #: src/vbox/vbox_tmpl.c:8485 src/vbox/vbox_tmpl.c:8716 #: src/vbox/vbox_tmpl.c:8885 src/vbox/vbox_tmpl.c:8955 #: src/vbox/vbox_tmpl.c:9062 #, fuzzy, c-format msgid "Could not parse UUID from '%s'" msgstr "usb 파일 %s를 구문분석 할 수 없음" #: src/vbox/vbox_tmpl.c:9137 #, fuzzy msgid "unable to get monitor count" msgstr "모니터 이벤트를 등록할 수 없음" #: src/vbox/vbox_tmpl.c:9144 #, c-format msgid "screen ID higher than monitor count (%d)" msgstr "" #: src/vbox/vbox_tmpl.c:9183 #, fuzzy msgid "unable to get screen resolution" msgstr "현재 시간을 얻을 수 없음" #: src/vbox/vbox_tmpl.c:9193 #, fuzzy msgid "failed to take screenshot" msgstr "경로 %s를 만드는 데 실패" #: src/vbox/vbox_tmpl.c:9199 #, fuzzy, c-format msgid "unable to write data to '%s'" msgstr "xml을 '%s'에 쓰는 데 실패" #: src/vbox/vbox_tmpl.c:9281 #, fuzzy, c-format msgid "Could not get list of domains, rc=%08x" msgstr "가상 CPU의 갯수를 설정할 수 없음" #: src/vbox/vbox_tmpl.c:9315 #, fuzzy msgid "could not get snapshot count for listed domains" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: src/vmware/vmware_conf.c:254 #, fuzzy, c-format msgid "failed to parse %s version" msgstr "XML 구문 분석에 실패" #: src/vmware/vmware_conf.c:260 #, fuzzy msgid "version parsing error" msgstr "구문 분석 오류" #: src/vmware/vmware_conf.c:305 #, c-format msgid "path '%s' doesn't reference a file" msgstr "" #: src/vmware/vmware_conf.c:421 #, fuzzy, c-format msgid "file %s does not exist" msgstr "'%s'가 존재하지 않습니다" #: src/vmware/vmware_conf.c:433 #, fuzzy, c-format msgid "failed to move file to %s " msgstr "'%s' 파일 열기 실패" #: src/vmware/vmware_conf.c:474 #, fuzzy msgid "unable to read vmware log file" msgstr "파일 %s 저장 실패" #: src/vmware/vmware_conf.c:480 #, fuzzy msgid "cannot find pid in vmware log file" msgstr "%s의 값 구문 분석 실패" #: src/vmware/vmware_conf.c:490 #, fuzzy msgid "cannot parse pid in vmware log file" msgstr "CPU 맵 파일을 구문분석할 수 없습니다: %s" #: src/vmware/vmware_driver.c:101 #, fuzzy, c-format msgid "" "unexpected VMware URI path '%s', try vmwareplayer:///session or vmwarews:///" "session" msgstr "예기치 못한 UML URI 경로 '%s', uml:///session을 시도" #: src/vmware/vmware_driver.c:114 #, fuzzy, c-format msgid "%s utility is missing" msgstr "보안 레이블이 빠졌습니다" #: src/vmware/vmware_driver.c:337 src/vmware/vmware_driver.c:608 #, fuzzy, c-format msgid "Failed to write vmx file '%s'" msgstr "'%s' 파일 읽기 실패" #: src/vmware/vmware_driver.c:438 msgid "" "vmplayer does not support libvirt suspend/resume (vmware pause/unpause) " "operation " msgstr "" #: src/vmware/vmware_driver.c:487 msgid "" "vmplayer does not support libvirt suspend/resume(vmware pause/unpause) " "operation " msgstr "" #: src/vmware/vmware_driver.c:506 #, fuzzy msgid "domain is not in suspend state" msgstr "도메인이 shutoff 상태가 아닙니다" #: src/vmx/vmx.c:609 #, c-format msgid "libxml2 doesn't handle %s encoding" msgstr "" #: src/vmx/vmx.c:618 #, fuzzy, c-format msgid "Could not convert from %s to UTF-8 encoding" msgstr "'%s'를 정수로 변환할 수 없음" #: src/vmx/vmx.c:650 src/vmx/vmx.c:666 src/vmx/vmx.c:695 src/vmx/vmx.c:711 #: src/vmx/vmx.c:741 src/vmx/vmx.c:752 src/vmx/vmx.c:790 src/vmx/vmx.c:801 #, fuzzy, c-format msgid "Missing essential config entry '%s'" msgstr "설정 디렉터리 '%s'를 만들 수 없음" #: src/vmx/vmx.c:656 src/vmx/vmx.c:702 src/vmx/vmx.c:767 src/vmx/vmx.c:818 #, fuzzy, c-format msgid "Config entry '%s' must be a string" msgstr "설정 값 %s가 스트링이 아닙니다" #: src/vmx/vmx.c:761 #, fuzzy, c-format msgid "Config entry '%s' must represent an integer value" msgstr "장치 유형 '%s'가 정수가 아닙니다" #: src/vmx/vmx.c:812 #, c-format msgid "Config entry '%s' must represent a boolean value (true|false)" msgstr "" #: src/vmx/vmx.c:834 msgid "" "Expecting domain XML attribute 'dev' of entry 'devices/disk/target' to start " "with 'sd'" msgstr "" #: src/vmx/vmx.c:843 src/vmx/vmx.c:883 src/vmx/vmx.c:918 #, fuzzy, c-format msgid "Could not parse valid disk index from '%s'" msgstr "usb 파일 %s를 구문분석 할 수 없음" #: src/vmx/vmx.c:850 #, c-format msgid "SCSI disk index (parsed from '%s') is too large" msgstr "" #: src/vmx/vmx.c:874 msgid "" "Expecting domain XML attribute 'dev' of entry 'devices/disk/target' to start " "with 'hd'" msgstr "" #: src/vmx/vmx.c:890 #, c-format msgid "IDE disk index (parsed from '%s') is too large" msgstr "" #: src/vmx/vmx.c:909 msgid "" "Expecting domain XML attribute 'dev' of entry 'devices/disk/target' to start " "with 'fd'" msgstr "" #: src/vmx/vmx.c:925 #, c-format msgid "Floppy disk index (parsed from '%s') is too large" msgstr "" #: src/vmx/vmx.c:946 #, fuzzy, c-format msgid "Unsupported disk address type '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/vmx/vmx.c:958 #, fuzzy msgid "Could not verify disk address" msgstr "소켓 주소를 얻는 데 실패" #: src/vmx/vmx.c:966 #, c-format msgid "Disk address %d:%d:%d doesn't match target device '%s'" msgstr "" #: src/vmx/vmx.c:975 src/vmx/vmx.c:1666 src/vmx/vmx.c:1899 src/vmx/vmx.c:2019 #, c-format msgid "SCSI controller index %d out of [0..3] range" msgstr "" #: src/vmx/vmx.c:982 #, c-format msgid "SCSI bus index %d out of [0] range" msgstr "" #: src/vmx/vmx.c:989 src/vmx/vmx.c:2026 #, c-format msgid "SCSI unit index %d out of [0..6,8..15] range" msgstr "" #: src/vmx/vmx.c:996 #, c-format msgid "IDE controller index %d out of [0] range" msgstr "" #: src/vmx/vmx.c:1003 src/vmx/vmx.c:2046 #, c-format msgid "IDE bus index %d out of [0..1] range" msgstr "" #: src/vmx/vmx.c:1010 src/vmx/vmx.c:2053 #, c-format msgid "IDE unit index %d out of [0..1] range" msgstr "" #: src/vmx/vmx.c:1017 src/vmx/vmx.c:2078 #, c-format msgid "FDC controller index %d out of [0] range" msgstr "" #: src/vmx/vmx.c:1024 #, c-format msgid "FDC bus index %d out of [0] range" msgstr "" #: src/vmx/vmx.c:1031 src/vmx/vmx.c:2085 #, c-format msgid "FDC unit index %d out of [0..1] range" msgstr "" #: src/vmx/vmx.c:1037 #, fuzzy, c-format msgid "Unsupported bus type '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/vmx/vmx.c:1069 #, fuzzy, c-format msgid "Unknown driver name '%s'" msgstr "알려지지 않은 소스 모드 '%s'" #: src/vmx/vmx.c:1082 #, fuzzy, c-format msgid "Missing SCSI controller for index %d" msgstr "컨트롤러 인덱스 %s를 구문 분석할 수 없습니다" #: src/vmx/vmx.c:1091 #, c-format msgid "" "Inconsistent SCSI controller model ('%s' is not '%s') for SCSI controller " "index %d" msgstr "" #: src/vmx/vmx.c:1171 #, c-format msgid "" "Disks on SCSI controller %d have inconsistent controller models, cannot " "autodetect model" msgstr "" #: src/vmx/vmx.c:1187 #, c-format msgid "" "Expecting domain XML attribute 'model' of entry 'controller' to be " "'buslogic' or 'lsilogic' or 'lsisas1068' or 'vmpvscsi' but found '%s'" msgstr "" #: src/vmx/vmx.c:1241 msgid "virVMXContext has no parseFileName function set" msgstr "" #: src/vmx/vmx.c:1294 #, c-format msgid "Expecting VMX entry 'config.version' to be 8 but found %lld" msgstr "" #: src/vmx/vmx.c:1308 #, c-format msgid "Expecting VMX entry 'virtualHW.version' to be 4, 7 or 8 but found %lld" msgstr "" #: src/vmx/vmx.c:1329 #, fuzzy msgid "VMX entry 'name' contains invalid escape sequence" msgstr "모델 이름에 잘못된 문자가 들어있습니다" #: src/vmx/vmx.c:1343 msgid "VMX entry 'annotation' contains invalid escape sequence" msgstr "" #: src/vmx/vmx.c:1356 #, c-format msgid "" "Expecting VMX entry 'memsize' to be an unsigned integer (multiple of 4) but " "found %lld" msgstr "" #: src/vmx/vmx.c:1402 #, c-format msgid "" "Expecting VMX entry 'numvcpus' to be an unsigned integer (1 or a multiple of " "2) but found %lld" msgstr "" #: src/vmx/vmx.c:1434 src/vmx/vmx.c:1462 #, c-format msgid "" "Expecting VMX entry 'sched.cpu.affinity' to be a comma separated list of " "unsigned integers but found '%s'" msgstr "" #: src/vmx/vmx.c:1442 #, c-format msgid "VMX entry 'sched.cpu.affinity' contains a %d, this value is too large" msgstr "" #: src/vmx/vmx.c:1473 #, c-format msgid "" "Expecting VMX entry 'sched.cpu.affinity' to contain at least as many values " "as 'numvcpus' (%lld) but found only %d value(s)" msgstr "" #: src/vmx/vmx.c:1497 #, c-format msgid "" "Expecting VMX entry 'sched.cpu.shares' to be an unsigned integer or 'low', " "'normal' or 'high' but found '%s'" msgstr "" #: src/vmx/vmx.c:1657 #, fuzzy msgid "Could not add controllers" msgstr "컨테이너 설정을 읽을 수 없음" #: src/vmx/vmx.c:1937 #, c-format msgid "" "Expecting VMX entry '%s' to be 'buslogic' or 'lsilogic' or 'lsisas1068' or " "'pvscsi' but found '%s'" msgstr "" #: src/vmx/vmx.c:2069 src/vmx/vmx.c:2102 #, fuzzy, c-format msgid "Unsupported bus type '%s' for device type '%s'" msgstr "지원하지 않는 데이터 타입 '%c'가 인자 '%s'에 대해 사용됨" #: src/vmx/vmx.c:2109 src/vmx/vmx.c:2284 #, fuzzy, c-format msgid "Unsupported device type '%s'" msgstr "지원하지 않는 장치 유형" #: src/vmx/vmx.c:2181 #, c-format msgid "Expecting VMX entry '%s' to be 'scsi-hardDisk' or 'disk' but found '%s'" msgstr "" #: src/vmx/vmx.c:2189 #, c-format msgid "Expecting VMX entry '%s' to be 'ata-hardDisk' or 'disk' but found '%s'" msgstr "" #: src/vmx/vmx.c:2215 src/vmx/vmx.c:2251 src/vmx/vmx.c:2279 #, c-format msgid "Invalid or not yet handled value '%s' for VMX entry '%s'" msgstr "" #: src/vmx/vmx.c:2224 #, c-format msgid "Expecting VMX entry '%s' to be 'cdrom-image' but found '%s'" msgstr "" #: src/vmx/vmx.c:2260 #, c-format msgid "Expecting VMX entry '%s' to be 'file' but found '%s'" msgstr "" #: src/vmx/vmx.c:2291 #, fuzzy, c-format msgid "Could not assign address to disk '%s'" msgstr "'%s'에 대한 부모 HBA를 찾을 수 없습니다" #: src/vmx/vmx.c:2466 src/vmx/vmx.c:3696 #, c-format msgid "Ethernet controller index %d out of [0..3] range" msgstr "" #: src/vmx/vmx.c:2525 src/vmx/vmx.c:2535 #, c-format msgid "Expecting VMX entry '%s' to be MAC address but found '%s'" msgstr "" #: src/vmx/vmx.c:2542 #, c-format msgid "" "Expecting VMX entry '%s' to be 'generated' or 'static' or 'vpx' but found " "'%s'" msgstr "" #: src/vmx/vmx.c:2559 #, c-format msgid "" "Expecting VMX entry '%s' to be 'vlance' or 'vmxnet' or 'vmxnet3' or 'e1000' " "but found '%s'" msgstr "" #: src/vmx/vmx.c:2611 #, c-format msgid "No yet handled value '%s' for VMX entry '%s'" msgstr "" #: src/vmx/vmx.c:2630 #, fuzzy, c-format msgid "Invalid value '%s' for VMX entry '%s'" msgstr "메모리 크기에 대해 %d의 잘못된 값" #: src/vmx/vmx.c:2695 src/vmx/vmx.c:3804 #, c-format msgid "Serial port index %d out of [0..3] range" msgstr "" #: src/vmx/vmx.c:2781 #, c-format msgid "VMX entry '%s' doesn't contain a port part" msgstr "" #: src/vmx/vmx.c:2818 #, fuzzy, c-format msgid "VMX entry '%s' contains unsupported scheme '%s'" msgstr "인터페이스의 유형이 지원되지 않는 '%s'입니다" #: src/vmx/vmx.c:2829 #, c-format msgid "Expecting VMX entry '%s' to be 'server' or 'client' but found '%s'" msgstr "" #: src/vmx/vmx.c:2835 #, c-format msgid "" "Expecting VMX entry '%s' to be 'device', 'file' or 'pipe' or 'network' but " "found '%s'" msgstr "" #: src/vmx/vmx.c:2892 src/vmx/vmx.c:3910 #, c-format msgid "Parallel port index %d out of [0..2] range" msgstr "" #: src/vmx/vmx.c:2954 #, c-format msgid "Expecting VMX entry '%s' to be 'device' or 'file' but found '%s'" msgstr "" #: src/vmx/vmx.c:3045 msgid "virVMXContext has no formatFileName function set" msgstr "" #: src/vmx/vmx.c:3053 #, c-format msgid "Expecting virt type to be '%s' but found '%s'" msgstr "" #: src/vmx/vmx.c:3076 #, c-format msgid "" "Expecting domain XML attribute 'arch' of entry 'os/type' to be 'i686' or " "'x86_64' but found '%s'" msgstr "" #: src/vmx/vmx.c:3089 #, fuzzy, c-format msgid "Unsupported SMBIOS mode '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/vmx/vmx.c:3153 msgid "No support for domain XML entry 'vcpu' attribute 'current'" msgstr "" #: src/vmx/vmx.c:3159 #, c-format msgid "" "Expecting domain XML entry 'vcpu' to be an unsigned integer (1 or a multiple " "of 2) but found %d" msgstr "" #: src/vmx/vmx.c:3181 #, c-format msgid "" "Expecting domain XML attribute 'cpuset' of entry 'vcpu' to contain at least " "%d CPU(s)" msgstr "" #: src/vmx/vmx.c:3229 #, fuzzy, c-format msgid "Unsupported graphics type '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/vmx/vmx.c:3286 #, fuzzy, c-format msgid "Unsupported disk device type '%s'" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/vmx/vmx.c:3328 #, fuzzy msgid "No support for multiple video devices" msgstr "macvtab 장치를 지원하지 않음" #: src/vmx/vmx.c:3456 #, fuzzy, c-format msgid "Unsupported bus type '%s' for harddisk" msgstr "잘못된 디스크 버스 유형 '%s'" #: src/vmx/vmx.c:3463 #, c-format msgid "%s harddisk '%s' has unsupported type '%s', expecting '%s'" msgstr "" #: src/vmx/vmx.c:3477 #, c-format msgid "" "Image file for %s harddisk '%s' has unsupported suffix, expecting '.vmdk'" msgstr "" #: src/vmx/vmx.c:3500 #, c-format msgid "%s harddisk '%s' has unsupported cache mode '%s'" msgstr "" #: src/vmx/vmx.c:3544 #, fuzzy, c-format msgid "Unsupported bus type '%s' for cdrom" msgstr "지원되지 않는 디스크 유형 '%s'" #: src/vmx/vmx.c:3559 #, c-format msgid "Image file for %s cdrom '%s' has unsupported suffix, expecting '.iso'" msgstr "" #: src/vmx/vmx.c:3585 #, c-format msgid "%s cdrom '%s' has unsupported type '%s', expecting '%s' or '%s'" msgstr "" #: src/vmx/vmx.c:3624 #, c-format msgid "Image file for floppy '%s' has unsupported suffix, expecting '.flp'" msgstr "" #: src/vmx/vmx.c:3649 #, c-format msgid "Floppy '%s' has unsupported type '%s', expecting '%s' or '%s'" msgstr "" #: src/vmx/vmx.c:3667 #, fuzzy, c-format msgid "Only '%s' filesystem type is supported" msgstr "오직 하나의 파일시스템만 지원됨" #: src/vmx/vmx.c:3711 #, c-format msgid "" "Expecting domain XML entry 'devices/interface/model' to be 'vlance' or " "'vmxnet' or 'vmxnet2' or 'vmxnet3' or 'e1000' but found '%s'" msgstr "" #: src/vmx/vmx.c:3753 #, fuzzy, c-format msgid "Unsupported net type '%s'" msgstr "지원하지 않는 모니터 유형 '%s'" #: src/vmx/vmx.c:3869 #, fuzzy, c-format msgid "Unsupported character device TCP protocol '%s'" msgstr "지원하지 않는 문자 장치 유형 %d" #: src/vmx/vmx.c:3887 src/vmx/vmx.c:3945 #, fuzzy, c-format msgid "Unsupported character device type '%s'" msgstr "지원하지 않는 문자 장치 유형 %d" #: src/vmx/vmx.c:3962 #, fuzzy, c-format msgid "Unsupported video device type '%s'" msgstr "지원하지 않는 장치 유형" #: src/vmx/vmx.c:3975 #, fuzzy msgid "Multi-head video devices are unsupported" msgstr "현재는 오직 하나의 비디오 카드만을 지원합니다" #: src/xen/block_stats.c:182 #, fuzzy, c-format msgid "Failed to read any block statistics for domain %d" msgstr "도메인 %s의 메모리 통계를 얻는 데 실패했습니다" #: src/xen/block_stats.c:196 #, fuzzy, c-format msgid "Frontend block device not connected for domain %d" msgstr "도메인의 장치 블럭 상태 보기" #: src/xen/block_stats.c:207 #, c-format msgid "stats->rd_bytes would overflow 64 bit counter for domain %d" msgstr "" #: src/xen/block_stats.c:216 #, c-format msgid "stats->wr_bytes would overflow 64 bit counter for domain %d" msgstr "" #: src/xen/block_stats.c:336 #, c-format msgid "" "invalid path, device names must be in the range sda[1-15] - sdiv[1-15] for " "domain %d" msgstr "" #: src/xen/block_stats.c:340 #, c-format msgid "" "invalid path, device names must be in the range hda[1-63] - hdt[1-63] for " "domain %d" msgstr "" #: src/xen/block_stats.c:344 #, c-format msgid "" "invalid path, device names must be in the range xvda[1-15] - xvdiz[1-15] for " "domain %d" msgstr "" #: src/xen/block_stats.c:348 #, c-format msgid "unsupported path, use xvdN, hdN, or sdN for domain %d" msgstr "" #: src/xen/xen_driver.c:1439 msgid "failed to get XML representation of migrated domain" msgstr "이전될 도메인의 XML 표현을 얻는 데 실패했습니다" #: src/xen/xen_driver.c:1446 msgid "failed to define domain on destination host" msgstr "대상 호스트의 도메인을 정의하는 데 실패했습니다" #: src/xen/xen_driver.c:2089 #, c-format msgid "Device %s has been assigned to guest %d" msgstr "" #: src/xen/xen_driver.c:2148 #, fuzzy msgid "Named device aliases are not supported" msgstr "설정가능한 타임존을 지원하지 않습니다." #: src/xen/xen_driver.c:2163 #, fuzzy msgid "cannot find default console device" msgstr "컨트롤러 장치를 추출할 수 없음" #: src/xen/xen_hypervisor.c:542 #, fuzzy, c-format msgid "Unable to lock %zu bytes of memory" msgstr "메모리의 킬로바이트 수" #: src/xen/xen_hypervisor.c:558 #, fuzzy, c-format msgid "Unable to unlock %zu bytes of memory" msgstr "메모리의 킬로바이트 수" #: src/xen/xen_hypervisor.c:927 src/xen/xen_hypervisor.c:966 #: src/xen/xen_hypervisor.c:1006 src/xen/xen_hypervisor.c:1046 #, fuzzy, c-format msgid "Unable to issue hypervisor ioctl %d" msgstr "하이퍼바이저 유형 보기 실패" #: src/xen/xen_hypervisor.c:1169 src/xen/xen_hypervisor.c:1250 #: src/xen/xen_hypervisor.c:1356 #, fuzzy msgid "domain or conn is NULL" msgstr "버퍼가 NULL입니다" #: src/xen/xen_hypervisor.c:1176 src/xen/xen_hypervisor.c:1257 #: src/xen/xen_hypervisor.c:1376 src/xen/xen_hypervisor.c:3370 msgid "priv->handle invalid" msgstr "" #: src/xen/xen_hypervisor.c:1192 src/xen/xen_hypervisor.c:1273 #: src/xen/xen_hypervisor.c:1392 #, fuzzy msgid "unsupported in dom interface < 5" msgstr "지원되지 않는 dom 인터페이스 < 4" #: src/xen/xen_hypervisor.c:1292 src/xen/xend_internal.c:3620 msgid "Invalid parameter count" msgstr "잘못된 매개변수 갯수" #: src/xen/xen_hypervisor.c:1327 src/xen/xen_hypervisor.c:1455 #, fuzzy, c-format msgid "Unknown scheduler %d" msgstr "알려지지 않은 스케줄러" #: src/xen/xen_hypervisor.c:1431 #, c-format msgid "Credit scheduler weight parameter (%d) is out of range (1-65535)" msgstr "크레딧 스케줄러의 weight 매개 변수 (%d) 범위 (1-65535) 초과" #: src/xen/xen_hypervisor.c:1440 #, fuzzy, c-format msgid "Credit scheduler cap parameter (%d) is out of range (0-65534)" msgstr "크레딧 스케줄러의 cap 매개 변수 (%d) 범위 (0-65535) 초과" #: src/xen/xen_hypervisor.c:1482 #, fuzzy msgid "block statistics not supported on this platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: src/xen/xen_hypervisor.c:1507 msgid "invalid path, should be vif.." msgstr "" #: src/xen/xen_hypervisor.c:1512 msgid "invalid path, vif should match this domain ID" msgstr "" #: src/xen/xen_hypervisor.c:2069 src/xen/xen_hypervisor.c:2173 #, fuzzy, c-format msgid "Unable to issue hypervisor ioctl %lu" msgstr "위치 %lld로 %s에서 이동할 수 없음" #: src/xen/xen_hypervisor.c:2456 msgid "could not read CPU flags" msgstr "CPU 플래그를 읽을 수 없음" #: src/xen/xen_hypervisor.c:2737 src/xen/xen_hypervisor.c:2748 #, c-format msgid "cannot read file %s" msgstr "%s 파일을 읽을 수 없음" #: src/xen/xen_hypervisor.c:2920 src/xen/xen_hypervisor.c:3612 msgid "domain shut off or invalid" msgstr "도메인이 종료되었거나 바르지 않음" #: src/xen/xen_hypervisor.c:2928 msgid "unsupported in dom interface < 4" msgstr "지원되지 않는 dom 인터페이스 < 4" #: src/xen/xen_hypervisor.c:2936 src/xen/xen_hypervisor.c:2942 #: src/xen/xen_hypervisor.c:3627 msgid "cannot get domain details" msgstr "도메인 상세 정보를 얻을 수 없음" #: src/xen/xen_hypervisor.c:3349 #, fuzzy msgid "cannot determine actual number of cells" msgstr "기본 비디오 유형을 결정할 수 없음" #: src/xen/xen_hypervisor.c:3364 #, fuzzy msgid "unsupported in sys interface < 4" msgstr "지원되지 않는 dom 인터페이스 < 4" #: src/xen/xen_hypervisor.c:3644 src/xen/xen_hypervisor.c:3652 msgid "cannot get VCPUs info" msgstr "VCPU 정보를 얻을 수 없음" #: src/xen/xen_inotify.c:91 src/xen/xen_inotify.c:168 #, c-format msgid "parsing uuid %s" msgstr "uuid %s를 구문 분석 중" #: src/xen/xen_inotify.c:116 msgid "finding dom on config list" msgstr "설정 파일에서 dom을 찾는 중" #: src/xen/xen_inotify.c:204 msgid "Error looking up domain" msgstr "도메인 검색 오류" #: src/xen/xen_inotify.c:211 src/xen/xen_inotify.c:304 #: src/xen/xen_inotify.c:311 msgid "Error adding file to config cache" msgstr "파을을 설정 캐시에 넣는 중 오류" #: src/xen/xen_inotify.c:257 msgid "conn, or private data is NULL" msgstr "연결 또는 비밀 데이터가 NULL입니다" #: src/xen/xen_inotify.c:300 src/xen/xen_inotify.c:323 msgid "looking up dom" msgstr "도메인을 검색중" #: src/xen/xen_inotify.c:370 #, c-format msgid "cannot open directory: %s" msgstr "디렉터리를 열 수 없음: %s" #: src/xen/xen_inotify.c:386 msgid "Error adding file to config list" msgstr "설정 목록에 파일을 추가하는 중 오류" #: src/xen/xen_inotify.c:399 msgid "initializing inotify" msgstr "inotify 초기화 중" #: src/xen/xen_inotify.c:410 #, c-format msgid "adding watch on %s" msgstr "%s에 감시 추가" #: src/xen/xend_internal.c:87 msgid "failed to create a socket" msgstr "소켓 생성 실패" #: src/xen/xend_internal.c:107 msgid "failed to connect to xend" msgstr "xend에 연결하기 실패" #: src/xen/xend_internal.c:154 msgid "failed to read from Xen Daemon" msgstr "Xen 데몬에서 읽기 실패" #: src/xen/xend_internal.c:157 msgid "failed to write to Xen Daemon" msgstr "Xen 데몬에 쓰기 실패" #: src/xen/xend_internal.c:301 #, c-format msgid "Xend returned HTTP Content-Length of %d, which exceeds maximum of %d" msgstr "" #: src/xen/xend_internal.c:361 #, c-format msgid "%d status from xen daemon: %s:%s" msgstr "xen 데몬으로부터 %d 상태 : %s:%s" #: src/xen/xend_internal.c:409 src/xen/xend_internal.c:412 #: src/xen/xend_internal.c:421 #, c-format msgid "xend_post: error from xen daemon: %s" msgstr "xen_post: xen 데몬으로부터 오류: %s" #: src/xen/xend_internal.c:456 #, fuzzy, c-format msgid "Unexpected HTTP error code %d" msgstr "예기치 못한 비디오 모델 %d" #: src/xen/xend_internal.c:676 #, c-format msgid "unable to resolve hostname '%s': %s" msgstr "호스트명 '%s'를 찾을 수 없음: %s" #: src/xen/xend_internal.c:713 #, c-format msgid "unable to connect to '%s:%s'" msgstr "'%s:%s'에 연결할 수 없음" #: src/xen/xend_internal.c:850 msgid "domain information incomplete, missing domid" msgstr "도메인 정보가 완료되지 않음, domid 부재" #: src/xen/xend_internal.c:856 msgid "domain information incorrect domid not numeric" msgstr "도메인 정보가 수치가 아닌 잘못된 domid임" #: src/xen/xend_internal.c:861 src/xen/xend_internal.c:913 msgid "domain information incomplete, missing uuid" msgstr "도메인 정보가 완료되지 않음, uuid 부재" #: src/xen/xend_internal.c:900 src/xenxs/xen_sxpr.c:1151 #: src/xenxs/xen_sxpr.c:1158 msgid "domain information incomplete, missing name" msgstr "도메인 정보가 완료되지 않음, 이름 부재" #: src/xen/xend_internal.c:1176 msgid "topology syntax error" msgstr "토폴로지 구문 오류" #: src/xen/xend_internal.c:1239 msgid "failed to parse Xend domain information" msgstr "Xend 도메인 정보 분석 실패" #: src/xen/xend_internal.c:1364 src/xen/xend_internal.c:1390 #: src/xen/xend_internal.c:1417 src/xen/xend_internal.c:1447 #: src/xen/xend_internal.c:1484 src/xen/xend_internal.c:1560 #: src/xen/xend_internal.c:1598 #, c-format msgid "Domain %s isn't running." msgstr "도메인 %s가 실행중이 아닙니다." #: src/xen/xend_internal.c:2198 src/xen/xend_internal.c:2663 #: src/xen/xend_internal.c:2673 src/xen/xend_internal.c:2831 #: src/xen/xend_internal.c:2841 src/xen/xend_internal.c:2944 #: src/xen/xend_internal.c:2954 #, fuzzy msgid "Xend version does not support modifying persistent config" msgstr "Xend 버전이 영구적인 설정을 변경하는 것을 지원하지 않습니다" #: src/xen/xend_internal.c:2205 #, fuzzy msgid "domain not running" msgstr "도메인이 실행중이 아닙니다" #: src/xen/xend_internal.c:2212 src/xen/xend_internal.c:2684 #: src/xen/xend_internal.c:2852 src/xen/xend_internal.c:2965 #, fuzzy msgid "Xend only supports modifying both live and persistent config" msgstr "Xend만 라이브와 영구 설정을 모두 변경하는 것을 허용합니다" #: src/xen/xend_internal.c:2312 #, fuzzy msgid "failed to add vcpupin xml entry" msgstr "xml 문서 구문분석 실패" #: src/xen/xend_internal.c:2360 src/xen/xm_internal.c:791 #, fuzzy msgid "domain not active" msgstr "도메인 상태" #: src/xen/xend_internal.c:2657 src/xen/xend_internal.c:2825 #: src/xen/xend_internal.c:2938 msgid "Cannot modify live config if domain is inactive" msgstr "도메인이 실행중이 아니면 라이브 설정을 변경할 수 없습니다" #: src/xen/xend_internal.c:2752 src/xen/xend_internal.c:2759 #: src/xen/xend_internal.c:2880 src/xen/xend_internal.c:2991 msgid "unsupported device type" msgstr "지원하지 않는 장치 유형" #: src/xen/xend_internal.c:2772 #, fuzzy, c-format msgid "target '%s' already exists" msgstr "타겟 %s가 이미 존재합니다" #: src/xen/xend_internal.c:2888 #, fuzzy msgid "requested device does not exist" msgstr "인터페이스 %s가 존재하지 않습니다" #: src/xen/xend_internal.c:3035 msgid "xenDaemonGetAutostart failed to find this domain" msgstr "xenDaemonGetAutostart가 이 도메인을 찾는 데 실패했습니다" #: src/xen/xend_internal.c:3075 msgid "xenDaemonSetAutostart failed to find this domain" msgstr "xenDaemonSetAutostart가 이 도메인을 찾는 데 실패했습니다" #: src/xen/xend_internal.c:3085 msgid "unexpected value from on_xend_start" msgstr "on_xend_start에 예기치 못한 값" #: src/xen/xend_internal.c:3100 msgid "sexpr2string failed" msgstr "sexpr2string 실패" #: src/xen/xend_internal.c:3113 msgid "Failed to redefine sexpr" msgstr "sexpr을 재정의하는 데 실패" #: src/xen/xend_internal.c:3118 msgid "on_xend_start not present in sexpr" msgstr "sexpr에 on_xend_start이 없음" #: src/xen/xend_internal.c:3181 msgid "" "xenDaemonDomainMigrate: Xen does not support renaming domains during " "migration" msgstr "" "xenDaemonDomainMigrate: Xen은 이전중에 도메인 이름 변경을 지원하지 않습니다" #: src/xen/xend_internal.c:3191 msgid "" "xenDaemonDomainMigrate: Xen does not support bandwidth limits during " "migration" msgstr "" "xenDaemonDomainMigrate: Xen은 이전하는 동안의 대역폭 제한을 지원하지 않습니다" #: src/xen/xend_internal.c:3219 msgid "xenDaemonDomainMigrate: xend cannot migrate paused domains" msgstr "xenDaemonDomainMigrate: xend은 일시정지된 도메인을 이전할 수 없습니다" #: src/xen/xend_internal.c:3227 msgid "xenDaemonDomainMigrate: unsupported flag" msgstr "xenDaemonDomainMigrate: 지원하지 않는 플래그" #: src/xen/xend_internal.c:3243 msgid "xenDaemonDomainMigrate: only xenmigr:// migrations are supported by Xen" msgstr "xenDaemonDomainMigrate: xenmigr:// 이전 만 Xen이 지원하고 있습니다" #: src/xen/xend_internal.c:3250 msgid "xenDaemonDomainMigrate: a hostname must be specified in the URI" msgstr "xenDaemonDomainMigrate: URI에서 호스트명이 지정되어야만 합니다" #: src/xen/xend_internal.c:3270 msgid "xenDaemonDomainMigrate: invalid port number" msgstr "xenDaemonDomainMigrate: 잘못된 포트 번호" #: src/xen/xend_internal.c:3336 msgid "failed to parse domain description" msgstr "도메인 설명 구문 분석 실패" #: src/xen/xend_internal.c:3342 msgid "failed to build sexpr" msgstr "sexpr 구축 실패" #: src/xen/xend_internal.c:3350 #, fuzzy, c-format msgid "Failed to create inactive domain %s" msgstr "비활성화 도메인 %s 생성 실패\n" #: src/xen/xend_internal.c:3526 src/xen/xend_internal.c:3599 #: src/xen/xend_internal.c:3707 msgid "unsupported in xendConfigVersion < 4" msgstr "xendConfigVersion < 4 에서는 지원하지 않습니다" #: src/xen/xend_internal.c:3538 msgid "node information incomplete, missing scheduler name" msgstr "노드 정보가 불완전합니다, 스케줄러 이름이 빠졌습니다" #: src/xen/xend_internal.c:3558 src/xen/xend_internal.c:3667 #: src/xen/xend_internal.c:3777 msgid "Unknown scheduler" msgstr "알려지지 않은 스케줄러" #: src/xen/xend_internal.c:3612 src/xen/xend_internal.c:3720 msgid "Failed to get a scheduler name" msgstr "스케줄러 이름을 얻는 데 실패" #: src/xen/xend_internal.c:3631 src/xen/xend_internal.c:3756 msgid "domain information incomplete, missing cpu_weight" msgstr "도메인 정보가 완전하지 않음, cpu_weight가 빠짐" #: src/xen/xend_internal.c:3636 src/xen/xend_internal.c:3765 msgid "domain information incomplete, missing cpu_cap" msgstr "도메인 정보가 완전하지 않음, cpu_cap이 빠짐" #: src/xen/xend_internal.c:3643 #, c-format msgid "Weight %s too big for destination" msgstr "웨이트 %s가 목적지로는 너무 큽니다" #: src/xen/xend_internal.c:3654 #, c-format msgid "Cap %s too big for destination" msgstr "캡 %s가 목적지로는 너무 큽니다" #: src/xen/xend_internal.c:3826 msgid "domainBlockPeek is not supported for dom0" msgstr "dom0에 대해 domainBlockPeek가 지원되지 않습니다" #: src/xen/xend_internal.c:3847 #, c-format msgid "%s: invalid path" msgstr "%s: 잘못된 경로" #: src/xen/xend_internal.c:3856 #, c-format msgid "failed to open for reading: %s" msgstr "읽기 용으로 열기 실패: %s" #: src/xen/xend_internal.c:3868 #, c-format msgid "failed to lseek or read from file: %s" msgstr "파일에서 읽거나 lseek하는 데 실패했습니다: %s" #: src/xen/xend_internal.c:4009 msgid "hotplug of device type not supported" msgstr "장치 유형의 핫플러그가 지원되지 않음" #: src/xen/xm_internal.c:217 #, c-format msgid "cannot stat: %s" msgstr "stat할 수 없음: %s" #: src/xen/xm_internal.c:281 msgid "xenXMConfigCacheRefresh: virHashAddEntry" msgstr "xenXMConfigCacheRefresh: virHashAddEntry" #: src/xen/xm_internal.c:322 msgid "cannot get time of day" msgstr "시간을 가져올 수 없음" #: src/xen/xm_internal.c:335 #, c-format msgid "cannot read directory %s" msgstr "디렉터리 %s를 읽을 수 없음" #: src/xen/xm_internal.c:844 msgid "read only connection" msgstr "읽기 전용 연결" #: src/xen/xm_internal.c:849 msgid "not inactive domain" msgstr "비활성화 도메인이 아님" #: src/xen/xm_internal.c:857 msgid "virHashLookup" msgstr "virHashLookup" #: src/xen/xm_internal.c:862 msgid "can't retrieve config file for domain" msgstr "도메인에 대한 설정 파일을 읽어올 수 없습니다." #: src/xen/xm_internal.c:1129 msgid "can't retrieve config filename for domain to overwrite" msgstr "덮어쓸 도메인에 대한 설정 파일 이름을 가져올 수 없습니다" #: src/xen/xm_internal.c:1135 msgid "can't retrieve config entry for domain to overwrite" msgstr "덮어쓸 도메인에 대한 설정 항목을 가져올 수 없습니다" #: src/xen/xm_internal.c:1142 src/xen/xm_internal.c:1149 msgid "failed to remove old domain from config map" msgstr "설정 맵에서 오래된 도메인을 삭제하는 데 실패했습니다" #: src/xen/xm_internal.c:1169 msgid "unable to get current time" msgstr "현재 시간을 얻을 수 없음" #: src/xen/xm_internal.c:1181 src/xen/xm_internal.c:1188 msgid "unable to store config file handle" msgstr "설정 파일 핸들을 저장하는 데 실패했습니다." #: src/xen/xm_internal.c:1394 src/xen/xm_internal.c:1491 #, fuzzy msgid "Xm driver only supports modifying persistent config" msgstr "Xend 버전이 영구적인 설정을 변경하는 것을 지원하지 않습니다" #: src/xen/xm_internal.c:1436 msgid "Xm driver only supports adding disk or network devices" msgstr "" #: src/xen/xm_internal.c:1574 msgid "block peeking not implemented" msgstr "" #: src/xen/xm_internal.c:1609 #, c-format msgid "cannot check link %s points to config %s" msgstr "링크 %s가 설정 %s를 가리키고 있는지 체크할 수 없습니다" #: src/xen/xm_internal.c:1638 #, c-format msgid "failed to create link %s to %s" msgstr "링크 %s를 %s에 대해 생성하는 데 실패" #: src/xen/xm_internal.c:1646 #, c-format msgid "failed to remove link %s" msgstr "링크 제거 실패: %s" #: src/xen/xs_internal.c:266 msgid "failed to connect to Xen Store" msgstr "Xen Store에 연결 실패" #: src/xen/xs_internal.c:290 msgid "adding watch @releaseDomain" msgstr "@releaseDomain에 감시 추가 중" #: src/xen/xs_internal.c:299 msgid "adding watch @introduceDomain" msgstr "@introduceDomain에 감시 추가 중" #: src/xen/xs_internal.c:1171 msgid "watch already tracked" msgstr "감시가 이미 추적중입니다" #: src/xenapi/xenapi_driver.c:117 #, fuzzy msgid "Server name not in URI" msgstr "phyp:// URI에 서버 이름이 빠짐" #: src/xenapi/xenapi_driver.c:123 #, fuzzy msgid "Authentication Credentials not found" msgstr "인증이 실패했습니다" #: src/xenapi/xenapi_driver.c:167 #, fuzzy msgid "Capabilities not found" msgstr "기능" #: src/xenapi/xenapi_driver.c:189 #, fuzzy msgid "Failed to allocate xen session" msgstr "메모리 할당 실패" #: src/xenapi/xenapi_driver.c:316 #, fuzzy msgid "Couldn't parse version info" msgstr "버전 번호 %s를 구문 분석할 수 없음" #: src/xenapi/xenapi_driver.c:324 #, fuzzy msgid "Couldn't get version info" msgstr "vzctl 버전을 가져올 수 없음" #: src/xenapi/xenapi_driver.c:393 #, fuzzy msgid "Unable to get host metric Information" msgstr "인터페이스 정보 보기 실패" #: src/xenapi/xenapi_driver.c:415 #, fuzzy msgid "Unable to get Host CPU set" msgstr "%s에 대한 cgroup을 얻을 수 없음" #: src/xenapi/xenapi_driver.c:436 #, fuzzy msgid "Capabilities not available" msgstr "cpu 친밀도(affinity)를 사용할 수 없습니다" #: src/xenapi/xenapi_driver.c:466 msgid "DomainID can't fit in 32 bits" msgstr "" #: src/xenapi/xenapi_driver.c:542 #, fuzzy msgid "Domain Pointer is invalid" msgstr "도메인이 종료되었거나 바르지 않음" #: src/xenapi/xenapi_driver.c:595 src/xenapi/xenapi_driver.c:637 #, fuzzy msgid "Domain Pointer not valid" msgstr "도메인이 일시 중지되지 않았습니다" #: src/xenapi/xenapi_driver.c:672 src/xenapi/xenapi_driver.c:719 #: src/xenapi/xenapi_driver.c:754 src/xenapi/xenapi_driver.c:792 #: src/xenapi/xenapi_driver.c:836 src/xenapi/xenapi_driver.c:879 #: src/xenapi/xenapi_driver.c:927 src/xenapi/xenapi_driver.c:962 #: src/xenapi/xenapi_driver.c:993 src/xenapi/xenapi_driver.c:1030 #: src/xenapi/xenapi_driver.c:1085 src/xenapi/xenapi_driver.c:1129 #: src/xenapi/xenapi_driver.c:1173 src/xenapi/xenapi_driver.c:1240 #: src/xenapi/xenapi_driver.c:1299 src/xenapi/xenapi_driver.c:1357 #: src/xenapi/xenapi_driver.c:1631 src/xenapi/xenapi_driver.c:1727 #: src/xenapi/xenapi_driver.c:1769 src/xenapi/xenapi_driver.c:1815 #, fuzzy msgid "Domain name is not unique" msgstr "도메인이 실행중이 아님" #: src/xenapi/xenapi_driver.c:693 #, fuzzy msgid "Couldn't get the Domain Pointer" msgstr "컨테이너에 대한 eth 이름을 생성할 수 없음" #: src/xenapi/xenapi_driver.c:1224 #, fuzzy msgid "Couldn't fetch Domain Information" msgstr "도메인 정보" #: src/xenapi/xenapi_driver.c:1229 #, fuzzy msgid "Couldn't fetch Node Information" msgstr "노드 정보 보기 실패" #: src/xenapi/xenapi_driver.c:1513 #, fuzzy msgid "Unable to parse given mac address" msgstr "mac 주소 '%s' 구문 분석할 수 없습니다" #: src/xenapi/xenapi_driver.c:1565 #, fuzzy msgid "Couldn't get VM record" msgstr "디렉터리 %s를 열 수 없음" #: src/xenapi/xenapi_driver.c:1692 #, fuzzy msgid "Couldn't get VM information from XML" msgstr "XML로 된 볼륨 정보" #: src/xenapi/xenapi_driver.c:1866 #, fuzzy msgid "Couldn't get host metrics - memory information" msgstr "인터페이스 정보 보기 실패" #: src/xenapi/xenapi_driver.c:1872 #, fuzzy msgid "Couldn't get host metrics" msgstr "현재 시간을 얻을 수 없음" #: src/xenapi/xenapi_utils.c:109 msgid "Query parameter 'no_verify' has unexpected value (should be 0 or 1)" msgstr "" #: src/xenxs/xen_sxpr.c:60 src/xenxs/xen_sxpr.c:1138 msgid "domain information incomplete, missing id" msgstr "도메인 정보가 완료되지 않음, id 없음" #: src/xenxs/xen_sxpr.c:97 msgid "domain information incomplete, missing HVM loader" msgstr "도메인 정보가 완료되지 않음, HVM 로더가 빠짐" #: src/xenxs/xen_sxpr.c:157 msgid "domain information incomplete, missing kernel & bootloader" msgstr "도메인 정보가 완료되지 않음, 커널 & 부트로더 부재" #: src/xenxs/xen_sxpr.c:208 #, c-format msgid "unknown chr device type '%s'" msgstr "알려지지 않은 문자 장치 유형 '%s'" #: src/xenxs/xen_sxpr.c:234 src/xenxs/xen_sxpr.c:264 src/xenxs/xen_sxpr.c:282 msgid "malformed char device string" msgstr "잘못된 형식의 문자 장치 문자열" #: src/xenxs/xen_sxpr.c:386 msgid "domain information incomplete, vbd has no dev" msgstr "도메인 정보가 완료되지 않음, vbd는 dev가 없음" #: src/xenxs/xen_sxpr.c:397 msgid "domain information incomplete, vbd has no src" msgstr "도메인 정보가 완료되지 않음, vbd는 src가 없음" #: src/xenxs/xen_sxpr.c:406 msgid "cannot parse vbd filename, missing driver name" msgstr "vbd 파일명을 구문 분석할 수 없음, 드라이버명 부재" #: src/xenxs/xen_sxpr.c:420 src/xenxs/xen_xm.c:552 #, c-format msgid "Driver name %s too big for destination" msgstr "드라이버 이름 %s가 목적지에 대해 너무 큼" #: src/xenxs/xen_sxpr.c:433 msgid "cannot parse vbd filename, missing driver type" msgstr "vbd 파일명을 구문 분석할 수 없음, 드라이버 유형 부재" #: src/xenxs/xen_sxpr.c:442 src/xenxs/xen_xm.c:573 #, c-format msgid "Driver type %s too big for destination" msgstr "드라이버 유형 %s가 목적지에 대해 너무 큼" #: src/xenxs/xen_sxpr.c:605 src/xenxs/xen_xm.c:751 #, c-format msgid "malformed mac address '%s'" msgstr "잘못된 MAC 주소 '%s'" #: src/xenxs/xen_sxpr.c:692 #, c-format msgid "Sound model %s too big for destination" msgstr "사운드 모델 %s가 목적지에 대해 너무 큼" #: src/xenxs/xen_sxpr.c:914 #, c-format msgid "unknown graphics type '%s'" msgstr "알려지지 않은 그래픽스 유형 '%s'" #: src/xenxs/xen_sxpr.c:1039 msgid "missing PCI domain" msgstr "PCI 도메인 빠짐" #: src/xenxs/xen_sxpr.c:1044 msgid "missing PCI bus" msgstr "PCI 버스 빠짐" #: src/xenxs/xen_sxpr.c:1049 msgid "missing PCI slot" msgstr "PCI 슬롯 빠짐" #: src/xenxs/xen_sxpr.c:1054 msgid "missing PCI func" msgstr "PCI 기능 빠짐" #: src/xenxs/xen_sxpr.c:1060 #, c-format msgid "cannot parse PCI domain '%s'" msgstr "PCI 도메인 '%s'를 구문분석 할 수 없음" #: src/xenxs/xen_sxpr.c:1065 #, c-format msgid "cannot parse PCI bus '%s'" msgstr "PCI 버스 '%s'를 구문분석 할 수 없음" #: src/xenxs/xen_sxpr.c:1070 #, c-format msgid "cannot parse PCI slot '%s'" msgstr "PCI 슬롯 '%s'를 구문분석 할 수 없음" #: src/xenxs/xen_sxpr.c:1075 #, c-format msgid "cannot parse PCI func '%s'" msgstr "PCI 기능 '%s'를 구문분석 할 수 없음" #: src/xenxs/xen_sxpr.c:1209 #, c-format msgid "invalid CPU mask %s" msgstr "잘못된 CPU 마스크 %s" #: src/xenxs/xen_sxpr.c:1223 src/xenxs/xen_sxpr.c:1233 #: src/xenxs/xen_sxpr.c:1243 #, c-format msgid "unknown lifecycle type %s" msgstr "알려지지 않은 생명주기 유형 %s" #: src/xenxs/xen_sxpr.c:1269 src/xenxs/xen_sxpr.c:1311 #, fuzzy, c-format msgid "unknown localtime offset %s" msgstr "알려지지 않은 클럭 오프셋 '%s'" #: src/xenxs/xen_sxpr.c:1579 src/xenxs/xen_sxpr.c:1638 #, c-format msgid "unexpected graphics type %d" msgstr "예기치 못한 그래픽스 유형 %d" #: src/xenxs/xen_sxpr.c:1748 #, fuzzy, c-format msgid "unsupported chr device type '%s'" msgstr "지원하지 않는 문자 장치 유형 %d" #: src/xenxs/xen_sxpr.c:1787 #, c-format msgid "Cannot directly attach floppy %s" msgstr "플로피 %s를 직접 부착할 수 없음" #: src/xenxs/xen_sxpr.c:1799 #, c-format msgid "Cannot directly attach CDROM %s" msgstr "직접 CDROM %s를 부착할 수 없음" #: src/xenxs/xen_sxpr.c:1859 src/xenxs/xen_xm.c:1227 #, c-format msgid "unsupported disk type %s" msgstr "지원되지 않는 디스크 유형 %s" #: src/xenxs/xen_sxpr.c:1916 src/xenxs/xen_xm.c:1377 #, c-format msgid "unsupported network type %d" msgstr "지원되지 않는 네트워크 유형 %d" #: src/xenxs/xen_sxpr.c:1965 src/xenxs/xen_xm.c:1365 #, c-format msgid "network %s is not active" msgstr "네트워크 %s가 실행중이 아님" #: src/xenxs/xen_sxpr.c:2067 src/xenxs/xen_sxpr.c:2127 msgid "managed PCI devices not supported with XenD" msgstr "XenD에서는 관리된 PCI 장치를 지원하지 않습니다" #: src/xenxs/xen_sxpr.c:2274 src/xenxs/xen_sxpr.c:2281 #: src/xenxs/xen_sxpr.c:2288 #, c-format msgid "unexpected lifecycle value %d" msgstr "예기치 못한 생명주기 값 %d" #: src/xenxs/xen_sxpr.c:2306 msgid "no HVM domain loader" msgstr "HVM 도메인 로더 없음" #: src/xenxs/xen_sxpr.c:2496 src/xenxs/xen_sxpr.c:2536 #: src/xenxs/xen_sxpr.c:2552 src/xenxs/xen_xm.c:1678 src/xenxs/xen_xm.c:1711 #: src/xenxs/xen_xm.c:1728 #, fuzzy, c-format msgid "unsupported clock offset='%s'" msgstr "지원하지 않는 클럭 오프셋 '%s'" #: src/xenxs/xen_sxpr.c:2519 src/xenxs/xen_sxpr.c:2528 src/xenxs/xen_xm.c:1694 #: src/xenxs/xen_xm.c:1703 #, fuzzy msgid "unsupported clock adjustment='reset'" msgstr "지원하지 않는 클럭 오프셋 '%s'" #: src/xenxs/xen_xm.c:60 src/xenxs/xen_xm.c:87 src/xenxs/xen_xm.c:92 #: src/xenxs/xen_xm.c:119 src/xenxs/xen_xm.c:124 src/xenxs/xen_xm.c:146 #, c-format msgid "config value %s was malformed" msgstr "설정 값 %s가 형식이 잘못됨" #: src/xenxs/xen_xm.c:167 src/xenxs/xen_xm.c:180 #, c-format msgid "config value %s was missing" msgstr "설정 값 %s가 빠졌습니다" #: src/xenxs/xen_xm.c:173 #, c-format msgid "config value %s was not a string" msgstr "설정 값 %s가 스트링이 아닙니다" #: src/xenxs/xen_xm.c:212 #, fuzzy msgid "Arguments must be non null" msgstr "내부 버퍼가 너무 작습니다" #: src/xenxs/xen_xm.c:228 #, fuzzy, c-format msgid "config value %s not a string" msgstr "설정 값 %s가 스트링이 아닙니다" #: src/xenxs/xen_xm.c:234 #, fuzzy, c-format msgid "%s can't be empty" msgstr "플래그가 0이어야 합니다" #: src/xenxs/xen_xm.c:240 #, fuzzy, c-format msgid "%s not parseable" msgstr "usb 파일 %s를 구문분석 할 수 없음" #: src/xenxs/xen_xm.c:387 #, c-format msgid "unexpected value %s for on_poweroff" msgstr "on_poweroff에 대해 예기치 못한 %s 값" #: src/xenxs/xen_xm.c:395 #, c-format msgid "unexpected value %s for on_reboot" msgstr "on_reboot에 대해 예기치 못한 값 %s" #: src/xenxs/xen_xm.c:403 #, c-format msgid "unexpected value %s for on_crash" msgstr "on_crash에 대해 예기치 못한 값 %s" #: src/xenxs/xen_xm.c:517 #, c-format msgid "Source file %s too big for destination" msgstr "소스 파일 %s가 목적지에 대해 너무 큼" #: src/xenxs/xen_xm.c:536 #, c-format msgid "Dest file %s too big for destination" msgstr "목적 파일 %s가 목적지에 대해 너무 큼" #: src/xenxs/xen_xm.c:689 #, c-format msgid "MAC address %s too big for destination" msgstr "MAC 주소 %s가 목적지에 대해 너무 긺" #: src/xenxs/xen_xm.c:697 #, c-format msgid "Bridge %s too big for destination" msgstr "브리지 %s가 목적지에 대해 너무 큼" #: src/xenxs/xen_xm.c:718 #, c-format msgid "Type %s too big for destination" msgstr "유형 %s가 목적지로는 너무 큼" #: src/xenxs/xen_xm.c:725 #, c-format msgid "Vifname %s too big for destination" msgstr "Vifname %s가 목적지로는 너무 큼" #: src/xenxs/xen_xm.c:733 #, c-format msgid "IP %s too big for destination" msgstr "IP %s가 목적지로는 너무 큼" #: src/xenxs/xen_xm.c:831 #, c-format msgid "Domain %s too big for destination" msgstr "도메인 %s가 목적지로는 너무 큼" #: src/xenxs/xen_xm.c:841 #, c-format msgid "Bus %s too big for destination" msgstr "버스 %s가 목적지로는 너무 큼" #: src/xenxs/xen_xm.c:851 #, c-format msgid "Slot %s too big for destination" msgstr "슬롯 %s가 목적지로는 너무 큼" #: src/xenxs/xen_xm.c:861 #, c-format msgid "Function %s too big for destination" msgstr "기능 %s가 목적지로는 너무 큼" #: src/xenxs/xen_xm.c:987 #, c-format msgid "VFB %s too big for destination" msgstr "VFB %s가 목적지로는 너무 큼" #: src/xenxs/xen_xm.c:1166 #, fuzzy, c-format msgid "failed to store %lld to %s" msgstr "'%s' 파일 열기 실패" #: src/xenxs/xen_xm.c:1740 src/xenxs/xen_xm.c:1749 src/xenxs/xen_xm.c:1758 #, c-format msgid "unexpected lifecycle action %d" msgstr "예기치 못한 않은 생명주기 동작 %d" #: tools/console.c:307 #, c-format msgid "unable to get tty attributes: %s" msgstr "tty 특성을 얻는 데 실패: %s" #: tools/console.c:317 #, c-format msgid "unable to set tty attributes: %s" msgstr "tty 특성을 설정하는 데 실패: %s" #: tools/console.c:394 #, fuzzy msgid "unable to wait on console condition" msgstr "조건을 기다리는 데 실패" #: tools/libvirt-guests.init.sh:100 #, sh-format msgid "Can't connect to $uri. Skipping." msgstr "" #: tools/libvirt-guests.init.sh:164 msgid "libvirt-guests is configured not to start any guests on boot" msgstr "" #: tools/libvirt-guests.init.sh:186 #, sh-format msgid "Ignoring guests on $uri URI" msgstr "" #: tools/libvirt-guests.init.sh:192 #, sh-format msgid "Resuming guests on $uri URI..." msgstr "" #: tools/libvirt-guests.init.sh:195 #, sh-format msgid "Resuming guest $name: " msgstr "" #: tools/libvirt-guests.init.sh:198 #, fuzzy msgid "already active" msgstr "풀이 이미 동작 중" #: tools/libvirt-guests.init.sh:207 tools/libvirt-guests.init.sh:248 msgid "done" msgstr "" #: tools/libvirt-guests.init.sh:226 #, sh-format msgid "Suspending $name: " msgstr "" #: tools/libvirt-guests.init.sh:260 tools/libvirt-guests.init.sh:308 #, fuzzy, sh-format msgid "Starting shutdown on guest: $name" msgstr "'%s' 네트워크를 중지하는 중" #: tools/libvirt-guests.init.sh:267 #, sh-format msgid "Waiting for guest %s to shut down, %d seconds left\\n" msgstr "" #: tools/libvirt-guests.init.sh:270 #, sh-format msgid "Waiting for guest %s to shut down\\n" msgstr "" #: tools/libvirt-guests.init.sh:292 #, sh-format msgid "Shutdown of guest $name failed to complete in time." msgstr "" #: tools/libvirt-guests.init.sh:294 tools/libvirt-guests.init.sh:358 #, sh-format msgid "Shutdown of guest $name complete." msgstr "" #: tools/libvirt-guests.init.sh:332 #, sh-format msgid "Failed to determine state of guest: $guest. Not tracking it anymore." msgstr "" #: tools/libvirt-guests.init.sh:375 #, sh-format msgid "Waiting for %d guests to shut down, %d seconds left\\n" msgstr "" #: tools/libvirt-guests.init.sh:378 #, sh-format msgid "Waiting for %d guests to shut down\\n" msgstr "" #: tools/libvirt-guests.init.sh:403 #, fuzzy, sh-format msgid "Timeout expired while shutting down domains" msgstr "드라이버를 다시 불러오는 중 오류가 발생했습니다" #: tools/libvirt-guests.init.sh:430 msgid "SHUTDOWN_TIMEOUT must be equal or greater than 0" msgstr "" #: tools/libvirt-guests.init.sh:444 #, sh-format msgid "Running guests on $uri URI: " msgstr "" #: tools/libvirt-guests.init.sh:456 msgid "no running guests." msgstr "" #: tools/libvirt-guests.init.sh:467 #, sh-format msgid "Not suspending transient guests on URI: $uri: " msgstr "" #: tools/libvirt-guests.init.sh:478 #, fuzzy, sh-format msgid "Failed to list persistent guests on $uri" msgstr "비밀정보 목록생성 실패" #: tools/libvirt-guests.init.sh:485 #, fuzzy msgid "Failed to list transient guests" msgstr "비밀정보 목록생성 실패" #: tools/libvirt-guests.init.sh:502 #, sh-format msgid "Suspending guests on $uri URI..." msgstr "" #: tools/libvirt-guests.init.sh:504 #, fuzzy, sh-format msgid "Shutting down guests on $uri URI..." msgstr "'%s' 네트워크를 중지하는 중" #: tools/libvirt-guests.init.sh:545 msgid "stopped, with saved guests" msgstr "" #: tools/libvirt-guests.init.sh:549 #, fuzzy msgid "started" msgstr "자동 시작" #: tools/libvirt-guests.init.sh:551 msgid "stopped, with no saved guests" msgstr "" #: tools/libvirt-guests.init.sh:561 #, sh-format msgid "" "Usage: $program_name {start|stop|status|restart|condrestart|try-restart|" "reload|force-reload|gueststatus|shutdown}" msgstr "" #: tools/virsh.c:103 tools/virsh.c:117 #, c-format msgid "%s: %d: failed to allocate %d bytes" msgstr "%s: %d: %d 바이트 할당 실패" #: tools/virsh.c:131 #, c-format msgid "%s: %d: failed to allocate %lu bytes" msgstr "%s: %d: %lu 바이트 할당 실패" #: tools/virsh.c:267 msgid "Failed to reconnect to the hypervisor" msgstr "하이퍼바이저에 재연결 실패" #: tools/virsh.c:271 #, fuzzy msgid "Unable to register disconnect callback" msgstr "%s를 열 수 없음" #: tools/virsh.c:273 msgid "Reconnected to the hypervisor" msgstr "하이퍼바이저로 재연결 됨" #. TRANSLATORS: For now, we aren't using LC_MESSAGES, and the user #. * choices really are limited to just 'y', 'n', 'f' and '?' #: tools/virsh.c:324 msgid "Try again? [y,n,f,?]:" msgstr "" #: tools/virsh.c:330 msgid "y - yes, start editor again" msgstr "" #: tools/virsh.c:331 msgid "n - no, throw away my changes" msgstr "" #: tools/virsh.c:332 msgid "f - force, try to redefine again" msgstr "" #: tools/virsh.c:333 #, fuzzy msgid "? - print this help" msgstr "도움말 프린트하기" #: tools/virsh.c:350 #, fuzzy msgid "This function is not supported on WIN32 platform" msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #: tools/virsh.c:373 msgid "print help" msgstr "도움말 프린트하기" #: tools/virsh.c:374 #, fuzzy msgid "" "Prints global help, command specific help, or help for a\n" " group of related commands" msgstr "전역적 도움말 또는 명령으로된 특정 도움말을 프린트함." #: tools/virsh.c:381 #, fuzzy msgid "" "Prints global help, command specific help, or help for a group of related " "commands" msgstr "전역적 도움말 또는 명령으로된 특정 도움말을 프린트함." #: tools/virsh.c:394 #, fuzzy msgid "" "Grouped commands:\n" "\n" msgstr "" "명령:\n" "\n" #: tools/virsh.c:397 tools/virsh.c:975 #, c-format msgid " %s (help keyword '%s'):\n" msgstr "" #: tools/virsh.c:418 #, fuzzy, c-format msgid "command or command group '%s' doesn't exist" msgstr "'%s' 명령이 존재하지 않음" #: tools/virsh.c:502 #, fuzzy msgid "Failed to complete tree listing" msgstr "정규식 %s를 컴파일하는 데 실패" #: tools/virsh.c:523 #, fuzzy, c-format msgid "mkstemps: failed to create temporary file: %s" msgstr "mkstemp: 임시 파일 생성에 실패: %s" #: tools/virsh.c:530 #, c-format msgid "write: %s: failed to write to temporary file: %s" msgstr "write: %s: 임시 파일에 쓰는 데 실패: %s" #: tools/virsh.c:538 #, c-format msgid "close: %s: failed to write or close temporary file: %s" msgstr "close: %s: 임시 파일을 쓰거나 닫는데 실패: %s" #: tools/virsh.c:579 #, c-format msgid "" "%s: temporary filename contains shell meta or other unacceptable characters " "(is $TMPDIR wrong?)" msgstr "" "%s: 임시 파일명이 셀 메타 문자나 허용되지 않는 문자를 포함합니다($TMPDIR이 잘" "못되었습니까?)" #: tools/virsh.c:612 #, c-format msgid "%s: failed to read temporary file: %s" msgstr "%s: 임시 파일을 읽는 데 실패: %s" #: tools/virsh.c:624 msgid "change the current directory" msgstr "현재 디렉터리를 변경함" #: tools/virsh.c:625 msgid "Change the current directory." msgstr "현재 디렉터리를 변경함." #: tools/virsh.c:630 msgid "directory to switch to (default: home or else root)" msgstr "변경하려는 디렉터리(디폴트: 홈 또는 다른 루트)" #: tools/virsh.c:642 msgid "cd: command valid only in interactive mode" msgstr "cd: 명령어가 양방향 모드에서만 유효합니다" #: tools/virsh.c:653 #, c-format msgid "cd: %s: %s" msgstr "cd: %s: %s" #: tools/virsh.c:665 msgid "print the current directory" msgstr "현재 디렉터리를 출력." #: tools/virsh.c:666 msgid "Print the current directory." msgstr "현재 디렉터리를 출력." #: tools/virsh.c:678 #, c-format msgid "pwd: cannot get current directory: %s" msgstr "pwd: 현재 디렉터리를 얻을 수 없음: %s" #: tools/virsh.c:682 tools/virsh-domain.c:5400 #, c-format msgid "%s\n" msgstr "%s\n" #: tools/virsh.c:693 #, fuzzy msgid "echo arguments" msgstr "알려져 있지 않은 인자 '%s'" #: tools/virsh.c:694 msgid "Echo back arguments, possibly with quoting." msgstr "" #: tools/virsh.c:699 msgid "escape for shell use" msgstr "" #: tools/virsh.c:700 msgid "escape for XML use" msgstr "" #: tools/virsh.c:702 msgid "arguments to echo" msgstr "" #: tools/virsh.c:736 tools/virsh.c:753 tools/virsh-domain.c:521 #: tools/virsh-domain.c:721 tools/virsh-pool.c:234 tools/virsh-volume.c:258 #: tools/virsh-volume.c:480 msgid "Failed to allocate XML buffer" msgstr "XML 버퍼 할당에 실패" #: tools/virsh.c:767 msgid "quit this interactive terminal" msgstr "대화식 터미널 종료" #: tools/virsh.c:853 msgid "print help for this function" msgstr "" #: tools/virsh.c:873 #, fuzzy, c-format msgid "option --%s already seen" msgstr "연결이 이미 열려있습니다" #: tools/virsh.c:883 #, c-format msgid "command '%s' doesn't support option --%s" msgstr "명령 '%s'는 --%s 옵션을 지원하지 않음" #: tools/virsh.c:928 #, c-format msgid "command '%s' requires <%s> option" msgstr "'%s' 명령은 <%s> 옵션이 필요함" #: tools/virsh.c:929 #, c-format msgid "command '%s' requires --%s option" msgstr "'%s' 명령은 --%s 옵션이 필요함" #: tools/virsh.c:972 #, fuzzy, c-format msgid "command group '%s' doesn't exist" msgstr "'%s' 명령이 존재하지 않음" #: tools/virsh.c:993 #, c-format msgid "command '%s' doesn't exist" msgstr "'%s' 명령이 존재하지 않음" #: tools/virsh.c:1005 tools/virsh.c:1592 #, fuzzy, c-format msgid "internal error: bad options in command: '%s'" msgstr "내부 오류: 버퍼가 너무 작음" #: tools/virsh.c:1010 msgid " NAME\n" msgstr " 이름\n" #: tools/virsh.c:1013 msgid "" "\n" " SYNOPSIS\n" msgstr "" "\n" " 시놉시스\n" #: tools/virsh.c:1026 #, c-format msgid "[--%s ]" msgstr "[--%s ]" #: tools/virsh.c:1032 #, c-format msgid "[--%s ]" msgstr "[--%s ]" #: tools/virsh.c:1045 #, fuzzy, c-format msgid "{[--%s] }..." msgstr "[--%s ]" #: tools/virsh.c:1046 #, fuzzy, c-format msgid "[[--%s] ]..." msgstr "[--%s ]" #: tools/virsh.c:1048 #, c-format msgid "<%s>..." msgstr "" #: tools/virsh.c:1049 #, fuzzy, c-format msgid "[<%s>]..." msgstr "[--%s ]" #: tools/virsh.c:1066 msgid "" "\n" " DESCRIPTION\n" msgstr "" "\n" " 설명\n" #: tools/virsh.c:1072 msgid "" "\n" " OPTIONS\n" msgstr "" "\n" " 옵션\n" #: tools/virsh.c:1080 #, fuzzy, c-format msgid "[--%s] " msgstr "[--%s ]" #: tools/virsh.c:1081 #, c-format msgid "--%s " msgstr "--%s " #: tools/virsh.c:1085 #, c-format msgid "--%s " msgstr "--%s " #: tools/virsh.c:1088 tools/virsh.c:1093 #, fuzzy, c-format msgid "[--%s] " msgstr "[--%s ]" #: tools/virsh.c:1093 #, c-format msgid "<%s>" msgstr "" #: tools/virsh.c:1463 #, c-format msgid "internal error: virsh %s: no %s VSH_OT_DATA option" msgstr "내부 오류: virsh %s: %s VSH_OT_DATA 옵션이 없음" #: tools/virsh.c:1515 #, c-format msgid "" "\n" "(Time: %.3f ms)\n" "\n" msgstr "" "\n" "(시간: %.3f ms)\n" "\n" #: tools/virsh.c:1586 #, c-format msgid "unknown command: '%s'" msgstr "알려지지 않은 명령: '%s'" #: tools/virsh.c:1628 #, c-format msgid "expected syntax: --%s <%s>" msgstr "예상된 구문: --%s <%s>" #: tools/virsh.c:1631 msgid "number" msgstr "숫자" #: tools/virsh.c:1631 msgid "string" msgstr "문자열" #: tools/virsh.c:1639 #, fuzzy, c-format msgid "invalid '=' after option --%s" msgstr "%s 내부에 잘못된 인터페이스 포인터" #: tools/virsh.c:1655 #, c-format msgid "unexpected data '%s'" msgstr "예상외의 데이터 '%s'" #: tools/virsh.c:1677 msgid "optdata" msgstr "" #: tools/virsh.c:1677 msgid "bool" msgstr "" #: tools/virsh.c:1678 msgid "(none)" msgstr "" #: tools/virsh.c:1813 msgid "dangling \\" msgstr "" #: tools/virsh.c:1826 msgid "missing \"" msgstr "빠짐 \"" #: tools/virsh.c:1910 tools/virsh-domain-monitor.c:1160 #: tools/virsh-domain-monitor.c:1173 tools/virsh-network.c:341 #: tools/virsh-network.c:347 tools/virsh-network.c:352 #: tools/virsh-network.c:451 tools/virsh-network.c:474 tools/virsh-pool.c:702 #: tools/virsh-pool.c:713 tools/virsh-pool.c:1187 tools/virsh-pool.c:1196 #: tools/virsh-snapshot.c:733 tools/virsh-snapshot.c:783 msgid "yes" msgstr "" #: tools/virsh.c:1910 tools/virsh-domain-monitor.c:1160 #: tools/virsh-domain-monitor.c:1173 tools/virsh-network.c:341 #: tools/virsh-network.c:347 tools/virsh-network.c:352 #: tools/virsh-network.c:451 tools/virsh-network.c:474 tools/virsh-pool.c:702 #: tools/virsh-pool.c:713 tools/virsh-pool.c:1187 tools/virsh-pool.c:1196 #: tools/virsh-snapshot.c:733 tools/virsh-snapshot.c:783 msgid "no" msgstr "" #: tools/virsh.c:1918 #, fuzzy, c-format msgid "unimplemented parameter type %d" msgstr "알려지지 않은 매개변수 유형" #: tools/virsh.c:1955 msgid "no valid connection" msgstr "유효하지 않은 연결" #: tools/virsh.c:2026 msgid "error: " msgstr "오류:" #: tools/virsh.c:2079 msgid "VIRSH_DEBUG not set with a valid numeric value" msgstr "" #: tools/virsh.c:2119 msgid "failed to connect to the hypervisor" msgstr "하이퍼바이저에 연결 실패" #: tools/virsh.c:2149 msgid "failed to get the log file information" msgstr "로그 파일 정보 보기 실패" #: tools/virsh.c:2154 msgid "the log path is not a file" msgstr "로그 경로가 파일이 아님" #: tools/virsh.c:2162 msgid "failed to open the log file. check the log file path" msgstr "로그 파일 열기 실패. 로그 파일 경로 확인" #: tools/virsh.c:2244 msgid "failed to write the log file" msgstr "로그 파일 쓰기 실패" #: tools/virsh.c:2259 #, c-format msgid "%s: failed to write log file: %s" msgstr "%s: 로그 파일 쓰기 실패: %s" #: tools/virsh.c:2407 #, fuzzy msgid "Could not determine home directory" msgstr "디렉터리 %s를 열 수 없음" #: tools/virsh.c:2437 #, c-format msgid "Failed to create '%s': %s" msgstr "'%s' 생성 실패: %s" #: tools/virsh.c:2508 tools/virsh-host.c:94 #, fuzzy, c-format msgid "Failed to disconnect from the hypervisor, %d leaked reference(s)" msgstr "하이퍼바이저에서 연결 끊기 실패" #: tools/virsh.c:2544 #, fuzzy, c-format msgid "" "\n" "%s [options]... []\n" "%s [options]... [args...]\n" "\n" " options:\n" " -c | --connect=URI hypervisor connection URI\n" " -r | --readonly connect readonly\n" " -d | --debug=NUM debug level [0-4]\n" " -h | --help this help\n" " -q | --quiet quiet mode\n" " -t | --timing print timing information\n" " -l | --log=FILE output logging to file\n" " -v short version\n" " -V long version\n" " --version[=TYPE] version, TYPE is short or long (default short)\n" " -e | --escape set escape sequence for console\n" "\n" " commands (non interactive mode):\n" "\n" msgstr "" "\n" "%s [옵션] [명령]\n" "\n" " 옵션:\n" " -c | --connect 하이퍼바이저 연결 URI\n" " -r | --readonly 읽기 전용 연결\n" " -d | --debug 디버그 레벨 [0-5]\n" " -h | --help 도움말\n" " -q | --quiet 정숙 모드\n" " -t | --timing 시간 정보 인쇄\n" " -l | --log 파일에 출력 기록\n" " -v | --version 프로그램 버전\n" "\n" " 명령 (비대화식 모드):\n" #: tools/virsh.c:2561 #, c-format msgid " %s (help keyword '%s')\n" msgstr "" #: tools/virsh.c:2574 #, fuzzy msgid "" "\n" " (specify help for details about the commands in the group)\n" msgstr "" "\n" " (명령에 대한 정보를 보기 위해 help 를 지정)\n" "\n" #: tools/virsh.c:2576 msgid "" "\n" " (specify help for details about the command)\n" "\n" msgstr "" "\n" " (명령에 대한 정보를 보기 위해 help 를 지정)\n" "\n" #: tools/virsh.c:2587 #, c-format msgid "Virsh command line tool of libvirt %s\n" msgstr "" #: tools/virsh.c:2588 #, c-format msgid "" "See web site at %s\n" "\n" msgstr "" #: tools/virsh.c:2590 msgid "Compiled with support for:\n" msgstr "" #: tools/virsh.c:2591 msgid " Hypervisors:" msgstr "" #: tools/virsh.c:2633 msgid " Networking:" msgstr "" #: tools/virsh.c:2657 msgid " Storage:" msgstr "" #: tools/virsh.c:2687 msgid " Miscellaneous:" msgstr "" #: tools/virsh.c:2753 msgid "option -d takes a numeric argument" msgstr "" #: tools/virsh.c:2757 #, fuzzy, c-format msgid "ignoring debug level %d out of range [%d-%d]" msgstr "시작 셀 %d 범위 초과 (0-%d)" #: tools/virsh.c:2798 #, fuzzy, c-format msgid "Invalid string '%s' for escape sequence" msgstr "잘못된 디스크 버스 유형 '%s'" #: tools/virsh.c:2804 #, c-format msgid "unsupported option '-%c'. See --help." msgstr "지원되지 않는 옵션 '-%c'. --help 참조." #: tools/virsh.c:2881 #, fuzzy msgid "Failed to initialize libvirt" msgstr "인증서를 초기화할 수 없습니다: %s" #: tools/virsh.c:2910 #, c-format msgid "" "Welcome to %s, the virtualization interactive terminal.\n" "\n" msgstr "" "%s, 가상화 대화식 터미널에 오신 것을 환영합니다.\n" "\n" #: tools/virsh.c:2913 msgid "" "Type: 'help' for help with commands\n" " 'quit' to quit\n" "\n" msgstr "" "입력: 명령을 사용하여 문제 해결을 위해 'help' 입력\n" " 종료하기 위해 'quit'입력\n" "\n" #: tools/virsh-domain-monitor.c:47 #, fuzzy msgid "no error" msgstr "풀링 오류" #: tools/virsh-domain-monitor.c:49 #, fuzzy msgid "unspecified error" msgstr "예기치 못한 풀 유형" #: tools/virsh-domain-monitor.c:51 #, fuzzy msgid "no space" msgstr "상태 없음" #: tools/virsh-domain-monitor.c:94 #, fuzzy msgid "Failed to retrieve domain XML" msgstr "도메인 %s를 다시 시작하기 실패" #: tools/virsh-domain-monitor.c:99 #, fuzzy msgid "Couldn't parse domain XML" msgstr "도메인을 재개하는 것에 실패" #: tools/virsh-domain-monitor.c:123 msgid "ok" msgstr "" #: tools/virsh-domain-monitor.c:125 msgid "background job" msgstr "" #: tools/virsh-domain-monitor.c:127 msgid "occupied" msgstr "" #: tools/virsh-domain-monitor.c:134 tools/virsh-domain-monitor.c:284 #: tools/virsh-domain-monitor.c:1158 tools/virsh-domain-monitor.c:1170 #: tools/virsh-network.c:345 tools/virsh-pool.c:710 tools/virsh-pool.c:725 #: tools/virsh-pool.c:727 tools/virsh-pool.c:728 tools/virsh-pool.c:729 #: tools/virsh-pool.c:1185 tools/virsh-volume.c:861 tools/virsh-volume.c:1086 #: tools/virsh-volume.c:1093 tools/virsh-volume.c:1094 #: tools/virsh-volume.c:1095 tools/virsh-volume.c:1111 #, fuzzy msgid "unknown" msgstr "알려지지 않음" #: tools/virsh-domain-monitor.c:144 tools/virsh-domain.c:121 #: tools/virsh-pool.c:744 tools/virsh-pool.c:1168 msgid "running" msgstr "실행중" #: tools/virsh-domain-monitor.c:146 tools/virsh-domain.c:119 msgid "idle" msgstr "유휴상태" #: tools/virsh-domain-monitor.c:148 msgid "paused" msgstr "중지됨" #: tools/virsh-domain-monitor.c:150 msgid "in shutdown" msgstr "종료중" #: tools/virsh-domain-monitor.c:152 msgid "shut off" msgstr "종료" #: tools/virsh-domain-monitor.c:154 tools/virsh-domain-monitor.c:249 msgid "crashed" msgstr "충돌됨" #: tools/virsh-domain-monitor.c:156 #, fuzzy msgid "pmsuspended" msgstr "도메인 %s가 중지됨\n" #: tools/virsh-domain-monitor.c:161 tools/virsh-domain.c:125 msgid "no state" msgstr "상태 없음" #: tools/virsh-domain-monitor.c:179 msgid "booted" msgstr "" #: tools/virsh-domain-monitor.c:181 tools/virsh-domain-monitor.c:251 #, fuzzy msgid "migrated" msgstr "이전이 실패했습니다" #: tools/virsh-domain-monitor.c:183 msgid "restored" msgstr "" #: tools/virsh-domain-monitor.c:185 tools/virsh-domain-monitor.c:223 #: tools/virsh-domain-monitor.c:257 #, fuzzy msgid "from snapshot" msgstr "풀을 생성." #: tools/virsh-domain-monitor.c:187 #, fuzzy msgid "unpaused" msgstr "중지됨" #: tools/virsh-domain-monitor.c:189 #, fuzzy msgid "migration canceled" msgstr "이전이 실패했습니다" #: tools/virsh-domain-monitor.c:191 msgid "save canceled" msgstr "" #: tools/virsh-domain-monitor.c:193 msgid "event wakeup" msgstr "" #: tools/virsh-domain-monitor.c:211 tools/virsh-domain-monitor.c:235 msgid "user" msgstr "" #: tools/virsh-domain-monitor.c:213 #, fuzzy msgid "migrating" msgstr "실시간 이전" #: tools/virsh-domain-monitor.c:215 msgid "saving" msgstr "" #: tools/virsh-domain-monitor.c:217 msgid "dumping" msgstr "" #: tools/virsh-domain-monitor.c:219 #, fuzzy msgid "I/O error" msgstr "오류" #: tools/virsh-domain-monitor.c:221 msgid "watchdog" msgstr "" #: tools/virsh-domain-monitor.c:225 #, fuzzy msgid "shutting down" msgstr "종료중" #: tools/virsh-domain-monitor.c:245 #, fuzzy msgid "shutdown" msgstr "종료중" #: tools/virsh-domain-monitor.c:247 #, fuzzy msgid "destroyed" msgstr "풀 %s가 파괴되었습니다\n" #: tools/virsh-domain-monitor.c:253 tools/virsh-domain-monitor.c:1673 #: tools/virsh-domain-monitor.c:1680 msgid "saved" msgstr "" #: tools/virsh-domain-monitor.c:255 #, fuzzy msgid "failed" msgstr "popen 실패" #: tools/virsh-domain-monitor.c:291 msgid "get memory statistics for a domain" msgstr "도메인에 대한 메모리 통계를 얻음" #: tools/virsh-domain-monitor.c:292 #, fuzzy msgid "Get memory statistics for a running domain." msgstr "실행중인 도메인의 메모리 통계를 얻음" #: tools/virsh-domain-monitor.c:297 tools/virsh-domain-monitor.c:355 #: tools/virsh-domain-monitor.c:402 tools/virsh-domain-monitor.c:511 #: tools/virsh-domain-monitor.c:609 tools/virsh-domain-monitor.c:739 #: tools/virsh-domain-monitor.c:787 tools/virsh-domain-monitor.c:959 #: tools/virsh-domain-monitor.c:1086 tools/virsh-domain-monitor.c:1223 #: tools/virsh-domain.c:138 tools/virsh-domain.c:203 tools/virsh-domain.c:562 #: tools/virsh-domain.c:763 tools/virsh-domain.c:811 tools/virsh-domain.c:1034 #: tools/virsh-domain.c:1293 tools/virsh-domain.c:1446 #: tools/virsh-domain.c:1522 tools/virsh-domain.c:1656 #: tools/virsh-domain.c:1718 tools/virsh-domain.c:1804 #: tools/virsh-domain.c:1981 tools/virsh-domain.c:2177 #: tools/virsh-domain.c:2218 tools/virsh-domain.c:2291 #: tools/virsh-domain.c:2797 tools/virsh-domain.c:3189 #: tools/virsh-domain.c:3295 tools/virsh-domain.c:3349 #: tools/virsh-domain.c:3657 tools/virsh-domain.c:3772 #: tools/virsh-domain.c:3915 tools/virsh-domain.c:3953 #: tools/virsh-domain.c:4015 tools/virsh-domain.c:4072 #: tools/virsh-domain.c:4110 tools/virsh-domain.c:4192 #: tools/virsh-domain.c:4261 tools/virsh-domain.c:4464 #: tools/virsh-domain.c:4570 tools/virsh-domain.c:4833 #: tools/virsh-domain.c:5020 tools/virsh-domain.c:5319 #: tools/virsh-domain.c:5585 tools/virsh-domain.c:5634 #: tools/virsh-domain.c:5790 tools/virsh-domain.c:5823 #: tools/virsh-domain.c:5908 tools/virsh-domain.c:5990 #: tools/virsh-domain.c:6076 tools/virsh-domain.c:6280 #: tools/virsh-domain.c:6434 tools/virsh-domain.c:6695 #: tools/virsh-domain.c:6895 tools/virsh-domain.c:6940 #: tools/virsh-domain.c:6984 tools/virsh-domain.c:7023 #: tools/virsh-domain.c:7199 tools/virsh-domain.c:7267 #: tools/virsh-domain.c:7322 tools/virsh-domain.c:7611 #: tools/virsh-domain.c:7675 tools/virsh-domain.c:7745 #: tools/virsh-domain.c:8097 tools/virsh-domain.c:8173 #: tools/virsh-domain.c:8228 tools/virsh-host.c:548 tools/virsh-host.c:660 #: tools/virsh-snapshot.c:120 tools/virsh-snapshot.c:259 #: tools/virsh-snapshot.c:400 tools/virsh-snapshot.c:511 #: tools/virsh-snapshot.c:683 tools/virsh-snapshot.c:1143 #: tools/virsh-snapshot.c:1364 tools/virsh-snapshot.c:1426 #: tools/virsh-snapshot.c:1483 tools/virsh-snapshot.c:1556 msgid "domain name, id or uuid" msgstr "도메인명, id 또는 uuid" #: tools/virsh-domain-monitor.c:317 #, c-format msgid "Failed to get memory statistics for domain %s" msgstr "도메인 %s의 메모리 통계를 얻는 데 실패했습니다" #: tools/virsh-domain-monitor.c:349 #, fuzzy msgid "domain block device size information" msgstr "장치 정보 부재" #: tools/virsh-domain-monitor.c:350 #, fuzzy msgid "Get block device size info for a domain." msgstr "도메인의 장치 블럭 상태 보기" #: tools/virsh-domain-monitor.c:356 tools/virsh-domain-monitor.c:788 #: tools/virsh-domain.c:812 msgid "block device" msgstr "블럭 장치" #: tools/virsh-domain-monitor.c:384 tools/virsh-pool.c:1201 #: tools/virsh-volume.c:865 msgid "Capacity:" msgstr "용량:" #: tools/virsh-domain-monitor.c:385 tools/virsh-pool.c:1204 #: tools/virsh-volume.c:868 msgid "Allocation:" msgstr "할당:" #: tools/virsh-domain-monitor.c:386 msgid "Physical:" msgstr "" #: tools/virsh-domain-monitor.c:396 #, fuzzy msgid "list all domain blocks" msgstr "도메인 목록" #: tools/virsh-domain-monitor.c:397 #, fuzzy msgid "Get the summary of block devices for a domain." msgstr "도메인의 장치 블럭 상태 보기" #: tools/virsh-domain-monitor.c:404 tools/virsh-domain-monitor.c:513 msgid "get inactive rather than running configuration" msgstr "" #: tools/virsh-domain-monitor.c:406 msgid "additionally display the type and device value" msgstr "" #: tools/virsh-domain-monitor.c:448 tools/virsh-domain-monitor.c:551 #: tools/virsh-volume.c:1201 tools/virsh-volume.c:1241 #, fuzzy msgid "Type" msgstr "유형:" #: tools/virsh-domain-monitor.c:449 #, fuzzy msgid "Device" msgstr "장치 %s가 리셋됨\n" #: tools/virsh-domain-monitor.c:449 tools/virsh-domain-monitor.c:451 msgid "Target" msgstr "" #: tools/virsh-domain-monitor.c:449 tools/virsh-domain-monitor.c:451 #: tools/virsh-domain-monitor.c:552 msgid "Source" msgstr "" #: tools/virsh-domain-monitor.c:505 #, fuzzy msgid "list all domain virtual interfaces" msgstr "물리적 호스트 인터페이스 목록 반환" #: tools/virsh-domain-monitor.c:506 #, fuzzy msgid "Get the summary of virtual interfaces for a domain." msgstr "도메인의 장치 블럭 상태 보기" #: tools/virsh-domain-monitor.c:551 #, fuzzy msgid "Interface" msgstr "인터페이스 MAC" #: tools/virsh-domain-monitor.c:552 msgid "Model" msgstr "" #: tools/virsh-domain-monitor.c:552 msgid "MAC" msgstr "" #: tools/virsh-domain-monitor.c:603 #, fuzzy msgid "get link state of a virtual interface" msgstr "물리적 호스트 인터페이스 목록 반환" #: tools/virsh-domain-monitor.c:604 #, fuzzy msgid "Get link state of a domain's virtual interface." msgstr "물리적 호스트 인터페이스 목록 반환" #: tools/virsh-domain-monitor.c:610 tools/virsh-domain.c:1805 #: tools/virsh-domain.c:1982 #, fuzzy msgid "interface device (MAC Address)" msgstr "인터페이스 이름 또는 MAC 주소" #: tools/virsh-domain-monitor.c:612 #, fuzzy msgid "Get persistent interface state" msgstr "영구적인 인터페이스 부착" #: tools/virsh-domain-monitor.c:651 tools/virsh-domain.c:1855 #, fuzzy msgid "Failed to get domain description xml" msgstr "도메인 설명 구문 분석 실패" #: tools/virsh-domain-monitor.c:658 tools/virsh-domain.c:1871 #, fuzzy msgid "Failed to parse domain description xml" msgstr "도메인 설명 구문 분석 실패" #: tools/virsh-domain-monitor.c:665 tools/virsh-domain.c:1878 #, fuzzy msgid "Failed to extract interface information or no interfaces found" msgstr "인터페이스 정보 보기 실패" #: tools/virsh-domain-monitor.c:697 #, fuzzy, c-format msgid "Interface (%s: %s) not found." msgstr "인터페이스를 찾을 수 없음" #: tools/virsh-domain-monitor.c:733 #, fuzzy msgid "domain control interface state" msgstr "도메인이 shutoff 상태가 아닙니다" #: tools/virsh-domain-monitor.c:734 #, fuzzy msgid "Returns state of a control interface to the domain." msgstr "도메인의 상태를 반환." #: tools/virsh-domain-monitor.c:780 msgid "get device block stats for a domain" msgstr "도메인의 장치 블럭 상태 보기" #: tools/virsh-domain-monitor.c:781 #, fuzzy msgid "" "Get device block stats for a running domain. See man page or use --human for " "explanation of fields" msgstr "실행 중인 도메인의 장치 블럭 상태 보기" #: tools/virsh-domain-monitor.c:789 msgid "print a more human readable output" msgstr "" #: tools/virsh-domain-monitor.c:803 #, fuzzy msgid "number of read operations:" msgstr "Xen 데몬에서 읽기 실패" #: tools/virsh-domain-monitor.c:805 #, fuzzy msgid "number of bytes read:" msgstr "메모리의 킬로바이트 수" #: tools/virsh-domain-monitor.c:807 #, fuzzy msgid "number of write operations:" msgstr "동작 중 타임 아웃" #: tools/virsh-domain-monitor.c:809 #, fuzzy msgid "number of bytes written:" msgstr "메모리의 킬로바이트 수" #: tools/virsh-domain-monitor.c:811 #, fuzzy msgid "error count:" msgstr "오류:" #: tools/virsh-domain-monitor.c:813 #, fuzzy msgid "number of flush operations:" msgstr "동작 중 타임 아웃" #: tools/virsh-domain-monitor.c:815 msgid "total duration of reads (ns):" msgstr "" #: tools/virsh-domain-monitor.c:817 msgid "total duration of writes (ns):" msgstr "" #: tools/virsh-domain-monitor.c:819 msgid "total duration of flushes (ns):" msgstr "" #: tools/virsh-domain-monitor.c:870 tools/virsh-domain-monitor.c:890 #, c-format msgid "Failed to get block stats %s %s" msgstr "%s %s 블럭 상태 보기 실패" #: tools/virsh-domain-monitor.c:877 tools/virsh-domain-monitor.c:896 #, fuzzy, c-format msgid "Device: %s\n" msgstr "장치 %s가 리셋됨\n" #: tools/virsh-domain-monitor.c:953 msgid "get network interface stats for a domain" msgstr "도메인의 네트워크 인터페이스 상태 보기" #: tools/virsh-domain-monitor.c:954 msgid "Get network interface stats for a running domain." msgstr "실행 중인 도메인의 네트워크 인터페이스 상태 보기" #: tools/virsh-domain-monitor.c:960 msgid "interface device" msgstr "인터페이스 장치" #: tools/virsh-domain-monitor.c:983 #, c-format msgid "Failed to get interface stats %s %s" msgstr "%s %s 인터페이스 상태 보기 실패" #: tools/virsh-domain-monitor.c:1020 #, fuzzy msgid "Show errors on block devices" msgstr "블럭 장치" #: tools/virsh-domain-monitor.c:1021 #, fuzzy msgid "Show block device errors" msgstr "블럭 장치" #: tools/virsh-domain-monitor.c:1026 #, fuzzy msgid "domain name, id, or uuid" msgstr "도메인명, id 또는 uuid" #: tools/virsh-domain-monitor.c:1059 #, fuzzy msgid "No errors found\n" msgstr "오류 메세지 없음" #: tools/virsh-domain-monitor.c:1080 msgid "domain information" msgstr "도메인 정보" #: tools/virsh-domain-monitor.c:1081 msgid "Returns basic information about the domain." msgstr "도메인에 관한 기본 정보 보기" #: tools/virsh-domain-monitor.c:1112 tools/virsh-domain-monitor.c:1114 msgid "Id:" msgstr "Id:" #: tools/virsh-domain-monitor.c:1115 tools/virsh-pool.c:1149 #: tools/virsh-snapshot.c:715 tools/virsh-volume.c:838 msgid "Name:" msgstr "이름:" #: tools/virsh-domain-monitor.c:1118 tools/virsh-pool.c:1152 msgid "UUID:" msgstr "UUID:" #: tools/virsh-domain-monitor.c:1121 msgid "OS Type:" msgstr "OS 유형:" #: tools/virsh-domain-monitor.c:1126 tools/virsh-domain.c:4508 #: tools/virsh-domain.c:4537 tools/virsh-pool.c:1159 tools/virsh-pool.c:1163 #: tools/virsh-pool.c:1167 tools/virsh-pool.c:1171 tools/virsh-pool.c:1175 #: tools/virsh-snapshot.c:748 msgid "State:" msgstr "상태:" #: tools/virsh-domain-monitor.c:1129 tools/virsh-host.c:270 msgid "CPU(s):" msgstr "CPU:" #: tools/virsh-domain-monitor.c:1136 tools/virsh-domain.c:4515 msgid "CPU time:" msgstr "CPU 시간:" #: tools/virsh-domain-monitor.c:1140 tools/virsh-domain-monitor.c:1143 msgid "Max memory:" msgstr "최대 메모리:" #: tools/virsh-domain-monitor.c:1144 msgid "no limit" msgstr "무제한" #: tools/virsh-domain-monitor.c:1146 msgid "Used memory:" msgstr "사용된 메모리:" #: tools/virsh-domain-monitor.c:1158 tools/virsh-domain-monitor.c:1160 #: tools/virsh-network.c:345 tools/virsh-network.c:347 tools/virsh-pool.c:1185 #: tools/virsh-pool.c:1187 msgid "Persistent:" msgstr "" #: tools/virsh-domain-monitor.c:1164 tools/virsh-network.c:350 #: tools/virsh-network.c:352 tools/virsh-pool.c:1194 tools/virsh-pool.c:1196 msgid "Autostart:" msgstr "Autostart:" #: tools/virsh-domain-monitor.c:1165 msgid "enable" msgstr "활성화됨" #: tools/virsh-domain-monitor.c:1165 msgid "disable" msgstr "비활성화됨" #: tools/virsh-domain-monitor.c:1170 tools/virsh-domain-monitor.c:1172 msgid "Managed save:" msgstr "" #: tools/virsh-domain-monitor.c:1187 msgid "Security model:" msgstr "모안 모델:" #: tools/virsh-domain-monitor.c:1188 msgid "Security DOI:" msgstr "보안 DOI:" #: tools/virsh-domain-monitor.c:1202 msgid "Security label:" msgstr "보안 레이블:" #: tools/virsh-domain-monitor.c:1217 msgid "domain state" msgstr "도메인 상태" #: tools/virsh-domain-monitor.c:1218 msgid "Returns state about a domain." msgstr "도메인의 상태를 반환." #: tools/virsh-domain-monitor.c:1224 msgid "also print reason for the state" msgstr "" #: tools/virsh-domain-monitor.c:1265 msgid "list domains" msgstr "도메인 목록" #: tools/virsh-domain-monitor.c:1266 msgid "Returns list of domains." msgstr "도메인 목록 보기" #: tools/virsh-domain-monitor.c:1373 #, fuzzy msgid "Failed to list domains" msgstr "활성화 도메인 보기 실패" #: tools/virsh-domain-monitor.c:1385 tools/virsh-domain-monitor.c:1393 msgid "Failed to list active domains" msgstr "활성화 도메인 보기 실패" #: tools/virsh-domain-monitor.c:1402 tools/virsh-domain-monitor.c:1411 msgid "Failed to list inactive domains" msgstr "비활성화 도메인 보기 실패" #: tools/virsh-domain-monitor.c:1445 #, fuzzy msgid "Failed to get domain persistence info" msgstr "이전 이후 도메인을 영구적으로 만드는 데 실패" #: tools/virsh-domain-monitor.c:1457 #, fuzzy msgid "Failed to get domain state" msgstr "도메인 %s를 %s에 저장하기 실패" #: tools/virsh-domain-monitor.c:1477 #, fuzzy msgid "Failed to get domain autostart state" msgstr "도메인 %s를 %s에 저장하기 실패" #: tools/virsh-domain-monitor.c:1490 #, fuzzy msgid "Failed to check for managed save image" msgstr "도메인 저장 파일 '%s'를 만드는 데 실패" #: tools/virsh-domain-monitor.c:1502 #, fuzzy msgid "Failed to get snapshot count" msgstr "경로 %s를 만드는 데 실패" #: tools/virsh-domain-monitor.c:1548 msgid "list inactive domains" msgstr "비활성화 도메인 보기" #: tools/virsh-domain-monitor.c:1549 msgid "list inactive & active domains" msgstr "비활성화 & 활성화 도메인 보기" #: tools/virsh-domain-monitor.c:1550 #, fuzzy msgid "list transient domains" msgstr "비활성화 도메인 보기" #: tools/virsh-domain-monitor.c:1551 #, fuzzy msgid "list persistent domains" msgstr "비활성화 도메인 보기" #: tools/virsh-domain-monitor.c:1553 #, fuzzy msgid "list domains with existing snapshot" msgstr "도메인 상태 빠짐" #: tools/virsh-domain-monitor.c:1555 #, fuzzy msgid "list domains without a snapshot" msgstr "도메인을 다른 호스트로 이전" #: tools/virsh-domain-monitor.c:1556 #, fuzzy msgid "list domains in running state" msgstr "도메인이 실행 상태가 아닙니다" #: tools/virsh-domain-monitor.c:1557 #, fuzzy msgid "list domains in paused state" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain-monitor.c:1558 #, fuzzy msgid "list domains in shutoff state" msgstr "도메인이 shutoff 상태가 아닙니다" #: tools/virsh-domain-monitor.c:1559 #, fuzzy msgid "list domains in other states" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain-monitor.c:1560 #, fuzzy msgid "list domains with autostart enabled" msgstr "자동 시작으로 %s 도메인을 표시하기 실패" #: tools/virsh-domain-monitor.c:1562 #, fuzzy msgid "list domains with autostart disabled" msgstr "자동 시작으로 %s 도메인을 표시하기 실패" #: tools/virsh-domain-monitor.c:1564 #, fuzzy msgid "list domains with managed save state" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain-monitor.c:1566 #, fuzzy msgid "list domains without managed save" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain-monitor.c:1567 msgid "list uuid's only" msgstr "" #: tools/virsh-domain-monitor.c:1568 #, fuzzy msgid "list domain names only" msgstr "도메인 목록" #: tools/virsh-domain-monitor.c:1569 msgid "list table (default)" msgstr "" #: tools/virsh-domain-monitor.c:1571 #, fuzzy msgid "mark inactive domains with managed save state" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain-monitor.c:1572 #, fuzzy msgid "show short domain description" msgstr "도메인 설명 구문 분석 실패" #: tools/virsh-domain-monitor.c:1625 msgid "Only one argument from --table, --name and --uuid may be specified." msgstr "" #: tools/virsh-domain-monitor.c:1643 tools/virsh-domain-monitor.c:1648 msgid "Id" msgstr "Id" #: tools/virsh-domain-monitor.c:1643 tools/virsh-domain-monitor.c:1648 #: tools/virsh-interface.c:205 tools/virsh-network.c:334 #: tools/virsh-network.c:432 tools/virsh-nwfilter.c:242 tools/virsh-pool.c:844 #: tools/virsh-pool.c:864 tools/virsh-pool.c:933 tools/virsh-snapshot.c:1263 #: tools/virsh-snapshot.c:1267 tools/virsh-volume.c:1176 #: tools/virsh-volume.c:1191 tools/virsh-volume.c:1241 msgid "Name" msgstr "이름" #: tools/virsh-domain-monitor.c:1643 tools/virsh-domain-monitor.c:1648 #: tools/virsh-interface.c:205 tools/virsh-network.c:432 #: tools/virsh-pool.c:844 tools/virsh-pool.c:869 tools/virsh-pool.c:933 #: tools/virsh-snapshot.c:1263 tools/virsh-snapshot.c:1267 msgid "State" msgstr "상태" #: tools/virsh-domain-monitor.c:1643 msgid "Title" msgstr "" #: tools/virsh-domain-monitor.c:1684 #, fuzzy msgid "Failed to get domain's UUID" msgstr "도메인 UUID 보기 실패 " #: tools/virsh-domain.c:107 #, c-format msgid "failed to get domain '%s'" msgstr "'%s' 도메인 보기 실패" #: tools/virsh-domain.c:117 msgid "offline" msgstr "오프라인" #: tools/virsh-domain.c:132 msgid "attach device from an XML file" msgstr "XML 파일에서 장치 부착" #: tools/virsh-domain.c:133 msgid "Attach device from an XML ." msgstr "XML 파일에서 장치 부착 ." #: tools/virsh-domain.c:139 tools/virsh-domain.c:7612 #: tools/virsh-domain.c:7676 msgid "XML file" msgstr "XML 파일" #: tools/virsh-domain.c:141 tools/virsh-domain.c:213 tools/virsh-domain.c:570 #: tools/virsh-domain.c:831 tools/virsh-domain.c:1039 #: tools/virsh-domain.c:1808 tools/virsh-domain.c:1985 #: tools/virsh-domain.c:4574 tools/virsh-domain.c:4836 #: tools/virsh-domain.c:5023 tools/virsh-domain.c:5912 #: tools/virsh-domain.c:5994 tools/virsh-domain.c:6085 #: tools/virsh-domain.c:6285 tools/virsh-domain.c:7614 #: tools/virsh-domain.c:7678 tools/virsh-domain.c:7749 #: tools/virsh-domain.c:8100 msgid "affect next boot" msgstr "" #: tools/virsh-domain.c:182 #, c-format msgid "Failed to attach device from %s" msgstr "%s에서 장치 부착하기 실패" #: tools/virsh-domain.c:186 msgid "Device attached successfully\n" msgstr "장치가 성공적으로 부착되었습니다\n" #: tools/virsh-domain.c:197 msgid "attach disk device" msgstr "디스크 장치 부착" #: tools/virsh-domain.c:198 msgid "Attach new disk device." msgstr "새 디스크 장치 부착" #: tools/virsh-domain.c:205 msgid "source of disk device" msgstr "디스크 장치의 소스" #: tools/virsh-domain.c:206 tools/virsh-domain.c:8098 msgid "target of disk device" msgstr "디스크 장치의 대상" #: tools/virsh-domain.c:207 msgid "driver of disk device" msgstr "디스크 장치의 드라이버" #: tools/virsh-domain.c:208 msgid "subdriver of disk device" msgstr "디스크 장치의 하부 드라이버" #: tools/virsh-domain.c:209 #, fuzzy msgid "cache mode of disk device" msgstr "디스크 장치의 소스" #: tools/virsh-domain.c:210 msgid "target device type" msgstr "대상 장치 유형" #: tools/virsh-domain.c:211 msgid "mode of device reading and writing" msgstr "읽기 및 쓰기 장치 모드" #: tools/virsh-domain.c:214 msgid "type of source (block|file)" msgstr "" #: tools/virsh-domain.c:215 #, fuzzy msgid "serial of disk device" msgstr "디스크 장치의 소스" #: tools/virsh-domain.c:216 msgid "shareable between domains" msgstr "" #: tools/virsh-domain.c:217 msgid "needs rawio capability" msgstr "" #: tools/virsh-domain.c:218 #, fuzzy msgid "address of disk device" msgstr "디스크 장치의 대상" #: tools/virsh-domain.c:220 msgid "use multifunction pci under specified address" msgstr "" #: tools/virsh-domain.c:411 tools/virsh-domain.c:7780 tools/virsh-pool.c:1096 #: tools/virsh-volume.c:59 #, fuzzy msgid "missing option" msgstr "빠짐 \"" #: tools/virsh-domain.c:425 #, fuzzy, c-format msgid "Unknown source type: '%s'" msgstr "알려지지 않은 usb 소스 유형 '%s' " #: tools/virsh-domain.c:431 #, fuzzy, c-format msgid "No support for %s in command 'attach-disk'" msgstr "'attach-disk' 명령에서 %s을(를) 지원하지 않음" #: tools/virsh-domain.c:475 #, fuzzy msgid "Invalid address." msgstr "잘못된 MAC 주소" #: tools/virsh-domain.c:490 msgid "expecting a pci:0000.00.00.00 address." msgstr "" #: tools/virsh-domain.c:501 msgid "expecting a scsi:00.00.00 address." msgstr "" #: tools/virsh-domain.c:512 msgid "expecting an ide:00.00.00 address." msgstr "" #: tools/virsh-domain.c:539 msgid "Failed to attach disk" msgstr "디스크 부착 성공" #: tools/virsh-domain.c:541 msgid "Disk attached successfully\n" msgstr "디스크가 성공적으로 부착되었습니다\n" #: tools/virsh-domain.c:556 msgid "attach network interface" msgstr "네트워크 인터페이스 부착" #: tools/virsh-domain.c:557 msgid "Attach new network interface." msgstr "새 네트워크 인터페이스 부착" #: tools/virsh-domain.c:563 tools/virsh-domain.c:7746 msgid "network interface type" msgstr "네트워크 인터페이스 유형" #: tools/virsh-domain.c:564 msgid "source of network interface" msgstr "네트워크 인터페이스 소스" #: tools/virsh-domain.c:565 msgid "target network name" msgstr "대상 네트워크 이름" #: tools/virsh-domain.c:566 tools/virsh-domain.c:7747 msgid "MAC address" msgstr "MAC 주소" #: tools/virsh-domain.c:567 msgid "script used to bridge network interface" msgstr "네트워크 인터페이스를 연결하기 위해 사용된 스크립트" #: tools/virsh-domain.c:568 #, fuzzy msgid "model type" msgstr "작업 유형:" #: tools/virsh-domain.c:571 tools/virsh-domain.c:1983 #, fuzzy msgid "control domain's incoming traffics" msgstr "도메인 설정 없음" #: tools/virsh-domain.c:572 tools/virsh-domain.c:1984 msgid "control domain's outgoing traffics" msgstr "" #: tools/virsh-domain.c:652 #, fuzzy, c-format msgid "No support for %s in command 'attach-interface'" msgstr "'attach-interface' 명령에서 %s을(를) 지원하지 않음" #: tools/virsh-domain.c:660 tools/virsh-domain.c:2042 #, fuzzy msgid "inbound format is incorrect" msgstr "이미지 매직이 잘못되었습니다" #: tools/virsh-domain.c:664 tools/virsh-domain.c:2046 msgid "inbound average is mandatory" msgstr "" #: tools/virsh-domain.c:671 tools/virsh-domain.c:2055 #, fuzzy msgid "outbound format is incorrect" msgstr "디스크 암호가 잘못되었습니다" #: tools/virsh-domain.c:675 tools/virsh-domain.c:2059 msgid "outbound average is mandatory" msgstr "" #: tools/virsh-domain.c:739 msgid "Failed to attach interface" msgstr "인터페이스 부착 실패" #: tools/virsh-domain.c:741 msgid "Interface attached successfully\n" msgstr "인터페이스가 성공적으로 부착되었습니다\n" #: tools/virsh-domain.c:756 msgid "autostart a domain" msgstr "자동으로 도메인 시작" #: tools/virsh-domain.c:758 msgid "Configure a domain to be automatically started at boot." msgstr "부팅시 자동으로 도메인이 시작되도록 설정함." #: tools/virsh-domain.c:764 tools/virsh-network.c:92 tools/virsh-pool.c:88 msgid "disable autostarting" msgstr "자동 시작 비활성" #: tools/virsh-domain.c:785 #, c-format msgid "Failed to mark domain %s as autostarted" msgstr "자동 시작으로 %s 도메인을 표시하기 실패" #: tools/virsh-domain.c:787 #, c-format msgid "Failed to unmark domain %s as autostarted" msgstr "자동 시작으로 %s 도메인을 표시 해제하기 실패" #: tools/virsh-domain.c:793 #, c-format msgid "Domain %s marked as autostarted\n" msgstr "%s 도메인은 자동 시작으로 표시됨\n" #: tools/virsh-domain.c:795 #, c-format msgid "Domain %s unmarked as autostarted\n" msgstr "%s 도메인이 자동 시작으로 표시되지 않음\n" #: tools/virsh-domain.c:805 msgid "Set or query a block device I/O tuning parameters." msgstr "" #: tools/virsh-domain.c:806 msgid "Set or query disk I/O parameters such as block throttling." msgstr "" #: tools/virsh-domain.c:815 msgid "total throughput limit in bytes per second" msgstr "" #: tools/virsh-domain.c:818 msgid "read throughput limit in bytes per second" msgstr "" #: tools/virsh-domain.c:821 msgid "write throughput limit in bytes per second" msgstr "" #: tools/virsh-domain.c:824 msgid "total I/O operations limit per second" msgstr "" #: tools/virsh-domain.c:827 msgid "read I/O operations limit per second" msgstr "" #: tools/virsh-domain.c:830 msgid "write I/O operations limit per second" msgstr "" #: tools/virsh-domain.c:832 tools/virsh-domain.c:1040 #: tools/virsh-domain.c:1986 tools/virsh-domain.c:4575 #: tools/virsh-domain.c:4837 tools/virsh-domain.c:5024 #: tools/virsh-domain.c:5913 tools/virsh-domain.c:5995 #: tools/virsh-domain.c:6086 tools/virsh-domain.c:6286 #, fuzzy msgid "affect running domain" msgstr "실행중인 도메인 저장" #: tools/virsh-domain.c:833 tools/virsh-domain.c:1041 #: tools/virsh-domain.c:1987 tools/virsh-domain.c:4576 #: tools/virsh-domain.c:4838 tools/virsh-domain.c:5025 #: tools/virsh-domain.c:5914 tools/virsh-domain.c:5996 #: tools/virsh-domain.c:6087 tools/virsh-domain.c:6287 #, fuzzy msgid "affect current domain" msgstr "실행중인 도메인 저장" #: tools/virsh-domain.c:855 tools/virsh-domain.c:1063 #: tools/virsh-domain.c:2009 tools/virsh-domain.c:3469 #: tools/virsh-domain.c:4642 tools/virsh-domain.c:4863 #: tools/virsh-domain.c:5043 tools/virsh-domain.c:5669 #: tools/virsh-domain.c:5933 tools/virsh-domain.c:6015 #: tools/virsh-domain.c:6132 tools/virsh-domain.c:6308 #: tools/virsh-domain.c:8290 #, fuzzy msgid "--current must be specified exclusively" msgstr "장치 주소 유형이 지정되지 않았습니다" #: tools/virsh-domain.c:878 tools/virsh-domain.c:887 tools/virsh-domain.c:896 #: tools/virsh-domain.c:905 tools/virsh-domain.c:914 tools/virsh-domain.c:923 #: tools/virsh-domain.c:1082 tools/virsh-domain.c:6154 #, fuzzy msgid "Unable to parse integer parameter" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:933 #, fuzzy msgid "Unable to get number of block I/O throttle parameters" msgstr "드라이버에 대한 cgroup을 얻을 수 없음" #: tools/virsh-domain.c:946 #, fuzzy msgid "Unable to get block I/O throttle parameters" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:1017 #, fuzzy msgid "Unable to change block I/O throttle" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:1025 #, fuzzy msgid "Get or set blkio parameters" msgstr "스케줄러 매개 변수 보기/설정" #: tools/virsh-domain.c:1026 msgid "" "Get or set the current blkio parameters for a guest domain.\n" " To get the blkio parameters use following command: \n" "\n" " virsh # blkiotune " msgstr "" #: tools/virsh-domain.c:1036 msgid "IO Weight in range [100, 1000]" msgstr "" #: tools/virsh-domain.c:1038 msgid "per-device IO Weights, in the form of /path/to/device,weight,..." msgstr "" #: tools/virsh-domain.c:1089 #, fuzzy, c-format msgid "Invalid value of %d for I/O weight" msgstr "잘못된 웨이트 값" #: tools/virsh-domain.c:1097 #, fuzzy msgid "Unable to parse string parameter" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:1108 #, fuzzy msgid "Unable to get number of blkio parameters" msgstr "드라이버에 대한 cgroup을 얻을 수 없음" #: tools/virsh-domain.c:1121 #, fuzzy msgid "Unable to get blkio parameters" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:1155 #, fuzzy msgid "Unable to change blkio parameters" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:1199 msgid "bandwidth must be a number" msgstr "" #: tools/virsh-domain.c:1287 msgid "Start a block copy operation." msgstr "" #: tools/virsh-domain.c:1288 tools/virsh-domain.c:1516 #: tools/virsh-domain.c:1517 msgid "Populate a disk from its backing image." msgstr "" #: tools/virsh-domain.c:1294 tools/virsh-domain.c:1447 #: tools/virsh-domain.c:1523 #, fuzzy msgid "fully-qualified path of disk" msgstr "디스크 장치의 대상" #: tools/virsh-domain.c:1295 msgid "path of the copy to create" msgstr "" #: tools/virsh-domain.c:1296 tools/virsh-domain.c:1524 #, fuzzy msgid "bandwidth limit in MiB/s" msgstr "모니터 명령 '%s'를 보낼 수 없음" #: tools/virsh-domain.c:1297 msgid "make the copy share a backing chain" msgstr "" #: tools/virsh-domain.c:1298 #, fuzzy msgid "reuse existing destination" msgstr "목적지의 영구적인 VM" #: tools/virsh-domain.c:1299 #, fuzzy msgid "use raw destination file" msgstr "시스템 종료 동작이 실패했습니다" #: tools/virsh-domain.c:1300 msgid "wait for job to reach mirroring phase" msgstr "" #: tools/virsh-domain.c:1301 tools/virsh-domain.c:1528 #, fuzzy msgid "with --wait, display the progress" msgstr "시스템 버전 정보 보여주기." #: tools/virsh-domain.c:1303 msgid "with --wait, abort if copy exceeds timeout (in seconds)" msgstr "" #: tools/virsh-domain.c:1304 msgid "with --wait, pivot when mirroring starts" msgstr "" #: tools/virsh-domain.c:1305 msgid "with --wait, quit when mirroring starts" msgstr "" #: tools/virsh-domain.c:1307 tools/virsh-domain.c:1532 msgid "with --wait, don't wait for cancel to finish" msgstr "" #: tools/virsh-domain.c:1332 msgid "cannot mix --pivot and --finish" msgstr "" #: tools/virsh-domain.c:1337 tools/virsh-domain.c:6850 #, fuzzy msgid "migrate: Invalid timeout" msgstr "이전: 잘못된 다운타임" #: tools/virsh-domain.c:1343 tools/virsh-domain.c:6856 msgid "migrate: Timeout is too big" msgstr "" #: tools/virsh-domain.c:1364 tools/virsh-domain.c:1583 msgid "blocking control options require --wait" msgstr "" #: tools/virsh-domain.c:1372 msgid "Block Copy started" msgstr "" #: tools/virsh-domain.c:1382 tools/virsh-domain.c:1601 #, fuzzy, c-format msgid "failed to query job for disk %s" msgstr "읽기 용으로 열기 실패: %s" #: tools/virsh-domain.c:1386 tools/virsh-domain.c:1499 msgid "Block Copy" msgstr "" #: tools/virsh-domain.c:1401 tools/virsh-domain.c:1621 #, fuzzy, c-format msgid "failed to abort job for disk %s" msgstr "VM '%s'의 autostart 실패: %s" #: tools/virsh-domain.c:1414 #, fuzzy, c-format msgid "failed to pivot job for disk %s" msgstr "읽기 용으로 열기 실패: %s" #: tools/virsh-domain.c:1418 #, fuzzy, c-format msgid "failed to finish job for disk %s" msgstr "읽기 용으로 열기 실패: %s" #: tools/virsh-domain.c:1422 #, fuzzy msgid "Copy aborted" msgstr "작업 실패" #: tools/virsh-domain.c:1423 msgid "Successfully pivoted" msgstr "" #: tools/virsh-domain.c:1424 msgid "Successfully copied" msgstr "" #: tools/virsh-domain.c:1425 msgid "Now in mirroring phase" msgstr "" #: tools/virsh-domain.c:1440 msgid "Manage active block operations" msgstr "" #: tools/virsh-domain.c:1441 msgid "Query, adjust speed, or cancel active block operations." msgstr "" #: tools/virsh-domain.c:1449 msgid "abort the active job on the specified disk" msgstr "" #: tools/virsh-domain.c:1451 msgid "don't wait for --abort to complete" msgstr "" #: tools/virsh-domain.c:1453 msgid "conclude and pivot a copy job" msgstr "" #: tools/virsh-domain.c:1455 msgid "get active job information for the specified disk" msgstr "" #: tools/virsh-domain.c:1457 #, fuzzy msgid "set the Bandwidth limit in MiB/s" msgstr "모니터 명령 '%s'를 보낼 수 없음" #: tools/virsh-domain.c:1476 msgid "conflict between --abort, --info, and --bandwidth modes" msgstr "" #: tools/virsh-domain.c:1496 tools/virsh-domain.c:1608 #: tools/virsh-domain.c:1633 msgid "Block Pull" msgstr "" #: tools/virsh-domain.c:1502 #, fuzzy msgid "Unknown job" msgstr "알려지지 않음" #: tools/virsh-domain.c:1508 #, c-format msgid " Bandwidth limit: %lu MiB/s\n" msgstr "" #: tools/virsh-domain.c:1526 msgid "path of backing file in chain for a partial pull" msgstr "" #: tools/virsh-domain.c:1527 msgid "wait for job to finish" msgstr "" #: tools/virsh-domain.c:1530 msgid "with --wait, abort if pull exceeds timeout (in seconds)" msgstr "" #: tools/virsh-domain.c:1556 #, fuzzy msgid "invalid timeout" msgstr "이전: 잘못된 다운타임" #: tools/virsh-domain.c:1562 msgid "timeout is too big" msgstr "" #: tools/virsh-domain.c:1591 msgid "Block Pull started" msgstr "" #: tools/virsh-domain.c:1635 msgid "Pull aborted" msgstr "" #: tools/virsh-domain.c:1635 msgid "Pull complete" msgstr "" #: tools/virsh-domain.c:1650 tools/virsh-domain.c:1651 #, fuzzy msgid "Resize block device of domain." msgstr "도메인의 장치 블럭 상태 보기" #: tools/virsh-domain.c:1658 msgid "Fully-qualified path of block device" msgstr "" #: tools/virsh-domain.c:1660 msgid "New size of the block device, as scaled integer (default KiB)" msgstr "" #: tools/virsh-domain.c:1677 #, fuzzy msgid "Path must not be empty" msgstr "플래그가 0이어야 합니다" #: tools/virsh-domain.c:1682 tools/virsh-volume.c:551 tools/virsh-volume.c:556 #: tools/virsh-volume.c:641 tools/virsh-volume.c:646 #, fuzzy msgid "Unable to parse integer" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:1696 #, fuzzy, c-format msgid "Failed to resize block device '%s'" msgstr "장치 %s의 리셋이 실패" #: tools/virsh-domain.c:1698 #, fuzzy, c-format msgid "Block device '%s' is resized" msgstr "장치 %s가 이미 사용중입니다" #: tools/virsh-domain.c:1711 msgid "connect to the guest console" msgstr "게스트 콘솔로 연결" #: tools/virsh-domain.c:1713 msgid "Connect the virtual serial console for the guest" msgstr "게스트를 위한 가상 직렬 콘솔 연결" #: tools/virsh-domain.c:1719 #, fuzzy msgid "character device name" msgstr "알려져 있지 않은 문자 장치 문법 %s" #: tools/virsh-domain.c:1721 msgid "force console connection (disconnect already connected sessions)" msgstr "" #: tools/virsh-domain.c:1723 #, fuzzy msgid "only connect if safe console handling is supported" msgstr "오직 1 %s 컨트롤러만이 지원됩니다" #: tools/virsh-domain.c:1736 msgid "Unable to get domain status" msgstr "도메인 상태를 얻는 데 실패" #: tools/virsh-domain.c:1741 msgid "The domain is not running" msgstr "도메인이 실행중이 아닙니다" #: tools/virsh-domain.c:1746 #, fuzzy msgid "Cannot run interactive console without a controlling TTY" msgstr "연결 없으 비밀 정보를 찾을 수 없습니다" #: tools/virsh-domain.c:1750 #, c-format msgid "Connected to domain %s\n" msgstr "도메인 %s에 연결되었습니다\n" #: tools/virsh-domain.c:1751 #, fuzzy, c-format msgid "Escape character is %s\n" msgstr "Escape 문자는 ^] 입니다\n" #: tools/virsh-domain.c:1778 #, fuzzy msgid "Invalid devname" msgstr "잘못된 플로피 장치 이름: %s" #: tools/virsh-domain.c:1798 #, fuzzy msgid "set link state of a virtual interface" msgstr "비활성화 & 활성화 인터페이스 목록" #: tools/virsh-domain.c:1799 msgid "" "Set link state of a domain's virtual interface. This command wraps usage of " "update-device command." msgstr "" #: tools/virsh-domain.c:1806 #, fuzzy msgid "new state of the device" msgstr "이 장치에 대한 부모가 없음" #: tools/virsh-domain.c:1848 #, fuzzy, c-format msgid "invalid link state '%s'" msgstr "잘못된 도메인 상태 '%s'" #: tools/virsh-domain.c:1909 #, fuzzy, c-format msgid "interface (%s: %s) not found" msgstr "인터페이스를 찾을 수 없음" #: tools/virsh-domain.c:1943 tools/virsh-domain.c:7834 #: tools/virsh-domain.c:7996 tools/virsh-secret.c:196 tools/virsh-secret.c:255 msgid "Failed to allocate memory" msgstr "메모리 할당 실패" #: tools/virsh-domain.c:1948 tools/virsh-domain.c:7839 #: tools/virsh-domain.c:8059 msgid "Failed to create XML" msgstr "XML 생성하기 실패" #: tools/virsh-domain.c:1953 #, fuzzy msgid "Failed to update interface link state" msgstr "인터페이스 %s의 시작이 실패" #: tools/virsh-domain.c:1956 tools/virsh-domain.c:7728 #, fuzzy msgid "Device updated successfully\n" msgstr "장치가 성공적으로 부착되었습니다\n" #: tools/virsh-domain.c:1975 #, fuzzy msgid "get/set parameters of a virtual interface" msgstr "물리적 호스트 인터페이스 목록 반환" #: tools/virsh-domain.c:1976 #, fuzzy msgid "Get/set parameters of a domain's virtual interface." msgstr "물리적 호스트 인터페이스 목록 반환" #: tools/virsh-domain.c:2071 #, fuzzy msgid "Unable to get number of interface parameters" msgstr "드라이버에 대한 cgroup을 얻을 수 없음" #: tools/virsh-domain.c:2088 #, fuzzy msgid "Unable to get interface parameters" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:2153 #, fuzzy msgid "Unable to set interface parameters" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:2171 msgid "suspend a domain" msgstr "도메인을 중지함" #: tools/virsh-domain.c:2172 msgid "Suspend a running domain." msgstr "실행중인 도메인 중지." #: tools/virsh-domain.c:2195 #, c-format msgid "Domain %s suspended\n" msgstr "도메인 %s가 중지됨\n" #: tools/virsh-domain.c:2197 #, c-format msgid "Failed to suspend domain %s" msgstr "도메인 %s를 중지하기 실패" #: tools/virsh-domain.c:2209 msgid "suspend a domain gracefully using power management functions" msgstr "" #: tools/virsh-domain.c:2211 msgid "" "Suspends a running domain using guest OS's power management. (Note: This " "requires a guest agent configured and running in the guest OS)." msgstr "" #: tools/virsh-domain.c:2219 #, fuzzy msgid "duration in seconds" msgstr "일시정지 동작이 실패했습니다" #: tools/virsh-domain.c:2220 tools/virsh-host.c:481 msgid "mem(Suspend-to-RAM), disk(Suspend-to-Disk), hybrid(Hybrid-Suspend)" msgstr "" #: tools/virsh-domain.c:2243 tools/virsh-host.c:505 #, fuzzy msgid "Invalid duration argument" msgstr "잘못된 매개변수 갯수" #: tools/virsh-domain.c:2248 tools/virsh-host.c:500 #, fuzzy msgid "Invalid target argument" msgstr "잘못된 인수" #: tools/virsh-domain.c:2259 tools/virsh-host.c:521 #, fuzzy msgid "Invalid target" msgstr "잘못된 인수" #: tools/virsh-domain.c:2264 #, fuzzy, c-format msgid "Domain %s could not be suspended" msgstr "도메인 %s가 중지됨\n" #: tools/virsh-domain.c:2269 #, fuzzy, c-format msgid "Domain %s successfully suspended" msgstr "도메인 %s가 중지됨\n" #: tools/virsh-domain.c:2284 msgid "wakeup a domain suspended by dompmsuspend command" msgstr "" #: tools/virsh-domain.c:2285 #, fuzzy msgid "Wakeup a domain previously suspended by dompmsuspend command." msgstr "이전에 중지된 도메인을 다시 시작함." #: tools/virsh-domain.c:2310 #, fuzzy, c-format msgid "Domain %s could not be woken up" msgstr "도메인 %s가 중지됨\n" #: tools/virsh-domain.c:2315 #, fuzzy, c-format msgid "Domain %s successfully woken up" msgstr "도메인 %s가 중지됨\n" #: tools/virsh-domain.c:2329 #, fuzzy msgid "undefine a domain" msgstr "도메인 정의" #: tools/virsh-domain.c:2331 msgid "Undefine an inactive domain, or convert persistent to transient." msgstr "" #: tools/virsh-domain.c:2336 tools/virsh-domain.c:6611 msgid "domain name or uuid" msgstr "도메인명 또는 uuid" #: tools/virsh-domain.c:2337 #, fuzzy msgid "remove domain managed state file" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain.c:2339 msgid "" "remove associated storage volumes (comma separated list of targets or source " "paths) (see domblklist)" msgstr "" #: tools/virsh-domain.c:2342 msgid "remove all associated storage volumes (use with caution)" msgstr "" #: tools/virsh-domain.c:2344 msgid "wipe data on the removed volumes" msgstr "" #: tools/virsh-domain.c:2346 #, fuzzy msgid "remove all domain snapshot metadata, if inactive" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain.c:2471 msgid "Storage volume deletion is supported only on stopped domains" msgstr "" #: tools/virsh-domain.c:2476 msgid "Specified both --storage and --remove-all-storage" msgstr "" #: tools/virsh-domain.c:2481 #, fuzzy msgid "Could not retrieve domain XML description" msgstr "저장소 풀 정보" #: tools/virsh-domain.c:2554 #, c-format msgid "" "Storage volume '%s'(%s) is not managed by libvirt. Remove it manually.\n" msgstr "" #: tools/virsh-domain.c:2568 #, c-format msgid "Volume '%s' was not found in domain's definition.\n" msgstr "" #: tools/virsh-domain.c:2614 #, fuzzy, c-format msgid "Unable to remove metadata of %d snapshots" msgstr "%s를 열 수 없음" #: tools/virsh-domain.c:2615 #, fuzzy, c-format msgid "Refusing to undefine while %d snapshots exist" msgstr "도메인 저장 파일 '%s'를 만드는 데 실패" #: tools/virsh-domain.c:2624 #, c-format msgid "Domain %s has been undefined\n" msgstr "도메인 %s는 정의되지 않음\n" #: tools/virsh-domain.c:2627 #, c-format msgid "Failed to undefine domain %s" msgstr "도메인 %s를 정의하지 않기 실패" #: tools/virsh-domain.c:2635 #, c-format msgid "Wiping volume '%s'(%s) ... " msgstr "" #: tools/virsh-domain.c:2639 #, fuzzy msgid "Failed! Volume not removed." msgstr "루트를 전용으로 만들 수 없음" #: tools/virsh-domain.c:2643 msgid "Done.\n" msgstr "" #: tools/virsh-domain.c:2649 #, fuzzy, c-format msgid "Failed to remove storage volume '%s'(%s)" msgstr "경로가 '%s'인 저장소 볼륨을 여는 데 실패했습니다" #: tools/virsh-domain.c:2653 #, fuzzy, c-format msgid "Volume '%s'(%s) removed.\n" msgstr "루트를 전용으로 만들 수 없음" #: tools/virsh-domain.c:2686 msgid "start a (previously defined) inactive domain" msgstr "(기존에 정의된) 비활성화 도메인 시작" #: tools/virsh-domain.c:2687 msgid "" "Start a domain, either from the last managedsave\n" " state, or via a fresh boot if no managedsave state\n" " is present." msgstr "" #: tools/virsh-domain.c:2694 msgid "name of the inactive domain" msgstr "비활성화 도메인명" #: tools/virsh-domain.c:2696 tools/virsh-domain.c:5478 msgid "attach to console after creation" msgstr "만든 다음에 콘솔에 붙이기" #: tools/virsh-domain.c:2698 tools/virsh-domain.c:5480 #, fuzzy msgid "leave the guest paused after creation" msgstr "만든 다음에 콘솔에 붙이기" #: tools/virsh-domain.c:2700 tools/virsh-domain.c:5481 msgid "automatically destroy the guest when virsh disconnects" msgstr "" #: tools/virsh-domain.c:2702 msgid "avoid file system cache when loading" msgstr "" #: tools/virsh-domain.c:2704 msgid "force fresh boot by discarding any managed save" msgstr "" #: tools/virsh-domain.c:2727 msgid "Domain is already active" msgstr "이미 도메인이 활성화됨" #: tools/virsh-domain.c:2767 #, c-format msgid "Failed to start domain %s" msgstr "도메인 %s 시작하기 실패" #: tools/virsh-domain.c:2772 #, c-format msgid "Domain %s started\n" msgstr "도메인 %s가 시작됨\n" #: tools/virsh-domain.c:2790 msgid "save a domain state to a file" msgstr "도메인 상태를 파일에 저장" #: tools/virsh-domain.c:2791 #, fuzzy msgid "Save the RAM state of a running domain." msgstr "실행중인 도메인 저장" #: tools/virsh-domain.c:2796 tools/virsh-domain.c:3188 #: tools/virsh-domain.c:3655 msgid "avoid file system cache when saving" msgstr "" #: tools/virsh-domain.c:2798 msgid "where to save the data" msgstr "데이터를 저장할 장소" #: tools/virsh-domain.c:2800 tools/virsh-domain.c:3066 #: tools/virsh-domain.c:3590 tools/virsh-domain.c:6700 #, fuzzy msgid "filename containing updated XML for the target" msgstr "XML 볼륨 설명이 있는 파일" #: tools/virsh-domain.c:2801 tools/virsh-domain.c:3067 #: tools/virsh-domain.c:3124 #, fuzzy msgid "set domain to be running on restore" msgstr "도메인이 실행 상태가 아닙니다" #: tools/virsh-domain.c:2802 tools/virsh-domain.c:3068 #: tools/virsh-domain.c:3125 #, fuzzy msgid "set domain to be paused on restore" msgstr "최대 허용가능 다운타임을 설정" #: tools/virsh-domain.c:2803 tools/virsh-domain.c:3192 #, fuzzy msgid "display the progress of save" msgstr "시스템 버전 정보 보여주기." #: tools/virsh-domain.c:2841 tools/virsh-domain.c:3619 #: tools/virsh-domain.c:6739 #, fuzzy msgid "malformed xml argument" msgstr "잘못된 형식의 group 요소" #: tools/virsh-domain.c:2855 #, c-format msgid "Failed to save domain %s to %s" msgstr "도메인 %s를 %s에 저장하기 실패" #: tools/virsh-domain.c:2996 msgid "Save" msgstr "" #: tools/virsh-domain.c:3001 #, fuzzy, c-format msgid "" "\n" "Domain %s saved to %s\n" msgstr "도메인 %s는 %s에 저장됨\n" #: tools/virsh-domain.c:3013 #, fuzzy msgid "saved state domain information in XML" msgstr "XML에 있는 도메인 정보" #: tools/virsh-domain.c:3014 #, fuzzy msgid "" "Output the domain information for a saved state file,\n" "as an XML dump to stdout." msgstr "XML 덤프로서의 도메인 정보를 표준 출력으로 출력." #: tools/virsh-domain.c:3020 #, fuzzy msgid "saved state file to read" msgstr "'%s' 읽기 위한 파이프 생성에 실패" #: tools/virsh-domain.c:3021 tools/virsh-domain.c:6436 #: tools/virsh-snapshot.c:514 tools/virsh-snapshot.c:1367 msgid "include security sensitive information in XML dump" msgstr "XML 덤프에 보안상 중요한 정보를 포함합니다" #: tools/virsh-domain.c:3058 #, fuzzy msgid "redefine the XML for a domain's saved state file" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain.c:3059 #, fuzzy msgid "Replace the domain XML associated with a saved state file" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain.c:3064 msgid "saved state file to modify" msgstr "" #: tools/virsh-domain.c:3093 #, fuzzy msgid "malformed or missing xml argument" msgstr "잘못된 형식의 group 요소" #: tools/virsh-domain.c:3101 tools/virsh-snapshot.c:491 #, fuzzy, c-format msgid "Failed to update %s" msgstr "%s 생성 실패" #: tools/virsh-domain.c:3105 #, c-format msgid "State file %s updated.\n" msgstr "" #: tools/virsh-domain.c:3117 #, fuzzy msgid "edit XML for a domain's saved state file" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain.c:3118 #, fuzzy msgid "Edit the domain XML associated with a saved state file" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain.c:3123 #, fuzzy msgid "saved state file to edit" msgstr "도메인 상태를 파일에 저장" #: tools/virsh-domain.c:3147 msgid "--running and --saved are mutually exclusive" msgstr "" #: tools/virsh-domain.c:3160 #, fuzzy, c-format msgid "Saved image %s XML configuration not changed.\n" msgstr "도메인 %s XML 설정이 변경되지 않았습니다.\n" #: tools/virsh-domain.c:3168 #, fuzzy, c-format msgid "State file %s edited.\n" msgstr "%s 네트워크가 정의되지 않음\n" #: tools/virsh-domain.c:3179 #, fuzzy msgid "managed save of a domain state" msgstr "도메인 상태를 파일에 저장" #: tools/virsh-domain.c:3180 msgid "" "Save and destroy a running domain, so it can be restarted from\n" " the same state at a later time. When the virsh 'start'\n" " command is next run for the domain, it will automatically\n" " be started from this saved state." msgstr "" #: tools/virsh-domain.c:3190 #, fuzzy msgid "set domain to be running on next start" msgstr "도메인이 실행 상태가 아닙니다" #: tools/virsh-domain.c:3191 #, fuzzy msgid "set domain to be paused on next start" msgstr "최대 허용가능 다운타임을 설정" #: tools/virsh-domain.c:3227 #, fuzzy, c-format msgid "Failed to save domain %s state" msgstr "도메인 %s를 %s에 저장하기 실패" #: tools/virsh-domain.c:3271 msgid "Managedsave" msgstr "" #: tools/virsh-domain.c:3276 #, fuzzy, c-format msgid "" "\n" "Domain %s state saved by libvirt\n" msgstr "도메인 %s가 시작됨\n" #: tools/virsh-domain.c:3289 #, fuzzy msgid "Remove managed save of a domain" msgstr "도메인의 상태를 반환." #: tools/virsh-domain.c:3290 msgid "Remove an existing managed save state file from a domain" msgstr "" #: tools/virsh-domain.c:3315 #, fuzzy msgid "Failed to check for domain managed save image" msgstr "도메인 저장 파일 '%s'를 만드는 데 실패" #: tools/virsh-domain.c:3321 #, fuzzy, c-format msgid "Failed to remove managed save image for domain %s" msgstr "도메인 %s의 메모리 통계를 얻는 데 실패했습니다" #: tools/virsh-domain.c:3326 #, c-format msgid "Removed managedsave image for domain %s" msgstr "" #: tools/virsh-domain.c:3329 #, c-format msgid "Domain %s has no manage save image; removal skipped" msgstr "" #: tools/virsh-domain.c:3343 msgid "show/set scheduler parameters" msgstr "스케줄러 매개 변수 보기/설정" #: tools/virsh-domain.c:3344 msgid "Show/Set scheduler parameters." msgstr "스케줄러 매개 변수 보기/설정" #: tools/virsh-domain.c:3350 msgid "parameter=value" msgstr "parameter=value" #: tools/virsh-domain.c:3351 msgid "weight for XEN_CREDIT" msgstr "XEN_CREDIT의 weight" #: tools/virsh-domain.c:3352 msgid "cap for XEN_CREDIT" msgstr "XEN_CREDIT의 cap" #: tools/virsh-domain.c:3353 msgid "get/set current scheduler info" msgstr "" #: tools/virsh-domain.c:3354 #, fuzzy msgid "get/set value to be used on next boot" msgstr "최대 허용가능 다운타임을 설정" #: tools/virsh-domain.c:3355 #, fuzzy msgid "get/set value from running domain" msgstr "실행중인 도메인 저장" #: tools/virsh-domain.c:3371 msgid "Invalid value of weight" msgstr "잘못된 웨이트 값" #: tools/virsh-domain.c:3385 msgid "Invalid value of cap" msgstr "잘못된 캡 값" #: tools/virsh-domain.c:3397 msgid "Invalid syntax for --set, expecting name=value" msgstr "--set 사용시 잘못된 문법. name=value를 사용하십시오" #: tools/virsh-domain.c:3412 msgid "Invalid value for parameter, expecting an int" msgstr "매개변수에 잘못된 값. 정수가 필요합니다" #: tools/virsh-domain.c:3419 msgid "Invalid value for parameter, expecting an unsigned int" msgstr "매개변수에 잘못된 값. 부호없는 정수가 필요합니다" #: tools/virsh-domain.c:3426 #, fuzzy msgid "Invalid value for parameter, expecting a long long" msgstr "매개변수에 잘못된 값. 64비트 정수(long long)가 필요합니다" #: tools/virsh-domain.c:3433 msgid "Invalid value for parameter, expecting an unsigned long long" msgstr "매개변수에 잘못된 값. 부호없는 64비트 정수(long long)가 필요합니다" #: tools/virsh-domain.c:3439 msgid "Invalid value for parameter, expecting a double" msgstr "매개변수에 잘못된 값. 배정도 실수(double)가 필요합니다" #: tools/virsh-domain.c:3489 tools/virsh-domain.c:3493 msgid "Scheduler" msgstr "스케줄러" #: tools/virsh-domain.c:3493 msgid "Unknown" msgstr "알려지지 않음" #: tools/virsh-domain.c:3550 #, fuzzy, c-format msgid "invalid scheduler option: %s" msgstr "잘못된 응답 헤더" #: tools/virsh-domain.c:3557 msgid "cannot query both live and config at once" msgstr "" #: tools/virsh-domain.c:3580 msgid "restore a domain from a saved state in a file" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain.c:3581 msgid "Restore a domain." msgstr "도메인 복구." #: tools/virsh-domain.c:3586 msgid "the state to restore" msgstr "복구 상태" #: tools/virsh-domain.c:3588 msgid "avoid file system cache when restoring" msgstr "" #: tools/virsh-domain.c:3591 #, fuzzy msgid "restore domain into running state" msgstr "도메인이 실행 상태가 아닙니다" #: tools/virsh-domain.c:3592 #, fuzzy msgid "restore domain into paused state" msgstr "파일에 저장된 상태에서 도메인을 복구" #: tools/virsh-domain.c:3630 #, c-format msgid "Failed to restore domain from %s" msgstr "%s에서 도메인을 복구하기 실패" #: tools/virsh-domain.c:3634 #, c-format msgid "Domain restored from %s\n" msgstr "%s에서 도메인이 복구됨\n" #: tools/virsh-domain.c:3646 msgid "dump the core of a domain to a file for analysis" msgstr "도메인을 파일에 코어 덤프하여 분석" #: tools/virsh-domain.c:3647 msgid "Core dump a domain." msgstr "도메인을 코어 덤프함." #: tools/virsh-domain.c:3652 msgid "perform a live core dump if supported" msgstr "지원되는 경우 라이브 코어 덤프를 합니다" #: tools/virsh-domain.c:3653 msgid "crash the domain after core dump" msgstr "코어 덤프한 다음 도메인을 크래시" #: tools/virsh-domain.c:3656 #, fuzzy msgid "reset the domain after core dump" msgstr "코어 덤프한 다음 도메인을 크래시" #: tools/virsh-domain.c:3658 msgid "where to dump the core" msgstr "코어 덤프할 위치" #: tools/virsh-domain.c:3659 #, fuzzy msgid "display the progress of dump" msgstr "시스템 버전 정보 보여주기." #: tools/virsh-domain.c:3660 #, fuzzy msgid "dump domain's memory only" msgstr "도메인 목록" #: tools/virsh-domain.c:3703 #, c-format msgid "Failed to core dump domain %s to %s" msgstr "도메인 %s를 %s에 코어 덤프하기 실패" #: tools/virsh-domain.c:3750 msgid "Dump" msgstr "" #: tools/virsh-domain.c:3755 #, fuzzy, c-format msgid "" "\n" "Domain %s dumped to %s\n" msgstr "도메인 %s가 %s에 덤프되었습니다\n" #: tools/virsh-domain.c:3765 msgid "take a screenshot of a current domain console and store it into a file" msgstr "" #: tools/virsh-domain.c:3767 msgid "screenshot of a current domain console" msgstr "" #: tools/virsh-domain.c:3773 #, fuzzy msgid "where to store the screenshot" msgstr "데이터를 저장할 장소" #: tools/virsh-domain.c:3774 msgid "ID of a screen to take screenshot of" msgstr "" #: tools/virsh-domain.c:3796 #, fuzzy msgid "Invalid domain supplied" msgstr "잘못된 도메인 유형 %s" #: tools/virsh-domain.c:3838 tools/virsh-volume.c:565 tools/virsh-volume.c:654 #, fuzzy msgid "file must not be empty" msgstr "플래그가 0이어야 합니다" #: tools/virsh-domain.c:3843 #, fuzzy msgid "invalid screen ID" msgstr "잘못된 비밀정보" #: tools/virsh-domain.c:3854 #, fuzzy, c-format msgid "could not take a screenshot of %s" msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #: tools/virsh-domain.c:3867 #, fuzzy, c-format msgid "cannot create file %s" msgstr "%s 파일을 읽을 수 없음" #: tools/virsh-domain.c:3875 #, fuzzy, c-format msgid "could not receive data from domain %s" msgstr "데이터를 수신할 수 없음: %s" #: tools/virsh-domain.c:3880 tools/virsh-volume.c:586 tools/virsh-volume.c:680 #, fuzzy, c-format msgid "cannot close file %s" msgstr "파일 '%s'를 닫을 수 없음" #: tools/virsh-domain.c:3885 #, fuzzy, c-format msgid "cannot close stream on domain %s" msgstr "도메인 %d에 대한 cputime을 읽을 수 없음" #: tools/virsh-domain.c:3889 #, fuzzy, c-format msgid "Screenshot saved to %s, with type of %s" msgstr "파일 '%s'를 stat할 수 없음" #: tools/virsh-domain.c:3909 msgid "resume a domain" msgstr "도메인을 다시 시작" #: tools/virsh-domain.c:3910 msgid "Resume a previously suspended domain." msgstr "이전에 중지된 도메인을 다시 시작함." #: tools/virsh-domain.c:3933 #, c-format msgid "Domain %s resumed\n" msgstr "도메인 %s가 다시 시작됨\n" #: tools/virsh-domain.c:3935 #, c-format msgid "Failed to resume domain %s" msgstr "도메인 %s를 다시 시작하기 실패" #: tools/virsh-domain.c:3947 msgid "gracefully shutdown a domain" msgstr "도메인을 종료" #: tools/virsh-domain.c:3948 msgid "Run shutdown in the target domain." msgstr "대상 도메인에서 종료하기 실행" #: tools/virsh-domain.c:3954 tools/virsh-domain.c:4016 #, fuzzy msgid "shutdown mode: acpi|agent" msgstr "시스템 종료 동작이 실패했습니다" #: tools/virsh-domain.c:3972 tools/virsh-domain.c:4033 #: tools/virsh-domain.c:4236 #, fuzzy msgid "Invalid type" msgstr "잘못된 파티션 유형" #: tools/virsh-domain.c:3982 tools/virsh-domain.c:4043 #, c-format msgid "Unknown mode %s value, expecting 'acpi' or 'agent'" msgstr "" #: tools/virsh-domain.c:3995 #, c-format msgid "Domain %s is being shutdown\n" msgstr "도메인 %s가 종료됨\n" #: tools/virsh-domain.c:3997 #, c-format msgid "Failed to shutdown domain %s" msgstr "도메인 %s를 종료하기 실패" #: tools/virsh-domain.c:4009 msgid "reboot a domain" msgstr "도메인을 재부팅" #: tools/virsh-domain.c:4010 msgid "Run a reboot command in the target domain." msgstr "대상 도메인에서 재부팅 명령 실행." #: tools/virsh-domain.c:4052 #, c-format msgid "Domain %s is being rebooted\n" msgstr "도메인 %s가 재부팅됨\n" #: tools/virsh-domain.c:4054 #, c-format msgid "Failed to reboot domain %s" msgstr "도메인 %s를 재부팅하기 실패" #: tools/virsh-domain.c:4066 #, fuzzy msgid "reset a domain" msgstr "도메인을 다시 시작" #: tools/virsh-domain.c:4067 msgid "Reset the target domain as if by power button" msgstr "" #: tools/virsh-domain.c:4090 #, fuzzy, c-format msgid "Domain %s was reset\n" msgstr "도메인 %s가 다시 시작됨\n" #: tools/virsh-domain.c:4092 #, fuzzy, c-format msgid "Failed to reset domain %s" msgstr "도메인 %s를 다시 시작하기 실패" #: tools/virsh-domain.c:4104 msgid "domain job information" msgstr "도메인 작업 정보" #: tools/virsh-domain.c:4105 msgid "Returns information about jobs running on a domain." msgstr "도메인에서 실행중인 작업에 대한 정보를 반환합니다." #: tools/virsh-domain.c:4131 msgid "Job type:" msgstr "작업 유형:" #: tools/virsh-domain.c:4134 msgid "Bounded" msgstr "묶임" #: tools/virsh-domain.c:4138 msgid "Unbounded" msgstr "묶이지 않음" #: tools/virsh-domain.c:4143 msgid "None" msgstr "없음" #: tools/virsh-domain.c:4147 msgid "Time elapsed:" msgstr "전체 시간:" #: tools/virsh-domain.c:4149 msgid "Time remaining:" msgstr "남은 시간:" #: tools/virsh-domain.c:4152 msgid "Data processed:" msgstr "처리된 데이터:" #: tools/virsh-domain.c:4154 msgid "Data remaining:" msgstr "남은 데이터:" #: tools/virsh-domain.c:4156 msgid "Data total:" msgstr "전체 데이터:" #: tools/virsh-domain.c:4160 msgid "Memory processed:" msgstr "처리된 메모리:" #: tools/virsh-domain.c:4162 msgid "Memory remaining:" msgstr "남은 메모리:" #: tools/virsh-domain.c:4164 msgid "Memory total:" msgstr "전체 메모리:" #: tools/virsh-domain.c:4168 msgid "File processed:" msgstr "처리된 파일:" #: tools/virsh-domain.c:4170 msgid "File remaining:" msgstr "남은 파일:" #: tools/virsh-domain.c:4172 msgid "File total:" msgstr "전체 파일:" #: tools/virsh-domain.c:4186 msgid "abort active domain job" msgstr "동작중인 도메인 작업을 중단" #: tools/virsh-domain.c:4187 msgid "Aborts the currently running domain job" msgstr "현재 실행중인 도메인 작업을 강제 중단합니다" #: tools/virsh-domain.c:4219 msgid "connection vcpu maximum" msgstr "" #: tools/virsh-domain.c:4220 #, fuzzy msgid "Show maximum number of virtual CPUs for guests on this connection." msgstr "게스트 도메인의 가상 CPU의 갯수를 변경합니다." #: tools/virsh-domain.c:4225 #, fuzzy msgid "domain type" msgstr "도메인 상태" #: tools/virsh-domain.c:4255 #, fuzzy msgid "domain vcpu counts" msgstr "도메인 vcpu 정보" #: tools/virsh-domain.c:4256 #, fuzzy msgid "Returns the number of virtual CPUs used by the domain." msgstr "게스트 도메인의 가상 CPU의 갯수를 변경합니다." #: tools/virsh-domain.c:4262 msgid "get maximum cap on vcpus" msgstr "" #: tools/virsh-domain.c:4263 msgid "get number of currently active vcpus" msgstr "" #: tools/virsh-domain.c:4264 #, fuzzy msgid "get value from running domain" msgstr "실행중인 도메인 저장" #: tools/virsh-domain.c:4265 msgid "get value to be used on next boot" msgstr "" #: tools/virsh-domain.c:4267 #, fuzzy msgid "get value according to current domain state" msgstr "실행중인 도메인 저장" #: tools/virsh-domain.c:4290 #, c-format msgid "" "when using --%s, one of --config, --live, or --current must be specified" msgstr "" #: tools/virsh-domain.c:4295 #, c-format msgid "when using --%s, either --maximum or --active must be specified" msgstr "" #: tools/virsh-domain.c:4315 #, fuzzy msgid "--maximum and --active cannot both be specified" msgstr "다른 종류의 보조 기억이 지정될 수 없습니다" #: tools/virsh-domain.c:4320 msgid "--config, --live, and --current are mutually exclusive" msgstr "" #: tools/virsh-domain.c:4365 tools/virsh-domain.c:4385 msgid "maximum" msgstr "" #: tools/virsh-domain.c:4365 tools/virsh-domain.c:4421 msgid "config" msgstr "" #: tools/virsh-domain.c:4385 tools/virsh-domain.c:4442 msgid "live" msgstr "" #: tools/virsh-domain.c:4421 tools/virsh-domain.c:4442 msgid "current" msgstr "" #: tools/virsh-domain.c:4458 #, fuzzy msgid "detailed domain vcpu information" msgstr "도메인 vcpu 정보" #: tools/virsh-domain.c:4459 msgid "Returns basic information about the domain virtual CPUs." msgstr "도메인 가상 CPU에 관한 기본 정보 보기" #: tools/virsh-domain.c:4506 tools/virsh-domain.c:4535 #: tools/virsh-domain.c:4708 msgid "VCPU:" msgstr "VCPU:" #: tools/virsh-domain.c:4507 tools/virsh-domain.c:4536 msgid "CPU:" msgstr "CPU:" #: tools/virsh-domain.c:4517 tools/virsh-domain.c:4539 msgid "CPU Affinity:" msgstr "CPU 동질관계:" #: tools/virsh-domain.c:4536 tools/virsh-domain.c:4537 #: tools/virsh-domain.c:4538 msgid "N/A" msgstr "" #: tools/virsh-domain.c:4538 #, fuzzy msgid "CPU time" msgstr "CPU 시간:" #: tools/virsh-domain.c:4564 #, fuzzy msgid "control or query domain vcpu affinity" msgstr "도메인 vcpu 동질 관계 제어" #: tools/virsh-domain.c:4565 msgid "Pin domain VCPUs to host physical CPUs." msgstr "도메인 VCPU를 물리적 호스트 CPU에 고정." #: tools/virsh-domain.c:4571 msgid "vcpu number" msgstr "vcpu 수" #: tools/virsh-domain.c:4573 tools/virsh-domain.c:4835 #, fuzzy msgid "host cpu number(s) to set, or omit option to query" msgstr "호스트 cpu 수 (콤마로 분리됨)" #: tools/virsh-domain.c:4663 msgid "vcpupin: Missing cpulist." msgstr "" #: tools/virsh-domain.c:4672 msgid "vcpupin: Invalid or missing vCPU number." msgstr "vcpupin: vCPU 숫자가 빠졌거나 잘못됨" #: tools/virsh-domain.c:4683 #, fuzzy msgid "vcpupin: failed to get domain information." msgstr "vcpupin: 도메인 정보를 얻어오는 데 실패했습니다." #: tools/virsh-domain.c:4689 msgid "vcpupin: Invalid vCPU number." msgstr "vcpupin: 잘못된 vCPU 번호." #: tools/virsh-domain.c:4708 tools/virsh-domain.c:4908 #, fuzzy msgid "CPU Affinity" msgstr "CPU 동질관계:" #: tools/virsh-domain.c:4758 tools/virsh-domain.c:4782 #: tools/virsh-domain.c:4949 tools/virsh-domain.c:4973 #, c-format msgid "Physical CPU %d doesn't exist." msgstr "물리적 CPU %d이(가) 존재하지 않음." #: tools/virsh-domain.c:4818 tools/virsh-domain.c:5005 #, fuzzy msgid "cpulist: Invalid format." msgstr "cpulist: 잘못된 포맷. 비어있음." #: tools/virsh-domain.c:4827 #, fuzzy msgid "control or query domain emulator affinity" msgstr "도메인 vcpu 동질 관계 제어" #: tools/virsh-domain.c:4828 #, fuzzy msgid "Pin domain emulator threads to host physical CPUs." msgstr "도메인 VCPU를 물리적 호스트 CPU에 고정." #: tools/virsh-domain.c:4884 msgid "emulatorpin: Missing cpulist." msgstr "" #: tools/virsh-domain.c:4908 msgid "emulator:" msgstr "" #: tools/virsh-domain.c:5014 msgid "change number of virtual CPUs" msgstr "가상 CPU 수 변경" #: tools/virsh-domain.c:5015 msgid "Change the number of virtual CPUs in the guest domain." msgstr "게스트 도메인의 가상 CPU의 갯수를 변경합니다." #: tools/virsh-domain.c:5021 msgid "number of virtual CPUs" msgstr "가상 CPU 수" #: tools/virsh-domain.c:5022 #, fuzzy msgid "set maximum limit on next boot" msgstr "최대 허용가능 다운타임을 설정" #: tools/virsh-domain.c:5064 #, fuzzy msgid "Invalid number of virtual CPUs" msgstr "가상 CPU 수" #: tools/virsh-domain.c:5087 msgid "--maximum must be used with --config only" msgstr "" #: tools/virsh-domain.c:5108 msgid "compare host CPU with a CPU described by an XML file" msgstr "호스트 CPU를 XML에 설명된 CPU와 비교" #: tools/virsh-domain.c:5109 msgid "compare CPU with host CPU" msgstr "CPU와 호스트 CPU를 비교" #: tools/virsh-domain.c:5114 msgid "file containing an XML CPU description" msgstr "XML CPU 설명을 포함하는 파일" #: tools/virsh-domain.c:5139 #, fuzzy, c-format msgid "Failed to read file '%s' to compare" msgstr "'%s' 파일 읽기 실패" #: tools/virsh-domain.c:5152 msgid "Can't create XML buffer to extract CPU element." msgstr "" #: tools/virsh-domain.c:5157 #, fuzzy msgid "Failed to extract CPU element snippet from domain XML." msgstr "도메인 %s의 메모리 통계를 얻는 데 실패했습니다" #: tools/virsh-domain.c:5163 #, c-format msgid "" "File '%s' does not contain a element or is not a valid domain or " "capabilities XML" msgstr "" #: tools/virsh-domain.c:5172 #, c-format msgid "CPU described in %s is incompatible with host CPU\n" msgstr "%s에 묘사된 CPU가 호스트 CPU와 호환되지 않습니다\n" #: tools/virsh-domain.c:5178 #, c-format msgid "CPU described in %s is identical to host CPU\n" msgstr "%s에 묘사된 CPU가 호스트 CPU와 동일합니다\n" #: tools/virsh-domain.c:5183 #, c-format msgid "Host CPU is a superset of CPU described in %s\n" msgstr "호스트 CPU가 %s에 묘사된 CPU의 상위집합입니다\n" #: tools/virsh-domain.c:5189 #, c-format msgid "Failed to compare host CPU with %s" msgstr "호스트 CPU를 %s와 비교하는 데 실패" #: tools/virsh-domain.c:5208 msgid "compute baseline CPU" msgstr "베이스라인 CPU 계산" #: tools/virsh-domain.c:5209 msgid "Compute baseline CPU for a set of given CPUs." msgstr "주어진 CPU들에 대한 베이스라인 CPU를 계산" #: tools/virsh-domain.c:5214 msgid "file containing XML CPU descriptions" msgstr "XML CPU 설명을 포함하는 파일" #: tools/virsh-domain.c:5261 #, c-format msgid "No host CPU specified in '%s'" msgstr "'%s'에 호스트 CPU가 지정되지 않았습니다" #: tools/virsh-domain.c:5274 #, fuzzy msgid "Failed to extract element" msgstr "스케줄러 이름을 얻는 데 실패" #: tools/virsh-domain.c:5312 msgid "show domain cpu statistics" msgstr "" #: tools/virsh-domain.c:5314 msgid "Display per-CPU and total statistics about the domain's CPUs" msgstr "" #: tools/virsh-domain.c:5320 msgid "Show total statistics only" msgstr "" #: tools/virsh-domain.c:5321 msgid "Show statistics from this CPU" msgstr "" #: tools/virsh-domain.c:5322 msgid "Number of shown CPUs at most" msgstr "" #: tools/virsh-domain.c:5371 #, fuzzy msgid "No per-CPU stats available" msgstr "구현된 JSON 구문분석기가 없습니다" #: tools/virsh-domain.c:5420 #, fuzzy msgid "No total stats available" msgstr "권한 설정 콜백이 제공되지 않았습니다." #: tools/virsh-domain.c:5431 #, fuzzy msgid "Total:\n" msgstr "전체" #: tools/virsh-domain.c:5460 #, fuzzy msgid "Failed to virDomainGetCPUStats()\n" msgstr "도메인 %s를 %s에 저장하기 실패" #: tools/virsh-domain.c:5470 msgid "create a domain from an XML file" msgstr "XML 파일에서 도메인 생성" #: tools/virsh-domain.c:5471 msgid "Create a domain." msgstr "도메인 생성" #: tools/virsh-domain.c:5476 tools/virsh-domain.c:5539 msgid "file containing an XML domain description" msgstr "XML 도메인 설명이 있는 파일" #: tools/virsh-domain.c:5515 #, c-format msgid "Domain %s created from %s\n" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh-domain.c:5523 #, c-format msgid "Failed to create domain from %s" msgstr "%s에서 도메인 생성하기 실패" #: tools/virsh-domain.c:5533 msgid "define (but don't start) a domain from an XML file" msgstr "XML 파일에서 도메인을 정의함 (시작하지는 않음)" #: tools/virsh-domain.c:5534 msgid "Define a domain." msgstr "도메인 정의" #: tools/virsh-domain.c:5564 #, c-format msgid "Domain %s defined from %s\n" msgstr "%s에서 정의된 도메인 %s\n" #: tools/virsh-domain.c:5568 #, c-format msgid "Failed to define domain from %s" msgstr "%s에서 도메인 정의하기 실패" #: tools/virsh-domain.c:5578 #, fuzzy msgid "destroy (stop) a domain" msgstr "도메인 강제 종료 " #: tools/virsh-domain.c:5580 msgid "Forcefully stop a given domain, but leave its resources intact." msgstr "" #: tools/virsh-domain.c:5586 msgid "terminate gracefully" msgstr "" #: tools/virsh-domain.c:5614 #, c-format msgid "Domain %s destroyed\n" msgstr "%s 도메인 강제 종료\n" #: tools/virsh-domain.c:5616 #, c-format msgid "Failed to destroy domain %s" msgstr "%s 도메인 강제 종료 실패 " #: tools/virsh-domain.c:5628 #, fuzzy msgid "show or set domain's description or title" msgstr "도메인 설명 구문 분석 실패" #: tools/virsh-domain.c:5629 msgid "Allows to show or modify description or title of a domain." msgstr "" #: tools/virsh-domain.c:5635 #, fuzzy msgid "modify/get running state" msgstr "도메인이 실행 상태가 아닙니다" #: tools/virsh-domain.c:5636 #, fuzzy msgid "modify/get persistent configuration" msgstr "도메인의 영구 설정을 변경할 수 없음" #: tools/virsh-domain.c:5637 #, fuzzy msgid "modify/get current state configuration" msgstr "도메인의 영구 설정을 변경할 수 없음" #: tools/virsh-domain.c:5638 #, fuzzy msgid "modify/get the title instead of description" msgstr "도메인 설명 구문 분석 실패" #: tools/virsh-domain.c:5639 #, fuzzy msgid "open an editor to modify the description" msgstr "도메인 설명 구문 분석 실패" #: tools/virsh-domain.c:5640 #, fuzzy msgid "message" msgstr "사용법" #: tools/virsh-domain.c:5702 #, fuzzy msgid "Failed to collect new description/title" msgstr "도메인 설명 구문 분석 실패" #: tools/virsh-domain.c:5738 #, fuzzy msgid "Domain description not changed.\n" msgstr "도메인 %s XML 설정이 변경되지 않았습니다.\n" #: tools/virsh-domain.c:5750 #, fuzzy msgid "Failed to set new domain description" msgstr "도메인 설명 구문 분석 실패" #: tools/virsh-domain.c:5753 #, fuzzy msgid "Domain description updated successfully" msgstr "장치가 성공적으로 부착되었습니다\n" #: tools/virsh-domain.c:5763 #, fuzzy, c-format msgid "No description for domain: %s" msgstr "%s상의 매체를 꺼내기할 수 없음" #: tools/virsh-domain.c:5784 #, fuzzy msgid "Inject NMI to the guest" msgstr "게스트 콘솔로 연결" #: tools/virsh-domain.c:5785 #, fuzzy msgid "Inject NMI to the guest domain." msgstr "게스트 콘솔로 연결" #: tools/virsh-domain.c:5817 #, fuzzy msgid "Send keycodes to the guest" msgstr "게스트 콘솔로 연결" #: tools/virsh-domain.c:5818 #, fuzzy msgid "Send keycodes (integers or symbolic names) to the guest" msgstr "게스트 콘솔로 연결" #: tools/virsh-domain.c:5825 msgid "the codeset of keycodes, default:linux" msgstr "" #: tools/virsh-domain.c:5827 msgid "the time (in milliseconds) how long the keys will be held" msgstr "" #: tools/virsh-domain.c:5828 msgid "the key code" msgstr "" #: tools/virsh-domain.c:5869 #, fuzzy, c-format msgid "unknown codeset: '%s'" msgstr "알려지지 않은 명령: '%s'" #: tools/virsh-domain.c:5875 msgid "too many keycodes" msgstr "" #: tools/virsh-domain.c:5881 #, fuzzy, c-format msgid "invalid keycode: '%s'" msgstr "잘못된 보안 모델 '%s'" #: tools/virsh-domain.c:5902 msgid "change memory allocation" msgstr "메모리 할당 변경" #: tools/virsh-domain.c:5903 msgid "Change the current memory allocation in the guest domain." msgstr "게스트 도메인에 있는 현재 메모리 할당을 변경." #: tools/virsh-domain.c:5911 msgid "new memory size, as scaled integer (default KiB)" msgstr "" #: tools/virsh-domain.c:5960 tools/virsh-domain.c:6041 msgid "memory size has to be a number" msgstr "" #: tools/virsh-domain.c:5984 msgid "change maximum memory limit" msgstr "최대 메모리 크기 제한 변경" #: tools/virsh-domain.c:5985 msgid "Change the maximum memory allocation limit in the guest domain." msgstr "게스트 도메인에서 최대 메모리 할당 제한 변경." #: tools/virsh-domain.c:5993 msgid "new maximum memory size, as scaled integer (default KiB)" msgstr "" #: tools/virsh-domain.c:6049 tools/virsh-domain.c:6054 msgid "Unable to change MaxMemorySize" msgstr "최대 메모리 크기를 변경할 수 없음" #: tools/virsh-domain.c:6067 #, fuzzy msgid "Get or set memory parameters" msgstr "스케줄러 매개 변수 보기/설정" #: tools/virsh-domain.c:6068 msgid "" "Get or set the current memory parameters for a guest domain.\n" " To get the memory parameters use following command: \n" "\n" " virsh # memtune " msgstr "" #: tools/virsh-domain.c:6078 msgid "Max memory, as scaled integer (default KiB)" msgstr "" #: tools/virsh-domain.c:6080 #, fuzzy msgid "Memory during contention, as scaled integer (default KiB)" msgstr "킬로바이트에서 최대 메모리 크기 제한" #: tools/virsh-domain.c:6082 #, fuzzy msgid "Max memory plus swap, as scaled integer (default KiB)" msgstr "킬로바이트에서 최대 메모리 크기 제한" #: tools/virsh-domain.c:6084 #, fuzzy msgid "Min guaranteed memory, as scaled integer (default KiB)" msgstr "킬로바이트에서 최대 메모리 크기 제한" #: tools/virsh-domain.c:6174 tools/virsh-domain.c:6344 #, fuzzy msgid "Unable to get number of memory parameters" msgstr "드라이버에 대한 cgroup을 얻을 수 없음" #: tools/virsh-domain.c:6187 #, fuzzy msgid "Unable to get memory parameters" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:6194 #, fuzzy msgid "unlimited" msgstr "무제한" #: tools/virsh-domain.c:6262 #, fuzzy msgid "Unable to change memory parameters" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:6270 #, fuzzy msgid "Get or set numa parameters" msgstr "스케줄러 매개 변수 보기/설정" #: tools/virsh-domain.c:6271 msgid "" "Get or set the current numa parameters for a guest domain.\n" " To get the numa parameters use following command: \n" "\n" " virsh # numatune " msgstr "" #: tools/virsh-domain.c:6282 msgid "NUMA mode, one of strict, preferred and interleave" msgstr "" #: tools/virsh-domain.c:6284 msgid "NUMA node selections to set" msgstr "" #: tools/virsh-domain.c:6326 #, fuzzy msgid "Unable to parse nodeset." msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:6333 #, fuzzy msgid "Unable to parse mode." msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:6357 #, fuzzy msgid "Unable to get numa parameters" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:6394 #, fuzzy, c-format msgid "Invalid mode: %s" msgstr "잘못된 포트: %s" #: tools/virsh-domain.c:6412 #, fuzzy msgid "Unable to change numa parameters" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-domain.c:6428 msgid "domain information in XML" msgstr "XML에 있는 도메인 정보" #: tools/virsh-domain.c:6429 msgid "Output the domain information as an XML dump to stdout." msgstr "XML 덤프로서의 도메인 정보를 표준 출력으로 출력." #: tools/virsh-domain.c:6435 tools/virsh-interface.c:320 #: tools/virsh-pool.c:550 msgid "show inactive defined XML" msgstr "비활성화로 정의된 XML을 보여줌" #: tools/virsh-domain.c:6437 #, fuzzy msgid "update guest CPU according to host CPU" msgstr "게스트 CPU가 호스트 CPU와 호환가능하지 않습니다" #: tools/virsh-domain.c:6481 msgid "Convert native config to domain XML" msgstr "네이티브 설정을 도메인 XML로 변환합니다" #: tools/virsh-domain.c:6482 msgid "Convert native guest configuration format to domain XML format." msgstr "네이티브 게스트 설정 형식을 도메인 XML 형식으로 변환합니다." #: tools/virsh-domain.c:6487 msgid "source config data format" msgstr "소스 설정 데이터 형식" #: tools/virsh-domain.c:6488 msgid "config data file to import from" msgstr "가져오기 할 설정 데이터 파일" #: tools/virsh-domain.c:6528 msgid "Convert domain XML to native config" msgstr "도메인 XML을 네이티브 설정으로 변환합니다" #: tools/virsh-domain.c:6529 msgid "Convert domain XML config to a native guest configuration format." msgstr "도메인 XML 설정을 네이티브 게스트 설정 형식으로 변환합니다." #: tools/virsh-domain.c:6534 msgid "target config data type format" msgstr "대상 설정 데이터 유형 형식" #: tools/virsh-domain.c:6535 msgid "xml data file to export from" msgstr "내보내기 할 xml 데이터 파일" #: tools/virsh-domain.c:6575 msgid "convert a domain id or UUID to domain name" msgstr "도메인 id 또는 UUID를 도메인명으로 변환" #: tools/virsh-domain.c:6581 msgid "domain id or uuid" msgstr "도메인 id 또는 uuid" #: tools/virsh-domain.c:6605 msgid "convert a domain name or UUID to domain id" msgstr "도메인명 또는 UUID를 도메인 id로 변환" #: tools/virsh-domain.c:6640 msgid "convert a domain name or id to domain UUID" msgstr "도메인명이나 id를 도메인 UUID로 변환" #: tools/virsh-domain.c:6646 msgid "domain id or name" msgstr "도메인 id 또는 도메인명" #: tools/virsh-domain.c:6665 msgid "failed to get domain UUID" msgstr "도메인 UUID 보기 실패 " #: tools/virsh-domain.c:6675 msgid "migrate domain to another host" msgstr "도메인을 다른 호스트로 이전" #: tools/virsh-domain.c:6676 msgid "Migrate domain to another host. Add --live for live migration." msgstr "다른 호스트로 도메인 이전. 실시간 이전일 경우 --live 추가." #: tools/virsh-domain.c:6681 msgid "live migration" msgstr "실시간 이전" #: tools/virsh-domain.c:6682 msgid "peer-2-peer migration" msgstr "피어간 이전" #: tools/virsh-domain.c:6683 msgid "direct migration" msgstr "직접 이전" #: tools/virsh-domain.c:6685 msgid "tunnelled migration" msgstr "터널링을 사용한 이전" #: tools/virsh-domain.c:6686 msgid "persist VM on destination" msgstr "목적지의 영구적인 VM" #: tools/virsh-domain.c:6687 msgid "undefine VM on source" msgstr "소스의 VM 정의를 없앰" #: tools/virsh-domain.c:6688 msgid "do not restart the domain on the destination host" msgstr "목적지 호스트의 도메인을 재시작하지 않음" #: tools/virsh-domain.c:6689 msgid "migration with non-shared storage with full disk copy" msgstr "" #: tools/virsh-domain.c:6690 msgid "" "migration with non-shared storage with incremental copy (same base image " "shared between source and destination)" msgstr "" #: tools/virsh-domain.c:6692 msgid "prevent any configuration changes to domain until migration ends)" msgstr "" #: tools/virsh-domain.c:6693 msgid "force migration even if it may be unsafe" msgstr "" #: tools/virsh-domain.c:6694 #, fuzzy msgid "display the progress of migration" msgstr "시스템 버전 정보 보여주기." #: tools/virsh-domain.c:6696 msgid "" "connection URI of the destination host as seen from the client(normal " "migration) or source(p2p migration)" msgstr "" #: tools/virsh-domain.c:6697 msgid "migration URI, usually can be omitted" msgstr "이전 URI, 주로 생략 가능" #: tools/virsh-domain.c:6698 msgid "rename to new name during migration (if supported)" msgstr "이전시 새 이름으로 변경(지원되는 경우에만)" #: tools/virsh-domain.c:6699 msgid "force guest to suspend if live migration exceeds timeout (in seconds)" msgstr "" #: tools/virsh-domain.c:6734 tools/virsh-pool.c:204 tools/virsh-pool.c:1023 #: tools/virsh-pool.c:1035 tools/virsh-volume.c:178 tools/virsh-volume.c:782 #, fuzzy msgid "missing argument" msgstr "root 요소가 빠" #: tools/virsh-domain.c:6772 #, fuzzy, c-format msgid "file '%s' doesn't exist" msgstr "'%s'가 존재하지 않습니다" #: tools/virsh-domain.c:6782 msgid "migrate: Unexpected migrateuri for peer2peer/direct migration" msgstr "이전: 피어간/직접 이전에서 예기치 않은 migrateuri입니다" #: tools/virsh-domain.c:6845 #, fuzzy msgid "migrate: Unexpected timeout for offline migration" msgstr "이전: 피어간/직접 이전에서 예기치 않은 migrateuri입니다" #: tools/virsh-domain.c:6874 #, fuzzy msgid "Migration" msgstr "실시간 이전" #: tools/virsh-domain.c:6889 msgid "set maximum tolerable downtime" msgstr "최대 허용가능 다운타임을 설정" #: tools/virsh-domain.c:6890 msgid "" "Set maximum tolerable downtime of a domain which is being live-migrated to " "another host." msgstr "다른 호스트로 라이브 이전할 도메인의 최대 허용 가능한 가동 중지 시간" #: tools/virsh-domain.c:6896 msgid "maximum tolerable downtime (in milliseconds) for migration" msgstr "이전을 위한 최대 허용 가능한 가동 중지 시간(밀리초 단위)" #: tools/virsh-domain.c:6915 msgid "migrate: Invalid downtime" msgstr "이전: 잘못된 다운타임" #: tools/virsh-domain.c:6933 #, fuzzy msgid "Set the maximum migration bandwidth" msgstr "최대 이전 다운타임을 설정할 수 없음" #: tools/virsh-domain.c:6934 #, fuzzy msgid "" "Set the maximum migration bandwidth (in MiB/s) for a domain which is being " "migrated to another host." msgstr "다른 호스트로 라이브 이전할 도메인의 최대 허용 가능한 가동 중지 시간" #: tools/virsh-domain.c:6942 #, fuzzy msgid "migration bandwidth limit in MiB/s" msgstr "모니터 명령 '%s'를 보낼 수 없음" #: tools/virsh-domain.c:6960 #, fuzzy msgid "migrate: Invalid bandwidth" msgstr "이전: 잘못된 다운타임" #: tools/virsh-domain.c:6978 #, fuzzy msgid "Get the maximum migration bandwidth" msgstr "최대 이전 다운타임을 설정할 수 없음" #: tools/virsh-domain.c:6979 #, fuzzy msgid "Get the maximum migration bandwidth (in MiB/s) for a domain." msgstr "다른 호스트로 라이브 이전할 도메인의 최대 허용 가능한 가동 중지 시간" #: tools/virsh-domain.c:7017 #, fuzzy msgid "domain display connection URI" msgstr "읽기 전용 연결" #: tools/virsh-domain.c:7018 #, fuzzy msgid "Output the IP address and port number for the graphical display." msgstr "VNC 화면의 IP 주소 및 포트 번호 출력" #: tools/virsh-domain.c:7024 msgid "includes the password into the connection URI if available" msgstr "" #: tools/virsh-domain.c:7168 #, fuzzy msgid "Failed to create display URI" msgstr "파이프 생성에 실패" #: tools/virsh-domain.c:7193 msgid "vnc display" msgstr "vnc 화면" #: tools/virsh-domain.c:7194 msgid "Output the IP address and port number for the VNC display." msgstr "VNC 화면의 IP 주소 및 포트 번호 출력" #: tools/virsh-domain.c:7235 #, fuzzy msgid "Failed to get VNC port. Is this domain using VNC?" msgstr "도메인 %s의 메모리 통계를 얻는 데 실패했습니다" #: tools/virsh-domain.c:7261 msgid "tty console" msgstr "tty 콘솔" #: tools/virsh-domain.c:7262 msgid "Output the device for the TTY console." msgstr "TTY 콘솔에 대한 장치 출력" #: tools/virsh-domain.c:7316 #, fuzzy msgid "print the domain's hostname" msgstr "하이퍼바이저 호스트명 인쇄" #: tools/virsh-domain.c:7341 tools/virsh-host.c:789 msgid "failed to get hostname" msgstr "호스트명 보기 실패" #: tools/virsh-domain.c:7431 tools/virsh-domain.c:7444 msgid "Bad child elements counting." msgstr "" #: tools/virsh-domain.c:7506 #, fuzzy, c-format msgid "couldn't get XML description of domain %s" msgstr "%s상의 매체를 꺼내기할 수 없음" #: tools/virsh-domain.c:7513 #, fuzzy msgid "Failed to parse domain definition xml" msgstr "도메인 설명 구문 분석 실패" #: tools/virsh-domain.c:7519 #, fuzzy msgid "Failed to parse device definition xml" msgstr "도메인 설명 구문 분석 실패" #: tools/virsh-domain.c:7541 #, fuzzy msgid "error when selecting nodes" msgstr "%s 주소 정보를 얻는 중 오류 발생" #: tools/virsh-domain.c:7570 #, fuzzy msgid "failed to create document saving context" msgstr "클라이언트 소켓 생성 실패" #: tools/virsh-domain.c:7605 msgid "detach device from an XML file" msgstr "XML 파일에서 분리 장치" #: tools/virsh-domain.c:7606 msgid "Detach device from an XML " msgstr "XML 파일에서의 분리 장치 " #: tools/virsh-domain.c:7652 #, c-format msgid "Failed to detach device from %s" msgstr "%s에서 장치 분리 실패" #: tools/virsh-domain.c:7656 msgid "Device detached successfully\n" msgstr "장치가 성공적으로 탈착되었습니다\n" #: tools/virsh-domain.c:7669 #, fuzzy msgid "update device from an XML file" msgstr "XML 파일에서 장치 부착" #: tools/virsh-domain.c:7670 #, fuzzy msgid "Update device from an XML ." msgstr "XML 파일에서 장치 부착 ." #: tools/virsh-domain.c:7679 #, fuzzy msgid "force device update" msgstr "영구적인 장치 부착" #: tools/virsh-domain.c:7724 #, fuzzy, c-format msgid "Failed to update device from %s" msgstr "%s에서 장치 부착하기 실패" #: tools/virsh-domain.c:7739 msgid "detach network interface" msgstr "네트워크 인터페이스 분리" #: tools/virsh-domain.c:7740 msgid "Detach network interface." msgstr "네트워크 인터페이스 분리" #: tools/virsh-domain.c:7791 msgid "Failed to get interface information" msgstr "인터페이스 정보 보기 실패" #: tools/virsh-domain.c:7799 #, c-format msgid "No found interface whose type is %s" msgstr "유형이 %s인 인터페이스를 찾을 수 없음" #: tools/virsh-domain.c:7804 #, c-format msgid "" "Domain has %d interfaces. Please specify which one to detach using --mac" msgstr "" #: tools/virsh-domain.c:7828 #, c-format msgid "No found interface whose MAC address is %s" msgstr "MAC 주소가 %s인 인터페이스를 찾을 수 없음" #: tools/virsh-domain.c:7855 msgid "Failed to detach interface" msgstr "인터페이스 탈착 실패" #: tools/virsh-domain.c:7857 msgid "Interface detached successfully\n" msgstr "인터페이스가 성공적으로 탈착되었습니다\n" #: tools/virsh-domain.c:7895 tools/virsh-domain.c:7904 msgid "Failed to get disk information" msgstr "디스크 정보 보기 실패" #: tools/virsh-domain.c:7957 #, fuzzy, c-format msgid "No found disk whose source path or target is %s" msgstr "대상이 %s인 디스크를 찾을 수 없음" #: tools/virsh-domain.c:8019 #, fuzzy, c-format msgid "The disk device '%s' doesn't have media" msgstr "udev가 장치 '%s'에는 특성 '%s'가 없다고 보고합니다" #: tools/virsh-domain.c:8030 #, fuzzy msgid "No source is specified for inserting media" msgstr "이름이 '%s'와 일치하는 노드 디바이스가 없음" #: tools/virsh-domain.c:8033 #, fuzzy msgid "No source is specified for updating media" msgstr "이름이 '%s'와 일치하는 노드 디바이스가 없음" #: tools/virsh-domain.c:8040 #, fuzzy, c-format msgid "The disk device '%s' already has media" msgstr "타겟 %s가 이미 존재합니다" #: tools/virsh-domain.c:8091 msgid "detach disk device" msgstr "디스크 장치 분리" #: tools/virsh-domain.c:8092 msgid "Detach disk device." msgstr "디스크 장치 분리" #: tools/virsh-domain.c:8148 msgid "Failed to detach disk" msgstr "디스크 탈착 실패" #: tools/virsh-domain.c:8150 msgid "Disk detached successfully\n" msgstr "디스크가 성공적으로 탈착되었습니다\n" #: tools/virsh-domain.c:8167 msgid "edit XML configuration for a domain" msgstr "도메인을 위한 XML 설정 편집" #: tools/virsh-domain.c:8168 msgid "Edit the XML configuration for a domain." msgstr "도메인을 위한 XML 설정 편집" #: tools/virsh-domain.c:8194 #, c-format msgid "Domain %s XML configuration not changed.\n" msgstr "도메인 %s XML 설정이 변경되지 않았습니다.\n" #: tools/virsh-domain.c:8204 #, c-format msgid "Domain %s XML configuration edited.\n" msgstr "도메인 %s XML 설정이 편집되었습니다.\n" #: tools/virsh-domain.c:8222 msgid "Change media of CD or floppy drive" msgstr "" #: tools/virsh-domain.c:8223 msgid "Change media of CD or floppy drive." msgstr "" #: tools/virsh-domain.c:8229 #, fuzzy msgid "Fully-qualified path or target of disk device" msgstr "디스크 장치의 대상" #: tools/virsh-domain.c:8231 #, fuzzy msgid "source of the media" msgstr "디스크 장치의 소스" #: tools/virsh-domain.c:8232 msgid "Eject the media" msgstr "" #: tools/virsh-domain.c:8233 msgid "Insert the media" msgstr "" #: tools/virsh-domain.c:8234 msgid "Update the media" msgstr "" #: tools/virsh-domain.c:8235 msgid "" "can be either or both of --live and --config, depends on implementation of " "hypervisor driver" msgstr "" #: tools/virsh-domain.c:8237 #, fuzzy msgid "alter live configuration of running domain" msgstr "도메인을 위한 XML 설정 편집" #: tools/virsh-domain.c:8238 msgid "alter persistent configuration, effect observed on next boot" msgstr "" #: tools/virsh-domain.c:8239 msgid "force media changing" msgstr "" #: tools/virsh-domain.c:8268 #, fuzzy msgid "--eject, --insert, and --update must be specified exclusively." msgstr "장치 주소 유형이 지정되지 않았습니다" #: tools/virsh-domain.c:8317 #, fuzzy msgid "No disk source specified for inserting" msgstr "디스크 원본 경로가 빠졌습니다" #: tools/virsh-domain.c:8335 #, fuzzy, c-format msgid "Failed to complete action %s on media" msgstr "polkit 동작 %s을 생성하는 데 실패했습니다" #: tools/virsh-domain.c:8339 #, c-format msgid "succeeded to complete action %s on media\n" msgstr "" #: tools/virsh-edit.c:109 #, fuzzy msgid "The XML configuration was changed by another user." msgstr "오류: XML 설정이 다른 사용자에 의해 변경되었습니다" #: tools/virsh-edit.c:118 #, fuzzy msgid "Failed." msgstr "popen 실패" #: tools/virsh-host.c:45 msgid "capabilities" msgstr "기능" #: tools/virsh-host.c:46 msgid "Returns capabilities of hypervisor/driver." msgstr "하이퍼바이저/드라이버 기능으로 전환" #: tools/virsh-host.c:59 msgid "failed to get capabilities" msgstr "기능 전환 실패" #: tools/virsh-host.c:72 msgid "(re)connect to hypervisor" msgstr "하이퍼바이저로 (재)연결" #: tools/virsh-host.c:74 msgid "" "Connect to local hypervisor. This is built-in command after shell start up." msgstr "로컬 하이퍼바이저로 연결. 이는 쉘을 시작한 후에 내장된 명령임" #: tools/virsh-host.c:80 msgid "hypervisor connection URI" msgstr "하이퍼바이저 연결 URI" #: tools/virsh-host.c:81 msgid "read-only connection" msgstr "읽기 전용 연결" #: tools/virsh-host.c:102 #, fuzzy msgid "Please specify valid connection URI" msgstr "하이퍼바이저 연결 URI" #: tools/virsh-host.c:115 msgid "Failed to connect to the hypervisor" msgstr "하이퍼바이저에 연결하기 실패" #: tools/virsh-host.c:124 msgid "NUMA free memory" msgstr "NUMA 가용 메모리" #: tools/virsh-host.c:125 msgid "display available free memory for the NUMA cell." msgstr "NUMA 셀의 가용 메모리를 표시합니다" #: tools/virsh-host.c:130 msgid "NUMA cell number" msgstr "NUMA 셀 번호" #: tools/virsh-host.c:131 #, fuzzy msgid "show free memory for all NUMA cells" msgstr "NUMA 셀의 가용 메모리를 표시합니다" #: tools/virsh-host.c:157 msgid "cell number has to be a number" msgstr "" #: tools/virsh-host.c:163 msgid "--cellno and --all are mutually exclusive. Please choose only one." msgstr "" #: tools/virsh-host.c:171 tools/virsh-host.c:177 #, fuzzy msgid "unable to get node capabilities" msgstr "기능 전환 실패" #: tools/virsh-host.c:175 #, fuzzy msgid "(capabilities)" msgstr "기능" #: tools/virsh-host.c:184 #, fuzzy msgid "could not get information about NUMA topology" msgstr "XML로 된 볼륨 정보" #: tools/virsh-host.c:196 #, fuzzy msgid "conversion from string failed" msgstr "sexpr2string 실패" #: tools/virsh-host.c:204 #, fuzzy, c-format msgid "failed to get free memory for NUMA node number: %lu" msgstr "버퍼 메모리 할당에 실패했습니다" #: tools/virsh-host.c:218 tools/virsh-host.c:231 msgid "Total" msgstr "전체" #: tools/virsh-host.c:252 msgid "node information" msgstr "노드 정보" #: tools/virsh-host.c:253 msgid "Returns basic information about the node." msgstr "노드에 관한 기본 정보 보기" #: tools/virsh-host.c:266 msgid "failed to get node information" msgstr "노드 정보 보기 실패" #: tools/virsh-host.c:269 msgid "CPU model:" msgstr "CPU 모델:" #: tools/virsh-host.c:271 msgid "CPU frequency:" msgstr "CPU 주파수:" #: tools/virsh-host.c:272 msgid "CPU socket(s):" msgstr "CPU 소켓:" #: tools/virsh-host.c:273 msgid "Core(s) per socket:" msgstr "소켓당 코어:" #: tools/virsh-host.c:274 msgid "Thread(s) per core:" msgstr "코어당 스레드:" #: tools/virsh-host.c:275 msgid "NUMA cell(s):" msgstr "NUMA cell:" #: tools/virsh-host.c:276 msgid "Memory size:" msgstr "메모리 용량:" #: tools/virsh-host.c:285 msgid "Prints cpu stats of the node." msgstr "" #: tools/virsh-host.c:286 msgid "Returns cpu stats of the node, in nanoseconds." msgstr "" #: tools/virsh-host.c:291 msgid "prints specified cpu statistics only." msgstr "" #: tools/virsh-host.c:292 msgid "prints by percentage during 1 second." msgstr "" #: tools/virsh-host.c:320 #, fuzzy msgid "Invalid value of cpuNum" msgstr "잘못된 캡 값" #: tools/virsh-host.c:326 #, fuzzy msgid "Unable to get number of cpu stats" msgstr "드라이버에 대한 cgroup을 얻을 수 없음" #: tools/virsh-host.c:342 #, fuzzy msgid "Unable to get node cpu stats" msgstr "기능 전환 실패" #: tools/virsh-host.c:369 tools/virsh-host.c:392 msgid "user:" msgstr "" #: tools/virsh-host.c:370 tools/virsh-host.c:394 msgid "system:" msgstr "" #: tools/virsh-host.c:371 tools/virsh-host.c:379 tools/virsh-host.c:396 #, fuzzy msgid "idle:" msgstr "유휴상태" #: tools/virsh-host.c:372 tools/virsh-host.c:398 msgid "iowait:" msgstr "" #: tools/virsh-host.c:378 tools/virsh-host.c:390 #, fuzzy msgid "usage:" msgstr "사용법" #: tools/virsh-host.c:413 msgid "Prints memory stats of the node." msgstr "" #: tools/virsh-host.c:414 msgid "Returns memory stats of the node, in kilobytes." msgstr "" #: tools/virsh-host.c:419 msgid "prints specified cell statistics only." msgstr "" #: tools/virsh-host.c:436 #, fuzzy msgid "Invalid value of cellNum" msgstr "잘못된 캡 값" #: tools/virsh-host.c:443 #, fuzzy msgid "Unable to get number of memory stats" msgstr "드라이버에 대한 cgroup을 얻을 수 없음" #: tools/virsh-host.c:456 #, fuzzy msgid "Unable to get memory stats" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-host.c:474 msgid "suspend the host node for a given time duration" msgstr "" #: tools/virsh-host.c:475 msgid "" "Suspend the host node for a given time duration and attempt to resume " "thereafter." msgstr "" #: tools/virsh-host.c:483 #, fuzzy msgid "Suspend duration in seconds, at least 60" msgstr "일시정지 동작이 실패했습니다" #: tools/virsh-host.c:484 msgid "Suspend flags, 0 for default" msgstr "" #: tools/virsh-host.c:510 #, fuzzy msgid "Invalid flags argument" msgstr "잘못된 인수" #: tools/virsh-host.c:526 #, fuzzy msgid "Invalid duration" msgstr "잘못된 매개변수 갯수" #: tools/virsh-host.c:532 #, fuzzy msgid "The host was not suspended" msgstr "도메인 %s가 중지됨\n" #: tools/virsh-host.c:542 tools/virsh-host.c:543 #, fuzzy msgid "QEMU Monitor Command" msgstr "모니터 명령 '%s'를 보낼 수 없음" #: tools/virsh-host.c:549 msgid "command is in human monitor protocol" msgstr "" #: tools/virsh-host.c:550 tools/virsh-host.c:664 #, fuzzy msgid "command" msgstr "" "명령:\n" "\n" #: tools/virsh-host.c:580 tools/virsh-host.c:696 #, fuzzy msgid "Failed to collect command" msgstr "QEMU 명령 '%s'를 실행할 수 없음" #: tools/virsh-host.c:608 tools/virsh-host.c:609 msgid "QEMU Attach" msgstr "" #: tools/virsh-host.c:614 msgid "pid" msgstr "" #: tools/virsh-host.c:630 #, fuzzy msgid "missing pid value" msgstr "CPU 모델 이름이 빠져있습니다" #: tools/virsh-host.c:638 #, fuzzy, c-format msgid "Domain %s attached to pid %u\n" msgstr "도메인 %s는 %s에 저장됨\n" #: tools/virsh-host.c:643 #, fuzzy, c-format msgid "Failed to attach to pid %u" msgstr "디스크 부착 성공" #: tools/virsh-host.c:654 #, fuzzy msgid "QEMU Guest Agent Command" msgstr "모니터 명령 '%s'를 보낼 수 없음" #: tools/virsh-host.c:655 msgid "Run an arbitrary qemu guest agent command; use at your own risk" msgstr "" #: tools/virsh-host.c:661 msgid "timeout seconds. must be positive." msgstr "" #: tools/virsh-host.c:662 msgid "execute command without waiting for timeout" msgstr "" #: tools/virsh-host.c:663 msgid "execute command without timeout" msgstr "" #: tools/virsh-host.c:703 msgid "timeout number has to be a number" msgstr "" #: tools/virsh-host.c:709 msgid "timeout must be positive" msgstr "" #: tools/virsh-host.c:723 msgid "timeout, async and block options are exclusive" msgstr "" #: tools/virsh-host.c:744 #, fuzzy msgid "print the hypervisor sysinfo" msgstr "하이퍼바이저 호스트명 인쇄" #: tools/virsh-host.c:746 msgid "output an XML string for the hypervisor sysinfo, if available" msgstr "" #: tools/virsh-host.c:760 #, fuzzy msgid "failed to get sysinfo" msgstr "호스트명 보기 실패" #: tools/virsh-host.c:774 msgid "print the hypervisor hostname" msgstr "하이퍼바이저 호스트명 인쇄" #: tools/virsh-host.c:803 msgid "print the hypervisor canonical URI" msgstr "하이퍼바이저 정규 URI 인쇄" #: tools/virsh-host.c:818 msgid "failed to get URI" msgstr "URI 보기 실패" #: tools/virsh-host.c:832 msgid "show version" msgstr "버전 보여주기" #: tools/virsh-host.c:833 msgid "Display the system version information." msgstr "시스템 버전 정보 보여주기." #: tools/virsh-host.c:838 msgid "report daemon version too" msgstr "" #: tools/virsh-host.c:861 msgid "failed to get hypervisor type" msgstr "하이퍼바이저 유형 보기 실패" #: tools/virsh-host.c:870 #, fuzzy, c-format msgid "Compiled against library: libvirt %d.%d.%d\n" msgstr "라이브러리에 대해 컴파일됨: libvir %d.%d.%d\n" #: tools/virsh-host.c:875 msgid "failed to get the library version" msgstr "라이브러리 버전 보기 실패" #: tools/virsh-host.c:882 #, fuzzy, c-format msgid "Using library: libvirt %d.%d.%d\n" msgstr "사용중인 라이브러리: libvir %d.%d.%d\n" #: tools/virsh-host.c:889 #, c-format msgid "Using API: %s %d.%d.%d\n" msgstr "사용중인 API: %s %d.%d.%d\n" #: tools/virsh-host.c:894 msgid "failed to get the hypervisor version" msgstr "하이퍼바이저 버전 보기 실패" #: tools/virsh-host.c:899 #, c-format msgid "Cannot extract running %s hypervisor version\n" msgstr "실행중인 %s 하이퍼바이저 버전을 추출할 수 없음\n" #: tools/virsh-host.c:906 #, c-format msgid "Running hypervisor: %s %d.%d.%d\n" msgstr "실행중인 하이퍼바이저: %s %d.%d.%d\n" #: tools/virsh-host.c:913 #, fuzzy msgid "failed to get the daemon version" msgstr "라이브러리 버전 보기 실패" #: tools/virsh-host.c:919 #, fuzzy, c-format msgid "Running against daemon: %d.%d.%d\n" msgstr "실행중인 하이퍼바이저: %s %d.%d.%d\n" #: tools/virsh-interface.c:77 #, c-format msgid "failed to get interface '%s'" msgstr "인터페이스 '%s'를 가져오는 데 실패" #: tools/virsh-interface.c:86 msgid "edit XML configuration for a physical host interface" msgstr "물리적 호스트 인터페이스에 대한 XML 설정을 편집" #: tools/virsh-interface.c:87 msgid "Edit the XML configuration for a physical host interface." msgstr "물리적 호스트 인터페이스에 대한 XML 설정을 편집합니다." #: tools/virsh-interface.c:92 tools/virsh-interface.c:319 #: tools/virsh-interface.c:409 tools/virsh-interface.c:447 #: tools/virsh-interface.c:485 msgid "interface name or MAC address" msgstr "인터페이스 이름 또는 MAC 주소" #: tools/virsh-interface.c:113 #, c-format msgid "Interface %s XML configuration not changed.\n" msgstr "인터페이스 %s XML 설정이 변경되지 않았습니다.\n" #: tools/virsh-interface.c:123 #, c-format msgid "Interface %s XML configuration edited.\n" msgstr "인터페이스 %s XML 설정이 편집되었습니다.\n" #: tools/virsh-interface.c:141 msgid "list physical host interfaces" msgstr "물리적 호스트 인터페이스 목록" #: tools/virsh-interface.c:142 msgid "Returns list of physical host interfaces." msgstr "물리적 호스트 인터페이스 목록 반환" #: tools/virsh-interface.c:147 msgid "list inactive interfaces" msgstr "비활성화 인터페이스 목록" #: tools/virsh-interface.c:148 msgid "list inactive & active interfaces" msgstr "비활성화 & 활성화 인터페이스 목록" #: tools/virsh-interface.c:167 tools/virsh-interface.c:175 msgid "Failed to list active interfaces" msgstr "활성화된 인터페이스 목록 얻기 실패" #: tools/virsh-interface.c:186 tools/virsh-interface.c:196 msgid "Failed to list inactive interfaces" msgstr "비활성화된 호스트 인터페이스 목록 얻기 실패" #: tools/virsh-interface.c:206 msgid "MAC Address" msgstr "MAC 주소" #: tools/virsh-interface.c:221 tools/virsh-network.c:455 #: tools/virsh-pool.c:813 msgid "active" msgstr "활성화" #: tools/virsh-interface.c:238 tools/virsh-network.c:478 #: tools/virsh-pool.c:738 tools/virsh-pool.c:811 tools/virsh-pool.c:1160 msgid "inactive" msgstr "비활성화" #: tools/virsh-interface.c:253 msgid "convert an interface MAC address to interface name" msgstr "인터페이스 MAC 주소를 인터페이스 이름으로 변환합니다" #: tools/virsh-interface.c:259 msgid "interface mac" msgstr "인터페이스 MAC" #: tools/virsh-interface.c:283 msgid "convert an interface name to interface MAC address" msgstr "인터페이스 이름을 인터페이스 MAC 주소로 변환합니다" #: tools/virsh-interface.c:289 msgid "interface name" msgstr "인터페이스 이름" #: tools/virsh-interface.c:313 msgid "interface information in XML" msgstr "XML에 있는 인터페이스 정보" #: tools/virsh-interface.c:314 msgid "" "Output the physical host interface information as an XML dump to stdout." msgstr "" "물리적 호스트 인터페이스 정보를 XML 덤프 형식으로 표준 출력에 표시합니다" #: tools/virsh-interface.c:358 msgid "define (but don't start) a physical host interface from an XML file" msgstr "XML 파일에서 물리적 호스트 인터페이스를 정의(그렇지만 시작하지는 않음)" #: tools/virsh-interface.c:359 msgid "Define a physical host interface." msgstr "물리적 호스트 인터페이스를 정의합니다." #: tools/virsh-interface.c:364 msgid "file containing an XML interface description" msgstr "XML 인터페이스 설명이 있는 파일" #: tools/virsh-interface.c:389 #, c-format msgid "Interface %s defined from %s\n" msgstr "인터페이스 %s(%s에서 정의됨)\n" #: tools/virsh-interface.c:393 #, c-format msgid "Failed to define interface from %s" msgstr "%s에서 인터페이스 정의하기 실패" #: tools/virsh-interface.c:403 msgid "undefine a physical host interface (remove it from configuration)" msgstr "물리적 호스트 인터페이스의 정의를 없앱니다(설정에서 제거)" #: tools/virsh-interface.c:404 msgid "undefine an interface." msgstr "인터페이스 정의를 해제" #: tools/virsh-interface.c:427 #, c-format msgid "Interface %s undefined\n" msgstr "인터페이스 %s가 정의되지 않았습니다\n" #: tools/virsh-interface.c:429 #, c-format msgid "Failed to undefine interface %s" msgstr "인터페이스 %s 정의를 해제하는 데 실패" #: tools/virsh-interface.c:441 msgid "start a physical host interface (enable it / \"if-up\")" msgstr "물리적 호스트 인터페이스를 시작합니다(활성화 / \"if-up\")" #: tools/virsh-interface.c:442 msgid "start a physical host interface." msgstr "물리적 호스트 인터페이스를 시작합니다." #: tools/virsh-interface.c:465 tools/virsh-interface.c:994 #, c-format msgid "Interface %s started\n" msgstr "인터페이스 %s가 시작되었습니다\n" #: tools/virsh-interface.c:467 tools/virsh-interface.c:991 #, c-format msgid "Failed to start interface %s" msgstr "인터페이스 %s의 시작이 실패" #: tools/virsh-interface.c:479 msgid "destroy a physical host interface (disable it / \"if-down\")" msgstr "물리적 호스트 인터페이스를 파괴합니다(비활성화 / \"if-down\")" #: tools/virsh-interface.c:480 #, fuzzy msgid "forcefully stop a physical host interface." msgstr "물리적 호스트 인터페이스를 파괴합니다." #: tools/virsh-interface.c:503 #, c-format msgid "Interface %s destroyed\n" msgstr "인터페이스 %s가 파괴되었습니다\n" #: tools/virsh-interface.c:505 #, c-format msgid "Failed to destroy interface %s" msgstr "인터페이스 %s를 파괴하는 데 실패" #: tools/virsh-interface.c:517 msgid "" "create a snapshot of current interfaces settings, which can be later " "committed (iface-commit) or restored (iface-rollback)" msgstr "" #: tools/virsh-interface.c:520 msgid "Create a restore point for interfaces settings" msgstr "" #: tools/virsh-interface.c:535 #, fuzzy msgid "Failed to begin network config change transaction" msgstr "%s에서 네트워크 정의하기 실패" #: tools/virsh-interface.c:539 #, fuzzy msgid "Network config change transaction started\n" msgstr "자동 시작으로 %s 네트워크가 표시됨\n" #: tools/virsh-interface.c:547 msgid "commit changes made since iface-begin and free restore point" msgstr "" #: tools/virsh-interface.c:548 msgid "commit changes and free restore point" msgstr "" #: tools/virsh-interface.c:563 #, fuzzy msgid "Failed to commit network config change transaction" msgstr "%s 네트워크 시작 실패" #: tools/virsh-interface.c:567 msgid "Network config change transaction committed\n" msgstr "" #: tools/virsh-interface.c:575 msgid "rollback to previous saved configuration created via iface-begin" msgstr "" #: tools/virsh-interface.c:576 msgid "rollback to previous restore point" msgstr "" #: tools/virsh-interface.c:591 #, fuzzy msgid "Failed to rollback network config change transaction" msgstr "%s 네트워크 시작 실패" #: tools/virsh-interface.c:595 msgid "Network config change transaction rolled back\n" msgstr "" #: tools/virsh-interface.c:603 #, fuzzy msgid "create a bridge device and attach an existing network device to it" msgstr "그래픽 장치를 추출할 수 없음" #: tools/virsh-interface.c:604 #, fuzzy msgid "bridge an existing network device" msgstr "그래픽 장치를 추출할 수 없음" #: tools/virsh-interface.c:609 #, fuzzy msgid "existing interface name" msgstr "인터페이스 파일 이름 찾는 중" #: tools/virsh-interface.c:610 #, fuzzy msgid "new bridge device name" msgstr "너무 긴 브리지 장치 이름" #: tools/virsh-interface.c:611 #, fuzzy msgid "do not enable STP for this bridge" msgstr "IP 포워딩을 활성화하는 데 실패" #: tools/virsh-interface.c:613 msgid "number of seconds to squelch traffic on newly connected ports" msgstr "" #: tools/virsh-interface.c:614 msgid "don't start the bridge immediately" msgstr "" #: tools/virsh-interface.c:645 #, fuzzy msgid "Missing bridge device name in command" msgstr "너무 긴 브리지 장치 이름" #: tools/virsh-interface.c:651 #, fuzzy, c-format msgid "Network device %s already exists" msgstr "타겟 %s가 이미 존재합니다" #: tools/virsh-interface.c:659 #, fuzzy msgid "Unable to parse delay parameter" msgstr "devaddr 매개변수 '%s'를 구문분석 할 수 없음" #: tools/virsh-interface.c:669 #, fuzzy msgid "(interface definition)" msgstr "인터페이스 장치" #: tools/virsh-interface.c:670 tools/virsh-interface.c:868 #, fuzzy, c-format msgid "Failed to parse configuration of %s" msgstr "%s 설정 파일 구문 분석 실패" #: tools/virsh-interface.c:677 tools/virsh-interface.c:875 #, fuzzy, c-format msgid "Existing device %s has no type" msgstr "입력 장치 타입 빠짐" #: tools/virsh-interface.c:682 #, fuzzy, c-format msgid "Existing device %s is already a bridge" msgstr "장치 %s가 이미 사용중입니다" #: tools/virsh-interface.c:689 tools/virsh-interface.c:888 #, fuzzy, c-format msgid "Interface name from config %s doesn't match given supplied name %s" msgstr "저장 풀(pool) 설정 파일이름 '%s'는 풀 이름 '%s'에 부합되지 않습니다" #: tools/virsh-interface.c:696 #, fuzzy msgid "Failed to create bridge node in xml document" msgstr "xml 문서 구문분석 실패" #: tools/virsh-interface.c:704 #, fuzzy msgid "Failed to set stp attribute in xml document" msgstr "xml 문서 구문분석 실패" #: tools/virsh-interface.c:711 #, fuzzy, c-format msgid "Failed to set bridge delay %d in xml document" msgstr "xml 문서 구문분석 실패" #: tools/virsh-interface.c:719 #, fuzzy msgid "Failed to set bridge interface type to 'bridge' in xml document" msgstr "브리지 인터페이스에 bridge 요소가 빠졌습니다" #: tools/virsh-interface.c:724 #, c-format msgid "Failed to set master bridge interface name to '%s' in xml document" msgstr "" #: tools/virsh-interface.c:733 #, fuzzy msgid "Failed to create interface node under bridge node in xml document" msgstr "브리지에 탭 인터페이스를 추가하는 데 실패. %s는 브리지 장치가 아닙니다" #: tools/virsh-interface.c:741 #, fuzzy, c-format msgid "Failed to set new slave interface type to '%s' in xml document" msgstr "xml 문서 구문분석 실패" #: tools/virsh-interface.c:747 #, c-format msgid "Failed to set new slave interface name to '%s' in xml document" msgstr "" #: tools/virsh-interface.c:767 tools/virsh-interface.c:950 #, fuzzy, c-format msgid "Failed to move '%s' element in xml document" msgstr "xml 문서 구문분석 실패" #: tools/virsh-interface.c:778 #, fuzzy, c-format msgid "Failed to format new xml document for bridge %s" msgstr "'%s' 브리지에 탭 인터페이스를 추가하는 데 실패" #: tools/virsh-interface.c:787 #, fuzzy, c-format msgid "Failed to define new bridge interface %s" msgstr "인터페이스 %s 정의를 해제하는 데 실패" #: tools/virsh-interface.c:792 #, fuzzy, c-format msgid "Created bridge %s with attached device %s\n" msgstr "장치 %s 재부착 실패" #: tools/virsh-interface.c:798 #, fuzzy, c-format msgid "Failed to start bridge interface %s" msgstr "인터페이스 %s의 시작이 실패" #: tools/virsh-interface.c:801 #, fuzzy, c-format msgid "Bridge interface %s started\n" msgstr "인터페이스 %s가 시작되었습니다\n" #: tools/virsh-interface.c:824 msgid "undefine a bridge device after detaching its slave device" msgstr "" #: tools/virsh-interface.c:825 #, fuzzy msgid "unbridge a network device" msgstr "정의되지 않은 네트워크 이름" #: tools/virsh-interface.c:830 #, fuzzy msgid "current bridge device name" msgstr "너무 긴 브리지 장치 이름" #: tools/virsh-interface.c:832 msgid "don't start the un-slaved interface immediately (not recommended)" msgstr "" #: tools/virsh-interface.c:866 #, fuzzy msgid "(bridge interface definition)" msgstr "인터페이스 장치" #: tools/virsh-interface.c:880 #, fuzzy, c-format msgid "Device %s is not a bridge" msgstr "장치 유형 '%s'가 정수가 아닙니다" #: tools/virsh-interface.c:896 #, fuzzy msgid "No bridge node in xml document" msgstr "xml 문서 구문분석 실패" #: tools/virsh-interface.c:901 #, fuzzy msgid "Multiple interfaces attached to bridge" msgstr "동일한 MAC 주소에 인터페이스가 여러개 있음" #: tools/virsh-interface.c:906 #, fuzzy msgid "No interface attached to bridge" msgstr "영구적인 인터페이스 부착" #: tools/virsh-interface.c:914 #, c-format msgid "Device attached to bridge %s has no name" msgstr "" #: tools/virsh-interface.c:919 #, fuzzy, c-format msgid "Attached device %s has no type" msgstr "대상 장치 유형" #: tools/virsh-interface.c:924 #, fuzzy, c-format msgid "Failed to set interface type to '%s' in xml document" msgstr "%s %s 인터페이스 상태 보기 실패" #: tools/virsh-interface.c:930 #, fuzzy, c-format msgid "Failed to set interface name to '%s' in xml document" msgstr "%s %s 인터페이스 상태 보기 실패" #: tools/virsh-interface.c:961 #, fuzzy, c-format msgid "Failed to format new xml document for un-enslaved interface %s" msgstr "인터페이스 %s 정의를 해제하는 데 실패" #: tools/virsh-interface.c:970 #, fuzzy, c-format msgid "Failed to destroy bridge interface %s" msgstr "인터페이스 %s를 파괴하는 데 실패" #: tools/virsh-interface.c:974 #, fuzzy, c-format msgid "Failed to undefine bridge interface %s" msgstr "인터페이스 %s 정의를 해제하는 데 실패" #: tools/virsh-interface.c:981 #, fuzzy, c-format msgid "Failed to define new interface %s" msgstr "인터페이스 %s 정의를 해제하는 데 실패" #: tools/virsh-interface.c:985 #, fuzzy, c-format msgid "Device %s un-attached from bridge %s\n" msgstr "장치 %s가 재부착되었습니다\n" #: tools/virsh-network.c:75 #, c-format msgid "failed to get network '%s'" msgstr "'%s' 네트워크 보기 실패" #: tools/virsh-network.c:84 msgid "autostart a network" msgstr "네트워크 자동 시작" #: tools/virsh-network.c:86 msgid "Configure a network to be automatically started at boot." msgstr "부팅 시 자동으로 시작하기 위해 네트워크 설정" #: tools/virsh-network.c:91 tools/virsh-network.c:229 #: tools/virsh-network.c:267 tools/virsh-network.c:314 #: tools/virsh-network.c:529 tools/virsh-network.c:566 #: tools/virsh-network.c:640 msgid "network name or uuid" msgstr "네트워크 이름 또는 uuid" #: tools/virsh-network.c:113 #, c-format msgid "failed to mark network %s as autostarted" msgstr "자동 시작으로 %s 네트워크를 표시하기 실패" #: tools/virsh-network.c:115 #, c-format msgid "failed to unmark network %s as autostarted" msgstr "자동 시작으로 %s 네트워크를 표시 해제하기 실패" #: tools/virsh-network.c:121 #, c-format msgid "Network %s marked as autostarted\n" msgstr "자동 시작으로 %s 네트워크가 표시됨\n" #: tools/virsh-network.c:123 #, c-format msgid "Network %s unmarked as autostarted\n" msgstr "자동 시작으로 %s 네트워크를 표시하지 않음\n" #: tools/virsh-network.c:133 msgid "create a network from an XML file" msgstr "XML 파일에서 네트워크 생성" #: tools/virsh-network.c:134 msgid "Create a network." msgstr "네트워크 생성" #: tools/virsh-network.c:139 tools/virsh-network.c:184 msgid "file containing an XML network description" msgstr "XML 네트워크 설명이 있는 파일" #: tools/virsh-network.c:164 #, c-format msgid "Network %s created from %s\n" msgstr "%s 에서 생성된 %s 네트워크\n" #: tools/virsh-network.c:168 #, c-format msgid "Failed to create network from %s" msgstr "%s에서 네트워크 생성하기 실패" #: tools/virsh-network.c:178 msgid "define (but don't start) a network from an XML file" msgstr "XML 파일에서 네트워크를 정의함 (시작하지는 않음)" #: tools/virsh-network.c:179 msgid "Define a network." msgstr "네트워크 정의" #: tools/virsh-network.c:209 #, c-format msgid "Network %s defined from %s\n" msgstr "%s에서 정의된 %s 네트워크\n" #: tools/virsh-network.c:213 #, c-format msgid "Failed to define network from %s" msgstr "%s에서 네트워크 정의하기 실패" #: tools/virsh-network.c:223 #, fuzzy msgid "destroy (stop) a network" msgstr "네트워크 강제 종료" #: tools/virsh-network.c:224 #, fuzzy msgid "Forcefully stop a given network." msgstr "주어진 네트워크 강제 종료." #: tools/virsh-network.c:247 #, c-format msgid "Network %s destroyed\n" msgstr "%s 네트워크 강제 종료\n" #: tools/virsh-network.c:249 #, c-format msgid "Failed to destroy network %s" msgstr "%s 네트워크 강제 종료 실패" #: tools/virsh-network.c:261 msgid "network information in XML" msgstr "XML에 있는 네트워크 정보" #: tools/virsh-network.c:262 msgid "Output the network information as an XML dump to stdout." msgstr "XML 덤프로서의 네트워크 정보를 표준 출력으로 출력." #: tools/virsh-network.c:268 #, fuzzy msgid "network information of an inactive domain" msgstr "비활성화 도메인에 대한 설정을 정의하지 않음" #: tools/virsh-network.c:308 #, fuzzy msgid "network information" msgstr "XML에 있는 네트워크 정보" #: tools/virsh-network.c:309 #, fuzzy msgid "Returns basic information about the network" msgstr "노드에 관한 기본 정보 보기" #: tools/virsh-network.c:337 tools/virsh-nwfilter.c:242 #: tools/virsh-secret.c:342 msgid "UUID" msgstr "UUID" #: tools/virsh-network.c:341 #, fuzzy msgid "Active:" msgstr "활성화" #: tools/virsh-network.c:350 tools/virsh-network.c:449 #: tools/virsh-network.c:472 tools/virsh-pool.c:699 tools/virsh-pool.c:1194 msgid "no autostart" msgstr "자동 시작 안함" #: tools/virsh-network.c:356 msgid "Bridge:" msgstr "" #: tools/virsh-network.c:367 msgid "list networks" msgstr "네트워크 목록" #: tools/virsh-network.c:368 msgid "Returns list of networks." msgstr "네트워크 목록을 반환" #: tools/virsh-network.c:373 msgid "list inactive networks" msgstr "비활성화 네트워크 보기" #: tools/virsh-network.c:374 msgid "list inactive & active networks" msgstr "비활성화 & 활성화 네트워크 보기" #: tools/virsh-network.c:394 tools/virsh-network.c:402 msgid "Failed to list active networks" msgstr "활성화 네트워크 보들기 실패" #: tools/virsh-network.c:413 tools/virsh-network.c:423 msgid "Failed to list inactive networks" msgstr "비활성화 네트워크 보기 실패" #: tools/virsh-network.c:433 tools/virsh-pool.c:845 tools/virsh-pool.c:874 #: tools/virsh-pool.c:933 msgid "Autostart" msgstr "자동 시작" #: tools/virsh-network.c:493 msgid "convert a network UUID to network name" msgstr "네트워크 UUID를 네트워크 이름으로 변환" #: tools/virsh-network.c:499 msgid "network uuid" msgstr "네트워크 uuid" #: tools/virsh-network.c:523 msgid "start a (previously defined) inactive network" msgstr "(기존에 정의된) 비활성화 네트워크 시작" #: tools/virsh-network.c:524 msgid "Start a network." msgstr "네트워크 시작" #: tools/virsh-network.c:547 #, c-format msgid "Network %s started\n" msgstr "%s 네트워크 시작\n" #: tools/virsh-network.c:549 #, c-format msgid "Failed to start network %s" msgstr "%s 네트워크 시작 실패" #: tools/virsh-network.c:560 msgid "undefine an inactive network" msgstr "비활성화 네트워크를 정의하지 않음" #: tools/virsh-network.c:561 msgid "Undefine the configuration for an inactive network." msgstr "비활성화 네트워크 설정을 정의하지 않음" #: tools/virsh-network.c:584 #, c-format msgid "Network %s has been undefined\n" msgstr "%s 네트워크가 정의되지 않음\n" #: tools/virsh-network.c:586 #, c-format msgid "Failed to undefine network %s" msgstr "%s 네트워크를 정의하지 않기 실패" #: tools/virsh-network.c:598 msgid "convert a network name to network UUID" msgstr "네트워크 이름을 네트워크 UUID로 변환" #: tools/virsh-network.c:604 msgid "network name" msgstr "네트워크 이름" #: tools/virsh-network.c:624 msgid "failed to get network UUID" msgstr "네트워크 UUID 보기 실패" #: tools/virsh-network.c:634 msgid "edit XML configuration for a network" msgstr "네트워크를 위한 XML 설정을 편집" #: tools/virsh-network.c:635 msgid "Edit the XML configuration for a network." msgstr "네트워크를 위한 XML 설정을 편집" #: tools/virsh-network.c:676 #, fuzzy, c-format msgid "Network %s XML configuration not changed.\n" msgstr "인터페이스 %s XML 설정이 변경되지 않았습니다.\n" #: tools/virsh-network.c:686 #, fuzzy, c-format msgid "Network %s XML configuration edited.\n" msgstr "인터페이스 %s XML 설정이 편집되었습니다.\n" #: tools/virsh-nodedev.c:44 msgid "create a device defined by an XML file on the node" msgstr "노드에 XML 파일로 정의된 장치를 생성합니다" #: tools/virsh-nodedev.c:46 msgid "" "Create a device on the node. Note that this command creates devices on the " "physical host that can then be assigned to a virtual machine." msgstr "" "노드에 장치를 생성합니다. 이 명령은 다음에 가상 머신에 할당될 수 있도록 물리" "적 호스트에 장치를 만든다는 것에 주의하십시오." #: tools/virsh-nodedev.c:54 msgid "file containing an XML description of the device" msgstr "장치에 대한 XML로 된 설명이 있는 파일" #: tools/virsh-nodedev.c:79 #, c-format msgid "Node device %s created from %s\n" msgstr "노드 장치 %s가 %s로부터 생성되었습니다\n" #: tools/virsh-nodedev.c:83 #, c-format msgid "Failed to create node device from %s" msgstr "%s로부터 노드 장치를 생성하는 데 실패" #: tools/virsh-nodedev.c:95 #, fuzzy msgid "destroy (stop) a device on the node" msgstr "노드에 있는 장치를 파괴" #: tools/virsh-nodedev.c:96 #, fuzzy msgid "" "Destroy a device on the node. Note that this command destroys devices on " "the physical host" msgstr "" "노드에서 장치를 파괴합니다. 이 명령은 물리적 호스트에 있는 장치를 파괴한다는 " "것에 유의하십시오." #: tools/virsh-nodedev.c:103 msgid "name of the device to be destroyed" msgstr "파괴할 장치의 이름" #: tools/virsh-nodedev.c:124 #, c-format msgid "Destroyed node device '%s'\n" msgstr "노드 장치 '%s'가 파괴됨\n" #: tools/virsh-nodedev.c:126 #, c-format msgid "Failed to destroy node device '%s'" msgstr "노드 장치 '%s'를 파괴하는 데 실패" #: tools/virsh-nodedev.c:152 msgid "enumerate devices on this host" msgstr "호스트상의 장치를 열거" #: tools/virsh-nodedev.c:158 msgid "list devices in a tree" msgstr "장치를 트리로 나열" #: tools/virsh-nodedev.c:159 msgid "capability name" msgstr "기능 이름" #: tools/virsh-nodedev.c:180 msgid "Failed to count node devices" msgstr "노드 장치 갯수 세기 실패" #: tools/virsh-nodedev.c:190 msgid "Failed to list node devices" msgstr "노드 장치 목록 얻기 실패" #: tools/virsh-nodedev.c:234 msgid "node device details in XML" msgstr "XML로 된 노드 장치 상세정보" #: tools/virsh-nodedev.c:235 msgid "Output the node device details as an XML dump to stdout." msgstr "노드 장치 상세정보를 XML 덤프로 표준출력에 출력" #: tools/virsh-nodedev.c:241 tools/virsh-nodedev.c:284 #: tools/virsh-nodedev.c:327 tools/virsh-nodedev.c:368 msgid "device key" msgstr "장치 키" #: tools/virsh-nodedev.c:257 tools/virsh-nodedev.c:300 #: tools/virsh-nodedev.c:343 tools/virsh-nodedev.c:384 msgid "Could not find matching device" msgstr "일치하는 장치를 찾을 수 없음" #: tools/virsh-nodedev.c:277 #, fuzzy msgid "detach node device from its device driver" msgstr "장치 드라이버에서 노드 장치 탈착" #: tools/virsh-nodedev.c:278 #, fuzzy msgid "Detach node device from its device driver before assigning to a domain." msgstr "도메인에 할당하기 전에 장치 드라이버에서 노드 장치를 탈착" #: tools/virsh-nodedev.c:307 #, fuzzy, c-format msgid "Device %s detached\n" msgstr "장치 %s가 탈착되었습니다\n" #: tools/virsh-nodedev.c:309 #, fuzzy, c-format msgid "Failed to detach device %s" msgstr "장치 %s 분리 실패" #: tools/virsh-nodedev.c:320 msgid "reattach node device to its device driver" msgstr "장치 드라이버에 노드 장치를 재부착" #: tools/virsh-nodedev.c:321 msgid "Reattach node device to its device driver once released by the domain." msgstr "도메인에 의해 한번 해제된 장치 드라이버에 노드 장치를 재부착." #: tools/virsh-nodedev.c:348 #, c-format msgid "Device %s re-attached\n" msgstr "장치 %s가 재부착되었습니다\n" #: tools/virsh-nodedev.c:350 #, c-format msgid "Failed to re-attach device %s" msgstr "장치 %s 재부착 실패" #: tools/virsh-nodedev.c:361 msgid "reset node device" msgstr "노드 장치 리셋" #: tools/virsh-nodedev.c:362 msgid "Reset node device before or after assigning to a domain." msgstr "도메인에 할당하기 전 또는 한 후 노드 장치를 리셋" #: tools/virsh-nodedev.c:389 #, c-format msgid "Device %s reset\n" msgstr "장치 %s가 리셋됨\n" #: tools/virsh-nodedev.c:391 #, c-format msgid "Failed to reset device %s" msgstr "장치 %s의 리셋이 실패" #: tools/virsh-nwfilter.c:75 #, fuzzy, c-format msgid "failed to get nwfilter '%s'" msgstr "인터페이스 '%s'를 가져오는 데 실패" #: tools/virsh-nwfilter.c:84 #, fuzzy msgid "define or update a network filter from an XML file" msgstr "XML 파일에서 네트워크를 정의함 (시작하지는 않음)" #: tools/virsh-nwfilter.c:85 msgid "Define a new network filter or update an existing one." msgstr "" #: tools/virsh-nwfilter.c:90 #, fuzzy msgid "file containing an XML network filter description" msgstr "XML 네트워크 설명이 있는 파일" #: tools/virsh-nwfilter.c:115 #, fuzzy, c-format msgid "Network filter %s defined from %s\n" msgstr "%s에서 정의된 %s 네트워크\n" #: tools/virsh-nwfilter.c:119 #, fuzzy, c-format msgid "Failed to define network filter from %s" msgstr "%s에서 네트워크 정의하기 실패" #: tools/virsh-nwfilter.c:129 #, fuzzy msgid "undefine a network filter" msgstr "정의되지 않은 네트워크 이름" #: tools/virsh-nwfilter.c:130 #, fuzzy msgid "Undefine a given network filter." msgstr "비활성화 네트워크를 정의하지 않음" #: tools/virsh-nwfilter.c:135 tools/virsh-nwfilter.c:173 #: tools/virsh-nwfilter.c:278 #, fuzzy msgid "network filter name or uuid" msgstr "네트워크 이름 또는 uuid" #: tools/virsh-nwfilter.c:153 #, fuzzy, c-format msgid "Network filter %s undefined\n" msgstr "%s 네트워크가 정의되지 않음\n" #: tools/virsh-nwfilter.c:155 #, fuzzy, c-format msgid "Failed to undefine network filter %s" msgstr "%s 네트워크를 정의하지 않기 실패" #: tools/virsh-nwfilter.c:167 #, fuzzy msgid "network filter information in XML" msgstr "XML에 있는 네트워크 정보" #: tools/virsh-nwfilter.c:168 #, fuzzy msgid "Output the network filter information as an XML dump to stdout." msgstr "XML 덤프로서의 네트워크 정보를 표준 출력으로 출력." #: tools/virsh-nwfilter.c:206 #, fuzzy msgid "list network filters" msgstr "네트워크 목록" #: tools/virsh-nwfilter.c:207 #, fuzzy msgid "Returns list of network filters." msgstr "네트워크 목록을 반환" #: tools/virsh-nwfilter.c:227 tools/virsh-nwfilter.c:235 #, fuzzy msgid "Failed to list network filters" msgstr "%s 네트워크 시작 실패" #: tools/virsh-nwfilter.c:272 #, fuzzy msgid "edit XML configuration for a network filter" msgstr "네트워크를 위한 XML 설정을 편집" #: tools/virsh-nwfilter.c:273 #, fuzzy msgid "Edit the XML configuration for a network filter." msgstr "네트워크를 위한 XML 설정을 편집" #: tools/virsh-nwfilter.c:298 #, fuzzy, c-format msgid "Network filter %s XML configuration not changed.\n" msgstr "인터페이스 %s XML 설정이 변경되지 않았습니다.\n" #: tools/virsh-nwfilter.c:309 #, fuzzy, c-format msgid "Network filter %s XML configuration edited.\n" msgstr "인터페이스 %s XML 설정이 편집되었습니다.\n" #: tools/virsh-pool.c:71 #, c-format msgid "failed to get pool '%s'" msgstr "풀 '%s'을 얻는 데 실패" #: tools/virsh-pool.c:80 msgid "autostart a pool" msgstr "자동으로 풀을 시작" #: tools/virsh-pool.c:82 msgid "Configure a pool to be automatically started at boot." msgstr "부팅시 자동으로 풀이 시작되도록 설정함." #: tools/virsh-pool.c:87 tools/virsh-pool.c:384 tools/virsh-pool.c:435 #: tools/virsh-pool.c:473 tools/virsh-pool.c:511 tools/virsh-pool.c:549 #: tools/virsh-pool.c:1129 tools/virsh-pool.c:1295 tools/virsh-pool.c:1369 #: tools/virsh-volume.c:348 tools/virsh-volume.c:445 tools/virsh-volume.c:521 #: tools/virsh-volume.c:619 tools/virsh-volume.c:714 tools/virsh-volume.c:754 #: tools/virsh-volume.c:821 tools/virsh-volume.c:890 tools/virsh-volume.c:973 #: tools/virsh-volume.c:1012 tools/virsh-volume.c:1397 #: tools/virsh-volume.c:1428 msgid "pool name or uuid" msgstr "풀 이름 또는 uuid" #: tools/virsh-pool.c:109 #, c-format msgid "failed to mark pool %s as autostarted" msgstr "자동 시작으로 %s 풀을 표시하기 실패" #: tools/virsh-pool.c:111 #, c-format msgid "failed to unmark pool %s as autostarted" msgstr "자동 시작으로 %s 풀을 표시 해제하기 실패" #: tools/virsh-pool.c:117 #, c-format msgid "Pool %s marked as autostarted\n" msgstr "%s 풀은 자동 시작으로 표시되었습니다\n" #: tools/virsh-pool.c:119 #, c-format msgid "Pool %s unmarked as autostarted\n" msgstr "%s 풀의 자동 시작 표시가 해제되었습니다\n" #: tools/virsh-pool.c:129 msgid "create a pool from an XML file" msgstr "XML 파일에서 풀 생성" #: tools/virsh-pool.c:130 tools/virsh-pool.c:252 msgid "Create a pool." msgstr "풀을 생성." #: tools/virsh-pool.c:136 tools/virsh-pool.c:298 msgid "file containing an XML pool description" msgstr "XML 풀 설명이 있는 파일" #: tools/virsh-pool.c:161 #, c-format msgid "Pool %s created from %s\n" msgstr "%s 에서 생성된 풀 %s\n" #: tools/virsh-pool.c:165 #, c-format msgid "Failed to create pool from %s" msgstr "%s에서 풀 생성하기 실패" #: tools/virsh-pool.c:175 msgid "name of the pool" msgstr "풀의 이름" #: tools/virsh-pool.c:176 msgid "print XML document, but don't define/create" msgstr "XML 문서를 인쇄하되, 정의하거나 만들지는 않습니다" #: tools/virsh-pool.c:177 msgid "type of the pool" msgstr "풀의 유형" #: tools/virsh-pool.c:178 msgid "source-host for underlying storage" msgstr "저장소에 대한 소스 호스트" #: tools/virsh-pool.c:179 msgid "source path for underlying storage" msgstr "저장소에 대한 소스 경로" #: tools/virsh-pool.c:180 msgid "source device for underlying storage" msgstr "저장소에 대한 소스 장치" #: tools/virsh-pool.c:181 msgid "source name for underlying storage" msgstr "저장소에 대한 소스 이름" #: tools/virsh-pool.c:182 msgid "target for underlying storage" msgstr "저장소에 대한 타겟" #: tools/virsh-pool.c:183 #, fuzzy msgid "format for underlying storage" msgstr "저장소에 대한 타겟" #: tools/virsh-pool.c:251 msgid "create a pool from a set of args" msgstr "매개변수로부터 풀을 생성합니다" #: tools/virsh-pool.c:278 #, c-format msgid "Pool %s created\n" msgstr "풀 %s가 생성되었습니다\n" #: tools/virsh-pool.c:281 #, c-format msgid "Failed to create pool %s" msgstr "풀 %s를 생성하는 데 실패" #: tools/virsh-pool.c:292 msgid "define (but don't start) a pool from an XML file" msgstr "XML 파일에서 풀을 정의함 (시작하지는 않음)" #: tools/virsh-pool.c:293 tools/virsh-pool.c:338 msgid "Define a pool." msgstr "풀(Pool) 정의" #: tools/virsh-pool.c:323 #, c-format msgid "Pool %s defined from %s\n" msgstr "풀 %s(%s에서 정의됨)\n" #: tools/virsh-pool.c:327 #, c-format msgid "Failed to define pool from %s" msgstr "%s에서 풀 정의하기 실패" #: tools/virsh-pool.c:337 msgid "define a pool from a set of args" msgstr "매개변수로부터 풀을 정의합니다" #: tools/virsh-pool.c:364 #, c-format msgid "Pool %s defined\n" msgstr "풀 %s가 정의되었습니다\n" #: tools/virsh-pool.c:367 #, c-format msgid "Failed to define pool %s" msgstr "풀 %s를 정의하는 데 실패" #: tools/virsh-pool.c:378 msgid "build a pool" msgstr "풀을 만들기" #: tools/virsh-pool.c:379 msgid "Build a given pool." msgstr "주어진 풀을 만듬" #: tools/virsh-pool.c:385 msgid "do not overwrite an existing pool of this type" msgstr "" #: tools/virsh-pool.c:386 msgid "overwrite any existing data" msgstr "" #: tools/virsh-pool.c:413 #, c-format msgid "Pool %s built\n" msgstr "풀 %s가 만들어졌습니다\n" #: tools/virsh-pool.c:415 #, c-format msgid "Failed to build pool %s" msgstr "풀 %s를 만드는 데 실패" #: tools/virsh-pool.c:428 #, fuzzy msgid "destroy (stop) a pool" msgstr "풀 파괴" #: tools/virsh-pool.c:430 msgid "Forcefully stop a given pool. Raw data in the pool is untouched" msgstr "" #: tools/virsh-pool.c:453 #, c-format msgid "Pool %s destroyed\n" msgstr "풀 %s가 파괴되었습니다\n" #: tools/virsh-pool.c:455 #, c-format msgid "Failed to destroy pool %s" msgstr "풀 %s를 파괴하는 데 실패" #: tools/virsh-pool.c:467 msgid "delete a pool" msgstr "풀을 삭제" #: tools/virsh-pool.c:468 msgid "Delete a given pool." msgstr "주어진 풀을 삭제" #: tools/virsh-pool.c:491 #, c-format msgid "Pool %s deleted\n" msgstr "풀 %s가 삭제되었습니다\n" #: tools/virsh-pool.c:493 #, c-format msgid "Failed to delete pool %s" msgstr "풀 %s를 삭제하는 데 실패" #: tools/virsh-pool.c:505 msgid "refresh a pool" msgstr "풀 새로 고침" #: tools/virsh-pool.c:506 msgid "Refresh a given pool." msgstr "주어진 풀을 새로 고침" #: tools/virsh-pool.c:529 #, c-format msgid "Pool %s refreshed\n" msgstr "풀 %s가 새로고침 되었습니다\n" #: tools/virsh-pool.c:531 #, c-format msgid "Failed to refresh pool %s" msgstr "풀 %s를 새로고침 하는 데 실패" #: tools/virsh-pool.c:543 msgid "pool information in XML" msgstr "XML에 있는 풀 정보" #: tools/virsh-pool.c:544 msgid "Output the pool information as an XML dump to stdout." msgstr "XML 덤프로서의 풀 정보를 표준 출력으로 출력." #: tools/virsh-pool.c:588 msgid "list pools" msgstr "풀 목록" #: tools/virsh-pool.c:589 msgid "Returns list of pools." msgstr "풀 목록 반환" #: tools/virsh-pool.c:594 msgid "list inactive pools" msgstr "비활성화 풀 목록" #: tools/virsh-pool.c:595 msgid "list inactive & active pools" msgstr "비활성화 & 활성화 된 풀 목록" #: tools/virsh-pool.c:596 msgid "display extended details for pools" msgstr "" #: tools/virsh-pool.c:637 tools/virsh-pool.c:663 msgid "Failed to list active pools" msgstr "활성화 풀 목록 얻기 실패" #: tools/virsh-pool.c:646 tools/virsh-pool.c:675 msgid "Failed to list inactive pools" msgstr "비활성화 풀 목록 얻기 실패" #: tools/virsh-pool.c:724 #, fuzzy msgid "Could not retrieve pool information" msgstr "저장소 풀 정보" #: tools/virsh-pool.c:741 tools/virsh-pool.c:1164 msgid "building" msgstr "만드는중" #: tools/virsh-pool.c:747 tools/virsh-pool.c:1172 msgid "degraded" msgstr "강등됨" #: tools/virsh-pool.c:750 tools/virsh-pool.c:1176 #, fuzzy msgid "inaccessible" msgstr "비활성화" #: tools/virsh-pool.c:788 tools/virsh-pool.c:789 tools/virsh-pool.c:790 msgid "-" msgstr "" #: tools/virsh-pool.c:879 tools/virsh-pool.c:934 msgid "Persistent" msgstr "" #: tools/virsh-pool.c:884 tools/virsh-pool.c:934 tools/virsh-volume.c:1206 #, fuzzy msgid "Capacity" msgstr "용량:" #: tools/virsh-pool.c:889 tools/virsh-pool.c:934 tools/virsh-volume.c:1211 #: tools/virsh-volume.c:1242 #, fuzzy msgid "Allocation" msgstr "할당:" #: tools/virsh-pool.c:894 tools/virsh-pool.c:934 #, fuzzy msgid "Available" msgstr "사용가능:" #: tools/virsh-pool.c:968 tools/virsh-volume.c:1273 #, c-format msgid "virAsprintf failed (errno %d)" msgstr "virAsprintf 실패 (errno %d)" #: tools/virsh-pool.c:998 msgid "find potential storage pool sources" msgstr "사용가능한 저장소 풀 소스를 찾습니다" #: tools/virsh-pool.c:999 tools/virsh-pool.c:1074 msgid "Returns XML document." msgstr "XML 문서를 반환." #: tools/virsh-pool.c:1005 msgid "type of storage pool sources to find" msgstr "찾아야 할 저장소 풀 소스 유형" #: tools/virsh-pool.c:1006 msgid "optional host to query" msgstr "질의를 할 선택적인 호스트" #: tools/virsh-pool.c:1007 msgid "optional port to query" msgstr "질의를 할 선택적인 포트" #: tools/virsh-pool.c:1008 #, fuzzy msgid "optional initiator IQN to use for query" msgstr "질의를 할 선택적인 포트" #: tools/virsh-pool.c:1060 tools/virsh-pool.c:1110 #, c-format msgid "Failed to find any %s pool sources" msgstr "%s 풀 소스를 찾는 데 실패했습니다" #: tools/virsh-pool.c:1073 msgid "discover potential storage pool sources" msgstr "사용가능한 저장소 풀 소스를 발견합니다" #: tools/virsh-pool.c:1080 msgid "type of storage pool sources to discover" msgstr "발견할 저장소 풀 소스의 유형" #: tools/virsh-pool.c:1082 msgid "optional file of source xml to query for pools" msgstr "풀에 대해 질의할 소스 xml 파일(선택적임)" #: tools/virsh-pool.c:1123 msgid "storage pool information" msgstr "저장소 풀 정보" #: tools/virsh-pool.c:1124 msgid "Returns basic information about the storage pool." msgstr "저장소 풀에 대한 기본 정보를 반환." #: tools/virsh-pool.c:1207 msgid "Available:" msgstr "사용가능:" #: tools/virsh-pool.c:1221 msgid "convert a pool UUID to pool name" msgstr "풀 UUID를 풀 이름으로 변환" #: tools/virsh-pool.c:1227 msgid "pool uuid" msgstr "풀 uuid" #: tools/virsh-pool.c:1251 msgid "start a (previously defined) inactive pool" msgstr "(기존에 정의된) 비활성화된 풀을 시작" #: tools/virsh-pool.c:1252 msgid "Start a pool." msgstr "풀 시작" #: tools/virsh-pool.c:1257 #, fuzzy msgid "name or uuid of the inactive pool" msgstr "비활성화된 풀의 이름" #: tools/virsh-pool.c:1275 #, c-format msgid "Pool %s started\n" msgstr "풀 %s가 시작되었습니다\n" #: tools/virsh-pool.c:1277 #, c-format msgid "Failed to start pool %s" msgstr "풀 %s를 시작하는 데 실패" #: tools/virsh-pool.c:1289 msgid "undefine an inactive pool" msgstr "비활성화된 풀을 정의 해제하지 않음" #: tools/virsh-pool.c:1290 msgid "Undefine the configuration for an inactive pool." msgstr "비활성화된 풀에 대한 설정을 정의 해제" #: tools/virsh-pool.c:1313 #, c-format msgid "Pool %s has been undefined\n" msgstr "풀 %s의 정의가 해제되었습니다\n" #: tools/virsh-pool.c:1315 #, c-format msgid "Failed to undefine pool %s" msgstr "풀 %s의 정의를 해제하는 데 실패" #: tools/virsh-pool.c:1327 msgid "convert a pool name to pool UUID" msgstr "풀 이름을 풀 UUID로 변환" #: tools/virsh-pool.c:1333 tools/virsh-volume.c:115 tools/virsh-volume.c:291 msgid "pool name" msgstr "풀 이름" #: tools/virsh-pool.c:1353 msgid "failed to get pool UUID" msgstr "풀 UUID 얻기 실패" #: tools/virsh-pool.c:1363 msgid "edit XML configuration for a storage pool" msgstr "저장소 풀을 위한 XML 설정을 편집" #: tools/virsh-pool.c:1364 msgid "Edit the XML configuration for a storage pool." msgstr "저장소 풀을 위한 XML 설정을 편집" #: tools/virsh-pool.c:1403 #, fuzzy, c-format msgid "Pool %s XML configuration not changed.\n" msgstr "도메인 %s XML 설정이 변경되지 않았습니다.\n" #: tools/virsh-pool.c:1413 #, fuzzy, c-format msgid "Pool %s XML configuration edited.\n" msgstr "도메인 %s XML 설정이 편집되었습니다.\n" #: tools/virsh-secret.c:63 #, c-format msgid "failed to get secret '%s'" msgstr "'%s' 비밀 얻는 데 실패" #: tools/virsh-secret.c:72 msgid "define or modify a secret from an XML file" msgstr "XML 파일의 비밀 정보를 정의하거나 변경" #: tools/virsh-secret.c:73 msgid "Define or modify a secret." msgstr "비밀정보를 정의하거나 변경" #: tools/virsh-secret.c:78 msgid "file containing secret attributes in XML" msgstr "XML의 비밀 특성을 포함하는 파일" #: tools/virsh-secret.c:103 #, c-format msgid "Failed to set attributes from %s" msgstr "%s에 특성 설정하기 실패" #: tools/virsh-secret.c:107 msgid "Failed to get UUID of created secret" msgstr "생성된 비밀정보의 UUID를 얻는 데 실패" #: tools/virsh-secret.c:111 #, c-format msgid "Secret %s created\n" msgstr "비밀 %s가 생성되었습니다\n" #: tools/virsh-secret.c:120 msgid "secret attributes in XML" msgstr "XML로 된 비밀 정보 특성" #: tools/virsh-secret.c:121 msgid "Output attributes of a secret as an XML dump to stdout." msgstr "비밀정보 특성을 XML 덤프로 표준 출력에 출력" #: tools/virsh-secret.c:126 tools/virsh-secret.c:166 tools/virsh-secret.c:226 #: tools/virsh-secret.c:278 msgid "secret UUID" msgstr "비밀 UUID" #: tools/virsh-secret.c:160 msgid "set a secret value" msgstr "비밀정보 값을 설정" #: tools/virsh-secret.c:161 msgid "Set a secret value." msgstr "비밀정보 값을 설정." #: tools/virsh-secret.c:167 msgid "base64-encoded secret value" msgstr "base64로 인코딩된 비밀 정보 값" #: tools/virsh-secret.c:192 msgid "Invalid base64 data" msgstr "잘못된 base64 데이터" #: tools/virsh-secret.c:205 msgid "Failed to set secret value" msgstr "비밀정보 값 설정 실패" #: tools/virsh-secret.c:208 msgid "Secret value set\n" msgstr "비밀정보 값이 설정됨\n" #: tools/virsh-secret.c:220 msgid "Output a secret value" msgstr "비밀정보 값을 출력" #: tools/virsh-secret.c:221 msgid "Output a secret value to stdout." msgstr "비밀정보 값을 표준출력에 출력" #: tools/virsh-secret.c:272 msgid "undefine a secret" msgstr "비밀정보 정의를 해제" #: tools/virsh-secret.c:273 msgid "Undefine a secret." msgstr "비밀정보 정의를 해제" #: tools/virsh-secret.c:297 #, c-format msgid "Failed to delete secret %s" msgstr "비밀정보 %s 삭제 실패" #: tools/virsh-secret.c:300 #, c-format msgid "Secret %s deleted\n" msgstr "비밀정보 %s가 삭제되었습니다\n" #: tools/virsh-secret.c:312 msgid "list secrets" msgstr "비밀정보 목록 나열" #: tools/virsh-secret.c:313 msgid "Returns a list of secrets" msgstr "비밀정보 목록을 반환" #: tools/virsh-secret.c:328 tools/virsh-secret.c:335 msgid "Failed to list secrets" msgstr "비밀정보 목록생성 실패" #: tools/virsh-secret.c:342 msgid "Usage" msgstr "사용법" #: tools/virsh-secret.c:356 msgid "Volume" msgstr "볼륨" #: tools/virsh-secret.c:366 msgid "Unused" msgstr "미사용" #: tools/virsh-snapshot.c:71 #, fuzzy msgid "cannot halt after snapshot of transient domain" msgstr "동작중인 도메인을 삭제할 수 없음" #: tools/virsh-snapshot.c:90 tools/virsh-snapshot.c:936 #, fuzzy msgid "Could not get snapshot name" msgstr "표준화된 호스트 이름을 결정할 수 없습니다" #: tools/virsh-snapshot.c:95 #, fuzzy, c-format msgid "Domain snapshot %s created from '%s'" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh-snapshot.c:97 #, fuzzy, c-format msgid "Domain snapshot %s created" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh-snapshot.c:114 #, fuzzy msgid "Create a snapshot from XML" msgstr "풀을 생성." #: tools/virsh-snapshot.c:115 msgid "Create a snapshot (disk and RAM) from XML" msgstr "" #: tools/virsh-snapshot.c:121 #, fuzzy msgid "domain snapshot XML" msgstr "도메인 상태" #: tools/virsh-snapshot.c:122 msgid "redefine metadata for existing snapshot" msgstr "" #: tools/virsh-snapshot.c:123 #, fuzzy msgid "with redefine, set current snapshot" msgstr "현재 시간을 얻을 수 없음" #: tools/virsh-snapshot.c:124 tools/virsh-snapshot.c:263 #, fuzzy msgid "take snapshot but create no metadata" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh-snapshot.c:125 tools/virsh-snapshot.c:264 #, fuzzy msgid "halt domain after snapshot is created" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh-snapshot.c:126 tools/virsh-snapshot.c:265 msgid "capture disk state but not vm state" msgstr "" #: tools/virsh-snapshot.c:127 tools/virsh-snapshot.c:266 #, fuzzy msgid "reuse any existing external files" msgstr "그래픽 장치를 추출할 수 없음" #: tools/virsh-snapshot.c:128 tools/virsh-snapshot.c:267 msgid "quiesce guest's file systems" msgstr "" #: tools/virsh-snapshot.c:129 tools/virsh-snapshot.c:268 #, fuzzy msgid "require atomic operation" msgstr "동작 중 타임 아웃" #: tools/virsh-snapshot.c:247 #, fuzzy, c-format msgid "unable to parse diskspec: %s" msgstr "모니터 경로 %s를 열 수 없음" #: tools/virsh-snapshot.c:253 #, fuzzy msgid "Create a snapshot from a set of args" msgstr "매개변수로부터 풀을 생성합니다" #: tools/virsh-snapshot.c:254 msgid "Create a snapshot (disk and RAM) from arguments" msgstr "" #: tools/virsh-snapshot.c:260 #, fuzzy msgid "name of snapshot" msgstr "풀을 생성." #: tools/virsh-snapshot.c:261 #, fuzzy msgid "description of snapshot" msgstr "%s상의 매체를 꺼내기할 수 없음" #: tools/virsh-snapshot.c:262 #, fuzzy msgid "print XML document rather than create" msgstr "XML 문서를 인쇄하되, 정의하거나 만들지는 않습니다" #: tools/virsh-snapshot.c:270 msgid "disk attributes: disk[,snapshot=type][,driver=type][,file=name]" msgstr "" #: tools/virsh-snapshot.c:308 #, fuzzy msgid "argument must not be empty" msgstr "플래그가 0이어야 합니다" #: tools/virsh-snapshot.c:364 #, fuzzy, c-format msgid "invalid argument for --%s" msgstr "%s에 있는 잘못된 인수" #: tools/virsh-snapshot.c:369 #, c-format msgid "--%s and --current are mutually exclusive" msgstr "" #: tools/virsh-snapshot.c:378 #, c-format msgid "--%s or --current is required" msgstr "" #: tools/virsh-snapshot.c:394 #, fuzzy msgid "edit XML for a snapshot" msgstr "풀을 생성." #: tools/virsh-snapshot.c:395 #, fuzzy msgid "Edit the domain snapshot XML for a named snapshot" msgstr "도메인을 다른 호스트로 이전" #: tools/virsh-snapshot.c:401 tools/virsh-snapshot.c:684 #: tools/virsh-snapshot.c:1365 tools/virsh-snapshot.c:1484 #: tools/virsh-snapshot.c:1557 #, fuzzy msgid "snapshot name" msgstr "풀 이름" #: tools/virsh-snapshot.c:402 #, fuzzy msgid "also set edited snapshot as current" msgstr "xml 문서 구문분석 실패" #: tools/virsh-snapshot.c:403 #, fuzzy msgid "allow renaming an existing snapshot" msgstr "도메인 상태 빠짐" #: tools/virsh-snapshot.c:404 #, fuzzy msgid "allow cloning to new name" msgstr "너무 긴 네트워크 장치 이름" #: tools/virsh-snapshot.c:424 msgid "--rename and --clone are mutually exclusive" msgstr "" #: tools/virsh-snapshot.c:449 #, fuzzy, c-format msgid "Snapshot %s XML configuration not changed.\n" msgstr "도메인 %s XML 설정이 변경되지 않았습니다.\n" #: tools/virsh-snapshot.c:465 #, fuzzy, c-format msgid "Snapshot %s edited.\n" msgstr "%s 네트워크가 정의되지 않음\n" #: tools/virsh-snapshot.c:467 #, fuzzy, c-format msgid "Snapshot %s cloned to %s.\n" msgstr "%s 네트워크가 정의되지 않음\n" #: tools/virsh-snapshot.c:476 #, fuzzy, c-format msgid "Failed to clean up %s" msgstr "%s 생성 실패" #: tools/virsh-snapshot.c:481 #, c-format msgid "Must use --rename or --clone to change %s to %s" msgstr "" #: tools/virsh-snapshot.c:505 tools/virsh-snapshot.c:506 #, fuzzy msgid "Get or set the current snapshot" msgstr "현재 시간을 얻을 수 없음" #: tools/virsh-snapshot.c:512 msgid "list the name, rather than the full xml" msgstr "" #: tools/virsh-snapshot.c:516 msgid "name of existing snapshot to make current" msgstr "" #: tools/virsh-snapshot.c:543 #, fuzzy, c-format msgid "invalid snapshotname argument '%s'" msgstr "%s에 있는 잘못된 인수" #: tools/virsh-snapshot.c:553 msgid "--name and snapshotname are mutually exclusive" msgstr "" #: tools/virsh-snapshot.c:569 #, fuzzy, c-format msgid "Snapshot %s set as current" msgstr "'%s'를 생성할 수 없음" #: tools/virsh-snapshot.c:578 #, fuzzy, c-format msgid "domain '%s' has no current snapshot" msgstr "도메인이 일시 중지되지 않았습니다" #: tools/virsh-snapshot.c:661 #, fuzzy msgid "unable to determine if snapshot has parent" msgstr "xml 문서 구문분석 실패" #: tools/virsh-snapshot.c:677 #, fuzzy msgid "snapshot information" msgstr "노드 정보" #: tools/virsh-snapshot.c:678 #, fuzzy msgid "Returns basic information about a snapshot." msgstr "노드에 관한 기본 정보 보기" #: tools/virsh-snapshot.c:685 #, fuzzy msgid "info on current snapshot" msgstr "현재 시간을 얻을 수 없음" #: tools/virsh-snapshot.c:716 msgid "Domain:" msgstr "" #: tools/virsh-snapshot.c:732 msgid "Current:" msgstr "" #: tools/virsh-snapshot.c:744 #, fuzzy msgid "unexpected problem reading snapshot xml" msgstr "예기치 못한 도메인 %s가 이미 존재함" #: tools/virsh-snapshot.c:753 msgid "Parent:" msgstr "" #: tools/virsh-snapshot.c:766 msgid "Children:" msgstr "" #: tools/virsh-snapshot.c:771 msgid "Descendants:" msgstr "" #: tools/virsh-snapshot.c:782 msgid "Metadata:" msgstr "" #: tools/virsh-snapshot.c:975 #, fuzzy msgid "failed to collect snapshot list" msgstr "경로 %s를 만드는 데 실패" #: tools/virsh-snapshot.c:1054 #, fuzzy, c-format msgid "snapshot %s disappeared from list" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh-snapshot.c:1137 #, fuzzy msgid "List snapshots for a domain" msgstr "도메인에 대한 메모리 통계를 얻음" #: tools/virsh-snapshot.c:1138 msgid "Snapshot List" msgstr "" #: tools/virsh-snapshot.c:1144 #, fuzzy msgid "add a column showing parent snapshot" msgstr "%s에 인자를 넣을 수 없음" #: tools/virsh-snapshot.c:1145 #, fuzzy msgid "list only snapshots without parents" msgstr "이미 %s 도메인이 이미 uuid %s로 존재함" #: tools/virsh-snapshot.c:1146 #, fuzzy msgid "list only snapshots without children" msgstr "이미 %s 도메인이 이미 uuid %s로 존재함" #: tools/virsh-snapshot.c:1148 #, fuzzy msgid "list only snapshots that are not leaves (with children)" msgstr "이미 %s 도메인이 이미 uuid %s로 존재함" #: tools/virsh-snapshot.c:1150 msgid "list only snapshots that have metadata that would prevent undefine" msgstr "" #: tools/virsh-snapshot.c:1152 msgid "list only snapshots that have no metadata managed by libvirt" msgstr "" #: tools/virsh-snapshot.c:1153 #, fuzzy msgid "list snapshots in a tree" msgstr "장치를 트리로 나열" #: tools/virsh-snapshot.c:1154 #, fuzzy msgid "limit list to children of given snapshot" msgstr "현재 시간을 얻을 수 없음" #: tools/virsh-snapshot.c:1156 #, fuzzy msgid "limit list to children of current snapshot" msgstr "현재 시간을 얻을 수 없음" #: tools/virsh-snapshot.c:1157 msgid "with --from, list all descendants" msgstr "" #: tools/virsh-snapshot.c:1201 msgid "--parent and --roots are mutually exclusive" msgstr "" #: tools/virsh-snapshot.c:1206 msgid "--parent and --tree are mutually exclusive" msgstr "" #: tools/virsh-snapshot.c:1213 msgid "--roots and --tree are mutually exclusive" msgstr "" #: tools/virsh-snapshot.c:1218 msgid "--roots and --from are mutually exclusive" msgstr "" #: tools/virsh-snapshot.c:1226 msgid "--leaves and --tree are mutually exclusive" msgstr "" #: tools/virsh-snapshot.c:1234 msgid "--no-leaves and --tree are mutually exclusive" msgstr "" #: tools/virsh-snapshot.c:1250 msgid "--descendants requires either --from or --current" msgstr "" #: tools/virsh-snapshot.c:1263 tools/virsh-snapshot.c:1267 #, fuzzy msgid "Creation Time" msgstr "작업 실패" #: tools/virsh-snapshot.c:1264 msgid "Parent" msgstr "" #: tools/virsh-snapshot.c:1322 msgid "time_t overflow" msgstr "" #: tools/virsh-snapshot.c:1358 msgid "Dump XML for a domain snapshot" msgstr "" #: tools/virsh-snapshot.c:1359 msgid "Snapshot Dump XML" msgstr "" #: tools/virsh-snapshot.c:1420 #, fuzzy msgid "Get the name of the parent of a snapshot" msgstr "%s상의 매체를 꺼내기할 수 없음" #: tools/virsh-snapshot.c:1421 msgid "Extract the snapshot's parent, if any" msgstr "" #: tools/virsh-snapshot.c:1427 #, fuzzy msgid "find parent of snapshot name" msgstr "표준화된 호스트 이름을 결정할 수 없습니다" #: tools/virsh-snapshot.c:1428 #, fuzzy msgid "find parent of current snapshot" msgstr "현재 시간을 얻을 수 없음" #: tools/virsh-snapshot.c:1455 #, fuzzy, c-format msgid "snapshot '%s' has no parent" msgstr "동작중인 도메인을 삭제할 수 없음" #: tools/virsh-snapshot.c:1477 #, fuzzy msgid "Revert a domain to a snapshot" msgstr "도메인을 다른 호스트로 이전" #: tools/virsh-snapshot.c:1478 #, fuzzy msgid "Revert domain to snapshot" msgstr "도메인을 다른 호스트로 이전" #: tools/virsh-snapshot.c:1485 #, fuzzy msgid "revert to current snapshot" msgstr "현재 시간을 얻을 수 없음" #: tools/virsh-snapshot.c:1486 msgid "after reverting, change state to running" msgstr "" #: tools/virsh-snapshot.c:1487 msgid "after reverting, change state to paused" msgstr "" #: tools/virsh-snapshot.c:1488 msgid "try harder on risky reverts" msgstr "" #: tools/virsh-snapshot.c:1550 #, fuzzy msgid "Delete a domain snapshot" msgstr "주어진 풀을 삭제" #: tools/virsh-snapshot.c:1551 msgid "Snapshot Delete" msgstr "" #: tools/virsh-snapshot.c:1558 #, fuzzy msgid "delete current snapshot" msgstr "현재 시간을 얻을 수 없음" #: tools/virsh-snapshot.c:1559 msgid "delete snapshot and all children" msgstr "" #: tools/virsh-snapshot.c:1560 #, fuzzy msgid "delete children but not snapshot" msgstr "현재 시간을 얻을 수 없음" #: tools/virsh-snapshot.c:1562 msgid "delete only libvirt metadata, leaving snapshot contents behind" msgstr "" #: tools/virsh-snapshot.c:1598 #, fuzzy, c-format msgid "Domain snapshot %s children deleted\n" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh-snapshot.c:1600 #, fuzzy, c-format msgid "Domain snapshot %s deleted\n" msgstr "%s 에서 생성된 도메인 %s\n" #: tools/virsh-snapshot.c:1602 #, fuzzy, c-format msgid "Failed to delete snapshot %s" msgstr "경로 %s를 만드는 데 실패" #: tools/virsh-volume.c:93 tools/virsh-volume.c:233 #, c-format msgid "failed to get vol '%s'" msgstr "'%s' 볼륨을 얻는 데 실패" #: tools/virsh-volume.c:95 #, fuzzy, c-format msgid "failed to get vol '%s', specifying --%s might help" msgstr "'%s' 볼륨을 얻는 데 실패" #: tools/virsh-volume.c:109 msgid "create a volume from a set of args" msgstr "매개변수로부터 볼륨을 생성합니다" #: tools/virsh-volume.c:110 tools/virsh-volume.c:286 msgid "Create a vol." msgstr "볼륨을 생성." #: tools/virsh-volume.c:116 msgid "name of the volume" msgstr "볼륨의 이름" #: tools/virsh-volume.c:118 msgid "size of the vol, as scaled integer (default bytes)" msgstr "" #: tools/virsh-volume.c:120 msgid "initial allocation size, as scaled integer (default bytes)" msgstr "" #: tools/virsh-volume.c:122 #, fuzzy msgid "file format type raw,bochs,qcow,qcow2,qed,vmdk" msgstr "파일 유형(raw, bochs, qcow, qcow2, vmdk)" #: tools/virsh-volume.c:124 msgid "the backing volume if taking a snapshot" msgstr "" #: tools/virsh-volume.c:126 msgid "format of backing volume if taking a snapshot" msgstr "" #: tools/virsh-volume.c:164 tools/virsh-volume.c:170 tools/virsh-volume.c:939 #, c-format msgid "Malformed size %s" msgstr "잘못된 형식의 크기 %s" #: tools/virsh-volume.c:267 #, c-format msgid "Vol %s created\n" msgstr "볼륨 %s가 생성되었습니다\n" #: tools/virsh-volume.c:271 #, c-format msgid "Failed to create vol %s" msgstr "%s 볼륨을 얻는 데 실패" #: tools/virsh-volume.c:285 msgid "create a vol from an XML file" msgstr "XML 파일에서 볼륨 생성" #: tools/virsh-volume.c:292 tools/virsh-volume.c:349 msgid "file containing an XML vol description" msgstr "XML 볼륨 설명이 있는 파일" #: tools/virsh-volume.c:328 #, c-format msgid "Vol %s created from %s\n" msgstr "볼륨 %s(%s 에서 생성됨)\n" #: tools/virsh-volume.c:332 tools/virsh-volume.c:388 #, c-format msgid "Failed to create vol from %s" msgstr "%s에서 볼륨 생성하기 실패" #: tools/virsh-volume.c:342 msgid "create a vol, using another volume as input" msgstr "다른 볼륨을 입력으로 사용해서 새 볼륨을 만듭니다" #: tools/virsh-volume.c:343 msgid "Create a vol from an existing volume." msgstr "기존 볼륨에서 새 볼륨을 만듭니다." #: tools/virsh-volume.c:350 msgid "input vol name or key" msgstr "입력 볼륨의 이름이나 키" #: tools/virsh-volume.c:351 msgid "pool name or uuid of the input volume's pool" msgstr "입력 볼륨의 풀의 이름이나 uuid" #: tools/virsh-volume.c:385 #, c-format msgid "Vol %s created from input vol %s\n" msgstr "볼륨 %s가 입력 볼륨 %s에서 생성되었습니다\n" #: tools/virsh-volume.c:414 #, fuzzy msgid "(volume_definition)" msgstr "잘못된 CPU 정의" #: tools/virsh-volume.c:437 msgid "clone a volume." msgstr "볼륨을 복제." #: tools/virsh-volume.c:438 msgid "Clone an existing volume." msgstr "기존 볼륨을 복제" #: tools/virsh-volume.c:443 msgid "orig vol name or key" msgstr "원본 볼륨의 이름이나 키" #: tools/virsh-volume.c:444 msgid "clone name" msgstr "복제 이름" #: tools/virsh-volume.c:467 tools/virsh-volume.c:1365 msgid "failed to get parent pool" msgstr "부모 풀을 얻는 데 실패" #: tools/virsh-volume.c:487 #, c-format msgid "Vol %s cloned from %s\n" msgstr "볼륨 %s(%s에서 복제됨)\n" #: tools/virsh-volume.c:490 #, c-format msgid "Failed to clone vol from %s" msgstr "%s에서 볼륨 복제하기 실패" #: tools/virsh-volume.c:513 msgid "upload a file into a volume" msgstr "" #: tools/virsh-volume.c:514 msgid "Upload a file into a volume" msgstr "" #: tools/virsh-volume.c:519 tools/virsh-volume.c:617 tools/virsh-volume.c:713 #: tools/virsh-volume.c:753 tools/virsh-volume.c:820 tools/virsh-volume.c:887 #: tools/virsh-volume.c:972 msgid "vol name, key or path" msgstr "볼륨 이름, 키, 또는 경로" #: tools/virsh-volume.c:520 tools/virsh-volume.c:618 tools/virsh-volume.c:845 #: tools/virsh-volume.c:1102 msgid "file" msgstr "파일" #: tools/virsh-volume.c:522 #, fuzzy msgid "volume offset to upload to" msgstr "볼륨 키 또는 경로" #: tools/virsh-volume.c:523 msgid "amount of data to upload" msgstr "" #: tools/virsh-volume.c:576 #, fuzzy, c-format msgid "cannot upload to volume %s" msgstr "볼륨 '%s'를 열 수 없음" #: tools/virsh-volume.c:581 #, fuzzy, c-format msgid "cannot send data to volume %s" msgstr "데이터를 파일 '%s'에 동기화할 수 없음" #: tools/virsh-volume.c:592 tools/virsh-volume.c:686 #, fuzzy, c-format msgid "cannot close volume %s" msgstr "볼륨 '%s'를 열 수 없음" #: tools/virsh-volume.c:611 tools/virsh-volume.c:612 #, fuzzy msgid "Download a volume to a file" msgstr "도메인 상태를 파일에 저장" #: tools/virsh-volume.c:620 msgid "volume offset to download from" msgstr "" #: tools/virsh-volume.c:621 msgid "amount of data to download" msgstr "" #: tools/virsh-volume.c:661 #, fuzzy, c-format msgid "cannot create %s" msgstr "'%s'를 생성할 수 없음" #: tools/virsh-volume.c:670 #, fuzzy, c-format msgid "cannot download from volume %s" msgstr "볼륨 '%s'를 열 수 없음" #: tools/virsh-volume.c:675 #, fuzzy, c-format msgid "cannot receive data from volume %s" msgstr "데이터를 수신할 수 없음: %s" #: tools/virsh-volume.c:707 msgid "delete a vol" msgstr "볼륨 삭제" #: tools/virsh-volume.c:708 msgid "Delete a given vol." msgstr "주어진 볼륨을 삭제." #: tools/virsh-volume.c:733 #, c-format msgid "Vol %s deleted\n" msgstr "볼륨 %s가 삭제되었습니다\n" #: tools/virsh-volume.c:735 #, c-format msgid "Failed to delete vol %s" msgstr "%s 볼륨을 삭제하는 데 실패" #: tools/virsh-volume.c:747 msgid "wipe a vol" msgstr "볼륨을 깨끗이 밀기" #: tools/virsh-volume.c:748 msgid "Ensure data previously on a volume is not accessible to future reads" msgstr "예전에 볼륨에 있던 데이터는 향후 읽을 수 없다는 것을 확실히 하십시오" #: tools/virsh-volume.c:755 msgid "perform selected wiping algorithm" msgstr "" #: tools/virsh-volume.c:788 #, fuzzy, c-format msgid "Unsupported algorithm '%s'" msgstr "지원하지 않는 설정 유형 %s" #: tools/virsh-volume.c:799 #, c-format msgid "Failed to wipe vol %s" msgstr "%s 볼륨을 미는 데 실패" #: tools/virsh-volume.c:803 #, c-format msgid "Vol %s wiped\n" msgstr "볼륨 %s를 깨끗이 밀었습니다\n" #: tools/virsh-volume.c:814 msgid "storage vol information" msgstr "저장소 볼륨 정보" #: tools/virsh-volume.c:815 msgid "Returns basic information about the storage vol." msgstr "저장소 볼륨에 대한 기본 정보를 반환." #: tools/virsh-volume.c:845 tools/virsh-volume.c:849 tools/virsh-volume.c:853 #: tools/virsh-volume.c:857 tools/virsh-volume.c:861 msgid "Type:" msgstr "유형:" #: tools/virsh-volume.c:849 tools/virsh-volume.c:1105 msgid "block" msgstr "블럭" #: tools/virsh-volume.c:853 tools/virsh-volume.c:1108 msgid "dir" msgstr "" #: tools/virsh-volume.c:857 #, fuzzy msgid "network" msgstr "네트워크 이름" #: tools/virsh-volume.c:881 #, fuzzy msgid "resize a vol" msgstr "볼륨을 깨끗이 밀기" #: tools/virsh-volume.c:882 #, fuzzy msgid "Resizes a storage volume." msgstr "활성화 볼륨 목록 얻기 실패" #: tools/virsh-volume.c:889 msgid "new capacity for the vol, as scaled integer (default bytes)" msgstr "" #: tools/virsh-volume.c:892 msgid "allocate the new capacity, rather than leaving it sparse" msgstr "" #: tools/virsh-volume.c:894 msgid "use capacity as a delta to current size, rather than the new size" msgstr "" #: tools/virsh-volume.c:895 msgid "allow the resize to shrink the volume" msgstr "" #: tools/virsh-volume.c:934 msgid "negative size requires --delta and --shrink" msgstr "" #: tools/virsh-volume.c:945 #, c-format msgid "Size of volume '%s' successfully changed by %s\n" msgstr "" #: tools/virsh-volume.c:946 #, c-format msgid "Size of volume '%s' successfully changed to %s\n" msgstr "" #: tools/virsh-volume.c:951 #, fuzzy, c-format msgid "Failed to change size of volume '%s' by %s\n" msgstr "'%s'의 소유권을 %d로 이전할 수 없음: %d" #: tools/virsh-volume.c:952 #, fuzzy, c-format msgid "Failed to change size of volume '%s' to %s\n" msgstr "'%s'의 소유권을 %d로 이전할 수 없음: %d" #: tools/virsh-volume.c:966 msgid "vol information in XML" msgstr "XML로 된 볼륨 정보" #: tools/virsh-volume.c:967 msgid "Output the vol information as an XML dump to stdout." msgstr "XML 덤프로서의 볼륨 정보를 표준 출력으로 출력." #: tools/virsh-volume.c:1006 msgid "list vols" msgstr "볼륨 목록" #: tools/virsh-volume.c:1007 msgid "Returns list of vols by pool." msgstr "풀의 볼륨 목록을 반환." #: tools/virsh-volume.c:1013 msgid "display extended details for volumes" msgstr "" #: tools/virsh-volume.c:1054 #, fuzzy msgid "Failed to list storage volumes" msgstr "활성화 볼륨 목록 얻기 실패" #: tools/virsh-volume.c:1064 msgid "Failed to list active vols" msgstr "활성화 볼륨 목록 얻기 실패" #: tools/virsh-volume.c:1176 tools/virsh-volume.c:1196 #: tools/virsh-volume.c:1241 msgid "Path" msgstr "경로" #: tools/virsh-volume.c:1303 msgid "returns the volume name for a given volume key or path" msgstr "" #: tools/virsh-volume.c:1309 tools/virsh-volume.c:1341 #, fuzzy msgid "volume key or path" msgstr "볼륨 키 또는 경로" #: tools/virsh-volume.c:1334 msgid "returns the storage pool for a given volume key or path" msgstr "" #: tools/virsh-volume.c:1340 msgid "return the pool uuid rather than pool name" msgstr "" #: tools/virsh-volume.c:1390 msgid "returns the volume key for a given volume name or path" msgstr "" #: tools/virsh-volume.c:1396 #, fuzzy msgid "volume name or path" msgstr "볼륨 이름, 키, 또는 경로" #: tools/virsh-volume.c:1421 msgid "returns the volume path for a given volume name or key" msgstr "" #: tools/virsh-volume.c:1427 #, fuzzy msgid "volume name or key" msgstr "볼륨 이름 또는 키" #: tools/virt-host-validate-common.c:59 #, c-format msgid "%6s: Checking %-60s: " msgstr "" #: tools/virt-host-validate-common.c:81 tools/virt-host-validate-common.c:83 msgid "PASS" msgstr "" #: tools/virt-host-validate-common.c:88 msgid "FAIL" msgstr "" #: tools/virt-host-validate-common.c:89 msgid "WARN" msgstr "" #: tools/virt-host-validate-common.c:90 msgid "NOTE" msgstr "" #: tools/virt-host-validate-common.c:168 #, c-format msgid "for Linux >= %d.%d.%d" msgstr "" #: tools/virt-host-validate-lxc.c:33 msgid "Upgrade to a kernel supporting namespaces" msgstr "" #: tools/virt-host-validate-qemu.c:37 msgid "" "Check that the 'kvm-intel' or 'kvm-amd' modules are loaded & the BIOS has " "enabled virtualization" msgstr "" #: tools/virt-host-validate-qemu.c:42 msgid "" "Only emulated CPUs are available, performance will be significantly limited" msgstr "" #: tools/virt-host-validate-qemu.c:47 msgid "Load the 'vhost_net' module to improve performance of virtio networking" msgstr "" #: tools/virt-host-validate-qemu.c:53 msgid "Load the 'tun' module to enable networking for QEMU guests" msgstr "" #: tools/virt-host-validate.c:45 #, c-format msgid "" "\n" "syntax: %s [OPTIONS] [HVTYPE]\n" "\n" " Hypervisor types:\n" "\n" " - qemu\n" " - lxc\n" "\n" " Options:\n" " -h, --help Display command line help\n" " -v, --version Display command version\n" " -q, --quiet Don't display progress information\n" "\n" msgstr "" #: tools/virt-host-validate.c:118 #, c-format msgid "%s: too many command line arguments\n" msgstr "" #: tools/virt-host-validate.c:145 #, fuzzy, c-format msgid "%s: unsupported hypervisor name %s\n" msgstr "지원되지 않는 디스크 유형 '%s'" #~ msgid "missing security model" #~ msgstr "보안 모델 빠짐" #, fuzzy #~ msgid "cgroup cpu is not active" #~ msgstr "도메인 상태" #, fuzzy #~ msgid "a parameter is missing for 802.1Qbg description" #~ msgstr "매겨변수 %s가 목적지에 대해 너무 큼" #, fuzzy #~ msgid "profileid parameter is missing for 802.1Qbh description" #~ msgstr "매겨변수 %s가 목적지에 대해 너무 큼" #, fuzzy #~ msgid "unexpected virtualport type %d" #~ msgstr "예기치 못한 입력 타입 %d" #, fuzzy #~ msgid "missing name" #~ msgstr "CPU 모델 이름이 빠져있습니다" #, fuzzy #~ msgid "missing uuid" #~ msgstr "빠짐 \"" #, fuzzy #~ msgid "bad domain or no connection" #~ msgstr "읽기 전용 연결" #, fuzzy #~ msgid "bad network or no connection" #~ msgstr "읽기 전용 연결" #, fuzzy #~ msgid "bad interface or no connection" #~ msgstr "연결 해시 테이블에 인터페이스 추가 실패" #, fuzzy #~ msgid "bad storage pool or no connection" #~ msgstr "저장소 풀이 동작중이 아닙니다" #, fuzzy #~ msgid "missing key" #~ msgstr "빠짐 \"" #, fuzzy #~ msgid "bad storage volume or no connection" #~ msgstr "내부에 잘못된 저장소 볼륨 포인터" #, fuzzy #~ msgid "missing usageID" #~ msgstr "PCI 버스 빠짐" #, fuzzy #~ msgid "bad secret or no connection" #~ msgstr "서버가 연결을 닫았습니다" #, fuzzy #~ msgid "bad nwfilter or no connection" #~ msgstr "읽기 전용 연결" #, fuzzy #~ msgid "not a snapshot" #~ msgstr "풀을 생성." #, fuzzy #~ msgid "%s: unsupported flags (0x%lx)" #~ msgstr "지원되지 않는 플래그(0x%x)가 '%s'에 전달되었습니다" #, fuzzy #~ msgid "Tried to register an internal Xen driver" #~ msgstr "저장소 드라이버를 찾는 데 실패" #, fuzzy #~ msgid "disk is NULL" #~ msgstr "버퍼가 NULL입니다" #~ msgid "buffer is NULL" #~ msgstr "버퍼가 NULL입니다" #~ msgid "buffer is NULL but size is non-zero" #~ msgstr "버퍼가 NULL이지만 크기가 0이 아닙니다" #, fuzzy #~ msgid "info is NULL" #~ msgstr "버퍼가 NULL입니다" #, fuzzy #~ msgid "Readonly leases are not supported" #~ msgstr "설정가능한 타임존을 지원하지 않습니다." #, fuzzy #~ msgid "Shareable leases are not supported" #~ msgstr "설정가능한 타임존을 지원하지 않습니다." #, fuzzy #~ msgid "Failed to query file context on /" #~ msgstr "%s 네트워크를 정의하지 않기 실패" #~ msgid "failed to create server socket '%s'" #~ msgstr "서버 소켓 '%s'를 생성하는 데 실패" #~ msgid "Socket path %s too long for destination" #~ msgstr "소켓 경로 %s가 목적지에 대해 너무 긺" #~ msgid "failed to bind server socket '%s'" #~ msgstr "서버 소켓 '%s'에 대한 바인드 실패" #~ msgid "failed to listen server socket %s" #~ msgstr "서버 소켓 %s에 대한 listen 실패" #, fuzzy #~ msgid "Unable to read from monitor client" #~ msgstr "Xen 데몬에서 읽기 실패" #, fuzzy #~ msgid "Unable to accept monitor client" #~ msgstr "파이프를 생성할 수 없" #, fuzzy #~ msgid "Unable to watch client socket" #~ msgstr "클라이언트 소켓 생성 실패" #, fuzzy #~ msgid "Cannot create signal pipe" #~ msgstr "파이프를 생성할 수 없" #, fuzzy #~ msgid "Unable to watch signal pipe" #~ msgstr "파이프를 생성할 수 없" #, fuzzy #~ msgid "Cannot install signal handler" #~ msgstr "마운트 이름공간을 공유 해제 할 수 없음" #, fuzzy #~ msgid "Unable to watch monitor socket" #~ msgstr "%s를 열 수 없음" #, fuzzy #~ msgid "Failed to query file context on %s" #~ msgstr "%s 네트워크를 정의하지 않기 실패" #~ msgid "Failed to accept a connection from driver" #~ msgstr "드라이버에서 연결을 받아들이는 데 실패" #~ msgid "Failed to create client socket" #~ msgstr "클라이언트 소켓 생성 실패" #~ msgid "Socket path %s too big for destination" #~ msgstr "소켓 경로 %s가 목적지에 대해 너무 큼" #~ msgid "Failed to connect to client socket" #~ msgstr "클라이언트 소켓 연결 실패" #~ msgid "%s" #~ msgstr "%s" #, fuzzy #~ msgid "cannot copy %s" #~ msgstr "%s를 열 수 없음" #, fuzzy #~ msgid "Invalid cpu number" #~ msgstr "잘못된 포트 번호: %s" #, fuzzy #~ msgid "Invalid stats count" #~ msgstr "잘못된 매개변수 갯수" #, fuzzy #~ msgid "Invalid cell number" #~ msgstr "잘못된 비밀정보" #, fuzzy #~ msgid "failed to update or add vcpupin xml of a running domain" #~ msgstr "도메인 xml을 얻는 데 실패" #, fuzzy #~ msgid "cannot modify bridge network device configuration" #~ msgstr "도메인의 영구 설정을 변경할 수 없음" #, fuzzy #~ msgid "cannot read total_bytes_sec" #~ msgstr "%s 통계를 읽을 수 없음" #, fuzzy #~ msgid "cannot read read_bytes_sec" #~ msgstr "응답 %s를 읽을 수 없음" #, fuzzy #~ msgid "cannot read write_bytes_sec" #~ msgstr "응답 %s를 읽을 수 없음" #, fuzzy #~ msgid "cannot read total_iops_sec" #~ msgstr "%s 통계를 읽을 수 없음" #, fuzzy #~ msgid "cannot read read_iops_sec" #~ msgstr "응답 %s를 읽을 수 없음" #, fuzzy #~ msgid "cannot read write_iops_sec" #~ msgstr "응답 %s를 읽을 수 없음" #~ msgid "cannot open SELinux virtual image context file %s" #~ msgstr "SELinux 가상 이미지 문맥 파일 '%s'를 열 수 없음" #, fuzzy #~ msgid "security model already defined for VM" #~ msgstr "보안 레이블이 VM에 대해 이미 정의되었습니다" #, fuzzy #~ msgid "could not initialize random generator" #~ msgstr "도메인 상태를 얻는 데 실패" #, fuzzy #~ msgid "Failed to get interface name of the VF" #~ msgstr "%s %s 인터페이스 상태 보기 실패" #, fuzzy #~ msgid "Shutting down $name: " #~ msgstr "'%s' 네트워크를 중지하는 중" #, fuzzy #~ msgid "failed to shutdown in time" #~ msgstr "도메인 %s를 종료하기 실패" #, fuzzy #~ msgid "Failed to determine domain's persistent state" #~ msgstr "호스트 이름을 결정하는 데 실패" #, fuzzy #~ msgid "Suspend a running domain for a given time duration." #~ msgstr "실행중인 도메인 중지." #, fuzzy #~ msgid "Failed to enumerate devices" #~ msgstr "장치 %s를 만드는 데 실패" #~ msgid "name of the inactive network" #~ msgstr "비활성화 네트워크 이름" #, fuzzy #~ msgid "missing support" #~ msgstr "제품 빠짐" #, fuzzy #~ msgid "dbus_bus_get failed" #~ msgstr "dup2(stdout)가 실패했습니다" #~ msgid "Error creating command for container" #~ msgstr "컨테이너에 대한 명령 생성 오류" #~ msgid "Failed to connect to system bus for PolicyKit auth: %s" #~ msgstr "PolicyKit auth에 대한 시스템 버스로 연결하는 데 실패했습니다: %s " #~ msgid "extra argument '%s'. See --help." #~ msgstr "추가 인자 '%s'. --help 참조." #~ msgid "missing type in hostdev" #~ msgstr "hostdev에 유형이 빠짐" #~ msgid "unknown node %s" #~ msgstr "알려지지 않은 노드 %s " #~ msgid "os type '%s' & arch '%s' combination is not supported" #~ msgstr "os 유형 '%s'과 arch '%s'의 조합은 지원하지 않습니다" #~ msgid "unknown size units '%s'" #~ msgstr "알려지지 크기 단위 %s" #~ msgid "capacity element value too large" #~ msgstr "용량 요소 값이 너무 큼" #, fuzzy #~ msgid "could not parse connection URI %s" #~ msgstr "연결 URI를 구문분석 할 수 없음" #~ msgid "cannot parse URI %s" #~ msgstr "URI %s를 구문분석할 수 없습니다" #, fuzzy #~ msgid "Device not found" #~ msgstr "비밀정보를 찾을 수 없음" #, fuzzy #~ msgid "pciGetVirtualFunctions is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #, fuzzy #~ msgid "pciDeviceIsVirtualFunction is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #, fuzzy #~ msgid "pciGetVirtualFunctionIndex is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #, fuzzy #~ msgid "pciDeviceNetName is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #, fuzzy #~ msgid "virNetlinkCommand is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #~ msgid "missing domain name information" #~ msgstr "도메인 이름 정보 부재" #~ msgid "xenDaemonDomainMigrate: invalid URI" #~ msgstr "xenDaemonDomainMigrate: 잘못된 URI" #~ msgid "configurable timezones are not supported" #~ msgstr "설정가능한 타임존을 지원하지 않습니다." #, fuzzy #~ msgid "persist interface state" #~ msgstr "영구적인 인터페이스 부착" #, fuzzy #~ msgid "Invalid value of %lu for memory size" #~ msgstr "메모리 크기에 대해 %d의 잘못된 값" #~ msgid "Unable to verify MaxMemorySize" #~ msgstr "최대 메모리 크기를 확인할 수 없음" #~ msgid "maximum memory limit in kilobytes" #~ msgstr "킬로바이트에서 최대 메모리 크기 제한" #~ msgid "Invalid value of %d for memory size" #~ msgstr "메모리 크기에 대해 %d의 잘못된 값" #, fuzzy #~ msgid "Max memory in kilobytes" #~ msgstr "킬로바이트에서 최대 메모리 크기 제한" #~ msgid "size of the vol with optional k,M,G,T suffix" #~ msgstr "볼륨 크기(k,M,G,T 점미사 지정 가능)" #~ msgid "initial allocation size with optional k,M,G,T suffix" #~ msgstr "최초 할당 크기(k,M,G,T 점미사 지정 가능)" #, fuzzy #~ msgid "new capacity for the vol with optional k,M,G,T suffix" #~ msgstr "볼륨 크기(k,M,G,T 점미사 지정 가능)" #~ msgid "persist device attachment" #~ msgstr "영구적인 장치 부착" #~ msgid "persist device detachment" #~ msgstr "영구적인 장치 탈착" #, fuzzy #~ msgid "persist device update" #~ msgstr "영구적인 장치 부착" #~ msgid "persist interface attachment" #~ msgstr "영구적인 인터페이스 부착" #~ msgid "persist interface detachment" #~ msgstr "영구적인 인터페이스 탈착" #~ msgid "persist disk attachment" #~ msgstr "영구적인 디스크 부착" #~ msgid "persist disk detachment" #~ msgstr "영구적인 디스크 탈착" #, fuzzy #~ msgid "unable to seek %s" #~ msgstr "%s를 열 수 없음" #~ msgid "Caller PID was too large %d" #~ msgstr "호출자의 PID가 너무 큽니다 %d" #, fuzzy #~ msgid "Caller identity was too large %d:%d" #~ msgstr "호출자의 PID가 너무 큽니다 %d" #~ msgid "Cannot invoke %s" #~ msgstr "%s를 호출할 수 없습니다" #~ msgid "Insufficient specification for drive address" #~ msgstr "불충분한 드라이브 주소 설정 값" #~ msgid "Insufficient specification for virtio serial address" #~ msgstr "불충분한 virtio 시리얼 주소 설정 값" #~ msgid "missing security type" #~ msgstr "보안 유형 빠짐" #, fuzzy #~ msgid "missing rom bar attribute" #~ msgstr "auth host 특성이 빠짐" #, fuzzy #~ msgid "Unknown field '%s'" #~ msgstr "알려지지 않은 유형 '%s'" #~ msgid "Field %s too big for destination" #~ msgstr "필드 %s가 목적지로는 너무 큽니다" #, fuzzy #~ msgid "invalid type for memory hard_limit tunable, expected a 'ullong'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "invalid type for memory soft_limit tunable, expected a 'ullong'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "invalid type for swap_hard_limit tunable, expected a 'ullong'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "Field memory hard limit too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "Field memory soft limit too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "Field swap hard limit too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #~ msgid "invalid type for cpu_shares tunable, expected a 'ullong'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "invalid type for vcpu_period tunable, expected a 'ullong'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "invalid type for vcpu_quota tunable, expected a 'llong'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #~ msgid "Invalid parameter `%s'" #~ msgstr "잘못된 매개변수 '%s'" #, fuzzy #~ msgid "cannot query persistent config of a transient domain" #~ msgstr "도메인의 영구 설정을 변경할 수 없음" #, fuzzy #~ msgid "can't get persistentDef" #~ msgstr "피어 소켓 식별자를 얻을 수 없습니다" #, fuzzy #~ msgid "invalid type for blkio weight tunable, expected a 'unsigned int'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "invalid type for weight tunable, expected a 'uint'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "Invalid parameter '%s'" #~ msgstr "잘못된 매개변수 '%s'" #, fuzzy #~ msgid "invalid type for device_weight tunable, expected a 'char *'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "invalid type for numa strict tunable, expected an 'int'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "invalid type for numa nodeset tunable, expected a 'string'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "Field '%s' too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "" #~ "invalid type for bandwidth average tunable, expected an 'unsigned int'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "invalid type for bandwidth peak tunable, expected an 'unsigned int'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "invalid type for bandwidth burst tunable, expected an 'unsigned int'" #~ msgstr "cpu_shares tunable에 대해 잘못된 유형, 'ullong'이 필요함" #, fuzzy #~ msgid "Unrecognized parameter %s" #~ msgstr "잘못된 매개변수 '%s'" #, fuzzy #~ msgid "no info for device '%s'" #~ msgstr "장치 %s에 대한 stat을 찾을 수 없습니다" #~ msgid "Failed to initialize random generator when creating iscsi interface" #~ msgstr "iscsi 인터페이스 생성 중 랜덤 생성기를 초기화하는 데 실패했습니다" #, fuzzy #~ msgid "interface with address '%s' not found" #~ msgstr "MAC 주소가 %s인 인터페이스를 찾을 수 없음" #, fuzzy #~ msgid "Interface with address '%s' not found." #~ msgstr "인터페이스를 찾을 수 없음" #, fuzzy #~ msgid "no such device in %s" #~ msgstr "도메인 %s는 없음" #~ msgid "event queue is empty, nothing to pop" #~ msgstr "이벤트 큐가 비어있으며, 꺼낼 이벤트가 없습니다" #~ msgid "parsing cpuinfo processor" #~ msgstr "cpuinfo 프로세서 구문 분석 중" #, fuzzy #~ msgid "parsing cpuinfo cpu cores %c" #~ msgstr "cpuinfo cpu MHz 구문 분석 중" #, fuzzy #~ msgid "parsing number of processors %c" #~ msgstr "cpuinfo 프로세서 구문 분석 중" #, fuzzy #~ msgid "cannot get persistent config of a transient domain" #~ msgstr "도메인의 영구 설정을 변경할 수 없음" #~ msgid "no event support" #~ msgstr "이벤트 지원 없음" #~ msgid "incorrect root element" #~ msgstr "바르지 않은 루트 요소" #~ msgid "path is NULL" #~ msgstr "패스가 NULL입니다" #, fuzzy #~ msgid "Unable to initialize bridging" #~ msgstr "인증서를 초기화할 수 없습니다: %s" #~ msgid "Failed to add %s device to %s" #~ msgstr "%s 장치를 %s에 추가 실패" #~ msgid "Invalid type for cpu_shares tunable, expected a 'ullong'" #~ msgstr "cpu_shares에 대한 잘못된 유형. 'ullong' 필요함" #, fuzzy #~ msgid "failed to set cpu_shares=%llu" #~ msgstr "cpu shares tunable을 설정할 수 없음" #~ msgid "Field cpu_shares too big for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 큼" #, fuzzy #~ msgid "Failed to enable '%s'" #~ msgstr "%s 장치 활성화 실패" #~ msgid "cannot initialize bridge support" #~ msgstr "브리지 지원을 초기화 할 수 없음" #, fuzzy #~ msgid "cannot set IP address on bridge '%s'" #~ msgstr "'%s'에서 '%s'로의 브리지 상에 IP주소 설정할 수 없음" #~ msgid "cannot create bridge '%s'" #~ msgstr "브리지 '%s'를 만들 수 없음" #, fuzzy #~ msgid "" #~ "cannot create dummy tap device '%s' to set mac address on bridge '%s'" #~ msgstr "브리지 '%s'상의 mac 주소를 팔터링할 수 없음" #, fuzzy #~ msgid "cannot set forward delay on bridge '%s'" #~ msgstr "'%s'에서 '%s'로의 브리지 상에 IP주소 설정할 수 없음" #, fuzzy #~ msgid "cannot set STP '%s' on bridge '%s'" #~ msgstr "'%s'에서 '%s'로의 브리지 상에 IP주소 설정할 수 없음" #, fuzzy #~ msgid "cannot find value for '%s'" #~ msgstr "%s의 값 구문 분석 실패" #, fuzzy #~ msgid "cannot create temporary file" #~ msgstr "파이프를 생성할 수 없음" #, fuzzy #~ msgid "cannot write string to file" #~ msgstr "%s 설정 파일 쓰기 실패" #~ msgid "No support for macvtap device" #~ msgstr "macvtab 장치를 지원하지 않음" #~ msgid "Failed to add tap interface '%s' to bridge '%s'" #~ msgstr "'%s' 탭 인터페이스를 '%s' 브리지에 추가하는 데 실패" #, fuzzy #~ msgid "cannot get live and persistent info concurrently" #~ msgstr "기존 비밀정보의 개인용 플래그를 변경할 수 없음" #, fuzzy #~ msgid "cannot query live and config together" #~ msgstr "%s에 대한 설정을 제거할 수 없음" #, fuzzy #~ msgid "could not find path for descriptor" #~ msgstr "'%s'에 대한 부모 HBA를 찾을 수 없습니다" #, fuzzy #~ msgid "Cleanup failed %d" #~ msgstr "작업 실패: %s" #, fuzzy #~ msgid "ifaceGetFlags is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #~ msgid "interface %s does not exist" #~ msgstr "인터페이스 %s가 존재하지 않습니다" #, fuzzy #~ msgid "ifaceGetIndex is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #, fuzzy #~ msgid "ifaceGetVlanID is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #, fuzzy #~ msgid "ifaceMacvtapLinkAdd is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #, fuzzy #~ msgid "ifaceLinkDel is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #, fuzzy #~ msgid "ifaceMacvtapLinkDump is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #, fuzzy #~ msgid "ifaceGetNthParent is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #, fuzzy #~ msgid "" #~ "Getting MAC address from '%s' to '%02x:%02x:%02x:%02x:%02x:%02x' failed." #~ msgstr "네트워크 장치 %02x:%02x:%02x:%02x:%02x:%02x 를 찾을 수 없음" #, fuzzy #~ msgid "" #~ "Setting MAC address on '%s' to '%02x:%02x:%02x:%02x:%02x:%02x' failed." #~ msgstr "네트워크 장치 %02x:%02x:%02x:%02x:%02x:%02x 를 찾을 수 없음" #, fuzzy #~ msgid "ifaceIsVirtualFunction is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #, fuzzy #~ msgid "ifaceGetVirtualFunctionIndex is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #, fuzzy #~ msgid "ifaceGetPhysicalFunction is not supported on non-linux platforms" #~ msgstr "CPU 친화도 처리가 이 플랫폼에서는 지원되지 않습니다" #~ msgid "" #~ "cannot 'up' interface %s -- another macvtap device may be 'up' and have " #~ "the same MAC address" #~ msgstr "" #~ "인터페이스 %s를 'up'할 수 없습니다 -- 동일한 MAC 주소를 가지고 있는 다른 " #~ "macvtap 장치가 'up'상태인 것 같습니다." #, fuzzy #~ msgid "could not determin max vcpus for the domain" #~ msgstr "도메인에 대해 최대 vcpu를 결정할 수 없음" #~ msgid "cannot create config file '%s'" #~ msgstr "설정 파일 '%s'를 만들 수 없음" #~ msgid "cannot save config file '%s'" #~ msgstr "설정 파일 '%s'에 저장할 수 없음" #~ msgid "cannot create config file %s" #~ msgstr "%s 설정 파일 생성 실패" #~ msgid "cannot write config file %s" #~ msgstr "%s 설정 파일 쓰기 실패" #~ msgid "cannot save config file %s" #~ msgstr "%s 설정 파일 저장 실패" #, fuzzy #~ msgid "Parameter array must have space for 1 item" #~ msgstr "장치 주소 유형이 지정되지 않았습니다" #~ msgid "Failed to symlink /dev/pts/0 to /dev/tty1" #~ msgstr "/dev/tty1에 대한 심볼릭 링크 /dev/pts/0을 만드는 데 실패" #~ msgid "Failed to unmount '%s'" #~ msgstr "'%s'를 마운트 해제하는 데 실패" #~ msgid "read of fd %d failed" #~ msgstr "fd %d에서 읽기가 실패했습니다" #~ msgid "epoll_ctl(appPty) failed" #~ msgstr "epoll_ctl(appPty)가 실패했습니다" #~ msgid "epoll_ctl(contPty) failed" #~ msgstr "epoll_ctl(contPty)가 실패했습니다" #~ msgid "epoll_ctl(monitor) failed" #~ msgstr "epoll_ctl(monitor)가 실패했습니다" #~ msgid "epoll_ctl(client) failed" #~ msgstr "epoll_ctl(client)가 실패했습니다" #, fuzzy #~ msgid "accept(monitor,...) failed" #~ msgstr "epoll_ctl(monitor)가 실패했습니다" #~ msgid "error event %d" #~ msgstr "오류 이벤트 %d" #~ msgid "epoll_wait() failed" #~ msgstr "epoll_wait()가 실패했습니다" #, fuzzy #~ msgid "Field weight too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #~ msgid "cannot enable %s" #~ msgstr "%s를 활성화 할 수 없음" #, fuzzy #~ msgid "Found namespace '%s' doesn't match expected '%s'" #~ msgstr "네트워크 설정 파일명 '%s'는 네트워크 이름 '%s'와 부합하지 않습니다" #, fuzzy #~ msgid "Failed to write snapshot data to %s" #~ msgstr "저장 헤더를 '%s'에 쓰는 데 실패" #, fuzzy #~ msgid "Field blkio weight too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #~ msgid "Field cpu_shares too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "Field vcpu_period too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "Field vcpu_quota too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "Field write bytes too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "Field write requests too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "Field read bytes too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "Field read requests too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "Field flush requests too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "Field write total times too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "Field read total times too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #, fuzzy #~ msgid "Field flush total times too long for destination" #~ msgstr "필드 cpu_shares가 목적지에 대해 너무 긺" #~ msgid "getaddrinfo failed for '%s': %s" #~ msgstr "'%s'에 대한 getaddrinfo 실패: %s" #~ msgid "unexpected Xen URI path '%s', try ///var/lib/xen/xend-socket" #~ msgstr "" #~ "예기치 못한 Xen URI 경로 '%s', ///var/lib/xen/xend-socket을 시도해 보십시" #~ "오" #~ msgid "undefine an inactive domain" #~ msgstr "비활성화 도메인을 정의하지 않음" #~ msgid "Failed to open pid file '%s' : %s" #~ msgstr "'%s' pid 파일 열기에 실패했습니다: %s " #~ msgid "Failed to fdopen pid file '%s' : %s" #~ msgstr "'%s' pid 파일 fdopen에 실패했습니다: %s " #, fuzzy #~ msgid "%s: Failed to close pid file '%s' : %s" #~ msgstr "'%s' pid 파일 닫기에 실패했습니다: %s " #~ msgid "Cannot delete active domain" #~ msgstr "활성화된 도메인을 삭제할 수 없음" #, fuzzy #~ msgid "cannot create logger for libxenlight" #~ msgstr "로그 디렉터리 %s를 생성할 수 없음" #, fuzzy #~ msgid "cannot initialize libxenlight context" #~ msgstr "모니터 뮤텍스를 초기화할 수 없음" #, fuzzy #~ msgid "cannot undefine active domain" #~ msgstr "동작중인 도메인을 삭제할 수 없음" #, fuzzy #~ msgid "Failed to allocate memory for PCI device name" #~ msgstr "버퍼 메모리 할당에 실패했습니다" #~ msgid "invalid path" #~ msgstr "잘못된 경로" #, fuzzy #~ msgid "no domain snapshot parent with matching name '%s'" #~ msgstr "이름이 '%s'와 일치하는 도메인이 없음" #~ msgid "cannot open tunnelled migration socket" #~ msgstr "터널링을 사용한 마이그레이션 소켓을 열수 없음" #~ msgid "Unix socket '%s' too big for destination" #~ msgstr "유닉스 소켓 '%s'가 목적지로 너무 큼" #~ msgid "Cannot bind to unix socket '%s' for tunnelled migration" #~ msgstr "유닉스 소켓 '%s'를 터널링을 사용한 이전을 위해 바인드할 수 없음" #~ msgid "Cannot listen on unix socket '%s' for tunnelled migration" #~ msgstr "터널링을 사용한 이전을 위해 유닉스 소켓 '%s'를 listen할 수 없음" #, fuzzy #~ msgid "Cannot change unix socket '%s' owner" #~ msgstr "'%d' 사용자로 변경할 수 없음" #~ msgid "tunnelled migration monitor command failed" #~ msgstr "터널링을 사용한 이전 모니터 명령이 실패했습니다" #~ msgid "migrate failed" #~ msgstr "이전이 실패했습니다" #~ msgid "tunnelled migration failed to accept from qemu" #~ msgstr "터널링을 사용한 이전이 qemu에서 받아들여지는 데 실패했습니다" #~ msgid "could not parse memory balloon allocation from '%s'" #~ msgstr "'%s'로부터의 메모리 풍선 할당을 구문 분석 할 수 없음" #, fuzzy #~ msgid "Failed to change group ID of '%s' to %u" #~ msgstr "%s의 그룹 소유권을 변경하는 데 실패했습니다" #~ msgid "creating xpath context" #~ msgstr "xpath 문맥 생성하는 중" #~ msgid "Domain '%s' is still running" #~ msgstr "도메인 '%s'가 여전히 실행중입니다" #~ msgid "invalid argument in" #~ msgstr "잘못된 인수" #~ msgid "failed to urlencode the create S-Expr" #~ msgstr "생성된 S-Expr를 urlencode하기 실패" #~ msgid "xenDaemonDomainFetch failed to find this domain" #~ msgstr "xenDaemonDomainFetch이 이 도메인을 찾는 데 실패했습니다" #~ msgid "" #~ "a running domain like %s cannot be undefined;\n" #~ "to undefine, first shutdown then undefine using its name or UUID" #~ msgstr "" #~ "%s와 같은 실행중인 도메인의 정의를 없앨 수 없습니다;\n" #~ "정의를 없애려면, 우선 종료를 한 다음에 도메인 이름이나 UUID를 사용해 정의" #~ "를 해제하십시오" #, fuzzy #~ msgid "Domain snapshot %s created\n" #~ msgstr "%s 에서 생성된 도메인 %s\n" #, fuzzy #~ msgid "missing monitor command" #~ msgstr "모니터 명령 '%s'를 보낼 수 없음" #~ msgid "Failed to mount /proc" #~ msgstr "/proc을 마운트하는 데 실패" #, fuzzy #~ msgid "Failed to clear cloexec flag" #~ msgstr "파일 열기 실패" #, fuzzy #~ msgid "can't save config" #~ msgstr "%s 설정 파일 저장 실패" #~ msgid "Failed to set close-on-exec file descriptor flag" #~ msgstr "" #~ "exec시 닫기(close-on-exec) 디스크립터 플래그를 설정하는 데 실패했습니다" #~ msgid "Destroy a given domain." #~ msgstr "주어진 도메인 강제 종료.." #, fuzzy #~ msgid "idle :" #~ msgstr "유휴상태" #~ msgid "Destroy a given pool." #~ msgstr "주어진 풀을 파괴" #, fuzzy #~ msgid "Missing required option '%s'" #~ msgstr "%s에 있는 root 장치 정보 부재" #~ msgid "type (%d) != REMOTE_CALL" #~ msgstr "유형 (%d) != REMOTE_CALL " #~ msgid "status (%d) != REMOTE_OK" #~ msgstr "상태 (%d) != REMOTE_OK " #~ msgid "parse args failed" #~ msgstr "args 구문 분석에 실패했습니다" #, fuzzy #~ msgid "failed to serialize reply header" #~ msgstr "S-Expr 나열하기 실패" #, fuzzy #~ msgid "failed to change XDR reply offset" #~ msgstr "%s의 그룹 소유권을 변경하는 데 실패했습니다" #, fuzzy #~ msgid "failed to update reply length header" #~ msgstr "qemu 헤더를 읽는 것을 실패" #~ msgid "Cannot access %s '%s': %s" #~ msgstr "%s '%s' 액세스할 수 없습니다: %s " #~ msgid "gnutls_certificate_allocate_credentials: %s" #~ msgstr "gnutls_certificate_allocate_credentials: %s" #~ msgid "gnutls_certificate_set_x509_trust_file: %s" #~ msgstr "gnutls_certificate_set_x509_trust_file: %s" #~ msgid "gnutls_certificate_set_x509_crl_file: %s" #~ msgstr "gnutls_certificate_set_x509_crl_file: %s" #~ msgid "gnutls_certificate_set_x509_key_file: %s" #~ msgstr "gnutls_certificate_set_x509_key_file: %s" #~ msgid "gnutls_dh_params_init: %s" #~ msgstr "gnutls_dh_params_init: %s" #~ msgid "gnutls_dh_params_generate2: %s" #~ msgstr "gnutls_dh_params_generate2: %s" #~ msgid "Failed to allocate memory for struct qemud_socket" #~ msgstr "구조체 qemud_socket에 대한 메모리 할당이 실패했습니다" #, fuzzy #~ msgid "Failed to copy socket address: %s" #~ msgstr "소켓 주소를 얻는 데 실패했습니다: %s" #~ msgid "Failed to listen for connections on '%s': %s" #~ msgstr "'%s'로의 연결을 listen는데 실패했습니다: %s " #~ msgid "getaddrinfo: %s" #~ msgstr "getaddrinfo: %s" #~ msgid "socket: %s" #~ msgstr "소켓: %s " #~ msgid "bind: %s" #~ msgstr "바인드: %s " #~ msgid "remoteListenTCP: calloc: %s" #~ msgstr "remoteListenTCP: calloc: %s" #~ msgid "remoteListenTCP: listen: %s" #~ msgstr "remoteListenTCP: listen: %s" #~ msgid "Failed to change group ownership of %s" #~ msgstr "%s의 그룹 소유권을 변경하는 데 실패했습니다" #~ msgid "Failed to allocate struct qemud_server" #~ msgstr "구조체 qemud_server 할당에 실패했습니다" #~ msgid "Failed to initialize SASL authentication %s" #~ msgstr "SASL 인증 %s를 초기화하는 데 실패했습니다" #~ msgid "Failed to add server event callback" #~ msgstr "서버 이벤트 콜백을 추가하는 데 실패했습니다." #~ msgid "remoteInitializeTLSSession: %s" #~ msgstr "remoteInitializeTLSSession: %s" #, fuzzy #~ msgid "The client certificate is not trusted." #~ msgstr "인증서가 신뢰할 수 없습니다" #, fuzzy #~ msgid "The client certificate has unknown issuer." #~ msgstr "인증서의 발급자가 알려지지 않았습니다" #, fuzzy #~ msgid "The client certificate has been revoked." #~ msgstr "인증서가 폐기되었습니다" #, fuzzy #~ msgid "The client certificate uses an insecure algorithm." #~ msgstr "인증서가 안전하지 않은 알고리즘을 사용합니다" #~ msgid "remoteCheckCertificate: failed to verify client's certificate" #~ msgstr "remoteCheckCertificate: 클라이언트 인증서 확인에 실패했습니다" #~ msgid "client had unexpected data pending tx after access check" #~ msgstr "" #~ "억세스 체크 후 클라이언트가 예기치 못한 데이터 송신 중단을 만났습니다" #~ msgid "Failed to accept connection: %s" #~ msgstr "연결 허용에 실패했습니다: %s" #, fuzzy #~ msgid "Failed to format addresss: out of memory" #~ msgstr "메모리 할당 실패" #~ msgid "Out of memory allocating clients" #~ msgstr "클라이언트 할당할 메모리가 부족합니다" #, fuzzy #~ msgid "TLS handshake failed for client %s: %s" #~ msgstr "TLS 핸드세이크에 실패했습니다: %s" #~ msgid "read: %s" #~ msgstr "읽기: %s " #~ msgid "gnutls_record_recv: %s" #~ msgstr "gnutls_record_recv: %s" #~ msgid "write: %s" #~ msgstr "쓰기: %s " #~ msgid "gnutls_record_send: %s" #~ msgstr "gnutls_record_send: %s" #~ msgid "Signal handler reported %d errors: last error: %s" #~ msgstr "시그널 핸들러가 %d 오류를 보고했습니다: 마지막 오류: %s" #~ msgid "Failed to allocate workers" #~ msgstr "작업자 할당에 실패했습니다" #~ msgid "remoteReadConfigFile: %s" #~ msgstr "remoteReadConfigFile: %s" #~ msgid "Failed to allocate memory for buffer" #~ msgstr "버퍼 메모리 할당에 실패했습니다" #~ msgid "Failed to reallocate enough memory for buffer" #~ msgstr "버퍼에 대해 충분한 메모리를 재할당하는 데 실패했습니다" #~ msgid "Failed to lookup group '%s'" #~ msgstr "그룹 '%s' 검색에 실패했습니다" #~ msgid "Failed to register callback for signal pipe" #~ msgstr "시그널 파이프에 대한 콜백을 등록하는 데 실패했습니다" #~ msgid "cpumap_len > REMOTE_CPUMAP_MAX" #~ msgstr "cpumap_len > REMOTE_CPUMAP_MAX" #~ msgid "failed to get sock address: %s" #~ msgstr "소켓 주소를 얻는 데 실패했습니다: %s" #~ msgid "failed to get peer address: %s" #~ msgstr "피어 주소를 얻는 데 실패했습니다: %s" #~ msgid "sasl context setup failed %d (%s)" #~ msgstr "sasl 문맥 설정에 실패했습니다 %d (%s)" #~ msgid "cannot get TLS cipher size" #~ msgstr "TLS 암호 사이즈를 얻을 수 없습니다" #~ msgid "cannot set SASL external SSF %d (%s)" #~ msgstr "SASL 외부 SSF를 설정할 수 없습니다 %d (%s)" #~ msgid "cannot set SASL security props %d (%s)" #~ msgstr "SASL 보안 props를 설정할 수 없습니다 %d (%s)" #~ msgid "cannot allocate mechlist" #~ msgstr "mechlist를 할당할 수 없습니다" #~ msgid "out of memory copying username" #~ msgstr "사용자명 복사 중 메모리 부족" #~ msgid "sasl start failed %d (%s)" #~ msgstr "sasl start가 실패했습니다 %d (%s)" #~ msgid "sasl step failed %d (%s)" #~ msgstr "sasl step이 실패했습니다 %d (%s)" #~ msgid "client tried unsupported SASL init request" #~ msgstr "클라이언트가 지원하지 않는 SASL 초기화 요청을 시도했습니다" #~ msgid "client tried unsupported SASL start request" #~ msgstr "클라이언트가 지원하지 않는 SASL 시작 요청을 시도했습니다" #~ msgid "client tried unsupported SASL step request" #~ msgstr "클라이언트가 지원하지 않는 SASL 스텝 요청을 시도했습니다" #~ msgid "Volume key %s too large for destination" #~ msgstr "볼륨 키 %s가 목적지에 대해 너무 큼" #~ msgid "failed to find libvirtd binary" #~ msgstr "libvirtd 바이너리를 찾는 데 실패" #~ msgid "unable to connect to libvirtd at '%s'" #~ msgstr "'%s'의 libvirtd에 연결할 수 없음" #~ msgid "Socket %s too big for destination" #~ msgstr "소켓 %s가 목적지에 대해 너무 큽니다" #~ msgid "unable to connect to '%s', libvirtd may need to be started" #~ msgstr "'%s'에 연결할 수 없음. libvirtd를 시작해야 할지도 모릅니다" #~ msgid "unable to auto-detect URI" #~ msgstr "URI를 자동 감지 할 수 없음" #~ msgid "Cannot access %s '%s'" #~ msgstr "%s '%s'를 억세스할 수 없음" #, fuzzy #~ msgid "unable to load private key '%s' and/or certificate '%s': %s" #~ msgstr "비밀 키/인증서를 읽어들일 수 없음: %s" #~ msgid "unable to set session credentials: %s" #~ msgstr "세션 크레덴셜을 설정할 수 없음: %s" #~ msgid "unable to complete TLS handshake: %s" #~ msgstr "TLS 핸드세이크를 완료할 수 없음: %s" #~ msgid "unable to complete TLS initialization: %s" #~ msgstr "TLS 초기화를 완료할 수 없음: %s" #~ msgid "Certificate type is not X.509" #~ msgstr "인증서 유형이 X.509가 아닙니다" #~ msgid "gnutls_certificate_get_peers failed" #~ msgstr "gnutls_certificate_get_peers가 실패했습니다" #~ msgid "failed to get sock address" #~ msgstr "소켓 주소를 얻는 데 실패" #~ msgid "failed to get peer address" #~ msgstr "피어 주소를 얻는 데 실패" #~ msgid "Failed SASL step: %d (%s)" #~ msgstr "실패한 SASL 단계: %d (%s)" #, fuzzy #~ msgid "Unable to demarshal lifecycle event" #~ msgstr "모니터 이벤트를 등록할 수 없음" #, fuzzy #~ msgid "Unable to demarshal reboot event" #~ msgstr "모니터 이벤트를 등록할 수 없음" #, fuzzy #~ msgid "Unable to demarshal RTC change event" #~ msgstr "모니터 이벤트를 등록할 수 없음" #, fuzzy #~ msgid "Unable to demarshal watchdog event" #~ msgstr "모니터 이벤트를 등록할 수 없음" #, fuzzy #~ msgid "Unable to demarshal IO error event" #~ msgstr "모니터 이벤트를 등록할 수 없음" #, fuzzy #~ msgid "Unable to demarshal IO error reason event" #~ msgstr "모니터 이벤트를 등록할 수 없음" #, fuzzy #~ msgid "Unable to demarshal graphics event" #~ msgstr "모니터 이벤트를 등록할 수 없음" #, fuzzy #~ msgid "unable to demarshall reboot event" #~ msgstr "모니터 이벤트를 등록할 수 없음" #~ msgid "xdr_remote_message_header failed" #~ msgstr "xdr_remote_message_header 실패" #~ msgid "data size %zu too large for payload %d" #~ msgstr "데이터 크기 %zu가 페이로드 %d에 대해 너무 큼" #~ msgid "xdr_u_int (length word)" #~ msgstr "xdr_u_int (길이 워드)" #~ msgid "cannot send data" #~ msgstr "데이터 전송할 수 없음" #~ msgid "failed to read from TLS socket %s" #~ msgstr "TLS 소켓 %s에서 읽는 데 실패" #~ msgid "server closed connection" #~ msgstr "서버가 연결을 닫았습니다" #~ msgid "server closed connection: %s" #~ msgstr "서버가 연결을 닫았습니다: %s" #~ msgid "xdr_u_int (length word, reply)" #~ msgstr "xdr_u_int (길이 워드, 응답)" #~ msgid "invalid header in reply" #~ msgstr "잘못된 응답 헤더" #~ msgid "unknown program (received %x, expected %x)" #~ msgstr "알려지지 않은 프로그램 (%x 받음, %x 기다림)" #~ msgid "unknown protocol version (received %x, expected %x)" #~ msgstr "알려지지 않은 프로토콜 버전 (%x 받음, %x 기다림)" #~ msgid "unknown procedure (received %x, expected %x)" #~ msgstr "알려지지 않은 절차 (%x 받음, %x 기다림)" #~ msgid "unknown status (received %x)" #~ msgstr "알려지지 않은 상태 (%x 받음)" #, fuzzy #~ msgid "unmarshaling remote_error" #~ msgstr "언마샬링 remote_error" #, fuzzy #~ msgid "failed to wake up polling thread: %s" #~ msgstr "'%s' 읽기 위한 파이프 생성에 실패" #~ msgid "cannot generate AppArmor profile '%s'" #~ msgstr "AppArmor 프로파일 '%s'를 생성할 수 없음" #~ msgid "cannot wait for '%s'" #~ msgstr "'%s'를 기다릴 수 없음" #, fuzzy #~ msgid "'%s' exited unexpectedly: %s" #~ msgstr "예상외의 시그널 %d 수신했습니다" #~ msgid "Domain shut off, virtual CPUs not present." #~ msgstr "도메인 종료, 가상 CPU가 없음." #~ msgid "" #~ "cpulist: %s: Invalid format. Expecting digit at position %d (near '%c')." #~ msgstr "cpulist: %s: 잘못된 포맷. %d ('%c' 주변)에 숫자로 표기" #~ msgid "" #~ "cpulist: %s: Invalid format. Expecting digit or comma at position %d " #~ "(near '%c')." #~ msgstr "cpulist: %s: 잘못된 포맷. %d ('%c' 주변)에 숫자 또는 콤마로 표기" #~ msgid "cpulist: %s: Invalid format. Trailing comma at position %d." #~ msgstr "cpulist: %s: 잘못된 포맷. %d로 마지막을 콤마로 표기" #~ msgid "Reloading configuration on SIGHUP" #~ msgstr "SIGHUP을 받아서 설정을 다시 불러오는 중입니다" #~ msgid "Received unexpected signal %d" #~ msgstr "예상외의 시그널 %d 수신했습니다" #~ msgid "" #~ "remoteCheckCertificate: tls_no_verify_certificate is set so the bad " #~ "certificate is ignored" #~ msgstr "" #~ "remoteCheckCertificate: tls_no_verify_certificate이 설정되었기 때문에, 나" #~ "쁜 인증서가 무시됩니다." #, fuzzy #~ msgid "Turn off polkit auth for privileged client pid %d from %s" #~ msgstr "권한을 획득한 클라이언트 %d에 대한 polkit 인증을 끕니다" #~ msgid "unknown type" #~ msgstr "알려지지 않은 유형" #~ msgid "Checking PID %d running as %d" #~ msgstr "PID %d가 %d로 실행되는 것을 확인중" #~ msgid "Policy allowed action %s from pid %d, uid %d" #~ msgstr "Policy가 동작 %s를 pid %d, uid %d에 대해 허용했습니다" #~ msgid "Policy allowed action %s from pid %d, uid %d, result %s" #~ msgstr "Policy kit가 동작 %s를 pid %d, uid %d에 대해 허용했습니다. 결과: %s" #~ msgid "cannot extract boot device" #~ msgstr "부트 장치를 추출할 수 없음" #~ msgid "cannot extract filesystem devices" #~ msgstr "파일시스템 장치를 추출할 수 없음" #~ msgid "cannot extract network devices" #~ msgstr "네트워크 장치를 추출할 수 없음" #, fuzzy #~ msgid "cannot extract smartcard devices" #~ msgstr "와치독 장치를 추출할 수 없음" #~ msgid "cannot extract serial devices" #~ msgstr "직렬 장치를 추출할 수 없음" #~ msgid "cannot extract channel devices" #~ msgstr "채널 장치를 추출할 수 없음" #~ msgid "cannot extract input devices" #~ msgstr "입력 장치를 추출할 수 없음" #~ msgid "cannot extract graphics devices" #~ msgstr "그래픽 장치를 추출할 수 없음" #~ msgid "cannot extract sound devices" #~ msgstr "사운드 장치를 추출할 수 없음" #~ msgid "cannot extract video devices" #~ msgstr "비디오 장치를 추출할 수 없음" #~ msgid "cannot extract host devices" #~ msgstr "호스트 장치를 추출할 수 없음" #~ msgid "cannot extract watchdog devices" #~ msgstr "와치독 장치를 추출할 수 없음" #, fuzzy #~ msgid "cannot extract memory balloon devices" #~ msgstr "직렬 장치를 추출할 수 없음" #~ msgid "bridge interfaces" #~ msgstr "브리지 인터페이스" #~ msgid "error parsing storage capabilities for '%s'" #~ msgstr "'%s'에 대한 저장 용량 구문분석 중 오류" #~ msgid "error parsing SCSI host capabilities for '%s'" #~ msgstr "'%s'에 대한 SISI 호스트 용량을 구문 분석 할 수 없음" #~ msgid "bad spec" #~ msgstr "나쁜 명세" #~ msgid "cannot extract volume encryption secrets" #~ msgstr "볼륨 암호화 비밀 추출 실패" #, fuzzy #~ msgid "couldn't find interface with MAC address '%s' (netcf: %s - %s)" #~ msgstr "MAC 주소가 %s인 인터페이스를 찾을 수 없음" #, fuzzy #~ msgid "failed to undefine interface %s (netcf: %s - %s)" #~ msgstr "인터페이스 %s 정의를 해제하는 데 실패" #~ msgid "Cannot wait for '%s'" #~ msgstr "'%s'를 기다릴 수 없음" #~ msgid "Container '%s' unexpectedly shutdown during startup" #~ msgstr "시작 중 컨테이너 '%s' 예기치 못한 종료" #~ msgid "Reloading iptables rules" #~ msgstr "iptables 규칙 다시 읽는 중" #, fuzzy #~ msgid "Starting up network '%s'" #~ msgstr "'%s' 네트워크를 중지하는 중" #~ msgid "Shutting down network '%s'" #~ msgstr "'%s' 네트워크를 중지하는 중" #, fuzzy #~ msgid "Creating network '%s'" #~ msgstr "'%s' 네트워크를 중지하는 중" #, fuzzy #~ msgid "Defining network '%s'" #~ msgstr "네트워크 정의" #, fuzzy #~ msgid "Undefining network '%s'" #~ msgstr "비활성화 네트워크를 정의하지 않음" #~ msgid "Could not exec %s" #~ msgstr "%s를 실행할 수 없음" #, fuzzy #~ msgid "Defining domain '%s'" #~ msgstr "'%s' 도메인 보기 실패" #, fuzzy #~ msgid "Creating domain '%s'" #~ msgstr "'%s' 도메인 보기 실패" #, fuzzy #~ msgid "Undefining domain '%s'" #~ msgstr "도메인 %s를 정의하지 않기 실패" #~ msgid "Cannot determine QEMU argv syntax %s" #~ msgstr "QEMU argv 문법 %s를 결정할 수 없음" #~ msgid "Failed to write migration data to remote libvirtd" #~ msgstr "원격 libvirtd에 이전 데이터를 기록하는 것에 실패" #~ msgid "Cannot extract Qemu version from '%s'" #~ msgstr "'%s'에서 Qemu 버전을 추출할 수 없음" #~ msgid "cannot parse JSON doc '%s'" #~ msgstr "JSON 문서 '%s'를 구문 분석할 수 없음" #~ msgid "failed to build logfile name %s/%s.log" #~ msgstr "로그파일 이름 %s/%s.log를 만드는 데 실패" #~ msgid "Failed to send SIGTERM to %s (%d)" #~ msgstr "SIGTERM을 %s (%d)에 보내는 데 실패" #, fuzzy #~ msgid "remoteDomainGetMemoryParameters: unknown parameter type" #~ msgstr "remoteDomainGetSchedulerParameters: 알려지지 않은 매개변수 유형" #, fuzzy #~ msgid "remoteDomainGetBlkioParameters: unknown parameter type" #~ msgstr "remoteDomainGetSchedulerParameters: 알려지지 않은 매개변수 유형" #~ msgid "too many remote domain names: %d > %d" #~ msgstr "너무 많은 원격 도메인 이름: %d > %d" #~ msgid "" #~ "remoteDomainGetSchedulerParameters: returned number of parameters exceeds " #~ "limit" #~ msgstr "" #~ "remoteDomainGetSchedulerParameters: 반환된 매개변수 갯수가 범위를 초과합니" #~ "다" #~ msgid "remoteDomainGetSchedulerParameters: unknown parameter type" #~ msgstr "remoteDomainGetSchedulerParameters: 알려지지 않은 매개변수 유형" #~ msgid "too many remote networks: %d > %d" #~ msgstr "원격 네트워크가 너무 많음: %d > %d" #~ msgid "too many remote interfaces: %d > %d" #~ msgstr "원격 인터페이스가 너무 많음: %d > %d" #~ msgid "too many storage pools requested" #~ msgstr "너무 많은 저장소 풀이 요청됨" #~ msgid "too many storage pools received" #~ msgstr "너무 많은 저장소 풀을 받음" #~ msgid "too many storage volumes requested" #~ msgstr "너무 많은 저장소 볼륨이 요청됨" #~ msgid "too many storage volumes received" #~ msgstr "너무 많은 저장소 볼륨을 받음" #~ msgid "too many device names received" #~ msgstr "너무 많은 장치 이름을 받음" #~ msgid "too many capability names requested" #~ msgstr "너무 많은 기능 이름이 요청됨" #~ msgid "too many capability names received" #~ msgstr "너무 많은 기능 이름을 받음" #~ msgid "marking cb for deletion" #~ msgstr "cb를 삭제하도록 표시" #~ msgid "removing cb from list" #~ msgstr "cb를 리스트에서 제거" #~ msgid "too many remote secret UUIDs: %d > %d" #~ msgstr "너무 많은 원격 비밀 UUID: %d > %d" #, fuzzy #~ msgid "too many remote domain snapshot names: %d > %d" #~ msgstr "너무 많은 원격 도메인 이름: %d > %d" #, fuzzy #~ msgid "too many remote domain snapshots: %d > %d" #~ msgstr "너무 많은 원격 도메인 이름: %d > %d" #~ msgid "marshalling args" #~ msgstr "마셜링 인자들" #~ msgid "unmarshalling ret" #~ msgstr "반환값 언마샬링" #, fuzzy #~ msgid "Failed to reap virt-aa-helper pid %lu" #~ msgstr "파이프 생성에 실패했습니다: %s" #, fuzzy #~ msgid "Unexpected status from virt-aa-helper pid %lu: %s" #~ msgstr "virt-aa-helper %d pid %lu로부터 예기치 않은 종료 상태" #, fuzzy #~ msgid "could not get XML error" #~ msgstr "디렉터리 %s를 열 수 없음" #~ msgid "Cannot set gid to %u before creating %s" #~ msgstr "gid를 %u로 %s를 생성하기 전에 설정할 수 없음" #~ msgid "Cannot set uid to %u before creating %s" #~ msgstr "uid를 %u로 %s를 생성하기 전에 설정할 수 없음" #, fuzzy #~ msgid "Unable to read '%s -h' output" #~ msgstr "%s 도움말 출력을 읽을 수 없음" #~ msgid "failed to wait for command '%s'" #~ msgstr "명령어 '%s'를 기다리는 데 실패" #~ msgid "command did not exit cleanly" #~ msgstr "명령이 깔끔하게 종료되지 못했습니다" #~ msgid "non-zero exit status from command %d" #~ msgstr "0이 아닌 명령 종료 상태 %d" #~ msgid "Failed to run '%s' when looking for existing interface with IQN '%s'" #~ msgstr "" #~ "'%s' 실행이 IQN '%s'로 된 기존 인터페이스를 검색하는 도중에 실패했습니다" #, fuzzy #~ msgid "iscsiadm command failed" #~ msgstr "lvs 명령이 실패했습니다" #, fuzzy #~ msgid "iscsiadm sendtargets command failed with exitstatus %d" #~ msgstr "lvs 명령이 종료 상태 %d를 반환하며 실패했습니다" #~ msgid "lvs command failed" #~ msgstr "lvs 명령이 실패했습니다" #~ msgid "lvs command failed with exitstatus %d" #~ msgstr "lvs 명령이 종료 상태 %d를 반환하며 실패했습니다" #, fuzzy #~ msgid "Creating storage pool '%s'" #~ msgstr "풀 '%s'을 얻는 데 실패" #, fuzzy #~ msgid "Defining storage pool '%s'" #~ msgstr "풀 '%s'을 얻는 데 실패" #, fuzzy #~ msgid "Undefining storage pool '%s'" #~ msgstr "알려지지 않은 저장 풀(pool) 유형 %s" #, fuzzy #~ msgid "Starting up storage pool '%s'" #~ msgstr "풀 '%s'을 얻는 데 실패" #, fuzzy #~ msgid "Shutting down storage pool '%s'" #~ msgstr "'%s' 네트워크를 중지하는 중" #, fuzzy #~ msgid "Deleting storage pool '%s'" #~ msgstr "풀 '%s'을 얻는 데 실패" #, fuzzy #~ msgid "Creating volume '%s' in storage pool '%s'" #~ msgstr "VM '%s'의 autostart 실패: %s" #, fuzzy #~ msgid "Deleting volume '%s' from storage pool '%s'" #~ msgstr "풀 '%s'의 노드 볼륨 목록 " #~ msgid "node vol list for pool '%s'" #~ msgstr "풀 '%s'의 노드 볼륨 목록 " #~ msgid "loading host definition file '%s'" #~ msgstr "호스트 정의 파일 '%s'를 읽어오는 중" #~ msgid "Invalid XML in file '%s'" #~ msgstr "파일이 '%s'에 잘못된 XML이 있음" #~ msgid "node cpu numa nodes" #~ msgstr "노드 cpu numa 노드" #~ msgid "node cpu cores" #~ msgstr "노드 cpu 코어" #~ msgid "node active cpu" #~ msgstr "노드 활성화 cpu" #~ msgid "node cpu mhz" #~ msgstr "노드 cpu mhz" #~ msgid "node memory" #~ msgstr "노드 메모리" #~ msgid "node domain list" #~ msgstr "노드 도메인 목록" #~ msgid "node network list" #~ msgstr "노드 네트워크 목록" #~ msgid "node interface list" #~ msgstr "노드 인터페이스 목록" #~ msgid "node pool list" #~ msgstr "노드 풀 목록" #~ msgid "node device list" #~ msgstr "노드 장치 목록" #~ msgid "Not enabling IFF_VNET_HDR; TUNGETFEATURES ioctl() not implemented" #~ msgstr "" #~ "IFF_VNET_HDR를 활성화하지 않음; TUNGETFEATURES ioctl()가 구현되지 않았음" #~ msgid "" #~ "Not enabling IFF_VNET_HDR; TUNGETFEATURES ioctl() reports no IFF_VNET_HDR" #~ msgstr "" #~ "IFF_VNET_HDR를 활성화하지 않았음; TUNGETFEATURES ioctl()이 IFF_VNET_HDR가 " #~ "없다고 보고합니다" #~ msgid "Not enabling IFF_VNET_HDR; TUNGETIFF ioctl() not implemented" #~ msgstr "" #~ "IFF_VNET_HDR를 활성화하지 않았음; TUNGETIFF ioctl()이 구현되지 않았습니다" #~ msgid "Enabling IFF_VNET_HDR" #~ msgstr "IFF_VNET_HDR 활성화 중 " #~ msgid "Not enabling IFF_VNET_HDR; disabled at build time" #~ msgstr "IFF_VNET_HDR를 활성화하지 않았음; 컴파일시 비활성화 되었습니다" #, fuzzy #~ msgid "Intermediate daemon process status unexpected: %s" #~ msgstr "중간 데몬 프로세스가 상태 %d를 반환하며 종료했습니다." #, fuzzy #~ msgid "virRunWithHook is not implemented for WIN32" #~ msgstr "%s은 Win32상에서 구현되지 않음" #, fuzzy #~ msgid "virExecDaemonize is not implemented for WIN32" #~ msgstr "%s은 Win32상에서 구현되지 않음" #~ msgid "cannot set gid %u creating '%s'" #~ msgstr "gid를 %u로 설정할 수 없음('%s'생성 중)" #~ msgid "cannot set uid %u creating '%s'" #~ msgstr "uid를 %u로 설정할 수 없음('%s'생성 중)" #~ msgid "sysconf failed" #~ msgstr "sysconf가 실패했습니다" #~ msgid "XML description not well formed or invalid" #~ msgstr "XML 설명이 잘 작성되지 않았거나 유효하지 않음" #~ msgid "unknown device" #~ msgstr "알려지지 않은 장치" #~ msgid "Unable to verify current MemorySize" #~ msgstr "현재 메모리 크기를 확인할 수 없음" #~ msgid "cannot construct config file path" #~ msgstr "설정 파일 경로를 구성 할 수 없음" #~ msgid "Config filename '%s/%s' is too long" #~ msgstr "설정 파일이름 '%s/%s'가 너무 깁니다" #~ msgid "Autostart link path '%s/%s' is too long" #~ msgstr "Autostart 링크 경로 '%s/%s'가 너무 깁니다" #~ msgid "cannot construct autostart link path" #~ msgstr "autostart 링크 경로를 구성할 수 없음" #~ msgid "path too long" #~ msgstr "경로가 너무 긺" #~ msgid "cannot get current directory" #~ msgstr "현재 디렉터리를 얻을 수 없음" #, fuzzy #~ msgid "Unable to determine volume's key." #~ msgstr "호스트 이름을 결정하는 데 실패" #, fuzzy #~ msgid "disk profile name exceeds maximum length" #~ msgstr "보안 레이블이 최대 길이를 넘어감: %d" #~ msgid "Script %s too big for destination" #~ msgstr "스크립트 %s가 목적지로는 너무 큼" #~ msgid "Unable to shrink current MemorySize" #~ msgstr "현재 메모리 크기를 줄일 수 없음" #, fuzzy #~ msgid "Non-blocking I/O is not supported on %s" #~ msgstr "dom0에 대해 domainBlockPeek가 지원되지 않습니다" #~ msgid "Error submitting virtual machine to OpenNebula" #~ msgstr "OpenNebula에 가상 머신 제출 중 오류" #~ msgid "Already an OpenNebula VM active with the name: '%s' id: %d " #~ msgstr "이름: '%s' id: %d인 동작중인 OpenNebula가 이미 있음" #~ msgid "Wrong state to perform action" #~ msgstr "동작 수행 중 잘못된 상태" #~ msgid "failed to fork child to read '%s'" #~ msgstr "'%s' 읽기 위한 자식 fork에 실패" #~ msgid "failed in parent after forking child to read '%s'" #~ msgstr "'%s' 읽기 위한 자식을 fork한 후 부모에서 실패 발생" #~ msgid "failed in child after forking to read '%s'" #~ msgstr "'%s'를 읽기 위해 fork한 자식에서 실패 발생" #~ msgid "cannot open '%s' as uid %d" #~ msgstr "'%s'를 uid %d로 열 수 없음" #~ msgid "child failed reading from '%s'" #~ msgstr "자식이 '%s'에서 읽는 것을 실패했습니다" #~ msgid "failed to wait for process reading '%s'" #~ msgstr "'%s'를 읽는 프로세스를 wait하는 것에 실패" #~ msgid "child process returned error reading '%s'" #~ msgstr "자식 프로세스가 '%s'를 읽는 중 오류를 반환했습니다" #~ msgid "failed to close new file '%s'" #~ msgstr "새 파일 '%s' 닫기 실패" #~ msgid "child failed to close new file '%s'" #~ msgstr "자식이 새 파일 '%s'를 닫는 데 실패" #~ msgid "Policy kit denied action %s from pid %d, uid %d, result: %d" #~ msgstr "" #~ "Policy kit가 동작 %s를 pid %d, uid %d에 대해서 거부했습니다. 결과: %d" #~ msgid "Unexpected exit status from qemu %d pid %lu" #~ msgstr "qemu %d pid %lu 로부터 예기치 못한 exit 상태" #~ msgid "'%s' exited with non-zero status %d and signal %d: %s" #~ msgstr "'%s'가 0이 아닌 상태 %d와 시그널 %d와 함께 종료했습니다: %s" #~ msgid "Failed to set group ID to %d" #~ msgstr "그룹 ID를 %d로 설정하는 데 실패했습니다" #~ msgid "Failed to restore group ID to %d" #~ msgstr "%d로 그룹 ID를 복구하는 데 실패했습니다" #~ msgid "remoteCheckDN: failed: client DN is %s" #~ msgstr "remoteCheckDN: 실패했습니다: 클라이언트 DN은 %s 입니다." #~ msgid "failed to add domain to connection hash table" #~ msgstr "연결 해시 테이블에 도메인 추가 실패" #~ msgid "domain missing from connection hash table" #~ msgstr "연결 해시 테이블에서 도메인이 빠짐" #~ msgid "failed to add network to connection hash table" #~ msgstr "연결 해시 테이블에 네트워크 추가 실패" #~ msgid "network missing from connection hash table" #~ msgstr "연결 해시 테이블에서 네트워크 빠짐" #~ msgid "" #~ "Failed to change interface mac address from %s to %s due to differing " #~ "lengths." #~ msgstr "길이가 달라서, 인터페이스 mac 주소를 %s에서 %s로 바꾸는 것이 실패함" #~ msgid "interface missing from connection hash table" #~ msgstr "연결 해시 테이브에서 인터페이스가 빠짐" #~ msgid "failed to add storage pool to connection hash table" #~ msgstr "연결 해시 테이블에 저장 풀 추가 실패" #~ msgid "pool missing from connection hash table" #~ msgstr "연결 해시 테이블에서 풀이 빠짐" #~ msgid "failed to add storage vol to connection hash table" #~ msgstr "연결 해시 테이블에 저장 vol 추가 실패" #~ msgid "vol missing from connection hash table" #~ msgstr "연결 해시 테이블로에서 vol 빠짐" #~ msgid "failed to add node dev to conn hash table" #~ msgstr "연결 해시 테이블에 노드 장치 추가 실패" #~ msgid "dev missing from connection hash table" #~ msgstr "연결 해시 테이블에서 장치 빠짐" #~ msgid "failed to add secret to conn hash table" #~ msgstr "연결 해시 테이블에 비밀 추가 실패" #~ msgid "secret missing from connection hash table" #~ msgstr "연결 해시 테이블에서 비밀 빠짐" #, fuzzy #~ msgid "failed to add network filter pool to connection hash table" #~ msgstr "연결 해시 테이블에 네트워크 추가 실패" #, fuzzy #~ msgid "failed to add snapshot to domain hash table" #~ msgstr "연결 해시 테이블에 비밀 추가 실패" #, fuzzy #~ msgid "snapshot missing from domain hash table" #~ msgstr "연결 해시 테이블에서 풀이 빠짐" #, fuzzy #~ msgid "Could not retrieve host system" #~ msgstr "현재 시간을 얻을 수 없음" #, fuzzy #~ msgid "Could not retrieve compute resource of host system" #~ msgstr "파일시스템에 대해 소스 디렉터리를 설정할 수 없음" #~ msgid "waitpid failed to wait for container %d: %d" #~ msgstr "컨테이너 %d를 기다리기 위한 waitpid 실패: %d" #~ msgid "Failed to kill pid %d" #~ msgstr "pid %d 종료시키는 데 실패" #, fuzzy #~ msgid "Failed to create veth device pair '%s', '%s': %d" #~ msgstr "veth 장치 쌍 생성 실패: %d" #, fuzzy #~ msgid "Failed to move '%s' into NS(pid=%d) (%d)" #~ msgstr "인터페이스 %s를 ns %d로 옮기는 데 실패" #, fuzzy #~ msgid "cannot start dhcp daemon without IPv4 address for server" #~ msgstr "서버 IP 주소 없이 dhcp 데몬을 시작할 수 없음" #, fuzzy #~ msgid "cannot set netmask on bridge '%s'" #~ msgstr "'%s'에서 '%s'로의 브리지 상에 넷마스크 설정할 수 없음" #~ msgid "udev reports device '%s' does not have sysfs attr '%s'" #~ msgstr "udev가 장치 '%s'에는 sysfs 특성 '%s'가 없다고 보고합니다" #, fuzzy #~ msgid "Failed to find SCSI device type %d" #~ msgstr "PCI 장치 '%s'를 %s에 바인드하는 데 실패" #~ msgid "virAsprintf failed" #~ msgstr "virAsprintf 실패" #~ msgid "Unable to read 'qemu -M ?' output" #~ msgstr "'qemu -M ?' 출력을 읽을 수 없음" #~ msgid "Unable to read QEMU supported CPU models" #~ msgstr "QEMU 지원 CPU 모델을 읽을 수 없음" #, fuzzy #~ msgid "Unable to read %s pci-assign device output" #~ msgstr "%s 도움말 출력을 읽을 수 없음" #~ msgid "Unable to read %s help output" #~ msgstr "%s 도움말 출력을 읽을 수 없음" #~ msgid "cannot setuid(%d) to read '%s'" #~ msgstr "setuid(%d)를 '%s'를 읽기 위해 할 수 없음" #~ msgid "" #~ "network device type '%s' cannot be attached: qemu is not using a unix " #~ "socket monitor" #~ msgstr "" #~ "네트워크 장치 유형 '%s'는 부착할 수 없습니다: qemu는 unix 소켓 모니터를 사" #~ "용하지 않습니다" #~ msgid "Destination qemu is too old to support tunnelled migration" #~ msgstr "" #~ "목적지 qemu가 너무 오래되서 터널링을 사용한 이전을 지원하지 않습니다" #, fuzzy #~ msgid "Failed to run '%s' to create snapshot '%s' from disk '%s'" #~ msgstr "심볼릭 링크 '%s'를 '%s'에 대해 만들 수 없음" #~ msgid "%s: DOI '%s' is longer than the maximum allowed length of %d" #~ msgstr "%s: DOI '%s'가 최대 허용 길이 %d 보다 더 깁니다" #~ msgid "Failed to run command '%s' with action '%s'" #~ msgstr "명령어 '%s'를 동작 '%s'와 함께 실행하는 데 실패했습니다" #~ msgid "cannot remove PV device '%s'" #~ msgstr "'%s' PV 장치를 제거할 수 없음" #, fuzzy #~ msgid "unable to create pipe for hook input" #~ msgstr "파이프를 생성할 수 없" #, fuzzy #~ msgid "unable to write to pipe for hook input" #~ msgstr "파이프에 수 없음" #, fuzzy #~ msgid "unable to close pipe for hook input" #~ msgstr "파이프를 생성할 수 없" #, fuzzy #~ msgid "Failed to execute %s hook script" #~ msgstr "%s를 %s로 설정하는 데 실패" #, fuzzy #~ msgid "Failed to wait for '%s'" #~ msgstr "명령어 '%s'를 기다리는 데 실패" #, fuzzy #~ msgid "Failed to fork libvirt_proxy" #~ msgstr "libvirtd 바이너리를 찾는 데 실패" #~ msgid "failed to write proxy request" #~ msgstr "프락시 요청을 쓰는 데 실패" #, fuzzy #~ msgid "Communication error with proxy: got %d bytes of %d" #~ msgstr "proxy와의 통신 오류: %d 바이트를 전체 %d 바이트에서 받음\n" #, fuzzy #~ msgid "Communication error with proxy: expected %d bytes got %d" #~ msgstr "proxy와의 통신 오류: 예상 %d 바이트 받음 %d 바이트\n" #, fuzzy #~ msgid "Communication error with proxy: got %d bytes packet" #~ msgstr "proxy와의 통신 오류: %d 바이트 패킷을 받음\n" #, fuzzy #~ msgid "Communication error with proxy: malformed packet" #~ msgstr "proxy와의 통신 오류: 잘못된 형식의 패킷\n" #~ msgid "Cannot get domain details" #~ msgstr "도메인 상세정보를 얻을 수 없음" #~ msgid "unable to open tty %s: %s" #~ msgstr "tty %s를 여는 데 실패: %s" #~ msgid "failure waiting for I/O: %s" #~ msgstr "I/O를 기다리는 중 실패: %s" #~ msgid "failure reading input: %s" #~ msgstr "입력을 읽는 중 실패: %s" #~ msgid "failure writing output: %s" #~ msgstr "출력에 쓰는 중 실패: %s" #~ msgid "Failed to get connection hostname" #~ msgstr "연결 호스트 이름을 얻는 데 실패" #~ msgid "Cannot connect to a remote console device" #~ msgstr "원격 콘솔 장치에 연결할 수 없습니다" #~ msgid "network name, id or uuid" #~ msgstr "네트워크 이름, id 또는 uuid" #~ msgid "virAsprintf: could not create editing command: %s" #~ msgstr "virAsprintf: 편집 명령을 생성할 수 없음: %s" #~ msgid "failed to disconnect from the hypervisor" #~ msgstr "하이퍼바이저에서 연결 끊기 실패"