Domain XML format

Lifecycle control

It is sometimes necessary to override the default actions taken when a guest OS triggers a lifecycle operation. The following collections of elements allow the actions to be specified. A common use case is to force a reboot to be treated as a poweroff when doing the initial OS installation. This allows the VM to be re-configured for the first post-install bootup.

        ...
	<on_poweroff>destroy</on_poweroff>
	<on_reboot>restart</on_reboot>
	<on_crash>restart</on_crash>
	...

on_poweroff

The content of this element specifies the action to take when the guest requests a poweroff.

on_reboot

The content of this element specifies the action to take when the guest requests a reboot.

on_crash

The content of this element specifies the action to take when the guest crashes.

Each of these states allow for the same four possible actions.

destroy

The domain will be terminated completely and all resources released

restart

The domain will be terminated, and then restarted with the same configuration

preserve

The domain will be terminated, and its resource preserved to allow analysis.

rename-restart

The domain will be terminated, and then restarted with a new name

Hypervisor features

Hypervisors may allow certain CPU / machine features to be toggled on/off.

        ...
	<features>
	  <pae/>
	  <acpi/>
	  <apic/>
	</features>
	...

All features are listed within the features element, omitting a togglable feature tag turns it off. The available features can be found by asking for the capabilities XML, but a common set for fully virtualized domains are:

pae

Physical address extension mode allows 32-bit guests to address more than 4 GB of memory.

acpi

ACPI is useful for power management, for example, with KVM guests it is required for graceful shutdown to work.

Time keeping

The guest clock is typically initialized from the host clock. Most operating systems expect the hardware clock to be kept in UTC, and this is the default. Windows, however, expects it to be in so called 'localtime'.

        ...
        <clock offset="localtime"/>
	...

clock

The sync attribute takes either "utc" or "localtime" to specify how the guest clock is initialized in relation to the host OS.

Devices

The final set of XML elements are all used to describe devices provided to the guest domain. All devices occur as children of the main devices element. Since 0.1.3

        ...
        <devices>
	  <emulator>/usr/lib/xen/bin/qemu-dm</emulator>
          ...

emulator

The contents of the emulator element specify the fully qualified path to the device model emulator binary. The capabilities XML specifies the recommended default emulator to use for each particular domain type / architecture combination.

Hard drives, floppy disks, CDROMs

Any device that looks like a disk, be it a floppy, harddisk, cdrom, or paravirtualized driver is specified via the disk element.

          ...
	  <disk type='file'>
	    <driver name="tap" type="aio">
	    <source file='/var/lib/xen/images/fv0'/>
	    <target dev='hda' bus='ide'/>
	  </disk>
	  ...

disk

The disk element is the main container for describing disks. The type attribute is either "file" or "block" and refers to the underlying source for the disk. The optional device attribute indicates how the disk is to be exposed to the guest OS. Possible values for this attribute are "floppy", "disk" and "cdrom", defaulting to "disk". Since 0.0.3; "device" attribute since 0.1.4

source

If the disk type is "file", then the file attribute specifies the fully-qualified path to the file holding the disk. If the disk type is "block", then the dev attribute specifies the path to the host device to serve as the disk. Since 0.0.3

target

The target element controls the bus / device under which the disk is exposed to the guest OS. The dev attribute indicates the "logical" device name. The actual device name specified is not guaranteed to map to the device name in the guest OS. Treat it as a device ordering hint. The optional bus attribute specifies the type of disk device to emulate; possible values are driver specific, with typical values being "ide", "scsi", "virtio", "xen" or "usb". If omitted, the bus type is inferred from the style of the device name. eg, a device named 'sda' will typically be exported using a SCSI bus. Since 0.0.3; bus attribute since 0.4.3; "usb" attribute value since after 0.4.4

driver

If the hypervisor supports multiple backend drivers, then the optional driver element allows them to be selected. The name attribute is the primary backend driver name, while the optional type attribute provides the sub-type. Since 0.1.8

USB and PCI devices

USB and PCI devices attached to the host can be passed through to the guest using the hostdev element. since after 0.4.4 for USB and 0.6.0 for PCI (KVM only):

          ...
	  <hostdev mode='subsystem' type='usb'>
	    <source>
	      <vendor id='0x1234'/>
	      <product id='0xbeef'/>
	    </source>
	  </hostdev>
	  ...

or:

          ...
	  <hostdev mode='subsystem' type='pci'>
	    <source>
	      <address bus='0x06' slot='0x02' function='0x0'/>
	    </source>
	  </hostdev>
	  ...

hostdev

The hostdev element is the main container for describing host devices. For usb device passthrough mode is always "subsystem" and type is "usb" for an USB device and "pci" for a PCI device..

source

The source element describes the device as seen from the host. The USB device can either be addressed by vendor / product id using the vendor and product elements or by the device's address on the hosts using the address element. PCI devices on the other hand can only be described by their address

vendor, product

The vendor and product elements each have an id attribute that specifies the USB vendor and product id. The ids can be given in decimal, hexadecimal (starting with 0x) or octal (starting with 0) form.

address

The address element for USB devices has a bus and device attribute to specify the USB bus and device number the device appears at on the host. The values of these attributes can be given in decimal, hexadecimal (starting with 0x) or octal (starting with 0) form. For PCI devices the element carries 3 attributes allowing to designate the device as can be found with the lspci or with virsh nodedev-list. The bus attribute allows the hexadecimal values 0 to ff, the slot attribute allows the hexadecimal values 0 to 1f, and the function attribute allows the hexadecimal values 0 to 7. There is also an optional domain attribute for the PCI domain, with hexadecimal values 0 to ffff, but it is currently not used by qemu.

Network interfaces

          ...
	  <interface type='bridge'>
	    <source bridge='xenbr0'/>
	    <mac address='00:16:3e:5d:c7:9e'/>
	    <script path='vif-bridge'/>
	  </interface>
	  ...

Virtual network

This is the recommended config for general guest connectivity on hosts with dynamic / wireless networking configs

Provides a virtual network using a bridge device in the host. Depending on the virtual network configuration, the network may be totally isolated, NAT'ing to an explicit network device, or NAT'ing to the default route. DHCP and DNS are provided on the virtual network in all cases and the IP range can be determined by examining the virtual network config with 'virsh net-dumpxml [networkname]'. There is one virtual network called 'default' setup out of the box which does NAT'ing to the default route and has an IP range of 192.168.22.0/255.255.255.0. Each guest will have an associated tun device created with a name of vnetN, which can also be overridden with the <target> element.

      ...
      <interface type='network'>
        <source network='default'/>
      </interface>
      ...
      <interface type='network'>
        <source network='default'/>
        <target dev='vnet7'/>
        <mac address="11:22:33:44:55:66"/>
      </interface>
      ...

Bridge to to LAN

This is the recommended config for general guest connectivity on hosts with static wired networking configs

Provides a bridge from the VM directly onto the LAN. This assumes there is a bridge device on the host which has one or more of the hosts physical NICs enslaved. The guest VM will have an associated tun device created with a name of vnetN, which can also be overridden with the <target> element. The tun device will be enslaved to the bridge. The IP range / network configuration is whatever is used on the LAN. This provides the guest VM full incoming & outgoing net access just like a physical machine.

      ...
      <interface type='bridge'>
        <source bridge='br0'/>
      </interface>

      <interface type='bridge'>
        <source bridge='br0'/>
        <target dev='vnet7'/>
        <mac address="11:22:33:44:55:66"/>
      </interface>
      ...

Userspace SLIRP stack

Provides a virtual LAN with NAT to the outside world. The virtual network has DHCP & DNS services and will give the guest VM addresses starting from 10.0.2.15. The default router will be 10.0.2.2 and the DNS server will be 10.0.2.3. This networking is the only option for unprivileged users who need their VMs to have outgoing access.

      ...
      <interface type='user'/>
      ...
      <interface type='user'>
        <mac address="11:22:33:44:55:66"/>
      </interface>
      ...

Generic ethernet connection

Provides a means for the administrator to execute an arbitrary script to connect the guest's network to the LAN. The guest will have a tun device created with a name of vnetN, which can also be overridden with the <target> element. After creating the tun device a shell script will be run which is expected to do whatever host network integration is required. By default this script is called /etc/qemu-ifup but can be overridden.

      ...
      <interface type='ethernet'/>
      ...
      <interface type='ethernet'>
        <target dev='vnet7'/>
        <script path='/etc/qemu-ifup-mynet'/>
      </interface>
      ...

Multicast tunnel

A multicast group is setup to represent a virtual network. Any VMs whose network devices are in the same multicast group can talk to each other even across hosts. This mode is also available to unprivileged users. There is no default DNS or DHCP support and no outgoing network access. To provide outgoing network access, one of the VMs should have a 2nd NIC which is connected to one of the first 4 network types and do the appropriate routing. The multicast protocol is compatible with that used by user mode linux guests too. The source address used must be from the multicast address block.

      ...
      <interface type='mcast'>
        <source address='230.0.0.1' port='5558'/>
      </interface>
      ...

TCP tunnel

A TCP client/server architecture provides a virtual network. One VM provides the server end of the network, all other VMS are configured as clients. All network traffic is routed between the VMs via the server. This mode is also available to unprivileged users. There is no default DNS or DHCP support and no outgoing network access. To provide outgoing network access, one of the VMs should have a 2nd NIC which is connected to one of the first 4 network types and do the appropriate routing.

      ...
      <interface type='server'>
        <source address='192.168.0.1' port='5558'/>
      </interface>
      ...
      <interface type='client'>
      <source address='192.168.0.1' port='5558'/>
      </interface>
      ...

Setting the NIC model

      ...
      <interface type='network'>
        <source network='default'/>
        <target dev='vnet1'/>
        <model type='ne2k_pci'/>
      </interface>
      ...

For hypervisors which support this, you can set the model of emulated network interface card.

The values for type aren't defined specifically by libvirt, but by what the underlying hypervisor supports (if any). For QEMU and KVM you can get a list of supported models with these commands:

qemu -net nic,model=? /dev/null
qemu-kvm -net nic,model=? /dev/null

Typical values for QEMU and KVM include: ne2k_isa i82551 i82557b i82559er ne2k_pci pcnet rtl8139 e1000 virtio

Input devices

Input devices allow interaction with the graphical framebuffer in the guest virtual machine. When enabling the framebuffer, an input device is automatically provided. It may be possible to add additional devices explicitly, for example, to provide a graphics tablet for absolute cursor movement.

          ...
	  <input type='mouse' bus='usb'/>
	  ...

input

The input element has one mandatory attribute, the type whose value can be either 'mouse' or 'tablet'. The latter provides absolute cursor movement, while the former uses relative movement. The optional bus attribute can be used to refine the exact device type. It takes values "xen" (paravirtualized), "ps2" and "usb".

Graphical framebuffers

A graphics device allows for graphical interaction with the guest OS. A guest will typically have either a framebuffer or a text console configured to allow interaction with the admin.

          ...
	  <graphics type='vnc' port='5904'/>
	  ...

graphics

The graphics element has a mandatory type attribute which takes the value "sdl" or "vnc". The former displays a window on the host desktop, while the latter activates a VNC server. The former accepts 3 optional arguments: a display attribute for the display to use, an xauth attribute for the authentication identifier, and an optional fullscreen attribute accepting values 'yes' or 'no'. If the latter is used the port attribute specifies the TCP port number (with -1 as legacy syntax indicating that it should be auto-allocated). The autoport attribute is the new preferred syntax for indicating autoallocation of the TCP port to use. The listen attribute is an IP address for the server to listen on. The passwd attribute provides a VNC password in clear text. The keymap attribute specifies the keymap to use.

Consoles, serial & parallel devices

A character device provides a way to interact with the virtual machine. Paravirtualized consoles, serial ports and parallel ports are all classed as character devices and so represented using the same syntax.

        ...
        <parallel type='pty'>
	  <source path='/dev/pts/2'/>
	  <target port='0'/>
        </parallel>
        <serial type='pty'>
	  <source path='/dev/pts/3'/>
	  <target port='0'/>
        </serial>
        <console type='pty'>
	  <source path='/dev/pts/4'/>
	  <target port='0'/>
        </console>
        </devices>
      </domain>

parallel

Represents a parallel port

serial

Represents a serial port

console

Represents the primary console. This can be the paravirtualized console with Xen guests, or duplicates the primary serial port for fully virtualized guests without a paravirtualized console.

source

The attributes available for the source element vary according to the type attribute on the parent tag. Allowed variations will be described below

target

The port number of the character device is specified via the port attribute, numbered starting from 1. There is usually only one console device, and 0, 1 or 2 serial devices or parallel devices.

Domain logfile

This disables all input on the character device, and sends output into the virtual machine's logfile

      ...
      <console type='stdio'>
        <target port='1'>
      </console>
      ...

Device logfile

A file is opened and all data sent to the character device is written to the file.

      ...
      <serial type="file">
        <source path="/var/log/vm/vm-serial.log"/>
        <target port="1"/>
      </serial>
      ...

Virtual console

Connects the character device to the graphical framebuffer in a virtual console. This is typically accessed via a special hotkey sequence such as "ctrl+alt+3"

      ...
      <serial type='vc'>
        <target port="1"/>
      </serial>
      ...

Null device

Connects the character device to the void. No data is ever provided to the input. All data written is discarded.

      ...
      <serial type='null'>
        <target port="1"/>
      </serial>
      ...

Pseudo TTY

A Pseudo TTY is allocated using /dev/ptmx. A suitable client such as 'virsh console' can connect to interact with the serial port locally.

      ...
      <serial type="pty">
        <source path="/dev/pts/3"/>
        <target port="1"/>
      </serial>
      ...

NB special case if <console type='pty'>, then the TTY path is also duplicated as an attribute tty='/dev/pts/3' on the top level <console> tag. This provides compat with existing syntax for <console> tags.

Host device proxy

The character device is passed through to the underlying physical character device. The device types must match, eg the emulated serial port should only be connected to a host serial port - don't connect a serial port to a parallel port.

      ...
      <serial type="dev">
        <source path="/dev/ttyS0"/>
        <target port="1"/>
      </serial>
      ...

Named pipe

The character device writes output to a named pipe. See pipe(7) for more info.

      ...
      <serial type="pipe">
        <source path="/tmp/mypipe"/>
        <target port="1"/>
      </serial>
      ...

TCP client/server

The character device acts as a TCP client connecting to a remote server.

      ...
      <serial type="tcp">
        <source mode="connect" host="0.0.0.0" service="2445"/>
        <protocol type="raw"/>
        <target port="1"/>
      </serial>
      ...

Or as a TCP server waiting for a client connection.

      ...
      <serial type="tcp">
        <source mode="bind" host="127.0.0.1" service="2445"/>
        <protocol type="raw"/>
        <target port="1"/>
      </serial>
      ...

Alternatively you can use telnet instead of raw TCP.

      ...
      <serial type="tcp">
        <source mode="connect" host="0.0.0.0" service="2445"/>
        <protocol type="telnet"/>
        <target port="1"/>
      </serial>
      ...
      <serial type="tcp">
        <source mode="bind" host="127.0.0.1" service="2445"/>
        <protocol type="telnet"/>
        <target port="1"/>
      </serial>
      ...

UDP network console

The character device acts as a UDP netconsole service, sending and receiving packets. This is a lossy service.

      ...
      <serial type="udp">
        <source mode="bind" host="0.0.0.0" service="2445"/>
        <source mode="connect" host="0.0.0.0" service="2445"/>
        <target port="1"/>
      </serial>
      ...

UNIX domain socket client/server

The character device acts as a UNIX domain socket server, accepting connections from local clients.

      ...
      <serial type="unix">
        <source mode="bind" path="/tmp/foo"/>
        <target port="1"/>
      </serial>
      ...

Sound devices

A virtual sound card can be attached to the host via the sound element. Since 0.4.3

      ...
      <sound model='es1370'/>
      ...

sound

The sound element has one mandatory attribute, model, which specifies what real sound device is emulated. Valid values are specific to the underlying hypervisor, though typical choices are 'es1370', 'sb16', and 'ac97' ('ac97' only since 0.6.0)

Example configs

Example configurations for each driver are provide on the driver specific pages listed below

• Xen examples
• QEMU/KVM examples