/* * Copyright (C) 2009-2011 Red Hat, Inc. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Authors: * Mark McLoughlin */ #include #include "pci.h" #include #include #include #include #include #include #include #include #include #include #include "logging.h" #include "memory.h" #include "command.h" #include "virterror_internal.h" #include "virfile.h" /* avoid compilation breakage on some systems */ #ifndef MODPROBE # define MODPROBE "modprobe" #endif #define PCI_SYSFS "/sys/bus/pci/" #define PCI_ID_LEN 10 /* "XXXX XXXX" */ #define PCI_ADDR_LEN 13 /* "XXXX:XX:XX.X" */ #define SRIOV_FOUND 0 #define SRIOV_NOT_FOUND 1 #define SRIOV_ERROR -1 struct _pciDevice { unsigned domain; unsigned bus; unsigned slot; unsigned function; char name[PCI_ADDR_LEN]; /* domain:bus:slot.function */ char id[PCI_ID_LEN]; /* product vendor */ char *path; int fd; unsigned initted; unsigned pcie_cap_pos; unsigned pci_pm_cap_pos; unsigned has_flr : 1; unsigned has_pm_reset : 1; unsigned managed : 1; /* used by reattach function */ unsigned unbind_from_stub : 1; unsigned remove_slot : 1; unsigned reprobe : 1; }; struct _pciDeviceList { unsigned count; pciDevice **devs; }; /* For virReportOOMError() and virReportSystemError() */ #define VIR_FROM_THIS VIR_FROM_NONE #define pciReportError(code, ...) \ virReportErrorHelper(VIR_FROM_NONE, code, __FILE__, \ __FUNCTION__, __LINE__, __VA_ARGS__) /* Specifications referenced in comments: * PCI30 - PCI Local Bus Specification 3.0 * PCIe20 - PCI Express Base Specification 2.0 * BR12 - PCI-to-PCI Bridge Architecture Specification 1.2 * PM12 - PCI Bus Power Management Interface Specification 1.2 * ECN_AF - Advanced Capabilities for Conventional PCI ECN */ /* Type 0 config space header length; PCI30 Section 6.1 Configuration Space Organization */ #define PCI_CONF_LEN 0x100 #define PCI_CONF_HEADER_LEN 0x40 /* PCI30 6.2.1 */ #define PCI_HEADER_TYPE 0x0e /* Header type */ #define PCI_HEADER_TYPE_BRIDGE 0x1 #define PCI_HEADER_TYPE_MASK 0x7f #define PCI_HEADER_TYPE_MULTI 0x80 /* PCI30 6.2.1 Device Identification */ #define PCI_CLASS_DEVICE 0x0a /* Device class */ /* Class Code for bridge; PCI30 D.7 Base Class 06h */ #define PCI_CLASS_BRIDGE_PCI 0x0604 /* PCI30 6.2.3 Device Status */ #define PCI_STATUS 0x06 /* 16 bits */ #define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ /* PCI30 6.7 Capabilities List */ #define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ /* PM12 3.2.1 Capability Identifier */ #define PCI_CAP_ID_PM 0x01 /* Power Management */ /* PCI30 H Capability IDs */ #define PCI_CAP_ID_EXP 0x10 /* PCI Express */ /* ECN_AF 6.x.1.1 Capability ID for AF */ #define PCI_CAP_ID_AF 0x13 /* Advanced Features */ /* PCIe20 7.8.3 Device Capabilities Register (Offset 04h) */ #define PCI_EXP_DEVCAP 0x4 /* Device capabilities */ #define PCI_EXP_DEVCAP_FLR (1<<28) /* Function Level Reset */ /* Header type 1 BR12 3.2 PCI-to-PCI Bridge Configuration Space Header Format */ #define PCI_PRIMARY_BUS 0x18 /* BR12 3.2.5.2 Primary bus number */ #define PCI_SECONDARY_BUS 0x19 /* BR12 3.2.5.3 Secondary bus number */ #define PCI_SUBORDINATE_BUS 0x1a /* BR12 3.2.5.4 Highest bus number behind the bridge */ #define PCI_BRIDGE_CONTROL 0x3e /* BR12 3.2.5.18 Bridge Control Register */ #define PCI_BRIDGE_CTL_RESET 0x40 /* Secondary bus reset */ /* PM12 3.2.4 Power Management Control/Status (Offset = 4) */ #define PCI_PM_CTRL 4 /* PM control and status register */ #define PCI_PM_CTRL_STATE_MASK 0x3 /* Current power state (D0 to D3) */ #define PCI_PM_CTRL_STATE_D0 0x0 /* D0 state */ #define PCI_PM_CTRL_STATE_D3hot 0x3 /* D3 state */ #define PCI_PM_CTRL_NO_SOFT_RESET 0x8 /* No reset for D3hot->D0 */ /* ECN_AF 6.x.1 Advanced Features Capability Structure */ #define PCI_AF_CAP 0x3 /* Advanced features capabilities */ #define PCI_AF_CAP_FLR 0x2 /* Function Level Reset */ #define PCI_EXP_FLAGS 0x2 #define PCI_EXP_FLAGS_TYPE 0x00f0 #define PCI_EXP_TYPE_DOWNSTREAM 0x6 #define PCI_EXT_CAP_BASE 0x100 #define PCI_EXT_CAP_LIMIT 0x1000 #define PCI_EXT_CAP_ID_MASK 0x0000ffff #define PCI_EXT_CAP_OFFSET_SHIFT 20 #define PCI_EXT_CAP_OFFSET_MASK 0x00000ffc #define PCI_EXT_CAP_ID_ACS 0x000d #define PCI_EXT_ACS_CTRL 0x06 #define PCI_EXT_CAP_ACS_SV 0x01 #define PCI_EXT_CAP_ACS_RR 0x04 #define PCI_EXT_CAP_ACS_CR 0x08 #define PCI_EXT_CAP_ACS_UF 0x10 #define PCI_EXT_CAP_ACS_ENABLED (PCI_EXT_CAP_ACS_SV | \ PCI_EXT_CAP_ACS_RR | \ PCI_EXT_CAP_ACS_CR | \ PCI_EXT_CAP_ACS_UF) static int pciOpenConfig(pciDevice *dev) { int fd; if (dev->fd > 0) return 0; fd = open(dev->path, O_RDWR); if (fd < 0) { char ebuf[1024]; VIR_WARN("Failed to open config space file '%s': %s", dev->path, virStrerror(errno, ebuf, sizeof(ebuf))); return -1; } VIR_DEBUG("%s %s: opened %s", dev->id, dev->name, dev->path); dev->fd = fd; return 0; } static void pciCloseConfig(pciDevice *dev) { if (!dev) return; VIR_FORCE_CLOSE(dev->fd); } static int pciRead(pciDevice *dev, unsigned pos, uint8_t *buf, unsigned buflen) { memset(buf, 0, buflen); if (pciOpenConfig(dev) < 0) return -1; if (lseek(dev->fd, pos, SEEK_SET) != pos || saferead(dev->fd, buf, buflen) != buflen) { char ebuf[1024]; VIR_WARN("Failed to read from '%s' : %s", dev->path, virStrerror(errno, ebuf, sizeof(ebuf))); return -1; } return 0; } static uint8_t pciRead8(pciDevice *dev, unsigned pos) { uint8_t buf; pciRead(dev, pos, &buf, sizeof(buf)); return buf; } static uint16_t pciRead16(pciDevice *dev, unsigned pos) { uint8_t buf[2]; pciRead(dev, pos, &buf[0], sizeof(buf)); return (buf[0] << 0) | (buf[1] << 8); } static uint32_t pciRead32(pciDevice *dev, unsigned pos) { uint8_t buf[4]; pciRead(dev, pos, &buf[0], sizeof(buf)); return (buf[0] << 0) | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24); } static int pciWrite(pciDevice *dev, unsigned pos, uint8_t *buf, unsigned buflen) { if (pciOpenConfig(dev) < 0) return -1; if (lseek(dev->fd, pos, SEEK_SET) != pos || safewrite(dev->fd, buf, buflen) != buflen) { char ebuf[1024]; VIR_WARN("Failed to write to '%s' : %s", dev->path, virStrerror(errno, ebuf, sizeof(ebuf))); return -1; } return 0; } static void pciWrite16(pciDevice *dev, unsigned pos, uint16_t val) { uint8_t buf[2] = { (val >> 0), (val >> 8) }; pciWrite(dev, pos, &buf[0], sizeof(buf)); } static void pciWrite32(pciDevice *dev, unsigned pos, uint32_t val) { uint8_t buf[4] = { (val >> 0), (val >> 8), (val >> 16), (val >> 14) }; pciWrite(dev, pos, &buf[0], sizeof(buf)); } typedef int (*pciIterPredicate)(pciDevice *, pciDevice *, void *); /* Iterate over available PCI devices calling @predicate * to compare each one to @dev. * Return -1 on error since we don't want to assume it is * safe to reset if there is an error. */ static int pciIterDevices(pciIterPredicate predicate, pciDevice *dev, pciDevice **matched, void *data) { DIR *dir; struct dirent *entry; int ret = 0; int rc; *matched = NULL; VIR_DEBUG("%s %s: iterating over " PCI_SYSFS "devices", dev->id, dev->name); dir = opendir(PCI_SYSFS "devices"); if (!dir) { VIR_WARN("Failed to open " PCI_SYSFS "devices"); return -1; } while ((entry = readdir(dir))) { unsigned int domain, bus, slot, function; pciDevice *check; char *tmp; /* Ignore '.' and '..' */ if (entry->d_name[0] == '.') continue; /* expected format: ::. */ if (/* domain */ virStrToLong_ui(entry->d_name, &tmp, 16, &domain) < 0 || *tmp != ':' || /* bus */ virStrToLong_ui(tmp + 1, &tmp, 16, &bus) < 0 || *tmp != ':' || /* slot */ virStrToLong_ui(tmp + 1, &tmp, 16, &slot) < 0 || *tmp != '.' || /* function */ virStrToLong_ui(tmp + 1, NULL, 16, &function) < 0) { VIR_WARN("Unusual entry in " PCI_SYSFS "devices: %s", entry->d_name); continue; } check = pciGetDevice(domain, bus, slot, function); if (!check) { ret = -1; break; } rc = predicate(dev, check, data); if (rc < 0) { /* the predicate returned an error, bail */ pciFreeDevice(check); ret = -1; break; } else if (rc == 1) { VIR_DEBUG("%s %s: iter matched on %s", dev->id, dev->name, check->name); *matched = check; ret = 1; break; } pciFreeDevice(check); } closedir(dir); return ret; } static uint8_t pciFindCapabilityOffset(pciDevice *dev, unsigned capability) { uint16_t status; uint8_t pos; status = pciRead16(dev, PCI_STATUS); if (!(status & PCI_STATUS_CAP_LIST)) return 0; pos = pciRead8(dev, PCI_CAPABILITY_LIST); /* Zero indicates last capability, capabilities can't * be in the config space header and 0xff is returned * by the kernel if we don't have access to this region * * Note: we're not handling loops or extended * capabilities here. */ while (pos >= PCI_CONF_HEADER_LEN && pos != 0xff) { uint8_t capid = pciRead8(dev, pos); if (capid == capability) { VIR_DEBUG("%s %s: found cap 0x%.2x at 0x%.2x", dev->id, dev->name, capability, pos); return pos; } pos = pciRead8(dev, pos + 1); } VIR_DEBUG("%s %s: failed to find cap 0x%.2x", dev->id, dev->name, capability); return 0; } static unsigned int pciFindExtendedCapabilityOffset(pciDevice *dev, unsigned capability) { int ttl; unsigned int pos; uint32_t header; /* minimum 8 bytes per capability */ ttl = (PCI_EXT_CAP_LIMIT - PCI_EXT_CAP_BASE) / 8; pos = PCI_EXT_CAP_BASE; while (ttl > 0 && pos >= PCI_EXT_CAP_BASE) { header = pciRead32(dev, pos); if ((header & PCI_EXT_CAP_ID_MASK) == capability) return pos; pos = (header >> PCI_EXT_CAP_OFFSET_SHIFT) & PCI_EXT_CAP_OFFSET_MASK; ttl--; } return 0; } /* detects whether this device has FLR. Returns 0 if the device does * not have FLR, 1 if it does, and -1 on error */ static int pciDetectFunctionLevelReset(pciDevice *dev) { uint32_t caps; uint8_t pos; char *path; int found; /* The PCIe Function Level Reset capability allows * individual device functions to be reset without * affecting any other functions on the device or * any other devices on the bus. This is only common * on SR-IOV NICs at the moment. */ if (dev->pcie_cap_pos) { caps = pciRead32(dev, dev->pcie_cap_pos + PCI_EXP_DEVCAP); if (caps & PCI_EXP_DEVCAP_FLR) { VIR_DEBUG("%s %s: detected PCIe FLR capability", dev->id, dev->name); return 1; } } /* The PCI AF Function Level Reset capability is * the same thing, except for conventional PCI * devices. This is not common yet. */ pos = pciFindCapabilityOffset(dev, PCI_CAP_ID_AF); if (pos) { caps = pciRead16(dev, pos + PCI_AF_CAP); if (caps & PCI_AF_CAP_FLR) { VIR_DEBUG("%s %s: detected PCI FLR capability", dev->id, dev->name); return 1; } } /* there are some buggy devices that do support FLR, but forget to * advertise that fact in their capabilities. However, FLR is *required* * to be present for virtual functions (VFs), so if we see that this * device is a VF, we just assume FLR works */ if (virAsprintf(&path, PCI_SYSFS "devices/%s/physfn", dev->name) < 0) { virReportOOMError(); return -1; } found = virFileExists(path); VIR_FREE(path); if (found) { VIR_DEBUG("%s %s: buggy device didn't advertise FLR, but is a VF; forcing flr on", dev->id, dev->name); return 1; } VIR_DEBUG("%s %s: no FLR capability found", dev->id, dev->name); return 0; } /* Require the device has the PCI Power Management capability * and that a D3hot->D0 transition will results in a full * internal reset, not just a soft reset. */ static unsigned pciDetectPowerManagementReset(pciDevice *dev) { if (dev->pci_pm_cap_pos) { uint32_t ctl; /* require the NO_SOFT_RESET bit is clear */ ctl = pciRead32(dev, dev->pci_pm_cap_pos + PCI_PM_CTRL); if (!(ctl & PCI_PM_CTRL_NO_SOFT_RESET)) { VIR_DEBUG("%s %s: detected PM reset capability", dev->id, dev->name); return 1; } } VIR_DEBUG("%s %s: no PM reset capability found", dev->id, dev->name); return 0; } /* Any active devices on the same domain/bus ? */ static int pciSharesBusWithActive(pciDevice *dev, pciDevice *check, void *data) { pciDeviceList *inactiveDevs = data; /* Different domain, different bus, or simply identical device */ if (dev->domain != check->domain || dev->bus != check->bus || (dev->slot == check->slot && dev->function == check->function)) return 0; /* same bus, but inactive, i.e. about to be assigned to guest */ if (inactiveDevs && pciDeviceListFind(inactiveDevs, check)) return 0; return 1; } static pciDevice * pciBusContainsActiveDevices(pciDevice *dev, pciDeviceList *inactiveDevs) { pciDevice *active = NULL; if (pciIterDevices(pciSharesBusWithActive, dev, &active, inactiveDevs) < 0) return NULL; return active; } /* Is @check the parent of @dev ? */ static int pciIsParent(pciDevice *dev, pciDevice *check, void *data) { uint16_t device_class; uint8_t header_type, secondary, subordinate; pciDevice **best = data; if (dev->domain != check->domain) return 0; /* Is it a bridge? */ device_class = pciRead16(check, PCI_CLASS_DEVICE); if (device_class != PCI_CLASS_BRIDGE_PCI) return 0; /* Is it a plane? */ header_type = pciRead8(check, PCI_HEADER_TYPE); if ((header_type & PCI_HEADER_TYPE_MASK) != PCI_HEADER_TYPE_BRIDGE) return 0; secondary = pciRead8(check, PCI_SECONDARY_BUS); subordinate = pciRead8(check, PCI_SUBORDINATE_BUS); VIR_DEBUG("%s %s: found parent device %s", dev->id, dev->name, check->name); /* if the secondary bus exactly equals the device's bus, then we found * the direct parent. No further work is necessary */ if (dev->bus == secondary) return 1; /* otherwise, SRIOV allows VFs to be on different busses then their PFs. * In this case, what we need to do is look for the "best" match; i.e. * the most restrictive match that still satisfies all of the conditions. */ if (dev->bus > secondary && dev->bus <= subordinate) { if (*best == NULL) { *best = pciGetDevice(check->domain, check->bus, check->slot, check->function); if (*best == NULL) return -1; } else { /* OK, we had already recorded a previous "best" match for the * parent. See if the current device is more restrictive than the * best, and if so, make it the new best */ if (secondary > pciRead8(*best, PCI_SECONDARY_BUS)) { pciFreeDevice(*best); *best = pciGetDevice(check->domain, check->bus, check->slot, check->function); if (*best == NULL) return -1; } } } return 0; } static int pciGetParentDevice(pciDevice *dev, pciDevice **parent) { pciDevice *best = NULL; int ret; *parent = NULL; ret = pciIterDevices(pciIsParent, dev, parent, &best); if (ret == 1) pciFreeDevice(best); else if (ret == 0) *parent = best; return ret; } /* Secondary Bus Reset is our sledgehammer - it resets all * devices behind a bus. */ static int pciTrySecondaryBusReset(pciDevice *dev, pciDeviceList *inactiveDevs) { pciDevice *parent, *conflict; uint8_t config_space[PCI_CONF_LEN]; uint16_t ctl; int ret = -1; /* For now, we just refuse to do a secondary bus reset * if there are other devices/functions behind the bus. * In future, we could allow it so long as those devices * are not in use by the host or other guests. */ if ((conflict = pciBusContainsActiveDevices(dev, inactiveDevs))) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Active %s devices on bus with %s, not doing bus reset"), conflict->name, dev->name); return -1; } /* Find the parent bus */ if (pciGetParentDevice(dev, &parent) < 0) return -1; if (!parent) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to find parent device for %s"), dev->name); return -1; } VIR_DEBUG("%s %s: doing a secondary bus reset", dev->id, dev->name); /* Save and restore the device's config space; we only do this * for the supplied device since we refuse to do a reset if there * are multiple devices/functions */ if (pciRead(dev, 0, config_space, PCI_CONF_LEN) < 0) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to read PCI config space for %s"), dev->name); goto out; } /* Read the control register, set the reset flag, wait 200ms, * unset the reset flag and wait 200ms. */ ctl = pciRead16(dev, PCI_BRIDGE_CONTROL); pciWrite16(parent, PCI_BRIDGE_CONTROL, ctl | PCI_BRIDGE_CTL_RESET); usleep(200 * 1000); /* sleep 200ms */ pciWrite16(parent, PCI_BRIDGE_CONTROL, ctl); usleep(200 * 1000); /* sleep 200ms */ if (pciWrite(dev, 0, config_space, PCI_CONF_LEN) < 0) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to restore PCI config space for %s"), dev->name); goto out; } ret = 0; out: pciFreeDevice(parent); return ret; } /* Power management reset attempts to reset a device using a * D-state transition from D3hot to D0. Note, in detect_pm_reset() * above we require the device supports a full internal reset. */ static int pciTryPowerManagementReset(pciDevice *dev) { uint8_t config_space[PCI_CONF_LEN]; uint32_t ctl; if (!dev->pci_pm_cap_pos) return -1; /* Save and restore the device's config space. */ if (pciRead(dev, 0, &config_space[0], PCI_CONF_LEN) < 0) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to read PCI config space for %s"), dev->name); return -1; } VIR_DEBUG("%s %s: doing a power management reset", dev->id, dev->name); ctl = pciRead32(dev, dev->pci_pm_cap_pos + PCI_PM_CTRL); ctl &= ~PCI_PM_CTRL_STATE_MASK; pciWrite32(dev, dev->pci_pm_cap_pos + PCI_PM_CTRL, ctl|PCI_PM_CTRL_STATE_D3hot); usleep(10 * 1000); /* sleep 10ms */ pciWrite32(dev, dev->pci_pm_cap_pos + PCI_PM_CTRL, ctl|PCI_PM_CTRL_STATE_D0); usleep(10 * 1000); /* sleep 10ms */ if (pciWrite(dev, 0, &config_space[0], PCI_CONF_LEN) < 0) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to restore PCI config space for %s"), dev->name); return -1; } return 0; } static int pciInitDevice(pciDevice *dev) { int flr; if (pciOpenConfig(dev) < 0) { virReportSystemError(errno, _("Failed to open config space file '%s'"), dev->path); return -1; } dev->pcie_cap_pos = pciFindCapabilityOffset(dev, PCI_CAP_ID_EXP); dev->pci_pm_cap_pos = pciFindCapabilityOffset(dev, PCI_CAP_ID_PM); flr = pciDetectFunctionLevelReset(dev); if (flr < 0) return flr; dev->has_flr = flr; dev->has_pm_reset = pciDetectPowerManagementReset(dev); dev->initted = 1; return 0; } int pciResetDevice(pciDevice *dev, pciDeviceList *activeDevs, pciDeviceList *inactiveDevs) { int ret = -1; if (activeDevs && pciDeviceListFind(activeDevs, dev)) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Not resetting active device %s"), dev->name); return -1; } if (!dev->initted && pciInitDevice(dev) < 0) return -1; /* KVM will perform FLR when starting and stopping * a guest, so there is no need for us to do it here. */ if (dev->has_flr) return 0; /* If the device supports PCI power management reset, * that's the next best thing because it only resets * the function, not the whole device. */ if (dev->has_pm_reset) ret = pciTryPowerManagementReset(dev); /* Bus reset is not an option with the root bus */ if (ret < 0 && dev->bus != 0) ret = pciTrySecondaryBusReset(dev, inactiveDevs); if (ret < 0) { virErrorPtr err = virGetLastError(); pciReportError(VIR_ERR_INTERNAL_ERROR, _("Unable to reset PCI device %s: %s"), dev->name, err ? err->message : _("no FLR, PM reset or bus reset available")); } return ret; } static int pciDriverDir(char **buffer, const char *driver) { VIR_FREE(*buffer); if (virAsprintf(buffer, PCI_SYSFS "drivers/%s", driver) < 0) { virReportOOMError(); return -1; } return 0; } static int pciDriverFile(char **buffer, const char *driver, const char *file) { VIR_FREE(*buffer); if (virAsprintf(buffer, PCI_SYSFS "drivers/%s/%s", driver, file) < 0) { virReportOOMError(); return -1; } return 0; } static int pciDeviceFile(char **buffer, const char *device, const char *file) { VIR_FREE(*buffer); if (virAsprintf(buffer, PCI_SYSFS "devices/%s/%s", device, file) < 0) { virReportOOMError(); return -1; } return 0; } static const char * pciFindStubDriver(void) { char *drvpath = NULL; int probed = 0; recheck: if (pciDriverDir(&drvpath, "pci-stub") < 0) { return NULL; } if (virFileExists(drvpath)) { VIR_FREE(drvpath); return "pci-stub"; } if (pciDriverDir(&drvpath, "pciback") < 0) { return NULL; } if (virFileExists(drvpath)) { VIR_FREE(drvpath); return "pciback"; } VIR_FREE(drvpath); if (!probed) { const char *const stubprobe[] = { MODPROBE, "pci-stub", NULL }; const char *const backprobe[] = { MODPROBE, "pciback", NULL }; probed = 1; /* * Probing for pci-stub will succeed regardless of whether * on native or Xen kernels. * On Xen though, we want to prefer pciback, so probe * for that first, because that will only work on Xen */ if (virRun(backprobe, NULL) < 0 && virRun(stubprobe, NULL) < 0) { char ebuf[1024]; VIR_WARN("failed to load pci-stub or pciback drivers: %s", virStrerror(errno, ebuf, sizeof ebuf)); return NULL; } goto recheck; } return NULL; } static int pciUnbindDeviceFromStub(pciDevice *dev, const char *driver) { int result = -1; char *drvdir = NULL; char *path = NULL; if (pciDriverDir(&drvdir, driver) < 0) goto cleanup; if (!dev->unbind_from_stub) goto remove_slot; /* If the device is bound to stub, unbind it. */ if (pciDeviceFile(&path, dev->name, "driver") < 0) goto cleanup; if (virFileExists(drvdir) && virFileLinkPointsTo(path, drvdir)) { if (pciDriverFile(&path, driver, "unbind") < 0) { goto cleanup; } if (virFileWriteStr(path, dev->name, 0) < 0) { virReportSystemError(errno, _("Failed to unbind PCI device '%s' from %s"), dev->name, driver); goto cleanup; } } dev->unbind_from_stub = 0; remove_slot: if (!dev->remove_slot) goto reprobe; /* Xen's pciback.ko wants you to use remove_slot on the specific device */ if (pciDriverFile(&path, driver, "remove_slot") < 0) { goto cleanup; } if (virFileExists(path) && virFileWriteStr(path, dev->name, 0) < 0) { virReportSystemError(errno, _("Failed to remove slot for PCI device '%s' from %s"), dev->name, driver); goto cleanup; } dev->remove_slot = 0; reprobe: if (!dev->reprobe) { result = 0; goto cleanup; } /* Trigger a re-probe of the device is not in the stub's dynamic * ID table. If the stub is available, but 'remove_id' isn't * available, then re-probing would just cause the device to be * re-bound to the stub. */ if (pciDriverFile(&path, driver, "remove_id") < 0) { goto cleanup; } if (!virFileExists(drvdir) || virFileExists(path)) { if (virFileWriteStr(PCI_SYSFS "drivers_probe", dev->name, 0) < 0) { virReportSystemError(errno, _("Failed to trigger a re-probe for PCI device '%s'"), dev->name); goto cleanup; } } result = 0; cleanup: /* do not do it again */ dev->unbind_from_stub = 0; dev->remove_slot = 0; dev->reprobe = 0; VIR_FREE(drvdir); VIR_FREE(path); return result; } static int pciBindDeviceToStub(pciDevice *dev, const char *driver) { int result = -1; char *drvdir = NULL; char *path = NULL; int reprobe = 0; /* check whether the device is already bound to a driver */ if (pciDriverDir(&drvdir, driver) < 0 || pciDeviceFile(&path, dev->name, "driver") < 0) { goto cleanup; } if (virFileExists(path)) { if (virFileLinkPointsTo(path, drvdir)) { /* The device is already bound to pci-stub */ result = 0; goto cleanup; } reprobe = 1; } /* Add the PCI device ID to the stub's dynamic ID table; * this is needed to allow us to bind the device to the stub. * Note: if the device is not currently bound to any driver, * stub will immediately be bound to the device. Also, note * that if a new device with this ID is hotplugged, or if a probe * is triggered for such a device, it will also be immediately * bound by the stub. */ if (pciDriverFile(&path, driver, "new_id") < 0) { goto cleanup; } if (virFileWriteStr(path, dev->id, 0) < 0) { virReportSystemError(errno, _("Failed to add PCI device ID '%s' to %s"), dev->id, driver); goto cleanup; } /* check whether the device is bound to pci-stub when we write dev->id to * new_id. */ if (pciDriverDir(&drvdir, driver) < 0 || pciDeviceFile(&path, dev->name, "driver") < 0) { goto remove_id; } if (virFileLinkPointsTo(path, drvdir)) { dev->unbind_from_stub = 1; dev->remove_slot = 1; goto remove_id; } /* If the device is already bound to a driver, unbind it. * Note, this will have rather unpleasant side effects if this * PCI device happens to be IDE controller for the disk hosting * your root filesystem. */ if (pciDeviceFile(&path, dev->name, "driver/unbind") < 0) { goto cleanup; } if (virFileExists(path)) { if (virFileWriteStr(path, dev->name, 0) < 0) { virReportSystemError(errno, _("Failed to unbind PCI device '%s'"), dev->name); goto cleanup; } dev->reprobe = reprobe; } /* If the device isn't already bound to pci-stub, try binding it now. */ if (pciDriverDir(&drvdir, driver) < 0 || pciDeviceFile(&path, dev->name, "driver") < 0) { goto remove_id; } if (!virFileLinkPointsTo(path, drvdir)) { /* Xen's pciback.ko wants you to use new_slot first */ if (pciDriverFile(&path, driver, "new_slot") < 0) { goto remove_id; } if (virFileExists(path) && virFileWriteStr(path, dev->name, 0) < 0) { virReportSystemError(errno, _("Failed to add slot for PCI device '%s' to %s"), dev->name, driver); goto remove_id; } dev->remove_slot = 1; if (pciDriverFile(&path, driver, "bind") < 0) { goto remove_id; } if (virFileWriteStr(path, dev->name, 0) < 0) { virReportSystemError(errno, _("Failed to bind PCI device '%s' to %s"), dev->name, driver); goto remove_id; } dev->unbind_from_stub = 1; } remove_id: /* If 'remove_id' exists, remove the device id from pci-stub's dynamic * ID table so that 'drivers_probe' works below. */ if (pciDriverFile(&path, driver, "remove_id") < 0) { /* We do not remove PCI ID from pci-stub, and we cannot reprobe it */ if (dev->reprobe) { VIR_WARN("Could not remove PCI ID '%s' from %s, and the device " "cannot be probed again.", dev->id, driver); } dev->reprobe = 0; goto cleanup; } if (virFileExists(path) && virFileWriteStr(path, dev->id, 0) < 0) { virReportSystemError(errno, _("Failed to remove PCI ID '%s' from %s"), dev->id, driver); /* remove PCI ID from pci-stub failed, and we cannot reprobe it */ if (dev->reprobe) { VIR_WARN("Failed to remove PCI ID '%s' from %s, and the device " "cannot be probed again.", dev->id, driver); } dev->reprobe = 0; goto cleanup; } result = 0; cleanup: VIR_FREE(drvdir); VIR_FREE(path); if (result < 0) { pciUnbindDeviceFromStub(dev, driver); } return result; } int pciDettachDevice(pciDevice *dev, pciDeviceList *activeDevs) { const char *driver = pciFindStubDriver(); if (!driver) { pciReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("cannot find any PCI stub module")); return -1; } if (activeDevs && pciDeviceListFind(activeDevs, dev)) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Not detaching active device %s"), dev->name); return -1; } return pciBindDeviceToStub(dev, driver); } int pciReAttachDevice(pciDevice *dev, pciDeviceList *activeDevs) { const char *driver = pciFindStubDriver(); if (!driver) { pciReportError(VIR_ERR_INTERNAL_ERROR, "%s", _("cannot find any PCI stub module")); return -1; } if (activeDevs && pciDeviceListFind(activeDevs, dev)) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Not reattaching active device %s"), dev->name); return -1; } return pciUnbindDeviceFromStub(dev, driver); } /* Certain hypervisors (like qemu/kvm) map the PCI bar(s) on * the host when doing device passthrough. This can lead to a race * condition where the hypervisor is still cleaning up the device while * libvirt is trying to re-attach it to the host device driver. To avoid * this situation, we look through /proc/iomem, and if the hypervisor is * still holding onto the bar (denoted by the string in the matcher variable), * then we can wait around a bit for that to clear up. * * A typical /proc/iomem looks like this (snipped for brevity): * 00010000-0008efff : System RAM * 0008f000-0008ffff : reserved * ... * 00100000-cc9fcfff : System RAM * 00200000-00483d3b : Kernel code * 00483d3c-005c88df : Kernel data * cc9fd000-ccc71fff : ACPI Non-volatile Storage * ... * d0200000-d02fffff : PCI Bus #05 * d0200000-d021ffff : 0000:05:00.0 * d0200000-d021ffff : e1000e * d0220000-d023ffff : 0000:05:00.0 * d0220000-d023ffff : e1000e * ... * f0000000-f0003fff : 0000:00:1b.0 * f0000000-f0003fff : kvm_assigned_device * * Returns 0 if we are clear to continue, and 1 if the hypervisor is still * holding onto the resource. */ int pciWaitForDeviceCleanup(pciDevice *dev, const char *matcher) { FILE *fp; char line[160]; char *tmp; unsigned long long start, end; unsigned int domain, bus, slot, function; int in_matching_device; int ret; size_t match_depth; fp = fopen("/proc/iomem", "r"); if (!fp) { /* If we failed to open iomem, we just basically ignore the error. The * unbind might succeed anyway, and besides, it's very likely we have * no way to report the error */ VIR_DEBUG("Failed to open /proc/iomem, trying to continue anyway"); return 0; } ret = 0; in_matching_device = 0; match_depth = 0; while (fgets(line, sizeof(line), fp) != 0) { /* the logic here is a bit confusing. For each line, we look to * see if it matches the domain:bus:slot.function we were given. * If this line matches the DBSF, then any subsequent lines indented * by 2 spaces are the PCI regions for this device. It's also * possible that none of the PCI regions are currently mapped, in * which case we have no indented regions. This code handles all * of these situations */ if (in_matching_device && (strspn(line, " ") == (match_depth + 2))) { /* expected format: - : */ if (/* start */ virStrToLong_ull(line, &tmp, 16, &start) < 0 || *tmp != '-' || /* end */ virStrToLong_ull(tmp + 1, &tmp, 16, &end) < 0 || (tmp = STRSKIP(tmp, " : ")) == NULL) continue; if (STRPREFIX(tmp, matcher)) { ret = 1; break; } } else { in_matching_device = 0; /* expected format: - : ::. */ if (/* start */ virStrToLong_ull(line, &tmp, 16, &start) < 0 || *tmp != '-' || /* end */ virStrToLong_ull(tmp + 1, &tmp, 16, &end) < 0 || (tmp = STRSKIP(tmp, " : ")) == NULL || /* domain */ virStrToLong_ui(tmp, &tmp, 16, &domain) < 0 || *tmp != ':' || /* bus */ virStrToLong_ui(tmp + 1, &tmp, 16, &bus) < 0 || *tmp != ':' || /* slot */ virStrToLong_ui(tmp + 1, &tmp, 16, &slot) < 0 || *tmp != '.' || /* function */ virStrToLong_ui(tmp + 1, &tmp, 16, &function) < 0 || *tmp != '\n') continue; if (domain != dev->domain || bus != dev->bus || slot != dev->slot || function != dev->function) continue; in_matching_device = 1; match_depth = strspn(line, " "); } } VIR_FORCE_FCLOSE(fp); return ret; } static char * pciReadDeviceID(pciDevice *dev, const char *id_name) { char *path = NULL; char *id_str; if (pciDeviceFile(&path, dev->name, id_name) < 0) { return NULL; } /* ID string is '0xNNNN\n' ... i.e. 7 bytes */ if (virFileReadAll(path, 7, &id_str) < 0) { VIR_FREE(path); return NULL; } VIR_FREE(path); /* Check for 0x suffix */ if (id_str[0] != '0' || id_str[1] != 'x') { VIR_FREE(id_str); return NULL; } /* Chop off the newline; we know the string is 7 bytes */ id_str[6] = '\0'; return id_str; } pciDevice * pciGetDevice(unsigned domain, unsigned bus, unsigned slot, unsigned function) { pciDevice *dev; char *vendor = NULL; char *product = NULL; if (VIR_ALLOC(dev) < 0) { virReportOOMError(); return NULL; } dev->fd = -1; dev->domain = domain; dev->bus = bus; dev->slot = slot; dev->function = function; if (snprintf(dev->name, sizeof(dev->name), "%.4x:%.2x:%.2x.%.1x", dev->domain, dev->bus, dev->slot, dev->function) >= sizeof(dev->name)) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("dev->name buffer overflow: %.4x:%.2x:%.2x.%.1x"), dev->domain, dev->bus, dev->slot, dev->function); goto error; } if (virAsprintf(&dev->path, PCI_SYSFS "devices/%s/config", dev->name) < 0) { virReportOOMError(); goto error; } if (access(dev->path, F_OK) != 0) { virReportSystemError(errno, _("Device %s not found: could not access %s"), dev->name, dev->path); goto error; } vendor = pciReadDeviceID(dev, "vendor"); product = pciReadDeviceID(dev, "device"); if (!vendor || !product) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to read product/vendor ID for %s"), dev->name); goto error; } /* strings contain '0x' prefix */ if (snprintf(dev->id, sizeof(dev->id), "%s %s", &vendor[2], &product[2]) >= sizeof(dev->id)) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("dev->id buffer overflow: %s %s"), &vendor[2], &product[2]); goto error; } VIR_DEBUG("%s %s: initialized", dev->id, dev->name); cleanup: VIR_FREE(product); VIR_FREE(vendor); return dev; error: pciFreeDevice(dev); dev = NULL; goto cleanup; } void pciFreeDevice(pciDevice *dev) { if (!dev) return; VIR_DEBUG("%s %s: freeing", dev->id, dev->name); pciCloseConfig(dev); VIR_FREE(dev->path); VIR_FREE(dev); } void pciDeviceSetManaged(pciDevice *dev, unsigned managed) { dev->managed = !!managed; } unsigned pciDeviceGetManaged(pciDevice *dev) { return dev->managed; } void pciDeviceReAttachInit(pciDevice *pci) { pci->unbind_from_stub = 1; pci->remove_slot = 1; pci->reprobe = 1; } pciDeviceList * pciDeviceListNew(void) { pciDeviceList *list; if (VIR_ALLOC(list) < 0) { virReportOOMError(); return NULL; } return list; } void pciDeviceListFree(pciDeviceList *list) { int i; if (!list) return; for (i = 0; i < list->count; i++) { pciFreeDevice(list->devs[i]); list->devs[i] = NULL; } list->count = 0; VIR_FREE(list->devs); VIR_FREE(list); } int pciDeviceListAdd(pciDeviceList *list, pciDevice *dev) { if (pciDeviceListFind(list, dev)) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Device %s is already in use"), dev->name); return -1; } if (VIR_REALLOC_N(list->devs, list->count+1) < 0) { virReportOOMError(); return -1; } list->devs[list->count++] = dev; return 0; } pciDevice * pciDeviceListGet(pciDeviceList *list, int idx) { if (idx >= list->count) return NULL; if (idx < 0) return NULL; return list->devs[idx]; } int pciDeviceListCount(pciDeviceList *list) { return list->count; } pciDevice * pciDeviceListSteal(pciDeviceList *list, pciDevice *dev) { pciDevice *ret = NULL; int i; for (i = 0; i < list->count; i++) { if (list->devs[i]->domain != dev->domain || list->devs[i]->bus != dev->bus || list->devs[i]->slot != dev->slot || list->devs[i]->function != dev->function) continue; ret = list->devs[i]; if (i != --list->count) memmove(&list->devs[i], &list->devs[i+1], sizeof(*list->devs) * (list->count-i)); if (VIR_REALLOC_N(list->devs, list->count) < 0) { ; /* not fatal */ } break; } return ret; } void pciDeviceListDel(pciDeviceList *list, pciDevice *dev) { pciDevice *ret = pciDeviceListSteal(list, dev); if (ret) pciFreeDevice(ret); } pciDevice * pciDeviceListFind(pciDeviceList *list, pciDevice *dev) { int i; for (i = 0; i < list->count; i++) if (list->devs[i]->domain == dev->domain && list->devs[i]->bus == dev->bus && list->devs[i]->slot == dev->slot && list->devs[i]->function == dev->function) return list->devs[i]; return NULL; } int pciDeviceFileIterate(pciDevice *dev, pciDeviceFileActor actor, void *opaque) { char *pcidir = NULL; char *file = NULL; DIR *dir = NULL; int ret = -1; struct dirent *ent; if (virAsprintf(&pcidir, "/sys/bus/pci/devices/%04x:%02x:%02x.%x", dev->domain, dev->bus, dev->slot, dev->function) < 0) { virReportOOMError(); goto cleanup; } if (!(dir = opendir(pcidir))) { virReportSystemError(errno, _("cannot open %s"), pcidir); goto cleanup; } while ((ent = readdir(dir)) != NULL) { /* Device assignment requires: * $PCIDIR/config, $PCIDIR/resource, $PCIDIR/resourceNNN, * $PCIDIR/rom, $PCIDIR/reset */ if (STREQ(ent->d_name, "config") || STRPREFIX(ent->d_name, "resource") || STREQ(ent->d_name, "rom") || STREQ(ent->d_name, "reset")) { if (virAsprintf(&file, "%s/%s", pcidir, ent->d_name) < 0) { virReportOOMError(); goto cleanup; } if ((actor)(dev, file, opaque) < 0) goto cleanup; VIR_FREE(file); } } ret = 0; cleanup: if (dir) closedir(dir); VIR_FREE(file); VIR_FREE(pcidir); return ret; } static int pciDeviceDownstreamLacksACS(pciDevice *dev) { uint16_t flags; uint16_t ctrl; unsigned int pos; if (!dev->initted && pciInitDevice(dev) < 0) return -1; pos = dev->pcie_cap_pos; if (!pos || pciRead16(dev, PCI_CLASS_DEVICE) != PCI_CLASS_BRIDGE_PCI) return 0; flags = pciRead16(dev, pos + PCI_EXP_FLAGS); if (((flags & PCI_EXP_FLAGS_TYPE) >> 4) != PCI_EXP_TYPE_DOWNSTREAM) return 0; pos = pciFindExtendedCapabilityOffset(dev, PCI_EXT_CAP_ID_ACS); if (!pos) { VIR_DEBUG("%s %s: downstream port lacks ACS", dev->id, dev->name); return 1; } ctrl = pciRead16(dev, pos + PCI_EXT_ACS_CTRL); if ((ctrl & PCI_EXT_CAP_ACS_ENABLED) != PCI_EXT_CAP_ACS_ENABLED) { VIR_DEBUG("%s %s: downstream port has ACS disabled", dev->id, dev->name); return 1; } return 0; } static int pciDeviceIsBehindSwitchLackingACS(pciDevice *dev) { pciDevice *parent; if (pciGetParentDevice(dev, &parent) < 0) return -1; if (!parent) { /* if we have no parent, and this is the root bus, ACS doesn't come * into play since devices on the root bus can't P2P without going * through the root IOMMU. */ if (dev->bus == 0) return 0; else { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to find parent device for %s"), dev->name); return -1; } } /* XXX we should rather fail when we can't find device's parent and * stop the loop when we get to root instead of just stopping when no * parent can be found */ do { pciDevice *tmp; int acs; int ret; acs = pciDeviceDownstreamLacksACS(parent); if (acs) { pciFreeDevice(parent); if (acs < 0) return -1; else return 1; } tmp = parent; ret = pciGetParentDevice(parent, &parent); pciFreeDevice(tmp); if (ret < 0) return -1; } while (parent); return 0; } int pciDeviceIsAssignable(pciDevice *dev, int strict_acs_check) { int ret; /* XXX This could be a great place to actually check that a non-managed * device isn't in use, e.g. by checking that device is either un-bound * or bound to a stub driver. */ ret = pciDeviceIsBehindSwitchLackingACS(dev); if (ret < 0) return 0; if (ret) { if (!strict_acs_check) { VIR_DEBUG("%s %s: strict ACS check disabled; device assignment allowed", dev->id, dev->name); } else { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Device %s is behind a switch lacking ACS and " "cannot be assigned"), dev->name); return 0; } } return 1; } #ifdef __linux__ /* * returns 1 if equal and 0 if not */ static int pciConfigAddressEqual(struct pci_config_address *bdf1, struct pci_config_address *bdf2) { return ((bdf1->domain == bdf2->domain) && (bdf1->bus == bdf2->bus) && (bdf1->slot == bdf2->slot) && (bdf1->function == bdf2->function)); } static int logStrToLong_ui(char const *s, char **end_ptr, int base, unsigned int *result) { int ret = 0; ret = virStrToLong_ui(s, end_ptr, base, result); if (ret != 0) { VIR_ERROR(_("Failed to convert '%s' to unsigned int"), s); } else { VIR_DEBUG("Converted '%s' to unsigned int %u", s, *result); } return ret; } static int pciParsePciConfigAddress(char *address, struct pci_config_address *bdf) { char *p = NULL; int ret = -1; if ((address == NULL) || (logStrToLong_ui(address, &p, 16, &bdf->domain) == -1)) { goto out; } if ((p == NULL) || (logStrToLong_ui(p+1, &p, 16, &bdf->bus) == -1)) { goto out; } if ((p == NULL) || (logStrToLong_ui(p+1, &p, 16, &bdf->slot) == -1)) { goto out; } if ((p == NULL) || (logStrToLong_ui(p+1, &p, 16, &bdf->function) == -1)) { goto out; } ret = 0; out: return ret; } static int pciGetPciConfigAddressFromSysfsDeviceLink(const char *device_link, struct pci_config_address **bdf) { char *config_address = NULL; char *device_path = NULL; char errbuf[64]; int ret = -1; VIR_DEBUG("Attempting to resolve device path from device link '%s'", device_link); if (!virFileExists(device_link)) { VIR_DEBUG("sysfs_path '%s' does not exist", device_link); return ret; } device_path = canonicalize_file_name (device_link); if (device_path == NULL) { memset(errbuf, '\0', sizeof(errbuf)); pciReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to resolve device link '%s': '%s'"), device_link, virStrerror(errno, errbuf, sizeof(errbuf))); return ret; } config_address = basename(device_path); if (VIR_ALLOC(*bdf) != 0) { virReportOOMError(); goto out; } if (pciParsePciConfigAddress(config_address, *bdf) != 0) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to parse PCI config address '%s'"), config_address); VIR_FREE(*bdf); goto out; } VIR_DEBUG("pci_config_address %.4x:%.2x:%.2x.%.1x", (*bdf)->domain, (*bdf)->bus, (*bdf)->slot, (*bdf)->function); ret = 0; out: VIR_FREE(device_path); return ret; } /* * Returns Physical function given a virtual function */ int pciGetPhysicalFunction(const char *vf_sysfs_path, struct pci_config_address **physical_function) { int ret = -1; char *device_link = NULL; VIR_DEBUG("Attempting to get SR IOV physical function for device " "with sysfs path '%s'", vf_sysfs_path); if (virBuildPath(&device_link, vf_sysfs_path, "physfn") == -1) { virReportOOMError(); return ret; } else { ret = pciGetPciConfigAddressFromSysfsDeviceLink(device_link, physical_function); } VIR_FREE(device_link); return ret; } /* * Returns virtual functions of a physical function */ int pciGetVirtualFunctions(const char *sysfs_path, struct pci_config_address ***virtual_functions, unsigned int *num_virtual_functions) { int ret = -1; DIR *dir = NULL; struct dirent *entry = NULL; char *device_link = NULL; char errbuf[64]; VIR_DEBUG("Attempting to get SR IOV virtual functions for device" "with sysfs path '%s'", sysfs_path); dir = opendir(sysfs_path); if (dir == NULL) { memset(errbuf, '\0', sizeof(errbuf)); pciReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to open dir '%s': '%s'"), sysfs_path, virStrerror(errno, errbuf, sizeof(errbuf))); return ret; } *virtual_functions = NULL; *num_virtual_functions = 0; while ((entry = readdir(dir))) { if (STRPREFIX(entry->d_name, "virtfn")) { if (virBuildPath(&device_link, sysfs_path, entry->d_name) == -1) { virReportOOMError(); goto out; } VIR_DEBUG("Number of virtual functions: %d", *num_virtual_functions); if (VIR_REALLOC_N(*virtual_functions, (*num_virtual_functions) + 1) != 0) { virReportOOMError(); VIR_FREE(device_link); goto out; } if (pciGetPciConfigAddressFromSysfsDeviceLink(device_link, &((*virtual_functions)[*num_virtual_functions])) != SRIOV_FOUND) { /* We should not get back SRIOV_NOT_FOUND in this * case, so if we do, it's an error. */ pciReportError(VIR_ERR_INTERNAL_ERROR, _("Failed to get SR IOV function from device " "link '%s'"), device_link); VIR_FREE(device_link); goto out; } else { (*num_virtual_functions)++; } VIR_FREE(device_link); } } ret = 0; out: if (dir) closedir(dir); return ret; } /* * Returns 1 if vf device is a virtual function, 0 if not, -1 on error */ int pciDeviceIsVirtualFunction(const char *vf_sysfs_device_link) { char *vf_sysfs_physfn_link = NULL; int ret = -1; if (virAsprintf(&vf_sysfs_physfn_link, "%s/physfn", vf_sysfs_device_link) < 0) { virReportOOMError(); return ret; } ret = virFileExists(vf_sysfs_physfn_link); VIR_FREE(vf_sysfs_physfn_link); return ret; } /* * Returns the sriov virtual function index of vf given its pf */ int pciGetVirtualFunctionIndex(const char *pf_sysfs_device_link, const char *vf_sysfs_device_link, int *vf_index) { int ret = -1, i; unsigned int num_virt_fns = 0; struct pci_config_address *vf_bdf = NULL; struct pci_config_address **virt_fns = NULL; if (pciGetPciConfigAddressFromSysfsDeviceLink(vf_sysfs_device_link, &vf_bdf)) return ret; if (pciGetVirtualFunctions(pf_sysfs_device_link, &virt_fns, &num_virt_fns)) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("Error getting physical function's '%s' " "virtual_functions"), pf_sysfs_device_link); goto out; } for (i = 0; i < num_virt_fns; i++) { if (pciConfigAddressEqual(vf_bdf, virt_fns[i])) { *vf_index = i; ret = 0; break; } } out: /* free virtual functions */ for (i = 0; i < num_virt_fns; i++) VIR_FREE(virt_fns[i]); VIR_FREE(vf_bdf); return ret; } /* * Returns the network device name of a pci device */ int pciDeviceNetName(char *device_link_sysfs_path, char **netname) { char *pcidev_sysfs_net_path = NULL; int ret = -1; DIR *dir = NULL; struct dirent *entry = NULL; if (virBuildPath(&pcidev_sysfs_net_path, device_link_sysfs_path, "net") == -1) { virReportOOMError(); return -1; } dir = opendir(pcidev_sysfs_net_path); if (dir == NULL) goto out; while ((entry = readdir(dir))) { if (STREQ(entry->d_name, ".") || STREQ(entry->d_name, "..")) continue; /* Assume a single directory entry */ *netname = strdup(entry->d_name); ret = 0; break; } closedir(dir); out: VIR_FREE(pcidev_sysfs_net_path); return ret; } #else int pciGetPhysicalFunction(const char *vf_sysfs_path ATTRIBUTE_UNUSED, struct pci_config_address **physical_function ATTRIBUTE_UNUSED) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("pciGetPhysicalFunction is not " "supported on non-linux platforms")); return -1; } int pciGetVirtualFunctions(const char *sysfs_path ATTRIBUTE_UNUSED, struct pci_config_address ***virtual_functions ATTRIBUTE_UNUSED, unsigned int *num_virtual_functions ATTRIBUTE_UNUSED) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("pciGetVirtualFunctions is not " "supported on non-linux platforms")); return -1; } int pciDeviceIsVirtualFunction(const char *vf_sysfs_device_link ATTRIBUTE_UNUSED) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("pciDeviceIsVirtualFunction is " "not supported on non-linux platforms")); return -1; } int pciGetVirtualFunctionIndex(const char *pf_sysfs_device_link ATTRIBUTE_UNUSED, const char *vf_sysfs_device_link ATTRIBUTE_UNUSED, int *vf_index ATTRIBUTE_UNUSED) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("pciGetVirtualFunctionIndex is " "not supported on non-linux platforms")); return -1; } int pciDeviceNetName(char *device_link_sysfs_path ATTRIBUTE_UNUSED, char **netname ATTRIBUTE_UNUSED) { pciReportError(VIR_ERR_INTERNAL_ERROR, _("pciDeviceNetName is not " "supported on non-linux platforms")); return -1; } #endif /* __linux__ */