# translation of zh_TW.po to Traditional Chinese
# Copyright (C) 2006, 2007 Free Software Foundation, Inc.
# This file is distributed under the same license as the libvirt package.
#
# Chester Cheng <ccheng@redhat.com>, 2006, 2007.
msgid ""
msgstr ""
"Project-Id-Version: zh_TW\n"
"Report-Msgid-Bugs-To: libvir-list@redhat.com\n"
"POT-Creation-Date: 2011-04-04 16:22+0800\n"
"PO-Revision-Date: 2007-04-10 16:18+1000\n"
"Last-Translator: Chester Cheng <ccheng@redhat.com>\n"
"Language-Team: Traditional Chinese <zh_TW@li.org>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: daemon/dispatch.c:383
#, c-format
msgid "program mismatch (actual %x, expected %x or %x)"
msgstr ""

#: daemon/dispatch.c:390 daemon/dispatch.c:396
#, c-format
msgid "version mismatch (actual %x, expected %x)"
msgstr ""

#: daemon/dispatch.c:416
#, c-format
msgid "type (%d) != REMOTE_CALL"
msgstr ""

#: daemon/dispatch.c:465
#, c-format
msgid "status (%d) != REMOTE_OK"
msgstr ""

#: daemon/dispatch.c:483
#, fuzzy
msgid "authentication required"
msgstr "操作失敗"

#: daemon/dispatch.c:494
#, fuzzy, c-format
msgid "unknown procedure: %d"
msgstr "收到未知的 HTTP 錯誤碼 %d"

#: daemon/dispatch.c:506
#, fuzzy
msgid "parse args failed"
msgstr "無法解析伺服器的回應"

#: daemon/dispatch.c:547
#, fuzzy
msgid "failed to serialize reply header"
msgstr "無法為 S-Expr 製作序列號"

#: daemon/dispatch.c:559 daemon/dispatch.c:574
#, fuzzy
msgid "failed to change XDR reply offset"
msgstr "無法連上 Xen Store"

#: daemon/dispatch.c:566
msgid "failed to serialize reply payload (probable message size limit)"
msgstr ""

#: daemon/dispatch.c:579
#, fuzzy
msgid "failed to update reply length header"
msgstr "無法 urlencode 以建立 S-Expr"

#: daemon/libvirtd.c:308
#, c-format
msgid "Cannot access %s '%s': %s"
msgstr ""

#: daemon/libvirtd.c:325
#, c-format
msgid "gnutls_certificate_allocate_credentials: %s"
msgstr ""

#: daemon/libvirtd.c:338
#, c-format
msgid "gnutls_certificate_set_x509_trust_file: %s"
msgstr ""

#: daemon/libvirtd.c:352
#, c-format
msgid "gnutls_certificate_set_x509_crl_file: %s"
msgstr ""

#: daemon/libvirtd.c:369
#, c-format
msgid "gnutls_certificate_set_x509_key_file: %s"
msgstr ""

#: daemon/libvirtd.c:382
#, c-format
msgid "gnutls_dh_params_init: %s"
msgstr ""

#: daemon/libvirtd.c:387
#, c-format
msgid "gnutls_dh_params_generate2: %s"
msgstr ""

#: daemon/libvirtd.c:408
#, fuzzy, c-format
msgid "Failed to read from signal pipe: %s"
msgstr "無法讀取描述檔 %s"

#: daemon/libvirtd.c:416
#, fuzzy
msgid "Reloading configuration on SIGHUP"
msgstr "分配設定"

#: daemon/libvirtd.c:432
#, fuzzy, c-format
msgid "Received unexpected signal %d"
msgstr "無預期的數值節點"

#: daemon/libvirtd.c:516
#, c-format
msgid ""
"%s: error: %s. Check /var/log/messages or run without --daemon for more "
"info.\n"
msgstr ""

#: daemon/libvirtd.c:534
#, fuzzy, c-format
msgid "Failed to open pid file '%s' : %s"
msgstr "無法暫停區域 %s"

#: daemon/libvirtd.c:540
#, fuzzy, c-format
msgid "Failed to fdopen pid file '%s' : %s"
msgstr "無法暫停區域 %s"

#: daemon/libvirtd.c:547
#, fuzzy, c-format
msgid "%s: Failed to write to pid file '%s' : %s"
msgstr "無法寫入設定檔"

#: daemon/libvirtd.c:554
#, fuzzy, c-format
msgid "%s: Failed to close pid file '%s' : %s"
msgstr "無法暫停區域 %s"

#: daemon/libvirtd.c:569
#, fuzzy
msgid "Failed to allocate memory for struct qemud_socket"
msgstr "無法分配節點"

#: daemon/libvirtd.c:579
#, fuzzy, c-format
msgid "Failed to copy socket address: %s"
msgstr "無法關閉插槽 %d\n"

#: daemon/libvirtd.c:585
#, fuzzy, c-format
msgid "Failed to create socket: %s"
msgstr "無法讀取插槽 %d\n"

#: daemon/libvirtd.c:596
#, c-format
msgid "Path %s too long for unix socket"
msgstr ""

#: daemon/libvirtd.c:604
#, fuzzy, c-format
msgid "Failed to bind socket to '%s': %s"
msgstr "無法暫停區域 %s"

#: daemon/libvirtd.c:615
#, fuzzy, c-format
msgid "Failed to change group ID of '%s' to %d: %s"
msgstr "無法將區域 %s 的核心傾印至 %s"

#: daemon/libvirtd.c:622
#, fuzzy, c-format
msgid "Failed to listen for connections on '%s': %s"
msgstr "無法暫停區域 %s"

#: daemon/libvirtd.c:651
#, c-format
msgid "getaddrinfo: %s"
msgstr ""

#: daemon/libvirtd.c:661
#, c-format
msgid "socket: %s"
msgstr ""

#: daemon/libvirtd.c:685
#, c-format
msgid "bind: %s"
msgstr ""

#: daemon/libvirtd.c:721
#, c-format
msgid "remoteListenTCP: calloc: %s"
msgstr ""

#: daemon/libvirtd.c:747
#, c-format
msgid "remoteListenTCP: listen: %s"
msgstr ""

#: daemon/libvirtd.c:789
#, fuzzy, c-format
msgid "Failed to change group ownership of %s"
msgstr "無法將區域 %s 的核心傾印至 %s"

#: daemon/libvirtd.c:878
#, fuzzy
msgid "Failed to allocate struct qemud_server"
msgstr "無法分配節點"

#: daemon/libvirtd.c:886 daemon/libvirtd.c:1411 src/conf/domain_conf.c:1023
#: src/conf/interface_conf.c:1241 src/conf/network_conf.c:174
#: src/conf/node_device_conf.c:194 src/conf/nwfilter_conf.c:2410
#: src/conf/storage_conf.c:1393 src/libxl/libxl_driver.c:573
#: src/openvz/openvz_conf.c:471 src/qemu/qemu_driver.c:382
#: src/remote/remote_driver.c:1012 src/remote/remote_driver.c:8569
#: src/remote/remote_driver.c:8755 src/remote/remote_driver.c:9791
#: src/test/test_driver.c:522 src/test/test_driver.c:770
#: src/xen/xen_driver.c:330
msgid "cannot initialize mutex"
msgstr ""

#: daemon/libvirtd.c:891
msgid "cannot initialize condition variable"
msgstr ""

#: daemon/libvirtd.c:986
#, fuzzy, c-format
msgid "Failed to initialize SASL authentication %s"
msgstr "無法為網路 %s 取消定義"

#: daemon/libvirtd.c:1004
#, fuzzy, c-format
msgid "Failed to connect to system bus for PolicyKit auth: %s"
msgstr "無法連上 hypervisor"

#: daemon/libvirtd.c:1106
msgid "Failed to add server event callback"
msgstr ""

#: daemon/libvirtd.c:1143
#, c-format
msgid "remoteInitializeTLSSession: %s"
msgstr ""

#: daemon/libvirtd.c:1185
#, fuzzy, c-format
msgid "Failed to verify certificate peers: %s"
msgstr "無法取得節點資訊"

#: daemon/libvirtd.c:1192
msgid "The client certificate is not trusted."
msgstr ""

#: daemon/libvirtd.c:1195
msgid "The client certificate has unknown issuer."
msgstr ""

#: daemon/libvirtd.c:1198
msgid "The client certificate has been revoked."
msgstr ""

#: daemon/libvirtd.c:1202
msgid "The client certificate uses an insecure algorithm."
msgstr ""

#: daemon/libvirtd.c:1209
msgid "Only x509 certificates are supported"
msgstr ""

#: daemon/libvirtd.c:1214
msgid "The certificate has no peers"
msgstr ""

#: daemon/libvirtd.c:1224
msgid "Unable to initialize certificate"
msgstr ""

#: daemon/libvirtd.c:1229
msgid "Unable to load certificate"
msgstr ""

#: daemon/libvirtd.c:1237
#, fuzzy, c-format
msgid "Failed to get certificate distinguished name: %s"
msgstr "無法取得節點資訊"

#: daemon/libvirtd.c:1245
msgid ""
"Client's Distinguished Name is not on the list of allowed clients "
"(tls_allowed_dn_list).  Use 'certtool -i --infile clientcert.pem' to view "
"theDistinguished Name field in the client certificate,or run this daemon "
"with --verbose option."
msgstr ""

#: daemon/libvirtd.c:1256
msgid "The client certificate has expired"
msgstr ""

#: daemon/libvirtd.c:1262
msgid "The client certificate is not yet active"
msgstr ""

#: daemon/libvirtd.c:1288
msgid "remoteCheckCertificate: failed to verify client's certificate"
msgstr ""

#: daemon/libvirtd.c:1291
msgid ""
"remoteCheckCertificate: tls_no_verify_certificate is set so the bad "
"certificate is ignored"
msgstr ""

#: daemon/libvirtd.c:1297
msgid "client had unexpected data pending tx after access check"
msgstr ""

#: daemon/libvirtd.c:1325
#, fuzzy, c-format
msgid "Failed to verify client credentials: %s"
msgstr "無法取得節點資訊"

#: daemon/libvirtd.c:1354
#, fuzzy, c-format
msgid "Failed to accept connection: %s"
msgstr "無法開啟網路 %s"

#: daemon/libvirtd.c:1359
#, fuzzy
msgid "Failed to format addresss: out of memory"
msgstr "無法分配節點"

#: daemon/libvirtd.c:1367
#, c-format
msgid "Too many active clients (%d), dropping connection from %s"
msgstr ""

#: daemon/libvirtd.c:1374
#, fuzzy
msgid "Out of memory allocating clients"
msgstr "改變記憶體分配"

#: daemon/libvirtd.c:1448
#, c-format
msgid "Turn off polkit auth for privileged client pid %d from %s"
msgstr ""

#: daemon/libvirtd.c:1489
#, c-format
msgid "TLS handshake failed for client %s: %s"
msgstr ""

#: daemon/libvirtd.c:1688 daemon/libvirtd.c:1938
#, c-format
msgid "unexpected negative length request %lld"
msgstr ""

#: daemon/libvirtd.c:1704
#, c-format
msgid "read: %s"
msgstr ""

#: daemon/libvirtd.c:1717
#, c-format
msgid "gnutls_record_recv: %s"
msgstr ""

#: daemon/libvirtd.c:1779
#, fuzzy, c-format
msgid "failed to decode SASL data %s"
msgstr "無法刪除區域 %s"

#: daemon/libvirtd.c:1949
#, c-format
msgid "write: %s"
msgstr ""

#: daemon/libvirtd.c:1960
#, c-format
msgid "gnutls_record_send: %s"
msgstr ""

#: daemon/libvirtd.c:2009
#, fuzzy, c-format
msgid "failed to encode SASL data %s"
msgstr "無法暫停區域 %s"

#: daemon/libvirtd.c:2138
#, fuzzy, c-format
msgid "TLS handshake failed: %s"
msgstr "GET 操作失敗：%s"

#: daemon/libvirtd.c:2286
#, c-format
msgid "Signal handler reported %d errors: last error: %s"
msgstr ""

#: daemon/libvirtd.c:2346
#, fuzzy
msgid "Failed to register shutdown timeout"
msgstr "無法關上區域 %s"

#: daemon/libvirtd.c:2355
#, fuzzy
msgid "Failed to allocate workers"
msgstr "無法分配節點"

#: daemon/libvirtd.c:2556 daemon/libvirtd.c:2575
#, fuzzy, c-format
msgid "failed to allocate memory for %s config list"
msgstr "無法分配節點"

#: daemon/libvirtd.c:2562 daemon/libvirtd.c:2592
#, fuzzy, c-format
msgid "failed to allocate memory for %s config list value"
msgstr "無法分配節點"

#: daemon/libvirtd.c:2580 daemon/libvirtd.c:2603
#, c-format
msgid "remoteReadConfigFile: %s: %s: must be a string or list of strings"
msgstr ""

#: daemon/libvirtd.c:2619
#, c-format
msgid "remoteReadConfigFile: %s: %s: invalid type: got %s; expected %s"
msgstr ""

#: daemon/libvirtd.c:2641
#, c-format
msgid "remoteReadConfigFile: %s"
msgstr ""

#: daemon/libvirtd.c:2684
#, c-format
msgid "remoteReadConfigFile: %s: %s: unsupported auth %s"
msgstr ""

#: daemon/libvirtd.c:2890
#, fuzzy
msgid "Failed to allocate memory for buffer"
msgstr "無法分配節點"

#: daemon/libvirtd.c:2899
#, fuzzy
msgid "Failed to reallocate enough memory for buffer"
msgstr "無法分配節點"

#: daemon/libvirtd.c:2905
#, fuzzy, c-format
msgid "Failed to lookup group '%s'"
msgstr "無法暫停區域 %s"

#: daemon/libvirtd.c:2917 daemon/libvirtd.c:2926
#, fuzzy, c-format
msgid "Failed to parse mode '%s'"
msgstr "無法暫停區域 %s"

#: daemon/libvirtd.c:2964
#, fuzzy, c-format
msgid "invalid host UUID: %s"
msgstr "無效的參數，於 %s"

#: daemon/libvirtd.c:3013
msgid "additional privileges are required"
msgstr ""

#: daemon/libvirtd.c:3019
#, fuzzy
msgid "failed to set reduced privileges"
msgstr "無法取得能力方面的資訊"

#: daemon/libvirtd.c:3052
#, fuzzy, c-format
msgid "Failed to create pipe: %s"
msgstr "無法讀取插槽 %d\n"

#: daemon/libvirtd.c:3085
msgid "Failed to register callback for signal pipe"
msgstr ""

#: daemon/libvirtd.c:3106
#, c-format
msgid ""
"\n"
"Usage:\n"
"  %s [options]\n"
"\n"
"Options:\n"
"  -v | --verbose         Verbose messages.\n"
"  -d | --daemon          Run as a daemon & write PID file.\n"
"  -l | --listen          Listen for TCP/IP connections.\n"
"  -t | --timeout <secs>  Exit after timeout period.\n"
"  -f | --config <file>   Configuration file.\n"
"     | --version         Display version information.\n"
"  -p | --pid-file <file> Change name of PID file.\n"
"\n"
"libvirt management daemon:\n"
"\n"
"  Default paths:\n"
"\n"
"    Configuration file (unless overridden by -f):\n"
"      %s/libvirt/libvirtd.conf\n"
"\n"
"    Sockets (as root):\n"
"      %s/run/libvirt/libvirt-sock\n"
"      %s/run/libvirt/libvirt-sock-ro\n"
"\n"
"    Sockets (as non-root):\n"
"      $HOME/.libvirt/libvirt-sock (in UNIX abstract namespace)\n"
"\n"
"    TLS:\n"
"      CA certificate:     %s\n"
"      Server certificate: %s\n"
"      Server private key: %s\n"
"\n"
"    PID file (unless overridden by --pid-file):\n"
"      %s\n"
"\n"
msgstr ""

#: daemon/libvirtd.c:3150
msgid "(disabled in ./configure)"
msgstr ""

#: daemon/libvirtd.c:3182 src/lxc/lxc_controller.c:791
#: src/security/virt-aa-helper.c:1143 src/storage/parthelper.c:75
#: src/util/iohelper.c:153 src/util/iohelper.c:160
#, fuzzy, c-format
msgid "%s: initialization failed\n"
msgstr "操作失敗"

#: daemon/libvirtd.c:3236
#, c-format
msgid "%s: internal error: unknown flag: %c\n"
msgstr ""

#: daemon/libvirtd.c:3255
#, c-format
msgid "cannot change to root directory: %s"
msgstr ""

#: daemon/libvirtd.c:3261
#, fuzzy, c-format
msgid "Failed to fork as daemon: %s"
msgstr "無法繼續區域 %s"

#: daemon/libvirtd.c:3290
#, fuzzy, c-format
msgid "unable to create rundir %s: %s"
msgstr "無法從 %s 建立區域"

#: daemon/libvirtd.c:3375
msgid "Event thread startup failed"
msgstr ""

#: daemon/libvirtd.c:3384
#, fuzzy
msgid "Driver state initialization failed"
msgstr "操作失敗"

#: daemon/libvirtd.c:3391
msgid "Network event loop enablement failed"
msgstr ""

#: daemon/remote.c:406
msgid "connection already open"
msgstr ""

#: daemon/remote.c:437
#, fuzzy
msgid "connection not open"
msgstr "無效的連線指標，於 "

#: daemon/remote.c:694
msgid "maxCells > REMOTE_NODE_MAX_CELLS"
msgstr ""

#: daemon/remote.c:788 daemon/remote.c:872 daemon/remote.c:2437
#: daemon/remote.c:2532 daemon/remote.c:2648 daemon/remote.c:2743
msgid "nparams too large"
msgstr ""

#: daemon/remote.c:837 daemon/remote.c:2606 daemon/remote.c:2817
#, fuzzy
msgid "unknown type"
msgstr "未知的作業系統類型"

#: daemon/remote.c:883 daemon/remote.c:2451 daemon/remote.c:2662
#: src/esx/esx_driver.c:4546
#, fuzzy, c-format
msgid "Field %s too big for destination"
msgstr "無法取得節點資訊"

#: daemon/remote.c:1013
msgid "maxStats > REMOTE_DOMAIN_MEMORY_STATS_MAX"
msgstr ""

#: daemon/remote.c:1084 daemon/remote.c:1133
msgid "size > maximum buffer size"
msgstr ""

#: daemon/remote.c:1722
msgid "maxinfo > REMOTE_VCPUINFO_MAX"
msgstr ""

#: daemon/remote.c:1728
msgid "maxinfo * maplen > REMOTE_CPUMAPS_MAX"
msgstr ""

#: daemon/remote.c:2047
msgid "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX"
msgstr ""

#: daemon/remote.c:2174
msgid "cpumap_len > REMOTE_CPUMAP_MAX"
msgstr ""

#: daemon/remote.c:2980 daemon/remote.c:3126 daemon/remote.c:4570
msgid "maxnames > REMOTE_NETWORK_NAME_LIST_MAX"
msgstr ""

#: daemon/remote.c:3014
msgid "maxids > REMOTE_DOMAIN_ID_LIST_MAX"
msgstr ""

#: daemon/remote.c:3512
msgid "maxnames > REMOTE_INTERFACE_NAME_LIST_MAX"
msgstr ""

#: daemon/remote.c:3565
msgid "maxnames > REMOTE_DEFINED_INTERFACE_NAME_LIST_MAX"
msgstr ""

#: daemon/remote.c:3814
msgid "client tried invalid SASL init request"
msgstr ""

#: daemon/remote.c:3823
#, fuzzy, c-format
msgid "failed to get sock address: %s"
msgstr "無法將區域 %s 存至 %s"

#: daemon/remote.c:3836
#, fuzzy, c-format
msgid "failed to get peer address: %s"
msgstr "無法取得網路「%s」"

#: daemon/remote.c:3858
#, c-format
msgid "sasl context setup failed %d (%s)"
msgstr ""

#: daemon/remote.c:3871
msgid "cannot get TLS cipher size"
msgstr ""

#: daemon/remote.c:3880
#, c-format
msgid "cannot set SASL external SSF %d (%s)"
msgstr ""

#: daemon/remote.c:3908
#, c-format
msgid "cannot set SASL security props %d (%s)"
msgstr ""

#: daemon/remote.c:3924
#, c-format
msgid "cannot list SASL mechanisms %d (%s)"
msgstr ""

#: daemon/remote.c:3933
msgid "cannot allocate mechlist"
msgstr ""

#: daemon/remote.c:3967 src/remote/remote_driver.c:7723
#, c-format
msgid "cannot query SASL ssf on connection %d (%s)"
msgstr ""

#: daemon/remote.c:3977
#, c-format
msgid "negotiated SSF %d was not strong enough"
msgstr ""

#: daemon/remote.c:4009
#, c-format
msgid "cannot query SASL username on connection %d (%s)"
msgstr ""

#: daemon/remote.c:4017
msgid "no client username was found"
msgstr ""

#: daemon/remote.c:4027
#, fuzzy
msgid "out of memory copying username"
msgstr "記憶體不足"

#: daemon/remote.c:4046
#, c-format
msgid "SASL client %s not allowed in whitelist"
msgstr ""

#: daemon/remote.c:4077 daemon/remote.c:4177
msgid "client tried invalid SASL start request"
msgstr ""

#: daemon/remote.c:4092
#, c-format
msgid "sasl start failed %d (%s)"
msgstr ""

#: daemon/remote.c:4099
#, c-format
msgid "sasl start reply data too long %d"
msgstr ""

#: daemon/remote.c:4191
#, c-format
msgid "sasl step failed %d (%s)"
msgstr ""

#: daemon/remote.c:4199
#, c-format
msgid "sasl step reply data too long %d"
msgstr ""

#: daemon/remote.c:4268
msgid "client tried unsupported SASL init request"
msgstr ""

#: daemon/remote.c:4283
msgid "client tried unsupported SASL start request"
msgstr ""

#: daemon/remote.c:4298
msgid "client tried unsupported SASL step request"
msgstr ""

#: daemon/remote.c:4344 daemon/remote.c:4436
msgid "client tried invalid PolicyKit init request"
msgstr ""

#: daemon/remote.c:4349 daemon/remote.c:4441
msgid "cannot get peer socket identity"
msgstr ""

#: daemon/remote.c:4353 daemon/remote.c:4451
#, c-format
msgid "Checking PID %d running as %d"
msgstr ""

#: daemon/remote.c:4357
#, c-format
msgid "Caller PID was too large %d"
msgstr ""

#: daemon/remote.c:4363 daemon/remote.c:4447
#, c-format
msgid "Caller identity was too large %d:%d"
msgstr ""

#: daemon/remote.c:4368
#, c-format
msgid "Cannot invoke %s"
msgstr ""

#: daemon/remote.c:4373
#, c-format
msgid "Policy kit denied action %s from pid %d, uid %d: %s"
msgstr ""

#: daemon/remote.c:4380
#, c-format
msgid "Policy allowed action %s from pid %d, uid %d"
msgstr ""

#: daemon/remote.c:4455
#, c-format
msgid "Failed to lookup policy kit caller: %s"
msgstr ""

#: daemon/remote.c:4462
#, fuzzy, c-format
msgid "Failed to create polkit action %s"
msgstr "無法建立非運作中的區域 %s\n"

#: daemon/remote.c:4472
#, fuzzy, c-format
msgid "Failed to create polkit context %s"
msgstr "無法從 %s 建立區域"

#: daemon/remote.c:4490
#, c-format
msgid "Policy kit failed to check authorization %d %s"
msgstr ""

#: daemon/remote.c:4504
#, c-format
msgid "Policy kit denied action %s from pid %d, uid %d, result: %s"
msgstr ""

#: daemon/remote.c:4511
#, c-format
msgid "Policy allowed action %s from pid %d, uid %d, result %s"
msgstr ""

#: daemon/remote.c:4546
msgid "client tried unsupported PolicyKit init request"
msgstr ""

#: daemon/remote.c:4604
msgid "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX"
msgstr ""

#: daemon/remote.c:5091
msgid "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX"
msgstr ""

#: daemon/remote.c:5496 daemon/remote.c:5671
msgid "maxnames > REMOTE_NODE_DEVICE_NAME_LIST_MAX"
msgstr ""

#: daemon/remote.c:5945 daemon/remote.c:7039
#, fuzzy, c-format
msgid "domain event %d already registered"
msgstr "註冊太多驅動程式"

#: daemon/remote.c:5975 daemon/remote.c:7078
#, fuzzy, c-format
msgid "domain event %d not registered"
msgstr "註冊太多驅動程式"

#: daemon/remote.c:6082
msgid "maxuuids > REMOTE_SECRET_UUID_LIST_MAX"
msgstr ""

#: daemon/remote.c:6814
msgid "nameslen > REMOTE_DOMAIN_SNAPSHOT_LIST_NAMES_MAX"
msgstr ""

#: daemon/remote.c:7034 daemon/remote.c:7072
#, c-format
msgid "unsupported event ID %d"
msgstr ""

#: daemon/remote.c:7199
msgid "maxnames > REMOTE_NWFILTER_NAME_LIST_MAX"
msgstr ""

#: daemon/stream.c:114
msgid "stream had unexpected termination"
msgstr ""

#: daemon/stream.c:116
msgid "stream had I/O failure"
msgstr ""

#: daemon/stream.c:474
msgid "stream aborted at client request"
msgstr ""

#: daemon/stream.c:477
#, c-format
msgid "stream aborted with unexpected status %d"
msgstr ""

#: src/conf/cpu_conf.c:123
msgid "XML does not contain expected 'cpu' element"
msgstr ""

#: src/conf/cpu_conf.c:136
msgid ""
"'arch' element element cannot be used inside 'cpu' element with 'match' "
"attribute'"
msgstr ""

#: src/conf/cpu_conf.c:160
msgid "Invalid match attribute for CPU specification"
msgstr ""

#: src/conf/cpu_conf.c:170
msgid "Missing CPU architecture"
msgstr ""

#: src/conf/cpu_conf.c:178 src/cpu/cpu_x86.c:949
msgid "Missing CPU model name"
msgstr ""

#: src/conf/cpu_conf.c:185
msgid "CPU vendor specified without CPU model"
msgstr ""

#: src/conf/cpu_conf.c:197
msgid "Missing 'sockets' attribute in CPU topology"
msgstr ""

#: src/conf/cpu_conf.c:206
msgid "Missing 'cores' attribute in CPU topology"
msgstr ""

#: src/conf/cpu_conf.c:215
msgid "Missing 'threads' attribute in CPU topology"
msgstr ""

#: src/conf/cpu_conf.c:222
msgid "Invalid CPU topology"
msgstr ""

#: src/conf/cpu_conf.c:234 src/conf/cpu_conf.c:343
msgid "Non-empty feature list specified without CPU model"
msgstr ""

#: src/conf/cpu_conf.c:261
#, fuzzy
msgid "Invalid CPU feature policy"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/conf/cpu_conf.c:271
msgid "Invalid CPU feature name"
msgstr ""

#: src/conf/cpu_conf.c:278 src/conf/cpu_conf.c:425
#, c-format
msgid "CPU feature `%s' specified more than once"
msgstr ""

#: src/conf/cpu_conf.c:352
#, c-format
msgid "Unexpected CPU match policy %d"
msgstr ""

#: src/conf/cpu_conf.c:386 src/cpu/cpu_x86.c:669
msgid "Missing CPU feature name"
msgstr ""

#: src/conf/cpu_conf.c:396
#, fuzzy, c-format
msgid "Unexpected CPU feature policy %d"
msgstr "無預期的數值節點"

#: src/conf/domain_conf.c:1360
#, fuzzy, c-format
msgid "unknown address type '%d'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:1387
msgid "Cannot parse <address> 'domain' attribute"
msgstr ""

#: src/conf/domain_conf.c:1394 src/conf/domain_conf.c:1452
#: src/conf/domain_conf.c:1504
msgid "Cannot parse <address> 'bus' attribute"
msgstr ""

#: src/conf/domain_conf.c:1401 src/conf/domain_conf.c:1553
msgid "Cannot parse <address> 'slot' attribute"
msgstr ""

#: src/conf/domain_conf.c:1408
msgid "Cannot parse <address> 'function' attribute"
msgstr ""

#: src/conf/domain_conf.c:1414
msgid "Insufficient specification for PCI address"
msgstr ""

#: src/conf/domain_conf.c:1445 src/conf/domain_conf.c:1497
#: src/conf/domain_conf.c:1546
msgid "Cannot parse <address> 'controller' attribute"
msgstr ""

#: src/conf/domain_conf.c:1459
msgid "Cannot parse <address> 'unit' attribute"
msgstr ""

#: src/conf/domain_conf.c:1465
msgid "Insufficient specification for drive address"
msgstr ""

#: src/conf/domain_conf.c:1511
msgid "Cannot parse <address> 'port' attribute"
msgstr ""

#: src/conf/domain_conf.c:1517
msgid "Insufficient specification for virtio serial address"
msgstr ""

#: src/conf/domain_conf.c:1607
#, fuzzy, c-format
msgid "unknown address type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:1612
msgid "No type specified for device address"
msgstr ""

#: src/conf/domain_conf.c:1641
msgid "Unknown device address type"
msgstr ""

#: src/conf/domain_conf.c:1666
#, fuzzy
msgid "missing boot order attribute"
msgstr "找不到區域名稱的資訊"

#: src/conf/domain_conf.c:1671
#, c-format
msgid "incorrect boot order '%s', expecting positive integer"
msgstr ""

#: src/conf/domain_conf.c:1680
msgid "boot orders have to be contiguous and starting from 1"
msgstr ""

#: src/conf/domain_conf.c:1684
#, c-format
msgid "boot order %d used for more than one device"
msgstr ""

#: src/conf/domain_conf.c:1814
#, fuzzy, c-format
msgid "unknown disk type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:1841
#, fuzzy
msgid "missing protocol type"
msgstr "找不到 \""

#: src/conf/domain_conf.c:1847
#, fuzzy, c-format
msgid "unknown protocol type '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:1854
#, fuzzy
msgid "missing name for disk source"
msgstr "找不到裝置的目標資訊"

#: src/conf/domain_conf.c:1872
#, fuzzy
msgid "missing name for host"
msgstr "找不到裝置的來源資訊"

#: src/conf/domain_conf.c:1878
#, fuzzy
msgid "missing port for host"
msgstr "找不到裝置的來源資訊"

#: src/conf/domain_conf.c:1887 src/conf/domain_conf.c:6866
#, fuzzy, c-format
msgid "unexpected disk type %s"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:1946
#, fuzzy, c-format
msgid "unknown disk device '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:1972
#, c-format
msgid "Invalid floppy device name: %s"
msgstr ""

#: src/conf/domain_conf.c:1987
#, c-format
msgid "Invalid harddisk device name: %s"
msgstr ""

#: src/conf/domain_conf.c:1994
#, fuzzy, c-format
msgid "unknown disk bus type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:2019
#, c-format
msgid "Invalid bus type '%s' for floppy disk"
msgstr ""

#: src/conf/domain_conf.c:2025
#, c-format
msgid "Invalid bus type '%s' for disk"
msgstr ""

#: src/conf/domain_conf.c:2032
#, fuzzy, c-format
msgid "unknown disk cache mode '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:2039
#, fuzzy, c-format
msgid "unknown disk error policy '%s'"
msgstr "收到未知的 HTTP 錯誤碼 %d"

#: src/conf/domain_conf.c:2047
#, fuzzy, c-format
msgid "unknown disk io mode '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:2056 src/conf/domain_conf.c:2622
#: src/conf/domain_conf.c:4498
#, c-format
msgid "Unable to parse devaddr parameter '%s'"
msgstr ""

#: src/conf/domain_conf.c:2151
#, fuzzy, c-format
msgid "Unknown controller type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:2160
#, c-format
msgid "Cannot parse controller index %s"
msgstr ""

#: src/conf/domain_conf.c:2169
#, fuzzy, c-format
msgid "Unknown model type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:2187
#, fuzzy, c-format
msgid "Invalid ports: %s"
msgstr "無效的參數，於 %s"

#: src/conf/domain_conf.c:2202
#, fuzzy, c-format
msgid "Invalid vectors: %s"
msgstr "無效的參數，於 %s"

#: src/conf/domain_conf.c:2220
msgid "Controllers must use the 'pci' address type"
msgstr ""

#: src/conf/domain_conf.c:2259
#, fuzzy, c-format
msgid "unknown filesystem type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:2270
#, fuzzy, c-format
msgid "unknown accessmode '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:2379
msgid "cannot parse value of managerid parameter"
msgstr ""

#: src/conf/domain_conf.c:2384
msgid "value of managerid out of range"
msgstr ""

#: src/conf/domain_conf.c:2391
msgid "cannot parse value of typeid parameter"
msgstr ""

#: src/conf/domain_conf.c:2396
msgid "value for typeid out of range"
msgstr ""

#: src/conf/domain_conf.c:2403
msgid "cannot parse value of typeidversion parameter"
msgstr ""

#: src/conf/domain_conf.c:2408
msgid "value of typeidversion out of range"
msgstr ""

#: src/conf/domain_conf.c:2417
msgid "cannot parse instanceid parameter as a uuid"
msgstr ""

#: src/conf/domain_conf.c:2422
msgid "cannot generate a random uuid for instanceid"
msgstr ""

#: src/conf/domain_conf.c:2430
msgid "a parameter is missing for 802.1Qbg description"
msgstr ""

#: src/conf/domain_conf.c:2442
msgid "profileid parameter too long"
msgstr ""

#: src/conf/domain_conf.c:2446
msgid "profileid parameter is missing for 802.1Qbh descripion"
msgstr ""

#: src/conf/domain_conf.c:2455
#, fuzzy
msgid "unknown virtualport type"
msgstr "未知的作業系統類型"

#: src/conf/domain_conf.c:2522
#, fuzzy, c-format
msgid "unknown interface type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:2610 src/qemu/qemu_command.c:5116
#, c-format
msgid "unable to parse mac address '%s'"
msgstr ""

#: src/conf/domain_conf.c:2637
#, fuzzy
msgid "Network interfaces must use 'pci' address type"
msgstr "網路名稱"

#: src/conf/domain_conf.c:2645
msgid ""
"No <source> 'network' attribute specified with <interface type='network'/>"
msgstr ""

#: src/conf/domain_conf.c:2671
msgid ""
"No <source> 'bridge' attribute specified with <interface type='bridge'/>"
msgstr ""

#: src/conf/domain_conf.c:2691
msgid "No <source> 'port' attribute specified with socket interface"
msgstr ""

#: src/conf/domain_conf.c:2696
msgid "Cannot parse <source> 'port' attribute with socket interface"
msgstr ""

#: src/conf/domain_conf.c:2704
msgid "No <source> 'address' attribute specified with socket interface"
msgstr ""

#: src/conf/domain_conf.c:2716
msgid ""
"No <source> 'name' attribute specified with <interface type='internal'/>"
msgstr ""

#: src/conf/domain_conf.c:2726
msgid "No <source> 'dev' attribute specified with <interface type='direct'/>"
msgstr ""

#: src/conf/domain_conf.c:2734
#, fuzzy
msgid "Unkown mode has been specified"
msgstr "區域 %s 已經取消定義\n"

#: src/conf/domain_conf.c:2773
msgid "Model name contains invalid characters"
msgstr ""

#: src/conf/domain_conf.c:2787
#, fuzzy, c-format
msgid "Unknown interface <driver name='%s'> has been specified"
msgstr "區域 %s 已經取消定義\n"

#: src/conf/domain_conf.c:2799
#, fuzzy, c-format
msgid "Unknown interface <driver txmode='%s'> has been specified"
msgstr "區域 %s 已經取消定義\n"

#: src/conf/domain_conf.c:2829
msgid "sndbuf must be a positive integer"
msgstr ""

#: src/conf/domain_conf.c:2869
#, c-format
msgid "target type must be specified for %s device"
msgstr ""

#: src/conf/domain_conf.c:2949
msgid "guestfwd channel does not define a target address"
msgstr ""

#: src/conf/domain_conf.c:2964
msgid "guestfwd channel only supports IPv4 addresses"
msgstr ""

#: src/conf/domain_conf.c:2971
msgid "guestfwd channel does not define a target port"
msgstr ""

#: src/conf/domain_conf.c:2978 src/conf/domain_conf.c:3002
#: src/conf/storage_conf.c:431
#, fuzzy, c-format
msgid "Invalid port number: %s"
msgstr "無效的參數，於 %s"

#: src/conf/domain_conf.c:3071
#, fuzzy, c-format
msgid "Unknown source mode '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:3104 src/conf/domain_conf.c:3187
#, fuzzy
msgid "Missing source path attribute for char device"
msgstr "找不到裝置的來源資訊"

#: src/conf/domain_conf.c:3122 src/conf/domain_conf.c:3139
#, fuzzy
msgid "Missing source host attribute for char device"
msgstr "找不到裝置的來源資訊"

#: src/conf/domain_conf.c:3127 src/conf/domain_conf.c:3144
#: src/conf/domain_conf.c:3169
#, fuzzy
msgid "Missing source service attribute for char device"
msgstr "找不到裝置的來源資訊"

#: src/conf/domain_conf.c:3160
#, fuzzy, c-format
msgid "Unknown protocol '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:3273 src/conf/domain_conf.c:3413
#, fuzzy, c-format
msgid "unknown type presented to host for character device: %s"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:3281
#, fuzzy, c-format
msgid "unknown character device type: %s"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:3306
msgid "spicevmc device type only supports virtio"
msgstr ""

#: src/conf/domain_conf.c:3346
#, fuzzy
msgid "missing smartcard device mode"
msgstr "找不到裝置的來源資訊"

#: src/conf/domain_conf.c:3351
#, fuzzy, c-format
msgid "unknown smartcard device mode: %s"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:3368 src/conf/domain_conf.c:3397
msgid "host-certificates mode needs exactly three certificates"
msgstr ""

#: src/conf/domain_conf.c:3388
#, fuzzy, c-format
msgid "expecting absolute path: %s"
msgstr "預期的是分隔子"

#: src/conf/domain_conf.c:3407
msgid "passthrough mode requires a character device type attribute"
msgstr ""

#: src/conf/domain_conf.c:3431
#, fuzzy
msgid "unknown smartcard mode"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:3440
#, fuzzy
msgid "Controllers must use the 'ccid' address type"
msgstr "網路名稱"

#: src/conf/domain_conf.c:3475
#, fuzzy
msgid "missing input device type"
msgstr "找不到 root 裝置的資訊"

#: src/conf/domain_conf.c:3481
#, fuzzy, c-format
msgid "unknown input device type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:3488
#, fuzzy, c-format
msgid "unknown input bus type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:3496
#, c-format
msgid "ps2 bus does not support %s input device"
msgstr ""

#: src/conf/domain_conf.c:3502 src/conf/domain_conf.c:3509
#, c-format
msgid "unsupported input bus %s"
msgstr ""

#: src/conf/domain_conf.c:3514
#, c-format
msgid "xen bus does not support %s input device"
msgstr ""

#: src/conf/domain_conf.c:3571
#, fuzzy
msgid "missing timer name"
msgstr "區域 ID 或名稱"

#: src/conf/domain_conf.c:3576
#, fuzzy, c-format
msgid "unknown timer name '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:3588
#, c-format
msgid "unknown timer present value '%s'"
msgstr ""

#: src/conf/domain_conf.c:3598
#, fuzzy, c-format
msgid "unknown timer tickpolicy '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:3608
#, fuzzy, c-format
msgid "unknown timer track '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:3618
msgid "invalid timer frequency"
msgstr ""

#: src/conf/domain_conf.c:3627
#, fuzzy, c-format
msgid "unknown timer mode '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:3640
msgid "invalid catchup threshold"
msgstr ""

#: src/conf/domain_conf.c:3649
msgid "invalid catchup slew"
msgstr ""

#: src/conf/domain_conf.c:3658
#, fuzzy
msgid "invalid catchup limit"
msgstr "無效的參數，於 "

#: src/conf/domain_conf.c:3708
#, c-format
msgid "cannot parse password validity time '%s', expect YYYY-MM-DDTHH:MM:SS"
msgstr ""

#: src/conf/domain_conf.c:3742
#, fuzzy
msgid "missing graphics device type"
msgstr "找不到 root 裝置的資訊"

#: src/conf/domain_conf.c:3748
#, fuzzy, c-format
msgid "unknown graphics device type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:3759
#, c-format
msgid "cannot parse vnc port %s"
msgstr ""

#: src/conf/domain_conf.c:3800 src/conf/domain_conf.c:3862
#, fuzzy, c-format
msgid "unknown fullscreen value '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:3818
#, c-format
msgid "cannot parse rdp port %s"
msgstr ""

#: src/conf/domain_conf.c:3880
#, fuzzy, c-format
msgid "cannot parse spice port %s"
msgstr "無法連上 %s"

#: src/conf/domain_conf.c:3893
#, fuzzy, c-format
msgid "cannot parse spice tlsPort %s"
msgstr "無法連上 %s"

#: src/conf/domain_conf.c:3929
msgid "spice channel missing name/mode"
msgstr ""

#: src/conf/domain_conf.c:3937
#, fuzzy, c-format
msgid "unknown spice channel name %s"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:3945
#, fuzzy, c-format
msgid "unknown spice channel mode %s"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:3988
#, fuzzy, c-format
msgid "unknown sound model '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:4024
msgid "watchdog must contain model name"
msgstr ""

#: src/conf/domain_conf.c:4030
#, fuzzy, c-format
msgid "unknown watchdog model '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:4041
#, fuzzy, c-format
msgid "unknown watchdog action '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:4077
msgid "balloon memory must contain model name"
msgstr ""

#: src/conf/domain_conf.c:4082
#, fuzzy, c-format
msgid "unknown memory balloon model '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:4109
msgid "XML does not contain expected 'sysinfo' element"
msgstr ""

#: src/conf/domain_conf.c:4121
#, fuzzy
msgid "sysinfo must contain a type attribute"
msgstr "找不到區域名稱的資訊"

#: src/conf/domain_conf.c:4126
#, fuzzy, c-format
msgid "unknown sysinfo type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:4303
#, fuzzy, c-format
msgid "unknown video model '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:4309
msgid "missing video model and cannot determine default"
msgstr ""

#: src/conf/domain_conf.c:4317
#, c-format
msgid "cannot parse video ram '%s'"
msgstr ""

#: src/conf/domain_conf.c:4327
#, c-format
msgid "cannot parse video heads '%s'"
msgstr ""

#: src/conf/domain_conf.c:4376
#, c-format
msgid "cannot parse vendor id %s"
msgstr ""

#: src/conf/domain_conf.c:4383
msgid "usb vendor needs id"
msgstr ""

#: src/conf/domain_conf.c:4394
#, c-format
msgid "cannot parse product %s"
msgstr ""

#: src/conf/domain_conf.c:4402
msgid "usb product needs id"
msgstr ""

#: src/conf/domain_conf.c:4413
#, c-format
msgid "cannot parse bus %s"
msgstr ""

#: src/conf/domain_conf.c:4420
msgid "usb address needs bus id"
msgstr ""

#: src/conf/domain_conf.c:4429
#, c-format
msgid "cannot parse device %s"
msgstr ""

#: src/conf/domain_conf.c:4437
msgid "usb address needs device id"
msgstr ""

#: src/conf/domain_conf.c:4442
#, fuzzy, c-format
msgid "unknown usb source type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:4452
msgid "vendor cannot be 0."
msgstr ""

#: src/conf/domain_conf.c:4458
#, fuzzy
msgid "missing vendor"
msgstr "找不到 \""

#: src/conf/domain_conf.c:4463
#, fuzzy
msgid "missing product"
msgstr "找不到 \""

#: src/conf/domain_conf.c:4506
#, fuzzy, c-format
msgid "unknown pci source type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/domain_conf.c:4540
#, fuzzy, c-format
msgid "unknown hostdev mode '%s'"
msgstr "未知的主機 %s"

#: src/conf/domain_conf.c:4551
#, fuzzy, c-format
msgid "unknown host device type '%s'"
msgstr "未知的主機 %s"

#: src/conf/domain_conf.c:4556
#, fuzzy
msgid "missing type in hostdev"
msgstr "找不到裝置的目標資訊"

#: src/conf/domain_conf.c:4591
#, fuzzy, c-format
msgid "unknown node %s"
msgstr "未知的主機 %s"

#: src/conf/domain_conf.c:4608
msgid "PCI host devices must use 'pci' address type"
msgstr ""

#: src/conf/domain_conf.c:4640
#, c-format
msgid "unknown lifecycle action %s"
msgstr ""

#: src/conf/domain_conf.c:4663
msgid "missing security type"
msgstr ""

#: src/conf/domain_conf.c:4670
msgid "invalid security type"
msgstr ""

#: src/conf/domain_conf.c:4683
msgid "missing security model"
msgstr ""

#: src/conf/domain_conf.c:4692
msgid "security label is missing"
msgstr ""

#: src/conf/domain_conf.c:4706
msgid "security imagelabel is missing"
msgstr ""

#: src/conf/domain_conf.c:4739 src/conf/domain_conf.c:8875
#: src/conf/nwfilter_conf.c:2061 src/security/virt-aa-helper.c:676
#: src/util/xml.c:700
#, fuzzy
msgid "missing root element"
msgstr "找不到 root 裝置的資訊"

#: src/conf/domain_conf.c:4801
#, fuzzy
msgid "unknown device type"
msgstr "未知的作業系統類型"

#: src/conf/domain_conf.c:5014
#, fuzzy
msgid "unknown virt type"
msgstr "未知的作業系統類型"

#: src/conf/domain_conf.c:5025
#, c-format
msgid "no emulator for domain %s os type %s on architecture %s"
msgstr ""

#: src/conf/domain_conf.c:5052
#, fuzzy
msgid "cannot count boot devices"
msgstr "無法解開執行中 %s hypervisor 的版本\n"

#: src/conf/domain_conf.c:5059
msgid "cannot extract boot device"
msgstr ""

#: src/conf/domain_conf.c:5065
msgid "per-device boot elements cannot be used together with os/boot elements"
msgstr ""

#: src/conf/domain_conf.c:5075
#, fuzzy
msgid "missing boot device"
msgstr "找不到 root 裝置的資訊"

#: src/conf/domain_conf.c:5080
#, fuzzy, c-format
msgid "unknown boot device '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:5133
msgid "vcpu id must be an unsigned integer"
msgstr ""

#: src/conf/domain_conf.c:5137
#, fuzzy
msgid "can't parse vcpupin node"
msgstr "無效的參數，於 %s"

#: src/conf/domain_conf.c:5143
msgid "vcpu id must be less than maxvcpus"
msgstr ""

#: src/conf/domain_conf.c:5166
#, fuzzy
msgid "missing cpuset for vcpupin"
msgstr "找不到裝置的來源資訊"

#: src/conf/domain_conf.c:5209
#, fuzzy
msgid "missing domain type attribute"
msgstr "找不到區域名稱的資訊"

#: src/conf/domain_conf.c:5215
#, fuzzy, c-format
msgid "invalid domain type %s"
msgstr "無效的區域指標，於 %s"

#: src/conf/domain_conf.c:5233 src/conf/network_conf.c:606
#: src/conf/secret_conf.c:164 src/openvz/openvz_conf.c:938
#, fuzzy
msgid "Failed to generate UUID"
msgstr "無法取得網路 UUID"

#: src/conf/domain_conf.c:5240 src/conf/domain_conf.c:6032
#: src/conf/network_conf.c:613 src/conf/nwfilter_conf.c:1927
#: src/conf/secret_conf.c:170 src/conf/storage_conf.c:672
msgid "malformed uuid element"
msgstr ""

#: src/conf/domain_conf.c:5253
msgid "missing memory element"
msgstr ""

#: src/conf/domain_conf.c:5290
msgid "maximum vcpus must be an integer"
msgstr ""

#: src/conf/domain_conf.c:5298
#, c-format
msgid "invalid maxvcpus %lu"
msgstr ""

#: src/conf/domain_conf.c:5306
msgid "current vcpus must be an integer"
msgstr ""

#: src/conf/domain_conf.c:5314
#, fuzzy, c-format
msgid "invalid current vcpus %lu"
msgstr "無效的參數，於 %s"

#: src/conf/domain_conf.c:5320
#, c-format
msgid "maxvcpus must not be less than current vcpus (%d < %lu)"
msgstr ""

#: src/conf/domain_conf.c:5348
#, fuzzy
msgid "cannot extract vcpupin nodes"
msgstr "無法解開執行中 %s hypervisor 的版本\n"

#: src/conf/domain_conf.c:5357
msgid "vcpupin nodes must be less than maxvcpus"
msgstr ""

#: src/conf/domain_conf.c:5372
msgid "duplicate vcpupin for same vcpu"
msgstr ""

#: src/conf/domain_conf.c:5389
#, fuzzy, c-format
msgid "unexpected feature %s"
msgstr "無預期的資料「%s」"

#: src/conf/domain_conf.c:5418
#, fuzzy, c-format
msgid "unknown clock offset '%s'"
msgstr "未知的主機 %s"

#: src/conf/domain_conf.c:5436
msgid "missing 'timezone' attribute for clock with offset='timezone'"
msgstr ""

#: src/conf/domain_conf.c:5444
#, fuzzy
msgid "failed to parse timers"
msgstr "無法開啟檔案"

#: src/conf/domain_conf.c:5473
#, fuzzy
msgid "no OS type"
msgstr "未知的作業系統類型"

#: src/conf/domain_conf.c:5501
#, c-format
msgid "os type '%s' & arch '%s' combination is not supported"
msgstr ""

#: src/conf/domain_conf.c:5509 src/xenxs/xen_xm.c:239
#, c-format
msgid "no supported architecture for os type '%s'"
msgstr ""

#: src/conf/domain_conf.c:5573
#, fuzzy
msgid "cannot extract disk devices"
msgstr "無法解開執行中 %s hypervisor 的版本\n"

#: src/conf/domain_conf.c:5593
msgid "cannot extract controller devices"
msgstr ""

#: src/conf/domain_conf.c:5611
msgid "cannot extract filesystem devices"
msgstr ""

#: src/conf/domain_conf.c:5629
#, fuzzy
msgid "cannot extract network devices"
msgstr "網路名稱"

#: src/conf/domain_conf.c:5651
#, fuzzy
msgid "cannot extract smartcard devices"
msgstr "無法解開執行中 %s hypervisor 的版本\n"

#: src/conf/domain_conf.c:5671
msgid "cannot extract parallel devices"
msgstr ""

#: src/conf/domain_conf.c:5699
msgid "cannot extract serial devices"
msgstr ""

#: src/conf/domain_conf.c:5757
msgid "cannot extract channel devices"
msgstr ""

#: src/conf/domain_conf.c:5798
#, fuzzy
msgid "cannot extract input devices"
msgstr "無法解開執行中 %s hypervisor 的版本\n"

#: src/conf/domain_conf.c:5832
#, fuzzy
msgid "cannot extract graphics devices"
msgstr "無法解開執行中 %s hypervisor 的版本\n"

#: src/conf/domain_conf.c:5875
#, fuzzy
msgid "cannot extract sound devices"
msgstr "無法解開執行中 %s hypervisor 的版本\n"

#: src/conf/domain_conf.c:5893
msgid "cannot extract video devices"
msgstr ""

#: src/conf/domain_conf.c:5917
msgid "cannot determine default video type"
msgstr ""

#: src/conf/domain_conf.c:5933
msgid "cannot extract host devices"
msgstr ""

#: src/conf/domain_conf.c:5953
msgid "cannot extract watchdog devices"
msgstr ""

#: src/conf/domain_conf.c:5958
msgid "only a single watchdog device is supported"
msgstr ""

#: src/conf/domain_conf.c:5975
msgid "cannot extract memory balloon devices"
msgstr ""

#: src/conf/domain_conf.c:5980
msgid "only a single memory balloon device is supported"
msgstr ""

#: src/conf/domain_conf.c:6039
msgid "UUID mismatch between <uuid> and <sysinfo>"
msgstr ""

#: src/conf/domain_conf.c:6051
#, fuzzy, c-format
msgid "unknown smbios mode '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:6107
#, fuzzy
msgid "no domain config"
msgstr "節點的區域清單"

#: src/conf/domain_conf.c:6121
#, fuzzy
msgid "missing domain state"
msgstr "區域狀態"

#: src/conf/domain_conf.c:6126
#, fuzzy, c-format
msgid "invalid domain state '%s'"
msgstr "無效的區域指標，於 %s"

#: src/conf/domain_conf.c:6134
#, fuzzy
msgid "invalid pid"
msgstr "無效的參數，於 %s"

#: src/conf/domain_conf.c:6194 src/conf/domain_conf.c:6223
#: src/conf/interface_conf.c:835 src/conf/network_conf.c:732
#: src/conf/node_device_conf.c:1209 src/conf/secret_conf.c:116
#: src/security/virt-aa-helper.c:681
msgid "incorrect root element"
msgstr ""

#: src/conf/domain_conf.c:6628
msgid "topology cpuset syntax error"
msgstr ""

#: src/conf/domain_conf.c:6762
#, fuzzy, c-format
msgid "unexpected lifecycle type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:6786
#, fuzzy, c-format
msgid "unexpected disk type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:6791
#, fuzzy, c-format
msgid "unexpected disk device %d"
msgstr "無預期的 dict 節點"

#: src/conf/domain_conf.c:6796
#, fuzzy, c-format
msgid "unexpected disk bus %d"
msgstr "無預期的 dict 節點"

#: src/conf/domain_conf.c:6801
#, fuzzy, c-format
msgid "unexpected disk cache mode %d"
msgstr "無預期的 dict 節點"

#: src/conf/domain_conf.c:6806
#, fuzzy, c-format
msgid "unexpected disk io mode %d"
msgstr "無預期的 dict 節點"

#: src/conf/domain_conf.c:6906
#, fuzzy, c-format
msgid "unexpected controller type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:6915
#, fuzzy, c-format
msgid "unexpected model type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:6966
#, fuzzy, c-format
msgid "unexpected filesystem type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:6972
#, fuzzy, c-format
msgid "unexpected accessmode %d"
msgstr "無預期的數值節點"

#: src/conf/domain_conf.c:7028 src/conf/domain_conf.c:7699
#, fuzzy, c-format
msgid "unexpected net type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:7160
#, fuzzy, c-format
msgid "unexpected char type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:7261
#, fuzzy, c-format
msgid "unexpected char device type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:7280
msgid "Could not format channel target type"
msgstr ""

#: src/conf/domain_conf.c:7290
msgid "Unable to format guestfwd port"
msgstr ""

#: src/conf/domain_conf.c:7351 src/conf/domain_conf.c:7383
#: src/qemu/qemu_command.c:3650
#, fuzzy, c-format
msgid "unexpected smartcard type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:7401 src/xenxs/xen_sxpr.c:1912
#, fuzzy, c-format
msgid "unexpected sound model %d"
msgstr "無預期的 dict 節點"

#: src/conf/domain_conf.c:7430
#, fuzzy, c-format
msgid "unexpected memballoon model %d"
msgstr "無預期的數值節點"

#: src/conf/domain_conf.c:7473
#, fuzzy, c-format
msgid "unexpected watchdog model %d"
msgstr "無預期的 dict 節點"

#: src/conf/domain_conf.c:7479
#, fuzzy, c-format
msgid "unexpected watchdog action %d"
msgstr "無預期的 dict 節點"

#: src/conf/domain_conf.c:7520
#, fuzzy, c-format
msgid "unexpected video model %d"
msgstr "無預期的數值節點"

#: src/conf/domain_conf.c:7557 src/xenxs/xen_sxpr.c:1940
#, fuzzy, c-format
msgid "unexpected input type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:7562
#, fuzzy, c-format
msgid "unexpected input bus type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:7590
#, fuzzy, c-format
msgid "unexpected timer name %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:7606
#, fuzzy, c-format
msgid "unexpected timer tickpolicy %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:7620
#, fuzzy, c-format
msgid "unexpected timer track %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:7638
#, fuzzy, c-format
msgid "unexpected timer mode %d"
msgstr "無預期的 dict 節點"

#: src/conf/domain_conf.c:7840
#, fuzzy, c-format
msgid "unexpected hostdev mode %d"
msgstr "無預期的 dict 節點"

#: src/conf/domain_conf.c:7847
#, fuzzy, c-format
msgid "unexpected hostdev type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:7901
#, fuzzy, c-format
msgid "unexpected domain type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:8002
#, fuzzy
msgid "failed to format cpuset for vcpupin"
msgstr "無法開啟要讀取的 %s"

#: src/conf/domain_conf.c:8067
#, fuzzy, c-format
msgid "unexpected boot device type %d"
msgstr "無預期的 mime 類型"

#: src/conf/domain_conf.c:8088
#, fuzzy, c-format
msgid "unexpected smbios mode %d"
msgstr "無預期的 dict 節點"

#: src/conf/domain_conf.c:8104
#, fuzzy, c-format
msgid "unexpected feature %d"
msgstr "無預期的數值節點"

#: src/conf/domain_conf.c:8335 src/conf/network_conf.c:914
#: src/conf/nwfilter_conf.c:2142 src/util/dnsmasq.c:135
#, c-format
msgid "cannot create config directory '%s'"
msgstr ""

#: src/conf/domain_conf.c:8344 src/conf/network_conf.c:923
#: src/conf/nwfilter_conf.c:2151
#, fuzzy, c-format
msgid "cannot create config file '%s'"
msgstr "無法讀取設定檔 %s"

#: src/conf/domain_conf.c:8352 src/conf/network_conf.c:931
#: src/conf/nwfilter_conf.c:2159 src/util/dnsmasq.c:215
#, fuzzy, c-format
msgid "cannot write config file '%s'"
msgstr "無法寫入設定檔：%s"

#: src/conf/domain_conf.c:8359 src/conf/network_conf.c:938
#: src/conf/nwfilter_conf.c:2166
#, fuzzy, c-format
msgid "cannot save config file '%s'"
msgstr "無法解析設定檔 %s"

#: src/conf/domain_conf.c:8487
#, c-format
msgid "unexpected domain %s already exists"
msgstr ""

#: src/conf/domain_conf.c:8526 src/conf/network_conf.c:1036
#: src/conf/nwfilter_conf.c:2481 src/conf/storage_conf.c:1470
#, fuzzy, c-format
msgid "Failed to open dir '%s'"
msgstr "無法暫停區域 %s"

#: src/conf/domain_conf.c:8588
#, c-format
msgid "cannot remove config %s"
msgstr ""

#: src/conf/domain_conf.c:8694 src/xen/xm_internal.c:1093
#, c-format
msgid "domain '%s' is already defined with uuid %s"
msgstr ""

#: src/conf/domain_conf.c:8703
#, fuzzy, c-format
msgid "domain is already active as '%s'"
msgstr "區域已經啟動"

#: src/conf/domain_conf.c:8717
#, c-format
msgid "domain '%s' already exists with uuid %s"
msgstr ""

#: src/conf/domain_conf.c:8869
#, fuzzy
msgid "failed to parse snapshot xml document"
msgstr "無法解析 Xend 的區域資訊"

#: src/conf/domain_conf.c:8880
#, fuzzy
msgid "domainsnapshot"
msgstr "區域狀態"

#: src/conf/domain_conf.c:8914
msgid "missing creationTime from existing snapshot"
msgstr ""

#: src/conf/domain_conf.c:8926
msgid "missing state from existing snapshot"
msgstr ""

#: src/conf/domain_conf.c:8932
#, c-format
msgid "Invalid state '%s' in domain snapshot XML"
msgstr ""

#: src/conf/domain_conf.c:8939
msgid "Could not find 'active' element"
msgstr ""

#: src/conf/domain_conf.c:9028
#, c-format
msgid "unexpected domain snapshot %s already exists"
msgstr ""

#: src/conf/domain_conf.c:9283
#, fuzzy, c-format
msgid "unknown disk format '%s' for %s"
msgstr "未知的指令：「%s」"

#: src/conf/domain_conf.c:9292 src/qemu/qemu_driver.c:5148
#, c-format
msgid "no disk format for %s and probing is disabled"
msgstr ""

#: src/conf/domain_conf.c:9310
#, c-format
msgid "backing store for %s is self-referential"
msgstr ""

#: src/conf/domain_conf.c:9323
#, fuzzy, c-format
msgid "unable to open disk path %s"
msgstr "無法開啟要讀取的 %s"

#: src/conf/domain_conf.c:9336
#, fuzzy, c-format
msgid "could not close file %s"
msgstr "無法連上 %s"

#: src/conf/domain_event.c:153 src/conf/domain_event.c:198
msgid "could not find event callback for removal"
msgstr ""

#: src/conf/domain_event.c:257 src/conf/domain_event.c:276
msgid "could not find event callback for deletion"
msgstr ""

#: src/conf/domain_event.c:366
msgid "event callback already tracked"
msgstr ""

#: src/conf/domain_event.c:814
msgid "event queue is empty, nothing to pop"
msgstr ""

#: src/conf/interface_conf.c:126
msgid "interface has no name"
msgstr ""

#: src/conf/interface_conf.c:142
msgid "interface mtu value is improper"
msgstr ""

#: src/conf/interface_conf.c:166
#, c-format
msgid "unknown interface startmode %s"
msgstr ""

#: src/conf/interface_conf.c:198
#, fuzzy, c-format
msgid "unknown bonding mode %s"
msgstr "未知的指令：「%s」"

#: src/conf/interface_conf.c:219
#, c-format
msgid "unknown mii bonding carrier %s"
msgstr ""

#: src/conf/interface_conf.c:242
#, c-format
msgid "unknown arp bonding validate %s"
msgstr ""

#: src/conf/interface_conf.c:268
#, c-format
msgid "unknown dhcp peerdns value %s"
msgstr ""

#: src/conf/interface_conf.c:294
msgid "Invalid ip address prefix value"
msgstr ""

#: src/conf/interface_conf.c:451
msgid "protocol misses the family attribute"
msgstr ""

#: src/conf/interface_conf.c:470
#, c-format
msgid "unsupported protocol family '%s'"
msgstr ""

#: src/conf/interface_conf.c:499
msgid "bridge interfaces"
msgstr ""

#: src/conf/interface_conf.c:541
#, fuzzy
msgid "bond has no interfaces"
msgstr "網路名稱"

#: src/conf/interface_conf.c:589
msgid "bond interface miimon freq missing or invalid"
msgstr ""

#: src/conf/interface_conf.c:597
msgid "bond interface miimon downdelay invalid"
msgstr ""

#: src/conf/interface_conf.c:606
msgid "bond interface miimon updelay invalid"
msgstr ""

#: src/conf/interface_conf.c:625
msgid "bond interface arpmon interval missing or invalid"
msgstr ""

#: src/conf/interface_conf.c:634
msgid "bond interface arpmon target missing"
msgstr ""

#: src/conf/interface_conf.c:655
msgid "vlan interface misses the tag attribute"
msgstr ""

#: src/conf/interface_conf.c:663
msgid "vlan interface misses name attribute"
msgstr ""

#: src/conf/interface_conf.c:680
msgid "interface misses the type attribute"
msgstr ""

#: src/conf/interface_conf.c:686
#, fuzzy, c-format
msgid "unknown interface type %s"
msgstr "未知的作業系統類型 %s"

#: src/conf/interface_conf.c:707
#, c-format
msgid "interface has unsupported type '%s'"
msgstr ""

#: src/conf/interface_conf.c:744
msgid "bridge interface misses the bridge element"
msgstr ""

#: src/conf/interface_conf.c:756
#, c-format
msgid "bridge interface stp should be on or off got %s"
msgstr ""

#: src/conf/interface_conf.c:786
msgid "bond interface misses the bond element"
msgstr ""

#: src/conf/interface_conf.c:807
msgid "vlan interface misses the vlan element"
msgstr ""

#: src/conf/interface_conf.c:941
msgid "bond arp monitoring has no target"
msgstr ""

#: src/conf/interface_conf.c:969
msgid "vlan misses the tag name"
msgstr ""

#: src/conf/interface_conf.c:1051
msgid "virInterfaceDefFormat unknown startmode"
msgstr ""

#: src/conf/interface_conf.c:1065
msgid "virInterfaceDefFormat NULL def"
msgstr ""

#: src/conf/interface_conf.c:1071
msgid "virInterfaceDefFormat missing interface name"
msgstr ""

#: src/conf/interface_conf.c:1077
#, fuzzy, c-format
msgid "unexpected interface type %d"
msgstr "無預期的 mime 類型"

#: src/conf/network_conf.c:337
#, fuzzy, c-format
msgid "Invalid dhcp range '%s' to '%s' in network '%s'"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/conf/network_conf.c:363
#, fuzzy, c-format
msgid "Cannot parse MAC address '%s' in network '%s'"
msgstr "無效的參數，於 %s"

#: src/conf/network_conf.c:370
#, fuzzy, c-format
msgid "Cannot use name address '%s' in network '%s'"
msgstr "無效的參數，於 %s"

#: src/conf/network_conf.c:379
#, c-format
msgid "Static host definition in network '%s' must have mac or name attribute"
msgstr ""

#: src/conf/network_conf.c:387
#, c-format
msgid "Missing IP address in static host definition for network '%s'"
msgstr ""

#: src/conf/network_conf.c:469
#, c-format
msgid "Bad address '%s' in definition of network '%s'"
msgstr ""

#: src/conf/network_conf.c:481
#, c-format
msgid "no family specified for non-IPv4 address address '%s' in network '%s'"
msgstr ""

#: src/conf/network_conf.c:488
#, c-format
msgid "family 'ipv4' specified for non-IPv4 address '%s' in network '%s'"
msgstr ""

#: src/conf/network_conf.c:495
#, c-format
msgid "family 'ipv6' specified for non-IPv6 address '%s' in network '%s'"
msgstr ""

#: src/conf/network_conf.c:501
#, c-format
msgid "Unrecognized family '%s' in definition of network '%s'"
msgstr ""

#: src/conf/network_conf.c:511
#, c-format
msgid "netmask specified without address in network '%s'"
msgstr ""

#: src/conf/network_conf.c:518
#, c-format
msgid "netmask not supported for address '%s' in network '%s' (IPv4 only)"
msgstr ""

#: src/conf/network_conf.c:526
#, c-format
msgid "network '%s' cannot have both prefix='%u' and a netmask"
msgstr ""

#: src/conf/network_conf.c:536
#, c-format
msgid ""
"network '%s' has invalid netmask '%s' for address '%s' (both must be IPv4)"
msgstr ""

#: src/conf/network_conf.c:635
#, c-format
msgid "Invalid bridge mac address '%s' in network '%s'"
msgstr ""

#: src/conf/network_conf.c:668
msgid "Forwarding requested, but no IP address provided"
msgstr ""

#: src/conf/network_conf.c:675
#, fuzzy, c-format
msgid "unknown forwarding type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/network_conf.c:995
#, c-format
msgid "Network config filename '%s' does not match network name '%s'"
msgstr ""

#: src/conf/network_conf.c:1083 src/util/dnsmasq.c:230
#, fuzzy, c-format
msgid "cannot remove config file '%s'"
msgstr "無法讀取設定檔 %s"

#: src/conf/network_conf.c:1152
#, c-format
msgid "Bridge generation exceeded max id %d"
msgstr ""

#: src/conf/network_conf.c:1170
#, c-format
msgid "bridge name '%s' already in use."
msgstr ""

#: src/conf/network_conf.c:1225
#, fuzzy, c-format
msgid "network '%s' is already defined with uuid %s"
msgstr "網路 %s 已經存在"

#: src/conf/network_conf.c:1234
#, fuzzy, c-format
msgid "network is already active as '%s'"
msgstr "區域已經啟動"

#: src/conf/network_conf.c:1248
#, c-format
msgid "network '%s' already exists with uuid %s"
msgstr ""

#: src/conf/node_device_conf.c:561
#, c-format
msgid "no block device path supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:574
#, c-format
msgid "error parsing storage capabilities for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:584
#, c-format
msgid "missing storage capability type for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:606
#, c-format
msgid "no removable media size supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:607
#, c-format
msgid "invalid removable media size supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:617
#, c-format
msgid "unknown storage capability type '%s' for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:629
#, c-format
msgid "no size supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:630
#, c-format
msgid "invalid size supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:656 src/conf/node_device_conf.c:732
#, c-format
msgid "no SCSI host ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:657 src/conf/node_device_conf.c:733
#, c-format
msgid "invalid SCSI host ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:662
#, c-format
msgid "no SCSI bus ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:663
#, c-format
msgid "invalid SCSI bus ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:668
#, c-format
msgid "no SCSI target ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:669
#, c-format
msgid "invalid SCSI target ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:674
#, c-format
msgid "no SCSI LUN ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:675
#, c-format
msgid "invalid SCSI LUN ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:702
#, c-format
msgid "no target name supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:739
#, c-format
msgid "error parsing SCSI host capabilities for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:749
#, c-format
msgid "missing SCSI host capability type for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:771
#, c-format
msgid "no WWNN supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:779
#, c-format
msgid "no WWPN supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:787
#, c-format
msgid "unknown SCSI host capability type '%s' for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:821
#, fuzzy, c-format
msgid "no network interface supplied for '%s'"
msgstr "網路名稱"

#: src/conf/node_device_conf.c:836
#, fuzzy, c-format
msgid "invalid network type supplied for '%s'"
msgstr "無效的網路指標，於 %s"

#: src/conf/node_device_conf.c:863
#, c-format
msgid "no USB interface number supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:864
#, c-format
msgid "invalid USB interface number supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:869
#, c-format
msgid "no USB interface class supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:870
#, c-format
msgid "invalid USB interface class supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:875
#, c-format
msgid "no USB interface subclass supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:876
#, c-format
msgid "invalid USB interface subclass supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:881
#, c-format
msgid "no USB interface protocol supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:882
#, c-format
msgid "invalid USB interface protocol supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:930
#, c-format
msgid "no USB bus number supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:931
#, c-format
msgid "invalid USB bus number supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:936
#, c-format
msgid "no USB device number supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:937
#, c-format
msgid "invalid USB device number supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:942
#, c-format
msgid "no USB vendor ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:943
#, c-format
msgid "invalid USB vendor ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:948
#, c-format
msgid "no USB product ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:949
#, c-format
msgid "invalid USB product ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:975
#, c-format
msgid "no PCI domain ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:976
#, fuzzy, c-format
msgid "invalid PCI domain ID supplied for '%s'"
msgstr "無效的區域指標，於 %s"

#: src/conf/node_device_conf.c:981
#, c-format
msgid "no PCI bus ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:982
#, c-format
msgid "invalid PCI bus ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:987
#, c-format
msgid "no PCI slot ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:988
#, c-format
msgid "invalid PCI slot ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:993
#, c-format
msgid "no PCI function ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:994
#, fuzzy, c-format
msgid "invalid PCI function ID supplied for '%s'"
msgstr "無效的連線指標，於 %s"

#: src/conf/node_device_conf.c:999
#, c-format
msgid "no PCI vendor ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:1000
#, c-format
msgid "invalid PCI vendor ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:1005
#, c-format
msgid "no PCI product ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:1006
#, c-format
msgid "invalid PCI product ID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:1040
#, c-format
msgid "no system UUID supplied for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:1046
#, c-format
msgid "malformed uuid element for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:1080
msgid "missing capability type"
msgstr ""

#: src/conf/node_device_conf.c:1086
#, fuzzy, c-format
msgid "unknown capability type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/node_device_conf.c:1123
#, c-format
msgid "unknown capability type '%d' for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:1175
#, c-format
msgid "no device capabilities for '%s'"
msgstr ""

#: src/conf/node_device_conf.c:1282
msgid "Device is not a fibre channel HBA"
msgstr ""

#: src/conf/node_device_conf.c:1311
#, fuzzy, c-format
msgid "Could not find parent device for '%s'"
msgstr "無法從 %s 建立區域"

#: src/conf/node_device_conf.c:1331
#, c-format
msgid "Parent device %s is not capable of vport operations"
msgstr ""

#: src/conf/nwfilter_conf.c:1545
#, c-format
msgid "%s has illegal value %s"
msgstr ""

#: src/conf/nwfilter_conf.c:1580 src/conf/nwfilter_conf.c:1793
msgid "rule node requires action attribute"
msgstr ""

#: src/conf/nwfilter_conf.c:1800
msgid "unknown rule action attribute value"
msgstr ""

#: src/conf/nwfilter_conf.c:1807
msgid "rule node requires direction attribute"
msgstr ""

#: src/conf/nwfilter_conf.c:1814
msgid "unknown rule direction attribute value"
msgstr ""

#: src/conf/nwfilter_conf.c:1902
#, fuzzy
msgid "filter has no name"
msgstr "無法取得 hypervisor 類型"

#: src/conf/nwfilter_conf.c:1912
#, fuzzy, c-format
msgid "unknown chain suffix '%s'"
msgstr "未知的指令：「%s」"

#: src/conf/nwfilter_conf.c:1921 src/conf/storage_conf.c:666
#: src/storage/storage_backend.c:423
#, fuzzy
msgid "unable to generate uuid"
msgstr "網路名稱或 uuid"

#: src/conf/nwfilter_conf.c:1987 src/util/xml.c:647
#, c-format
msgid "at line %d: %s"
msgstr ""

#: src/conf/nwfilter_conf.c:2004
#, fuzzy
msgid "unknown root element for nw filter"
msgstr "未知的作業系統類型 %s"

#: src/conf/nwfilter_conf.c:2054 src/security/virt-aa-helper.c:671
#: src/util/xml.c:715
#, fuzzy
msgid "failed to parse xml document"
msgstr "無法存入內容"

#: src/conf/nwfilter_conf.c:2370
#, c-format
msgid "filter with same UUID but different name ('%s') already exists"
msgstr ""

#: src/conf/nwfilter_conf.c:2381
msgid "filter would introduce a loop"
msgstr ""

#: src/conf/nwfilter_conf.c:2446
#, c-format
msgid "network filter config filename '%s' does not match name '%s'"
msgstr ""

#: src/conf/nwfilter_conf.c:2499
#, c-format
msgid "config filename '%s/%s' is too long"
msgstr ""

#: src/conf/nwfilter_conf.c:2530 src/conf/storage_conf.c:1527
#, c-format
msgid "cannot create config directory %s"
msgstr ""

#: src/conf/nwfilter_conf.c:2538 src/conf/storage_conf.c:1535
msgid "cannot construct config file path"
msgstr ""

#: src/conf/nwfilter_conf.c:2549 src/conf/storage_conf.c:1560
#, fuzzy
msgid "failed to generate XML"
msgstr "無法讀取插槽 %d\n"

#: src/conf/nwfilter_conf.c:2557 src/conf/storage_conf.c:1568
#, fuzzy, c-format
msgid "cannot create config file %s"
msgstr "無法讀取設定檔 %s"

#: src/conf/nwfilter_conf.c:2565 src/conf/storage_conf.c:1576
#, fuzzy, c-format
msgid "cannot write config file %s"
msgstr "無法寫入設定檔：%s"

#: src/conf/nwfilter_conf.c:2572 src/conf/storage_conf.c:1583
#, fuzzy, c-format
msgid "cannot save config file %s"
msgstr "無法解析設定檔 %s"

#: src/conf/nwfilter_conf.c:2593 src/conf/storage_conf.c:1601
#, fuzzy, c-format
msgid "no config file for %s"
msgstr "設定檔語法錯誤：%s"

#: src/conf/nwfilter_conf.c:2599 src/conf/storage_conf.c:1607
#, c-format
msgid "cannot remove config for %s"
msgstr ""

#: src/conf/nwfilter_conf.c:2672
#, c-format
msgid "formatter for %s %s reported error"
msgstr ""

#: src/conf/nwfilter_params.c:177
#, c-format
msgid "Could not put variable '%s' into hashmap"
msgstr ""

#: src/conf/secret_conf.c:56 src/conf/secret_conf.c:99
#: src/conf/secret_conf.c:227 src/conf/secret_conf.c:244
#, fuzzy, c-format
msgid "unexpected secret usage type %d"
msgstr "無預期的 mime 類型"

#: src/conf/secret_conf.c:72
#, fuzzy
msgid "unknown secret usage type"
msgstr "未知的作業系統類型"

#: src/conf/secret_conf.c:78
#, fuzzy, c-format
msgid "unknown secret usage type %s"
msgstr "未知的作業系統類型 %s"

#: src/conf/secret_conf.c:92
msgid "volume usage specified, but volume path is missing"
msgstr ""

#: src/conf/secret_conf.c:140
#, fuzzy
msgid "invalid value of 'ephemeral'"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/conf/secret_conf.c:154
#, fuzzy
msgid "invalid value of 'private'"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/conf/storage_conf.c:226 src/storage/storage_backend.c:1027
#, c-format
msgid "missing backend for pool type %d"
msgstr ""

#: src/conf/storage_conf.c:375
msgid "missing auth host attribute"
msgstr ""

#: src/conf/storage_conf.c:382
msgid "missing auth passwd attribute"
msgstr ""

#: src/conf/storage_conf.c:419
#, fuzzy, c-format
msgid "unknown pool format type %s"
msgstr "未知的作業系統類型 %s"

#: src/conf/storage_conf.c:453
#, fuzzy
msgid "missing storage pool source device path"
msgstr "找不到裝置 %s 的來源資訊"

#: src/conf/storage_conf.c:472
#, fuzzy, c-format
msgid "unknown auth type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/conf/storage_conf.c:511
msgid "bad <source> spec"
msgstr ""

#: src/conf/storage_conf.c:529
msgid "root element was not source"
msgstr ""

#: src/conf/storage_conf.c:580
msgid "malformed octal mode"
msgstr ""

#: src/conf/storage_conf.c:591
msgid "malformed owner element"
msgstr ""

#: src/conf/storage_conf.c:602
msgid "malformed group element"
msgstr ""

#: src/conf/storage_conf.c:634 src/storage/storage_driver.c:451
#: src/test/test_driver.c:3847
#, fuzzy, c-format
msgid "unknown storage pool type %s"
msgstr "未知的作業系統類型 %s"

#: src/conf/storage_conf.c:658
msgid "missing pool source name element"
msgstr ""

#: src/conf/storage_conf.c:682
msgid "missing storage pool source host name"
msgstr ""

#: src/conf/storage_conf.c:690
msgid "missing storage pool source path"
msgstr ""

#: src/conf/storage_conf.c:708
msgid "missing storage pool source adapter name"
msgstr ""

#: src/conf/storage_conf.c:717
#, fuzzy
msgid "missing storage pool source device name"
msgstr "找不到裝置 %s 的來源資訊"

#: src/conf/storage_conf.c:724
msgid "missing storage pool target path"
msgstr ""

#: src/conf/storage_conf.c:754
msgid "unknown root element for storage pool"
msgstr ""

#: src/conf/storage_conf.c:852
#, c-format
msgid "unknown pool format number %d"
msgstr ""

#: src/conf/storage_conf.c:893 src/conf/storage_conf.c:1645
#, fuzzy
msgid "unexpected pool type"
msgstr "無預期的 mime 類型"

#: src/conf/storage_conf.c:990
#, fuzzy, c-format
msgid "unknown size units '%s'"
msgstr "未知的主機 %s"

#: src/conf/storage_conf.c:997
msgid "malformed capacity element"
msgstr ""

#: src/conf/storage_conf.c:1002
msgid "capacity element value too large"
msgstr ""

#: src/conf/storage_conf.c:1033
#, fuzzy
msgid "missing volume name element"
msgstr "找不到區域名稱的資訊"

#: src/conf/storage_conf.c:1044
msgid "missing capacity element"
msgstr ""

#: src/conf/storage_conf.c:1073 src/conf/storage_conf.c:1104
#, fuzzy, c-format
msgid "unknown volume format type %s"
msgstr "未知的作業系統類型 %s"

#: src/conf/storage_conf.c:1134
msgid "unknown root element for storage vol"
msgstr ""

#: src/conf/storage_conf.c:1194
#, c-format
msgid "unknown volume format number %d"
msgstr ""

#: src/conf/storage_conf.c:1427
#, c-format
msgid "Storage pool config filename '%s' does not match pool name '%s'"
msgstr ""

#: src/conf/storage_conf.c:1489
#, c-format
msgid "Config filename '%s/%s' is too long"
msgstr ""

#: src/conf/storage_conf.c:1497
#, c-format
msgid "Autostart link path '%s/%s' is too long"
msgstr ""

#: src/conf/storage_conf.c:1546
msgid "cannot construct autostart link path"
msgstr ""

#: src/conf/storage_conf.c:1696
#, c-format
msgid "pool '%s' is already defined with uuid %s"
msgstr ""

#: src/conf/storage_conf.c:1705
#, fuzzy, c-format
msgid "pool is already active as '%s'"
msgstr "區域已經啟動"

#: src/conf/storage_conf.c:1719
#, c-format
msgid "pool '%s' already exists with uuid %s"
msgstr ""

#: src/conf/storage_encryption_conf.c:92
msgid "unknown volume encryption secret type"
msgstr ""

#: src/conf/storage_encryption_conf.c:98
#, c-format
msgid "unknown volume encryption secret type %s"
msgstr ""

#: src/conf/storage_encryption_conf.c:110
#, c-format
msgid "malformed volume encryption uuid '%s'"
msgstr ""

#: src/conf/storage_encryption_conf.c:117
msgid "missing volume encryption uuid"
msgstr ""

#: src/conf/storage_encryption_conf.c:146
msgid "unknown volume encryption format"
msgstr ""

#: src/conf/storage_encryption_conf.c:152
#, c-format
msgid "unknown volume encryption format type %s"
msgstr ""

#: src/conf/storage_encryption_conf.c:163
msgid "cannot extract volume encryption secrets"
msgstr ""

#: src/conf/storage_encryption_conf.c:194
msgid "unknown root element for volume encryption information"
msgstr ""

#: src/conf/storage_encryption_conf.c:225
#, fuzzy
msgid "unexpected volume encryption secret type"
msgstr "無預期的 mime 類型"

#: src/conf/storage_encryption_conf.c:246
#, fuzzy
msgid "unexpected encryption format"
msgstr "無預期的 dict 節點"

#: src/conf/storage_encryption_conf.c:275
msgid "Cannot open /dev/urandom"
msgstr ""

#: src/conf/storage_encryption_conf.c:286
msgid "Cannot read from /dev/urandom"
msgstr ""

#: src/cpu/cpu.c:52 src/cpu/cpu_map.c:90
msgid "undefined hardware architecture"
msgstr ""

#: src/cpu/cpu.c:95
msgid "no CPU model specified"
msgstr ""

#: src/cpu/cpu.c:123
#, c-format
msgid "cannot compare CPUs of %s architecture"
msgstr ""

#: src/cpu/cpu.c:151 src/cpu/cpu.c:389
msgid "nonzero nmodels doesn't match with NULL models"
msgstr ""

#: src/cpu/cpu.c:157
#, fuzzy
msgid "invalid CPU definition"
msgstr "無效的區域指標，於 "

#: src/cpu/cpu.c:166
#, c-format
msgid "cannot decode CPU data for %s architecture"
msgstr ""

#: src/cpu/cpu.c:197
#, c-format
msgid "cannot encode CPU data for %s architecture"
msgstr ""

#: src/cpu/cpu.c:223
#, c-format
msgid "cannot free CPU data for %s architecture"
msgstr ""

#: src/cpu/cpu.c:244
#, c-format
msgid "cannot get node CPU data for %s architecture"
msgstr ""

#: src/cpu/cpu.c:267
#, c-format
msgid "cannot compute guest CPU data for %s architecture"
msgstr ""

#: src/cpu/cpu.c:301
msgid "nonzero ncpus doesn't match with NULL xmlCPUs"
msgstr ""

#: src/cpu/cpu.c:306 src/cpu/cpu.c:383
msgid "No CPUs given"
msgstr ""

#: src/cpu/cpu.c:378
msgid "nonzero ncpus doesn't match with NULL cpus"
msgstr ""

#: src/cpu/cpu.c:398
#, c-format
msgid "cannot compute baseline CPU of %s architecture"
msgstr ""

#: src/cpu/cpu.c:420
#, c-format
msgid "cannot update guest CPU data for %s architecture"
msgstr ""

#: src/cpu/cpu.c:443
#, c-format
msgid "cannot check guest CPU data for %s architecture"
msgstr ""

#: src/cpu/cpu_generic.c:135
#, fuzzy, c-format
msgid "CPU model '%s' is not support by hypervisor"
msgstr "不支援 hypervisor"

#: src/cpu/cpu_generic.c:158
#, c-format
msgid "CPUs have incompatible architectures: '%s' != '%s'"
msgstr ""

#: src/cpu/cpu_generic.c:165
#, c-format
msgid "CPU models don't match: '%s' != '%s'"
msgstr ""

#: src/cpu/cpu_map.c:96
msgid "no callback provided"
msgstr ""

#: src/cpu/cpu_map.c:102
#, c-format
msgid "cannot parse CPU map file: %s"
msgstr ""

#: src/cpu/cpu_map.c:120
#, c-format
msgid "cannot find CPU map for %s architecture"
msgstr ""

#: src/cpu/cpu_map.c:127
#, c-format
msgid "cannot parse CPU map for %s architecture"
msgstr ""

#: src/cpu/cpu_x86.c:548
msgid "Missing CPU vendor name"
msgstr ""

#: src/cpu/cpu_x86.c:554
#, c-format
msgid "CPU vendor %s already defined"
msgstr ""

#: src/cpu/cpu_x86.c:561
#, fuzzy, c-format
msgid "Missing vendor string for CPU vendor %s"
msgstr "找不到裝置 %s 的來源資訊"

#: src/cpu/cpu_x86.c:566
#, fuzzy, c-format
msgid "Invalid CPU vendor string '%s'"
msgstr "無效的網路指標，於 %s"

#: src/cpu/cpu_x86.c:675
#, c-format
msgid "CPU feature %s already defined"
msgstr ""

#: src/cpu/cpu_x86.c:699
#, c-format
msgid "Invalid cpuid[%d] in %s feature"
msgstr ""

#: src/cpu/cpu_x86.c:812 src/cpu/cpu_x86.c:862
#, fuzzy, c-format
msgid "Unknown CPU model %s"
msgstr "未知的作業系統類型 %s"

#: src/cpu/cpu_x86.c:833 src/cpu/cpu_x86.c:874 src/cpu/cpu_x86.c:1693
#, fuzzy, c-format
msgid "Unknown CPU feature %s"
msgstr "未知的作業系統類型 %s"

#: src/cpu/cpu_x86.c:960
#, c-format
msgid "Missing ancestor's name in CPU model %s"
msgstr ""

#: src/cpu/cpu_x86.c:967
#, c-format
msgid "Ancestor model %s not found for CPU model %s"
msgstr ""

#: src/cpu/cpu_x86.c:985
#, fuzzy, c-format
msgid "Invalid vendor element in CPU model %s"
msgstr "無效的參數，於 %s"

#: src/cpu/cpu_x86.c:992
#, c-format
msgid "Unknown vendor %s referenced by CPU model %s"
msgstr ""

#: src/cpu/cpu_x86.c:1008
#, c-format
msgid "Missing feature name for CPU model %s"
msgstr ""

#: src/cpu/cpu_x86.c:1014
#, c-format
msgid "Feature %s required by CPU model %s not found"
msgstr ""

#: src/cpu/cpu_x86.c:1346
msgid "Cannot find suitable CPU model for given data"
msgstr ""

#: src/cpu/cpu_x86.c:1441
#, fuzzy, c-format
msgid "CPU vendor %s not found"
msgstr "網路名稱或 uuid"

#: src/cpu/cpu_x86.c:1597 src/cpu/cpu_x86.c:1627
#, fuzzy, c-format
msgid "Unknown CPU vendor %s"
msgstr "未知的作業系統類型 %s"

#: src/cpu/cpu_x86.c:1610
#, c-format
msgid "CPU vendor %s of model %s differs from vendor %s"
msgstr ""

#: src/cpu/cpu_x86.c:1632
msgid "CPU vendors do not match"
msgstr ""

#: src/cpu/cpu_x86.c:1644
msgid "CPUs are incompatible"
msgstr ""

#: src/datatypes.c:141 src/datatypes.c:176 src/datatypes.c:308
#: src/datatypes.c:440 src/datatypes.c:577 src/datatypes.c:711
#: src/datatypes.c:851 src/datatypes.c:971 src/datatypes.c:1157
#, fuzzy
msgid "no connection"
msgstr "沒有有效的連線"

#: src/datatypes.c:180 src/datatypes.c:312 src/datatypes.c:444
#: src/datatypes.c:581 src/datatypes.c:715 src/datatypes.c:855
#: src/datatypes.c:1161 src/datatypes.c:1284
#, fuzzy
msgid "missing name"
msgstr "區域 ID 或名稱"

#: src/datatypes.c:184 src/datatypes.c:316 src/datatypes.c:585
#: src/datatypes.c:975 src/datatypes.c:1165
#, fuzzy
msgid "missing uuid"
msgstr "找不到 \""

#: src/datatypes.c:272
#, fuzzy
msgid "bad domain or no connection"
msgstr "唯讀的連線"

#: src/datatypes.c:403
#, fuzzy
msgid "bad network or no connection"
msgstr "唯讀的連線"

#: src/datatypes.c:539
#, fuzzy
msgid "bad interface or no connection"
msgstr "無法將網路加入至連線雜湊表"

#: src/datatypes.c:673
#, fuzzy
msgid "bad storage pool or no connection"
msgstr "無法將網路加入至連線雜湊表"

#: src/datatypes.c:719
#, fuzzy
msgid "missing key"
msgstr "找不到 \""

#: src/datatypes.c:744
#, c-format
msgid "Volume key %s too large for destination"
msgstr ""

#: src/datatypes.c:815
#, fuzzy
msgid "bad storage volume or no connection"
msgstr "無效的網路指標，於 "

#: src/datatypes.c:979
#, fuzzy
msgid "missing usageID"
msgstr "找不到 \""

#: src/datatypes.c:1062
#, fuzzy
msgid "bad secret or no connection"
msgstr "沒有有效的連線"

#: src/datatypes.c:1255
#, fuzzy
msgid "bad nwfilter or no connection"
msgstr "唯讀的連線"

#: src/datatypes.c:1280
#, fuzzy
msgid "bad domain"
msgstr "重新啟動區域"

#: src/datatypes.c:1345
#, fuzzy
msgid "not a snapshot"
msgstr "建立網路。"

#: src/driver.c:68
#, fuzzy, c-format
msgid "failed to load module %s %s"
msgstr "無法暫停區域 %s"

#: src/driver.c:78
#, fuzzy, c-format
msgid "Missing module registration symbol %s"
msgstr "找不到 %s 的裝置資訊"

#: src/driver.c:83
#, fuzzy, c-format
msgid "Failed module registration %s"
msgstr "無法刪除區域 %s"

#: src/esx/esx_driver.c:191
#, c-format
msgid ""
"File name '%s' doesn't have expected format '/vmfs/volumes/<datastore>/"
"<path>'"
msgstr ""

#: src/esx/esx_driver.c:206
#, c-format
msgid "File name '%s' refers to non-existing datastore '%s'"
msgstr ""

#: src/esx/esx_driver.c:220
#, fuzzy, c-format
msgid "Could not find datastore for '%s'"
msgstr "無法連上 Xen Store %s"

#: src/esx/esx_driver.c:366
#, c-format
msgid "Could not lookup controller model for '%s'"
msgstr ""

#: src/esx/esx_driver.c:384
#, c-format
msgid "Found unexpected controller model '%s' for disk '%s'"
msgstr ""

#: src/esx/esx_driver.c:427 src/esx/esx_driver.c:507 src/esx/esx_driver.c:1112
#: src/esx/esx_driver.c:1213 src/esx/esx_driver.c:1311
#: src/esx/esx_driver.c:2551
msgid "Could not retrieve the HostSystem object"
msgstr ""

#: src/esx/esx_driver.c:455
#, c-format
msgid ""
"Bit 29 (Long Mode) of HostSystem property 'hardware.cpuFeature[].edx' with "
"value '%s' has unexpected value '%c', expecting '0' or '1'"
msgstr ""

#: src/esx/esx_driver.c:637 src/esx/esx_driver.c:1452
#: src/esx/esx_driver.c:2799 src/esx/esx_driver.c:4205
#: src/esx/esx_storage_driver.c:171 src/esx/esx_storage_driver.c:672
#: src/esx/esx_util.c:57 src/esx/esx_util.c:292 src/esx/esx_vi.c:291
#: src/esx/esx_vi.c:733 src/esx/esx_vi.c:780 src/esx/esx_vi.c:820
#: src/esx/esx_vi.c:1044 src/esx/esx_vi.c:1080 src/esx/esx_vi.c:1096
#: src/esx/esx_vi.c:1119 src/esx/esx_vi.c:1159 src/esx/esx_vi.c:1188
#: src/esx/esx_vi.c:1222 src/esx/esx_vi.c:1277 src/esx/esx_vi.c:1303
#: src/esx/esx_vi.c:1349 src/esx/esx_vi.c:1377 src/esx/esx_vi.c:1610
#: src/esx/esx_vi.c:1788 src/esx/esx_vi.c:1814 src/esx/esx_vi.c:1850
#: src/esx/esx_vi.c:1884 src/esx/esx_vi.c:1921 src/esx/esx_vi.c:2028
#: src/esx/esx_vi.c:2194 src/esx/esx_vi.c:2238 src/esx/esx_vi.c:2303
#: src/esx/esx_vi.c:2357 src/esx/esx_vi.c:2492 src/esx/esx_vi.c:2560
#: src/esx/esx_vi.c:2647 src/esx/esx_vi.c:2713 src/esx/esx_vi.c:2762
#: src/esx/esx_vi.c:2871 src/esx/esx_vi.c:2927 src/esx/esx_vi.c:3024
#: src/esx/esx_vi.c:3221 src/esx/esx_vi.c:3329 src/esx/esx_vi.c:3387
#: src/esx/esx_vi.c:3444 src/esx/esx_vi.c:3499 src/esx/esx_vi.c:3617
#: src/esx/esx_vi_methods.c:44 src/esx/esx_vi_methods.c:272
#: src/esx/esx_vi_types.c:102 src/esx/esx_vi_types.c:193
#: src/esx/esx_vi_types.c:222 src/esx/esx_vi_types.c:263
#: src/esx/esx_vi_types.c:313 src/esx/esx_vi_types.c:581
#: src/esx/esx_vi_types.c:634 src/esx/esx_vi_types.c:822
#: src/esx/esx_vi_types.c:889 src/esx/esx_vi_types.c:1096
#: src/esx/esx_vi_types.c:1130 src/esx/esx_vi_types.c:1160
#: src/esx/esx_vi_types.c:1296 src/esx/esx_vi_types.c:1336
#: src/esx/esx_vi_types.c:1470 src/esx/esx_vi_types.c:1538
#: src/esx/esx_vi_types.c:1568 src/esx/esx_vi_types.c:1644
#: src/esx/esx_vi_types.c:1737 src/esx/esx_vi_types.c:1829 src/vmx/vmx.c:1732
#: src/vmx/vmx.c:1799 src/vmx/vmx.c:1906 src/vmx/vmx.c:2263 src/vmx/vmx.c:2484
#: src/vmx/vmx.c:2685 src/vmx/vmx.c:2789 src/vmx/vmx.c:3155 src/vmx/vmx.c:3205
#: src/vmx/vmx.c:3295 src/vmx/vmx.c:3379
#, fuzzy
msgid "Invalid argument"
msgstr "無效的參數，於 "

#: src/esx/esx_driver.c:656 src/esx/esx_driver.c:786
#: src/phyp/phyp_driver.c:989 src/xenapi/xenapi_driver.c:126
#, fuzzy
msgid "Username request failed"
msgstr "發送要求"

#: src/esx/esx_driver.c:664 src/esx/esx_driver.c:794
#: src/phyp/phyp_driver.c:1070 src/xenapi/xenapi_driver.c:135
msgid "Password request failed"
msgstr ""

#: src/esx/esx_driver.c:693
#, c-format
msgid "%s is neither an ESX 3.5 host nor an ESX 4.x host"
msgstr ""

#: src/esx/esx_driver.c:700
#, c-format
msgid "%s isn't a GSX 2.0 host"
msgstr ""

#: src/esx/esx_driver.c:767
msgid "Path has to specify the datacenter and compute resource"
msgstr ""

#: src/esx/esx_driver.c:821
#, c-format
msgid "%s is neither a vCenter 2.5 server nor a vCenter 4.x server"
msgstr ""

#: src/esx/esx_driver.c:976
msgid "This host is not managed by a vCenter"
msgstr ""

#: src/esx/esx_driver.c:983
#, c-format
msgid "vCenter IP address %s too big for destination"
msgstr ""

#: src/esx/esx_driver.c:996
#, c-format
msgid ""
"This host is managed by a vCenter with IP address %s, but a mismachting "
"vCenter '%s' (%s) has been specified"
msgstr ""

#: src/esx/esx_driver.c:1176 src/vbox/vbox_MSCOMGlue.c:401
#, fuzzy, c-format
msgid "Could not parse version number from '%s'"
msgstr "無法連上 %s"

#: src/esx/esx_driver.c:1242
msgid "Missing or empty 'hostName' property"
msgstr ""

#: src/esx/esx_driver.c:1392
#, c-format
msgid "CPU Model %s too long for destination"
msgstr ""

#: src/esx/esx_driver.c:1486
#, fuzzy, c-format
msgid "Failed to parse positive integer from '%s'"
msgstr "無法從 %s 回復區域"

#: src/esx/esx_driver.c:1588
#, fuzzy, c-format
msgid "No domain with ID %d"
msgstr "節點的區域清單"

#: src/esx/esx_driver.c:1676
#, fuzzy, c-format
msgid "No domain with name '%s'"
msgstr "區域 ID 或名稱"

#: src/esx/esx_driver.c:1734 src/esx/esx_driver.c:1847
#: src/esx/esx_driver.c:1890 src/esx/esx_driver.c:1943
#, fuzzy
msgid "Domain is not powered on"
msgstr "區域資訊"

#: src/esx/esx_driver.c:1747
#, fuzzy, c-format
msgid "Could not suspend domain: %s"
msgstr "無法暫停區域 %s"

#: src/esx/esx_driver.c:1791
#, fuzzy
msgid "Domain is not suspended"
msgstr "區域 %s 已經暫停\n"

#: src/esx/esx_driver.c:1805
#, fuzzy, c-format
msgid "Could not resume domain: %s"
msgstr "無法繼續區域 %s"

#: src/esx/esx_driver.c:1956
#, fuzzy, c-format
msgid "Could not destroy domain: %s"
msgstr "無法刪除區域 %s"

#: src/esx/esx_driver.c:2021
#, c-format
msgid "Got invalid memory size %d"
msgstr ""

#: src/esx/esx_driver.c:2070 src/esx/esx_driver.c:2910
#, fuzzy
msgid "Domain is not powered off"
msgstr "區域資訊"

#: src/esx/esx_driver.c:2094
#, fuzzy, c-format
msgid "Could not set max-memory to %lu kilobytes: %s"
msgstr "最大記憶體限制（位元組）"

#: src/esx/esx_driver.c:2151
#, fuzzy, c-format
msgid "Could not set memory to %lu kilobytes: %s"
msgstr "最大記憶體限制（位元組）"

#: src/esx/esx_driver.c:2377 src/esx/esx_driver.c:2385
#, c-format
msgid "QueryPerf returned object with unexpected type '%s'"
msgstr ""

#: src/esx/esx_driver.c:2444 src/esx/esx_driver.c:2528
#: src/phyp/phyp_driver.c:1520 src/phyp/phyp_driver.c:3877
#: src/vbox/vbox_tmpl.c:1983 src/vbox/vbox_tmpl.c:2041
#: src/xenapi/xenapi_driver.c:1011 src/xenapi/xenapi_driver.c:1183
#, c-format
msgid "unsupported flags: (0x%x)"
msgstr ""

#: src/esx/esx_driver.c:2450
#, fuzzy
msgid "Requested number of virtual CPUs must at least be 1"
msgstr "改變在客座區域中啟用的虛擬器處理器數量"

#: src/esx/esx_driver.c:2466
#, c-format
msgid ""
"Requested number of virtual CPUs is greater than max allowable number of "
"virtual CPUs for the domain: %d > %d"
msgstr ""

#: src/esx/esx_driver.c:2493
#, fuzzy, c-format
msgid "Could not set number of virtual CPUs to %d: %s"
msgstr "改變虛擬處理器的數量"

#: src/esx/esx_driver.c:2713 src/esx/esx_driver.c:2752
#, c-format
msgid "Unsupported config format '%s'"
msgstr ""

#: src/esx/esx_driver.c:2924
#, fuzzy, c-format
msgid "Could not start domain: %s"
msgstr "無法開啟區域 %s"

#: src/esx/esx_driver.c:3006
msgid "Domain already exists, editing existing domains is not supported yet"
msgstr ""

#: src/esx/esx_driver.c:3042 src/vmware/vmware_conf.c:355
msgid ""
"Domain XML doesn't contain any disks, cannot deduce datastore and path for "
"VMX file"
msgstr ""

#: src/esx/esx_driver.c:3057 src/vmware/vmware_conf.c:370
msgid ""
"Domain XML doesn't contain any file-based harddisks, cannot deduce datastore "
"and path for VMX file"
msgstr ""

#: src/esx/esx_driver.c:3064 src/vmware/vmware_conf.c:377
msgid ""
"First file-based harddisk has no source, cannot deduce datastore and path "
"for VMX file"
msgstr ""

#: src/esx/esx_driver.c:3076 src/vmware/vmware_conf.c:388
#, c-format
msgid "Expecting source '%s' of first file-based harddisk to be a VMDK image"
msgstr ""

#: src/esx/esx_driver.c:3146
#, fuzzy, c-format
msgid "Could not define domain: %s"
msgstr "無法為區域 %s 取消定義"

#: src/esx/esx_driver.c:3215
#, fuzzy
msgid "Domain is not suspended or powered off"
msgstr "區域 %s 已經暫停\n"

#: src/esx/esx_driver.c:3355
msgid "Cannot enable general autostart option without affecting other domains"
msgstr ""

#: src/esx/esx_driver.c:3475
msgid "Parameter array must have space for 3 items"
msgstr ""

#: src/esx/esx_driver.c:3559
#, c-format
msgid "Shares level has unknown value %d"
msgstr ""

#: src/esx/esx_driver.c:3620
#, c-format
msgid "Could not set reservation to %lld MHz, expecting positive value"
msgstr ""

#: src/esx/esx_driver.c:3634
#, c-format
msgid ""
"Could not set limit to %lld MHz, expecting positive value or -1 (unlimited)"
msgstr ""

#: src/esx/esx_driver.c:3674
#, c-format
msgid ""
"Could not set shares to %d, expecting positive value or -1 (low), -2 "
"(normal) or -3 (high)"
msgstr ""

#: src/esx/esx_driver.c:3681 src/esx/esx_driver.c:4471
#, fuzzy, c-format
msgid "Unknown field '%s'"
msgstr "未知的指令：「%s」"

#: src/esx/esx_driver.c:3698
#, fuzzy, c-format
msgid "Could not change scheduler parameters: %s"
msgstr "無法連上 %s"

#: src/esx/esx_driver.c:3768
msgid "Migration not possible without a vCenter"
msgstr ""

#: src/esx/esx_driver.c:3774
#, fuzzy
msgid "Renaming domains on migration not supported"
msgstr "找不到區域名稱的資訊，於 %s"

#: src/esx/esx_driver.c:3792
msgid "Only vpxmigr:// migration URIs are supported"
msgstr ""

#: src/esx/esx_driver.c:3798
msgid "Migration source and destination have to refer to the same vCenter"
msgstr ""

#: src/esx/esx_driver.c:3808
msgid "Migration URI has to specify resource pool and host system"
msgstr ""

#: src/esx/esx_driver.c:3843
#, c-format
msgid "Could not migrate domain, validation reported a problem: %s"
msgstr ""

#: src/esx/esx_driver.c:3847
msgid "Could not migrate domain, validation reported a problem"
msgstr ""

#: src/esx/esx_driver.c:3869
#, c-format
msgid "Could not migrate domain, migration task finished with an error: %s"
msgstr ""

#: src/esx/esx_driver.c:3942
msgid "Could not retrieve memory usage of resource pool"
msgstr ""

#: src/esx/esx_driver.c:4080
#, c-format
msgid "Snapshot '%s' already exists"
msgstr ""

#: src/esx/esx_driver.c:4096
#, fuzzy, c-format
msgid "Could not create snapshot: %s"
msgstr "無法連上 %s"

#: src/esx/esx_driver.c:4358
#, fuzzy, c-format
msgid "Could not revert to snapshot '%s': %s"
msgstr "無法連上 %s"

#: src/esx/esx_driver.c:4417
#, fuzzy, c-format
msgid "Could not delete snapshot '%s': %s"
msgstr "無法連上 %s"

#: src/esx/esx_driver.c:4488
#, fuzzy, c-format
msgid "Could not change memory parameters: %s"
msgstr "無法連上 %s"

#: src/esx/esx_driver.c:4525
msgid "Parameter array must have space for 1 item"
msgstr ""

#: src/esx/esx_storage_driver.c:88 src/esx/esx_storage_driver.c:572
msgid "DatastoreInfo has unexpected type"
msgstr ""

#: src/esx/esx_storage_driver.c:343
#, c-format
msgid "Could not find datastore with UUID '%s'"
msgstr ""

#: src/esx/esx_storage_driver.c:560
#, fuzzy, c-format
msgid "Datastore has unexpected type '%s'"
msgstr "無預期的資料「%s」"

#: src/esx/esx_storage_driver.c:610
msgid "Cannot deactivate storage pool autostart"
msgstr ""

#: src/esx/esx_storage_driver.c:840
msgid ""
"QueryVirtualDiskUuid not avialable, cannot lookup storage volume by UUID"
msgstr ""

#: src/esx/esx_storage_driver.c:1002 src/esx/esx_storage_driver.c:1235
msgid "Creating non-file volumes is not supported"
msgstr ""

#: src/esx/esx_storage_driver.c:1011 src/esx/esx_storage_driver.c:1244
#, c-format
msgid "Volume name '%s' doesn't have expected format '<directory>/<file>'"
msgstr ""

#: src/esx/esx_storage_driver.c:1018 src/esx/esx_storage_driver.c:1251
#, c-format
msgid "Volume name '%s' has unsupported suffix, expecting '.vmdk'"
msgstr ""

#: src/esx/esx_storage_driver.c:1098
msgid "Unsupported capacity-to-allocation relation"
msgstr ""

#: src/esx/esx_storage_driver.c:1123
#, fuzzy, c-format
msgid "Could not create volume: %s"
msgstr "無法連上 %s"

#: src/esx/esx_storage_driver.c:1151 src/esx/esx_storage_driver.c:1352
#, c-format
msgid "Creation of %s volumes is not supported"
msgstr ""

#: src/esx/esx_storage_driver.c:1324
#, fuzzy, c-format
msgid "Could not copy volume: %s"
msgstr "無法連上 %s"

#: src/esx/esx_storage_driver.c:1411
#, fuzzy, c-format
msgid "Could not delete volume: %s"
msgstr "無法連上 %s"

#: src/esx/esx_storage_driver.c:1459
#, fuzzy, c-format
msgid "Could not wipe volume: %s"
msgstr "無法連上 %s"

#: src/esx/esx_storage_driver.c:1594
#, c-format
msgid "File '%s' has unknown type"
msgstr ""

#: src/esx/esx_util.c:92
#, c-format
msgid ""
"Query parameter 'transport' has unexpected value '%s' (should be http|https)"
msgstr ""

#: src/esx/esx_util.c:110
#, c-format
msgid ""
"Query parameter 'no_verify' has unexpected value '%s' (should be 0 or 1)"
msgstr ""

#: src/esx/esx_util.c:120
#, c-format
msgid ""
"Query parameter 'auto_answer' has unexpected value '%s' (should be 0 or 1)"
msgstr ""

#: src/esx/esx_util.c:146
#, c-format
msgid ""
"Query parameter 'proxy' contains unexpected type '%s' (should be (http|socks"
"(|4|4a|5))"
msgstr ""

#: src/esx/esx_util.c:164
msgid "Query parameter 'proxy' doesn't contain a hostname"
msgstr ""

#: src/esx/esx_util.c:176
#, c-format
msgid ""
"Query parameter 'proxy' has unexpected portvalue '%s' (should be [1..65535])"
msgstr ""

#: src/esx/esx_util.c:304
#, c-format
msgid "Datastore path '%s' doesn't have expected format '[<datastore>] <path>'"
msgstr ""

#: src/esx/esx_util.c:387
#, c-format
msgid "IP address lookup for host '%s' failed: %s"
msgstr ""

#: src/esx/esx_util.c:394
#, c-format
msgid "No IP address for host '%s' found: %s"
msgstr ""

#: src/esx/esx_util.c:404
#, c-format
msgid "Formating IP address for host '%s' failed: %s"
msgstr ""

#: src/esx/esx_util.c:424 src/esx/esx_vi.c:2094 src/vmx/vmx.c:694
#, c-format
msgid "Could not parse UUID from string '%s'"
msgstr ""

#: src/esx/esx_vi.c:233
#, c-format
msgid "curl_easy_perform() returned an error: %s (%d) : %s"
msgstr ""

#: src/esx/esx_vi.c:243
#, c-format
msgid ""
"curl_easy_getinfo(CURLINFO_RESPONSE_CODE) returned an error: %s (%d) : %s"
msgstr ""

#: src/esx/esx_vi.c:251
msgid ""
"curl_easy_getinfo(CURLINFO_RESPONSE_CODE) returned a negative response code"
msgstr ""

#: src/esx/esx_vi.c:263
#, c-format
msgid ""
"curl_easy_getinfo(CURLINFO_REDIRECT_URL) returned an error: %s (%d) : %s"
msgstr ""

#: src/esx/esx_vi.c:269
#, c-format
msgid "The server redirects from '%s' to '%s'"
msgstr ""

#: src/esx/esx_vi.c:274
#, c-format
msgid "The server redirects from '%s'"
msgstr ""

#: src/esx/esx_vi.c:304
msgid "Could not initialize CURL"
msgstr ""

#: src/esx/esx_vi.c:324
msgid "Could not build CURL header list"
msgstr ""

#: src/esx/esx_vi.c:360
msgid "Could not initialize CURL mutex"
msgstr ""

#: src/esx/esx_vi.c:391
#, c-format
msgid "Expecting VI API major/minor version '2.5' or '4.x' but found '%s'"
msgstr ""

#: src/esx/esx_vi.c:401
#, c-format
msgid "Expecting GSX major/minor version '2.0' but found '%s'"
msgstr ""

#: src/esx/esx_vi.c:420
#, c-format
msgid "Expecting ESX major/minor version '3.5' or '4.x' but found '%s'"
msgstr ""

#: src/esx/esx_vi.c:439
#, c-format
msgid "Expecting VPX major/minor version '2.5' or '4.x' but found '%s'"
msgstr ""

#: src/esx/esx_vi.c:445
#, c-format
msgid ""
"Expecting product 'gsx' or 'esx' or 'embeddedEsx' or 'vpx' but found '%s'"
msgstr ""

#: src/esx/esx_vi.c:452
#, c-format
msgid "Expecting VI API type 'HostAgent' or 'VirtualCenter' but found '%s'"
msgstr ""

#: src/esx/esx_vi.c:524
#, fuzzy, c-format
msgid "Could not find datacenter '%s'"
msgstr "無法連上 Xen Store %s"

#: src/esx/esx_vi.c:568
#, c-format
msgid "Could not find compute resource '%s'"
msgstr ""

#: src/esx/esx_vi.c:583
msgid "Could not retrieve resource pool"
msgstr ""

#: src/esx/esx_vi.c:592
msgid "Path has to specify the host system"
msgstr ""

#: src/esx/esx_vi.c:633
#, c-format
msgid "Could not find host system '%s'"
msgstr ""

#: src/esx/esx_vi.c:752
#, c-format
msgid "HTTP response code %d for download from '%s'"
msgstr ""

#: src/esx/esx_vi.c:799
#, c-format
msgid "HTTP response code %d for upload to '%s'"
msgstr ""

#: src/esx/esx_vi.c:857
#, c-format
msgid "Response for call to '%s' could not be parsed"
msgstr ""

#: src/esx/esx_vi.c:864
#, c-format
msgid "Response for call to '%s' is an empty XML document"
msgstr ""

#: src/esx/esx_vi.c:873
#, fuzzy
msgid "Could not create XPath context"
msgstr "建立 xpath 的內文"

#: src/esx/esx_vi.c:888
#, c-format
msgid ""
"HTTP response code %d for call to '%s'. Fault is unknown, XPath evaluation "
"failed"
msgstr ""

#: src/esx/esx_vi.c:896
#, c-format
msgid ""
"HTTP response code %d for call to '%s'. Fault is unknown, deserialization "
"failed"
msgstr ""

#: src/esx/esx_vi.c:903
#, c-format
msgid "HTTP response code %d for call to '%s'. Fault: %s - %s"
msgstr ""

#: src/esx/esx_vi.c:925
#, c-format
msgid "XPath evaluation of response for call to '%s' failed"
msgstr ""

#: src/esx/esx_vi.c:937 src/esx/esx_vi.c:952
#, c-format
msgid "Call to '%s' returned an empty result, expecting a non-empty result"
msgstr ""

#: src/esx/esx_vi.c:942 src/esx/esx_vi.c:963
#, c-format
msgid "Call to '%s' returned a list, expecting exactly one item"
msgstr ""

#: src/esx/esx_vi.c:977
#, c-format
msgid "Call to '%s' returned something, expecting an empty result"
msgstr ""

#: src/esx/esx_vi.c:986
#, fuzzy
msgid "Invalid argument (occurrence)"
msgstr "無效的參數，於 "

#: src/esx/esx_vi.c:992
#, c-format
msgid "HTTP response code %d for call to '%s'"
msgstr ""

#: src/esx/esx_vi.c:1052 src/esx/esx_vi_types.c:807
#, c-format
msgid "Expecting type '%s' but found '%s'"
msgstr ""

#: src/esx/esx_vi.c:1066 src/esx/esx_vi.c:1138 src/esx/esx_vi_types.c:941
#, c-format
msgid "Unknown value '%s' for %s"
msgstr ""

#: src/esx/esx_vi.c:1232
#, c-format
msgid "Expecting type to begin with 'ArrayOf' but found '%s'"
msgstr ""

#: src/esx/esx_vi.c:1241 src/esx/esx_vi.c:1314
#, c-format
msgid "Wrong XML element type %d"
msgstr ""

#: src/esx/esx_vi.c:1517 src/esx/esx_vi_methods.c:165
#, fuzzy
msgid "Invalid call"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/esx/esx_vi.c:1578
msgid "Key of the current session differs from the key at last login"
msgstr ""

#: src/esx/esx_vi.c:1628 src/esx/esx_vi.c:1640 src/esx/esx_vi.c:1654
#, fuzzy, c-format
msgid "Invalid lookup of '%s' from '%s'"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/esx/esx_vi.c:1660
#, c-format
msgid "Invalid lookup from '%s'"
msgstr ""

#: src/esx/esx_vi.c:1691
#, fuzzy, c-format
msgid "Could not lookup '%s' from '%s'"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/esx/esx_vi.c:1697
#, fuzzy, c-format
msgid "Could not lookup '%s' list from '%s'"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/esx/esx_vi.c:1703
#, fuzzy
msgid "Invalid occurrence value"
msgstr "無效的參數，於 %s"

#: src/esx/esx_vi.c:1750
#, c-format
msgid "Missing '%s' property while looking for ManagedEntityStatus"
msgstr ""

#: src/esx/esx_vi.c:1773
msgid "Missing 'runtime.powerState' property"
msgstr ""

#: src/esx/esx_vi.c:1834 src/esx/esx_vi.c:1867 src/esx/esx_vi.c:1903
#: src/esx/esx_vi.c:1939
#, c-format
msgid "Missing '%s' property"
msgstr ""

#: src/esx/esx_vi.c:2012
msgid "ObjectContent does not reference a virtual machine"
msgstr ""

#: src/esx/esx_vi.c:2020
#, c-format
msgid "Could not parse positive integer from '%s'"
msgstr ""

#: src/esx/esx_vi.c:2050
msgid "Domain name contains invalid escape sequence"
msgstr ""

#: src/esx/esx_vi.c:2060
msgid "Could not get name of virtual machine"
msgstr ""

#: src/esx/esx_vi.c:2088
msgid "Could not get UUID of virtual machine"
msgstr ""

#: src/esx/esx_vi.c:2221
#, c-format
msgid "Could not find snapshot with name '%s'"
msgstr ""

#: src/esx/esx_vi.c:2256
#, c-format
msgid "Could not find domain snapshot with internal name '%s'"
msgstr ""

#: src/esx/esx_vi.c:2321
#, c-format
msgid "Could not find domain with UUID '%s'"
msgstr ""

#: src/esx/esx_vi.c:2396
#, fuzzy, c-format
msgid "Could not find domain with name '%s'"
msgstr "未定義的區域名稱或 id"

#: src/esx/esx_vi.c:2449
msgid "Other tasks are pending for this domain"
msgstr ""

#: src/esx/esx_vi.c:2530
#, c-format
msgid "Could not find datastore with name '%s'"
msgstr ""

#: src/esx/esx_vi.c:2617
#, c-format
msgid "Could not find datastore containing absolute path '%s'"
msgstr ""

#: src/esx/esx_vi.c:2687
msgid "Could not lookup datastore host mount"
msgstr ""

#: src/esx/esx_vi.c:2964
msgid "Domain has no current snapshot"
msgstr ""

#: src/esx/esx_vi.c:2971
msgid "Could not lookup root snapshot list"
msgstr ""

#: src/esx/esx_vi.c:3059
#, c-format
msgid "Datastore path '%s' doesn't reference a file"
msgstr ""

#: src/esx/esx_vi.c:3146
#, fuzzy, c-format
msgid "Could not search in datastore '%s': %s"
msgstr "無法連上 Xen Store %s"

#: src/esx/esx_vi.c:3165
#, c-format
msgid "No storage volume with key or path '%s'"
msgstr ""

#: src/esx/esx_vi.c:3291
#, fuzzy, c-format
msgid "Could not serach in datastore '%s': %s"
msgstr "無法連上 Xen Store %s"

#: src/esx/esx_vi.c:3419
#, fuzzy
msgid "Could not retrieve the AutoStartDefaults object"
msgstr "無法解析 Xend 的區域資訊"

#: src/esx/esx_vi.c:3535 src/esx/esx_vi.c:3569
#, c-format
msgid ""
"Pending question blocks virtual machine execution, question is '%s', no "
"possible answers"
msgstr ""

#: src/esx/esx_vi.c:3543
#, c-format
msgid ""
"Pending question blocks virtual machine execution, question is '%s', "
"possible answers are %s, but no default answer is specified"
msgstr ""

#: src/esx/esx_vi.c:3564
#, c-format
msgid ""
"Pending question blocks virtual machine execution, question is '%s', "
"possible answers are %s"
msgstr ""

#: src/esx/esx_vi.c:3673
msgid ""
"Cancelable task is blocked by an unanswered question but cancelation failed"
msgstr ""

#: src/esx/esx_vi.c:3678
msgid "Non-cancelable task is blocked by an unanswered question"
msgstr ""

#: src/esx/esx_vi.c:3747
#, fuzzy
msgid "Unknown error"
msgstr "未知的主機"

#: src/esx/esx_vi.c:3815
#, c-format
msgid "HostCpuIdInfo register '%s' has an unexpected length"
msgstr ""

#: src/esx/esx_vi.c:3829
#, c-format
msgid "HostCpuIdInfo register '%s' has an unexpected format"
msgstr ""

#: src/esx/esx_vi.c:3871
#, fuzzy
msgid "Unexpected product version"
msgstr "無預期的 dict 節點"

#: src/esx/esx_vi_types.c:205 src/esx/esx_vi_types.c:520
#: src/esx/esx_vi_types.c:618
#, fuzzy, c-format
msgid "Call to %s for unexpected type '%s'"
msgstr "無預期的資料「%s」"

#: src/esx/esx_vi_types.c:644
#, c-format
msgid "%s is missing 'type' property"
msgstr ""

#: src/esx/esx_vi_types.c:653
#, c-format
msgid "Unknown value '%s' for %s 'type' property"
msgstr ""

#: src/esx/esx_vi_types.c:839 src/esx/esx_vi_types.c:901
#, fuzzy
msgid "Could not copy an XML node"
msgstr "無法連上 Xen Store"

#: src/esx/esx_vi_types.c:912
msgid "AnyType is missing 'type' property"
msgstr ""

#: src/esx/esx_vi_types.c:920
#, c-format
msgid "Unknown value '%s' for AnyType 'type' property"
msgstr ""

#: src/esx/esx_vi_types.c:949
#, c-format
msgid "Value '%s' is out of %s range"
msgstr ""

#: src/esx/esx_vi_types.c:965
#, c-format
msgid "Unknown value '%s' for xsd:boolean"
msgstr ""

#: src/esx/esx_vi_types.c:1309
msgid "XML node doesn't contain text, expecting an xsd:dateTime value"
msgstr ""

#: src/esx/esx_vi_types.c:1342
#, c-format
msgid "xsd:dateTime value '%s' too long for destination"
msgstr ""

#: src/esx/esx_vi_types.c:1364 src/esx/esx_vi_types.c:1374
#: src/esx/esx_vi_types.c:1387 src/esx/esx_vi_types.c:1401
#, c-format
msgid "xsd:dateTime value '%s' has unexpected format"
msgstr ""

#: src/esx/esx_vi_types.c:1484
msgid "MethodFault is missing 'type' property"
msgstr ""

#: src/esx/esx_vi_types.c:1581
msgid "ManagedObjectReference is missing 'type' property"
msgstr ""

#: src/fdstream.c:76 src/fdstream.c:112 src/fdstream.c:179 src/fdstream.c:286
#: src/fdstream.c:338
msgid "stream is not open"
msgstr ""

#: src/fdstream.c:83 src/fdstream.c:119
msgid "stream does not have a callback registered"
msgstr ""

#: src/fdstream.c:186
msgid "stream already has a callback registered"
msgstr ""

#: src/fdstream.c:196
msgid "cannot register file watch on stream"
msgstr ""

#: src/fdstream.c:232
#, c-format
msgid "I/O helper exited with status %d"
msgstr ""

#: src/fdstream.c:236
msgid "I/O helper exited abnormally"
msgstr ""

#: src/fdstream.c:280
#, fuzzy
msgid "Too many bytes to write to stream"
msgstr "無法寫入設定檔"

#: src/fdstream.c:295 src/fdstream.c:314
msgid "cannot write to stream"
msgstr ""

#: src/fdstream.c:332
#, fuzzy
msgid "Too many bytes to read from stream"
msgstr "從 %s 回復區域\n"

#: src/fdstream.c:364
#, fuzzy
msgid "cannot read from stream"
msgstr "區域 %s 建立自 %s\n"

#: src/fdstream.c:412 src/util/event_poll.c:656
#, fuzzy
msgid "Unable to initialize mutex"
msgstr "無法列出非作用中的網路"

#: src/fdstream.c:442
#, fuzzy
msgid "Unable to open UNIX socket"
msgstr "無法暫停區域 %s"

#: src/fdstream.c:485
#, fuzzy
msgid "UNIX domain sockets are not supported on this platform"
msgstr "不支援 hypervisor"

#: src/fdstream.c:514
#, fuzzy, c-format
msgid "Unable to open stream for '%s'"
msgstr "無法暫停區域 %s"

#: src/fdstream.c:521
#, fuzzy, c-format
msgid "Unable to access stream for '%s'"
msgstr "無法從 %s 建立區域"

#: src/fdstream.c:538
#, c-format
msgid "%s: Cannot request read and write flags together"
msgstr ""

#: src/fdstream.c:546
#, fuzzy
msgid "Unable to create pipe"
msgstr "無法讀取插槽 %d\n"

#: src/fdstream.c:577 src/util/iohelper.c:71
#, fuzzy, c-format
msgid "Unable to seek %s to %llu"
msgstr "無法刪除區域 %s"

#: src/fdstream.c:608
#, c-format
msgid "Attempt to create %s without specifying mode"
msgstr ""

#: src/interface/netcf_driver.c:186
#, fuzzy
msgid "failed to get number of interfaces on host"
msgstr "無法取得節點資訊"

#: src/interface/netcf_driver.c:207
#, fuzzy
msgid "failed to list host interfaces"
msgstr "無法取得 hypervisor 類型"

#: src/interface/netcf_driver.c:228
#, fuzzy
msgid "failed to get number of defined interfaces on host"
msgstr "無法取得節點資訊"

#: src/interface/netcf_driver.c:249
#, fuzzy
msgid "failed to list host defined interfaces"
msgstr "無法列出運作中的網路"

#: src/interface/netcf_driver.c:316
msgid "multiple interfaces with matching MAC address"
msgstr ""

#: src/internal.h:232
#, c-format
msgid "%s: unsupported flags (0x%lx)"
msgstr ""

#: src/libvirt.c:527 src/libvirt.c:560 src/libvirt.c:593 src/libvirt.c:626
#: src/libvirt.c:659 src/libvirt.c:692 src/libvirt.c:728 src/libvirt.c:768
#, fuzzy, c-format
msgid "Too many drivers, cannot register %s"
msgstr "在 %s 中註冊太多驅動程式"

#: src/libvirt.c:735
#, fuzzy
msgid "Tried to register an internal Xen driver"
msgstr "無法為網路 %s 取消定義"

#: src/libvirt.c:794
#, c-format
msgid "Initialization of %s state driver failed"
msgstr ""

#: src/libvirt.c:1012
#, fuzzy
msgid "could not parse connection URI"
msgstr "無法連上 %s"

#: src/libvirt.c:1061
#, c-format
msgid "libvirt was built without the '%s' driver"
msgstr ""

#: src/libvirt.c:1084
#, fuzzy, c-format
msgid "No connection for URI %s"
msgstr "hypervisor 連線的 URI"

#: src/libvirt.c:2339
msgid "cannot get working directory"
msgstr ""

#: src/libvirt.c:2346 src/libvirt.c:2423
msgid "path too long"
msgstr ""

#: src/libvirt.c:2416
#, fuzzy
msgid "cannot get current directory"
msgstr "區域目前的記憶體"

#: src/libvirt.c:3230
msgid "virDomainGetXMLDesc with secure flag"
msgstr ""

#: src/libvirt.c:3397
#, fuzzy
msgid "domainMigratePrepare did not set uri"
msgstr "區域的資訊不正確，domid 並非數字型態"

#: src/libvirt.c:3486 src/qemu/qemu_migration.c:951
#, fuzzy
msgid "domainMigratePrepare2 did not set uri"
msgstr "區域的資訊不正確，domid 並非數字型態"

#: src/libvirt.c:3737
msgid "cannot perform tunnelled migration without using peer2peer flag"
msgstr ""

#: src/libvirt.c:4603 src/libvirt.c:4702
msgid "flags must be zero"
msgstr ""

#: src/libvirt.c:4696
msgid "path is NULL"
msgstr ""

#: src/libvirt.c:4709
msgid "buffer is NULL"
msgstr ""

#: src/libvirt.c:4811 src/qemu/qemu_driver.c:5013
msgid "flags parameter must be VIR_MEMORY_VIRTUAL or VIR_MEMORY_PHYSICAL"
msgstr ""

#: src/libvirt.c:4818
msgid "buffer is NULL but size is non-zero"
msgstr ""

#: src/libvirt.c:11223
msgid "data sources cannot be used for non-blocking streams"
msgstr ""

#: src/libvirt.c:11320
msgid "data sinks cannot be used for non-blocking streams"
msgstr ""

#: src/libvirt.c:13081
msgid "virDomainSnapshotGetXMLDesc with secure flag"
msgstr ""

#: src/lxc/lxc_container.c:152
#, fuzzy
msgid "setsid failed"
msgstr "操作失敗"

#: src/lxc/lxc_container.c:158
msgid "ioctl(TIOCSTTY) failed"
msgstr ""

#: src/lxc/lxc_container.c:173
#, fuzzy
msgid "dup2(stdin) failed"
msgstr "操作失敗"

#: src/lxc/lxc_container.c:179
msgid "dup2(stdout) failed"
msgstr ""

#: src/lxc/lxc_container.c:185
msgid "dup2(stderr) failed"
msgstr ""

#: src/lxc/lxc_container.c:213
msgid "Unable to send container continue message"
msgstr ""

#: src/lxc/lxc_container.c:242
#, fuzzy
msgid "Failed to read the container continue message"
msgstr "無法建立非運作中的區域 %s\n"

#: src/lxc/lxc_container.c:340
#, fuzzy
msgid "Failed to make root private"
msgstr "無法取得 hypervisor 類型"

#: src/lxc/lxc_container.c:351 src/lxc/lxc_container.c:373
#: src/lxc/lxc_container.c:557
#, fuzzy, c-format
msgid "Failed to create %s"
msgstr "無法讀取插槽 %d\n"

#: src/lxc/lxc_container.c:360
#, fuzzy, c-format
msgid "Failed to mount empty tmpfs at %s"
msgstr "無法將區域 %s 的核心傾印至 %s"

#: src/lxc/lxc_container.c:381
#, fuzzy, c-format
msgid "Failed to bind new root %s into tmpfs"
msgstr "無法從 %s 定義網路"

#: src/lxc/lxc_container.c:390
#, fuzzy, c-format
msgid "Failed to chroot into %s"
msgstr "無法重新啟動區域 %s"

#: src/lxc/lxc_container.c:398
#, fuzzy
msgid "Failed to pivot root"
msgstr "無法寫入插槽 %d\n"

#: src/lxc/lxc_container.c:441
#, fuzzy, c-format
msgid "Failed to mkdir %s"
msgstr "無法繼續區域 %s"

#: src/lxc/lxc_container.c:447
#, fuzzy, c-format
msgid "Failed to mount %s on %s"
msgstr "無法暫停區域 %s"

#: src/lxc/lxc_container.c:455
msgid "Cannot create /dev/pts"
msgstr ""

#: src/lxc/lxc_container.c:462
#, fuzzy
msgid "Failed to mount /dev/pts in container"
msgstr "無法為區域 %s 取消定義"

#: src/lxc/lxc_container.c:496
#, fuzzy, c-format
msgid "Failed to make device %s"
msgstr "無法從 %s 建立區域"

#: src/lxc/lxc_container.c:505
msgid "Failed to create symlink /dev/ptmx to /dev/pts/ptmx"
msgstr ""

#: src/lxc/lxc_container.c:513
#, fuzzy
msgid "Failed to make device /dev/ptmx"
msgstr "無法從 %s 建立區域"

#: src/lxc/lxc_container.c:524
msgid "Failed to symlink /dev/pts/0 to /dev/tty1"
msgstr ""

#: src/lxc/lxc_container.c:529
#, fuzzy
msgid "Failed to symlink /dev/pts/0 to /dev/console"
msgstr "無法為區域 %s 取消定義"

#: src/lxc/lxc_container.c:564 src/lxc/lxc_container.c:680
#, fuzzy, c-format
msgid "Failed to mount %s at %s"
msgstr "無法暫停區域 %s"

#: src/lxc/lxc_container.c:587
#, fuzzy
msgid "Failed to read /proc/mounts"
msgstr "無法讀取插槽 %d\n"

#: src/lxc/lxc_container.c:616
#, fuzzy, c-format
msgid "Failed to unmount '%s'"
msgstr "無法暫停區域 %s"

#: src/lxc/lxc_container.c:666
#, fuzzy
msgid "Failed to make / slave"
msgstr "無法取得 hypervisor 類型"

#: src/lxc/lxc_container.c:690
#, fuzzy
msgid "Failed to mount /proc"
msgstr "無法分配節點"

#: src/lxc/lxc_container.c:729
#, fuzzy, c-format
msgid "Failed to remove capabilities: %d"
msgstr "無法取得能力方面的資訊"

#: src/lxc/lxc_container.c:735
#, fuzzy, c-format
msgid "Failed to apply capabilities: %d"
msgstr "無法取得能力方面的資訊"

#: src/lxc/lxc_container.c:774
msgid "lxcChild() passed invalid vm definition"
msgstr ""

#: src/lxc/lxc_container.c:795
#, fuzzy, c-format
msgid "Failed to open tty %s"
msgstr "無法暫停區域 %s"

#: src/lxc/lxc_container.c:910
#, fuzzy
msgid "Failed to run clone container"
msgstr "無法為區域 %s 取消定義"

#: src/lxc/lxc_conf.c:68 src/qemu/qemu_driver.c:250 src/uml/uml_conf.c:81
msgid "cannot get the host uuid"
msgstr ""

#: src/lxc/lxc_controller.c:98
msgid "Unable to get cgroup for driver"
msgstr ""

#: src/lxc/lxc_controller.c:105
#, fuzzy, c-format
msgid "Unable to create cgroup for domain %s"
msgstr "無法建立非運作中的區域 %s\n"

#: src/lxc/lxc_controller.c:114
#, fuzzy, c-format
msgid "Unable to set Blkio weight for domain %s"
msgstr "無法開啟區域 %s"

#: src/lxc/lxc_controller.c:124
#, fuzzy, c-format
msgid "Unable to set cpu shares for domain %s"
msgstr "無法開啟區域 %s"

#: src/lxc/lxc_controller.c:133
#, fuzzy, c-format
msgid "Unable to set memory limit for domain %s"
msgstr "無法開啟區域 %s"

#: src/lxc/lxc_controller.c:142 src/qemu/qemu_cgroup.c:320
#, fuzzy, c-format
msgid "Unable to set memory hard limit for domain %s"
msgstr "無法開啟區域 %s"

#: src/lxc/lxc_controller.c:152 src/qemu/qemu_cgroup.c:329
#, fuzzy, c-format
msgid "Unable to set memory soft limit for domain %s"
msgstr "無法開啟區域 %s"

#: src/lxc/lxc_controller.c:162 src/qemu/qemu_cgroup.c:339
#, fuzzy, c-format
msgid "Unable to set swap hard limit for domain %s"
msgstr "無法開啟區域 %s"

#: src/lxc/lxc_controller.c:171
#, fuzzy, c-format
msgid "Unable to deny devices for domain %s"
msgstr "無法從 %s 建立區域"

#: src/lxc/lxc_controller.c:185
#, fuzzy, c-format
msgid "Unable to allow device %c:%d:%d for domain %s"
msgstr "無法從 %s 建立區域"

#: src/lxc/lxc_controller.c:195
#, fuzzy, c-format
msgid "Unable to allow PYT devices for domain %s"
msgstr "無法從 %s 建立區域"

#: src/lxc/lxc_controller.c:203
#, fuzzy, c-format
msgid "Unable to add task %d to cgroup for domain %s"
msgstr "無法刪除區域 %s"

#: src/lxc/lxc_controller.c:231
#, fuzzy, c-format
msgid "failed to create server socket '%s'"
msgstr "無法讀取插槽 %d\n"

#: src/lxc/lxc_controller.c:241
#, c-format
msgid "Socket path %s too long for destination"
msgstr ""

#: src/lxc/lxc_controller.c:247
#, fuzzy, c-format
msgid "failed to bind server socket '%s'"
msgstr "無法讀取插槽 %d\n"

#: src/lxc/lxc_controller.c:253
#, fuzzy, c-format
msgid "failed to listen server socket %s"
msgstr "無法關閉插槽 %d\n"

#: src/lxc/lxc_controller.c:286
#, c-format
msgid "read of fd %d failed"
msgstr ""

#: src/lxc/lxc_controller.c:293
#, c-format
msgid "write to fd %d failed"
msgstr ""

#: src/lxc/lxc_controller.c:314
#, fuzzy, c-format
msgid "failed to apply capabilities: %d"
msgstr "無法取得能力方面的資訊"

#: src/lxc/lxc_controller.c:393
msgid "epoll_create(2) failed"
msgstr ""

#: src/lxc/lxc_controller.c:403
msgid "epoll_ctl(appPty) failed"
msgstr ""

#: src/lxc/lxc_controller.c:409
msgid "epoll_ctl(contPty) failed"
msgstr ""

#: src/lxc/lxc_controller.c:417
msgid "epoll_ctl(monitor) failed"
msgstr ""

#: src/lxc/lxc_controller.c:425 src/lxc/lxc_controller.c:457
#: src/lxc/lxc_controller.c:463
msgid "epoll_ctl(client) failed"
msgstr ""

#: src/lxc/lxc_controller.c:445
msgid "accept(monitor,...) failed"
msgstr ""

#: src/lxc/lxc_controller.c:485
#, c-format
msgid "error event %d"
msgstr ""

#: src/lxc/lxc_controller.c:506
msgid "epoll_wait() failed"
msgstr ""

#: src/lxc/lxc_controller.c:593
#, fuzzy, c-format
msgid "Unable to request personality for %s on %s"
msgstr "無法開啟區域 %s"

#: src/lxc/lxc_controller.c:628
#, fuzzy
msgid "sockpair failed"
msgstr "操作失敗"

#: src/lxc/lxc_controller.c:661
msgid "Cannot unshare mount namespace"
msgstr ""

#: src/lxc/lxc_controller.c:667
msgid "Failed to switch root mount into slave mode"
msgstr ""

#: src/lxc/lxc_controller.c:679
#, fuzzy, c-format
msgid "Failed to make path %s"
msgstr "無法繼續區域 %s"

#: src/lxc/lxc_controller.c:688
#, fuzzy, c-format
msgid "Failed to mount devpts on %s"
msgstr "無法為區域 %s 取消定義"

#: src/lxc/lxc_controller.c:706 src/lxc/lxc_controller.c:715
#: src/lxc/lxc_driver.c:1509
#, fuzzy
msgid "Failed to allocate tty"
msgstr "無法分配節點"

#: src/lxc/lxc_controller.c:897
#, fuzzy, c-format
msgid "Unable to write pid file '%s/%s.pid'"
msgstr "無法寫入設定檔"

#: src/lxc/lxc_controller.c:911
msgid "Unable to change to root dir"
msgstr ""

#: src/lxc/lxc_controller.c:917
msgid "Unable to become session leader"
msgstr ""

#: src/lxc/lxc_controller.c:928
#, fuzzy
msgid "Failed to accept a connection from driver"
msgstr "無法從 %s 建立網路"

#: src/lxc/lxc_driver.c:137
#, c-format
msgid "Unexpected LXC URI path '%s', try lxc:///"
msgstr ""

#: src/lxc/lxc_driver.c:145
msgid "lxc state driver is not active"
msgstr ""

#: src/lxc/lxc_driver.c:208
#, c-format
msgid "No domain with matching id %d"
msgstr ""

#: src/lxc/lxc_driver.c:237 src/lxc/lxc_driver.c:291 src/lxc/lxc_driver.c:316
#: src/lxc/lxc_driver.c:340 src/lxc/lxc_driver.c:468 src/lxc/lxc_driver.c:521
#: src/lxc/lxc_driver.c:581 src/lxc/lxc_driver.c:610 src/lxc/lxc_driver.c:635
#: src/lxc/lxc_driver.c:667 src/lxc/lxc_driver.c:729 src/lxc/lxc_driver.c:828
#: src/lxc/lxc_driver.c:934 src/lxc/lxc_driver.c:1620
#: src/lxc/lxc_driver.c:1888 src/lxc/lxc_driver.c:2267
#: src/lxc/lxc_driver.c:2334 src/lxc/lxc_driver.c:2380
#: src/lxc/lxc_driver.c:2434 src/lxc/lxc_driver.c:2461
#: src/lxc/lxc_driver.c:2631 src/lxc/lxc_driver.c:2696
#: src/libxl/libxl_driver.c:1061 src/libxl/libxl_driver.c:1119
#: src/libxl/libxl_driver.c:1174 src/libxl/libxl_driver.c:1218
#: src/libxl/libxl_driver.c:1259 src/libxl/libxl_driver.c:1309
#: src/libxl/libxl_driver.c:1919 src/vmware/vmware_driver.c:574
#, c-format
msgid "No domain with matching uuid '%s'"
msgstr ""

#: src/lxc/lxc_driver.c:263
#, c-format
msgid "No domain with matching name '%s'"
msgstr ""

#: src/lxc/lxc_driver.c:418 src/lxc/lxc_driver.c:1626
#: src/lxc/lxc_driver.c:1697
msgid "System lacks NETNS support"
msgstr ""

#: src/lxc/lxc_driver.c:474
#, fuzzy
msgid "Cannot delete active domain"
msgstr "非作用中區域的名稱"

#: src/lxc/lxc_driver.c:480
#, fuzzy
msgid "Cannot undefine transient domain"
msgstr "取消定義非作用中的區域"

#: src/lxc/lxc_driver.c:533 src/lxc/lxc_driver.c:691 src/lxc/lxc_driver.c:846
#, fuzzy, c-format
msgid "Unable to get cgroup for %s"
msgstr "無法刪除網路 %s"

#: src/lxc/lxc_driver.c:539
#, fuzzy
msgid "Cannot read cputime for domain"
msgstr "傾印一個區域的核心。"

#: src/lxc/lxc_driver.c:544
msgid "Cannot read memory usage for domain"
msgstr ""

#: src/lxc/lxc_driver.c:641
msgid "Cannot set max memory lower than current memory"
msgstr ""

#: src/lxc/lxc_driver.c:673
msgid "Cannot set memory higher than max memory"
msgstr ""

#: src/lxc/lxc_driver.c:679 src/lxc/lxc_driver.c:1894
#: src/lxc/lxc_driver.c:2386 src/lxc/lxc_driver.c:2637
#: src/lxc/lxc_driver.c:2702 src/libxl/libxl_driver.c:1065
#: src/libxl/libxl_driver.c:1124 src/libxl/libxl_driver.c:1180
#: src/libxl/libxl_driver.c:1224 src/libxl/libxl_driver.c:1265
#: src/libxl/libxl_driver.c:1640 src/libxl/libxl_driver.c:1722
#: src/libxl/libxl_driver.c:2124 src/openvz/openvz_driver.c:489
#: src/openvz/openvz_driver.c:527
#, fuzzy
msgid "Domain is not running"
msgstr "區域還在執行中"

#: src/lxc/lxc_driver.c:685
msgid "cgroups must be configured on the host"
msgstr ""

#: src/lxc/lxc_driver.c:697
#, fuzzy
msgid "Failed to set memory for domain"
msgstr "無法刪除區域 %s"

#: src/lxc/lxc_driver.c:735 src/qemu/qemu_driver.c:4260
#: src/qemu/qemu_driver.c:4349 src/qemu/qemu_driver.c:4420
#: src/qemu/qemu_driver.c:4536 src/qemu/qemu_driver.c:4636
#: src/qemu/qemu_driver.c:4709
#, c-format
msgid "cannot find cgroup for domain %s"
msgstr ""

#: src/lxc/lxc_driver.c:747 src/qemu/qemu_driver.c:4432
msgid "invalid type for memory hard_limit tunable, expected a 'ullong'"
msgstr ""

#: src/lxc/lxc_driver.c:755 src/qemu/qemu_driver.c:4440
msgid "unable to set memory hard_limit tunable"
msgstr ""

#: src/lxc/lxc_driver.c:762 src/qemu/qemu_driver.c:4447
msgid "invalid type for memory soft_limit tunable, expected a 'ullong'"
msgstr ""

#: src/lxc/lxc_driver.c:770 src/qemu/qemu_driver.c:4455
msgid "unable to set memory soft_limit tunable"
msgstr ""

#: src/lxc/lxc_driver.c:777 src/qemu/qemu_driver.c:4462
msgid "invalid type for swap_hard_limit tunable, expected a 'ullong'"
msgstr ""

#: src/lxc/lxc_driver.c:785 src/qemu/qemu_driver.c:4470
msgid "unable to set swap_hard_limit tunable"
msgstr ""

#: src/lxc/lxc_driver.c:790 src/qemu/qemu_driver.c:4475
#, c-format
msgid "Memory tunable `%s' not implemented"
msgstr ""

#: src/lxc/lxc_driver.c:794 src/qemu/qemu_driver.c:4292
#: src/qemu/qemu_driver.c:4479
#, c-format
msgid "Parameter `%s' not supported"
msgstr ""

#: src/lxc/lxc_driver.c:840 src/lxc/lxc_driver.c:2323
#: src/qemu/qemu_driver.c:4343 src/qemu/qemu_driver.c:4530
#: src/qemu/qemu_driver.c:4695
#, fuzzy
msgid "Invalid parameter count"
msgstr "無效的參數，於 "

#: src/lxc/lxc_driver.c:861 src/qemu/qemu_driver.c:4551
msgid "unable to get memory hard limit"
msgstr ""

#: src/lxc/lxc_driver.c:866 src/qemu/qemu_driver.c:4556
msgid "Field memory hard limit too long for destination"
msgstr ""

#: src/lxc/lxc_driver.c:876 src/qemu/qemu_driver.c:4566
msgid "unable to get memory soft limit"
msgstr ""

#: src/lxc/lxc_driver.c:881 src/qemu/qemu_driver.c:4571
msgid "Field memory soft limit too long for destination"
msgstr ""

#: src/lxc/lxc_driver.c:891 src/qemu/qemu_driver.c:4581
#, fuzzy
msgid "unable to get swap hard limit"
msgstr "無法取得能力方面的資訊"

#: src/lxc/lxc_driver.c:896 src/qemu/qemu_driver.c:4586
msgid "Field swap hard limit too long for destination"
msgstr ""

#: src/lxc/lxc_driver.c:1031
#, fuzzy
msgid "Unable to initialize bridging"
msgstr "無法列出非作用中的網路"

#: src/lxc/lxc_driver.c:1073
#, fuzzy
msgid "Failed to get bridge for interface"
msgstr "無法取得節點資訊"

#: src/lxc/lxc_driver.c:1104
#, fuzzy, c-format
msgid "Failed to add %s device to %s"
msgstr "無法從 %s 建立區域"

#: src/lxc/lxc_driver.c:1137
#, fuzzy
msgid "Failed to create client socket"
msgstr "無法寫入插槽 %d\n"

#: src/lxc/lxc_driver.c:1145
#, c-format
msgid "Socket path %s too big for destination"
msgstr ""

#: src/lxc/lxc_driver.c:1151
#, fuzzy
msgid "Failed to connect to client socket"
msgstr "無法連上 Xen Store"

#: src/lxc/lxc_driver.c:1173
#, fuzzy, c-format
msgid "Invalid PID %d for container"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/lxc/lxc_driver.c:1183
#, fuzzy
msgid "Failed to kill container PIDs"
msgstr "無法為區域 %s 取消定義"

#: src/lxc/lxc_driver.c:1189
msgid "Some container PIDs refused to die"
msgstr ""

#: src/lxc/lxc_driver.c:1407
#, c-format
msgid "Cannot wait for '%s'"
msgstr ""

#: src/lxc/lxc_driver.c:1414
#, c-format
msgid "Container '%s' unexpectedly shutdown during startup"
msgstr ""

#: src/lxc/lxc_driver.c:1470
msgid "The 'cpuacct', 'devices' & 'memory' cgroups controllers must be mounted"
msgstr ""

#: src/lxc/lxc_driver.c:1477
#, fuzzy
msgid "Unable to find 'cpuacct' cgroups controller mount"
msgstr "無法為網路 %s 取消定義"

#: src/lxc/lxc_driver.c:1483
#, fuzzy
msgid "Unable to find 'devices' cgroups controller mount"
msgstr "無法為網路 %s 取消定義"

#: src/lxc/lxc_driver.c:1489
#, fuzzy
msgid "Unable to find 'memory' cgroups controller mount"
msgstr "無法為網路 %s 取消定義"

#: src/lxc/lxc_driver.c:1495
#, c-format
msgid "Cannot create log directory '%s'"
msgstr ""

#: src/lxc/lxc_driver.c:1530
#, fuzzy, c-format
msgid "Failed to open '%s'"
msgstr "無法暫停區域 %s"

#: src/lxc/lxc_driver.c:1550
#, fuzzy, c-format
msgid "Failed to read pid file %s/%s.pid"
msgstr "無法讀取描述檔 %s"

#: src/lxc/lxc_driver.c:1581
#, fuzzy
msgid "could not close logfile"
msgstr "無法連上 %s"

#: src/lxc/lxc_driver.c:1632 src/libxl/libxl_driver.c:1925
#: src/vmware/vmware_driver.c:580
msgid "Domain is already running"
msgstr "區域已經啟動"

#: src/lxc/lxc_driver.c:1949 src/qemu/qemu_driver.c:154
#: src/uml/uml_driver.c:163
#, fuzzy, c-format
msgid "Failed to autostart VM '%s': %s"
msgstr "無法暫停區域 %s"

#: src/lxc/lxc_driver.c:2224
#, fuzzy, c-format
msgid "Unknown release: %s"
msgstr "未知的主機 %s"

#: src/lxc/lxc_driver.c:2279 src/qemu/qemu_driver.c:4661
#, fuzzy, c-format
msgid "Invalid parameter `%s'"
msgstr "無效的參數，於 %s"

#: src/lxc/lxc_driver.c:2285
msgid "Invalid type for cpu_shares tunable, expected a 'ullong'"
msgstr ""

#: src/lxc/lxc_driver.c:2291
#, fuzzy, c-format
msgid "failed to set cpu_shares=%llu"
msgstr "無法取得能力方面的資訊"

#: src/lxc/lxc_driver.c:2346
msgid "Field cpu_shares too big for destination"
msgstr ""

#: src/lxc/lxc_driver.c:2403
#, c-format
msgid "Invalid path, '%s' is not a known interface"
msgstr ""

#: src/lxc/lxc_driver.c:2467
#, fuzzy
msgid "Cannot set autostart for transient domain"
msgstr "自動啟動一個區域"

#: src/lxc/lxc_driver.c:2492
#, c-format
msgid "Cannot create autostart directory %s"
msgstr ""

#: src/lxc/lxc_driver.c:2499 src/qemu/qemu_driver.c:4180
#: src/uml/uml_driver.c:1978
#, fuzzy, c-format
msgid "Failed to create symlink '%s to '%s'"
msgstr "無法將區域 %s 存至 %s"

#: src/lxc/lxc_driver.c:2506 src/network/bridge_driver.c:2463
#: src/qemu/qemu_driver.c:4187 src/storage/storage_driver.c:1041
#: src/uml/uml_driver.c:1985
#, fuzzy, c-format
msgid "Failed to delete symlink '%s'"
msgstr "無法取得區域「%s」"

#: src/lxc/lxc_driver.c:2644
#, fuzzy
msgid "Suspend operation failed"
msgstr "POST 操作失敗"

#: src/lxc/lxc_driver.c:2709
#, fuzzy
msgid "Resume operation failed"
msgstr "操作失敗"

#: src/lxc/lxc_driver.c:2751 src/libxl/libxl_driver.c:2010
#: src/qemu/qemu_driver.c:1081 src/qemu/qemu_driver.c:1133
#: src/qemu/qemu_driver.c:1157 src/qemu/qemu_driver.c:1181
#: src/qemu/qemu_driver.c:1315 src/qemu/qemu_driver.c:1384
#: src/qemu/qemu_driver.c:1438 src/qemu/qemu_driver.c:1479
#: src/qemu/qemu_driver.c:1533 src/qemu/qemu_driver.c:1560
#: src/qemu/qemu_driver.c:1595 src/qemu/qemu_driver.c:1677
#: src/qemu/qemu_driver.c:2086 src/qemu/qemu_driver.c:2135
#: src/qemu/qemu_driver.c:2179 src/qemu/qemu_driver.c:2213
#: src/qemu/qemu_driver.c:2310 src/qemu/qemu_driver.c:2534
#: src/qemu/qemu_driver.c:2646 src/qemu/qemu_driver.c:2718
#: src/qemu/qemu_driver.c:2815 src/qemu/qemu_driver.c:2860
#: src/qemu/qemu_driver.c:3238 src/qemu/qemu_driver.c:3472
#: src/qemu/qemu_driver.c:3680 src/qemu/qemu_driver.c:3735
#: src/qemu/qemu_driver.c:3918 src/qemu/qemu_driver.c:4025
#: src/qemu/qemu_driver.c:4123 src/qemu/qemu_driver.c:4150
#: src/qemu/qemu_driver.c:4759 src/qemu/qemu_driver.c:4831
#: src/qemu/qemu_driver.c:4890 src/qemu/qemu_driver.c:4935
#: src/qemu/qemu_driver.c:5007 src/qemu/qemu_driver.c:5101
#: src/qemu/qemu_driver.c:5439 src/qemu/qemu_driver.c:5676
#: src/qemu/qemu_driver.c:5731 src/qemu/qemu_driver.c:5780
#: src/qemu/qemu_driver.c:5829 src/qemu/qemu_driver.c:6091
#: src/qemu/qemu_driver.c:6170 src/qemu/qemu_driver.c:6198
#: src/qemu/qemu_driver.c:6228 src/qemu/qemu_driver.c:6263
#: src/qemu/qemu_driver.c:6291 src/qemu/qemu_driver.c:6326
#: src/qemu/qemu_driver.c:6366 src/qemu/qemu_driver.c:6637
#: src/qemu/qemu_driver.c:6702 src/qemu/qemu_driver.c:6760
#: src/test/test_driver.c:2067 src/uml/uml_driver.c:1398
#: src/uml/uml_driver.c:1423 src/uml/uml_driver.c:1456
#: src/uml/uml_driver.c:1747 src/uml/uml_driver.c:1861
#: src/uml/uml_driver.c:2095 src/vmware/vmware_driver.c:614
#, c-format
msgid "no domain with matching uuid '%s'"
msgstr ""

#: src/lxc/lxc_driver.c:2757 src/qemu/qemu_driver.c:1320
#: src/qemu/qemu_driver.c:1340 src/qemu/qemu_driver.c:1393
#: src/qemu/qemu_driver.c:1447 src/qemu/qemu_driver.c:1488
#: src/qemu/qemu_driver.c:1610 src/qemu/qemu_driver.c:2092
#: src/qemu/qemu_driver.c:2141 src/qemu/qemu_driver.c:2320
#: src/qemu/qemu_driver.c:2413 src/qemu/qemu_driver.c:2543
#: src/qemu/qemu_driver.c:4768 src/qemu/qemu_driver.c:4837
#: src/qemu/qemu_driver.c:4904 src/qemu/qemu_driver.c:5022
#: src/qemu/qemu_driver.c:5705 src/qemu/qemu_driver.c:5748
#: src/qemu/qemu_driver.c:5786 src/qemu/qemu_driver.c:5835
#: src/qemu/qemu_driver.c:6708 src/qemu/qemu_driver.c:6766
#: src/qemu/qemu_migration.c:1061 src/uml/uml_driver.c:2101
#: src/xen/xen_driver.c:1990 src/xen/xen_hypervisor.c:1178
#: src/xen/xen_hypervisor.c:1262 src/xen/xen_hypervisor.c:1371
#: src/xen/xm_internal.c:697
#, fuzzy
msgid "domain is not running"
msgstr "區域還在執行中"

#: src/lxc/lxc_driver.c:2764 src/uml/uml_driver.c:2108
#: src/xen/xen_driver.c:1997
#, fuzzy
msgid "Named device aliases are not supported"
msgstr "網路 %s 已開啟\n"

#: src/lxc/lxc_driver.c:2775 src/xen/xen_driver.c:2012
#, fuzzy
msgid "cannot find default console device"
msgstr "連接客座端主控台"

#: src/lxc/lxc_driver.c:2781 src/qemu/qemu_driver.c:6798
#: src/uml/uml_driver.c:2125 src/xen/xen_driver.c:2018
#, fuzzy, c-format
msgid "character device %s is not using a PTY"
msgstr "區域的資訊不全，沒有名稱"

#: src/lxc/veth.c:214
#, fuzzy, c-format
msgid "Failed to enable '%s' (%d)"
msgstr "無法暫停區域 %s"

#: src/libxl/libxl_driver.c:237
#, fuzzy, c-format
msgid "Unable to cleanup domain %d"
msgstr "無法建立非運作中的區域 %s\n"

#: src/libxl/libxl_driver.c:401
#, fuzzy, c-format
msgid "libxenlight failed to create new domain '%s'"
msgstr "無法建立非運作中的區域 %s\n"

#: src/libxl/libxl_driver.c:413
msgid "libxenlight failed to store userdata"
msgstr ""

#: src/libxl/libxl_driver.c:613
#, fuzzy, c-format
msgid "Failed to create log dir '%s': %s"
msgstr "無法從 %s 建立區域"

#: src/libxl/libxl_driver.c:619 src/qemu/qemu_driver.c:476
#, fuzzy, c-format
msgid "Failed to create state dir '%s': %s"
msgstr "無法建立非運作中的區域 %s\n"

#: src/libxl/libxl_driver.c:625 src/qemu/qemu_driver.c:482
#, fuzzy, c-format
msgid "Failed to create lib dir '%s': %s"
msgstr "無法從 %s 建立區域"

#: src/libxl/libxl_driver.c:631 src/qemu/qemu_driver.c:494
#: src/qemu/qemu_driver.c:500
#, fuzzy, c-format
msgid "Failed to create save dir '%s': %s"
msgstr "無法建立非運作中的區域 %s\n"

#: src/libxl/libxl_driver.c:642 src/qemu/qemu_process.c:691
#: src/qemu/qemu_process.c:723 src/uml/uml_driver.c:855
#, fuzzy, c-format
msgid "failed to create logfile %s"
msgstr "無法寫入設定檔"

#: src/libxl/libxl_driver.c:661
#, fuzzy
msgid "cannot create logger for libxenlight"
msgstr "無法讀取設定檔 %s"

#: src/libxl/libxl_driver.c:668
msgid "cannot initialize libxenlight context"
msgstr ""

#: src/libxl/libxl_driver.c:673
msgid "cannot version information from libxenlight"
msgstr ""

#: src/libxl/libxl_driver.c:681
#, fuzzy
msgid "cannot create capabilities for libxenlight"
msgstr "無法取得能力方面的資訊"

#: src/libxl/libxl_driver.c:778
msgid "libxenlight state driver is not active"
msgstr ""

#: src/libxl/libxl_driver.c:788 src/xen/xen_driver.c:288
#, c-format
msgid "unexpected Xen URI path '%s', try xen:///"
msgstr ""

#: src/libxl/libxl_driver.c:853 src/libxl/libxl_driver.c:2055
msgid "libxl_get_physinfo_info failed"
msgstr ""

#: src/libxl/libxl_driver.c:859 src/libxl/libxl_driver.c:2060
msgid "libxl_get_version_info failed"
msgstr ""

#: src/libxl/libxl_driver.c:869
#, fuzzy, c-format
msgid "machine type %s too big for destination"
msgstr "區域 %s 正在執行關機\n"

#: src/libxl/libxl_driver.c:1074
#, fuzzy, c-format
msgid "Failed to suspend domain '%d' with libxenlight"
msgstr "無法關上區域 %s"

#: src/libxl/libxl_driver.c:1133
#, fuzzy, c-format
msgid "Failed to resume domain '%d' with libxenlight"
msgstr "無法重新啟動區域 %s"

#: src/libxl/libxl_driver.c:1187
#, fuzzy, c-format
msgid "Failed to shutdown domain '%d' with libxenlight"
msgstr "無法關上區域 %s"

#: src/libxl/libxl_driver.c:1231
#, fuzzy, c-format
msgid "Failed to reboot domain '%d' with libxenlight"
msgstr "無法重新啟動區域 %s"

#: src/libxl/libxl_driver.c:1275
#, fuzzy, c-format
msgid "Failed to destroy domain '%d'"
msgstr "無法刪除區域 %s"

#: src/libxl/libxl_driver.c:1334 src/libxl/libxl_driver.c:1368
#: src/libxl/libxl_driver.c:1439 src/libxl/libxl_driver.c:1506
#: src/libxl/libxl_driver.c:1633 src/libxl/libxl_driver.c:1671
#: src/libxl/libxl_driver.c:1717 src/libxl/libxl_driver.c:1779
#: src/libxl/libxl_driver.c:2119 src/openvz/openvz_driver.c:352
#: src/openvz/openvz_driver.c:439 src/openvz/openvz_driver.c:483
#: src/openvz/openvz_driver.c:521 src/openvz/openvz_driver.c:559
#: src/openvz/openvz_driver.c:597 src/openvz/openvz_driver.c:1065
#: src/openvz/openvz_driver.c:1107 src/openvz/openvz_driver.c:1137
#: src/openvz/openvz_driver.c:1228 src/uml/uml_driver.c:1370
#: src/uml/uml_driver.c:1493 src/uml/uml_driver.c:1533
#: src/uml/uml_driver.c:1584 src/uml/uml_driver.c:1650
#: src/uml/uml_driver.c:1922 src/uml/uml_driver.c:1948
#: src/uml/uml_driver.c:2022 src/vbox/vbox_tmpl.c:1933
#: src/vbox/vbox_tmpl.c:1993 src/vbox/vbox_tmpl.c:4988
#: src/vbox/vbox_tmpl.c:5076 src/vbox/vbox_tmpl.c:5281
#: src/vbox/vbox_tmpl.c:8185 src/vmware/vmware_driver.c:321
#: src/vmware/vmware_driver.c:372 src/vmware/vmware_driver.c:421
#: src/vmware/vmware_driver.c:465 src/vmware/vmware_driver.c:804
#: src/vmware/vmware_driver.c:882
#, fuzzy
msgid "no domain with matching uuid"
msgstr "區域 id 或 uuid"

#: src/libxl/libxl_driver.c:1360 src/libxl/libxl_driver.c:1492
#: src/libxl/libxl_driver.c:1624 src/qemu/qemu_driver.c:1585
#: src/qemu/qemu_driver.c:2517 src/qemu/qemu_driver.c:2803
#: src/test/test_driver.c:2055 src/test/test_driver.c:2116
#: src/xen/xen_driver.c:1074 src/xen/xen_driver.c:1166
#, fuzzy, c-format
msgid "invalid flag combination: (0x%x)"
msgstr "無效的參數，於 %s"

#: src/libxl/libxl_driver.c:1374 src/qemu/qemu_driver.c:1601
#: src/uml/uml_driver.c:1468
msgid "cannot set memory higher than max memory"
msgstr ""

#: src/libxl/libxl_driver.c:1380
#, fuzzy
msgid "cannot set memory on an inactive domain"
msgstr "非作用中區域的名稱"

#: src/libxl/libxl_driver.c:1387 src/libxl/libxl_driver.c:1518
#: src/qemu/qemu_driver.c:1617 src/qemu/qemu_driver.c:2549
#, fuzzy
msgid "cannot change persistent config of a transient domain"
msgstr "為非作用中的區域取消定義。"

#: src/libxl/libxl_driver.c:1400
#, fuzzy, c-format
msgid "Failed to set memory for domain '%d' with libxenlight"
msgstr "無法重新啟動區域 %s"

#: src/libxl/libxl_driver.c:1449
#, c-format
msgid "libxl_domain_info failed for domain '%d'"
msgstr ""

#: src/libxl/libxl_driver.c:1497
msgid "nvcpus is zero"
msgstr ""

#: src/libxl/libxl_driver.c:1512
#, fuzzy
msgid "cannot set vcpus on an inactive domain"
msgstr "為非作用中的區域取消定義。"

#: src/libxl/libxl_driver.c:1524 src/qemu/qemu_driver.c:2562
msgid "could not determine max vcpus for the domain"
msgstr ""

#: src/libxl/libxl_driver.c:1534 src/qemu/qemu_driver.c:2572
#: src/xen/xend_internal.c:2208 src/xen/xm_internal.c:722
#, c-format
msgid ""
"requested vcpus is greater than max allowable vcpus for the domain: %d > %d"
msgstr ""

#: src/libxl/libxl_driver.c:1574 src/libxl/libxl_driver.c:1583
#, fuzzy, c-format
msgid "Failed to set vcpus for domain '%d' with libxenlight"
msgstr "無法重新啟動區域 %s"

#: src/libxl/libxl_driver.c:1677 src/qemu/qemu_driver.c:2652
#: src/test/test_driver.c:2305
#, fuzzy
msgid "cannot pin vcpus on an inactive domain"
msgstr "取消定義非作用中的區域"

#: src/libxl/libxl_driver.c:1687
#, fuzzy, c-format
msgid "Failed to pin vcpu '%d' with libxenlight"
msgstr "無法重新啟動區域 %s"

#: src/libxl/libxl_driver.c:1730
#, fuzzy, c-format
msgid "Failed to list vcpus for domain '%d' with libxenlight"
msgstr "無法重新啟動區域 %s"

#: src/libxl/libxl_driver.c:1804 src/libxl/libxl_driver.c:1845
#: src/qemu/qemu_driver.c:3288 src/qemu/qemu_driver.c:3321
#: src/xen/xen_driver.c:1236 src/xen/xen_driver.c:1283
#, c-format
msgid "unsupported config type %s"
msgstr ""

#: src/libxl/libxl_driver.c:1809 src/libxl/libxl_driver.c:1850
#, fuzzy
msgid "cannot get version information from libxenlight"
msgstr "無法取得節點資訊"

#: src/libxl/libxl_driver.c:1817
#, fuzzy
msgid "parsing xm config failed"
msgstr "無法解析伺服器的回應"

#: src/libxl/libxl_driver.c:2016 src/vmware/vmware_driver.c:620
#, fuzzy
msgid "cannot undefine active domain"
msgstr "非作用中區域的名稱"

#: src/libxl/libxl_driver.c:2022 src/qemu/qemu_driver.c:3692
#: src/uml/uml_driver.c:1662 src/vmware/vmware_driver.c:626
#, fuzzy
msgid "cannot undefine transient domain"
msgstr "取消定義非作用中的區域"

#: src/libxl/libxl_driver.c:2131
#, fuzzy, c-format
msgid "Failed to get scheduler id for domain '%d' with libxenlight"
msgstr "無法重新啟動區域 %s"

#: src/libxl/libxl_conf.c:364
#, fuzzy, c-format
msgid "libxenlight failed to parse UUID '%s'"
msgstr "無法暫停區域 %s"

#: src/libxl/libxl_conf.c:513
#, c-format
msgid "libxenlight does not support disk driver %s"
msgstr ""

#: src/libxl/libxl_conf.c:659 src/qemu/qemu_process.c:2103
msgid "Unable to find an unused VNC port"
msgstr ""

#: src/libxl/libxl_conf.c:709 src/xenxs/xen_sxpr.c:1507
#, fuzzy
msgid "unexpected chr device type"
msgstr "無預期的 mime 類型"

#: src/libxl/libxl_conf.c:847
#, fuzzy
msgid "Failed to get node physical info from libxenlight"
msgstr "無法取得節點資訊"

#: src/libxl/libxl_conf.c:853
#, fuzzy
msgid "Failed to get version info from libxenlight"
msgstr "無法取得節點資訊"

#: src/network/bridge_driver.c:307 src/qemu/qemu_command.c:231
#: src/uml/uml_conf.c:125
msgid "cannot initialize bridge support"
msgstr ""

#: src/network/bridge_driver.c:635 src/network/bridge_driver.c:641
#: src/network/bridge_driver.c:702 src/network/bridge_driver.c:708
#, c-format
msgid "cannot create directory %s"
msgstr ""

#: src/network/bridge_driver.c:694
#, c-format
msgid "Cannot find %s - Possibly the package isn't installed"
msgstr ""

#: src/network/bridge_driver.c:740
#, c-format
msgid "bridge  '%s' has an invalid prefix"
msgstr ""

#: src/network/bridge_driver.c:776
#, fuzzy, c-format
msgid "couldn't write radvd config file '%s'"
msgstr "無法寫入設定檔：%s"

#: src/network/bridge_driver.c:825 src/network/bridge_driver.c:991
#, fuzzy, c-format
msgid "Invalid prefix or netmask for '%s'"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/network/bridge_driver.c:837
#, c-format
msgid "failed to add iptables rule to allow forwarding from '%s'"
msgstr ""

#: src/network/bridge_driver.c:851
#, c-format
msgid "failed to add iptables rule to allow forwarding to '%s'"
msgstr ""

#: src/network/bridge_driver.c:886
#, c-format
msgid "failed to add iptables rule to enable masquerading to '%s'"
msgstr ""

#: src/network/bridge_driver.c:898
#, c-format
msgid "failed to add iptables rule to enable UDP masquerading to '%s'"
msgstr ""

#: src/network/bridge_driver.c:910
#, c-format
msgid "failed to add iptables rule to enable TCP masquerading to '%s'"
msgstr ""

#: src/network/bridge_driver.c:1003
#, fuzzy, c-format
msgid "failed to add iptables rule to allow routing from '%s'"
msgstr "無法從 %s 回復區域"

#: src/network/bridge_driver.c:1015
#, c-format
msgid "failed to add iptables rule to allow routing to '%s'"
msgstr ""

#: src/network/bridge_driver.c:1068
#, fuzzy, c-format
msgid "failed to add ip6tables rule to block outbound traffic from '%s'"
msgstr "無法從 %s 回復區域"

#: src/network/bridge_driver.c:1076
#, fuzzy, c-format
msgid "failed to add ip6tables rule to block inbound traffic to '%s'"
msgstr "無法從 %s 回復區域"

#: src/network/bridge_driver.c:1085
#, fuzzy, c-format
msgid "failed to add ip6tables rule to allow cross bridge traffic on '%s'"
msgstr "無法從 %s 回復區域"

#: src/network/bridge_driver.c:1094 src/network/bridge_driver.c:1102
#, fuzzy, c-format
msgid "failed to add ip6tables rule to allow DNS requests from '%s'"
msgstr "無法從 %s 回復區域"

#: src/network/bridge_driver.c:1155 src/network/bridge_driver.c:1163
#, c-format
msgid "failed to add iptables rule to allow DHCP requests from '%s'"
msgstr ""

#: src/network/bridge_driver.c:1186 src/network/bridge_driver.c:1194
#, c-format
msgid "failed to add iptables rule to allow DNS requests from '%s'"
msgstr ""

#: src/network/bridge_driver.c:1204
#, c-format
msgid "failed to add iptables rule to allow TFTP requests from '%s'"
msgstr ""

#: src/network/bridge_driver.c:1214
#, c-format
msgid "failed to add iptables rule to block outbound traffic from '%s'"
msgstr ""

#: src/network/bridge_driver.c:1222
#, c-format
msgid "failed to add iptables rule to block inbound traffic to '%s'"
msgstr ""

#: src/network/bridge_driver.c:1231
#, c-format
msgid "failed to add iptables rule to allow cross bridge traffic on '%s'"
msgstr ""

#: src/network/bridge_driver.c:1389
msgid "Reloading iptables rules"
msgstr ""

#: src/network/bridge_driver.c:1442
#, c-format
msgid "cannot write to %s to disable IPv6 on bridge %s"
msgstr ""

#: src/network/bridge_driver.c:1464
#, c-format
msgid "cannot disable %s"
msgstr ""

#: src/network/bridge_driver.c:1480
#, c-format
msgid "cannot enable %s"
msgstr ""

#: src/network/bridge_driver.c:1573
#, fuzzy, c-format
msgid "Network is already in use by interface %s"
msgstr "區域已經啟動"

#: src/network/bridge_driver.c:1595
#, c-format
msgid "bridge '%s' has an invalid netmask or IP address"
msgstr ""

#: src/network/bridge_driver.c:1603
#, c-format
msgid "cannot set IP address on bridge '%s'"
msgstr ""

#: src/network/bridge_driver.c:1623
#, fuzzy
msgid "network is already active"
msgstr "區域已經啟動"

#: src/network/bridge_driver.c:1634
#, c-format
msgid "cannot create bridge '%s'"
msgstr ""

#: src/network/bridge_driver.c:1654
#, c-format
msgid "cannot create dummy tap device '%s' to set mac address on bridge '%s'"
msgstr ""

#: src/network/bridge_driver.c:1667
#, fuzzy, c-format
msgid "cannot set forward delay on bridge '%s'"
msgstr "無法從 %s 建立區域"

#: src/network/bridge_driver.c:1675
#, fuzzy, c-format
msgid "cannot set STP '%s' on bridge '%s'"
msgstr "無法開啟區域 %s"

#: src/network/bridge_driver.c:1707
#, fuzzy, c-format
msgid "failed to bring the bridge '%s' up"
msgstr "無法取得區域「%s」"

#: src/network/bridge_driver.c:1716
#, fuzzy
msgid "failed to enable IP forwarding"
msgstr "無法開啟要讀取的 %s"

#: src/network/bridge_driver.c:1734
#, fuzzy, c-format
msgid "Starting up network '%s'"
msgstr "無法取得網路「%s」"

#: src/network/bridge_driver.c:1806
#, fuzzy, c-format
msgid "Shutting down network '%s'"
msgstr "無法取得網路「%s」"

#: src/network/bridge_driver.c:1896 src/network/bridge_driver.c:2203
#: src/network/bridge_driver.c:2290 src/network/bridge_driver.c:2313
#: src/network/bridge_driver.c:2348 src/network/bridge_driver.c:2403
#: src/network/bridge_driver.c:2428
msgid "no network with matching uuid"
msgstr ""

#: src/network/bridge_driver.c:1919
#, c-format
msgid "no network with matching name '%s'"
msgstr ""

#: src/network/bridge_driver.c:2108
#, fuzzy, c-format
msgid "Creating network '%s'"
msgstr "無法取得網路「%s」"

#: src/network/bridge_driver.c:2163
msgid ""
"Multiple dhcp sections found. dhcp is supported only for a single IPv4 "
"address on each network"
msgstr ""

#: src/network/bridge_driver.c:2180
#, fuzzy, c-format
msgid "Defining network '%s'"
msgstr "定義網路。"

#: src/network/bridge_driver.c:2209
#, fuzzy
msgid "network is still active"
msgstr "區域還在執行中"

#: src/network/bridge_driver.c:2267
#, fuzzy, c-format
msgid "Undefining network '%s'"
msgstr "取消定義非作用中的網路"

#: src/network/bridge_driver.c:2319
#, fuzzy
msgid "network is not active"
msgstr "網路名稱"

#: src/network/bridge_driver.c:2371
#, fuzzy
msgid "no network with matching id"
msgstr "XML 格式的網路資訊"

#: src/network/bridge_driver.c:2377 src/test/test_driver.c:3180
#, c-format
msgid "network '%s' does not have a bridge name."
msgstr ""

#: src/network/bridge_driver.c:2434
#, fuzzy
msgid "cannot set autostart for transient network"
msgstr "自動啟動網路"

#: src/network/bridge_driver.c:2449
#, c-format
msgid "cannot create autostart directory '%s'"
msgstr ""

#: src/network/bridge_driver.c:2456 src/storage/storage_driver.c:1033
#, fuzzy, c-format
msgid "Failed to create symlink '%s' to '%s'"
msgstr "無法將區域 %s 存至 %s"

#: src/node_device/node_device_driver.c:88
#, c-format
msgid "cannot resolve driver link %s"
msgstr ""

#: src/node_device/node_device_driver.c:267
#: src/node_device/node_device_driver.c:296
#: src/node_device/node_device_driver.c:331
#: src/node_device/node_device_driver.c:362 src/test/test_driver.c:4930
#: src/test/test_driver.c:4956 src/test/test_driver.c:4992
#: src/test/test_driver.c:5023
#, c-format
msgid "no node device with matching name '%s'"
msgstr ""

#: src/node_device/node_device_driver.c:307 src/test/test_driver.c:4967
#, fuzzy
msgid "no parent for this device"
msgstr "找不到裝置的目標資訊"

#: src/node_device/node_device_driver.c:408
#, c-format
msgid "Invalid vport operation (%d)"
msgstr ""

#: src/node_device/node_device_driver.c:438
#, c-format
msgid "No vport operation path found for host%d"
msgstr ""

#: src/node_device/node_device_driver.c:459
#, c-format
msgid "Write of '%s' to '%s' during vport create/delete failed"
msgstr ""

#: src/node_device/node_device_driver.c:468
#, fuzzy
msgid "Vport operation complete"
msgstr "操作失敗"

#: src/node_device/node_device_driver.c:481
#, fuzzy
msgid "Could not get current time"
msgstr "無法連上 Xen Store"

#: src/node_device/node_device_hal.c:721
msgid "libhal_ctx_new returned NULL"
msgstr ""

#: src/node_device/node_device_hal.c:726
msgid "dbus_bus_get failed"
msgstr ""

#: src/node_device/node_device_hal.c:736
msgid "libhal_ctx_set_dbus_connection failed"
msgstr ""

#: src/node_device/node_device_hal.c:740
msgid "libhal_ctx_init failed, haldaemon is probably not running"
msgstr ""

#: src/node_device/node_device_hal.c:754
msgid "dbus_connection_set_watch_functions failed"
msgstr ""

#: src/node_device/node_device_hal.c:775
msgid "setting up HAL callbacks failed"
msgstr ""

#: src/node_device/node_device_hal.c:781 src/node_device/node_device_hal.c:842
msgid "libhal_get_all_devices failed"
msgstr ""

#: src/node_device/node_device_hal.c:794 src/qemu/qemu_migration.c:118
#: src/qemu/qemu_migration.c:165 src/qemu/qemu_migration.c:195
#: src/qemu/qemu_migration.c:216 src/qemu/qemu_migration.c:222
#, c-format
msgid "%s: %s"
msgstr ""

#: src/node_device/node_device_linux_sysfs.c:60
#, fuzzy, c-format
msgid "Failed to open WWN path '%s' for reading"
msgstr "無法開啟要讀取的 %s"

#: src/node_device/node_device_linux_sysfs.c:139
#, fuzzy, c-format
msgid "Failed to read WWPN for host%d"
msgstr "無法讀取插槽 %d\n"

#: src/node_device/node_device_linux_sysfs.c:148
#, fuzzy, c-format
msgid "Failed to read WWNN for host%d"
msgstr "無法讀取插槽 %d\n"

#: src/node_device/node_device_linux_sysfs.c:218
#: src/node_device/node_device_udev.c:82
#, fuzzy, c-format
msgid "Failed to convert '%s' to unsigned int"
msgstr "無法開啟要讀取的 %s"

#: src/node_device/node_device_linux_sysfs.c:285
#, fuzzy, c-format
msgid "Failed to resolve device link '%s': '%s'"
msgstr "無法暫停區域 %s"

#: src/node_device/node_device_linux_sysfs.c:293
#, fuzzy
msgid "Failed to allocate memory for PCI device name"
msgstr "無法分配節點"

#: src/node_device/node_device_linux_sysfs.c:298
#, fuzzy, c-format
msgid "Failed to parse PCI config address '%s'"
msgstr "無法解析設定檔 %s"

#: src/node_device/node_device_linux_sysfs.c:378
#, c-format
msgid "Failed to get SR IOV function from device link '%s'"
msgstr ""

#: src/node_device/node_device_udev.c:64
#, c-format
msgid "Failed to convert '%s' to unsigned long long"
msgstr ""

#: src/node_device/node_device_udev.c:99
#, fuzzy, c-format
msgid "Failed to convert '%s' to int"
msgstr "無法暫停區域 %s"

#: src/node_device/node_device_udev.c:129
#, c-format
msgid ""
"Failed to allocate memory for property value for property key '%s' on device "
"with sysname '%s'"
msgstr ""

#: src/node_device/node_device_udev.c:218
#, c-format
msgid ""
"Failed to allocate memory for sysfs attribute value for sysfs attribute '%s' "
"on device with sysname '%s'"
msgstr ""

#: src/node_device/node_device_udev.c:336
#, c-format
msgid "Buffer error when generating device name for device with sysname '%s'"
msgstr ""

#: src/node_device/node_device_udev.c:648
#, c-format
msgid "SCSI host found, but its udev name '%s' does not begin with 'host'"
msgstr ""

#: src/node_device/node_device_udev.c:816
#, c-format
msgid "Failed to process SCSI device with sysfs path '%s'"
msgstr ""

#: src/node_device/node_device_udev.c:1188
#, fuzzy, c-format
msgid "Unknown device type %d"
msgstr "未知的作業系統類型 %s"

#: src/node_device/node_device_udev.c:1323
#: src/node_device/node_device_udev.c:1576
#, fuzzy, c-format
msgid "Failed to create device for '%s'"
msgstr "無法從 %s 建立區域"

#: src/node_device/node_device_udev.c:1375
#, c-format
msgid "udev scan devices returned %d"
msgstr ""

#: src/node_device/node_device_udev.c:1446
#, c-format
msgid ""
"File descriptor returned by udev %d does not match node device file "
"descriptor %d"
msgstr ""

#: src/node_device/node_device_udev.c:1453
msgid "udev_monitor_receive_device returned NULL"
msgstr ""

#: src/node_device/node_device_udev.c:1489
#, fuzzy, c-format
msgid "Failed to get udev device for syspath '%s' or '%s'"
msgstr "無法從 %s 建立區域"

#: src/node_device/node_device_udev.c:1605
#, fuzzy, c-format
msgid "Failed to initialize libpciaccess: %s"
msgstr "無法為 S-Expr 製作序列號：%s"

#: src/node_device/node_device_udev.c:1628
msgid "Failed to initialize mutex for driverState"
msgstr ""

#: src/node_device/node_device_udev.c:1650
msgid "udev_monitor_new_from_netlink returned NULL"
msgstr ""

#: src/nodeinfo.c:90 src/nodeinfo.c:136 src/nodeinfo.c:342
#: src/uml/uml_driver.c:2047 src/util/pci.c:1346 src/util/util.c:484
#, fuzzy, c-format
msgid "cannot open %s"
msgstr "從 %s 回復區域\n"

#: src/nodeinfo.c:95 src/nodeinfo.c:142
#, fuzzy, c-format
msgid "cannot read from %s"
msgstr "區域 %s 建立自 %s\n"

#: src/nodeinfo.c:100
#, fuzzy, c-format
msgid "could not convert '%s' to an integer"
msgstr "無法連上 Xen Store"

#: src/nodeinfo.c:205
msgid "parsing cpuinfo processor"
msgstr ""

#: src/nodeinfo.c:217
msgid "parsing cpuinfo cpu MHz"
msgstr ""

#: src/nodeinfo.c:244
#, fuzzy
msgid "no cpus found"
msgstr "節點的處理器 numa 節點"

#: src/nodeinfo.c:257
#, fuzzy, c-format
msgid "cannot opendir %s"
msgstr "從 %s 回復區域\n"

#: src/nodeinfo.c:293
#, c-format
msgid "problem reading %s"
msgstr ""

#: src/nodeinfo.c:303
#, fuzzy
msgid "no sockets found"
msgstr "結點的處理器插槽"

#: src/nodeinfo.c:308
#, fuzzy
msgid "no threads found"
msgstr "節點的處理器執行續"

#: src/nodeinfo.c:358
msgid "node info not implemented on this platform"
msgstr ""

#: src/nodeinfo.c:452 src/nodeinfo.c:490
msgid "NUMA not supported on this host"
msgstr ""

#: src/nodeinfo.c:458
#, c-format
msgid "start cell %d out of range (0-%d)"
msgstr ""

#: src/nodeinfo.c:470
#, fuzzy, c-format
msgid "Failed to query NUMA free memory for node: %d"
msgstr "已使用的記憶體："

#: src/nodeinfo.c:498
#, fuzzy
msgid "Failed to query NUMA free memory"
msgstr "已使用的記憶體："

#: src/nodeinfo.c:519 src/nodeinfo.c:526
msgid "NUMA memory information not available on this platform"
msgstr ""

#: src/nwfilter/nwfilter_driver.c:231 src/nwfilter/nwfilter_driver.c:376
#: src/nwfilter/nwfilter_driver.c:421
#, fuzzy
msgid "no nwfilter with matching uuid"
msgstr "XML 格式的網路資訊"

#: src/nwfilter/nwfilter_driver.c:257
#, fuzzy, c-format
msgid "no nwfilter with matching name '%s'"
msgstr "XML 格式的網路資訊"

#: src/nwfilter/nwfilter_driver.c:383
msgid "nwfilter is in use"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:162
#, c-format
msgid "cannot find value for '%s'"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:169
#, c-format
msgid "Buffer to small to print MAC address '%s' into"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:203
msgid "buffer too small for IP address"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:217
msgid "buffer too small for IPv6 address"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:228
msgid "Buffer too small for MAC address"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:240
#: src/nwfilter/nwfilter_ebiptables_driver.c:260
msgid "Buffer too small for uint8 type"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:250
msgid "Buffer too small for uint16 type"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:267
#, c-format
msgid "Unhandled datatype %x"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:1171
#, c-format
msgid "cannot create rule since %s tool is missing."
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:1888
msgid "cannot create rule since ebtables tool is missing."
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:2406
#: src/nwfilter/nwfilter_ebiptables_driver.c:2430
#, c-format
msgid "'%s' protocol not support for net type '%s'"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:2446
msgid "illegal protocol type"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:2511
msgid "cannot create temporary file"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:2518
msgid "cannot change permissions on temp. file"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:2527
#: src/nwfilter/nwfilter_ebiptables_driver.c:2536
#, fuzzy
msgid "cannot write string to file"
msgstr "無法寫入設定檔"

#: src/nwfilter/nwfilter_ebiptables_driver.c:2992
#: src/nwfilter/nwfilter_ebiptables_driver.c:3084
#: src/nwfilter/nwfilter_ebiptables_driver.c:3195
msgid "cannot create rules since ebtables tool is missing."
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:3050
#: src/nwfilter/nwfilter_ebiptables_driver.c:3168
#: src/nwfilter/nwfilter_ebiptables_driver.c:3239
msgid "Some rules could not be created."
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:3308
#, c-format
msgid "To enable ip%stables filtering for the VM do 'echo 1 > %s'"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:3512
#, c-format
msgid "Some rules could not be created for interface %s."
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:3632
msgid "error while executing CLI commands"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:3767
msgid "essential tools to support ip(6)tables firewalls could not be located"
msgstr ""

#: src/nwfilter/nwfilter_ebiptables_driver.c:3776
msgid "firewall tools were not found or cannot be used"
msgstr ""

#: src/nwfilter/nwfilter_gentech_driver.c:155
msgid "Could not add variable 'MAC' to hashmap"
msgstr ""

#: src/nwfilter/nwfilter_gentech_driver.c:165
msgid "Could not add variable 'IP' to hashmap"
msgstr ""

#: src/nwfilter/nwfilter_gentech_driver.c:360
#: src/nwfilter/nwfilter_gentech_driver.c:451
#: src/nwfilter/nwfilter_gentech_driver.c:731
#, c-format
msgid "Filter '%s' is in use."
msgstr ""

#: src/nwfilter/nwfilter_gentech_driver.c:409
#: src/nwfilter/nwfilter_gentech_driver.c:495
#, c-format
msgid "referenced filter '%s' is missing"
msgstr ""

#: src/nwfilter/nwfilter_gentech_driver.c:713
#: src/nwfilter/nwfilter_gentech_driver.c:935
#: src/nwfilter/nwfilter_gentech_driver.c:961
#: src/nwfilter/nwfilter_gentech_driver.c:985
#, c-format
msgid "Could not get access to ACL tech driver '%s'"
msgstr ""

#: src/nwfilter/nwfilter_gentech_driver.c:724
#, fuzzy, c-format
msgid "Could not find filter '%s'"
msgstr "無法連上 %s"

#: src/nwfilter/nwfilter_learnipaddr.c:154
#, fuzzy
msgid "mutex initialization failed"
msgstr "操作失敗"

#: src/nwfilter/nwfilter_learnipaddr.c:161
#, c-format
msgid "interface name %s does not fit into buffer "
msgstr ""

#: src/nwfilter/nwfilter_learnipaddr.c:651
#, c-format
msgid "encountered an error on interface %s index %d"
msgstr ""

#: src/nwfilter/nwfilter_learnipaddr.c:715
msgid ""
"IP parameter must be provided since snooping the IP address does not work "
"possibly due to missing tools"
msgstr ""

#: src/nwfilter/nwfilter_learnipaddr.c:743
#, c-format
msgid "Destination buffer for ifname ('%s') not large enough"
msgstr ""

#: src/nwfilter/nwfilter_learnipaddr.c:751
#, c-format
msgid "Destination buffer for linkdev ('%s') not large enough"
msgstr ""

#: src/nwfilter/nwfilter_learnipaddr.c:803
msgid ""
"IP parameter must be given since libvirt was not compiled with IP address "
"learning support"
msgstr ""

#: src/openvz/openvz_conf.c:135
#, fuzzy
msgid "Could not extract vzctl version"
msgstr "無法連上 hypervisor"

#: src/openvz/openvz_conf.c:201
#, c-format
msgid "Could not read 'IP_ADDRESS' from config for container %d"
msgstr ""

#: src/openvz/openvz_conf.c:233
#, c-format
msgid "Could not read 'NETIF' from config for container %d"
msgstr ""

#: src/openvz/openvz_conf.c:259
#, fuzzy
msgid "Too long network device name"
msgstr "解析區域的檔名"

#: src/openvz/openvz_conf.c:268
#, c-format
msgid "Network ifname %s too long for destination"
msgstr ""

#: src/openvz/openvz_conf.c:276
msgid "Too long bridge device name"
msgstr ""

#: src/openvz/openvz_conf.c:285
#, c-format
msgid "Bridge name %s too long for destination"
msgstr ""

#: src/openvz/openvz_conf.c:293
#, fuzzy
msgid "Wrong length MAC address"
msgstr "無效的參數，於 %s"

#: src/openvz/openvz_conf.c:298
#, c-format
msgid "MAC address %s too long for destination"
msgstr ""

#: src/openvz/openvz_conf.c:303
#, fuzzy
msgid "Wrong MAC address"
msgstr "無效的參數，於 %s"

#: src/openvz/openvz_conf.c:373
#, c-format
msgid "Could not read 'OSTEMPLATE' from config for container %d"
msgstr ""

#: src/openvz/openvz_conf.c:387
#, c-format
msgid "Could not read 'VE_PRIVATE' from config for container %d"
msgstr ""

#: src/openvz/openvz_conf.c:461 src/openvz/openvz_conf.c:1021
msgid "Failed to parse vzlist output"
msgstr ""

#: src/openvz/openvz_conf.c:500
msgid "UUID in config file malformed"
msgstr ""

#: src/openvz/openvz_conf.c:512
#, fuzzy, c-format
msgid "Could not read config for container %d"
msgstr "無法讀取設定檔 %s"

#: src/openvz/openvz_conf.c:877
#, fuzzy, c-format
msgid "invalid uuid %s"
msgstr "無效的參數，於 %s"

#: src/openvz/openvz_conf.c:983
#, fuzzy
msgid "Failed to scan configuration directory"
msgstr "無法讀取設定檔"

#: src/openvz/openvz_driver.c:112
#, fuzzy
msgid "Container is not defined"
msgstr "區域 %s 已經取消定義\n"

#: src/openvz/openvz_driver.c:157 src/openvz/openvz_driver.c:784
#, fuzzy, c-format
msgid "Could not put argument to %s"
msgstr "無法連上 %s"

#: src/openvz/openvz_driver.c:175
msgid "only one filesystem supported"
msgstr ""

#: src/openvz/openvz_driver.c:184
msgid "filesystem is not of type 'template' or 'mount'"
msgstr ""

#: src/openvz/openvz_driver.c:195
#, fuzzy
msgid "Could not convert domain name to VEID"
msgstr "將區域名稱或 ID 轉為 UUID"

#: src/openvz/openvz_driver.c:201
msgid "Could not copy default config"
msgstr ""

#: src/openvz/openvz_driver.c:207
msgid "Could not set the source dir for the filesystem"
msgstr ""

#: src/openvz/openvz_driver.c:214
msgid "Error creating command for container"
msgstr ""

#: src/openvz/openvz_driver.c:363
#, c-format
msgid "cannot read cputime for domain %d"
msgstr ""

#: src/openvz/openvz_driver.c:566 src/openvz/openvz_driver.c:604
#: src/vmware/vmware_driver.c:327 src/vmware/vmware_driver.c:380
#: src/vmware/vmware_driver.c:475
#, fuzzy
msgid "domain is not in running state"
msgstr "區域還在執行中"

#: src/openvz/openvz_driver.c:684
msgid "Container ID is not specified"
msgstr ""

#: src/openvz/openvz_driver.c:720
msgid "Could not generate eth name for container"
msgstr ""

#: src/openvz/openvz_driver.c:732
msgid "Could not generate veth name"
msgstr ""

#: src/openvz/openvz_driver.c:813
#, fuzzy
msgid "Could not configure network"
msgstr "無法連上 %s"

#: src/openvz/openvz_driver.c:824
msgid "cannot replace NETIF config"
msgstr ""

#: src/openvz/openvz_driver.c:862
#, c-format
msgid "Already an OPENVZ VM active with the id '%s'"
msgstr ""

#: src/openvz/openvz_driver.c:873 src/openvz/openvz_driver.c:961
#, fuzzy
msgid "Error creating initial configuration"
msgstr "分配設定"

#: src/openvz/openvz_driver.c:881 src/openvz/openvz_driver.c:967
#, fuzzy
msgid "Could not set UUID"
msgstr "無法連上 %s"

#: src/openvz/openvz_driver.c:890 src/vbox/vbox_tmpl.c:4786
msgid "current vcpu count must equal maximum"
msgstr ""

#: src/openvz/openvz_driver.c:896 src/openvz/openvz_driver.c:987
#, fuzzy
msgid "Could not set number of virtual cpu"
msgstr "改變虛擬處理器的數量"

#: src/openvz/openvz_driver.c:904
#, fuzzy
msgid "Could not set memory size"
msgstr "無法連上 %s"

#: src/openvz/openvz_driver.c:948
#, c-format
msgid "Already an OPENVZ VM defined with the id '%s'"
msgstr ""

#: src/openvz/openvz_driver.c:1020
msgid "no domain with matching id"
msgstr ""

#: src/openvz/openvz_driver.c:1026 src/vmware/vmware_driver.c:212
msgid "domain is not in shutoff state"
msgstr ""

#: src/openvz/openvz_driver.c:1071 src/qemu/qemu_driver.c:3686
#: src/uml/uml_driver.c:1656
#, fuzzy
msgid "cannot delete active domain"
msgstr "非作用中區域的名稱"

#: src/openvz/openvz_driver.c:1143
#, fuzzy
msgid "Could not read container config"
msgstr "無法連上 %s"

#: src/openvz/openvz_driver.c:1165 src/qemu/qemu_driver.c:947
#, fuzzy, c-format
msgid "unknown type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/openvz/openvz_driver.c:1174 src/openvz/openvz_driver.c:1218
#, c-format
msgid "unsupported flags (0x%x)"
msgstr ""

#: src/openvz/openvz_driver.c:1234
msgid "VCPUs should be >= 1"
msgstr ""

#: src/openvz/openvz_driver.c:1285
#, c-format
msgid "unexpected OpenVZ URI path '%s', try openvz:///system"
msgstr ""

#: src/openvz/openvz_driver.c:1292
msgid "OpenVZ control file /proc/vz does not exist"
msgstr ""

#: src/openvz/openvz_driver.c:1298
msgid "OpenVZ control file /proc/vz is not accessible"
msgstr ""

#: src/openvz/openvz_driver.c:1381 src/openvz/openvz_driver.c:1433
#, fuzzy, c-format
msgid "Could not exec %s"
msgstr "無法連上 %s"

#: src/openvz/openvz_driver.c:1392 src/openvz/openvz_driver.c:1443
#, fuzzy, c-format
msgid "Could not parse VPS ID %s"
msgstr "無法連上 %s"

#: src/openvz/openvz_driver.c:1401 src/openvz/openvz_driver.c:1455
#, fuzzy
msgid "failed to close file"
msgstr "無法開啟檔案"

#: src/phyp/phyp_driver.c:418
#, c-format
msgid "Cannot parse number from '%s'"
msgstr ""

#: src/phyp/phyp_driver.c:450 src/phyp/phyp_driver.c:456
#, fuzzy
msgid "Unable to write information to local file."
msgstr "無法寫入設定檔"

#: src/phyp/phyp_driver.c:462 src/phyp/phyp_driver.c:773
#, fuzzy, c-format
msgid "Could not close %s"
msgstr "無法連上 %s"

#: src/phyp/phyp_driver.c:535
#, fuzzy, c-format
msgid "Failed to read from %s"
msgstr "無法從 %s 建立區域"

#: src/phyp/phyp_driver.c:827
#, fuzzy
msgid "Unable to determine number of domains."
msgstr "無法繼續區域 %s"

#: src/phyp/phyp_driver.c:981 src/phyp/phyp_driver.c:1062
#, fuzzy
msgid "No authentication callback provided."
msgstr "操作失敗"

#: src/phyp/phyp_driver.c:1002
#, c-format
msgid "Error while getting %s address info"
msgstr ""

#: src/phyp/phyp_driver.c:1019
#, fuzzy, c-format
msgid "Failed to connect to %s"
msgstr "無法連上 %s"

#: src/phyp/phyp_driver.c:1039
msgid "Failure establishing SSH session."
msgstr ""

#: src/phyp/phyp_driver.c:1081
#, fuzzy
msgid "Authentication failed"
msgstr "操作失敗"

#: src/phyp/phyp_driver.c:1136
msgid "Missing server name in phyp:// URI"
msgstr ""

#: src/phyp/phyp_driver.c:1185
msgid "Error parsing 'path'. Invalid characters."
msgstr ""

#: src/phyp/phyp_driver.c:1192
msgid "Error while opening SSH session."
msgstr ""

#: src/phyp/phyp_driver.c:1729 src/phyp/phyp_driver.c:1796
#: src/phyp/phyp_driver.c:2029
msgid "Unable to get VIOS profile name."
msgstr ""

#: src/phyp/phyp_driver.c:1791 src/phyp/phyp_driver.c:1986
#, fuzzy
msgid "Unable to get VIOS name"
msgstr "無法取得 hypervisor 類型"

#: src/phyp/phyp_driver.c:1801
#, fuzzy
msgid "Unable to get free slot number"
msgstr "無法取得 hypervisor 類型"

#: src/phyp/phyp_driver.c:1996 src/phyp/phyp_driver.c:2000
msgid "Unable to create new virtual adapter"
msgstr ""

#: src/phyp/phyp_driver.c:2121
msgid ""
"Possibly you don't have IBM Tools installed in your LPAR.Contact your "
"support to enable this feature."
msgstr ""

#: src/phyp/phyp_driver.c:2336
#, fuzzy, c-format
msgid "Unable to create Volume: %s"
msgstr "無法從 %s 建立區域"

#: src/phyp/phyp_driver.c:2391 src/phyp/phyp_driver.c:2686
#: src/phyp/phyp_driver.c:3241
msgid "Unable to determine storage pool's name."
msgstr ""

#: src/phyp/phyp_driver.c:2396 src/phyp/phyp_driver.c:3246
msgid "Unable to determine storage pool's uuid."
msgstr ""

#: src/phyp/phyp_driver.c:2402 src/phyp/phyp_driver.c:3252
msgid "Unable to determine storage pools's size."
msgstr ""

#: src/phyp/phyp_driver.c:2415 src/phyp/phyp_driver.c:3265
msgid "Unable to determine storage pools's source adapter."
msgstr ""

#: src/phyp/phyp_driver.c:2420
msgid "Error parsing volume XML."
msgstr ""

#: src/phyp/phyp_driver.c:2426
msgid "StoragePool name already exists."
msgstr ""

#: src/phyp/phyp_driver.c:2434
msgid "Key must be empty, Power Hypervisor will create one for you."
msgstr ""

#: src/phyp/phyp_driver.c:2439
msgid "Capacity cannot be empty."
msgstr ""

#: src/phyp/phyp_driver.c:2657
msgid "Unable to determine storage sp's name."
msgstr ""

#: src/phyp/phyp_driver.c:2662
msgid "Unable to determine storage sp's uuid."
msgstr ""

#: src/phyp/phyp_driver.c:2667
msgid "Unable to determine storage sps's size."
msgstr ""

#: src/phyp/phyp_driver.c:2679
msgid "Unable to determine storage sps's source adapter."
msgstr ""

#: src/phyp/phyp_driver.c:2691
msgid "Unable to determine volume's key."
msgstr ""

#: src/phyp/phyp_driver.c:2947 src/phyp/phyp_driver.c:2996
#, fuzzy, c-format
msgid "Unable to create Storage Pool: %s"
msgstr "無法從 %s 建立網路"

#: src/phyp/phyp_driver.c:3536
#, fuzzy
msgid "Unable to determine domain's name."
msgstr "無法從 %s 定義區域"

#: src/phyp/phyp_driver.c:3541
msgid "Unable to generate random uuid."
msgstr ""

#: src/phyp/phyp_driver.c:3547
#, fuzzy
msgid "Unable to determine domain's max memory."
msgstr "無法從 %s 定義區域"

#: src/phyp/phyp_driver.c:3553
#, fuzzy
msgid "Unable to determine domain's memory."
msgstr "無法從 %s 定義區域"

#: src/phyp/phyp_driver.c:3559
#, fuzzy
msgid "Unable to determine domain's CPU."
msgstr "無法為區域 %s 取消定義"

#: src/phyp/phyp_driver.c:3732
msgid ""
"Field \"<memory>\" on the domain XML file is missing or has invalid value."
msgstr ""

#: src/phyp/phyp_driver.c:3739
msgid ""
"Field \"<currentMemory>\" on the domain XML file is missing or has invalid "
"value."
msgstr ""

#: src/phyp/phyp_driver.c:3746
msgid "Domain XML must contain at least one \"<disk>\" element."
msgstr ""

#: src/phyp/phyp_driver.c:3752
msgid "Field \"<src>\" under \"<disk>\" on the domain XML file is missing."
msgstr ""

#: src/phyp/phyp_driver.c:3775
#, c-format
msgid "Unable to create LPAR. Reason: '%s'"
msgstr ""

#: src/phyp/phyp_driver.c:3780
#, fuzzy
msgid "Unable to add LPAR to the table"
msgstr "無法為連線雜湊表新增區域"

#: src/phyp/phyp_driver.c:3885
msgid "You are trying to set a number of CPUs bigger than the max possible."
msgstr ""

#: src/phyp/phyp_driver.c:3916
msgid ""
"Possibly you don't have IBM Tools installed in your LPAR. Contact your "
"support to enable this feature."
msgstr ""

#: src/qemu/qemu_bridge_filter.c:43
#, c-format
msgid "failed to add ebtables rule to set default policy to drop on '%s'"
msgstr ""

#: src/qemu/qemu_bridge_filter.c:59
#, c-format
msgid "cannot filter mac addresses on bridge '%s'"
msgstr ""

#: src/qemu/qemu_bridge_filter.c:79 src/qemu/qemu_bridge_filter.c:100
#, c-format
msgid "failed to add ebtables rule to allow routing to '%s'"
msgstr ""

#: src/qemu/qemu_capabilities.c:182 src/qemu/qemu_capabilities.c:1146
#: src/qemu/qemu_capabilities.c:1229
#, c-format
msgid "Cannot find QEMU binary %s"
msgstr ""

#: src/qemu/qemu_capabilities.c:1048
#, c-format
msgid "cannot parse %s version number in '%s'"
msgstr ""

#: src/qemu/qemu_capabilities.c:1223
#, c-format
msgid "Cannot find suitable emulator for %s"
msgstr ""

#: src/qemu/qemu_cgroup.c:78
#, c-format
msgid "Unable to allow access for disk path %s"
msgstr ""

#: src/qemu/qemu_cgroup.c:119
#, fuzzy, c-format
msgid "Unable to deny access for disk path %s"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_cgroup.c:161 src/qemu/qemu_migration.c:1335
#, fuzzy, c-format
msgid "Unable to allow device %s for %s"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_cgroup.c:183
#, fuzzy, c-format
msgid "Unable to allow device %s"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_cgroup.c:208
#, fuzzy, c-format
msgid "Unable to create cgroup for %s"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_cgroup.c:224
#, fuzzy, c-format
msgid "Unable to deny all devices for %s"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_cgroup.c:239
msgid "unable to allow /dev/pts/ devices"
msgstr ""

#: src/qemu/qemu_cgroup.c:254
msgid "unable to allow /dev/snd/ devices"
msgstr ""

#: src/qemu/qemu_cgroup.c:266
#, fuzzy, c-format
msgid "unable to allow device %s"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_cgroup.c:302
#, fuzzy, c-format
msgid "Unable to set io weight for domain %s"
msgstr "無法開啟區域 %s"

#: src/qemu/qemu_cgroup.c:308
msgid "Block I/O tuning is not available on this host"
msgstr ""

#: src/qemu/qemu_cgroup.c:346
msgid "Memory cgroup is not available on this host"
msgstr ""

#: src/qemu/qemu_cgroup.c:355
#, fuzzy, c-format
msgid "Unable to set io cpu shares for domain %s"
msgstr "無法開啟區域 %s"

#: src/qemu/qemu_cgroup.c:361
msgid "CPU tuning is not available on this host"
msgstr ""

#: src/qemu/qemu_cgroup.c:392 src/qemu/qemu_driver.c:3770
#: src/qemu/qemu_driver.c:3946 src/qemu/qemu_hotplug.c:867
#: src/qemu/qemu_hotplug.c:1125 src/qemu/qemu_hotplug.c:1223
#: src/qemu/qemu_migration.c:1326
#, fuzzy, c-format
msgid "Unable to find cgroup for %s"
msgstr "無法為網路 %s 取消定義"

#: src/qemu/qemu_cgroup.c:415
#, fuzzy, c-format
msgid "unable to find cgroup for domain %s"
msgstr "無法重新啟動區域 %s"

#: src/qemu/qemu_cgroup.c:423
#, fuzzy, c-format
msgid "unable to add domain %s task %d to cgroup"
msgstr "無法將區域 %s 標示為 %s 自動啟動"

#: src/qemu/qemu_command.c:140 src/qemu/qemu_command.c:286
#, c-format
msgid "failed to add ebtables rule to allow MAC address on  '%s'"
msgstr ""

#: src/qemu/qemu_command.c:164
msgid "No support for macvtap device"
msgstr ""

#: src/qemu/qemu_command.c:199
#, fuzzy, c-format
msgid "Network '%s' is not active."
msgstr "網路 %s 已開啟\n"

#: src/qemu/qemu_command.c:225
#, fuzzy, c-format
msgid "Network type %d is not supported"
msgstr "網路 %s 已開啟\n"

#: src/qemu/qemu_command.c:260 src/uml/uml_conf.c:151
#, c-format
msgid "Failed to add tap interface to bridge. %s is not a bridge device"
msgstr ""

#: src/qemu/qemu_command.c:265 src/uml/uml_conf.c:155
msgid ""
"Failed to add tap interface to bridge. Your kernel is missing the 'tun' "
"module or CONFIG_TUN, or you need to add the /dev/net/tun device node."
msgstr ""

#: src/qemu/qemu_command.c:271 src/uml/uml_conf.c:160
#, fuzzy, c-format
msgid "Failed to add tap interface to bridge '%s'"
msgstr "無法取得節點資訊"

#: src/qemu/qemu_command.c:275 src/uml/uml_conf.c:164
#, fuzzy, c-format
msgid "Failed to add tap interface '%s' to bridge '%s'"
msgstr "無法取得節點資訊"

#: src/qemu/qemu_command.c:327
#, fuzzy
msgid "vhost-net is not supported with this QEMU binary"
msgstr "不支援 hypervisor"

#: src/qemu/qemu_command.c:338
msgid "vhost-net is only supported for virtio network interfaces"
msgstr ""

#: src/qemu/qemu_command.c:354
msgid "vhost-net was requested for an interface, but is unavailable"
msgstr ""

#: src/qemu/qemu_command.c:435
#, c-format
msgid "cannot convert disk '%s' to bus/device index"
msgstr ""

#: src/qemu/qemu_command.c:464
#, c-format
msgid "Unsupported disk name mapping for bus '%s'"
msgstr ""

#: src/qemu/qemu_command.c:528
msgid "Unable to determine device index for network device"
msgstr ""

#: src/qemu/qemu_command.c:555
msgid "Unable to determine device index for hostdevwork device"
msgstr ""

#: src/qemu/qemu_command.c:682
msgid "Only PCI domain 0 and bus 0 are available"
msgstr ""

#: src/qemu/qemu_command.c:792
#, c-format
msgid "unable to reserve PCI address %s"
msgstr ""

#: src/qemu/qemu_command.c:909
msgid "No more available PCI addresses"
msgstr ""

#: src/qemu/qemu_command.c:966
msgid "Primary IDE controller must have PCI address 0:0:1.1"
msgstr ""

#: src/qemu/qemu_command.c:997
msgid "Primary video card must have PCI address 0:0:2.0"
msgstr ""

#: src/qemu/qemu_command.c:1136
msgid "Only PCI device addresses with domain=0 are supported"
msgstr ""

#: src/qemu/qemu_command.c:1141
msgid "Only PCI device addresses with bus=0 are supported"
msgstr ""

#: src/qemu/qemu_command.c:1146
msgid "Only PCI device addresses with function=0 are supported"
msgstr ""

#: src/qemu/qemu_command.c:1173
#, c-format
msgid "driver serial '%s' contains unsafe characters"
msgstr ""

#: src/qemu/qemu_command.c:1194 src/qemu/qemu_command.c:1409
#: src/qemu/qemu_command.c:3351 src/uml/uml_conf.c:451
#, fuzzy, c-format
msgid "unsupported disk type '%s'"
msgstr "無預期的資料「%s」"

#: src/qemu/qemu_command.c:1202
msgid "unexpected address type for scsi disk"
msgstr ""

#: src/qemu/qemu_command.c:1211
msgid "SCSI controller only supports 1 bus"
msgstr ""

#: src/qemu/qemu_command.c:1221
#, fuzzy
msgid "unexpected address type for ide disk"
msgstr "無預期的 mime 類型"

#: src/qemu/qemu_command.c:1227 src/qemu/qemu_command.c:1243
#, c-format
msgid "Only 1 %s controller is supported"
msgstr ""

#: src/qemu/qemu_command.c:1237
#, fuzzy
msgid "unexpected address type for fdc disk"
msgstr "無預期的 mime 類型"

#: src/qemu/qemu_command.c:1249
#, c-format
msgid "Only 1 %s bus is supported"
msgstr ""

#: src/qemu/qemu_command.c:1274 src/qemu/qemu_command.c:3361
#, c-format
msgid "unsupported disk driver type for '%s'"
msgstr ""

#: src/qemu/qemu_command.c:1280 src/qemu/qemu_command.c:3367
msgid "cannot create virtual FAT disks in read-write mode"
msgstr ""

#: src/qemu/qemu_command.c:1292 src/qemu/qemu_command.c:3379
msgid "NBD accepts only one host"
msgstr ""

#: src/qemu/qemu_command.c:1380
#, fuzzy
msgid "disk aio mode not supported with this QEMU binary"
msgstr "不支援 hypervisor"

#: src/qemu/qemu_command.c:1436
#, c-format
msgid "unsupported disk bus '%s' with device setup"
msgstr ""

#: src/qemu/qemu_command.c:1464
msgid "only supports mount filesystem type"
msgstr ""

#: src/qemu/qemu_command.c:1500
msgid "can only passthrough directories"
msgstr ""

#: src/qemu/qemu_command.c:1561
#, fuzzy, c-format
msgid "Unknown controller type: %s"
msgstr "未知的作業系統類型 %s"

#: src/qemu/qemu_command.c:1642
msgid "unrecognized virtio-net-pci 'tx' option"
msgstr ""

#: src/qemu/qemu_command.c:1647
#, fuzzy
msgid "virtio-net-pci 'tx' option not supported in this QEMU binary"
msgstr "不支援 hypervisor"

#: src/qemu/qemu_command.c:1789 src/qemu/qemu_command.c:4217
msgid "missing watchdog model"
msgstr ""

#: src/qemu/qemu_command.c:1867 src/qemu/qemu_command.c:4180
msgid "invalid sound model"
msgstr ""

#: src/qemu/qemu_command.c:1929
#, fuzzy
msgid "invalid video model"
msgstr "無效的參數，於 %s"

#: src/qemu/qemu_command.c:1939 src/qemu/qemu_command.c:4054
#, c-format
msgid "value for 'vram' must be less than '%u'"
msgstr ""

#: src/qemu/qemu_command.c:1982
#, fuzzy, c-format
msgid "Failed opening %s"
msgstr "無法暫停區域 %s"

#: src/qemu/qemu_command.c:2044 src/qemu/qemu_command.c:2066
#, fuzzy
msgid "USB host device is missing bus/device information"
msgstr "找不到裝置的資訊"

#: src/qemu/qemu_command.c:2154
#, fuzzy
msgid "spicevmc not supported in this QEMU binary"
msgstr "不支援 hypervisor"

#: src/qemu/qemu_command.c:2163
#, fuzzy, c-format
msgid "unsupported chardev '%s'"
msgstr "無預期的資料「%s」"

#: src/qemu/qemu_command.c:2279
msgid "virtio serial device has invalid address type"
msgstr ""

#: src/qemu/qemu_command.c:2296
#, fuzzy, c-format
msgid "Unsupported spicevmc target name '%s'"
msgstr "無預期的資料「%s」"

#: src/qemu/qemu_command.c:2437 src/qemu/qemu_command.c:2974
#: src/xenxs/xen_sxpr.c:2047 src/xenxs/xen_xm.c:1511
#, c-format
msgid "unsupported clock offset '%s'"
msgstr ""

#: src/qemu/qemu_command.c:2451
#, c-format
msgid "unsupported rtc timer track '%s'"
msgstr ""

#: src/qemu/qemu_command.c:2475
#, c-format
msgid "unsupported rtc timer tickpolicy '%s'"
msgstr ""

#: src/qemu/qemu_command.c:2524
#, fuzzy
msgid "CPU specification not supported by hypervisor"
msgstr "不支援 hypervisor"

#: src/qemu/qemu_command.c:2538
msgid "guest CPU is not compatible with host CPU"
msgstr ""

#: src/qemu/qemu_command.c:2650
msgid ""
"setting current vcpu count less than maximum is not supported with this QEMU "
"binary"
msgstr ""

#: src/qemu/qemu_command.c:2734
#, c-format
msgid "the QEMU binary %s does not support kqemu"
msgstr ""

#: src/qemu/qemu_command.c:2747
#, c-format
msgid "the QEMU binary %s does not support kvm"
msgstr ""

#: src/qemu/qemu_command.c:2758
#, c-format
msgid "the QEMU binary %s does not support %s"
msgstr ""

#: src/qemu/qemu_command.c:2805
msgid "hugetlbfs filesystem is not mounted"
msgstr ""

#: src/qemu/qemu_command.c:2810
msgid "hugepages are disabled by administrator config"
msgstr ""

#: src/qemu/qemu_command.c:2815
#, c-format
msgid "hugepage backing not supported by '%s'"
msgstr ""

#: src/qemu/qemu_command.c:2853
#, fuzzy, c-format
msgid "qemu emulator '%s' does not support xen"
msgstr "「%s」指令並不支援 --%s 選項"

#: src/qemu/qemu_command.c:2866
#, fuzzy, c-format
msgid "the QEMU binary %s does not support smbios settings"
msgstr "「%s」指令並不支援 --%s 選項"

#: src/qemu/qemu_command.c:2875 src/qemu/qemu_driver.c:926
msgid "Host SMBIOS information is not available"
msgstr ""

#: src/qemu/qemu_command.c:2884
#, c-format
msgid "Domain '%s' sysinfo are not available"
msgstr ""

#: src/qemu/qemu_command.c:2990
#, c-format
msgid "unsupported timer type (name) '%s'"
msgstr ""

#: src/qemu/qemu_command.c:3010 src/qemu/qemu_command.c:3021
#, c-format
msgid "unsupported rtc tickpolicy '%s'"
msgstr ""

#: src/qemu/qemu_command.c:3045 src/qemu/qemu_command.c:3054
#, c-format
msgid "unsupported pit tickpolicy '%s'"
msgstr ""

#: src/qemu/qemu_command.c:3076
msgid "pit timer is not supported"
msgstr ""

#: src/qemu/qemu_command.c:3132
msgid "hypervisor lacks deviceboot feature"
msgstr ""

#: src/qemu/qemu_command.c:3152 src/qemu/qemu_driver.c:3762
#, c-format
msgid "unsupported driver name '%s' for disk '%s'"
msgstr ""

#: src/qemu/qemu_command.c:3172
msgid "SATA is not supported with this QEMU binary"
msgstr ""

#: src/qemu/qemu_command.c:3226 src/qemu/qemu_command.c:3331
#, c-format
msgid "unsupported usb disk type for '%s'"
msgstr ""

#: src/qemu/qemu_command.c:3446
msgid "filesystem passthrough not supported by this QEMU"
msgstr ""

#: src/qemu/qemu_command.c:3570
msgid "this QEMU binary lacks multiple smartcard support"
msgstr ""

#: src/qemu/qemu_command.c:3581 src/qemu/qemu_command.c:3593
msgid "this QEMU binary lacks smartcard host mode support"
msgstr ""

#: src/qemu/qemu_command.c:3603
#, fuzzy, c-format
msgid "invalid certificate name: %s"
msgstr "無效的區域指標，於 %s"

#: src/qemu/qemu_command.c:3614
#, fuzzy, c-format
msgid "invalid database name: %s"
msgstr "無效的區域指標，於 %s"

#: src/qemu/qemu_command.c:3629
msgid "this QEMU binary lacks smartcard passthrough mode support"
msgstr ""

#: src/qemu/qemu_command.c:3736
msgid "guestfwd requires QEMU to support -chardev & -device"
msgstr ""

#: src/qemu/qemu_command.c:3764 src/qemu/qemu_command.c:3803
msgid "virtio channel requires QEMU to support -device"
msgstr ""

#: src/qemu/qemu_command.c:3828
#, c-format
msgid "unsupported console target type %s"
msgstr ""

#: src/qemu/qemu_command.c:3856
msgid "only 1 graphics device is supported"
msgstr ""

#: src/qemu/qemu_command.c:3938
#, fuzzy, c-format
msgid "sdl not supported by '%s'"
msgstr "無預期的資料「%s」"

#: src/qemu/qemu_command.c:3971
#, fuzzy
msgid "spice graphics are not supported with this QEMU"
msgstr "不支援 hypervisor"

#: src/qemu/qemu_command.c:4022
#, c-format
msgid "unsupported graphics type '%s'"
msgstr ""

#: src/qemu/qemu_command.c:4035
msgid "This QEMU does not support QXL graphics adapters"
msgstr ""

#: src/qemu/qemu_command.c:4042
#, c-format
msgid "video type %s is not supported with QEMU"
msgstr ""

#: src/qemu/qemu_command.c:4088
#, c-format
msgid "video type %s is not supported with this QEMU"
msgstr ""

#: src/qemu/qemu_command.c:4100
#, c-format
msgid "video type %s is only valid as primary video card"
msgstr ""

#: src/qemu/qemu_command.c:4115
msgid "only one video card is currently supported"
msgstr ""

#: src/qemu/qemu_command.c:4151 src/qemu/qemu_command.c:4186
msgid "this QEMU binary lacks hda support"
msgstr ""

#: src/qemu/qemu_command.c:4233
#, fuzzy
msgid "invalid watchdog action"
msgstr "沒有有效的連線"

#: src/qemu/qemu_command.c:4248
msgid "booting from assigned devices is only supported for PCI devices"
msgstr ""

#: src/qemu/qemu_command.c:4253
msgid ""
"booting from assigned PCI devices is not supported with this version of qemu"
msgstr ""

#: src/qemu/qemu_command.c:4310 src/qemu/qemu_monitor_text.c:1489
msgid "PCI device assignment is not supported by this version of qemu"
msgstr ""

#: src/qemu/qemu_command.c:4324
#, fuzzy
msgid "TCP migration is not supported with this QEMU binary"
msgstr "不支援 hypervisor"

#: src/qemu/qemu_command.c:4337 src/qemu/qemu_command.c:4374
#, fuzzy
msgid "Failed to clear cloexec flag"
msgstr "無法開啟檔案"

#: src/qemu/qemu_command.c:4349
msgid "STDIO migration is not supported with this QEMU binary"
msgstr ""

#: src/qemu/qemu_command.c:4356
#, fuzzy
msgid "EXEC migration is not supported with this QEMU binary"
msgstr "不支援 hypervisor"

#: src/qemu/qemu_command.c:4364
#, fuzzy
msgid "FD migration is not supported with this QEMU binary"
msgstr "不支援 hypervisor"

#: src/qemu/qemu_command.c:4381
#, fuzzy
msgid "UNIX migration is not supported with this QEMU binary"
msgstr "不支援 hypervisor"

#: src/qemu/qemu_command.c:4388
#, fuzzy
msgid "unknown migration protocol"
msgstr "未知的指令：「%s」"

#: src/qemu/qemu_command.c:4403
#, c-format
msgid ""
"Memory balloon device type '%s' is not supported by this version of qemu"
msgstr ""

#: src/qemu/qemu_command.c:4622
#, fuzzy, c-format
msgid "malformed keyword arguments in '%s'"
msgstr "無效的參數，於 %s"

#: src/qemu/qemu_command.c:4724 src/qemu/qemu_command.c:5813
#, fuzzy, c-format
msgid "cannot parse nbd filename '%s'"
msgstr "無法開啟檔案"

#: src/qemu/qemu_command.c:4780 src/qemu/qemu_command.c:5843
#, fuzzy, c-format
msgid "cannot parse sheepdog filename '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_command.c:4855
#, c-format
msgid "cannot parse drive index '%s'"
msgstr ""

#: src/qemu/qemu_command.c:4863
#, c-format
msgid "cannot parse drive bus '%s'"
msgstr ""

#: src/qemu/qemu_command.c:4871
#, c-format
msgid "cannot parse drive unit '%s'"
msgstr ""

#: src/qemu/qemu_command.c:4880
#, fuzzy, c-format
msgid "cannot parse io mode '%s'"
msgstr "無效的參數，於 %s"

#: src/qemu/qemu_command.c:4889
#, fuzzy, c-format
msgid "missing file parameter in drive '%s'"
msgstr "找不到 %s 的裝置資訊"

#: src/qemu/qemu_command.c:4902
#, c-format
msgid "missing index/unit/bus parameter in drive '%s'"
msgstr ""

#: src/qemu/qemu_command.c:4951
#, fuzzy, c-format
msgid "invalid device name '%s'"
msgstr "無效的區域指標，於 %s"

#: src/qemu/qemu_command.c:4987
#, c-format
msgid "cannot parse NIC vlan in '%s'"
msgstr ""

#: src/qemu/qemu_command.c:4999
#, c-format
msgid "cannot find NIC definition for vlan %d"
msgstr ""

#: src/qemu/qemu_command.c:5056
#, c-format
msgid "cannot parse vlan in '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5086
#, c-format
msgid "cannot parse NIC definition '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5134
#, fuzzy, c-format
msgid "cannot parse sndbuf size in '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_command.c:5170
#, c-format
msgid "unknown PCI device syntax '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5178
#, c-format
msgid "cannot extract PCI device bus '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5185
#, c-format
msgid "cannot extract PCI device slot '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5192
#, c-format
msgid "cannot extract PCI device function '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5227
#, c-format
msgid "unknown USB device syntax '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5236
#, c-format
msgid "cannot extract USB device vendor '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5243
#, c-format
msgid "cannot extract USB device product '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5250
#, c-format
msgid "cannot extract USB device bus '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5257
#, c-format
msgid "cannot extract USB device address '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5369
#, c-format
msgid "cannot find port number in character device %s"
msgstr ""

#: src/qemu/qemu_command.c:5409
#, c-format
msgid "unknown character device syntax %s"
msgstr ""

#: src/qemu/qemu_command.c:5500
#, fuzzy, c-format
msgid "unknown CPU syntax '%s'"
msgstr "未知的主機 %s"

#: src/qemu/qemu_command.c:5579
#, c-format
msgid "cannot parse CPU topology '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5608
#, fuzzy
msgid "no emulator path found"
msgstr "網路名稱或 uuid"

#: src/qemu/qemu_command.c:5666
#, c-format
msgid "missing value for %s argument"
msgstr ""

#: src/qemu/qemu_command.c:5719
#, c-format
msgid "cannot parse VNC port '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5744
#, c-format
msgid "cannot parse memory level '%s'"
msgstr ""

#: src/qemu/qemu_command.c:5756
#, c-format
msgid "cannot parse UUID '%s'"
msgstr ""

#: src/qemu/qemu_command.c:6120
#, fuzzy, c-format
msgid "unknown video adapter type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/qemu/qemu_command.c:6176
msgid "CEPH_ARGS was set without an rbd disk"
msgstr ""

#: src/qemu/qemu_command.c:6183
#, fuzzy, c-format
msgid "could not parse CEPH_ARGS '%s'"
msgstr "無法連上 %s"

#: src/qemu/qemu_command.c:6218
#, c-format
msgid "found no rbd hosts in CEPH_ARGS '%s'"
msgstr ""

#: src/qemu/qemu_conf.c:112
msgid "unable to find hugetlbfs mountpoint"
msgstr ""

#: src/qemu/qemu_conf.c:290
msgid "cgroup_controllers must be a list of strings"
msgstr ""

#: src/qemu/qemu_conf.c:296
#, c-format
msgid "Unknown cgroup controller '%s'"
msgstr ""

#: src/qemu/qemu_conf.c:330
msgid "cgroup_device_acl must be a list of strings"
msgstr ""

#: src/qemu/qemu_conf.c:396
#, fuzzy, c-format
msgid "failed to enable mac filter in '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_conf.c:402
#, fuzzy, c-format
msgid "failed to add rule to drop all frames in '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_domain.c:122
msgid "Unexpected QEMU monitor still active during domain deletion"
msgstr ""

#: src/qemu/qemu_domain.c:182
msgid "no monitor path"
msgstr ""

#: src/qemu/qemu_domain.c:209
#, c-format
msgid "unsupported monitor type '%s'"
msgstr ""

#: src/qemu/qemu_domain.c:287
#, c-format
msgid "Found namespace '%s' doesn't match expected '%s'"
msgstr ""

#: src/qemu/qemu_domain.c:294
#, fuzzy, c-format
msgid "Failed to register xml namespace '%s'"
msgstr "無法從 %s 回復區域"

#: src/qemu/qemu_domain.c:316
msgid "No qemu command-line argument specified"
msgstr ""

#: src/qemu/qemu_domain.c:342
msgid "No qemu environment name specified"
msgstr ""

#: src/qemu/qemu_domain.c:347
msgid "Empty qemu environment name specified"
msgstr ""

#: src/qemu/qemu_domain.c:352
msgid "Invalid environment name, it must begin with a letter or underscore"
msgstr ""

#: src/qemu/qemu_domain.c:357
msgid ""
"Invalid environment name, it must contain only alphanumerics and underscore"
msgstr ""

#: src/qemu/qemu_domain.c:455 src/qemu/qemu_domain.c:499
#: src/qemu/qemu_driver.c:5695 src/qemu/qemu_migration.c:186
#: src/qemu/qemu_migration.c:264 src/qemu/qemu_migration.c:409
#: src/xen/xm_internal.c:341
#, fuzzy
msgid "cannot get time of day"
msgstr "讀取當天的時間"

#: src/qemu/qemu_domain.c:468 src/qemu/qemu_domain.c:513
msgid "cannot acquire state change lock"
msgstr ""

#: src/qemu/qemu_domain.c:471 src/qemu/qemu_domain.c:516
msgid "cannot acquire job mutex"
msgstr ""

#: src/qemu/qemu_domain.c:681 src/qemu/qemu_driver.c:5637
#, fuzzy
msgid "cannot get host CPU capabilities"
msgstr "無法取得能力方面的資訊"

#: src/qemu/qemu_driver.c:146
#, fuzzy, c-format
msgid "Failed to start job on VM '%s': %s"
msgstr "無法暫停區域 %s"

#: src/qemu/qemu_driver.c:148 src/qemu/qemu_driver.c:156
#: src/qemu/qemu_hostdev.c:233 src/qemu/qemu_hostdev.c:250
#: src/qemu/qemu_hostdev.c:268 src/secret/secret_driver.c:500
#: src/uml/uml_driver.c:164 tools/virsh.c:498
#, fuzzy
msgid "unknown error"
msgstr "未知的主機"

#: src/qemu/qemu_driver.c:219
#, fuzzy
msgid "Failed to initialize security drivers"
msgstr "無法開啟網路 %s"

#: src/qemu/qemu_driver.c:295
#, fuzzy, c-format
msgid "Failed to allocate memory for snapshot directory for domain %s"
msgstr "無法建立非運作中的區域 %s\n"

#: src/qemu/qemu_driver.c:305
#, fuzzy, c-format
msgid "Failed to open snapshot directory %s for domain %s: %s"
msgstr "無法刪除區域 %s"

#: src/qemu/qemu_driver.c:320
#, fuzzy
msgid "Failed to allocate memory for path"
msgstr "無法分配節點"

#: src/qemu/qemu_driver.c:327
#, fuzzy, c-format
msgid "Failed to read snapshot file %s: %s"
msgstr "無法讀取描述檔 %s"

#: src/qemu/qemu_driver.c:336
#, fuzzy, c-format
msgid "Failed to parse snapshot XML from file '%s'"
msgstr "無法解析設定檔 %s"

#: src/qemu/qemu_driver.c:488
#, fuzzy, c-format
msgid "Failed to create cache dir '%s': %s"
msgstr "無法建立非運作中的區域 %s\n"

#: src/qemu/qemu_driver.c:506
#, fuzzy, c-format
msgid "Failed to create dump dir '%s': %s"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_driver.c:546
#, c-format
msgid "unable to set ownership of '%s' to user %d:%d"
msgstr ""

#: src/qemu/qemu_driver.c:552 src/qemu/qemu_driver.c:558
#: src/qemu/qemu_driver.c:564
#, c-format
msgid "unable to set ownership of '%s' to %d:%d"
msgstr ""

#: src/qemu/qemu_driver.c:585
#, fuzzy, c-format
msgid "unable to create hugepage path %s"
msgstr "無法建立非運作中的區域 %s\n"

#: src/qemu/qemu_driver.c:592
#, fuzzy, c-format
msgid "unable to set ownership on %s to %d:%d"
msgstr "無法將區域 %s 存至 %s"

#: src/qemu/qemu_driver.c:818
msgid "qemu state driver is not active"
msgstr ""

#: src/qemu/qemu_driver.c:824
#, c-format
msgid "no QEMU URI path given, try %s"
msgstr ""

#: src/qemu/qemu_driver.c:835
#, c-format
msgid "unexpected QEMU URI path '%s', try qemu:///system"
msgstr ""

#: src/qemu/qemu_driver.c:842
#, c-format
msgid "unexpected QEMU URI path '%s', try qemu:///session"
msgstr ""

#: src/qemu/qemu_driver.c:904 src/util/iohelper.c:65
#, fuzzy, c-format
msgid "Unable to open %s"
msgstr "無法暫停區域 %s"

#: src/qemu/qemu_driver.c:1054 src/uml/uml_driver.c:1310
#: src/uml/uml_driver.c:1340 src/vbox/vbox_tmpl.c:1208
#: src/vbox/vbox_tmpl.c:1495 src/vbox/vbox_tmpl.c:1547
#: src/vbox/vbox_tmpl.c:1598 src/vbox/vbox_tmpl.c:1648
#: src/vbox/vbox_tmpl.c:1694 src/vbox/vbox_tmpl.c:1764
#: src/vbox/vbox_tmpl.c:2015
#, c-format
msgid "no domain with matching id %d"
msgstr ""

#: src/qemu/qemu_driver.c:1106 src/qemu/qemu_driver.c:5484
#, c-format
msgid "no domain with matching name '%s'"
msgstr ""

#: src/qemu/qemu_driver.c:1400 src/qemu/qemu_migration.c:1244
#: src/qemu/qemu_process.c:2351
#, fuzzy
msgid "resume operation failed"
msgstr "操作失敗"

#: src/qemu/qemu_driver.c:1636 src/uml/uml_driver.c:1462
#, fuzzy
msgid "cannot set memory of an active domain"
msgstr "非作用中區域的名稱"

#: src/qemu/qemu_driver.c:1688 src/uml/uml_driver.c:1504
msgid "cannot read cputime for domain"
msgstr ""

#: src/qemu/qemu_driver.c:1787
#, fuzzy, c-format
msgid "failed to write header to domain save file '%s'"
msgstr "無法寫入設定檔"

#: src/qemu/qemu_driver.c:1795
#, fuzzy, c-format
msgid "failed to write xml to '%s'"
msgstr "無法取得網路「%s」"

#: src/qemu/qemu_driver.c:1855 src/qemu/qemu_driver.c:2338
#: src/qemu/qemu_driver.c:6050 src/qemu/qemu_hotplug.c:336
#: src/qemu/qemu_hotplug.c:656 src/qemu/qemu_migration.c:119
#: src/qemu/qemu_migration.c:166 src/qemu/qemu_migration.c:807
#: src/qemu/qemu_migration.c:836 src/qemu/qemu_migration.c:945
#: src/qemu/qemu_migration.c:1013 src/qemu/qemu_migration.c:1199
#, fuzzy
msgid "guest unexpectedly quit"
msgstr "無預期的 dict 節點"

#: src/qemu/qemu_driver.c:1869 src/qemu/qemu_migration.c:1022
#, fuzzy
msgid "failed to get domain xml"
msgstr "無法取得區域 UUID"

#: src/qemu/qemu_driver.c:1914
#, fuzzy, c-format
msgid "unable to open %s"
msgstr "無法暫停區域 %s"

#: src/qemu/qemu_driver.c:1931 src/qemu/qemu_driver.c:1956
#, fuzzy, c-format
msgid "Failed to create domain save file '%s'"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_driver.c:1946
#, c-format
msgid "Failed to create domain save file '%s': couldn't determine fs type"
msgstr ""

#: src/qemu/qemu_driver.c:1970
#, c-format
msgid "Error from child process creating '%s'"
msgstr ""

#: src/qemu/qemu_driver.c:1995
#, fuzzy, c-format
msgid "unable to close %s"
msgstr "無法關閉插槽 %d\n"

#: src/qemu/qemu_driver.c:2069
#, fuzzy
msgid "Invalid save image format specified in configuration file"
msgstr "無法解析設定檔"

#: src/qemu/qemu_driver.c:2075
msgid ""
"Compression program for image format in configuration file isn't available"
msgstr ""

#: src/qemu/qemu_driver.c:2242
#, fuzzy, c-format
msgid "failed to create '%s'"
msgstr "無法讀取插槽 %d\n"

#: src/qemu/qemu_driver.c:2252
#, fuzzy, c-format
msgid "unable to save file %s"
msgstr "無法開啟檔案"

#: src/qemu/qemu_driver.c:2278
#, fuzzy
msgid "Invalid dump image format specified in configuration file, using raw"
msgstr "無法解析設定檔"

#: src/qemu/qemu_driver.c:2284
msgid ""
"Compression program for dump image format in configuration file isn't "
"available, using raw"
msgstr ""

#: src/qemu/qemu_driver.c:2365
msgid "resuming after dump failed"
msgstr ""

#: src/qemu/qemu_driver.c:2423
#, fuzzy
msgid "Dump failed"
msgstr "操作失敗"

#: src/qemu/qemu_driver.c:2429
#, fuzzy
msgid "Resuming after dump failed"
msgstr "操作失敗"

#: src/qemu/qemu_driver.c:2491
msgid "cannot change vcpu count of this domain"
msgstr ""

#: src/qemu/qemu_driver.c:2522 src/test/test_driver.c:2121
#: src/xen/xen_driver.c:1079
#, c-format
msgid "argument out of range: %d"
msgstr ""

#: src/qemu/qemu_driver.c:2555 src/qemu/qemu_driver.c:2866
#, c-format
msgid "unknown virt type in domain definition '%d'"
msgstr ""

#: src/qemu/qemu_driver.c:2660
#, c-format
msgid "vcpu number out of range %d > %d"
msgstr ""

#: src/qemu/qemu_driver.c:2679 src/qemu/qemu_process.c:1196
msgid "cpu affinity is not supported"
msgstr ""

#: src/qemu/qemu_driver.c:2685
#, fuzzy
msgid "failed to update or add vcpupin xml"
msgstr "無法取得區域 UUID"

#: src/qemu/qemu_driver.c:2725
#, fuzzy
msgid "cannot list vcpu pinning for an inactive domain"
msgstr "為非作用中的區域取消定義。"

#: src/qemu/qemu_driver.c:2756
msgid "cannot get vCPU placement & pCPU time"
msgstr ""

#: src/qemu/qemu_driver.c:2774
msgid "cpu affinity is not available"
msgstr ""

#: src/qemu/qemu_driver.c:2822 src/test/test_driver.c:2074
#: src/xen/xend_internal.c:2326 src/xen/xm_internal.c:773
#, fuzzy
msgid "domain not active"
msgstr "區域狀態"

#: src/qemu/qemu_driver.c:2889
#, fuzzy
msgid "Failed to get security label"
msgstr "無法取得 hypervisor 類型"

#: src/qemu/qemu_driver.c:2921
#, c-format
msgid "security model string exceeds max %d bytes"
msgstr ""

#: src/qemu/qemu_driver.c:2931
#, c-format
msgid "security DOI string exceeds max %d bytes"
msgstr ""

#: src/qemu/qemu_driver.c:2958 src/qemu/qemu_driver.c:2968
#, fuzzy
msgid "cannot read domain image"
msgstr "節點的區域清單"

#: src/qemu/qemu_driver.c:2975
#, fuzzy
msgid "failed to read qemu header"
msgstr "無法從 Xen 系統程式讀取"

#: src/qemu/qemu_driver.c:2981
msgid "image magic is incorrect"
msgstr ""

#: src/qemu/qemu_driver.c:2987
#, c-format
msgid "image version is not supported (%d > %d)"
msgstr ""

#: src/qemu/qemu_driver.c:2994
#, fuzzy, c-format
msgid "invalid XML length: %d"
msgstr "無效的參數，於 %s"

#: src/qemu/qemu_driver.c:3005
#, fuzzy
msgid "failed to read XML"
msgstr "無法讀取插槽 %d\n"

#: src/qemu/qemu_driver.c:3048
#, c-format
msgid "Invalid compressed save format %d"
msgstr ""

#: src/qemu/qemu_driver.c:3060
#, fuzzy, c-format
msgid "Failed to start decompression binary %s"
msgstr "無法開啟區域 %s"

#: src/qemu/qemu_driver.c:3092
#, fuzzy, c-format
msgid "cannot close file: %s"
msgstr "無法連上 %s"

#: src/qemu/qemu_driver.c:3114
#, fuzzy
msgid "failed to resume domain"
msgstr "無法繼續區域 %s"

#: src/qemu/qemu_driver.c:3204
#, c-format
msgid ""
"cannot restore domain '%s' uuid %s from a file which belongs to domain '%s' "
"uuid %s"
msgstr ""

#: src/qemu/qemu_driver.c:3481
#, fuzzy
msgid "domain is already running"
msgstr "區域已經啟動"

#: src/qemu/qemu_driver.c:3640
#, fuzzy, c-format
msgid "Defining domain '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_driver.c:3653
#, fuzzy, c-format
msgid "Creating domain '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_driver.c:3703
#, fuzzy, c-format
msgid "Undefining domain '%s'"
msgstr "無法為區域 %s 取消定義"

#: src/qemu/qemu_driver.c:3744 src/qemu/qemu_driver.c:3927
#: src/uml/uml_driver.c:1753
#, fuzzy
msgid "cannot attach device on inactive domain"
msgstr "取消定義非作用中的區域"

#: src/qemu/qemu_driver.c:3807 src/uml/uml_driver.c:1770
#, c-format
msgid "disk bus '%s' cannot be hotplugged."
msgstr ""

#: src/qemu/qemu_driver.c:3815
#, c-format
msgid "disk device type '%s' cannot be hotplugged"
msgstr ""

#: src/qemu/qemu_driver.c:3832
#, c-format
msgid "disk controller bus '%s' cannot be hotplugged."
msgstr ""

#: src/qemu/qemu_driver.c:3848 src/uml/uml_driver.c:1775
#, c-format
msgid "device type '%s' cannot be attached"
msgstr ""

#: src/qemu/qemu_driver.c:3881 src/qemu/qemu_driver.c:3908
#: src/qemu/qemu_driver.c:4102 src/uml/uml_driver.c:1795
#: src/uml/uml_driver.c:1903 src/vbox/vbox_tmpl.c:5227
#: src/vbox/vbox_tmpl.c:5242 src/vbox/vbox_tmpl.c:5377
#, fuzzy
msgid "cannot modify the persistent configuration of a domain"
msgstr "為非作用中的區域取消定義。"

#: src/qemu/qemu_driver.c:3968
#, c-format
msgid "disk bus '%s' cannot be updated."
msgstr ""

#: src/qemu/qemu_driver.c:3986
#, c-format
msgid "device type '%s' cannot be updated"
msgstr ""

#: src/qemu/qemu_driver.c:4034 src/uml/uml_driver.c:1867
#, fuzzy
msgid "cannot detach device on inactive domain"
msgstr "取消定義非作用中的區域"

#: src/qemu/qemu_driver.c:4060 src/uml/uml_driver.c:1882
msgid "This type of disk cannot be hot unplugged"
msgstr ""

#: src/qemu/qemu_driver.c:4070
#, c-format
msgid "disk controller bus '%s' cannot be hotunplugged."
msgstr ""

#: src/qemu/qemu_driver.c:4078 src/uml/uml_driver.c:1886
msgid "This type of device cannot be hot unplugged"
msgstr ""

#: src/qemu/qemu_driver.c:4156 src/uml/uml_driver.c:1954
#, fuzzy
msgid "cannot set autostart for transient domain"
msgstr "自動啟動一個區域"

#: src/qemu/qemu_driver.c:4173 src/storage/storage_driver.c:1026
#: src/uml/uml_driver.c:1971
#, c-format
msgid "cannot create autostart directory %s"
msgstr ""

#: src/qemu/qemu_driver.c:4216 src/qemu/qemu_driver.c:4622
#: src/qemu/qemu_driver.c:4689
#, fuzzy
msgid "cgroup CPU controller is not mounted"
msgstr "網路名稱或 uuid"

#: src/qemu/qemu_driver.c:4246 src/qemu/qemu_driver.c:4322
msgid "blkio cgroup isn't mounted"
msgstr ""

#: src/qemu/qemu_driver.c:4254 src/qemu/qemu_driver.c:4330
#: src/qemu/qemu_driver.c:4414 src/qemu/qemu_driver.c:4517
#: src/qemu/qemu_driver.c:4630 src/qemu/qemu_driver.c:4703
#, fuzzy, c-format
msgid "No such domain %s"
msgstr "無法繼續區域 %s"

#: src/qemu/qemu_driver.c:4272
msgid "invalid type for blkio weight tunable, expected a 'unsigned int'"
msgstr ""

#: src/qemu/qemu_driver.c:4279
msgid "out of blkio weight range."
msgstr ""

#: src/qemu/qemu_driver.c:4287
#, fuzzy
msgid "unable to set blkio weight tunable"
msgstr "無法取得 hypervisor 類型"

#: src/qemu/qemu_driver.c:4364
#, fuzzy
msgid "unable to get blkio weight"
msgstr "無法取得能力方面的資訊"

#: src/qemu/qemu_driver.c:4369
#, fuzzy
msgid "Field blkio weight too long for destination"
msgstr "無法解析 Xend 的區域資訊"

#: src/qemu/qemu_driver.c:4406 src/qemu/qemu_driver.c:4509
msgid "cgroup memory controller is not mounted"
msgstr ""

#: src/qemu/qemu_driver.c:4647
msgid "invalid type for cpu_shares tunable, expected a 'ullong'"
msgstr ""

#: src/qemu/qemu_driver.c:4654
msgid "unable to set cpu shares tunable"
msgstr ""

#: src/qemu/qemu_driver.c:4716
#, fuzzy
msgid "unable to get cpu shares tunable"
msgstr "無法取得 hypervisor 類型"

#: src/qemu/qemu_driver.c:4723
#, fuzzy
msgid "Field cpu_shares too long for destination"
msgstr "無法解析 Xend 的區域資訊"

#: src/qemu/qemu_driver.c:4781 src/test/test_driver.c:2721
#, fuzzy, c-format
msgid "invalid path: %s"
msgstr "無效的參數，於 %s"

#: src/qemu/qemu_driver.c:4787 src/qemu/qemu_hotplug.c:74
#, fuzzy, c-format
msgid "missing disk device alias name for %s"
msgstr "找不到 %s 的裝置資訊"

#: src/qemu/qemu_driver.c:4854 src/test/test_driver.c:2776
#, c-format
msgid "invalid path, '%s' is not a known interface"
msgstr ""

#: src/qemu/qemu_driver.c:4941 src/qemu/qemu_driver.c:5107
#: src/uml/uml_driver.c:2028
msgid "NULL or empty path"
msgstr ""

#: src/qemu/qemu_driver.c:4960
#, fuzzy, c-format
msgid "%s: failed to open"
msgstr "無法開啟檔案"

#: src/qemu/qemu_driver.c:4971
#, fuzzy, c-format
msgid "%s: failed to seek or read"
msgstr "無法開啟要讀取的 %s"

#: src/qemu/qemu_driver.c:4978 src/uml/uml_driver.c:2065
#, fuzzy
msgid "invalid path"
msgstr "無效的參數，於 "

#: src/qemu/qemu_driver.c:5034
#, c-format
msgid "mkstemp(\"%s\") failed"
msgstr ""

#: src/qemu/qemu_driver.c:5056
#, fuzzy, c-format
msgid "failed to read temporary file created with template %s"
msgstr "無法讀取設定檔 %s"

#: src/qemu/qemu_driver.c:5122
#, c-format
msgid "invalid path %s not assigned to domain"
msgstr ""

#: src/qemu/qemu_driver.c:5130
#, fuzzy, c-format
msgid "failed to open path '%s'"
msgstr "無法暫停區域 %s"

#: src/qemu/qemu_driver.c:5138
#, fuzzy, c-format
msgid "unknown disk format %s for %s"
msgstr "找不到 %s 的裝置資訊"

#: src/qemu/qemu_driver.c:5162 src/storage/storage_backend.c:1059
#: src/storage/storage_backend.c:1156
#, c-format
msgid "cannot stat file '%s'"
msgstr ""

#: src/qemu/qemu_driver.c:5184
#, fuzzy, c-format
msgid "failed to seek to end of %s"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_driver.c:5332 src/qemu/qemu_driver.c:5396
#, fuzzy
msgid "no domain XML passed"
msgstr "節點的區域清單"

#: src/qemu/qemu_driver.c:5337
msgid "PrepareTunnel called but no TUNNELLED flag set"
msgstr ""

#: src/qemu/qemu_driver.c:5342
msgid "tunnelled migration requested but NULL stream passed"
msgstr ""

#: src/qemu/qemu_driver.c:5390
msgid "Tunnelled migration requested but invalid RPC method called"
msgstr ""

#: src/qemu/qemu_driver.c:5535 src/xen/xen_driver.c:1895
#, c-format
msgid "device %s is not a PCI device"
msgstr ""

#: src/qemu/qemu_driver.c:5743
#, fuzzy
msgid "no job is active on the domain"
msgstr "列出作用中與非作用中的區域"

#: src/qemu/qemu_driver.c:5794 src/qemu/qemu_driver.c:5843
#, fuzzy
msgid "domain is not being migrated"
msgstr "區域 %s 正在重新開機中\n"

#: src/qemu/qemu_driver.c:5868 src/storage/storage_backend.c:766
msgid "unable to find kvm-img or qemu-img"
msgstr ""

#: src/qemu/qemu_driver.c:5898
#, c-format
msgid "cannot create snapshot directory '%s'"
msgstr ""

#: src/qemu/qemu_driver.c:5910
#, fuzzy, c-format
msgid "failed to create snapshot file '%s'"
msgstr "無法讀取設定檔 %s"

#: src/qemu/qemu_driver.c:5914
#, fuzzy, c-format
msgid "Failed to write snapshot data to %s"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_driver.c:5969
#, fuzzy, c-format
msgid "Disk '%s' does not support snapshotting"
msgstr "「%s」指令並不支援 --%s 選項"

#: src/qemu/qemu_driver.c:6004
#, fuzzy, c-format
msgid "Disk device '%s' does not support snapshotting"
msgstr "「%s」指令並不支援 --%s 選項"

#: src/qemu/qemu_driver.c:6064
#, fuzzy
msgid "resuming after snapshot failed"
msgstr "操作失敗"

#: src/qemu/qemu_driver.c:6235
#, c-format
msgid "no snapshot with matching name '%s'"
msgstr ""

#: src/qemu/qemu_driver.c:6297
msgid "the domain does not have a current snapshot"
msgstr ""

#: src/qemu/qemu_driver.c:6333 src/qemu/qemu_driver.c:6373
#: src/qemu/qemu_driver.c:6644
#, c-format
msgid "no domain snapshot with matching name '%s'"
msgstr ""

#: src/qemu/qemu_driver.c:6522
#, c-format
msgid "no domain snapshot parent with matching name '%s'"
msgstr ""

#: src/qemu/qemu_driver.c:6791 src/uml/uml_driver.c:2119
#, fuzzy, c-format
msgid "cannot find character device %s"
msgstr "未知的作業系統類型 %s"

#: src/qemu/qemu_hostdev.c:232
#, fuzzy, c-format
msgid "Failed to re-attach PCI device: %s"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_hostdev.c:249
#, fuzzy, c-format
msgid "Failed to allocate pciDeviceList: %s"
msgstr "無法分配節點"

#: src/qemu/qemu_hostdev.c:267
#, fuzzy, c-format
msgid "Failed to reset PCI device: %s"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_hotplug.c:66
#, c-format
msgid "No device with bus '%s' and target '%s'"
msgstr ""

#: src/qemu/qemu_hotplug.c:81
#, c-format
msgid "Removable media not supported for %s device"
msgstr ""

#: src/qemu/qemu_hotplug.c:154 src/qemu/qemu_hotplug.c:361
#: src/qemu/qemu_hotplug.c:475 src/uml/uml_driver.c:1693
#, c-format
msgid "target %s already exists"
msgstr ""

#: src/qemu/qemu_hotplug.c:250
#, c-format
msgid "target %s:%d already exists"
msgstr ""

#: src/qemu/qemu_hotplug.c:374
#, fuzzy, c-format
msgid "unexpected disk address type %s"
msgstr "無預期的 mime 類型"

#: src/qemu/qemu_hotplug.c:402
#, c-format
msgid "SCSI controller %d was missing its PCI address"
msgstr ""

#: src/qemu/qemu_hotplug.c:486 src/uml/uml_driver.c:1700
msgid "disk source path is missing"
msgstr ""

#: src/qemu/qemu_hotplug.c:565
msgid "installed qemu version does not support host_net_add"
msgstr ""

#: src/qemu/qemu_hotplug.c:606
#, fuzzy
msgid "Unable to attach network devices without vlan"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_hotplug.c:787
msgid "guest unexpectedly quit during hotplug"
msgstr ""

#: src/qemu/qemu_hotplug.c:913 src/qemu/qemu_hotplug.c:1717
#, c-format
msgid "hostdev mode '%s' not supported"
msgstr ""

#: src/qemu/qemu_hotplug.c:954 src/qemu/qemu_hotplug.c:1731
#, c-format
msgid "hostdev subsys type '%s' not supported"
msgstr ""

#: src/qemu/qemu_hotplug.c:994
msgid "cannot find existing graphics device to modify"
msgstr ""

#: src/qemu/qemu_hotplug.c:1003
msgid "cannot change port settings on vnc graphics"
msgstr ""

#: src/qemu/qemu_hotplug.c:1008
msgid "cannot change listen address setting on vnc graphics"
msgstr ""

#: src/qemu/qemu_hotplug.c:1013
msgid "cannot change keymap setting on vnc graphics"
msgstr ""

#: src/qemu/qemu_hotplug.c:1042
msgid "cannot change port settings on spice graphics"
msgstr ""

#: src/qemu/qemu_hotplug.c:1047
msgid "cannot change listen address setting on spice graphics"
msgstr ""

#: src/qemu/qemu_hotplug.c:1052
msgid "cannot change keymap setting on spice graphics"
msgstr ""

#: src/qemu/qemu_hotplug.c:1078
#, c-format
msgid "unable to change config on '%s' graphics type"
msgstr ""

#: src/qemu/qemu_hotplug.c:1116 src/qemu/qemu_hotplug.c:1207
#: src/uml/uml_driver.c:1820
#, fuzzy, c-format
msgid "disk %s not found"
msgstr "區域資訊"

#: src/qemu/qemu_hotplug.c:1134 src/qemu/qemu_hotplug.c:1350
#: src/qemu/qemu_hotplug.c:1438 src/qemu/qemu_hotplug.c:1575
msgid "device cannot be detached without a PCI address"
msgstr ""

#: src/qemu/qemu_hotplug.c:1213
#, c-format
msgid "Underlying qemu does not support %s disk removal"
msgstr ""

#: src/qemu/qemu_hotplug.c:1341
#, c-format
msgid "disk controller %s:%d not found"
msgstr ""

#: src/qemu/qemu_hotplug.c:1356
msgid "device cannot be detached: device is busy"
msgstr ""

#: src/qemu/qemu_hotplug.c:1428
#, c-format
msgid "network device %02x:%02x:%02x:%02x:%02x:%02x not found"
msgstr ""

#: src/qemu/qemu_hotplug.c:1444
msgid "unable to determine original VLAN"
msgstr ""

#: src/qemu/qemu_hotplug.c:1506
#, fuzzy, c-format
msgid "failed to remove ebtables rule on  '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_hotplug.c:1564
#, c-format
msgid "host pci device %.4x:%.2x:%.2x.%.1x not found"
msgstr ""

#: src/qemu/qemu_hotplug.c:1664
#, c-format
msgid "host usb device %03d.%03d not found"
msgstr ""

#: src/qemu/qemu_hotplug.c:1672
msgid "device cannot be detached without a device alias"
msgstr ""

#: src/qemu/qemu_hotplug.c:1678
msgid "device cannot be detached with this QEMU version"
msgstr ""

#: src/qemu/qemu_hotplug.c:1767
msgid "Graphics password only supported for VNC"
msgstr ""

#: src/qemu/qemu_hotplug.c:1793
#, fuzzy
msgid "Expiry of passwords is not supported"
msgstr "網路 %s 已開啟\n"

#: src/qemu/qemu_migration.c:52
msgid "Domain with assigned host devices cannot be migrated"
msgstr ""

#: src/qemu/qemu_migration.c:104
#, fuzzy
msgid "migration job"
msgstr "節點資訊"

#: src/qemu/qemu_migration.c:107
#, fuzzy
msgid "domain save job"
msgstr "區域狀態"

#: src/qemu/qemu_migration.c:110
#, fuzzy
msgid "domain core dump job"
msgstr "區域 %s 已傾印至 %s\n"

#: src/qemu/qemu_migration.c:113
msgid "job"
msgstr ""

#: src/qemu/qemu_migration.c:195
#, fuzzy
msgid "is not active"
msgstr "區域狀態"

#: src/qemu/qemu_migration.c:216
#, fuzzy
msgid "unexpectedly failed"
msgstr "無預期的數值節點"

#: src/qemu/qemu_migration.c:222
msgid "canceled by client"
msgstr ""

#: src/qemu/qemu_migration.c:306
#, fuzzy
msgid "cannot create pipe for tunnelled migration"
msgstr "傾印一個區域的核心。"

#: src/qemu/qemu_migration.c:314
#, c-format
msgid "Cannot determine QEMU argv syntax %s"
msgstr ""

#: src/qemu/qemu_migration.c:344
#, fuzzy
msgid "cannot pass pipe for tunnelled migration"
msgstr "節點資訊"

#: src/qemu/qemu_migration.c:433
msgid ""
"hostname on destination resolved to localhost, but migration requires an FQDN"
msgstr ""

#: src/qemu/qemu_migration.c:455
msgid "only tcp URIs are supported for KVM/QEMU migrations"
msgstr ""

#: src/qemu/qemu_migration.c:478
msgid "URI ended with incorrect ':port'"
msgstr ""

#: src/qemu/qemu_migration.c:606
#, c-format
msgid "cannot parse URI %s"
msgstr ""

#: src/qemu/qemu_migration.c:660
msgid "tunnelled migration failed to read from qemu"
msgstr ""

#: src/qemu/qemu_migration.c:671
#, fuzzy
msgid "Failed to write migration data to remote libvirtd"
msgstr "無法寫入插槽 %d\n"

#: src/qemu/qemu_migration.c:732
msgid "cannot open tunnelled migration socket"
msgstr ""

#: src/qemu/qemu_migration.c:740
#, c-format
msgid "Unix socket '%s' too big for destination"
msgstr ""

#: src/qemu/qemu_migration.c:747
#, c-format
msgid "Cannot bind to unix socket '%s' for tunnelled migration"
msgstr ""

#: src/qemu/qemu_migration.c:753
#, c-format
msgid "Cannot listen on unix socket '%s' for tunnelled migration"
msgstr ""

#: src/qemu/qemu_migration.c:760
#, c-format
msgid "Cannot change unix socket '%s' owner"
msgstr ""

#: src/qemu/qemu_migration.c:769
#, c-format
msgid "Cannot extract Qemu version from '%s'"
msgstr ""

#: src/qemu/qemu_migration.c:777
msgid "Source qemu is too old to support tunnelled migration"
msgstr ""

#: src/qemu/qemu_migration.c:830
msgid "tunnelled migration monitor command failed"
msgstr ""

#: src/qemu/qemu_migration.c:859
#, fuzzy
msgid "migrate failed"
msgstr "操作失敗"

#: src/qemu/qemu_migration.c:868
msgid "tunnelled migration failed to accept from qemu"
msgstr ""

#: src/qemu/qemu_migration.c:996
#, fuzzy, c-format
msgid "Failed to connect to remote libvirt URI %s"
msgstr "無法連上 hypervisor"

#: src/qemu/qemu_migration.c:1006
msgid "Destination libvirt does not support peer-to-peer migration protocol"
msgstr ""

#: src/qemu/qemu_migration.c:1107
#, fuzzy, c-format
msgid "Failed to resume guest %s after failure"
msgstr "無法繼續區域 %s"

#: src/qemu/qemu_migration.c:1184
#, c-format
msgid "domain '%s' is not processing incoming migration"
msgstr ""

#: src/qemu/qemu_migration.c:1374
#, fuzzy
msgid "Unable to set cloexec flag"
msgstr "無法刪除網路 %s"

#: src/qemu/qemu_monitor.c:257
#, fuzzy
msgid "failed to create socket"
msgstr "無法讀取插槽 %d\n"

#: src/qemu/qemu_monitor.c:265
#, c-format
msgid "Monitor path %s too big for destination"
msgstr ""

#: src/qemu/qemu_monitor.c:282
#, fuzzy
msgid "failed to connect to monitor socket"
msgstr "無法連上 Xen Store"

#: src/qemu/qemu_monitor.c:289
msgid "monitor socket did not show up."
msgstr ""

#: src/qemu/qemu_monitor.c:307
#, c-format
msgid "Unable to open monitor path %s"
msgstr ""

#: src/qemu/qemu_monitor.c:330
#, c-format
msgid "Process %d %p %p [[[[%s]]][[[%s]]]"
msgstr ""

#: src/qemu/qemu_monitor.c:530
#, c-format
msgid "event from unexpected fd %d!=%d / watch %d!=%d"
msgstr ""

#: src/qemu/qemu_monitor.c:577
#, c-format
msgid "unhandled fd event %d for monitor fd %d"
msgstr ""

#: src/qemu/qemu_monitor.c:622
msgid "EOF notify callback must be supplied"
msgstr ""

#: src/qemu/qemu_monitor.c:633
msgid "cannot initialize monitor mutex"
msgstr ""

#: src/qemu/qemu_monitor.c:639
msgid "cannot initialize monitor condition"
msgstr ""

#: src/qemu/qemu_monitor.c:663
#, fuzzy, c-format
msgid "unable to handle monitor type: %s"
msgstr "無法為網路 %s 取消定義"

#: src/qemu/qemu_monitor.c:672
msgid "Unable to set monitor close-on-exec flag"
msgstr ""

#: src/qemu/qemu_monitor.c:677
msgid "Unable to put monitor into non-blocking mode"
msgstr ""

#: src/qemu/qemu_monitor.c:689
msgid "unable to register monitor events"
msgstr ""

#: src/qemu/qemu_monitor.c:905 src/qemu/qemu_monitor.c:952
#: src/qemu/qemu_monitor.c:972 src/qemu/qemu_monitor.c:991
#: src/qemu/qemu_monitor.c:1011 src/qemu/qemu_monitor.c:1030
#: src/qemu/qemu_monitor.c:1051 src/qemu/qemu_monitor.c:1076
#: src/qemu/qemu_monitor.c:1119 src/qemu/qemu_monitor.c:1165
#: src/qemu/qemu_monitor.c:1197 src/qemu/qemu_monitor.c:1219
#: src/qemu/qemu_monitor.c:1238 src/qemu/qemu_monitor.c:1259
#: src/qemu/qemu_monitor.c:1282 src/qemu/qemu_monitor.c:1305
#: src/qemu/qemu_monitor.c:1327 src/qemu/qemu_monitor.c:1347
#: src/qemu/qemu_monitor.c:1367 src/qemu/qemu_monitor.c:1390
#: src/qemu/qemu_monitor.c:1418 src/qemu/qemu_monitor.c:1451
#: src/qemu/qemu_monitor.c:1483 src/qemu/qemu_monitor.c:1524
#: src/qemu/qemu_monitor.c:1587 src/qemu/qemu_monitor.c:1612
#: src/qemu/qemu_monitor.c:1631 src/qemu/qemu_monitor.c:1652
#: src/qemu/qemu_monitor.c:1673 src/qemu/qemu_monitor.c:1696
#: src/qemu/qemu_monitor.c:1719 src/qemu/qemu_monitor.c:1740
#: src/qemu/qemu_monitor.c:1762 src/qemu/qemu_monitor.c:1784
#: src/qemu/qemu_monitor.c:1818 src/qemu/qemu_monitor.c:1843
#: src/qemu/qemu_monitor.c:1882 src/qemu/qemu_monitor.c:1907
#: src/qemu/qemu_monitor.c:1944 src/qemu/qemu_monitor.c:1965
#: src/qemu/qemu_monitor.c:1986 src/qemu/qemu_monitor.c:2012
#: src/qemu/qemu_monitor.c:2032 src/qemu/qemu_monitor.c:2051
#: src/qemu/qemu_monitor.c:2070 src/qemu/qemu_monitor.c:2093
#: src/qemu/qemu_monitor.c:2127 src/qemu/qemu_monitor.c:2148
#: src/qemu/qemu_monitor.c:2167 src/qemu/qemu_monitor.c:2186
#: src/qemu/qemu_monitor.c:2205
msgid "monitor must not be NULL"
msgstr ""

#: src/qemu/qemu_monitor.c:1142
#, fuzzy, c-format
msgid "unsupported protocol type %s"
msgstr "無預期的資料「%s」"

#: src/qemu/qemu_monitor.c:1530
#, c-format
msgid "file offset must be a multiple of %llu"
msgstr ""

#: src/qemu/qemu_monitor.c:1790
msgid "fd must be valid"
msgstr ""

#: src/qemu/qemu_monitor.c:1796
#, c-format
msgid "qemu is not using a unix socket monitor, cannot send fd %s"
msgstr ""

#: src/qemu/qemu_monitor_json.c:232
#, c-format
msgid "cannot parse JSON doc '%s'"
msgstr ""

#: src/qemu/qemu_monitor_json.c:239 src/qemu/qemu_monitor_text.c:257
#, fuzzy, c-format
msgid "cannot send monitor command '%s'"
msgstr "未知的指令：「%s」"

#: src/qemu/qemu_monitor_json.c:307 src/qemu/qemu_monitor_json.c:325
#, fuzzy, c-format
msgid "unable to execute QEMU command '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_monitor_json.c:311
#, c-format
msgid "unable to execute QEMU command '%s': %s"
msgstr ""

#: src/qemu/qemu_monitor_json.c:383
#, c-format
msgid "argument key '%s' is too short, missing type prefix"
msgstr ""

#: src/qemu/qemu_monitor_json.c:432
#, c-format
msgid "unsupported data type '%c' for arg '%s'"
msgstr ""

#: src/qemu/qemu_monitor_json.c:490
#, fuzzy, c-format
msgid "unexpected empty keyword in %s"
msgstr "無預期的 token（指令名稱）：「%s」"

#: src/qemu/qemu_monitor_json.c:702
msgid "human monitor command was missing return data"
msgstr ""

#: src/qemu/qemu_monitor_json.c:890
msgid "cpu reply was missing return data"
msgstr ""

#: src/qemu/qemu_monitor_json.c:896
msgid "cpu information was not an array"
msgstr ""

#: src/qemu/qemu_monitor_json.c:902
#, fuzzy
msgid "cpu information was empty"
msgstr "區域 vcpu 的資訊"

#: src/qemu/qemu_monitor_json.c:917 src/qemu/qemu_monitor_json.c:2075
msgid "character device information was missing aray element"
msgstr ""

#: src/qemu/qemu_monitor_json.c:923
#, fuzzy
msgid "cpu information was missing cpu number"
msgstr "區域的資訊不全，沒有名稱"

#: src/qemu/qemu_monitor_json.c:936
#, c-format
msgid "unexpected cpu index %d expecting %d"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1016 src/qemu/qemu_monitor_json.c:1071
msgid "info balloon reply was missing return data"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1023
msgid "info balloon reply was missing balloon data"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1079
msgid "info balloon reply was missing balloon mem_swapped_in"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1090
msgid "info balloon reply was missing balloon mem_swapped_out"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1101
msgid "info balloon reply was missing balloon major_page_faults"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1112
msgid "info balloon reply was missing balloon minor_page_faults"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1123
msgid "info balloon reply was missing balloon free_mem"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1134
msgid "info balloon reply was missing balloon total_mem"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1187 src/qemu/qemu_monitor_json.c:1293
msgid "blockstats reply was missing device list"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1197 src/qemu/qemu_monitor_json.c:1203
#: src/qemu/qemu_monitor_json.c:1304 src/qemu/qemu_monitor_json.c:1310
msgid "blockstats device entry was not in expected format"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1221 src/qemu/qemu_monitor_json.c:1335
msgid "blockstats stats entry was not in expected format"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1227 src/qemu/qemu_monitor_json.c:1233
#: src/qemu/qemu_monitor_json.c:1239 src/qemu/qemu_monitor_json.c:1245
#: src/qemu/qemu_monitor_json.c:1341
#, c-format
msgid "cannot read %s statistic"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1253 src/qemu/qemu_monitor_json.c:1349
#, c-format
msgid "cannot find statistics for device '%s'"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1328
msgid "blockstats parent entry was not in expected format"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1696
msgid "info migration reply was missing return data"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1702
msgid "info migration reply was missing return status"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1708 src/qemu/qemu_monitor_text.c:1145
#: src/qemu/qemu_monitor_text.c:1152
#, fuzzy, c-format
msgid "unexpected migration status in %s"
msgstr "無預期的資料「%s」"

#: src/qemu/qemu_monitor_json.c:1716
msgid "migration was active, but no RAM info was set"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1722
msgid "migration was active, but RAM 'transferred' data was missing"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1727
msgid "migration was active, but RAM 'remaining' data was missing"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1732
msgid "migration was active, but RAM 'total' data was missing"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1827 src/qemu/qemu_monitor_json.c:1837
#: src/qemu/qemu_monitor_json.c:1847
msgid "usb_add not suppported in JSON mode"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1857 src/qemu/qemu_monitor_json.c:1868
#: src/qemu/qemu_monitor_json.c:1878 src/qemu/qemu_monitor_json.c:2144
msgid "pci_add not suppported in JSON mode"
msgstr ""

#: src/qemu/qemu_monitor_json.c:1887
msgid "pci_del not suppported in JSON mode"
msgstr ""

#: src/qemu/qemu_monitor_json.c:2059
msgid "character device reply was missing return data"
msgstr ""

#: src/qemu/qemu_monitor_json.c:2065
msgid "character device information was not an array"
msgstr ""

#: src/qemu/qemu_monitor_json.c:2081 src/qemu/qemu_monitor_json.c:2087
#, fuzzy
msgid "character device information was missing filename"
msgstr "區域的資訊不全，沒有名稱"

#: src/qemu/qemu_monitor_json.c:2100 src/qemu/qemu_monitor_text.c:1926
#, fuzzy, c-format
msgid "failed to save chardev path '%s'"
msgstr "無法存入內容"

#: src/qemu/qemu_monitor_json.c:2158
msgid "drive_add reply was missing device address"
msgstr ""

#: src/qemu/qemu_monitor_json.c:2164
msgid "drive_add reply was missing device bus number"
msgstr ""

#: src/qemu/qemu_monitor_json.c:2170
msgid "drive_add reply was missing device unit number"
msgstr ""

#: src/qemu/qemu_monitor_json.c:2221
msgid "query-pci not suppported in JSON mode"
msgstr ""

#: src/qemu/qemu_monitor_json.c:2340
msgid ""
"deleting disk is not supported.  This may leak data if disk is reassigned"
msgstr ""

#: src/qemu/qemu_monitor_json.c:2492
msgid ""
"HMP passthrough is not supported by qemu process; only QMP commands can be "
"used"
msgstr ""

#: src/qemu/qemu_monitor_text.c:368
msgid "cannot stop CPU execution"
msgstr ""

#: src/qemu/qemu_monitor_text.c:381
#, fuzzy
msgid "system shutdown operation failed"
msgstr "操作失敗"

#: src/qemu/qemu_monitor_text.c:400
msgid "cannot run monitor command to fetch CPU thread info"
msgstr ""

#: src/qemu/qemu_monitor_text.c:552
#, fuzzy
msgid "could not query memory balloon allocation"
msgstr "改變記憶體分配"

#: src/qemu/qemu_monitor_text.c:562
#, c-format
msgid "could not parse memory balloon allocation from '%s'"
msgstr ""

#: src/qemu/qemu_monitor_text.c:589
msgid "could not query memory balloon statistics"
msgstr ""

#: src/qemu/qemu_monitor_text.c:621
msgid "'info blockstats' command failed"
msgstr ""

#: src/qemu/qemu_monitor_text.c:633
msgid "'info blockstats' not supported by this qemu"
msgstr ""

#: src/qemu/qemu_monitor_text.c:704
#, fuzzy, c-format
msgid "no stats found for device %s"
msgstr "找不到 %s 裝置的目標資訊"

#: src/qemu/qemu_monitor_text.c:717
msgid "unable to query block extent with this QEMU"
msgstr ""

#: src/qemu/qemu_monitor_text.c:761
msgid "setting VNC password failed"
msgstr ""

#: src/qemu/qemu_monitor_text.c:786
#, fuzzy
msgid "setting password failed"
msgstr "操作失敗"

#: src/qemu/qemu_monitor_text.c:820
#, fuzzy
msgid "expiring password failed"
msgstr "操作失敗"

#: src/qemu/qemu_monitor_text.c:859
#, fuzzy
msgid "could not balloon memory allocation"
msgstr "改變記憶體分配"

#: src/qemu/qemu_monitor_text.c:896
#, fuzzy
msgid "could not change CPU online status"
msgstr "無法連上 %s"

#: src/qemu/qemu_monitor_text.c:931
#, fuzzy, c-format
msgid "could not eject media on %s"
msgstr "無法連上 %s"

#: src/qemu/qemu_monitor_text.c:940
#, fuzzy, c-format
msgid "could not eject media on %s: %s"
msgstr "無法連上 %s"

#: src/qemu/qemu_monitor_text.c:975
#, fuzzy, c-format
msgid "could not change media on %s"
msgstr "無法連上 %s"

#: src/qemu/qemu_monitor_text.c:984 src/qemu/qemu_monitor_text.c:991
#, fuzzy, c-format
msgid "could not change media on %s: %s"
msgstr "無法連上 %s"

#: src/qemu/qemu_monitor_text.c:1027
#, fuzzy, c-format
msgid "could not save memory region to '%s'"
msgstr "無法連上 Xen Store %s"

#: src/qemu/qemu_monitor_text.c:1074
#, fuzzy
msgid "could not restrict migration speed"
msgstr "無法連上 %s"

#: src/qemu/qemu_monitor_text.c:1101
msgid "could not set maximum migration downtime"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1136
msgid "cannot query migration status"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1165
#, c-format
msgid "cannot parse migration data transferred statistic %s"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1177
#, c-format
msgid "cannot parse migration data remaining statistic %s"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1188
#, c-format
msgid "cannot parse migration data total statistic %s"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1242
#, fuzzy, c-format
msgid "unable to start migration to %s"
msgstr "無法開啟區域 %s"

#: src/qemu/qemu_monitor_text.c:1249
#, fuzzy, c-format
msgid "migration to '%s' failed: %s"
msgstr "操作失敗：%s"

#: src/qemu/qemu_monitor_text.c:1256
#, fuzzy, c-format
msgid "migration to '%s' not supported by this qemu: %s"
msgstr "不支援 hypervisor %s"

#: src/qemu/qemu_monitor_text.c:1277
msgid "cannot run monitor command to cancel migration"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1306
msgid "cannot run monitor command to add usb disk"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1314
#, c-format
msgid "unable to add USB disk %s: %s"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1342
msgid "cannot attach usb device"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1350
#, fuzzy
msgid "adding usb device failed"
msgstr "載入主機定義檔"

#: src/qemu/qemu_monitor_text.c:1483
msgid "cannot attach host pci device"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1495 src/qemu/qemu_monitor_text.c:1582
#, c-format
msgid "parsing pci_add reply failed: %s"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1534
#, c-format
msgid "cannot attach %s disk %s"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1547
#, fuzzy, c-format
msgid "adding %s disk failed %s: %s"
msgstr "區域 %s 已存至 %s\n"

#: src/qemu/qemu_monitor_text.c:1576
#, fuzzy, c-format
msgid "failed to add NIC with '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_monitor_text.c:1620
#, fuzzy
msgid "failed to remove PCI device"
msgstr "無法開啟檔案"

#: src/qemu/qemu_monitor_text.c:1639
#, c-format
msgid "failed to detach PCI device, invalid address %.4x:%.2x:%.2x: %s"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1668
#, fuzzy, c-format
msgid "failed to pass fd to qemu with '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_monitor_text.c:1676
#, c-format
msgid "qemu does not support sending of file handles: %s"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1683
#, fuzzy, c-format
msgid "unable to send file handle '%s': %s"
msgstr "無法暫停區域 %s"

#: src/qemu/qemu_monitor_text.c:1711
#, fuzzy, c-format
msgid "failed to close fd in qemu with '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_monitor_text.c:1719
#, c-format
msgid "qemu does not support closing of file handles: %s"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1747
#, fuzzy, c-format
msgid "failed to add host net with '%s'"
msgstr "無法取得網路「%s」"

#: src/qemu/qemu_monitor_text.c:1753
#, fuzzy, c-format
msgid "unable to add host net: %s"
msgstr "無法為網路 %s 取消定義"

#: src/qemu/qemu_monitor_text.c:1782
#, fuzzy, c-format
msgid "failed to remove host network in qemu with '%s'"
msgstr "無法取得網路「%s」"

#: src/qemu/qemu_monitor_text.c:1811
#, fuzzy, c-format
msgid "failed to add netdev with '%s'"
msgstr "無法取得網路「%s」"

#: src/qemu/qemu_monitor_text.c:1840
#, fuzzy, c-format
msgid "failed to remove netdev in qemu with '%s'"
msgstr "無法取得網路「%s」"

#: src/qemu/qemu_monitor_text.c:1875
msgid "failed to retrieve chardev info in qemu with 'info chardev'"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1960
#, c-format
msgid "cannot attach %s disk controller"
msgstr ""

#: src/qemu/qemu_monitor_text.c:1973
#, c-format
msgid "adding %s disk controller failed: %s"
msgstr ""

#: src/qemu/qemu_monitor_text.c:2059
#, fuzzy, c-format
msgid "failed to attach drive '%s'"
msgstr "無法從 %s 建立區域"

#: src/qemu/qemu_monitor_text.c:2065 src/qemu/qemu_monitor_text.c:2342
#, fuzzy
msgid "drive hotplug is not supported"
msgstr "網路 %s 已開啟\n"

#: src/qemu/qemu_monitor_text.c:2077
#, fuzzy, c-format
msgid "adding %s disk failed: %s"
msgstr "操作失敗：%s"

#: src/qemu/qemu_monitor_text.c:2132
#, c-format
msgid "cannot parse value for %s"
msgstr ""

#: src/qemu/qemu_monitor_text.c:2150
msgid "cannot query PCI addresses"
msgstr ""

#: src/qemu/qemu_monitor_text.c:2243
#, c-format
msgid "cannot detach %s device"
msgstr ""

#: src/qemu/qemu_monitor_text.c:2249
#, fuzzy, c-format
msgid "detaching %s device failed: %s"
msgstr "從 XML 檔案建立區域"

#: src/qemu/qemu_monitor_text.c:2283
#, c-format
msgid "cannot attach %s device"
msgstr ""

#: src/qemu/qemu_monitor_text.c:2299
#, fuzzy, c-format
msgid "adding %s device failed: %s"
msgstr "區域 %s 定義自 %s\n"

#: src/qemu/qemu_monitor_text.c:2336
#, fuzzy, c-format
msgid "failed to add drive '%s'"
msgstr "無法讀取描述檔 %s"

#: src/qemu/qemu_monitor_text.c:2348
#, fuzzy
msgid "open disk image file failed"
msgstr "操作失敗"

#: src/qemu/qemu_monitor_text.c:2384
#, fuzzy, c-format
msgid "cannot delete %s drive"
msgstr "非作用中區域的名稱"

#: src/qemu/qemu_monitor_text.c:2389
msgid ""
"deleting drive is not supported.  This may leak data if disk is reassigned"
msgstr ""

#: src/qemu/qemu_monitor_text.c:2402
#, fuzzy, c-format
msgid "deleting %s drive failed: %s"
msgstr "從 XML 檔案建立區域"

#: src/qemu/qemu_monitor_text.c:2438
#, fuzzy
msgid "failed to set disk password"
msgstr "無法取得 hypervisor 類型"

#: src/qemu/qemu_monitor_text.c:2444
msgid "setting disk password is not supported"
msgstr ""

#: src/qemu/qemu_monitor_text.c:2448
msgid "the disk password is incorrect"
msgstr ""

#: src/qemu/qemu_monitor_text.c:2476
#, fuzzy, c-format
msgid "failed to take snapshot using command '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_monitor_text.c:2482
#, fuzzy, c-format
msgid "Failed to take snapshot: %s"
msgstr "無法暫停區域 %s"

#: src/qemu/qemu_monitor_text.c:2487
msgid "this domain does not have a device to take snapshots"
msgstr ""

#: src/qemu/qemu_monitor_text.c:2524
#, fuzzy, c-format
msgid "failed to restore snapshot using command '%s'"
msgstr "無法從 %s 回復區域"

#: src/qemu/qemu_monitor_text.c:2531
msgid "this domain does not have a device to load snapshots"
msgstr ""

#: src/qemu/qemu_monitor_text.c:2536
#, c-format
msgid "the snapshot '%s' does not exist, and was not loaded"
msgstr ""

#: src/qemu/qemu_monitor_text.c:2582
#, fuzzy, c-format
msgid "failed to delete snapshot using command '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_monitor_text.c:2589
msgid "this domain does not have a device to delete snapshots"
msgstr ""

#: src/qemu/qemu_monitor_text.c:2625
#, fuzzy, c-format
msgid "failed to run cmd '%s'"
msgstr "無法取得區域「%s」"

#: src/qemu/qemu_process.c:163
#, c-format
msgid "no disk found with path %s"
msgstr ""

#: src/qemu/qemu_process.c:186
#, c-format
msgid "no disk found with alias %s"
msgstr ""

#: src/qemu/qemu_process.c:206
#, c-format
msgid "disk %s does not have any encryption information"
msgstr ""

#: src/qemu/qemu_process.c:214
msgid "cannot find secrets without a connection"
msgstr ""

#: src/qemu/qemu_process.c:222 src/storage/storage_backend.c:457
msgid "secret storage not supported"
msgstr ""

#: src/qemu/qemu_process.c:231
#, fuzzy, c-format
msgid "invalid <encryption> for volume %s"
msgstr "無效的連線指標，於 %s"

#: src/qemu/qemu_process.c:249
#, c-format
msgid "format='qcow' passphrase for %s must not contain a '\\0'"
msgstr ""

#: src/qemu/qemu_process.c:631
#, fuzzy, c-format
msgid "Failed to set security context for monitor for %s"
msgstr "無法從 %s 回復區域"

#: src/qemu/qemu_process.c:650
#, fuzzy, c-format
msgid "Failed to clear security context for monitor for %s"
msgstr "無法從 %s 建立網路"

#: src/qemu/qemu_process.c:699 src/qemu/qemu_process.c:730
#: src/uml/uml_driver.c:864
msgid "Unable to set VM logfile close-on-exec flag"
msgstr ""

#: src/qemu/qemu_process.c:716
#, fuzzy, c-format
msgid "failed to build logfile name %s/%s.log"
msgstr "無法寫入設定檔"

#: src/qemu/qemu_process.c:737
#, fuzzy, c-format
msgid "Unable to seek to %lld in %s"
msgstr "無法刪除區域 %s"

#: src/qemu/qemu_process.c:792
#, c-format
msgid "Failure while reading %s log output"
msgstr ""

#: src/qemu/qemu_process.c:814
#, c-format
msgid "Out of space while reading %s log output: %s"
msgstr ""

#: src/qemu/qemu_process.c:821
#, c-format
msgid "Process exited while reading %s log output: %s"
msgstr ""

#: src/qemu/qemu_process.c:836
#, c-format
msgid "Timed out while reading %s log output: %s"
msgstr ""

#: src/qemu/qemu_process.c:918
#, fuzzy, c-format
msgid "no assigned pty for device %s"
msgstr "找不到裝置 %s 的來源資訊"

#: src/qemu/qemu_process.c:1058
#, c-format
msgid "process exited while connecting to monitor: %s"
msgstr ""

#: src/qemu/qemu_process.c:1106
#, c-format
msgid "got wrong number of vCPU pids from QEMU monitor. got %d, wanted %d"
msgstr ""

#: src/qemu/qemu_process.c:1574
#, c-format
msgid "cannot find PCI address for VirtIO disk %s"
msgstr ""

#: src/qemu/qemu_process.c:1588
#, c-format
msgid "cannot find PCI address for %s NIC"
msgstr ""

#: src/qemu/qemu_process.c:1602
#, c-format
msgid "cannot find PCI address for controller %s"
msgstr ""

#: src/qemu/qemu_process.c:1616
#, c-format
msgid "cannot find PCI address for video adapter %s"
msgstr ""

#: src/qemu/qemu_process.c:1630
#, c-format
msgid "cannot find PCI address for sound adapter %s"
msgstr ""

#: src/qemu/qemu_process.c:1643
#, c-format
msgid "cannot find PCI address for watchdog %s"
msgstr ""

#: src/qemu/qemu_process.c:1655
#, c-format
msgid "cannot find PCI address for balloon %s"
msgstr ""

#: src/qemu/qemu_process.c:1774
#, c-format
msgid "Unable to pre-create chardev file '%s'"
msgstr ""

#: src/qemu/qemu_process.c:2017 src/uml/uml_driver.c:819
#, fuzzy
msgid "VM is already active"
msgstr "區域已經啟動"

#: src/qemu/qemu_process.c:2083
#, fuzzy, c-format
msgid "cannot stat fd %d"
msgstr "無狀態"

#: src/qemu/qemu_process.c:2113
msgid "Unable to find an unused SPICE port"
msgstr ""

#: src/qemu/qemu_process.c:2121
msgid "Unable to find an unused SPICE TLS port"
msgstr ""

#: src/qemu/qemu_process.c:2134 src/uml/uml_driver.c:841
#, c-format
msgid "cannot create log directory %s"
msgstr ""

#: src/qemu/qemu_process.c:2174
#, c-format
msgid "Cannot remove stale PID file for %s"
msgstr ""

#: src/qemu/qemu_process.c:2181
#, fuzzy
msgid "Failed to build pidfile path."
msgstr "無法讀取描述檔 %s"

#: src/qemu/qemu_process.c:2280
#, fuzzy, c-format
msgid "Domain %s didn't show up"
msgstr "區域 %s 已傾印至 %s\n"

#: src/qemu/qemu_process.c:2441
#, c-format
msgid "failed to remove ebtables rule to allow MAC address on  '%s'"
msgstr ""

#: src/qemu/qemu_process.c:2451
#, fuzzy, c-format
msgid "Failed to send SIGTERM to %s (%d)"
msgstr "無法將區域 %s 存至 %s"

#: src/remote/remote_driver.c:332
#, fuzzy
msgid "failed to find libvirtd binary"
msgstr "無法為網路 %s 取消定義"

#: src/remote/remote_driver.c:415
msgid ""
"remote_open: transport in URL not recognised (should be tls|unix|ssh|ext|tcp)"
msgstr ""

#: src/remote/remote_driver.c:585
msgid "remote_open: for 'ext' transport, command is required"
msgstr ""

#: src/remote/remote_driver.c:608 src/xen/xend_internal.c:714
#, fuzzy, c-format
msgid "unable to resolve hostname '%s': %s"
msgstr "無法暫停區域 %s"

#: src/remote/remote_driver.c:658
#, fuzzy, c-format
msgid "unable to connect to libvirtd at '%s'"
msgstr "無法連上 %s"

#: src/remote/remote_driver.c:704
#, c-format
msgid "Socket %s too big for destination"
msgstr ""

#: src/remote/remote_driver.c:715
#, fuzzy
msgid "unable to create socket"
msgstr "無法讀取插槽 %d\n"

#: src/remote/remote_driver.c:738
#, c-format
msgid "unable to connect to '%s', libvirtd may need to be started"
msgstr ""

#: src/remote/remote_driver.c:807 src/remote/remote_driver.c:813
#, fuzzy
msgid "unable to create socket pair"
msgstr "無法讀取插槽 %d\n"

#: src/remote/remote_driver.c:839
msgid "transport methods unix, ssh and ext are not supported under Windows"
msgstr ""

#: src/remote/remote_driver.c:849 src/remote/remote_driver.c:855
msgid "unable to make socket non-blocking"
msgstr ""

#: src/remote/remote_driver.c:861
msgid "unable to make pipe"
msgstr ""

#: src/remote/remote_driver.c:896
#, fuzzy
msgid "unable to auto-detect URI"
msgstr "無法取得區域 UUID"

#: src/remote/remote_driver.c:1142
#, c-format
msgid "Cannot access %s '%s'"
msgstr ""

#: src/remote/remote_driver.c:1183
#, fuzzy, c-format
msgid "unable to allocate TLS credentials: %s"
msgstr "無法分配節點"

#: src/remote/remote_driver.c:1267
#, c-format
msgid "unable to load CA certificate: %s"
msgstr ""

#: src/remote/remote_driver.c:1282
#, c-format
msgid "unable to load private key/certificate: %s"
msgstr ""

#: src/remote/remote_driver.c:1343
#, c-format
msgid "unable to initialize TLS client: %s"
msgstr ""

#: src/remote/remote_driver.c:1352
#, c-format
msgid "unable to set TLS algorithm priority: %s"
msgstr ""

#: src/remote/remote_driver.c:1361
#, c-format
msgid "unable to set certificate priority: %s"
msgstr ""

#: src/remote/remote_driver.c:1371
#, c-format
msgid "unable to set session credentials: %s"
msgstr ""

#: src/remote/remote_driver.c:1393
#, c-format
msgid "unable to complete TLS handshake: %s"
msgstr ""

#: src/remote/remote_driver.c:1416
#, c-format
msgid "unable to complete TLS initialization: %s"
msgstr ""

#: src/remote/remote_driver.c:1422
msgid "server verification (of our certificate or IP address) failed"
msgstr ""

#: src/remote/remote_driver.c:1456
#, c-format
msgid "unable to verify server certificate: %s"
msgstr ""

#: src/remote/remote_driver.c:1463
msgid "cannot get current time"
msgstr ""

#: src/remote/remote_driver.c:1468
#, fuzzy
msgid "Invalid certificate"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/remote/remote_driver.c:1471
msgid "The certificate is not trusted."
msgstr ""

#: src/remote/remote_driver.c:1474
msgid "The certificate hasn't got a known issuer."
msgstr ""

#: src/remote/remote_driver.c:1477
msgid "The certificate has been revoked."
msgstr ""

#: src/remote/remote_driver.c:1481
msgid "The certificate uses an insecure algorithm"
msgstr ""

#: src/remote/remote_driver.c:1485
#, c-format
msgid "server certificate failed validation: %s"
msgstr ""

#: src/remote/remote_driver.c:1491
msgid "Certificate type is not X.509"
msgstr ""

#: src/remote/remote_driver.c:1496
msgid "gnutls_certificate_get_peers failed"
msgstr ""

#: src/remote/remote_driver.c:1506
#, c-format
msgid "unable to initialize certificate: %s"
msgstr ""

#: src/remote/remote_driver.c:1514
#, fuzzy, c-format
msgid "unable to import certificate: %s"
msgstr "無法寫入設定檔：%s"

#: src/remote/remote_driver.c:1521
msgid "The certificate has expired"
msgstr ""

#: src/remote/remote_driver.c:1528
msgid "The certificate is not yet activated"
msgstr ""

#: src/remote/remote_driver.c:1536
#, c-format
msgid "Certificate's owner does not match the hostname (%s)"
msgstr ""

#: src/remote/remote_driver.c:1952
#, c-format
msgid "too many NUMA cells: %d > %d"
msgstr ""

#: src/remote/remote_driver.c:2014 src/remote/remote_driver.c:2028
#, fuzzy, c-format
msgid "too many remote domain IDs: %d > %d"
msgstr "過多區域"

#: src/remote/remote_driver.c:2542 src/remote/remote_driver.c:2711
#: src/remote/remote_driver.c:4034
#, fuzzy
msgid "unknown parameter type"
msgstr "未知的作業系統類型"

#: src/remote/remote_driver.c:2592
msgid ""
"remoteDomainGetMemoryParameters: returned number of parameters exceeds limit"
msgstr ""

#: src/remote/remote_driver.c:2611 src/remote/remote_driver.c:2780
#: src/remote/remote_driver.c:3956
#, c-format
msgid "Parameter %s too big for destination"
msgstr ""

#: src/remote/remote_driver.c:2643
msgid "remoteDomainGetMemoryParameters: unknown parameter type"
msgstr ""

#: src/remote/remote_driver.c:2761
msgid ""
"remoteDomainGetBlkioParameters: returned number of parameters exceeds limit"
msgstr ""

#: src/remote/remote_driver.c:2812
msgid "remoteDomainGetBlkioParameters: unknown parameter type"
msgstr ""

#: src/remote/remote_driver.c:3022
#, c-format
msgid "map length greater than maximum: %d > %d"
msgstr ""

#: src/remote/remote_driver.c:3061
#, c-format
msgid "vCPU count exceeds maximum: %d > %d"
msgstr ""

#: src/remote/remote_driver.c:3067
#, c-format
msgid "vCPU map buffer length exceeds maximum: %d > %d"
msgstr ""

#: src/remote/remote_driver.c:3084
#, c-format
msgid "host reports too many vCPUs: %d > %d"
msgstr ""

#: src/remote/remote_driver.c:3090
#, c-format
msgid "host reports map buffer length exceeds maximum: %d > %d"
msgstr ""

#: src/remote/remote_driver.c:3165
#, c-format
msgid "security label exceeds maximum: %zd"
msgstr ""

#: src/remote/remote_driver.c:3200
#, c-format
msgid "security model exceeds maximum: %zd"
msgstr ""

#: src/remote/remote_driver.c:3209
#, c-format
msgid "security doi exceeds maximum: %zd"
msgstr ""

#: src/remote/remote_driver.c:3451
msgid "caller ignores cookie or cookielen"
msgstr ""

#: src/remote/remote_driver.c:3460
msgid "caller ignores uri_out"
msgstr ""

#: src/remote/remote_driver.c:3529 src/remote/remote_driver.c:3543
#, fuzzy, c-format
msgid "too many remote domain names: %d > %d"
msgstr "過多區域"

#: src/remote/remote_driver.c:3946
msgid ""
"remoteDomainGetSchedulerParameters: returned number of parameters exceeds "
"limit"
msgstr ""

#: src/remote/remote_driver.c:3976
msgid "remoteDomainGetSchedulerParameters: unknown parameter type"
msgstr ""

#: src/remote/remote_driver.c:4144
#, fuzzy, c-format
msgid "too many memory stats requested: %d > %d"
msgstr "在 %s 中註冊太多驅動程式"

#: src/remote/remote_driver.c:4188
#, c-format
msgid "block peek request too large for remote protocol, %zi > %d"
msgstr ""

#: src/remote/remote_driver.c:4209 src/remote/remote_driver.c:4260
msgid "returned buffer is not same size as requested"
msgstr ""

#: src/remote/remote_driver.c:4240
#, c-format
msgid "memory peek request too large for remote protocol, %zi > %d"
msgstr ""

#: src/remote/remote_driver.c:4479 src/remote/remote_driver.c:4493
#: src/remote/remote_driver.c:4561 src/remote/remote_driver.c:4575
#, fuzzy, c-format
msgid "too many remote networks: %d > %d"
msgstr "過多連線"

#: src/remote/remote_driver.c:5034 src/remote/remote_driver.c:5048
#: src/remote/remote_driver.c:5115 src/remote/remote_driver.c:5129
#, fuzzy, c-format
msgid "too many remote interfaces: %d > %d"
msgstr "在 %s 中註冊太多驅動程式"

#: src/remote/remote_driver.c:5474 src/remote/remote_driver.c:5552
#, fuzzy
msgid "too many storage pools requested"
msgstr "註冊太多驅動程式"

#: src/remote/remote_driver.c:5486 src/remote/remote_driver.c:5564
#, fuzzy
msgid "too many storage pools received"
msgstr "註冊太多驅動程式"

#: src/remote/remote_driver.c:6116
#, fuzzy
msgid "too many storage volumes requested"
msgstr "註冊太多驅動程式"

#: src/remote/remote_driver.c:6129
#, fuzzy
msgid "too many storage volumes received"
msgstr "註冊太多驅動程式"

#: src/remote/remote_driver.c:6550
#, fuzzy
msgid "too many device names requested"
msgstr "註冊太多驅動程式"

#: src/remote/remote_driver.c:6564
#, fuzzy
msgid "too many device names received"
msgstr "註冊太多驅動程式"

#: src/remote/remote_driver.c:6713
#, fuzzy
msgid "too many capability names requested"
msgstr "註冊太多驅動程式"

#: src/remote/remote_driver.c:6726
msgid "too many capability names received"
msgstr ""

#: src/remote/remote_driver.c:7036 src/remote/remote_driver.c:7050
#, c-format
msgid "too many remote nwfilters: %d > %d"
msgstr ""

#: src/remote/remote_driver.c:7202
#, fuzzy, c-format
msgid "unknown authentication type %s"
msgstr "操作失敗：%s"

#: src/remote/remote_driver.c:7211
#, c-format
msgid "requested authentication type %s rejected"
msgstr ""

#: src/remote/remote_driver.c:7250
#, fuzzy, c-format
msgid "unsupported authentication type %d"
msgstr "操作失敗"

#: src/remote/remote_driver.c:7460
#, fuzzy, c-format
msgid "failed to initialize SASL library: %d (%s)"
msgstr "無法為 S-Expr 製作序列號：%s"

#: src/remote/remote_driver.c:7469
#, fuzzy
msgid "failed to get sock address"
msgstr "無法取得 hypervisor 類型"

#: src/remote/remote_driver.c:7479
#, fuzzy
msgid "failed to get peer address"
msgstr "無法取得能力方面的資訊"

#: src/remote/remote_driver.c:7503
#, fuzzy, c-format
msgid "Failed to create SASL client context: %d (%s)"
msgstr "無法建立非運作中的區域 %s\n"

#: src/remote/remote_driver.c:7515
msgid "invalid cipher size for TLS session"
msgstr ""

#: src/remote/remote_driver.c:7524
#, c-format
msgid "cannot set external SSF %d (%s)"
msgstr ""

#: src/remote/remote_driver.c:7542
#, c-format
msgid "cannot set security props %d (%s)"
msgstr ""

#: src/remote/remote_driver.c:7559
#, fuzzy, c-format
msgid "SASL mechanism %s not supported by server"
msgstr "不支援 hypervisor"

#: src/remote/remote_driver.c:7577
#, fuzzy, c-format
msgid "Failed to start SASL negotiation: %d (%s)"
msgstr "無法開啟區域 %s"

#: src/remote/remote_driver.c:7592 src/remote/remote_driver.c:7665
#, fuzzy
msgid "Failed to make auth credentials"
msgstr "無法存入內容"

#: src/remote/remote_driver.c:7613
#, c-format
msgid "SASL negotiation data too long: %d bytes"
msgstr ""

#: src/remote/remote_driver.c:7652
#, fuzzy, c-format
msgid "Failed SASL step: %d (%s)"
msgstr "無法開啟區域 %s"

#: src/remote/remote_driver.c:7674 src/remote/remote_driver.c:7806
#, fuzzy
msgid "Failed to collect auth credentials"
msgstr "無法連上 hypervisor"

#: src/remote/remote_driver.c:7676
#, fuzzy
msgid "No authentication callback available"
msgstr "操作失敗"

#: src/remote/remote_driver.c:7731
#, c-format
msgid "negotiation SSF %d was not strong enough"
msgstr ""

#: src/remote/remote_driver.c:7841 src/remote/remote_driver.c:9525
msgid "no event support"
msgstr ""

#: src/remote/remote_driver.c:7846 src/remote/remote_driver.c:9532
msgid "adding cb to list"
msgstr ""

#: src/remote/remote_driver.c:7876 src/remote/remote_driver.c:9575
#, fuzzy
msgid "marking cb for deletion"
msgstr "區域 vcpu 的資訊"

#: src/remote/remote_driver.c:7882 src/remote/remote_driver.c:9581
msgid "removing cb from list"
msgstr ""

#: src/remote/remote_driver.c:7918
msgid "unable to demarshall lifecycle event"
msgstr ""

#: src/remote/remote_driver.c:7945 src/remote/remote_driver.c:7972
#: src/remote/remote_driver.c:7999 src/remote/remote_driver.c:8026
#: src/remote/remote_driver.c:8056 src/remote/remote_driver.c:8092
msgid "unable to demarshall reboot event"
msgstr ""

#: src/remote/remote_driver.c:8262 src/remote/remote_driver.c:8275
#, c-format
msgid "too many remote secret UUIDs: %d > %d"
msgstr ""

#: src/remote/remote_driver.c:8594 src/remote/remote_driver.c:9818
msgid "xdr_remote_message_header failed"
msgstr ""

#: src/remote/remote_driver.c:8603
#, c-format
msgid "data size %zu too large for payload %d"
msgstr ""

#: src/remote/remote_driver.c:8615 src/remote/remote_driver.c:9839
msgid "xdr_u_int (length word)"
msgstr ""

#: src/remote/remote_driver.c:8857
#, fuzzy
msgid "multiple stream callbacks not supported"
msgstr "呼叫函式庫失敗，可能並不支援"

#: src/remote/remote_driver.c:8897 src/remote/remote_driver.c:8924
msgid "no stream callback registered"
msgstr ""

#: src/remote/remote_driver.c:9324
#, c-format
msgid "too many remote domain snapshot names: %d > %d"
msgstr ""

#: src/remote/remote_driver.c:9341
#, c-format
msgid "too many remote domain snapshots: %d > %d"
msgstr ""

#: src/remote/remote_driver.c:9568
#, c-format
msgid "unable to find callback ID %d"
msgstr ""

#: src/remote/remote_driver.c:9823
msgid "marshalling args"
msgstr ""

#: src/remote/remote_driver.c:9882
msgid "cannot send data"
msgstr ""

#: src/remote/remote_driver.c:9910
#, fuzzy, c-format
msgid "failed to read from TLS socket %s"
msgstr "無法讀取插槽 %d\n"

#: src/remote/remote_driver.c:9914
#, fuzzy
msgid "server closed connection"
msgstr "沒有有效的連線"

#: src/remote/remote_driver.c:9931
msgid "cannot recv data"
msgstr ""

#: src/remote/remote_driver.c:9937
#, c-format
msgid "cannot recv data: %s"
msgstr ""

#: src/remote/remote_driver.c:9944 src/remote/remote_driver.c:9951
#, fuzzy, c-format
msgid "server closed connection: %s"
msgstr "hypervisor 連線的 URI"

#: src/remote/remote_driver.c:9978
#, fuzzy, c-format
msgid "failed to encode SASL data: %s"
msgstr "無法暫停區域 %s"

#: src/remote/remote_driver.c:10078
#, fuzzy, c-format
msgid "failed to decode SASL data: %s"
msgstr "無法刪除區域 %s"

#: src/remote/remote_driver.c:10127
msgid "xdr_u_int (length word, reply)"
msgstr ""

#: src/remote/remote_driver.c:10134
msgid "packet received from server too small"
msgstr ""

#: src/remote/remote_driver.c:10143
msgid "packet received from server too large"
msgstr ""

#: src/remote/remote_driver.c:10188
#, fuzzy
msgid "invalid header in reply"
msgstr "無效的參數，於 %s"

#: src/remote/remote_driver.c:10204
#, c-format
msgid "unknown program (received %x, expected %x)"
msgstr ""

#: src/remote/remote_driver.c:10210
#, c-format
msgid "unknown protocol version (received %x, expected %x)"
msgstr ""

#: src/remote/remote_driver.c:10233
#, c-format
msgid "got unexpected RPC call %d from server"
msgstr ""

#: src/remote/remote_driver.c:10260
#, c-format
msgid "no call waiting for reply with serial %d"
msgstr ""

#: src/remote/remote_driver.c:10267
#, c-format
msgid "unknown procedure (received %x, expected %x)"
msgstr ""

#: src/remote/remote_driver.c:10279
msgid "unmarshalling ret"
msgstr ""

#: src/remote/remote_driver.c:10288 src/remote/remote_driver.c:10443
msgid "unmarshalling remote_error"
msgstr ""

#: src/remote/remote_driver.c:10295
#, c-format
msgid "unknown status (received %x)"
msgstr ""

#: src/remote/remote_driver.c:10622 src/remote/remote_driver.c:10626
msgid "read on wakeup fd failed"
msgstr ""

#: src/remote/remote_driver.c:10635
msgid "poll on socket failed"
msgstr ""

#: src/remote/remote_driver.c:10696
msgid "received hangup / error event on socket"
msgstr ""

#: src/remote/remote_driver.c:10777
#, fuzzy, c-format
msgid "failed to wake up polling thread: %s"
msgstr "無法將區域 %s 的核心傾印至 %s"

#: src/remote/remote_driver.c:10782
#, fuzzy
msgid "failed to wake up polling thread"
msgstr "無法存入內容"

#: src/remote/remote_driver.c:10801
#, fuzzy
msgid "failed to wait on condition"
msgstr "無法寫入設定檔"

#: src/secret/secret_driver.c:171
#, c-format
msgid "mkstemp('%s') failed"
msgstr ""

#: src/secret/secret_driver.c:175
#, c-format
msgid "fchmod('%s') failed"
msgstr ""

#: src/secret/secret_driver.c:181
#, c-format
msgid "error writing to '%s'"
msgstr ""

#: src/secret/secret_driver.c:186
#, c-format
msgid "error closing '%s'"
msgstr ""

#: src/secret/secret_driver.c:192
#, c-format
msgid "rename(%s, %s) failed"
msgstr ""

#: src/secret/secret_driver.c:242
#, c-format
msgid "cannot create '%s'"
msgstr ""

#: src/secret/secret_driver.c:349
#, c-format
msgid "<uuid> does not match secret file name '%s'"
msgstr ""

#: src/secret/secret_driver.c:376 src/secret/secret_driver.c:483
#, fuzzy, c-format
msgid "cannot open '%s'"
msgstr "無法暫停區域 %s"

#: src/secret/secret_driver.c:380
#, c-format
msgid "cannot stat '%s'"
msgstr ""

#: src/secret/secret_driver.c:385
#, c-format
msgid "'%s' file does not fit in memory"
msgstr ""

#: src/secret/secret_driver.c:394
#, c-format
msgid "cannot read '%s'"
msgstr ""

#: src/secret/secret_driver.c:401
#, fuzzy, c-format
msgid "invalid base64 in '%s'"
msgstr "無效的參數，於 %s"

#: src/secret/secret_driver.c:499
#, fuzzy, c-format
msgid "Error reading secret: %s"
msgstr "分配網路"

#: src/secret/secret_driver.c:632 src/secret/secret_driver.c:800
#: src/secret/secret_driver.c:834 src/secret/secret_driver.c:886
#: src/secret/secret_driver.c:932
#, c-format
msgid "no secret with matching uuid '%s'"
msgstr ""

#: src/secret/secret_driver.c:659
#, c-format
msgid "no secret with matching usage '%s'"
msgstr ""

#: src/secret/secret_driver.c:699
#, c-format
msgid "a secret with UUID %s already defined for use with %s"
msgstr ""

#: src/secret/secret_driver.c:719
#, c-format
msgid "a secret with UUID %s is already defined for use with %s"
msgstr ""

#: src/secret/secret_driver.c:726
msgid "cannot change private flag on existing secret"
msgstr ""

#: src/secret/secret_driver.c:774
msgid "list of secrets is inconsistent"
msgstr ""

#: src/secret/secret_driver.c:894
#, c-format
msgid "secret '%s' does not have a value"
msgstr ""

#: src/secret/secret_driver.c:901
msgid "secret is private"
msgstr ""

#: src/secret/secret_driver.c:1024
msgid "Out of memory initializing secrets"
msgstr ""

#: src/security/security_apparmor.c:84
#, fuzzy, c-format
msgid "Failed to read AppArmor profiles list '%s'"
msgstr "無法讀取描述檔 %s"

#: src/security/security_apparmor.c:133
#, fuzzy, c-format
msgid "Failed to read '%s'"
msgstr "無法暫停區域 %s"

#: src/security/security_apparmor.c:175
#, fuzzy
msgid "unable to create pipe"
msgstr "無法讀取插槽 %d\n"

#: src/security/security_apparmor.c:216
#, fuzzy
msgid "unable to write to pipe"
msgstr "無法寫入設定檔"

#: src/security/security_apparmor.c:225
#, fuzzy, c-format
msgid "Failed to reap virt-aa-helper pid %lu"
msgstr "無法讀取插槽 %d\n"

#: src/security/security_apparmor.c:231
#, c-format
msgid "Unexpected status from virt-aa-helper pid %lu: %s"
msgstr ""

#: src/security/security_apparmor.c:288
msgid "could not find libvirtd"
msgstr ""

#: src/security/security_apparmor.c:325 src/security/security_apparmor.c:349
#: src/security/security_apparmor.c:367 src/security/security_apparmor.c:674
#, c-format
msgid "cannot update AppArmor profile '%s'"
msgstr ""

#: src/security/security_apparmor.c:394
#, fuzzy, c-format
msgid "template '%s' does not exist"
msgstr "「%s」指令不存在"

#: src/security/security_apparmor.c:452 src/security/security_selinux.c:179
msgid "security label already defined for VM"
msgstr ""

#: src/security/security_apparmor.c:505
#, c-format
msgid "cannot generate AppArmor profile '%s'"
msgstr ""

#: src/security/security_apparmor.c:531
msgid "error copying profile name"
msgstr ""

#: src/security/security_apparmor.c:537
msgid "error calling profile_status()"
msgstr ""

#: src/security/security_apparmor.c:576
#, fuzzy, c-format
msgid "could not remove profile for '%s'"
msgstr "無法連上 Xen Store %s"

#: src/security/security_apparmor.c:598 src/security/security_selinux.c:953
#: src/security/security_selinux.c:982 src/security/security_selinux.c:1017
#: src/security/security_selinux.c:1084
#, c-format
msgid ""
"security label driver mismatch: '%s' model configured for domain, but "
"hypervisor driver is '%s'."
msgstr ""

#: src/security/security_apparmor.c:608
msgid "error calling aa_change_profile()"
msgstr ""

#: src/security/security_apparmor.c:662
#, fuzzy, c-format
msgid "'%s' does not exist"
msgstr "「%s」指令不存在"

#: src/security/security_apparmor.c:698
#, c-format
msgid "Invalid security label '%s'"
msgstr ""

#: src/security/security_dac.c:124
#, c-format
msgid "unable to set user and group to '%d:%d' on '%s'"
msgstr ""

#: src/security/security_dac.c:143
#, c-format
msgid "cannot resolve symlink %s"
msgstr ""

#: src/security/security_driver.c:71
#, fuzzy, c-format
msgid "Security driver %s not found"
msgstr "網路名稱或 uuid"

#: src/security/security_selinux.c:118
#, c-format
msgid "cannot open SELinux virtual domain context file '%s'"
msgstr ""

#: src/security/security_selinux.c:125
#, c-format
msgid "cannot read SELinux virtual domain context file %s"
msgstr ""

#: src/security/security_selinux.c:137
#, c-format
msgid "cannot open SELinux virtual image context file %s"
msgstr ""

#: src/security/security_selinux.c:144
#, c-format
msgid "cannot read SELinux virtual image context file %s"
msgstr ""

#: src/security/security_selinux.c:200 src/security/security_selinux.c:206
#, c-format
msgid "cannot generate selinux context for %s"
msgstr ""

#: src/security/security_selinux.c:240 src/security/security_selinux.c:308
#, c-format
msgid "unable to get PID %d security context"
msgstr ""

#: src/security/security_selinux.c:315
#, c-format
msgid "security label exceeds maximum length: %d"
msgstr ""

#: src/security/security_selinux.c:328
msgid "error calling security_getenforce()"
msgstr ""

#: src/security/security_selinux.c:362
#, c-format
msgid "unable to set security context '%s' on '%s'"
msgstr ""

#: src/security/security_selinux.c:401
#, fuzzy, c-format
msgid "unable to set security context '%s' on fd %d"
msgstr "無法從 %s 回復區域"

#: src/security/security_selinux.c:834 src/security/security_selinux.c:1137
#, fuzzy, c-format
msgid "unknown smartcard type %d"
msgstr "未知的作業系統類型 %s"

#: src/security/security_selinux.c:963
#, c-format
msgid "Invalid security label %s"
msgstr ""

#: src/security/security_selinux.c:992
#, c-format
msgid "unable to set security context '%s'"
msgstr ""

#: src/security/security_selinux.c:1026
#, c-format
msgid "unable to allocate socket security context '%s'"
msgstr ""

#: src/security/security_selinux.c:1033
#, c-format
msgid "unable to get current process context '%s'"
msgstr ""

#: src/security/security_selinux.c:1040 src/security/security_selinux.c:1056
#, c-format
msgid "unable to set socket security context '%s'"
msgstr ""

#: src/security/security_selinux.c:1047
#, c-format
msgid "unable to set socket security context range '%s'"
msgstr ""

#: src/security/security_selinux.c:1094
#, c-format
msgid "unable to clear socket security context '%s'"
msgstr ""

#: src/security/virt-aa-helper.c:87
#, c-format
msgid ""
"\n"
"%s [options] [< def.xml]\n"
"\n"
"  Options:\n"
"    -a | --add                     load profile\n"
"    -c | --create                  create profile from template\n"
"    -D | --delete                  unload and delete profile\n"
"    -f | --add-file <file>         add file to profile\n"
"    -F | --append-file <file>      append file to profile\n"
"    -r | --replace                 reload profile\n"
"    -R | --remove                  unload profile\n"
"    -h | --help                    this help\n"
"    -u | --uuid <uuid>             uuid (profile name)\n"
"\n"
msgstr ""

#: src/security/virt-aa-helper.c:100
msgid ""
"This command is intended to be used by libvirtd and not used directly.\n"
msgstr ""

#: src/security/virt-aa-helper.c:108
#, fuzzy, c-format
msgid "%s: error: %s%c"
msgstr "%s：錯誤："

#: src/security/virt-aa-helper.c:120
#, fuzzy, c-format
msgid "%s: warning: %s%c"
msgstr "警告"

#: src/security/virt-aa-helper.c:126
#, c-format
msgid ""
"%s:\n"
"%s%c"
msgstr ""

#: src/security/virt-aa-helper.c:143
#, fuzzy
msgid "could not find replacement string"
msgstr "無法連上 Xen Store %s"

#: src/security/virt-aa-helper.c:148
#, fuzzy
msgid "could not allocate memory for string"
msgstr "無法分配節點"

#: src/security/virt-aa-helper.c:160 src/security/virt-aa-helper.c:168
msgid "not enough space in target buffer"
msgstr ""

#: src/security/virt-aa-helper.c:176
#, fuzzy
msgid "error replacing string"
msgstr "分配網路"

#: src/security/virt-aa-helper.c:197
#, fuzzy
msgid "invalid flag"
msgstr "無效的參數，於 "

#: src/security/virt-aa-helper.c:205 src/security/virt-aa-helper.c:1169
msgid "profile name exceeds maximum length"
msgstr ""

#: src/security/virt-aa-helper.c:210
#, fuzzy
msgid "profile does not exist"
msgstr "「%s」指令不存在"

#: src/security/virt-aa-helper.c:219
#, fuzzy
msgid "failed to run apparmor_parser"
msgstr "無法取得區域「%s」"

#: src/security/virt-aa-helper.c:223
msgid "unable to unload already unloaded profile"
msgstr ""

#: src/security/virt-aa-helper.c:225
msgid "apparmor_parser exited with error"
msgstr ""

#: src/security/virt-aa-helper.c:257 src/security/virt-aa-helper.c:262
#: src/security/virt-aa-helper.c:374
#, fuzzy
msgid "could not allocate memory for profile"
msgstr "無法分配節點"

#: src/security/virt-aa-helper.c:269 src/security/virt-aa-helper.c:369
#, fuzzy
msgid "invalid length for new profile"
msgstr "無效的網路指標，於 "

#: src/security/virt-aa-helper.c:281
#, fuzzy
msgid "failed to create include file"
msgstr "無法寫入設定檔"

#: src/security/virt-aa-helper.c:287 src/security/virt-aa-helper.c:394
#, fuzzy
msgid "failed to write to profile"
msgstr "無法寫入設定檔"

#: src/security/virt-aa-helper.c:292 src/security/virt-aa-helper.c:399
#, fuzzy
msgid "failed to close or write to profile"
msgstr "無法寫入設定檔"

#: src/security/virt-aa-helper.c:323 src/security/virt-aa-helper.c:1187
msgid "profile exists"
msgstr ""

#: src/security/virt-aa-helper.c:329
msgid "template name exceeds maximum length"
msgstr ""

#: src/security/virt-aa-helper.c:334
#, fuzzy
msgid "template does not exist"
msgstr "「%s」指令不存在"

#: src/security/virt-aa-helper.c:339
#, fuzzy
msgid "failed to read AppArmor template"
msgstr "無法從 Xen 系統程式讀取"

#: src/security/virt-aa-helper.c:344 src/security/virt-aa-helper.c:349
msgid "no replacement string in template"
msgstr ""

#: src/security/virt-aa-helper.c:355
#, fuzzy
msgid "could not allocate memory for profile name"
msgstr "無法分配節點"

#: src/security/virt-aa-helper.c:361
#, fuzzy
msgid "could not allocate memory for profile files"
msgstr "無法分配節點"

#: src/security/virt-aa-helper.c:388
#, fuzzy
msgid "failed to create profile"
msgstr "無法寫入設定檔"

#: src/security/virt-aa-helper.c:538
msgid "bad pathname"
msgstr ""

#: src/security/virt-aa-helper.c:553
msgid "path does not exist, skipping file type checks"
msgstr ""

#: src/security/virt-aa-helper.c:603
#, fuzzy
msgid "could not get XML error"
msgstr "無法取得區域「%s」"

#: src/security/virt-aa-helper.c:619
#, fuzzy
msgid "Invalid context"
msgstr "無效的參數，於 "

#: src/security/virt-aa-helper.c:625
#, fuzzy
msgid "Could not find <name>"
msgstr "無法為區域 %s 取消定義"

#: src/security/virt-aa-helper.c:632
#, fuzzy
msgid "Could not find <uuid>"
msgstr "無法為區域 %s 取消定義"

#: src/security/virt-aa-helper.c:686 src/security/virt-aa-helper.c:710
#: src/security/virt-aa-helper.c:743 src/security/virt-aa-helper.c:755
#: src/security/virt-aa-helper.c:889 src/security/virt-aa-helper.c:1227
#, fuzzy
msgid "could not allocate memory"
msgstr "無法分配節點"

#: src/security/virt-aa-helper.c:697
msgid "os.type is not 'hvm'"
msgstr ""

#: src/security/virt-aa-helper.c:762
#, fuzzy
msgid "could not parse XML"
msgstr "無法讀取插槽 %d\n"

#: src/security/virt-aa-helper.c:767
#, fuzzy
msgid "could not find name in XML"
msgstr "無法為區域 %s 取消定義"

#: src/security/virt-aa-helper.c:772
msgid "bad name"
msgstr ""

#: src/security/virt-aa-helper.c:798
msgid "  skipped non-absolute path"
msgstr ""

#: src/security/virt-aa-helper.c:805
#, fuzzy
msgid "  could not find realpath for disk"
msgstr "無法連上 Xen Store %s"

#: src/security/virt-aa-helper.c:819
msgid "  skipped restricted file"
msgstr ""

#: src/security/virt-aa-helper.c:894
msgid "given uuid does not match XML uuid"
msgstr ""

#: src/security/virt-aa-helper.c:1015
#, fuzzy
msgid "failed to allocate file buffer"
msgstr "無法分配節點"

#: src/security/virt-aa-helper.c:1064
#, fuzzy
msgid "could not allocate memory for disk"
msgstr "無法分配節點"

#: src/security/virt-aa-helper.c:1079 src/security/virt-aa-helper.c:1099
#, fuzzy
msgid "invalid UUID"
msgstr "無效的參數，於 %s"

#: src/security/virt-aa-helper.c:1082
msgid "error copying UUID"
msgstr ""

#: src/security/virt-aa-helper.c:1091
#, fuzzy
msgid "unsupported option"
msgstr "分配設定"

#: src/security/virt-aa-helper.c:1096
#, fuzzy
msgid "bad command"
msgstr "非作用中區域的名稱"

#: src/security/virt-aa-helper.c:1109
#, fuzzy
msgid "could not read xml file"
msgstr "無法連上 %s"

#: src/security/virt-aa-helper.c:1113
#, fuzzy
msgid "could not get VM definition"
msgstr "無法取得區域「%s」"

#: src/security/virt-aa-helper.c:1118
#, fuzzy
msgid "invalid VM definition"
msgstr "無效的區域指標，於 "

#: src/security/virt-aa-helper.c:1150
#, fuzzy
msgid "could not set PATH"
msgstr "無法連上 %s"

#: src/security/virt-aa-helper.c:1154
#, fuzzy
msgid "could not set IFS"
msgstr "無法連上 %s"

#: src/security/virt-aa-helper.c:1165
#, fuzzy
msgid "could not parse arguments"
msgstr "無法連上 %s"

#: src/security/virt-aa-helper.c:1173
msgid "disk profile name exceeds maximum length"
msgstr ""

#: src/security/virt-aa-helper.c:1206
#, fuzzy
msgid "failed to allocate buffer"
msgstr "無法分配節點"

#: src/security/virt-aa-helper.c:1237
#, fuzzy
msgid "could not create profile"
msgstr "無法連上 %s"

#: src/storage/parthelper.c:82
#, c-format
msgid "syntax: %s DEVICE [-g]\n"
msgstr ""

#: src/storage/parthelper.c:103
#, fuzzy, c-format
msgid "unable to access device %s\n"
msgstr "無法從 %s 建立區域"

#: src/storage/parthelper.c:117
#, fuzzy, c-format
msgid "unable to access disk %s\n"
msgstr "無法開啟要讀取的 %s"

#: src/storage/storage_backend.c:140
#, fuzzy, c-format
msgid "could not open input path '%s'"
msgstr "無法連上 %s"

#: src/storage/storage_backend.c:178
#, fuzzy, c-format
msgid "failed reading from file '%s'"
msgstr "無法讀取設定檔 %s"

#: src/storage/storage_backend.c:195 src/storage/storage_backend.c:307
#, c-format
msgid "cannot extend file '%s'"
msgstr ""

#: src/storage/storage_backend.c:202
#, fuzzy, c-format
msgid "failed writing to file '%s'"
msgstr "無法寫入設定檔"

#: src/storage/storage_backend.c:213 src/storage/storage_backend.c:282
#: src/storage/storage_backend_logical.c:646
#, c-format
msgid "cannot close file '%s'"
msgstr ""

#: src/storage/storage_backend.c:246 src/storage/storage_backend.c:396
#: src/storage/storage_backend.c:403 src/storage/storage_backend_fs.c:572
#: src/storage/storage_backend_fs.c:599 src/storage/storage_backend_fs.c:838
#, c-format
msgid "cannot create path '%s'"
msgstr ""

#: src/storage/storage_backend.c:261 src/util/util.c:1392 src/util/util.c:1433
#: src/util/util.c:1611 src/util/util.c:1732
#, c-format
msgid "stat of '%s' failed"
msgstr ""

#: src/storage/storage_backend.c:270 src/util/util.c:1398 src/util/util.c:1439
#: src/util/util.c:1617
#, c-format
msgid "cannot chown '%s' to (%u, %u)"
msgstr ""

#: src/storage/storage_backend.c:276 src/storage/storage_backend.c:590
#: src/util/util.c:1406 src/util/util.c:1447 src/util/util.c:1625
#: src/util/util.c:1745
#, c-format
msgid "cannot set mode of '%s' to %04o"
msgstr ""

#: src/storage/storage_backend.c:335 src/storage/storage_backend.c:344
#, c-format
msgid "cannot fill file '%s'"
msgstr ""

#: src/storage/storage_backend.c:354
#, c-format
msgid "cannot sync data to file '%s'"
msgstr ""

#: src/storage/storage_backend.c:380 src/storage/storage_backend_disk.c:576
#: src/storage/storage_backend_logical.c:595
msgid "storage pool does not support encrypted volumes"
msgstr ""

#: src/storage/storage_backend.c:434
msgid "too many conflicts when generating an uuid"
msgstr ""

#: src/storage/storage_backend.c:464
msgid "secrets already defined"
msgstr ""

#: src/storage/storage_backend.c:532
#, c-format
msgid "Cannot set gid to %u before creating %s"
msgstr ""

#: src/storage/storage_backend.c:539
#, c-format
msgid "Cannot set uid to %u before creating %s"
msgstr ""

#: src/storage/storage_backend.c:573
#, fuzzy, c-format
msgid "%s failed to create %s"
msgstr "無法讀取插槽 %d\n"

#: src/storage/storage_backend.c:584
#, c-format
msgid "cannot chown %s to (%u, %u)"
msgstr ""

#: src/storage/storage_backend.c:623
#, c-format
msgid "Unable to read '%s -h' output"
msgstr ""

#: src/storage/storage_backend.c:683 src/storage/storage_backend.c:689
#, fuzzy, c-format
msgid "unknown storage vol type %d"
msgstr "未知的作業系統類型 %s"

#: src/storage/storage_backend.c:704
msgid "a different backing store can not be specified."
msgstr ""

#: src/storage/storage_backend.c:711
#, c-format
msgid "unknown storage vol backing store type %d"
msgstr ""

#: src/storage/storage_backend.c:717
#, c-format
msgid "inaccessible backing store volume %s"
msgstr ""

#: src/storage/storage_backend.c:729
#, c-format
msgid "qcow volume encryption unsupported with volume format %s"
msgstr ""

#: src/storage/storage_backend.c:737
#, c-format
msgid "unsupported volume encryption format %d"
msgstr ""

#: src/storage/storage_backend.c:743
msgid "too many secrets for qcow encryption"
msgstr ""

#: src/storage/storage_backend.c:903
msgid "cannot copy from volume with qcow-create"
msgstr ""

#: src/storage/storage_backend.c:909
#, c-format
msgid "unsupported storage vol type %d"
msgstr ""

#: src/storage/storage_backend.c:915
msgid "copy-on-write image not supported with qcow-create"
msgstr ""

#: src/storage/storage_backend.c:921
msgid "encrypted volumes not supported with qcow-create"
msgstr ""

#: src/storage/storage_backend.c:956
#, c-format
msgid "Unknown file create tool type '%d'."
msgstr ""

#: src/storage/storage_backend.c:1004
msgid "creation of non-raw file images is not supported without qemu-img."
msgstr ""

#: src/storage/storage_backend.c:1052
#, c-format
msgid "cannot open volume '%s'"
msgstr ""

#: src/storage/storage_backend.c:1077
#, fuzzy, c-format
msgid "unexpected storage mode for '%s'"
msgstr "無預期的資料「%s」"

#: src/storage/storage_backend.c:1184
#, c-format
msgid "cannot seek to end of file '%s'"
msgstr ""

#: src/storage/storage_backend.c:1205
#, c-format
msgid "cannot get file context of '%s'"
msgstr ""

#: src/storage/storage_backend.c:1275
#, c-format
msgid "cannot seek to beginning of file '%s'"
msgstr ""

#: src/storage/storage_backend.c:1282
#, c-format
msgid "cannot read beginning of file '%s'"
msgstr ""

#: src/storage/storage_backend.c:1347
#, c-format
msgid "cannot read dir '%s'"
msgstr ""

#: src/storage/storage_backend.c:1433
#, fuzzy, c-format
msgid "Failed to compile regex %s"
msgstr "無法暫停區域 %s"

#: src/storage/storage_backend.c:1465
msgid "cannot read fd"
msgstr ""

#: src/storage/storage_backend.c:1534 src/storage/storage_backend.c:1648
#, fuzzy, c-format
msgid "failed to wait for command '%s'"
msgstr "無法取得區域「%s」"

#: src/storage/storage_backend.c:1543 src/storage/storage_backend.c:1661
msgid "command did not exit cleanly"
msgstr ""

#: src/storage/storage_backend.c:1596
#, fuzzy
msgid "cannot open file using fd"
msgstr "無法開啟檔案"

#: src/storage/storage_backend.c:1629
#, c-format
msgid "read error on pipe to '%s'"
msgstr ""

#: src/storage/storage_backend.c:1655
#, c-format
msgid "non-zero exit status from command %d"
msgstr ""

#: src/storage/storage_backend.c:1682 src/storage/storage_backend.c:1694
#, c-format
msgid "%s not implemented on Win32"
msgstr ""

#: src/storage/storage_backend_disk.c:110
msgid "cannot parse device start location"
msgstr ""

#: src/storage/storage_backend_disk.c:117
msgid "cannot parse device end location"
msgstr ""

#: src/storage/storage_backend_disk.c:394
msgid "Invalid partition type"
msgstr ""

#: src/storage/storage_backend_disk.c:403
msgid "extended partition already exists"
msgstr ""

#: src/storage/storage_backend_disk.c:438
msgid "no extended partition found and no primary partition available"
msgstr ""

#: src/storage/storage_backend_disk.c:444
#, fuzzy
msgid "unknown partition type"
msgstr "未知的作業系統類型"

#: src/storage/storage_backend_disk.c:528
msgid "no large enough free extent"
msgstr ""

#: src/storage/storage_backend_disk.c:657
#, c-format
msgid "Couldn't read volume target path '%s'"
msgstr ""

#: src/storage/storage_backend_disk.c:670
#, c-format
msgid "Volume path '%s' did not start with parent pool source device name."
msgstr ""

#: src/storage/storage_backend_disk.c:680
#, c-format
msgid "cannot parse partition number from target '%s'"
msgstr ""

#: src/storage/storage_backend_fs.c:104
#, fuzzy, c-format
msgid "cannot probe backing volume format: %s"
msgstr "未知的作業系統類型 %s"

#: src/storage/storage_backend_fs.c:178
#, fuzzy, c-format
msgid "invalid netfs path (no /): %s"
msgstr "無效的網路指標，於 %s"

#: src/storage/storage_backend_fs.c:184
#, fuzzy, c-format
msgid "invalid netfs path (ends in /): %s"
msgstr "無效的網路指標，於 %s"

#: src/storage/storage_backend_fs.c:288
#, c-format
msgid "cannot read mount list '%s'"
msgstr ""

#: src/storage/storage_backend_fs.c:379 src/storage/storage_backend_fs.c:454
#: src/storage/storage_backend_iscsi.c:648
#: src/storage/storage_backend_iscsi.c:680
#, fuzzy
msgid "missing source host"
msgstr "找不到裝置的來源資訊"

#: src/storage/storage_backend_fs.c:384
#, fuzzy
msgid "missing source path"
msgstr "找不到裝置的來源資訊"

#: src/storage/storage_backend_fs.c:390 src/storage/storage_backend_fs.c:465
#: src/storage/storage_backend_iscsi.c:655
#: src/storage/storage_backend_iscsi.c:687
#, fuzzy
msgid "missing source device"
msgstr "找不到裝置的來源資訊"

#: src/storage/storage_backend_fs.c:459
#, fuzzy
msgid "missing source dir"
msgstr "找不到裝置的來源資訊"

#: src/storage/storage_backend_fs.c:562
#, c-format
msgid "path '%s' is not absolute"
msgstr ""

#: src/storage/storage_backend_fs.c:626
#, c-format
msgid "cannot open path '%s'"
msgstr ""

#: src/storage/storage_backend_fs.c:689
#, fuzzy, c-format
msgid "cannot probe backing volume info: %s"
msgstr "無法連上 %s"

#: src/storage/storage_backend_fs.c:706
#, c-format
msgid "cannot statvfs path '%s'"
msgstr ""

#: src/storage/storage_backend_fs.c:773
#, fuzzy, c-format
msgid "failed to remove pool '%s'"
msgstr "無法取得區域「%s」"

#: src/storage/storage_backend_fs.c:824
msgid "cannot copy from volume to a directory volume"
msgstr ""

#: src/storage/storage_backend_fs.c:858
msgid ""
"storage pool does not support building encrypted volumes from other volumes"
msgstr ""

#: src/storage/storage_backend_fs.c:878
msgid "creation of non-raw images is not supported without qemu-img"
msgstr ""

#: src/storage/storage_backend_fs.c:925
#, c-format
msgid "cannot unlink file '%s'"
msgstr ""

#: src/storage/storage_backend_iscsi.c:66
#, fuzzy, c-format
msgid "host lookup failed %s"
msgstr "操作失敗：%s"

#: src/storage/storage_backend_iscsi.c:73
#, c-format
msgid "no IP address for target %s"
msgstr ""

#: src/storage/storage_backend_iscsi.c:82
#, c-format
msgid "cannot format ip addr for %s"
msgstr ""

#: src/storage/storage_backend_iscsi.c:169
msgid "cannot find session"
msgstr ""

#: src/storage/storage_backend_iscsi.c:196
#, c-format
msgid "Could not allocate memory for output of '%s'"
msgstr ""

#: src/storage/storage_backend_iscsi.c:205
#, c-format
msgid "Failed to run '%s' when looking for existing interface with IQN '%s'"
msgstr ""

#: src/storage/storage_backend_iscsi.c:214
#, c-format
msgid ""
"Failed to open stream for file descriptor when reading output from '%s': '%s'"
msgstr ""

#: src/storage/storage_backend_iscsi.c:226
#, c-format
msgid "Unexpected line > %d characters when parsing output of '%s'"
msgstr ""

#: src/storage/storage_backend_iscsi.c:275
msgid "Failed to initialize random generator when creating iscsi interface"
msgstr ""

#: src/storage/storage_backend_iscsi.c:296
#, c-format
msgid "Failed to run command '%s' to create new iscsi interface"
msgstr ""

#: src/storage/storage_backend_iscsi.c:312
#, c-format
msgid "Failed to run command '%s' to update iscsi interface with IQN '%s'"
msgstr ""

#: src/storage/storage_backend_iscsi.c:421
#, c-format
msgid "Failed to get host number for iSCSI session with path '%s'"
msgstr ""

#: src/storage/storage_backend_iscsi.c:429
#, fuzzy, c-format
msgid "Failed to find LUs on host %u"
msgstr "無法為網路 %s 取消定義"

#: src/storage/storage_backend_iscsi.c:534
#, fuzzy
msgid "iscsiadm command failed"
msgstr "無法寫入設定檔"

#: src/storage/storage_backend_iscsi.c:540
#, c-format
msgid "iscsiadm sendtargets command failed with exitstatus %d"
msgstr ""

#: src/storage/storage_backend_logical.c:153
msgid "malformed volume extent offset value"
msgstr ""

#: src/storage/storage_backend_logical.c:158
msgid "malformed volume extent length value"
msgstr ""

#: src/storage/storage_backend_logical.c:163
msgid "malformed volume extent size value"
msgstr ""

#: src/storage/storage_backend_logical.c:219
msgid "lvs command failed"
msgstr ""

#: src/storage/storage_backend_logical.c:225
#, c-format
msgid "lvs command failed with exitstatus %d"
msgstr ""

#: src/storage/storage_backend_logical.c:349
#, fuzzy
msgid "failed to get source from sourceList"
msgstr "無法取得節點資訊"

#: src/storage/storage_backend_logical.c:425
#, c-format
msgid "cannot open device '%s'"
msgstr ""

#: src/storage/storage_backend_logical.c:431
#, c-format
msgid "cannot clear device header of '%s'"
msgstr ""

#: src/storage/storage_backend_logical.c:438
#, c-format
msgid "cannot close device '%s'"
msgstr ""

#: src/storage/storage_backend_logical.c:632
#, c-format
msgid "cannot set file owner '%s'"
msgstr ""

#: src/storage/storage_backend_logical.c:639
#, c-format
msgid "cannot set file mode '%s'"
msgstr ""

#: src/storage/storage_backend_logical.c:655
#, c-format
msgid "cannot find newly created volume '%s'"
msgstr ""

#: src/storage/storage_backend_mpath.c:233
#, fuzzy, c-format
msgid "Failed to get %s minor number"
msgstr "無法取得節點資訊"

#: src/storage/storage_backend_scsi.c:65
#, c-format
msgid "Could not find typefile '%s'"
msgstr ""

#: src/storage/storage_backend_scsi.c:77
#, c-format
msgid "Could not read typefile '%s'"
msgstr ""

#: src/storage/storage_backend_scsi.c:89
#, c-format
msgid "Device type '%s' is not an integer"
msgstr ""

#: src/storage/storage_backend_scsi.c:230
#, fuzzy, c-format
msgid "Failed to update volume for '%s'"
msgstr "無法從 %s 建立區域"

#: src/storage/storage_backend_scsi.c:285
#: src/storage/storage_backend_scsi.c:374
#, fuzzy, c-format
msgid "Failed to opendir sysfs path '%s'"
msgstr "無法暫停區域 %s"

#: src/storage/storage_backend_scsi.c:332
#, fuzzy, c-format
msgid "Failed to parse block name %s"
msgstr "無法將區域 %s 存至 %s"

#: src/storage/storage_backend_scsi.c:420
#, c-format
msgid "Failed to determine if %u:%u:%u:%u is a Direct-Access LUN"
msgstr ""

#: src/storage/storage_backend_scsi.c:487
#: src/storage/storage_backend_scsi.c:529
#, fuzzy, c-format
msgid "Failed to opendir path '%s'"
msgstr "無法暫停區域 %s"

#: src/storage/storage_backend_scsi.c:572
#, c-format
msgid "Could not open '%s' to trigger host scan"
msgstr ""

#: src/storage/storage_backend_scsi.c:583
#, c-format
msgid "Write to '%s' to trigger host scan failed"
msgstr ""

#: src/storage/storage_driver.c:78
#, c-format
msgid "Missing backend %d"
msgstr ""

#: src/storage/storage_driver.c:86
#, fuzzy, c-format
msgid "Failed to initialize storage pool '%s': %s"
msgstr "無法開啟網路 %s"

#: src/storage/storage_driver.c:88 src/storage/storage_driver.c:101
#: src/storage/storage_driver.c:115
#, fuzzy
msgid "no error message found"
msgstr "無法提供錯誤訊息"

#: src/storage/storage_driver.c:99 src/storage/storage_driver.c:113
#, fuzzy, c-format
msgid "Failed to autostart storage pool '%s': %s"
msgstr "無法開啟網路 %s"

#: src/storage/storage_driver.c:280 src/storage/storage_driver.c:979
#: src/storage/storage_driver.c:1008
msgid "no pool with matching uuid"
msgstr ""

#: src/storage/storage_driver.c:305
#, c-format
msgid "no pool with matching name '%s'"
msgstr ""

#: src/storage/storage_driver.c:461 src/test/test_driver.c:3879
#, c-format
msgid "pool type '%s' does not support source discovery"
msgstr ""

#: src/storage/storage_driver.c:554
#, fuzzy, c-format
msgid "Creating storage pool '%s'"
msgstr "無法取得區域「%s」"

#: src/storage/storage_driver.c:596
#, fuzzy, c-format
msgid "Defining storage pool '%s'"
msgstr "無法取得區域「%s」"

#: src/storage/storage_driver.c:617 src/storage/storage_driver.c:672
#: src/storage/storage_driver.c:718 src/storage/storage_driver.c:755
#: src/storage/storage_driver.c:812 src/storage/storage_driver.c:862
#: src/storage/storage_driver.c:918 src/storage/storage_driver.c:954
#: src/storage/storage_driver.c:1070 src/storage/storage_driver.c:1103
#: src/storage/storage_driver.c:1148 src/storage/storage_driver.c:1279
#: src/storage/storage_driver.c:1402 src/storage/storage_driver.c:1562
#: src/storage/storage_driver.c:1624 src/storage/storage_driver.c:1833
#: src/storage/storage_driver.c:1890 src/storage/storage_driver.c:1971
#: src/storage/storage_driver.c:2024 src/storage/storage_driver.c:2071
msgid "no storage pool with matching uuid"
msgstr ""

#: src/storage/storage_driver.c:623
msgid "pool is still active"
msgstr ""

#: src/storage/storage_driver.c:629 src/storage/storage_driver.c:770
#: src/storage/storage_driver.c:827 src/storage/storage_driver.c:877
#, c-format
msgid "pool '%s' has asynchronous jobs running."
msgstr ""

#: src/storage/storage_driver.c:639
#, fuzzy, c-format
msgid "Failed to delete autostart link '%s': %s"
msgstr "無法將區域 %s 存至 %s"

#: src/storage/storage_driver.c:646
#, fuzzy, c-format
msgid "Undefining storage pool '%s'"
msgstr "未知的作業系統類型 %s"

#: src/storage/storage_driver.c:681
#, fuzzy
msgid "pool already active"
msgstr "區域已經啟動"

#: src/storage/storage_driver.c:694
#, fuzzy, c-format
msgid "Starting up storage pool '%s'"
msgstr "無法取得區域「%s」"

#: src/storage/storage_driver.c:727
#, fuzzy
msgid "storage pool is already active"
msgstr "區域已經啟動"

#: src/storage/storage_driver.c:764 src/storage/storage_driver.c:871
#: src/storage/storage_driver.c:1076 src/storage/storage_driver.c:1109
#: src/storage/storage_driver.c:1154 src/storage/storage_driver.c:1285
#: src/storage/storage_driver.c:1415 src/storage/storage_driver.c:1421
#: src/storage/storage_driver.c:1568 src/storage/storage_driver.c:1630
#: src/storage/storage_driver.c:1839 src/storage/storage_driver.c:1896
#: src/storage/storage_driver.c:1977 src/storage/storage_driver.c:2030
#: src/storage/storage_driver.c:2077
msgid "storage pool is not active"
msgstr ""

#: src/storage/storage_driver.c:782
#, fuzzy, c-format
msgid "Shutting down storage pool '%s'"
msgstr "無法取得網路「%s」"

#: src/storage/storage_driver.c:821
msgid "storage pool is still active"
msgstr ""

#: src/storage/storage_driver.c:834
msgid "pool does not support pool deletion"
msgstr ""

#: src/storage/storage_driver.c:839
#, fuzzy, c-format
msgid "Deleting storage pool '%s'"
msgstr "無法取得區域「%s」"

#: src/storage/storage_driver.c:1014 src/test/test_driver.c:4238
msgid "pool has no config file"
msgstr ""

#: src/storage/storage_driver.c:1162 src/storage/storage_driver.c:1431
#: src/storage/storage_driver.c:1576 src/storage/storage_driver.c:1638
#: src/storage/storage_driver.c:1847 src/storage/storage_driver.c:1907
#: src/storage/storage_driver.c:1985 src/storage/storage_driver.c:2038
#: src/storage/storage_driver.c:2085 src/test/test_driver.c:4360
#: src/test/test_driver.c:4561 src/test/test_driver.c:4637
#: src/test/test_driver.c:4715 src/test/test_driver.c:4760
#: src/test/test_driver.c:4800
#, c-format
msgid "no storage vol with matching name '%s'"
msgstr ""

#: src/storage/storage_driver.c:1202
msgid "no storage vol with matching key"
msgstr ""

#: src/storage/storage_driver.c:1253
msgid "no storage vol with matching path"
msgstr ""

#: src/storage/storage_driver.c:1298 src/test/test_driver.c:4473
#: src/test/test_driver.c:4554
msgid "storage vol already exists"
msgstr ""

#: src/storage/storage_driver.c:1310
msgid "storage pool does not support volume creation"
msgstr ""

#: src/storage/storage_driver.c:1365 src/storage/storage_driver.c:1525
#, fuzzy, c-format
msgid "Creating volume '%s' in storage pool '%s'"
msgstr "無法開啟網路 %s"

#: src/storage/storage_driver.c:1408
#, c-format
msgid "no storage pool with matching name '%s'"
msgstr ""

#: src/storage/storage_driver.c:1442
#, c-format
msgid "storage volume name '%s' already in use."
msgstr ""

#: src/storage/storage_driver.c:1458
msgid "storage pool does not support volume creation from an existing volume"
msgstr ""

#: src/storage/storage_driver.c:1464 src/storage/storage_driver.c:1583
#: src/storage/storage_driver.c:1645 src/storage/storage_driver.c:1854
#: src/storage/storage_driver.c:1914
#, c-format
msgid "volume '%s' is still being allocated."
msgstr ""

#: src/storage/storage_driver.c:1693
#, c-format
msgid "Failed to truncate volume with path '%s' to 0 bytes"
msgstr ""

#: src/storage/storage_driver.c:1702
#, fuzzy, c-format
msgid "Failed to truncate volume with path '%s' to %ju bytes"
msgstr "無法將區域 %s 存至 %s"

#: src/storage/storage_driver.c:1730
#, c-format
msgid "Failed to seek to position %ju in volume with path '%s'"
msgstr ""

#: src/storage/storage_driver.c:1743
#, c-format
msgid "Failed to write %zu bytes to storage volume with path '%s'"
msgstr ""

#: src/storage/storage_driver.c:1777
#, fuzzy, c-format
msgid "Failed to open storage volume with path '%s'"
msgstr "無法從 %s 回復區域"

#: src/storage/storage_driver.c:1784
#, fuzzy, c-format
msgid "Failed to stat storage volume with path '%s'"
msgstr "無法開啟區域 %s"

#: src/storage/storage_driver.c:1921
msgid "storage pool does not support vol deletion"
msgstr ""

#: src/storage/storage_driver.c:1931
#, c-format
msgid "Deleting volume '%s' from storage pool '%s'"
msgstr ""

#: src/test/test_driver.c:344
#, c-format
msgid "Exceeded max iface limit %d"
msgstr ""

#: src/test/test_driver.c:532 src/test/test_driver.c:1690
#: src/test/test_driver.c:2227 src/test/test_driver.c:2727
#: src/test/test_driver.c:2782
msgid "getting time of day"
msgstr "讀取當天的時間"

#: src/test/test_driver.c:685
#, c-format
msgid "node vol list for pool '%s'"
msgstr ""

#: src/test/test_driver.c:696
#, fuzzy
msgid "resolving volume filename"
msgstr "解析區域的檔名"

#: src/test/test_driver.c:786
#, fuzzy, c-format
msgid "loading host definition file '%s'"
msgstr "載入主機定義檔"

#: src/test/test_driver.c:795
#, c-format
msgid "Invalid XML in file '%s'"
msgstr ""

#: src/test/test_driver.c:803
msgid "Root element is not 'node'"
msgstr ""

#: src/test/test_driver.c:810
msgid "creating xpath context"
msgstr "建立 xpath 的內文"

#: src/test/test_driver.c:818
#, c-format
msgid "Path %s too big for destination"
msgstr ""

#: src/test/test_driver.c:828
msgid "node cpu numa nodes"
msgstr "節點的處理器 numa 節點"

#: src/test/test_driver.c:836
msgid "node cpu sockets"
msgstr "結點的處理器插槽"

#: src/test/test_driver.c:844
msgid "node cpu cores"
msgstr "節點的處理器核心"

#: src/test/test_driver.c:852
msgid "node cpu threads"
msgstr "節點的處理器執行續"

#: src/test/test_driver.c:863
msgid "node active cpu"
msgstr "節點啟用中的處理器"

#: src/test/test_driver.c:870
msgid "node cpu mhz"
msgstr "節點的處理器速度（MHz）"

#: src/test/test_driver.c:878 src/xenxs/xen_xm.c:616
#, c-format
msgid "Model %s too big for destination"
msgstr ""

#: src/test/test_driver.c:889
msgid "node memory"
msgstr "節點的記憶體"

#: src/test/test_driver.c:895
msgid "node domain list"
msgstr "節點的區域清單"

#: src/test/test_driver.c:906
msgid "resolving domain filename"
msgstr "解析區域的檔名"

#: src/test/test_driver.c:939
#, fuzzy
msgid "node network list"
msgstr "節點的區域清單"

#: src/test/test_driver.c:949
#, fuzzy
msgid "resolving network filename"
msgstr "解析區域的檔名"

#: src/test/test_driver.c:975
#, fuzzy
msgid "node interface list"
msgstr "節點的區域清單"

#: src/test/test_driver.c:985
#, fuzzy
msgid "resolving interface filename"
msgstr "解析區域的檔名"

#: src/test/test_driver.c:1011
#, fuzzy
msgid "node pool list"
msgstr "節點的區域清單"

#: src/test/test_driver.c:1023
#, fuzzy
msgid "resolving pool filename"
msgstr "解析區域的檔名"

#: src/test/test_driver.c:1062
#, fuzzy
msgid "node device list"
msgstr "節點的區域清單"

#: src/test/test_driver.c:1076
#, fuzzy
msgid "resolving device filename"
msgstr "解析區域的檔名"

#: src/test/test_driver.c:1143
msgid "testOpen: supply a path or use test:///default"
msgstr ""

#: src/test/test_driver.c:1499
#, fuzzy, c-format
msgid "domain '%s' not paused"
msgstr "區域 %s 已經存在"

#: src/test/test_driver.c:1540 src/test/test_driver.c:1581
#, fuzzy, c-format
msgid "domain '%s' not running"
msgstr "區域還在執行中"

#: src/test/test_driver.c:1734
#, c-format
msgid "saving domain '%s' failed to allocate space for metadata"
msgstr ""

#: src/test/test_driver.c:1741
#, fuzzy, c-format
msgid "saving domain '%s' to '%s': open failed"
msgstr "將區域狀態存至檔案"

#: src/test/test_driver.c:1748 src/test/test_driver.c:1754
#: src/test/test_driver.c:1760 src/test/test_driver.c:1767
#, fuzzy, c-format
msgid "saving domain '%s' to '%s': write failed"
msgstr "將區域狀態存至檔案"

#: src/test/test_driver.c:1818
#, fuzzy, c-format
msgid "cannot read domain image '%s'"
msgstr "無法從 %s 建立區域"

#: src/test/test_driver.c:1824
#, c-format
msgid "incomplete save header in '%s'"
msgstr ""

#: src/test/test_driver.c:1830
msgid "mismatched header magic"
msgstr ""

#: src/test/test_driver.c:1835
#, fuzzy, c-format
msgid "failed to read metadata length in '%s'"
msgstr "無法取得區域「%s」"

#: src/test/test_driver.c:1841
msgid "length of metadata out of range"
msgstr ""

#: src/test/test_driver.c:1850
#, fuzzy, c-format
msgid "incomplete metdata in '%s'"
msgstr "無預期的資料「%s」"

#: src/test/test_driver.c:1912
#, fuzzy, c-format
msgid "domain '%s' coredump: failed to open %s"
msgstr "區域 %s 已傾印至 %s\n"

#: src/test/test_driver.c:1918
#, c-format
msgid "domain '%s' coredump: failed to write header to %s"
msgstr ""

#: src/test/test_driver.c:1924
#, fuzzy, c-format
msgid "domain '%s' coredump: write failed: %s"
msgstr "區域 %s 已傾印至 %s\n"

#: src/test/test_driver.c:2136
#, fuzzy
msgid "cannot hotplug vcpus for an inactive domain"
msgstr "為非作用中的區域取消定義。"

#: src/test/test_driver.c:2219
#, fuzzy
msgid "cannot list vcpus for an inactive domain"
msgstr "為非作用中的區域取消定義。"

#: src/test/test_driver.c:2311
msgid "requested vcpu is higher than allocated vcpus"
msgstr ""

#: src/test/test_driver.c:2449
msgid "Range exceeds available cells"
msgstr ""

#: src/test/test_driver.c:2485
#, fuzzy, c-format
msgid "Domain '%s' is already running"
msgstr "區域已經啟動"

#: src/test/test_driver.c:2528
#, fuzzy, c-format
msgid "Domain '%s' is still running"
msgstr "區域還在執行中"

#: src/test/test_driver.c:3065
#, fuzzy, c-format
msgid "Network '%s' is still running"
msgstr "區域還在執行中"

#: src/test/test_driver.c:3098
#, fuzzy, c-format
msgid "Network '%s' is already running"
msgstr "區域已經啟動"

#: src/test/test_driver.c:3821 src/test/test_driver.c:3986
#: src/test/test_driver.c:4019 src/test/test_driver.c:4087
#, fuzzy, c-format
msgid "storage pool '%s' is already active"
msgstr "區域已經啟動"

#: src/test/test_driver.c:3907
msgid "storage pool already exists"
msgstr ""

#: src/test/test_driver.c:4048 src/test/test_driver.c:4119
#: src/test/test_driver.c:4271 src/test/test_driver.c:4306
#: src/test/test_driver.c:4352 src/test/test_driver.c:4463
#: src/test/test_driver.c:4544 src/test/test_driver.c:4644
#: src/test/test_driver.c:4722 src/test/test_driver.c:4767
#: src/test/test_driver.c:4807
#, c-format
msgid "storage pool '%s' is not active"
msgstr ""

#: src/test/test_driver.c:4403
#, c-format
msgid "no storage vol with matching key '%s'"
msgstr ""

#: src/test/test_driver.c:4437
#, c-format
msgid "no storage vol with matching path '%s'"
msgstr ""

#: src/test/test_driver.c:4481 src/test/test_driver.c:4570
#, c-format
msgid "Not enough free space in pool for volume '%s'"
msgstr ""

#: src/uml/uml_conf.c:213
msgid "IP address not supported for ethernet inteface"
msgstr ""

#: src/uml/uml_conf.c:218
msgid "script execution not supported for ethernet inteface"
msgstr ""

#: src/uml/uml_conf.c:225
msgid "TCP server networking type not supported"
msgstr ""

#: src/uml/uml_conf.c:230
msgid "TCP client networking type not supported"
msgstr ""

#: src/uml/uml_conf.c:245
#, fuzzy, c-format
msgid "Network '%s' not found"
msgstr "網路名稱或 uuid"

#: src/uml/uml_conf.c:275
msgid "internal networking type not supported"
msgstr ""

#: src/uml/uml_conf.c:280
msgid "direct networking type not supported"
msgstr ""

#: src/uml/uml_conf.c:349
msgid "only TCP listen is supported for chr device"
msgstr ""

#: src/uml/uml_conf.c:367
#, fuzzy, c-format
msgid "failed to open chardev file: %s"
msgstr "無法開啟檔案"

#: src/uml/uml_conf.c:388
#, c-format
msgid "unsupported chr device type %d"
msgstr ""

#: src/uml/uml_driver.c:126 src/util/util.c:506 src/util/util.c:535
msgid "Failed to set close-on-exec file descriptor flag"
msgstr ""

#: src/uml/uml_driver.c:416
msgid "cannot initialize inotify"
msgstr ""

#: src/uml/uml_driver.c:422
#, fuzzy, c-format
msgid "Failed to create monitor directory %s: %s"
msgstr "無法從 %s 建立網路"

#: src/uml/uml_driver.c:454
#, fuzzy
msgid "umlStartup: out of memory"
msgstr "記憶體不足"

#: src/uml/uml_driver.c:599
#, fuzzy, c-format
msgid "failed to read pid: %s"
msgstr "無法執行 %s\n"

#: src/uml/uml_driver.c:621
#, c-format
msgid "Unix path %s too long for destination"
msgstr ""

#: src/uml/uml_driver.c:651
#, fuzzy
msgid "cannot open socket"
msgstr "結點的處理器插槽"

#: src/uml/uml_driver.c:661
msgid "cannot bind socket"
msgstr ""

#: src/uml/uml_driver.c:715
#, c-format
msgid "cannot send too long command %s (%d bytes)"
msgstr ""

#: src/uml/uml_driver.c:721
#, c-format
msgid "Command %s too long for destination"
msgstr ""

#: src/uml/uml_driver.c:728
#, fuzzy, c-format
msgid "cannot send command %s"
msgstr "未知的指令：「%s」"

#: src/uml/uml_driver.c:741
#, c-format
msgid "cannot read reply %s"
msgstr ""

#: src/uml/uml_driver.c:747
#, c-format
msgid "incomplete reply %s"
msgstr ""

#: src/uml/uml_driver.c:785
msgid "Cleanup tap"
msgstr ""

#: src/uml/uml_driver.c:796
#, c-format
msgid "Cleanup '%s'"
msgstr ""

#: src/uml/uml_driver.c:799
#, fuzzy, c-format
msgid "Cleanup failed %d"
msgstr "操作失敗：%s"

#: src/uml/uml_driver.c:803
msgid "Cleanup tap done"
msgstr ""

#: src/uml/uml_driver.c:825
msgid "no kernel specified"
msgstr ""

#: src/uml/uml_driver.c:834
#, c-format
msgid "Cannot find UML kernel %s"
msgstr ""

#: src/uml/uml_driver.c:972
#, c-format
msgid "unexpected UML URI path '%s', try uml:///system"
msgstr ""

#: src/uml/uml_driver.c:979
#, c-format
msgid "unexpected UML URI path '%s', try uml:///session"
msgstr ""

#: src/uml/uml_driver.c:988
msgid "uml state driver is not active"
msgstr ""

#: src/uml/uml_driver.c:1224
#, fuzzy, c-format
msgid "cannot parse version %s"
msgstr "無法連上 %s"

#: src/uml/uml_driver.c:1317
#, fuzzy
msgid "shutdown operation failed"
msgstr "操作失敗"

#: src/uml/uml_driver.c:1429
msgid "cannot set max memory lower than current memory"
msgstr ""

#: src/uml/uml_driver.c:2058 tools/virsh.c:7151
#, c-format
msgid "cannot read %s"
msgstr ""

#: src/util/authhelper.c:41
#, c-format
msgid "Enter username for %s [%s]"
msgstr ""

#: src/util/authhelper.c:46
#, fuzzy, c-format
msgid "Enter username for %s"
msgstr "內部錯誤 %s"

#: src/util/authhelper.c:87
#, c-format
msgid "Enter %s's password for %s"
msgstr ""

#: src/util/bridge.c:431
msgid "Not enabling IFF_VNET_HDR; TUNGETFEATURES ioctl() not implemented"
msgstr ""

#: src/util/bridge.c:437
msgid ""
"Not enabling IFF_VNET_HDR; TUNGETFEATURES ioctl() reports no IFF_VNET_HDR"
msgstr ""

#: src/util/bridge.c:446
msgid "Not enabling IFF_VNET_HDR; TUNGETIFF ioctl() not implemented"
msgstr ""

#: src/util/bridge.c:451
msgid "Enabling IFF_VNET_HDR"
msgstr ""

#: src/util/bridge.c:456
msgid "Not enabling IFF_VNET_HDR; disabled at build time"
msgstr ""

#: src/util/cgroup.c:103
msgid "Unable to open /proc/mounts"
msgstr ""

#: src/util/cgroup.c:155
msgid "Unable to open /proc/self/cgroup"
msgstr ""

#: src/util/cgroup.c:214
#, fuzzy, c-format
msgid "Failed to detect mounts for %s"
msgstr "無法刪除網路 %s"

#: src/util/cgroup.c:236
#, c-format
msgid "Could not find placement for controller %s at %s"
msgstr ""

#: src/util/cgroup.c:249
#, fuzzy, c-format
msgid "Failed to detect mapping for %s"
msgstr "無法從 %s 定義區域"

#: src/util/cgroup.c:454
#, fuzzy, c-format
msgid "Failed to get %s %d"
msgstr "無法暫停區域 %s"

#: src/util/cgroup.c:467
#, fuzzy, c-format
msgid "Failed to set %s %d"
msgstr "無法暫停區域 %s"

#: src/util/cgroup.c:485
#, fuzzy, c-format
msgid "Failed to read %s/%s (%d)"
msgstr "無法讀取插槽 %d\n"

#: src/util/cgroup.c:499
#, fuzzy, c-format
msgid "Failed to set %s/%s (%d)"
msgstr "無法暫停區域 %s"

#: src/util/cgroup.c:664
#, fuzzy, c-format
msgid "Unable to open %s (%d)"
msgstr "無法暫停區域 %s"

#: src/util/cgroup.c:675
#, fuzzy, c-format
msgid "Failed to readdir for %s (%d)"
msgstr "無法讀取插槽 %d\n"

#: src/util/cgroup.c:696
#, c-format
msgid "Unable to remove %s (%d)"
msgstr ""

#: src/util/command.c:782 src/util/command.c:995 src/util/command.c:1157
#: src/util/command.c:1251
#, fuzzy
msgid "invalid use of command API"
msgstr "非作用中區域的名稱"

#: src/util/command.c:816
#, c-format
msgid "exit status %d"
msgstr ""

#: src/util/command.c:818
#, c-format
msgid "fatal signal %d"
msgstr ""

#: src/util/command.c:820
#, fuzzy, c-format
msgid "invalid value %d"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/util/command.c:894
#, fuzzy
msgid "unable to poll on child"
msgstr "無法暫停區域 %s"

#: src/util/command.c:920 src/util/command.c:945
#, fuzzy
msgid "unable to write to child input"
msgstr "無法寫入設定檔"

#: src/util/command.c:1017
msgid "cannot mix caller fds with blocking execution"
msgstr ""

#: src/util/command.c:1023
#, fuzzy
msgid "cannot mix string I/O with daemon"
msgstr "無法寫入設定檔"

#: src/util/command.c:1033
#, fuzzy
msgid "unable to open pipe"
msgstr "無法暫停區域 %s"

#: src/util/command.c:1169
msgid "cannot mix string I/O with asynchronous command"
msgstr ""

#: src/util/command.c:1175
#, fuzzy, c-format
msgid "command is already running as pid %d"
msgstr "區域已經啟動"

#: src/util/command.c:1182
msgid "daemonized command cannot use virCommandRunAsync"
msgstr ""

#: src/util/command.c:1187
#, c-format
msgid "daemonized command cannot set working directory %s"
msgstr ""

#: src/util/command.c:1193
msgid "creation of pid file requires daemonized command"
msgstr ""

#: src/util/command.c:1257
#, fuzzy
msgid "command is not yet running"
msgstr "區域還在執行中"

#: src/util/command.c:1267
#, fuzzy, c-format
msgid "unable to wait for process %d"
msgstr "無法取得區域「%s」"

#: src/util/command.c:1280
#, c-format
msgid "Child process (%s) status unexpected: %s"
msgstr ""

#: src/util/conf.c:355
msgid "unterminated number"
msgstr "未中止的數量"

#: src/util/conf.c:388 src/util/conf.c:412 src/util/conf.c:427
msgid "unterminated string"
msgstr "未中止的字串"

#: src/util/conf.c:458 src/util/conf.c:528
msgid "expecting a value"
msgstr "預期的是數值"

#: src/util/conf.c:469
#, fuzzy
msgid "lists not allowed in VMX format"
msgstr "清單並沒有以 ] 結尾"

#: src/util/conf.c:490
msgid "expecting a separator in list"
msgstr "預期的是清單式的分隔子"

#: src/util/conf.c:513
#, fuzzy
msgid "list is not closed with ]"
msgstr "清單並沒有以 ] 結尾"

#: src/util/conf.c:520
msgid "numbers not allowed in VMX format"
msgstr ""

#: src/util/conf.c:563
msgid "expecting a name"
msgstr "預期的是名稱"

#: src/util/conf.c:627
msgid "expecting a separator"
msgstr "預期的是分隔子"

#: src/util/conf.c:658
msgid "expecting an assignment"
msgstr "預期的是指定子"

#: src/util/conf.c:955
msgid "failed to open file"
msgstr "無法開啟檔案"

#: src/util/conf.c:965
msgid "failed to save content"
msgstr "無法存入內容"

#: src/util/dnsmasq.c:346
#, c-format
msgid "Failed to make dnsmasq (PID: %d) reload config files."
msgstr ""

#: src/util/event_poll.c:327 src/util/event_poll.c:409
#, fuzzy
msgid "Unable to get current time"
msgstr "區域目前的記憶體"

#: src/util/event_poll.c:612
#, fuzzy
msgid "Unable to poll on file handles"
msgstr "無法讀取設定檔 %s"

#: src/util/event_poll.c:666
#, fuzzy
msgid "Unable to setup wakeup pipe"
msgstr "無法讀取插槽 %d\n"

#: src/util/event_poll.c:674
#, fuzzy, c-format
msgid "Unable to add handle %d to event loop"
msgstr "無法為連線雜湊表新增區域"

#: src/util/hash.c:40
msgid "Hash operation not allowed during iteration"
msgstr ""

#: src/util/hooks.c:101
#, c-format
msgid "Invalid hook name for #%d"
msgstr ""

#: src/util/hooks.c:108 src/util/hooks.c:247
#, fuzzy, c-format
msgid "Failed to build path for %s hook"
msgstr "無法為網路 %s 取消定義"

#: src/util/hooks.c:234
#, c-format
msgid "Hook for %s, failed to find operation #%d"
msgstr ""

#: src/util/hostusb.c:80
#, fuzzy, c-format
msgid "Could not parse usb file %s"
msgstr "無法解析設定檔 %s"

#: src/util/hostusb.c:102
#, fuzzy, c-format
msgid "Could not open directory %s"
msgstr "無法連上 %s"

#: src/util/hostusb.c:129
#, fuzzy, c-format
msgid "Failed to parse dir name '%s'"
msgstr "無法繼續區域 %s"

#: src/util/hostusb.c:147
#, c-format
msgid "Did not find USB device %x:%x"
msgstr ""

#: src/util/iohelper.c:99
#, fuzzy, c-format
msgid "Unable to process file with flags %d"
msgstr "無法讀取設定檔 %s"

#: src/util/iohelper.c:115
#, fuzzy, c-format
msgid "Unable to read %s"
msgstr "無法暫停區域 %s"

#: src/util/iohelper.c:123
#, fuzzy, c-format
msgid "Unable to write %s"
msgstr "無法暫停區域 %s"

#: src/util/iohelper.c:133
#, fuzzy, c-format
msgid "Unable to close %s"
msgstr "無法關閉插槽 %d\n"

#: src/util/iohelper.c:165
#, c-format
msgid "%s: syntax FILENAME FLAGS MODE OFFSET LENGTH\n"
msgstr ""

#: src/util/iohelper.c:172
#, c-format
msgid "%s: malformed file flags %s"
msgstr ""

#: src/util/iohelper.c:177
#, c-format
msgid "%s: malformed file mode %s"
msgstr ""

#: src/util/iohelper.c:182
#, fuzzy, c-format
msgid "%s: malformed file offset %s"
msgstr "無法寫入設定檔"

#: src/util/iohelper.c:186
#, c-format
msgid "%s: malformed file length %s"
msgstr ""

#: src/util/iohelper.c:200
#, fuzzy, c-format
msgid "%s: unknown failure with %s\n"
msgstr "未知的主機"

#: src/util/interface.c:112
msgid "ifaceGetFlags is not supported on non-linux platforms"
msgstr ""

#: src/util/interface.c:121
msgid "ifaceIsUp is not supported on non-linux platforms"
msgstr ""

#: src/util/interface.c:235 src/util/interface.c:312
#, fuzzy, c-format
msgid "invalid interface name %s"
msgstr "無效的區域指標，於 %s"

#: src/util/interface.c:244
#, c-format
msgid "coud not get MAC address of interface %s"
msgstr ""

#: src/util/interface.c:323
#, fuzzy, c-format
msgid "interface %s does not exist"
msgstr "「%s」指令不存在"

#: src/util/interface.c:343
msgid "ifaceGetIndex is not supported on non-linux platforms"
msgstr ""

#: src/util/interface.c:388
msgid "ifaceGetVlanID is not supported on non-linux platforms"
msgstr ""

#: src/util/iptables.c:297
msgid "Only IPv4 or IPv6 addresses can be used with iptables"
msgstr ""

#: src/util/iptables.c:303
#, fuzzy
msgid "Failure to mask address"
msgstr "無法取得 hypervisor 類型"

#: src/util/iptables.c:767
#, c-format
msgid "Attempted to NAT '%s'. NAT is only supported for IPv4."
msgstr ""

#: src/util/json.c:914
#, c-format
msgid "cannot parse json %s: %s"
msgstr ""

#: src/util/json.c:1041 src/util/json.c:1047
msgid "No JSON parser implementation is available"
msgstr ""

#: src/util/macvtap.c:129
msgid "cannot allocate nlhandle for netlink"
msgstr ""

#: src/util/macvtap.c:135
#, fuzzy
msgid "cannot connect to netlink socket"
msgstr "無法連上 Xen Store"

#: src/util/macvtap.c:147
msgid "cannot send to netlink socket"
msgstr ""

#: src/util/macvtap.c:161
msgid "error in select call"
msgstr ""

#: src/util/macvtap.c:164
msgid "no valid netlink response was received"
msgstr ""

#: src/util/macvtap.c:172
#, fuzzy
msgid "nl_recv failed"
msgstr "操作失敗"

#: src/util/macvtap.c:279
#, c-format
msgid "error creating %s type of interface"
msgstr ""

#: src/util/macvtap.c:303 src/util/macvtap.c:382 src/util/macvtap.c:825
#: src/util/macvtap.c:1182
msgid "malformed netlink response message"
msgstr ""

#: src/util/macvtap.c:311 src/util/macvtap.c:390 src/util/macvtap.c:833
#: src/util/macvtap.c:1190
#, fuzzy
msgid "allocated netlink buffer is too small"
msgstr "內部錯誤 %s"

#: src/util/macvtap.c:358
#, c-format
msgid "error destroying %s interface"
msgstr ""

#: src/util/macvtap.c:415
msgid "buffer for ifindex path is too small"
msgstr ""

#: src/util/macvtap.c:423
#, c-format
msgid "cannot open macvtap file %s to determine interface index"
msgstr ""

#: src/util/macvtap.c:430
msgid "cannot determine macvtap's tap device interface index"
msgstr ""

#: src/util/macvtap.c:442
msgid "internal buffer for tap device is too small"
msgstr ""

#: src/util/macvtap.c:459
#, c-format
msgid "cannot open macvtap tap device %s"
msgstr ""

#: src/util/macvtap.c:510
msgid "cannot get interface flags on macvtap tap"
msgstr ""

#: src/util/macvtap.c:519
msgid "cannot clean IFF_VNET_HDR flag on macvtap tap"
msgstr ""

#: src/util/macvtap.c:525
msgid "cannot set IFF_VNET_HDR flag on macvtap tap"
msgstr ""

#: src/util/macvtap.c:591
#, c-format
msgid "Interface %s already exists"
msgstr ""

#: src/util/macvtap.c:630
#, c-format
msgid ""
"cannot 'up' interface %s -- another macvtap device may be 'up' and have the "
"same MAC address"
msgstr ""

#: src/util/macvtap.c:724
msgid "error parsing pid of lldpad"
msgstr ""

#: src/util/macvtap.c:729
#, fuzzy, c-format
msgid "Error opening file %s"
msgstr "GET 操作失敗：%s"

#: src/util/macvtap.c:795
#, c-format
msgid "error dumping %s (%d) interface"
msgstr ""

#: src/util/macvtap.c:881
msgid "buffer for root interface name is too small"
msgstr ""

#: src/util/macvtap.c:932
msgid "error parsing IFLA_PORT_SELF part"
msgstr ""

#: src/util/macvtap.c:936
msgid "IFLA_PORT_SELF is missing"
msgstr ""

#: src/util/macvtap.c:948
msgid "error while iterating over IFLA_VF_PORTS part"
msgstr ""

#: src/util/macvtap.c:954
msgid "error parsing IFLA_VF_PORT part"
msgstr ""

#: src/util/macvtap.c:972
msgid "Could not find netlink response with expected parameters"
msgstr ""

#: src/util/macvtap.c:977
msgid "IFLA_VF_PORTS is missing"
msgstr ""

#: src/util/macvtap.c:991
msgid "no IFLA_PORT_RESPONSE found in netlink message"
msgstr ""

#: src/util/macvtap.c:1158
#, fuzzy, c-format
msgid "error during virtual port configuration of ifindex %d"
msgstr "無法解析設定檔 %s"

#: src/util/macvtap.c:1227
msgid "sending of PortProfileRequest failed."
msgstr ""

#: src/util/macvtap.c:1246
#, c-format
msgid "error %d during port-profile setlink on interface %s (%d)"
msgstr ""

#: src/util/macvtap.c:1260
msgid "port-profile setlink timed out"
msgstr ""

#: src/util/macvtap.c:1319 src/util/macvtap.c:1434
msgid "Kernel VF Port support was missing at compile time."
msgstr ""

#: src/util/macvtap.c:1360 src/util/macvtap.c:1500
#, c-format
msgid "operation type %d not supported"
msgstr ""

#: src/util/network.c:83 src/util/network.c:176
msgid "Missing address"
msgstr ""

#: src/util/network.c:92
#, c-format
msgid "Cannot parse socket address '%s': %s"
msgstr ""

#: src/util/network.c:99
#, c-format
msgid "No socket addresses found for '%s'"
msgstr ""

#: src/util/network.c:200
#, c-format
msgid "Cannot convert socket address to string: %s"
msgstr ""

#: src/util/pci.c:613
#, c-format
msgid "Active %s devices on bus with %s, not doing bus reset"
msgstr ""

#: src/util/pci.c:623 src/util/pci.c:1430
#, fuzzy, c-format
msgid "Failed to find parent device for %s"
msgstr "無法從 %s 建立區域"

#: src/util/pci.c:636 src/util/pci.c:682
#, fuzzy, c-format
msgid "Failed to read PCI config space for %s"
msgstr "無法讀取設定檔 %s"

#: src/util/pci.c:656 src/util/pci.c:702
#, fuzzy, c-format
msgid "Failed to restore PCI config space for %s"
msgstr "無法從 %s 回復區域"

#: src/util/pci.c:717
#, fuzzy, c-format
msgid "Failed to open config space file '%s'"
msgstr "無法解析設定檔 %s"

#: src/util/pci.c:742
#, c-format
msgid "Not resetting active device %s"
msgstr ""

#: src/util/pci.c:769
#, fuzzy, c-format
msgid "Unable to reset PCI device %s: %s"
msgstr "無法從 %s 建立區域"

#: src/util/pci.c:771
msgid "no FLR, PM reset or bus reset available"
msgstr ""

#: src/util/pci.c:854
#, fuzzy, c-format
msgid "Failed to add PCI device ID '%s' to %s"
msgstr "無法將區域 %s 存至 %s"

#: src/util/pci.c:867
#, fuzzy, c-format
msgid "Failed to unbind PCI device '%s'"
msgstr "無法從 %s 建立區域"

#: src/util/pci.c:880
#, fuzzy, c-format
msgid "Failed to add slot for PCI device '%s' to %s"
msgstr "無法從 %s 建立區域"

#: src/util/pci.c:888 src/util/pci.c:941
#, fuzzy, c-format
msgid "Failed to bind PCI device '%s' to %s"
msgstr "無法從 %s 建立區域"

#: src/util/pci.c:900
#, fuzzy, c-format
msgid "Failed to remove PCI ID '%s' from %s"
msgstr "無法暫停區域 %s"

#: src/util/pci.c:914 src/util/pci.c:981
msgid "cannot find any PCI stub module"
msgstr ""

#: src/util/pci.c:920
#, c-format
msgid "Not detaching active device %s"
msgstr ""

#: src/util/pci.c:951
#, fuzzy, c-format
msgid "Failed to remove slot for PCI device '%s' to %s"
msgstr "無法將區域 %s 存至 %s"

#: src/util/pci.c:966
#, c-format
msgid "Failed to trigger a re-probe for PCI device '%s'"
msgstr ""

#: src/util/pci.c:987
#, c-format
msgid "Not reattaching active device %s"
msgstr ""

#: src/util/pci.c:1155
#, c-format
msgid "Device %s not found: could not access %s"
msgstr ""

#: src/util/pci.c:1166
#, fuzzy, c-format
msgid "Failed to read product/vendor ID for %s"
msgstr "無法從 %s 建立網路"

#: src/util/pci.c:1242
#, fuzzy, c-format
msgid "Device %s is already in use"
msgstr "區域已經啟動"

#: src/util/pci.c:1485
#, c-format
msgid "Device %s is behind a switch lacking ACS and cannot be assigned"
msgstr ""

#: src/util/processinfo.c:75 src/util/processinfo.c:91
#, c-format
msgid "cannot set CPU affinity on process %d"
msgstr ""

#: src/util/processinfo.c:136 src/util/processinfo.c:150
#, c-format
msgid "cannot get CPU affinity of process %d"
msgstr ""

#: src/util/processinfo.c:170 src/util/processinfo.c:180
msgid "Process CPU affinity is not supported on this platform"
msgstr ""

#: src/util/stats_linux.c:54
msgid "Could not open /proc/net/dev"
msgstr ""

#: src/util/storage_file.c:746
#, fuzzy, c-format
msgid "cannot set to start of '%s'"
msgstr "無法開啟區域 %s"

#: src/util/storage_file.c:751 src/util/storage_file.c:832
#, c-format
msgid "cannot read header '%s'"
msgstr ""

#: src/util/storage_file.c:782 src/util/storage_file.c:877
#, fuzzy, c-format
msgid "cannot open file '%s'"
msgstr "無法開啟檔案"

#: src/util/storage_file.c:827
#, fuzzy, c-format
msgid "cannot seek to start of '%s'"
msgstr "無法開啟區域 %s"

#: src/util/storage_file.c:841
#, c-format
msgid "unknown storage file format %d"
msgstr ""

#: src/util/storage_file.c:929
#, c-format
msgid "Invalid relative path '%s'"
msgstr ""

#: src/util/storage_file.c:947
#, c-format
msgid "cannot determine filesystem for '%s'"
msgstr ""

#: src/util/sysinfo.c:91 src/util/sysinfo.c:100
#, fuzzy
msgid "Host sysinfo extraction not supported on this platform"
msgstr "不支援 hypervisor"

#: src/util/sysinfo.c:116
#, fuzzy, c-format
msgid "Failed to find path for %s binary"
msgstr "無法為網路 %s 取消定義"

#: src/util/sysinfo.c:126
#, fuzzy, c-format
msgid "Failed to execute command %s"
msgstr "無法取得區域「%s」"

#: src/util/sysinfo.c:239
#, fuzzy, c-format
msgid "unexpected sysinfo type model %d"
msgstr "無預期的 dict 節點"

#: src/util/util.c:288
#, fuzzy, c-format
msgid "cannot clear process capabilities %d"
msgstr "無法取得能力方面的資訊"

#: src/util/util.c:336
msgid "cannot block signals"
msgstr ""

#: src/util/util.c:358 src/util/util.c:643
msgid "cannot fork child process"
msgstr ""

#: src/util/util.c:371 src/util/util.c:418
msgid "cannot unblock signals"
msgstr ""

#: src/util/util.c:474
#, fuzzy, c-format
msgid "Cannot find '%s' in path"
msgstr "無法開啟要讀取的 %s"

#: src/util/util.c:493
msgid "cannot create pipe"
msgstr ""

#: src/util/util.c:500 src/util/util.c:529
msgid "Failed to set non-blocking file descriptor flag"
msgstr ""

#: src/util/util.c:522
#, fuzzy
msgid "Failed to create pipe"
msgstr "無法讀取插槽 %d\n"

#: src/util/util.c:594
#, fuzzy
msgid "failed to setup stdin file handle"
msgstr "無法取得 hypervisor 類型"

#: src/util/util.c:600
#, fuzzy
msgid "failed to setup stdout file handle"
msgstr "無法取得節點資訊"

#: src/util/util.c:606
#, fuzzy
msgid "failed to setup stderr file handle"
msgstr "無法開啟檔案"

#: src/util/util.c:630
msgid "cannot become session leader"
msgstr ""

#: src/util/util.c:636
#, fuzzy
msgid "cannot change to root directory"
msgstr "區域目前的記憶體"

#: src/util/util.c:653
#, c-format
msgid "could not write pidfile %s for %d"
msgstr ""

#: src/util/util.c:674
#, fuzzy
msgid "Could not disable SIGPIPE"
msgstr "無法連上 %s"

#: src/util/util.c:685
#, fuzzy
msgid "Could not re-enable SIGPIPE"
msgstr "無法連上 %s"

#: src/util/util.c:705
#, c-format
msgid "cannot execute binary %s"
msgstr ""

#: src/util/util.c:828
#, c-format
msgid "Intermediate daemon process status unexpected: %s"
msgstr ""

#: src/util/util.c:892
#, c-format
msgid "cannot wait for '%s'"
msgstr ""

#: src/util/util.c:902
#, fuzzy, c-format
msgid "'%s' exited unexpectedly: %s"
msgstr "無預期的數值節點"

#: src/util/util.c:939
msgid "virRunWithHook is not implemented for WIN32"
msgstr ""

#: src/util/util.c:954 src/util/util.c:976
msgid "virExec is not implemented for WIN32"
msgstr ""

#: src/util/util.c:994
msgid "virExecDaemonize is not implemented for WIN32"
msgstr ""

#: src/util/util.c:1049
msgid "Unknown poll response."
msgstr ""

#: src/util/util.c:1083
#, fuzzy
msgid "poll error"
msgstr "錯誤"

#: src/util/util.c:1178
#, fuzzy, c-format
msgid "Failed to open file '%s'"
msgstr "無法開啟檔案"

#: src/util/util.c:1185
#, fuzzy, c-format
msgid "Failed to read file '%s'"
msgstr "無法讀取描述檔 %s"

#: src/util/util.c:1386
#, fuzzy, c-format
msgid "failed to create file '%s'"
msgstr "無法取得區域「%s」"

#: src/util/util.c:1426
#, fuzzy, c-format
msgid "failed to create directory '%s'"
msgstr "無法取得網路「%s」"

#: src/util/util.c:1503
#, fuzzy, c-format
msgid "failed to create socket needed for '%s'"
msgstr "無法從 %s 建立區域"

#: src/util/util.c:1557 src/util/util.c:1684
#, fuzzy, c-format
msgid "failed to wait for child creating '%s'"
msgstr "無法取得區域「%s」"

#: src/util/util.c:1588 src/util/util.c:1708
#, c-format
msgid "cannot set gid %u creating '%s'"
msgstr ""

#: src/util/util.c:1595 src/util/util.c:1714
#, c-format
msgid "cannot set uid %u creating '%s'"
msgstr ""

#: src/util/util.c:1604
#, fuzzy, c-format
msgid "child failed to create file '%s'"
msgstr "無法寫入設定檔"

#: src/util/util.c:1722
#, fuzzy, c-format
msgid "child failed to create directory '%s'"
msgstr "無法取得網路「%s」"

#: src/util/util.c:1738
#, c-format
msgid "cannot chown '%s' to group %u"
msgstr ""

#: src/util/util.c:1764
msgid "virFileOpenAs is not implemented for WIN32"
msgstr ""

#: src/util/util.c:1776
msgid "virDirCreate is not implemented for WIN32"
msgstr ""

#: src/util/util.c:2631
#, c-format
msgid "Disk index %d is negative"
msgstr ""

#: src/util/util.c:2687
#, fuzzy
msgid "failed to determine host name"
msgstr "無法取得 hypervisor 類型"

#: src/util/util.c:2713
#, c-format
msgid "getaddrinfo failed for '%s': %s"
msgstr ""

#: src/util/util.c:2844 src/util/util.c:2901 src/util/util.c:2943
#, fuzzy
msgid "sysconf failed"
msgstr "操作失敗"

#: src/util/util.c:2862
#, fuzzy, c-format
msgid "Failed to find user record for uid '%u'"
msgstr "無法從 %s 定義網路"

#: src/util/util.c:2919
#, fuzzy, c-format
msgid "Failed to find user record for name '%s'"
msgstr "無法從 %s 定義網路"

#: src/util/util.c:2961
#, fuzzy, c-format
msgid "Failed to find group record for name '%s'"
msgstr "無法從 %s 定義網路"

#: src/util/util.c:2985
#, c-format
msgid "cannot change to '%d' group"
msgstr ""

#: src/util/util.c:3008
#, c-format
msgid "cannot getpwuid_r(%d)"
msgstr ""

#: src/util/util.c:3015
#, c-format
msgid "cannot initgroups(\"%s\", %d)"
msgstr ""

#: src/util/util.c:3024
#, fuzzy, c-format
msgid "cannot change to uid to '%d'"
msgstr "無法開啟區域 %s"

#: src/util/util.c:3038
msgid "virGetUserDirectory is not available"
msgstr ""

#: src/util/util.c:3047
msgid "virGetUserName is not available"
msgstr ""

#: src/util/util.c:3056
msgid "virGetUserID is not available"
msgstr ""

#: src/util/util.c:3066
msgid "virGetGroupID is not available"
msgstr ""

#: src/util/util.c:3076
msgid "virSetUIDGID is not available"
msgstr ""

#: src/util/virtaudit.c:60
msgid "Unable to initialize audit layer"
msgstr ""

#: src/util/virterror.c:254
msgid "An error occurred, but the cause is unknown"
msgstr ""

#: src/util/virterror.c:591
msgid "warning"
msgstr "警告"

#: src/util/virterror.c:594
msgid "error"
msgstr "錯誤"

#: src/util/virterror.c:726
msgid "No error message provided"
msgstr "無法提供錯誤訊息"

#: src/util/virterror.c:786
#, c-format
msgid "internal error %s"
msgstr "內部錯誤 %s"

#: src/util/virterror.c:788
msgid "internal error"
msgstr "內部錯誤"

#: src/util/virterror.c:791
msgid "out of memory"
msgstr "記憶體不足"

#: src/util/virterror.c:795
#, fuzzy
msgid "this function is not supported by the connection driver"
msgstr "不支援 hypervisor"

#: src/util/virterror.c:797
#, fuzzy, c-format
msgid "this function is not supported by the connection driver: %s"
msgstr "不支援 hypervisor %s"

#: src/util/virterror.c:801
#, fuzzy
msgid "no connection driver available"
msgstr "無效的連線指標，於 "

#: src/util/virterror.c:803
#, fuzzy, c-format
msgid "no connection driver available for %s"
msgstr "區域中沒有可用的主控台\n"

#: src/util/virterror.c:807
msgid "invalid connection pointer in"
msgstr "無效的連線指標，於 "

#: src/util/virterror.c:809
#, c-format
msgid "invalid connection pointer in %s"
msgstr "無效的連線指標，於 %s"

#: src/util/virterror.c:813
msgid "invalid domain pointer in"
msgstr "無效的區域指標，於 "

#: src/util/virterror.c:815
#, c-format
msgid "invalid domain pointer in %s"
msgstr "無效的區域指標，於 %s"

#: src/util/virterror.c:819
msgid "invalid argument in"
msgstr "無效的參數，於 "

#: src/util/virterror.c:821
#, c-format
msgid "invalid argument in %s"
msgstr "無效的參數，於 %s"

#: src/util/virterror.c:825
#, c-format
msgid "operation failed: %s"
msgstr "操作失敗：%s"

#: src/util/virterror.c:827
msgid "operation failed"
msgstr "操作失敗"

#: src/util/virterror.c:831
#, c-format
msgid "GET operation failed: %s"
msgstr "GET 操作失敗：%s"

#: src/util/virterror.c:833
msgid "GET operation failed"
msgstr "GET 操作失敗"

#: src/util/virterror.c:837
#, c-format
msgid "POST operation failed: %s"
msgstr "POST 操作失敗：%s"

#: src/util/virterror.c:839
msgid "POST operation failed"
msgstr "POST 操作失敗"

#: src/util/virterror.c:842
#, c-format
msgid "got unknown HTTP error code %d"
msgstr "收到未知的 HTTP 錯誤碼 %d"

#: src/util/virterror.c:846
#, c-format
msgid "unknown host %s"
msgstr "未知的主機 %s"

#: src/util/virterror.c:848
msgid "unknown host"
msgstr "未知的主機"

#: src/util/virterror.c:852
#, c-format
msgid "failed to serialize S-Expr: %s"
msgstr "無法為 S-Expr 製作序列號：%s"

#: src/util/virterror.c:854
msgid "failed to serialize S-Expr"
msgstr "無法為 S-Expr 製作序列號"

#: src/util/virterror.c:858
msgid "could not use Xen hypervisor entry"
msgstr "無法使用 Xen hypervisor 項目"

#: src/util/virterror.c:860
#, c-format
msgid "could not use Xen hypervisor entry %s"
msgstr "無法使用 Xen hypervisor 項目 %s"

#: src/util/virterror.c:864
msgid "could not connect to Xen Store"
msgstr "無法連上 Xen Store"

#: src/util/virterror.c:866
#, c-format
msgid "could not connect to Xen Store %s"
msgstr "無法連上 Xen Store %s"

#: src/util/virterror.c:869
#, fuzzy, c-format
msgid "failed Xen syscall %s"
msgstr "Xen syscall %s %d 失敗"

#: src/util/virterror.c:873
msgid "unknown OS type"
msgstr "未知的作業系統類型"

#: src/util/virterror.c:875
#, c-format
msgid "unknown OS type %s"
msgstr "未知的作業系統類型 %s"

#: src/util/virterror.c:878
msgid "missing kernel information"
msgstr "找不到核心資訊"

#: src/util/virterror.c:882
msgid "missing root device information"
msgstr "找不到 root 裝置的資訊"

#: src/util/virterror.c:884
#, c-format
msgid "missing root device information in %s"
msgstr "找不到 root 裝置的資訊，於 %s"

#: src/util/virterror.c:888
msgid "missing source information for device"
msgstr "找不到裝置的來源資訊"

#: src/util/virterror.c:890
#, c-format
msgid "missing source information for device %s"
msgstr "找不到裝置 %s 的來源資訊"

#: src/util/virterror.c:894
msgid "missing target information for device"
msgstr "找不到裝置的目標資訊"

#: src/util/virterror.c:896
#, c-format
msgid "missing target information for device %s"
msgstr "找不到 %s 裝置的目標資訊"

#: src/util/virterror.c:900
msgid "missing domain name information"
msgstr "找不到區域名稱的資訊"

#: src/util/virterror.c:902
#, c-format
msgid "missing domain name information in %s"
msgstr "找不到區域名稱的資訊，於 %s"

#: src/util/virterror.c:906
msgid "missing operating system information"
msgstr "找不到作業系統資訊"

#: src/util/virterror.c:908
#, c-format
msgid "missing operating system information for %s"
msgstr "找不到 %s 的作業系統資訊"

#: src/util/virterror.c:912
msgid "missing devices information"
msgstr "找不到裝置的資訊"

#: src/util/virterror.c:914
#, c-format
msgid "missing devices information for %s"
msgstr "找不到 %s 的裝置資訊"

#: src/util/virterror.c:918
msgid "too many drivers registered"
msgstr "註冊太多驅動程式"

#: src/util/virterror.c:920
#, c-format
msgid "too many drivers registered in %s"
msgstr "在 %s 中註冊太多驅動程式"

#: src/util/virterror.c:924
msgid "library call failed, possibly not supported"
msgstr "呼叫函式庫失敗，可能並不支援"

#: src/util/virterror.c:926
#, c-format
msgid "library call %s failed, possibly not supported"
msgstr "呼叫函式庫 %s 失敗，可能並不支援"

#: src/util/virterror.c:930
msgid "XML description not well formed or invalid"
msgstr "XML 的描述格式有誤"

#: src/util/virterror.c:932
#, c-format
msgid "XML description for %s is not well formed or invalid"
msgstr "%s 的 XML 描述之格式有誤"

#: src/util/virterror.c:936
msgid "this domain exists already"
msgstr "這個區域已經存在"

#: src/util/virterror.c:938
#, c-format
msgid "domain %s exists already"
msgstr "區域 %s 已經存在"

#: src/util/virterror.c:942
msgid "operation forbidden for read only access"
msgstr "唯讀時，禁止這操作"

#: src/util/virterror.c:944
#, c-format
msgid "operation %s forbidden for read only access"
msgstr "唯讀時，禁止 %s 操作"

#: src/util/virterror.c:948
msgid "failed to open configuration file for reading"
msgstr "無法開啟要讀取的設定檔"

#: src/util/virterror.c:950
#, c-format
msgid "failed to open %s for reading"
msgstr "無法開啟要讀取的 %s"

#: src/util/virterror.c:954
msgid "failed to read configuration file"
msgstr "無法讀取設定檔"

#: src/util/virterror.c:956
#, c-format
msgid "failed to read configuration file %s"
msgstr "無法讀取設定檔 %s"

#: src/util/virterror.c:960
msgid "failed to parse configuration file"
msgstr "無法解析設定檔"

#: src/util/virterror.c:962
#, c-format
msgid "failed to parse configuration file %s"
msgstr "無法解析設定檔 %s"

#: src/util/virterror.c:966
msgid "configuration file syntax error"
msgstr "設定檔語法錯誤"

#: src/util/virterror.c:968
#, c-format
msgid "configuration file syntax error: %s"
msgstr "設定檔語法錯誤：%s"

#: src/util/virterror.c:972
msgid "failed to write configuration file"
msgstr "無法寫入設定檔"

#: src/util/virterror.c:974
#, c-format
msgid "failed to write configuration file: %s"
msgstr "無法寫入設定檔：%s"

#: src/util/virterror.c:978
msgid "parser error"
msgstr "解析程式錯誤"

#: src/util/virterror.c:984
msgid "invalid network pointer in"
msgstr "無效的網路指標，於 "

#: src/util/virterror.c:986
#, c-format
msgid "invalid network pointer in %s"
msgstr "無效的網路指標，於 %s"

#: src/util/virterror.c:990
msgid "this network exists already"
msgstr "這個網路已經存在"

#: src/util/virterror.c:992
#, c-format
msgid "network %s exists already"
msgstr "網路 %s 已經存在"

#: src/util/virterror.c:996
msgid "system call error"
msgstr "系統呼叫錯誤"

#: src/util/virterror.c:1002
#, fuzzy
msgid "RPC error"
msgstr "錯誤"

#: src/util/virterror.c:1008
#, fuzzy
msgid "GNUTLS call error"
msgstr "系統呼叫錯誤"

#: src/util/virterror.c:1014
#, fuzzy
msgid "Failed to find the network"
msgstr "無法為網路 %s 取消定義"

#: src/util/virterror.c:1016
#, fuzzy, c-format
msgid "Failed to find the network: %s"
msgstr "無法為網路 %s 取消定義"

#: src/util/virterror.c:1020
#, fuzzy
msgid "Domain not found"
msgstr "區域資訊"

#: src/util/virterror.c:1022
#, fuzzy, c-format
msgid "Domain not found: %s"
msgstr "從 %s 回復區域\n"

#: src/util/virterror.c:1026
#, fuzzy
msgid "Network not found"
msgstr "網路名稱或 uuid"

#: src/util/virterror.c:1028
#, fuzzy, c-format
msgid "Network not found: %s"
msgstr "網路 %s 建立自 %s\n"

#: src/util/virterror.c:1032
#, fuzzy
msgid "invalid MAC address"
msgstr "無效的參數，於 %s"

#: src/util/virterror.c:1034
#, fuzzy, c-format
msgid "invalid MAC address: %s"
msgstr "無效的參數，於 %s"

#: src/util/virterror.c:1038
#, fuzzy
msgid "authentication failed"
msgstr "操作失敗"

#: src/util/virterror.c:1040
#, fuzzy, c-format
msgid "authentication failed: %s"
msgstr "操作失敗：%s"

#: src/util/virterror.c:1044
#, fuzzy
msgid "Storage pool not found"
msgstr "網路名稱或 uuid"

#: src/util/virterror.c:1046
#, fuzzy, c-format
msgid "Storage pool not found: %s"
msgstr "網路 %s 建立自 %s\n"

#: src/util/virterror.c:1050
#, fuzzy
msgid "Storage volume not found"
msgstr "網路名稱或 uuid"

#: src/util/virterror.c:1052
#, fuzzy, c-format
msgid "Storage volume not found: %s"
msgstr "網路 %s 建立自 %s\n"

#: src/util/virterror.c:1056
#, fuzzy
msgid "invalid storage pool pointer in"
msgstr "無效的網路指標，於 "

#: src/util/virterror.c:1058
#, fuzzy, c-format
msgid "invalid storage pool pointer in %s"
msgstr "無效的網路指標，於 %s"

#: src/util/virterror.c:1062
#, fuzzy
msgid "invalid storage volume pointer in"
msgstr "無效的網路指標，於 "

#: src/util/virterror.c:1064
#, fuzzy, c-format
msgid "invalid storage volume pointer in %s"
msgstr "無效的網路指標，於 %s"

#: src/util/virterror.c:1068
#, fuzzy
msgid "Failed to find a storage driver"
msgstr "無法為網路 %s 取消定義"

#: src/util/virterror.c:1070
#, fuzzy, c-format
msgid "Failed to find a storage driver: %s"
msgstr "無法為網路 %s 取消定義"

#: src/util/virterror.c:1074
#, fuzzy
msgid "Failed to find a node driver"
msgstr "無法為網路 %s 取消定義"

#: src/util/virterror.c:1076
#, fuzzy, c-format
msgid "Failed to find a node driver: %s"
msgstr "無法為網路 %s 取消定義"

#: src/util/virterror.c:1080
#, fuzzy
msgid "invalid node device pointer"
msgstr "無效的區域指標，於 "

#: src/util/virterror.c:1082
#, fuzzy, c-format
msgid "invalid node device pointer in %s"
msgstr "無效的區域指標，於 %s"

#: src/util/virterror.c:1086
#, fuzzy
msgid "Node device not found"
msgstr "區域資訊"

#: src/util/virterror.c:1088
#, fuzzy, c-format
msgid "Node device not found: %s"
msgstr "從 %s 回復區域\n"

#: src/util/virterror.c:1092
#, fuzzy
msgid "Security model not found"
msgstr "網路名稱或 uuid"

#: src/util/virterror.c:1094
#, fuzzy, c-format
msgid "Security model not found: %s"
msgstr "網路 %s 建立自 %s\n"

#: src/util/virterror.c:1098
msgid "Requested operation is not valid"
msgstr ""

#: src/util/virterror.c:1100
#, fuzzy, c-format
msgid "Requested operation is not valid: %s"
msgstr "操作失敗：%s"

#: src/util/virterror.c:1104
#, fuzzy
msgid "Failed to find the interface"
msgstr "無法為網路 %s 取消定義"

#: src/util/virterror.c:1106
#, fuzzy, c-format
msgid "Failed to find the interface: %s"
msgstr "無法為網路 %s 取消定義"

#: src/util/virterror.c:1110
#, fuzzy
msgid "Interface not found"
msgstr "網路名稱或 uuid"

#: src/util/virterror.c:1112
#, fuzzy, c-format
msgid "Interface not found: %s"
msgstr "網路 %s 建立自 %s\n"

#: src/util/virterror.c:1116
#, fuzzy
msgid "invalid interface pointer in"
msgstr "無效的網路指標，於 "

#: src/util/virterror.c:1118
#, fuzzy, c-format
msgid "invalid interface pointer in %s"
msgstr "無效的網路指標，於 %s"

#: src/util/virterror.c:1122
msgid "multiple matching interfaces found"
msgstr ""

#: src/util/virterror.c:1124
#, c-format
msgid "multiple matching interfaces found: %s"
msgstr ""

#: src/util/virterror.c:1128
#, fuzzy
msgid "Failed to find a secret storage driver"
msgstr "無法為網路 %s 取消定義"

#: src/util/virterror.c:1130
#, fuzzy, c-format
msgid "Failed to find a secret storage driver: %s"
msgstr "無法為網路 %s 取消定義"

#: src/util/virterror.c:1134
#, fuzzy
msgid "Invalid secret"
msgstr "無效的參數，於 "

#: src/util/virterror.c:1136
#, fuzzy, c-format
msgid "Invalid secret: %s"
msgstr "無效的參數，於 %s"

#: src/util/virterror.c:1140
#, fuzzy
msgid "Secret not found"
msgstr "網路名稱或 uuid"

#: src/util/virterror.c:1142
#, fuzzy, c-format
msgid "Secret not found: %s"
msgstr "網路 %s 建立自 %s\n"

#: src/util/virterror.c:1146
#, fuzzy
msgid "Failed to start the nwfilter driver"
msgstr "無法開啟網路 %s"

#: src/util/virterror.c:1148
#, fuzzy, c-format
msgid "Failed to start the nwfilter driver: %s"
msgstr "無法開啟網路 %s"

#: src/util/virterror.c:1152
#, fuzzy
msgid "Invalid network filter"
msgstr "無效的網路指標，於 "

#: src/util/virterror.c:1154
#, fuzzy, c-format
msgid "Invalid network filter: %s"
msgstr "無效的網路指標，於 %s"

#: src/util/virterror.c:1158
#, fuzzy
msgid "Network filter not found"
msgstr "網路名稱或 uuid"

#: src/util/virterror.c:1160
#, fuzzy, c-format
msgid "Network filter not found: %s"
msgstr "網路 %s 建立自 %s\n"

#: src/util/virterror.c:1164
msgid "Error while building firewall"
msgstr ""

#: src/util/virterror.c:1166
#, c-format
msgid "Error while building firewall: %s"
msgstr ""

#: src/util/virterror.c:1170
#, fuzzy
msgid "unsupported configuration"
msgstr "分配設定"

#: src/util/virterror.c:1172
#, fuzzy, c-format
msgid "unsupported configuration: %s"
msgstr "無法寫入設定檔：%s"

#: src/util/virterror.c:1176
#, fuzzy
msgid "Timed out during operation"
msgstr "無法取得節點資訊"

#: src/util/virterror.c:1178
#, c-format
msgid "Timed out during operation: %s"
msgstr ""

#: src/util/virterror.c:1182
#, fuzzy
msgid "Failed to make domain persistent after migration"
msgstr "無法解析 Xend 的區域資訊"

#: src/util/virterror.c:1184
#, fuzzy, c-format
msgid "Failed to make domain persistent after migration: %s"
msgstr "無法將區域 %s 存至 %s"

#: src/util/virterror.c:1188
#, fuzzy
msgid "Hook script execution failed"
msgstr "操作失敗"

#: src/util/virterror.c:1190
#, fuzzy, c-format
msgid "Hook script execution failed: %s"
msgstr "操作失敗：%s"

#: src/util/virterror.c:1194
msgid "Invalid snapshot"
msgstr ""

#: src/util/virterror.c:1196
#, fuzzy, c-format
msgid "Invalid snapshot: %s"
msgstr "無效的參數，於 %s"

#: src/util/virterror.c:1200
#, fuzzy
msgid "Domain snapshot not found"
msgstr "區域資訊"

#: src/util/virterror.c:1202
#, fuzzy, c-format
msgid "Domain snapshot not found: %s"
msgstr "從 %s 回復區域\n"

#: src/util/virterror.c:1206
#, fuzzy
msgid "invalid stream pointer"
msgstr "無效的網路指標，於 "

#: src/util/virterror.c:1208
#, fuzzy, c-format
msgid "invalid stream pointer in %s"
msgstr "無效的網路指標，於 %s"

#: src/util/xml.c:68
msgid "Invalid parameter to virXPathString()"
msgstr ""

#: src/util/xml.c:108
#, c-format
msgid "'%s' value longer than %zd bytes"
msgstr ""

#: src/util/xml.c:138
msgid "Invalid parameter to virXPathNumber()"
msgstr ""

#: src/util/xml.c:167
msgid "Invalid parameter to virXPathLong()"
msgstr ""

#: src/util/xml.c:280 src/util/xml.c:404
msgid "Invalid parameter to virXPathULong()"
msgstr ""

#: src/util/xml.c:458
msgid "Invalid parameter to virXPathLongLong()"
msgstr ""

#: src/util/xml.c:515
msgid "Invalid parameter to virXPathBoolean()"
msgstr ""

#: src/util/xml.c:552
msgid "Invalid parameter to virXPathNode()"
msgstr ""

#: src/util/xml.c:592
msgid "Invalid parameter to virXPathNodeSet()"
msgstr ""

#: src/vbox/vbox_MSCOMGlue.c:369 src/vbox/vbox_MSCOMGlue.c:392
#, fuzzy, c-format
msgid "Could not query registry value '%s\\Version'"
msgstr "無法連上 hypervisor"

#: src/vbox/vbox_MSCOMGlue.c:374
#, c-format
msgid "Registry value '%s\\Version' has unexpected type"
msgstr ""

#: src/vbox/vbox_MSCOMGlue.c:379
#, c-format
msgid "Registry value '%s\\Version' is too short"
msgstr ""

#: src/vbox/vbox_MSCOMGlue.c:512 src/vbox/vbox_MSCOMGlue.c:520
#, fuzzy, c-format
msgid "Could not parse IID from '%s', rc = 0x%08x"
msgstr "無法連上 %s"

#: src/vbox/vbox_MSCOMGlue.c:529
#, fuzzy, c-format
msgid "Could not create VirtualBox instance, rc = 0x%08x"
msgstr "無法解開執行中 %s hypervisor 的版本\n"

#: src/vbox/vbox_MSCOMGlue.c:538
#, fuzzy, c-format
msgid "Could not create Session instance, rc = 0x%08x"
msgstr "無法連上 %s"

#: src/vbox/vbox_XPCOMCGlue.c:100
#, fuzzy, c-format
msgid "Libaray '%s' doesn't exist"
msgstr "「%s」指令不存在"

#: src/vbox/vbox_XPCOMCGlue.c:145
#, fuzzy, c-format
msgid "Could not dlsym %s from '%s': %s"
msgstr "無法連上 %s"

#: src/vbox/vbox_XPCOMCGlue.c:153
#, fuzzy, c-format
msgid "Calling %s from '%s' failed"
msgstr "將區域狀態存至檔案"

#: src/vbox/vbox_driver.c:156 src/vbox/vbox_tmpl.c:981
msgid "no VirtualBox driver path specified (try vbox:///session)"
msgstr ""

#: src/vbox/vbox_driver.c:163 src/vbox/vbox_tmpl.c:988
#, c-format
msgid "unknown driver path '%s' specified (try vbox:///session)"
msgstr ""

#: src/vbox/vbox_driver.c:170 src/vbox/vbox_tmpl.c:995
#, c-format
msgid "unknown driver path '%s' specified (try vbox:///system)"
msgstr ""

#: src/vbox/vbox_driver.c:176
msgid "unable to initialize VirtualBox driver API"
msgstr ""

#: src/vbox/vbox_tmpl.c:888
msgid "nsIEventQueue object is null"
msgstr ""

#: src/vbox/vbox_tmpl.c:897
msgid "IVirtualBox object is null"
msgstr ""

#: src/vbox/vbox_tmpl.c:903
msgid "ISession object is null"
msgstr ""

#: src/vbox/vbox_tmpl.c:936
#, fuzzy
msgid "Cound not extract VirtualBox version"
msgstr "無法解開執行中 %s hypervisor 的版本\n"

#: src/vbox/vbox_tmpl.c:1107
#, c-format
msgid "Could not get list of Domains, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:1144
#, c-format
msgid "Could not get number of Domains, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:1216 src/vbox/vbox_tmpl.c:1276
#: src/vbox/vbox_tmpl.c:1346 src/vbox/vbox_tmpl.c:1420
#: src/vbox/vbox_tmpl.c:1819 src/vbox/vbox_tmpl.c:3502
#, c-format
msgid "Could not get list of machines, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:1516
#, fuzzy
msgid "error while suspending the domain"
msgstr "暫停區域"

#: src/vbox/vbox_tmpl.c:1522
msgid "machine not in running state to suspend it"
msgstr ""

#: src/vbox/vbox_tmpl.c:1568
msgid "error while resuming the domain"
msgstr ""

#: src/vbox/vbox_tmpl.c:1574
msgid "machine not paused, so can't resume it"
msgstr ""

#: src/vbox/vbox_tmpl.c:1611
msgid "machine paused, so can't power it down"
msgstr ""

#: src/vbox/vbox_tmpl.c:1615 src/vbox/vbox_tmpl.c:1707
msgid "machine already powered down"
msgstr ""

#: src/vbox/vbox_tmpl.c:1670
msgid "machine not running, so can't reboot it"
msgstr ""

#: src/vbox/vbox_tmpl.c:1777
msgid "memory size can't be changed unless domain is powered down"
msgstr ""

#: src/vbox/vbox_tmpl.c:1793 src/vbox/vbox_tmpl.c:4779
#, c-format
msgid "could not set the memory size of the domain to: %lu Kb, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:2008
#, c-format
msgid "could not set the number of cpus of the domain to: %u, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:2019
#, c-format
msgid "can't open session to the domain with id %d"
msgstr ""

#: src/vbox/vbox_tmpl.c:2657
#, c-format
msgid ""
"Could not generate medium name for the disk at: controller instance:%u, port:"
"%d, slot:%d"
msgstr ""

#: src/vbox/vbox_tmpl.c:3228
#, c-format
msgid "Could not get list of Defined Domains, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:3278
#, c-format
msgid "Could not get number of Defined Domains, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:3448
msgid "OpenRemoteSession/LaunchVMProcess failed, domain can't be started"
msgstr ""

#: src/vbox/vbox_tmpl.c:3495
#, fuzzy
msgid "Error while reading the domain name"
msgstr "解析區域的檔名"

#: src/vbox/vbox_tmpl.c:3532
msgid "machine is not in poweroff|saved|aborted state, so couldn't start it"
msgstr ""

#: src/vbox/vbox_tmpl.c:3665 src/vbox/vbox_tmpl.c:5119
#, c-format
msgid "can't get the uuid of the file to be attached to cdrom: %s, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:3672 src/vbox/vbox_tmpl.c:5128
#, c-format
msgid "could not attach the file to cdrom: %s, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:3729
#, c-format
msgid "can't get the uuid of the file to be attached as harddisk: %s, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:3775
#, c-format
msgid "could not attach the file as harddisk: %s, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:3821 src/vbox/vbox_tmpl.c:5172
#, c-format
msgid ""
"can't get the uuid of the file to be attached to floppy drive: %s, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:3829 src/vbox/vbox_tmpl.c:5179
#, c-format
msgid "could not attach the file to floppy drive: %s, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:3998
#, c-format
msgid ""
"Failed to attach the following disk/dvd/floppy to the machine: %s, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:4008
#, c-format
msgid ""
"can't get the uuid of the file to be attached as harddisk/dvd/floppy: %s, rc="
"%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:4049
#, c-format
msgid ""
"can't get the port/slot number of harddisk/dvd/floppy to be attached: %s, rc="
"%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:4072
#, c-format
msgid "could not attach the file as harddisk/dvd/floppy: %s, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:4771 src/vbox/vbox_tmpl.c:4839
#, fuzzy, c-format
msgid "could not define a domain, rc=%08x"
msgstr "無法從 %s 定義區域"

#: src/vbox/vbox_tmpl.c:4791
#, fuzzy, c-format
msgid "could not set the number of virtual CPUs to: %u, rc=%08x"
msgstr "改變虛擬處理器的數量"

#: src/vbox/vbox_tmpl.c:4809
#, fuzzy, c-format
msgid "could not change PAE status to: %s, rc=%08x"
msgstr "無法連上 %s"

#: src/vbox/vbox_tmpl.c:4811 src/vbox/vbox_tmpl.c:4822
#: src/vbox/vbox_tmpl.c:4830
msgid "Enabled"
msgstr ""

#: src/vbox/vbox_tmpl.c:4811 src/vbox/vbox_tmpl.c:4822
#: src/vbox/vbox_tmpl.c:4830
msgid "Disabled"
msgstr ""

#: src/vbox/vbox_tmpl.c:4820
#, c-format
msgid "could not change ACPI status to: %s, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:4828
#, c-format
msgid "could not change APIC status to: %s, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:5030
#, c-format
msgid "could not delete the domain, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:5312
#, c-format
msgid "could not de-attach the mounted ISO, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:5333
#, c-format
msgid "could not attach the file to floppy drive, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:5399 src/vbox/vbox_tmpl.c:5770
#, c-format
msgid "could not get snapshot count for domain %s"
msgstr ""

#: src/vbox/vbox_tmpl.c:5419
#, c-format
msgid "could not get root snapshot for domain %s"
msgstr ""

#: src/vbox/vbox_tmpl.c:5432
#, c-format
msgid "unexpected number of snapshots < %u"
msgstr ""

#: src/vbox/vbox_tmpl.c:5440 src/vbox/vbox_tmpl.c:6228
msgid "could not get children snapshots"
msgstr ""

#: src/vbox/vbox_tmpl.c:5449
#, c-format
msgid "unexpected number of snapshots > %u"
msgstr ""

#: src/vbox/vbox_tmpl.c:5495 src/vbox/vbox_tmpl.c:5820
#, fuzzy
msgid "could not get snapshot name"
msgstr "無法取得 hypervisor 類型"

#: src/vbox/vbox_tmpl.c:5510
#, c-format
msgid "domain %s has no snapshots with name %s"
msgstr ""

#: src/vbox/vbox_tmpl.c:5557 src/vbox/vbox_tmpl.c:5659
#: src/vbox/vbox_tmpl.c:5763 src/vbox/vbox_tmpl.c:5803
#: src/vbox/vbox_tmpl.c:5866 src/vbox/vbox_tmpl.c:5898
#: src/vbox/vbox_tmpl.c:5938 src/vbox/vbox_tmpl.c:6106
#: src/vbox/vbox_tmpl.c:6263
#, fuzzy
msgid "no domain with matching UUID"
msgstr "將區域名稱或 ID 轉為 UUID"

#: src/vbox/vbox_tmpl.c:5564 src/vbox/vbox_tmpl.c:6033
#: src/vbox/vbox_tmpl.c:6133 src/vbox/vbox_tmpl.c:6274
#, fuzzy
msgid "could not get domain state"
msgstr "無法取得區域「%s」"

#: src/vbox/vbox_tmpl.c:5579 src/vbox/vbox_tmpl.c:6049
#: src/vbox/vbox_tmpl.c:6290
#, c-format
msgid "could not open VirtualBox session with domain %s"
msgstr ""

#: src/vbox/vbox_tmpl.c:5601 src/vbox/vbox_tmpl.c:5609
#, fuzzy, c-format
msgid "could not take snapshot of domain %s"
msgstr "無法刪除區域 %s"

#: src/vbox/vbox_tmpl.c:5616 src/vbox/vbox_tmpl.c:6125
#, c-format
msgid "could not get current snapshot of domain %s"
msgstr ""

#: src/vbox/vbox_tmpl.c:5673
#, fuzzy, c-format
msgid "could not get description of snapshot %s"
msgstr "無法讀取描述檔 %s"

#: src/vbox/vbox_tmpl.c:5689
#, c-format
msgid "could not get creation time of snapshot %s"
msgstr ""

#: src/vbox/vbox_tmpl.c:5699
#, fuzzy, c-format
msgid "could not get parent of snapshot %s"
msgstr "無法連上 %s"

#: src/vbox/vbox_tmpl.c:5707
#, c-format
msgid "could not get name of parent of snapshot %s"
msgstr ""

#: src/vbox/vbox_tmpl.c:5722 src/vbox/vbox_tmpl.c:6117
#, fuzzy, c-format
msgid "could not get online state of snapshot %s"
msgstr "無法連上 %s"

#: src/vbox/vbox_tmpl.c:5905 src/vbox/vbox_tmpl.c:5945
#, fuzzy
msgid "could not get current snapshot"
msgstr "無法連上 %s"

#: src/vbox/vbox_tmpl.c:5951
#, fuzzy
msgid "domain has no snapshots"
msgstr "區域 ID 或名稱"

#: src/vbox/vbox_tmpl.c:5958
msgid "could not get current snapshot name"
msgstr ""

#: src/vbox/vbox_tmpl.c:5992 src/vbox/vbox_tmpl.c:6179
#, fuzzy
msgid "could not get snapshot UUID"
msgstr "無法取得網路 UUID"

#: src/vbox/vbox_tmpl.c:5999 src/vbox/vbox_tmpl.c:6061
#: src/vbox/vbox_tmpl.c:6071
#, fuzzy, c-format
msgid "could not restore snapshot for domain %s"
msgstr "無法從 %s 回復區域"

#: src/vbox/vbox_tmpl.c:6026
#, fuzzy
msgid "could not get domain UUID"
msgstr "無法取得區域 UUID"

#: src/vbox/vbox_tmpl.c:6040
#, fuzzy, c-format
msgid "domain %s is already running"
msgstr "區域已經啟動"

#: src/vbox/vbox_tmpl.c:6058
#, fuzzy
msgid "cannot restore domain snapshot for running domain"
msgstr "傳回執行中區域的狀態"

#: src/vbox/vbox_tmpl.c:6140
#, fuzzy
msgid "cannot revert snapshot of running domain"
msgstr "儲存執行中的區域。"

#: src/vbox/vbox_tmpl.c:6191
#, fuzzy
msgid "cannot delete domain snapshot for running domain"
msgstr "傳回執行中區域的狀態"

#: src/vbox/vbox_tmpl.c:6194 src/vbox/vbox_tmpl.c:6203
msgid "could not delete snapshot"
msgstr ""

#: src/vbox/vbox_tmpl.c:6281
#, fuzzy
msgid "cannot delete snapshots of running domain"
msgstr "傳回執行中區域的狀態"

#: src/vbox/vbox_tmpl.c:7777
#, c-format
msgid "could not get number of volumes in the pool: %s, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:7829
#, c-format
msgid "could not get the volume list in the pool: %s, rc=%08x"
msgstr ""

#: src/vbox/vbox_tmpl.c:7911 src/vbox/vbox_tmpl.c:8136
#: src/vbox/vbox_tmpl.c:8305 src/vbox/vbox_tmpl.c:8372
#: src/vbox/vbox_tmpl.c:8479
#, fuzzy, c-format
msgid "Could not parse UUID from '%s'"
msgstr "無法連上 %s"

#: src/vmware/vmware_conf.c:246
#, fuzzy, c-format
msgid "failed to parse %s version"
msgstr "無法開啟檔案"

#: src/vmware/vmware_conf.c:252
#, fuzzy
msgid "version parsing error"
msgstr "解析程式錯誤"

#: src/vmware/vmware_conf.c:297
#, c-format
msgid "path '%s' doesn't reference a file"
msgstr ""

#: src/vmware/vmware_conf.c:413
#, fuzzy, c-format
msgid "file %s does not exist"
msgstr "「%s」指令不存在"

#: src/vmware/vmware_conf.c:425
#, fuzzy, c-format
msgid "failed to move file to %s "
msgstr "無法開啟檔案"

#: src/vmware/vmware_conf.c:466
#, fuzzy
msgid "unable to read vmware log file"
msgstr "無法開啟檔案"

#: src/vmware/vmware_conf.c:472
msgid "cannot find pid in vmware log file"
msgstr ""

#: src/vmware/vmware_conf.c:480
#, fuzzy
msgid "cannot parse pid in vmware log file"
msgstr "無法寫入設定檔"

#: src/vmware/vmware_driver.c:97
#, c-format
msgid ""
"unexpected VMware URI path '%s', try vmwareplayer:///session or vmwarews:///"
"session"
msgstr ""

#: src/vmware/vmware_driver.c:110
#, c-format
msgid "%s utility is missing"
msgstr ""

#: src/vmware/vmware_driver.c:272 src/vmware/vmware_driver.c:525
#, fuzzy, c-format
msgid "Failed to write vmx file '%s'"
msgstr "無法讀取描述檔 %s"

#: src/vmware/vmware_driver.c:361
msgid ""
"vmplayer does not support libvirt suspend/resume (vmware pause/unpause) "
"operation "
msgstr ""

#: src/vmware/vmware_driver.c:410
msgid ""
"vmplayer does not support libvirt suspend/resume(vmware pause/unpause) "
"operation "
msgstr ""

#: src/vmware/vmware_driver.c:429
#, fuzzy
msgid "domain is not in suspend state"
msgstr "區域還在執行中"

#: src/vmx/vmx.c:585
#, c-format
msgid "libxml2 doesn't handle %s encoding"
msgstr ""

#: src/vmx/vmx.c:594
#, c-format
msgid "Could not convert from %s to UTF-8 encoding"
msgstr ""

#: src/vmx/vmx.c:626 src/vmx/vmx.c:642 src/vmx/vmx.c:671 src/vmx/vmx.c:687
#: src/vmx/vmx.c:717 src/vmx/vmx.c:728 src/vmx/vmx.c:766 src/vmx/vmx.c:777
#, c-format
msgid "Missing essential config entry '%s'"
msgstr ""

#: src/vmx/vmx.c:632 src/vmx/vmx.c:678 src/vmx/vmx.c:743 src/vmx/vmx.c:794
#, c-format
msgid "Config entry '%s' must be a string"
msgstr ""

#: src/vmx/vmx.c:737
#, c-format
msgid "Config entry '%s' must represent an integer value"
msgstr ""

#: src/vmx/vmx.c:788
#, c-format
msgid "Config entry '%s' must represent a boolean value (true|false)"
msgstr ""

#: src/vmx/vmx.c:810
msgid ""
"Expecting domain XML attribute 'dev' of entry 'devices/disk/target' to start "
"with 'sd'"
msgstr ""

#: src/vmx/vmx.c:819 src/vmx/vmx.c:859 src/vmx/vmx.c:894
#, c-format
msgid "Could not parse valid disk index from '%s'"
msgstr ""

#: src/vmx/vmx.c:826
#, c-format
msgid "SCSI disk index (parsed from '%s') is too large"
msgstr ""

#: src/vmx/vmx.c:850
msgid ""
"Expecting domain XML attribute 'dev' of entry 'devices/disk/target' to start "
"with 'hd'"
msgstr ""

#: src/vmx/vmx.c:866
#, c-format
msgid "IDE disk index (parsed from '%s') is too large"
msgstr ""

#: src/vmx/vmx.c:885
msgid ""
"Expecting domain XML attribute 'dev' of entry 'devices/disk/target' to start "
"with 'fd'"
msgstr ""

#: src/vmx/vmx.c:901
#, c-format
msgid "Floppy disk index (parsed from '%s') is too large"
msgstr ""

#: src/vmx/vmx.c:922
#, c-format
msgid "Unsupported disk address type '%s'"
msgstr ""

#: src/vmx/vmx.c:934
msgid "Could not verify disk address"
msgstr ""

#: src/vmx/vmx.c:942
#, c-format
msgid "Disk address %d:%d:%d doesn't match target device '%s'"
msgstr ""

#: src/vmx/vmx.c:951 src/vmx/vmx.c:1614 src/vmx/vmx.c:1805 src/vmx/vmx.c:1924
#, c-format
msgid "SCSI controller index %d out of [0..3] range"
msgstr ""

#: src/vmx/vmx.c:958
#, c-format
msgid "SCSI bus index %d out of [0] range"
msgstr ""

#: src/vmx/vmx.c:965 src/vmx/vmx.c:1931
#, c-format
msgid "SCSI unit index %d out of [0..6,8..15] range"
msgstr ""

#: src/vmx/vmx.c:972
#, c-format
msgid "IDE controller index %d out of [0] range"
msgstr ""

#: src/vmx/vmx.c:979 src/vmx/vmx.c:1951
#, c-format
msgid "IDE bus index %d out of [0..1] range"
msgstr ""

#: src/vmx/vmx.c:986 src/vmx/vmx.c:1958
#, c-format
msgid "IDE unit index %d out of [0..1] range"
msgstr ""

#: src/vmx/vmx.c:993 src/vmx/vmx.c:1983
#, c-format
msgid "FDC controller index %d out of [0] range"
msgstr ""

#: src/vmx/vmx.c:1000
#, c-format
msgid "FDC bus index %d out of [0] range"
msgstr ""

#: src/vmx/vmx.c:1007 src/vmx/vmx.c:1990
#, c-format
msgid "FDC unit index %d out of [0..1] range"
msgstr ""

#: src/vmx/vmx.c:1013
#, c-format
msgid "Unsupported bus type '%s'"
msgstr ""

#: src/vmx/vmx.c:1045
#, c-format
msgid "Unknown driver name '%s'"
msgstr ""

#: src/vmx/vmx.c:1058
#, c-format
msgid "Missing SCSI controller for index %d"
msgstr ""

#: src/vmx/vmx.c:1067
#, c-format
msgid ""
"Inconsistent SCSI controller model ('%s' is not '%s') for SCSI controller "
"index %d"
msgstr ""

#: src/vmx/vmx.c:1147
#, c-format
msgid ""
"Disks on SCSI controller %d have inconsistent controller models, cannot "
"autodetect model"
msgstr ""

#: src/vmx/vmx.c:1163
#, c-format
msgid ""
"Expecting domain XML attribute 'model' of entry 'controller' to be "
"'buslogic' or 'lsilogic' or 'lsisas1068' or 'vmpvscsi' but found '%s'"
msgstr ""

#: src/vmx/vmx.c:1214
msgid "virVMXContext has no parseFileName function set"
msgstr ""

#: src/vmx/vmx.c:1267
#, c-format
msgid "Expecting VMX entry 'config.version' to be 8 but found %lld"
msgstr ""

#: src/vmx/vmx.c:1280
#, c-format
msgid "Expecting VMX entry 'virtualHW.version' to be 4 or 7 but found %lld"
msgstr ""

#: src/vmx/vmx.c:1301
msgid "VMX entry 'name' contains invalid escape sequence"
msgstr ""

#: src/vmx/vmx.c:1315
msgid "VMX entry 'annotation' contains invalid escape sequence"
msgstr ""

#: src/vmx/vmx.c:1328
#, c-format
msgid ""
"Expecting VMX entry 'memsize' to be an unsigned integer (multiple of 4) but "
"found %lld"
msgstr ""

#: src/vmx/vmx.c:1374
#, c-format
msgid ""
"Expecting VMX entry 'numvcpus' to be an unsigned integer (1 or a multiple of "
"2) but found %lld"
msgstr ""

#: src/vmx/vmx.c:1406 src/vmx/vmx.c:1434
#, c-format
msgid ""
"Expecting VMX entry 'sched.cpu.affinity' to be a comma separated list of "
"unsigned integers but found '%s'"
msgstr ""

#: src/vmx/vmx.c:1414
#, c-format
msgid "VMX entry 'sched.cpu.affinity' contains a %d, this value is too large"
msgstr ""

#: src/vmx/vmx.c:1445
#, c-format
msgid ""
"Expecting VMX entry 'sched.cpu.affinity' to contain at least as many values "
"as 'numvcpus' (%lld) but found only %d value(s)"
msgstr ""

#: src/vmx/vmx.c:1605
#, fuzzy
msgid "Could not add controllers"
msgstr "無法連上 %s"

#: src/vmx/vmx.c:1842
#, c-format
msgid ""
"Expecting VMX entry '%s' to be 'buslogic' or 'lsilogic' or 'lsisas1068' or "
"'pvscsi' but found '%s'"
msgstr ""

#: src/vmx/vmx.c:1974 src/vmx/vmx.c:2007
#, c-format
msgid "Unsupported bus type '%s' for device type '%s'"
msgstr ""

#: src/vmx/vmx.c:2014 src/vmx/vmx.c:2189
#, c-format
msgid "Unsupported device type '%s'"
msgstr ""

#: src/vmx/vmx.c:2086
#, c-format
msgid "Expecting VMX entry '%s' to be 'scsi-hardDisk' or 'disk' but found '%s'"
msgstr ""

#: src/vmx/vmx.c:2094
#, c-format
msgid "Expecting VMX entry '%s' to be 'ata-hardDisk' or 'disk' but found '%s'"
msgstr ""

#: src/vmx/vmx.c:2120 src/vmx/vmx.c:2156 src/vmx/vmx.c:2184
#, c-format
msgid "Invalid or not yet handled value '%s' for VMX entry '%s'"
msgstr ""

#: src/vmx/vmx.c:2129
#, c-format
msgid "Expecting VMX entry '%s' to be 'cdrom-image' but found '%s'"
msgstr ""

#: src/vmx/vmx.c:2165
#, c-format
msgid "Expecting VMX entry '%s' to be 'file' but found '%s'"
msgstr ""

#: src/vmx/vmx.c:2196
#, c-format
msgid "Could not assign address to disk '%s'"
msgstr ""

#: src/vmx/vmx.c:2269 src/vmx/vmx.c:3444
#, c-format
msgid "Ethernet controller index %d out of [0..3] range"
msgstr ""

#: src/vmx/vmx.c:2328 src/vmx/vmx.c:2338
#, c-format
msgid "Expecting VMX entry '%s' to be MAC address but found '%s'"
msgstr ""

#: src/vmx/vmx.c:2345
#, c-format
msgid ""
"Expecting VMX entry '%s' to be 'generated' or 'static' or 'vpx' but found "
"'%s'"
msgstr ""

#: src/vmx/vmx.c:2362
#, c-format
msgid ""
"Expecting VMX entry '%s' to be 'vlance' or 'vmxnet' or 'vmxnet3' or 'e1000' "
"but found '%s'"
msgstr ""

#: src/vmx/vmx.c:2406 src/vmx/vmx.c:2412
#, c-format
msgid "No yet handled value '%s' for VMX entry '%s'"
msgstr ""

#: src/vmx/vmx.c:2426
#, fuzzy, c-format
msgid "Invalid value '%s' for VMX entry '%s'"
msgstr "記憶體大小 %d 不是有效的數值"

#: src/vmx/vmx.c:2490 src/vmx/vmx.c:3546
#, c-format
msgid "Serial port index %d out of [0..3] range"
msgstr ""

#: src/vmx/vmx.c:2580
#, c-format
msgid "VMX entry '%s' doesn't contain a port part"
msgstr ""

#: src/vmx/vmx.c:2617
#, c-format
msgid "VMX entry '%s' contains unsupported scheme '%s'"
msgstr ""

#: src/vmx/vmx.c:2628
#, c-format
msgid "Expecting VMX entry '%s' to be 'server' or 'client' but found '%s'"
msgstr ""

#: src/vmx/vmx.c:2634
#, c-format
msgid ""
"Expecting VMX entry '%s' to be 'device', 'file' or 'pipe' or 'network' but "
"found '%s'"
msgstr ""

#: src/vmx/vmx.c:2691 src/vmx/vmx.c:3652
#, c-format
msgid "Parallel port index %d out of [0..2] range"
msgstr ""

#: src/vmx/vmx.c:2753
#, c-format
msgid "Expecting VMX entry '%s' to be 'device' or 'file' but found '%s'"
msgstr ""

#: src/vmx/vmx.c:2844
msgid "virVMXContext has no formatFileName function set"
msgstr ""

#: src/vmx/vmx.c:2852
#, c-format
msgid "Expecting virt type to be '%s' but found '%s'"
msgstr ""

#: src/vmx/vmx.c:2875
#, c-format
msgid ""
"Expecting domain XML attribute 'arch' of entry 'os/type' to be 'i686' or "
"'x86_64' but found '%s'"
msgstr ""

#: src/vmx/vmx.c:2888
#, fuzzy, c-format
msgid "Unsupported SMBIOS mode '%s'"
msgstr "無預期的資料「%s」"

#: src/vmx/vmx.c:2952
msgid "No support for domain XML entry 'vcpu' attribute 'current'"
msgstr ""

#: src/vmx/vmx.c:2958
#, c-format
msgid ""
"Expecting domain XML entry 'vcpu' to be an unsigned integer (1 or a multiple "
"of 2) but found %d"
msgstr ""

#: src/vmx/vmx.c:2980
#, c-format
msgid ""
"Expecting domain XML attribute 'cpuset' of entry 'vcpu' to contain at least "
"%d CPU(s)"
msgstr ""

#: src/vmx/vmx.c:3013
#, c-format
msgid "Unsupported graphics type '%s'"
msgstr ""

#: src/vmx/vmx.c:3070
#, c-format
msgid "Unsupported disk device type '%s'"
msgstr ""

#: src/vmx/vmx.c:3103
#, fuzzy
msgid "No support for multiple video devices"
msgstr "找不到裝置的目標資訊"

#: src/vmx/vmx.c:3229
#, c-format
msgid "Unsupported bus type '%s' for harddisk"
msgstr ""

#: src/vmx/vmx.c:3236
#, c-format
msgid "%s harddisk '%s' has unsupported type '%s', expecting '%s'"
msgstr ""

#: src/vmx/vmx.c:3250
#, c-format
msgid ""
"Image file for %s harddisk '%s' has unsupported suffix, expecting '.vmdk'"
msgstr ""

#: src/vmx/vmx.c:3273
#, c-format
msgid "%s harddisk '%s' has unsupported cache mode '%s'"
msgstr ""

#: src/vmx/vmx.c:3317
#, c-format
msgid "Unsupported bus type '%s' for cdrom"
msgstr ""

#: src/vmx/vmx.c:3332
#, c-format
msgid "Image file for %s cdrom '%s' has unsupported suffix, expecting '.iso'"
msgstr ""

#: src/vmx/vmx.c:3358
#, c-format
msgid "%s cdrom '%s' has unsupported type '%s', expecting '%s' or '%s'"
msgstr ""

#: src/vmx/vmx.c:3397
#, c-format
msgid "Image file for floppy '%s' has unsupported suffix, expecting '.flp'"
msgstr ""

#: src/vmx/vmx.c:3422
#, c-format
msgid "Floppy '%s' has unsupported type '%s', expecting '%s' or '%s'"
msgstr ""

#: src/vmx/vmx.c:3459
#, c-format
msgid ""
"Expecting domain XML entry 'devices/interfase/model' to be 'vlance' or "
"'vmxnet' or 'vmxnet2' or 'vmxnet3' or 'e1000' but found '%s'"
msgstr ""

#: src/vmx/vmx.c:3495
#, c-format
msgid "Unsupported net type '%s'"
msgstr ""

#: src/vmx/vmx.c:3611
#, c-format
msgid "Unsupported character device TCP protocol '%s'"
msgstr ""

#: src/vmx/vmx.c:3629 src/vmx/vmx.c:3687
#, c-format
msgid "Unsupported character device type '%s'"
msgstr ""

#: src/vmx/vmx.c:3704
#, fuzzy, c-format
msgid "Unsupported video device type '%s'"
msgstr "無預期的 mime 類型"

#: src/vmx/vmx.c:3717
msgid "Multi-head video devices are unsupported"
msgstr ""

#: src/xen/xen_driver.c:306
#, c-format
msgid "unexpected Xen URI path '%s', try ///var/lib/xen/xend-socket"
msgstr ""

#: src/xen/xen_driver.c:1380
msgid "failed to get XML representation of migrated domain"
msgstr ""

#: src/xen/xen_driver.c:1387
#, fuzzy
msgid "failed to define domain on destination host"
msgstr "無法從 %s 定義區域"

#: src/xen/xen_hypervisor.c:1421
#, c-format
msgid "Credit scheduler weight parameter (%d) is out of range (1-65535)"
msgstr ""

#: src/xen/xen_hypervisor.c:1430
#, c-format
msgid "Credit scheduler cap parameter (%d) is out of range (0-65534)"
msgstr ""

#: src/xen/xen_hypervisor.c:2425
msgid "could not read CPU flags"
msgstr ""

#: src/xen/xen_hypervisor.c:2706 src/xen/xen_hypervisor.c:2717
#, c-format
msgid "cannot read file %s"
msgstr ""

#: src/xen/xen_hypervisor.c:2883 src/xen/xen_hypervisor.c:3531
#, fuzzy
msgid "domain shut off or invalid"
msgstr "區域 id 或 uuid"

#: src/xen/xen_hypervisor.c:2891
msgid "unsupported in dom interface < 4"
msgstr ""

#: src/xen/xen_hypervisor.c:2899 src/xen/xen_hypervisor.c:2905
#: src/xen/xen_hypervisor.c:3546
#, fuzzy
msgid "cannot get domain details"
msgstr "節點的區域清單"

#: src/xen/xen_hypervisor.c:3563 src/xen/xen_hypervisor.c:3571
msgid "cannot get VCPUs info"
msgstr ""

#: src/xen/xen_inotify.c:132 src/xen/xen_inotify.c:208
#, fuzzy, c-format
msgid "parsing uuid %s"
msgstr "區域的 uuid"

#: src/xen/xen_inotify.c:157
msgid "finding dom on config list"
msgstr ""

#: src/xen/xen_inotify.c:244
#, fuzzy
msgid "Error looking up domain"
msgstr "分配區域"

#: src/xen/xen_inotify.c:251 src/xen/xen_inotify.c:344
#: src/xen/xen_inotify.c:351
msgid "Error adding file to config cache"
msgstr ""

#: src/xen/xen_inotify.c:297
msgid "conn, or private data is NULL"
msgstr ""

#: src/xen/xen_inotify.c:340 src/xen/xen_inotify.c:363
msgid "looking up dom"
msgstr ""

#: src/xen/xen_inotify.c:408
#, c-format
msgid "cannot open directory: %s"
msgstr ""

#: src/xen/xen_inotify.c:426
msgid "Error adding file to config list"
msgstr ""

#: src/xen/xen_inotify.c:436
msgid "initializing inotify"
msgstr ""

#: src/xen/xen_inotify.c:447
#, c-format
msgid "adding watch on %s"
msgstr ""

#: src/xen/xend_internal.c:95
#, fuzzy
msgid "failed to create a socket"
msgstr "無法分配節點"

#: src/xen/xend_internal.c:115
#, fuzzy
msgid "failed to connect to xend"
msgstr "無法連上 Xen Store"

#: src/xen/xend_internal.c:162
msgid "failed to read from Xen Daemon"
msgstr "無法從 Xen 系統程式讀取"

#: src/xen/xend_internal.c:165
#, fuzzy
msgid "failed to write to Xen Daemon"
msgstr "無法從 Xen 系統程式讀取"

#: src/xen/xend_internal.c:301
#, c-format
msgid "Xend returned HTTP Content-Length of %d, which exceeds maximum of %d"
msgstr ""

#: src/xen/xend_internal.c:359
#, c-format
msgid "%d status from xen daemon: %s:%s"
msgstr ""

#: src/xen/xend_internal.c:407 src/xen/xend_internal.c:410
#: src/xen/xend_internal.c:419
#, c-format
msgid "xend_post: error from xen daemon: %s"
msgstr ""

#: src/xen/xend_internal.c:751
#, fuzzy, c-format
msgid "unable to connect to '%s:%s'"
msgstr "無法連上 %s"

#: src/xen/xend_internal.c:866
msgid "failed to urlencode the create S-Expr"
msgstr "無法 urlencode 以建立 S-Expr"

#: src/xen/xend_internal.c:907
msgid "domain information incomplete, missing domid"
msgstr "區域的資訊不全，沒有 domid"

#: src/xen/xend_internal.c:913
msgid "domain information incorrect domid not numeric"
msgstr "區域的資訊不正確，domid 並非數字型態"

#: src/xen/xend_internal.c:918 src/xen/xend_internal.c:970
msgid "domain information incomplete, missing uuid"
msgstr "區域的資訊不全，沒有 uuid"

#: src/xen/xend_internal.c:957 src/xenxs/xen_sxpr.c:1063
#: src/xenxs/xen_sxpr.c:1070
msgid "domain information incomplete, missing name"
msgstr "區域的資訊不全，沒有名稱"

#: src/xen/xend_internal.c:1213
#, fuzzy
msgid "topology syntax error"
msgstr "設定檔語法錯誤"

#: src/xen/xend_internal.c:1276
msgid "failed to parse Xend domain information"
msgstr "無法解析 Xend 的區域資訊"

#: src/xen/xend_internal.c:1400 src/xen/xend_internal.c:1426
#: src/xen/xend_internal.c:1453 src/xen/xend_internal.c:1481
#: src/xen/xend_internal.c:1511 src/xen/xend_internal.c:1587
#: src/xen/xend_internal.c:1623
#, fuzzy, c-format
msgid "Domain %s isn't running."
msgstr "區域還在執行中"

#: src/xen/xend_internal.c:1783
msgid "xenDaemonDomainFetch failed to find this domain"
msgstr ""

#: src/xen/xend_internal.c:2179 src/xen/xend_internal.c:2625
#: src/xen/xend_internal.c:2635 src/xen/xend_internal.c:2795
#: src/xen/xend_internal.c:2805 src/xen/xend_internal.c:2907
#: src/xen/xend_internal.c:2917
msgid "Xend version does not support modifying persistent config"
msgstr ""

#: src/xen/xend_internal.c:2186
#, fuzzy
msgid "domain not running"
msgstr "區域還在執行中"

#: src/xen/xend_internal.c:2193 src/xen/xend_internal.c:2646
#: src/xen/xend_internal.c:2816 src/xen/xend_internal.c:2928
msgid "Xend only supports modifying both live and persistent config"
msgstr ""

#: src/xen/xend_internal.c:2203 src/xen/xm_internal.c:713
msgid "could not determin max vcpus for the domain"
msgstr ""

#: src/xen/xend_internal.c:2282
#, fuzzy
msgid "failed to add vcpupin xml entry"
msgstr "無法存入內容"

#: src/xen/xend_internal.c:2619 src/xen/xend_internal.c:2789
#: src/xen/xend_internal.c:2901
msgid "Cannot modify live config if domain is inactive"
msgstr ""

#: src/xen/xend_internal.c:2715 src/xen/xend_internal.c:2722
#: src/xen/xend_internal.c:2845 src/xen/xend_internal.c:2954
#, fuzzy
msgid "unsupported device type"
msgstr "無預期的 mime 類型"

#: src/xen/xend_internal.c:2735
#, fuzzy, c-format
msgid "target '%s' already exists"
msgstr "區域已經啟動"

#: src/xen/xend_internal.c:2853
msgid "requested device does not exist"
msgstr ""

#: src/xen/xend_internal.c:2998
msgid "xenDaemonGetAutostart failed to find this domain"
msgstr ""

#: src/xen/xend_internal.c:3037
msgid "xenDaemonSetAutostart failed to find this domain"
msgstr ""

#: src/xen/xend_internal.c:3047
#, fuzzy
msgid "unexpected value from on_xend_start"
msgstr "無預期的數值節點"

#: src/xen/xend_internal.c:3062
#, fuzzy
msgid "sexpr2string failed"
msgstr "操作失敗"

#: src/xen/xend_internal.c:3067
#, fuzzy
msgid "Failed to redefine sexpr"
msgstr "無法為網路 %s 取消定義"

#: src/xen/xend_internal.c:3072
msgid "on_xend_start not present in sexpr"
msgstr ""

#: src/xen/xend_internal.c:3129
msgid ""
"xenDaemonDomainMigrate: Xen does not support renaming domains during "
"migration"
msgstr ""

#: src/xen/xend_internal.c:3139
msgid ""
"xenDaemonDomainMigrate: Xen does not support bandwidth limits during "
"migration"
msgstr ""

#: src/xen/xend_internal.c:3167
msgid "xenDaemonDomainMigrate: xend cannot migrate paused domains"
msgstr ""

#: src/xen/xend_internal.c:3175
msgid "xenDaemonDomainMigrate: unsupported flag"
msgstr ""

#: src/xen/xend_internal.c:3188
msgid "xenDaemonDomainMigrate: invalid URI"
msgstr ""

#: src/xen/xend_internal.c:3193
msgid "xenDaemonDomainMigrate: only xenmigr:// migrations are supported by Xen"
msgstr ""

#: src/xen/xend_internal.c:3200
msgid "xenDaemonDomainMigrate: a hostname must be specified in the URI"
msgstr ""

#: src/xen/xend_internal.c:3220
msgid "xenDaemonDomainMigrate: invalid port number"
msgstr ""

#: src/xen/xend_internal.c:3285
#, fuzzy
msgid "failed to parse domain description"
msgstr "無法解析 Xend 的區域資訊"

#: src/xen/xend_internal.c:3291
#, fuzzy
msgid "failed to build sexpr"
msgstr "無法為 S-Expr 製作序列號"

#: src/xen/xend_internal.c:3299
#, fuzzy, c-format
msgid "Failed to create inactive domain %s"
msgstr "無法建立非運作中的區域 %s\n"

#: src/xen/xend_internal.c:3476 src/xen/xend_internal.c:3551
#: src/xen/xend_internal.c:3647
msgid "unsupported in xendConfigVersion < 4"
msgstr ""

#: src/xen/xend_internal.c:3488
#, fuzzy
msgid "node information incomplete, missing scheduler name"
msgstr "區域的資訊不全，沒有名稱"

#: src/xen/xend_internal.c:3506 src/xen/xend_internal.c:3606
#: src/xen/xend_internal.c:3717
msgid "Unknown scheduler"
msgstr ""

#: src/xen/xend_internal.c:3564 src/xen/xend_internal.c:3660
#, fuzzy
msgid "Failed to get a scheduler name"
msgstr "無法取得 hypervisor 類型"

#: src/xen/xend_internal.c:3577 src/xen/xend_internal.c:3696
#, fuzzy
msgid "domain information incomplete, missing cpu_weight"
msgstr "區域的資訊不全，沒有 uuid"

#: src/xen/xend_internal.c:3582 src/xen/xend_internal.c:3705
#, fuzzy
msgid "domain information incomplete, missing cpu_cap"
msgstr "區域的資訊不全，沒有 uuid"

#: src/xen/xend_internal.c:3588
#, c-format
msgid "Weight %s too big for destination"
msgstr ""

#: src/xen/xend_internal.c:3597
#, c-format
msgid "Cap %s too big for destination"
msgstr ""

#: src/xen/xend_internal.c:3766
msgid "domainBlockPeek is not supported for dom0"
msgstr ""

#: src/xen/xend_internal.c:3794
#, c-format
msgid "%s: invalid path"
msgstr ""

#: src/xen/xend_internal.c:3802
#, fuzzy, c-format
msgid "failed to open for reading: %s"
msgstr "無法開啟要讀取的 %s"

#: src/xen/xend_internal.c:3814
#, fuzzy, c-format
msgid "failed to lseek or read from file: %s"
msgstr "無法讀取設定檔 %s"

#: src/xen/xend_internal.c:3968
msgid "hotplug of device type not supported"
msgstr ""

#: src/xen/xm_internal.c:244
#, fuzzy, c-format
msgid "cannot stat: %s"
msgstr "無狀態"

#: src/xen/xm_internal.c:302
msgid "xenXMConfigCacheRefresh: virHashAddEntry"
msgstr ""

#: src/xen/xm_internal.c:354
#, c-format
msgid "cannot read directory %s"
msgstr ""

#: src/xen/xm_internal.c:826
#, fuzzy
msgid "read only connection"
msgstr "唯讀的連線"

#: src/xen/xm_internal.c:831
#, fuzzy
msgid "not inactive domain"
msgstr "列出非作用中的區域"

#: src/xen/xm_internal.c:839
msgid "virHashLookup"
msgstr ""

#: src/xen/xm_internal.c:844
msgid "can't retrieve config file for domain"
msgstr ""

#: src/xen/xm_internal.c:1106
msgid "can't retrieve config filename for domain to overwrite"
msgstr ""

#: src/xen/xm_internal.c:1112
msgid "can't retrieve config entry for domain to overwrite"
msgstr ""

#: src/xen/xm_internal.c:1119 src/xen/xm_internal.c:1126
#, fuzzy
msgid "failed to remove old domain from config map"
msgstr "無法從 %s 回復區域"

#: src/xen/xm_internal.c:1135
msgid "config file name is too long"
msgstr ""

#: src/xen/xm_internal.c:1153
#, fuzzy
msgid "unable to get current time"
msgstr "區域目前的記憶體"

#: src/xen/xm_internal.c:1162 src/xen/xm_internal.c:1169
#, fuzzy
msgid "unable to store config file handle"
msgstr "無法讀取設定檔 %s"

#: src/xen/xm_internal.c:1367 src/xen/xm_internal.c:1463
msgid "Xm driver only supports modifying persistent config"
msgstr ""

#: src/xen/xm_internal.c:1409
msgid "Xm driver only supports adding disk or network devices"
msgstr ""

#: src/xen/xm_internal.c:1521
#, fuzzy
msgid "unknown device"
msgstr "未知的作業系統類型"

#: src/xen/xm_internal.c:1581
#, c-format
msgid "cannot check link %s points to config %s"
msgstr ""

#: src/xen/xm_internal.c:1610
#, fuzzy, c-format
msgid "failed to create link %s to %s"
msgstr "無法將區域 %s 存至 %s"

#: src/xen/xm_internal.c:1618
#, fuzzy, c-format
msgid "failed to remove link %s"
msgstr "無法繼續區域 %s"

#: src/xen/xs_internal.c:287
msgid "failed to connect to Xen Store"
msgstr "無法連上 Xen Store"

#: src/xen/xs_internal.c:311
msgid "adding watch @releaseDomain"
msgstr ""

#: src/xen/xs_internal.c:320
msgid "adding watch @introduceDomain"
msgstr ""

#: src/xen/xs_internal.c:1132
msgid "watch already tracked"
msgstr ""

#: src/xenapi/xenapi_driver.c:104
msgid "Server name not in URI"
msgstr ""

#: src/xenapi/xenapi_driver.c:110
msgid "Authentication Credentials not found"
msgstr ""

#: src/xenapi/xenapi_driver.c:154
#, fuzzy
msgid "Capabilities not found"
msgstr "能力"

#: src/xenapi/xenapi_driver.c:288
#, fuzzy
msgid "Couldn't parse version info"
msgstr "無法連上 %s"

#: src/xenapi/xenapi_driver.c:296
msgid "Couldn't get version info"
msgstr ""

#: src/xenapi/xenapi_driver.c:365
#, fuzzy
msgid "Unable to get host metric Information"
msgstr "無法取得節點資訊"

#: src/xenapi/xenapi_driver.c:387
#, fuzzy
msgid "Unable to get Host CPU set"
msgstr "無法取得 hypervisor 類型"

#: src/xenapi/xenapi_driver.c:408
msgid "Capabilities not available"
msgstr ""

#: src/xenapi/xenapi_driver.c:438
msgid "DomainID can't fit in 32 bits"
msgstr ""

#: src/xenapi/xenapi_driver.c:512
#, fuzzy
msgid "Domain Pointer is invalid"
msgstr "無效的區域指標，於 "

#: src/xenapi/xenapi_driver.c:565 src/xenapi/xenapi_driver.c:607
#, fuzzy
msgid "Domain Pointer not valid"
msgstr "區域名稱或 uuid"

#: src/xenapi/xenapi_driver.c:642 src/xenapi/xenapi_driver.c:689
#: src/xenapi/xenapi_driver.c:724 src/xenapi/xenapi_driver.c:759
#: src/xenapi/xenapi_driver.c:794 src/xenapi/xenapi_driver.c:828
#: src/xenapi/xenapi_driver.c:865 src/xenapi/xenapi_driver.c:900
#: src/xenapi/xenapi_driver.c:931 src/xenapi/xenapi_driver.c:968
#: src/xenapi/xenapi_driver.c:1019 src/xenapi/xenapi_driver.c:1063
#: src/xenapi/xenapi_driver.c:1132 src/xenapi/xenapi_driver.c:1191
#: src/xenapi/xenapi_driver.c:1241 src/xenapi/xenapi_driver.c:1517
#: src/xenapi/xenapi_driver.c:1609 src/xenapi/xenapi_driver.c:1645
#: src/xenapi/xenapi_driver.c:1691
#, fuzzy
msgid "Domain name is not unique"
msgstr "區域名稱、id 或 uuid"

#: src/xenapi/xenapi_driver.c:663
msgid "Couldn't get the Domain Pointer"
msgstr ""

#: src/xenapi/xenapi_driver.c:1114
#, fuzzy
msgid "Couldn't fetch Domain Information"
msgstr "區域資訊"

#: src/xenapi/xenapi_driver.c:1121
#, fuzzy
msgid "Couldn't fetch Node Information"
msgstr "無法取得節點資訊"

#: src/xenapi/xenapi_driver.c:1399
msgid "Unable to parse given mac address"
msgstr ""

#: src/xenapi/xenapi_driver.c:1451
msgid "Couldn't get VM record"
msgstr ""

#: src/xenapi/xenapi_driver.c:1576
#, fuzzy
msgid "Couldn't get VM information from XML"
msgstr "XML 格式的網路資訊"

#: src/xenapi/xenapi_driver.c:1740
#, fuzzy
msgid "Couldn't get host metrics - memory information"
msgstr "無法取得節點資訊"

#: src/xenapi/xenapi_driver.c:1746
msgid "Couldn't get host metrics"
msgstr ""

#: src/xenapi/xenapi_utils.c:122
msgid "Query parameter 'no_verify' has unexpected value (should be 0 or 1)"
msgstr ""

#: src/xenapi/xenapi_utils.c:388 src/xenapi/xenapi_utils.c:392
#, c-format
msgid "%s"
msgstr ""

#: src/xenxs/xen_sxpr.c:60 src/xenxs/xen_sxpr.c:1050
msgid "domain information incomplete, missing id"
msgstr "區域的資訊不全，沒有 id"

#: src/xenxs/xen_sxpr.c:98
#, fuzzy
msgid "domain information incomplete, missing HVM loader"
msgstr "區域的資訊不全，沒有名稱"

#: src/xenxs/xen_sxpr.c:152
#, fuzzy
msgid "domain information incomplete, missing kernel & bootloader"
msgstr "區域的資訊不全，沒有核心"

#: src/xenxs/xen_sxpr.c:195
#, fuzzy, c-format
msgid "unknown chr device type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/xenxs/xen_sxpr.c:222 src/xenxs/xen_sxpr.c:252 src/xenxs/xen_sxpr.c:270
msgid "malformed char device string"
msgstr ""

#: src/xenxs/xen_sxpr.c:368
msgid "domain information incomplete, vbd has no dev"
msgstr "區域的資訊不全，vbd 沒有 dev"

#: src/xenxs/xen_sxpr.c:379
msgid "domain information incomplete, vbd has no src"
msgstr "區域的資訊不全，vbd 沒有 src"

#: src/xenxs/xen_sxpr.c:388
msgid "cannot parse vbd filename, missing driver name"
msgstr "無法解析 vbd 檔名，找不到驅動程式名稱"

#: src/xenxs/xen_sxpr.c:397 src/xenxs/xen_xm.c:453
#, c-format
msgid "Driver name %s too big for destination"
msgstr ""

#: src/xenxs/xen_sxpr.c:409
msgid "cannot parse vbd filename, missing driver type"
msgstr "無法解析 vbd 檔名，找不到驅動程式類型"

#: src/xenxs/xen_sxpr.c:418 src/xenxs/xen_xm.c:474
#, c-format
msgid "Driver type %s too big for destination"
msgstr ""

#: src/xenxs/xen_sxpr.c:563 src/xenxs/xen_xm.c:656
#, c-format
msgid "malformed mac address '%s'"
msgstr ""

#: src/xenxs/xen_sxpr.c:641
#, c-format
msgid "Sound model %s too big for destination"
msgstr ""

#: src/xenxs/xen_sxpr.c:830
#, fuzzy, c-format
msgid "unknown graphics type '%s'"
msgstr "未知的作業系統類型 %s"

#: src/xenxs/xen_sxpr.c:953
#, fuzzy
msgid "missing PCI domain"
msgstr "暫停區域"

#: src/xenxs/xen_sxpr.c:958
#, fuzzy
msgid "missing PCI bus"
msgstr "找不到 \""

#: src/xenxs/xen_sxpr.c:963
#, fuzzy
msgid "missing PCI slot"
msgstr "找不到 \""

#: src/xenxs/xen_sxpr.c:968
#, fuzzy
msgid "missing PCI func"
msgstr "找不到 \""

#: src/xenxs/xen_sxpr.c:974
#, fuzzy, c-format
msgid "cannot parse PCI domain '%s'"
msgstr "無法取得區域「%s」"

#: src/xenxs/xen_sxpr.c:979
#, c-format
msgid "cannot parse PCI bus '%s'"
msgstr ""

#: src/xenxs/xen_sxpr.c:984
#, c-format
msgid "cannot parse PCI slot '%s'"
msgstr ""

#: src/xenxs/xen_sxpr.c:989
#, c-format
msgid "cannot parse PCI func '%s'"
msgstr ""

#: src/xenxs/xen_sxpr.c:1123
#, fuzzy, c-format
msgid "invalid CPU mask %s"
msgstr "無效的參數，於 %s"

#: src/xenxs/xen_sxpr.c:1137 src/xenxs/xen_sxpr.c:1147
#: src/xenxs/xen_sxpr.c:1157
#, fuzzy, c-format
msgid "unknown lifecycle type %s"
msgstr "未知的作業系統類型 %s"

#: src/xenxs/xen_sxpr.c:1420 src/xenxs/xen_sxpr.c:1465
#, fuzzy, c-format
msgid "unexpected graphics type %d"
msgstr "無預期的 mime 類型"

#: src/xenxs/xen_sxpr.c:1599
#, c-format
msgid "Cannot directly attach floppy %s"
msgstr ""

#: src/xenxs/xen_sxpr.c:1611
#, c-format
msgid "Cannot directly attach CDROM %s"
msgstr ""

#: src/xenxs/xen_sxpr.c:1671 src/xenxs/xen_xm.c:1111
#, c-format
msgid "unsupported disk type %s"
msgstr ""

#: src/xenxs/xen_sxpr.c:1720 src/xenxs/xen_xm.c:1256
#, c-format
msgid "unsupported network type %d"
msgstr ""

#: src/xenxs/xen_sxpr.c:1761 src/xenxs/xen_xm.c:1244
#, fuzzy, c-format
msgid "network %s is not active"
msgstr "網路 %s 已開啟\n"

#: src/xenxs/xen_sxpr.c:1840 src/xenxs/xen_sxpr.c:1890
msgid "managed PCI devices not supported with XenD"
msgstr ""

#: src/xenxs/xen_sxpr.c:2017 src/xenxs/xen_sxpr.c:2024
#: src/xenxs/xen_sxpr.c:2031
#, fuzzy, c-format
msgid "unexpected lifecycle value %d"
msgstr "無預期的數值節點"

#: src/xenxs/xen_sxpr.c:2040 src/xenxs/xen_xm.c:1499
msgid "configurable timezones are not supported"
msgstr ""

#: src/xenxs/xen_sxpr.c:2064
#, fuzzy
msgid "no HVM domain loader"
msgstr "節點的區域清單"

#: src/xenxs/xen_xm.c:59 src/xenxs/xen_xm.c:86 src/xenxs/xen_xm.c:91
#: src/xenxs/xen_xm.c:113
#, c-format
msgid "config value %s was malformed"
msgstr ""

#: src/xenxs/xen_xm.c:134 src/xenxs/xen_xm.c:147
#, c-format
msgid "config value %s was missing"
msgstr ""

#: src/xenxs/xen_xm.c:140
#, c-format
msgid "config value %s was not a string"
msgstr ""

#: src/xenxs/xen_xm.c:331
#, fuzzy, c-format
msgid "unexpected value %s for on_poweroff"
msgstr "無預期的數值節點"

#: src/xenxs/xen_xm.c:339
#, fuzzy, c-format
msgid "unexpected value %s for on_reboot"
msgstr "無預期的數值節點"

#: src/xenxs/xen_xm.c:347
#, fuzzy, c-format
msgid "unexpected value %s for on_crash"
msgstr "無預期的數值節點"

#: src/xenxs/xen_xm.c:418
#, c-format
msgid "Source file %s too big for destination"
msgstr ""

#: src/xenxs/xen_xm.c:437
#, fuzzy, c-format
msgid "Dest file %s too big for destination"
msgstr "無法取得節點資訊"

#: src/xenxs/xen_xm.c:592
#, c-format
msgid "MAC address %s too big for destination"
msgstr ""

#: src/xenxs/xen_xm.c:600
#, c-format
msgid "Bridge %s too big for destination"
msgstr ""

#: src/xenxs/xen_xm.c:608
#, c-format
msgid "Script %s too big for destination"
msgstr ""

#: src/xenxs/xen_xm.c:623
#, c-format
msgid "Type %s too big for destination"
msgstr ""

#: src/xenxs/xen_xm.c:630
#, c-format
msgid "Vifname %s too big for destination"
msgstr ""

#: src/xenxs/xen_xm.c:638
#, c-format
msgid "IP %s too big for destination"
msgstr ""

#: src/xenxs/xen_xm.c:738
#, fuzzy, c-format
msgid "Domain %s too big for destination"
msgstr "區域 %s 正在執行關機\n"

#: src/xenxs/xen_xm.c:748
#, c-format
msgid "Bus %s too big for destination"
msgstr ""

#: src/xenxs/xen_xm.c:758
#, c-format
msgid "Slot %s too big for destination"
msgstr ""

#: src/xenxs/xen_xm.c:768
#, fuzzy, c-format
msgid "Function %s too big for destination"
msgstr "連接客座端主控台"

#: src/xenxs/xen_xm.c:884
#, c-format
msgid "VFB %s too big for destination"
msgstr ""

#: src/xenxs/xen_xm.c:1552 src/xenxs/xen_xm.c:1561 src/xenxs/xen_xm.c:1570
#, fuzzy, c-format
msgid "unexpected lifecycle action %d"
msgstr "無預期的 dict 節點"

#: tools/console.c:297
#, c-format
msgid "unable to get tty attributes: %s"
msgstr ""

#: tools/console.c:306
#, c-format
msgid "unable to set tty attributes: %s"
msgstr ""

#: tools/libvirt-guests.init.sh:137
msgid "libvirt-guests is configured not to start any guests on boot"
msgstr ""

#: tools/libvirt-guests.init.sh:156
#, sh-format
msgid "Ignoring guests on $uri URI"
msgstr ""

#: tools/libvirt-guests.init.sh:160
#, sh-format
msgid "Resuming guests on $uri URI..."
msgstr ""

#: tools/libvirt-guests.init.sh:163
#, sh-format
msgid "Resuming guest $name: "
msgstr ""

#: tools/libvirt-guests.init.sh:166
#, fuzzy
msgid "already active"
msgstr "區域已經啟動"

#: tools/libvirt-guests.init.sh:169 tools/libvirt-guests.init.sh:200
#: tools/libvirt-guests.init.sh:226
msgid "done"
msgstr ""

#: tools/libvirt-guests.init.sh:185
#, sh-format
msgid "Suspending $name: "
msgstr ""

#: tools/libvirt-guests.init.sh:209
#, fuzzy, sh-format
msgid "Shutting down $name: "
msgstr "無法取得網路「%s」"

#: tools/libvirt-guests.init.sh:224
#, fuzzy
msgid "failed to shutdown in time"
msgstr "無法關上區域 %s"

#: tools/libvirt-guests.init.sh:239
msgid "Shutdown action requested but SHUTDOWN_TIMEOUT was not set"
msgstr ""

#: tools/libvirt-guests.init.sh:250
#, sh-format
msgid "Running guests on $uri URI: "
msgstr ""

#: tools/libvirt-guests.init.sh:253
msgid "libvirtd not installed; skipping this URI."
msgstr ""

#: tools/libvirt-guests.init.sh:266
msgid "no running guests."
msgstr ""

#: tools/libvirt-guests.init.sh:277
#, sh-format
msgid "Suspending guests on $uri URI..."
msgstr ""

#: tools/libvirt-guests.init.sh:279
#, fuzzy, sh-format
msgid "Shutting down guests on $uri URI..."
msgstr "無法取得網路「%s」"

#: tools/libvirt-guests.init.sh:310
msgid "stopped, with saved guests"
msgstr ""

#: tools/libvirt-guests.init.sh:314
#, fuzzy
msgid "started"
msgstr "自動啟動"

#: tools/libvirt-guests.init.sh:316
msgid "stopped, with no saved guests"
msgstr ""

#: tools/libvirt-guests.init.sh:326
#, sh-format
msgid ""
"Usage: $program_name {start|stop|status|restart|condrestart|try-restart|"
"reload|force-reload|gueststatus|shutdown}"
msgstr ""

#: tools/virsh.c:367 tools/virsh.c:379 tools/virsh.c:392
#, c-format
msgid "%s: %d: failed to allocate %d bytes"
msgstr "%s：%d：無法分配 %d 位元組"

#: tools/virsh.c:406
#, c-format
msgid "%s: %d: failed to allocate %lu bytes"
msgstr "%s：%d：無法分配 %lu 位元組"

#: tools/virsh.c:573
#, fuzzy
msgid "Failed to reconnect to the hypervisor"
msgstr "無法連上 hypervisor"

#: tools/virsh.c:575
#, fuzzy
msgid "Reconnected to the hypervisor"
msgstr "（重新）連至 hypervisor"

#: tools/virsh.c:588
msgid "print help"
msgstr "列印求助訊息"

#: tools/virsh.c:589
#, fuzzy
msgid ""
"Prints global help, command specific help, or help for a\n"
"    group of related commands"
msgstr "列印一般求助訊息，或特定指令的求助訊息。"

#: tools/virsh.c:596
#, fuzzy
msgid ""
"Prints global help, command specific help, or help for a group of related "
"commands"
msgstr "列印一般求助訊息，或特定指令的求助訊息。"

#: tools/virsh.c:609
#, fuzzy
msgid ""
"Grouped commands:\n"
"\n"
msgstr ""
"指令：\n"
"\n"

#: tools/virsh.c:612 tools/virsh.c:10995
#, c-format
msgid " %s (help keyword '%s'):\n"
msgstr ""

#: tools/virsh.c:630
#, fuzzy, c-format
msgid "command or command group '%s' doesn't exist"
msgstr "「%s」指令不存在"

#: tools/virsh.c:639
msgid "autostart a domain"
msgstr "自動啟動一個區域"

#: tools/virsh.c:641
msgid "Configure a domain to be automatically started at boot."
msgstr "將區域設定為開機時自動啟動。"

#: tools/virsh.c:646 tools/virsh.c:751 tools/virsh.c:937 tools/virsh.c:973
#: tools/virsh.c:1030 tools/virsh.c:1097 tools/virsh.c:1151 tools/virsh.c:1198
#: tools/virsh.c:1458 tools/virsh.c:1504 tools/virsh.c:1542 tools/virsh.c:1596
#: tools/virsh.c:1844 tools/virsh.c:1893 tools/virsh.c:1931 tools/virsh.c:1969
#: tools/virsh.c:2007 tools/virsh.c:2045 tools/virsh.c:2166 tools/virsh.c:2249
#: tools/virsh.c:2452 tools/virsh.c:2627 tools/virsh.c:2713 tools/virsh.c:2847
#: tools/virsh.c:2923 tools/virsh.c:3003 tools/virsh.c:3069 tools/virsh.c:3199
#: tools/virsh.c:3427 tools/virsh.c:3682 tools/virsh.c:3959 tools/virsh.c:8726
#: tools/virsh.c:8801 tools/virsh.c:8862 tools/virsh.c:8927 tools/virsh.c:8992
#: tools/virsh.c:9062 tools/virsh.c:9175 tools/virsh.c:9318 tools/virsh.c:9451
#: tools/virsh.c:10025 tools/virsh.c:10176 tools/virsh.c:10274
#: tools/virsh.c:10331 tools/virsh.c:10448 tools/virsh.c:10504
#: tools/virsh.c:10555 tools/virsh.c:10611
msgid "domain name, id or uuid"
msgstr "區域名稱、id 或 uuid"

#: tools/virsh.c:647 tools/virsh.c:4005 tools/virsh.c:5320
msgid "disable autostarting"
msgstr "停用自動啟動"

#: tools/virsh.c:668
#, fuzzy, c-format
msgid "Failed to mark domain %s as autostarted"
msgstr "無法將區域 %s 標示為 %s 自動啟動"

#: tools/virsh.c:670
#, fuzzy, c-format
msgid "Failed to unmark domain %s as autostarted"
msgstr "無法將區域 %s 標示為 %s 自動啟動"

#: tools/virsh.c:676
#, fuzzy, c-format
msgid "Domain %s marked as autostarted\n"
msgstr "區域 %s %s已標記為自動啟動\n"

#: tools/virsh.c:678
#, fuzzy, c-format
msgid "Domain %s unmarked as autostarted\n"
msgstr "區域 %s %s已標記為自動啟動\n"

#: tools/virsh.c:688
msgid "(re)connect to hypervisor"
msgstr "（重新）連至 hypervisor"

#: tools/virsh.c:690
msgid ""
"Connect to local hypervisor. This is built-in command after shell start up."
msgstr "連上本機的 hypervisor。這是 shell 啟動後的內建指令。"

#: tools/virsh.c:696
msgid "hypervisor connection URI"
msgstr "hypervisor 連線的 URI"

#: tools/virsh.c:697
msgid "read-only connection"
msgstr "唯讀的連線"

#: tools/virsh.c:710 tools/virsh.c:12453
#, fuzzy, c-format
msgid "Failed to disconnect from the hypervisor, %d leaked reference(s)"
msgstr "無法從 hypervisor 處斷線"

#: tools/virsh.c:718
#, fuzzy
msgid "Please specify valid connection URI"
msgstr "hypervisor 連線的 URI"

#: tools/virsh.c:733
msgid "Failed to connect to the hypervisor"
msgstr "無法連上 hypervisor"

#: tools/virsh.c:744
msgid "connect to the guest console"
msgstr "連接客座端主控台"

#: tools/virsh.c:746
msgid "Connect the virtual serial console for the guest"
msgstr "透過虛擬序列埠主控台，連接用戶端"

#: tools/virsh.c:752
#, fuzzy
msgid "character device name"
msgstr "未知的作業系統類型 %s"

#: tools/virsh.c:763
#, fuzzy
msgid "Unable to get domain status"
msgstr "無法取得區域「%s」"

#: tools/virsh.c:768
#, fuzzy
msgid "The domain is not running"
msgstr "區域還在執行中"

#: tools/virsh.c:772
#, fuzzy, c-format
msgid "Connected to domain %s\n"
msgstr "無法開啟區域 %s"

#: tools/virsh.c:773
msgid "Escape character is ^]\n"
msgstr ""

#: tools/virsh.c:796
#, fuzzy
msgid "Invalid devname"
msgstr "無效的區域指標，於 %s"

#: tools/virsh.c:814
msgid "list domains"
msgstr "列出區域"

#: tools/virsh.c:815
msgid "Returns list of domains."
msgstr "傳回區域清單。"

#: tools/virsh.c:820
msgid "list inactive domains"
msgstr "列出非作用中的區域"

#: tools/virsh.c:821
msgid "list inactive & active domains"
msgstr "列出作用中與非作用中的區域"

#: tools/virsh.c:843 tools/virsh.c:850
msgid "Failed to list active domains"
msgstr "無法列出運作中的區域"

#: tools/virsh.c:861 tools/virsh.c:869
msgid "Failed to list inactive domains"
msgstr "無法列出非作用中的區域"

#: tools/virsh.c:878
msgid "Id"
msgstr "Id"

#: tools/virsh.c:878 tools/virsh.c:4243 tools/virsh.c:4437 tools/virsh.c:4710
#: tools/virsh.c:5183 tools/virsh.c:6160 tools/virsh.c:6180 tools/virsh.c:6249
#: tools/virsh.c:7634 tools/virsh.c:7649 tools/virsh.c:7694
#: tools/virsh.c:10365
msgid "Name"
msgstr "名稱"

#: tools/virsh.c:878 tools/virsh.c:4437 tools/virsh.c:4710 tools/virsh.c:6160
#: tools/virsh.c:6185 tools/virsh.c:6249 tools/virsh.c:10365
msgid "State"
msgstr "狀態"

#: tools/virsh.c:891 tools/virsh.c:913 tools/virsh.c:11964 tools/virsh.c:11980
msgid "no state"
msgstr "無狀態"

#: tools/virsh.c:931
msgid "domain state"
msgstr "區域狀態"

#: tools/virsh.c:932
#, fuzzy
msgid "Returns state about a domain."
msgstr "傳回執行中區域的狀態"

#: tools/virsh.c:967
msgid "get device block stats for a domain"
msgstr ""

#: tools/virsh.c:968
#, fuzzy
msgid "Get device block stats for a running domain."
msgstr "傳回執行中區域的狀態"

#: tools/virsh.c:974 tools/virsh.c:1152
#, fuzzy
msgid "block device"
msgstr "以組絕"

#: tools/virsh.c:997
#, fuzzy, c-format
msgid "Failed to get block stats %s %s"
msgstr "無法將區域 %s 存至 %s"

#: tools/virsh.c:1024
#, fuzzy
msgid "get network interface stats for a domain"
msgstr "網路名稱"

#: tools/virsh.c:1025
#, fuzzy
msgid "Get network interface stats for a running domain."
msgstr "傳回執行中區域的狀態"

#: tools/virsh.c:1031
msgid "interface device"
msgstr ""

#: tools/virsh.c:1054
#, fuzzy, c-format
msgid "Failed to get interface stats %s %s"
msgstr "無法取得節點資訊"

#: tools/virsh.c:1091
#, fuzzy
msgid "get memory statistics for a domain"
msgstr "網路名稱"

#: tools/virsh.c:1092
#, fuzzy
msgid "Get memory statistics for a runnng domain."
msgstr "傳回執行中區域的狀態"

#: tools/virsh.c:1117
#, fuzzy, c-format
msgid "Failed to get memory statistics for domain %s"
msgstr "無法開啟區域 %s"

#: tools/virsh.c:1145
#, fuzzy
msgid "domain block device size information"
msgstr "找不到裝置的資訊"

#: tools/virsh.c:1146
#, fuzzy
msgid "Get block device size info for a domain."
msgstr "傳回執行中區域的狀態"

#: tools/virsh.c:1180 tools/virsh.c:6516 tools/virsh.c:7416
msgid "Capacity:"
msgstr ""

#: tools/virsh.c:1181 tools/virsh.c:6519 tools/virsh.c:7419
#, fuzzy
msgid "Allocation:"
msgstr "分配區域"

#: tools/virsh.c:1182
msgid "Physical:"
msgstr ""

#: tools/virsh.c:1192
msgid "suspend a domain"
msgstr "暫停區域"

#: tools/virsh.c:1193
msgid "Suspend a running domain."
msgstr "暫停執行中的區域。"

#: tools/virsh.c:1216
#, c-format
msgid "Domain %s suspended\n"
msgstr "區域 %s 已經暫停\n"

#: tools/virsh.c:1218
#, c-format
msgid "Failed to suspend domain %s"
msgstr "無法暫停區域 %s"

#: tools/virsh.c:1230
msgid "create a domain from an XML file"
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:1231
msgid "Create a domain."
msgstr "建立區域。"

#: tools/virsh.c:1236 tools/virsh.c:1296
#, fuzzy
msgid "file containing an XML domain description"
msgstr "包含 XML 區域描述的檔案"

#: tools/virsh.c:1238 tools/virsh.c:1399
msgid "attach to console after creation"
msgstr ""

#: tools/virsh.c:1240 tools/virsh.c:1401
msgid "leave the guest paused after creation"
msgstr ""

#: tools/virsh.c:1272
#, c-format
msgid "Domain %s created from %s\n"
msgstr "區域 %s 建立自 %s\n"

#: tools/virsh.c:1280
#, c-format
msgid "Failed to create domain from %s"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:1290
msgid "define (but don't start) a domain from an XML file"
msgstr "從 XML 檔案定義（但不啟動）區域"

#: tools/virsh.c:1291
msgid "Define a domain."
msgstr "定義區域。"

#: tools/virsh.c:1321
#, c-format
msgid "Domain %s defined from %s\n"
msgstr "區域 %s 定義自 %s\n"

#: tools/virsh.c:1325
#, c-format
msgid "Failed to define domain from %s"
msgstr "無法從 %s 定義區域"

#: tools/virsh.c:1335
msgid "undefine an inactive domain"
msgstr "取消定義非作用中的區域"

#: tools/virsh.c:1336
msgid "Undefine the configuration for an inactive domain."
msgstr "為非作用中的區域取消定義。"

#: tools/virsh.c:1341 tools/virsh.c:3602
msgid "domain name or uuid"
msgstr "區域名稱或 uuid"

#: tools/virsh.c:1362
#, c-format
msgid ""
"a running domain like %s cannot be undefined;\n"
"to undefine, first shutdown then undefine using its name or UUID"
msgstr ""

#: tools/virsh.c:1374
#, c-format
msgid "Domain %s has been undefined\n"
msgstr "區域 %s 已經取消定義\n"

#: tools/virsh.c:1376
#, c-format
msgid "Failed to undefine domain %s"
msgstr "無法為區域 %s 取消定義"

#: tools/virsh.c:1389
msgid "start a (previously defined) inactive domain"
msgstr "開啟（先前定義的）非作用中區域"

#: tools/virsh.c:1390
msgid ""
"Start a domain, either from the last managedsave\n"
"    state, or via a fresh boot if no managedsave state\n"
"    is present."
msgstr ""

#: tools/virsh.c:1397
msgid "name of the inactive domain"
msgstr "非作用中區域的名稱"

#: tools/virsh.c:1423
msgid "Domain is already active"
msgstr "區域已經啟動"

#: tools/virsh.c:1434
#, c-format
msgid "Domain %s started\n"
msgstr "區域 %s 已開啟\n"

#: tools/virsh.c:1441
#, c-format
msgid "Failed to start domain %s"
msgstr "無法開啟區域 %s"

#: tools/virsh.c:1452
msgid "save a domain state to a file"
msgstr "將區域狀態存至檔案"

#: tools/virsh.c:1453
msgid "Save a running domain."
msgstr "儲存執行中的區域。"

#: tools/virsh.c:1459
msgid "where to save the data"
msgstr "將資料存至何處"

#: tools/virsh.c:1481
#, c-format
msgid "Domain %s saved to %s\n"
msgstr "區域 %s 已存至 %s\n"

#: tools/virsh.c:1483
#, c-format
msgid "Failed to save domain %s to %s"
msgstr "無法將區域 %s 存至 %s"

#: tools/virsh.c:1495
#, fuzzy
msgid "managed save of a domain state"
msgstr "將區域狀態存至檔案"

#: tools/virsh.c:1496
msgid ""
"Save and destroy a running domain, so it can be restarted from\n"
"    the same state at a later time.  When the virsh 'start'\n"
"    command is next run for the domain, it will automatically\n"
"    be started from this saved state."
msgstr ""

#: tools/virsh.c:1522
#, fuzzy, c-format
msgid "Domain %s state saved by libvirt\n"
msgstr "區域 %s 已開啟\n"

#: tools/virsh.c:1524
#, fuzzy, c-format
msgid "Failed to save domain %s state"
msgstr "無法將區域 %s 存至 %s"

#: tools/virsh.c:1536
msgid "Remove managed save of a domain"
msgstr ""

#: tools/virsh.c:1537
msgid "Remove an existing managed save state file from a domain"
msgstr ""

#: tools/virsh.c:1562
#, fuzzy
msgid "Failed to check for domain managed save image"
msgstr "無法從 %s 回復區域"

#: tools/virsh.c:1568
#, fuzzy, c-format
msgid "Failed to remove managed save image for domain %s"
msgstr "無法繼續區域 %s"

#: tools/virsh.c:1573
#, c-format
msgid "Removed managedsave image for domain %s"
msgstr ""

#: tools/virsh.c:1576
#, c-format
msgid "Domain %s has no manage save image; removal skipped"
msgstr ""

#: tools/virsh.c:1590
msgid "show/set scheduler parameters"
msgstr ""

#: tools/virsh.c:1591
msgid "Show/Set scheduler parameters."
msgstr ""

#: tools/virsh.c:1597
msgid "parameter=value"
msgstr ""

#: tools/virsh.c:1598
msgid "weight for XEN_CREDIT"
msgstr ""

#: tools/virsh.c:1599
msgid "cap for XEN_CREDIT"
msgstr ""

#: tools/virsh.c:1615
#, fuzzy
msgid "Invalid value of weight"
msgstr "記憶體大小 %d 不是有效的數值"

#: tools/virsh.c:1629
#, fuzzy
msgid "Invalid value of cap"
msgstr "記憶體大小 %d 不是有效的數值"

#: tools/virsh.c:1641
msgid "Invalid syntax for --set, expecting name=value"
msgstr ""

#: tools/virsh.c:1656
msgid "Invalid value for parameter, expecting an int"
msgstr ""

#: tools/virsh.c:1663
msgid "Invalid value for parameter, expecting an unsigned int"
msgstr ""

#: tools/virsh.c:1670
msgid "Invalid value for parameter, expecting a long long"
msgstr ""

#: tools/virsh.c:1677
msgid "Invalid value for parameter, expecting an unsigned long long"
msgstr ""

#: tools/virsh.c:1683
msgid "Invalid value for parameter, expecting a double"
msgstr ""

#: tools/virsh.c:1717 tools/virsh.c:1721
msgid "Scheduler"
msgstr ""

#: tools/virsh.c:1721
#, fuzzy
msgid "Unknown"
msgstr "未知的主機"

#: tools/virsh.c:1758
#, fuzzy, c-format
msgid "invalid scheduler option: %s"
msgstr "無效的參數，於 %s"

#: tools/virsh.c:1801
msgid "restore a domain from a saved state in a file"
msgstr "從檔案中的儲存狀態回復區域"

#: tools/virsh.c:1802
msgid "Restore a domain."
msgstr "回復區域。"

#: tools/virsh.c:1807
msgid "the state to restore"
msgstr "要回復的狀態"

#: tools/virsh.c:1824
#, c-format
msgid "Domain restored from %s\n"
msgstr "從 %s 回復區域\n"

#: tools/virsh.c:1826
#, c-format
msgid "Failed to restore domain from %s"
msgstr "無法從 %s 回復區域"

#: tools/virsh.c:1836
msgid "dump the core of a domain to a file for analysis"
msgstr "將一個區域的核心傾印到檔案中，以供分析用"

#: tools/virsh.c:1837
msgid "Core dump a domain."
msgstr "傾印一個區域的核心。"

#: tools/virsh.c:1842
msgid "perform a live core dump if supported"
msgstr ""

#: tools/virsh.c:1843
msgid "crash the domain after core dump"
msgstr ""

#: tools/virsh.c:1845
msgid "where to dump the core"
msgstr "將核心傾印至何處"

#: tools/virsh.c:1873
#, fuzzy, c-format
msgid "Domain %s dumped to %s\n"
msgstr "區域 %s 已傾印至 %s\n"

#: tools/virsh.c:1875
#, c-format
msgid "Failed to core dump domain %s to %s"
msgstr "無法將區域 %s 的核心傾印至 %s"

#: tools/virsh.c:1887
msgid "resume a domain"
msgstr "繼續執行區域"

#: tools/virsh.c:1888
msgid "Resume a previously suspended domain."
msgstr "繼續一項先前暫停的區域。"

#: tools/virsh.c:1911
#, c-format
msgid "Domain %s resumed\n"
msgstr "區域 %s 已經繼續執行\n"

#: tools/virsh.c:1913
#, c-format
msgid "Failed to resume domain %s"
msgstr "無法繼續區域 %s"

#: tools/virsh.c:1925
msgid "gracefully shutdown a domain"
msgstr "以正確方法讓區域停機"

#: tools/virsh.c:1926
msgid "Run shutdown in the target domain."
msgstr "在目標區域執行關機。"

#: tools/virsh.c:1949
#, c-format
msgid "Domain %s is being shutdown\n"
msgstr "區域 %s 正在執行關機\n"

#: tools/virsh.c:1951
#, c-format
msgid "Failed to shutdown domain %s"
msgstr "無法關上區域 %s"

#: tools/virsh.c:1963
msgid "reboot a domain"
msgstr "重新啟動區域"

#: tools/virsh.c:1964
msgid "Run a reboot command in the target domain."
msgstr "在目標區域中執行重新開機指令。"

#: tools/virsh.c:1987
#, c-format
msgid "Domain %s is being rebooted\n"
msgstr "區域 %s 正在重新開機中\n"

#: tools/virsh.c:1989
#, c-format
msgid "Failed to reboot domain %s"
msgstr "無法重新啟動區域 %s"

#: tools/virsh.c:2001
msgid "destroy a domain"
msgstr "刪除一個區域"

#: tools/virsh.c:2002
msgid "Destroy a given domain."
msgstr "刪除給定的區域。"

#: tools/virsh.c:2025
#, c-format
msgid "Domain %s destroyed\n"
msgstr "區域 %s 已經刪除\n"

#: tools/virsh.c:2027
#, c-format
msgid "Failed to destroy domain %s"
msgstr "無法刪除區域 %s"

#: tools/virsh.c:2039
msgid "domain information"
msgstr "區域資訊"

#: tools/virsh.c:2040
msgid "Returns basic information about the domain."
msgstr "傳回區域的相關資訊。"

#: tools/virsh.c:2069 tools/virsh.c:2071
msgid "Id:"
msgstr "Id:"

#: tools/virsh.c:2072 tools/virsh.c:6466 tools/virsh.c:7406
msgid "Name:"
msgstr "名稱："

#: tools/virsh.c:2075 tools/virsh.c:6469
msgid "UUID:"
msgstr "UUID："

#: tools/virsh.c:2078
msgid "OS Type:"
msgstr "作業系統類型："

#: tools/virsh.c:2083 tools/virsh.c:2671 tools/virsh.c:6476 tools/virsh.c:6480
#: tools/virsh.c:6484 tools/virsh.c:6488 tools/virsh.c:6492
msgid "State:"
msgstr "狀態："

#: tools/virsh.c:2086 tools/virsh.c:3379
msgid "CPU(s):"
msgstr "處理器數目："

#: tools/virsh.c:2093 tools/virsh.c:2678
msgid "CPU time:"
msgstr "處理器時間："

#: tools/virsh.c:2097 tools/virsh.c:2100
msgid "Max memory:"
msgstr "最大記憶體："

#: tools/virsh.c:2101
msgid "no limit"
msgstr "沒有限制"

#: tools/virsh.c:2103
msgid "Used memory:"
msgstr "已使用的記憶體："

#: tools/virsh.c:2114 tools/virsh.c:2116 tools/virsh.c:4254 tools/virsh.c:4256
#: tools/virsh.c:6501 tools/virsh.c:6503
msgid "Persistent:"
msgstr ""

#: tools/virsh.c:2114 tools/virsh.c:4254 tools/virsh.c:6026 tools/virsh.c:6041
#: tools/virsh.c:6043 tools/virsh.c:6044 tools/virsh.c:6045 tools/virsh.c:6501
#: tools/virsh.c:7553 tools/virsh.c:7560 tools/virsh.c:7561 tools/virsh.c:7562
#, fuzzy
msgid "unknown"
msgstr "未知的主機"

#: tools/virsh.c:2116 tools/virsh.c:4250 tools/virsh.c:4256 tools/virsh.c:4261
#: tools/virsh.c:4456 tools/virsh.c:4479 tools/virsh.c:6019 tools/virsh.c:6029
#: tools/virsh.c:6503 tools/virsh.c:6511
msgid "yes"
msgstr ""

#: tools/virsh.c:2116 tools/virsh.c:4250 tools/virsh.c:4256 tools/virsh.c:4261
#: tools/virsh.c:4456 tools/virsh.c:4479 tools/virsh.c:6019 tools/virsh.c:6029
#: tools/virsh.c:6503 tools/virsh.c:6511
#, fuzzy
msgid "no"
msgstr "節點"

#: tools/virsh.c:2120 tools/virsh.c:4259 tools/virsh.c:4261 tools/virsh.c:6509
#: tools/virsh.c:6511
#, fuzzy
msgid "Autostart:"
msgstr "自動啟動"

#: tools/virsh.c:2121
msgid "enable"
msgstr ""

#: tools/virsh.c:2121
msgid "disable"
msgstr ""

#: tools/virsh.c:2137
msgid "Security model:"
msgstr ""

#: tools/virsh.c:2138
msgid "Security DOI:"
msgstr ""

#: tools/virsh.c:2147
msgid "Security label:"
msgstr ""

#: tools/virsh.c:2160
#, fuzzy
msgid "domain job information"
msgstr "區域資訊"

#: tools/virsh.c:2161
#, fuzzy
msgid "Returns information about jobs running on a domain."
msgstr "傳回執行中區域的狀態"

#: tools/virsh.c:2188
msgid "Job type:"
msgstr ""

#: tools/virsh.c:2191
msgid "Bounded"
msgstr ""

#: tools/virsh.c:2195
msgid "Unbounded"
msgstr ""

#: tools/virsh.c:2200
msgid "None"
msgstr ""

#: tools/virsh.c:2204
msgid "Time elapsed:"
msgstr ""

#: tools/virsh.c:2206
msgid "Time remaining:"
msgstr ""

#: tools/virsh.c:2209
msgid "Data processed:"
msgstr ""

#: tools/virsh.c:2211
msgid "Data remaining:"
msgstr ""

#: tools/virsh.c:2213
msgid "Data total:"
msgstr ""

#: tools/virsh.c:2217
#, fuzzy
msgid "Memory processed:"
msgstr "記憶體大小："

#: tools/virsh.c:2219
#, fuzzy
msgid "Memory remaining:"
msgstr "記憶體大小："

#: tools/virsh.c:2221
#, fuzzy
msgid "Memory total:"
msgstr "記憶體大小："

#: tools/virsh.c:2225
msgid "File processed:"
msgstr ""

#: tools/virsh.c:2227
msgid "File remaining:"
msgstr ""

#: tools/virsh.c:2229
msgid "File total:"
msgstr ""

#: tools/virsh.c:2243
#, fuzzy
msgid "abort active domain job"
msgstr "列出非作用中的區域"

#: tools/virsh.c:2244
#, fuzzy
msgid "Aborts the currently running domain job"
msgstr "傳回執行中區域的狀態"

#: tools/virsh.c:2276
#, fuzzy
msgid "NUMA free memory"
msgstr "已使用的記憶體："

#: tools/virsh.c:2277
msgid "display available free memory for the NUMA cell."
msgstr ""

#: tools/virsh.c:2282
#, fuzzy
msgid "NUMA cell number"
msgstr "NUMA cell："

#: tools/virsh.c:2283
msgid "show free memory for all NUMA cells"
msgstr ""

#: tools/virsh.c:2309
msgid "cell number has to be a number"
msgstr ""

#: tools/virsh.c:2315
msgid "--cellno and --all are mutually exclusive. Please choose only one."
msgstr ""

#: tools/virsh.c:2323 tools/virsh.c:2332
#, fuzzy
msgid "unable to get node capabilities"
msgstr "無法取得能力方面的資訊"

#: tools/virsh.c:2341
#, fuzzy
msgid "could not get information about NUMA topology"
msgstr "XML 格式的網路資訊"

#: tools/virsh.c:2353
#, fuzzy
msgid "conversion from string failed"
msgstr "操作失敗"

#: tools/virsh.c:2361
#, fuzzy, c-format
msgid "failed to get free memory for NUMA node number: %lu"
msgstr "無法分配節點"

#: tools/virsh.c:2375 tools/virsh.c:2388
msgid "Total"
msgstr ""

#: tools/virsh.c:2410
msgid "connection vcpu maximum"
msgstr ""

#: tools/virsh.c:2411
msgid "Show maximum number of virtual CPUs for guests on this connection."
msgstr ""

#: tools/virsh.c:2416
#, fuzzy
msgid "domain type"
msgstr "區域狀態"

#: tools/virsh.c:2427
#, fuzzy
msgid "Invalid type"
msgstr "無效的參數，於 %s"

#: tools/virsh.c:2446
#, fuzzy
msgid "domain vcpu counts"
msgstr "區域的 vcpus"

#: tools/virsh.c:2447
#, fuzzy
msgid "Returns the number of virtual CPUs used by the domain."
msgstr "改變在客座區域中啟用的虛擬器處理器數量"

#: tools/virsh.c:2453
msgid "get maximum cap on vcpus"
msgstr ""

#: tools/virsh.c:2454
msgid "get current vcpu usage"
msgstr ""

#: tools/virsh.c:2455
msgid "get value to be used on next boot"
msgstr ""

#: tools/virsh.c:2456
#, fuzzy
msgid "get value from running domain"
msgstr "儲存執行中的區域。"

#: tools/virsh.c:2474
msgid "--maximum and --current cannot both be specified"
msgstr ""

#: tools/virsh.c:2479
msgid "--config and --live cannot both be specified"
msgstr ""

#: tools/virsh.c:2486
#, c-format
msgid "when using --%s, either --%s or --%s must be specified"
msgstr ""

#: tools/virsh.c:2524 tools/virsh.c:2545
msgid "maximum"
msgstr ""

#: tools/virsh.c:2524 tools/virsh.c:2582
msgid "config"
msgstr ""

#: tools/virsh.c:2545 tools/virsh.c:2604
msgid "live"
msgstr ""

#: tools/virsh.c:2582 tools/virsh.c:2604
msgid "current"
msgstr ""

#: tools/virsh.c:2621
#, fuzzy
msgid "detailed domain vcpu information"
msgstr "區域 vcpu 的資訊"

#: tools/virsh.c:2622
msgid "Returns basic information about the domain virtual CPUs."
msgstr "傳回區域的虛擬處理器之基本資訊。"

#: tools/virsh.c:2669
msgid "VCPU:"
msgstr "VCPU："

#: tools/virsh.c:2670
msgid "CPU:"
msgstr "處理器："

#: tools/virsh.c:2680
msgid "CPU Affinity:"
msgstr "處理器的同屬："

#: tools/virsh.c:2692
msgid "Domain shut off, virtual CPUs not present."
msgstr ""

#: tools/virsh.c:2707
msgid "control domain vcpu affinity"
msgstr "控制區域 vcpu 的同屬"

#: tools/virsh.c:2708
msgid "Pin domain VCPUs to host physical CPUs."
msgstr "讓區域 VCPU 符合主機的實際處理器。"

#: tools/virsh.c:2714
msgid "vcpu number"
msgstr "vcpu 數量"

#: tools/virsh.c:2715
msgid "host cpu number(s) (comma separated)"
msgstr "主機處理器數目（以逗號隔開）"

#: tools/virsh.c:2740
msgid "vcpupin: Invalid or missing vCPU number."
msgstr ""

#: tools/virsh.c:2756
#, fuzzy
msgid "vcpupin: failed to get domain informations."
msgstr "無法取得節點資訊"

#: tools/virsh.c:2762
msgid "vcpupin: Invalid vCPU number."
msgstr ""

#: tools/virsh.c:2771
msgid "cpulist: Invalid format. Empty string."
msgstr ""

#: tools/virsh.c:2781
#, c-format
msgid ""
"cpulist: %s: Invalid format. Expecting digit at position %d (near '%c')."
msgstr ""

#: tools/virsh.c:2793
#, c-format
msgid ""
"cpulist: %s: Invalid format. Expecting digit or comma at position %d (near "
"'%c')."
msgstr ""

#: tools/virsh.c:2802
#, c-format
msgid "cpulist: %s: Invalid format. Trailing comma at position %d."
msgstr ""

#: tools/virsh.c:2818
#, c-format
msgid "Physical CPU %d doesn't exist."
msgstr "實體處理器「%d」不存在。"

#: tools/virsh.c:2841
msgid "change number of virtual CPUs"
msgstr "改變虛擬處理器的數量"

#: tools/virsh.c:2842
#, fuzzy
msgid "Change the number of virtual CPUs in the guest domain."
msgstr "改變在客座區域中啟用的虛擬器處理器數量"

#: tools/virsh.c:2848
msgid "number of virtual CPUs"
msgstr "虛擬處理器的數量"

#: tools/virsh.c:2849
msgid "set maximum limit on next boot"
msgstr ""

#: tools/virsh.c:2850 tools/virsh.c:2925
msgid "affect next boot"
msgstr ""

#: tools/virsh.c:2851 tools/virsh.c:2926
#, fuzzy
msgid "affect running domain"
msgstr "儲存執行中的區域。"

#: tools/virsh.c:2875
#, fuzzy
msgid "Invalid number of virtual CPUs"
msgstr "虛擬處理器的數量"

#: tools/virsh.c:2896
msgid "--maximum must be used with --config only"
msgstr ""

#: tools/virsh.c:2917
msgid "change memory allocation"
msgstr "改變記憶體分配"

#: tools/virsh.c:2918
msgid "Change the current memory allocation in the guest domain."
msgstr "改變客座區域中，目前的記憶體分配。"

#: tools/virsh.c:2924
#, fuzzy
msgid "number of kilobytes of memory"
msgstr "記憶體數量（位元組）"

#: tools/virsh.c:2956 tools/virsh.c:3023
msgid "memory size has to be a number"
msgstr ""

#: tools/virsh.c:2962
#, fuzzy, c-format
msgid "Invalid value of %lu for memory size"
msgstr "記憶體大小 %d 不是有效的數值"

#: tools/virsh.c:2968
msgid "Unable to verify MaxMemorySize"
msgstr ""

#: tools/virsh.c:2974
#, c-format
msgid "Requested memory size %lu kb is larger than maximum of %lu kb"
msgstr ""

#: tools/virsh.c:2997
msgid "change maximum memory limit"
msgstr "改變最大記憶體的限制"

#: tools/virsh.c:2998
msgid "Change the maximum memory allocation limit in the guest domain."
msgstr "改變客座區域的最大記憶體分配限制。"

#: tools/virsh.c:3004
#, fuzzy
msgid "maximum memory limit in kilobytes"
msgstr "最大記憶體限制（位元組）"

#: tools/virsh.c:3029
#, c-format
msgid "Invalid value of %d for memory size"
msgstr "記憶體大小 %d 不是有效的數值"

#: tools/virsh.c:3035
msgid "Unable to verify current MemorySize"
msgstr ""

#: tools/virsh.c:3040
msgid "Unable to change MaxMemorySize"
msgstr ""

#: tools/virsh.c:3047
#, fuzzy
msgid "Unable to shrink current MemorySize"
msgstr "區域目前的記憶體"

#: tools/virsh.c:3060
msgid "Get or set blkio parameters"
msgstr ""

#: tools/virsh.c:3061
msgid ""
"Get or set the current blkio parameters for a guest domain.\n"
"    To get the blkio parameters use following command: \n"
"\n"
"    virsh # blkiotune <domain>"
msgstr ""

#: tools/virsh.c:3071
msgid "IO Weight in range [100, 1000]"
msgstr ""

#: tools/virsh.c:3093 tools/virsh.c:3233
#, fuzzy
msgid "Unable to parse integer parameter"
msgstr "無法開啟檔案"

#: tools/virsh.c:3101
#, fuzzy, c-format
msgid "Invalid value of %d for I/O weight"
msgstr "記憶體大小 %d 不是有效的數值"

#: tools/virsh.c:3110
#, fuzzy
msgid "Unable to get number of blkio parameters"
msgstr "無法繼續區域 %s"

#: tools/virsh.c:3123
#, fuzzy
msgid "Unable to get blkio parameters"
msgstr "無法取得 hypervisor 類型"

#: tools/virsh.c:3175
#, fuzzy
msgid "Unable to change blkio parameters"
msgstr "無法取得 hypervisor 類型"

#: tools/virsh.c:3190
msgid "Get or set memory parameters"
msgstr ""

#: tools/virsh.c:3191
msgid ""
"Get or set the current memory parameters for a guest domain.\n"
"    To get the memory parameters use following command: \n"
"\n"
"    virsh # memtune <domain>"
msgstr ""

#: tools/virsh.c:3201
#, fuzzy
msgid "Max memory in kilobytes"
msgstr "最大記憶體限制（位元組）"

#: tools/virsh.c:3203
#, fuzzy
msgid "Memory during contention in kilobytes"
msgstr "最大記憶體限制（位元組）"

#: tools/virsh.c:3205
#, fuzzy
msgid "Max memory plus swap in kilobytes"
msgstr "最大記憶體限制（位元組）"

#: tools/virsh.c:3207
#, fuzzy
msgid "Min guaranteed memory in kilobytes"
msgstr "最大記憶體限制（位元組）"

#: tools/virsh.c:3253
msgid "Unable to get number of memory parameters"
msgstr ""

#: tools/virsh.c:3266
msgid "Unable to get memory parameters"
msgstr ""

#: tools/virsh.c:3346
msgid "Unable to change memory parameters"
msgstr ""

#: tools/virsh.c:3361
msgid "node information"
msgstr "節點資訊"

#: tools/virsh.c:3362
msgid "Returns basic information about the node."
msgstr "傳回節點的基本資訊。"

#: tools/virsh.c:3375
msgid "failed to get node information"
msgstr "無法取得節點資訊"

#: tools/virsh.c:3378
msgid "CPU model:"
msgstr "處理器類型："

#: tools/virsh.c:3380
msgid "CPU frequency:"
msgstr "處理器的頻率："

#: tools/virsh.c:3381
msgid "CPU socket(s):"
msgstr "處理器的插槽："

#: tools/virsh.c:3382
msgid "Core(s) per socket:"
msgstr "每個插槽的核心："

#: tools/virsh.c:3383
msgid "Thread(s) per core:"
msgstr "每個核心的執行續："

#: tools/virsh.c:3384
msgid "NUMA cell(s):"
msgstr "NUMA cell："

#: tools/virsh.c:3385
msgid "Memory size:"
msgstr "記憶體大小："

#: tools/virsh.c:3394
msgid "capabilities"
msgstr "能力"

#: tools/virsh.c:3395
msgid "Returns capabilities of hypervisor/driver."
msgstr "傳回 hypervisor 或驅動程式的能力。"

#: tools/virsh.c:3408
msgid "failed to get capabilities"
msgstr "無法取得能力方面的資訊"

#: tools/virsh.c:3421
msgid "domain information in XML"
msgstr "XML 格式的區域資訊"

#: tools/virsh.c:3422
#, fuzzy
msgid "Output the domain information as an XML dump to stdout."
msgstr "將區域資訊以 XML 格式輸出到螢幕上。"

#: tools/virsh.c:3428 tools/virsh.c:4825
#, fuzzy
msgid "show inactive defined XML"
msgstr "列出非作用中的區域"

#: tools/virsh.c:3429
msgid "include security sensitive information in XML dump"
msgstr ""

#: tools/virsh.c:3430
msgid "update guest CPU according to host CPU"
msgstr ""

#: tools/virsh.c:3474
#, fuzzy
msgid "Convert native config to domain XML"
msgstr "將區域名稱或 ID 轉為 UUID"

#: tools/virsh.c:3475
#, fuzzy
msgid "Convert native guest configuration format to domain XML format."
msgstr "為非作用中的區域取消定義。"

#: tools/virsh.c:3480
msgid "source config data format"
msgstr ""

#: tools/virsh.c:3481
#, fuzzy
msgid "config data file to import from"
msgstr "設定檔語法錯誤"

#: tools/virsh.c:3520
msgid "Convert domain XML to native config"
msgstr ""

#: tools/virsh.c:3521
msgid "Convert domain XML config to a native guest configuration format."
msgstr ""

#: tools/virsh.c:3526
msgid "target config data type format"
msgstr ""

#: tools/virsh.c:3527
msgid "xml data file to export from"
msgstr ""

#: tools/virsh.c:3566
msgid "convert a domain id or UUID to domain name"
msgstr "將區域 id 或 UUID 轉為區域名稱"

#: tools/virsh.c:3572
msgid "domain id or uuid"
msgstr "區域 id 或 uuid"

#: tools/virsh.c:3596
msgid "convert a domain name or UUID to domain id"
msgstr "將區域名稱或 UUID 轉為區域 ID"

#: tools/virsh.c:3631
msgid "convert a domain name or id to domain UUID"
msgstr "將區域名稱或 ID 轉為 UUID"

#: tools/virsh.c:3637
msgid "domain id or name"
msgstr "區域 ID 或名稱"

#: tools/virsh.c:3656
msgid "failed to get domain UUID"
msgstr "無法取得區域 UUID"

#: tools/virsh.c:3666
msgid "migrate domain to another host"
msgstr ""

#: tools/virsh.c:3667
msgid "Migrate domain to another host.  Add --live for live migration."
msgstr ""

#: tools/virsh.c:3672
#, fuzzy
msgid "live migration"
msgstr "節點資訊"

#: tools/virsh.c:3673
#, fuzzy
msgid "peer-2-peer migration"
msgstr "節點資訊"

#: tools/virsh.c:3674
#, fuzzy
msgid "direct migration"
msgstr "節點資訊"

#: tools/virsh.c:3675
#, fuzzy
msgid "tunnelled migration"
msgstr "節點資訊"

#: tools/virsh.c:3676
msgid "persist VM on destination"
msgstr ""

#: tools/virsh.c:3677
#, fuzzy
msgid "undefine VM on source"
msgstr "未定義的網路名稱"

#: tools/virsh.c:3678
#, fuzzy
msgid "do not restart the domain on the destination host"
msgstr "連接客座端主控台"

#: tools/virsh.c:3679
msgid "migration with non-shared storage with full disk copy"
msgstr ""

#: tools/virsh.c:3680
msgid ""
"migration with non-shared storage with incremental copy (same base image "
"shared between source and destination)"
msgstr ""

#: tools/virsh.c:3681
#, fuzzy
msgid "display the progress of migration"
msgstr "顯示系統版本的資訊。"

#: tools/virsh.c:3683
msgid ""
"connection URI of the destination host as seen from the client(normal "
"migration) or source(p2p migration)"
msgstr ""

#: tools/virsh.c:3684
msgid "migration URI, usually can be omitted"
msgstr ""

#: tools/virsh.c:3685
msgid "rename to new name during migration (if supported)"
msgstr ""

#: tools/virsh.c:3686
msgid "force guest to suspend if live migration exceeds timeout (in seconds)"
msgstr ""

#: tools/virsh.c:3726 tools/virsh.c:5532 tools/virsh.c:6339 tools/virsh.c:6351
#: tools/virsh.c:6685
#, fuzzy
msgid "missing argument"
msgstr "找不到 root 裝置的資訊"

#: tools/virsh.c:3757
msgid "migrate: Unexpected migrateuri for peer2peer/direct migration"
msgstr ""

#: tools/virsh.c:3846
msgid "migrate: Unexpected timeout for offline migration"
msgstr ""

#: tools/virsh.c:3851
msgid "migrate: Invalid timeout"
msgstr ""

#: tools/virsh.c:3857
msgid "migrate: Timeout is too big"
msgstr ""

#: tools/virsh.c:3953
msgid "set maximum tolerable downtime"
msgstr ""

#: tools/virsh.c:3954
msgid ""
"Set maximum tolerable downtime of a domain which is being live-migrated to "
"another host."
msgstr ""

#: tools/virsh.c:3960
msgid "maximum tolerable downtime (in milliseconds) for migration"
msgstr ""

#: tools/virsh.c:3979
msgid "migrate: Invalid downtime"
msgstr ""

#: tools/virsh.c:3997
msgid "autostart a network"
msgstr "自動啟動網路"

#: tools/virsh.c:3999
msgid "Configure a network to be automatically started at boot."
msgstr "將網路設定為開機時自動啟動。"

#: tools/virsh.c:4004 tools/virsh.c:4144 tools/virsh.c:4183 tools/virsh.c:4575
#: tools/virsh.c:10126
msgid "network name or uuid"
msgstr "網路名稱或 uuid"

#: tools/virsh.c:4026
#, fuzzy, c-format
msgid "failed to mark network %s as autostarted"
msgstr "無法%s將網路標記為%s自動啟動"

#: tools/virsh.c:4028
#, fuzzy, c-format
msgid "failed to unmark network %s as autostarted"
msgstr "無法%s將網路標記為%s自動啟動"

#: tools/virsh.c:4034
#, fuzzy, c-format
msgid "Network %s marked as autostarted\n"
msgstr "網路 %s %s標記為自動啟動\n"

#: tools/virsh.c:4036
#, fuzzy, c-format
msgid "Network %s unmarked as autostarted\n"
msgstr "網路 %s %s標記為自動啟動\n"

#: tools/virsh.c:4046
msgid "create a network from an XML file"
msgstr "從 XML 檔案建立網路"

#: tools/virsh.c:4047
msgid "Create a network."
msgstr "建立網路。"

#: tools/virsh.c:4052 tools/virsh.c:4098
msgid "file containing an XML network description"
msgstr "包含 XML 網路描述的檔案"

#: tools/virsh.c:4077
#, c-format
msgid "Network %s created from %s\n"
msgstr "網路 %s 建立自 %s\n"

#: tools/virsh.c:4081
#, c-format
msgid "Failed to create network from %s"
msgstr "無法從 %s 建立網路"

#: tools/virsh.c:4092
msgid "define (but don't start) a network from an XML file"
msgstr "從 XML 檔案定義（但不啟動）網路"

#: tools/virsh.c:4093
msgid "Define a network."
msgstr "定義網路。"

#: tools/virsh.c:4123
#, c-format
msgid "Network %s defined from %s\n"
msgstr "網路 %s 定義自 %s\n"

#: tools/virsh.c:4127
#, c-format
msgid "Failed to define network from %s"
msgstr "無法從 %s 定義網路"

#: tools/virsh.c:4138
msgid "destroy a network"
msgstr "刪除一個網路"

#: tools/virsh.c:4139
msgid "Destroy a given network."
msgstr "刪除給定的網路。"

#: tools/virsh.c:4162
#, c-format
msgid "Network %s destroyed\n"
msgstr "網路 %s 已經刪除\n"

#: tools/virsh.c:4164
#, c-format
msgid "Failed to destroy network %s"
msgstr "無法刪除網路 %s"

#: tools/virsh.c:4177
msgid "network information in XML"
msgstr "XML 格式的網路資訊"

#: tools/virsh.c:4178
#, fuzzy
msgid "Output the network information as an XML dump to stdout."
msgstr "將網路資訊以 XML 格式輸出到螢幕上。"

#: tools/virsh.c:4216
#, fuzzy
msgid "network information"
msgstr "XML 格式的網路資訊"

#: tools/virsh.c:4222 tools/virsh.c:4614
msgid "network name"
msgstr "網路名稱"

#: tools/virsh.c:4246 tools/virsh.c:5183 tools/virsh.c:8182
#, fuzzy
msgid "UUID"
msgstr "UUID："

#: tools/virsh.c:4250
#, fuzzy
msgid "Active:"
msgstr "啟用"

#: tools/virsh.c:4259 tools/virsh.c:4454 tools/virsh.c:4477 tools/virsh.c:6016
#: tools/virsh.c:6509
msgid "no autostart"
msgstr "不自動啟動"

#: tools/virsh.c:4265
msgid "Bridge:"
msgstr ""

#: tools/virsh.c:4275
#, fuzzy
msgid "edit XML configuration for a physical host interface"
msgstr "為非作用中的網路取消定義。"

#: tools/virsh.c:4276
#, fuzzy
msgid "Edit the XML configuration for a physical host interface."
msgstr "為非作用中的網路取消定義。"

#: tools/virsh.c:4281 tools/virsh.c:4824 tools/virsh.c:4914 tools/virsh.c:4952
#: tools/virsh.c:4990
msgid "interface name or MAC address"
msgstr ""

#: tools/virsh.c:4321
#, c-format
msgid "Interface %s XML configuration not changed.\n"
msgstr ""

#: tools/virsh.c:4337 tools/virsh.c:5275 tools/virsh.c:10084
msgid "ERROR: the XML configuration was changed by another user"
msgstr ""

#: tools/virsh.c:4347
#, fuzzy, c-format
msgid "Interface %s XML configuration edited.\n"
msgstr "無法讀取設定檔"

#: tools/virsh.c:4372
msgid "list networks"
msgstr "列出網路"

#: tools/virsh.c:4373
msgid "Returns list of networks."
msgstr "傳回網路清單。"

#: tools/virsh.c:4378
msgid "list inactive networks"
msgstr "列出非作用中的網路"

#: tools/virsh.c:4379
msgid "list inactive & active networks"
msgstr "列出作用中與非作用中的網路"

#: tools/virsh.c:4399 tools/virsh.c:4407
msgid "Failed to list active networks"
msgstr "無法列出運作中的網路"

#: tools/virsh.c:4418 tools/virsh.c:4428
msgid "Failed to list inactive networks"
msgstr "無法列出非作用中的網路"

#: tools/virsh.c:4438 tools/virsh.c:6161 tools/virsh.c:6190 tools/virsh.c:6249
msgid "Autostart"
msgstr "自動啟動"

#: tools/virsh.c:4460 tools/virsh.c:4726 tools/virsh.c:6129
msgid "active"
msgstr "啟用"

#: tools/virsh.c:4483 tools/virsh.c:4743 tools/virsh.c:6054 tools/virsh.c:6127
#: tools/virsh.c:6477
msgid "inactive"
msgstr "非啟用中"

#: tools/virsh.c:4499
msgid "convert a network UUID to network name"
msgstr "將網路 id 或 UUID 轉為網路名稱"

#: tools/virsh.c:4505
msgid "network uuid"
msgstr "網路 uuid"

#: tools/virsh.c:4530
msgid "start a (previously defined) inactive network"
msgstr "開啟（先前定義的）非作用中網路"

#: tools/virsh.c:4531
msgid "Start a network."
msgstr "啟動一個網路。"

#: tools/virsh.c:4536
msgid "name of the inactive network"
msgstr "非作用中網路的名稱"

#: tools/virsh.c:4553
#, c-format
msgid "Network %s started\n"
msgstr "網路 %s 已開啟\n"

#: tools/virsh.c:4556
#, c-format
msgid "Failed to start network %s"
msgstr "無法開啟網路 %s"

#: tools/virsh.c:4569
msgid "undefine an inactive network"
msgstr "取消定義非作用中的網路"

#: tools/virsh.c:4570
msgid "Undefine the configuration for an inactive network."
msgstr "為非作用中的網路取消定義。"

#: tools/virsh.c:4593
#, c-format
msgid "Network %s has been undefined\n"
msgstr "網路 %s 已經取消定義\n"

#: tools/virsh.c:4595
#, c-format
msgid "Failed to undefine network %s"
msgstr "無法為網路 %s 取消定義"

#: tools/virsh.c:4608
msgid "convert a network name to network UUID"
msgstr "將網路名稱轉為網路 UUID"

#: tools/virsh.c:4634
msgid "failed to get network UUID"
msgstr "無法取得網路 UUID"

#: tools/virsh.c:4646
msgid "list physical host interfaces"
msgstr ""

#: tools/virsh.c:4647
#, fuzzy
msgid "Returns list of physical host interfaces."
msgstr "傳回區域清單。"

#: tools/virsh.c:4652
#, fuzzy
msgid "list inactive interfaces"
msgstr "列出非作用中的網路"

#: tools/virsh.c:4653
#, fuzzy
msgid "list inactive & active interfaces"
msgstr "列出作用中與非作用中的網路"

#: tools/virsh.c:4672 tools/virsh.c:4680
#, fuzzy
msgid "Failed to list active interfaces"
msgstr "無法列出運作中的網路"

#: tools/virsh.c:4691 tools/virsh.c:4701
#, fuzzy
msgid "Failed to list inactive interfaces"
msgstr "無法列出非作用中的網路"

#: tools/virsh.c:4711
#, fuzzy
msgid "MAC Address"
msgstr "無效的參數，於 %s"

#: tools/virsh.c:4758
msgid "convert an interface MAC address to interface name"
msgstr ""

#: tools/virsh.c:4764
msgid "interface mac"
msgstr ""

#: tools/virsh.c:4788
msgid "convert an interface name to interface MAC address"
msgstr ""

#: tools/virsh.c:4794
#, fuzzy
msgid "interface name"
msgstr "網路名稱"

#: tools/virsh.c:4818
#, fuzzy
msgid "interface information in XML"
msgstr "XML 格式的網路資訊"

#: tools/virsh.c:4819
#, fuzzy
msgid ""
"Output the physical host interface information as an XML dump to stdout."
msgstr "將區域資訊以 XML 格式輸出到螢幕上。"

#: tools/virsh.c:4863
#, fuzzy
msgid "define (but don't start) a physical host interface from an XML file"
msgstr "從 XML 檔案定義（但不啟動）區域"

#: tools/virsh.c:4864
msgid "Define a physical host interface."
msgstr ""

#: tools/virsh.c:4869
#, fuzzy
msgid "file containing an XML interface description"
msgstr "包含 XML 網路描述的檔案"

#: tools/virsh.c:4894
#, fuzzy, c-format
msgid "Interface %s defined from %s\n"
msgstr "網路 %s 定義自 %s\n"

#: tools/virsh.c:4898
#, fuzzy, c-format
msgid "Failed to define interface from %s"
msgstr "無法從 %s 定義網路"

#: tools/virsh.c:4908
msgid "undefine a physical host interface (remove it from configuration)"
msgstr ""

#: tools/virsh.c:4909
#, fuzzy
msgid "undefine an interface."
msgstr "取消定義非作用中的區域"

#: tools/virsh.c:4932
#, fuzzy, c-format
msgid "Interface %s undefined\n"
msgstr "網路 %s 已經取消定義\n"

#: tools/virsh.c:4934
#, fuzzy, c-format
msgid "Failed to undefine interface %s"
msgstr "無法為網路 %s 取消定義"

#: tools/virsh.c:4946
msgid "start a physical host interface (enable it / \"if-up\")"
msgstr ""

#: tools/virsh.c:4947
msgid "start a physical host interface."
msgstr ""

#: tools/virsh.c:4970
#, fuzzy, c-format
msgid "Interface %s started\n"
msgstr "網路 %s 已開啟\n"

#: tools/virsh.c:4972
#, fuzzy, c-format
msgid "Failed to start interface %s"
msgstr "無法開啟網路 %s"

#: tools/virsh.c:4984
msgid "destroy a physical host interface (disable it / \"if-down\")"
msgstr ""

#: tools/virsh.c:4985
msgid "destroy a physical host interface."
msgstr ""

#: tools/virsh.c:5008
#, fuzzy, c-format
msgid "Interface %s destroyed\n"
msgstr "網路 %s 已經刪除\n"

#: tools/virsh.c:5010
#, fuzzy, c-format
msgid "Failed to destroy interface %s"
msgstr "無法刪除網路 %s"

#: tools/virsh.c:5023
#, fuzzy
msgid "define or update a network filter from an XML file"
msgstr "從 XML 檔案定義（但不啟動）網路"

#: tools/virsh.c:5024
msgid "Define a new network filter or update an existing one."
msgstr ""

#: tools/virsh.c:5029
#, fuzzy
msgid "file containing an XML network filter description"
msgstr "包含 XML 網路描述的檔案"

#: tools/virsh.c:5054
#, fuzzy, c-format
msgid "Network filter %s defined from %s\n"
msgstr "網路 %s 定義自 %s\n"

#: tools/virsh.c:5058
#, fuzzy, c-format
msgid "Failed to define network filter from %s"
msgstr "無法從 %s 定義網路"

#: tools/virsh.c:5069
#, fuzzy
msgid "undefine a network filter"
msgstr "未定義的網路名稱"

#: tools/virsh.c:5070
#, fuzzy
msgid "Undefine a given network filter."
msgstr "取消定義非作用中的網路"

#: tools/virsh.c:5075 tools/virsh.c:5114 tools/virsh.c:5220
#, fuzzy
msgid "network filter name or uuid"
msgstr "網路名稱或 uuid"

#: tools/virsh.c:5093
#, fuzzy, c-format
msgid "Network filter %s undefined\n"
msgstr "網路 %s 已經取消定義\n"

#: tools/virsh.c:5095
#, fuzzy, c-format
msgid "Failed to undefine network filter %s"
msgstr "無法為網路 %s 取消定義"

#: tools/virsh.c:5108
#, fuzzy
msgid "network filter information in XML"
msgstr "XML 格式的網路資訊"

#: tools/virsh.c:5109
#, fuzzy
msgid "Output the network filter information as an XML dump to stdout."
msgstr "將網路資訊以 XML 格式輸出到螢幕上。"

#: tools/virsh.c:5147
#, fuzzy
msgid "list network filters"
msgstr "列出網路"

#: tools/virsh.c:5148
#, fuzzy
msgid "Returns list of network filters."
msgstr "傳回網路清單。"

#: tools/virsh.c:5168 tools/virsh.c:5176
#, fuzzy
msgid "Failed to list network filters"
msgstr "無法開啟網路 %s"

#: tools/virsh.c:5214
#, fuzzy
msgid "edit XML configuration for a network filter"
msgstr "為非作用中的網路取消定義。"

#: tools/virsh.c:5215
#, fuzzy
msgid "Edit the XML configuration for a network filter."
msgstr "為非作用中的網路取消定義。"

#: tools/virsh.c:5259
#, c-format
msgid "Network filter %s XML configuration not changed.\n"
msgstr ""

#: tools/virsh.c:5285
#, fuzzy, c-format
msgid "Network filter %s XML configuration edited.\n"
msgstr "無法寫入設定檔"

#: tools/virsh.c:5312
#, fuzzy
msgid "autostart a pool"
msgstr "自動啟動一個區域"

#: tools/virsh.c:5314
#, fuzzy
msgid "Configure a pool to be automatically started at boot."
msgstr "將區域設定為開機時自動啟動。"

#: tools/virsh.c:5319 tools/virsh.c:5715 tools/virsh.c:5755 tools/virsh.c:5794
#: tools/virsh.c:5833 tools/virsh.c:5872 tools/virsh.c:6446 tools/virsh.c:6792
#: tools/virsh.c:7023 tools/virsh.c:7100 tools/virsh.c:7200 tools/virsh.c:7306
#: tools/virsh.c:7347 tools/virsh.c:7388 tools/virsh.c:7439 tools/virsh.c:7480
#: tools/virsh.c:7852 tools/virsh.c:7885 tools/virsh.c:10143
#, fuzzy
msgid "pool name or uuid"
msgstr "區域名稱或 uuid"

#: tools/virsh.c:5341
#, fuzzy, c-format
msgid "failed to mark pool %s as autostarted"
msgstr "無法%s將網路標記為%s自動啟動"

#: tools/virsh.c:5343
#, fuzzy, c-format
msgid "failed to unmark pool %s as autostarted"
msgstr "無法%s將網路標記為%s自動啟動"

#: tools/virsh.c:5349
#, fuzzy, c-format
msgid "Pool %s marked as autostarted\n"
msgstr "區域 %s %s已標記為自動啟動\n"

#: tools/virsh.c:5351
#, fuzzy, c-format
msgid "Pool %s unmarked as autostarted\n"
msgstr "區域 %s %s已標記為自動啟動\n"

#: tools/virsh.c:5361
#, fuzzy
msgid "create a pool from an XML file"
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:5362 tools/virsh.c:5580
#, fuzzy
msgid "Create a pool."
msgstr "建立區域。"

#: tools/virsh.c:5368 tools/virsh.c:5627
#, fuzzy
msgid "file containing an XML pool description"
msgstr "包含 XML 區域描述的檔案"

#: tools/virsh.c:5393
#, fuzzy, c-format
msgid "Pool %s created from %s\n"
msgstr "區域 %s 建立自 %s\n"

#: tools/virsh.c:5397
#, fuzzy, c-format
msgid "Failed to create pool from %s"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:5408
#, fuzzy
msgid "create a device defined by an XML file on the node"
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:5410
msgid ""
"Create a device on the node.  Note that this command creates devices on the "
"physical host that can then be assigned to a virtual machine."
msgstr ""

#: tools/virsh.c:5418
#, fuzzy
msgid "file containing an XML description of the device"
msgstr "包含 XML 區域描述的檔案"

#: tools/virsh.c:5443
#, fuzzy, c-format
msgid "Node device %s created from %s\n"
msgstr "區域 %s 建立自 %s\n"

#: tools/virsh.c:5447
#, fuzzy, c-format
msgid "Failed to create node device from %s"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:5459
msgid "destroy a device on the node"
msgstr ""

#: tools/virsh.c:5460
msgid ""
"Destroy a device on the node.  Note that this command destroys devices on "
"the physical host "
msgstr ""

#: tools/virsh.c:5467
#, fuzzy
msgid "name of the device to be destroyed"
msgstr "非作用中網路的名稱"

#: tools/virsh.c:5488
#, c-format
msgid "Destroyed node device '%s'\n"
msgstr ""

#: tools/virsh.c:5490
#, fuzzy, c-format
msgid "Failed to destroy node device '%s'"
msgstr "無法刪除區域 %s"

#: tools/virsh.c:5503
#, fuzzy
msgid "name of the pool"
msgstr "非作用中區域的名稱"

#: tools/virsh.c:5504
msgid "print XML document, but don't define/create"
msgstr ""

#: tools/virsh.c:5505
msgid "type of the pool"
msgstr ""

#: tools/virsh.c:5506
msgid "source-host for underlying storage"
msgstr ""

#: tools/virsh.c:5507
msgid "source path for underlying storage"
msgstr ""

#: tools/virsh.c:5508
msgid "source device for underlying storage"
msgstr ""

#: tools/virsh.c:5509
msgid "source name for underlying storage"
msgstr ""

#: tools/virsh.c:5510
msgid "target for underlying storage"
msgstr ""

#: tools/virsh.c:5511
msgid "format for underlying storage"
msgstr ""

#: tools/virsh.c:5562 tools/virsh.c:6758 tools/virsh.c:7060 tools/virsh.c:9133
#: tools/virsh.c:9409 tools/virsh.c:10005
#, fuzzy
msgid "Failed to allocate XML buffer"
msgstr "無法分配節點"

#: tools/virsh.c:5579
#, fuzzy
msgid "create a pool from a set of args"
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:5606
#, fuzzy, c-format
msgid "Pool %s created\n"
msgstr "區域 %s 建立自 %s\n"

#: tools/virsh.c:5609
#, fuzzy, c-format
msgid "Failed to create pool %s"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:5621
#, fuzzy
msgid "define (but don't start) a pool from an XML file"
msgstr "從 XML 檔案定義（但不啟動）區域"

#: tools/virsh.c:5622 tools/virsh.c:5668
#, fuzzy
msgid "Define a pool."
msgstr "定義區域。"

#: tools/virsh.c:5652
#, fuzzy, c-format
msgid "Pool %s defined from %s\n"
msgstr "區域 %s 定義自 %s\n"

#: tools/virsh.c:5656
#, fuzzy, c-format
msgid "Failed to define pool from %s"
msgstr "無法從 %s 定義區域"

#: tools/virsh.c:5667
msgid "define a pool from a set of args"
msgstr ""

#: tools/virsh.c:5694
#, fuzzy, c-format
msgid "Pool %s defined\n"
msgstr "區域 %s 定義自 %s\n"

#: tools/virsh.c:5697
#, fuzzy, c-format
msgid "Failed to define pool %s"
msgstr "無法為區域 %s 取消定義"

#: tools/virsh.c:5709
msgid "build a pool"
msgstr ""

#: tools/virsh.c:5710
msgid "Build a given pool."
msgstr ""

#: tools/virsh.c:5733
#, c-format
msgid "Pool %s built\n"
msgstr ""

#: tools/virsh.c:5735
#, fuzzy, c-format
msgid "Failed to build pool %s"
msgstr "無法暫停區域 %s"

#: tools/virsh.c:5749
#, fuzzy
msgid "destroy a pool"
msgstr "刪除一個區域"

#: tools/virsh.c:5750
#, fuzzy
msgid "Destroy a given pool."
msgstr "刪除給定的區域。"

#: tools/virsh.c:5773
#, fuzzy, c-format
msgid "Pool %s destroyed\n"
msgstr "區域 %s 已經刪除\n"

#: tools/virsh.c:5775
#, fuzzy, c-format
msgid "Failed to destroy pool %s"
msgstr "無法刪除區域 %s"

#: tools/virsh.c:5788
msgid "delete a pool"
msgstr ""

#: tools/virsh.c:5789
#, fuzzy
msgid "Delete a given pool."
msgstr "刪除給定的區域。"

#: tools/virsh.c:5812
#, fuzzy, c-format
msgid "Pool %s deleted\n"
msgstr "區域 %s 已經刪除\n"

#: tools/virsh.c:5814
#, fuzzy, c-format
msgid "Failed to delete pool %s"
msgstr "無法刪除區域 %s"

#: tools/virsh.c:5827
msgid "refresh a pool"
msgstr ""

#: tools/virsh.c:5828
msgid "Refresh a given pool."
msgstr ""

#: tools/virsh.c:5851
#, fuzzy, c-format
msgid "Pool %s refreshed\n"
msgstr "區域 %s 已經繼續執行\n"

#: tools/virsh.c:5853
#, fuzzy, c-format
msgid "Failed to refresh pool %s"
msgstr "無法繼續區域 %s"

#: tools/virsh.c:5866
#, fuzzy
msgid "pool information in XML"
msgstr "XML 格式的區域資訊"

#: tools/virsh.c:5867
#, fuzzy
msgid "Output the pool information as an XML dump to stdout."
msgstr "將區域資訊以 XML 格式輸出到螢幕上。"

#: tools/virsh.c:5906
#, fuzzy
msgid "list pools"
msgstr "列出區域"

#: tools/virsh.c:5907
#, fuzzy
msgid "Returns list of pools."
msgstr "傳回區域清單。"

#: tools/virsh.c:5912
#, fuzzy
msgid "list inactive pools"
msgstr "列出非作用中的區域"

#: tools/virsh.c:5913
#, fuzzy
msgid "list inactive & active pools"
msgstr "列出作用中與非作用中的區域"

#: tools/virsh.c:5914
msgid "display extended details for pools"
msgstr ""

#: tools/virsh.c:5954 tools/virsh.c:5980
#, fuzzy
msgid "Failed to list active pools"
msgstr "無法列出運作中的區域"

#: tools/virsh.c:5963 tools/virsh.c:5992
#, fuzzy
msgid "Failed to list inactive pools"
msgstr "無法列出非作用中的區域"

#: tools/virsh.c:6040
#, fuzzy
msgid "Could not retrieve pool information"
msgstr "無法解析 Xend 的區域資訊"

#: tools/virsh.c:6057 tools/virsh.c:6481
msgid "building"
msgstr ""

#: tools/virsh.c:6060 tools/virsh.c:6485 tools/virsh.c:11950
#: tools/virsh.c:11976
msgid "running"
msgstr "執行中"

#: tools/virsh.c:6063 tools/virsh.c:6489
msgid "degraded"
msgstr ""

#: tools/virsh.c:6066 tools/virsh.c:6493
#, fuzzy
msgid "inaccessible"
msgstr "非啟用中"

#: tools/virsh.c:6104 tools/virsh.c:6105 tools/virsh.c:6106
msgid "-"
msgstr ""

#: tools/virsh.c:6195 tools/virsh.c:6250
msgid "Persistent"
msgstr ""

#: tools/virsh.c:6200 tools/virsh.c:6250 tools/virsh.c:7664
msgid "Capacity"
msgstr ""

#: tools/virsh.c:6205 tools/virsh.c:6250 tools/virsh.c:7669 tools/virsh.c:7695
#, fuzzy
msgid "Allocation"
msgstr "分配區域"

#: tools/virsh.c:6210 tools/virsh.c:6250
msgid "Available"
msgstr ""

#: tools/virsh.c:6280 tools/virsh.c:6367 tools/virsh.c:7722 tools/virsh.c:9740
#: tools/virsh.c:10214 tools/virsh.c:12024 tools/virsh.c:12365
#: tools/virsh.c:12371
#, fuzzy
msgid "Out of memory"
msgstr "記憶體不足"

#: tools/virsh.c:6284 tools/virsh.c:7726
#, c-format
msgid "virAsprintf failed (errno %d)"
msgstr ""

#: tools/virsh.c:6314
msgid "find potential storage pool sources"
msgstr ""

#: tools/virsh.c:6315 tools/virsh.c:6391
msgid "Returns XML <sources> document."
msgstr ""

#: tools/virsh.c:6321
msgid "type of storage pool sources to find"
msgstr ""

#: tools/virsh.c:6322
msgid "optional host to query"
msgstr ""

#: tools/virsh.c:6323
msgid "optional port to query"
msgstr ""

#: tools/virsh.c:6324
msgid "optional initiator IQN to use for query"
msgstr ""

#: tools/virsh.c:6376 tools/virsh.c:6426
#, fuzzy, c-format
msgid "Failed to find any %s pool sources"
msgstr "無法將區域 %s 存至 %s"

#: tools/virsh.c:6390
msgid "discover potential storage pool sources"
msgstr ""

#: tools/virsh.c:6397
msgid "type of storage pool sources to discover"
msgstr ""

#: tools/virsh.c:6399
msgid "optional file of source xml to query for pools"
msgstr ""

#: tools/virsh.c:6413 tools/virsh.c:9207 tools/virsh.c:9359
#: tools/virsh.c:11539
#, fuzzy
msgid "missing option"
msgstr "找不到 \""

#: tools/virsh.c:6440
#, fuzzy
msgid "storage pool information"
msgstr "節點資訊"

#: tools/virsh.c:6441
#, fuzzy
msgid "Returns basic information about the storage pool."
msgstr "傳回節點的基本資訊。"

#: tools/virsh.c:6522
msgid "Available:"
msgstr ""

#: tools/virsh.c:6537
#, fuzzy
msgid "convert a pool UUID to pool name"
msgstr "將網路 id 或 UUID 轉為網路名稱"

#: tools/virsh.c:6543
#, fuzzy
msgid "pool uuid"
msgstr "區域的 uuid"

#: tools/virsh.c:6568
#, fuzzy
msgid "start a (previously defined) inactive pool"
msgstr "開啟（先前定義的）非作用中區域"

#: tools/virsh.c:6569
#, fuzzy
msgid "Start a pool."
msgstr "開啟一個區域。"

#: tools/virsh.c:6574
#, fuzzy
msgid "name of the inactive pool"
msgstr "非作用中區域的名稱"

#: tools/virsh.c:6591
#, fuzzy, c-format
msgid "Pool %s started\n"
msgstr "區域 %s 已開啟\n"

#: tools/virsh.c:6594
#, fuzzy, c-format
msgid "Failed to start pool %s"
msgstr "無法開啟區域 %s"

#: tools/virsh.c:6607
#, fuzzy
msgid "create a volume from a set of args"
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:6608 tools/virsh.c:6863
#, fuzzy
msgid "Create a vol."
msgstr "建立區域。"

#: tools/virsh.c:6613 tools/virsh.c:6831 tools/virsh.c:6868 tools/virsh.c:6925
#, fuzzy
msgid "pool name"
msgstr "區域名稱"

#: tools/virsh.c:6614
#, fuzzy
msgid "name of the volume"
msgstr "非作用中區域的名稱"

#: tools/virsh.c:6615
msgid "size of the vol with optional k,M,G,T suffix"
msgstr ""

#: tools/virsh.c:6616
msgid "initial allocation size with optional k,M,G,T suffix"
msgstr ""

#: tools/virsh.c:6617
msgid "file format type raw,bochs,qcow,qcow2,vmdk"
msgstr ""

#: tools/virsh.c:6618
msgid "the backing volume if taking a snapshot"
msgstr ""

#: tools/virsh.c:6619
msgid "format of backing volume if taking a snapshot"
msgstr ""

#: tools/virsh.c:6675 tools/virsh.c:6679
#, c-format
msgid "Malformed size %s"
msgstr ""

#: tools/virsh.c:6733 tools/virsh.c:11572
#, fuzzy, c-format
msgid "failed to get vol '%s'"
msgstr "無法取得區域「%s」"

#: tools/virsh.c:6767
#, fuzzy, c-format
msgid "Vol %s created\n"
msgstr "區域 %s 建立自 %s\n"

#: tools/virsh.c:6771
#, fuzzy, c-format
msgid "Failed to create vol %s"
msgstr "無法讀取插槽 %d\n"

#: tools/virsh.c:6786
#, fuzzy
msgid "undefine an inactive pool"
msgstr "取消定義非作用中的區域"

#: tools/virsh.c:6787
#, fuzzy
msgid "Undefine the configuration for an inactive pool."
msgstr "為非作用中的區域取消定義。"

#: tools/virsh.c:6810
#, fuzzy, c-format
msgid "Pool %s has been undefined\n"
msgstr "區域 %s 已經取消定義\n"

#: tools/virsh.c:6812
#, fuzzy, c-format
msgid "Failed to undefine pool %s"
msgstr "無法為區域 %s 取消定義"

#: tools/virsh.c:6825
#, fuzzy
msgid "convert a pool name to pool UUID"
msgstr "將網路名稱轉為網路 UUID"

#: tools/virsh.c:6851
#, fuzzy
msgid "failed to get pool UUID"
msgstr "無法取得區域 UUID"

#: tools/virsh.c:6862
#, fuzzy
msgid "create a vol from an XML file"
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:6869 tools/virsh.c:6926
#, fuzzy
msgid "file containing an XML vol description"
msgstr "包含 XML 區域描述的檔案"

#: tools/virsh.c:6905
#, fuzzy, c-format
msgid "Vol %s created from %s\n"
msgstr "區域 %s 建立自 %s\n"

#: tools/virsh.c:6909 tools/virsh.c:6965
#, fuzzy, c-format
msgid "Failed to create vol from %s"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:6919
msgid "create a vol, using another volume as input"
msgstr ""

#: tools/virsh.c:6920
#, fuzzy
msgid "Create a vol from an existing volume."
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:6927
msgid "pool name or uuid of the input volume's pool"
msgstr ""

#: tools/virsh.c:6928
msgid "input vol name or key"
msgstr ""

#: tools/virsh.c:6962
#, fuzzy, c-format
msgid "Vol %s created from input vol %s\n"
msgstr "區域 %s 建立自 %s\n"

#: tools/virsh.c:7017
msgid "clone a volume."
msgstr ""

#: tools/virsh.c:7018
msgid "Clone an existing volume."
msgstr ""

#: tools/virsh.c:7024
msgid "orig vol name or key"
msgstr ""

#: tools/virsh.c:7025
#, fuzzy
msgid "clone name"
msgstr "區域名稱"

#: tools/virsh.c:7047 tools/virsh.c:7820
#, fuzzy
msgid "failed to get parent pool"
msgstr "無法開啟檔案"

#: tools/virsh.c:7067
#, fuzzy, c-format
msgid "Vol %s cloned from %s\n"
msgstr "區域 %s 建立自 %s\n"

#: tools/virsh.c:7070
#, fuzzy, c-format
msgid "Failed to clone vol from %s"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:7094
msgid "upload a file into a volume"
msgstr ""

#: tools/virsh.c:7095
msgid "Upload a file into a volume"
msgstr ""

#: tools/virsh.c:7101 tools/virsh.c:7201 tools/virsh.c:7307 tools/virsh.c:7348
#: tools/virsh.c:7389 tools/virsh.c:7440
msgid "vol name, key or path"
msgstr ""

#: tools/virsh.c:7102 tools/virsh.c:7202 tools/virsh.c:7413 tools/virsh.c:7568
msgid "file"
msgstr ""

#: tools/virsh.c:7103
msgid "volume offset to upload to"
msgstr ""

#: tools/virsh.c:7104
msgid "amount of data to upload"
msgstr ""

#: tools/virsh.c:7132 tools/virsh.c:7137 tools/virsh.c:7234 tools/virsh.c:7239
#, fuzzy
msgid "Unable to parse integer"
msgstr "無法開啟檔案"

#: tools/virsh.c:7146 tools/virsh.c:7247
msgid "file must not be empty"
msgstr ""

#: tools/virsh.c:7157
#, fuzzy, c-format
msgid "cannot upload to volume %s"
msgstr "無法連上 %s"

#: tools/virsh.c:7162
#, fuzzy, c-format
msgid "cannot send data to volume %s"
msgstr "未知的指令：「%s」"

#: tools/virsh.c:7167 tools/virsh.c:7272
#, fuzzy, c-format
msgid "cannot close file %s"
msgstr "無法連上 %s"

#: tools/virsh.c:7173 tools/virsh.c:7278
#, fuzzy, c-format
msgid "cannot close volume %s"
msgstr "無法連上 %s"

#: tools/virsh.c:7194 tools/virsh.c:7195
#, fuzzy
msgid "Download a volume to a file"
msgstr "將區域狀態存至檔案"

#: tools/virsh.c:7203
msgid "volume offset to download from"
msgstr ""

#: tools/virsh.c:7204
msgid "amount of data to download"
msgstr ""

#: tools/virsh.c:7255
#, fuzzy, c-format
msgid "cannot create %s"
msgstr "無狀態"

#: tools/virsh.c:7262
#, fuzzy, c-format
msgid "cannot download from volume %s"
msgstr "區域 %s 建立自 %s\n"

#: tools/virsh.c:7267
#, fuzzy, c-format
msgid "cannot receive data from volume %s"
msgstr "區域 %s 建立自 %s\n"

#: tools/virsh.c:7300
msgid "delete a vol"
msgstr ""

#: tools/virsh.c:7301
#, fuzzy
msgid "Delete a given vol."
msgstr "刪除給定的區域。"

#: tools/virsh.c:7326
#, fuzzy, c-format
msgid "Vol %s deleted\n"
msgstr "區域 %s 已經刪除\n"

#: tools/virsh.c:7328
#, fuzzy, c-format
msgid "Failed to delete vol %s"
msgstr "無法刪除區域 %s"

#: tools/virsh.c:7341
msgid "wipe a vol"
msgstr ""

#: tools/virsh.c:7342
msgid "Ensure data previously on a volume is not accessible to future reads"
msgstr ""

#: tools/virsh.c:7367
#, c-format
msgid "Vol %s wiped\n"
msgstr ""

#: tools/virsh.c:7369
#, fuzzy, c-format
msgid "Failed to wipe vol %s"
msgstr "無法暫停區域 %s"

#: tools/virsh.c:7382
#, fuzzy
msgid "storage vol information"
msgstr "節點資訊"

#: tools/virsh.c:7383
#, fuzzy
msgid "Returns basic information about the storage vol."
msgstr "傳回節點的基本資訊。"

#: tools/virsh.c:7411
#, fuzzy
msgid "Type:"
msgstr "作業系統類型："

#: tools/virsh.c:7413 tools/virsh.c:7570
#, fuzzy
msgid "block"
msgstr "以組絕"

#: tools/virsh.c:7433
#, fuzzy
msgid "vol information in XML"
msgstr "XML 格式的區域資訊"

#: tools/virsh.c:7434
#, fuzzy
msgid "Output the vol information as an XML dump to stdout."
msgstr "將區域資訊以 XML 格式輸出到螢幕上。"

#: tools/virsh.c:7474
#, fuzzy
msgid "list vols"
msgstr "列出區域"

#: tools/virsh.c:7475
#, fuzzy
msgid "Returns list of vols by pool."
msgstr "傳回區域清單。"

#: tools/virsh.c:7481
msgid "display extended details for volumes"
msgstr ""

#: tools/virsh.c:7521
#, fuzzy
msgid "Failed to list storage volumes"
msgstr "無法列出運作中的區域"

#: tools/virsh.c:7531
#, fuzzy
msgid "Failed to list active vols"
msgstr "無法列出運作中的區域"

#: tools/virsh.c:7634 tools/virsh.c:7654 tools/virsh.c:7694
msgid "Path"
msgstr ""

#: tools/virsh.c:7659 tools/virsh.c:7694
#, fuzzy
msgid "Type"
msgstr "作業系統類型："

#: tools/virsh.c:7757
msgid "returns the volume name for a given volume key or path"
msgstr ""

#: tools/virsh.c:7763 tools/virsh.c:7796
msgid "volume key or path"
msgstr ""

#: tools/virsh.c:7789
msgid "returns the storage pool for a given volume key or path"
msgstr ""

#: tools/virsh.c:7795
msgid "return the pool uuid rather than pool name"
msgstr ""

#: tools/virsh.c:7846
msgid "returns the volume key for a given volume name or path"
msgstr ""

#: tools/virsh.c:7853
msgid "volume name or path"
msgstr ""

#: tools/virsh.c:7879
msgid "returns the volume path for a given volume name or key"
msgstr ""

#: tools/virsh.c:7886
msgid "volume name or key"
msgstr ""

#: tools/virsh.c:7913
#, fuzzy
msgid "define or modify a secret from an XML file"
msgstr "從 XML 檔案定義（但不啟動）網路"

#: tools/virsh.c:7914
msgid "Define or modify a secret."
msgstr ""

#: tools/virsh.c:7919
msgid "file containing secret attributes in XML"
msgstr ""

#: tools/virsh.c:7944
#, fuzzy, c-format
msgid "Failed to set attributes from %s"
msgstr "無法開啟區域 %s"

#: tools/virsh.c:7948
#, fuzzy
msgid "Failed to get UUID of created secret"
msgstr "無法讀取插槽 %d\n"

#: tools/virsh.c:7952
#, fuzzy, c-format
msgid "Secret %s created\n"
msgstr "網路 %s 建立自 %s\n"

#: tools/virsh.c:7961
msgid "secret attributes in XML"
msgstr ""

#: tools/virsh.c:7962
#, fuzzy
msgid "Output attributes of a secret as an XML dump to stdout."
msgstr "將區域資訊以 XML 格式輸出到螢幕上。"

#: tools/virsh.c:7967 tools/virsh.c:8007 tools/virsh.c:8066 tools/virsh.c:8118
msgid "secret UUID"
msgstr ""

#: tools/virsh.c:8001
msgid "set a secret value"
msgstr ""

#: tools/virsh.c:8002
msgid "Set a secret value."
msgstr ""

#: tools/virsh.c:8008
msgid "base64-encoded secret value"
msgstr ""

#: tools/virsh.c:8032
#, fuzzy
msgid "Invalid base64 data"
msgstr "記憶體大小 %d 不是有效的數值"

#: tools/virsh.c:8036 tools/virsh.c:8095 tools/virsh.c:9268 tools/virsh.c:9527
#, fuzzy
msgid "Failed to allocate memory"
msgstr "無法分配節點"

#: tools/virsh.c:8045
#, fuzzy
msgid "Failed to set secret value"
msgstr "無法關閉插槽 %d\n"

#: tools/virsh.c:8048
msgid "Secret value set\n"
msgstr ""

#: tools/virsh.c:8060
msgid "Output a secret value"
msgstr ""

#: tools/virsh.c:8061
msgid "Output a secret value to stdout."
msgstr ""

#: tools/virsh.c:8112
#, fuzzy
msgid "undefine a secret"
msgstr "取消定義非作用中的網路"

#: tools/virsh.c:8113
#, fuzzy
msgid "Undefine a secret."
msgstr "定義網路。"

#: tools/virsh.c:8137
#, fuzzy, c-format
msgid "Failed to delete secret %s"
msgstr "無法關閉插槽 %d\n"

#: tools/virsh.c:8140
#, fuzzy, c-format
msgid "Secret %s deleted\n"
msgstr "網路 %s 已經刪除\n"

#: tools/virsh.c:8152
#, fuzzy
msgid "list secrets"
msgstr "列出網路"

#: tools/virsh.c:8153
#, fuzzy
msgid "Returns a list of secrets"
msgstr "傳回網路清單。"

#: tools/virsh.c:8168 tools/virsh.c:8175
#, fuzzy
msgid "Failed to list secrets"
msgstr "無法列出運作中的網路"

#: tools/virsh.c:8182
msgid "Usage"
msgstr ""

#: tools/virsh.c:8196
msgid "Volume"
msgstr ""

#: tools/virsh.c:8206
#, fuzzy
msgid "Unused"
msgstr "已暫停"

#: tools/virsh.c:8220
msgid "show version"
msgstr "顯示版本"

#: tools/virsh.c:8221
msgid "Display the system version information."
msgstr "顯示系統版本的資訊。"

#: tools/virsh.c:8244
msgid "failed to get hypervisor type"
msgstr "無法取得 hypervisor 類型"

#: tools/virsh.c:8253
#, c-format
msgid "Compiled against library: libvir %d.%d.%d\n"
msgstr "用此函式庫來編譯：libvir %d.%d.%d\n"

#: tools/virsh.c:8258
msgid "failed to get the library version"
msgstr "無法取得函式庫的版本"

#: tools/virsh.c:8265
#, c-format
msgid "Using library: libvir %d.%d.%d\n"
msgstr "使用函式庫：libvir %d.%d.%d\n"

#: tools/virsh.c:8272
#, c-format
msgid "Using API: %s %d.%d.%d\n"
msgstr "使用 API：%s %d.%d.%d\n"

#: tools/virsh.c:8277
msgid "failed to get the hypervisor version"
msgstr "無法取得 hypervisor 的版本"

#: tools/virsh.c:8282
#, c-format
msgid "Cannot extract running %s hypervisor version\n"
msgstr "無法解開執行中 %s hypervisor 的版本\n"

#: tools/virsh.c:8289
#, c-format
msgid "Running hypervisor: %s %d.%d.%d\n"
msgstr "執行 hypervisor：%s %d.%d.%d\n"

#: tools/virsh.c:8299
msgid "enumerate devices on this host"
msgstr ""

#: tools/virsh.c:8305
#, fuzzy
msgid "list devices in a tree"
msgstr "找不到裝置的資訊"

#: tools/virsh.c:8306
#, fuzzy
msgid "capability name"
msgstr "能力"

#: tools/virsh.c:8406
#, fuzzy
msgid "Failed to count node devices"
msgstr "無法連上 hypervisor"

#: tools/virsh.c:8416
#, fuzzy
msgid "Failed to list node devices"
msgstr "無法列出非作用中的區域"

#: tools/virsh.c:8466
msgid "node device details in XML"
msgstr ""

#: tools/virsh.c:8467
#, fuzzy
msgid "Output the node device details as an XML dump to stdout."
msgstr "將網路資訊以 XML 格式輸出到螢幕上。"

#: tools/virsh.c:8473 tools/virsh.c:8516 tools/virsh.c:8557 tools/virsh.c:8598
msgid "device key"
msgstr ""

#: tools/virsh.c:8489 tools/virsh.c:8532 tools/virsh.c:8573 tools/virsh.c:8614
msgid "Could not find matching device"
msgstr ""

#: tools/virsh.c:8509
#, fuzzy
msgid "dettach node device from its device driver"
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:8510
msgid ""
"Dettach node device from its device driver before assigning to a domain."
msgstr ""

#: tools/virsh.c:8537
#, fuzzy, c-format
msgid "Device %s dettached\n"
msgstr "區域 %s 已經刪除\n"

#: tools/virsh.c:8539
#, fuzzy, c-format
msgid "Failed to dettach device %s"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:8550
msgid "reattach node device to its device driver"
msgstr ""

#: tools/virsh.c:8551
msgid "Reattach node device to its device driver once released by the domain."
msgstr ""

#: tools/virsh.c:8578
#, c-format
msgid "Device %s re-attached\n"
msgstr ""

#: tools/virsh.c:8580
#, fuzzy, c-format
msgid "Failed to re-attach device %s"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:8591
msgid "reset node device"
msgstr ""

#: tools/virsh.c:8592
#, fuzzy
msgid "Reset node device before or after assigning to a domain."
msgstr "傳回執行中區域的狀態"

#: tools/virsh.c:8619
#, fuzzy, c-format
msgid "Device %s reset\n"
msgstr "區域 %s 已經繼續執行\n"

#: tools/virsh.c:8621
#, fuzzy, c-format
msgid "Failed to reset device %s"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:8632
#, fuzzy
msgid "print the hypervisor hostname"
msgstr "無法取得 hypervisor 類型"

#: tools/virsh.c:8647
#, fuzzy
msgid "failed to get hostname"
msgstr "無法取得 hypervisor 類型"

#: tools/virsh.c:8661
#, fuzzy
msgid "print the hypervisor canonical URI"
msgstr "hypervisor 連線的 URI"

#: tools/virsh.c:8676
#, fuzzy
msgid "failed to get URI"
msgstr "無法取得區域 UUID"

#: tools/virsh.c:8690
#, fuzzy
msgid "print the hypervisor sysinfo"
msgstr "無法取得 hypervisor 類型"

#: tools/virsh.c:8692
msgid "output an XML string for the hypervisor sysinfo, if available"
msgstr ""

#: tools/virsh.c:8706
#, fuzzy
msgid "failed to get sysinfo"
msgstr "無法取得 hypervisor 類型"

#: tools/virsh.c:8720
msgid "vnc display"
msgstr "vnc 顯示"

#: tools/virsh.c:8721
#, fuzzy
msgid "Output the IP address and port number for the VNC display."
msgstr "為 VNC 顯示模式輸出 IP 位址與連接埠號。"

#: tools/virsh.c:8795
msgid "tty console"
msgstr ""

#: tools/virsh.c:8796
msgid "Output the device for the TTY console."
msgstr ""

#: tools/virsh.c:8856
#, fuzzy
msgid "attach device from an XML file"
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:8857
#, fuzzy
msgid "Attach device from an XML <file>."
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:8863 tools/virsh.c:8928 tools/virsh.c:8993
msgid "XML file"
msgstr ""

#: tools/virsh.c:8864
msgid "persist device attachment"
msgstr ""

#: tools/virsh.c:8905
#, fuzzy, c-format
msgid "Failed to attach device from %s"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:8909
msgid "Device attached successfully\n"
msgstr ""

#: tools/virsh.c:8921
#, fuzzy
msgid "detach device from an XML file"
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:8922
#, fuzzy
msgid "Detach device from an XML <file>"
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:8929
msgid "persist device detachment"
msgstr ""

#: tools/virsh.c:8970
#, fuzzy, c-format
msgid "Failed to detach device from %s"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:8974
msgid "Device detached successfully\n"
msgstr ""

#: tools/virsh.c:8986
#, fuzzy
msgid "update device from an XML file"
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:8987
#, fuzzy
msgid "Update device from an XML <file>."
msgstr "從 XML 檔案建立區域"

#: tools/virsh.c:8994
msgid "persist device update"
msgstr ""

#: tools/virsh.c:8995
#, fuzzy
msgid "force device update"
msgstr "節點的區域清單"

#: tools/virsh.c:9040
#, fuzzy, c-format
msgid "Failed to update device from %s"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:9044
msgid "Device updated successfully\n"
msgstr ""

#: tools/virsh.c:9056
#, fuzzy
msgid "attach network interface"
msgstr "網路名稱"

#: tools/virsh.c:9057
msgid "Attach new network interface."
msgstr ""

#: tools/virsh.c:9063 tools/virsh.c:9176
#, fuzzy
msgid "network interface type"
msgstr "網路名稱"

#: tools/virsh.c:9064
#, fuzzy
msgid "source of network interface"
msgstr "未定義的網路名稱"

#: tools/virsh.c:9065
#, fuzzy
msgid "target network name"
msgstr "網路名稱"

#: tools/virsh.c:9066 tools/virsh.c:9177
#, fuzzy
msgid "MAC address"
msgstr "無效的參數，於 %s"

#: tools/virsh.c:9067
msgid "script used to bridge network interface"
msgstr ""

#: tools/virsh.c:9068
msgid "model type"
msgstr ""

#: tools/virsh.c:9069
#, fuzzy
msgid "persist interface attachment"
msgstr "網路名稱"

#: tools/virsh.c:9108
#, c-format
msgid "No support for %s in command 'attach-interface'"
msgstr ""

#: tools/virsh.c:9151
#, fuzzy
msgid "Failed to attach interface"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:9154
msgid "Interface attached successfully\n"
msgstr ""

#: tools/virsh.c:9169
#, fuzzy
msgid "detach network interface"
msgstr "網路名稱"

#: tools/virsh.c:9170
msgid "Detach network interface."
msgstr ""

#: tools/virsh.c:9178
#, fuzzy
msgid "persist interface detachment"
msgstr "網路名稱"

#: tools/virsh.c:9220 tools/virsh.c:9225
#, fuzzy
msgid "Failed to get interface information"
msgstr "無法取得節點資訊"

#: tools/virsh.c:9233
#, c-format
msgid "No found interface whose type is %s"
msgstr ""

#: tools/virsh.c:9238
#, c-format
msgid ""
"Domain has %d interfaces. Please specify which one to detach using --mac"
msgstr ""

#: tools/virsh.c:9262
#, c-format
msgid "No found interface whose MAC address is %s"
msgstr ""

#: tools/virsh.c:9273 tools/virsh.c:9532
#, fuzzy
msgid "Failed to create XML"
msgstr "無法讀取插槽 %d\n"

#: tools/virsh.c:9289
#, fuzzy
msgid "Failed to detach interface"
msgstr "無法取得節點資訊"

#: tools/virsh.c:9292
msgid "Interface detached successfully\n"
msgstr ""

#: tools/virsh.c:9312
msgid "attach disk device"
msgstr ""

#: tools/virsh.c:9313
msgid "Attach new disk device."
msgstr ""

#: tools/virsh.c:9319
msgid "source of disk device"
msgstr ""

#: tools/virsh.c:9320 tools/virsh.c:9452
msgid "target of disk device"
msgstr ""

#: tools/virsh.c:9321
msgid "driver of disk device"
msgstr ""

#: tools/virsh.c:9322
msgid "subdriver of disk device"
msgstr ""

#: tools/virsh.c:9323
msgid "target device type"
msgstr ""

#: tools/virsh.c:9324
msgid "mode of device reading and writing"
msgstr ""

#: tools/virsh.c:9325
msgid "persist disk attachment"
msgstr ""

#: tools/virsh.c:9326
msgid "type of source (block|file)"
msgstr ""

#: tools/virsh.c:9369
#, fuzzy, c-format
msgid "Unknown source type: '%s'"
msgstr "未知的作業系統類型 %s"

#: tools/virsh.c:9375
#, c-format
msgid "No support for %s in command 'attach-disk'"
msgstr ""

#: tools/virsh.c:9427
#, fuzzy
msgid "Failed to attach disk"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:9430
msgid "Disk attached successfully\n"
msgstr ""

#: tools/virsh.c:9445
msgid "detach disk device"
msgstr ""

#: tools/virsh.c:9446
msgid "Detach disk device."
msgstr ""

#: tools/virsh.c:9453
msgid "persist disk detachment"
msgstr ""

#: tools/virsh.c:9489 tools/virsh.c:9494 tools/virsh.c:9501
#, fuzzy
msgid "Failed to get disk information"
msgstr "無法取得節點資訊"

#: tools/virsh.c:9521
#, c-format
msgid "No found disk whose target is %s"
msgstr ""

#: tools/virsh.c:9548
#, fuzzy
msgid "Failed to detach disk"
msgstr "無法從 %s 建立區域"

#: tools/virsh.c:9551
msgid "Disk detached successfully\n"
msgstr ""

#: tools/virsh.c:9571
msgid "compare host CPU with a CPU described by an XML file"
msgstr ""

#: tools/virsh.c:9572
msgid "compare CPU with host CPU"
msgstr ""

#: tools/virsh.c:9577
#, fuzzy
msgid "file containing an XML CPU description"
msgstr "包含 XML 區域描述的檔案"

#: tools/virsh.c:9603
#, c-format
msgid "CPU described in %s is incompatible with host CPU\n"
msgstr ""

#: tools/virsh.c:9609
#, c-format
msgid "CPU described in %s is identical to host CPU\n"
msgstr ""

#: tools/virsh.c:9615
#, c-format
msgid "Host CPU is a superset of CPU described in %s\n"
msgstr ""

#: tools/virsh.c:9622
#, fuzzy, c-format
msgid "Failed to compare host CPU with %s"
msgstr "無法將區域 %s 的核心傾印至 %s"

#: tools/virsh.c:9633
msgid "compute baseline CPU"
msgstr ""

#: tools/virsh.c:9634
msgid "Compute baseline CPU for a set of given CPUs."
msgstr ""

#: tools/virsh.c:9639
#, fuzzy
msgid "file containing XML CPU descriptions"
msgstr "包含 XML 區域描述的檔案"

#: tools/virsh.c:9676
#, fuzzy, c-format
msgid "Failed to parse XML fragment %s"
msgstr "無法從 %s 回復區域"

#: tools/virsh.c:9713
#, c-format
msgid "No host CPU specified in '%s'"
msgstr ""

#: tools/virsh.c:9760
#, fuzzy, c-format
msgid "mkstemps: failed to create temporary file: %s"
msgstr "無法寫入設定檔"

#: tools/virsh.c:9767
#, fuzzy, c-format
msgid "write: %s: failed to write to temporary file: %s"
msgstr "無法寫入設定檔"

#: tools/virsh.c:9775
#, fuzzy, c-format
msgid "close: %s: failed to write or close temporary file: %s"
msgstr "無法寫入設定檔"

#: tools/virsh.c:9816
#, c-format
msgid ""
"%s: temporary filename contains shell meta or other unacceptable characters "
"(is $TMPDIR wrong?)"
msgstr ""

#: tools/virsh.c:9849
#, fuzzy, c-format
msgid "%s: failed to read temporary file: %s"
msgstr "無法寫入設定檔"

#: tools/virsh.c:9862
#, fuzzy
msgid "change the current directory"
msgstr "區域目前的記憶體"

#: tools/virsh.c:9863
#, fuzzy
msgid "Change the current directory."
msgstr "區域目前的記憶體"

#: tools/virsh.c:9868
msgid "directory to switch to (default: home or else root)"
msgstr ""

#: tools/virsh.c:9880
msgid "cd: command valid only in interactive mode"
msgstr ""

#: tools/virsh.c:9892
#, c-format
msgid "cd: %s: %s"
msgstr ""

#: tools/virsh.c:9907
#, fuzzy
msgid "print the current directory"
msgstr "區域目前的記憶體"

#: tools/virsh.c:9908
#, fuzzy
msgid "Print the current directory."
msgstr "區域目前的記憶體"

#: tools/virsh.c:9931
#, c-format
msgid "pwd: cannot get current directory: %s"
msgstr ""

#: tools/virsh.c:9934
#, c-format
msgid "%s\n"
msgstr ""

#: tools/virsh.c:9945
msgid "echo arguments"
msgstr ""

#: tools/virsh.c:9946
msgid "Echo back arguments, possibly with quoting."
msgstr ""

#: tools/virsh.c:9951
msgid "escape for shell use"
msgstr ""

#: tools/virsh.c:9952
msgid "escape for XML use"
msgstr ""

#: tools/virsh.c:9953
msgid "arguments to echo"
msgstr ""

#: tools/virsh.c:10019
#, fuzzy
msgid "edit XML configuration for a domain"
msgstr "為非作用中的區域取消定義。"

#: tools/virsh.c:10020
#, fuzzy
msgid "Edit the XML configuration for a domain."
msgstr "為非作用中的區域取消定義。"

#: tools/virsh.c:10068
#, c-format
msgid "Domain %s XML configuration not changed.\n"
msgstr ""

#: tools/virsh.c:10094
#, fuzzy, c-format
msgid "Domain %s XML configuration edited.\n"
msgstr "無法讀取設定檔"

#: tools/virsh.c:10120
#, fuzzy
msgid "edit XML configuration for a network"
msgstr "為非作用中的網路取消定義。"

#: tools/virsh.c:10121
#, fuzzy
msgid "Edit the XML configuration for a network."
msgstr "為非作用中的網路取消定義。"

#: tools/virsh.c:10137
#, fuzzy
msgid "edit XML configuration for a storage pool"
msgstr "為非作用中的區域取消定義。"

#: tools/virsh.c:10138
#, fuzzy
msgid "Edit the XML configuration for a storage pool."
msgstr "為非作用中的區域取消定義。"

#: tools/virsh.c:10154
msgid "quit this interactive terminal"
msgstr "離開這互動式的終端機"

#: tools/virsh.c:10170
#, fuzzy
msgid "Create a snapshot"
msgstr "建立網路。"

#: tools/virsh.c:10171
msgid "Snapshot create"
msgstr ""

#: tools/virsh.c:10177
#, fuzzy
msgid "domain snapshot XML"
msgstr "區域狀態"

#: tools/virsh.c:10238
msgid "Could not find 'name' element in domain snapshot XML"
msgstr ""

#: tools/virsh.c:10242
#, fuzzy, c-format
msgid "Domain snapshot %s created"
msgstr "區域 %s 建立自 %s\n"

#: tools/virsh.c:10244
#, c-format
msgid " from '%s'"
msgstr ""

#: tools/virsh.c:10268 tools/virsh.c:10269
msgid "Get the current snapshot"
msgstr ""

#: tools/virsh.c:10325
msgid "List snapshots for a domain"
msgstr ""

#: tools/virsh.c:10326
msgid "Snapshot List"
msgstr ""

#: tools/virsh.c:10365
#, fuzzy
msgid "Creation Time"
msgstr "操作失敗"

#: tools/virsh.c:10442
msgid "Dump XML for a domain snapshot"
msgstr ""

#: tools/virsh.c:10443
msgid "Snapshot Dump XML"
msgstr ""

#: tools/virsh.c:10449 tools/virsh.c:10505 tools/virsh.c:10556
msgid "snapshot name"
msgstr ""

#: tools/virsh.c:10498
msgid "Revert a domain to a snapshot"
msgstr ""

#: tools/virsh.c:10499
msgid "Revert domain to snapshot"
msgstr ""

#: tools/virsh.c:10549
#, fuzzy
msgid "Delete a domain snapshot"
msgstr "建立區域。"

#: tools/virsh.c:10550
msgid "Snapshot Delete"
msgstr ""

#: tools/virsh.c:10557
msgid "delete snapshot and all children"
msgstr ""

#: tools/virsh.c:10605 tools/virsh.c:10606
msgid "Qemu Monitor Command"
msgstr ""

#: tools/virsh.c:10612
#, fuzzy
msgid "command"
msgstr ""
"指令：\n"
"\n"

#: tools/virsh.c:10613
msgid "command is in human monitor protocol"
msgstr ""

#: tools/virsh.c:10634
#, fuzzy
msgid "missing monitor command"
msgstr "未知的指令：「%s」"

#: tools/virsh.c:10945
#, c-format
msgid "command '%s' requires <%s> option"
msgstr "「%s」指令需要 <%s> 選項"

#: tools/virsh.c:10946
#, c-format
msgid "command '%s' requires --%s option"
msgstr "「%s」指令需要 --%s 選項"

#: tools/virsh.c:10992
#, fuzzy, c-format
msgid "command group '%s' doesn't exist"
msgstr "「%s」指令不存在"

#: tools/virsh.c:11013
#, c-format
msgid "command '%s' doesn't exist"
msgstr "「%s」指令不存在"

#: tools/virsh.c:11020
msgid "  NAME\n"
msgstr "  名稱\n"

#: tools/virsh.c:11023
#, fuzzy
msgid ""
"\n"
"  SYNOPSIS\n"
msgstr ""
"\n"
"  選項\n"

#: tools/virsh.c:11036
#, fuzzy, c-format
msgid "[--%s <number>]"
msgstr "--%s <number>"

#: tools/virsh.c:11040
#, fuzzy, c-format
msgid "[--%s <string>]"
msgstr "--%s <string>"

#: tools/virsh.c:11047
#, fuzzy, c-format
msgid "[<string>]..."
msgstr "字串"

#: tools/virsh.c:11060
msgid ""
"\n"
"  DESCRIPTION\n"
msgstr ""
"\n"
"  描述\n"

#: tools/virsh.c:11066
msgid ""
"\n"
"  OPTIONS\n"
msgstr ""
"\n"
"  選項\n"

#: tools/virsh.c:11074
#, fuzzy, c-format
msgid "[--%s] <number>"
msgstr "--%s <number>"

#: tools/virsh.c:11075
#, c-format
msgid "--%s <number>"
msgstr "--%s <number>"

#: tools/virsh.c:11079
#, c-format
msgid "--%s <string>"
msgstr "--%s <string>"

#: tools/virsh.c:11082
#, fuzzy, c-format
msgid "[--%s] <string>"
msgstr "--%s <string>"

#: tools/virsh.c:11219
#, fuzzy, c-format
msgid "Missing required option '%s'"
msgstr "找不到 root 裝置的資訊，於 %s"

#: tools/virsh.c:11323
#, c-format
msgid "internal error: virsh %s: no %s VSH_OT_DATA option"
msgstr ""

#: tools/virsh.c:11370
#, c-format
msgid "failed to get domain '%s'"
msgstr "無法取得區域「%s」"

#: tools/virsh.c:11408
#, c-format
msgid "failed to get network '%s'"
msgstr "無法取得網路「%s」"

#: tools/virsh.c:11447
#, fuzzy, c-format
msgid "failed to get nwfilter '%s'"
msgstr "無法取得網路「%s」"

#: tools/virsh.c:11485
#, fuzzy, c-format
msgid "failed to get interface '%s'"
msgstr "無法取得網路「%s」"

#: tools/virsh.c:11520
#, fuzzy, c-format
msgid "failed to get pool '%s'"
msgstr "無法取得區域「%s」"

#: tools/virsh.c:11601
#, fuzzy, c-format
msgid "failed to get secret '%s'"
msgstr "無法取得網路「%s」"

#: tools/virsh.c:11647
#, c-format
msgid ""
"\n"
"(Time: %.3f ms)\n"
"\n"
msgstr ""
"\n"
"（時間：%.3f 毫秒)\n"
"\n"

#: tools/virsh.c:11715
#, c-format
msgid "unknown command: '%s'"
msgstr "未知的指令：「%s」"

#: tools/virsh.c:11730
#, c-format
msgid "command '%s' doesn't support option --%s"
msgstr "「%s」指令並不支援 --%s 選項"

#: tools/virsh.c:11747
#, c-format
msgid "expected syntax: --%s <%s>"
msgstr "語法：--%s <%s>"

#: tools/virsh.c:11750
msgid "number"
msgstr "數量"

#: tools/virsh.c:11750
msgid "string"
msgstr "字串"

#: tools/virsh.c:11756
#, fuzzy, c-format
msgid "invalid '=' after option --%s"
msgstr "無效的區域指標，於 %s"

#: tools/virsh.c:11769
#, c-format
msgid "unexpected data '%s'"
msgstr "無預期的資料「%s」"

#: tools/virsh.c:11791
msgid "optdata"
msgstr ""

#: tools/virsh.c:11791
msgid "bool"
msgstr ""

#: tools/virsh.c:11792
msgid "(none)"
msgstr ""

#: tools/virsh.c:11907
msgid "dangling \\"
msgstr ""

#: tools/virsh.c:11920
msgid "missing \""
msgstr "找不到 \""

#: tools/virsh.c:11952 tools/virsh.c:11974
msgid "idle"
msgstr ""

#: tools/virsh.c:11954
msgid "paused"
msgstr "已暫停"

#: tools/virsh.c:11956
msgid "in shutdown"
msgstr "關機中"

#: tools/virsh.c:11958
msgid "shut off"
msgstr "關機"

#: tools/virsh.c:11960
msgid "crashed"
msgstr "當機"

#: tools/virsh.c:11972
msgid "offline"
msgstr "離線"

#: tools/virsh.c:11990
msgid "no valid connection"
msgstr "沒有有效的連線"

#: tools/virsh.c:12046
msgid "error: "
msgstr "錯誤："

#: tools/virsh.c:12089
msgid "failed to connect to the hypervisor"
msgstr "無法連上 hypervisor"

#: tools/virsh.c:12118
#, fuzzy
msgid "failed to get the log file information"
msgstr "無法取得節點資訊"

#: tools/virsh.c:12123
msgid "the log path is not a file"
msgstr ""

#: tools/virsh.c:12131
msgid "failed to open the log file. check the log file path"
msgstr ""

#: tools/virsh.c:12200
#, fuzzy
msgid "failed to write the log file"
msgstr "無法寫入設定檔"

#: tools/virsh.c:12214
#, fuzzy, c-format
msgid "%s: failed to write log file: %s"
msgstr "無法寫入設定檔"

#: tools/virsh.c:12389
#, fuzzy, c-format
msgid "Failed to create '%s': %s"
msgstr "無法暫停區域 %s"

#: tools/virsh.c:12470
#, fuzzy, c-format
msgid ""
"\n"
"%s [options]... [<command_string>]\n"
"%s [options]... <command> [args...]\n"
"\n"
"  options:\n"
"    -c | --connect <uri>    hypervisor connection URI\n"
"    -r | --readonly         connect readonly\n"
"    -d | --debug <num>      debug level [0-5]\n"
"    -h | --help             this help\n"
"    -q | --quiet            quiet mode\n"
"    -t | --timing           print timing information\n"
"    -l | --log <file>       output logging to file\n"
"    -v | --version[=short]  program version\n"
"    -V | --version=long     version and full options\n"
"\n"
"  commands (non interactive mode):\n"
"\n"
msgstr ""
"\n"
"%s [選項] [命令]\n"
"\n"
"  選項：\n"
"    -c | --connect <uri>    hypervisor 連線的 URI\n"
"    -r | --readonly         用唯讀方式連線\n"
"    -d | --debug <num>      偵錯等級 [0-5]\n"
"    -h | --help             本求助畫面\n"
"    -q | --quiet            安靜模式\n"
"    -t | --timing           列印時間訊息\n"
"    -v | --version          程式版本\n"
"\n"
"  命令（非互動式模式）：\n"

#: tools/virsh.c:12485
#, c-format
msgid " %s (help keyword '%s')\n"
msgstr ""

#: tools/virsh.c:12495
#, fuzzy
msgid ""
"\n"
"  (specify help <group> for details about the commands in the group)\n"
msgstr ""
"\n"
"  （請使用 --help <指令> 以取得關於指令的詳細資料）\n"
"\n"

#: tools/virsh.c:12497
#, fuzzy
msgid ""
"\n"
"  (specify help <command> for details about the command)\n"
"\n"
msgstr ""
"\n"
"  （請使用 --help <指令> 以取得關於指令的詳細資料）\n"
"\n"

#: tools/virsh.c:12508
#, c-format
msgid "Virsh command line tool of libvirt %s\n"
msgstr ""

#: tools/virsh.c:12509
#, c-format
msgid ""
"See web site at %s\n"
"\n"
msgstr ""

#: tools/virsh.c:12511
msgid "Compiled with support for:\n"
msgstr ""

#: tools/virsh.c:12512
msgid " Hypervisors:"
msgstr ""

#: tools/virsh.c:12548
msgid " Networking:"
msgstr ""

#: tools/virsh.c:12575
msgid " Storage:"
msgstr ""

#: tools/virsh.c:12599
msgid " Miscellaneous:"
msgstr ""

#: tools/virsh.c:12652
msgid "option -d takes a numeric argument"
msgstr ""

#: tools/virsh.c:12684
#, c-format
msgid "unsupported option '-%c'. See --help."
msgstr "不支援的選項「-%c」。請參閱 --help。"

#: tools/virsh.c:12691
#, c-format
msgid "extra argument '%s'. See --help."
msgstr ""

#: tools/virsh.c:12762
#, c-format
msgid ""
"Welcome to %s, the virtualization interactive terminal.\n"
"\n"
msgstr ""
"歡迎使用 %s - 虛擬化的互動模式終端機。\n"
"\n"

#: tools/virsh.c:12765
msgid ""
"Type:  'help' for help with commands\n"
"       'quit' to quit\n"
"\n"
msgstr ""
"類型：  「help」以取得指令的求助畫面\n"
"        「quit」離開\n"
"\n"

#, fuzzy
#~ msgid "Non-blocking I/O is not supported on %s"
#~ msgstr "區域資訊"

#, fuzzy
#~ msgid "no domain named %s"
#~ msgstr "區域名稱"

#, fuzzy
#~ msgid "no domain with id %d"
#~ msgstr "節點的區域清單"

#, fuzzy
#~ msgid "domain is not paused"
#~ msgstr "區域 id 或 uuid"

#, fuzzy
#~ msgid "failed to create pipe to read '%s'"
#~ msgstr "無法取得網路「%s」"

#, fuzzy
#~ msgid "failed to fork child to read '%s'"
#~ msgstr "無法取得區域「%s」"

#, fuzzy
#~ msgid "cannot open '%s' as uid %d"
#~ msgstr "無法開啟要讀取的 %s"

#, fuzzy
#~ msgid "child failed reading from '%s'"
#~ msgstr "無法從 %s 建立區域"

#, fuzzy
#~ msgid "child failed writing to pipe"
#~ msgstr "無法寫入設定檔"

#, fuzzy
#~ msgid "failed to wait for process reading '%s'"
#~ msgstr "無法取得區域「%s」"

#, fuzzy
#~ msgid "failed to close new file '%s'"
#~ msgstr "無法開啟檔案"

#, fuzzy
#~ msgid "child failed to close new file '%s'"
#~ msgstr "無法開啟檔案"

#, fuzzy
#~ msgid "Failed to set group ID to %d"
#~ msgstr "無法將區域 %s 存至 %s"

#, fuzzy
#~ msgid "Failed to restore group ID to %d"
#~ msgstr "無法從 %s 回復區域"

#, fuzzy
#~ msgid "missing device information"
#~ msgstr "找不到裝置的資訊"

#~ msgid "failed to add domain to connection hash table"
#~ msgstr "無法為連線雜湊表新增區域"

#~ msgid "domain missing from connection hash table"
#~ msgstr "連線雜湊表中找不到區域"

#~ msgid "failed to add network to connection hash table"
#~ msgstr "無法將網路加入至連線雜湊表"

#~ msgid "network missing from connection hash table"
#~ msgstr "連線雜湊表中找不到網路"

#, fuzzy
#~ msgid "interface missing from connection hash table"
#~ msgstr "連線雜湊表中找不到網路"

#, fuzzy
#~ msgid "pool missing from connection hash table"
#~ msgstr "連線雜湊表中找不到區域"

#, fuzzy
#~ msgid "failed to add storage vol to connection hash table"
#~ msgstr "無法將網路加入至連線雜湊表"

#, fuzzy
#~ msgid "vol missing from connection hash table"
#~ msgstr "連線雜湊表中找不到區域"

#, fuzzy
#~ msgid "failed to add node dev to conn hash table"
#~ msgstr "無法將網路加入至連線雜湊表"

#, fuzzy
#~ msgid "dev missing from connection hash table"
#~ msgstr "連線雜湊表中找不到區域"

#, fuzzy
#~ msgid "failed to add secret to conn hash table"
#~ msgstr "無法將網路加入至連線雜湊表"

#, fuzzy
#~ msgid "secret missing from connection hash table"
#~ msgstr "連線雜湊表中找不到網路"

#, fuzzy
#~ msgid "failed to add network filter pool to connection hash table"
#~ msgstr "無法將網路加入至連線雜湊表"

#, fuzzy
#~ msgid "failed to add snapshot to domain hash table"
#~ msgstr "無法將網路加入至連線雜湊表"

#, fuzzy
#~ msgid "snapshot missing from domain hash table"
#~ msgstr "連線雜湊表中找不到網路"

#, fuzzy
#~ msgid "Failed to kill pid %d"
#~ msgstr "無法關閉插槽 %d\n"

#, fuzzy
#~ msgid "Failed to create veth device pair '%s', '%s': %d"
#~ msgstr "無法從 %s 建立區域"

#, fuzzy
#~ msgid "Failed to move '%s' into NS(pid=%d) (%d)"
#~ msgstr "無法開啟要讀取的 %s"

#, fuzzy
#~ msgid "Failed to set '%s' to '%s' (%d)"
#~ msgstr "無法暫停區域 %s"

#, fuzzy
#~ msgid "Failed to find SCSI device type %d"
#~ msgstr "無法從 %s 建立區域"

#, fuzzy
#~ msgid "virAsprintf failed"
#~ msgstr "操作失敗"

#, fuzzy
#~ msgid "Failed to run '%s' to create snapshot '%s' from disk '%s'"
#~ msgstr "無法從 %s 建立網路"

#, fuzzy
#~ msgid "Failed to run %s to get target list"
#~ msgstr "無法刪除網路 %s"

#, fuzzy
#~ msgid "Failed to run command '%s' with action '%s'"
#~ msgstr "無法將區域 %s 的核心傾印至 %s"

#, fuzzy
#~ msgid "Failed to execute %s hook script"
#~ msgstr "無法執行 %s\n"

#, fuzzy
#~ msgid "Failed to wait for '%s'"
#~ msgstr "無法取得網路「%s」"

#, fuzzy
#~ msgid "internal error: buffer too small"
#~ msgstr "內部錯誤 %s"

#, fuzzy
#~ msgid "failed to write proxy request"
#~ msgstr "無法寫入設定檔"

#, fuzzy
#~ msgid "Communication error with proxy: got %d bytes of %d"
#~ msgstr "使用代理伺服器時通訊錯誤：取得 %d 的位元組（自 %d 處）\n"

#, fuzzy
#~ msgid "Communication error with proxy: expected %d bytes got %d"
#~ msgstr "使用代理伺服器時通訊錯誤：預期 %d 個位元組取得 %d\n"

#, fuzzy
#~ msgid "Communication error with proxy: got %d bytes packet"
#~ msgstr "使用代理伺服器時通訊錯誤：取得 %d 位元組的封包\n"

#, fuzzy
#~ msgid "Communication error with proxy: malformed packet"
#~ msgstr "使用代理伺服器時通訊錯誤：封包格式錯誤\n"

#, fuzzy
#~ msgid "Cannot get domain details"
#~ msgstr "節點的區域清單"

#, fuzzy
#~ msgid "unable to open tty %s: %s"
#~ msgstr "無法暫停區域 %s"

#, fuzzy
#~ msgid "Failed to get local hostname"
#~ msgstr "無法取得 hypervisor 類型"

#, fuzzy
#~ msgid "Failed to get connection hostname"
#~ msgstr "無法取得 hypervisor 類型"

#~ msgid "No console available for domain\n"
#~ msgstr "區域中沒有可用的主控台\n"

#, fuzzy
#~ msgid "connection URI of the destination host"
#~ msgstr "連接客座端主控台"

#~ msgid "network name, id or uuid"
#~ msgstr "網路名稱、id 或 uuid"

#, fuzzy
#~ msgid "failed to disconnect from the hypervisor"
#~ msgstr "無法從 hypervisor 處斷線"