libvirt RPC infrastructure

libvirt includes a basic protocol and code to implement an extensible, secure client/server RPC service. This was originally designed for communication between the libvirt client library and the libvirtd daemon, but the code is now isolated to allow reuse in other areas of libvirt code. This document provides an overview of the protocol and structure / operation of the internal RPC library APIs.

RPC protocol

libvirt uses a simple, variable length, packet based RPC protocol. All structured data within packets is encoded using the XDR standard as currently defined by RFC 4506. On any connection running the RPC protocol, there can be multiple programs active, each supporting one or more versions. A program defines a set of procedures that it supports. The procedures can support call+reply method invocation, asynchronous events, and generic data streams. Method invocations can be overlapped, so waiting for a reply to one will not block the receipt of the reply to another outstanding method. The protocol was loosely inspired by the design of SunRPC. The definition of the RPC protocol is in the file src/rpc/virnetprotocol.x in the libvirt source tree.

Packet framing

On the wire, there is no explicit packet framing marker. Instead each packet is preceded by an unsigned 32-bit integer giving the total length of the packet in bytes. This length includes the 4-bytes of the length word itself. Conceptually the framing looks like this:

|~~~   Packet 1   ~~~|~~~   Packet 2   ~~~|~~~  Packet 3    ~~~|~~~

+-------+------------+-------+------------+-------+------------+...
| n=U32 | (n-4) * U8 | n=U32 | (n-4) * U8 | n=U32 | (n-4) * U8 |
+-------+------------+-------+------------+-------+------------+...

|~ Len ~|~   Data   ~|~ Len ~|~   Data   ~|~ Len ~|~   Data   ~|~

Packet data

The data in each packet is split into two parts, a short fixed length header, followed by a variable length payload. So a packet from the illustration above is more correctly shown as


+-------+-------------+---------------....---+
| n=U32 | 6*U32       | (n-(7*4))*U8         |
+-------+-------------+---------------....---+

|~ Len ~|~  Header   ~|~  Payload     ....  ~|

Packet header

The header contains 6 fields, encoded as signed/unsigned 32-bit integers.

+---------------+
| program=U32   |
+---------------+
| version=U32   |
+---------------+
| procedure=S32 |
+---------------+
| type=S32      |
+---------------+
| serial=U32    |
+---------------+
| status=S32    |
+---------------+
    
program
This is an arbitrarily chosen number that will uniquely identify the "service" running over the stream.
version
This is the version number of the program, by convention starting from '1'. When an incompatible change is made to a program, the version number is incremented. Ideally both versions will then be supported on the wire in parallel for backwards compatibility.
procedure
This is an arbitrarily chosen number that will uniquely identify the method call, or event associated with the packet. By convention, procedure numbers start from 1 and are assigned monotonically thereafter.
type

This can be one of the following enumeration values

  1. call: invocation of a method call
  2. reply: completion of a method call
  3. event: an asynchronous event
  4. stream: control info or data from a stream
serial
This is an number that starts from 1 and increases each time a method call packet is sent. A reply or stream packet will have a serial number matching the original method call packet serial. Events always have the serial number set to 0.
status

This can one of the following enumeration values

  1. ok: a normal packet. this is always set for method calls or events. For replies it indicates successful completion of the method. For streams it indicates confirmation of the end of file on the stream.
  2. error: for replies this indicates that the method call failed and error information is being returned. For streams this indicates that not all data was sent and the stream has aborted
  3. continue: for streams this indicates that further data packets will be following

Packet payload

The payload of a packet will vary depending on the type and status fields from the header.

For the exact payload information for each procedure, consult the XDR protocol definition for the program+version in question

Wire examples

The following diagrams illustrate some example packet exchanges between a client and server

Method call

A single method call and successful reply, for a program=8, version=1, procedure=3, which 10 bytes worth of input args, and 4 bytes worth of return values. The overall input packet length is 4 + 24 + 10 == 38, and output packet length 32

          +--+-----------------------+-----------+
   C -->  |38| 8 | 1 | 3 | 0 | 1 | 0 | .o.oOo.o. |  --> S  (call)
          +--+-----------------------+-----------+

          +--+-----------------------+--------+
   C <--  |32| 8 | 1 | 3 | 1 | 1 | 0 | .o.oOo |  <-- S  (reply)
          +--+-----------------------+--------+
    

Method call with error

An unsuccessful method call will instead return an error object

          +--+-----------------------+-----------+
   C -->  |38| 8 | 1 | 3 | 0 | 1 | 0 | .o.oOo.o. |  --> S   (call)
          +--+-----------------------+-----------+

          +--+-----------------------+--------------------------+
   C <--  |48| 8 | 1 | 3 | 2 | 1 | 0 | .o.oOo.o.oOo.o.oOo.o.oOo |  <-- S  (error)
          +--+-----------------------+--------------------------+
    

Method call with upload stream

A method call which also involves uploading some data over a stream will result in

          +--+-----------------------+-----------+
   C -->  |38| 8 | 1 | 3 | 0 | 1 | 0 | .o.oOo.o. |  --> S  (call)
          +--+-----------------------+-----------+

          +--+-----------------------+--------+
   C <--  |32| 8 | 1 | 3 | 1 | 1 | 0 | .o.oOo |  <-- S  (reply)
          +--+-----------------------+--------+

          +--+-----------------------+-------------....-------+
   C -->  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  --> S  (stream data up)
          +--+-----------------------+-------------....-------+
          +--+-----------------------+-------------....-------+
   C -->  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  --> S  (stream data up)
          +--+-----------------------+-------------....-------+
          +--+-----------------------+-------------....-------+
   C -->  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  --> S  (stream data up)
          +--+-----------------------+-------------....-------+
          ...
          +--+-----------------------+-------------....-------+
   C -->  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  --> S  (stream data up)
          +--+-----------------------+-------------....-------+
          +--+-----------------------+
   C -->  |24| 8 | 1 | 3 | 3 | 1 | 0 | --> S  (stream finish)
          +--+-----------------------+
          +--+-----------------------+
   C <--  |24| 8 | 1 | 3 | 3 | 1 | 0 | <-- S  (stream finish)
          +--+-----------------------+
    

Method call bidirectional stream

A method call which also involves a bi-directional stream will result in

          +--+-----------------------+-----------+
   C -->  |38| 8 | 1 | 3 | 0 | 1 | 0 | .o.oOo.o. |  --> S  (call)
          +--+-----------------------+-----------+

          +--+-----------------------+--------+
   C <--  |32| 8 | 1 | 3 | 1 | 1 | 0 | .o.oOo |  <-- S  (reply)
          +--+-----------------------+--------+

          +--+-----------------------+-------------....-------+
   C -->  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  --> S  (stream data up)
          +--+-----------------------+-------------....-------+
          +--+-----------------------+-------------....-------+
   C -->  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  --> S  (stream data up)
          +--+-----------------------+-------------....-------+
          +--+-----------------------+-------------....-------+
   C <--  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  <-- S  (stream data down)
          +--+-----------------------+-------------....-------+
          +--+-----------------------+-------------....-------+
   C -->  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  --> S  (stream data up)
          +--+-----------------------+-------------....-------+
          +--+-----------------------+-------------....-------+
   C -->  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  --> S  (stream data up)
          +--+-----------------------+-------------....-------+
          +--+-----------------------+-------------....-------+
   C <--  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  <-- S  (stream data down)
          +--+-----------------------+-------------....-------+
          +--+-----------------------+-------------....-------+
   C <--  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  <-- S  (stream data down)
          +--+-----------------------+-------------....-------+
          +--+-----------------------+-------------....-------+
   C <--  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  <-- S  (stream data down)
          +--+-----------------------+-------------....-------+
          +--+-----------------------+-------------....-------+
   C -->  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  --> S  (stream data up)
          +--+-----------------------+-------------....-------+
          ..
          +--+-----------------------+-------------....-------+
   C -->  |38| 8 | 1 | 3 | 3 | 1 | 2 | .o.oOo.o.oOo....o.oOo. |  --> S  (stream data up)
          +--+-----------------------+-------------....-------+
          +--+-----------------------+
   C -->  |24| 8 | 1 | 3 | 3 | 1 | 0 | --> S  (stream finish)
          +--+-----------------------+
          +--+-----------------------+
   C <--  |24| 8 | 1 | 3 | 3 | 1 | 0 | <-- S  (stream finish)
          +--+-----------------------+
    

Method calls overlapping

          +--+-----------------------+-----------+
   C -->  |38| 8 | 1 | 3 | 0 | 1 | 0 | .o.oOo.o. |  --> S  (call 1)
          +--+-----------------------+-----------+
          +--+-----------------------+-----------+
   C -->  |38| 8 | 1 | 3 | 0 | 2 | 0 | .o.oOo.o. |  --> S  (call 2)
          +--+-----------------------+-----------+
          +--+-----------------------+--------+
   C <--  |32| 8 | 1 | 3 | 1 | 2 | 0 | .o.oOo |  <-- S  (reply 2)
          +--+-----------------------+--------+
          +--+-----------------------+-----------+
   C -->  |38| 8 | 1 | 3 | 0 | 3 | 0 | .o.oOo.o. |  --> S  (call 3)
          +--+-----------------------+-----------+
          +--+-----------------------+--------+
   C <--  |32| 8 | 1 | 3 | 1 | 3 | 0 | .o.oOo |  <-- S  (reply 3)
          +--+-----------------------+--------+
          +--+-----------------------+-----------+
   C -->  |38| 8 | 1 | 3 | 0 | 4 | 0 | .o.oOo.o. |  --> S  (call 4)
          +--+-----------------------+-----------+
          +--+-----------------------+--------+
   C <--  |32| 8 | 1 | 3 | 1 | 1 | 0 | .o.oOo |  <-- S  (reply 1)
          +--+-----------------------+--------+
          +--+-----------------------+--------+
   C <--  |32| 8 | 1 | 3 | 1 | 4 | 0 | .o.oOo |  <-- S  (reply 4)
          +--+-----------------------+--------+
    

RPC security

There are various things to consider to ensure an implementation of the RPC protocol can be satisfactorily secured

Authentication/encryption

The basic RPC protocol does not define or require any specific authentication/encryption capabilities. A generic solution to providing encryption for the protocol is to run the protocol over a TLS encrypted data stream. x509 certificate checks can be done to form a crude authentication mechanism. It is also possible for an RPC program to negotiate an encryption / authentication capability, such as SASL, which may then also provide per-packet data encryption. Finally the protocol data stream can of course be tunnelled over transports such as SSH.

Data limits

Although the protocol itself defines many arbitrary sized data values in the payloads, to avoid denial of service attack there are a number of size limit checks prior to encoding or decoding data. There is a limit on the maximum size of a single RPC message, limit on the maximum string length, and limits on any other parameter which uses a variable length array. These limits can be raised, subject to agreement between client/server, without otherwise breaking compatibility of the RPC data on the wire.

Data validation

It is important that all data be fully validated before performing any actions based on the data. When reading an RPC packet, the first four bytes must be read and the max packet size limit validated, before any attempt is made to read the variable length packet data. After a complete packet has been read, the header must be decoded and all 6 fields fully validated, before attempting to dispatch the payload. Once dispatched, the payload can be decoded and passed onto the appropriate API for execution. The RPC code must not take any action based on the payload, since it has no way to validate the semantics of the payload data. It must delegate this to the execution API (e.g. corresponding libvirt public API).

RPC internal APIs

The generic internal RPC library code lives in the src/rpc/ directory of the libvirt source tree. Unless otherwise noted, the objects are all threadsafe. The core object types and their purposes are:

Overview of RPC objects

The following is a high level overview of the role of each of the main RPC objects

virNetSASLContextPtr (virnetsaslcontext.h)
The virNetSASLContext APIs maintain SASL state for a network service (server or client). This is primarily used on the server to provide a whitelist of allowed SASL usernames for clients.
virNetSASLSessionPtr (virnetsaslcontext.h)
The virNetSASLSession APIs maintain SASL state for a single network connection (socket). This is used to perform the multi-step SASL handshake and perform encryption/decryption of data once authenticated, via integration with virNetSocket.
virNetTLSContextPtr (virnettlscontext.h)
The virNetTLSContext APIs maintain TLS state for a network service (server or client). This is primarily used on the server to provide a whitelist of allowed x509 distinguished names, as well as diffie-hellman keys. It can also do validation of x509 certificates prior to initiating a connection, in order to improve detection of configuration errors.
virNetTLSSessionPtr (virnettlscontext.h)
The virNetTLSSession APIs maintain TLS state for a single network connection (socket). This is used to perform the multi-step TLS handshake and perform encryption/decryption of data once authenticated, via integration with virNetSocket.
virNetSocketPtr (virnetsocket.h)
The virNetSocket APIs provide a higher level wrapper around the raw BSD sockets and getaddrinfo APIs. They allow for creation of both server and client sockets. Data transports supported are TCP, UNIX, SSH tunnel or external command tunnel. Internally the TCP socket impl uses the getaddrinfo info APIs to ensure correct protocol-independent behaviour, thus supporting both IPv4 and IPv6. The socket APIs can be associated with a virNetSASLSessionPtr or virNetTLSSessionPtr object to allow seamless encryption/decryption of all writes and reads. For UNIX sockets it is possible to obtain the remote client user ID and process ID. Integration with the libvirt event loop also allows use of callbacks for notification of various I/O conditions
virNetMessagePtr (virnetmessage.h)
The virNetMessage APIs provide a wrapper around the libxdr API calls, to facilitate processing and creation of RPC packets. There are convenience APIs for encoding/encoding the packet headers, encoding/decoding the payload using an XDR filter, encoding/decoding a raw payload (for streams), and encoding a virErrorPtr object. There is also a means to add to/serve from a linked-list queue of messages.
virNetClientPtr (virnetclient.h)
The virNetClient APIs provide a way to connect to a remote server and run one or more RPC protocols over the connection. Connections can be made over TCP, UNIX sockets, SSH tunnels, or external command tunnels. There is support for both TLS and SASL session encryption. The client also supports management of multiple data streams over each connection. Each client object can be used from multiple threads concurrently, with method calls/replies being interleaved on the wire as required.
virNetClientProgramPtr (virnetclientprogram.h)
The virNetClientProgram APIs are used to register a program+version with the connection. This then enables invocation of method calls, receipt of asynchronous events and use of data streams, within that program+version. When created a set of callbacks must be supplied to take care of dispatching any incoming asynchronous events.
virNetClientStreamPtr (virnetclientstream.h)
The virNetClientStream APIs are used to control transmission and receipt of data over a stream active on a client. Streams provide a low latency, unlimited length, bi-directional raw data exchange mechanism layered over the RPC connection
virNetServerPtr (virnetserver.h)
The virNetServer APIs are used to manage a network server. A server exposed one or more programs, over one or more services. It manages multiple client connections invoking multiple RPC calls in parallel, with dispatch across multiple worker threads.
virNetServerMDNSPtr (virnetservermdns.h)
The virNetServerMDNS APIs are used to advertise a server across the local network, enabling clients to automatically detect the existence of remote services. This is done by interfacing with the Avahi mDNS advertisement service.
virNetServerClientPtr (virnetserverclient.h)
The virNetServerClient APIs are used to manage I/O related to a single client network connection. It handles initial validation and routing of incoming RPC packets, and transmission of outgoing packets.
virNetServerProgramPtr (virnetserverprogram.h)
The virNetServerProgram APIs are used to provide the implementation of a single program/version set. Primarily this includes a set of callbacks used to actually invoke the APIs corresponding to program procedure numbers. It is responsible for all the serialization of payloads to/from XDR.
virNetServerServicePtr (virnetserverservice.h)
The virNetServerService APIs are used to connect the server to one or more network protocols. A single service may involve multiple sockets (ie both IPv4 and IPv6). A service also has an associated authentication policy for incoming clients.

Client RPC dispatch

The client RPC code must allow for multiple overlapping RPC method calls to be invoked, transmission and receipt of data for multiple streams and receipt of asynchronous events. Understandably this involves coordination of multiple threads.

The core requirement in the client dispatch code is that only one thread is allowed to be performing I/O on the socket at any time. This thread is said to be "holding the buck". When any other thread comes along and needs to do I/O it must place its packets on a queue and delegate processing of them to the thread that has the buck. This thread will send out the method call, and if it sees a reply will pass it back to the waiting thread. If the other thread's reply hasn't arrived, by the time the main thread has got its own reply, then it will transfer responsibility for I/O to the thread that has been waiting the longest. It is said to be "passing the buck" for I/O.

When no thread is performing any RPC method call, or sending stream data there is still a need to monitor the socket for incoming I/O related to asynchronous events, or stream data receipt. For this task, a watch is registered with the event loop which triggers whenever the socket is readable. This watch is automatically disabled whenever any other thread grabs the buck, and re-enabled when the buck is released.

Example with buck passing

In the first example, a second thread issues a API call while the first thread holds the buck. The reply to the first call arrives first, so the buck is passed to the second thread.

        Thread-1
           |
           V
       Call API1()
           |
           V
       Grab Buck
           |           Thread-2
           V              |
       Send method1       V
           |          Call API2()
           V              |
        Wait I/O          V
           |<--------Queue method2
           V              |
       Send method2       V
           |          Wait for buck
           V              |
        Wait I/O          |
           |              |
           V              |
       Recv reply1        |
           |              |
           V              |
       Pass the buck----->|
           |              V
           V           Wait I/O
       Return API1()      |
                          V
                      Recv reply2
                          |
                          V
                     Release the buck
                          |
                          V
                      Return API2()
    

Example without buck passing

In this second example, a second thread issues an API call which is sent and replied to, before the first thread's API call has completed. The first thread thus notifies the second that its reply is ready, and there is no need to pass the buck

        Thread-1
           |
           V
       Call API1()
           |
           V
       Grab Buck
           |           Thread-2
           V              |
       Send method1       V
           |          Call API2()
           V              |
        Wait I/O          V
           |<--------Queue method2
           V              |
       Send method2       V
           |          Wait for buck
           V              |
        Wait I/O          |
           |              |
           V              |
       Recv reply2        |
           |              |
           V              |
      Notify reply2------>|
           |              V
           V          Return API2()
        Wait I/O
           |
           V
       Recv reply1
           |
           V
     Release the buck
           |
           V
       Return API1()
    

Example with async events

In this example, only one thread is present and it has to deal with some async events arriving. The events are actually dispatched to the application from the event loop thread

        Thread-1
           |
           V
       Call API1()
           |
           V
       Grab Buck
           |
           V
       Send method1
           |
           V
        Wait I/O
           |          Event thread
           V              ...
       Recv event1         |
           |               V
           V          Wait for timer/fd
       Queue event1        |
           |               V
           V           Timer fires
        Wait I/O           |
           |               V
           V           Emit event1
       Recv reply1         |
           |               V
           V          Wait for timer/fd
       Return API1()       |
                          ...
    

Server RPC dispatch

The RPC server code must support receipt of incoming RPC requests from multiple client connections, and parallel processing of all RPC requests, even many from a single client. This goal is achieved through a combination of event driven I/O, and multiple processing threads.

The main libvirt event loop thread is responsible for performing all socket I/O. It will read incoming packets from clients and willl transmit outgoing packets to clients. It will handle the I/O to/from streams associated with client API calls. When doing client I/O it will also pass the data through any applicable encryption layer (through use of the virNetSocket / virNetTLSSession and virNetSASLSession integration). What is paramount is that the event loop thread never do any task that can take a non-trivial amount of time.

When reading packets, the event loop will first read the 4 byte length word. This is validated to make sure it does not exceed the maximum permissible packet size, and the client is set to allow receipt of the rest of the packet data. Once a complete packet has been received, the next step is to decode the RPC header. The header is validated to ensure the request is sensible, ie the server should not receive a method reply from a client. If the client has not yet authenticated, a security check is also applied to make sure the procedure is on the whitelist of those allowed prior to auth. If the packet is a method call, it will be placed on a global processing queue. The event loop thread is now done with the packet for the time being.

The server has a pool of worker threads, which wait for method call packets to be queued. One of them will grab the new method call off the queue for processing. The first step is to decode the payload of the packet to extract the method call arguments. The worker does not attempt to do any semantic validation of the arguments, except to make sure the size of any variable length fields is below defined limits.

The worker now invokes the libvirt API call that corresponds to the procedure number in the packet header. The worker is thus kept busy until the API call completes. The implementation of the API call is responsible for doing semantic validation of parameters and any MAC security checks on the objects affected.

Once the API call has completed, the worker thread will take the return value and output parameters, or error object and encode them into a reply packet. Again it does not attempt to do any semantic validation of output data, aside from variable length field limit checks. The worker thread puts the reply packet onto the transmission queue for the client. The worker is now finished and goes back to wait for another incoming method call.

The main event loop is back in charge and when the client socket becomes writable, it will start sending the method reply packet back to the client.

At any time the libvirt connection object can emit asynchronous events. These are handled by callbacks in the main event thread. The callback will simply encode the event parameters into a new data packet and place the packet on the client transmission queue.

Incoming and outgoing stream packets are also directly handled by the main event thread. When an incoming stream packet is received, instead of placing it in the global dispatch queue for the worker threads, it is sidetracked into a per-stream processing queue. When the stream becomes writable, queued incoming stream packets will be processed, passing their data payload onto the stream. Conversely when the stream becomes readable, chunks of data will be read from it, encoded into new outgoing packets, and placed on the client's transmit queue

Example with overlapping methods

This example illustrates processing of two incoming methods with overlapping execution

   Event thread    Worker 1       Worker 2
       |               |              |
       V               V              V
    Wait I/O       Wait Job       Wait Job
       |               |              |
       V               |              |
   Recv method1        |              |
       |               |              |
       V               |              |
   Queue method1       V              |
       |          Serve method1       |
       V               |              |
    Wait I/O           V              |
       |           Call API1()        |
       V               |              |
   Recv method2        |              |
       |               |              |
       V               |              |
   Queue method2       |              V
       |               |         Serve method2
       V               V              |
    Wait I/O      Return API1()       V
       |               |          Call API2()
       |               V              |
       V         Queue reply1         |
   Send reply1         |              |
       |               V              V
       V           Wait Job       Return API2()
    Wait I/O           |              |
       |              ...             V
       V                          Queue reply2
   Send reply2                        |
       |                              V
       V                          Wait Job
    Wait I/O                          |
       |                             ...
      ...
    

Example with stream data

This example illustrates processing of stream data

   Event thread
       |
       V
    Wait I/O
       |
       V
   Recv stream1
       |
       V
   Queue stream1
       |
       V
    Wait I/O
       |
       V
   Recv stream2
       |
       V
   Queue stream2
       |
       V
    Wait I/O
       |
       V
   Write stream1
       |
       V
   Write stream2
       |
       V
    Wait I/O
       |
      ...