REMOTE_DRIVER_GENERATED = \
	remote/remote_protocol.c \
	remote/remote_protocol.h \
	remote/remote_client_bodies.h \
	remote/lxc_protocol.c \
	remote/lxc_protocol.h \
	remote/lxc_client_bodies.h \
	remote/qemu_protocol.c \
	remote/qemu_protocol.h \
	remote/qemu_client_bodies.h \
	$(NULL)

REMOTE_DRIVER_SOURCES = \
	remote/remote_driver.c \
	remote/remote_driver.h \
	$(REMOTE_DRIVER_GENERATED) \
	$(NULL)

LIBVIRTD_GENERATED = \
	remote/remote_daemon_dispatch_stubs.h \
	remote/remote_daemon_dispatch_lxc_stubs.h \
	remote/remote_daemon_dispatch_qemu_stubs.h \
	$(NULL)

LIBVIRTD_SOURCES = \
	remote/remote_daemon.c \
	remote/remote_daemon.h \
	remote/remote_daemon_config.c \
	remote/remote_daemon_config.h \
	remote/remote_daemon_dispatch.c \
	remote/remote_daemon_dispatch.h \
	remote/remote_daemon_stream.c \
	remote/remote_daemon_stream.h \
	$(LIBVIRTD_GENERATED) \
	$(NULL)


LOGROTATE_FILES_IN += \
	remote/libvirtd.qemu.logrotate.in \
	remote/libvirtd.lxc.logrotate.in \
	remote/libvirtd.libxl.logrotate.in \
	remote/libvirtd.uml.logrotate.in \
	remote/libvirtd.logrotate.in \
	$(NULL)

SYSVINIT_FILES_IN += remote/libvirtd.init.in

SYSCONF_FILES += remote/libvirtd.sysconf

PODFILES += remote/libvirtd.pod
MANINFILES += libvirtd.8.in

SYSTEMD_UNIT_FILES_IN += \
	remote/libvirtd.service.in \
	remote/virt-guest-shutdown.target.in \
	$(NULL)

UPSTART_FILES += remote/libvirtd.upstart

REMOTE_PROTOCOL = $(srcdir)/remote/remote_protocol.x
LXC_PROTOCOL = $(srcdir)/remote/lxc_protocol.x
QEMU_PROTOCOL = $(srcdir)/remote/qemu_protocol.x
REMOTE_DRIVER_PROTOCOL = \
	$(REMOTE_PROTOCOL) \
	$(QEMU_PROTOCOL) \
	$(LXC_PROTOCOL) \
	$(NULL)

DRIVER_SOURCE_FILES += $(REMOTE_DRIVER_SOURCES)

EXTRA_DIST += \
	$(REMOTE_DRIVER_PROTOCOL) \
	$(REMOTE_DRIVER_SOURCES) \
	$(LIBVIRTD_SOURCES) \
	remote/test_libvirtd.aug.in \
	remote/libvirtd.aug \
	remote/libvirtd.conf \
	remote/libvirtd.policy.in \
	remote/libvirtd.rules \
	remote/libvirtd.sasl \
	remote/libvirtd.sysctl \
	$(NULL)

if WITH_REMOTE
noinst_LTLIBRARIES += libvirt_driver_remote.la
libvirt_la_BUILT_LIBADD += libvirt_driver_remote.la
libvirt_driver_remote_la_CFLAGS = \
	$(XDR_CFLAGS) \
	-I$(srcdir)/conf \
	-I$(srcdir)/rpc \
	$(AM_CFLAGS) \
	$(NULL)
libvirt_driver_remote_la_LDFLAGS = $(AM_LDFLAGS)
libvirt_driver_remote_la_SOURCES = $(REMOTE_DRIVER_SOURCES)

BUILT_SOURCES += $(REMOTE_DRIVER_GENERATED)
MAINTAINERCLEANFILES += $(REMOTE_DRIVER_GENERATED)

endif WITH_REMOTE

if WITH_REMOTE
USED_SYM_FILES += $(srcdir)/libvirt_remote.syms
else ! WITH_REMOTE
SYM_FILES += $(srcdir)/libvirt_remote.syms
endif ! WITH_REMOTE

if WITH_LIBVIRTD

sbin_PROGRAMS += libvirtd

BUILT_SOURCES += $(LIBVIRTD_GENERATED)
MAINTAINERCLEANFILES += $(LIBVIRTD_GENERATED)

augeas_DATA += remote/libvirtd.aug

augeastest_DATA += test_libvirtd.aug

conf_DATA += remote/libvirtd.conf

CLEANFILES += test_libvirtd.aug

if WITH_POLKIT
policydir = $(datadir)/polkit-1/actions
policyauth = auth_admin_keep
endif WITH_POLKIT

BUILT_SOURCES += libvirtd.policy
CLEANFILES += libvirtd.policy

man8_MANS += libvirtd.8

libvirtd_SOURCES = $(LIBVIRTD_SOURCES)

libvirtd_CFLAGS = \
	$(LIBXML_CFLAGS) \
	$(GNUTLS_CFLAGS) \
	$(SASL_CFLAGS) \
	$(XDR_CFLAGS) \
	$(DBUS_CFLAGS) \
	$(LIBNL_CFLAGS) \
	$(WARN_CFLAGS) \
	$(PIE_CFLAGS) \
	$(COVERAGE_CFLAGS) \
	-I$(srcdir)/access \
	-I$(srcdir)/conf \
	-I$(srcdir)/rpc \
	$(NULL)

libvirtd_LDFLAGS = \
	$(RELRO_LDFLAGS) \
	$(PIE_LDFLAGS) \
	$(COVERAGE_LDFLAGS) \
	$(NO_INDIRECT_LDFLAGS) \
	$(NO_UNDEFINED_LDFLAGS) \
	$(NULL)

libvirtd_LDADD = \
	libvirt_driver_admin.la \
	libvirt-lxc.la \
	libvirt-qemu.la \
	libvirt.la \
	$(LIBXML_LIBS) \
	$(GNUTLS_LIBS) \
	$(SASL_LIBS) \
	$(DBUS_LIBS) \
	$(LIBNL_LIBS) \
	$(NULL)

if WITH_DTRACE_PROBES
libvirtd_LDADD += ../src/libvirt_probes.lo
endif WITH_DTRACE_PROBES

libvirtd_LDADD += \
	../gnulib/lib/libgnu.la \
	$(LIBSOCKET) \
	$(NULL)

INSTALL_DATA_DIRS += remote

install-data-remote:
	$(MKDIR_P) "$(DESTDIR)$(localstatedir)/log/libvirt"

uninstall-data-remote:
	rmdir "$(DESTDIR)$(localstatedir)/log/libvirt" ||:

AUGEAS_DIRS += remote

test_libvirtd.aug: remote/test_libvirtd.aug.in \
		remote/libvirtd.conf $(AUG_GENTEST)
	$(AM_V_GEN)$(AUG_GENTEST) $(srcdir)/remote/libvirtd.conf $< $@

check-augeas-remote: test_libvirtd.aug
	$(AM_V_GEN)if test -x '$(AUGPARSE)'; then \
	    '$(AUGPARSE)' -I $(srcdir)/remote test_libvirtd.aug; \
	fi

if WITH_SYSCTL
# Use $(prefix)/lib rather than $(libdir), since man sysctl.d insists on
# /usr/lib/sysctl.d/ even when libdir is /usr/lib64
install-sysctl:
	$(MKDIR_P) $(DESTDIR)$(prefix)/lib/sysctl.d
	$(INSTALL_DATA) $(srcdir)/remote/libvirtd.sysctl \
	  $(DESTDIR)$(prefix)/lib/sysctl.d/60-libvirtd.conf

uninstall-sysctl:
	rm -f $(DESTDIR)$(prefix)/lib/sysctl.d/60-libvirtd.conf
	rmdir $(DESTDIR)$(prefix)/lib/sysctl.d || :
else ! WITH_SYSCTL
install-sysctl:
uninstall-sysctl:
endif ! WITH_SYSCTL

if WITH_POLKIT
install-polkit::
	$(MKDIR_P) $(DESTDIR)$(policydir)
	$(INSTALL_DATA) libvirtd.policy $(DESTDIR)$(policydir)/org.libvirt.unix.policy
	$(MKDIR_P) $(DESTDIR)$(datadir)/polkit-1/rules.d
	$(INSTALL_DATA) $(srcdir)/remote/libvirtd.rules \
		$(DESTDIR)$(datadir)/polkit-1/rules.d/50-libvirt.rules

uninstall-polkit::
	rm -f $(DESTDIR)$(policydir)/org.libvirt.unix.policy
	rmdir $(DESTDIR)$(policydir) || :
	rm -f $(DESTDIR)$(datadir)/polkit-1/rules.d/50-libvirt.rules
	rmdir $(DESTDIR)$(datadir)/polkit-1/rules.d || :

else ! WITH_POLKIT
install-polkit::
uninstall-polkit::
endif ! WITH_POLKIT

else ! WITH_LIBVIRTD
install-polkit::
uninstall-polkit::
install-sysctl::
uninstall-sysctl::
endif ! WITH_LIBVIRTD

.PHONY: \
	install-data-remote \
	uninstall-data-remote \
	check-augeas-remote \
	$(NULL)

# This is needed for clients too, so can't wrap in
# the WITH_LIBVIRTD conditional
if WITH_SASL
install-sasl:
	$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sasl2/
	$(INSTALL_DATA) $(srcdir)/remote/libvirtd.sasl \
		$(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf

uninstall-sasl:
	rm -f $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
	rmdir $(DESTDIR)$(sysconfdir)/sasl2/ || :
else ! WITH_SASL
install-sasl:
uninstall-sasl:
endif ! WITH_SASL

libvirtd.policy: remote/libvirtd.policy.in $(top_builddir)/config.status
	$(AM_V_GEN) sed \
	    -e 's|[@]authaction[@]|$(policyauth)|g' \
	    < $< > $@-t && \
	mv $@-t $@

libvirtd.init: remote/libvirtd.init.in $(top_builddir)/config.status
	$(AM_V_GEN)sed \
	    -e 's|[@]localstatedir[@]|$(localstatedir)|g' \
	    -e 's|[@]sbindir[@]|$(sbindir)|g' \
	    -e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
	    < $< > $@-t && \
	    chmod a+x $@-t && \
	    mv $@-t $@

libvirtd.service: remote/libvirtd.service.in $(top_builddir)/config.status
	$(AM_V_GEN)sed \
	    -e 's|[@]localstatedir[@]|$(localstatedir)|g' \
	    -e 's|[@]sbindir[@]|$(sbindir)|g' \
	    -e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
	    < $< > $@-t && \
	    mv $@-t $@

virt-guest-shutdown.target: remote/virt-guest-shutdown.target.in \
			$(top_builddir)/config.status
	$(AM_V_GEN)cp $< $@


remote/remote_client_bodies.h: $(srcdir)/rpc/gendispatch.pl \
		$(REMOTE_PROTOCOL) Makefile.am
	$(AM_V_GEN)$(PERL) -w $(srcdir)/rpc/gendispatch.pl --mode=client \
	  remote REMOTE $(REMOTE_PROTOCOL) \
	  > $(srcdir)/remote/remote_client_bodies.h

remote/lxc_client_bodies.h: $(srcdir)/rpc/gendispatch.pl \
		$(LXC_PROTOCOL) Makefile.am
	$(AM_V_GEN)$(PERL) -w $(srcdir)/rpc/gendispatch.pl --mode=client \
	  lxc LXC $(LXC_PROTOCOL) \
	  > $(srcdir)/remote/lxc_client_bodies.h

remote/qemu_client_bodies.h: $(srcdir)/rpc/gendispatch.pl \
		$(QEMU_PROTOCOL) Makefile.am
	$(AM_V_GEN)$(PERL) -w $(srcdir)/rpc/gendispatch.pl --mode=client \
	  qemu QEMU $(QEMU_PROTOCOL) \
	  > $(srcdir)/remote/qemu_client_bodies.h

remote/remote_daemon_dispatch_stubs.h: $(srcdir)/rpc/gendispatch.pl \
		$(REMOTE_PROTOCOL) Makefile.am
	$(AM_V_GEN)$(PERL) -w $(top_srcdir)/src/rpc/gendispatch.pl \
	  --mode=server remote REMOTE $(REMOTE_PROTOCOL) \
	  > $(srcdir)/remote/remote_daemon_dispatch_stubs.h

remote/remote_daemon_dispatch_lxc_stubs.h: $(srcdir)/rpc/gendispatch.pl \
		$(LXC_PROTOCOL) Makefile.am
	$(AM_V_GEN)$(PERL) -w $(top_srcdir)/src/rpc/gendispatch.pl \
	  --mode=server lxc LXC $(LXC_PROTOCOL) \
	  > $(srcdir)/remote/remote_daemon_dispatch_lxc_stubs.h

remote/remote_daemon_dispatch_qemu_stubs.h: $(srcdir)/rpc/gendispatch.pl \
		$(QEMU_PROTOCOL) Makefile.am
	$(AM_V_GEN)$(PERL) -w $(top_srcdir)/src/rpc/gendispatch.pl \
	  --mode=server qemu QEMU $(QEMU_PROTOCOL) \
	  > $(srcdir)/remote/remote_daemon_dispatch_qemu_stubs.h

libvirtd.8.in: remote/libvirtd.pod
	$(AM_V_GEN)$(POD2MAN) --section=8 $< $@-t1 && \
	if grep 'POD ERROR' $@-t1; then rm $@-t1; exit 1; fi && \
	sed \
		-e 's|SYSCONFDIR|\@sysconfdir\@|g' \
		-e 's|LOCALSTATEDIR|\@localstatedir\@|g' \
		< $@-t1 > $@-t2 && \
	rm -f $@-t1 && \
	mv $@-t2 $@