This page describes the usage of libvirt APIs for spawning processes / commands from libvirt drivers. All code is required to use these APIs
The POSIX specification includes a number of APIs for spawning processes / commands, but they suffer from a number of flaws
fork+exec: The lowest & most flexible
level, but very hard to use correctly / safely. It
is easy to leak file descriptors, have unexpected
signal handler behaviour and not handle edge cases.
Furthermore, it is not portable to mingw.
system: Convenient if you don't care
about capturing command output, but has the serious
downside that the command string is interpreted by
the shell. This makes it very dangerous to use, because
improperly validated user input can lead to exploits
via shell meta characters.
popen: Inherits the flaws of
system, and has no option for bi-directional
communication.
posix_spawn: A half-way house between
simplicity of system() and the flexibility of fork+exec.
It does not allow for a couple of important features
though, such as running a hook between the fork+exec
stage, or closing all open file descriptors.Due to the problems mentioned with each of these, libvirt driver code must not use any of the above APIs. Historically libvirt provided a higher level API known as virExec. This was wrapper around fork+exec, in a similar style to posix_spawn, but with a few more features.
This wrapper still suffered from a number of problems. Handling command cleanup via waitpid() is overly complex & error prone for most usage. Building up the argv[] + env[] string arrays is quite cumbersome and error prone, particularly wrt memory leak / OOM handling.
There is now a high level API that provides a safe and
flexible way to spawn commands, which prevents the most
common errors & is easy to code against. This
code is provided in the src/util/command.h
header which can be imported using #include "command.h"
The first step is to declare what command is to be
executed. The command name can be either a fully
qualified path, or a bare command name. In the latter
case it will be resolved wrt the $PATH
environment variable.
virCommandPtr cmd = virCommandNew("/usr/bin/dnsmasq");
There is no need to check for allocation failure after
virCommandNew. This will be detected and
reported at a later time.
There are a number of APIs for adding arguments to a command. To add a direct string arg
virCommandAddArg(cmd, "-strict-order");
If an argument takes an attached value of the form
-arg=val, then this can be done using
virCommandAddArgPair(cmd, "--conf-file", "/etc/dnsmasq.conf");
If an argument needs to be formatted as if by
printf:
virCommandAddArgFormat(cmd, "%d", count);
To add a entire NULL terminated array of arguments in one go, there are two options.
const char *const args[] = {
"--strict-order", "--except-interface", "lo", NULL
};
virCommandAddArgSet(cmd, args);
virCommandAddArgList(cmd, "--domain", "localdomain", NULL);
This can also be done at the time of initial construction of
the virCommandPtr object:
const char *const args[] = {
"/usr/bin/dnsmasq",
"--strict-order", "--except-interface",
"lo", "--domain", "localdomain", NULL
};
virCommandPtr cmd1 = virCommandNewArgs(cmd, args);
virCommandPtr cmd2 = virCommandNewArgList("/usr/bin/dnsmasq",
"--domain", "localdomain", NULL);
By default a command will inherit all environment variables from the current process. Generally this is not desirable and a customized environment will be more suitable. Any customization done via the following APIs will prevent inheritance of any existing environment variables unless explicitly allowed. The first step is usually to pass through a small number of variables from the current process.
virCommandAddEnvPassCommon(cmd);
This has now set up a clean environment for the child, passing
through PATH, LD_PRELOAD,
LD_LIBRARY_PATH, HOME,
USER, LOGNAME and TMPDIR.
Furthermore it will explicitly set LC_ALL=C to
avoid unexpected localization of command output. Further
variables can be passed through from parent explicitly:
virCommandAddEnvPass(cmd, "DISPLAY"); virCommandAddEnvPass(cmd, "XAUTHORITY");
To define an environment variable in the child with an separate key / value:
virCommandAddEnvPair(cmd, "TERM", "xterm");
If the key/value pair is pre-formatted in the right format, it can be set directly
virCommandAddEnvString(cmd, "TERM=xterm");
Normally the spawned command will retain the current process and process group as its parent. If the current process dies, the child will then (usually) be terminated too. If this cleanup is not desired, then the command should be marked as daemonized:
virCommandDaemonize(cmd);
When daemonizing a command, the PID visible from the caller will be that of the intermediate process, not the actual damonized command. If the PID of the real command is required then a pidfile can be requested
virCommandSetPidFile(cmd, "/var/run/dnsmasq.pid");
This PID file is guaranteed to be written before the intermediate process exits.
Normally a command will inherit all privileges of the current process. To restrict what a command can do, it is possible to request that all its capabilities are cleared. With this done it will only be able to access resources for which it has explicit DAC permissions
virCommandClearCaps(cmd);
To prevent unintended resource leaks to child processes, the
child defaults to closing all open file handles, and setting
stdin/out/err to /dev/null. It is possible to
allow an open file handle to be passed into the child, while
controlling whether that handle remains open in the parent or
guaranteeing that the handle will be closed in the parent after
virCommandRun, virCommandRunAsync, or virCommandFree.
int sharedfd = open("cmd.log", "w+");
int childfd = open("conf.txt", "r");
virCommandPreserveFD(cmd, sharedfd);
virCommandTransferFD(cmd, childfd);
if (VIR_CLOSE(sharedfd) < 0)
goto cleanup;
With this, both file descriptors sharedfd and childfd in the current process remain open as the same file descriptors in the child. Meanwhile, after the child is spawned, sharedfd remains open in the parent, while childfd is closed.
For stdin/out/err it is sometimes necessary to map a file handle. If a mapped file handle is a pipe fed or consumed by the caller, then the caller should use virCommandDaemonize or virCommandRunAsync rather than virCommandRun to avoid deadlock (mapping a regular file is okay with virCommandRun). To attach file descriptor 7 in the current process to stdin in the child:
virCommandSetInputFD(cmd, 7);
Equivalently to redirect stdout or stderr in the child, pass in a pointer to the desired handle
int outfd = open("out.log", "w+");
int errfd = open("err.log", "w+");
virCommandSetOutputFD(cmd, &outfd);
virCommandSetErrorFD(cmd, &errfd);
Alternatively it is possible to request that a pipe be created to fetch stdout/err in the parent, by initializing the FD to -1.
int outfd = -1; int errfd = -1 virCommandSetOutputFD(cmd, &outfd); virCommandSetErrorFD(cmd, &errfd);
Once the command is running, outfd
and errfd will be initialized with
valid file handles that can be read from. It is
permissible to pass the same pointer for both outfd
and errfd, in which case both standard streams in
the child will share the same fd in the parent.
Normally, file descriptors opened to collect output from a child process perform blocking I/O, but the parent process can request non-blocking mode:
virCommandNonblockingFDs(cmd);
Often dealing with file handles for stdin/out/err is unnecessarily complex; an alternative is to let virCommandRun perform the I/O and interact via string buffers. Use of a buffer only works with virCommandRun, and cannot be mixed with pipe file descriptors. That is, the choice is generally between managing all I/O in the caller (any fds not specified are tied to /dev/null), or letting virCommandRun manage all I/O via strings (unspecified stdin is tied to /dev/null, and unspecified output streams get logged but are otherwise discarded).
It is possible to specify a string buffer to act as the data source for the child's stdin, if there are no embedded NUL bytes, and if the command will be run with virCommandRun:
const char *input = "Hello World\n"; virCommandSetInputBuffer(cmd, input);
Similarly it is possible to request that the child's stdout/err be redirected into a string buffer, if the output is not expected to contain NUL bytes, and if the command will be run with virCommandRun:
char *output = NULL, *errors = NULL; virCommandSetOutputBuffer(cmd, &output); virCommandSetErrorBuffer(cmd, &errors);
Once the command has finished executing, these buffers will contain the output. Allocation is guaranteed if virCommandRun or virCommandWait succeed (if there was no output, then the buffer will contain an allocated empty string); if the command failed, then the buffers usually contain a best-effort allocation of collected information (however, on an out-of-memory condition, the buffer may still be NULL). The caller is responsible for freeing registered buffers, since the buffers are designed to persist beyond virCommandFree.
Daemonized commands are always run with "/" as the current working directory. All other commands default to running in the same working directory as the parent process, but an alternate directory can be specified:
virCommandSetWorkingDirectory(cmd, LOCALSTATEDIR);
If anything else is needed, it is possible to request a hook function that is called in the child after the fork, as the last thing before changing directories, dropping capabilities, and executing the new process. If hook(opaque) returns non-zero, then the child process will not be run.
virCommandSetPreExecHook(cmd, hook, opaque);
Sometimes, it is desirable to log what command will be run, or even to use virCommand solely for creation of a single consolidated string without running anything.
int logfd = ...;
char *timestamp = virTimestamp();
char *string = NULL;
dprintf(logfd, "%s: ", timestamp);
VIR_FREE(timestamp);
virCommandWriteArgLog(cmd, logfd);
string = virCommandToString(cmd);
if (string)
VIR_DEBUG("about to run %s", string);
VIR_FREE(string);
if (virCommandRun(cmd) < 0)
return -1;
For most commands, the desired behaviour is to spawn the command, wait for it to complete & exit and then check that its exit status is zero
if (virCommandRun(cmd, NULL) < 0)
return -1;
Note: if the command has been daemonized
this will only block & wait for the intermediate process,
not the real command. virCommandRun will
report on any errors that have occurred upon this point
with all previous API calls. If the command fails to
run, or exits with non-zero status an error will be
reported via normal libvirt error infrastructure. If a
non-zero exit status can represent a success condition,
it is possible to request the exit status and perform
that check manually instead of letting virCommandRun
raise the error
int status;
if (virCommandRun(cmd, &status) < 0)
return -1;
if (WEXITSTATUS(status) ...) {
...do stuff...
}
In certain complex scenarios, particularly special I/O handling is required for the child's stdin/err/out it will be necessary to run the command asynchronously and wait for completion separately.
pid_t pid;
if (virCommandRunAsync(cmd, &pid) < 0)
return -1;
... do something while pid is running ...
int status;
if (virCommandWait(cmd, &status) < 0)
return -1;
if (WEXITSTATUS(status)...) {
..do stuff..
}
As with virCommandRun, the status
arg for virCommandWait can be omitted, in which
case it will validate that exit status is zero and raise an
error if not.
There are two approaches to child process cleanup, determined by how long you want to keep the virCommand object in scope.
1. If the virCommand object will outlast the child process, then pass NULL for the pid argument, and the child process will automatically be reaped at virCommandFree, unless you reap it sooner via virCommandWait or virCommandAbort.
2. If the child process must exist on at least one code path after virCommandFree, then pass a pointer for the pid argument. Later, to clean up the child, call virPidWait or virPidAbort. Before virCommandFree, you can still use virCommandWait or virCommandAbort to reap the process.
Once the command has been executed, or if execution
has been abandoned, it is necessary to release
resources associated with the virCommandPtr
object. This is done with:
virCommandFree(cmd);
There is no need to check if cmd is NULL
before calling virCommandFree. This scenario
is handled automatically. If the command is still running,
it will be forcably killed and cleaned up (via waitpid).
This shows a complete example usage of the APIs roughly using the libvirt source src/util/hooks.c
int runhook(const char *drvstr, const char *id,
const char *opstr, const char *subopstr,
const char *extra) {
int ret;
char *path;
virCommandPtr cmd;
ret = virBuildPath(&path, LIBVIRT_HOOK_DIR, drvstr);
if ((ret < 0) || (path == NULL)) {
virHookReportError(VIR_ERR_INTERNAL_ERROR,
_("Failed to build path for %s hook"),
drvstr);
return -1;
}
cmd = virCommandNew(path);
VIR_FREE(path);
virCommandAddEnvPassCommon(cmd);
virCommandAddArgList(cmd, id, opstr, subopstr, extra, NULL);
virCommandSetInputBuffer(cmd, input);
ret = virCommandRun(cmd, NULL);
virCommandFree(cmd);
return ret;
}
In this example, the command is being run synchronously.
A pre-formatted string is being fed to the command as
its stdin. The command takes four arguments, and has a
minimal set of environment variables passed down. In
this example, the code does not require any error checking.
All errors are reported by the virCommandRun
method, and the exit status from this is returned to
the caller to handle as desired.