# translation of libvirt.HEAD.po to Simplified Chinese # translation of zh_CN.po to # translation of zh_CN.po to # translation of zh_CN.po to # translation of libvirt.HEAD. # Copyright (C) 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is distributed under the same license as the libvirt.HEAD package. # # liutao , 2006. # Tony Fu , 2006, 2007. # Leah Liu , 2007, 2008, 2009. # Leah Liu , 2009. # pingman , 2009. msgid "" msgstr "" "Project-Id-Version: libvirt.HEAD\n" "Report-Msgid-Bugs-To: libvir-list@redhat.com\n" "POT-Creation-Date: 2009-10-14 10:26+0200\n" "PO-Revision-Date: 2009-09-10 16:40+1000\n" "Last-Translator: Leah Liu \n" "Language-Team: Simplified Chinese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" #: daemon/dispatch.c:375 #, c-format msgid "program mismatch (actual %x, expected %x)" msgstr "程序不匹配（实际是 %x，想要的是 %x）" #: daemon/dispatch.c:381 #, c-format msgid "version mismatch (actual %x, expected %x)" msgstr "版本不匹配（实际是 %x，想要的是 %x）" #: daemon/dispatch.c:401 #, c-format msgid "type (%d) != REMOTE_CALL" msgstr "类型 (%d) != REMOTE_CALL" #: daemon/dispatch.c:449 #, c-format msgid "status (%d) != REMOTE_OK" msgstr "status (%d) != REMOTE_OK" #: daemon/dispatch.c:467 msgid "authentication required" msgstr "需要验证" #: daemon/dispatch.c:475 #, c-format msgid "unknown procedure: %d" msgstr "未知过程：%d" #: daemon/dispatch.c:487 msgid "parse args failed" msgstr "解析参数失败" #: daemon/libvirtd.c:243 #, c-format msgid "Cannot access %s '%s': %s" msgstr "无法访问 %s '%s'：%s" #: daemon/libvirtd.c:260 #, c-format msgid "gnutls_certificate_allocate_credentials: %s" msgstr "gnutls_certificate_allocate_credentials: %s" #: daemon/libvirtd.c:273 #, c-format msgid "gnutls_certificate_set_x509_trust_file: %s" msgstr "gnutls_certificate_set_x509_trust_file: %s" #: daemon/libvirtd.c:287 #, c-format msgid "gnutls_certificate_set_x509_crl_file: %s" msgstr "gnutls_certificate_set_x509_crl_file: %s" #: daemon/libvirtd.c:304 #, c-format msgid "gnutls_certificate_set_x509_key_file: %s" msgstr "gnutls_certificate_set_x509_key_file: %s" #: daemon/libvirtd.c:317 #, c-format msgid "gnutls_dh_params_init: %s" msgstr "gnutls_dh_params_init: %s" #: daemon/libvirtd.c:322 #, c-format msgid "gnutls_dh_params_generate2: %s" msgstr "gnutls_dh_params_generate2: %s" #: daemon/libvirtd.c:344 #, c-format msgid "Failed to read from signal pipe: %s" msgstr "从信号管道读取失败：%s" #: daemon/libvirtd.c:354 msgid "Reloading configuration on SIGHUP" msgstr "在 SIGHUP 中重新载入配置" #: daemon/libvirtd.c:356 msgid "Error while reloading drivers" msgstr "重新载入驱动程序时出错" #: daemon/libvirtd.c:362 #, c-format msgid "Shutting down on signal %d" msgstr "在信号 %d 中关闭" #: daemon/libvirtd.c:367 #, c-format msgid "Received unexpected signal %d" msgstr "收到意外信号 %d " #: daemon/libvirtd.c:453 #, c-format msgid "Failed to open pid file '%s' : %s" msgstr "打开 pid 文件 '%s' : %s 失败" #: daemon/libvirtd.c:459 #, c-format msgid "Failed to fdopen pid file '%s' : %s" msgstr "打开 fdopen 文件 '%s' : %s 失败" #: daemon/libvirtd.c:466 #, c-format msgid "Failed to write to pid file '%s' : %s" msgstr "向 pid 文件 '%s' : %s 写入失败" #: daemon/libvirtd.c:473 #, c-format msgid "Failed to close pid file '%s' : %s" msgstr "关闭 pid 文件 '%s' : %s 失败" #: daemon/libvirtd.c:490 msgid "Failed to allocate memory for struct qemud_socket" msgstr "为建立 qemud_socket 分配内存失败" #: daemon/libvirtd.c:500 #, c-format msgid "Failed to create socket: %s" msgstr "创建套接字失败：%s" #: daemon/libvirtd.c:512 #, c-format msgid "Path %s too long for unix socket" msgstr "" #: daemon/libvirtd.c:524 #, c-format msgid "Failed to bind socket to '%s': %s" msgstr "将套接字绑定到 '%s' : %s 失败" #: daemon/libvirtd.c:533 #, c-format msgid "Failed to listen for connections on '%s': %s" msgstr "侦听到 '%s' : %s 的连接失败" #: daemon/libvirtd.c:544 daemon/libvirtd.c:685 msgid "Failed to add server event callback" msgstr "天加服务器事件复查失败" #: daemon/libvirtd.c:573 #, c-format msgid "getaddrinfo: %s\n" msgstr "getaddrinfo: %s\n" #: daemon/libvirtd.c:583 #, c-format msgid "socket: %s" msgstr "socket: %s" #: daemon/libvirtd.c:592 #, c-format msgid "bind: %s" msgstr "bind: %s" #: daemon/libvirtd.c:599 #, c-format msgid "listen: %s" msgstr "listen: %s" #: daemon/libvirtd.c:643 #, c-format msgid "remoteListenTCP: calloc: %s" msgstr "remoteListenTCP: calloc: %s" #: daemon/libvirtd.c:674 #, c-format msgid "remoteListenTCP: listen: %s" msgstr "remoteListenTCP: listen: %s" #: daemon/libvirtd.c:768 msgid "Resulting path too long for buffer in qemudInitPaths()" msgstr "对于 qemudInitPaths() 中的缓冲解析路径过长" #: daemon/libvirtd.c:780 msgid "Failed to allocate struct qemud_server" msgstr "建立 qemud_server 时分配内存失败" #: daemon/libvirtd.c:785 daemon/libvirtd.c:1274 src/conf/domain_conf.c:561 #: src/conf/interface_conf.c:1227 src/conf/network_conf.c:173 #: src/conf/node_device_conf.c:174 src/conf/storage_conf.c:1379 #: src/openvz/openvz_conf.c:461 src/qemu/qemu_driver.c:431 #: src/remote/remote_driver.c:968 src/remote/remote_driver.c:6754 #: src/remote/remote_driver.c:6933 src/remote/remote_driver.c:7116 #: src/test/test_driver.c:327 src/test/test_driver.c:564 msgid "cannot initialize mutex" msgstr "无法初始化 mutex" #: daemon/libvirtd.c:789 msgid "cannot initialize condition variable" msgstr "无法初始化条件变量" #: daemon/libvirtd.c:798 msgid "Failed to initialize event system" msgstr "初始化事件系统失败" #: daemon/libvirtd.c:892 #, c-format msgid "Failed to initialize SASL authentication %s" msgstr "初始化 SASL 验证 %s 失败" #: daemon/libvirtd.c:910 #, c-format msgid "Failed to connect to system bus for PolicyKit auth: %s" msgstr "为 PolicyKit auth: %s 连接到系统总线失败" #: daemon/libvirtd.c:1022 #, c-format msgid "remoteInitializeTLSSession: %s" msgstr "remoteInitializeTLSSession: %s" #: daemon/libvirtd.c:1038 #, c-format msgid "remoteCheckDN: gnutls_x509_cert_get_dn: %s" msgstr "remoteCheckDN: gnutls_x509_cert_get_dn: %s" #: daemon/libvirtd.c:1055 #, c-format msgid "remoteCheckDN: failed: client DN is %s" msgstr "remoteCheckDN: failed: client DN is %s" #: daemon/libvirtd.c:1070 #, c-format msgid "remoteCheckCertificate: verify failed: %s" msgstr "remoteCheckCertificate：验证失败： %s" #: daemon/libvirtd.c:1077 msgid "remoteCheckCertificate: the client certificate is not trusted." msgstr "remoteCheckCertificate：客户端证书不可信。" #: daemon/libvirtd.c:1081 msgid "remoteCheckCertificate: the client certificate has unknown issuer." msgstr "remoteCheckCertificate：客户端证书中有未知发行者。" #: daemon/libvirtd.c:1085 msgid "remoteCheckCertificate: the client certificate has been revoked." msgstr "remoteCheckCertificate：客户端证书已经被吊销。" #: daemon/libvirtd.c:1090 msgid "" "remoteCheckCertificate: the client certificate uses an insecure algorithm." msgstr "remoteCheckCertificate：客户端证书使用了不安全算法。" #: daemon/libvirtd.c:1098 msgid "remoteCheckCertificate: certificate is not X.509" msgstr "remoteCheckCertificate：证书不是 X.509" #: daemon/libvirtd.c:1103 msgid "remoteCheckCertificate: no peers" msgstr "remoteCheckCertificate：无同等证书" #: daemon/libvirtd.c:1113 msgid "remoteCheckCertificate: gnutls_x509_crt_init failed" msgstr "remoteCheckCertificate: gnutls_x509_crt_init failed" #: daemon/libvirtd.c:1123 msgid "remoteCheckCertificate: the client certificate has expired" msgstr "remoteCheckCertificate：客户端证书过期" #: daemon/libvirtd.c:1130 msgid "remoteCheckCertificate: the client certificate is not yet activated" msgstr "remoteCheckCertificate：客户端证书还没有激活" #: daemon/libvirtd.c:1139 msgid "" "remoteCheckCertificate: client's Distinguished Name is not on the list of " "allowed clients (tls_allowed_dn_list). Use 'openssl x509 -in clientcert.pem " "-text' to view the Distinguished Name field in the client certificate, or " "run this daemon with --verbose option." msgstr "" "remoteCheckCertificate：客户端的不同名称没有列在允许的客户端列表中" "（tls_allowed_dn_list）。请使用 'openssl x509 -in clientcert.pem -text' 查看" "客户端证书中的 Distinguished Name 字段，或者运行带 --verbose 选项的守护进程。" #: daemon/libvirtd.c:1157 msgid "remoteCheckCertificate: failed to verify client's certificate" msgstr "remoteCheckCertificate：验证客户端证书失败" #: daemon/libvirtd.c:1160 msgid "" "remoteCheckCertificate: tls_no_verify_certificate is set so the bad " "certificate is ignored" msgstr "" "remoteCheckCertificate：设定了 tls_no_verify_certificate，因此会忽略坏证书" #: daemon/libvirtd.c:1166 msgid "client had unexpected data pending tx after access check" msgstr "客户端需要在访问检查后待处理的 tx 数据" #: daemon/libvirtd.c:1194 #, c-format msgid "Failed to verify client credentials: %s" msgstr "验证客户端证书失败： %s" #: daemon/libvirtd.c:1221 #, c-format msgid "Failed to accept connection: %s" msgstr "接受连接失败： %s " #: daemon/libvirtd.c:1227 #, c-format msgid "Too many active clients (%d), dropping connection" msgstr "太多活跃的客户端（%d），减少连接" #: daemon/libvirtd.c:1233 msgid "Out of memory allocating clients" msgstr "分配客户端时内存溢出" #: daemon/libvirtd.c:1307 #, c-format msgid "Turn off polkit auth for privileged client %d" msgstr "为特权客户 %d 关闭 polkit 验证" #: daemon/libvirtd.c:1346 daemon/libvirtd.c:1974 #, c-format msgid "TLS handshake failed: %s" msgstr "TLS 对话失败： %s" #: daemon/libvirtd.c:1525 daemon/libvirtd.c:1775 #, c-format msgid "unexpected negative length request %lld" msgstr "以外负数长度请求 %lld" #: daemon/libvirtd.c:1541 #, c-format msgid "read: %s" msgstr "read: %s" #: daemon/libvirtd.c:1554 #, c-format msgid "gnutls_record_recv: %s" msgstr "gnutls_record_recv: %s" #: daemon/libvirtd.c:1616 #, c-format msgid "failed to decode SASL data %s" msgstr "解码 SASL 数据 %s 失败" #: daemon/libvirtd.c:1786 #, c-format msgid "write: %s" msgstr "write: %s" #: daemon/libvirtd.c:1797 #, c-format msgid "gnutls_record_send: %s" msgstr "gnutls_record_send: %s" #: daemon/libvirtd.c:1846 #, c-format msgid "failed to encode SASL data %s" msgstr "编码 SASL 数据 %s 失败" #: daemon/libvirtd.c:2122 #, c-format msgid "Signal handler reported %d errors: last error: %s" msgstr "信号处理器报告 %d 错误：上个错误：%s" #: daemon/libvirtd.c:2180 msgid "Failed to register shutdown timeout" msgstr "注册关机超时失败" #: daemon/libvirtd.c:2189 msgid "Failed to allocate workers" msgstr "分配 worker 失败" #: daemon/libvirtd.c:2349 daemon/libvirtd.c:2368 #, c-format msgid "failed to allocate memory for %s config list" msgstr "为 %s 配置列表分配内存失败" #: daemon/libvirtd.c:2355 daemon/libvirtd.c:2385 #, c-format msgid "failed to allocate memory for %s config list value" msgstr "为 %s 配置列表值分配内存失败" #: daemon/libvirtd.c:2373 daemon/libvirtd.c:2396 #, c-format msgid "remoteReadConfigFile: %s: %s: must be a string or list of strings\n" msgstr "remoteReadConfigFile: %s: %s: 必须是一个字符串或者一组字符串\n" #: daemon/libvirtd.c:2412 #, c-format msgid "remoteReadConfigFile: %s: %s: invalid type: got %s; expected %s\n" msgstr "remoteReadConfigFile: %s: %s: 无效类型：得到 %s，应该是 %s\n" #: daemon/libvirtd.c:2434 #, c-format msgid "remoteReadConfigFile: %s\n" msgstr "remoteReadConfigFile: %s\n" #: daemon/libvirtd.c:2477 #, c-format msgid "remoteReadConfigFile: %s: %s: unsupported auth %s\n" msgstr "remoteReadConfigFile: %s: %s: 不支持的验证方法 %s\n" #: daemon/libvirtd.c:2646 msgid "Cannot set group when not running as root" msgstr "不是以根身份运行时无法设定组群" #: daemon/libvirtd.c:2656 msgid "Failed to allocate memory for buffer" msgstr "为缓冲区分配内存失败" #: daemon/libvirtd.c:2665 msgid "Failed to reallocate enough memory for buffer" msgstr "为缓冲区分配足够内存失败" #: daemon/libvirtd.c:2671 #, c-format msgid "Failed to lookup group '%s'" msgstr "查找组群 '%s' 失败" #: daemon/libvirtd.c:2684 daemon/libvirtd.c:2694 #, c-format msgid "Failed to parse mode '%s'" msgstr "解析模式 '%s' 失败" #: daemon/libvirtd.c:2772 msgid "additional privileges are required\n" msgstr "需要额外特权\n" #: daemon/libvirtd.c:2778 msgid "failed to set reduced privileges\n" msgstr "设置削弱的权限失败\n" #: daemon/libvirtd.c:2927 #, c-format msgid "Failed to fork as daemon: %s" msgstr "用 fork 作为守护进程失败：%s" #: daemon/libvirtd.c:2950 #, c-format msgid "Failed to create pipe: %s" msgstr "创建管道失败：%s" #: daemon/libvirtd.c:2975 msgid "unable to create rundir" msgstr "无法生成 rundir" #: daemon/libvirtd.c:3002 #, c-format msgid "Failed to change group ownership of %s" msgstr "更改 %s 组群所有者失败" #: daemon/libvirtd.c:3010 msgid "Failed to register callback for signal pipe" msgstr "为信号管道注册回叫失败" #: daemon/remote.c:142 msgid "connection already open" msgstr "连接已经打开" #: daemon/remote.c:173 msgid "connection not open" msgstr "连接未打开" #: daemon/remote.c:234 msgid "out of memory in strdup" msgstr "strdup 中有内存溢出" #: daemon/remote.c:387 msgid "maxCells > REMOTE_NODE_MAX_CELLS" msgstr "maxCells > REMOTE_NODE_MAX_CELLS" #: daemon/remote.c:481 daemon/remote.c:565 msgid "nparams too large" msgstr "nparmas 过大" #: daemon/remote.c:530 msgid "unknown type" msgstr "未知类型" #: daemon/remote.c:576 #, fuzzy, c-format msgid "Field %s too big for destination" msgstr "获得节点信息失败" #: daemon/remote.c:718 daemon/remote.c:769 msgid "size > maximum buffer size" msgstr "大小 > 最大缓冲大小" #: daemon/remote.c:1253 msgid "maxinfo > REMOTE_VCPUINFO_MAX" msgstr "maxinfo > REMOTE_VCPUINFO_MAX" #: daemon/remote.c:1259 msgid "maxinfo * maplen > REMOTE_CPUMAPS_MAX" msgstr "maxinfo * maplen > REMOTE_CPUMAPS_MAX" #: daemon/remote.c:1549 msgid "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" msgstr "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" #: daemon/remote.c:1676 msgid "cpumap_len > REMOTE_CPUMAP_MAX" msgstr "cpumap_len > REMOTE_CPUMAP_MAX" #: daemon/remote.c:2008 daemon/remote.c:2075 daemon/remote.c:3470 msgid "maxnames > REMOTE_NETWORK_NAME_LIST_MAX" msgstr "maxnames > REMOTE_NETWORK_NAME_LIST_MAX" #: daemon/remote.c:2042 msgid "maxids > REMOTE_DOMAIN_ID_LIST_MAX" msgstr "maxids > REMOTE_DOMAIN_ID_LIST_MAX" #: daemon/remote.c:2461 msgid "maxnames > REMOTE_INTERFACE_NAME_LIST_MAX" msgstr "maxnames > REMOTE_INTERFACE_NAME_LIST_MAX" #: daemon/remote.c:2514 msgid "maxnames > REMOTE_DEFINED_INTERFACE_NAME_LIST_MAX" msgstr "maxnames > REMOTE_DEFINED_INTERFACE_NAME_LIST_MAX" #: daemon/remote.c:2749 src/remote/remote_driver.c:5703 #, c-format msgid "Cannot resolve address %d: %s" msgstr "无法解析地址 %d：%s" #: daemon/remote.c:2792 msgid "client tried invalid SASL init request" msgstr "客户端尝试无效 SASL 初始化请求" #: daemon/remote.c:2801 #, c-format msgid "failed to get sock address: %s" msgstr "获得套接字地址失败：%s" #: daemon/remote.c:2813 #, c-format msgid "failed to get peer address: %s" msgstr "获得 peer 地址失败：%s" #: daemon/remote.c:2834 #, c-format msgid "sasl context setup failed %d (%s)" msgstr "sasl 环境设置失败 %d（%s）" #: daemon/remote.c:2847 msgid "cannot get TLS cipher size" msgstr "无法获取 TLS 密码长度" #: daemon/remote.c:2856 #, c-format msgid "cannot set SASL external SSF %d (%s)" msgstr "无法设定 SASL 外部 SSF %d（%s）" #: daemon/remote.c:2884 #, c-format msgid "cannot set SASL security props %d (%s)" msgstr "无法设定 SASL 安全支持 %d（%s）" #: daemon/remote.c:2900 #, c-format msgid "cannot list SASL mechanisms %d (%s)" msgstr "无法列出 SASL 机制 %d（%s）" #: daemon/remote.c:2909 msgid "cannot allocate mechlist" msgstr "无法分配 mechlist" #: daemon/remote.c:2940 src/remote/remote_driver.c:6196 #, c-format msgid "cannot query SASL ssf on connection %d (%s)" msgstr "无法在连接 %d（%s）是查询 SASL" #: daemon/remote.c:2950 #, c-format msgid "negotiated SSF %d was not strong enough" msgstr "协商 SSF %d 不够强大" #: daemon/remote.c:2979 #, c-format msgid "cannot query SASL username on connection %d (%s)" msgstr "在连接到 %d（%s）时不能查询 SASL 用户名" #: daemon/remote.c:2987 msgid "no client username was found" msgstr "没有找到客户端用户名" #: daemon/remote.c:2997 msgid "out of memory copying username" msgstr "复制用户名时内存溢出" #: daemon/remote.c:3016 #, c-format msgid "SASL client %s not allowed in whitelist" msgstr "在白名单中不允许 SASL 客户端 %s" #: daemon/remote.c:3047 daemon/remote.c:3135 msgid "client tried invalid SASL start request" msgstr "客户端尝试无效 SASL 启动请求" #: daemon/remote.c:3062 #, c-format msgid "sasl start failed %d (%s)" msgstr "sasl 启动失败 %d（%s）" #: daemon/remote.c:3069 #, c-format msgid "sasl start reply data too long %d" msgstr "sasl 启动回应数据过长 %d" #: daemon/remote.c:3149 #, c-format msgid "sasl step failed %d (%s)" msgstr "sasl 步骤失败 %d（%s）" #: daemon/remote.c:3157 #, c-format msgid "sasl step reply data too long %d" msgstr "sasl 步骤回应数据过长 %d" #: daemon/remote.c:3214 msgid "client tried unsupported SASL init request" msgstr "客户端尝试不支持的 SASL 初始请求" #: daemon/remote.c:3228 msgid "client tried unsupported SASL start request" msgstr "客户端尝试不支持的 SASL 启动请求" #: daemon/remote.c:3242 msgid "client tried unsupported SASL step request" msgstr "客户端尝试不支持的 SASL 步骤请求" #: daemon/remote.c:3284 daemon/remote.c:3353 msgid "client tried invalid PolicyKit init request" msgstr "客户端尝试无效 PolicyKit 初始请求" #: daemon/remote.c:3289 daemon/remote.c:3358 msgid "cannot get peer socket identity" msgstr "无法获得同级套接字身份" #: daemon/remote.c:3293 daemon/remote.c:3362 #, c-format msgid "Checking PID %d running as %d" msgstr "以 %d 运行时检查 PID %d" #: daemon/remote.c:3297 #, c-format msgid "Caller PID was too large %d" msgstr "调用程序 PID 过大 %d" #: daemon/remote.c:3302 #, c-format msgid "Cannot invoke %s" msgstr "无法调用 %s" #: daemon/remote.c:3306 #, c-format msgid "Policy kit denied action %s from pid %d, uid %d, result: %d\n" msgstr "策略组件拒绝动作 %s 来自 pid %d，uid %d，结果：%d\n" #: daemon/remote.c:3310 #, c-format msgid "Policy allowed action %s from pid %d, uid %d" msgstr "策略组件允许动作 %s 来自 pid %d，uid %d" #: daemon/remote.c:3366 #, c-format msgid "Failed to lookup policy kit caller: %s" msgstr "检查策略套件调用程序失败：%s" #: daemon/remote.c:3373 #, c-format msgid "Failed to create polkit action %s\n" msgstr "创建 polkit 行动 %s 失败\n" #: daemon/remote.c:3383 #, c-format msgid "Failed to create polkit context %s\n" msgstr "创建 polkit 环境 %s 失败\n" #: daemon/remote.c:3401 #, c-format msgid "Policy kit failed to check authorization %d %s" msgstr "策略套件无法检查验证 %d %s" #: daemon/remote.c:3415 #, c-format msgid "Policy kit denied action %s from pid %d, uid %d, result: %s\n" msgstr "策略组件拒绝动作 %s 来自 pid %d，uid %d，结果：%s\n" #: daemon/remote.c:3420 #, c-format msgid "Policy allowed action %s from pid %d, uid %d, result %s" msgstr "策略组件允许动作 %s 来自 pid %d，uid %d，结果 %s" #: daemon/remote.c:3446 msgid "client tried unsupported PolicyKit init request" msgstr "客户端尝试不支持的 PolicyKit 初始请求" #: daemon/remote.c:3504 msgid "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX" msgstr "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX" #: daemon/remote.c:3990 msgid "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX" msgstr "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX" #: daemon/remote.c:4354 daemon/remote.c:4525 msgid "maxnames > REMOTE_NODE_DEVICE_NAME_LIST_MAX" msgstr "maxnames > REMOTE_NODE_DEVICE_NAME_LIST_MAX" #: daemon/remote.c:4417 daemon/remote.c:4448 daemon/remote.c:4490 #: daemon/remote.c:4519 daemon/remote.c:4562 daemon/remote.c:4589 #: daemon/remote.c:4616 daemon/remote.c:4666 msgid "node_device not found" msgstr "未找到节点设备（_d）" #: daemon/remote.c:4810 msgid "maxuuids > REMOTE_SECRET_UUID_LIST_MAX" msgstr "maxuuids > REMOTE_SECRET_UUID_LIST_MAX" #: daemon/stream.c:113 msgid "stream had unexpected termination" msgstr "" #: daemon/stream.c:115 msgid "stream had I/O failure" msgstr "" #: daemon/stream.c:468 msgid "stream aborted at client request" msgstr "" #: daemon/stream.c:471 #, fuzzy, c-format msgid "stream aborted with unexpected status %d" msgstr "带退出状态 %d 的 lvs 命令失败" #: src/conf/domain_conf.c:669 #, c-format msgid "unknown disk type '%s'" msgstr "未知磁盘类型 '%s'" #: src/conf/domain_conf.c:734 #, c-format msgid "unknown disk device '%s'" msgstr "未知磁盘设备 '%s'" #: src/conf/domain_conf.c:760 #, c-format msgid "Invalid floppy device name: %s" msgstr "无效软盘设备名称：%s" #: src/conf/domain_conf.c:775 #, c-format msgid "Invalid harddisk device name: %s" msgstr "无效硬盘设备名称：%s" #: src/conf/domain_conf.c:782 #, c-format msgid "unknown disk bus type '%s'" msgstr "未知磁盘总线类型 '%s'" #: src/conf/domain_conf.c:807 #, c-format msgid "Invalid bus type '%s' for floppy disk" msgstr "软盘的无效总线类型 '%s' " #: src/conf/domain_conf.c:813 #, c-format msgid "Invalid bus type '%s' for disk" msgstr "软盘的无效总线类型 '%s' " #: src/conf/domain_conf.c:820 #, c-format msgid "unknown disk cache mode '%s'" msgstr "未知磁盘缓存模式类型 '%s'" #: src/conf/domain_conf.c:830 src/conf/domain_conf.c:1070 #: src/conf/domain_conf.c:2123 #, c-format msgid "Unable to parse devaddr parameter '%s'" msgstr "无法解析设备地址参数 '%s'" #: src/conf/domain_conf.c:892 #, c-format msgid "unknown filesystem type '%s'" msgstr "未知文件系统类型 '%s'" #: src/conf/domain_conf.c:991 #, c-format msgid "unknown interface type '%s'" msgstr "未知接口类型 '%s'" #: src/conf/domain_conf.c:1082 msgid "Cannot parse 'vlan' attribute" msgstr "无法解析 'vlan' 属性" #: src/conf/domain_conf.c:1090 msgid "" "No 'network' attribute specified with " msgstr "没有使用 指定 ‘networking’属性" #: src/conf/domain_conf.c:1116 #, fuzzy msgid "" "No 'bridge' attribute specified with " msgstr "没有使用 指定 ‘dev’属性" #: src/conf/domain_conf.c:1136 msgid "No 'port' attribute specified with socket interface" msgstr "没有使用套接字接口指定 ‘port’属性" #: src/conf/domain_conf.c:1141 msgid "Cannot parse 'port' attribute with socket interface" msgstr "无法使用套接自接口解析 'port' 属性" #: src/conf/domain_conf.c:1149 msgid "No 'address' attribute specified with socket interface" msgstr "没有使用套接自接口指定的 'address' 属性" #: src/conf/domain_conf.c:1161 msgid "" "No 'name' attribute specified with " msgstr "没有指定为 的 'name' 属性" #: src/conf/domain_conf.c:1185 msgid "Model name contains invalid characters" msgstr "模块名称中含有无效字符" #: src/conf/domain_conf.c:1317 #, c-format msgid "Unknown source mode '%s'" msgstr "未知的来源模式类型 '%s'" #: src/conf/domain_conf.c:1349 src/conf/domain_conf.c:1433 msgid "Missing source path attribute for char device" msgstr "缺少字符设备的源路径属性" #: src/conf/domain_conf.c:1366 src/conf/domain_conf.c:1383 msgid "Missing source host attribute for char device" msgstr "缺少字符设备的源主机属性" #: src/conf/domain_conf.c:1371 src/conf/domain_conf.c:1388 #: src/conf/domain_conf.c:1415 msgid "Missing source service attribute for char device" msgstr "缺少字符设备的源服务属性" #: src/conf/domain_conf.c:1406 #, c-format msgid "Unknown protocol '%s'" msgstr "未知的协议 '%s'" #: src/conf/domain_conf.c:1486 msgid "missing input device type" msgstr "缺少输入设备类型" #: src/conf/domain_conf.c:1492 #, c-format msgid "unknown input device type '%s'" msgstr "未知输入设备类型 '%s'" #: src/conf/domain_conf.c:1499 #, c-format msgid "unknown input bus type '%s'" msgstr "未知输入总线类型 '%s'" #: src/conf/domain_conf.c:1507 #, c-format msgid "ps2 bus does not support %s input device" msgstr "ps2 总线不支持 %s 输入设备" #: src/conf/domain_conf.c:1513 src/conf/domain_conf.c:1520 #, c-format msgid "unsupported input bus %s" msgstr "不支持的输入总线 %s" #: src/conf/domain_conf.c:1525 #, c-format msgid "xen bus does not support %s input device" msgstr "xen 总线不支持 %s 输入设备" #: src/conf/domain_conf.c:1570 msgid "missing graphics device type" msgstr "缺少图形设备类型" #: src/conf/domain_conf.c:1576 #, c-format msgid "unknown graphics device type '%s'" msgstr "未知图形设备类型 '%s'" #: src/conf/domain_conf.c:1587 #, c-format msgid "cannot parse vnc port %s" msgstr "无法解析 vnc 端口 %s" #: src/conf/domain_conf.c:1625 src/conf/domain_conf.c:1687 #, c-format msgid "unknown fullscreen value '%s'" msgstr "未知全屏值 '%s'" #: src/conf/domain_conf.c:1643 #, c-format msgid "cannot parse rdp port %s" msgstr "无法解析 rdp 端口 %s" #: src/conf/domain_conf.c:1726 #, c-format msgid "unknown sound model '%s'" msgstr "未知声音模式类型 '%s'" #: src/conf/domain_conf.c:1870 #, c-format msgid "unknown video model '%s'" msgstr "未知的显示模式类型 '%s'" #: src/conf/domain_conf.c:1876 msgid "missing video model and cannot determine default" msgstr "缺少视频模式且无法确定默认模式" #: src/conf/domain_conf.c:1884 #, c-format msgid "cannot parse video ram '%s'" msgstr "无法解析显存 '%s'" #: src/conf/domain_conf.c:1894 #, c-format msgid "cannot parse video heads '%s'" msgstr "无法解析影像头 '%s'" #: src/conf/domain_conf.c:1941 #, c-format msgid "cannot parse vendor id %s" msgstr "无法解析零售商 id %s" #: src/conf/domain_conf.c:1948 msgid "usb vendor needs id" msgstr "usb 零售商需要 id" #: src/conf/domain_conf.c:1959 #, c-format msgid "cannot parse product %s" msgstr "无法解析产品 %s" #: src/conf/domain_conf.c:1967 msgid "usb product needs id" msgstr "usb 产品需要 id" #: src/conf/domain_conf.c:1978 src/conf/domain_conf.c:2070 #, c-format msgid "cannot parse bus %s" msgstr "无法解析总线 %s" #: src/conf/domain_conf.c:1985 msgid "usb address needs bus id" msgstr "usb 地址需要总线 id" #: src/conf/domain_conf.c:1994 #, c-format msgid "cannot parse device %s" msgstr "无法解析设备 %s" #: src/conf/domain_conf.c:2002 msgid "usb address needs device id" msgstr "usb 地址需要设备 id" #: src/conf/domain_conf.c:2007 #, c-format msgid "unknown usb source type '%s'" msgstr "未知 usb 源类型 '%s'" #: src/conf/domain_conf.c:2017 msgid "vendor cannot be 0." msgstr "零售商不可为 0。" #: src/conf/domain_conf.c:2023 msgid "missing vendor" msgstr "缺少经销商" #: src/conf/domain_conf.c:2028 msgid "missing product" msgstr "缺少产品" #: src/conf/domain_conf.c:2057 #, c-format msgid "cannot parse domain %s" msgstr "无法接续域 %s" #: src/conf/domain_conf.c:2077 msgid "pci address needs bus id" msgstr "pci 地址需要总线 id" #: src/conf/domain_conf.c:2086 #, c-format msgid "cannot parse slot %s" msgstr "无法解析插槽 %s" #: src/conf/domain_conf.c:2094 msgid "pci address needs slot id" msgstr "pci 地址需要插槽 id" #: src/conf/domain_conf.c:2103 #, c-format msgid "cannot parse function %s" msgstr "无法解析功能 %s" #: src/conf/domain_conf.c:2111 msgid "pci address needs function id" msgstr "pci 地址需要功能 id" #: src/conf/domain_conf.c:2130 #, c-format msgid "unknown pci source type '%s'" msgstr "未知 pci 源类型 '%s'" #: src/conf/domain_conf.c:2163 #, c-format msgid "unknown hostdev mode '%s'" msgstr "未知 hostdev 模式 '%s'" #: src/conf/domain_conf.c:2174 #, c-format msgid "unknown host device type '%s'" msgstr "未知主机设备类型 '%s'" #: src/conf/domain_conf.c:2179 msgid "missing type in hostdev" msgstr "hostdev 中缺少类型" #: src/conf/domain_conf.c:2207 #, c-format msgid "unknown node %s" msgstr "未知节点 %s" #: src/conf/domain_conf.c:2238 #, c-format msgid "unknown lifecycle action %s" msgstr "未知周期动作 %s" #: src/conf/domain_conf.c:2262 msgid "missing security type" msgstr "缺少安全性类型" #: src/conf/domain_conf.c:2269 msgid "invalid security type" msgstr "无效安全性类型 %s" #: src/conf/domain_conf.c:2282 msgid "missing security model" msgstr "缺少安全性模式" #: src/conf/domain_conf.c:2291 msgid "security label is missing" msgstr "缺少安全性标签" #: src/conf/domain_conf.c:2305 msgid "security imagelabel is missing" msgstr "缺少安全性映像标签" #: src/conf/domain_conf.c:2338 src/conf/domain_conf.c:3226 #: src/conf/domain_conf.c:3267 src/conf/domain_conf.c:3339 #: src/conf/interface_conf.c:799 src/conf/interface_conf.c:839 #: src/conf/network_conf.c:524 src/conf/network_conf.c:564 #: src/conf/node_device_conf.c:1190 src/conf/secret_conf.c:241 #: src/conf/storage_conf.c:717 src/conf/storage_conf.c:1127 msgid "missing root element" msgstr "缺少根元素" #: src/conf/domain_conf.c:2378 msgid "unknown device type" msgstr "未知设备类型" #: src/conf/domain_conf.c:2459 msgid "unknown virt type" msgstr "未知 virt 类型" #: src/conf/domain_conf.c:2470 #, c-format msgid "no emulator for domain %s os type %s on architecture %s" msgstr "在构架 %s 中没有用于域 %s os 类型 %s 的模拟器" #: src/conf/domain_conf.c:2505 msgid "missing domain type attribute" msgstr "缺少域类型属性" #: src/conf/domain_conf.c:2511 #, c-format msgid "invalid domain type %s" msgstr "无效域类型 %s" #: src/conf/domain_conf.c:2527 src/conf/network_conf.c:379 #: src/conf/secret_conf.c:165 msgid "Failed to generate UUID" msgstr "生成 UUID 失败" #: src/conf/domain_conf.c:2533 src/conf/network_conf.c:386 #: src/conf/secret_conf.c:171 src/conf/storage_conf.c:506 msgid "malformed uuid element" msgstr "畸形的 uuid 元素" #: src/conf/domain_conf.c:2545 msgid "missing memory element" msgstr "缺少内存元素" #: src/conf/domain_conf.c:2582 #, c-format msgid "unexpected feature %s" msgstr "非期望的特性 %s" #: src/conf/domain_conf.c:2622 msgid "no OS type" msgstr "没有操作系统类型" #: src/conf/domain_conf.c:2650 #, c-format msgid "os type '%s' & arch '%s' combination is not supported" msgstr "不支持 os 类型 '%s' 和 arch '%s' 组合" #: src/conf/domain_conf.c:2658 src/xen/xm_internal.c:714 #, c-format msgid "no supported architecture for os type '%s'" msgstr "os 类型 '%s' 不支持的构架" #: src/conf/domain_conf.c:2709 msgid "cannot extract boot device" msgstr "无法提取引导设备" #: src/conf/domain_conf.c:2717 msgid "missing boot device" msgstr "缺少引导设备" #: src/conf/domain_conf.c:2722 #, c-format msgid "unknown boot device '%s'" msgstr "未知引导设备 '%s'" #: src/conf/domain_conf.c:2747 msgid "cannot extract disk devices" msgstr "无法提取磁盘设备" #: src/conf/domain_conf.c:2766 msgid "cannot extract filesystem devices" msgstr "无法提取文件系统设备" #: src/conf/domain_conf.c:2785 msgid "cannot extract network devices" msgstr "无法提取网络设备" #: src/conf/domain_conf.c:2806 msgid "cannot extract parallel devices" msgstr "无法提取并口设备" #: src/conf/domain_conf.c:2826 msgid "cannot extract serial devices" msgstr "无法提取串口设备" #: src/conf/domain_conf.c:2876 msgid "cannot extract input devices" msgstr "无法提取输入设备" #: src/conf/domain_conf.c:2911 msgid "cannot extract graphics devices" msgstr "无法提取图形设备" #: src/conf/domain_conf.c:2955 msgid "cannot extract sound devices" msgstr "无法提取声音设备" #: src/conf/domain_conf.c:2985 msgid "cannot extract video devices" msgstr "无法获取显示设备" #: src/conf/domain_conf.c:3010 msgid "cannot determine default video type" msgstr "无法确定默认视频类型" #: src/conf/domain_conf.c:3026 msgid "cannot extract host devices" msgstr "无法提取主机设备" #: src/conf/domain_conf.c:3078 msgid "no domain config" msgstr "节点域配置" #: src/conf/domain_conf.c:3092 msgid "missing domain state" msgstr "缺失域状态" #: src/conf/domain_conf.c:3097 #, c-format msgid "invalid domain state '%s'" msgstr "无效的域状态 '%s'" #: src/conf/domain_conf.c:3105 msgid "invalid pid" msgstr "无效 pid" #: src/conf/domain_conf.c:3118 msgid "no monitor path" msgstr "没有监视器路径" #: src/conf/domain_conf.c:3139 #, c-format msgid "unsupported monitor type '%s'" msgstr "不支持的显示器类型 '%s'" #: src/conf/domain_conf.c:3189 src/conf/interface_conf.c:764 #: src/conf/network_conf.c:489 src/conf/node_device_conf.c:1142 #: src/conf/secret_conf.c:203 src/conf/storage_conf.c:646 #, c-format msgid "at line %d: %s" msgstr "在行 %d： %s" #: src/conf/domain_conf.c:3220 src/conf/domain_conf.c:3261 #: src/conf/domain_conf.c:3333 src/conf/interface_conf.c:793 #: src/conf/interface_conf.c:833 src/conf/network_conf.c:518 #: src/conf/network_conf.c:558 src/conf/node_device_conf.c:1184 #: src/conf/secret_conf.c:234 src/conf/storage_conf.c:710 #: src/conf/storage_conf.c:1120 msgid "failed to parse xml document" msgstr "解析 xml 文档失败" #: src/conf/domain_conf.c:3291 src/conf/domain_conf.c:3362 #: src/conf/interface_conf.c:732 src/conf/network_conf.c:586 #: src/conf/node_device_conf.c:1111 src/conf/secret_conf.c:117 msgid "incorrect root element" msgstr "不正确的根元素" #: src/conf/domain_conf.c:3572 msgid "topology cpuset syntax error" msgstr "拓扑 cpu 组语法错误" #: src/conf/domain_conf.c:3586 #, c-format msgid "unexpected lifecycle type %d" msgstr "意外的周期类型 %d" #: src/conf/domain_conf.c:3609 #, c-format msgid "unexpected disk type %d" msgstr "意外的磁盘类型 %d" #: src/conf/domain_conf.c:3614 #, c-format msgid "unexpected disk device %d" msgstr "意外的磁盘设备 %d" #: src/conf/domain_conf.c:3619 #, c-format msgid "unexpected disk bus %d" msgstr "意外的磁盘总线 %d" #: src/conf/domain_conf.c:3624 #, c-format msgid "unexpected disk cache mode %d" msgstr "意外的磁盘缓存模式 %d" #: src/conf/domain_conf.c:3688 #, c-format msgid "unexpected filesystem type %d" msgstr "意外的文件系统类型 %d" #: src/conf/domain_conf.c:3740 src/conf/domain_conf.c:4031 #, c-format msgid "unexpected net type %d" msgstr "意外的网络类型 %d" #: src/conf/domain_conf.c:3838 #, c-format msgid "unexpected char type %d" msgstr "意外的字符类型 %d" #: src/conf/domain_conf.c:3938 src/xen/xend_internal.c:5566 #, c-format msgid "unexpected sound model %d" msgstr "意外的声音模式 %d" #: src/conf/domain_conf.c:3970 #, c-format msgid "unexpected video model %d" msgstr "意外的影像模式 %d" #: src/conf/domain_conf.c:4004 src/xen/xend_internal.c:5591 #, c-format msgid "unexpected input type %d" msgstr "意外的输入类型 %d" #: src/conf/domain_conf.c:4009 #, c-format msgid "unexpected input bus type %d" msgstr "意外的输入总线类型 %d" #: src/conf/domain_conf.c:4127 #, c-format msgid "unexpected hostdev mode %d" msgstr "意外的 hostdev 模式 %d" #: src/conf/domain_conf.c:4134 #, c-format msgid "unexpected hostdev type %d" msgstr "意外的 hostdev 类型 %d" #: src/conf/domain_conf.c:4191 #, c-format msgid "unexpected domain type %d" msgstr "意外的域类型 %d" #: src/conf/domain_conf.c:4284 #, c-format msgid "unexpected boot device type %d" msgstr "意外的引导设备类型 %d" #: src/conf/domain_conf.c:4302 #, c-format msgid "unexpected feature %d" msgstr "意外的特性 %d" #: src/conf/domain_conf.c:4512 src/conf/network_conf.c:713 #, c-format msgid "cannot create config directory '%s'" msgstr "无法生成配置目录 '%s'" #: src/conf/domain_conf.c:4521 src/conf/network_conf.c:722 #, c-format msgid "cannot create config file '%s'" msgstr "无法生成配置文件 '%s'" #: src/conf/domain_conf.c:4529 src/conf/network_conf.c:730 #, c-format msgid "cannot write config file '%s'" msgstr "无法写入配置文件 '%s'" #: src/conf/domain_conf.c:4536 src/conf/network_conf.c:737 #, c-format msgid "cannot save config file '%s'" msgstr "无法保存配置文件 '%s'" #: src/conf/domain_conf.c:4665 #, c-format msgid "unexpected domain %s already exists" msgstr "意外目标 %s 已存在" #: src/conf/domain_conf.c:4708 src/conf/network_conf.c:839 #: src/conf/storage_conf.c:1456 #, c-format msgid "Failed to open dir '%s'" msgstr "打开目录 '%s' 失败" #: src/conf/domain_conf.c:4773 #, c-format msgid "cannot remove config %s" msgstr "无法为删除配置 %s" #: src/conf/interface_conf.c:109 src/conf/interface_conf.c:373 msgid "interface has no name" msgstr "接口无名称" #: src/conf/interface_conf.c:117 msgid "interface mtu value is improper" msgstr "接口 mtu 值不恰当" #: src/conf/interface_conf.c:133 msgid "interface misses the start mode attribute" msgstr "接口缺少启动模式属性" #: src/conf/interface_conf.c:144 #, c-format msgid "unknown interface startmode %s" msgstr "未知的网络接口起始模式 %s" #: src/conf/interface_conf.c:176 #, c-format msgid "unknown bonding mode %s" msgstr "未知的绑定模式类型 %s" #: src/conf/interface_conf.c:197 #, c-format msgid "unknown mii bonding carrier %s" msgstr "未知 mii 绑定载体 %s" #: src/conf/interface_conf.c:220 #, c-format msgid "unknown arp bonding validate %s" msgstr "未知 arp 绑定确认 %s" #: src/conf/interface_conf.c:246 #, c-format msgid "unknown dhcp peerdns value %s" msgstr "未知 dhcp peerdns 值 %s" #: src/conf/interface_conf.c:272 msgid "Invalid ip address prefix value" msgstr "无效的 MAC 地址前缀" #: src/conf/interface_conf.c:297 msgid "interface miss dhcp or ip adressing" msgstr "接口缺少 dhcp 或者 ip 地址" #: src/conf/interface_conf.c:319 msgid "protocol misses the family attribute" msgstr "协议缺少 family 属性" #: src/conf/interface_conf.c:328 #, c-format msgid "unsupported protocol family '%s'" msgstr "不支持的协议 family %s" #: src/conf/interface_conf.c:352 msgid "interface has no type" msgstr "网络界面无类型" #: src/conf/interface_conf.c:366 #, c-format msgid "interface has unsupported type '%s'" msgstr "接口中有不支持的类型 %s" #: src/conf/interface_conf.c:379 #, c-format msgid "vlan %s has no tag" msgstr "vlan %s 无标签" #: src/conf/interface_conf.c:384 #, c-format msgid "vlan %s has interface name" msgstr "vlan %s 有接口名称" #: src/conf/interface_conf.c:420 msgid "bridge has no interfaces" msgstr "桥接未指定网络接口" #: src/conf/interface_conf.c:460 msgid "bond has no interfaces" msgstr "绑定未指定网络接口" #: src/conf/interface_conf.c:506 msgid "bond interface miimon freq missing or invalid" msgstr "绑定接口 miimon freq 缺失或者无效" #: src/conf/interface_conf.c:514 msgid "bond interface miimon downdelay invalid" msgstr "绑定接口 miimon downdelay 无效" #: src/conf/interface_conf.c:523 msgid "bond interface miimon updelay invalid" msgstr "绑定接口 miimon updelay 无效" #: src/conf/interface_conf.c:544 msgid "bond interface arpmon interval missing or invalid" msgstr "绑定接口 arpmon interval 缺失或者无效" #: src/conf/interface_conf.c:553 msgid "bond interface arpmon target missing" msgstr "绑定接口 arpmon 目标缺失" #: src/conf/interface_conf.c:567 msgid "bond interface need miimon or arpmon element" msgstr "绑定接口需要 miimon 或者 arpmon 元素" #: src/conf/interface_conf.c:580 msgid "vlan interface misses the tag attribute" msgstr "vlan 接口缺少 tag 属性" #: src/conf/interface_conf.c:588 msgid "vlan interface misses name attribute" msgstr "vlan 接口缺少 name 属性" #: src/conf/interface_conf.c:605 msgid "interface misses the type attribute" msgstr "网络接口类型属性缺失" #: src/conf/interface_conf.c:611 #, c-format msgid "unknown interface type %s" msgstr "未知的网络接口类型 %s" #: src/conf/interface_conf.c:647 msgid "bridge interface misses the bridge element" msgstr "bridge 接口缺少 bridge 元素" #: src/conf/interface_conf.c:659 #, c-format msgid "bridge interface stp should be on or off got %s" msgstr "" #: src/conf/interface_conf.c:682 msgid "bond interface misses the bond element" msgstr "" #: src/conf/interface_conf.c:703 msgid "vlan interface misses the vlan element" msgstr "" #: src/conf/interface_conf.c:858 #, fuzzy msgid "bare ethernet has no name" msgstr "决定主机名失败" #: src/conf/interface_conf.c:890 #, fuzzy, c-format msgid "bare interface type %d unknown" msgstr "网络界面类型" #: src/conf/interface_conf.c:958 msgid "bond arp monitoring has no target" msgstr "" #: src/conf/interface_conf.c:972 #, c-format msgid "bond monitoring type %d unknown" msgstr "" #: src/conf/interface_conf.c:990 msgid "vlan misses the tag name" msgstr "" #: src/conf/interface_conf.c:1053 msgid "virInterfaceDefFormat unknown startmode" msgstr "" #: src/conf/interface_conf.c:1069 msgid "virInterfaceDefFormat argument problems" msgstr "" #: src/conf/interface_conf.c:1075 #, c-format msgid "unexpected interface type %d" msgstr "意外的网络接口类型 %d" #: src/conf/network_conf.c:263 #, c-format msgid "cannot parse MAC address '%s'" msgstr "无法解析 MAC 地址 '%s'" #: src/conf/network_conf.c:270 #, c-format msgid "cannot use name address '%s'" msgstr "不能使用名称地址 '%s'" #: src/conf/network_conf.c:286 src/conf/network_conf.c:415 #, c-format msgid "cannot parse IP address '%s'" msgstr "无法解析 IP 地址 '%s'" #: src/conf/network_conf.c:421 #, c-format msgid "cannot parse netmask '%s'" msgstr "无法解析子网掩码 '%s'" #: src/conf/network_conf.c:445 msgid "Forwarding requested, but no IPv4 address/netmask provided" msgstr "请求转发，但没有提供 IPv4 地址/子网掩码" #: src/conf/network_conf.c:453 #, c-format msgid "unknown forwarding type '%s'" msgstr "未知转发类型 '%s'" #: src/conf/network_conf.c:797 #, c-format msgid "Network config filename '%s' does not match network name '%s'" msgstr "网络配置文件 '%s' 与网络名称 '%s' 不匹配" #: src/conf/network_conf.c:888 #, c-format msgid "cannot remove config file '%s'" msgstr "无法删除配置文件 '%s'" #: src/conf/network_conf.c:962 #, c-format msgid "Bridge generation exceeded max id %d" msgstr "桥接生成超过最大 id %d" #: src/conf/network_conf.c:981 #, c-format msgid "bridge name '%s' already in use." msgstr "桥接名称 '%s' 已在使用。" #: src/conf/node_device_conf.c:493 #, c-format msgid "no block device path supplied for '%s'" msgstr "没有为 '%s' 提供块设备路径" #: src/conf/node_device_conf.c:506 #, c-format msgid "error parsing storage capabilities for '%s'" msgstr "为 '%s' 解析存储能力出错" #: src/conf/node_device_conf.c:516 #, c-format msgid "missing storage capability type for '%s'" msgstr "缺少 '%s' 的存储能力类型" #: src/conf/node_device_conf.c:536 #, c-format msgid "no removable media size supplied for '%s'" msgstr "没有用于 '%s' 的可移动介质大小" #: src/conf/node_device_conf.c:537 #, c-format msgid "invalid removable media size supplied for '%s'" msgstr "为 '%s' 提供的无效可移动介质大小" #: src/conf/node_device_conf.c:547 #, c-format msgid "unknown storage capability type '%s' for '%s'" msgstr "用于 '%s' 的未知存储能力类型 '%s'" #: src/conf/node_device_conf.c:559 #, c-format msgid "no size supplied for '%s'" msgstr "没有为 '%s' 提供大小" #: src/conf/node_device_conf.c:560 #, c-format msgid "invalid size supplied for '%s'" msgstr "为 '%s' 提供的无效大小" #: src/conf/node_device_conf.c:587 src/conf/node_device_conf.c:635 #, c-format msgid "no SCSI host ID supplied for '%s'" msgstr "没有为 '%s' 提供 SCSI 主机 ID" #: src/conf/node_device_conf.c:588 src/conf/node_device_conf.c:636 #, c-format msgid "invalid SCSI host ID supplied for '%s'" msgstr "'%s' 的无效 SCSI 主机 ID" #: src/conf/node_device_conf.c:593 #, c-format msgid "no SCSI bus ID supplied for '%s'" msgstr "没有为 '%s' 提供 SCSI 总线 ID" #: src/conf/node_device_conf.c:594 #, c-format msgid "invalid SCSI bus ID supplied for '%s'" msgstr "'%s' 的无效 SCSI 总线 ID" #: src/conf/node_device_conf.c:599 #, c-format msgid "no SCSI target ID supplied for '%s'" msgstr "没有为 '%s' 提供 SCSI 目标 ID" #: src/conf/node_device_conf.c:600 #, c-format msgid "invalid SCSI target ID supplied for '%s'" msgstr "'%s' 的无效 SCSI 目标 ID" #: src/conf/node_device_conf.c:605 #, c-format msgid "no SCSI LUN ID supplied for '%s'" msgstr "没有为 '%s' 提供 SCSI LUN ID" #: src/conf/node_device_conf.c:606 #, c-format msgid "invalid SCSI LUN ID supplied for '%s'" msgstr "'%s' 的无效 SCSI LUN ID" #: src/conf/node_device_conf.c:642 #, fuzzy, c-format msgid "error parsing SCSI host capabilities for '%s'" msgstr "为 '%s' 解析存储能力出错" #: src/conf/node_device_conf.c:652 #, fuzzy, c-format msgid "missing SCSI host capability type for '%s'" msgstr "缺少 '%s' 的存储能力类型" #: src/conf/node_device_conf.c:674 #, fuzzy, c-format msgid "no WWNN supplied for '%s'" msgstr "没有为 '%s' 提供大小" #: src/conf/node_device_conf.c:682 #, fuzzy, c-format msgid "no WWPN supplied for '%s'" msgstr "没有为 '%s' 提供大小" #: src/conf/node_device_conf.c:690 #, fuzzy, c-format msgid "unknown SCSI host capability type '%s' for '%s'" msgstr "用于 '%s' 的未知存储能力类型 '%s'" #: src/conf/node_device_conf.c:724 #, c-format msgid "no network interface supplied for '%s'" msgstr "没有为 '%s' 提供网络接口" #: src/conf/node_device_conf.c:739 #, c-format msgid "invalid network type supplied for '%s'" msgstr "'%s' 的无效网络类型" #: src/conf/node_device_conf.c:767 #, c-format msgid "no USB interface number supplied for '%s'" msgstr "没有为 '%s' 提供 USB 接口号" #: src/conf/node_device_conf.c:768 #, c-format msgid "invalid USB interface number supplied for '%s'" msgstr "'%s' 的无效 USB 网络接口号" #: src/conf/node_device_conf.c:773 #, c-format msgid "no USB interface class supplied for '%s'" msgstr "没有为 '%s' 提供 USB 接口类型" #: src/conf/node_device_conf.c:774 #, c-format msgid "invalid USB interface class supplied for '%s'" msgstr "'%s' 的无效 USB 接口类型" #: src/conf/node_device_conf.c:779 #, c-format msgid "no USB interface subclass supplied for '%s'" msgstr "没有为 '%s' 提供 USB 接口亚类" #: src/conf/node_device_conf.c:780 #, c-format msgid "invalid USB interface subclass supplied for '%s'" msgstr "'%s' 的无效 USB 接口亚类" #: src/conf/node_device_conf.c:785 #, c-format msgid "no USB interface protocol supplied for '%s'" msgstr "没有为 '%s' 提供 USB 接口协议" #: src/conf/node_device_conf.c:786 #, c-format msgid "invalid USB interface protocol supplied for '%s'" msgstr "'%s' 的无效 USB 接口协议" #: src/conf/node_device_conf.c:836 #, c-format msgid "no USB bus number supplied for '%s'" msgstr "没有为 '%s' 提供 USB 总线号" #: src/conf/node_device_conf.c:837 #, c-format msgid "invalid USB bus number supplied for '%s'" msgstr "'%s' 的无效 USB 总线号" #: src/conf/node_device_conf.c:842 #, c-format msgid "no USB device number supplied for '%s'" msgstr "没有为 '%s' 提供 USB 设备号" #: src/conf/node_device_conf.c:843 #, c-format msgid "invalid USB device number supplied for '%s'" msgstr "'%s' 的无效 USB 设备号" #: src/conf/node_device_conf.c:848 #, c-format msgid "no USB vendor ID supplied for '%s'" msgstr "没有为 '%s' 提供 USB 经销商 ID" #: src/conf/node_device_conf.c:849 #, c-format msgid "invalid USB vendor ID supplied for '%s'" msgstr "'%s' 的无效 USB 经销商 ID" #: src/conf/node_device_conf.c:854 #, c-format msgid "no USB product ID supplied for '%s'" msgstr "没有为 '%s' 提供 USB 产品 ID" #: src/conf/node_device_conf.c:855 #, c-format msgid "invalid USB product ID supplied for '%s'" msgstr "'%s' 的无效 USB 产品 ID" #: src/conf/node_device_conf.c:882 #, c-format msgid "no PCI domain ID supplied for '%s'" msgstr "没有为 '%s' 提供 PCI 域 ID" #: src/conf/node_device_conf.c:883 #, c-format msgid "invalid PCI domain ID supplied for '%s'" msgstr "'%s' 的无效 PCI 域 ID" #: src/conf/node_device_conf.c:888 #, c-format msgid "no PCI bus ID supplied for '%s'" msgstr "没有为 '%s' 提供 PCI 总线 ID" #: src/conf/node_device_conf.c:889 #, c-format msgid "invalid PCI bus ID supplied for '%s'" msgstr "'%s' 的无效 PCI 总线 ID" #: src/conf/node_device_conf.c:894 #, c-format msgid "no PCI slot ID supplied for '%s'" msgstr "没有为 '%s' 提供 PCI 插槽 ID" #: src/conf/node_device_conf.c:895 #, c-format msgid "invalid PCI slot ID supplied for '%s'" msgstr "'%s' 的无效 PCI 插槽 ID" #: src/conf/node_device_conf.c:900 #, c-format msgid "no PCI function ID supplied for '%s'" msgstr "没有为 '%s' 提供 PCI 功能 ID" #: src/conf/node_device_conf.c:901 #, c-format msgid "invalid PCI function ID supplied for '%s'" msgstr "'%s' 的无效 PCI 功能 ID" #: src/conf/node_device_conf.c:906 #, c-format msgid "no PCI vendor ID supplied for '%s'" msgstr "没有为 '%s' 提供 PCI 经销商 ID" #: src/conf/node_device_conf.c:907 #, c-format msgid "invalid PCI vendor ID supplied for '%s'" msgstr "'%s' 的无效 PCI 经销商 ID" #: src/conf/node_device_conf.c:912 #, c-format msgid "no PCI product ID supplied for '%s'" msgstr "没有为 '%s' 提供 PCI 产品 ID" #: src/conf/node_device_conf.c:913 #, c-format msgid "invalid PCI product ID supplied for '%s'" msgstr "'%s' 的无效 PCI 产品 ID" #: src/conf/node_device_conf.c:948 #, c-format msgid "no system UUID supplied for '%s'" msgstr "没有为 '%s' 系统 UUID" #: src/conf/node_device_conf.c:954 #, c-format msgid "malformed uuid element for '%s'" msgstr "'%s' 的畸形 uuid 元素" #: src/conf/node_device_conf.c:989 msgid "missing capability type" msgstr "缺少能力类型" #: src/conf/node_device_conf.c:995 #, c-format msgid "unknown capability type '%s'" msgstr "未知能力类型 '%s'" #: src/conf/node_device_conf.c:1029 #, c-format msgid "unknown capability type '%d' for '%s'" msgstr "未知能力类型 '%d'，用于 '%s'" #: src/conf/node_device_conf.c:1076 #, c-format msgid "no device capabilities for '%s'" msgstr "'%s' 没有设备容量" #: src/conf/secret_conf.c:56 src/conf/secret_conf.c:100 #: src/conf/secret_conf.c:274 src/conf/secret_conf.c:291 #, fuzzy, c-format msgid "unexpected secret usage type %d" msgstr "意外的网络类型 %d" #: src/conf/secret_conf.c:72 #, fuzzy msgid "unknown secret usage type" msgstr "未知设备类型" #: src/conf/secret_conf.c:78 #, fuzzy, c-format msgid "unknown secret usage type %s" msgstr "未知的网络接口类型 %s" #: src/conf/secret_conf.c:93 msgid "volume usage specified, but volume path is missing" msgstr "" #: src/conf/secret_conf.c:141 #, fuzzy msgid "invalid value of 'ephemeral'" msgstr "无效的容量值" #: src/conf/secret_conf.c:155 #, fuzzy msgid "invalid value of 'private'" msgstr "无效的容量值" #: src/conf/storage_conf.c:225 src/storage/storage_backend.c:767 #, c-format msgid "missing backend for pool type %d" msgstr "缺少池类型 %d 后端" #: src/conf/storage_conf.c:372 msgid "missing auth host attribute" msgstr "缺少 auth 主机属性" #: src/conf/storage_conf.c:379 msgid "missing auth passwd attribute" msgstr "缺少 auth 密码属性" #: src/conf/storage_conf.c:421 msgid "malformed octal mode" msgstr "畸形的八进制模式" #: src/conf/storage_conf.c:432 msgid "malformed owner element" msgstr "畸形的拥有者元素" #: src/conf/storage_conf.c:443 msgid "malformed group element" msgstr "畸形的组群元素" #: src/conf/storage_conf.c:475 src/storage/storage_driver.c:445 #, c-format msgid "unknown storage pool type %s" msgstr "未知存储池类型 %s" #: src/conf/storage_conf.c:492 msgid "missing pool source name element" msgstr "缺少池源名称元素" #: src/conf/storage_conf.c:500 src/storage/storage_backend.c:351 msgid "unable to generate uuid" msgstr "无法生成 uuid" #: src/conf/storage_conf.c:521 #, c-format msgid "unknown pool format type %s" msgstr "未知池格式类型 %s" #: src/conf/storage_conf.c:531 msgid "missing storage pool source host name" msgstr "缺少存储池源主机名称" #: src/conf/storage_conf.c:541 msgid "cannot extract storage pool source devices" msgstr "无法提取存储池源设备" #: src/conf/storage_conf.c:554 msgid "missing storage pool source device path" msgstr "缺少存储池源设备路径" #: src/conf/storage_conf.c:565 msgid "missing storage pool source path" msgstr "缺少存储池源路径" #: src/conf/storage_conf.c:587 msgid "missing storage pool source adapter name" msgstr "缺少存储池源适配器名称" #: src/conf/storage_conf.c:600 #, c-format msgid "unknown auth type '%s'" msgstr "未知 auth 类型 '%s'" #: src/conf/storage_conf.c:615 msgid "missing storage pool target path" msgstr "缺少存储池目标路径" #: src/conf/storage_conf.c:662 msgid "unknown root element for storage pool" msgstr "未知存储池的根元素" #: src/conf/storage_conf.c:793 #, c-format msgid "unknown pool format number %d" msgstr "不支持的池格式号 %d" #: src/conf/storage_conf.c:826 src/conf/storage_conf.c:1620 msgid "unexpected pool type" msgstr "意外的池类型" #: src/conf/storage_conf.c:924 #, c-format msgid "unknown size units '%s'" msgstr "未知大小的单元 '%s'" #: src/conf/storage_conf.c:931 msgid "malformed capacity element" msgstr "畸形容量元素" #: src/conf/storage_conf.c:936 msgid "capacity element value too large" msgstr "容量元素值过大" #: src/conf/storage_conf.c:968 msgid "missing volume name element" msgstr "缺少卷名称元素" #: src/conf/storage_conf.c:979 msgid "missing capacity element" msgstr "缺少容量元素" #: src/conf/storage_conf.c:1008 src/conf/storage_conf.c:1039 #, c-format msgid "unknown volume format type %s" msgstr "未知卷格式类型 %s" #: src/conf/storage_conf.c:1070 #, fuzzy msgid "unknown root element for storage vol" msgstr "未知存储池的根元素" #: src/conf/storage_conf.c:1175 #, c-format msgid "unknown volume format number %d" msgstr "未知卷格式号 %d" #: src/conf/storage_conf.c:1514 #, c-format msgid "cannot create config directory %s" msgstr "无法生成配置目录 %s" #: src/conf/storage_conf.c:1522 msgid "cannot construct config file path" msgstr "无法建立配置文件路径" #: src/conf/storage_conf.c:1533 msgid "cannot construct autostart link path" msgstr "无法建立自动启动链接路径" #: src/conf/storage_conf.c:1547 msgid "failed to generate XML" msgstr "创建 XML 失败" #: src/conf/storage_conf.c:1555 #, c-format msgid "cannot create config file %s" msgstr "无法生成配置文件 %s" #: src/conf/storage_conf.c:1563 #, c-format msgid "cannot write config file %s" msgstr "无法写入配置文件 %s" #: src/conf/storage_conf.c:1570 #, c-format msgid "cannot save config file %s" msgstr "无法保存配置文件 %s" #: src/conf/storage_conf.c:1591 #, c-format msgid "no config file for %s" msgstr "%s 没有配置文件" #: src/conf/storage_conf.c:1597 #, c-format msgid "cannot remove config for %s" msgstr "无法为 %s 删除配置" #: src/conf/storage_encryption_conf.c:93 #, fuzzy msgid "unknown volume encryption secret type" msgstr "未知卷格式类型 %s" #: src/conf/storage_encryption_conf.c:99 #, fuzzy, c-format msgid "unknown volume encryption secret type %s" msgstr "未知卷格式类型 %s" #: src/conf/storage_encryption_conf.c:111 #, fuzzy, c-format msgid "malformed volume encryption uuid '%s'" msgstr "不支持的验证类型 %d" #: src/conf/storage_encryption_conf.c:117 #, fuzzy msgid "missing volume encryption uuid" msgstr "未知卷格式类型 %s" #: src/conf/storage_encryption_conf.c:146 #, fuzzy msgid "unknown volume encryption format" msgstr "未知卷格式类型 %s" #: src/conf/storage_encryption_conf.c:152 #, fuzzy, c-format msgid "unknown volume encryption format type %s" msgstr "未知卷格式类型 %s" #: src/conf/storage_encryption_conf.c:163 #, fuzzy msgid "cannot extract volume encryption secrets" msgstr "无法提取输入设备" #: src/conf/storage_encryption_conf.c:195 #, fuzzy msgid "unknown root element for volume encryption information" msgstr "未知存储池的根元素" #: src/conf/storage_encryption_conf.c:227 #, fuzzy msgid "unexpected volume encryption secret type" msgstr "意外的字符设备类型" #: src/conf/storage_encryption_conf.c:247 #, fuzzy msgid "unexpected encryption format" msgstr "意外的周期动作 %d" #: src/conf/storage_encryption_conf.c:274 msgid "Cannot open /dev/urandom" msgstr "" #: src/conf/storage_encryption_conf.c:285 #, fuzzy msgid "Cannot read from /dev/urandom" msgstr "无法读取 fd" #: src/datatypes.c:341 msgid "failed to add domain to connection hash table" msgstr "添加域名到哈希链表失败" #: src/datatypes.c:382 msgid "domain missing from connection hash table" msgstr "域名从哈希链表中丢失" #: src/datatypes.c:482 msgid "failed to add network to connection hash table" msgstr "添加网络到连接哈希表失败" #: src/datatypes.c:520 msgid "network missing from connection hash table" msgstr "网络从连接哈希表中丢失" #: src/datatypes.c:624 #, c-format msgid "" "Failed to change interface mac address from %s to %s due to differing " "lengths." msgstr "将接口 mac 地址从 %s 改为 %s 失败，因为长度不一致。" #: src/datatypes.c:655 msgid "failed to add interface to connection hash table" msgstr "添加网络接口到连接哈希表失败" #: src/datatypes.c:694 msgid "interface missing from connection hash table" msgstr "网络接口从连接哈希表中丢失" #: src/datatypes.c:796 msgid "failed to add storage pool to connection hash table" msgstr "将存储池添加到连接连接哈希表失败" #: src/datatypes.c:835 msgid "pool missing from connection hash table" msgstr "连接哈希表中缺少池" #: src/datatypes.c:934 #, c-format msgid "Volume key %s too large for destination" msgstr "" #: src/datatypes.c:943 msgid "failed to add storage vol to connection hash table" msgstr "将存储卷添加到连接哈希表中失败" #: src/datatypes.c:983 msgid "vol missing from connection hash table" msgstr "连接哈希表中缺少 vol" #: src/datatypes.c:1079 msgid "failed to add node dev to conn hash table" msgstr "在哈希表中添加节点 dev 失败" #: src/datatypes.c:1117 msgid "dev missing from connection hash table" msgstr "连接哈希表中缺少 dev" #: src/datatypes.c:1213 msgid "failed to add secret to conn hash table" msgstr "在 conn 哈希表中添加 secret 失败" #: src/datatypes.c:1252 msgid "secret missing from connection hash table" msgstr "连接哈希表中缺少 secret" #: src/interface/netcf_driver.c:186 msgid "failed to get number of interfaces on host" msgstr "获取主机的网络接口数目失败" #: src/interface/netcf_driver.c:207 msgid "failed to list host interfaces" msgstr "列出主机网络接口失败" #: src/interface/netcf_driver.c:228 #, fuzzy msgid "failed to get number of defined interfaces on host" msgstr "为接口获得桥接失败" #: src/interface/netcf_driver.c:249 #, fuzzy msgid "failed to list host defined interfaces" msgstr "为接口获得桥接失败" #: src/interface/netcf_driver.c:316 msgid "multiple interfaces with matching MAC address" msgstr "" #: src/libvirt.c:1029 msgid "could not parse connection URI" msgstr "无法解析连接 URI" #: src/libvirt.c:2205 msgid "cannot get working directory" msgstr "无法获得工作目录" #: src/libvirt.c:2212 src/libvirt.c:2288 msgid "path too long" msgstr "路径过长" #: src/libvirt.c:2281 msgid "cannot get current directory" msgstr "无法获得当前目录" #: src/libvirt.c:2781 msgid "virDomainGetXMLDesc with secure flag" msgstr "带安全标志的 virDomainGetXMLDesc" #: src/libvirt.c:2939 msgid "domainMigratePrepare did not set uri" msgstr "domainMigratePrepare 没有设定 uri" #: src/libvirt.c:3019 src/qemu/qemu_driver.c:6718 msgid "domainMigratePrepare2 did not set uri" msgstr "domainMigratePrepare2 没有设定 uri" #: src/libvirt.c:3235 msgid "cannot perform tunnelled migration without using peer2peer flag" msgstr "" #: src/libvirt.c:4113 msgid "path is NULL" msgstr "路径为 NULL" #: src/libvirt.c:4119 msgid "flags must be zero" msgstr "标签必须为零" #: src/libvirt.c:4126 msgid "buffer is NULL" msgstr "缓冲为 NULL" #: src/libvirt.c:4227 src/qemu/qemu_driver.c:5663 #, fuzzy msgid "flags parameter must be VIR_MEMORY_VIRTUAL or VIR_MEMORY_PHYSICAL" msgstr "标签参数必须为 VIR_MEMORY_VIRTUAL" #: src/libvirt.c:4234 msgid "buffer is NULL but size is non-zero" msgstr "缓冲为 NULL 但大小是非零数" #: src/libvirt.c:9946 msgid "data sources cannot be used for non-blocking streams" msgstr "" #: src/libvirt.c:10043 msgid "data sinks cannot be used for non-blocking streams" msgstr "" #: src/lxc/lxc_container.c:128 msgid "setsid failed" msgstr "setsid 失败" #: src/lxc/lxc_container.c:134 msgid "ioctl(TIOCSTTY) failed" msgstr "ioctl(TIOCSTTY) 失败" #: src/lxc/lxc_container.c:147 msgid "dup2(stdin) failed" msgstr "dup2(stdin) 失败" #: src/lxc/lxc_container.c:153 msgid "dup2(stdout) failed" msgstr "dup2(stdout) 失败" #: src/lxc/lxc_container.c:159 msgid "dup2(stderr) failed" msgstr "dup2(stderr) 失败" #: src/lxc/lxc_container.c:187 msgid "unable to send container continue message" msgstr "无法发送容器继续信息" #: src/lxc/lxc_container.c:216 msgid "Failed to read the container continue message" msgstr "读取容器继续信息失败" #: src/lxc/lxc_container.c:297 #, fuzzy msgid "failed to make root private" msgstr "生成设备 %s 失败" #: src/lxc/lxc_container.c:308 src/lxc/lxc_container.c:330 #: src/lxc/lxc_container.c:501 #, c-format msgid "failed to create %s" msgstr "创建 %s 失败" #: src/lxc/lxc_container.c:317 #, c-format msgid "failed to mount empty tmpfs at %s" msgstr "挂载空的tmpfs到 %s 失败" #: src/lxc/lxc_container.c:338 #, fuzzy, c-format msgid "failed to bind new root %s into tmpfs" msgstr "绑定新 root %s 失败" #: src/lxc/lxc_container.c:347 #, fuzzy, c-format msgid "failed to chroot into %s" msgstr "创建 %s 到 %s 的链接失败" #: src/lxc/lxc_container.c:355 #, fuzzy msgid "failed to pivot root" msgstr "pivot root %s 到 %s 失败" #: src/lxc/lxc_container.c:398 #, c-format msgid "failed to mkdir %s" msgstr "新建文件夹 %s 失败" #: src/lxc/lxc_container.c:404 #, c-format msgid "failed to mount %s on %s" msgstr "将 %s 挂载到 %s 失败" #: src/lxc/lxc_container.c:412 msgid "cannot create /dev/pts" msgstr "无法创建 /dev/pts" #: src/lxc/lxc_container.c:419 #, fuzzy msgid "failed to mount /dev/pts in container" msgstr "将 /dev/pts 移动到容器失败" #: src/lxc/lxc_container.c:454 #, c-format msgid "failed to make device %s" msgstr "生成设备 %s 失败" #: src/lxc/lxc_container.c:463 #, fuzzy msgid "failed to create symlink /dev/ptmx to /dev/pts/ptmx" msgstr "为 '%s' 创建符号链接 '%s' 失败" #: src/lxc/lxc_container.c:471 #, fuzzy msgid "failed to make device /dev/ptmx" msgstr "生成设备 %s 失败" #: src/lxc/lxc_container.c:509 src/lxc/lxc_container.c:625 #, c-format msgid "failed to mount %s at %s" msgstr "在 %s 挂载 %s 失败" #: src/lxc/lxc_container.c:532 msgid "failed to read /proc/mounts" msgstr "读取 /proc/mounts 失败" #: src/lxc/lxc_container.c:561 #, c-format msgid "failed to unmount '%s'" msgstr "挂载 '%s' 失败" #: src/lxc/lxc_container.c:611 #, fuzzy msgid "failed to make / slave" msgstr "生成设备 %s 失败" #: src/lxc/lxc_container.c:635 msgid "failed to mount /proc" msgstr "挂载 /proc 失败" #: src/lxc/lxc_container.c:674 #, fuzzy, c-format msgid "failed to remove capabilities %d" msgstr "获得性能失败" #: src/lxc/lxc_container.c:680 src/lxc/lxc_controller.c:257 #, fuzzy, c-format msgid "failed to apply capabilities: %d" msgstr "获得性能失败" #: src/lxc/lxc_container.c:687 #, fuzzy, c-format msgid "failed to lock capabilities: %d" msgstr "获得性能失败" #: src/lxc/lxc_container.c:692 src/lxc/lxc_controller.c:261 msgid "libcap-ng support not compiled in, unable to clear capabilities" msgstr "" #: src/lxc/lxc_container.c:720 msgid "lxcChild() passed invalid vm definition" msgstr "lxcChild() 传递无效 vm 定义" #: src/lxc/lxc_container.c:741 #, c-format msgid "failed to open tty %s" msgstr "打开tty %s 失败" #: src/lxc/lxc_container.c:819 msgid "failed to run clone container" msgstr "运行克隆容器失败" #: src/lxc/lxc_controller.c:92 #, fuzzy msgid "Unable to get cgroup for driver" msgstr "无法为 %s 中创建 cgroup\n" #: src/lxc/lxc_controller.c:99 #, fuzzy, c-format msgid "Unable to create cgroup for domain %s" msgstr "为 %s 中创建 cgroup 失败\n" #: src/lxc/lxc_controller.c:107 #, fuzzy, c-format msgid "Unable to set memory limit for domain %s" msgstr "%lld 不在 %s 中" #: src/lxc/lxc_controller.c:115 #, fuzzy, c-format msgid "Unable to deny devices for domain %s" msgstr "为域 %s 分离设备失败" #: src/lxc/lxc_controller.c:128 #, fuzzy, c-format msgid "Unable to allow device %c:%d:%d for domain %s" msgstr "从 %s 获得设备失败" #: src/lxc/lxc_controller.c:137 #, fuzzy, c-format msgid "Unable to allow PYT devices for domain %s" msgstr "从 %s 获得设备失败" #: src/lxc/lxc_controller.c:145 #, fuzzy, c-format msgid "Unable to add task %d to cgroup for domain %s" msgstr "无法为 %s 中创建 cgroup\n" #: src/lxc/lxc_controller.c:173 #, c-format msgid "failed to create server socket '%s'" msgstr "创建服务器套接字 '%s' 失败" #: src/lxc/lxc_controller.c:183 #, c-format msgid "Socket path %s too long for destination" msgstr "" #: src/lxc/lxc_controller.c:189 #, c-format msgid "failed to bind server socket '%s'" msgstr "绑定服务器套接字 '%s' 失败" #: src/lxc/lxc_controller.c:195 #, c-format msgid "failed to listen server socket %s" msgstr "侦听服务器套接字 %s 失败" #: src/lxc/lxc_controller.c:229 #, c-format msgid "read of fd %d failed" msgstr "读取 fd %d 失败" #: src/lxc/lxc_controller.c:236 #, c-format msgid "write to fd %d failed" msgstr "写入 fd %d 失败" #: src/lxc/lxc_controller.c:307 msgid "epoll_create(2) failed" msgstr "epoll_create(2) 失败" #: src/lxc/lxc_controller.c:317 msgid "epoll_ctl(appPty) failed" msgstr "epoll_ctl(appPty) 失败" #: src/lxc/lxc_controller.c:323 src/lxc/lxc_controller.c:331 #: src/lxc/lxc_controller.c:339 src/lxc/lxc_controller.c:359 #: src/lxc/lxc_controller.c:365 msgid "epoll_ctl(contPty) failed" msgstr "epoll_ctl(contPty) 失败" #: src/lxc/lxc_controller.c:382 #, c-format msgid "error event %d" msgstr "错误事件 %d" #: src/lxc/lxc_controller.c:403 msgid "epoll_wait() failed" msgstr "epoll_wait() 失败" #: src/lxc/lxc_controller.c:453 #, c-format msgid "failed to move interface %s to ns %d" msgstr "将接口 %s 移动到 ns %d 失败" #: src/lxc/lxc_controller.c:478 #, c-format msgid "failed to delete veth: %s" msgstr "删除 veth 失败：%s" #: src/lxc/lxc_controller.c:511 msgid "sockpair failed" msgstr "sockpair 失败" #: src/lxc/lxc_controller.c:541 #, fuzzy msgid "cannot unshare mount namespace" msgstr "无法解析产品 %s" #: src/lxc/lxc_controller.c:547 #, fuzzy msgid "failed to switch root mount into slave mode" msgstr "pivot root %s 到 %s 失败" #: src/lxc/lxc_controller.c:559 #, c-format msgid "failed to make path %s" msgstr "生成路径 %s 失败" #: src/lxc/lxc_controller.c:567 #, c-format msgid "failed to mount devpts on %s" msgstr "挂载 devpts 到 %s 失败" #: src/lxc/lxc_controller.c:585 src/lxc/lxc_controller.c:594 #: src/lxc/lxc_driver.c:1145 msgid "failed to allocate tty" msgstr "分配 tty 失败" #: src/lxc/lxc_controller.c:771 #, c-format msgid "Unable to write pid file '%s/%s.pid'" msgstr "无法写入 pid 文件 '%s/%s.pid'" #: src/lxc/lxc_controller.c:785 msgid "Unable to change to root dir" msgstr "不能更改 root 目录" #: src/lxc/lxc_controller.c:791 msgid "Unable to become session leader" msgstr "无法成为会话引导者" #: src/lxc/lxc_controller.c:802 msgid "Failed connection from LXC driver" msgstr "从 LXC 驱动程序连接失败" #: src/lxc/lxc_driver.c:101 #, c-format msgid "unexpected LXC URI path '%s', try lxc:///" msgstr "" #: src/lxc/lxc_driver.c:109 #, fuzzy msgid "lxc state driver is not active" msgstr "存储池未激活" #: src/lxc/lxc_driver.c:322 src/lxc/lxc_driver.c:337 src/lxc/lxc_driver.c:1301 #: src/lxc/lxc_driver.c:1320 src/qemu/qemu_driver.c:2694 #: src/qemu/qemu_driver.c:2713 src/qemu/qemu_driver.c:3753 #: src/qemu/qemu_driver.c:3772 src/qemu/qemu_driver.c:4259 #: src/qemu/qemu_driver.c:4274 #, fuzzy, c-format msgid "domain '%s' is already defined with uuid %s" msgstr "域名 '%s' 已经定义" #: src/lxc/lxc_driver.c:345 src/lxc/lxc_driver.c:1248 #: src/lxc/lxc_driver.c:1328 msgid "System lacks NETNS support" msgstr "系统缺少 NETNS 支持" #: src/lxc/lxc_driver.c:393 src/lxc/lxc_driver.c:445 src/lxc/lxc_driver.c:498 #: src/lxc/lxc_driver.c:629 src/opennebula/one_driver.c:299 #: src/opennebula/one_driver.c:330 src/opennebula/one_driver.c:405 #: src/openvz/openvz_driver.c:390 src/openvz/openvz_driver.c:429 #: src/openvz/openvz_driver.c:473 src/openvz/openvz_driver.c:510 #: src/openvz/openvz_driver.c:948 src/openvz/openvz_driver.c:990 #: src/openvz/openvz_driver.c:1021 src/openvz/openvz_driver.c:1094 #: src/uml/uml_driver.c:1302 src/uml/uml_driver.c:1425 #: src/uml/uml_driver.c:1465 src/uml/uml_driver.c:1536 #: src/uml/uml_driver.c:1597 src/uml/uml_driver.c:1641 #: src/uml/uml_driver.c:1667 src/uml/uml_driver.c:1741 msgid "no domain with matching uuid" msgstr "没有匹配 uuid 的域" #: src/lxc/lxc_driver.c:399 src/openvz/openvz_driver.c:953 #: src/qemu/qemu_driver.c:4338 src/uml/uml_driver.c:1603 msgid "cannot delete active domain" msgstr "无法删除活跃域" #: src/lxc/lxc_driver.c:405 src/opennebula/one_driver.c:305 #: src/qemu/qemu_driver.c:4344 src/uml/uml_driver.c:1609 msgid "cannot undefine transient domain" msgstr "无法取消定义瞬时域" #: src/lxc/lxc_driver.c:457 src/lxc/lxc_driver.c:594 #, c-format msgid "Unable to get cgroup for %s\n" msgstr "无法为 %s 中创建 cgroup\n" #: src/lxc/lxc_driver.c:463 src/uml/uml_driver.c:1436 msgid "cannot read cputime for domain" msgstr "无法为域读取 cputime" #: src/lxc/lxc_driver.c:468 #, fuzzy msgid "cannot read memory usage for domain" msgstr "无法为域读取 cputime" #: src/lxc/lxc_driver.c:524 src/lxc/lxc_driver.c:549 src/lxc/lxc_driver.c:581 #: src/lxc/lxc_driver.c:1952 src/lxc/lxc_driver.c:1979 #: src/lxc/lxc_driver.c:2155 src/lxc/lxc_driver.c:2220 #: src/qemu/qemu_driver.c:2569 src/qemu/qemu_driver.c:2764 #: src/qemu/qemu_driver.c:2808 src/qemu/qemu_driver.c:2855 #: src/qemu/qemu_driver.c:2889 src/qemu/qemu_driver.c:2931 #: src/qemu/qemu_driver.c:2958 src/qemu/qemu_driver.c:2983 #: src/qemu/qemu_driver.c:3015 src/qemu/qemu_driver.c:3062 #: src/qemu/qemu_driver.c:3175 src/qemu/qemu_driver.c:3291 #: src/qemu/qemu_driver.c:3348 src/qemu/qemu_driver.c:3409 #: src/qemu/qemu_driver.c:3478 src/qemu/qemu_driver.c:3567 #: src/qemu/qemu_driver.c:3602 src/qemu/qemu_driver.c:3877 #: src/qemu/qemu_driver.c:4114 src/qemu/qemu_driver.c:4332 #: src/qemu/qemu_driver.c:4790 src/qemu/qemu_driver.c:5146 #: src/qemu/qemu_driver.c:5204 src/qemu/qemu_driver.c:5231 #: src/qemu/qemu_driver.c:5462 src/qemu/qemu_driver.c:5524 #: src/qemu/qemu_driver.c:5584 src/qemu/qemu_driver.c:5657 #: src/qemu/qemu_driver.c:6810 src/uml/uml_driver.c:1330 #: src/uml/uml_driver.c:1355 src/uml/uml_driver.c:1388 #, c-format msgid "no domain with matching uuid '%s'" msgstr "没有匹配 uuid '%s' 的域" #: src/lxc/lxc_driver.c:555 src/qemu/qemu_driver.c:2989 #: src/uml/uml_driver.c:1361 msgid "cannot set max memory lower than current memory" msgstr "无法将最大内存设置为低于当前内存" #: src/lxc/lxc_driver.c:587 src/qemu/qemu_driver.c:3021 #: src/uml/uml_driver.c:1400 msgid "cannot set memory higher than max memory" msgstr "无法将内存设置为高于最大内存" #: src/lxc/lxc_driver.c:600 #, fuzzy msgid "cannot set memory for domain" msgstr "无法在活跃域中设定内存" #: src/lxc/lxc_driver.c:671 #, c-format msgid "waitpid failed to wait for container %d: %d" msgstr "waitpid 等待容器 %d 失败：%d" #: src/lxc/lxc_driver.c:761 msgid "failed to get bridge for interface" msgstr "为接口获得桥接失败" #: src/lxc/lxc_driver.c:772 #, c-format msgid "failed to create veth device pair: %d" msgstr "创建 veth 设备对失败：%d" #: src/lxc/lxc_driver.c:785 msgid "failed to allocate veth names" msgstr "分配 veth 名称失败" #: src/lxc/lxc_driver.c:791 #, c-format msgid "failed to add %s device to %s" msgstr "在 %s 中添加 %s 设备失败" #: src/lxc/lxc_driver.c:798 msgid "failed to enable parent ns veth device" msgstr "启用父 ns veth 设备失败" #: src/lxc/lxc_driver.c:828 msgid "failed to create client socket" msgstr "创建客户端套接字失败" #: src/lxc/lxc_driver.c:836 #, c-format msgid "Socket path %s too big for destination" msgstr "" #: src/lxc/lxc_driver.c:842 msgid "failed to connect to client socket" msgstr "连接到客户端套接字失败" #: src/lxc/lxc_driver.c:867 #, c-format msgid "invalid PID %d for container" msgstr "容器的无效 PID %d" #: src/lxc/lxc_driver.c:874 #, c-format msgid "failed to kill pid %d" msgstr "杀死 pid %d 失败" #: src/lxc/lxc_driver.c:1069 src/util/util.c:833 #, c-format msgid "cannot wait for '%s'" msgstr "无法等待 '%s'" #: src/lxc/lxc_driver.c:1076 #, c-format msgid "container '%s' unexpectedly shutdown during startup" msgstr "启动过程中意外关闭容器 '%s' " #: src/lxc/lxc_driver.c:1131 #, c-format msgid "cannot create log directory '%s'" msgstr "无法生成日志目录 '%s'" #: src/lxc/lxc_driver.c:1166 #, c-format msgid "failed to open '%s'" msgstr "打开 '%s' 失败" #: src/lxc/lxc_driver.c:1186 #, c-format msgid "Failed to read pid file %s/%s.pid" msgstr "读取 pid 文件 %s/%s.pid 失败" #: src/lxc/lxc_driver.c:1242 src/opennebula/one_driver.c:432 #, c-format msgid "no domain named %s" msgstr "没有名为 %s 的域" #: src/lxc/lxc_driver.c:1309 src/qemu/qemu_driver.c:2702 #: src/qemu/qemu_driver.c:3761 #, c-format msgid "domain is already active as '%s'" msgstr "域已经激活为 '%s'" #: src/lxc/lxc_driver.c:1380 src/lxc/lxc_driver.c:1513 #: src/opennebula/one_driver.c:511 src/opennebula/one_driver.c:546 #, c-format msgid "no domain with id %d" msgstr "没有 id 是 %d 的域" #: src/lxc/lxc_driver.c:1571 src/qemu/qemu_driver.c:229 #, c-format msgid "Failed to autostart VM '%s': %s\n" msgstr "自动启动 VM '%s' 失败：%s\n" #: src/lxc/lxc_driver.c:1817 #, c-format msgid "Unknown release: %s" msgstr "未知发布：%s" #: src/lxc/lxc_driver.c:1853 src/lxc/lxc_driver.c:1911 #: src/qemu/qemu_driver.c:5334 src/qemu/qemu_driver.c:5405 #, c-format msgid "No such domain %s" msgstr "没有域 %s" #: src/lxc/lxc_driver.c:1864 src/qemu/qemu_driver.c:5351 msgid "invalid type for cpu_shares tunable, expected a 'ullong'" msgstr "" #: src/lxc/lxc_driver.c:1873 src/qemu/qemu_driver.c:5363 #, c-format msgid "Invalid parameter `%s'" msgstr "无效参数 `%s'" #: src/lxc/lxc_driver.c:1902 src/qemu/qemu_driver.c:5397 msgid "Invalid parameter count" msgstr "无效参数计数" #: src/lxc/lxc_driver.c:1923 msgid "Field cpu_shares too big for destination" msgstr "" #: src/lxc/lxc_driver.c:1985 src/qemu/qemu_driver.c:5237 #: src/uml/uml_driver.c:1673 msgid "cannot set autostart for transient domain" msgstr "无法为瞬时域设定自动启动" #: src/lxc/lxc_driver.c:2002 src/qemu/qemu_driver.c:5254 #: src/storage/storage_driver.c:977 src/uml/uml_driver.c:1690 #, c-format msgid "cannot create autostart directory %s" msgstr "无法生成自动启动目录 %s" #: src/lxc/lxc_driver.c:2009 src/qemu/qemu_driver.c:5261 #: src/uml/uml_driver.c:1697 #, c-format msgid "Failed to create symlink '%s to '%s'" msgstr "为 '%s' 创建符号链接 '%s' 失败" #: src/lxc/lxc_driver.c:2016 src/network/bridge_driver.c:1461 #: src/qemu/qemu_driver.c:5268 src/storage/storage_driver.c:992 #: src/uml/uml_driver.c:1704 #, c-format msgid "Failed to delete symlink '%s'" msgstr "删除符号链接 '%s' 失败" #: src/lxc/lxc_driver.c:2042 src/qemu/qemu_driver.c:2631 #: src/qemu/qemu_driver.c:6287 msgid "failed to determine host name" msgstr "决定主机名失败" #: src/lxc/lxc_driver.c:2161 src/lxc/lxc_driver.c:2226 #: src/opennebula/one_driver.c:592 src/qemu/qemu_driver.c:2769 #: src/qemu/qemu_driver.c:2813 src/qemu/qemu_driver.c:2861 #: src/qemu/qemu_driver.c:2894 src/qemu/qemu_driver.c:3181 #: src/qemu/qemu_driver.c:3297 src/qemu/qemu_driver.c:5467 #: src/qemu/qemu_driver.c:5530 src/qemu/qemu_driver.c:5669 #: src/qemu/qemu_driver.c:6816 src/xen/xen_hypervisor.c:1089 #: src/xen/xen_hypervisor.c:1169 src/xen/xen_hypervisor.c:1278 msgid "domain is not running" msgstr "域没有在运行" #: src/lxc/lxc_driver.c:2168 msgid "suspend operation failed" msgstr "挂起操作失败" #: src/lxc/lxc_driver.c:2233 src/qemu/qemu_driver.c:1266 #: src/qemu/qemu_driver.c:2820 src/qemu/qemu_driver.c:6917 msgid "resume operation failed" msgstr "恢复操作失败" #: src/network/bridge_driver.c:240 src/qemu/qemu_conf.c:1155 #: src/uml/uml_conf.c:114 msgid "cannot initialize bridge support" msgstr "无法初始化桥接支持" #: src/network/bridge_driver.c:292 msgid "Reloading iptables rules\n" msgstr "重新载入路由表规则\n" #: src/network/bridge_driver.c:522 msgid "cannot start dhcp daemon without IP address for server" msgstr "没有服务器 IP 地址无法启动 dhcp 守护进程" #: src/network/bridge_driver.c:528 src/network/bridge_driver.c:534 #, c-format msgid "cannot create directory %s" msgstr "无法生成日志目录 %s" #: src/network/bridge_driver.c:587 #, c-format msgid "failed to add iptables rule to allow forwarding from '%s'" msgstr "添加路由表规则允许从 '%s' 转发失败" #: src/network/bridge_driver.c:598 #, c-format msgid "failed to add iptables rule to allow forwarding to '%s'" msgstr "添加路由表规则允许转发至 '%s' 失败" #: src/network/bridge_driver.c:608 #, c-format msgid "failed to add iptables rule to enable masquerading to '%s'\n" msgstr "添加路由表规则启用伪装至 '%s'\n" #: src/network/bridge_driver.c:640 #, c-format msgid "failed to add iptables rule to allow routing from '%s'" msgstr "添加路由表规则允许从 '%s' 路由失败" #: src/network/bridge_driver.c:651 #, c-format msgid "failed to add iptables rule to allow routing to '%s'" msgstr "添加路由表规则允许路由至 '%s' 失败" #: src/network/bridge_driver.c:677 src/network/bridge_driver.c:684 #, c-format msgid "failed to add iptables rule to allow DHCP requests from '%s'" msgstr "添加路由表规则允许从 '%s' 请求 DHCP 失败" #: src/network/bridge_driver.c:692 src/network/bridge_driver.c:699 #, c-format msgid "failed to add iptables rule to allow DNS requests from '%s'" msgstr "添加路由表规则允许从 '%s' 请求 DNS 失败" #: src/network/bridge_driver.c:709 #, c-format msgid "failed to add iptables rule to block outbound traffic from '%s'" msgstr "添加路由表规则允许阻断从 '%s' 外出流量失败" #: src/network/bridge_driver.c:716 #, c-format msgid "failed to add iptables rule to block inbound traffic to '%s'" msgstr "添加路由表规则允许进入 '%s' 的流量失败" #: src/network/bridge_driver.c:724 #, c-format msgid "failed to add iptables rule to allow cross bridge traffic on '%s'" msgstr "添加路由表规则允许从 '%s' 中的跨桥接流量失败" #: src/network/bridge_driver.c:826 src/network/bridge_driver.c:850 #, c-format msgid "cannot enable %s" msgstr "无法启用 %s" #: src/network/bridge_driver.c:838 #, c-format msgid "cannot disable %s" msgstr "无法禁用 %s" #: src/network/bridge_driver.c:867 msgid "network is already active" msgstr "网络已经激活" #: src/network/bridge_driver.c:873 #, c-format msgid "cannot create bridge '%s'" msgstr "无法创建桥接 '%s'" #: src/network/bridge_driver.c:890 #, c-format msgid "cannot set IP address on bridge '%s' to '%s'" msgstr "无法在桥接 '%s' 中设置 IP 地址 '%s'" #: src/network/bridge_driver.c:898 #, c-format msgid "cannot set netmask on bridge '%s' to '%s'" msgstr "无法在桥接 '%s' 将子网掩码设为 '%s'" #: src/network/bridge_driver.c:905 #, c-format msgid "failed to bring the bridge '%s' up" msgstr "停止桥接 '%s' 失败" #: src/network/bridge_driver.c:916 msgid "failed to enable IP forwarding" msgstr "启动 IP 转发失败" #: src/network/bridge_driver.c:947 src/network/bridge_driver.c:987 #, c-format msgid "Failed to bring down bridge '%s' : %s\n" msgstr "减少桥接 '%s' 失败：%s\n" #: src/network/bridge_driver.c:954 src/network/bridge_driver.c:992 #, c-format msgid "Failed to delete bridge '%s' : %s\n" msgstr "删除桥接 '%s' 失败：%s\n" #: src/network/bridge_driver.c:968 #, c-format msgid "Shutting down network '%s'\n" msgstr "关闭网络 '%s'\n" #: src/network/bridge_driver.c:1025 src/network/bridge_driver.c:1250 #: src/network/bridge_driver.c:1288 src/network/bridge_driver.c:1311 #: src/network/bridge_driver.c:1346 src/network/bridge_driver.c:1401 #: src/network/bridge_driver.c:1426 msgid "no network with matching uuid" msgstr "没有带匹配 uuid 的网络" #: src/network/bridge_driver.c:1048 #, c-format msgid "no network with matching name '%s'" msgstr "没有匹配名称 '%s' 的网络" #: src/network/bridge_driver.c:1256 msgid "network is still active" msgstr "网络仍活跃" #: src/network/bridge_driver.c:1317 msgid "network is not active" msgstr "网络接口 %s 未激活" #: src/network/bridge_driver.c:1369 msgid "no network with matching id" msgstr "没有带匹配 id 的网络" #: src/network/bridge_driver.c:1375 src/test/test_driver.c:2625 #, c-format msgid "network '%s' does not have a bridge name." msgstr "网络 '%s' 没有桥接名称。" #: src/network/bridge_driver.c:1432 #, fuzzy msgid "cannot set autostart for transient network" msgstr "无法为瞬时域设定自动启动" #: src/network/bridge_driver.c:1447 #, c-format msgid "cannot create autostart directory '%s'" msgstr "无法生成自动启动目录 '%s'" #: src/network/bridge_driver.c:1454 src/storage/storage_driver.c:984 #, c-format msgid "Failed to create symlink '%s' to '%s'" msgstr "为 '%s' 创建符号链接 '%s' 失败" #: src/node_device/node_device_driver.c:54 #, fuzzy, c-format msgid "Failed to refresh WWPN for host%d" msgstr "刷新池 %s 失败" #: src/node_device/node_device_driver.c:61 #, fuzzy, c-format msgid "Failed to refresh WWNN for host%d" msgstr "刷新池 %s 失败" #: src/node_device/node_device_driver.c:99 #, fuzzy, c-format msgid "cannot resolve driver link %s" msgstr "无法解析系统链接 %s" #: src/node_device/node_device_driver.c:277 #: src/node_device/node_device_driver.c:306 #: src/node_device/node_device_driver.c:341 #: src/node_device/node_device_driver.c:372 src/test/test_driver.c:4263 #: src/test/test_driver.c:4289 src/test/test_driver.c:4325 #: src/test/test_driver.c:4356 #, fuzzy, c-format msgid "no node device with matching name '%s'" msgstr "没有名称匹配的节点设备" #: src/node_device/node_device_driver.c:317 src/test/test_driver.c:4300 msgid "no parent for this device" msgstr "这个设备没有上一级设备" #: src/node_device/node_device_driver.c:416 #, c-format msgid "Invalid vport operation (%d)" msgstr "无效的 vport 操作 (%d)" #: src/node_device/node_device_driver.c:433 #, fuzzy, c-format msgid "Vport operation path is '%s'" msgstr "无法打开路径 '%s'" #: src/node_device/node_device_driver.c:447 #, c-format msgid "Write of '%s' to '%s' during vport create/delete failed" msgstr "" #: src/node_device/node_device_driver.c:456 #, fuzzy msgid "Vport operation complete" msgstr "迁移操作失败" #: src/node_device/node_device_driver.c:484 msgid "Device is not a fibre channel HBA" msgstr "" #: src/node_device/node_device_driver.c:514 #, fuzzy, c-format msgid "Could not find parent HBA for '%s'" msgstr "无法找到类型文件 '%s'" #: src/node_device/node_device_driver.c:534 #, c-format msgid "Parent HBA %s is not capable of vport operations" msgstr "" #: src/node_device/node_device_driver.c:555 #, fuzzy msgid "Could not get current time" msgstr "无法获得当前时间" #: src/node_device/node_device_hal_linux.c:53 #, fuzzy, c-format msgid "Opened WWN path '%s' for reading" msgstr "打开并读取 %s 文件失败" #: src/node_device/node_device_hal_linux.c:56 #, fuzzy, c-format msgid "Failed to open WWN path '%s' for reading" msgstr "打开并读取 %s 文件失败" #: src/node_device/node_device_hal_linux.c:79 #, fuzzy, c-format msgid "Failed to read WWN for host%d '%s'" msgstr "从 '%s' 读取失败：%s" #: src/node_device/node_device_hal_linux.c:117 #, c-format msgid "Checking if host%d is an FC HBA" msgstr "" #: src/node_device/node_device_hal_linux.c:137 #, fuzzy, c-format msgid "Failed to read WWPN for host%d" msgstr "从 '%s' 读取失败：%s" #: src/node_device/node_device_hal_linux.c:146 #, fuzzy, c-format msgid "Failed to read WWNN for host%d" msgstr "从 '%s' 读取失败：%s" #: src/nodeinfo.c:82 msgid "parsing cpuinfo processor" msgstr "正在解析 cpuinfo 处理器" #: src/nodeinfo.c:94 msgid "parsing cpuinfo cpu MHz" msgstr "正在解析 cpuinfo cpu MHz" #: src/nodeinfo.c:121 msgid "no cpus found" msgstr "没有找到 cpus" #: src/nodeinfo.c:159 src/uml/uml_driver.c:1766 src/util/pci.c:1046 #: src/util/util.c:352 #, c-format msgid "cannot open %s" msgstr "无法打开 %s" #: src/nodeinfo.c:175 #, fuzzy msgid "node info not implemented on this platform" msgstr "这个平台中没有使用控制台" #: src/nodeinfo.c:257 src/nodeinfo.c:294 msgid "NUMA not supported on this host" msgstr "在这台主机中不支持 NUMA" #: src/nodeinfo.c:263 #, c-format msgid "start cell %d out of range (0-%d)" msgstr "启动单元 %d 溢出（0 - %d）" #: src/nodeinfo.c:275 src/nodeinfo.c:302 msgid "Failed to query NUMA free memory" msgstr "查询 NUMA 可用内存失败" #: src/nodeinfo.c:323 src/nodeinfo.c:330 msgid "NUMA memory information not available on this platform" msgstr "" #: src/opennebula/one_conf.c:150 msgid "Error submitting virtual machine to OpenNebula" msgstr "" #: src/opennebula/one_driver.c:336 src/test/test_driver.c:337 #: src/test/test_driver.c:1446 src/test/test_driver.c:2216 #: src/test/test_driver.c:2271 msgid "getting time of day" msgstr "正在获得一天当中的时间" #: src/opennebula/one_driver.c:469 #, fuzzy, c-format msgid "Already an OpenNebula VM active with the name: '%s' id: %d " msgstr "已经用 id '%s' 激活了 OPENVZ VM" #: src/opennebula/one_driver.c:517 src/opennebula/one_driver.c:553 #: src/opennebula/one_driver.c:588 src/opennebula/one_driver.c:621 #, fuzzy msgid "Wrong state to perform action" msgstr "存储卷信息" #: src/opennebula/one_driver.c:595 src/opennebula/one_driver.c:628 #: src/qemu/qemu_driver.c:2542 src/uml/uml_driver.c:1242 #: src/uml/uml_driver.c:1272 src/vbox/vbox_tmpl.c:796 #, c-format msgid "no domain with matching id %d" msgstr "没有匹配 id %d 的域" #: src/opennebula/one_driver.c:625 msgid "domain is not paused " msgstr "域不处于暂停状态" #: src/openvz/openvz_conf.c:131 #, fuzzy msgid "Could not extract vzctl version" msgstr "无法提取 vzctl 版本" #: src/openvz/openvz_conf.c:198 #, fuzzy, c-format msgid "Could not read 'IP_ADDRESS' from config for container %d" msgstr "无法为容器 %d 在 config 中读取 'IP_ADDRESS'" #: src/openvz/openvz_conf.c:230 #, fuzzy, c-format msgid "Could not read 'NETIF' from config for container %d" msgstr "无法为容器 %d 在 config 中读取 'NETIF'" #: src/openvz/openvz_conf.c:256 msgid "Too long network device name" msgstr "网络文件名过长" #: src/openvz/openvz_conf.c:265 #, c-format msgid "Network ifname %s too long for destination" msgstr "" #: src/openvz/openvz_conf.c:273 msgid "Too long bridge device name" msgstr "桥接设备名称过长" #: src/openvz/openvz_conf.c:282 #, c-format msgid "Bridge name %s too long for destination" msgstr "" #: src/openvz/openvz_conf.c:290 msgid "Wrong length MAC address" msgstr "错误的 MAC 地址长度" #: src/openvz/openvz_conf.c:295 #, c-format msgid "MAC address %s too long for destination" msgstr "" #: src/openvz/openvz_conf.c:300 msgid "Wrong MAC address" msgstr "错误 MAC 地址" #: src/openvz/openvz_conf.c:367 #, fuzzy, c-format msgid "Could not read 'OSTEMPLATE' from config for container %d" msgstr "无法为容器 %d 在 config 中读取 'OSTEMPLATE'" #: src/openvz/openvz_conf.c:381 #, fuzzy, c-format msgid "Could not read 'VE_PRIVATE' from config for container %d" msgstr "无法为容器 %d 在 config 中读取 'VE_PRIVATE'" #: src/openvz/openvz_conf.c:442 msgid "popen failed" msgstr "popen 失败" #: src/openvz/openvz_conf.c:452 src/openvz/openvz_driver.c:149 msgid "Failed to parse vzlist output" msgstr "解析 vzlist 输入失败" #: src/openvz/openvz_conf.c:485 msgid "UUID in config file malformed" msgstr "配置文件中的 UUID 很奇怪" #: src/openvz/openvz_conf.c:497 #, fuzzy, c-format msgid "Could not read config for container %d" msgstr "无法为容器 %d 在 config 中读取" #: src/openvz/openvz_driver.c:114 msgid "Container is not defined" msgstr "没有定义容器" #: src/openvz/openvz_driver.c:139 #, fuzzy msgid "popen failed" msgstr "popen 失败" #: src/openvz/openvz_driver.c:187 src/openvz/openvz_driver.c:696 #, c-format msgid "Could not put argument to %s" msgstr "无法将参数设为 %s" #: src/openvz/openvz_driver.c:210 msgid "only one filesystem supported" msgstr "只支持一个文件系统" #: src/openvz/openvz_driver.c:219 msgid "filesystem is not of type 'template' or 'mount'" msgstr "filesyste 不是 'template' 或者 'mount' 类型" #: src/openvz/openvz_driver.c:230 msgid "Could not convert domain name to VEID" msgstr "无法将域名转换为域 VEID" #: src/openvz/openvz_driver.c:236 msgid "Could not copy default config" msgstr "无法复制默认 config" #: src/openvz/openvz_driver.c:242 msgid "Could not set the source dir for the filesystem" msgstr "无法为文件系统设置源目录" #: src/openvz/openvz_driver.c:250 msgid "Error creating command for container" msgstr "为容器生成命令出错" #: src/openvz/openvz_driver.c:256 src/openvz/openvz_driver.c:683 #: src/openvz/openvz_driver.c:867 src/openvz/openvz_driver.c:922 #: src/openvz/openvz_driver.c:960 src/openvz/openvz_driver.c:996 #: src/openvz/openvz_driver.c:1074 src/openvz/openvz_driver.c:1228 #: src/openvz/openvz_driver.c:1279 #, c-format msgid "Could not exec %s" msgstr "无法执行 %s" #: src/openvz/openvz_driver.c:401 #, c-format msgid "cannot read cputime for domain %d" msgstr "无法为域 %d 读取 cputime" #: src/openvz/openvz_driver.c:480 src/openvz/openvz_driver.c:517 msgid "domain is not in running state" msgstr "域没有处于运行状态" #: src/openvz/openvz_driver.c:597 msgid "Container ID is not specified" msgstr "没有指定容器 ID" #: src/openvz/openvz_driver.c:630 msgid "Could not generate eth name for container" msgstr "无法为容器生成 eth 名称" #: src/openvz/openvz_driver.c:641 msgid "Could not generate veth name" msgstr "无法生成 veth 名称" #: src/openvz/openvz_driver.c:725 msgid "Could not configure network" msgstr "无法配置网络" #: src/openvz/openvz_driver.c:736 msgid "cannot replace NETIF config" msgstr "无法替换 NETIF 配置" #: src/openvz/openvz_driver.c:773 #, c-format msgid "Already an OPENVZ VM active with the id '%s'" msgstr "已经用 id '%s' 激活了 OPENVZ VM" #: src/openvz/openvz_driver.c:783 src/openvz/openvz_driver.c:850 #, fuzzy msgid "Error creating initial configuration" msgstr "生成初始配置时出错" #: src/openvz/openvz_driver.c:791 src/openvz/openvz_driver.c:856 msgid "Could not set UUID" msgstr "无法设置 UUID" #: src/openvz/openvz_driver.c:801 src/openvz/openvz_driver.c:878 msgid "Could not set number of virtual cpu" msgstr "无法设置虚拟 CPU 数" #: src/openvz/openvz_driver.c:840 #, c-format msgid "Already an OPENVZ VM defined with the id '%s'" msgstr "已经位于 id 为 '%s' 的 OPENVZ VM 中" #: src/openvz/openvz_driver.c:909 msgid "no domain with matching id" msgstr "没有匹配 id 的域" #: src/openvz/openvz_driver.c:915 msgid "domain is not in shutoff state" msgstr "域没有处于关闭状态" #: src/openvz/openvz_driver.c:1027 msgid "Could not read container config" msgstr "无法读取容器配置" #: src/openvz/openvz_driver.c:1048 src/qemu/qemu_driver.c:2432 #, c-format msgid "unknown type '%s'" msgstr "未知类型 '%s'" #: src/openvz/openvz_driver.c:1100 msgid "VCPUs should be >= 1" msgstr "VCPUs 应该 >= 1" #: src/openvz/openvz_driver.c:1145 #, c-format msgid "unexpected OpenVZ URI path '%s', try openvz:///system" msgstr "" #: src/openvz/openvz_driver.c:1152 msgid "OpenVZ control file /proc/vz does not exist" msgstr "" #: src/openvz/openvz_driver.c:1158 msgid "OpenVZ control file /proc/vz is not accessible" msgstr "" #: src/openvz/openvz_driver.c:1237 src/openvz/openvz_driver.c:1288 #, c-format msgid "Could not parse VPS ID %s" msgstr "无法解析 VPS ID %s" #: src/phyp/phyp_driver.c:87 msgid "Missing server name in phyp:// URI" msgstr "" #: src/phyp/phyp_driver.c:94 msgid "Missing path name in phyp:// URI" msgstr "" #: src/phyp/phyp_driver.c:118 msgid "Error parsing 'path'. Invalid characters." msgstr "" #: src/phyp/phyp_driver.c:125 #, fuzzy msgid "Error while opening SSH session." msgstr "重新载入驱动程序时出错" #: src/phyp/phyp_driver.c:186 #, fuzzy, c-format msgid "Error while getting %s address info" msgstr "重新载入驱动程序时出错" #: src/phyp/phyp_driver.c:205 #, fuzzy, c-format msgid "Failed to connect to %s" msgstr "不能连接到 '%s'" #: src/phyp/phyp_driver.c:226 #, fuzzy msgid "Failure establishing SSH session." msgstr "重新载入驱动程序时出错" #: src/phyp/phyp_driver.c:250 #, fuzzy msgid "No authentication callback provided." msgstr "验证失败" #: src/phyp/phyp_driver.c:262 msgid "Required credentials are not supported." msgstr "" #: src/phyp/phyp_driver.c:272 msgid "Unable to fetch credentials." msgstr "无法获取验证证书" #: src/phyp/phyp_driver.c:281 #, fuzzy msgid "Unable to get password certificates" msgstr "无法验证密码： %s" #: src/phyp/phyp_driver.c:295 #, fuzzy msgid "Authentication failed" msgstr "验证失败" #: src/qemu/qemu_conf.c:119 #, fuzzy msgid "unable to find hugetlbfs mountpoint" msgstr "无法为 %s 中创建 cgroup\n" #: src/qemu/qemu_conf.c:246 src/qemu/qemu_conf.c:284 msgid "cgroup_device_acl must be a list of strings" msgstr "" #: src/qemu/qemu_conf.c:463 msgid "Unable to read 'qemu -M ?' output" msgstr "" #: src/qemu/qemu_conf.c:483 src/qemu/qemu_conf.c:1060 #, c-format msgid "Unexpected exit status from qemu %d pid %lu" msgstr "来自 %d pid %lu 的意外退出状态" #: src/qemu/qemu_conf.c:491 src/qemu/qemu_conf.c:1068 #, c-format msgid "Unexpected exit status '%d', qemu probably failed" msgstr "意外退出状态 '%d'，qemu 可能失败" #: src/qemu/qemu_conf.c:640 src/qemu/qemu_conf.c:720 #, fuzzy, c-format msgid "Failed to stat %s, most peculiar : %s" msgstr "启动池 %s 失败" #: src/qemu/qemu_conf.c:1003 #, fuzzy, c-format msgid "cannot parse QEMU version number in '%s'" msgstr "无法解析版本 %s" #: src/qemu/qemu_conf.c:1036 #, fuzzy msgid "Unable to read QEMU help output" msgstr "无法 daemonize QEMU 进程" #: src/qemu/qemu_conf.c:1108 #, c-format msgid "Cannot find QEMU binary %s: %s" msgstr "无法找到 QEMU 二进制 %s：%s" #: src/qemu/qemu_conf.c:1149 #, c-format msgid "Network type %d is not supported" msgstr "不支持网络类型 %d" #: src/qemu/qemu_conf.c:1180 src/uml/uml_conf.c:133 #, c-format msgid "Failed to add tap interface to bridge. %s is not a bridge device" msgstr "在桥接中添加 tap 接口失败。%s 不是桥接设备" #: src/qemu/qemu_conf.c:1184 src/uml/uml_conf.c:137 #, fuzzy, c-format msgid "Failed to add tap interface to bridge '%s'" msgstr "将 tap 接口 '%s' 添加到桥接 '%s' 失败：%s" #: src/qemu/qemu_conf.c:1188 src/uml/uml_conf.c:141 #, fuzzy, c-format msgid "Failed to add tap interface '%s' to bridge '%s'" msgstr "将 tap 接口 '%s' 添加到桥接 '%s' 失败：%s" #: src/qemu/qemu_conf.c:1472 #, fuzzy, c-format msgid "driver serial '%s' contains unsafe characters" msgstr "模块名称中含有无效字符" #: src/qemu/qemu_conf.c:1521 msgid "TCP migration is not supported with this QEMU binary" msgstr "在此 QEMU 二进制中不支持 TCP 迁移" #: src/qemu/qemu_conf.c:1529 src/qemu/qemu_conf.c:1535 msgid "STDIO migration is not supported with this QEMU binary" msgstr "在此 QEMU 二进制中不支持 STDIO 迁移" #: src/qemu/qemu_conf.c:1691 msgid "hugetlbfs filesystem is not mounted" msgstr "" #: src/qemu/qemu_conf.c:1696 msgid "hugepages are disabled by administrator config" msgstr "" #: src/qemu/qemu_conf.c:1701 #, fuzzy, c-format msgid "hugepage backing not supported by '%s'" msgstr "不支持的磁盘类型 '%s'" #: src/qemu/qemu_conf.c:1731 #, fuzzy, c-format msgid "qemu emulator '%s' does not support xen" msgstr "命令 '%s' 不支持选项 --%s" #: src/qemu/qemu_conf.c:1816 #, c-format msgid "unsupported driver name '%s' for disk '%s'" msgstr "磁盘 '%s' 不支持驱动程序名称 '%s' " #: src/qemu/qemu_conf.c:1856 src/qemu/qemu_conf.c:1938 #, c-format msgid "unsupported usb disk type for '%s'" msgstr "'%s' 中不支持的 usb 磁盘类型" #: src/qemu/qemu_conf.c:1866 src/qemu/qemu_conf.c:1957 src/uml/uml_conf.c:477 #, c-format msgid "unsupported disk type '%s'" msgstr "不支持的磁盘类型 '%s'" #: src/qemu/qemu_conf.c:2164 #, fuzzy msgid "only one video card is currently supported" msgstr "只支持一个文件系统" #: src/qemu/qemu_conf.c:2175 src/qemu/qemu_conf.c:2201 #, fuzzy, c-format msgid "video type %s is not supported with QEMU" msgstr "不支持网络类型 %d" #: src/qemu/qemu_conf.c:2221 msgid "invalid sound model" msgstr "无效的声音模块" #: src/qemu/qemu_conf.c:2266 src/qemu/qemu_monitor_text.c:1517 #, fuzzy msgid "PCI device assignment is not supported by this version of qemu" msgstr "这个 qemu 不支持 'migrate'" #: src/qemu/qemu_conf.c:2480 #, fuzzy, c-format msgid "malformed keyword arguments in '%s'" msgstr "'%s' 的畸形 uuid 元素" #: src/qemu/qemu_conf.c:2613 #, fuzzy, c-format msgid "cannot parse drive index '%s'" msgstr "无法解析设备 %s" #: src/qemu/qemu_conf.c:2622 #, fuzzy, c-format msgid "missing file parameter in drive '%s'" msgstr "丢失设备信息 %s" #: src/qemu/qemu_conf.c:2629 #, c-format msgid "missing index parameter in drive '%s'" msgstr "" #: src/qemu/qemu_conf.c:2689 #, fuzzy, c-format msgid "cannot parse NIC vlan in '%s'" msgstr "无法解析 PCI 域 '%s'" #: src/qemu/qemu_conf.c:2701 #, c-format msgid "cannot find NIC definition for vlan %d" msgstr "" #: src/qemu/qemu_conf.c:2760 #, fuzzy, c-format msgid "cannot parse vlan in '%s'" msgstr "无法接续域 %s" #: src/qemu/qemu_conf.c:2790 #, fuzzy, c-format msgid "cannot parse NIC definition '%s'" msgstr "无法解析功能 %s" #: src/qemu/qemu_conf.c:2854 src/qemu/qemu_conf.c:2912 #, fuzzy, c-format msgid "unknown PCI device syntax '%s'" msgstr "未知字符设备类型 '%s'" #: src/qemu/qemu_conf.c:2862 src/qemu/qemu_conf.c:2935 #, fuzzy, c-format msgid "cannot extract PCI device bus '%s'" msgstr "无法提取磁盘设备" #: src/qemu/qemu_conf.c:2869 #, fuzzy, c-format msgid "cannot extract PCI device slot '%s'" msgstr "无法提取磁盘设备" #: src/qemu/qemu_conf.c:2876 #, fuzzy, c-format msgid "cannot extract PCI device function '%s'" msgstr "无法提取磁盘设备" #: src/qemu/qemu_conf.c:2921 #, fuzzy, c-format msgid "cannot extract USB device vendor '%s'" msgstr "无法提取磁盘设备" #: src/qemu/qemu_conf.c:2928 #, fuzzy, c-format msgid "cannot extract PCI device product '%s'" msgstr "无法提取磁盘设备" #: src/qemu/qemu_conf.c:2942 #, fuzzy, c-format msgid "cannot extract PCI device address '%s'" msgstr "无法提取磁盘设备" #: src/qemu/qemu_conf.c:3043 #, fuzzy, c-format msgid "cannot find port number in character device %s" msgstr "无法找到新生成的卷 '%s'" #: src/qemu/qemu_conf.c:3079 #, fuzzy, c-format msgid "unknown character device syntax %s" msgstr "未知字符设备类型 '%s'" #: src/qemu/qemu_conf.c:3113 #, fuzzy msgid "no emulator path found" msgstr "没有监视器路径" #: src/qemu/qemu_conf.c:3165 #, fuzzy, c-format msgid "missing value for %s argument" msgstr "缺少 auth 主机属性" #: src/qemu/qemu_conf.c:3210 #, fuzzy, c-format msgid "cannot parse VNC port '%s'" msgstr "无法解析 PCI 插槽 '%s'" #: src/qemu/qemu_conf.c:3234 #, fuzzy, c-format msgid "cannot parse memory level '%s'" msgstr "无法解析设备 %s" #: src/qemu/qemu_conf.c:3243 #, fuzzy, c-format msgid "cannot parse CPU count '%s'" msgstr "无法解析 PCI 插槽 '%s'" #: src/qemu/qemu_conf.c:3251 #, fuzzy, c-format msgid "cannot parse UUID '%s'" msgstr "无法解析 PCI 总线 '%s'" #: src/qemu/qemu_conf.c:3496 #, fuzzy, c-format msgid "unknown video adapter type '%s'" msgstr "未知接口类型 '%s'" #: src/qemu/qemu_conf.c:3516 #, c-format msgid "unknown QEMU argument '%s' during conversion" msgstr "" #: src/qemu/qemu_conf.c:3519 #, fuzzy, c-format msgid "unknown argument '%s'" msgstr "未知 auth 类型 '%s'" #: src/qemu/qemu_driver.c:152 src/qemu/qemu_driver.c:184 #: src/uml/uml_driver.c:807 #, c-format msgid "failed to create logfile %s" msgstr "生成日志文件 %s 失败" #: src/qemu/qemu_driver.c:158 src/qemu/qemu_driver.c:190 #: src/uml/uml_driver.c:816 msgid "Unable to set VM logfile close-on-exec flag" msgstr "无法为 VM 日志文件设定 close-on-exec 标签" #: src/qemu/qemu_driver.c:176 #, c-format msgid "failed to build logfile name %s/%s.log" msgstr "生成日志文件 %s/%s.log 失败" #: src/qemu/qemu_driver.c:196 #, c-format msgid "Unable to seek to %lld in %s" msgstr "%lld 不在 %s 中" #: src/qemu/qemu_driver.c:272 #, c-format msgid "Failed to unlink status file %s" msgstr "取消链接状态文件 %s 失败" #: src/qemu/qemu_driver.c:303 #, c-format msgid "Failed to reconnect monitor for %s: %d\n" msgstr "为 %s 重新连接监视器失败：%d\n" #: src/qemu/qemu_driver.c:365 #, c-format msgid "Failed to copy secModel model: %s" msgstr "复制 secModel 模式失败：%s" #: src/qemu/qemu_driver.c:373 #, c-format msgid "Failed to copy secModel DOI: %s" msgstr "复制 secModel DOI 失败：%s" #: src/qemu/qemu_driver.c:394 msgid "Failed to start security driver" msgstr "启动安全性驱动程序失败" #: src/qemu/qemu_driver.c:399 msgid "No security driver available" msgstr "没有可用安全性驱动程序" #: src/qemu/qemu_driver.c:498 #, c-format msgid "Failed to create state dir '%s': %s\n" msgstr "生成状态 dir '%s' 失败：%s\n" #: src/qemu/qemu_driver.c:504 #, fuzzy, c-format msgid "Failed to create lib dir '%s': %s\n" msgstr "生成状态 dir '%s' 失败：%s\n" #: src/qemu/qemu_driver.c:510 #, fuzzy, c-format msgid "Failed to create cache dir '%s': %s\n" msgstr "生成状态 dir '%s' 失败：%s\n" #: src/qemu/qemu_driver.c:550 #, fuzzy, c-format msgid "unable to set ownership of '%s' to user %d:%d" msgstr "这个平台中没有使用控制台" #: src/qemu/qemu_driver.c:556 #, fuzzy, c-format msgid "unable to set ownership of '%s' to %d:%d" msgstr "%s：无法在 %s 中设置安全性上下文 '\\%s'：%s。" #: src/qemu/qemu_driver.c:581 #, fuzzy, c-format msgid "unable to create hugepage path %s" msgstr "为 %s 中创建 cgroup 失败\n" #: src/qemu/qemu_driver.c:588 #, fuzzy, c-format msgid "unable to set ownership on %s to %d:%d" msgstr "这个平台中没有使用控制台" #: src/qemu/qemu_driver.c:788 src/qemu/qemu_driver.c:801 #: src/qemu/qemu_driver.c:812 #, c-format msgid "Failure while reading %s startup output" msgstr "读取 %s 启动输出失败" #: src/qemu/qemu_driver.c:796 #, c-format msgid "Timed out while reading %s startup output" msgstr "读取 %s 启动输出超时" #: src/qemu/qemu_driver.c:830 #, c-format msgid "Out of space while reading %s startup output" msgstr "读取 %s 启动输出时空间不足" #: src/qemu/qemu_driver.c:867 #, c-format msgid "Failure while reading %s log output" msgstr "读取 %s 日志输出失败" #: src/qemu/qemu_driver.c:876 #, c-format msgid "Out of space while reading %s log output" msgstr "读取 %s 日志输出时空间不足" #: src/qemu/qemu_driver.c:883 #, fuzzy, c-format msgid "Process exited while reading %s log output" msgstr "读取 %s 日志输出超时" #: src/qemu/qemu_driver.c:896 #, c-format msgid "Timed out while reading %s log output" msgstr "读取 %s 日志输出超时" #: src/qemu/qemu_driver.c:926 msgid "Unable to set monitor close-on-exec flag" msgstr "无法为监视器设定 close-on-exec 标签" #: src/qemu/qemu_driver.c:931 msgid "Unable to put monitor into non-blocking mode" msgstr "无法将监视器置于无阻塞模式" #: src/qemu/qemu_driver.c:975 #, fuzzy msgid "failed to create socket" msgstr "生成套接字失败" #: src/qemu/qemu_driver.c:983 #, c-format msgid "Monitor path %s too big for destination" msgstr "" #: src/qemu/qemu_driver.c:1000 #, fuzzy msgid "failed to connect to monitor socket" msgstr "连接到客户端套接字失败" #: src/qemu/qemu_driver.c:1007 #, fuzzy msgid "monitor socket did not show up." msgstr "没有出现域 %s\n" #: src/qemu/qemu_driver.c:1032 #, c-format msgid "Unable to open monitor path %s" msgstr "无法打开监控器路径 %s" #: src/qemu/qemu_driver.c:1063 #, fuzzy, c-format msgid "unable to handle monitor type: %s" msgstr "无法打开监控器路径 %s" #: src/qemu/qemu_driver.c:1169 #, c-format msgid "Unable to close logfile: %s\n" msgstr "无法关闭日志文件：%s\n" #: src/qemu/qemu_driver.c:1176 #, c-format msgid "unable to start guest: %s" msgstr "无法启动客体：%s" #: src/qemu/qemu_driver.c:1213 #, c-format msgid "got wrong number of vCPU pids from QEMU monitor. got %d, wanted %d" msgstr "" #: src/qemu/qemu_driver.c:1255 msgid "failed to set CPU affinity" msgstr "设定 CPU 亲和性失败" #: src/qemu/qemu_driver.c:1468 #, fuzzy, c-format msgid "Failed to allocate pciDeviceList: %s\n" msgstr "分配 activeDomainList 失败" #: src/qemu/qemu_driver.c:1484 #, fuzzy, c-format msgid "Failed to reset PCI device: %s\n" msgstr "重置设备 %s 失败" #: src/qemu/qemu_driver.c:1493 #, fuzzy, c-format msgid "Failed to re-attach PCI device: %s\n" msgstr "重新附加设备 %s 失败" #: src/qemu/qemu_driver.c:1529 #, fuzzy, c-format msgid "Unable to create cgroup for %s" msgstr "为 %s 中创建 cgroup 失败\n" #: src/qemu/qemu_driver.c:1543 #, fuzzy, c-format msgid "Unable to deny all devices for %s" msgstr "为域 %s 分离设备失败" #: src/qemu/qemu_driver.c:1556 #, fuzzy, c-format msgid "Unable to allow device %s for %s" msgstr "从 %s 获得设备失败" #: src/qemu/qemu_driver.c:1565 #, fuzzy msgid "unable to allow /dev/pts/ devices" msgstr "列出节点设备失败" #: src/qemu/qemu_driver.c:1573 #, fuzzy msgid "unable to allow /dev/snd/ devices" msgstr "列出节点设备失败" #: src/qemu/qemu_driver.c:1584 src/qemu/qemu_driver.c:4823 #, fuzzy, c-format msgid "unable to allow device %s" msgstr "生成设备 %s 失败" #: src/qemu/qemu_driver.c:1617 src/qemu/qemu_driver.c:4814 #, fuzzy, c-format msgid "Unable to find cgroup for %s\n" msgstr "无法为 %s 中创建 cgroup\n" #: src/qemu/qemu_driver.c:1640 #, fuzzy, c-format msgid "unable to find cgroup for domain %s" msgstr "无法为 %s 中创建 cgroup\n" #: src/qemu/qemu_driver.c:1648 #, fuzzy, c-format msgid "unable to add domain %s task %d to cgroup" msgstr "把域 %s标记为自动开始失败" #: src/qemu/qemu_driver.c:1686 src/qemu/qemu_driver.c:1729 #: src/qemu/qemu_driver.c:1797 #, fuzzy, c-format msgid "cannot set ownership on %s" msgstr "无法解析版本 %s" #: src/qemu/qemu_driver.c:1781 #, fuzzy msgid "unable to set host device ownership on this platform" msgstr "这个平台中没有使用控制台" #: src/qemu/qemu_driver.c:1904 #, fuzzy, c-format msgid "cannot change to '%d' group" msgstr "无法更改到根目录：%s" #: src/qemu/qemu_driver.c:1912 #, fuzzy, c-format msgid "cannot change to '%d' user" msgstr "无法更改到根目录：%s" #: src/qemu/qemu_driver.c:1969 src/uml/uml_driver.c:771 msgid "VM is already active" msgstr "VM 已经激活" #: src/qemu/qemu_driver.c:1990 msgid "Unable to find an unused VNC port" msgstr "无法找到没有使用的 VNC 端口" #: src/qemu/qemu_driver.c:1998 src/uml/uml_driver.c:793 #, c-format msgid "cannot create log directory %s" msgstr "无法生成日志目录 %s" #: src/qemu/qemu_driver.c:2014 src/qemu/qemu_driver.c:4001 #, c-format msgid "Cannot find QEMU binary %s" msgstr "无法找到 QEMU 二进制 %s" #: src/qemu/qemu_driver.c:2040 #, fuzzy, c-format msgid "Cannot remove stale PID file for %s" msgstr "无法为 %s 删除配置" #: src/qemu/qemu_driver.c:2047 #, fuzzy msgid "Failed to build pidfile path." msgstr "构建池 %s 失败" #: src/qemu/qemu_driver.c:2060 src/qemu/qemu_driver.c:2063 #, c-format msgid "Unable to write envv to logfile: %s\n" msgstr "无法将 envv 写入日志文件 %s\n" #: src/qemu/qemu_driver.c:2070 src/qemu/qemu_driver.c:2073 #: src/qemu/qemu_driver.c:2078 #, c-format msgid "Unable to write argv to logfile: %s\n" msgstr "无法将 argv 写入日志文件 %s\n" #: src/qemu/qemu_driver.c:2082 #, c-format msgid "Unable to seek to end of logfile: %s\n" msgstr "无法查找日志文件尾部：%s\n" #: src/qemu/qemu_driver.c:2099 #, c-format msgid "Domain %s didn't show up\n" msgstr "没有出现域 %s\n" #: src/qemu/qemu_driver.c:2177 #, c-format msgid "Shutting down VM '%s'\n" msgstr "正在关闭 VM '%s'\n" #: src/qemu/qemu_driver.c:2182 #, c-format msgid "Failed to send SIGTERM to %s (%d)" msgstr "将 SIGTERM 发送到 %s（%d)）失败" #: src/qemu/qemu_driver.c:2232 #, c-format msgid "Failed to remove domain status for %s" msgstr "从 %s 删除域状态失败" #: src/qemu/qemu_driver.c:2237 #, fuzzy, c-format msgid "Failed to remove PID file for %s: %s" msgstr "从 %s 中删除 PCI ID '%s' 失败" #: src/qemu/qemu_driver.c:2285 #, c-format msgid "unhandled fd event %d for %s" msgstr "没有处理的 fd 事件 %d 位于 %s" #: src/qemu/qemu_driver.c:2341 #, fuzzy msgid "qemu state driver is not active" msgstr "存储池未激活" #: src/qemu/qemu_driver.c:2349 #, c-format msgid "unexpected QEMU URI path '%s', try qemu:///system" msgstr "" #: src/qemu/qemu_driver.c:2356 #, c-format msgid "unexpected QEMU URI path '%s', try qemu:///session" msgstr "" #: src/qemu/qemu_driver.c:2405 #, c-format msgid "Unable to open %s" msgstr "无法打开 tty %s" #: src/qemu/qemu_driver.c:2594 src/qemu/qemu_driver.c:6900 #, fuzzy, c-format msgid "no domain with matching name '%s'" msgstr "没有带匹配名称 %s 的域" #: src/qemu/qemu_driver.c:3033 src/uml/uml_driver.c:1394 msgid "cannot set memory of an active domain" msgstr "无法在活跃域中设定内存" #: src/qemu/qemu_driver.c:3163 #, fuzzy msgid "Invalid save image format specified in configuration file" msgstr "解析配置文件失败" #: src/qemu/qemu_driver.c:3197 src/qemu/qemu_driver.c:6770 msgid "failed to get domain xml" msgstr "获得域 xml 失败" #: src/qemu/qemu_driver.c:3205 #, c-format msgid "failed to create '%s'" msgstr "创建 '%s' 失败" #: src/qemu/qemu_driver.c:3211 msgid "failed to write save header" msgstr "写入保存标题失败" #: src/qemu/qemu_driver.c:3217 msgid "failed to write xml" msgstr "写入 xml 失败" #: src/qemu/qemu_driver.c:3223 #, c-format msgid "unable to save file %s" msgstr "无法保存文件 %s" #: src/qemu/qemu_driver.c:3324 #, fuzzy msgid "resuming after dump failed" msgstr "strdup 失败" #: src/qemu/qemu_driver.c:3354 msgid "cannot change vcpu count of an active domain" msgstr "无法更改活跃域的 vcpu 计数" #: src/qemu/qemu_driver.c:3360 src/qemu/qemu_driver.c:3573 #: src/qemu/qemu_driver.c:3608 #, c-format msgid "unknown virt type in domain definition '%d'" msgstr "域定义 '%d' 中未知的 virt 类型" #: src/qemu/qemu_driver.c:3367 msgid "could not determine max vcpus for the domain" msgstr "无法决定该域的最大 vcpu" #: src/qemu/qemu_driver.c:3373 #, c-format msgid "" "requested vcpus is greater than max allowable vcpus for the domain: %d > %d" msgstr "需要的 vcpu 大于该域最多允许的 vcpu：%d > %d" #: src/qemu/qemu_driver.c:3415 src/qemu/qemu_driver.c:3484 msgid "cannot pin vcpus on an inactive domain" msgstr "无法在活跃的域中 pin vcpu" #: src/qemu/qemu_driver.c:3421 #, c-format msgid "vcpu number out of range %d > %d" msgstr "vcpu 数超过范围 %d > %d" #: src/qemu/qemu_driver.c:3442 msgid "cannot set affinity" msgstr "无法设定亲和性" #: src/qemu/qemu_driver.c:3447 msgid "cpu affinity is not supported" msgstr "不支持 cpu 亲和性" #: src/qemu/qemu_driver.c:3512 #, fuzzy msgid "cannot get vCPU placement & pCPU time" msgstr "无法获得当前时间" #: src/qemu/qemu_driver.c:3528 msgid "cannot get affinity" msgstr "无法获得亲和性" #: src/qemu/qemu_driver.c:3538 msgid "cpu affinity is not available" msgstr "cpu 亲和性不可用" #: src/qemu/qemu_driver.c:3631 msgid "Failed to get security label" msgstr "获得安全性标签失败" #: src/qemu/qemu_driver.c:3662 #, c-format msgid "security model string exceeds max %d bytes" msgstr "安全性模式超过最大的 %d 字节" #: src/qemu/qemu_driver.c:3672 #, c-format msgid "security DOI string exceeds max %d bytes" msgstr "安全性 DOI 超过最大的 %d 字节" #: src/qemu/qemu_driver.c:3703 msgid "cannot read domain image" msgstr "无法读取域映像" #: src/qemu/qemu_driver.c:3709 msgid "failed to read qemu header" msgstr "读取 qemu 标题失败" #: src/qemu/qemu_driver.c:3715 msgid "image magic is incorrect" msgstr "image magic 不正确" #: src/qemu/qemu_driver.c:3721 #, c-format msgid "image version is not supported (%d > %d)" msgstr "映像版本不受支持（%d > %d）" #: src/qemu/qemu_driver.c:3733 msgid "failed to read XML" msgstr "读取 XML 失败" #: src/qemu/qemu_driver.c:3741 src/qemu/qemu_driver.c:6120 #: src/qemu/qemu_driver.c:6329 msgid "failed to parse XML" msgstr "解析 XML 失败" #: src/qemu/qemu_driver.c:3782 src/qemu/qemu_driver.c:6145 #: src/qemu/qemu_driver.c:6366 msgid "failed to assign new VM" msgstr "分配新的 VM 失败" #: src/qemu/qemu_driver.c:3792 #, fuzzy, c-format msgid "Invalid compressed save format %d" msgstr "无效的 vport 操作 (%d)" #: src/qemu/qemu_driver.c:3804 #, fuzzy, c-format msgid "Failed to start decompression binary %s" msgstr "开始域 %s 失败" #: src/qemu/qemu_driver.c:3839 msgid "failed to resume domain" msgstr "恢复域失败" #: src/qemu/qemu_driver.c:3913 src/qemu/qemu_driver.c:3951 #: src/xen/xen_driver.c:1085 src/xen/xen_driver.c:1124 #, fuzzy, c-format msgid "unsupported config type %s" msgstr "不支持的磁盘类型 '%s'" #: src/qemu/qemu_driver.c:4010 src/qemu/qemu_driver.c:6163 #, c-format msgid "Cannot determine QEMU argv syntax %s" msgstr "无法决定 QEMU 二进制参数语法 %s" #: src/qemu/qemu_driver.c:4379 #, c-format msgid "cannot convert disk '%s' to bus/device index" msgstr "无法将磁盘 '%s' 转换为总线/设备索引" #: src/qemu/qemu_driver.c:4405 #, c-format msgid "Unsupported disk name mapping for bus '%s'" msgstr "不支持总线 '%s' 的磁盘名称映射" #: src/qemu/qemu_driver.c:4440 #, c-format msgid "No device with bus '%s' and target '%s'" msgstr "没有总线为 '%s' 且目标为 '%s' 的设备" #: src/qemu/qemu_driver.c:4458 #, c-format msgid "" "Emulator version does not support removable media for device '%s' and target " "'%s'" msgstr "模拟器版本不支持设备 '%s' 和目标 '%s' 的可引动介质" #: src/qemu/qemu_driver.c:4498 src/qemu/qemu_driver.c:4530 #, c-format msgid "target %s already exists" msgstr "目标 %s 已存在" #: src/qemu/qemu_driver.c:4537 #, fuzzy msgid "disk source path is missing" msgstr "缺少安全性标签" #: src/qemu/qemu_driver.c:4569 #, fuzzy msgid "installed qemu version does not support host_net_add" msgstr "映像版本不受支持（%d > %d）" #: src/qemu/qemu_driver.c:4577 #, c-format msgid "" "network device type '%s' cannot be attached: qemu is not using a unix socket " "monitor" msgstr "" #: src/qemu/qemu_driver.c:4645 #, fuzzy msgid "Unable to remove network backend\n" msgstr "无法解析名称 %s" #: src/qemu/qemu_driver.c:4647 #, fuzzy, c-format msgid "Failed to remove network backend for vlan %d, net %s" msgstr "从 %s 创建网络失败" #: src/qemu/qemu_driver.c:4654 #, fuzzy, c-format msgid "Failed to close tapfd with '%s'\n" msgstr "关闭 pid 文件 '%s' : %s 失败" #: src/qemu/qemu_driver.c:4751 src/qemu/qemu_driver.c:5107 #, fuzzy, c-format msgid "hostdev mode '%s' not supported" msgstr "不支持网络类型 %d" #: src/qemu/qemu_driver.c:4769 src/qemu/qemu_driver.c:5118 #, fuzzy, c-format msgid "hostdev subsys type '%s' not supported" msgstr "不支持热查报设备类型" #: src/qemu/qemu_driver.c:4796 msgid "cannot attach device on inactive domain" msgstr "无法在非活跃的域中附加设备" #: src/qemu/qemu_driver.c:4855 #, c-format msgid "disk bus '%s' cannot be hotplugged." msgstr "无法热插拔磁盘总线 '%s'。" #: src/qemu/qemu_driver.c:4863 #, c-format msgid "disk device type '%s' cannot be hotplugged" msgstr "无法热插拔磁盘设备类型 '%s'。" #: src/qemu/qemu_driver.c:4877 #, c-format msgid "device type '%s' cannot be attached" msgstr "无法附加设备类型 '%s'" #: src/qemu/qemu_driver.c:4915 #, c-format msgid "disk %s not found" msgstr "未找到磁盘 %s" #: src/qemu/qemu_driver.c:4921 #, fuzzy, c-format msgid "disk %s cannot be detached - no PCI address for device" msgstr "无法分离磁盘 %s - 无效插槽号码 %d" #: src/qemu/qemu_driver.c:4972 #, c-format msgid "network device %02x:%02x:%02x:%02x:%02x:%02x not found" msgstr "" #: src/qemu/qemu_driver.c:4981 msgid "network device cannot be detached - device state missing" msgstr "" #: src/qemu/qemu_driver.c:5041 #, c-format msgid "host pci device %.4x:%.2x:%.2x.%.1x not found" msgstr "" #: src/qemu/qemu_driver.c:5051 #, fuzzy msgid "hostdev cannot be detached - device state missing" msgstr "无法在非活跃的域中分离设备" #: src/qemu/qemu_driver.c:5152 msgid "cannot detach device on inactive domain" msgstr "无法在非活跃的域中分离设备" #: src/qemu/qemu_driver.c:5177 msgid "only SCSI or virtio disk device can be detached dynamically" msgstr "只能多台分离 SCSI 或者 virtio 磁盘设备" #: src/qemu/qemu_driver.c:5340 src/qemu/qemu_driver.c:5411 #, fuzzy, c-format msgid "cannot find cgroup for domain %s" msgstr "无法为域 %d 读取 cputime" #: src/qemu/qemu_driver.c:5358 #, fuzzy msgid "unable to set cpu shares tunable" msgstr "无法获得当前时间" #: src/qemu/qemu_driver.c:5418 #, fuzzy msgid "unable to get cpu shares tunable" msgstr "无法获得当前时间" #: src/qemu/qemu_driver.c:5425 msgid "Field cpu_shares too long for destination" msgstr "" #: src/qemu/qemu_driver.c:5480 src/test/test_driver.c:2210 #, c-format msgid "invalid path: %s" msgstr "无效路径：%s" #: src/qemu/qemu_driver.c:5547 src/test/test_driver.c:2265 #, c-format msgid "invalid path, '%s' is not a known interface" msgstr "无效路径，'%s' 是未知接口" #: src/qemu/qemu_driver.c:5590 src/uml/uml_driver.c:1747 msgid "NULL or empty path" msgstr "NULL 或者空路径" #: src/qemu/qemu_driver.c:5609 #, c-format msgid "%s: failed to open" msgstr "%s：打开文件失败" #: src/qemu/qemu_driver.c:5620 #, c-format msgid "%s: failed to seek or read" msgstr "%s：查找并读取失败" #: src/qemu/qemu_driver.c:5627 src/uml/uml_driver.c:1784 msgid "invalid path" msgstr "无效路径" #: src/qemu/qemu_driver.c:5681 #, c-format msgid "mkstemp(\"%s\") failed" msgstr "mkstemp(\"%s\") 失败" #: src/qemu/qemu_driver.c:5696 #, c-format msgid "failed to read temporary file created with template %s" msgstr "读取使用模板 %s 创建的临时文件失败" #: src/qemu/qemu_driver.c:5825 src/qemu/qemu_driver.c:5862 #: src/qemu/qemu_driver.c:5928 src/qemu/qemu_driver.c:6042 msgid "stream is not open" msgstr "" #: src/qemu/qemu_driver.c:5832 src/qemu/qemu_driver.c:5869 #, fuzzy msgid "stream does not have a callback registered" msgstr "网络 '%s' 没有桥接名称。" #: src/qemu/qemu_driver.c:5935 msgid "stream already has a callback registered" msgstr "" #: src/qemu/qemu_driver.c:5945 #, fuzzy msgid "cannot register file watch on stream" msgstr "无法设定文件拥有者 '%s'" #: src/qemu/qemu_driver.c:6058 #, fuzzy msgid "cannot write to stream" msgstr "无法等待 '%s'" #: src/qemu/qemu_driver.c:6102 src/qemu/qemu_driver.c:6266 msgid "no domain XML passed" msgstr "没有给出域 XML" #: src/qemu/qemu_driver.c:6107 msgid "PrepareTunnel called but no TUNNELLED flag set" msgstr "" #: src/qemu/qemu_driver.c:6112 msgid "tunnelled migration requested but NULL stream passed" msgstr "" #: src/qemu/qemu_driver.c:6134 src/qemu/qemu_driver.c:6355 #, c-format msgid "domain with the same name or UUID already exists as '%s'" msgstr "有相同名称或者 UUID 的域已经作为 '%s' 存在" #: src/qemu/qemu_driver.c:6173 msgid "Destination qemu is too old to support tunnelled migration" msgstr "" #: src/qemu/qemu_driver.c:6200 #, c-format msgid "cannot open unix socket '%s' for tunnelled migration" msgstr "" #: src/qemu/qemu_driver.c:6260 msgid "Tunnelled migration requested but invalid RPC method called" msgstr "" #: src/qemu/qemu_driver.c:6310 #, fuzzy msgid "only tcp URIs are supported for KVM/QEMU migrations" msgstr "KVM 迁移只支持 tcp URI" #: src/qemu/qemu_driver.c:6320 msgid "URI did not have ':port' at the end" msgstr "URI 末端没有 ':port'" #: src/qemu/qemu_driver.c:6346 msgid "could not generate random UUID" msgstr "无法生成随机 UUID" #: src/qemu/qemu_driver.c:6439 #, fuzzy, c-format msgid "cannot parse URI %s" msgstr "无法解析 PCI 总线 '%s'" #: src/qemu/qemu_driver.c:6462 msgid "migrate did not successfully complete" msgstr "" #: src/qemu/qemu_driver.c:6487 msgid "tunnelled migration failed to read from qemu" msgstr "" #: src/qemu/qemu_driver.c:6496 #, fuzzy msgid "Failed to write migration data to remote libvirtd" msgstr "写 socket %d 失败\n" #: src/qemu/qemu_driver.c:6553 #, fuzzy msgid "cannot open tunnelled migration socket" msgstr "无法打开套接字" #: src/qemu/qemu_driver.c:6561 #, c-format msgid "Unix socket '%s' too big for destination" msgstr "" #: src/qemu/qemu_driver.c:6568 #, c-format msgid "Cannot bind to unix socket '%s' for tunnelled migration" msgstr "" #: src/qemu/qemu_driver.c:6574 #, c-format msgid "Cannot listen on unix socket '%s' for tunnelled migration" msgstr "" #: src/qemu/qemu_driver.c:6582 #, fuzzy, c-format msgid "Cannot extract Qemu version from '%s'" msgstr "无法提取磁盘设备" #: src/qemu/qemu_driver.c:6590 msgid "Source qemu is too old to support tunnelled migration" msgstr "" #: src/qemu/qemu_driver.c:6624 msgid "tunnelled migration monitor command failed" msgstr "" #: src/qemu/qemu_driver.c:6643 #, fuzzy msgid "migrate failed" msgstr "迁移失败： %s" #: src/qemu/qemu_driver.c:6652 msgid "tunnelled migration failed to accept from qemu" msgstr "" #: src/qemu/qemu_driver.c:6757 #, fuzzy, c-format msgid "Failed to connect to remote libvirt URI %s" msgstr "不能连接到 '%s'" #: src/qemu/qemu_driver.c:6763 msgid "Destination libvirt does not support peer-to-peer migration protocol" msgstr "" #: src/qemu/qemu_driver.c:6864 #, c-format msgid "Failed to resume guest %s after failure\n" msgstr "失败后恢复客体 %s 失败\n" #: src/qemu/qemu_driver.c:6981 src/xen/xen_driver.c:1576 #, c-format msgid "device %s is not a PCI device" msgstr "设备 %s 不是 PCI 设备" #: src/qemu/qemu_monitor_text.c:407 #, fuzzy, c-format msgid "missing for volume %s" msgstr "丢失设备的源代码信息 %s" #: src/qemu/qemu_monitor_text.c:410 #, c-format msgid "unexpected passphrase request for volume %s" msgstr "" #: src/qemu/qemu_monitor_text.c:429 src/storage/storage_backend.c:385 #, fuzzy msgid "secret storage not supported" msgstr "不支持网络类型 %d" #: src/qemu/qemu_monitor_text.c:442 #, fuzzy, c-format msgid "invalid for volume %s" msgstr "无效的连接指向 %s" #: src/qemu/qemu_monitor_text.c:460 #, c-format msgid "format='qcow' passphrase for %s must not contain a '\\0'" msgstr "" #: src/qemu/qemu_monitor_text.c:546 #, fuzzy msgid "cannot stop CPU execution" msgstr "无法解析 PCI 插槽 '%s'" #: src/qemu/qemu_monitor_text.c:561 #, fuzzy msgid "system shutdown operation failed" msgstr "关闭操作失败" #: src/qemu/qemu_monitor_text.c:582 msgid "cannot run monitor command to fetch CPU thread info" msgstr "无法运行监视器命令提取 CPU 线程信息" #: src/qemu/qemu_monitor_text.c:673 msgid "could not query memory balloon allocation" msgstr "无法查询内存布尔值分配" #: src/qemu/qemu_monitor_text.c:683 #, fuzzy, c-format msgid "could not parse memory balloon allocation from '%s'" msgstr "无法解析内存布尔值分配" #: src/qemu/qemu_monitor_text.c:720 msgid "'info blockstats' command failed" msgstr "'info blockstats' 命令失败" #: src/qemu/qemu_monitor_text.c:732 msgid "'info blockstats' not supported by this qemu" msgstr "这个 qemu 不支持 'info blockstats'" #: src/qemu/qemu_monitor_text.c:800 #, fuzzy, c-format msgid "no stats found for device %s" msgstr "无法提取声音设备" #: src/qemu/qemu_monitor_text.c:820 msgid "setting VNC password failed" msgstr "设定 VNC 密码失败" #: src/qemu/qemu_monitor_text.c:852 msgid "could not balloon memory allocation" msgstr "无法进行内存布尔值分配" #: src/qemu/qemu_monitor_text.c:888 src/qemu/qemu_monitor_text.c:934 #, fuzzy, c-format msgid "could not eject media on %s" msgstr "无法执行 %s" #: src/qemu/qemu_monitor_text.c:897 src/qemu/qemu_monitor_text.c:943 #, fuzzy, c-format msgid "could not eject media on %s: %s" msgstr "无法执行 %s" #: src/qemu/qemu_monitor_text.c:979 #, fuzzy, c-format msgid "could save memory region to '%s'" msgstr "无法解析设备 %s" #: src/qemu/qemu_monitor_text.c:1035 #, fuzzy msgid "could restrict migration speed" msgstr "获得界面信息失败" #: src/qemu/qemu_monitor_text.c:1077 msgid "cannot query migration status" msgstr "" #: src/qemu/qemu_monitor_text.c:1088 #, fuzzy, c-format msgid "unexpected migration status in %s" msgstr "意外的域类型 %d" #: src/qemu/qemu_monitor_text.c:1101 #, fuzzy, c-format msgid "cannot parse migration data transferred statistic %s" msgstr "无法从目标 '%s' 中解析分区号码" #: src/qemu/qemu_monitor_text.c:1112 #, fuzzy, c-format msgid "cannot parse migration data remaining statistic %s" msgstr "无法从目标 '%s' 中解析分区号码" #: src/qemu/qemu_monitor_text.c:1123 #, fuzzy, c-format msgid "cannot parse migration data total statistic %s" msgstr "无法从目标 '%s' 中解析分区号码" #: src/qemu/qemu_monitor_text.c:1167 #, fuzzy, c-format msgid "unable to start migration to %s" msgstr "无法启动客体：%s" #: src/qemu/qemu_monitor_text.c:1174 #, fuzzy, c-format msgid "migration to '%s' failed: %s" msgstr "迁移失败： %s" #: src/qemu/qemu_monitor_text.c:1181 #, fuzzy, c-format msgid "migration to '%s' not supported by this qemu: %s" msgstr "这个 qemu 不支持 'migrate'" #: src/qemu/qemu_monitor_text.c:1284 #, fuzzy msgid "cannot run monitor command to cancel migration" msgstr "无法运行监视器命令提取 CPU 线程信息" #: src/qemu/qemu_monitor_text.c:1316 #, fuzzy msgid "cannot run monitor command to add usb disk" msgstr "无法运行监视器命令提取 CPU 线程信息" #: src/qemu/qemu_monitor_text.c:1324 #, fuzzy, c-format msgid "unable to add USB disk %s: %s" msgstr "无法打开 tty %s: %s\n" #: src/qemu/qemu_monitor_text.c:1351 msgid "cannot attach usb device" msgstr "无法附加 usb 设备" #: src/qemu/qemu_monitor_text.c:1359 msgid "adding usb device failed" msgstr "添加 usb 设备失败" #: src/qemu/qemu_monitor_text.c:1440 #, fuzzy, c-format msgid "Unable to parse domain number '%s'\n" msgstr "无法解析插槽号码\n" #: src/qemu/qemu_monitor_text.c:1445 src/qemu/qemu_monitor_text.c:1463 #, c-format msgid "Expected ', ' parsing pci_add reply '%s'\n" msgstr "" #: src/qemu/qemu_monitor_text.c:1452 #, c-format msgid "Expected 'bus ' parsing pci_add reply '%s'\n" msgstr "" #: src/qemu/qemu_monitor_text.c:1458 #, fuzzy, c-format msgid "Unable to parse bus number '%s'\n" msgstr "无法解析插槽号码\n" #: src/qemu/qemu_monitor_text.c:1469 #, c-format msgid "Expected 'slot ' parsing pci_add reply '%s'\n" msgstr "" #: src/qemu/qemu_monitor_text.c:1475 #, fuzzy, c-format msgid "Unable to parse slot number '%s'\n" msgstr "无法解析插槽号码\n" #: src/qemu/qemu_monitor_text.c:1511 #, fuzzy msgid "cannot attach host pci device" msgstr "无法附加 usb 设备" #: src/qemu/qemu_monitor_text.c:1526 src/qemu/qemu_monitor_text.c:1624 #, fuzzy, c-format msgid "parsing pci_add reply failed: %s" msgstr "更改光盘介质失败：%s" #: src/qemu/qemu_monitor_text.c:1569 #, fuzzy, c-format msgid "cannot attach %s disk %s" msgstr "无法附加 %s 磁盘" #: src/qemu/qemu_monitor_text.c:1583 #, fuzzy, c-format msgid "adding %s disk failed %s: %s" msgstr "添加 %s 磁盘失败" #: src/qemu/qemu_monitor_text.c:1617 #, fuzzy, c-format msgid "failed to add NIC with '%s'" msgstr "在 %s 中添加 %s 设备失败" #: src/qemu/qemu_monitor_text.c:1666 #, fuzzy msgid "failed to remove PCI device" msgstr "重置设备 %s 失败" #: src/qemu/qemu_monitor_text.c:1685 #, fuzzy, c-format msgid "failed to detach PCI device, invalid address %.4x:%.2x:%.2x: %s" msgstr "分离磁盘 %s 失败：无效插槽 %d" #: src/qemu/qemu_monitor_text.c:1717 #, fuzzy, c-format msgid "failed to pass fd to qemu with '%s'" msgstr "解析目标 '%s' 失败" #: src/qemu/qemu_monitor_text.c:1725 #, fuzzy, c-format msgid "qemu does not support sending of file handles: %s" msgstr "设置 stdin 文件处理失败" #: src/qemu/qemu_monitor_text.c:1756 src/qemu/qemu_monitor_text.c:1795 #, fuzzy, c-format msgid "failed to close fd in qemu with '%s'" msgstr "解析目标 '%s' 失败" #: src/qemu/qemu_monitor_text.c:1764 #, fuzzy, c-format msgid "qemu does not support closing of file handles: %s" msgstr "无法保存配置文件软件" #: src/qemu/qemu_monitor_text.c:1828 #, fuzzy, c-format msgid "failed to remove host metnwork in qemu with '%s'" msgstr "从 %s 创建网络失败" #: src/remote/remote_driver.c:328 msgid "failed to find libvirtd binary" msgstr "查找 libvirtd 二进制码失败" #: src/remote/remote_driver.c:410 msgid "" "remote_open: transport in URL not recognised (should be tls|unix|ssh|ext|tcp)" msgstr "remote_open：URL 中的传输无法识别（应该是 tls|unix|ssh|ext|tcp）" #: src/remote/remote_driver.c:568 msgid "remote_open: for 'ext' transport, command is required" msgstr "remote_open：'ext' 传输需要命令" #: src/remote/remote_driver.c:590 src/xen/xend_internal.c:809 #, c-format msgid "unable to resolve hostname '%s': %s" msgstr "无法解析主机名 '%s'：%s" #: src/remote/remote_driver.c:641 #, fuzzy, c-format msgid "unable to connect to libvirtd at '%s'" msgstr "不能连接到 '%s'" #: src/remote/remote_driver.c:687 #, c-format msgid "Socket %s too big for destination" msgstr "" #: src/remote/remote_driver.c:697 msgid "unable to create socket" msgstr "无法生成套接字" #: src/remote/remote_driver.c:721 #, c-format msgid "unable to connect to '%s'" msgstr "不能连接到 '%s'" #: src/remote/remote_driver.c:787 msgid "unable to create socket pair" msgstr "无法创建套接字对" #: src/remote/remote_driver.c:807 msgid "transport methods unix, ssh and ext are not supported under Windows" msgstr "Windows 中不支持 unix、ssh 以及 ext 传输方法 " #: src/remote/remote_driver.c:816 msgid "unable to make socket non-blocking" msgstr "无法将套接字置于无阻塞模式" #: src/remote/remote_driver.c:822 msgid "unable to make pipe" msgstr "无法生成管道" #: src/remote/remote_driver.c:856 msgid "unable to auto-detect URI" msgstr "无法自动侦测 URI" #: src/remote/remote_driver.c:873 msgid "Error allocating callbacks list" msgstr "分配回调列表出错" #: src/remote/remote_driver.c:878 msgid "Error allocating domainEvents" msgstr "分配域事件出错" #: src/remote/remote_driver.c:1097 #, c-format msgid "Cannot access %s '%s'" msgstr "无法访问 %s '%s'" #: src/remote/remote_driver.c:1119 #, c-format msgid "unable to allocate TLS credentials: %s" msgstr "无法分配 TLS 证书：%s" #: src/remote/remote_driver.c:1139 #, c-format msgid "unable to load CA certificate: %s" msgstr "无法载入 CA 证书：%s" #: src/remote/remote_driver.c:1154 #, c-format msgid "unable to load private key/certificate: %s" msgstr "无法载入专用密钥/证书：%s" #: src/remote/remote_driver.c:1183 #, c-format msgid "unable to initialize TLS client: %s" msgstr "无法初始化 TLS 客户端：%s" #: src/remote/remote_driver.c:1192 #, c-format msgid "unable to set TLS algorithm priority: %s" msgstr "无法设定 TLS 算法优选级：%s" #: src/remote/remote_driver.c:1201 #, c-format msgid "unable to set certificate priority: %s" msgstr "无法设定证书优先级：%s" #: src/remote/remote_driver.c:1211 #, c-format msgid "unable to set session credentials: %s" msgstr "无法设定会话证书： %s" #: src/remote/remote_driver.c:1226 #, c-format msgid "unable to complete TLS handshake: %s" msgstr "无法完成 TLS 握手：%s" #: src/remote/remote_driver.c:1248 #, c-format msgid "unable to complete TLS initialization: %s" msgstr "无法完成 TLS 初始化：%s" #: src/remote/remote_driver.c:1254 msgid "server verification (of our certificate or IP address) failed\n" msgstr "服务器审核失败（使用我们的证书或者 IP 地址）\n" #: src/remote/remote_driver.c:1279 #, c-format msgid "unable to verify server certificate: %s" msgstr "无法验证服务器证书：%s" #: src/remote/remote_driver.c:1286 msgid "cannot get current time" msgstr "无法获得当前时间" #: src/remote/remote_driver.c:1291 msgid "Invalid certificate" msgstr "无效证书" #: src/remote/remote_driver.c:1294 msgid "The certificate is not trusted." msgstr "该证书不可信。" #: src/remote/remote_driver.c:1297 msgid "The certificate hasn't got a known issuer." msgstr "该证书没有公认发行人。" #: src/remote/remote_driver.c:1300 msgid "The certificate has been revoked." msgstr "证书已撤销。" #: src/remote/remote_driver.c:1304 msgid "The certificate uses an insecure algorithm" msgstr "该证书使用不安全的算法" #: src/remote/remote_driver.c:1308 #, c-format msgid "server certificate failed validation: %s" msgstr "服务器证书验证失败：%s" #: src/remote/remote_driver.c:1314 msgid "Certificate type is not X.509" msgstr "证书类型不是 X.509" #: src/remote/remote_driver.c:1319 msgid "gnutls_certificate_get_peers failed" msgstr "gnutls_certificate_get_peers 失败" #: src/remote/remote_driver.c:1329 #, c-format msgid "unable to initialize certificate: %s" msgstr "无法初始化证书 %s " #: src/remote/remote_driver.c:1337 #, c-format msgid "unable to import certificate: %s" msgstr "无法导入证书：%s" #: src/remote/remote_driver.c:1344 msgid "The certificate has expired" msgstr "证书过期" #: src/remote/remote_driver.c:1350 msgid "The certificate is not yet activated" msgstr "证书还没有激活" #: src/remote/remote_driver.c:1358 #, c-format msgid "Certificate's owner does not match the hostname (%s)" msgstr "证书拥有者与主机名（%s）不匹配" #: src/remote/remote_driver.c:1659 #, c-format msgid "too many NUMA cells: %d > %d" msgstr "NUMA 单元过多：%d > %d" #: src/remote/remote_driver.c:1722 src/remote/remote_driver.c:1736 #, c-format msgid "too many remote domain IDs: %d > %d" msgstr "远程域 ID 过多：%d > %d" #: src/remote/remote_driver.c:2240 #, c-format msgid "map length greater than maximum: %d > %d" msgstr "映像长度大于最大值：%d > %d" #: src/remote/remote_driver.c:2279 #, c-format msgid "vCPU count exceeds maximum: %d > %d" msgstr "vCPU 计数超过最大值：%d > %d" #: src/remote/remote_driver.c:2285 #, c-format msgid "vCPU map buffer length exceeds maximum: %d > %d" msgstr "vCPU 映像缓冲长度超过最大值：%d > %d" #: src/remote/remote_driver.c:2302 #, c-format msgid "host reports too many vCPUs: %d > %d" msgstr "主机报告太多 vCPU：%d > %d" #: src/remote/remote_driver.c:2308 #, c-format msgid "host reports map buffer length exceeds maximum: %d > %d" msgstr "主机报告映像缓冲长度超过最大值：%d > %d" #: src/remote/remote_driver.c:2383 #, c-format msgid "security label exceeds maximum: %zd" msgstr "安全性标签超过最大值：%zd" #: src/remote/remote_driver.c:2418 #, c-format msgid "security model exceeds maximum: %zd" msgstr "安全性模式超过最大值：%zd " #: src/remote/remote_driver.c:2427 #, c-format msgid "security doi exceeds maximum: %zd" msgstr "安全性 doi 超过最大值：%zd " #: src/remote/remote_driver.c:2730 src/remote/remote_driver.c:2744 #, c-format msgid "too many remote domain names: %d > %d" msgstr "太多远程域名：%d > %d" #: src/remote/remote_driver.c:3028 msgid "" "remoteDomainGetSchedulerParameters: returned number of parameters exceeds " "limit" msgstr "remoteDomainGetSchedulerParameters：返回的参数数值超过限制" #: src/remote/remote_driver.c:3038 #, c-format msgid "Parameter %s too big for destination" msgstr "" #: src/remote/remote_driver.c:3058 msgid "remoteDomainGetSchedulerParameters: unknown parameter type" msgstr "remoteDomainGetSchedulerParameters：未知参数类型" #: src/remote/remote_driver.c:3089 msgid "out of memory allocating array" msgstr "分配阵列时内存溢出" #: src/remote/remote_driver.c:3116 msgid "unknown parameter type" msgstr "未知参数类型" #: src/remote/remote_driver.c:3227 #, c-format msgid "block peek request too large for remote protocol, %zi > %d" msgstr "为远程协议请求的块 peek 过大，%zi > %d" #: src/remote/remote_driver.c:3248 src/remote/remote_driver.c:3299 msgid "returned buffer is not same size as requested" msgstr "返回的缓冲和请求的大小不同" #: src/remote/remote_driver.c:3279 #, c-format msgid "memory peek request too large for remote protocol, %zi > %d" msgstr "为远程协议请求的内存 peek 过大，%zi > %d" #: src/remote/remote_driver.c:3411 src/remote/remote_driver.c:3425 #: src/remote/remote_driver.c:3484 src/remote/remote_driver.c:3498 #, c-format msgid "too many remote networks: %d > %d" msgstr "太多远程网络：%d > %d" #: src/remote/remote_driver.c:3900 src/remote/remote_driver.c:3914 #: src/remote/remote_driver.c:3972 src/remote/remote_driver.c:3986 #, fuzzy, c-format msgid "too many remote interfaces: %d > %d" msgstr "太多远程网络：%d > %d" #: src/remote/remote_driver.c:4296 src/remote/remote_driver.c:4365 msgid "too many storage pools requested" msgstr "存储池请求过多" #: src/remote/remote_driver.c:4308 src/remote/remote_driver.c:4377 msgid "too many storage pools received" msgstr "收到的存储池过多" #: src/remote/remote_driver.c:4871 msgid "too many storage volumes requested" msgstr "存储卷请求过多" #: src/remote/remote_driver.c:4884 msgid "too many storage volumes received" msgstr "接收到的存储卷过多" #: src/remote/remote_driver.c:5270 msgid "too many device names requested" msgstr "设备名称请求过多" #: src/remote/remote_driver.c:5284 msgid "too many device names received" msgstr "接收到的设备名称过多" #: src/remote/remote_driver.c:5424 msgid "too many capability names requested" msgstr "能力名称请求过多" #: src/remote/remote_driver.c:5437 msgid "too many capability names received" msgstr "接收到的能力名称过多" #: src/remote/remote_driver.c:5622 #, c-format msgid "unknown authentication type %s" msgstr "未知验证类型 %s" #: src/remote/remote_driver.c:5632 #, c-format msgid "requested authentication type %s rejected" msgstr "请求的验证类型 %s 被拒绝" #: src/remote/remote_driver.c:5673 #, c-format msgid "unsupported authentication type %d" msgstr "不支持的验证类型 %d" #: src/remote/remote_driver.c:5915 #, c-format msgid "failed to initialize SASL library: %d (%s)" msgstr "初始化 SASL 程序库验证失败：%d（%s）" #: src/remote/remote_driver.c:5924 msgid "failed to get sock address" msgstr "无法获得 sock 地址" #: src/remote/remote_driver.c:5934 msgid "failed to get peer address" msgstr "无法获得 peer 地址" #: src/remote/remote_driver.c:5959 #, c-format msgid "Failed to create SASL client context: %d (%s)" msgstr "创建 SASL 客户端环境失败：%d（%s）" #: src/remote/remote_driver.c:5972 msgid "invalid cipher size for TLS session" msgstr "对 TLS 会话无效的密码大小" #: src/remote/remote_driver.c:5982 #, c-format msgid "cannot set external SSF %d (%s)" msgstr "无法设定外部 SSF %d（%s）" #: src/remote/remote_driver.c:6001 #, c-format msgid "cannot set security props %d (%s)" msgstr "无法设定安全支持 %d（%s）" #: src/remote/remote_driver.c:6020 #, c-format msgid "SASL mechanism %s not supported by server" msgstr "服务器不支持 SASL 机制 %s" #: src/remote/remote_driver.c:6039 #, c-format msgid "Failed to start SASL negotiation: %d (%s)" msgstr "启动 SASL 协商失败：%d（%s）" #: src/remote/remote_driver.c:6057 src/remote/remote_driver.c:6135 msgid "Failed to make auth credentials" msgstr "生成验证证书失败" #: src/remote/remote_driver.c:6081 #, c-format msgid "SASL negotiation data too long: %d bytes" msgstr "SASL 协商数据过长：%d 字节" #: src/remote/remote_driver.c:6121 #, c-format msgid "Failed SASL step: %d (%s)" msgstr "SASL 步骤失败：%d（%s）" #: src/remote/remote_driver.c:6205 #, c-format msgid "negotiation SSF %d was not strong enough" msgstr "协商 SSF %d 不够强大" #: src/remote/remote_driver.c:6280 msgid "Failed to collect auth credentials" msgstr "收集验证证书失败" #: src/remote/remote_driver.c:6315 msgid "no event support" msgstr "没有事件支持" #: src/remote/remote_driver.c:6320 msgid "adding cb to list" msgstr "在列表中添加 cb" #: src/remote/remote_driver.c:6350 #, fuzzy msgid "marking cb for deletion" msgstr "域 vcpu 的信息" #: src/remote/remote_driver.c:6356 #, fuzzy msgid "removing cb from list" msgstr "从列表中删除 cb" #: src/remote/remote_driver.c:6477 src/remote/remote_driver.c:6490 #, fuzzy, c-format msgid "too many remote secret UUIDs: %d > %d" msgstr "远程域 ID 过多：%d > %d" #: src/remote/remote_driver.c:6780 src/remote/remote_driver.c:7138 msgid "xdr_remote_message_header failed" msgstr "xdr_remote_message_header 失败" #: src/remote/remote_driver.c:6790 #, c-format msgid "data size %zu too large for payload %d" msgstr "" #: src/remote/remote_driver.c:6803 src/remote/remote_driver.c:7161 msgid "xdr_u_int (length word)" msgstr "xdr_u_int (length word)" #: src/remote/remote_driver.c:7144 msgid "marshalling args" msgstr "marshalling args" #: src/remote/remote_driver.c:7207 msgid "cannot send data" msgstr "无法发送数据" #: src/remote/remote_driver.c:7238 #, c-format msgid "failed to read from TLS socket %s" msgstr "从 TLS 套接字读取 %s" #: src/remote/remote_driver.c:7243 src/remote/remote_driver.c:7261 msgid "server closed connection" msgstr "服务器关闭连接" #: src/remote/remote_driver.c:7257 msgid "cannot recv data" msgstr "无法 recv 数据" #: src/remote/remote_driver.c:7290 #, c-format msgid "failed to encode SASL data: %s" msgstr "编码 SASL 数据失败：%s " #: src/remote/remote_driver.c:7393 #, c-format msgid "failed to decode SASL data: %s" msgstr "解码 SAL 数据失败：%s" #: src/remote/remote_driver.c:7444 msgid "xdr_u_int (length word, reply)" msgstr "xdr_u_int (length word, reply)" #: src/remote/remote_driver.c:7451 msgid "packet received from server too small" msgstr "从服务器接收的数据包过小" #: src/remote/remote_driver.c:7460 msgid "packet received from server too large" msgstr "从服务器接收的数据包过大" #: src/remote/remote_driver.c:7506 msgid "invalid header in reply" msgstr "回复中的无效标题" #: src/remote/remote_driver.c:7517 #, c-format msgid "unknown program (received %x, expected %x)" msgstr "未知程序（接收 %x，预期的是 %x）" #: src/remote/remote_driver.c:7525 #, c-format msgid "unknown protocol version (received %x, expected %x)" msgstr "未知协议版本（接收 %x，预期的是 %x）" #: src/remote/remote_driver.c:7551 #, c-format msgid "got unexpected RPC call %d from server" msgstr "从服务器获得以外 RPC 调用 %d" #: src/remote/remote_driver.c:7580 #, c-format msgid "no call waiting for reply with serial %d" msgstr "没有用于等待回应串口 %d 的调用" #: src/remote/remote_driver.c:7589 #, c-format msgid "unknown procedure (received %x, expected %x)" msgstr "未知过程（接收 %x，预期的是 %x）" #: src/remote/remote_driver.c:7602 msgid "unmarshalling ret" msgstr "unmarshalling ret" #: src/remote/remote_driver.c:7612 src/remote/remote_driver.c:7733 msgid "unmarshalling remote_error" msgstr "unmarshalling remote_error" #: src/remote/remote_driver.c:7621 #, c-format msgid "unknown status (received %x)" msgstr "未知状态（接收 %x）" #: src/remote/remote_driver.c:7861 msgid "poll on socket failed" msgstr "poll on 套接字失败" #: src/remote/remote_driver.c:7922 msgid "received hangup / error event on socket" msgstr "在套接字中收到 hangup / error 事件" #: src/remote/remote_driver.c:8016 msgid "failed to wait on condition" msgstr "等待命令失败：%s" #: src/remote/remote_driver.c:8153 #, fuzzy msgid "remoteDomainProcessEvent: unmarshalling msg" msgstr "remoteDomainProcessEvent: unmarshalling ret" #: src/secret/secret_driver.c:170 #, fuzzy, c-format msgid "mkstemp('%s') failed" msgstr "mkstemp(\"%s\") 失败" #: src/secret/secret_driver.c:174 #, fuzzy, c-format msgid "fchmod('%s') failed" msgstr "mkstemp(\"%s\") 失败" #: src/secret/secret_driver.c:180 #, fuzzy, c-format msgid "error writing to '%s'" msgstr "向 pid 文件 '%s' : %s 写入失败" #: src/secret/secret_driver.c:185 #, fuzzy, c-format msgid "error closing '%s'" msgstr "无法关闭文件 '%s'" #: src/secret/secret_driver.c:191 #, fuzzy, c-format msgid "rename(%s, %s) failed" msgstr "mkstemp(\"%s\") 失败" #: src/secret/secret_driver.c:242 #, fuzzy, c-format msgid "cannot create '%s'" msgstr "无法创建路径 '%s'" #: src/secret/secret_driver.c:349 #, c-format msgid " does not match secret file name '%s'" msgstr "" #: src/secret/secret_driver.c:376 src/secret/secret_driver.c:483 #, fuzzy, c-format msgid "cannot open '%s'" msgstr "无法打开 %s" #: src/secret/secret_driver.c:380 #, fuzzy, c-format msgid "cannot stat '%s'" msgstr "无法 stat：%s" #: src/secret/secret_driver.c:385 #, c-format msgid "'%s' file does not fit in memory" msgstr "" #: src/secret/secret_driver.c:394 #, fuzzy, c-format msgid "cannot read '%s'" msgstr "无法读取 %s" #: src/secret/secret_driver.c:402 #, fuzzy, c-format msgid "invalid base64 in '%s'" msgstr "无效的参数 %s" #: src/secret/secret_driver.c:499 #, fuzzy, c-format msgid "Error reading secret: %s\n" msgstr "重新载入驱动程序时出错" #: src/secret/secret_driver.c:630 src/secret/secret_driver.c:798 #: src/secret/secret_driver.c:832 src/secret/secret_driver.c:884 #: src/secret/secret_driver.c:930 #, fuzzy, c-format msgid "no secret with matching uuid '%s'" msgstr "没有匹配 uuid '%s' 的域" #: src/secret/secret_driver.c:657 #, fuzzy, c-format msgid "no secret with matching usage '%s'" msgstr "没有匹配名称 '%s' 的网络" #: src/secret/secret_driver.c:697 #, fuzzy, c-format msgid "a secret with UUID %s already defined for use with %s" msgstr "域名 '%s' 已经定义" #: src/secret/secret_driver.c:717 #, fuzzy, c-format msgid "a secret with UUID %s is already defined for use with %s" msgstr "域名 '%s' 已经定义" #: src/secret/secret_driver.c:724 msgid "cannot change private flag on existing secret" msgstr "" #: src/secret/secret_driver.c:772 msgid "list of secrets is inconsistent" msgstr "" #: src/secret/secret_driver.c:892 #, fuzzy, c-format msgid "secret '%s' does not have a value" msgstr "网络 '%s' 没有桥接名称。" #: src/secret/secret_driver.c:899 msgid "secret is private" msgstr "" #: src/secret/secret_driver.c:1022 #, fuzzy msgid "Out of memory initializing secrets" msgstr "分配客户端时内存溢出" #: src/security/security_driver.c:53 #, c-format msgid "invalid security model '%s'" msgstr "无效安全性模式 '%s'" #: src/security/security_driver.c:127 #, c-format msgid "%s: DOI '%s' is longer than the maximum allowed length of %d" msgstr "%s：DOI '%s' 超过了允许的最大 %d 长度" #: src/security/security_apparmor.c:72 #, fuzzy, c-format msgid "Failed to read AppArmor profiles list '%s'" msgstr "创建 '%s' 失败" #: src/security/security_apparmor.c:116 #, fuzzy msgid "profile name exceeds maximum length" msgstr "%s：安全性标签超过最大长度：%d" #: src/security/security_apparmor.c:125 #, fuzzy, c-format msgid "Failed to read '%s'" msgstr "创建 '%s' 失败" #: src/security/security_apparmor.c:161 #, fuzzy msgid "unable to create pipe" msgstr "创建管道失败" #: src/security/security_apparmor.c:196 #, fuzzy msgid "unable to write to pipe" msgstr "写入失败" #: src/security/security_apparmor.c:208 #, fuzzy, c-format msgid "Unexpected exit status from virt-aa-helper %d pid %lu" msgstr "来自 %d pid %lu 的意外退出状态" #: src/security/security_apparmor.c:269 #, fuzzy msgid "could not find libvirtd" msgstr "查找 libvirtd 二进制码失败" #: src/security/security_apparmor.c:293 #, fuzzy msgid "template too large" msgstr "nparmas 过大" #: src/security/security_apparmor.c:299 #, fuzzy, c-format msgid "template '%s' does not exist" msgstr "命令 '%s' 不存在" #: src/security/security_apparmor.c:331 src/security/security_selinux.c:174 msgid "security label already defined for VM" msgstr "已经为 VM 定义了安全性标签" #: src/security/security_apparmor.c:342 #, fuzzy, c-format msgid "cannot generate AppArmor profile '%s'" msgstr "无法生成配置文件 '%s'" #: src/security/security_apparmor.c:399 #, fuzzy msgid "error copying profile name" msgstr "正在解析池文件名" #: src/security/security_apparmor.c:405 #, fuzzy msgid "error calling profile_status()" msgstr "%s：调用 security_getenforce() 出错：%s" #: src/security/security_apparmor.c:428 #, fuzzy, c-format msgid "could not remove profile for '%s'" msgstr "无法为 %s 删除配置" #: src/security/security_apparmor.c:454 src/security/security_selinux.c:653 #, fuzzy, c-format msgid "" "security label driver mismatch: '%s' model configured for domain, but " "hypervisor driver is '%s'." msgstr "" "%s：安全性标签驱动程序不匹配：为域配置了 '%s' 模块，但为监控程序驱动程序配置" "的是 '%s'。" #: src/security/security_apparmor.c:464 #, fuzzy msgid "error calling aa_change_profile()" msgstr "%s：调用 security_getenforce() 出错：%s" #: src/security/security_apparmor.c:494 src/security/security_apparmor.c:535 #, fuzzy, c-format msgid "cannot update AppArmor profile '%s'" msgstr "无法 stat 文件 '%s'" #: src/security/security_apparmor.c:524 #, fuzzy, c-format msgid "'%s' does not exist" msgstr "命令 '%s' 不存在" #: src/security/security_apparmor.c:558 #, fuzzy, c-format msgid "Invalid security label '%s'" msgstr "无效安全性标签 %s" #: src/security/security_selinux.c:116 #, fuzzy, c-format msgid "cannot open SELinux virtual domain context file '%s'" msgstr "%s：无法打开 SELinux 虚拟域上下文文件 %s：%s" #: src/security/security_selinux.c:123 #, fuzzy, c-format msgid "cannot read SELinux virtual domain context file %s" msgstr "%s：无法读取 SELinux 虚拟域上下文文件 %s：%s" #: src/security/security_selinux.c:135 #, fuzzy, c-format msgid "cannot open SELinux virtual image context file %s" msgstr "%s：无法打开 SELinux 虚拟域映像上下文文件 %s：%s" #: src/security/security_selinux.c:142 #, fuzzy, c-format msgid "cannot read SELinux virtual image context file %s" msgstr "%s：无法读取 SELinux 虚拟域映像上下文文件 %s：%s" #: src/security/security_selinux.c:195 src/security/security_selinux.c:201 #, c-format msgid "cannot generate selinux context for %s" msgstr "无法为 %s 生成 selinux 上下文" #: src/security/security_selinux.c:232 src/security/security_selinux.c:284 #, fuzzy, c-format msgid "unable to get PID %d security context" msgstr "%s：无法设定安全性上下文 '\\%s'：%s。" #: src/security/security_selinux.c:291 #, fuzzy, c-format msgid "security label exceeds maximum lenth: %d" msgstr "%s：安全性标签超过最大长度：%d" #: src/security/security_selinux.c:303 #, fuzzy msgid "error calling security_getenforce()" msgstr "%s：调用 security_getenforce() 出错：%s" #: src/security/security_selinux.c:337 #, fuzzy, c-format msgid "unable to set security context '%s' on '%s'" msgstr "%s：无法在 %s 中设置安全性上下文 '\\%s'：%s。" #: src/security/security_selinux.c:363 #, c-format msgid "cannot resolve symlink %s" msgstr "无法解析系统链接 %s" #: src/security/security_selinux.c:635 #, c-format msgid "Invalid security label %s" msgstr "无效安全性标签 %s" #: src/security/security_selinux.c:663 #, fuzzy, c-format msgid "unable to set security context '%s'" msgstr "%s：无法设定安全性上下文 '\\%s'：%s。" #: src/security/virt-aa-helper.c:100 #, fuzzy, c-format msgid "%s: error: %s\n" msgstr "%s: 错误：" #: src/security/virt-aa-helper.c:112 #, fuzzy, c-format msgid "%s: warning: %s\n" msgstr "警告" #: src/security/virt-aa-helper.c:118 #, c-format msgid "" "%s:\n" "%s\n" msgstr "" #: src/storage/storage_backend.c:134 #, fuzzy, c-format msgid "could not open input path '%s'" msgstr "无法打开路径 '%s'" #: src/storage/storage_backend.c:156 #, fuzzy, c-format msgid "failed reading from file '%s'" msgstr "从文件 lseek 或者读取失败：%s" #: src/storage/storage_backend.c:172 src/storage/storage_backend.c:276 #, c-format msgid "cannot extend file '%s'" msgstr "无法扩展文件 '%s'" #: src/storage/storage_backend.c:178 #, fuzzy, c-format msgid "failed writing to file '%s'" msgstr "向 pid 文件 '%s' : %s 写入失败" #: src/storage/storage_backend.c:188 src/storage/storage_backend.c:232 #: src/storage/storage_backend.c:326 src/storage/storage_backend_fs.c:846 #: src/storage/storage_backend_logical.c:640 #, c-format msgid "cannot close file '%s'" msgstr "无法关闭文件 '%s'" #: src/storage/storage_backend.c:216 src/storage/storage_backend.c:267 #: src/storage/storage_backend_fs.c:522 src/storage/storage_backend_fs.c:763 #, c-format msgid "cannot create path '%s'" msgstr "无法创建路径 '%s'" #: src/storage/storage_backend.c:259 src/storage/storage_backend_disk.c:562 #: src/storage/storage_backend_logical.c:586 #, fuzzy msgid "storage pool does not support encrypted volumes" msgstr "存储池不支持卷创建" #: src/storage/storage_backend.c:306 src/storage/storage_backend.c:317 #, c-format msgid "cannot fill file '%s'" msgstr "无法装入文件 '%s'" #: src/storage/storage_backend.c:362 msgid "too many conflicts when generating an uuid" msgstr "" #: src/storage/storage_backend.c:392 #, fuzzy msgid "secrets already defined" msgstr "已经为 VM 定义了安全性标签" #: src/storage/storage_backend.c:512 src/storage/storage_backend.c:518 #, c-format msgid "unknown storage vol type %d" msgstr "未知存储卷类型 %d" #: src/storage/storage_backend.c:533 msgid "a different backing store can not be specified." msgstr "" #: src/storage/storage_backend.c:540 #, c-format msgid "unknown storage vol backing store type %d" msgstr "未知存储后端存储类型 %d" #: src/storage/storage_backend.c:546 #, c-format msgid "inaccessible backing store volume %s" msgstr "无法访问的后端存储卷 %s" #: src/storage/storage_backend.c:558 #, c-format msgid "qcow volume encryption unsupported with volume format %s" msgstr "" #: src/storage/storage_backend.c:566 #, fuzzy, c-format msgid "unsupported volume encryption format %d" msgstr "不支持的验证类型 %d" #: src/storage/storage_backend.c:572 msgid "too many secrets for qcow encryption" msgstr "" #: src/storage/storage_backend.c:588 msgid "unable to find kvm-img or qemu-img" msgstr "" #: src/storage/storage_backend.c:643 #, fuzzy msgid "cannot copy from volume with qcow-create" msgstr "创建 qcow 不支持写时复制（copy-on-write）映像" #: src/storage/storage_backend.c:649 #, c-format msgid "unsupported storage vol type %d" msgstr "不支持的存储卷类型 %d" #: src/storage/storage_backend.c:655 msgid "copy-on-write image not supported with qcow-create" msgstr "创建 qcow 不支持写时复制（copy-on-write）映像" #: src/storage/storage_backend.c:661 #, fuzzy msgid "encrypted volumes not supported with qcow-create" msgstr "创建 qcow 不支持写时复制（copy-on-write）映像" #: src/storage/storage_backend.c:695 #, fuzzy, c-format msgid "Unknown file create tool type '%d'." msgstr "未知文件系统类型 '%s'" #: src/storage/storage_backend.c:744 #, fuzzy msgid "creation of non-raw file images is not supported without qemu-img." msgstr "没有 qemu-img 则不支持生成非原始映像" #: src/storage/storage_backend.c:782 src/storage/storage_backend_fs.c:67 #: src/storage/storage_backend_mpath.c:52 #: src/storage/storage_backend_scsi.c:147 #, c-format msgid "cannot open volume '%s'" msgstr "无法打开卷 '%s'" #: src/storage/storage_backend.c:845 #, c-format msgid "cannot stat file '%s'" msgstr "无法 stat 文件 '%s'" #: src/storage/storage_backend.c:878 #, c-format msgid "cannot seek to end of file '%s'" msgstr "无法查找文件 '%s' 的结尾" #: src/storage/storage_backend.c:899 #, c-format msgid "cannot get file context of '%s'" msgstr "无法获得 '%s' 的文件上下文" #: src/storage/storage_backend.c:970 src/storage/storage_backend_scsi.c:165 #, c-format msgid "cannot seek to beginning of file '%s'" msgstr "无法查找文件 '%s' 的开始" #: src/storage/storage_backend.c:977 src/storage/storage_backend_scsi.c:172 #, c-format msgid "cannot read beginning of file '%s'" msgstr "无法读取文件 '%s' 的开始" #: src/storage/storage_backend.c:1043 #, c-format msgid "cannot read dir '%s'" msgstr "无法读取目录 '%s'" #: src/storage/storage_backend.c:1130 #, c-format msgid "Failed to compile regex %s" msgstr "编译表达式 %s 失败" #: src/storage/storage_backend.c:1162 src/storage/storage_backend.c:1296 msgid "cannot read fd" msgstr "无法读取 fd" #: src/storage/storage_backend.c:1233 src/storage/storage_backend.c:1351 #, c-format msgid "failed to wait for command '%s'" msgstr "等待命令失败 '%s' 失败" #: src/storage/storage_backend.c:1242 src/storage/storage_backend.c:1364 msgid "command did not exit cleanly" msgstr "无法彻底退出命令" #: src/storage/storage_backend.c:1330 #, c-format msgid "read error on pipe to '%s'" msgstr "pipe 到 '%s' 时出现读取错误" #: src/storage/storage_backend.c:1358 #, c-format msgid "non-zero exit status from command %d" msgstr "命令 %d 的非零退出状态" #: src/storage/storage_backend.c:1385 src/storage/storage_backend.c:1397 #, c-format msgid "%s not implemented on Win32" msgstr "在 Win32 中没有使用 %s" #: src/storage/storage_backend_disk.c:111 msgid "cannot parse device start location" msgstr "无法解析设备起始位置" #: src/storage/storage_backend_disk.c:118 msgid "cannot parse device end location" msgstr "无法解析设备终止位置" #: src/storage/storage_backend_disk.c:400 #, fuzzy msgid "Invalid partition type" msgstr "无效安全性类型 %s" #: src/storage/storage_backend_disk.c:408 #, fuzzy msgid "extended partition already exists" msgstr "目标 %s 已存在" #: src/storage/storage_backend_disk.c:432 msgid "no extended partition found and no primary partition available" msgstr "" #: src/storage/storage_backend_disk.c:517 msgid "no large enough free extent" msgstr "没有足够的可用扩展" #: src/storage/storage_backend_disk.c:631 #, c-format msgid "Couldn't read volume target path '%s'" msgstr "无法读取卷目标路径 '%s'" #: src/storage/storage_backend_disk.c:642 #, c-format msgid "Volume path '%s' did not start with parent pool source device name." msgstr "卷路径 '%s' 没有以上一级池源设备名称开始。" #: src/storage/storage_backend_disk.c:651 #, c-format msgid "cannot parse partition number from target '%s'" msgstr "无法从目标 '%s' 中解析分区号码" #: src/storage/storage_backend_fs.c:153 #, c-format msgid "invalid netfs path (no /): %s" msgstr "无效 netfs 路径（没有 /）：%s" #: src/storage/storage_backend_fs.c:159 #, c-format msgid "invalid netfs path (ends in /): %s" msgstr "无效 netfs 路径（以 / 结尾）：%s" #: src/storage/storage_backend_fs.c:216 msgid "bad spec" msgstr "bad spec" #: src/storage/storage_backend_fs.c:229 msgid "missing in spec" msgstr "在 spec 中缺少 " #: src/storage/storage_backend_fs.c:276 #, c-format msgid "cannot read mount list '%s'" msgstr "无法读取挂载列表 '%s'" #: src/storage/storage_backend_fs.c:368 src/storage/storage_backend_fs.c:444 #: src/storage/storage_backend_iscsi.c:276 msgid "missing source host" msgstr "源主机缺失" #: src/storage/storage_backend_fs.c:373 msgid "missing source path" msgstr "缺少源路径" #: src/storage/storage_backend_fs.c:379 src/storage/storage_backend_fs.c:455 #: src/storage/storage_backend_iscsi.c:283 msgid "missing source device" msgstr "缺少源设备" #: src/storage/storage_backend_fs.c:449 msgid "missing source dir" msgstr "缺少源目录" #: src/storage/storage_backend_fs.c:546 #, c-format msgid "cannot open path '%s'" msgstr "无法打开路径 '%s'" #: src/storage/storage_backend_fs.c:642 #, c-format msgid "cannot statvfs path '%s'" msgstr "无法 statvfs 路径 '%s'" #: src/storage/storage_backend_fs.c:709 #, c-format msgid "cannot unlink path '%s'" msgstr "无法取消链接路径 '%s'" #: src/storage/storage_backend_fs.c:757 #, fuzzy msgid "cannot copy from volume to a directory volume" msgstr "无法更改到根目录：%s" #: src/storage/storage_backend_fs.c:783 #, fuzzy msgid "" "storage pool does not support building encrypted volumes from other volumes" msgstr "存储池不支持卷创建" #: src/storage/storage_backend_fs.c:803 msgid "creation of non-raw images is not supported without qemu-img" msgstr "没有 qemu-img 则不支持生成非原始映像" #: src/storage/storage_backend_fs.c:813 #: src/storage/storage_backend_logical.c:617 #, c-format msgid "cannot read path '%s'" msgstr "无法读取路径 '%s'" #: src/storage/storage_backend_fs.c:822 #: src/storage/storage_backend_logical.c:626 #, c-format msgid "cannot set file owner '%s'" msgstr "无法设定文件拥有者 '%s'" #: src/storage/storage_backend_fs.c:830 #: src/storage/storage_backend_logical.c:633 #, c-format msgid "cannot set file mode '%s'" msgstr "无法设定文件模式 '%s'" #: src/storage/storage_backend_fs.c:889 #, c-format msgid "cannot unlink file '%s'" msgstr "无法取消链接文件 '%s'" #: src/storage/storage_backend_iscsi.c:65 #, c-format msgid "host lookup failed %s" msgstr "查找主机失败 %s" #: src/storage/storage_backend_iscsi.c:72 #, c-format msgid "no IP address for target %s" msgstr "没有适合目标 %s 的 IP 地址" #: src/storage/storage_backend_iscsi.c:81 #, c-format msgid "cannot format ip addr for %s" msgstr "无法为 %s 格式化 ip 地址" #: src/storage/storage_backend_iscsi.c:149 msgid "cannot find session" msgstr "无法找到会话" #: src/storage/storage_backend_iscsi.c:188 #, c-format msgid "Failed to get host number for iSCSI session with path '%s'" msgstr "为路径为 '%s' 的 iSCSI 会话获取主机名失败" #: src/storage/storage_backend_iscsi.c:196 #, c-format msgid "Failed to find LUs on host %u" msgstr "在直接 %u 中查找 LUs 失败" #: src/storage/storage_backend_logical.c:153 msgid "malformed volume extent offset value" msgstr "畸形的卷扩展补偿值" #: src/storage/storage_backend_logical.c:158 msgid "malformed volume extent length value" msgstr "畸形的卷扩展长度值" #: src/storage/storage_backend_logical.c:163 msgid "malformed volume extent size value" msgstr "畸形的卷扩展大小值" #: src/storage/storage_backend_logical.c:221 msgid "lvs command failed" msgstr "lvs 命令失败" #: src/storage/storage_backend_logical.c:227 #, c-format msgid "lvs command failed with exitstatus %d" msgstr "带退出状态 %d 的 lvs 命令失败" #: src/storage/storage_backend_logical.c:357 msgid "failed to get source from sourceList" msgstr "从 sourceList 获得源失败" #: src/storage/storage_backend_logical.c:412 #, c-format msgid "cannot open device '%s'" msgstr "无法打开设备 '%s'" #: src/storage/storage_backend_logical.c:418 #, c-format msgid "cannot clear device header of '%s'" msgstr "无法清除设备标题 '%s'" #: src/storage/storage_backend_logical.c:425 #, c-format msgid "cannot close device '%s'" msgstr "无法关闭设备 '%s'" #: src/storage/storage_backend_logical.c:550 #, c-format msgid "cannot remove PV device '%s'" msgstr "无法删除 PV 设备 '%s'" #: src/storage/storage_backend_logical.c:649 #, c-format msgid "cannot find newly created volume '%s'" msgstr "无法找到新生成的卷 '%s'" #: src/storage/storage_backend_mpath.c:65 #, fuzzy, c-format msgid "Failed to update volume target info for '%s'" msgstr "为 '%s' 更新卷失败" #: src/storage/storage_backend_mpath.c:76 #, fuzzy, c-format msgid "Failed to update volume target format for '%s'" msgstr "为 '%s' 更新卷失败" #: src/storage/storage_backend_mpath.c:123 #: src/storage/storage_backend_scsi.c:260 #, c-format msgid "Failed to update volume for '%s'" msgstr "为 '%s' 更新卷失败" #: src/storage/storage_backend_mpath.c:331 #, fuzzy, c-format msgid "in %s" msgstr "bind: %s" #: src/storage/storage_backend_scsi.c:65 #, c-format msgid "Could not find typefile '%s'" msgstr "无法找到类型文件 '%s'" #: src/storage/storage_backend_scsi.c:77 #, c-format msgid "Could not read typefile '%s'" msgstr "无法读取类型文件 '%s'" #: src/storage/storage_backend_scsi.c:89 #, c-format msgid "Device type '%s' is not an integer" msgstr "设备类型 '%s' 不是一个整数" #: src/storage/storage_backend_scsi.c:96 #, c-format msgid "Device type is %d" msgstr "设备类型为 %d" #: src/storage/storage_backend_scsi.c:228 #, c-format msgid "Trying to create volume for '%s'" msgstr "试图为 '%s' 创建卷" #: src/storage/storage_backend_scsi.c:247 #, c-format msgid "No stable path found for '%s' in '%s'" msgstr "在 '%s' 中没有找到 '%s' 的稳定路径" #: src/storage/storage_backend_scsi.c:311 #, c-format msgid "Looking for block device in '%s'" msgstr "正在 '%s' 中查找块设备" #: src/storage/storage_backend_scsi.c:316 #: src/storage/storage_backend_scsi.c:392 #, c-format msgid "Failed to opendir sysfs path '%s'" msgstr "opendir sysfs 路径 '%s' 失败" #: src/storage/storage_backend_scsi.c:329 #: src/storage/storage_backend_scsi.c:363 #, c-format msgid "Block device is '%s'" msgstr "块设备为 '%s'" #: src/storage/storage_backend_scsi.c:356 #, c-format msgid "Failed to parse block name %s" msgstr "解析块名称 %s 失败" #: src/storage/storage_backend_scsi.c:436 #, c-format msgid "Processing LU %u:%u:%u:%u" msgstr "正在处理 LU %u:%u:%u:%u" #: src/storage/storage_backend_scsi.c:441 #, c-format msgid "Failed to determine if %u:%u:%u:%u is a Direct-Access LUN" msgstr "确定 %u:%u:%u:%u 是否为直接访问 LUN 失败" #: src/storage/storage_backend_scsi.c:457 #, c-format msgid "%u:%u:%u:%u is a Direct-Access LUN" msgstr "%u:%u:%u:%u 是一个直接访问 LUN" #: src/storage/storage_backend_scsi.c:467 #, c-format msgid "Failed to create new storage volume for %u:%u:%u:%u" msgstr "为 %u:%u:%u:%u 创建新存储卷失败" #: src/storage/storage_backend_scsi.c:473 #, c-format msgid "Created new storage volume for %u:%u:%u:%u successfully" msgstr "为 %u:%u:%u:%u 创建新存储卷成功" #: src/storage/storage_backend_scsi.c:495 #, c-format msgid "Discovering LUs on host %u" msgstr "在主机 %u 中发现 LU" #: src/storage/storage_backend_scsi.c:508 #: src/storage/storage_backend_scsi.c:551 #, c-format msgid "Failed to opendir path '%s'" msgstr "打开目录路径 '%s' 失败" #: src/storage/storage_backend_scsi.c:521 #, c-format msgid "Found LU '%s'" msgstr "找到 LU '%s'" #: src/storage/storage_backend_scsi.c:543 #, c-format msgid "Finding host number from '%s'" msgstr "正在从 '%s' 中查找主机号码" #: src/storage/storage_backend_scsi.c:560 #, c-format msgid "Failed to parse target '%s'" msgstr "解析目标 '%s' 失败" #: src/storage/storage_backend_scsi.c:581 #, fuzzy, c-format msgid "Triggering rescan of host %d" msgstr "在主机 %u 中发现 LU" #: src/storage/storage_backend_scsi.c:589 #, fuzzy, c-format msgid "Scan trigger path is '%s'" msgstr "无法读取路径 '%s'" #: src/storage/storage_backend_scsi.c:595 #, c-format msgid "Could not open '%s' to trigger host scan" msgstr "" #: src/storage/storage_backend_scsi.c:606 #, c-format msgid "Write to '%s' to trigger host scan failed" msgstr "" #: src/storage/storage_backend_scsi.c:615 #, c-format msgid "Rescan of host %d complete" msgstr "" #: src/storage/storage_backend_scsi.c:630 #, c-format msgid "Failed to get host number from '%s'" msgstr "从 '%s' 中获得主机号码失败" #: src/storage/storage_backend_scsi.c:636 #, c-format msgid "Scanning host%u" msgstr "正在扫描主机 %u" #: src/storage/storage_driver.c:273 src/storage/storage_driver.c:930 #: src/storage/storage_driver.c:959 msgid "no pool with matching uuid" msgstr "没有带匹配 uuid 的池" #: src/storage/storage_driver.c:298 #, fuzzy, c-format msgid "no pool with matching name '%s'" msgstr "没有带匹配名称的池" #: src/storage/storage_driver.c:455 #, fuzzy, c-format msgid "pool type '%s' does not support source discovery" msgstr "池不支持卷删除" #: src/storage/storage_driver.c:487 src/test/test_driver.c:3240 msgid "storage pool already exists" msgstr "存储池已存在" #: src/storage/storage_driver.c:572 src/storage/storage_driver.c:626 #: src/storage/storage_driver.c:671 src/storage/storage_driver.c:708 #: src/storage/storage_driver.c:764 src/storage/storage_driver.c:813 #: src/storage/storage_driver.c:869 src/storage/storage_driver.c:905 #: src/storage/storage_driver.c:1021 src/storage/storage_driver.c:1054 #: src/storage/storage_driver.c:1099 src/storage/storage_driver.c:1225 #: src/storage/storage_driver.c:1346 src/storage/storage_driver.c:1499 #: src/storage/storage_driver.c:1578 src/storage/storage_driver.c:1631 #: src/storage/storage_driver.c:1678 msgid "no storage pool with matching uuid" msgstr "没有带匹配 uuid 的存储池" #: src/storage/storage_driver.c:578 msgid "pool is still active" msgstr "池仍是激活的" #: src/storage/storage_driver.c:584 src/storage/storage_driver.c:723 #: src/storage/storage_driver.c:779 src/storage/storage_driver.c:828 #, c-format msgid "pool '%s' has asynchronous jobs running." msgstr "" #: src/storage/storage_driver.c:635 msgid "pool already active" msgstr "池已经激活" #: src/storage/storage_driver.c:680 msgid "storage pool is already active" msgstr "存储池已经激活" #: src/storage/storage_driver.c:717 src/storage/storage_driver.c:822 #: src/storage/storage_driver.c:1027 src/storage/storage_driver.c:1060 #: src/storage/storage_driver.c:1105 src/storage/storage_driver.c:1231 #: src/storage/storage_driver.c:1359 src/storage/storage_driver.c:1365 #: src/storage/storage_driver.c:1505 src/storage/storage_driver.c:1584 #: src/storage/storage_driver.c:1637 src/storage/storage_driver.c:1684 msgid "storage pool is not active" msgstr "存储池未激活" #: src/storage/storage_driver.c:773 msgid "storage pool is still active" msgstr "存储池仍然激活" #: src/storage/storage_driver.c:786 msgid "pool does not support volume delete" msgstr "池不支持卷删除" #: src/storage/storage_driver.c:965 src/test/test_driver.c:3571 msgid "pool has no config file" msgstr "池没有配置文件" #: src/storage/storage_driver.c:1113 src/storage/storage_driver.c:1375 #: src/storage/storage_driver.c:1516 src/storage/storage_driver.c:1592 #: src/storage/storage_driver.c:1645 src/storage/storage_driver.c:1692 #: src/test/test_driver.c:3693 src/test/test_driver.c:3894 #: src/test/test_driver.c:3970 src/test/test_driver.c:4048 #: src/test/test_driver.c:4093 src/test/test_driver.c:4133 #, c-format msgid "no storage vol with matching name '%s'" msgstr "没有带匹配名称 '%s' 的存储卷" #: src/storage/storage_driver.c:1153 msgid "no storage vol with matching key" msgstr "没有带匹配密钥的存储卷" #: src/storage/storage_driver.c:1200 msgid "no storage vol with matching path" msgstr "没有带匹配路径的存储卷" #: src/storage/storage_driver.c:1244 src/test/test_driver.c:3806 #: src/test/test_driver.c:3887 msgid "storage vol already exists" msgstr "存储卷已经存在" #: src/storage/storage_driver.c:1256 msgid "storage pool does not support volume creation" msgstr "存储池不支持卷创建" #: src/storage/storage_driver.c:1352 #, fuzzy, c-format msgid "no storage pool with matching name '%s'" msgstr "没有带匹配名称 '%s' 的存储卷" #: src/storage/storage_driver.c:1386 #, fuzzy, c-format msgid "storage volume name '%s' already in use." msgstr "桥接名称 '%s' 已在使用。" #: src/storage/storage_driver.c:1402 #, fuzzy msgid "storage pool does not support volume creation from an existing volume" msgstr "存储池不支持卷创建" #: src/storage/storage_driver.c:1408 src/storage/storage_driver.c:1523 #, fuzzy, c-format msgid "volume '%s' is still being allocated." msgstr "域 '%s' 仍在运行" #: src/storage/storage_driver.c:1530 msgid "storage pool does not support vol deletion" msgstr "存储池不支持卷删除" #: src/test/test_driver.c:280 #, c-format msgid "Exceeded max iface limit %d" msgstr "" #: src/test/test_driver.c:483 #, fuzzy, c-format msgid "node vol list for pool '%s'" msgstr "'%s' 没有设备容量" #: src/test/test_driver.c:494 #, fuzzy msgid "resolving volume filename" msgstr "正在解析池文件名" #: src/test/test_driver.c:577 #, c-format msgid "loading host definition file '%s'" msgstr "正在载入主机定义文件 '%s'" #: src/test/test_driver.c:586 #, fuzzy, c-format msgid "Invalid XML in file '%s'" msgstr "无法找到类型文件 '%s'" #: src/test/test_driver.c:595 msgid "Root element is not 'node'" msgstr "" #: src/test/test_driver.c:602 msgid "creating xpath context" msgstr "正在创建xpath上下文" #: src/test/test_driver.c:610 #, c-format msgid "Path %s too big for destination" msgstr "" #: src/test/test_driver.c:620 msgid "node cpu numa nodes" msgstr "节点 cpu 的 numa 节点" #: src/test/test_driver.c:628 msgid "node cpu sockets" msgstr "节点 cpu socket" #: src/test/test_driver.c:636 msgid "node cpu cores" msgstr "节点 cpu 核心" #: src/test/test_driver.c:644 msgid "node cpu threads" msgstr "节点 cpu 线程" #: src/test/test_driver.c:655 msgid "node active cpu" msgstr "节点活跃 cpu" #: src/test/test_driver.c:662 msgid "node cpu mhz" msgstr "节点 cpu mhz" #: src/test/test_driver.c:670 src/xen/xm_internal.c:1075 #, c-format msgid "Model %s too big for destination" msgstr "" #: src/test/test_driver.c:681 msgid "node memory" msgstr "节点内存" #: src/test/test_driver.c:687 msgid "node domain list" msgstr "节点域列表" #: src/test/test_driver.c:698 msgid "resolving domain filename" msgstr "解析域文件名" #: src/test/test_driver.c:727 msgid "node network list" msgstr "节点网络列表" #: src/test/test_driver.c:737 msgid "resolving network filename" msgstr "解析网络文件名" #: src/test/test_driver.c:763 #, fuzzy msgid "node interface list" msgstr "节点网络列表" #: src/test/test_driver.c:773 #, fuzzy msgid "resolving interface filename" msgstr "解析网络文件名" #: src/test/test_driver.c:799 msgid "node pool list" msgstr "节点池列表" #: src/test/test_driver.c:811 msgid "resolving pool filename" msgstr "正在解析池文件名" #: src/test/test_driver.c:850 #, fuzzy msgid "node device list" msgstr "节点域列表" #: src/test/test_driver.c:864 #, fuzzy msgid "resolving device filename" msgstr "正在解析池文件名" #: src/test/test_driver.c:932 msgid "testOpen: supply a path or use test:///default" msgstr "testOpen：提供一个路径或者默认使用 test:///" #: src/test/test_driver.c:1002 src/uml/uml_driver.c:1139 #: src/xen/xen_driver.c:492 msgid "cannot lookup hostname" msgstr "无法查找主机名" #: src/test/test_driver.c:1248 #, c-format msgid "domain '%s' not paused" msgstr "域 '%s' 未中断" #: src/test/test_driver.c:1290 src/test/test_driver.c:1331 #, c-format msgid "domain '%s' not running" msgstr "域 '%s' 没有在运行" #: src/test/test_driver.c:1491 #, c-format msgid "saving domain '%s' failed to allocate space for metadata" msgstr "保存域 '%s' 失败，无法为元数据分配空间" #: src/test/test_driver.c:1498 #, c-format msgid "saving domain '%s' to '%s': open failed" msgstr "将域 '%s' 保存到 '%s'：打开失败" #: src/test/test_driver.c:1505 src/test/test_driver.c:1511 #: src/test/test_driver.c:1517 src/test/test_driver.c:1524 #, c-format msgid "saving domain '%s' to '%s': write failed" msgstr "将域 '%s' 保存到 '%s'：写入失败" #: src/test/test_driver.c:1575 #, c-format msgid "cannot read domain image '%s'" msgstr "无法读取域映像 '%s'" #: src/test/test_driver.c:1581 #, c-format msgid "incomplete save header in '%s'" msgstr "没有完成在 '%s' 中保存标题" #: src/test/test_driver.c:1587 msgid "mismatched header magic" msgstr "错误匹配的 header magic" #: src/test/test_driver.c:1592 #, c-format msgid "failed to read metadata length in '%s'" msgstr "在 '%s' 中读取元数据长度失败" #: src/test/test_driver.c:1598 msgid "length of metadata out of range" msgstr "元数据长度超出范围" #: src/test/test_driver.c:1607 #, c-format msgid "incomplete metdata in '%s'" msgstr "'%s' 中不完整的元数据" #: src/test/test_driver.c:1665 #, c-format msgid "domain '%s' coredump: failed to open %s" msgstr "域 '%s' coredump：打开 %s 失败" #: src/test/test_driver.c:1671 #, c-format msgid "domain '%s' coredump: failed to write header to %s" msgstr "域 '%s' coredump：在 %s 写入标题失败" #: src/test/test_driver.c:1677 #, c-format msgid "domain '%s' coredump: write failed: %s" msgstr "域 '%s' coredump：写入失败：%s " #: src/test/test_driver.c:1946 msgid "Range exceeds available cells" msgstr "范围超出可用单元" #: src/test/test_driver.c:1980 #, c-format msgid "Domain '%s' is already running" msgstr "域 '%s' 已经运行" #: src/test/test_driver.c:2017 #, c-format msgid "Domain '%s' is still running" msgstr "域 '%s' 仍在运行" #: src/test/test_driver.c:2510 #, c-format msgid "Network '%s' is still running" msgstr "网络 '%s' 仍在运行" #: src/test/test_driver.c:2543 #, c-format msgid "Network '%s' is already running" msgstr "网络 '%s' 已经运行" #: src/test/test_driver.c:3199 src/test/test_driver.c:3319 #: src/test/test_driver.c:3352 src/test/test_driver.c:3420 #, c-format msgid "storage pool '%s' is already active" msgstr "存储池 '%s' 已经激活" #: src/test/test_driver.c:3381 src/test/test_driver.c:3452 #: src/test/test_driver.c:3604 src/test/test_driver.c:3639 #: src/test/test_driver.c:3685 src/test/test_driver.c:3796 #: src/test/test_driver.c:3877 src/test/test_driver.c:3977 #: src/test/test_driver.c:4055 src/test/test_driver.c:4100 #: src/test/test_driver.c:4140 #, c-format msgid "storage pool '%s' is not active" msgstr "存储池 '%s' 未激活" #: src/test/test_driver.c:3736 #, c-format msgid "no storage vol with matching key '%s'" msgstr "没有带匹配密钥 '%s' 的存储卷" #: src/test/test_driver.c:3770 #, c-format msgid "no storage vol with matching path '%s'" msgstr "没有带匹配路径 '%s' 的存储卷" #: src/test/test_driver.c:3814 src/test/test_driver.c:3903 #, c-format msgid "Not enough free space in pool for volume '%s'" msgstr "在池中没有用于卷 '%s' 的足够可用空间" #: src/uml/uml_conf.c:184 msgid "IP address not supported for ethernet inteface" msgstr "" #: src/uml/uml_conf.c:189 msgid "script execution not supported for ethernet inteface" msgstr "" #: src/uml/uml_conf.c:196 #, fuzzy msgid "TCP server networking type not supported" msgstr "不支持网络类型 %d" #: src/uml/uml_conf.c:201 #, fuzzy msgid "TCP client networking type not supported" msgstr "不支持网络类型 %d" #: src/uml/uml_conf.c:216 #, c-format msgid "Network '%s' not found" msgstr "未找到网络 '%s'" #: src/uml/uml_conf.c:246 #, fuzzy msgid "internal networking type not supported" msgstr "不支持网络类型 %d" #: src/uml/uml_conf.c:313 msgid "only TCP listen is supported for chr device" msgstr "只支持字符设备的 TCP 侦听" #: src/uml/uml_conf.c:333 #, c-format msgid "unsupported chr device type %d" msgstr "不支持字符设备类型 %d" #: src/uml/uml_driver.c:96 src/util/util.c:374 src/util/util.c:403 msgid "Failed to set close-on-exec file descriptor flag" msgstr "设定执行时关闭（close-on-exec）描述符标记失败" #: src/uml/uml_driver.c:136 #, fuzzy, c-format msgid "Failed to autostart VM '%s': %s" msgstr "自动启动 VM '%s' 失败：%s\n" #: src/uml/uml_driver.c:368 msgid "cannot initialize inotify" msgstr "无法初始化 inotify" #: src/uml/uml_driver.c:374 #, c-format msgid "Failed to create monitor directory %s: %s" msgstr "创建监视器目录 %s 失败：%s" #: src/uml/uml_driver.c:407 #, fuzzy msgid "umlStartup: out of memory" msgstr "umlStartup：内存溢出\n" #: src/uml/uml_driver.c:555 #, c-format msgid "failed to read pid: %s" msgstr "读取 pid 失败：%s" #: src/uml/uml_driver.c:578 #, c-format msgid "Unix path %s too long for destination" msgstr "" #: src/uml/uml_driver.c:608 msgid "cannot open socket" msgstr "无法打开套接字" #: src/uml/uml_driver.c:617 msgid "cannot bind socket" msgstr "无法绑定套接字" #: src/uml/uml_driver.c:672 #, c-format msgid "cannot send too long command %s (%d bytes)" msgstr "无法发送过长的命令 %s（%d 字节）" #: src/uml/uml_driver.c:678 #, c-format msgid "Command %s too long for destination" msgstr "" #: src/uml/uml_driver.c:685 #, c-format msgid "cannot send command %s" msgstr "无法发送命令 %s " #: src/uml/uml_driver.c:695 #, c-format msgid "cannot read reply %s" msgstr "无法读取回复 %s" #: src/uml/uml_driver.c:777 msgid "no kernel specified" msgstr "没有指定内核" #: src/uml/uml_driver.c:786 #, c-format msgid "Cannot find UML kernel %s" msgstr "无法找到 UML 内核 %s" #: src/uml/uml_driver.c:831 src/uml/uml_driver.c:834 #, fuzzy, c-format msgid "Unable to write envv to logfile: %s" msgstr "无法将 envv 写入日志文件 %s\n" #: src/uml/uml_driver.c:841 src/uml/uml_driver.c:844 src/uml/uml_driver.c:849 #, fuzzy, c-format msgid "Unable to write argv to logfile: %s" msgstr "无法将 argv 写入日志文件 %s\n" #: src/uml/uml_driver.c:895 #, fuzzy, c-format msgid "Got unexpected pid %d != %d" msgstr "获得意外 pid %d != %d\n" #: src/uml/uml_driver.c:945 #, c-format msgid "unexpected UML URI path '%s', try uml:///system" msgstr "" #: src/uml/uml_driver.c:952 #, c-format msgid "unexpected UML URI path '%s', try uml:///session" msgstr "" #: src/uml/uml_driver.c:961 #, fuzzy msgid "uml state driver is not active" msgstr "存储池未激活" #: src/uml/uml_driver.c:1119 #, c-format msgid "cannot parse version %s" msgstr "无法解析版本 %s" #: src/uml/uml_driver.c:1191 #, c-format msgid "domain '%s' is already defined" msgstr "域名 '%s' 已经定义" #: src/uml/uml_driver.c:1201 #, c-format msgid "domain with uuid '%s' is already defined" msgstr "uuid 为 '%s' 的域已经定义" #: src/uml/uml_driver.c:1249 msgid "shutdown operation failed" msgstr "关闭操作失败" #: src/uml/uml_driver.c:1777 #, c-format msgid "cannot read %s" msgstr "无法读取 %s" #: src/util/bridge.c:397 msgid "Not enabling IFF_VNET_HDR; TUNGETFEATURES ioctl() not implemented" msgstr "没有启用 IFF_VNET_HDR；未部署 TUNGETFEATURES ioctl()" #: src/util/bridge.c:403 msgid "" "Not enabling IFF_VNET_HDR; TUNGETFEATURES ioctl() reports no IFF_VNET_HDR" msgstr "没有启用 IFF_VNET_HDR；TUNGETFEATURES ioctl() 没有报告 IFF_VNET_HDR" #: src/util/bridge.c:412 msgid "Not enabling IFF_VNET_HDR; TUNGETIFF ioctl() not implemented" msgstr "没有启用 IFF_VNET_HDR；没有部署 TUNGETIFF ioctl() " #: src/util/bridge.c:417 msgid "Enabling IFF_VNET_HDR" msgstr "启用 IFF_VNET_HDR" #: src/util/bridge.c:422 msgid "Not enabling IFF_VNET_HDR; disabled at build time" msgstr "没有启用 IFF_VNET_HDR；在构建时禁用" #: src/util/conf.c:354 msgid "unterminated number" msgstr "未终止的数" #: src/util/conf.c:387 src/util/conf.c:403 src/util/conf.c:414 msgid "unterminated string" msgstr "未终止的字符串" #: src/util/conf.c:441 src/util/conf.c:504 msgid "expecting a value" msgstr "需要一个值" #: src/util/conf.c:452 msgid "lists not allowed in VMX format" msgstr "VMX格式下不允许使用列表" #: src/util/conf.c:466 msgid "expecting a separator in list" msgstr "在列表中需要一个分隔符" #: src/util/conf.c:489 msgid "list is not closed with ]" msgstr "列表没有使用 ] 结尾" #: src/util/conf.c:496 msgid "numbers not allowed in VMX format" msgstr "VMX 格式中不允许有数字" #: src/util/conf.c:539 msgid "expecting a name" msgstr "需要一个名称" #: src/util/conf.c:603 msgid "expecting a separator" msgstr "需要一个分隔符" #: src/util/conf.c:634 msgid "expecting an assignment" msgstr "需要一个参数" #: src/util/conf.c:923 msgid "failed to open file" msgstr "打开文件失败" #: src/util/conf.c:934 msgid "failed to save content" msgstr "保存内容失败" #: src/util/iptables.c:103 #, c-format msgid "Failed to run '%s %s': %s" msgstr "运行 '%s %s' 失败： %s" #: src/util/iptables.c:151 msgid "Failed to read " msgstr "读取失败" #: src/util/iptables.c:180 msgid "Failed to write to " msgstr "写入失败" #: src/util/iptables.c:246 #, c-format msgid "Failed to create directory %s : %s" msgstr "创建目录 %s 失败：%s" #: src/util/iptables.c:252 #, c-format msgid "Failed to saves iptables rules to %s : %s" msgstr "将路由表规则保存到 %s 失败：%s" #: src/util/iptables.c:553 #, c-format msgid "Failed to remove iptables rule '%s' from chain '%s' in table '%s': %s" msgstr "无法从表 '%s' 中的链 '%s' 中删除路由表规则 '%s'：%s" #: src/util/iptables.c:563 #, c-format msgid "Failed to add iptables rule '%s' to chain '%s' in table '%s': %s" msgstr "无法向表 '%s' 中的链 '%s' 添加路由表规则 '%s'：%s" #: src/util/logging.c:332 msgid "Ignoring invalid log level setting." msgstr "" #: src/util/logging.c:782 msgid "Ignoring invalid log output setting." msgstr "" #: src/util/logging.c:838 msgid "Ignoring invalid log filter setting." msgstr "" #: src/util/logging.c:956 msgid "Ignoring invalid log level setting" msgstr "" #: src/util/pci.c:148 #, c-format msgid "Failed to open config space file '%s': %s" msgstr "打开 config 空间文件 '%s' 失败 : %s" #: src/util/pci.c:168 #, c-format msgid "Failed to read from '%s' : %s" msgstr "从 '%s' 读取失败：%s" #: src/util/pci.c:208 #, c-format msgid "Failed to write to '%s' : %s" msgstr "向 pid 文件 '%s' 写入失败： %s" #: src/util/pci.c:471 #, c-format msgid "Active %s devices on bus with %s, not doing bus reset" msgstr "" #: src/util/pci.c:480 #, fuzzy, c-format msgid "Failed to find parent device for %s" msgstr "为域 %s 分离设备失败" #: src/util/pci.c:493 src/util/pci.c:539 #, fuzzy, c-format msgid "Failed to save PCI config space for %s" msgstr "打开 config 空间文件 '%s' 失败" #: src/util/pci.c:513 src/util/pci.c:559 #, fuzzy, c-format msgid "Failed to restore PCI config space for %s" msgstr "打开 config 空间文件 '%s' 失败" #: src/util/pci.c:572 #, c-format msgid "Failed to open config space file '%s'" msgstr "打开 config 空间文件 '%s' 失败" #: src/util/pci.c:594 #, fuzzy, c-format msgid "Not resetting active device %s" msgstr "无法获取显示设备" #: src/util/pci.c:621 #, fuzzy, c-format msgid "Unable to reset PCI device %s: %s" msgstr "重置设备 %s 失败" #: src/util/pci.c:623 msgid "no FLR, PM reset or bus reset available" msgstr "" #: src/util/pci.c:677 #, c-format msgid "failed to load pci-stub or pciback drivers: %s" msgstr "载入 pci-stub 或者 pciback 驱动程序失败： %s" #: src/util/pci.c:706 #, c-format msgid "Failed to add PCI device ID '%s' to %s" msgstr "将 PCI 设备 ID '%s' 添加到 %s 失败" #: src/util/pci.c:719 #, c-format msgid "Failed to unbind PCI device '%s'" msgstr "取消绑定 PCI 设备 '%s' 失败" #: src/util/pci.c:732 #, c-format msgid "Failed to add slot for PCI device '%s' to %s" msgstr "为 PCI 设备 '%s' 在 %s 添加插槽失败" #: src/util/pci.c:740 src/util/pci.c:787 #, c-format msgid "Failed to bind PCI device '%s' to %s" msgstr "将 PCI 设备 ID '%s' 绑定到 %s 失败" #: src/util/pci.c:752 #, c-format msgid "Failed to remove PCI ID '%s' from %s" msgstr "从 %s 中删除 PCI ID '%s' 失败" #: src/util/pci.c:766 src/util/pci.c:827 msgid "cannot find any PCI stub module" msgstr "无法找到任何 PCI stub 模块" #: src/util/pci.c:797 #, c-format msgid "Failed to remove slot for PCI device '%s' to %s" msgstr "为 PCI 设备 '%s' 从 %s 删除插槽失败" #: src/util/pci.c:812 #, c-format msgid "Failed to trigger a re-probe for PCI device '%s'" msgstr "为 PCI 设备 '%s' 激发重新探测失败" #: src/util/pci.c:890 #, c-format msgid "Failed to read product/vendor ID for %s" msgstr "读取 %s 产品/经销商 ID 失败" #: src/util/pci.c:969 #, fuzzy, c-format msgid "Device %s is already in use" msgstr "桥接名称 '%s' 已在使用。" #: src/util/storage_file.c:289 #, c-format msgid "cannot read header '%s'" msgstr "无法读取标题 '%s'" #: src/util/storage_file.c:415 #, fuzzy, c-format msgid "cannot open file '%s'" msgstr "无法关闭文件 '%s'" #: src/util/util.c:346 msgid "cannot block signals" msgstr "无法阻断信号" #: src/util/util.c:361 msgid "cannot create pipe" msgstr "无法创建管道" #: src/util/util.c:368 src/util/util.c:397 msgid "Failed to set non-blocking file descriptor flag" msgstr "设定非块文件描述符标记失败" #: src/util/util.c:390 msgid "Failed to create pipe" msgstr "创建管道失败" #: src/util/util.c:417 src/util/util.c:532 msgid "cannot fork child process" msgstr "无法分开子进程" #: src/util/util.c:436 src/util/util.c:473 msgid "cannot unblock signals" msgstr "无法取消信号阻断" #: src/util/util.c:489 msgid "failed to setup stdin file handle" msgstr "设置 stdin 文件处理失败" #: src/util/util.c:495 msgid "failed to setup stdout file handle" msgstr "设置 stdout 文件处理失败" #: src/util/util.c:501 msgid "failed to setup stderr file handle" msgstr "设置 stderr 文件处理失败" #: src/util/util.c:519 msgid "cannot become session leader" msgstr "无法成为会话领导者" #: src/util/util.c:525 #, c-format msgid "cannot change to root directory: %s" msgstr "无法更改到根目录：%s" #: src/util/util.c:542 #, fuzzy, c-format msgid "could not write pidfile %s for %d" msgstr "向 pid 文件 '%s' : %s 写入失败" #: src/util/util.c:566 #, c-format msgid "cannot execute binary %s" msgstr "无法执行二进制文件 %s" #: src/util/util.c:690 #, c-format msgid "Intermediate daemon process exited with status %d." msgstr "" #: src/util/util.c:735 msgid "Unknown poll response." msgstr "未知 poll 响应。" #: src/util/util.c:766 msgid "poll error" msgstr "poll 错误" #: src/util/util.c:842 #, c-format msgid "'%s' exited with non-zero status %d and signal %d: %s" msgstr "退出 '%s' 时没有非零状态 %d 和信号 %d：%s" #: src/util/util.c:967 #, fuzzy, c-format msgid "Failed to open file '%s'" msgstr "打开目录 '%s' 失败" #: src/util/util.c:974 #, fuzzy, c-format msgid "Failed to read file '%s'" msgstr "创建 '%s' 失败" #: src/util/util.c:1952 #, c-format msgid "Failed to find user record for uid '%d'" msgstr "查找 uid '%d' 的用户记录失败" #: src/util/util.c:2006 #, fuzzy, c-format msgid "Failed to find user record for name '%s'" msgstr "查找 uid '%d' 的用户记录失败" #: src/util/util.c:2043 #, fuzzy, c-format msgid "Failed to find group record for name '%s'" msgstr "查找 uid '%d' 的用户记录失败" #: src/util/uuid.c:104 #, c-format msgid "Falling back to pseudorandom UUID, failed to generate random bytes: %s" msgstr "返回伪随机 UUID，生成随机字节失败：%s" #: src/util/virterror.c:220 msgid "Unknown failure" msgstr "未知失败" #: src/util/virterror.c:534 msgid "warning" msgstr "警告" #: src/util/virterror.c:537 msgid "error" msgstr "错误" #: src/util/virterror.c:671 msgid "No error message provided" msgstr "没有错误讯息提供" #: src/util/virterror.c:734 #, c-format msgid "internal error %s" msgstr "内部错误 %s" #: src/util/virterror.c:736 msgid "internal error" msgstr "内部错误" #: src/util/virterror.c:739 msgid "out of memory" msgstr "内存溢出" #: src/util/virterror.c:743 msgid "this function is not supported by the hypervisor" msgstr "此功能不被管理程序支持" #: src/util/virterror.c:745 #, c-format msgid "this function is not supported by the hypervisor: %s" msgstr "此功能不被管理程序支持 %s" #: src/util/virterror.c:749 #, fuzzy msgid "no hypervisor driver available" msgstr "没有可用安全性驱动程序" #: src/util/virterror.c:751 #, fuzzy, c-format msgid "no hypervisor driver available for %s" msgstr "没有可用安全性驱动程序" #: src/util/virterror.c:755 msgid "invalid connection pointer in" msgstr "无效的连接指向" #: src/util/virterror.c:757 #, c-format msgid "invalid connection pointer in %s" msgstr "无效的连接指向 %s" #: src/util/virterror.c:761 msgid "invalid domain pointer in" msgstr "无效的域名指向" #: src/util/virterror.c:763 #, c-format msgid "invalid domain pointer in %s" msgstr "无效的域名指向 %s" #: src/util/virterror.c:767 msgid "invalid argument in" msgstr "无效的参数" #: src/util/virterror.c:769 #, c-format msgid "invalid argument in %s" msgstr "无效的参数 %s" #: src/util/virterror.c:773 #, c-format msgid "operation failed: %s" msgstr "操作失败: %s" #: src/util/virterror.c:775 msgid "operation failed" msgstr "操作失败" #: src/util/virterror.c:779 #, c-format msgid "GET operation failed: %s" msgstr "GET操作失败: %s" #: src/util/virterror.c:781 msgid "GET operation failed" msgstr "GET操作失败" #: src/util/virterror.c:785 #, c-format msgid "POST operation failed: %s" msgstr "POST操作失败: %s" #: src/util/virterror.c:787 msgid "POST operation failed" msgstr "POST操作失败" #: src/util/virterror.c:790 #, c-format msgid "got unknown HTTP error code %d" msgstr "得到未知的HTTP错误代码 %d" #: src/util/virterror.c:794 #, c-format msgid "unknown host %s" msgstr "未知的主机 %s" #: src/util/virterror.c:796 msgid "unknown host" msgstr "未知的主机" #: src/util/virterror.c:800 #, c-format msgid "failed to serialize S-Expr: %s" msgstr "序列化S-Expr失败: %s" #: src/util/virterror.c:802 msgid "failed to serialize S-Expr" msgstr "序列化S-Expr失败" #: src/util/virterror.c:806 msgid "could not use Xen hypervisor entry" msgstr "不能使用Xen管理程序登录" #: src/util/virterror.c:808 #, c-format msgid "could not use Xen hypervisor entry %s" msgstr "不能使用Xen管理程序登录 %s" #: src/util/virterror.c:812 msgid "could not connect to Xen Store" msgstr "不能连接Xen存储器" #: src/util/virterror.c:814 #, c-format msgid "could not connect to Xen Store %s" msgstr "不能连接Xen存储器 %s" #: src/util/virterror.c:817 #, c-format msgid "failed Xen syscall %s" msgstr "Xen系统调用失败 %s" #: src/util/virterror.c:821 msgid "unknown OS type" msgstr "未知操作系统类型" #: src/util/virterror.c:823 #, c-format msgid "unknown OS type %s" msgstr "未知操作系统类型 %s" #: src/util/virterror.c:826 msgid "missing kernel information" msgstr "丢失内核信息" #: src/util/virterror.c:830 msgid "missing root device information" msgstr "丢失root设备信息" #: src/util/virterror.c:832 #, c-format msgid "missing root device information in %s" msgstr "丢失root信息 %s" #: src/util/virterror.c:836 msgid "missing source information for device" msgstr "丢失设备的源代码信息" #: src/util/virterror.c:838 #, c-format msgid "missing source information for device %s" msgstr "丢失设备的源代码信息 %s" #: src/util/virterror.c:842 msgid "missing target information for device" msgstr "丢失设备的目标信息" #: src/util/virterror.c:844 #, c-format msgid "missing target information for device %s" msgstr "丢失设备的目标信息 %s" #: src/util/virterror.c:848 msgid "missing domain name information" msgstr "丢失域名信息" #: src/util/virterror.c:850 #, c-format msgid "missing domain name information in %s" msgstr "丢失域名信息 %s" #: src/util/virterror.c:854 msgid "missing operating system information" msgstr "丢失操作系统信息" #: src/util/virterror.c:856 #, c-format msgid "missing operating system information for %s" msgstr "丢失操作系统信息 %s" #: src/util/virterror.c:860 msgid "missing devices information" msgstr "丢失设备信息" #: src/util/virterror.c:862 #, c-format msgid "missing devices information for %s" msgstr "丢失设备信息 %s" #: src/util/virterror.c:866 msgid "too many drivers registered" msgstr "注册了太多的设备" #: src/util/virterror.c:868 #, c-format msgid "too many drivers registered in %s" msgstr "注册了太多的设备 %s" #: src/util/virterror.c:872 msgid "library call failed, possibly not supported" msgstr "库调用失败，可能不支持" #: src/util/virterror.c:874 #, c-format msgid "library call %s failed, possibly not supported" msgstr "库调用 %s 失败，可能不支持" #: src/util/virterror.c:878 msgid "XML description not well formed or invalid" msgstr "XML描述不是良好的格式或者无效" #: src/util/virterror.c:880 #, c-format msgid "XML description for %s is not well formed or invalid" msgstr "XML描述 %s 不是良好的格式或者无效" #: src/util/virterror.c:884 msgid "this domain exists already" msgstr "这个域名已经存在" #: src/util/virterror.c:886 #, c-format msgid "domain %s exists already" msgstr "域名 %s 已经存在" #: src/util/virterror.c:890 msgid "operation forbidden for read only access" msgstr "只读权限禁止此操作" #: src/util/virterror.c:892 #, c-format msgid "operation %s forbidden for read only access" msgstr "只读权限禁止操作 %s " #: src/util/virterror.c:896 msgid "failed to open configuration file for reading" msgstr "打开并读取配置文件失败" #: src/util/virterror.c:898 #, c-format msgid "failed to open %s for reading" msgstr "打开并读取 %s 文件失败" #: src/util/virterror.c:902 msgid "failed to read configuration file" msgstr "读取配置文件失败" #: src/util/virterror.c:904 #, c-format msgid "failed to read configuration file %s" msgstr "读取配置文件 %s 失败" #: src/util/virterror.c:908 msgid "failed to parse configuration file" msgstr "解析配置文件失败" #: src/util/virterror.c:910 #, c-format msgid "failed to parse configuration file %s" msgstr "解析配置文件%s失败" #: src/util/virterror.c:914 msgid "configuration file syntax error" msgstr "配置文件语法错误" #: src/util/virterror.c:916 #, c-format msgid "configuration file syntax error: %s" msgstr "配置文件语法错误: %s" #: src/util/virterror.c:920 msgid "failed to write configuration file" msgstr "写入配置文件失败" #: src/util/virterror.c:922 #, c-format msgid "failed to write configuration file: %s" msgstr "写入配置文件失败: %s" #: src/util/virterror.c:926 msgid "parser error" msgstr "语法错误" #: src/util/virterror.c:932 msgid "invalid network pointer in" msgstr "无效的网络指针" #: src/util/virterror.c:934 #, c-format msgid "invalid network pointer in %s" msgstr "无效的网络指针 %s" #: src/util/virterror.c:938 msgid "this network exists already" msgstr "这个网络已存在" #: src/util/virterror.c:940 #, c-format msgid "network %s exists already" msgstr "网络%s 已经存在" #: src/util/virterror.c:944 msgid "system call error" msgstr "系统调用错误" #: src/util/virterror.c:950 msgid "RPC error" msgstr "RPC错误" #: src/util/virterror.c:956 msgid "GNUTLS call error" msgstr "GNUTLS调用错误" #: src/util/virterror.c:962 msgid "Failed to find the network" msgstr "查找网络失败" #: src/util/virterror.c:964 #, c-format msgid "Failed to find the network: %s" msgstr "查找网络失败: %s" #: src/util/virterror.c:968 msgid "Domain not found" msgstr "未找到域" #: src/util/virterror.c:970 #, c-format msgid "Domain not found: %s" msgstr "未找到域: %s" #: src/util/virterror.c:974 msgid "Network not found" msgstr "未找到网络" #: src/util/virterror.c:976 #, c-format msgid "Network not found: %s" msgstr "未找到网络: %s" #: src/util/virterror.c:980 msgid "invalid MAC address" msgstr "无效的 MAC 地址" #: src/util/virterror.c:982 #, c-format msgid "invalid MAC address: %s" msgstr "无效的 MAC 地址: %s" #: src/util/virterror.c:986 msgid "authentication failed" msgstr "验证失败" #: src/util/virterror.c:988 #, c-format msgid "authentication failed: %s" msgstr "验证失败: %s" #: src/util/virterror.c:992 msgid "Storage pool not found" msgstr "未找到存储池" #: src/util/virterror.c:994 #, c-format msgid "Storage pool not found: %s" msgstr "未找到存储池: %s" #: src/util/virterror.c:998 msgid "Storage volume not found" msgstr "未找到存储卷" #: src/util/virterror.c:1000 #, c-format msgid "Storage volume not found: %s" msgstr "未找到存储卷: %s" #: src/util/virterror.c:1004 msgid "invalid storage pool pointer in" msgstr "无效的存储池指针" #: src/util/virterror.c:1006 #, c-format msgid "invalid storage pool pointer in %s" msgstr "%s 中无效的存储池指针" #: src/util/virterror.c:1010 msgid "invalid storage volume pointer in" msgstr "无效的存储卷指针" #: src/util/virterror.c:1012 #, c-format msgid "invalid storage volume pointer in %s" msgstr "%s 中无效的存储卷指针" #: src/util/virterror.c:1016 msgid "Failed to find a storage driver" msgstr "查找存储驱动程序失败" #: src/util/virterror.c:1018 #, c-format msgid "Failed to find a storage driver: %s" msgstr "查找存储驱动程序失败： %s" #: src/util/virterror.c:1022 msgid "Failed to find a node driver" msgstr "查找节点程序失败" #: src/util/virterror.c:1024 #, c-format msgid "Failed to find a node driver: %s" msgstr "查找节点程序失败：%s" #: src/util/virterror.c:1028 msgid "invalid node device pointer" msgstr "无效的节点设备" #: src/util/virterror.c:1030 #, c-format msgid "invalid node device pointer in %s" msgstr "%s 中的无效节点设备指针" #: src/util/virterror.c:1034 msgid "Node device not found" msgstr "未找到节点设备" #: src/util/virterror.c:1036 #, c-format msgid "Node device not found: %s" msgstr "未找到节点设备：%s" #: src/util/virterror.c:1040 msgid "Security model not found" msgstr "未找到安全性模式" #: src/util/virterror.c:1042 #, c-format msgid "Security model not found: %s" msgstr "未找到安全性模式：%s" #: src/util/virterror.c:1046 #, fuzzy msgid "Requested operation is not valid" msgstr "挂起操作失败" #: src/util/virterror.c:1048 #, fuzzy, c-format msgid "Requested operation is not valid: %s" msgstr "操作失败: %s" #: src/util/virterror.c:1052 #, fuzzy msgid "Failed to find the interface" msgstr "查找网络失败" #: src/util/virterror.c:1054 #, fuzzy, c-format msgid "Failed to find the interface: %s" msgstr "查找网络失败: %s" #: src/util/virterror.c:1058 #, fuzzy msgid "Interface not found" msgstr "未找到节点设备（_d）" #: src/util/virterror.c:1060 #, fuzzy, c-format msgid "Interface not found: %s" msgstr "未找到存储池: %s" #: src/util/virterror.c:1064 #, fuzzy msgid "invalid interface pointer in" msgstr "无效的网络指针" #: src/util/virterror.c:1066 #, fuzzy, c-format msgid "invalid interface pointer in %s" msgstr "无效的网络指针 %s" #: src/util/virterror.c:1070 msgid "multiple matching interfaces found" msgstr "" #: src/util/virterror.c:1072 #, c-format msgid "multiple matching interfaces found: %s" msgstr "" #: src/util/virterror.c:1076 #, fuzzy msgid "Failed to find a secret storage driver" msgstr "查找存储驱动程序失败" #: src/util/virterror.c:1078 #, fuzzy, c-format msgid "Failed to find a secret storage driver: %s" msgstr "查找存储驱动程序失败： %s" #: src/util/virterror.c:1082 #, fuzzy msgid "Invalid secret" msgstr "无效安全性类型 %s" #: src/util/virterror.c:1084 #, fuzzy, c-format msgid "Invalid secret: %s" msgstr "无效安全性标签 %s" #: src/util/virterror.c:1087 #, fuzzy msgid "Secret not found" msgstr "未找到安全性模式" #: src/util/virterror.c:1089 #, fuzzy, c-format msgid "Secret not found: %s" msgstr "未找到安全性模式：%s" #: src/util/virterror.c:1167 msgid "internal error: buffer too small" msgstr "内部错误：缓冲太小" #: src/util/xml.c:60 msgid "Invalid parameter to virXPathString()" msgstr "virXPathString() 的无效参数" #: src/util/xml.c:101 #, c-format msgid "'%s' value longer than %Zd bytes in virXPathStringLimit()" msgstr "'%s' 值超过 virXPathStringLimit() %Zd 字节" #: src/util/xml.c:131 msgid "Invalid parameter to virXPathNumber()" msgstr "virXPathNumber() 的无效参数" #: src/util/xml.c:161 msgid "Invalid parameter to virXPathLong()" msgstr "virXPathLong() 的无效参数" #: src/util/xml.c:248 src/util/xml.c:346 msgid "Invalid parameter to virXPathULong()" msgstr "virXPathLong() 的无效参数" #: src/util/xml.c:404 msgid "Invalid parameter to virXPathBoolean()" msgstr "virXPathBoolean() 的无效参数" #: src/util/xml.c:442 msgid "Invalid parameter to virXPathNode()" msgstr "virXPathNode() 的无效参数" #: src/util/xml.c:483 msgid "Invalid parameter to virXPathNodeSet()" msgstr "virXPathNodeSet() 的无效参数" #: src/vbox/vbox_driver.c:127 src/vbox/vbox_tmpl.c:522 msgid "no VirtualBox driver path specified (try vbox:///session)" msgstr "" #: src/vbox/vbox_driver.c:134 src/vbox/vbox_tmpl.c:529 #, c-format msgid "unknown driver path '%s' specified (try vbox:///session)" msgstr "" #: src/vbox/vbox_driver.c:141 src/vbox/vbox_tmpl.c:536 #, c-format msgid "unknown driver path '%s' specified (try vbox:///system)" msgstr "" #: src/vbox/vbox_driver.c:147 #, fuzzy msgid "unable to initialize VirtualBox driver API" msgstr "无法初始化证书 %s " #: src/xen/proxy_internal.c:243 #, c-format msgid "Failed to close socket %d\n" msgstr "关闭 socket %d 失败\n" #: src/xen/proxy_internal.c:300 #, c-format msgid "Failed to write to socket %d\n" msgstr "写 socket %d 失败\n" #: src/xen/proxy_internal.c:382 msgid "failed to write proxy request" msgstr "写入代理服务器请求失败" #: src/xen/proxy_internal.c:393 src/xen/proxy_internal.c:416 msgid "failed to read proxy reply" msgstr "读取代理服务器回应失败" #: src/xen/proxy_internal.c:398 src/xen/proxy_internal.c:421 #: src/xen/proxy_internal.c:439 #, c-format msgid "Communication error with proxy: got %d bytes of %d\n" msgstr "与代理服务器通讯错误：获得了 %d 字节（共有 %d 字节）\n" #: src/xen/proxy_internal.c:405 #, c-format msgid "Communication error with proxy: expected %d bytes got %d\n" msgstr "与代理服务器通讯错误：需要 %d 字节，而获得了 %d 字节\n" #: src/xen/proxy_internal.c:429 #, c-format msgid "Communication error with proxy: got %d bytes packet\n" msgstr "与代理服务器通讯错误：获得了 %d 字节的数据包\n" #: src/xen/proxy_internal.c:451 msgid "Communication error with proxy: malformed packet\n" msgstr "与代理服务器通讯错误：数据包格式不正确\n" #: src/xen/proxy_internal.c:455 #, c-format msgid "got asynchronous packet number %d\n" msgstr "获得了异步数据包号 %d\n" #: src/xen/xend_internal.c:127 msgid "failed to create a socket" msgstr "生成套接字失败" #: src/xen/xend_internal.c:150 msgid "failed to connect to xend" msgstr "连接到 xend 失败" #: src/xen/xend_internal.c:197 src/xen/xend_internal.c:200 msgid "failed to read from Xen Daemon" msgstr "从 Xen 守护进程读失败" #: src/xen/xend_internal.c:388 #, c-format msgid "%d status from xen daemon: %s:%s" msgstr "来自 xen 守护进程的 %d 状态：%s:%s" #: src/xen/xend_internal.c:439 src/xen/xend_internal.c:442 #: src/xen/xend_internal.c:450 #, c-format msgid "xend_post: error from xen daemon: %s" msgstr "xend_post：来自 xen 守护进程的错误：%s" #: src/xen/xend_internal.c:846 #, c-format msgid "unable to connect to '%s:%s'" msgstr "无法连接到 '%s:%s'" #: src/xen/xend_internal.c:964 msgid "failed to urlencode the create S-Expr" msgstr "urlencode 创建的 S-Expr 失败" #: src/xen/xend_internal.c:1005 msgid "domain information incomplete, missing domid" msgstr "域信息不完全，缺少 domid" #: src/xen/xend_internal.c:1011 msgid "domain information incorrect domid not numeric" msgstr "域信息不正确，domid 不是数字值" #: src/xen/xend_internal.c:1016 src/xen/xend_internal.c:1063 msgid "domain information incomplete, missing uuid" msgstr "域信息不完全，缺少 uuid" #: src/xen/xend_internal.c:1055 src/xen/xend_internal.c:2348 #: src/xen/xend_internal.c:2355 msgid "domain information incomplete, missing name" msgstr "域信息不完全，缺少名称" #: src/xen/xend_internal.c:1144 msgid "domain information incomplete, missing HVM loader" msgstr "域信息不完全，缺少 HVM 装载程序" #: src/xen/xend_internal.c:1198 msgid "domain information incomplete, missing kernel & bootloader" msgstr "域信息不完全,缺少内核和启动器" #: src/xen/xend_internal.c:1262 msgid "Unknown char device type" msgstr "未知字符设备类型" #: src/xen/xend_internal.c:1296 src/xen/xend_internal.c:1336 #: src/xen/xend_internal.c:1352 src/xen/xend_internal.c:1489 #: src/xen/xend_internal.c:1517 src/xen/xend_internal.c:1533 msgid "malformed char device string" msgstr "畸形字符设备字符串" #: src/xen/xend_internal.c:1462 #, c-format msgid "unknown chr device type '%s'" msgstr "未知字符设备类型 '%s'" #: src/xen/xend_internal.c:1624 msgid "domain information incomplete, vbd has no dev" msgstr "域信息不完全，vbd 没有 dev" #: src/xen/xend_internal.c:1635 msgid "domain information incomplete, vbd has no src" msgstr "域信息不完全，vbd 没有 src" #: src/xen/xend_internal.c:1644 msgid "cannot parse vbd filename, missing driver name" msgstr "缺少驱动名，无法解释 vbd 文件名" #: src/xen/xend_internal.c:1653 src/xen/xm_internal.c:914 #, c-format msgid "Driver name %s too big for destination" msgstr "" #: src/xen/xend_internal.c:1664 msgid "cannot parse vbd filename, missing driver type" msgstr "缺少驱动类型，无法解释 vbd 文件名" #: src/xen/xend_internal.c:1673 src/xen/xm_internal.c:935 #, c-format msgid "Driver type %s too big for destination" msgstr "" #: src/xen/xend_internal.c:1825 #, c-format msgid "malformed mac address '%s'" msgstr "畸形 mac 地址 '%s'" #: src/xen/xend_internal.c:1906 #, c-format msgid "Sound model %s too big for destination" msgstr "" #: src/xen/xend_internal.c:2106 #, c-format msgid "unknown graphics type '%s'" msgstr "未知图形类型 '%s'" #: src/xen/xend_internal.c:2233 msgid "missing PCI domain" msgstr "缺少 PCI 域" #: src/xen/xend_internal.c:2238 msgid "missing PCI bus" msgstr "缺少 PCI 总线" #: src/xen/xend_internal.c:2243 msgid "missing PCI slot" msgstr "缺少 PCI 插槽" #: src/xen/xend_internal.c:2248 msgid "missing PCI func" msgstr "缺少 PCI 功能" #: src/xen/xend_internal.c:2254 #, c-format msgid "cannot parse PCI domain '%s'" msgstr "无法解析 PCI 域 '%s'" #: src/xen/xend_internal.c:2259 #, c-format msgid "cannot parse PCI bus '%s'" msgstr "无法解析 PCI 总线 '%s'" #: src/xen/xend_internal.c:2264 #, c-format msgid "cannot parse PCI slot '%s'" msgstr "无法解析 PCI 插槽 '%s'" #: src/xen/xend_internal.c:2269 #, c-format msgid "cannot parse PCI func '%s'" msgstr "无法解析 PCI 功能 '%s'" #: src/xen/xend_internal.c:2335 msgid "domain information incomplete, missing id" msgstr "域信息不完全，缺少 id" #: src/xen/xend_internal.c:2403 #, c-format msgid "invalid CPU mask %s" msgstr "无效 CPU 掩码 %s" #: src/xen/xend_internal.c:2414 src/xen/xend_internal.c:2424 #: src/xen/xend_internal.c:2434 #, c-format msgid "unknown lifecycle type %s" msgstr "未知周期类型 %s" #: src/xen/xend_internal.c:2816 msgid "topology syntax error" msgstr "拓扑结构句法错误" #: src/xen/xend_internal.c:2880 msgid "failed to parse Xend domain information" msgstr "解释 Xend 域信息失败" #: src/xen/xend_internal.c:3004 src/xen/xend_internal.c:3031 #: src/xen/xend_internal.c:3059 src/xen/xend_internal.c:3088 #: src/xen/xend_internal.c:3119 src/xen/xend_internal.c:3194 #: src/xen/xend_internal.c:3231 #, c-format msgid "Domain %s isn't running." msgstr "域 %s 没有在运行。" #: src/xen/xend_internal.c:3389 msgid "xenDaemonDomainFetch failed to find this domain" msgstr "xenDaemonDomainFetch 查找这个域失败" #: src/xen/xend_internal.c:4137 src/xen/xend_internal.c:4144 msgid "unsupported device type" msgstr "不支持的设备类型" #: src/xen/xend_internal.c:4249 msgid "xenDaemonGetAutostart failed to find this domain" msgstr "xenDaemonGetAutostart 无法找到这个域" #: src/xen/xend_internal.c:4290 msgid "xenDaemonSetAutostart failed to find this domain" msgstr "xenDaemonGetAutostart 无法找到这个域" #: src/xen/xend_internal.c:4298 msgid "unexpected value from on_xend_start" msgstr "on_xend_start 中的意外值" #: src/xen/xend_internal.c:4309 msgid "no memory" msgstr "没有内存" #: src/xen/xend_internal.c:4315 msgid "sexpr2string failed" msgstr "sexpr2string 失败" #: src/xen/xend_internal.c:4320 msgid "Failed to redefine sexpr" msgstr "重新定义 sexpr 失败" #: src/xen/xend_internal.c:4325 msgid "on_xend_start not present in sexpr" msgstr "sexpr 中没有 on_xend_start" #: src/xen/xend_internal.c:4356 #, c-format msgid "unable to resolve name %s" msgstr "无法解析名称 %s" #: src/xen/xend_internal.c:4392 msgid "" "xenDaemonDomainMigrate: Xen does not support renaming domains during " "migration" msgstr "xenDaemonDomainMigrate：Xen 不支持在迁移时重新命名域" #: src/xen/xend_internal.c:4402 msgid "" "xenDaemonDomainMigrate: Xen does not support bandwidth limits during " "migration" msgstr "xenDaemonDomainMigrate：Xen 不支持在迁移时的带宽限制" #: src/xen/xend_internal.c:4416 msgid "xenDaemonDomainMigrate: unsupported flag" msgstr "xenDaemonDomainMigrate：不支持的标记" #: src/xen/xend_internal.c:4429 msgid "xenDaemonDomainMigrate: invalid URI" msgstr "xenDaemonDomainMigrate：无效 URI" #: src/xen/xend_internal.c:4434 msgid "xenDaemonDomainMigrate: only xenmigr:// migrations are supported by Xen" msgstr "xenDaemonDomainMigrate：Xen 只支持 xenmigr:// 迁移" #: src/xen/xend_internal.c:4441 msgid "xenDaemonDomainMigrate: a hostname must be specified in the URI" msgstr "xenDaemonDomainMigrate：在 URI 中必须指定主机名" #: src/xen/xend_internal.c:4461 msgid "xenDaemonDomainMigrate: invalid port number" msgstr "xenDaemonDomainMigrate：无效端口号" #: src/xen/xend_internal.c:4517 msgid "failed to parse domain description" msgstr "解释域描述失败" #: src/xen/xend_internal.c:4523 msgid "failed to build sexpr" msgstr "构建 sexpr 失败" #: src/xen/xend_internal.c:4533 #, c-format msgid "Failed to create inactive domain %s\n" msgstr "创建不活动域 %s 失败\n" #: src/xen/xend_internal.c:4701 src/xen/xend_internal.c:4777 #: src/xen/xend_internal.c:4874 msgid "unsupported in xendConfigVersion < 4" msgstr "xendConfigVersion < 4 不支持" #: src/xen/xend_internal.c:4713 msgid "node information incomplete, missing scheduler name" msgstr "节点信息不完整，缺少调度程序名称" #: src/xen/xend_internal.c:4719 src/xen/xend_internal.c:4726 msgid "strdup failed" msgstr "strdup 失败" #: src/xen/xend_internal.c:4731 src/xen/xend_internal.c:4832 #: src/xen/xend_internal.c:4944 msgid "Unknown scheduler" msgstr "未知调度程序" #: src/xen/xend_internal.c:4790 src/xen/xend_internal.c:4887 msgid "Failed to get a scheduler name" msgstr "获得调度程序名失败" #: src/xen/xend_internal.c:4803 src/xen/xend_internal.c:4923 msgid "domain information incomplete, missing cpu_weight" msgstr "域信息不完整，缺少 cpu_weight" #: src/xen/xend_internal.c:4808 src/xen/xend_internal.c:4932 msgid "domain information incomplete, missing cpu_cap" msgstr "域信息不完整，缺少 cpu_cap" #: src/xen/xend_internal.c:4814 #, c-format msgid "Weight %s too big for destination" msgstr "" #: src/xen/xend_internal.c:4823 #, c-format msgid "Cap %s too big for destination" msgstr "" #: src/xen/xend_internal.c:4990 msgid "domainBlockPeek is not supported for dom0" msgstr "不支持 dom0 中的 domainBlockPeek" #: src/xen/xend_internal.c:5011 #, c-format msgid "%s: invalid path" msgstr "%s：无效路径" #: src/xen/xend_internal.c:5019 #, c-format msgid "failed to open for reading: %s" msgstr "打开并读取失败：%s" #: src/xen/xend_internal.c:5031 #, c-format msgid "failed to lseek or read from file: %s" msgstr "从文件 lseek 或者读取失败：%s" #: src/xen/xend_internal.c:5113 src/xen/xend_internal.c:5159 #, c-format msgid "unexpected graphics type %d" msgstr "意外的图形类型 %d" #: src/xen/xend_internal.c:5202 msgid "unexpected chr device type" msgstr "意外的字符设备类型" #: src/xen/xend_internal.c:5283 #, c-format msgid "Cannot directly attach floppy %s" msgstr "无法直接附加软盘 %s" #: src/xen/xend_internal.c:5295 #, c-format msgid "Cannot directly attach CDROM %s" msgstr "无法直接附加光驱 %s" #: src/xen/xend_internal.c:5395 src/xen/xm_internal.c:2071 #, c-format msgid "unsupported network type %d" msgstr "不支持的网络类型 %d" #: src/xen/xend_internal.c:5436 src/xen/xm_internal.c:2059 #, c-format msgid "network %s is not active" msgstr "网络 %s 不活跃" #: src/xen/xend_internal.c:5495 src/xen/xend_internal.c:5543 msgid "managed PCI devices not supported with XenD" msgstr "XenD 不支持管理的 PCI 设备" #: src/xen/xend_internal.c:5653 src/xen/xend_internal.c:5660 #: src/xen/xend_internal.c:5667 #, c-format msgid "unexpected lifecycle value %d" msgstr "意外的周期值 %d" #: src/xen/xend_internal.c:5688 msgid "no HVM domain loader" msgstr "无 HVM 域装载程序" #: src/xen/xend_internal.c:5928 msgid "hotplug of device type not supported" msgstr "不支持热查报设备类型" #: src/xen/xen_driver.c:257 #, c-format msgid "unexpected Xen URI path '%s', try xen:///" msgstr "" #: src/xen/xen_driver.c:275 #, c-format msgid "unexpected Xen URI path '%s', try ///var/lib/xen/xend-socket" msgstr "" #: src/xen/xen_driver.c:292 msgid "cannot initialise mutex" msgstr "无法初始化 mutex" #: src/xen/xen_hypervisor.c:1328 #, c-format msgid "Credit scheduler weight parameter (%d) is out of range (1-65535)" msgstr "信用调度程序加权参数 (%d) 超出范围 （1-65535）" #: src/xen/xen_hypervisor.c:1337 #, c-format msgid "Credit scheduler cap parameter (%d) is out of range (0-65535)" msgstr "信用调度程序上限参数 （%d）超出范围 （0-65535）" #: src/xen/xen_hypervisor.c:2585 src/xen/xen_hypervisor.c:2596 #, c-format msgid "cannot read file %s" msgstr "无法读取文件 %s" #: src/xen/xen_inotify.c:132 src/xen/xen_inotify.c:207 #, c-format msgid "parsing uuid %s" msgstr "正在解析 uuid %s" #: src/xen/xen_inotify.c:149 #, c-format msgid "finding dom for %s" msgstr "正在查找 %s 的 dom" #: src/xen/xen_inotify.c:158 msgid "finding dom on config list" msgstr "正在 config 列表中查找 dom" #: src/xen/xen_inotify.c:243 msgid "Error looking up domain" msgstr "正在查找域" #: src/xen/xen_inotify.c:250 src/xen/xen_inotify.c:343 #: src/xen/xen_inotify.c:350 msgid "Error adding file to config cache" msgstr "在 config 缓存中添加文件时出错" #: src/xen/xen_inotify.c:296 msgid "conn, or private data is NULL" msgstr "conn 或者专用数据为 NULL" #: src/xen/xen_inotify.c:339 src/xen/xen_inotify.c:362 msgid "looking up dom" msgstr "查找 dom" #: src/xen/xen_inotify.c:401 msgid "failed to allocate configInfoList" msgstr "分配 configInfoList 失败" #: src/xen/xen_inotify.c:408 #, c-format msgid "cannot open directory: %s" msgstr "无法打开目录：%s" #: src/xen/xen_inotify.c:426 msgid "Error adding file to config list" msgstr "在 config 列表中添加文件时出错" #: src/xen/xen_inotify.c:436 msgid "initializing inotify" msgstr "初始化 inotify" #: src/xen/xen_inotify.c:447 #, c-format msgid "adding watch on %s" msgstr "在 %s 中添加 watch" #: src/xen/xm_internal.c:161 src/xen/xm_internal.c:192 #: src/xen/xm_internal.c:197 src/xen/xm_internal.c:220 #, c-format msgid "config value %s was malformed" msgstr "config 值 %s 被破坏了" #: src/xen/xm_internal.c:242 src/xen/xm_internal.c:255 #, c-format msgid "config value %s was missing" msgstr "缺少 config 值 %s " #: src/xen/xm_internal.c:248 #, c-format msgid "config value %s was not a string" msgstr "config 值 %s 不是字符串" #: src/xen/xm_internal.c:405 #, c-format msgid "cannot stat: %s" msgstr "无法 stat：%s" #: src/xen/xm_internal.c:463 msgid "xenXMConfigCacheRefresh: virHashAddEntry" msgstr "xenXMConfigCacheRefresh: virHashAddEntry" #: src/xen/xm_internal.c:502 msgid "cannot get time of day" msgstr "正在获得日期" #: src/xen/xm_internal.c:515 #, c-format msgid "cannot read directory %s" msgstr "无法读取目录 %s" #: src/xen/xm_internal.c:800 #, c-format msgid "unexpected value %s for on_poweroff" msgstr "on_poweroff 的意外值 %s" #: src/xen/xm_internal.c:808 #, c-format msgid "unexpected value %s for on_reboot" msgstr "on_reboot 中的意外值 %s" #: src/xen/xm_internal.c:816 #, c-format msgid "unexpected value %s for on_crash" msgstr "on_crash 中的意外值 %s" #: src/xen/xm_internal.c:879 #, c-format msgid "Source file %s too big for destination" msgstr "" #: src/xen/xm_internal.c:898 #, fuzzy, c-format msgid "Dest file %s too big for destination" msgstr "获得节点信息失败" #: src/xen/xm_internal.c:1051 #, c-format msgid "MAC address %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1059 #, c-format msgid "Bridge %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1067 #, c-format msgid "Script %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1082 #, c-format msgid "Vifname %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1090 #, c-format msgid "IP %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1193 #, fuzzy, c-format msgid "Domain %s too big for destination" msgstr "域 %s 被关闭\n" #: src/xen/xm_internal.c:1203 #, c-format msgid "Bus %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1213 #, c-format msgid "Slot %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1223 #, fuzzy, c-format msgid "Function %s too big for destination" msgstr "连接目的地主机的 URI" #: src/xen/xm_internal.c:1339 #, c-format msgid "VFB %s too big for destination" msgstr "" #: src/xen/xm_internal.c:1698 msgid "read only connection" msgstr "只读连接" #: src/xen/xm_internal.c:1703 msgid "not inactive domain" msgstr "不活跃的域" #: src/xen/xm_internal.c:1711 msgid "virHashLookup" msgstr "virHashLookup" #: src/xen/xm_internal.c:1716 msgid "can't retrieve config file for domain" msgstr "无法为域搜索配置文件" #: src/xen/xm_internal.c:2320 src/xen/xm_internal.c:2329 #: src/xen/xm_internal.c:2338 #, c-format msgid "unexpected lifecycle action %d" msgstr "意外的周期动作 %d" #: src/xen/xm_internal.c:2617 msgid "can't retrieve config filename for domain to overwrite" msgstr "无法为域搜索用来覆盖的配置文件文件名" #: src/xen/xm_internal.c:2623 msgid "can't retrieve config entry for domain to overwrite" msgstr "无法为域搜索用来覆盖的配置文件条目" #: src/xen/xm_internal.c:2634 src/xen/xm_internal.c:2641 msgid "failed to remove old domain from config map" msgstr "从配置映像中删除原来的域失败" #: src/xen/xm_internal.c:2650 msgid "config file name is too long" msgstr "配置文件名称过长" #: src/xen/xm_internal.c:2668 msgid "unable to get current time" msgstr "无法获得当前时间" #: src/xen/xm_internal.c:2677 src/xen/xm_internal.c:2684 msgid "unable to store config file handle" msgstr "无法保存配置文件软件" #: src/xen/xm_internal.c:2902 src/xen/xm_internal.c:3005 msgid "unknown device" msgstr "未知设备" #: src/xen/xm_internal.c:3063 #, c-format msgid "cannot check link %s points to config %s" msgstr "无法检查 config %s 的链接 %s" #: src/xen/xm_internal.c:3092 #, c-format msgid "failed to create link %s to %s" msgstr "创建 %s 到 %s 的链接失败" #: src/xen/xm_internal.c:3100 #, c-format msgid "failed to remove link %s" msgstr "删除链接 %s 失败" #: src/xen/xs_internal.c:300 msgid "failed to connect to Xen Store" msgstr "连接到 Xen Store 失败" #: src/xen/xs_internal.c:309 msgid "failed to allocate activeDomainList" msgstr "分配 activeDomainList 失败" #: src/xen/xs_internal.c:318 msgid "failed to allocate xsWatchList" msgstr "分配 xsWatchList 失败" #: src/xen/xs_internal.c:327 msgid "adding watch @releaseDomain" msgstr "正在添加 watch @releaseDomain" #: src/xen/xs_internal.c:336 msgid "adding watch @introduceDomain" msgstr "正在添加 watch @introduceDomain" #: src/xen/xs_internal.c:1120 msgid "watch already tracked" msgstr "已跟踪 watch" #: src/xen/xs_internal.c:1136 msgid "reallocating list" msgstr "正在分配列表" #: tools/console.c:76 #, c-format msgid "unable to open tty %s: %s\n" msgstr "无法打开 tty %s: %s\n" #: tools/console.c:87 #, c-format msgid "unable to get tty attributes: %s\n" msgstr "无法获得 tty 属性：%s\n" #: tools/console.c:96 #, c-format msgid "unable to set tty attributes: %s\n" msgstr "无法设定 tty 属性：%s\n" #: tools/console.c:131 #, c-format msgid "failure waiting for I/O: %s\n" msgstr "等待 I/O 失败：%s\n" #: tools/console.c:145 #, c-format msgid "failure reading input: %s\n" msgstr "读取输入失败：%s\n" #: tools/console.c:167 #, c-format msgid "failure writing output: %s\n" msgstr "写入输入失败：%s\n" #: tools/virsh.c:354 msgid "unknown error" msgstr "未知错误" #: tools/virsh.c:375 msgid "print help" msgstr "打印帮助" #: tools/virsh.c:376 msgid "Prints global help or command specific help." msgstr "打印全部帮助或特定命令的帮助。" #: tools/virsh.c:382 msgid "name of command" msgstr "命令名" #: tools/virsh.c:394 msgid "" "Commands:\n" "\n" msgstr "" "命令：\n" "\n" #: tools/virsh.c:407 msgid "autostart a domain" msgstr "自动开始一个域" #: tools/virsh.c:409 msgid "Configure a domain to be automatically started at boot." msgstr "设置一个域在启动时自动开始." #: tools/virsh.c:414 tools/virsh.c:512 tools/virsh.c:726 tools/virsh.c:762 #: tools/virsh.c:819 tools/virsh.c:886 tools/virsh.c:1137 tools/virsh.c:1180 #: tools/virsh.c:1423 tools/virsh.c:1466 tools/virsh.c:1504 tools/virsh.c:1542 #: tools/virsh.c:1580 tools/virsh.c:1618 tools/virsh.c:1769 tools/virsh.c:1855 #: tools/virsh.c:1992 tools/virsh.c:2048 tools/virsh.c:2104 tools/virsh.c:2223 #: tools/virsh.c:2468 tools/virsh.c:6055 tools/virsh.c:6130 tools/virsh.c:6191 #: tools/virsh.c:6249 tools/virsh.c:6307 tools/virsh.c:6423 tools/virsh.c:6543 #: tools/virsh.c:6700 tools/virsh.c:7012 msgid "domain name, id or uuid" msgstr "域名，id 或 uuid" #: tools/virsh.c:415 tools/virsh.c:2552 tools/virsh.c:3523 msgid "disable autostarting" msgstr "禁止自动启动" #: tools/virsh.c:436 #, c-format msgid "Failed to mark domain %s as autostarted" msgstr "把域 %s标记为自动开始失败" #: tools/virsh.c:438 #, c-format msgid "Failed to unmark domain %s as autostarted" msgstr "把域 %s取消标记为自动开始失败" #: tools/virsh.c:444 #, c-format msgid "Domain %s marked as autostarted\n" msgstr "域 %s标记为自动开始\n" #: tools/virsh.c:446 #, c-format msgid "Domain %s unmarked as autostarted\n" msgstr "域 %s取消标记为自动开始\n" #: tools/virsh.c:456 msgid "(re)connect to hypervisor" msgstr "连接（重新连接）到 hypervisor" #: tools/virsh.c:458 msgid "" "Connect to local hypervisor. This is built-in command after shell start up." msgstr "连接到本地管理程序。这是在 shell 启动后内建的命令。" #: tools/virsh.c:463 msgid "hypervisor connection URI" msgstr "管理程序连接 URI" #: tools/virsh.c:464 msgid "read-only connection" msgstr "只读连接" #: tools/virsh.c:475 msgid "Failed to disconnect from the hypervisor" msgstr "从管理程序断开连接失败" #: tools/virsh.c:494 msgid "Failed to connect to the hypervisor" msgstr "连接到管理程序失败" #: tools/virsh.c:505 msgid "connect to the guest console" msgstr "连接到客户会话" #: tools/virsh.c:507 msgid "Connect the virtual serial console for the guest" msgstr "连接客户真实串行控制台" #: tools/virsh.c:528 msgid "Failed to get local hostname" msgstr "获得本地主机名失败" #: tools/virsh.c:533 msgid "Failed to get connection hostname" msgstr "接受连接主机名失败" #: tools/virsh.c:538 msgid "Cannot connect to a remote console device" msgstr "无法连接到远程控制台设备" #: tools/virsh.c:559 #, c-format msgid "Connected to domain %s\n" msgstr "连接到域 %s\n" #: tools/virsh.c:560 msgid "Escape character is ^]\n" msgstr "换码符为 ^]\n" #: tools/virsh.c:564 msgid "No console available for domain\n" msgstr "域控制台不可用\n" #: tools/virsh.c:603 msgid "list domains" msgstr "列出域" #: tools/virsh.c:604 msgid "Returns list of domains." msgstr "返回域列表" #: tools/virsh.c:609 msgid "list inactive domains" msgstr "列出不活跃的域" #: tools/virsh.c:610 msgid "list inactive & active domains" msgstr "不活跃和活跃的域列表" #: tools/virsh.c:632 tools/virsh.c:639 msgid "Failed to list active domains" msgstr "列出活跃的域失败" #: tools/virsh.c:650 tools/virsh.c:658 msgid "Failed to list inactive domains" msgstr "列出不活跃的域失败" #: tools/virsh.c:667 msgid "Id" msgstr "Id" #: tools/virsh.c:667 tools/virsh.c:2933 tools/virsh.c:3206 tools/virsh.c:4175 #: tools/virsh.c:5137 msgid "Name" msgstr "名称" #: tools/virsh.c:667 tools/virsh.c:2933 tools/virsh.c:3206 tools/virsh.c:4175 msgid "State" msgstr "状态" #: tools/virsh.c:680 tools/virsh.c:702 tools/virsh.c:8126 tools/virsh.c:8142 msgid "no state" msgstr "没有状态" #: tools/virsh.c:720 msgid "domain state" msgstr "域状态" #: tools/virsh.c:721 msgid "Returns state about a domain." msgstr "返回某个域的状态。" #: tools/virsh.c:756 msgid "get device block stats for a domain" msgstr "获得域设备块状态" #: tools/virsh.c:757 msgid "Get device block stats for a running domain." msgstr "获得运行域的设备块状态。" #: tools/virsh.c:763 msgid "block device" msgstr "阻止设备" #: tools/virsh.c:786 #, c-format msgid "Failed to get block stats %s %s" msgstr "无法获得块状态 %s %s" #: tools/virsh.c:813 msgid "get network interface stats for a domain" msgstr "获得域网络接口状态" #: tools/virsh.c:814 msgid "Get network interface stats for a running domain." msgstr "获得运行域的网络接口状态。" #: tools/virsh.c:820 msgid "interface device" msgstr "接口设备" #: tools/virsh.c:843 #, c-format msgid "Failed to get interface stats %s %s" msgstr "无法获得接口状态 %s %s" #: tools/virsh.c:880 msgid "suspend a domain" msgstr "挂起一个域" #: tools/virsh.c:881 msgid "Suspend a running domain." msgstr "挂起一个运行的域。" #: tools/virsh.c:904 #, c-format msgid "Domain %s suspended\n" msgstr "域 %s 被挂起\n" #: tools/virsh.c:906 #, c-format msgid "Failed to suspend domain %s" msgstr "挂起 %s 域失败" #: tools/virsh.c:918 msgid "create a domain from an XML file" msgstr "从一个 XML 文件创建一个域" #: tools/virsh.c:919 msgid "Create a domain." msgstr "创建一个域" #: tools/virsh.c:924 tools/virsh.c:981 msgid "file containing an XML domain description" msgstr "文件包括一个 XML 域描述" #: tools/virsh.c:926 tools/virsh.c:1086 msgid "attach to console after creation" msgstr "创建后附加到控制台" #: tools/virsh.c:957 #, c-format msgid "Domain %s created from %s\n" msgstr "域 %s 被创建（从 %s）\n" #: tools/virsh.c:965 #, c-format msgid "Failed to create domain from %s" msgstr "从 %s 创建域失败" #: tools/virsh.c:975 msgid "define (but don't start) a domain from an XML file" msgstr "从一个 XML 文件定义（但不开始）一个域" #: tools/virsh.c:976 msgid "Define a domain." msgstr "定义一个域。" #: tools/virsh.c:1008 #, c-format msgid "Domain %s defined from %s\n" msgstr "定义域 %s（从 %s）\n" #: tools/virsh.c:1012 #, c-format msgid "Failed to define domain from %s" msgstr "从 %s 定义域失败" #: tools/virsh.c:1022 msgid "undefine an inactive domain" msgstr "取消定义一个非活跃的域" #: tools/virsh.c:1023 msgid "Undefine the configuration for an inactive domain." msgstr "取消定义一个非活跃域的配置。" #: tools/virsh.c:1028 tools/virsh.c:2394 msgid "domain name or uuid" msgstr "域名或 uuid" #: tools/virsh.c:1051 #, c-format msgid "" "a running domain like %s cannot be undefined;\n" "to undefine, first shutdown then undefine using its name or UUID" msgstr "" "无法取消定义一个类似 %s 的正在运行的；\n" "要取消定义，请首先关机，然后使用其名称或者 UUID 取消定义" #: tools/virsh.c:1063 #, c-format msgid "Domain %s has been undefined\n" msgstr "域 %s 已经被取消定义\n" #: tools/virsh.c:1065 #, c-format msgid "Failed to undefine domain %s" msgstr "取消定义域 %s 失败" #: tools/virsh.c:1078 msgid "start a (previously defined) inactive domain" msgstr "开始一个（以前定义的）非活跃的域" #: tools/virsh.c:1079 msgid "Start a domain." msgstr "开始一个域" #: tools/virsh.c:1084 msgid "name of the inactive domain" msgstr "非活跃域的名称" #: tools/virsh.c:1107 msgid "Domain is already active" msgstr "域已经活跃" #: tools/virsh.c:1113 #, c-format msgid "Domain %s started\n" msgstr "域 %s 已开始\n" #: tools/virsh.c:1120 #, c-format msgid "Failed to start domain %s" msgstr "开始域 %s 失败" #: tools/virsh.c:1131 msgid "save a domain state to a file" msgstr "把一个域的状态保存到一个文件" #: tools/virsh.c:1132 msgid "Save a running domain." msgstr "保存一个运行的域。" #: tools/virsh.c:1138 msgid "where to save the data" msgstr "数据存到什么地方" #: tools/virsh.c:1160 #, c-format msgid "Domain %s saved to %s\n" msgstr "域 %s 被存到 %s\n" #: tools/virsh.c:1162 #, c-format msgid "Failed to save domain %s to %s" msgstr "把域 %s 存到 %s 失败" #: tools/virsh.c:1174 msgid "show/set scheduler parameters" msgstr "显示/设置日程安排变量" #: tools/virsh.c:1175 msgid "Show/Set scheduler parameters." msgstr "显示/设置日程安排变量" #: tools/virsh.c:1181 msgid "parameter=value" msgstr "parameter=value" #: tools/virsh.c:1182 msgid "weight for XEN_CREDIT" msgstr "XEN_CREDIT 重量" #: tools/virsh.c:1183 msgid "cap for XEN_CREDIT" msgstr "XEN_CREDIT的cap" #: tools/virsh.c:1201 msgid "Invalid value of weight" msgstr "无效的重量值" #: tools/virsh.c:1216 msgid "Invalid value of cap" msgstr "无效的容量值" #: tools/virsh.c:1228 msgid "Invalid syntax for --set, expecting name=value" msgstr "" #: tools/virsh.c:1243 #, fuzzy msgid "Invalid value for parameter, expecting an int" msgstr "参数的无效值" #: tools/virsh.c:1250 msgid "Invalid value for parameter, expecting an unsigned int" msgstr "" #: tools/virsh.c:1257 msgid "Invalid value for parameter, expecting an long long" msgstr "" #: tools/virsh.c:1264 msgid "Invalid value for parameter, expecting an unsigned long long" msgstr "" #: tools/virsh.c:1270 #, fuzzy msgid "Invalid value for parameter, expecting a double" msgstr "参数的无效值" #: tools/virsh.c:1304 tools/virsh.c:1308 msgid "Scheduler" msgstr "调度程序" #: tools/virsh.c:1308 msgid "Unknown" msgstr "未知" #: tools/virsh.c:1380 msgid "restore a domain from a saved state in a file" msgstr "从一个存在一个文件中的状态恢复一个域" #: tools/virsh.c:1381 msgid "Restore a domain." msgstr "恢复一个域。" #: tools/virsh.c:1386 msgid "the state to restore" msgstr "恢复的状态" #: tools/virsh.c:1405 #, c-format msgid "Domain restored from %s\n" msgstr "从 %s 恢复域\n" #: tools/virsh.c:1407 #, c-format msgid "Failed to restore domain from %s" msgstr "从 %s 恢复域失败" #: tools/virsh.c:1417 msgid "dump the core of a domain to a file for analysis" msgstr "把一个域的内核 dump 到一个文件中以方便分析" #: tools/virsh.c:1418 msgid "Core dump a domain." msgstr "内核 dump 一个域。" #: tools/virsh.c:1424 msgid "where to dump the core" msgstr "内核 dump 到什么地方" #: tools/virsh.c:1446 #, c-format msgid "Domain %s dumped to %s\n" msgstr "将域 %s 转储到 %s\n" #: tools/virsh.c:1448 #, c-format msgid "Failed to core dump domain %s to %s" msgstr "将域 %s 核转储到 %s 失败" #: tools/virsh.c:1460 msgid "resume a domain" msgstr "重新恢复一个域" #: tools/virsh.c:1461 msgid "Resume a previously suspended domain." msgstr "重新恢复一个以前被挂起的域。" #: tools/virsh.c:1484 #, c-format msgid "Domain %s resumed\n" msgstr "域 %s 被重新恢复\n" #: tools/virsh.c:1486 #, c-format msgid "Failed to resume domain %s" msgstr "恢复域 %s 失败" #: tools/virsh.c:1498 msgid "gracefully shutdown a domain" msgstr "关闭一个域" #: tools/virsh.c:1499 msgid "Run shutdown in the target domain." msgstr "在目标域中执行关闭行为。" #: tools/virsh.c:1522 #, c-format msgid "Domain %s is being shutdown\n" msgstr "域 %s 被关闭\n" #: tools/virsh.c:1524 #, c-format msgid "Failed to shutdown domain %s" msgstr "关闭域 %s 失败" #: tools/virsh.c:1536 msgid "reboot a domain" msgstr "重新启动一个域" #: tools/virsh.c:1537 msgid "Run a reboot command in the target domain." msgstr "在目标域中执行重新启动命令。" #: tools/virsh.c:1560 #, c-format msgid "Domain %s is being rebooted\n" msgstr "域 %s 正在被重新启动\n" #: tools/virsh.c:1562 #, c-format msgid "Failed to reboot domain %s" msgstr "重新启动域 %s 失败" #: tools/virsh.c:1574 msgid "destroy a domain" msgstr "删除一个域" #: tools/virsh.c:1575 msgid "Destroy a given domain." msgstr "删除一个指定的域。" #: tools/virsh.c:1598 #, c-format msgid "Domain %s destroyed\n" msgstr "域 %s 被删除\n" #: tools/virsh.c:1600 #, c-format msgid "Failed to destroy domain %s" msgstr "删除域 %s 失败" #: tools/virsh.c:1612 msgid "domain information" msgstr "域信息" #: tools/virsh.c:1613 msgid "Returns basic information about the domain." msgstr "返回这个域的基本信息。" #: tools/virsh.c:1641 tools/virsh.c:1643 msgid "Id:" msgstr "Id:" #: tools/virsh.c:1644 tools/virsh.c:4410 tools/virsh.c:5027 msgid "Name:" msgstr "名称：" #: tools/virsh.c:1647 tools/virsh.c:4413 msgid "UUID:" msgstr "UUID:" #: tools/virsh.c:1650 msgid "OS Type:" msgstr "OS 类型：" #: tools/virsh.c:1655 tools/virsh.c:1813 tools/virsh.c:4420 tools/virsh.c:4424 #: tools/virsh.c:4428 tools/virsh.c:4432 msgid "State:" msgstr "状态：" #: tools/virsh.c:1658 tools/virsh.c:2175 msgid "CPU(s):" msgstr "CPU：" #: tools/virsh.c:1665 tools/virsh.c:1820 msgid "CPU time:" msgstr "CPU 时间：" #: tools/virsh.c:1669 tools/virsh.c:1672 msgid "Max memory:" msgstr "最大内存：" #: tools/virsh.c:1673 msgid "no limit" msgstr "没有限制" #: tools/virsh.c:1675 msgid "Used memory:" msgstr "使用的内存：" #: tools/virsh.c:1683 msgid "Autostart:" msgstr "自动启动：" #: tools/virsh.c:1684 msgid "enable" msgstr "启用" #: tools/virsh.c:1684 msgid "disable" msgstr "禁用" #: tools/virsh.c:1697 msgid "Security model:" msgstr "安全性模式：" #: tools/virsh.c:1698 msgid "Security DOI:" msgstr "安全性 DOI：" #: tools/virsh.c:1707 msgid "Security label:" msgstr "安全性标签：" #: tools/virsh.c:1720 msgid "NUMA free memory" msgstr "NUMA可用内存" #: tools/virsh.c:1721 msgid "display available free memory for the NUMA cell." msgstr "显示可用的NUMA单元空闲内存" #: tools/virsh.c:1726 msgid "NUMA cell number" msgstr "NUMA 单元 数" #: tools/virsh.c:1752 msgid "Total" msgstr "总量" #: tools/virsh.c:1763 msgid "domain vcpu information" msgstr "域 vcpu 的信息" #: tools/virsh.c:1764 msgid "Returns basic information about the domain virtual CPUs." msgstr "恢复这个域虚拟 CPU 的基本信息。" #: tools/virsh.c:1811 msgid "VCPU:" msgstr "VCPU:" #: tools/virsh.c:1812 msgid "CPU:" msgstr "CPU:" #: tools/virsh.c:1822 msgid "CPU Affinity:" msgstr "CPU关系:" #: tools/virsh.c:1834 msgid "Domain shut off, virtual CPUs not present." msgstr "关闭域,虚拟CPU不存在." #: tools/virsh.c:1849 msgid "control domain vcpu affinity" msgstr "控制域 vcpu affinity" #: tools/virsh.c:1850 msgid "Pin domain VCPUs to host physical CPUs." msgstr "把域 VCPU 插入到主机的物理 CPU 中。" #: tools/virsh.c:1856 msgid "vcpu number" msgstr "vcpu 号" #: tools/virsh.c:1857 msgid "host cpu number(s) (comma separated)" msgstr "主机 cpu 号(以逗号分隔)" #: tools/virsh.c:1884 msgid "vcpupin: Invalid or missing vCPU number." msgstr "vcpupin：无效或者丢失的 vCPU 号。" #: tools/virsh.c:1890 msgid "vcpupin: Missing cpulist" msgstr "vcpupin：缺少 cpu 列表" #: tools/virsh.c:1901 msgid "vcpupin: failed to get domain informations." msgstr "vcpupin：获得域信息失败" #: tools/virsh.c:1907 msgid "vcpupin: Invalid vCPU number." msgstr "vcpupin：无效 vCPU 号。" #: tools/virsh.c:1916 msgid "cpulist: Invalid format. Empty string." msgstr "cpulist：不可用格式。空字符串。" #: tools/virsh.c:1926 #, c-format msgid "" "cpulist: %s: Invalid format. Expecting digit at position %d (near '%c')." msgstr "cpu列表:%s:不可用格式.在%d位置期望数字('%c'附近)." #: tools/virsh.c:1938 #, c-format msgid "" "cpulist: %s: Invalid format. Expecting digit or comma at position %d (near '%" "c')." msgstr "cpu列表:%s:不可用格式.在%d位置期望数字或逗号('%c'附近)." #: tools/virsh.c:1947 #, c-format msgid "cpulist: %s: Invalid format. Trailing comma at position %d." msgstr "cpu列表:%s:不可用格式.在%d位置结尾逗号." #: tools/virsh.c:1963 #, c-format msgid "Physical CPU %d doesn't exist." msgstr "物理 CPU %d 不存在." #: tools/virsh.c:1986 msgid "change number of virtual CPUs" msgstr "改变虚拟 CPU 的号" #: tools/virsh.c:1987 msgid "Change the number of virtual CPUs in the guest domain." msgstr "在客户域中修改虚拟 CPU 号。" #: tools/virsh.c:1993 msgid "number of virtual CPUs" msgstr "虚拟 CPU 号" #: tools/virsh.c:2013 msgid "Invalid number of virtual CPUs." msgstr "虚拟 CPU 的数无效" #: tools/virsh.c:2025 msgid "Too many virtual CPUs." msgstr "虚拟 CPU太多" #: tools/virsh.c:2042 msgid "change memory allocation" msgstr "改变内存的分配" #: tools/virsh.c:2043 msgid "Change the current memory allocation in the guest domain." msgstr "改变当前在 guest 域中的内存分配。" #: tools/virsh.c:2049 msgid "number of kilobytes of memory" msgstr "内存的千字节数" #: tools/virsh.c:2070 tools/virsh.c:2082 tools/virsh.c:2126 #, c-format msgid "Invalid value of %d for memory size" msgstr "内存大小 %d 值不可用" #: tools/virsh.c:2076 msgid "Unable to verify MaxMemorySize" msgstr "不能查证最大内存大小" #: tools/virsh.c:2098 msgid "change maximum memory limit" msgstr "改变最大内存限制值" #: tools/virsh.c:2099 msgid "Change the maximum memory allocation limit in the guest domain." msgstr "改变在客户域中的最大内存分配限制。" #: tools/virsh.c:2105 msgid "maximum memory limit in kilobytes" msgstr "最大内存限制的千字节数" #: tools/virsh.c:2132 msgid "Unable to verify current MemorySize" msgstr "不能查证当前内存大小" #: tools/virsh.c:2139 msgid "Unable to shrink current MemorySize" msgstr "无法减少当前内存大小" #: tools/virsh.c:2145 msgid "Unable to change MaxMemorySize" msgstr "不能改变最大内存大小" #: tools/virsh.c:2157 msgid "node information" msgstr "节点信息" #: tools/virsh.c:2158 msgid "Returns basic information about the node." msgstr "返回关于这个节点的基本信息。" #: tools/virsh.c:2171 msgid "failed to get node information" msgstr "获得节点信息失败" #: tools/virsh.c:2174 msgid "CPU model:" msgstr "CPU 型号：" #: tools/virsh.c:2176 msgid "CPU frequency:" msgstr "CPU 频率：" #: tools/virsh.c:2177 msgid "CPU socket(s):" msgstr "CPU socket：" #: tools/virsh.c:2178 msgid "Core(s) per socket:" msgstr "每个 socket 的内核数：" #: tools/virsh.c:2179 msgid "Thread(s) per core:" msgstr "每个内核的线程数：" #: tools/virsh.c:2180 msgid "NUMA cell(s):" msgstr "NUMA 单元：" #: tools/virsh.c:2181 msgid "Memory size:" msgstr "内存大小：" #: tools/virsh.c:2190 msgid "capabilities" msgstr "性能" #: tools/virsh.c:2191 msgid "Returns capabilities of hypervisor/driver." msgstr "返回 管理程序/驱动器性能." #: tools/virsh.c:2204 msgid "failed to get capabilities" msgstr "获得性能失败" #: tools/virsh.c:2217 msgid "domain information in XML" msgstr "XML 中的域信息" #: tools/virsh.c:2218 msgid "Output the domain information as an XML dump to stdout." msgstr "把域信息作为一个 XML 输出到 stdout。" #: tools/virsh.c:2224 msgid "show inactive defined XML" msgstr "显示不活跃定义的 XML" #: tools/virsh.c:2225 msgid "include security sensitive information in XML dump" msgstr "包括 XML 转储中与安全性相关的信息" #: tools/virsh.c:2266 #, fuzzy msgid "Convert native config to domain XML" msgstr "无法为域搜索配置文件" #: tools/virsh.c:2267 #, fuzzy msgid "Convert native guest configuration format to domain XML format." msgstr "编辑某个域的 XML 配置。" #: tools/virsh.c:2272 msgid "source config data format" msgstr "" #: tools/virsh.c:2273 #, fuzzy msgid "config data file to import from" msgstr "配置文件语法错误" #: tools/virsh.c:2312 msgid "Convert domain XML to native config" msgstr "" #: tools/virsh.c:2313 msgid "Convert domain XML config to a native guest configuration format." msgstr "" #: tools/virsh.c:2318 msgid "target config data type format" msgstr "" #: tools/virsh.c:2319 msgid "xml data file to export from" msgstr "" #: tools/virsh.c:2358 msgid "convert a domain id or UUID to domain name" msgstr "将域 id 或 UUID 转换为域名" #: tools/virsh.c:2364 msgid "domain id or uuid" msgstr "域 id 或 uuid" #: tools/virsh.c:2388 msgid "convert a domain name or UUID to domain id" msgstr "把一个域名或 UUID 转换为域 id" #: tools/virsh.c:2423 msgid "convert a domain name or id to domain UUID" msgstr "把一个域名或 id 转换为域 UUID" #: tools/virsh.c:2429 msgid "domain id or name" msgstr "域 id 或域名" #: tools/virsh.c:2448 msgid "failed to get domain UUID" msgstr "获得域 UUID 失败" #: tools/virsh.c:2458 msgid "migrate domain to another host" msgstr "将域迁移到另一个主机中" #: tools/virsh.c:2459 msgid "Migrate domain to another host. Add --live for live migration." msgstr "将域迁移到另一个主机中。热迁移时添加 --live。" #: tools/virsh.c:2464 msgid "live migration" msgstr "热迁移" #: tools/virsh.c:2465 #, fuzzy msgid "peer-2-peer migration" msgstr "热迁移" #: tools/virsh.c:2466 #, fuzzy msgid "direct migration" msgstr "热迁移" #: tools/virsh.c:2467 #, fuzzy msgid "tunnelled migration" msgstr "热迁移" #: tools/virsh.c:2469 msgid "connection URI of the destination host" msgstr "连接目的地主机的 URI" #: tools/virsh.c:2470 msgid "migration URI, usually can be omitted" msgstr "迁移 URI， 通常可省略" #: tools/virsh.c:2471 msgid "rename to new name during migration (if supported)" msgstr "在迁移过长中重新命名为一个新名称（如果支持）" #: tools/virsh.c:2492 msgid "migrate: Missing desturi" msgstr "迁移：丢失 desturi" #: tools/virsh.c:2513 msgid "migrate: Unexpected migrateuri for peer2peer/direct migration" msgstr "" #: tools/virsh.c:2544 msgid "autostart a network" msgstr "自动开始网络" #: tools/virsh.c:2546 msgid "Configure a network to be automatically started at boot." msgstr "设置一个网络在启动时自动开始." #: tools/virsh.c:2551 tools/virsh.c:3071 msgid "network name or uuid" msgstr "网络名或 uuid" #: tools/virsh.c:2573 #, c-format msgid "failed to mark network %s as autostarted" msgstr "把网络%s标记为自动启动失败" #: tools/virsh.c:2575 #, c-format msgid "failed to unmark network %s as autostarted" msgstr "把网络%s取消标记为自动启动失败" #: tools/virsh.c:2581 #, c-format msgid "Network %s marked as autostarted\n" msgstr "网络%s标记为自动启动\n" #: tools/virsh.c:2583 #, c-format msgid "Network %s unmarked as autostarted\n" msgstr "网络%s取消标记为自动启动\n" #: tools/virsh.c:2593 msgid "create a network from an XML file" msgstr "从一个 XML 文件创建一个网络" #: tools/virsh.c:2594 msgid "Create a network." msgstr "创建一个网络" #: tools/virsh.c:2599 tools/virsh.c:2647 msgid "file containing an XML network description" msgstr "文件包括一个 XML网络描述" #: tools/virsh.c:2626 #, c-format msgid "Network %s created from %s\n" msgstr "从%s创建网络%s \n" #: tools/virsh.c:2630 #, c-format msgid "Failed to create network from %s" msgstr "从 %s 创建网络失败" #: tools/virsh.c:2641 msgid "define (but don't start) a network from an XML file" msgstr "从一个 XML 文件定义(但不开始)一个网络" #: tools/virsh.c:2642 msgid "Define a network." msgstr "定义一个网络." #: tools/virsh.c:2674 #, c-format msgid "Network %s defined from %s\n" msgstr "从 %s定义网络%s\n" #: tools/virsh.c:2678 #, c-format msgid "Failed to define network from %s" msgstr "从 %s 定义网络失败" #: tools/virsh.c:2689 msgid "destroy a network" msgstr "删除一个网络" #: tools/virsh.c:2690 msgid "Destroy a given network." msgstr "删除一个指定网络." #: tools/virsh.c:2695 tools/virsh.c:2734 tools/virsh.c:7115 msgid "network name, id or uuid" msgstr "网络名,id 或 uuid" #: tools/virsh.c:2713 #, c-format msgid "Network %s destroyed\n" msgstr "网络 %s 被删除\n" #: tools/virsh.c:2715 #, c-format msgid "Failed to destroy network %s" msgstr "删除网络 %s 失败" #: tools/virsh.c:2728 msgid "network information in XML" msgstr "XML 中的网络信息" #: tools/virsh.c:2729 msgid "Output the network information as an XML dump to stdout." msgstr "把网络信息作为一个 XML 输出到 stdout。" #: tools/virsh.c:2768 #, fuzzy msgid "edit XML configuration for a physical host interface" msgstr "编辑某个域的 XML 配置" #: tools/virsh.c:2769 #, fuzzy msgid "Edit the XML configuration for a physical host interface." msgstr "编辑某个域的 XML 配置。" #: tools/virsh.c:2774 tools/virsh.c:3320 tools/virsh.c:3406 tools/virsh.c:3444 #: tools/virsh.c:3482 #, fuzzy msgid "interface name or MAC address" msgstr "未找到MAC地址为%s的界面" #: tools/virsh.c:2817 #, fuzzy, c-format msgid "Interface %s XML configuration not changed.\n" msgstr "没有更改域 %s XML 配置。\n" #: tools/virsh.c:2833 tools/virsh.c:7074 msgid "ERROR: the XML configuration was changed by another user" msgstr "错误：另一位用户更改了 XML 配置" #: tools/virsh.c:2843 #, fuzzy, c-format msgid "Interface %s XML configuration edited.\n" msgstr "编辑了域 %s XML 配置。\n" #: tools/virsh.c:2868 msgid "list networks" msgstr "列出网络" #: tools/virsh.c:2869 msgid "Returns list of networks." msgstr "返回网络列表" #: tools/virsh.c:2874 msgid "list inactive networks" msgstr "列出不活跃的网络" #: tools/virsh.c:2875 msgid "list inactive & active networks" msgstr "列出不活跃和活跃的网络" #: tools/virsh.c:2895 tools/virsh.c:2903 msgid "Failed to list active networks" msgstr "列出活跃的网络失败" #: tools/virsh.c:2914 tools/virsh.c:2924 msgid "Failed to list inactive networks" msgstr "列出不活跃的网络失败" #: tools/virsh.c:2934 tools/virsh.c:4175 msgid "Autostart" msgstr "自动开始" #: tools/virsh.c:2950 tools/virsh.c:2973 tools/virsh.c:4190 tools/virsh.c:4213 msgid "no autostart" msgstr "不自动开始" #: tools/virsh.c:2956 tools/virsh.c:3222 tools/virsh.c:4196 msgid "active" msgstr "活动" #: tools/virsh.c:2979 tools/virsh.c:3239 tools/virsh.c:4219 tools/virsh.c:4421 msgid "inactive" msgstr "不活跃" #: tools/virsh.c:2995 msgid "convert a network UUID to network name" msgstr "把一个网络UUID 转换为网络名" #: tools/virsh.c:3001 msgid "network uuid" msgstr "网络uuid" #: tools/virsh.c:3026 msgid "start a (previously defined) inactive network" msgstr "开始一个(以前定义的)不活跃的网络" #: tools/virsh.c:3027 msgid "Start a network." msgstr "开始一个网络." #: tools/virsh.c:3032 msgid "name of the inactive network" msgstr "非活跃网络的名称" #: tools/virsh.c:3049 #, c-format msgid "Network %s started\n" msgstr "网络 %s 已开始\n" #: tools/virsh.c:3052 #, c-format msgid "Failed to start network %s" msgstr "开始网络 %s 失败" #: tools/virsh.c:3065 msgid "undefine an inactive network" msgstr "取消定义一个非活跃的网络" #: tools/virsh.c:3066 msgid "Undefine the configuration for an inactive network." msgstr "取消定义一个非活跃网络配置。" #: tools/virsh.c:3089 #, c-format msgid "Network %s has been undefined\n" msgstr "网络 %s 已经被取消定义\n" #: tools/virsh.c:3091 #, c-format msgid "Failed to undefine network %s" msgstr "取消定义网络 %s 失败" #: tools/virsh.c:3104 msgid "convert a network name to network UUID" msgstr "把一个网络名转换为网络UUID" #: tools/virsh.c:3110 msgid "network name" msgstr "网络名" #: tools/virsh.c:3130 msgid "failed to get network UUID" msgstr "获得网络UUID 失败" #: tools/virsh.c:3142 msgid "list physical host interfaces" msgstr "" #: tools/virsh.c:3143 #, fuzzy msgid "Returns list of physical host interfaces." msgstr "返回域列表" #: tools/virsh.c:3148 #, fuzzy msgid "list inactive interfaces" msgstr "列出不活跃的网络" #: tools/virsh.c:3149 #, fuzzy msgid "list inactive & active interfaces" msgstr "列出不活跃和活跃的网络" #: tools/virsh.c:3168 tools/virsh.c:3176 #, fuzzy msgid "Failed to list active interfaces" msgstr "列出活跃的网络失败" #: tools/virsh.c:3187 tools/virsh.c:3197 #, fuzzy msgid "Failed to list inactive interfaces" msgstr "列出不活跃的网络失败" #: tools/virsh.c:3207 #, fuzzy msgid "MAC Address" msgstr "MAC 地址" #: tools/virsh.c:3254 #, fuzzy msgid "convert an interface MAC address to interface name" msgstr "未找到MAC地址为%s的界面" #: tools/virsh.c:3260 #, fuzzy msgid "interface mac" msgstr "接口设备" #: tools/virsh.c:3284 #, fuzzy msgid "convert an interface name to interface MAC address" msgstr "未找到MAC地址为%s的界面" #: tools/virsh.c:3290 #, fuzzy msgid "interface name" msgstr "接口设备" #: tools/virsh.c:3314 #, fuzzy msgid "interface information in XML" msgstr "XML 中的网络信息" #: tools/virsh.c:3315 #, fuzzy msgid "" "Output the physical host interface information as an XML dump to stdout." msgstr "把域信息作为一个 XML 输出到 stdout。" #: tools/virsh.c:3353 #, fuzzy msgid "define (but don't start) a physical host interface from an XML file" msgstr "从一个 XML 文件定义（但不开始）一个域" #: tools/virsh.c:3354 msgid "Define a physical host interface." msgstr "" #: tools/virsh.c:3359 #, fuzzy msgid "file containing an XML interface description" msgstr "文件包括一个 XML网络描述" #: tools/virsh.c:3386 #, fuzzy, c-format msgid "Interface %s defined from %s\n" msgstr "从 %s定义网络%s\n" #: tools/virsh.c:3390 #, fuzzy, c-format msgid "Failed to define interface from %s" msgstr "从 %s 定义网络失败" #: tools/virsh.c:3400 msgid "undefine a physical host interface (remove it from configuration)" msgstr "" #: tools/virsh.c:3401 #, fuzzy msgid "undefine an interface." msgstr "取消定义一个不活跃的池" #: tools/virsh.c:3424 #, fuzzy, c-format msgid "Interface %s undefined\n" msgstr "接口设备" #: tools/virsh.c:3426 #, fuzzy, c-format msgid "Failed to undefine interface %s" msgstr "取消定义网络 %s 失败" #: tools/virsh.c:3438 msgid "start a physical host interface (enable it / \"if-up\")" msgstr "" #: tools/virsh.c:3439 msgid "start a physical host interface." msgstr "" #: tools/virsh.c:3462 #, fuzzy, c-format msgid "Interface %s started\n" msgstr "网络 %s 已开始\n" #: tools/virsh.c:3464 #, fuzzy, c-format msgid "Failed to start interface %s" msgstr "开始网络 %s 失败" #: tools/virsh.c:3476 msgid "destroy a physical host interface (disable it / \"if-down\")" msgstr "" #: tools/virsh.c:3477 msgid "destroy a physical host interface." msgstr "" #: tools/virsh.c:3500 #, fuzzy, c-format msgid "Interface %s destroyed\n" msgstr "网络 %s 被删除\n" #: tools/virsh.c:3502 #, fuzzy, c-format msgid "Failed to destroy interface %s" msgstr "删除网络 %s 失败" #: tools/virsh.c:3515 msgid "autostart a pool" msgstr "自动启动某个池" #: tools/virsh.c:3517 msgid "Configure a pool to be automatically started at boot." msgstr "将某个池设置为在引导时自动启动。" #: tools/virsh.c:3522 tools/virsh.c:3922 tools/virsh.c:3961 tools/virsh.c:4000 #: tools/virsh.c:4039 tools/virsh.c:4078 tools/virsh.c:4392 tools/virsh.c:4658 #: tools/virsh.c:4891 tools/virsh.c:4968 tools/virsh.c:5009 tools/virsh.c:5060 #: tools/virsh.c:5101 tools/virsh.c:5245 tools/virsh.c:7132 msgid "pool name or uuid" msgstr "池名或 uuid" #: tools/virsh.c:3544 #, c-format msgid "failed to mark pool %s as autostarted" msgstr "将池 %s 标记为自动启动失败" #: tools/virsh.c:3546 #, c-format msgid "failed to unmark pool %s as autostarted" msgstr "取消将池 %s 标记为自动启动失败" #: tools/virsh.c:3552 #, c-format msgid "Pool %s marked as autostarted\n" msgstr "池 %s 标记为自动启动\n" #: tools/virsh.c:3554 #, c-format msgid "Pool %s unmarked as autostarted\n" msgstr "取消将池 %s 标记为自动启动\n" #: tools/virsh.c:3564 msgid "create a pool from an XML file" msgstr "从一个 XML 文件中创建一个池" #: tools/virsh.c:3565 tools/virsh.c:3787 msgid "Create a pool." msgstr "创建一个池。" #: tools/virsh.c:3571 tools/virsh.c:3833 msgid "file containing an XML pool description" msgstr "包含 XML 池描述的文件" #: tools/virsh.c:3598 #, c-format msgid "Pool %s created from %s\n" msgstr "从 %s 中创建池 %s \n" #: tools/virsh.c:3602 #, c-format msgid "Failed to create pool from %s" msgstr "从 %s 创建池失败" #: tools/virsh.c:3613 #, fuzzy msgid "create a device defined by an XML file on the node" msgstr "从一个 XML 文件创建一个域" #: tools/virsh.c:3615 msgid "" "Create a device on the node. Note that this command creates devices on the " "physical host that can then be assigned to a virtual machine." msgstr "" #: tools/virsh.c:3623 #, fuzzy msgid "file containing an XML description of the device" msgstr "包含 XML 卷描述的文件" #: tools/virsh.c:3652 #, fuzzy, c-format msgid "Node device %s created from %s\n" msgstr "在 %s 中创建卷 %s\n" #: tools/virsh.c:3656 #, fuzzy, c-format msgid "Failed to create node device from %s" msgstr "在 %s 中创建卷失败" #: tools/virsh.c:3668 #, fuzzy msgid "destroy a device on the node" msgstr "这台主机中中的枚举设备" #: tools/virsh.c:3669 msgid "" "Destroy a device on the node. Note that this command destroys devices on " "the physical host " msgstr "" #: tools/virsh.c:3676 #, fuzzy msgid "name of the device to be destroyed" msgstr "非活跃网络的名称" #: tools/virsh.c:3700 #, fuzzy, c-format msgid "Destroyed node device '%s'\n" msgstr "重置节点设备" #: tools/virsh.c:3702 #, fuzzy, c-format msgid "Failed to destroy node device '%s'" msgstr "列出节点设备失败" #: tools/virsh.c:3715 msgid "name of the pool" msgstr "池的名称" #: tools/virsh.c:3716 msgid "print XML document, but don't define/create" msgstr "打印 XML 文档，但不能定义/创建" #: tools/virsh.c:3717 msgid "type of the pool" msgstr "池类型" #: tools/virsh.c:3718 msgid "source-host for underlying storage" msgstr "基本存储的源主机" #: tools/virsh.c:3719 msgid "source path for underlying storage" msgstr "基本存储的源路径" #: tools/virsh.c:3720 msgid "source device for underlying storage" msgstr "基本存储的源设备" #: tools/virsh.c:3721 msgid "source name for underlying storage" msgstr "基本存储的源路径名称" #: tools/virsh.c:3722 msgid "target for underlying storage" msgstr "基本存储的目标" #: tools/virsh.c:3769 tools/virsh.c:4624 tools/virsh.c:4929 msgid "Failed to allocate XML buffer" msgstr "分配 XML 缓冲失败" #: tools/virsh.c:3786 msgid "create a pool from a set of args" msgstr "从一组变量中创建一个池" #: tools/virsh.c:3812 #, c-format msgid "Pool %s created\n" msgstr "创建池 %s\n" #: tools/virsh.c:3815 #, c-format msgid "Failed to create pool %s" msgstr "创建池 %s 失败" #: tools/virsh.c:3827 msgid "define (but don't start) a pool from an XML file" msgstr "在一个 XML 文件中定义（但不启动）一个池" #: tools/virsh.c:3828 tools/virsh.c:3876 msgid "Define a pool." msgstr "定义池。" #: tools/virsh.c:3860 #, c-format msgid "Pool %s defined from %s\n" msgstr "在 %s 中定义池 %s\n" #: tools/virsh.c:3864 #, c-format msgid "Failed to define pool from %s" msgstr "在 %s 中定义池失败" #: tools/virsh.c:3875 msgid "define a pool from a set of args" msgstr "在一组变量中定义池" #: tools/virsh.c:3901 #, c-format msgid "Pool %s defined\n" msgstr "定义池 %s\n" #: tools/virsh.c:3904 #, c-format msgid "Failed to define pool %s" msgstr "定义池 %s 失败" #: tools/virsh.c:3916 msgid "build a pool" msgstr "建立池" #: tools/virsh.c:3917 msgid "Build a given pool." msgstr "建立一个给定的池。" #: tools/virsh.c:3940 #, c-format msgid "Pool %s built\n" msgstr "构建池 %s\n" #: tools/virsh.c:3942 #, c-format msgid "Failed to build pool %s" msgstr "构建池 %s 失败" #: tools/virsh.c:3955 msgid "destroy a pool" msgstr "销毁池" #: tools/virsh.c:3956 msgid "Destroy a given pool." msgstr "销毁一个给定的池。" #: tools/virsh.c:3979 #, c-format msgid "Pool %s destroyed\n" msgstr "销毁池 %s\n" #: tools/virsh.c:3981 #, c-format msgid "Failed to destroy pool %s" msgstr "销毁池 %s 失败" #: tools/virsh.c:3994 msgid "delete a pool" msgstr "删除池" #: tools/virsh.c:3995 msgid "Delete a given pool." msgstr "删除一个给定的池。" #: tools/virsh.c:4018 #, c-format msgid "Pool %s deleted\n" msgstr "池 %s 被删除\n" #: tools/virsh.c:4020 #, c-format msgid "Failed to delete pool %s" msgstr "删除池 %s 失败" #: tools/virsh.c:4033 msgid "refresh a pool" msgstr "刷新池" #: tools/virsh.c:4034 msgid "Refresh a given pool." msgstr "刷新给定的池。" #: tools/virsh.c:4057 #, c-format msgid "Pool %s refreshed\n" msgstr "池 %s 被刷新\n" #: tools/virsh.c:4059 #, c-format msgid "Failed to refresh pool %s" msgstr "刷新池 %s 失败" #: tools/virsh.c:4072 msgid "pool information in XML" msgstr "XML 中的池信息" #: tools/virsh.c:4073 msgid "Output the pool information as an XML dump to stdout." msgstr "把池信息作为 XML 转储输出到 stdout。" #: tools/virsh.c:4112 msgid "list pools" msgstr "列出池" #: tools/virsh.c:4113 msgid "Returns list of pools." msgstr "返回池列表" #: tools/virsh.c:4118 msgid "list inactive pools" msgstr "列出不活跃的池" #: tools/virsh.c:4119 msgid "list inactive & active pools" msgstr "不活跃和活跃的池" #: tools/virsh.c:4139 tools/virsh.c:4147 msgid "Failed to list active pools" msgstr "列出活跃的池失败" #: tools/virsh.c:4158 tools/virsh.c:4166 msgid "Failed to list inactive pools" msgstr "列出不活跃的池失败" #: tools/virsh.c:4234 msgid "find potential storage pool sources" msgstr "找到潜在存储池源" #: tools/virsh.c:4235 tools/virsh.c:4315 msgid "Returns XML document." msgstr "返回 XML 文档" #: tools/virsh.c:4241 msgid "type of storage pool sources to find" msgstr "要查找的存储池源类型" #: tools/virsh.c:4242 msgid "optional host to query" msgstr "要查询的可选主机" #: tools/virsh.c:4243 msgid "optional port to query" msgstr "要查询的可选端口" #: tools/virsh.c:4288 msgid "Out of memory" msgstr "内存溢出" #: tools/virsh.c:4291 #, c-format msgid "virAsprintf failed (errno %d)" msgstr "virAsprintf 失败（errno %d）" #: tools/virsh.c:4300 tools/virsh.c:4351 #, c-format msgid "Failed to find any %s pool sources" msgstr "查找任意 %s 池源失败" #: tools/virsh.c:4314 msgid "discover potential storage pool sources" msgstr "发现潜在存储池源" #: tools/virsh.c:4321 msgid "type of storage pool sources to discover" msgstr "要发现的存储池源类型" #: tools/virsh.c:4323 msgid "optional file of source xml to query for pools" msgstr "用来查询池的源 xml 可选文件" #: tools/virsh.c:4386 msgid "storage pool information" msgstr "存储池信息" #: tools/virsh.c:4387 msgid "Returns basic information about the storage pool." msgstr "返回关于这个存储池的基本信息。" #: tools/virsh.c:4425 msgid "building" msgstr "building" #: tools/virsh.c:4429 tools/virsh.c:8112 tools/virsh.c:8138 msgid "running" msgstr "running" #: tools/virsh.c:4433 msgid "degraded" msgstr "degraded" #: tools/virsh.c:4440 tools/virsh.c:5037 msgid "Capacity:" msgstr "容量：" #: tools/virsh.c:4443 tools/virsh.c:5040 msgid "Allocation:" msgstr "分配：" #: tools/virsh.c:4446 msgid "Available:" msgstr "可用：" #: tools/virsh.c:4461 msgid "convert a pool UUID to pool name" msgstr "将池 UUID 转换为池名称" #: tools/virsh.c:4467 msgid "pool uuid" msgstr "池 uuid" #: tools/virsh.c:4492 msgid "start a (previously defined) inactive pool" msgstr "启动一个（以前定义的）非活跃的池" #: tools/virsh.c:4493 msgid "Start a pool." msgstr "启动一个池。" #: tools/virsh.c:4498 msgid "name of the inactive pool" msgstr "非活跃池的名称" #: tools/virsh.c:4515 #, c-format msgid "Pool %s started\n" msgstr "池 %s 已启动\n" #: tools/virsh.c:4518 #, c-format msgid "Failed to start pool %s" msgstr "启动池 %s 失败" #: tools/virsh.c:4531 msgid "create a volume from a set of args" msgstr "从一组变量中创建卷" #: tools/virsh.c:4532 tools/virsh.c:4729 msgid "Create a vol." msgstr "创建一个卷。" #: tools/virsh.c:4537 tools/virsh.c:4697 tools/virsh.c:4734 tools/virsh.c:4792 msgid "pool name" msgstr "卷名称" #: tools/virsh.c:4538 msgid "name of the volume" msgstr "卷的名称" #: tools/virsh.c:4539 msgid "size of the vol with optional k,M,G,T suffix" msgstr "带 k、M、G、T 后缀的可选卷大小" #: tools/virsh.c:4540 msgid "initial allocation size with optional k,M,G,T suffix" msgstr "带 k、M、G、T 后缀的可选初始分配大小" #: tools/virsh.c:4541 msgid "file format type raw,bochs,qcow,qcow2,vmdk" msgstr "文件格式类型 raw、bochs、qcow、qcow2、vmdk" #: tools/virsh.c:4599 tools/virsh.c:4604 #, c-format msgid "Malformed size %s" msgstr "畸形的大小 %s" #: tools/virsh.c:4633 #, c-format msgid "Vol %s created\n" msgstr "创建卷 %s \n" #: tools/virsh.c:4637 #, c-format msgid "Failed to create vol %s" msgstr "创建卷 %s 失败" #: tools/virsh.c:4652 msgid "undefine an inactive pool" msgstr "取消定义一个不活跃的池" #: tools/virsh.c:4653 msgid "Undefine the configuration for an inactive pool." msgstr "取消定义一个不活跃池的配置。" #: tools/virsh.c:4676 #, c-format msgid "Pool %s has been undefined\n" msgstr "池 %s 已经被取消定义\n" #: tools/virsh.c:4678 #, c-format msgid "Failed to undefine pool %s" msgstr "取消定义池 %s 失败" #: tools/virsh.c:4691 msgid "convert a pool name to pool UUID" msgstr "把一个池名称转换为池 UUID" #: tools/virsh.c:4717 msgid "failed to get pool UUID" msgstr "获得池 UUID 失败" #: tools/virsh.c:4728 msgid "create a vol from an XML file" msgstr "从一个 XML 文件创建一个卷" #: tools/virsh.c:4735 tools/virsh.c:4793 msgid "file containing an XML vol description" msgstr "包含 XML 卷描述的文件" #: tools/virsh.c:4772 #, c-format msgid "Vol %s created from %s\n" msgstr "在 %s 中创建卷 %s\n" #: tools/virsh.c:4776 tools/virsh.c:4833 #, c-format msgid "Failed to create vol from %s" msgstr "在 %s 中创建卷失败" #: tools/virsh.c:4786 msgid "create a vol, using another volume as input" msgstr "" #: tools/virsh.c:4787 #, fuzzy msgid "Create a vol from an existing volume." msgstr "从一个 XML 文件创建一个卷" #: tools/virsh.c:4794 #, fuzzy msgid "pool name or uuid of the input volume's pool" msgstr "非活跃池的名称" #: tools/virsh.c:4795 #, fuzzy msgid "input vol name or key" msgstr "卷名称或者密钥" #: tools/virsh.c:4830 #, fuzzy, c-format msgid "Vol %s created from input vol %s\n" msgstr "在 %s 中创建卷 %s\n" #: tools/virsh.c:4885 #, fuzzy msgid "clone a volume." msgstr "卷的名称" #: tools/virsh.c:4886 msgid "Clone an existing volume." msgstr "" #: tools/virsh.c:4892 #, fuzzy msgid "orig vol name or key" msgstr "卷名称或者密钥" #: tools/virsh.c:4893 #, fuzzy msgid "clone name" msgstr "网络名" #: tools/virsh.c:4915 #, fuzzy msgid "failed to get parent pool" msgstr "启动池 %s 失败" #: tools/virsh.c:4936 #, fuzzy, c-format msgid "Vol %s cloned from %s\n" msgstr "在 %s 中创建卷 %s\n" #: tools/virsh.c:4939 #, fuzzy, c-format msgid "Failed to clone vol from %s" msgstr "在 %s 中创建卷失败" #: tools/virsh.c:4962 msgid "delete a vol" msgstr "删除卷" #: tools/virsh.c:4963 msgid "Delete a given vol." msgstr "删除一个给定的卷。" #: tools/virsh.c:4969 tools/virsh.c:5010 tools/virsh.c:5061 msgid "vol name, key or path" msgstr "卷名称、密钥或者路径" #: tools/virsh.c:4988 #, c-format msgid "Vol %s deleted\n" msgstr "卷 %s 被删除\n" #: tools/virsh.c:4990 #, c-format msgid "Failed to delete vol %s" msgstr "删除卷 %s 失败" #: tools/virsh.c:5003 msgid "storage vol information" msgstr "存储卷信息" #: tools/virsh.c:5004 msgid "Returns basic information about the storage vol." msgstr "返回关于这个存储卷的基本信息。" #: tools/virsh.c:5032 msgid "Type:" msgstr "类型：" #: tools/virsh.c:5034 msgid "file" msgstr "文件" #: tools/virsh.c:5034 msgid "block" msgstr "块" #: tools/virsh.c:5054 msgid "vol information in XML" msgstr "XML 中的卷信息" #: tools/virsh.c:5055 msgid "Output the vol information as an XML dump to stdout." msgstr "将卷信息作为一个 XML 转储输出到 stdout。" #: tools/virsh.c:5095 msgid "list vols" msgstr "列出卷" #: tools/virsh.c:5096 msgid "Returns list of vols by pool." msgstr "根据池返回卷列表" #: tools/virsh.c:5121 tools/virsh.c:5129 msgid "Failed to list active vols" msgstr "列出活跃的卷失败" #: tools/virsh.c:5137 msgid "Path" msgstr "路径" #: tools/virsh.c:5173 msgid "convert a vol UUID to vol name" msgstr "将卷 UUID 转换为卷名称" #: tools/virsh.c:5179 msgid "vol key or path" msgstr "卷密钥或者路径" #: tools/virsh.c:5206 msgid "convert a vol UUID to vol key" msgstr "将卷 UUID 转换为卷密钥" #: tools/virsh.c:5212 msgid "vol uuid" msgstr "卷 uuid" #: tools/virsh.c:5239 msgid "convert a vol UUID to vol path" msgstr "将卷 UUID 转换为卷路径" #: tools/virsh.c:5246 msgid "vol name or key" msgstr "卷名称或者密钥" #: tools/virsh.c:5271 #, fuzzy msgid "define or modify a secret from an XML file" msgstr "从一个 XML 文件定义(但不开始)一个网络" #: tools/virsh.c:5272 msgid "Define or modify a secret." msgstr "" #: tools/virsh.c:5277 msgid "file containing secret attributes in XML" msgstr "" #: tools/virsh.c:5302 #, fuzzy, c-format msgid "Failed to set attributes from %s" msgstr "无法设定 tty 属性：%s\n" #: tools/virsh.c:5306 #, fuzzy msgid "Failed to get UUID of created secret" msgstr "生成套接字失败" #: tools/virsh.c:5310 #, fuzzy, c-format msgid "Secret %s created\n" msgstr "创建卷 %s \n" #: tools/virsh.c:5319 msgid "secret attributes in XML" msgstr "" #: tools/virsh.c:5320 #, fuzzy msgid "Output attributes of a secret as an XML dump to stdout." msgstr "将节点设备详情作为 XML 转储到 stdout。" #: tools/virsh.c:5325 tools/virsh.c:5365 tools/virsh.c:5424 tools/virsh.c:5476 msgid "secret UUID" msgstr "" #: tools/virsh.c:5359 msgid "set a secret value" msgstr "" #: tools/virsh.c:5360 msgid "Set a secret value." msgstr "" #: tools/virsh.c:5366 msgid "base64-encoded secret value" msgstr "" #: tools/virsh.c:5390 #, fuzzy msgid "Invalid base64 data" msgstr "无效安全性类型 %s" #: tools/virsh.c:5394 tools/virsh.c:5453 tools/virsh.c:6504 tools/virsh.c:6773 msgid "Failed to allocate memory" msgstr "分配内存失败" #: tools/virsh.c:5403 #, fuzzy msgid "Failed to set secret value" msgstr "无法设置安全性标签" #: tools/virsh.c:5406 msgid "Secret value set\n" msgstr "" #: tools/virsh.c:5418 msgid "Output a secret value" msgstr "" #: tools/virsh.c:5419 msgid "Output a secret value to stdout." msgstr "" #: tools/virsh.c:5470 #, fuzzy msgid "undefine a secret" msgstr "取消定义一个不活跃的池" #: tools/virsh.c:5471 #, fuzzy msgid "Undefine a secret." msgstr "取消定义一个不活跃的池" #: tools/virsh.c:5495 #, fuzzy, c-format msgid "Failed to delete secret %s" msgstr "删除 veth 失败：%s" #: tools/virsh.c:5498 #, fuzzy, c-format msgid "Secret %s deleted\n" msgstr "卷 %s 被删除\n" #: tools/virsh.c:5510 #, fuzzy msgid "list secrets" msgstr "无效安全性类型 %s" #: tools/virsh.c:5511 #, fuzzy msgid "Returns a list of secrets" msgstr "返回网络列表" #: tools/virsh.c:5526 tools/virsh.c:5533 #, fuzzy msgid "Failed to list secrets" msgstr "列出节点设备失败" #: tools/virsh.c:5540 #, fuzzy msgid "UUID" msgstr "UUID:" #: tools/virsh.c:5540 msgid "Usage" msgstr "" #: tools/virsh.c:5554 msgid "Volume" msgstr "" #: tools/virsh.c:5564 #, fuzzy msgid "Unused" msgstr "暂停" #: tools/virsh.c:5578 msgid "show version" msgstr "显示版本" #: tools/virsh.c:5579 msgid "Display the system version information." msgstr "显示系统版本信息。" #: tools/virsh.c:5602 msgid "failed to get hypervisor type" msgstr "获得管理程序类型失败" #: tools/virsh.c:5611 #, c-format msgid "Compiled against library: libvir %d.%d.%d\n" msgstr "编译使用的库：libvir %d.%d.%d\n" #: tools/virsh.c:5616 msgid "failed to get the library version" msgstr "获得库函数信息失败" #: tools/virsh.c:5623 #, c-format msgid "Using library: libvir %d.%d.%d\n" msgstr "使用的库：libvir %d.%d.%d\n" #: tools/virsh.c:5630 #, c-format msgid "Using API: %s %d.%d.%d\n" msgstr "使用的 API: %s %d.%d.%d\n" #: tools/virsh.c:5635 msgid "failed to get the hypervisor version" msgstr "获得管理程序版本失败" #: tools/virsh.c:5640 #, c-format msgid "Cannot extract running %s hypervisor version\n" msgstr "无法提取运行的 %s管理程序版本\n" #: tools/virsh.c:5647 #, c-format msgid "Running hypervisor: %s %d.%d.%d\n" msgstr "运行管理程序: %s %d.%d.%d\n" #: tools/virsh.c:5657 msgid "enumerate devices on this host" msgstr "这台主机中中的枚举设备" #: tools/virsh.c:5663 msgid "list devices in a tree" msgstr "在某个树中列出设备" #: tools/virsh.c:5664 msgid "capability name" msgstr "能力名称" #: tools/virsh.c:5765 msgid "Failed to count node devices" msgstr "节点设备计数失败" #: tools/virsh.c:5775 msgid "Failed to list node devices" msgstr "列出节点设备失败" #: tools/virsh.c:5825 msgid "node device details in XML" msgstr "XML 中的节点设备详情" #: tools/virsh.c:5826 msgid "Output the node device details as an XML dump to stdout." msgstr "将节点设备详情作为 XML 转储到 stdout。" #: tools/virsh.c:5832 tools/virsh.c:5875 tools/virsh.c:5916 tools/virsh.c:5957 msgid "device key" msgstr "设备密钥" #: tools/virsh.c:5848 tools/virsh.c:5891 tools/virsh.c:5932 tools/virsh.c:5973 msgid "Could not find matching device" msgstr "无法找到匹配的设备" #: tools/virsh.c:5868 #, fuzzy msgid "dettach node device from its device driver" msgstr "分离节点设备及其设备驱动程序" #: tools/virsh.c:5869 #, fuzzy msgid "" "Dettach node device from its device driver before assigning to a domain." msgstr "在分配到某个域之前分离节点设备及其设备驱动程序。" #: tools/virsh.c:5896 #, c-format msgid "Device %s dettached\n" msgstr "分离设备 %s\n" #: tools/virsh.c:5898 #, c-format msgid "Failed to dettach device %s" msgstr "分离设备 %s 失败" #: tools/virsh.c:5909 #, fuzzy msgid "reattach node device to its device driver" msgstr "重新附加节点设备设备机器设备驱动程序" #: tools/virsh.c:5910 #, fuzzy msgid "Reattach node device to its device driver once released by the domain." msgstr "在分配到某个域之前分离节点设备及其设备驱动程序。" #: tools/virsh.c:5937 #, c-format msgid "Device %s re-attached\n" msgstr "重新附加设备 %s\n" #: tools/virsh.c:5939 #, c-format msgid "Failed to re-attach device %s" msgstr "重新附加设备 %s 失败" #: tools/virsh.c:5950 msgid "reset node device" msgstr "重置节点设备" #: tools/virsh.c:5951 msgid "Reset node device before or after assigning to a domain." msgstr "在分配到某个域之前或者之后重置节点设备。" #: tools/virsh.c:5978 #, c-format msgid "Device %s reset\n" msgstr "重置设备 %s\n" #: tools/virsh.c:5980 #, c-format msgid "Failed to reset device %s" msgstr "重置设备 %s 失败" #: tools/virsh.c:5991 msgid "print the hypervisor hostname" msgstr "打印管理程序主机名" #: tools/virsh.c:6006 msgid "failed to get hostname" msgstr "获得主机名失败" #: tools/virsh.c:6020 msgid "print the hypervisor canonical URI" msgstr "打印管理程序典型的URI" #: tools/virsh.c:6035 msgid "failed to get URI" msgstr "获得URI失败" #: tools/virsh.c:6049 msgid "vnc display" msgstr "vnc 显示" #: tools/virsh.c:6050 msgid "Output the IP address and port number for the VNC display." msgstr "为VNC 显示输出IP地址和端口号." #: tools/virsh.c:6124 msgid "tty console" msgstr "tty 控制台" #: tools/virsh.c:6125 msgid "Output the device for the TTY console." msgstr "为 TTY 控制台输出设备。" #: tools/virsh.c:6185 msgid "attach device from an XML file" msgstr "从一个XML文件附加装置" #: tools/virsh.c:6186 msgid "Attach device from an XML ." msgstr "从一个XML文件附加装置." #: tools/virsh.c:6192 tools/virsh.c:6250 msgid "XML file" msgstr "XML 文件" #: tools/virsh.c:6213 msgid "attach-device: Missing option" msgstr "attach-device：缺少 选项" #: tools/virsh.c:6227 #, c-format msgid "Failed to attach device from %s" msgstr "从 %s 获得设备失败" #: tools/virsh.c:6231 msgid "Device attached successfully\n" msgstr "成功附加设备\n" #: tools/virsh.c:6243 msgid "detach device from an XML file" msgstr "从一个 XML 文件分离设备" #: tools/virsh.c:6244 msgid "Detach device from an XML " msgstr "从一个 XML 文件分离设备" #: tools/virsh.c:6271 msgid "detach-device: Missing option" msgstr "detach-device：缺少 选项" #: tools/virsh.c:6285 #, c-format msgid "Failed to detach device from %s" msgstr "为域 %s 分离设备失败" #: tools/virsh.c:6289 msgid "Device detached successfully\n" msgstr "成功分离设备\n" #: tools/virsh.c:6301 msgid "attach network interface" msgstr "获得网络界面" #: tools/virsh.c:6302 msgid "Attach new network interface." msgstr "附加新网络界面." #: tools/virsh.c:6308 tools/virsh.c:6424 msgid "network interface type" msgstr "网络界面类型" #: tools/virsh.c:6309 msgid "source of network interface" msgstr "网络界面源" #: tools/virsh.c:6310 msgid "target network name" msgstr "目标网络名称" #: tools/virsh.c:6311 tools/virsh.c:6425 msgid "MAC address" msgstr "MAC 地址" #: tools/virsh.c:6312 msgid "script used to bridge network interface" msgstr "构建网络界面用脚本" #: tools/virsh.c:6344 #, c-format msgid "No support %s in command 'attach-interface'" msgstr "%s在'attach-interface'命令中不支持" #: tools/virsh.c:6400 msgid "Interface attached successfully\n" msgstr "成功附加接口\n" #: tools/virsh.c:6417 msgid "detach network interface" msgstr "分离网络界面" #: tools/virsh.c:6418 msgid "Detach network interface." msgstr "分离网络界面。" #: tools/virsh.c:6463 tools/virsh.c:6468 msgid "Failed to get interface information" msgstr "获得界面信息失败" #: tools/virsh.c:6476 #, c-format msgid "No found interface whose type is %s" msgstr "未找到类型为%s的界面" #: tools/virsh.c:6498 #, c-format msgid "No found interface whose MAC address is %s" msgstr "未找到MAC地址为%s的界面" #: tools/virsh.c:6509 tools/virsh.c:6778 msgid "Failed to create XML" msgstr "创建XML失败" #: tools/virsh.c:6517 msgid "Interface detached successfully\n" msgstr "成功分离接口\n" #: tools/virsh.c:6537 msgid "attach disk device" msgstr "附加磁盘设备" #: tools/virsh.c:6538 msgid "Attach new disk device." msgstr "附加新磁盘设备." #: tools/virsh.c:6544 msgid "source of disk device" msgstr "磁盘设备源" #: tools/virsh.c:6545 tools/virsh.c:6701 msgid "target of disk device" msgstr "磁盘设备目标" #: tools/virsh.c:6546 msgid "driver of disk device" msgstr "磁盘设备驱动" #: tools/virsh.c:6547 msgid "subdriver of disk device" msgstr "磁盘设备副驱动" #: tools/virsh.c:6548 msgid "target device type" msgstr "目标设备类型" #: tools/virsh.c:6549 msgid "mode of device reading and writing" msgstr "设备读写模式" #: tools/virsh.c:6582 tools/virsh.c:6589 #, c-format msgid "No support %s in command 'attach-disk'" msgstr "%s在'attach-disk'命令中不支持" #: tools/virsh.c:6678 msgid "Disk attached successfully\n" msgstr "成功附加磁盘\n" #: tools/virsh.c:6694 msgid "detach disk device" msgstr "分离磁盘设备" #: tools/virsh.c:6695 msgid "Detach disk device." msgstr "分离磁盘设备。" #: tools/virsh.c:6736 tools/virsh.c:6741 tools/virsh.c:6748 msgid "Failed to get disk information" msgstr "获得磁盘信息失败" #: tools/virsh.c:6767 #, c-format msgid "No found disk whose target is %s" msgstr "目标为 %s的磁盘未找到" #: tools/virsh.c:6786 msgid "Disk detached successfully\n" msgstr "成功分离磁盘\n" #: tools/virsh.c:6812 #, c-format msgid "malloc: failed to allocate temporary file name: %s" msgstr "malloc：分配临时文件名失败：%s " #: tools/virsh.c:6822 #, c-format msgid "mkstemp: failed to create temporary file: %s" msgstr "mkstemp：创建临时文件失败：%s" #: tools/virsh.c:6828 #, c-format msgid "write: %s: failed to write to temporary file: %s" msgstr "写入：%s：写入临时文件失败：%s" #: tools/virsh.c:6836 #, c-format msgid "close: %s: failed to write or close temporary file: %s" msgstr "关闭：%s：写入或者关闭临时文件失败：%s" #: tools/virsh.c:6866 #, c-format msgid "" "%s: $EDITOR environment variable contains shell meta or other unacceptable " "characters" msgstr "%s：$EDITOR 环境变量包含 shell 元数据或者其它不能接受的字符" #: tools/virsh.c:6874 #, c-format msgid "" "%s: temporary filename contains shell meta or other unacceptable characters " "(is $TMPDIR wrong?)" msgstr "" "%s：临时文件名包含 shell 元数据或者其它不能接受的字符（$TMPDIR 错了吗？）" #: tools/virsh.c:6882 #, c-format msgid "virAsprintf: could not create editing command: %s" msgstr "virAsprintf：无法生成编辑命令：%s" #: tools/virsh.c:6890 #, c-format msgid "%s: edit command failed: %s" msgstr "%s：编辑命令失败：%s" #: tools/virsh.c:6896 #, c-format msgid "%s: command exited with non-zero status" msgstr "%s：命令以非零状态退出" #: tools/virsh.c:6911 #, c-format msgid "%s: failed to read temporary file: %s" msgstr "%s：读取临时文件失败：%s" #: tools/virsh.c:6924 #, fuzzy msgid "change the current directory" msgstr "无法获得当前目录" #: tools/virsh.c:6925 #, fuzzy msgid "Change the current directory." msgstr "无法获得当前目录" #: tools/virsh.c:6930 msgid "directory to switch to (default: home or else root)" msgstr "" #: tools/virsh.c:6941 msgid "cd: command valid only in interactive mode" msgstr "" #: tools/virsh.c:6954 #, c-format msgid "cd: %s: %s" msgstr "" #: tools/virsh.c:6968 #, fuzzy msgid "print the current directory" msgstr "无法获得当前目录" #: tools/virsh.c:6969 #, fuzzy msgid "Print the current directory." msgstr "无法获得当前目录" #: tools/virsh.c:6992 #, fuzzy, c-format msgid "pwd: cannot get current directory: %s" msgstr "无法获得当前目录" #: tools/virsh.c:6995 #, c-format msgid "%s\n" msgstr "" #: tools/virsh.c:7006 msgid "edit XML configuration for a domain" msgstr "编辑某个域的 XML 配置" #: tools/virsh.c:7007 msgid "Edit the XML configuration for a domain." msgstr "编辑某个域的 XML 配置。" #: tools/virsh.c:7058 #, c-format msgid "Domain %s XML configuration not changed.\n" msgstr "没有更改域 %s XML 配置。\n" #: tools/virsh.c:7084 #, c-format msgid "Domain %s XML configuration edited.\n" msgstr "编辑了域 %s XML 配置。\n" #: tools/virsh.c:7109 msgid "edit XML configuration for a network" msgstr "为网络编辑 XML 配置" #: tools/virsh.c:7110 msgid "Edit the XML configuration for a network." msgstr "为网络编辑 XML 配置。" #: tools/virsh.c:7126 msgid "edit XML configuration for a storage pool" msgstr "为存储池编辑 XML 配置" #: tools/virsh.c:7127 msgid "Edit the XML configuration for a storage pool." msgstr "为存储池编辑 XML 配置。" #: tools/virsh.c:7143 msgid "quit this interactive terminal" msgstr "退出这个非交互式终端" #: tools/virsh.c:7361 #, c-format msgid "command '%s' requires <%s> option" msgstr "命令 '%s' 需要 <%s> 选项" #: tools/virsh.c:7362 #, c-format msgid "command '%s' requires --%s option" msgstr "命令 '%s' 需要 --%s 选项" #: tools/virsh.c:7389 #, c-format msgid "command '%s' doesn't exist" msgstr "命令 '%s' 不存在" #: tools/virsh.c:7396 msgid " NAME\n" msgstr " NAME\n" #: tools/virsh.c:7399 msgid "" "\n" " SYNOPSIS\n" msgstr "" "\n" " SYNOPSIS\n" #: tools/virsh.c:7408 #, c-format msgid "[--%s ]" msgstr "[--%s ]" #: tools/virsh.c:7410 #, c-format msgid "[--%s ]" msgstr "[--%s ]" #: tools/virsh.c:7423 msgid "" "\n" " DESCRIPTION\n" msgstr "" "\n" " DESCRIPTION\n" #: tools/virsh.c:7429 msgid "" "\n" " OPTIONS\n" msgstr "" "\n" " OPTIONS\n" #: tools/virsh.c:7434 #, c-format msgid "--%s " msgstr "--%s " #: tools/virsh.c:7436 #, c-format msgid "--%s " msgstr "--%s " #: tools/virsh.c:7588 #, c-format msgid "internal error: virsh %s: no %s VSH_OT_DATA option" msgstr "内部错误：virsh %s：没有 %s VSH_OT_DATA 选项" #: tools/virsh.c:7605 msgid "undefined domain name or id" msgstr "取消定义域名或 id" #: tools/virsh.c:7637 #, c-format msgid "failed to get domain '%s'" msgstr "获得域 '%s' 失败" #: tools/virsh.c:7653 msgid "undefined network name" msgstr "未指定网络名称" #: tools/virsh.c:7677 #, c-format msgid "failed to get network '%s'" msgstr "获得网络 '%s' 失败" #: tools/virsh.c:7693 #, fuzzy msgid "undefined interface identifier" msgstr "取消定义一个非活跃的网络" #: tools/virsh.c:7717 #, fuzzy, c-format msgid "failed to get interface '%s'" msgstr "获得网络 '%s' 失败" #: tools/virsh.c:7730 tools/virsh.c:7776 msgid "undefined pool name" msgstr "未定义池名称" #: tools/virsh.c:7754 #, c-format msgid "failed to get pool '%s'" msgstr "获得池 '%s' 失败" #: tools/virsh.c:7771 msgid "undefined vol name" msgstr "未定义卷名称" #: tools/virsh.c:7807 #, c-format msgid "failed to get vol '%s'" msgstr "获得卷 '%s' 失败" #: tools/virsh.c:7827 #, fuzzy msgid "undefined secret UUID" msgstr "无法设置 UUID" #: tools/virsh.c:7839 #, fuzzy, c-format msgid "failed to get secret '%s'" msgstr "获得网络 '%s' 失败" #: tools/virsh.c:7870 #, c-format msgid "" "\n" "(Time: %.3f ms)\n" "\n" msgstr "" "\n" "(Time: %.3f ms)\n" "\n" #: tools/virsh.c:7944 msgid "missing \"" msgstr "缺少 \"" #: tools/virsh.c:8005 #, c-format msgid "unexpected token (command name): '%s'" msgstr "不期望的令牌（命令名）：'%s'" #: tools/virsh.c:8010 #, c-format msgid "unknown command: '%s'" msgstr "未知的命令：'%s'" #: tools/virsh.c:8017 #, c-format msgid "command '%s' doesn't support option --%s" msgstr "命令 '%s' 不支持选项 --%s" #: tools/virsh.c:8032 #, c-format msgid "expected syntax: --%s <%s>" msgstr "期望的使用方法：--%s <%s>" #: tools/virsh.c:8035 msgid "number" msgstr "数字" #: tools/virsh.c:8035 msgid "string" msgstr "字符串" #: tools/virsh.c:8041 #, c-format msgid "unexpected data '%s'" msgstr "非期望的数据 '%s'" #: tools/virsh.c:8063 msgid "OPTION" msgstr "选项" #: tools/virsh.c:8063 msgid "DATA" msgstr "数据" #: tools/virsh.c:8114 tools/virsh.c:8136 msgid "idle" msgstr "闲置" #: tools/virsh.c:8116 msgid "paused" msgstr "暂停" #: tools/virsh.c:8118 msgid "in shutdown" msgstr "关闭" #: tools/virsh.c:8120 msgid "shut off" msgstr "关闭" #: tools/virsh.c:8122 msgid "crashed" msgstr "崩溃" #: tools/virsh.c:8134 msgid "offline" msgstr "离线" #: tools/virsh.c:8153 msgid "no valid connection" msgstr "无效的连接" #: tools/virsh.c:8199 msgid "error: " msgstr "错误：" #: tools/virsh.c:8215 tools/virsh.c:8227 tools/virsh.c:8240 #, c-format msgid "%s: %d: failed to allocate %d bytes" msgstr "%s: %d: 分配 %d 字节失败" #: tools/virsh.c:8254 #, c-format msgid "%s: %d: failed to allocate %lu bytes" msgstr "%s: %d: 分配 %lu字节失败" #: tools/virsh.c:8284 msgid "failed to connect to the hypervisor" msgstr "连接到管理程序失败" #: tools/virsh.c:8316 msgid "failed to get the log file information" msgstr "获得日志文件信息失败" #: tools/virsh.c:8321 msgid "the log path is not a file" msgstr "日志路径不是一个文件" #: tools/virsh.c:8329 msgid "failed to open the log file. check the log file path" msgstr "打开日志文件失败,检查日志文件路径" #: tools/virsh.c:8398 msgid "failed to write the log file" msgstr "写入日志文件失败" #: tools/virsh.c:8413 #, c-format msgid "%s: failed to write log file: %s" msgstr "%s：写入日志文件失败：%s" #: tools/virsh.c:8591 msgid "failed to disconnect from the hypervisor" msgstr "与管理程序断开连接失败" #: tools/virsh.c:8606 #, c-format msgid "" "\n" "%s [options] [commands]\n" "\n" " options:\n" " -c | --connect hypervisor connection URI\n" " -r | --readonly connect readonly\n" " -d | --debug debug level [0-5]\n" " -h | --help this help\n" " -q | --quiet quiet mode\n" " -t | --timing print timing information\n" " -l | --log output logging to file\n" " -v | --version program version\n" "\n" " commands (non interactive mode):\n" msgstr "" "\n" "%s [options] [commands]\n" "\n" " options:\n" " -c | --connect hypervisor 连接 URI\n" " -r | --readonly 只读连接\n" " -d | --debug debug 级别 [0-5]\n" " -h | --help 帮助\n" " -q | --quiet 安静模式\n" " -t | --timing 输出时间信息\n" " -l | --log 输出日志到文件\n" " -v | --version 程序版本\n" "\n" " commands (non interactive mode):\n" #: tools/virsh.c:8624 msgid "" "\n" " (specify help for details about the command)\n" "\n" msgstr "" "\n" " (使用 --help 来获得这个命令的详细信息)\n" "\n" #: tools/virsh.c:8716 #, c-format msgid "unsupported option '-%c'. See --help." msgstr "不支持选项 '-%c'。参阅 --help。" #: tools/virsh.c:8723 #, c-format msgid "extra argument '%s'. See --help." msgstr "提取参数 '%s'。请看 --help。" #: tools/virsh.c:8807 #, c-format msgid "" "Welcome to %s, the virtualization interactive terminal.\n" "\n" msgstr "" "欢迎使用 %s，虚拟化的交互式终端。\n" "\n" #: tools/virsh.c:8810 msgid "" "Type: 'help' for help with commands\n" " 'quit' to quit\n" "\n" msgstr "" "输入：'help' 来获得命令的帮助信息\n" " 'quit' 退出\n" "\n" #, fuzzy #~ msgid "Invalid compress format %d" #~ msgstr "无效的 vport 操作 (%d)" #~ msgid "migrate operation failed" #~ msgstr "迁移操作失败" #, fuzzy #~ msgid "suspending before dump failed" #~ msgstr "挂起操作失败" #~ msgid "could not change cdrom media" #~ msgstr "无法更改光盘介质" #~ msgid "changing cdrom media failed: %s" #~ msgstr "更改光盘介质失败：%s" #~ msgid "cannot attach usb disk" #~ msgstr "无法附加 usb 磁盘" #~ msgid "adding usb disk failed" #~ msgstr "添加 usb 磁盘失败" #, fuzzy #~ msgid "failed to add network backend with '%s'" #~ msgstr "获得网络 '%s' 失败" #~ msgid "failed to execute detach disk %s command" #~ msgstr "执行分离磁盘 %s 命令失败" #, fuzzy #~ msgid "failed to detach disk %s: invalid PCI address %.4x:%.2x:%.2x: %s" #~ msgstr "分离磁盘 %s 失败：无效插槽 %d" #, fuzzy #~ msgid "cannot detach host pci device" #~ msgstr "无法提取主机设备" #~ msgid "device not found: %s (%s)" #~ msgstr "未找到设备：%s（%s）" #~ msgid "'memsave' command failed" #~ msgstr "'memsave' 命令失败" #~ msgid "off-line migration specified, but suspend operation failed" #~ msgstr "指定离线迁移，但挂起操作失败" #~ msgid "unexpected sound model %s" #~ msgstr "意外的声音模式 %s" #, fuzzy #~ msgid "Unknown compressed save format %d" #~ msgstr "未知卷格式号 %d" #~ msgid "%s: error calling getpidcon(): %s" #~ msgstr "%s：调用 getpidcon() 出错：%s"