# German translation of libvirt # Copyright (C) 2006, 2007 Free Software Foundation, Inc. # This file is distributed under the same license as the libvirt package. # # Timo Trinks , 2007. # Michael Schönitzer , 2007. # Robert Scheck , 2007. # Fabian Affolter , 2008-2009. # msgid "" msgstr "" "Project-Id-Version: de\n" "Report-Msgid-Bugs-To: libvir-list@redhat.com\n" "POT-Creation-Date: 2009-09-08 15:55+0200\n" "PO-Revision-Date: 2009-04-17 15:17+0100\n" "Last-Translator: Fabian Affolter \n" "Language-Team: German \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Poedit-Language: German\n" #: qemud/dispatch.c:346 #, c-format msgid "program mismatch (actual %x, expected %x)" msgstr "" #: qemud/dispatch.c:352 #, c-format msgid "version mismatch (actual %x, expected %x)" msgstr "" #: qemud/dispatch.c:362 #, fuzzy, c-format msgid "type (%d) != REMOTE_CALL" msgstr "Richtung (%d) != REMOTE_CALL" #: qemud/dispatch.c:402 #, c-format msgid "status (%d) != REMOTE_OK" msgstr "Status (%d) != REMOTE_OK" #: qemud/dispatch.c:420 msgid "authentication required" msgstr "Authentifikation benötigt" #: qemud/dispatch.c:428 #, c-format msgid "unknown procedure: %d" msgstr "unbekannte Prozedur: %d" #: qemud/dispatch.c:440 msgid "parse args failed" msgstr "Parsen der Argumente fehlgeschlagen" #: qemud/qemud.c:241 #, fuzzy, c-format msgid "Cannot access %s '%s': %s" msgstr "Prüfen Sie Ihren Zugang" #: qemud/qemud.c:258 #, c-format msgid "gnutls_certificate_allocate_credentials: %s" msgstr "gnutls_certificate_allocate_credentials: %s" #: qemud/qemud.c:271 #, c-format msgid "gnutls_certificate_set_x509_trust_file: %s" msgstr "gnutls_certificate_set_x509_trust_file: %s" #: qemud/qemud.c:285 #, c-format msgid "gnutls_certificate_set_x509_crl_file: %s" msgstr "gnutls_certificate_set_x509_crl_file: %s" #: qemud/qemud.c:302 #, c-format msgid "gnutls_certificate_set_x509_key_file: %s" msgstr "gnutls_certificate_set_x509_key_file: %s" #: qemud/qemud.c:315 #, c-format msgid "gnutls_dh_params_init: %s" msgstr "gnutls_dh_params_init: %s" #: qemud/qemud.c:320 #, c-format msgid "gnutls_dh_params_generate2: %s" msgstr "gnutls_dh_params_generate2: %s" #: qemud/qemud.c:342 #, c-format msgid "Failed to read from signal pipe: %s" msgstr "Lesen von der Signal-Pipe fehlgeschlagen: %s" #: qemud/qemud.c:352 #, fuzzy msgid "Reloading configuration on SIGHUP" msgstr "Fehler beim Lesen der PAM-Dienst Konfiguration.\n" #: qemud/qemud.c:354 msgid "Error while reloading drivers" msgstr "Fehler während des Neuladen der Treiber" #: qemud/qemud.c:360 #, c-format msgid "Shutting down on signal %d" msgstr "Fahre herunten nach Signal %d" #: qemud/qemud.c:365 #, fuzzy, c-format msgid "Received unexpected signal %d" msgstr "Unerwarteter Fehlerist aufgetreten" #: qemud/qemud.c:451 #, c-format msgid "Failed to open pid file '%s' : %s" msgstr "Öffnen der PID-Datei fehlgeschlagen '%s' : %s" #: qemud/qemud.c:457 #, c-format msgid "Failed to fdopen pid file '%s' : %s" msgstr "Öffnen der PID-Datei (fdopen) fehlgeschlagen '%s' : %s" #: qemud/qemud.c:464 #, c-format msgid "Failed to write to pid file '%s' : %s" msgstr "Schreiben in die PID-Datei fehlgeschlagen '%s' : %s" #: qemud/qemud.c:471 #, c-format msgid "Failed to close pid file '%s' : %s" msgstr "Schliessen der PID-Datei fehlgeschlagen '%s' : %s" #: qemud/qemud.c:488 #, fuzzy msgid "Failed to allocate memory for struct qemud_socket" msgstr "Speicherzuweisung gescheitert" #: qemud/qemud.c:498 #, c-format msgid "Failed to create socket: %s" msgstr "Erzeugen des Socket fehlgeschlagen: %s" #: qemud/qemud.c:520 #, fuzzy, c-format msgid "Failed to bind socket to '%s': %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: qemud/qemud.c:529 #, fuzzy, c-format msgid "Failed to listen for connections on '%s': %s" msgstr "Öffnen von '%s' schlug fehl: %s" #: qemud/qemud.c:540 qemud/qemud.c:681 msgid "Failed to add server event callback" msgstr "Hinzufügen von Server-Event-Callback fehlgeschlagen" #: qemud/qemud.c:569 #, c-format msgid "getaddrinfo: %s\n" msgstr "getaddrinfo: %s\n" #: qemud/qemud.c:579 #, c-format msgid "socket: %s" msgstr "Socket: %s" #: qemud/qemud.c:588 #, fuzzy, c-format msgid "bind: %s" msgstr "bind: %s" #: qemud/qemud.c:595 #, c-format msgid "listen: %s" msgstr "Horchen: %s" #: qemud/qemud.c:639 #, c-format msgid "remoteListenTCP: calloc: %s" msgstr "remoteListenTCP: calloc: %s" #: qemud/qemud.c:670 #, c-format msgid "remoteListenTCP: listen: %s" msgstr "remoteListenTCP: listen: %s" #: qemud/qemud.c:764 msgid "Resulting path too long for buffer in qemudInitPaths()" msgstr "Resultierender Pfad zu lang für Buffer in qemudInitPaths()" #: qemud/qemud.c:776 #, fuzzy msgid "Failed to allocate struct qemud_server" msgstr "Speicherzuweisung gescheitert" #: qemud/qemud.c:781 qemud/qemud.c:1268 src/domain_conf.c:560 #: src/interface_conf.c:1224 src/network_conf.c:170 src/node_device_conf.c:164 #: src/openvz_conf.c:453 src/qemu_driver.c:459 src/remote_internal.c:936 #: src/remote_internal.c:6659 src/storage_conf.c:1384 src/test.c:310 #: src/test.c:530 #, fuzzy msgid "cannot initialize mutex" msgstr "Kann OLE nicht initialisieren" #: qemud/qemud.c:785 #, fuzzy msgid "cannot initialize condition variable" msgstr "Kann SciTech MGL nicht initialisieren !" #: qemud/qemud.c:794 #, fuzzy msgid "Failed to initialize event system" msgstr "Versuch, örtliche Systemzeit zu bekommen, gescheitert." #: qemud/qemud.c:886 #, fuzzy, c-format msgid "Failed to initialize SASL authentication %s" msgstr "Konnte MS HTML-Hilfe nicht initialisieren." #: qemud/qemud.c:904 #, fuzzy, c-format msgid "Failed to connect to system bus for PolicyKit auth: %s" msgstr "Verbindungsaufbau zum Hypervisor schlug fehl" #: qemud/qemud.c:1016 #, c-format msgid "remoteInitializeTLSSession: %s" msgstr "remoteInitializeTLSSession: %s" #: qemud/qemud.c:1032 #, c-format msgid "remoteCheckDN: gnutls_x509_cert_get_dn: %s" msgstr "remoteCheckDN: gnutls_x509_cert_get_dn: %s" #: qemud/qemud.c:1049 #, c-format msgid "remoteCheckDN: failed: client DN is %s" msgstr "remoteCheckDN: fehlgeschlagen: Client-DN ist %s" #: qemud/qemud.c:1064 #, c-format msgid "remoteCheckCertificate: verify failed: %s" msgstr "remoteCheckCertificate: überprüfen fehlgeschlagen: %s" #: qemud/qemud.c:1071 msgid "remoteCheckCertificate: the client certificate is not trusted." msgstr "remoteCheckCertificate: Das Client-Zertifikat ist nicht trusted." #: qemud/qemud.c:1075 msgid "remoteCheckCertificate: the client certificate has unknown issuer." msgstr "" "remoteCheckCertificate: Das Client-Zertifikat hat einen unbekannten " "Herausgeber." #: qemud/qemud.c:1079 msgid "remoteCheckCertificate: the client certificate has been revoked." msgstr "remoteCheckCertificate: Das Client-Zertifikat wurde zurückgezogen." #: qemud/qemud.c:1084 msgid "" "remoteCheckCertificate: the client certificate uses an insecure algorithm." msgstr "" "remoteCheckCertificate: Das Client-Zertifikat benutzt einen unsicheren " "Algorithmus." #: qemud/qemud.c:1092 msgid "remoteCheckCertificate: certificate is not X.509" msgstr "remoteCheckCertificate: Zertifikat ist nicht X.509" #: qemud/qemud.c:1097 msgid "remoteCheckCertificate: no peers" msgstr "remoteCheckCertificate: Keine Peers" #: qemud/qemud.c:1107 msgid "remoteCheckCertificate: gnutls_x509_crt_init failed" msgstr "remoteCheckCertificate: gnutls_x509_crt_init fehlgeschlagen" #: qemud/qemud.c:1117 msgid "remoteCheckCertificate: the client certificate has expired" msgstr "remoteCheckCertificate: Das Client-Zertifikat ist abgelaufen" #: qemud/qemud.c:1124 msgid "remoteCheckCertificate: the client certificate is not yet activated" msgstr "" "remoteCheckCertificate: Das Client-Zertifikat wurde noch nicht aktiviert" #: qemud/qemud.c:1133 msgid "" "remoteCheckCertificate: client's Distinguished Name is not on the list of " "allowed clients (tls_allowed_dn_list). Use 'openssl x509 -in clientcert.pem " "-text' to view the Distinguished Name field in the client certificate, or " "run this daemon with --verbose option." msgstr "" #: qemud/qemud.c:1151 msgid "remoteCheckCertificate: failed to verify client's certificate" msgstr "" "remoteCheckCertificate:Überprüfung des Client-Zertifikat fehlgeschlagen" #: qemud/qemud.c:1154 msgid "" "remoteCheckCertificate: tls_no_verify_certificate is set so the bad " "certificate is ignored" msgstr "" #: qemud/qemud.c:1160 msgid "client had unexpected data pending tx after access check" msgstr "" #: qemud/qemud.c:1188 #, fuzzy, c-format msgid "Failed to verify client credentials: %s" msgstr "" "Der Versuch eines Clients, eine Verbindung herzustellen, ist gescheitert." #: qemud/qemud.c:1215 #, c-format msgid "Failed to accept connection: %s" msgstr "Verbindung akzeptieren fehlgeschalgen: %s" #: qemud/qemud.c:1221 #, c-format msgid "Too many active clients (%d), dropping connection" msgstr "" #: qemud/qemud.c:1227 #, fuzzy msgid "Out of memory allocating clients" msgstr "Speicherzuweisung ändern" #: qemud/qemud.c:1301 #, c-format msgid "Turn off polkit auth for privileged client %d" msgstr "Schalten PolicyKit-Authentifizierung für privilegierten Client %d aus " #: qemud/qemud.c:1340 qemud/qemud.c:1954 #, c-format msgid "TLS handshake failed: %s" msgstr "TLS-Handshake fehlgeschalgen: %s" #: qemud/qemud.c:1519 qemud/qemud.c:1764 #, c-format msgid "unexpected negative length request %lld" msgstr "" #: qemud/qemud.c:1535 #, c-format msgid "read: %s" msgstr "lese: %s" #: qemud/qemud.c:1548 #, c-format msgid "gnutls_record_recv: %s" msgstr "gnutls_record_recv: %s" #: qemud/qemud.c:1610 #, fuzzy, c-format msgid "failed to decode SASL data %s" msgstr "Konnte Daten nicht von der Zwischenablage holen." #: qemud/qemud.c:1775 #, c-format msgid "write: %s" msgstr "schreibe: %s" #: qemud/qemud.c:1786 #, c-format msgid "gnutls_record_send: %s" msgstr "gnutls_record_send: %s" #: qemud/qemud.c:1835 #, fuzzy, c-format msgid "failed to encode SASL data %s" msgstr "Konnte Daten nicht von der Zwischenablage holen." #: qemud/qemud.c:2102 #, c-format msgid "Signal handler reported %d errors: last error: %s" msgstr "" #: qemud/qemud.c:2157 #, fuzzy msgid "Failed to register shutdown timeout" msgstr "Versuch, DDE-Server '%s' zu registrieren, gescheitert" #: qemud/qemud.c:2166 #, fuzzy msgid "Failed to allocate workers" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: qemud/qemud.c:2327 qemud/qemud.c:2346 #, fuzzy, c-format msgid "failed to allocate memory for %s config list" msgstr "Speicherzuweisung gescheitert" #: qemud/qemud.c:2333 qemud/qemud.c:2363 #, fuzzy, c-format msgid "failed to allocate memory for %s config list value" msgstr "Speicherzuweisung gescheitert" #: qemud/qemud.c:2351 qemud/qemud.c:2374 #, c-format msgid "remoteReadConfigFile: %s: %s: must be a string or list of strings\n" msgstr "" "remoteReadConfigFile: %s: %s: muss ein String oder eine Liste von Strings " "sein\n" #: qemud/qemud.c:2390 #, c-format msgid "remoteReadConfigFile: %s: %s: invalid type: got %s; expected %s\n" msgstr "" "remoteReadConfigFile: %s: %s: ungültiger Typ: erhielt %s; erwartete %s\n" #: qemud/qemud.c:2412 #, c-format msgid "remoteReadConfigFile: %s\n" msgstr "remoteReadConfigFile: %s\n" #: qemud/qemud.c:2455 #, c-format msgid "remoteReadConfigFile: %s: %s: unsupported auth %s\n" msgstr "" "remoteReadConfigFile: %s: %s: nicht unterstützte Authentifizierung %s\n" #: qemud/qemud.c:2624 msgid "Cannot set group when not running as root" msgstr "Kann Gruppe nicht setzen, wenn nicht als root ausgeführt" #: qemud/qemud.c:2634 #, fuzzy msgid "Failed to allocate memory for buffer" msgstr "Speicherzuweisung gescheitert" #: qemud/qemud.c:2643 #, fuzzy msgid "Failed to reallocate enough memory for buffer" msgstr "Speicherzuweisung gescheitert" #: qemud/qemud.c:2649 #, fuzzy, c-format msgid "Failed to lookup group '%s'" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: qemud/qemud.c:2662 qemud/qemud.c:2672 #, fuzzy, c-format msgid "Failed to parse mode '%s'" msgstr "Änderung des Video-Modus gescheitert" #: qemud/qemud.c:2750 msgid "additional privileges are required\n" msgstr "" #: qemud/qemud.c:2756 #, fuzzy msgid "failed to set reduced privileges\n" msgstr "NAT für das physikalische Gerät %s" #: qemud/qemud.c:2905 #, fuzzy, c-format msgid "Failed to fork as daemon: %s" msgstr "Abspalten des Kindprozesses fehlgeschlagen (%s)" #: qemud/qemud.c:2928 #, fuzzy, c-format msgid "Failed to create pipe: %s" msgstr "Konnte keine anonyme Unix-Pipe erstellen" #: qemud/qemud.c:2953 #, fuzzy msgid "unable to create rundir" msgstr "Cursor konnte nicht erzeugt werden" #: qemud/qemud.c:2980 #, fuzzy, c-format msgid "Failed to change group ownership of %s" msgstr "Änderung des Video-Modus gescheitert" #: qemud/qemud.c:2988 msgid "Failed to register callback for signal pipe" msgstr "" #: qemud/remote.c:140 #, fuzzy msgid "connection already open" msgstr "Katalogvorlage öffnen" #: qemud/remote.c:171 msgid "connection not open" msgstr "Verbindung nicht offen" #: qemud/remote.c:229 #, fuzzy msgid "out of memory in strdup" msgstr "Zeige Zusammenfassung der Speicher-Auslastung" #: qemud/remote.c:375 msgid "maxCells > REMOTE_NODE_MAX_CELLS" msgstr "maxCells > REMOTE_NODE_MAX_CELLS" #: qemud/remote.c:466 qemud/remote.c:549 msgid "nparams too large" msgstr "nparams zu lang" #: qemud/remote.c:515 msgid "unknown type" msgstr "unbekannter Typ" #: qemud/remote.c:697 qemud/remote.c:747 msgid "size > maximum buffer size" msgstr "Grösse > Maximale Buffer-Grösse" #: qemud/remote.c:1214 msgid "maxinfo > REMOTE_VCPUINFO_MAX" msgstr "maxinfo > REMOTE_VCPUINFO_MAX" #: qemud/remote.c:1220 msgid "maxinfo * maplen > REMOTE_CPUMAPS_MAX" msgstr "maxinfo * maplen > REMOTE_CPUMAPS_MAX" #: qemud/remote.c:1463 msgid "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" msgstr "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" #: qemud/remote.c:1585 msgid "cpumap_len > REMOTE_CPUMAP_MAX" msgstr "cpumap_len > REMOTE_CPUMAP_MAX" #: qemud/remote.c:1904 qemud/remote.c:1969 qemud/remote.c:3328 msgid "maxnames > REMOTE_NETWORK_NAME_LIST_MAX" msgstr "maxnames > REMOTE_NETWORK_NAME_LIST_MAX" #: qemud/remote.c:1937 msgid "maxids > REMOTE_DOMAIN_ID_LIST_MAX" msgstr "maxids > REMOTE_DOMAIN_ID_LIST_MAX" #: qemud/remote.c:2339 #, fuzzy msgid "maxnames > REMOTE_INTERFACE_NAME_LIST_MAX" msgstr "maxnames > REMOTE_NETWORK_NAME_LIST_MAX" #: qemud/remote.c:2390 #, fuzzy msgid "maxnames > REMOTE_DEFINED_INTERFACE_NAME_LIST_MAX" msgstr "maxnames > REMOTE_NETWORK_NAME_LIST_MAX" #: qemud/remote.c:2617 src/remote_internal.c:5668 #, c-format msgid "Cannot resolve address %d: %s" msgstr "Kann Adresse nicht auflösen %d: %s" #: qemud/remote.c:2659 msgid "client tried invalid SASL init request" msgstr "" #: qemud/remote.c:2668 #, fuzzy, c-format msgid "failed to get sock address: %s" msgstr "Konnte ISP Namen '%s' nicht ermitteln" #: qemud/remote.c:2680 #, fuzzy, c-format msgid "failed to get peer address: %s" msgstr "Konnte ISP Namen '%s' nicht ermitteln" #: qemud/remote.c:2701 #, fuzzy, c-format msgid "sasl context setup failed %d (%s)" msgstr "Erwerb des neuen Kontexts fehlgeschlagen.\n" #: qemud/remote.c:2714 #, fuzzy msgid "cannot get TLS cipher size" msgstr "Kann den offiziellen Hostnamen nicht bekommen" #: qemud/remote.c:2723 #, c-format msgid "cannot set SASL external SSF %d (%s)" msgstr "" #: qemud/remote.c:2751 #, c-format msgid "cannot set SASL security props %d (%s)" msgstr "" #: qemud/remote.c:2767 #, c-format msgid "cannot list SASL mechanisms %d (%s)" msgstr "" #: qemud/remote.c:2776 msgid "cannot allocate mechlist" msgstr "Farbtabelleneinträge konnten nicht bereitgestellt werden" #: qemud/remote.c:2807 src/remote_internal.c:6161 #, c-format msgid "cannot query SASL ssf on connection %d (%s)" msgstr "" #: qemud/remote.c:2817 #, c-format msgid "negotiated SSF %d was not strong enough" msgstr "" #: qemud/remote.c:2846 #, c-format msgid "cannot query SASL username on connection %d (%s)" msgstr "" #: qemud/remote.c:2854 msgid "no client username was found" msgstr "kein Client-Benutzername gefunden" #: qemud/remote.c:2864 #, fuzzy msgid "out of memory copying username" msgstr "zu wenig Arbeitsspeicher" #: qemud/remote.c:2883 #, c-format msgid "SASL client %s not allowed in whitelist" msgstr "" #: qemud/remote.c:2913 qemud/remote.c:3000 msgid "client tried invalid SASL start request" msgstr "" #: qemud/remote.c:2928 #, c-format msgid "sasl start failed %d (%s)" msgstr "Start von sasl fehlgeschlagen %d (%s)" #: qemud/remote.c:2935 #, c-format msgid "sasl start reply data too long %d" msgstr "" #: qemud/remote.c:3014 #, c-format msgid "sasl step failed %d (%s)" msgstr "sasl step fehlgeschlagen %d (%s)" #: qemud/remote.c:3022 #, c-format msgid "sasl step reply data too long %d" msgstr "" #: qemud/remote.c:3078 msgid "client tried unsupported SASL init request" msgstr "" #: qemud/remote.c:3091 msgid "client tried unsupported SASL start request" msgstr "" #: qemud/remote.c:3104 msgid "client tried unsupported SASL step request" msgstr "" #: qemud/remote.c:3145 qemud/remote.c:3213 msgid "client tried invalid PolicyKit init request" msgstr "" #: qemud/remote.c:3150 qemud/remote.c:3218 msgid "cannot get peer socket identity" msgstr "" #: qemud/remote.c:3154 qemud/remote.c:3222 #, c-format msgid "Checking PID %d running as %d" msgstr "Prüfe PID %d läuft als %d" #: qemud/remote.c:3158 #, fuzzy, c-format msgid "Caller PID was too large %d" msgstr "nparams zu lang" #: qemud/remote.c:3163 #, fuzzy, c-format msgid "Cannot invoke %s" msgstr "Konnte Datei \"%s\" nicht öffnen" #: qemud/remote.c:3167 #, c-format msgid "Policy kit denied action %s from pid %d, uid %d, result: %d\n" msgstr "" #: qemud/remote.c:3171 #, c-format msgid "Policy allowed action %s from pid %d, uid %d" msgstr "" #: qemud/remote.c:3226 #, c-format msgid "Failed to lookup policy kit caller: %s" msgstr "" #: qemud/remote.c:3233 #, fuzzy, c-format msgid "Failed to create polkit action %s\n" msgstr "Erstellung des DDE-Zeichenkette gescheitert" #: qemud/remote.c:3243 #, fuzzy, c-format msgid "Failed to create polkit context %s\n" msgstr "Erstellung des DDE-Zeichenkette gescheitert" #: qemud/remote.c:3261 #, c-format msgid "Policy kit failed to check authorization %d %s" msgstr "" #: qemud/remote.c:3275 #, c-format msgid "Policy kit denied action %s from pid %d, uid %d, result: %s\n" msgstr "" #: qemud/remote.c:3280 #, c-format msgid "Policy allowed action %s from pid %d, uid %d, result %s" msgstr "" #: qemud/remote.c:3305 msgid "client tried unsupported PolicyKit init request" msgstr "" #: qemud/remote.c:3361 msgid "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX" msgstr "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX" #: qemud/remote.c:3828 msgid "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX" msgstr "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX" #: qemud/remote.c:4180 qemud/remote.c:4346 #, fuzzy msgid "maxnames > REMOTE_NODE_DEVICE_NAME_LIST_MAX" msgstr "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX" #: qemud/remote.c:4241 qemud/remote.c:4271 qemud/remote.c:4312 #: qemud/remote.c:4340 qemud/remote.c:4382 qemud/remote.c:4408 #: qemud/remote.c:4434 qemud/remote.c:4482 #, fuzzy msgid "node_device not found" msgstr "ISO-Pfad nicht gefunden" #: qemud/remote.c:4618 #, fuzzy msgid "maxuuids > REMOTE_SECRET_UUID_LIST_MAX" msgstr "maxids > REMOTE_DOMAIN_ID_LIST_MAX" #: src/bridge.c:413 msgid "Not enabling IFF_VNET_HDR; TUNGETFEATURES ioctl() not implemented" msgstr "" #: src/bridge.c:419 msgid "" "Not enabling IFF_VNET_HDR; TUNGETFEATURES ioctl() reports no IFF_VNET_HDR" msgstr "" #: src/bridge.c:428 msgid "Not enabling IFF_VNET_HDR; TUNGETIFF ioctl() not implemented" msgstr "" #: src/bridge.c:433 msgid "Enabling IFF_VNET_HDR" msgstr "" #: src/bridge.c:438 msgid "Not enabling IFF_VNET_HDR; disabled at build time" msgstr "" #: src/conf.c:354 msgid "unterminated number" msgstr "unbegrenzte Nummer" #: src/conf.c:387 src/conf.c:403 src/conf.c:414 msgid "unterminated string" msgstr "unbegrenzter String" #: src/conf.c:441 src/conf.c:504 msgid "expecting a value" msgstr "erwarte einen Wert" #: src/conf.c:452 #, fuzzy msgid "lists not allowed in VMX format" msgstr "Die DHCP-Startadresse entspricht nicht dem Netzwerk %s" #: src/conf.c:466 msgid "expecting a separator in list" msgstr "erwarte ein Trennzeichen in der Liste" #: src/conf.c:489 #, fuzzy msgid "list is not closed with ]" msgstr "Die DHCP-Startadresse entspricht nicht dem Netzwerk %s" #: src/conf.c:496 msgid "numbers not allowed in VMX format" msgstr "" #: src/conf.c:539 msgid "expecting a name" msgstr "erwarte einen Namen" #: src/conf.c:603 msgid "expecting a separator" msgstr "erwarte ein Trennzeichen" #: src/conf.c:634 msgid "expecting an assignment" msgstr "erwarte eine Anweisung" #: src/conf.c:923 msgid "failed to open file" msgstr "Öffnen der Datei scheiterte" #: src/conf.c:934 msgid "failed to save content" msgstr "Speichern des Inhalts scheiterte" #: src/console.c:76 #, fuzzy, c-format msgid "unable to open tty %s: %s\n" msgstr "Das angeforderte HTML-Dokument konnte nicht geöffnet werden: %s" #: src/console.c:87 #, fuzzy, c-format msgid "unable to get tty attributes: %s\n" msgstr "Kann TTY-Label nicht wiederherstellen...\n" #: src/console.c:96 #, fuzzy, c-format msgid "unable to set tty attributes: %s\n" msgstr "Einstellung von PAM_TTY fehlgeschlagen\n" #: src/console.c:131 #, fuzzy, c-format msgid "failure waiting for I/O: %s\n" msgstr "Wartezeit für das Ende eines Subprozesses abgelaufen" #: src/console.c:145 #, c-format msgid "failure reading input: %s\n" msgstr "Fehler beim Lesen der Eingabe: %s\n" #: src/console.c:167 #, c-format msgid "failure writing output: %s\n" msgstr "Fehler beim Schreiben der Ausgabe: %s\n" #: src/datatypes.c:338 msgid "failed to add domain to connection hash table" msgstr "Hinzufügen der Domain zur Verbindungs-Hashtabelle schlug fehl" #: src/datatypes.c:379 msgid "domain missing from connection hash table" msgstr "Fehlende Domain in Verbindungs-Hashtabelle" #: src/datatypes.c:479 msgid "failed to add network to connection hash table" msgstr "Hinzufügen des Netzwerks zur Verbindungs-Hashtabelle schlug fehl" #: src/datatypes.c:517 msgid "network missing from connection hash table" msgstr "Fehlendes Netzwerk in Verbindungs-Hashtabelle" #: src/datatypes.c:621 #, c-format msgid "" "Failed to change interface mac address from %s to %s due to differing " "lengths." msgstr "" #: src/datatypes.c:652 #, fuzzy msgid "failed to add interface to connection hash table" msgstr "Hinzufügen des Netzwerks zur Verbindungs-Hashtabelle schlug fehl" #: src/datatypes.c:691 #, fuzzy msgid "interface missing from connection hash table" msgstr "Fehlendes Netzwerk in Verbindungs-Hashtabelle" #: src/datatypes.c:793 #, fuzzy msgid "failed to add storage pool to connection hash table" msgstr "Hinzufügen des Netzwerks zur Verbindungs-Hashtabelle schlug fehl" #: src/datatypes.c:832 #, fuzzy msgid "pool missing from connection hash table" msgstr "Fehlende Domain in Verbindungs-Hashtabelle" #: src/datatypes.c:936 #, fuzzy msgid "failed to add storage vol to connection hash table" msgstr "Hinzufügen des Netzwerks zur Verbindungs-Hashtabelle schlug fehl" #: src/datatypes.c:976 #, fuzzy msgid "vol missing from connection hash table" msgstr "Fehlende Domain in Verbindungs-Hashtabelle" #: src/datatypes.c:1072 #, fuzzy msgid "failed to add node dev to conn hash table" msgstr "Hinzufügen des Netzwerks zur Verbindungs-Hashtabelle schlug fehl" #: src/datatypes.c:1110 #, fuzzy msgid "dev missing from connection hash table" msgstr "Fehlende Domain in Verbindungs-Hashtabelle" #: src/datatypes.c:1201 #, fuzzy msgid "failed to add secret to conn hash table" msgstr "Hinzufügen des Netzwerks zur Verbindungs-Hashtabelle schlug fehl" #: src/datatypes.c:1237 #, fuzzy msgid "secret missing from connection hash table" msgstr "Fehlende Domain in Verbindungs-Hashtabelle" #: src/domain_conf.c:668 #, c-format msgid "unknown disk type '%s'" msgstr "Unbekannter Festplatten-Typ '%s'" #: src/domain_conf.c:733 #, c-format msgid "unknown disk device '%s'" msgstr "Unbekannter Festplatten-Gerät-Typ '%s'" #: src/domain_conf.c:759 #, c-format msgid "Invalid floppy device name: %s" msgstr "Ungültiger Floppy-Gerätenamen: %s" #: src/domain_conf.c:774 #, fuzzy, c-format msgid "Invalid harddisk device name: %s" msgstr "Name des gewünschten Anzeigegerätes" #: src/domain_conf.c:781 #, fuzzy, c-format msgid "unknown disk bus type '%s'" msgstr "Unbekannter Auth-Typ '%s'" #: src/domain_conf.c:806 #, c-format msgid "Invalid bus type '%s' for floppy disk" msgstr "" #: src/domain_conf.c:812 #, fuzzy, c-format msgid "Invalid bus type '%s' for disk" msgstr "Ungültiger Bus-Typ: %s" #: src/domain_conf.c:819 #, fuzzy, c-format msgid "unknown disk cache mode '%s'" msgstr "Unbekannter Auth-Typ '%s'" #: src/domain_conf.c:829 src/domain_conf.c:1068 src/domain_conf.c:2121 #, fuzzy, c-format msgid "Unable to parse devaddr parameter '%s'" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/domain_conf.c:891 #, fuzzy, c-format msgid "unknown filesystem type '%s'" msgstr "Unbekannter Gerät-Typ '%s'" #: src/domain_conf.c:990 #, fuzzy, c-format msgid "unknown interface type '%s'" msgstr "Unbekannter Gerät-Typ '%s'" #: src/domain_conf.c:1080 msgid "Cannot parse 'vlan' attribute" msgstr "" #: src/domain_conf.c:1088 msgid "" "No 'network' attribute specified with " msgstr "" #: src/domain_conf.c:1114 msgid "No 'dev' attribute specified with " msgstr "" #: src/domain_conf.c:1134 msgid "No 'port' attribute specified with socket interface" msgstr "" #: src/domain_conf.c:1139 msgid "Cannot parse 'port' attribute with socket interface" msgstr "" #: src/domain_conf.c:1147 msgid "No 'address' attribute specified with socket interface" msgstr "" #: src/domain_conf.c:1159 msgid "" "No 'name' attribute specified with " msgstr "" #: src/domain_conf.c:1183 msgid "Model name contains invalid characters" msgstr "Modell-Name enthält ungültige Zeichen" #: src/domain_conf.c:1315 #, fuzzy, c-format msgid "Unknown source mode '%s'" msgstr "Audio-Modell einfügen" #: src/domain_conf.c:1347 src/domain_conf.c:1431 #, fuzzy msgid "Missing source path attribute for char device" msgstr "fehlende Quellinformationen für das Gerät" #: src/domain_conf.c:1364 src/domain_conf.c:1381 #, fuzzy msgid "Missing source host attribute for char device" msgstr "fehlende Quellinformationen für das Gerät" #: src/domain_conf.c:1369 src/domain_conf.c:1386 src/domain_conf.c:1413 #, fuzzy msgid "Missing source service attribute for char device" msgstr "fehlende Quellinformationen für das Gerät" #: src/domain_conf.c:1404 #, fuzzy, c-format msgid "Unknown protocol '%s'" msgstr "Unbekannter Typ '%s'" #: src/domain_conf.c:1484 msgid "missing input device type" msgstr "Fehlender Eingabegerät-Typ" #: src/domain_conf.c:1490 #, fuzzy, c-format msgid "unknown input device type '%s'" msgstr "Unbekanntes Boot-Gerät`%s'" #: src/domain_conf.c:1497 #, fuzzy, c-format msgid "unknown input bus type '%s'" msgstr "Unbekannter Auth-Typ '%s'" #: src/domain_conf.c:1505 #, c-format msgid "ps2 bus does not support %s input device" msgstr "PS/2 unterstützt %s-Eingabegerät nicht" #: src/domain_conf.c:1511 src/domain_conf.c:1518 #, c-format msgid "unsupported input bus %s" msgstr "Nicht unterstützter Eingabe-Bus %s" #: src/domain_conf.c:1523 #, fuzzy, c-format msgid "xen bus does not support %s input device" msgstr "Nicht unterstützter Eingabegeräte-Typ %s" #: src/domain_conf.c:1568 #, fuzzy msgid "missing graphics device type" msgstr "Grafik-Gerät-Parameter-Fehler" #: src/domain_conf.c:1574 #, fuzzy, c-format msgid "unknown graphics device type '%s'" msgstr "Grafik-Gerät-Parameter-Fehler" #: src/domain_conf.c:1585 #, fuzzy, c-format msgid "cannot parse vnc port %s" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/domain_conf.c:1623 src/domain_conf.c:1685 #, fuzzy, c-format msgid "unknown fullscreen value '%s'" msgstr "Kann Wert von '%s' nicht lesen" #: src/domain_conf.c:1641 #, fuzzy, c-format msgid "cannot parse rdp port %s" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/domain_conf.c:1724 #, fuzzy, c-format msgid "unknown sound model '%s'" msgstr "Audio-Modell einfügen" #: src/domain_conf.c:1868 #, fuzzy, c-format msgid "unknown video model '%s'" msgstr "Audio-Modell einfügen" #: src/domain_conf.c:1874 msgid "missing video model and cannot determine default" msgstr "" #: src/domain_conf.c:1882 #, fuzzy, c-format msgid "cannot parse video ram '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/domain_conf.c:1892 #, fuzzy, c-format msgid "cannot parse video heads '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/domain_conf.c:1939 #, fuzzy, c-format msgid "cannot parse vendor id %s" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/domain_conf.c:1946 msgid "usb vendor needs id" msgstr "" #: src/domain_conf.c:1957 #, fuzzy, c-format msgid "cannot parse product %s" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/domain_conf.c:1965 msgid "usb product needs id" msgstr "" #: src/domain_conf.c:1976 src/domain_conf.c:2068 #, fuzzy, c-format msgid "cannot parse bus %s" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/domain_conf.c:1983 msgid "usb address needs bus id" msgstr "" #: src/domain_conf.c:1992 #, fuzzy, c-format msgid "cannot parse device %s" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/domain_conf.c:2000 msgid "usb address needs device id" msgstr "" #: src/domain_conf.c:2005 #, fuzzy, c-format msgid "unknown usb source type '%s'" msgstr "Unbekannter Auth-Typ '%s'" #: src/domain_conf.c:2015 msgid "vendor cannot be 0." msgstr "" #: src/domain_conf.c:2021 #, fuzzy msgid "missing vendor" msgstr "Max. # an fehlenden Worten:" #: src/domain_conf.c:2026 #, fuzzy msgid "missing product" msgstr "Max. # an fehlenden Worten:" #: src/domain_conf.c:2055 #, fuzzy, c-format msgid "cannot parse domain %s" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/domain_conf.c:2075 msgid "pci address needs bus id" msgstr "" #: src/domain_conf.c:2084 #, fuzzy, c-format msgid "cannot parse slot %s" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/domain_conf.c:2092 msgid "pci address needs slot id" msgstr "" #: src/domain_conf.c:2101 #, fuzzy, c-format msgid "cannot parse function %s" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/domain_conf.c:2109 msgid "pci address needs function id" msgstr "" #: src/domain_conf.c:2128 #, fuzzy, c-format msgid "unknown pci source type '%s'" msgstr "Unbekannter Auth-Typ '%s'" #: src/domain_conf.c:2161 #, fuzzy, c-format msgid "unknown hostdev mode '%s'" msgstr "Ungültiger Weiterleitungsmodus" #: src/domain_conf.c:2172 #, fuzzy, c-format msgid "unknown host device type '%s'" msgstr "Unbekanntes Boot-Gerät`%s'" #: src/domain_conf.c:2177 #, fuzzy msgid "missing type in hostdev" msgstr "Unzutreffendes '{'-Zeichen in einem Eintrag des MIME-Typs %s." #: src/domain_conf.c:2205 #, fuzzy, c-format msgid "unknown node %s" msgstr ": unbekannter Zeichensatz" #: src/domain_conf.c:2236 #, fuzzy, c-format msgid "unknown lifecycle action %s" msgstr "GIF: unbekannter Fehler!" #: src/domain_conf.c:2260 #, fuzzy msgid "missing security type" msgstr "Gerättypen-Feld" #: src/domain_conf.c:2267 #, fuzzy msgid "invalid security type" msgstr "Ungültiger FV OS-Typ" #: src/domain_conf.c:2280 #, fuzzy msgid "missing security model" msgstr "Audio-Modell einfügen" #: src/domain_conf.c:2289 msgid "security label is missing" msgstr "" #: src/domain_conf.c:2303 msgid "security imagelabel is missing" msgstr "" #: src/domain_conf.c:2336 src/domain_conf.c:3195 src/domain_conf.c:3236 #: src/domain_conf.c:3308 src/interface_conf.c:796 src/interface_conf.c:836 #: src/network_conf.c:479 src/network_conf.c:519 src/node_device_conf.c:1164 #: src/storage_conf.c:722 src/storage_conf.c:1132 msgid "missing root element" msgstr "Fehlendes root-Element" #: src/domain_conf.c:2376 msgid "unknown device type" msgstr "unbekannter Geräte-Typ" #: src/domain_conf.c:2457 msgid "unknown virt type" msgstr "unbekannter virt-Typ" #: src/domain_conf.c:2468 #, c-format msgid "no emulator for domain %s os type %s on architecture %s" msgstr "" #: src/domain_conf.c:2503 msgid "missing domain type attribute" msgstr "Fehlendes Domain-Typ-Attribut" #: src/domain_conf.c:2509 #, fuzzy, c-format msgid "invalid domain type %s" msgstr "Ungültiger FV OS-Typ" #: src/domain_conf.c:2525 src/network_conf.c:334 msgid "Failed to generate UUID" msgstr "UUID generieren fehlgeschlagen" #: src/domain_conf.c:2531 src/network_conf.c:341 src/storage_conf.c:511 #, fuzzy msgid "malformed uuid element" msgstr "XPM: Pixel-Daten in falscher Form !" #: src/domain_conf.c:2540 msgid "missing memory element" msgstr "Fehlendes Speicher-Element" #: src/domain_conf.c:2577 #, fuzzy, c-format msgid "unexpected feature %s" msgstr "Unerwarteter Parameter '%s'" #: src/domain_conf.c:2617 msgid "no OS type" msgstr "Kein OS-Typ" #: src/domain_conf.c:2645 #, c-format msgid "os type '%s' & arch '%s' combination is not supported" msgstr "" #: src/domain_conf.c:2653 src/xm_internal.c:714 #, fuzzy, c-format msgid "no supported architecture for os type '%s'" msgstr "Nicht unterstützte Architektur" #: src/domain_conf.c:2703 #, fuzzy msgid "cannot extract boot device" msgstr "Fehler beim Wechseln des Boot-Gerätes: %s" #: src/domain_conf.c:2711 #, fuzzy msgid "missing boot device" msgstr "Kein Boot-Gerät" #: src/domain_conf.c:2716 #, c-format msgid "unknown boot device '%s'" msgstr "Unbekanntes Boot-Gerät`%s'" #: src/domain_conf.c:2741 #, fuzzy msgid "cannot extract disk devices" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/domain_conf.c:2760 #, fuzzy msgid "cannot extract filesystem devices" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/domain_conf.c:2779 #, fuzzy msgid "cannot extract network devices" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/domain_conf.c:2800 #, fuzzy msgid "cannot extract parallel devices" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/domain_conf.c:2820 #, fuzzy msgid "cannot extract serial devices" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/domain_conf.c:2870 #, fuzzy msgid "cannot extract input devices" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/domain_conf.c:2905 #, fuzzy msgid "cannot extract graphics devices" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/domain_conf.c:2949 #, fuzzy msgid "cannot extract sound devices" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/domain_conf.c:2979 #, fuzzy msgid "cannot extract video devices" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/domain_conf.c:3004 msgid "cannot determine default video type" msgstr "" #: src/domain_conf.c:3020 #, fuzzy msgid "cannot extract host devices" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/domain_conf.c:3070 #, fuzzy msgid "no domain config" msgstr "system-config-printer/" #: src/domain_conf.c:3084 #, fuzzy msgid "missing domain state" msgstr "Fehlendes Domain-Typ-Attribut" #: src/domain_conf.c:3089 #, fuzzy, c-format msgid "invalid domain state '%s'" msgstr "Fehler beim Speichern der Domain: %s" #: src/domain_conf.c:3097 #, fuzzy msgid "invalid pid" msgstr "'%s' ist ungültig" #: src/domain_conf.c:3110 #, fuzzy msgid "no monitor path" msgstr "Pfad zur DB:" #: src/domain_conf.c:3131 #, fuzzy, c-format msgid "unsupported monitor type '%s'" msgstr "Nicht unterstützter Laufwerkstyp %s" #: src/domain_conf.c:3158 src/interface_conf.c:761 src/network_conf.c:444 #: src/node_device_conf.c:1129 src/storage_conf.c:651 #, fuzzy, c-format msgid "at line %d: %s" msgstr "Zeile&nnummern anzeigen" #: src/domain_conf.c:3189 src/domain_conf.c:3230 src/domain_conf.c:3302 #: src/interface_conf.c:790 src/interface_conf.c:830 src/network_conf.c:473 #: src/network_conf.c:513 src/node_device_conf.c:1158 src/storage_conf.c:715 #: src/storage_conf.c:1125 #, fuzzy msgid "failed to parse xml document" msgstr "Konnte HTML-Dokument nicht in der Kodierung %s anzeigen" #: src/domain_conf.c:3260 src/domain_conf.c:3331 src/interface_conf.c:729 #: src/network_conf.c:541 src/node_device_conf.c:1098 msgid "incorrect root element" msgstr "Nicht richtiges root-Element" #: src/domain_conf.c:3541 msgid "topology cpuset syntax error" msgstr "Topologie-Syntaxfehler beim Cpuset" #: src/domain_conf.c:3555 #, fuzzy, c-format msgid "unexpected lifecycle type %d" msgstr "Gerättypen-Feld" #: src/domain_conf.c:3578 #, fuzzy, c-format msgid "unexpected disk type %d" msgstr "Gerättypen-Feld" #: src/domain_conf.c:3583 #, fuzzy, c-format msgid "unexpected disk device %d" msgstr "Gerättypen-Feld" #: src/domain_conf.c:3588 #, fuzzy, c-format msgid "unexpected disk bus %d" msgstr "Normale Platten_partition:" #: src/domain_conf.c:3593 #, fuzzy, c-format msgid "unexpected disk cache mode %d" msgstr "Unerwarteter Dict-Knoten" #: src/domain_conf.c:3657 #, fuzzy, c-format msgid "unexpected filesystem type %d" msgstr "Gerättypen-Feld" #: src/domain_conf.c:3709 src/domain_conf.c:4000 #, fuzzy, c-format msgid "unexpected net type %d" msgstr "Gerättypen-Feld" #: src/domain_conf.c:3807 #, fuzzy, c-format msgid "unexpected char type %d" msgstr "Gerättypen-Feld" #: src/domain_conf.c:3907 src/xend_internal.c:5543 #, fuzzy, c-format msgid "unexpected sound model %d" msgstr "Audio-Modell einfügen" #: src/domain_conf.c:3939 #, fuzzy, c-format msgid "unexpected video model %d" msgstr "Audio-Modell einfügen" #: src/domain_conf.c:3973 src/xend_internal.c:5565 #, fuzzy, c-format msgid "unexpected input type %d" msgstr "Gerättypen-Feld" #: src/domain_conf.c:3978 #, fuzzy, c-format msgid "unexpected input bus type %d" msgstr "Standard-Transfertyp:" #: src/domain_conf.c:4096 #, fuzzy, c-format msgid "unexpected hostdev mode %d" msgstr "Ungültiger Weiterleitungsmodus" #: src/domain_conf.c:4103 #, fuzzy, c-format msgid "unexpected hostdev type %d" msgstr "Gerättypen-Feld" #: src/domain_conf.c:4160 #, fuzzy, c-format msgid "unexpected domain type %d" msgstr "Gerättypen-Feld" #: src/domain_conf.c:4249 #, fuzzy, c-format msgid "unexpected boot device type %d" msgstr "Fehler beim Wechseln des Boot-Gerätes: %s" #: src/domain_conf.c:4267 #, fuzzy, c-format msgid "unexpected feature %d" msgstr "Unerwarteter Parameter '%s'" #: src/domain_conf.c:4464 src/network_conf.c:659 #, fuzzy, c-format msgid "cannot create config directory '%s'" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/domain_conf.c:4473 src/network_conf.c:668 #, fuzzy, c-format msgid "cannot create config file '%s'" msgstr "Kann den Inhalt der Datei %s nicht öffnen!" #: src/domain_conf.c:4481 src/network_conf.c:676 #, fuzzy, c-format msgid "cannot write config file '%s'" msgstr "Schreibfehler bei Datei '%s'" #: src/domain_conf.c:4488 src/network_conf.c:683 #, fuzzy, c-format msgid "cannot save config file '%s'" msgstr "Kann den Inhalt der Datei %s nicht öffnen!" #: src/domain_conf.c:4617 #, fuzzy, c-format msgid "unexpected domain %s already exists" msgstr "Dateiname bereits vorhanden" #: src/domain_conf.c:4660 src/network_conf.c:785 src/storage_conf.c:1461 #, fuzzy, c-format msgid "Failed to open dir '%s'" msgstr "Konnte '%s' nicht für %s öffnen." #: src/domain_conf.c:4725 #, fuzzy, c-format msgid "cannot remove config %s" msgstr "system-config-printer/" #: src/interface_conf.c:109 src/interface_conf.c:370 #, fuzzy msgid "interface has no name" msgstr "Netzwerk nicht gefunden" #: src/interface_conf.c:117 msgid "interface mtu value is improper" msgstr "" #: src/interface_conf.c:133 msgid "interface misses the start mode attribute" msgstr "" #: src/interface_conf.c:144 #, fuzzy, c-format msgid "unknown interface startmode %s" msgstr "Unbekannter Gerät-Typ '%s'" #: src/interface_conf.c:176 #, fuzzy, c-format msgid "unknown bonding mode %s" msgstr "Audio-Modell einfügen" #: src/interface_conf.c:197 #, fuzzy, c-format msgid "unknown mii bonding carrier %s" msgstr "Unbekannter Festplatten-Gerät-Typ '%s'" #: src/interface_conf.c:220 #, fuzzy, c-format msgid "unknown arp bonding validate %s" msgstr "Unbekannter Gerät-Typ '%s'" #: src/interface_conf.c:244 #, fuzzy, c-format msgid "unknown dhcp peerdns value %s" msgstr "Kann Wert von '%s' nicht lesen" #: src/interface_conf.c:269 #, fuzzy msgid "Invalid ip address prefix value" msgstr "ungültige MAC-Adresse" #: src/interface_conf.c:294 msgid "interface miss dhcp or ip adressing" msgstr "" #: src/interface_conf.c:316 msgid "protocol misses the family attribute" msgstr "" #: src/interface_conf.c:325 #, fuzzy, c-format msgid "unsupported protocol family '%s'" msgstr "Nicht unterstütztes Format in der Zwischenablage." #: src/interface_conf.c:349 #, fuzzy msgid "interface has no type" msgstr "Netzwerkschnittstellentyp" #: src/interface_conf.c:363 #, fuzzy, c-format msgid "interface has unsupported type '%s'" msgstr "Nicht unterstützter Laufwerkstyp %s" #: src/interface_conf.c:376 #, c-format msgid "vlan %s has no tag" msgstr "" #: src/interface_conf.c:381 #, c-format msgid "vlan %s has interface name" msgstr "" #: src/interface_conf.c:417 #, fuzzy msgid "bridge has no interfaces" msgstr "Netzwerkschnittstelle abhängen" #: src/interface_conf.c:457 #, fuzzy msgid "bond has no interfaces" msgstr "Netzwerkschnittstelle abhängen" #: src/interface_conf.c:503 msgid "bond interface miimon freq missing or invalid" msgstr "" #: src/interface_conf.c:511 msgid "bond interface miimon downdelay invalid" msgstr "" #: src/interface_conf.c:520 msgid "bond interface miimon updelay invalid" msgstr "" #: src/interface_conf.c:541 #, fuzzy msgid "bond interface arpmon interval missing or invalid" msgstr "Ungültiger Verbindungszeiger in %s" #: src/interface_conf.c:550 #, fuzzy msgid "bond interface arpmon target missing" msgstr "Ungültiger Verbindungszeiger in" #: src/interface_conf.c:564 msgid "bond interface need miimon or arpmon element" msgstr "" #: src/interface_conf.c:577 msgid "vlan interface misses the tag attribute" msgstr "" #: src/interface_conf.c:585 msgid "vlan interface misses name attribute" msgstr "" #: src/interface_conf.c:602 #, fuzzy msgid "interface misses the type attribute" msgstr "Ungültiges Domain-Typ-Attribut" #: src/interface_conf.c:608 #, fuzzy, c-format msgid "unknown interface type %s" msgstr "Unbekannter Gerät-Typ '%s'" #: src/interface_conf.c:644 msgid "bridge interface misses the bridge element" msgstr "" #: src/interface_conf.c:656 #, c-format msgid "bridge interface stp should be on or off got %s" msgstr "" #: src/interface_conf.c:679 msgid "bond interface misses the bond element" msgstr "" #: src/interface_conf.c:700 msgid "vlan interface misses the vlan element" msgstr "" #: src/interface_conf.c:855 #, fuzzy msgid "bare ethernet has no name" msgstr "Konnte keinen vorübergehenden Dateinamen erstellen." #: src/interface_conf.c:887 #, fuzzy, c-format msgid "bare interface type %d unknown" msgstr "Netzwerkschnittstellentyp" #: src/interface_conf.c:955 msgid "bond arp monitoring has no target" msgstr "" #: src/interface_conf.c:969 #, c-format msgid "bond monitoring type %d unknown" msgstr "" #: src/interface_conf.c:987 msgid "vlan misses the tag name" msgstr "" #: src/interface_conf.c:1050 msgid "virInterfaceDefFormat unknown startmode" msgstr "" #: src/interface_conf.c:1066 msgid "virInterfaceDefFormat argument problems" msgstr "" #: src/interface_conf.c:1072 #, fuzzy, c-format msgid "unexpected interface type %d" msgstr "Gerättypen-Feld" #: src/interface_driver.c:186 #, fuzzy msgid "failed to get number of interfaces on host" msgstr "Skript zur Überbrückung einer Netzwerkschnittstelle" #: src/interface_driver.c:207 #, fuzzy msgid "failed to list host interfaces" msgstr "Netzwerk wurde nicht gefunden" #: src/interface_driver.c:228 #, fuzzy msgid "failed to get number of defined interfaces on host" msgstr "Skript zur Überbrückung einer Netzwerkschnittstelle" #: src/interface_driver.c:249 #, fuzzy msgid "failed to list host defined interfaces" msgstr "Netzwerk wurde nicht gefunden" #: src/interface_driver.c:316 msgid "multiple interfaces with matching MAC address" msgstr "" #: src/iptables.c:103 #, fuzzy, c-format msgid "Failed to run '%s %s': %s" msgstr "Kann '%s' nicht ausführen\n" #: src/iptables.c:151 msgid "Failed to read " msgstr "Lesen fehlgeschlagen" #: src/iptables.c:180 msgid "Failed to write to " msgstr "Schreiben fehlgeschlagen zu" #: src/iptables.c:246 #, c-format msgid "Failed to create directory %s : %s" msgstr "Das Verzeichnis erzeugen fehlgeschlagen %s : %s" #: src/iptables.c:252 #, c-format msgid "Failed to saves iptables rules to %s : %s" msgstr "Speichern der Iptables-Regel fehlgeschlagen zu %s : %s" #: src/iptables.c:553 #, c-format msgid "Failed to remove iptables rule '%s' from chain '%s' in table '%s': %s" msgstr "" #: src/iptables.c:563 #, c-format msgid "Failed to add iptables rule '%s' to chain '%s' in table '%s': %s" msgstr "" #: src/libvirt.c:1026 #, fuzzy msgid "could not parse connection URI" msgstr "Konnte semanage-Verbindung nicht herstellen" #: src/libvirt.c:2217 #, fuzzy msgid "cannot get working directory" msgstr "Konnte Arbeits-Verzeichnis nicht ermitteln" #: src/libvirt.c:2224 src/libvirt.c:2300 #, fuzzy msgid "path too long" msgstr "Der Pfad '%s' enthält zu viele \"..\"." #: src/libvirt.c:2293 #, fuzzy msgid "cannot get current directory" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/libvirt.c:2793 msgid "virDomainGetXMLDesc with secure flag" msgstr "" #: src/libvirt.c:2951 #, fuzzy msgid "domainMigratePrepare did not set uri" msgstr "Domaininformation inkorrekt, domid nicht numerisch" #: src/libvirt.c:3031 #, fuzzy msgid "domainMigratePrepare2 did not set uri" msgstr "Domaininformation inkorrekt, domid nicht numerisch" #: src/libvirt.c:3845 msgid "path is NULL" msgstr "Pfad is NULL" #: src/libvirt.c:3851 msgid "flags must be zero" msgstr "Flag muss Null sein" #: src/libvirt.c:3858 msgid "buffer is NULL" msgstr "Buffer ist NULL" #: src/libvirt.c:3959 src/qemu_driver.c:6714 msgid "flags parameter must be VIR_MEMORY_VIRTUAL or VIR_MEMORY_PHYSICAL" msgstr "" #: src/libvirt.c:3966 msgid "buffer is NULL but size is non-zero" msgstr "Buffer ist NULL, aber Grösse ist nicht null" #: src/logging.c:318 msgid "Ignoring invalid log level setting." msgstr "" #: src/logging.c:746 msgid "Ignoring invalid log output setting." msgstr "" #: src/logging.c:802 msgid "Ignoring invalid log filter setting." msgstr "" #: src/logging.c:858 msgid "Ignoring invalid log level setting" msgstr "" #: src/lxc_container.c:128 msgid "setsid failed" msgstr "setsid fehlgeschlagen" #: src/lxc_container.c:134 #, fuzzy msgid "ioctl(TIOCSTTY) failed" msgstr "Befehlsausführung '%s' schlug fehl" #: src/lxc_container.c:147 #, fuzzy msgid "dup2(stdin) failed" msgstr "Befehlsausführung '%s' schlug fehl" #: src/lxc_container.c:153 #, fuzzy msgid "dup2(stdout) failed" msgstr "Befehlsausführung '%s' schlug fehl" #: src/lxc_container.c:159 #, fuzzy msgid "dup2(stderr) failed" msgstr "Befehlsausführung '%s' schlug fehl" #: src/lxc_container.c:187 #, fuzzy msgid "unable to send container continue message" msgstr "Speicherzuweisung gescheitert" #: src/lxc_container.c:216 #, fuzzy msgid "Failed to read the container continue message" msgstr "Erwerb des neuen Kontexts fehlgeschlagen.\n" #: src/lxc_container.c:297 #, fuzzy msgid "failed to make root private" msgstr "NAT für das physikalische Gerät %s" #: src/lxc_container.c:308 src/lxc_container.c:330 src/lxc_container.c:501 #, fuzzy, c-format msgid "failed to create %s" msgstr "Cursor konnte nicht erzeugt werden" #: src/lxc_container.c:317 #, fuzzy, c-format msgid "failed to mount empty tmpfs at %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/lxc_container.c:338 #, fuzzy, c-format msgid "failed to bind new root %s into tmpfs" msgstr "Verzeichnis konnte nicht gewechselt werden" #: src/lxc_container.c:347 #, fuzzy, c-format msgid "failed to chroot into %s" msgstr "Speichern des Inhalts scheiterte" #: src/lxc_container.c:355 #, fuzzy msgid "failed to pivot root" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/lxc_container.c:398 #, fuzzy, c-format msgid "failed to mkdir %s" msgstr "NAT für das physikalische Gerät %s" #: src/lxc_container.c:404 #, fuzzy, c-format msgid "failed to mount %s on %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/lxc_container.c:412 #, fuzzy msgid "cannot create /dev/pts" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/lxc_container.c:419 #, fuzzy msgid "failed to mount /dev/pts in container" msgstr "»%s« konnte nicht zum Schreiben geöffnet werden: %s" #: src/lxc_container.c:454 #, fuzzy, c-format msgid "failed to make device %s" msgstr "NAT für das physikalische Gerät %s" #: src/lxc_container.c:463 #, fuzzy msgid "failed to create symlink /dev/ptmx to /dev/pts/ptmx" msgstr "Cursor konnte nicht erzeugt werden" #: src/lxc_container.c:471 #, fuzzy msgid "failed to make device /dev/ptmx" msgstr "NAT für das physikalische Gerät %s" #: src/lxc_container.c:509 src/lxc_container.c:625 #, fuzzy, c-format msgid "failed to mount %s at %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/lxc_container.c:532 #, fuzzy msgid "failed to read /proc/mounts" msgstr "Konnte keine PID von Sperr-Datei lesen." #: src/lxc_container.c:561 #, fuzzy, c-format msgid "failed to unmount '%s'" msgstr "Kann '%s' nicht ausführen\n" #: src/lxc_container.c:611 #, fuzzy msgid "failed to make / slave" msgstr "NAT für das physikalische Gerät %s" #: src/lxc_container.c:635 #, fuzzy msgid "failed to mount /proc" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/lxc_container.c:674 #, fuzzy, c-format msgid "failed to remove capabilities %d" msgstr "Abrufen der Fähigkeiten gescheitert" #: src/lxc_container.c:680 src/lxc_controller.c:253 #, fuzzy, c-format msgid "failed to apply capabilities: %d" msgstr "Abrufen der Fähigkeiten gescheitert" #: src/lxc_container.c:687 #, fuzzy, c-format msgid "failed to lock capabilities: %d" msgstr "Abrufen der Fähigkeiten gescheitert" #: src/lxc_container.c:692 src/lxc_controller.c:257 msgid "libcap-ng support not compiled in, unable to clear capabilities" msgstr "" #: src/lxc_container.c:720 msgid "lxcChild() passed invalid vm definition" msgstr "lxcChild() übergab ungültige VM-Definition" #: src/lxc_container.c:741 #, fuzzy, c-format msgid "failed to open tty %s" msgstr "Konnte '%s' nicht für %s öffnen." #: src/lxc_container.c:819 #, fuzzy msgid "failed to run clone container" msgstr "»%s« konnte nicht zum Schreiben geöffnet werden: %s" #: src/lxc_controller.c:92 #, fuzzy msgid "Unable to get cgroup for driver" msgstr "Konnte nicht die Zugriffsrechte der Datei '%s' ermitteln" #: src/lxc_controller.c:99 #, fuzzy, c-format msgid "Unable to create cgroup for domain %s" msgstr "Konnte keinen Registrierungs-Eintrag für '%s'-Dateien erstellen." #: src/lxc_controller.c:107 #, fuzzy, c-format msgid "Unable to set memory limit for domain %s" msgstr "Konnte Zwischenablage nicht schließen." #: src/lxc_controller.c:115 #, fuzzy, c-format msgid "Unable to deny devices for domain %s" msgstr "Fehler beim Lösen des Geräts von %s" #: src/lxc_controller.c:128 #, fuzzy, c-format msgid "Unable to allow device %c:%d:%d for domain %s" msgstr "Fehler beim Anhängen des Geräts von %s" #: src/lxc_controller.c:137 #, fuzzy, c-format msgid "Unable to allow PYT devices for domain %s" msgstr "Fehler beim Anhängen des Geräts von %s" #: src/lxc_controller.c:145 #, fuzzy, c-format msgid "Unable to add task %d to cgroup for domain %s" msgstr "Konnte nicht die Zugriffsrechte der Datei '%s' ermitteln" #: src/lxc_controller.c:173 #, fuzzy, c-format msgid "failed to create server socket '%s'" msgstr "Aufbau der Verbindung zur Server '%s' 'on topic' '%s' gescheitert" #: src/lxc_controller.c:185 #, fuzzy, c-format msgid "failed to bind server socket '%s'" msgstr "Versuch, DDE-Server '%s' zu registrieren, gescheitert" #: src/lxc_controller.c:191 #, fuzzy, c-format msgid "failed to listen server socket %s" msgstr "Versuch, DDE-Server '%s' zu registrieren, gescheitert" #: src/lxc_controller.c:225 #, fuzzy, c-format msgid "read of fd %d failed" msgstr "Befehlsausführung '%s' schlug fehl" #: src/lxc_controller.c:232 #, fuzzy, c-format msgid "write to fd %d failed" msgstr "Konnte Sperr-Datei '%s' nicht schreiben" #: src/lxc_controller.c:303 msgid "epoll_create(2) failed" msgstr "epoll_create(2) fehlgeschlagen" #: src/lxc_controller.c:313 msgid "epoll_ctl(appPty) failed" msgstr "epoll_ctl(appPty) fehlgeschlagen" #: src/lxc_controller.c:319 src/lxc_controller.c:327 src/lxc_controller.c:335 #: src/lxc_controller.c:355 src/lxc_controller.c:361 msgid "epoll_ctl(contPty) failed" msgstr "epoll_ctl(contPty) fehlgeschlagen" #: src/lxc_controller.c:378 #, c-format msgid "error event %d" msgstr "Fehler-Ereignis %d" #: src/lxc_controller.c:399 msgid "epoll_wait() failed" msgstr "epoll_wait() fehlgeschlagen" #: src/lxc_controller.c:449 #, fuzzy, c-format msgid "failed to move interface %s to ns %d" msgstr "Abruf der Schnittstellenstatistiken %s %s gescheitert" #: src/lxc_controller.c:474 #, fuzzy, c-format msgid "failed to delete veth: %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/lxc_controller.c:507 msgid "sockpair failed" msgstr "sockpair fehlgeschlagen" #: src/lxc_controller.c:537 #, fuzzy msgid "cannot unshare mount namespace" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/lxc_controller.c:543 #, fuzzy msgid "failed to switch root mount into slave mode" msgstr "Speichern des Inhalts scheiterte" #: src/lxc_controller.c:555 #, fuzzy, c-format msgid "failed to make path %s" msgstr "NAT für das physikalische Gerät %s" #: src/lxc_controller.c:563 #, fuzzy, c-format msgid "failed to mount devpts on %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/lxc_controller.c:581 src/lxc_controller.c:590 src/lxc_driver.c:963 #, fuzzy msgid "failed to allocate tty" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/lxc_controller.c:767 #, fuzzy, c-format msgid "Unable to write pid file '%s/%s.pid'" msgstr "Konnte Sperr-Datei '%s' nicht schreiben" #: src/lxc_controller.c:781 #, fuzzy msgid "Unable to change to root dir" msgstr "Maximale Speichergrösse (MaxMemorySize) konnte nicht geändert werden" #: src/lxc_controller.c:787 #, fuzzy msgid "Unable to become session leader" msgstr "Konfigurationsdatei %s konnte nicht gelesen werden" #: src/lxc_controller.c:795 #, fuzzy msgid "Failed connection from LXC driver" msgstr "Verbindungsabbruch vom Hypervisor schlug fehl" #: src/lxc_driver.c:101 #, c-format msgid "unexpected LXC URI path '%s', try lxc:///" msgstr "" #: src/lxc_driver.c:109 #, fuzzy msgid "lxc state driver is not active" msgstr "Speicher-Pool ist nicht aktiv" #: src/lxc_driver.c:322 src/lxc_driver.c:337 src/lxc_driver.c:1122 #: src/lxc_driver.c:1141 src/qemu_driver.c:3030 src/qemu_driver.c:3049 #: src/qemu_driver.c:4344 src/qemu_driver.c:4363 src/qemu_driver.c:4855 #: src/qemu_driver.c:4870 #, fuzzy, c-format msgid "domain '%s' is already defined with uuid %s" msgstr "" "Fehler beim Wiederherstellen der Domain '%s'. Läuft die Domain bereits?" #: src/lxc_driver.c:345 src/lxc_driver.c:1069 src/lxc_driver.c:1149 msgid "System lacks NETNS support" msgstr "" #: src/lxc_driver.c:393 src/lxc_driver.c:446 src/lxc_driver.c:492 #: src/lxc_driver.c:517 src/opennebula/one_driver.c:300 #: src/opennebula/one_driver.c:329 src/opennebula/one_driver.c:404 #: src/openvz_driver.c:350 src/openvz_driver.c:389 src/openvz_driver.c:433 #: src/openvz_driver.c:470 src/openvz_driver.c:908 src/openvz_driver.c:950 #: src/openvz_driver.c:981 src/openvz_driver.c:1054 src/uml_driver.c:1294 #: src/uml_driver.c:1417 src/uml_driver.c:1457 src/uml_driver.c:1528 #: src/uml_driver.c:1589 src/uml_driver.c:1633 src/uml_driver.c:1659 #: src/uml_driver.c:1733 #, fuzzy msgid "no domain with matching uuid" msgstr "" "Es wurde keine Anwendung namens »%s« gefunden, die ein Lesezeichen für »%" "s«registriert hat." #: src/lxc_driver.c:399 src/openvz_driver.c:913 src/qemu_driver.c:4934 #: src/uml_driver.c:1595 #, fuzzy msgid "cannot delete active domain" msgstr "Kann keine aktive DFÜ-Verbindung finden: %s" #: src/lxc_driver.c:405 src/opennebula/one_driver.c:306 src/qemu_driver.c:4940 #: src/uml_driver.c:1601 #, fuzzy msgid "cannot undefine transient domain" msgstr "Kann keine aktive DFÜ-Verbindung finden: %s" #: src/lxc_driver.c:457 #, fuzzy, c-format msgid "Unable to get cgroup for %s\n" msgstr "Konnte nicht die Zugriffsrechte der Datei '%s' ermitteln" #: src/lxc_driver.c:559 #, fuzzy, c-format msgid "waitpid failed to wait for container %d: %d" msgstr "»%s« konnte nicht zum Schreiben geöffnet werden: %s" #: src/lxc_driver.c:649 #, fuzzy msgid "failed to get bridge for interface" msgstr "Skript zur Überbrückung einer Netzwerkschnittstelle" #: src/lxc_driver.c:660 #, fuzzy, c-format msgid "failed to create veth device pair: %d" msgstr "Fehler beim Anhängen des Geräts von %s" #: src/lxc_driver.c:673 #, fuzzy msgid "failed to allocate veth names" msgstr "Konnte ISP Namen '%s' nicht ermitteln" #: src/lxc_driver.c:679 #, fuzzy, c-format msgid "failed to add %s device to %s" msgstr "NAT für das physikalische Gerät %s" #: src/lxc_driver.c:686 #, fuzzy msgid "failed to enable parent ns veth device" msgstr "Speicherzuweisung gescheitert" #: src/lxc_driver.c:716 #, fuzzy msgid "failed to create client socket" msgstr "Erstellung des DDE-Zeichenkette gescheitert" #: src/lxc_driver.c:726 #, fuzzy msgid "failed to connect to client socket" msgstr "Verbindung fehlgeschlagen : Es fehlt der Username bzw. das Passwort" #: src/lxc_driver.c:751 #, fuzzy, c-format msgid "invalid PID %d for container" msgstr "Kann keinen Container für unbekanntes Control '%s' finden." #: src/lxc_driver.c:758 #, fuzzy, c-format msgid "failed to kill pid %d" msgstr "Konnte Prozess %d nicht abbrechen" #: src/lxc_driver.c:894 src/util.c:822 #, fuzzy, c-format msgid "cannot wait for '%s'" msgstr "Kann nicht auf Beendigung des Threads warten." #: src/lxc_driver.c:901 #, c-format msgid "container '%s' unexpectedly shutdown during startup" msgstr "" #: src/lxc_driver.c:949 #, fuzzy, c-format msgid "cannot create log directory '%s'" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/lxc_driver.c:986 #, fuzzy, c-format msgid "failed to open '%s'" msgstr "Konnte '%s' nicht für %s öffnen." #: src/lxc_driver.c:1006 #, fuzzy, c-format msgid "Failed to read pid file %s/%s.pid" msgstr "Konnte keine PID von Sperr-Datei lesen." #: src/lxc_driver.c:1063 src/opennebula/one_driver.c:425 #, fuzzy, c-format msgid "no domain named %s" msgstr "Fehler beim Speichern der Domain: %s" #: src/lxc_driver.c:1130 src/qemu_driver.c:3038 src/qemu_driver.c:4352 #, fuzzy, c-format msgid "domain is already active as '%s'" msgstr "" "Fehler beim Wiederherstellen der Domain '%s'. Läuft die Domain bereits?" #: src/lxc_driver.c:1201 src/lxc_driver.c:1334 src/opennebula/one_driver.c:513 #: src/opennebula/one_driver.c:538 #, c-format msgid "no domain with id %d" msgstr "keine Domain mit ID %d" #: src/lxc_driver.c:1392 src/qemu_driver.c:253 #, fuzzy, c-format msgid "Failed to autostart VM '%s': %s\n" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/lxc_driver.c:1637 #, fuzzy, c-format msgid "Unknown release: %s" msgstr ": unbekannter Zeichensatz" #: src/lxc_driver.c:1674 src/lxc_driver.c:1732 src/qemu_driver.c:6310 #: src/qemu_driver.c:6381 #, fuzzy, c-format msgid "No such domain %s" msgstr "Fehler beim Speichern der Domain: %s" #: src/lxc_driver.c:1685 src/qemu_driver.c:6327 msgid "invalid type for cpu_shares tunable, expected a 'ullong'" msgstr "" #: src/lxc_driver.c:1694 src/qemu_driver.c:6339 #, fuzzy, c-format msgid "Invalid parameter `%s'" msgstr "Ungültiger Netzwerk-Parameter" #: src/lxc_driver.c:1722 src/qemu_driver.c:6371 #, fuzzy msgid "Invalid parameter count" msgstr "Ungültiger Netzwerk-Parameter" #: src/lxc_driver.c:1768 src/lxc_driver.c:1795 src/qemu_driver.c:2905 #: src/qemu_driver.c:3101 src/qemu_driver.c:3151 src/qemu_driver.c:3200 #: src/qemu_driver.c:3237 src/qemu_driver.c:3279 src/qemu_driver.c:3306 #: src/qemu_driver.c:3331 src/qemu_driver.c:3454 src/qemu_driver.c:3495 #: src/qemu_driver.c:3682 src/qemu_driver.c:3841 src/qemu_driver.c:3939 #: src/qemu_driver.c:4000 src/qemu_driver.c:4069 src/qemu_driver.c:4158 #: src/qemu_driver.c:4193 src/qemu_driver.c:4474 src/qemu_driver.c:4706 #: src/qemu_driver.c:4928 src/qemu_driver.c:5665 src/qemu_driver.c:6125 #: src/qemu_driver.c:6183 src/qemu_driver.c:6210 src/qemu_driver.c:6436 #: src/qemu_driver.c:6574 src/qemu_driver.c:6634 src/qemu_driver.c:6708 #: src/qemu_driver.c:7057 src/uml_driver.c:1322 src/uml_driver.c:1347 #: src/uml_driver.c:1380 #, c-format msgid "no domain with matching uuid '%s'" msgstr "Kein Doamin mit übereinstimmender UUID '%s'" #: src/lxc_driver.c:1801 src/qemu_driver.c:6216 src/uml_driver.c:1665 #, fuzzy msgid "cannot set autostart for transient domain" msgstr "Name der inaktiven Domain" #: src/lxc_driver.c:1818 src/qemu_driver.c:6233 src/storage_driver.c:965 #: src/uml_driver.c:1682 #, fuzzy, c-format msgid "cannot create autostart directory %s" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/lxc_driver.c:1825 src/qemu_driver.c:6240 src/uml_driver.c:1689 #, fuzzy, c-format msgid "Failed to create symlink '%s to '%s'" msgstr "Cursor konnte nicht erzeugt werden" #: src/lxc_driver.c:1832 src/network_driver.c:1447 src/qemu_driver.c:6247 #: src/storage_driver.c:980 src/uml_driver.c:1696 #, fuzzy, c-format msgid "Failed to delete symlink '%s'" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/lxc_driver.c:1858 src/qemu_driver.c:2967 src/qemu_driver.c:6917 #, fuzzy msgid "failed to determine host name" msgstr "Konnte keinen vorübergehenden Dateinamen erstellen." #: src/network_conf.c:260 #, fuzzy, c-format msgid "cannot parse MAC address '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/network_conf.c:267 #, fuzzy, c-format msgid "cannot use name address '%s'" msgstr "Kann Adressbuchdatei nicht finden" #: src/network_conf.c:283 src/network_conf.c:370 #, fuzzy, c-format msgid "cannot parse IP address '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/network_conf.c:376 #, fuzzy, c-format msgid "cannot parse netmask '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/network_conf.c:400 msgid "Forwarding requested, but no IPv4 address/netmask provided" msgstr "" #: src/network_conf.c:408 #, fuzzy, c-format msgid "unknown forwarding type '%s'" msgstr "Unbekannter Gerät-Typ '%s'" #: src/network_conf.c:743 #, c-format msgid "Network config filename '%s' does not match network name '%s'" msgstr "" #: src/network_conf.c:834 #, fuzzy, c-format msgid "cannot remove config file '%s'" msgstr "Kann Temporärdatei '%s' nicht löschen" #: src/network_conf.c:908 #, c-format msgid "Bridge generation exceeded max id %d" msgstr "" #: src/network_conf.c:927 #, c-format msgid "bridge name '%s' already in use." msgstr "" #: src/network_driver.c:240 src/qemu_conf.c:1097 src/uml_conf.c:114 #, fuzzy msgid "cannot initialize bridge support" msgstr "Kann SciTech MGL nicht initialisieren !" #: src/network_driver.c:292 #, fuzzy msgid "Reloading iptables rules\n" msgstr "Neuladen der iptables-Regeln" #: src/network_driver.c:508 msgid "cannot start dhcp daemon without IP address for server" msgstr "" #: src/network_driver.c:514 src/network_driver.c:520 #, fuzzy, c-format msgid "cannot create directory %s" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/network_driver.c:573 #, fuzzy, c-format msgid "failed to add iptables rule to allow forwarding from '%s'" msgstr "" "Hinzufügen der iptables-Regel für Weiterleitung fehlgeschlagen von '%s' : %" "s\n" #: src/network_driver.c:584 #, fuzzy, c-format msgid "failed to add iptables rule to allow forwarding to '%s'" msgstr "" "Hinzufügen der iptables-Regel für Weiterleitung fehlgeschlagen zu %s : %s\n" #: src/network_driver.c:594 #, fuzzy, c-format msgid "failed to add iptables rule to enable masquerading to '%s'\n" msgstr "Speichern der Iptables-Regel fehlgeschlagen zu %s : %s" #: src/network_driver.c:626 #, fuzzy, c-format msgid "failed to add iptables rule to allow routing from '%s'" msgstr "Speichern der Iptables-Regel fehlgeschlagen zu %s : %s" #: src/network_driver.c:637 #, fuzzy, c-format msgid "failed to add iptables rule to allow routing to '%s'" msgstr "Speichern der Iptables-Regel fehlgeschlagen zu %s : %s" #: src/network_driver.c:663 src/network_driver.c:670 #, fuzzy, c-format msgid "failed to add iptables rule to allow DHCP requests from '%s'" msgstr "Speichern der Iptables-Regel fehlgeschlagen zu %s : %s" #: src/network_driver.c:678 src/network_driver.c:685 #, fuzzy, c-format msgid "failed to add iptables rule to allow DNS requests from '%s'" msgstr "Speichern der Iptables-Regel fehlgeschlagen zu %s : %s" #: src/network_driver.c:695 #, fuzzy, c-format msgid "failed to add iptables rule to block outbound traffic from '%s'" msgstr "Speichern der Iptables-Regel fehlgeschlagen zu %s : %s" #: src/network_driver.c:702 #, fuzzy, c-format msgid "failed to add iptables rule to block inbound traffic to '%s'" msgstr "Speichern der Iptables-Regel fehlgeschlagen zu %s : %s" #: src/network_driver.c:710 #, fuzzy, c-format msgid "failed to add iptables rule to allow cross bridge traffic on '%s'" msgstr "Speichern der Iptables-Regel fehlgeschlagen zu %s : %s" #: src/network_driver.c:812 src/network_driver.c:836 #, fuzzy, c-format msgid "cannot enable %s" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/network_driver.c:824 #, fuzzy, c-format msgid "cannot disable %s" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/network_driver.c:853 msgid "network is already active" msgstr "Netzwerk ist bereits aktiv" #: src/network_driver.c:859 #, fuzzy, c-format msgid "cannot create bridge '%s'" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/network_driver.c:876 #, fuzzy, c-format msgid "cannot set IP address on bridge '%s' to '%s'" msgstr "Setze Global auf still" #: src/network_driver.c:884 #, fuzzy, c-format msgid "cannot set netmask on bridge '%s' to '%s'" msgstr "Setze Global auf still" #: src/network_driver.c:891 #, fuzzy, c-format msgid "failed to bring the bridge '%s' up" msgstr "Einrichten der Usermode-Vernetzung fehlgeschlagen" #: src/network_driver.c:902 #, fuzzy msgid "failed to enable IP forwarding" msgstr "Aktivieren der IP-Weiterleitung fehlgeschlagen : %s" #: src/network_driver.c:933 src/network_driver.c:973 #, fuzzy, c-format msgid "Failed to bring down bridge '%s' : %s\n" msgstr "Öffnen von '%s' schlug fehl: %s" #: src/network_driver.c:940 src/network_driver.c:978 #, fuzzy, c-format msgid "Failed to delete bridge '%s' : %s\n" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/network_driver.c:954 #, fuzzy, c-format msgid "Shutting down network '%s'\n" msgstr "Fehler beim Herunterfahren der Domain: %s" #: src/network_driver.c:1011 src/network_driver.c:1236 #: src/network_driver.c:1274 src/network_driver.c:1297 #: src/network_driver.c:1332 src/network_driver.c:1387 #: src/network_driver.c:1412 #, fuzzy msgid "no network with matching uuid" msgstr "" "Es wurde keine Anwendung namens »%s« gefunden, die ein Lesezeichen für »%" "s«registriert hat." #: src/network_driver.c:1034 #, fuzzy, c-format msgid "no network with matching name '%s'" msgstr "" "Es wurde keine Anwendung namens »%s« gefunden, die ein Lesezeichen für »%" "s«registriert hat." #: src/network_driver.c:1242 #, fuzzy msgid "network is still active" msgstr "Netzwerk ist bereits aktiv" #: src/network_driver.c:1303 #, fuzzy msgid "network is not active" msgstr "'%s' ist keine gültige POT-Datei." #: src/network_driver.c:1355 #, fuzzy msgid "no network with matching id" msgstr "" "Es wurde keine Anwendung namens »%s« gefunden, die ein Lesezeichen für »%" "s«registriert hat." #: src/network_driver.c:1361 #, c-format msgid "network '%s' does not have a bridge name." msgstr "" #: src/network_driver.c:1418 #, fuzzy msgid "cannot set autostart for transient network" msgstr "Name der inaktiven Domain" #: src/network_driver.c:1433 #, fuzzy, c-format msgid "cannot create autostart directory '%s'" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/network_driver.c:1440 src/storage_driver.c:972 #, fuzzy, c-format msgid "Failed to create symlink '%s' to '%s'" msgstr "Cursor konnte nicht erzeugt werden" #: src/node_device.c:65 #, fuzzy, c-format msgid "Failed to refresh WWPN for host%d" msgstr "Aktualisieren des Pools fehlgeschlagen %s" #: src/node_device.c:72 #, fuzzy, c-format msgid "Failed to refresh WWNN for host%d" msgstr "Aktualisieren des Pools fehlgeschlagen %s" #: src/node_device.c:110 #, fuzzy, c-format msgid "cannot resolve driver link %s" msgstr "Programm kann nicht ausgeführt werden:" #: src/node_device.c:283 src/node_device.c:312 src/node_device.c:347 #: src/node_device.c:378 #, fuzzy, c-format msgid "no node device with matching name '%s'" msgstr "Kein Domain mit übereinstimmendem Namen" #: src/node_device.c:323 #, fuzzy msgid "no parent for this device" msgstr "Ziel des Plattengeräts" #: src/node_device.c:422 #, fuzzy, c-format msgid "Invalid vport operation (%d)" msgstr "Ungültiger Parameter für für PrintDlgEx" #: src/node_device.c:439 #, fuzzy, c-format msgid "Vport operation path is '%s'" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/node_device.c:453 #, c-format msgid "Write of '%s' to '%s' during vport create/delete failed" msgstr "" #: src/node_device.c:462 #, fuzzy msgid "Vport operation complete" msgstr "Befehlsausführung '%s' schlug fehl" #: src/node_device.c:490 msgid "Device is not a fibre channel HBA" msgstr "" #: src/node_device.c:520 #, fuzzy, c-format msgid "Could not find parent HBA for '%s'" msgstr "Konnte Ressourcendatei %s nicht finden." #: src/node_device.c:540 #, c-format msgid "Parent HBA %s is not capable of vport operations" msgstr "" #: src/node_device.c:561 #, fuzzy msgid "Could not get current time" msgstr "Kann den offiziellen Hostnamen nicht bekommen" #: src/node_device_conf.c:483 #, c-format msgid "no block device path supplied for '%s'" msgstr "" #: src/node_device_conf.c:496 #, c-format msgid "error parsing storage capabilities for '%s'" msgstr "" #: src/node_device_conf.c:506 #, c-format msgid "missing storage capability type for '%s'" msgstr "" #: src/node_device_conf.c:526 #, c-format msgid "no removable media size supplied for '%s'" msgstr "" #: src/node_device_conf.c:527 #, c-format msgid "invalid removable media size supplied for '%s'" msgstr "" #: src/node_device_conf.c:537 #, fuzzy, c-format msgid "unknown storage capability type '%s' for '%s'" msgstr "Typ des RAS-Bilds unbekannt" #: src/node_device_conf.c:549 #, fuzzy, c-format msgid "no size supplied for '%s'" msgstr "Dieses Bild-Format wird nicht unterstützt" #: src/node_device_conf.c:550 #, fuzzy, c-format msgid "invalid size supplied for '%s'" msgstr "Ungültiges Audio-Modell '%s'" #: src/node_device_conf.c:577 src/node_device_conf.c:625 #, c-format msgid "no SCSI host ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:578 src/node_device_conf.c:626 #, c-format msgid "invalid SCSI host ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:583 #, c-format msgid "no SCSI bus ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:584 #, c-format msgid "invalid SCSI bus ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:589 #, c-format msgid "no SCSI target ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:590 #, c-format msgid "invalid SCSI target ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:595 #, c-format msgid "no SCSI LUN ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:596 #, c-format msgid "invalid SCSI LUN ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:632 #, fuzzy, c-format msgid "error parsing SCSI host capabilities for '%s'" msgstr "Installiere Audio-Gerät für lokale VM" #: src/node_device_conf.c:642 #, fuzzy, c-format msgid "missing SCSI host capability type for '%s'" msgstr "Gerättypen-Feld" #: src/node_device_conf.c:664 #, fuzzy, c-format msgid "no WWNN supplied for '%s'" msgstr "Dieses Bild-Format wird nicht unterstützt" #: src/node_device_conf.c:672 #, fuzzy, c-format msgid "no WWPN supplied for '%s'" msgstr "Dieses Bild-Format wird nicht unterstützt" #: src/node_device_conf.c:680 #, fuzzy, c-format msgid "unknown SCSI host capability type '%s' for '%s'" msgstr "Typ des RAS-Bilds unbekannt" #: src/node_device_conf.c:714 #, fuzzy, c-format msgid "no network interface supplied for '%s'" msgstr "Netzwerkschnittstellentyp" #: src/node_device_conf.c:729 #, fuzzy, c-format msgid "invalid network type supplied for '%s'" msgstr "Ungültiger Verbindungszeiger in %s" #: src/node_device_conf.c:757 #, c-format msgid "no USB interface number supplied for '%s'" msgstr "" #: src/node_device_conf.c:758 #, c-format msgid "invalid USB interface number supplied for '%s'" msgstr "" #: src/node_device_conf.c:763 #, c-format msgid "no USB interface class supplied for '%s'" msgstr "" #: src/node_device_conf.c:764 #, c-format msgid "invalid USB interface class supplied for '%s'" msgstr "" #: src/node_device_conf.c:769 #, c-format msgid "no USB interface subclass supplied for '%s'" msgstr "" #: src/node_device_conf.c:770 #, c-format msgid "invalid USB interface subclass supplied for '%s'" msgstr "" #: src/node_device_conf.c:775 #, c-format msgid "no USB interface protocol supplied for '%s'" msgstr "" #: src/node_device_conf.c:776 #, fuzzy, c-format msgid "invalid USB interface protocol supplied for '%s'" msgstr "Ungültiger Verbindungszeiger in %s" #: src/node_device_conf.c:826 #, c-format msgid "no USB bus number supplied for '%s'" msgstr "" #: src/node_device_conf.c:827 #, c-format msgid "invalid USB bus number supplied for '%s'" msgstr "" #: src/node_device_conf.c:832 #, c-format msgid "no USB device number supplied for '%s'" msgstr "" #: src/node_device_conf.c:833 #, c-format msgid "invalid USB device number supplied for '%s'" msgstr "" #: src/node_device_conf.c:838 #, c-format msgid "no USB vendor ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:839 #, c-format msgid "invalid USB vendor ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:844 #, c-format msgid "no USB product ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:845 #, c-format msgid "invalid USB product ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:872 #, c-format msgid "no PCI domain ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:873 #, fuzzy, c-format msgid "invalid PCI domain ID supplied for '%s'" msgstr "ungültiger Domain-Zeiger in %s" #: src/node_device_conf.c:878 #, c-format msgid "no PCI bus ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:879 #, fuzzy, c-format msgid "invalid PCI bus ID supplied for '%s'" msgstr "Ungültiges Audio-Modell '%s'" #: src/node_device_conf.c:884 #, c-format msgid "no PCI slot ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:885 #, fuzzy, c-format msgid "invalid PCI slot ID supplied for '%s'" msgstr "Ungültiges Audio-Modell '%s'" #: src/node_device_conf.c:890 #, c-format msgid "no PCI function ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:891 #, fuzzy, c-format msgid "invalid PCI function ID supplied for '%s'" msgstr "ungültiger Verbindungszeiger in %s" #: src/node_device_conf.c:896 #, c-format msgid "no PCI vendor ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:897 #, c-format msgid "invalid PCI vendor ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:902 #, c-format msgid "no PCI product ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:903 #, c-format msgid "invalid PCI product ID supplied for '%s'" msgstr "" #: src/node_device_conf.c:938 #, c-format msgid "no system UUID supplied for '%s'" msgstr "" #: src/node_device_conf.c:944 #, fuzzy, c-format msgid "malformed uuid element for '%s'" msgstr "Element-Seitenverhältnis" #: src/node_device_conf.c:979 #, fuzzy msgid "missing capability type" msgstr "Gerättypen-Feld" #: src/node_device_conf.c:985 #, fuzzy, c-format msgid "unknown capability type '%s'" msgstr "Unbekannter Gerät-Typ '%s'" #: src/node_device_conf.c:1019 #, fuzzy, c-format msgid "unknown capability type '%d' for '%s'" msgstr "Dieses Bild-Format wird nicht unterstützt" #: src/node_device_conf.c:1066 #, fuzzy, c-format msgid "no device capabilities for '%s'" msgstr "Installiere Audio-Gerät für lokale VM" #: src/node_device_hal_linux.c:53 #, fuzzy, c-format msgid "Opened WWN path '%s' for reading" msgstr "Öffnen von %s zu Lesezwecken schlug fehl" #: src/node_device_hal_linux.c:56 #, fuzzy, c-format msgid "Failed to open WWN path '%s' for reading" msgstr "Öffnen von %s zu Lesezwecken schlug fehl" #: src/node_device_hal_linux.c:79 #, fuzzy, c-format msgid "Failed to read WWN for host%d '%s'" msgstr "Konnte Daten nicht aus der Zwischenablage kopieren" #: src/node_device_hal_linux.c:117 #, c-format msgid "Checking if host%d is an FC HBA" msgstr "" #: src/node_device_hal_linux.c:137 #, fuzzy, c-format msgid "Failed to read WWPN for host%d" msgstr "Konnte Daten nicht aus der Zwischenablage kopieren" #: src/node_device_hal_linux.c:146 #, fuzzy, c-format msgid "Failed to read WWNN for host%d" msgstr "Konnte Daten nicht aus der Zwischenablage kopieren" #: src/nodeinfo.c:82 #, fuzzy msgid "parsing cpuinfo processor" msgstr "Erwartete '*' beim Parsen der Ressource." #: src/nodeinfo.c:94 msgid "parsing cpuinfo cpu MHz" msgstr "" #: src/nodeinfo.c:121 #, fuzzy msgid "no cpus found" msgstr "Keine Einträge gefunden." #: src/nodeinfo.c:159 src/qemu_driver.c:1820 src/uml_driver.c:1758 #: src/util.c:352 #, fuzzy, c-format msgid "cannot open %s" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/nodeinfo.c:175 #, fuzzy msgid "node info not implemented on this platform" msgstr "%s: nicht implementiert\n" #: src/nodeinfo.c:257 src/nodeinfo.c:294 msgid "NUMA not supported on this host" msgstr "NUMA wird auf diesem Rechner nicht unterstützt" #: src/nodeinfo.c:263 #, c-format msgid "start cell %d out of range (0-%d)" msgstr "" #: src/nodeinfo.c:275 src/nodeinfo.c:302 #, fuzzy msgid "Failed to query NUMA free memory" msgstr "NUMA freier Speicher" #: src/nodeinfo.c:323 src/nodeinfo.c:330 msgid "NUMA memory information not available on this platform" msgstr "" #: src/opennebula/one_conf.c:150 msgid "Error submitting virtual machine to OpenNebula" msgstr "" #: src/opennebula/one_driver.c:335 src/test.c:320 src/test.c:1362 #: src/test.c:2131 src/test.c:2186 msgid "getting time of day" msgstr "Tageszeit ermitteln" #: src/opennebula/one_driver.c:462 #, c-format msgid "Already an OpenNebula VM active with the name: '%s' id: %d " msgstr "" #: src/opennebula/one_driver.c:509 src/opennebula/one_driver.c:545 #: src/opennebula/one_driver.c:580 src/opennebula/one_driver.c:613 #, fuzzy msgid "Wrong state to perform action" msgstr "Fehler beim Anlegen des Datenträgers: %s" #: src/opennebula/one_driver.c:584 src/qemu_driver.c:3106 #: src/qemu_driver.c:3156 src/qemu_driver.c:3206 src/qemu_driver.c:3242 #: src/qemu_driver.c:3688 src/qemu_driver.c:3847 src/qemu_driver.c:6441 #: src/qemu_driver.c:6580 src/qemu_driver.c:6720 src/qemu_driver.c:7063 #: src/xen_internal.c:1088 src/xen_internal.c:1168 src/xen_internal.c:1271 msgid "domain is not running" msgstr "Domain läuft nicht" #: src/opennebula/one_driver.c:587 src/opennebula/one_driver.c:620 #: src/qemu_driver.c:2878 src/uml_driver.c:1234 src/uml_driver.c:1264 #: src/vbox/vbox_tmpl.c:795 #, c-format msgid "no domain with matching id %d" msgstr "Keine Domain mit übereinstimmender ID %d" #: src/opennebula/one_driver.c:617 #, fuzzy msgid "domain is not paused " msgstr "Konsole nicht verfügbar während Pause" #: src/openvz_conf.c:131 #, fuzzy msgid "Could not extract vzctl version" msgstr "Kann laufende %s Hypervisorversion nicht ermitteln\n" #: src/openvz_conf.c:198 #, fuzzy, c-format msgid "Could not read 'IP_ADDRESS' from config for container %d" msgstr "kann Konfiguration nicht entfernen für %s" #: src/openvz_conf.c:230 #, fuzzy, c-format msgid "Could not read 'NETIF' from config for container %d" msgstr "kann Konfiguration nicht entfernen für %s" #: src/openvz_conf.c:257 #, fuzzy msgid "Too long network device name" msgstr "Netzwerk-Dateinamen auflösen" #: src/openvz_conf.c:271 msgid "Too long bridge device name" msgstr "" #: src/openvz_conf.c:285 #, fuzzy msgid "Wrong length MAC address" msgstr "ungültige MAC-Adresse" #: src/openvz_conf.c:292 #, fuzzy msgid "Wrong MAC address" msgstr "MAC-Adressen-Feld" #: src/openvz_conf.c:359 #, fuzzy, c-format msgid "Could not read 'OSTEMPLATE' from config for container %d" msgstr "kann Konfiguration nicht entfernen für %s" #: src/openvz_conf.c:373 #, fuzzy, c-format msgid "Could not read 'VE_PRIVATE' from config for container %d" msgstr "kann Konfiguration nicht entfernen für %s" #: src/openvz_conf.c:434 msgid "popen failed" msgstr "popen fehlgeschlagen" #: src/openvz_conf.c:444 #, fuzzy msgid "Failed to parse vzlist output" msgstr "Umleitung des Ein/Ausgabe des Unterprozesses gescheitert" #: src/openvz_conf.c:477 #, fuzzy msgid "UUID in config file malformed" msgstr "Ungültiges tsflag in Konfigurationsdatei: %s" #: src/openvz_conf.c:489 #, fuzzy, c-format msgid "Could not read config for container %d" msgstr "kann Konfiguration nicht entfernen für %s" #: src/openvz_driver.c:110 #, fuzzy msgid "Container is not defined" msgstr "'%s' ist keine gültige POT-Datei." #: src/openvz_driver.c:152 src/openvz_driver.c:656 #, fuzzy, c-format msgid "Could not put argument to %s" msgstr "Kann Daten nicht ins Fenster übertragen." #: src/openvz_driver.c:170 #, fuzzy msgid "only one filesystem supported" msgstr "Ungültiger Dateisystem-Typ" #: src/openvz_driver.c:179 msgid "filesystem is not of type 'template' or 'mount'" msgstr "" #: src/openvz_driver.c:190 #, fuzzy msgid "Could not convert domain name to VEID" msgstr "Einen Domain-Namen oder -ID in Domain-UUID konvertieren" #: src/openvz_driver.c:196 msgid "Could not copy default config" msgstr "" #: src/openvz_driver.c:202 msgid "Could not set the source dir for the filesystem" msgstr "" #: src/openvz_driver.c:210 msgid "Error creating command for container" msgstr "" #: src/openvz_driver.c:216 src/openvz_driver.c:643 src/openvz_driver.c:827 #: src/openvz_driver.c:882 src/openvz_driver.c:920 src/openvz_driver.c:956 #: src/openvz_driver.c:1034 src/openvz_driver.c:1188 src/openvz_driver.c:1239 #, fuzzy, c-format msgid "Could not exec %s" msgstr "Konnte nicht %s in %s extrahieren: %s" #: src/openvz_driver.c:361 #, fuzzy, c-format msgid "cannot read cputime for domain %d" msgstr "Kann keine aktive DFÜ-Verbindung finden: %s" #: src/openvz_driver.c:440 src/openvz_driver.c:477 #, fuzzy msgid "domain is not in running state" msgstr "Domain läuft nicht" #: src/openvz_driver.c:557 msgid "Container ID is not specified" msgstr "" #: src/openvz_driver.c:590 msgid "Could not generate eth name for container" msgstr "" #: src/openvz_driver.c:601 msgid "Could not generate veth name" msgstr "" #: src/openvz_driver.c:685 #, fuzzy msgid "Could not configure network" msgstr "Die Netzwerkadresse wurde nicht verstanden" #: src/openvz_driver.c:696 #, fuzzy msgid "cannot replace NETIF config" msgstr "" "Die Bezeichnung des Konfigurations-Eintrags kann nicht mit %c beginnen." #: src/openvz_driver.c:733 #, c-format msgid "Already an OPENVZ VM active with the id '%s'" msgstr "" #: src/openvz_driver.c:743 src/openvz_driver.c:810 #, fuzzy msgid "Error creating intial configuration" msgstr "Fehler beim Erzeugen des virtuellen Netzwerkes: %s" #: src/openvz_driver.c:751 src/openvz_driver.c:816 #, fuzzy msgid "Could not set UUID" msgstr "Konnte nicht %s in %s extrahieren: %s" #: src/openvz_driver.c:761 src/openvz_driver.c:838 #, fuzzy msgid "Could not set number of virtual cpu" msgstr "Anzahl der virtuellen CPUs ändern" #: src/openvz_driver.c:800 #, c-format msgid "Already an OPENVZ VM defined with the id '%s'" msgstr "" #: src/openvz_driver.c:869 msgid "no domain with matching id" msgstr "Keine Domain mit übereinstimmender ID" #: src/openvz_driver.c:875 #, fuzzy msgid "domain is not in shutoff state" msgstr "Domain läuft nicht" #: src/openvz_driver.c:987 #, fuzzy msgid "Could not read container config" msgstr "Konnte semanage-Verbindung nicht herstellen" #: src/openvz_driver.c:1008 src/qemu_driver.c:2768 #, c-format msgid "unknown type '%s'" msgstr "Unbekannter Typ '%s'" #: src/openvz_driver.c:1060 #, fuzzy msgid "VCPUs should be >= 1" msgstr "'%s' sollte numerisch sein." #: src/openvz_driver.c:1105 #, c-format msgid "unexpected OpenVZ URI path '%s', try openvz:///system" msgstr "" #: src/openvz_driver.c:1112 msgid "OpenVZ control file /proc/vz does not exist" msgstr "" #: src/openvz_driver.c:1118 msgid "OpenVZ control file /proc/vz is not accessible" msgstr "" #: src/openvz_driver.c:1197 src/openvz_driver.c:1248 #, fuzzy, c-format msgid "Could not parse VPS ID %s" msgstr "Konnte Seite für ID nicht finden" #: src/pci.c:148 #, fuzzy, c-format msgid "Failed to open config space file '%s': %s" msgstr "Öffnen der PID-Datei fehlgeschlagen '%s' : %s" #: src/pci.c:168 #, fuzzy, c-format msgid "Failed to read from '%s' : %s" msgstr "Konnte Daten nicht aus der Zwischenablage kopieren" #: src/pci.c:208 #, fuzzy, c-format msgid "Failed to write to '%s' : %s" msgstr "Konnte Sperr-Datei '%s' nicht schreiben" #: src/pci.c:471 #, c-format msgid "Active %s devices on bus with %s, not doing bus reset" msgstr "" #: src/pci.c:480 #, fuzzy, c-format msgid "Failed to find parent device for %s" msgstr "Fehler beim Lösen des Geräts von %s" #: src/pci.c:493 src/pci.c:539 #, fuzzy, c-format msgid "Failed to save PCI config space for %s" msgstr "Öffnen der PID-Datei fehlgeschlagen '%s' : %s" #: src/pci.c:513 src/pci.c:559 #, fuzzy, c-format msgid "Failed to restore PCI config space for %s" msgstr "Öffnen der PID-Datei fehlgeschlagen '%s' : %s" #: src/pci.c:572 #, fuzzy, c-format msgid "Failed to open config space file '%s'" msgstr "Öffnen der PID-Datei fehlgeschlagen '%s' : %s" #: src/pci.c:594 #, fuzzy, c-format msgid "Not resetting active device %s" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/pci.c:621 #, fuzzy, c-format msgid "Unable to reset PCI device %s: %s" msgstr "NAT für das physikalische Gerät %s" #: src/pci.c:623 msgid "no FLR, PM reset or bus reset available" msgstr "" #: src/pci.c:677 #, fuzzy, c-format msgid "failed to load pci-stub or pciback drivers: %s" msgstr "Netzwerk wurde nicht gefunden: %s" #: src/pci.c:706 #, fuzzy, c-format msgid "Failed to add PCI device ID '%s' to %s" msgstr "Speichern der Domain %s nach %s gescheitert" #: src/pci.c:719 #, fuzzy, c-format msgid "Failed to unbind PCI device '%s'" msgstr "" "Fehler beim Erstellen eines Sockets für die Datenübertragungen, Aktion " "abgebrochen" #: src/pci.c:732 #, fuzzy, c-format msgid "Failed to add slot for PCI device '%s' to %s" msgstr "Verzeichnis konnte nicht gewechselt werden" #: src/pci.c:740 src/pci.c:787 #, fuzzy, c-format msgid "Failed to bind PCI device '%s' to %s" msgstr "" "Fehler beim Erstellen eines Sockets für die Datenübertragungen, Aktion " "abgebrochen" #: src/pci.c:752 #, fuzzy, c-format msgid "Failed to remove PCI ID '%s' from %s" msgstr "Es konnte nicht aus der Datei »%s« gelesen werden: %s" #: src/pci.c:766 src/pci.c:827 msgid "cannot find any PCI stub module" msgstr "" #: src/pci.c:797 #, fuzzy, c-format msgid "Failed to remove slot for PCI device '%s' to %s" msgstr "Schreiben in die PID-Datei fehlgeschlagen '%s' : %s" #: src/pci.c:812 #, fuzzy, c-format msgid "Failed to trigger a re-probe for PCI device '%s'" msgstr "Fehler beim Parsen der Adresse '%s'\n" #: src/pci.c:890 #, fuzzy, c-format msgid "Failed to read product/vendor ID for %s" msgstr "Erzeugen eines Pools aus %s fehlgeschlagen" #: src/pci.c:969 #, fuzzy, c-format msgid "Device %s is already in use" msgstr "" "Fehler beim Wiederherstellen der Domain '%s'. Läuft die Domain bereits?" #: src/phyp/phyp_driver.c:87 msgid "Missing server name in phyp:// URI" msgstr "" #: src/phyp/phyp_driver.c:94 msgid "Missing path name in phyp:// URI" msgstr "" #: src/phyp/phyp_driver.c:118 msgid "Error parsing 'path'. Invalid characters." msgstr "" #: src/phyp/phyp_driver.c:125 #, fuzzy msgid "Error while opening SSH session." msgstr "Fehler während des Neuladen der Treiber" #: src/phyp/phyp_driver.c:186 #, fuzzy, c-format msgid "Error while getting %s address info" msgstr "Fehler während des Neuladen der Treiber" #: src/phyp/phyp_driver.c:205 #, fuzzy, c-format msgid "Failed to connect to %s" msgstr "Kann GTK nicht initialisieren: " #: src/phyp/phyp_driver.c:226 #, fuzzy msgid "Failure establishing SSH session." msgstr "Fehler während des Neuladen der Treiber" #: src/phyp/phyp_driver.c:250 #, fuzzy msgid "No authentication callback provided." msgstr "Authentifikation gescheitert" #: src/phyp/phyp_driver.c:262 #, fuzzy msgid "Required credentials are not supported." msgstr "Laufwerkspools werden im Moment icht unterstützt" #: src/phyp/phyp_driver.c:272 #, fuzzy msgid "Unable to fetch credentials." msgstr "" "Der Versuch eines Clients, eine Verbindung herzustellen, ist gescheitert." #: src/phyp/phyp_driver.c:281 #, fuzzy msgid "Unable to get password certificates" msgstr "Kann GTK nicht initialisieren: " #: src/phyp/phyp_driver.c:295 #, fuzzy msgid "Authentication failed" msgstr "Authentifikation gescheitert" #: src/proxy_internal.c:240 #, c-format msgid "Failed to close socket %d\n" msgstr "Schliessen des Sockets %d scheiterte\n" #: src/proxy_internal.c:297 #, c-format msgid "Failed to write to socket %d\n" msgstr "Schreiben des Sockets %d scheiterte\n" #: src/proxy_internal.c:379 #, fuzzy msgid "failed to write proxy request" msgstr "Konnte Sperr-Datei '%s' nicht schreiben" #: src/proxy_internal.c:390 src/proxy_internal.c:413 #, fuzzy msgid "failed to read proxy reply" msgstr "Konnte keine PID von Sperr-Datei lesen." #: src/proxy_internal.c:395 src/proxy_internal.c:418 src/proxy_internal.c:436 #, c-format msgid "Communication error with proxy: got %d bytes of %d\n" msgstr "Kommunikationsfehler mit dem Proxy: erhielt %d Bytes von %d\n" #: src/proxy_internal.c:402 #, c-format msgid "Communication error with proxy: expected %d bytes got %d\n" msgstr "Kommunikationsfehler mit dem Proxy: erwartete %d Bytes, erhielt %d\n" #: src/proxy_internal.c:426 #, c-format msgid "Communication error with proxy: got %d bytes packet\n" msgstr "Kommunikationsfehler mit dem Proxy: erhielt %d Bytes Paket\n" #: src/proxy_internal.c:448 msgid "Communication error with proxy: malformed packet\n" msgstr "Kommunikationsfehler mit dem Proxy: fehlerhaftes Paket\n" #: src/proxy_internal.c:452 #, c-format msgid "got asynchronous packet number %d\n" msgstr "erhielt asynchrone Paketnummer %d\n" #: src/qemu_conf.c:119 #, fuzzy msgid "unable to find hugetlbfs mountpoint" msgstr "Konnte nicht die Zugriffsrechte der Datei '%s' ermitteln" #: src/qemu_conf.c:246 src/qemu_conf.c:284 msgid "cgroup_device_acl must be a list of strings" msgstr "" #: src/qemu_conf.c:463 #, fuzzy msgid "Unable to read 'qemu -M ?' output" msgstr "Umleitung des Ein/Ausgabe des Unterprozesses gescheitert" #: src/qemu_conf.c:483 src/qemu_conf.c:1002 #, c-format msgid "Unexpected exit status from qemu %d pid %lu" msgstr "" #: src/qemu_conf.c:491 src/qemu_conf.c:1010 #, c-format msgid "Unexpected exit status '%d', qemu probably failed" msgstr "" #: src/qemu_conf.c:620 #, fuzzy, c-format msgid "Failed to stat %s, most peculiar : %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/qemu_conf.c:945 #, fuzzy, c-format msgid "cannot parse QEMU version number in '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/qemu_conf.c:978 #, fuzzy msgid "Unable to read QEMU help output" msgstr "Umleitung des Ein/Ausgabe des Unterprozesses gescheitert" #: src/qemu_conf.c:1050 #, fuzzy, c-format msgid "Cannot find QEMU binary %s: %s" msgstr "Kann keinen Font-Knoten '%s' finden." #: src/qemu_conf.c:1091 #, fuzzy, c-format msgid "Network type %d is not supported" msgstr "Die DHCP-Startadresse entspricht nicht dem Netzwerk %s" #: src/qemu_conf.c:1122 src/uml_conf.c:133 #, fuzzy, c-format msgid "Failed to add tap interface to bridge. %s is not a bridge device" msgstr "%s: konnte Satz nicht anhängen: %s\n" #: src/qemu_conf.c:1126 src/uml_conf.c:137 #, fuzzy, c-format msgid "Failed to add tap interface to bridge '%s'" msgstr "%s: konnte Satz nicht anhängen: %s\n" #: src/qemu_conf.c:1130 src/uml_conf.c:141 #, fuzzy, c-format msgid "Failed to add tap interface '%s' to bridge '%s'" msgstr "%s: konnte Satz nicht anhängen: %s\n" #: src/qemu_conf.c:1422 #, fuzzy, c-format msgid "driver serial '%s' contains unsafe characters" msgstr "Modell-Name enthält ungültige Zeichen" #: src/qemu_conf.c:1471 #, fuzzy msgid "TCP migration is not supported with this QEMU binary" msgstr "Diese Funktion wird vom Hypervisor nicht unterstützt" #: src/qemu_conf.c:1479 src/qemu_conf.c:1485 msgid "STDIO migration is not supported with this QEMU binary" msgstr "" #: src/qemu_conf.c:1641 msgid "hugetlbfs filesystem is not mounted" msgstr "" #: src/qemu_conf.c:1646 msgid "hugepages are disabled by administrator config" msgstr "" #: src/qemu_conf.c:1651 #, fuzzy, c-format msgid "hugepage backing not supported by '%s'" msgstr "Nicht unterstützter Laufwerkstyp %s" #: src/qemu_conf.c:1751 #, fuzzy, c-format msgid "unsupported driver name '%s' for disk '%s'" msgstr "Nicht unterstütztes Format in der Zwischenablage." #: src/qemu_conf.c:1791 src/qemu_conf.c:1868 #, fuzzy, c-format msgid "unsupported usb disk type for '%s'" msgstr "Nicht unterstützter Laufwerkstyp %s" #: src/qemu_conf.c:1799 src/qemu_conf.c:1887 src/uml_conf.c:477 #, c-format msgid "unsupported disk type '%s'" msgstr "Nicht unterstützter Laufwerkstyp %s" #: src/qemu_conf.c:2071 #, fuzzy msgid "only one video card is currently supported" msgstr "Ungültiger Dateisystem-Typ" #: src/qemu_conf.c:2082 src/qemu_conf.c:2108 #, fuzzy, c-format msgid "video type %s is not supported with QEMU" msgstr "Die DHCP-Startadresse entspricht nicht dem Netzwerk %s" #: src/qemu_conf.c:2128 msgid "invalid sound model" msgstr "Ungültiges Audio-Modell" #: src/qemu_conf.c:2173 src/qemu_driver.c:5538 #, fuzzy msgid "PCI device assignment is not supported by this version of qemu" msgstr "Gzip wird nicht für diese zlib Version unterstützt" #: src/qemu_conf.c:2386 #, fuzzy, c-format msgid "malformed keyword arguments in '%s'" msgstr "Element-Seitenverhältnis" #: src/qemu_conf.c:2519 #, fuzzy, c-format msgid "cannot parse drive index '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/qemu_conf.c:2528 #, fuzzy, c-format msgid "missing file parameter in drive '%s'" msgstr "fehlende Geräteinformationen für %s" #: src/qemu_conf.c:2535 #, c-format msgid "missing index parameter in drive '%s'" msgstr "" #: src/qemu_conf.c:2595 #, fuzzy, c-format msgid "cannot parse NIC vlan in '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/qemu_conf.c:2607 #, fuzzy, c-format msgid "cannot find NIC definition for vlan %d" msgstr "Fehler beim Lösen des Geräts von %s" #: src/qemu_conf.c:2666 #, fuzzy, c-format msgid "cannot parse vlan in '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/qemu_conf.c:2696 #, fuzzy, c-format msgid "cannot parse NIC definition '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/qemu_conf.c:2760 src/qemu_conf.c:2818 #, fuzzy, c-format msgid "unknown PCI device syntax '%s'" msgstr "Typ des RAS-Bilds unbekannt" #: src/qemu_conf.c:2768 src/qemu_conf.c:2841 #, fuzzy, c-format msgid "cannot extract PCI device bus '%s'" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/qemu_conf.c:2775 #, fuzzy, c-format msgid "cannot extract PCI device slot '%s'" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/qemu_conf.c:2782 #, fuzzy, c-format msgid "cannot extract PCI device function '%s'" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/qemu_conf.c:2827 #, fuzzy, c-format msgid "cannot extract USB device vendor '%s'" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/qemu_conf.c:2834 #, fuzzy, c-format msgid "cannot extract PCI device product '%s'" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/qemu_conf.c:2848 #, fuzzy, c-format msgid "cannot extract PCI device address '%s'" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/qemu_conf.c:2949 #, fuzzy, c-format msgid "cannot find port number in character device %s" msgstr "Der Pfad '%s' enthält zu viele \"..\"." #: src/qemu_conf.c:2985 #, fuzzy, c-format msgid "unknown character device syntax %s" msgstr "Typ des RAS-Bilds unbekannt" #: src/qemu_conf.c:3019 #, fuzzy msgid "no emulator path found" msgstr "Emulator-Pfad zu lang" #: src/qemu_conf.c:3071 #, fuzzy, c-format msgid "missing value for %s argument" msgstr "Zeile %d, Spalte %d: fehlendes Attribut »%s" #: src/qemu_conf.c:3116 #, fuzzy, c-format msgid "cannot parse VNC port '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/qemu_conf.c:3140 #, fuzzy, c-format msgid "cannot parse memory level '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/qemu_conf.c:3149 #, fuzzy, c-format msgid "cannot parse CPU count '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/qemu_conf.c:3157 #, fuzzy, c-format msgid "cannot parse UUID '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/qemu_conf.c:3402 #, fuzzy, c-format msgid "unknown video adapter type '%s'" msgstr "Unbekannter Gerät-Typ '%s'" #: src/qemu_conf.c:3422 #, c-format msgid "unknown QEMU argument '%s' during conversion" msgstr "" #: src/qemu_conf.c:3425 #, fuzzy, c-format msgid "unknown argument '%s'" msgstr "Unbekannter Auth-Typ '%s'" #: src/qemu_driver.c:179 src/qemu_driver.c:211 src/uml_driver.c:799 #, fuzzy, c-format msgid "failed to create logfile %s" msgstr "Cursor konnte nicht erzeugt werden" #: src/qemu_driver.c:185 src/qemu_driver.c:217 src/uml_driver.c:808 #, fuzzy msgid "Unable to set VM logfile close-on-exec flag" msgstr "Konnte Zwischenablage nicht schliessen." #: src/qemu_driver.c:203 #, fuzzy, c-format msgid "failed to build logfile name %s/%s.log" msgstr "Datei »%s« konnte nicht angelegt werden: %s" #: src/qemu_driver.c:223 #, fuzzy, c-format msgid "Unable to seek to %lld in %s" msgstr "Konnte Zwischenablage nicht schließen." #: src/qemu_driver.c:296 #, fuzzy, c-format msgid "Failed to unlink status file %s" msgstr "Fehler beim Zugriff auf Sperr-Datei." #: src/qemu_driver.c:327 #, fuzzy, c-format msgid "Failed to reconnect monitor for %s: %d\n" msgstr "Konnte Zugriffszeit von Datei '%s' nicht ändern" #: src/qemu_driver.c:393 #, fuzzy, c-format msgid "Failed to copy secModel model: %s" msgstr "Kopieren des Registry-Werts '%s' gescheitert" #: src/qemu_driver.c:401 #, fuzzy, c-format msgid "Failed to copy secModel DOI: %s" msgstr "Kopieren des Registry-Werts '%s' gescheitert" #: src/qemu_driver.c:422 #, fuzzy msgid "Failed to start security driver" msgstr "Netzwerk wurde nicht gefunden" #: src/qemu_driver.c:427 #, fuzzy msgid "No security driver available" msgstr "Keine Möglickeit mit XBM umzugehen!" #: src/qemu_driver.c:526 #, fuzzy, c-format msgid "Failed to create state dir '%s': %s\n" msgstr "Erstellung des DDE-Zeichenkette gescheitert" #: src/qemu_driver.c:532 #, fuzzy, c-format msgid "Failed to create lib dir '%s': %s\n" msgstr "Erstellung des DDE-Zeichenkette gescheitert" #: src/qemu_driver.c:538 #, fuzzy, c-format msgid "Failed to create cache dir '%s': %s\n" msgstr "Erstellung des DDE-Zeichenkette gescheitert" #: src/qemu_driver.c:578 #, fuzzy, c-format msgid "unable to set ownership of '%s' to user %d:%d" msgstr "%s: nicht implementiert\n" #: src/qemu_driver.c:584 #, fuzzy, c-format msgid "unable to set ownership of '%s' to %d:%d" msgstr "%s: nicht implementiert\n" #: src/qemu_driver.c:609 #, fuzzy, c-format msgid "unable to create hugepage path %s" msgstr "Konnte keinen Registrierungs-Eintrag für '%s'-Dateien erstellen." #: src/qemu_driver.c:616 #, fuzzy, c-format msgid "unable to set ownership on %s to %d:%d" msgstr "%s: nicht implementiert\n" #: src/qemu_driver.c:816 src/qemu_driver.c:829 src/qemu_driver.c:840 #, c-format msgid "Failure while reading %s startup output" msgstr "" #: src/qemu_driver.c:824 #, c-format msgid "Timed out while reading %s startup output" msgstr "" #: src/qemu_driver.c:858 #, c-format msgid "Out of space while reading %s startup output" msgstr "" #: src/qemu_driver.c:895 #, fuzzy, c-format msgid "Failure while reading %s log output" msgstr "C-Header-Datei ausgeben" #: src/qemu_driver.c:904 #, fuzzy, c-format msgid "Out of space while reading %s log output" msgstr "C-Header-Datei ausgeben" #: src/qemu_driver.c:911 #, fuzzy, c-format msgid "Process exited while reading %s log output" msgstr "C-Header-Datei ausgeben" #: src/qemu_driver.c:924 #, fuzzy, c-format msgid "Timed out while reading %s log output" msgstr "C-Header-Datei ausgeben" #: src/qemu_driver.c:954 msgid "Unable to set monitor close-on-exec flag" msgstr "" #: src/qemu_driver.c:959 msgid "Unable to put monitor into non-blocking mode" msgstr "" #: src/qemu_driver.c:1002 #, fuzzy msgid "failed to create socket" msgstr "Erzeugen eines Socket fehlgeschlagen" #: src/qemu_driver.c:1023 #, fuzzy msgid "failed to connect to monitor socket" msgstr "Verbindung fehlgeschlagen : Es fehlt der Username bzw. das Passwort" #: src/qemu_driver.c:1030 #, fuzzy msgid "monitor socket did not show up." msgstr "Fehler beim Beziehen der Domain-Details: %s" #: src/qemu_driver.c:1055 #, fuzzy, c-format msgid "Unable to open monitor path %s" msgstr "Das angeforderte HTML-Dokument konnte nicht geöffnet werden: %s" #: src/qemu_driver.c:1086 #, fuzzy, c-format msgid "unable to handle monitor type: %s" msgstr "Das angeforderte HTML-Dokument konnte nicht geöffnet werden: %s" #: src/qemu_driver.c:1192 #, fuzzy, c-format msgid "Unable to close logfile: %s\n" msgstr "Konnte Zwischenablage nicht schließen." #: src/qemu_driver.c:1199 #, fuzzy, c-format msgid "unable to start guest: %s" msgstr "Kann GTK nicht initialisieren: " #: src/qemu_driver.c:1235 msgid "cannot run monitor command to fetch CPU thread info" msgstr "" #: src/qemu_driver.c:1339 #, fuzzy msgid "failed to set CPU affinity" msgstr "Konnte Dateien nicht in die Zwischenablage kopieren." #: src/qemu_driver.c:1349 src/qemu_driver.c:3162 src/qemu_driver.c:7217 #, fuzzy msgid "resume operation failed" msgstr "Befehlsausführung '%s' schlug fehl" #: src/qemu_driver.c:1382 #, fuzzy msgid "setting VNC password failed" msgstr "Verbindung fehlgeschlagen : Es fehlt der Username bzw. das Passwort" #: src/qemu_driver.c:1566 #, fuzzy, c-format msgid "Failed to allocate pciDeviceList: %s\n" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/qemu_driver.c:1582 #, fuzzy, c-format msgid "Failed to reset PCI device: %s\n" msgstr "NAT für das physikalische Gerät %s" #: src/qemu_driver.c:1591 #, fuzzy, c-format msgid "Failed to re-attach PCI device: %s\n" msgstr "Fehler beim Anhängen des Geräts von %s" #: src/qemu_driver.c:1627 #, fuzzy, c-format msgid "Unable to create cgroup for %s" msgstr "Konnte keinen Registrierungs-Eintrag für '%s'-Dateien erstellen." #: src/qemu_driver.c:1641 #, fuzzy, c-format msgid "Unable to deny all devices for %s" msgstr "Fehler beim Lösen des Geräts von %s" #: src/qemu_driver.c:1654 #, fuzzy, c-format msgid "Unable to allow device %s for %s" msgstr "Fehler beim Anhängen des Geräts von %s" #: src/qemu_driver.c:1663 #, fuzzy msgid "unable to allow /dev/pts/ devices" msgstr "Auflistung inaktiver Domains schlug fehl" #: src/qemu_driver.c:1671 #, fuzzy msgid "unable to allow /dev/snd/ devices" msgstr "Auflistung inaktiver Domains schlug fehl" #: src/qemu_driver.c:1682 src/qemu_driver.c:5698 #, fuzzy, c-format msgid "unable to allow device %s" msgstr "NAT für das physikalische Gerät %s" #: src/qemu_driver.c:1715 src/qemu_driver.c:5689 #, fuzzy, c-format msgid "Unable to find cgroup for %s\n" msgstr "Konnte nicht die Zugriffsrechte der Datei '%s' ermitteln" #: src/qemu_driver.c:1738 #, fuzzy, c-format msgid "unable to find cgroup for domain %s" msgstr "Konnte nicht die Zugriffsrechte der Datei '%s' ermitteln" #: src/qemu_driver.c:1746 #, fuzzy, c-format msgid "unable to add domain %s task %d to cgroup" msgstr "Markierung der Domain %s als automatisch zu starten gescheitert" #: src/qemu_driver.c:1790 src/qemu_driver.c:1837 src/qemu_driver.c:1891 #, fuzzy, c-format msgid "cannot set ownership on %s" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/qemu_driver.c:1875 #, fuzzy msgid "unable to set host device ownership on this platform" msgstr "%s: nicht implementiert\n" #: src/qemu_driver.c:1988 #, fuzzy msgid "Failed to set security label" msgstr "Konnte Dateien nicht in die Zwischenablage kopieren." #: src/qemu_driver.c:2001 #, fuzzy, c-format msgid "cannot change to '%d' group" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/qemu_driver.c:2009 #, fuzzy, c-format msgid "cannot change to '%d' user" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/qemu_driver.c:2066 src/uml_driver.c:763 msgid "VM is already active" msgstr "VM ist bereits aktiv" #: src/qemu_driver.c:2087 msgid "Unable to find an unused VNC port" msgstr "" #: src/qemu_driver.c:2095 src/uml_driver.c:785 #, fuzzy, c-format msgid "cannot create log directory %s" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/qemu_driver.c:2111 src/qemu_driver.c:4593 #, fuzzy, c-format msgid "Cannot find QEMU binary %s" msgstr "Kann keinen Font-Knoten '%s' finden." #: src/qemu_driver.c:2137 #, fuzzy, c-format msgid "Cannot remove stale PID file for %s" msgstr "kann Konfiguration nicht entfernen für %s" #: src/qemu_driver.c:2144 #, fuzzy msgid "Failed to build pidfile path." msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/qemu_driver.c:2157 src/qemu_driver.c:2160 #, fuzzy, c-format msgid "Unable to write envv to logfile: %s\n" msgstr "Fehler beim Schreiben der Log-Datei" #: src/qemu_driver.c:2167 src/qemu_driver.c:2170 src/qemu_driver.c:2175 #, fuzzy, c-format msgid "Unable to write argv to logfile: %s\n" msgstr "Fehler beim Schreiben der Log-Datei" #: src/qemu_driver.c:2179 #, fuzzy, c-format msgid "Unable to seek to end of logfile: %s\n" msgstr "Konnte Zwischenablage nicht schließen." #: src/qemu_driver.c:2196 #, fuzzy, c-format msgid "Domain %s didn't show up\n" msgstr "Fehler beim Beziehen der Domain-Details: %s" #: src/qemu_driver.c:2271 #, fuzzy, c-format msgid "Shutting down VM '%s'\n" msgstr "Fehler beim Herunterfahren der Domain: %s" #: src/qemu_driver.c:2276 #, fuzzy, c-format msgid "Failed to send SIGTERM to %s (%d)" msgstr "Versuch gescheitert, eine DDE-Benachrichtigung zu schicken" #: src/qemu_driver.c:2326 #, fuzzy, c-format msgid "Failed to remove domain status for %s" msgstr "Wiederherstellen der Domain aus %s gescheitert" #: src/qemu_driver.c:2331 #, fuzzy, c-format msgid "Failed to remove PID file for %s: %s" msgstr "Es konnte nicht aus der Datei »%s« gelesen werden: %s" #: src/qemu_driver.c:2379 #, c-format msgid "unhandled fd event %d for %s" msgstr "" #: src/qemu_driver.c:2680 #, fuzzy msgid "qemu state driver is not active" msgstr "Speicher-Pool ist nicht aktiv" #: src/qemu_driver.c:2688 #, c-format msgid "unexpected QEMU URI path '%s', try qemu:///system" msgstr "" #: src/qemu_driver.c:2695 #, c-format msgid "unexpected QEMU URI path '%s', try qemu:///session" msgstr "" #: src/qemu_driver.c:2741 #, fuzzy, c-format msgid "Unable to open %s" msgstr "Konnte '%s' nicht für %s öffnen." #: src/qemu_driver.c:2930 src/qemu_driver.c:7201 #, fuzzy, c-format msgid "no domain with matching name '%s'" msgstr "Kein Domain mit übereinstimmendem Namen" #: src/qemu_driver.c:3112 src/qemu_driver.c:3697 msgid "suspend operation failed" msgstr "Suspend-Operation gescheitert" #: src/qemu_driver.c:3212 src/uml_driver.c:1241 msgid "shutdown operation failed" msgstr "Herunterfahren-Operation gescheitert" #: src/qemu_driver.c:3337 src/uml_driver.c:1353 msgid "cannot set max memory lower than current memory" msgstr "" #: src/qemu_driver.c:3370 #, fuzzy msgid "could not query memory balloon allocation" msgstr "Speicherzuweisung ändern" #: src/qemu_driver.c:3381 #, fuzzy msgid "could not parse memory balloon allocation" msgstr "Konnte semanage-Verbindung nicht herstellen" #: src/qemu_driver.c:3420 #, fuzzy msgid "could not balloon memory allocation" msgstr "Speicherzuweisung ändern" #: src/qemu_driver.c:3460 src/uml_driver.c:1392 msgid "cannot set memory higher than max memory" msgstr "" #: src/qemu_driver.c:3468 src/uml_driver.c:1386 #, fuzzy msgid "cannot set memory of an active domain" msgstr "Name der inaktiven Domain" #: src/qemu_driver.c:3671 #, fuzzy msgid "Invalid save image format specified in configuration file" msgstr "Konfigurationsdatei konnte nicht analysiert werden" #: src/qemu_driver.c:3709 #, fuzzy msgid "failed to get domain xml" msgstr "Konnte ISP Namen '%s' nicht ermitteln" #: src/qemu_driver.c:3717 #, fuzzy, c-format msgid "failed to create '%s'" msgstr "Cursor konnte nicht erzeugt werden" #: src/qemu_driver.c:3723 #, fuzzy msgid "failed to write save header" msgstr "Konnte Sperr-Datei '%s' nicht schreiben" #: src/qemu_driver.c:3729 #, fuzzy msgid "failed to write xml" msgstr "Konnte Sperr-Datei '%s' nicht schreiben" #: src/qemu_driver.c:3735 #, fuzzy, c-format msgid "unable to save file %s" msgstr "Logtexte in Datei speichern" #: src/qemu_driver.c:3766 #, fuzzy, c-format msgid "Invalid compress format %d" msgstr "Ungültiger Parameter für für PrintDlgEx" #: src/qemu_driver.c:3777 src/qemu_driver.c:3884 src/qemu_driver.c:7106 #, fuzzy msgid "migrate operation failed" msgstr "Befehlsausführung '%s' schlug fehl" #: src/qemu_driver.c:3788 src/qemu_driver.c:3895 #, fuzzy msgid "'migrate' not supported by this qemu" msgstr "Gzip wird nicht für diese zlib Version unterstützt" #: src/qemu_driver.c:3860 #, fuzzy msgid "suspending before dump failed" msgstr "Suspend-Operation gescheitert" #: src/qemu_driver.c:3912 #, fuzzy msgid "resuming after dump failed" msgstr "strdup fehlgeschlagen" #: src/qemu_driver.c:3945 #, fuzzy msgid "cannot change vcpu count of an active domain" msgstr "Name der inaktiven Domain" #: src/qemu_driver.c:3951 src/qemu_driver.c:4164 src/qemu_driver.c:4199 #, fuzzy, c-format msgid "unknown virt type in domain definition '%d'" msgstr "Domain-Definitionsdatei laden" #: src/qemu_driver.c:3958 msgid "could not determine max vcpus for the domain" msgstr "" #: src/qemu_driver.c:3964 #, c-format msgid "" "requested vcpus is greater than max allowable vcpus for the domain: %d > %d" msgstr "" #: src/qemu_driver.c:4006 src/qemu_driver.c:4075 #, fuzzy msgid "cannot pin vcpus on an inactive domain" msgstr "Eine inaktive Domain undefinieren" #: src/qemu_driver.c:4012 #, fuzzy, c-format msgid "vcpu number out of range %d > %d" msgstr "Ganzzahliger Wert »%s« ist außerhalb des Wertebereiches." #: src/qemu_driver.c:4033 #, fuzzy msgid "cannot set affinity" msgstr "Setze Lesezeichen %i\tAlt-%i" #: src/qemu_driver.c:4038 #, fuzzy msgid "cpu affinity is not supported" msgstr "Bildtyp »%s« wird nicht unterstützt" #: src/qemu_driver.c:4103 #, fuzzy msgid "cannot get vCPU placement & pCPU time" msgstr "Kann den offiziellen Hostnamen nicht bekommen" #: src/qemu_driver.c:4119 #, fuzzy msgid "cannot get affinity" msgstr "Bekomme den Hostnamen nicht" #: src/qemu_driver.c:4129 msgid "cpu affinity is not available" msgstr "" #: src/qemu_driver.c:4222 #, fuzzy msgid "Failed to get security label" msgstr "Konnte ISP Namen '%s' nicht ermitteln" #: src/qemu_driver.c:4253 #, c-format msgid "security model string exceeds max %d bytes" msgstr "" #: src/qemu_driver.c:4263 #, c-format msgid "security DOI string exceeds max %d bytes" msgstr "" #: src/qemu_driver.c:4294 #, fuzzy msgid "cannot read domain image" msgstr "Kann die Typnamen nicht aus '%s' lesen !" #: src/qemu_driver.c:4300 #, fuzzy msgid "failed to read qemu header" msgstr "Konnte keine PID von Sperr-Datei lesen." #: src/qemu_driver.c:4306 #, fuzzy msgid "image magic is incorrect" msgstr "Bildtyp »%s« wird nicht unterstützt" #: src/qemu_driver.c:4312 #, fuzzy, c-format msgid "image version is not supported (%d > %d)" msgstr "Gzip wird nicht für diese zlib Version unterstützt" #: src/qemu_driver.c:4324 msgid "failed to read XML" msgstr "Lesen von XML fehlgeschlagen" #: src/qemu_driver.c:4332 src/qemu_driver.c:6954 #, fuzzy msgid "failed to parse XML" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/qemu_driver.c:4373 src/qemu_driver.c:6991 #, fuzzy msgid "failed to assign new VM" msgstr "Erwerb des neuen Kontexts fehlgeschlagen.\n" #: src/qemu_driver.c:4390 #, fuzzy, c-format msgid "Unknown compressed save format %d" msgstr "Nicht unterstütztes Format in der Zwischenablage." #: src/qemu_driver.c:4400 #, fuzzy, c-format msgid "Failed to start decompression binary %s" msgstr "Domain %s konnte nicht gestartet werden" #: src/qemu_driver.c:4435 #, fuzzy msgid "failed to resume domain" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/qemu_driver.c:4507 src/qemu_driver.c:4543 src/xen_unified.c:1082 #: src/xen_unified.c:1121 #, fuzzy, c-format msgid "unsupported config type %s" msgstr "Nicht unterstützter Laufwerkstyp %s" #: src/qemu_driver.c:4602 #, fuzzy, c-format msgid "Cannot determine QEMU argv syntax %s" msgstr "Kann keinen Font-Knoten '%s' finden." #: src/qemu_driver.c:4975 #, c-format msgid "cannot convert disk '%s' to bus/device index" msgstr "" #: src/qemu_driver.c:5001 #, fuzzy, c-format msgid "Unsupported disk name mapping for bus '%s'" msgstr "Nicht unterstützter Laufwerkstyp %s" #: src/qemu_driver.c:5036 #, c-format msgid "No device with bus '%s' and target '%s'" msgstr "" #: src/qemu_driver.c:5054 #, c-format msgid "" "Emulator version does not support removable media for device '%s' and target " "'%s'" msgstr "" #: src/qemu_driver.c:5091 #, fuzzy msgid "could not change cdrom media" msgstr "kann CDROM-Medium nicht wechseln" #: src/qemu_driver.c:5102 #, fuzzy, c-format msgid "changing cdrom media failed: %s" msgstr "kann CDROM-Medium nicht wechseln" #: src/qemu_driver.c:5142 #, fuzzy, c-format msgid "Unable to parse domain number '%s'\n" msgstr "Speichern der Domain %s nach %s gescheitert" #: src/qemu_driver.c:5147 src/qemu_driver.c:5165 #, c-format msgid "Expected ', ' parsing pci_add reply '%s'\n" msgstr "" #: src/qemu_driver.c:5154 #, c-format msgid "Expected 'bus ' parsing pci_add reply '%s'\n" msgstr "" #: src/qemu_driver.c:5160 #, fuzzy, c-format msgid "Unable to parse bus number '%s'\n" msgstr "Änderung des Video-Modus gescheitert" #: src/qemu_driver.c:5171 #, c-format msgid "Expected 'slot ' parsing pci_add reply '%s'\n" msgstr "" #: src/qemu_driver.c:5177 #, fuzzy, c-format msgid "Unable to parse slot number '%s'\n" msgstr "Konnte keinen vorübergehenden Dateinamen erstellen." #: src/qemu_driver.c:5198 src/qemu_driver.c:5267 #, fuzzy, c-format msgid "target %s already exists" msgstr "Dateiname bereits vorhanden" #: src/qemu_driver.c:5225 #, fuzzy, c-format msgid "cannot attach %s disk" msgstr "Normale Platten_partition:" #: src/qemu_driver.c:5240 #, fuzzy, c-format msgid "adding %s disk failed: %s" msgstr "Befehlsausführung '%s' schlug fehl" #: src/qemu_driver.c:5292 #, fuzzy msgid "cannot attach usb disk" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/qemu_driver.c:5303 #, fuzzy msgid "adding usb disk failed" msgstr "Host-Definitionsdatei laden" #: src/qemu_driver.c:5330 #, fuzzy msgid "installed qemu version does not support host_net_add" msgstr "Gzip wird nicht für diese zlib Version unterstützt" #: src/qemu_driver.c:5338 #, c-format msgid "" "network device type '%s' cannot be attached: qemu is not using a unix socket " "monitor" msgstr "" #: src/qemu_driver.c:5375 #, fuzzy, c-format msgid "failed to pass fd to qemu with '%s'" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/qemu_driver.c:5386 msgid "" "bridge/network interface attach not supported: qemu 'getfd' monitor command " "not available" msgstr "" #: src/qemu_driver.c:5409 #, fuzzy, c-format msgid "failed to add network backend with '%s'" msgstr "Abruf des Netzwerks '%s' scheiterte" #: src/qemu_driver.c:5429 #, fuzzy, c-format msgid "failed to add NIC with '%s'" msgstr "NAT für das physikalische Gerät %s" #: src/qemu_driver.c:5435 src/qemu_driver.c:5544 #, fuzzy, c-format msgid "parsing pci_add reply failed: %s" msgstr "kann CDROM-Medium nicht wechseln" #: src/qemu_driver.c:5455 #, fuzzy msgid "Unable to remove network backend\n" msgstr "Kann GTK nicht initialisieren: " #: src/qemu_driver.c:5457 #, fuzzy, c-format msgid "Failed to remove network backend with '%s'\n" msgstr "Fehler beim Erstellen des Netzwerks von %s" #: src/qemu_driver.c:5467 #, fuzzy, c-format msgid "Failed to close tapfd with '%s'\n" msgstr "Schliessen der PID-Datei fehlgeschlagen '%s' : %s" #: src/qemu_driver.c:5532 #, fuzzy msgid "cannot attach host pci device" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/qemu_driver.c:5596 #, fuzzy msgid "cannot attach usb device" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/qemu_driver.c:5607 #, fuzzy msgid "adding usb device failed" msgstr "Host-Definitionsdatei laden" #: src/qemu_driver.c:5629 src/qemu_driver.c:6090 #, fuzzy, c-format msgid "hostdev mode '%s' not supported" msgstr "Die DHCP-Startadresse entspricht nicht dem Netzwerk %s" #: src/qemu_driver.c:5644 src/qemu_driver.c:6101 #, fuzzy, c-format msgid "hostdev subsys type '%s' not supported" msgstr "ai_socktype nicht unterstützt" #: src/qemu_driver.c:5671 #, fuzzy msgid "cannot attach device on inactive domain" msgstr "Eine inaktive Domain undefinieren" #: src/qemu_driver.c:5733 #, c-format msgid "disk bus '%s' cannot be hotplugged." msgstr "" #: src/qemu_driver.c:5741 #, c-format msgid "disk device type '%s' cannot be hotplugged" msgstr "" #: src/qemu_driver.c:5755 #, fuzzy, c-format msgid "device type '%s' cannot be attached" msgstr "nur CDROM-Laufwerke können angehängt werden" #: src/qemu_driver.c:5796 #, fuzzy, c-format msgid "disk %s not found" msgstr "ISO-Pfad nicht gefunden" #: src/qemu_driver.c:5802 #, c-format msgid "disk %s cannot be detached - no PCI address for device" msgstr "" #: src/qemu_driver.c:5825 #, fuzzy, c-format msgid "failed to execute detach disk %s command" msgstr "Erzeugen eines Domänenbrowser fehlgeschlagen: %s" #: src/qemu_driver.c:5841 #, fuzzy, c-format msgid "failed to detach disk %s: invalid PCI address %.4x:%.2x:%.2x: %s" msgstr "Fehler beim Lösen des Geräts von %s" #: src/qemu_driver.c:5894 #, c-format msgid "network device %02x:%02x:%02x:%02x:%02x:%02x not found" msgstr "" #: src/qemu_driver.c:5903 msgid "network device cannot be detached - device state missing" msgstr "" #: src/qemu_driver.c:5917 src/qemu_driver.c:5946 #, c-format msgid "network device dettach command '%s' failed" msgstr "" #: src/qemu_driver.c:5927 #, c-format msgid "failed to detach network device: invalid PCI address %.4x:%.2x:%.2x: %s" msgstr "" #: src/qemu_driver.c:6002 #, c-format msgid "host pci device %.4x:%.2x:%.2x.%.1x not found" msgstr "" #: src/qemu_driver.c:6012 #, fuzzy msgid "hostdev cannot be detached - device state missing" msgstr "Eine inaktive Domain undefinieren" #: src/qemu_driver.c:6026 #, fuzzy msgid "cannot detach host pci device" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/qemu_driver.c:6037 #, fuzzy, c-format msgid "" "failed to detach host pci device: invalid PCI address %.4x:%.2x:%.2x: %s" msgstr "Fehler beim Lösen des Geräts von %s" #: src/qemu_driver.c:6131 #, fuzzy msgid "cannot detach device on inactive domain" msgstr "Eine inaktive Domain undefinieren" #: src/qemu_driver.c:6156 #, fuzzy msgid "only SCSI or virtio disk device can be detached dynamically" msgstr "nur CDROM-Laufwerke können angehängt werden" #: src/qemu_driver.c:6316 src/qemu_driver.c:6387 #, fuzzy, c-format msgid "cannot find cgroup for domain %s" msgstr "Kann keine aktive DFÜ-Verbindung finden: %s" #: src/qemu_driver.c:6334 #, fuzzy msgid "unable to set cpu shares tunable" msgstr "Versuch, örtliche Systemzeit zu bekommen, gescheitert." #: src/qemu_driver.c:6394 #, fuzzy msgid "unable to get cpu shares tunable" msgstr "Versuch, örtliche Systemzeit zu bekommen, gescheitert." #: src/qemu_driver.c:6454 src/test.c:2125 #, c-format msgid "invalid path: %s" msgstr "ungültiger Pfad: %s" #: src/qemu_driver.c:6465 #, fuzzy msgid "'info blockstats' command failed" msgstr "Befehlsausführung '%s' schlug fehl mit Fehler: %ul" #: src/qemu_driver.c:6478 msgid "'info blockstats' not supported by this qemu" msgstr "'info blockstats' nicht unterstützt von diesem qemu" #: src/qemu_driver.c:6546 #, c-format msgid "device not found: %s (%s)" msgstr "Gerät nicht gefunden: %s (%s)" #: src/qemu_driver.c:6597 src/test.c:2180 #, c-format msgid "invalid path, '%s' is not a known interface" msgstr "" #: src/qemu_driver.c:6640 src/uml_driver.c:1739 msgid "NULL or empty path" msgstr "NULL oder leerer Pfad" #: src/qemu_driver.c:6659 #, fuzzy, c-format msgid "%s: failed to open" msgstr "Konnte '%s' nicht für %s öffnen." #: src/qemu_driver.c:6670 #, fuzzy, c-format msgid "%s: failed to seek or read" msgstr "Konnte keine PID von Sperr-Datei lesen." #: src/qemu_driver.c:6677 src/uml_driver.c:1776 msgid "invalid path" msgstr "ungültiger Pfad" #: src/qemu_driver.c:6732 #, fuzzy, c-format msgid "mkstemp(\"%s\") failed" msgstr "Fehlgeschlagener Befehl: %s" #: src/qemu_driver.c:6745 #, fuzzy msgid "'memsave' command failed" msgstr "Befehlsausführung '%s' schlug fehl" #: src/qemu_driver.c:6754 #, fuzzy, c-format msgid "failed to read temporary file created with template %s" msgstr "Konfigurationsdatei %s konnte nicht gelesen werden" #: src/qemu_driver.c:6896 #, fuzzy msgid "no domain XML passed" msgstr "Knoten Domain-Liste" #: src/qemu_driver.c:6935 msgid "only tcp URIs are supported for KVM/QEMU migrations" msgstr "" #: src/qemu_driver.c:6945 msgid "URI did not have ':port' at the end" msgstr "" #: src/qemu_driver.c:6971 #, fuzzy msgid "could not generate random UUID" msgstr "UUID generieren fehlgeschlagen" #: src/qemu_driver.c:6980 #, fuzzy, c-format msgid "domain with the same name or UUID already exists as '%s'" msgstr "Domain ist bereits aktiv" #: src/qemu_driver.c:7071 msgid "off-line migration specified, but suspend operation failed" msgstr "" #: src/qemu_driver.c:7115 src/qemu_driver.c:7130 #, fuzzy, c-format msgid "migrate failed: %s" msgstr "Fehlgeschlagener Befehl: %s" #: src/qemu_driver.c:7125 #, fuzzy msgid "could not get info about migration" msgstr "Abruf der Schnittstelleninformationen gescheitert" #: src/qemu_driver.c:7160 #, fuzzy, c-format msgid "Failed to resume guest %s after failure\n" msgstr "Fortsetzen der Domain %s gescheitert" #: src/qemu_driver.c:7282 src/xen_unified.c:1573 #, fuzzy, c-format msgid "device %s is not a PCI device" msgstr "'%s' ist keine gültige POT-Datei." #: src/remote_internal.c:300 #, fuzzy msgid "failed to find libvirtd binary" msgstr "Netzwerk wurde nicht gefunden" #: src/remote_internal.c:382 msgid "" "remote_open: transport in URL not recognised (should be tls|unix|ssh|ext|tcp)" msgstr "" #: src/remote_internal.c:540 msgid "remote_open: for 'ext' transport, command is required" msgstr "" #: src/remote_internal.c:562 src/xend_internal.c:808 #, fuzzy, c-format msgid "unable to resolve hostname '%s': %s" msgstr "Kann GTK nicht initialisieren: " #: src/remote_internal.c:613 #, fuzzy, c-format msgid "unable to connect to libvirtd at '%s'" msgstr "Kann GTK nicht initialisieren: " #: src/remote_internal.c:665 #, fuzzy msgid "unable to create socket" msgstr "Cursor konnte nicht erzeugt werden" #: src/remote_internal.c:689 #, fuzzy, c-format msgid "unable to connect to '%s'" msgstr "Kann GTK nicht initialisieren: " #: src/remote_internal.c:755 #, fuzzy msgid "unable to create socket pair" msgstr "Erzeugen des Socket fehlgeschlagen: %s" #: src/remote_internal.c:775 msgid "transport methods unix, ssh and ext are not supported under Windows" msgstr "" #: src/remote_internal.c:784 msgid "unable to make socket non-blocking" msgstr "" #: src/remote_internal.c:790 #, fuzzy msgid "unable to make pipe" msgstr "Kann GTK nicht initialisieren: " #: src/remote_internal.c:824 #, fuzzy msgid "unable to auto-detect URI" msgstr "Abrufen der URI scheiterte" #: src/remote_internal.c:841 msgid "Error allocating callbacks list" msgstr "" #: src/remote_internal.c:846 #, fuzzy msgid "Error allocating domainEvents" msgstr "Fehler beim Öffnen der Datei %s!" #: src/remote_internal.c:1065 #, fuzzy, c-format msgid "Cannot access %s '%s'" msgstr "Prüfen Sie Ihren Zugang" #: src/remote_internal.c:1087 #, fuzzy, c-format msgid "unable to allocate TLS credentials: %s" msgstr "Kann keinen Speicher für new_context zuweisen" #: src/remote_internal.c:1107 #, fuzzy, c-format msgid "unable to load CA certificate: %s" msgstr "Kann TTY-Label nicht wiederherstellen...\n" #: src/remote_internal.c:1122 #, c-format msgid "unable to load private key/certificate: %s" msgstr "" #: src/remote_internal.c:1151 #, fuzzy, c-format msgid "unable to initialize TLS client: %s" msgstr "Laden der DLL '%s' gescheitert" #: src/remote_internal.c:1160 #, fuzzy, c-format msgid "unable to set TLS algorithm priority: %s" msgstr "Einstellung von PAM_TTY fehlgeschlagen\n" #: src/remote_internal.c:1169 #, fuzzy, c-format msgid "unable to set certificate priority: %s" msgstr "Versuch gescheitert, die Thread-Priorität %d zu setzten." #: src/remote_internal.c:1179 #, fuzzy, c-format msgid "unable to set session credentials: %s" msgstr "Clientobjekt-Erzeugung fehlgeschlagen: %s\n" #: src/remote_internal.c:1194 #, fuzzy, c-format msgid "unable to complete TLS handshake: %s" msgstr "Kann TTY-Label nicht wiederherstellen...\n" #: src/remote_internal.c:1216 #, c-format msgid "unable to complete TLS initialization: %s" msgstr "" #: src/remote_internal.c:1222 msgid "server verification (of our certificate or IP address) failed\n" msgstr "" #: src/remote_internal.c:1247 #, fuzzy, c-format msgid "unable to verify server certificate: %s" msgstr "Clientobjekt-Erzeugung fehlgeschlagen: %s\n" #: src/remote_internal.c:1254 #, fuzzy msgid "cannot get current time" msgstr "Kann den offiziellen Hostnamen nicht bekommen" #: src/remote_internal.c:1259 #, fuzzy msgid "Invalid certificate" msgstr "'%s' ist ungültig" #: src/remote_internal.c:1262 #, fuzzy msgid "The certificate is not trusted." msgstr "'%s' ist keine gültige POT-Datei." #: src/remote_internal.c:1265 #, fuzzy msgid "The certificate hasn't got a known issuer." msgstr "" "remoteCheckCertificate: Das Client-Zertifikat hat einen unbekannten " "Herausgeber." #: src/remote_internal.c:1268 #, fuzzy msgid "The certificate has been revoked." msgstr "***Ein Fehlerbericht wurde erstellt\n" #: src/remote_internal.c:1272 #, fuzzy msgid "The certificate uses an insecure algorithm" msgstr "" "remoteCheckCertificate: Das Client-Zertifikat benutzt einen unsicheren " "Algorithmus." #: src/remote_internal.c:1276 #, fuzzy, c-format msgid "server certificate failed validation: %s" msgstr "Versuch, DDE-Server '%s' zu registrieren, gescheitert" #: src/remote_internal.c:1282 msgid "Certificate type is not X.509" msgstr "Zertifikatstyp ist nicht X.509" #: src/remote_internal.c:1287 msgid "gnutls_certificate_get_peers failed" msgstr "gnutls_certificate_get_peers fehlgeschlagen" #: src/remote_internal.c:1297 #, fuzzy, c-format msgid "unable to initialize certificate: %s" msgstr "Kann GTK nicht initialisieren: " #: src/remote_internal.c:1305 #, fuzzy, c-format msgid "unable to import certificate: %s" msgstr "Kann GTK nicht initialisieren: " #: src/remote_internal.c:1312 msgid "The certificate has expired" msgstr "Das Zertifikat ist abgelaufen" #: src/remote_internal.c:1318 msgid "The certificate is not yet activated" msgstr "Das Zertifikat ist momentan nicht aktiviert" #: src/remote_internal.c:1326 #, c-format msgid "Certificate's owner does not match the hostname (%s)" msgstr "" #: src/remote_internal.c:1627 #, fuzzy, c-format msgid "too many NUMA cells: %d > %d" msgstr "Der Pfad '%s' enthält zu viele \"..\"." #: src/remote_internal.c:1690 src/remote_internal.c:1704 #, fuzzy, c-format msgid "too many remote domain IDs: %d > %d" msgstr "zu viele Domains" #: src/remote_internal.c:2208 #, c-format msgid "map length greater than maximum: %d > %d" msgstr "" #: src/remote_internal.c:2247 #, fuzzy, c-format msgid "vCPU count exceeds maximum: %d > %d" msgstr "Zeige Zusammenfassung des VCPU-Anzahl" #: src/remote_internal.c:2253 #, c-format msgid "vCPU map buffer length exceeds maximum: %d > %d" msgstr "" #: src/remote_internal.c:2270 #, c-format msgid "host reports too many vCPUs: %d > %d" msgstr "Rechner meldet zu viele vCPUs: %d > %d" #: src/remote_internal.c:2276 #, c-format msgid "host reports map buffer length exceeds maximum: %d > %d" msgstr "" #: src/remote_internal.c:2351 #, c-format msgid "security label exceeds maximum: %zd" msgstr "" #: src/remote_internal.c:2386 #, c-format msgid "security model exceeds maximum: %zd" msgstr "" #: src/remote_internal.c:2395 #, c-format msgid "security doi exceeds maximum: %zd" msgstr "" #: src/remote_internal.c:2698 src/remote_internal.c:2712 #, fuzzy, c-format msgid "too many remote domain names: %d > %d" msgstr "zu viele Domains" #: src/remote_internal.c:2996 msgid "" "remoteDomainGetSchedulerParameters: returned number of parameters exceeds " "limit" msgstr "" #: src/remote_internal.c:3023 #, fuzzy msgid "remoteDomainGetSchedulerParameters: unknown parameter type" msgstr "Typ des RAS-Bilds unbekannt" #: src/remote_internal.c:3054 #, fuzzy msgid "out of memory allocating array" msgstr "Speicherzuweisung ändern" #: src/remote_internal.c:3081 msgid "unknown parameter type" msgstr "Unbekannter Parametertyp" #: src/remote_internal.c:3192 #, c-format msgid "block peek request too large for remote protocol, %zi > %d" msgstr "" #: src/remote_internal.c:3213 src/remote_internal.c:3264 msgid "returned buffer is not same size as requested" msgstr "" #: src/remote_internal.c:3244 #, c-format msgid "memory peek request too large for remote protocol, %zi > %d" msgstr "" #: src/remote_internal.c:3376 src/remote_internal.c:3390 #: src/remote_internal.c:3449 src/remote_internal.c:3463 #, c-format msgid "too many remote networks: %d > %d" msgstr "zu viele Remote-Netzwerke: %d > %d" #: src/remote_internal.c:3865 src/remote_internal.c:3879 #: src/remote_internal.c:3937 src/remote_internal.c:3951 #, fuzzy, c-format msgid "too many remote interfaces: %d > %d" msgstr "zu viele Remote-Netzwerke: %d > %d" #: src/remote_internal.c:4261 src/remote_internal.c:4330 #, fuzzy msgid "too many storage pools requested" msgstr "zu viele Treiber registriert" #: src/remote_internal.c:4273 src/remote_internal.c:4342 #, fuzzy msgid "too many storage pools received" msgstr "zu viele Treiber registriert" #: src/remote_internal.c:4836 #, fuzzy msgid "too many storage volumes requested" msgstr "zu viele Treiber registriert" #: src/remote_internal.c:4849 #, fuzzy msgid "too many storage volumes received" msgstr "zu viele Treiber registriert" #: src/remote_internal.c:5235 #, fuzzy msgid "too many device names requested" msgstr "zu viele Treiber registriert" #: src/remote_internal.c:5249 #, fuzzy msgid "too many device names received" msgstr "zu viele Treiber registriert" #: src/remote_internal.c:5389 #, fuzzy msgid "too many capability names requested" msgstr "zu viele Treiber registriert" #: src/remote_internal.c:5402 #, fuzzy msgid "too many capability names received" msgstr "zu viele Treiber registriert" #: src/remote_internal.c:5587 #, c-format msgid "unknown authentication type %s" msgstr "Unkannter Authentifikationstyps %s" #: src/remote_internal.c:5597 #, fuzzy, c-format msgid "requested authentication type %s rejected" msgstr "Nicht unterstützter Konsolen-Authentifikationstype" #: src/remote_internal.c:5638 #, c-format msgid "unsupported authentication type %d" msgstr "Nicht unterstützter Authentifikationstyps %d" #: src/remote_internal.c:5880 #, fuzzy, c-format msgid "failed to initialize SASL library: %d (%s)" msgstr "Laden der DLL '%s' gescheitert" #: src/remote_internal.c:5889 #, fuzzy msgid "failed to get sock address" msgstr "Konnte ISP Namen '%s' nicht ermitteln" #: src/remote_internal.c:5899 #, fuzzy msgid "failed to get peer address" msgstr "Konnte ISP Namen '%s' nicht ermitteln" #: src/remote_internal.c:5924 #, fuzzy, c-format msgid "Failed to create SASL client context: %d (%s)" msgstr "%s: Fehler beim Erzeugen des Versionsatzes: %s" #: src/remote_internal.c:5937 msgid "invalid cipher size for TLS session" msgstr "" #: src/remote_internal.c:5947 #, fuzzy, c-format msgid "cannot set external SSF %d (%s)" msgstr "Dieser Filtersatz kann nicht entfernt werden." #: src/remote_internal.c:5966 #, fuzzy, c-format msgid "cannot set security props %d (%s)" msgstr "Dieser Filtersatz kann nicht entfernt werden." #: src/remote_internal.c:5985 #, fuzzy, c-format msgid "SASL mechanism %s not supported by server" msgstr "Diese Funktion wird vom Hypervisor nicht unterstützt" #: src/remote_internal.c:6004 #, fuzzy, c-format msgid "Failed to start SASL negotiation: %d (%s)" msgstr "Domain %s konnte nicht gestartet werden" #: src/remote_internal.c:6022 src/remote_internal.c:6100 #, fuzzy msgid "Failed to make auth credentials" msgstr "" "Der Versuch eines Clients, eine Verbindung herzustellen, ist gescheitert." #: src/remote_internal.c:6046 #, c-format msgid "SASL negotiation data too long: %d bytes" msgstr "" #: src/remote_internal.c:6086 #, fuzzy, c-format msgid "Failed SASL step: %d (%s)" msgstr "Befehlsausführung '%s' schlug fehl" #: src/remote_internal.c:6170 #, c-format msgid "negotiation SSF %d was not strong enough" msgstr "" #: src/remote_internal.c:6245 #, fuzzy msgid "Failed to collect auth credentials" msgstr "" "Der Versuch eines Clients, eine Verbindung herzustellen, ist gescheitert." #: src/remote_internal.c:6280 #, fuzzy msgid "no event support" msgstr "Component: language support" #: src/remote_internal.c:6285 #, fuzzy msgid "adding cb to list" msgstr "Verzeichnis hinzufügen" #: src/remote_internal.c:6315 #, fuzzy msgid "marking cb for deletion" msgstr "Domain vcpu-Information" #: src/remote_internal.c:6321 #, fuzzy msgid "removing cb from list" msgstr "Verzeichnis hinzufügen" #: src/remote_internal.c:6442 src/remote_internal.c:6455 #, fuzzy, c-format msgid "too many remote secret UUIDs: %d > %d" msgstr "zu viele Domains" #: src/remote_internal.c:6680 msgid "xdr_remote_message_header failed" msgstr "" #: src/remote_internal.c:6686 msgid "marshalling args" msgstr "" #: src/remote_internal.c:6703 #, fuzzy msgid "xdr_u_int (length word)" msgstr "xdr_int (Langwort)" #: src/remote_internal.c:6749 #, fuzzy msgid "cannot send data" msgstr "Programm kann nicht ausgeführt werden:" #: src/remote_internal.c:6780 #, fuzzy, c-format msgid "failed to read from TLS socket %s" msgstr "Konnte keine PID von Sperr-Datei lesen." #: src/remote_internal.c:6785 src/remote_internal.c:6803 #, fuzzy msgid "server closed connection" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/remote_internal.c:6799 #, fuzzy msgid "cannot recv data" msgstr "Programm kann nicht ausgeführt werden:" #: src/remote_internal.c:6832 #, fuzzy, c-format msgid "failed to encode SASL data: %s" msgstr "Konnte Daten nicht von der Zwischenablage holen." #: src/remote_internal.c:6930 #, fuzzy, c-format msgid "failed to decode SASL data: %s" msgstr "Konnte Daten nicht von der Zwischenablage holen." #: src/remote_internal.c:6981 #, fuzzy msgid "xdr_u_int (length word, reply)" msgstr "xdr_int (Langwort)" #: src/remote_internal.c:6988 msgid "packet received from server too small" msgstr "" #: src/remote_internal.c:6997 msgid "packet received from server too large" msgstr "" #: src/remote_internal.c:7034 #, fuzzy msgid "invalid header in reply" msgstr "wxSocket: ungültige Signatur in ReadMsg." #: src/remote_internal.c:7043 #, c-format msgid "unknown program (received %x, expected %x)" msgstr "" #: src/remote_internal.c:7051 #, c-format msgid "unknown protocol version (received %x, expected %x)" msgstr "" #: src/remote_internal.c:7071 #, c-format msgid "got unexpected RPC call %d from server" msgstr "" #: src/remote_internal.c:7100 #, c-format msgid "no call waiting for reply with serial %d" msgstr "" #: src/remote_internal.c:7109 #, c-format msgid "unknown procedure (received %x, expected %x)" msgstr "" #: src/remote_internal.c:7122 msgid "unmarshalling ret" msgstr "" #: src/remote_internal.c:7132 #, fuzzy msgid "unmarshalling remote_error" msgstr "Fehler beim Öffnen der Datei %s!" #: src/remote_internal.c:7141 #, fuzzy, c-format msgid "unknown status (received %x)" msgstr "Unbekannter Status-Code" #: src/remote_internal.c:7271 #, fuzzy msgid "poll on socket failed" msgstr "Versuch, Daten in der Zwischenablage abzulegen, gescheitert" #: src/remote_internal.c:7332 msgid "received hangup / error event on socket" msgstr "" #: src/remote_internal.c:7426 #, fuzzy msgid "failed to wait on condition" msgstr "Versuch, Daten in der Zwischenablage abzulegen, gescheitert" #: src/remote_internal.c:7563 msgid "remoteDomainProcessEvent: unmarshalling msg" msgstr "" #: src/security.c:46 #, fuzzy, c-format msgid "invalid security model '%s'" msgstr "Audio-Modell einfügen" #: src/security.c:120 #, c-format msgid "%s: DOI '%s' is longer than the maximum allowed length of %d" msgstr "" #: src/security_selinux.c:114 #, fuzzy, c-format msgid "%s: cannot open SELinux virtual domain context file %s: %s" msgstr "Kein Kontext in Datei %s\n" #: src/security_selinux.c:122 #, fuzzy, c-format msgid "%s: cannot read SELinux virtual domain context file %s: %s" msgstr "Kein Kontext in Datei %s\n" #: src/security_selinux.c:135 #, fuzzy, c-format msgid "%s: cannot open SELinux virtual image context file %s: %s" msgstr "Kein Kontext in Datei %s\n" #: src/security_selinux.c:143 #, fuzzy, c-format msgid "%s: cannot read SELinux virtual image context file %s: %s" msgstr "Kein Kontext in Datei %s\n" #: src/security_selinux.c:176 msgid "security label already defined for VM" msgstr "" #: src/security_selinux.c:197 src/security_selinux.c:203 #, fuzzy, c-format msgid "cannot generate selinux context for %s" msgstr "Kein Kontext in Datei %s\n" #: src/security_selinux.c:234 src/security_selinux.c:288 #, fuzzy, c-format msgid "%s: error calling getpidcon(): %s" msgstr "Fehler beim Öffnen der Datei %s!" #: src/security_selinux.c:296 #, c-format msgid "%s: security label exceeds maximum lenth: %d" msgstr "" #: src/security_selinux.c:308 #, c-format msgid "%s: error calling security_getenforce(): %s" msgstr "" #: src/security_selinux.c:343 #, c-format msgid "%s: unable to set security context '\\%s' on %s: %s." msgstr "" #: src/security_selinux.c:379 #, fuzzy, c-format msgid "cannot resolve symlink %s" msgstr "Programm kann nicht ausgeführt werden:" #: src/security_selinux.c:448 #, fuzzy, c-format msgid "Invalid security label %s" msgstr "GIF: Ungültiger Index." #: src/security_selinux.c:467 #, c-format msgid "" "%s: security label driver mismatch: '%s' model configured for domain, but " "hypervisor driver is '%s'." msgstr "" #: src/security_selinux.c:477 #, fuzzy, c-format msgid "%s: unable to set security context '\\%s': %s." msgstr "Einstellung von PAM_TTY fehlgeschlagen\n" #: src/storage_backend.c:131 #, fuzzy, c-format msgid "could not open input path '%s'" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/storage_backend.c:153 #, fuzzy, c-format msgid "failed reading from file '%s'" msgstr "Konnte keine PID von Sperr-Datei lesen." #: src/storage_backend.c:169 src/storage_backend.c:273 #, fuzzy, c-format msgid "cannot extend file '%s'" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/storage_backend.c:175 #, fuzzy, c-format msgid "failed writing to file '%s'" msgstr "Schreiben in die PID-Datei fehlgeschlagen '%s' : %s" #: src/storage_backend.c:185 src/storage_backend.c:229 #: src/storage_backend.c:323 src/storage_backend_fs.c:1173 #: src/storage_backend_logical.c:640 #, fuzzy, c-format msgid "cannot close file '%s'" msgstr "Kann Datei '%s' nicht schließen" #: src/storage_backend.c:213 src/storage_backend.c:264 #: src/storage_backend_fs.c:849 src/storage_backend_fs.c:1090 #, fuzzy, c-format msgid "cannot create path '%s'" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/storage_backend.c:256 src/storage_backend_disk.c:562 #: src/storage_backend_logical.c:586 #, fuzzy msgid "storage pool does not support encrypted volumes" msgstr "Speicher-Pool ist nicht aktiv" #: src/storage_backend.c:303 src/storage_backend.c:314 #, fuzzy, c-format msgid "cannot fill file '%s'" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/storage_backend.c:395 src/storage_backend.c:401 #, fuzzy, c-format msgid "unknown storage vol type %d" msgstr "Typ des RAS-Bilds unbekannt" #: src/storage_backend.c:416 msgid "a different backing store can not be specified." msgstr "" #: src/storage_backend.c:423 #, fuzzy, c-format msgid "unknown storage vol backing store type %d" msgstr "Typ des RAS-Bilds unbekannt" #: src/storage_backend.c:429 #, c-format msgid "inaccessible backing store volume %s" msgstr "" #: src/storage_backend.c:439 #, c-format msgid "qcow volume encryption unsupported with volume format %s" msgstr "" #: src/storage_backend.c:446 #, fuzzy, c-format msgid "unsupported volume encryption format %d" msgstr "Nicht unterstützter Authentifikationstyps %d" #: src/storage_backend.c:452 msgid "too many secrets for qcow encryption" msgstr "" #: src/storage_backend.c:463 msgid "unable to find kvm-img or qemu-img" msgstr "" #: src/storage_backend.c:518 msgid "cannot copy from volume with qcow-create" msgstr "" #: src/storage_backend.c:524 #, fuzzy, c-format msgid "unsupported storage vol type %d" msgstr "Nicht unterstützter Konsolen-Authentifikationstype" #: src/storage_backend.c:530 msgid "copy-on-write image not supported with qcow-create" msgstr "" #: src/storage_backend.c:536 msgid "encrypted volumes not supported with qcow-create" msgstr "" #: src/storage_backend.c:570 #, fuzzy, c-format msgid "Unknown file create tool type '%d'." msgstr "Unbekannter Gerät-Typ '%s'" #: src/storage_backend.c:619 msgid "creation of non-raw file images is not supported without qemu-img." msgstr "" #: src/storage_backend.c:667 src/storage_conf.c:230 #, c-format msgid "missing backend for pool type %d" msgstr "" #: src/storage_backend.c:682 src/storage_backend_fs.c:302 #: src/storage_backend_scsi.c:147 src/storage_backend_mpath.c:52 #, fuzzy, c-format msgid "cannot open volume '%s'" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/storage_backend.c:745 #, fuzzy, c-format msgid "cannot stat file '%s'" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/storage_backend.c:778 #, fuzzy, c-format msgid "cannot seek to end of file '%s'" msgstr "Es konnte nicht zum Dateiende gesprungen werden" #: src/storage_backend.c:799 #, fuzzy, c-format msgid "cannot get file context of '%s'" msgstr "Kann den Inhalt der Datei %s nicht öffnen!" #: src/storage_backend.c:870 src/storage_backend_scsi.c:165 #, fuzzy, c-format msgid "cannot seek to beginning of file '%s'" msgstr "Es konnte nicht zum Dateiende gesprungen werden" #: src/storage_backend.c:877 src/storage_backend_scsi.c:172 #, fuzzy, c-format msgid "cannot read beginning of file '%s'" msgstr "Lesefehler in Datei '%s'" #: src/storage_backend.c:949 #, fuzzy, c-format msgid "cannot read dir '%s'" msgstr "Kann die Typnamen nicht aus '%s' lesen !" #: src/storage_backend.c:1036 #, fuzzy, c-format msgid "Failed to compile regex %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/storage_backend.c:1068 src/storage_backend.c:1202 msgid "cannot read fd" msgstr "kann fd nicht lesen" #: src/storage_backend.c:1139 src/storage_backend.c:1257 #, fuzzy, c-format msgid "failed to wait for command '%s'" msgstr "Konnte Zugriffszeit von Datei '%s' nicht ändern" #: src/storage_backend.c:1148 src/storage_backend.c:1270 msgid "command did not exit cleanly" msgstr "" #: src/storage_backend.c:1236 #, fuzzy, c-format msgid "read error on pipe to '%s'" msgstr "Lesefehler: %s" #: src/storage_backend.c:1264 #, c-format msgid "non-zero exit status from command %d" msgstr "" #: src/storage_backend.c:1291 src/storage_backend.c:1303 #, fuzzy, c-format msgid "%s not implemented on Win32" msgstr "%s: nicht implementiert\n" #: src/storage_backend_disk.c:111 msgid "cannot parse device start location" msgstr "" #: src/storage_backend_disk.c:118 msgid "cannot parse device end location" msgstr "" #: src/storage_backend_disk.c:400 #, fuzzy msgid "Invalid partition type" msgstr "Ungültiger FV OS-Typ" #: src/storage_backend_disk.c:408 #, fuzzy msgid "extended partition already exists" msgstr "Dateiname bereits vorhanden" #: src/storage_backend_disk.c:432 msgid "no extended partition found and no primary partition available" msgstr "" #: src/storage_backend_disk.c:517 msgid "no large enough free extent" msgstr "" #: src/storage_backend_disk.c:631 #, c-format msgid "Couldn't read volume target path '%s'" msgstr "" #: src/storage_backend_disk.c:642 #, c-format msgid "Volume path '%s' did not start with parent pool source device name." msgstr "" #: src/storage_backend_disk.c:651 #, c-format msgid "cannot parse partition number from target '%s'" msgstr "" #: src/storage_backend_fs.c:316 #, fuzzy, c-format msgid "cannot read header '%s'" msgstr "Kann die Typnamen nicht aus '%s' lesen !" #: src/storage_backend_fs.c:480 #, fuzzy, c-format msgid "invalid netfs path (no /): %s" msgstr "ungültiger Pfad: %s" #: src/storage_backend_fs.c:486 #, fuzzy, c-format msgid "invalid netfs path (ends in /): %s" msgstr "Ungültiger Verbindungszeiger in %s" #: src/storage_backend_fs.c:543 #, fuzzy msgid "bad spec" msgstr "Zeichensatz des Quellcodes:" #: src/storage_backend_fs.c:556 #, fuzzy msgid "missing in spec" msgstr "Fehlende Einhänge-Quelle" #: src/storage_backend_fs.c:603 #, fuzzy, c-format msgid "cannot read mount list '%s'" msgstr "Kann die Typnamen nicht aus '%s' lesen !" #: src/storage_backend_fs.c:695 src/storage_backend_fs.c:771 #: src/storage_backend_iscsi.c:276 msgid "missing source host" msgstr "Quellen-Host fehlt" #: src/storage_backend_fs.c:700 msgid "missing source path" msgstr "Quellen-Pfad fehlt" #: src/storage_backend_fs.c:706 src/storage_backend_fs.c:782 #: src/storage_backend_iscsi.c:283 msgid "missing source device" msgstr "Quellen-Gerät fehlt" #: src/storage_backend_fs.c:776 msgid "missing source dir" msgstr "Quellen-Verzeichnis fehlt" #: src/storage_backend_fs.c:873 #, fuzzy, c-format msgid "cannot open path '%s'" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/storage_backend_fs.c:969 #, fuzzy, c-format msgid "cannot statvfs path '%s'" msgstr "Pfad zur DB:" #: src/storage_backend_fs.c:1036 #, fuzzy, c-format msgid "cannot unlink path '%s'" msgstr "Pfad zur DB:" #: src/storage_backend_fs.c:1084 #, fuzzy msgid "cannot copy from volume to a directory volume" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/storage_backend_fs.c:1110 msgid "" "storage pool does not support building encrypted volumes from other volumes" msgstr "" #: src/storage_backend_fs.c:1130 msgid "creation of non-raw images is not supported without qemu-img" msgstr "" #: src/storage_backend_fs.c:1140 src/storage_backend_logical.c:617 #, fuzzy, c-format msgid "cannot read path '%s'" msgstr "Kann die Typnamen nicht aus '%s' lesen !" #: src/storage_backend_fs.c:1149 src/storage_backend_logical.c:626 #, fuzzy, c-format msgid "cannot set file owner '%s'" msgstr "Kann den Inhalt der Datei %s nicht öffnen!" #: src/storage_backend_fs.c:1157 src/storage_backend_logical.c:633 #, fuzzy, c-format msgid "cannot set file mode '%s'" msgstr "Kann den Inhalt der Datei %s nicht öffnen!" #: src/storage_backend_fs.c:1216 #, fuzzy, c-format msgid "cannot unlink file '%s'" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/storage_backend_iscsi.c:65 #, fuzzy, c-format msgid "host lookup failed %s" msgstr "Befehlsausführung '%s' schlug fehl" #: src/storage_backend_iscsi.c:72 #, c-format msgid "no IP address for target %s" msgstr "Keine IP-Adresse für das Ziel %s" #: src/storage_backend_iscsi.c:81 #, c-format msgid "cannot format ip addr for %s" msgstr "" #: src/storage_backend_iscsi.c:149 msgid "cannot find session" msgstr "Kann Session nicht finden" #: src/storage_backend_iscsi.c:188 #, c-format msgid "Failed to get host number for iSCSI session with path '%s'" msgstr "" #: src/storage_backend_iscsi.c:196 #, fuzzy, c-format msgid "Failed to find LUs on host %u" msgstr "Netzwerk wurde nicht gefunden: %s" #: src/storage_backend_logical.c:153 msgid "malformed volume extent offset value" msgstr "" #: src/storage_backend_logical.c:158 msgid "malformed volume extent length value" msgstr "" #: src/storage_backend_logical.c:163 msgid "malformed volume extent size value" msgstr "" #: src/storage_backend_logical.c:221 msgid "lvs command failed" msgstr "LVS-Befehl fehlgeschlagen" #: src/storage_backend_logical.c:227 #, fuzzy, c-format msgid "lvs command failed with exitstatus %d" msgstr "Befehlsausführung '%s' schlug fehl mit Fehler: %ul" #: src/storage_backend_logical.c:357 #, fuzzy msgid "failed to get source from sourceList" msgstr "Konnte Daten nicht aus der Zwischenablage kopieren" #: src/storage_backend_logical.c:412 #, fuzzy, c-format msgid "cannot open device '%s'" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/storage_backend_logical.c:418 #, fuzzy, c-format msgid "cannot clear device header of '%s'" msgstr "TGA-Vorspannspeicher konnte nicht bereitgestellt werden" #: src/storage_backend_logical.c:425 #, fuzzy, c-format msgid "cannot close device '%s'" msgstr "Gerättypen-Feld" #: src/storage_backend_logical.c:550 #, fuzzy, c-format msgid "cannot remove PV device '%s'" msgstr "Kann Gerät nicht öffnen %s" #: src/storage_backend_logical.c:649 #, fuzzy, c-format msgid "cannot find newly created volume '%s'" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/storage_backend_scsi.c:65 #, fuzzy, c-format msgid "Could not find typefile '%s'" msgstr "Konnte Ressourcendatei %s nicht finden." #: src/storage_backend_scsi.c:77 #, fuzzy, c-format msgid "Could not read typefile '%s'" msgstr "Konnte nicht %s in %s extrahieren: %s" #: src/storage_backend_scsi.c:89 #, c-format msgid "Device type '%s' is not an integer" msgstr "" #: src/storage_backend_scsi.c:96 #, fuzzy, c-format msgid "Device type is %d" msgstr "Gerättypen-Feld" #: src/storage_backend_scsi.c:228 #, fuzzy, c-format msgid "Trying to create volume for '%s'" msgstr "Konnte keinen Registrierungs-Eintrag für '%s'-Dateien erstellen." #: src/storage_backend_scsi.c:247 #, c-format msgid "No stable path found for '%s' in '%s'" msgstr "" #: src/storage_backend_scsi.c:260 src/storage_backend_mpath.c:123 #, fuzzy, c-format msgid "Failed to update volume for '%s'" msgstr "Konnte Zugriffszeit von Datei '%s' nicht ändern" #: src/storage_backend_scsi.c:311 #, fuzzy, c-format msgid "Looking for block device in '%s'" msgstr "Suche Nachrichtenkatalog '%s' in Pfad '%s'." #: src/storage_backend_scsi.c:316 src/storage_backend_scsi.c:392 #, fuzzy, c-format msgid "Failed to opendir sysfs path '%s'" msgstr "Desktop-Pfad konnte nicht gefunden werden" #: src/storage_backend_scsi.c:329 src/storage_backend_scsi.c:363 #, fuzzy, c-format msgid "Block device is '%s'" msgstr "Übersetzung ist &unklar" #: src/storage_backend_scsi.c:356 #, fuzzy, c-format msgid "Failed to parse block name %s" msgstr "Konnte keinen vorübergehenden Dateinamen erstellen." #: src/storage_backend_scsi.c:436 #, fuzzy, c-format msgid "Processing LU %u:%u:%u:%u" msgstr "Windows 2000 (build %lu" #: src/storage_backend_scsi.c:441 #, c-format msgid "Failed to determine if %u:%u:%u:%u is a Direct-Access LUN" msgstr "" #: src/storage_backend_scsi.c:457 #, c-format msgid "%u:%u:%u:%u is a Direct-Access LUN" msgstr "" #: src/storage_backend_scsi.c:467 #, fuzzy, c-format msgid "Failed to create new storage volume for %u:%u:%u:%u" msgstr "Fehler beim Erstellen des Netzwerks von %s" #: src/storage_backend_scsi.c:473 #, c-format msgid "Created new storage volume for %u:%u:%u:%u successfully" msgstr "" #: src/storage_backend_scsi.c:495 #, fuzzy, c-format msgid "Discovering LUs on host %u" msgstr "Gesamte CPUs auf der Host-Maschine:" #: src/storage_backend_scsi.c:508 src/storage_backend_scsi.c:551 #, fuzzy, c-format msgid "Failed to opendir path '%s'" msgstr "_Pfad zu den Installationsmedien:" #: src/storage_backend_scsi.c:521 #, fuzzy, c-format msgid "Found LU '%s'" msgstr "Einträge gefunden" #: src/storage_backend_scsi.c:543 #, c-format msgid "Finding host number from '%s'" msgstr "" #: src/storage_backend_scsi.c:560 #, fuzzy, c-format msgid "Failed to parse target '%s'" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/storage_backend_scsi.c:581 #, fuzzy, c-format msgid "Triggering rescan of host %d" msgstr "Gesamte CPUs auf der Host-Maschine:" #: src/storage_backend_scsi.c:589 #, fuzzy, c-format msgid "Scan trigger path is '%s'" msgstr "Kann die Typnamen nicht aus '%s' lesen !" #: src/storage_backend_scsi.c:595 #, c-format msgid "Could not open '%s' to trigger host scan" msgstr "" #: src/storage_backend_scsi.c:606 #, c-format msgid "Write to '%s' to trigger host scan failed" msgstr "" #: src/storage_backend_scsi.c:615 #, c-format msgid "Rescan of host %d complete" msgstr "" #: src/storage_backend_scsi.c:630 #, fuzzy, c-format msgid "Failed to get host number from '%s'" msgstr "Konnte Daten nicht aus der Zwischenablage kopieren" #: src/storage_backend_scsi.c:636 #, fuzzy, c-format msgid "Scanning host%u" msgstr "Host-Details" #: src/storage_backend_mpath.c:65 #, fuzzy, c-format msgid "Failed to update volume target info for '%s'" msgstr "Konnte Zugriffszeit von Datei '%s' nicht ändern" #: src/storage_backend_mpath.c:76 #, fuzzy, c-format msgid "Failed to update volume target format for '%s'" msgstr "Konnte Zugriffszeit von Datei '%s' nicht ändern" #: src/storage_backend_mpath.c:332 #, fuzzy, c-format msgid "in %s" msgstr "bind: %s" #: src/storage_conf.c:377 #, fuzzy msgid "missing auth host attribute" msgstr "Zeile %d, Spalte %d: fehlendes Attribut »%s" #: src/storage_conf.c:384 #, fuzzy msgid "missing auth passwd attribute" msgstr "Zeile %d, Spalte %d: fehlendes Attribut »%s" #: src/storage_conf.c:426 #, fuzzy msgid "malformed octal mode" msgstr "Ungültiger Weiterleitungsmodus" #: src/storage_conf.c:437 #, fuzzy msgid "malformed owner element" msgstr "XPM: Pixel-Daten in falscher Form !" #: src/storage_conf.c:448 #, fuzzy msgid "malformed group element" msgstr "Verwalte Gruppen-Mitgliedschaft" #: src/storage_conf.c:480 #, fuzzy, c-format msgid "unknown storage pool type %s" msgstr "Füge neuen Speicher-Pool hinzu" #: src/storage_conf.c:497 #, fuzzy msgid "missing pool source name element" msgstr "Fehlendes Namenelement" #: src/storage_conf.c:505 msgid "unable to generate uuid" msgstr "Nicht möglich UUID zu generieren" #: src/storage_conf.c:526 #, fuzzy, c-format msgid "unknown pool format type %s" msgstr "Unbekannter Auth-Typ '%s'" #: src/storage_conf.c:536 #, fuzzy msgid "missing storage pool source host name" msgstr "Fehlender Quellen-Hostname" #: src/storage_conf.c:546 #, fuzzy msgid "cannot extract storage pool source devices" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/storage_conf.c:559 #, fuzzy msgid "missing storage pool source device path" msgstr "Fehlende Quellen-Gerät-Pfad" #: src/storage_conf.c:570 #, fuzzy msgid "missing storage pool source path" msgstr "Quellen-Pfad fehlt" #: src/storage_conf.c:592 #, fuzzy msgid "missing storage pool source adapter name" msgstr "Fehlender Quellen-Hostname" #: src/storage_conf.c:605 #, c-format msgid "unknown auth type '%s'" msgstr "Unbekannter Auth-Typ '%s'" #: src/storage_conf.c:620 #, fuzzy msgid "missing storage pool target path" msgstr "Fehlender Ziel-Pfad" #: src/storage_conf.c:667 #, fuzzy msgid "unknown root element for storage pool" msgstr "Unbekanntes root-Element" #: src/storage_conf.c:798 #, fuzzy, c-format msgid "unknown pool format number %d" msgstr "Nicht unterstütztes Format in der Zwischenablage." #: src/storage_conf.c:831 src/storage_conf.c:1625 msgid "unexpected pool type" msgstr "Unerwarteter Pool-Typ" #: src/storage_conf.c:929 #, c-format msgid "unknown size units '%s'" msgstr "Unkannte Grössen-Einheiten '%s'" #: src/storage_conf.c:936 #, fuzzy msgid "malformed capacity element" msgstr "XPM: Pixel-Daten in falscher Form !" #: src/storage_conf.c:941 msgid "capacity element value too large" msgstr "" #: src/storage_conf.c:973 #, fuzzy msgid "missing volume name element" msgstr "Fehlendes Namenelement" #: src/storage_conf.c:984 msgid "missing capacity element" msgstr "Fehlendes Kapazität-Element" #: src/storage_conf.c:1013 src/storage_conf.c:1044 #, fuzzy, c-format msgid "unknown volume format type %s" msgstr "Unbekannter Auth-Typ '%s'" #: src/storage_conf.c:1075 #, fuzzy msgid "unknown root element for storage vol" msgstr "Unbekanntes root-Element" #: src/storage_conf.c:1180 #, fuzzy, c-format msgid "unknown volume format number %d" msgstr "Nicht unterstütztes Format in der Zwischenablage." #: src/storage_conf.c:1519 #, fuzzy, c-format msgid "cannot create config directory %s" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/storage_conf.c:1527 msgid "cannot construct config file path" msgstr "" #: src/storage_conf.c:1538 msgid "cannot construct autostart link path" msgstr "" #: src/storage_conf.c:1552 msgid "failed to generate XML" msgstr "XML generieren fehlgeschlagen" #: src/storage_conf.c:1560 #, fuzzy, c-format msgid "cannot create config file %s" msgstr "Kann den Inhalt der Datei %s nicht öffnen!" #: src/storage_conf.c:1568 #, fuzzy, c-format msgid "cannot write config file %s" msgstr "Schreibfehler bei Datei '%s'" #: src/storage_conf.c:1575 #, fuzzy, c-format msgid "cannot save config file %s" msgstr "Kann den Inhalt der Datei %s nicht öffnen!" #: src/storage_conf.c:1596 #, c-format msgid "no config file for %s" msgstr "Keine Konfigurationsdatei für %s" #: src/storage_conf.c:1602 #, c-format msgid "cannot remove config for %s" msgstr "kann Konfiguration nicht entfernen für %s" #: src/storage_driver.c:273 src/storage_driver.c:918 src/storage_driver.c:947 msgid "no pool with matching uuid" msgstr "kein Pool mit passender UUID" #: src/storage_driver.c:298 #, fuzzy, c-format msgid "no pool with matching name '%s'" msgstr "Kein Pool mit übereinstimmenden Namen" #: src/storage_driver.c:478 src/test.c:3149 msgid "storage pool already exists" msgstr "Speicher-Pool bereits vorhanden" #: src/storage_driver.c:560 src/storage_driver.c:614 src/storage_driver.c:659 #: src/storage_driver.c:696 src/storage_driver.c:752 src/storage_driver.c:801 #: src/storage_driver.c:857 src/storage_driver.c:893 src/storage_driver.c:1009 #: src/storage_driver.c:1042 src/storage_driver.c:1087 #: src/storage_driver.c:1213 src/storage_driver.c:1338 #: src/storage_driver.c:1491 src/storage_driver.c:1570 #: src/storage_driver.c:1623 src/storage_driver.c:1670 msgid "no storage pool with matching uuid" msgstr "" #: src/storage_driver.c:566 msgid "pool is still active" msgstr "Pool ist immer noch aktiv" #: src/storage_driver.c:572 src/storage_driver.c:711 src/storage_driver.c:767 #: src/storage_driver.c:816 #, c-format msgid "pool '%s' has asynchronous jobs running." msgstr "" #: src/storage_driver.c:623 msgid "pool already active" msgstr "Pool ist bereits aktiv" #: src/storage_driver.c:668 msgid "storage pool is already active" msgstr "Speicher-Pool ist bereits aktiv" #: src/storage_driver.c:705 src/storage_driver.c:810 src/storage_driver.c:1015 #: src/storage_driver.c:1048 src/storage_driver.c:1093 #: src/storage_driver.c:1219 src/storage_driver.c:1351 #: src/storage_driver.c:1357 src/storage_driver.c:1497 #: src/storage_driver.c:1576 src/storage_driver.c:1629 #: src/storage_driver.c:1676 msgid "storage pool is not active" msgstr "Speicher-Pool ist nicht aktiv" #: src/storage_driver.c:761 msgid "storage pool is still active" msgstr "Speicher-Pool ist immer noch aktiv" #: src/storage_driver.c:774 msgid "pool does not support volume delete" msgstr "" #: src/storage_driver.c:953 src/test.c:3480 msgid "pool has no config file" msgstr "Pool hat keine Konfigurationsdatei" #: src/storage_driver.c:1101 src/storage_driver.c:1367 #: src/storage_driver.c:1508 src/storage_driver.c:1584 #: src/storage_driver.c:1637 src/storage_driver.c:1684 src/test.c:3602 #: src/test.c:3803 src/test.c:3879 src/test.c:3957 src/test.c:4002 #: src/test.c:4042 #, fuzzy, c-format msgid "no storage vol with matching name '%s'" msgstr "Kein Pool mit übereinstimmenden Namen" #: src/storage_driver.c:1141 msgid "no storage vol with matching key" msgstr "" #: src/storage_driver.c:1188 msgid "no storage vol with matching path" msgstr "" #: src/storage_driver.c:1232 src/test.c:3715 src/test.c:3796 msgid "storage vol already exists" msgstr "Speicher-Volumen bereits vorhanden" #: src/storage_driver.c:1244 msgid "storage pool does not support volume creation" msgstr "" #: src/storage_driver.c:1344 #, fuzzy, c-format msgid "no storage pool with matching name '%s'" msgstr "Kein Pool mit übereinstimmenden Namen" #: src/storage_driver.c:1378 #, fuzzy, c-format msgid "storage volume name '%s' already in use." msgstr "Speicher-Pool ist bereits aktiv" #: src/storage_driver.c:1394 msgid "storage pool does not support volume creation from an existing volume" msgstr "" #: src/storage_driver.c:1400 src/storage_driver.c:1515 #, fuzzy, c-format msgid "volume '%s' is still being allocated." msgstr "" "Fehler beim Wiederherstellen der Domain '%s'. Läuft die Domain bereits?" #: src/storage_driver.c:1522 msgid "storage pool does not support vol deletion" msgstr "" #: src/storage_encryption_conf.c:89 #, fuzzy msgid "unknown volume encryption secret type" msgstr "Unbekannter Auth-Typ '%s'" #: src/storage_encryption_conf.c:95 #, fuzzy, c-format msgid "unknown volume encryption secret type %s" msgstr "Unbekannter Auth-Typ '%s'" #: src/storage_encryption_conf.c:129 #, fuzzy msgid "unknown volume encryption format" msgstr "Unbekannter Auth-Typ '%s'" #: src/storage_encryption_conf.c:135 #, fuzzy, c-format msgid "unknown volume encryption format type %s" msgstr "Unbekannter Auth-Typ '%s'" #: src/storage_encryption_conf.c:146 #, fuzzy msgid "cannot extract volume encryption secrets" msgstr "Die Kataloge können nicht aus den RPM-Datei extrahiert werden." #: src/storage_encryption_conf.c:178 #, fuzzy msgid "unknown root element for volume encryption information" msgstr "Unbekanntes root-Element" #: src/storage_encryption_conf.c:209 #, fuzzy msgid "unexpected volume encryption secret type" msgstr "Unerwarteter MIME-Type" #: src/storage_encryption_conf.c:231 #, fuzzy msgid "unexpected encryption format" msgstr "Unerwarteter Fehlerist aufgetreten" #: src/test.c:260 #, c-format msgid "Exceeded max iface limit %d" msgstr "" #: src/test.c:450 #, fuzzy, c-format msgid "node vol list for pool '%s'" msgstr "Installiere Audio-Gerät für lokale VM" #: src/test.c:461 #, fuzzy msgid "resolving volume filename" msgstr "Erzeuge Speicher-Pool..." #: src/test.c:543 #, fuzzy, c-format msgid "loading host definition file '%s'" msgstr "Fehler beim Laden der Katalogdatei '%s'." #: src/test.c:552 #, fuzzy, c-format msgid "Invalid XML in file '%s'" msgstr "Konnte '%s' nicht für %s öffnen." #: src/test.c:561 msgid "Root element is not 'node'" msgstr "" #: src/test.c:568 msgid "creating xpath context" msgstr "Erstelle xpath-Kontext" #: src/test.c:583 msgid "node cpu numa nodes" msgstr "Knoten CPU-NUMA-Knoten" #: src/test.c:591 msgid "node cpu sockets" msgstr "Knoten CPU-Sockets" #: src/test.c:599 msgid "node cpu cores" msgstr "Knoten CPU-Kerne" #: src/test.c:607 msgid "node cpu threads" msgstr "Knoten CPU-Threads" #: src/test.c:618 msgid "node active cpu" msgstr "Knoten aktive CPU" #: src/test.c:625 msgid "node cpu mhz" msgstr "Knoten CPU Mhz" #: src/test.c:640 msgid "node memory" msgstr "Knoten Speicher" #: src/test.c:646 msgid "node domain list" msgstr "Knoten Domain-Liste" #: src/test.c:657 msgid "resolving domain filename" msgstr "Domain-Dateiname auflösen" #: src/test.c:685 #, fuzzy msgid "node network list" msgstr "&Gefärbte Übersetzungsliste" #: src/test.c:695 msgid "resolving network filename" msgstr "Netzwerk-Dateinamen auflösen" #: src/test.c:721 #, fuzzy msgid "node interface list" msgstr "&Gefärbte Übersetzungsliste" #: src/test.c:731 #, fuzzy msgid "resolving interface filename" msgstr "Netzwerk-Dateinamen auflösen" #: src/test.c:754 #, fuzzy msgid "node pool list" msgstr "&Gefärbte Übersetzungsliste" #: src/test.c:766 #, fuzzy msgid "resolving pool filename" msgstr "Erzeuge Speicher-Pool..." #: src/test.c:850 msgid "testOpen: supply a path or use test:///default" msgstr "testOpen: Pfad angeben oder test:///default verwenden" #: src/test.c:920 src/uml_driver.c:1131 src/xen_unified.c:489 #, fuzzy msgid "cannot lookup hostname" msgstr "Bekomme den Hostnamen nicht" #: src/test.c:1164 #, fuzzy, c-format msgid "domain '%s' not paused" msgstr "Konsole nicht verfügbar während Pause" #: src/test.c:1206 src/test.c:1247 #, fuzzy, c-format msgid "domain '%s' not running" msgstr "Gast läuft nicht" #: src/test.c:1407 #, fuzzy, c-format msgid "saving domain '%s' failed to allocate space for metadata" msgstr "Kann kein Platz für Metadaten zuweisen" #: src/test.c:1414 #, fuzzy, c-format msgid "saving domain '%s' to '%s': open failed" msgstr "CHM-Archiv '%s' lässt sich nicht öffnen." #: src/test.c:1421 src/test.c:1427 src/test.c:1433 src/test.c:1440 #, fuzzy, c-format msgid "saving domain '%s' to '%s': write failed" msgstr "Konnte Sperr-Datei '%s' nicht schreiben" #: src/test.c:1491 #, fuzzy, c-format msgid "cannot read domain image '%s'" msgstr "Kann die Typnamen nicht aus '%s' lesen !" #: src/test.c:1497 #, fuzzy, c-format msgid "incomplete save header in '%s'" msgstr "DIB Header: Unbekannte Bittiefe." #: src/test.c:1503 #, fuzzy msgid "mismatched header magic" msgstr "Fehler beim Lesen des lokalen Headers in Zipdatei." #: src/test.c:1508 #, fuzzy, c-format msgid "failed to read metadata length in '%s'" msgstr "Es konnte nicht aus der Datei »%s« gelesen werden: %s" #: src/test.c:1514 #, fuzzy msgid "length of metadata out of range" msgstr "Ganzzahliger Wert »%s« ist außerhalb des Wertebereiches." #: src/test.c:1523 #, fuzzy, c-format msgid "incomplete metdata in '%s'" msgstr "In den Kommentaren suchen" #: src/test.c:1580 #, fuzzy, c-format msgid "domain '%s' coredump: failed to open %s" msgstr "CHM-Archiv '%s' lässt sich nicht öffnen." #: src/test.c:1586 #, c-format msgid "domain '%s' coredump: failed to write header to %s" msgstr "" #: src/test.c:1592 #, fuzzy, c-format msgid "domain '%s' coredump: write failed: %s" msgstr "Konnte Sperr-Datei '%s' nicht schreiben" #: src/test.c:1861 msgid "Range exceeds available cells" msgstr "" #: src/test.c:1895 #, fuzzy, c-format msgid "Domain '%s' is already running" msgstr "" "Fehler beim Wiederherstellen der Domain '%s'. Läuft die Domain bereits?" #: src/test.c:1932 #, fuzzy, c-format msgid "Domain '%s' is still running" msgstr "" "Fehler beim Wiederherstellen der Domain '%s'. Läuft die Domain bereits?" #: src/test.c:2425 #, fuzzy, c-format msgid "Network '%s' is still running" msgstr "" "Fehler beim Wiederherstellen der Domain '%s'. Läuft die Domain bereits?" #: src/test.c:2458 #, fuzzy, c-format msgid "Network '%s' is already running" msgstr "" "Fehler beim Wiederherstellen der Domain '%s'. Läuft die Domain bereits?" #: src/test.c:3108 src/test.c:3228 src/test.c:3261 src/test.c:3329 #, fuzzy, c-format msgid "storage pool '%s' is already active" msgstr "Speicher-Pool ist bereits aktiv" #: src/test.c:3290 src/test.c:3361 src/test.c:3513 src/test.c:3548 #: src/test.c:3594 src/test.c:3705 src/test.c:3786 src/test.c:3886 #: src/test.c:3964 src/test.c:4009 src/test.c:4049 #, fuzzy, c-format msgid "storage pool '%s' is not active" msgstr "Konsole nicht aktiviert für Gast jetzt" #: src/test.c:3645 #, fuzzy, c-format msgid "no storage vol with matching key '%s'" msgstr "Kein Doamin mit übereinstimmender UUID '%s'" #: src/test.c:3679 #, fuzzy, c-format msgid "no storage vol with matching path '%s'" msgstr "Kein Doamin mit übereinstimmender UUID '%s'" #: src/test.c:3723 src/test.c:3812 #, c-format msgid "Not enough free space in pool for volume '%s'" msgstr "" #: src/uml_conf.c:184 msgid "IP address not supported for ethernet inteface" msgstr "" #: src/uml_conf.c:189 msgid "script execution not supported for ethernet inteface" msgstr "" #: src/uml_conf.c:196 #, fuzzy msgid "TCP server networking type not supported" msgstr "Die DHCP-Startadresse entspricht nicht dem Netzwerk %s" #: src/uml_conf.c:201 #, fuzzy msgid "TCP client networking type not supported" msgstr "Die DHCP-Startadresse entspricht nicht dem Netzwerk %s" #: src/uml_conf.c:216 #, c-format msgid "Network '%s' not found" msgstr "Netzwerk '%s' nicht gefunden" #: src/uml_conf.c:246 #, fuzzy msgid "internal networking type not supported" msgstr "Die DHCP-Startadresse entspricht nicht dem Netzwerk %s" #: src/uml_conf.c:313 #, fuzzy msgid "only TCP listen is supported for chr device" msgstr "Speicherzuweisung gescheitert" #: src/uml_conf.c:333 #, fuzzy, c-format msgid "unsupported chr device type %d" msgstr "Nicht unterstützter Konsolen-Authentifikationstype" #: src/uml_driver.c:95 src/util.c:374 src/util.c:403 msgid "Failed to set close-on-exec file descriptor flag" msgstr "Setzen des close-on-exec-Dateibeschreiber-Flag fehlgeschlagen" #: src/uml_driver.c:135 #, fuzzy, c-format msgid "Failed to autostart VM '%s': %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/uml_driver.c:367 #, fuzzy msgid "cannot initialize inotify" msgstr "Kann OLE nicht initialisieren" #: src/uml_driver.c:373 #, fuzzy, c-format msgid "Failed to create monitor directory %s: %s" msgstr "Konnte Arbeits-Verzeichnis nicht ermitteln" #: src/uml_driver.c:406 #, fuzzy msgid "umlStartup: out of memory" msgstr "Übersetzungsspeicher aktualisieren" #: src/uml_driver.c:554 #, fuzzy, c-format msgid "failed to read pid: %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/uml_driver.c:603 #, fuzzy msgid "cannot open socket" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/uml_driver.c:612 #, fuzzy msgid "cannot bind socket" msgstr "Programm kann nicht ausgeführt werden:" #: src/uml_driver.c:667 #, c-format msgid "cannot send too long command %s (%d bytes)" msgstr "" #: src/uml_driver.c:677 #, fuzzy, c-format msgid "cannot send command %s" msgstr "Befehlsausführung '%s' schlug fehl" #: src/uml_driver.c:687 #, fuzzy, c-format msgid "cannot read reply %s" msgstr "Kann die Typnamen nicht aus '%s' lesen !" #: src/uml_driver.c:769 #, fuzzy msgid "no kernel specified" msgstr "Keine Einträge gefunden." #: src/uml_driver.c:778 #, fuzzy, c-format msgid "Cannot find UML kernel %s" msgstr "Kann keinen Font-Knoten '%s' finden." #: src/uml_driver.c:823 src/uml_driver.c:826 #, fuzzy, c-format msgid "Unable to write envv to logfile: %s" msgstr "Fehler beim Schreiben der Log-Datei" #: src/uml_driver.c:833 src/uml_driver.c:836 src/uml_driver.c:841 #, fuzzy, c-format msgid "Unable to write argv to logfile: %s" msgstr "Fehler beim Schreiben der Log-Datei" #: src/uml_driver.c:887 #, fuzzy, c-format msgid "Got unexpected pid %d != %d" msgstr "Unerwarteter Fehlerist aufgetreten" #: src/uml_driver.c:937 #, c-format msgid "unexpected UML URI path '%s', try uml:///system" msgstr "" #: src/uml_driver.c:944 #, c-format msgid "unexpected UML URI path '%s', try uml:///session" msgstr "" #: src/uml_driver.c:953 #, fuzzy msgid "uml state driver is not active" msgstr "Speicher-Pool ist nicht aktiv" #: src/uml_driver.c:1111 #, fuzzy, c-format msgid "cannot parse version %s" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/uml_driver.c:1183 #, fuzzy, c-format msgid "domain '%s' is already defined" msgstr "" "Fehler beim Wiederherstellen der Domain '%s'. Läuft die Domain bereits?" #: src/uml_driver.c:1193 #, fuzzy, c-format msgid "domain with uuid '%s' is already defined" msgstr "Domain %s existiert bereits" #: src/uml_driver.c:1428 #, fuzzy msgid "cannot read cputime for domain" msgstr "Kann keine aktive DFÜ-Verbindung finden: %s" #: src/uml_driver.c:1769 #, fuzzy, c-format msgid "cannot read %s" msgstr "Kann die Typnamen nicht aus '%s' lesen !" #: src/util.c:346 #, fuzzy msgid "cannot block signals" msgstr "Programm kann nicht ausgeführt werden:" #: src/util.c:361 #, fuzzy msgid "cannot create pipe" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/util.c:368 src/util.c:397 msgid "Failed to set non-blocking file descriptor flag" msgstr "Setzen des non-blocking-Dateibeschreiber-Flag fehlgeschlagen" #: src/util.c:390 #, fuzzy msgid "Failed to create pipe" msgstr "Konnte keine anonyme Unix-Pipe erstellen" #: src/util.c:417 src/util.c:532 #, fuzzy msgid "cannot fork child process" msgstr "Umleitung des Ein/Ausgabe des Unterprozesses gescheitert" #: src/util.c:436 src/util.c:473 #, fuzzy msgid "cannot unblock signals" msgstr "Programm kann nicht ausgeführt werden:" #: src/util.c:489 #, fuzzy msgid "failed to setup stdin file handle" msgstr "Konfigurationsdatei %s konnte nicht gelesen werden" #: src/util.c:495 #, fuzzy msgid "failed to setup stdout file handle" msgstr "Konfigurationsdatei %s konnte nicht gelesen werden" #: src/util.c:501 #, fuzzy msgid "failed to setup stderr file handle" msgstr "Konfigurationsdatei %s konnte nicht gelesen werden" #: src/util.c:519 #, fuzzy msgid "cannot become session leader" msgstr "Kann Session nicht finden" #: src/util.c:525 #, fuzzy, c-format msgid "cannot change to root directory: %s" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/util.c:542 #, fuzzy, c-format msgid "could not write pidfile %s for %d" msgstr "Konnte nicht %s in %s extrahieren: %s" #: src/util.c:566 #, fuzzy, c-format msgid "cannot execute binary %s" msgstr "Programm kann nicht ausgeführt werden:" #: src/util.c:679 #, c-format msgid "Intermediate daemon process exited with status %d." msgstr "" #: src/util.c:724 #, fuzzy msgid "Unknown poll response." msgstr "GIF: unbekannter Fehler!" #: src/util.c:755 #, fuzzy msgid "poll error" msgstr "Datenbankfehler: %s" #: src/util.c:831 #, c-format msgid "'%s' exited with non-zero status %d and signal %d: %s" msgstr "" #: src/util.c:977 #, fuzzy, c-format msgid "Failed to open file '%s'" msgstr "Konnte '%s' nicht für %s öffnen." #: src/util.c:984 #, fuzzy, c-format msgid "Failed to read file '%s'" msgstr "Cursor konnte nicht erzeugt werden" #: src/util.c:1884 #, fuzzy, c-format msgid "Failed to find user record for uid '%d'" msgstr "Netzwerk wurde nicht gefunden: %s" #: src/util.c:1938 #, fuzzy, c-format msgid "Failed to find user record for name '%s'" msgstr "Netzwerk wurde nicht gefunden: %s" #: src/util.c:1975 #, fuzzy, c-format msgid "Failed to find group record for name '%s'" msgstr "Netzwerk wurde nicht gefunden: %s" #: src/uuid.c:104 #, c-format msgid "Falling back to pseudorandom UUID, failed to generate random bytes: %s" msgstr "" #: src/vbox/vbox_driver.c:127 src/vbox/vbox_tmpl.c:521 msgid "no VirtualBox driver path specified (try vbox:///session)" msgstr "" #: src/vbox/vbox_driver.c:134 src/vbox/vbox_tmpl.c:528 #, c-format msgid "unknown driver path '%s' specified (try vbox:///session)" msgstr "" #: src/vbox/vbox_driver.c:141 src/vbox/vbox_tmpl.c:535 #, c-format msgid "unknown driver path '%s' specified (try vbox:///system)" msgstr "" #: src/vbox/vbox_driver.c:147 #, fuzzy msgid "unable to initialize VirtualBox driver API" msgstr "Kann GTK nicht initialisieren: " #: src/virsh.c:350 #, fuzzy msgid "unknown error" msgstr "unbekannter Fehler" #: src/virsh.c:371 msgid "print help" msgstr "Hilfe ausgeben" #: src/virsh.c:372 msgid "Prints global help or command specific help." msgstr "Gibt globale oder befehlsspezifische Hilfe aus." #: src/virsh.c:378 msgid "name of command" msgstr "Name des Befehls" #: src/virsh.c:390 msgid "" "Commands:\n" "\n" msgstr "" "Befehle:\n" "\n" #: src/virsh.c:403 msgid "autostart a domain" msgstr "Eine Domain automatisch starten" #: src/virsh.c:405 msgid "Configure a domain to be automatically started at boot." msgstr "" "Eine Domain so konfigurieren, dass sie beim Booten automatisch gestartet " "wird." #: src/virsh.c:410 src/virsh.c:511 src/virsh.c:725 src/virsh.c:761 #: src/virsh.c:819 src/virsh.c:887 src/virsh.c:1137 src/virsh.c:1180 #: src/virsh.c:1423 src/virsh.c:1467 src/virsh.c:1505 src/virsh.c:1543 #: src/virsh.c:1581 src/virsh.c:1619 src/virsh.c:1770 src/virsh.c:1856 #: src/virsh.c:1989 src/virsh.c:2045 src/virsh.c:2101 src/virsh.c:2220 #: src/virsh.c:2462 src/virsh.c:5738 src/virsh.c:5813 src/virsh.c:5874 #: src/virsh.c:5932 src/virsh.c:5990 src/virsh.c:6106 src/virsh.c:6226 #: src/virsh.c:6383 src/virsh.c:6697 msgid "domain name, id or uuid" msgstr "Domainname, ID oder UUID" #: src/virsh.c:411 src/virsh.c:2528 src/virsh.c:3505 msgid "disable autostarting" msgstr "Automatisches Starten deaktivieren" #: src/virsh.c:432 #, c-format msgid "Failed to mark domain %s as autostarted" msgstr "Markierung der Domain %s als automatisch zu starten gescheitert" #: src/virsh.c:435 #, c-format msgid "Failed to unmark domain %s as autostarted" msgstr "Demarkieren der Domain %s als automatisch zu starten gescheitert" #: src/virsh.c:442 #, c-format msgid "Domain %s marked as autostarted\n" msgstr "Domain %s als automatisch zu starten markiert\n" #: src/virsh.c:444 #, c-format msgid "Domain %s unmarked as autostarted\n" msgstr "Domain %s als automatisch zu starten demarkiert\n" #: src/virsh.c:454 msgid "(re)connect to hypervisor" msgstr "(Wieder)verbinden mit Hypervisor" #: src/virsh.c:456 msgid "" "Connect to local hypervisor. This is built-in command after shell start up." msgstr "" "Mit lokalem Hypervisor verbinden. Nach dem Start der Shell ist dies ein " "integrierter Befehl." #: src/virsh.c:461 msgid "hypervisor connection URI" msgstr "Hypervisor Verbindungs-URI" #: src/virsh.c:462 msgid "read-only connection" msgstr "Schreibgeschützte Verbindung" #: src/virsh.c:474 msgid "Failed to disconnect from the hypervisor" msgstr "Verbindungsabbruch vom Hypervisor schlug fehl" #: src/virsh.c:493 msgid "Failed to connect to the hypervisor" msgstr "Verbindungsaufbau zum Hypervisor schlug fehl" #: src/virsh.c:504 msgid "connect to the guest console" msgstr "Verbindung mit der Gast-Konsole" #: src/virsh.c:506 msgid "Connect the virtual serial console for the guest" msgstr "Die virtuelle serielle Konsole für den Gast verbinden" #: src/virsh.c:527 #, fuzzy msgid "Failed to get local hostname" msgstr "Versuch, örtliche Systemzeit zu bekommen, gescheitert." #: src/virsh.c:532 #, fuzzy msgid "Failed to get connection hostname" msgstr "Aufbau der DFÜ-Verbindung gescheitert : %s" #: src/virsh.c:537 #, fuzzy msgid "Cannot connect to a remote console device" msgstr "Verbindung mit der Gast-Konsole" #: src/virsh.c:558 #, fuzzy, c-format msgid "Connected to domain %s\n" msgstr "Fehler beim Speichern der Domain: %s" #: src/virsh.c:559 #, fuzzy msgid "Escape character is ^]\n" msgstr "Übersetzung ist &unklar" #: src/virsh.c:563 msgid "No console available for domain\n" msgstr "Keine Konsole für die Domain verfügbar\n" #: src/virsh.c:602 msgid "list domains" msgstr "Domains auflisten" #: src/virsh.c:603 msgid "Returns list of domains." msgstr "Gibt eine Liste der Domains wieder." #: src/virsh.c:608 msgid "list inactive domains" msgstr "Inaktive Domains auflisten" #: src/virsh.c:609 msgid "list inactive & active domains" msgstr "Inaktive & aktive Domains auflisten" #: src/virsh.c:631 src/virsh.c:638 msgid "Failed to list active domains" msgstr "Auflistung aktiver Domains schlug fehl" #: src/virsh.c:649 src/virsh.c:657 msgid "Failed to list inactive domains" msgstr "Auflistung inaktiver Domains schlug fehl" #: src/virsh.c:666 msgid "Id" msgstr "Id" #: src/virsh.c:666 src/virsh.c:2912 src/virsh.c:3188 src/virsh.c:4159 #: src/virsh.c:5122 msgid "Name" msgstr "Name" #: src/virsh.c:666 src/virsh.c:2912 src/virsh.c:3188 src/virsh.c:4159 msgid "State" msgstr "Status" #: src/virsh.c:679 src/virsh.c:701 src/virsh.c:7775 src/virsh.c:7791 msgid "no state" msgstr "Kein Status" #: src/virsh.c:719 msgid "domain state" msgstr "Domain-Status" #: src/virsh.c:720 #, fuzzy msgid "Returns state about a domain." msgstr "Gibt den Status einer laufenden Domain wieder." #: src/virsh.c:755 msgid "get device block stats for a domain" msgstr "Geräteblockstatistiken für eine Domain abrufen" #: src/virsh.c:756 msgid "Get device block stats for a running domain." msgstr "Geräteblockstatistiken einer laufenden Domain abrufen." #: src/virsh.c:762 msgid "block device" msgstr "Blockeinheit" #: src/virsh.c:785 #, c-format msgid "Failed to get block stats %s %s" msgstr "Abrufen der Blockstatistiken %s %s gescheitert" #: src/virsh.c:813 msgid "get network interface stats for a domain" msgstr "Statistiken der Netzwerkschnittstelle für eine Domain abrufen" #: src/virsh.c:814 msgid "Get network interface stats for a running domain." msgstr "" "Statistiken der Netzwerkschnittstelle für eine laufende Domain abrufen." #: src/virsh.c:820 msgid "interface device" msgstr "Schnittstellengerät" #: src/virsh.c:843 #, c-format msgid "Failed to get interface stats %s %s" msgstr "Abruf der Schnittstellenstatistiken %s %s gescheitert" #: src/virsh.c:881 msgid "suspend a domain" msgstr "Eine Domain anhalten" #: src/virsh.c:882 msgid "Suspend a running domain." msgstr "Eine laufende Domain anhalten." #: src/virsh.c:905 #, c-format msgid "Domain %s suspended\n" msgstr "Domain %s angehalten\n" #: src/virsh.c:907 #, c-format msgid "Failed to suspend domain %s" msgstr "Anhalten von Domain %s schlug fehl" #: src/virsh.c:919 msgid "create a domain from an XML file" msgstr "Eine Domain aus einer XML-Datei erstellen" #: src/virsh.c:920 msgid "Create a domain." msgstr "Eine Domain erstellen." #: src/virsh.c:925 src/virsh.c:982 msgid "file containing an XML domain description" msgstr "Datei mit einer XML-Domainbeschreibung" #: src/virsh.c:927 src/virsh.c:1085 msgid "attach to console after creation" msgstr "" #: src/virsh.c:958 #, c-format msgid "Domain %s created from %s\n" msgstr "Domain %s von %s erstellt\n" #: src/virsh.c:966 #, c-format msgid "Failed to create domain from %s" msgstr "Fehler beim Erstellen der Domain von %s" #: src/virsh.c:976 msgid "define (but don't start) a domain from an XML file" msgstr "Definiere (aber starte keine) Domain aus einer XML-Datei" #: src/virsh.c:977 msgid "Define a domain." msgstr "Domain definieren." #: src/virsh.c:1009 #, c-format msgid "Domain %s defined from %s\n" msgstr "Domain %s von %s definiert\n" #: src/virsh.c:1013 #, c-format msgid "Failed to define domain from %s" msgstr "Fehler beim Definieren einer Domain von %s" #: src/virsh.c:1023 msgid "undefine an inactive domain" msgstr "Eine inaktive Domain undefinieren" #: src/virsh.c:1024 msgid "Undefine the configuration for an inactive domain." msgstr "Die Konfiguration einer inaktiven Domain undefinieren." #: src/virsh.c:1029 src/virsh.c:2391 msgid "domain name or uuid" msgstr "Domain-Name oder UUID" #: src/virsh.c:1051 #, c-format msgid "" "a running domain like %s cannot be undefined;\n" "to undefine, first shutdown then undefine using its name or UUID" msgstr "" #: src/virsh.c:1062 #, c-format msgid "Domain %s has been undefined\n" msgstr "Domain %s wurde undefiniert\n" #: src/virsh.c:1064 #, c-format msgid "Failed to undefine domain %s" msgstr "Domain %s konnte nicht undefiniert werden" #: src/virsh.c:1077 msgid "start a (previously defined) inactive domain" msgstr "Eine (zuvor definierte) inaktive Domain starten" #: src/virsh.c:1078 msgid "Start a domain." msgstr "Eine Domain starten." #: src/virsh.c:1083 msgid "name of the inactive domain" msgstr "Name der inaktiven Domain" #: src/virsh.c:1106 msgid "Domain is already active" msgstr "Domain ist bereits aktiv" #: src/virsh.c:1112 #, c-format msgid "Domain %s started\n" msgstr "Domain %s gestartet\n" #: src/virsh.c:1119 #, c-format msgid "Failed to start domain %s" msgstr "Domain %s konnte nicht gestartet werden" #: src/virsh.c:1131 msgid "save a domain state to a file" msgstr "Einen Domainstatus in einer Datei speichern" #: src/virsh.c:1132 msgid "Save a running domain." msgstr "Eine laufende Domain speichern." #: src/virsh.c:1138 msgid "where to save the data" msgstr "Wo die Daten gespeichert werden sollen" #: src/virsh.c:1160 #, c-format msgid "Domain %s saved to %s\n" msgstr "Domain %s nach %s gespeichert\n" #: src/virsh.c:1162 #, c-format msgid "Failed to save domain %s to %s" msgstr "Speichern der Domain %s nach %s gescheitert" #: src/virsh.c:1174 msgid "show/set scheduler parameters" msgstr "Scheduler-Parameter anzeigen/setzen" #: src/virsh.c:1175 msgid "Show/Set scheduler parameters." msgstr "Scheduler-Parameter anzeigen/setzen." #: src/virsh.c:1181 #, fuzzy msgid "parameter=value" msgstr "Unerwarteter Parameter '%s'" #: src/virsh.c:1182 msgid "weight for XEN_CREDIT" msgstr "Gewicht für XEN_CREDIT" #: src/virsh.c:1183 msgid "cap for XEN_CREDIT" msgstr "Cap für XEN_CREDIT" #: src/virsh.c:1201 #, fuzzy msgid "Invalid value of weight" msgstr "ungültiger 'eof()'-Rückgabewert." #: src/virsh.c:1216 #, fuzzy msgid "Invalid value of cap" msgstr "ungültiger 'eof()'-Rückgabewert." #: src/virsh.c:1228 msgid "Invalid syntax for --set, expecting name=value" msgstr "" #: src/virsh.c:1243 #, fuzzy msgid "Invalid value for parameter, expecting an int" msgstr "ungültiger 'eof()'-Rückgabewert." #: src/virsh.c:1250 msgid "Invalid value for parameter, expecting an unsigned int" msgstr "" #: src/virsh.c:1257 msgid "Invalid value for parameter, expecting an long long" msgstr "" #: src/virsh.c:1264 msgid "Invalid value for parameter, expecting an unsigned long long" msgstr "" #: src/virsh.c:1270 #, fuzzy msgid "Invalid value for parameter, expecting a double" msgstr "ungültiger 'eof()'-Rückgabewert." #: src/virsh.c:1304 src/virsh.c:1308 msgid "Scheduler" msgstr "Scheduler" #: src/virsh.c:1308 msgid "Unknown" msgstr "Unbekannt" #: src/virsh.c:1380 msgid "restore a domain from a saved state in a file" msgstr "" "Eine Domain aus einem gespeicherten Status in einer Datei wiederherstellen" #: src/virsh.c:1381 msgid "Restore a domain." msgstr "Eine Domain wiederherstellen." #: src/virsh.c:1386 msgid "the state to restore" msgstr "Wiederherzustellender Status" #: src/virsh.c:1405 #, c-format msgid "Domain restored from %s\n" msgstr "Domain aus %s wiederhergestellt\n" #: src/virsh.c:1407 #, c-format msgid "Failed to restore domain from %s" msgstr "Wiederherstellen der Domain aus %s gescheitert" #: src/virsh.c:1417 msgid "dump the core of a domain to a file for analysis" msgstr "Den Kern einer Domain zu Analysezwecken in eine Datei dumpen" #: src/virsh.c:1418 msgid "Core dump a domain." msgstr "Eine Domain debuggen." #: src/virsh.c:1424 msgid "where to dump the core" msgstr "wo der Kern gespeichert werden sollen" #: src/virsh.c:1446 #, fuzzy, c-format msgid "Domain %s dumped to %s\n" msgstr "Pfad zur DB:" #: src/virsh.c:1448 #, c-format msgid "Failed to core dump domain %s to %s" msgstr "Fehler beim Debuggen der Domain %s nach %s" #: src/virsh.c:1461 msgid "resume a domain" msgstr "Domain fortsetzen" #: src/virsh.c:1462 msgid "Resume a previously suspended domain." msgstr "Eine zuvor angehaltene Domain fortsetzen." #: src/virsh.c:1485 #, c-format msgid "Domain %s resumed\n" msgstr "Domain %s fortgesetzt\n" #: src/virsh.c:1487 #, c-format msgid "Failed to resume domain %s" msgstr "Fortsetzen der Domain %s gescheitert" #: src/virsh.c:1499 msgid "gracefully shutdown a domain" msgstr "Kontrolliertes Stillegen einer Domain" #: src/virsh.c:1500 msgid "Run shutdown in the target domain." msgstr "Herunterfahren in der Ziel-Domain ausführen." #: src/virsh.c:1523 #, c-format msgid "Domain %s is being shutdown\n" msgstr "Domain %s wird heruntergefahren\n" #: src/virsh.c:1525 #, c-format msgid "Failed to shutdown domain %s" msgstr "Herunterfahren der Domain %s gescheitert" #: src/virsh.c:1537 msgid "reboot a domain" msgstr "Domain neu starten" #: src/virsh.c:1538 msgid "Run a reboot command in the target domain." msgstr "Einen Befehl zum Neustart in der Ziel-Domain ausführen." #: src/virsh.c:1561 #, c-format msgid "Domain %s is being rebooted\n" msgstr "Domain %s wird neu gestartet\n" #: src/virsh.c:1563 #, c-format msgid "Failed to reboot domain %s" msgstr "Neustart der Domain %s gescheitert" #: src/virsh.c:1575 msgid "destroy a domain" msgstr "Domain löschen" #: src/virsh.c:1576 msgid "Destroy a given domain." msgstr "Eine bestimmte Domain löschen." #: src/virsh.c:1599 #, c-format msgid "Domain %s destroyed\n" msgstr "Domain %s gelöscht\n" #: src/virsh.c:1601 #, c-format msgid "Failed to destroy domain %s" msgstr "Löschen der Domain %s gescheitert" #: src/virsh.c:1613 msgid "domain information" msgstr "Domain-Informationen" #: src/virsh.c:1614 msgid "Returns basic information about the domain." msgstr "Liefert grundlegende Informationen zur Domain." #: src/virsh.c:1642 src/virsh.c:1644 msgid "Id:" msgstr "Id:" #: src/virsh.c:1645 src/virsh.c:4394 src/virsh.c:5012 msgid "Name:" msgstr "Name:" #: src/virsh.c:1648 src/virsh.c:4397 msgid "UUID:" msgstr "UUID:" #: src/virsh.c:1651 msgid "OS Type:" msgstr "OS Typ:" #: src/virsh.c:1656 src/virsh.c:1814 src/virsh.c:4404 src/virsh.c:4408 #: src/virsh.c:4412 src/virsh.c:4416 msgid "State:" msgstr "Status:" #: src/virsh.c:1659 src/virsh.c:2172 msgid "CPU(s):" msgstr "CPU(s):" #: src/virsh.c:1666 src/virsh.c:1821 msgid "CPU time:" msgstr "CPU-Zeit:" #: src/virsh.c:1670 src/virsh.c:1673 msgid "Max memory:" msgstr "Max Speicher:" #: src/virsh.c:1674 msgid "no limit" msgstr "Kein Limit" #: src/virsh.c:1676 msgid "Used memory:" msgstr "Verwendeter Speicher:" #: src/virsh.c:1684 msgid "Autostart:" msgstr "Automatischer Start:" #: src/virsh.c:1685 msgid "enable" msgstr "aktivieren" #: src/virsh.c:1685 msgid "disable" msgstr "deaktiviert" #: src/virsh.c:1698 #, fuzzy msgid "Security model:" msgstr "Gerät-Modell:" #: src/virsh.c:1699 msgid "Security DOI:" msgstr "" #: src/virsh.c:1708 msgid "Security label:" msgstr "" #: src/virsh.c:1721 msgid "NUMA free memory" msgstr "NUMA freier Speicher" #: src/virsh.c:1722 msgid "display available free memory for the NUMA cell." msgstr "verfügbaren freien Speicher für die NUMA-Zelle anzeigen." #: src/virsh.c:1727 msgid "NUMA cell number" msgstr "NUMA-Zell-Nummer" #: src/virsh.c:1753 msgid "Total" msgstr "Gesamt" #: src/virsh.c:1764 msgid "domain vcpu information" msgstr "Domain vcpu-Information" #: src/virsh.c:1765 msgid "Returns basic information about the domain virtual CPUs." msgstr "Liefert grundlegende Informationen zu den virtuellen CPUs der Domain." #: src/virsh.c:1812 msgid "VCPU:" msgstr "VCPU:" #: src/virsh.c:1813 msgid "CPU:" msgstr "CPU:" #: src/virsh.c:1823 msgid "CPU Affinity:" msgstr "CPU-Affinität:" #: src/virsh.c:1835 msgid "Domain shut off, virtual CPUs not present." msgstr "Domain heruntergefahren, keine virtuellen CPUs vorhanden." #: src/virsh.c:1850 msgid "control domain vcpu affinity" msgstr "Domain vcpu-Affinität kontrollieren" #: src/virsh.c:1851 msgid "Pin domain VCPUs to host physical CPUs." msgstr "Domain VCPUs mit physikalischen CPUs des Hosts verknüpfen." #: src/virsh.c:1857 msgid "vcpu number" msgstr "VCPU-Nummer" #: src/virsh.c:1858 msgid "host cpu number(s) (comma separated)" msgstr "Host-CPU-Nummer(m) (getrennt durch Komma)" #: src/virsh.c:1886 msgid "vcpupin: Invalid or missing vCPU number." msgstr "" #: src/virsh.c:1892 #, fuzzy msgid "vcpupin: Missing cpulist" msgstr "Max. # an fehlenden Worten:" #: src/virsh.c:1904 #, fuzzy msgid "vcpupin: failed to get domain informations." msgstr "Abruf der Platteninformationen gescheitert" #: src/virsh.c:1910 msgid "vcpupin: Invalid vCPU number." msgstr "vcpupin: Ungültige vCPU-Nummer." #: src/virsh.c:1919 msgid "cpulist: Invalid format. Empty string." msgstr "cpulist: Ungültiges Format. Leerer String." #: src/virsh.c:1929 #, c-format msgid "" "cpulist: %s: Invalid format. Expecting digit at position %d (near '%c')." msgstr "" "cpulist: %s: Ungültiges Format. Ziffer an Position %d (nahe '%c') erwartet." #: src/virsh.c:1939 #, c-format msgid "" "cpulist: %s: Invalid format. Expecting digit or comma at position %d (near '%" "c')." msgstr "" "cpulist: %s: Ungültiges Format. Ziffer oder Komma an Position %d (nahe '%c') " "erwartet." #: src/virsh.c:1946 #, c-format msgid "cpulist: %s: Invalid format. Trailing comma at position %d." msgstr "cpulist: %s: Ungültiges Format. Überflüssiges Komma an Position %d." #: src/virsh.c:1960 #, c-format msgid "Physical CPU %d doesn't exist." msgstr "Physikalische CPU '%d' existiert nicht." #: src/virsh.c:1983 msgid "change number of virtual CPUs" msgstr "Anzahl der virtuellen CPUs ändern" #: src/virsh.c:1984 #, fuzzy msgid "Change the number of virtual CPUs in the guest domain." msgstr "Anzahl der in der Gast-Domain aktiven virtuellen CPUs ändern." #: src/virsh.c:1990 msgid "number of virtual CPUs" msgstr "Anzahl der virtuellen CPUs" #: src/virsh.c:2010 msgid "Invalid number of virtual CPUs." msgstr "Ungültige Anzahl virtueller CPUs." #: src/virsh.c:2022 msgid "Too many virtual CPUs." msgstr "Zu viele virtuelle CPUs." #: src/virsh.c:2039 msgid "change memory allocation" msgstr "Speicherzuweisung ändern" #: src/virsh.c:2040 msgid "Change the current memory allocation in the guest domain." msgstr "Die derzeitige Speicherzuweisung in der Gast-Domain ändern." #: src/virsh.c:2046 msgid "number of kilobytes of memory" msgstr "Speichergrösse in Kilobytes" #: src/virsh.c:2067 src/virsh.c:2079 src/virsh.c:2123 #, c-format msgid "Invalid value of %d for memory size" msgstr "Ungültiger Wert von %d für die Speichergrösse" #: src/virsh.c:2073 msgid "Unable to verify MaxMemorySize" msgstr "Maximale Speichergrösse (MaxMemorySize) konnte nicht überprüft werden" #: src/virsh.c:2095 msgid "change maximum memory limit" msgstr "Maximale Speichergrenze ändern" #: src/virsh.c:2096 msgid "Change the maximum memory allocation limit in the guest domain." msgstr "Maximales Limit für die Speicherzuweisung einer Gast-Domain ändern." #: src/virsh.c:2102 msgid "maximum memory limit in kilobytes" msgstr "Maximales Speicherlimit in Kilobytes" #: src/virsh.c:2129 msgid "Unable to verify current MemorySize" msgstr "Derzeitige Speichergrösse (MemorySize) konnte nicht überprüft werden" #: src/virsh.c:2136 msgid "Unable to shrink current MemorySize" msgstr "Aktuelle Speichergrösse (MemorySize) kann nicht verkleinert werden" #: src/virsh.c:2142 msgid "Unable to change MaxMemorySize" msgstr "Maximale Speichergrösse (MaxMemorySize) konnte nicht geändert werden" #: src/virsh.c:2154 msgid "node information" msgstr "Knoteninformation" #: src/virsh.c:2155 msgid "Returns basic information about the node." msgstr "Liefert grundlegende Informationen zum Knoten." #: src/virsh.c:2168 msgid "failed to get node information" msgstr "Abruf der Knoteninformationen scheiterte" #: src/virsh.c:2171 msgid "CPU model:" msgstr "CPU-Modell:" #: src/virsh.c:2173 msgid "CPU frequency:" msgstr "CPU-Frequenz:" #: src/virsh.c:2174 msgid "CPU socket(s):" msgstr "CPU-Socket(s):" #: src/virsh.c:2175 msgid "Core(s) per socket:" msgstr "Kern(e) pro Socket:" #: src/virsh.c:2176 msgid "Thread(s) per core:" msgstr "Thread(s) pro Kern:" #: src/virsh.c:2177 msgid "NUMA cell(s):" msgstr "NUMA-Zelle(n):" #: src/virsh.c:2178 msgid "Memory size:" msgstr "Speichergrösse:" #: src/virsh.c:2187 msgid "capabilities" msgstr "Fähigkeiten" #: src/virsh.c:2188 msgid "Returns capabilities of hypervisor/driver." msgstr "Gibt die Fähigkeiten des Hypervisors/Treibers zurück." #: src/virsh.c:2201 msgid "failed to get capabilities" msgstr "Abrufen der Fähigkeiten gescheitert" #: src/virsh.c:2214 msgid "domain information in XML" msgstr "Domain-Informationen in XML" #: src/virsh.c:2215 msgid "Output the domain information as an XML dump to stdout." msgstr "Ausgabe der Domain-Informationen als XML-Dump nach stdout." #: src/virsh.c:2221 #, fuzzy msgid "show inactive defined XML" msgstr "Keine inaktive Domain" #: src/virsh.c:2222 msgid "include security sensitive information in XML dump" msgstr "" #: src/virsh.c:2263 #, fuzzy msgid "Convert native config to domain XML" msgstr "kann Konfigurationsdatei nicht erstelllen %s: %s" #: src/virsh.c:2264 #, fuzzy msgid "Convert native guest configuration format to domain XML format." msgstr "Die Konfiguration einer inaktiven Domain undefinieren." #: src/virsh.c:2269 msgid "source config data format" msgstr "" #: src/virsh.c:2270 #, fuzzy msgid "config data file to import from" msgstr "Syntaxfehler in der Konfigurationsdatei" #: src/virsh.c:2309 msgid "Convert domain XML to native config" msgstr "" #: src/virsh.c:2310 msgid "Convert domain XML config to a native guest configuration format." msgstr "" #: src/virsh.c:2315 msgid "target config data type format" msgstr "" #: src/virsh.c:2316 msgid "xml data file to export from" msgstr "" #: src/virsh.c:2355 msgid "convert a domain id or UUID to domain name" msgstr "Eine Domain-ID oder UUID in Domain-Namen konvertieren" #: src/virsh.c:2361 msgid "domain id or uuid" msgstr "Domain-ID oder -UUID" #: src/virsh.c:2385 msgid "convert a domain name or UUID to domain id" msgstr "Einen Domain-Namen oder -UUID in Domain-ID konvertieren" #: src/virsh.c:2420 msgid "convert a domain name or id to domain UUID" msgstr "Einen Domain-Namen oder -ID in Domain-UUID konvertieren" #: src/virsh.c:2426 msgid "domain id or name" msgstr "Domain-ID oder -Name" #: src/virsh.c:2445 msgid "failed to get domain UUID" msgstr "Abrufen der Domain-UUID scheiterte" #: src/virsh.c:2455 msgid "migrate domain to another host" msgstr "Domain auf anderen Host migrieren" #: src/virsh.c:2456 msgid "Migrate domain to another host. Add --live for live migration." msgstr "" "Domain auf anderen Host migrieren. --live für Live-Migration hinzufügen." #: src/virsh.c:2461 msgid "live migration" msgstr "Live-Migration" #: src/virsh.c:2463 msgid "connection URI of the destination host" msgstr "Verbindungs-URI des Ziel-Hosts" #: src/virsh.c:2464 msgid "migration URI, usually can be omitted" msgstr "Migrations-URI (kann normalerweise ausgelassen werden)" #: src/virsh.c:2465 msgid "rename to new name during migration (if supported)" msgstr "" #: src/virsh.c:2488 msgid "migrate: Missing desturi" msgstr "migrieren: Fehlende Ziel-URI (desturi)" #: src/virsh.c:2520 msgid "autostart a network" msgstr "Ein Netzwerk automatisch starten" #: src/virsh.c:2522 msgid "Configure a network to be automatically started at boot." msgstr "" "Ein Netzwerk so konfigurieren, dass es beim Booten automatisch gestartet " "wird." #: src/virsh.c:2527 src/virsh.c:3050 msgid "network name or uuid" msgstr "Netzwerk-Name oder UUID" #: src/virsh.c:2549 #, c-format msgid "failed to mark network %s as autostarted" msgstr "Markierung des Netzwerks %s als automatisch zu starten gescheitert" #: src/virsh.c:2552 #, c-format msgid "failed to unmark network %s as autostarted" msgstr "Demarkierung des Netzwerks %s als automatisch zu starten gescheitert" #: src/virsh.c:2559 #, c-format msgid "Network %s marked as autostarted\n" msgstr "Netzwerk %s als automatisch zu starten markiert\n" #: src/virsh.c:2561 #, c-format msgid "Network %s unmarked as autostarted\n" msgstr "Netzwerk %s als automatisch zu starten demarkiert\n" #: src/virsh.c:2571 msgid "create a network from an XML file" msgstr "Netzwerk aus einer XML-Datei erstellen" #: src/virsh.c:2572 msgid "Create a network." msgstr "Ein Netzwerk erstellen." #: src/virsh.c:2577 src/virsh.c:2625 msgid "file containing an XML network description" msgstr "Dateien mit XML-Netzwerkbeschreibung" #: src/virsh.c:2604 #, c-format msgid "Network %s created from %s\n" msgstr "Netzwerk %s von %s erstellt\n" #: src/virsh.c:2608 #, c-format msgid "Failed to create network from %s" msgstr "Fehler beim Erstellen des Netzwerks von %s" #: src/virsh.c:2619 msgid "define (but don't start) a network from an XML file" msgstr "Definiere (aber starte kein) Netzwerk aus einer XML-Datei" #: src/virsh.c:2620 msgid "Define a network." msgstr "Netzwerk definieren." #: src/virsh.c:2652 #, c-format msgid "Network %s defined from %s\n" msgstr "Netzwerk %s von %s definiert\n" #: src/virsh.c:2656 #, c-format msgid "Failed to define network from %s" msgstr "Fehler beim Definieren eines Netzwerks von %s" #: src/virsh.c:2667 msgid "destroy a network" msgstr "Netzwerk löschen" #: src/virsh.c:2668 msgid "Destroy a given network." msgstr "Eine bestimmtes Netzwerk löschen." #: src/virsh.c:2673 src/virsh.c:2712 src/virsh.c:6800 msgid "network name, id or uuid" msgstr "Netzwerkname, ID oder UUID" #: src/virsh.c:2691 #, c-format msgid "Network %s destroyed\n" msgstr "Netzwerk %s gelöscht\n" #: src/virsh.c:2693 #, c-format msgid "Failed to destroy network %s" msgstr "Löschen des Netzwerks %s gescheitert" #: src/virsh.c:2706 msgid "network information in XML" msgstr "Netzwerk-Informationen in XML" #: src/virsh.c:2707 msgid "Output the network information as an XML dump to stdout." msgstr "Ausgabe der Netzwerk-Informationen als XML-Dump nach stdout." #: src/virsh.c:2746 #, fuzzy msgid "edit XML configuration for a physical host interface" msgstr "Die Konfiguration einer inaktiven Domain undefinieren." #: src/virsh.c:2747 #, fuzzy msgid "Edit the XML configuration for a physical host interface." msgstr "Die Konfiguration einer inaktiven Domain undefinieren." #: src/virsh.c:2752 src/virsh.c:3302 src/virsh.c:3388 src/virsh.c:3426 #: src/virsh.c:3464 #, fuzzy msgid "interface name or MAC address" msgstr "Keine Schnittstelle gefunden, deren MAC-Adresse %s ist" #: src/virsh.c:2795 #, fuzzy, c-format msgid "Interface %s XML configuration not changed.\n" msgstr "Konfigurationsdatei konnte nicht gelesen werden" #: src/virsh.c:2811 src/virsh.c:6759 msgid "ERROR: the XML configuration was changed by another user" msgstr "" #: src/virsh.c:2821 #, fuzzy, c-format msgid "Interface %s XML configuration edited.\n" msgstr "Konfigurationsdatei konnte nicht gelesen werden" #: src/virsh.c:2846 msgid "list networks" msgstr "Netzwerke auflisten" #: src/virsh.c:2847 msgid "Returns list of networks." msgstr "Gibt eine Liste der Netzwerke wieder." #: src/virsh.c:2852 msgid "list inactive networks" msgstr "Inaktive Netzwerke auflisten" #: src/virsh.c:2853 msgid "list inactive & active networks" msgstr "Inaktive & aktive Netzwerke auflisten" #: src/virsh.c:2873 src/virsh.c:2881 msgid "Failed to list active networks" msgstr "Auflistung aktiver Netzwerke schlug fehl" #: src/virsh.c:2892 src/virsh.c:2903 msgid "Failed to list inactive networks" msgstr "Auflistung inaktiver Netzwerke schlug fehl" #: src/virsh.c:2913 src/virsh.c:4159 msgid "Autostart" msgstr "Automatischer Start" #: src/virsh.c:2929 src/virsh.c:2952 src/virsh.c:4174 src/virsh.c:4197 msgid "no autostart" msgstr "Kein automatischer Start" #: src/virsh.c:2935 src/virsh.c:3204 src/virsh.c:4180 msgid "active" msgstr "Aktiv" #: src/virsh.c:2958 src/virsh.c:3221 src/virsh.c:4203 src/virsh.c:4405 msgid "inactive" msgstr "Inaktiv" #: src/virsh.c:2974 msgid "convert a network UUID to network name" msgstr "Eine Netzwerk-UUID in einen Netzwerk-Namen konvertieren" #: src/virsh.c:2980 msgid "network uuid" msgstr "Netzwerk-UUID" #: src/virsh.c:3005 msgid "start a (previously defined) inactive network" msgstr "Ein (zuvor definiertes) inaktives Netzwerk starten" #: src/virsh.c:3006 msgid "Start a network." msgstr "Ein Netzwerk starten." #: src/virsh.c:3011 msgid "name of the inactive network" msgstr "Name des inaktiven Netzwerks" #: src/virsh.c:3028 #, c-format msgid "Network %s started\n" msgstr "Netzwerk %s gestartet\n" #: src/virsh.c:3031 #, c-format msgid "Failed to start network %s" msgstr "Netzwerk %s konnte nicht gestartet werden" #: src/virsh.c:3044 msgid "undefine an inactive network" msgstr "Ein inaktives Netzwerk undefinieren" #: src/virsh.c:3045 msgid "Undefine the configuration for an inactive network." msgstr "Die Konfiguration eines inaktiven Netzwerks undefinieren." #: src/virsh.c:3068 #, c-format msgid "Network %s has been undefined\n" msgstr "Netzwerk %s wurde undefiniert\n" #: src/virsh.c:3070 #, c-format msgid "Failed to undefine network %s" msgstr "Netzwerk %s konnte nicht undefiniert werden" #: src/virsh.c:3083 msgid "convert a network name to network UUID" msgstr "Einen Netzwerk-Namen in eine Netzwerk-UUID konvertieren" #: src/virsh.c:3089 msgid "network name" msgstr "Netzwerk-Namen" #: src/virsh.c:3109 msgid "failed to get network UUID" msgstr "Abrufen der Netzwerk-UUID scheiterte" #: src/virsh.c:3121 msgid "list physical host interfaces" msgstr "" #: src/virsh.c:3122 #, fuzzy msgid "Returns list of physical host interfaces." msgstr "Gibt eine Liste der Domains wieder." #: src/virsh.c:3127 #, fuzzy msgid "list inactive interfaces" msgstr "Inaktive Netzwerke auflisten" #: src/virsh.c:3128 #, fuzzy msgid "list inactive & active interfaces" msgstr "Inaktive & aktive Netzwerke auflisten" #: src/virsh.c:3147 src/virsh.c:3156 #, fuzzy msgid "Failed to list active interfaces" msgstr "Auflistung aktiver Netzwerke schlug fehl" #: src/virsh.c:3168 src/virsh.c:3179 #, fuzzy msgid "Failed to list inactive interfaces" msgstr "Auflistung inaktiver Netzwerke schlug fehl" #: src/virsh.c:3189 #, fuzzy msgid "MAC Address" msgstr "MAC-Adresse" #: src/virsh.c:3236 #, fuzzy msgid "convert an interface MAC address to interface name" msgstr "Keine Schnittstelle gefunden, deren MAC-Adresse %s ist" #: src/virsh.c:3242 #, fuzzy msgid "interface mac" msgstr "Schnittstellengerät" #: src/virsh.c:3266 #, fuzzy msgid "convert an interface name to interface MAC address" msgstr "Keine Schnittstelle gefunden, deren MAC-Adresse %s ist" #: src/virsh.c:3272 #, fuzzy msgid "interface name" msgstr "Schnittstellengerät" #: src/virsh.c:3296 #, fuzzy msgid "interface information in XML" msgstr "Netzwerk-Informationen in XML" #: src/virsh.c:3297 #, fuzzy msgid "" "Output the physical host interface information as an XML dump to stdout." msgstr "Ausgabe der Domain-Informationen als XML-Dump nach stdout." #: src/virsh.c:3335 #, fuzzy msgid "define (but don't start) a physical host interface from an XML file" msgstr "Definiere (aber starte keine) Domain aus einer XML-Datei" #: src/virsh.c:3336 msgid "Define a physical host interface." msgstr "" #: src/virsh.c:3341 #, fuzzy msgid "file containing an XML interface description" msgstr "Dateien mit XML-Netzwerkbeschreibung" #: src/virsh.c:3368 #, fuzzy, c-format msgid "Interface %s defined from %s\n" msgstr "Netzwerk %s von %s definiert\n" #: src/virsh.c:3372 #, fuzzy, c-format msgid "Failed to define interface from %s" msgstr "Fehler beim Definieren eines Netzwerks von %s" #: src/virsh.c:3382 msgid "undefine a physical host interface (remove it from configuration)" msgstr "" #: src/virsh.c:3383 #, fuzzy msgid "undefine an interface." msgstr "Erzeuge Speicher-Pool..." #: src/virsh.c:3406 #, fuzzy, c-format msgid "Interface %s undefined\n" msgstr "Schnittstellengerät" #: src/virsh.c:3408 #, fuzzy, c-format msgid "Failed to undefine interface %s" msgstr "Netzwerk wurde nicht gefunden: %s" #: src/virsh.c:3420 msgid "start a physical host interface (enable it / \"if-up\")" msgstr "" #: src/virsh.c:3421 msgid "start a physical host interface." msgstr "" #: src/virsh.c:3444 #, fuzzy, c-format msgid "Interface %s started\n" msgstr "Netzwerk %s gestartet\n" #: src/virsh.c:3446 #, fuzzy, c-format msgid "Failed to start interface %s" msgstr "Netzwerk %s konnte nicht gestartet werden" #: src/virsh.c:3458 msgid "destroy a physical host interface (disable it / \"if-down\")" msgstr "" #: src/virsh.c:3459 msgid "destroy a physical host interface." msgstr "" #: src/virsh.c:3482 #, fuzzy, c-format msgid "Interface %s destroyed\n" msgstr "Netzwerk %s gelöscht\n" #: src/virsh.c:3484 #, fuzzy, c-format msgid "Failed to destroy interface %s" msgstr "Löschen des Netzwerks %s gescheitert" #: src/virsh.c:3497 #, fuzzy msgid "autostart a pool" msgstr "Fehler beim automatischen Start des Pools: %s" #: src/virsh.c:3499 #, fuzzy msgid "Configure a pool to be automatically started at boot." msgstr "" "Eine Domain so konfigurieren, dass sie beim Booten automatisch gestartet " "wird." #: src/virsh.c:3504 src/virsh.c:3906 src/virsh.c:3945 src/virsh.c:3984 #: src/virsh.c:4023 src/virsh.c:4062 src/virsh.c:4376 src/virsh.c:4643 #: src/virsh.c:4876 src/virsh.c:4953 src/virsh.c:4994 src/virsh.c:5045 #: src/virsh.c:5086 src/virsh.c:5230 src/virsh.c:6817 msgid "pool name or uuid" msgstr "Pool-Name oder UUID" #: src/virsh.c:3526 #, fuzzy, c-format msgid "failed to mark pool %s as autostarted" msgstr "Markierung des Netzwerks %s als automatisch zu starten gescheitert" #: src/virsh.c:3529 #, fuzzy, c-format msgid "failed to unmark pool %s as autostarted" msgstr "Demarkierung des Netzwerks %s als automatisch zu starten gescheitert" #: src/virsh.c:3536 #, fuzzy, c-format msgid "Pool %s marked as autostarted\n" msgstr "TSINFO: %s Paket benötigt %s markiert als gelöscht" #: src/virsh.c:3538 #, fuzzy, c-format msgid "Pool %s unmarked as autostarted\n" msgstr "Domain %s als automatisch zu starten demarkiert\n" #: src/virsh.c:3548 #, fuzzy msgid "create a pool from an XML file" msgstr "Sicherheitskopie der xml-Datei konnte nicht erstellt werden" #: src/virsh.c:3549 src/virsh.c:3771 msgid "Create a pool." msgstr "Erzeuge einen Pool." #: src/virsh.c:3555 src/virsh.c:3817 #, fuzzy msgid "file containing an XML pool description" msgstr "Datei mit einer XML-Domainbeschreibung" #: src/virsh.c:3582 #, fuzzy, c-format msgid "Pool %s created from %s\n" msgstr "&Aus Quelltexten aktualisieren" #: src/virsh.c:3586 #, c-format msgid "Failed to create pool from %s" msgstr "Erzeugen eines Pools aus %s fehlgeschlagen" #: src/virsh.c:3597 #, fuzzy msgid "create a device defined by an XML file on the node" msgstr "Eine Domain aus einer XML-Datei erstellen" #: src/virsh.c:3599 msgid "" "Create a device on the node. Note that this command creates devices on the " "physical host that can then be assigned to a virtual machine." msgstr "" #: src/virsh.c:3607 #, fuzzy msgid "file containing an XML description of the device" msgstr "Datei mit einer XML-Domainbeschreibung" #: src/virsh.c:3636 #, fuzzy, c-format msgid "Node device %s created from %s\n" msgstr "&Aus Quelltexten aktualisieren" #: src/virsh.c:3640 #, fuzzy, c-format msgid "Failed to create node device from %s" msgstr "Erstellung des DDE-Zeichenkette gescheitert" #: src/virsh.c:3652 #, fuzzy msgid "destroy a device on the node" msgstr "NUMA wird auf diesem Rechner nicht unterstützt" #: src/virsh.c:3653 msgid "" "Destroy a device on the node. Note that this command destroys devices on " "the physical host " msgstr "" #: src/virsh.c:3660 #, fuzzy msgid "name of the device to be destroyed" msgstr "Name des inaktiven Netzwerks" #: src/virsh.c:3684 #, fuzzy, c-format msgid "Destroyed node device '%s'\n" msgstr "Gerättypen-Feld" #: src/virsh.c:3686 #, fuzzy, c-format msgid "Failed to destroy node device '%s'" msgstr "Auflistung inaktiver Domains schlug fehl" #: src/virsh.c:3699 msgid "name of the pool" msgstr "Name des Pools" #: src/virsh.c:3700 msgid "print XML document, but don't define/create" msgstr "" #: src/virsh.c:3701 msgid "type of the pool" msgstr "Typ des Pools" #: src/virsh.c:3702 msgid "source-host for underlying storage" msgstr "" #: src/virsh.c:3703 msgid "source path for underlying storage" msgstr "" #: src/virsh.c:3704 msgid "source device for underlying storage" msgstr "" #: src/virsh.c:3705 msgid "source name for underlying storage" msgstr "" #: src/virsh.c:3706 msgid "target for underlying storage" msgstr "" #: src/virsh.c:3753 src/virsh.c:4609 src/virsh.c:4914 #, fuzzy msgid "Failed to allocate XML buffer" msgstr "Bildpuffer von %u Byte konnte nicht bereitgestellt werden" #: src/virsh.c:3770 #, fuzzy msgid "create a pool from a set of args" msgstr "Eine Domain aus einer XML-Datei erstellen" #: src/virsh.c:3796 #, c-format msgid "Pool %s created\n" msgstr "Pool %s erstellt\n" #: src/virsh.c:3799 #, c-format msgid "Failed to create pool %s" msgstr "Erzeugen des Pools %s fehlgeschlagen" #: src/virsh.c:3811 #, fuzzy msgid "define (but don't start) a pool from an XML file" msgstr "Definiere (aber starte keine) Domain aus einer XML-Datei" #: src/virsh.c:3812 src/virsh.c:3860 msgid "Define a pool." msgstr "Definiere einen Pool." #: src/virsh.c:3844 #, c-format msgid "Pool %s defined from %s\n" msgstr "Pool %s definiert von %s\n" #: src/virsh.c:3848 #, c-format msgid "Failed to define pool from %s" msgstr "Definieren eines Pools aus %s fehlgeschlagen" #: src/virsh.c:3859 msgid "define a pool from a set of args" msgstr "" #: src/virsh.c:3885 #, c-format msgid "Pool %s defined\n" msgstr "Pool %s definiert\n" #: src/virsh.c:3888 #, c-format msgid "Failed to define pool %s" msgstr "Definieren des Pools %s fehlgeschlagen" #: src/virsh.c:3900 msgid "build a pool" msgstr "baue einen Pool" #: src/virsh.c:3901 msgid "Build a given pool." msgstr "Einen gegebenen Pool gebaut." #: src/virsh.c:3924 #, fuzzy, c-format msgid "Pool %s built\n" msgstr "Füge Pool hinzu" #: src/virsh.c:3926 #, fuzzy, c-format msgid "Failed to build pool %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/virsh.c:3939 msgid "destroy a pool" msgstr "Zerstören eines Pools" #: src/virsh.c:3940 msgid "Destroy a given pool." msgstr "Zerstöre einen angegebenen Pool." #: src/virsh.c:3963 #, c-format msgid "Pool %s destroyed\n" msgstr "Pool %s zerstört\n" #: src/virsh.c:3965 #, fuzzy, c-format msgid "Failed to destroy pool %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/virsh.c:3978 msgid "delete a pool" msgstr "Pool löschen" #: src/virsh.c:3979 #, fuzzy msgid "Delete a given pool." msgstr "Erzeuge Speicher-Pool..." #: src/virsh.c:4002 #, c-format msgid "Pool %s deleted\n" msgstr "Pool %s gelöscht\n" #: src/virsh.c:4004 #, fuzzy, c-format msgid "Failed to delete pool %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/virsh.c:4017 msgid "refresh a pool" msgstr "Einen Pool aktualisieren" #: src/virsh.c:4018 #, fuzzy msgid "Refresh a given pool." msgstr "Erzeuge Speicher-Pool..." #: src/virsh.c:4041 #, c-format msgid "Pool %s refreshed\n" msgstr "Pool %s aktualisiert\n" #: src/virsh.c:4043 #, c-format msgid "Failed to refresh pool %s" msgstr "Aktualisieren des Pools fehlgeschlagen %s" #: src/virsh.c:4056 msgid "pool information in XML" msgstr "Pool-Informationen in XML" #: src/virsh.c:4057 #, fuzzy msgid "Output the pool information as an XML dump to stdout." msgstr "Ausgabe der Domain-Informationen als XML-Dump nach stdout." #: src/virsh.c:4096 msgid "list pools" msgstr "Poolliste" #: src/virsh.c:4097 #, fuzzy msgid "Returns list of pools." msgstr "&Gefärbte Übersetzungsliste" #: src/virsh.c:4102 msgid "list inactive pools" msgstr "Inaktive Pools auflisten" #: src/virsh.c:4103 #, fuzzy msgid "list inactive & active pools" msgstr "Liste der aktiven GTK-Module" #: src/virsh.c:4123 src/virsh.c:4131 #, fuzzy msgid "Failed to list active pools" msgstr "Auflistung aktiver Domains schlug fehl" #: src/virsh.c:4142 src/virsh.c:4150 #, fuzzy msgid "Failed to list inactive pools" msgstr "Auflistung inaktiver Domains schlug fehl" #: src/virsh.c:4218 #, fuzzy msgid "find potential storage pool sources" msgstr "Ungültiger Verbindungszeiger in %s" #: src/virsh.c:4219 src/virsh.c:4299 msgid "Returns XML document." msgstr "" #: src/virsh.c:4225 #, fuzzy msgid "type of storage pool sources to find" msgstr "zu viele Treiber registriert" #: src/virsh.c:4226 msgid "optional host to query" msgstr "" #: src/virsh.c:4227 msgid "optional port to query" msgstr "" #: src/virsh.c:4272 #, fuzzy msgid "Out of memory" msgstr "nicht genug Speicher." #: src/virsh.c:4275 #, fuzzy, c-format msgid "virAsprintf failed (errno %d)" msgstr "Befehlsausführung '%s' schlug fehl" #: src/virsh.c:4284 src/virsh.c:4335 #, fuzzy, c-format msgid "Failed to find any %s pool sources" msgstr "Definieren des Pools %s fehlgeschlagen" #: src/virsh.c:4298 msgid "discover potential storage pool sources" msgstr "" #: src/virsh.c:4305 #, fuzzy msgid "type of storage pool sources to discover" msgstr "zu viele Treiber registriert" #: src/virsh.c:4307 msgid "optional file of source xml to query for pools" msgstr "" #: src/virsh.c:4370 #, fuzzy msgid "storage pool information" msgstr "Erzeuge Speicher-Pool..." #: src/virsh.c:4371 #, fuzzy msgid "Returns basic information about the storage pool." msgstr "Liefert grundlegende Informationen zum Knoten." #: src/virsh.c:4409 msgid "building" msgstr "bauen" #: src/virsh.c:4413 src/virsh.c:7761 src/virsh.c:7787 msgid "running" msgstr "laufend" #: src/virsh.c:4417 msgid "degraded" msgstr "" #: src/virsh.c:4424 src/virsh.c:5022 msgid "Capacity:" msgstr "Kapazität:" #: src/virsh.c:4427 src/virsh.c:5025 msgid "Allocation:" msgstr "Zuordnung:" #: src/virsh.c:4430 msgid "Available:" msgstr "Verfügbar:" #: src/virsh.c:4445 msgid "convert a pool UUID to pool name" msgstr "Konvertieren einer pool-UUID in einen Pool-Namen" #: src/virsh.c:4451 msgid "pool uuid" msgstr "Pool-UUID" #: src/virsh.c:4476 #, fuzzy msgid "start a (previously defined) inactive pool" msgstr "Eine (zuvor definierte) inaktive Domain starten" #: src/virsh.c:4477 msgid "Start a pool." msgstr "Start einen Pool." #: src/virsh.c:4482 msgid "name of the inactive pool" msgstr "Name eines inaktiven Pools" #: src/virsh.c:4499 #, c-format msgid "Pool %s started\n" msgstr "Pool %s gestartet\n" #: src/virsh.c:4502 #, fuzzy, c-format msgid "Failed to start pool %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/virsh.c:4516 #, fuzzy msgid "create a volume from a set of args" msgstr "Eine Domain aus einer XML-Datei erstellen" #: src/virsh.c:4517 src/virsh.c:4714 msgid "Create a vol." msgstr "Erzeugen eines Datenträger." #: src/virsh.c:4522 src/virsh.c:4682 src/virsh.c:4719 src/virsh.c:4777 msgid "pool name" msgstr "Pool-Name" #: src/virsh.c:4523 msgid "name of the volume" msgstr "Name des Datenträger" #: src/virsh.c:4524 msgid "size of the vol with optional k,M,G,T suffix" msgstr "" #: src/virsh.c:4525 msgid "initial allocation size with optional k,M,G,T suffix" msgstr "" #: src/virsh.c:4526 msgid "file format type raw,bochs,qcow,qcow2,vmdk" msgstr "" #: src/virsh.c:4584 src/virsh.c:4589 #, fuzzy, c-format msgid "Malformed size %s" msgstr "&Aktuelle Größe" #: src/virsh.c:4618 #, c-format msgid "Vol %s created\n" msgstr "Datenträger %s erzeugt\n" #: src/virsh.c:4622 #, fuzzy, c-format msgid "Failed to create vol %s" msgstr "Cursor konnte nicht erzeugt werden" #: src/virsh.c:4637 #, fuzzy msgid "undefine an inactive pool" msgstr "Erzeuge Speicher-Pool..." #: src/virsh.c:4638 #, fuzzy msgid "Undefine the configuration for an inactive pool." msgstr "Die Konfiguration einer inaktiven Domain undefinieren." #: src/virsh.c:4661 #, fuzzy, c-format msgid "Pool %s has been undefined\n" msgstr "***Ein Fehlerbericht wurde erstellt\n" #: src/virsh.c:4663 #, fuzzy, c-format msgid "Failed to undefine pool %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/virsh.c:4676 #, fuzzy msgid "convert a pool name to pool UUID" msgstr "Einen Netzwerk-Namen in eine Netzwerk-UUID konvertieren" #: src/virsh.c:4702 #, fuzzy msgid "failed to get pool UUID" msgstr "Konnte ISP Namen '%s' nicht ermitteln" #: src/virsh.c:4713 #, fuzzy msgid "create a vol from an XML file" msgstr "Sicherheitskopie der xml-Datei konnte nicht erstellt werden" #: src/virsh.c:4720 src/virsh.c:4778 #, fuzzy msgid "file containing an XML vol description" msgstr "Datei mit einer XML-Domainbeschreibung" #: src/virsh.c:4757 #, fuzzy, c-format msgid "Vol %s created from %s\n" msgstr "&Aus Quelltexten aktualisieren" #: src/virsh.c:4761 src/virsh.c:4818 #, fuzzy, c-format msgid "Failed to create vol from %s" msgstr "Erstellung des DDE-Zeichenkette gescheitert" #: src/virsh.c:4771 msgid "create a vol, using another volume as input" msgstr "" #: src/virsh.c:4772 #, fuzzy msgid "Create a vol from an existing volume." msgstr "Sicherheitskopie der xml-Datei konnte nicht erstellt werden" #: src/virsh.c:4779 #, fuzzy msgid "pool name or uuid of the input volume's pool" msgstr "Name eines inaktiven Pools" #: src/virsh.c:4780 #, fuzzy msgid "input vol name or key" msgstr "

Ihr menschlicher Name oder \"Wirklicher-Leben\"-Name

" #: src/virsh.c:4815 #, fuzzy, c-format msgid "Vol %s created from input vol %s\n" msgstr "&Aus Quelltexten aktualisieren" #: src/virsh.c:4870 #, fuzzy msgid "clone a volume." msgstr "Name des Datenträger" #: src/virsh.c:4871 msgid "Clone an existing volume." msgstr "" #: src/virsh.c:4877 #, fuzzy msgid "orig vol name or key" msgstr "

Ihr menschlicher Name oder \"Wirklicher-Leben\"-Name

" #: src/virsh.c:4878 #, fuzzy msgid "clone name" msgstr "Allgemeiner Name:" #: src/virsh.c:4900 #, fuzzy msgid "failed to get parent pool" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/virsh.c:4921 #, fuzzy, c-format msgid "Vol %s cloned from %s\n" msgstr "&Aus Quelltexten aktualisieren" #: src/virsh.c:4924 #, fuzzy, c-format msgid "Failed to clone vol from %s" msgstr "Erstellung des DDE-Zeichenkette gescheitert" #: src/virsh.c:4947 msgid "delete a vol" msgstr "Löschen eines Datenträgers" #: src/virsh.c:4948 #, fuzzy msgid "Delete a given vol." msgstr "Fehler beim Anlegen des Datenträgers: %s" #: src/virsh.c:4954 src/virsh.c:4995 src/virsh.c:5046 msgid "vol name, key or path" msgstr "" #: src/virsh.c:4973 #, c-format msgid "Vol %s deleted\n" msgstr "Datenträger %s gelöscht\n" #: src/virsh.c:4975 #, fuzzy, c-format msgid "Failed to delete vol %s" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/virsh.c:4988 #, fuzzy msgid "storage vol information" msgstr "Fehler beim Anlegen des Datenträgers: %s" #: src/virsh.c:4989 #, fuzzy msgid "Returns basic information about the storage vol." msgstr "Liefert grundlegende Informationen zum Knoten." #: src/virsh.c:5017 msgid "Type:" msgstr "Typ:" #: src/virsh.c:5019 msgid "file" msgstr "Datei" #: src/virsh.c:5019 #, fuzzy msgid "block" msgstr "Block" #: src/virsh.c:5039 #, fuzzy msgid "vol information in XML" msgstr "Debug-Informationen im &Nachrichtenprotokoll:" #: src/virsh.c:5040 #, fuzzy msgid "Output the vol information as an XML dump to stdout." msgstr "Ausgabe der Domain-Informationen als XML-Dump nach stdout." #: src/virsh.c:5080 #, fuzzy msgid "list vols" msgstr "Dateiliste" #: src/virsh.c:5081 #, fuzzy msgid "Returns list of vols by pool." msgstr "Gibt eine Liste der Domains wieder." #: src/virsh.c:5106 src/virsh.c:5114 #, fuzzy msgid "Failed to list active vols" msgstr "Auflistung aktiver Domains schlug fehl" #: src/virsh.c:5122 msgid "Path" msgstr "Pfad" #: src/virsh.c:5158 #, fuzzy msgid "convert a vol UUID to vol name" msgstr "Eine Netzwerk-UUID in einen Netzwerk-Namen konvertieren" #: src/virsh.c:5164 #, fuzzy msgid "vol key or path" msgstr "Unterschreiben oder bearbeiten eines Schl." #: src/virsh.c:5191 #, fuzzy msgid "convert a vol UUID to vol key" msgstr "Eine Netzwerk-UUID in einen Netzwerk-Namen konvertieren" #: src/virsh.c:5197 msgid "vol uuid" msgstr "Vol-UUID" #: src/virsh.c:5224 #, fuzzy msgid "convert a vol UUID to vol path" msgstr "Gewähltes Objekt in Pfad umwandeln" #: src/virsh.c:5231 #, fuzzy msgid "vol name or key" msgstr "

Ihr menschlicher Name oder \"Wirklicher-Leben\"-Name

" #: src/virsh.c:5261 msgid "show version" msgstr "Version anzeigen" #: src/virsh.c:5262 msgid "Display the system version information." msgstr "Informationen zur Systemversion anzeigen." #: src/virsh.c:5285 msgid "failed to get hypervisor type" msgstr "Abrufen des Hypervisor-Typs scheiterte" #: src/virsh.c:5294 #, c-format msgid "Compiled against library: libvir %d.%d.%d\n" msgstr "Kompiliert gegen die Bibliothek: libvir %d.%d.%d\n" #: src/virsh.c:5299 msgid "failed to get the library version" msgstr "Abrufen der Bibliotheksversion scheiterte" #: src/virsh.c:5306 #, c-format msgid "Using library: libvir %d.%d.%d\n" msgstr "Verwende Bibliothek: libvir %d.%d.%d\n" #: src/virsh.c:5313 #, c-format msgid "Using API: %s %d.%d.%d\n" msgstr "Verwende API: %s %d.%d.%d\n" #: src/virsh.c:5318 msgid "failed to get the hypervisor version" msgstr "Abruf der Hypervisorversion scheiterte" #: src/virsh.c:5323 #, c-format msgid "Cannot extract running %s hypervisor version\n" msgstr "Kann laufende %s Hypervisorversion nicht ermitteln\n" #: src/virsh.c:5330 #, c-format msgid "Running hypervisor: %s %d.%d.%d\n" msgstr "Laufender Hypervisor: %s %d.%d.%d\n" #: src/virsh.c:5340 #, fuzzy msgid "enumerate devices on this host" msgstr "NUMA wird auf diesem Rechner nicht unterstützt" #: src/virsh.c:5346 #, fuzzy msgid "list devices in a tree" msgstr "Ein Eintrag in der Schlüsselwortliste:" #: src/virsh.c:5347 #, fuzzy msgid "capability name" msgstr "Projektname:" #: src/virsh.c:5448 #, fuzzy msgid "Failed to count node devices" msgstr "Verbindungsaufbau zum Hypervisor schlug fehl" #: src/virsh.c:5458 #, fuzzy msgid "Failed to list node devices" msgstr "Auflistung inaktiver Domains schlug fehl" #: src/virsh.c:5508 msgid "node device details in XML" msgstr "" #: src/virsh.c:5509 #, fuzzy msgid "Output the node device details as an XML dump to stdout." msgstr "Ausgabe der Domain-Informationen als XML-Dump nach stdout." #: src/virsh.c:5515 src/virsh.c:5558 src/virsh.c:5599 src/virsh.c:5640 #, fuzzy msgid "device key" msgstr "Sende Taste" #: src/virsh.c:5531 src/virsh.c:5574 src/virsh.c:5615 src/virsh.c:5656 #, fuzzy msgid "Could not find matching device" msgstr "Konnte Ressourcendatei %s nicht finden." #: src/virsh.c:5551 #, fuzzy msgid "dettach node device from its device driver" msgstr "Neues Plattengerät anhängen." #: src/virsh.c:5552 #, fuzzy msgid "" "Dettach node device from its device driver before assigning to a domain." msgstr "Geräteblockstatistiken einer laufenden Domain abrufen." #: src/virsh.c:5579 #, fuzzy, c-format msgid "Device %s dettached\n" msgstr "Boot-Gerät" #: src/virsh.c:5581 #, fuzzy, c-format msgid "Failed to dettach device %s" msgstr "NAT für das physikalische Gerät %s" #: src/virsh.c:5592 #, fuzzy msgid "reattach node device to its device driver" msgstr "Neues Plattengerät anhängen." #: src/virsh.c:5593 #, fuzzy msgid "Reattach node device to its device driver once released by the domain." msgstr "Neues Plattengerät anhängen." #: src/virsh.c:5620 #, fuzzy, c-format msgid "Device %s re-attached\n" msgstr "Gerättypen-Feld" #: src/virsh.c:5622 #, fuzzy, c-format msgid "Failed to re-attach device %s" msgstr "Fehler beim Anhängen des Geräts von %s" #: src/virsh.c:5633 #, fuzzy msgid "reset node device" msgstr "Gerättypen-Feld" #: src/virsh.c:5634 #, fuzzy msgid "Reset node device before or after assigning to a domain." msgstr "Geräteblockstatistiken einer laufenden Domain abrufen." #: src/virsh.c:5661 #, fuzzy, c-format msgid "Device %s reset\n" msgstr "Boot-Gerät" #: src/virsh.c:5663 #, fuzzy, c-format msgid "Failed to reset device %s" msgstr "NAT für das physikalische Gerät %s" #: src/virsh.c:5674 msgid "print the hypervisor hostname" msgstr "Hypervisor-Hostname ausgeben" #: src/virsh.c:5689 msgid "failed to get hostname" msgstr "Abrufen des Hostnames scheiterte" #: src/virsh.c:5703 msgid "print the hypervisor canonical URI" msgstr "Kanonisierte URI des Hypervisors ausgeben" #: src/virsh.c:5718 msgid "failed to get URI" msgstr "Abrufen der URI scheiterte" #: src/virsh.c:5732 msgid "vnc display" msgstr "VNC-Anzeige" #: src/virsh.c:5733 msgid "Output the IP address and port number for the VNC display." msgstr "Ausgabe der IP-Adresse und der Portnummer für die VNC-Anzeige." #: src/virsh.c:5807 msgid "tty console" msgstr "TTY-Konsole" #: src/virsh.c:5808 msgid "Output the device for the TTY console." msgstr "Gerät für die TTY-Konsole ausgeben." #: src/virsh.c:5868 msgid "attach device from an XML file" msgstr "Gerät aus einer XML-Datei anhängen" #: src/virsh.c:5869 msgid "Attach device from an XML ." msgstr "Gerät aus einer XML anhängen ." #: src/virsh.c:5875 src/virsh.c:5933 msgid "XML file" msgstr "XML-Datei" #: src/virsh.c:5896 msgid "attach-device: Missing option" msgstr "attach-device: Fehlende Option" #: src/virsh.c:5910 #, c-format msgid "Failed to attach device from %s" msgstr "Fehler beim Anhängen des Geräts von %s" #: src/virsh.c:5914 #, fuzzy msgid "Device attached successfully\n" msgstr "Gerättypen-Feld" #: src/virsh.c:5926 msgid "detach device from an XML file" msgstr "Gerät von einer XML-Datei lösen" #: src/virsh.c:5927 msgid "Detach device from an XML " msgstr "Gerät von einer XML- lösen" #: src/virsh.c:5954 msgid "detach-device: Missing option" msgstr "detach-device: Fehlende Option" #: src/virsh.c:5968 #, c-format msgid "Failed to detach device from %s" msgstr "Fehler beim Lösen des Geräts von %s" #: src/virsh.c:5972 #, fuzzy msgid "Device detached successfully\n" msgstr "Gerättypen-Feld" #: src/virsh.c:5984 msgid "attach network interface" msgstr "Netzwerkschnittstelle verbinden" #: src/virsh.c:5985 msgid "Attach new network interface." msgstr "Neue Netzwerkschnittstelle verbinden." #: src/virsh.c:5991 src/virsh.c:6107 msgid "network interface type" msgstr "Netzwerkschnittstellentyp" #: src/virsh.c:5992 msgid "source of network interface" msgstr "Quelle der Netzwerkschnittstelle" #: src/virsh.c:5993 msgid "target network name" msgstr "Ziel-Netzwerk-Name" #: src/virsh.c:5994 src/virsh.c:6108 msgid "MAC address" msgstr "MAC-Adresse" #: src/virsh.c:5995 msgid "script used to bridge network interface" msgstr "Skript zur Überbrückung einer Netzwerkschnittstelle" #: src/virsh.c:6027 #, c-format msgid "No support %s in command 'attach-interface'" msgstr "Keine %s Unterstützung im Befehl 'attach-interface'" #: src/virsh.c:6083 #, fuzzy msgid "Interface attached successfully\n" msgstr "Virtuelle Netzwerkschnittstelle" #: src/virsh.c:6100 msgid "detach network interface" msgstr "Netzwerkschnittstelle abhängen" #: src/virsh.c:6101 msgid "Detach network interface." msgstr "Netzwerkschnittstelle abtrennen" #: src/virsh.c:6146 src/virsh.c:6151 msgid "Failed to get interface information" msgstr "Abruf der Schnittstelleninformationen gescheitert" #: src/virsh.c:6159 #, c-format msgid "No found interface whose type is %s" msgstr "Keine Schnittstelle gefunden, deren Typ %s ist" #: src/virsh.c:6181 #, c-format msgid "No found interface whose MAC address is %s" msgstr "Keine Schnittstelle gefunden, deren MAC-Adresse %s ist" #: src/virsh.c:6187 src/virsh.c:6456 msgid "Failed to allocate memory" msgstr "Speicherzuweisung gescheitert" #: src/virsh.c:6192 src/virsh.c:6461 msgid "Failed to create XML" msgstr "Erstellen von XML gescheitert" #: src/virsh.c:6200 #, fuzzy msgid "Interface detached successfully\n" msgstr "Virtuelle Netzwerkschnittstelle" #: src/virsh.c:6220 msgid "attach disk device" msgstr "Plattengerät anhängen" #: src/virsh.c:6221 msgid "Attach new disk device." msgstr "Neues Plattengerät anhängen." #: src/virsh.c:6227 msgid "source of disk device" msgstr "Quelle des Plattengeräts" #: src/virsh.c:6228 src/virsh.c:6384 msgid "target of disk device" msgstr "Ziel des Plattengeräts" #: src/virsh.c:6229 msgid "driver of disk device" msgstr "Treiber des Plattengeräts" #: src/virsh.c:6230 msgid "subdriver of disk device" msgstr "Subtreiber des Plattengeräts" #: src/virsh.c:6231 msgid "target device type" msgstr "Ziel-Gerätetyp" #: src/virsh.c:6232 msgid "mode of device reading and writing" msgstr "Modus für das Lesen und Schreiben von Geräten" #: src/virsh.c:6265 src/virsh.c:6272 #, c-format msgid "No support %s in command 'attach-disk'" msgstr "Keine %s Unterstützung im Befehl 'attach-disk'" #: src/virsh.c:6361 #, fuzzy msgid "Disk attached successfully\n" msgstr "Normale Platten_partition:" #: src/virsh.c:6377 msgid "detach disk device" msgstr "Plattengerät abtrennen" #: src/virsh.c:6378 msgid "Detach disk device." msgstr "Plattengerät abtrennen." #: src/virsh.c:6419 src/virsh.c:6424 src/virsh.c:6431 msgid "Failed to get disk information" msgstr "Abruf der Platteninformationen gescheitert" #: src/virsh.c:6450 #, c-format msgid "No found disk whose target is %s" msgstr "Keine Platte gefunden, deren Ziel %s ist" #: src/virsh.c:6469 #, fuzzy msgid "Disk detached successfully\n" msgstr "Normale Platten_partition:" #: src/virsh.c:6496 #, fuzzy, c-format msgid "malloc: failed to allocate temporary file name: %s" msgstr "Speicherzuweisung gescheitert" #: src/virsh.c:6507 #, fuzzy, c-format msgid "mkstemp: failed to create temporary file: %s" msgstr "Konnte keinen vorübergehenden Dateinamen erstellen." #: src/virsh.c:6514 #, fuzzy, c-format msgid "write: %s: failed to write to temporary file: %s" msgstr "Konnte vorübergehende Datei nicht öffnen." #: src/virsh.c:6523 #, fuzzy, c-format msgid "close: %s: failed to write or close temporary file: %s" msgstr "Fehler beim Schreiben der xml-Datei" #: src/virsh.c:6553 #, c-format msgid "" "%s: $EDITOR environment variable contains shell meta or other unacceptable " "characters" msgstr "" #: src/virsh.c:6560 #, c-format msgid "" "%s: temporary filename contains shell meta or other unacceptable characters " "(is $TMPDIR wrong?)" msgstr "" #: src/virsh.c:6567 #, c-format msgid "virAsprintf: could not create editing command: %s" msgstr "" #: src/virsh.c:6575 #, fuzzy, c-format msgid "%s: edit command failed: %s" msgstr "Befehlsausführung '%s' schlug fehl" #: src/virsh.c:6581 #, fuzzy, c-format msgid "%s: command exited with non-zero status" msgstr "Befehlsausführung '%s' schlug fehl mit Fehler: %ul" #: src/virsh.c:6596 #, fuzzy, c-format msgid "%s: failed to read temporary file: %s" msgstr "Konnte vorübergehende Datei nicht öffnen." #: src/virsh.c:6609 #, fuzzy msgid "change the current directory" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/virsh.c:6610 #, fuzzy msgid "Change the current directory." msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/virsh.c:6615 msgid "directory to switch to (default: home or else root)" msgstr "" #: src/virsh.c:6627 msgid "cd: command valid only in interactive mode" msgstr "" #: src/virsh.c:6640 #, c-format msgid "cd: %s: %s" msgstr "" #: src/virsh.c:6654 #, fuzzy msgid "print the current directory" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/virsh.c:6655 #, fuzzy msgid "Print the current directory." msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/virsh.c:6678 #, fuzzy, c-format msgid "pwd: cannot get current directory: %s" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/virsh.c:6680 #, c-format msgid "%s\n" msgstr "" #: src/virsh.c:6691 #, fuzzy msgid "edit XML configuration for a domain" msgstr "Die Konfiguration einer inaktiven Domain undefinieren." #: src/virsh.c:6692 #, fuzzy msgid "Edit the XML configuration for a domain." msgstr "Die Konfiguration einer inaktiven Domain undefinieren." #: src/virsh.c:6743 #, c-format msgid "Domain %s XML configuration not changed.\n" msgstr "" #: src/virsh.c:6769 #, fuzzy, c-format msgid "Domain %s XML configuration edited.\n" msgstr "Konfigurationsdatei konnte nicht gelesen werden" #: src/virsh.c:6794 #, fuzzy msgid "edit XML configuration for a network" msgstr "Die Konfiguration eines inaktiven Netzwerks undefinieren." #: src/virsh.c:6795 #, fuzzy msgid "Edit the XML configuration for a network." msgstr "Die Konfiguration eines inaktiven Netzwerks undefinieren." #: src/virsh.c:6811 #, fuzzy msgid "edit XML configuration for a storage pool" msgstr "Die Konfiguration einer inaktiven Domain undefinieren." #: src/virsh.c:6812 #, fuzzy msgid "Edit the XML configuration for a storage pool." msgstr "Die Konfiguration einer inaktiven Domain undefinieren." #: src/virsh.c:6828 msgid "quit this interactive terminal" msgstr "Dieses interaktive Terminal beenden" #: src/virsh.c:7038 #, c-format msgid "command '%s' requires <%s> option" msgstr "Befehl '%s' erfordert <%s> Option" #: src/virsh.c:7039 #, c-format msgid "command '%s' requires --%s option" msgstr "Befehl '%s' erfordert --%s Option" #: src/virsh.c:7066 #, c-format msgid "command '%s' doesn't exist" msgstr "Befehl '%s' existiert nicht" #: src/virsh.c:7073 msgid " NAME\n" msgstr " NAME\n" #: src/virsh.c:7076 msgid "" "\n" " SYNOPSIS\n" msgstr "" "\n" " SYNOPSIS\n" #: src/virsh.c:7085 #, c-format msgid "[--%s ]" msgstr "[--%s ]" #: src/virsh.c:7087 #, c-format msgid "[--%s ]" msgstr "[--%s ]" #: src/virsh.c:7100 msgid "" "\n" " DESCRIPTION\n" msgstr "" "\n" " BESCHREIBUNG\n" #: src/virsh.c:7106 msgid "" "\n" " OPTIONS\n" msgstr "" "\n" " OPTIONEN\n" #: src/virsh.c:7111 #, c-format msgid "--%s " msgstr "--%s " #: src/virsh.c:7113 #, c-format msgid "--%s " msgstr "--%s " #: src/virsh.c:7266 #, c-format msgid "internal error: virsh %s: no %s VSH_OT_DATA option" msgstr "" #: src/virsh.c:7283 msgid "undefined domain name or id" msgstr "Nicht definierter Domain-Name oder -ID" #: src/virsh.c:7315 #, c-format msgid "failed to get domain '%s'" msgstr "Abruf der Domain '%s' scheiterte" #: src/virsh.c:7331 msgid "undefined network name" msgstr "Nicht definierter Domain-Name oder -ID" #: src/virsh.c:7355 #, c-format msgid "failed to get network '%s'" msgstr "Abruf des Netzwerks '%s' scheiterte" #: src/virsh.c:7371 #, fuzzy msgid "undefined interface identifier" msgstr "Ungültiger Verbindungszeiger in" #: src/virsh.c:7395 #, fuzzy, c-format msgid "failed to get interface '%s'" msgstr "Abruf des Netzwerks '%s' scheiterte" #: src/virsh.c:7408 src/virsh.c:7454 #, fuzzy msgid "undefined pool name" msgstr "Ungültiger Verzeichnisname" #: src/virsh.c:7432 #, fuzzy, c-format msgid "failed to get pool '%s'" msgstr "Konnte ISP Namen '%s' nicht ermitteln" #: src/virsh.c:7449 msgid "undefined vol name" msgstr "Nicht definierter Volumen-Name" #: src/virsh.c:7485 #, fuzzy, c-format msgid "failed to get vol '%s'" msgstr "Konnte ISP Namen '%s' nicht ermitteln" #: src/virsh.c:7519 #, c-format msgid "" "\n" "(Time: %.3f ms)\n" "\n" msgstr "" "\n" "(Zeit: %.3f ms)\n" "\n" #: src/virsh.c:7593 msgid "missing \"" msgstr "fehlendes \"" #: src/virsh.c:7654 #, c-format msgid "unexpected token (command name): '%s'" msgstr "Unerwarteter Token (Befehlsname): '%s'" #: src/virsh.c:7659 #, c-format msgid "unknown command: '%s'" msgstr "Unbekannter Befehl: '%s'" #: src/virsh.c:7666 #, c-format msgid "command '%s' doesn't support option --%s" msgstr "Befehl '%s' unterstützt die Option --%s nicht" #: src/virsh.c:7681 #, c-format msgid "expected syntax: --%s <%s>" msgstr "Erwartete Syntax: --%s <%s>" #: src/virsh.c:7684 msgid "number" msgstr "Nummer" #: src/virsh.c:7684 msgid "string" msgstr "String" #: src/virsh.c:7690 #, c-format msgid "unexpected data '%s'" msgstr "Unerwartete Daten '%s'" #: src/virsh.c:7712 msgid "OPTION" msgstr "OPTION" #: src/virsh.c:7712 msgid "DATA" msgstr "DATEN" #: src/virsh.c:7763 src/virsh.c:7785 #, fuzzy msgid "idle" msgstr "Datei" #: src/virsh.c:7765 msgid "paused" msgstr "pausiert" #: src/virsh.c:7767 msgid "in shutdown" msgstr "beim Herunterfahren" #: src/virsh.c:7769 msgid "shut off" msgstr "ausschalten" #: src/virsh.c:7771 msgid "crashed" msgstr "abgestürzt" #: src/virsh.c:7783 msgid "offline" msgstr "offline" #: src/virsh.c:7802 msgid "no valid connection" msgstr "keine gültige Verbindung" #: src/virsh.c:7849 #, c-format msgid "%s: error: " msgstr "%s: Fehler: " #: src/virsh.c:7851 msgid "error: " msgstr "Fehler: " #: src/virsh.c:7873 src/virsh.c:7885 src/virsh.c:7898 #, c-format msgid "%s: %d: failed to allocate %d bytes" msgstr "%s: %d: scheiterte beim Zuweisen von %d Bytes" #: src/virsh.c:7912 #, c-format msgid "%s: %d: failed to allocate %lu bytes" msgstr "%s: %d: scheiterte beim Zuweisen von %lu Bytes" #: src/virsh.c:7942 msgid "failed to connect to the hypervisor" msgstr "Verbindung zum Hypervisor scheiterte" #: src/virsh.c:7974 msgid "failed to get the log file information" msgstr "Log-Datei Informationen konnten nicht abgerufen werden" #: src/virsh.c:7979 msgid "the log path is not a file" msgstr "der Log-Pfad ist keine Datei" #: src/virsh.c:7986 msgid "failed to open the log file. check the log file path" msgstr "" "Fehler beim Öffnen der Log-Datei. Überprüfen Sie den Pfad der Log-Datei" #: src/virsh.c:8054 msgid "failed to write the log file" msgstr "Fehler beim Schreiben der Log-Datei" #: src/virsh.c:8069 #, fuzzy, c-format msgid "%s: failed to write log file: %s" msgstr "Konnte Sperr-Datei '%s' nicht schreiben" #: src/virsh.c:8249 #, fuzzy msgid "failed to disconnect from the hypervisor" msgstr "Konnte Daten nicht aus der Zwischenablage kopieren" #: src/virsh.c:8264 #, c-format msgid "" "\n" "%s [options] [commands]\n" "\n" " options:\n" " -c | --connect hypervisor connection URI\n" " -r | --readonly connect readonly\n" " -d | --debug debug level [0-5]\n" " -h | --help this help\n" " -q | --quiet quiet mode\n" " -t | --timing print timing information\n" " -l | --log output logging to file\n" " -v | --version program version\n" "\n" " commands (non interactive mode):\n" msgstr "" "\n" "%s [options] [commands]\n" "\n" " options:\n" " -c | --connect hypervisor connection URI\n" " -r | --readonly connect readonly\n" " -d | --debug debug level [0-5]\n" " -h | --help this help\n" " -q | --quiet quiet mode\n" " -t | --timing print timing information\n" " -l | --log output logging to file\n" " -v | --version program version\n" "\n" " commands (non interactive mode):\n" #: src/virsh.c:8282 msgid "" "\n" " (specify help for details about the command)\n" "\n" msgstr "" "\n" " (geben Sie help an, um Details zum Befehl zu erhalten)\n" "\n" #: src/virsh.c:8375 #, c-format msgid "unsupported option '-%c'. See --help." msgstr "Nicht unterstützte Option '-%c'. Siehe --help." #: src/virsh.c:8383 #, c-format msgid "extra argument '%s'. See --help." msgstr "" #: src/virsh.c:8465 #, c-format msgid "" "Welcome to %s, the virtualization interactive terminal.\n" "\n" msgstr "" "Willkommen bei %s, dem interaktiven Virtualisierungsterminal.\n" "\n" #: src/virsh.c:8468 msgid "" "Type: 'help' for help with commands\n" " 'quit' to quit\n" "\n" msgstr "" "Tippen Sie: 'help' für eine Hilfe zu den Befehlen\n" " 'quit' zum Beenden\n" "\n" #: src/virterror.c:220 #, fuzzy msgid "Unknown failure" msgstr ": unbekannter Zeichensatz" #: src/virterror.c:534 msgid "warning" msgstr "Warnung" #: src/virterror.c:537 msgid "error" msgstr "Fehler" #: src/virterror.c:671 msgid "No error message provided" msgstr "Keine Fehlermeldung beigefügt" #: src/virterror.c:734 #, c-format msgid "internal error %s" msgstr "Interner Fehler %s" #: src/virterror.c:736 msgid "internal error" msgstr "Interner Fehler" #: src/virterror.c:739 msgid "out of memory" msgstr "zu wenig Arbeitsspeicher" #: src/virterror.c:743 msgid "this function is not supported by the hypervisor" msgstr "Diese Funktion wird vom Hypervisor nicht unterstützt" #: src/virterror.c:745 #, c-format msgid "this function is not supported by the hypervisor: %s" msgstr "Diese Funktion wird vom Hypervisor nicht unterstützt: %s" #: src/virterror.c:749 #, fuzzy msgid "no hypervisor driver available" msgstr "Keine Möglickeit mit XBM umzugehen!" #: src/virterror.c:751 #, fuzzy, c-format msgid "no hypervisor driver available for %s" msgstr "Keine Möglickeit mit XBM umzugehen!" #: src/virterror.c:755 msgid "invalid connection pointer in" msgstr "ungültiger Verbindungszeiger in" #: src/virterror.c:757 #, c-format msgid "invalid connection pointer in %s" msgstr "ungültiger Verbindungszeiger in %s" #: src/virterror.c:761 msgid "invalid domain pointer in" msgstr "ungültiger Domain-Zeiger in" #: src/virterror.c:763 #, c-format msgid "invalid domain pointer in %s" msgstr "ungültiger Domain-Zeiger in %s" #: src/virterror.c:767 msgid "invalid argument in" msgstr "ungültiger Parameter in" #: src/virterror.c:769 #, c-format msgid "invalid argument in %s" msgstr "ungültiger Parameter in %s" #: src/virterror.c:773 #, c-format msgid "operation failed: %s" msgstr "Operation schlug fehl: %s" #: src/virterror.c:775 msgid "operation failed" msgstr "Operation schlug fehl" #: src/virterror.c:779 #, c-format msgid "GET operation failed: %s" msgstr "GET-Operation schlug fehl: %s" #: src/virterror.c:781 msgid "GET operation failed" msgstr "GET-Operation schlug fehl" #: src/virterror.c:785 #, c-format msgid "POST operation failed: %s" msgstr "POST-Operation schlug fehl: %s" #: src/virterror.c:787 msgid "POST operation failed" msgstr "POST-Operation schlug fehl" #: src/virterror.c:790 #, c-format msgid "got unknown HTTP error code %d" msgstr "unbekannter HTTP-Fehlercode %d aufgetreten" #: src/virterror.c:794 #, c-format msgid "unknown host %s" msgstr "unbekannter Host %s" #: src/virterror.c:796 msgid "unknown host" msgstr "unbekannter Host" #: src/virterror.c:800 #, c-format msgid "failed to serialize S-Expr: %s" msgstr "Serialisierung von S-Expr schlug fehl: %s" #: src/virterror.c:802 msgid "failed to serialize S-Expr" msgstr "Serialisierung von S-Expr schlug fehl" #: src/virterror.c:806 msgid "could not use Xen hypervisor entry" msgstr "konnte Xen-Hypervisoreintrag nicht verwenden" #: src/virterror.c:808 #, c-format msgid "could not use Xen hypervisor entry %s" msgstr "konnte Xen-Hypervisoreintrag %s nicht verwenden" #: src/virterror.c:812 msgid "could not connect to Xen Store" msgstr "Verbindung mit Xen-Store schlug fehl" #: src/virterror.c:814 #, c-format msgid "could not connect to Xen Store %s" msgstr "Verbindung mit Xen-Store %s schlug fehl" #: src/virterror.c:817 #, fuzzy, c-format msgid "failed Xen syscall %s" msgstr "Befehlsausführung '%s' schlug fehl" #: src/virterror.c:821 msgid "unknown OS type" msgstr "unbekannter OS-Typ" #: src/virterror.c:823 #, c-format msgid "unknown OS type %s" msgstr "unbekannter OS-Typ %s" #: src/virterror.c:826 msgid "missing kernel information" msgstr "fehlende Kernelinformationen" #: src/virterror.c:830 msgid "missing root device information" msgstr "fehlende Root-Device-Informationen" #: src/virterror.c:832 #, c-format msgid "missing root device information in %s" msgstr "fehlende Root-Device-Informationen in %s" #: src/virterror.c:836 msgid "missing source information for device" msgstr "fehlende Quellinformationen für das Gerät" #: src/virterror.c:838 #, c-format msgid "missing source information for device %s" msgstr "fehlende Quellinformationen für das Gerät %s" #: src/virterror.c:842 msgid "missing target information for device" msgstr "fehlende Zielinformationen für das Gerät" #: src/virterror.c:844 #, c-format msgid "missing target information for device %s" msgstr "fehlende Zielinformationen für das Gerät %s" #: src/virterror.c:848 msgid "missing domain name information" msgstr "fehlende Domainnamen-Informationen" #: src/virterror.c:850 #, c-format msgid "missing domain name information in %s" msgstr "fehlende Domainnamen-Informationen in %s" #: src/virterror.c:854 msgid "missing operating system information" msgstr "fehlende Betriebssysteminformationen" #: src/virterror.c:856 #, c-format msgid "missing operating system information for %s" msgstr "fehlende Betriebssysteminformationen für %s" #: src/virterror.c:860 msgid "missing devices information" msgstr "fehlende Geräteinformationen" #: src/virterror.c:862 #, c-format msgid "missing devices information for %s" msgstr "fehlende Geräteinformationen für %s" #: src/virterror.c:866 msgid "too many drivers registered" msgstr "zu viele Treiber registriert" #: src/virterror.c:868 #, c-format msgid "too many drivers registered in %s" msgstr "zu viele Treiber in %s registriert" #: src/virterror.c:872 msgid "library call failed, possibly not supported" msgstr "Bibliotheksaufruf schlug fehl, möglicherweise nicht unterstützt" #: src/virterror.c:874 #, c-format msgid "library call %s failed, possibly not supported" msgstr "Bibliotheksaufruf %s schlug fehl, möglicherweise nicht unterstützt" #: src/virterror.c:878 msgid "XML description not well formed or invalid" msgstr "XML-Beschreibung nicht sauber formuliert oder ungültig" #: src/virterror.c:880 #, c-format msgid "XML description for %s is not well formed or invalid" msgstr "XML-Beschreibung für %s nicht sauber formuliert oder ungültig" #: src/virterror.c:884 msgid "this domain exists already" msgstr "Diese Domain existiert bereits" #: src/virterror.c:886 #, c-format msgid "domain %s exists already" msgstr "Domain %s existiert bereits" #: src/virterror.c:890 msgid "operation forbidden for read only access" msgstr "Operation für schreibgeschützten Zugriff verboten" #: src/virterror.c:892 #, c-format msgid "operation %s forbidden for read only access" msgstr "Operation %s für schreibgeschützten Zugriff verboten" #: src/virterror.c:896 msgid "failed to open configuration file for reading" msgstr "Öffnen der Konfiguration zu Lesezwecken schlug fehl" #: src/virterror.c:898 #, c-format msgid "failed to open %s for reading" msgstr "Öffnen von %s zu Lesezwecken schlug fehl" #: src/virterror.c:902 msgid "failed to read configuration file" msgstr "Konfigurationsdatei konnte nicht gelesen werden" #: src/virterror.c:904 #, c-format msgid "failed to read configuration file %s" msgstr "Konfigurationsdatei %s konnte nicht gelesen werden" #: src/virterror.c:908 msgid "failed to parse configuration file" msgstr "Konfigurationsdatei konnte nicht analysiert werden" #: src/virterror.c:910 #, c-format msgid "failed to parse configuration file %s" msgstr "Konfigurationsdatei %s konnte nicht analysiert werden" #: src/virterror.c:914 msgid "configuration file syntax error" msgstr "Syntaxfehler in der Konfigurationsdatei" #: src/virterror.c:916 #, c-format msgid "configuration file syntax error: %s" msgstr "Syntaxfehler in der Konfigurationsdatei: %s" #: src/virterror.c:920 msgid "failed to write configuration file" msgstr "Schreiben der Konfigurationsdatei schlug fehl" #: src/virterror.c:922 #, c-format msgid "failed to write configuration file: %s" msgstr "Schreiben der Konfigurationsdatei schlug fehl: %s" #: src/virterror.c:926 msgid "parser error" msgstr "Analyse-Fehler" #: src/virterror.c:932 msgid "invalid network pointer in" msgstr "Ungültiger Verbindungszeiger in" #: src/virterror.c:934 #, c-format msgid "invalid network pointer in %s" msgstr "Ungültiger Verbindungszeiger in %s" #: src/virterror.c:938 msgid "this network exists already" msgstr "Diese Domain existiert bereits" #: src/virterror.c:940 #, c-format msgid "network %s exists already" msgstr "Netzwerk %s existiert bereits" #: src/virterror.c:944 msgid "system call error" msgstr "Fehler beim Systemaufruf" #: src/virterror.c:950 msgid "RPC error" msgstr "RPC-Fehler" #: src/virterror.c:956 msgid "GNUTLS call error" msgstr "GNUTLS Aufruffehler" #: src/virterror.c:962 msgid "Failed to find the network" msgstr "Netzwerk wurde nicht gefunden" #: src/virterror.c:964 #, c-format msgid "Failed to find the network: %s" msgstr "Netzwerk wurde nicht gefunden: %s" #: src/virterror.c:968 msgid "Domain not found" msgstr "Domain nicht gefunden" #: src/virterror.c:970 #, c-format msgid "Domain not found: %s" msgstr "Domain nicht gefunden: %s" #: src/virterror.c:974 msgid "Network not found" msgstr "Netzwerk nicht gefunden" #: src/virterror.c:976 #, c-format msgid "Network not found: %s" msgstr "Netzwerk nicht gefunden: %s" #: src/virterror.c:980 msgid "invalid MAC address" msgstr "ungültige MAC-Adresse" #: src/virterror.c:982 #, c-format msgid "invalid MAC address: %s" msgstr "ungültige MAC-Adresse: %s" #: src/virterror.c:986 msgid "authentication failed" msgstr "Authentifikation gescheitert" #: src/virterror.c:988 #, c-format msgid "authentication failed: %s" msgstr "Authentifikation gescheitert: %s" #: src/virterror.c:992 msgid "Storage pool not found" msgstr "Speicher-Pool nicht gefunden" #: src/virterror.c:994 #, c-format msgid "Storage pool not found: %s" msgstr "SPeicher-Pool nicht gefunden: %s" #: src/virterror.c:998 #, fuzzy msgid "Storage volume not found" msgstr "ISO-Pfad nicht gefunden" #: src/virterror.c:1000 #, fuzzy, c-format msgid "Storage volume not found: %s" msgstr "ISO-Pfad nicht gefunden" #: src/virterror.c:1004 #, fuzzy msgid "invalid storage pool pointer in" msgstr "Ungültiger Verbindungszeiger in" #: src/virterror.c:1006 #, fuzzy, c-format msgid "invalid storage pool pointer in %s" msgstr "Ungültiger Verbindungszeiger in %s" #: src/virterror.c:1010 #, fuzzy msgid "invalid storage volume pointer in" msgstr "Ungültiger Verbindungszeiger in" #: src/virterror.c:1012 #, fuzzy, c-format msgid "invalid storage volume pointer in %s" msgstr "Ungültiger Verbindungszeiger in %s" #: src/virterror.c:1016 #, fuzzy msgid "Failed to find a storage driver" msgstr "Netzwerk wurde nicht gefunden" #: src/virterror.c:1018 #, fuzzy, c-format msgid "Failed to find a storage driver: %s" msgstr "Netzwerk wurde nicht gefunden: %s" #: src/virterror.c:1022 #, fuzzy msgid "Failed to find a node driver" msgstr "Netzwerk wurde nicht gefunden" #: src/virterror.c:1024 #, fuzzy, c-format msgid "Failed to find a node driver: %s" msgstr "Netzwerk wurde nicht gefunden: %s" #: src/virterror.c:1028 #, fuzzy msgid "invalid node device pointer" msgstr "Ungültige XRC-Resource '%s': Kein Wurzel-Knoten 'resource'." #: src/virterror.c:1030 #, fuzzy, c-format msgid "invalid node device pointer in %s" msgstr "ungültiger Domain-Zeiger in %s" #: src/virterror.c:1034 #, fuzzy msgid "Node device not found" msgstr "ISO-Pfad nicht gefunden" #: src/virterror.c:1036 #, fuzzy, c-format msgid "Node device not found: %s" msgstr "ISO-Pfad nicht gefunden" #: src/virterror.c:1040 #, fuzzy msgid "Security model not found" msgstr "ISO-Pfad nicht gefunden" #: src/virterror.c:1042 #, fuzzy, c-format msgid "Security model not found: %s" msgstr "ISO-Pfad nicht gefunden" #: src/virterror.c:1046 #, fuzzy msgid "Requested operation is not valid" msgstr "Suspend-Operation gescheitert" #: src/virterror.c:1048 #, fuzzy, c-format msgid "Requested operation is not valid: %s" msgstr "Operation schlug fehl: %s" #: src/virterror.c:1052 #, fuzzy msgid "Failed to find the interface" msgstr "Netzwerk wurde nicht gefunden" #: src/virterror.c:1054 #, fuzzy, c-format msgid "Failed to find the interface: %s" msgstr "Netzwerk wurde nicht gefunden: %s" #: src/virterror.c:1058 #, fuzzy msgid "Interface not found" msgstr "Netzwerk nicht gefunden" #: src/virterror.c:1060 #, fuzzy, c-format msgid "Interface not found: %s" msgstr "SPeicher-Pool nicht gefunden: %s" #: src/virterror.c:1064 #, fuzzy msgid "invalid interface pointer in" msgstr "Ungültiger Verbindungszeiger in" #: src/virterror.c:1066 #, fuzzy, c-format msgid "invalid interface pointer in %s" msgstr "Ungültiger Verbindungszeiger in %s" #: src/virterror.c:1070 msgid "multiple matching interfaces found" msgstr "" #: src/virterror.c:1072 #, fuzzy, c-format msgid "multiple matching interfaces found: %s" msgstr "Netzwerk wurde nicht gefunden: %s" #: src/virterror.c:1076 #, fuzzy msgid "Failed to find a secret storage driver" msgstr "Netzwerk wurde nicht gefunden" #: src/virterror.c:1078 #, fuzzy, c-format msgid "Failed to find a secret storage driver: %s" msgstr "Netzwerk wurde nicht gefunden: %s" #: src/virterror.c:1082 #, fuzzy msgid "Invalid secret" msgstr "Ungültiger FV OS-Typ" #: src/virterror.c:1084 #, fuzzy, c-format msgid "Invalid secret: %s" msgstr "GIF: Ungültiger Index." #: src/virterror.c:1162 #, fuzzy msgid "internal error: buffer too small" msgstr "Puffer zu klein für Windowsverzeichnis." #: src/xen_inotify.c:132 src/xen_inotify.c:207 #, fuzzy, c-format msgid "parsing uuid %s" msgstr "UUID-Feld" #: src/xen_inotify.c:149 #, fuzzy, c-format msgid "finding dom for %s" msgstr "Suche nach Benutzer" #: src/xen_inotify.c:158 msgid "finding dom on config list" msgstr "" #: src/xen_inotify.c:243 #, fuzzy msgid "Error looking up domain" msgstr "Fehler beim Beziehen der Domain-Details: %s" #: src/xen_inotify.c:250 src/xen_inotify.c:343 src/xen_inotify.c:350 #, fuzzy msgid "Error adding file to config cache" msgstr "Fehler beim Parsen der Optionen." #: src/xen_inotify.c:296 msgid "conn, or private data is NULL" msgstr "" #: src/xen_inotify.c:339 src/xen_inotify.c:362 #, fuzzy msgid "looking up dom" msgstr "Fehler beim Beziehen der Domain-Details: %s" #: src/xen_inotify.c:401 #, fuzzy msgid "failed to allocate configInfoList" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/xen_inotify.c:408 #, fuzzy, c-format msgid "cannot open directory: %s" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/xen_inotify.c:426 #, fuzzy msgid "Error adding file to config list" msgstr "Fehler beim Parsen der Optionen." #: src/xen_inotify.c:436 #, fuzzy msgid "initializing inotify" msgstr "Fehler beim Initialisieren der Rechtschreibprüfung: %s" #: src/xen_inotify.c:447 #, fuzzy, c-format msgid "adding watch on %s" msgstr "Win32s on Windows 3.1" #: src/xen_internal.c:1321 #, c-format msgid "Credit scheduler weight parameter (%d) is out of range (1-65535)" msgstr "" "Der Gewicht-Parameter (%d) des Credit-Schedulers liegt ausserhalb der " "Reichweite (1-65535)" #: src/xen_internal.c:1330 #, c-format msgid "Credit scheduler cap parameter (%d) is out of range (0-65535)" msgstr "" "Cap-Parameter (%d) des Credit-Schedulers liegt ausserhalb der Reichweite (0-" "65535)" #: src/xen_internal.c:2576 src/xen_internal.c:2587 #, fuzzy, c-format msgid "cannot read file %s" msgstr "Konnte Datei \"%s\" nicht öffnen" #: src/xen_unified.c:257 #, c-format msgid "unexpected Xen URI path '%s', try xen:///" msgstr "" #: src/xen_unified.c:275 #, c-format msgid "unexpected Xen URI path '%s', try ///var/lib/xen/xend-socket" msgstr "" #: src/xen_unified.c:292 #, fuzzy msgid "cannot initialise mutex" msgstr "Konnte einen Mutex nicht freigeben." #: src/xend_internal.c:127 msgid "failed to create a socket" msgstr "Erzeugen eines Socket fehlgeschlagen" #: src/xend_internal.c:150 msgid "failed to connect to xend" msgstr "Verbinden zu xend fehlgeschlagen" #: src/xend_internal.c:197 src/xend_internal.c:200 msgid "failed to read from Xen Daemon" msgstr "Lesen vom Xen-Daemon scheiterte" #: src/xend_internal.c:388 #, fuzzy, c-format msgid "%d status from xen daemon: %s:%s" msgstr "xend_post: Fehler von xen-Daemon: %s" #: src/xend_internal.c:439 src/xend_internal.c:442 src/xend_internal.c:450 #, c-format msgid "xend_post: error from xen daemon: %s" msgstr "xend_post: Fehler von xen-Daemon: %s" #: src/xend_internal.c:845 #, fuzzy, c-format msgid "unable to connect to '%s:%s'" msgstr "Kann GTK nicht initialisieren: " #: src/xend_internal.c:963 msgid "failed to urlencode the create S-Expr" msgstr "urlencode bei erstellter S-Expr schlug fehl" #: src/xend_internal.c:1004 msgid "domain information incomplete, missing domid" msgstr "Domaininformation unvollständig, fehlende domid" #: src/xend_internal.c:1010 msgid "domain information incorrect domid not numeric" msgstr "Domaininformation inkorrekt, domid nicht numerisch" #: src/xend_internal.c:1015 src/xend_internal.c:1062 msgid "domain information incomplete, missing uuid" msgstr "Domaininformation unvollständig, fehlende uuid" #: src/xend_internal.c:1054 src/xend_internal.c:2339 src/xend_internal.c:2346 msgid "domain information incomplete, missing name" msgstr "Domaininformation unvollständig, fehlender Name" #: src/xend_internal.c:1143 #, fuzzy msgid "domain information incomplete, missing HVM loader" msgstr "Domaininformation unvollständig, fehlender Name" #: src/xend_internal.c:1197 msgid "domain information incomplete, missing kernel & bootloader" msgstr "Domaininformation unvollständig, fehlender Kernel & Bootloader" #: src/xend_internal.c:1261 #, fuzzy msgid "Unknown char device type" msgstr "Typ des RAS-Bilds unbekannt" #: src/xend_internal.c:1295 src/xend_internal.c:1335 src/xend_internal.c:1351 #: src/xend_internal.c:1489 src/xend_internal.c:1517 src/xend_internal.c:1533 #, fuzzy msgid "malformed char device string" msgstr "Stiller Modus einschalten" #: src/xend_internal.c:1462 #, fuzzy, c-format msgid "unknown chr device type '%s'" msgstr "Typ des RAS-Bilds unbekannt" #: src/xend_internal.c:1624 msgid "domain information incomplete, vbd has no dev" msgstr "Domaininformation unvollständig, vbd besitzt kein dev" #: src/xend_internal.c:1635 msgid "domain information incomplete, vbd has no src" msgstr "Domaininformation unvollständig, vbd besitzt kein src" #: src/xend_internal.c:1644 msgid "cannot parse vbd filename, missing driver name" msgstr "vbd Dateiname kann nicht analysiert werden, fehlender Treibername" #: src/xend_internal.c:1659 msgid "cannot parse vbd filename, missing driver type" msgstr "vbd Dateiname kann nicht analysiert werden, fehlender Treibertyp" #: src/xend_internal.c:1815 #, fuzzy, c-format msgid "malformed mac address '%s'" msgstr "MAC-Adressen-Feld" #: src/xend_internal.c:1896 #, fuzzy, c-format msgid "unexpected sound model %s" msgstr "Audio-Modell einfügen" #: src/xend_internal.c:2097 #, fuzzy, c-format msgid "unknown graphics type '%s'" msgstr "Unbekannter Gerät-Typ '%s'" #: src/xend_internal.c:2224 #, fuzzy msgid "missing PCI domain" msgstr "Fehler beim Speichern der Domain: %s" #: src/xend_internal.c:2229 #, fuzzy msgid "missing PCI bus" msgstr "Max. # an fehlenden Worten:" #: src/xend_internal.c:2234 #, fuzzy msgid "missing PCI slot" msgstr "Max. # an fehlenden Worten:" #: src/xend_internal.c:2239 #, fuzzy msgid "missing PCI func" msgstr "Max. # an fehlenden Worten:" #: src/xend_internal.c:2245 #, fuzzy, c-format msgid "cannot parse PCI domain '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/xend_internal.c:2250 #, fuzzy, c-format msgid "cannot parse PCI bus '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/xend_internal.c:2255 #, fuzzy, c-format msgid "cannot parse PCI slot '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/xend_internal.c:2260 #, fuzzy, c-format msgid "cannot parse PCI func '%s'" msgstr "Kann die Plural-Formen: '%s' nicht lesen" #: src/xend_internal.c:2326 msgid "domain information incomplete, missing id" msgstr "Domaininformation unvollständig, fehlende id" #: src/xend_internal.c:2394 #, fuzzy, c-format msgid "invalid CPU mask %s" msgstr "GIF: Ungültiger Index." #: src/xend_internal.c:2405 src/xend_internal.c:2415 src/xend_internal.c:2425 #, fuzzy, c-format msgid "unknown lifecycle type %s" msgstr "Unbekannter Gerät-Typ '%s'" #: src/xend_internal.c:2807 msgid "topology syntax error" msgstr "Topologie-Syntaxfehler" #: src/xend_internal.c:2871 msgid "failed to parse Xend domain information" msgstr "Analyse der Xend-Domaininformation schlug fehl" #: src/xend_internal.c:2995 src/xend_internal.c:3022 src/xend_internal.c:3050 #: src/xend_internal.c:3079 src/xend_internal.c:3110 src/xend_internal.c:3185 #: src/xend_internal.c:3222 #, fuzzy, c-format msgid "Domain %s isn't running." msgstr "Gast läuft nicht" #: src/xend_internal.c:3380 msgid "xenDaemonDomainFetch failed to find this domain" msgstr "" #: src/xend_internal.c:4126 src/xend_internal.c:4133 #, fuzzy msgid "unsupported device type" msgstr "Gerättypen-Feld" #: src/xend_internal.c:4238 msgid "xenDaemonGetAutostart failed to find this domain" msgstr "" #: src/xend_internal.c:4279 msgid "xenDaemonSetAutostart failed to find this domain" msgstr "" #: src/xend_internal.c:4287 #, fuzzy msgid "unexpected value from on_xend_start" msgstr "Unerwarteter Werte-Knoten" #: src/xend_internal.c:4298 msgid "no memory" msgstr "Kein Sspeicher" #: src/xend_internal.c:4304 msgid "sexpr2string failed" msgstr "sexpr2string fehlgeschlagen" #: src/xend_internal.c:4309 msgid "Failed to redefine sexpr" msgstr "Neudefinieren von sexpr fehlgeschlagen" #: src/xend_internal.c:4314 msgid "on_xend_start not present in sexpr" msgstr "" #: src/xend_internal.c:4345 #, fuzzy, c-format msgid "unable to resolve name %s" msgstr "Kann GTK nicht initialisieren: " #: src/xend_internal.c:4381 msgid "" "xenDaemonDomainMigrate: Xen does not support renaming domains during " "migration" msgstr "" #: src/xend_internal.c:4391 msgid "" "xenDaemonDomainMigrate: Xen does not support bandwidth limits during " "migration" msgstr "" #: src/xend_internal.c:4403 #, fuzzy msgid "xenDaemonDomainMigrate: unsupported flag" msgstr "Unbekanntes Flag für den Stil " #: src/xend_internal.c:4416 #, fuzzy msgid "xenDaemonDomainMigrate: invalid URI" msgstr "" "Libvirt-URI ist: %s\n" "\n" #: src/xend_internal.c:4421 msgid "xenDaemonDomainMigrate: only xenmigr:// migrations are supported by Xen" msgstr "" #: src/xend_internal.c:4428 msgid "xenDaemonDomainMigrate: a hostname must be specified in the URI" msgstr "" #: src/xend_internal.c:4448 #, fuzzy msgid "xenDaemonDomainMigrate: invalid port number" msgstr "Parsen der Port-Nummer fehlgeschlagen: %s\n" #: src/xend_internal.c:4504 #, fuzzy msgid "failed to parse domain description" msgstr "Erzeugen eines Domänenbrowser fehlgeschlagen: %s" #: src/xend_internal.c:4510 #, fuzzy msgid "failed to build sexpr" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/xend_internal.c:4520 #, c-format msgid "Failed to create inactive domain %s\n" msgstr "Fehler beim Erstellen einer inaktiven Domain %s\n" #: src/xend_internal.c:4688 src/xend_internal.c:4764 src/xend_internal.c:4854 msgid "unsupported in xendConfigVersion < 4" msgstr "Nicht unterstütz in xendConfigVersion < 4" #: src/xend_internal.c:4700 #, fuzzy msgid "node information incomplete, missing scheduler name" msgstr "Domaininformation unvollständig, fehlender Name" #: src/xend_internal.c:4706 src/xend_internal.c:4713 msgid "strdup failed" msgstr "strdup fehlgeschlagen" #: src/xend_internal.c:4718 src/xend_internal.c:4812 src/xend_internal.c:4924 #, fuzzy msgid "Unknown scheduler" msgstr ": unbekannter Zeichensatz" #: src/xend_internal.c:4777 src/xend_internal.c:4867 #, fuzzy msgid "Failed to get a scheduler name" msgstr "Konnte ISP Namen '%s' nicht ermitteln" #: src/xend_internal.c:4790 src/xend_internal.c:4903 #, fuzzy msgid "domain information incomplete, missing cpu_weight" msgstr "Domaininformation unvollständig, fehlende uuid" #: src/xend_internal.c:4795 src/xend_internal.c:4912 #, fuzzy msgid "domain information incomplete, missing cpu_cap" msgstr "Domaininformation unvollständig, fehlender Name" #: src/xend_internal.c:4970 #, fuzzy msgid "domainBlockPeek is not supported for dom0" msgstr "Auflisten von Ereignissen für diese Zelle ist nicht unterstützt." #: src/xend_internal.c:4991 #, c-format msgid "%s: invalid path" msgstr "%s: Ungültiger Pfad" #: src/xend_internal.c:4999 #, fuzzy, c-format msgid "failed to open for reading: %s" msgstr "CHM-Archiv '%s' lässt sich nicht öffnen." #: src/xend_internal.c:5011 #, fuzzy, c-format msgid "failed to lseek or read from file: %s" msgstr "Konnte keine PID von Sperr-Datei lesen." #: src/xend_internal.c:5093 src/xend_internal.c:5139 #, fuzzy, c-format msgid "unexpected graphics type %d" msgstr "Gerättypen-Feld" #: src/xend_internal.c:5182 #, fuzzy msgid "unexpected chr device type" msgstr "Unerwarteter MIME-Type" #: src/xend_internal.c:5260 #, c-format msgid "Cannot directly attach floppy %s" msgstr "" #: src/xend_internal.c:5272 #, c-format msgid "Cannot directly attach CDROM %s" msgstr "" #: src/xend_internal.c:5372 src/xm_internal.c:2025 #, fuzzy, c-format msgid "unsupported network type %d" msgstr "Nicht unterstützter Netzwerk-Typ" #: src/xend_internal.c:5413 src/xm_internal.c:2013 #, fuzzy, c-format msgid "network %s is not active" msgstr "'%s' ist keine gültige POT-Datei." #: src/xend_internal.c:5472 src/xend_internal.c:5520 msgid "managed PCI devices not supported with XenD" msgstr "" #: src/xend_internal.c:5627 src/xend_internal.c:5634 src/xend_internal.c:5641 #, fuzzy, c-format msgid "unexpected lifecycle value %d" msgstr "Kann Wert von '%s' nicht lesen" #: src/xend_internal.c:5662 msgid "no HVM domain loader" msgstr "Kein HVM-Domain-Loader" #: src/xend_internal.c:5899 #, fuzzy msgid "hotplug of device type not supported" msgstr "ai_socktype nicht unterstützt" #: src/xm_internal.c:161 src/xm_internal.c:192 src/xm_internal.c:197 #: src/xm_internal.c:220 #, fuzzy, c-format msgid "config value %s was malformed" msgstr "Ungültiges tsflag in Konfigurationsdatei: %s" #: src/xm_internal.c:242 src/xm_internal.c:255 #, fuzzy, c-format msgid "config value %s was missing" msgstr "UUID-Konfig-Parameter fehlt" #: src/xm_internal.c:248 #, c-format msgid "config value %s was not a string" msgstr "" #: src/xm_internal.c:405 #, fuzzy, c-format msgid "cannot stat: %s" msgstr "Programm kann nicht ausgeführt werden:" #: src/xm_internal.c:463 msgid "xenXMConfigCacheRefresh: virHashAddEntry" msgstr "xenXMConfigCacheRefresh: virHashAddEntry" #: src/xm_internal.c:502 #, fuzzy msgid "cannot get time of day" msgstr "Kann den offiziellen Hostnamen nicht bekommen" #: src/xm_internal.c:515 #, fuzzy, c-format msgid "cannot read directory %s" msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #: src/xm_internal.c:799 #, fuzzy, c-format msgid "unexpected value %s for on_poweroff" msgstr "Unerwarteter Werte-Knoten" #: src/xm_internal.c:807 #, fuzzy, c-format msgid "unexpected value %s for on_reboot" msgstr "Unerwarteter Werte-Knoten" #: src/xm_internal.c:815 #, fuzzy, c-format msgid "unexpected value %s for on_crash" msgstr "Unerwarteter Werte-Knoten" #: src/xm_internal.c:1652 msgid "read only connection" msgstr "Schreibgeschützte Verbindung" #: src/xm_internal.c:1657 msgid "not inactive domain" msgstr "Keine inaktive Domain" #: src/xm_internal.c:1665 msgid "virHashLookup" msgstr "virHashLookup" #: src/xm_internal.c:1670 #, fuzzy msgid "can't retrieve config file for domain" msgstr "kann Konfigurationsdatei nicht erstelllen %s: %s" #: src/xm_internal.c:2274 src/xm_internal.c:2283 src/xm_internal.c:2292 #, fuzzy, c-format msgid "unexpected lifecycle action %d" msgstr "Unerwarteter Fehlerist aufgetreten" #: src/xm_internal.c:2571 msgid "can't retrieve config filename for domain to overwrite" msgstr "" #: src/xm_internal.c:2577 msgid "can't retrieve config entry for domain to overwrite" msgstr "" #: src/xm_internal.c:2588 src/xm_internal.c:2595 #, fuzzy msgid "failed to remove old domain from config map" msgstr "Wiederherstellen der Domain aus %s gescheitert" #: src/xm_internal.c:2604 msgid "config file name is too long" msgstr "KOnfigurations-Dateinamen ist zu lange" #: src/xm_internal.c:2622 #, fuzzy msgid "unable to get current time" msgstr "Versuch, örtliche Systemzeit zu bekommen, gescheitert." #: src/xm_internal.c:2631 src/xm_internal.c:2638 #, fuzzy msgid "unable to store config file handle" msgstr "Konfigurationsdatei %s konnte nicht gelesen werden" #: src/xm_internal.c:2856 src/xm_internal.c:2959 msgid "unknown device" msgstr "Unbekanntes Gerät" #: src/xm_internal.c:3017 #, c-format msgid "cannot check link %s points to config %s" msgstr "" #: src/xm_internal.c:3046 #, fuzzy, c-format msgid "failed to create link %s to %s" msgstr "Cursor konnte nicht erzeugt werden" #: src/xm_internal.c:3054 #, fuzzy, c-format msgid "failed to remove link %s" msgstr "Konnte Sperr-Datei '%s' nicht löschen." #: src/xml.c:60 msgid "Invalid parameter to virXPathString()" msgstr "Ungültiger Parameter für für PrintDlgEx" #: src/xml.c:101 #, c-format msgid "'%s' value longer than %Zd bytes in virXPathStringLimit()" msgstr "" #: src/xml.c:131 msgid "Invalid parameter to virXPathNumber()" msgstr "Ungültiger Parameter für für PrintDlgEx" #: src/xml.c:162 #, fuzzy msgid "Invalid parameter to virXPathLong()" msgstr "Ungültiger Parameter für für PrintDlgEx" #: src/xml.c:249 src/xml.c:347 #, fuzzy msgid "Invalid parameter to virXPathULong()" msgstr "Ungültiger Parameter für für PrintDlgEx" #: src/xml.c:405 msgid "Invalid parameter to virXPathBoolean()" msgstr "Ungültiger Parameter für virXPathBoolean()" #: src/xml.c:443 msgid "Invalid parameter to virXPathNode()" msgstr "Ungültiger Parameter für PrintDlgEx" #: src/xml.c:485 msgid "Invalid parameter to virXPathNodeSet()" msgstr "Ungültiger Parameter für virXPathNodeSet()" #: src/xs_internal.c:300 msgid "failed to connect to Xen Store" msgstr "Verbindung zum Xen-Store scheiterte" #: src/xs_internal.c:309 #, fuzzy msgid "failed to allocate activeDomainList" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/xs_internal.c:318 #, fuzzy msgid "failed to allocate xsWatchList" msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #: src/xs_internal.c:327 #, fuzzy msgid "adding watch @releaseDomain" msgstr "Neue .po-Datei hinzufügen" #: src/xs_internal.c:336 #, fuzzy msgid "adding watch @introduceDomain" msgstr "Neue .po-Datei hinzufügen" #: src/xs_internal.c:1118 #, fuzzy msgid "watch already tracked" msgstr "Wähle bereits ISP." #: src/xs_internal.c:1134 #, fuzzy msgid "reallocating list" msgstr "Dateiliste" #, fuzzy #~ msgid "Connection failed." #~ msgstr "Operation schlug fehl" #, fuzzy #~ msgid "Authentication failed: %s" #~ msgstr "Authentifikation gescheitert: %s" #, fuzzy #~ msgid "Unable to open a SSH channel." #~ msgstr "Konnte '%s' nicht für %s öffnen." #, fuzzy #~ msgid "Unable to execute remote command." #~ msgstr "Erzeugen eines Domänenbrowser fehlgeschlagen: %s" #, fuzzy #~ msgid "Unable to send EOF." #~ msgstr "Konnte '%s' nicht für %s öffnen." #, fuzzy #~ msgid "cannot initialize bridge support: %s" #~ msgstr "Kann SciTech MGL nicht initialisieren !" #~ msgid "Address family for hostname not supported" #~ msgstr "Adress-Familie für Hostnamen nicht unterstützt" #~ msgid "Temporary failure in name resolution" #~ msgstr "Temporärer Fehler in der Namensauflösung" #~ msgid "Bad value for ai_flags" #~ msgstr "Fehlerhafter Wert für ai_flags" #~ msgid "Non-recoverable failure in name resolution" #~ msgstr "Nicht aufdeckbarer Fehler in der Namesauflösung" #~ msgid "ai_family not supported" #~ msgstr "ai_family nicht unterstützt" #~ msgid "Memory allocation failure" #~ msgstr "Speicherzuordnung fehlgeschlagen" #~ msgid "No address associated with hostname" #~ msgstr "Keine Adresse mit Hostname verknüpft" #~ msgid "Name or service not known" #~ msgstr "Name oder Dienst ist unbekannt" #~ msgid "Servname not supported for ai_socktype" #~ msgstr "Servername nicht unterstützt für ai_socktype" #~ msgid "ai_socktype not supported" #~ msgstr "ai_socktype nicht unterstützt" #~ msgid "System error" #~ msgstr "Systemfehler" #~ msgid "Argument buffer too small" #~ msgstr "Argument-Buffer zu klein" #, fuzzy #~ msgid "Processing request in progress" #~ msgstr "Dateiübertragungen dauern noch an." #~ msgid "Request canceled" #~ msgstr "Anforderung abgebrochen" #~ msgid "Request not canceled" #~ msgstr "Anforderung nicht abgebrochen" #~ msgid "All requests done" #~ msgstr "Alle Anforderungen erledigt" #~ msgid "Interrupted by a signal" #~ msgstr "Unterbruch durch Signal" #~ msgid "Parameter string not correctly encoded" #~ msgstr "Parameter-String nicht korrekt codiert" #~ msgid "Unknown error" #~ msgstr "Unbekannter Fehler" #, fuzzy #~ msgid "unable to get security label" #~ msgstr "Die letzte Zeit konnte nicht abgefragt werden" #, fuzzy #~ msgid "unable to get security model" #~ msgstr "Die letzte Zeit konnte nicht abgefragt werden" #, fuzzy #~ msgid "Failed to set lxc resources" #~ msgstr "Konnte Dateien nicht in die Zwischenablage kopieren." #~ msgid "QEMU driver only supports virtual memory addrs" #~ msgstr "QEMU-Treiber unterstützt nur virtuelle Speicher-Adressen" #, fuzzy #~ msgid "no storage pool with matching name" #~ msgstr "Kein Pool mit übereinstimmenden Namen" #, fuzzy #~ msgid "Error getting param" #~ msgstr "Fehler beim Öffnen der Datei %s!" #, fuzzy #~ msgid "failed to drop %s" #~ msgstr "NAT für das physikalische Gerät %s" #, fuzzy #~ msgid "Failed to open WWPN path '%s' for reading" #~ msgstr "Öffnen von %s zu Lesezwecken schlug fehl" #, fuzzy #~ msgid "Failed to set close-on-exec file descriptor flag\n" #~ msgstr "Setzen des close-on-exec-Dateibeschreiber-Flag fehlgeschlagen" #, fuzzy #~ msgid "Failed to read domain status for %s\n" #~ msgstr "Fehler beim Erstellen der Domain von %s" #~ msgid "unknown root element" #~ msgstr "Unbekanntes root-Element" #~ msgid "host" #~ msgstr "Host" #~ msgid "node" #~ msgstr "Knoten" #~ msgid "could not connect to hypervisor" #~ msgstr "Verbindung mit Hypervisor fehlgeschlagen" #~ msgid "could not connect to %s" #~ msgstr "Verbindung mit %s fehlgeschlagen" #, fuzzy #~ msgid "Failed to autostart network '%s': %s\n" #~ msgstr "Zum physikalischen Netzwerk weiterleiten" #, fuzzy #~ msgid "networkStartup: out of memory\n" #~ msgstr "Übersetzungsspeicher aktualisieren" #~ msgid "failed to start VM" #~ msgstr "Start VM fehlgeschlagen" #, fuzzy #~ msgid "failed to start listening VM" #~ msgstr "Start VM fehlgeschlagen" #, fuzzy #~ msgid "failed to wait on process: %d: %s\n" #~ msgstr "Umleitung des Ein/Ausgabe des Unterprozesses gescheitert" #, fuzzy #~ msgid "failed to chdir into /new on tmpfs" #~ msgstr "Speichern des Inhalts scheiterte" #, fuzzy #~ msgid "failed to lazily unmount old root" #~ msgstr "Fehlerhafte %s DFÜ-Verbindung: %s" #, fuzzy #~ msgid "cannot create /dev/" #~ msgstr "Datenbankverzeichnis kann nicht erstellt werden!" #, fuzzy #~ msgid "failed to mount /dev tmpfs" #~ msgstr "Speichern des Inhalts scheiterte" #, fuzzy #~ msgid "Unable to log VM console data: %s\n" #~ msgstr "Konnte Zwischenablage nicht schließen." #~ msgid "Received signal %d, dispatching to drivers" #~ msgstr "Erhielt Signal %d, weiterleiten an Treiber" #~ msgid "xdr_remote_message_header" #~ msgstr "xdr_remote_message_header" #~ msgid "dummy length" #~ msgstr "Dummy-Länge" #, fuzzy #~ msgid "serialise reply header" #~ msgstr "Spaltenkopf einer Tabelle" #, fuzzy #~ msgid "serialise return struct" #~ msgstr "Eingabe" #, fuzzy #~ msgid "serialise return error" #~ msgstr "Fehler beim Exportieren der Einstellungen" #~ msgid "xdr_setpos" #~ msgstr "xdr_setpos" #, fuzzy #~ msgid "serialise return length" #~ msgstr "Content-Length ungültig" #~ msgid "storage_pool not found" #~ msgstr "storage_pool nicht gefunden" #~ msgid "storage_vol not found" #~ msgstr "storage_vol nicht gefunden" #~ msgid "allocate buffer" #~ msgstr "Puffer zuweisen" #~ msgid "allocating connection" #~ msgstr "Verbindung zuweisen" #~ msgid "allocating network" #~ msgstr "Netzwerk zuweisen" #, fuzzy #~ msgid "allocating storage pool" #~ msgstr "Fehler beim Reservieren des Speichers.\n" #, fuzzy #~ msgid "allocating storage vol" #~ msgstr "Fehler beim Reservieren des Speichers.\n" #~ msgid "Failed to run '" #~ msgstr "Laufen fehlgeschlagen '" #, fuzzy #~ msgid "allocating conn->name" #~ msgstr "Filtername schon vorhanden" #~ msgid "missing filesystem type" #~ msgstr "Fehlender Dateisystem-Typ" #~ msgid "empty or invalid mount source" #~ msgstr "Leere oder ungültige Einhängequelle" #~ msgid "missing mount target" #~ msgstr "Fehlendes Einhänge-Ziel" #~ msgid "empty or invalid mount target" #~ msgstr "Leeres oder ungültige Einhängeziel" #~ msgid "failed to generate uuid" #~ msgstr "UUID generieren fehlgeschlagen" #~ msgid "invalid uuid element" #~ msgstr "Ungültiges UUID-Element" #~ msgid "invalid or missing init element" #~ msgstr "Ungültiges oder fehlendes init-Element" #~ msgid "init string too long" #~ msgstr "init-String zu lang" #~ msgid "invalid memory value" #~ msgstr "Ungültiger Speicher-Wert" #~ msgid "invalid root element" #~ msgstr "Ungültiges root-Element" #~ msgid "invalid domain id" #~ msgstr "Ungültige Domain-ID" #, fuzzy #~ msgid "error checking container process: %d %s" #~ msgstr "Fehler beim Initialisieren der Rechtschreibprüfung: %s" #, fuzzy #~ msgid "failed to open config directory %s: %s" #~ msgstr "Verzeichnisinhalt konnte nicht empfangen werden" #, fuzzy #~ msgid "cannot create lxc state directory %s: %s" #~ msgstr "Kann Datenbankverzeichnis nicht erstellen!" #, fuzzy #~ msgid "cannot create tty pid file %s: %s" #~ msgstr "kann Konfigurationsdatei nicht erstelllen %s: %s" #, fuzzy #~ msgid "cannot fdopen tty pid file %s: %s" #~ msgstr "Öffnen der PID-Datei (fdopen) fehlgeschlagen '%s' : %s" #, fuzzy #~ msgid "failed to close tty pid file %s: %s" #~ msgstr "Konnte keine PID von Sperr-Datei lesen." #, fuzzy #~ msgid "cannot write tty pid file %s: %s" #~ msgstr "kann Konfigurationsdatei nicht schreiben %s: %s" #, fuzzy #~ msgid "cannot open tty pid file %s: %s" #~ msgstr "getpass kann /dev/tty nicht öffnen\n" #, fuzzy #~ msgid "cannot remove ttyPidFile %s: %s" #~ msgstr "Kann %s Datei nicht entfernt %s" #, fuzzy #~ msgid "execl failed to exec init: %s" #~ msgstr "Die Befehlszeile »%s« konnte nicht mit der URI »%s« verknüpft werden." #~ msgid "clone() failed, %s" #~ msgstr "clone() fehlgeschlagen, %s" #, fuzzy #~ msgid "unable to get storage for vm tty name" #~ msgstr "" #~ "Derzeitige Speichergrösse (MemorySize) konnte nicht überprüft werden" #~ msgid "posix_openpt failed: %s" #~ msgstr "posix_openpt fehlgeschlagen: %s" #~ msgid "unlockpt failed: %s" #~ msgstr "unlockpt fehlgeschlagen: %s" #~ msgid "ptsname_r failed: %s" #~ msgstr "ptsname_r fehlgeschlagen: %s" #~ msgid "epoll_ctl(fd2) failed: %s" #~ msgstr "epoll_ctl(fd2) fehlgeschlagen: %s" #, fuzzy #~ msgid "unable to fork tty forwarding process: %s" #~ msgstr "" #~ "Attribute der Datei »%s« konnten nicht ermittelt werden: fstat() " #~ "fehlgeschlagen: %s" #, fuzzy #~ msgid "sending SIGTERM failed: %s" #~ msgstr "Verbindungsversuch fehlgeschlagen" #, fuzzy #~ msgid "waitpid failed to wait for tty %d: %d %s" #~ msgstr "»%s« konnte nicht zum Schreiben geöffnet werden: %s" #, fuzzy #~ msgid "sending SIGKILL failed: %s" #~ msgstr "Verbindungsversuch fehlgeschlagen" #~ msgid "invalid domain name" #~ msgstr "Ungültiger Domain-Namen" #~ msgid "No IP address in the given xml config file '%s'" #~ msgstr "Keine IP-Adresse in der gegebenen XML-Konfig-Datei '%s'" #~ msgid "ipaddress length too long" #~ msgstr "IP-Adressen-Länge zu lang" #, fuzzy #~ msgid "Failed to Create Memory for 'ovz_ip' structure" #~ msgstr "Speicherzuweisung gescheitert" #~ msgid "No Netmask address in the given xml config file '%s'" #~ msgstr "Keine Netzmasken-Adresse in der gegebenen XML-Konfig-Datei '%s'" #~ msgid "netmask length too long" #~ msgstr "Netzmasken-Länge zu lang" #~ msgid "No hostname in the given xml config file '%s'" #~ msgstr "Kein Hostnamen in der gegebenen XML-Konfig-Datei '%s'" #~ msgid "hostname length too long" #~ msgstr "Hostnamen-Länge zu lang" #~ msgid "No Gateway address in the given xml config file '%s'" #~ msgstr "Keine Gateway-Adresse in der gegebenen XML-Konfig-Datei '%s'" #~ msgid "gateway length too long" #~ msgstr "Gateway-Länge zu lang" #~ msgid "No Nameserver address inthe given xml config file '%s'" #~ msgstr "Keine Nameserver-Adresse in der gegebenen XML-Konfig-Datei '%s'" #~ msgid "nameserver length too long" #~ msgstr "Nameserver-Länge zu lang" #, fuzzy #~ msgid "Failed to Create Memory for 'ovz_ns' structure" #~ msgstr "Speicherzuweisung gescheitert" #~ msgid "profile length too long" #~ msgstr "Profil-Länge zu lang" #~ msgid "Error creating OPENVZ VM" #~ msgstr "Fehler beim Erzeugen von OPENVZ VM" #, fuzzy #~ msgid "failed to allocate vncTLSx509certdir" #~ msgstr "Bildpuffer von %u Byte konnte nicht bereitgestellt werden" #~ msgid "Invalid cdrom device name: %s" #~ msgstr "Ungültiges CDROM-Gerätname: %s" #~ msgid "Network name '%s' too long" #~ msgstr "Netzwerkname '%s' zu lang" #~ msgid "TAP interface name '%s' is too long" #~ msgstr "TAP-Schnittstellenname '%s' ist zu lang" #~ msgid "TAP script path '%s' is too long" #~ msgstr "TAP-Script-Pfad '%s' ist zu lang" #~ msgid "TAP bridge path '%s' is too long" #~ msgstr "TAP-Brücken-Pfad '%s' ist zu lang" #~ msgid "IP address '%s' is too long" #~ msgstr "IP-Adresse '%s' ist zu lang" #~ msgid "Model name '%s' is too long" #~ msgstr "Modelname '%s' ist zu lang" #, fuzzy #~ msgid "failed to allocate space for xmlXPathContext" #~ msgstr "Knotenzuweisung schlug fehl" #~ msgid "domain name length too long" #~ msgstr "Domain-Name-Länge zu lang" #~ msgid "Failed to generate UUID: %s" #~ msgstr "UUID generieren fehlgeschlagen: %s" #, fuzzy #~ msgid "malformed memory information" #~ msgstr "&Wiederverbindungsinformationen" #, fuzzy #~ msgid "malformed vcpu information" #~ msgstr "&Wiederverbindungsinformationen" #, fuzzy #~ msgid "malformed vcpu mask information" #~ msgstr "Domain vcpu-Information" #~ msgid "architecture type too long" #~ msgstr "Architektur-Typ zu lang" #~ msgid "machine type too long" #~ msgstr "Maschinen-Typ zu lang" #~ msgid "initrd path too long" #~ msgstr "initrd-Pfad zu lang" #~ msgid "cmdline arguments too long" #~ msgstr "Kommandozeilen-Argumente zu lang" #~ msgid "unsupported guest type" #~ msgstr "Nicht unterstützer Gast-Typ" #~ msgid "Unsupported graphics type %s" #~ msgstr "Nicht unterstützter Grafik-Typ %s" #, fuzzy #~ msgid "failed to allocate space for disk string" #~ msgstr "Knotenzuweisung schlug fehl" #, fuzzy #~ msgid "failed to allocate space for net string" #~ msgstr "Knotenzuweisung schlug fehl" #, fuzzy #~ msgid "failed to allocate space for input string" #~ msgstr "Speicherzuweisung gescheitert" #, fuzzy #~ msgid "failed to allocate space for sound dev" #~ msgstr "Knotenzuweisung schlug fehl" #, fuzzy #~ msgid "failed to allocate space for tapfds string" #~ msgstr "Knotenzuweisung schlug fehl" #, fuzzy #~ msgid "failed to allocate space for argv string" #~ msgstr "Speicherzuweisung gescheitert" #, fuzzy #~ msgid "failed to allocate space for vm string" #~ msgstr "Knotenzuweisung schlug fehl" #, fuzzy #~ msgid "failed to allocate space for range string" #~ msgstr "Speicherzuweisung gescheitert" #, fuzzy #~ msgid "failed to allocate space for network_def string" #~ msgstr "Knotenzuweisung schlug fehl" #, fuzzy #~ msgid "failed to allocate space for xmlXPathContext string" #~ msgstr "Speicherzuweisung gescheitert" #, fuzzy #~ msgid "network name length too long" #~ msgstr "Dateinamen-Länge %zu ist zu lange" #, fuzzy #~ msgid "forward device name '%s' is too long" #~ msgstr "Die Nummer in Position %s ist zu lang" #, fuzzy #~ msgid "failed to allocate space for network string" #~ msgstr "Knotenzuweisung schlug fehl" #, fuzzy #~ msgid "Failed to load network config '%s': out of memory" #~ msgstr "Hinzufügen des Netzwerks zur Verbindungs-Hashtabelle schlug fehl" #, fuzzy #~ msgid "Config filename '%s/%s' is too long" #~ msgstr "Die Nummer in Position %s ist zu lang" #, fuzzy #~ msgid "allocating cpu mask" #~ msgstr "Hintergrund-Schraffurmaske" #~ msgid "failed to generate XML: out of memory" #~ msgstr "XML generieren fehlgeschlagen: Kein Speicher mehr" #~ msgid "out of memory in asprintf" #~ msgstr "Kein Speicher mehr iin asprintf" #~ msgid "" #~ "QEMU quit during %s startup\n" #~ "%s" #~ msgstr "" #~ "QEMU beendet während %s Start\n" #~ "%s" #, fuzzy #~ msgid "allocate cpumap" #~ msgstr "Farbtabelleneinträge konnten nicht bereitgestellt werden" #~ msgid "config file path too long: %s/%s.log" #~ msgstr "Konfigurationsdatei-Pfad ist zu lang: %s/%s.log" #, fuzzy #~ msgid "failed to allocate space for dnsmasq argv" #~ msgstr "Knotenzuweisung schlug fehl" #, fuzzy #~ msgid "failed to allocate space for IP tables support" #~ msgstr "Knotenzuweisung schlug fehl" #, fuzzy #~ msgid "failed to set bridge forward delay to %d" #~ msgstr "Abruf der Knoteninformationen scheiterte" #, fuzzy #~ msgid "Failed to bring down bridge '%s' : %s" #~ msgstr "Öffnen von '%s' schlug fehl: %s" #, fuzzy #~ msgid "Got unexpected pid for dnsmasq" #~ msgstr "Unerwarteter Dict-Knoten" #, fuzzy #~ msgid "failed to allocate space for capabilities support" #~ msgstr "Speicherzuweisung gescheitert" #, fuzzy #~ msgid "failed to allocate space for VM name string" #~ msgstr "Speicherzuweisung gescheitert" #, fuzzy #~ msgid "Failed to delete autostart link '%s': %s" #~ msgstr "Die symbolische Verknüpfung »%s« konnte nicht gelesen werden: %s" #~ msgid "CDROM not attached, cannot change media" #~ msgstr "CDROM nicht angehängt, kann Medium nicht wechseln" #, fuzzy #~ msgid "failed to allocate space for network bridge string" #~ msgstr "Knotenzuweisung schlug fehl" #, fuzzy #~ msgid "allocating priv->hostname" #~ msgstr "Bekomme den Hostnamen nicht" #~ msgid "uri params" #~ msgstr "URI-Parameter" #, fuzzy #~ msgid "struct private_data" #~ msgstr "&Persönliche Daten löschen..." #, fuzzy #~ msgid "socket closed unexpectedly" #~ msgstr "Socket für eingehende Verbindungen geschlossen" #~ msgid "failed to copy a string" #~ msgstr "Stringkopie schlug fehl" #, fuzzy #~ msgid "unknown storage backend type %s" #~ msgstr "Typ des RAS-Bilds unbekannt" #~ msgid "context" #~ msgstr "Kontext" #~ msgid "path" #~ msgstr "Pfad" #~ msgid "regex" #~ msgstr "regex" #~ msgid "regex groups" #~ msgstr "regex-Gruppen" #~ msgid "n_columns too large" #~ msgstr "n_columns zu gross" #~ msgid "volume" #~ msgstr "Datenträger" #, fuzzy #~ msgid "volume extents" #~ msgstr "Leiser" #~ msgid "source" #~ msgstr "Quelle" #, fuzzy #~ msgid "volume key" #~ msgstr "Schlüssel entfe&rnen" #~ msgid "target" #~ msgstr "Ziel" #, fuzzy #~ msgid "storage vol key" #~ msgstr "Fingerabdruck des Server-Schlüssels:" #~ msgid "session" #~ msgstr "Session" #~ msgid "name" #~ msgstr "Name" #~ msgid "devpath" #~ msgstr "devpath" #~ msgid "key" #~ msgstr "Taste" #, fuzzy #~ msgid "Failed to parse target from sysfs path %s/%s" #~ msgstr "Datei »%s« konnte nicht geöffnet werden: %s" #, fuzzy #~ msgid "portal" #~ msgstr "Gesamt" #~ msgid "command line" #~ msgstr "Befehlszeile" #, fuzzy #~ msgid "cannot allocate storage pool" #~ msgstr "Farbtabelleneinträge konnten nicht bereitgestellt werden" #, fuzzy #~ msgid "malformed xml document" #~ msgstr "Eine Rechtschreibprüfung am Dokument durchführen" #~ msgid "xmlXPathContext" #~ msgstr "xmlXPathContext" #~ msgid "xml" #~ msgstr "xml" #~ msgid "missing owner element" #~ msgstr "Fehlendes Besitzer-Element" #, fuzzy #~ msgid "cannot allocate storage vol" #~ msgstr "Farbtabelleneinträge konnten nicht bereitgestellt werden" #~ msgid "pool" #~ msgstr "Pool" #~ msgid "configFile" #~ msgstr "configFile" #~ msgid "config file" #~ msgstr "Konfigurationsdatei" #~ msgid "names" #~ msgstr "Namen" #~ msgid "domain" #~ msgstr "Domain" #~ msgid "domain memory" #~ msgstr "Domain-Speicher" #~ msgid "domain current memory" #~ msgstr "Aktueller Domain-Speicher" #~ msgid "domain vcpus" #~ msgstr "Domain-vcpus" #~ msgid "domain reboot behaviour" #~ msgstr "Domain-Neustartverhalten" #~ msgid "domain poweroff behaviour" #~ msgstr "Domain-Abschaltverhalten" #~ msgid "domain crash behaviour" #~ msgstr "Domain-Absturzverhalten" #~ msgid "load domain definition file" #~ msgstr "Domain-Definitionsdatei laden" #~ msgid "network" #~ msgstr "Netzwerk" #~ msgid "network forward" #~ msgstr "Netzwerkweiterleitung" #~ msgid "ip address" #~ msgstr "IP-Adresse" #~ msgid "ip netmask" #~ msgstr "IP-Netzmaske" #~ msgid "load network definition file" #~ msgstr "Netzwerk-Definitionsdatei laden" #~ msgid "too many domains" #~ msgstr "zu viele Domains" #~ msgid "cannot write header" #~ msgstr "Kann Header nicht schreiben" #~ msgid "cannot save domain core" #~ msgstr "Kann Domain-Core nicht speichern" #~ msgid "too many networks" #~ msgstr "zu viele Netzwerke" #~ msgid "blocked" #~ msgstr "blockiert" #~ msgid "allocating %d domain info" #~ msgstr "%d Domain-Info zuweisen" #, fuzzy #~ msgid "xend_get: error from xen daemon: %s" #~ msgstr "Abspalten des Kindprozesses fehlgeschlagen (%s)" #~ msgid "allocate new buffer" #~ msgstr "Neuen Puffer zuweisen" #, fuzzy #~ msgid "gethostbyname failed: %s" #~ msgstr "Authentifizierung fehlgeschlagen." #, fuzzy #~ msgid "parsing soundhw string failed." #~ msgstr "GPG-Schlüssel-Analyse fehlgeschlagen: " #~ msgid "failed to parse topology information" #~ msgstr "Analyse der Topologie-Informationen gescheitert" #~ msgid "gethostname failed: %s" #~ msgstr "gethostname fehlgeschlagen: %s" #, fuzzy #~ msgid "failed to strdup hostname: %s" #~ msgstr "Sie müssen einen Servernamen angeben." #~ msgid "xenXMConfigCacheRefresh: name" #~ msgstr "xenXMConfigCacheRefresh: name" #, fuzzy #~ msgid "cannot read XML domain definition" #~ msgstr "Domain-Definitionsdatei laden" #, fuzzy #~ msgid "missing top level domain element" #~ msgstr "Neuer Elementknoten" #~ msgid "domain type is invalid" #~ msgstr "Domain-Typ ist ungültig" #, fuzzy #~ msgid "cannot create XPath context" #~ msgstr "Kann neuen Filter nicht erstellen" #~ msgid "config" #~ msgstr "Konfig" #~ msgid "unable to write config file" #~ msgstr "Konfigurationsdatei kann nicht geschrieben werden" #, fuzzy #~ msgid "failed to allocate sound string" #~ msgstr "Erstellung des DDE-Zeichenkette gescheitert" #~ msgid "no model for sound device" #~ msgstr "Kein Modell für Aufio-Gerät" #~ msgid "allocate string array" #~ msgstr "String-Array zuweisen" #~ msgid "too many boot devices" #~ msgstr "zu viele Boot-Geräte" #~ msgid "invalid input device" #~ msgstr "Ungültiges Eingabegerät" #~ msgid "copying node content" #~ msgstr "Knoteninhalt wird kopiert" #~ msgid "allocate value array" #~ msgstr "Werte-Array zuweisen" #~ msgid "allocate dict" #~ msgstr "dict zuordnen" #~ msgid "send request" #~ msgstr "Anfrage senden" #~ msgid "allocate response" #~ msgstr "Zugewiesene Antwort" #~ msgid "read response" #~ msgstr "Antwort lesen" #~ msgid "parse server response failed" #~ msgstr "Analyse der Serverantwort schlug fehl" #~ msgid "allocate new context" #~ msgstr "Neuen Kontext zuweisen" #, fuzzy #~ msgid "out of memory allocating return array" #~ msgstr "Speicherzuweisung ändern" #, fuzzy #~ msgid "Failed to find the sysfs path for %d:%d:%d:%d: %s" #~ msgstr "Netzwerk wurde nicht gefunden: %s" #, fuzzy #~ msgid "Failed to find SCSI device for %d:%d:%d:%d: %s" #~ msgstr "Netzwerk wurde nicht gefunden: %s" #~ msgid "ret.ids.ids_len > maxids" #~ msgstr "ret.ids.ids_len > maxids" #~ msgid "ret.info.info_len > maxinfo" #~ msgstr "ret.info.info_len > maxinfo" #~ msgid "ret.cpumaps.cpumaps_len > maxinfo * maplen" #~ msgstr "ret.cpumaps.cpumaps_len > maxinfo * maplen" #~ msgid "Failed to open '%s': read: %s" #~ msgstr "Öffnen von '%s' schlug fehl: Lese: %s"