<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <body> <h1>Domain capabilities XML format</h1> <ul id="toc"></ul> <h2><a id="Overview">Overview</a></h2> <p>Sometimes, when a new domain is to be created it may come handy to know the capabilities of the hypervisor so the correct combination of devices and drivers is used. For example, when management application is considering the mode for a host device's passthrough there are several options depending not only on host, but on hypervisor in question too. If the hypervisor is qemu then it needs to be more recent to support VFIO, while legacy KVM is achievable just fine with older qemus.</p> <p>The main difference between <a href="/html/libvirt-libvirt-host.html#virConnectGetCapabilities"> <code>virConnectGetCapabilities</code> </a> and the emulator capabilities API is, the former one aims more on the host capabilities (e.g. NUMA topology, security models in effect, etc.) while the latter one specializes on the hypervisor capabilities.</p> <p>While the <a href="formatcaps.html">Driver Capabilities</a> provides the host capabilities (e.g NUMA topology, security models in effect, etc.), the Domain Capabilities provides the hypervisor specific capabilities for Management Applications to query and make decisions regarding what to utilize.</p> <p>The Domain Capabilities can provide information such as the correct combination of devices and drivers that are supported. Knowing which host and hypervisor specific options are available or supported would allow the management application to choose an appropriate mode for a pass-through host device as well as which adapter to utilize.</p> <p>Some XML elements may be entirely omitted from the domaincapabilities XML, depending on what the libvirt driver has filled in. Applications should only act on what is explicitly reported in the domaincapabilities XML. For example, if <disk supported='yes'/> is present, you can safely assume the driver supports <disk> devices. If <disk supported='no'/> is present, you can safely assume the driver does NOT support <disk> devices. If the <disk> block is omitted entirely, the driver is not indicating one way or the other whether it supports <disk> devices, and applications should not interpret the missing block to mean any thing in particular.</p> <h2><a id="elements">Element and attribute overview</a></h2> <p> A new query interface was added to the virConnect API's to retrieve the XML listing of the set of domain capabilities (<span class="since">Since 1.2.7</span>):</p> <pre> <a href="/html/libvirt-libvirt-domain.html#virConnectGetDomainCapabilities">virConnectGetDomainCapabilities</a> </pre> <p>The root element that emulator capability XML document starts with has name <code>domainCapabilities</code>. It contains at least four direct child elements:</p> <pre> <domainCapabilities> <path>/usr/bin/qemu-system-x86_64</path> <domain>kvm</domain> <machine>pc-i440fx-2.1</machine> <arch>x86_64</arch> ... </domainCapabilities> </pre> <dl> <dt><code>path</code></dt> <dd>The full path to the emulator binary.</dd> <dt><code>domain</code></dt> <dd>Describes the <a href="formatdomain.html#elements">virtualization type</a> (or so called domain type).</dd> <dt><code>machine</code></dt> <dd>The domain's <a href="formatdomain.html#elementsOSBIOS">machine type</a>. Since not every hypervisor has a sense of machine types this element might be omitted in such drivers.</dd> <dt><code>arch</code></dt> <dd>The domain's <a href="formatdomain.html#elementsOSBIOS"> architecture</a>.</dd> </dl> <h3><a id="elementsCPUAllocation">CPU Allocation</a></h3> <p>Before any devices capability occurs, there might be info on domain wide capabilities, e.g. virtual CPUs:</p> <pre> <domainCapabilities> ... <vcpu max='255'/> ... </domainCapabilities> </pre> <dl> <dt><code>vcpu</code></dt> <dd>The maximum number of supported virtual CPUs</dd> </dl> <h3><a id="elementsOSBIOS">BIOS bootloader</a></h3> <p>Sometimes users might want to tweak some BIOS knobs or use UEFI. For cases like that, <a href="formatdomain.html#elementsOSBIOS"><code>os</code></a> element exposes what values can be passed to its children.</p> <pre> <domainCapabilities> ... <os supported='yes'> <enum name='firmware'> <value>bios</value> <value>efi</value> </enum> <loader supported='yes'> <value>/usr/share/OVMF/OVMF_CODE.fd</value> <enum name='type'> <value>rom</value> <value>pflash</value> </enum> <enum name='readonly'> <value>yes</value> <value>no</value> </enum> <enum name='secure'> <value>yes</value> <value>no</value> </enum> </loader> </os> ... <domainCapabilities> </pre> <p>The <code>firmware</code> enum corresponds to the <code>firmware</code> attribute of the <code>os</code> element in the domain XML. The presence of this enum means libvirt is capable of the so-called firmware auto-selection feature. And the listed firmware values represent the accepted input in the domain XML. Note that the <code>firmware</code> enum reports only those values for which a firmware "descriptor file" exists on the host. Firmware descriptor file is a small JSON document that describes details about a given BIOS or UEFI binary on the host, e.g. the fimware binary path, its architecture, supported machine types, NVRAM template, etc. This ensures that the reported values won't cause a failure on guest boot. </p> <p>For the <code>loader</code> element, the following can occur:</p> <dl> <dt><code>value</code></dt> <dd>List of known firmware binary paths. Currently this is used only to advertise the known location of OVMF binaries for QEMU. OVMF binaries will only be listed if they actually exist on host.</dd> <dt><code>type</code></dt> <dd>Whether the boot loader is a typical BIOS (<code>rom</code>) or a UEFI firmware (<code>pflash</code>). Each <code>value</code> sub-element under the <code>type</code> enum represents a possible value for the <code>type</code> attribute for the <loader/> element in the domain XML. E.g. the presence of <code>pfalsh</code> under the <code>type</code> enum means that a domain XML can use UEFI firmware via: <loader/> type="pflash" ...>/path/to/the/firmware/binary/</loader>. </dd> <dt><code>readonly</code></dt> <dd>Options for the <code>readonly</code> attribute of the <loader/> element in the domain XML.</dd> <dt><code>secure</code></dt> <dd>Options for the <code>secure</code> attribute of the <loader/> element in the domain XML. Note that the value <code>yes</code> is listed only if libvirt detects a firmware descriptor file that has path to an OVMF binary that supports Secure boot, and lists its architecture and supported machine type.</dd> </dl> <h3><a id="elementsCPU">CPU configuration</a></h3> <p> The <code>cpu</code> element exposes options usable for configuring <a href="formatdomain.html#elementsCPU">guest CPUs</a>. </p> <pre> <domainCapabilities> ... <cpu> <mode name='host-passthrough' supported='yes'> <enum name='hostPassthroughMigratable'> <value>on</value> <value>off</value> </enum> </mode> <mode name='host-model' supported='yes'> <model fallback='allow'>Broadwell</model> <vendor>Intel</vendor> <feature policy='disable' name='aes'/> <feature policy='require' name='vmx'/> </mode> <mode name='custom' supported='yes'> <model usable='no'>Broadwell</model> <model usable='yes'>Broadwell-noTSX</model> <model usable='no'>Haswell</model> ... </mode> </cpu> ... <domainCapabilities> </pre> <p> Each CPU mode understood by libvirt is described with a <code>mode</code> element which tells whether the particular mode is supported and provides (when applicable) more details about it: </p> <dl> <dt><code>host-passthrough</code></dt> <dd> The <code>hostPassthroughMigratable</code> enum shows possible values of the <code>migratable</code> attribute for the <cpu> element with <code>mode='host-passthrough'</code> in the domain XML. </dd> <dt><code>host-model</code></dt> <dd> If <code>host-model</code> is supported by the hypervisor, the <code>mode</code> describes the guest CPU which will be used when starting a domain with <code>host-model</code> CPU. The hypervisor specifics (such as unsupported CPU models or features, machine type, etc.) may be accounted for in this guest CPU specification and thus the CPU can be different from the one shown in host capabilities XML. This is indicated by the <code>fallback</code> attribute of the <code>model</code> sub element: <code>allow</code> means not all specifics were accounted for and thus the CPU a guest will see may be different; <code>forbid</code> indicates that the CPU a guest will see should match this CPU definition. </dd> <dt><code>custom</code></dt> <dd> The <code>mode</code> element contains a list of supported CPU models, each described by a dedicated <code>model</code> element. The <code>usable</code> attribute specifies whether the model can be used directly on the host. When usable='no' the corresponding model cannot be used without disabling some features that the CPU of such model is expected to have. A special value <code>unknown</code> indicates libvirt does not have enough information to provide the usability data. </dd> </dl> <h3><a id="elementsIothreads">I/O Threads</a></h3> <p> The <code>iothread</code> elements indicates whether or not <a href="formatdomain.html#elementsIOThreadsAllocation">I/O threads</a> are supported. </p> <pre> <domainCapabilities> ... <iothread supported='yes'/> ... <domainCapabilities> </pre> <h3><a id="elementsDevices">Devices</a></h3> <p> Another set of XML elements describe the supported devices and their capabilities. All devices occur as children of the main <code>devices</code> element. </p> <pre> <domainCapabilities> ... <devices> <disk supported='yes'> <enum name='diskDevice'> <value>disk</value> <value>cdrom</value> <value>floppy</value> <value>lun</value> </enum> ... </disk> <hostdev supported='no'/> </devices> </domainCapabilities> </pre> <p>Reported capabilities are expressed as an enumerated list of available options for each of the element or attribute. For example, the <disk/> element has an attribute <code>device</code> which can support the values <code>disk</code>, <code>cdrom</code>, <code>floppy</code>, or <code>lun</code>.</p> <h4><a id="elementsDisks">Hard drives, floppy disks, CDROMs</a></h4> <p>Disk capabilities are exposed under the <code>disk</code> element. For instance:</p> <pre> <domainCapabilities> ... <devices> <disk supported='yes'> <enum name='diskDevice'> <value>disk</value> <value>cdrom</value> <value>floppy</value> <value>lun</value> </enum> <enum name='bus'> <value>ide</value> <value>fdc</value> <value>scsi</value> <value>virtio</value> <value>xen</value> <value>usb</value> <value>sata</value> <value>sd</value> </enum> </disk> ... </devices> </domainCapabilities> </pre> <dl> <dt><code>diskDevice</code></dt> <dd>Options for the <code>device</code> attribute of the <disk/> element.</dd> <dt><code>bus</code></dt> <dd>Options for the <code>bus</code> attribute of the <target/> element for a <disk/>.</dd> </dl> <h4><a id="elementsGraphics">Graphical framebuffers</a></h4> <p>Graphics device capabilities are exposed under the <code>graphics</code> element. For instance:</p> <pre> <domainCapabilities> ... <devices> <graphics supported='yes'> <enum name='type'> <value>sdl</value> <value>vnc</value> <value>spice</value> </enum> </graphics> ... </devices> </domainCapabilities> </pre> <dl> <dt><code>type</code></dt> <dd>Options for the <code>type</code> attribute of the <graphics/> element.</dd> </dl> <h4><a id="elementsVideo">Video device</a></h4> <p>Video device capabilities are exposed under the <code>video</code> element. For instance:</p> <pre> <domainCapabilities> ... <devices> <video supported='yes'> <enum name='modelType'> <value>vga</value> <value>cirrus</value> <value>vmvga</value> <value>qxl</value> <value>virtio</value> </enum> </video> ... </devices> </domainCapabilities> </pre> <dl> <dt><code>modelType</code></dt> <dd>Options for the <code>type</code> attribute of the <video><model> element.</dd> </dl> <h4><a id="elementsHostDev">Host device assignment</a></h4> <p>Some host devices can be passed through to a guest (e.g. USB, PCI and SCSI). Well, only if the following is enabled:</p> <pre> <domainCapabilities> ... <devices> <hostdev supported='yes'> <enum name='mode'> <value>subsystem</value> <value>capabilities</value> </enum> <enum name='startupPolicy'> <value>default</value> <value>mandatory</value> <value>requisite</value> <value>optional</value> </enum> <enum name='subsysType'> <value>usb</value> <value>pci</value> <value>scsi</value> </enum> <enum name='capsType'> <value>storage</value> <value>misc</value> <value>net</value> </enum> <enum name='pciBackend'> <value>default</value> <value>kvm</value> <value>vfio</value> <value>xen</value> </enum> </hostdev> </devices> </domainCapabilities> </pre> <dl> <dt><code>mode</code></dt> <dd>Options for the <code>mode</code> attribute of the <hostdev/> element.</dd> <dt><code>startupPolicy</code></dt> <dd>Options for the <code>startupPolicy</code> attribute of the <hostdev/> element.</dd> <dt><code>subsysType</code></dt> <dd>Options for the <code>type</code> attribute of the <hostdev/> element in case of <code>mode="subsystem"</code>.</dd> <dt><code>capsType</code></dt> <dd>Options for the <code>type</code> attribute of the <hostdev/> element in case of <code>mode="capabilities"</code>.</dd> <dt><code>pciBackend</code></dt> <dd>Options for the <code>name</code> attribute of the <driver/> element.</dd> </dl> <h4><a id="elementsRNG">RNG device</a></h4> <p>RNG device capabilities are exposed under the <code>rng</code> element. For instance:</p> <pre> <domainCapabilities> ... <devices> <rng supported='yes'> <enum name='model'> <value>virtio</value> <value>virtio-transitional</value> <value>virtio-non-transitional</value> </enum> <enum name='backendModel'> <value>random</value> <value>egd</value> <value>builtin</value> </enum> </rng> ... </devices> </domainCapabilities> </pre> <dl> <dt><code>model</code></dt> <dd>Options for the <code>model</code> attribute of the <rng> element.</dd> <dt><code>backendModel</code></dt> <dd>Options for the <code>model</code> attribute of the <rng><backend> element.</dd> </dl> <h3><a id="elementsFeatures">Features</a></h3> <p>One more set of XML elements describe the supported features and their capabilities. All features occur as children of the main <code>features</code> element.</p> <pre> <domainCapabilities> ... <features> <gic supported='yes'> <enum name='version'> <value>2</value> <value>3</value> </enum> </gic> <vmcoreinfo supported='yes'/> <genid supported='yes'/> <backingStoreInput supported='yes'/> <backup supported='yes'/> <sev> <cbitpos>47</cbitpos> <reduced-phys-bits>1</reduced-phys-bits> </sev> </features> </domainCapabilities> </pre> <p>Reported capabilities are expressed as an enumerated list of possible values for each of the elements or attributes. For example, the <code>gic</code> element has an attribute <code>version</code> which can support the values <code>2</code> or <code>3</code>.</p> <p>For information about the purpose of each feature, see the <a href="formatdomain.html#elementsFeatures">relevant section</a> in the domain XML documentation. </p> <h4><a id="elementsGIC">GIC capabilities</a></h4> <p>GIC capabilities are exposed under the <code>gic</code> element.</p> <dl> <dt><code>version</code></dt> <dd>Options for the <code>version</code> attribute of the <code>gic</code> element.</dd> </dl> <h4><a id="elementsvmcoreinfo">vmcoreinfo</a></h4> <p>Reports whether the vmcoreinfo feature can be enabled.</p> <h4><a id="elementsgenid">genid</a></h4> <p>Reports whether the genid feature can be used by the domain.</p> <h4><a id="featureBackingStoreInput">backingStoreInput</a></h4> <p>Reports whether the hypervisor will obey the <backingStore> elements configured for a <disk> when booting the guest, hotplugging the disk to a running guest, or similar. <span class="since">(Since 5.10)</span> </p> <h4><a id="featureBackup">backup</a></h4> <p>Reports whether the hypervisor supports the backup, checkpoint, and related features. (<code>virDomainBackupBegin</code>, <code>virDomainCheckpointCreateXML</code> etc). The presence of the <code>backup</code> element even if <code>supported='no'</code> implies that the <code>VIR_DOMAIN_UNDEFINE_CHECKPOINTS_METADATA</code> flag for <code>virDomainUndefine</code> is supported. </p> <h4><a id="elementsSEV">SEV capabilities</a></h4> <p>AMD Secure Encrypted Virtualization (SEV) capabilities are exposed under the <code>sev</code> element. SEV is an extension to the AMD-V architecture which supports running virtual machines (VMs) under the control of a hypervisor. When supported, guest owner can create a VM whose memory contents will be transparently encrypted with a key unique to that VM.</p> <p> For more details on the SEV feature, please follow resources in the AMD developer's document store. In order to use SEV with libvirt have a look at <a href="formatdomain.html#launchSecurity">SEV in domain XML</a> </p> <dl> <dt><code>cbitpos</code></dt> <dd>When memory encryption is enabled, one of the physical address bits (aka the C-bit) is utilized to mark if a memory page is protected. The C-bit position is Hypervisor dependent.</dd> <dt><code>reducedPhysBits</code></dt> <dd>When memory encryption is enabled, we lose certain bits in physical address space. The number of bits we lose is hypervisor dependent.</dd> </dl> </body> </html>