mirror of
https://gitlab.com/libvirt/libvirt.git
synced 2024-12-23 14:15:28 +00:00
77f72a8615
Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.
Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP). That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).
In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:
<interface type='ethernet'>
<target dev='mytap0' managed='no'/>
...
</interface>
This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.
(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
9119 lines
381 KiB
XML
9119 lines
381 KiB
XML
<?xml version="1.0" encoding="UTF-8"?>
|
|
<!DOCTYPE html>
|
|
<html xmlns="http://www.w3.org/1999/xhtml">
|
|
<body>
|
|
<h1>Domain XML format</h1>
|
|
|
|
<ul id="toc"></ul>
|
|
|
|
<p>
|
|
This section describes the XML format used to represent domains, there are
|
|
variations on the format based on the kind of domains run and the options
|
|
used to launch them. For hypervisor specific details consult the
|
|
<a href="drivers.html">driver docs</a>
|
|
</p>
|
|
|
|
|
|
<h2><a id="elements">Element and attribute overview</a></h2>
|
|
|
|
<p>
|
|
The root element required for all virtual machines is
|
|
named <code>domain</code>. It has two attributes, the
|
|
<a id="attributeDomainType"><code>type</code></a>
|
|
specifies the hypervisor used for running
|
|
the domain. The allowed values are driver specific, but
|
|
include "xen", "kvm", "qemu" and "lxc". The
|
|
second attribute is <code>id</code> which is a unique
|
|
integer identifier for the running guest machine. Inactive
|
|
machines have no id value.
|
|
</p>
|
|
|
|
|
|
<h3><a id="elementsMetadata">General metadata</a></h3>
|
|
|
|
<pre>
|
|
<domain type='kvm' id='1'>
|
|
<name>MyGuest</name>
|
|
<uuid>4dea22b3-1d52-d8f3-2516-782e98ab3fa0</uuid>
|
|
<genid>43dc0cf8-809b-4adb-9bea-a9abb5f3d90e</genid>
|
|
<title>A short description - title - of the domain</title>
|
|
<description>Some human readable description</description>
|
|
<metadata>
|
|
<app1:foo xmlns:app1="http://app1.org/app1/">..</app1:foo>
|
|
<app2:bar xmlns:app2="http://app1.org/app2/">..</app2:bar>
|
|
</metadata>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>name</code></dt>
|
|
<dd>The content of the <code>name</code> element provides
|
|
a short name for the virtual machine. This name should
|
|
consist only of alpha-numeric characters and is required
|
|
to be unique within the scope of a single host. It is
|
|
often used to form the filename for storing the persistent
|
|
configuration file. <span class="since">Since 0.0.1</span></dd>
|
|
<dt><code>uuid</code></dt>
|
|
<dd>The content of the <code>uuid</code> element provides
|
|
a globally unique identifier for the virtual machine.
|
|
The format must be RFC 4122 compliant,
|
|
eg <code>3e3fce45-4f53-4fa7-bb32-11f34168b82b</code>.
|
|
If omitted when defining/creating a new machine, a random
|
|
UUID is generated. It is also possible to provide the UUID
|
|
via a <a href="#elementsSysinfo"><code>sysinfo</code></a>
|
|
specification. <span class="since">Since 0.0.1, sysinfo
|
|
since 0.8.7</span></dd>
|
|
|
|
<dt><code>genid</code></dt>
|
|
<dd><span class="since">Since 4.4.0</span>, the <code>genid</code>
|
|
element can be used to add a Virtual Machine Generation ID which
|
|
exposes a 128-bit, cryptographically random, integer value identifier,
|
|
referred to as a Globally Unique Identifier (GUID) using the same
|
|
format as the <code>uuid</code>. The value is used to help notify
|
|
the guest operating system when the virtual machine is re-executing
|
|
something that has already executed before, such as:
|
|
|
|
<ul>
|
|
<li>VM starts executing a snapshot</li>
|
|
<li>VM is recovered from backup</li>
|
|
<li>VM is failover in a disaster recovery environment</li>
|
|
<li>VM is imported, copied, or cloned</li>
|
|
</ul>
|
|
|
|
The guest operating system notices the change and is then able to
|
|
react as appropriate by marking its copies of distributed databases
|
|
as dirty, re-initializing its random number generator, etc.
|
|
|
|
<p>
|
|
The libvirt XML parser will accept both a provided GUID value
|
|
or just <genid/> in which case a GUID will be generated
|
|
and saved in the XML. For the transitions such as above, libvirt
|
|
will change the GUID before re-executing.</p></dd>
|
|
|
|
<dt><code>title</code></dt>
|
|
<dd>The optional element <code>title</code> provides space for a
|
|
short description of the domain. The title should not contain
|
|
any newlines. <span class="since">Since 0.9.10</span>.</dd>
|
|
|
|
<dt><code>description</code></dt>
|
|
<dd>The content of the <code>description</code> element provides a
|
|
human readable description of the virtual machine. This data is not
|
|
used by libvirt in any way, it can contain any information the user
|
|
wants. <span class="since">Since 0.7.2</span></dd>
|
|
|
|
<dt><code>metadata</code></dt>
|
|
<dd>The <code>metadata</code> node can be used by applications
|
|
to store custom metadata in the form of XML
|
|
nodes/trees. Applications must use custom namespaces on their
|
|
XML nodes/trees, with only one top-level element per namespace
|
|
(if the application needs structure, they should have
|
|
sub-elements to their namespace
|
|
element). <span class="since">Since 0.9.10</span></dd>
|
|
</dl>
|
|
|
|
<h3><a id="elementsOS">Operating system booting</a></h3>
|
|
|
|
<p>
|
|
There are a number of different ways to boot virtual machines
|
|
each with their own pros and cons.
|
|
</p>
|
|
|
|
<h4><a id="elementsOSBIOS">BIOS bootloader</a></h4>
|
|
|
|
<p>
|
|
Booting via the BIOS is available for hypervisors supporting
|
|
full virtualization. In this case the BIOS has a boot order
|
|
priority (floppy, harddisk, cdrom, network) determining where
|
|
to obtain/find the boot image.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<os firmware='efi'>
|
|
<type>hvm</type>
|
|
<loader readonly='yes' secure='no' type='rom'>/usr/lib/xen/boot/hvmloader</loader>
|
|
<nvram template='/usr/share/OVMF/OVMF_VARS.fd'>/var/lib/libvirt/nvram/guest_VARS.fd</nvram>
|
|
<boot dev='hd'/>
|
|
<boot dev='cdrom'/>
|
|
<bootmenu enable='yes' timeout='3000'/>
|
|
<smbios mode='sysinfo'/>
|
|
<bios useserial='yes' rebootTimeout='0'/>
|
|
</os>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>firmware</code></dt>
|
|
<dd>The <code>firmware</code> attribute allows management
|
|
applications to automatically fill <code><loader/></code>
|
|
and <code><nvram/></code> elements and possibly enable
|
|
some features required by selected firmware. Accepted values are
|
|
<code>bios</code> and <code>efi</code>.<br/>
|
|
The selection process scans for files describing installed
|
|
firmware images in specified location and uses the most specific
|
|
one which fulfils domain requirements. The locations in order of
|
|
preference (from generic to most specific one) are:
|
|
<ul>
|
|
<li><code>/usr/share/qemu/firmware</code></li>
|
|
<li><code>/etc/qemu/firmware</code></li>
|
|
<li><code>$XDG_CONFIG_HOME/qemu/firmware</code></li>
|
|
</ul>
|
|
For more information refer to firmware metadata specification as
|
|
described in <code>docs/interop/firmware.json</code> in QEMU
|
|
repository. Regular users do not need to bother.
|
|
<span class="since">Since 5.2.0 (QEMU and KVM only)</span><br/>
|
|
For VMware guests, this is set to <code>efi</code> when the guest
|
|
uses UEFI, and it is not set when using BIOS.
|
|
<span class="since">Since 5.3.0 (VMware ESX and Workstation/Player)</span>
|
|
</dd>
|
|
<dt><code>type</code></dt>
|
|
<dd>The content of the <code>type</code> element specifies the
|
|
type of operating system to be booted in the virtual machine.
|
|
<code>hvm</code> indicates that the OS is one designed to run
|
|
on bare metal, so requires full virtualization. <code>linux</code>
|
|
(badly named!) refers to an OS that supports the Xen 3 hypervisor
|
|
guest ABI. There are also two optional attributes, <code>arch</code>
|
|
specifying the CPU architecture to virtualization,
|
|
and <a id="attributeOSTypeMachine"><code>machine</code></a> referring
|
|
to the machine type. The <a href="formatcaps.html">Capabilities XML</a>
|
|
provides details on allowed values for
|
|
these. <span class="since">Since 0.0.1</span></dd>
|
|
<dt><a id="elementLoader"><code>loader</code></a></dt>
|
|
<dd>The optional <code>loader</code> tag refers to a firmware blob,
|
|
which is specified by absolute path,
|
|
used to assist the domain creation process. It is used by Xen
|
|
fully virtualized domains as well as setting the QEMU BIOS file
|
|
path for QEMU/KVM domains. <span class="since">Xen since 0.1.0,
|
|
QEMU/KVM since 0.9.12</span> Then, <span class="since">since
|
|
1.2.8</span> it's possible for the element to have two
|
|
optional attributes: <code>readonly</code> (accepted values are
|
|
<code>yes</code> and <code>no</code>) to reflect the fact that the
|
|
image should be writable or read-only. The second attribute
|
|
<code>type</code> accepts values <code>rom</code> and
|
|
<code>pflash</code>. It tells the hypervisor where in the guest
|
|
memory the file should be mapped. For instance, if the loader
|
|
path points to an UEFI image, <code>type</code> should be
|
|
<code>pflash</code>. Moreover, some firmwares may
|
|
implement the Secure boot feature. Attribute
|
|
<code>secure</code> can be used then to control it.
|
|
<span class="since">Since 2.1.0</span></dd>
|
|
<dt><code>nvram</code></dt>
|
|
<dd>Some UEFI firmwares may want to use a non-volatile memory to store
|
|
some variables. In the host, this is represented as a file and the
|
|
absolute path to the file is stored in this element. Moreover, when the
|
|
domain is started up libvirt copies so called master NVRAM store file
|
|
defined in <code>qemu.conf</code>. If needed, the <code>template</code>
|
|
attribute can be used to per domain override map of master NVRAM stores
|
|
from the config file. Note, that for transient domains if the NVRAM file
|
|
has been created by libvirt it is left behind and it is management
|
|
application's responsibility to save and remove file (if needed to be
|
|
persistent). <span class="since">Since 1.2.8</span></dd>
|
|
<dt><code>boot</code></dt>
|
|
<dd>The <code>dev</code> attribute takes one of the values "fd", "hd",
|
|
"cdrom" or "network" and is used to specify the next boot device
|
|
to consider. The <code>boot</code> element can be repeated multiple
|
|
times to setup a priority list of boot devices to try in turn.
|
|
Multiple devices of the same type are sorted according to their
|
|
targets while preserving the order of buses. After defining the
|
|
domain, its XML configuration returned by libvirt (through
|
|
virDomainGetXMLDesc) lists devices in the sorted order. Once sorted,
|
|
the first device is marked as bootable. Thus, e.g., a domain
|
|
configured to boot from "hd" with vdb, hda, vda, and hdc disks
|
|
assigned to it will boot from vda (the sorted list is vda, vdb, hda,
|
|
hdc). Similar domain with hdc, vda, vdb, and hda disks will boot from
|
|
hda (sorted disks are: hda, hdc, vda, vdb). It can be tricky to
|
|
configure in the desired way, which is why per-device boot elements
|
|
(see <a href="#elementsDisks">disks</a>,
|
|
<a href="#elementsNICS">network interfaces</a>, and
|
|
<a href="#elementsHostDev">USB and PCI devices</a> sections below) were
|
|
introduced and they are the preferred way providing full control over
|
|
booting order. The <code>boot</code> element and per-device boot
|
|
elements are mutually exclusive. <span class="since">Since 0.1.3,
|
|
per-device boot since 0.8.8</span>
|
|
</dd>
|
|
<dt><code>smbios</code></dt>
|
|
<dd>How to populate SMBIOS information visible in the guest.
|
|
The <code>mode</code> attribute must be specified, and is either
|
|
"emulate" (let the hypervisor generate all values), "host" (copy
|
|
all of Block 0 and Block 1, except for the UUID, from the host's
|
|
SMBIOS values;
|
|
the <a href="html/libvirt-libvirt-host.html#virConnectGetSysinfo">
|
|
<code>virConnectGetSysinfo</code></a> call can be
|
|
used to see what values are copied), or "sysinfo" (use the values in
|
|
the <a href="#elementsSysinfo">sysinfo</a> element). If not
|
|
specified, the hypervisor default is used. <span class="since">
|
|
Since 0.8.7</span>
|
|
</dd>
|
|
</dl>
|
|
<p>Up till here the BIOS/UEFI configuration knobs are generic enough to
|
|
be implemented by majority (if not all) firmwares out there. However,
|
|
from now on not every single setting makes sense to all firmwares. For
|
|
instance, <code>rebootTimeout</code> doesn't make sense for UEFI,
|
|
<code>useserial</code> might not be usable with a BIOS firmware that
|
|
doesn't produce any output onto serial line, etc. Moreover, firmwares
|
|
don't usually export their capabilities for libvirt (or users) to check.
|
|
And the set of their capabilities can change with every new release.
|
|
Hence users are advised to try the settings they use before relying on
|
|
them in production.</p>
|
|
<dl>
|
|
<dt><code>bootmenu</code></dt>
|
|
<dd> Whether or not to enable an interactive boot menu prompt on guest
|
|
startup. The <code>enable</code> attribute can be either "yes" or "no".
|
|
If not specified, the hypervisor default is used. <span class="since">
|
|
Since 0.8.3</span>
|
|
Additional attribute <code>timeout</code> takes the number of milliseconds
|
|
the boot menu should wait until it times out. Allowed values are numbers
|
|
in range [0, 65535] inclusive and it is ignored unless <code>enable</code>
|
|
is set to "yes". <span class="since">Since 1.2.8</span>
|
|
</dd>
|
|
<dt><code>bios</code></dt>
|
|
<dd>This element has attribute <code>useserial</code> with possible
|
|
values <code>yes</code> or <code>no</code>. It enables or disables
|
|
Serial Graphics Adapter which allows users to see BIOS messages
|
|
on a serial port. Therefore, one needs to have
|
|
<a href="#elementCharSerial">serial port</a> defined.
|
|
<span class="since">Since 0.9.4</span>.
|
|
<span class="since">Since 0.10.2 (QEMU only)</span> there is
|
|
another attribute, <code>rebootTimeout</code> that controls
|
|
whether and after how long the guest should start booting
|
|
again in case the boot fails (according to BIOS). The value is
|
|
in milliseconds with maximum of <code>65535</code> and special
|
|
value <code>-1</code> disables the reboot.
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsOSBootloader">Host bootloader</a></h4>
|
|
|
|
<p>
|
|
Hypervisors employing paravirtualization do not usually emulate
|
|
a BIOS, and instead the host is responsible to kicking off the
|
|
operating system boot. This may use a pseudo-bootloader in the
|
|
host to provide an interface to choose a kernel for the guest.
|
|
An example is <code>pygrub</code> with Xen. The Bhyve hypervisor
|
|
also uses a host bootloader, either <code>bhyveload</code> or
|
|
<code>grub-bhyve</code>.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<bootloader>/usr/bin/pygrub</bootloader>
|
|
<bootloader_args>--append single</bootloader_args>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>bootloader</code></dt>
|
|
<dd>The content of the <code>bootloader</code> element provides
|
|
a fully qualified path to the bootloader executable in the
|
|
host OS. This bootloader will be run to choose which kernel
|
|
to boot. The required output of the bootloader is dependent
|
|
on the hypervisor in use. <span class="since">Since 0.1.0</span></dd>
|
|
<dt><code>bootloader_args</code></dt>
|
|
<dd>The optional <code>bootloader_args</code> element allows
|
|
command line arguments to be passed to the bootloader.
|
|
<span class="since">Since 0.2.3</span>
|
|
</dd>
|
|
|
|
</dl>
|
|
|
|
<h4><a id="elementsOSKernel">Direct kernel boot</a></h4>
|
|
|
|
<p>
|
|
When installing a new guest OS it is often useful to boot directly
|
|
from a kernel and initrd stored in the host OS, allowing command
|
|
line arguments to be passed directly to the installer. This capability
|
|
is usually available for both para and full virtualized guests.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<os>
|
|
<type>hvm</type>
|
|
<loader>/usr/lib/xen/boot/hvmloader</loader>
|
|
<kernel>/root/f8-i386-vmlinuz</kernel>
|
|
<initrd>/root/f8-i386-initrd</initrd>
|
|
<cmdline>console=ttyS0 ks=http://example.com/f8-i386/os/</cmdline>
|
|
<dtb>/root/ppc.dtb</dtb>
|
|
<acpi>
|
|
<table type='slic'>/path/to/slic.dat</table>
|
|
</acpi>
|
|
</os>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>type</code></dt>
|
|
<dd>This element has the same semantics as described earlier in the
|
|
<a href="#elementsOSBIOS">BIOS boot section</a></dd>
|
|
<dt><code>loader</code></dt>
|
|
<dd>This element has the same semantics as described earlier in the
|
|
<a href="#elementsOSBIOS">BIOS boot section</a></dd>
|
|
<dt><code>kernel</code></dt>
|
|
<dd>The contents of this element specify the fully-qualified path
|
|
to the kernel image in the host OS.</dd>
|
|
<dt><code>initrd</code></dt>
|
|
<dd>The contents of this element specify the fully-qualified path
|
|
to the (optional) ramdisk image in the host OS.</dd>
|
|
<dt><code>cmdline</code></dt>
|
|
<dd>The contents of this element specify arguments to be passed to
|
|
the kernel (or installer) at boot time. This is often used to
|
|
specify an alternate primary console (eg serial port), or the
|
|
installation media source / kickstart file</dd>
|
|
<dt><code>dtb</code></dt>
|
|
<dd>The contents of this element specify the fully-qualified path
|
|
to the (optional) device tree binary (dtb) image in the host OS.
|
|
<span class="since">Since 1.0.4</span></dd>
|
|
<dt><code>acpi</code></dt>
|
|
<dd>The <code>table</code> element contains a fully-qualified path
|
|
to the ACPI table. The <code>type</code> attribute contains the
|
|
ACPI table type (currently only <code>slic</code> is supported)
|
|
<span class="since">Since 1.3.5 (QEMU only)</span></dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsOSContainer">Container boot</a></h4>
|
|
|
|
<p>
|
|
When booting a domain using container based virtualization, instead
|
|
of a kernel / boot image, a path to the init binary is required, using
|
|
the <code>init</code> element. By default this will be launched with
|
|
no arguments. To specify the initial argv, use the <code>initarg</code>
|
|
element, repeated as many time as is required. The <code>cmdline</code>
|
|
element, if set will be used to provide an equivalent to <code>/proc/cmdline</code>
|
|
but will not affect init argv.
|
|
</p>
|
|
<p>
|
|
To set environment variables, use the <code>initenv</code> element, one
|
|
for each variable.
|
|
</p>
|
|
<p>
|
|
To set a custom work directory for the init, use the <code>initdir</code>
|
|
element.
|
|
</p>
|
|
<p>
|
|
To run the init command as a given user or group, use the <code>inituser</code>
|
|
or <code>initgroup</code> elements respectively. Both elements can be provided
|
|
either a user (resp. group) id or a name. Prefixing the user or group id with
|
|
a <code>+</code> will force it to be considered like a numeric value. Without
|
|
this, it will be first tried as a user or group name.
|
|
</p>
|
|
|
|
<pre>
|
|
<os>
|
|
<type arch='x86_64'>exe</type>
|
|
<init>/bin/systemd</init>
|
|
<initarg>--unit</initarg>
|
|
<initarg>emergency.service</initarg>
|
|
<initenv name='MYENV'>some value</initenv>
|
|
<initdir>/my/custom/cwd</initdir>
|
|
<inituser>tester</inituser>
|
|
<initgroup>1000</initgroup>
|
|
</os>
|
|
</pre>
|
|
|
|
|
|
<p>
|
|
If you want to enable user namespace, set the <code>idmap</code> element.
|
|
The <code>uid</code> and <code>gid</code> elements have three attributes:
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>start</code></dt>
|
|
<dd>First user ID in container. It must be '0'.</dd>
|
|
<dt><code>target</code></dt>
|
|
<dd>The first user ID in container will be mapped to this target user
|
|
ID in host.</dd>
|
|
<dt><code>count</code></dt>
|
|
<dd>How many users in container are allowed to map to host's user.</dd>
|
|
</dl>
|
|
|
|
<pre>
|
|
<idmap>
|
|
<uid start='0' target='1000' count='10'/>
|
|
<gid start='0' target='1000' count='10'/>
|
|
</idmap>
|
|
</pre>
|
|
|
|
|
|
<h3><a id="elementsSysinfo">SMBIOS System Information</a></h3>
|
|
|
|
<p>
|
|
Some hypervisors allow control over what system information is
|
|
presented to the guest (for example, SMBIOS fields can be
|
|
populated by a hypervisor and inspected via
|
|
the <code>dmidecode</code> command in the guest). The
|
|
optional <code>sysinfo</code> element covers all such categories
|
|
of information. <span class="since">Since 0.8.7</span>
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<os>
|
|
<smbios mode='sysinfo'/>
|
|
...
|
|
</os>
|
|
<sysinfo type='smbios'>
|
|
<bios>
|
|
<entry name='vendor'>LENOVO</entry>
|
|
</bios>
|
|
<system>
|
|
<entry name='manufacturer'>Fedora</entry>
|
|
<entry name='product'>Virt-Manager</entry>
|
|
<entry name='version'>0.9.4</entry>
|
|
</system>
|
|
<baseBoard>
|
|
<entry name='manufacturer'>LENOVO</entry>
|
|
<entry name='product'>20BE0061MC</entry>
|
|
<entry name='version'>0B98401 Pro</entry>
|
|
<entry name='serial'>W1KS427111E</entry>
|
|
</baseBoard>
|
|
<chassis>
|
|
<entry name='manufacturer'>Dell Inc.</entry>
|
|
<entry name='version'>2.12</entry>
|
|
<entry name='serial'>65X0XF2</entry>
|
|
<entry name='asset'>40000101</entry>
|
|
<entry name='sku'>Type3Sku1</entry>
|
|
</chassis>
|
|
<oemStrings>
|
|
<entry>myappname:some arbitrary data</entry>
|
|
<entry>otherappname:more arbitrary data</entry>
|
|
</oemStrings>
|
|
</sysinfo>
|
|
...</pre>
|
|
|
|
<p>
|
|
The <code>sysinfo</code> element has a mandatory
|
|
attribute <code>type</code> that determine the layout of
|
|
sub-elements, with supported values of:
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>smbios</code></dt>
|
|
<dd>Sub-elements call out specific SMBIOS values, which will
|
|
affect the guest if used in conjunction with
|
|
the <code>smbios</code> sub-element of
|
|
the <a href="#elementsOS"><code>os</code></a> element. Each
|
|
sub-element of <code>sysinfo</code> names a SMBIOS block, and
|
|
within those elements can be a list of <code>entry</code>
|
|
elements that describe a field within the block. The following
|
|
blocks and entries are recognized:
|
|
<dl>
|
|
<dt><code>bios</code></dt>
|
|
<dd>
|
|
This is block 0 of SMBIOS, with entry names drawn from:
|
|
<dl>
|
|
<dt><code>vendor</code></dt>
|
|
<dd>BIOS Vendor's Name</dd>
|
|
<dt><code>version</code></dt>
|
|
<dd>BIOS Version</dd>
|
|
<dt><code>date</code></dt>
|
|
<dd>BIOS release date. If supplied, is in either mm/dd/yy or
|
|
mm/dd/yyyy format. If the year portion of the string is
|
|
two digits, the year is assumed to be 19yy.</dd>
|
|
<dt><code>release</code></dt>
|
|
<dd>System BIOS Major and Minor release number values
|
|
concatenated together as one string separated by
|
|
a period, for example, 10.22.</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>system</code></dt>
|
|
<dd>
|
|
This is block 1 of SMBIOS, with entry names drawn from:
|
|
<dl>
|
|
<dt><code>manufacturer</code></dt>
|
|
<dd>Manufacturer of BIOS</dd>
|
|
<dt><code>product</code></dt>
|
|
<dd>Product Name</dd>
|
|
<dt><code>version</code></dt>
|
|
<dd>Version of the product</dd>
|
|
<dt><code>serial</code></dt>
|
|
<dd>Serial number</dd>
|
|
<dt><code>uuid</code></dt>
|
|
<dd>Universal Unique ID number. If this entry is provided
|
|
alongside a top-level
|
|
<a href="#elementsMetadata"><code>uuid</code></a> element,
|
|
then the two values must match.</dd>
|
|
<dt><code>sku</code></dt>
|
|
<dd>SKU number to identify a particular configuration.</dd>
|
|
<dt><code>family</code></dt>
|
|
<dd>Identify the family a particular computer belongs to.</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>baseBoard</code></dt>
|
|
<dd>
|
|
This is block 2 of SMBIOS. This element can be repeated multiple
|
|
times to describe all the base boards; however, not all
|
|
hypervisors necessarily support the repetition. The element can
|
|
have the following children:
|
|
<dl>
|
|
<dt><code>manufacturer</code></dt>
|
|
<dd>Manufacturer of BIOS</dd>
|
|
<dt><code>product</code></dt>
|
|
<dd>Product Name</dd>
|
|
<dt><code>version</code></dt>
|
|
<dd>Version of the product</dd>
|
|
<dt><code>serial</code></dt>
|
|
<dd>Serial number</dd>
|
|
<dt><code>asset</code></dt>
|
|
<dd>Asset tag</dd>
|
|
<dt><code>location</code></dt>
|
|
<dd>Location in chassis</dd>
|
|
</dl>
|
|
NB: Incorrectly supplied entries for the
|
|
<code>bios</code>, <code>system</code> or <code>baseBoard</code>
|
|
blocks will be ignored without error. Other than <code>uuid</code>
|
|
validation and <code>date</code> format checking, all values are
|
|
passed as strings to the hypervisor driver.
|
|
</dd>
|
|
<dt><code>chassis</code></dt>
|
|
<dd>
|
|
<span class="since">Since 4.1.0,</span> this is block 3 of
|
|
SMBIOS, with entry names drawn from:
|
|
<dl>
|
|
<dt><code>manufacturer</code></dt>
|
|
<dd>Manufacturer of Chassis</dd>
|
|
<dt><code>version</code></dt>
|
|
<dd>Version of the Chassis</dd>
|
|
<dt><code>serial</code></dt>
|
|
<dd>Serial number</dd>
|
|
<dt><code>asset</code></dt>
|
|
<dd>Asset tag</dd>
|
|
<dt><code>sku</code></dt>
|
|
<dd>SKU number</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>oemStrings</code></dt>
|
|
<dd>
|
|
This is block 11 of SMBIOS. This element should appear once and
|
|
can have multiple <code>entry</code> child elements, each providing
|
|
arbitrary string data. There are no restrictions on what data can
|
|
be provided in the entries, however, if the data is intended to be
|
|
consumed by an application in the guest, it is recommended to use
|
|
the application name as a prefix in the string. (<span class="since">Since 4.1.0</span>)
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h3><a id="elementsCPUAllocation">CPU Allocation</a></h3>
|
|
|
|
<pre>
|
|
<domain>
|
|
...
|
|
<vcpu placement='static' cpuset="1-4,^3,6" current="1">2</vcpu>
|
|
<vcpus>
|
|
<vcpu id='0' enabled='yes' hotpluggable='no' order='1'/>
|
|
<vcpu id='1' enabled='no' hotpluggable='yes'/>
|
|
</vcpus>
|
|
...
|
|
</domain>
|
|
</pre>
|
|
|
|
<dl>
|
|
<dt><code>vcpu</code></dt>
|
|
<dd>The content of this element defines the maximum number of virtual
|
|
CPUs allocated for the guest OS, which must be between 1 and
|
|
the maximum supported by the hypervisor.
|
|
<dl>
|
|
<dt><code>cpuset</code></dt>
|
|
<dd>
|
|
The optional attribute <code>cpuset</code> is a comma-separated
|
|
list of physical CPU numbers that domain process and virtual CPUs
|
|
can be pinned to by default. (NB: The pinning policy of domain
|
|
process and virtual CPUs can be specified separately by
|
|
<code>cputune</code>. If the attribute <code>emulatorpin</code>
|
|
of <code>cputune</code> is specified, the <code>cpuset</code>
|
|
specified by <code>vcpu</code> here will be ignored. Similarly,
|
|
for virtual CPUs which have the <code>vcpupin</code> specified,
|
|
the <code>cpuset</code> specified by <code>cpuset</code> here
|
|
will be ignored. For virtual CPUs which don't have
|
|
<code>vcpupin</code> specified, each will be pinned to the physical
|
|
CPUs specified by <code>cpuset</code> here).
|
|
Each element in that list is either a single CPU number,
|
|
a range of CPU numbers, or a caret followed by a CPU number to
|
|
be excluded from a previous range.
|
|
<span class="since">Since 0.4.4</span>
|
|
</dd>
|
|
<dt><code>current</code></dt>
|
|
<dd>
|
|
The optional attribute <code>current</code> can
|
|
be used to specify whether fewer than the maximum number of
|
|
virtual CPUs should be enabled.
|
|
<span class="since">Since 0.8.5</span>
|
|
</dd>
|
|
<dt><code>placement</code></dt>
|
|
<dd>
|
|
The optional attribute <code>placement</code> can be used to
|
|
indicate the CPU placement mode for domain process. The value can
|
|
be either "static" or "auto", but defaults to <code>placement</code>
|
|
of <code>numatune</code> or "static" if <code>cpuset</code> is
|
|
specified. Using "auto" indicates the domain process will be pinned
|
|
to the advisory nodeset from querying numad and the value of
|
|
attribute <code>cpuset</code> will be ignored if it's specified.
|
|
If both <code>cpuset</code> and <code>placement</code> are not
|
|
specified or if <code>placement</code> is "static", but no
|
|
<code>cpuset</code> is specified, the domain process will be
|
|
pinned to all the available physical CPUs.
|
|
<span class="since">Since 0.9.11 (QEMU and KVM only)</span>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>vcpus</code></dt>
|
|
<dd>
|
|
The vcpus element allows to control state of individual vCPUs.
|
|
|
|
The <code>id</code> attribute specifies the vCPU id as used by libvirt
|
|
in other places such as vCPU pinning, scheduler information and NUMA
|
|
assignment. Note that the vCPU ID as seen in the guest may differ from
|
|
libvirt ID in certain cases. Valid IDs are from 0 to the maximum vCPU
|
|
count as set by the <code>vcpu</code> element minus 1.
|
|
|
|
The <code>enabled</code> attribute allows to control the state of the
|
|
vCPU. Valid values are <code>yes</code> and <code>no</code>.
|
|
|
|
<code>hotpluggable</code> controls whether given vCPU can be hotplugged
|
|
and hotunplugged in cases when the CPU is enabled at boot. Note that
|
|
all disabled vCPUs must be hotpluggable. Valid values are
|
|
<code>yes</code> and <code>no</code>.
|
|
|
|
<code>order</code> allows to specify the order to add the online vCPUs.
|
|
For hypervisors/platforms that require to insert multiple vCPUs at once
|
|
the order may be duplicated across all vCPUs that need to be
|
|
enabled at once. Specifying order is not necessary, vCPUs are then
|
|
added in an arbitrary order. If order info is used, it must be used for
|
|
all online vCPUs. Hypervisors may clear or update ordering information
|
|
during certain operations to assure valid configuration.
|
|
|
|
Note that hypervisors may create hotpluggable vCPUs differently from
|
|
boot vCPUs thus special initialization may be necessary.
|
|
|
|
Hypervisors may require that vCPUs enabled on boot which are not
|
|
hotpluggable are clustered at the beginning starting with ID 0. It may
|
|
be also required that vCPU 0 is always present and non-hotpluggable.
|
|
|
|
Note that providing state for individual CPUs may be necessary to enable
|
|
support of addressable vCPU hotplug and this feature may not be
|
|
supported by all hypervisors.
|
|
|
|
For QEMU the following conditions are required. vCPU 0 needs to be
|
|
enabled and non-hotpluggable. On PPC64 along with it vCPUs that are in
|
|
the same core need to be enabled as well. All non-hotpluggable CPUs
|
|
present at boot need to be grouped after vCPU 0.
|
|
<span class="since">Since 2.2.0 (QEMU only)</span>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h3><a id="elementsIOThreadsAllocation">IOThreads Allocation</a></h3>
|
|
<p>
|
|
IOThreads are dedicated event loop threads for supported disk
|
|
devices to perform block I/O requests in order to improve
|
|
scalability especially on an SMP host/guest with many LUNs.
|
|
<span class="since">Since 1.2.8 (QEMU only)</span>
|
|
</p>
|
|
|
|
<pre>
|
|
<domain>
|
|
...
|
|
<iothreads>4</iothreads>
|
|
...
|
|
</domain>
|
|
</pre>
|
|
<pre>
|
|
<domain>
|
|
...
|
|
<iothreadids>
|
|
<iothread id="2"/>
|
|
<iothread id="4"/>
|
|
<iothread id="6"/>
|
|
<iothread id="8"/>
|
|
</iothreadids>
|
|
...
|
|
</domain>
|
|
</pre>
|
|
|
|
<dl>
|
|
<dt><code>iothreads</code></dt>
|
|
<dd>
|
|
The content of this optional element defines the number
|
|
of IOThreads to be assigned to the domain for use by
|
|
supported target storage devices. There
|
|
should be only 1 or 2 IOThreads per host CPU. There may be more
|
|
than one supported device assigned to each IOThread.
|
|
<span class="since">Since 1.2.8</span>
|
|
</dd>
|
|
<dt><code>iothreadids</code></dt>
|
|
<dd>
|
|
The optional <code>iothreadids</code> element provides the capability
|
|
to specifically define the IOThread ID's for the domain. By default,
|
|
IOThread ID's are sequentially numbered starting from 1 through the
|
|
number of <code>iothreads</code> defined for the domain. The
|
|
<code>id</code> attribute is used to define the IOThread ID. The
|
|
<code>id</code> attribute must be a positive integer greater than 0.
|
|
If there are less <code>iothreadids</code> defined than
|
|
<code>iothreads</code> defined for the domain, then libvirt will
|
|
sequentially fill <code>iothreadids</code> starting at 1 avoiding
|
|
any predefined <code>id</code>. If there are more
|
|
<code>iothreadids</code> defined than <code>iothreads</code>
|
|
defined for the domain, then the <code>iothreads</code> value
|
|
will be adjusted accordingly.
|
|
<span class="since">Since 1.2.15</span>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h3><a id="elementsCPUTuning">CPU Tuning</a></h3>
|
|
|
|
<pre>
|
|
<domain>
|
|
...
|
|
<cputune>
|
|
<vcpupin vcpu="0" cpuset="1-4,^2"/>
|
|
<vcpupin vcpu="1" cpuset="0,1"/>
|
|
<vcpupin vcpu="2" cpuset="2,3"/>
|
|
<vcpupin vcpu="3" cpuset="0,4"/>
|
|
<emulatorpin cpuset="1-3"/>
|
|
<iothreadpin iothread="1" cpuset="5,6"/>
|
|
<iothreadpin iothread="2" cpuset="7,8"/>
|
|
<shares>2048</shares>
|
|
<period>1000000</period>
|
|
<quota>-1</quota>
|
|
<global_period>1000000</global_period>
|
|
<global_quota>-1</global_quota>
|
|
<emulator_period>1000000</emulator_period>
|
|
<emulator_quota>-1</emulator_quota>
|
|
<iothread_period>1000000</iothread_period>
|
|
<iothread_quota>-1</iothread_quota>
|
|
<vcpusched vcpus='0-4,^3' scheduler='fifo' priority='1'/>
|
|
<iothreadsched iothreads='2' scheduler='batch'/>
|
|
<cachetune vcpus='0-3'>
|
|
<cache id='0' level='3' type='both' size='3' unit='MiB'/>
|
|
<cache id='1' level='3' type='both' size='3' unit='MiB'/>
|
|
<monitor level='3' vcpus='1'/>
|
|
<monitor level='3' vcpus='0-3'/>
|
|
</cachetune>
|
|
<cachetune vcpus='4-5'>
|
|
<monitor level='3' vcpus='4'/>
|
|
<monitor level='3' vcpus='5'/>
|
|
</cachetune>
|
|
<memorytune vcpus='0-3'>
|
|
<node id='0' bandwidth='60'/>
|
|
</memorytune>
|
|
|
|
</cputune>
|
|
...
|
|
</domain>
|
|
</pre>
|
|
|
|
<dl>
|
|
<dt><code>cputune</code></dt>
|
|
<dd>
|
|
The optional <code>cputune</code> element provides details
|
|
regarding the CPU tunable parameters for the domain.
|
|
<span class="since">Since 0.9.0</span>
|
|
</dd>
|
|
<dt><code>vcpupin</code></dt>
|
|
<dd>
|
|
The optional <code>vcpupin</code> element specifies which of host's
|
|
physical CPUs the domain vCPU will be pinned to. If this is omitted,
|
|
and attribute <code>cpuset</code> of element <code>vcpu</code> is
|
|
not specified, the vCPU is pinned to all the physical CPUs by default.
|
|
It contains two required attributes, the attribute <code>vcpu</code>
|
|
specifies vCPU id, and the attribute <code>cpuset</code> is same as
|
|
attribute <code>cpuset</code> of element <code>vcpu</code>.
|
|
(NB: Only qemu driver support)
|
|
<span class="since">Since 0.9.0</span>
|
|
</dd>
|
|
<dt><code>emulatorpin</code></dt>
|
|
<dd>
|
|
The optional <code>emulatorpin</code> element specifies which of host
|
|
physical CPUs the "emulator", a subset of a domain not including vCPU
|
|
or iothreads will be pinned to. If this is omitted, and attribute
|
|
<code>cpuset</code> of element <code>vcpu</code> is not specified,
|
|
"emulator" is pinned to all the physical CPUs by default. It contains
|
|
one required attribute <code>cpuset</code> specifying which physical
|
|
CPUs to pin to.
|
|
</dd>
|
|
<dt><code>iothreadpin</code></dt>
|
|
<dd>
|
|
The optional <code>iothreadpin</code> element specifies which of host
|
|
physical CPUs the IOThreads will be pinned to. If this is omitted
|
|
and attribute <code>cpuset</code> of element <code>vcpu</code> is
|
|
not specified, the IOThreads are pinned to all the physical CPUs
|
|
by default. There are two required attributes, the attribute
|
|
<code>iothread</code> specifies the IOThread ID and the attribute
|
|
<code>cpuset</code> specifying which physical CPUs to pin to. See
|
|
the <code>iothreadids</code>
|
|
<a href="#elementsIOThreadsAllocation"><code>description</code></a>
|
|
for valid <code>iothread</code> values.
|
|
<span class="since">Since 1.2.9</span>
|
|
</dd>
|
|
<dt><code>shares</code></dt>
|
|
<dd>
|
|
The optional <code>shares</code> element specifies the proportional
|
|
weighted share for the domain. If this is omitted, it defaults to
|
|
the OS provided defaults. NB, There is no unit for the value,
|
|
it's a relative measure based on the setting of other VM,
|
|
e.g. A VM configured with value
|
|
2048 will get twice as much CPU time as a VM configured with value 1024.
|
|
<span class="since">Since 0.9.0</span>
|
|
</dd>
|
|
<dt><code>period</code></dt>
|
|
<dd>
|
|
The optional <code>period</code> element specifies the enforcement
|
|
interval (unit: microseconds). Within <code>period</code>, each vCPU of
|
|
the domain will not be allowed to consume more than <code>quota</code>
|
|
worth of runtime. The value should be in range [1000, 1000000]. A period
|
|
with value 0 means no value.
|
|
<span class="since">Only QEMU driver support since 0.9.4, LXC since
|
|
0.9.10</span>
|
|
</dd>
|
|
<dt><code>quota</code></dt>
|
|
<dd>
|
|
The optional <code>quota</code> element specifies the maximum allowed
|
|
bandwidth (unit: microseconds). A domain with <code>quota</code> as any
|
|
negative value indicates that the domain has infinite bandwidth for
|
|
vCPU threads, which means that it is not bandwidth controlled. The value
|
|
should be in range [1000, 18446744073709551] or less than 0. A quota
|
|
with value 0 means no value. You can use this feature to ensure that all
|
|
vCPUs run at the same speed.
|
|
<span class="since">Only QEMU driver support since 0.9.4, LXC since
|
|
0.9.10</span>
|
|
</dd>
|
|
<dt><code>global_period</code></dt>
|
|
<dd>
|
|
The optional <code>global_period</code> element specifies the
|
|
enforcement CFS scheduler interval (unit: microseconds) for the whole
|
|
domain in contrast with <code>period</code> which enforces the interval
|
|
per vCPU. The value should be in range 1000, 1000000]. A
|
|
<code>global_period</code> with value 0 means no value.
|
|
<span class="since">Only QEMU driver support since 1.3.3</span>
|
|
</dd>
|
|
<dt><code>global_quota</code></dt>
|
|
<dd>
|
|
The optional <code>global_quota</code> element specifies the maximum
|
|
allowed bandwidth (unit: microseconds) within a period for the whole
|
|
domain. A domain with <code>global_quota</code> as any negative
|
|
value indicates that the domain has infinite bandwidth, which means that
|
|
it is not bandwidth controlled. The value should be in range
|
|
[1000, 18446744073709551] or less than 0. A <code>global_quota</code>
|
|
with value 0 means no value.
|
|
<span class="since">Only QEMU driver support since 1.3.3</span>
|
|
</dd>
|
|
|
|
<dt><code>emulator_period</code></dt>
|
|
<dd>
|
|
The optional <code>emulator_period</code> element specifies the enforcement
|
|
interval (unit: microseconds). Within <code>emulator_period</code>, emulator
|
|
threads (those excluding vCPUs) of the domain will not be allowed to consume
|
|
more than <code>emulator_quota</code> worth of runtime. The value should be
|
|
in range [1000, 1000000]. A period with value 0 means no value.
|
|
<span class="since">Only QEMU driver support since 0.10.0</span>
|
|
</dd>
|
|
<dt><code>emulator_quota</code></dt>
|
|
<dd>
|
|
The optional <code>emulator_quota</code> element specifies the maximum
|
|
allowed bandwidth (unit: microseconds) for domain's emulator threads (those
|
|
excluding vCPUs). A domain with <code>emulator_quota</code> as any negative
|
|
value indicates that the domain has infinite bandwidth for emulator threads
|
|
(those excluding vCPUs), which means that it is not bandwidth controlled.
|
|
The value should be in range [1000, 18446744073709551] or less than 0. A
|
|
quota with value 0 means no value.
|
|
<span class="since">Only QEMU driver support since 0.10.0</span>
|
|
</dd>
|
|
|
|
<dt><code>iothread_period</code></dt>
|
|
<dd>
|
|
The optional <code>iothread_period</code> element specifies the
|
|
enforcement interval (unit: microseconds) for IOThreads. Within
|
|
<code>iothread_period</code>, each IOThread of the domain will
|
|
not be allowed to consume more than <code>iothread_quota</code>
|
|
worth of runtime. The value should be in range [1000, 1000000].
|
|
An iothread_period with value 0 means no value.
|
|
<span class="since">Only QEMU driver support since 2.1.0</span>
|
|
</dd>
|
|
<dt><code>iothread_quota</code></dt>
|
|
<dd>
|
|
The optional <code>iothread_quota</code> element specifies the maximum
|
|
allowed bandwidth (unit: microseconds) for IOThreads. A domain with
|
|
<code>iothread_quota</code> as any negative value indicates that the
|
|
domain IOThreads have infinite bandwidth, which means that it is
|
|
not bandwidth controlled. The value should be in range
|
|
[1000, 18446744073709551] or less than 0. An <code>iothread_quota</code>
|
|
with value 0 means no value. You can use this feature to ensure that
|
|
all IOThreads run at the same speed.
|
|
<span class="since">Only QEMU driver support since 2.1.0</span>
|
|
</dd>
|
|
|
|
<dt><code>vcpusched</code>, <code>iothreadsched</code>
|
|
and <code>emulatorsched</code></dt>
|
|
<dd>
|
|
The optional
|
|
<code>vcpusched</code>, <code>iothreadsched</code>
|
|
and <code>emulatorsched</code> elements specify the scheduler type
|
|
(values <code>batch</code>, <code>idle</code>, <code>fifo</code>,
|
|
<code>rr</code>) for particular vCPU, IOThread and emulator threads
|
|
respecively. For <code>vcpusched</code> and <code>iothreadsched</code>
|
|
the attributes <code>vcpus</code> and <code>iothreads</code> select
|
|
which vCPUs/IOThreads this setting applies to, leaving them out sets the
|
|
default. The element <code>emulatorsched</code> does not have that
|
|
attribute. Valid <code>vcpus</code> values start at 0 through one less
|
|
than the number of vCPU's defined for the
|
|
domain. Valid <code>iothreads</code> values are described in
|
|
the <code>iothreadids</code>
|
|
<a href="#elementsIOThreadsAllocation"><code>description</code></a>.
|
|
If no <code>iothreadids</code> are defined, then libvirt numbers
|
|
IOThreads from 1 to the number of <code>iothreads</code> available
|
|
for the domain. For real-time schedulers (<code>fifo</code>,
|
|
<code>rr</code>), priority must be specified as
|
|
well (and is ignored for non-real-time ones). The value range
|
|
for the priority depends on the host kernel (usually 1-99).
|
|
<span class="since">Since 1.2.13</span>
|
|
<code>emulatorsched</code> <span class="since">since 5.3.0</span>
|
|
</dd>
|
|
|
|
<dt><code>cachetune</code><span class="since">Since 4.1.0</span></dt>
|
|
<dd>
|
|
Optional <code>cachetune</code> element can control allocations for CPU
|
|
caches using the resctrl on the host. Whether or not is this supported
|
|
can be gathered from capabilities where some limitations like minimum
|
|
size and required granularity are reported as well. The required
|
|
attribute <code>vcpus</code> specifies to which vCPUs this allocation
|
|
applies. A vCPU can only be member of one <code>cachetune</code> element
|
|
allocation. The vCPUs specified by cachetune can be identical with those
|
|
in memorytune, however they are not allowed to overlap.
|
|
Supported subelements are:
|
|
<dl>
|
|
<dt><code>cache</code></dt>
|
|
<dd>
|
|
This optional element controls the allocation of CPU cache and has
|
|
the following attributes:
|
|
<dl>
|
|
<dt><code>level</code></dt>
|
|
<dd>
|
|
Host cache level from which to allocate.
|
|
</dd>
|
|
<dt><code>id</code></dt>
|
|
<dd>
|
|
Host cache id from which to allocate.
|
|
</dd>
|
|
<dt><code>type</code></dt>
|
|
<dd>
|
|
Type of allocation. Can be <code>code</code> for code
|
|
(instructions), <code>data</code> for data or <code>both</code>
|
|
for both code and data (unified). Currently the allocation can
|
|
be done only with the same type as the host supports, meaning
|
|
you cannot request <code>both</code> for host with CDP
|
|
(code/data prioritization) enabled.
|
|
</dd>
|
|
<dt><code>size</code></dt>
|
|
<dd>
|
|
The size of the region to allocate. The value by default is in
|
|
bytes, but the <code>unit</code> attribute can be used to scale
|
|
the value.
|
|
</dd>
|
|
<dt><code>unit</code> (optional)</dt>
|
|
<dd>
|
|
If specified it is the unit such as KiB, MiB, GiB, or TiB
|
|
(described in the <code>memory</code> element
|
|
for <a href="#elementsMemoryAllocation">Memory Allocation</a>)
|
|
in which <code>size</code> is specified, defaults to bytes.
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>monitor</code><span class="since">Since 4.10.0</span></dt>
|
|
<dd>
|
|
The optional element <code>monitor</code> creates the cache
|
|
monitor(s) for current cache allocation and has the following
|
|
required attributes:
|
|
<dl>
|
|
<dt><code>level</code></dt>
|
|
<dd>
|
|
Host cache level the monitor belongs to.
|
|
</dd>
|
|
<dt><code>vcpus</code></dt>
|
|
<dd>
|
|
vCPU list the monitor applies to. A monitor's vCPU list
|
|
can only be the member(s) of the vCPU list of the associated
|
|
allocation. The default monitor has the same vCPU list as the
|
|
associated allocation. For non-default monitors, overlapping
|
|
vCPUs are not permitted.
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
|
|
<dt><code>memorytune</code><span class="since">Since 4.7.0</span></dt>
|
|
<dd>
|
|
Optional <code>memorytune</code> element can control allocations for
|
|
memory bandwidth using the resctrl on the host. Whether or not is this
|
|
supported can be gathered from capabilities where some limitations like
|
|
minimum bandwidth and required granularity are reported as well. The
|
|
required attribute <code>vcpus</code> specifies to which vCPUs this
|
|
allocation applies. A vCPU can only be member of one
|
|
<code>memorytune</code> element allocation. The <code>vcpus</code> specified
|
|
by <code>memorytune</code> can be identical to those specified by
|
|
<code>cachetune</code>. However they are not allowed to overlap each other.
|
|
Supported subelements are:
|
|
<dl>
|
|
<dt><code>node</code></dt>
|
|
<dd>
|
|
This element controls the allocation of CPU memory bandwidth and has the
|
|
following attributes:
|
|
<dl>
|
|
<dt><code>id</code></dt>
|
|
<dd>
|
|
Host node id from which to allocate memory bandwidth.
|
|
</dd>
|
|
<dt><code>bandwidth</code></dt>
|
|
<dd>
|
|
The memory bandwidth to allocate from this node. The value by default
|
|
is in percentage.
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
|
|
|
|
<h3><a id="elementsMemoryAllocation">Memory Allocation</a></h3>
|
|
|
|
<pre>
|
|
<domain>
|
|
...
|
|
<maxMemory slots='16' unit='KiB'>1524288</maxMemory>
|
|
<memory unit='KiB'>524288</memory>
|
|
<currentMemory unit='KiB'>524288</currentMemory>
|
|
...
|
|
</domain>
|
|
</pre>
|
|
|
|
<dl>
|
|
<dt><code>memory</code></dt>
|
|
<dd>The maximum allocation of memory for the guest at boot time. The
|
|
memory allocation includes possible additional memory devices specified
|
|
at start or hotplugged later.
|
|
The units for this value are determined by the optional
|
|
attribute <code>unit</code>, which defaults to "KiB"
|
|
(kibibytes, 2<sup>10</sup> or blocks of 1024 bytes). Valid
|
|
units are "b" or "bytes" for bytes, "KB" for kilobytes
|
|
(10<sup>3</sup> or 1,000 bytes), "k" or "KiB" for kibibytes
|
|
(1024 bytes), "MB" for megabytes (10<sup>6</sup> or 1,000,000
|
|
bytes), "M" or "MiB" for mebibytes (2<sup>20</sup> or
|
|
1,048,576 bytes), "GB" for gigabytes (10<sup>9</sup> or
|
|
1,000,000,000 bytes), "G" or "GiB" for gibibytes
|
|
(2<sup>30</sup> or 1,073,741,824 bytes), "TB" for terabytes
|
|
(10<sup>12</sup> or 1,000,000,000,000 bytes), or "T" or "TiB"
|
|
for tebibytes (2<sup>40</sup> or 1,099,511,627,776 bytes).
|
|
However, the value will be rounded up to the nearest kibibyte
|
|
by libvirt, and may be further rounded to the granularity
|
|
supported by the hypervisor. Some hypervisors also enforce a
|
|
minimum, such as 4000KiB.
|
|
|
|
In case <a href="#elementsCPU">NUMA</a> is configured for the guest the
|
|
<code>memory</code> element can be omitted.
|
|
|
|
In the case of crash, optional attribute <code>dumpCore</code>
|
|
can be used to control whether the guest memory should be
|
|
included in the generated coredump or not (values "on", "off").
|
|
|
|
<span class='since'><code>unit</code> since 0.9.11</span>,
|
|
<span class='since'><code>dumpCore</code> since 0.10.2
|
|
(QEMU only)</span></dd>
|
|
<dt><code>maxMemory</code></dt>
|
|
<dd>The run time maximum memory allocation of the guest. The initial
|
|
memory specified by either the <code><memory></code> element or
|
|
the NUMA cell size configuration can be increased by hot-plugging of
|
|
memory to the limit specified by this element.
|
|
|
|
The <code>unit</code> attribute behaves the same as for
|
|
<code><memory></code>.
|
|
|
|
The <code>slots</code> attribute specifies the number of slots
|
|
available for adding memory to the guest. The bounds are hypervisor
|
|
specific.
|
|
|
|
Note that due to alignment of the memory chunks added via memory
|
|
hotplug the full size allocation specified by this element may be
|
|
impossible to achieve.
|
|
<span class='since'>Since 1.2.14 supported by the QEMU driver.</span>
|
|
</dd>
|
|
|
|
<dt><code>currentMemory</code></dt>
|
|
<dd>The actual allocation of memory for the guest. This value can
|
|
be less than the maximum allocation, to allow for ballooning
|
|
up the guests memory on the fly. If this is omitted, it defaults
|
|
to the same value as the <code>memory</code> element.
|
|
The <code>unit</code> attribute behaves the same as
|
|
for <code>memory</code>.</dd>
|
|
</dl>
|
|
|
|
|
|
<h3><a id="elementsMemoryBacking">Memory Backing</a></h3>
|
|
|
|
<pre>
|
|
<domain>
|
|
...
|
|
<memoryBacking>
|
|
<hugepages>
|
|
<page size="1" unit="G" nodeset="0-3,5"/>
|
|
<page size="2" unit="M" nodeset="4"/>
|
|
</hugepages>
|
|
<nosharepages/>
|
|
<locked/>
|
|
<source type="file|anonymous|memfd"/>
|
|
<access mode="shared|private"/>
|
|
<allocation mode="immediate|ondemand"/>
|
|
<discard/>
|
|
</memoryBacking>
|
|
...
|
|
</domain>
|
|
</pre>
|
|
|
|
<p>The optional <code>memoryBacking</code> element may contain several
|
|
elements that influence how virtual memory pages are backed by host
|
|
pages.</p>
|
|
|
|
<dl>
|
|
<dt><code>hugepages</code></dt>
|
|
<dd>This tells the hypervisor that the guest should have its memory
|
|
allocated using hugepages instead of the normal native page size.
|
|
<span class='since'>Since 1.2.5</span> it's possible to set hugepages
|
|
more specifically per numa node. The <code>page</code> element is
|
|
introduced. It has one compulsory attribute <code>size</code> which
|
|
specifies which hugepages should be used (especially useful on systems
|
|
supporting hugepages of different sizes). The default unit for the
|
|
<code>size</code> attribute is kilobytes (multiplier of 1024). If you
|
|
want to use different unit, use optional <code>unit</code> attribute.
|
|
For systems with NUMA, the optional <code>nodeset</code> attribute may
|
|
come handy as it ties given guest's NUMA nodes to certain hugepage
|
|
sizes. From the example snippet, one gigabyte hugepages are used for
|
|
every NUMA node except node number four. For the correct syntax see
|
|
<a href="#elementsNUMATuning">this</a>.</dd>
|
|
<dt><code>nosharepages</code></dt>
|
|
<dd>Instructs hypervisor to disable shared pages (memory merge, KSM) for
|
|
this domain. <span class="since">Since 1.0.6</span></dd>
|
|
<dt><code>locked</code></dt>
|
|
<dd>When set and supported by the hypervisor, memory pages belonging
|
|
to the domain will be locked in host's memory and the host will not
|
|
be allowed to swap them out, which might be required for some
|
|
workloads such as real-time. For QEMU/KVM guests, the memory used by
|
|
the QEMU process itself will be locked too: unlike guest memory, this
|
|
is an amount libvirt has no way of figuring out in advance, so it has
|
|
to remove the limit on locked memory altogether. Thus, enabling this
|
|
option opens up to a potential security risk: the host will be unable
|
|
to reclaim the locked memory back from the guest when it's running out
|
|
of memory, which means a malicious guest allocating large amounts of
|
|
locked memory could cause a denial-of-service attack on the host.
|
|
Because of this, using this option is discouraged unless your workload
|
|
demands it; even then, it's highly recommended to set a
|
|
<code>hard_limit</code> (see
|
|
<a href="#elementsMemoryTuning">memory tuning</a>) on memory allocation
|
|
suitable for the specific environment at the same time to mitigate
|
|
the risks described above. <span class="since">Since 1.0.6</span></dd>
|
|
<dt><code>source</code></dt>
|
|
<dd>Using the <code>type</code> attribute, it's possible to
|
|
provide "file" to utilize file memorybacking or keep the
|
|
default "anonymous". <span class="since">Since 4.10.0</span>,
|
|
you may choose "memfd" backing. (QEMU/KVM only)</dd>
|
|
<dt><code>access</code></dt>
|
|
<dd>Using the <code>mode</code> attribute, specify if the memory is
|
|
to be "shared" or "private". This can be overridden per numa node by
|
|
<code>memAccess</code>.</dd>
|
|
<dt><code>allocation</code></dt>
|
|
<dd>Using the <code>mode</code> attribute, specify when to allocate
|
|
the memory by supplying either "immediate" or "ondemand".</dd>
|
|
<dt><code>discard</code></dt>
|
|
<dd>When set and supported by hypervisor the memory
|
|
content is discarded just before guest shuts down (or
|
|
when DIMM module is unplugged). Please note that this is
|
|
just an optimization and is not guaranteed to work in
|
|
all cases (e.g. when hypervisor crashes).
|
|
<span class="since">Since 4.4.0</span> (QEMU/KVM only)
|
|
</dd>
|
|
</dl>
|
|
|
|
|
|
<h3><a id="elementsMemoryTuning">Memory Tuning</a></h3>
|
|
|
|
<pre>
|
|
<domain>
|
|
...
|
|
<memtune>
|
|
<hard_limit unit='G'>1</hard_limit>
|
|
<soft_limit unit='M'>128</soft_limit>
|
|
<swap_hard_limit unit='G'>2</swap_hard_limit>
|
|
<min_guarantee unit='bytes'>67108864</min_guarantee>
|
|
</memtune>
|
|
...
|
|
</domain>
|
|
</pre>
|
|
|
|
<dl>
|
|
<dt><code>memtune</code></dt>
|
|
<dd> The optional <code>memtune</code> element provides details
|
|
regarding the memory tunable parameters for the domain. If this is
|
|
omitted, it defaults to the OS provided defaults. For QEMU/KVM, the
|
|
parameters are applied to the QEMU process as a whole. Thus, when
|
|
counting them, one needs to add up guest RAM, guest video RAM, and
|
|
some memory overhead of QEMU itself. The last piece is hard to
|
|
determine so one needs guess and try. For each tunable, it
|
|
is possible to designate which unit the number is in on
|
|
input, using the same values as
|
|
for <code><memory></code>. For backwards
|
|
compatibility, output is always in
|
|
KiB. <span class='since'><code>unit</code>
|
|
since 0.9.11</span>
|
|
Possible values for all *_limit parameters are in range from 0 to
|
|
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED.</dd>
|
|
<dt><code>hard_limit</code></dt>
|
|
<dd> The optional <code>hard_limit</code> element is the maximum memory
|
|
the guest can use. The units for this value are kibibytes (i.e. blocks
|
|
of 1024 bytes). Users of QEMU and KVM are strongly advised not to set
|
|
this limit as domain may get killed by the kernel if the guess is too
|
|
low, and determining the memory needed for a process to run is an
|
|
<a href="http://en.wikipedia.org/wiki/Undecidable_problem">
|
|
undecidable problem</a>; that said, if you already set
|
|
<code>locked</code> in
|
|
<a href="#elementsMemoryBacking">memory backing</a> because your
|
|
workload demands it, you'll have to take into account the specifics of
|
|
your deployment and figure out a value for <code>hard_limit</code> that
|
|
is large enough to support the memory requirements of your guest, but
|
|
small enough to protect your host against a malicious guest locking all
|
|
memory.</dd>
|
|
<dt><code>soft_limit</code></dt>
|
|
<dd> The optional <code>soft_limit</code> element is the memory limit to
|
|
enforce during memory contention. The units for this value are
|
|
kibibytes (i.e. blocks of 1024 bytes)</dd>
|
|
<dt><code>swap_hard_limit</code></dt>
|
|
<dd> The optional <code>swap_hard_limit</code> element is the maximum
|
|
memory plus swap the guest can use. The units for this value are
|
|
kibibytes (i.e. blocks of 1024 bytes). This has to be more than
|
|
hard_limit value provided</dd>
|
|
<dt><code>min_guarantee</code></dt>
|
|
<dd> The optional <code>min_guarantee</code> element is the guaranteed
|
|
minimum memory allocation for the guest. The units for this value are
|
|
kibibytes (i.e. blocks of 1024 bytes). This element is only supported
|
|
by VMware ESX and OpenVZ drivers.</dd>
|
|
</dl>
|
|
|
|
|
|
<h3><a id="elementsNUMATuning">NUMA Node Tuning</a></h3>
|
|
|
|
<pre>
|
|
<domain>
|
|
...
|
|
<numatune>
|
|
<memory mode="strict" nodeset="1-4,^3"/>
|
|
<memnode cellid="0" mode="strict" nodeset="1"/>
|
|
<memnode cellid="2" mode="preferred" nodeset="2"/>
|
|
</numatune>
|
|
...
|
|
</domain>
|
|
</pre>
|
|
|
|
<dl>
|
|
<dt><code>numatune</code></dt>
|
|
<dd>
|
|
The optional <code>numatune</code> element provides details of
|
|
how to tune the performance of a NUMA host via controlling NUMA policy
|
|
for domain process. NB, only supported by QEMU driver.
|
|
<span class='since'>Since 0.9.3</span>
|
|
</dd>
|
|
<dt><code>memory</code></dt>
|
|
<dd>
|
|
The optional <code>memory</code> element specifies how to allocate memory
|
|
for the domain process on a NUMA host. It contains several optional
|
|
attributes. Attribute <code>mode</code> is either 'interleave',
|
|
'strict', or 'preferred', defaults to 'strict'. Attribute
|
|
<code>nodeset</code> specifies the NUMA nodes, using the same syntax as
|
|
attribute <code>cpuset</code> of element <code>vcpu</code>. Attribute
|
|
<code>placement</code> (<span class='since'>since 0.9.12</span>) can be
|
|
used to indicate the memory placement mode for domain process, its value
|
|
can be either "static" or "auto", defaults to <code>placement</code> of
|
|
<code>vcpu</code>, or "static" if <code>nodeset</code> is specified.
|
|
"auto" indicates the domain process will only allocate memory from the
|
|
advisory nodeset returned from querying numad, and the value of attribute
|
|
<code>nodeset</code> will be ignored if it's specified.
|
|
|
|
If <code>placement</code> of <code>vcpu</code> is 'auto', and
|
|
<code>numatune</code> is not specified, a default <code>numatune</code>
|
|
with <code>placement</code> 'auto' and <code>mode</code> 'strict' will
|
|
be added implicitly.
|
|
|
|
<span class='since'>Since 0.9.3</span>
|
|
</dd>
|
|
<dt><code>memnode</code></dt>
|
|
<dd>
|
|
Optional <code>memnode</code> elements can specify memory allocation
|
|
policies per each guest NUMA node. For those nodes having no
|
|
corresponding <code>memnode</code> element, the default from
|
|
element <code>memory</code> will be used. Attribute <code>cellid</code>
|
|
addresses guest NUMA node for which the settings are applied.
|
|
Attributes <code>mode</code> and <code>nodeset</code> have the same
|
|
meaning and syntax as in <code>memory</code> element.
|
|
|
|
This setting is not compatible with automatic placement.
|
|
<span class='since'>QEMU Since 1.2.7</span>
|
|
</dd>
|
|
</dl>
|
|
|
|
|
|
<h3><a id="elementsBlockTuning">Block I/O Tuning</a></h3>
|
|
<pre>
|
|
<domain>
|
|
...
|
|
<blkiotune>
|
|
<weight>800</weight>
|
|
<device>
|
|
<path>/dev/sda</path>
|
|
<weight>1000</weight>
|
|
</device>
|
|
<device>
|
|
<path>/dev/sdb</path>
|
|
<weight>500</weight>
|
|
<read_bytes_sec>10000</read_bytes_sec>
|
|
<write_bytes_sec>10000</write_bytes_sec>
|
|
<read_iops_sec>20000</read_iops_sec>
|
|
<write_iops_sec>20000</write_iops_sec>
|
|
</device>
|
|
</blkiotune>
|
|
...
|
|
</domain>
|
|
</pre>
|
|
|
|
<dl>
|
|
<dt><code>blkiotune</code></dt>
|
|
<dd> The optional <code>blkiotune</code> element provides the ability
|
|
to tune Blkio cgroup tunable parameters for the domain. If this is
|
|
omitted, it defaults to the OS provided
|
|
defaults. <span class="since">Since 0.8.8</span></dd>
|
|
<dt><code>weight</code></dt>
|
|
<dd> The optional <code>weight</code> element is the overall I/O
|
|
weight of the guest. The value should be in the range [100,
|
|
1000]. After kernel 2.6.39, the value could be in the
|
|
range [10, 1000].</dd>
|
|
<dt><code>device</code></dt>
|
|
<dd>The domain may have multiple <code>device</code> elements
|
|
that further tune the weights for each host block device in
|
|
use by the domain. Note that
|
|
multiple <a href="#elementsDisks">guest disks</a> can share a
|
|
single host block device, if they are backed by files within
|
|
the same host file system, which is why this tuning parameter
|
|
is at the global domain level rather than associated with each
|
|
guest disk device (contrast this to
|
|
the <a href="#elementsDisks"><code><iotune></code></a>
|
|
element which can apply to an
|
|
individual <code><disk></code>).
|
|
Each <code>device</code> element has two
|
|
mandatory sub-elements, <code>path</code> describing the
|
|
absolute path of the device, and <code>weight</code> giving
|
|
the relative weight of that device, in the range [100,
|
|
1000]. After kernel 2.6.39, the value could be in the
|
|
range [10, 1000]. <span class="since">Since 0.9.8</span><br/>
|
|
Additionally, the following optional sub-elements can be used:
|
|
<dl>
|
|
<dt><code>read_bytes_sec</code></dt>
|
|
<dd>Read throughput limit in bytes per second.
|
|
<span class="since">Since 1.2.2</span></dd>
|
|
<dt><code>write_bytes_sec</code></dt>
|
|
<dd>Write throughput limit in bytes per second.
|
|
<span class="since">Since 1.2.2</span></dd>
|
|
<dt><code>read_iops_sec</code></dt>
|
|
<dd>Read I/O operations per second limit.
|
|
<span class="since">Since 1.2.2</span></dd>
|
|
<dt><code>write_iops_sec</code></dt>
|
|
<dd>Write I/O operations per second limit.
|
|
<span class="since">Since 1.2.2</span></dd>
|
|
</dl></dd></dl>
|
|
|
|
|
|
<h3><a id="resPartition">Resource partitioning</a></h3>
|
|
|
|
<p>
|
|
Hypervisors may allow for virtual machines to be placed into
|
|
resource partitions, potentially with nesting of said partitions.
|
|
The <code>resource</code> element groups together configuration
|
|
related to resource partitioning. It currently supports a child
|
|
element <code>partition</code> whose content defines the absolute path
|
|
of the resource partition in which to place the domain. If no
|
|
partition is listed, then the domain will be placed in a default
|
|
partition. It is the responsibility of the app/admin to ensure
|
|
that the partition exists prior to starting the guest. Only the
|
|
(hypervisor specific) default partition can be assumed to exist
|
|
by default.
|
|
</p>
|
|
<pre>
|
|
...
|
|
<resource>
|
|
<partition>/virtualmachines/production</partition>
|
|
</resource>
|
|
...
|
|
</pre>
|
|
|
|
<p>
|
|
Resource partitions are currently supported by the QEMU and
|
|
LXC drivers, which map partition paths to cgroups directories,
|
|
in all mounted controllers. <span class="since">Since 1.0.5</span>
|
|
</p>
|
|
|
|
<h3><a id="elementsCPU">CPU model and topology</a></h3>
|
|
|
|
<p>
|
|
Requirements for CPU model, its features and topology can be specified
|
|
using the following collection of elements.
|
|
<span class="since">Since 0.7.5</span>
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<cpu match='exact'>
|
|
<model fallback='allow'>core2duo</model>
|
|
<vendor>Intel</vendor>
|
|
<topology sockets='1' cores='2' threads='1'/>
|
|
<cache level='3' mode='emulate'/>
|
|
<feature policy='disable' name='lahf_lm'/>
|
|
</cpu>
|
|
...</pre>
|
|
|
|
<pre>
|
|
<cpu mode='host-model'>
|
|
<model fallback='forbid'/>
|
|
<topology sockets='1' cores='2' threads='1'/>
|
|
</cpu>
|
|
...</pre>
|
|
|
|
<pre>
|
|
<cpu mode='host-passthrough'>
|
|
<cache mode='passthrough'/>
|
|
<feature policy='disable' name='lahf_lm'/>
|
|
...</pre>
|
|
|
|
<p>
|
|
In case no restrictions need to be put on CPU model and its features, a
|
|
simpler <code>cpu</code> element can be used.
|
|
<span class="since">Since 0.7.6</span>
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<cpu>
|
|
<topology sockets='1' cores='2' threads='1'/>
|
|
</cpu>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>cpu</code></dt>
|
|
<dd>The <code>cpu</code> element is the main container for describing
|
|
guest CPU requirements. Its <code>match</code> attribute specifies how
|
|
strictly the virtual CPU provided to the guest matches these
|
|
requirements. <span class="since">Since 0.7.6</span> the
|
|
<code>match</code> attribute can be omitted if <code>topology</code>
|
|
is the only element within <code>cpu</code>. Possible values for the
|
|
<code>match</code> attribute are:
|
|
|
|
<dl>
|
|
<dt><code>minimum</code></dt>
|
|
<dd>The specified CPU model and features describes the minimum
|
|
requested CPU. A better CPU will be provided to the guest if it
|
|
is possible with the requested hypervisor on the current host.
|
|
This is a constrained <code>host-model</code> mode; the domain
|
|
will not be created if the provided virtual CPU does not meet
|
|
the requirements.</dd>
|
|
|
|
<dt><code>exact</code></dt>
|
|
<dd>The virtual CPU provided to the guest should exactly match the
|
|
specification. If such CPU is not supported, libvirt will refuse
|
|
to start the domain.</dd>
|
|
|
|
<dt><code>strict</code></dt>
|
|
<dd>The domain will not be created unless the host CPU exactly
|
|
matches the specification. This is not very useful in practice
|
|
and should only be used if there is a real reason.</dd>
|
|
</dl>
|
|
|
|
<span class="since">Since 0.8.5</span> the <code>match</code>
|
|
attribute can be omitted and will default to <code>exact</code>.
|
|
|
|
Sometimes the hypervisor is not able to create a virtual CPU exactly
|
|
matching the specification passed by libvirt.
|
|
<span class="since">Since 3.2.0</span>, an optional <code>check</code>
|
|
attribute can be used to request a specific way of checking whether
|
|
the virtual CPU matches the specification. It is usually safe to omit
|
|
this attribute when starting a domain and stick with the default
|
|
value. Once the domain starts, libvirt will automatically change the
|
|
<code>check</code> attribute to the best supported value to ensure the
|
|
virtual CPU does not change when the domain is migrated to another
|
|
host. The following values can be used:
|
|
|
|
<dl>
|
|
<dt><code>none</code></dt>
|
|
<dd>Libvirt does no checking and it is up to the hypervisor to
|
|
refuse to start the domain if it cannot provide the requested CPU.
|
|
With QEMU this means no checking is done at all since the default
|
|
behavior of QEMU is to emit warnings, but start the domain anyway.
|
|
</dd>
|
|
|
|
<dt><code>partial</code></dt>
|
|
<dd>Libvirt will check the guest CPU specification before starting
|
|
a domain, but the rest is left on the hypervisor. It can still
|
|
provide a different virtual CPU.</dd>
|
|
|
|
<dt><code>full</code></dt>
|
|
<dd>The virtual CPU created by the hypervisor will be checked
|
|
against the CPU specification and the domain will not be started
|
|
unless the two CPUs match.</dd>
|
|
</dl>
|
|
|
|
<span class="since">Since 0.9.10</span>, an optional <code>mode</code>
|
|
attribute may be used to make it easier to configure a guest CPU to be
|
|
as close to host CPU as possible. Possible values for the
|
|
<code>mode</code> attribute are:
|
|
|
|
<dl>
|
|
<dt><code>custom</code></dt>
|
|
<dd>In this mode, the <code>cpu</code> element describes the CPU
|
|
that should be presented to the guest. This is the default when no
|
|
<code>mode</code> attribute is specified. This mode makes it so that
|
|
a persistent guest will see the same hardware no matter what host
|
|
the guest is booted on.</dd>
|
|
<dt><code>host-model</code></dt>
|
|
<dd>The <code>host-model</code> mode is essentially a shortcut to
|
|
copying host CPU definition from capabilities XML into domain XML.
|
|
Since the CPU definition is copied just before starting a domain,
|
|
exactly the same XML can be used on different hosts while still
|
|
providing the best guest CPU each host supports. The
|
|
<code>match</code> attribute can't be used in this mode. Specifying
|
|
CPU model is not supported either, but <code>model</code>'s
|
|
<code>fallback</code> attribute may still be used. Using the
|
|
<code>feature</code> element, specific flags may be enabled or
|
|
disabled specifically in addition to the host model. This may be
|
|
used to fine tune features that can be emulated.
|
|
<span class="since">(Since 1.1.1)</span>.
|
|
Libvirt does not model every aspect of each CPU so
|
|
the guest CPU will not match the host CPU exactly. On the other
|
|
hand, the ABI provided to the guest is reproducible. During
|
|
migration, complete CPU model definition is transferred to the
|
|
destination host so the migrated guest will see exactly the same CPU
|
|
model for the running instance of the guest, even if the destination
|
|
host contains more capable CPUs or newer kernel; but shutting down and restarting
|
|
the guest may present different hardware to the guest according to
|
|
the capabilities of the new host. Prior to libvirt 3.2.0 and QEMU
|
|
2.9.0 detection of the host CPU model via QEMU is not supported.
|
|
Thus the CPU configuration created using <code>host-model</code>
|
|
may not work as expected.
|
|
<span class="since">Since 3.2.0 and QEMU 2.9.0</span> this mode
|
|
works the way it was designed and it is indicated by the
|
|
<code>fallback</code> attribute set to <code>forbid</code> in the
|
|
host-model CPU definition advertised in
|
|
<a href="formatdomaincaps.html#elementsCPU">domain capabilities XML</a>.
|
|
When <code>fallback</code> attribute is set to <code>allow</code>
|
|
in the domain capabilities XML, it is recommended to use
|
|
<code>custom</code> mode with just the CPU model from the host
|
|
capabilities XML. <span class="since">Since 1.2.11</span> PowerISA
|
|
allows processors to run VMs in binary compatibility mode supporting
|
|
an older version of ISA. Libvirt on PowerPC architecture uses the
|
|
<code>host-model</code> to signify a guest mode CPU running in
|
|
binary compatibility mode. Example:
|
|
When a user needs a power7 VM to run in compatibility mode
|
|
on a Power8 host, this can be described in XML as follows :
|
|
<pre>
|
|
<cpu mode='host-model'>
|
|
<model>power7</model>
|
|
</cpu>
|
|
...</pre>
|
|
</dd>
|
|
<dt><code>host-passthrough</code></dt>
|
|
<dd>With this mode, the CPU visible to the guest should be exactly
|
|
the same as the host CPU even in the aspects that libvirt does not
|
|
understand. Though the downside of this mode is that the guest
|
|
environment cannot be reproduced on different hardware. Thus, if you
|
|
hit any bugs, you are on your own. Further details of that CPU can
|
|
be changed using <code>feature</code> elements. Migration of a guest
|
|
using host-passthrough is dangerous if the source and destination hosts
|
|
are not identical in both hardware, QEMU version, microcode version
|
|
and configuration. If such a migration is attempted then the guest may
|
|
hang or crash upon resuming execution on the destination host.</dd>
|
|
</dl>
|
|
|
|
Both <code>host-model</code> and <code>host-passthrough</code> modes
|
|
make sense when a domain can run directly on the host CPUs (for
|
|
example, domains with type <code>kvm</code>). The actual host CPU is
|
|
irrelevant for domains with emulated virtual CPUs (such as domains with
|
|
type <code>qemu</code>). However, for backward compatibility
|
|
<code>host-model</code> may be implemented even for domains running on
|
|
emulated CPUs in which case the best CPU the hypervisor is able to
|
|
emulate may be used rather then trying to mimic the host CPU model.
|
|
</dd>
|
|
|
|
<dt><code>model</code></dt>
|
|
<dd>The content of the <code>model</code> element specifies CPU model
|
|
requested by the guest. The list of available CPU models and their
|
|
definition can be found in <code>cpu_map.xml</code> file installed
|
|
in libvirt's data directory. If a hypervisor is not able to use the
|
|
exact CPU model, libvirt automatically falls back to a closest model
|
|
supported by the hypervisor while maintaining the list of CPU
|
|
features. <span class="since">Since 0.9.10</span>, an optional
|
|
<code>fallback</code> attribute can be used to forbid this behavior,
|
|
in which case an attempt to start a domain requesting an unsupported
|
|
CPU model will fail. Supported values for <code>fallback</code>
|
|
attribute are: <code>allow</code> (this is the default), and
|
|
<code>forbid</code>. The optional <code>vendor_id</code> attribute
|
|
(<span class="since">Since 0.10.0</span>) can be used to set the
|
|
vendor id seen by the guest. It must be exactly 12 characters long.
|
|
If not set the vendor id of the host is used. Typical possible
|
|
values are "AuthenticAMD" and "GenuineIntel".</dd>
|
|
|
|
<dt><code>vendor</code></dt>
|
|
<dd><span class="since">Since 0.8.3</span> the content of the
|
|
<code>vendor</code> element specifies CPU vendor requested by the
|
|
guest. If this element is missing, the guest can be run on a CPU
|
|
matching given features regardless on its vendor. The list of
|
|
supported vendors can be found in <code>cpu_map.xml</code>.</dd>
|
|
|
|
<dt><code>topology</code></dt>
|
|
<dd>The <code>topology</code> element specifies requested topology of
|
|
virtual CPU provided to the guest. Three non-zero values have to be
|
|
given for <code>sockets</code>, <code>cores</code>, and
|
|
<code>threads</code>: total number of CPU sockets, number of cores per
|
|
socket, and number of threads per core, respectively. Hypervisors may
|
|
require that the maximum number of vCPUs specified by the
|
|
<code>cpus</code> element equals to the number of vcpus resulting
|
|
from the topology.</dd>
|
|
|
|
<dt><code>feature</code></dt>
|
|
<dd>The <code>cpu</code> element can contain zero or more
|
|
<code>elements</code> used to fine-tune features provided by the
|
|
selected CPU model. The list of known feature names can be found in
|
|
the same file as CPU models. The meaning of each <code>feature</code>
|
|
element depends on its <code>policy</code> attribute, which has to be
|
|
set to one of the following values:
|
|
|
|
<dl>
|
|
<dt><code>force</code></dt>
|
|
<dd>The virtual CPU will claim the feature is supported regardless
|
|
of it being supported by host CPU.</dd>
|
|
<dt><code>require</code></dt>
|
|
<dd>Guest creation will fail unless the feature is supported by the
|
|
host CPU or the hypervisor is able to emulate it.</dd>
|
|
<dt><code>optional</code></dt>
|
|
<dd>The feature will be supported by virtual CPU if and only if it
|
|
is supported by host CPU.</dd>
|
|
<dt><code>disable</code></dt>
|
|
<dd>The feature will not be supported by virtual CPU.</dd>
|
|
<dt><code>forbid</code></dt>
|
|
<dd>Guest creation will fail if the feature is supported by host
|
|
CPU.</dd>
|
|
</dl>
|
|
|
|
<span class="since">Since 0.8.5</span> the <code>policy</code>
|
|
attribute can be omitted and will default to <code>require</code>.
|
|
|
|
<p> Individual CPU feature names are specified as part of the
|
|
<code>name</code> attribute. For example, to explicitly specify
|
|
the 'pcid' feature with Intel IvyBridge CPU model:
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<cpu match='exact'>
|
|
<model fallback='forbid'>IvyBridge</model>
|
|
<vendor>Intel</vendor>
|
|
<feature policy='require' name='pcid'/>
|
|
</cpu>
|
|
...</pre>
|
|
|
|
</dd>
|
|
|
|
<dt><code>cache</code></dt>
|
|
<dd><span class="since">Since 3.3.0</span> the <code>cache</code>
|
|
element describes the virtual CPU cache. If the element is missing,
|
|
the hypervisor will use a sensible default.
|
|
|
|
<dl>
|
|
<dt><code>level</code></dt>
|
|
<dd>This optional attribute specifies which cache level is described
|
|
by the element. Missing attribute means the element describes all
|
|
CPU cache levels at once. Mixing <code>cache</code> elements with
|
|
the <code>level</code> attribute set and those without the
|
|
attribute is forbidden.</dd>
|
|
|
|
<dt><code>mode</code></dt>
|
|
<dd>
|
|
The following values are supported:
|
|
<dl>
|
|
<dt><code>emulate</code></dt>
|
|
<dd>The hypervisor will provide a fake CPU cache data.</dd>
|
|
|
|
<dt><code>passthrough</code></dt>
|
|
<dd>The real CPU cache data reported by the host CPU will be
|
|
passed through to the virtual CPU.</dd>
|
|
|
|
<dt><code>disable</code></dt>
|
|
<dd>The virtual CPU will report no CPU cache of the specified
|
|
level (or no cache at all if the <code>level</code> attribute
|
|
is missing).</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
Guest NUMA topology can be specified using the <code>numa</code> element.
|
|
<span class="since">Since 0.9.8</span>
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<cpu>
|
|
...
|
|
<numa>
|
|
<cell id='0' cpus='0-3' memory='512000' unit='KiB' discard='yes'/>
|
|
<cell id='1' cpus='4-7' memory='512000' unit='KiB' memAccess='shared'/>
|
|
</numa>
|
|
...
|
|
</cpu>
|
|
...</pre>
|
|
|
|
<p>
|
|
Each <code>cell</code> element specifies a NUMA cell or a NUMA node.
|
|
<code>cpus</code> specifies the CPU or range of CPUs that are
|
|
part of the node. <code>memory</code> specifies the node memory
|
|
in kibibytes (i.e. blocks of 1024 bytes).
|
|
<span class="since">Since 1.2.11</span> one can use an additional <a
|
|
href="#elementsMemoryAllocation"><code>unit</code></a> attribute to
|
|
define units in which <code>memory</code> is specified.
|
|
<span class="since">Since 1.2.7</span> all cells should
|
|
have <code>id</code> attribute in case referring to some cell is
|
|
necessary in the code, otherwise the cells are
|
|
assigned <code>id</code>s in the increasing order starting from
|
|
0. Mixing cells with and without the <code>id</code> attribute
|
|
is not recommended as it may result in unwanted behaviour.
|
|
|
|
<span class='since'>Since 1.2.9</span> the optional attribute
|
|
<code>memAccess</code> can control whether the memory is to be
|
|
mapped as "shared" or "private". This is valid only for
|
|
hugepages-backed memory and nvdimm modules.
|
|
|
|
Each <code>cell</code> element can have an optional
|
|
<code>discard</code> attribute which fine tunes the discard
|
|
feature for given numa node as described under
|
|
<a href="#elementsMemoryBacking">Memory Backing</a>.
|
|
Accepted values are <code>yes</code> and <code>no</code>.
|
|
<span class='since'>Since 4.4.0</span>
|
|
</p>
|
|
|
|
<p>
|
|
This guest NUMA specification is currently available only for
|
|
QEMU/KVM and Xen.
|
|
</p>
|
|
|
|
<p>
|
|
A NUMA hardware architecture supports the notion of distances
|
|
between NUMA cells. <span class="since">Since 3.10.0</span> it
|
|
is possible to define the distance between NUMA cells using the
|
|
<code>distances</code> element within a NUMA <code>cell</code>
|
|
description. The <code>sibling</code> sub-element is used to
|
|
specify the distance value between sibling NUMA cells. For more
|
|
details, see the chapter explaining the system's SLIT (System
|
|
Locality Information Table) within the ACPI (Advanced
|
|
Configuration and Power Interface) specification.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<cpu>
|
|
...
|
|
<numa>
|
|
<cell id='0' cpus='0,4-7' memory='512000' unit='KiB'>
|
|
<distances>
|
|
<sibling id='0' value='10'/>
|
|
<sibling id='1' value='21'/>
|
|
<sibling id='2' value='31'/>
|
|
<sibling id='3' value='41'/>
|
|
</distances>
|
|
</cell>
|
|
<cell id='1' cpus='1,8-10,12-15' memory='512000' unit='KiB' memAccess='shared'>
|
|
<distances>
|
|
<sibling id='0' value='21'/>
|
|
<sibling id='1' value='10'/>
|
|
<sibling id='2' value='21'/>
|
|
<sibling id='3' value='31'/>
|
|
</distances>
|
|
</cell>
|
|
<cell id='2' cpus='2,11' memory='512000' unit='KiB' memAccess='shared'>
|
|
<distances>
|
|
<sibling id='0' value='31'/>
|
|
<sibling id='1' value='21'/>
|
|
<sibling id='2' value='10'/>
|
|
<sibling id='3' value='21'/>
|
|
</distances>
|
|
</cell>
|
|
<cell id='3' cpus='3' memory='512000' unit='KiB'>
|
|
<distances>
|
|
<sibling id='0' value='41'/>
|
|
<sibling id='1' value='31'/>
|
|
<sibling id='2' value='21'/>
|
|
<sibling id='3' value='10'/>
|
|
</distances>
|
|
</cell>
|
|
</numa>
|
|
...
|
|
</cpu>
|
|
...</pre>
|
|
|
|
<p>
|
|
Describing distances between NUMA cells is currently only supported
|
|
by Xen and QEMU. If no <code>distances</code> are given to describe
|
|
the SLIT data between different cells, it will default to a scheme
|
|
using 10 for local and 20 for remote distances.
|
|
</p>
|
|
|
|
<h3><a id="elementsEvents">Events configuration</a></h3>
|
|
|
|
<p>
|
|
It is sometimes necessary to override the default actions taken
|
|
on various events. Not all hypervisors support all events and actions.
|
|
The actions may be taken as a result of calls to libvirt APIs
|
|
<a href="html/libvirt-libvirt-domain.html#virDomainReboot">
|
|
<code>virDomainReboot</code>
|
|
</a>,
|
|
<a href="html/libvirt-libvirt-domain.html#virDomainShutdown">
|
|
<code>virDomainShutdown</code>
|
|
</a>,
|
|
or
|
|
<a href="html/libvirt-libvirt-domain.html#virDomainShutdownFlags">
|
|
<code>virDomainShutdownFlags</code>
|
|
</a>.
|
|
Using <code>virsh reboot</code> or <code>virsh shutdown</code> would
|
|
also trigger the event.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<on_poweroff>destroy</on_poweroff>
|
|
<on_reboot>restart</on_reboot>
|
|
<on_crash>restart</on_crash>
|
|
<on_lockfailure>poweroff</on_lockfailure>
|
|
...</pre>
|
|
|
|
<p>
|
|
The following collections of elements allow the actions to be
|
|
specified when a guest OS triggers a lifecycle operation. A
|
|
common use case is to force a reboot to be treated as a poweroff
|
|
when doing the initial OS installation. This allows the VM to be
|
|
re-configured for the first post-install bootup.
|
|
</p>
|
|
<dl>
|
|
<dt><code>on_poweroff</code></dt>
|
|
<dd>The content of this element specifies the action to take when
|
|
the guest requests a poweroff.</dd>
|
|
<dt><code>on_reboot</code></dt>
|
|
<dd>The content of this element specifies the action to take when
|
|
the guest requests a reboot.</dd>
|
|
<dt><code>on_crash</code></dt>
|
|
<dd>The content of this element specifies the action to take when
|
|
the guest crashes.</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
Each of these states allow for the same four possible actions.
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>destroy</code></dt>
|
|
<dd>The domain will be terminated completely and all resources
|
|
released.</dd>
|
|
<dt><code>restart</code></dt>
|
|
<dd>The domain will be terminated and then restarted with
|
|
the same configuration.</dd>
|
|
<dt><code>preserve</code></dt>
|
|
<dd>The domain will be terminated and its resource preserved
|
|
to allow analysis.</dd>
|
|
<dt><code>rename-restart</code></dt>
|
|
<dd>The domain will be terminated and then restarted with
|
|
a new name.</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
QEMU/KVM supports the <code>on_poweroff</code> and <code>on_reboot</code>
|
|
events handling the <code>destroy</code> and <code>restart</code> actions.
|
|
The <code>preserve</code> action for an <code>on_reboot</code> event
|
|
is treated as a <code>destroy</code> and the <code>rename-restart</code>
|
|
action for an <code>on_poweroff</code> event is treated as a
|
|
<code>restart</code> event.
|
|
</p>
|
|
|
|
<p>
|
|
The <code>on_crash</code> event supports these additional
|
|
actions <span class="since">since 0.8.4</span>.
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>coredump-destroy</code></dt>
|
|
<dd>The crashed domain's core will be dumped, and then the
|
|
domain will be terminated completely and all resources
|
|
released</dd>
|
|
<dt><code>coredump-restart</code></dt>
|
|
<dd>The crashed domain's core will be dumped, and then the
|
|
domain will be restarted with the same configuration</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
<span class="since">Since 3.9.0</span>, the lifecycle events can
|
|
be configured via the
|
|
<a href="html/libvirt-libvirt-domain.html#virDomainSetLifecycleAction">
|
|
<code>virDomainSetLifecycleAction</code></a> API.
|
|
</p>
|
|
|
|
<p>
|
|
The <code>on_lockfailure</code> element (<span class="since">since
|
|
1.0.0</span>) may be used to configure what action should be
|
|
taken when a lock manager loses resource locks. The following
|
|
actions are recognized by libvirt, although not all of them need
|
|
to be supported by individual lock managers. When no action is
|
|
specified, each lock manager will take its default action.
|
|
</p>
|
|
<dl>
|
|
<dt><code>poweroff</code></dt>
|
|
<dd>The domain will be forcefully powered off.</dd>
|
|
<dt><code>restart</code></dt>
|
|
<dd>The domain will be powered off and started up again to
|
|
reacquire its locks.</dd>
|
|
<dt><code>pause</code></dt>
|
|
<dd>The domain will be paused so that it can be manually resumed
|
|
when lock issues are solved.</dd>
|
|
<dt><code>ignore</code></dt>
|
|
<dd>Keep the domain running as if nothing happened.</dd>
|
|
</dl>
|
|
|
|
<h3><a id="elementsPowerManagement">Power Management</a></h3>
|
|
|
|
<p>
|
|
<span class="since">Since 0.10.2</span> it is possible to
|
|
forcibly enable or disable BIOS advertisements to the guest
|
|
OS. (NB: Only qemu driver support)
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<pm>
|
|
<suspend-to-disk enabled='no'/>
|
|
<suspend-to-mem enabled='yes'/>
|
|
</pm>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>pm</code></dt>
|
|
<dd>These elements enable ('yes') or disable ('no') BIOS support
|
|
for S3 (suspend-to-mem) and S4 (suspend-to-disk) ACPI sleep
|
|
states. If nothing is specified, then the hypervisor will be
|
|
left with its default value.<br/>
|
|
Note: This setting cannot prevent the guest OS from performing
|
|
a suspend as the guest OS itself can choose to circumvent the
|
|
unavailability of the sleep states (e.g. S4 by turning off
|
|
completely).</dd>
|
|
</dl>
|
|
|
|
<h3><a id="elementsFeatures">Hypervisor features</a></h3>
|
|
|
|
<p>
|
|
Hypervisors may allow certain CPU / machine features to be
|
|
toggled on/off.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<features>
|
|
<pae/>
|
|
<acpi/>
|
|
<apic/>
|
|
<hap/>
|
|
<privnet/>
|
|
<hyperv>
|
|
<relaxed state='on'/>
|
|
<vapic state='on'/>
|
|
<spinlocks state='on' retries='4096'/>
|
|
<vpindex state='on'/>
|
|
<runtime state='on'/>
|
|
<synic state='on'/>
|
|
<stimer state='on'>
|
|
<direct state='on'/>
|
|
</stimer>
|
|
<reset state='on'/>
|
|
<vendor_id state='on' value='KVM Hv'/>
|
|
<frequencies state='on'/>
|
|
<reenlightenment state='on'/>
|
|
<tlbflush state='on'/>
|
|
<ipi state='on'/>
|
|
<evmcs state='on'/>
|
|
</hyperv>
|
|
<kvm>
|
|
<hidden state='on'/>
|
|
<hint-dedicated state='on'/>
|
|
</kvm>
|
|
<pvspinlock state='on'/>
|
|
<gic version='2'/>
|
|
<ioapic driver='qemu'/>
|
|
<hpt resizing='required'>
|
|
<maxpagesize unit='MiB'>16</maxpagesize>
|
|
</hpt>
|
|
<vmcoreinfo state='on'/>
|
|
<smm state='on'>
|
|
<tseg unit='MiB'>48</tseg>
|
|
</smm>
|
|
<htm state='on'/>
|
|
<msrs unknown='ignore'/>
|
|
</features>
|
|
...</pre>
|
|
|
|
<p>
|
|
All features are listed within the <code>features</code>
|
|
element, omitting a togglable feature tag turns it off.
|
|
The available features can be found by asking
|
|
for the <a href="formatcaps.html">capabilities XML</a> and
|
|
<a href="formatdomaincaps.html">domain capabilities XML</a>,
|
|
but a common set for fully virtualized domains are:
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>pae</code></dt>
|
|
<dd>Physical address extension mode allows 32-bit guests
|
|
to address more than 4 GB of memory.</dd>
|
|
<dt><code>acpi</code></dt>
|
|
<dd>ACPI is useful for power management, for example, with
|
|
KVM guests it is required for graceful shutdown to work.
|
|
</dd>
|
|
<dt><code>apic</code></dt>
|
|
<dd>APIC allows the use of programmable IRQ
|
|
management. <span class="since">Since 0.10.2 (QEMU only)</span> there is
|
|
an optional attribute <code>eoi</code> with values <code>on</code>
|
|
and <code>off</code> which toggles the availability of EOI (End of
|
|
Interrupt) for the guest.
|
|
</dd>
|
|
<dt><code>hap</code></dt>
|
|
<dd>Depending on the <code>state</code> attribute (values <code>on</code>,
|
|
<code>off</code>) enable or disable use of Hardware Assisted Paging.
|
|
The default is <code>on</code> if the hypervisor detects availability
|
|
of Hardware Assisted Paging.
|
|
</dd>
|
|
<dt><code>viridian</code></dt>
|
|
<dd>Enable Viridian hypervisor extensions for paravirtualizing
|
|
guest operating systems
|
|
</dd>
|
|
<dt><code>privnet</code></dt>
|
|
<dd>Always create a private network namespace. This is
|
|
automatically set if any interface devices are defined.
|
|
This feature is only relevant for container based
|
|
virtualization drivers, such as LXC.
|
|
</dd>
|
|
<dt><code>hyperv</code></dt>
|
|
<dd>Enable various features improving behavior of guests
|
|
running Microsoft Windows.
|
|
<table class="top_table">
|
|
<tr>
|
|
<th>Feature</th>
|
|
<th>Description</th>
|
|
<th>Value</th>
|
|
<th>Since</th>
|
|
</tr>
|
|
<tr>
|
|
<td>relaxed</td>
|
|
<td>Relax constraints on timers</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">1.0.0 (QEMU 2.0)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>vapic</td>
|
|
<td>Enable virtual APIC</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">1.1.0 (QEMU 2.0)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>spinlocks</td>
|
|
<td>Enable spinlock support</td>
|
|
<td>on, off; retries - at least 4095</td>
|
|
<td><span class="since">1.1.0 (QEMU 2.0)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>vpindex</td>
|
|
<td>Virtual processor index</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">1.3.3 (QEMU 2.5)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>runtime</td>
|
|
<td>Processor time spent on running guest code and on behalf of guest code</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">1.3.3 (QEMU 2.5)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>synic</td>
|
|
<td>Enable Synthetic Interrupt Controller (SynIC)</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">1.3.3 (QEMU 2.6)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>stimer</td>
|
|
<td>Enable SynIC timers, optionally with Direct Mode support</td>
|
|
<td>on, off; direct - on,off</td>
|
|
<td><span class="since">1.3.3 (QEMU 2.6), direct mode 5.7.0 (QEMU 4.1)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>reset</td>
|
|
<td>Enable hypervisor reset</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">1.3.3 (QEMU 2.5)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>vendor_id</td>
|
|
<td>Set hypervisor vendor id</td>
|
|
<td>on, off; value - string, up to 12 characters</td>
|
|
<td><span class="since">1.3.3 (QEMU 2.5)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>frequencies</td>
|
|
<td>Expose frequency MSRs</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">4.7.0 (QEMU 2.12)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>reenlightenment</td>
|
|
<td>Enable re-enlightenment notification on migration</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">4.7.0 (QEMU 3.0)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>tlbflush</td>
|
|
<td>Enable PV TLB flush support</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">4.7.0 (QEMU 3.0)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>ipi</td>
|
|
<td>Enable PV IPI support</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">4.10.0 (QEMU 3.1)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>evmcs</td>
|
|
<td>Enable Enlightened VMCS</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">4.10.0 (QEMU 3.1)</span></td>
|
|
</tr>
|
|
</table>
|
|
</dd>
|
|
<dt><code>pvspinlock</code></dt>
|
|
<dd>Notify the guest that the host supports paravirtual spinlocks
|
|
for example by exposing the pvticketlocks mechanism. This feature
|
|
can be explicitly disabled by using <code>state='off'</code>
|
|
attribute.
|
|
</dd>
|
|
<dt><code>kvm</code></dt>
|
|
<dd>Various features to change the behavior of the KVM hypervisor.
|
|
<table class="top_table">
|
|
<tr>
|
|
<th>Feature</th>
|
|
<th>Description</th>
|
|
<th>Value</th>
|
|
<th>Since</th>
|
|
</tr>
|
|
<tr>
|
|
<td>hidden</td>
|
|
<td>Hide the KVM hypervisor from standard MSR based discovery</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">1.2.8 (QEMU 2.1.0)</span></td>
|
|
</tr>
|
|
<tr>
|
|
<td>hint-dedicated</td>
|
|
<td>Allows a guest to enable optimizations when running on dedicated vCPUs</td>
|
|
<td>on, off</td>
|
|
<td><span class="since">5.7.0 (QEMU 2.12.1)</span></td>
|
|
</tr>
|
|
</table>
|
|
</dd>
|
|
<dt><code>pmu</code></dt>
|
|
<dd>Depending on the <code>state</code> attribute (values <code>on</code>,
|
|
<code>off</code>, default <code>on</code>) enable or disable the
|
|
performance monitoring unit for the guest.
|
|
<span class="since">Since 1.2.12</span>
|
|
</dd>
|
|
<dt><code>vmport</code></dt>
|
|
<dd>Depending on the <code>state</code> attribute (values <code>on</code>,
|
|
<code>off</code>, default <code>on</code>) enable or disable
|
|
the emulation of VMware IO port, for vmmouse etc.
|
|
<span class="since">Since 1.2.16</span>
|
|
</dd>
|
|
<dt><code>gic</code></dt>
|
|
<dd>Enable for architectures using a General Interrupt
|
|
Controller instead of APIC in order to handle interrupts.
|
|
For example, the 'aarch64' architecture uses
|
|
<code>gic</code> instead of <code>apic</code>. The optional
|
|
attribute <code>version</code> specifies the GIC version;
|
|
however, it may not be supported by all hypervisors. Accepted
|
|
values are <code>2</code>, <code>3</code> and <code>host</code>.
|
|
<span class="since">Since 1.2.16</span>
|
|
</dd>
|
|
<dt><code>smm</code></dt>
|
|
<dd>
|
|
<p>
|
|
Depending on the <code>state</code> attribute (values <code>on</code>,
|
|
<code>off</code>, default <code>on</code>) enable or disable
|
|
System Management Mode.
|
|
<span class="since">Since 2.1.0</span>
|
|
</p><p> Optional sub-element <code>tseg</code> can be used to specify
|
|
the amount of memory dedicated to SMM's extended TSEG. That offers a
|
|
fourth option size apart from the existing ones (1 MiB, 2 MiB and 8
|
|
MiB) that the guest OS (or rather loader) can choose from. The size
|
|
can be specified as a value of that element, optional attribute
|
|
<code>unit</code> can be used to specify the unit of the
|
|
aforementioned value (defaults to 'MiB'). If set to 0 the extended
|
|
size is not advertised and only the default ones (see above) are
|
|
available.
|
|
</p><p>
|
|
<b>If the VM is booting you should leave this option alone, unless you
|
|
are very certain you know what you are doing.</b>
|
|
</p><p>
|
|
This value is configurable due to the fact that the calculation cannot
|
|
be done right with the guarantee that it will work correctly. In
|
|
QEMU, the user-configurable extended TSEG feature was unavailable up
|
|
to and including <code>pc-q35-2.9</code>. Starting with
|
|
<code>pc-q35-2.10</code> the feature is available, with default size
|
|
16 MiB. That should suffice for up to roughly 272 vCPUs, 5 GiB guest
|
|
RAM in total, no hotplug memory range, and 32 GiB of 64-bit PCI MMIO
|
|
aperture. Or for 48 vCPUs, with 1TB of guest RAM, no hotplug DIMM
|
|
range, and 32GB of 64-bit PCI MMIO aperture. The values may also vary
|
|
based on the loader the VM is using.
|
|
</p><p>
|
|
Additional size might be needed for significantly higher vCPU counts
|
|
or increased address space (that can be memory, maxMemory, 64-bit PCI
|
|
MMIO aperture size; roughly 8 MiB of TSEG per 1 TiB of address space)
|
|
which can also be rounded up.
|
|
</p><p>
|
|
Due to the nature of this setting being similar to "how much RAM
|
|
should the guest have" users are advised to either consult the
|
|
documentation of the guest OS or loader (if there is any), or test
|
|
this by trial-and-error changing the value until the VM boots
|
|
successfully. Yet another guiding value for users might be the fact
|
|
that 48 MiB should be enough for pretty large guests (240 vCPUs and
|
|
4TB guest RAM), but it is on purpose not set as default as 48 MiB of
|
|
unavailable RAM might be too much for small guests (e.g. with 512 MiB
|
|
of RAM).
|
|
</p><p>
|
|
See <a href="#elementsMemoryAllocation">Memory Allocation</a>
|
|
for more details about the <code>unit</code> attribute.
|
|
<span class="since">Since 4.5.0</span> (QEMU only)
|
|
</p>
|
|
</dd>
|
|
<dt><code>ioapic</code></dt>
|
|
<dd>Tune the I/O APIC. Possible values for the
|
|
<code>driver</code> attribute are:
|
|
<code>kvm</code> (default for KVM domains)
|
|
and <code>qemu</code> which puts I/O APIC in userspace
|
|
which is also known as a split I/O APIC mode.
|
|
<span class="since">Since 3.4.0</span> (QEMU/KVM only)
|
|
</dd>
|
|
<dt><code>hpt</code></dt>
|
|
<dd>Configure the HPT (Hash Page Table) of a pSeries guest. Possible
|
|
values for the <code>resizing</code> attribute are
|
|
<code>enabled</code>, which causes HPT resizing to be enabled if
|
|
both the guest and the host support it; <code>disabled</code>, which
|
|
causes HPT resizing to be disabled regardless of guest and host
|
|
support; and <code>required</code>, which prevents the guest from
|
|
starting unless both the guest and the host support HPT resizing. If
|
|
the attribute is not defined, the hypervisor default will be used.
|
|
<span class="since">Since 3.10.0</span> (QEMU/KVM only).
|
|
|
|
<p>The optional <code>maxpagesize</code> subelement can be used to
|
|
limit the usable page size for HPT guests. Common values are 64 KiB,
|
|
16 MiB and 16 GiB; when not specified, the hypervisor default will
|
|
be used. <span class="since">Since 4.5.0</span> (QEMU/KVM only).</p>
|
|
</dd>
|
|
<dt><code>vmcoreinfo</code></dt>
|
|
<dd>Enable QEMU vmcoreinfo device to let the guest kernel save debug
|
|
details. <span class="since">Since 4.4.0</span> (QEMU only)
|
|
</dd>
|
|
<dt><code>htm</code></dt>
|
|
<dd>Configure HTM (Hardware Transational Memory) availability for
|
|
pSeries guests. Possible values for the <code>state</code> attribute
|
|
are <code>on</code> and <code>off</code>. If the attribute is not
|
|
defined, the hypervisor default will be used.
|
|
<span class="since">Since 4.6.0</span> (QEMU/KVM only)
|
|
</dd>
|
|
<dt><code>nested-hv</code></dt>
|
|
<dd>Configure nested HV availability for pSeries guests. This needs to
|
|
be enabled from the host (L0) in order to be effective; having HV
|
|
support in the (L1) guest is very desiderable if it's planned to
|
|
run nested (L2) guests inside it, because it will result in those
|
|
nested guests having much better performance than they would when
|
|
using KVM PR or TCG.
|
|
Possible values for the <code>state</code> attribute are
|
|
<code>on</code> and <code>off</code>. If the attribute is not
|
|
defined, the hypervisor default will be used.
|
|
<span class="since">Since 4.10.0</span> (QEMU/KVM only)
|
|
</dd>
|
|
<dt><code>msrs</code></dt>
|
|
<dd>Some guests might require ignoring unknown
|
|
Model Specific Registers (MSRs) reads and writes. It's possible
|
|
to switch this by setting <code>unknown</code> attribute
|
|
of <code>msrs</code> to <code>ignore</code>. If the attribute is
|
|
not defined, or set to <code>fault</code>, unknown reads and writes
|
|
will not be ignored.
|
|
<span class="since">Since 5.1.0</span> (bhyve only)
|
|
</dd>
|
|
</dl>
|
|
|
|
<h3><a id="elementsTime">Time keeping</a></h3>
|
|
|
|
<p>
|
|
The guest clock is typically initialized from the host clock.
|
|
Most operating systems expect the hardware clock to be kept
|
|
in UTC, and this is the default. Windows, however, expects
|
|
it to be in so called 'localtime'.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<clock offset='localtime'>
|
|
<timer name='rtc' tickpolicy='catchup' track='guest'>
|
|
<catchup threshold='123' slew='120' limit='10000'/>
|
|
</timer>
|
|
<timer name='pit' tickpolicy='delay'/>
|
|
</clock>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>clock</code></dt>
|
|
<dd>
|
|
<p>The <code>offset</code> attribute takes four possible
|
|
values, allowing fine grained control over how the guest
|
|
clock is synchronized to the host. NB, not all hypervisors
|
|
support all modes.</p>
|
|
<dl>
|
|
<dt><code>utc</code></dt>
|
|
<dd>
|
|
The guest clock will always be synchronized to UTC when
|
|
booted.
|
|
<span class="since">Since 0.9.11</span> 'utc' mode can be converted
|
|
to 'variable' mode, which can be controlled by using the
|
|
<code>adjustment</code> attribute. If the value is 'reset', the
|
|
conversion is never done (not all hypervisors can
|
|
synchronize to UTC on each boot; use of 'reset' will cause
|
|
an error on those hypervisors). A numeric value
|
|
forces the conversion to 'variable' mode using the value as the
|
|
initial adjustment. The default <code>adjustment</code> is
|
|
hypervisor specific.
|
|
</dd>
|
|
<dt><code>localtime</code></dt>
|
|
<dd>
|
|
The guest clock will be synchronized to the host's configured
|
|
timezone when booted, if any.
|
|
<span class="since">Since 0.9.11,</span> the <code>adjustment</code>
|
|
attribute behaves the same as in 'utc' mode.
|
|
</dd>
|
|
<dt><code>timezone</code></dt>
|
|
<dd>
|
|
The guest clock will be synchronized to the requested timezone
|
|
using the <code>timezone</code> attribute.
|
|
<span class="since">Since 0.7.7</span>
|
|
</dd>
|
|
<dt><code>variable</code></dt>
|
|
<dd>
|
|
The guest clock will have an arbitrary offset applied
|
|
relative to UTC or localtime, depending on the <code>basis</code>
|
|
attribute. The delta relative to UTC (or localtime) is specified
|
|
in seconds, using the <code>adjustment</code> attribute.
|
|
The guest is free to adjust the RTC over time and expect
|
|
that it will be honored at next reboot. This is in
|
|
contrast to 'utc' and 'localtime' mode (with the optional
|
|
attribute adjustment='reset'), where the RTC adjustments are
|
|
lost at each reboot. <span class="since">Since 0.7.7</span>
|
|
<span class="since">Since 0.9.11</span> the <code>basis</code>
|
|
attribute can be either 'utc' (default) or 'localtime'.
|
|
</dd>
|
|
</dl>
|
|
<p>
|
|
A <code>clock</code> may have zero or more
|
|
<code>timer</code> sub-elements. <span class="since">Since
|
|
0.8.0</span>
|
|
</p>
|
|
</dd>
|
|
<dt><code>timer</code></dt>
|
|
<dd>
|
|
<p>
|
|
Each timer element requires a <code>name</code> attribute,
|
|
and has other optional attributes that depend on
|
|
the <code>name</code> specified. Various hypervisors
|
|
support different combinations of attributes.
|
|
</p>
|
|
<dl>
|
|
<dt><code>name</code></dt>
|
|
<dd>
|
|
The <code>name</code> attribute selects which timer is
|
|
being modified, and can be one of
|
|
"platform" (currently unsupported),
|
|
"hpet" (libxl, xen, qemu), "kvmclock" (qemu),
|
|
"pit" (qemu), "rtc" (qemu), "tsc" (libxl, qemu -
|
|
<span class="since">since 3.2.0</span>)
|
|
or "hypervclock"
|
|
(qemu - <span class="since">since 1.2.2</span>).
|
|
|
|
The <code>hypervclock</code> timer adds support for the
|
|
reference time counter and the reference page for iTSC
|
|
feature for guests running the Microsoft Windows
|
|
operating system.
|
|
</dd>
|
|
<dt><code>track</code></dt>
|
|
<dd>
|
|
The <code>track</code> attribute specifies what the timer
|
|
tracks, and can be "boot", "guest", or "wall".
|
|
Only valid for <code>name="rtc"</code>
|
|
or <code>name="platform"</code>.
|
|
</dd>
|
|
<dt><code>tickpolicy</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>tickpolicy</code> attribute determines what
|
|
happens when QEMU misses a deadline for injecting a
|
|
tick to the guest:
|
|
</p>
|
|
<dl>
|
|
<dt><code>delay</code></dt>
|
|
<dd>Continue to deliver ticks at the normal rate.
|
|
The guest time will be delayed due to the late
|
|
tick</dd>
|
|
<dt><code>catchup</code></dt>
|
|
<dd>Deliver ticks at a higher rate to catch up
|
|
with the missed tick. The guest time should
|
|
not be delayed once catchup is complete.</dd>
|
|
<dt><code>merge</code></dt>
|
|
<dd>Merge the missed tick(s) into one tick and
|
|
inject. The guest time may be delayed, depending
|
|
on how the OS reacts to the merging of ticks</dd>
|
|
<dt><code>discard</code></dt>
|
|
<dd>Throw away the missed tick(s) and continue
|
|
with future injection normally. The guest time
|
|
may be delayed, unless the OS has explicit
|
|
handling of lost ticks</dd>
|
|
</dl>
|
|
<p>If the policy is "catchup", there can be further details in
|
|
the <code>catchup</code> sub-element.</p>
|
|
<dl>
|
|
<dt><code>catchup</code></dt>
|
|
<dd>
|
|
The <code>catchup</code> element has three optional
|
|
attributes, each a positive integer. The attributes
|
|
are <code>threshold</code>, <code>slew</code>,
|
|
and <code>limit</code>.
|
|
</dd>
|
|
</dl>
|
|
<p>
|
|
Note that hypervisors are not required to support all policies across all time sources
|
|
</p>
|
|
</dd>
|
|
<dt><code>frequency</code></dt>
|
|
<dd>
|
|
The <code>frequency</code> attribute is an unsigned
|
|
integer specifying the frequency at
|
|
which <code>name="tsc"</code> runs.
|
|
</dd>
|
|
<dt><code>mode</code></dt>
|
|
<dd>
|
|
The <code>mode</code> attribute controls how
|
|
the <code>name="tsc"</code> timer is managed, and can be
|
|
"auto", "native", "emulate", "paravirt", or "smpsafe".
|
|
Other timers are always emulated.
|
|
</dd>
|
|
<dt><code>present</code></dt>
|
|
<dd>
|
|
The <code>present</code> attribute can be "yes" or "no" to
|
|
specify whether a particular timer is available to the guest.
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h3><a id="elementsPerf">Performance monitoring events</a></h3>
|
|
|
|
<p>
|
|
Some platforms allow monitoring of performance of the virtual machine and
|
|
the code executed inside. To enable the performance monitoring events
|
|
you can either specify them in the <code>perf</code> element or enable
|
|
them via <code>virDomainSetPerfEvents</code> API. The performance values
|
|
are then retrieved using the virConnectGetAllDomainStats API.
|
|
<span class="since">Since 2.0.0</span>
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<perf>
|
|
<event name='cmt' enabled='yes'/>
|
|
<event name='mbmt' enabled='no'/>
|
|
<event name='mbml' enabled='yes'/>
|
|
<event name='cpu_cycles' enabled='no'/>
|
|
<event name='instructions' enabled='yes'/>
|
|
<event name='cache_references' enabled='no'/>
|
|
<event name='cache_misses' enabled='no'/>
|
|
<event name='branch_instructions' enabled='no'/>
|
|
<event name='branch_misses' enabled='no'/>
|
|
<event name='bus_cycles' enabled='no'/>
|
|
<event name='stalled_cycles_frontend' enabled='no'/>
|
|
<event name='stalled_cycles_backend' enabled='no'/>
|
|
<event name='ref_cpu_cycles' enabled='no'/>
|
|
<event name='cpu_clock' enabled='no'/>
|
|
<event name='task_clock' enabled='no'/>
|
|
<event name='page_faults' enabled='no'/>
|
|
<event name='context_switches' enabled='no'/>
|
|
<event name='cpu_migrations' enabled='no'/>
|
|
<event name='page_faults_min' enabled='no'/>
|
|
<event name='page_faults_maj' enabled='no'/>
|
|
<event name='alignment_faults' enabled='no'/>
|
|
<event name='emulation_faults' enabled='no'/>
|
|
</perf>
|
|
...
|
|
</pre>
|
|
|
|
<table class="top_table">
|
|
<tr>
|
|
<th>event name</th>
|
|
<th>Description</th>
|
|
<th>stats parameter name</th>
|
|
</tr>
|
|
<tr>
|
|
<td><code>cmt</code></td>
|
|
<td>usage of l3 cache in bytes by applications running on the platform</td>
|
|
<td><code>perf.cmt</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>mbmt</code></td>
|
|
<td>total system bandwidth from one level of cache</td>
|
|
<td><code>perf.mbmt</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>mbml</code></td>
|
|
<td>bandwidth of memory traffic for a memory controller</td>
|
|
<td><code>perf.mbml</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>cpu_cycles</code></td>
|
|
<td>the count of CPU cycles (total/elapsed)</td>
|
|
<td><code>perf.cpu_cycles</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>instructions</code></td>
|
|
<td>the count of instructions by applications running on the platform</td>
|
|
<td><code>perf.instructions</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>cache_references</code></td>
|
|
<td>the count of cache hits by applications running on the platform</td>
|
|
<td><code>perf.cache_references</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>cache_misses</code></td>
|
|
<td>the count of cache misses by applications running on the platform</td>
|
|
<td><code>perf.cache_misses</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>branch_instructions</code></td>
|
|
<td>the count of branch instructions by applications running on the platform</td>
|
|
<td><code>perf.branch_instructions</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>branch_misses</code></td>
|
|
<td>the count of branch misses by applications running on the platform</td>
|
|
<td><code>perf.branch_misses</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>bus_cycles</code></td>
|
|
<td>the count of bus cycles by applications running on the platform</td>
|
|
<td><code>perf.bus_cycles</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>stalled_cycles_frontend</code></td>
|
|
<td>the count of stalled CPU cycles in the frontend of the instruction
|
|
processor pipeline by applications running on the platform</td>
|
|
<td><code>perf.stalled_cycles_frontend</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>stalled_cycles_backend</code></td>
|
|
<td>the count of stalled CPU cycles in the backend of the instruction
|
|
processor pipeline by applications running on the platform</td>
|
|
<td><code>perf.stalled_cycles_backend</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>ref_cpu_cycles</code></td>
|
|
<td>the count of total CPU cycles not affected by CPU frequency scaling
|
|
by applications running on the platform</td>
|
|
<td><code>perf.ref_cpu_cycles</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>cpu_clock</code></td>
|
|
<td>the count of CPU clock time, as measured by a monotonic
|
|
high-resolution per-CPU timer, by applications running on
|
|
the platform</td>
|
|
<td><code>perf.cpu_clock</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>task_clock</code></td>
|
|
<td>the count of task clock time, as measured by a monotonic
|
|
high-resolution CPU timer, specific to the task that
|
|
is run by applications running on the platform</td>
|
|
<td><code>perf.task_clock</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>page_faults</code></td>
|
|
<td>the count of page faults by applications running on the
|
|
platform. This includes minor, major, invalid and other
|
|
types of page faults</td>
|
|
<td><code>perf.page_faults</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>context_switches</code></td>
|
|
<td>the count of context switches by applications running on
|
|
the platform</td>
|
|
<td><code>perf.context_switches</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>cpu_migrations</code></td>
|
|
<td>the count of CPU migrations, that is, where the process
|
|
moved from one logical processor to another, by
|
|
applications running on the platform</td>
|
|
<td><code>perf.cpu_migrations</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>page_faults_min</code></td>
|
|
<td>the count of minor page faults, that is, where the
|
|
page was present in the page cache, and therefore
|
|
the fault avoided loading it from storage, by
|
|
applications running on the platform</td>
|
|
<td><code>perf.page_faults_min</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>page_faults_maj</code></td>
|
|
<td>the count of major page faults, that is, where the
|
|
page was not present in the page cache, and
|
|
therefore had to be fetched from storage, by
|
|
applications running on the platform</td>
|
|
<td><code>perf.page_faults_maj</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>alignment_faults</code></td>
|
|
<td>the count of alignment faults, that is when
|
|
the load or store is not aligned properly, by
|
|
applications running on the platform</td>
|
|
<td><code>perf.alignment_faults</code></td>
|
|
</tr>
|
|
<tr>
|
|
<td><code>emulation_faults</code></td>
|
|
<td>the count of emulation faults, that is when
|
|
the kernel traps on unimplemented instrucions
|
|
and emulates them for user space, by
|
|
applications running on the platform</td>
|
|
<td><code>perf.emulation_faults</code></td>
|
|
</tr>
|
|
</table>
|
|
|
|
<h3><a id="elementsDevices">Devices</a></h3>
|
|
|
|
<p>
|
|
The final set of XML elements are all used to describe devices
|
|
provided to the guest domain. All devices occur as children
|
|
of the main <code>devices</code> element.
|
|
<span class="since">Since 0.1.3</span>
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<emulator>/usr/lib/xen/bin/qemu-dm</emulator>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><a id="elementEmulator"><code>emulator</code></a></dt>
|
|
<dd>
|
|
The contents of the <code>emulator</code> element specify
|
|
the fully qualified path to the device model emulator binary.
|
|
The <a href="formatcaps.html">capabilities XML</a> specifies
|
|
the recommended default emulator to use for each particular
|
|
domain type / architecture combination.
|
|
</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
To help users identifying devices they care about, every
|
|
device can have direct child <code>alias</code> element
|
|
which then has <code>name</code> attribute where users can
|
|
store identifier for the device. The identifier has to have
|
|
"ua-" prefix and must be unique within the domain. Additionally, the
|
|
identifier must consist only of the following characters:
|
|
<code>[a-zA-Z0-9_-]</code>.
|
|
<span class="since">Since 3.9.0</span>
|
|
</p>
|
|
|
|
<pre>
|
|
<devices>
|
|
<disk type='file'>
|
|
<alias name='ua-myDisk'/>
|
|
</disk>
|
|
<interface type='network' trustGuestRxFilters='yes'>
|
|
<alias name='ua-myNIC'/>
|
|
</interface>
|
|
...
|
|
</devices>
|
|
</pre>
|
|
|
|
<h4><a id="elementsDisks">Hard drives, floppy disks, CDROMs</a></h4>
|
|
|
|
<p>
|
|
Any device that looks like a disk, be it a floppy, harddisk,
|
|
cdrom, or paravirtualized driver is specified via the <code>disk</code>
|
|
element.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<disk type='file' snapshot='external'>
|
|
<driver name="tap" type="aio" cache="default"/>
|
|
<source file='/var/lib/xen/images/fv0' startupPolicy='optional'>
|
|
<seclabel relabel='no'/>
|
|
</source>
|
|
<target dev='hda' bus='ide'/>
|
|
<iotune>
|
|
<total_bytes_sec>10000000</total_bytes_sec>
|
|
<read_iops_sec>400000</read_iops_sec>
|
|
<write_iops_sec>100000</write_iops_sec>
|
|
</iotune>
|
|
<boot order='2'/>
|
|
<encryption type='...'>
|
|
...
|
|
</encryption>
|
|
<shareable/>
|
|
<serial>
|
|
...
|
|
</serial>
|
|
</disk>
|
|
...
|
|
<disk type='network'>
|
|
<driver name="qemu" type="raw" io="threads" ioeventfd="on" event_idx="off"/>
|
|
<source protocol="sheepdog" name="image_name">
|
|
<host name="hostname" port="7000"/>
|
|
</source>
|
|
<target dev="hdb" bus="ide"/>
|
|
<boot order='1'/>
|
|
<transient/>
|
|
<address type='drive' controller='0' bus='1' unit='0'/>
|
|
</disk>
|
|
<disk type='network'>
|
|
<driver name="qemu" type="raw"/>
|
|
<source protocol="rbd" name="image_name2">
|
|
<host name="hostname" port="7000"/>
|
|
<snapshot name="snapname"/>
|
|
<config file="/path/to/file"/>
|
|
<auth username='myuser'>
|
|
<secret type='ceph' usage='mypassid'/>
|
|
</auth>
|
|
</source>
|
|
<target dev="hdc" bus="ide"/>
|
|
</disk>
|
|
<disk type='block' device='cdrom'>
|
|
<driver name='qemu' type='raw'/>
|
|
<target dev='hdd' bus='ide' tray='open'/>
|
|
<readonly/>
|
|
</disk>
|
|
<disk type='network' device='cdrom'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source protocol="http" name="url_path">
|
|
<host name="hostname" port="80"/>
|
|
</source>
|
|
<target dev='hde' bus='ide' tray='open'/>
|
|
<readonly/>
|
|
</disk>
|
|
<disk type='network' device='cdrom'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source protocol="https" name="url_path">
|
|
<host name="hostname" port="443"/>
|
|
</source>
|
|
<target dev='hdf' bus='ide' tray='open'/>
|
|
<readonly/>
|
|
</disk>
|
|
<disk type='network' device='cdrom'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source protocol="ftp" name="url_path">
|
|
<host name="hostname" port="21"/>
|
|
</source>
|
|
<target dev='hdg' bus='ide' tray='open'/>
|
|
<readonly/>
|
|
</disk>
|
|
<disk type='network' device='cdrom'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source protocol="ftps" name="url_path">
|
|
<host name="hostname" port="990"/>
|
|
</source>
|
|
<target dev='hdh' bus='ide' tray='open'/>
|
|
<readonly/>
|
|
</disk>
|
|
<disk type='network' device='cdrom'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source protocol="tftp" name="url_path">
|
|
<host name="hostname" port="69"/>
|
|
</source>
|
|
<target dev='hdi' bus='ide' tray='open'/>
|
|
<readonly/>
|
|
</disk>
|
|
<disk type='block' device='lun'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source dev='/dev/sda'>
|
|
<reservations managed='no'>
|
|
<source type='unix' path='/path/to/qemu-pr-helper' mode='client'/>
|
|
</reservations>
|
|
<target dev='sda' bus='scsi'/>
|
|
<address type='drive' controller='0' bus='0' target='3' unit='0'/>
|
|
</disk>
|
|
<disk type='block' device='disk'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source dev='/dev/sda'/>
|
|
<geometry cyls='16383' heads='16' secs='63' trans='lba'/>
|
|
<blockio logical_block_size='512' physical_block_size='4096'/>
|
|
<target dev='hdj' bus='ide'/>
|
|
</disk>
|
|
<disk type='volume' device='disk'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source pool='blk-pool0' volume='blk-pool0-vol0'/>
|
|
<target dev='hdk' bus='ide'/>
|
|
</disk>
|
|
<disk type='network' device='disk'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source protocol='iscsi' name='iqn.2013-07.com.example:iscsi-nopool/2'>
|
|
<host name='example.com' port='3260'/>
|
|
<auth username='myuser'>
|
|
<secret type='iscsi' usage='libvirtiscsi'/>
|
|
</auth>
|
|
</source>
|
|
<target dev='vda' bus='virtio'/>
|
|
</disk>
|
|
<disk type='network' device='lun'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source protocol='iscsi' name='iqn.2013-07.com.example:iscsi-nopool/1'>
|
|
<host name='example.com' port='3260'/>
|
|
<auth username='myuser'>
|
|
<secret type='iscsi' usage='libvirtiscsi'/>
|
|
</auth>
|
|
</source>
|
|
<target dev='sdb' bus='scsi'/>
|
|
</disk>
|
|
<disk type='network' device='lun'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source protocol='iscsi' name='iqn.2013-07.com.example:iscsi-nopool/0'>
|
|
<host name='example.com' port='3260'/>
|
|
<initiator>
|
|
<iqn name='iqn.2013-07.com.example:client'/>
|
|
</initiator>
|
|
</source>
|
|
<target dev='sdb' bus='scsi'/>
|
|
</disk>
|
|
<disk type='volume' device='disk'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source pool='iscsi-pool' volume='unit:0:0:1' mode='host'/>
|
|
<target dev='vdb' bus='virtio'/>
|
|
</disk>
|
|
<disk type='volume' device='disk'>
|
|
<driver name='qemu' type='raw'/>
|
|
<source pool='iscsi-pool' volume='unit:0:0:2' mode='direct'/>
|
|
<target dev='vdc' bus='virtio'/>
|
|
</disk>
|
|
<disk type='file' device='disk'>
|
|
<driver name='qemu' type='qcow2' queues='4'/>
|
|
<source file='/var/lib/libvirt/images/domain.qcow'/>
|
|
<backingStore type='file'>
|
|
<format type='qcow2'/>
|
|
<source file='/var/lib/libvirt/images/snapshot.qcow'/>
|
|
<backingStore type='block'>
|
|
<format type='raw'/>
|
|
<source dev='/dev/mapper/base'/>
|
|
<backingStore/>
|
|
</backingStore>
|
|
</backingStore>
|
|
<target dev='vdd' bus='virtio'/>
|
|
</disk>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>disk</code></dt>
|
|
<dd>The <code>disk</code> element is the main container for
|
|
describing disks and supports the following attributes:
|
|
<dl>
|
|
<dt><code>type</code></dt>
|
|
<dd>
|
|
Valid values are "file", "block",
|
|
"dir" (<span class="since">since 0.7.5</span>),
|
|
"network" (<span class="since">since 0.8.7</span>), or
|
|
"volume" (<span class="since">since 1.0.5</span>)
|
|
and refer to the underlying source for the disk.
|
|
<span class="since">Since 0.0.3</span>
|
|
</dd>
|
|
<dt><code>device</code></dt>
|
|
<dd>
|
|
Indicates how the disk is to be exposed to the guest OS. Possible
|
|
values for this attribute are "floppy", "disk", "cdrom", and "lun",
|
|
defaulting to "disk".
|
|
<p>
|
|
Using "lun" (<span class="since">since 0.9.10</span>) is only
|
|
valid when the <code>type</code> is "block" or "network" for
|
|
<code>protocol='iscsi'</code> or when the <code>type</code>
|
|
is "volume" when using an iSCSI source <code>pool</code>
|
|
for <code>mode</code> "host" or as an
|
|
<a href="http://wiki.libvirt.org/page/NPIV_in_libvirt">NPIV</a>
|
|
virtual Host Bus Adapter (vHBA) using a Fibre Channel storage pool.
|
|
Configured in this manner, the LUN behaves identically to "disk",
|
|
except that generic SCSI commands from the guest are accepted
|
|
and passed through to the physical device. Also note that
|
|
device='lun' will only be recognized for actual raw devices,
|
|
but never for individual partitions or LVM partitions (in those
|
|
cases, the kernel will reject the generic SCSI commands, making
|
|
it identical to device='disk').
|
|
<span class="since">Since 0.1.4</span>
|
|
</p>
|
|
</dd>
|
|
<dt><code>model</code></dt>
|
|
<dd>
|
|
Indicates the emulated device model of the disk. Typically
|
|
this is indicated solely by the <code>bus</code> property but
|
|
for <code>bus</code> "virtio" the model can be specified further
|
|
with "virtio-transitional", "virtio-non-transitional", or
|
|
"virtio". See
|
|
<a href="#elementsVirtioTransitional">Virtio transitional devices</a>
|
|
for more details.
|
|
<span class="since">Since 5.2.0</span>
|
|
</dd>
|
|
<dt><code>rawio</code></dt>
|
|
<dd>
|
|
Indicates whether the disk needs rawio capability. Valid
|
|
settings are "yes" or "no" (default is "no"). If any one disk
|
|
in a domain has rawio='yes', rawio capability will be enabled
|
|
for all disks in the domain (because, in the case of QEMU, this
|
|
capability can only be set on a per-process basis). This attribute
|
|
is only valid when device is "lun". NB, <code>rawio</code> intends
|
|
to confine the capability per-device, however, current QEMU
|
|
implementation gives the domain process broader capability
|
|
than that (per-process basis, affects all the domain disks).
|
|
To confine the capability as much as possible for QEMU driver
|
|
as this stage, <code>sgio</code> is recommended, it's more
|
|
secure than <code>rawio</code>.
|
|
<span class="since">Since 0.9.10</span>
|
|
</dd>
|
|
<dt><code>sgio</code></dt>
|
|
<dd>
|
|
If supported by the hypervisor and OS, indicates whether
|
|
unprivileged SG_IO commands are filtered for the disk. Valid
|
|
settings are "filtered" or "unfiltered" where the default is
|
|
"filtered". Only available when the <code>device</code> is 'lun'.
|
|
<span class="since">Since 1.0.2</span>
|
|
</dd>
|
|
<dt><code>snapshot</code></dt>
|
|
<dd>
|
|
Indicates the default behavior of the disk during disk snapshots:
|
|
"<code>internal</code>" requires a file format such as qcow2 that
|
|
can store both the snapshot and the data changes since the snapshot;
|
|
"<code>external</code>" will separate the snapshot from the live
|
|
data; and "<code>no</code>" means the disk will not participate in
|
|
snapshots. Read-only disks default to "<code>no</code>", while the
|
|
default for other disks depends on the hypervisor's capabilities.
|
|
Some hypervisors allow a per-snapshot choice as well, during
|
|
<a href="formatsnapshot.html">domain snapshot creation</a>.
|
|
Not all snapshot modes are supported; for example, enabling
|
|
snapshots with a transient disk generally does not make sense.
|
|
<span class="since">Since 0.9.5</span>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>source</code></dt>
|
|
<dd>Representation of the disk <code>source</code> depends on the
|
|
disk <code>type</code> attribute value as follows:
|
|
<dl>
|
|
<dt><code>file</code></dt>
|
|
<dd>
|
|
The <code>file</code> attribute specifies the fully-qualified
|
|
path to the file holding the disk.
|
|
<span class="since">Since 0.0.3</span>
|
|
</dd>
|
|
<dt><code>block</code></dt>
|
|
<dd>
|
|
The <code>dev</code> attribute specifies the fully-qualified path
|
|
to the host device to serve as the disk.
|
|
<span class="since">Since 0.0.3</span>
|
|
</dd>
|
|
<dt><code>dir</code></dt>
|
|
<dd>
|
|
The <code>dir</code> attribute specifies the fully-qualified path
|
|
to the directory to use as the disk.
|
|
<span class="since">Since 0.7.5</span>
|
|
</dd>
|
|
<dt><code>network</code></dt>
|
|
<dd>
|
|
The <code>protocol</code> attribute specifies the protocol to
|
|
access to the requested image. Possible values are "nbd",
|
|
"iscsi", "rbd", "sheepdog", "gluster" or "vxhs".
|
|
|
|
<p>If the <code>protocol</code> attribute is "rbd", "sheepdog",
|
|
"gluster", or "vxhs", an additional attribute <code>name</code>
|
|
is mandatory to specify which volume/image will be used.
|
|
</p>
|
|
|
|
<p>For "nbd", the <code>name</code> attribute is optional. TLS
|
|
transport for NBD can be enabled by setting the <code>tls</code>
|
|
attribute to <code>yes</code>. For the QEMU hypervisor, usage of
|
|
a TLS environment can also be globally controlled on the host by
|
|
the <code>nbd_tls</code> and <code>nbd_tls_x509_cert_dir</code> in
|
|
/etc/libvirt/qemu.conf.
|
|
('tls' <span class="since">Since 4.5.0</span>)
|
|
</p>
|
|
|
|
<p>For "iscsi" (<span class="since">since 1.0.4</span>), the
|
|
<code>name</code> attribute may include a logical unit number,
|
|
separated from the target's name by a slash (e.g.,
|
|
<code>iqn.2013-07.com.example:iscsi-pool/1</code>). If not
|
|
specified, the default LUN is zero.
|
|
</p>
|
|
|
|
<p>For "vxhs" (<span class="since">since 3.8.0</span>), the
|
|
<code>name</code> is the UUID of the volume, assigned by the
|
|
HyperScale server. Additionally, an optional attribute
|
|
<code>tls</code> (QEMU only) can be used to control whether a
|
|
VxHS block device would utilize a hypervisor configured TLS
|
|
X.509 certificate environment in order to encrypt the data
|
|
channel. For the QEMU hypervisor, usage of a TLS environment can
|
|
also be globally controlled on the host by the
|
|
<code>vxhs_tls</code> and <code>vxhs_tls_x509_cert_dir</code> or
|
|
<code>default_tls_x509_cert_dir</code> settings in the file
|
|
/etc/libvirt/qemu.conf. If <code>vxhs_tls</code> is enabled,
|
|
then unless the domain <code>tls</code> attribute is set to "no",
|
|
libvirt will use the host configured TLS environment. If the
|
|
<code>tls</code> attribute is set to "yes", then regardless of
|
|
the qemu.conf setting, TLS authentication will be attempted.
|
|
</p>
|
|
<span class="since">Since 0.8.7</span>
|
|
</dd>
|
|
<dt><code>volume</code></dt>
|
|
<dd>
|
|
The underlying disk source is represented by attributes
|
|
<code>pool</code> and <code>volume</code>. Attribute
|
|
<code>pool</code> specifies the name of the
|
|
<a href="formatstorage.html">storage pool</a> (managed
|
|
by libvirt) where the disk source resides. Attribute
|
|
<code>volume</code> specifies the name of storage volume (managed
|
|
by libvirt) used as the disk source. The value for the
|
|
<code>volume</code> attribute will be the output from the "Name"
|
|
column of a <code>virsh vol-list [pool-name]</code> command.
|
|
<p>
|
|
Use the attribute <code>mode</code>
|
|
(<span class="since">since 1.1.1</span>) to indicate how to
|
|
represent the LUN as the disk source. Valid values are
|
|
"direct" and "host". If <code>mode</code> is not specified,
|
|
the default is to use "host".
|
|
|
|
Using "direct" as the <code>mode</code> value indicates to use
|
|
the <a href="formatstorage.html">storage pool's</a>
|
|
<code>source</code> element <code>host</code> attribute as
|
|
the disk source to generate the libiscsi URI (e.g.
|
|
'file=iscsi://example.com:3260/iqn.2013-07.com.example:iscsi-pool/1').
|
|
|
|
Using "host" as the <code>mode</code> value indicates to use the
|
|
LUN's path as it shows up on host (e.g.
|
|
'file=/dev/disk/by-path/ip-example.com:3260-iscsi-iqn.2013-07.com.example:iscsi-pool-lun-1').
|
|
|
|
Using a LUN from an iSCSI source pool provides the same
|
|
features as a <code>disk</code> configured using
|
|
<code>type</code> 'block' or 'network' and <code>device</code>
|
|
of 'lun' with respect to how the LUN is presented to and
|
|
may be used by the guest.
|
|
|
|
<span class="since">Since 1.0.5</span>
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
With "file", "block", and "volume", one or more optional
|
|
sub-elements <code>seclabel</code>, <a href="#seclabel">described
|
|
below</a> (and <span class="since">since 0.9.9</span>), can be
|
|
used to override the domain security labeling policy for just
|
|
that source file. (NB, for "volume" type disk, <code>seclabel</code>
|
|
is only valid when the specified storage volume is of 'file' or
|
|
'block' type).
|
|
<p>
|
|
The <code>source</code> element may also have the <code>index</code>
|
|
attribute with same semantics the <a href='#elementsDiskBackingStoreIndex'>
|
|
<code>index</code></a> attribute of <code>backingStore</code>
|
|
</p>
|
|
<p>
|
|
The <code>source</code> element may contain the following sub elements:
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>host</code></dt>
|
|
<dd>
|
|
<p>
|
|
When the disk <code>type</code> is "network", the <code>source</code>
|
|
may have zero or more <code>host</code> sub-elements used to
|
|
specify the hosts to connect.
|
|
|
|
The <code>host</code> element supports 4 attributes, viz. "name",
|
|
"port", "transport" and "socket", which specify the hostname,
|
|
the port number, transport type and path to socket, respectively.
|
|
The meaning of this element and the number of the elements depend
|
|
on the protocol attribute.
|
|
</p>
|
|
<table class="top_table">
|
|
<tr>
|
|
<th> Protocol </th>
|
|
<th> Meaning </th>
|
|
<th> Number of hosts </th>
|
|
<th> Default port </th>
|
|
</tr>
|
|
<tr>
|
|
<td> nbd </td>
|
|
<td> a server running nbd-server </td>
|
|
<td> only one </td>
|
|
<td> 10809 </td>
|
|
</tr>
|
|
<tr>
|
|
<td> iscsi </td>
|
|
<td> an iSCSI server </td>
|
|
<td> only one </td>
|
|
<td> 3260 </td>
|
|
</tr>
|
|
<tr>
|
|
<td> rbd </td>
|
|
<td> monitor servers of RBD </td>
|
|
<td> one or more </td>
|
|
<td> librados default </td>
|
|
</tr>
|
|
<tr>
|
|
<td> sheepdog </td>
|
|
<td> one of the sheepdog servers (default is localhost:7000) </td>
|
|
<td> zero or one </td>
|
|
<td> 7000 </td>
|
|
</tr>
|
|
<tr>
|
|
<td> gluster </td>
|
|
<td> a server running glusterd daemon </td>
|
|
<td> one or more (<span class="since">Since 2.1.0</span>), just one prior to that </td>
|
|
<td> 24007 </td>
|
|
</tr>
|
|
<tr>
|
|
<td> vxhs </td>
|
|
<td> a server running Veritas HyperScale daemon </td>
|
|
<td> only one </td>
|
|
<td> 9999 </td>
|
|
</tr>
|
|
</table>
|
|
<p>
|
|
gluster supports "tcp", "rdma", "unix" as valid values for the
|
|
transport attribute. nbd supports "tcp" and "unix". Others only
|
|
support "tcp". If nothing is specified, "tcp" is assumed. If the
|
|
transport is "unix", the socket attribute specifies the path to an
|
|
AF_UNIX socket.
|
|
</p>
|
|
</dd>
|
|
<dt><code>snapshot</code></dt>
|
|
<dd>
|
|
The <code>name</code> attribute of <code>snapshot</code> element can
|
|
optionally specify an internal snapshot name to be used as the
|
|
source for storage protocols.
|
|
Supported for 'rbd' <span class="since">since 1.2.11 (QEMU only).</span>
|
|
</dd>
|
|
<dt><code>config</code></dt>
|
|
<dd>
|
|
The <code>file</code> attribute for the <code>config</code> element
|
|
provides a fully qualified path to a configuration file to be
|
|
provided as a parameter to the client of a networked storage
|
|
protocol. Supported for 'rbd' <span class="since">since 1.2.11
|
|
(QEMU only).</span>
|
|
</dd>
|
|
<dt><code>auth</code></dt>
|
|
<dd><span class="since">Since libvirt 3.9.0</span>, the
|
|
<code>auth</code> element is supported for a disk
|
|
<code>type</code> "network" that is using a <code>source</code>
|
|
element with the <code>protocol</code> attributes "rbd" or "iscsi".
|
|
If present, the <code>auth</code> element provides the
|
|
authentication credentials needed to access the source. It
|
|
includes a mandatory attribute <code>username</code>, which
|
|
identifies the username to use during authentication, as well
|
|
as a sub-element <code>secret</code> with mandatory
|
|
attribute <code>type</code>, to tie back to
|
|
a <a href="formatsecret.html">libvirt secret object</a> that
|
|
holds the actual password or other credentials (the domain XML
|
|
intentionally does not expose the password, only the reference
|
|
to the object that does manage the password).
|
|
Known secret types are "ceph" for Ceph RBD network sources and
|
|
"iscsi" for CHAP authentication of iSCSI targets.
|
|
Both will require either a <code>uuid</code> attribute
|
|
with the UUID of the secret object or a <code>usage</code>
|
|
attribute matching the key that was specified in the
|
|
secret object.
|
|
</dd>
|
|
<dt><code>encryption</code></dt>
|
|
<dd><span class="since">Since libvirt 3.9.0</span>, the
|
|
<code>encryption</code> can be a sub-element of the
|
|
<code>source</code> element for encrypted storage sources.
|
|
If present, specifies how the storage source is encrypted
|
|
See the
|
|
<a href="formatstorageencryption.html">Storage Encryption</a>
|
|
page for more information.
|
|
<p/>
|
|
Note that the 'qcow' format of encryption is broken and thus is no
|
|
longer supported for use with disk images.
|
|
(<span class="since">Since libvirt 4.5.0</span>)
|
|
</dd>
|
|
<dt><code>reservations</code></dt>
|
|
<dd><span class="since">Since libvirt 4.4.0</span>, the
|
|
<code>reservations</code> can be a sub-element of the
|
|
<code>source</code> element for storage sources (QEMU driver only).
|
|
If present it enables persistent reservations for SCSI
|
|
based disks. The element has one mandatory attribute
|
|
<code>managed</code> with accepted values <code>yes</code> and
|
|
<code>no</code>. If <code>managed</code> is enabled libvirt prepares
|
|
and manages any resources needed. When the persistent reservations
|
|
are unmanaged, then the hypervisor acts as a client and the path to
|
|
the server socket must be provided in the child element
|
|
<code>source</code>, which currently accepts only the following
|
|
attributes:
|
|
<code>type</code> with one value <code>unix</code>,
|
|
<code>path</code> path to the socket, and
|
|
finally <code>mode</code> which accepts one value
|
|
<code>client</code> specifying the role of hypervisor.
|
|
It's recommended to allow libvirt manage the persistent
|
|
reservations.
|
|
</dd>
|
|
<dt><code>initiator</code></dt>
|
|
<dd><span class="since">Since libvirt 4.7.0</span>, the
|
|
<code>initiator</code> element is supported for a disk
|
|
<code>type</code> "network" that is using a <code>source</code>
|
|
element with the <code>protocol</code> attribute "iscsi".
|
|
If present, the <code>initiator</code> element provides the
|
|
initiator IQN needed to access the source via mandatory
|
|
attribute <code>name</code>.
|
|
</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
For a "file" or "volume" disk type which represents a cdrom or floppy
|
|
(the <code>device</code> attribute), it is possible to define
|
|
policy what to do with the disk if the source file is not accessible.
|
|
(NB, <code>startupPolicy</code> is not valid for "volume" disk unless
|
|
the specified storage volume is of "file" type). This is done by the
|
|
<code>startupPolicy</code> attribute
|
|
(<span class="since">since 0.9.7</span>),
|
|
accepting these values:
|
|
</p>
|
|
<table class="top_table">
|
|
<tr>
|
|
<td> mandatory </td>
|
|
<td> fail if missing for any reason (the default) </td>
|
|
</tr>
|
|
<tr>
|
|
<td> requisite </td>
|
|
<td> fail if missing on boot up,
|
|
drop if missing on migrate/restore/revert </td>
|
|
</tr>
|
|
<tr>
|
|
<td> optional </td>
|
|
<td> drop if missing at any start attempt </td>
|
|
</tr>
|
|
</table>
|
|
<p>
|
|
<span class="since">Since 1.1.2</span> the <code>startupPolicy</code>
|
|
is extended to support hard disks besides cdrom and floppy. On guest
|
|
cold bootup, if a certain disk is not accessible or its disk chain is
|
|
broken, with startupPolicy 'optional' the guest will drop this disk.
|
|
This feature doesn't support migration currently.
|
|
</p>
|
|
</dd>
|
|
<dt><code>backingStore</code></dt>
|
|
<dd>
|
|
This element describes the backing store used by the disk
|
|
specified by sibling <code>source</code> element. It is
|
|
currently ignored on input and only used for output to
|
|
describe the detected backing chains of running
|
|
domains <span class="since">since 1.2.4</span> (although a
|
|
future version of libvirt may start accepting chains on input,
|
|
or output information for offline domains). An
|
|
empty <code>backingStore</code> element means the sibling
|
|
source is self-contained and is not based on any backing
|
|
store. For backing chain information to be accurate, the
|
|
backing format must be correctly specified in the metadata of
|
|
each file of the chain (files created by libvirt satisfy this
|
|
property, but using existing external files for snapshot or
|
|
block copy operations requires the end user to pre-create the
|
|
file correctly). The following attributes are
|
|
supported in <code>backingStore</code>:
|
|
<dl>
|
|
<dt><code>type</code></dt>
|
|
<dd>
|
|
The <code>type</code> attribute represents the type of disk used
|
|
by the backing store, see disk type attribute above for more
|
|
details and possible values.
|
|
</dd>
|
|
<dt><code><a id="elementsDiskBackingStoreIndex">index</a></code></dt>
|
|
<dd>
|
|
This attribute is only valid in output (and ignored on input) and
|
|
it can be used to refer to a specific part of the disk chain when
|
|
doing block operations (such as via the
|
|
<code>virDomainBlockRebase</code> API). For example,
|
|
<code>vda[2]</code> refers to the backing store with
|
|
<code>index='2'</code> of the disk with <code>vda</code> target.
|
|
</dd>
|
|
</dl>
|
|
Moreover, <code>backingStore</code> supports the following sub-elements:
|
|
<dl>
|
|
<dt><code>format</code></dt>
|
|
<dd>
|
|
The <code>format</code> element contains <code>type</code>
|
|
attribute which specifies the internal format of the backing
|
|
store, such as <code>raw</code> or <code>qcow2</code>.
|
|
</dd>
|
|
<dt><code>source</code></dt>
|
|
<dd>
|
|
This element has the same structure as the <code>source</code>
|
|
element in <code>disk</code>. It specifies which file, device,
|
|
or network location contains the data of the described backing
|
|
store.
|
|
</dd>
|
|
<dt><code>backingStore</code></dt>
|
|
<dd>
|
|
If the backing store is not self-contained, the next element
|
|
in the chain is described by nested <code>backingStore</code>
|
|
element.
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>mirror</code></dt>
|
|
<dd>
|
|
This element is present if the hypervisor has started a
|
|
long-running block job operation, where the mirror location in
|
|
the <code>source</code> sub-element will eventually have the
|
|
same contents as the source, and with the file format in the
|
|
sub-element <code>format</code> (which might differ from the
|
|
format of the source). The details of the <code>source</code>
|
|
sub-element are determined by the <code>type</code> attribute
|
|
of the mirror, similar to what is done for the
|
|
overall <code>disk</code> device element. The <code>job</code>
|
|
attribute mentions which API started the operation ("copy" for
|
|
the <code>virDomainBlockRebase</code> API, or "active-commit"
|
|
for the <code>virDomainBlockCommit</code>
|
|
API), <span class="since">since 1.2.7</span>. The
|
|
attribute <code>ready</code>, if present, tracks progress of
|
|
the job: <code>yes</code> if the disk is known to be ready to
|
|
pivot, or, <span class="since">since
|
|
1.2.7</span>, <code>abort</code> or <code>pivot</code> if the
|
|
job is in the process of completing. If <code>ready</code> is
|
|
not present, the disk is probably still
|
|
copying. For now, this element only valid in output; it is
|
|
ignored on input. The <code>source</code> sub-element exists
|
|
for all two-phase jobs <span class="since">since 1.2.6</span>.
|
|
Older libvirt supported only block copy to a
|
|
file, <span class="since">since 0.9.12</span>; for
|
|
compatibility with older clients, such jobs include redundant
|
|
information in the attributes <code>file</code>
|
|
and <code>format</code> in the <code>mirror</code> element.
|
|
</dd>
|
|
<dt><code>target</code></dt>
|
|
<dd>The <code>target</code> element controls the bus / device
|
|
under which the disk is exposed to the guest
|
|
OS. The <code>dev</code> attribute indicates the "logical"
|
|
device name. The actual device name specified is not
|
|
guaranteed to map to the device name in the guest OS. Treat it
|
|
as a device ordering hint. The optional <code>bus</code>
|
|
attribute specifies the type of disk device to emulate;
|
|
possible values are driver specific, with typical values being
|
|
"ide", "scsi", "virtio", "xen", "usb", "sata", or
|
|
"sd" <span class="since">"sd" since 1.1.2</span>. If omitted, the bus
|
|
type is inferred from the style of the device name (e.g. a device named
|
|
'sda' will typically be exported using a SCSI bus). The optional
|
|
attribute <code>tray</code> indicates the tray status of the
|
|
removable disks (i.e. CDROM or Floppy disk), the value can be either
|
|
"open" or "closed", defaults to "closed". NB, the value of
|
|
<code>tray</code> could be updated while the domain is running.
|
|
The optional attribute <code>removable</code> sets the
|
|
removable flag for USB disks, and its value can be either "on"
|
|
or "off", defaulting to "off". <span class="since">Since
|
|
0.0.3; <code>bus</code> attribute since 0.4.3;
|
|
<code>tray</code> attribute since 0.9.11; "usb" attribute value since
|
|
after 0.4.4; "sata" attribute value since 0.9.7; "removable" attribute
|
|
value since 1.1.3</span>
|
|
</dd>
|
|
<dt><code>iotune</code></dt>
|
|
<dd>The optional <code>iotune</code> element provides the
|
|
ability to provide additional per-device I/O tuning, with
|
|
values that can vary for each device (contrast this to
|
|
the <a href="#elementsBlockTuning"><code><blkiotune></code></a>
|
|
element, which applies globally to the domain). Currently,
|
|
the only tuning available is Block I/O throttling for qemu.
|
|
This element has optional sub-elements; any sub-element not
|
|
specified or given with a value of 0 implies no
|
|
limit. <span class="since">Since 0.9.8</span>
|
|
<dl>
|
|
<dt><code>total_bytes_sec</code></dt>
|
|
<dd>The optional <code>total_bytes_sec</code> element is the
|
|
total throughput limit in bytes per second. This cannot
|
|
appear with <code>read_bytes_sec</code>
|
|
or <code>write_bytes_sec</code>.</dd>
|
|
<dt><code>read_bytes_sec</code></dt>
|
|
<dd>The optional <code>read_bytes_sec</code> element is the
|
|
read throughput limit in bytes per second.</dd>
|
|
<dt><code>write_bytes_sec</code></dt>
|
|
<dd>The optional <code>write_bytes_sec</code> element is the
|
|
write throughput limit in bytes per second.</dd>
|
|
<dt><code>total_iops_sec</code></dt>
|
|
<dd>The optional <code>total_iops_sec</code> element is the
|
|
total I/O operations per second. This cannot
|
|
appear with <code>read_iops_sec</code>
|
|
or <code>write_iops_sec</code>.</dd>
|
|
<dt><code>read_iops_sec</code></dt>
|
|
<dd>The optional <code>read_iops_sec</code> element is the
|
|
read I/O operations per second.</dd>
|
|
<dt><code>write_iops_sec</code></dt>
|
|
<dd>The optional <code>write_iops_sec</code> element is the
|
|
write I/O operations per second.</dd>
|
|
<dt><code>total_bytes_sec_max</code></dt>
|
|
<dd>The optional <code>total_bytes_sec_max</code> element is the
|
|
maximum total throughput limit in bytes per second. This cannot
|
|
appear with <code>read_bytes_sec_max</code>
|
|
or <code>write_bytes_sec_max</code>.</dd>
|
|
<dt><code>read_bytes_sec_max</code></dt>
|
|
<dd>The optional <code>read_bytes_sec_max</code> element is the
|
|
maximum read throughput limit in bytes per second.</dd>
|
|
<dt><code>write_bytes_sec_max</code></dt>
|
|
<dd>The optional <code>write_bytes_sec_max</code> element is the
|
|
maximum write throughput limit in bytes per second.</dd>
|
|
<dt><code>total_iops_sec_max</code></dt>
|
|
<dd>The optional <code>total_iops_sec_max</code> element is the
|
|
maximum total I/O operations per second. This cannot
|
|
appear with <code>read_iops_sec_max</code>
|
|
or <code>write_iops_sec_max</code>.</dd>
|
|
<dt><code>read_iops_sec_max</code></dt>
|
|
<dd>The optional <code>read_iops_sec_max</code> element is the
|
|
maximum read I/O operations per second.</dd>
|
|
<dt><code>write_iops_sec_max</code></dt>
|
|
<dd>The optional <code>write_iops_sec_max</code> element is the
|
|
maximum write I/O operations per second.</dd>
|
|
<dt><code>size_iops_sec</code></dt>
|
|
<dd>The optional <code>size_iops_sec</code> element is the
|
|
size of I/O operations per second.
|
|
<p>
|
|
<span class="since">Throughput limits since 1.2.11 and QEMU 1.7</span>
|
|
</p>
|
|
</dd>
|
|
<dt><code>group_name</code></dt>
|
|
<dd>The optional <code>group_name</code> provides the cability
|
|
to share I/O throttling quota between multiple drives. This
|
|
prevents end-users from circumventing a hosting provider's
|
|
throttling policy by splitting 1 large drive in N small drives
|
|
and getting N times the normal throttling quota. Any name may
|
|
be used.
|
|
<p>
|
|
<span class="since">group_name since 3.0.0 and QEMU 2.4</span>
|
|
</p>
|
|
</dd>
|
|
<dt><code>total_bytes_sec_max_length</code></dt>
|
|
<dd>The optional <code>total_bytes_sec_max_length</code>
|
|
element is the maximum duration in seconds for the
|
|
<code>total_bytes_sec_max</code> burst period. Only valid
|
|
when the <code>total_bytes_sec_max</code> is set.</dd>
|
|
<dt><code>read_bytes_sec_max_length</code></dt>
|
|
<dd>The optional <code>read_bytes_sec_max_length</code>
|
|
element is the maximum duration in seconds for the
|
|
<code>read_bytes_sec_max</code> burst period. Only valid
|
|
when the <code>read_bytes_sec_max</code> is set.</dd>
|
|
<dt><code>write_bytes_sec_max</code></dt>
|
|
<dd>The optional <code>write_bytes_sec_max_length</code>
|
|
element is the maximum duration in seconds for the
|
|
<code>write_bytes_sec_max</code> burst period. Only valid
|
|
when the <code>write_bytes_sec_max</code> is set.</dd>
|
|
<dt><code>total_iops_sec_max_length</code></dt>
|
|
<dd>The optional <code>total_iops_sec_max_length</code>
|
|
element is the maximum duration in seconds for the
|
|
<code>total_iops_sec_max</code> burst period. Only valid
|
|
when the <code>total_iops_sec_max</code> is set.</dd>
|
|
<dt><code>read_iops_sec_max_length</code></dt>
|
|
<dd>The optional <code>read_iops_sec_max_length</code>
|
|
element is the maximum duration in seconds for the
|
|
<code>read_iops_sec_max</code> burst period. Only valid
|
|
when the <code>read_iops_sec_max</code> is set.</dd>
|
|
<dt><code>write_iops_sec_max</code></dt>
|
|
<dd>The optional <code>write_iops_sec_max_length</code>
|
|
element is the maximum duration in seconds for the
|
|
<code>write_iops_sec_max</code> burst period. Only valid
|
|
when the <code>write_iops_sec_max</code> is set.
|
|
<p>
|
|
<span class="since">Throughput length since 2.4.0 and QEMU 2.6</span>
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>driver</code></dt>
|
|
<dd>
|
|
The optional driver element allows specifying further details
|
|
related to the hypervisor driver used to provide the disk.
|
|
<span class="since">Since 0.1.8</span>
|
|
<ul>
|
|
<li>
|
|
If the hypervisor supports multiple backend drivers, then
|
|
the <code>name</code> attribute selects the primary
|
|
backend driver name, while the optional <code>type</code>
|
|
attribute provides the sub-type. For example, xen
|
|
supports a name of "tap", "tap2", "phy", or "file", with a
|
|
type of "aio", while qemu only supports a name of "qemu",
|
|
but multiple types including "raw", "bochs", "qcow2", and
|
|
"qed".
|
|
</li>
|
|
<li>
|
|
The optional <code>cache</code> attribute controls the
|
|
cache mechanism, possible values are "default", "none",
|
|
"writethrough", "writeback", "directsync" (like
|
|
"writethrough", but it bypasses the host page cache) and
|
|
"unsafe" (host may cache all disk io, and sync requests from
|
|
guest are ignored).
|
|
<span class="since">
|
|
Since 0.6.0,
|
|
"directsync" since 0.9.5,
|
|
"unsafe" since 0.9.7
|
|
</span>
|
|
</li>
|
|
<li>
|
|
The optional <code>error_policy</code> attribute controls
|
|
how the hypervisor will behave on a disk read or write
|
|
error, possible values are "stop", "report", "ignore", and
|
|
"enospace".<span class="since">Since 0.8.0, "report" since
|
|
0.9.7</span> The default is left to the discretion of the
|
|
hypervisor. There is also an
|
|
optional <code>rerror_policy</code> that controls behavior
|
|
for read errors only. <span class="since">Since
|
|
0.9.7</span>. If no rerror_policy is given, error_policy
|
|
is used for both read and write errors. If rerror_policy
|
|
is given, it overrides the <code>error_policy</code> for
|
|
read errors. Also note that "enospace" is not a valid
|
|
policy for read errors, so if <code>error_policy</code> is
|
|
set to "enospace" and no <code>rerror_policy</code> is
|
|
given, the read error policy will be left at its default.
|
|
</li>
|
|
<li>
|
|
The optional <code>io</code> attribute controls specific
|
|
policies on I/O; qemu guests support "threads" and
|
|
"native". <span class="since">Since 0.8.8</span>
|
|
</li>
|
|
<li>
|
|
The optional <code>ioeventfd</code> attribute allows users to
|
|
set <a href='https://patchwork.kernel.org/patch/43390/'>
|
|
domain I/O asynchronous handling</a> for disk device.
|
|
The default is left to the discretion of the hypervisor.
|
|
Accepted values are "on" and "off". Enabling this allows
|
|
qemu to execute VM while a separate thread handles I/O.
|
|
Typically guests experiencing high system CPU utilization
|
|
during I/O will benefit from this. On the other hand,
|
|
on overloaded host it could increase guest I/O latency.
|
|
<span class="since">Since 0.9.3 (QEMU and KVM only)</span>
|
|
<b>In general you should leave this option alone, unless you
|
|
are very certain you know what you are doing.</b>
|
|
</li>
|
|
<li>
|
|
The optional <code>event_idx</code> attribute controls
|
|
some aspects of device event processing. The value can be
|
|
either 'on' or 'off' - if it is on, it will reduce the
|
|
number of interrupts and exits for the guest. The default
|
|
is determined by QEMU; usually if the feature is
|
|
supported, default is on. In case there is a situation
|
|
where this behavior is suboptimal, this attribute provides
|
|
a way to force the feature off.
|
|
<span class="since">Since 0.9.5 (QEMU and KVM only)</span>
|
|
<b>In general you should leave this option alone, unless you
|
|
are very certain you know what you are doing.</b>
|
|
</li>
|
|
<li>
|
|
The optional <code>copy_on_read</code> attribute controls
|
|
whether to copy read backing file into the image file. The
|
|
value can be either "on" or "off".
|
|
Copy-on-read avoids accessing the same backing file sectors
|
|
repeatedly and is useful when the backing file is over a slow
|
|
network. By default copy-on-read is off.
|
|
<span class='since'>Since 0.9.10 (QEMU and KVM only)</span>
|
|
</li>
|
|
<li>
|
|
The optional <code>discard</code> attribute controls whether
|
|
discard requests (also known as "trim" or "unmap") are
|
|
ignored or passed to the filesystem. The value can be either
|
|
"unmap" (allow the discard request to be passed) or "ignore"
|
|
(ignore the discard request).
|
|
<span class='since'>Since 1.0.6 (QEMU and KVM only)</span>
|
|
</li>
|
|
<li>
|
|
The optional <code>detect_zeroes</code> attribute controls whether
|
|
to detect zero write requests. The value can be "off", "on" or
|
|
"unmap". First two values turn the detection off and on,
|
|
respectively. The third value ("unmap") turns the detection on
|
|
and additionally tries to discard such areas from the image based
|
|
on the value of <code>discard</code> above (it will act as "on"
|
|
if <code>discard</code> is set to "ignore"). NB enabling the
|
|
detection is a compute intensive operation, but can save file
|
|
space and/or time on slow media.
|
|
<span class='since'>Since 2.0.0</span>
|
|
</li>
|
|
<li>
|
|
The optional <code>iothread</code> attribute assigns the
|
|
disk to an IOThread as defined by the range for the domain
|
|
<a href="#elementsIOThreadsAllocation"><code>iothreads</code></a>
|
|
value. Multiple disks may be assigned to the same IOThread and
|
|
are numbered from 1 to the domain iothreads value. Available
|
|
for a disk device <code>target</code> configured to use "virtio"
|
|
<code>bus</code> and "pci" or "ccw" <code>address</code> types.
|
|
<span class='since'>Since 1.2.8 (QEMU 2.1)</span>
|
|
</li>
|
|
<li>
|
|
The optional <code>queues</code> attribute specifies the number of
|
|
virt queues for virtio-blk. (<span class="since">Since 3.9.0</span>)
|
|
</li>
|
|
<li>
|
|
For virtio disks,
|
|
<a href="#elementsVirtio">Virtio-specific options</a> can also be
|
|
set. (<span class="since">Since 3.5.0</span>)
|
|
</li>
|
|
</ul>
|
|
</dd>
|
|
<dt><code>backenddomain</code></dt>
|
|
<dd>The optional <code>backenddomain</code> element allows specifying a
|
|
backend domain (aka driver domain) hosting the disk. Use the
|
|
<code>name</code> attribute to specify the backend domain name.
|
|
<span class="since">Since 1.2.13 (Xen only)</span>
|
|
</dd>
|
|
<dt><code>boot</code></dt>
|
|
<dd>Specifies that the disk is bootable. The <code>order</code>
|
|
attribute determines the order in which devices will be tried during
|
|
boot sequence. On the S390 architecture only the first boot device is
|
|
used. The optional <code>loadparm</code> attribute is an 8 character
|
|
string which can be queried by guests on S390 via sclp or diag 308.
|
|
Linux guests on S390 can use <code>loadparm</code> to select a boot
|
|
entry. <span class="since">Since 3.5.0</span>
|
|
The per-device <code>boot</code> elements cannot be used together
|
|
with general boot elements in
|
|
<a href="#elementsOSBIOS">BIOS bootloader</a> section.
|
|
<span class="since">Since 0.8.8</span>
|
|
</dd>
|
|
<dt><code>encryption</code></dt>
|
|
<dd>Starting with <span class="since">libvirt 3.9.0</span> the
|
|
<code>encryption</code> element is preferred to be a sub-element
|
|
of the <code>source</code> element. If present, specifies how the
|
|
volume is encrypted using "qcow". See the
|
|
<a href="formatstorageencryption.html">Storage Encryption</a> page
|
|
for more information.
|
|
</dd>
|
|
<dt><code>readonly</code></dt>
|
|
<dd>If present, this indicates the device cannot be modified by
|
|
the guest. For now, this is the default for disks with
|
|
attribute <code>device='cdrom'</code>.
|
|
</dd>
|
|
<dt><code>shareable</code></dt>
|
|
<dd>If present, this indicates the device is expected to be shared
|
|
between domains (assuming the hypervisor and OS support this),
|
|
which means that caching should be deactivated for that device.
|
|
</dd>
|
|
<dt><code>transient</code></dt>
|
|
<dd>If present, this indicates that changes to the device
|
|
contents should be reverted automatically when the guest
|
|
exits. With some hypervisors, marking a disk transient
|
|
prevents the domain from participating in migration or
|
|
snapshots. <span class="since">Since 0.9.5</span>
|
|
</dd>
|
|
<dt><code>serial</code></dt>
|
|
<dd>If present, this specify serial number of virtual hard drive.
|
|
For example, it may look
|
|
like <code><serial>WD-WMAP9A966149</serial></code>.
|
|
Not supported for scsi-block devices, that is those using
|
|
disk <code>type</code> 'block' using <code>device</code> 'lun'
|
|
on <code>bus</code> 'scsi'.
|
|
<span class="since">Since 0.7.1</span>
|
|
</dd>
|
|
<dt><code>wwn</code></dt>
|
|
<dd>If present, this element specifies the WWN (World Wide Name)
|
|
of a virtual hard disk or CD-ROM drive. It must be composed
|
|
of 16 hexadecimal digits.
|
|
<span class='since'>Since 0.10.1</span>
|
|
</dd>
|
|
<dt><code>vendor</code></dt>
|
|
<dd>If present, this element specifies the vendor of a virtual hard
|
|
disk or CD-ROM device. It must not be longer than 8 printable
|
|
characters.
|
|
<span class='since'>Since 1.0.1</span>
|
|
</dd>
|
|
<dt><code>product</code></dt>
|
|
<dd>If present, this element specifies the product of a virtual hard
|
|
disk or CD-ROM device. It must not be longer than 16 printable
|
|
characters.
|
|
<span class='since'>Since 1.0.1</span>
|
|
</dd>
|
|
<dt><code>address</code></dt>
|
|
<dd>If present, the <code>address</code> element ties the disk
|
|
to a given slot of a controller (the
|
|
actual <code><controller></code> device can often be
|
|
inferred by libvirt, although it can
|
|
be <a href="#elementsControllers">explicitly specified</a>).
|
|
The <code>type</code> attribute is mandatory, and is typically
|
|
"pci" or "drive". For a "pci" controller, additional
|
|
attributes for <code>bus</code>, <code>slot</code>,
|
|
and <code>function</code> must be present, as well as
|
|
optional <code>domain</code> and <code>multifunction</code>.
|
|
Multifunction defaults to 'off'; any other value requires
|
|
QEMU 0.1.3 and <span class="since">libvirt 0.9.7</span>. For a
|
|
"drive" controller, additional attributes
|
|
<code>controller</code>, <code>bus</code>, <code>target</code>
|
|
(<span class="since">libvirt 0.9.11</span>), and <code>unit</code>
|
|
are available, each defaulting to 0.
|
|
</dd>
|
|
<dt><code>auth</code></dt>
|
|
<dd>Starting with <span class="since">libvirt 3.9.0</span> the
|
|
<code>auth</code> element is preferred to be a sub-element of
|
|
the <code>source</code> element. The element is still read and
|
|
managed as a <code>disk</code> sub-element. It is invalid to use
|
|
<code>auth</code> as both a sub-element of <code>disk</code>
|
|
and <code>source</code>. The <code>auth</code> element was
|
|
introduced as a <code>disk</code> sub-element in
|
|
<span class="since">libvirt 0.9.7.</span>
|
|
</dd>
|
|
<dt><code>geometry</code></dt>
|
|
<dd>The optional <code>geometry</code> element provides the
|
|
ability to override geometry settings. This mostly useful for
|
|
S390 DASD-disks or older DOS-disks. <span class="since">0.10.0</span>
|
|
<dl>
|
|
<dt><code>cyls</code></dt>
|
|
<dd>The <code>cyls</code> attribute is the
|
|
number of cylinders. </dd>
|
|
<dt><code>heads</code></dt>
|
|
<dd>The <code>heads</code> attribute is the
|
|
number of heads. </dd>
|
|
<dt><code>secs</code></dt>
|
|
<dd>The <code>secs</code> attribute is the
|
|
number of sectors per track. </dd>
|
|
<dt><code>trans</code></dt>
|
|
<dd>The optional <code>trans</code> attribute is the
|
|
BIOS-Translation-Modus (none, lba or auto)</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>blockio</code></dt>
|
|
<dd>If present, the <code>blockio</code> element allows
|
|
to override any of the block device properties listed below.
|
|
<span class="since">Since 0.10.2 (QEMU and KVM)</span>
|
|
<dl>
|
|
<dt><code>logical_block_size</code></dt>
|
|
<dd>The logical block size the disk will report to the guest
|
|
OS. For Linux this would be the value returned by the
|
|
BLKSSZGET ioctl and describes the smallest units for disk
|
|
I/O.
|
|
</dd>
|
|
<dt><code>physical_block_size</code></dt>
|
|
<dd>The physical block size the disk will report to the guest
|
|
OS. For Linux this would be the value returned by the
|
|
BLKPBSZGET ioctl and describes the disk's hardware sector
|
|
size which can be relevant for the alignment of disk data.
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsFilesystems">Filesystems</a></h4>
|
|
|
|
<p>
|
|
A directory on the host that can be accessed directly from the guest.
|
|
<span class="since">since 0.3.3, since 0.8.5 for QEMU/KVM</span>
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<filesystem type='template'>
|
|
<source name='my-vm-template'/>
|
|
<target dir='/'/>
|
|
</filesystem>
|
|
<filesystem type='mount' accessmode='passthrough'>
|
|
<driver type='path' wrpolicy='immediate'/>
|
|
<source dir='/export/to/guest'/>
|
|
<target dir='/import/from/host'/>
|
|
<readonly/>
|
|
</filesystem>
|
|
<filesystem type='file' accessmode='passthrough'>
|
|
<driver name='loop' type='raw'/>
|
|
<driver type='path' wrpolicy='immediate'/>
|
|
<source file='/export/to/guest.img'/>
|
|
<target dir='/import/from/host'/>
|
|
<readonly/>
|
|
</filesystem>
|
|
...
|
|
</devices>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>filesystem</code></dt>
|
|
<dd>
|
|
|
|
The filesystem attribute <code>type</code> specifies the type of the
|
|
<code>source</code>. The possible values are:
|
|
|
|
<dl>
|
|
<dt><code>mount</code></dt>
|
|
<dd>
|
|
A host directory to mount in the guest. Used by LXC,
|
|
OpenVZ <span class="since">(since 0.6.2)</span>
|
|
and QEMU/KVM <span class="since">(since 0.8.5)</span>.
|
|
This is the default <code>type</code> if one is not specified.
|
|
This mode also has an optional
|
|
sub-element <code>driver</code>, with an
|
|
attribute <code>type='path'</code>
|
|
or <code>type='handle'</code> <span class="since">(since
|
|
0.9.7)</span>. The driver block has an optional attribute
|
|
<code>wrpolicy</code> that further controls interaction with
|
|
the host page cache; omitting the attribute gives default behavior,
|
|
while the value <code>immediate</code> means that a host writeback
|
|
is immediately triggered for all pages touched during a guest file
|
|
write operation <span class="since">(since 0.9.10)</span>.
|
|
</dd>
|
|
<dt><code>template</code></dt>
|
|
<dd>
|
|
OpenVZ filesystem template. Only used by OpenVZ driver.
|
|
</dd>
|
|
<dt><code>file</code></dt>
|
|
<dd>
|
|
A host file will be treated as an image and mounted in
|
|
the guest. The filesystem format will be autodetected.
|
|
Only used by LXC driver.
|
|
</dd>
|
|
<dt><code>block</code></dt>
|
|
<dd>
|
|
A host block device to mount in the guest. The filesystem
|
|
format will be autodetected. Only used by LXC driver
|
|
<span class="since">(since 0.9.5)</span>.
|
|
</dd>
|
|
<dt><code>ram</code></dt>
|
|
<dd>
|
|
An in-memory filesystem, using memory from the host OS.
|
|
The source element has a single attribute <code>usage</code>
|
|
which gives the memory usage limit in KiB, unless units
|
|
are specified by the <code>units</code> attribute. Only used
|
|
by LXC driver.
|
|
<span class="since"> (since 0.9.13)</span></dd>
|
|
<dt><code>bind</code></dt>
|
|
<dd>
|
|
A directory inside the guest will be bound to another
|
|
directory inside the guest. Only used by LXC driver
|
|
<span class="since"> (since 0.9.13)</span></dd>
|
|
</dl>
|
|
|
|
The filesystem block has an optional attribute <code>accessmode</code>
|
|
which specifies the security mode for accessing the source
|
|
<span class="since">(since 0.8.5)</span>. Currently this only works
|
|
with <code>type='mount'</code> for the QEMU/KVM driver. The possible
|
|
values are:
|
|
|
|
<dl>
|
|
<dt><code>passthrough</code></dt>
|
|
<dd>
|
|
The <code>source</code> is accessed with the permissions of the
|
|
user inside the guest. This is the default <code>accessmode</code> if
|
|
one is not specified.
|
|
<a href="http://lists.gnu.org/archive/html/qemu-devel/2010-05/msg02673.html">More info</a>
|
|
</dd>
|
|
<dt><code>mapped</code></dt>
|
|
<dd>
|
|
The <code>source</code> is accessed with the permissions of the
|
|
hypervisor (QEMU process).
|
|
<a href="http://lists.gnu.org/archive/html/qemu-devel/2010-05/msg02673.html">More info</a>
|
|
</dd>
|
|
<dt><code>squash</code></dt>
|
|
<dd>
|
|
Similar to 'passthrough', the exception is that failure of
|
|
privileged operations like 'chown' are ignored. This makes a
|
|
passthrough-like mode usable for people who run the hypervisor
|
|
as non-root.
|
|
<a href="http://lists.gnu.org/archive/html/qemu-devel/2010-09/msg00121.html">More info</a>
|
|
</dd>
|
|
</dl>
|
|
|
|
<span class="since">Since 5.2.0</span>, the filesystem element
|
|
has an optional attribute <code>model</code> with supported values
|
|
"virtio-transitional", "virtio-non-transitional", or "virtio".
|
|
See <a href="#elementsVirtioTransitional">Virtio transitional devices</a>
|
|
for more details.
|
|
</dd>
|
|
|
|
<dt><code>driver</code></dt>
|
|
<dd>
|
|
The optional driver element allows specifying further details
|
|
related to the hypervisor driver used to provide the filesystem.
|
|
<span class="since">Since 1.0.6</span>
|
|
<ul>
|
|
<li>
|
|
If the hypervisor supports multiple backend drivers, then
|
|
the <code>type</code> attribute selects the primary
|
|
backend driver name, while the <code>format</code>
|
|
attribute provides the format type. For example, LXC
|
|
supports a type of "loop", with a format of "raw" or
|
|
"nbd" with any format. QEMU supports a type of "path"
|
|
or "handle", but no formats. Virtuozzo driver supports
|
|
a type of "ploop" with a format of "ploop".
|
|
</li>
|
|
<li>
|
|
For virtio-backed devices,
|
|
<a href="#elementsVirtio">Virtio-specific options</a> can also be
|
|
set. (<span class="since">Since 3.5.0</span>)
|
|
</li>
|
|
</ul>
|
|
</dd>
|
|
|
|
<dt><code>source</code></dt>
|
|
<dd>
|
|
The resource on the host that is being accessed in the guest. The
|
|
<code>name</code> attribute must be used with
|
|
<code>type='template'</code>, and the <code>dir</code> attribute must
|
|
be used with <code>type='mount'</code>. The <code>usage</code> attribute
|
|
is used with <code>type='ram'</code> to set the memory limit in KiB,
|
|
unless units are specified by the <code>units</code> attribute.
|
|
</dd>
|
|
|
|
<dt><code>target</code></dt>
|
|
<dd>
|
|
Where the <code>source</code> can be accessed in the guest. For
|
|
most drivers this is an automatic mount point, but for QEMU/KVM
|
|
this is merely an arbitrary string tag that is exported to the
|
|
guest as a hint for where to mount.
|
|
</dd>
|
|
|
|
<dt><code>readonly</code></dt>
|
|
<dd>
|
|
Enables exporting filesystem as a readonly mount for guest, by
|
|
default read-write access is given (currently only works for
|
|
QEMU/KVM driver).
|
|
</dd>
|
|
|
|
<dt><code>space_hard_limit</code></dt>
|
|
<dd>
|
|
Maximum space available to this guest's filesystem.
|
|
<span class="since">Since 0.9.13</span>
|
|
</dd>
|
|
|
|
<dt><code>space_soft_limit</code></dt>
|
|
<dd>
|
|
Maximum space available to this guest's filesystem. The container is
|
|
permitted to exceed its soft limits for a grace period of time. Afterwards the
|
|
hard limit is enforced.
|
|
<span class="since">Since 0.9.13</span>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsAddress">Device Addresses</a></h4>
|
|
|
|
<p>
|
|
Many devices have an optional <code><address></code>
|
|
sub-element to describe where the device is placed on the
|
|
virtual bus presented to the guest. If an address (or any
|
|
optional attribute within an address) is omitted on
|
|
input, libvirt will generate an appropriate address; but an
|
|
explicit address is required if more control over layout is
|
|
required. See below for device examples including an address
|
|
element.
|
|
</p>
|
|
|
|
<p>
|
|
Every address has a mandatory attribute <code>type</code> that
|
|
describes which bus the device is on. The choice of which
|
|
address to use for a given device is constrained in part by the
|
|
device and the architecture of the guest. For example,
|
|
a <code><disk></code> device
|
|
uses <code>type='drive'</code>, while
|
|
a <code><console></code> device would
|
|
use <code>type='pci'</code> on i686 or x86_64 guests,
|
|
or <code>type='spapr-vio'</code> on PowerPC64 pseries guests.
|
|
Each address type has further optional attributes that control
|
|
where on the bus the device will be placed:
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>pci</code></dt>
|
|
<dd>PCI addresses have the following additional
|
|
attributes: <code>domain</code> (a 2-byte hex integer, not
|
|
currently used by qemu), <code>bus</code> (a hex value between
|
|
0 and 0xff, inclusive), <code>slot</code> (a hex value between
|
|
0x0 and 0x1f, inclusive), and <code>function</code> (a value
|
|
between 0 and 7, inclusive). Also available is
|
|
the <code>multifunction</code> attribute, which controls
|
|
turning on the multifunction bit for a particular
|
|
slot/function in the PCI control register
|
|
(<span class="since">since 0.9.7, requires QEMU
|
|
0.13</span>). <code>multifunction</code> defaults to 'off',
|
|
but should be set to 'on' for function 0 of a slot that will
|
|
have multiple functions used.
|
|
(<span class="since">Since 4.10.0</span>), PCI address extensions
|
|
depending on the architecture are supported. For example, PCI
|
|
addresses for S390 guests will have a <code>zpci</code> child
|
|
element, with two attributes: <code>uid</code> (a hex value
|
|
between 0x0001 and 0xffff, inclusive), and <code>fid</code> (a
|
|
hex value between 0x00000000 and 0xffffffff, inclusive) used by
|
|
PCI devices on S390 for User-defined Identifiers and Function
|
|
Identifiers.<br/>
|
|
<span class="since">Since 1.3.5</span>, some hypervisor
|
|
drivers may accept an <code><address type='pci'/></code>
|
|
element with no other attributes as an explicit request to
|
|
assign a PCI address for the device rather than some other
|
|
type of address that may also be appropriate for that same
|
|
device (e.g. virtio-mmio).
|
|
</dd>
|
|
<dt><code>drive</code></dt>
|
|
<dd>Drive addresses have the following additional
|
|
attributes: <code>controller</code> (a 2-digit controller
|
|
number), <code>bus</code> (a 2-digit bus number),
|
|
<code>target</code> (a 2-digit target number),
|
|
and <code>unit</code> (a 2-digit unit number on the bus).
|
|
</dd>
|
|
<dt><code>virtio-serial</code></dt>
|
|
<dd>Each virtio-serial address has the following additional
|
|
attributes: <code>controller</code> (a 2-digit controller
|
|
number), <code>bus</code> (a 2-digit bus number),
|
|
and <code>slot</code> (a 2-digit slot within the bus).
|
|
</dd>
|
|
<dt><code>ccid</code></dt>
|
|
<dd>A CCID address, for smart-cards, has the following
|
|
additional attributes: <code>bus</code> (a 2-digit bus
|
|
number), and <code>slot</code> attribute (a 2-digit slot
|
|
within the bus). <span class="since">Since 0.8.8.</span>
|
|
</dd>
|
|
<dt><code>usb</code></dt>
|
|
<dd>USB addresses have the following additional
|
|
attributes: <code>bus</code> (a hex value between 0 and 0xfff,
|
|
inclusive), and <code>port</code> (a dotted notation of up to
|
|
four octets, such as 1.2 or 2.1.3.1).
|
|
</dd>
|
|
<dt><code>spapr-vio</code></dt>
|
|
<dd>On PowerPC pseries guests, devices can be assigned to the
|
|
SPAPR-VIO bus. It has a flat 32-bit address space; by
|
|
convention, devices are generally assigned at a non-zero
|
|
multiple of 0x00001000, but other addresses are valid and
|
|
permitted by libvirt. Each address has the following
|
|
additional attribute: <code>reg</code> (the hex value address
|
|
of the starting register). <span class="since">Since
|
|
0.9.9.</span>
|
|
</dd>
|
|
<dt><code>ccw</code></dt>
|
|
<dd>S390 guests with a <code>machine</code> value of
|
|
s390-ccw-virtio use the native CCW bus for I/O devices.
|
|
CCW bus addresses have the following additional attributes:
|
|
<code>cssid</code> (a hex value between 0 and 0xfe, inclusive),
|
|
<code>ssid</code> (a value between 0 and 3, inclusive) and
|
|
<code>devno</code> (a hex value between 0 and 0xffff, inclusive).
|
|
Partially specified bus addresses are not allowed.
|
|
If omitted, libvirt will assign a free bus address with
|
|
cssid=0xfe and ssid=0. Virtio-ccw devices must have their cssid
|
|
set to 0xfe.
|
|
<span class="since">Since 1.0.4</span>
|
|
</dd>
|
|
<dt><code>virtio-mmio</code></dt>
|
|
<dd>This places the device on the virtio-mmio transport, which is
|
|
currently only available for some <code>armv7l</code> and
|
|
<code>aarch64</code> virtual machines. virtio-mmio addresses
|
|
do not have any additional attributes.
|
|
<span class="since">Since 1.1.3</span><br/>
|
|
If the guest architecture is <code>aarch64</code> and the machine
|
|
type is <code>virt</code>, libvirt will automatically assign PCI
|
|
addresses to devices; however, the presence of a single device
|
|
with virtio-mmio address in the guest configuration will cause
|
|
libvirt to assign virtio-mmio addresses to all further devices.
|
|
<span class="since">Since 3.0.0</span>
|
|
</dd>
|
|
<dt><code>isa</code></dt>
|
|
<dd>ISA addresses have the following additional
|
|
attributes: <code>iobase</code> and <code>irq</code>.
|
|
<span class="since">Since 1.2.1</span>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsVirtio">Virtio-related options</a></h4>
|
|
|
|
<p>
|
|
QEMU's virtio devices have some attributes related to the virtio transport under
|
|
the <code>driver</code> element:
|
|
The <code>iommu</code> attribute enables the use of emulated IOMMU
|
|
by the device. The attribute <code>ats</code> controls the Address
|
|
Translation Service support for PCIe devices. This is needed to make use
|
|
of IOTLB support (see <a href="#elementsIommu">IOMMU device</a>).
|
|
Possible values are <code>on</code> or <code>off</code>.
|
|
<span class="since">Since 3.5.0</span>
|
|
</p>
|
|
|
|
<h4><a id="elementsVirtioTransitional">Virtio transitional devices</a></h4>
|
|
|
|
<p>
|
|
<span class="since">Since 5.2.0</span>, some of QEMU's virtio devices,
|
|
when used with PCI/PCIe machine types, accept the following
|
|
<code>model</code> values:
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>virtio-transitional</code></dt>
|
|
<dd>This device can work both with virtio 0.9 and virtio 1.0 guest
|
|
drivers, so it's the best choice when compatibility with older
|
|
guest operating systems is desired. libvirt will plug the device
|
|
into a conventional PCI slot.
|
|
</dd>
|
|
<dt><code>virtio-non-transitional</code></dt>
|
|
<dd>This device can only work with virtio 1.0 guest drivers, and it's
|
|
the recommended option unless compatibility with older guest
|
|
operating systems is necessary. libvirt will plug the device into
|
|
either a PCI Express slot or a conventional PCI slot based on the
|
|
machine type, resulting in a more optimized PCI topology.
|
|
</dd>
|
|
<dt><code>virtio</code></dt>
|
|
<dd>This device will work like a <code>virtio-non-transitional</code>
|
|
device when plugged into a PCI Express slot, and like a
|
|
<code>virtio-transitional</code> device otherwise; libvirt will
|
|
pick one or the other based on the machine type. This is the best
|
|
choice when compatibility with libvirt versions older than 5.2.0
|
|
is necessary, but it's otherwise not recommended to use it.
|
|
</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
While the information outlined above applies to most virtio devices,
|
|
there are a few exceptions:
|
|
</p>
|
|
|
|
<ul>
|
|
<li>
|
|
for SCSI controllers, <code>virtio-scsi</code> must be used instead
|
|
of <code>virtio</code> for backwards compatibility reasons;
|
|
</li>
|
|
<li>
|
|
some devices, such as GPUs and input devices (keyboard, tablet and
|
|
mouse), are only defined in the virtio 1.0 spec and as such don't
|
|
have a transitional variant: the only accepted model is
|
|
<code>virtio</code>, which will result in a non-transitional device.
|
|
</li>
|
|
</ul>
|
|
|
|
<p>
|
|
For more details see the
|
|
<a href="https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg00923.html">qemu patch posting</a> and the
|
|
<a href="http://docs.oasis-open.org/virtio/virtio/v1.0/virtio-v1.0.html">virtio-1.0 spec</a>.
|
|
</p>
|
|
|
|
|
|
<h4><a id="elementsControllers">Controllers</a></h4>
|
|
|
|
<p>
|
|
Depending on the guest architecture, some device buses can
|
|
appear more than once, with a group of virtual devices tied to a
|
|
virtual controller. Normally, libvirt can automatically infer such
|
|
controllers without requiring explicit XML markup, but sometimes
|
|
it is necessary to provide an explicit controller element, notably
|
|
when planning the <a href="pci-hotplug.html">PCI topology</a>
|
|
for guests where device hotplug is expected.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<controller type='ide' index='0'/>
|
|
<controller type='virtio-serial' index='0' ports='16' vectors='4'/>
|
|
<controller type='virtio-serial' index='1'>
|
|
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
|
|
</controller>
|
|
<controller type='scsi' index='0' model='virtio-scsi'>
|
|
<driver iothread='4'/>
|
|
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
|
|
</controller>
|
|
<controller type='xenbus' maxGrantFrames='64'/>
|
|
...
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
Each controller has a mandatory attribute <code>type</code>,
|
|
which must be one of 'ide', 'fdc', 'scsi', 'sata', 'usb',
|
|
'ccid', 'virtio-serial' or 'pci', and a mandatory
|
|
attribute <code>index</code> which is the decimal integer
|
|
describing in which order the bus controller is encountered (for
|
|
use in <code>controller</code> attributes of
|
|
<code><address></code> elements).
|
|
<span class="since">Since 1.3.5</span> the index is optional; if
|
|
not specified, it will be auto-assigned to be the lowest unused
|
|
index for the given controller type. Some controller types have
|
|
additional attributes that control specific features, such as:
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>virtio-serial</code></dt>
|
|
<dd>The <code>virtio-serial</code> controller has two additional
|
|
optional attributes <code>ports</code> and <code>vectors</code>,
|
|
which control how many devices can be connected through the
|
|
controller. <span class="since">Since 5.2.0</span>, it
|
|
supports an optional attribute <code>model</code> which can
|
|
be 'virtio', 'virtio-transitional', or 'virtio-non-transitional'. See
|
|
<a href="#elementsVirtioTransitional">Virtio transitional devices</a>
|
|
for more details.
|
|
</dd>
|
|
<dt><code>scsi</code></dt>
|
|
<dd>A <code>scsi</code> controller has an optional attribute
|
|
<code>model</code>, which is one of 'auto', 'buslogic', 'ibmvscsi',
|
|
'lsilogic', 'lsisas1068', 'lsisas1078', 'virtio-scsi',
|
|
'vmpvscsi', 'virtio-transitional', 'virtio-non-transitional'. See
|
|
<a href="#elementsVirtioTransitional">Virtio transitional devices</a>
|
|
for more details.
|
|
</dd>
|
|
<dt><code>usb</code></dt>
|
|
<dd>A <code>usb</code> controller has an optional attribute
|
|
<code>model</code>, which is one of "piix3-uhci", "piix4-uhci",
|
|
"ehci", "ich9-ehci1", "ich9-uhci1", "ich9-uhci2", "ich9-uhci3",
|
|
"vt82c686b-uhci", "pci-ohci", "nec-xhci", "qusb1" (xen pvusb
|
|
with qemu backend, version 1.1), "qusb2" (xen pvusb with qemu
|
|
backend, version 2.0) or "qemu-xhci". Additionally,
|
|
<span class="since">since 0.10.0</span>, if the USB bus needs to
|
|
be explicitly disabled for the guest, <code>model='none'</code>
|
|
may be used. <span class="since">Since 1.0.5</span>, no default
|
|
USB controller will be built on s390.
|
|
<span class="since">Since 1.3.5</span>, USB controllers accept a
|
|
<code>ports</code> attribute to configure how many devices can be
|
|
connected to the controller.</dd>
|
|
<dt><code>ide</code></dt>
|
|
<dd><span class="since">Since 3.10.0</span> for the vbox driver, the
|
|
<code>ide</code> controller has an optional attribute
|
|
<code>model</code>, which is one of "piix3", "piix4" or "ich6".</dd>
|
|
<dt><code>xenbus</code></dt>
|
|
<dd><span class="since">Since 5.2.0</span>, the <code>xenbus</code>
|
|
controller has an optional attribute <code>maxGrantFrames</code>,
|
|
which specifies the maximum number of grant frames the controller
|
|
makes available for connected devices.</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
Note: The PowerPC64 "spapr-vio" addresses do not have an
|
|
associated controller.
|
|
</p>
|
|
|
|
<p>
|
|
For controllers that are themselves devices on a PCI or USB bus,
|
|
an optional sub-element <code><address></code> can specify
|
|
the exact relationship of the controller to its master bus, with
|
|
semantics <a href="#elementsAddress">given above</a>.
|
|
</p>
|
|
|
|
<p>
|
|
An optional sub-element <code>driver</code> can specify the driver
|
|
specific options:
|
|
</p>
|
|
<dl>
|
|
<dt><code>queues</code></dt>
|
|
<dd>
|
|
The optional <code>queues</code> attribute specifies the number of
|
|
queues for the controller. For best performance, it's recommended to
|
|
specify a value matching the number of vCPUs.
|
|
<span class="since">Since 1.0.5 (QEMU and KVM only)</span>
|
|
</dd>
|
|
<dt><code>cmd_per_lun</code></dt>
|
|
<dd>
|
|
The optional <code>cmd_per_lun</code> attribute specifies the maximum
|
|
number of commands that can be queued on devices controlled by the
|
|
host.
|
|
<span class="since">Since 1.2.7 (QEMU and KVM only)</span>
|
|
</dd>
|
|
<dt><code>max_sectors</code></dt>
|
|
<dd>
|
|
The optional <code>max_sectors</code> attribute specifies the maximum
|
|
amount of data in bytes that will be transferred to or from the device
|
|
in a single command. The transfer length is measured in sectors, where
|
|
a sector is 512 bytes.
|
|
<span class="since">Since 1.2.7 (QEMU and KVM only)</span>
|
|
</dd>
|
|
<dt><code>ioeventfd</code></dt>
|
|
<dd>
|
|
The optional <code>ioeventfd</code> attribute specifies
|
|
whether the controller should use
|
|
<a href='https://patchwork.kernel.org/patch/43390/'>
|
|
I/O asynchronous handling</a> or not. Accepted values are
|
|
"on" and "off". <span class="since">Since 1.2.18</span>
|
|
</dd>
|
|
<dt><code>iothread</code></dt>
|
|
<dd>
|
|
Supported for controller type <code>scsi</code> using model
|
|
<code>virtio-scsi</code> for <code>address</code> types
|
|
<code>pci</code> and <code>ccw</code>
|
|
<span class="since">since 1.3.5 (QEMU 2.4)</span>.
|
|
|
|
The optional <code>iothread</code> attribute assigns the controller
|
|
to an IOThread as defined by the range for the domain
|
|
<a href="#elementsIOThreadsAllocation"><code>iothreads</code></a>
|
|
value. Each SCSI <code>disk</code> assigned to use the specified
|
|
<code>controller</code> will utilize the same IOThread. If a specific
|
|
IOThread is desired for a specific SCSI <code>disk</code>, then
|
|
multiple controllers must be defined each having a specific
|
|
<code>iothread</code> value. The <code>iothread</code> value
|
|
must be within the range 1 to the domain iothreads value.
|
|
</dd>
|
|
<dt>virtio options</dt>
|
|
<dd>
|
|
For virtio controllers,
|
|
<a href="#elementsVirtio">Virtio-specific options</a> can also be
|
|
set. (<span class="since">Since 3.5.0</span>)
|
|
</dd>
|
|
</dl>
|
|
<p>
|
|
USB companion controllers have an optional
|
|
sub-element <code><master></code> to specify the exact
|
|
relationship of the companion to its master controller.
|
|
A companion controller is on the same bus as its master, so
|
|
the companion <code>index</code> value should be equal.
|
|
Not all controller models can be used as companion controllers
|
|
and libvirt might provide some sensible defaults (settings
|
|
of <code>master startport</code> and <code>function</code> of an
|
|
address) for some particular models.
|
|
Preferred companion controllers are <code>ich-uhci[123]</code>.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<controller type='usb' index='0' model='ich9-ehci1'>
|
|
<address type='pci' domain='0' bus='0' slot='4' function='7'/>
|
|
</controller>
|
|
<controller type='usb' index='0' model='ich9-uhci1'>
|
|
<master startport='0'/>
|
|
<address type='pci' domain='0' bus='0' slot='4' function='0' multifunction='on'/>
|
|
</controller>
|
|
...
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
PCI controllers have an optional <code>model</code> attribute; possible
|
|
values for this attribute are
|
|
</p>
|
|
<ul>
|
|
<li>
|
|
<code>pci-root</code>, <code>pci-bridge</code>
|
|
(<span class="since">since 1.0.5</span>)
|
|
</li>
|
|
<li>
|
|
<code>pcie-root</code>, <code>dmi-to-pci-bridge</code>
|
|
(<span class="since">since 1.1.2</span>)
|
|
</li>
|
|
<li>
|
|
<code>pcie-root-port</code>, <code>pcie-switch-upstream-port</code>,
|
|
<code>pcie-switch-downstream-port</code>
|
|
(<span class="since">since 1.2.19</span>)
|
|
</li>
|
|
<li>
|
|
<code>pci-expander-bus</code>, <code>pcie-expander-bus</code>
|
|
(<span class="since">since 1.3.4</span>)
|
|
</li>
|
|
<li>
|
|
<code>pcie-to-pci-bridge</code>
|
|
(<span class="since">since 4.3.0</span>)
|
|
</li>
|
|
</ul>
|
|
<p>
|
|
The root controllers (<code>pci-root</code>
|
|
and <code>pcie-root</code>) have an
|
|
optional <code>pcihole64</code> element specifying how big (in
|
|
kilobytes, or in the unit specified by <code>pcihole64</code>'s
|
|
<code>unit</code> attribute) the 64-bit PCI hole should be. Some guests (like
|
|
Windows XP or Windows Server 2003) might crash when QEMU and Seabios
|
|
are recent enough to support 64-bit PCI holes, unless this is disabled
|
|
(set to 0). <span class="since">Since 1.1.2 (QEMU only)</span>
|
|
</p>
|
|
<p>
|
|
PCI controllers also have an optional
|
|
subelement <code><model></code> with an attribute
|
|
<code>name</code>. The name attribute holds the name of the
|
|
specific device that qemu is emulating (e.g. "i82801b11-bridge")
|
|
rather than simply the class of device ("pcie-to-pci-bridge",
|
|
"pci-bridge"), which is set in the controller element's
|
|
model <b>attribute</b>. In almost all cases, you should not
|
|
manually add a <code><model></code> subelement to a
|
|
controller, nor should you modify one that is automatically
|
|
generated by libvirt. <span class="since">Since 1.2.19 (QEMU
|
|
only).</span>
|
|
</p>
|
|
<p>
|
|
PCI controllers also have an optional
|
|
subelement <code><target></code> with the attributes and
|
|
subelements listed below. These are configurable items that 1)
|
|
are visible to the guest OS so must be preserved for guest ABI
|
|
compatibility, and 2) are usually left to default values or
|
|
derived automatically by libvirt. In almost all cases, you
|
|
should not manually add a <code><target></code> subelement
|
|
to a controller, nor should you modify the values in the those
|
|
that are automatically generated by
|
|
libvirt. <span class="since">Since 1.2.19 (QEMU only).</span>
|
|
</p>
|
|
<dl>
|
|
<dt><code>chassisNr</code></dt>
|
|
<dd>
|
|
PCI controllers that have attribute model="pci-bridge", can
|
|
also have a <code>chassisNr</code> attribute in
|
|
the <code><target></code> subelement, which is used to
|
|
control QEMU's "chassis_nr" option for the pci-bridge device
|
|
(normally libvirt automatically sets this to the same value as
|
|
the index attribute of the pci controller). If set, chassisNr
|
|
must be between 1 and 255.
|
|
</dd>
|
|
<dt><code>chassis</code></dt>
|
|
<dd>
|
|
pcie-root-port and pcie-switch-downstream-port controllers can
|
|
also have a <code>chassis</code> attribute in
|
|
the <code><target></code> subelement, which is used to
|
|
set the controller's "chassis" configuration value, which is
|
|
visible to the virtual machine. If set, chassis must be
|
|
between 0 and 255.
|
|
</dd>
|
|
<dt><code>port</code></dt>
|
|
<dd>
|
|
pcie-root-port and pcie-switch-downstream-port controllers can
|
|
also have a <code>port</code> attribute in
|
|
the <code><target></code> subelement, which
|
|
is used to set the controller's "port" configuration value,
|
|
which is visible to the virtual machine. If set, port must be
|
|
between 0 and 255.
|
|
</dd>
|
|
<dt><code>busNr</code></dt>
|
|
<dd>
|
|
pci-expander-bus and pcie-expander-bus controllers can have an
|
|
optional <code>busNr</code> attribute (1-254). This will be
|
|
the bus number of the new bus; All bus numbers between that
|
|
specified and 255 will be available only for assignment to
|
|
PCI/PCIe controllers plugged into the hierarchy starting with
|
|
this expander bus, and bus numbers less than the specified
|
|
value will be available to the next lower expander-bus (or the
|
|
root-bus if there are no lower expander buses). If you do not
|
|
specify a busNumber, libvirt will find the lowest existing
|
|
busNumber in all other expander buses (or use 256 if there are
|
|
no others) and auto-assign the busNr of that found bus - 2,
|
|
which provides one bus number for the pci-expander-bus and one
|
|
for the pci-bridge that is automatically attached to it (if
|
|
you plan on adding more pci-bridges to the hierarchy of the
|
|
bus, you should manually set busNr to a lower value).
|
|
<p>
|
|
A similar algorithm is used for automatically determining
|
|
the busNr attribute for pcie-expander-bus, but since the
|
|
pcie-expander-bus doesn't have any built-in pci-bridge, the
|
|
2nd bus-number is just being reserved for the pcie-root-port
|
|
that must necessarily be connected to the bus in order to
|
|
actually plug in an endpoint device. If you intend to plug
|
|
multiple devices into a pcie-expander-bus, you must connect
|
|
a pcie-switch-upstream-port to the pcie-root-port that is
|
|
plugged into the pcie-expander-bus, and multiple
|
|
pcie-switch-downstream-ports to the
|
|
pcie-switch-upstream-port, and of course for this to work
|
|
properly, you will need to decrease the pcie-expander-bus'
|
|
busNr accordingly so that there are enough unused bus
|
|
numbers above it to accommodate giving out one bus number for
|
|
the upstream-port and one for each downstream-port (in
|
|
addition to the pcie-root-port and the pcie-expander-bus
|
|
itself).
|
|
</p>
|
|
</dd>
|
|
<dt><code>node</code></dt>
|
|
<dd>
|
|
Some PCI controllers (<code>pci-expander-bus</code> for the pc
|
|
machine type, <code>pcie-expander-bus</code> for the q35 machine
|
|
type and, <span class="since">since 3.6.0</span>,
|
|
<code>pci-root</code> for the pseries machine type) can have an
|
|
optional <code><node></code> subelement within
|
|
the <code><target></code> subelement, which is used to
|
|
set the NUMA node reported to the guest OS for that bus - the
|
|
guest OS will then know that all devices on that bus are a
|
|
part of the specified NUMA node (it is up to the user of the
|
|
libvirt API to attach host devices to the correct
|
|
pci-expander-bus when assigning them to the domain).
|
|
</dd>
|
|
<dt><code>index</code></dt>
|
|
<dd>
|
|
pci-root controllers for pSeries guests use this attribute to
|
|
record the order they will show up in the guest.
|
|
<span class="since">Since 3.6.0</span>
|
|
</dd>
|
|
</dl>
|
|
<p>
|
|
For machine types which provide an implicit PCI bus, the pci-root
|
|
controller with index=0 is auto-added and required to use PCI devices.
|
|
pci-root has no address.
|
|
PCI bridges are auto-added if there are too many devices to fit on
|
|
the one bus provided by pci-root, or a PCI bus number greater than zero
|
|
was specified.
|
|
PCI bridges can also be specified manually, but their addresses should
|
|
only refer to PCI buses provided by already specified PCI controllers.
|
|
Leaving gaps in the PCI controller indexes might lead to an invalid
|
|
configuration.
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<controller type='pci' index='0' model='pci-root'/>
|
|
<controller type='pci' index='1' model='pci-bridge'>
|
|
<address type='pci' domain='0' bus='0' slot='5' function='0' multifunction='off'/>
|
|
</controller>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
For machine types which provide an implicit PCI Express (PCIe)
|
|
bus (for example, the machine types based on the Q35 chipset),
|
|
the pcie-root controller with index=0 is auto-added to the
|
|
domain's configuration. pcie-root has also no address, provides
|
|
31 slots (numbered 1-31) that can be used to attach PCIe or PCI
|
|
devices (although libvirt will never auto-assign a PCI device to
|
|
a PCIe slot, it will allow manual specification of such an
|
|
assignment). Devices connected to pcie-root cannot be
|
|
hotplugged. If traditional PCI devices are present in the guest
|
|
configuration, a <code>pcie-to-pci-bridge</code> controller will
|
|
automatically be added: this controller, which plugs into a
|
|
<code>pcie-root-port</code>, provides 31 usable PCI slots (1-31) with
|
|
hotplug support (<span class="since">since 4.3.0</span>). If the QEMU
|
|
binary doesn't support the corresponding device, then a
|
|
<code>dmi-to-pci-bridge</code> controller will be added instead,
|
|
usually at the defacto standard location of slot=0x1e. A
|
|
dmi-to-pci-bridge controller plugs into a PCIe slot (as provided
|
|
by pcie-root), and itself provides 31 standard PCI slots (which
|
|
also do not support device hotplug). In order to have
|
|
hot-pluggable PCI slots in the guest system, a pci-bridge
|
|
controller will also be automatically created and connected to
|
|
one of the slots of the auto-created dmi-to-pci-bridge
|
|
controller; all guest PCI devices with addresses that are
|
|
auto-determined by libvirt will be placed on this pci-bridge
|
|
device. (<span class="since">since 1.1.2</span>).
|
|
</p>
|
|
<p>
|
|
Domains with an implicit pcie-root can also add controllers
|
|
with <code>model='pcie-root-port'</code>,
|
|
<code>model='pcie-switch-upstream-port'</code>,
|
|
and <code>model='pcie-switch-downstream-port'</code>. pcie-root-port
|
|
is a simple type of bridge device that can connect only to one
|
|
of the 31 slots on the pcie-root bus on its upstream side, and
|
|
makes a single (PCIe, hotpluggable) port available on the
|
|
downstream side (at slot='0'). pcie-root-port can be used to
|
|
provide a single slot to later hotplug a PCIe device (but is not
|
|
itself hotpluggable - it must be in the configuration when the
|
|
domain is started).
|
|
(<span class="since">since 1.2.19</span>)
|
|
</p>
|
|
<p>
|
|
pcie-switch-upstream-port is a more flexible (but also more
|
|
complex) device that can only plug into a pcie-root-port or
|
|
pcie-switch-downstream-port on the upstream side (and only
|
|
before the domain is started - it is not hot-pluggable), and
|
|
provides 32 ports on the downstream side (slot='0' - slot='31')
|
|
that accept only pcie-switch-downstream-port devices; each
|
|
pcie-switch-downstream-port device can only plug into a
|
|
pcie-switch-upstream-port on its upstream side (again, not
|
|
hot-pluggable), and on its downstream side provides a single
|
|
hotpluggable pcie port that can accept any standard pci or pcie
|
|
device (or another pcie-switch-upstream-port), i.e. identical in
|
|
function to a pcie-root-port. (<span class="since">since
|
|
1.2.19</span>)
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<controller type='pci' index='0' model='pcie-root'/>
|
|
<controller type='pci' index='1' model='pcie-root-port'>
|
|
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/>
|
|
</controller>
|
|
<controller type='pci' index='2' model='pcie-to-pci-bridge'>
|
|
<address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
|
|
</controller>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h4><a id="elementsLease">Device leases</a></h4>
|
|
|
|
<p>
|
|
When using a lock manager, it may be desirable to record device leases
|
|
against a VM. The lock manager will ensure the VM won't start unless
|
|
the leases can be acquired.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
...
|
|
<lease>
|
|
<lockspace>somearea</lockspace>
|
|
<key>somekey</key>
|
|
<target path='/some/lease/path' offset='1024'/>
|
|
</lease>
|
|
...
|
|
</devices>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>lockspace</code></dt>
|
|
<dd>This is an arbitrary string, identifying the lockspace
|
|
within which the key is held. Lock managers may impose
|
|
extra restrictions on the format, or length of the lockspace
|
|
name.</dd>
|
|
<dt><code>key</code></dt>
|
|
<dd>This is an arbitrary string, uniquely identifying the
|
|
lease to be acquired. Lock managers may impose extra
|
|
restrictions on the format, or length of the key.
|
|
</dd>
|
|
<dt><code>target</code></dt>
|
|
<dd>This is the fully qualified path of the file associated
|
|
with the lockspace. The offset specifies where the lease
|
|
is stored within the file. If the lock manager does not
|
|
require an offset, just pass 0.
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsHostDev">Host device assignment</a></h4>
|
|
|
|
<h5><a id="elementsHostDevSubsys">USB / PCI / SCSI devices</a></h5>
|
|
|
|
<p>
|
|
USB, PCI and SCSI devices attached to the host can be passed through
|
|
to the guest using the <code>hostdev</code> element.
|
|
<span class="since">since after 0.4.4 for USB, 0.6.0 for PCI (KVM only)
|
|
and 1.0.6 for SCSI (KVM only)</span>:
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<hostdev mode='subsystem' type='usb'>
|
|
<source startupPolicy='optional'>
|
|
<vendor id='0x1234'/>
|
|
<product id='0xbeef'/>
|
|
</source>
|
|
<boot order='2'/>
|
|
</hostdev>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>or:</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<hostdev mode='subsystem' type='pci' managed='yes'>
|
|
<source>
|
|
<address domain='0x0000' bus='0x06' slot='0x02' function='0x0'/>
|
|
</source>
|
|
<boot order='1'/>
|
|
<rom bar='on' file='/etc/fake/boot.bin'/>
|
|
</hostdev>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>or:</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<hostdev mode='subsystem' type='scsi' sgio='filtered' rawio='yes'>
|
|
<source>
|
|
<adapter name='scsi_host0'/>
|
|
<address bus='0' target='0' unit='0'/>
|
|
</source>
|
|
<readonly/>
|
|
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
|
|
</hostdev>
|
|
</devices>
|
|
...</pre>
|
|
|
|
|
|
<p>or:</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<hostdev mode='subsystem' type='scsi'>
|
|
<source protocol='iscsi' name='iqn.2014-08.com.example:iscsi-nopool/1'>
|
|
<host name='example.com' port='3260'/>
|
|
<auth username='myuser'>
|
|
<secret type='iscsi' usage='libvirtiscsi'/>
|
|
</auth>
|
|
</source>
|
|
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
|
|
</hostdev>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>or:</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<hostdev mode='subsystem' type='scsi_host'>
|
|
<source protocol='vhost' wwpn='naa.50014057667280d8'/>
|
|
</hostdev>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>or:</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<hostdev mode='subsystem' type='mdev' model='vfio-pci'>
|
|
<source>
|
|
<address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'/>
|
|
</source>
|
|
</hostdev>
|
|
<hostdev mode='subsystem' type='mdev' model='vfio-ccw'>
|
|
<source>
|
|
<address uuid='9063cba3-ecef-47b6-abcf-3fef4fdcad85'/>
|
|
</source>
|
|
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0001'/>
|
|
</hostdev>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>hostdev</code></dt>
|
|
<dd>The <code>hostdev</code> element is the main container for describing
|
|
host devices. For each device, the <code>mode</code> is always
|
|
"subsystem" and the <code>type</code> is one of the following values
|
|
with additional attributes noted.
|
|
<dl>
|
|
<dt><code>usb</code></dt>
|
|
<dd>USB devices are detached from the host on guest startup
|
|
and reattached after the guest exits or the device is
|
|
hot-unplugged.
|
|
</dd>
|
|
<dt><code>pci</code></dt>
|
|
<dd>For PCI devices, when <code>managed</code> is "yes" it is
|
|
detached from the host before being passed on to the guest
|
|
and reattached to the host after the guest exits. If
|
|
<code>managed</code> is omitted or "no", the user is
|
|
responsible to call <code>virNodeDeviceDetachFlags</code>
|
|
(or <code>virsh nodedev-detach</code> before starting the guest
|
|
or hot-plugging the device and <code>virNodeDeviceReAttach</code>
|
|
(or <code>virsh nodedev-reattach</code>) after hot-unplug or
|
|
stopping the guest.
|
|
</dd>
|
|
<dt><code>scsi</code></dt>
|
|
<dd>For SCSI devices, user is responsible to make sure the device
|
|
is not used by host. If supported by the hypervisor and OS, the
|
|
optional <code>sgio</code> (<span class="since">since 1.0.6</span>)
|
|
attribute indicates whether unprivileged SG_IO commands are
|
|
filtered for the disk. Valid settings are "filtered" or
|
|
"unfiltered", where the default is "filtered".
|
|
The optional <code>rawio</code>
|
|
(<span class="since">since 1.2.9</span>) attribute indicates
|
|
whether the lun needs the rawio capability. Valid settings are
|
|
"yes" or "no". See the rawio description within the
|
|
<a href="#elementsDisks">disk</a> section.
|
|
If a disk lun in the domain already has the rawio capability,
|
|
then this setting not required.
|
|
</dd>
|
|
<dt><code>scsi_host</code></dt>
|
|
<dd><span class="since">since 2.5.0</span>For SCSI devices, user
|
|
is responsible to make sure the device is not used by host. This
|
|
<code>type</code> passes all LUNs presented by a single HBA to
|
|
the guest. <span class="since">Since 5.2.0,</span> the
|
|
<code>model</code> attribute can be specified further
|
|
with "virtio-transitional", "virtio-non-transitional", or
|
|
"virtio". See
|
|
<a href="#elementsVirtioTransitional">Virtio transitional devices</a>
|
|
for more details.
|
|
</dd>
|
|
<dt><code>mdev</code></dt>
|
|
<dd>For mediated devices (<span class="since">Since 3.2.0</span>)
|
|
the <code>model</code> attribute specifies the device API which
|
|
determines how the host's vfio driver will expose the device to the
|
|
guest. Currently, <code>model='vfio-pci'</code>,
|
|
<code>model='vfio-ccw'</code> (<span class="since">Since 4.4.0</span>)
|
|
and <code>model='vfio-ap'</code> (<span class="since">Since 4.9.0</span>)
|
|
is supported. <a href="drvnodedev.html#MDEV">MDEV</a> section
|
|
provides more information about mediated devices as well as how to
|
|
create mediated devices on the host.
|
|
<span class="since">Since 4.6.0 (QEMU 2.12)</span> an optional
|
|
<code>display</code> attribute may be used to enable or disable
|
|
support for an accelerated remote desktop backed by a mediated
|
|
device (such as NVIDIA vGPU or Intel GVT-g) as an alternative to
|
|
emulated <a href="#elementsVideo">video devices</a>. This attribute
|
|
is limited to <code>model='vfio-pci'</code> only. Supported values
|
|
are either <code>on</code> or <code>off</code> (default is 'off').
|
|
It is required to use a
|
|
<a href="#elementsGraphics">graphical framebuffer</a> in order to
|
|
use this attribute, currently only supported with VNC, Spice and
|
|
egl-headless graphics devices.
|
|
<p>
|
|
Note: There are also some implications on the usage of guest's
|
|
address type depending on the <code>model</code> attribute,
|
|
see the <code>address</code> element below.
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
<p>
|
|
Note: The <code>managed</code> attribute is only used with
|
|
<code>type='pci'</code> and is ignored by all the other device types,
|
|
thus setting <code>managed</code> explicitly with other than a PCI
|
|
device has the same effect as omitting it. Similarly,
|
|
<code>model</code> attribute is only supported by mediated devices and
|
|
ignored by all other device types.
|
|
</p>
|
|
</dd>
|
|
<dt><code>source</code></dt>
|
|
<dd>The source element describes the device as seen from the host using
|
|
the following mechanism to describe:
|
|
<dl>
|
|
<dt><code>usb</code></dt>
|
|
<dd>The USB device can either be addressed by vendor / product id
|
|
using the <code>vendor</code> and <code>product</code> elements
|
|
or by the device's address on the host using the
|
|
<code>address</code> element.
|
|
<p>
|
|
<span class="since">Since 1.0.0</span>, the <code>source</code>
|
|
element of USB devices may contain <code>startupPolicy</code>
|
|
attribute which can be used to define policy what to do if the
|
|
specified host USB device is not found. The attribute accepts
|
|
the following values:
|
|
</p>
|
|
<table class="top_table">
|
|
<tr>
|
|
<td> mandatory </td>
|
|
<td> fail if missing for any reason (the default) </td>
|
|
</tr>
|
|
<tr>
|
|
<td> requisite </td>
|
|
<td> fail if missing on boot up,
|
|
drop if missing on migrate/restore/revert </td>
|
|
</tr>
|
|
<tr>
|
|
<td> optional </td>
|
|
<td> drop if missing at any start attempt </td>
|
|
</tr>
|
|
</table>
|
|
</dd>
|
|
<dt><code>pci</code></dt>
|
|
<dd>PCI devices can only be described by their <code>address</code>.
|
|
</dd>
|
|
<dt><code>scsi</code></dt>
|
|
<dd>SCSI devices are described by both the <code>adapter</code>
|
|
and <code>address</code> elements. The <code>address</code>
|
|
element includes a <code>bus</code> attribute (a 2-digit bus
|
|
number), a <code>target</code> attribute (a 10-digit target
|
|
number), and a <code>unit</code> attribute (a 20-digit unit
|
|
number on the bus). Not all hypervisors support larger
|
|
<code>target</code> and <code>unit</code> values. It is up
|
|
to each hypervisor to determine the maximum value supported
|
|
for the adapter.
|
|
<p>
|
|
<span class="since">Since 1.2.8</span>, the <code>source</code>
|
|
element of a SCSI device may contain the <code>protocol</code>
|
|
attribute. When the attribute is set to "iscsi", the host
|
|
device XML follows the network <a href="#elementsDisks">disk</a>
|
|
device using the same <code>name</code> attribute and optionally
|
|
using the <code>auth</code> element to provide the authentication
|
|
credentials to the iSCSI server.
|
|
</p>
|
|
</dd>
|
|
<dt><code>scsi_host</code></dt>
|
|
<dd><span class="since">Since 2.5.0</span>, multiple LUNs behind a
|
|
single SCSI HBA are described by a <code>protocol</code>
|
|
attribute set to "vhost" and a <code>wwpn</code> attribute that
|
|
is the vhost_scsi wwpn (16 hexadecimal digits with a prefix of
|
|
"naa.") established in the host configfs.
|
|
</dd>
|
|
<dt><code>mdev</code></dt>
|
|
<dd>Mediated devices (<span class="since">Since 3.2.0</span>) are
|
|
described by the <code>address</code> element. The
|
|
<code>address</code> element contains a single mandatory attribute
|
|
<code>uuid</code>.
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>vendor</code>, <code>product</code></dt>
|
|
<dd>The <code>vendor</code> and <code>product</code> elements each have an
|
|
<code>id</code> attribute that specifies the USB vendor and product id.
|
|
The ids can be given in decimal, hexadecimal (starting with 0x) or
|
|
octal (starting with 0) form.</dd>
|
|
<dt><code>boot</code></dt>
|
|
<dd>Specifies that the device is bootable. The <code>order</code>
|
|
attribute determines the order in which devices will be tried during
|
|
boot sequence. The per-device <code>boot</code> elements cannot be
|
|
used together with general boot elements in
|
|
<a href="#elementsOSBIOS">BIOS bootloader</a> section.
|
|
<span class="since">Since 0.8.8</span> for PCI devices,
|
|
<span class="since">Since 1.0.1</span> for USB devices.
|
|
</dd>
|
|
<dt><code>rom</code></dt>
|
|
<dd>The <code>rom</code> element is used to change how a PCI
|
|
device's ROM is presented to the guest. The optional <code>bar</code>
|
|
attribute can be set to "on" or "off", and determines whether
|
|
or not the device's ROM will be visible in the guest's memory
|
|
map. (In PCI documentation, the "rombar" setting controls the
|
|
presence of the Base Address Register for the ROM). If no rom
|
|
bar is specified, the qemu default will be used (older
|
|
versions of qemu used a default of "off", while newer qemus
|
|
have a default of "on"). <span class="since">Since
|
|
0.9.7 (QEMU and KVM only)</span>. The optional
|
|
<code>file</code> attribute contains an absolute path to a binary file
|
|
to be presented to the guest as the device's ROM BIOS. This
|
|
can be useful, for example, to provide a PXE boot ROM for a
|
|
virtual function of an sr-iov capable ethernet device (which
|
|
has no boot ROMs for the VFs).
|
|
<span class="since">Since 0.9.10 (QEMU and KVM only)</span>.
|
|
The optional <code>enabled</code> attribute can be set to
|
|
<code>no</code> to disable PCI ROM loading completely for the device;
|
|
if PCI ROM loading is disabled through this attribute, attempts to
|
|
tweak the loading process further using the <code>bar</code> or
|
|
<code>file</code> attributes will be rejected.
|
|
<span class="since">Since 4.3.0 (QEMU and KVM only)</span>.
|
|
</dd>
|
|
<dt><code>address</code></dt>
|
|
<dd>The <code>address</code> element for USB devices has a
|
|
<code>bus</code> and <code>device</code> attribute to specify the
|
|
USB bus and device number the device appears at on the host.
|
|
The values of these attributes can be given in decimal, hexadecimal
|
|
(starting with 0x) or octal (starting with 0) form.
|
|
For PCI devices the element carries 4 attributes allowing to designate
|
|
the device as can be found with the <code>lspci</code> or
|
|
with <code>virsh nodedev-list</code>. For SCSI devices a 'drive'
|
|
address type must be used. For mediated devices, which are software-only
|
|
devices defining an allocation of resources on the physical parent device,
|
|
the address type used must conform to the <code>model</code> attribute
|
|
of element <code>hostdev</code>, e.g. any address type other than PCI for
|
|
<code>vfio-pci</code> device API or any address type other than CCW for
|
|
<code>vfio-ccw</code> device API will result in an error.
|
|
<a href="#elementsAddress">See above</a> for more details on the address
|
|
element.</dd>
|
|
<dt><code>driver</code></dt>
|
|
<dd>
|
|
PCI devices can have an optional <code>driver</code>
|
|
subelement that specifies which backend driver to use for PCI
|
|
device assignment. Use the <code>name</code> attribute to
|
|
select either "vfio" (for the new VFIO device assignment
|
|
backend, which is compatible with UEFI SecureBoot) or "kvm"
|
|
(the legacy device assignment handled directly by the KVM
|
|
kernel module)<span class="since">Since 1.0.5 (QEMU and KVM
|
|
only, requires kernel 3.6 or newer)</span>. When specified,
|
|
device assignment will fail if the requested method of device
|
|
assignment isn't available on the host. When not specified,
|
|
the default is "vfio" on systems where the VFIO driver is
|
|
available and loaded, and "kvm" on older systems, or those
|
|
where the VFIO driver hasn't been
|
|
loaded <span class="since">Since 1.1.3</span> (prior to that
|
|
the default was always "kvm").
|
|
</dd>
|
|
<dt><code>readonly</code></dt>
|
|
<dd>Indicates that the device is readonly, only supported by SCSI host
|
|
device now. <span class="since">Since 1.0.6 (QEMU and KVM only)</span>
|
|
</dd>
|
|
<dt><code>shareable</code></dt>
|
|
<dd>If present, this indicates the device is expected to be shared
|
|
between domains (assuming the hypervisor and OS support this).
|
|
Only supported by SCSI host device.
|
|
<span class="since">Since 1.0.6</span>
|
|
<p>
|
|
Note: Although <code>shareable</code> was introduced
|
|
<span class="since">in 1.0.6</span>, it did not work as
|
|
as expected until <span class="since">1.2.2</span>.
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
|
|
|
|
<h5><a id="elementsHostDevCaps">Block / character devices</a></h5>
|
|
|
|
<p>
|
|
Block / character devices from the host can be passed through
|
|
to the guest using the <code>hostdev</code> element. This is
|
|
only possible with container based virtualization. Devices are specified
|
|
by a fully qualified path.
|
|
<span class="since">since after 1.0.1 for LXC</span>:
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<hostdev mode='capabilities' type='storage'>
|
|
<source>
|
|
<block>/dev/sdf1</block>
|
|
</source>
|
|
</hostdev>
|
|
...
|
|
</pre>
|
|
|
|
<pre>
|
|
...
|
|
<hostdev mode='capabilities' type='misc'>
|
|
<source>
|
|
<char>/dev/input/event3</char>
|
|
</source>
|
|
</hostdev>
|
|
...
|
|
</pre>
|
|
|
|
<pre>
|
|
...
|
|
<hostdev mode='capabilities' type='net'>
|
|
<source>
|
|
<interface>eth0</interface>
|
|
</source>
|
|
</hostdev>
|
|
...
|
|
</pre>
|
|
|
|
<dl>
|
|
<dt><code>hostdev</code></dt>
|
|
<dd>The <code>hostdev</code> element is the main container for describing
|
|
host devices. For block/character device passthrough <code>mode</code> is
|
|
always "capabilities" and <code>type</code> is "storage" for a block
|
|
device, "misc" for a character device and "net" for a host network
|
|
interface.
|
|
</dd>
|
|
<dt><code>source</code></dt>
|
|
<dd>The source element describes the device as seen from the host.
|
|
For block devices, the path to the block device in the host
|
|
OS is provided in the nested "block" element, while for character
|
|
devices the "char" element is used. For network interfaces, the
|
|
name of the interface is provided in the "interface" element.
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsRedir">Redirected devices</a></h4>
|
|
|
|
<p>
|
|
USB device redirection through a character device is
|
|
supported <span class="since">since after 0.9.5 (KVM
|
|
only)</span>:
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<redirdev bus='usb' type='tcp'>
|
|
<source mode='connect' host='localhost' service='4000'/>
|
|
<boot order='1'/>
|
|
</redirdev>
|
|
<redirfilter>
|
|
<usbdev class='0x08' vendor='0x1234' product='0xbeef' version='2.56' allow='yes'/>
|
|
<usbdev allow='no'/>
|
|
</redirfilter>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>redirdev</code></dt>
|
|
<dd>The <code>redirdev</code> element is the main container for
|
|
describing redirected devices. <code>bus</code> must be "usb"
|
|
for a USB device.
|
|
|
|
An additional attribute <code>type</code> is required,
|
|
matching one of the
|
|
supported <a href="#elementsConsole">serial device</a> types,
|
|
to describe the host side of the
|
|
tunnel; <code>type='tcp'</code>
|
|
or <code>type='spicevmc'</code> (which uses the usbredir
|
|
channel of a <a href="#elementsGraphics">SPICE graphics
|
|
device</a>) are typical. The redirdev element has an optional
|
|
sub-element <code><address></code> which can tie the
|
|
device to a particular controller. Further sub-elements,
|
|
such as <code><source></code>, may be required according
|
|
to the given type, although a <code><target></code> sub-element
|
|
is not required (since the consumer of the character device is
|
|
the hypervisor itself, rather than a device visible in the guest).
|
|
</dd>
|
|
<dt><code>boot</code></dt>
|
|
|
|
<dd>Specifies that the device is bootable.
|
|
The <code>order</code> attribute determines the order in which
|
|
devices will be tried during boot sequence. The per-device
|
|
<code>boot</code> elements cannot be used together with general
|
|
boot elements in <a href="#elementsOSBIOS">BIOS bootloader</a> section.
|
|
(<span class="since">Since 1.0.1</span>)
|
|
</dd>
|
|
<dt><code>redirfilter</code></dt>
|
|
<dd>The<code> redirfilter </code>element is used for creating the
|
|
filter rule to filter out certain devices from redirection.
|
|
It uses sub-element <code><usbdev></code> to define each filter rule.
|
|
<code>class</code> attribute is the USB Class code, for example,
|
|
0x08 represents mass storage devices. The USB device can be addressed by
|
|
vendor / product id using the <code>vendor</code> and <code>product</code> attributes.
|
|
<code>version</code> is the device revision from the bcdDevice field (not
|
|
the version of the USB protocol).
|
|
These four attributes are optional and <code>-1</code> can be used to allow
|
|
any value for them. <code>allow</code> attribute is mandatory,
|
|
'yes' means allow, 'no' for deny.
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsSmartcard">Smartcard devices</a></h4>
|
|
|
|
<p>
|
|
A virtual smartcard device can be supplied to the guest via the
|
|
<code>smartcard</code> element. A USB smartcard reader device on
|
|
the host cannot be used on a guest with simple device
|
|
passthrough, since it will then not be available on the host,
|
|
possibly locking the host computer when it is "removed".
|
|
Therefore, some hypervisors provide a specialized virtual device
|
|
that can present a smartcard interface to the guest, with
|
|
several modes for describing how credentials are obtained from
|
|
the host or even a from a channel created to a third-party
|
|
smartcard provider. <span class="since">Since 0.8.8</span>
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<smartcard mode='host'/>
|
|
<smartcard mode='host-certificates'>
|
|
<certificate>cert1</certificate>
|
|
<certificate>cert2</certificate>
|
|
<certificate>cert3</certificate>
|
|
<database>/etc/pki/nssdb/</database>
|
|
</smartcard>
|
|
<smartcard mode='passthrough' type='tcp'>
|
|
<source mode='bind' host='127.0.0.1' service='2001'/>
|
|
<protocol type='raw'/>
|
|
<address type='ccid' controller='0' slot='0'/>
|
|
</smartcard>
|
|
<smartcard mode='passthrough' type='spicevmc'/>
|
|
</devices>
|
|
...
|
|
</pre>
|
|
|
|
<p>
|
|
The <code><smartcard></code> element has a mandatory
|
|
attribute <code>mode</code>. The following modes are supported;
|
|
in each mode, the guest sees a device on its USB bus that
|
|
behaves like a physical USB CCID (Chip/Smart Card Interface
|
|
Device) card.
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>host</code></dt>
|
|
<dd>The simplest operation, where the hypervisor relays all
|
|
requests from the guest into direct access to the host's
|
|
smartcard via NSS. No other attributes or sub-elements are
|
|
required. See below about the use of an
|
|
optional <code><address></code> sub-element.</dd>
|
|
|
|
<dt><code>host-certificates</code></dt>
|
|
<dd>Rather than requiring a smartcard to be plugged into the
|
|
host, it is possible to provide three NSS certificate names
|
|
residing in a database on the host. These certificates can be
|
|
generated via the command <code>certutil -d /etc/pki/nssdb -x -t
|
|
CT,CT,CT -S -s CN=cert1 -n cert1</code>, and the resulting three
|
|
certificate names must be supplied as the content of each of
|
|
three <code><certificate></code> sub-elements. An
|
|
additional sub-element <code><database></code> can specify
|
|
the absolute path to an alternate directory (matching
|
|
the <code>-d</code> option of the <code>certutil</code> command
|
|
when creating the certificates); if not present, it defaults to
|
|
/etc/pki/nssdb.</dd>
|
|
|
|
<dt><code>passthrough</code></dt>
|
|
<dd>Rather than having the hypervisor directly communicate with
|
|
the host, it is possible to tunnel all requests through a
|
|
secondary character device to a third-party provider (which may
|
|
in turn be talking to a smartcard or using three certificate
|
|
files). In this mode of operation, an additional
|
|
attribute <code>type</code> is required, matching one of the
|
|
supported <a href="#elementsConsole">serial device</a> types, to
|
|
describe the host side of the tunnel; <code>type='tcp'</code>
|
|
or <code>type='spicevmc'</code> (which uses the smartcard
|
|
channel of a <a href="#elementsGraphics">SPICE graphics
|
|
device</a>) are typical. Further sub-elements, such
|
|
as <code><source></code>, may be required according to the
|
|
given type, although a <code><target></code> sub-element
|
|
is not required (since the consumer of the character device is
|
|
the hypervisor itself, rather than a device visible in the
|
|
guest).</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
Each mode supports an optional
|
|
sub-element <code><address></code>, which fine-tunes the
|
|
correlation between the smartcard and a ccid bus
|
|
controller, <a href="#elementsAddress">documented above</a>.
|
|
For now, qemu only supports at most one
|
|
smartcard, with an address of bus=0 slot=0.
|
|
</p>
|
|
|
|
<h4><a id="elementsNICS">Network interfaces</a></h4>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='direct' trustGuestRxFilters='yes'>
|
|
<source dev='eth0'/>
|
|
<mac address='52:54:00:5d:c7:9e'/>
|
|
<boot order='1'/>
|
|
<rom bar='off'/>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
There are several possibilities for specifying a network
|
|
interface visible to the guest. Each subsection below provides
|
|
more details about common setup options.
|
|
</p>
|
|
<p>
|
|
<span class="since">Since 1.2.10</span>),
|
|
the <code>interface</code> element
|
|
property <code>trustGuestRxFilters</code> provides the
|
|
capability for the host to detect and trust reports from the
|
|
guest regarding changes to the interface mac address and receive
|
|
filters by setting the attribute to <code>yes</code>. The default
|
|
setting for the attribute is <code>no</code> for security
|
|
reasons and support depends on the guest network device model as
|
|
well as the type of connection on the host - currently it is
|
|
only supported for the virtio device model and for macvtap
|
|
connections on the host.
|
|
</p>
|
|
<p>
|
|
Each <code><interface></code> element has an
|
|
optional <code><address></code> sub-element that can tie
|
|
the interface to a particular pci slot, with
|
|
attribute <code>type='pci'</code>
|
|
as <a href="#elementsAddress">documented above</a>.
|
|
</p>
|
|
|
|
<h5><a id="elementsNICSVirtual">Virtual network</a></h5>
|
|
|
|
<p>
|
|
<strong><em>
|
|
This is the recommended config for general guest connectivity on
|
|
hosts with dynamic / wireless networking configs (or multi-host
|
|
environments where the host hardware details are described
|
|
separately in a <code><network></code>
|
|
definition <span class="since">Since 0.9.4</span>).
|
|
</em></strong>
|
|
</p>
|
|
|
|
<p>
|
|
|
|
Provides a connection whose details are described by the named
|
|
network definition. Depending on the virtual network's "forward
|
|
mode" configuration, the network may be totally isolated
|
|
(no <code><forward></code> element given), NAT'ing to an
|
|
explicit network device or to the default route
|
|
(<code><forward mode='nat'></code>), routed with no NAT
|
|
(<code><forward mode='route'/></code>), or connected
|
|
directly to one of the host's network interfaces (via macvtap)
|
|
or bridge devices ((<code><forward
|
|
mode='bridge|private|vepa|passthrough'/></code> <span class="since">Since
|
|
0.9.4</span>)
|
|
</p>
|
|
<p>
|
|
For networks with a forward mode of bridge, private, vepa, and
|
|
passthrough, it is assumed that the host has any necessary DNS
|
|
and DHCP services already setup outside the scope of libvirt. In
|
|
the case of isolated, nat, and routed networks, DHCP and DNS are
|
|
provided on the virtual network by libvirt, and the IP range can
|
|
be determined by examining the virtual network config with
|
|
'<code>virsh net-dumpxml [networkname]</code>'. There is one
|
|
virtual network called 'default' setup out of the box which does
|
|
NAT'ing to the default route and has an IP range
|
|
of <code>192.168.122.0/255.255.255.0</code>. Each guest will
|
|
have an associated tun device created with a name of vnetN,
|
|
which can also be overridden with the <target> element
|
|
(see
|
|
<a href="#elementsNICSTargetOverride">overriding the target element</a>).
|
|
</p>
|
|
<p>
|
|
When the source of an interface is a network,
|
|
a <code>portgroup</code> can be specified along with the name of
|
|
the network; one network may have multiple portgroups defined,
|
|
with each portgroup containing slightly different configuration
|
|
information for different classes of network
|
|
connections. <span class="since">Since 0.9.4</span>.
|
|
</p>
|
|
<p>
|
|
When a guest is running an interface of type <code>network</code>
|
|
may include a <code>portid</code> attribute. This provides the UUID
|
|
of an associated virNetworkPortPtr object that records the association
|
|
between the domain interface and the network. This attribute is
|
|
read-only since port objects are create and deleted automatically
|
|
during startup and shutdown. <span class="since">Since 5.1.0</span>
|
|
</p>
|
|
<p>
|
|
Also, similar to <code>direct</code> network connections
|
|
(described below), a connection of type <code>network</code> may
|
|
specify a <code>virtualport</code> element, with configuration
|
|
data to be forwarded to a vepa (802.1Qbg) or 802.1Qbh compliant
|
|
switch (<span class="since">Since 0.8.2</span>), or to an
|
|
Open vSwitch virtual switch (<span class="since">Since
|
|
0.9.11</span>).
|
|
</p>
|
|
<p>
|
|
Since the actual type of switch may vary depending on the
|
|
configuration in the <code><network></code> on the host,
|
|
it is acceptable to omit the virtualport <code>type</code>
|
|
attribute, and specify attributes from multiple different
|
|
virtualport types (and also to leave out certain attributes); at
|
|
domain startup time, a complete <code><virtualport></code>
|
|
element will be constructed by merging together the type and
|
|
attributes defined in the network and the portgroup referenced
|
|
by the interface. The newly-constructed virtualport is a combination
|
|
of them. The attributes from lower virtualport can't make change
|
|
on the ones defined in higher virtualport.
|
|
Interface takes the highest priority, portgroup is lowest priority.
|
|
(<span class="since">Since 0.10.0</span>). For example, in order
|
|
to work properly with both an 802.1Qbh switch and an Open vSwitch
|
|
switch, you may choose to specify no type, but both
|
|
a <code>profileid</code> (in case the switch is 802.1Qbh) and
|
|
an <code>interfaceid</code> (in case the switch is Open vSwitch)
|
|
(you may also omit the other attributes, such as managerid,
|
|
typeid, or profileid, to be filled in from the
|
|
network's <code><virtualport></code>). If you want to
|
|
limit a guest to connecting only to certain types of switches,
|
|
you can specify the virtualport type, but still omit some/all of
|
|
the parameters - in this case if the host's network has a
|
|
different type of virtualport, connection of the interface will
|
|
fail.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
</interface>
|
|
...
|
|
<interface type='network'>
|
|
<source network='default' portgroup='engineering'/>
|
|
<target dev='vnet7'/>
|
|
<mac address="00:11:22:33:44:55"/>
|
|
<virtualport>
|
|
<parameters instanceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/>
|
|
</virtualport>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h5><a id="elementsNICSBridge">Bridge to LAN</a></h5>
|
|
|
|
<p>
|
|
<strong><em>
|
|
This is the recommended config for general guest connectivity on
|
|
hosts with static wired networking configs.
|
|
</em></strong>
|
|
</p>
|
|
|
|
<p>
|
|
Provides a bridge from the VM directly to the LAN. This assumes
|
|
there is a bridge device on the host which has one or more of the hosts
|
|
physical NICs enslaved. The guest VM will have an associated tun device
|
|
created with a name of vnetN, which can also be overridden with the
|
|
<target> element (see
|
|
<a href="#elementsNICSTargetOverride">overriding the target element</a>).
|
|
The tun device will be enslaved to the bridge. The IP range / network
|
|
configuration is whatever is used on the LAN. This provides the guest VM
|
|
full incoming & outgoing net access just like a physical machine.
|
|
</p>
|
|
<p>
|
|
On Linux systems, the bridge device is normally a standard Linux
|
|
host bridge. On hosts that support Open vSwitch, it is also
|
|
possible to connect to an Open vSwitch bridge device by adding
|
|
a <code><virtualport type='openvswitch'/></code> to the
|
|
interface definition. (<span class="since">Since
|
|
0.9.11</span>). The Open vSwitch type virtualport accepts two
|
|
parameters in its <code><parameters></code> element -
|
|
an <code>interfaceid</code> which is a standard uuid used to
|
|
uniquely identify this particular interface to Open vSwitch (if
|
|
you do not specify one, a random interfaceid will be generated
|
|
for you when you first define the interface), and an
|
|
optional <code>profileid</code> which is sent to Open vSwitch as
|
|
the interfaces "port-profile".
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
...
|
|
<interface type='bridge'>
|
|
<source bridge='br0'/>
|
|
</interface>
|
|
<interface type='bridge'>
|
|
<source bridge='br1'/>
|
|
<target dev='vnet7'/>
|
|
<mac address="00:11:22:33:44:55"/>
|
|
</interface>
|
|
<interface type='bridge'>
|
|
<source bridge='ovsbr'/>
|
|
<virtualport type='openvswitch'>
|
|
<parameters profileid='menial' interfaceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/>
|
|
</virtualport>
|
|
</interface>
|
|
...
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
On hosts that support Open vSwitch on the kernel side and have the
|
|
Midonet Host Agent configured, it is also possible to connect to the
|
|
'midonet' bridge device by adding a
|
|
<code><virtualport type='midonet'/></code> to the
|
|
interface definition. (<span class="since">Since
|
|
1.2.13</span>). The Midonet virtualport type requires an
|
|
<code>interfaceid</code> attribute in its
|
|
<code><parameters></code> element. This interface id is the UUID
|
|
that specifies which port in the virtual network topology will be bound
|
|
to the interface.
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
...
|
|
<interface type='bridge'>
|
|
<source bridge='br0'/>
|
|
</interface>
|
|
<interface type='bridge'>
|
|
<source bridge='br1'/>
|
|
<target dev='vnet7'/>
|
|
<mac address="00:11:22:33:44:55"/>
|
|
</interface>
|
|
<interface type='bridge'>
|
|
<source bridge='midonet'/>
|
|
<virtualport type='midonet'>
|
|
<parameters interfaceid='0b2d64da-3d0e-431e-afdd-804415d6ebbb'/>
|
|
</virtualport>
|
|
</interface>
|
|
...
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h5><a id="elementsNICSSlirp">Userspace SLIRP stack</a></h5>
|
|
|
|
<p>
|
|
Provides a virtual LAN with NAT to the outside world. The virtual
|
|
network has DHCP & DNS services and will give the guest VM addresses
|
|
starting from <code>10.0.2.15</code>. The default router will be
|
|
<code>10.0.2.2</code> and the DNS server will be <code>10.0.2.3</code>.
|
|
This networking is the only option for unprivileged users who need their
|
|
VMs to have outgoing access. <span class="since">Since 3.8.0</span>
|
|
it is possible to override the default network address by
|
|
including an <code>ip</code> element specifying an IPv4
|
|
address in its one mandatory attribute, <code>address</code>.
|
|
Optionally, a second <code>ip</code> element with a
|
|
<code>family</code> attribute set to "ipv6" can be
|
|
specified to add an IPv6 address to the interface.
|
|
<code>address</code>. Optionally, address
|
|
<code>prefix</code> can be specified.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='user'/>
|
|
...
|
|
<interface type='user'>
|
|
<mac address="00:11:22:33:44:55"/>
|
|
<ip family='ipv4' address='172.17.2.0' prefix='24'/>
|
|
<ip family='ipv6' address='2001:db8:ac10:fd01::' prefix='64'/>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
|
|
<h5><a id="elementsNICSEthernet">Generic ethernet connection</a></h5>
|
|
|
|
<p>
|
|
Provides a means to use a new or existing tap device (or veth
|
|
device pair, depening on the needs of the hypervisor driver)
|
|
that is partially or wholly setup external to libvirt (either
|
|
prior to the guest starting, or while the guest is being started
|
|
via an optional script specified in the config).
|
|
</p>
|
|
<p>
|
|
The name of the tap device can optionally be specified with
|
|
the <code>dev</code> attribute of the
|
|
<code><target></code> element. If no target dev is
|
|
specified, libvirt will create a new standard tap device with a
|
|
name of the pattern "vnetN", where "N" is replaced with a
|
|
number. If a target dev is specified and that device doesn't
|
|
exist, then a new standard tap device will be created with the
|
|
exact dev name given. If the specified target dev does exist,
|
|
then that existing device will be used. Usually some basic setup
|
|
of the device is done by libvirt, including setting a MAC
|
|
address, and the IFF_UP flag, but if the <code>dev</code> is a
|
|
pre-existing device, and the <code>managed</code> attribute of
|
|
the <code>target</code> element is also set to "no" (the default
|
|
value is "yes"), even this basic setup will not be performed -
|
|
libvirt will simply pass the device on to the hypervisor with no
|
|
setup at all. <span class="since">Since 5.7.0</span> Using
|
|
managed='no' with a pre-created tap device is useful because
|
|
it permits a virtual machine managed by an unprivileged libvirtd
|
|
to have emulated network devices based on tap devices.
|
|
</p>
|
|
<p>
|
|
After creating/opening the tap device, an optional shell script
|
|
(given in the <code>path</code> attribute of
|
|
the <code><script></code> element) will be run; this can
|
|
be used to do whatever extra host network integration is
|
|
required.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='ethernet'>
|
|
<script path='/etc/qemu-ifup-mynet'/>
|
|
</interface>
|
|
...
|
|
<interface type='ethernet'>
|
|
<target dev='mytap1' managed='no'/>
|
|
<model type='virtio'/>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h5><a id="elementsNICSDirect">Direct attachment to physical interface</a></h5>
|
|
|
|
<p>
|
|
Provides direct attachment of the virtual machine's NIC to the given
|
|
physical interface of the host.
|
|
<span class="since">Since 0.7.7 (QEMU and KVM only)</span><br/>
|
|
This setup requires the Linux macvtap
|
|
driver to be available. <span class="since">(Since Linux 2.6.34.)</span>
|
|
One of the modes 'vepa'
|
|
( <a href="http://www.ieee802.org/1/files/public/docs2009/new-evb-congdon-vepa-modular-0709-v01.pdf">
|
|
'Virtual Ethernet Port Aggregator'</a>), 'bridge' or 'private'
|
|
can be chosen for the operation mode of the macvtap device, 'vepa'
|
|
being the default mode. The individual modes cause the delivery of
|
|
packets to behave as follows:
|
|
</p>
|
|
<p>
|
|
If the model type is set to <code>virtio</code> and
|
|
interface's <code>trustGuestRxFilters</code> attribute is set
|
|
to <code>yes</code>, changes made to the interface mac address,
|
|
unicast/multicast receive filters, and vlan settings in the
|
|
guest will be monitored and propagated to the associated macvtap
|
|
device on the host (<span class="since">Since
|
|
1.2.10</span>). If <code>trustGuestRxFilters</code> is not set,
|
|
or is not supported for the device model in use, an attempted
|
|
change to the mac address originating from the guest side will
|
|
result in a non-working network connection.
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>vepa</code></dt>
|
|
<dd>All VMs' packets are sent to the external bridge. Packets
|
|
whose destination is a VM on the same host as where the
|
|
packet originates from are sent back to the host by the VEPA
|
|
capable bridge (today's bridges are typically not VEPA capable).</dd>
|
|
<dt><code>bridge</code></dt>
|
|
<dd>Packets whose destination is on the same host as where they
|
|
originate from are directly delivered to the target macvtap device.
|
|
Both origin and destination devices need to be in bridge mode
|
|
for direct delivery. If either one of them is in <code>vepa</code> mode,
|
|
a VEPA capable bridge is required.</dd>
|
|
<dt><code>private</code></dt>
|
|
<dd>All packets are sent to the external bridge and will only be
|
|
delivered to a target VM on the same host if they are sent through an
|
|
external router or gateway and that device sends them back to the
|
|
host. This procedure is followed if either the source or destination
|
|
device is in <code>private</code> mode.</dd>
|
|
<dt><code>passthrough</code></dt>
|
|
<dd>This feature attaches a virtual function of a SRIOV capable
|
|
NIC directly to a VM without losing the migration capability.
|
|
All packets are sent to the VF/IF of the configured network device.
|
|
Depending on the capabilities of the device additional prerequisites or
|
|
limitations may apply; for example, on Linux this requires
|
|
kernel 2.6.38 or newer. <span class="since">Since 0.9.2</span></dd>
|
|
</dl>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
...
|
|
<interface type='direct' trustGuestRxFilters='no'>
|
|
<source dev='eth0' mode='vepa'/>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
The network access of direct attached virtual machines can be
|
|
managed by the hardware switch to which the physical interface
|
|
of the host machine is connected to.
|
|
</p>
|
|
<p>
|
|
The interface can have additional parameters as shown below,
|
|
if the switch is conforming to the IEEE 802.1Qbg standard.
|
|
The parameters of the virtualport element are documented in more detail
|
|
in the IEEE 802.1Qbg standard. The values are network specific and
|
|
should be provided by the network administrator. In 802.1Qbg terms,
|
|
the Virtual Station Interface (VSI) represents the virtual interface
|
|
of a virtual machine. <span class="since">Since 0.8.2</span>
|
|
</p>
|
|
<p>
|
|
Please note that IEEE 802.1Qbg requires a non-zero value for the
|
|
VLAN ID.
|
|
</p>
|
|
<dl>
|
|
<dt><code>managerid</code></dt>
|
|
<dd>The VSI Manager ID identifies the database containing the VSI type
|
|
and instance definitions. This is an integer value and the
|
|
value 0 is reserved.</dd>
|
|
<dt><code>typeid</code></dt>
|
|
<dd>The VSI Type ID identifies a VSI type characterizing the network
|
|
access. VSI types are typically managed by network administrator.
|
|
This is an integer value.
|
|
</dd>
|
|
<dt><code>typeidversion</code></dt>
|
|
<dd>The VSI Type Version allows multiple versions of a VSI Type.
|
|
This is an integer value.
|
|
</dd>
|
|
<dt><code>instanceid</code></dt>
|
|
<dd>The VSI Instance ID Identifier is generated when a VSI instance
|
|
(i.e. a virtual interface of a virtual machine) is created.
|
|
This is a globally unique identifier.
|
|
</dd>
|
|
</dl>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
...
|
|
<interface type='direct'>
|
|
<source dev='eth0.2' mode='vepa'/>
|
|
<virtualport type="802.1Qbg">
|
|
<parameters managerid="11" typeid="1193047" typeidversion="2" instanceid="09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f"/>
|
|
</virtualport>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
The interface can have additional parameters as shown below
|
|
if the switch is conforming to the IEEE 802.1Qbh standard.
|
|
The values are network specific and should be provided by the
|
|
network administrator. <span class="since">Since 0.8.2</span>
|
|
</p>
|
|
<dl>
|
|
<dt><code>profileid</code></dt>
|
|
<dd>The profile ID contains the name of the port profile that is to
|
|
be applied to this interface. This name is resolved by the port
|
|
profile database into the network parameters from the port profile,
|
|
and those network parameters will be applied to this interface.
|
|
</dd>
|
|
</dl>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
...
|
|
<interface type='direct'>
|
|
<source dev='eth0' mode='private'/>
|
|
<virtualport type='802.1Qbh'>
|
|
<parameters profileid='finance'/>
|
|
</virtualport>
|
|
</interface>
|
|
</devices>
|
|
...
|
|
</pre>
|
|
|
|
|
|
<h5><a id="elementsNICSHostdev">PCI Passthrough</a></h5>
|
|
|
|
<p>
|
|
A PCI network device (specified by the <source> element)
|
|
is directly assigned to the guest using generic device
|
|
passthrough, after first optionally setting the device's MAC
|
|
address to the configured value, and associating the device with
|
|
an 802.1Qbh capable switch using an optionally specified
|
|
<virtualport> element (see the examples of virtualport
|
|
given above for type='direct' network devices). Note that - due
|
|
to limitations in standard single-port PCI ethernet card driver
|
|
design - only SR-IOV (Single Root I/O Virtualization) virtual
|
|
function (VF) devices can be assigned in this manner; to assign
|
|
a standard single-port PCI or PCIe ethernet card to a guest, use
|
|
the traditional <hostdev> device definition and
|
|
<span class="since">Since 0.9.11</span>
|
|
</p>
|
|
|
|
<p>
|
|
To use VFIO device assignment rather than traditional/legacy KVM
|
|
device assignment (VFIO is a new method of device assignment
|
|
that is compatible with UEFI Secure Boot), a type='hostdev'
|
|
interface can have an optional <code>driver</code> sub-element
|
|
with a <code>name</code> attribute set to "vfio". To use legacy
|
|
KVM device assignment you can set <code>name</code> to "kvm" (or
|
|
simply omit the <code><driver></code> element, since "kvm"
|
|
is currently the default).
|
|
<span class="since">Since 1.0.5 (QEMU and KVM only, requires kernel 3.6 or newer)</span>
|
|
</p>
|
|
|
|
<p>
|
|
Note that this "intelligent passthrough" of network devices is
|
|
very similar to the functionality of a standard <hostdev>
|
|
device, the difference being that this method allows specifying
|
|
a MAC address and <virtualport> for the passed-through
|
|
device. If these capabilities are not required, if you have a
|
|
standard single-port PCI, PCIe, or USB network card that doesn't
|
|
support SR-IOV (and hence would anyway lose the configured MAC
|
|
address during reset after being assigned to the guest domain),
|
|
or if you are using a version of libvirt older than 0.9.11, you
|
|
should use standard <hostdev> to assign the device to the
|
|
guest instead of <interface type='hostdev'/>.
|
|
</p>
|
|
|
|
<p>
|
|
Similar to the functionality of a standard <hostdev> device,
|
|
when <code>managed</code> is "yes", it is detached from the host
|
|
before being passed on to the guest, and reattached to the host
|
|
after the guest exits. If <code>managed</code> is omitted or "no",
|
|
the user is responsible to call <code>virNodeDeviceDettach</code>
|
|
(or <code>virsh nodedev-detach</code>) before starting the guest
|
|
or hot-plugging the device, and <code>virNodeDeviceReAttach</code>
|
|
(or <code>virsh nodedev-reattach</code>) after hot-unplug or
|
|
stopping the guest.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='hostdev' managed='yes'>
|
|
<driver name='vfio'/>
|
|
<source>
|
|
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
|
|
</source>
|
|
<mac address='52:54:00:6d:90:02'/>
|
|
<virtualport type='802.1Qbh'>
|
|
<parameters profileid='finance'/>
|
|
</virtualport>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
|
|
<h5><a id="elementsNICSMulticast">Multicast tunnel</a></h5>
|
|
|
|
<p>
|
|
A multicast group is setup to represent a virtual network. Any VMs
|
|
whose network devices are in the same multicast group can talk to each
|
|
other even across hosts. This mode is also available to unprivileged
|
|
users. There is no default DNS or DHCP support and no outgoing network
|
|
access. To provide outgoing network access, one of the VMs should have a
|
|
2nd NIC which is connected to one of the first 4 network types and do the
|
|
appropriate routing. The multicast protocol is compatible with that used
|
|
by user mode linux guests too. The source address used must be from the
|
|
multicast address block.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='mcast'>
|
|
<mac address='52:54:00:6d:90:01'/>
|
|
<source address='230.0.0.1' port='5558'/>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h5><a id="elementsNICSTCP">TCP tunnel</a></h5>
|
|
|
|
<p>
|
|
A TCP client/server architecture provides a virtual network. One VM
|
|
provides the server end of the network, all other VMS are configured as
|
|
clients. All network traffic is routed between the VMs via the server.
|
|
This mode is also available to unprivileged users. There is no default
|
|
DNS or DHCP support and no outgoing network access. To provide outgoing
|
|
network access, one of the VMs should have a 2nd NIC which is connected
|
|
to one of the first 4 network types and do the appropriate routing.</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='server'>
|
|
<mac address='52:54:00:22:c9:42'/>
|
|
<source address='192.168.0.1' port='5558'/>
|
|
</interface>
|
|
...
|
|
<interface type='client'>
|
|
<mac address='52:54:00:8b:c9:51'/>
|
|
<source address='192.168.0.1' port='5558'/>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h5><a id="elementsNICSUDP">UDP unicast tunnel</a></h5>
|
|
|
|
<p>
|
|
A UDP unicast architecture provides a virtual network which enables
|
|
connections between QEMU instances using QEMU's UDP infrastructure.
|
|
|
|
The xml "source" address is the endpoint address to which the UDP socket
|
|
packets will be sent from the host running QEMU.
|
|
The xml "local" address is the address of the interface from which the
|
|
UDP socket packets will originate from the QEMU host.
|
|
<span class="since">Since 1.2.20</span></p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='udp'>
|
|
<mac address='52:54:00:22:c9:42'/>
|
|
<source address='127.0.0.1' port='11115'>
|
|
<local address='127.0.0.1' port='11116'/>
|
|
</source>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h5><a id="elementsNICSModel">Setting the NIC model</a></h5>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<target dev='vnet1'/>
|
|
<b><model type='ne2k_pci'/></b>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
For hypervisors which support this, you can set the model of
|
|
emulated network interface card.
|
|
</p>
|
|
|
|
<p>
|
|
The values for <code>type</code> aren't defined specifically by
|
|
libvirt, but by what the underlying hypervisor supports (if
|
|
any). For QEMU and KVM you can get a list of supported models
|
|
with these commands:
|
|
</p>
|
|
|
|
<pre>
|
|
qemu -net nic,model=? /dev/null
|
|
qemu-kvm -net nic,model=? /dev/null
|
|
</pre>
|
|
|
|
<p>
|
|
Typical values for QEMU and KVM include:
|
|
ne2k_isa i82551 i82557b i82559er ne2k_pci pcnet rtl8139 e1000 virtio.
|
|
<span class="since">Since 5.2.0</span>, <code>virtio-transitional</code>
|
|
and <code>virtio-non-transitional</code> values are supported.
|
|
See <a href="#elementsVirtioTransitional">Virtio transitional devices</a>
|
|
for more details.
|
|
</p>
|
|
|
|
<h5><a id="elementsDriverBackendOptions">Setting NIC driver-specific options</a></h5>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<target dev='vnet1'/>
|
|
<model type='virtio'/>
|
|
<b><driver name='vhost' txmode='iothread' ioeventfd='on' event_idx='off' queues='5' rx_queue_size='256' tx_queue_size='256'>
|
|
<host csum='off' gso='off' tso4='off' tso6='off' ecn='off' ufo='off' mrg_rxbuf='off'/>
|
|
<guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/>
|
|
</driver>
|
|
</b></interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
Some NICs may have tunable driver-specific options. These are
|
|
set as attributes of the <code>driver</code> sub-element of the
|
|
interface definition. Currently the following attributes are
|
|
available for the <code>"virtio"</code> NIC driver:
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>name</code></dt>
|
|
<dd>
|
|
The optional <code>name</code> attribute forces which type of
|
|
backend driver to use. The value can be either 'qemu' (a
|
|
user-space backend) or 'vhost' (a kernel backend, which
|
|
requires the vhost module to be provided by the kernel); an
|
|
attempt to require the vhost driver without kernel support
|
|
will be rejected. If this attribute is not present, then the
|
|
domain defaults to 'vhost' if present, but silently falls back
|
|
to 'qemu' without error.
|
|
<span class="since">Since 0.8.8 (QEMU and KVM only)</span>
|
|
</dd>
|
|
<dd>
|
|
For interfaces of type='hostdev' (PCI passthrough devices)
|
|
the <code>name</code> attribute can optionally be set to
|
|
"vfio" or "kvm". "vfio" tells libvirt to use VFIO device
|
|
assignment rather than traditional KVM device assignment (VFIO
|
|
is a new method of device assignment that is compatible with
|
|
UEFI Secure Boot), and "kvm" tells libvirt to use the legacy
|
|
device assignment performed directly by the kvm kernel module
|
|
(the default is currently "kvm", but is subject to change).
|
|
<span class="since">Since 1.0.5 (QEMU and KVM only, requires
|
|
kernel 3.6 or newer)</span>
|
|
</dd>
|
|
<dd>
|
|
For interfaces of type='vhostuser', the <code>name</code>
|
|
attribute is ignored. The backend driver used is always
|
|
vhost-user.
|
|
</dd>
|
|
|
|
<dt><code>txmode</code></dt>
|
|
<dd>
|
|
The <code>txmode</code> attribute specifies how to handle
|
|
transmission of packets when the transmit buffer is full. The
|
|
value can be either 'iothread' or 'timer'.
|
|
<span class="since">Since 0.8.8 (QEMU and KVM only)</span><br/><br/>
|
|
|
|
If set to 'iothread', packet tx is all done in an iothread in
|
|
the bottom half of the driver (this option translates into
|
|
adding "tx=bh" to the qemu commandline -device virtio-net-pci
|
|
option).<br/><br/>
|
|
|
|
If set to 'timer', tx work is done in qemu, and if there is
|
|
more tx data than can be sent at the present time, a timer is
|
|
set before qemu moves on to do other things; when the timer
|
|
fires, another attempt is made to send more data.<br/><br/>
|
|
|
|
The resulting difference, according to the qemu developer who
|
|
added the option is: "bh makes tx more asynchronous and reduces
|
|
latency, but potentially causes more processor bandwidth
|
|
contention since the CPU doing the tx isn't necessarily the
|
|
CPU where the guest generated the packets."<br/><br/>
|
|
|
|
<b>In general you should leave this option alone, unless you
|
|
are very certain you know what you are doing.</b>
|
|
</dd>
|
|
<dt><code>ioeventfd</code></dt>
|
|
<dd>
|
|
This optional attribute allows users to set
|
|
<a href='https://patchwork.kernel.org/patch/43390/'>
|
|
domain I/O asynchronous handling</a> for interface device.
|
|
The default is left to the discretion of the hypervisor.
|
|
Accepted values are "on" and "off". Enabling this allows
|
|
qemu to execute VM while a separate thread handles I/O.
|
|
Typically guests experiencing high system CPU utilization
|
|
during I/O will benefit from this. On the other hand,
|
|
on overloaded host it could increase guest I/O latency.
|
|
<span class="since">Since 0.9.3 (QEMU and KVM only)</span><br/><br/>
|
|
|
|
<b>In general you should leave this option alone, unless you
|
|
are very certain you know what you are doing.</b>
|
|
</dd>
|
|
<dt><code>event_idx</code></dt>
|
|
<dd>
|
|
The <code>event_idx</code> attribute controls some aspects of
|
|
device event processing. The value can be either 'on' or 'off'
|
|
- if it is on, it will reduce the number of interrupts and
|
|
exits for the guest. The default is determined by QEMU;
|
|
usually if the feature is supported, default is on. In case
|
|
there is a situation where this behavior is suboptimal, this
|
|
attribute provides a way to force the feature off.
|
|
<span class="since">Since 0.9.5 (QEMU and KVM only)</span><br/><br/>
|
|
|
|
<b>In general you should leave this option alone, unless you
|
|
are very certain you know what you are doing.</b>
|
|
</dd>
|
|
<dt><code>queues</code></dt>
|
|
<dd>
|
|
The optional <code>queues</code> attribute controls the number
|
|
of queues to be used for either
|
|
<a href="https://www.linux-kvm.org/page/Multiqueue"> Multiqueue
|
|
virtio-net</a> or <a href="#elementVhostuser">vhost-user</a> network
|
|
interfaces. Use of multiple packet processing queues requires the
|
|
interface having the <code><model type='virtio'/></code>
|
|
element. Each queue will potentially be handled by a different
|
|
processor, resulting in much higher throughput.
|
|
<span class="since">virtio-net since 1.0.6 (QEMU and KVM only)</span>
|
|
<span class="since">vhost-user since 1.2.17 (QEMU and KVM only)</span>
|
|
</dd>
|
|
<dt><code>rx_queue_size</code></dt>
|
|
<dd>
|
|
The optional <code>rx_queue_size</code> attribute controls
|
|
the size of virtio ring for each queue as described above.
|
|
The default value is hypervisor dependent and may change
|
|
across its releases. Moreover, some hypervisors may pose
|
|
some restrictions on actual value. For instance, latest
|
|
QEMU (as of 2016-09-01) requires value to be a power of two
|
|
from [256, 1024] range.
|
|
<span class="since">Since 2.3.0 (QEMU and KVM only)</span><br/><br/>
|
|
|
|
<b>In general you should leave this option alone, unless you
|
|
are very certain you know what you are doing.</b>
|
|
</dd>
|
|
<dt><code>tx_queue_size</code></dt>
|
|
<dd>
|
|
The optional <code>tx_queue_size</code> attribute controls
|
|
the size of virtio ring for each queue as described above.
|
|
The default value is hypervisor dependent and may change
|
|
across its releases. Moreover, some hypervisors may pose
|
|
some restrictions on actual value. For instance, QEMU
|
|
v2.9 requires value to be a power of two from [256, 1024]
|
|
range. In addition to that, this may work only for a subset of
|
|
interface types, e.g. aforementioned QEMU enables this option
|
|
only for <code>vhostuser</code> type.
|
|
<span class="since">Since 3.7.0 (QEMU and KVM only)</span><br/><br/>
|
|
|
|
<b>In general you should leave this option alone, unless you
|
|
are very certain you know what you are doing.</b>
|
|
</dd>
|
|
<dt>virtio options</dt>
|
|
<dd>
|
|
For virtio interfaces,
|
|
<a href="#elementsVirtio">Virtio-specific options</a> can also be
|
|
set. (<span class="since">Since 3.5.0</span>)
|
|
</dd>
|
|
</dl>
|
|
<p>
|
|
Offloading options for the host and guest can be configured using
|
|
the following sub-elements:
|
|
</p>
|
|
<dl>
|
|
<dt><code>host</code></dt>
|
|
<dd>
|
|
The <code>csum</code>, <code>gso</code>, <code>tso4</code>,
|
|
<code>tso6</code>, <code>ecn</code> and <code>ufo</code>
|
|
attributes with possible values <code>on</code>
|
|
and <code>off</code> can be used to turn off host offloading options.
|
|
By default, the supported offloads are enabled by QEMU.
|
|
<span class="since">Since 1.2.9 (QEMU only)</span>
|
|
The <code>mrg_rxbuf</code> attribute can be used to control
|
|
mergeable rx buffers on the host side. Possible values are
|
|
<code>on</code> (default) and <code>off</code>.
|
|
<span class="since">Since 1.2.13 (QEMU only)</span>
|
|
</dd>
|
|
<dt><code>guest</code></dt>
|
|
<dd>
|
|
The <code>csum</code>, <code>tso4</code>,
|
|
<code>tso6</code>, <code>ecn</code> and <code>ufo</code>
|
|
attributes with possible values <code>on</code>
|
|
and <code>off</code> can be used to turn off guest offloading options.
|
|
By default, the supported offloads are enabled by QEMU.
|
|
<span class="since">Since 1.2.9 (QEMU only)</span>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h5><a id="elementsBackendOptions">Setting network backend-specific options</a></h5>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<target dev='vnet1'/>
|
|
<model type='virtio'/>
|
|
<b><backend tap='/dev/net/tun' vhost='/dev/vhost-net'/></b>
|
|
<driver name='vhost' txmode='iothread' ioeventfd='on' event_idx='off' queues='5'/>
|
|
<b><tune>
|
|
<sndbuf>1600</sndbuf>
|
|
</tune></b>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
For tuning the backend of the network, the <code>backend</code> element
|
|
can be used. The <code>vhost</code> attribute can override the default vhost
|
|
device path (<code>/dev/vhost-net</code>) for devices with <code>virtio</code> model.
|
|
The <code>tap</code> attribute overrides the tun/tap device path (default:
|
|
<code>/dev/net/tun</code>) for network and bridge interfaces. This does not work
|
|
in session mode. <span class="since">Since 1.2.9</span>
|
|
</p>
|
|
<p>
|
|
For tap devices there is also <code>sndbuf</code> element which can
|
|
adjust the size of send buffer in the host. <span class="since">Since
|
|
0.8.8</span>
|
|
</p>
|
|
<h5><a id="elementsNICSTargetOverride">Overriding the target element</a></h5>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<b><target dev='vnet1'/></b>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
If no target is specified, certain hypervisors will
|
|
automatically generate a name for the created tun device. This
|
|
name can be manually specified, however the name <i>should not
|
|
start with either 'vnet', 'vif', 'macvtap', or 'macvlan'</i>,
|
|
which are prefixes reserved by libvirt and certain hypervisors.
|
|
Manually specified targets using these prefixes may be ignored.
|
|
</p>
|
|
|
|
<p>
|
|
Note that for LXC containers, this defines the name of the interface
|
|
on the host side. <span class="since">Since 1.2.7</span>, to define
|
|
the name of the device on the guest side, the <code>guest</code>
|
|
element should be used, as in the following snippet:
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<b><guest dev='myeth'/></b>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h5><a id="elementsNICSBoot">Specifying boot order</a></h5>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<target dev='vnet1'/>
|
|
<b><boot order='1'/></b>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
For hypervisors which support this, you can set a specific NIC to
|
|
be used for network boot. The <code>order</code> attribute determines
|
|
the order in which devices will be tried during boot sequence. The
|
|
per-device <code>boot</code> elements cannot be used together with
|
|
general boot elements in
|
|
<a href="#elementsOSBIOS">BIOS bootloader</a> section.
|
|
<span class="since">Since 0.8.8</span>
|
|
</p>
|
|
|
|
<h5><a id="elementsNICSROM">Interface ROM BIOS configuration</a></h5>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<target dev='vnet1'/>
|
|
<b><rom bar='on' file='/etc/fake/boot.bin'/></b>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
For hypervisors which support this, you can change how a PCI Network
|
|
device's ROM is presented to the guest. The <code>bar</code>
|
|
attribute can be set to "on" or "off", and determines whether
|
|
or not the device's ROM will be visible in the guest's memory
|
|
map. (In PCI documentation, the "rombar" setting controls the
|
|
presence of the Base Address Register for the ROM). If no rom
|
|
bar is specified, the qemu default will be used (older
|
|
versions of qemu used a default of "off", while newer qemus
|
|
have a default of "on").
|
|
The optional <code>file</code> attribute is used to point to a
|
|
binary file to be presented to the guest as the device's ROM
|
|
BIOS. This can be useful to provide an alternative boot ROM for a
|
|
network device.
|
|
<span class="since">Since 0.9.10 (QEMU and KVM only)</span>.
|
|
</p>
|
|
<h5><a id="elementDomain">Setting up a network backend in a driver domain</a></h5>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
...
|
|
<interface type='bridge'>
|
|
<source bridge='br0'/>
|
|
<b><backenddomain name='netvm'/></b>
|
|
</interface>
|
|
...
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
The optional <code>backenddomain</code> element allows specifying a
|
|
backend domain (aka driver domain) for the interface. Use the
|
|
<code>name</code> attribute to specify the backend domain name. You
|
|
can use it to create a direct network link between domains (so data
|
|
will not go through host system). Use with type 'ethernet' to create
|
|
plain network link, or with type 'bridge' to connect to a bridge inside
|
|
the backend domain.
|
|
<span class="since">Since 1.2.13 (Xen only)</span>
|
|
</p>
|
|
|
|
<h5><a id="elementQoS">Quality of service</a></h5>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<target dev='vnet0'/>
|
|
<b><bandwidth>
|
|
<inbound average='1000' peak='5000' floor='200' burst='1024'/>
|
|
<outbound average='128' peak='256' burst='256'/>
|
|
</bandwidth></b>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
This part of interface XML provides setting quality of service. Incoming
|
|
and outgoing traffic can be shaped independently.
|
|
The <code>bandwidth</code> element and its child elements are described
|
|
in the <a href="formatnetwork.html#elementQoS">QoS</a> section of
|
|
the Network XML.
|
|
</p>
|
|
|
|
<h5><a id="elementVlanTag">Setting VLAN tag (on supported network types only)</a></h5>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='bridge'>
|
|
<b><vlan></b>
|
|
<b><tag id='42'/></b>
|
|
<b></vlan></b>
|
|
<source bridge='ovsbr0'/>
|
|
<virtualport type='openvswitch'>
|
|
<parameters interfaceid='09b11c53-8b5c-4eeb-8f00-d84eaa0aaa4f'/>
|
|
</virtualport>
|
|
</interface>
|
|
<interface type='bridge'>
|
|
<b><vlan trunk='yes'></b>
|
|
<b><tag id='42'/></b>
|
|
<b><tag id='123' nativeMode='untagged'/></b>
|
|
<b></vlan></b>
|
|
...
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
If (and only if) the network connection used by the guest
|
|
supports VLAN tagging transparent to the guest, an
|
|
optional <code><vlan></code> element can specify one or
|
|
more VLAN tags to apply to the guest's network
|
|
traffic <span class="since">Since 0.10.0</span>. Network
|
|
connections that support guest-transparent VLAN tagging include
|
|
1) type='bridge' interfaces connected to an Open vSwitch bridge
|
|
<span class="since">Since 0.10.0</span>, 2) SRIOV Virtual
|
|
Functions (VF) used via type='hostdev' (direct device
|
|
assignment) <span class="since">Since 0.10.0</span>, and 3)
|
|
SRIOV VFs used via type='direct' with mode='passthrough'
|
|
(macvtap "passthru" mode) <span class="since">Since
|
|
1.3.5</span>. All other connection types, including standard
|
|
linux bridges and libvirt's own virtual networks, <b>do not</b>
|
|
support it. 802.1Qbh (vn-link) and 802.1Qbg (VEPA) switches
|
|
provide their own way (outside of libvirt) to tag guest traffic
|
|
onto a specific VLAN. Each tag is given in a
|
|
separate <code><tag></code> subelement
|
|
of <code><vlan></code> (for example: <code><tag
|
|
id='42'/></code>). For VLAN trunking of multiple tags (which
|
|
is supported only on Open vSwitch connections),
|
|
multiple <code><tag></code> subelements can be specified,
|
|
which implies that the user wants to do VLAN trunking on the
|
|
interface for all the specified tags. In the case that VLAN
|
|
trunking of a single tag is desired, the optional
|
|
attribute <code>trunk='yes'</code> can be added to the toplevel
|
|
<code><vlan></code> element to differentiate trunking of a
|
|
single tag from normal tagging.
|
|
</p>
|
|
<p>
|
|
For network connections using Open vSwitch it is also possible
|
|
to configure 'native-tagged' and 'native-untagged' VLAN modes
|
|
<span class="since">Since 1.1.0.</span> This is done with the
|
|
optional <code>nativeMode</code> attribute on
|
|
the <code><tag></code> subelement: <code>nativeMode</code>
|
|
may be set to 'tagged' or 'untagged'. The <code>id</code>
|
|
attribute of the <code><tag></code> subelement
|
|
containing <code>nativeMode</code> sets which VLAN is considered
|
|
to be the "native" VLAN for this interface, and
|
|
the <code>nativeMode</code> attribute determines whether or not
|
|
traffic for that VLAN will be tagged.
|
|
</p>
|
|
|
|
<h5><a id="elementLink">Modifying virtual link state</a></h5>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<target dev='vnet0'/>
|
|
<b><link state='down'/></b>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
This element provides means of setting state of the virtual network link.
|
|
Possible values for attribute <code>state</code> are <code>up</code> and
|
|
<code>down</code>. If <code>down</code> is specified as the value, the interface
|
|
behaves as if it had the network cable disconnected. Default behavior if this
|
|
element is unspecified is to have the link state <code>up</code>.
|
|
<span class="since">Since 0.9.5</span>
|
|
</p>
|
|
|
|
<h5><a id="mtu">MTU configuration</a></h5>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<target dev='vnet0'/>
|
|
<b><mtu size='1500'/></b>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
This element provides means of setting MTU of the virtual network link.
|
|
Currently there is just one attribute <code>size</code> which accepts a
|
|
non-negative integer which specifies the MTU size for the interface.
|
|
<span class="since">Since 3.1.0</span>
|
|
</p>
|
|
|
|
<h5><a id="coalesce">Coalesce settings</a></h5>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<target dev='vnet0'/>
|
|
<b><coalesce>
|
|
<rx>
|
|
<frames max='7'/>
|
|
</rx>
|
|
</coalesce></b>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
This element provides means of setting coalesce settings for
|
|
some interface devices (currently only type <code>network</code>
|
|
and <code>bridge</code>. Currently there is just one attribute,
|
|
<code>max</code>, to tweak, in element <code>frames</code> for
|
|
the <code>rx</code> group, which accepts a non-negative integer
|
|
that specifies the maximum number of packets that will be
|
|
received before an interrupt.
|
|
<span class="since">Since 3.3.0</span>
|
|
</p>
|
|
|
|
<h5><a id="ipconfig">IP configuration</a></h5>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='network'>
|
|
<source network='default'/>
|
|
<target dev='vnet0'/>
|
|
<b><ip address='192.168.122.5' prefix='24'/></b>
|
|
<b><ip address='192.168.122.5' prefix='24' peer='10.0.0.10'/></b>
|
|
<b><route family='ipv4' address='192.168.122.0' prefix='24' gateway='192.168.122.1'/></b>
|
|
<b><route family='ipv4' address='192.168.122.8' gateway='192.168.122.1'/></b>
|
|
</interface>
|
|
...
|
|
<hostdev mode='capabilities' type='net'>
|
|
<source>
|
|
<interface>eth0</interface>
|
|
</source>
|
|
<b><ip address='192.168.122.6' prefix='24'/></b>
|
|
<b><route family='ipv4' address='192.168.122.0' prefix='24' gateway='192.168.122.1'/></b>
|
|
<b><route family='ipv4' address='192.168.122.8' gateway='192.168.122.1'/></b>
|
|
</hostdev>
|
|
...
|
|
</devices>
|
|
...
|
|
</pre>
|
|
|
|
<p>
|
|
<span class="since">Since 1.2.12</span> network devices and
|
|
hostdev devices with network capabilities can optionally be provided
|
|
one or more IP addresses to set on the network device in the
|
|
guest. Note that some hypervisors or network device types will
|
|
simply ignore them or only use the first one.
|
|
The <code>family</code> attribute can be set to
|
|
either <code>ipv4</code> or <code>ipv6</code>, and the
|
|
<code>address</code> attribute contains the IP address. The
|
|
optional <code>prefix</code> is the number of 1 bits in the
|
|
netmask, and will be automatically set if not specified - for
|
|
IPv4 the default prefix is determined according to the network
|
|
"class" (A, B, or C - see RFC870), and for IPv6 the default
|
|
prefix is 64. The optional <code>peer</code> attribute holds the
|
|
IP address of the other end of a point-to-point network
|
|
device <span class="since">(since 2.1.0)</span>.
|
|
</p>
|
|
|
|
<p>
|
|
<span class="since">Since 1.2.12</span> route elements can also be
|
|
added to define IP routes to add in the guest. The attributes of
|
|
this element are described in the documentation for
|
|
the <code>route</code> element
|
|
in <a href="formatnetwork.html#elementsStaticroute">network
|
|
definitions</a>. This is used by the LXC driver.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='ethernet'>
|
|
<b><source/></b>
|
|
<b><ip address='192.168.123.1' prefix='24'/></b>
|
|
<b><ip address='10.0.0.10' prefix='24' peer='192.168.122.5'/></b>
|
|
<b><route family='ipv4' address='192.168.42.0' prefix='24' gateway='192.168.123.4'/></b>
|
|
<b><source/></b>
|
|
...
|
|
</interface>
|
|
...
|
|
</devices>
|
|
...
|
|
</pre>
|
|
|
|
<p>
|
|
<span class="since">Since 2.1.0</span> network devices of type
|
|
"ethernet" can optionally be provided one or more IP addresses
|
|
and one or more routes to set on the <b>host</b> side of the
|
|
network device. These are configured as subelements of
|
|
the <code><source></code> element of the interface, and
|
|
have the same attributes as the similarly named elements used to
|
|
configure the guest side of the interface (described above).
|
|
</p>
|
|
|
|
<h5><a id="elementVhostuser">vhost-user interface</a></h5>
|
|
|
|
<p>
|
|
<span class="since">Since 1.2.7</span> the vhost-user enables the
|
|
communication between a QEMU virtual machine and other userspace process
|
|
using the Virtio transport protocol. A char dev (e.g. Unix socket) is used
|
|
for the control plane, while the data plane is based on shared memory.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface type='vhostuser'>
|
|
<mac address='52:54:00:3b:83:1a'/>
|
|
<source type='unix' path='/tmp/vhost1.sock' mode='server'/>
|
|
<model type='virtio'/>
|
|
</interface>
|
|
<interface type='vhostuser'>
|
|
<mac address='52:54:00:3b:83:1b'/>
|
|
<source type='unix' path='/tmp/vhost2.sock' mode='client'>
|
|
<reconnect enabled='yes' timeout='10'/>
|
|
</source>
|
|
<model type='virtio'/>
|
|
<driver queues='5'/>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
The <code><source></code> element has to be specified
|
|
along with the type of char device.
|
|
Currently, only type='unix' is supported, where the path (the
|
|
directory path of the socket) and mode attributes are required.
|
|
Both <code>mode='server'</code> and <code>mode='client'</code>
|
|
are supported.
|
|
vhost-user requires the virtio model type, thus the
|
|
<code><model></code> element is mandatory.
|
|
<span class="since">Since 4.1.0</span> the element has an
|
|
optional child element <code>reconnect</code> which
|
|
configures reconnect timeout if the connection is lost. It
|
|
has two attributes <code>enabled</code> (which accepts
|
|
<code>yes</code> and <code>no</code>) and
|
|
<code>timeout</code> which specifies the amount of seconds
|
|
after which hypervisor tries to reconnect.
|
|
</p>
|
|
|
|
<h5><a id="elementNwfilter">Traffic filtering with NWFilter</a></h5>
|
|
|
|
<p>
|
|
<span class="since">Since 0.8.0</span> an <code>nwfilter</code> profile
|
|
can be assigned to a domain interface, which allows configuring
|
|
traffic filter rules for the virtual machine.
|
|
|
|
See the <a href="formatnwfilter.html">nwfilter</a> documentation for more
|
|
complete details.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<interface ...>
|
|
...
|
|
<filterref filter='clean-traffic'/>
|
|
</interface>
|
|
<interface ...>
|
|
...
|
|
<filterref filter='myfilter'>
|
|
<parameter name='IP' value='104.207.129.11'/>
|
|
<parameter name='IP6_ADDR' value='2001:19f0:300:2102::'/>
|
|
<parameter name='IP6_MASK' value='64'/>
|
|
...
|
|
</filterref>
|
|
</interface>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
The <code>filter</code> attribute specifies the name of the nwfilter
|
|
to use. Optional <code><parameter></code> elements may be
|
|
specified for passing additional info to the nwfilter via the
|
|
<code>name</code> and <code>value</code> attributes. See
|
|
the <a href="formatnwfilter.html#nwfconceptsvars">nwfilter</a>
|
|
docs for info on parameters.
|
|
</p>
|
|
|
|
|
|
<h4><a id="elementsInput">Input devices</a></h4>
|
|
|
|
<p>
|
|
Input devices allow interaction with the graphical framebuffer
|
|
in the guest virtual machine. When enabling the framebuffer, an
|
|
input device is automatically provided. It may be possible to
|
|
add additional devices explicitly, for example,
|
|
to provide a graphics tablet for absolute cursor movement.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<input type='mouse' bus='usb'/>
|
|
<input type='keyboard' bus='usb'/>
|
|
<input type='mouse' bus='virtio'/>
|
|
<input type='keyboard' bus='virtio'/>
|
|
<input type='tablet' bus='virtio'/>
|
|
<input type='passthrough' bus='virtio'>
|
|
<source evdev='/dev/input/event1/>
|
|
</input>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>input</code></dt>
|
|
<dd>The <code>input</code> element has one mandatory attribute,
|
|
the <code>type</code> whose value can be 'mouse', 'tablet',
|
|
(<span class="since">since 1.2.2</span>) 'keyboard' or
|
|
(<span class="since">since 1.3.0</span>) 'passthrough'.
|
|
The tablet provides absolute cursor movement,
|
|
while the mouse uses relative movement. The optional
|
|
<code>bus</code> attribute can be used to refine the exact device type.
|
|
It takes values "xen" (paravirtualized), "ps2" and "usb" or
|
|
(<span class="since">since 1.3.0</span>) "virtio".</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
The <code>input</code> element has an optional
|
|
sub-element <code><address></code> which can tie the
|
|
device to a particular PCI
|
|
slot, <a href="#elementsAddress">documented above</a>.
|
|
On S390, <code>address</code> can be used to provide a CCW address for
|
|
an input device (<span class="since">since 4.2.0</span>).
|
|
|
|
For type <code>passthrough</code>, the mandatory sub-element <code>source</code>
|
|
must have an <code>evdev</code> attribute containing the absolute path to the
|
|
event device passed through to guests. (KVM only)
|
|
|
|
<span class="since">Since 5.2.0</span>, the <code>input</code> element
|
|
accepts a <code>model</code> attribute which has the values 'virtio',
|
|
'virtio-transitional' and 'virtio-non-transitional'. See
|
|
<a href="#elementsVirtioTransitional">Virtio transitional devices</a>
|
|
for more details.
|
|
</p>
|
|
|
|
<p>
|
|
The subelement <code>driver</code> can be used to tune the virtio
|
|
options of the device:
|
|
<a href="#elementsVirtio">Virtio-specific options</a> can also be
|
|
set. (<span class="since">Since 3.5.0</span>)
|
|
</p>
|
|
|
|
<h4><a id="elementsHub">Hub devices</a></h4>
|
|
|
|
<p>
|
|
A hub is a device that expands a single port into several so
|
|
that there are more ports available to connect devices to a host
|
|
system.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<hub type='usb'/>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>hub</code></dt>
|
|
<dd>The <code>hub</code> element has one mandatory attribute,
|
|
the <code>type</code> whose value can only be 'usb'.</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
The <code>hub</code> element has an optional
|
|
sub-element <code><address></code>
|
|
with <code>type='usb'</code>which can tie the device to a
|
|
particular controller, <a href="#elementsAddress">documented
|
|
above</a>.
|
|
</p>
|
|
|
|
<h4><a id="elementsGraphics">Graphical framebuffers</a></h4>
|
|
|
|
<p>
|
|
A graphics device allows for graphical interaction with the
|
|
guest OS. A guest will typically have either a framebuffer
|
|
or a text console configured to allow interaction with the
|
|
admin.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<graphics type='sdl' display=':0.0'/>
|
|
<graphics type='vnc' port='5904' sharePolicy='allow-exclusive'>
|
|
<listen type='address' address='1.2.3.4'/>
|
|
</graphics>
|
|
<graphics type='rdp' autoport='yes' multiUser='yes' />
|
|
<graphics type='desktop' fullscreen='yes'/>
|
|
<graphics type='spice'>
|
|
<listen type='network' network='rednet'/>
|
|
</graphics>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>graphics</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>graphics</code> element has a mandatory <code>type</code>
|
|
attribute which takes the value <code>sdl</code>, <code>vnc</code>,
|
|
<code>spice</code>, <code>rdp</code>, <code>desktop</code> or
|
|
<code>egl-headless</code>:
|
|
</p>
|
|
<dl>
|
|
<dt><code>sdl</code></dt>
|
|
<dd>
|
|
<p>
|
|
This displays a window on the host desktop, it can take 3 optional
|
|
arguments: a <code>display</code> attribute for the display to use,
|
|
an <code>xauth</code> attribute for the authentication identifier,
|
|
and an optional <code>fullscreen</code> attribute accepting values
|
|
<code>yes</code> or <code>no</code>.
|
|
</p>
|
|
|
|
<p>
|
|
You can use a <code>gl</code> with the <code>enable="yes"</code>
|
|
property to enable OpenGL support in SDL. Likewise you can
|
|
explicitly disable OpenGL support with <code>enable="no"</code>.
|
|
</p>
|
|
</dd>
|
|
<dt><code>vnc</code></dt>
|
|
<dd>
|
|
<p>
|
|
Starts a VNC server. The <code>port</code> attribute specifies
|
|
the TCP port number (with -1 as legacy syntax indicating that it
|
|
should be auto-allocated). The <code>autoport</code> attribute is
|
|
the new preferred syntax for indicating auto-allocation of the TCP
|
|
port to use. The <code>passwd</code> attribute provides a VNC
|
|
password in clear text. If the <code>passwd</code> attribute is
|
|
set to an empty string, then VNC access is disabled. The
|
|
<code>keymap</code> attribute specifies the keymap to use. It is
|
|
possible to set a limit on the validity of the password by giving
|
|
a timestamp <code>passwdValidTo='2010-04-09T15:51:00'</code>
|
|
assumed to be in UTC. The <code>connected</code> attribute allows
|
|
control of connected client during password changes. VNC accepts
|
|
<code>keep</code> value only <span class="since">since 0.9.3</span>.
|
|
NB, this may not be supported by all hypervisors.
|
|
</p>
|
|
<p>
|
|
The optional <code>sharePolicy</code> attribute specifies vnc
|
|
server display sharing policy. <code>allow-exclusive</code> allows
|
|
clients to ask for exclusive access by dropping other connections.
|
|
Connecting multiple clients in parallel requires all clients asking
|
|
for a shared session (vncviewer: -Shared switch). This is
|
|
the default value. <code>force-shared</code> disables exclusive
|
|
client access, every connection has to specify -Shared switch for
|
|
vncviewer. <code>ignore</code> welcomes every connection
|
|
unconditionally <span class="since">since 1.0.6</span>.
|
|
</p>
|
|
<p>
|
|
Rather than using listen/port, QEMU supports a <code>socket</code>
|
|
attribute for listening on a unix domain socket path
|
|
<span class="since">Since 0.8.8</span>.
|
|
</p>
|
|
<p>
|
|
For VNC WebSocket functionality, <code>websocket</code> attribute
|
|
may be used to specify port to listen on (with -1 meaning
|
|
auto-allocation and <code>autoport</code> having no effect due to
|
|
security reasons) <span class="since">Since 1.0.6</span>.
|
|
</p>
|
|
<p>
|
|
Although VNC doesn't support OpenGL natively, it can be paired
|
|
with graphics type <code>egl-headless</code> (see below) which
|
|
will instruct QEMU to open and use drm nodes for OpenGL rendering.
|
|
</p>
|
|
</dd>
|
|
<dt><code>spice</code> <span class="since">Since 0.8.6</span></dt>
|
|
<dd>
|
|
<p>
|
|
Starts a SPICE server. The <code>port</code> attribute specifies
|
|
the TCP port number (with -1 as legacy syntax indicating that it
|
|
should be auto-allocated), while <code>tlsPort</code> gives
|
|
an alternative secure port number. The <code>autoport</code>
|
|
attribute is the new preferred syntax for indicating
|
|
auto-allocation of needed port numbers. The <code>passwd</code>
|
|
attribute provides a SPICE password in clear text. If the
|
|
<code>passwd</code> attribute is set to an empty string, then
|
|
SPICE access is disabled. The <code>keymap</code> attribute
|
|
specifies the keymap to use. It is possible to set a limit on
|
|
the validity of the password by giving a timestamp
|
|
<code>passwdValidTo='2010-04-09T15:51:00'</code> assumed to be
|
|
in UTC.
|
|
</p>
|
|
<p>
|
|
The <code>connected</code> attribute allows control of connected
|
|
client during password changes. SPICE accepts <code>keep</code> to
|
|
keep client connected, <code>disconnect</code> to disconnect client
|
|
and <code>fail</code> to fail changing password . NB, this may not
|
|
be supported by all hypervisors.
|
|
<span class="since">Since 0.9.3</span>
|
|
</p>
|
|
<p>
|
|
The <code>defaultMode</code> attribute sets the default channel
|
|
security policy, valid values are <code>secure</code>,
|
|
<code>insecure</code> and the default <code>any</code> (which is
|
|
secure if possible, but falls back to insecure rather than erroring
|
|
out if no secure path is available).
|
|
<span class="since">Since 0.9.12</span>
|
|
</p>
|
|
<p>
|
|
When SPICE has both a normal and TLS secured TCP port configured,
|
|
it can be desirable to restrict what channels can be run on each
|
|
port. This is achieved by adding one or more <code><channel>
|
|
</code> elements inside the main <code><graphics></code>
|
|
element and setting the <code>mode</code> attribute to either
|
|
<code>secure</code> or <code>insecure</code>. Setting the mode
|
|
attribute overrides the default value as set by
|
|
the <code>defaultMode</code> attribute. (Note that specifying
|
|
<code>any</code> as mode discards the entry as the channel would
|
|
inherit the default mode anyways.) Valid channel names include
|
|
<code>main</code>, <code>display</code>, <code>inputs</code>,
|
|
<code>cursor</code>, <code>playback</code>, <code>record</code>
|
|
(all <span class="since"> since 0.8.6</span>);
|
|
<code>smartcard</code> (<span class="since">since 0.8.8</span>);
|
|
and <code>usbredir</code> (<span class="since">since 0.9.12</span>).
|
|
</p>
|
|
<pre>
|
|
<graphics type='spice' port='-1' tlsPort='-1' autoport='yes'>
|
|
<channel name='main' mode='secure'/>
|
|
<channel name='record' mode='insecure'/>
|
|
<image compression='auto_glz'/>
|
|
<streaming mode='filter'/>
|
|
<clipboard copypaste='no'/>
|
|
<mouse mode='client'/>
|
|
<filetransfer enable='no'/>
|
|
<gl enable='yes' rendernode='/dev/dri/by-path/pci-0000:00:02.0-render'/>
|
|
</graphics></pre>
|
|
<p>
|
|
Spice supports variable compression settings for audio, images and
|
|
streaming. These settings are accessible via the <code>compression
|
|
</code> attribute in all following elements: <code>image</code> to
|
|
set image compression (accepts <code>auto_glz</code>,
|
|
<code>auto_lz</code>, <code>quic</code>, <code>glz</code>,
|
|
<code>lz</code>, <code>off</code>), <code>jpeg</code> for JPEG
|
|
compression for images over wan (accepts <code>auto</code>,
|
|
<code>never</code>, <code>always</code>), <code>zlib</code> for
|
|
configuring wan image compression (accepts <code>auto</code>,
|
|
<code>never</code>, <code>always</code>) and <code>playback</code>
|
|
for enabling audio stream compression (accepts <code>on</code> or
|
|
<code>off</code>). <span class="since">Since 0.9.1</span>
|
|
</p>
|
|
<p>
|
|
Streaming mode is set by the <code>streaming</code> element,
|
|
settings its <code>mode</code> attribute to one of
|
|
<code>filter</code>, <code>all</code> or <code>off</code>.
|
|
<span class="since">Since 0.9.2</span>
|
|
</p>
|
|
<p>
|
|
Copy & Paste functionality (via Spice agent) is set by the
|
|
<code>clipboard</code> element. It is enabled by default, and can
|
|
be disabled by setting the <code>copypaste</code> property to
|
|
<code>no</code>. <span class="since">Since 0.9.3</span>
|
|
</p>
|
|
<p>
|
|
Mouse mode is set by the <code>mouse</code> element, setting its
|
|
<code>mode</code> attribute to one of <code>server</code> or
|
|
<code>client</code>. If no mode is specified, the qemu default will
|
|
be used (client mode). <span class="since">Since 0.9.11</span>
|
|
</p>
|
|
<p>
|
|
File transfer functionality (via Spice agent) is set using the
|
|
<code>filetransfer</code> element. It is enabled by default, and
|
|
can be disabled by setting the <code>enable</code> property to
|
|
<code>no</code>. <span class="since">Since 1.2.2</span>
|
|
</p>
|
|
<p>
|
|
Spice may provide accelerated server-side rendering with OpenGL.
|
|
You can enable or disable OpenGL support explicitly with
|
|
the <code>gl</code> element, by setting the <code>enable</code>
|
|
property. (QEMU only, <span class="since">since 1.3.3</span>).
|
|
Note that this only works locally, since this requires usage of
|
|
UNIX sockets, i.e. using <code>listen</code> types 'socket' or
|
|
'none'. For accelerated OpenGL with remote support, consider
|
|
pairing this element with type <code>egl-headless</code>
|
|
(see below). However, this will deliver weaker performance
|
|
compared to native Spice OpenGL support.
|
|
</p>
|
|
<p>
|
|
By default, QEMU will pick the first available GPU DRM render node.
|
|
You may specify a DRM render node path to use instead. (QEMU only,
|
|
<span class="since">since 3.1.0</span>).
|
|
</p>
|
|
</dd>
|
|
<dt><code>rdp</code></dt>
|
|
<dd>
|
|
<p>
|
|
Starts a RDP server. The <code>port</code> attribute specifies the
|
|
TCP port number (with -1 as legacy syntax indicating that it should
|
|
be auto-allocated). The <code>autoport</code> attribute is the new
|
|
preferred syntax for indicating auto-allocation of the TCP port to
|
|
use. In the VirtualBox driver, the <code>autoport</code> will make
|
|
the hypervisor pick available port from 3389-3689 range when the VM
|
|
is started. The chosen port will be reflected in the <code>port</code>
|
|
attribute. The <code>multiUser</code> attribute is a boolean deciding
|
|
whether multiple simultaneous connections to the VM are permitted.
|
|
The <code>replaceUser</code> attribute is a boolean deciding whether
|
|
the existing connection must be dropped and a new connection must
|
|
be established by the VRDP server, when a new client connects in
|
|
single connection mode.
|
|
</p>
|
|
</dd>
|
|
<dt><code>desktop</code></dt>
|
|
<dd>
|
|
<p>
|
|
This value is reserved for VirtualBox domains for the moment. It
|
|
displays a window on the host desktop, similarly to "sdl", but
|
|
using the VirtualBox viewer. Just like "sdl", it accepts
|
|
the optional attributes <code>display</code> and
|
|
<code>fullscreen</code>.
|
|
</p>
|
|
</dd>
|
|
<dt><code>egl-headless</code><span class="since">Since 4.6.0</span></dt>
|
|
<dd>
|
|
<p>
|
|
This display type provides support for an OpenGL accelerated
|
|
display accessible both locally and remotely (for comparison,
|
|
Spice's native OpenGL support only works locally using UNIX
|
|
sockets at the moment, but has better performance). Since this
|
|
display type doesn't provide any window or graphical console like
|
|
the other types, for practical reasons it should be paired with
|
|
either <code>vnc</code> or <code>spice</code> graphics types.
|
|
This display type is only supported by QEMU domains
|
|
(needs QEMU <span class="since">2.10</span> or newer).
|
|
<span class="Since">5.0.0</span> this element accepts a
|
|
<code><gl/></code> sub-element with an optional attribute
|
|
<code>rendernode</code> which can be used to specify an absolute
|
|
path to a host's DRI device to be used for OpenGL rendering.
|
|
</p>
|
|
<pre>
|
|
<graphics type='spice' autoport='yes'/>
|
|
<graphics type='egl-headless'>
|
|
<gl rendernode='/dev/dri/renderD128'/>
|
|
</graphics>
|
|
</pre>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
Graphics device uses a <code><listen></code> to set up where
|
|
the device should listen for clients. It has a mandatory attribute
|
|
<code>type</code> which specifies the listen type. Only <code>vnc</code>,
|
|
<code>spice</code> and <code>rdp</code> supports <code><listen>
|
|
</code> element. <span class="since">Since 0.9.4</span>.
|
|
Available types are:
|
|
</p>
|
|
<dl>
|
|
<dt><code>address</code></dt>
|
|
<dd>
|
|
<p>
|
|
Tells a graphics device to use an address specified in the
|
|
<code>address</code> attribute, which will contain either an IP address
|
|
or hostname (which will be resolved to an IP address via a DNS query)
|
|
to listen on.
|
|
</p>
|
|
<p>
|
|
It is possible to omit the <code>address</code> attribute in order to
|
|
use an address from config files <span class="since">Since 1.3.5</span>.
|
|
</p>
|
|
<p>
|
|
The <code>address</code> attribute is duplicated as <code>listen</code>
|
|
attribute in <code>graphics</code> element for backward compatibility.
|
|
If both are provided they must be equal.
|
|
</p>
|
|
</dd>
|
|
<dt><code>network</code></dt>
|
|
<dd>
|
|
<p>
|
|
This is used to specify an existing network in the <code>network</code>
|
|
attribute from libvirt's list of configured networks. The named network
|
|
configuration will be examined to determine an appropriate listen
|
|
address and the address will be stored in live XML in <code>address
|
|
</code> attribute. For example, if the network has an IPv4 address in
|
|
its configuration (e.g. if it has a forward type of <code>route</code>,
|
|
<code>nat</code>, or no forward type (isolated)), the first IPv4
|
|
address listed in the network's configuration will be used.
|
|
If the network is describing a host bridge, the first IPv4 address
|
|
associated with that bridge device will be used, and if the network is
|
|
describing one of the 'direct' (macvtap) modes, the first IPv4 address
|
|
of the first forward dev will be used.
|
|
</p>
|
|
</dd>
|
|
<dt><code>socket</code> <span class="since">since 2.0.0 (QEMU only)</span></dt>
|
|
<dd>
|
|
<p>
|
|
This listen type tells a graphics server to listen on unix socket.
|
|
Attribute <code>socket</code> contains a path to unix socket. If this
|
|
attribute is omitted libvirt will generate this path for you.
|
|
Supported by graphics type <code>vnc</code> and <code>spice</code>.
|
|
</p>
|
|
<p>
|
|
For <code>vnc</code> graphics be backward compatible
|
|
the <code>socket</code> attribute of first <code>listen</code> element
|
|
is duplicated as <code>socket</code> attribute in <code>graphics</code>
|
|
element. If <code>graphics</code> element contains a <code>socket</code>
|
|
attribute all <code>listen</code> elements are ignored.
|
|
</p>
|
|
</dd>
|
|
<dt><code>none</code> <span class="since">since 2.0.0 (QEMU only)</span></dt>
|
|
<dd>
|
|
<p>
|
|
This listen type doesn't have any other attribute. Libvirt supports
|
|
passing a file descriptor through our APIs virDomainOpenGraphics() and
|
|
virDomainOpenGraphicsFD(). No other listen types are allowed if this
|
|
one is used and the graphics device doesn't listen anywhere. You need
|
|
to use one of the two APIs to pass a FD to QEMU in order to connect to
|
|
this graphics device. Supported by graphics type <code>vnc</code> and
|
|
<code>spice</code>.
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsVideo">Video devices</a></h4>
|
|
<p>
|
|
A video device.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<video>
|
|
<model type='vga' vram='16384' heads='1'>
|
|
<acceleration accel3d='yes' accel2d='yes'/>
|
|
</model>
|
|
</video>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>video</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>video</code> element is the container for describing
|
|
video devices. For backwards compatibility, if no <code>video</code>
|
|
is set but there is a <code>graphics</code> in domain xml, then
|
|
libvirt will add a default <code>video</code> according to the guest
|
|
type.
|
|
</p>
|
|
<p>
|
|
For a guest of type "kvm", the default <code>video</code> is:
|
|
<code>type</code> with value "cirrus", <code>vram</code> with value
|
|
"16384" and <code>heads</code> with value "1". By default, the first
|
|
video device in domain xml is the primary one, but the optional
|
|
attribute <code>primary</code> (<span class="since">since 1.0.2</span>)
|
|
with value 'yes' can be used to mark the primary in cases of multiple
|
|
video device. The non-primary must be type of "qxl" or
|
|
(<span class="since">since 2.4.0</span>) "virtio".
|
|
</p>
|
|
</dd>
|
|
|
|
<dt><code>model</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>model</code> element has a mandatory <code>type</code>
|
|
attribute which takes the value "vga", "cirrus", "vmvga", "xen",
|
|
"vbox", "qxl" (<span class="since">since 0.8.6</span>),
|
|
"virtio" (<span class="since">since 1.3.0</span>),
|
|
"gop" (<span class="since">since 3.2.0</span>),
|
|
"none" (<span class="since">since 4.6.0</span>, or "bochs"
|
|
(<span class="since">since 5.6.0</span>)
|
|
depending on the hypervisor features available.
|
|
The purpose of the type <code>none</code> is to instruct libvirt not
|
|
to add a default video device in the guest (see the paragraph above).
|
|
This legacy behaviour can be inconvenient in cases where GPU mediated
|
|
devices are meant to be the only rendering device within a guest and
|
|
so specifying another <code>video</code> device along with type
|
|
<code>none</code>.
|
|
Refer to <a id="elementsHostDev">Host device assignment</a> to see
|
|
how to add a mediated device into a guest.
|
|
</p>
|
|
<p>
|
|
You can provide the amount of video memory in kibibytes (blocks of
|
|
1024 bytes) using <code>vram</code>. This is supported only for guest
|
|
type of "libxl", "vz", "qemu", "vbox", "vmx" and "xen". If no
|
|
value is provided the default is used. If the size is not a power of
|
|
two it will be rounded to closest one.
|
|
</p>
|
|
<p>
|
|
The number of screen can be set using <code>heads</code>. This is
|
|
supported only for guests type of "vz", "kvm", "vbox" and "vmx".
|
|
</p>
|
|
<p>
|
|
For guest type of "kvm" or "qemu" and model type "qxl" there are
|
|
optional attributes. Attribute <code>ram</code> (<span class="since">
|
|
since 1.0.2</span>) specifies the size of the primary bar, while the
|
|
attribute <code>vram</code> specifies the secondary bar size.
|
|
If <code>ram</code> or <code>vram</code> are not supplied a default
|
|
value is used. The <code>ram</code> should also be rounded to power of
|
|
two as <code>vram</code>. There is also optional attribute
|
|
<code>vgamem</code> (<span class="since">since 1.2.11</span>) to set
|
|
the size of VGA framebuffer for fallback mode of QXL device.
|
|
Attribute <code>vram64</code> (<span class="since">since 1.3.3</span>)
|
|
extends secondary bar and makes it addressable as 64bit memory.
|
|
</p>
|
|
</dd>
|
|
|
|
<dt><code>acceleration</code></dt>
|
|
<dd>
|
|
Configure if video acceleration should be enabled.
|
|
<dl>
|
|
<dt><code>accel2d</code></dt>
|
|
<dd>Enable 2D acceleration (for vbox driver only,
|
|
<span class="since">since 0.7.1</span>)</dd>
|
|
|
|
<dt><code>accel3d</code></dt>
|
|
<dd>Enable 3D acceleration (for vbox driver
|
|
<span class="since">since 0.7.1</span>, qemu driver
|
|
<span class="since">since 1.3.0</span>)</dd>
|
|
</dl>
|
|
</dd>
|
|
|
|
<dt><code>address</code></dt>
|
|
<dd>
|
|
The optional <code>address</code> sub-element can be used to
|
|
tie the video device to a particular PCI slot.
|
|
On S390, <code>address</code> can be used to provide the
|
|
CCW address for the video device (<span class="since">
|
|
since 4.2.0</span>).
|
|
</dd>
|
|
|
|
<dt><code>driver</code></dt>
|
|
<dd>
|
|
The subelement <code>driver</code> can be used to tune the device:
|
|
<dl>
|
|
<dt>virtio options</dt>
|
|
<dd>
|
|
<a href="#elementsVirtio">Virtio-specific options</a> can also be
|
|
set (<span class="since">Since 3.5.0</span>)
|
|
</dd>
|
|
<dt>VGA configuration</dt>
|
|
<dd>
|
|
Control how the video devices exposed to the guest using the
|
|
<code>vgaconf</code> attribute which takes the value "io", "on" or "off".
|
|
At present, it's only applicable to the bhyve's "gop" video model type
|
|
(<span class="since">Since 3.5.0</span>)
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsConsole">Consoles, serial, parallel & channel devices</a></h4>
|
|
|
|
<p>
|
|
A character device provides a way to interact with the virtual machine.
|
|
Paravirtualized consoles, serial ports, parallel ports and channels are
|
|
all classed as character devices and so represented using the same syntax.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<parallel type='pty'>
|
|
<source path='/dev/pts/2'/>
|
|
<target port='0'/>
|
|
</parallel>
|
|
<serial type='pty'>
|
|
<source path='/dev/pts/3'/>
|
|
<target port='0'/>
|
|
</serial>
|
|
<serial type='file'>
|
|
<source path='/tmp/file' append='on'>
|
|
<seclabel model='dac' relabel='no'/>
|
|
</source>
|
|
<target port='0'/>
|
|
</serial>
|
|
<console type='pty'>
|
|
<source path='/dev/pts/4'/>
|
|
<target port='0'/>
|
|
</console>
|
|
<channel type='unix'>
|
|
<source mode='bind' path='/tmp/guestfwd'/>
|
|
<target type='guestfwd' address='10.0.2.1' port='4600'/>
|
|
</channel>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
In each of these directives, the top-level element name (parallel, serial,
|
|
console, channel) describes how the device is presented to the guest. The
|
|
guest interface is configured by the <code>target</code> element.
|
|
</p>
|
|
|
|
<p>
|
|
The interface presented to the host is given in the <code>type</code>
|
|
attribute of the top-level element. The host interface is
|
|
configured by the <code>source</code> element.
|
|
</p>
|
|
|
|
<p>
|
|
The <code>source</code> element may contain an optional
|
|
<code>seclabel</code> to override the way that labelling
|
|
is done on the socket path. If this element is not present,
|
|
the <a href="#seclabel">security label is inherited from
|
|
the per-domain setting</a>.
|
|
</p>
|
|
|
|
<p>
|
|
If the interface <code>type</code> presented to the host is "file",
|
|
then the <code>source</code> element may contain an optional attribute
|
|
<code>append</code> that specifies whether or not the information in
|
|
the file should be preserved on domain restart. Allowed values are
|
|
"on" and "off" (default). <span class="since">Since 1.3.1</span>.
|
|
</p>
|
|
|
|
<p>
|
|
Regardless of the <code>type</code>, character devices can
|
|
have an optional log file associated with them. This is
|
|
expressed via a <code>log</code> sub-element, with a
|
|
<code>file</code> attribute. There can also be an <code>append</code>
|
|
attribute which takes the same values described above.
|
|
<span class="since">Since 1.3.3</span>.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<log file="/var/log/libvirt/qemu/guestname-serial0.log" append="off"/>
|
|
...</pre>
|
|
|
|
<p>
|
|
Each character device element has an optional
|
|
sub-element <code><address></code> which can tie the
|
|
device to a
|
|
particular <a href="#elementsControllers">controller</a> or PCI
|
|
slot.
|
|
</p>
|
|
|
|
<p>
|
|
For character device with type <code>unix</code> or <code>tcp</code>
|
|
the <code>source</code> has an optional element <code>reconnect</code>
|
|
which configures reconnect timeout if the connection is lost.
|
|
There are two attributes, <code>enabled</code> where possible
|
|
values are "yes" and "no" and <code>timeout</code> which is in
|
|
seconds. The <code>reconnect</code> attribute is valid only
|
|
for <code>connect</code> mode.
|
|
<span class="since">Since 3.7.0 (QEMU driver only)</span>.
|
|
</p>
|
|
|
|
<h5><a id="elementsCharGuestInterface">Guest interface</a></h5>
|
|
|
|
<p>
|
|
A character device presents itself to the guest as one of the following
|
|
types.
|
|
</p>
|
|
|
|
<h6><a id="elementCharParallel">Parallel port</a></h6>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<parallel type='pty'>
|
|
<source path='/dev/pts/2'/>
|
|
<target port='0'/>
|
|
</parallel>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
<code>target</code> can have a <code>port</code> attribute, which
|
|
specifies the port number. Ports are numbered starting from 0. There are
|
|
usually 0, 1 or 2 parallel ports.
|
|
</p>
|
|
|
|
<h6><a id="elementCharSerial">Serial port</a></h6>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<!-- Serial port -->
|
|
<serial type='pty'>
|
|
<source path='/dev/pts/3'/>
|
|
<target port='0'/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<!-- USB serial port -->
|
|
<serial type='pty'>
|
|
<target type='usb-serial' port='0'>
|
|
<model name='usb-serial'/>
|
|
</target>
|
|
<address type='usb' bus='0' port='1'/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
The <code>target</code> element can have an optional <code>port</code>
|
|
attribute, which specifies the port number (starting from 0), and an
|
|
optional <code>type</code> attribute: valid values are,
|
|
<span class="since">since 1.0.2</span>, <code>isa-serial</code> (usable
|
|
with x86 guests), <code>usb-serial</code> (usable whenever USB support
|
|
is available) and <code>pci-serial</code> (usable whenever PCI support
|
|
is available); <span class="since">since 3.10.0</span>,
|
|
<code>spapr-vio-serial</code> (usable with ppc64/pseries guests),
|
|
<code>system-serial</code> (usable with aarch64/virt and,
|
|
<span class="since">since 4.7.0</span>, riscv/virt guests) and
|
|
<code>sclp-serial</code> (usable with s390 and s390x guests) are
|
|
available as well.
|
|
</p>
|
|
|
|
<p>
|
|
<span class="since">Since 3.10.0</span>, the <code>target</code>
|
|
element can have an optional <code>model</code> subelement;
|
|
valid values for its <code>name</code> attribute are:
|
|
<code>isa-serial</code> (usable with the <code>isa-serial</code> target
|
|
type); <code>usb-serial</code> (usable with the <code>usb-serial</code>
|
|
target type); <code>pci-serial</code>
|
|
(usable with the <code>pci-serial</code> target type);
|
|
<code>spapr-vty</code> (usable with the <code>spapr-vio-serial</code>
|
|
target type); <code>pl011</code> and,
|
|
<span class="since">since 4.7.0</span>, <code>16550a</code> (usable
|
|
with the <code>system-serial</code> target type);
|
|
<code>sclpconsole</code> and <code>sclplmconsole</code> (usable with
|
|
the <code>sclp-serial</code> target type).
|
|
</p>
|
|
|
|
<p>
|
|
If any of the attributes is not specified by the user, libvirt will
|
|
choose a value suitable for most users.
|
|
</p>
|
|
|
|
<p>
|
|
Most target types support configuring the guest-visible device
|
|
address as <a href="#elementsAddress">documented above</a>; more
|
|
specifically, acceptable address types are <code>isa</code> (for
|
|
<code>isa-serial</code>), <code>usb</code> (for <code>usb-serial</code>),
|
|
<code>pci</code> (for <code>pci-serial</code>) and <code>spapr-vio</code>
|
|
(for <code>spapr-vio-serial</code>). The <code>system-serial</code>
|
|
and <code>sclp-serial</code> target types don't support specifying an
|
|
address.
|
|
</p>
|
|
|
|
<p>
|
|
For the relationship between serial ports and consoles,
|
|
<a href="#elementCharSerialAndConsole">see below</a>.
|
|
</p>
|
|
|
|
<h6><a id="elementCharConsole">Console</a></h6>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<!-- Serial console -->
|
|
<console type='pty'>
|
|
<source path='/dev/pts/2'/>
|
|
<target type='serial' port='0'/>
|
|
</console>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<!-- KVM virtio console -->
|
|
<console type='pty'>
|
|
<source path='/dev/pts/5'/>
|
|
<target type='virtio' port='0'/>
|
|
</console>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
The <code>console</code> element is used to represent interactive
|
|
serial consoles. Depending on the type of guest in use and the specifics
|
|
of the configuration, the <code>console</code> element might represent
|
|
the same device as an existing <code>serial</code> element or a separate
|
|
device.
|
|
</p>
|
|
|
|
<p>
|
|
A <code>target</code> subelement is supported and works the same
|
|
way as with the <code>serial</code> element
|
|
(<a href="#elementCharSerial">see above</a> for details).
|
|
Valid values for the <code>type</code> attribute are:
|
|
<code>serial</code> (described below);
|
|
<code>virtio</code> (usable whenever VirtIO support is available);
|
|
<code>xen</code>, <code>lxc</code> and <code>openvz</code>
|
|
(available when the corresponding hypervisor is in use).
|
|
<code>sclp</code> and <code>sclplm</code> (usable for s390 and
|
|
s390x QEMU guests) are supported for compatibility reasons but should
|
|
not be used for new guests: use the <code>sclpconsole</code> and
|
|
<code>sclplmconsole</code> target models, respectively, with the
|
|
<code>serial</code> element instead.
|
|
</p>
|
|
|
|
<p>
|
|
Of the target types listed above, <code>serial</code> is special in
|
|
that it doesn't represents a separate device, but rather the same
|
|
device as the first <code>serial</code> element. Due to this, there can
|
|
only be a single <code>console</code> element with target type
|
|
<code>serial</code> per guest.
|
|
</p>
|
|
|
|
<p>
|
|
Virtio consoles are usually accessible as <code>/dev/hvc[0-7]</code>
|
|
from inside the guest; for more information, see
|
|
<a href="http://fedoraproject.org/wiki/Features/VirtioSerial">http://fedoraproject.org/wiki/Features/VirtioSerial</a>.
|
|
<span class="since">Since 0.8.3</span>
|
|
</p>
|
|
|
|
<p>
|
|
For the relationship between serial ports and consoles,
|
|
<a href="#elementCharSerialAndConsole">see below</a>.
|
|
</p>
|
|
|
|
<h6><a id="elementCharSerialAndConsole">Relationship between serial ports and consoles</a></h6>
|
|
|
|
<p>
|
|
Due to hystorical reasons, the <code>serial</code> and
|
|
<code>console</code> elements have partially overlapping scopes.
|
|
</p>
|
|
|
|
<p>
|
|
In general, both elements are used to configure one or more serial
|
|
consoles to be used for interacting with the guest. The main difference
|
|
between the two is that <code>serial</code> is used for emulated,
|
|
usually native, serial consoles, whereas <code>console</code> is used
|
|
for paravirtualized ones.
|
|
</p>
|
|
|
|
<p>
|
|
Both emulated and paravirtualized serial consoles have advantages and
|
|
disadvantages:
|
|
</p>
|
|
|
|
<ul>
|
|
<li>
|
|
emulated serial consoles are usually initialized much earlier than
|
|
paravirtualized ones, so they can be used to control the bootloader
|
|
and display both firmware and early boot messages;
|
|
</li>
|
|
<li>
|
|
on several platforms, there can only be a single emulated serial
|
|
console per guest but paravirtualized consoles don't suffer from the
|
|
same limitation.
|
|
</li>
|
|
</ul>
|
|
|
|
<p>
|
|
A configuration such as:
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<console type='pty'>
|
|
<target type='serial'/>
|
|
</console>
|
|
<console type='pty'>
|
|
<target type='virtio'/>
|
|
</console>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
will work on any platform and will result in one emulated serial console
|
|
for early boot logging / interactive / recovery use, and one
|
|
paravirtualized serial console to be used eg. as a side channel. Most
|
|
people will be fine with having just the first <code>console</code>
|
|
element in their configuration.
|
|
</p>
|
|
|
|
<p>
|
|
Note that, due to the compatibility concerns mentioned earlier, all the
|
|
following configurations:
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type='pty'/>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<console type='pty'/>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type='pty'/>
|
|
<console type='pty'/>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
will be treated the same and will result in a single emulated serial
|
|
console being available to the guest.
|
|
</p>
|
|
|
|
<h6><a id="elementCharChannel">Channel</a></h6>
|
|
|
|
<p>
|
|
This represents a private communication channel between the host and the
|
|
guest.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<channel type='unix'>
|
|
<source mode='bind' path='/tmp/guestfwd'/>
|
|
<target type='guestfwd' address='10.0.2.1' port='4600'/>
|
|
</channel>
|
|
|
|
<!-- KVM virtio channel -->
|
|
<channel type='pty'>
|
|
<target type='virtio' name='arbitrary.virtio.serial.port.name'/>
|
|
</channel>
|
|
<channel type='unix'>
|
|
<source mode='bind' path='/var/lib/libvirt/qemu/f16x86_64.agent'/>
|
|
<target type='virtio' name='org.qemu.guest_agent.0' state='connected'/>
|
|
</channel>
|
|
<channel type='spicevmc'>
|
|
<target type='virtio' name='com.redhat.spice.0'/>
|
|
</channel>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
This can be implemented in a variety of ways. The specific type of
|
|
channel is given in the <code>type</code> attribute of the
|
|
<code>target</code> element. Different channel types have different
|
|
<code>target</code> attributes.
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>guestfwd</code></dt>
|
|
<dd>TCP traffic sent by the guest to a given IP address and port is
|
|
forwarded to the channel device on the host. The <code>target</code>
|
|
element must have <code>address</code> and <code>port</code> attributes.
|
|
<span class="since">Since 0.7.3</span></dd>
|
|
|
|
<dt><code>virtio</code></dt>
|
|
<dd>Paravirtualized virtio channel. Channel is exposed in the guest under
|
|
/dev/vport*, and if the optional element <code>name</code> is specified,
|
|
/dev/virtio-ports/$name (for more info, please see
|
|
<a href="http://fedoraproject.org/wiki/Features/VirtioSerial">http://fedoraproject.org/wiki/Features/VirtioSerial</a>). The
|
|
optional element <code>address</code> can tie the channel to a
|
|
particular <code>type='virtio-serial'</code>
|
|
controller, <a href="#elementsAddress">documented above</a>.
|
|
With qemu, if <code>name</code> is "org.qemu.guest_agent.0",
|
|
then libvirt can interact with a guest agent installed in the
|
|
guest, for actions such as guest shutdown or file system quiescing.
|
|
<span class="since">Since 0.7.7, guest agent interaction
|
|
since 0.9.10</span> Moreover, <span class="since">since 1.0.6</span>
|
|
it is possible to have source path auto generated for virtio unix channels.
|
|
This is very useful in case of a qemu guest agent, where users don't
|
|
usually care about the source path since it's libvirt who talks to
|
|
the guest agent. In case users want to utilize this feature, they should
|
|
leave <code><source></code> element out. <span class="since">Since
|
|
1.2.11</span> the active XML for a virtio channel may contain an optional
|
|
<code>state</code> attribute that reflects whether a process in the
|
|
guest is active on the channel. This is an output-only attribute.
|
|
Possible values for the <code>state</code> attribute are
|
|
<code>connected</code> and <code>disconnected</code>.
|
|
</dd>
|
|
<dt><code>xen</code></dt>
|
|
<dd> Paravirtualized Xen channel. Channel is exposed in the guest as a
|
|
Xen console but identified with a name. Setup and consumption of a Xen
|
|
channel depends on software and configuration in the guest
|
|
(for more info, please see <a href="http://xenbits.xen.org/docs/unstable/misc/channel.txt">http://xenbits.xen.org/docs/unstable/misc/channel.txt</a>).
|
|
Channel source path semantics are the same as the virtio target type.
|
|
The <code>state</code> attribute is not supported since Xen channels
|
|
lack the necessary probing mechanism.
|
|
<span class="since">Since 2.3.0</span>
|
|
</dd>
|
|
<dt><code>spicevmc</code></dt>
|
|
<dd>Paravirtualized SPICE channel. The domain must also have a
|
|
SPICE server as a <a href="#elementsGraphics">graphics
|
|
device</a>, at which point the host piggy-backs messages
|
|
across the <code>main</code> channel. The <code>target</code>
|
|
element must be present, with
|
|
attribute <code>type='virtio'</code>; an optional
|
|
attribute <code>name</code> controls how the guest will have
|
|
access to the channel, and defaults
|
|
to <code>name='com.redhat.spice.0'</code>. The
|
|
optional <code>address</code> element can tie the channel to a
|
|
particular <code>type='virtio-serial'</code> controller.
|
|
<span class="since">Since 0.8.8</span></dd>
|
|
</dl>
|
|
|
|
<h5><a id="elementsCharHostInterface">Host interface</a></h5>
|
|
|
|
<p>
|
|
A character device presents itself to the host as one of the following
|
|
types.
|
|
</p>
|
|
|
|
<h6><a id="elementsCharSTDIO">Domain logfile</a></h6>
|
|
|
|
<p>
|
|
This disables all input on the character device, and sends output
|
|
into the virtual machine's logfile
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<console type='stdio'>
|
|
<target port='1'/>
|
|
</console>
|
|
</devices>
|
|
...</pre>
|
|
|
|
|
|
<h6><a id="elementsCharFle">Device logfile</a></h6>
|
|
|
|
<p>
|
|
A file is opened and all data sent to the character
|
|
device is written to the file.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type="file">
|
|
<source path="/var/log/vm/vm-serial.log"/>
|
|
<target port="1"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h6><a id="elementsCharVC">Virtual console</a></h6>
|
|
|
|
<p>
|
|
Connects the character device to the graphical framebuffer in
|
|
a virtual console. This is typically accessed via a special
|
|
hotkey sequence such as "ctrl+alt+3"
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type='vc'>
|
|
<target port="1"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h6><a id="elementsCharNull">Null device</a></h6>
|
|
|
|
<p>
|
|
Connects the character device to the void. No data is ever
|
|
provided to the input. All data written is discarded.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type='null'>
|
|
<target port="1"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h6><a id="elementsCharPTY">Pseudo TTY</a></h6>
|
|
|
|
<p>
|
|
A Pseudo TTY is allocated using /dev/ptmx. A suitable client
|
|
such as 'virsh console' can connect to interact with the
|
|
serial port locally.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type="pty">
|
|
<source path="/dev/pts/3"/>
|
|
<target port="1"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
NB special case if <console type='pty'>, then the TTY
|
|
path is also duplicated as an attribute tty='/dev/pts/3'
|
|
on the top level <console> tag. This provides compat
|
|
with existing syntax for <console> tags.
|
|
</p>
|
|
|
|
<h6><a id="elementsCharHost">Host device proxy</a></h6>
|
|
|
|
<p>
|
|
The character device is passed through to the underlying
|
|
physical character device. The device types must match,
|
|
eg the emulated serial port should only be connected to
|
|
a host serial port - don't connect a serial port to a parallel
|
|
port.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type="dev">
|
|
<source path="/dev/ttyS0"/>
|
|
<target port="1"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h6><a id="elementsCharPipe">Named pipe</a></h6>
|
|
|
|
<p>
|
|
The character device writes output to a named pipe. See pipe(7) for
|
|
more info.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type="pipe">
|
|
<source path="/tmp/mypipe"/>
|
|
<target port="1"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h6><a id="elementsCharTCP">TCP client/server</a></h6>
|
|
|
|
<p>
|
|
The character device acts as a TCP client connecting to a
|
|
remote server.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type="tcp">
|
|
<source mode="connect" host="0.0.0.0" service="2445"/>
|
|
<protocol type="raw"/>
|
|
<target port="1"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
Or as a TCP server waiting for a client connection.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type="tcp">
|
|
<source mode="bind" host="127.0.0.1" service="2445"/>
|
|
<protocol type="raw"/>
|
|
<target port="1"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
Alternatively you can use <code>telnet</code> instead
|
|
of <code>raw</code> TCP in order to utilize the telnet protocol
|
|
for the connection.
|
|
</p>
|
|
<p>
|
|
<span class="since">Since 0.8.5,</span> some hypervisors support
|
|
use of either <code>telnets</code> (secure telnet) or <code>tls</code>
|
|
(via secure sockets layer) as the transport protocol for connections.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type="tcp">
|
|
<source mode="connect" host="0.0.0.0" service="2445"/>
|
|
<protocol type="telnet"/>
|
|
<target port="1"/>
|
|
</serial>
|
|
...
|
|
<serial type="tcp">
|
|
<source mode="bind" host="127.0.0.1" service="2445"/>
|
|
<protocol type="telnet"/>
|
|
<target port="1"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
<span class="since">Since 2.4.0,</span> the optional attribute
|
|
<code>tls</code> can be used to control whether a chardev
|
|
TCP communication channel would utilize a hypervisor configured
|
|
TLS X.509 certificate environment in order to encrypt the data
|
|
channel. For the QEMU hypervisor, usage of a TLS environment can
|
|
be controlled on the host by the <code>chardev_tls</code> and
|
|
<code>chardev_tls_x509_cert_dir</code> or
|
|
<code>default_tls_x509_cert_dir</code> settings in the file
|
|
/etc/libvirt/qemu.conf. If <code>chardev_tls</code> is enabled,
|
|
then unless the <code>tls</code> attribute is set to "no", libvirt
|
|
will use the host configured TLS environment.
|
|
If <code>chardev_tls</code> is disabled, but the <code>tls</code>
|
|
attribute is set to "yes", then libvirt will attempt to use the
|
|
host TLS environment if either the <code>chardev_tls_x509_cert_dir</code>
|
|
or <code>default_tls_x509_cert_dir</code> TLS directory structure exists.
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type="tcp">
|
|
<source mode='connect' host="127.0.0.1" service="5555" tls="yes"/>
|
|
<protocol type="raw"/>
|
|
<target port="0"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h6><a id="elementsCharUDP">UDP network console</a></h6>
|
|
|
|
<p>
|
|
The character device acts as a UDP netconsole service,
|
|
sending and receiving packets. This is a lossy service.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type="udp">
|
|
<source mode="bind" host="0.0.0.0" service="2445"/>
|
|
<source mode="connect" host="0.0.0.0" service="2445"/>
|
|
<target port="1"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h6><a id="elementsCharUNIX">UNIX domain socket client/server</a></h6>
|
|
|
|
<p>
|
|
The character device acts as a UNIX domain socket server,
|
|
accepting connections from local clients.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type="unix">
|
|
<source mode="bind" path="/tmp/foo"/>
|
|
<target port="1"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h6><a id="elementsCharSpiceport">Spice channel</a></h6>
|
|
|
|
<p>
|
|
The character device is accessible through spice connection
|
|
under a channel name specified in the <code>channel</code>
|
|
attribute. <span class="since">Since 1.2.2</span>
|
|
</p>
|
|
<p>
|
|
Note: depending on the hypervisor, spiceports might (or might not)
|
|
be enabled on domains with or without <a href="#elementsGraphics">spice
|
|
graphics</a>.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type="spiceport">
|
|
<source channel="org.qemu.console.serial.0"/>
|
|
<target port="1"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<h6><a id="elementsNmdm">Nmdm device</a></h6>
|
|
|
|
<p>
|
|
The nmdm device driver, available on FreeBSD, provides two
|
|
tty devices connected together by a virtual null modem cable.
|
|
<span class="since">Since 1.2.4</span>
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<serial type="nmdm">
|
|
<source master="/dev/nmdm0A" slave="/dev/nmdm0B"/>
|
|
</serial>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
The <code>source</code> element has these attributes:
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>master</code></dt>
|
|
<dd>Master device of the pair, that is passed to the hypervisor.
|
|
Device is specified by a fully qualified path.</dd>
|
|
|
|
<dt><code>slave</code></dt>
|
|
<dd>Slave device of the pair, that is passed to the clients for connection
|
|
to the guest console. Device is specified by a fully qualified path.</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsSound">Sound devices</a></h4>
|
|
|
|
<p>
|
|
A virtual sound card can be attached to the host via the
|
|
<code>sound</code> element. <span class="since">Since 0.4.3</span>
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<sound model='es1370'/>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>sound</code></dt>
|
|
<dd>
|
|
The <code>sound</code> element has one mandatory attribute,
|
|
<code>model</code>, which specifies what real sound device is emulated.
|
|
Valid values are specific to the underlying hypervisor, though typical
|
|
choices are 'es1370', 'sb16', 'ac97', 'ich6' and 'usb'.
|
|
(<span class="since">
|
|
'ac97' only since 0.6.0, 'ich6' only since 0.8.8,
|
|
'usb' only since 1.2.7</span>)
|
|
</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
<span class="since">Since 0.9.13</span>, a sound element
|
|
with <code>ich6</code> model can have optional
|
|
sub-elements <code><codec></code> to attach various audio
|
|
codecs to the audio device. If not specified, a default codec
|
|
will be attached to allow playback and recording.
|
|
</p>
|
|
<p>
|
|
Valid values are:
|
|
</p>
|
|
<p>
|
|
<ul>
|
|
<li>'duplex' - advertise a line-in and a line-out </li>
|
|
<li>'micro' - advertise a speaker and a microphone </li>
|
|
<li>'output' - advertise a line-out
|
|
<span class="since">Since 4.4.0</span></li>
|
|
</ul>
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<sound model='ich6'>
|
|
<codec type='micro'/>
|
|
</sound>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
Each <code>sound</code> element has an optional
|
|
sub-element <code><address></code> which can tie the
|
|
device to a particular PCI
|
|
slot, <a href="#elementsAddress">documented above</a>.
|
|
</p>
|
|
|
|
<h4><a id="elementsWatchdog">Watchdog device</a></h4>
|
|
|
|
<p>
|
|
A virtual hardware watchdog device can be added to the guest via
|
|
the <code>watchdog</code> element.
|
|
<span class="since">Since 0.7.3, QEMU and KVM only</span>
|
|
</p>
|
|
|
|
<p>
|
|
The watchdog device requires an additional driver and management
|
|
daemon in the guest. Just enabling the watchdog in the libvirt
|
|
configuration does not do anything useful on its own.
|
|
</p>
|
|
|
|
<p>
|
|
Currently libvirt does not support notification when the
|
|
watchdog fires. This feature is planned for a future version of
|
|
libvirt.
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<watchdog model='i6300esb'/>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<watchdog model='i6300esb' action='poweroff'/>
|
|
</devices>
|
|
</domain></pre>
|
|
|
|
<dl>
|
|
<dt><code>model</code></dt>
|
|
<dd>
|
|
<p>
|
|
The required <code>model</code> attribute specifies what real
|
|
watchdog device is emulated. Valid values are specific to the
|
|
underlying hypervisor.
|
|
</p>
|
|
<p>
|
|
QEMU and KVM support:
|
|
</p>
|
|
<ul>
|
|
<li>'i6300esb' - the recommended device,
|
|
emulating a PCI Intel 6300ESB </li>
|
|
<li>'ib700' - emulating an ISA iBase IB700 </li>
|
|
<li>'diag288' - emulating an S390 DIAG288 device
|
|
<span class="since">Since 1.2.17</span></li>
|
|
</ul>
|
|
</dd>
|
|
<dt><code>action</code></dt>
|
|
<dd>
|
|
<p>
|
|
The optional <code>action</code> attribute describes what
|
|
action to take when the watchdog expires. Valid values are
|
|
specific to the underlying hypervisor.
|
|
</p>
|
|
<p>
|
|
QEMU and KVM support:
|
|
</p>
|
|
<ul>
|
|
<li>'reset' - default, forcefully reset the guest</li>
|
|
<li>'shutdown' - gracefully shutdown the guest
|
|
(not recommended) </li>
|
|
<li>'poweroff' - forcefully power off the guest</li>
|
|
<li>'pause' - pause the guest</li>
|
|
<li>'none' - do nothing</li>
|
|
<li>'dump' - automatically dump the guest
|
|
<span class="since">Since 0.8.7</span></li>
|
|
<li>'inject-nmi' - inject a non-maskable interrupt
|
|
into the guest
|
|
<span class="since">Since 1.2.17</span></li>
|
|
</ul>
|
|
<p>
|
|
Note 1: the 'shutdown' action requires that the guest
|
|
is responsive to ACPI signals. In the sort of situations
|
|
where the watchdog has expired, guests are usually unable
|
|
to respond to ACPI signals. Therefore using 'shutdown'
|
|
is not recommended.
|
|
</p>
|
|
<p>
|
|
Note 2: the directory to save dump files can be configured
|
|
by <code>auto_dump_path</code> in file /etc/libvirt/qemu.conf.
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsMemBalloon">Memory balloon device</a></h4>
|
|
|
|
<p>
|
|
A virtual memory balloon device is added to all Xen and KVM/QEMU
|
|
guests. It will be seen as <code>memballoon</code> element.
|
|
It will be automatically added when appropriate, so there is no
|
|
need to explicitly add this element in the guest XML unless a
|
|
specific PCI slot needs to be assigned.
|
|
<span class="since">Since 0.8.3, Xen, QEMU and KVM only</span>
|
|
Additionally, <span class="since">since 0.8.4</span>, if the
|
|
memballoon device needs to be explicitly disabled,
|
|
<code>model='none'</code> may be used.
|
|
</p>
|
|
|
|
<p>
|
|
Example: automatically added device with KVM
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<memballoon model='virtio'/>
|
|
</devices>
|
|
...</pre>
|
|
|
|
<p>
|
|
Example: manually added device with static PCI slot 2 requested
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<memballoon model='virtio'>
|
|
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
|
|
<stats period='10'/>
|
|
<driver iommu='on' ats='on'/>
|
|
</memballoon>
|
|
</devices>
|
|
</domain></pre>
|
|
|
|
<dl>
|
|
<dt><code>model</code></dt>
|
|
<dd>
|
|
<p>
|
|
The required <code>model</code> attribute specifies what type
|
|
of balloon device is provided. Valid values are specific to
|
|
the virtualization platform
|
|
</p>
|
|
<ul>
|
|
<li>'virtio' - default with QEMU/KVM</li>
|
|
<li>'virtio-transitional' <span class="since">Since 5.2.0</span></li>
|
|
<li>'virtio-non-transitional' <span class="since">Since 5.2.0</span></li>
|
|
<li>'xen' - default with Xen</li>
|
|
</ul>
|
|
See <a href="#elementsVirtioTransitional">Virtio transitional devices</a>
|
|
for more details.
|
|
</dd>
|
|
<dt><code>autodeflate</code></dt>
|
|
<dd>
|
|
<p>
|
|
The optional <code>autodeflate</code> attribute allows to
|
|
enable/disable (values "on"/"off", respectively) the ability of the
|
|
QEMU virtio memory balloon to release some memory at the last moment
|
|
before a guest's process get killed by Out of Memory killer.
|
|
<span class="since">Since 1.3.1, QEMU and KVM only</span>
|
|
</p>
|
|
</dd>
|
|
<dt><code>period</code></dt>
|
|
<dd>
|
|
<p>
|
|
The optional <code>period</code> allows the QEMU virtio memory balloon
|
|
driver to provide statistics through the <code>virsh dommemstat
|
|
[domain]</code> command. By default, collection is not enabled. In
|
|
order to enable, use the <code>virsh dommemstat [domain] --period
|
|
[number]</code> command or <code>virsh edit</code> command to add the
|
|
option to the XML definition. The <code>virsh dommemstat</code> will
|
|
accept the options <code>--live</code>, <code>--current</code>,
|
|
or <code>--config</code>. If an option is not provided, the change
|
|
for a running domain will only be made to the active guest. If the
|
|
QEMU driver is not at the right revision, the attempt to set the
|
|
period will fail. Large values (e.g. many years) might be ignored.
|
|
<span class='since'>Since 1.1.1, requires QEMU 1.5</span>
|
|
</p>
|
|
</dd>
|
|
<dt><code>driver</code></dt>
|
|
<dd>
|
|
For model <code>virtio</code> memballoon,
|
|
<a href="#elementsVirtio">Virtio-specific options</a> can also be
|
|
set. (<span class="since">Since 3.5.0</span>)
|
|
</dd>
|
|
</dl>
|
|
<h4><a id="elementsRng">Random number generator device</a></h4>
|
|
|
|
<p>
|
|
The virtual random number generator device allows the host to pass
|
|
through entropy to guest operating systems.
|
|
<span class="since">Since 1.0.3</span>
|
|
</p>
|
|
|
|
<p>
|
|
Example: usage of the RNG device:
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<rng model='virtio'>
|
|
<rate period="2000" bytes="1234"/>
|
|
<backend model='random'>/dev/random</backend>
|
|
<!-- OR -->
|
|
<backend model='egd' type='udp'>
|
|
<source mode='bind' service='1234'/>
|
|
<source mode='connect' host='1.2.3.4' service='1234'/>
|
|
</backend>
|
|
</rng>
|
|
</devices>
|
|
...
|
|
</pre>
|
|
<dl>
|
|
<dt><code>model</code></dt>
|
|
<dd>
|
|
<p>
|
|
The required <code>model</code> attribute specifies what type
|
|
of RNG device is provided. Valid values are specific to
|
|
the virtualization platform:
|
|
</p>
|
|
<ul>
|
|
<li>'virtio' - supported by qemu and virtio-rng kernel module</li>
|
|
<li>'virtio-transitional' <span class='since'>Since 5.2.0</span></li>
|
|
<li>'virtio-non-transitional' <span class='since'>Since 5.2.0</span></li>
|
|
</ul>
|
|
See <a href="#elementsVirtioTransitional">Virtio transitional devices</a>
|
|
for more details.
|
|
</dd>
|
|
<dt><code>rate</code></dt>
|
|
<dd>
|
|
<p>
|
|
The optional <code>rate</code> element allows limiting the rate at
|
|
which entropy can be consumed from the source. The mandatory
|
|
attribute <code>bytes</code> specifies how many bytes are permitted
|
|
to be consumed per period. An optional <code>period</code> attribute
|
|
specifies the duration of a period in milliseconds; if omitted, the
|
|
period is taken as 1000 milliseconds (1 second).
|
|
<span class='since'>Since 1.0.4</span>
|
|
</p>
|
|
</dd>
|
|
<dt><code>backend</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>backend</code> element specifies the source of entropy
|
|
to be used for the domain. The source model is configured using the
|
|
<code>model</code> attribute. Supported source models are:
|
|
</p>
|
|
<dl>
|
|
<dt><code>random</code></dt>
|
|
<dd>
|
|
<p>
|
|
This backend type expects a non-blocking character device
|
|
as input. The file name is specified as contents of the
|
|
<code>backend</code> element. <span class='since'>Since
|
|
1.3.4</span> any path is accepted. Before that
|
|
<code>/dev/random</code> and <code>/dev/hwrng</code> were
|
|
the only accepted paths. When no file name is specified,
|
|
the hypervisor default is used. For QEMU, the default is
|
|
<code>/dev/random</code>. However, the recommended source
|
|
of entropy is <code>/dev/urandom</code> (as it doesn't
|
|
have the limitations of <code>/dev/random</code>).
|
|
</p>
|
|
</dd>
|
|
<dt><code>egd</code></dt>
|
|
<dd>
|
|
<p>
|
|
This backend connects to a source using the EGD protocol.
|
|
The source is specified as a character device. Refer to
|
|
<a href='#elementsCharHostInterface'>character device host interface</a>
|
|
for more information.
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>driver</code></dt>
|
|
<dd>
|
|
The subelement <code>driver</code> can be used to tune the device:
|
|
<dl>
|
|
<dt>virtio options</dt>
|
|
<dd>
|
|
<a href="#elementsVirtio">Virtio-specific options</a> can also be
|
|
set. (<span class="since">Since 3.5.0</span>)
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
|
|
</dl>
|
|
|
|
<h4><a id="elementsTpm">TPM device</a></h4>
|
|
|
|
<p>
|
|
The TPM device enables a QEMU guest to have access to TPM
|
|
functionality. The TPM device may either be a TPM 1.2 or
|
|
a TPM 2.0.
|
|
</p>
|
|
<p>
|
|
The TPM passthrough device type provides access to the host's TPM
|
|
for one QEMU guest. No other software may be using the TPM device,
|
|
typically /dev/tpm0, at the time the QEMU guest is started.
|
|
<span class="since">'passthrough' since 1.0.5</span>
|
|
</p>
|
|
|
|
<p>
|
|
Example: usage of the TPM passthrough device
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<tpm model='tpm-tis'>
|
|
<backend type='passthrough'>
|
|
<device path='/dev/tpm0'/>
|
|
</backend>
|
|
</tpm>
|
|
</devices>
|
|
...
|
|
</pre>
|
|
|
|
<p>
|
|
The emulator device type gives access to a TPM emulator providing
|
|
TPM functionality for each VM. QEMU talks to it over a Unix socket. With
|
|
the emulator device type each guest gets its own private TPM.
|
|
<span class="since">'emulator' since 4.5.0</span>
|
|
The state of the TPM emulator can be encrypted by providing an
|
|
<code>encryption</code> element.
|
|
<span class="since">'encryption' since 5.6.0</span>
|
|
</p>
|
|
<p>
|
|
Example: usage of the TPM Emulator
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<tpm model='tpm-tis'>
|
|
<backend type='emulator' version='2.0'>
|
|
<encryption secret='6dd3e4a5-1d76-44ce-961f-f119f5aad935'/>
|
|
</backend>
|
|
</tpm>
|
|
</devices>
|
|
...
|
|
</pre>
|
|
<dl>
|
|
<dt><code>model</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>model</code> attribute specifies what device
|
|
model QEMU provides to the guest. If no model name is provided,
|
|
<code>tpm-tis</code> will automatically be chosen.
|
|
<span class="since">Since 4.4.0</span>, another available choice
|
|
is the <code>tpm-crb</code>, which should only be used when the
|
|
backend device is a TPM 2.0.
|
|
</p>
|
|
</dd>
|
|
<dt><code>backend</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>backend</code> element specifies the type of
|
|
TPM device. The following types are supported:
|
|
</p>
|
|
<dl>
|
|
<dt><code>passthrough</code></dt>
|
|
<dd>
|
|
<p>
|
|
Use the host's TPM device.
|
|
</p>
|
|
<p>
|
|
This backend type requires exclusive access to a TPM device on
|
|
the host. An example for such a device is /dev/tpm0. The fully
|
|
qualified file name is specified by path attribute of the
|
|
<code>source</code> element. If no file name is specified then
|
|
/dev/tpm0 is automatically used.
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
<dl>
|
|
<dt><code>emulator</code></dt>
|
|
<dd>
|
|
<p>
|
|
For this backend type the 'swtpm' TPM Emulator must be installed on the
|
|
host. Libvirt will automatically start an independent TPM emulator
|
|
for each QEMU guest requesting access to it.
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>version</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>version</code> attribute indicates the version
|
|
of the TPM. By default a TPM 1.2 is created. This attribute
|
|
only works with the <code>emulator</code> backend. The following
|
|
versions are supported:
|
|
</p>
|
|
<ul>
|
|
<li>'1.2' : creates a TPM 1.2</li>
|
|
<li>'2.0' : creates a TPM 2.0</li>
|
|
</ul>
|
|
</dd>
|
|
<dt><code>encryption</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>encryption</code> element allows the state of a TPM emulator
|
|
to be encrypted. The <code>secret</code> must reference a secret object
|
|
that holds the passphrase from which the encryption key will be derived.
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsNVRAM">NVRAM device</a></h4>
|
|
<p>
|
|
nvram device is always added to pSeries guest on PPC64, and its address
|
|
is allowed to be changed. Element <code>nvram</code> (only valid for
|
|
pSeries guest, <span class="since">since 1.0.5</span>) is provided to
|
|
enable the address setting.
|
|
</p>
|
|
<p>
|
|
Example: usage of NVRAM configuration
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<nvram>
|
|
<address type='spapr-vio' reg='0x00003000'/>
|
|
</nvram>
|
|
</devices>
|
|
...
|
|
</pre>
|
|
<dl>
|
|
<dt><code>spapr-vio</code></dt>
|
|
<dd>
|
|
<p>
|
|
VIO device address type, only valid for PPC64.
|
|
</p>
|
|
</dd>
|
|
<dt><code>reg</code></dt>
|
|
<dd>
|
|
<p>
|
|
Device address
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsPanic">panic device</a></h4>
|
|
<p>
|
|
panic device enables libvirt to receive panic notification from a QEMU
|
|
guest.
|
|
<span class="since">Since 1.2.1, QEMU and KVM only</span>
|
|
</p>
|
|
<p>
|
|
This feature is always enabled for:
|
|
</p>
|
|
<ul>
|
|
<li>pSeries guests, since it's implemented by the guest firmware</li>
|
|
<li>S390 guests, since it's an integral part of the S390 architecture</li>
|
|
</ul>
|
|
<p>
|
|
For the guest types listed above, libvirt automatically adds a
|
|
<code>panic</code> element to the domain XML.
|
|
</p>
|
|
<p>
|
|
Example: usage of panic configuration
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<panic model='hyperv'/>
|
|
<panic model='isa'>
|
|
<address type='isa' iobase='0x505'/>
|
|
</panic>
|
|
</devices>
|
|
...
|
|
</pre>
|
|
<dl>
|
|
<dt><code>model</code></dt>
|
|
<dd>
|
|
<p>
|
|
The optional <code>model</code> attribute specifies what type
|
|
of panic device is provided. The panic model used when this attribute
|
|
is missing depends on the hypervisor and guest arch.
|
|
</p>
|
|
<ul>
|
|
<li>'isa' - for ISA pvpanic device</li>
|
|
<li>'pseries' - default and valid only for pSeries guests.</li>
|
|
<li>'hyperv' - for Hyper-V crash CPU feature.
|
|
<span class="since">Since 1.3.0, QEMU and KVM only</span></li>
|
|
<li>'s390' - default for S390 guests.
|
|
<span class="since">Since 1.3.5</span></li>
|
|
</ul>
|
|
</dd>
|
|
<dt><code>address</code></dt>
|
|
<dd>
|
|
<p>
|
|
address of panic. The default ioport is 0x505. Most users
|
|
don't need to specify an address, and doing so is forbidden
|
|
altogether for s390, pseries and hyperv models.
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsShmem">Shared memory device</a></h4>
|
|
|
|
<p>
|
|
A shared memory device allows to share a memory region between
|
|
different virtual machines and the host.
|
|
<span class="since">Since 1.2.10, QEMU and KVM only</span>
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<shmem name='my_shmem0'>
|
|
<model type='ivshmem-plain'/>
|
|
<size unit='M'>4</size>
|
|
</shmem>
|
|
<shmem name='shmem_server'>
|
|
<model type='ivshmem-doorbell'/>
|
|
<size unit='M'>2</size>
|
|
<server path='/tmp/socket-shmem'/>
|
|
<msi vectors='32' ioeventfd='on'/>
|
|
</shmem>
|
|
</devices>
|
|
...
|
|
</pre>
|
|
|
|
<dl>
|
|
<dt><code>shmem</code></dt>
|
|
<dd>
|
|
The <code>shmem</code> element has one mandatory attribute,
|
|
<code>name</code> to identify the shared memory. This attribute cannot
|
|
be directory specific to <code>.</code> or <code>..</code> as well as
|
|
it cannot involve path separator <code>/</code>.
|
|
</dd>
|
|
<dt><code>model</code></dt>
|
|
<dd>
|
|
Attribute <code>type</code> of the optional element <code>model</code>
|
|
specifies the model of the underlying device providing the
|
|
<code>shmem</code> device. The models currently supported are
|
|
<code>ivshmem</code> (supports both server and server-less shmem, but is
|
|
deprecated by newer QEMU in favour of the -plain and -doorbell variants),
|
|
<code>ivshmem-plain</code> (only for server-less shmem) and
|
|
<code>ivshmem-doorbell</code> (only for shmem with the server).
|
|
</dd>
|
|
<dt><code>size</code></dt>
|
|
<dd>
|
|
The optional <code>size</code> element specifies the size of the shared
|
|
memory. This must be power of 2 and greater than or equal to 1 MiB.
|
|
</dd>
|
|
<dt><code>server</code></dt>
|
|
<dd>
|
|
The optional <code>server</code> element can be used to configure a server
|
|
socket the device is supposed to connect to. The optional
|
|
<code>path</code> attribute specifies the absolute path to the unix socket
|
|
and defaults to <code>/var/lib/libvirt/shmem/$shmem-$name-sock</code>.
|
|
</dd>
|
|
<dt><code>msi</code></dt>
|
|
<dd>
|
|
The optional <code>msi</code> element enables/disables (values "on"/"off",
|
|
respectively) MSI interrupts. This option can currently be used only
|
|
together with the <code>server</code> element. The <code>vectors</code>
|
|
attribute can be used to specify the number of interrupt
|
|
vectors. The <code>ioeventd</code> attribute enables/disables (values
|
|
"on"/"off", respectively) ioeventfd.
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsMemory">Memory devices</a></h4>
|
|
|
|
<p>
|
|
In addition to the initial memory assigned to the guest, memory devices
|
|
allow additional memory to be assigned to the guest in the form of
|
|
memory modules.
|
|
|
|
A memory device can be hot-plugged or hot-unplugged depending on the
|
|
guests' memory resource needs.
|
|
|
|
Some hypervisors may require NUMA configured for the guest.
|
|
</p>
|
|
|
|
<p>
|
|
Example: usage of the memory devices
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<memory model='dimm' access='private' discard='yes'>
|
|
<target>
|
|
<size unit='KiB'>524287</size>
|
|
<node>0</node>
|
|
</target>
|
|
</memory>
|
|
<memory model='dimm'>
|
|
<source>
|
|
<pagesize unit='KiB'>4096</pagesize>
|
|
<nodemask>1-3</nodemask>
|
|
</source>
|
|
<target>
|
|
<size unit='KiB'>524287</size>
|
|
<node>1</node>
|
|
</target>
|
|
</memory>
|
|
<memory model='nvdimm'>
|
|
<source>
|
|
<path>/tmp/nvdimm</path>
|
|
<alignsize unit='KiB'>2048</alignsize>
|
|
</source>
|
|
<target>
|
|
<size unit='KiB'>524288</size>
|
|
<node>1</node>
|
|
<label>
|
|
<size unit='KiB'>128</size>
|
|
</label>
|
|
<readonly/>
|
|
</target>
|
|
</memory>
|
|
<memory model='nvdimm'>
|
|
<source>
|
|
<path>/dev/dax0.0</path>
|
|
<pmem/>
|
|
</source>
|
|
<target>
|
|
<size unit='KiB'>524288</size>
|
|
<node>1</node>
|
|
<label>
|
|
<size unit='KiB'>128</size>
|
|
</label>
|
|
</target>
|
|
</memory>
|
|
</devices>
|
|
...
|
|
</pre>
|
|
<dl>
|
|
<dt><code>model</code></dt>
|
|
<dd>
|
|
<p>
|
|
Provide <code>dimm</code> to add a virtual DIMM module to the guest.
|
|
<span class="since">Since 1.2.14</span>
|
|
Provide <code>nvdimm</code> model adds a Non-Volatile DIMM
|
|
module. <span class="since">Since 3.2.0</span>
|
|
</p>
|
|
</dd>
|
|
|
|
<dt><code>access</code></dt>
|
|
<dd>
|
|
<p>
|
|
An optional attribute <code>access</code>
|
|
(<span class="since">since 3.2.0</span>) that provides
|
|
capability to fine tune mapping of the memory on per
|
|
module basis. Values are the same as
|
|
<a href="#elementsMemoryBacking">Memory Backing</a>:
|
|
<code>shared</code> and <code>private</code>.
|
|
</p>
|
|
</dd>
|
|
|
|
<dt><code>discard</code></dt>
|
|
<dd>
|
|
<p>
|
|
An optional attribute <code>discard</code>
|
|
(<span class="since">since 4.4.0</span>) that provides
|
|
capability to fine tune discard of data on per module
|
|
basis. Accepted values are <code>yes</code> and
|
|
<code>no</code>. The feature is described here:
|
|
<a href="#elementsMemoryBacking">Memory Backing</a>.
|
|
This attribute is allowed only for
|
|
<code>model='dimm'</code>.
|
|
</p>
|
|
</dd>
|
|
|
|
<dt><code>source</code></dt>
|
|
<dd>
|
|
<p>
|
|
For model <code>dimm</code> this element is optional and allows to
|
|
fine tune the source of the memory used for the given memory device.
|
|
If the element is not provided defaults configured via
|
|
<code>numatune</code> are used. If <code>dimm</code> is provided,
|
|
then the following optional elements can be provided as well:
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>pagesize</code></dt>
|
|
<dd>
|
|
<p>
|
|
This element can be used to override the default
|
|
host page size used for backing the memory device.
|
|
The configured value must correspond to a page size
|
|
supported by the host.
|
|
</p>
|
|
</dd>
|
|
|
|
<dt><code>nodemask</code></dt>
|
|
<dd>
|
|
<p>
|
|
This element can be used to override the default
|
|
set of NUMA nodes where the memory would be
|
|
allocated.
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
|
|
<p>
|
|
For model <code>nvdimm</code> this element is mandatory. The
|
|
mandatory child element <code>path</code> represents a path in
|
|
the host that backs the nvdimm module in the guest. The following
|
|
optional elements may be used:
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>alignsize</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>alignsize</code> element defines the page size
|
|
alignment used to mmap the address range for the backend
|
|
<code>path</code>. If not supplied the host page size is used.
|
|
For example, to mmap a real NVDIMM device a 2M-aligned page may
|
|
be required.
|
|
<span class="since">Since 5.0.0</span>
|
|
</p>
|
|
</dd>
|
|
|
|
<dt><code>pmem</code></dt>
|
|
<dd>
|
|
<p>
|
|
If persistent memory is supported and enabled by the hypervisor
|
|
in order to guarantee the persistence of writes to the vNVDIMM
|
|
backend, then use the <code>pmem</code> element in order to
|
|
utilize the feature.
|
|
<span class="since">Since 5.0.0</span>
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
|
|
<dt><code>target</code></dt>
|
|
<dd>
|
|
<p>
|
|
The mandatory <code>target</code> element configures the placement and
|
|
sizing of the added memory from the perspective of the guest.
|
|
</p>
|
|
<p>
|
|
The mandatory <code>size</code> subelement configures the size of the
|
|
added memory as a scaled integer.
|
|
</p>
|
|
<p>
|
|
The <code>node</code> subelement configures the guest NUMA node to
|
|
attach the memory to. The element shall be used only if the guest has
|
|
NUMA nodes configured.
|
|
</p>
|
|
<p>
|
|
The following optional elements may be used:
|
|
</p>
|
|
|
|
<dl>
|
|
<dt><code>label</code></dt>
|
|
<dd>
|
|
<p>
|
|
For NVDIMM type devices one can optionally use
|
|
<code>label</code> and its subelement <code>size</code>
|
|
to configure the size of namespaces label storage
|
|
within the NVDIMM module. The <code>size</code> element
|
|
has usual meaning described
|
|
<a href="#elementsMemoryAllocation">here</a>.
|
|
For QEMU domains the following restrictions apply:
|
|
</p>
|
|
<ol>
|
|
<li>the minimum label size is 128KiB,</li>
|
|
<li>the remaining size (total-size - label-size) will be aligned
|
|
to 4KiB as default.</li>
|
|
</ol>
|
|
</dd>
|
|
|
|
<dt><code>readonly</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>readonly</code> element is used to mark the vNVDIMM
|
|
as read-only. Only the real NVDIMM device backend can guarantee
|
|
the guest write persistence, so other backend types should use
|
|
the <code>readonly</code> element.
|
|
<span class="since">Since 5.0.0</span>
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h4><a id="elementsIommu">IOMMU devices</a></h4>
|
|
|
|
<p>
|
|
The <code>iommu</code> element can be used to add an IOMMU device.
|
|
<span class="since">Since 2.1.0</span>
|
|
</p>
|
|
|
|
<p>
|
|
Example:
|
|
</p>
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<iommu model='intel'>
|
|
<driver intremap='on'/>
|
|
</iommu>
|
|
</devices>
|
|
...
|
|
</pre>
|
|
<dl>
|
|
<dt><code>model</code></dt>
|
|
<dd>
|
|
<p>
|
|
Supported values are <code>intel</code> (for Q35 guests) and,
|
|
<span class="since">since 5.5.0</span>, <code>smmuv3</code> (for
|
|
ARM virt guests).
|
|
</p>
|
|
</dd>
|
|
<dt><code>driver</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>driver</code> subelement can be used to configure
|
|
additional options, some of which might only be available for
|
|
certain IOMMU models:
|
|
</p>
|
|
<dl>
|
|
<dt><code>intremap</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>intremap</code> attribute with possible values
|
|
<code>on</code> and <code>off</code> can be used to
|
|
turn on interrupt remapping, a part of the VT-d functionality.
|
|
Currently this requires split I/O APIC
|
|
(<code><ioapic driver='qemu'/></code>).
|
|
<span class="since">Since 3.4.0</span> (QEMU/KVM only)
|
|
</p>
|
|
</dd>
|
|
<dt><code>caching_mode</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>caching_mode</code> attribute with possible values
|
|
<code>on</code> and <code>off</code> can be used to
|
|
turn on the VT-d caching mode (useful for assigned devices).
|
|
<span class="since">Since 3.4.0</span> (QEMU/KVM only)
|
|
</p>
|
|
</dd>
|
|
<dt><code>eim</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>eim</code> attribute (with possible values
|
|
<code>on</code> and <code>off</code>) can be used to
|
|
configure Extended Interrupt Mode. A q35 domain with
|
|
split I/O APIC (as described in
|
|
<a href="#elementsFeatures">hypervisor features</a>),
|
|
and both interrupt remapping and EIM turned on for
|
|
the IOMMU, will be able to use more than 255 vCPUs.
|
|
<span class="since">Since 3.4.0</span> (QEMU/KVM only)
|
|
</p>
|
|
</dd>
|
|
<dt><code>iotlb</code></dt>
|
|
<dd>
|
|
<p>
|
|
The <code>iotlb</code> attribute with possible values
|
|
<code>on</code> and <code>off</code> can be used to
|
|
turn on the IOTLB used to cache address translation
|
|
requests from devices.
|
|
<span class="since">Since 3.5.0</span> (QEMU/KVM only)
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h3><a id="vsock">Vsock</a></h3>
|
|
|
|
<p>A vsock host/guest interface. The <code>model</code> attribute
|
|
defaults to <code>virtio</code>. <span class="since">Since 5.2.0</span>
|
|
<code>model</code> can also be 'virtio-transitional' and
|
|
'virtio-non-transitional', see
|
|
<a href="#elementsVirtioTransitional">Virtio transitional devices</a>
|
|
for more details.
|
|
The optional attribute <code>address</code> of the <code>cid</code>
|
|
element specifies the CID assigned to the guest. If the attribute
|
|
<code>auto</code> is set to <code>yes</code>, libvirt
|
|
will assign a free CID automatically on domain startup.
|
|
<span class="since">Since 4.4.0</span></p>
|
|
|
|
<pre>
|
|
...
|
|
<devices>
|
|
<vsock model='virtio'>
|
|
<cid auto='no' address='3'/>
|
|
</vsock>
|
|
</devices>
|
|
...</pre>
|
|
|
|
|
|
<h3><a id="seclabel">Security label</a></h3>
|
|
|
|
<p>
|
|
The <code>seclabel</code> element allows control over the
|
|
operation of the security drivers. There are three basic
|
|
modes of operation, 'dynamic' where libvirt automatically
|
|
generates a unique security label, 'static' where the
|
|
application/administrator chooses the labels, or 'none'
|
|
where confinement is disabled. With dynamic
|
|
label generation, libvirt will always automatically
|
|
relabel any resources associated with the virtual machine.
|
|
With static label assignment, by default, the administrator
|
|
or application must ensure labels are set correctly on any
|
|
resources, however, automatic relabeling can be enabled
|
|
if desired. <span class="since">'dynamic' since 0.6.1, 'static'
|
|
since 0.6.2, and 'none' since 0.9.10.</span>
|
|
</p>
|
|
|
|
<p>
|
|
If more than one security driver is used by libvirt, multiple
|
|
<code>seclabel</code> tags can be used, one for each driver and
|
|
the security driver referenced by each tag can be defined using
|
|
the attribute <code>model</code>
|
|
</p>
|
|
|
|
<p>
|
|
Valid input XML configurations for the top-level security label
|
|
are:
|
|
</p>
|
|
|
|
<pre>
|
|
<seclabel type='dynamic' model='selinux'/>
|
|
|
|
<seclabel type='dynamic' model='selinux'>
|
|
<baselabel>system_u:system_r:my_svirt_t:s0</baselabel>
|
|
</seclabel>
|
|
|
|
<seclabel type='static' model='selinux' relabel='no'>
|
|
<label>system_u:system_r:svirt_t:s0:c392,c662</label>
|
|
</seclabel>
|
|
|
|
<seclabel type='static' model='selinux' relabel='yes'>
|
|
<label>system_u:system_r:svirt_t:s0:c392,c662</label>
|
|
</seclabel>
|
|
|
|
<seclabel type='none'/>
|
|
</pre>
|
|
|
|
<p>
|
|
If no 'type' attribute is provided in the input XML, then
|
|
the security driver default setting will be used, which
|
|
may be either 'none' or 'dynamic'. If a 'baselabel' is set
|
|
but no 'type' is set, then the type is presumed to be 'dynamic'
|
|
</p>
|
|
|
|
<p>
|
|
When viewing the XML for a running guest with automatic
|
|
resource relabeling active, an additional XML element,
|
|
<code>imagelabel</code>, will be included. This is an
|
|
output-only element, so will be ignored in user supplied
|
|
XML documents
|
|
</p>
|
|
<dl>
|
|
<dt><code>type</code></dt>
|
|
<dd>Either <code>static</code>, <code>dynamic</code> or <code>none</code>
|
|
to determine whether libvirt automatically generates a unique security
|
|
label or not.
|
|
</dd>
|
|
<dt><code>model</code></dt>
|
|
<dd>A valid security model name, matching the currently
|
|
activated security model
|
|
</dd>
|
|
<dt><code>relabel</code></dt>
|
|
<dd>Either <code>yes</code> or <code>no</code>. This must always
|
|
be <code>yes</code> if dynamic label assignment is used. With
|
|
static label assignment it will default to <code>no</code>.
|
|
</dd>
|
|
<dt><code>label</code></dt>
|
|
<dd>If static labelling is used, this must specify the full
|
|
security label to assign to the virtual domain. The format
|
|
of the content depends on the security driver in use:
|
|
<ul>
|
|
<li>SELinux: a SELinux context.</li>
|
|
<li>AppArmor: an AppArmor profile.</li>
|
|
<li>
|
|
DAC: owner and group separated by colon. They can be
|
|
defined both as user/group names or uid/gid. The driver will first
|
|
try to parse these values as names, but a leading plus sign can
|
|
used to force the driver to parse them as uid or gid.
|
|
</li>
|
|
</ul>
|
|
</dd>
|
|
<dt><code>baselabel</code></dt>
|
|
<dd>If dynamic labelling is used, this can optionally be
|
|
used to specify the base security label that will be used to generate
|
|
the actual label. The format of the content depends on the security
|
|
driver in use.
|
|
|
|
The SELinux driver uses only the <code>type</code> field of the
|
|
baselabel in the generated label. Other fields are inherited from
|
|
the parent process when using SELinux baselabels.
|
|
|
|
(The example above demonstrates the use of <code>my_svirt_t</code>
|
|
as the value for the <code>type</code> field.)
|
|
</dd>
|
|
<dt><code>imagelabel</code></dt>
|
|
<dd>This is an output only element, which shows the
|
|
security label used on resources associated with the virtual domain.
|
|
The format of the content depends on the security driver in use
|
|
</dd>
|
|
</dl>
|
|
|
|
<p>When relabeling is in effect, it is also possible to fine-tune
|
|
the labeling done for specific source file names, by either
|
|
disabling the labeling (useful if the file lives on NFS or other
|
|
file system that lacks security labeling) or requesting an
|
|
alternate label (useful when a management application creates a
|
|
special label to allow sharing of some, but not all, resources
|
|
between domains), <span class="since">since 0.9.9</span>. When
|
|
a <code>seclabel</code> element is attached to a specific path
|
|
rather than the top-level domain assignment, only the
|
|
attribute <code>relabel</code> or the
|
|
sub-element <code>label</code> are supported. Additionally,
|
|
<span class="since">since 1.1.2</span>, an output-only
|
|
element <code>labelskip</code> will be present for active
|
|
domains on disks where labeling was skipped due to the image
|
|
being on a file system that lacks security labeling.
|
|
</p>
|
|
|
|
<h3><a id="keywrap">Key Wrap</a></h3>
|
|
|
|
<p>The content of the optional <code>keywrap</code> element specifies
|
|
whether the guest will be allowed to perform the S390 cryptographic key
|
|
management operations. A clear key can be protected by encrypting it
|
|
under a unique wrapping key that is generated for each guest VM running
|
|
on the host. Two variations of wrapping keys are generated: one version
|
|
for encrypting protected keys using the DEA/TDEA algorithm, and another
|
|
version for keys encrypted using the AES algorithm. If a
|
|
<code>keywrap</code> element is not included, the guest will be granted
|
|
access to both AES and DEA/TDEA key wrapping by default.</p>
|
|
|
|
<pre>
|
|
<domain>
|
|
...
|
|
<keywrap>
|
|
<cipher name='aes' state='off'/>
|
|
</keywrap>
|
|
...
|
|
</domain>
|
|
</pre>
|
|
<p>
|
|
At least one <code>cipher</code> element must be nested within the
|
|
<code>keywrap</code> element.
|
|
</p>
|
|
<dl>
|
|
<dt><code>cipher</code></dt>
|
|
<dd>The <code>name</code> attribute identifies the algorithm
|
|
for encrypting a protected key. The values supported for this attribute
|
|
are <code>aes</code> for encryption under the AES wrapping key, or
|
|
<code>dea</code> for encryption under the DEA/TDEA wrapping key. The
|
|
<code>state</code> attribute indicates whether the cryptographic key
|
|
management operations should be turned on for the specified encryption
|
|
algorithm. The value can be set to <code>on</code> or <code>off</code>.
|
|
</dd>
|
|
</dl>
|
|
|
|
<p>Note: DEA/TDEA is synonymous with DES/TDES.</p>
|
|
|
|
<h3><a id="launchSecurity">Launch Security</a></h3>
|
|
|
|
<p>
|
|
The contents of the <code><launchSecurity type='sev'></code> element
|
|
is used to provide the guest owners input used for creating an encrypted
|
|
VM using the AMD SEV feature (Secure Encrypted Virtualization).
|
|
|
|
SEV is an extension to the AMD-V architecture which supports running
|
|
encrypted virtual machine (VMs) under the control of KVM. Encrypted
|
|
VMs have their pages (code and data) secured such that only the guest
|
|
itself has access to the unencrypted version. Each encrypted VM is
|
|
associated with a unique encryption key; if its data is accessed to a
|
|
different entity using a different key the encrypted guests data will
|
|
be incorrectly decrypted, leading to unintelligible data.
|
|
|
|
For more information see various input parameters and its format see the
|
|
<a href="https://support.amd.com/TechDocs/55766_SEV-KM_API_Specification.pdf">SEV API spec</a>
|
|
<span class="since">Since 4.4.0</span>
|
|
</p>
|
|
<pre>
|
|
<domain>
|
|
...
|
|
<launchSecurity type='sev'>
|
|
<policy>0x0001</policy>
|
|
<cbitpos>47</cbitpos>
|
|
<reducedPhysBits>1</reducedPhysBits>
|
|
<dhCert>RBBBSDDD=FDDCCCDDDG</dhCert>
|
|
<session>AAACCCDD=FFFCCCDSDS</session>
|
|
</launchSecurity>
|
|
...
|
|
</domain>
|
|
</pre>
|
|
|
|
<dl>
|
|
<dt><code>cbitpos</code></dt>
|
|
<dd>The required <code>cbitpos</code> element provides the C-bit (aka encryption bit)
|
|
location in guest page table entry. The value of <code>cbitpos</code> is
|
|
hypervisor dependent and can be obtained through the <code>sev</code> element
|
|
from the domain capabilities.
|
|
</dd>
|
|
<dt><code>reducedPhysBits</code></dt>
|
|
<dd>The required <code>reducedPhysBits</code> element provides the physical
|
|
address bit reducation. Similar to <code>cbitpos</code> the value of <code>
|
|
reduced-phys-bit</code> is hypervisor dependent and can be obtained
|
|
through the <code>sev</code> element from the domain capabilities.
|
|
</dd>
|
|
<dt><code>policy</code></dt>
|
|
<dd>The required <code>policy</code> element provides the guest policy
|
|
which must be maintained by the SEV firmware. This policy is enforced by
|
|
the firmware and restricts what configuration and operational commands
|
|
can be performed on this guest by the hypervisor. The guest policy
|
|
provided during guest launch is bound to the guest and cannot be changed
|
|
throughout the lifetime of the guest. The policy is also transmitted
|
|
during snapshot and migration flows and enforced on the destination platform.
|
|
|
|
The guest policy is a 4 unsigned byte with the fields shown in Table:
|
|
|
|
<table class="top_table">
|
|
<tr>
|
|
<th> Bit(s) </th>
|
|
<th> Description </th>
|
|
</tr>
|
|
<tr>
|
|
<td> 0 </td>
|
|
<td> Debugging of the guest is disallowed when set </td>
|
|
</tr>
|
|
<tr>
|
|
<td> 1 </td>
|
|
<td> Sharing keys with other guests is disallowed when set </td>
|
|
</tr>
|
|
<tr>
|
|
<td> 2 </td>
|
|
<td> SEV-ES is required when set</td>
|
|
</tr>
|
|
<tr>
|
|
<td> 3 </td>
|
|
<td> Sending the guest to another platform is disallowed when set</td>
|
|
</tr>
|
|
<tr>
|
|
<td> 4 </td>
|
|
<td> The guest must not be transmitted to another platform that is
|
|
not in the domain when set. </td>
|
|
</tr>
|
|
<tr>
|
|
<td> 5 </td>
|
|
<td> The guest must not be transmitted to another platform that is
|
|
not SEV capable when set. </td>
|
|
</tr>
|
|
<tr>
|
|
<td> 6:15 </td>
|
|
<td> reserved </td>
|
|
</tr>
|
|
<tr>
|
|
<td> 16:32 </td>
|
|
<td> The guest must not be transmitted to another platform with a
|
|
lower firmware version. </td>
|
|
</tr>
|
|
</table>
|
|
|
|
</dd>
|
|
<dt><code>dhCert</code></dt>
|
|
<dd>The optional <code>dhCert</code> element provides the guest owners
|
|
base64 encoded Diffie-Hellman (DH) key. The key is used to negotiate a
|
|
master secret key between the SEV firmware and guest owner. This master
|
|
secret key is then used to establish a trusted channel between SEV
|
|
firmware and guest owner.
|
|
</dd>
|
|
<dt><code>session</code></dt>
|
|
<dd>The optional <code>session</code> element provides the guest owners
|
|
base64 encoded session blob defined in the SEV API spec.
|
|
|
|
See SEV spec LAUNCH_START section for the session blob format.
|
|
</dd>
|
|
</dl>
|
|
|
|
<h2><a id="examples">Example configs</a></h2>
|
|
|
|
<p>
|
|
Example configurations for each driver are provide on the
|
|
driver specific pages listed below
|
|
</p>
|
|
|
|
<ul>
|
|
<li><a href="drvxen.html#xmlconfig">Xen examples</a></li>
|
|
<li><a href="drvqemu.html#xmlconfig">QEMU/KVM examples</a></li>
|
|
</ul>
|
|
</body>
|
|
</html>
|