mirror of
https://gitlab.com/libvirt/libvirt.git
synced 2025-01-23 04:55:18 +00:00
252958ee16
Prepare for new backup APIs by describing the XML that will represent a backup. The XML resembles snapshots and checkpoints in being able to select actions for a set of disks, but has other differences. It can support both push model (the hypervisor does the backup directly into the destination file) and pull model (the hypervisor exposes an access port for a third party to grab what is necessary). Add testsuite coverage for some minimal uses of the XML. The <disk> element within <domainbackup> tries to model the same elements as a <disk> under <domain>, but sharing the RNG grammar proved to be hairy. That is in part because while <domain> use <source> to describe a host resource in use by the guest, a backup job is using a host resource that is not visible to the guest: a push backup action is instead describing a <target> (which ultimately could be a remote network resource, but for simplicity the RNG just validates a local file for now), and a pull backup action is instead describing a temporary local file <scratch> (which probably should not be a remote resource). A future refactoring may thus introduce some way to parameterize RNG to accept <disk type='FOO'>...</disk> so that the name of the subelement can be <source> for domain, or <target> or <scratch> as needed for backups. Future patches may improve this area of code. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
397 lines
12 KiB
RPMSpec
397 lines
12 KiB
RPMSpec
%{?mingw_package_header}
|
|
|
|
# This spec file assumes you are building on a Fedora version
|
|
# that's still supported by the vendor. It may work on other distros
|
|
# or versions, but no effort will be made to ensure that going forward.
|
|
%define min_fedora 29
|
|
|
|
%if 0%{?fedora} && 0%{?fedora} >= %{min_fedora}
|
|
%define supported_platform 1
|
|
%else
|
|
%define supported_platform 0
|
|
%endif
|
|
|
|
# Default to skipping autoreconf. Distros can change just this one line
|
|
# (or provide a command-line override) if they backport any patches that
|
|
# touch configure.ac or Makefile.am.
|
|
%{!?enable_autotools:%define enable_autotools 0}
|
|
|
|
# The mingw build is client only. Set up defaults for hypervisor drivers
|
|
# that talk via a native remote protocol, and for which prereq mingw
|
|
# libraries exist.
|
|
%define with_phyp 0%{!?_without_phyp:1}
|
|
%define with_esx 0%{!?_without_esx:1}
|
|
# missing libwsman, so can't build hyper-v
|
|
%define with_hyperv 0%{!?_without_hyperv:0}
|
|
%define with_xenapi 0%{!?_without_xenapi:1}
|
|
%define with_vz 0%{!?_without_vz:0}
|
|
|
|
# RHEL ships ESX but not PowerHypervisor, HyperV, or libxenserver (xenapi)
|
|
%if 0%{?rhel}
|
|
%define with_phyp 0
|
|
%define with_xenapi 0
|
|
%define with_hyperv 0
|
|
%endif
|
|
|
|
Name: mingw-libvirt
|
|
Version: @VERSION@
|
|
Release: 1%{?dist}
|
|
Summary: MinGW Windows libvirt virtualization library
|
|
|
|
License: LGPLv2+
|
|
URL: https://libvirt.org/
|
|
|
|
%if %(echo %{version} | grep -q "\.0$"; echo $?) == 1
|
|
%define mainturl stable_updates/
|
|
%endif
|
|
Source: https://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz
|
|
|
|
BuildRequires: mingw32-filesystem >= 95
|
|
BuildRequires: mingw64-filesystem >= 95
|
|
BuildRequires: mingw32-gcc
|
|
BuildRequires: mingw64-gcc
|
|
BuildRequires: mingw32-binutils
|
|
BuildRequires: mingw64-binutils
|
|
BuildRequires: mingw32-glib2 >= 2.48
|
|
BuildRequires: mingw64-glib2 >= 2.48
|
|
BuildRequires: mingw32-libgpg-error
|
|
BuildRequires: mingw64-libgpg-error
|
|
BuildRequires: mingw32-libgcrypt
|
|
BuildRequires: mingw64-libgcrypt
|
|
BuildRequires: mingw32-gnutls
|
|
BuildRequires: mingw64-gnutls
|
|
BuildRequires: mingw32-gettext
|
|
BuildRequires: mingw64-gettext
|
|
BuildRequires: mingw32-libxml2
|
|
BuildRequires: mingw64-libxml2
|
|
BuildRequires: mingw32-portablexdr
|
|
BuildRequires: mingw64-portablexdr
|
|
BuildRequires: mingw32-dlfcn
|
|
BuildRequires: mingw64-dlfcn
|
|
|
|
BuildRequires: pkgconfig
|
|
# Need native version for msgfmt
|
|
BuildRequires: gettext
|
|
BuildRequires: libxslt
|
|
BuildRequires: python3
|
|
BuildRequires: perl-interpreter
|
|
BuildRequires: perl(Getopt::Long)
|
|
%if 0%{?enable_autotools}
|
|
BuildRequires: autoconf
|
|
BuildRequires: automake
|
|
BuildRequires: gettext-devel
|
|
BuildRequires: libtool
|
|
%endif
|
|
BuildRequires: python3-docutils
|
|
|
|
BuildRequires: mingw32-libssh2
|
|
BuildRequires: mingw64-libssh2
|
|
%if %{with_esx}
|
|
BuildRequires: mingw32-curl
|
|
BuildRequires: mingw64-curl
|
|
%endif
|
|
BuildRequires: cpp
|
|
%if 0%{?fedora} || 0%{?rhel} > 7
|
|
BuildRequires: rpcgen
|
|
%endif
|
|
|
|
BuildArch: noarch
|
|
|
|
%description
|
|
MinGW Windows libvirt virtualization library.
|
|
|
|
# Mingw32
|
|
%package -n mingw32-libvirt
|
|
Summary: %{summary}
|
|
|
|
%description -n mingw32-libvirt
|
|
MinGW Windows libvirt virtualization library.
|
|
|
|
%package -n mingw32-libvirt-static
|
|
Summary: %{summary}
|
|
Requires: mingw32-libvirt = %{version}-%{release}
|
|
|
|
%description -n mingw32-libvirt-static
|
|
MinGW Windows libvirt virtualization library, static version.
|
|
|
|
# Mingw64
|
|
%package -n mingw64-libvirt
|
|
Summary: %{summary}
|
|
|
|
%description -n mingw64-libvirt
|
|
MinGW Windows libvirt virtualization library.
|
|
|
|
%package -n mingw64-libvirt-static
|
|
Summary: %{summary}
|
|
Requires: mingw64-libvirt = %{version}-%{release}
|
|
|
|
%description -n mingw64-libvirt-static
|
|
MinGW Windows libvirt virtualization library, static version.
|
|
|
|
%{?mingw_debug_package}
|
|
|
|
|
|
%prep
|
|
%setup -q -n libvirt-%{version}
|
|
|
|
%build
|
|
%if ! %{supported_platform}
|
|
echo "This RPM requires Fedora >= %{min_fedora}"
|
|
exit 1
|
|
%endif
|
|
|
|
%if ! %{with_phyp}
|
|
%define _without_phyp --without-phyp
|
|
%endif
|
|
|
|
%if ! %{with_esx}
|
|
%define _without_esx --without-esx
|
|
%endif
|
|
|
|
%if ! %{with_hyperv}
|
|
%define _without_hyperv --without-hyperv
|
|
%endif
|
|
|
|
%if ! %{with_xenapi}
|
|
%define _without_xenapi --without-xenapi
|
|
%endif
|
|
|
|
%if ! %{with_vz}
|
|
%define _without_vz --without-vz
|
|
%endif
|
|
|
|
%if 0%{?enable_autotools}
|
|
autoreconf -if
|
|
%endif
|
|
|
|
# XXX enable SASL in future
|
|
%mingw_configure \
|
|
--enable-static \
|
|
--without-xen \
|
|
--without-qemu \
|
|
--without-openvz \
|
|
--without-lxc \
|
|
--without-vbox \
|
|
%{?_without_xenapi} \
|
|
--without-sasl \
|
|
--without-polkit \
|
|
--without-libvirtd \
|
|
%{?_without_phyp} \
|
|
%{?_without_esx} \
|
|
%{?_without_hyperv} \
|
|
--without-vmware \
|
|
--without-parallels \
|
|
--without-netcf \
|
|
--without-audit \
|
|
--without-dtrace \
|
|
--enable-expensive-tests
|
|
|
|
%mingw_make %{?_smp_mflags}
|
|
|
|
|
|
%install
|
|
%mingw_make_install "DESTDIR=$RPM_BUILD_ROOT"
|
|
|
|
# Libtool files don't need to be bundled
|
|
find $RPM_BUILD_ROOT -name "*.la" -delete
|
|
|
|
rm -rf $RPM_BUILD_ROOT%{mingw32_sysconfdir}/libvirt/nwfilter
|
|
rm -rf $RPM_BUILD_ROOT%{mingw64_sysconfdir}/libvirt/nwfilter
|
|
rm -rf $RPM_BUILD_ROOT%{mingw32_datadir}/doc/*
|
|
rm -rf $RPM_BUILD_ROOT%{mingw64_datadir}/doc/*
|
|
rm -rf $RPM_BUILD_ROOT%{mingw32_datadir}/gtk-doc/*
|
|
rm -rf $RPM_BUILD_ROOT%{mingw64_datadir}/gtk-doc/*
|
|
|
|
rm -rf $RPM_BUILD_ROOT%{mingw32_libexecdir}/libvirt_iohelper.exe
|
|
rm -rf $RPM_BUILD_ROOT%{mingw64_libexecdir}/libvirt_iohelper.exe
|
|
rm -rf $RPM_BUILD_ROOT%{mingw32_libexecdir}/libvirt-guests.sh
|
|
rm -rf $RPM_BUILD_ROOT%{mingw64_libexecdir}/libvirt-guests.sh
|
|
|
|
|
|
# Mingw32
|
|
%files -n mingw32-libvirt
|
|
%dir %{mingw32_sysconfdir}/libvirt/
|
|
%config(noreplace) %{mingw32_sysconfdir}/libvirt/libvirt.conf
|
|
%config(noreplace) %{mingw32_sysconfdir}/libvirt/libvirt-admin.conf
|
|
|
|
%{mingw32_bindir}/libvirt-0.dll
|
|
%{mingw32_bindir}/virsh.exe
|
|
%{mingw32_bindir}/virt-admin.exe
|
|
%{mingw32_bindir}/virt-xml-validate
|
|
%{mingw32_bindir}/virt-pki-validate
|
|
%{mingw32_bindir}/libvirt-lxc-0.dll
|
|
%{mingw32_bindir}/libvirt-qemu-0.dll
|
|
%{mingw32_bindir}/libvirt-admin-0.dll
|
|
|
|
%{mingw32_libdir}/libvirt.dll.a
|
|
%{mingw32_libdir}/pkgconfig/libvirt.pc
|
|
%{mingw32_libdir}/pkgconfig/libvirt-qemu.pc
|
|
%{mingw32_libdir}/pkgconfig/libvirt-lxc.pc
|
|
%{mingw32_libdir}/pkgconfig/libvirt-admin.pc
|
|
%{mingw32_libdir}/libvirt-lxc.dll.a
|
|
%{mingw32_libdir}/libvirt-qemu.dll.a
|
|
%{mingw32_libdir}/libvirt-admin.dll.a
|
|
|
|
%dir %{mingw32_datadir}/libvirt/
|
|
%dir %{mingw32_datadir}/libvirt/schemas/
|
|
%{mingw32_datadir}/libvirt/schemas/basictypes.rng
|
|
%{mingw32_datadir}/libvirt/schemas/capability.rng
|
|
%{mingw32_datadir}/libvirt/schemas/cputypes.rng
|
|
%{mingw32_datadir}/libvirt/schemas/domain.rng
|
|
%{mingw32_datadir}/libvirt/schemas/domainbackup.rng
|
|
%{mingw32_datadir}/libvirt/schemas/domaincaps.rng
|
|
%{mingw32_datadir}/libvirt/schemas/domaincheckpoint.rng
|
|
%{mingw32_datadir}/libvirt/schemas/domaincommon.rng
|
|
%{mingw32_datadir}/libvirt/schemas/domainsnapshot.rng
|
|
%{mingw32_datadir}/libvirt/schemas/interface.rng
|
|
%{mingw32_datadir}/libvirt/schemas/network.rng
|
|
%{mingw32_datadir}/libvirt/schemas/networkcommon.rng
|
|
%{mingw32_datadir}/libvirt/schemas/networkport.rng
|
|
%{mingw32_datadir}/libvirt/schemas/nodedev.rng
|
|
%{mingw32_datadir}/libvirt/schemas/nwfilter.rng
|
|
%{mingw32_datadir}/libvirt/schemas/nwfilter_params.rng
|
|
%{mingw32_datadir}/libvirt/schemas/nwfilterbinding.rng
|
|
%{mingw32_datadir}/libvirt/schemas/secret.rng
|
|
%{mingw32_datadir}/libvirt/schemas/storagecommon.rng
|
|
%{mingw32_datadir}/libvirt/schemas/storagepool.rng
|
|
%{mingw32_datadir}/libvirt/schemas/storagepoolcaps.rng
|
|
%{mingw32_datadir}/libvirt/schemas/storagevol.rng
|
|
%dir %{mingw32_datadir}/libvirt/api/
|
|
%{mingw32_datadir}/libvirt/api/libvirt-api.xml
|
|
%{mingw32_datadir}/libvirt/api/libvirt-lxc-api.xml
|
|
%{mingw32_datadir}/libvirt/api/libvirt-qemu-api.xml
|
|
%{mingw32_datadir}/libvirt/api/libvirt-admin-api.xml
|
|
|
|
%{mingw32_datadir}/libvirt/cpu_map/*.xml
|
|
|
|
%{mingw32_datadir}/libvirt/test-screenshot.png
|
|
|
|
%{mingw32_datadir}/locale/*/LC_MESSAGES/libvirt.mo
|
|
|
|
%dir %{mingw32_includedir}/libvirt
|
|
%{mingw32_includedir}/libvirt/libvirt.h
|
|
%{mingw32_includedir}/libvirt/libvirt-common.h
|
|
%{mingw32_includedir}/libvirt/libvirt-domain.h
|
|
%{mingw32_includedir}/libvirt/libvirt-domain-checkpoint.h
|
|
%{mingw32_includedir}/libvirt/libvirt-domain-snapshot.h
|
|
%{mingw32_includedir}/libvirt/libvirt-event.h
|
|
%{mingw32_includedir}/libvirt/libvirt-host.h
|
|
%{mingw32_includedir}/libvirt/libvirt-interface.h
|
|
%{mingw32_includedir}/libvirt/libvirt-network.h
|
|
%{mingw32_includedir}/libvirt/libvirt-nodedev.h
|
|
%{mingw32_includedir}/libvirt/libvirt-nwfilter.h
|
|
%{mingw32_includedir}/libvirt/libvirt-secret.h
|
|
%{mingw32_includedir}/libvirt/libvirt-storage.h
|
|
%{mingw32_includedir}/libvirt/libvirt-stream.h
|
|
%{mingw32_includedir}/libvirt/virterror.h
|
|
%{mingw32_includedir}/libvirt/libvirt-lxc.h
|
|
%{mingw32_includedir}/libvirt/libvirt-qemu.h
|
|
%{mingw32_includedir}/libvirt/libvirt-admin.h
|
|
|
|
%{mingw32_mandir}/man1/virsh.1*
|
|
%{mingw32_mandir}/man1/virt-admin.1*
|
|
%{mingw32_mandir}/man1/virt-xml-validate.1*
|
|
%{mingw32_mandir}/man1/virt-pki-validate.1*
|
|
%{mingw32_mandir}/man7/virkey*.7*
|
|
|
|
%files -n mingw32-libvirt-static
|
|
%{mingw32_libdir}/libvirt.a
|
|
%{mingw32_libdir}/libvirt-lxc.a
|
|
%{mingw32_libdir}/libvirt-qemu.a
|
|
%{mingw32_libdir}/libvirt-admin.a
|
|
|
|
# Mingw64
|
|
%files -n mingw64-libvirt
|
|
%dir %{mingw64_sysconfdir}/libvirt/
|
|
%config(noreplace) %{mingw64_sysconfdir}/libvirt/libvirt.conf
|
|
%config(noreplace) %{mingw64_sysconfdir}/libvirt/libvirt-admin.conf
|
|
|
|
%{mingw64_bindir}/libvirt-0.dll
|
|
%{mingw64_bindir}/virsh.exe
|
|
%{mingw64_bindir}/virt-admin.exe
|
|
%{mingw64_bindir}/virt-xml-validate
|
|
%{mingw64_bindir}/virt-pki-validate
|
|
%{mingw64_bindir}/libvirt-lxc-0.dll
|
|
%{mingw64_bindir}/libvirt-qemu-0.dll
|
|
%{mingw64_bindir}/libvirt-admin-0.dll
|
|
|
|
%{mingw64_libdir}/libvirt.dll.a
|
|
%{mingw64_libdir}/pkgconfig/libvirt.pc
|
|
%{mingw64_libdir}/pkgconfig/libvirt-qemu.pc
|
|
%{mingw64_libdir}/pkgconfig/libvirt-lxc.pc
|
|
%{mingw64_libdir}/pkgconfig/libvirt-admin.pc
|
|
%{mingw64_libdir}/libvirt-lxc.dll.a
|
|
%{mingw64_libdir}/libvirt-qemu.dll.a
|
|
%{mingw64_libdir}/libvirt-admin.dll.a
|
|
|
|
%dir %{mingw64_datadir}/libvirt/
|
|
%dir %{mingw64_datadir}/libvirt/schemas/
|
|
%{mingw64_datadir}/libvirt/schemas/basictypes.rng
|
|
%{mingw64_datadir}/libvirt/schemas/capability.rng
|
|
%{mingw64_datadir}/libvirt/schemas/cputypes.rng
|
|
%{mingw64_datadir}/libvirt/schemas/domain.rng
|
|
%{mingw64_datadir}/libvirt/schemas/domainbackup.rng
|
|
%{mingw64_datadir}/libvirt/schemas/domaincaps.rng
|
|
%{mingw64_datadir}/libvirt/schemas/domaincheckpoint.rng
|
|
%{mingw64_datadir}/libvirt/schemas/domaincommon.rng
|
|
%{mingw64_datadir}/libvirt/schemas/domainsnapshot.rng
|
|
%{mingw64_datadir}/libvirt/schemas/interface.rng
|
|
%{mingw64_datadir}/libvirt/schemas/network.rng
|
|
%{mingw64_datadir}/libvirt/schemas/networkcommon.rng
|
|
%{mingw64_datadir}/libvirt/schemas/networkport.rng
|
|
%{mingw64_datadir}/libvirt/schemas/nodedev.rng
|
|
%{mingw64_datadir}/libvirt/schemas/nwfilter.rng
|
|
%{mingw64_datadir}/libvirt/schemas/nwfilter_params.rng
|
|
%{mingw64_datadir}/libvirt/schemas/nwfilterbinding.rng
|
|
%{mingw64_datadir}/libvirt/schemas/secret.rng
|
|
%{mingw64_datadir}/libvirt/schemas/storagecommon.rng
|
|
%{mingw64_datadir}/libvirt/schemas/storagepool.rng
|
|
%{mingw64_datadir}/libvirt/schemas/storagepoolcaps.rng
|
|
%{mingw64_datadir}/libvirt/schemas/storagevol.rng
|
|
%dir %{mingw64_datadir}/libvirt/api/
|
|
%{mingw64_datadir}/libvirt/api/libvirt-api.xml
|
|
%{mingw64_datadir}/libvirt/api/libvirt-lxc-api.xml
|
|
%{mingw64_datadir}/libvirt/api/libvirt-qemu-api.xml
|
|
%{mingw64_datadir}/libvirt/api/libvirt-admin-api.xml
|
|
|
|
%{mingw64_datadir}/libvirt/cpu_map/*.xml
|
|
|
|
%{mingw64_datadir}/libvirt/test-screenshot.png
|
|
|
|
%{mingw64_datadir}/locale/*/LC_MESSAGES/libvirt.mo
|
|
|
|
%dir %{mingw64_includedir}/libvirt
|
|
%{mingw64_includedir}/libvirt/libvirt.h
|
|
%{mingw64_includedir}/libvirt/libvirt-common.h
|
|
%{mingw64_includedir}/libvirt/libvirt-domain.h
|
|
%{mingw64_includedir}/libvirt/libvirt-domain-checkpoint.h
|
|
%{mingw64_includedir}/libvirt/libvirt-domain-snapshot.h
|
|
%{mingw64_includedir}/libvirt/libvirt-event.h
|
|
%{mingw64_includedir}/libvirt/libvirt-host.h
|
|
%{mingw64_includedir}/libvirt/libvirt-interface.h
|
|
%{mingw64_includedir}/libvirt/libvirt-network.h
|
|
%{mingw64_includedir}/libvirt/libvirt-nodedev.h
|
|
%{mingw64_includedir}/libvirt/libvirt-nwfilter.h
|
|
%{mingw64_includedir}/libvirt/libvirt-secret.h
|
|
%{mingw64_includedir}/libvirt/libvirt-storage.h
|
|
%{mingw64_includedir}/libvirt/libvirt-stream.h
|
|
%{mingw64_includedir}/libvirt/virterror.h
|
|
%{mingw64_includedir}/libvirt/libvirt-lxc.h
|
|
%{mingw64_includedir}/libvirt/libvirt-qemu.h
|
|
%{mingw64_includedir}/libvirt/libvirt-admin.h
|
|
|
|
%{mingw64_mandir}/man1/virsh.1*
|
|
%{mingw64_mandir}/man1/virt-admin.1*
|
|
%{mingw64_mandir}/man1/virt-xml-validate.1*
|
|
%{mingw64_mandir}/man1/virt-pki-validate.1*
|
|
%{mingw64_mandir}/man7/virkey*.7*
|
|
|
|
%files -n mingw64-libvirt-static
|
|
%{mingw64_libdir}/libvirt.a
|
|
%{mingw64_libdir}/libvirt-lxc.a
|
|
%{mingw64_libdir}/libvirt-qemu.a
|
|
%{mingw64_libdir}/libvirt-admin.a
|
|
|
|
|
|
%changelog
|