libvirt/tools/virsh.c
Eric Blake 689beaa47c backup: Implement virsh support for checkpoints
Introduce a bunch of new virsh commands for managing checkpoints in
isolation. More commands are needed for performing incremental
backups, but these commands were easy to implement by modeling heavily
after virsh-snapshot.c. There is no need for checkpoint-revert or
checkpoint-current since those snapshot APIs have no checkpoint
counterpart.  Similarly, it is not necessary to change which
checkpoint is current when redefining from XML, since until we
integrate checkpoints with snapshots, there is only a linear chain
(and you can deduce the current checkpoint by instead using
'checkpoint-list --leaves').  Other aspects of checkpoint-list are
also a bit simpler than the snapshot counterpart, in part because we
don't have to cater to back-compat to older API.

Upcoming patches will test these interfaces once the test driver
supports checkpoints.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 16:48:58 -05:00

955 lines
26 KiB
C

/*
* virsh.c: a shell to exercise the libvirt API
*
* Copyright (C) 2005, 2007-2015 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include <config.h>
#include "virsh.h"
#include <stdarg.h>
#include <unistd.h>
#include <getopt.h>
#include <sys/time.h>
#include <fcntl.h>
#include <time.h>
#include <sys/stat.h>
#include <inttypes.h>
#include <signal.h>
#if WITH_READLINE
# include <readline/readline.h>
# include <readline/history.h>
#endif
#include "internal.h"
#include "virerror.h"
#include "virbuffer.h"
#include "viralloc.h"
#include "virfile.h"
#include "virthread.h"
#include "vircommand.h"
#include "virtypedparam.h"
#include "virstring.h"
#include "virgettext.h"
#include "virsh-checkpoint.h"
#include "virsh-console.h"
#include "virsh-domain.h"
#include "virsh-domain-monitor.h"
#include "virsh-host.h"
#include "virsh-interface.h"
#include "virsh-network.h"
#include "virsh-nodedev.h"
#include "virsh-nwfilter.h"
#include "virsh-pool.h"
#include "virsh-secret.h"
#include "virsh-snapshot.h"
#include "virsh-volume.h"
/* Gnulib doesn't guarantee SA_SIGINFO support. */
#ifndef SA_SIGINFO
# define SA_SIGINFO 0
#endif
static char *progname;
static const vshCmdGrp cmdGroups[];
static const vshClientHooks hooks;
/*
* Detection of disconnections and automatic reconnection support
*/
static int disconnected; /* we may have been disconnected */
/*
* virshCatchDisconnect:
*
* We get here when the connection was closed. We can't do much in the
* handler, just save the fact it was raised.
*/
static void
virshCatchDisconnect(virConnectPtr conn,
int reason,
void *opaque)
{
if (reason != VIR_CONNECT_CLOSE_REASON_CLIENT) {
vshControl *ctl = opaque;
const char *str = "unknown reason";
virErrorPtr error;
char *uri;
error = virSaveLastError();
uri = virConnectGetURI(conn);
switch ((virConnectCloseReason) reason) {
case VIR_CONNECT_CLOSE_REASON_ERROR:
str = N_("Disconnected from %s due to I/O error");
break;
case VIR_CONNECT_CLOSE_REASON_EOF:
str = N_("Disconnected from %s due to end of file");
break;
case VIR_CONNECT_CLOSE_REASON_KEEPALIVE:
str = N_("Disconnected from %s due to keepalive timeout");
break;
/* coverity[dead_error_condition] */
case VIR_CONNECT_CLOSE_REASON_CLIENT:
case VIR_CONNECT_CLOSE_REASON_LAST:
break;
}
vshError(ctl, _(str), NULLSTR(uri));
VIR_FREE(uri);
if (error) {
virSetError(error);
virFreeError(error);
}
disconnected++;
vshEventDone(ctl);
}
}
/* Main Function which should be used for connecting.
* This function properly handles keepalive settings. */
virConnectPtr
virshConnect(vshControl *ctl, const char *uri, bool readonly)
{
virConnectPtr c = NULL;
int interval = 5; /* Default */
int count = 6; /* Default */
bool keepalive_forced = false;
virPolkitAgentPtr pkagent = NULL;
int authfail = 0;
bool agentCreated = false;
if (ctl->keepalive_interval >= 0) {
interval = ctl->keepalive_interval;
keepalive_forced = true;
}
if (ctl->keepalive_count >= 0) {
count = ctl->keepalive_count;
keepalive_forced = true;
}
do {
virErrorPtr err;
if ((c = virConnectOpenAuth(uri, virConnectAuthPtrDefault,
readonly ? VIR_CONNECT_RO : 0)))
break;
if (readonly)
goto cleanup;
err = virGetLastError();
if (!agentCreated &&
err && err->domain == VIR_FROM_POLKIT &&
err->code == VIR_ERR_AUTH_UNAVAILABLE) {
if (!pkagent && !(pkagent = virPolkitAgentCreate()))
goto cleanup;
agentCreated = true;
} else if (err && err->domain == VIR_FROM_POLKIT &&
err->code == VIR_ERR_AUTH_FAILED) {
authfail++;
} else {
goto cleanup;
}
virResetLastError();
/* Failure to authenticate 5 times should be enough.
* No sense prolonging the agony.
*/
} while (authfail < 5);
if (!c)
goto cleanup;
if (interval > 0 &&
virConnectSetKeepAlive(c, interval, count) != 0) {
if (keepalive_forced) {
vshError(ctl, "%s",
_("Cannot setup keepalive on connection "
"as requested, disconnecting"));
virConnectClose(c);
c = NULL;
goto cleanup;
}
vshDebug(ctl, VSH_ERR_INFO, "%s",
_("Failed to setup keepalive on connection\n"));
}
cleanup:
virPolkitAgentDestroy(pkagent);
return c;
}
/*
* virshReconnect:
*
* Reconnect after a disconnect from libvirtd
*
*/
static int
virshReconnect(vshControl *ctl, const char *name, bool readonly, bool force)
{
bool connected = false;
virshControlPtr priv = ctl->privData;
/* If the flag was not specified, then it depends on whether we are
* reconnecting to the current URI (in which case we want to keep the
* readonly flag as it was) or to a specified URI in which case it
* should stay false */
if (!readonly && !name)
readonly = priv->readonly;
if (priv->conn) {
int ret;
connected = true;
virConnectUnregisterCloseCallback(priv->conn, virshCatchDisconnect);
ret = virConnectClose(priv->conn);
if (ret < 0)
vshError(ctl, "%s", _("Failed to disconnect from the hypervisor"));
else if (ret > 0)
vshError(ctl, "%s", _("One or more references were leaked after "
"disconnect from the hypervisor"));
}
priv->conn = virshConnect(ctl, name ? name : ctl->connname, readonly);
if (!priv->conn) {
if (disconnected)
vshError(ctl, "%s", _("Failed to reconnect to the hypervisor"));
else
vshError(ctl, "%s", _("failed to connect to the hypervisor"));
return -1;
} else {
if (name) {
VIR_FREE(ctl->connname);
ctl->connname = vshStrdup(ctl, name);
}
priv->readonly = readonly;
if (virConnectRegisterCloseCallback(priv->conn, virshCatchDisconnect,
ctl, NULL) < 0)
vshError(ctl, "%s", _("Unable to register disconnect callback"));
if (connected && !force)
vshError(ctl, "%s", _("Reconnected to the hypervisor"));
}
disconnected = 0;
priv->useGetInfo = false;
priv->useSnapshotOld = false;
priv->blockJobNoBytes = false;
return 0;
}
/* ---------------
* Command Connect
* ---------------
*/
static const vshCmdOptDef opts_connect[] = {
{.name = "name",
.type = VSH_OT_STRING,
.flags = VSH_OFLAG_EMPTY_OK,
.help = N_("hypervisor connection URI")
},
{.name = "readonly",
.type = VSH_OT_BOOL,
.help = N_("read-only connection")
},
{.name = NULL}
};
static const vshCmdInfo info_connect[] = {
{.name = "help",
.data = N_("(re)connect to hypervisor")
},
{.name = "desc",
.data = N_("Connect to local hypervisor. This is built-in "
"command after shell start up.")
},
{.name = NULL}
};
static bool
cmdConnect(vshControl *ctl, const vshCmd *cmd)
{
bool ro = vshCommandOptBool(cmd, "readonly");
const char *name = NULL;
if (vshCommandOptStringReq(ctl, cmd, "name", &name) < 0)
return false;
if (virshReconnect(ctl, name, ro, true) < 0)
return false;
return true;
}
/* ---------------
* Utils for work with runtime commands data
* ---------------
*/
static bool
virshConnectionUsability(vshControl *ctl, virConnectPtr conn)
{
if (!conn ||
virConnectIsAlive(conn) == 0) {
vshError(ctl, "%s", _("no valid connection"));
return false;
}
/* The connection is considered dead only if
* virConnectIsAlive() successfully says so.
*/
vshResetLibvirtError();
return true;
}
static void *
virshConnectionHandler(vshControl *ctl)
{
virshControlPtr priv = ctl->privData;
if ((!priv->conn || disconnected) &&
virshReconnect(ctl, NULL, false, false) < 0)
return NULL;
if (virshConnectionUsability(ctl, priv->conn))
return priv->conn;
return NULL;
}
/*
* Initialize connection.
*/
static bool
virshInit(vshControl *ctl)
{
virshControlPtr priv = ctl->privData;
/* Since we have the commandline arguments parsed, we need to
* reload our initial settings to make debugging and readline
* work properly */
vshInitReload(ctl);
if (priv->conn)
return false;
/* set up the library error handler */
virSetErrorFunc(NULL, vshErrorHandler);
if (virEventRegisterDefaultImpl() < 0) {
vshReportError(ctl);
return false;
}
if (virThreadCreate(&ctl->eventLoop, true, vshEventLoop, ctl) < 0) {
vshReportError(ctl);
return false;
}
ctl->eventLoopStarted = true;
if ((ctl->eventTimerId = virEventAddTimeout(-1, vshEventTimeout, ctl,
NULL)) < 0) {
vshReportError(ctl);
return false;
}
if (ctl->connname) {
/* Connecting to a named connection must succeed, but we delay
* connecting to the default connection until we need it
* (since the first command might be 'connect' which allows a
* non-default connection, or might be 'help' which needs no
* connection).
*/
if (virshReconnect(ctl, NULL, false, false) < 0) {
vshReportError(ctl);
return false;
}
}
return true;
}
static void
virshDeinitTimer(int timer ATTRIBUTE_UNUSED, void *opaque ATTRIBUTE_UNUSED)
{
/* nothing to be done here */
}
/*
* Deinitialize virsh
*/
static bool
virshDeinit(vshControl *ctl)
{
virshControlPtr priv = ctl->privData;
vshDeinit(ctl);
VIR_FREE(ctl->connname);
if (priv->conn) {
int ret;
virConnectUnregisterCloseCallback(priv->conn, virshCatchDisconnect);
ret = virConnectClose(priv->conn);
if (ret < 0)
vshError(ctl, "%s", _("Failed to disconnect from the hypervisor"));
else if (ret > 0)
vshError(ctl, "%s", _("One or more references were leaked after "
"disconnect from the hypervisor"));
}
virResetLastError();
if (ctl->eventLoopStarted) {
int timer;
virMutexLock(&ctl->lock);
ctl->quit = true;
/* HACK: Add a dummy timeout to break event loop */
timer = virEventAddTimeout(0, virshDeinitTimer, NULL, NULL);
virMutexUnlock(&ctl->lock);
virThreadJoin(&ctl->eventLoop);
if (timer != -1)
virEventRemoveTimeout(timer);
if (ctl->eventTimerId != -1)
virEventRemoveTimeout(ctl->eventTimerId);
ctl->eventLoopStarted = false;
}
virMutexDestroy(&ctl->lock);
return true;
}
/*
* Print usage
*/
static void
virshUsage(void)
{
const vshCmdGrp *grp;
const vshCmdDef *cmd;
fprintf(stdout, _("\n%s [options]... [<command_string>]"
"\n%s [options]... <command> [args...]\n\n"
" options:\n"
" -c | --connect=URI hypervisor connection URI\n"
" -d | --debug=NUM debug level [0-4]\n"
" -e | --escape <char> set escape sequence for console\n"
" -h | --help this help\n"
" -k | --keepalive-interval=NUM\n"
" keepalive interval in seconds, 0 for disable\n"
" -K | --keepalive-count=NUM\n"
" number of possible missed keepalive messages\n"
" -l | --log=FILE output logging to file\n"
" -q | --quiet quiet mode\n"
" -r | --readonly connect readonly\n"
" -t | --timing print timing information\n"
" -v short version\n"
" -V long version\n"
" --version[=TYPE] version, TYPE is short or long (default short)\n"
" commands (non interactive mode):\n\n"), progname,
progname);
for (grp = cmdGroups; grp->name; grp++) {
fprintf(stdout, _(" %s (help keyword '%s')\n"),
grp->name, grp->keyword);
for (cmd = grp->commands; cmd->name; cmd++) {
if (cmd->flags & VSH_CMD_FLAG_ALIAS)
continue;
fprintf(stdout,
" %-30s %s\n", cmd->name,
_(vshCmddefGetInfo(cmd, "help")));
}
fprintf(stdout, "\n");
}
fprintf(stdout, "%s",
_("\n (specify help <group> for details about the commands in the group)\n"));
fprintf(stdout, "%s",
_("\n (specify help <command> for details about the command)\n\n"));
return;
}
/*
* Show version and options compiled in
*/
static void
virshShowVersion(vshControl *ctl ATTRIBUTE_UNUSED)
{
/* FIXME - list a copyright blurb, as in GNU programs? */
vshPrint(ctl, _("Virsh command line tool of libvirt %s\n"), VERSION);
vshPrint(ctl, _("See web site at %s\n\n"), "https://libvirt.org/");
vshPrint(ctl, "%s", _("Compiled with support for:\n"));
vshPrint(ctl, "%s", _(" Hypervisors:"));
#ifdef WITH_QEMU
vshPrint(ctl, " QEMU/KVM");
#endif
#ifdef WITH_LXC
vshPrint(ctl, " LXC");
#endif
#ifdef WITH_LIBXL
vshPrint(ctl, " LibXL");
#endif
#ifdef WITH_OPENVZ
vshPrint(ctl, " OpenVZ");
#endif
#ifdef WITH_VZ
vshPrint(ctl, " Virtuozzo");
#endif
#ifdef WITH_VMWARE
vshPrint(ctl, " VMware");
#endif
#ifdef WITH_PHYP
vshPrint(ctl, " PHYP");
#endif
#ifdef WITH_VBOX
vshPrint(ctl, " VirtualBox");
#endif
#ifdef WITH_ESX
vshPrint(ctl, " ESX");
#endif
#ifdef WITH_HYPERV
vshPrint(ctl, " Hyper-V");
#endif
#ifdef WITH_XENAPI
vshPrint(ctl, " XenAPI");
#endif
#ifdef WITH_BHYVE
vshPrint(ctl, " Bhyve");
#endif
#ifdef WITH_TEST
vshPrint(ctl, " Test");
#endif
vshPrint(ctl, "\n");
vshPrint(ctl, "%s", _(" Networking:"));
#ifdef WITH_REMOTE
vshPrint(ctl, " Remote");
#endif
#ifdef WITH_NETWORK
vshPrint(ctl, " Network");
#endif
#ifdef WITH_BRIDGE
vshPrint(ctl, " Bridging");
#endif
#if defined(WITH_INTERFACE)
vshPrint(ctl, " Interface");
# if defined(WITH_NETCF)
vshPrint(ctl, " netcf");
# elif defined(WITH_UDEV)
vshPrint(ctl, " udev");
# endif
#endif
#ifdef WITH_NWFILTER
vshPrint(ctl, " Nwfilter");
#endif
#ifdef WITH_VIRTUALPORT
vshPrint(ctl, " VirtualPort");
#endif
vshPrint(ctl, "\n");
vshPrint(ctl, "%s", _(" Storage:"));
#ifdef WITH_STORAGE_DIR
vshPrint(ctl, " Dir");
#endif
#ifdef WITH_STORAGE_DISK
vshPrint(ctl, " Disk");
#endif
#ifdef WITH_STORAGE_FS
vshPrint(ctl, " Filesystem");
#endif
#ifdef WITH_STORAGE_SCSI
vshPrint(ctl, " SCSI");
#endif
#ifdef WITH_STORAGE_MPATH
vshPrint(ctl, " Multipath");
#endif
#ifdef WITH_STORAGE_ISCSI
vshPrint(ctl, " iSCSI");
#endif
#ifdef WITH_STORAGE_LVM
vshPrint(ctl, " LVM");
#endif
#ifdef WITH_STORAGE_RBD
vshPrint(ctl, " RBD");
#endif
#ifdef WITH_STORAGE_SHEEPDOG
vshPrint(ctl, " Sheepdog");
#endif
#ifdef WITH_STORAGE_GLUSTER
vshPrint(ctl, " Gluster");
#endif
#ifdef WITH_STORAGE_ZFS
vshPrint(ctl, " ZFS");
#endif
#ifdef WITH_STORAGE_VSTORAGE
vshPrint(ctl, "Virtuozzo Storage");
#endif
vshPrint(ctl, "\n");
vshPrint(ctl, "%s", _(" Miscellaneous:"));
#ifdef WITH_LIBVIRTD
vshPrint(ctl, " Daemon");
#endif
#ifdef WITH_NODE_DEVICES
vshPrint(ctl, " Nodedev");
#endif
#ifdef WITH_SECDRIVER_APPARMOR
vshPrint(ctl, " AppArmor");
#endif
#ifdef WITH_SECDRIVER_SELINUX
vshPrint(ctl, " SELinux");
#endif
#ifdef WITH_SECRETS
vshPrint(ctl, " Secrets");
#endif
#ifdef ENABLE_DEBUG
vshPrint(ctl, " Debug");
#endif
#ifdef WITH_DTRACE_PROBES
vshPrint(ctl, " DTrace");
#endif
#if WITH_READLINE
vshPrint(ctl, " Readline");
#endif
vshPrint(ctl, "\n");
}
static bool
virshAllowedEscapeChar(char c)
{
/* Allowed escape characters:
* a-z A-Z @ [ \ ] ^ _
*/
return ('a' <= c && c <= 'z') ||
('@' <= c && c <= '_');
}
/*
* argv[]: virsh [options] [command]
*
*/
static bool
virshParseArgv(vshControl *ctl, int argc, char **argv)
{
int arg, len, debug, keepalive;
size_t i;
int longindex = -1;
virshControlPtr priv = ctl->privData;
struct option opt[] = {
{"connect", required_argument, NULL, 'c'},
{"debug", required_argument, NULL, 'd'},
{"escape", required_argument, NULL, 'e'},
{"help", no_argument, NULL, 'h'},
{"keepalive-interval", required_argument, NULL, 'k'},
{"keepalive-count", required_argument, NULL, 'K'},
{"log", required_argument, NULL, 'l'},
{"quiet", no_argument, NULL, 'q'},
{"readonly", no_argument, NULL, 'r'},
{"timing", no_argument, NULL, 't'},
{"version", optional_argument, NULL, 'v'},
{NULL, 0, NULL, 0}
};
/* Standard (non-command) options. The leading + ensures that no
* argument reordering takes place, so that command options are
* not confused with top-level virsh options. */
while ((arg = getopt_long(argc, argv, "+:c:d:e:hk:K:l:qrtvV", opt, &longindex)) != -1) {
switch (arg) {
case 'c':
VIR_FREE(ctl->connname);
ctl->connname = vshStrdup(ctl, optarg);
break;
case 'd':
if (virStrToLong_i(optarg, NULL, 10, &debug) < 0) {
vshError(ctl, _("option %s takes a numeric argument"),
longindex == -1 ? "-d" : "--debug");
exit(EXIT_FAILURE);
}
if (debug < VSH_ERR_DEBUG || debug > VSH_ERR_ERROR)
vshError(ctl, _("ignoring debug level %d out of range [%d-%d]"),
debug, VSH_ERR_DEBUG, VSH_ERR_ERROR);
else
ctl->debug = debug;
break;
case 'e':
len = strlen(optarg);
if ((len == 2 && *optarg == '^' &&
virshAllowedEscapeChar(optarg[1])) ||
(len == 1 && *optarg != '^')) {
priv->escapeChar = optarg;
} else {
vshError(ctl, _("Invalid string '%s' for escape sequence"),
optarg);
exit(EXIT_FAILURE);
}
break;
case 'h':
virshUsage();
exit(EXIT_SUCCESS);
break;
case 'k':
if (virStrToLong_i(optarg, NULL, 0, &keepalive) < 0) {
vshError(ctl,
_("Invalid value for option %s"),
longindex == -1 ? "-k" : "--keepalive-interval");
exit(EXIT_FAILURE);
}
if (keepalive < 0) {
vshError(ctl,
_("option %s requires a positive integer argument"),
longindex == -1 ? "-k" : "--keepalive-interval");
exit(EXIT_FAILURE);
}
ctl->keepalive_interval = keepalive;
break;
case 'K':
if (virStrToLong_i(optarg, NULL, 0, &keepalive) < 0) {
vshError(ctl,
_("Invalid value for option %s"),
longindex == -1 ? "-K" : "--keepalive-count");
exit(EXIT_FAILURE);
}
if (keepalive < 0) {
vshError(ctl,
_("option %s requires a positive integer argument"),
longindex == -1 ? "-K" : "--keepalive-count");
exit(EXIT_FAILURE);
}
ctl->keepalive_count = keepalive;
break;
case 'l':
vshCloseLogFile(ctl);
ctl->logfile = vshStrdup(ctl, optarg);
vshOpenLogFile(ctl);
break;
case 'q':
ctl->quiet = true;
break;
case 't':
ctl->timing = true;
break;
case 'r':
priv->readonly = true;
break;
case 'v':
if (STRNEQ_NULLABLE(optarg, "long")) {
puts(VERSION);
exit(EXIT_SUCCESS);
}
ATTRIBUTE_FALLTHROUGH;
case 'V':
virshShowVersion(ctl);
exit(EXIT_SUCCESS);
case ':':
for (i = 0; opt[i].name != NULL; i++) {
if (opt[i].val == optopt)
break;
}
if (opt[i].name)
vshError(ctl, _("option '-%c'/'--%s' requires an argument"),
optopt, opt[i].name);
else
vshError(ctl, _("option '-%c' requires an argument"), optopt);
exit(EXIT_FAILURE);
case '?':
if (optopt)
vshError(ctl, _("unsupported option '-%c'. See --help."), optopt);
else
vshError(ctl, _("unsupported option '%s'. See --help."), argv[optind - 1]);
exit(EXIT_FAILURE);
default:
vshError(ctl, _("unknown option"));
exit(EXIT_FAILURE);
}
longindex = -1;
}
if (argc == optind) {
ctl->imode = true;
} else {
/* parse command */
ctl->imode = false;
if (argc - optind == 1) {
vshDebug(ctl, VSH_ERR_INFO, "commands: \"%s\"\n", argv[optind]);
return vshCommandStringParse(ctl, argv[optind], NULL);
} else {
return vshCommandArgvParse(ctl, argc - optind, argv + optind);
}
}
return true;
}
static const vshCmdDef virshCmds[] = {
VSH_CMD_CD,
VSH_CMD_ECHO,
VSH_CMD_EXIT,
VSH_CMD_HELP,
VSH_CMD_PWD,
VSH_CMD_QUIT,
VSH_CMD_SELF_TEST,
VSH_CMD_COMPLETE,
{.name = "connect",
.handler = cmdConnect,
.opts = opts_connect,
.info = info_connect,
.flags = VSH_CMD_FLAG_NOCONNECT
},
{.name = NULL}
};
static const vshCmdGrp cmdGroups[] = {
{VIRSH_CMD_GRP_DOM_MANAGEMENT, "domain", domManagementCmds},
{VIRSH_CMD_GRP_DOM_MONITORING, "monitor", domMonitoringCmds},
{VIRSH_CMD_GRP_HOST_AND_HV, "host", hostAndHypervisorCmds},
{VIRSH_CMD_GRP_CHECKPOINT, "checkpoint", checkpointCmds},
{VIRSH_CMD_GRP_IFACE, "interface", ifaceCmds},
{VIRSH_CMD_GRP_NWFILTER, "filter", nwfilterCmds},
{VIRSH_CMD_GRP_NETWORK, "network", networkCmds},
{VIRSH_CMD_GRP_NODEDEV, "nodedev", nodedevCmds},
{VIRSH_CMD_GRP_SECRET, "secret", secretCmds},
{VIRSH_CMD_GRP_SNAPSHOT, "snapshot", snapshotCmds},
{VIRSH_CMD_GRP_STORAGE_POOL, "pool", storagePoolCmds},
{VIRSH_CMD_GRP_STORAGE_VOL, "volume", storageVolCmds},
{VIRSH_CMD_GRP_VIRSH, "virsh", virshCmds},
{NULL, NULL, NULL}
};
static const vshClientHooks hooks = {
.connHandler = virshConnectionHandler
};
int
main(int argc, char **argv)
{
vshControl _ctl, *ctl = &_ctl;
virshControl virshCtl;
bool ret = true;
memset(ctl, 0, sizeof(vshControl));
memset(&virshCtl, 0, sizeof(virshControl));
ctl->name = "virsh"; /* hardcoded name of the binary */
ctl->env_prefix = "VIRSH";
ctl->log_fd = -1; /* Initialize log file descriptor */
ctl->debug = VSH_DEBUG_DEFAULT;
ctl->hooks = &hooks;
/* In order to distinguish default from setting to 0 */
ctl->keepalive_interval = -1;
ctl->keepalive_count = -1;
ctl->eventPipe[0] = -1;
ctl->eventPipe[1] = -1;
ctl->eventTimerId = -1;
virshCtl.escapeChar = "^]"; /* Same default as telnet */
ctl->privData = &virshCtl;
if (!(progname = strrchr(argv[0], '/')))
progname = argv[0];
else
progname++;
ctl->progname = progname;
if (virGettextInitialize() < 0)
return EXIT_FAILURE;
if (isatty(STDIN_FILENO)) {
ctl->istty = true;
#ifndef WIN32
if (tcgetattr(STDIN_FILENO, &ctl->termattr) < 0)
ctl->istty = false;
#endif
}
if (virMutexInit(&ctl->lock) < 0) {
vshError(ctl, "%s", _("Failed to initialize mutex"));
return EXIT_FAILURE;
}
if (virInitialize() < 0) {
vshError(ctl, "%s", _("Failed to initialize libvirt"));
return EXIT_FAILURE;
}
virFileActivateDirOverride(argv[0]);
if (!vshInit(ctl, cmdGroups, NULL))
exit(EXIT_FAILURE);
if (!virshParseArgv(ctl, argc, argv) ||
!virshInit(ctl)) {
virshDeinit(ctl);
exit(EXIT_FAILURE);
}
if (!ctl->connname)
ctl->connname = vshStrdup(ctl,
virGetEnvBlockSUID("VIRSH_DEFAULT_CONNECT_URI"));
if (!ctl->imode) {
ret = vshCommandRun(ctl, ctl->cmd);
} else {
/* interactive mode */
if (!ctl->quiet) {
vshPrint(ctl,
_("Welcome to %s, the virtualization interactive terminal.\n\n"),
progname);
vshPrint(ctl, "%s",
_("Type: 'help' for help with commands\n"
" 'quit' to quit\n\n"));
}
do {
const char *prompt = virshCtl.readonly ? VIRSH_PROMPT_RO
: VIRSH_PROMPT_RW;
ctl->cmdstr =
vshReadline(ctl, prompt);
if (ctl->cmdstr == NULL)
break; /* EOF */
if (*ctl->cmdstr) {
#if WITH_READLINE
add_history(ctl->cmdstr);
#endif
if (vshCommandStringParse(ctl, ctl->cmdstr, NULL))
vshCommandRun(ctl, ctl->cmd);
}
VIR_FREE(ctl->cmdstr);
} while (ctl->imode);
if (ctl->cmdstr == NULL)
fputc('\n', stdout); /* line break after alone prompt */
}
virshDeinit(ctl);
exit(ret ? EXIT_SUCCESS : EXIT_FAILURE);
}