mirror of
https://gitlab.com/libvirt/libvirt.git
synced 2024-08-27 19:11:16 +00:00
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
773 lines
38 KiB
XML
773 lines
38 KiB
XML
<?xml version="1.0" encoding="UTF-8"?>
|
|
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
|
|
<html xmlns="http://www.w3.org/1999/xhtml">
|
|
<body>
|
|
<h1>Storage pool and volume XML format</h1>
|
|
|
|
<ul id="toc"></ul>
|
|
|
|
<h2><a name="StoragePool">Storage pool XML</a></h2>
|
|
|
|
<p>
|
|
Although all storage pool backends share the same public APIs and
|
|
XML format, they have varying levels of capabilities. Some may
|
|
allow creation of volumes, others may only allow use of pre-existing
|
|
volumes. Some may have constraints on volume size, or placement.
|
|
</p>
|
|
<p>
|
|
The top level tag for a storage pool document is 'pool'. It has
|
|
a single attribute <code>type</code>, which is one of <code>dir</code>,
|
|
<code>fs</code>, <code>netfs</code>, <code>disk</code>,
|
|
<code>iscsi</code>, <code>logical</code>, <code>scsi</code>
|
|
(all <span class="since">since 0.4.1</span>), <code>mpath</code>
|
|
(<span class="since">since 0.7.1</span>), <code>rbd</code>
|
|
(<span class="since">since 0.9.13</span>), <code>sheepdog</code>
|
|
(<span class="since">since 0.10.0</span>),
|
|
<code>gluster</code> (<span class="since">since
|
|
1.2.0</span>) or <code>zfs</code> (<span class="since">since
|
|
1.2.8</span>). This corresponds to the
|
|
storage backend drivers listed further along in this document.
|
|
</p>
|
|
<h3><a name="StoragePoolFirst">General metadata</a></h3>
|
|
|
|
<pre>
|
|
<pool type="iscsi">
|
|
<name>virtimages</name>
|
|
<uuid>3e3fce45-4f53-4fa7-bb32-11f34168b82b</uuid>
|
|
<allocation>10000000</allocation>
|
|
<capacity>50000000</capacity>
|
|
<available>40000000</available>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>name</code></dt>
|
|
<dd>Providing a name for the pool which is unique to the host.
|
|
This is mandatory when defining a pool. <span class="since">Since 0.4.1</span></dd>
|
|
<dt><code>uuid</code></dt>
|
|
<dd>Providing an identifier for the pool which is globally unique.
|
|
This is optional when defining a pool, a UUID will be generated if
|
|
omitted. <span class="since">Since 0.4.1</span></dd>
|
|
<dt><code>allocation</code></dt>
|
|
<dd>Providing the total storage allocation for the pool. This may
|
|
be larger than the sum of the allocation of all volumes due to
|
|
metadata overhead. This value is in bytes. This is not applicable
|
|
when creating a pool. <span class="since">Since 0.4.1</span></dd>
|
|
<dt><code>capacity</code></dt>
|
|
<dd>Providing the total storage capacity for the pool. Due to
|
|
underlying device constraints it may not be possible to use the
|
|
full capacity for storage volumes. This value is in bytes. This
|
|
is not applicable when creating a pool. <span class="since">Since 0.4.1</span></dd>
|
|
<dt><code>available</code></dt>
|
|
<dd>Providing the free space available for allocating new volumes
|
|
in the pool. Due to underlying device constraints it may not be
|
|
possible to allocate the entire free space to a single volume.
|
|
This value is in bytes. This is not applicable when creating a
|
|
pool. <span class="since">Since 0.4.1</span></dd>
|
|
</dl>
|
|
|
|
<h3><a name="StoragePoolSource">Source elements</a></h3>
|
|
|
|
<p>
|
|
A single <code>source</code> element is contained within the top level
|
|
<code>pool</code> element. This tag is used to describe the source of
|
|
the storage pool. The set of child elements that it will contain
|
|
depend on the pool type, but come from the following child elements:
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<source>
|
|
<host name="iscsi.example.com"/>
|
|
<device path="iqn.2013-06.com.example:iscsi-pool"/>
|
|
<auth type='chap' username='myname'>
|
|
<secret usage='mycluster_myname'/>
|
|
</auth>
|
|
<vendor name="Acme"/>
|
|
<product name="model"/>
|
|
</source>
|
|
...</pre>
|
|
|
|
<pre>
|
|
...
|
|
<source>
|
|
<device path='/dev/mapper/mpatha' part_separator='no'/>
|
|
<format type='gpt'/>
|
|
</source>
|
|
...</pre>
|
|
|
|
<pre>
|
|
...
|
|
<source>
|
|
<adapter type='scsi_host' name='scsi_host1'/>
|
|
</source>
|
|
...</pre>
|
|
|
|
<pre>
|
|
...
|
|
<source>
|
|
<adapter type='scsi_host'>
|
|
<parentaddr unique_id='1'>
|
|
<address domain='0x0000' bus='0x00' slot='0x1f' addr='0x2'/>
|
|
</parentaddr>
|
|
</adapter>
|
|
</source>
|
|
...</pre>
|
|
|
|
<pre>
|
|
...
|
|
<source>
|
|
<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>
|
|
</source>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>device</code></dt>
|
|
<dd>Provides the source for pools backed by physical devices
|
|
(pool types <code>fs</code>, <code>logical</code>, <code>disk</code>,
|
|
<code>iscsi</code>, <code>zfs</code>).
|
|
May be repeated multiple times depending on backend driver. Contains
|
|
a required attribute <code>path</code> which is either the fully
|
|
qualified path to the block device node or for <code>iscsi</code>
|
|
the iSCSI Qualified Name (IQN).
|
|
<span class="since">Since 0.4.1</span>
|
|
<p>An optional attribute <code>part_separator</code> for each
|
|
<code>path</code> may be supplied. Valid values for the attribute
|
|
may be either "yes" or "no". This attribute is to be used for a
|
|
<code>disk</code> pool type using a <code>path</code> to a
|
|
device mapper multipath device. Setting the attribute to "yes"
|
|
causes libvirt to attempt to generate and find target volume path's
|
|
using a "p" separator. The default algorithm used by device mapper
|
|
is to add the "p" separator only when the source device path ends
|
|
with a number.
|
|
<span class="since">Since 1.3.1</span></p></dd>
|
|
<dt><code>dir</code></dt>
|
|
<dd>Provides the source for pools backed by directories (pool
|
|
types <code>dir</code>, <code>netfs</code>, <code>gluster</code>),
|
|
or optionally to select a subdirectory
|
|
within a pool that resembles a filesystem (pool
|
|
type <code>gluster</code>). May
|
|
only occur once. Contains a single attribute <code>path</code>
|
|
which is the fully qualified path to the backing directory or
|
|
for a <code>netfs</code> pool type using <code>format</code>
|
|
type "cifs", the path to the Samba share without the leading slash.
|
|
<span class="since">Since 0.4.1</span></dd>
|
|
<dt><code>adapter</code></dt>
|
|
<dd>Provides the source for pools backed by SCSI adapters (pool
|
|
type <code>scsi</code>). May only occur once.
|
|
<dl>
|
|
<dt><code>name</code></dt>
|
|
<dd>The SCSI adapter name (e.g. "scsi_host1", although a name
|
|
such as "host1" is still supported for backwards compatibility,
|
|
it is not recommended). The scsi_host name to be used can be
|
|
determined from the output of a <code>virsh nodedev-list
|
|
scsi_host</code> command followed by a combination of
|
|
<code>lspci</code> and <code>virsh nodedev-dumpxml
|
|
scsi_hostN</code> commands to find the <code>scsi_hostN</code>
|
|
to be used. <span class="since">Since 0.6.2</span>
|
|
<p>
|
|
It is further recommended to utilize the
|
|
<code>parentaddr</code> element since it's possible to have
|
|
the path to which the scsi_hostN uses change between system
|
|
reboots. <span class="since">Since 1.2.7</span>
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
<dl>
|
|
<dt><code>type</code></dt>
|
|
<dd>Specifies the adapter type. Valid values are "scsi_host" or
|
|
"fc_host". If omitted and the <code>name</code> attribute is
|
|
specified, then it defaults to "scsi_host". To keep backwards
|
|
compatibility, this attribute is optional <b>only</b> for the
|
|
"scsi_host" adapter, but is mandatory for the "fc_host" adapter.
|
|
<span class="since">Since 1.0.5</span>
|
|
A "fc_host" capable scsi_hostN can be determined by using
|
|
<code>virsh nodedev-list --cap fc_host</code>.
|
|
<span class="since">Since 1.2.8</span>
|
|
<p>
|
|
Note: Regardless of whether a "scsi_host" adapter type is defined
|
|
using a <code>name</code> or a <code>parentaddr</code>, it
|
|
should refer to a real scsi_host adapter as found through a
|
|
<code>virsh nodedev-list scsi_host</code> and <code>virsh
|
|
nodedev-dumpxml scsi_hostN</code> on one of the scsi_host's
|
|
displayed. It should not refer to a "fc_host" capable scsi_hostN
|
|
nor should it refer to the vHBA created for some "fc_host"
|
|
adapter. For a vHBA the <code>nodedev-dumpxml</code>
|
|
output parent setting will be the "fc_host" capable scsi_hostN
|
|
value. Additionally, do not refer to an iSCSI scsi_hostN for the
|
|
"scsi_host" source. An iSCSI scsi_hostN's
|
|
<code>nodedev-dumpxml</code> output parent field is generally
|
|
"computer". This is a libvirt created parent value indicating
|
|
no parent was defined for the node device.
|
|
</p>
|
|
</dd>
|
|
</dl>
|
|
<dl>
|
|
<dt><code>wwnn</code> and <code>wwpn</code></dt>
|
|
<dd>The "World Wide Node Name" (<code>wwnn</code>) and "World Wide
|
|
Port Name" (<code>wwpn</code>) are used by the "fc_host" adapter
|
|
to uniquely identify the device in the Fibre Channel storage fabric
|
|
(the device can be either a HBA or vHBA). Both wwnn and wwpn should
|
|
be specified. Use the command 'virsh nodedev-dumpxml' to determine
|
|
how to set the values for the wwnn/wwpn of a (v)HBA. The wwnn and
|
|
wwpn have very specific numerical format requirements based on the
|
|
hypervisor being used, thus care should be taken if you decide to
|
|
generate your own to follow the standards; otherwise, the pool
|
|
will fail to start with an opaque error message indicating failure
|
|
to write to the vport_create file during vport create/delete due
|
|
to "No such file or directory".
|
|
<span class="since">Since 1.0.4</span>
|
|
</dd>
|
|
</dl>
|
|
<dl>
|
|
<dt><code>parent</code></dt>
|
|
<dd>Used by the "fc_host" adapter type to optionally specify the
|
|
parent scsi_host device defined in the
|
|
<a href="formatnode.html">Node Device</a> database as the
|
|
<a href="http://wiki.libvirt.org/page/NPIV_in_libvirt">NPIV</a>
|
|
virtual Host Bus Adapter (vHBA). The value provided must be
|
|
a vport capable scsi_host. The value is not the scsi_host of
|
|
the vHBA created by 'virsh nodedev-create', rather it is
|
|
the parent of that vHBA. If the value is not provided, libvirt
|
|
will determine the parent based either finding the wwnn,wwpn
|
|
defined for an existing scsi_host or by creating a vHBA. Providing
|
|
the parent attribute is also useful for the duplicate pool
|
|
definition checks. This is more important in environments where
|
|
both the "fc_host" and "scsi_host" source adapter pools are being
|
|
used in order to ensure a new definition doesn't duplicate using
|
|
the scsi_hostN of some existing storage pool.
|
|
<span class="since">Since 1.0.4</span>
|
|
</dd>
|
|
<dt><code>managed</code></dt>
|
|
<dd>An optional attribute to instruct the SCSI storage backend to
|
|
manage destroying the vHBA when the pool is destroyed. For
|
|
configurations that do not provide an already created vHBA
|
|
from a 'virsh nodedev-create', libvirt will set this property
|
|
to "yes". For configurations that have already created a vHBA
|
|
via 'virsh nodedev-create' and are using the wwnn/wwpn from
|
|
that vHBA and optionally the scsi_host parent, setting this
|
|
attribute to "yes" will allow libvirt to destroy the node device
|
|
when the pool is destroyed. If this attribute is set to "no" or
|
|
not defined in the XML, then libvirt will not destroy the vHBA.
|
|
<span class="since">Since 1.2.11</span>
|
|
</dd>
|
|
</dl>
|
|
<dl>
|
|
<dt><code>parentaddr</code></dt>
|
|
<dd>Used by the "scsi_host" adapter type instead of the
|
|
<code>name</code> attribute to more uniquely identify the
|
|
SCSI host. Using a combination of the <code>unique_id</code>
|
|
attribute and the <code>address</code> element to formulate
|
|
a PCI address, a search will be performed of the
|
|
<code>/sys/class/scsi_host/hostNN</code> links for a
|
|
matching PCI address with a matching <code>unique_id</code>
|
|
value in the <code>/sys/class/scsi_host/hostNN/unique_id</code>
|
|
file. The value in the "unique_id" file will be unique enough
|
|
for the specific PCI address. The <code>hostNN</code> will be
|
|
used by libvirt as the basis to define which SCSI host is to
|
|
be used for the currently booted system.
|
|
<span class="since">Since 1.2.7</span>
|
|
<dl>
|
|
<dt><code>address</code></dt>
|
|
<dd>The PCI address of the scsi_host device to be used. Using
|
|
a PCI address provides consistent naming across system reboots
|
|
and kernel reloads. The address will have four attributes:
|
|
<code>domain</code> (a 2-byte hex integer, not currently used
|
|
by qemu), <code>bus</code> (a hex value between 0 and 0xff,
|
|
inclusive), <code>slot</code> (a hex value between 0x0 and
|
|
0x1f, inclusive), and <code>function</code> (a value between
|
|
0 and 7, inclusive). The PCI address can be determined by
|
|
listing the <code>/sys/bus/pci/devices</code> and the
|
|
<code>/sys/class/scsi_host</code> directories in order to
|
|
find the expected scsi_host device. The address will be
|
|
provided in a format such as "0000:00:1f:2" which can be
|
|
used to generate the expected PCI address
|
|
"domain='0x0000' bus='0x00' slot='0x1f' function='0x0'".
|
|
Optionally, using the combination of the commands 'virsh
|
|
nodedev-list scsi_host' and 'virsh nodedev-dumpxml' for a
|
|
specific list entry and converting the resulting
|
|
<code>path</code> element as the basis to formulate the
|
|
correctly formatted PCI address.
|
|
</dd>
|
|
</dl>
|
|
<dl>
|
|
<dt><code>unique_id</code></dt>
|
|
<dd>Required <code>parentaddr</code> attribute used to determine
|
|
which of the scsi_host adapters for the provided PCI address
|
|
should be used. The value is determine by contents of the
|
|
<code>unique_id</code> file for the specific scsi_host adapter.
|
|
For a PCI address of "0000:00:1f:2", the unique identifer files
|
|
can be found using the command
|
|
<code>find -H /sys/class/scsi_host/host*/unique_id |
|
|
xargs grep '[0-9]'</code>. Optionally, the
|
|
<code>virsh nodedev-dumpxml scsi_hostN</code>' of a
|
|
specific scsi_hostN list entry will list the
|
|
<code>unique_id</code> value.
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
</dl>
|
|
</dd>
|
|
<dt><code>host</code></dt>
|
|
<dd>Provides the source for pools backed by storage from a
|
|
remote server (pool types <code>netfs</code>, <code>iscsi</code>,
|
|
<code>rbd</code>, <code>sheepdog</code>, <code>gluster</code>). Will be
|
|
used in combination with a <code>directory</code>
|
|
or <code>device</code> element. Contains an attribute <code>name</code>
|
|
which is the hostname or IP address of the server. May optionally
|
|
contain a <code>port</code> attribute for the protocol specific
|
|
port number. Duplicate storage pool definition checks may perform
|
|
a cursory check that the same host name by string comparison in the
|
|
new pool does not match an existing pool's source host name when
|
|
combined with the <code>directory</code> or <code>device</code>
|
|
element. Name resolution of the provided hostname or IP address
|
|
is left to the storage driver backend interactions with the remote
|
|
server. See the <a href="storage.html">storage driver page</a> for
|
|
any restrictions for specific storage backends.
|
|
<span class="since">Since 0.4.1</span></dd>
|
|
<dt><code>auth</code></dt>
|
|
<dd>If present, the <code>auth</code> element provides the
|
|
authentication credentials needed to access the source by the
|
|
setting of the <code>type</code> attribute (pool
|
|
types <code>iscsi</code>, <code>rbd</code>). The <code>type</code>
|
|
must be either "chap" or "ceph". Use "ceph" for
|
|
Ceph RBD (Rados Block Device) network sources and use "iscsi" for CHAP
|
|
(Challenge-Handshake Authentication Protocol) iSCSI
|
|
targets. Additionally a mandatory attribute
|
|
<code>username</code> identifies the username to use during
|
|
authentication as well as a sub-element <code>secret</code> with
|
|
a mandatory attribute <code>type</code>, to tie back to a
|
|
<a href="formatsecret.html">libvirt secret object</a> that
|
|
holds the actual password or other credentials. The domain XML
|
|
intentionally does not expose the password, only the reference
|
|
to the object that manages the password.
|
|
The <code>secret</code> element requires either a <code>uuid</code>
|
|
attribute with the UUID of the secret object or a <code>usage</code>
|
|
attribute matching the key that was specified in the
|
|
secret object. <span class="since">Since 0.9.7 for "ceph" and
|
|
1.1.1 for "chap"</span>
|
|
</dd>
|
|
<dt><code>name</code></dt>
|
|
<dd>Provides the source for pools backed by storage from a
|
|
named element (pool types <code>logical</code>, <code>rbd</code>,
|
|
<code>sheepdog</code>, <code>gluster</code>). Contains a
|
|
string identifier.
|
|
<span class="since">Since 0.4.5</span></dd>
|
|
<dt><code>format</code></dt>
|
|
<dd>Provides information about the format of the pool (pool
|
|
types <code>fs</code>, <code>netfs</code>, <code>disk</code>,
|
|
<code>logical</code>). This
|
|
contains a single attribute <code>type</code> whose value is
|
|
backend specific. This is typically used to indicate filesystem
|
|
type, or network filesystem type, or partition table type, or
|
|
LVM metadata type. All drivers are required to have a default
|
|
value for this, so it is optional. <span class="since">Since 0.4.1</span></dd>
|
|
|
|
<dt><code>vendor</code></dt>
|
|
<dd>Provides optional information about the vendor of the
|
|
storage device. This contains a single
|
|
attribute <code>name</code> whose value is backend
|
|
specific. <span class="since">Since 0.8.4</span></dd>
|
|
<dt><code>product</code></dt>
|
|
<dd>Provides an optional product name of the storage device.
|
|
This contains a single attribute <code>name</code> whose value
|
|
is backend specific. <span class="since">Since 0.8.4</span></dd>
|
|
</dl>
|
|
|
|
<h3><a name="StoragePoolTarget">Target elements</a></h3>
|
|
|
|
<p>
|
|
A single <code>target</code> element is contained within the top level
|
|
<code>pool</code> element for some types of pools (pool
|
|
types <code>dir</code>, <code>fs</code>, <code>netfs</code>,
|
|
<code>logical</code>, <code>disk</code>, <code>iscsi</code>,
|
|
<code>scsi</code>, <code>mpath</code>). This tag is used to
|
|
describe the mapping of
|
|
the storage pool into the host filesystem. It can contain the following
|
|
child elements:
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<target>
|
|
<path>/dev/disk/by-path</path>
|
|
<permissions>
|
|
<owner>107</owner>
|
|
<group>107</group>
|
|
<mode>0744</mode>
|
|
<label>virt_image_t</label>
|
|
</permissions>
|
|
<timestamps>
|
|
<atime>1341933637.273190990</atime>
|
|
<mtime>1341930622.047245868</mtime>
|
|
<ctime>1341930622.047245868</ctime>
|
|
</timestamps>
|
|
<encryption type='...'>
|
|
...
|
|
</encryption>
|
|
</target>
|
|
</pool></pre>
|
|
|
|
<dl>
|
|
<dt><code>path</code></dt>
|
|
<dd>Provides the location at which the pool will be mapped into
|
|
the local filesystem namespace, as an absolute path. For a
|
|
filesystem/directory based pool it will be a fully qualified name of
|
|
the directory in which volumes will be created. For device based pools
|
|
it will be a fully qualified name of the directory in which
|
|
devices nodes exist. For the latter <code>/dev/</code> may seem
|
|
like the logical choice, however, devices nodes there are not
|
|
guaranteed stable across reboots, since they are allocated on
|
|
demand. It is preferable to use a stable location such as one
|
|
of the <code>/dev/disk/by-{path|id|uuid|label}</code> locations.
|
|
For a Multipath pool (type <code>mpath</code>), the provided
|
|
value is ignored and the default value of "/dev/mapper" is used.
|
|
<span class="since">Since 0.4.1</span>
|
|
</dd>
|
|
<dt><code>permissions</code></dt>
|
|
<dd>This is currently only useful for directory or filesystem based
|
|
pools, which are mapped as a directory into the local filesystem
|
|
namespace. It provides information about the permissions to use for the
|
|
final directory when the pool is built. There are 4 child elements.
|
|
The <code>mode</code> element contains the octal permission set.
|
|
The <code>mode</code> defaults to 0755 when not provided.
|
|
The <code>owner</code> element contains the numeric user ID.
|
|
The <code>group</code> element contains the numeric group ID.
|
|
If <code>owner</code> or <code>group</code> aren't specified when
|
|
creating a directory, the values are inherited from the parent
|
|
directory. The <code>label</code> element contains the MAC (eg SELinux)
|
|
label string.
|
|
<span class="since">Since 0.4.1</span>
|
|
For running directory or filesystem based pools, these fields
|
|
will be filled with the values used by the existing directory.
|
|
<span class="since">Since 1.2.16</span>
|
|
</dd>
|
|
<dt><code>timestamps</code></dt>
|
|
<dd>Provides timing information about the volume. Up to four
|
|
sub-elements are present,
|
|
where <code>atime</code>, <code>btime</code>, <code>ctime</code>
|
|
and <code>mtime</code> hold the access, birth, change and
|
|
modification time of the volume, where known. The used time
|
|
format is <seconds>.<nanoseconds> since the
|
|
beginning of the epoch (1 Jan 1970). If nanosecond resolution
|
|
is 0 or otherwise unsupported by the host OS or filesystem,
|
|
then the nanoseconds part is omitted. This is a readonly
|
|
attribute and is ignored when creating a volume.
|
|
<span class="since">Since 0.10.0</span>
|
|
</dd>
|
|
<dt><code>encryption</code></dt>
|
|
<dd>If present, specifies how the volume is encrypted. See
|
|
the <a href="formatstorageencryption.html">Storage Encryption</a> page
|
|
for more information.
|
|
</dd>
|
|
</dl>
|
|
|
|
<h3><a name="StoragePoolExtents">Device extents</a></h3>
|
|
|
|
<p>
|
|
If a storage pool exposes information about its underlying
|
|
placement / allocation scheme, the <code>device</code> element
|
|
within the <code>source</code> element may contain information
|
|
about its available extents. Some pools have a constraint that
|
|
a volume must be allocated entirely within a single constraint
|
|
(eg disk partition pools). Thus the extent information allows an
|
|
application to determine the maximum possible size for a new
|
|
volume
|
|
</p>
|
|
<p>
|
|
For storage pools supporting extent information, within each
|
|
<code>device</code> element there will be zero or more <code>freeExtent</code>
|
|
elements. Each of these elements contains two attributes, <code>start</code>
|
|
and <code>end</code> which provide the boundaries of the extent on the
|
|
device, measured in bytes. <span class="since">Since 0.4.1</span>
|
|
</p>
|
|
|
|
<h2><a name="StorageVol">Storage volume XML</a></h2>
|
|
<p>
|
|
A storage volume will generally be either a file or a device
|
|
node; <span class="since">since 1.2.0</span>, an optional
|
|
output-only attribute <code>type</code> lists the actual type
|
|
(file, block, dir, network, netdir or ploop), which is also available
|
|
from <code>virStorageVolGetInfo()</code>. The storage volume
|
|
XML format is available <span class="since">since 0.4.1</span>
|
|
</p>
|
|
|
|
<h3><a name="StorageVolFirst">General metadata</a></h3>
|
|
|
|
<pre>
|
|
<volume type='file'>
|
|
<name>sparse.img</name>
|
|
<key>/var/lib/xen/images/sparse.img</key>
|
|
<allocation>0</allocation>
|
|
<capacity unit="T">1</capacity>
|
|
...</pre>
|
|
|
|
<dl>
|
|
<dt><code>name</code></dt>
|
|
<dd>Providing a name for the volume which is unique to the pool.
|
|
This is mandatory when defining a volume. For a disk pool, the
|
|
name must be combination of the <code>source</code> device path
|
|
device and next partition number to be created. For example, if
|
|
the <code>source</code> device path is /dev/sdb and there are no
|
|
partitions on the disk, then the name must be sdb1 with the next
|
|
name being sdb2 and so on.
|
|
<span class="since">Since 0.4.1</span></dd>
|
|
<dt><code>key</code></dt>
|
|
<dd>Providing an identifier for the volume which identifies a
|
|
single volume. In some cases it's possible to have two distinct keys
|
|
identifying a single volume. This field cannot be set when creating
|
|
a volume: it is always generated.
|
|
<span class="since">Since 0.4.1</span></dd>
|
|
<dt><code>allocation</code></dt>
|
|
<dd>Providing the total storage allocation for the volume. This
|
|
may be smaller than the logical capacity if the volume is sparsely
|
|
allocated. It may also be larger than the logical capacity if the
|
|
volume has substantial metadata overhead. This value is in bytes.
|
|
If omitted when creating a volume, the volume will be fully
|
|
allocated at time of creation. If set to a value smaller than the
|
|
capacity, the pool has the <strong>option</strong> of deciding
|
|
to sparsely allocate a volume. It does not have to honour requests
|
|
for sparse allocation though. Different types of pools may treat
|
|
sparse volumes differently. For example, the <code>logical</code>
|
|
pool will not automatically expand volume's allocation when it
|
|
gets full; the user is responsible for doing that or configuring
|
|
dmeventd to do so automatically.<br/>
|
|
<br/>
|
|
By default this is specified in bytes, but an optional attribute
|
|
<code>unit</code> can be specified to adjust the passed value.
|
|
Values can be: 'B' or 'bytes' for bytes, 'KB' (kilobytes,
|
|
10<sup>3</sup> or 1000 bytes), 'K' or 'KiB' (kibibytes,
|
|
2<sup>10</sup> or 1024 bytes), 'MB' (megabytes, 10<sup>6</sup>
|
|
or 1,000,000 bytes), 'M' or 'MiB' (mebibytes, 2<sup>20</sup>
|
|
or 1,048,576 bytes), 'GB' (gigabytes, 10<sup>9</sup> or
|
|
1,000,000,000 bytes), 'G' or 'GiB' (gibibytes, 2<sup>30</sup>
|
|
or 1,073,741,824 bytes), 'TB' (terabytes, 10<sup>12</sup> or
|
|
1,000,000,000,000 bytes), 'T' or 'TiB' (tebibytes,
|
|
2<sup>40</sup> or 1,099,511,627,776 bytes), 'PB' (petabytes,
|
|
10<sup>15</sup> or 1,000,000,000,000,000 bytes), 'P' or 'PiB'
|
|
(pebibytes, 2<sup>50</sup> or 1,125,899,906,842,624 bytes),
|
|
'EB' (exabytes, 10<sup>18</sup> or 1,000,000,000,000,000,000
|
|
bytes), or 'E' or 'EiB' (exbibytes, 2<sup>60</sup> or
|
|
1,152,921,504,606,846,976 bytes). <span class="since">Since
|
|
0.4.1, multi-character <code>unit</code> since
|
|
0.9.11</span></dd>
|
|
<dt><code>capacity</code></dt>
|
|
<dd>Providing the logical capacity for the volume. This value is
|
|
in bytes by default, but a <code>unit</code> attribute can be
|
|
specified with the same semantics as for <code>allocation</code>
|
|
This is compulsory when creating a volume.
|
|
<span class="since">Since 0.4.1</span></dd>
|
|
<dt><code>source</code></dt>
|
|
<dd>Provides information about the underlying storage allocation
|
|
of the volume. This may not be available for some pool types.
|
|
<span class="since">Since 0.4.1</span></dd>
|
|
<dt><code>target</code></dt>
|
|
<dd>Provides information about the representation of the volume
|
|
on the local host. <span class="since">Since 0.4.1</span></dd>
|
|
</dl>
|
|
|
|
<h3><a name="StorageVolTarget">Target elements</a></h3>
|
|
|
|
<p>
|
|
A single <code>target</code> element is contained within the top level
|
|
<code>volume</code> element. This tag is used to describe the mapping of
|
|
the storage volume into the host filesystem. It can contain the following
|
|
child elements:
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<target>
|
|
<path>/var/lib/virt/images/sparse.img</path>
|
|
<format type='qcow2'/>
|
|
<permissions>
|
|
<owner>107</owner>
|
|
<group>107</group>
|
|
<mode>0744</mode>
|
|
<label>virt_image_t</label>
|
|
</permissions>
|
|
<compat>1.1</compat>
|
|
<nocow/>
|
|
<features>
|
|
<lazy_refcounts/>
|
|
</features>
|
|
</target></pre>
|
|
|
|
<dl>
|
|
<dt><code>path</code></dt>
|
|
<dd>Provides the location at which the volume can be accessed on
|
|
the local filesystem, as an absolute path. This is a readonly
|
|
attribute, so shouldn't be specified when creating a volume.
|
|
<span class="since">Since 0.4.1</span></dd>
|
|
<dt><code>format</code></dt>
|
|
<dd>Provides information about the pool specific volume format.
|
|
For disk pools it will provide the partition table format type, but is
|
|
not preserved after a pool refresh or libvirtd restart. Use extended
|
|
in order to create an extended disk extent partition. For filesystem
|
|
or directory pools it will provide the file format type, eg cow,
|
|
qcow, vmdk, raw. If omitted when creating a volume, the pool's
|
|
default format will be used. The actual format is specified via
|
|
the <code>type</code> attribute. Consult the
|
|
<a href="storage.html">storage driver page</a> for the list of valid
|
|
volume format type values for each specific pool. The
|
|
<code>format</code> will be ignored on input for pools without a
|
|
volume format type value and the default pool format will be used.
|
|
<span class="since">Since 0.4.1</span></dd>
|
|
<dt><code>permissions</code></dt>
|
|
<dd>Provides information about the permissions to use
|
|
when creating volumes. This is currently only useful for directory
|
|
or filesystem based pools, where the volumes allocated are simple
|
|
files. For pools where the volumes are device nodes, the hotplug
|
|
scripts determine permissions. There are 4 child elements.
|
|
The <code>mode</code> element contains the octal permission set.
|
|
The <code>mode</code> defaults to 0600 when not provided.
|
|
The <code>owner</code> element contains the numeric user ID.
|
|
The <code>group</code> element contains the numeric group ID.
|
|
If <code>owner</code> or <code>group</code> aren't specified when
|
|
creating a supported volume, the values are inherited from the parent
|
|
directory. The <code>label</code> element contains the MAC (eg SELinux)
|
|
label string.
|
|
For existing directory or filesystem based volumes, these fields
|
|
will be filled with the values used by the existing file.
|
|
<span class="since">Since 0.4.1</span>
|
|
</dd>
|
|
<dt><code>compat</code></dt>
|
|
<dd>Specify compatibility level. So far, this is only used for
|
|
<code>type='qcow2'</code> volumes. Valid values are <code>0.10</code>
|
|
and <code>1.1</code> so far, specifying QEMU version the images should
|
|
be compatible with. If the <code>feature</code> element is present,
|
|
1.1 is used.
|
|
<span class="since">Since 1.1.0</span> If omitted, 0.10 is used.
|
|
<span class="since">Since 1.1.2</span>
|
|
</dd>
|
|
<dt><code>nocow</code></dt>
|
|
<dd>Turn off COW of the newly created volume. So far, this is only valid
|
|
for a file image in btrfs file system. It will improve performance when
|
|
the file image is used in VM. To create non-raw file images, it
|
|
requires QEMU version since 2.1. <span class="since">Since 1.2.7</span>
|
|
</dd>
|
|
<dt><code>features</code></dt>
|
|
<dd>Format-specific features. Only used for <code>qcow2</code> now.
|
|
Valid sub-elements are:
|
|
<ul>
|
|
<li><code><lazy_refcounts/></code> - allow delayed reference
|
|
counter updates. <span class="since">Since 1.1.0</span></li>
|
|
</ul>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h3><a name="StorageVolBacking">Backing store elements</a></h3>
|
|
|
|
<p>
|
|
A single <code>backingStore</code> element is contained within the top level
|
|
<code>volume</code> element. This tag is used to describe the optional copy
|
|
on write, backing store for the storage volume. It can contain the following
|
|
child elements:
|
|
</p>
|
|
|
|
<pre>
|
|
...
|
|
<backingStore>
|
|
<path>/var/lib/virt/images/master.img</path>
|
|
<format type='raw'/>
|
|
<permissions>
|
|
<owner>107</owner>
|
|
<group>107</group>
|
|
<mode>0744</mode>
|
|
<label>virt_image_t</label>
|
|
</permissions>
|
|
</backingStore>
|
|
</volume></pre>
|
|
|
|
<dl>
|
|
<dt><code>path</code></dt>
|
|
<dd>Provides the location at which the backing store can be accessed on
|
|
the local filesystem, as an absolute path. If omitted, there is no
|
|
backing store for this volume.
|
|
<span class="since">Since 0.6.0</span></dd>
|
|
<dt><code>format</code></dt>
|
|
<dd>Provides information about the pool specific backing store format.
|
|
For disk pools it will provide the partition type. For filesystem
|
|
or directory pools it will provide the file format type, eg cow,
|
|
qcow, vmdk, raw. The actual format is specified via the type attribute.
|
|
Consult the pool-specific docs for the list of valid
|
|
values. Most file formats require a backing store of the same format,
|
|
however, the qcow2 format allows a different backing store format.
|
|
<span class="since">Since 0.6.0</span></dd>
|
|
<dt><code>permissions</code></dt>
|
|
<dd>Provides information about the permissions of the backing file.
|
|
See volume <code>permissions</code> documentation for explanation
|
|
of individual fields.
|
|
<span class="since">Since 0.6.0</span>
|
|
</dd>
|
|
</dl>
|
|
|
|
<h2><a name="examples">Example configuration</a></h2>
|
|
|
|
<p>
|
|
Here are a couple of examples, for a more complete set demonstrating
|
|
every type of storage pool, consult the <a href="storage.html">storage driver page</a>
|
|
</p>
|
|
|
|
<h3><a name="exampleFile">File based storage pool</a></h3>
|
|
|
|
<pre>
|
|
<pool type="dir">
|
|
<name>virtimages</name>
|
|
<target>
|
|
<path>/var/lib/virt/images</path>
|
|
</target>
|
|
</pool></pre>
|
|
|
|
<h3><a name="exampleISCSI">iSCSI based storage pool</a></h3>
|
|
|
|
<pre>
|
|
<pool type="iscsi">
|
|
<name>virtimages</name>
|
|
<source>
|
|
<host name="iscsi.example.com"/>
|
|
<device path="iqn.2013-06.com.example:iscsi-pool"/>
|
|
<auth type='chap' username='myuser'>
|
|
<secret usage='libvirtiscsi'/>
|
|
</auth>
|
|
</source>
|
|
<target>
|
|
<path>/dev/disk/by-path</path>
|
|
</target>
|
|
</pool></pre>
|
|
|
|
<h3><a name="exampleVol">Storage volume</a></h3>
|
|
|
|
<pre>
|
|
<volume>
|
|
<name>sparse.img</name>
|
|
<allocation>0</allocation>
|
|
<capacity unit="T">1</capacity>
|
|
<target>
|
|
<path>/var/lib/virt/images/sparse.img</path>
|
|
<permissions>
|
|
<owner>107</owner>
|
|
<group>107</group>
|
|
<mode>0744</mode>
|
|
<label>virt_image_t</label>
|
|
</permissions>
|
|
</target>
|
|
</volume></pre>
|
|
|
|
<h3><a name="exampleLuks">Storage volume using LUKS</a></h3>
|
|
|
|
<pre>
|
|
<volume>
|
|
<name>MyLuks.img</name>
|
|
<capacity unit="G">5</capacity>
|
|
<target>
|
|
<path>/var/lib/virt/images/MyLuks.img</path>
|
|
<format type='raw'/>
|
|
<encryption format='luks'>
|
|
<secret type='passphrase' uuid='f52a81b2-424e-490c-823d-6bd4235bc572'/>
|
|
</encryption>
|
|
</target>
|
|
</volume>
|
|
</pre>
|
|
</body>
|
|
</html>
|