libvirt/docs/drvlxc.html.in
Daniel P. Berrange 41beacd925 Expand documentation for LXC driver
Update the LXC driver documentation to describe the way
containers are setup by default. Also describe the common
virsh commands for managing containers and a little about
the security. Placeholders for docs about configuring
containers still to be filled in.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-16 10:11:14 +01:00

473 lines
15 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<body>
<h1>LXC container driver</h1>
<ul id="toc"></ul>
<p>
The libvirt LXC driver manages "Linux Containers". At their simplest, containers
can just be thought of as a collection of processes, separated from the main
host processes via a set of resource namespaces and constrained via control
groups resource tunables. The libvirt LXC driver has no dependency on the LXC
userspace tools hosted on sourceforge.net. It directly utilizes the relevant
kernel features to build the container environment. This allows for sharing
of many libvirt technologies across both the QEMU/KVM and LXC drivers. In
particular sVirt for mandatory access control, auditing of operations,
integration with control groups and many other features.
</p>
<h2><a name="cgroups">Control groups Requirements</a></h2>
<p>
In order to control the resource usage of processes inside containers, the
libvirt LXC driver requires that certain cgroups controllers are mounted on
the host OS. The minimum required controllers are 'cpuacct', 'memory' and
'devices', while recommended extra controllers are 'cpu', 'freezer' and
'blkio'. Libvirt will not mount the cgroups filesystem itself, leaving
this up to the init system to take care of. Systemd will do the right thing
in this respect, while for other init systems the <code>cgconfig</code>
init service will be required. For further information, consult the general
libvirt <a href="cgroups.html">cgroups documentation</a>.
</p>
<h2><a name="namespaces">Namespace requirements</a></h2>
<p>
In order to separate processes inside a container from those in the
primary "host" OS environment, the libvirt LXC driver requires that
certain kernel namespaces are compiled in. Libvirt currently requires
the 'mount', 'ipc', 'pid', and 'uts' namespaces to be available. If
separate network interfaces are desired, then the 'net' namespace is
required. In the near future, the 'user' namespace will optionally be
supported.
</p>
<p>
<strong>NOTE: In the absence of support for the 'user' namespace,
processes inside containers cannot be securely isolated from host
process without the use of a mandatory access control technology
such as SELinux or AppArmor.</strong>
</p>
<h2><a name="init">Default container setup</a></h2>
<h3><a name="cliargs">Command line arguments</a></h3>
<p>
When the container "init" process is started, it will typically
not be given any command line arguments (eg the equivalent of
the bootloader args visible in <code>/proc/cmdline</code>). If
any arguments are desired, then must be explicitly set in the
container XML configuration via one or more <code>initarg</code>
elements. For example, to run <code>systemd --unit emergency.service</code>
would use the following XML
</p>
<pre>
&lt;os&gt;
&lt;type arch='x86_64'&gt;exe&lt;/type&gt;
&lt;init&gt;/bin/systemd&lt;/init&gt;
&lt;initarg&gt;--unit&lt;/initarg&gt;
&lt;initarg&gt;emergency.service&lt;/initarg&gt;
&lt;/os&gt;
</pre>
<h3><a name="envvars">Environment variables</a></h3>
<p>
When the container "init" process is started, it will be given several useful
environment variables. The following standard environment variables are mandated
by <a href="http://www.freedesktop.org/wiki/Software/systemd/ContainerInterface">systemd container interface</a>
to be provided by all container technologies on Linux.
</p>
<dl>
<dt>container</dt>
<dd>The fixed string <code>libvirt-lxc</code> to identify libvirt as the creator</dd>
<dt>container_uuid</dt>
<dd>The UUID assigned to the container by libvirt</dd>
<dt>PATH</dt>
<dd>The fixed string <code>/bin:/usr/bin</code></dd>
<dt>TERM</dt>
<dd>The fixed string <code>linux</code></dd>
</dl>
<p>
In addition to the standard variables, the following libvirt specific
environment variables are also provided
</p>
<dl>
<dt>LIBVIRT_LXC_NAME</dt>
<dd>The name assigned to the container by libvirt</dd>
<dt>LIBVIRT_LXC_UUID</dt>
<dd>The UUID assigned to the container by libvirt</dd>
<dt>LIBVIRT_LXC_CMDLINE</dt>
<dd>The unparsed command line arguments specified in the container configuration.
Use of this is discouraged, in favour of passing arguments directly to the
container init process via the <code>initarg</code> config element.</dd>
</dl>
<h3><a name="fsmounts">Filesystem mounts</a></h3>
<p>
In the absence of any explicit configuration, the container will
inherit the host OS filesystem mounts. A number of mount points will
be made read only, or re-mounted with new instances to provide
container specific data. The following special mounts are setup
by libvirt
</p>
<ul>
<li><code>/dev</code> a new "tmpfs" pre-populated with authorized device nodes</li>
<li><code>/dev/pts</code> a new private "devpts" instance for console devices</li>
<li><code>/sys</code> the host "sysfs" instance remounted read-only</li>
<li><code>/proc</code> a new instance of the "proc" filesystem</li>
<li><code>/proc/sys</code> the host "/proc/sys" bind-mounted read-only</li>
<li><code>/sys/fs/selinux</code> the host "selinux" instance remounted read-only</li>
<li><code>/sys/fs/cgroup/NNNN</code> the host cgroups controllers bind-mounted to
only expose the sub-tree associated with the container</li>
<li><code>/proc/meminfo</code> a FUSE backed file reflecting memory limits of the container</li>
</ul>
<h3><a name="devnodes">Device nodes</a></h3>
<p>
The container init process will be started with <code>CAP_MKNOD</code>
capability removed and blocked from re-acquiring it. As such it will
not be able to create any device nodes in <code>/dev</code> or anywhere
else in its filesystems. Libvirt itself will take care of pre-populating
the <code>/dev</code> filesystem with any devices that the container
is authorized to use. The current devices that will be made available
to all containers are
</p>
<ul>
<li><code>/dev/zero</code></li>
<li><code>/dev/null</code></li>
<li><code>/dev/full</code></li>
<li><code>/dev/random</code></li>
<li><code>/dev/urandom</code></li>
<li><code>/dev/stdin</code> symlinked to <code>/proc/self/fd/0</code></li>
<li><code>/dev/stdout</code> symlinked to <code>/proc/self/fd/1</code></li>
<li><code>/dev/stderr</code> symlinked to <code>/proc/self/fd/2</code></li>
<li><code>/dev/fd</code> symlinked to <code>/proc/self/fd</code></li>
<li><code>/dev/ptmx</code> symlinked to <code>/dev/pts/ptmx</code></li>
<li><code>/dev/console</code> symlinked to <code>/dev/pts/0</code></li>
</ul>
<p>
In addition, for every console defined in the guest configuration,
a symlink will be created from <code>/dev/ttyN</code> symlinked to
the corresponding <code>/dev/pts/M</code> pseudo TTY device. The
first console will be <code>/dev/tty1</code>, with further consoles
numbered incrementally from there.
</p>
<p>
Further block or character devices will be made available to containers
depending on their configuration.
</p>
<!--
<h2>Container configuration</h2>
<h3>Init process</h3>
<h3>Console devices</h3>
<h3>Filesystem devices</h3>
<h3>Disk devices</h3>
<h3>Block devices</h3>
<h3>USB devices</h3>
<h3>Character devices</h3>
<h3>Network devices</h3>
-->
<h2>Container security</h2>
<h3>sVirt SELinux</h3>
<p>
In the absence of the "user" namespace being used, containers cannot
be considered secure against exploits of the host OS. The sVirt SELinux
driver provides a way to secure containers even when the "user" namespace
is not used. The cost is that writing a policy to allow execution of
arbitrary OS is not practical. The SELinux sVirt policy is typically
tailored to work with an simpler application confinement use case,
as provided by the "libvirt-sandbox" project.
</p>
<h3>Auditing</h3>
<p>
The LXC driver is integrated with libvirt's auditing subsystem, which
causes audit messages to be logged whenever there is an operation
performed against a container which has impact on host resources.
So for example, start/stop, device hotplug will all log audit messages
providing details about what action occurred and any resources
associated with it. There are the following 3 types of audit messages
</p>
<ul>
<li><code>VIRT_MACHINE_ID</code> - details of the SELinux process and
image security labels assigned to the container.</li>
<li><code>VIRT_CONTROL</code> - details of an action / operation
performed against a container. There are the following types of
operation
<ul>
<li><code>op=start</code> - a container has been started. Provides
the machine name, uuid and PID of the <code>libvirt_lxc</code>
controller process</li>
<li><code>op=init</code> - the init PID of the container has been
started. Provides the machine name, uuid and PID of the
<code>libvirt_lxc</code> controller process and PID of the
init process (in the host PID namespace)</li>
<li><code>op=stop</code> - a container has been stopped. Provides
the machine name, uuid</li>
</ul>
</li>
<li><code>VIRT_RESOURCE</code> - details of a host resource
associated with a container action.</li>
</ul>
<h3>Device access</h3>
<p>
All containers are launched with the CAP_MKNOD capability cleared
and removed from the bounding set. Libvirt will ensure that the
/dev filesystem is pre-populated with all devices that a container
is allowed to use. In addition, the cgroup "device" controller is
configured to block read/write/mknod from all devices except those
that a container is authorized to use.
</p>
<h2><a name="exconfig">Example configurations</a></h2>
<h3>Example config version 1</h3>
<p></p>
<pre>
&lt;domain type='lxc'&gt;
&lt;name&gt;vm1&lt;/name&gt;
&lt;memory&gt;500000&lt;/memory&gt;
&lt;os&gt;
&lt;type&gt;exe&lt;/type&gt;
&lt;init&gt;/bin/sh&lt;/init&gt;
&lt;/os&gt;
&lt;vcpu&gt;1&lt;/vcpu&gt;
&lt;clock offset='utc'/&gt;
&lt;on_poweroff&gt;destroy&lt;/on_poweroff&gt;
&lt;on_reboot&gt;restart&lt;/on_reboot&gt;
&lt;on_crash&gt;destroy&lt;/on_crash&gt;
&lt;devices&gt;
&lt;emulator&gt;/usr/libexec/libvirt_lxc&lt;/emulator&gt;
&lt;interface type='network'&gt;
&lt;source network='default'/&gt;
&lt;/interface&gt;
&lt;console type='pty' /&gt;
&lt;/devices&gt;
&lt;/domain&gt;
</pre>
<p>
In the &lt;emulator&gt; element, be sure you specify the correct path
to libvirt_lxc, if it does not live in /usr/libexec on your system.
</p>
<p>
The next example assumes there is a private root filesystem
(perhaps hand-crafted using busybox, or installed from media,
debootstrap, whatever) under /opt/vm-1-root:
</p>
<p></p>
<pre>
&lt;domain type='lxc'&gt;
&lt;name&gt;vm1&lt;/name&gt;
&lt;memory&gt;32768&lt;/memory&gt;
&lt;os&gt;
&lt;type&gt;exe&lt;/type&gt;
&lt;init&gt;/init&lt;/init&gt;
&lt;/os&gt;
&lt;vcpu&gt;1&lt;/vcpu&gt;
&lt;clock offset='utc'/&gt;
&lt;on_poweroff&gt;destroy&lt;/on_poweroff&gt;
&lt;on_reboot&gt;restart&lt;/on_reboot&gt;
&lt;on_crash&gt;destroy&lt;/on_crash&gt;
&lt;devices&gt;
&lt;emulator&gt;/usr/libexec/libvirt_lxc&lt;/emulator&gt;
&lt;filesystem type='mount'&gt;
&lt;source dir='/opt/vm-1-root'/&gt;
&lt;target dir='/'/&gt;
&lt;/filesystem&gt;
&lt;interface type='network'&gt;
&lt;source network='default'/&gt;
&lt;/interface&gt;
&lt;console type='pty' /&gt;
&lt;/devices&gt;
&lt;/domain&gt;
</pre>
<h2><a name="usage">Container usage / management</a></h2>
<p>
As with any libvirt virtualization driver, LXC containers can be
managed via a wide variety of libvirt based tools. At the lowest
level the <code>virsh</code> command can be used to perform many
tasks, by passing the <code>-c lxc:///</code> argument. As an
alternative to repeating the URI with every command, the <code>LIBVIRT_DEFAULT_URI</code>
environment variable can be set to <code>lxc:///</code>. The
examples that follow outline some common operations with virsh
and LXC. For further details about usage of virsh consult its
manual page.
</p>
<h3><a name="usageSave">Defining (saving) container configuration></a></h3>
<p>
The <code>virsh define</code> command takes an XML configuration
document and loads it into libvirt, saving the configuration on disk
</p>
<pre>
# virsh -c lxc:/// define myguest.xml
</pre>
<h3><a name="usageView">Viewing container configuration</a></h3>
<p>
The <code>virsh dumpxml</code> command can be used to view the
current XML configuration of a container. By default the XML
output reflects the current state of the container. If the
container is running, it is possible to explicitly request the
persistent configuration, instead of the current live configuration
using the <code>--inactive</code> flag
</p>
<pre>
# virsh -c lxc:/// dumpxml myguest
</pre>
<h3><a name="usageStart">Starting containers</a></h3>
<p>
The <code>virsh start</code> command can be used to start a
container from a previously defined persistent configuration
</p>
<pre>
# virsh -c lxc:/// start myguest
</pre>
<p>
It is also possible to start so called "transient" containers,
which do not require a persistent configuration to be saved
by libvirt, using the <code>virsh create</code> command.
</p>
<pre>
# virsh -c lxc:/// create myguest.xml
</pre>
<h3><a name="usageStop">Stopping containers</a></h3>
<p>
The <code>virsh shutdown</code> command can be used
to request a graceful shutdown of the container. By default
this command will first attempt to send a message to the
init process via the <code>/dev/initctl</code> device node.
If no such device node exists, then it will send SIGTERM
to PID 1 inside the container.
</p>
<pre>
# virsh -c lxc:/// shutdown myguest
</pre>
<p>
If the container does not respond to the graceful shutdown
request, it can be forceably stopped using the <code>virsh destroy</code>
</p>
<pre>
# virsh -c lxc:/// destroy myguest
</pre>
<h3><a name="usageReboot">Rebooting a container</a></h3>
<p>
The <code>virsh reboot</code> command can be used
to request a graceful shutdown of the container. By default
this command will first attempt to send a message to the
init process via the <code>/dev/initctl</code> device node.
If no such device node exists, then it will send SIGHUP
to PID 1 inside the container.
</p>
<pre>
# virsh -c lxc:/// reboot myguest
</pre>
<h3><a name="usageDelete">Undefining (deleting) a container configuration</a></h3>
<p>
The <code>virsh undefine</code> command can be used to delete the
persistent configuration of a container. If the guest is currently
running, this will turn it into a "transient" guest.
</p>
<pre>
# virsh -c lxc:/// undefine myguest
</pre>
<h3><a name="usageConnect">Connecting to a container console</a></h3>
<p>
The <code>virsh console</code> command can be used to connect
to the text console associated with a container. If the container
has been configured with multiple console devices, then the
<code>--devname</code> argument can be used to choose the
console to connect to
</p>
<pre>
# virsh -c lxc:/// console myguest
</pre>
<h3><a name="usageEnter">Running commands in a container</a></h3>
<p>
The <code>virsh lxc-enter-namespace</code> command can be used
to enter the namespaces and security context of a container
and then execute an arbitrary command.
</p>
<pre>
# virsh -c lxc:/// lxc-enter-namespace myguest -- /bin/ls -al /dev
</pre>
<h3><a name="usageTop">Monitoring container utilization</a></h3>
<p>
The <code>virt-top</code> command can be used to monitor the
activity and resource utilization of all containers on a
host
</p>
<pre>
# virt-top -c lxc:///
</pre>
</body>
</html>