libvirt/po/zh_TW.po
Daniel Veillard 93db3c61c0 * configure.in NEWS libvirt.spec* doc/* po/*: making libvirt-0.4.4
release
* src/xm_internal.c: fix xm driver serialization escapes
* tests/xmconfigtest.c tests/xmconfigdata/test-escape-paths.cfg
  tests/xmconfigdata/test-escape-paths.xml: add test for previous
  problem
Daniel
2008-06-25 08:59:37 +00:00

6745 lines
148 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# translation of zh_TW.po to Traditional Chinese
# Translation of zh_TW.po to Chinese, Traditional
# Copyright (C) 2006, 2007 Free Software Foundation, Inc.
# This file is distributed under the same license as the PACKAGE package.
#
# Chester Cheng <ccheng@redhat.com>, 2006, 2007.
msgid ""
msgstr ""
"Project-Id-Version: zh_TW\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2008-06-25 10:54+0200\n"
"PO-Revision-Date: 2007-04-10 16:18+1000\n"
"Last-Translator: Chester Cheng <ccheng@redhat.com>\n"
"Language-Team: Traditional Chinese <zh_TW@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"
#: gnulib/lib/gai_strerror.c:44
msgid "Address family for hostname not supported"
msgstr ""
#: gnulib/lib/gai_strerror.c:45
msgid "Temporary failure in name resolution"
msgstr ""
#: gnulib/lib/gai_strerror.c:46
msgid "Bad value for ai_flags"
msgstr ""
#: gnulib/lib/gai_strerror.c:47
msgid "Non-recoverable failure in name resolution"
msgstr ""
#: gnulib/lib/gai_strerror.c:48
#, fuzzy
msgid "ai_family not supported"
msgstr "呼叫函式庫失敗,可能並不支援"
#: gnulib/lib/gai_strerror.c:49
#, fuzzy
msgid "Memory allocation failure"
msgstr "改變記憶體分配"
#: gnulib/lib/gai_strerror.c:50
msgid "No address associated with hostname"
msgstr ""
#: gnulib/lib/gai_strerror.c:51
msgid "Name or service not known"
msgstr ""
#: gnulib/lib/gai_strerror.c:52
msgid "Servname not supported for ai_socktype"
msgstr ""
#: gnulib/lib/gai_strerror.c:53
msgid "ai_socktype not supported"
msgstr ""
#: gnulib/lib/gai_strerror.c:54
#, fuzzy
msgid "System error"
msgstr "系統呼叫錯誤"
#: gnulib/lib/gai_strerror.c:55
msgid "Argument buffer too small"
msgstr ""
#: gnulib/lib/gai_strerror.c:57
msgid "Processing request in progress"
msgstr ""
#: gnulib/lib/gai_strerror.c:58
msgid "Request canceled"
msgstr ""
#: gnulib/lib/gai_strerror.c:59
msgid "Request not canceled"
msgstr ""
#: gnulib/lib/gai_strerror.c:60
msgid "All requests done"
msgstr ""
#: gnulib/lib/gai_strerror.c:61
msgid "Interrupted by a signal"
msgstr ""
#: gnulib/lib/gai_strerror.c:62
msgid "Parameter string not correctly encoded"
msgstr ""
#: gnulib/lib/gai_strerror.c:74
#, fuzzy
msgid "Unknown error"
msgstr "未知的主機"
#: qemud/qemud.c:142 src/remote_internal.c:885
#, c-format
msgid "Cannot access %s '%s': %s (%d)"
msgstr ""
#: qemud/qemud.c:159
#, c-format
msgid "gnutls_certificate_allocate_credentials: %s"
msgstr ""
#: qemud/qemud.c:172
#, c-format
msgid "gnutls_certificate_set_x509_trust_file: %s"
msgstr ""
#: qemud/qemud.c:186
#, c-format
msgid "gnutls_certificate_set_x509_crl_file: %s"
msgstr ""
#: qemud/qemud.c:204
#, c-format
msgid "gnutls_certificate_set_x509_key_file: %s"
msgstr ""
#: qemud/qemud.c:217
#, c-format
msgid "gnutls_dh_params_init: %s"
msgstr ""
#: qemud/qemud.c:223
#, c-format
msgid "gnutls_dh_params_generate2: %s"
msgstr ""
#: qemud/qemud.c:241
#, fuzzy, c-format
msgid "Failed to read from signal pipe: %s"
msgstr "無法讀取描述檔 %s"
#: qemud/qemud.c:250
#, fuzzy
msgid "Reloading configuration on SIGHUP"
msgstr "分配設定"
#: qemud/qemud.c:252
#, fuzzy
msgid "Error while reloading drivers"
msgstr "分配網路"
#: qemud/qemud.c:258
#, c-format
msgid "Shutting down on signal %d"
msgstr ""
#: qemud/qemud.c:264
#, c-format
msgid "Received signal %d, dispatching to drivers"
msgstr ""
#: qemud/qemud.c:284 src/qemu_driver.c:90 src/util.c:142 src/util.c:154
msgid "Failed to set close-on-exec file descriptor flag"
msgstr ""
#: qemud/qemud.c:299 src/qemu_driver.c:105 src/util.c:138 src/util.c:150
msgid "Failed to set non-blocking file descriptor flag"
msgstr ""
#: qemud/qemud.c:440
#, fuzzy, c-format
msgid "Failed to open pid file '%s' : %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:446
#, fuzzy, c-format
msgid "Failed to fdopen pid file '%s' : %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:453
#, fuzzy, c-format
msgid "Failed to write to pid file '%s' : %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:460
#, fuzzy, c-format
msgid "Failed to close pid file '%s' : %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:477
#, fuzzy
msgid "Failed to allocate memory for struct qemud_socket"
msgstr "無法分配節點"
#: qemud/qemud.c:487
#, fuzzy, c-format
msgid "Failed to create socket: %s"
msgstr "無法讀取插槽 %d\n"
#: qemud/qemud.c:509
#, fuzzy, c-format
msgid "Failed to bind socket to '%s': %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:518
#, fuzzy, c-format
msgid "Failed to listen for connections on '%s': %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:527 qemud/qemud.c:656
msgid "Failed to add server event callback"
msgstr ""
#: qemud/qemud.c:556
#, c-format
msgid "getaddrinfo: %s\n"
msgstr ""
#: qemud/qemud.c:565
#, c-format
msgid "socket: %s"
msgstr ""
#: qemud/qemud.c:574
#, c-format
msgid "bind: %s"
msgstr ""
#: qemud/qemud.c:581
#, c-format
msgid "listen: %s"
msgstr ""
#: qemud/qemud.c:617
#, c-format
msgid "remoteListenTCP: calloc: %s"
msgstr ""
#: qemud/qemud.c:648
#, c-format
msgid "remoteListenTCP: listen: %s"
msgstr ""
#: qemud/qemud.c:695 src/qemu_driver.c:198
#, fuzzy, c-format
msgid "Failed to find user record for uid '%d': %s"
msgstr "無法為網路 %s 取消定義"
#: qemud/qemud.c:712
msgid "Resulting path too long for buffer in qemudInitPaths()"
msgstr ""
#: qemud/qemud.c:720
#, fuzzy
msgid "Failed to allocate struct qemud_server"
msgstr "無法分配節點"
#: qemud/qemud.c:764
#, fuzzy, c-format
msgid "Failed to initialize SASL authentication %s"
msgstr "無法為網路 %s 取消定義"
#: qemud/qemud.c:779
#, fuzzy, c-format
msgid "Failed to connect to system bus for PolicyKit auth: %s"
msgstr "無法連上 hypervisor"
#: qemud/qemud.c:890
#, c-format
msgid "remoteInitializeTLSSession: %s"
msgstr ""
#: qemud/qemud.c:907
#, c-format
msgid "remoteCheckDN: gnutls_x509_cert_get_dn: %s"
msgstr ""
#: qemud/qemud.c:926
#, c-format
msgid "remoteCheckDN: failed: client DN is %s"
msgstr ""
#: qemud/qemud.c:942
#, fuzzy, c-format
msgid "remoteCheckCertificate: verify failed: %s"
msgstr "操作失敗:%s"
#: qemud/qemud.c:950
msgid "remoteCheckCertificate: the client certificate is not trusted."
msgstr ""
#: qemud/qemud.c:955
msgid "remoteCheckCertificate: the client certificate has unknown issuer."
msgstr ""
#: qemud/qemud.c:960
msgid "remoteCheckCertificate: the client certificate has been revoked."
msgstr ""
#: qemud/qemud.c:966
msgid ""
"remoteCheckCertificate: the client certificate uses an insecure algorithm."
msgstr ""
#: qemud/qemud.c:975
msgid "remoteCheckCertificate: certificate is not X.509"
msgstr ""
#: qemud/qemud.c:980
msgid "remoteCheckCertificate: no peers"
msgstr ""
#: qemud/qemud.c:991
msgid "remoteCheckCertificate: gnutls_x509_crt_init failed"
msgstr ""
#: qemud/qemud.c:1001
msgid "remoteCheckCertificate: the client certificate has expired"
msgstr ""
#: qemud/qemud.c:1008
msgid "remoteCheckCertificate: the client certificate is not yet activated"
msgstr ""
#: qemud/qemud.c:1017
msgid ""
"remoteCheckCertificate: client's Distinguished Name is not on the list of "
"allowed clients (tls_allowed_dn_list). Use 'openssl x509 -in clientcert.pem "
"-text' to view the Distinguished Name field in the client certificate, or "
"run this daemon with --verbose option."
msgstr ""
#: qemud/qemud.c:1034
msgid "remoteCheckCertificate: failed to verify client's certificate"
msgstr ""
#: qemud/qemud.c:1038
msgid ""
"remoteCheckCertificate: tls_no_verify_certificate is set so the bad "
"certificate is ignored"
msgstr ""
#: qemud/qemud.c:1060
#, fuzzy, c-format
msgid "Failed to verify client credentials: %s"
msgstr "無法取得節點資訊"
#: qemud/qemud.c:1085
#, fuzzy, c-format
msgid "Failed to accept connection: %s"
msgstr "無法開啟網路 %s"
#: qemud/qemud.c:1123
#, c-format
msgid "Turn off polkit auth for privileged client %d"
msgstr ""
#: qemud/qemud.c:1162 qemud/qemud.c:1399 qemud/qemud.c:1537
#, fuzzy, c-format
msgid "TLS handshake failed: %s"
msgstr "GET 操作失敗:%s"
#: qemud/qemud.c:1227
#, c-format
msgid "read: %s"
msgstr ""
#: qemud/qemud.c:1240
#, c-format
msgid "gnutls_record_recv: %s"
msgstr ""
#: qemud/qemud.c:1423
#, c-format
msgid "write: %s"
msgstr ""
#: qemud/qemud.c:1433
#, c-format
msgid "gnutls_record_send: %s"
msgstr ""
#: qemud/qemud.c:1645
#, c-format
msgid "Signal handler reported %d errors: last error: %s"
msgstr ""
#: qemud/qemud.c:1741 qemud/qemud.c:1762
#, fuzzy, c-format
msgid "failed to allocate memory for %s config list"
msgstr "無法分配節點"
#: qemud/qemud.c:1748 qemud/qemud.c:1779
#, fuzzy, c-format
msgid "failed to allocate memory for %s config list value"
msgstr "無法分配節點"
#: qemud/qemud.c:1767 qemud/qemud.c:1790
#, c-format
msgid "remoteReadConfigFile: %s: %s: must be a string or list of strings\n"
msgstr ""
#: qemud/qemud.c:1807
#, c-format
msgid "remoteReadConfigFile: %s: %s: invalid type: got %s; expected %s\n"
msgstr ""
#: qemud/qemud.c:1828
#, c-format
msgid "remoteReadConfigFile: %s\n"
msgstr ""
#: qemud/qemud.c:1872
#, c-format
msgid "remoteReadConfigFile: %s: %s: unsupported auth %s\n"
msgstr ""
#: qemud/qemud.c:1949
msgid "Cannot set group when not running as root"
msgstr ""
#: qemud/qemud.c:1953
#, fuzzy, c-format
msgid "Failed to lookup group '%s'"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:1966 qemud/qemud.c:1977
#, fuzzy, c-format
msgid "Failed to parse mode '%s'"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:2150
#, fuzzy, c-format
msgid "Failed to fork as daemon: %s"
msgstr "無法繼續區域 %s"
#: qemud/qemud.c:2172
#, fuzzy, c-format
msgid "Failed to create pipe: %s"
msgstr "無法讀取插槽 %d\n"
#: qemud/qemud.c:2205
#, fuzzy, c-format
msgid "Failed to change group ownership of %s"
msgstr "無法將區域 %s 的核心傾印至 %s"
#: qemud/qemud.c:2214
msgid "Failed to register callback for signal pipe"
msgstr ""
#: qemud/remote.c:102
msgid "xdr_remote_message_header"
msgstr ""
#: qemud/remote.c:110
#, c-format
msgid "program mismatch (actual %x, expected %x)"
msgstr ""
#: qemud/remote.c:117
#, c-format
msgid "version mismatch (actual %x, expected %x)"
msgstr ""
#: qemud/remote.c:123
#, c-format
msgid "direction (%d) != REMOTE_CALL"
msgstr ""
#: qemud/remote.c:129
#, c-format
msgid "status (%d) != REMOTE_OK"
msgstr ""
#: qemud/remote.c:145
#, fuzzy
msgid "authentication required"
msgstr "操作失敗"
#: qemud/remote.c:158
#, fuzzy, c-format
msgid "unknown procedure: %d"
msgstr "收到未知的 HTTP 錯誤碼 %d"
#: qemud/remote.c:166
#, fuzzy
msgid "parse args failed"
msgstr "無法解析伺服器的回應"
#: qemud/remote.c:182
#, c-format
msgid "internal error - dispatch function returned invalid code %d"
msgstr ""
#: qemud/remote.c:204
msgid "dummy length"
msgstr ""
#: qemud/remote.c:211
msgid "serialise reply header"
msgstr ""
#: qemud/remote.c:220
msgid "serialise return struct"
msgstr ""
#: qemud/remote.c:275
msgid "serialise return error"
msgstr ""
#: qemud/remote.c:284
msgid "xdr_setpos"
msgstr ""
#: qemud/remote.c:290
msgid "serialise return length"
msgstr ""
#: qemud/remote.c:424
msgid "connection already open"
msgstr ""
#: qemud/remote.c:450
#, fuzzy
msgid "connection not open"
msgstr "無效的連線指標,於 "
#: qemud/remote.c:497
#, fuzzy
msgid "out of memory in strdup"
msgstr "記憶體不足"
#: qemud/remote.c:608
msgid "maxCells > REMOTE_NODE_MAX_CELLS"
msgstr ""
#: qemud/remote.c:663 qemud/remote.c:705 qemud/remote.c:809 qemud/remote.c:835
#: qemud/remote.c:869 qemud/remote.c:908 qemud/remote.c:956
#: qemud/remote.c:1000 qemud/remote.c:1024 qemud/remote.c:1086
#: qemud/remote.c:1110 qemud/remote.c:1135 qemud/remote.c:1161
#: qemud/remote.c:1186 qemud/remote.c:1218 qemud/remote.c:1243
#: qemud/remote.c:1268 qemud/remote.c:1297 qemud/remote.c:1421
#: qemud/remote.c:1574 qemud/remote.c:1607 qemud/remote.c:1646
#: qemud/remote.c:1670 qemud/remote.c:1694 qemud/remote.c:1718
#: qemud/remote.c:1742 qemud/remote.c:1766 qemud/remote.c:1790
#: qemud/remote.c:1814 qemud/remote.c:1838 qemud/remote.c:1862
#, fuzzy
msgid "domain not found"
msgstr "區域資訊"
#: qemud/remote.c:694 qemud/remote.c:776
msgid "nparams too large"
msgstr ""
#: qemud/remote.c:742
#, fuzzy
msgid "unknown type"
msgstr "未知的作業系統類型"
#: qemud/remote.c:919 qemud/remote.c:965
msgid "size > maximum buffer size"
msgstr ""
#: qemud/remote.c:1303
msgid "maxinfo > REMOTE_VCPUINFO_MAX"
msgstr ""
#: qemud/remote.c:1309
msgid "maxinfo * maplen > REMOTE_CPUMAPS_MAX"
msgstr ""
#: qemud/remote.c:1471
msgid "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX"
msgstr ""
#: qemud/remote.c:1580
msgid "cpumap_len > REMOTE_CPUMAP_MAX"
msgstr ""
#: qemud/remote.c:1885 qemud/remote.c:1948 qemud/remote.c:2907
msgid "maxnames > REMOTE_NETWORK_NAME_LIST_MAX"
msgstr ""
#: qemud/remote.c:1917
msgid "maxids > REMOTE_DOMAIN_ID_LIST_MAX"
msgstr ""
#: qemud/remote.c:1981 qemud/remote.c:2041 qemud/remote.c:2065
#: qemud/remote.c:2091 qemud/remote.c:2115 qemud/remote.c:2177
#: qemud/remote.c:2201
#, fuzzy
msgid "network not found"
msgstr "網路名稱或 uuid"
#: qemud/remote.c:2292 src/remote_internal.c:3702
#, fuzzy, c-format
msgid "Cannot resolve address %d: %s"
msgstr "無法暫停區域 %s"
#: qemud/remote.c:2332
msgid "client tried invalid SASL init request"
msgstr ""
#: qemud/remote.c:2341 src/remote_internal.c:3930
#, fuzzy, c-format
msgid "failed to get sock address %d (%s)"
msgstr "無法將區域 %s 存至 %s"
#: qemud/remote.c:2352 src/remote_internal.c:3942
#, fuzzy, c-format
msgid "failed to get peer address %d (%s)"
msgstr "無法取得節點資訊"
#: qemud/remote.c:2373
#, c-format
msgid "sasl context setup failed %d (%s)"
msgstr ""
#: qemud/remote.c:2387
msgid "cannot TLS get cipher size"
msgstr ""
#: qemud/remote.c:2397
#, c-format
msgid "cannot set SASL external SSF %d (%s)"
msgstr ""
#: qemud/remote.c:2426
#, c-format
msgid "cannot set SASL security props %d (%s)"
msgstr ""
#: qemud/remote.c:2443
#, c-format
msgid "cannot list SASL mechanisms %d (%s)"
msgstr ""
#: qemud/remote.c:2453
msgid "cannot allocate mechlist"
msgstr ""
#: qemud/remote.c:2478 src/remote_internal.c:4207
#, c-format
msgid "cannot query SASL ssf on connection %d (%s)"
msgstr ""
#: qemud/remote.c:2488
#, c-format
msgid "negotiated SSF %d was not strong enough"
msgstr ""
#: qemud/remote.c:2518
#, c-format
msgid "cannot query SASL username on connection %d (%s)"
msgstr ""
#: qemud/remote.c:2526
msgid "no client username was found"
msgstr ""
#: qemud/remote.c:2536
#, fuzzy
msgid "out of memory copying username"
msgstr "記憶體不足"
#: qemud/remote.c:2555
#, c-format
msgid "SASL client %s not allowed in whitelist"
msgstr ""
#: qemud/remote.c:2581 qemud/remote.c:2660
msgid "client tried invalid SASL start request"
msgstr ""
#: qemud/remote.c:2597
#, c-format
msgid "sasl start failed %d (%s)"
msgstr ""
#: qemud/remote.c:2605
#, c-format
msgid "sasl start reply data too long %d"
msgstr ""
#: qemud/remote.c:2675
#, c-format
msgid "sasl step failed %d (%s)"
msgstr ""
#: qemud/remote.c:2684
#, c-format
msgid "sasl step reply data too long %d"
msgstr ""
#: qemud/remote.c:2733
msgid "client tried unsupported SASL init request"
msgstr ""
#: qemud/remote.c:2745
msgid "client tried unsupported SASL start request"
msgstr ""
#: qemud/remote.c:2757
msgid "client tried unsupported SASL step request"
msgstr ""
#: qemud/remote.c:2787
msgid "client tried invalid PolicyKit init request"
msgstr ""
#: qemud/remote.c:2793
msgid "cannot get peer socket identity"
msgstr ""
#: qemud/remote.c:2798
#, c-format
msgid "Checking PID %d running as %d"
msgstr ""
#: qemud/remote.c:2803
#, c-format
msgid "Failed to lookup policy kit caller: %s"
msgstr ""
#: qemud/remote.c:2811
#, fuzzy, c-format
msgid "Failed to create polkit action %s\n"
msgstr "無法建立非運作中的區域 %s\n"
#: qemud/remote.c:2821
#, fuzzy, c-format
msgid "Failed to create polkit context %s\n"
msgstr "無法建立非運作中的區域 %s\n"
#: qemud/remote.c:2841
#, c-format
msgid "Policy kit failed to check authorization %d %s"
msgstr ""
#: qemud/remote.c:2857
#, c-format
msgid "Policy kit denied action %s from pid %d, uid %d, result: %s\n"
msgstr ""
#: qemud/remote.c:2865
#, c-format
msgid "Policy allowed action %s from pid %d, uid %d, result %s"
msgstr ""
#: qemud/remote.c:2884
msgid "client tried unsupported PolicyKit init request"
msgstr ""
#: qemud/remote.c:2939
msgid "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX"
msgstr ""
#: qemud/remote.c:2972 qemud/remote.c:3032 qemud/remote.c:3057
#: qemud/remote.c:3081 qemud/remote.c:3105 qemud/remote.c:3130
#: qemud/remote.c:3161 qemud/remote.c:3187 qemud/remote.c:3270
#: qemud/remote.c:3294 qemud/remote.c:3354 qemud/remote.c:3390
#: qemud/remote.c:3421 qemud/remote.c:3557
#, fuzzy
msgid "storage_pool not found"
msgstr "網路名稱或 uuid"
#: qemud/remote.c:3348
msgid "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX"
msgstr ""
#: qemud/remote.c:3447 qemud/remote.c:3472 qemud/remote.c:3502
#: qemud/remote.c:3529
#, fuzzy
msgid "storage_vol not found"
msgstr "網路名稱或 uuid"
#: src/conf.c:155 src/conf.c:203 src/conf.c:488 src/conf.c:525 src/conf.c:553
#: src/conf.c:631
msgid "allocating configuration"
msgstr "分配設定"
#: src/conf.c:338
msgid "unterminated number"
msgstr "未中止的數量"
#: src/conf.c:372 src/conf.c:389 src/conf.c:401
msgid "unterminated string"
msgstr "未中止的字串"
#: src/conf.c:429 src/conf.c:483
msgid "expecting a value"
msgstr "預期的是數值"
#: src/conf.c:450
msgid "expecting a separator in list"
msgstr "預期的是清單式的分隔子"
#: src/conf.c:473
#, fuzzy
msgid "list is not closed with ]"
msgstr "清單並沒有以 ] 結尾"
#: src/conf.c:518
msgid "expecting a name"
msgstr "預期的是名稱"
#: src/conf.c:581
msgid "expecting a separator"
msgstr "預期的是分隔子"
#: src/conf.c:613
msgid "expecting an assignment"
msgstr "預期的是指定子"
#: src/conf.c:894 src/conf.c:950 src/lxc_conf.c:778 src/xend_internal.c:645
#: src/xend_internal.c:2299 src/xend_internal.c:2522 src/xm_internal.c:1079
#: src/xm_internal.c:1339 src/xml.c:142 src/xml.c:279 src/xml.c:1865
#: src/xml.c:1934
#, fuzzy
msgid "allocate buffer"
msgstr "分配新的緩衝區"
#: src/conf.c:901
msgid "failed to open file"
msgstr "無法開啟檔案"
#: src/conf.c:912
msgid "failed to save content"
msgstr "無法存入內容"
#: src/console.c:75
#, fuzzy, c-format
msgid "unable to open tty %s: %s\n"
msgstr "無法暫停區域 %s"
#: src/console.c:86
#, c-format
msgid "unable to get tty attributes: %s\n"
msgstr ""
#: src/console.c:95
#, c-format
msgid "unable to set tty attributes: %s\n"
msgstr ""
#: src/console.c:130
#, c-format
msgid "failure waiting for I/O: %s\n"
msgstr ""
#: src/console.c:145
#, c-format
msgid "failure reading input: %s\n"
msgstr ""
#: src/console.c:167
#, c-format
msgid "failure writing output: %s\n"
msgstr ""
#: src/hash.c:691 src/libvirt.c:738
msgid "allocating connection"
msgstr "正在分配連線"
#: src/hash.c:825 src/hash.c:830
msgid "allocating domain"
msgstr "分配區域"
#: src/hash.c:841
msgid "failed to add domain to connection hash table"
msgstr "無法為連線雜湊表新增區域"
#: src/hash.c:882
msgid "domain missing from connection hash table"
msgstr "連線雜湊表中找不到區域"
#: src/hash.c:965 src/hash.c:970
msgid "allocating network"
msgstr "分配網路"
#: src/hash.c:980
msgid "failed to add network to connection hash table"
msgstr "無法將網路加入至連線雜湊表"
#: src/hash.c:1018
msgid "network missing from connection hash table"
msgstr "連線雜湊表中找不到網路"
#: src/hash.c:1102 src/hash.c:1107
#, fuzzy
msgid "allocating storage pool"
msgstr "分配節點"
#: src/hash.c:1117
#, fuzzy
msgid "failed to add storage pool to connection hash table"
msgstr "無法將網路加入至連線雜湊表"
#: src/hash.c:1156
#, fuzzy
msgid "pool missing from connection hash table"
msgstr "連線雜湊表中找不到區域"
#: src/hash.c:1233 src/hash.c:1238 src/hash.c:1243
#, fuzzy
msgid "allocating storage vol"
msgstr "分配節點"
#: src/hash.c:1253
#, fuzzy
msgid "failed to add storage vol to connection hash table"
msgstr "無法將網路加入至連線雜湊表"
#: src/hash.c:1293
#, fuzzy
msgid "vol missing from connection hash table"
msgstr "連線雜湊表中找不到區域"
#: src/iptables.c:104
#, fuzzy
msgid "Failed to run '"
msgstr "無法讀取插槽 %d\n"
#: src/iptables.c:152
#, fuzzy
msgid "Failed to read "
msgstr "無法讀取插槽 %d\n"
#: src/iptables.c:180
#, fuzzy
msgid "Failed to write to "
msgstr "無法寫入插槽 %d\n"
#: src/iptables.c:245
#, fuzzy, c-format
msgid "Failed to create directory %s : %s"
msgstr "無法從 %s 建立網路"
#: src/iptables.c:251
#, fuzzy, c-format
msgid "Failed to saves iptables rules to %s : %s"
msgstr "無法將區域 %s 存至 %s"
#: src/iptables.c:583
#, c-format
msgid "Failed to remove iptables rule '%s' from chain '%s' in table '%s': %s"
msgstr ""
#: src/iptables.c:592
#, c-format
msgid "Failed to add iptables rule '%s' to chain '%s' in table '%s': %s"
msgstr ""
#: src/libvirt.c:745
#, fuzzy
msgid "could not parse connection URI"
msgstr "無法連上 %s"
#: src/libvirt.c:763
#, fuzzy
msgid "allocating conn->name"
msgstr "正在分配連線"
#: src/libvirt.c:2180
#, fuzzy
msgid "domainMigratePrepare did not set uri"
msgstr "區域的資訊不正確domid 並非數字型態"
#: src/libvirt.c:2648
msgid "path is NULL"
msgstr ""
#: src/libvirt.c:2654
msgid "flags must be zero"
msgstr ""
#: src/libvirt.c:2661
msgid "buffer is NULL"
msgstr ""
#: src/libvirt.c:2744
msgid "flags parameter must be VIR_MEMORY_VIRTUAL"
msgstr ""
#: src/libvirt.c:2751
msgid "buffer is NULL but size is non-zero"
msgstr ""
#: src/lxc_conf.c:87
msgid "missing filesystem type"
msgstr ""
#: src/lxc_conf.c:93
msgid "invalid filesystem type"
msgstr ""
#: src/lxc_conf.c:115
#, fuzzy
msgid "missing mount source"
msgstr "找不到裝置的來源資訊"
#: src/lxc_conf.c:122
msgid "empty or invalid mount source"
msgstr ""
#: src/lxc_conf.c:131
#, fuzzy
msgid "missing mount target"
msgstr "找不到裝置的目標資訊"
#: src/lxc_conf.c:138
msgid "empty or invalid mount target"
msgstr ""
#: src/lxc_conf.c:179
#, fuzzy
msgid "failed to generate uuid"
msgstr "網路名稱或 uuid"
#: src/lxc_conf.c:185
#, fuzzy
msgid "invalid uuid element"
msgstr "無效的參數,於 "
#: src/lxc_conf.c:247
#, fuzzy
msgid "invalid or missing init element"
msgstr "找不到 root 裝置的資訊"
#: src/lxc_conf.c:253
msgid "init string too long"
msgstr ""
#: src/lxc_conf.c:292
#, fuzzy
msgid "invalid memory value"
msgstr "記憶體大小 %d 不是有效的數值"
#: src/lxc_conf.c:319
#, fuzzy
msgid "invalid root element"
msgstr "找不到 root 裝置的資訊"
#: src/lxc_conf.c:332
#, fuzzy
msgid "missing domain type"
msgstr "找不到區域名稱的資訊"
#: src/lxc_conf.c:338
#, fuzzy
msgid "invalid domain type"
msgstr "無效的區域指標,於 "
#: src/lxc_conf.c:346
#, fuzzy
msgid "invalid domain id"
msgstr "無效的區域指標,於 "
#: src/lxc_conf.c:435
#, c-format
msgid "Can't redefine active VM with name %s"
msgstr ""
#: src/lxc_conf.c:488
#, c-format
msgid "error checking container process: %d %s"
msgstr ""
#: src/lxc_conf.c:548 src/qemu_conf.c:2906 src/qemu_conf.c:3140
#: src/storage_conf.c:1134
#, fuzzy, c-format
msgid "cannot create config file %s: %s"
msgstr "無法寫入設定檔:%s"
#: src/lxc_conf.c:556 src/qemu_conf.c:2914 src/qemu_conf.c:3148
#: src/storage_conf.c:1142
#, fuzzy, c-format
msgid "cannot write config file %s: %s"
msgstr "無法寫入設定檔:%s"
#: src/lxc_conf.c:563 src/qemu_conf.c:2921 src/qemu_conf.c:3155
#: src/storage_conf.c:1149
#, c-format
msgid "cannot save config file %s: %s"
msgstr ""
#: src/lxc_conf.c:590 src/qemu_conf.c:3092 src/qemu_conf.c:3131
#: src/qemu_conf.c:3551 src/storage_conf.c:1091
#, c-format
msgid "cannot create config directory %s: %s"
msgstr ""
#: src/lxc_conf.c:598 src/qemu_conf.c:3100 src/qemu_conf.c:3559
#: src/storage_conf.c:1099
msgid "cannot construct config file path"
msgstr ""
#: src/lxc_conf.c:707
#, fuzzy, c-format
msgid "failed to open config directory %s: %s"
msgstr "無法從 %s 建立網路"
#: src/lxc_conf.c:874 src/qemu_conf.c:4214 src/storage_conf.c:1170
#, fuzzy, c-format
msgid "no config file for %s"
msgstr "設定檔語法錯誤:%s"
#: src/lxc_conf.c:880 src/qemu_conf.c:4220 src/storage_conf.c:1176
#, c-format
msgid "cannot remove config for %s"
msgstr ""
#: src/lxc_conf.c:906 src/lxc_conf.c:984
#, fuzzy, c-format
msgid "cannot create lxc state directory %s: %s"
msgstr "無法寫入設定檔:%s"
#: src/lxc_conf.c:914 src/lxc_conf.c:992
msgid "cannot construct tty pid file path"
msgstr ""
#: src/lxc_conf.c:923
#, fuzzy, c-format
msgid "cannot create tty pid file %s: %s"
msgstr "無法寫入設定檔:%s"
#: src/lxc_conf.c:930
#, fuzzy, c-format
msgid "cannot fdopen tty pid file %s: %s"
msgstr "無法暫停區域 %s"
#: src/lxc_conf.c:935 src/lxc_conf.c:955 src/lxc_conf.c:1018
#, fuzzy, c-format
msgid "failed to close tty pid file %s: %s"
msgstr "無法暫停區域 %s"
#: src/lxc_conf.c:944
#, fuzzy, c-format
msgid "cannot write tty pid file %s: %s"
msgstr "無法寫入設定檔:%s"
#: src/lxc_conf.c:1004
#, fuzzy, c-format
msgid "cannot open tty pid file %s: %s"
msgstr "無法暫停區域 %s"
#: src/lxc_conf.c:1011
#, fuzzy, c-format
msgid "cannot read tty pid file %s: %s"
msgstr "無法寫入設定檔:%s"
#: src/lxc_conf.c:1050
#, fuzzy, c-format
msgid "cannot remove ttyPidFile %s: %s"
msgstr "無法寫入設定檔:%s"
#: src/lxc_container.c:60
#, fuzzy, c-format
msgid "failed to calloc memory for init string: %s"
msgstr "無法分配節點"
#: src/lxc_container.c:70
#, fuzzy, c-format
msgid "execl failed to exec init: %s"
msgstr "無法執行 %s\n"
#: src/lxc_container.c:92
#, fuzzy, c-format
msgid "setsid failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_container.c:99
#, fuzzy, c-format
msgid "open(%s) failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_container.c:105
#, fuzzy, c-format
msgid "ioctl(TIOCSTTY) failed: %s"
msgstr "分配數值陣列"
#: src/lxc_container.c:113
#, fuzzy, c-format
msgid "dup2(stdin) failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_container.c:119
#, fuzzy, c-format
msgid "dup2(stdout) failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_container.c:125
#, fuzzy, c-format
msgid "dup2(stderr) failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_container.c:183
msgid "lxcChild() passed invalid vm definition"
msgstr ""
#: src/lxc_container.c:198
#, fuzzy, c-format
msgid "failed to mount %s at %s for container: %s"
msgstr "無法開啟區域 %s"
#: src/lxc_container.c:208
#, fuzzy, c-format
msgid "failed to mount /proc for container: %s"
msgstr "無法開啟區域 %s"
#: src/lxc_driver.c:316 src/lxc_driver.c:347 src/lxc_driver.c:380
#: src/openvz_driver.c:175 src/openvz_driver.c:217 src/openvz_driver.c:527
#: src/qemu_driver.c:2093 src/qemu_driver.c:2171 src/qemu_driver.c:2698
#: src/qemu_driver.c:2743 src/qemu_driver.c:2781 src/qemu_driver.c:2859
#: src/qemu_driver.c:2912 src/qemu_driver.c:2928 src/qemu_driver.c:3182
#, fuzzy
msgid "no domain with matching uuid"
msgstr "區域 id 或 uuid"
#: src/lxc_driver.c:322 src/openvz_driver.c:532 src/qemu_driver.c:2787
#, fuzzy
msgid "cannot delete active domain"
msgstr "非作用中區域的名稱"
#: src/lxc_driver.c:409
#, fuzzy
msgid "unable to allocate container stack"
msgstr "無法分配節點"
#: src/lxc_driver.c:422
#, fuzzy, c-format
msgid "clone() failed, %s"
msgstr "分配數值陣列"
#: src/lxc_driver.c:520
#, fuzzy
msgid "unable to get storage for vm tty name"
msgstr "區域目前的記憶體"
#: src/lxc_driver.c:564
#, fuzzy, c-format
msgid "posix_openpt failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_driver.c:570
#, fuzzy, c-format
msgid "unlockpt failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_driver.c:576
#, fuzzy, c-format
msgid "ptsname_r failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_driver.c:582
#, fuzzy
msgid "unable to allocate container name string"
msgstr "無法分配節點"
#: src/lxc_driver.c:621
#, fuzzy, c-format
msgid "read of fd %d failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_driver.c:627
#, fuzzy, c-format
msgid "write to fd %d failed: %s"
msgstr "無法暫停區域 %s"
#: src/lxc_driver.c:675
#, fuzzy, c-format
msgid "epoll_create(2) failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_driver.c:686
#, fuzzy, c-format
msgid "epoll_ctl(fd1) failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_driver.c:693
#, fuzzy, c-format
msgid "epoll_ctl(fd2) failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_driver.c:714
#, c-format
msgid "error event %d"
msgstr ""
#: src/lxc_driver.c:735
#, fuzzy, c-format
msgid "epoll_wait() failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_driver.c:795
#, fuzzy, c-format
msgid "unable to fork tty forwarding process: %s"
msgstr "無法開啟要讀取的 %s"
#: src/lxc_driver.c:914 src/lxc_driver.c:1021
#, fuzzy, c-format
msgid "no domain with id %d"
msgstr "區域 id 或 uuid"
#: src/lxc_driver.c:921
#, fuzzy, c-format
msgid "sending SIGTERM failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_driver.c:956
#, fuzzy, c-format
msgid "waitpid failed to wait for container %d: %d %s"
msgstr "無法開啟區域 %s"
#: src/lxc_driver.c:977
#, fuzzy, c-format
msgid "sending SIGKILL to tty process failed: %s"
msgstr "操作失敗:%s"
#: src/lxc_driver.c:989
#, fuzzy, c-format
msgid "waitpid failed to wait for tty %d: %d %s"
msgstr "無法開啟區域 %s"
#: src/lxc_driver.c:1028
#, fuzzy, c-format
msgid "sending SIGKILL failed: %s"
msgstr "操作失敗:%s"
#: src/openvz_conf.c:238
#, c-format
msgid "Error already an active OPENVZ VM having id '%s'"
msgstr ""
#: src/openvz_conf.c:308 src/qemu_conf.c:1632 src/qemu_conf.c:3337
#, fuzzy
msgid "incorrect root element"
msgstr "未知的主機 %s"
#: src/openvz_conf.c:320 src/qemu_conf.c:1647
#, fuzzy
msgid "missing domain type attribute"
msgstr "找不到區域名稱的資訊"
#: src/openvz_conf.c:325 src/qemu_conf.c:1659
#, fuzzy
msgid "invalid domain type attribute"
msgstr "無效的區域指標,於 "
#: src/openvz_conf.c:334
#, fuzzy
msgid "invalid domain name"
msgstr "無效的區域指標,於 "
#: src/openvz_conf.c:341
msgid "VPS ID Error (must be an integer greater than 100"
msgstr ""
#: src/openvz_conf.c:354
#, fuzzy
msgid "Failed to generate UUID"
msgstr "無法讀取插槽 %d\n"
#: src/openvz_conf.c:358 src/qemu_conf.c:1693 src/qemu_conf.c:3377
#: src/storage_conf.c:267
msgid "malformed uuid element"
msgstr ""
#: src/openvz_conf.c:384
#, c-format
msgid "No IP address in the given xml config file '%s'"
msgstr ""
#: src/openvz_conf.c:391
msgid "ipaddress length too long"
msgstr ""
#: src/openvz_conf.c:397
#, fuzzy
msgid "Failed to Create Memory for 'ovz_ip' structure"
msgstr "無法分配節點"
#: src/openvz_conf.c:409
#, c-format
msgid "No Netmask address in the given xml config file '%s'"
msgstr ""
#: src/openvz_conf.c:416
msgid "netmask length too long"
msgstr ""
#: src/openvz_conf.c:428
#, c-format
msgid "No hostname in the given xml config file '%s'"
msgstr ""
#: src/openvz_conf.c:435
msgid "hostname length too long"
msgstr ""
#: src/openvz_conf.c:447
#, c-format
msgid "No Gateway address in the given xml config file '%s'"
msgstr ""
#: src/openvz_conf.c:454
msgid "gateway length too long"
msgstr ""
#: src/openvz_conf.c:466
#, c-format
msgid "No Nameserver address inthe given xml config file '%s'"
msgstr ""
#: src/openvz_conf.c:473
msgid "nameserver length too long"
msgstr ""
#: src/openvz_conf.c:479
#, fuzzy
msgid "Failed to Create Memory for 'ovz_ns' structure"
msgstr "無法分配節點"
#: src/openvz_conf.c:497
msgid "profile length too long"
msgstr ""
#: src/openvz_conf.c:533
#, fuzzy
msgid "popen failed"
msgstr "操作失敗"
#: src/openvz_conf.c:539 src/openvz_conf.c:567
#, fuzzy
msgid "calloc failed"
msgstr "分配數值陣列"
#: src/openvz_conf.c:548
#, fuzzy
msgid "Failed to parse vzlist output"
msgstr "無法暫停區域 %s"
#: src/openvz_conf.c:577
#, fuzzy
msgid "UUID in config file malformed"
msgstr "設定檔語法錯誤:%s"
#: src/openvz_driver.c:147 src/openvz_driver.c:241 src/openvz_driver.c:286
#: src/openvz_driver.c:481
msgid "no domain with matching id"
msgstr ""
#: src/openvz_driver.c:196
#, fuzzy
msgid "no domain with matching name"
msgstr "區域 ID 或名稱"
#: src/openvz_driver.c:247 src/openvz_driver.c:292
#, fuzzy
msgid "domain is not in running state"
msgstr "區域還在執行中"
#: src/openvz_driver.c:254 src/openvz_driver.c:299 src/openvz_driver.c:358
#: src/openvz_driver.c:426 src/openvz_driver.c:442 src/openvz_driver.c:496
#: src/openvz_driver.c:539
msgid "Error in parsing Options to OPENVZ"
msgstr ""
#: src/openvz_driver.c:329
#, c-format
msgid "Already an OPENVZ VM active with the id '%s'"
msgstr ""
#: src/openvz_driver.c:335 src/openvz_driver.c:402
msgid "Error creating OPENVZ VM"
msgstr ""
#: src/openvz_driver.c:397
#, c-format
msgid "Already an OPENVZ VM defined with the id '%d'"
msgstr ""
#: src/openvz_driver.c:487
#, fuzzy
msgid "domain is not in shutoff state"
msgstr "區域還在執行中"
#: src/proxy_internal.c:198
#, c-format
msgid "failed to exec %s\n"
msgstr "無法執行 %s\n"
#: src/proxy_internal.c:292
#, c-format
msgid "Failed to close socket %d\n"
msgstr "無法關閉插槽 %d\n"
#: src/proxy_internal.c:325
#, c-format
msgid "Failed to read socket %d\n"
msgstr "無法讀取插槽 %d\n"
#: src/proxy_internal.c:352
#, c-format
msgid "Failed to write to socket %d\n"
msgstr "無法寫入插槽 %d\n"
#: src/proxy_internal.c:444 src/proxy_internal.c:465 src/proxy_internal.c:485
#, c-format
msgid "Communication error with proxy: got %d bytes of %d\n"
msgstr "使用代理伺服器時通訊錯誤:取得 %d 的位元組(自 %d 處)\n"
#: src/proxy_internal.c:452
#, c-format
msgid "Communication error with proxy: expected %d bytes got %d\n"
msgstr "使用代理伺服器時通訊錯誤:預期 %d 個位元組取得 %d\n"
#: src/proxy_internal.c:474
#, c-format
msgid "Communication error with proxy: got %d bytes packet\n"
msgstr "使用代理伺服器時通訊錯誤:取得 %d 位元組的封包\n"
#: src/proxy_internal.c:498
msgid "Communication error with proxy: malformed packet\n"
msgstr "使用代理伺服器時通訊錯誤:封包格式錯誤\n"
#: src/proxy_internal.c:504
#, c-format
msgid "got asynchronous packet number %d\n"
msgstr "取得非同步的封包號碼 %d\n"
#: src/qemu_conf.c:92 src/qemu_conf.c:127
#, fuzzy
msgid "failed to allocate vncTLSx509certdir"
msgstr "無法分配節點"
#: src/qemu_conf.c:595
#, c-format
msgid "Unexpected exit status from qemu %d pid %lu"
msgstr ""
#: src/qemu_conf.c:604
#, c-format
msgid "Unexpected exit status '%d', qemu probably failed"
msgstr ""
#: src/qemu_conf.c:629 src/qemu_driver.c:869
#, fuzzy, c-format
msgid "Cannot find QEMU binary %s: %s"
msgstr "無法暫停區域 %s"
#: src/qemu_conf.c:730
#, fuzzy, c-format
msgid "Invalid floppy device name: %s"
msgstr "無效的區域指標,於 "
#: src/qemu_conf.c:738
#, fuzzy, c-format
msgid "Invalid cdrom device name: %s"
msgstr "無效的區域指標,於 %s"
#: src/qemu_conf.c:752
#, c-format
msgid "Invalid harddisk device name: %s"
msgstr ""
#: src/qemu_conf.c:773
#, fuzzy, c-format
msgid "Invalid device type: %s"
msgstr "無效的參數,於 %s"
#: src/qemu_conf.c:804
#, fuzzy, c-format
msgid "Invalid bus type: %s"
msgstr "無效的參數,於 %s"
#: src/qemu_conf.c:811
#, c-format
msgid "Invalid bus type '%s' for floppy disk"
msgstr ""
#: src/qemu_conf.c:954
msgid ""
"No <source> 'network' attribute specified with <interface type='network'/>"
msgstr ""
#: src/qemu_conf.c:958
#, fuzzy, c-format
msgid "Network name '%s' too long"
msgstr "網路名稱或 uuid"
#: src/qemu_conf.c:973 src/qemu_conf.c:1001 src/qemu_conf.c:1032
#, c-format
msgid "TAP interface name '%s' is too long"
msgstr ""
#: src/qemu_conf.c:989
#, c-format
msgid "TAP script path '%s' is too long"
msgstr ""
#: src/qemu_conf.c:1015
msgid "No <source> 'dev' attribute specified with <interface type='bridge'/>"
msgstr ""
#: src/qemu_conf.c:1019
#, c-format
msgid "TAP bridge path '%s' is too long"
msgstr ""
#: src/qemu_conf.c:1048
msgid "No <source> 'port' attribute specified with socket interface"
msgstr ""
#: src/qemu_conf.c:1054
msgid "Cannot parse <source> 'port' attribute with socket interface"
msgstr ""
#: src/qemu_conf.c:1064
msgid "No <source> 'address' attribute specified with socket interface"
msgstr ""
#: src/qemu_conf.c:1069
#, c-format
msgid "IP address '%s' is too long"
msgstr ""
#: src/qemu_conf.c:1092
#, fuzzy, c-format
msgid "Model name '%s' is too long"
msgstr "網路名稱或 uuid"
#: src/qemu_conf.c:1099
msgid "Model name contains invalid characters"
msgstr ""
#: src/qemu_conf.c:1273 src/qemu_conf.c:1367 src/xml.c:825 src/xml.c:886
#, fuzzy
msgid "Missing source path attribute for char device"
msgstr "找不到裝置的來源資訊"
#: src/qemu_conf.c:1291 src/qemu_conf.c:1311 src/xml.c:843 src/xml.c:858
#, fuzzy
msgid "Missing source host attribute for char device"
msgstr "找不到裝置的來源資訊"
#: src/qemu_conf.c:1296 src/qemu_conf.c:1316 src/qemu_conf.c:1339
#: src/xml.c:848 src/xml.c:863 src/xml.c:874
#, fuzzy
msgid "Missing source service attribute for char device"
msgstr "找不到裝置的來源資訊"
#: src/qemu_conf.c:1415
#, fuzzy
msgid "too many character devices"
msgstr "過多區域"
#: src/qemu_conf.c:1424 src/qemu_conf.c:2088
#, fuzzy
msgid "failed to allocate space for char device"
msgstr "無法分配節點"
#: src/qemu_conf.c:1465
#, fuzzy
msgid "missing input device type"
msgstr "找不到 root 裝置的資訊"
#: src/qemu_conf.c:1475
#, c-format
msgid "unsupported input device type %s"
msgstr ""
#: src/qemu_conf.c:1485
#, c-format
msgid "ps2 bus does not support %s input device"
msgstr ""
#: src/qemu_conf.c:1494 src/qemu_conf.c:1508
#, c-format
msgid "unsupported input bus %s"
msgstr ""
#: src/qemu_conf.c:1502
#, c-format
msgid "xen bus does not support %s input device"
msgstr ""
#: src/qemu_conf.c:1592
#, fuzzy
msgid "missing sound model"
msgstr "找不到裝置的來源資訊"
#: src/qemu_conf.c:1597
#, fuzzy, c-format
msgid "invalid sound model '%s'"
msgstr "無效的區域指標,於 %s"
#: src/qemu_conf.c:1624 src/qemu_conf.c:1639
#, fuzzy
msgid "failed to allocate space for xmlXPathContext"
msgstr "無法分配節點"
#: src/qemu_conf.c:1674
#, fuzzy
msgid "domain name length too long"
msgstr "區域名稱或 uuid"
#: src/qemu_conf.c:1688 src/qemu_conf.c:3372
#, fuzzy, c-format
msgid "Failed to generate UUID: %s"
msgstr "無法讀取插槽 %d\n"
#: src/qemu_conf.c:1704
#, fuzzy
msgid "missing memory element"
msgstr "找不到 root 裝置的資訊"
#: src/qemu_conf.c:1711 src/qemu_conf.c:1730
#, fuzzy
msgid "malformed memory information"
msgstr "節點資訊"
#: src/qemu_conf.c:1746
#, fuzzy
msgid "malformed vcpu information"
msgstr "區域 vcpu 的資訊"
#: src/qemu_conf.c:1765
#, fuzzy
msgid "malformed vcpu mask information"
msgstr "區域 vcpu 的資訊"
#: src/qemu_conf.c:1825
#, fuzzy
msgid "no OS type"
msgstr "未知的作業系統類型"
#: src/qemu_conf.c:1846 src/qemu_conf.c:1873
msgid "unsupported architecture"
msgstr ""
#: src/qemu_conf.c:1851 src/qemu_conf.c:1858 src/qemu_conf.c:1885
msgid "architecture type too long"
msgstr ""
#: src/qemu_conf.c:1878
msgid "machine type too long"
msgstr ""
#: src/qemu_conf.c:1899
msgid "kernel path too long"
msgstr ""
#: src/qemu_conf.c:1912
msgid "initrd path too long"
msgstr ""
#: src/qemu_conf.c:1925
msgid "cmdline arguments too long"
msgstr ""
#: src/qemu_conf.c:1950
#, fuzzy, c-format
msgid "unknown boot device '%s'"
msgstr "未知的作業系統類型 %s"
#: src/qemu_conf.c:1970
#, fuzzy
msgid "unknown virt type"
msgstr "未知的作業系統類型"
#: src/qemu_conf.c:1979
#, fuzzy
msgid "unsupported guest type"
msgstr "無預期的 mime 類型"
#: src/qemu_conf.c:1986
msgid "emulator path too long"
msgstr ""
#: src/qemu_conf.c:2021
#, c-format
msgid "Unsupported graphics type %s"
msgstr ""
#: src/qemu_conf.c:2037
#, fuzzy
msgid "failed to allocate space for disk string"
msgstr "無法分配節點"
#: src/qemu_conf.c:2112
#, fuzzy
msgid "failed to allocate space for net string"
msgstr "無法分配節點"
#: src/qemu_conf.c:2140 src/qemu_conf.c:2226
#, fuzzy
msgid "failed to allocate space for input string"
msgstr "無法分配節點"
#: src/qemu_conf.c:2177
#, fuzzy
msgid "failed to allocate space for sound dev"
msgstr "無法分配節點"
#: src/qemu_conf.c:2268
#, fuzzy, c-format
msgid "Network '%s' not found"
msgstr "網路名稱或 uuid"
#: src/qemu_conf.c:2273
#, fuzzy, c-format
msgid "Network '%s' not active"
msgstr "網路 %s 已開啟\n"
#: src/qemu_conf.c:2294
#, fuzzy, c-format
msgid "Network type %d is not supported"
msgstr "網路 %s 已開啟\n"
#: src/qemu_conf.c:2300 src/qemu_driver.c:1426
#, fuzzy, c-format
msgid "cannot initialize bridge support: %s"
msgstr "無法暫停區域 %s"
#: src/qemu_conf.c:2308
#, fuzzy, c-format
msgid "Failed to add tap interface '%s' to bridge '%s' : %s"
msgstr "無法暫停區域 %s"
#: src/qemu_conf.c:2330
#, fuzzy
msgid "failed to allocate space for tapfds string"
msgstr "無法分配節點"
#: src/qemu_conf.c:2593 src/qemu_conf.c:2644
#, fuzzy, c-format
msgid "unsupported disk type '%s'"
msgstr "無預期的 mime 類型"
#: src/qemu_conf.c:2843 src/qemu_conf.c:4106
#, fuzzy
msgid "invalid sound model"
msgstr "無效的區域指標,於 "
#: src/qemu_conf.c:2868
#, fuzzy
msgid "failed to allocate space for argv string"
msgstr "無法分配節點"
#: src/qemu_conf.c:2961 src/storage_conf.c:393 src/storage_conf.c:750
#, fuzzy
msgid "missing root element"
msgstr "找不到 root 裝置的資訊"
#: src/qemu_conf.c:2978
#, fuzzy
msgid "unknown device type"
msgstr "未知的作業系統類型"
#: src/qemu_conf.c:3038
#, fuzzy
msgid "failed to allocate space for vm string"
msgstr "無法分配節點"
#: src/qemu_conf.c:3107 src/qemu_conf.c:3566 src/storage_conf.c:1111
msgid "cannot construct autostart link path"
msgstr ""
#: src/qemu_conf.c:3238
#, fuzzy
msgid "failed to allocate space for range string"
msgstr "無法分配節點"
#: src/qemu_conf.c:3329
#, fuzzy
msgid "failed to allocate space for network_def string"
msgstr "無法分配節點"
#: src/qemu_conf.c:3344
#, fuzzy
msgid "failed to allocate space for xmlXPathContext string"
msgstr "無法分配節點"
#: src/qemu_conf.c:3358
#, fuzzy
msgid "network name length too long"
msgstr "網路名稱或 uuid"
#: src/qemu_conf.c:3409
msgid "Forwarding requested, but no IPv4 address/netmask provided"
msgstr ""
#: src/qemu_conf.c:3431
#, c-format
msgid "forward device name '%s' is too long"
msgstr ""
#: src/qemu_conf.c:3503
#, fuzzy
msgid "failed to allocate space for network string"
msgstr "無法分配節點"
#: src/qemu_conf.c:3587
#, c-format
msgid "Error parsing QEMU guest config '%s' : %s"
msgstr ""
#: src/qemu_conf.c:3589
msgid "BUG: unknown error - please report it\n"
msgstr ""
#: src/qemu_conf.c:3595
#, c-format
msgid "QEMU guest config filename '%s' does not match guest name '%s'"
msgstr ""
#: src/qemu_conf.c:3604
#, c-format
msgid "Failed to load QEMU guest config '%s': out of memory"
msgstr ""
#: src/qemu_conf.c:3632
#, c-format
msgid "Error parsing network config '%s' : %s"
msgstr ""
#: src/qemu_conf.c:3639
#, c-format
msgid "Network config filename '%s' does not match network name '%s'"
msgstr ""
#: src/qemu_conf.c:3648
#, fuzzy, c-format
msgid "Failed to load network config '%s': out of memory"
msgstr "無法將網路加入至連線雜湊表"
#: src/qemu_conf.c:3675
#, fuzzy, c-format
msgid "Failed to open dir '%s': %s"
msgstr "無法暫停區域 %s"
#: src/qemu_conf.c:3692
#, c-format
msgid "Config filename '%s/%s' is too long"
msgstr ""
#: src/qemu_conf.c:3699
#, c-format
msgid "Autostart link path '%s/%s' is too long"
msgstr ""
#: src/qemu_conf.c:3853
#, fuzzy, c-format
msgid "unexpected domain type %d"
msgstr "無預期的 mime 類型"
#: src/qemu_conf.c:3881
#, fuzzy
msgid "allocating cpu mask"
msgstr "分配區域"
#: src/qemu_conf.c:4123 src/qemu_conf.c:4201
#, fuzzy
msgid "failed to generate XML: out of memory"
msgstr "無法讀取插槽 %d\n"
#: src/qemu_driver.c:149
#, fuzzy, c-format
msgid "Failed to autostart network '%s': %s"
msgstr "無法開啟網路 %s"
#: src/qemu_driver.c:164
#, fuzzy, c-format
msgid "Failed to autostart VM '%s': %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:208
#, fuzzy
msgid "out of memory in asprintf"
msgstr "記憶體不足"
#: src/qemu_driver.c:253
msgid "Resulting path to long for buffer in qemudInitPaths()"
msgstr ""
#: src/qemu_driver.c:258
#, fuzzy
msgid "qemudStartup: out of memory"
msgstr "記憶體不足"
#: src/qemu_driver.c:276
msgid "Reloading iptables rules"
msgstr ""
#: src/qemu_driver.c:407
#, c-format
msgid ""
"QEMU quit during %s startup\n"
"%s"
msgstr ""
#: src/qemu_driver.c:417 src/qemu_driver.c:430
#, c-format
msgid "Failure while reading %s startup output: %s"
msgstr ""
#: src/qemu_driver.c:425
#, c-format
msgid "Timed out while reading %s startup output"
msgstr ""
#: src/qemu_driver.c:441
#, c-format
msgid "Failure while reading %s startup output"
msgstr ""
#: src/qemu_driver.c:453
#, c-format
msgid "Out of space while reading %s startup output"
msgstr ""
#: src/qemu_driver.c:484
#, fuzzy, c-format
msgid "Unable to open monitor path %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:489
msgid "Unable to set monitor close-on-exec flag"
msgstr ""
#: src/qemu_driver.c:494
msgid "Unable to put monitor into non-blocking mode"
msgstr ""
#: src/qemu_driver.c:612 src/qemu_driver.c:959 src/qemu_driver.c:1658
#: src/qemu_driver.c:1668
#, c-format
msgid "Unable to log VM console data: %s"
msgstr ""
#: src/qemu_driver.c:635
#, fuzzy
msgid "allocate cpumap"
msgstr "分配新的內文"
#: src/qemu_driver.c:646
msgid "cannot run monitor command to fetch CPU thread info"
msgstr ""
#: src/qemu_driver.c:745
#, fuzzy, c-format
msgid "failed to set CPU affinity %s"
msgstr "無法取得區域「%s」"
#: src/qemu_driver.c:755 src/qemu_driver.c:2037
#, fuzzy
msgid "resume operation failed"
msgstr "操作失敗"
#: src/qemu_driver.c:810
#, fuzzy
msgid "VM is already active"
msgstr "區域已經啟動"
#: src/qemu_driver.c:818
msgid "Unable to find an unused VNC port"
msgstr ""
#: src/qemu_driver.c:831
#, c-format
msgid "config file path too long: %s/%s.log"
msgstr ""
#: src/qemu_driver.c:842
#, fuzzy, c-format
msgid "cannot create log directory %s: %s"
msgstr "無法寫入設定檔:%s"
#: src/qemu_driver.c:850
#, fuzzy, c-format
msgid "failed to create logfile %s: %s"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:856
#, fuzzy, c-format
msgid "Unable to set VM logfile close-on-exec flag %s"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:885 src/qemu_driver.c:888 src/qemu_driver.c:893
#, fuzzy, c-format
msgid "Unable to write argv to logfile %d: %s"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:973
#, c-format
msgid "Shutting down VM '%s'"
msgstr ""
#: src/qemu_driver.c:984
#, fuzzy, c-format
msgid "Unable to close logfile %d: %s"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:999
#, fuzzy
msgid "Got unexpected pid, damn"
msgstr "無預期的 dict 節點"
#: src/qemu_driver.c:1130
#, fuzzy
msgid "failed to allocate space for dnsmasq argv"
msgstr "無法分配節點"
#: src/qemu_driver.c:1144
msgid "cannot start dhcp daemon without IP address for server"
msgstr ""
#: src/qemu_driver.c:1172
#, fuzzy, c-format
msgid "failed to add iptables rule to allow forwarding from '%s' : %s\n"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:1183
#, fuzzy, c-format
msgid "failed to add iptables rule to allow forwarding to '%s' : %s\n"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:1193
#, fuzzy, c-format
msgid "failed to add iptables rule to enable masquerading : %s\n"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:1225
#, fuzzy, c-format
msgid "failed to add iptables rule to allow routing from '%s' : %s\n"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:1236
#, fuzzy, c-format
msgid "failed to add iptables rule to allow routing to '%s' : %s\n"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:1261
#, fuzzy
msgid "failed to allocate space for IP tables support"
msgstr "無法分配節點"
#: src/qemu_driver.c:1269 src/qemu_driver.c:1276
#, fuzzy, c-format
msgid "failed to add iptables rule to allow DHCP requests from '%s' : %s"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:1284 src/qemu_driver.c:1291
#, fuzzy, c-format
msgid "failed to add iptables rule to allow DNS requests from '%s' : %s"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:1301
#, fuzzy, c-format
msgid "failed to add iptables rule to block outbound traffic from '%s' : %s"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:1308
#, fuzzy, c-format
msgid "failed to add iptables rule to block inbound traffic to '%s' : %s"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:1316
#, fuzzy, c-format
msgid "failed to add iptables rule to allow cross bridge traffic on '%s' : %s"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:1420
#, fuzzy
msgid "network is already active"
msgstr "區域已經啟動"
#: src/qemu_driver.c:1439
#, fuzzy, c-format
msgid "cannot create bridge '%s' : %s"
msgstr "無法寫入設定檔:%s"
#: src/qemu_driver.c:1447
#, fuzzy, c-format
msgid "failed to set bridge forward delay to %d"
msgstr "無法取得節點資訊"
#: src/qemu_driver.c:1454
#, fuzzy, c-format
msgid "failed to set bridge STP to %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:1462
#, fuzzy, c-format
msgid "cannot set IP address on bridge '%s' to '%s' : %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:1470
#, fuzzy, c-format
msgid "cannot set netmask on bridge '%s' to '%s' : %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:1478
#, fuzzy, c-format
msgid "failed to bring the bridge '%s' up : %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:1489
#, fuzzy, c-format
msgid "failed to enable IP forwarding : %s"
msgstr "無法開啟要讀取的 %s"
#: src/qemu_driver.c:1510 src/qemu_driver.c:1541
#, fuzzy, c-format
msgid "Failed to bring down bridge '%s' : %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:1516 src/qemu_driver.c:1546
#, fuzzy, c-format
msgid "Failed to delete bridge '%s' : %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:1529
#, fuzzy, c-format
msgid "Shutting down network '%s'"
msgstr "無法取得網路「%s」"
#: src/qemu_driver.c:1555
#, fuzzy
msgid "Got unexpected pid for dnsmasq"
msgstr "無預期的 dict 節點"
#: src/qemu_driver.c:1755
#, fuzzy, c-format
msgid "unknown type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/qemu_driver.c:1771
#, fuzzy
msgid "failed to allocate space for capabilities support"
msgstr "無法分配節點"
#: src/qemu_driver.c:1790 src/qemu_driver.c:1816
msgid "NUMA not supported on this host"
msgstr ""
#: src/qemu_driver.c:1801 src/qemu_driver.c:1824
#, fuzzy
msgid "Failed to query NUMA free memory"
msgstr "已使用的記憶體:"
#: src/qemu_driver.c:1996 src/qemu_driver.c:2025 src/qemu_driver.c:2054
#: src/qemu_driver.c:2074 src/qemu_driver.c:2302 src/qemu_driver.c:2986
#: src/qemu_driver.c:3121 src/qemu_driver.c:3246
#, c-format
msgid "no domain with matching id %d"
msgstr ""
#: src/qemu_driver.c:2001 src/qemu_driver.c:2030 src/qemu_driver.c:2308
#: src/qemu_driver.c:2991 src/qemu_driver.c:3127 src/qemu_driver.c:3252
#, fuzzy
msgid "domain is not running"
msgstr "區域還在執行中"
#: src/qemu_driver.c:2009
#, fuzzy
msgid "suspend operation failed"
msgstr "操作失敗"
#: src/qemu_driver.c:2060
#, fuzzy
msgid "shutdown operation failed"
msgstr "操作失敗"
#: src/qemu_driver.c:2099
#, fuzzy
msgid "failed to allocate space for ostype"
msgstr "無法分配節點"
#: src/qemu_driver.c:2112 src/qemu_driver.c:2125 src/qemu_driver.c:2145
#: src/qemu_driver.c:2401 src/qemu_driver.c:2560
#, c-format
msgid "no domain with matching uuid '%s'"
msgstr ""
#: src/qemu_driver.c:2131
msgid "cannot set max memory lower than current memory"
msgstr ""
#: src/qemu_driver.c:2151
#, fuzzy
msgid "cannot set memory of an active domain"
msgstr "非作用中區域的名稱"
#: src/qemu_driver.c:2157
msgid "cannot set memory higher than max memory"
msgstr ""
#: src/qemu_driver.c:2317
#, fuzzy
msgid "failed to pause domain"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:2326
#, fuzzy
msgid "failed to get domain xml"
msgstr "無法取得區域 UUID"
#: src/qemu_driver.c:2334
#, fuzzy, c-format
msgid "failed to create '%s'"
msgstr "無法讀取插槽 %d\n"
#: src/qemu_driver.c:2341
#, fuzzy
msgid "failed to write save header"
msgstr "無法寫入插槽 %d\n"
#: src/qemu_driver.c:2349
#, fuzzy
msgid "failed to write xml"
msgstr "無法寫入插槽 %d\n"
#: src/qemu_driver.c:2362 src/qemu_driver.c:2369 src/qemu_driver.c:2620
#: src/qemu_driver.c:2817 src/qemu_driver.c:2825 src/qemu_driver.c:2833
#: src/remote_internal.c:2279 src/virterror.c:435
msgid "out of memory"
msgstr "記憶體不足"
#: src/qemu_driver.c:2377
#, fuzzy
msgid "migrate operation failed"
msgstr "操作失敗"
#: src/qemu_driver.c:2407
#, fuzzy
msgid "cannot change vcpu count of an active domain"
msgstr "非作用中區域的名稱"
#: src/qemu_driver.c:2413
msgid "could not determine max vcpus for the domain"
msgstr ""
#: src/qemu_driver.c:2419
#, c-format
msgid ""
"requested vcpus is greater than max allowable vcpus for the domain: %d > %d"
msgstr ""
#: src/qemu_driver.c:2443 src/qemu_driver.c:2495
#, fuzzy
msgid "cannot pin vcpus on an inactive domain"
msgstr "取消定義非作用中的區域"
#: src/qemu_driver.c:2449
#, c-format
msgid "vcpu number out of range %d > %d"
msgstr ""
#: src/qemu_driver.c:2470
#, fuzzy, c-format
msgid "cannot set affinity: %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:2475
#, fuzzy
msgid "cpu affinity is not supported"
msgstr "呼叫函式庫失敗,可能並不支援"
#: src/qemu_driver.c:2532
#, fuzzy, c-format
msgid "cannot get affinity: %s"
msgstr "無法讀取插槽 %d\n"
#: src/qemu_driver.c:2542
msgid "cpu affinity is not available"
msgstr ""
#: src/qemu_driver.c:2566
#, fuzzy, c-format
msgid "unknown virt type in domain definition '%d'"
msgstr "載入區域定義檔"
#: src/qemu_driver.c:2592 src/test.c:1398
#, fuzzy
msgid "cannot read domain image"
msgstr "節點的區域清單"
#: src/qemu_driver.c:2598
#, fuzzy
msgid "failed to read qemu header"
msgstr "無法從 Xen 系統程式讀取"
#: src/qemu_driver.c:2605
msgid "image magic is incorrect"
msgstr ""
#: src/qemu_driver.c:2612
#, c-format
msgid "image version is not supported (%d > %d)"
msgstr ""
#: src/qemu_driver.c:2627
#, fuzzy
msgid "failed to read XML"
msgstr "無法讀取插槽 %d\n"
#: src/qemu_driver.c:2636
#, fuzzy
msgid "failed to parse XML"
msgstr "無法讀取插槽 %d\n"
#: src/qemu_driver.c:2648
#, fuzzy, c-format
msgid "domain is already active as '%s'"
msgstr "區域已經啟動"
#: src/qemu_driver.c:2655
#, fuzzy
msgid "failed to assign new VM"
msgstr "無法讀取插槽 %d\n"
#: src/qemu_driver.c:2670
#, fuzzy
msgid "failed to start VM"
msgstr "無法開啟區域 %s"
#: src/qemu_driver.c:2681
#, fuzzy
msgid "failed to resume domain"
msgstr "無法繼續區域 %s"
#: src/qemu_driver.c:2715 src/qemu_driver.c:3348 src/qemu_driver.c:3376
#, fuzzy
msgid "failed to allocate space for VM name string"
msgstr "無法分配節點"
#: src/qemu_driver.c:2795 src/qemu_driver.c:3451
#, fuzzy, c-format
msgid "Failed to delete autostart link '%s': %s"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:2839
msgid "cannot change cdrom media"
msgstr ""
#: src/qemu_driver.c:2865
#, fuzzy
msgid "cannot attach device on inactive domain"
msgstr "取消定義非作用中的區域"
#: src/qemu_driver.c:2876
msgid "only CDROM disk devices can be attached"
msgstr ""
#: src/qemu_driver.c:2891
msgid "CDROM not attached, cannot change media"
msgstr ""
#: src/qemu_driver.c:2942 src/qemu_driver.c:3560 src/storage_driver.c:792
#, c-format
msgid "cannot create autostart directory %s: %s"
msgstr ""
#: src/qemu_driver.c:2949 src/qemu_driver.c:3567 src/storage_driver.c:799
#, fuzzy, c-format
msgid "Failed to create symlink '%s' to '%s': %s"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:2956 src/qemu_driver.c:3574 src/storage_driver.c:808
#, fuzzy, c-format
msgid "Failed to delete symlink '%s': %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:3013
#, fuzzy, c-format
msgid "invalid path: %s"
msgstr "無效的參數,於 %s"
#: src/qemu_driver.c:3021 src/qemu_driver.c:3267
msgid "'info blockstats' command failed"
msgstr ""
#: src/qemu_driver.c:3036
msgid "'info blockstats' not supported by this qemu"
msgstr ""
#: src/qemu_driver.c:3101
#, fuzzy, c-format
msgid "device not found: %s (%s)"
msgstr "從 %s 回復區域\n"
#: src/qemu_driver.c:3133 src/qemu_driver.c:3188
msgid "NULL or empty path"
msgstr ""
#: src/qemu_driver.c:3156
#, c-format
msgid "invalid path, '%s' is not a known interface"
msgstr ""
#: src/qemu_driver.c:3197
#, fuzzy
msgid "invalid path"
msgstr "無效的參數,於 %s"
#: src/qemu_driver.c:3240
msgid "QEMU driver only supports virtual memory addrs"
msgstr ""
#: src/qemu_driver.c:3296 src/qemu_driver.c:3443 src/qemu_driver.c:3468
#: src/qemu_driver.c:3482 src/qemu_driver.c:3497 src/qemu_driver.c:3530
#: src/qemu_driver.c:3546
msgid "no network with matching uuid"
msgstr ""
#: src/qemu_driver.c:3311
msgid "no network with matching name"
msgstr ""
#: src/qemu_driver.c:3510
#, fuzzy
msgid "no network with matching id"
msgstr "XML 格式的網路資訊"
#: src/qemu_driver.c:3517
#, fuzzy
msgid "failed to allocate space for network bridge string"
msgstr "無法分配節點"
#: src/remote_internal.c:108 src/remote_internal.c:116
msgid "tried to use a closed or uninitialised handle"
msgstr ""
#: src/remote_internal.c:225
#, fuzzy
msgid "failed to find libvirtd binary"
msgstr "無法為網路 %s 取消定義"
#: src/remote_internal.c:332
msgid ""
"remote_open: transport in URL not recognised (should be tls|unix|ssh|ext|tcp)"
msgstr ""
#: src/remote_internal.c:373
#, fuzzy
msgid "allocating priv->hostname"
msgstr "分配數值陣列"
#: src/remote_internal.c:455
msgid "remote_open: for 'ext' transport, command is required"
msgstr ""
#: src/remote_internal.c:728
msgid "transport methods unix, ssh and ext are not supported under Windows"
msgstr ""
#: src/remote_internal.c:771
msgid "uri params"
msgstr ""
#: src/remote_internal.c:814 src/remote_internal.c:2492
#: src/remote_internal.c:2898
#, fuzzy
msgid "struct private_data"
msgstr "分配數值陣列"
#: src/remote_internal.c:1024
msgid "server verification (of our certificate or IP address) failed\n"
msgstr ""
#: src/remote_internal.c:1079
msgid "Certificate type is not X.509"
msgstr ""
#: src/remote_internal.c:1084
msgid "gnutls_certificate_get_peers failed"
msgstr ""
#: src/remote_internal.c:1105
msgid "The certificate has expired"
msgstr ""
#: src/remote_internal.c:1111
msgid "The certificate is not yet activated"
msgstr ""
#: src/remote_internal.c:1123
#, c-format
msgid "Certificate's owner does not match the hostname (%s)"
msgstr ""
#: src/remote_internal.c:1342
#, fuzzy, c-format
msgid "too many NUMA cells: %d > %d"
msgstr "過多連線"
#: src/remote_internal.c:1391 src/remote_internal.c:1405
#, fuzzy, c-format
msgid "too many remote domain IDs: %d > %d"
msgstr "過多區域"
#: src/remote_internal.c:1779
#, c-format
msgid "map length greater than maximum: %d > %d"
msgstr ""
#: src/remote_internal.c:1811
#, c-format
msgid "vCPU count exceeds maximum: %d > %d"
msgstr ""
#: src/remote_internal.c:1817
#, c-format
msgid "vCPU map buffer length exceeds maximum: %d > %d"
msgstr ""
#: src/remote_internal.c:1834
#, c-format
msgid "host reports too many vCPUs: %d > %d"
msgstr ""
#: src/remote_internal.c:1841
#, c-format
msgid "host reports map buffer length exceeds maximum: %d > %d"
msgstr ""
#: src/remote_internal.c:2003 src/remote_internal.c:2017
#, fuzzy, c-format
msgid "too many remote domain names: %d > %d"
msgstr "過多區域"
#: src/remote_internal.c:2219
msgid ""
"remoteDomainGetSchedulerParameters: returned number of parameters exceeds "
"limit"
msgstr ""
#: src/remote_internal.c:2247
msgid "remoteDomainGetSchedulerParameters: unknown parameter type"
msgstr ""
#: src/remote_internal.c:2270
#, fuzzy
msgid "out of memory allocating array"
msgstr "改變記憶體分配"
#: src/remote_internal.c:2297
#, fuzzy
msgid "unknown parameter type"
msgstr "未知的作業系統類型"
#: src/remote_internal.c:2387
#, c-format
msgid "block peek request too large for remote protocol, %zi > %d"
msgstr ""
#: src/remote_internal.c:2408 src/remote_internal.c:2452
msgid "returned buffer is not same size as requested"
msgstr ""
#: src/remote_internal.c:2432
#, c-format
msgid "memory peek request too large for remote protocol, %zi > %d"
msgstr ""
#: src/remote_internal.c:2555 src/remote_internal.c:2569
#: src/remote_internal.c:2614 src/remote_internal.c:2628
#, fuzzy, c-format
msgid "too many remote networks: %d > %d"
msgstr "過多連線"
#: src/remote_internal.c:2960 src/remote_internal.c:3015
#, fuzzy
msgid "too many storage pools requested"
msgstr "註冊太多驅動程式"
#: src/remote_internal.c:2972 src/remote_internal.c:3027
#, fuzzy
msgid "too many storage pools received"
msgstr "註冊太多驅動程式"
#: src/remote_internal.c:3372
#, fuzzy
msgid "too many storage volumes requested"
msgstr "註冊太多驅動程式"
#: src/remote_internal.c:3385
#, fuzzy
msgid "too many storage volumes received"
msgstr "註冊太多驅動程式"
#: src/remote_internal.c:3621
#, fuzzy, c-format
msgid "unknown authentication type %s"
msgstr "未知的作業系統類型 %s"
#: src/remote_internal.c:3631
#, c-format
msgid "requested authentication type %s rejected"
msgstr ""
#: src/remote_internal.c:3672
#, fuzzy, c-format
msgid "unsupported authentication type %d"
msgstr "操作失敗"
#: src/remote_internal.c:3920
#, fuzzy, c-format
msgid "failed to initialize SASL library: %d (%s)"
msgstr "無法為網路 %s 取消定義"
#: src/remote_internal.c:3968
#, fuzzy, c-format
msgid "Failed to create SASL client context: %d (%s)"
msgstr "無法建立非運作中的區域 %s\n"
#: src/remote_internal.c:3981
msgid "invalid cipher size for TLS session"
msgstr ""
#: src/remote_internal.c:3991
#, fuzzy, c-format
msgid "cannot set external SSF %d (%s)"
msgstr "無法暫停區域 %s"
#: src/remote_internal.c:4010
#, fuzzy, c-format
msgid "cannot set security props %d (%s)"
msgstr "無法暫停區域 %s"
#: src/remote_internal.c:4029
#, fuzzy, c-format
msgid "SASL mechanism %s not supported by server"
msgstr "不支援 hypervisor"
#: src/remote_internal.c:4048
#, fuzzy, c-format
msgid "Failed to start SASL negotiation: %d (%s)"
msgstr "無法開啟區域 %s"
#: src/remote_internal.c:4066 src/remote_internal.c:4144
#, fuzzy
msgid "Failed to make auth credentials"
msgstr "無法取得節點資訊"
#: src/remote_internal.c:4090
#, c-format
msgid "SASL negotiation data too long: %d bytes"
msgstr ""
#: src/remote_internal.c:4130
#, fuzzy, c-format
msgid "Failed SASL step: %d (%s)"
msgstr "無法暫停區域 %s"
#: src/remote_internal.c:4216
#, c-format
msgid "negotiation SSF %d was not strong enough"
msgstr ""
#: src/remote_internal.c:4270
#, fuzzy
msgid "Failed to collect auth credentials"
msgstr "無法取得節點資訊"
#: src/remote_internal.c:4337
msgid "xdr_remote_message_header failed"
msgstr ""
#: src/remote_internal.c:4343
msgid "marshalling args"
msgstr ""
#: src/remote_internal.c:4360
msgid "xdr_int (length word)"
msgstr ""
#: src/remote_internal.c:4377
msgid "xdr_int (length word, reply)"
msgstr ""
#: src/remote_internal.c:4387
msgid "packet received from server too large"
msgstr ""
#: src/remote_internal.c:4399
#, fuzzy
msgid "invalid header in reply"
msgstr "無效的參數,於 %s"
#: src/remote_internal.c:4408
#, c-format
msgid "unknown program (received %x, expected %x)"
msgstr ""
#: src/remote_internal.c:4416
#, c-format
msgid "unknown protocol version (received %x, expected %x)"
msgstr ""
#: src/remote_internal.c:4429
#, c-format
msgid "unknown procedure (received %x, expected %x)"
msgstr ""
#: src/remote_internal.c:4437
#, c-format
msgid "unknown direction (received %x, expected %x)"
msgstr ""
#: src/remote_internal.c:4444
#, c-format
msgid "unknown serial (received %x, expected %x)"
msgstr ""
#: src/remote_internal.c:4457
msgid "unmarshalling ret"
msgstr ""
#: src/remote_internal.c:4467
msgid "unmarshalling remote_error"
msgstr ""
#: src/remote_internal.c:4487
#, c-format
msgid "unknown status (received %x)"
msgstr ""
#: src/remote_internal.c:4596 src/remote_internal.c:4613
msgid "socket closed unexpectedly"
msgstr ""
#: src/sexpr.c:60
msgid "failed to allocate a node"
msgstr "無法分配節點"
#: src/sexpr.c:364 src/sexpr.c:381
msgid "failed to copy a string"
msgstr "無法複製字串"
#: src/storage_backend.c:84
#, c-format
msgid "missing backend for pool type %d"
msgstr ""
#: src/storage_backend.c:129
#, fuzzy, c-format
msgid "unknown storage backend type %s"
msgstr "未知的作業系統類型 %s"
#: src/storage_backend.c:159
#, fuzzy, c-format
msgid "unknown storage backend type %d"
msgstr "未知的作業系統類型 %s"
#: src/storage_backend.c:173 src/storage_backend_fs.c:341
#, fuzzy, c-format
msgid "cannot open volume '%s': %s"
msgstr "無法暫停區域 %s"
#: src/storage_backend.c:201
#, c-format
msgid "cannot stat file '%s': %s"
msgstr ""
#: src/storage_backend.c:229
#, c-format
msgid "cannot seek to end of file '%s':%s"
msgstr ""
#: src/storage_backend.c:247
#, c-format
msgid "cannot get file context of %s: %s"
msgstr ""
#: src/storage_backend.c:256
msgid "context"
msgstr ""
#: src/storage_backend.c:302
#, c-format
msgid "cannot read dir %s: %s"
msgstr ""
#: src/storage_backend.c:315 src/storage_driver.c:1197
msgid "path"
msgstr ""
#: src/storage_backend.c:369
msgid "regex"
msgstr ""
#: src/storage_backend.c:379
#, fuzzy, c-format
msgid "Failed to compile regex %s"
msgstr "無法暫停區域 %s"
#: src/storage_backend.c:395 src/storage_backend.c:400
#: src/storage_backend.c:436
msgid "regex groups"
msgstr ""
#: src/storage_backend.c:412 src/storage_backend.c:548
msgid "cannot read fd"
msgstr ""
#: src/storage_backend.c:486 src/storage_backend.c:603
#, fuzzy, c-format
msgid "failed to wait for command: %s"
msgstr "無法開啟區域 %s"
#: src/storage_backend.c:495 src/storage_backend.c:616
msgid "command did not exit cleanly"
msgstr ""
#: src/storage_backend.c:535
msgid "n_columns too large"
msgstr ""
#: src/storage_backend.c:582
#, fuzzy, c-format
msgid "read error: %s"
msgstr "內部錯誤 %s"
#: src/storage_backend.c:610
#, c-format
msgid "non-zero exit status from command %d"
msgstr ""
#: src/storage_backend_disk.c:85 src/storage_backend_logical.c:57
#, c-format
msgid "unsupported pool format %s"
msgstr ""
#: src/storage_backend_disk.c:110 src/storage_backend_logical.c:70
#, c-format
msgid "unsupported pool format %d"
msgstr ""
#: src/storage_backend_disk.c:138 src/storage_backend_fs.c:187
#: src/storage_backend_fs.c:257 src/storage_backend_fs.c:309
#, c-format
msgid "unsupported volume format %s"
msgstr ""
#: src/storage_backend_disk.c:165 src/storage_backend_fs.c:220
#: src/storage_backend_fs.c:292 src/storage_backend_fs.c:324
#, c-format
msgid "unsupported volume format %d"
msgstr ""
#: src/storage_backend_disk.c:179 src/storage_backend_disk.c:192
#: src/storage_backend_disk.c:199 src/storage_backend_disk.c:221
#: src/storage_backend_fs.c:685 src/storage_backend_iscsi.c:177
#: src/storage_backend_logical.c:116 src/storage_backend_logical.c:121
#: src/storage_backend_logical.c:133 src/storage_backend_logical.c:143
msgid "volume"
msgstr ""
#: src/storage_backend_disk.c:229
msgid "volume extents"
msgstr ""
#: src/storage_backend_disk.c:237
msgid "cannot parse device start location"
msgstr ""
#: src/storage_backend_disk.c:244
msgid "cannot parse device end location"
msgstr ""
#: src/storage_backend_disk.c:250 src/storage_backend_logical.c:154
#: src/storage_backend_logical.c:160
msgid "extents"
msgstr ""
#: src/storage_backend_disk.c:461
msgid "no large enough free extent"
msgstr ""
#: src/storage_backend_disk.c:495
msgid "Disk pools are not yet supported"
msgstr ""
#: src/storage_backend_fs.c:353
#, c-format
msgid "cannot read header '%s': %s"
msgstr ""
#: src/storage_backend_fs.c:461
#, c-format
msgid "cannot read %s: %s"
msgstr ""
#: src/storage_backend_fs.c:507 src/storage_backend_fs.c:574
#: src/storage_backend_iscsi.c:573
#, fuzzy
msgid "missing source host"
msgstr "找不到裝置的來源資訊"
#: src/storage_backend_fs.c:512 src/storage_conf.c:319
#, fuzzy
msgid "missing source path"
msgstr "找不到裝置的來源資訊"
#: src/storage_backend_fs.c:518 src/storage_backend_fs.c:585
#: src/storage_backend_iscsi.c:580
#, fuzzy
msgid "missing source device"
msgstr "找不到裝置的來源資訊"
#: src/storage_backend_fs.c:534 src/storage_backend_fs.c:542
msgid "source"
msgstr ""
#: src/storage_backend_fs.c:579
#, fuzzy
msgid "missing source dir"
msgstr "找不到裝置的來源資訊"
#: src/storage_backend_fs.c:651 src/storage_backend_fs.c:842
#: src/storage_backend_fs.c:881
#, c-format
msgid "cannot create path '%s': %s"
msgstr ""
#: src/storage_backend_fs.c:674
#, fuzzy, c-format
msgid "cannot open path '%s': %s"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:693 src/storage_backend_fs.c:703
#, fuzzy
msgid "volume name"
msgstr "區域名稱"
#: src/storage_backend_fs.c:714
msgid "volume key"
msgstr ""
#: src/storage_backend_fs.c:741
#, c-format
msgid "cannot statvfs path '%s': %s"
msgstr ""
#: src/storage_backend_fs.c:802
#, c-format
msgid "cannot unlink path '%s': %s"
msgstr ""
#: src/storage_backend_fs.c:825
msgid "target"
msgstr ""
#: src/storage_backend_fs.c:834
msgid "storage vol key"
msgstr ""
#: src/storage_backend_fs.c:859
#, c-format
msgid "cannot fill file '%s': %s"
msgstr ""
#: src/storage_backend_fs.c:872
#, c-format
msgid "cannot extend file '%s': %s"
msgstr ""
#: src/storage_backend_fs.c:888 src/storage_backend_fs.c:924
#: src/storage_backend_fs.c:959 src/storage_backend_logical.c:457
#, c-format
msgid "cannot read path '%s': %s"
msgstr ""
#: src/storage_backend_fs.c:901
#, fuzzy, c-format
msgid "unknown storage vol type %d"
msgstr "未知的作業系統類型 %s"
#: src/storage_backend_fs.c:939
#, c-format
msgid "unsupported storage vol type %d"
msgstr ""
#: src/storage_backend_fs.c:966
msgid "creation of non-raw images is not supported without qemu-img"
msgstr ""
#: src/storage_backend_fs.c:976 src/storage_backend_logical.c:466
#, fuzzy, c-format
msgid "cannot set file owner '%s': %s"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:985 src/storage_backend_logical.c:473
#, fuzzy, c-format
msgid "cannot set file mode '%s': %s"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:1001 src/storage_backend_logical.c:480
#, c-format
msgid "cannot close file '%s': %s"
msgstr ""
#: src/storage_backend_fs.c:1024
#, c-format
msgid "cannot unlink file '%s': %s"
msgstr ""
#: src/storage_backend_iscsi.c:61
#, fuzzy, c-format
msgid "host lookup failed %s"
msgstr "操作失敗:%s"
#: src/storage_backend_iscsi.c:68
#, c-format
msgid "no IP address for target %s"
msgstr ""
#: src/storage_backend_iscsi.c:77
#, c-format
msgid "cannot format ip addr for %s"
msgstr ""
#: src/storage_backend_iscsi.c:97
#, fuzzy
msgid "session"
msgstr "顯示版本"
#: src/storage_backend_iscsi.c:143
msgid "cannot find session"
msgstr ""
#: src/storage_backend_iscsi.c:182 src/storage_driver.c:869
#, fuzzy
msgid "name"
msgstr "名稱"
#: src/storage_backend_iscsi.c:187
msgid "devpath"
msgstr ""
#: src/storage_backend_iscsi.c:206 src/util.c:113
#, fuzzy, c-format
msgid "cannot open %s: %s"
msgstr "無法暫停區域 %s"
#: src/storage_backend_iscsi.c:231
msgid "key"
msgstr ""
#: src/storage_backend_iscsi.c:322 src/storage_backend_iscsi.c:407
#: src/storage_backend_iscsi.c:443
#, fuzzy, c-format
msgid "Failed to opendir sysfs path %s: %s"
msgstr "無法暫停區域 %s"
#: src/storage_backend_iscsi.c:335
#, fuzzy, c-format
msgid "Failed to parse target from sysfs path %s/%s"
msgstr "無法暫停區域 %s"
#: src/storage_backend_iscsi.c:354
#, fuzzy, c-format
msgid "Failed to find any LUNs for session %s: %s"
msgstr "無法為網路 %s 取消定義"
#: src/storage_backend_iscsi.c:384
#, c-format
msgid "Failed to determine if %u:%u:%u:%u is a Direct-Access LUN"
msgstr ""
#: src/storage_backend_iscsi.c:429
#, fuzzy, c-format
msgid "Failed to find device link for lun %d"
msgstr "無法從 %s 建立區域"
#: src/storage_backend_iscsi.c:463
#, fuzzy, c-format
msgid "Failed to parse block path %s"
msgstr "無法將區域 %s 存至 %s"
#: src/storage_backend_iscsi.c:473
#, fuzzy
msgid "Failed allocating memory for scsidev"
msgstr "無法分配節點"
#: src/storage_backend_iscsi.c:554
msgid "portal"
msgstr ""
#: src/storage_backend_logical.c:166
msgid "malformed volume extent offset value"
msgstr ""
#: src/storage_backend_logical.c:171
msgid "malformed volume extent length value"
msgstr ""
#: src/storage_backend_logical.c:176
msgid "malformed volume extent size value"
msgstr ""
#: src/storage_backend_logical.c:229
#, fuzzy
msgid "lvs command failed"
msgstr "區域名稱"
#: src/storage_backend_logical.c:235
#, c-format
msgid "lvs command failed with exitstatus %d"
msgstr ""
#: src/storage_backend_logical.c:284
#, fuzzy
msgid "command line"
msgstr "區域名稱"
#: src/storage_backend_logical.c:301
#, c-format
msgid "cannot open device %s"
msgstr ""
#: src/storage_backend_logical.c:307
#, c-format
msgid "cannot clear device header %s"
msgstr ""
#: src/storage_backend_logical.c:314
#, c-format
msgid "cannot close device %s"
msgstr ""
#: src/storage_backend_logical.c:489
#, c-format
msgid "cannot find newly created volume '%s': %s"
msgstr ""
#: src/storage_conf.c:155
msgid "missing auth host attribute"
msgstr ""
#: src/storage_conf.c:162
msgid "missing auth passwd attribute"
msgstr ""
#: src/storage_conf.c:185 src/storage_conf.c:533
msgid "malformed octal mode"
msgstr ""
#: src/storage_conf.c:195
msgid "malformed owner element"
msgstr ""
#: src/storage_conf.c:206
msgid "malformed group element"
msgstr ""
#: src/storage_conf.c:231
#, fuzzy
msgid "cannot allocate storage pool"
msgstr "分配節點"
#: src/storage_conf.c:237 src/storage_conf.c:661
#, fuzzy
msgid "unknown root element"
msgstr "未知的主機 %s"
#: src/storage_conf.c:253 src/storage_conf.c:668
msgid "missing name element"
msgstr ""
#: src/storage_conf.c:261
#, fuzzy
msgid "unable to generate uuid"
msgstr "網路名稱或 uuid"
#: src/storage_conf.c:285
#, fuzzy
msgid "missing source host name"
msgstr "找不到裝置的來源資訊"
#: src/storage_conf.c:295
msgid "cannot extract source devices"
msgstr ""
#: src/storage_conf.c:300
#, fuzzy
msgid "device"
msgstr "以組絕"
#: src/storage_conf.c:308
#, fuzzy
msgid "missing source device path"
msgstr "找不到 root 裝置的資訊"
#: src/storage_conf.c:333
#, fuzzy, c-format
msgid "unknown auth type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/storage_conf.c:348
#, fuzzy
msgid "missing target path"
msgstr "找不到裝置的目標資訊"
#: src/storage_conf.c:379 src/storage_conf.c:736
msgid "malformed xml document"
msgstr ""
#: src/storage_conf.c:386 src/storage_conf.c:743
msgid "xmlXPathContext"
msgstr ""
#: src/storage_conf.c:427
#, fuzzy
msgid "unexpected pool type"
msgstr "無預期的 mime 類型"
#: src/storage_conf.c:511 src/storage_conf.c:851
msgid "xml"
msgstr ""
#: src/storage_conf.c:543 src/storage_conf.c:553
msgid "missing owner element"
msgstr ""
#: src/storage_conf.c:617
#, fuzzy, c-format
msgid "unknown size units '%s'"
msgstr "未知的主機 %s"
#: src/storage_conf.c:624
msgid "malformed capacity element"
msgstr ""
#: src/storage_conf.c:629
msgid "capacity element value too large"
msgstr ""
#: src/storage_conf.c:655
#, fuzzy
msgid "cannot allocate storage vol"
msgstr "分配節點"
#: src/storage_conf.c:679
msgid "missing capacity element"
msgstr ""
#: src/storage_conf.c:962
msgid "pool"
msgstr ""
#: src/storage_conf.c:1104
msgid "configFile"
msgstr ""
#: src/storage_conf.c:1118
msgid "config file"
msgstr ""
#: src/storage_conf.c:1126
#, fuzzy
msgid "failed to generate XML"
msgstr "無法讀取插槽 %d\n"
#: src/storage_driver.c:266 src/storage_driver.c:750 src/storage_driver.c:772
msgid "no pool with matching uuid"
msgstr ""
#: src/storage_driver.c:284
msgid "no pool with matching name"
msgstr ""
#: src/storage_driver.c:334 src/storage_driver.c:371
#, fuzzy
msgid "names"
msgstr "名稱"
#: src/storage_driver.c:406
msgid "storage pool already exists"
msgstr ""
#: src/storage_driver.c:479 src/storage_driver.c:516 src/storage_driver.c:555
#: src/storage_driver.c:586 src/storage_driver.c:627 src/storage_driver.c:664
#: src/storage_driver.c:705 src/storage_driver.c:734 src/storage_driver.c:828
#: src/storage_driver.c:853 src/storage_driver.c:898 src/storage_driver.c:982
#: src/storage_driver.c:1036 src/storage_driver.c:1099
#: src/storage_driver.c:1143 src/storage_driver.c:1177
msgid "no storage pool with matching uuid"
msgstr ""
#: src/storage_driver.c:485
msgid "pool is still active"
msgstr ""
#: src/storage_driver.c:526
#, fuzzy
msgid "pool already active"
msgstr "區域已經啟動"
#: src/storage_driver.c:565
#, fuzzy
msgid "storage pool is already active"
msgstr "區域已經啟動"
#: src/storage_driver.c:596 src/storage_driver.c:674 src/storage_driver.c:834
#: src/storage_driver.c:859 src/storage_driver.c:904 src/storage_driver.c:988
#: src/storage_driver.c:1042 src/storage_driver.c:1105
#: src/storage_driver.c:1149 src/storage_driver.c:1183
msgid "storage pool is not active"
msgstr ""
#: src/storage_driver.c:637
msgid "storage pool is still active"
msgstr ""
#: src/storage_driver.c:643
msgid "pool does not support volume delete"
msgstr ""
#: src/storage_driver.c:778
msgid "pool has no config file"
msgstr ""
#: src/storage_driver.c:912 src/storage_driver.c:1053
#: src/storage_driver.c:1113 src/storage_driver.c:1157
#: src/storage_driver.c:1191
msgid "no storage vol with matching name"
msgstr ""
#: src/storage_driver.c:941
msgid "no storage vol with matching key"
msgstr ""
#: src/storage_driver.c:966
msgid "no storage vol with matching path"
msgstr ""
#: src/storage_driver.c:1001
msgid "storage vol already exists"
msgstr ""
#: src/storage_driver.c:1008
msgid "storage pool does not support volume creation"
msgstr ""
#: src/storage_driver.c:1059
msgid "storage pool does not support vol deletion"
msgstr ""
#: src/test.c:248 src/test.c:613 src/test.c:1314
msgid "getting time of day"
msgstr "讀取當天的時間"
#: src/test.c:254 src/test.c:387 src/test.c:413 src/test.c:1591
msgid "domain"
msgstr "區域"
#: src/test.c:260 src/test.c:447 src/test.c:731
msgid "creating xpath context"
msgstr "建立 xpath 的內文"
#: src/test.c:266
msgid "domain name"
msgstr "區域名稱"
#: src/test.c:272 src/test.c:276
msgid "domain uuid"
msgstr "區域的 uuid"
#: src/test.c:284
msgid "domain memory"
msgstr "區域的記憶體"
#: src/test.c:293
msgid "domain current memory"
msgstr "區域目前的記憶體"
#: src/test.c:303
msgid "domain vcpus"
msgstr "區域的 vcpus"
#: src/test.c:312
msgid "domain reboot behaviour"
msgstr "區域的重新啟動行為"
#: src/test.c:322
msgid "domain poweroff behaviour"
msgstr "區域的關機行為"
#: src/test.c:332
msgid "domain crash behaviour"
msgstr "區域的當機行為"
#: src/test.c:406
msgid "load domain definition file"
msgstr "載入區域定義檔"
#: src/test.c:441 src/test.c:564 src/test.c:589
#, fuzzy
msgid "network"
msgstr "網路名稱"
#: src/test.c:453 src/virsh.c:2730
msgid "network name"
msgstr "網路名稱"
#: src/test.c:461 src/test.c:465 src/virsh.c:2621
msgid "network uuid"
msgstr "網路 uuid"
#: src/test.c:473
#, fuzzy
msgid "network forward"
msgstr "網路名稱"
#: src/test.c:482 src/test.c:492 src/test.c:497
msgid "ip address"
msgstr ""
#: src/test.c:487
msgid "ip netmask"
msgstr ""
#: src/test.c:582
#, fuzzy
msgid "load network definition file"
msgstr "載入區域定義檔"
#: src/test.c:710
msgid "loading host definition file"
msgstr "載入主機定義檔"
#: src/test.c:717
msgid "host"
msgstr "主機"
#: src/test.c:725
msgid "node"
msgstr "節點"
#: src/test.c:750
msgid "node cpu numa nodes"
msgstr "節點的處理器 numa 節點"
#: src/test.c:758
msgid "node cpu sockets"
msgstr "結點的處理器插槽"
#: src/test.c:766
msgid "node cpu cores"
msgstr "節點的處理器核心"
#: src/test.c:774
msgid "node cpu threads"
msgstr "節點的處理器執行續"
#: src/test.c:785
msgid "node active cpu"
msgstr "節點啟用中的處理器"
#: src/test.c:792
msgid "node cpu mhz"
msgstr "節點的處理器速度MHz"
#: src/test.c:807
msgid "node memory"
msgstr "節點的記憶體"
#: src/test.c:813
msgid "node domain list"
msgstr "節點的區域清單"
#: src/test.c:823
msgid "resolving domain filename"
msgstr "解析區域的檔名"
#: src/test.c:848
#, fuzzy
msgid "resolving network filename"
msgstr "解析區域的檔名"
#: src/test.c:935
msgid "testOpen: supply a path or use test:///default"
msgstr ""
#: src/test.c:1098
msgid "too many domains"
msgstr "過多區域"
#: src/test.c:1342
msgid "cannot allocate space for metadata"
msgstr ""
#: src/test.c:1348
#, fuzzy
msgid "cannot save domain"
msgstr "自動啟動一個區域"
#: src/test.c:1354 src/test.c:1458
msgid "cannot write header"
msgstr ""
#: src/test.c:1360
msgid "cannot write metadata length"
msgstr ""
#: src/test.c:1366
msgid "cannot write metadata"
msgstr ""
#: src/test.c:1374 src/test.c:1464
#, fuzzy
msgid "cannot save domain data"
msgstr "節點的區域清單"
#: src/test.c:1403
msgid "incomplete save header"
msgstr ""
#: src/test.c:1409
msgid "mismatched header magic"
msgstr ""
#: src/test.c:1415
#, fuzzy
msgid "failed to read metadata length"
msgstr "無法從 Xen 系統程式讀取"
#: src/test.c:1421
msgid "length of metadata out of range"
msgstr ""
#: src/test.c:1432
msgid "incomplete metdata"
msgstr ""
#: src/test.c:1453
#, fuzzy
msgid "cannot save domain core"
msgstr "節點的區域清單"
#: src/test.c:1615
msgid "Range exceeds available cells"
msgstr ""
#: src/test.c:1634
msgid "Domain is already running"
msgstr "區域已經啟動"
#: src/test.c:1649
msgid "Domain is still running"
msgstr "區域還在執行中"
#: src/test.c:1850 src/test.c:1875
#, fuzzy
msgid "too many networks"
msgstr "過多連線"
#: src/test.c:1894
#, fuzzy
msgid "Network is still running"
msgstr "區域還在執行中"
#: src/test.c:1908
#, fuzzy
msgid "Network is already running"
msgstr "區域已經啟動"
#: src/util.c:121
#, fuzzy, c-format
msgid "cannot create pipe: %s"
msgstr "無法讀取插槽 %d\n"
#: src/util.c:127
#, fuzzy, c-format
msgid "cannot fork child process: %s"
msgstr "無法暫停區域 %s"
#: src/util.c:495
#, c-format
msgid "%s: not implemented\n"
msgstr ""
#: src/uuid.c:103
#, c-format
msgid "Falling back to pseudorandom UUID, failed to generate random bytes: %s"
msgstr ""
#: src/virsh.c:337
msgid "print help"
msgstr "列印求助訊息"
#: src/virsh.c:338
msgid "Prints global help or command specific help."
msgstr "列印一般求助訊息,或特定指令的求助訊息。"
#: src/virsh.c:344
#, fuzzy
msgid "name of command"
msgstr "非作用中區域的名稱"
#: src/virsh.c:356
msgid ""
"Commands:\n"
"\n"
msgstr ""
"指令:\n"
"\n"
#: src/virsh.c:370
msgid "autostart a domain"
msgstr "自動啟動一個區域"
#: src/virsh.c:372
msgid "Configure a domain to be automatically started at boot."
msgstr "將區域設定為開機時自動啟動。"
#: src/virsh.c:377 src/virsh.c:477 src/virsh.c:671 src/virsh.c:708
#: src/virsh.c:765 src/virsh.c:832 src/virsh.c:1052 src/virsh.c:1096
#: src/virsh.c:1285 src/virsh.c:1330 src/virsh.c:1369 src/virsh.c:1408
#: src/virsh.c:1447 src/virsh.c:1486 src/virsh.c:1610 src/virsh.c:1697
#: src/virsh.c:1831 src/virsh.c:1888 src/virsh.c:1945 src/virsh.c:2067
#: src/virsh.c:2208 src/virsh.c:4310 src/virsh.c:4386 src/virsh.c:4447
#: src/virsh.c:4504 src/virsh.c:4561 src/virsh.c:4675 src/virsh.c:4794
#: src/virsh.c:4957
msgid "domain name, id or uuid"
msgstr "區域名稱、id 或 uuid"
#: src/virsh.c:378 src/virsh.c:2272 src/virsh.c:2780
msgid "disable autostarting"
msgstr "停用自動啟動"
#: src/virsh.c:399
#, fuzzy, c-format
msgid "Failed to mark domain %s as autostarted"
msgstr "無法將區域 %s 標示為 %s 自動啟動"
#: src/virsh.c:402
#, fuzzy, c-format
msgid "Failed to unmark domain %s as autostarted"
msgstr "無法將區域 %s 標示為 %s 自動啟動"
#: src/virsh.c:409
#, fuzzy, c-format
msgid "Domain %s marked as autostarted\n"
msgstr "區域 %s %s已標記為自動啟動\n"
#: src/virsh.c:411
#, fuzzy, c-format
msgid "Domain %s unmarked as autostarted\n"
msgstr "區域 %s %s已標記為自動啟動\n"
#: src/virsh.c:422
msgid "(re)connect to hypervisor"
msgstr "(重新)連至 hypervisor"
#: src/virsh.c:424
msgid ""
"Connect to local hypervisor. This is built-in command after shell start up."
msgstr "連上本機的 hypervisor。這是 shell 啟動後的內建指令。"
#: src/virsh.c:429
msgid "hypervisor connection URI"
msgstr "hypervisor 連線的 URI"
#: src/virsh.c:430
msgid "read-only connection"
msgstr "唯讀的連線"
#: src/virsh.c:442
msgid "Failed to disconnect from the hypervisor"
msgstr "無法從 hypervisor 處斷線"
#: src/virsh.c:460
msgid "Failed to connect to the hypervisor"
msgstr "無法連上 hypervisor"
#: src/virsh.c:470
msgid "connect to the guest console"
msgstr "連接客座端主控台"
#: src/virsh.c:472
msgid "Connect the virtual serial console for the guest"
msgstr "透過虛擬序列埠主控台,連接用戶端"
#: src/virsh.c:519
msgid "No console available for domain\n"
msgstr "區域中沒有可用的主控台\n"
#: src/virsh.c:536
msgid "console not implemented on this platform"
msgstr ""
#: src/virsh.c:547
msgid "list domains"
msgstr "列出區域"
#: src/virsh.c:548
msgid "Returns list of domains."
msgstr "傳回區域清單。"
#: src/virsh.c:553
msgid "list inactive domains"
msgstr "列出非作用中的區域"
#: src/virsh.c:554
msgid "list inactive & active domains"
msgstr "列出作用中與非作用中的區域"
#: src/virsh.c:576 src/virsh.c:583
msgid "Failed to list active domains"
msgstr "無法列出運作中的區域"
#: src/virsh.c:594 src/virsh.c:602
msgid "Failed to list inactive domains"
msgstr "無法列出非作用中的區域"
#: src/virsh.c:611
msgid "Id"
msgstr "Id"
#: src/virsh.c:611 src/virsh.c:2555 src/virsh.c:3363 src/virsh.c:4026
msgid "Name"
msgstr "名稱"
#: src/virsh.c:611 src/virsh.c:2555 src/virsh.c:3363
msgid "State"
msgstr "狀態"
#: src/virsh.c:624 src/virsh.c:646 src/virsh.c:5883 src/virsh.c:5899
msgid "no state"
msgstr "無狀態"
#: src/virsh.c:665
msgid "domain state"
msgstr "區域狀態"
#: src/virsh.c:666
#, fuzzy
msgid "Returns state about a domain."
msgstr "傳回執行中區域的狀態"
#: src/virsh.c:702
msgid "get device block stats for a domain"
msgstr ""
#: src/virsh.c:703
#, fuzzy
msgid "Get device block stats for a running domain."
msgstr "傳回執行中區域的狀態"
#: src/virsh.c:709
#, fuzzy
msgid "block device"
msgstr "以組絕"
#: src/virsh.c:730
#, fuzzy, c-format
msgid "Failed to get block stats %s %s"
msgstr "無法將區域 %s 存至 %s"
#: src/virsh.c:759
#, fuzzy
msgid "get network interface stats for a domain"
msgstr "網路名稱"
#: src/virsh.c:760
#, fuzzy
msgid "Get network interface stats for a running domain."
msgstr "傳回執行中區域的狀態"
#: src/virsh.c:766
msgid "interface device"
msgstr ""
#: src/virsh.c:787
#, fuzzy, c-format
msgid "Failed to get interface stats %s %s"
msgstr "無法取得節點資訊"
#: src/virsh.c:826
msgid "suspend a domain"
msgstr "暫停區域"
#: src/virsh.c:827
msgid "Suspend a running domain."
msgstr "暫停執行中的區域。"
#: src/virsh.c:850
#, c-format
msgid "Domain %s suspended\n"
msgstr "區域 %s 已經暫停\n"
#: src/virsh.c:852
#, c-format
msgid "Failed to suspend domain %s"
msgstr "無法暫停區域 %s"
#: src/virsh.c:865
msgid "create a domain from an XML file"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:866
msgid "Create a domain."
msgstr "建立區域。"
#: src/virsh.c:871 src/virsh.c:919
#, fuzzy
msgid "file containing an XML domain description"
msgstr "包含 XML 區域描述的檔案"
#: src/virsh.c:898
#, c-format
msgid "Domain %s created from %s\n"
msgstr "區域 %s 建立自 %s\n"
#: src/virsh.c:902
#, c-format
msgid "Failed to create domain from %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:913
msgid "define (but don't start) a domain from an XML file"
msgstr "從 XML 檔案定義(但不啟動)區域"
#: src/virsh.c:914
msgid "Define a domain."
msgstr "定義區域。"
#: src/virsh.c:946
#, c-format
msgid "Domain %s defined from %s\n"
msgstr "區域 %s 定義自 %s\n"
#: src/virsh.c:950
#, c-format
msgid "Failed to define domain from %s"
msgstr "無法從 %s 定義區域"
#: src/virsh.c:961
msgid "undefine an inactive domain"
msgstr "取消定義非作用中的區域"
#: src/virsh.c:962
msgid "Undefine the configuration for an inactive domain."
msgstr "為非作用中的區域取消定義。"
#: src/virsh.c:967 src/virsh.c:2136
msgid "domain name or uuid"
msgstr "區域名稱或 uuid"
#: src/virsh.c:985
#, c-format
msgid "Domain %s has been undefined\n"
msgstr "區域 %s 已經取消定義\n"
#: src/virsh.c:987
#, c-format
msgid "Failed to undefine domain %s"
msgstr "無法為區域 %s 取消定義"
#: src/virsh.c:1001
msgid "start a (previously defined) inactive domain"
msgstr "開啟(先前定義的)非作用中區域"
#: src/virsh.c:1002
msgid "Start a domain."
msgstr "開啟一個區域。"
#: src/virsh.c:1007
msgid "name of the inactive domain"
msgstr "非作用中區域的名稱"
#: src/virsh.c:1024
msgid "Domain is already active"
msgstr "區域已經啟動"
#: src/virsh.c:1030
#, c-format
msgid "Domain %s started\n"
msgstr "區域 %s 已開啟\n"
#: src/virsh.c:1033
#, c-format
msgid "Failed to start domain %s"
msgstr "無法開啟區域 %s"
#: src/virsh.c:1046
msgid "save a domain state to a file"
msgstr "將區域狀態存至檔案"
#: src/virsh.c:1047
msgid "Save a running domain."
msgstr "儲存執行中的區域。"
#: src/virsh.c:1053
msgid "where to save the data"
msgstr "將資料存至何處"
#: src/virsh.c:1075
#, c-format
msgid "Domain %s saved to %s\n"
msgstr "區域 %s 已存至 %s\n"
#: src/virsh.c:1077
#, c-format
msgid "Failed to save domain %s to %s"
msgstr "無法將區域 %s 存至 %s"
#: src/virsh.c:1090
msgid "show/set scheduler parameters"
msgstr ""
#: src/virsh.c:1091
msgid "Show/Set scheduler parameters."
msgstr ""
#: src/virsh.c:1097
msgid "weight for XEN_CREDIT"
msgstr ""
#: src/virsh.c:1098
msgid "cap for XEN_CREDIT"
msgstr ""
#: src/virsh.c:1130
#, fuzzy
msgid "Invalid value of weight"
msgstr "記憶體大小 %d 不是有效的數值"
#: src/virsh.c:1140
#, fuzzy
msgid "Invalid value of cap"
msgstr "記憶體大小 %d 不是有效的數值"
#: src/virsh.c:1182 src/virsh.c:1186
msgid "Scheduler"
msgstr ""
#: src/virsh.c:1186
#, fuzzy
msgid "Unknown"
msgstr "未知的主機"
#: src/virsh.c:1241
msgid "restore a domain from a saved state in a file"
msgstr "從檔案中的儲存狀態回復區域"
#: src/virsh.c:1242
msgid "Restore a domain."
msgstr "回復區域。"
#: src/virsh.c:1247
msgid "the state to restore"
msgstr "要回復的狀態"
#: src/virsh.c:1266
#, c-format
msgid "Domain restored from %s\n"
msgstr "從 %s 回復區域\n"
#: src/virsh.c:1268
#, c-format
msgid "Failed to restore domain from %s"
msgstr "無法從 %s 回復區域"
#: src/virsh.c:1279
msgid "dump the core of a domain to a file for analysis"
msgstr "將一個區域的核心傾印到檔案中,以供分析用"
#: src/virsh.c:1280
msgid "Core dump a domain."
msgstr "傾印一個區域的核心。"
#: src/virsh.c:1286
msgid "where to dump the core"
msgstr "將核心傾印至何處"
#: src/virsh.c:1308
#, c-format
msgid "Domain %s dumpd to %s\n"
msgstr "區域 %s 已傾印至 %s\n"
#: src/virsh.c:1310
#, c-format
msgid "Failed to core dump domain %s to %s"
msgstr "無法將區域 %s 的核心傾印至 %s"
#: src/virsh.c:1324
msgid "resume a domain"
msgstr "繼續執行區域"
#: src/virsh.c:1325
msgid "Resume a previously suspended domain."
msgstr "繼續一項先前暫停的區域。"
#: src/virsh.c:1348
#, c-format
msgid "Domain %s resumed\n"
msgstr "區域 %s 已經繼續執行\n"
#: src/virsh.c:1350
#, c-format
msgid "Failed to resume domain %s"
msgstr "無法繼續區域 %s"
#: src/virsh.c:1363
msgid "gracefully shutdown a domain"
msgstr "以正確方法讓區域停機"
#: src/virsh.c:1364
msgid "Run shutdown in the target domain."
msgstr "在目標區域執行關機。"
#: src/virsh.c:1387
#, c-format
msgid "Domain %s is being shutdown\n"
msgstr "區域 %s 正在執行關機\n"
#: src/virsh.c:1389
#, c-format
msgid "Failed to shutdown domain %s"
msgstr "無法關上區域 %s"
#: src/virsh.c:1402
msgid "reboot a domain"
msgstr "重新啟動區域"
#: src/virsh.c:1403
msgid "Run a reboot command in the target domain."
msgstr "在目標區域中執行重新開機指令。"
#: src/virsh.c:1426
#, c-format
msgid "Domain %s is being rebooted\n"
msgstr "區域 %s 正在重新開機中\n"
#: src/virsh.c:1428
#, c-format
msgid "Failed to reboot domain %s"
msgstr "無法重新啟動區域 %s"
#: src/virsh.c:1441
msgid "destroy a domain"
msgstr "刪除一個區域"
#: src/virsh.c:1442
msgid "Destroy a given domain."
msgstr "刪除給定的區域。"
#: src/virsh.c:1465
#, c-format
msgid "Domain %s destroyed\n"
msgstr "區域 %s 已經刪除\n"
#: src/virsh.c:1467
#, c-format
msgid "Failed to destroy domain %s"
msgstr "無法刪除區域 %s"
#: src/virsh.c:1480
msgid "domain information"
msgstr "區域資訊"
#: src/virsh.c:1481
msgid "Returns basic information about the domain."
msgstr "傳回區域的相關資訊。"
#: src/virsh.c:1507 src/virsh.c:1509
msgid "Id:"
msgstr "Id:"
#: src/virsh.c:1510 src/virsh.c:3468 src/virsh.c:3914
msgid "Name:"
msgstr "名稱:"
#: src/virsh.c:1513 src/virsh.c:3471
msgid "UUID:"
msgstr "UUID"
#: src/virsh.c:1516
msgid "OS Type:"
msgstr "作業系統類型:"
#: src/virsh.c:1521 src/virsh.c:1654 src/virsh.c:3478 src/virsh.c:3482
#: src/virsh.c:3486 src/virsh.c:3490
msgid "State:"
msgstr "狀態:"
#: src/virsh.c:1524 src/virsh.c:2017
msgid "CPU(s):"
msgstr "處理器數目:"
#: src/virsh.c:1531 src/virsh.c:1661
msgid "CPU time:"
msgstr "處理器時間:"
#: src/virsh.c:1535 src/virsh.c:1538
msgid "Max memory:"
msgstr "最大記憶體:"
#: src/virsh.c:1539
msgid "no limit"
msgstr "沒有限制"
#: src/virsh.c:1541
msgid "Used memory:"
msgstr "已使用的記憶體:"
#: src/virsh.c:1549
#, fuzzy
msgid "Autostart:"
msgstr "自動啟動"
#: src/virsh.c:1550
#, fuzzy
msgid "enable"
msgstr "名稱"
#: src/virsh.c:1550
msgid "disable"
msgstr ""
#: src/virsh.c:1562
#, fuzzy
msgid "NUMA free memory"
msgstr "已使用的記憶體:"
#: src/virsh.c:1563
msgid "display available free memory for the NUMA cell."
msgstr ""
#: src/virsh.c:1568
#, fuzzy
msgid "NUMA cell number"
msgstr "NUMA cell"
#: src/virsh.c:1592
msgid "Total"
msgstr ""
#: src/virsh.c:1604
msgid "domain vcpu information"
msgstr "區域 vcpu 的資訊"
#: src/virsh.c:1605
msgid "Returns basic information about the domain virtual CPUs."
msgstr "傳回區域的虛擬處理器之基本資訊。"
#: src/virsh.c:1652
msgid "VCPU:"
msgstr "VCPU"
#: src/virsh.c:1653
msgid "CPU:"
msgstr "處理器:"
#: src/virsh.c:1663
msgid "CPU Affinity:"
msgstr "處理器的同屬:"
#: src/virsh.c:1675
msgid "Domain shut off, virtual CPUs not present."
msgstr ""
#: src/virsh.c:1691
msgid "control domain vcpu affinity"
msgstr "控制區域 vcpu 的同屬"
#: src/virsh.c:1692
msgid "Pin domain VCPUs to host physical CPUs."
msgstr "讓區域 VCPU 符合主機的實際處理器。"
#: src/virsh.c:1698
msgid "vcpu number"
msgstr "vcpu 數量"
#: src/virsh.c:1699
msgid "host cpu number(s) (comma separated)"
msgstr "主機處理器數目(以逗號隔開)"
#: src/virsh.c:1727
msgid "vcpupin: Invalid or missing vCPU number."
msgstr ""
#: src/virsh.c:1733
msgid "vcpupin: Missing cpulist"
msgstr ""
#: src/virsh.c:1745
#, fuzzy
msgid "vcpupin: failed to get domain informations."
msgstr "無法取得節點資訊"
#: src/virsh.c:1751
msgid "vcpupin: Invalid vCPU number."
msgstr ""
#: src/virsh.c:1760
msgid "cpulist: Invalid format. Empty string."
msgstr ""
#: src/virsh.c:1770
#, c-format
msgid ""
"cpulist: %s: Invalid format. Expecting digit at position %d (near '%c')."
msgstr ""
#: src/virsh.c:1780
#, c-format
msgid ""
"cpulist: %s: Invalid format. Expecting digit or comma at position %d (near '%"
"c')."
msgstr ""
#: src/virsh.c:1787
#, c-format
msgid "cpulist: %s: Invalid format. Trailing comma at position %d."
msgstr ""
#: src/virsh.c:1801
#, c-format
msgid "Physical CPU %d doesn't exist."
msgstr "實體處理器「%d」不存在。"
#: src/virsh.c:1825
msgid "change number of virtual CPUs"
msgstr "改變虛擬處理器的數量"
#: src/virsh.c:1826
#, fuzzy
msgid "Change the number of virtual CPUs in the guest domain."
msgstr "改變在客座區域中啟用的虛擬器處理器數量"
#: src/virsh.c:1832
msgid "number of virtual CPUs"
msgstr "虛擬處理器的數量"
#: src/virsh.c:1852
#, fuzzy
msgid "Invalid number of virtual CPUs."
msgstr "虛擬處理器的數量"
#: src/virsh.c:1864
#, fuzzy
msgid "Too many virtual CPUs."
msgstr "太多虛擬處理器。"
#: src/virsh.c:1882
msgid "change memory allocation"
msgstr "改變記憶體分配"
#: src/virsh.c:1883
msgid "Change the current memory allocation in the guest domain."
msgstr "改變客座區域中,目前的記憶體分配。"
#: src/virsh.c:1889
#, fuzzy
msgid "number of kilobytes of memory"
msgstr "記憶體數量(位元組)"
#: src/virsh.c:1910 src/virsh.c:1922 src/virsh.c:1967
#, c-format
msgid "Invalid value of %d for memory size"
msgstr "記憶體大小 %d 不是有效的數值"
#: src/virsh.c:1916
msgid "Unable to verify MaxMemorySize"
msgstr ""
#: src/virsh.c:1939
msgid "change maximum memory limit"
msgstr "改變最大記憶體的限制"
#: src/virsh.c:1940
msgid "Change the maximum memory allocation limit in the guest domain."
msgstr "改變客座區域的最大記憶體分配限制。"
#: src/virsh.c:1946
#, fuzzy
msgid "maximum memory limit in kilobytes"
msgstr "最大記憶體限制(位元組)"
#: src/virsh.c:1973
msgid "Unable to verify current MemorySize"
msgstr ""
#: src/virsh.c:1980
#, fuzzy
msgid "Unable to shrink current MemorySize"
msgstr "區域目前的記憶體"
#: src/virsh.c:1986
msgid "Unable to change MaxMemorySize"
msgstr ""
#: src/virsh.c:1999
msgid "node information"
msgstr "節點資訊"
#: src/virsh.c:2000
msgid "Returns basic information about the node."
msgstr "傳回節點的基本資訊。"
#: src/virsh.c:2013
msgid "failed to get node information"
msgstr "無法取得節點資訊"
#: src/virsh.c:2016
msgid "CPU model:"
msgstr "處理器類型:"
#: src/virsh.c:2018
msgid "CPU frequency:"
msgstr "處理器的頻率:"
#: src/virsh.c:2019
msgid "CPU socket(s):"
msgstr "處理器的插槽:"
#: src/virsh.c:2020
msgid "Core(s) per socket:"
msgstr "每個插槽的核心:"
#: src/virsh.c:2021
msgid "Thread(s) per core:"
msgstr "每個核心的執行續:"
#: src/virsh.c:2022
msgid "NUMA cell(s):"
msgstr "NUMA cell"
#: src/virsh.c:2023
msgid "Memory size:"
msgstr "記憶體大小:"
#: src/virsh.c:2033
msgid "capabilities"
msgstr "能力"
#: src/virsh.c:2034
msgid "Returns capabilities of hypervisor/driver."
msgstr "傳回 hypervisor 或驅動程式的能力。"
#: src/virsh.c:2047
msgid "failed to get capabilities"
msgstr "無法取得能力方面的資訊"
#: src/virsh.c:2061
msgid "domain information in XML"
msgstr "XML 格式的區域資訊"
#: src/virsh.c:2062
#, fuzzy
msgid "Output the domain information as an XML dump to stdout."
msgstr "將區域資訊以 XML 格式輸出到螢幕上。"
#: src/virsh.c:2101
msgid "convert a domain id or UUID to domain name"
msgstr "將區域 id 或 UUID 轉為區域名稱"
#: src/virsh.c:2106
msgid "domain id or uuid"
msgstr "區域 id 或 uuid"
#: src/virsh.c:2131
msgid "convert a domain name or UUID to domain id"
msgstr "將區域名稱或 UUID 轉為區域 ID"
#: src/virsh.c:2166
msgid "convert a domain name or id to domain UUID"
msgstr "將區域名稱或 ID 轉為 UUID"
#: src/virsh.c:2171
msgid "domain id or name"
msgstr "區域 ID 或名稱"
#: src/virsh.c:2190
msgid "failed to get domain UUID"
msgstr "無法取得區域 UUID"
#: src/virsh.c:2201
msgid "migrate domain to another host"
msgstr ""
#: src/virsh.c:2202
msgid "Migrate domain to another host. Add --live for live migration."
msgstr ""
#: src/virsh.c:2207
#, fuzzy
msgid "live migration"
msgstr "節點資訊"
#: src/virsh.c:2209
#, fuzzy
msgid "connection URI of the destination host"
msgstr "連接客座端主控台"
#: src/virsh.c:2210
msgid "migration URI, usually can be omitted"
msgstr ""
#: src/virsh.c:2232
msgid "migrate: Missing desturi"
msgstr ""
#: src/virsh.c:2264
msgid "autostart a network"
msgstr "自動啟動網路"
#: src/virsh.c:2266
msgid "Configure a network to be automatically started at boot."
msgstr "將網路設定為開機時自動啟動。"
#: src/virsh.c:2271 src/virsh.c:2692
msgid "network name or uuid"
msgstr "網路名稱或 uuid"
#: src/virsh.c:2293
#, fuzzy, c-format
msgid "failed to mark network %s as autostarted"
msgstr "無法%s將網路標記為%s自動啟動"
#: src/virsh.c:2296
#, fuzzy, c-format
msgid "failed to unmark network %s as autostarted"
msgstr "無法%s將網路標記為%s自動啟動"
#: src/virsh.c:2303
#, fuzzy, c-format
msgid "Network %s marked as autostarted\n"
msgstr "網路 %s %s標記為自動啟動\n"
#: src/virsh.c:2305
#, fuzzy, c-format
msgid "Network %s unmarked as autostarted\n"
msgstr "網路 %s %s標記為自動啟動\n"
#: src/virsh.c:2315
msgid "create a network from an XML file"
msgstr "從 XML 檔案建立網路"
#: src/virsh.c:2316
msgid "Create a network."
msgstr "建立網路。"
#: src/virsh.c:2321 src/virsh.c:2369
msgid "file containing an XML network description"
msgstr "包含 XML 網路描述的檔案"
#: src/virsh.c:2348
#, c-format
msgid "Network %s created from %s\n"
msgstr "網路 %s 建立自 %s\n"
#: src/virsh.c:2351
#, c-format
msgid "Failed to create network from %s"
msgstr "無法從 %s 建立網路"
#: src/virsh.c:2363
msgid "define (but don't start) a network from an XML file"
msgstr "從 XML 檔案定義(但不啟動)網路"
#: src/virsh.c:2364
msgid "Define a network."
msgstr "定義網路。"
#: src/virsh.c:2396
#, c-format
msgid "Network %s defined from %s\n"
msgstr "網路 %s 定義自 %s\n"
#: src/virsh.c:2399
#, c-format
msgid "Failed to define network from %s"
msgstr "無法從 %s 定義網路"
#: src/virsh.c:2411
msgid "destroy a network"
msgstr "刪除一個網路"
#: src/virsh.c:2412
msgid "Destroy a given network."
msgstr "刪除給定的網路。"
#: src/virsh.c:2417 src/virsh.c:2457
msgid "network name, id or uuid"
msgstr "網路名稱、id 或 uuid"
#: src/virsh.c:2435
#, c-format
msgid "Network %s destroyed\n"
msgstr "網路 %s 已經刪除\n"
#: src/virsh.c:2437
#, c-format
msgid "Failed to destroy network %s"
msgstr "無法刪除網路 %s"
#: src/virsh.c:2451
msgid "network information in XML"
msgstr "XML 格式的網路資訊"
#: src/virsh.c:2452
#, fuzzy
msgid "Output the network information as an XML dump to stdout."
msgstr "將網路資訊以 XML 格式輸出到螢幕上。"
#: src/virsh.c:2492
msgid "list networks"
msgstr "列出網路"
#: src/virsh.c:2493
msgid "Returns list of networks."
msgstr "傳回網路清單。"
#: src/virsh.c:2498
msgid "list inactive networks"
msgstr "列出非作用中的網路"
#: src/virsh.c:2499
msgid "list inactive & active networks"
msgstr "列出作用中與非作用中的網路"
#: src/virsh.c:2519 src/virsh.c:2527
msgid "Failed to list active networks"
msgstr "無法列出運作中的網路"
#: src/virsh.c:2538 src/virsh.c:2546
msgid "Failed to list inactive networks"
msgstr "無法列出非作用中的網路"
#: src/virsh.c:2555 src/virsh.c:3363
msgid "Autostart"
msgstr "自動啟動"
#: src/virsh.c:2570 src/virsh.c:2593 src/virsh.c:3378 src/virsh.c:3401
msgid "no autostart"
msgstr "不自動啟動"
#: src/virsh.c:2576 src/virsh.c:3384
msgid "active"
msgstr "啟用"
#: src/virsh.c:2599 src/virsh.c:3407 src/virsh.c:3479
msgid "inactive"
msgstr "非啟用中"
#: src/virsh.c:2616
msgid "convert a network UUID to network name"
msgstr "將網路 id 或 UUID 轉為網路名稱"
#: src/virsh.c:2647
msgid "start a (previously defined) inactive network"
msgstr "開啟(先前定義的)非作用中網路"
#: src/virsh.c:2648
msgid "Start a network."
msgstr "啟動一個網路。"
#: src/virsh.c:2653
msgid "name of the inactive network"
msgstr "非作用中網路的名稱"
#: src/virsh.c:2670
#, c-format
msgid "Network %s started\n"
msgstr "網路 %s 已開啟\n"
#: src/virsh.c:2673
#, c-format
msgid "Failed to start network %s"
msgstr "無法開啟網路 %s"
#: src/virsh.c:2686
msgid "undefine an inactive network"
msgstr "取消定義非作用中的網路"
#: src/virsh.c:2687
msgid "Undefine the configuration for an inactive network."
msgstr "為非作用中的網路取消定義。"
#: src/virsh.c:2710
#, c-format
msgid "Network %s has been undefined\n"
msgstr "網路 %s 已經取消定義\n"
#: src/virsh.c:2712
#, c-format
msgid "Failed to undefine network %s"
msgstr "無法為網路 %s 取消定義"
#: src/virsh.c:2725
msgid "convert a network name to network UUID"
msgstr "將網路名稱轉為網路 UUID"
#: src/virsh.c:2750
msgid "failed to get network UUID"
msgstr "無法取得網路 UUID"
#: src/virsh.c:2772
#, fuzzy
msgid "autostart a pool"
msgstr "自動啟動一個區域"
#: src/virsh.c:2774
#, fuzzy
msgid "Configure a pool to be automatically started at boot."
msgstr "將區域設定為開機時自動啟動。"
#: src/virsh.c:2779 src/virsh.c:3105 src/virsh.c:3145 src/virsh.c:3185
#: src/virsh.c:3225 src/virsh.c:3265 src/virsh.c:3450 src/virsh.c:3718
#: src/virsh.c:3854 src/virsh.c:3896 src/virsh.c:3948 src/virsh.c:3990
#: src/virsh.c:4134
#, fuzzy
msgid "pool name or uuid"
msgstr "區域名稱或 uuid"
#: src/virsh.c:2801
#, fuzzy, c-format
msgid "failed to mark pool %s as autostarted"
msgstr "無法%s將網路標記為%s自動啟動"
#: src/virsh.c:2804
#, fuzzy, c-format
msgid "failed to unmark pool %s as autostarted"
msgstr "無法%s將網路標記為%s自動啟動"
#: src/virsh.c:2811
#, fuzzy, c-format
msgid "Pool %s marked as autostarted\n"
msgstr "區域 %s %s已標記為自動啟動\n"
#: src/virsh.c:2813
#, fuzzy, c-format
msgid "Pool %s unmarked as autostarted\n"
msgstr "區域 %s %s已標記為自動啟動\n"
#: src/virsh.c:2823
#, fuzzy
msgid "create a pool from an XML file"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:2824 src/virsh.c:2871
#, fuzzy
msgid "Create a pool."
msgstr "建立區域。"
#: src/virsh.c:2829 src/virsh.c:2967
#, fuzzy
msgid "file containing an XML pool description"
msgstr "包含 XML 區域描述的檔案"
#: src/virsh.c:2856
#, fuzzy, c-format
msgid "Pool %s created from %s\n"
msgstr "區域 %s 建立自 %s\n"
#: src/virsh.c:2859
#, fuzzy, c-format
msgid "Failed to create pool from %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:2870
#, fuzzy
msgid "create a pool from a set of args"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:2876 src/virsh.c:3015
#, fuzzy
msgid "name of the pool"
msgstr "非作用中區域的名稱"
#: src/virsh.c:2877 src/virsh.c:3016
msgid "type of the pool"
msgstr ""
#: src/virsh.c:2878 src/virsh.c:3017
msgid "source-host for underlying storage"
msgstr ""
#: src/virsh.c:2879 src/virsh.c:3018
msgid "source path for underlying storage"
msgstr ""
#: src/virsh.c:2880 src/virsh.c:3019
msgid "source device for underlying storage"
msgstr ""
#: src/virsh.c:2881 src/virsh.c:3020
msgid "target for underlying storage"
msgstr ""
#: src/virsh.c:2933 src/virsh.c:3071 src/virsh.c:3683
#, fuzzy
msgid "Failed to allocate XML buffer"
msgstr "無法分配節點"
#: src/virsh.c:2942
#, fuzzy, c-format
msgid "Pool %s created\n"
msgstr "區域 %s 建立自 %s\n"
#: src/virsh.c:2946
#, fuzzy, c-format
msgid "Failed to create pool %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:2961
#, fuzzy
msgid "define (but don't start) a pool from an XML file"
msgstr "從 XML 檔案定義(但不啟動)區域"
#: src/virsh.c:2962 src/virsh.c:3010
#, fuzzy
msgid "Define a pool."
msgstr "定義區域。"
#: src/virsh.c:2994
#, fuzzy, c-format
msgid "Pool %s defined from %s\n"
msgstr "區域 %s 定義自 %s\n"
#: src/virsh.c:2997
#, fuzzy, c-format
msgid "Failed to define pool from %s"
msgstr "無法從 %s 定義區域"
#: src/virsh.c:3009
msgid "define a pool from a set of args"
msgstr ""
#: src/virsh.c:3080
#, fuzzy, c-format
msgid "Pool %s defined\n"
msgstr "區域 %s 定義自 %s\n"
#: src/virsh.c:3084
#, fuzzy, c-format
msgid "Failed to define pool %s"
msgstr "無法為區域 %s 取消定義"
#: src/virsh.c:3099
msgid "build a pool"
msgstr ""
#: src/virsh.c:3100
msgid "Build a given pool."
msgstr ""
#: src/virsh.c:3123
#, c-format
msgid "Pool %s builded\n"
msgstr ""
#: src/virsh.c:3125
#, fuzzy, c-format
msgid "Failed to build pool %s"
msgstr "無法暫停區域 %s"
#: src/virsh.c:3139
#, fuzzy
msgid "destroy a pool"
msgstr "刪除一個區域"
#: src/virsh.c:3140
#, fuzzy
msgid "Destroy a given pool."
msgstr "刪除給定的區域。"
#: src/virsh.c:3163
#, fuzzy, c-format
msgid "Pool %s destroyed\n"
msgstr "區域 %s 已經刪除\n"
#: src/virsh.c:3165
#, fuzzy, c-format
msgid "Failed to destroy pool %s"
msgstr "無法刪除區域 %s"
#: src/virsh.c:3179
msgid "delete a pool"
msgstr ""
#: src/virsh.c:3180
#, fuzzy
msgid "Delete a given pool."
msgstr "刪除給定的區域。"
#: src/virsh.c:3203
#, fuzzy, c-format
msgid "Pool %s deleted\n"
msgstr "區域 %s 已經刪除\n"
#: src/virsh.c:3205
#, fuzzy, c-format
msgid "Failed to delete pool %s"
msgstr "無法刪除區域 %s"
#: src/virsh.c:3219
msgid "refresh a pool"
msgstr ""
#: src/virsh.c:3220
msgid "Refresh a given pool."
msgstr ""
#: src/virsh.c:3243
#, fuzzy, c-format
msgid "Pool %s refreshed\n"
msgstr "區域 %s 已經繼續執行\n"
#: src/virsh.c:3245
#, fuzzy, c-format
msgid "Failed to refresh pool %s"
msgstr "無法繼續區域 %s"
#: src/virsh.c:3259
#, fuzzy
msgid "pool information in XML"
msgstr "XML 格式的區域資訊"
#: src/virsh.c:3260
#, fuzzy
msgid "Output the pool information as an XML dump to stdout."
msgstr "將區域資訊以 XML 格式輸出到螢幕上。"
#: src/virsh.c:3300
#, fuzzy
msgid "list pools"
msgstr "列出區域"
#: src/virsh.c:3301
#, fuzzy
msgid "Returns list of pools."
msgstr "傳回區域清單。"
#: src/virsh.c:3306
#, fuzzy
msgid "list inactive pools"
msgstr "列出非作用中的區域"
#: src/virsh.c:3307
#, fuzzy
msgid "list inactive & active pools"
msgstr "列出作用中與非作用中的區域"
#: src/virsh.c:3327 src/virsh.c:3335
#, fuzzy
msgid "Failed to list active pools"
msgstr "無法列出運作中的區域"
#: src/virsh.c:3346 src/virsh.c:3354
#, fuzzy
msgid "Failed to list inactive pools"
msgstr "無法列出非作用中的區域"
#: src/virsh.c:3444
#, fuzzy
msgid "storage pool information"
msgstr "節點資訊"
#: src/virsh.c:3445
#, fuzzy
msgid "Returns basic information about the storage pool."
msgstr "傳回節點的基本資訊。"
#: src/virsh.c:3483
msgid "building"
msgstr ""
#: src/virsh.c:3487 src/virsh.c:5869 src/virsh.c:5895
msgid "running"
msgstr "執行中"
#: src/virsh.c:3491
msgid "degraded"
msgstr ""
#: src/virsh.c:3498 src/virsh.c:3924
msgid "Capacity:"
msgstr ""
#: src/virsh.c:3501 src/virsh.c:3927
#, fuzzy
msgid "Allocation:"
msgstr "分配區域"
#: src/virsh.c:3504
msgid "Available:"
msgstr ""
#: src/virsh.c:3520
#, fuzzy
msgid "convert a pool UUID to pool name"
msgstr "將網路 id 或 UUID 轉為網路名稱"
#: src/virsh.c:3525
#, fuzzy
msgid "pool uuid"
msgstr "區域的 uuid"
#: src/virsh.c:3551
#, fuzzy
msgid "start a (previously defined) inactive pool"
msgstr "開啟(先前定義的)非作用中區域"
#: src/virsh.c:3552
#, fuzzy
msgid "Start a pool."
msgstr "開啟一個區域。"
#: src/virsh.c:3557
#, fuzzy
msgid "name of the inactive pool"
msgstr "非作用中區域的名稱"
#: src/virsh.c:3574
#, fuzzy, c-format
msgid "Pool %s started\n"
msgstr "區域 %s 已開啟\n"
#: src/virsh.c:3577
#, fuzzy, c-format
msgid "Failed to start pool %s"
msgstr "無法開啟區域 %s"
#: src/virsh.c:3590
#, fuzzy
msgid "create a volume from a set of args"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:3591 src/virsh.c:3790
#, fuzzy
msgid "Create a vol."
msgstr "建立區域。"
#: src/virsh.c:3596 src/virsh.c:3756 src/virsh.c:3795
#, fuzzy
msgid "pool name"
msgstr "區域名稱"
#: src/virsh.c:3597
#, fuzzy
msgid "name of the volume"
msgstr "非作用中區域的名稱"
#: src/virsh.c:3598
msgid "size of the vol with optional k,M,G,T suffix"
msgstr ""
#: src/virsh.c:3599
msgid "initial allocation size with optional k,M,G,T suffix"
msgstr ""
#: src/virsh.c:3600
msgid "file format type raw,bochs,qcow,qcow2,vmdk"
msgstr ""
#: src/virsh.c:3658 src/virsh.c:3663
#, c-format
msgid "Malformed size %s"
msgstr ""
#: src/virsh.c:3692
#, fuzzy, c-format
msgid "Vol %s created\n"
msgstr "區域 %s 建立自 %s\n"
#: src/virsh.c:3696
#, fuzzy, c-format
msgid "Failed to create vol %s"
msgstr "無法讀取插槽 %d\n"
#: src/virsh.c:3712
#, fuzzy
msgid "undefine an inactive pool"
msgstr "取消定義非作用中的區域"
#: src/virsh.c:3713
#, fuzzy
msgid "Undefine the configuration for an inactive pool."
msgstr "為非作用中的區域取消定義。"
#: src/virsh.c:3736
#, fuzzy, c-format
msgid "Pool %s has been undefined\n"
msgstr "區域 %s 已經取消定義\n"
#: src/virsh.c:3738
#, fuzzy, c-format
msgid "Failed to undefine pool %s"
msgstr "無法為區域 %s 取消定義"
#: src/virsh.c:3751
#, fuzzy
msgid "convert a pool name to pool UUID"
msgstr "將網路名稱轉為網路 UUID"
#: src/virsh.c:3776
#, fuzzy
msgid "failed to get pool UUID"
msgstr "無法取得區域 UUID"
#: src/virsh.c:3789
#, fuzzy
msgid "create a vol from an XML file"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:3796
#, fuzzy
msgid "file containing an XML vol description"
msgstr "包含 XML 區域描述的檔案"
#: src/virsh.c:3833
#, fuzzy, c-format
msgid "Vol %s created from %s\n"
msgstr "區域 %s 建立自 %s\n"
#: src/virsh.c:3837
#, fuzzy, c-format
msgid "Failed to create vol from %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:3848
msgid "delete a vol"
msgstr ""
#: src/virsh.c:3849
#, fuzzy
msgid "Delete a given vol."
msgstr "刪除給定的區域。"
#: src/virsh.c:3855 src/virsh.c:3897 src/virsh.c:3949
msgid "vol name, key or path"
msgstr ""
#: src/virsh.c:3874
#, fuzzy, c-format
msgid "Vol %s deleted\n"
msgstr "區域 %s 已經刪除\n"
#: src/virsh.c:3876
#, fuzzy, c-format
msgid "Failed to delete vol %s"
msgstr "無法刪除區域 %s"
#: src/virsh.c:3890
#, fuzzy
msgid "storage vol information"
msgstr "節點資訊"
#: src/virsh.c:3891
#, fuzzy
msgid "Returns basic information about the storage vol."
msgstr "傳回節點的基本資訊。"
#: src/virsh.c:3919
#, fuzzy
msgid "Type:"
msgstr "作業系統類型:"
#: src/virsh.c:3921
msgid "file"
msgstr ""
#: src/virsh.c:3921
#, fuzzy
msgid "block"
msgstr "以組絕"
#: src/virsh.c:3942
#, fuzzy
msgid "vol information in XML"
msgstr "XML 格式的區域資訊"
#: src/virsh.c:3943
#, fuzzy
msgid "Output the vol information as an XML dump to stdout."
msgstr "將區域資訊以 XML 格式輸出到螢幕上。"
#: src/virsh.c:3984
#, fuzzy
msgid "list vols"
msgstr "列出區域"
#: src/virsh.c:3985
#, fuzzy
msgid "Returns list of vols by pool."
msgstr "傳回區域清單。"
#: src/virsh.c:4010 src/virsh.c:4018
#, fuzzy
msgid "Failed to list active vols"
msgstr "無法列出運作中的區域"
#: src/virsh.c:4026
msgid "Path"
msgstr ""
#: src/virsh.c:4063
#, fuzzy
msgid "convert a vol UUID to vol name"
msgstr "將網路 id 或 UUID 轉為網路名稱"
#: src/virsh.c:4068
msgid "vol key or path"
msgstr ""
#: src/virsh.c:4096
#, fuzzy
msgid "convert a vol UUID to vol key"
msgstr "將網路 id 或 UUID 轉為網路名稱"
#: src/virsh.c:4101
#, fuzzy
msgid "vol uuid"
msgstr "區域的 uuid"
#: src/virsh.c:4129
#, fuzzy
msgid "convert a vol UUID to vol path"
msgstr "將網路 id 或 UUID 轉為網路名稱"
#: src/virsh.c:4135
msgid "vol name or key"
msgstr ""
#: src/virsh.c:4166
msgid "show version"
msgstr "顯示版本"
#: src/virsh.c:4167
msgid "Display the system version information."
msgstr "顯示系統版本的資訊。"
#: src/virsh.c:4190
msgid "failed to get hypervisor type"
msgstr "無法取得 hypervisor 類型"
#: src/virsh.c:4199
#, c-format
msgid "Compiled against library: libvir %d.%d.%d\n"
msgstr "用此函式庫來編譯libvir %d.%d.%d\n"
#: src/virsh.c:4204
msgid "failed to get the library version"
msgstr "無法取得函式庫的版本"
#: src/virsh.c:4211
#, c-format
msgid "Using library: libvir %d.%d.%d\n"
msgstr "使用函式庫libvir %d.%d.%d\n"
#: src/virsh.c:4218
#, c-format
msgid "Using API: %s %d.%d.%d\n"
msgstr "使用 API%s %d.%d.%d\n"
#: src/virsh.c:4223
msgid "failed to get the hypervisor version"
msgstr "無法取得 hypervisor 的版本"
#: src/virsh.c:4228
#, c-format
msgid "Cannot extract running %s hypervisor version\n"
msgstr "無法解開執行中 %s hypervisor 的版本\n"
#: src/virsh.c:4235
#, c-format
msgid "Running hypervisor: %s %d.%d.%d\n"
msgstr "執行 hypervisor%s %d.%d.%d\n"
#: src/virsh.c:4246
#, fuzzy
msgid "print the hypervisor hostname"
msgstr "無法取得 hypervisor 類型"
#: src/virsh.c:4260
#, fuzzy
msgid "failed to get hostname"
msgstr "無法取得 hypervisor 類型"
#: src/virsh.c:4275
#, fuzzy
msgid "print the hypervisor canonical URI"
msgstr "hypervisor 連線的 URI"
#: src/virsh.c:4289
#, fuzzy
msgid "failed to get URI"
msgstr "無法取得區域 UUID"
#: src/virsh.c:4304
msgid "vnc display"
msgstr "vnc 顯示"
#: src/virsh.c:4305
#, fuzzy
msgid "Output the IP address and port number for the VNC display."
msgstr "為 VNC 顯示模式輸出 IP 位址與連接埠號。"
#: src/virsh.c:4380
msgid "tty console"
msgstr ""
#: src/virsh.c:4381
msgid "Output the device for the TTY console."
msgstr ""
#: src/virsh.c:4441
#, fuzzy
msgid "attach device from an XML file"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:4442
#, fuzzy
msgid "Attach device from an XML <file>."
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:4448 src/virsh.c:4505
msgid "XML file"
msgstr ""
#: src/virsh.c:4469
msgid "attach-device: Missing <file> option"
msgstr ""
#: src/virsh.c:4483
#, fuzzy, c-format
msgid "Failed to attach device from %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:4498
#, fuzzy
msgid "detach device from an XML file"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:4499
#, fuzzy
msgid "Detach device from an XML <file>"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:4526
msgid "detach-device: Missing <file> option"
msgstr ""
#: src/virsh.c:4540
#, fuzzy, c-format
msgid "Failed to detach device from %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:4555
#, fuzzy
msgid "attach network interface"
msgstr "網路名稱"
#: src/virsh.c:4556
msgid "Attach new network interface."
msgstr ""
#: src/virsh.c:4562 src/virsh.c:4676
#, fuzzy
msgid "network interface type"
msgstr "網路名稱"
#: src/virsh.c:4563
#, fuzzy
msgid "source of network interface"
msgstr "未定義的網路名稱"
#: src/virsh.c:4564
#, fuzzy
msgid "target network name"
msgstr "網路名稱"
#: src/virsh.c:4565 src/virsh.c:4677
#, fuzzy
msgid "MAC address"
msgstr "無效的參數,於 %s"
#: src/virsh.c:4566
msgid "script used to bridge network interface"
msgstr ""
#: src/virsh.c:4598
#, c-format
msgid "No support %s in command 'attach-interface'"
msgstr ""
#: src/virsh.c:4669
#, fuzzy
msgid "detach network interface"
msgstr "網路名稱"
#: src/virsh.c:4670
msgid "Detach network interface."
msgstr ""
#: src/virsh.c:4715 src/virsh.c:4720
#, fuzzy
msgid "Failed to get interface information"
msgstr "無法取得節點資訊"
#: src/virsh.c:4728
#, c-format
msgid "No found interface whose type is %s"
msgstr ""
#: src/virsh.c:4750
#, c-format
msgid "No found interface whose MAC address is %s"
msgstr ""
#: src/virsh.c:4756 src/virsh.c:5030
#, fuzzy
msgid "Failed to allocate memory"
msgstr "無法分配節點"
#: src/virsh.c:4761 src/virsh.c:5035
#, fuzzy
msgid "Failed to create XML"
msgstr "無法讀取插槽 %d\n"
#: src/virsh.c:4788
msgid "attach disk device"
msgstr ""
#: src/virsh.c:4789
msgid "Attach new disk device."
msgstr ""
#: src/virsh.c:4795
msgid "source of disk device"
msgstr ""
#: src/virsh.c:4796 src/virsh.c:4958
msgid "target of disk device"
msgstr ""
#: src/virsh.c:4797
msgid "driver of disk device"
msgstr ""
#: src/virsh.c:4798
msgid "subdriver of disk device"
msgstr ""
#: src/virsh.c:4799
msgid "target device type"
msgstr ""
#: src/virsh.c:4800
msgid "mode of device reading and writing"
msgstr ""
#: src/virsh.c:4831 src/virsh.c:4840 src/virsh.c:4847
#, c-format
msgid "No support %s in command 'attach-disk'"
msgstr ""
#: src/virsh.c:4951
msgid "detach disk device"
msgstr ""
#: src/virsh.c:4952
msgid "Detach disk device."
msgstr ""
#: src/virsh.c:4993 src/virsh.c:4998 src/virsh.c:5005
#, fuzzy
msgid "Failed to get disk information"
msgstr "無法取得節點資訊"
#: src/virsh.c:5024
#, c-format
msgid "No found disk whose target is %s"
msgstr ""
#: src/virsh.c:5062
msgid "quit this interactive terminal"
msgstr "離開這互動式的終端機"
#: src/virsh.c:5233
#, c-format
msgid "command '%s' requires <%s> option"
msgstr "「%s」指令需要 <%s> 選項"
#: src/virsh.c:5234
#, c-format
msgid "command '%s' requires --%s option"
msgstr "「%s」指令需要 --%s 選項"
#: src/virsh.c:5261
#, c-format
msgid "command '%s' doesn't exist"
msgstr "「%s」指令不存在"
#: src/virsh.c:5269
msgid " NAME\n"
msgstr " 名稱\n"
#: src/virsh.c:5273
#, fuzzy
msgid ""
"\n"
" SYNOPSIS\n"
msgstr ""
"\n"
" 選項\n"
#: src/virsh.c:5280
msgid ""
"\n"
" DESCRIPTION\n"
msgstr ""
"\n"
" 描述\n"
#: src/virsh.c:5284
msgid ""
"\n"
" OPTIONS\n"
msgstr ""
"\n"
" 選項\n"
#: src/virsh.c:5291
#, c-format
msgid "--%s <number>"
msgstr "--%s <number>"
#: src/virsh.c:5293
#, c-format
msgid "--%s <string>"
msgstr "--%s <string>"
#: src/virsh.c:5437
msgid "undefined domain name or id"
msgstr "未定義的區域名稱或 id"
#: src/virsh.c:5469
#, c-format
msgid "failed to get domain '%s'"
msgstr "無法取得區域「%s」"
#: src/virsh.c:5482
msgid "undefined network name"
msgstr "未定義的網路名稱"
#: src/virsh.c:5506
#, c-format
msgid "failed to get network '%s'"
msgstr "無法取得網路「%s」"
#: src/virsh.c:5519 src/virsh.c:5565
#, fuzzy
msgid "undefined pool name"
msgstr "未定義的網路名稱"
#: src/virsh.c:5543
#, fuzzy, c-format
msgid "failed to get pool '%s'"
msgstr "無法取得區域「%s」"
#: src/virsh.c:5560
#, fuzzy
msgid "undefined vol name"
msgstr "未定義的網路名稱"
#: src/virsh.c:5596
#, fuzzy, c-format
msgid "failed to get vol '%s'"
msgstr "無法取得區域「%s」"
#: src/virsh.c:5627
#, c-format
msgid ""
"\n"
"(Time: %.3f ms)\n"
"\n"
msgstr ""
"\n"
"(時間:%.3f 毫秒)\n"
"\n"
#: src/virsh.c:5701
msgid "missing \""
msgstr "找不到 \""
#: src/virsh.c:5762
#, c-format
msgid "unexpected token (command name): '%s'"
msgstr "無預期的 token指令名稱「%s」"
#: src/virsh.c:5767
#, c-format
msgid "unknown command: '%s'"
msgstr "未知的指令:「%s」"
#: src/virsh.c:5774
#, c-format
msgid "command '%s' doesn't support option --%s"
msgstr "「%s」指令並不支援 --%s 選項"
#: src/virsh.c:5789
#, c-format
msgid "expected syntax: --%s <%s>"
msgstr "語法:--%s <%s>"
#: src/virsh.c:5792
msgid "number"
msgstr "數量"
#: src/virsh.c:5792
msgid "string"
msgstr "字串"
#: src/virsh.c:5798
#, c-format
msgid "unexpected data '%s'"
msgstr "無預期的資料「%s」"
#: src/virsh.c:5820
msgid "OPTION"
msgstr "選項"
#: src/virsh.c:5820
msgid "DATA"
msgstr "資料"
#: src/virsh.c:5871 src/virsh.c:5893
msgid "blocked"
msgstr "以組絕"
#: src/virsh.c:5873
msgid "paused"
msgstr "已暫停"
#: src/virsh.c:5875
msgid "in shutdown"
msgstr "關機中"
#: src/virsh.c:5877
msgid "shut off"
msgstr "關機"
#: src/virsh.c:5879
msgid "crashed"
msgstr "當機"
#: src/virsh.c:5891
msgid "offline"
msgstr "離線"
#: src/virsh.c:5910
msgid "no valid connection"
msgstr "沒有有效的連線"
#: src/virsh.c:5957
#, c-format
msgid "%s: error: "
msgstr "%s錯誤"
#: src/virsh.c:5959
msgid "error: "
msgstr "錯誤:"
#: src/virsh.c:5981 src/virsh.c:5993 src/virsh.c:6006
#, c-format
msgid "%s: %d: failed to allocate %d bytes"
msgstr "%s%d無法分配 %d 位元組"
#: src/virsh.c:6020
#, c-format
msgid "%s: %d: failed to allocate %lu bytes"
msgstr "%s%d無法分配 %lu 位元組"
#: src/virsh.c:6049
msgid "failed to connect to the hypervisor"
msgstr "無法連上 hypervisor"
#: src/virsh.c:6081
#, fuzzy
msgid "failed to get the log file information"
msgstr "無法取得節點資訊"
#: src/virsh.c:6086
msgid "the log path is not a file"
msgstr ""
#: src/virsh.c:6093
msgid "failed to open the log file. check the log file path"
msgstr ""
#: src/virsh.c:6161
#, fuzzy
msgid "failed to write the log file"
msgstr "無法寫入設定檔"
#: src/virsh.c:6176
#, fuzzy, c-format
msgid "%s: failed to write log file: %s"
msgstr "無法寫入設定檔"
#: src/virsh.c:6353
#, fuzzy
msgid "failed to disconnect from the hypervisor"
msgstr "無法從 hypervisor 處斷線"
#: src/virsh.c:6371
#, fuzzy, c-format
msgid ""
"\n"
"%s [options] [commands]\n"
"\n"
" options:\n"
" -c | --connect <uri> hypervisor connection URI\n"
" -r | --readonly connect readonly\n"
" -d | --debug <num> debug level [0-5]\n"
" -h | --help this help\n"
" -q | --quiet quiet mode\n"
" -t | --timing print timing information\n"
" -l | --log <file> output logging to file\n"
" -v | --version program version\n"
"\n"
" commands (non interactive mode):\n"
msgstr ""
"\n"
"%s [選項] [命令]\n"
"\n"
" 選項:\n"
" -c | --connect <uri> hypervisor 連線的 URI\n"
" -r | --readonly 用唯讀方式連線\n"
" -d | --debug <num> 偵錯等級 [0-5]\n"
" -h | --help 本求助畫面\n"
" -q | --quiet 安靜模式\n"
" -t | --timing 列印時間訊息\n"
" -v | --version 程式版本\n"
"\n"
" 命令(非互動式模式):\n"
#: src/virsh.c:6389
#, fuzzy
msgid ""
"\n"
" (specify help <command> for details about the command)\n"
"\n"
msgstr ""
"\n"
" (請使用 --help <指令> 以取得關於指令的詳細資料)\n"
"\n"
#: src/virsh.c:6485
#, c-format
msgid "unsupported option '-%c'. See --help."
msgstr "不支援的選項「-%c」。請參閱 --help。"
#: src/virsh.c:6571
#, c-format
msgid ""
"Welcome to %s, the virtualization interactive terminal.\n"
"\n"
msgstr ""
"歡迎使用 %s - 虛擬化的互動模式終端機。\n"
"\n"
#: src/virsh.c:6574
msgid ""
"Type: 'help' for help with commands\n"
" 'quit' to quit\n"
"\n"
msgstr ""
"類型: 「help」以取得指令的求助畫面\n"
" 「quit」離開\n"
"\n"
#: src/virterror.c:243
msgid "warning"
msgstr "警告"
#: src/virterror.c:246
msgid "error"
msgstr "錯誤"
#: src/virterror.c:375
msgid "No error message provided"
msgstr "無法提供錯誤訊息"
#: src/virterror.c:430
#, c-format
msgid "internal error %s"
msgstr "內部錯誤 %s"
#: src/virterror.c:432
msgid "internal error"
msgstr "內部錯誤"
#: src/virterror.c:439
#, fuzzy
msgid "this function is not supported by the hypervisor"
msgstr "不支援 hypervisor"
#: src/virterror.c:441
#, fuzzy, c-format
msgid "this function is not supported by the hypervisor: %s"
msgstr "不支援 hypervisor %s"
#: src/virterror.c:445
msgid "could not connect to hypervisor"
msgstr "無法連上 hypervisor"
#: src/virterror.c:447
#, c-format
msgid "could not connect to %s"
msgstr "無法連上 %s"
#: src/virterror.c:451
msgid "invalid connection pointer in"
msgstr "無效的連線指標,於 "
#: src/virterror.c:453
#, c-format
msgid "invalid connection pointer in %s"
msgstr "無效的連線指標,於 %s"
#: src/virterror.c:457
msgid "invalid domain pointer in"
msgstr "無效的區域指標,於 "
#: src/virterror.c:459
#, c-format
msgid "invalid domain pointer in %s"
msgstr "無效的區域指標,於 %s"
#: src/virterror.c:463
msgid "invalid argument in"
msgstr "無效的參數,於 "
#: src/virterror.c:465
#, c-format
msgid "invalid argument in %s"
msgstr "無效的參數,於 %s"
#: src/virterror.c:469
#, c-format
msgid "operation failed: %s"
msgstr "操作失敗:%s"
#: src/virterror.c:471
msgid "operation failed"
msgstr "操作失敗"
#: src/virterror.c:475
#, c-format
msgid "GET operation failed: %s"
msgstr "GET 操作失敗:%s"
#: src/virterror.c:477
msgid "GET operation failed"
msgstr "GET 操作失敗"
#: src/virterror.c:481
#, c-format
msgid "POST operation failed: %s"
msgstr "POST 操作失敗:%s"
#: src/virterror.c:483
msgid "POST operation failed"
msgstr "POST 操作失敗"
#: src/virterror.c:486
#, c-format
msgid "got unknown HTTP error code %d"
msgstr "收到未知的 HTTP 錯誤碼 %d"
#: src/virterror.c:490
#, c-format
msgid "unknown host %s"
msgstr "未知的主機 %s"
#: src/virterror.c:492
msgid "unknown host"
msgstr "未知的主機"
#: src/virterror.c:496
#, c-format
msgid "failed to serialize S-Expr: %s"
msgstr "無法為 S-Expr 製作序列號:%s"
#: src/virterror.c:498
msgid "failed to serialize S-Expr"
msgstr "無法為 S-Expr 製作序列號"
#: src/virterror.c:502
msgid "could not use Xen hypervisor entry"
msgstr "無法使用 Xen hypervisor 項目"
#: src/virterror.c:504
#, c-format
msgid "could not use Xen hypervisor entry %s"
msgstr "無法使用 Xen hypervisor 項目 %s"
#: src/virterror.c:508
msgid "could not connect to Xen Store"
msgstr "無法連上 Xen Store"
#: src/virterror.c:510
#, c-format
msgid "could not connect to Xen Store %s"
msgstr "無法連上 Xen Store %s"
#: src/virterror.c:513
#, c-format
msgid "failed Xen syscall %s %d"
msgstr "Xen syscall %s %d 失敗"
#: src/virterror.c:517
msgid "unknown OS type"
msgstr "未知的作業系統類型"
#: src/virterror.c:519
#, c-format
msgid "unknown OS type %s"
msgstr "未知的作業系統類型 %s"
#: src/virterror.c:522
msgid "missing kernel information"
msgstr "找不到核心資訊"
#: src/virterror.c:526
msgid "missing root device information"
msgstr "找不到 root 裝置的資訊"
#: src/virterror.c:528
#, c-format
msgid "missing root device information in %s"
msgstr "找不到 root 裝置的資訊,於 %s"
#: src/virterror.c:532
msgid "missing source information for device"
msgstr "找不到裝置的來源資訊"
#: src/virterror.c:534
#, c-format
msgid "missing source information for device %s"
msgstr "找不到裝置 %s 的來源資訊"
#: src/virterror.c:538
msgid "missing target information for device"
msgstr "找不到裝置的目標資訊"
#: src/virterror.c:540
#, c-format
msgid "missing target information for device %s"
msgstr "找不到 %s 裝置的目標資訊"
#: src/virterror.c:544
msgid "missing domain name information"
msgstr "找不到區域名稱的資訊"
#: src/virterror.c:546
#, c-format
msgid "missing domain name information in %s"
msgstr "找不到區域名稱的資訊,於 %s"
#: src/virterror.c:550
msgid "missing operating system information"
msgstr "找不到作業系統資訊"
#: src/virterror.c:552
#, c-format
msgid "missing operating system information for %s"
msgstr "找不到 %s 的作業系統資訊"
#: src/virterror.c:556
msgid "missing devices information"
msgstr "找不到裝置的資訊"
#: src/virterror.c:558
#, c-format
msgid "missing devices information for %s"
msgstr "找不到 %s 的裝置資訊"
#: src/virterror.c:562
msgid "too many drivers registered"
msgstr "註冊太多驅動程式"
#: src/virterror.c:564
#, c-format
msgid "too many drivers registered in %s"
msgstr "在 %s 中註冊太多驅動程式"
#: src/virterror.c:568
msgid "library call failed, possibly not supported"
msgstr "呼叫函式庫失敗,可能並不支援"
#: src/virterror.c:570
#, c-format
msgid "library call %s failed, possibly not supported"
msgstr "呼叫函式庫 %s 失敗,可能並不支援"
#: src/virterror.c:574
msgid "XML description not well formed or invalid"
msgstr "XML 的描述格式有誤"
#: src/virterror.c:576
#, c-format
msgid "XML description for %s is not well formed or invalid"
msgstr "%s 的 XML 描述之格式有誤"
#: src/virterror.c:580
msgid "this domain exists already"
msgstr "這個區域已經存在"
#: src/virterror.c:582
#, c-format
msgid "domain %s exists already"
msgstr "區域 %s 已經存在"
#: src/virterror.c:586
msgid "operation forbidden for read only access"
msgstr "唯讀時,禁止這操作"
#: src/virterror.c:588
#, c-format
msgid "operation %s forbidden for read only access"
msgstr "唯讀時,禁止 %s 操作"
#: src/virterror.c:592
msgid "failed to open configuration file for reading"
msgstr "無法開啟要讀取的設定檔"
#: src/virterror.c:594
#, c-format
msgid "failed to open %s for reading"
msgstr "無法開啟要讀取的 %s"
#: src/virterror.c:598
msgid "failed to read configuration file"
msgstr "無法讀取設定檔"
#: src/virterror.c:600
#, c-format
msgid "failed to read configuration file %s"
msgstr "無法讀取設定檔 %s"
#: src/virterror.c:604
msgid "failed to parse configuration file"
msgstr "無法解析設定檔"
#: src/virterror.c:606
#, c-format
msgid "failed to parse configuration file %s"
msgstr "無法解析設定檔 %s"
#: src/virterror.c:610
msgid "configuration file syntax error"
msgstr "設定檔語法錯誤"
#: src/virterror.c:612
#, c-format
msgid "configuration file syntax error: %s"
msgstr "設定檔語法錯誤:%s"
#: src/virterror.c:616
msgid "failed to write configuration file"
msgstr "無法寫入設定檔"
#: src/virterror.c:618
#, c-format
msgid "failed to write configuration file: %s"
msgstr "無法寫入設定檔:%s"
#: src/virterror.c:622
msgid "parser error"
msgstr "解析程式錯誤"
#: src/virterror.c:628
msgid "invalid network pointer in"
msgstr "無效的網路指標,於 "
#: src/virterror.c:630
#, c-format
msgid "invalid network pointer in %s"
msgstr "無效的網路指標,於 %s"
#: src/virterror.c:634
msgid "this network exists already"
msgstr "這個網路已經存在"
#: src/virterror.c:636
#, c-format
msgid "network %s exists already"
msgstr "網路 %s 已經存在"
#: src/virterror.c:640
msgid "system call error"
msgstr "系統呼叫錯誤"
#: src/virterror.c:646
#, fuzzy
msgid "RPC error"
msgstr "錯誤"
#: src/virterror.c:652
#, fuzzy
msgid "GNUTLS call error"
msgstr "系統呼叫錯誤"
#: src/virterror.c:658
#, fuzzy
msgid "Failed to find the network"
msgstr "無法為網路 %s 取消定義"
#: src/virterror.c:660
#, fuzzy, c-format
msgid "Failed to find the network: %s"
msgstr "無法為網路 %s 取消定義"
#: src/virterror.c:664
#, fuzzy
msgid "Domain not found"
msgstr "區域資訊"
#: src/virterror.c:666
#, fuzzy, c-format
msgid "Domain not found: %s"
msgstr "從 %s 回復區域\n"
#: src/virterror.c:670
#, fuzzy
msgid "Network not found"
msgstr "網路名稱或 uuid"
#: src/virterror.c:672
#, fuzzy, c-format
msgid "Network not found: %s"
msgstr "網路 %s 建立自 %s\n"
#: src/virterror.c:676
#, fuzzy
msgid "invalid MAC address"
msgstr "無效的參數,於 %s"
#: src/virterror.c:678
#, fuzzy, c-format
msgid "invalid MAC address: %s"
msgstr "無效的參數,於 %s"
#: src/virterror.c:682
#, fuzzy
msgid "authentication failed"
msgstr "操作失敗"
#: src/virterror.c:684
#, fuzzy, c-format
msgid "authentication failed: %s"
msgstr "操作失敗:%s"
#: src/virterror.c:688
#, fuzzy
msgid "Storage pool not found"
msgstr "網路名稱或 uuid"
#: src/virterror.c:690
#, fuzzy, c-format
msgid "Storage pool not found: %s"
msgstr "網路 %s 建立自 %s\n"
#: src/virterror.c:694
#, fuzzy
msgid "Storage volume not found"
msgstr "網路名稱或 uuid"
#: src/virterror.c:696
#, fuzzy, c-format
msgid "Storage volume not found: %s"
msgstr "網路 %s 建立自 %s\n"
#: src/virterror.c:700
#, fuzzy
msgid "invalid storage pool pointer in"
msgstr "無效的網路指標,於 "
#: src/virterror.c:702
#, fuzzy, c-format
msgid "invalid storage pool pointer in %s"
msgstr "無效的網路指標,於 %s"
#: src/virterror.c:706
#, fuzzy
msgid "invalid storage volume pointer in"
msgstr "無效的網路指標,於 "
#: src/virterror.c:708
#, fuzzy, c-format
msgid "invalid storage volume pointer in %s"
msgstr "無效的網路指標,於 %s"
#: src/virterror.c:712
#, fuzzy
msgid "Failed to find a storage driver"
msgstr "無法為網路 %s 取消定義"
#: src/virterror.c:714
#, fuzzy, c-format
msgid "Failed to find a storage driver: %s"
msgstr "無法為網路 %s 取消定義"
#: src/xen_internal.c:1326
#, c-format
msgid "Credit scheduler weight parameter (%d) is out of range (1-65535)"
msgstr ""
#: src/xen_internal.c:1336
#, c-format
msgid "Credit scheduler cap parameter (%d) is out of range (0-65535)"
msgstr ""
#: src/xen_internal.c:2502
#, c-format
msgid "allocating %d domain info"
msgstr "分配 %d 區域資訊"
#: src/xend_internal.c:246
#, fuzzy
msgid "failed to create a socket"
msgstr "無法分配節點"
#: src/xend_internal.c:268
#, fuzzy
msgid "failed to connect to xend"
msgstr "無法連上 Xen Store"
#: src/xend_internal.c:315 src/xend_internal.c:318
msgid "failed to read from Xen Daemon"
msgstr "無法從 Xen 系統程式讀取"
#: src/xend_internal.c:506
#, fuzzy, c-format
msgid "xend_get: error from xen daemon: %s"
msgstr "無法繼續區域 %s"
#: src/xend_internal.c:556 src/xend_internal.c:559 src/xend_internal.c:567
#, c-format
msgid "xend_post: error from xen daemon: %s"
msgstr ""
#: src/xend_internal.c:851 src/xend_internal.c:1818 src/xend_internal.c:1836
msgid "allocate new buffer"
msgstr "分配新的緩衝區"
#: src/xend_internal.c:1046
#, fuzzy, c-format
msgid "gethostbyname failed: %s"
msgstr "操作失敗:%s"
#: src/xend_internal.c:1167
msgid "failed to urlencode the create S-Expr"
msgstr "無法 urlencode 以建立 S-Expr"
#: src/xend_internal.c:1208
msgid "domain information incomplete, missing domid"
msgstr "區域的資訊不全,沒有 domid"
#: src/xend_internal.c:1214
msgid "domain information incorrect domid not numeric"
msgstr "區域的資訊不正確domid 並非數字型態"
#: src/xend_internal.c:1219 src/xend_internal.c:1266
msgid "domain information incomplete, missing uuid"
msgstr "區域的資訊不全,沒有 uuid"
#: src/xend_internal.c:1258 src/xend_internal.c:1988 src/xend_internal.c:1995
msgid "domain information incomplete, missing name"
msgstr "區域的資訊不全,沒有名稱"
#: src/xend_internal.c:1441
#, fuzzy
msgid "domain information incomplete, missing HVM loader"
msgstr "區域的資訊不全,沒有名稱"
#: src/xend_internal.c:1493
#, fuzzy
msgid "domain information incomplete, missing kernel & bootloader"
msgstr "區域的資訊不全,沒有核心"
#: src/xend_internal.c:1555
#, fuzzy
msgid "Unknown char device type"
msgstr "未知的作業系統類型"
#: src/xend_internal.c:1589 src/xend_internal.c:1629 src/xend_internal.c:1645
msgid "malformed char device string"
msgstr ""
#: src/xend_internal.c:1712
msgid "no memory for char device config"
msgstr ""
#: src/xend_internal.c:1788
msgid "domain information incomplete, vbd has no dev"
msgstr "區域的資訊不全vbd 沒有 dev"
#: src/xend_internal.c:1803
msgid "domain information incomplete, vbd has no src"
msgstr "區域的資訊不全vbd 沒有 src"
#: src/xend_internal.c:1812
msgid "cannot parse vbd filename, missing driver name"
msgstr "無法解析 vbd 檔名,找不到驅動程式名稱"
#: src/xend_internal.c:1830
msgid "cannot parse vbd filename, missing driver type"
msgstr "無法解析 vbd 檔名,找不到驅動程式類型"
#: src/xend_internal.c:1976
msgid "domain information incomplete, missing id"
msgstr "區域的資訊不全,沒有 id"
#: src/xend_internal.c:2288 src/xm_internal.c:1068
msgid "parsing soundhw string failed."
msgstr ""
#: src/xend_internal.c:2458
#, fuzzy
msgid "failed to parse topology information"
msgstr "無法解析 Xend 的區域資訊"
#: src/xend_internal.c:2512
#, fuzzy
msgid "topology syntax error"
msgstr "設定檔語法錯誤"
#: src/xend_internal.c:2576
msgid "failed to parse Xend domain information"
msgstr "無法解析 Xend 的區域資訊"
#: src/xend_internal.c:3056
msgid "xenDaemonDomainDumpXMLByID failed to find this domain"
msgstr ""
#: src/xend_internal.c:3081
msgid "xenDaemonDomainDumpXMLByName failed to find this domain"
msgstr ""
#: src/xend_internal.c:3696 src/xend_internal.c:4116
#, fuzzy
msgid "failed to parse domain description"
msgstr "無法解析 Xend 的區域資訊"
#: src/xend_internal.c:3842
msgid "xenDaemonGetAutostart failed to find this domain"
msgstr ""
#: src/xend_internal.c:3883
msgid "xenDaemonSetAutostart failed to find this domain"
msgstr ""
#: src/xend_internal.c:3891
#, fuzzy
msgid "unexpected value from on_xend_start"
msgstr "無預期的數值節點"
#: src/xend_internal.c:3902
#, fuzzy
msgid "no memory"
msgstr "節點的記憶體"
#: src/xend_internal.c:3908
#, fuzzy
msgid "sexpr2string failed"
msgstr "操作失敗"
#: src/xend_internal.c:3913
#, fuzzy
msgid "Failed to redefine sexpr"
msgstr "無法為區域 %s 取消定義"
#: src/xend_internal.c:3918
msgid "on_xend_start not present in sexpr"
msgstr ""
#: src/xend_internal.c:3949
#, fuzzy, c-format
msgid "gethostname failed: %s"
msgstr "操作失敗:%s"
#: src/xend_internal.c:3955
#, fuzzy, c-format
msgid "failed to strdup hostname: %s"
msgstr "無法取得 hypervisor 類型"
#: src/xend_internal.c:3986
msgid ""
"xenDaemonDomainMigrate: Xen does not support renaming domains during "
"migration"
msgstr ""
#: src/xend_internal.c:3996
msgid ""
"xenDaemonDomainMigrate: Xen does not support bandwidth limits during "
"migration"
msgstr ""
#: src/xend_internal.c:4008
msgid "xenDaemonDomainMigrate: unsupported flag"
msgstr ""
#: src/xend_internal.c:4021
msgid "xenDaemonDomainMigrate: invalid URI"
msgstr ""
#: src/xend_internal.c:4026
msgid "xenDaemonDomainMigrate: only xenmigr:// migrations are supported by Xen"
msgstr ""
#: src/xend_internal.c:4033
msgid "xenDaemonDomainMigrate: a hostname must be specified in the URI"
msgstr ""
#: src/xend_internal.c:4040 src/xend_internal.c:4062 src/xend_internal.c:4070
#: src/xend_internal.c:4298 src/xend_internal.c:4305 src/xml.c:405
msgid "strdup failed"
msgstr ""
#: src/xend_internal.c:4053
msgid "xenDaemonDomainMigrate: invalid port number"
msgstr ""
#: src/xend_internal.c:4126
#, c-format
msgid "Failed to create inactive domain %s\n"
msgstr "無法建立非運作中的區域 %s\n"
#: src/xend_internal.c:4280 src/xend_internal.c:4356 src/xend_internal.c:4446
msgid "unsupported in xendConfigVersion < 4"
msgstr ""
#: src/xend_internal.c:4292
#, fuzzy
msgid "node information incomplete, missing scheduler name"
msgstr "區域的資訊不全,沒有名稱"
#: src/xend_internal.c:4310 src/xend_internal.c:4404 src/xend_internal.c:4516
#, fuzzy
msgid "Unknown scheduler"
msgstr "未知的主機"
#: src/xend_internal.c:4369 src/xend_internal.c:4459
#, fuzzy
msgid "Failed to get a scheduler name"
msgstr "無法取得 hypervisor 類型"
#: src/xend_internal.c:4382 src/xend_internal.c:4495
#, fuzzy
msgid "domain information incomplete, missing cpu_weight"
msgstr "區域的資訊不全,沒有 uuid"
#: src/xend_internal.c:4387 src/xend_internal.c:4504
#, fuzzy
msgid "domain information incomplete, missing cpu_cap"
msgstr "區域的資訊不全,沒有 uuid"
#: src/xend_internal.c:4584
msgid "domainBlockPeek is not supported for dom0"
msgstr ""
#: src/xend_internal.c:4603
#, fuzzy, c-format
msgid "%s: invalid path"
msgstr "無效的參數,於 %s"
#: src/xend_internal.c:4611
#, fuzzy, c-format
msgid "failed to open for reading: %s: %s"
msgstr "無法開啟要讀取的 %s"
#: src/xend_internal.c:4623
#, fuzzy, c-format
msgid "failed to lseek or read from file: %s: %s"
msgstr "無法暫停區域 %s"
#: src/xm_internal.c:435
msgid "xenXMConfigCacheRefresh: name"
msgstr ""
#: src/xm_internal.c:446
msgid "xenXMConfigCacheRefresh: virHashAddEntry"
msgstr ""
#: src/xm_internal.c:1306
#, fuzzy
msgid "read only connection"
msgstr "唯讀的連線"
#: src/xm_internal.c:1311
#, fuzzy
msgid "not inactive domain"
msgstr "列出非作用中的區域"
#: src/xm_internal.c:1316
msgid "virHashLookup"
msgstr ""
#: src/xm_internal.c:1321
#, fuzzy
msgid "can't retrieve config file for domain"
msgstr "無法寫入設定檔:%s"
#: src/xm_internal.c:1947 src/xm_internal.c:2675 src/xm_internal.c:2697
#: src/xm_internal.c:3094
#, fuzzy
msgid "cannot read XML domain definition"
msgstr "載入區域定義檔"
#: src/xm_internal.c:1953
#, fuzzy
msgid "missing top level domain element"
msgstr "找不到 root 裝置的資訊"
#: src/xm_internal.c:1961
#, fuzzy
msgid "domain type is invalid"
msgstr "區域 %s 已經存在"
#: src/xm_internal.c:1969 src/xm_internal.c:2680 src/xm_internal.c:2702
#: src/xm_internal.c:3099
#, fuzzy
msgid "cannot create XPath context"
msgstr "建立 xpath 的內文"
#: src/xm_internal.c:2161 src/xm_internal.c:2235 src/xm_internal.c:2256
#: src/xm_internal.c:2272 src/xm_internal.c:2291 src/xm_internal.c:2306
#: src/xm_internal.c:2479
msgid "config"
msgstr ""
#: src/xm_internal.c:2417
msgid "name config parameter is missing"
msgstr ""
#: src/xm_internal.c:2426
msgid "can't retrieve config filename for domain to overwrite"
msgstr ""
#: src/xm_internal.c:2432
msgid "can't retrieve config entry for domain to overwrite"
msgstr ""
#: src/xm_internal.c:2438 src/xm_internal.c:2494
msgid "uuid config parameter is missing"
msgstr ""
#: src/xm_internal.c:2448 src/xm_internal.c:2455
#, fuzzy
msgid "failed to remove old domain from config map"
msgstr "無法從 %s 回復區域"
#: src/xm_internal.c:2464
msgid "config file name is too long"
msgstr ""
#: src/xm_internal.c:2474
#, fuzzy
msgid "unable to write config file"
msgstr "無法寫入設定檔"
#: src/xm_internal.c:2485
#, fuzzy
msgid "unable to get current time"
msgstr "區域目前的記憶體"
#: src/xm_internal.c:2500 src/xm_internal.c:2507
#, fuzzy
msgid "unable to store config file handle"
msgstr "無法讀取設定檔 %s"
#: src/xm_internal.c:2714
#, fuzzy
msgid "unknown device"
msgstr "未知的作業系統類型"
#: src/xml.c:248
msgid "topology cpuset syntax error"
msgstr ""
#: src/xml.c:314
#, fuzzy
msgid "failed to allocate sound string"
msgstr "無法分配節點"
#: src/xml.c:328
msgid "no model for sound device"
msgstr ""
#: src/xml.c:334
#, fuzzy
msgid "unknown sound model type"
msgstr "未知的作業系統類型 %s"
#: src/xml.c:393
msgid "Invalid parameter to virXPathString()"
msgstr ""
#: src/xml.c:428 src/xml.c:463
msgid "Invalid parameter to virXPathNumber()"
msgstr ""
#: src/xml.c:509
msgid "Invalid parameter to virXPathBoolean()"
msgstr ""
#: src/xml.c:542
msgid "Invalid parameter to virXPathNode()"
msgstr ""
#: src/xml.c:578
msgid "Invalid parameter to virXPathNodeSet()"
msgstr ""
#: src/xml.c:595 src/xmlrpc.c:479
msgid "allocate string array"
msgstr "分配字串陣列"
#: src/xml.c:966
#, fuzzy
msgid "too many boot devices"
msgstr "過多區域"
#: src/xml.c:998
#, fuzzy
msgid "no HVM domain loader"
msgstr "節點的區域清單"
#: src/xml.c:1091 src/xml.c:1108
#, fuzzy
msgid "invalid input device"
msgstr "無效的區域指標,於 "
#: src/xmlrpc.c:53
#, fuzzy
msgid "allocate value"
msgstr "分配數值陣列"
#: src/xmlrpc.c:65
msgid "copying node content"
msgstr "複製節點內容"
#: src/xmlrpc.c:162
msgid "allocate value array"
msgstr "分配數值陣列"
#: src/xmlrpc.c:185
#, fuzzy
msgid "allocate dict"
msgstr "分配新的內文"
#: src/xmlrpc.c:196
msgid "unexpected dict node"
msgstr "無預期的 dict 節點"
#: src/xmlrpc.c:267
msgid "unexpected value node"
msgstr "無預期的數值節點"
#: src/xmlrpc.c:427
msgid "send request"
msgstr "發送要求"
#: src/xmlrpc.c:433
msgid "unexpected mime type"
msgstr "無預期的 mime 類型"
#: src/xmlrpc.c:439
msgid "allocate response"
msgstr "分配回應"
#: src/xmlrpc.c:447 src/xmlrpc.c:509
msgid "read response"
msgstr "讀取回應"
#: src/xmlrpc.c:602
msgid "parse server response failed"
msgstr "無法解析伺服器的回應"
#: src/xmlrpc.c:663
msgid "allocate new context"
msgstr "分配新的內文"
#: src/xs_internal.c:329
msgid "failed to connect to Xen Store"
msgstr "無法連上 Xen Store"
#, fuzzy
#~ msgid "Failed to find the sysfs path for %d:%d:%d:%d: %s"
#~ msgstr "無法為網路 %s 取消定義"
#, fuzzy
#~ msgid "Failed to find SCSI device for %d:%d:%d:%d: %s"
#~ msgstr "無法為網路 %s 取消定義"
#, fuzzy
#~ msgid "out of memory allocating return array"
#~ msgstr "改變記憶體分配"
#, fuzzy
#~ msgid "cannot allocate address"
#~ msgstr "分配回應"
#, fuzzy
#~ msgid "poll returned error: %s"
#~ msgstr "內部錯誤 %s"
#, fuzzy
#~ msgid "cannot allocate memory for buffer"
#~ msgstr "分配新的緩衝區"
#, fuzzy
#~ msgid "Failed to bring down bridge '%s' : %s\n"
#~ msgstr "無法暫停區域 %s"
#, fuzzy
#~ msgid "Failed to open '%s': read: %s"
#~ msgstr "無法開啟要讀取的 %s"
#~ msgid "growing buffer"
#~ msgstr "增加中的緩衝區"
#~ msgid "allocate buffer content"
#~ msgstr "分配緩衝區內容"
#~ msgid "file conatining an XML domain description"
#~ msgstr "包含 XML 區域描述的檔案"
#~ msgid "Xen Daemon or Xen Store"
#~ msgstr "Xen Daemon 或 Xen Store"
#~ msgid "file conatining an XML network description"
#~ msgstr "包含 XML 網路描述的檔案"