Osier Yang cdb9789559 conf: Generate address for scsi host device automatically ...

With unknown good reasons, the attribute "bus" of scsi device
address is always set to 0, same for attribute "target". (See
virDomainDiskDefAssignAddress).

Though we might need to change the algorithm to honor "bus"
and "target" too, that's a different issue. The address generator
for scsi host device in this patch just follows the unknown
good reasons, only considering the "controller" and "unit".
It walks through all scsi controllers and their units, to see
if the address $controller:0:0:$unit can be used (if not used
by any disk or scsi host device yet), if found one, it sits on
it, otherwise, it creates a new controller (actually the controller
is implicitly created by someone else), and sits on
$new_controller:0:0:0 instead.

2013-06-01 10:00:23 +08:00

..

qemuxml2argv-balloon-device-auto.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-balloon-device-auto.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-balloon-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-balloon-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-bios.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-bios.xml

test: Don't assume VNC is always available

2012-10-22 23:16:11 +08:00

qemuxml2argv-blkdeviotune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-blkdeviotune.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-blkiotune-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-blkiotune-device.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-blkiotune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-blkiotune.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-boot-cdrom.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-cdrom.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-boot-complex-bootindex.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-complex-bootindex.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-complex.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-complex.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-dev+order.xml

conf: add test for boot dev and order

2012-10-16 12:25:32 +02:00

qemuxml2argv-boot-floppy.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-floppy.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-boot-menu-disable-drive-bootindex.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-menu-disable-drive-bootindex.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-menu-disable-drive.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-menu-disable-drive.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-menu-disable.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-menu-disable.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-boot-menu-enable.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-menu-enable.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-multi.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-multi.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-boot-network.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-network.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-boot-order.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-order.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-bootloader.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-bootloader.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-channel-guestfwd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-guestfwd.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-channel-spicevmc-old.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-spicevmc-old.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-channel-spicevmc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-spicevmc.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-channel-virtio-auto.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-virtio-auto.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-channel-virtio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-virtio.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-clock-france.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-clock-france.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-clock-localtime.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-clock-localtime.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-clock-utc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-clock-utc.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-clock-variable.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-clock-variable.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-console-compat-auto.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-compat-auto.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-console-compat-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-compat-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-console-compat.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-compat.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-console-sclp.args

S390: Do not generate a default USB controller

2013-04-30 19:18:43 -06:00

qemuxml2argv-console-sclp.xml

S390: Enable SCLP Console in QEMU driver

2013-01-08 11:37:52 +01:00

qemuxml2argv-console-virtio-ccw.args

S390: Do not generate a default USB controller

2013-04-30 19:18:43 -06:00

qemuxml2argv-console-virtio-ccw.xml

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-console-virtio-many.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-virtio-many.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-console-virtio-s390.args

S390: Do not generate a default USB controller

2013-04-30 19:18:43 -06:00

qemuxml2argv-console-virtio-s390.xml

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-console-virtio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-virtio.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-controller-order.args

qemu: Improve handling of channels when generating SPICE command line

2013-04-24 14:37:57 +02:00

qemuxml2argv-controller-order.xml

tests: Add test for controller order

2012-11-06 10:11:35 +01:00

qemuxml2argv-cpu-eoi-disabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-eoi-disabled.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-cpu-eoi-enabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-eoi-enabled.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-cpu-exact1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-exact1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-exact2-nofallback.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-exact2-nofallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-exact2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-exact2.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-fallback.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-fallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-kvmclock.args

qemu: Move -enable-kvm and friends earlier in the command line

2013-04-23 21:19:35 +02:00

qemuxml2argv-cpu-host-kvmclock.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-cpu-host-model-fallback.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-host-model-fallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-model-nofallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-model.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-host-model.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-passthrough.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-host-passthrough.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-kvmclock.args

qemu: Move -enable-kvm and friends earlier in the command line

2013-04-23 21:19:35 +02:00

qemuxml2argv-cpu-kvmclock.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-cpu-minimum1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-minimum1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-minimum2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-minimum2.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-nofallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-numa1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-numa1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-numa2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-numa2.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-qemu-host-passthrough.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-strict1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-strict1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-topology1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-topology1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-topology2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-topology2.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-topology3.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-topology3.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cputune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cputune.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-aio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-aio.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-blockio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-blockio.xml

Rename iolimit to blockio.

2012-09-04 09:14:36 -06:00

qemuxml2argv-disk-cdrom-empty.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-cdrom-empty.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-disk-cdrom-tray-no-device-cap.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-cdrom-tray-no-device-cap.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-cdrom-tray.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-cdrom-tray.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-cdrom.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-cdrom.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-disk-copy_on_read.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-copy_on_read.xml

conf: Fix the bug of disk->copy_on_read formating

2013-05-16 23:07:51 +08:00

qemuxml2argv-disk-drive-boot-cdrom.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-boot-cdrom.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-disk-drive-boot-disk.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-boot-disk.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-disk-drive-cache-directsync.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-directsync.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-unsafe.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-unsafe.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-v1-none.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v1-none.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-v1-wb.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v1-wb.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-v1-wt.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v1-wt.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-v2-none.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v2-none.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-v2-wb.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v2-wb.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-v2-wt.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v2-wt.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-discard.args

qemu: Change values of disk discard

2013-05-17 13:03:25 +08:00

qemuxml2argv-disk-drive-discard.xml

qemu: Change values of disk discard

2013-05-17 13:03:25 +08:00

qemuxml2argv-disk-drive-error-policy-enospace.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-error-policy-enospace.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-error-policy-stop.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-error-policy-stop.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-error-policy-wreport-rignore.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-error-policy-wreport-rignore.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-fat.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-fat.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-fmt-qcow.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-fmt-qcow.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-gluster.args

qemu: add support for libiscsi

2013-03-22 12:10:22 +08:00

qemuxml2argv-disk-drive-network-gluster.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-iscsi-auth.args

qemu: pass iscsi authorization credentials

2013-03-22 12:10:23 +08:00

qemuxml2argv-disk-drive-network-iscsi-auth.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-iscsi-lun.args

qemu: support passthrough for iscsi disks

2013-03-22 12:10:23 +08:00

qemuxml2argv-disk-drive-network-iscsi-lun.xml

qemu: support passthrough for iscsi disks

2013-03-22 12:10:23 +08:00

qemuxml2argv-disk-drive-network-iscsi.args

qemu: add support for libiscsi

2013-03-22 12:10:22 +08:00

qemuxml2argv-disk-drive-network-iscsi.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-nbd-export.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-nbd-export.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-nbd-ipv6-export.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-nbd-ipv6-export.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-nbd-ipv6.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-nbd-ipv6.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-nbd-unix.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-nbd-unix.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-nbd.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-nbd.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-rbd-auth.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-rbd-auth.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-network-rbd-ceph-env.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-network-rbd-ceph-env.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-disk-drive-network-rbd-ipv6.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-rbd-ipv6.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-rbd-no-colon.xml

Rename rbd-invalid.xml to rbd-no-colon.xml

2013-05-14 20:09:48 +01:00

qemuxml2argv-disk-drive-network-rbd.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-rbd.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-sheepdog.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-sheepdog.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-no-boot.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-no-boot.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-readonly-disk.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-readonly-disk.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-readonly-no-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-readonly-no-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-shared.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-shared.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-floppy-tray-no-device-cap.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-floppy-tray-no-device-cap.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-floppy-tray.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-floppy-tray.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-floppy.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-floppy.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-disk-geometry.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-geometry.xml

qemu: Disk Geometry Override Support

2012-08-21 15:35:48 -06:00

qemuxml2argv-disk-ide-drive-split.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-ide-drive-split.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-ide-wwn.args

qemu: Allow the disk wwn to have "0x" prefix

2013-04-17 23:05:56 +08:00

qemuxml2argv-disk-ide-wwn.xml

qemu: Use disk wwn in qemu command line

2012-09-18 15:00:01 +08:00

qemuxml2argv-disk-ioeventfd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-ioeventfd.xml

test: Don't assume VNC is always available

2012-10-22 23:16:11 +08:00

qemuxml2argv-disk-many.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-many.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-disk-mirror.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-order.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-order.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-sata-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-sata-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-device-auto.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-device-auto.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-device.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-scsi-disk-split.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-disk-split.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-disk-vpd-build-error.xml

qemu: Allow the user to specify vendor and product for disk

2012-12-07 16:53:27 +08:00

qemuxml2argv-disk-scsi-disk-vpd.args

qemu: Allow the user to specify vendor and product for disk

2012-12-07 16:53:27 +08:00

qemuxml2argv-disk-scsi-disk-vpd.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-scsi-disk-wwn.args

qemu: Allow the disk wwn to have "0x" prefix

2013-04-17 23:05:56 +08:00

qemuxml2argv-disk-scsi-disk-wwn.xml

qemu: Allow the disk wwn to have "0x" prefix

2013-04-17 23:05:56 +08:00

qemuxml2argv-disk-scsi-lun-passthrough-sgio.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-scsi-lun-passthrough.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-lun-passthrough.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-megasas.args

qemu: add support for LSI MegaRAID SAS1078 (aka megasas) SCSI controller

2013-03-22 12:11:14 +08:00

qemuxml2argv-disk-scsi-megasas.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-scsi-virtio-scsi.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-virtio-scsi.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-scsi-vscsi.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-vscsi.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-snapshot.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-snapshot.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-source-pool.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-transient.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-usb-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-usb-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-usb.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-usb.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-disk-virtio-ccw-many.args

S390: Do not generate a default USB controller

2013-04-30 19:18:43 -06:00

qemuxml2argv-disk-virtio-ccw-many.xml

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-disk-virtio-ccw.args

S390: Do not generate a default USB controller

2013-04-30 19:18:43 -06:00

qemuxml2argv-disk-virtio-ccw.xml

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-disk-virtio-s390.args

S390: Do not generate a default USB controller

2013-04-30 19:18:43 -06:00

qemuxml2argv-disk-virtio-s390.xml

S390: Adding testcases for s390

2012-07-11 11:19:05 +02:00

qemuxml2argv-disk-virtio-scsi-ccw.args

S390: Do not generate a default USB controller

2013-04-30 19:18:43 -06:00

qemuxml2argv-disk-virtio-scsi-ccw.xml

S390: Testcases for virtio-scsi and virtio-rng

2013-03-14 15:53:20 -06:00

qemuxml2argv-disk-virtio-scsi-num_queues.args

qemu: Support multiple queue virtio-scsi

2013-04-06 10:08:47 +08:00

qemuxml2argv-disk-virtio-scsi-num_queues.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-virtio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-virtio.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-disk-xenvbd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-xenvbd.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-encrypted-disk.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-encrypted-disk.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-eoi-disabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-eoi-disabled.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-eoi-enabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-eoi-enabled.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-event_idx.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-event_idx.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-floppy-drive-fat.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-floppy-drive-fat.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-fs9p.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-fs9p.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-listen-network2.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-listen-network.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-sdl-fullscreen.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-sdl-fullscreen.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-graphics-sdl.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-sdl.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-graphics-spice-agentmouse.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-spice-agentmouse.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-spice-compression.args

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-graphics-spice-compression.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-spice-qxl-vga.args

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-graphics-spice-qxl-vga.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-spice-timeout.args

qemu: Improve handling of channels when generating SPICE command line

2013-04-24 14:37:57 +02:00

qemuxml2argv-graphics-spice-timeout.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-graphics-spice-usb-redir.args

domain_conf: add "usbredir" to list of valid spice channels

2012-05-08 09:22:45 -06:00

qemuxml2argv-graphics-spice-usb-redir.xml

domain_conf: add "usbredir" to list of valid spice channels

2012-05-08 09:22:45 -06:00

qemuxml2argv-graphics-spice.args

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-graphics-spice.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-vnc-policy.args

qemu: add ', share=<policy>' to qemu commandline

2013-05-22 19:18:48 +08:00

qemuxml2argv-graphics-vnc-policy.xml

qemu: add ', share=<policy>' to qemu commandline

2013-05-22 19:18:48 +08:00

qemuxml2argv-graphics-vnc-sasl.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-vnc-sasl.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-graphics-vnc-socket.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-vnc-socket.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-graphics-vnc-tls.args

Introduce a virQEMUDriverConfigPtr object

2013-02-05 15:49:25 +00:00

qemuxml2argv-graphics-vnc-tls.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-graphics-vnc-websocket.args

qemu: Add VNC WebSocket support

2013-05-15 09:48:05 +02:00

qemuxml2argv-graphics-vnc-websocket.xml

qemu: Add VNC WebSocket support

2013-05-15 09:48:05 +02:00

qemuxml2argv-graphics-vnc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-vnc.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-hostdev-pci-address-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hostdev-pci-address-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-hostdev-pci-address.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hostdev-pci-address.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-hostdev-scsi-autogen-address.xml

conf: Generate address for scsi host device automatically

2013-06-01 10:00:23 +08:00

qemuxml2argv-hostdev-scsi-boot.args

qemu: Support bootindex for scsi host device

2013-05-13 19:08:32 +08:00

qemuxml2argv-hostdev-scsi-boot.xml

qemu: Support bootindex for scsi host device

2013-05-13 19:08:32 +08:00

qemuxml2argv-hostdev-scsi-lsi.args

qemu: Build qemu command line for scsi host device

2013-05-13 18:50:16 +08:00

qemuxml2argv-hostdev-scsi-lsi.xml

qemu: Build qemu command line for scsi host device

2013-05-13 18:50:16 +08:00

qemuxml2argv-hostdev-scsi-readonly.args

Introduce <readonly> for hostdev

2013-05-13 19:02:40 +08:00

qemuxml2argv-hostdev-scsi-readonly.xml

Introduce <readonly> for hostdev

2013-05-13 19:02:40 +08:00

qemuxml2argv-hostdev-scsi-sgio.xml

conf: Introduce sgio for hostdev

2013-05-17 00:46:44 +08:00

qemuxml2argv-hostdev-scsi-shareable.xml

conf: Introduce <shareable> for hostdev

2013-05-16 23:41:25 +08:00

qemuxml2argv-hostdev-scsi-virtio-scsi.args

qemu: Build qemu command line for scsi host device

2013-05-13 18:50:16 +08:00

qemuxml2argv-hostdev-scsi-virtio-scsi.xml

qemu: Build qemu command line for scsi host device

2013-05-13 18:50:16 +08:00

qemuxml2argv-hostdev-usb-address-device-boot.args

tests: add boot order for host and redirected USB to qemu argv test

2012-11-21 18:43:15 +01:00

qemuxml2argv-hostdev-usb-address-device-boot.xml

tests: add boot order for host and redirected USB to qemu argv test

2012-11-21 18:43:15 +01:00

qemuxml2argv-hostdev-usb-address-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hostdev-usb-address-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-hostdev-usb-address.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hostdev-usb-address.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-hostdev-vfio.args

qemu: use vfio-pci on commandline when appropriate

2013-04-25 21:28:10 -04:00

qemuxml2argv-hostdev-vfio.xml

qemu: use vfio-pci on commandline when appropriate

2013-04-25 21:28:10 -04:00

qemuxml2argv-hugepages.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hugepages.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-hyperv.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hyperv.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-input-usbmouse-addr.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-input-usbmouse-addr.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-input-usbmouse.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-input-usbmouse.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-input-usbtablet.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-input-usbtablet.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-input-xen.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-input-xen.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-kvm.args

qemu: Use -machine accel=tcg|kvm when available

2013-04-23 21:19:35 +02:00

qemuxml2argv-kvm.xml

qemu: Use -machine accel=tcg|kvm when available

2013-04-23 21:19:35 +02:00

qemuxml2argv-kvmclock.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-kvmclock.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-kvmclock+eoi-disabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-kvmclock+eoi-disabled.xml

fix kvm_pv_eoi with kvmclock

2012-10-08 20:13:55 +02:00

qemuxml2argv-lease.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-lease.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-machine-aliases1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-machine-aliases1.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-machine-aliases2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-machine-aliases2.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-machine-core-off.args

qemu: Use -machine accel=tcg|kvm when available

2013-04-23 21:19:35 +02:00

qemuxml2argv-machine-core-off.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-machine-core-on.args

qemu: Use -machine accel=tcg|kvm when available

2013-04-23 21:19:35 +02:00

qemuxml2argv-machine-core-on.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-machine-usb-opt.args

qemu: Use -machine accel=tcg|kvm when available

2013-04-23 21:19:35 +02:00

qemuxml2argv-machine-usb-opt.xml

Add USB option capability

2013-04-12 10:56:03 +01:00

qemuxml2argv-memtune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-memtune.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-metadata.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-metadata.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-migrate.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-migrate.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-minimal-s390.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-minimal-s390.xml

S390: Adding testcases for s390

2012-07-11 11:19:05 +02:00

qemuxml2argv-minimal.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-minimal.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-misc-acpi.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-acpi.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-misc-disable-s3.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-disable-s3.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-misc-disable-suspends.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-disable-suspends.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-misc-enable-s4.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-enable-s4.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-misc-no-reboot.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-no-reboot.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-misc-uuid.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-uuid.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-mlock-off.args

qemu: Implement support for locking domain's memory pages

2013-05-16 23:21:58 +02:00

qemuxml2argv-mlock-off.xml

qemu: Implement support for locking domain's memory pages

2013-05-16 23:21:58 +02:00

qemuxml2argv-mlock-on.args

qemu: Implement support for locking domain's memory pages

2013-05-16 23:21:58 +02:00

qemuxml2argv-mlock-on.xml

qemu: Implement support for locking domain's memory pages

2013-05-16 23:21:58 +02:00

qemuxml2argv-mlock-unsupported.args

qemu: Implement support for locking domain's memory pages

2013-05-16 23:21:58 +02:00

qemuxml2argv-mlock-unsupported.xml

qemu: Implement support for locking domain's memory pages

2013-05-16 23:21:58 +02:00

qemuxml2argv-monitor-json.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-monitor-json.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-multifunction-pci-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-multifunction-pci-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-bandwidth.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-client.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-client.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-eth-ifname.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-eth-ifname.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-net-eth-names.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-eth-names.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-eth.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-eth.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-net-hostdev-vfio.args

qemu: use vfio-pci on commandline when appropriate

2013-04-25 21:28:10 -04:00

qemuxml2argv-net-hostdev-vfio.xml

qemu: use vfio-pci on commandline when appropriate

2013-04-25 21:28:10 -04:00

qemuxml2argv-net-hostdev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-hostdev.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-mcast.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-mcast.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-openvswitch.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-server.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-server.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-user.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-user.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-net-virtio-ccw.args

S390: Do not generate a default USB controller

2013-04-30 19:18:43 -06:00

qemuxml2argv-net-virtio-ccw.xml

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-net-virtio-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-virtio-device.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-virtio-netdev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-virtio-netdev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-virtio-network-portgroup.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-virtio-s390.args

S390: Do not generate a default USB controller

2013-04-30 19:18:43 -06:00

qemuxml2argv-net-virtio-s390.xml

S390: Adding testcases for s390

2012-07-11 11:19:05 +02:00

qemuxml2argv-net-virtio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-virtio.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-no-shutdown.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-no-shutdown.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-nographics-vga.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-nographics-vga.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-nographics.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-nographics.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-nosharepages.args

qemu: New XML to disable memory merge at guest startup

2013-05-15 11:25:45 +08:00

qemuxml2argv-nosharepages.xml

qemu: New XML to disable memory merge at guest startup

2013-05-15 11:25:45 +08:00

qemuxml2argv-numad-auto-memory-vcpu-cpuset.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad-auto-memory-vcpu-cpuset.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-numad-auto-memory-vcpu-no-cpuset-and-placement.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad-auto-memory-vcpu-no-cpuset-and-placement.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-numad-auto-vcpu-no-numatune.xml

numad: Set memory policy from numad advisory nodeset

2012-05-08 16:57:32 -06:00

qemuxml2argv-numad-auto-vcpu-static-numatune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad-auto-vcpu-static-numatune.xml

numad: Set memory policy from numad advisory nodeset

2012-05-08 16:57:32 -06:00

qemuxml2argv-numad-static-memory-auto-vcpu.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad-static-memory-auto-vcpu.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-numad-static-vcpu-no-numatune.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-numad.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad.xml

numad: Set memory policy from numad advisory nodeset

2012-05-08 16:57:32 -06:00

qemuxml2argv-numatune-memory.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numatune-memory.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-parallel-parport-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-parallel-parport-chardev.xml

Fix for parallel port passthrough for QEMU

2012-06-04 16:46:23 -06:00

qemuxml2argv-parallel-tcp-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-parallel-tcp-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-parallel-tcp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-parallel-tcp.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-pci-autoadd-addr.args

qemu: auto-add bridges and allow using them

2013-04-25 13:19:40 +02:00

qemuxml2argv-pci-autoadd-addr.xml

qemu: auto-add bridges and allow using them

2013-04-25 13:19:40 +02:00

qemuxml2argv-pci-autoadd-idx.args

qemu: auto-add bridges and allow using them

2013-04-25 13:19:40 +02:00

qemuxml2argv-pci-autoadd-idx.xml

qemu: auto-add bridges and allow using them

2013-04-25 13:19:40 +02:00

qemuxml2argv-pci-bridge.xml

qemu: auto-add bridges and allow using them

2013-04-25 13:19:40 +02:00

qemuxml2argv-pci-rom.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-pci-rom.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-ppc-dtb.args

qemu: add dtb option support

2013-03-19 15:48:58 -06:00

qemuxml2argv-ppc-dtb.xml

qemu: add dtb option support

2013-03-19 15:48:58 -06:00

qemuxml2argv-pseries-basic.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-pseries-basic.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-pseries-nvram.args

qemu: Add command line builder and parser for NVRAM.

2013-04-25 16:50:45 +08:00

qemuxml2argv-pseries-nvram.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-pseries-usb-default.args

Set legacy USB option with default for ppc64.

2013-04-19 11:30:49 +01:00

qemuxml2argv-pseries-usb-default.xml

Set legacy USB option with default for ppc64.

2013-04-19 11:30:49 +01:00

qemuxml2argv-pseries-usb-multi.args

Set legacy USB option with default for ppc64.

2013-04-19 11:30:49 +01:00

qemuxml2argv-pseries-usb-multi.xml

Set legacy USB option with default for ppc64.

2013-04-19 11:30:49 +01:00

qemuxml2argv-pseries-vio-address-clash.args

tests: Add qemuxml2argv tests for PPC64 pseries machine

2012-01-13 16:10:43 -07:00

qemuxml2argv-pseries-vio-address-clash.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-pseries-vio-user-assigned.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-pseries-vio-user-assigned.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-pseries-vio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-pseries-vio.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-qemu-ns-no-env.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-qemu-ns-no-env.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-qemu-ns.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-qemu-ns.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-reboot-timeout-disabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-reboot-timeout-disabled.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-reboot-timeout-enabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-reboot-timeout-enabled.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-restore-v1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-restore-v1.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-restore-v2-fd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-restore-v2-fd.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-restore-v2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-restore-v2.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-s390-piix-controllers.args

qemu: don't always reserve PCI addresses for implicit controllers

2013-04-27 12:55:46 +02:00

qemuxml2argv-s390-piix-controllers.xml

qemu: don't always reserve PCI addresses for implicit controllers

2013-04-27 12:55:46 +02:00

qemuxml2argv-s390-usb-none.args

qemu: don't assign a PCI address to 'none' USB controller

2013-04-26 20:06:01 +02:00

qemuxml2argv-s390-usb-none.xml

qemu: don't assign a PCI address to 'none' USB controller

2013-04-26 20:06:01 +02:00

qemuxml2argv-seclabel-dynamic-baselabel.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-dynamic-baselabel.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-seclabel-dynamic-override.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-dynamic-override.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-seclabel-dynamic.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-dynamic.xml

Multiple security drivers in XML data

2012-08-20 19:13:33 +02:00

qemuxml2argv-seclabel-none.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-none.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-seclabel-static-relabel.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-static-relabel.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-seclabel-static.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-static.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-serial-dev-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-dev-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-dev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-dev.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-serial-file-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-file-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-file.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-file.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-serial-many-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-many-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-many.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-many.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-serial-pty-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-pty-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-pty.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-pty.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-serial-target-port-auto.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-tcp-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-tcp-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-tcp-telnet-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-tcp-telnet-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-tcp-telnet.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-tcp-telnet.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-serial-tcp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-tcp.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-serial-udp-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-udp-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-udp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-udp.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-serial-unix-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-unix-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-unix.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-unix.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-serial-vc-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-vc-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-vc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-vc.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-smartcard-controller.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-controller.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-host-certificates.args

smartcard: spell ccid-card-emulated qemu property correctly

2013-04-02 06:23:33 -06:00

qemuxml2argv-smartcard-host-certificates.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-host.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-host.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-passthrough-spicevmc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-passthrough-spicevmc.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-passthrough-tcp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-passthrough-tcp.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smbios-date.xml

Validate the bios_date format for <sysinfo>

2013-05-15 12:05:22 -04:00

qemuxml2argv-smbios-uuid-match.xml

Adjust improperly formatted <sysinfo> uuid

2013-05-15 12:05:22 -04:00

qemuxml2argv-smbios.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smbios.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smp.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-sound-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-sound-device.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-sound.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-sound.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00

qemuxml2argv-tpm-no-backend-invalid.xml

conf: don't crash on a tpm device with no backends

2013-05-09 14:25:11 +02:00

qemuxml2argv-tpm-passthrough.args

Add test case for TPM passthrough

2013-04-12 16:55:46 -04:00

qemuxml2argv-tpm-passthrough.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-usb1-usb2.args

qemu: make PCI multifunction support more manual

2011-10-01 11:48:28 -04:00

qemuxml2argv-usb1-usb2.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-controller.args

Default USB device is on slot 1 function 2

2011-09-05 15:03:27 +08:00

qemuxml2argv-usb-controller.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-hub.args

Default USB device is on slot 1 function 2

2011-09-05 15:03:27 +08:00

qemuxml2argv-usb-hub.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-ich9-companion.args

qemu: make PCI multifunction support more manual

2011-10-01 11:48:28 -04:00

qemuxml2argv-usb-ich9-companion.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-ich9-ehci-addr.args

Fix logic for assigning PCI addresses to USB2 companion controllers

2012-05-15 17:07:34 +01:00

qemuxml2argv-usb-ich9-ehci-addr.xml

Set a sensible default master start port for ehci companion controllers

2012-05-15 17:07:34 +01:00

qemuxml2argv-usb-ich9-no-companion.xml

Fix usb master startport parsing

2013-04-25 14:54:46 +02:00

qemuxml2argv-usb-none-hub.xml

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-none-other.xml

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-none-usbtablet.xml

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-none.args

qemu: don't assign a PCI address to 'none' USB controller

2013-04-26 20:06:01 +02:00

qemuxml2argv-usb-none.xml

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-piix3-controller.args

qemu: make PCI multifunction support more manual

2011-10-01 11:48:28 -04:00

qemuxml2argv-usb-piix3-controller.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-ports.args

Default USB device is on slot 1 function 2

2011-09-05 15:03:27 +08:00

qemuxml2argv-usb-ports.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-redir-boot.args

tests: add boot order for host and redirected USB to qemu argv test

2012-11-21 18:43:15 +01:00

qemuxml2argv-usb-redir-boot.xml

tests: add boot order for host and redirected USB to qemu argv test

2012-11-21 18:43:15 +01:00

qemuxml2argv-usb-redir-filter.args

test: add xml2argvtest for usb-redir filter and update xml schema

2012-09-13 17:22:37 +08:00

qemuxml2argv-usb-redir-filter.xml

test: add xml2argvtest for usb-redir filter and update xml schema

2012-09-13 17:22:37 +08:00

qemuxml2argv-usb-redir.args

qemu: make PCI multifunction support more manual

2011-10-01 11:48:28 -04:00

qemuxml2argv-usb-redir.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-vhost_queues.xml

Introduce /domain/devices/interface/driver/@queues attribute

2013-05-22 16:31:27 +02:00

qemuxml2argv-video-device-pciaddr-default.args

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-video-device-pciaddr-default.xml

tests: add one -device video device testcase

2012-12-17 14:02:58 +08:00

qemuxml2argv-virtio-lun.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-virtio-lun.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-virtio-rng-ccw.args

S390: Do not generate a default USB controller

2013-04-30 19:18:43 -06:00

qemuxml2argv-virtio-rng-ccw.xml

S390: Testcases for virtio-scsi and virtio-rng

2013-03-14 15:53:20 -06:00

qemuxml2argv-virtio-rng-default.args

Fix crash parsing RNG device specification

2013-03-07 12:57:10 +00:00

qemuxml2argv-virtio-rng-default.xml

Fix crash parsing RNG device specification

2013-03-07 12:57:10 +00:00

qemuxml2argv-virtio-rng-egd.args

tests: Add tests for virtio-rng device handling

2013-02-25 10:58:04 +01:00

qemuxml2argv-virtio-rng-egd.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-virtio-rng-random.args

virtio-rng: Add rate limiting options for virtio-RNG

2013-03-14 13:28:10 +01:00

qemuxml2argv-virtio-rng-random.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-watchdog-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-watchdog-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-watchdog-dump.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-watchdog-dump.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-watchdog.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-watchdog.xml

qemu: honor allowDiskFormatProbing when parsing command line

2013-04-29 15:52:02 +02:00