libvirt/po/zh_TW.po
Daniel Veillard 9cae1d5ed6 release of 0.6.3
* NEWS configure.in libvirt.spec.in docs/*: release of 0.6.3
* po/*: regenerated
* src/libvirt.c src/virterror.c: fixed some function comments
Daniel
2009-04-24 14:04:54 +00:00

9226 lines
202 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# translation of zh_TW.po to Traditional Chinese
# Translation of zh_TW.po to Chinese, Traditional
# Copyright (C) 2006, 2007 Free Software Foundation, Inc.
# This file is distributed under the same license as the PACKAGE package.
#
# Chester Cheng <ccheng@redhat.com>, 2006, 2007.
msgid ""
msgstr ""
"Project-Id-Version: zh_TW\n"
"Report-Msgid-Bugs-To: libvir-list@redhat.com\n"
"POT-Creation-Date: 2009-04-24 15:38+0200\n"
"PO-Revision-Date: 2007-04-10 16:18+1000\n"
"Last-Translator: Chester Cheng <ccheng@redhat.com>\n"
"Language-Team: Traditional Chinese <zh_TW@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"
#: gnulib/lib/gai_strerror.c:41
msgid "Address family for hostname not supported"
msgstr ""
#: gnulib/lib/gai_strerror.c:42
msgid "Temporary failure in name resolution"
msgstr ""
#: gnulib/lib/gai_strerror.c:43
msgid "Bad value for ai_flags"
msgstr ""
#: gnulib/lib/gai_strerror.c:44
msgid "Non-recoverable failure in name resolution"
msgstr ""
#: gnulib/lib/gai_strerror.c:45
#, fuzzy
msgid "ai_family not supported"
msgstr "呼叫函式庫失敗,可能並不支援"
#: gnulib/lib/gai_strerror.c:46
#, fuzzy
msgid "Memory allocation failure"
msgstr "改變記憶體分配"
#: gnulib/lib/gai_strerror.c:47
msgid "No address associated with hostname"
msgstr ""
#: gnulib/lib/gai_strerror.c:48
msgid "Name or service not known"
msgstr ""
#: gnulib/lib/gai_strerror.c:49
msgid "Servname not supported for ai_socktype"
msgstr ""
#: gnulib/lib/gai_strerror.c:50
msgid "ai_socktype not supported"
msgstr ""
#: gnulib/lib/gai_strerror.c:51
#, fuzzy
msgid "System error"
msgstr "系統呼叫錯誤"
#: gnulib/lib/gai_strerror.c:52
msgid "Argument buffer too small"
msgstr ""
#: gnulib/lib/gai_strerror.c:54
msgid "Processing request in progress"
msgstr ""
#: gnulib/lib/gai_strerror.c:55
msgid "Request canceled"
msgstr ""
#: gnulib/lib/gai_strerror.c:56
msgid "Request not canceled"
msgstr ""
#: gnulib/lib/gai_strerror.c:57
msgid "All requests done"
msgstr ""
#: gnulib/lib/gai_strerror.c:58
msgid "Interrupted by a signal"
msgstr ""
#: gnulib/lib/gai_strerror.c:59
msgid "Parameter string not correctly encoded"
msgstr ""
#: gnulib/lib/gai_strerror.c:71
#, fuzzy
msgid "Unknown error"
msgstr "未知的主機"
#: qemud/qemud.c:240
#, fuzzy, c-format
msgid "Cannot access %s '%s': %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:257
#, c-format
msgid "gnutls_certificate_allocate_credentials: %s"
msgstr ""
#: qemud/qemud.c:270
#, c-format
msgid "gnutls_certificate_set_x509_trust_file: %s"
msgstr ""
#: qemud/qemud.c:284
#, c-format
msgid "gnutls_certificate_set_x509_crl_file: %s"
msgstr ""
#: qemud/qemud.c:301
#, c-format
msgid "gnutls_certificate_set_x509_key_file: %s"
msgstr ""
#: qemud/qemud.c:314
#, c-format
msgid "gnutls_dh_params_init: %s"
msgstr ""
#: qemud/qemud.c:319
#, c-format
msgid "gnutls_dh_params_generate2: %s"
msgstr ""
#: qemud/qemud.c:341
#, fuzzy, c-format
msgid "Failed to read from signal pipe: %s"
msgstr "無法讀取描述檔 %s"
#: qemud/qemud.c:351
#, fuzzy
msgid "Reloading configuration on SIGHUP"
msgstr "分配設定"
#: qemud/qemud.c:353
#, fuzzy
msgid "Error while reloading drivers"
msgstr "分配網路"
#: qemud/qemud.c:359
#, c-format
msgid "Shutting down on signal %d"
msgstr ""
#: qemud/qemud.c:364
#, fuzzy, c-format
msgid "Received unexpected signal %d"
msgstr "無預期的數值節點"
#: qemud/qemud.c:383 src/util.c:324 src/util.c:355
msgid "Failed to set close-on-exec file descriptor flag"
msgstr ""
#: qemud/qemud.c:397 src/util.c:318 src/util.c:349
msgid "Failed to set non-blocking file descriptor flag"
msgstr ""
#: qemud/qemud.c:476
#, fuzzy, c-format
msgid "Failed to open pid file '%s' : %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:482
#, fuzzy, c-format
msgid "Failed to fdopen pid file '%s' : %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:489
#, fuzzy, c-format
msgid "Failed to write to pid file '%s' : %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:496
#, fuzzy, c-format
msgid "Failed to close pid file '%s' : %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:513
#, fuzzy
msgid "Failed to allocate memory for struct qemud_socket"
msgstr "無法分配節點"
#: qemud/qemud.c:523
#, fuzzy, c-format
msgid "Failed to create socket: %s"
msgstr "無法讀取插槽 %d\n"
#: qemud/qemud.c:545
#, fuzzy, c-format
msgid "Failed to bind socket to '%s': %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:554
#, fuzzy, c-format
msgid "Failed to listen for connections on '%s': %s"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:565 qemud/qemud.c:706
msgid "Failed to add server event callback"
msgstr ""
#: qemud/qemud.c:594
#, c-format
msgid "getaddrinfo: %s\n"
msgstr ""
#: qemud/qemud.c:604
#, c-format
msgid "socket: %s"
msgstr ""
#: qemud/qemud.c:613
#, c-format
msgid "bind: %s"
msgstr ""
#: qemud/qemud.c:620
#, c-format
msgid "listen: %s"
msgstr ""
#: qemud/qemud.c:664
#, c-format
msgid "remoteListenTCP: calloc: %s"
msgstr ""
#: qemud/qemud.c:695
#, c-format
msgid "remoteListenTCP: listen: %s"
msgstr ""
#: qemud/qemud.c:789
msgid "Resulting path too long for buffer in qemudInitPaths()"
msgstr ""
#: qemud/qemud.c:801
#, fuzzy
msgid "Failed to allocate struct qemud_server"
msgstr "無法分配節點"
#: qemud/qemud.c:806 qemud/qemud.c:1285 src/domain_conf.c:522
#: src/network_conf.c:170 src/node_device_conf.c:137 src/openvz_conf.c:453
#: src/qemu_driver.c:430 src/remote_internal.c:908 src/remote_internal.c:5833
#: src/storage_conf.c:1304 src/test.c:235 src/test.c:363
msgid "cannot initialize mutex"
msgstr ""
#: qemud/qemud.c:810
msgid "cannot initialize condition variable"
msgstr ""
#: qemud/qemud.c:818
#, fuzzy
msgid "Failed to initialize event system"
msgstr "無法為網路 %s 取消定義"
#: qemud/qemud.c:903
#, fuzzy, c-format
msgid "Failed to initialize SASL authentication %s"
msgstr "無法為網路 %s 取消定義"
#: qemud/qemud.c:921
#, fuzzy, c-format
msgid "Failed to connect to system bus for PolicyKit auth: %s"
msgstr "無法連上 hypervisor"
#: qemud/qemud.c:1033
#, c-format
msgid "remoteInitializeTLSSession: %s"
msgstr ""
#: qemud/qemud.c:1049
#, c-format
msgid "remoteCheckDN: gnutls_x509_cert_get_dn: %s"
msgstr ""
#: qemud/qemud.c:1066
#, c-format
msgid "remoteCheckDN: failed: client DN is %s"
msgstr ""
#: qemud/qemud.c:1081
#, fuzzy, c-format
msgid "remoteCheckCertificate: verify failed: %s"
msgstr "操作失敗:%s"
#: qemud/qemud.c:1088
msgid "remoteCheckCertificate: the client certificate is not trusted."
msgstr ""
#: qemud/qemud.c:1092
msgid "remoteCheckCertificate: the client certificate has unknown issuer."
msgstr ""
#: qemud/qemud.c:1096
msgid "remoteCheckCertificate: the client certificate has been revoked."
msgstr ""
#: qemud/qemud.c:1101
msgid ""
"remoteCheckCertificate: the client certificate uses an insecure algorithm."
msgstr ""
#: qemud/qemud.c:1109
msgid "remoteCheckCertificate: certificate is not X.509"
msgstr ""
#: qemud/qemud.c:1114
msgid "remoteCheckCertificate: no peers"
msgstr ""
#: qemud/qemud.c:1124
msgid "remoteCheckCertificate: gnutls_x509_crt_init failed"
msgstr ""
#: qemud/qemud.c:1134
msgid "remoteCheckCertificate: the client certificate has expired"
msgstr ""
#: qemud/qemud.c:1141
msgid "remoteCheckCertificate: the client certificate is not yet activated"
msgstr ""
#: qemud/qemud.c:1150
msgid ""
"remoteCheckCertificate: client's Distinguished Name is not on the list of "
"allowed clients (tls_allowed_dn_list). Use 'openssl x509 -in clientcert.pem "
"-text' to view the Distinguished Name field in the client certificate, or "
"run this daemon with --verbose option."
msgstr ""
#: qemud/qemud.c:1168
msgid "remoteCheckCertificate: failed to verify client's certificate"
msgstr ""
#: qemud/qemud.c:1171
msgid ""
"remoteCheckCertificate: tls_no_verify_certificate is set so the bad "
"certificate is ignored"
msgstr ""
#: qemud/qemud.c:1177
msgid "client had unexpected data pending tx after access check"
msgstr ""
#: qemud/qemud.c:1205
#, fuzzy, c-format
msgid "Failed to verify client credentials: %s"
msgstr "無法取得節點資訊"
#: qemud/qemud.c:1232
#, fuzzy, c-format
msgid "Failed to accept connection: %s"
msgstr "無法開啟網路 %s"
#: qemud/qemud.c:1238
#, c-format
msgid "Too many active clients (%d), dropping connection"
msgstr ""
#: qemud/qemud.c:1244
#, fuzzy
msgid "Out of memory allocating clients"
msgstr "改變記憶體分配"
#: qemud/qemud.c:1319
#, c-format
msgid "Turn off polkit auth for privileged client %d"
msgstr ""
#: qemud/qemud.c:1358 qemud/qemud.c:1951
#, fuzzy, c-format
msgid "TLS handshake failed: %s"
msgstr "GET 操作失敗:%s"
#: qemud/qemud.c:1531 qemud/qemud.c:1759
#, fuzzy, c-format
msgid "unexpected negative length request %lld"
msgstr "無預期的 mime 類型"
#: qemud/qemud.c:1547
#, c-format
msgid "read: %s"
msgstr ""
#: qemud/qemud.c:1560
#, c-format
msgid "gnutls_record_recv: %s"
msgstr ""
#: qemud/qemud.c:1622
#, fuzzy, c-format
msgid "failed to decode SASL data %s"
msgstr "無法讀取插槽 %d\n"
#: qemud/qemud.c:1770
#, c-format
msgid "write: %s"
msgstr ""
#: qemud/qemud.c:1781
#, c-format
msgid "gnutls_record_send: %s"
msgstr ""
#: qemud/qemud.c:1830
#, fuzzy, c-format
msgid "failed to encode SASL data %s"
msgstr "無法讀取插槽 %d\n"
#: qemud/qemud.c:2075
#, c-format
msgid "Signal handler reported %d errors: last error: %s"
msgstr ""
#: qemud/qemud.c:2130
#, fuzzy
msgid "Failed to register shutdown timeout"
msgstr "無法寫入插槽 %d\n"
#: qemud/qemud.c:2139
#, fuzzy
msgid "Failed to allocate workers"
msgstr "無法分配節點"
#: qemud/qemud.c:2300 qemud/qemud.c:2319
#, fuzzy, c-format
msgid "failed to allocate memory for %s config list"
msgstr "無法分配節點"
#: qemud/qemud.c:2306 qemud/qemud.c:2336
#, fuzzy, c-format
msgid "failed to allocate memory for %s config list value"
msgstr "無法分配節點"
#: qemud/qemud.c:2324 qemud/qemud.c:2347
#, c-format
msgid "remoteReadConfigFile: %s: %s: must be a string or list of strings\n"
msgstr ""
#: qemud/qemud.c:2363
#, c-format
msgid "remoteReadConfigFile: %s: %s: invalid type: got %s; expected %s\n"
msgstr ""
#: qemud/qemud.c:2385
#, c-format
msgid "remoteReadConfigFile: %s\n"
msgstr ""
#: qemud/qemud.c:2428
#, c-format
msgid "remoteReadConfigFile: %s: %s: unsupported auth %s\n"
msgstr ""
#: qemud/qemud.c:2576
msgid "Cannot set group when not running as root"
msgstr ""
#: qemud/qemud.c:2586
#, fuzzy
msgid "Failed to allocate memory for buffer"
msgstr "無法分配節點"
#: qemud/qemud.c:2595
#, fuzzy
msgid "Failed to reallocate enough memory for buffer"
msgstr "無法分配節點"
#: qemud/qemud.c:2601
#, fuzzy, c-format
msgid "Failed to lookup group '%s'"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:2614 qemud/qemud.c:2624
#, fuzzy, c-format
msgid "Failed to parse mode '%s'"
msgstr "無法暫停區域 %s"
#: qemud/qemud.c:2857
#, fuzzy, c-format
msgid "Failed to fork as daemon: %s"
msgstr "無法繼續區域 %s"
#: qemud/qemud.c:2880
#, fuzzy, c-format
msgid "Failed to create pipe: %s"
msgstr "無法讀取插槽 %d\n"
#: qemud/qemud.c:2905
#, fuzzy
msgid "unable to create rundir"
msgstr "網路名稱或 uuid"
#: qemud/qemud.c:2926
#, fuzzy, c-format
msgid "Failed to change group ownership of %s"
msgstr "無法將區域 %s 的核心傾印至 %s"
#: qemud/qemud.c:2934
msgid "Failed to register callback for signal pipe"
msgstr ""
#: qemud/remote.c:255
#, c-format
msgid "program mismatch (actual %x, expected %x)"
msgstr ""
#: qemud/remote.c:261
#, c-format
msgid "version mismatch (actual %x, expected %x)"
msgstr ""
#: qemud/remote.c:266
#, c-format
msgid "direction (%d) != REMOTE_CALL"
msgstr ""
#: qemud/remote.c:271
#, c-format
msgid "status (%d) != REMOTE_OK"
msgstr ""
#: qemud/remote.c:289
#, fuzzy
msgid "authentication required"
msgstr "操作失敗"
#: qemud/remote.c:296
#, fuzzy, c-format
msgid "unknown procedure: %d"
msgstr "收到未知的 HTTP 錯誤碼 %d"
#: qemud/remote.c:305
#, fuzzy
msgid "parse args failed"
msgstr "無法解析伺服器的回應"
#: qemud/remote.c:434
msgid "connection already open"
msgstr ""
#: qemud/remote.c:465
#, fuzzy
msgid "connection not open"
msgstr "無效的連線指標,於 "
#: qemud/remote.c:523
#, fuzzy
msgid "out of memory in strdup"
msgstr "記憶體不足"
#: qemud/remote.c:669
msgid "maxCells > REMOTE_NODE_MAX_CELLS"
msgstr ""
#: qemud/remote.c:760 qemud/remote.c:843
msgid "nparams too large"
msgstr ""
#: qemud/remote.c:809
#, fuzzy
msgid "unknown type"
msgstr "未知的作業系統類型"
#: qemud/remote.c:991 qemud/remote.c:1041
msgid "size > maximum buffer size"
msgstr ""
#: qemud/remote.c:1369
#, fuzzy
msgid "unable to get security label"
msgstr "區域目前的記憶體"
#: qemud/remote.c:1398
#, fuzzy
msgid "unable to get security model"
msgstr "區域目前的記憶體"
#: qemud/remote.c:1467
msgid "maxinfo > REMOTE_VCPUINFO_MAX"
msgstr ""
#: qemud/remote.c:1473
msgid "maxinfo * maplen > REMOTE_CPUMAPS_MAX"
msgstr ""
#: qemud/remote.c:1716
msgid "maxnames > REMOTE_DOMAIN_NAME_LIST_MAX"
msgstr ""
#: qemud/remote.c:1838
msgid "cpumap_len > REMOTE_CPUMAP_MAX"
msgstr ""
#: qemud/remote.c:2157 qemud/remote.c:2222 qemud/remote.c:3241
msgid "maxnames > REMOTE_NETWORK_NAME_LIST_MAX"
msgstr ""
#: qemud/remote.c:2190
msgid "maxids > REMOTE_DOMAIN_ID_LIST_MAX"
msgstr ""
#: qemud/remote.c:2600 src/remote_internal.c:5164
#, c-format
msgid "Cannot resolve address %d: %s"
msgstr ""
#: qemud/remote.c:2645
msgid "client tried invalid SASL init request"
msgstr ""
#: qemud/remote.c:2654
#, fuzzy, c-format
msgid "failed to get sock address: %s"
msgstr "無法將區域 %s 存至 %s"
#: qemud/remote.c:2666
#, fuzzy, c-format
msgid "failed to get peer address: %s"
msgstr "無法取得節點資訊"
#: qemud/remote.c:2687
#, c-format
msgid "sasl context setup failed %d (%s)"
msgstr ""
#: qemud/remote.c:2700
msgid "cannot TLS get cipher size"
msgstr ""
#: qemud/remote.c:2709
#, c-format
msgid "cannot set SASL external SSF %d (%s)"
msgstr ""
#: qemud/remote.c:2737
#, c-format
msgid "cannot set SASL security props %d (%s)"
msgstr ""
#: qemud/remote.c:2753
#, c-format
msgid "cannot list SASL mechanisms %d (%s)"
msgstr ""
#: qemud/remote.c:2762
msgid "cannot allocate mechlist"
msgstr ""
#: qemud/remote.c:2793 src/remote_internal.c:5660
#, c-format
msgid "cannot query SASL ssf on connection %d (%s)"
msgstr ""
#: qemud/remote.c:2803
#, c-format
msgid "negotiated SSF %d was not strong enough"
msgstr ""
#: qemud/remote.c:2832
#, c-format
msgid "cannot query SASL username on connection %d (%s)"
msgstr ""
#: qemud/remote.c:2840
msgid "no client username was found"
msgstr ""
#: qemud/remote.c:2850
#, fuzzy
msgid "out of memory copying username"
msgstr "記憶體不足"
#: qemud/remote.c:2869
#, c-format
msgid "SASL client %s not allowed in whitelist"
msgstr ""
#: qemud/remote.c:2899 qemud/remote.c:2986
msgid "client tried invalid SASL start request"
msgstr ""
#: qemud/remote.c:2914
#, c-format
msgid "sasl start failed %d (%s)"
msgstr ""
#: qemud/remote.c:2921
#, c-format
msgid "sasl start reply data too long %d"
msgstr ""
#: qemud/remote.c:3000
#, c-format
msgid "sasl step failed %d (%s)"
msgstr ""
#: qemud/remote.c:3008
#, c-format
msgid "sasl step reply data too long %d"
msgstr ""
#: qemud/remote.c:3064
msgid "client tried unsupported SASL init request"
msgstr ""
#: qemud/remote.c:3077
msgid "client tried unsupported SASL start request"
msgstr ""
#: qemud/remote.c:3090
msgid "client tried unsupported SASL step request"
msgstr ""
#: qemud/remote.c:3126
msgid "client tried invalid PolicyKit init request"
msgstr ""
#: qemud/remote.c:3131
msgid "cannot get peer socket identity"
msgstr ""
#: qemud/remote.c:3135
#, c-format
msgid "Checking PID %d running as %d"
msgstr ""
#: qemud/remote.c:3139
#, c-format
msgid "Failed to lookup policy kit caller: %s"
msgstr ""
#: qemud/remote.c:3146
#, fuzzy, c-format
msgid "Failed to create polkit action %s\n"
msgstr "無法建立非運作中的區域 %s\n"
#: qemud/remote.c:3156
#, fuzzy, c-format
msgid "Failed to create polkit context %s\n"
msgstr "無法建立非運作中的區域 %s\n"
#: qemud/remote.c:3174
#, c-format
msgid "Policy kit failed to check authorization %d %s"
msgstr ""
#: qemud/remote.c:3188
#, c-format
msgid "Policy kit denied action %s from pid %d, uid %d, result: %s\n"
msgstr ""
#: qemud/remote.c:3193
#, c-format
msgid "Policy allowed action %s from pid %d, uid %d, result %s"
msgstr ""
#: qemud/remote.c:3218
msgid "client tried unsupported PolicyKit init request"
msgstr ""
#: qemud/remote.c:3274
msgid "maxnames > REMOTE_STORAGE_POOL_NAME_LIST_MAX"
msgstr ""
#: qemud/remote.c:3741
msgid "maxnames > REMOTE_STORAGE_VOL_NAME_LIST_MAX"
msgstr ""
#: qemud/remote.c:4059 qemud/remote.c:4225
msgid "maxnames > REMOTE_NODE_DEVICE_NAME_LIST_MAX"
msgstr ""
#: qemud/remote.c:4120 qemud/remote.c:4150 qemud/remote.c:4191
#: qemud/remote.c:4219 qemud/remote.c:4261 qemud/remote.c:4287
#: qemud/remote.c:4313 qemud/remote.c:4361
#, fuzzy
msgid "node_device not found"
msgstr "區域資訊"
#: qemud/remote.c:4389
#, fuzzy
msgid "unexpected async event method call"
msgstr "無預期的 dict 節點"
#: src/bridge.c:414
msgid "Not enabling IFF_VNET_HDR; TUNGETFEATURES ioctl() not implemented"
msgstr ""
#: src/bridge.c:420
msgid ""
"Not enabling IFF_VNET_HDR; TUNGETFEATURES ioctl() reports no IFF_VNET_HDR"
msgstr ""
#: src/bridge.c:429
msgid "Not enabling IFF_VNET_HDR; TUNGETIFF ioctl() not implemented"
msgstr ""
#: src/bridge.c:434
msgid "Enabling IFF_VNET_HDR"
msgstr ""
#: src/bridge.c:439
msgid "Not enabling IFF_VNET_HDR; disabled at build time"
msgstr ""
#: src/conf.c:349
msgid "unterminated number"
msgstr "未中止的數量"
#: src/conf.c:382 src/conf.c:398 src/conf.c:409
msgid "unterminated string"
msgstr "未中止的字串"
#: src/conf.c:436 src/conf.c:489
msgid "expecting a value"
msgstr "預期的是數值"
#: src/conf.c:456
msgid "expecting a separator in list"
msgstr "預期的是清單式的分隔子"
#: src/conf.c:479
#, fuzzy
msgid "list is not closed with ]"
msgstr "清單並沒有以 ] 結尾"
#: src/conf.c:523
msgid "expecting a name"
msgstr "預期的是名稱"
#: src/conf.c:584
msgid "expecting a separator"
msgstr "預期的是分隔子"
#: src/conf.c:615
msgid "expecting an assignment"
msgstr "預期的是指定子"
#: src/conf.c:900
msgid "failed to open file"
msgstr "無法開啟檔案"
#: src/conf.c:911
msgid "failed to save content"
msgstr "無法存入內容"
#: src/console.c:75
#, fuzzy, c-format
msgid "unable to open tty %s: %s\n"
msgstr "無法暫停區域 %s"
#: src/console.c:86
#, c-format
msgid "unable to get tty attributes: %s\n"
msgstr ""
#: src/console.c:95
#, c-format
msgid "unable to set tty attributes: %s\n"
msgstr ""
#: src/console.c:130
#, c-format
msgid "failure waiting for I/O: %s\n"
msgstr ""
#: src/console.c:145
#, c-format
msgid "failure reading input: %s\n"
msgstr ""
#: src/console.c:167
#, c-format
msgid "failure writing output: %s\n"
msgstr ""
#: src/datatypes.c:267
msgid "failed to add domain to connection hash table"
msgstr "無法為連線雜湊表新增區域"
#: src/datatypes.c:308
msgid "domain missing from connection hash table"
msgstr "連線雜湊表中找不到區域"
#: src/datatypes.c:402
msgid "failed to add network to connection hash table"
msgstr "無法將網路加入至連線雜湊表"
#: src/datatypes.c:440
msgid "network missing from connection hash table"
msgstr "連線雜湊表中找不到網路"
#: src/datatypes.c:534
#, fuzzy
msgid "failed to add storage pool to connection hash table"
msgstr "無法將網路加入至連線雜湊表"
#: src/datatypes.c:573
#, fuzzy
msgid "pool missing from connection hash table"
msgstr "連線雜湊表中找不到區域"
#: src/datatypes.c:670
#, fuzzy
msgid "failed to add storage vol to connection hash table"
msgstr "無法將網路加入至連線雜湊表"
#: src/datatypes.c:710
#, fuzzy
msgid "vol missing from connection hash table"
msgstr "連線雜湊表中找不到區域"
#: src/datatypes.c:800
#, fuzzy
msgid "failed to add node dev to conn hash table"
msgstr "無法將網路加入至連線雜湊表"
#: src/datatypes.c:838
#, fuzzy
msgid "dev missing from connection hash table"
msgstr "連線雜湊表中找不到區域"
#: src/domain_conf.c:613
#, fuzzy, c-format
msgid "unknown disk type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/domain_conf.c:666
#, fuzzy, c-format
msgid "unknown disk device '%s'"
msgstr "未知的指令:「%s」"
#: src/domain_conf.c:692
#, c-format
msgid "Invalid floppy device name: %s"
msgstr ""
#: src/domain_conf.c:707
#, c-format
msgid "Invalid harddisk device name: %s"
msgstr ""
#: src/domain_conf.c:714
#, fuzzy, c-format
msgid "unknown disk bus type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/domain_conf.c:739
#, c-format
msgid "Invalid bus type '%s' for floppy disk"
msgstr ""
#: src/domain_conf.c:745
#, c-format
msgid "Invalid bus type '%s' for disk"
msgstr ""
#: src/domain_conf.c:752
#, fuzzy, c-format
msgid "unknown disk cache mode '%s'"
msgstr "未知的指令:「%s」"
#: src/domain_conf.c:806
#, fuzzy, c-format
msgid "unknown filesystem type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/domain_conf.c:900
#, fuzzy, c-format
msgid "unknown interface type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/domain_conf.c:966
msgid ""
"No <source> 'network' attribute specified with <interface type='network'/>"
msgstr ""
#: src/domain_conf.c:992
msgid "No <source> 'dev' attribute specified with <interface type='bridge'/>"
msgstr ""
#: src/domain_conf.c:1012
msgid "No <source> 'port' attribute specified with socket interface"
msgstr ""
#: src/domain_conf.c:1017
msgid "Cannot parse <source> 'port' attribute with socket interface"
msgstr ""
#: src/domain_conf.c:1025
msgid "No <source> 'address' attribute specified with socket interface"
msgstr ""
#: src/domain_conf.c:1050
msgid "Model name contains invalid characters"
msgstr ""
#: src/domain_conf.c:1224 src/domain_conf.c:1301
#, fuzzy
msgid "Missing source path attribute for char device"
msgstr "找不到裝置的來源資訊"
#: src/domain_conf.c:1241 src/domain_conf.c:1258
#, fuzzy
msgid "Missing source host attribute for char device"
msgstr "找不到裝置的來源資訊"
#: src/domain_conf.c:1246 src/domain_conf.c:1263 src/domain_conf.c:1283
#, fuzzy
msgid "Missing source service attribute for char device"
msgstr "找不到裝置的來源資訊"
#: src/domain_conf.c:1354
#, fuzzy
msgid "missing input device type"
msgstr "找不到 root 裝置的資訊"
#: src/domain_conf.c:1360
#, fuzzy, c-format
msgid "unknown input device type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/domain_conf.c:1367
#, fuzzy, c-format
msgid "unknown input bus type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/domain_conf.c:1375
#, c-format
msgid "ps2 bus does not support %s input device"
msgstr ""
#: src/domain_conf.c:1381 src/domain_conf.c:1388
#, c-format
msgid "unsupported input bus %s"
msgstr ""
#: src/domain_conf.c:1393
#, c-format
msgid "xen bus does not support %s input device"
msgstr ""
#: src/domain_conf.c:1438
#, fuzzy
msgid "missing graphics device type"
msgstr "找不到 root 裝置的資訊"
#: src/domain_conf.c:1444
#, fuzzy, c-format
msgid "unknown graphics device type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/domain_conf.c:1455
#, c-format
msgid "cannot parse vnc port %s"
msgstr ""
#: src/domain_conf.c:1493
#, fuzzy, c-format
msgid "unknown fullscreen value '%s'"
msgstr "未知的作業系統類型 %s"
#: src/domain_conf.c:1532
#, fuzzy, c-format
msgid "unknown sound model '%s'"
msgstr "未知的指令:「%s」"
#: src/domain_conf.c:1566
#, c-format
msgid "cannot parse vendor id %s"
msgstr ""
#: src/domain_conf.c:1573
msgid "usb vendor needs id"
msgstr ""
#: src/domain_conf.c:1583
#, c-format
msgid "cannot parse product %s"
msgstr ""
#: src/domain_conf.c:1591
msgid "usb product needs id"
msgstr ""
#: src/domain_conf.c:1602 src/domain_conf.c:1689
#, c-format
msgid "cannot parse bus %s"
msgstr ""
#: src/domain_conf.c:1609
msgid "usb address needs bus id"
msgstr ""
#: src/domain_conf.c:1618
#, c-format
msgid "cannot parse device %s"
msgstr ""
#: src/domain_conf.c:1626
msgid "usb address needs device id"
msgstr ""
#: src/domain_conf.c:1631
#, fuzzy, c-format
msgid "unknown usb source type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/domain_conf.c:1642
#, fuzzy
msgid "missing vendor"
msgstr "找不到 \""
#: src/domain_conf.c:1648
#, fuzzy
msgid "missing product"
msgstr "找不到 \""
#: src/domain_conf.c:1676
#, fuzzy, c-format
msgid "cannot parse domain %s"
msgstr "無法連上 %s"
#: src/domain_conf.c:1696
msgid "pci address needs bus id"
msgstr ""
#: src/domain_conf.c:1705
#, fuzzy, c-format
msgid "cannot parse slot %s"
msgstr "無法連上 %s"
#: src/domain_conf.c:1713
msgid "pci address needs slot id"
msgstr ""
#: src/domain_conf.c:1722
#, fuzzy, c-format
msgid "cannot parse function %s"
msgstr "無法連上 %s"
#: src/domain_conf.c:1730
msgid "pci address needs function id"
msgstr ""
#: src/domain_conf.c:1735
#, fuzzy, c-format
msgid "unknown pci source type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/domain_conf.c:1768
#, fuzzy, c-format
msgid "unknown hostdev mode '%s'"
msgstr "未知的主機 %s"
#: src/domain_conf.c:1779
#, fuzzy, c-format
msgid "unknown host device type '%s'"
msgstr "未知的主機 %s"
#: src/domain_conf.c:1784
#, fuzzy
msgid "missing type in hostdev"
msgstr "找不到裝置的目標資訊"
#: src/domain_conf.c:1812
#, fuzzy, c-format
msgid "unknown node %s"
msgstr "未知的主機 %s"
#: src/domain_conf.c:1843
#, c-format
msgid "unknown lifecycle action %s"
msgstr ""
#: src/domain_conf.c:1867
#, fuzzy
msgid "missing security type"
msgstr "找不到 root 裝置的資訊"
#: src/domain_conf.c:1874
#, fuzzy
msgid "invalid security type"
msgstr "無效的區域指標,於 %s"
#: src/domain_conf.c:1887
#, fuzzy
msgid "missing security model"
msgstr "區域目前的記憶體"
#: src/domain_conf.c:1896
msgid "security label is missing"
msgstr ""
#: src/domain_conf.c:1910
msgid "security imagelabel is missing"
msgstr ""
#: src/domain_conf.c:1943 src/domain_conf.c:2577 src/domain_conf.c:2618
#: src/network_conf.c:480 src/network_conf.c:520 src/node_device_conf.c:1045
#: src/qemu_conf.c:1608 src/storage_conf.c:694 src/storage_conf.c:1069
#, fuzzy
msgid "missing root element"
msgstr "找不到 root 裝置的資訊"
#: src/domain_conf.c:1979
#, fuzzy
msgid "unknown device type"
msgstr "未知的作業系統類型"
#: src/domain_conf.c:2026
#, fuzzy
msgid "missing domain type attribute"
msgstr "找不到區域名稱的資訊"
#: src/domain_conf.c:2032
#, fuzzy, c-format
msgid "invalid domain type %s"
msgstr "無效的區域指標,於 %s"
#: src/domain_conf.c:2049 src/network_conf.c:335
#, fuzzy
msgid "Failed to generate UUID"
msgstr "無法取得網路 UUID"
#: src/domain_conf.c:2055 src/network_conf.c:342 src/storage_conf.c:509
msgid "malformed uuid element"
msgstr ""
#: src/domain_conf.c:2064
msgid "missing memory element"
msgstr ""
#: src/domain_conf.c:2097
#, fuzzy, c-format
msgid "unexpected feature %s"
msgstr "無預期的資料「%s」"
#: src/domain_conf.c:2137
#, fuzzy
msgid "no OS type"
msgstr "未知的作業系統類型"
#: src/domain_conf.c:2165
#, c-format
msgid "os type '%s' & arch '%s' combination is not supported"
msgstr ""
#: src/domain_conf.c:2173 src/xm_internal.c:701
#, c-format
msgid "no supported architecture for os type '%s'"
msgstr ""
#: src/domain_conf.c:2223
msgid "cannot extract boot device"
msgstr ""
#: src/domain_conf.c:2231
#, fuzzy
msgid "missing boot device"
msgstr "找不到 root 裝置的資訊"
#: src/domain_conf.c:2236
#, fuzzy, c-format
msgid "unknown boot device '%s'"
msgstr "未知的主機 %s"
#: src/domain_conf.c:2256
#, fuzzy
msgid "cannot extract disk devices"
msgstr "無法解開執行中 %s hypervisor 的版本\n"
#: src/domain_conf.c:2277
msgid "cannot extract filesystem devices"
msgstr ""
#: src/domain_conf.c:2296
#, fuzzy
msgid "cannot extract network devices"
msgstr "網路名稱"
#: src/domain_conf.c:2317
msgid "cannot extract parallel devices"
msgstr ""
#: src/domain_conf.c:2337
msgid "cannot extract serial devices"
msgstr ""
#: src/domain_conf.c:2387
#, fuzzy
msgid "cannot extract input devices"
msgstr "無法解開執行中 %s hypervisor 的版本\n"
#: src/domain_conf.c:2422
#, fuzzy
msgid "cannot extract graphics devices"
msgstr "無法解開執行中 %s hypervisor 的版本\n"
#: src/domain_conf.c:2464
#, fuzzy
msgid "cannot extract sound devices"
msgstr "無法解開執行中 %s hypervisor 的版本\n"
#: src/domain_conf.c:2494
msgid "cannot extract host devices"
msgstr ""
#: src/domain_conf.c:2540 src/network_conf.c:445 src/node_device_conf.c:1010
#: src/qemu_conf.c:1554 src/storage_conf.c:649
#, c-format
msgid "at line %d: %s"
msgstr ""
#: src/domain_conf.c:2571 src/domain_conf.c:2612 src/network_conf.c:474
#: src/network_conf.c:514 src/node_device_conf.c:1039 src/qemu_conf.c:1602
#: src/storage_conf.c:681 src/storage_conf.c:1056
#, fuzzy
msgid "failed to parse xml document"
msgstr "無法存入內容"
#: src/domain_conf.c:2642 src/network_conf.c:542 src/node_device_conf.c:979
#: src/qemu_conf.c:1620
msgid "incorrect root element"
msgstr ""
#: src/domain_conf.c:2851
msgid "topology cpuset syntax error"
msgstr ""
#: src/domain_conf.c:2865
#, fuzzy, c-format
msgid "unexpected lifecycle type %d"
msgstr "無預期的 mime 類型"
#: src/domain_conf.c:2887
#, fuzzy, c-format
msgid "unexpected disk type %d"
msgstr "無預期的 mime 類型"
#: src/domain_conf.c:2892
#, fuzzy, c-format
msgid "unexpected disk device %d"
msgstr "無預期的 dict 節點"
#: src/domain_conf.c:2897
#, fuzzy, c-format
msgid "unexpected disk bus %d"
msgstr "無預期的 dict 節點"
#: src/domain_conf.c:2902
#, fuzzy, c-format
msgid "unexpected disk cache mode %d"
msgstr "無預期的 dict 節點"
#: src/domain_conf.c:2950
#, fuzzy, c-format
msgid "unexpected filesystem type %d"
msgstr "無預期的 mime 類型"
#: src/domain_conf.c:3001 src/domain_conf.c:3223
#, fuzzy, c-format
msgid "unexpected net type %d"
msgstr "無預期的 mime 類型"
#: src/domain_conf.c:3076
#, fuzzy, c-format
msgid "unexpected char type %d"
msgstr "無預期的 mime 類型"
#: src/domain_conf.c:3176 src/xend_internal.c:5492
#, fuzzy, c-format
msgid "unexpected sound model %d"
msgstr "無預期的 dict 節點"
#: src/domain_conf.c:3196 src/xend_internal.c:5514
#, fuzzy, c-format
msgid "unexpected input type %d"
msgstr "無預期的 mime 類型"
#: src/domain_conf.c:3201
#, fuzzy, c-format
msgid "unexpected input bus type %d"
msgstr "無預期的 mime 類型"
#: src/domain_conf.c:3286
#, fuzzy, c-format
msgid "unexpected hostdev mode %d"
msgstr "無預期的 dict 節點"
#: src/domain_conf.c:3293
#, fuzzy, c-format
msgid "unexpected hostdev type %d"
msgstr "無預期的 mime 類型"
#: src/domain_conf.c:3341
#, fuzzy, c-format
msgid "unexpected domain type %d"
msgstr "無預期的 mime 類型"
#: src/domain_conf.c:3426
#, fuzzy, c-format
msgid "unexpected boot device type %d"
msgstr "無預期的 mime 類型"
#: src/domain_conf.c:3444
#, fuzzy, c-format
msgid "unexpected feature %d"
msgstr "無預期的數值節點"
#: src/domain_conf.c:3589 src/network_conf.c:657
#, fuzzy, c-format
msgid "cannot create config directory '%s'"
msgstr "無法寫入設定檔:%s"
#: src/domain_conf.c:3598 src/network_conf.c:666
#, fuzzy, c-format
msgid "cannot create config file '%s'"
msgstr "無法寫入設定檔:%s"
#: src/domain_conf.c:3606 src/network_conf.c:674
#, fuzzy, c-format
msgid "cannot write config file '%s'"
msgstr "無法寫入設定檔:%s"
#: src/domain_conf.c:3613 src/network_conf.c:681
#, fuzzy, c-format
msgid "cannot save config file '%s'"
msgstr "無法寫入設定檔:%s"
#: src/domain_conf.c:3714 src/network_conf.c:787
#, fuzzy, c-format
msgid "Failed to open dir '%s'"
msgstr "無法暫停區域 %s"
#: src/domain_conf.c:3768
#, fuzzy, c-format
msgid "cannot remove config %s"
msgstr "無法寫入設定檔:%s"
#: src/domain_conf.c:3842
#, fuzzy
msgid "unknown virt type"
msgstr "未知的作業系統類型"
#: src/domain_conf.c:3853
#, c-format
msgid "no emulator for domain %s os type %s on architecture %s"
msgstr ""
#: src/iptables.c:103
#, fuzzy, c-format
msgid "Failed to run '%s %s': %s"
msgstr "無法讀取插槽 %d\n"
#: src/iptables.c:151
#, fuzzy
msgid "Failed to read "
msgstr "無法讀取插槽 %d\n"
#: src/iptables.c:180
#, fuzzy
msgid "Failed to write to "
msgstr "無法寫入插槽 %d\n"
#: src/iptables.c:246
#, fuzzy, c-format
msgid "Failed to create directory %s : %s"
msgstr "無法從 %s 建立網路"
#: src/iptables.c:252
#, fuzzy, c-format
msgid "Failed to saves iptables rules to %s : %s"
msgstr "無法將區域 %s 存至 %s"
#: src/iptables.c:553
#, c-format
msgid "Failed to remove iptables rule '%s' from chain '%s' in table '%s': %s"
msgstr ""
#: src/iptables.c:563
#, c-format
msgid "Failed to add iptables rule '%s' to chain '%s' in table '%s': %s"
msgstr ""
#: src/libvirt.c:904
#, fuzzy
msgid "could not parse connection URI"
msgstr "無法連上 %s"
#: src/libvirt.c:2054
#, fuzzy
msgid "cannot get working directory"
msgstr "網路名稱"
#: src/libvirt.c:2061 src/libvirt.c:2137
msgid "path too long"
msgstr ""
#: src/libvirt.c:2130
#, fuzzy
msgid "cannot get current directory"
msgstr "區域目前的記憶體"
#: src/libvirt.c:2630
msgid "virDomainGetXMLDesc with secure flag"
msgstr ""
#: src/libvirt.c:2771
#, fuzzy
msgid "domainMigratePrepare did not set uri"
msgstr "區域的資訊不正確domid 並非數字型態"
#: src/libvirt.c:2800
#, fuzzy
msgid "domainMigratePrepare2 did not set uri"
msgstr "區域的資訊不正確domid 並非數字型態"
#: src/libvirt.c:3525
msgid "path is NULL"
msgstr ""
#: src/libvirt.c:3531
msgid "flags must be zero"
msgstr ""
#: src/libvirt.c:3538
msgid "buffer is NULL"
msgstr ""
#: src/libvirt.c:3637
msgid "flags parameter must be VIR_MEMORY_VIRTUAL"
msgstr ""
#: src/libvirt.c:3644
msgid "buffer is NULL but size is non-zero"
msgstr ""
#: src/lxc_container.c:124
#, fuzzy
msgid "setsid failed"
msgstr "操作失敗:%s"
#: src/lxc_container.c:130
msgid "ioctl(TIOCSTTY) failed"
msgstr ""
#: src/lxc_container.c:143
#, fuzzy
msgid "dup2(stdin) failed"
msgstr "操作失敗:%s"
#: src/lxc_container.c:149
#, fuzzy
msgid "dup2(stdout) failed"
msgstr "操作失敗:%s"
#: src/lxc_container.c:155
#, fuzzy
msgid "dup2(stderr) failed"
msgstr "操作失敗:%s"
#: src/lxc_container.c:183
#, fuzzy
msgid "unable to send container continue message"
msgstr "無法建立非運作中的區域 %s\n"
#: src/lxc_container.c:212
#, fuzzy
msgid "Failed to read the container continue message"
msgstr "無法建立非運作中的區域 %s\n"
#: src/lxc_container.c:293
#, fuzzy
msgid "failed to make root private"
msgstr "無法從 %s 建立區域"
#: src/lxc_container.c:304 src/lxc_container.c:326 src/lxc_container.c:493
#, fuzzy, c-format
msgid "failed to create %s"
msgstr "無法讀取插槽 %d\n"
#: src/lxc_container.c:313
#, fuzzy, c-format
msgid "failed to mount empty tmpfs at %s"
msgstr "無法暫停區域 %s"
#: src/lxc_container.c:334
#, fuzzy, c-format
msgid "failed to bind new root %s into tmpfs"
msgstr "無法為網路 %s 取消定義"
#: src/lxc_container.c:343
#, fuzzy, c-format
msgid "failed to chroot into %s"
msgstr "無法為區域 %s 取消定義"
#: src/lxc_container.c:351
#, fuzzy
msgid "failed to pivot root"
msgstr "無法將區域 %s 存至 %s"
#: src/lxc_container.c:394
#, fuzzy, c-format
msgid "failed to mkdir %s"
msgstr "無法從 %s 建立區域"
#: src/lxc_container.c:400
#, fuzzy, c-format
msgid "failed to mount %s on %s"
msgstr "無法暫停區域 %s"
#: src/lxc_container.c:408
#, fuzzy
msgid "cannot create /dev/pts"
msgstr "網路名稱"
#: src/lxc_container.c:415
#, fuzzy
msgid "failed to mount /dev/pts in container"
msgstr "無法刪除區域 %s"
#: src/lxc_container.c:446
#, fuzzy, c-format
msgid "failed to make device %s"
msgstr "無法從 %s 建立區域"
#: src/lxc_container.c:455
#, fuzzy
msgid "failed to create symlink /dev/ptmx to /dev/pts/ptmx"
msgstr "無法將區域 %s 存至 %s"
#: src/lxc_container.c:463
#, fuzzy
msgid "failed to make device /dev/ptmx"
msgstr "無法從 %s 建立區域"
#: src/lxc_container.c:501 src/lxc_container.c:616
#, fuzzy, c-format
msgid "failed to mount %s at %s"
msgstr "無法暫停區域 %s"
#: src/lxc_container.c:524
#, fuzzy
msgid "failed to read /proc/mounts"
msgstr "無法讀取插槽 %d\n"
#: src/lxc_container.c:552
#, fuzzy, c-format
msgid "failed to unmount '%s'"
msgstr "無法暫停區域 %s"
#: src/lxc_container.c:602
#, fuzzy
msgid "failed to make / slave"
msgstr "無法從 %s 建立區域"
#: src/lxc_container.c:626
#, fuzzy
msgid "failed to mount /proc"
msgstr "無法暫停區域 %s"
#: src/lxc_container.c:664
msgid "lxcChild() passed invalid vm definition"
msgstr ""
#: src/lxc_container.c:685
#, fuzzy, c-format
msgid "failed to open tty %s"
msgstr "無法暫停區域 %s"
#: src/lxc_container.c:759
#, fuzzy
msgid "failed to run clone container"
msgstr "無法開啟要讀取的 %s"
#: src/lxc_controller.c:86
#, fuzzy, c-format
msgid "Unable to create cgroup for %s\n"
msgstr "無法從 %s 建立區域"
#: src/lxc_controller.c:116
#, fuzzy
msgid "Failed to set lxc resources"
msgstr "無法關閉插槽 %d\n"
#: src/lxc_controller.c:142
#, fuzzy, c-format
msgid "failed to create server socket '%s'"
msgstr "無法讀取插槽 %d\n"
#: src/lxc_controller.c:154
#, fuzzy, c-format
msgid "failed to bind server socket '%s'"
msgstr "無法讀取插槽 %d\n"
#: src/lxc_controller.c:160
#, fuzzy, c-format
msgid "failed to listen server socket %s"
msgstr "無法關閉插槽 %d\n"
#: src/lxc_controller.c:194
#, fuzzy, c-format
msgid "read of fd %d failed"
msgstr "操作失敗:%s"
#: src/lxc_controller.c:201
#, fuzzy, c-format
msgid "write to fd %d failed"
msgstr "操作失敗:%s"
#: src/lxc_controller.c:253
#, fuzzy
msgid "epoll_create(2) failed"
msgstr "操作失敗:%s"
#: src/lxc_controller.c:263
#, fuzzy
msgid "epoll_ctl(appPty) failed"
msgstr "操作失敗:%s"
#: src/lxc_controller.c:269 src/lxc_controller.c:277 src/lxc_controller.c:285
#: src/lxc_controller.c:305 src/lxc_controller.c:311
#, fuzzy
msgid "epoll_ctl(contPty) failed"
msgstr "操作失敗:%s"
#: src/lxc_controller.c:328
#, c-format
msgid "error event %d"
msgstr ""
#: src/lxc_controller.c:349
#, fuzzy
msgid "epoll_wait() failed"
msgstr "操作失敗:%s"
#: src/lxc_controller.c:399
#, fuzzy, c-format
msgid "failed to move interface %s to ns %d"
msgstr "無法取得節點資訊"
#: src/lxc_controller.c:424
#, fuzzy, c-format
msgid "failed to delete veth: %s"
msgstr "無法取得網路「%s」"
#: src/lxc_controller.c:457
#, fuzzy
msgid "sockpair failed"
msgstr "操作失敗:%s"
#: src/lxc_controller.c:487
#, fuzzy
msgid "cannot unshare mount namespace"
msgstr "無法連上 %s"
#: src/lxc_controller.c:493
#, fuzzy
msgid "failed to switch root mount into slave mode"
msgstr "無法為區域 %s 取消定義"
#: src/lxc_controller.c:505
#, fuzzy, c-format
msgid "failed to make path %s"
msgstr "無法從 %s 建立區域"
#: src/lxc_controller.c:513
#, fuzzy, c-format
msgid "failed to mount devpts on %s"
msgstr "無法暫停區域 %s"
#: src/lxc_controller.c:531 src/lxc_controller.c:540 src/lxc_driver.c:876
#, fuzzy
msgid "failed to allocate tty"
msgstr "無法分配節點"
#: src/lxc_controller.c:712
#, fuzzy, c-format
msgid "Unable to write pid file '%s/%s.pid'"
msgstr "無法寫入設定檔"
#: src/lxc_controller.c:726
#, fuzzy
msgid "Unable to change to root dir"
msgstr "區域目前的記憶體"
#: src/lxc_controller.c:732
#, fuzzy
msgid "Unable to become session leader"
msgstr "無法讀取設定檔 %s"
#: src/lxc_controller.c:740
#, fuzzy
msgid "Failed connection from LXC driver"
msgstr "無效的連線指標,於 %s"
#: src/lxc_driver.c:288 src/lxc_driver.c:981 src/lxc_driver.c:1020
msgid "System lacks NETNS support"
msgstr ""
#: src/lxc_driver.c:327 src/lxc_driver.c:374 src/lxc_driver.c:420
#: src/lxc_driver.c:445 src/openvz_driver.c:350 src/openvz_driver.c:389
#: src/openvz_driver.c:433 src/openvz_driver.c:470 src/openvz_driver.c:909
#: src/openvz_driver.c:951 src/openvz_driver.c:982 src/openvz_driver.c:1054
#: src/uml_driver.c:1330 src/uml_driver.c:1453 src/uml_driver.c:1493
#: src/uml_driver.c:1565 src/uml_driver.c:1626 src/uml_driver.c:1670
#: src/uml_driver.c:1696 src/uml_driver.c:1769
#, fuzzy
msgid "no domain with matching uuid"
msgstr "區域 id 或 uuid"
#: src/lxc_driver.c:333 src/openvz_driver.c:914 src/qemu_driver.c:3507
#: src/uml_driver.c:1632
#, fuzzy
msgid "cannot delete active domain"
msgstr "非作用中區域的名稱"
#: src/lxc_driver.c:339 src/qemu_driver.c:3513 src/uml_driver.c:1638
#, fuzzy
msgid "cannot undefine transient domain"
msgstr "取消定義非作用中的區域"
#: src/lxc_driver.c:385
#, fuzzy, c-format
msgid "Unable to get cgroup for %s\n"
msgstr "無法從 %s 建立區域"
#: src/lxc_driver.c:487
#, fuzzy, c-format
msgid "waitpid failed to wait for container %d: %d"
msgstr "無法開啟區域 %s"
#: src/lxc_driver.c:569
#, fuzzy
msgid "failed to get bridge for interface"
msgstr "無法取得節點資訊"
#: src/lxc_driver.c:580
#, fuzzy, c-format
msgid "failed to create veth device pair: %d"
msgstr "無法從 %s 建立區域"
#: src/lxc_driver.c:593
#, fuzzy
msgid "failed to allocate veth names"
msgstr "無法分配節點"
#: src/lxc_driver.c:599
#, fuzzy, c-format
msgid "failed to add %s device to %s"
msgstr "無法從 %s 建立區域"
#: src/lxc_driver.c:606
#, fuzzy
msgid "failed to enable parent ns veth device"
msgstr "無法從 %s 建立區域"
#: src/lxc_driver.c:636
#, fuzzy
msgid "failed to create client socket"
msgstr "無法寫入插槽 %d\n"
#: src/lxc_driver.c:646
#, fuzzy
msgid "failed to connect to client socket"
msgstr "無法連上 Xen Store"
#: src/lxc_driver.c:671
#, fuzzy, c-format
msgid "invalid PID %d for container"
msgstr "無效的區域指標,於 "
#: src/lxc_driver.c:678
#, fuzzy, c-format
msgid "failed to kill pid %d"
msgstr "無法暫停區域 %s"
#: src/lxc_driver.c:807 src/util.c:702
#, fuzzy, c-format
msgid "cannot wait for '%s'"
msgstr "無法暫停區域 %s"
#: src/lxc_driver.c:814
#, c-format
msgid "container '%s' unexpectedly shutdown during startup"
msgstr ""
#: src/lxc_driver.c:862
#, fuzzy, c-format
msgid "cannot create log directory '%s'"
msgstr "無法寫入設定檔:%s"
#: src/lxc_driver.c:899
#, fuzzy, c-format
msgid "failed to open '%s'"
msgstr "無法暫停區域 %s"
#: src/lxc_driver.c:919
#, fuzzy, c-format
msgid "Failed to read pid file %s/%s.pid"
msgstr "無法讀取描述檔 %s"
#: src/lxc_driver.c:975
#, fuzzy, c-format
msgid "no domain named %s"
msgstr "區域名稱"
#: src/lxc_driver.c:1065 src/lxc_driver.c:1101
#, fuzzy, c-format
msgid "no domain with id %d"
msgstr "節點的區域清單"
#: src/lxc_driver.c:1295
#, fuzzy, c-format
msgid "Unknown release: %s"
msgstr "未知的主機 %s"
#: src/lxc_driver.c:1332 src/lxc_driver.c:1385
#, fuzzy, c-format
msgid "No such domain %s"
msgstr "無法繼續區域 %s"
#: src/lxc_driver.c:1347
#, fuzzy, c-format
msgid "Invalid parameter `%s'"
msgstr "無效的參數,於 %s"
#: src/lxc_driver.c:1375
#, fuzzy
msgid "Invalid parameter count"
msgstr "無效的參數,於 "
#: src/lxc_driver.c:1414 src/qemu_driver.c:2093 src/qemu_driver.c:4686
#, fuzzy
msgid "failed to determine host name"
msgstr "無法取得 hypervisor 類型"
#: src/network_conf.c:260
#, fuzzy, c-format
msgid "cannot parse MAC address '%s'"
msgstr "無效的參數,於 %s"
#: src/network_conf.c:267
#, c-format
msgid "cannot use name address '%s'"
msgstr ""
#: src/network_conf.c:283 src/network_conf.c:371
#, c-format
msgid "cannot parse IP address '%s'"
msgstr ""
#: src/network_conf.c:377
#, c-format
msgid "cannot parse netmask '%s'"
msgstr ""
#: src/network_conf.c:401
msgid "Forwarding requested, but no IPv4 address/netmask provided"
msgstr ""
#: src/network_conf.c:409
#, fuzzy, c-format
msgid "unknown forwarding type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/network_conf.c:742
#, c-format
msgid "Network config filename '%s' does not match network name '%s'"
msgstr ""
#: src/network_conf.c:835
#, fuzzy, c-format
msgid "cannot remove config file '%s'"
msgstr "無法寫入設定檔:%s"
#: src/network_conf.c:909
#, c-format
msgid "Bridge generation exceeded max id %d"
msgstr ""
#: src/network_conf.c:923
#, fuzzy, c-format
msgid "bridge name '%s' already in use."
msgstr "區域 %s 已經存在"
#: src/network_driver.c:177
#, fuzzy, c-format
msgid "Failed to autostart network '%s': %s\n"
msgstr "無法開啟網路 %s"
#: src/network_driver.c:245
msgid "cannot initialize bridge support"
msgstr ""
#: src/network_driver.c:270
#, fuzzy
msgid "networkStartup: out of memory\n"
msgstr "記憶體不足"
#: src/network_driver.c:300
msgid "Reloading iptables rules\n"
msgstr ""
#: src/network_driver.c:516
msgid "cannot start dhcp daemon without IP address for server"
msgstr ""
#: src/network_driver.c:522 src/network_driver.c:528
#, fuzzy, c-format
msgid "cannot create directory %s"
msgstr "無法從 %s 建立網路"
#: src/network_driver.c:581
#, fuzzy, c-format
msgid "failed to add iptables rule to allow forwarding from '%s'"
msgstr "無法將區域 %s 存至 %s"
#: src/network_driver.c:592
#, fuzzy, c-format
msgid "failed to add iptables rule to allow forwarding to '%s'"
msgstr "無法將區域 %s 存至 %s"
#: src/network_driver.c:602
#, fuzzy, c-format
msgid "failed to add iptables rule to enable masquerading to '%s'\n"
msgstr "無法將區域 %s 存至 %s"
#: src/network_driver.c:634
#, fuzzy, c-format
msgid "failed to add iptables rule to allow routing from '%s'"
msgstr "無法將區域 %s 存至 %s"
#: src/network_driver.c:645
#, fuzzy, c-format
msgid "failed to add iptables rule to allow routing to '%s'"
msgstr "無法將區域 %s 存至 %s"
#: src/network_driver.c:671 src/network_driver.c:678
#, fuzzy, c-format
msgid "failed to add iptables rule to allow DHCP requests from '%s'"
msgstr "無法將區域 %s 存至 %s"
#: src/network_driver.c:686 src/network_driver.c:693
#, fuzzy, c-format
msgid "failed to add iptables rule to allow DNS requests from '%s'"
msgstr "無法將區域 %s 存至 %s"
#: src/network_driver.c:703
#, fuzzy, c-format
msgid "failed to add iptables rule to block outbound traffic from '%s'"
msgstr "無法將區域 %s 存至 %s"
#: src/network_driver.c:710
#, fuzzy, c-format
msgid "failed to add iptables rule to block inbound traffic to '%s'"
msgstr "無法將區域 %s 存至 %s"
#: src/network_driver.c:718
#, fuzzy, c-format
msgid "failed to add iptables rule to allow cross bridge traffic on '%s'"
msgstr "無法將區域 %s 存至 %s"
#: src/network_driver.c:806
#, fuzzy
msgid "network is already active"
msgstr "區域已經啟動"
#: src/network_driver.c:812
#, fuzzy, c-format
msgid "cannot create bridge '%s'"
msgstr "無法寫入設定檔:%s"
#: src/network_driver.c:826
#, fuzzy, c-format
msgid "cannot set IP address on bridge '%s' to '%s'"
msgstr "無法暫停區域 %s"
#: src/network_driver.c:834
#, fuzzy, c-format
msgid "cannot set netmask on bridge '%s' to '%s'"
msgstr "無法暫停區域 %s"
#: src/network_driver.c:842
#, fuzzy, c-format
msgid "failed to bring the bridge '%s' up"
msgstr "無法暫停區域 %s"
#: src/network_driver.c:853
#, fuzzy
msgid "failed to enable IP forwarding"
msgstr "無法開啟要讀取的 %s"
#: src/network_driver.c:884 src/network_driver.c:925
#, fuzzy, c-format
msgid "Failed to bring down bridge '%s' : %s\n"
msgstr "無法暫停區域 %s"
#: src/network_driver.c:891 src/network_driver.c:930
#, fuzzy, c-format
msgid "Failed to delete bridge '%s' : %s\n"
msgstr "無法暫停區域 %s"
#: src/network_driver.c:905
#, fuzzy, c-format
msgid "Shutting down network '%s'\n"
msgstr "無法取得網路「%s」"
#: src/network_driver.c:963 src/network_driver.c:1188
#: src/network_driver.c:1227 src/network_driver.c:1250
#: src/network_driver.c:1278 src/network_driver.c:1333
#: src/network_driver.c:1359
msgid "no network with matching uuid"
msgstr ""
#: src/network_driver.c:986
msgid "no network with matching name"
msgstr ""
#: src/network_driver.c:1194
#, fuzzy
msgid "network is still active"
msgstr "區域還在執行中"
#: src/network_driver.c:1301
#, fuzzy
msgid "no network with matching id"
msgstr "XML 格式的網路資訊"
#: src/network_driver.c:1307
#, fuzzy, c-format
msgid "network '%s' does not have a bridge name."
msgstr "網路 %s 已開啟\n"
#: src/network_driver.c:1376
#, fuzzy, c-format
msgid "cannot create autostart directory '%s'"
msgstr "無法從 %s 建立網路"
#: src/network_driver.c:1383 src/storage_driver.c:971
#, fuzzy, c-format
msgid "Failed to create symlink '%s' to '%s'"
msgstr "無法將區域 %s 存至 %s"
#: src/network_driver.c:1390 src/qemu_driver.c:4168 src/storage_driver.c:979
#: src/uml_driver.c:1733
#, fuzzy, c-format
msgid "Failed to delete symlink '%s'"
msgstr "無法暫停區域 %s"
#: src/node_device.c:149 src/node_device.c:174 src/node_device.c:208
#: src/node_device.c:238
msgid "no node device with matching name"
msgstr ""
#: src/node_device.c:184
#, fuzzy
msgid "no parent for this device"
msgstr "無法解開執行中 %s hypervisor 的版本\n"
#: src/node_device_conf.c:436
#, fuzzy, c-format
msgid "no block device path supplied for '%s'"
msgstr "未知的作業系統類型 %s"
#: src/node_device_conf.c:448
#, c-format
msgid "error parsing storage capabilities for '%s'"
msgstr ""
#: src/node_device_conf.c:458
#, c-format
msgid "missing storage capability type for '%s'"
msgstr ""
#: src/node_device_conf.c:478
#, c-format
msgid "no removable media size supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:479
#, c-format
msgid "invalid removable media size supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:489
#, fuzzy, c-format
msgid "unknown storage capability type '%s' for '%s'"
msgstr "未知的作業系統類型 %s"
#: src/node_device_conf.c:501
#, fuzzy, c-format
msgid "no size supplied for '%s'"
msgstr "無法暫停區域 %s"
#: src/node_device_conf.c:502
#, c-format
msgid "invalid size supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:529 src/node_device_conf.c:574
#, c-format
msgid "no SCSI host ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:530 src/node_device_conf.c:575
#, c-format
msgid "invalid SCSI host ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:535
#, c-format
msgid "no SCSI bus ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:536
#, c-format
msgid "invalid SCSI bus ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:541
#, c-format
msgid "no SCSI target ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:542
#, c-format
msgid "invalid SCSI target ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:547
#, c-format
msgid "no SCSI LUN ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:548
#, c-format
msgid "invalid SCSI LUN ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:601
#, fuzzy, c-format
msgid "no network interface supplied for '%s'"
msgstr "網路名稱"
#: src/node_device_conf.c:616
#, fuzzy, c-format
msgid "invalid network type supplied for '%s'"
msgstr "無效的網路指標,於 %s"
#: src/node_device_conf.c:644
#, c-format
msgid "no USB interface number supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:645
#, c-format
msgid "invalid USB interface number supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:650
#, c-format
msgid "no USB interface class supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:651
#, c-format
msgid "invalid USB interface class supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:656
#, c-format
msgid "no USB interface subclass supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:657
#, c-format
msgid "invalid USB interface subclass supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:662
#, fuzzy, c-format
msgid "no USB interface protocol supplied for '%s'"
msgstr "未知的作業系統類型 %s"
#: src/node_device_conf.c:663
#, fuzzy, c-format
msgid "invalid USB interface protocol supplied for '%s'"
msgstr "無效的網路指標,於 %s"
#: src/node_device_conf.c:713
#, c-format
msgid "no USB bus number supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:714
#, c-format
msgid "invalid USB bus number supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:719
#, c-format
msgid "no USB device number supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:720
#, fuzzy, c-format
msgid "invalid USB device number supplied for '%s'"
msgstr "無效的區域指標,於 %s"
#: src/node_device_conf.c:725
#, c-format
msgid "no USB vendor ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:726
#, c-format
msgid "invalid USB vendor ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:731
#, c-format
msgid "no USB product ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:732
#, c-format
msgid "invalid USB product ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:759
#, c-format
msgid "no PCI domain ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:760
#, fuzzy, c-format
msgid "invalid PCI domain ID supplied for '%s'"
msgstr "無效的區域指標,於 %s"
#: src/node_device_conf.c:765
#, c-format
msgid "no PCI bus ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:766
#, c-format
msgid "invalid PCI bus ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:771
#, c-format
msgid "no PCI slot ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:772
#, c-format
msgid "invalid PCI slot ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:777
#, c-format
msgid "no PCI function ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:778
#, fuzzy, c-format
msgid "invalid PCI function ID supplied for '%s'"
msgstr "無效的連線指標,於 %s"
#: src/node_device_conf.c:783
#, c-format
msgid "no PCI vendor ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:784
#, c-format
msgid "invalid PCI vendor ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:789
#, c-format
msgid "no PCI product ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:790
#, c-format
msgid "invalid PCI product ID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:825
#, c-format
msgid "no system UUID supplied for '%s'"
msgstr ""
#: src/node_device_conf.c:831
#, c-format
msgid "malformed uuid element for '%s'"
msgstr ""
#: src/node_device_conf.c:865
#, fuzzy
msgid "missing capability type"
msgstr "找不到 root 裝置的資訊"
#: src/node_device_conf.c:871
#, fuzzy, c-format
msgid "unknown capability type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/node_device_conf.c:905
#, fuzzy, c-format
msgid "unknown capability type '%d' for '%s'"
msgstr "未知的作業系統類型 %s"
#: src/node_device_conf.c:947
#, c-format
msgid "no device capabilities for '%s'"
msgstr ""
#: src/nodeinfo.c:78
msgid "parsing cpuinfo processor"
msgstr ""
#: src/nodeinfo.c:91
msgid "parsing cpuinfo cpu MHz"
msgstr ""
#: src/nodeinfo.c:120
#, fuzzy
msgid "no cpus found"
msgstr "節點的處理器 numa 節點"
#: src/nodeinfo.c:158 src/uml_driver.c:1794 src/util.c:302
#, fuzzy, c-format
msgid "cannot open %s"
msgstr "無法暫停區域 %s"
#: src/openvz_conf.c:131
#, fuzzy
msgid "Cound not extract vzctl version"
msgstr "無法解開執行中 %s hypervisor 的版本\n"
#: src/openvz_conf.c:198
#, c-format
msgid "Cound not read 'IP_ADDRESS' from config for container %d"
msgstr ""
#: src/openvz_conf.c:230
#, c-format
msgid "Cound not read 'NETIF' from config for container %d"
msgstr ""
#: src/openvz_conf.c:257
#, fuzzy
msgid "Too long network device name"
msgstr "解析區域的檔名"
#: src/openvz_conf.c:271
msgid "Too long bridge device name"
msgstr ""
#: src/openvz_conf.c:285
#, fuzzy
msgid "Wrong length MAC address"
msgstr "無效的參數,於 %s"
#: src/openvz_conf.c:292
#, fuzzy
msgid "Wrong MAC address"
msgstr "無效的參數,於 %s"
#: src/openvz_conf.c:359
#, c-format
msgid "Cound not read 'OSTEMPLATE' from config for container %d"
msgstr ""
#: src/openvz_conf.c:373
#, c-format
msgid "Cound not read 'VE_PRIVATE' from config for container %d"
msgstr ""
#: src/openvz_conf.c:434
#, fuzzy
msgid "popen failed"
msgstr "操作失敗"
#: src/openvz_conf.c:444
msgid "Failed to parse vzlist output"
msgstr ""
#: src/openvz_conf.c:477
msgid "UUID in config file malformed"
msgstr ""
#: src/openvz_conf.c:489
#, c-format
msgid "Cound not read config for container %d"
msgstr ""
#: src/openvz_conf.c:532
msgid "Cound not read nodeinfo"
msgstr ""
#: src/openvz_driver.c:110
#, fuzzy
msgid "Container is not defined"
msgstr "區域 %s 已經取消定義\n"
#: src/openvz_driver.c:152 src/openvz_driver.c:657
#, fuzzy, c-format
msgid "Could not put argument to %s"
msgstr "無法連上 %s"
#: src/openvz_driver.c:170
msgid "only one filesystem supported"
msgstr ""
#: src/openvz_driver.c:179
msgid "filesystem is not of type 'template' or 'mount'"
msgstr ""
#: src/openvz_driver.c:190
#, fuzzy
msgid "Could not convert domain name to VEID"
msgstr "將區域名稱或 ID 轉為 UUID"
#: src/openvz_driver.c:196
#, fuzzy
msgid "Could not copy default config"
msgstr "無法連上 %s"
#: src/openvz_driver.c:202
msgid "Could not set the source dir for the filesystem"
msgstr ""
#: src/openvz_driver.c:210
msgid "Error creating command for container"
msgstr ""
#: src/openvz_driver.c:216 src/openvz_driver.c:644 src/openvz_driver.c:828
#: src/openvz_driver.c:883 src/openvz_driver.c:921 src/openvz_driver.c:957
#: src/openvz_driver.c:1034 src/openvz_driver.c:1170 src/openvz_driver.c:1221
#, fuzzy, c-format
msgid "Could not exec %s"
msgstr "無法連上 %s"
#: src/openvz_driver.c:361
#, c-format
msgid "cannot read cputime for domain %d"
msgstr ""
#: src/openvz_driver.c:440 src/openvz_driver.c:477
#, fuzzy
msgid "domain is not in running state"
msgstr "區域還在執行中"
#: src/openvz_driver.c:558
msgid "Container ID is not specified"
msgstr ""
#: src/openvz_driver.c:591
msgid "Could not generate eth name for container"
msgstr ""
#: src/openvz_driver.c:602
msgid "Could not generate veth name"
msgstr ""
#: src/openvz_driver.c:686
#, fuzzy
msgid "Could not configure network"
msgstr "無法連上 %s"
#: src/openvz_driver.c:697
msgid "cannot replace NETIF config"
msgstr ""
#: src/openvz_driver.c:734
#, c-format
msgid "Already an OPENVZ VM active with the id '%s'"
msgstr ""
#: src/openvz_driver.c:744 src/openvz_driver.c:811
#, fuzzy
msgid "Error creating intial configuration"
msgstr "分配設定"
#: src/openvz_driver.c:752 src/openvz_driver.c:817
#, fuzzy
msgid "Could not set UUID"
msgstr "無法連上 %s"
#: src/openvz_driver.c:762 src/openvz_driver.c:839
#, fuzzy
msgid "Could not set number of virtual cpu"
msgstr "改變虛擬處理器的數量"
#: src/openvz_driver.c:801
#, c-format
msgid "Already an OPENVZ VM defined with the id '%s'"
msgstr ""
#: src/openvz_driver.c:870
msgid "no domain with matching id"
msgstr ""
#: src/openvz_driver.c:876
msgid "domain is not in shutoff state"
msgstr ""
#: src/openvz_driver.c:988
#, fuzzy
msgid "Could not read container config"
msgstr "無法連上 %s"
#: src/openvz_driver.c:1008 src/qemu_driver.c:1863
#, fuzzy, c-format
msgid "unknown type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/openvz_driver.c:1060
msgid "VCPUs should be >= 1"
msgstr ""
#: src/openvz_driver.c:1179 src/openvz_driver.c:1230
#, fuzzy, c-format
msgid "Could not parse VPS ID %s"
msgstr "無法連上 %s"
#: src/pci.c:142
#, fuzzy, c-format
msgid "Failed to open config space file '%s': %s"
msgstr "無法暫停區域 %s"
#: src/pci.c:162
#, fuzzy, c-format
msgid "Failed to read from '%s' : %s"
msgstr "無法讀取描述檔 %s"
#: src/pci.c:202
#, fuzzy, c-format
msgid "Failed to write to '%s' : %s"
msgstr "無法暫停區域 %s"
#: src/pci.c:575
#, fuzzy, c-format
msgid "Failed to open config space file '%s'"
msgstr "無法暫停區域 %s"
#: src/pci.c:612
#, c-format
msgid "No PCI reset capability available for %s"
msgstr ""
#: src/pci.c:665
#, fuzzy, c-format
msgid "failed to load pci-stub or pciback drivers: %s"
msgstr "無法為網路 %s 取消定義"
#: src/pci.c:694
#, fuzzy, c-format
msgid "Failed to add PCI device ID '%s' to %s"
msgstr "無法從 %s 建立區域"
#: src/pci.c:707
#, fuzzy, c-format
msgid "Failed to unbind PCI device '%s'"
msgstr "無法連上 hypervisor"
#: src/pci.c:720
#, fuzzy, c-format
msgid "Failed to add slot for PCI device '%s' to %s"
msgstr "無法從 %s 建立區域"
#: src/pci.c:728 src/pci.c:775
#, fuzzy, c-format
msgid "Failed to bind PCI device '%s' to %s"
msgstr "無法從 %s 建立區域"
#: src/pci.c:740
#, fuzzy, c-format
msgid "Failed to remove PCI ID '%s' from %s"
msgstr "無法從 %s 建立區域"
#: src/pci.c:754 src/pci.c:815
msgid "cannot find any PCI stub module"
msgstr ""
#: src/pci.c:785
#, fuzzy, c-format
msgid "Failed to remove slot for PCI device '%s' to %s"
msgstr "無法從 %s 建立區域"
#: src/pci.c:800
#, fuzzy, c-format
msgid "Failed to trigger a re-probe for PCI device '%s'"
msgstr "無法為網路 %s 取消定義"
#: src/pci.c:880
#, fuzzy, c-format
msgid "Failed to read product/vendor ID for %s"
msgstr "無法從 %s 建立區域"
#: src/proxy_internal.c:250
#, c-format
msgid "Failed to close socket %d\n"
msgstr "無法關閉插槽 %d\n"
#: src/proxy_internal.c:307
#, c-format
msgid "Failed to write to socket %d\n"
msgstr "無法寫入插槽 %d\n"
#: src/proxy_internal.c:389
#, fuzzy
msgid "failed to write proxy request"
msgstr "無法寫入插槽 %d\n"
#: src/proxy_internal.c:400 src/proxy_internal.c:423
#, fuzzy
msgid "failed to read proxy reply"
msgstr "無法讀取插槽 %d\n"
#: src/proxy_internal.c:405 src/proxy_internal.c:428 src/proxy_internal.c:446
#, c-format
msgid "Communication error with proxy: got %d bytes of %d\n"
msgstr "使用代理伺服器時通訊錯誤:取得 %d 的位元組(自 %d 處)\n"
#: src/proxy_internal.c:412
#, c-format
msgid "Communication error with proxy: expected %d bytes got %d\n"
msgstr "使用代理伺服器時通訊錯誤:預期 %d 個位元組取得 %d\n"
#: src/proxy_internal.c:436
#, c-format
msgid "Communication error with proxy: got %d bytes packet\n"
msgstr "使用代理伺服器時通訊錯誤:取得 %d 位元組的封包\n"
#: src/proxy_internal.c:458
msgid "Communication error with proxy: malformed packet\n"
msgstr "使用代理伺服器時通訊錯誤:封包格式錯誤\n"
#: src/proxy_internal.c:462
#, c-format
msgid "got asynchronous packet number %d\n"
msgstr "取得非同步的封包號碼 %d\n"
#: src/qemu_conf.c:516
#, c-format
msgid "Unexpected exit status from qemu %d pid %lu"
msgstr ""
#: src/qemu_conf.c:524
#, c-format
msgid "Unexpected exit status '%d', qemu probably failed"
msgstr ""
#: src/qemu_conf.c:564
#, c-format
msgid "Cannot find QEMU binary %s: %s"
msgstr ""
#: src/qemu_conf.c:597
#, fuzzy, c-format
msgid "Network '%s' not found"
msgstr "網路名稱或 uuid"
#: src/qemu_conf.c:612
#, fuzzy, c-format
msgid "Network type %d is not supported"
msgstr "網路 %s 已開啟\n"
#: src/qemu_conf.c:629
#, c-format
msgid "cannot initialize bridge support: %s"
msgstr ""
#: src/qemu_conf.c:639
#, c-format
msgid "Failed to add tap interface to bridge. %s is not a bridge device"
msgstr ""
#: src/qemu_conf.c:643
#, fuzzy, c-format
msgid "Failed to add tap interface '%s' to bridge '%s' : %s"
msgstr "無法取得節點資訊"
#: src/qemu_conf.c:794
#, fuzzy
msgid "TCP migration is not supported with this QEMU binary"
msgstr "不支援 hypervisor"
#: src/qemu_conf.c:802 src/qemu_conf.c:808
msgid "STDIO migration is not supported with this QEMU binary"
msgstr ""
#: src/qemu_conf.c:1062
#, fuzzy, c-format
msgid "unsupported driver name '%s' for disk '%s'"
msgstr "無預期的資料「%s」"
#: src/qemu_conf.c:1102 src/qemu_conf.c:1172
#, c-format
msgid "unsupported usb disk type for '%s'"
msgstr ""
#: src/qemu_conf.c:1110 src/qemu_conf.c:1191 src/uml_conf.c:273
#, fuzzy, c-format
msgid "unsupported disk type '%s'"
msgstr "無預期的資料「%s」"
#: src/qemu_conf.c:1440
msgid "invalid sound model"
msgstr ""
#: src/qemu_conf.c:1627
#, fuzzy
msgid "invalid domain state"
msgstr "無效的區域指標,於 %s"
#: src/qemu_conf.c:1636
#, fuzzy
msgid "invalid pid"
msgstr "無效的參數,於 "
#: src/qemu_conf.c:1643
msgid "no monitor path"
msgstr ""
#: src/qemu_conf.c:1650
#, fuzzy
msgid "no domain config"
msgstr "節點的區域清單"
#: src/qemu_driver.c:153 src/qemu_driver.c:185 src/uml_driver.c:774
#, fuzzy, c-format
msgid "failed to create logfile %s"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:159 src/qemu_driver.c:191 src/uml_driver.c:783
msgid "Unable to set VM logfile close-on-exec flag"
msgstr ""
#: src/qemu_driver.c:177
#, fuzzy, c-format
msgid "failed to build logfile name %s/%s.log"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:197
#, fuzzy, c-format
msgid "Unable to seek to %lld in %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:226 src/uml_driver.c:144
#, fuzzy, c-format
msgid "Failed to autostart VM '%s': %s\n"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:268
#, fuzzy, c-format
msgid "Failed to unlink status file %s"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:313
#, fuzzy, c-format
msgid "Failed to read domain status for %s\n"
msgstr "無法從 %s 建立區域"
#: src/qemu_driver.c:323
#, fuzzy, c-format
msgid "Failed to parse domain status for %s\n"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:329
#, fuzzy, c-format
msgid "Failed to reconnect monitor for %s: %d\n"
msgstr "無法從 %s 建立網路"
#: src/qemu_driver.c:374
#, fuzzy
msgid "Failed to start security driver"
msgstr "區域目前的記憶體"
#: src/qemu_driver.c:379
msgid "No security driver available"
msgstr ""
#: src/qemu_driver.c:399
#, fuzzy, c-format
msgid "Failed to copy secModel model: %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:407
#, fuzzy, c-format
msgid "Failed to copy secModel DOI: %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:483
#, fuzzy, c-format
msgid "Failed to create state dir '%s': %s\n"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:685 src/qemu_driver.c:698 src/qemu_driver.c:709
#, c-format
msgid "Failure while reading %s startup output"
msgstr ""
#: src/qemu_driver.c:693
#, c-format
msgid "Timed out while reading %s startup output"
msgstr ""
#: src/qemu_driver.c:727
#, c-format
msgid "Out of space while reading %s startup output"
msgstr ""
#: src/qemu_driver.c:758
#, c-format
msgid "Out of space while reading %s log output"
msgstr ""
#: src/qemu_driver.c:765
#, c-format
msgid "Failure while reading %s log output"
msgstr ""
#: src/qemu_driver.c:779
#, c-format
msgid "Timed out while reading %s log output"
msgstr ""
#: src/qemu_driver.c:808
#, c-format
msgid "Unable to open monitor path %s"
msgstr ""
#: src/qemu_driver.c:813
msgid "Unable to set monitor close-on-exec flag"
msgstr ""
#: src/qemu_driver.c:818
msgid "Unable to put monitor into non-blocking mode"
msgstr ""
#: src/qemu_driver.c:968 src/qemu_driver.c:1543
#, fuzzy, c-format
msgid "Unable to close logfile: %s\n"
msgstr "無法關閉插槽 %d\n"
#: src/qemu_driver.c:977
#, fuzzy, c-format
msgid "unable to start guest: %s"
msgstr "無法關閉插槽 %d\n"
#: src/qemu_driver.c:1007
msgid "cannot run monitor command to fetch CPU thread info"
msgstr ""
#: src/qemu_driver.c:1111
#, fuzzy
msgid "failed to set CPU affinity"
msgstr "無法取得區域「%s」"
#: src/qemu_driver.c:1121 src/qemu_driver.c:2277
#, fuzzy
msgid "resume operation failed"
msgstr "操作失敗"
#: src/qemu_driver.c:1154
msgid "setting VNC password failed"
msgstr ""
#: src/qemu_driver.c:1296
#, fuzzy
msgid "Failed to set security label"
msgstr "區域目前的記憶體"
#: src/qemu_driver.c:1329 src/uml_driver.c:738
#, fuzzy
msgid "VM is already active"
msgstr "區域已經啟動"
#: src/qemu_driver.c:1347
msgid "Unable to find an unused VNC port"
msgstr ""
#: src/qemu_driver.c:1355 src/uml_driver.c:760
#, c-format
msgid "cannot create log directory %s"
msgstr ""
#: src/qemu_driver.c:1375
#, c-format
msgid "Cannot find QEMU binary %s"
msgstr ""
#: src/qemu_driver.c:1384 src/qemu_driver.c:3619
#, c-format
msgid "Cannot determine QEMU argv syntax %s"
msgstr ""
#: src/qemu_driver.c:1394
#, fuzzy, c-format
msgid "Cannot remove stale PID file for %s"
msgstr "無法寫入設定檔:%s"
#: src/qemu_driver.c:1409 src/qemu_driver.c:1412 src/uml_driver.c:798
#: src/uml_driver.c:801
#, fuzzy, c-format
msgid "Unable to write envv to logfile: %s\n"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:1419 src/qemu_driver.c:1422 src/qemu_driver.c:1427
#: src/uml_driver.c:808 src/uml_driver.c:811 src/uml_driver.c:816
#, fuzzy, c-format
msgid "Unable to write argv to logfile: %s\n"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:1431
#, fuzzy, c-format
msgid "Unable to seek to end of logfile: %s\n"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:1459
#, fuzzy, c-format
msgid "Domain %s didn't show up\n"
msgstr "區域 %s 正在執行關機\n"
#: src/qemu_driver.c:1464
msgid "Unable to daemonize QEMU process"
msgstr ""
#: src/qemu_driver.c:1528
#, c-format
msgid "Shutting down VM '%s'\n"
msgstr ""
#: src/qemu_driver.c:1533
#, fuzzy, c-format
msgid "Failed to send SIGTERM to %s (%d)"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:1566
#, fuzzy, c-format
msgid "Failed to remove domain status for %s"
msgstr "無法從 %s 建立區域"
#: src/qemu_driver.c:1571
#, fuzzy, c-format
msgid "Failed to remove PID file for %s: %s"
msgstr "無法從 %s 建立區域"
#: src/qemu_driver.c:1619
#, c-format
msgid "unhandled fd event %d for %s"
msgstr ""
#: src/qemu_driver.c:1836
#, fuzzy, c-format
msgid "Unable to open %s"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:1899 src/qemu_driver.c:1936 src/uml_driver.c:974
#: src/uml_driver.c:1005
msgid "NUMA not supported on this host"
msgstr ""
#: src/qemu_driver.c:1905
#, c-format
msgid "start cell %d out of range (0-%d)"
msgstr ""
#: src/qemu_driver.c:1917 src/qemu_driver.c:1944 src/uml_driver.c:985
#: src/uml_driver.c:1013
#, fuzzy
msgid "Failed to query NUMA free memory"
msgstr "已使用的記憶體:"
#: src/qemu_driver.c:2004 src/uml_driver.c:1270 src/uml_driver.c:1300
#: src/vbox/vbox_tmpl.c:542
#, c-format
msgid "no domain with matching id %d"
msgstr ""
#: src/qemu_driver.c:2031 src/qemu_driver.c:2213 src/qemu_driver.c:2266
#: src/qemu_driver.c:2317 src/qemu_driver.c:2348 src/qemu_driver.c:2385
#: src/qemu_driver.c:2412 src/qemu_driver.c:2437 src/qemu_driver.c:2560
#: src/qemu_driver.c:2601 src/qemu_driver.c:2753 src/qemu_driver.c:2888
#: src/qemu_driver.c:3082 src/qemu_driver.c:3116 src/qemu_driver.c:3330
#: src/qemu_driver.c:3409 src/qemu_driver.c:3501 src/qemu_driver.c:3897
#: src/qemu_driver.c:4049 src/qemu_driver.c:4103 src/qemu_driver.c:4131
#: src/qemu_driver.c:4211 src/qemu_driver.c:4349 src/qemu_driver.c:4415
#: src/qemu_driver.c:4489 src/qemu_driver.c:4822 src/uml_driver.c:1358
#: src/uml_driver.c:1383 src/uml_driver.c:1416
#, c-format
msgid "no domain with matching uuid '%s'"
msgstr ""
#: src/qemu_driver.c:2056 src/qemu_driver.c:4951
#, fuzzy, c-format
msgid "no domain with matching name '%s'"
msgstr "區域 id 或 uuid"
#: src/qemu_driver.c:2151 src/uml_driver.c:1219
#, fuzzy, c-format
msgid "domain '%s' is already defined"
msgstr "區域 %s 已經存在"
#: src/qemu_driver.c:2161 src/uml_driver.c:1229
#, fuzzy, c-format
msgid "domain with uuid '%s' is already defined"
msgstr "區域 %s 已經存在"
#: src/qemu_driver.c:2218 src/qemu_driver.c:2271 src/qemu_driver.c:2759
#: src/qemu_driver.c:4216 src/qemu_driver.c:4355 src/qemu_driver.c:4501
#: src/qemu_driver.c:4828
#, fuzzy
msgid "domain is not running"
msgstr "區域還在執行中"
#: src/qemu_driver.c:2224 src/qemu_driver.c:2768
#, fuzzy
msgid "suspend operation failed"
msgstr "操作失敗"
#: src/qemu_driver.c:2323 src/uml_driver.c:1277
#, fuzzy
msgid "shutdown operation failed"
msgstr "操作失敗"
#: src/qemu_driver.c:2443 src/uml_driver.c:1389
msgid "cannot set max memory lower than current memory"
msgstr ""
#: src/qemu_driver.c:2476
#, fuzzy
msgid "could not query memory balloon allocation"
msgstr "改變記憶體分配"
#: src/qemu_driver.c:2487
#, fuzzy
msgid "could not parse memory balloon allocation"
msgstr "無法連上 %s"
#: src/qemu_driver.c:2526
#, fuzzy
msgid "could not balloon memory allocation"
msgstr "改變記憶體分配"
#: src/qemu_driver.c:2566 src/uml_driver.c:1428
msgid "cannot set memory higher than max memory"
msgstr ""
#: src/qemu_driver.c:2574 src/uml_driver.c:1422
#, fuzzy
msgid "cannot set memory of an active domain"
msgstr "非作用中區域的名稱"
#: src/qemu_driver.c:2780
#, fuzzy
msgid "failed to get domain xml"
msgstr "無法取得區域 UUID"
#: src/qemu_driver.c:2788
#, fuzzy, c-format
msgid "failed to create '%s'"
msgstr "無法讀取插槽 %d\n"
#: src/qemu_driver.c:2794
#, fuzzy
msgid "failed to write save header"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:2800
#, fuzzy
msgid "failed to write xml"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:2806
#, fuzzy, c-format
msgid "unable to save file %s"
msgstr "無法關閉插槽 %d\n"
#: src/qemu_driver.c:2828 src/qemu_driver.c:4871
#, fuzzy
msgid "migrate operation failed"
msgstr "操作失敗"
#: src/qemu_driver.c:2839
msgid "'migrate' not supported by this qemu"
msgstr ""
#: src/qemu_driver.c:2894
#, fuzzy
msgid "cannot change vcpu count of an active domain"
msgstr "為非作用中的區域取消定義。"
#: src/qemu_driver.c:2900 src/qemu_driver.c:3088 src/qemu_driver.c:3122
#, c-format
msgid "unknown virt type in domain definition '%d'"
msgstr ""
#: src/qemu_driver.c:2907
msgid "could not determine max vcpus for the domain"
msgstr ""
#: src/qemu_driver.c:2913
#, c-format
msgid ""
"requested vcpus is greater than max allowable vcpus for the domain: %d > %d"
msgstr ""
#: src/qemu_driver.c:2947 src/qemu_driver.c:3008
#, fuzzy
msgid "cannot pin vcpus on an inactive domain"
msgstr "取消定義非作用中的區域"
#: src/qemu_driver.c:2953
#, c-format
msgid "vcpu number out of range %d > %d"
msgstr ""
#: src/qemu_driver.c:2974
#, fuzzy
msgid "cannot set affinity"
msgstr "無法連上 %s"
#: src/qemu_driver.c:2979
msgid "cpu affinity is not supported"
msgstr ""
#: src/qemu_driver.c:3043
#, fuzzy
msgid "cannot get affinity"
msgstr "節點的區域清單"
#: src/qemu_driver.c:3053
msgid "cpu affinity is not available"
msgstr ""
#: src/qemu_driver.c:3145
#, fuzzy
msgid "Failed to get security label"
msgstr "區域目前的記憶體"
#: src/qemu_driver.c:3170
#, c-format
msgid "security model string exceeds max %d bytes"
msgstr ""
#: src/qemu_driver.c:3179
#, c-format
msgid "security DOI string exceeds max %d bytes"
msgstr ""
#: src/qemu_driver.c:3203
#, fuzzy
msgid "cannot read domain image"
msgstr "節點的區域清單"
#: src/qemu_driver.c:3209
#, fuzzy
msgid "failed to read qemu header"
msgstr "無法從 Xen 系統程式讀取"
#: src/qemu_driver.c:3215
msgid "image magic is incorrect"
msgstr ""
#: src/qemu_driver.c:3221
#, c-format
msgid "image version is not supported (%d > %d)"
msgstr ""
#: src/qemu_driver.c:3233
#, fuzzy
msgid "failed to read XML"
msgstr "無法讀取插槽 %d\n"
#: src/qemu_driver.c:3241 src/qemu_driver.c:4721
#, fuzzy
msgid "failed to parse XML"
msgstr "無法讀取插槽 %d\n"
#: src/qemu_driver.c:3252
#, fuzzy, c-format
msgid "domain is already active as '%s'"
msgstr "區域已經啟動"
#: src/qemu_driver.c:3263 src/qemu_driver.c:4757
#, fuzzy
msgid "failed to assign new VM"
msgstr "無法取得網路 UUID"
#: src/qemu_driver.c:3274
#, fuzzy
msgid "failed to start VM"
msgstr "無法開啟區域 %s"
#: src/qemu_driver.c:3292
#, fuzzy
msgid "failed to resume domain"
msgstr "無法繼續區域 %s"
#: src/qemu_driver.c:3548
#, c-format
msgid "cannot convert disk '%s' to bus/device index"
msgstr ""
#: src/qemu_driver.c:3574
#, c-format
msgid "Unsupported disk name mapping for bus '%s'"
msgstr ""
#: src/qemu_driver.c:3609
#, c-format
msgid "No device with bus '%s' and target '%s'"
msgstr ""
#: src/qemu_driver.c:3636
#, c-format
msgid ""
"Emulator version does not support removable media for device '%s' and target "
"'%s'"
msgstr ""
#: src/qemu_driver.c:3673
#, fuzzy
msgid "could not change cdrom media"
msgstr "無法連上 %s"
#: src/qemu_driver.c:3684
#, fuzzy, c-format
msgid "changing cdrom media failed: %s"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:3711 src/qemu_driver.c:3780
#, c-format
msgid "target %s already exists"
msgstr ""
#: src/qemu_driver.c:3737
#, c-format
msgid "cannot attach %s disk"
msgstr ""
#: src/qemu_driver.c:3751
msgid "Unable to parse slot number\n"
msgstr ""
#: src/qemu_driver.c:3754
#, fuzzy, c-format
msgid "adding %s disk failed"
msgstr "區域 %s 已經存在"
#: src/qemu_driver.c:3805
msgid "cannot attach usb disk"
msgstr ""
#: src/qemu_driver.c:3816
#, fuzzy
msgid "adding usb disk failed"
msgstr "載入主機定義檔"
#: src/qemu_driver.c:3859
msgid "cannot attach usb device"
msgstr ""
#: src/qemu_driver.c:3870
#, fuzzy
msgid "adding usb device failed"
msgstr "載入主機定義檔"
#: src/qemu_driver.c:3904
#, fuzzy
msgid "cannot attach device on inactive domain"
msgstr "取消定義非作用中的區域"
#: src/qemu_driver.c:3930
#, c-format
msgid "disk bus '%s' cannot be hotplugged."
msgstr ""
#: src/qemu_driver.c:3940
#, c-format
msgid "disk device type '%s' cannot be hotplugged"
msgstr ""
#: src/qemu_driver.c:3950
#, c-format
msgid "device type '%s' cannot be attached"
msgstr ""
#: src/qemu_driver.c:3983
#, fuzzy, c-format
msgid "disk %s not found"
msgstr "區域資訊"
#: src/qemu_driver.c:3989
#, c-format
msgid "disk %s cannot be detached - invalid slot number %d"
msgstr ""
#: src/qemu_driver.c:4001
#, fuzzy, c-format
msgid "failed to execute detach disk %s command"
msgstr "無法取得節點資訊"
#: src/qemu_driver.c:4010
#, fuzzy, c-format
msgid "failed to detach disk %s: invalid slot %d"
msgstr "無法從 %s 建立區域"
#: src/qemu_driver.c:4056
#, fuzzy
msgid "cannot detach device on inactive domain"
msgstr "取消定義非作用中的區域"
#: src/qemu_driver.c:4077
msgid "only SCSI or virtio disk device can be detached dynamically"
msgstr ""
#: src/qemu_driver.c:4137 src/uml_driver.c:1702
#, fuzzy
msgid "cannot set autostart for transient domain"
msgstr "自動啟動一個區域"
#: src/qemu_driver.c:4154 src/storage_driver.c:964 src/uml_driver.c:1719
#, fuzzy, c-format
msgid "cannot create autostart directory %s"
msgstr "無法從 %s 建立網路"
#: src/qemu_driver.c:4161 src/uml_driver.c:1726
#, fuzzy, c-format
msgid "Failed to create symlink '%s to '%s'"
msgstr "無法將區域 %s 存至 %s"
#: src/qemu_driver.c:4229
#, fuzzy, c-format
msgid "invalid path: %s"
msgstr "無效的參數,於 %s"
#: src/qemu_driver.c:4240
msgid "'info blockstats' command failed"
msgstr ""
#: src/qemu_driver.c:4253
msgid "'info blockstats' not supported by this qemu"
msgstr ""
#: src/qemu_driver.c:4321
#, fuzzy, c-format
msgid "device not found: %s (%s)"
msgstr "從 %s 回復區域\n"
#: src/qemu_driver.c:4361 src/qemu_driver.c:4421 src/uml_driver.c:1775
msgid "NULL or empty path"
msgstr ""
#: src/qemu_driver.c:4378
#, c-format
msgid "invalid path, '%s' is not a known interface"
msgstr ""
#: src/qemu_driver.c:4440
#, fuzzy, c-format
msgid "%s: failed to open"
msgstr "無法暫停區域 %s"
#: src/qemu_driver.c:4451
#, fuzzy, c-format
msgid "%s: failed to seek or read"
msgstr "無法讀取設定檔 %s"
#: src/qemu_driver.c:4458 src/uml_driver.c:1812
#, fuzzy
msgid "invalid path"
msgstr "無效的參數,於 "
#: src/qemu_driver.c:4495
msgid "QEMU driver only supports virtual memory addrs"
msgstr ""
#: src/qemu_driver.c:4508
#, fuzzy, c-format
msgid "mkstemp(\"%s\") failed"
msgstr "操作失敗:%s"
#: src/qemu_driver.c:4516
msgid "'memsave' command failed"
msgstr ""
#: src/qemu_driver.c:4525
#, fuzzy, c-format
msgid "failed to read temporary file created with template %s"
msgstr "無法寫入設定檔"
#: src/qemu_driver.c:4665
#, fuzzy
msgid "no domain XML passed"
msgstr "節點的區域清單"
#: src/qemu_driver.c:4702
msgid "only tcp URIs are supported for KVM migrations"
msgstr ""
#: src/qemu_driver.c:4712
msgid "URI did not have ':port' at the end"
msgstr ""
#: src/qemu_driver.c:4738
#, fuzzy
msgid "could not generate random UUID"
msgstr "無法取得區域 UUID"
#: src/qemu_driver.c:4747
#, c-format
msgid "domain with the same name or UUID already exists as '%s'"
msgstr ""
#: src/qemu_driver.c:4771
#, fuzzy
msgid "failed to start listening VM"
msgstr "無法開啟區域 %s"
#: src/qemu_driver.c:4836
msgid "off-line migration specified, but suspend operation failed"
msgstr ""
#: src/qemu_driver.c:4880
#, fuzzy, c-format
msgid "migrate failed: %s"
msgstr "操作失敗:%s"
#: src/qemu_driver.c:4910
#, fuzzy, c-format
msgid "Failed to resume guest %s after failure\n"
msgstr "無法繼續區域 %s"
#: src/qemu_driver.c:5020 src/xen_unified.c:1461
#, c-format
msgid "device %s is not a PCI device"
msgstr ""
#: src/remote_internal.c:291
#, fuzzy
msgid "failed to find libvirtd binary"
msgstr "無法為網路 %s 取消定義"
#: src/remote_internal.c:356
msgid ""
"remote_open: transport in URL not recognised (should be tls|unix|ssh|ext|tcp)"
msgstr ""
#: src/remote_internal.c:516
msgid "remote_open: for 'ext' transport, command is required"
msgstr ""
#: src/remote_internal.c:538 src/xend_internal.c:808
#, fuzzy, c-format
msgid "unable to resolve hostname '%s': %s"
msgstr "無法暫停區域 %s"
#: src/remote_internal.c:589 src/remote_internal.c:665
#, fuzzy, c-format
msgid "unable to connect to '%s'"
msgstr "無法連上 %s"
#: src/remote_internal.c:641
#, fuzzy
msgid "unable to create socket"
msgstr "無法讀取插槽 %d\n"
#: src/remote_internal.c:728
#, fuzzy
msgid "unable to create socket pair"
msgstr "無法讀取插槽 %d\n"
#: src/remote_internal.c:747
msgid "transport methods unix, ssh and ext are not supported under Windows"
msgstr ""
#: src/remote_internal.c:756
#, fuzzy
msgid "unable to make socket non-blocking"
msgstr "無法讀取插槽 %d\n"
#: src/remote_internal.c:762
#, fuzzy
msgid "unable to make pipe"
msgstr "無法關閉插槽 %d\n"
#: src/remote_internal.c:796
#, fuzzy
msgid "unable to auto-detect URI"
msgstr "無法取得區域 UUID"
#: src/remote_internal.c:813
#, fuzzy
msgid "Error allocating callbacks list"
msgstr "分配網路"
#: src/remote_internal.c:818
#, fuzzy
msgid "Error allocating domainEvents"
msgstr "分配區域"
#: src/remote_internal.c:1046
#, fuzzy, c-format
msgid "Cannot access %s '%s'"
msgstr "無法暫停區域 %s"
#: src/remote_internal.c:1068
#, fuzzy, c-format
msgid "unable to allocate TLS credentials: %s"
msgstr "無法分配節點"
#: src/remote_internal.c:1088
#, c-format
msgid "unable to load CA certificate: %s"
msgstr ""
#: src/remote_internal.c:1103
#, c-format
msgid "unable to load private key/certificate: %s"
msgstr ""
#: src/remote_internal.c:1132
#, c-format
msgid "unable to initialize TLS client: %s"
msgstr ""
#: src/remote_internal.c:1141
#, c-format
msgid "unable to set TLS algorithm priority: %s"
msgstr ""
#: src/remote_internal.c:1150
#, c-format
msgid "unable to set certificate priority: %s"
msgstr ""
#: src/remote_internal.c:1160
#, c-format
msgid "unable to set session credentials: %s"
msgstr ""
#: src/remote_internal.c:1175
#, c-format
msgid "unable to complete TLS handshake: %s"
msgstr ""
#: src/remote_internal.c:1197
#, c-format
msgid "unable to complete TLS initialization: %s"
msgstr ""
#: src/remote_internal.c:1203
msgid "server verification (of our certificate or IP address) failed\n"
msgstr ""
#: src/remote_internal.c:1228
#, c-format
msgid "unable to verify server certificate: %s"
msgstr ""
#: src/remote_internal.c:1235
#, fuzzy
msgid "cannot get current time"
msgstr "區域目前的記憶體"
#: src/remote_internal.c:1240
#, fuzzy
msgid "Invalid certificate"
msgstr "記憶體大小 %d 不是有效的數值"
#: src/remote_internal.c:1243
msgid "The certificate is not trusted."
msgstr ""
#: src/remote_internal.c:1246
msgid "The certificate hasn't got a known issuer."
msgstr ""
#: src/remote_internal.c:1249
msgid "The certificate has been revoked."
msgstr ""
#: src/remote_internal.c:1253
msgid "The certificate uses an insecure algorithm"
msgstr ""
#: src/remote_internal.c:1257
#, c-format
msgid "server certificate failed validation: %s"
msgstr ""
#: src/remote_internal.c:1263
msgid "Certificate type is not X.509"
msgstr ""
#: src/remote_internal.c:1268
msgid "gnutls_certificate_get_peers failed"
msgstr ""
#: src/remote_internal.c:1278
#, c-format
msgid "unable to initialize certificate: %s"
msgstr ""
#: src/remote_internal.c:1286
#, fuzzy, c-format
msgid "unable to import certificate: %s"
msgstr "無法寫入設定檔:%s"
#: src/remote_internal.c:1293
msgid "The certificate has expired"
msgstr ""
#: src/remote_internal.c:1299
msgid "The certificate is not yet activated"
msgstr ""
#: src/remote_internal.c:1307
#, c-format
msgid "Certificate's owner does not match the hostname (%s)"
msgstr ""
#: src/remote_internal.c:1608
#, c-format
msgid "too many NUMA cells: %d > %d"
msgstr ""
#: src/remote_internal.c:1671 src/remote_internal.c:1685
#, fuzzy, c-format
msgid "too many remote domain IDs: %d > %d"
msgstr "過多區域"
#: src/remote_internal.c:2189
#, c-format
msgid "map length greater than maximum: %d > %d"
msgstr ""
#: src/remote_internal.c:2228
#, c-format
msgid "vCPU count exceeds maximum: %d > %d"
msgstr ""
#: src/remote_internal.c:2234
#, c-format
msgid "vCPU map buffer length exceeds maximum: %d > %d"
msgstr ""
#: src/remote_internal.c:2251
#, c-format
msgid "host reports too many vCPUs: %d > %d"
msgstr ""
#: src/remote_internal.c:2257
#, c-format
msgid "host reports map buffer length exceeds maximum: %d > %d"
msgstr ""
#: src/remote_internal.c:2330
#, c-format
msgid "security label exceeds maximum: %zd"
msgstr ""
#: src/remote_internal.c:2363
#, c-format
msgid "security model exceeds maximum: %zd"
msgstr ""
#: src/remote_internal.c:2372
#, c-format
msgid "security doi exceeds maximum: %zd"
msgstr ""
#: src/remote_internal.c:2613 src/remote_internal.c:2627
#, fuzzy, c-format
msgid "too many remote domain names: %d > %d"
msgstr "過多區域"
#: src/remote_internal.c:2911
msgid ""
"remoteDomainGetSchedulerParameters: returned number of parameters exceeds "
"limit"
msgstr ""
#: src/remote_internal.c:2938
msgid "remoteDomainGetSchedulerParameters: unknown parameter type"
msgstr ""
#: src/remote_internal.c:2969
#, fuzzy
msgid "out of memory allocating array"
msgstr "改變記憶體分配"
#: src/remote_internal.c:2996
#, fuzzy
msgid "unknown parameter type"
msgstr "未知的作業系統類型"
#: src/remote_internal.c:3107
#, c-format
msgid "block peek request too large for remote protocol, %zi > %d"
msgstr ""
#: src/remote_internal.c:3128 src/remote_internal.c:3179
msgid "returned buffer is not same size as requested"
msgstr ""
#: src/remote_internal.c:3159
#, c-format
msgid "memory peek request too large for remote protocol, %zi > %d"
msgstr ""
#: src/remote_internal.c:3292 src/remote_internal.c:3306
#: src/remote_internal.c:3365 src/remote_internal.c:3379
#, fuzzy, c-format
msgid "too many remote networks: %d > %d"
msgstr "過多連線"
#: src/remote_internal.c:3788 src/remote_internal.c:3857
#, fuzzy
msgid "too many storage pools requested"
msgstr "註冊太多驅動程式"
#: src/remote_internal.c:3800 src/remote_internal.c:3869
#, fuzzy
msgid "too many storage pools received"
msgstr "註冊太多驅動程式"
#: src/remote_internal.c:4363
#, fuzzy
msgid "too many storage volumes requested"
msgstr "註冊太多驅動程式"
#: src/remote_internal.c:4376
#, fuzzy
msgid "too many storage volumes received"
msgstr "註冊太多驅動程式"
#: src/remote_internal.c:4731
#, fuzzy
msgid "too many device names requested"
msgstr "註冊太多驅動程式"
#: src/remote_internal.c:4745
#, fuzzy
msgid "too many device names received"
msgstr "註冊太多驅動程式"
#: src/remote_internal.c:4885
#, fuzzy
msgid "too many capability names requested"
msgstr "註冊太多驅動程式"
#: src/remote_internal.c:4898
msgid "too many capability names received"
msgstr ""
#: src/remote_internal.c:5083
#, fuzzy, c-format
msgid "unknown authentication type %s"
msgstr "操作失敗:%s"
#: src/remote_internal.c:5093
#, c-format
msgid "requested authentication type %s rejected"
msgstr ""
#: src/remote_internal.c:5134
#, fuzzy, c-format
msgid "unsupported authentication type %d"
msgstr "操作失敗"
#: src/remote_internal.c:5379
#, fuzzy, c-format
msgid "failed to initialize SASL library: %d (%s)"
msgstr "無法為 S-Expr 製作序列號:%s"
#: src/remote_internal.c:5388
#, fuzzy
msgid "failed to get sock address"
msgstr "無法將區域 %s 存至 %s"
#: src/remote_internal.c:5398
#, fuzzy
msgid "failed to get peer address"
msgstr "無法取得節點資訊"
#: src/remote_internal.c:5423
#, fuzzy, c-format
msgid "Failed to create SASL client context: %d (%s)"
msgstr "無法建立非運作中的區域 %s\n"
#: src/remote_internal.c:5436
msgid "invalid cipher size for TLS session"
msgstr ""
#: src/remote_internal.c:5446
#, c-format
msgid "cannot set external SSF %d (%s)"
msgstr ""
#: src/remote_internal.c:5465
#, c-format
msgid "cannot set security props %d (%s)"
msgstr ""
#: src/remote_internal.c:5484
#, fuzzy, c-format
msgid "SASL mechanism %s not supported by server"
msgstr "不支援 hypervisor"
#: src/remote_internal.c:5503
#, fuzzy, c-format
msgid "Failed to start SASL negotiation: %d (%s)"
msgstr "無法開啟區域 %s"
#: src/remote_internal.c:5521 src/remote_internal.c:5599
#, fuzzy
msgid "Failed to make auth credentials"
msgstr "無法存入內容"
#: src/remote_internal.c:5545
#, c-format
msgid "SASL negotiation data too long: %d bytes"
msgstr ""
#: src/remote_internal.c:5585
#, fuzzy, c-format
msgid "Failed SASL step: %d (%s)"
msgstr "無法開啟區域 %s"
#: src/remote_internal.c:5669
#, c-format
msgid "negotiation SSF %d was not strong enough"
msgstr ""
#: src/remote_internal.c:5724
#, fuzzy
msgid "Failed to collect auth credentials"
msgstr "無法連上 hypervisor"
#: src/remote_internal.c:5758
msgid "no event support"
msgstr ""
#: src/remote_internal.c:5763
msgid "adding cb to list"
msgstr ""
#: src/remote_internal.c:5792
msgid "removing cb fron list"
msgstr ""
#: src/remote_internal.c:5854
msgid "xdr_remote_message_header failed"
msgstr ""
#: src/remote_internal.c:5860
msgid "marshalling args"
msgstr ""
#: src/remote_internal.c:5877
msgid "xdr_u_int (length word)"
msgstr ""
#: src/remote_internal.c:5923
#, fuzzy
msgid "cannot send data"
msgstr "節點的區域清單"
#: src/remote_internal.c:5954
#, fuzzy, c-format
msgid "failed to read from TLS socket %s"
msgstr "無法讀取插槽 %d\n"
#: src/remote_internal.c:5959 src/remote_internal.c:5977
#, fuzzy
msgid "server closed connection"
msgstr "唯讀的連線"
#: src/remote_internal.c:5973
#, fuzzy
msgid "cannot recv data"
msgstr "節點的區域清單"
#: src/remote_internal.c:6006
#, fuzzy, c-format
msgid "failed to encode SASL data: %s"
msgstr "無法讀取插槽 %d\n"
#: src/remote_internal.c:6104
#, fuzzy, c-format
msgid "failed to decode SASL data: %s"
msgstr "無法取得網路「%s」"
#: src/remote_internal.c:6178
msgid "xdr_u_int (length word, reply)"
msgstr ""
#: src/remote_internal.c:6185
msgid "packet received from server too small"
msgstr ""
#: src/remote_internal.c:6194
msgid "packet received from server too large"
msgstr ""
#: src/remote_internal.c:6218
#, fuzzy
msgid "invalid header in reply"
msgstr "無效的參數,於 %s"
#: src/remote_internal.c:6227
#, c-format
msgid "unknown program (received %x, expected %x)"
msgstr ""
#: src/remote_internal.c:6235
#, c-format
msgid "unknown protocol version (received %x, expected %x)"
msgstr ""
#: src/remote_internal.c:6252
#, c-format
msgid "got unexpected RPC call %d from server"
msgstr ""
#: src/remote_internal.c:6270
#, c-format
msgid "no call waiting for reply with serial %d"
msgstr ""
#: src/remote_internal.c:6280
#, c-format
msgid "unknown procedure (received %x, expected %x)"
msgstr ""
#: src/remote_internal.c:6294
msgid "unmarshalling ret"
msgstr ""
#: src/remote_internal.c:6305
msgid "unmarshalling remote_error"
msgstr ""
#: src/remote_internal.c:6315
#, c-format
msgid "unknown status (received %x)"
msgstr ""
#: src/remote_internal.c:6421
#, fuzzy
msgid "poll on socket failed"
msgstr "操作失敗"
#: src/remote_internal.c:6482
msgid "received hangup / error event on socket"
msgstr ""
#: src/remote_internal.c:6584
#, fuzzy
msgid "failed to wait on condition"
msgstr "無法開啟區域 %s"
#: src/remote_internal.c:6684
msgid "remoteDomainProcessEvent: unmarshalling ret"
msgstr ""
#: src/security.c:46
#, fuzzy, c-format
msgid "invalid security model '%s'"
msgstr "區域目前的記憶體"
#: src/security.c:120
#, c-format
msgid "%s: DOI '%s' is longer than the maximum allowed length of %d"
msgstr ""
#: src/security_selinux.c:113
#, c-format
msgid "%s: cannot open SELinux virtual domain context file %s: %s"
msgstr ""
#: src/security_selinux.c:121
#, c-format
msgid "%s: cannot read SELinux virtual domain context file %s: %s"
msgstr ""
#: src/security_selinux.c:134
#, c-format
msgid "%s: cannot open SELinux virtual image context file %s: %s"
msgstr ""
#: src/security_selinux.c:142
#, c-format
msgid "%s: cannot read SELinux virtual image context file %s: %s"
msgstr ""
#: src/security_selinux.c:170
msgid "security label already defined for VM"
msgstr ""
#: src/security_selinux.c:191 src/security_selinux.c:197
#, fuzzy, c-format
msgid "cannot generate selinux context for %s"
msgstr "無法暫停區域 %s"
#: src/security_selinux.c:244
#, c-format
msgid "%s: error calling getpidcon(): %s"
msgstr ""
#: src/security_selinux.c:252
#, c-format
msgid "%s: security label exceeds maximum lenth: %d"
msgstr ""
#: src/security_selinux.c:264
#, c-format
msgid "%s: error calling security_getenforce(): %s"
msgstr ""
#: src/security_selinux.c:280
#, fuzzy, c-format
msgid "%s: unable to set security context '\\%s' on %s: %s."
msgstr "無法暫停區域 %s"
#: src/security_selinux.c:307
#, fuzzy, c-format
msgid "cannot resolve symlink %s"
msgstr "無法連上 %s"
#: src/security_selinux.c:368
#, fuzzy, c-format
msgid "Invalid security label %s"
msgstr "區域目前的記憶體"
#: src/security_selinux.c:387
#, c-format
msgid ""
"%s: security label driver mismatch: '%s' model configured for domain, but "
"hypervisor driver is '%s'."
msgstr ""
#: src/security_selinux.c:397
#, fuzzy, c-format
msgid "%s: unable to set security context '\\%s': %s."
msgstr "無法暫停區域 %s"
#: src/storage_backend.c:106 src/storage_conf.c:222
#, c-format
msgid "missing backend for pool type %d"
msgstr ""
#: src/storage_backend.c:121 src/storage_backend_fs.c:297
#: src/storage_backend_scsi.c:147
#, fuzzy, c-format
msgid "cannot open volume '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend.c:173
#, fuzzy, c-format
msgid "cannot stat file '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend.c:206
#, fuzzy, c-format
msgid "cannot seek to end of file '%s'"
msgstr "無法寫入設定檔:%s"
#: src/storage_backend.c:227
#, fuzzy, c-format
msgid "cannot get file context of '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend.c:320
#, fuzzy, c-format
msgid "cannot read dir '%s'"
msgstr "無效的參數,於 %s"
#: src/storage_backend.c:410
#, fuzzy, c-format
msgid "Failed to compile regex %s"
msgstr "無法暫停區域 %s"
#: src/storage_backend.c:442 src/storage_backend.c:576
msgid "cannot read fd"
msgstr ""
#: src/storage_backend.c:513 src/storage_backend.c:631
#, fuzzy, c-format
msgid "failed to wait for command '%s'"
msgstr "無法開啟區域 %s"
#: src/storage_backend.c:522 src/storage_backend.c:644
msgid "command did not exit cleanly"
msgstr ""
#: src/storage_backend.c:610
#, fuzzy, c-format
msgid "read error on pipe to '%s'"
msgstr "內部錯誤 %s"
#: src/storage_backend.c:638
#, c-format
msgid "non-zero exit status from command %d"
msgstr ""
#: src/storage_backend.c:665 src/storage_backend.c:677
#, c-format
msgid "%s not implemented on Win32"
msgstr ""
#: src/storage_backend_disk.c:109
msgid "cannot parse device start location"
msgstr ""
#: src/storage_backend_disk.c:116
msgid "cannot parse device end location"
msgstr ""
#: src/storage_backend_disk.c:332
msgid "no large enough free extent"
msgstr ""
#: src/storage_backend_disk.c:372
#, fuzzy, c-format
msgid "Couldn't read volume target path '%s'"
msgstr "無法連上 %s"
#: src/storage_backend_disk.c:383
#, c-format
msgid "Volume path '%s' did not start with parent pool source device name."
msgstr ""
#: src/storage_backend_disk.c:392
#, c-format
msgid "cannot parse partition number from target '%s'"
msgstr ""
#: src/storage_backend_fs.c:311
#, fuzzy, c-format
msgid "cannot read header '%s'"
msgstr "無效的參數,於 %s"
#: src/storage_backend_fs.c:451
#, fuzzy, c-format
msgid "invalid netfs path (no /): %s"
msgstr "無效的網路指標,於 %s"
#: src/storage_backend_fs.c:457
#, fuzzy, c-format
msgid "invalid netfs path (ends in /): %s"
msgstr "無效的網路指標,於 %s"
#: src/storage_backend_fs.c:514
msgid "bad <source> spec"
msgstr ""
#: src/storage_backend_fs.c:527
msgid "missing <host> in <source> spec"
msgstr ""
#: src/storage_backend_fs.c:574
#, fuzzy, c-format
msgid "cannot read mount list '%s'"
msgstr "無法連上 %s"
#: src/storage_backend_fs.c:644 src/storage_backend_fs.c:711
#: src/storage_backend_iscsi.c:276
#, fuzzy
msgid "missing source host"
msgstr "找不到裝置的來源資訊"
#: src/storage_backend_fs.c:649
#, fuzzy
msgid "missing source path"
msgstr "找不到裝置的來源資訊"
#: src/storage_backend_fs.c:655 src/storage_backend_fs.c:722
#: src/storage_backend_iscsi.c:283
#, fuzzy
msgid "missing source device"
msgstr "找不到裝置的來源資訊"
#: src/storage_backend_fs.c:716
#, fuzzy
msgid "missing source dir"
msgstr "找不到裝置的來源資訊"
#: src/storage_backend_fs.c:789 src/storage_backend_fs.c:1029
#: src/storage_backend_fs.c:1087
#, fuzzy, c-format
msgid "cannot create path '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:813
#, fuzzy, c-format
msgid "cannot open path '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:909
#, fuzzy, c-format
msgid "cannot statvfs path '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:975
#, fuzzy, c-format
msgid "cannot unlink path '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:1038
#, fuzzy, c-format
msgid "cannot extend file '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:1064 src/storage_backend_fs.c:1076
#, fuzzy, c-format
msgid "cannot fill file '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:1094 src/storage_backend_fs.c:1148
#: src/storage_backend_fs.c:1187 src/storage_backend_logical.c:611
#, fuzzy, c-format
msgid "cannot read path '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:1116
#, fuzzy, c-format
msgid "unknown storage vol type %d"
msgstr "未知的作業系統類型 %s"
#: src/storage_backend_fs.c:1125
#, fuzzy, c-format
msgid "unknown storage vol backing store type %d"
msgstr "未知的作業系統類型 %s"
#: src/storage_backend_fs.c:1131
#, c-format
msgid "inaccessible backing store volume %s"
msgstr ""
#: src/storage_backend_fs.c:1162
#, c-format
msgid "unsupported storage vol type %d"
msgstr ""
#: src/storage_backend_fs.c:1168
msgid "copy-on-write image not supported with qcow-create"
msgstr ""
#: src/storage_backend_fs.c:1193
msgid "creation of non-raw images is not supported without qemu-img"
msgstr ""
#: src/storage_backend_fs.c:1203 src/storage_backend_logical.c:620
#, fuzzy, c-format
msgid "cannot set file owner '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:1211 src/storage_backend_logical.c:627
#, fuzzy, c-format
msgid "cannot set file mode '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:1227 src/storage_backend_logical.c:634
#, fuzzy, c-format
msgid "cannot close file '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_fs.c:1249
#, fuzzy, c-format
msgid "cannot unlink file '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_iscsi.c:65
#, fuzzy, c-format
msgid "host lookup failed %s"
msgstr "操作失敗:%s"
#: src/storage_backend_iscsi.c:72
#, c-format
msgid "no IP address for target %s"
msgstr ""
#: src/storage_backend_iscsi.c:81
#, c-format
msgid "cannot format ip addr for %s"
msgstr ""
#: src/storage_backend_iscsi.c:149
msgid "cannot find session"
msgstr ""
#: src/storage_backend_iscsi.c:188
#, c-format
msgid "Failed to get host number for iSCSI session with path '%s'"
msgstr ""
#: src/storage_backend_iscsi.c:196
#, fuzzy, c-format
msgid "Failed to find LUs on host %u"
msgstr "無法從 %s 定義區域"
#: src/storage_backend_logical.c:153
msgid "malformed volume extent offset value"
msgstr ""
#: src/storage_backend_logical.c:158
msgid "malformed volume extent length value"
msgstr ""
#: src/storage_backend_logical.c:163
msgid "malformed volume extent size value"
msgstr ""
#: src/storage_backend_logical.c:221
msgid "lvs command failed"
msgstr ""
#: src/storage_backend_logical.c:227
#, c-format
msgid "lvs command failed with exitstatus %d"
msgstr ""
#: src/storage_backend_logical.c:357
#, fuzzy
msgid "failed to get source from sourceList"
msgstr "無法取得節點資訊"
#: src/storage_backend_logical.c:412
#, fuzzy, c-format
msgid "cannot open device '%s'"
msgstr "結點的處理器插槽"
#: src/storage_backend_logical.c:418
#, fuzzy, c-format
msgid "cannot clear device header of '%s'"
msgstr "未知的作業系統類型 %s"
#: src/storage_backend_logical.c:425
#, fuzzy, c-format
msgid "cannot close device '%s'"
msgstr "未知的指令:「%s」"
#: src/storage_backend_logical.c:550
#, fuzzy, c-format
msgid "cannot remove PV device '%s'"
msgstr "未知的主機 %s"
#: src/storage_backend_logical.c:643
#, fuzzy, c-format
msgid "cannot find newly created volume '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_scsi.c:65
#, fuzzy, c-format
msgid "Could not find typefile '%s'"
msgstr "無法連上 %s"
#: src/storage_backend_scsi.c:77
#, fuzzy, c-format
msgid "Could not read typefile '%s'"
msgstr "無法連上 %s"
#: src/storage_backend_scsi.c:89
#, c-format
msgid "Device type '%s' is not an integer"
msgstr ""
#: src/storage_backend_scsi.c:96
#, c-format
msgid "Device type is %d"
msgstr ""
#: src/storage_backend_scsi.c:165
#, fuzzy, c-format
msgid "cannot seek to beginning of file '%s'"
msgstr "無法寫入設定檔:%s"
#: src/storage_backend_scsi.c:172
#, fuzzy, c-format
msgid "cannot read beginning of file '%s'"
msgstr "無法寫入設定檔:%s"
#: src/storage_backend_scsi.c:223
#, fuzzy, c-format
msgid "Trying to create volume for '%s'"
msgstr "無法從 %s 建立區域"
#: src/storage_backend_scsi.c:242
#, c-format
msgid "No stable path found for '%s' in '%s'"
msgstr ""
#: src/storage_backend_scsi.c:255
#, fuzzy, c-format
msgid "Failed to update volume for '%s'"
msgstr "無法從 %s 建立區域"
#: src/storage_backend_scsi.c:306
#, fuzzy, c-format
msgid "Looking for block device in '%s'"
msgstr "未知的主機 %s"
#: src/storage_backend_scsi.c:311 src/storage_backend_scsi.c:387
#, fuzzy, c-format
msgid "Failed to opendir sysfs path '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_scsi.c:324 src/storage_backend_scsi.c:358
#, fuzzy, c-format
msgid "Block device is '%s'"
msgstr "以組絕"
#: src/storage_backend_scsi.c:351
#, fuzzy, c-format
msgid "Failed to parse block name %s"
msgstr "無法將區域 %s 存至 %s"
#: src/storage_backend_scsi.c:431
#, c-format
msgid "Processing LU %u:%u:%u:%u"
msgstr ""
#: src/storage_backend_scsi.c:436
#, c-format
msgid "Failed to determine if %u:%u:%u:%u is a Direct-Access LUN"
msgstr ""
#: src/storage_backend_scsi.c:452
#, c-format
msgid "%u:%u:%u:%u is a Direct-Access LUN"
msgstr ""
#: src/storage_backend_scsi.c:462
#, fuzzy, c-format
msgid "Failed to create new storage volume for %u:%u:%u:%u"
msgstr "無法從 %s 建立網路"
#: src/storage_backend_scsi.c:468
#, c-format
msgid "Created new storage volume for %u:%u:%u:%u successfully"
msgstr ""
#: src/storage_backend_scsi.c:490
#, c-format
msgid "Discovering LUs on host %u"
msgstr ""
#: src/storage_backend_scsi.c:503 src/storage_backend_scsi.c:546
#, fuzzy, c-format
msgid "Failed to opendir path '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_scsi.c:516
#, c-format
msgid "Found LU '%s'"
msgstr ""
#: src/storage_backend_scsi.c:538
#, c-format
msgid "Finding host number from '%s'"
msgstr ""
#: src/storage_backend_scsi.c:555
#, fuzzy, c-format
msgid "Failed to parse target '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_scsi.c:576
#, c-format
msgid "Triggering rescan of host %d"
msgstr ""
#: src/storage_backend_scsi.c:584
#, fuzzy, c-format
msgid "Scan trigger path is '%s'"
msgstr "無法暫停區域 %s"
#: src/storage_backend_scsi.c:590
#, c-format
msgid "Could not open '%s' to trigger host scan"
msgstr ""
#: src/storage_backend_scsi.c:601
#, c-format
msgid "Write to '%s' to trigger host scan failed"
msgstr ""
#: src/storage_backend_scsi.c:610
#, c-format
msgid "Rescan of host %d complete"
msgstr ""
#: src/storage_backend_scsi.c:625
#, fuzzy, c-format
msgid "Failed to get host number from '%s'"
msgstr "無法從 %s 建立網路"
#: src/storage_backend_scsi.c:631
#, fuzzy, c-format
msgid "Scanning host%u"
msgstr "未知的主機 %s"
#: src/storage_conf.c:367
msgid "missing auth host attribute"
msgstr ""
#: src/storage_conf.c:374
msgid "missing auth passwd attribute"
msgstr ""
#: src/storage_conf.c:416
msgid "malformed octal mode"
msgstr ""
#: src/storage_conf.c:427
msgid "malformed owner element"
msgstr ""
#: src/storage_conf.c:438
msgid "malformed group element"
msgstr ""
#: src/storage_conf.c:471
msgid "unknown root element for storage pool"
msgstr ""
#: src/storage_conf.c:478
#, fuzzy, c-format
msgid "unknown storage pool type %s"
msgstr "未知的作業系統類型 %s"
#: src/storage_conf.c:495
msgid "missing pool source name element"
msgstr ""
#: src/storage_conf.c:503
#, fuzzy
msgid "unable to generate uuid"
msgstr "網路名稱或 uuid"
#: src/storage_conf.c:524
#, fuzzy, c-format
msgid "unknown pool format type %s"
msgstr "未知的作業系統類型 %s"
#: src/storage_conf.c:534
msgid "missing storage pool source host name"
msgstr ""
#: src/storage_conf.c:544
msgid "cannot extract storage pool source devices"
msgstr ""
#: src/storage_conf.c:557
#, fuzzy
msgid "missing storage pool source device path"
msgstr "找不到裝置 %s 的來源資訊"
#: src/storage_conf.c:568
msgid "missing storage pool source path"
msgstr ""
#: src/storage_conf.c:590
#, fuzzy
msgid "missing storage pool source adapter name"
msgstr "找不到裝置 %s 的來源資訊"
#: src/storage_conf.c:603
#, fuzzy, c-format
msgid "unknown auth type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/storage_conf.c:618
msgid "missing storage pool target path"
msgstr ""
#: src/storage_conf.c:758
#, c-format
msgid "unknown pool format number %d"
msgstr ""
#: src/storage_conf.c:791 src/storage_conf.c:1553
#, fuzzy
msgid "unexpected pool type"
msgstr "無預期的 mime 類型"
#: src/storage_conf.c:895
#, fuzzy, c-format
msgid "unknown size units '%s'"
msgstr "未知的主機 %s"
#: src/storage_conf.c:902
msgid "malformed capacity element"
msgstr ""
#: src/storage_conf.c:907
msgid "capacity element value too large"
msgstr ""
#: src/storage_conf.c:938
#, fuzzy
msgid "unknown root element"
msgstr "未知的主機 %s"
#: src/storage_conf.c:945
#, fuzzy
msgid "missing volume name element"
msgstr "找不到區域名稱的資訊"
#: src/storage_conf.c:956
msgid "missing capacity element"
msgstr ""
#: src/storage_conf.c:985 src/storage_conf.c:1008
#, fuzzy, c-format
msgid "unknown volume format type %s"
msgstr "未知的作業系統類型 %s"
#: src/storage_conf.c:1104
#, c-format
msgid "unknown volume format number %d"
msgstr ""
#: src/storage_conf.c:1447
#, fuzzy, c-format
msgid "cannot create config directory %s"
msgstr "無法寫入設定檔:%s"
#: src/storage_conf.c:1455
msgid "cannot construct config file path"
msgstr ""
#: src/storage_conf.c:1466
msgid "cannot construct autostart link path"
msgstr ""
#: src/storage_conf.c:1480
#, fuzzy
msgid "failed to generate XML"
msgstr "無法讀取插槽 %d\n"
#: src/storage_conf.c:1488
#, fuzzy, c-format
msgid "cannot create config file %s"
msgstr "無法寫入設定檔:%s"
#: src/storage_conf.c:1496
#, fuzzy, c-format
msgid "cannot write config file %s"
msgstr "無法寫入設定檔:%s"
#: src/storage_conf.c:1503
#, fuzzy, c-format
msgid "cannot save config file %s"
msgstr "無法寫入設定檔:%s"
#: src/storage_conf.c:1524
#, fuzzy, c-format
msgid "no config file for %s"
msgstr "設定檔語法錯誤:%s"
#: src/storage_conf.c:1530
#, c-format
msgid "cannot remove config for %s"
msgstr ""
#: src/storage_driver.c:273 src/storage_driver.c:916 src/storage_driver.c:946
msgid "no pool with matching uuid"
msgstr ""
#: src/storage_driver.c:298
msgid "no pool with matching name"
msgstr ""
#: src/storage_driver.c:478 src/test.c:2525
msgid "storage pool already exists"
msgstr ""
#: src/storage_driver.c:557 src/storage_driver.c:611 src/storage_driver.c:656
#: src/storage_driver.c:693 src/storage_driver.c:749 src/storage_driver.c:799
#: src/storage_driver.c:855 src/storage_driver.c:891 src/storage_driver.c:1007
#: src/storage_driver.c:1040 src/storage_driver.c:1085
#: src/storage_driver.c:1210 src/storage_driver.c:1328
#: src/storage_driver.c:1406 src/storage_driver.c:1458
#: src/storage_driver.c:1504
msgid "no storage pool with matching uuid"
msgstr ""
#: src/storage_driver.c:563
msgid "pool is still active"
msgstr ""
#: src/storage_driver.c:569 src/storage_driver.c:708 src/storage_driver.c:764
#: src/storage_driver.c:814
#, c-format
msgid "pool '%s' has asynchronous jobs running."
msgstr ""
#: src/storage_driver.c:620
#, fuzzy
msgid "pool already active"
msgstr "區域已經啟動"
#: src/storage_driver.c:665
#, fuzzy
msgid "storage pool is already active"
msgstr "區域已經啟動"
#: src/storage_driver.c:702 src/storage_driver.c:808 src/storage_driver.c:1013
#: src/storage_driver.c:1046 src/storage_driver.c:1091
#: src/storage_driver.c:1216 src/storage_driver.c:1334
#: src/storage_driver.c:1412 src/storage_driver.c:1464
#: src/storage_driver.c:1510
msgid "storage pool is not active"
msgstr ""
#: src/storage_driver.c:758
msgid "storage pool is still active"
msgstr ""
#: src/storage_driver.c:771
msgid "pool does not support volume delete"
msgstr ""
#: src/storage_driver.c:952 src/test.c:2856
msgid "pool has no config file"
msgstr ""
#: src/storage_driver.c:1099 src/storage_driver.c:1345
#: src/storage_driver.c:1420 src/storage_driver.c:1472
#: src/storage_driver.c:1518
msgid "no storage vol with matching name"
msgstr ""
#: src/storage_driver.c:1138
msgid "no storage vol with matching key"
msgstr ""
#: src/storage_driver.c:1185
msgid "no storage vol with matching path"
msgstr ""
#: src/storage_driver.c:1229 src/test.c:3093
msgid "storage vol already exists"
msgstr ""
#: src/storage_driver.c:1241
msgid "storage pool does not support volume creation"
msgstr ""
#: src/storage_driver.c:1351
#, fuzzy, c-format
msgid "volume '%s' is still being allocated."
msgstr "區域還在執行中"
#: src/storage_driver.c:1358
msgid "storage pool does not support vol deletion"
msgstr ""
#: src/test.c:245 src/test.c:1158
msgid "getting time of day"
msgstr "讀取當天的時間"
#: src/test.c:376
#, fuzzy, c-format
msgid "loading host definition file '%s'"
msgstr "載入主機定義檔"
#: src/test.c:384
msgid "host"
msgstr "主機"
#: src/test.c:392
msgid "node"
msgstr "節點"
#: src/test.c:399
msgid "creating xpath context"
msgstr "建立 xpath 的內文"
#: src/test.c:414
msgid "node cpu numa nodes"
msgstr "節點的處理器 numa 節點"
#: src/test.c:422
msgid "node cpu sockets"
msgstr "結點的處理器插槽"
#: src/test.c:430
msgid "node cpu cores"
msgstr "節點的處理器核心"
#: src/test.c:438
msgid "node cpu threads"
msgstr "節點的處理器執行續"
#: src/test.c:449
msgid "node active cpu"
msgstr "節點啟用中的處理器"
#: src/test.c:456
msgid "node cpu mhz"
msgstr "節點的處理器速度MHz"
#: src/test.c:471
msgid "node memory"
msgstr "節點的記憶體"
#: src/test.c:477
msgid "node domain list"
msgstr "節點的區域清單"
#: src/test.c:488
msgid "resolving domain filename"
msgstr "解析區域的檔名"
#: src/test.c:516
#, fuzzy
msgid "node network list"
msgstr "節點的區域清單"
#: src/test.c:526
#, fuzzy
msgid "resolving network filename"
msgstr "解析區域的檔名"
#: src/test.c:551
#, fuzzy
msgid "node pool list"
msgstr "節點的區域清單"
#: src/test.c:563
#, fuzzy
msgid "resolving pool filename"
msgstr "解析區域的檔名"
#: src/test.c:650
msgid "testOpen: supply a path or use test:///default"
msgstr ""
#: src/test.c:716 src/uml_driver.c:1167 src/xen_unified.c:468
msgid "cannot lookup hostname"
msgstr ""
#: src/test.c:960
#, fuzzy, c-format
msgid "domain '%s' not paused"
msgstr "區域 %s 已經存在"
#: src/test.c:1002 src/test.c:1043
#, fuzzy, c-format
msgid "domain '%s' not running"
msgstr "區域還在執行中"
#: src/test.c:1203
#, fuzzy, c-format
msgid "saving domain '%s' failed to allocate space for metadata"
msgstr "無法分配節點"
#: src/test.c:1210
#, fuzzy, c-format
msgid "saving domain '%s' to '%s': open failed"
msgstr "將區域狀態存至檔案"
#: src/test.c:1217 src/test.c:1223 src/test.c:1229 src/test.c:1236
#, fuzzy, c-format
msgid "saving domain '%s' to '%s': write failed"
msgstr "將區域狀態存至檔案"
#: src/test.c:1287
#, fuzzy, c-format
msgid "cannot read domain image '%s'"
msgstr "節點的區域清單"
#: src/test.c:1293
#, c-format
msgid "incomplete save header in '%s'"
msgstr ""
#: src/test.c:1299
msgid "mismatched header magic"
msgstr ""
#: src/test.c:1304
#, fuzzy, c-format
msgid "failed to read metadata length in '%s'"
msgstr "無法從 Xen 系統程式讀取"
#: src/test.c:1310
msgid "length of metadata out of range"
msgstr ""
#: src/test.c:1319
#, fuzzy, c-format
msgid "incomplete metdata in '%s'"
msgstr "無預期的資料「%s」"
#: src/test.c:1376
#, fuzzy, c-format
msgid "domain '%s' coredump: failed to open %s"
msgstr "區域 %s 已傾印至 %s\n"
#: src/test.c:1382
#, fuzzy, c-format
msgid "domain '%s' coredump: failed to write header to %s"
msgstr "無法寫入設定檔"
#: src/test.c:1388
#, fuzzy, c-format
msgid "domain '%s' coredump: write failed: %s"
msgstr "區域 %s 已傾印至 %s\n"
#: src/test.c:1657
msgid "Range exceeds available cells"
msgstr ""
#: src/test.c:1691
#, fuzzy, c-format
msgid "Domain '%s' is already running"
msgstr "區域已經啟動"
#: src/test.c:1728
#, fuzzy, c-format
msgid "Domain '%s' is still running"
msgstr "區域還在執行中"
#: src/test.c:2109
#, fuzzy, c-format
msgid "Network '%s' is still running"
msgstr "區域還在執行中"
#: src/test.c:2142
#, fuzzy, c-format
msgid "Network '%s' is already running"
msgstr "區域已經啟動"
#: src/test.c:2484 src/test.c:2604 src/test.c:2637 src/test.c:2705
#, fuzzy, c-format
msgid "storage pool '%s' is already active"
msgstr "區域已經啟動"
#: src/test.c:2666 src/test.c:2737 src/test.c:2889 src/test.c:2924
#: src/test.c:2970 src/test.c:3082 src/test.c:3178 src/test.c:3256
#: src/test.c:3301 src/test.c:3341
#, c-format
msgid "storage pool '%s' is not active"
msgstr ""
#: src/test.c:2978 src/test.c:3171 src/test.c:3249 src/test.c:3294
#: src/test.c:3334
#, c-format
msgid "no storage vol with matching name '%s'"
msgstr ""
#: src/test.c:3021
#, c-format
msgid "no storage vol with matching key '%s'"
msgstr ""
#: src/test.c:3055
#, c-format
msgid "no storage vol with matching path '%s'"
msgstr ""
#: src/test.c:3101
#, c-format
msgid "Not enough free space in pool for volume '%s'"
msgstr ""
#: src/uml_conf.c:134
msgid "only TCP listen is supported for chr device"
msgstr ""
#: src/uml_conf.c:154
#, c-format
msgid "unsupported chr device type %d"
msgstr ""
#: src/uml_driver.c:104
msgid "Failed to set close-on-exec file descriptor flag\n"
msgstr ""
#: src/uml_driver.c:375
msgid "cannot initialize inotify"
msgstr ""
#: src/uml_driver.c:381
#, fuzzy, c-format
msgid "Failed to create monitor directory %s: %s"
msgstr "無法從 %s 建立網路"
#: src/uml_driver.c:414
#, fuzzy
msgid "umlStartup: out of memory\n"
msgstr "記憶體不足"
#: src/uml_driver.c:562
#, fuzzy, c-format
msgid "failed to read pid: %s"
msgstr "無法暫停區域 %s"
#: src/uml_driver.c:610
#, fuzzy
msgid "cannot open socket"
msgstr "結點的處理器插槽"
#: src/uml_driver.c:618
#, fuzzy
msgid "cannot bind socket"
msgstr "結點的處理器插槽"
#: src/uml_driver.c:671
#, fuzzy, c-format
msgid "cannot send too long command %s (%d bytes)"
msgstr "未知的指令:「%s」"
#: src/uml_driver.c:681
#, fuzzy, c-format
msgid "cannot send command %s"
msgstr "未知的指令:「%s」"
#: src/uml_driver.c:691
#, fuzzy, c-format
msgid "cannot read reply %s"
msgstr "無法連上 %s"
#: src/uml_driver.c:744
msgid "no kernel specified"
msgstr ""
#: src/uml_driver.c:753
#, c-format
msgid "Cannot find UML kernel %s"
msgstr ""
#: src/uml_driver.c:831
#, fuzzy, c-format
msgid "failed to wait on process: %d: %s\n"
msgstr "無法寫入插槽 %d\n"
#: src/uml_driver.c:873
#, c-format
msgid "Got unexpected pid %d != %d\n"
msgstr ""
#: src/uml_driver.c:1147
#, fuzzy, c-format
msgid "cannot parse version %s"
msgstr "無法連上 %s"
#: src/uml_driver.c:1464
#, fuzzy
msgid "cannot read cputime for domain"
msgstr "非作用中區域的名稱"
#: src/uml_driver.c:1805
#, fuzzy, c-format
msgid "cannot read %s"
msgstr "無法連上 %s"
#: src/util.c:296
msgid "cannot block signals"
msgstr ""
#: src/util.c:311
#, fuzzy
msgid "cannot create pipe"
msgstr "無法讀取插槽 %d\n"
#: src/util.c:342
#, fuzzy
msgid "Failed to create pipe"
msgstr "無法讀取插槽 %d\n"
#: src/util.c:371 src/util.c:457
msgid "cannot fork child process"
msgstr ""
#: src/util.c:390 src/util.c:427
#, fuzzy
msgid "cannot unblock signals"
msgstr "結點的處理器插槽"
#: src/util.c:444
msgid "cannot become session leader"
msgstr ""
#: src/util.c:450
#, c-format
msgid "cannot change to root directory: %s"
msgstr ""
#: src/util.c:468
#, fuzzy
msgid "failed to setup stdin file handle"
msgstr "無法解析設定檔 %s"
#: src/util.c:474
#, fuzzy
msgid "failed to setup stdout file handle"
msgstr "無法解析設定檔 %s"
#: src/util.c:480
#, fuzzy
msgid "failed to setup stderr file handle"
msgstr "無法為區域 %s 取消定義"
#: src/util.c:502
#, fuzzy, c-format
msgid "cannot execute binary %s"
msgstr "無法連上 %s"
#: src/util.c:604
msgid "Unknown poll response."
msgstr ""
#: src/util.c:635
#, fuzzy
msgid "poll error"
msgstr "錯誤:"
#: src/util.c:711
#, c-format
msgid "'%s' exited with non-zero status %d and signal %d: %s"
msgstr ""
#: src/util.c:1686
#, fuzzy, c-format
msgid "Failed to find user record for uid '%d'"
msgstr "無法為網路 %s 取消定義"
#: src/uuid.c:104
#, c-format
msgid "Falling back to pseudorandom UUID, failed to generate random bytes: %s"
msgstr ""
#: src/virsh.c:337
#, fuzzy
msgid "unknown error"
msgstr "未知的主機"
#: src/virsh.c:358
msgid "print help"
msgstr "列印求助訊息"
#: src/virsh.c:359
msgid "Prints global help or command specific help."
msgstr "列印一般求助訊息,或特定指令的求助訊息。"
#: src/virsh.c:365
#, fuzzy
msgid "name of command"
msgstr "非作用中區域的名稱"
#: src/virsh.c:377
msgid ""
"Commands:\n"
"\n"
msgstr ""
"指令:\n"
"\n"
#: src/virsh.c:390
msgid "autostart a domain"
msgstr "自動啟動一個區域"
#: src/virsh.c:392
msgid "Configure a domain to be automatically started at boot."
msgstr "將區域設定為開機時自動啟動。"
#: src/virsh.c:397 src/virsh.c:496 src/virsh.c:720 src/virsh.c:756
#: src/virsh.c:812 src/virsh.c:878 src/virsh.c:1116 src/virsh.c:1159
#: src/virsh.c:1378 src/virsh.c:1422 src/virsh.c:1460 src/virsh.c:1498
#: src/virsh.c:1536 src/virsh.c:1574 src/virsh.c:1723 src/virsh.c:1809
#: src/virsh.c:1942 src/virsh.c:1998 src/virsh.c:2054 src/virsh.c:2173
#: src/virsh.c:2323 src/virsh.c:4818 src/virsh.c:4893 src/virsh.c:4954
#: src/virsh.c:5012 src/virsh.c:5070 src/virsh.c:5186 src/virsh.c:5306
#: src/virsh.c:5470 src/virsh.c:5700
msgid "domain name, id or uuid"
msgstr "區域名稱、id 或 uuid"
#: src/virsh.c:398 src/virsh.c:2389 src/virsh.c:2878
msgid "disable autostarting"
msgstr "停用自動啟動"
#: src/virsh.c:419
#, fuzzy, c-format
msgid "Failed to mark domain %s as autostarted"
msgstr "無法將區域 %s 標示為 %s 自動啟動"
#: src/virsh.c:422
#, fuzzy, c-format
msgid "Failed to unmark domain %s as autostarted"
msgstr "無法將區域 %s 標示為 %s 自動啟動"
#: src/virsh.c:429
#, fuzzy, c-format
msgid "Domain %s marked as autostarted\n"
msgstr "區域 %s %s已標記為自動啟動\n"
#: src/virsh.c:431
#, fuzzy, c-format
msgid "Domain %s unmarked as autostarted\n"
msgstr "區域 %s %s已標記為自動啟動\n"
#: src/virsh.c:441
msgid "(re)connect to hypervisor"
msgstr "(重新)連至 hypervisor"
#: src/virsh.c:443
msgid ""
"Connect to local hypervisor. This is built-in command after shell start up."
msgstr "連上本機的 hypervisor。這是 shell 啟動後的內建指令。"
#: src/virsh.c:448
msgid "hypervisor connection URI"
msgstr "hypervisor 連線的 URI"
#: src/virsh.c:449
msgid "read-only connection"
msgstr "唯讀的連線"
#: src/virsh.c:461
msgid "Failed to disconnect from the hypervisor"
msgstr "無法從 hypervisor 處斷線"
#: src/virsh.c:480
msgid "Failed to connect to the hypervisor"
msgstr "無法連上 hypervisor"
#: src/virsh.c:489
msgid "connect to the guest console"
msgstr "連接客座端主控台"
#: src/virsh.c:491
msgid "Connect the virtual serial console for the guest"
msgstr "透過虛擬序列埠主控台,連接用戶端"
#: src/virsh.c:514
#, fuzzy
msgid "Failed to get local hostname"
msgstr "無法取得 hypervisor 類型"
#: src/virsh.c:519
#, fuzzy
msgid "Failed to get connection hostname"
msgstr "無法開啟網路 %s"
#: src/virsh.c:524
#, fuzzy
msgid "Cannot connect to a remote console device"
msgstr "連接客座端主控台"
#: src/virsh.c:545
#, fuzzy, c-format
msgid "Connected to domain %s\n"
msgstr "無預期的 mime 類型"
#: src/virsh.c:546
msgid "Escape character is ^]\n"
msgstr ""
#: src/virsh.c:550
msgid "No console available for domain\n"
msgstr "區域中沒有可用的主控台\n"
#: src/virsh.c:569
msgid "console not implemented on this platform"
msgstr ""
#: src/virsh.c:597
msgid "list domains"
msgstr "列出區域"
#: src/virsh.c:598
msgid "Returns list of domains."
msgstr "傳回區域清單。"
#: src/virsh.c:603
msgid "list inactive domains"
msgstr "列出非作用中的區域"
#: src/virsh.c:604
msgid "list inactive & active domains"
msgstr "列出作用中與非作用中的區域"
#: src/virsh.c:626 src/virsh.c:633
msgid "Failed to list active domains"
msgstr "無法列出運作中的區域"
#: src/virsh.c:644 src/virsh.c:652
msgid "Failed to list inactive domains"
msgstr "無法列出非作用中的區域"
#: src/virsh.c:661
msgid "Id"
msgstr "Id"
#: src/virsh.c:661 src/virsh.c:2667 src/virsh.c:3427 src/virsh.c:4212
msgid "Name"
msgstr "名稱"
#: src/virsh.c:661 src/virsh.c:2667 src/virsh.c:3427
msgid "State"
msgstr "狀態"
#: src/virsh.c:674 src/virsh.c:696 src/virsh.c:6713 src/virsh.c:6729
msgid "no state"
msgstr "無狀態"
#: src/virsh.c:714
msgid "domain state"
msgstr "區域狀態"
#: src/virsh.c:715
#, fuzzy
msgid "Returns state about a domain."
msgstr "傳回執行中區域的狀態"
#: src/virsh.c:750
msgid "get device block stats for a domain"
msgstr ""
#: src/virsh.c:751
#, fuzzy
msgid "Get device block stats for a running domain."
msgstr "傳回執行中區域的狀態"
#: src/virsh.c:757
#, fuzzy
msgid "block device"
msgstr "以組絕"
#: src/virsh.c:778
#, fuzzy, c-format
msgid "Failed to get block stats %s %s"
msgstr "無法將區域 %s 存至 %s"
#: src/virsh.c:806
#, fuzzy
msgid "get network interface stats for a domain"
msgstr "網路名稱"
#: src/virsh.c:807
#, fuzzy
msgid "Get network interface stats for a running domain."
msgstr "傳回執行中區域的狀態"
#: src/virsh.c:813
msgid "interface device"
msgstr ""
#: src/virsh.c:834
#, fuzzy, c-format
msgid "Failed to get interface stats %s %s"
msgstr "無法取得節點資訊"
#: src/virsh.c:872
msgid "suspend a domain"
msgstr "暫停區域"
#: src/virsh.c:873
msgid "Suspend a running domain."
msgstr "暫停執行中的區域。"
#: src/virsh.c:896
#, c-format
msgid "Domain %s suspended\n"
msgstr "區域 %s 已經暫停\n"
#: src/virsh.c:898
#, c-format
msgid "Failed to suspend domain %s"
msgstr "無法暫停區域 %s"
#: src/virsh.c:910
msgid "create a domain from an XML file"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:911
msgid "Create a domain."
msgstr "建立區域。"
#: src/virsh.c:916 src/virsh.c:967
#, fuzzy
msgid "file containing an XML domain description"
msgstr "包含 XML 區域描述的檔案"
#: src/virsh.c:917 src/virsh.c:1069
msgid "attach to console after creation"
msgstr ""
#: src/virsh.c:945
#, c-format
msgid "Domain %s created from %s\n"
msgstr "區域 %s 建立自 %s\n"
#: src/virsh.c:951
#, c-format
msgid "Failed to create domain from %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:961
msgid "define (but don't start) a domain from an XML file"
msgstr "從 XML 檔案定義(但不啟動)區域"
#: src/virsh.c:962
msgid "Define a domain."
msgstr "定義區域。"
#: src/virsh.c:994
#, c-format
msgid "Domain %s defined from %s\n"
msgstr "區域 %s 定義自 %s\n"
#: src/virsh.c:998
#, c-format
msgid "Failed to define domain from %s"
msgstr "無法從 %s 定義區域"
#: src/virsh.c:1008
msgid "undefine an inactive domain"
msgstr "取消定義非作用中的區域"
#: src/virsh.c:1009
msgid "Undefine the configuration for an inactive domain."
msgstr "為非作用中的區域取消定義。"
#: src/virsh.c:1014 src/virsh.c:2252
msgid "domain name or uuid"
msgstr "區域名稱或 uuid"
#: src/virsh.c:1036
#, c-format
msgid ""
"a running domain like %s cannot be undefined;\n"
"to undefine, first shutdown then undefine using its name or UUID"
msgstr ""
#: src/virsh.c:1047
#, c-format
msgid "Domain %s has been undefined\n"
msgstr "區域 %s 已經取消定義\n"
#: src/virsh.c:1049
#, c-format
msgid "Failed to undefine domain %s"
msgstr "無法為區域 %s 取消定義"
#: src/virsh.c:1062
msgid "start a (previously defined) inactive domain"
msgstr "開啟(先前定義的)非作用中區域"
#: src/virsh.c:1063
msgid "Start a domain."
msgstr "開啟一個區域。"
#: src/virsh.c:1068
msgid "name of the inactive domain"
msgstr "非作用中區域的名稱"
#: src/virsh.c:1087
msgid "Domain is already active"
msgstr "區域已經啟動"
#: src/virsh.c:1093
#, c-format
msgid "Domain %s started\n"
msgstr "區域 %s 已開啟\n"
#: src/virsh.c:1098
#, c-format
msgid "Failed to start domain %s"
msgstr "無法開啟區域 %s"
#: src/virsh.c:1110
msgid "save a domain state to a file"
msgstr "將區域狀態存至檔案"
#: src/virsh.c:1111
msgid "Save a running domain."
msgstr "儲存執行中的區域。"
#: src/virsh.c:1117
msgid "where to save the data"
msgstr "將資料存至何處"
#: src/virsh.c:1139
#, c-format
msgid "Domain %s saved to %s\n"
msgstr "區域 %s 已存至 %s\n"
#: src/virsh.c:1141
#, c-format
msgid "Failed to save domain %s to %s"
msgstr "無法將區域 %s 存至 %s"
#: src/virsh.c:1153
msgid "show/set scheduler parameters"
msgstr ""
#: src/virsh.c:1154
msgid "Show/Set scheduler parameters."
msgstr ""
#: src/virsh.c:1160
msgid "parameter=value"
msgstr ""
#: src/virsh.c:1161
msgid "weight for XEN_CREDIT"
msgstr ""
#: src/virsh.c:1162
msgid "cap for XEN_CREDIT"
msgstr ""
#: src/virsh.c:1198
#, fuzzy
msgid "Invalid value of weight"
msgstr "記憶體大小 %d 不是有效的數值"
#: src/virsh.c:1208
#, fuzzy
msgid "Invalid value of cap"
msgstr "記憶體大小 %d 不是有效的數值"
#: src/virsh.c:1218
msgid "Error getting param"
msgstr ""
#: src/virsh.c:1227
#, fuzzy
msgid "Invalid value of param"
msgstr "記憶體大小 %d 不是有效的數值"
#: src/virsh.c:1276 src/virsh.c:1280
msgid "Scheduler"
msgstr ""
#: src/virsh.c:1280
#, fuzzy
msgid "Unknown"
msgstr "未知的主機"
#: src/virsh.c:1335
msgid "restore a domain from a saved state in a file"
msgstr "從檔案中的儲存狀態回復區域"
#: src/virsh.c:1336
msgid "Restore a domain."
msgstr "回復區域。"
#: src/virsh.c:1341
msgid "the state to restore"
msgstr "要回復的狀態"
#: src/virsh.c:1360
#, c-format
msgid "Domain restored from %s\n"
msgstr "從 %s 回復區域\n"
#: src/virsh.c:1362
#, c-format
msgid "Failed to restore domain from %s"
msgstr "無法從 %s 回復區域"
#: src/virsh.c:1372
msgid "dump the core of a domain to a file for analysis"
msgstr "將一個區域的核心傾印到檔案中,以供分析用"
#: src/virsh.c:1373
msgid "Core dump a domain."
msgstr "傾印一個區域的核心。"
#: src/virsh.c:1379
msgid "where to dump the core"
msgstr "將核心傾印至何處"
#: src/virsh.c:1401
#, fuzzy, c-format
msgid "Domain %s dumped to %s\n"
msgstr "區域 %s 已傾印至 %s\n"
#: src/virsh.c:1403
#, c-format
msgid "Failed to core dump domain %s to %s"
msgstr "無法將區域 %s 的核心傾印至 %s"
#: src/virsh.c:1416
msgid "resume a domain"
msgstr "繼續執行區域"
#: src/virsh.c:1417
msgid "Resume a previously suspended domain."
msgstr "繼續一項先前暫停的區域。"
#: src/virsh.c:1440
#, c-format
msgid "Domain %s resumed\n"
msgstr "區域 %s 已經繼續執行\n"
#: src/virsh.c:1442
#, c-format
msgid "Failed to resume domain %s"
msgstr "無法繼續區域 %s"
#: src/virsh.c:1454
msgid "gracefully shutdown a domain"
msgstr "以正確方法讓區域停機"
#: src/virsh.c:1455
msgid "Run shutdown in the target domain."
msgstr "在目標區域執行關機。"
#: src/virsh.c:1478
#, c-format
msgid "Domain %s is being shutdown\n"
msgstr "區域 %s 正在執行關機\n"
#: src/virsh.c:1480
#, c-format
msgid "Failed to shutdown domain %s"
msgstr "無法關上區域 %s"
#: src/virsh.c:1492
msgid "reboot a domain"
msgstr "重新啟動區域"
#: src/virsh.c:1493
msgid "Run a reboot command in the target domain."
msgstr "在目標區域中執行重新開機指令。"
#: src/virsh.c:1516
#, c-format
msgid "Domain %s is being rebooted\n"
msgstr "區域 %s 正在重新開機中\n"
#: src/virsh.c:1518
#, c-format
msgid "Failed to reboot domain %s"
msgstr "無法重新啟動區域 %s"
#: src/virsh.c:1530
msgid "destroy a domain"
msgstr "刪除一個區域"
#: src/virsh.c:1531
msgid "Destroy a given domain."
msgstr "刪除給定的區域。"
#: src/virsh.c:1554
#, c-format
msgid "Domain %s destroyed\n"
msgstr "區域 %s 已經刪除\n"
#: src/virsh.c:1556
#, c-format
msgid "Failed to destroy domain %s"
msgstr "無法刪除區域 %s"
#: src/virsh.c:1568
msgid "domain information"
msgstr "區域資訊"
#: src/virsh.c:1569
msgid "Returns basic information about the domain."
msgstr "傳回區域的相關資訊。"
#: src/virsh.c:1597 src/virsh.c:1599
msgid "Id:"
msgstr "Id:"
#: src/virsh.c:1600 src/virsh.c:3662 src/virsh.c:4102
msgid "Name:"
msgstr "名稱:"
#: src/virsh.c:1603 src/virsh.c:3665
msgid "UUID:"
msgstr "UUID"
#: src/virsh.c:1606
msgid "OS Type:"
msgstr "作業系統類型:"
#: src/virsh.c:1611 src/virsh.c:1767 src/virsh.c:3672 src/virsh.c:3676
#: src/virsh.c:3680 src/virsh.c:3684
msgid "State:"
msgstr "狀態:"
#: src/virsh.c:1614 src/virsh.c:2125
msgid "CPU(s):"
msgstr "處理器數目:"
#: src/virsh.c:1621 src/virsh.c:1774
msgid "CPU time:"
msgstr "處理器時間:"
#: src/virsh.c:1625 src/virsh.c:1628
msgid "Max memory:"
msgstr "最大記憶體:"
#: src/virsh.c:1629
msgid "no limit"
msgstr "沒有限制"
#: src/virsh.c:1631
msgid "Used memory:"
msgstr "已使用的記憶體:"
#: src/virsh.c:1639
#, fuzzy
msgid "Autostart:"
msgstr "自動啟動"
#: src/virsh.c:1640
msgid "enable"
msgstr ""
#: src/virsh.c:1640
msgid "disable"
msgstr ""
#: src/virsh.c:1651
msgid "Security model:"
msgstr ""
#: src/virsh.c:1652
msgid "Security DOI:"
msgstr ""
#: src/virsh.c:1661
msgid "Security label:"
msgstr ""
#: src/virsh.c:1674
#, fuzzy
msgid "NUMA free memory"
msgstr "已使用的記憶體:"
#: src/virsh.c:1675
msgid "display available free memory for the NUMA cell."
msgstr ""
#: src/virsh.c:1680
#, fuzzy
msgid "NUMA cell number"
msgstr "NUMA cell"
#: src/virsh.c:1706
msgid "Total"
msgstr ""
#: src/virsh.c:1717
msgid "domain vcpu information"
msgstr "區域 vcpu 的資訊"
#: src/virsh.c:1718
msgid "Returns basic information about the domain virtual CPUs."
msgstr "傳回區域的虛擬處理器之基本資訊。"
#: src/virsh.c:1765
msgid "VCPU:"
msgstr "VCPU"
#: src/virsh.c:1766
msgid "CPU:"
msgstr "處理器:"
#: src/virsh.c:1776
msgid "CPU Affinity:"
msgstr "處理器的同屬:"
#: src/virsh.c:1788
msgid "Domain shut off, virtual CPUs not present."
msgstr ""
#: src/virsh.c:1803
msgid "control domain vcpu affinity"
msgstr "控制區域 vcpu 的同屬"
#: src/virsh.c:1804
msgid "Pin domain VCPUs to host physical CPUs."
msgstr "讓區域 VCPU 符合主機的實際處理器。"
#: src/virsh.c:1810
msgid "vcpu number"
msgstr "vcpu 數量"
#: src/virsh.c:1811
msgid "host cpu number(s) (comma separated)"
msgstr "主機處理器數目(以逗號隔開)"
#: src/virsh.c:1839
msgid "vcpupin: Invalid or missing vCPU number."
msgstr ""
#: src/virsh.c:1845
msgid "vcpupin: Missing cpulist"
msgstr ""
#: src/virsh.c:1857
#, fuzzy
msgid "vcpupin: failed to get domain informations."
msgstr "無法取得節點資訊"
#: src/virsh.c:1863
msgid "vcpupin: Invalid vCPU number."
msgstr ""
#: src/virsh.c:1872
msgid "cpulist: Invalid format. Empty string."
msgstr ""
#: src/virsh.c:1882
#, c-format
msgid ""
"cpulist: %s: Invalid format. Expecting digit at position %d (near '%c')."
msgstr ""
#: src/virsh.c:1892
#, c-format
msgid ""
"cpulist: %s: Invalid format. Expecting digit or comma at position %d (near '%"
"c')."
msgstr ""
#: src/virsh.c:1899
#, c-format
msgid "cpulist: %s: Invalid format. Trailing comma at position %d."
msgstr ""
#: src/virsh.c:1913
#, c-format
msgid "Physical CPU %d doesn't exist."
msgstr "實體處理器「%d」不存在。"
#: src/virsh.c:1936
msgid "change number of virtual CPUs"
msgstr "改變虛擬處理器的數量"
#: src/virsh.c:1937
#, fuzzy
msgid "Change the number of virtual CPUs in the guest domain."
msgstr "改變在客座區域中啟用的虛擬器處理器數量"
#: src/virsh.c:1943
msgid "number of virtual CPUs"
msgstr "虛擬處理器的數量"
#: src/virsh.c:1963
#, fuzzy
msgid "Invalid number of virtual CPUs."
msgstr "虛擬處理器的數量"
#: src/virsh.c:1975
#, fuzzy
msgid "Too many virtual CPUs."
msgstr "太多虛擬處理器。"
#: src/virsh.c:1992
msgid "change memory allocation"
msgstr "改變記憶體分配"
#: src/virsh.c:1993
msgid "Change the current memory allocation in the guest domain."
msgstr "改變客座區域中,目前的記憶體分配。"
#: src/virsh.c:1999
#, fuzzy
msgid "number of kilobytes of memory"
msgstr "記憶體數量(位元組)"
#: src/virsh.c:2020 src/virsh.c:2032 src/virsh.c:2076
#, c-format
msgid "Invalid value of %d for memory size"
msgstr "記憶體大小 %d 不是有效的數值"
#: src/virsh.c:2026
msgid "Unable to verify MaxMemorySize"
msgstr ""
#: src/virsh.c:2048
msgid "change maximum memory limit"
msgstr "改變最大記憶體的限制"
#: src/virsh.c:2049
msgid "Change the maximum memory allocation limit in the guest domain."
msgstr "改變客座區域的最大記憶體分配限制。"
#: src/virsh.c:2055
#, fuzzy
msgid "maximum memory limit in kilobytes"
msgstr "最大記憶體限制(位元組)"
#: src/virsh.c:2082
msgid "Unable to verify current MemorySize"
msgstr ""
#: src/virsh.c:2089
#, fuzzy
msgid "Unable to shrink current MemorySize"
msgstr "區域目前的記憶體"
#: src/virsh.c:2095
msgid "Unable to change MaxMemorySize"
msgstr ""
#: src/virsh.c:2107
msgid "node information"
msgstr "節點資訊"
#: src/virsh.c:2108
msgid "Returns basic information about the node."
msgstr "傳回節點的基本資訊。"
#: src/virsh.c:2121
msgid "failed to get node information"
msgstr "無法取得節點資訊"
#: src/virsh.c:2124
msgid "CPU model:"
msgstr "處理器類型:"
#: src/virsh.c:2126
msgid "CPU frequency:"
msgstr "處理器的頻率:"
#: src/virsh.c:2127
msgid "CPU socket(s):"
msgstr "處理器的插槽:"
#: src/virsh.c:2128
msgid "Core(s) per socket:"
msgstr "每個插槽的核心:"
#: src/virsh.c:2129
msgid "Thread(s) per core:"
msgstr "每個核心的執行續:"
#: src/virsh.c:2130
msgid "NUMA cell(s):"
msgstr "NUMA cell"
#: src/virsh.c:2131
msgid "Memory size:"
msgstr "記憶體大小:"
#: src/virsh.c:2140
msgid "capabilities"
msgstr "能力"
#: src/virsh.c:2141
msgid "Returns capabilities of hypervisor/driver."
msgstr "傳回 hypervisor 或驅動程式的能力。"
#: src/virsh.c:2154
msgid "failed to get capabilities"
msgstr "無法取得能力方面的資訊"
#: src/virsh.c:2167
msgid "domain information in XML"
msgstr "XML 格式的區域資訊"
#: src/virsh.c:2168
#, fuzzy
msgid "Output the domain information as an XML dump to stdout."
msgstr "將區域資訊以 XML 格式輸出到螢幕上。"
#: src/virsh.c:2174
#, fuzzy
msgid "show inactive defined XML"
msgstr "列出非作用中的區域"
#: src/virsh.c:2175
msgid "include security sensitive information in XML dump"
msgstr ""
#: src/virsh.c:2216
msgid "convert a domain id or UUID to domain name"
msgstr "將區域 id 或 UUID 轉為區域名稱"
#: src/virsh.c:2222
msgid "domain id or uuid"
msgstr "區域 id 或 uuid"
#: src/virsh.c:2246
msgid "convert a domain name or UUID to domain id"
msgstr "將區域名稱或 UUID 轉為區域 ID"
#: src/virsh.c:2281
msgid "convert a domain name or id to domain UUID"
msgstr "將區域名稱或 ID 轉為 UUID"
#: src/virsh.c:2287
msgid "domain id or name"
msgstr "區域 ID 或名稱"
#: src/virsh.c:2306
msgid "failed to get domain UUID"
msgstr "無法取得區域 UUID"
#: src/virsh.c:2316
msgid "migrate domain to another host"
msgstr ""
#: src/virsh.c:2317
msgid "Migrate domain to another host. Add --live for live migration."
msgstr ""
#: src/virsh.c:2322
#, fuzzy
msgid "live migration"
msgstr "節點資訊"
#: src/virsh.c:2324
#, fuzzy
msgid "connection URI of the destination host"
msgstr "連接客座端主控台"
#: src/virsh.c:2325
msgid "migration URI, usually can be omitted"
msgstr ""
#: src/virsh.c:2326
msgid "rename to new name during migration (if supported)"
msgstr ""
#: src/virsh.c:2349
msgid "migrate: Missing desturi"
msgstr ""
#: src/virsh.c:2381
msgid "autostart a network"
msgstr "自動啟動網路"
#: src/virsh.c:2383
msgid "Configure a network to be automatically started at boot."
msgstr "將網路設定為開機時自動啟動。"
#: src/virsh.c:2388 src/virsh.c:2802
msgid "network name or uuid"
msgstr "網路名稱或 uuid"
#: src/virsh.c:2410
#, fuzzy, c-format
msgid "failed to mark network %s as autostarted"
msgstr "無法%s將網路標記為%s自動啟動"
#: src/virsh.c:2413
#, fuzzy, c-format
msgid "failed to unmark network %s as autostarted"
msgstr "無法%s將網路標記為%s自動啟動"
#: src/virsh.c:2420
#, fuzzy, c-format
msgid "Network %s marked as autostarted\n"
msgstr "網路 %s %s標記為自動啟動\n"
#: src/virsh.c:2422
#, fuzzy, c-format
msgid "Network %s unmarked as autostarted\n"
msgstr "網路 %s %s標記為自動啟動\n"
#: src/virsh.c:2431
msgid "create a network from an XML file"
msgstr "從 XML 檔案建立網路"
#: src/virsh.c:2432
msgid "Create a network."
msgstr "建立網路。"
#: src/virsh.c:2437 src/virsh.c:2484
msgid "file containing an XML network description"
msgstr "包含 XML 網路描述的檔案"
#: src/virsh.c:2464
#, c-format
msgid "Network %s created from %s\n"
msgstr "網路 %s 建立自 %s\n"
#: src/virsh.c:2467
#, c-format
msgid "Failed to create network from %s"
msgstr "無法從 %s 建立網路"
#: src/virsh.c:2478
msgid "define (but don't start) a network from an XML file"
msgstr "從 XML 檔案定義(但不啟動)網路"
#: src/virsh.c:2479
msgid "Define a network."
msgstr "定義網路。"
#: src/virsh.c:2511
#, c-format
msgid "Network %s defined from %s\n"
msgstr "網路 %s 定義自 %s\n"
#: src/virsh.c:2514
#, c-format
msgid "Failed to define network from %s"
msgstr "無法從 %s 定義網路"
#: src/virsh.c:2525
msgid "destroy a network"
msgstr "刪除一個網路"
#: src/virsh.c:2526
msgid "Destroy a given network."
msgstr "刪除給定的網路。"
#: src/virsh.c:2531 src/virsh.c:2570 src/virsh.c:5803
msgid "network name, id or uuid"
msgstr "網路名稱、id 或 uuid"
#: src/virsh.c:2549
#, c-format
msgid "Network %s destroyed\n"
msgstr "網路 %s 已經刪除\n"
#: src/virsh.c:2551
#, c-format
msgid "Failed to destroy network %s"
msgstr "無法刪除網路 %s"
#: src/virsh.c:2564
msgid "network information in XML"
msgstr "XML 格式的網路資訊"
#: src/virsh.c:2565
#, fuzzy
msgid "Output the network information as an XML dump to stdout."
msgstr "將網路資訊以 XML 格式輸出到螢幕上。"
#: src/virsh.c:2604
msgid "list networks"
msgstr "列出網路"
#: src/virsh.c:2605
msgid "Returns list of networks."
msgstr "傳回網路清單。"
#: src/virsh.c:2610
msgid "list inactive networks"
msgstr "列出非作用中的網路"
#: src/virsh.c:2611
msgid "list inactive & active networks"
msgstr "列出作用中與非作用中的網路"
#: src/virsh.c:2631 src/virsh.c:2639
msgid "Failed to list active networks"
msgstr "無法列出運作中的網路"
#: src/virsh.c:2650 src/virsh.c:2658
msgid "Failed to list inactive networks"
msgstr "無法列出非作用中的網路"
#: src/virsh.c:2667 src/virsh.c:3427
msgid "Autostart"
msgstr "自動啟動"
#: src/virsh.c:2682 src/virsh.c:2705 src/virsh.c:3442 src/virsh.c:3465
msgid "no autostart"
msgstr "不自動啟動"
#: src/virsh.c:2688 src/virsh.c:3448
msgid "active"
msgstr "啟用"
#: src/virsh.c:2711 src/virsh.c:3471 src/virsh.c:3673
msgid "inactive"
msgstr "非啟用中"
#: src/virsh.c:2727
msgid "convert a network UUID to network name"
msgstr "將網路 id 或 UUID 轉為網路名稱"
#: src/virsh.c:2733
msgid "network uuid"
msgstr "網路 uuid"
#: src/virsh.c:2758
msgid "start a (previously defined) inactive network"
msgstr "開啟(先前定義的)非作用中網路"
#: src/virsh.c:2759
msgid "Start a network."
msgstr "啟動一個網路。"
#: src/virsh.c:2764
msgid "name of the inactive network"
msgstr "非作用中網路的名稱"
#: src/virsh.c:2781
#, c-format
msgid "Network %s started\n"
msgstr "網路 %s 已開啟\n"
#: src/virsh.c:2784
#, c-format
msgid "Failed to start network %s"
msgstr "無法開啟網路 %s"
#: src/virsh.c:2796
msgid "undefine an inactive network"
msgstr "取消定義非作用中的網路"
#: src/virsh.c:2797
msgid "Undefine the configuration for an inactive network."
msgstr "為非作用中的網路取消定義。"
#: src/virsh.c:2820
#, c-format
msgid "Network %s has been undefined\n"
msgstr "網路 %s 已經取消定義\n"
#: src/virsh.c:2822
#, c-format
msgid "Failed to undefine network %s"
msgstr "無法為網路 %s 取消定義"
#: src/virsh.c:2834
msgid "convert a network name to network UUID"
msgstr "將網路名稱轉為網路 UUID"
#: src/virsh.c:2840
msgid "network name"
msgstr "網路名稱"
#: src/virsh.c:2860
msgid "failed to get network UUID"
msgstr "無法取得網路 UUID"
#: src/virsh.c:2870
#, fuzzy
msgid "autostart a pool"
msgstr "自動啟動一個區域"
#: src/virsh.c:2872
#, fuzzy
msgid "Configure a pool to be automatically started at boot."
msgstr "將區域設定為開機時自動啟動。"
#: src/virsh.c:2877 src/virsh.c:3174 src/virsh.c:3213 src/virsh.c:3252
#: src/virsh.c:3291 src/virsh.c:3330 src/virsh.c:3644 src/virsh.c:3909
#: src/virsh.c:4043 src/virsh.c:4084 src/virsh.c:4135 src/virsh.c:4176
#: src/virsh.c:4320 src/virsh.c:5820
#, fuzzy
msgid "pool name or uuid"
msgstr "區域名稱或 uuid"
#: src/virsh.c:2899
#, fuzzy, c-format
msgid "failed to mark pool %s as autostarted"
msgstr "無法%s將網路標記為%s自動啟動"
#: src/virsh.c:2902
#, fuzzy, c-format
msgid "failed to unmark pool %s as autostarted"
msgstr "無法%s將網路標記為%s自動啟動"
#: src/virsh.c:2909
#, fuzzy, c-format
msgid "Pool %s marked as autostarted\n"
msgstr "區域 %s %s已標記為自動啟動\n"
#: src/virsh.c:2911
#, fuzzy, c-format
msgid "Pool %s unmarked as autostarted\n"
msgstr "區域 %s %s已標記為自動啟動\n"
#: src/virsh.c:2920
#, fuzzy
msgid "create a pool from an XML file"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:2921 src/virsh.c:3040
#, fuzzy
msgid "Create a pool."
msgstr "建立區域。"
#: src/virsh.c:2927 src/virsh.c:3086
#, fuzzy
msgid "file containing an XML pool description"
msgstr "包含 XML 區域描述的檔案"
#: src/virsh.c:2954
#, fuzzy, c-format
msgid "Pool %s created from %s\n"
msgstr "區域 %s 建立自 %s\n"
#: src/virsh.c:2957
#, fuzzy, c-format
msgid "Failed to create pool from %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:2968
#, fuzzy
msgid "name of the pool"
msgstr "非作用中區域的名稱"
#: src/virsh.c:2969
msgid "print XML document, but don't define/create"
msgstr ""
#: src/virsh.c:2970
msgid "type of the pool"
msgstr ""
#: src/virsh.c:2971
msgid "source-host for underlying storage"
msgstr ""
#: src/virsh.c:2972
msgid "source path for underlying storage"
msgstr ""
#: src/virsh.c:2973
msgid "source device for underlying storage"
msgstr ""
#: src/virsh.c:2974
msgid "source name for underlying storage"
msgstr ""
#: src/virsh.c:2975
msgid "target for underlying storage"
msgstr ""
#: src/virsh.c:3022 src/virsh.c:3875
#, fuzzy
msgid "Failed to allocate XML buffer"
msgstr "無法分配節點"
#: src/virsh.c:3039
#, fuzzy
msgid "create a pool from a set of args"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:3065
#, fuzzy, c-format
msgid "Pool %s created\n"
msgstr "區域 %s 建立自 %s\n"
#: src/virsh.c:3068
#, fuzzy, c-format
msgid "Failed to create pool %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:3080
#, fuzzy
msgid "define (but don't start) a pool from an XML file"
msgstr "從 XML 檔案定義(但不啟動)區域"
#: src/virsh.c:3081 src/virsh.c:3128
#, fuzzy
msgid "Define a pool."
msgstr "定義區域。"
#: src/virsh.c:3113
#, fuzzy, c-format
msgid "Pool %s defined from %s\n"
msgstr "區域 %s 定義自 %s\n"
#: src/virsh.c:3116
#, fuzzy, c-format
msgid "Failed to define pool from %s"
msgstr "無法從 %s 定義區域"
#: src/virsh.c:3127
msgid "define a pool from a set of args"
msgstr ""
#: src/virsh.c:3153
#, fuzzy, c-format
msgid "Pool %s defined\n"
msgstr "區域 %s 定義自 %s\n"
#: src/virsh.c:3156
#, fuzzy, c-format
msgid "Failed to define pool %s"
msgstr "無法為區域 %s 取消定義"
#: src/virsh.c:3168
msgid "build a pool"
msgstr ""
#: src/virsh.c:3169
msgid "Build a given pool."
msgstr ""
#: src/virsh.c:3192
#, fuzzy, c-format
msgid "Pool %s built\n"
msgstr "區域 %s 已經刪除\n"
#: src/virsh.c:3194
#, fuzzy, c-format
msgid "Failed to build pool %s"
msgstr "無法暫停區域 %s"
#: src/virsh.c:3207
#, fuzzy
msgid "destroy a pool"
msgstr "刪除一個區域"
#: src/virsh.c:3208
#, fuzzy
msgid "Destroy a given pool."
msgstr "刪除給定的區域。"
#: src/virsh.c:3231
#, fuzzy, c-format
msgid "Pool %s destroyed\n"
msgstr "區域 %s 已經刪除\n"
#: src/virsh.c:3233
#, fuzzy, c-format
msgid "Failed to destroy pool %s"
msgstr "無法刪除區域 %s"
#: src/virsh.c:3246
msgid "delete a pool"
msgstr ""
#: src/virsh.c:3247
#, fuzzy
msgid "Delete a given pool."
msgstr "刪除給定的區域。"
#: src/virsh.c:3270
#, fuzzy, c-format
msgid "Pool %s deleted\n"
msgstr "區域 %s 已經刪除\n"
#: src/virsh.c:3272
#, fuzzy, c-format
msgid "Failed to delete pool %s"
msgstr "無法刪除區域 %s"
#: src/virsh.c:3285
msgid "refresh a pool"
msgstr ""
#: src/virsh.c:3286
msgid "Refresh a given pool."
msgstr ""
#: src/virsh.c:3309
#, fuzzy, c-format
msgid "Pool %s refreshed\n"
msgstr "區域 %s 已經繼續執行\n"
#: src/virsh.c:3311
#, fuzzy, c-format
msgid "Failed to refresh pool %s"
msgstr "無法繼續區域 %s"
#: src/virsh.c:3324
#, fuzzy
msgid "pool information in XML"
msgstr "XML 格式的區域資訊"
#: src/virsh.c:3325
#, fuzzy
msgid "Output the pool information as an XML dump to stdout."
msgstr "將區域資訊以 XML 格式輸出到螢幕上。"
#: src/virsh.c:3364
#, fuzzy
msgid "list pools"
msgstr "列出區域"
#: src/virsh.c:3365
#, fuzzy
msgid "Returns list of pools."
msgstr "傳回區域清單。"
#: src/virsh.c:3370
#, fuzzy
msgid "list inactive pools"
msgstr "列出非作用中的區域"
#: src/virsh.c:3371
#, fuzzy
msgid "list inactive & active pools"
msgstr "列出作用中與非作用中的區域"
#: src/virsh.c:3391 src/virsh.c:3399
#, fuzzy
msgid "Failed to list active pools"
msgstr "無法列出運作中的區域"
#: src/virsh.c:3410 src/virsh.c:3418
#, fuzzy
msgid "Failed to list inactive pools"
msgstr "無法列出非作用中的區域"
#: src/virsh.c:3486
msgid "find potential storage pool sources"
msgstr ""
#: src/virsh.c:3487 src/virsh.c:3567
msgid "Returns XML <sources> document."
msgstr ""
#: src/virsh.c:3493
msgid "type of storage pool sources to find"
msgstr ""
#: src/virsh.c:3494
msgid "optional host to query"
msgstr ""
#: src/virsh.c:3495
msgid "optional port to query"
msgstr ""
#: src/virsh.c:3540
#, fuzzy
msgid "Out of memory"
msgstr "記憶體不足"
#: src/virsh.c:3543
#, c-format
msgid "virAsprintf failed (errno %d)"
msgstr ""
#: src/virsh.c:3552 src/virsh.c:3603
#, fuzzy, c-format
msgid "Failed to find any %s pool sources"
msgstr "無法將區域 %s 存至 %s"
#: src/virsh.c:3566
msgid "discover potential storage pool sources"
msgstr ""
#: src/virsh.c:3573
msgid "type of storage pool sources to discover"
msgstr ""
#: src/virsh.c:3575
msgid "optional file of source xml to query for pools"
msgstr ""
#: src/virsh.c:3638
#, fuzzy
msgid "storage pool information"
msgstr "節點資訊"
#: src/virsh.c:3639
#, fuzzy
msgid "Returns basic information about the storage pool."
msgstr "傳回節點的基本資訊。"
#: src/virsh.c:3677
msgid "building"
msgstr ""
#: src/virsh.c:3681 src/virsh.c:6699 src/virsh.c:6725
msgid "running"
msgstr "執行中"
#: src/virsh.c:3685
msgid "degraded"
msgstr ""
#: src/virsh.c:3692 src/virsh.c:4112
msgid "Capacity:"
msgstr ""
#: src/virsh.c:3695 src/virsh.c:4115
#, fuzzy
msgid "Allocation:"
msgstr "分配區域"
#: src/virsh.c:3698
msgid "Available:"
msgstr ""
#: src/virsh.c:3713
#, fuzzy
msgid "convert a pool UUID to pool name"
msgstr "將網路 id 或 UUID 轉為網路名稱"
#: src/virsh.c:3719
#, fuzzy
msgid "pool uuid"
msgstr "區域的 uuid"
#: src/virsh.c:3744
#, fuzzy
msgid "start a (previously defined) inactive pool"
msgstr "開啟(先前定義的)非作用中區域"
#: src/virsh.c:3745
#, fuzzy
msgid "Start a pool."
msgstr "開啟一個區域。"
#: src/virsh.c:3750
#, fuzzy
msgid "name of the inactive pool"
msgstr "非作用中區域的名稱"
#: src/virsh.c:3767
#, fuzzy, c-format
msgid "Pool %s started\n"
msgstr "區域 %s 已開啟\n"
#: src/virsh.c:3770
#, fuzzy, c-format
msgid "Failed to start pool %s"
msgstr "無法開啟區域 %s"
#: src/virsh.c:3782
#, fuzzy
msgid "create a volume from a set of args"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:3783 src/virsh.c:3980
#, fuzzy
msgid "Create a vol."
msgstr "建立區域。"
#: src/virsh.c:3788 src/virsh.c:3947 src/virsh.c:3985
#, fuzzy
msgid "pool name"
msgstr "區域名稱"
#: src/virsh.c:3789
#, fuzzy
msgid "name of the volume"
msgstr "非作用中區域的名稱"
#: src/virsh.c:3790
msgid "size of the vol with optional k,M,G,T suffix"
msgstr ""
#: src/virsh.c:3791
msgid "initial allocation size with optional k,M,G,T suffix"
msgstr ""
#: src/virsh.c:3792
msgid "file format type raw,bochs,qcow,qcow2,vmdk"
msgstr ""
#: src/virsh.c:3850 src/virsh.c:3855
#, c-format
msgid "Malformed size %s"
msgstr ""
#: src/virsh.c:3884
#, fuzzy, c-format
msgid "Vol %s created\n"
msgstr "區域 %s 建立自 %s\n"
#: src/virsh.c:3888
#, fuzzy, c-format
msgid "Failed to create vol %s"
msgstr "無法讀取插槽 %d\n"
#: src/virsh.c:3903
#, fuzzy
msgid "undefine an inactive pool"
msgstr "取消定義非作用中的區域"
#: src/virsh.c:3904
#, fuzzy
msgid "Undefine the configuration for an inactive pool."
msgstr "為非作用中的區域取消定義。"
#: src/virsh.c:3927
#, fuzzy, c-format
msgid "Pool %s has been undefined\n"
msgstr "區域 %s 已經取消定義\n"
#: src/virsh.c:3929
#, fuzzy, c-format
msgid "Failed to undefine pool %s"
msgstr "無法為區域 %s 取消定義"
#: src/virsh.c:3941
#, fuzzy
msgid "convert a pool name to pool UUID"
msgstr "將網路名稱轉為網路 UUID"
#: src/virsh.c:3967
#, fuzzy
msgid "failed to get pool UUID"
msgstr "無法取得區域 UUID"
#: src/virsh.c:3979
#, fuzzy
msgid "create a vol from an XML file"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:3986
#, fuzzy
msgid "file containing an XML vol description"
msgstr "包含 XML 區域描述的檔案"
#: src/virsh.c:4023
#, fuzzy, c-format
msgid "Vol %s created from %s\n"
msgstr "區域 %s 建立自 %s\n"
#: src/virsh.c:4027
#, fuzzy, c-format
msgid "Failed to create vol from %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:4037
msgid "delete a vol"
msgstr ""
#: src/virsh.c:4038
#, fuzzy
msgid "Delete a given vol."
msgstr "刪除給定的區域。"
#: src/virsh.c:4044 src/virsh.c:4085 src/virsh.c:4136
msgid "vol name, key or path"
msgstr ""
#: src/virsh.c:4063
#, fuzzy, c-format
msgid "Vol %s deleted\n"
msgstr "區域 %s 已經刪除\n"
#: src/virsh.c:4065
#, fuzzy, c-format
msgid "Failed to delete vol %s"
msgstr "無法刪除區域 %s"
#: src/virsh.c:4078
#, fuzzy
msgid "storage vol information"
msgstr "節點資訊"
#: src/virsh.c:4079
#, fuzzy
msgid "Returns basic information about the storage vol."
msgstr "傳回節點的基本資訊。"
#: src/virsh.c:4107
#, fuzzy
msgid "Type:"
msgstr "作業系統類型:"
#: src/virsh.c:4109
msgid "file"
msgstr ""
#: src/virsh.c:4109
#, fuzzy
msgid "block"
msgstr "以組絕"
#: src/virsh.c:4129
#, fuzzy
msgid "vol information in XML"
msgstr "XML 格式的區域資訊"
#: src/virsh.c:4130
#, fuzzy
msgid "Output the vol information as an XML dump to stdout."
msgstr "將區域資訊以 XML 格式輸出到螢幕上。"
#: src/virsh.c:4170
#, fuzzy
msgid "list vols"
msgstr "列出區域"
#: src/virsh.c:4171
#, fuzzy
msgid "Returns list of vols by pool."
msgstr "傳回區域清單。"
#: src/virsh.c:4196 src/virsh.c:4204
#, fuzzy
msgid "Failed to list active vols"
msgstr "無法列出運作中的區域"
#: src/virsh.c:4212
msgid "Path"
msgstr ""
#: src/virsh.c:4248
#, fuzzy
msgid "convert a vol UUID to vol name"
msgstr "將網路 id 或 UUID 轉為網路名稱"
#: src/virsh.c:4254
msgid "vol key or path"
msgstr ""
#: src/virsh.c:4281
#, fuzzy
msgid "convert a vol UUID to vol key"
msgstr "將網路 id 或 UUID 轉為網路名稱"
#: src/virsh.c:4287
#, fuzzy
msgid "vol uuid"
msgstr "區域的 uuid"
#: src/virsh.c:4314
#, fuzzy
msgid "convert a vol UUID to vol path"
msgstr "將網路 id 或 UUID 轉為網路名稱"
#: src/virsh.c:4321
msgid "vol name or key"
msgstr ""
#: src/virsh.c:4351
msgid "show version"
msgstr "顯示版本"
#: src/virsh.c:4352
msgid "Display the system version information."
msgstr "顯示系統版本的資訊。"
#: src/virsh.c:4375
msgid "failed to get hypervisor type"
msgstr "無法取得 hypervisor 類型"
#: src/virsh.c:4384
#, c-format
msgid "Compiled against library: libvir %d.%d.%d\n"
msgstr "用此函式庫來編譯libvir %d.%d.%d\n"
#: src/virsh.c:4389
msgid "failed to get the library version"
msgstr "無法取得函式庫的版本"
#: src/virsh.c:4396
#, c-format
msgid "Using library: libvir %d.%d.%d\n"
msgstr "使用函式庫libvir %d.%d.%d\n"
#: src/virsh.c:4403
#, c-format
msgid "Using API: %s %d.%d.%d\n"
msgstr "使用 API%s %d.%d.%d\n"
#: src/virsh.c:4408
msgid "failed to get the hypervisor version"
msgstr "無法取得 hypervisor 的版本"
#: src/virsh.c:4413
#, c-format
msgid "Cannot extract running %s hypervisor version\n"
msgstr "無法解開執行中 %s hypervisor 的版本\n"
#: src/virsh.c:4420
#, c-format
msgid "Running hypervisor: %s %d.%d.%d\n"
msgstr "執行 hypervisor%s %d.%d.%d\n"
#: src/virsh.c:4430
msgid "enumerate devices on this host"
msgstr ""
#: src/virsh.c:4436
#, fuzzy
msgid "list devices in a tree"
msgstr "找不到裝置的資訊"
#: src/virsh.c:4437
#, fuzzy
msgid "capability name"
msgstr "能力"
#: src/virsh.c:4536
#, fuzzy
msgid "Failed to count node devices"
msgstr "無法連上 hypervisor"
#: src/virsh.c:4546
#, fuzzy
msgid "Failed to list node devices"
msgstr "無法列出非作用中的區域"
#: src/virsh.c:4596
msgid "node device details in XML"
msgstr ""
#: src/virsh.c:4597
#, fuzzy
msgid "Output the node device details as an XML dump to stdout."
msgstr "將網路資訊以 XML 格式輸出到螢幕上。"
#: src/virsh.c:4603 src/virsh.c:4638 src/virsh.c:4679 src/virsh.c:4720
msgid "device key"
msgstr ""
#: src/virsh.c:4618 src/virsh.c:4654 src/virsh.c:4695 src/virsh.c:4736
msgid "Could not find matching device"
msgstr ""
#: src/virsh.c:4631
msgid "dettach node device its device driver"
msgstr ""
#: src/virsh.c:4632 src/virsh.c:4673
msgid "Dettach node device its device driver before assigning to a domain."
msgstr ""
#: src/virsh.c:4659
#, fuzzy, c-format
msgid "Device %s dettached\n"
msgstr "區域 %s 已經刪除\n"
#: src/virsh.c:4661
#, fuzzy, c-format
msgid "Failed to dettach device %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:4672
msgid "reattach node device its device driver"
msgstr ""
#: src/virsh.c:4700
#, c-format
msgid "Device %s re-attached\n"
msgstr ""
#: src/virsh.c:4702
#, fuzzy, c-format
msgid "Failed to re-attach device %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:4713
#, fuzzy
msgid "reset node device"
msgstr "無法列出非作用中的區域"
#: src/virsh.c:4714
#, fuzzy
msgid "Reset node device before or after assigning to a domain."
msgstr "傳回執行中區域的狀態"
#: src/virsh.c:4741
#, fuzzy, c-format
msgid "Device %s reset\n"
msgstr "區域 %s 已經繼續執行\n"
#: src/virsh.c:4743
#, fuzzy, c-format
msgid "Failed to reset device %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:4754
#, fuzzy
msgid "print the hypervisor hostname"
msgstr "無法取得 hypervisor 類型"
#: src/virsh.c:4769
#, fuzzy
msgid "failed to get hostname"
msgstr "無法取得 hypervisor 類型"
#: src/virsh.c:4783
#, fuzzy
msgid "print the hypervisor canonical URI"
msgstr "hypervisor 連線的 URI"
#: src/virsh.c:4798
#, fuzzy
msgid "failed to get URI"
msgstr "無法取得區域 UUID"
#: src/virsh.c:4812
msgid "vnc display"
msgstr "vnc 顯示"
#: src/virsh.c:4813
#, fuzzy
msgid "Output the IP address and port number for the VNC display."
msgstr "為 VNC 顯示模式輸出 IP 位址與連接埠號。"
#: src/virsh.c:4887
msgid "tty console"
msgstr ""
#: src/virsh.c:4888
msgid "Output the device for the TTY console."
msgstr ""
#: src/virsh.c:4948
#, fuzzy
msgid "attach device from an XML file"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:4949
#, fuzzy
msgid "Attach device from an XML <file>."
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:4955 src/virsh.c:5013
msgid "XML file"
msgstr ""
#: src/virsh.c:4976
msgid "attach-device: Missing <file> option"
msgstr ""
#: src/virsh.c:4990
#, fuzzy, c-format
msgid "Failed to attach device from %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:4994
msgid "Device attached successfully\n"
msgstr ""
#: src/virsh.c:5006
#, fuzzy
msgid "detach device from an XML file"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:5007
#, fuzzy
msgid "Detach device from an XML <file>"
msgstr "從 XML 檔案建立區域"
#: src/virsh.c:5034
msgid "detach-device: Missing <file> option"
msgstr ""
#: src/virsh.c:5048
#, fuzzy, c-format
msgid "Failed to detach device from %s"
msgstr "無法從 %s 建立區域"
#: src/virsh.c:5052
msgid "Device detached successfully\n"
msgstr ""
#: src/virsh.c:5064
#, fuzzy
msgid "attach network interface"
msgstr "網路名稱"
#: src/virsh.c:5065
msgid "Attach new network interface."
msgstr ""
#: src/virsh.c:5071 src/virsh.c:5187
#, fuzzy
msgid "network interface type"
msgstr "網路名稱"
#: src/virsh.c:5072
#, fuzzy
msgid "source of network interface"
msgstr "未定義的網路名稱"
#: src/virsh.c:5073
#, fuzzy
msgid "target network name"
msgstr "網路名稱"
#: src/virsh.c:5074 src/virsh.c:5188
#, fuzzy
msgid "MAC address"
msgstr "無效的參數,於 %s"
#: src/virsh.c:5075
msgid "script used to bridge network interface"
msgstr ""
#: src/virsh.c:5107
#, c-format
msgid "No support %s in command 'attach-interface'"
msgstr ""
#: src/virsh.c:5163
msgid "Interface attached successfully\n"
msgstr ""
#: src/virsh.c:5180
#, fuzzy
msgid "detach network interface"
msgstr "網路名稱"
#: src/virsh.c:5181
msgid "Detach network interface."
msgstr ""
#: src/virsh.c:5226 src/virsh.c:5231
#, fuzzy
msgid "Failed to get interface information"
msgstr "無法取得節點資訊"
#: src/virsh.c:5239
#, c-format
msgid "No found interface whose type is %s"
msgstr ""
#: src/virsh.c:5261
#, c-format
msgid "No found interface whose MAC address is %s"
msgstr ""
#: src/virsh.c:5267 src/virsh.c:5543
#, fuzzy
msgid "Failed to allocate memory"
msgstr "無法分配節點"
#: src/virsh.c:5272 src/virsh.c:5548
#, fuzzy
msgid "Failed to create XML"
msgstr "無法讀取插槽 %d\n"
#: src/virsh.c:5280
msgid "Interface detached successfully\n"
msgstr ""
#: src/virsh.c:5300
msgid "attach disk device"
msgstr ""
#: src/virsh.c:5301
msgid "Attach new disk device."
msgstr ""
#: src/virsh.c:5307
msgid "source of disk device"
msgstr ""
#: src/virsh.c:5308 src/virsh.c:5471
msgid "target of disk device"
msgstr ""
#: src/virsh.c:5309
msgid "driver of disk device"
msgstr ""
#: src/virsh.c:5310
msgid "subdriver of disk device"
msgstr ""
#: src/virsh.c:5311
msgid "target device type"
msgstr ""
#: src/virsh.c:5312
msgid "mode of device reading and writing"
msgstr ""
#: src/virsh.c:5343 src/virsh.c:5352 src/virsh.c:5359
#, c-format
msgid "No support %s in command 'attach-disk'"
msgstr ""
#: src/virsh.c:5448
msgid "Disk attached successfully\n"
msgstr ""
#: src/virsh.c:5464
msgid "detach disk device"
msgstr ""
#: src/virsh.c:5465
msgid "Detach disk device."
msgstr ""
#: src/virsh.c:5506 src/virsh.c:5511 src/virsh.c:5518
#, fuzzy
msgid "Failed to get disk information"
msgstr "無法取得節點資訊"
#: src/virsh.c:5537
#, c-format
msgid "No found disk whose target is %s"
msgstr ""
#: src/virsh.c:5556
msgid "Disk detached successfully\n"
msgstr ""
#: src/virsh.c:5583
#, fuzzy, c-format
msgid "malloc: failed to allocate temporary file name: %s"
msgstr "無法分配節點"
#: src/virsh.c:5594
#, fuzzy, c-format
msgid "mkstemp: failed to create temporary file: %s"
msgstr "無法寫入設定檔"
#: src/virsh.c:5601
#, fuzzy, c-format
msgid "write: %s: failed to write to temporary file: %s"
msgstr "無法寫入設定檔"
#: src/virsh.c:5610
#, fuzzy, c-format
msgid "close: %s: failed to write or close temporary file: %s"
msgstr "無法寫入設定檔"
#: src/virsh.c:5640
#, c-format
msgid ""
"%s: $EDITOR environment variable contains shell meta or other unacceptable "
"characters"
msgstr ""
#: src/virsh.c:5647
#, c-format
msgid ""
"%s: temporary filename contains shell meta or other unacceptable characters "
"(is $TMPDIR wrong?)"
msgstr ""
#: src/virsh.c:5654
#, fuzzy, c-format
msgid "virAsprintf: could not create editing command: %s"
msgstr "無法建立非運作中的區域 %s\n"
#: src/virsh.c:5662
#, fuzzy, c-format
msgid "%s: edit command failed: %s"
msgstr "無法寫入設定檔"
#: src/virsh.c:5668
#, c-format
msgid "%s: command exited with non-zero status"
msgstr ""
#: src/virsh.c:5683
#, fuzzy, c-format
msgid "%s: failed to read temporary file: %s"
msgstr "無法寫入設定檔"
#: src/virsh.c:5694
#, fuzzy
msgid "edit XML configuration for a domain"
msgstr "為非作用中的區域取消定義。"
#: src/virsh.c:5695
#, fuzzy
msgid "Edit the XML configuration for a domain."
msgstr "為非作用中的區域取消定義。"
#: src/virsh.c:5746
#, c-format
msgid "Domain %s XML configuration not changed.\n"
msgstr ""
#: src/virsh.c:5762
msgid "ERROR: the XML configuration was changed by another user"
msgstr ""
#: src/virsh.c:5772
#, fuzzy, c-format
msgid "Domain %s XML configuration edited.\n"
msgstr "無法讀取設定檔"
#: src/virsh.c:5797
#, fuzzy
msgid "edit XML configuration for a network"
msgstr "為非作用中的網路取消定義。"
#: src/virsh.c:5798
#, fuzzy
msgid "Edit the XML configuration for a network."
msgstr "為非作用中的網路取消定義。"
#: src/virsh.c:5814
#, fuzzy
msgid "edit XML configuration for a storage pool"
msgstr "為非作用中的區域取消定義。"
#: src/virsh.c:5815
#, fuzzy
msgid "Edit the XML configuration for a storage pool."
msgstr "為非作用中的區域取消定義。"
#: src/virsh.c:5831
msgid "quit this interactive terminal"
msgstr "離開這互動式的終端機"
#: src/virsh.c:6016
#, c-format
msgid "command '%s' requires <%s> option"
msgstr "「%s」指令需要 <%s> 選項"
#: src/virsh.c:6017
#, c-format
msgid "command '%s' requires --%s option"
msgstr "「%s」指令需要 --%s 選項"
#: src/virsh.c:6044
#, c-format
msgid "command '%s' doesn't exist"
msgstr "「%s」指令不存在"
#: src/virsh.c:6051
msgid " NAME\n"
msgstr " 名稱\n"
#: src/virsh.c:6054
#, fuzzy
msgid ""
"\n"
" SYNOPSIS\n"
msgstr ""
"\n"
" 選項\n"
#: src/virsh.c:6063
#, fuzzy, c-format
msgid "[--%s <number>]"
msgstr "--%s <number>"
#: src/virsh.c:6065
#, fuzzy, c-format
msgid "[--%s <string>]"
msgstr "--%s <string>"
#: src/virsh.c:6078
msgid ""
"\n"
" DESCRIPTION\n"
msgstr ""
"\n"
" 描述\n"
#: src/virsh.c:6084
msgid ""
"\n"
" OPTIONS\n"
msgstr ""
"\n"
" 選項\n"
#: src/virsh.c:6089
#, c-format
msgid "--%s <number>"
msgstr "--%s <number>"
#: src/virsh.c:6091
#, c-format
msgid "--%s <string>"
msgstr "--%s <string>"
#: src/virsh.c:6244
#, c-format
msgid "internal error: virsh %s: no %s VSH_OT_DATA option"
msgstr ""
#: src/virsh.c:6261
msgid "undefined domain name or id"
msgstr "未定義的區域名稱或 id"
#: src/virsh.c:6293
#, c-format
msgid "failed to get domain '%s'"
msgstr "無法取得區域「%s」"
#: src/virsh.c:6309
msgid "undefined network name"
msgstr "未定義的網路名稱"
#: src/virsh.c:6333
#, c-format
msgid "failed to get network '%s'"
msgstr "無法取得網路「%s」"
#: src/virsh.c:6346 src/virsh.c:6392
#, fuzzy
msgid "undefined pool name"
msgstr "未定義的網路名稱"
#: src/virsh.c:6370
#, fuzzy, c-format
msgid "failed to get pool '%s'"
msgstr "無法取得區域「%s」"
#: src/virsh.c:6387
#, fuzzy
msgid "undefined vol name"
msgstr "未定義的網路名稱"
#: src/virsh.c:6423
#, fuzzy, c-format
msgid "failed to get vol '%s'"
msgstr "無法取得區域「%s」"
#: src/virsh.c:6457
#, c-format
msgid ""
"\n"
"(Time: %.3f ms)\n"
"\n"
msgstr ""
"\n"
"(時間:%.3f 毫秒)\n"
"\n"
#: src/virsh.c:6531
msgid "missing \""
msgstr "找不到 \""
#: src/virsh.c:6592
#, c-format
msgid "unexpected token (command name): '%s'"
msgstr "無預期的 token指令名稱「%s」"
#: src/virsh.c:6597
#, c-format
msgid "unknown command: '%s'"
msgstr "未知的指令:「%s」"
#: src/virsh.c:6604
#, c-format
msgid "command '%s' doesn't support option --%s"
msgstr "「%s」指令並不支援 --%s 選項"
#: src/virsh.c:6619
#, c-format
msgid "expected syntax: --%s <%s>"
msgstr "語法:--%s <%s>"
#: src/virsh.c:6622
msgid "number"
msgstr "數量"
#: src/virsh.c:6622
msgid "string"
msgstr "字串"
#: src/virsh.c:6628
#, c-format
msgid "unexpected data '%s'"
msgstr "無預期的資料「%s」"
#: src/virsh.c:6650
msgid "OPTION"
msgstr "選項"
#: src/virsh.c:6650
msgid "DATA"
msgstr "資料"
#: src/virsh.c:6701 src/virsh.c:6723
msgid "idle"
msgstr ""
#: src/virsh.c:6703
msgid "paused"
msgstr "已暫停"
#: src/virsh.c:6705
msgid "in shutdown"
msgstr "關機中"
#: src/virsh.c:6707
msgid "shut off"
msgstr "關機"
#: src/virsh.c:6709
msgid "crashed"
msgstr "當機"
#: src/virsh.c:6721
msgid "offline"
msgstr "離線"
#: src/virsh.c:6740
msgid "no valid connection"
msgstr "沒有有效的連線"
#: src/virsh.c:6787
#, c-format
msgid "%s: error: "
msgstr "%s錯誤"
#: src/virsh.c:6789
msgid "error: "
msgstr "錯誤:"
#: src/virsh.c:6811 src/virsh.c:6823 src/virsh.c:6836
#, c-format
msgid "%s: %d: failed to allocate %d bytes"
msgstr "%s%d無法分配 %d 位元組"
#: src/virsh.c:6850
#, c-format
msgid "%s: %d: failed to allocate %lu bytes"
msgstr "%s%d無法分配 %lu 位元組"
#: src/virsh.c:6879
msgid "failed to connect to the hypervisor"
msgstr "無法連上 hypervisor"
#: src/virsh.c:6911
#, fuzzy
msgid "failed to get the log file information"
msgstr "無法取得節點資訊"
#: src/virsh.c:6916
msgid "the log path is not a file"
msgstr ""
#: src/virsh.c:6923
msgid "failed to open the log file. check the log file path"
msgstr ""
#: src/virsh.c:6991
#, fuzzy
msgid "failed to write the log file"
msgstr "無法寫入設定檔"
#: src/virsh.c:7006
#, fuzzy, c-format
msgid "%s: failed to write log file: %s"
msgstr "無法寫入設定檔"
#: src/virsh.c:7186
#, fuzzy
msgid "failed to disconnect from the hypervisor"
msgstr "無法從 hypervisor 處斷線"
#: src/virsh.c:7201
#, fuzzy, c-format
msgid ""
"\n"
"%s [options] [commands]\n"
"\n"
" options:\n"
" -c | --connect <uri> hypervisor connection URI\n"
" -r | --readonly connect readonly\n"
" -d | --debug <num> debug level [0-5]\n"
" -h | --help this help\n"
" -q | --quiet quiet mode\n"
" -t | --timing print timing information\n"
" -l | --log <file> output logging to file\n"
" -v | --version program version\n"
"\n"
" commands (non interactive mode):\n"
msgstr ""
"\n"
"%s [選項] [命令]\n"
"\n"
" 選項:\n"
" -c | --connect <uri> hypervisor 連線的 URI\n"
" -r | --readonly 用唯讀方式連線\n"
" -d | --debug <num> 偵錯等級 [0-5]\n"
" -h | --help 本求助畫面\n"
" -q | --quiet 安靜模式\n"
" -t | --timing 列印時間訊息\n"
" -v | --version 程式版本\n"
"\n"
" 命令(非互動式模式):\n"
#: src/virsh.c:7219
#, fuzzy
msgid ""
"\n"
" (specify help <command> for details about the command)\n"
"\n"
msgstr ""
"\n"
" (請使用 --help <指令> 以取得關於指令的詳細資料)\n"
"\n"
#: src/virsh.c:7312
#, c-format
msgid "unsupported option '-%c'. See --help."
msgstr "不支援的選項「-%c」。請參閱 --help。"
#: src/virsh.c:7320
#, c-format
msgid "extra argument '%s'. See --help."
msgstr ""
#: src/virsh.c:7402
#, c-format
msgid ""
"Welcome to %s, the virtualization interactive terminal.\n"
"\n"
msgstr ""
"歡迎使用 %s - 虛擬化的互動模式終端機。\n"
"\n"
#: src/virsh.c:7405
msgid ""
"Type: 'help' for help with commands\n"
" 'quit' to quit\n"
"\n"
msgstr ""
"類型: 「help」以取得指令的求助畫面\n"
" 「quit」離開\n"
"\n"
#: src/virterror.c:205
#, fuzzy
msgid "Unknown failure"
msgstr "未知的主機"
#: src/virterror.c:519
msgid "warning"
msgstr "警告"
#: src/virterror.c:522
msgid "error"
msgstr "錯誤"
#: src/virterror.c:648
msgid "No error message provided"
msgstr "無法提供錯誤訊息"
#: src/virterror.c:711
#, c-format
msgid "internal error %s"
msgstr "內部錯誤 %s"
#: src/virterror.c:713
msgid "internal error"
msgstr "內部錯誤"
#: src/virterror.c:716
msgid "out of memory"
msgstr "記憶體不足"
#: src/virterror.c:720
#, fuzzy
msgid "this function is not supported by the hypervisor"
msgstr "不支援 hypervisor"
#: src/virterror.c:722
#, fuzzy, c-format
msgid "this function is not supported by the hypervisor: %s"
msgstr "不支援 hypervisor %s"
#: src/virterror.c:726
msgid "could not connect to hypervisor"
msgstr "無法連上 hypervisor"
#: src/virterror.c:728
#, c-format
msgid "could not connect to %s"
msgstr "無法連上 %s"
#: src/virterror.c:732
msgid "invalid connection pointer in"
msgstr "無效的連線指標,於 "
#: src/virterror.c:734
#, c-format
msgid "invalid connection pointer in %s"
msgstr "無效的連線指標,於 %s"
#: src/virterror.c:738
msgid "invalid domain pointer in"
msgstr "無效的區域指標,於 "
#: src/virterror.c:740
#, c-format
msgid "invalid domain pointer in %s"
msgstr "無效的區域指標,於 %s"
#: src/virterror.c:744
msgid "invalid argument in"
msgstr "無效的參數,於 "
#: src/virterror.c:746
#, c-format
msgid "invalid argument in %s"
msgstr "無效的參數,於 %s"
#: src/virterror.c:750
#, c-format
msgid "operation failed: %s"
msgstr "操作失敗:%s"
#: src/virterror.c:752
msgid "operation failed"
msgstr "操作失敗"
#: src/virterror.c:756
#, c-format
msgid "GET operation failed: %s"
msgstr "GET 操作失敗:%s"
#: src/virterror.c:758
msgid "GET operation failed"
msgstr "GET 操作失敗"
#: src/virterror.c:762
#, c-format
msgid "POST operation failed: %s"
msgstr "POST 操作失敗:%s"
#: src/virterror.c:764
msgid "POST operation failed"
msgstr "POST 操作失敗"
#: src/virterror.c:767
#, c-format
msgid "got unknown HTTP error code %d"
msgstr "收到未知的 HTTP 錯誤碼 %d"
#: src/virterror.c:771
#, c-format
msgid "unknown host %s"
msgstr "未知的主機 %s"
#: src/virterror.c:773
msgid "unknown host"
msgstr "未知的主機"
#: src/virterror.c:777
#, c-format
msgid "failed to serialize S-Expr: %s"
msgstr "無法為 S-Expr 製作序列號:%s"
#: src/virterror.c:779
msgid "failed to serialize S-Expr"
msgstr "無法為 S-Expr 製作序列號"
#: src/virterror.c:783
msgid "could not use Xen hypervisor entry"
msgstr "無法使用 Xen hypervisor 項目"
#: src/virterror.c:785
#, c-format
msgid "could not use Xen hypervisor entry %s"
msgstr "無法使用 Xen hypervisor 項目 %s"
#: src/virterror.c:789
msgid "could not connect to Xen Store"
msgstr "無法連上 Xen Store"
#: src/virterror.c:791
#, c-format
msgid "could not connect to Xen Store %s"
msgstr "無法連上 Xen Store %s"
#: src/virterror.c:794
#, fuzzy, c-format
msgid "failed Xen syscall %s"
msgstr "Xen syscall %s %d 失敗"
#: src/virterror.c:798
msgid "unknown OS type"
msgstr "未知的作業系統類型"
#: src/virterror.c:800
#, c-format
msgid "unknown OS type %s"
msgstr "未知的作業系統類型 %s"
#: src/virterror.c:803
msgid "missing kernel information"
msgstr "找不到核心資訊"
#: src/virterror.c:807
msgid "missing root device information"
msgstr "找不到 root 裝置的資訊"
#: src/virterror.c:809
#, c-format
msgid "missing root device information in %s"
msgstr "找不到 root 裝置的資訊,於 %s"
#: src/virterror.c:813
msgid "missing source information for device"
msgstr "找不到裝置的來源資訊"
#: src/virterror.c:815
#, c-format
msgid "missing source information for device %s"
msgstr "找不到裝置 %s 的來源資訊"
#: src/virterror.c:819
msgid "missing target information for device"
msgstr "找不到裝置的目標資訊"
#: src/virterror.c:821
#, c-format
msgid "missing target information for device %s"
msgstr "找不到 %s 裝置的目標資訊"
#: src/virterror.c:825
msgid "missing domain name information"
msgstr "找不到區域名稱的資訊"
#: src/virterror.c:827
#, c-format
msgid "missing domain name information in %s"
msgstr "找不到區域名稱的資訊,於 %s"
#: src/virterror.c:831
msgid "missing operating system information"
msgstr "找不到作業系統資訊"
#: src/virterror.c:833
#, c-format
msgid "missing operating system information for %s"
msgstr "找不到 %s 的作業系統資訊"
#: src/virterror.c:837
msgid "missing devices information"
msgstr "找不到裝置的資訊"
#: src/virterror.c:839
#, c-format
msgid "missing devices information for %s"
msgstr "找不到 %s 的裝置資訊"
#: src/virterror.c:843
msgid "too many drivers registered"
msgstr "註冊太多驅動程式"
#: src/virterror.c:845
#, c-format
msgid "too many drivers registered in %s"
msgstr "在 %s 中註冊太多驅動程式"
#: src/virterror.c:849
msgid "library call failed, possibly not supported"
msgstr "呼叫函式庫失敗,可能並不支援"
#: src/virterror.c:851
#, c-format
msgid "library call %s failed, possibly not supported"
msgstr "呼叫函式庫 %s 失敗,可能並不支援"
#: src/virterror.c:855
msgid "XML description not well formed or invalid"
msgstr "XML 的描述格式有誤"
#: src/virterror.c:857
#, c-format
msgid "XML description for %s is not well formed or invalid"
msgstr "%s 的 XML 描述之格式有誤"
#: src/virterror.c:861
msgid "this domain exists already"
msgstr "這個區域已經存在"
#: src/virterror.c:863
#, c-format
msgid "domain %s exists already"
msgstr "區域 %s 已經存在"
#: src/virterror.c:867
msgid "operation forbidden for read only access"
msgstr "唯讀時,禁止這操作"
#: src/virterror.c:869
#, c-format
msgid "operation %s forbidden for read only access"
msgstr "唯讀時,禁止 %s 操作"
#: src/virterror.c:873
msgid "failed to open configuration file for reading"
msgstr "無法開啟要讀取的設定檔"
#: src/virterror.c:875
#, c-format
msgid "failed to open %s for reading"
msgstr "無法開啟要讀取的 %s"
#: src/virterror.c:879
msgid "failed to read configuration file"
msgstr "無法讀取設定檔"
#: src/virterror.c:881
#, c-format
msgid "failed to read configuration file %s"
msgstr "無法讀取設定檔 %s"
#: src/virterror.c:885
msgid "failed to parse configuration file"
msgstr "無法解析設定檔"
#: src/virterror.c:887
#, c-format
msgid "failed to parse configuration file %s"
msgstr "無法解析設定檔 %s"
#: src/virterror.c:891
msgid "configuration file syntax error"
msgstr "設定檔語法錯誤"
#: src/virterror.c:893
#, c-format
msgid "configuration file syntax error: %s"
msgstr "設定檔語法錯誤:%s"
#: src/virterror.c:897
msgid "failed to write configuration file"
msgstr "無法寫入設定檔"
#: src/virterror.c:899
#, c-format
msgid "failed to write configuration file: %s"
msgstr "無法寫入設定檔:%s"
#: src/virterror.c:903
msgid "parser error"
msgstr "解析程式錯誤"
#: src/virterror.c:909
msgid "invalid network pointer in"
msgstr "無效的網路指標,於 "
#: src/virterror.c:911
#, c-format
msgid "invalid network pointer in %s"
msgstr "無效的網路指標,於 %s"
#: src/virterror.c:915
msgid "this network exists already"
msgstr "這個網路已經存在"
#: src/virterror.c:917
#, c-format
msgid "network %s exists already"
msgstr "網路 %s 已經存在"
#: src/virterror.c:921
msgid "system call error"
msgstr "系統呼叫錯誤"
#: src/virterror.c:927
#, fuzzy
msgid "RPC error"
msgstr "錯誤"
#: src/virterror.c:933
#, fuzzy
msgid "GNUTLS call error"
msgstr "系統呼叫錯誤"
#: src/virterror.c:939
#, fuzzy
msgid "Failed to find the network"
msgstr "無法為網路 %s 取消定義"
#: src/virterror.c:941
#, fuzzy, c-format
msgid "Failed to find the network: %s"
msgstr "無法為網路 %s 取消定義"
#: src/virterror.c:945
#, fuzzy
msgid "Domain not found"
msgstr "區域資訊"
#: src/virterror.c:947
#, fuzzy, c-format
msgid "Domain not found: %s"
msgstr "從 %s 回復區域\n"
#: src/virterror.c:951
#, fuzzy
msgid "Network not found"
msgstr "網路名稱或 uuid"
#: src/virterror.c:953
#, fuzzy, c-format
msgid "Network not found: %s"
msgstr "網路 %s 建立自 %s\n"
#: src/virterror.c:957
#, fuzzy
msgid "invalid MAC address"
msgstr "無效的參數,於 %s"
#: src/virterror.c:959
#, fuzzy, c-format
msgid "invalid MAC address: %s"
msgstr "無效的參數,於 %s"
#: src/virterror.c:963
#, fuzzy
msgid "authentication failed"
msgstr "操作失敗"
#: src/virterror.c:965
#, fuzzy, c-format
msgid "authentication failed: %s"
msgstr "操作失敗:%s"
#: src/virterror.c:969
#, fuzzy
msgid "Storage pool not found"
msgstr "網路名稱或 uuid"
#: src/virterror.c:971
#, fuzzy, c-format
msgid "Storage pool not found: %s"
msgstr "網路 %s 建立自 %s\n"
#: src/virterror.c:975
#, fuzzy
msgid "Storage volume not found"
msgstr "網路名稱或 uuid"
#: src/virterror.c:977
#, fuzzy, c-format
msgid "Storage volume not found: %s"
msgstr "網路 %s 建立自 %s\n"
#: src/virterror.c:981
#, fuzzy
msgid "invalid storage pool pointer in"
msgstr "無效的網路指標,於 "
#: src/virterror.c:983
#, fuzzy, c-format
msgid "invalid storage pool pointer in %s"
msgstr "無效的網路指標,於 %s"
#: src/virterror.c:987
#, fuzzy
msgid "invalid storage volume pointer in"
msgstr "無效的網路指標,於 "
#: src/virterror.c:989
#, fuzzy, c-format
msgid "invalid storage volume pointer in %s"
msgstr "無效的網路指標,於 %s"
#: src/virterror.c:993
#, fuzzy
msgid "Failed to find a storage driver"
msgstr "無法為網路 %s 取消定義"
#: src/virterror.c:995
#, fuzzy, c-format
msgid "Failed to find a storage driver: %s"
msgstr "無法為網路 %s 取消定義"
#: src/virterror.c:999
#, fuzzy
msgid "Failed to find a node driver"
msgstr "無法為網路 %s 取消定義"
#: src/virterror.c:1001
#, fuzzy, c-format
msgid "Failed to find a node driver: %s"
msgstr "無法為網路 %s 取消定義"
#: src/virterror.c:1005
#, fuzzy
msgid "invalid node device pointer"
msgstr "無效的區域指標,於 "
#: src/virterror.c:1007
#, fuzzy, c-format
msgid "invalid node device pointer in %s"
msgstr "無效的區域指標,於 %s"
#: src/virterror.c:1011
#, fuzzy
msgid "Node device not found"
msgstr "區域資訊"
#: src/virterror.c:1013
#, fuzzy, c-format
msgid "Node device not found: %s"
msgstr "從 %s 回復區域\n"
#: src/virterror.c:1017
#, fuzzy
msgid "Security model not found"
msgstr "網路名稱或 uuid"
#: src/virterror.c:1019
#, fuzzy, c-format
msgid "Security model not found: %s"
msgstr "網路 %s 建立自 %s\n"
#: src/virterror.c:1082
#, fuzzy
msgid "internal error: buffer too small"
msgstr "內部錯誤 %s"
#: src/xen_inotify.c:132 src/xen_inotify.c:207
#, c-format
msgid "parsing uuid %s"
msgstr ""
#: src/xen_inotify.c:149
#, c-format
msgid "finding dom for %s"
msgstr ""
#: src/xen_inotify.c:158
msgid "finding dom on config list"
msgstr ""
#: src/xen_inotify.c:243
#, fuzzy
msgid "Error looking up domain"
msgstr "分配區域"
#: src/xen_inotify.c:250 src/xen_inotify.c:343 src/xen_inotify.c:350
msgid "Error adding file to config cache"
msgstr ""
#: src/xen_inotify.c:296
msgid "conn, or private data is NULL"
msgstr ""
#: src/xen_inotify.c:339 src/xen_inotify.c:362
msgid "looking up dom"
msgstr ""
#: src/xen_inotify.c:401
#, fuzzy
msgid "failed to allocate configInfoList"
msgstr "無法分配節點"
#: src/xen_inotify.c:408
#, fuzzy, c-format
msgid "cannot open directory: %s"
msgstr "無法暫停區域 %s"
#: src/xen_inotify.c:426
msgid "Error adding file to config list"
msgstr ""
#: src/xen_inotify.c:435
msgid "initializing inotify"
msgstr ""
#: src/xen_inotify.c:446
#, c-format
msgid "adding watch on %s"
msgstr ""
#: src/xen_internal.c:1299
#, c-format
msgid "Credit scheduler weight parameter (%d) is out of range (1-65535)"
msgstr ""
#: src/xen_internal.c:1309
#, c-format
msgid "Credit scheduler cap parameter (%d) is out of range (0-65535)"
msgstr ""
#: src/xen_internal.c:2549 src/xen_internal.c:2560
#, fuzzy, c-format
msgid "cannot read file %s"
msgstr "無法連上 %s"
#: src/xen_unified.c:271
msgid "cannot initialise mutex"
msgstr ""
#: src/xend_internal.c:127
#, fuzzy
msgid "failed to create a socket"
msgstr "無法分配節點"
#: src/xend_internal.c:150
#, fuzzy
msgid "failed to connect to xend"
msgstr "無法連上 Xen Store"
#: src/xend_internal.c:197 src/xend_internal.c:200
msgid "failed to read from Xen Daemon"
msgstr "無法從 Xen 系統程式讀取"
#: src/xend_internal.c:388
#, fuzzy, c-format
msgid "%d status from xen daemon: %s:%s"
msgstr "無法繼續區域 %s"
#: src/xend_internal.c:439 src/xend_internal.c:442 src/xend_internal.c:450
#, c-format
msgid "xend_post: error from xen daemon: %s"
msgstr ""
#: src/xend_internal.c:845
#, fuzzy, c-format
msgid "unable to connect to '%s:%s'"
msgstr "無法連上 %s"
#: src/xend_internal.c:963
msgid "failed to urlencode the create S-Expr"
msgstr "無法 urlencode 以建立 S-Expr"
#: src/xend_internal.c:1004
msgid "domain information incomplete, missing domid"
msgstr "區域的資訊不全,沒有 domid"
#: src/xend_internal.c:1010
msgid "domain information incorrect domid not numeric"
msgstr "區域的資訊不正確domid 並非數字型態"
#: src/xend_internal.c:1015 src/xend_internal.c:1062
msgid "domain information incomplete, missing uuid"
msgstr "區域的資訊不全,沒有 uuid"
#: src/xend_internal.c:1054 src/xend_internal.c:2319 src/xend_internal.c:2326
msgid "domain information incomplete, missing name"
msgstr "區域的資訊不全,沒有名稱"
#: src/xend_internal.c:1143
#, fuzzy
msgid "domain information incomplete, missing HVM loader"
msgstr "區域的資訊不全,沒有名稱"
#: src/xend_internal.c:1197
#, fuzzy
msgid "domain information incomplete, missing kernel & bootloader"
msgstr "區域的資訊不全,沒有核心"
#: src/xend_internal.c:1261
#, fuzzy
msgid "Unknown char device type"
msgstr "未知的作業系統類型"
#: src/xend_internal.c:1295 src/xend_internal.c:1335 src/xend_internal.c:1351
#: src/xend_internal.c:1489 src/xend_internal.c:1517 src/xend_internal.c:1533
msgid "malformed char device string"
msgstr ""
#: src/xend_internal.c:1462
#, fuzzy, c-format
msgid "unknown chr device type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/xend_internal.c:1624
msgid "domain information incomplete, vbd has no dev"
msgstr "區域的資訊不全vbd 沒有 dev"
#: src/xend_internal.c:1635
msgid "domain information incomplete, vbd has no src"
msgstr "區域的資訊不全vbd 沒有 src"
#: src/xend_internal.c:1644
msgid "cannot parse vbd filename, missing driver name"
msgstr "無法解析 vbd 檔名,找不到驅動程式名稱"
#: src/xend_internal.c:1659
msgid "cannot parse vbd filename, missing driver type"
msgstr "無法解析 vbd 檔名,找不到驅動程式類型"
#: src/xend_internal.c:1815
#, c-format
msgid "malformed mac address '%s'"
msgstr ""
#: src/xend_internal.c:1896
#, fuzzy, c-format
msgid "unexpected sound model %s"
msgstr "無預期的 dict 節點"
#: src/xend_internal.c:2081
#, fuzzy, c-format
msgid "unknown graphics type '%s'"
msgstr "未知的作業系統類型 %s"
#: src/xend_internal.c:2204
#, fuzzy
msgid "missing PCI domain"
msgstr "暫停區域"
#: src/xend_internal.c:2209
#, fuzzy
msgid "missing PCI bus"
msgstr "找不到 \""
#: src/xend_internal.c:2214
#, fuzzy
msgid "missing PCI slot"
msgstr "找不到 \""
#: src/xend_internal.c:2219
#, fuzzy
msgid "missing PCI func"
msgstr "找不到 \""
#: src/xend_internal.c:2225
#, fuzzy, c-format
msgid "cannot parse PCI domain '%s'"
msgstr "無法連上 %s"
#: src/xend_internal.c:2230
#, fuzzy, c-format
msgid "cannot parse PCI bus '%s'"
msgstr "無效的參數,於 %s"
#: src/xend_internal.c:2235
#, fuzzy, c-format
msgid "cannot parse PCI slot '%s'"
msgstr "無法連上 %s"
#: src/xend_internal.c:2240
#, fuzzy, c-format
msgid "cannot parse PCI func '%s'"
msgstr "無法連上 %s"
#: src/xend_internal.c:2306
msgid "domain information incomplete, missing id"
msgstr "區域的資訊不全,沒有 id"
#: src/xend_internal.c:2374
#, fuzzy, c-format
msgid "invalid CPU mask %s"
msgstr "無效的參數,於 %s"
#: src/xend_internal.c:2385 src/xend_internal.c:2395 src/xend_internal.c:2405
#, fuzzy, c-format
msgid "unknown lifecycle type %s"
msgstr "未知的作業系統類型 %s"
#: src/xend_internal.c:2789
#, fuzzy
msgid "topology syntax error"
msgstr "設定檔語法錯誤"
#: src/xend_internal.c:2853
msgid "failed to parse Xend domain information"
msgstr "無法解析 Xend 的區域資訊"
#: src/xend_internal.c:2974 src/xend_internal.c:3001 src/xend_internal.c:3029
#: src/xend_internal.c:3058 src/xend_internal.c:3089 src/xend_internal.c:3164
#: src/xend_internal.c:3201
#, fuzzy, c-format
msgid "Domain %s isn't running."
msgstr "區域還在執行中"
#: src/xend_internal.c:3359
msgid "xenDaemonDomainFetch failed to find this domain"
msgstr ""
#: src/xend_internal.c:4087 src/xend_internal.c:4094
#, fuzzy
msgid "unsupported device type"
msgstr "無預期的 mime 類型"
#: src/xend_internal.c:4199
msgid "xenDaemonGetAutostart failed to find this domain"
msgstr ""
#: src/xend_internal.c:4240
msgid "xenDaemonSetAutostart failed to find this domain"
msgstr ""
#: src/xend_internal.c:4248
#, fuzzy
msgid "unexpected value from on_xend_start"
msgstr "無預期的數值節點"
#: src/xend_internal.c:4259
#, fuzzy
msgid "no memory"
msgstr "節點的記憶體"
#: src/xend_internal.c:4265
#, fuzzy
msgid "sexpr2string failed"
msgstr "操作失敗"
#: src/xend_internal.c:4270
#, fuzzy
msgid "Failed to redefine sexpr"
msgstr "無法為網路 %s 取消定義"
#: src/xend_internal.c:4275
msgid "on_xend_start not present in sexpr"
msgstr ""
#: src/xend_internal.c:4306
#, fuzzy, c-format
msgid "unable to resolve name %s"
msgstr "無法暫停區域 %s"
#: src/xend_internal.c:4342
msgid ""
"xenDaemonDomainMigrate: Xen does not support renaming domains during "
"migration"
msgstr ""
#: src/xend_internal.c:4352
msgid ""
"xenDaemonDomainMigrate: Xen does not support bandwidth limits during "
"migration"
msgstr ""
#: src/xend_internal.c:4364
msgid "xenDaemonDomainMigrate: unsupported flag"
msgstr ""
#: src/xend_internal.c:4377
msgid "xenDaemonDomainMigrate: invalid URI"
msgstr ""
#: src/xend_internal.c:4382
msgid "xenDaemonDomainMigrate: only xenmigr:// migrations are supported by Xen"
msgstr ""
#: src/xend_internal.c:4389
msgid "xenDaemonDomainMigrate: a hostname must be specified in the URI"
msgstr ""
#: src/xend_internal.c:4409
msgid "xenDaemonDomainMigrate: invalid port number"
msgstr ""
#: src/xend_internal.c:4465
#, fuzzy
msgid "failed to parse domain description"
msgstr "無法解析 Xend 的區域資訊"
#: src/xend_internal.c:4471
#, fuzzy
msgid "failed to build sexpr"
msgstr "無法為 S-Expr 製作序列號"
#: src/xend_internal.c:4481
#, c-format
msgid "Failed to create inactive domain %s\n"
msgstr "無法建立非運作中的區域 %s\n"
#: src/xend_internal.c:4637 src/xend_internal.c:4713 src/xend_internal.c:4803
msgid "unsupported in xendConfigVersion < 4"
msgstr ""
#: src/xend_internal.c:4649
#, fuzzy
msgid "node information incomplete, missing scheduler name"
msgstr "區域的資訊不全,沒有名稱"
#: src/xend_internal.c:4655 src/xend_internal.c:4662
msgid "strdup failed"
msgstr ""
#: src/xend_internal.c:4667 src/xend_internal.c:4761 src/xend_internal.c:4873
msgid "Unknown scheduler"
msgstr ""
#: src/xend_internal.c:4726 src/xend_internal.c:4816
#, fuzzy
msgid "Failed to get a scheduler name"
msgstr "無法取得 hypervisor 類型"
#: src/xend_internal.c:4739 src/xend_internal.c:4852
#, fuzzy
msgid "domain information incomplete, missing cpu_weight"
msgstr "區域的資訊不全,沒有 uuid"
#: src/xend_internal.c:4744 src/xend_internal.c:4861
#, fuzzy
msgid "domain information incomplete, missing cpu_cap"
msgstr "區域的資訊不全,沒有 uuid"
#: src/xend_internal.c:4919
msgid "domainBlockPeek is not supported for dom0"
msgstr ""
#: src/xend_internal.c:4940
#, c-format
msgid "%s: invalid path"
msgstr ""
#: src/xend_internal.c:4948
#, fuzzy, c-format
msgid "failed to open for reading: %s"
msgstr "無法開啟要讀取的 %s"
#: src/xend_internal.c:4960
#, fuzzy, c-format
msgid "failed to lseek or read from file: %s"
msgstr "無法讀取設定檔 %s"
#: src/xend_internal.c:5042 src/xend_internal.c:5088
#, fuzzy, c-format
msgid "unexpected graphics type %d"
msgstr "無預期的 mime 類型"
#: src/xend_internal.c:5131
#, fuzzy
msgid "unexpected chr device type"
msgstr "無預期的 mime 類型"
#: src/xend_internal.c:5209
#, c-format
msgid "Cannot directly attach floppy %s"
msgstr ""
#: src/xend_internal.c:5221
#, c-format
msgid "Cannot directly attach CDROM %s"
msgstr ""
#: src/xend_internal.c:5321 src/xm_internal.c:2018
#, c-format
msgid "unsupported network type %d"
msgstr ""
#: src/xend_internal.c:5362 src/xm_internal.c:2006
#, fuzzy, c-format
msgid "network %s is not active"
msgstr "區域還在執行中"
#: src/xend_internal.c:5421 src/xend_internal.c:5469
msgid "managed PCI devices not supported with XenD"
msgstr ""
#: src/xend_internal.c:5576 src/xend_internal.c:5583 src/xend_internal.c:5590
#, fuzzy, c-format
msgid "unexpected lifecycle value %d"
msgstr "無預期的數值節點"
#: src/xend_internal.c:5611
#, fuzzy
msgid "no HVM domain loader"
msgstr "節點的區域清單"
#: src/xend_internal.c:5847
msgid "hotplug of device type not supported"
msgstr ""
#: src/xm_internal.c:148 src/xm_internal.c:179 src/xm_internal.c:184
#: src/xm_internal.c:207
#, c-format
msgid "config value %s was malformed"
msgstr ""
#: src/xm_internal.c:229 src/xm_internal.c:242
#, c-format
msgid "config value %s was missing"
msgstr ""
#: src/xm_internal.c:235
#, c-format
msgid "config value %s was not a string"
msgstr ""
#: src/xm_internal.c:392
#, fuzzy, c-format
msgid "cannot stat: %s"
msgstr "無法暫停區域 %s"
#: src/xm_internal.c:450
msgid "xenXMConfigCacheRefresh: virHashAddEntry"
msgstr ""
#: src/xm_internal.c:489
#, fuzzy
msgid "cannot get time of day"
msgstr "讀取當天的時間"
#: src/xm_internal.c:502
#, fuzzy, c-format
msgid "cannot read directory %s"
msgstr "無法連上 %s"
#: src/xm_internal.c:786
#, fuzzy, c-format
msgid "unexpected value %s for on_poweroff"
msgstr "無預期的數值節點"
#: src/xm_internal.c:794
#, fuzzy, c-format
msgid "unexpected value %s for on_reboot"
msgstr "無預期的數值節點"
#: src/xm_internal.c:802
#, fuzzy, c-format
msgid "unexpected value %s for on_crash"
msgstr "無預期的數值節點"
#: src/xm_internal.c:1641
#, fuzzy
msgid "read only connection"
msgstr "唯讀的連線"
#: src/xm_internal.c:1646
#, fuzzy
msgid "not inactive domain"
msgstr "列出非作用中的區域"
#: src/xm_internal.c:1654
msgid "virHashLookup"
msgstr ""
#: src/xm_internal.c:1659
msgid "can't retrieve config file for domain"
msgstr ""
#: src/xm_internal.c:2264 src/xm_internal.c:2273 src/xm_internal.c:2282
#, fuzzy, c-format
msgid "unexpected lifecycle action %d"
msgstr "無預期的 dict 節點"
#: src/xm_internal.c:2563
msgid "can't retrieve config filename for domain to overwrite"
msgstr ""
#: src/xm_internal.c:2569
msgid "can't retrieve config entry for domain to overwrite"
msgstr ""
#: src/xm_internal.c:2580 src/xm_internal.c:2587
#, fuzzy
msgid "failed to remove old domain from config map"
msgstr "無法從 %s 回復區域"
#: src/xm_internal.c:2596
msgid "config file name is too long"
msgstr ""
#: src/xm_internal.c:2614
#, fuzzy
msgid "unable to get current time"
msgstr "區域目前的記憶體"
#: src/xm_internal.c:2623 src/xm_internal.c:2630
#, fuzzy
msgid "unable to store config file handle"
msgstr "無法讀取設定檔 %s"
#: src/xm_internal.c:2861 src/xm_internal.c:2962
#, fuzzy
msgid "unknown device"
msgstr "未知的作業系統類型"
#: src/xm_internal.c:3020
#, c-format
msgid "cannot check link %s points to config %s"
msgstr ""
#: src/xm_internal.c:3049
#, fuzzy, c-format
msgid "failed to create link %s to %s"
msgstr "無法從 %s 建立區域"
#: src/xm_internal.c:3057
#, fuzzy, c-format
msgid "failed to remove link %s"
msgstr "無法暫停區域 %s"
#: src/xml.c:60
msgid "Invalid parameter to virXPathString()"
msgstr ""
#: src/xml.c:101
#, c-format
msgid "'%s' value longer than %Zd bytes in virXPathStringLimit()"
msgstr ""
#: src/xml.c:131
msgid "Invalid parameter to virXPathNumber()"
msgstr ""
#: src/xml.c:162
#, fuzzy
msgid "Invalid parameter to virXPathLong()"
msgstr "無效的參數,於 "
#: src/xml.c:249 src/xml.c:347
#, fuzzy
msgid "Invalid parameter to virXPathULong()"
msgstr "無效的參數,於 "
#: src/xml.c:405
msgid "Invalid parameter to virXPathBoolean()"
msgstr ""
#: src/xml.c:443
msgid "Invalid parameter to virXPathNode()"
msgstr ""
#: src/xml.c:485
msgid "Invalid parameter to virXPathNodeSet()"
msgstr ""
#: src/xs_internal.c:300
msgid "failed to connect to Xen Store"
msgstr "無法連上 Xen Store"
#: src/xs_internal.c:309
#, fuzzy
msgid "failed to allocate activeDomainList"
msgstr "無法列出運作中的區域"
#: src/xs_internal.c:318
#, fuzzy
msgid "failed to allocate xsWatchList"
msgstr "無法分配節點"
#: src/xs_internal.c:327
msgid "adding watch @releaseDomain"
msgstr ""
#: src/xs_internal.c:336
msgid "adding watch @introduceDomain"
msgstr ""
#: src/xs_internal.c:1118
msgid "watch already tracked"
msgstr ""
#: src/xs_internal.c:1134
#, fuzzy
msgid "reallocating list"
msgstr "分配區域"
#, fuzzy
#~ msgid "failed to chdir into /new on tmpfs"
#~ msgstr "無法為區域 %s 取消定義"
#, fuzzy
#~ msgid "failed to lazily unmount old root"
#~ msgstr "無法暫停區域 %s"
#, fuzzy
#~ msgid "cannot create /dev/"
#~ msgstr "網路名稱"
#, fuzzy
#~ msgid "failed to mount /dev tmpfs"
#~ msgstr "無法為區域 %s 取消定義"
#, fuzzy
#~ msgid "modprobe %s failed: %s"
#~ msgstr "操作失敗:%s"
#, fuzzy
#~ msgid "cannot open '%s'"
#~ msgstr "無法暫停區域 %s"
#, fuzzy
#~ msgid "Failed to parse target from sysfs path %s/%s"
#~ msgstr "無法將區域 %s 存至 %s"
#, fuzzy
#~ msgid "Failed to find device link for lun %d"
#~ msgstr "無法從 %s 建立區域"
#, fuzzy
#~ msgid "missing group element"
#~ msgstr "找不到 root 裝置的資訊"
#, fuzzy
#~ msgid "failed to get sock address %d (%s)"
#~ msgstr "無法將區域 %s 存至 %s"
#, fuzzy
#~ msgid "failed to get peer address %d (%s)"
#~ msgstr "無法取得節點資訊"
#, fuzzy
#~ msgid "failed to create logfile %s: %s"
#~ msgstr "無法寫入設定檔"
#, fuzzy
#~ msgid "Unable to set VM logfile close-on-exec flag: %s"
#~ msgstr "無法關閉插槽 %d\n"
#, fuzzy
#~ msgid "qemudStartup: out of memory\n"
#~ msgstr "記憶體不足"
#, fuzzy
#~ msgid "Unable to close logfile %d: %s\n"
#~ msgstr "無法關閉插槽 %d\n"
#, fuzzy
#~ msgid "allocate buffer"
#~ msgstr "分配新的緩衝區"
#~ msgid "allocating connection"
#~ msgstr "正在分配連線"
#~ msgid "allocating domain"
#~ msgstr "分配區域"
#~ msgid "allocating network"
#~ msgstr "分配網路"
#, fuzzy
#~ msgid "allocating storage pool"
#~ msgstr "分配節點"
#, fuzzy
#~ msgid "allocating storage vol"
#~ msgstr "分配節點"
#, fuzzy
#~ msgid "allocating node dev"
#~ msgstr "分配節點"
#, fuzzy
#~ msgid "copying node dev name"
#~ msgstr "複製節點內容"
#, fuzzy
#~ msgid "failed to allocate space for xmlXPathContext"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "unable to open connection"
#~ msgstr "無法連上 %s"
#, fuzzy
#~ msgid "failed to mount %s at %s for container: %s"
#~ msgstr "無法開啟要讀取的 %s"
#, fuzzy
#~ msgid "clone() failed, %s"
#~ msgstr "操作失敗:%s"
#, fuzzy
#~ msgid "failed to allocate space for VM name string"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "Failed to find user record for uid '%d': %s\n"
#~ msgstr "無法為網路 %s 取消定義"
#, fuzzy
#~ msgid "failed to allocate space for dnsmasq argv"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "failed to allocate space for IP tables support"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "failed to allocate space for network bridge string"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "failed to allocate vncListen"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "failed to allocate vncTLSx509certdir"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "failed to allocate vnc_listen"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "failed to allocate space for tapfds string"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "failed to allocate space for argv string"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "failed to allocate space for status file"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "failed to allocate space for monitor path"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "allocate cpumap"
#~ msgstr "分配新的緩衝區"
#, fuzzy
#~ msgid "Got unexpected pid, damn\n"
#~ msgstr "無預期的 dict 節點"
#, fuzzy
#~ msgid "failed to allocate space for capabilities support"
#~ msgstr "無法取得能力方面的資訊"
#, fuzzy
#~ msgid "failed to allocate space for ostype"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "failed to pause domain"
#~ msgstr "無法暫停區域 %s"
#, fuzzy
#~ msgid "unable to lookup user '%d': %s"
#~ msgstr "無法暫停區域 %s"
#, fuzzy
#~ msgid "struct private_data"
#~ msgstr "分配數值陣列"
#, fuzzy
#~ msgid "invalid header in event firing"
#~ msgstr "無效的參數,於 "
#, fuzzy
#~ msgid "invalid proc in event firing"
#~ msgstr "無效的區域指標,於 "
#~ msgid "failed to allocate a node"
#~ msgstr "無法分配節點"
#~ msgid "failed to copy a string"
#~ msgstr "無法複製字串"
#, fuzzy
#~ msgid "session"
#~ msgstr "顯示版本"
#, fuzzy
#~ msgid "name"
#~ msgstr "名稱"
#, fuzzy
#~ msgid "allocating pvname or vgname"
#~ msgstr "分配數值陣列"
#, fuzzy
#~ msgid "allocating new source"
#~ msgstr "分配網路"
#, fuzzy
#~ msgid "allocating new device"
#~ msgstr "分配節點"
#, fuzzy
#~ msgid "command line"
#~ msgstr "區域名稱"
#, fuzzy
#~ msgid "device"
#~ msgstr "以組絕"
#, fuzzy
#~ msgid "names"
#~ msgstr "名稱"
#~ msgid "allocating %d domain info"
#~ msgstr "分配 %d 區域資訊"
#~ msgid "allocate new buffer"
#~ msgstr "分配新的緩衝區"
#, fuzzy
#~ msgid "gethostbyname failed: %s"
#~ msgstr "操作失敗:%s"
#, fuzzy
#~ msgid "gethostname failed: %s"
#~ msgstr "操作失敗:%s"
#, fuzzy
#~ msgid "failed to strdup hostname: %s"
#~ msgstr "無法取得 hypervisor 類型"
#, fuzzy
#~ msgid "failed to check autostart link %s: %s"
#~ msgstr "無法將區域 %s 存至 %s"
#, fuzzy
#~ msgid "allocate string array size %lu"
#~ msgstr "分配字串陣列"
#, fuzzy
#~ msgid "failed to allocate domids"
#~ msgstr "無法分配節點"
#, fuzzy
#~ msgid "failed to parse topology information"
#~ msgstr "無法解析 Xend 的區域資訊"
#, fuzzy
#~ msgid "domain not found"
#~ msgstr "區域資訊"
#, fuzzy
#~ msgid "network not found"
#~ msgstr "網路名稱或 uuid"
#, fuzzy
#~ msgid "storage_pool not found"
#~ msgstr "網路名稱或 uuid"
#, fuzzy
#~ msgid "storage_vol not found"
#~ msgstr "網路名稱或 uuid"
#, fuzzy
#~ msgid "Invalid Client"
#~ msgstr "無效的參數,於 "
#, fuzzy
#~ msgid "xdr_setpos failed"
#~ msgstr "操作失敗"
#, fuzzy
#~ msgid "out of memory in asprintf\n"
#~ msgstr "記憶體不足"
#, fuzzy
#~ msgid "allocate value"
#~ msgstr "分配數值陣列"
#~ msgid "copying node content"
#~ msgstr "複製節點內容"
#~ msgid "allocate value array"
#~ msgstr "分配數值陣列"
#, fuzzy
#~ msgid "allocate dict"
#~ msgstr "分配新的內文"
#~ msgid "unexpected dict node"
#~ msgstr "無預期的 dict 節點"
#~ msgid "unexpected value node"
#~ msgstr "無預期的數值節點"
#~ msgid "send request"
#~ msgstr "發送要求"
#~ msgid "unexpected mime type"
#~ msgstr "無預期的 mime 類型"
#~ msgid "allocate response"
#~ msgstr "分配回應"
#~ msgid "read response"
#~ msgstr "讀取回應"
#~ msgid "allocate string array"
#~ msgstr "分配字串陣列"
#~ msgid "parse server response failed"
#~ msgstr "無法解析伺服器的回應"
#~ msgid "allocate new context"
#~ msgstr "分配新的內文"
#~ msgid "domain"
#~ msgstr "區域"
#~ msgid "domain memory"
#~ msgstr "區域的記憶體"
#~ msgid "domain current memory"
#~ msgstr "區域目前的記憶體"
#~ msgid "domain vcpus"
#~ msgstr "區域的 vcpus"
#~ msgid "domain reboot behaviour"
#~ msgstr "區域的重新啟動行為"
#~ msgid "domain poweroff behaviour"
#~ msgstr "區域的關機行為"
#~ msgid "domain crash behaviour"
#~ msgstr "區域的當機行為"
#~ msgid "load domain definition file"
#~ msgstr "載入區域定義檔"
#, fuzzy
#~ msgid "network"
#~ msgstr "網路名稱"
#, fuzzy
#~ msgid "network forward"
#~ msgstr "網路名稱"
#, fuzzy
#~ msgid "load network definition file"
#~ msgstr "載入區域定義檔"
#, fuzzy
#~ msgid "Failed to open '%s': read: %s"
#~ msgstr "無法開啟要讀取的 %s"
#~ msgid "failed to exec %s\n"
#~ msgstr "無法執行 %s\n"
#~ msgid "growing buffer"
#~ msgstr "增加中的緩衝區"
#~ msgid "allocate buffer content"
#~ msgstr "分配緩衝區內容"
#~ msgid "file conatining an XML domain description"
#~ msgstr "包含 XML 區域描述的檔案"
#~ msgid "Xen Daemon or Xen Store"
#~ msgstr "Xen Daemon 或 Xen Store"
#~ msgid "file conatining an XML network description"
#~ msgstr "包含 XML 網路描述的檔案"