mirror of
https://gitlab.com/libvirt/libvirt.git
synced 2024-09-08 16:54:49 +00:00
In the past (when both libvirt and firewalld used iptables), if either libvirt's rules *OR* firewalld's rules accepted a packet, it would be accepted. This was because libvirt and firewalld rules were processed during the same kernel hook, and a single ACCEPT result would terminate the rule traversal and cause the packet to be accepted. But now firewalld can use nftables for its backend, while libvirt's firewall rules are still using iptables; iptables rules are still processed, but at a different time during packet processing (i.e. during a different hook) than the firewalld nftables rules. The result is that a packet must be accepted by *BOTH* the libvirt iptables rules *AND* the firewalld nftable rules in order to be accepted. This causes pain because 1) libvirt always adds rules to permit DNS and DHCP (and sometimes TFTP) from guests to the host network's bridge interface. But libvirt's bridges are in firewalld's "default" zone (which is usually the zone called "public"). The public zone allows ssh, but doesn't allow DNS, DHCP, or TFTP. So even though libvirt's rules allow the DHCP and DNS traffic, the firewalld rules (now processed during a different hook) dont, thus guests connected to libvirt's bridges can't acquire an IP address from DHCP, nor can they make DNS queries to the DNS server libvirt has setup on the host. (This could be solved by modifying the default firewalld zone to allow DNS and DHCP, but that would open *all* interfaces in the default zone to those services, which is most likely not what the host's admin wants.) 2) Even though libvirt adds iptables rules to allow forwarded traffic to pass the iptables hook, firewalld's higher level "rich rules" don't yet have the ability to configure the acceptance of forwarded traffic (traffic that is going somewhere beyond the host), so any traffic that needs to be forwarded from guests to the network beyond the host is rejected during the nftables hook by the default zone's "default reject" policy (which rejects all traffic in the zone not specifically allowed by the rules in the zone, whether that traffic is destined to be forwarded or locally received by the host). libvirt can't send "direct" nftables rules (firewalld only supports direct/passthrough rules for iptables), so we can't solve this problem by just sending explicit nftables rules instead of explicit iptables rules (which, if it could be done, would place libvirt's rules in the same hook as firewalld's native rules, and thus eliminate the need for packets to be accepted by both libvirt's and firewalld's own rules). However, we can take advantage of a quirk in firewalld zones that have a default policy of "accept" (meaning any packet that doesn't match a specific rule in the zone will be *accepted*) - this default accept will also accept forwarded traffic (not just traffic destined for the host). Of course we don't want to modify firewalld's default zone in that way, because that would affect the filtering of traffic coming into the host from other interfaces using that zone. Instead, we will create a new zone called "libvirt". The libvirt zone will have a default policy of accept so that forwarded traffic can pass and list specific services that will be allowed into the host from guests (DNS, DHCP, SSH, and TFTP). But the same default accept policy that fixes forwarded traffic also causes *all* traffic from guest to host to be accepted. To close this new hole, the libvirt zone can take advantage of a new feature in firewalld (currently slated for firewalld-0.7.0) - priorities for rich rules - to add a low priority rule that rejects all local traffic (but leaves alone all forwarded traffic). So, our new zone will start with a list of services that are allowed (dhcp, dns, tftp, and ssh to start, but configurable via any firewalld management application, or direct editing of the zone file in /etc/firewalld/zones/libvirt.xml), followed by a low priority <reject/> rule (to reject all other traffic from guest to host), and finally with a default policy of accept (to allow forwarded traffic). This patch only creates the zonefile for the new zone, and implements a configure.ac option to selectively enable/disable installation of the new zone. A separate patch contains the necessary code to actually place bridge interfaces in the libvirt zone. Why do we need a configure option to disable installation of the new libvirt zone? It uses a new firewalld attribute that sets the priority of a rich rule; this feature first appears in firewalld-0.7.0 (unless it has been backported to am earlier firewalld by a downstream maintainer). If the file were installed on a system with firewalld that didn't support rule priorities, firewalld would log an error every time it restarted, causing confusion and lots of extra bug reports. So we add two new configure.ac switches to avoid polluting the system logs with this error on systems that don't support rule priorities - "--with-firewalld-zone" and "--without-firewalld-zone". A package builder can use these to include/exclude the libvirt zone file in the installation. If firewalld is enabled (--with-firewalld), the default is --with-firewalld-zone, but it can be disabled during configure (using --without-firewalld-zone). Targets that are using a firewalld version too old to support the rule priority setting in the libvirt zone file can simply add --without-firewalld-zone to their configure commandline. These switches only affect whether or not the libvirt zone file is *installed* in /usr/lib/firewalld/zones, but have no effect on whether or not libvirt looks for a zone called libvirt and tries to use it. NB: firewalld zones can only be added to the permanent config of firewalld, and won't be loaded/enabled until firewalld is restarted, so at package install/upgrade time we have to restart firewalld. For rpm-based distros, this is done in the libvirt.spec file by calling the %firewalld_restart rpm macro, which is a part of the firewalld-filesystem package. (For distros that don't use rpm packages, the command "firewalld-cmd --reload" will have the same effect). Signed-off-by: Laine Stump <laine@laine.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
1901 lines
57 KiB
RPMSpec
1901 lines
57 KiB
RPMSpec
# -*- rpm-spec -*-
|
|
|
|
# This spec file assumes you are building on a Fedora or RHEL version
|
|
# that's still supported by the vendor. It may work on other distros
|
|
# or versions, but no effort will be made to ensure that going forward.
|
|
%define min_rhel 7
|
|
%define min_fedora 28
|
|
|
|
%if (0%{?fedora} && 0%{?fedora} >= %{min_fedora}) || (0%{?rhel} && 0%{?rhel} >= %{min_rhel})
|
|
%define supported_platform 1
|
|
%else
|
|
%define supported_platform 0
|
|
%endif
|
|
|
|
# Default to skipping autoreconf. Distros can change just this one line
|
|
# (or provide a command-line override) if they backport any patches that
|
|
# touch configure.ac or Makefile.am.
|
|
%{!?enable_autotools:%global enable_autotools 0}
|
|
|
|
# The hypervisor drivers that run in libvirtd
|
|
%define with_qemu 0%{!?_without_qemu:1}
|
|
%define with_lxc 0%{!?_without_lxc:1}
|
|
%define with_libxl 0%{!?_without_libxl:1}
|
|
%define with_vbox 0%{!?_without_vbox:1}
|
|
|
|
%define with_qemu_tcg %{with_qemu}
|
|
|
|
%define qemu_kvm_arches %{ix86} x86_64
|
|
|
|
%if 0%{?fedora}
|
|
%define qemu_kvm_arches %{ix86} x86_64 %{power64} s390x %{arm} aarch64
|
|
%endif
|
|
|
|
%if 0%{?rhel}
|
|
%define with_qemu_tcg 0
|
|
%define qemu_kvm_arches x86_64 %{power64} aarch64 s390x
|
|
%endif
|
|
|
|
%ifarch %{qemu_kvm_arches}
|
|
%define with_qemu_kvm %{with_qemu}
|
|
%else
|
|
%define with_qemu_kvm 0
|
|
%endif
|
|
|
|
%if ! %{with_qemu_tcg} && ! %{with_qemu_kvm}
|
|
%define with_qemu 0
|
|
%endif
|
|
|
|
# Then the hypervisor drivers that run outside libvirtd, in libvirt.so
|
|
%define with_openvz 0%{!?_without_openvz:1}
|
|
%define with_vmware 0%{!?_without_vmware:1}
|
|
%define with_phyp 0%{!?_without_phyp:1}
|
|
%define with_esx 0%{!?_without_esx:1}
|
|
%define with_hyperv 0%{!?_without_hyperv:1}
|
|
|
|
# Then the secondary host drivers, which run inside libvirtd
|
|
%define with_storage_rbd 0%{!?_without_storage_rbd:1}
|
|
%if 0%{?fedora}
|
|
%define with_storage_sheepdog 0%{!?_without_storage_sheepdog:1}
|
|
%else
|
|
%define with_storage_sheepdog 0
|
|
%endif
|
|
%define with_storage_gluster 0%{!?_without_storage_gluster:1}
|
|
%define with_numactl 0%{!?_without_numactl:1}
|
|
|
|
# F25+ has zfs-fuse
|
|
%if 0%{?fedora}
|
|
%define with_storage_zfs 0%{!?_without_storage_zfs:1}
|
|
%else
|
|
%define with_storage_zfs 0
|
|
%endif
|
|
|
|
# We need a recent enough libiscsi (>= 1.18.0)
|
|
%if 0%{?fedora} || 0%{?rhel} > 7
|
|
%define with_storage_iscsi_direct 0%{!?_without_storage_iscsi_direct:1}
|
|
%else
|
|
%define with_storage_iscsi_direct 0
|
|
%endif
|
|
|
|
# A few optional bits off by default, we enable later
|
|
%define with_fuse 0%{!?_without_fuse:0}
|
|
%define with_sanlock 0%{!?_without_sanlock:0}
|
|
%define with_numad 0%{!?_without_numad:0}
|
|
%define with_firewalld 0%{!?_without_firewalld:0}
|
|
%define with_firewalld_zone 0%{!?_without_firewalld_zone:0}
|
|
%define with_libssh2 0%{!?_without_libssh2:0}
|
|
%define with_wireshark 0%{!?_without_wireshark:0}
|
|
%define with_libssh 0%{!?_without_libssh:0}
|
|
%define with_bash_completion 0%{!?_without_bash_completion:0}
|
|
|
|
# Finally set the OS / architecture specific special cases
|
|
|
|
# Xen is available only on i386 x86_64 ia64
|
|
%ifnarch %{ix86} x86_64 ia64
|
|
%define with_libxl 0
|
|
%endif
|
|
|
|
# vbox is available only on i386 x86_64
|
|
%ifnarch %{ix86} x86_64
|
|
%define with_vbox 0
|
|
%endif
|
|
|
|
# Numactl is not available on many non-x86 archs
|
|
%ifarch s390 s390x %{arm} riscv64
|
|
%define with_numactl 0
|
|
%endif
|
|
|
|
# zfs-fuse is not available on some architectures
|
|
%ifarch s390 s390x aarch64 riscv64
|
|
%define with_storage_zfs 0
|
|
%endif
|
|
|
|
# Ceph dropping support for 32-bit hosts
|
|
%if 0%{?fedora} >= 30
|
|
%ifarch %{arm} %{ix86}
|
|
%define with_storage_rbd 0
|
|
%endif
|
|
%endif
|
|
|
|
# RHEL doesn't ship OpenVZ, VBox, PowerHypervisor,
|
|
# VMware, libxenserver (xenapi), libxenlight (Xen 4.1 and newer),
|
|
# or HyperV.
|
|
%if 0%{?rhel}
|
|
%define with_openvz 0
|
|
%define with_vbox 0
|
|
%define with_phyp 0
|
|
%define with_vmware 0
|
|
%define with_xenapi 0
|
|
%define with_libxl 0
|
|
%define with_hyperv 0
|
|
%define with_vz 0
|
|
|
|
%if 0%{?rhel} > 7
|
|
%define with_lxc 0
|
|
%endif
|
|
%endif
|
|
|
|
%define with_firewalld 1
|
|
|
|
%if 0%{?fedora} >= 30 || 0%{?rhel} > 7
|
|
%define with_firewalld_zone 0%{!?_without_firewalld_zone:1}
|
|
%endif
|
|
|
|
|
|
# fuse is used to provide virtualized /proc for LXC
|
|
%if %{with_lxc}
|
|
%define with_fuse 0%{!?_without_fuse:1}
|
|
%endif
|
|
|
|
# Enable sanlock library for lock management with QEMU
|
|
# Sanlock is available only on arches where kvm is available for RHEL
|
|
%if 0%{?fedora}
|
|
%define with_sanlock 0%{!?_without_sanlock:1}
|
|
%endif
|
|
%if 0%{?rhel}
|
|
%ifarch %{qemu_kvm_arches}
|
|
%define with_sanlock 0%{!?_without_sanlock:1}
|
|
%endif
|
|
%endif
|
|
|
|
# Enable libssh2 transport for new enough distros
|
|
%if 0%{?fedora}
|
|
%define with_libssh2 0%{!?_without_libssh2:1}
|
|
%endif
|
|
|
|
# Enable wireshark plugins for all distros shipping libvirt 1.2.2 or newer
|
|
%if 0%{?fedora}
|
|
%define with_wireshark 0%{!?_without_wireshark:1}
|
|
%endif
|
|
%if 0%{?fedora} || 0%{?rhel} > 7
|
|
%define wireshark_plugindir %(pkg-config --variable plugindir wireshark)
|
|
%else
|
|
%define wireshark_plugindir %{_libdir}/wireshark/plugins
|
|
%endif
|
|
|
|
# Enable libssh transport for new enough distros
|
|
%if 0%{?fedora} || 0%{?rhel} > 7
|
|
%define with_libssh 0%{!?_without_libssh:1}
|
|
%endif
|
|
|
|
%define with_bash_completion 0%{!?_without_bash_completion:1}
|
|
|
|
# Use Python 3 when possible, Python 2 otherwise
|
|
%if 0%{?fedora} || 0%{?rhel} > 7
|
|
%define python python3
|
|
%else
|
|
%define python python2
|
|
%endif
|
|
|
|
|
|
%if %{with_qemu} || %{with_lxc}
|
|
# numad is used to manage the CPU and memory placement dynamically,
|
|
# it's not available on many non-x86 architectures.
|
|
%ifnarch s390 s390x %{arm} riscv64
|
|
%define with_numad 0%{!?_without_numad:1}
|
|
%endif
|
|
%endif
|
|
|
|
# Force QEMU to run as non-root
|
|
%define qemu_user qemu
|
|
%define qemu_group qemu
|
|
|
|
|
|
# RHEL releases provide stable tool chains and so it is safe to turn
|
|
# compiler warning into errors without being worried about frequent
|
|
# changes in reported warnings
|
|
%if 0%{?rhel}
|
|
%define enable_werror --enable-werror
|
|
%else
|
|
%define enable_werror --disable-werror
|
|
%endif
|
|
|
|
%if 0%{?rhel} == 7
|
|
%define tls_priority "NORMAL"
|
|
%else
|
|
%define tls_priority "@LIBVIRT,SYSTEM"
|
|
%endif
|
|
|
|
|
|
Summary: Library providing a simple virtualization API
|
|
Name: libvirt
|
|
Version: @VERSION@
|
|
Release: 1%{?dist}
|
|
License: LGPLv2+
|
|
URL: https://libvirt.org/
|
|
|
|
%if %(echo %{version} | grep -q "\.0$"; echo $?) == 1
|
|
%define mainturl stable_updates/
|
|
%endif
|
|
Source: https://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-config-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
|
|
%if %{with_libxl}
|
|
Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
|
|
%endif
|
|
%if %{with_lxc}
|
|
Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
|
|
%endif
|
|
%if %{with_qemu}
|
|
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
|
|
%endif
|
|
# We had UML driver, but we've removed it.
|
|
Obsoletes: libvirt-daemon-driver-uml <= 5.0.0
|
|
Obsoletes: libvirt-daemon-uml <= 5.0.0
|
|
%if %{with_vbox}
|
|
Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
|
|
%endif
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
|
|
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
|
|
Requires: libvirt-client = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
|
|
# All build-time requirements. Run-time requirements are
|
|
# listed against each sub-RPM
|
|
%if 0%{?enable_autotools}
|
|
BuildRequires: autoconf
|
|
BuildRequires: automake
|
|
BuildRequires: gettext-devel
|
|
BuildRequires: libtool
|
|
BuildRequires: /usr/bin/pod2man
|
|
%endif
|
|
BuildRequires: gcc
|
|
BuildRequires: git
|
|
%if 0%{?fedora} || 0%{?rhel} > 7
|
|
BuildRequires: perl-interpreter
|
|
%else
|
|
BuildRequires: perl
|
|
%endif
|
|
BuildRequires: %{python}
|
|
BuildRequires: systemd-units
|
|
%if %{with_libxl}
|
|
BuildRequires: xen-devel
|
|
%endif
|
|
BuildRequires: libxml2-devel
|
|
BuildRequires: libxslt
|
|
BuildRequires: readline-devel
|
|
%if %{with_bash_completion}
|
|
BuildRequires: bash-completion >= 2.0
|
|
%endif
|
|
BuildRequires: ncurses-devel
|
|
BuildRequires: gettext
|
|
BuildRequires: libtasn1-devel
|
|
BuildRequires: gnutls-devel
|
|
BuildRequires: libattr-devel
|
|
# For pool-build probing for existing pools
|
|
BuildRequires: libblkid-devel >= 2.17
|
|
# for augparse, optionally used in testing
|
|
BuildRequires: augeas
|
|
BuildRequires: systemd-devel >= 185
|
|
BuildRequires: libpciaccess-devel >= 0.10.9
|
|
BuildRequires: yajl-devel
|
|
%if %{with_sanlock}
|
|
BuildRequires: sanlock-devel >= 2.4
|
|
%endif
|
|
BuildRequires: libpcap-devel
|
|
BuildRequires: libnl3-devel
|
|
BuildRequires: avahi-devel
|
|
BuildRequires: libselinux-devel
|
|
BuildRequires: dnsmasq >= 2.41
|
|
BuildRequires: iptables
|
|
BuildRequires: radvd
|
|
BuildRequires: ebtables
|
|
BuildRequires: module-init-tools
|
|
BuildRequires: cyrus-sasl-devel
|
|
BuildRequires: polkit >= 0.112
|
|
# For mount/umount in FS driver
|
|
BuildRequires: util-linux
|
|
%if %{with_qemu}
|
|
# For managing ACLs
|
|
BuildRequires: libacl-devel
|
|
# From QEMU RPMs
|
|
BuildRequires: /usr/bin/qemu-img
|
|
%endif
|
|
# For LVM drivers
|
|
BuildRequires: lvm2
|
|
# For pool type=iscsi
|
|
BuildRequires: iscsi-initiator-utils
|
|
%if %{with_storage_iscsi_direct}
|
|
# For pool type=iscsi-direct
|
|
BuildRequires: libiscsi-devel
|
|
%endif
|
|
# For disk driver
|
|
BuildRequires: parted-devel
|
|
# For Multipath support
|
|
BuildRequires: device-mapper-devel
|
|
%if %{with_storage_rbd}
|
|
BuildRequires: librados2-devel
|
|
BuildRequires: librbd1-devel
|
|
%endif
|
|
%if %{with_storage_gluster}
|
|
BuildRequires: glusterfs-api-devel >= 3.4.1
|
|
BuildRequires: glusterfs-devel >= 3.4.1
|
|
%endif
|
|
%if %{with_storage_sheepdog}
|
|
BuildRequires: sheepdog
|
|
%endif
|
|
%if %{with_storage_zfs}
|
|
# Support any conforming implementation of zfs. On stock Fedora
|
|
# this is zfs-fuse, but could be zfsonlinux upstream RPMs
|
|
BuildRequires: /sbin/zfs
|
|
BuildRequires: /sbin/zpool
|
|
%endif
|
|
%if %{with_numactl}
|
|
# For QEMU/LXC numa info
|
|
BuildRequires: numactl-devel
|
|
%endif
|
|
BuildRequires: libcap-ng-devel >= 0.5.0
|
|
%if %{with_fuse}
|
|
BuildRequires: fuse-devel >= 2.8.6
|
|
%endif
|
|
%if %{with_phyp} || %{with_libssh2}
|
|
BuildRequires: libssh2-devel >= 1.3.0
|
|
%endif
|
|
|
|
BuildRequires: netcf-devel >= 0.2.2
|
|
%if %{with_esx}
|
|
BuildRequires: libcurl-devel
|
|
%endif
|
|
%if %{with_hyperv}
|
|
BuildRequires: libwsman-devel >= 2.2.3
|
|
%endif
|
|
BuildRequires: audit-libs-devel
|
|
# we need /usr/sbin/dtrace
|
|
BuildRequires: systemtap-sdt-devel
|
|
|
|
# For mount/umount in FS driver
|
|
BuildRequires: util-linux
|
|
# For showmount in FS driver (netfs discovery)
|
|
BuildRequires: nfs-utils
|
|
|
|
# Communication with the firewall and polkit daemons use DBus
|
|
BuildRequires: dbus-devel
|
|
|
|
# Fedora build root suckage
|
|
BuildRequires: gawk
|
|
|
|
# For storage wiping with different algorithms
|
|
BuildRequires: scrub
|
|
|
|
%if %{with_numad}
|
|
BuildRequires: numad
|
|
%endif
|
|
|
|
%if %{with_wireshark}
|
|
BuildRequires: wireshark-devel >= 2.1.0
|
|
%endif
|
|
|
|
%if %{with_libssh}
|
|
BuildRequires: libssh-devel >= 0.7.0
|
|
%endif
|
|
|
|
%if 0%{?fedora} || 0%{?rhel} > 7
|
|
BuildRequires: rpcgen
|
|
BuildRequires: libtirpc-devel
|
|
%endif
|
|
|
|
%if %{with_firewalld_zone}
|
|
BuildRequires: firewalld-filesystem
|
|
%endif
|
|
|
|
Provides: bundled(gnulib)
|
|
|
|
%description
|
|
Libvirt is a C toolkit to interact with the virtualization capabilities
|
|
of recent versions of Linux (and other OSes). The main package includes
|
|
the libvirtd server exporting the virtualization support.
|
|
|
|
%package docs
|
|
Summary: API reference and website documentation
|
|
|
|
%description docs
|
|
Includes the API reference for the libvirt C library, and a complete
|
|
copy of the libvirt.org website documentation.
|
|
|
|
%package daemon
|
|
Summary: Server side daemon and supporting files for libvirt library
|
|
|
|
# All runtime requirements for the libvirt package (runtime requrements
|
|
# for subpackages are listed later in those subpackages)
|
|
|
|
# The client side, i.e. shared libs are in a subpackage
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
|
|
# for modprobe of pci devices
|
|
Requires: module-init-tools
|
|
|
|
# for /sbin/ip & /sbin/tc
|
|
Requires: iproute
|
|
# tc is provided by iproute-tc since at least Fedora 26
|
|
%if 0%{?fedora} || 0%{?rhel} > 7
|
|
Requires: iproute-tc
|
|
%endif
|
|
|
|
Requires: avahi-libs
|
|
Requires: polkit >= 0.112
|
|
%ifarch %{ix86} x86_64 ia64
|
|
# For virConnectGetSysinfo
|
|
Requires: dmidecode
|
|
%endif
|
|
# For service management
|
|
Requires(post): systemd-units
|
|
Requires(post): systemd-sysv
|
|
Requires(preun): systemd-units
|
|
Requires(postun): systemd-units
|
|
%if %{with_numad}
|
|
Requires: numad
|
|
%endif
|
|
# libvirtd depends on 'messagebus' service
|
|
Requires: dbus
|
|
# For uid creation during pre
|
|
Requires(pre): shadow-utils
|
|
|
|
%description daemon
|
|
Server side daemon required to manage the virtualization capabilities
|
|
of recent versions of Linux. Requires a hypervisor specific sub-RPM
|
|
for specific drivers.
|
|
|
|
%package daemon-config-network
|
|
Summary: Default configuration files for the libvirtd daemon
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
|
|
%description daemon-config-network
|
|
Default configuration files for setting up NAT based networking
|
|
|
|
%package daemon-config-nwfilter
|
|
Summary: Network filter configuration files for the libvirtd daemon
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
|
|
%description daemon-config-nwfilter
|
|
Network filter configuration files for cleaning guest traffic
|
|
|
|
%package daemon-driver-network
|
|
Summary: Network driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: dnsmasq >= 2.41
|
|
Requires: radvd
|
|
Requires: iptables
|
|
|
|
%description daemon-driver-network
|
|
The network driver plugin for the libvirtd daemon, providing
|
|
an implementation of the virtual network APIs using the Linux
|
|
bridge capabilities.
|
|
|
|
|
|
%package daemon-driver-nwfilter
|
|
Summary: Nwfilter driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: iptables
|
|
Requires: ebtables
|
|
|
|
%description daemon-driver-nwfilter
|
|
The nwfilter driver plugin for the libvirtd daemon, providing
|
|
an implementation of the firewall APIs using the ebtables,
|
|
iptables and ip6tables capabilities
|
|
|
|
|
|
%package daemon-driver-nodedev
|
|
Summary: Nodedev driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
# needed for device enumeration
|
|
Requires: systemd >= 185
|
|
|
|
%description daemon-driver-nodedev
|
|
The nodedev driver plugin for the libvirtd daemon, providing
|
|
an implementation of the node device APIs using the udev
|
|
capabilities.
|
|
|
|
|
|
%package daemon-driver-interface
|
|
Summary: Interface driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: netcf-libs >= 0.2.2
|
|
|
|
%description daemon-driver-interface
|
|
The interface driver plugin for the libvirtd daemon, providing
|
|
an implementation of the network interface APIs using the
|
|
netcf library
|
|
|
|
|
|
%package daemon-driver-secret
|
|
Summary: Secret driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
|
|
%description daemon-driver-secret
|
|
The secret driver plugin for the libvirtd daemon, providing
|
|
an implementation of the secret key APIs.
|
|
|
|
%package daemon-driver-storage-core
|
|
Summary: Storage driver plugin including base backends for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: nfs-utils
|
|
# For mkfs
|
|
Requires: util-linux
|
|
%if %{with_qemu}
|
|
# From QEMU RPMs
|
|
Requires: /usr/bin/qemu-img
|
|
%endif
|
|
|
|
%description daemon-driver-storage-core
|
|
The storage driver plugin for the libvirtd daemon, providing
|
|
an implementation of the storage APIs using files, local disks, LVM, SCSI,
|
|
iSCSI, and multipath storage.
|
|
|
|
%package daemon-driver-storage-logical
|
|
Summary: Storage driver plugin for lvm volumes
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: lvm2
|
|
|
|
%description daemon-driver-storage-logical
|
|
The storage driver backend adding implementation of the storage APIs for block
|
|
volumes using lvm.
|
|
|
|
|
|
%package daemon-driver-storage-disk
|
|
Summary: Storage driver plugin for disk
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: parted
|
|
Requires: device-mapper
|
|
|
|
%description daemon-driver-storage-disk
|
|
The storage driver backend adding implementation of the storage APIs for block
|
|
volumes using the host disks.
|
|
|
|
|
|
%package daemon-driver-storage-scsi
|
|
Summary: Storage driver plugin for local scsi devices
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
|
|
%description daemon-driver-storage-scsi
|
|
The storage driver backend adding implementation of the storage APIs for scsi
|
|
host devices.
|
|
|
|
|
|
%package daemon-driver-storage-iscsi
|
|
Summary: Storage driver plugin for iscsi
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: iscsi-initiator-utils
|
|
|
|
%description daemon-driver-storage-iscsi
|
|
The storage driver backend adding implementation of the storage APIs for iscsi
|
|
volumes using the host iscsi stack.
|
|
|
|
|
|
%if %{with_storage_iscsi_direct}
|
|
%package daemon-driver-storage-iscsi-direct
|
|
Summary: Storage driver plugin for iscsi-direct
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: libiscsi
|
|
|
|
%description daemon-driver-storage-iscsi-direct
|
|
The storage driver backend adding implementation of the storage APIs for iscsi
|
|
volumes using libiscsi direct connection.
|
|
%endif
|
|
|
|
|
|
%package daemon-driver-storage-mpath
|
|
Summary: Storage driver plugin for multipath volumes
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: device-mapper
|
|
|
|
%description daemon-driver-storage-mpath
|
|
The storage driver backend adding implementation of the storage APIs for
|
|
multipath storage using device mapper.
|
|
|
|
|
|
%if %{with_storage_gluster}
|
|
%package daemon-driver-storage-gluster
|
|
Summary: Storage driver plugin for gluster
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
%if 0%{?fedora}
|
|
Requires: glusterfs-client >= 2.0.1
|
|
%endif
|
|
%if (0%{?fedora} || 0%{?with_storage_gluster})
|
|
Requires: /usr/sbin/gluster
|
|
%endif
|
|
|
|
%description daemon-driver-storage-gluster
|
|
The storage driver backend adding implementation of the storage APIs for gluster
|
|
volumes using libgfapi.
|
|
%endif
|
|
|
|
|
|
%if %{with_storage_rbd}
|
|
%package daemon-driver-storage-rbd
|
|
Summary: Storage driver plugin for rbd
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
|
|
%description daemon-driver-storage-rbd
|
|
The storage driver backend adding implementation of the storage APIs for rbd
|
|
volumes using the ceph protocol.
|
|
%endif
|
|
|
|
|
|
%if %{with_storage_sheepdog}
|
|
%package daemon-driver-storage-sheepdog
|
|
Summary: Storage driver plugin for sheepdog
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: sheepdog
|
|
|
|
%description daemon-driver-storage-sheepdog
|
|
The storage driver backend adding implementation of the storage APIs for
|
|
sheepdog volumes using.
|
|
%endif
|
|
|
|
|
|
%if %{with_storage_zfs}
|
|
%package daemon-driver-storage-zfs
|
|
Summary: Storage driver plugin for ZFS
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
# Support any conforming implementation of zfs
|
|
Requires: /sbin/zfs
|
|
Requires: /sbin/zpool
|
|
|
|
%description daemon-driver-storage-zfs
|
|
The storage driver backend adding implementation of the storage APIs for
|
|
ZFS volumes.
|
|
%endif
|
|
|
|
|
|
%package daemon-driver-storage
|
|
Summary: Storage driver plugin including all backends for the libvirtd daemon
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release}
|
|
%if %{with_storage_iscsi_direct}
|
|
Requires: libvirt-daemon-driver-storage-iscsi-direct = %{version}-%{release}
|
|
%endif
|
|
%if %{with_storage_gluster}
|
|
Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release}
|
|
%endif
|
|
%if %{with_storage_rbd}
|
|
Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release}
|
|
%endif
|
|
%if %{with_storage_sheepdog}
|
|
Requires: libvirt-daemon-driver-storage-sheepdog = %{version}-%{release}
|
|
%endif
|
|
%if %{with_storage_zfs}
|
|
Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release}
|
|
%endif
|
|
|
|
%description daemon-driver-storage
|
|
The storage driver plugin for the libvirtd daemon, providing
|
|
an implementation of the storage APIs using LVM, iSCSI,
|
|
parted and more.
|
|
|
|
|
|
%if %{with_qemu}
|
|
%package daemon-driver-qemu
|
|
Summary: QEMU driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
# There really is a hard cross-driver dependency here
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: /usr/bin/qemu-img
|
|
# For image compression
|
|
Requires: gzip
|
|
Requires: bzip2
|
|
Requires: lzop
|
|
Requires: xz
|
|
%if 0%{?fedora} || 0%{?rhel} > 7
|
|
Requires: systemd-container
|
|
%endif
|
|
|
|
%description daemon-driver-qemu
|
|
The qemu driver plugin for the libvirtd daemon, providing
|
|
an implementation of the hypervisor driver APIs using
|
|
QEMU
|
|
%endif
|
|
|
|
|
|
%if %{with_lxc}
|
|
%package daemon-driver-lxc
|
|
Summary: LXC driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
# There really is a hard cross-driver dependency here
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
%if 0%{?fedora} || 0%{?rhel} > 7
|
|
Requires: systemd-container
|
|
%endif
|
|
|
|
%description daemon-driver-lxc
|
|
The LXC driver plugin for the libvirtd daemon, providing
|
|
an implementation of the hypervisor driver APIs using
|
|
the Linux kernel
|
|
%endif
|
|
|
|
|
|
%if %{with_vbox}
|
|
%package daemon-driver-vbox
|
|
Summary: VirtualBox driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
|
|
%description daemon-driver-vbox
|
|
The vbox driver plugin for the libvirtd daemon, providing
|
|
an implementation of the hypervisor driver APIs using
|
|
VirtualBox
|
|
%endif
|
|
|
|
|
|
%if %{with_libxl}
|
|
%package daemon-driver-libxl
|
|
Summary: Libxl driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Obsoletes: libvirt-daemon-driver-xen < 4.3.0
|
|
|
|
%description daemon-driver-libxl
|
|
The Libxl driver plugin for the libvirtd daemon, providing
|
|
an implementation of the hypervisor driver APIs using
|
|
Libxl
|
|
%endif
|
|
|
|
|
|
|
|
%if %{with_qemu_tcg}
|
|
%package daemon-qemu
|
|
Summary: Server side daemon & driver required to run QEMU guests
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
|
|
Requires: qemu
|
|
|
|
%description daemon-qemu
|
|
Server side daemon and driver required to manage the virtualization
|
|
capabilities of the QEMU TCG emulators
|
|
%endif
|
|
|
|
|
|
%if %{with_qemu_kvm}
|
|
%package daemon-kvm
|
|
Summary: Server side daemon & driver required to run KVM guests
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
|
|
Requires: qemu-kvm
|
|
|
|
%description daemon-kvm
|
|
Server side daemon and driver required to manage the virtualization
|
|
capabilities of the KVM hypervisor
|
|
%endif
|
|
|
|
|
|
%if %{with_lxc}
|
|
%package daemon-lxc
|
|
Summary: Server side daemon & driver required to run LXC guests
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
|
|
|
|
%description daemon-lxc
|
|
Server side daemon and driver required to manage the virtualization
|
|
capabilities of LXC
|
|
%endif
|
|
|
|
|
|
%if %{with_libxl}
|
|
%package daemon-xen
|
|
Summary: Server side daemon & driver required to run XEN guests
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
%if %{with_libxl}
|
|
Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
|
|
%endif
|
|
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
|
|
Requires: xen
|
|
|
|
%description daemon-xen
|
|
Server side daemon and driver required to manage the virtualization
|
|
capabilities of XEN
|
|
%endif
|
|
|
|
%if %{with_vbox}
|
|
%package daemon-vbox
|
|
Summary: Server side daemon & driver required to run VirtualBox guests
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
|
|
|
|
%description daemon-vbox
|
|
Server side daemon and driver required to manage the virtualization
|
|
capabilities of VirtualBox
|
|
%endif
|
|
|
|
%package client
|
|
Summary: Client side utilities of the libvirt library
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
Requires: readline
|
|
Requires: ncurses
|
|
# Needed by /usr/libexec/libvirt-guests.sh script.
|
|
Requires: gettext
|
|
# Needed by virt-pki-validate script.
|
|
Requires: gnutls-utils
|
|
%if %{with_bash_completion}
|
|
Requires: %{name}-bash-completion = %{version}-%{release}
|
|
%endif
|
|
|
|
%description client
|
|
The client binaries needed to access the virtualization
|
|
capabilities of recent versions of Linux (and other OSes).
|
|
|
|
%package libs
|
|
Summary: Client side libraries
|
|
# So remote clients can access libvirt over SSH tunnel
|
|
# (client invokes 'nc' against the UNIX socket on the server)
|
|
Requires: nc
|
|
Requires: cyrus-sasl
|
|
# Needed by default sasl.conf - no onerous extra deps, since
|
|
# 100's of other things on a system already pull in krb5-libs
|
|
Requires: cyrus-sasl-gssapi
|
|
|
|
%description libs
|
|
Shared libraries for accessing the libvirt daemon.
|
|
|
|
%package admin
|
|
Summary: Set of tools to control libvirt daemon
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
Requires: readline
|
|
%if %{with_bash_completion}
|
|
Requires: %{name}-bash-completion = %{version}-%{release}
|
|
%endif
|
|
|
|
%description admin
|
|
The client side utilities to control the libvirt daemon.
|
|
|
|
%if %{with_bash_completion}
|
|
%package bash-completion
|
|
Summary: Bash completion script
|
|
|
|
%description bash-completion
|
|
Bash completion script stub.
|
|
%endif
|
|
|
|
%if %{with_wireshark}
|
|
%package wireshark
|
|
Summary: Wireshark dissector plugin for libvirt RPC transactions
|
|
Requires: wireshark >= 1.12.6-4
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
|
|
%description wireshark
|
|
Wireshark dissector plugin for better analysis of libvirt RPC traffic.
|
|
%endif
|
|
|
|
%if %{with_lxc}
|
|
%package login-shell
|
|
Summary: Login shell for connecting users to an LXC container
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
|
|
%description login-shell
|
|
Provides the set-uid virt-login-shell binary that is used to
|
|
connect a user to an LXC container when they login, by switching
|
|
namespaces.
|
|
%endif
|
|
|
|
%package devel
|
|
Summary: Libraries, includes, etc. to compile with the libvirt library
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
Requires: pkgconfig
|
|
|
|
%description devel
|
|
Include header files & development libraries for the libvirt C library.
|
|
|
|
%if %{with_sanlock}
|
|
%package lock-sanlock
|
|
Summary: Sanlock lock manager plugin for QEMU driver
|
|
Requires: sanlock >= 2.4
|
|
#for virt-sanlock-cleanup require augeas
|
|
Requires: augeas
|
|
Requires: %{name}-daemon = %{version}-%{release}
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
|
|
%description lock-sanlock
|
|
Includes the Sanlock lock manager plugin for the QEMU
|
|
driver
|
|
%endif
|
|
|
|
%package nss
|
|
Summary: Libvirt plugin for Name Service Switch
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
|
|
%description nss
|
|
Libvirt plugin for NSS for translating domain names into IP addresses.
|
|
|
|
|
|
%prep
|
|
|
|
%autosetup -S git_am
|
|
|
|
%build
|
|
%if ! %{supported_platform}
|
|
echo "This RPM requires either Fedora >= %{min_fedora} or RHEL >= %{min_rhel}"
|
|
exit 1
|
|
%endif
|
|
|
|
%if %{with_qemu}
|
|
%define arg_qemu --with-qemu
|
|
%else
|
|
%define arg_qemu --without-qemu
|
|
%endif
|
|
|
|
%if %{with_openvz}
|
|
%define arg_openvz --with-openvz
|
|
%else
|
|
%define arg_openvz --without-openvz
|
|
%endif
|
|
|
|
%if %{with_lxc}
|
|
%define arg_lxc --with-lxc
|
|
%define arg_login_shell --with-login-shell
|
|
%else
|
|
%define arg_lxc --without-lxc
|
|
%define arg_login_shell --without-login-shell
|
|
%endif
|
|
|
|
%if %{with_vbox}
|
|
%define arg_vbox --with-vbox
|
|
%else
|
|
%define arg_vbox --without-vbox
|
|
%endif
|
|
|
|
%if %{with_libxl}
|
|
%define arg_libxl --with-libxl
|
|
%else
|
|
%define arg_libxl --without-libxl
|
|
%endif
|
|
|
|
%if %{with_phyp}
|
|
%define arg_phyp --with-phyp
|
|
%else
|
|
%define arg_phyp --without-phyp
|
|
%endif
|
|
|
|
%if %{with_esx}
|
|
%define arg_esx --with-esx
|
|
%else
|
|
%define arg_esx --without-esx
|
|
%endif
|
|
|
|
%if %{with_hyperv}
|
|
%define arg_hyperv --with-hyperv
|
|
%else
|
|
%define arg_hyperv --without-hyperv
|
|
%endif
|
|
|
|
%if %{with_vmware}
|
|
%define arg_vmware --with-vmware
|
|
%else
|
|
%define arg_vmware --without-vmware
|
|
%endif
|
|
|
|
%if %{with_storage_rbd}
|
|
%define arg_storage_rbd --with-storage-rbd
|
|
%else
|
|
%define arg_storage_rbd --without-storage-rbd
|
|
%endif
|
|
|
|
%if %{with_storage_sheepdog}
|
|
%define arg_storage_sheepdog --with-storage-sheepdog
|
|
%else
|
|
%define arg_storage_sheepdog --without-storage-sheepdog
|
|
%endif
|
|
|
|
%if %{with_storage_gluster}
|
|
%define arg_storage_gluster --with-storage-gluster
|
|
%else
|
|
%define arg_storage_gluster --without-storage-gluster
|
|
%endif
|
|
|
|
%if %{with_storage_zfs}
|
|
%define arg_storage_zfs --with-storage-zfs
|
|
%else
|
|
%define arg_storage_zfs --without-storage-zfs
|
|
%endif
|
|
|
|
%if %{with_numactl}
|
|
%define arg_numactl --with-numactl
|
|
%else
|
|
%define arg_numactl --without-numactl
|
|
%endif
|
|
|
|
%if %{with_numad}
|
|
%define arg_numad --with-numad
|
|
%else
|
|
%define arg_numad --without-numad
|
|
%endif
|
|
|
|
%if %{with_fuse}
|
|
%define arg_fuse --with-fuse
|
|
%else
|
|
%define arg_fuse --without-fuse
|
|
%endif
|
|
|
|
%if %{with_sanlock}
|
|
%define arg_sanlock --with-sanlock
|
|
%else
|
|
%define arg_sanlock --without-sanlock
|
|
%endif
|
|
|
|
%if %{with_firewalld}
|
|
%define arg_firewalld --with-firewalld
|
|
%else
|
|
%define arg_firewalld --without-firewalld
|
|
%endif
|
|
|
|
%if %{with_firewalld_zone}
|
|
%define arg_firewalld_zone --with-firewalld-zone
|
|
%else
|
|
%define arg_firewalld_zone --without-firewalld-zone
|
|
%endif
|
|
|
|
%if %{with_wireshark}
|
|
%define arg_wireshark --with-wireshark-dissector
|
|
%else
|
|
%define arg_wireshark --without-wireshark-dissector
|
|
%endif
|
|
|
|
%if %{with_storage_iscsi_direct}
|
|
%define arg_storage_iscsi_direct --with-storage-iscsi-direct
|
|
%else
|
|
%define arg_storage_iscsi_direct --without-storage-iscsi-direct
|
|
%endif
|
|
|
|
%define when %(date +"%%F-%%T")
|
|
%define where %(hostname)
|
|
%define who %{?packager}%{!?packager:Unknown}
|
|
%define arg_packager --with-packager="%{who}, %{when}, %{where}"
|
|
%define arg_packager_version --with-packager-version="%{release}"
|
|
|
|
%define arg_selinux_mount --with-selinux-mount="/sys/fs/selinux"
|
|
|
|
%if 0%{?fedora}
|
|
# Nightly edk2.git-ovmf-x64
|
|
LOADERS="/usr/share/edk2.git/ovmf-x64/OVMF_CODE-pure-efi.fd:/usr/share/edk2.git/ovmf-x64/OVMF_VARS-pure-efi.fd"
|
|
# Nightly edk2.git-ovmf-ia32
|
|
LOADERS="$LOADERS:/usr/share/edk2.git/ovmf-ia32/OVMF_CODE-pure-efi.fd:/usr/share/edk2.git/ovmf-ia32/OVMF_VARS-pure-efi.fd"
|
|
# Nightly edk2.git-aarch64
|
|
LOADERS="$LOADERS:/usr/share/edk2.git/aarch64/QEMU_EFI-pflash.raw:/usr/share/edk2.git/aarch64/vars-template-pflash.raw"
|
|
# Nightly edk2.git-arm
|
|
LOADERS="$LOADERS:/usr/share/edk2.git/arm/QEMU_EFI-pflash.raw:/usr/share/edk2.git/arm/vars-template-pflash.raw"
|
|
|
|
# Fedora edk2-ovmf
|
|
LOADERS="$LOADERS:/usr/share/edk2/ovmf/OVMF_CODE.fd:/usr/share/edk2/ovmf/OVMF_VARS.fd"
|
|
# Fedora edk2-ovmf-ia32
|
|
LOADERS="$LOADERS:/usr/share/edk2/ovmf-ia32/OVMF_CODE.fd:/usr/share/edk2/ovmf-ia32/OVMF_VARS.fd"
|
|
# Fedora edk2-aarch64
|
|
LOADERS="$LOADERS:/usr/share/edk2/aarch64/QEMU_EFI-pflash.raw:/usr/share/edk2/aarch64/vars-template-pflash.raw"
|
|
# Fedora edk2-arm
|
|
LOADERS="$LOADERS:/usr/share/edk2/arm/QEMU_EFI-pflash.raw:/usr/share/edk2/arm/vars-template-pflash.raw"
|
|
%define arg_loader_nvram --with-loader-nvram="$LOADERS"
|
|
%endif
|
|
|
|
# place macros above and build commands below this comment
|
|
|
|
export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec)
|
|
|
|
%if 0%{?enable_autotools}
|
|
autoreconf -if
|
|
%endif
|
|
|
|
rm -f po/stamp-po
|
|
%configure %{?arg_qemu} \
|
|
%{?arg_openvz} \
|
|
%{?arg_lxc} \
|
|
%{?arg_vbox} \
|
|
%{?arg_libxl} \
|
|
--with-sasl \
|
|
--with-avahi \
|
|
--with-polkit \
|
|
--with-libvirtd \
|
|
%{?arg_phyp} \
|
|
%{?arg_esx} \
|
|
%{?arg_hyperv} \
|
|
%{?arg_vmware} \
|
|
--without-xenapi \
|
|
--without-vz \
|
|
--without-bhyve \
|
|
--with-interface \
|
|
--with-network \
|
|
--with-storage-fs \
|
|
--with-storage-lvm \
|
|
--with-storage-iscsi \
|
|
%{?arg_storage_iscsi_direct} \
|
|
--with-storage-scsi \
|
|
--with-storage-disk \
|
|
--with-storage-mpath \
|
|
%{?arg_storage_rbd} \
|
|
%{?arg_storage_sheepdog} \
|
|
%{?arg_storage_gluster} \
|
|
%{?arg_storage_zfs} \
|
|
--without-storage-vstorage \
|
|
%{?arg_numactl} \
|
|
%{?arg_numad} \
|
|
--with-capng \
|
|
%{?arg_fuse} \
|
|
--with-netcf \
|
|
--with-selinux \
|
|
%{?arg_selinux_mount} \
|
|
--without-apparmor \
|
|
--without-hal \
|
|
--with-udev \
|
|
--with-yajl \
|
|
%{?arg_sanlock} \
|
|
--with-libpcap \
|
|
--with-macvtap \
|
|
--with-audit \
|
|
--with-dtrace \
|
|
--with-driver-modules \
|
|
%{?arg_firewalld} \
|
|
%{?arg_firewalld_zone} \
|
|
%{?arg_wireshark} \
|
|
--without-pm-utils \
|
|
--with-nss-plugin \
|
|
%{arg_packager} \
|
|
%{arg_packager_version} \
|
|
--with-qemu-user=%{qemu_user} \
|
|
--with-qemu-group=%{qemu_group} \
|
|
--with-tls-priority=%{tls_priority} \
|
|
%{?arg_loader_nvram} \
|
|
%{?enable_werror} \
|
|
--enable-expensive-tests \
|
|
--with-init-script=systemd \
|
|
%{?arg_login_shell}
|
|
make %{?_smp_mflags} V=1
|
|
gzip -9 ChangeLog
|
|
|
|
%install
|
|
rm -fr %{buildroot}
|
|
|
|
export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec)
|
|
|
|
%make_install %{?_smp_mflags} SYSTEMD_UNIT_DIR=%{_unitdir} V=1
|
|
|
|
make %{?_smp_mflags} -C examples distclean V=1
|
|
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.la
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.a
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.la
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.a
|
|
%if %{with_wireshark}
|
|
rm -f $RPM_BUILD_ROOT%{wireshark_plugindir}/libvirt.la
|
|
%endif
|
|
|
|
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
|
|
# We don't want to install /etc/libvirt/qemu/networks in the main %files list
|
|
# because if the admin wants to delete the default network completely, we don't
|
|
# want to end up re-incarnating it on every RPM upgrade.
|
|
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
|
|
cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
|
|
$RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
|
|
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
|
|
rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
|
|
|
|
# nwfilter files are installed in /usr/share/libvirt and copied to /etc in %post
|
|
# to avoid verification errors on changed files in /etc
|
|
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/
|
|
cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \
|
|
$RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/
|
|
# libvirt saves these files with mode 600
|
|
chmod 600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml
|
|
|
|
# Strip auto-generated UUID - we need it generated per-install
|
|
sed -i -e "/<uuid>/d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
|
|
%if ! %{with_qemu}
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
|
|
%endif
|
|
%find_lang %{name}
|
|
|
|
%if ! %{with_sanlock}
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
|
|
%endif
|
|
|
|
%if ! %{with_lxc}
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
|
|
%endif
|
|
|
|
%if ! %{with_qemu}
|
|
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
|
|
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
|
|
%endif
|
|
%if ! %{with_lxc}
|
|
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
|
|
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
|
|
%endif
|
|
%if ! %{with_libxl}
|
|
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf
|
|
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug
|
|
%endif
|
|
|
|
# Copied into libvirt-docs subpackage eventually
|
|
mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} libvirt-docs
|
|
|
|
%ifarch %{power64} s390x x86_64 ia64 alpha sparc64
|
|
mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \
|
|
$RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp
|
|
|
|
%if %{with_qemu}
|
|
mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \
|
|
$RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp
|
|
%endif
|
|
%endif
|
|
|
|
%check
|
|
cd tests
|
|
# These tests don't current work in a mock build root
|
|
for i in nodeinfotest seclabeltest
|
|
do
|
|
rm -f $i
|
|
printf 'int main(void) { return 0; }' > $i.c
|
|
printf '#!/bin/sh\nexit 0\n' > $i
|
|
chmod +x $i
|
|
done
|
|
if ! make %{?_smp_mflags} check VIR_TEST_DEBUG=1
|
|
then
|
|
cat test-suite.log || true
|
|
exit 1
|
|
fi
|
|
|
|
%pre daemon
|
|
# 'libvirt' group is just to allow password-less polkit access to
|
|
# libvirtd. The uid number is irrelevant, so we use dynamic allocation
|
|
# described at the above link.
|
|
getent group libvirt >/dev/null || groupadd -r libvirt
|
|
|
|
exit 0
|
|
|
|
%post daemon
|
|
|
|
%systemd_post virtlockd.socket virtlockd-admin.socket
|
|
%systemd_post virtlogd.socket virtlogd-admin.socket
|
|
%systemd_post libvirtd.service
|
|
|
|
# request daemon restart in posttrans
|
|
mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || :
|
|
touch %{_localstatedir}/lib/rpm-state/libvirt/restart || :
|
|
|
|
%preun daemon
|
|
%systemd_preun libvirtd.service
|
|
%systemd_preun virtlogd.socket virtlogd-admin.socket virtlogd.service
|
|
%systemd_preun virtlockd.socket virtlockd-admin.socket virtlockd.service
|
|
|
|
%postun daemon
|
|
/bin/systemctl daemon-reload >/dev/null 2>&1 || :
|
|
if [ $1 -ge 1 ] ; then
|
|
/bin/systemctl reload-or-try-restart virtlockd.service >/dev/null 2>&1 || :
|
|
/bin/systemctl reload-or-try-restart virtlogd.service >/dev/null 2>&1 || :
|
|
fi
|
|
|
|
# In upgrade scenario we must explicitly enable virtlockd/virtlogd
|
|
# sockets, if libvirtd is already enabled and start them if
|
|
# libvirtd is running, otherwise you'll get failures to start
|
|
# guests
|
|
%triggerpostun daemon -- libvirt-daemon < 1.3.0
|
|
if [ $1 -ge 1 ] ; then
|
|
/bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 &&
|
|
/bin/systemctl enable virtlogd.socket virtlogd-admin.socket || :
|
|
/bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 &&
|
|
/bin/systemctl start virtlogd.socket virtlogd-admin.socket || :
|
|
fi
|
|
|
|
%posttrans daemon
|
|
if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then
|
|
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
|
|
fi
|
|
rm -rf %{_localstatedir}/lib/rpm-state/libvirt || :
|
|
|
|
%post daemon-driver-network
|
|
%if %{with_firewalld}
|
|
%firewalld_reload
|
|
%endif
|
|
|
|
%postun daemon-driver-network
|
|
%if %{with_firewalld}
|
|
%firewalld_reload
|
|
%endif
|
|
|
|
%post daemon-config-network
|
|
if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
|
|
# see if the network used by default network creates a conflict,
|
|
# and try to resolve it
|
|
# NB: 192.168.122.0/24 is used in the default.xml template file;
|
|
# do not modify any of those values here without also modifying
|
|
# them in the template.
|
|
orig_sub=122
|
|
sub=${orig_sub}
|
|
nl='
|
|
'
|
|
routes="${nl}$(ip route show | cut -d' ' -f1)${nl}"
|
|
case ${routes} in
|
|
*"${nl}192.168.${orig_sub}.0/24${nl}"*)
|
|
# there was a match, so we need to look for an unused subnet
|
|
for new_sub in $(seq 124 254); do
|
|
case ${routes} in
|
|
*"${nl}192.168.${new_sub}.0/24${nl}"*)
|
|
;;
|
|
*)
|
|
sub=$new_sub
|
|
break;
|
|
;;
|
|
esac
|
|
done
|
|
;;
|
|
*)
|
|
;;
|
|
esac
|
|
|
|
UUID=`/usr/bin/uuidgen`
|
|
sed -e "s/${orig_sub}/${sub}/g" \
|
|
-e "s,</name>,</name>\n <uuid>$UUID</uuid>," \
|
|
< %{_datadir}/libvirt/networks/default.xml \
|
|
> %{_sysconfdir}/libvirt/qemu/networks/default.xml
|
|
ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
|
|
|
|
# Make sure libvirt picks up the new network defininiton
|
|
mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || :
|
|
touch %{_localstatedir}/lib/rpm-state/libvirt/restart || :
|
|
fi
|
|
|
|
%posttrans daemon-config-network
|
|
if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then
|
|
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
|
|
fi
|
|
rm -rf %{_localstatedir}/lib/rpm-state/libvirt || :
|
|
|
|
%post daemon-config-nwfilter
|
|
cp %{_datadir}/libvirt/nwfilter/*.xml %{_sysconfdir}/libvirt/nwfilter/
|
|
# Make sure libvirt picks up the new nwfilter defininitons
|
|
mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || :
|
|
touch %{_localstatedir}/lib/rpm-state/libvirt/restart || :
|
|
|
|
%posttrans daemon-config-nwfilter
|
|
if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then
|
|
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
|
|
fi
|
|
rm -rf %{_localstatedir}/lib/rpm-state/libvirt || :
|
|
|
|
|
|
%triggerun -- libvirt < 0.9.4
|
|
%{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||:
|
|
|
|
# If the package is allowed to autostart:
|
|
/bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||:
|
|
|
|
# Run these because the SysV package being removed won't do them
|
|
/sbin/chkconfig --del libvirtd >/dev/null 2>&1 || :
|
|
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
|
|
|
|
%if %{with_qemu}
|
|
%pre daemon-driver-qemu
|
|
# We want soft static allocation of well-known ids, as disk images
|
|
# are commonly shared across NFS mounts by id rather than name; see
|
|
# https://fedoraproject.org/wiki/Packaging:UsersAndGroups
|
|
getent group kvm >/dev/null || groupadd -f -g 36 -r kvm
|
|
getent group qemu >/dev/null || groupadd -f -g 107 -r qemu
|
|
if ! getent passwd qemu >/dev/null; then
|
|
if ! getent passwd 107 >/dev/null; then
|
|
useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
|
|
else
|
|
useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
|
|
fi
|
|
fi
|
|
exit 0
|
|
%endif
|
|
|
|
%preun client
|
|
|
|
%systemd_preun libvirt-guests.service
|
|
|
|
%post client
|
|
|
|
/sbin/ldconfig
|
|
%systemd_post libvirt-guests.service
|
|
|
|
%postun client
|
|
|
|
/sbin/ldconfig
|
|
%systemd_postun libvirt-guests.service
|
|
|
|
%triggerun client -- libvirt < 0.9.4
|
|
%{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||:
|
|
|
|
# If the package is allowed to autostart:
|
|
/bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||:
|
|
|
|
# Run this because the SysV package being removed won't do them
|
|
/sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || :
|
|
|
|
%if %{with_sanlock}
|
|
%post lock-sanlock
|
|
if getent group sanlock > /dev/null ; then
|
|
chmod 0770 %{_localstatedir}/lib/libvirt/sanlock
|
|
chown root:sanlock %{_localstatedir}/lib/libvirt/sanlock
|
|
fi
|
|
%endif
|
|
|
|
%if %{with_lxc}
|
|
%pre login-shell
|
|
getent group virtlogin >/dev/null || groupadd -r virtlogin
|
|
exit 0
|
|
%endif
|
|
|
|
%files
|
|
|
|
%files docs
|
|
%doc AUTHORS ChangeLog.gz NEWS README README.md
|
|
%doc libvirt-docs/*
|
|
|
|
# API docs
|
|
%dir %{_datadir}/gtk-doc/html/libvirt/
|
|
%doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
|
|
%doc %{_datadir}/gtk-doc/html/libvirt/*.html
|
|
%doc %{_datadir}/gtk-doc/html/libvirt/*.png
|
|
%doc %{_datadir}/gtk-doc/html/libvirt/*.css
|
|
%doc examples/hellolibvirt
|
|
%doc examples/object-events
|
|
%doc examples/dominfo
|
|
%doc examples/domsuspend
|
|
%doc examples/dommigrate
|
|
%doc examples/openauth
|
|
%doc examples/xml
|
|
%doc examples/rename
|
|
%doc examples/systemtap
|
|
%doc examples/admin
|
|
|
|
|
|
%files daemon
|
|
|
|
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
|
|
|
|
%{_unitdir}/libvirtd.service
|
|
%{_unitdir}/virt-guest-shutdown.target
|
|
%{_unitdir}/virtlogd.service
|
|
%{_unitdir}/virtlogd.socket
|
|
%{_unitdir}/virtlogd-admin.socket
|
|
%{_unitdir}/virtlockd.service
|
|
%{_unitdir}/virtlockd.socket
|
|
%{_unitdir}/virtlockd-admin.socket
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtlogd
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
|
|
%config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf
|
|
%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
|
|
%config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf
|
|
|
|
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
|
|
%dir %{_datadir}/libvirt/
|
|
|
|
%ghost %dir %{_localstatedir}/run/libvirt/
|
|
|
|
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
|
|
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/
|
|
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
|
|
%dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
|
|
|
|
|
|
%dir %attr(0755, root, root) %{_libdir}/libvirt/
|
|
%dir %attr(0755, root, root) %{_libdir}/libvirt/connection-driver/
|
|
%dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver
|
|
%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so
|
|
|
|
%{_datadir}/augeas/lenses/libvirtd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_libvirtd.aug
|
|
%{_datadir}/augeas/lenses/virtlogd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtlogd.aug
|
|
%{_datadir}/augeas/lenses/virtlockd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtlockd.aug
|
|
%{_datadir}/augeas/lenses/libvirt_lockd.aug
|
|
%if %{with_qemu}
|
|
%{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
|
|
%endif
|
|
|
|
%{_datadir}/polkit-1/actions/org.libvirt.unix.policy
|
|
%{_datadir}/polkit-1/actions/org.libvirt.api.policy
|
|
%{_datadir}/polkit-1/rules.d/50-libvirt.rules
|
|
|
|
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
|
|
|
|
%attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
|
|
|
|
%attr(0755, root, root) %{_sbindir}/libvirtd
|
|
%attr(0755, root, root) %{_sbindir}/virtlogd
|
|
%attr(0755, root, root) %{_sbindir}/virtlockd
|
|
|
|
%{_mandir}/man8/libvirtd.8*
|
|
%{_mandir}/man8/virtlogd.8*
|
|
%{_mandir}/man8/virtlockd.8*
|
|
%{_mandir}/man7/virkey*.7*
|
|
|
|
%doc examples/polkit/*.rules
|
|
|
|
%files daemon-config-network
|
|
%dir %{_datadir}/libvirt/networks/
|
|
%{_datadir}/libvirt/networks/default.xml
|
|
|
|
%files daemon-config-nwfilter
|
|
%dir %{_datadir}/libvirt/nwfilter/
|
|
%{_datadir}/libvirt/nwfilter/*.xml
|
|
%ghost %{_sysconfdir}/libvirt/nwfilter/*.xml
|
|
|
|
%files daemon-driver-interface
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so
|
|
|
|
%files daemon-driver-network
|
|
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
|
|
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
|
|
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
|
|
%ghost %dir %{_localstatedir}/run/libvirt/network/
|
|
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
|
|
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
|
|
%attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
|
|
|
|
%if %{with_firewalld_zone}
|
|
%{_prefix}/lib/firewalld/zones/libvirt.xml
|
|
%endif
|
|
|
|
%files daemon-driver-nodedev
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so
|
|
|
|
%files daemon-driver-nwfilter
|
|
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
|
|
%ghost %dir %{_localstatedir}/run/libvirt/network/
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so
|
|
|
|
%files daemon-driver-secret
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so
|
|
|
|
%files daemon-driver-storage
|
|
|
|
%files daemon-driver-storage-core
|
|
%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_fs.so
|
|
%{_libdir}/%{name}/storage-file/libvirt_storage_file_fs.so
|
|
|
|
%files daemon-driver-storage-disk
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_disk.so
|
|
|
|
%files daemon-driver-storage-logical
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_logical.so
|
|
|
|
%files daemon-driver-storage-scsi
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_scsi.so
|
|
|
|
%files daemon-driver-storage-iscsi
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi.so
|
|
|
|
%if %{with_storage_iscsi_direct}
|
|
%files daemon-driver-storage-iscsi-direct
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi-direct.so
|
|
%endif
|
|
|
|
%files daemon-driver-storage-mpath
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_mpath.so
|
|
|
|
%if %{with_storage_gluster}
|
|
%files daemon-driver-storage-gluster
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_gluster.so
|
|
%{_libdir}/%{name}/storage-file/libvirt_storage_file_gluster.so
|
|
%endif
|
|
|
|
%if %{with_storage_rbd}
|
|
%files daemon-driver-storage-rbd
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_rbd.so
|
|
%endif
|
|
|
|
%if %{with_storage_sheepdog}
|
|
%files daemon-driver-storage-sheepdog
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_sheepdog.so
|
|
%endif
|
|
|
|
%if %{with_storage_zfs}
|
|
%files daemon-driver-storage-zfs
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_zfs.so
|
|
%endif
|
|
|
|
%if %{with_qemu}
|
|
%files daemon-driver-qemu
|
|
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
|
|
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
|
|
%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
|
|
%config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
|
|
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
|
|
%ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/
|
|
%dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
|
|
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
|
|
%{_datadir}/augeas/lenses/libvirtd_qemu.aug
|
|
%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
|
|
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/swtpm/
|
|
%dir %attr(0711, root, root) %{_localstatedir}/log/swtpm/libvirt/qemu/
|
|
%endif
|
|
|
|
%if %{with_lxc}
|
|
%files daemon-driver-lxc
|
|
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
|
|
%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
|
|
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
|
|
%ghost %dir %{_localstatedir}/run/libvirt/lxc/
|
|
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
|
|
%{_datadir}/augeas/lenses/libvirtd_lxc.aug
|
|
%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
|
|
%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
|
|
%endif
|
|
|
|
%if %{with_libxl}
|
|
%files daemon-driver-libxl
|
|
%config(noreplace) %{_sysconfdir}/libvirt/libxl.conf
|
|
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl
|
|
%config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf
|
|
%{_datadir}/augeas/lenses/libvirtd_libxl.aug
|
|
%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug
|
|
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
|
|
%ghost %dir %{_localstatedir}/run/libvirt/libxl/
|
|
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
|
|
%endif
|
|
|
|
%if %{with_vbox}
|
|
%files daemon-driver-vbox
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so
|
|
%endif
|
|
|
|
%if %{with_qemu_tcg}
|
|
%files daemon-qemu
|
|
%endif
|
|
|
|
%if %{with_qemu_kvm}
|
|
%files daemon-kvm
|
|
%endif
|
|
|
|
%if %{with_lxc}
|
|
%files daemon-lxc
|
|
%endif
|
|
|
|
%if %{with_libxl}
|
|
%files daemon-xen
|
|
%endif
|
|
|
|
%if %{with_vbox}
|
|
%files daemon-vbox
|
|
%endif
|
|
|
|
%if %{with_sanlock}
|
|
%files lock-sanlock
|
|
%if %{with_qemu}
|
|
%config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
|
|
%endif
|
|
%if %{with_libxl}
|
|
%config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf
|
|
%endif
|
|
%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
|
|
%{_datadir}/augeas/lenses/libvirt_sanlock.aug
|
|
%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
|
|
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/sanlock
|
|
%{_sbindir}/virt-sanlock-cleanup
|
|
%{_mandir}/man8/virt-sanlock-cleanup.8*
|
|
%attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper
|
|
%endif
|
|
|
|
%files client
|
|
%{_mandir}/man1/virsh.1*
|
|
%{_mandir}/man1/virt-xml-validate.1*
|
|
%{_mandir}/man1/virt-pki-validate.1*
|
|
%{_mandir}/man1/virt-host-validate.1*
|
|
%{_bindir}/virsh
|
|
%{_bindir}/virt-xml-validate
|
|
%{_bindir}/virt-pki-validate
|
|
%{_bindir}/virt-host-validate
|
|
|
|
%{_datadir}/systemtap/tapset/libvirt_probes*.stp
|
|
%{_datadir}/systemtap/tapset/libvirt_functions.stp
|
|
%if %{with_qemu}
|
|
%{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
|
|
%endif
|
|
|
|
%if %{with_bash_completion}
|
|
%{_datadir}/bash-completion/completions/virsh
|
|
%endif
|
|
|
|
|
|
%{_unitdir}/libvirt-guests.service
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
|
|
%attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh
|
|
|
|
%files libs -f %{name}.lang
|
|
%license COPYING COPYING.LESSER
|
|
%config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
|
|
%config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf
|
|
%{_libdir}/libvirt.so.*
|
|
%{_libdir}/libvirt-qemu.so.*
|
|
%{_libdir}/libvirt-lxc.so.*
|
|
%{_libdir}/libvirt-admin.so.*
|
|
%dir %{_datadir}/libvirt/
|
|
%dir %{_datadir}/libvirt/schemas/
|
|
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
|
|
|
|
%{_datadir}/libvirt/schemas/basictypes.rng
|
|
%{_datadir}/libvirt/schemas/capability.rng
|
|
%{_datadir}/libvirt/schemas/cputypes.rng
|
|
%{_datadir}/libvirt/schemas/domain.rng
|
|
%{_datadir}/libvirt/schemas/domaincaps.rng
|
|
%{_datadir}/libvirt/schemas/domaincommon.rng
|
|
%{_datadir}/libvirt/schemas/domainsnapshot.rng
|
|
%{_datadir}/libvirt/schemas/interface.rng
|
|
%{_datadir}/libvirt/schemas/network.rng
|
|
%{_datadir}/libvirt/schemas/networkcommon.rng
|
|
%{_datadir}/libvirt/schemas/nodedev.rng
|
|
%{_datadir}/libvirt/schemas/nwfilter.rng
|
|
%{_datadir}/libvirt/schemas/nwfilter_params.rng
|
|
%{_datadir}/libvirt/schemas/nwfilterbinding.rng
|
|
%{_datadir}/libvirt/schemas/secret.rng
|
|
%{_datadir}/libvirt/schemas/storagecommon.rng
|
|
%{_datadir}/libvirt/schemas/storagepool.rng
|
|
%{_datadir}/libvirt/schemas/storagevol.rng
|
|
|
|
%{_datadir}/libvirt/cpu_map/*.xml
|
|
|
|
%{_datadir}/libvirt/test-screenshot.png
|
|
|
|
%files admin
|
|
%{_mandir}/man1/virt-admin.1*
|
|
%{_bindir}/virt-admin
|
|
%if %{with_bash_completion}
|
|
%{_datadir}/bash-completion/completions/virt-admin
|
|
%endif
|
|
|
|
%if %{with_bash_completion}
|
|
%files bash-completion
|
|
%{_datadir}/bash-completion/completions/vsh
|
|
%endif
|
|
|
|
%if %{with_wireshark}
|
|
%files wireshark
|
|
%{wireshark_plugindir}/libvirt.so
|
|
%endif
|
|
|
|
%files nss
|
|
%{_libdir}/libnss_libvirt.so.2
|
|
%{_libdir}/libnss_libvirt_guest.so.2
|
|
|
|
%if %{with_lxc}
|
|
%files login-shell
|
|
%attr(4750, root, virtlogin) %{_bindir}/virt-login-shell
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf
|
|
%{_mandir}/man1/virt-login-shell.1*
|
|
%endif
|
|
|
|
%files devel
|
|
%{_libdir}/libvirt.so
|
|
%{_libdir}/libvirt-admin.so
|
|
%{_libdir}/libvirt-qemu.so
|
|
%{_libdir}/libvirt-lxc.so
|
|
%dir %{_includedir}/libvirt
|
|
%{_includedir}/libvirt/virterror.h
|
|
%{_includedir}/libvirt/libvirt.h
|
|
%{_includedir}/libvirt/libvirt-admin.h
|
|
%{_includedir}/libvirt/libvirt-common.h
|
|
%{_includedir}/libvirt/libvirt-domain.h
|
|
%{_includedir}/libvirt/libvirt-domain-snapshot.h
|
|
%{_includedir}/libvirt/libvirt-event.h
|
|
%{_includedir}/libvirt/libvirt-host.h
|
|
%{_includedir}/libvirt/libvirt-interface.h
|
|
%{_includedir}/libvirt/libvirt-network.h
|
|
%{_includedir}/libvirt/libvirt-nodedev.h
|
|
%{_includedir}/libvirt/libvirt-nwfilter.h
|
|
%{_includedir}/libvirt/libvirt-secret.h
|
|
%{_includedir}/libvirt/libvirt-storage.h
|
|
%{_includedir}/libvirt/libvirt-stream.h
|
|
%{_includedir}/libvirt/libvirt-qemu.h
|
|
%{_includedir}/libvirt/libvirt-lxc.h
|
|
%{_libdir}/pkgconfig/libvirt.pc
|
|
%{_libdir}/pkgconfig/libvirt-admin.pc
|
|
%{_libdir}/pkgconfig/libvirt-qemu.pc
|
|
%{_libdir}/pkgconfig/libvirt-lxc.pc
|
|
|
|
%dir %{_datadir}/libvirt/api/
|
|
%{_datadir}/libvirt/api/libvirt-api.xml
|
|
%{_datadir}/libvirt/api/libvirt-admin-api.xml
|
|
%{_datadir}/libvirt/api/libvirt-qemu-api.xml
|
|
%{_datadir}/libvirt/api/libvirt-lxc-api.xml
|
|
# Needed building python bindings
|
|
%doc docs/libvirt-api.xml
|
|
|
|
|
|
%changelog
|