Daniel P. Berrange b090aa7d55 Introduce a virQEMUDriverConfigPtr object ...

Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.

NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>

2013-02-05 15:49:25 +00:00

..

qemuxml2argv-balloon-device-auto.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-balloon-device-auto.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-balloon-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-balloon-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-bios.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-bios.xml

test: Don't assume VNC is always available

2012-10-22 23:16:11 +08:00

qemuxml2argv-blkdeviotune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-blkdeviotune.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-blkiotune-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-blkiotune-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-blkiotune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-blkiotune.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-cdrom.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-cdrom.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-complex-bootindex.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-complex-bootindex.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-complex.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-complex.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-dev+order.xml

conf: add test for boot dev and order

2012-10-16 12:25:32 +02:00

qemuxml2argv-boot-floppy.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-floppy.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-menu-disable-drive-bootindex.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-menu-disable-drive-bootindex.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-menu-disable-drive.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-menu-disable-drive.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-menu-disable.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-menu-disable.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-menu-enable.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-menu-enable.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-multi.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-multi.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-network.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-network.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-order.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-order.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-bootloader.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-bootloader.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-channel-guestfwd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-guestfwd.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-channel-spicevmc-old.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-spicevmc-old.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-channel-spicevmc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-spicevmc.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-channel-virtio-auto.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-virtio-auto.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-channel-virtio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-virtio.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-clock-france.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-clock-france.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-clock-localtime.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-clock-localtime.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-clock-utc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-clock-utc.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-clock-variable.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-clock-variable.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-console-compat-auto.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-compat-auto.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-console-compat-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-compat-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-console-compat.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-compat.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-console-sclp.args

S390: Enable SCLP Console in QEMU driver

2013-01-08 11:37:52 +01:00

qemuxml2argv-console-sclp.xml

S390: Enable SCLP Console in QEMU driver

2013-01-08 11:37:52 +01:00

qemuxml2argv-console-virtio-many.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-virtio-many.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-console-virtio-s390.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-virtio-s390.xml

S390: Adding testcases for s390

2012-07-11 11:19:05 +02:00

qemuxml2argv-console-virtio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-virtio.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-controller-order.args

tests: Add test for controller order

2012-11-06 10:11:35 +01:00

qemuxml2argv-controller-order.xml

tests: Add test for controller order

2012-11-06 10:11:35 +01:00

qemuxml2argv-cpu-eoi-disabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-eoi-disabled.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-eoi-enabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-eoi-enabled.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-exact1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-exact1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-exact2-nofallback.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-exact2-nofallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-exact2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-exact2.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-fallback.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-fallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-kvmclock.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-host-kvmclock.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-model-fallback.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-host-model-fallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-model-nofallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-model.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-host-model.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-passthrough.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-host-passthrough.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-kvmclock.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-kvmclock.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-minimum1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-minimum1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-minimum2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-minimum2.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-nofallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-numa1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-numa1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-numa2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-numa2.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-qemu-host-passthrough.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-strict1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-strict1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-topology1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-topology1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-topology2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-topology2.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-topology3.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-topology3.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cputune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cputune.xml

Support emulatorpin xml parse.

2012-08-22 15:51:23 +08:00

qemuxml2argv-disk-aio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-aio.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-blockio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-blockio.xml

Rename iolimit to blockio.

2012-09-04 09:14:36 -06:00

qemuxml2argv-disk-cdrom-empty.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-cdrom-empty.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-cdrom-tray-no-device-cap.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-cdrom-tray-no-device-cap.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-cdrom-tray.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-cdrom-tray.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-cdrom.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-cdrom.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-copy_on_read.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-copy_on_read.xml

test: Don't assume VNC is always available

2012-10-22 23:16:11 +08:00

qemuxml2argv-disk-drive-boot-cdrom.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-boot-cdrom.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-boot-disk.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-boot-disk.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-cache-directsync.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-directsync.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-cache-unsafe.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-unsafe.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-cache-v1-none.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v1-none.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-cache-v1-wb.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v1-wb.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-cache-v1-wt.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v1-wt.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-cache-v2-none.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v2-none.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-cache-v2-wb.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v2-wb.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-cache-v2-wt.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v2-wt.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-error-policy-enospace.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-error-policy-enospace.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-error-policy-stop.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-error-policy-stop.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-error-policy-wreport-rignore.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-error-policy-wreport-rignore.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-fat.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-fat.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-fmt-qcow.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-fmt-qcow.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-network-gluster.args

tests: Add tests for gluster protocol based network disks support

2012-11-27 10:19:22 +01:00

qemuxml2argv-disk-drive-network-gluster.xml

tests: Add tests for gluster protocol based network disks support

2012-11-27 10:19:22 +01:00

qemuxml2argv-disk-drive-network-nbd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-network-nbd.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-network-rbd-auth.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-network-rbd-auth.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-network-rbd-ceph-env.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-network-rbd-ceph-env.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-network-rbd-ipv6.args

qemu: escape ipv6 for rbd network disk hosts

2013-01-25 11:48:24 +08:00

qemuxml2argv-disk-drive-network-rbd-ipv6.xml

qemu: escape ipv6 for rbd network disk hosts

2013-01-25 11:48:24 +08:00

qemuxml2argv-disk-drive-network-rbd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-network-rbd.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-network-sheepdog.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-network-sheepdog.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-no-boot.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-no-boot.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-readonly-disk.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-readonly-disk.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-readonly-no-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-readonly-no-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-shared.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-shared.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-floppy-tray-no-device-cap.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-floppy-tray-no-device-cap.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-floppy-tray.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-floppy-tray.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-floppy.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-floppy.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-geometry.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-geometry.xml

qemu: Disk Geometry Override Support

2012-08-21 15:35:48 -06:00

qemuxml2argv-disk-ide-drive-split.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-ide-drive-split.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-ide-wwn.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-ide-wwn.xml

qemu: Use disk wwn in qemu command line

2012-09-18 15:00:01 +08:00

qemuxml2argv-disk-ioeventfd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-ioeventfd.xml

test: Don't assume VNC is always available

2012-10-22 23:16:11 +08:00

qemuxml2argv-disk-many.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-many.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-mirror.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-order.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-order.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-sata-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-sata-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-device-auto.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-device-auto.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-disk-split.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-disk-split.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-disk-vpd-build-error.xml

qemu: Allow the user to specify vendor and product for disk

2012-12-07 16:53:27 +08:00

qemuxml2argv-disk-scsi-disk-vpd.args

qemu: Allow the user to specify vendor and product for disk

2012-12-07 16:53:27 +08:00

qemuxml2argv-disk-scsi-disk-vpd.xml

qemu: Allow the user to specify vendor and product for disk

2012-12-07 16:53:27 +08:00

qemuxml2argv-disk-scsi-disk-wwn.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-disk-wwn.xml

qemu: Use disk wwn in qemu command line

2012-09-18 15:00:01 +08:00

qemuxml2argv-disk-scsi-lun-passthrough-sgio.xml

conf: Parse and format the new XML

2013-01-07 21:38:43 +08:00

qemuxml2argv-disk-scsi-lun-passthrough.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-lun-passthrough.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-virtio-scsi.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-virtio-scsi.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-vscsi.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-vscsi.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-snapshot.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-snapshot.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-transient.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-usb-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-usb-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-usb.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-usb.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-virtio-s390.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-virtio-s390.xml

S390: Adding testcases for s390

2012-07-11 11:19:05 +02:00

qemuxml2argv-disk-virtio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-virtio.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-xenvbd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-xenvbd.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-encrypted-disk.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-encrypted-disk.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-eoi-disabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-eoi-disabled.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-eoi-enabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-eoi-enabled.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-event_idx.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-event_idx.xml

test: Don't assume VNC is always available

2012-10-22 23:16:11 +08:00

qemuxml2argv-floppy-drive-fat.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-floppy-drive-fat.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-fs9p.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-fs9p.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-listen-network2.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-listen-network.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-sdl-fullscreen.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-sdl-fullscreen.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-sdl.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-sdl.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-spice-agentmouse.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-spice-agentmouse.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-spice-compression.args

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-graphics-spice-compression.xml

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-graphics-spice-qxl-vga.args

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-graphics-spice-qxl-vga.xml

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-graphics-spice-timeout.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-spice-timeout.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-graphics-spice-usb-redir.args

domain_conf: add "usbredir" to list of valid spice channels

2012-05-08 09:22:45 -06:00

qemuxml2argv-graphics-spice-usb-redir.xml

domain_conf: add "usbredir" to list of valid spice channels

2012-05-08 09:22:45 -06:00

qemuxml2argv-graphics-spice.args

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-graphics-spice.xml

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-graphics-vnc-sasl.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-vnc-sasl.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-vnc-socket.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-vnc-socket.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-vnc-tls.args

Introduce a virQEMUDriverConfigPtr object

2013-02-05 15:49:25 +00:00

qemuxml2argv-graphics-vnc-tls.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-vnc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-vnc.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-hostdev-pci-address-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hostdev-pci-address-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-hostdev-pci-address.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hostdev-pci-address.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-hostdev-usb-address-device-boot.args

tests: add boot order for host and redirected USB to qemu argv test

2012-11-21 18:43:15 +01:00

qemuxml2argv-hostdev-usb-address-device-boot.xml

tests: add boot order for host and redirected USB to qemu argv test

2012-11-21 18:43:15 +01:00

qemuxml2argv-hostdev-usb-address-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hostdev-usb-address-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-hostdev-usb-address.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hostdev-usb-address.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-hugepages.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hugepages.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-hyperv.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hyperv.xml

qemu: Add support for HyperV Enlightenment feature "relaxed"

2012-10-18 12:22:50 +02:00

qemuxml2argv-input-usbmouse-addr.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-input-usbmouse-addr.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-input-usbmouse.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-input-usbmouse.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-input-usbtablet.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-input-usbtablet.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-input-xen.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-input-xen.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-kvmclock.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-kvmclock.xml

Fix /domain/features setting in qemuParseCommandLine

2012-07-11 09:10:21 +02:00

qemuxml2argv-kvmclock+eoi-disabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-kvmclock+eoi-disabled.xml

fix kvm_pv_eoi with kvmclock

2012-10-08 20:13:55 +02:00

qemuxml2argv-lease.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-lease.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-machine-aliases1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-machine-aliases1.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-machine-aliases2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-machine-aliases2.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-machine-core-off.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-machine-core-off.xml

tests: Add tests for dump-core option

2012-09-20 16:41:07 +02:00

qemuxml2argv-machine-core-on.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-machine-core-on.xml

tests: Add tests for dump-core option

2012-09-20 16:41:07 +02:00

qemuxml2argv-memtune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-memtune.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-metadata.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-metadata.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-migrate.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-migrate.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-minimal-s390.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-minimal-s390.xml

S390: Adding testcases for s390

2012-07-11 11:19:05 +02:00

qemuxml2argv-minimal.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-minimal.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-misc-acpi.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-acpi.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-misc-disable-s3.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-disable-s3.xml

tests: Add tests for qemu S3/S4 state configuration

2012-09-03 09:32:45 +02:00

qemuxml2argv-misc-disable-suspends.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-disable-suspends.xml

tests: Add tests for qemu S3/S4 state configuration

2012-09-03 09:32:45 +02:00

qemuxml2argv-misc-enable-s4.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-enable-s4.xml

tests: Add tests for qemu S3/S4 state configuration

2012-09-03 09:32:45 +02:00

qemuxml2argv-misc-no-reboot.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-no-reboot.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-misc-uuid.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-uuid.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-monitor-json.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-monitor-json.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-multifunction-pci-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-multifunction-pci-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-bandwidth.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-client.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-client.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-eth-ifname.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-eth-ifname.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-eth-names.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-eth-names.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-eth.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-eth.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-hostdev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-hostdev.xml

conf: add <vlan> element to network and domain interface elements

2012-08-15 13:10:57 -04:00

qemuxml2argv-net-mcast.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-mcast.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-openvswitch.xml

conf: add <vlan> element to network and domain interface elements

2012-08-15 13:10:57 -04:00

qemuxml2argv-net-server.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-server.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-user.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-user.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-virtio-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-virtio-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-virtio-netdev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-virtio-netdev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-virtio-network-portgroup.xml

conf: add <vlan> element to network and domain interface elements

2012-08-15 13:10:57 -04:00

qemuxml2argv-net-virtio-s390.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-virtio-s390.xml

S390: Adding testcases for s390

2012-07-11 11:19:05 +02:00

qemuxml2argv-net-virtio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-virtio.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-no-shutdown.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-no-shutdown.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-nographics-vga.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-nographics-vga.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-nographics.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-nographics.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-numad-auto-memory-vcpu-cpuset.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad-auto-memory-vcpu-cpuset.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-numad-auto-memory-vcpu-no-cpuset-and-placement.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad-auto-memory-vcpu-no-cpuset-and-placement.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-numad-auto-vcpu-no-numatune.xml

numad: Set memory policy from numad advisory nodeset

2012-05-08 16:57:32 -06:00

qemuxml2argv-numad-auto-vcpu-static-numatune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad-auto-vcpu-static-numatune.xml

numad: Set memory policy from numad advisory nodeset

2012-05-08 16:57:32 -06:00

qemuxml2argv-numad-static-memory-auto-vcpu.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad-static-memory-auto-vcpu.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-numad-static-vcpu-no-numatune.xml

numad: Set memory policy from numad advisory nodeset

2012-05-08 16:57:32 -06:00

qemuxml2argv-numad.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad.xml

numad: Set memory policy from numad advisory nodeset

2012-05-08 16:57:32 -06:00

qemuxml2argv-numatune-memory.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numatune-memory.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-parallel-parport-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-parallel-parport-chardev.xml

Fix for parallel port passthrough for QEMU

2012-06-04 16:46:23 -06:00

qemuxml2argv-parallel-tcp-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-parallel-tcp-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-parallel-tcp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-parallel-tcp.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-pci-rom.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-pci-rom.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-pseries-basic.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-pseries-basic.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-pseries-vio-address-clash.args

tests: Add qemuxml2argv tests for PPC64 pseries machine

2012-01-13 16:10:43 -07:00

qemuxml2argv-pseries-vio-address-clash.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-pseries-vio-user-assigned.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-pseries-vio-user-assigned.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-pseries-vio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-pseries-vio.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-qemu-ns-no-env.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-qemu-ns-no-env.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-qemu-ns.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-qemu-ns.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-reboot-timeout-disabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-reboot-timeout-disabled.xml

QEMU Tests for reboot-timeout

2012-09-20 16:41:02 +02:00

qemuxml2argv-reboot-timeout-enabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-reboot-timeout-enabled.xml

QEMU Tests for reboot-timeout

2012-09-20 16:41:02 +02:00

qemuxml2argv-restore-v1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-restore-v1.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-restore-v2-fd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-restore-v2-fd.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-restore-v2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-restore-v2.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-seclabel-dynamic-baselabel.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-dynamic-baselabel.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-seclabel-dynamic-override.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-dynamic-override.xml

Multiple security drivers in XML data

2012-08-20 19:13:33 +02:00

qemuxml2argv-seclabel-dynamic.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-dynamic.xml

Multiple security drivers in XML data

2012-08-20 19:13:33 +02:00

qemuxml2argv-seclabel-none.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-none.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-seclabel-static-relabel.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-static-relabel.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-seclabel-static.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-static.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-serial-dev-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-dev-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-dev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-dev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-file-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-file-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-file.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-file.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-many-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-many-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-many.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-many.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-pty-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-pty-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-pty.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-pty.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-target-port-auto.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-tcp-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-tcp-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-tcp-telnet-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-tcp-telnet-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-tcp-telnet.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-tcp-telnet.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-tcp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-tcp.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-udp-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-udp-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-udp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-udp.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-unix-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-unix-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-unix.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-unix.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-vc-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-vc-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-vc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-vc.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-controller.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-controller.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-host-certificates.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-host-certificates.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-host.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-host.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-passthrough-spicevmc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-passthrough-spicevmc.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-passthrough-tcp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-passthrough-tcp.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smbios.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smbios.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smp.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-sound-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-sound-device.xml

tests: add ich6 codec type test to qemuxml2argv-sound-device

2012-05-17 11:43:35 -06:00

qemuxml2argv-sound.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-sound.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb1-usb2.args

qemu: make PCI multifunction support more manual

2011-10-01 11:48:28 -04:00

qemuxml2argv-usb1-usb2.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-controller.args

Default USB device is on slot 1 function 2

2011-09-05 15:03:27 +08:00

qemuxml2argv-usb-controller.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-hub.args

Default USB device is on slot 1 function 2

2011-09-05 15:03:27 +08:00

qemuxml2argv-usb-hub.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-ich9-companion.args

qemu: make PCI multifunction support more manual

2011-10-01 11:48:28 -04:00

qemuxml2argv-usb-ich9-companion.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-ich9-ehci-addr.args

Fix logic for assigning PCI addresses to USB2 companion controllers

2012-05-15 17:07:34 +01:00

qemuxml2argv-usb-ich9-ehci-addr.xml

Set a sensible default master start port for ehci companion controllers

2012-05-15 17:07:34 +01:00

qemuxml2argv-usb-none-hub.xml

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-none-other.xml

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-none-usbtablet.xml

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-none.args

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-none.xml

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-piix3-controller.args

qemu: make PCI multifunction support more manual

2011-10-01 11:48:28 -04:00

qemuxml2argv-usb-piix3-controller.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-ports.args

Default USB device is on slot 1 function 2

2011-09-05 15:03:27 +08:00

qemuxml2argv-usb-ports.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-redir-boot.args

tests: add boot order for host and redirected USB to qemu argv test

2012-11-21 18:43:15 +01:00

qemuxml2argv-usb-redir-boot.xml

tests: add boot order for host and redirected USB to qemu argv test

2012-11-21 18:43:15 +01:00

qemuxml2argv-usb-redir-filter.args

test: add xml2argvtest for usb-redir filter and update xml schema

2012-09-13 17:22:37 +08:00

qemuxml2argv-usb-redir-filter.xml

test: add xml2argvtest for usb-redir filter and update xml schema

2012-09-13 17:22:37 +08:00

qemuxml2argv-usb-redir.args

qemu: make PCI multifunction support more manual

2011-10-01 11:48:28 -04:00

qemuxml2argv-usb-redir.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-video-device-pciaddr-default.args

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-video-device-pciaddr-default.xml

tests: add one -device video device testcase

2012-12-17 14:02:58 +08:00

qemuxml2argv-virtio-lun.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-virtio-lun.xml

test: Don't assume VNC is always available

2012-10-22 23:16:11 +08:00

qemuxml2argv-watchdog-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-watchdog-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-watchdog-dump.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-watchdog-dump.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-watchdog.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-watchdog.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00