Martin Kletzander a553dbedb8 Fix usb master startport parsing ...

When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose).  Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.

2013-04-25 14:54:46 +02:00

..

qemuxml2argv-balloon-device-auto.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-balloon-device-auto.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-balloon-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-balloon-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-bios.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-bios.xml

test: Don't assume VNC is always available

2012-10-22 23:16:11 +08:00

qemuxml2argv-blkdeviotune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-blkdeviotune.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-blkiotune-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-blkiotune-device.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-blkiotune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-blkiotune.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-boot-cdrom.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-cdrom.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-boot-complex-bootindex.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-complex-bootindex.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-complex.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-complex.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-dev+order.xml

conf: add test for boot dev and order

2012-10-16 12:25:32 +02:00

qemuxml2argv-boot-floppy.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-floppy.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-boot-menu-disable-drive-bootindex.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-menu-disable-drive-bootindex.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-menu-disable-drive.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-menu-disable-drive.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-menu-disable.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-menu-disable.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-boot-menu-enable.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-menu-enable.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-boot-multi.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-multi.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-boot-network.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-network.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-boot-order.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-boot-order.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-bootloader.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-bootloader.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-channel-guestfwd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-guestfwd.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-channel-spicevmc-old.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-spicevmc-old.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-channel-spicevmc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-spicevmc.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-channel-virtio-auto.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-virtio-auto.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-channel-virtio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-channel-virtio.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-clock-france.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-clock-france.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-clock-localtime.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-clock-localtime.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-clock-utc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-clock-utc.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-clock-variable.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-clock-variable.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-console-compat-auto.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-compat-auto.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-console-compat-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-compat-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-console-compat.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-compat.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-console-sclp.args

S390: Enable SCLP Console in QEMU driver

2013-01-08 11:37:52 +01:00

qemuxml2argv-console-sclp.xml

S390: Enable SCLP Console in QEMU driver

2013-01-08 11:37:52 +01:00

qemuxml2argv-console-virtio-ccw.args

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-console-virtio-ccw.xml

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-console-virtio-many.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-virtio-many.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-console-virtio-s390.args

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-console-virtio-s390.xml

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-console-virtio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-console-virtio.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-controller-order.args

qemu: Improve handling of channels when generating SPICE command line

2013-04-24 14:37:57 +02:00

qemuxml2argv-controller-order.xml

tests: Add test for controller order

2012-11-06 10:11:35 +01:00

qemuxml2argv-cpu-eoi-disabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-eoi-disabled.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-cpu-eoi-enabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-eoi-enabled.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-cpu-exact1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-exact1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-exact2-nofallback.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-exact2-nofallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-exact2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-exact2.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-fallback.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-fallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-kvmclock.args

qemu: Move -enable-kvm and friends earlier in the command line

2013-04-23 21:19:35 +02:00

qemuxml2argv-cpu-host-kvmclock.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-cpu-host-model-fallback.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-host-model-fallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-model-nofallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-model.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-host-model.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-host-passthrough.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-host-passthrough.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-kvmclock.args

qemu: Move -enable-kvm and friends earlier in the command line

2013-04-23 21:19:35 +02:00

qemuxml2argv-cpu-kvmclock.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-cpu-minimum1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-minimum1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-minimum2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-minimum2.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-nofallback.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-numa1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-numa1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-numa2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-numa2.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-qemu-host-passthrough.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-strict1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-strict1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-topology1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-topology1.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-topology2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-topology2.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cpu-topology3.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cpu-topology3.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-cputune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-cputune.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-aio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-aio.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-blockio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-blockio.xml

Rename iolimit to blockio.

2012-09-04 09:14:36 -06:00

qemuxml2argv-disk-cdrom-empty.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-cdrom-empty.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-cdrom-tray-no-device-cap.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-cdrom-tray-no-device-cap.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-cdrom-tray.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-cdrom-tray.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-cdrom.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-cdrom.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-copy_on_read.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-copy_on_read.xml

test: Don't assume VNC is always available

2012-10-22 23:16:11 +08:00

qemuxml2argv-disk-drive-boot-cdrom.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-boot-cdrom.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-boot-disk.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-boot-disk.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-directsync.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-directsync.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-unsafe.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-unsafe.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-v1-none.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v1-none.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-v1-wb.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v1-wb.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-v1-wt.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v1-wt.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-v2-none.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v2-none.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-v2-wb.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v2-wb.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-cache-v2-wt.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-cache-v2-wt.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-error-policy-enospace.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-error-policy-enospace.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-error-policy-stop.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-error-policy-stop.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-error-policy-wreport-rignore.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-error-policy-wreport-rignore.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-fat.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-fat.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-fmt-qcow.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-fmt-qcow.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-gluster.args

qemu: add support for libiscsi

2013-03-22 12:10:22 +08:00

qemuxml2argv-disk-drive-network-gluster.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-iscsi-auth.args

qemu: pass iscsi authorization credentials

2013-03-22 12:10:23 +08:00

qemuxml2argv-disk-drive-network-iscsi-auth.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-iscsi-lun.args

qemu: support passthrough for iscsi disks

2013-03-22 12:10:23 +08:00

qemuxml2argv-disk-drive-network-iscsi-lun.xml

qemu: support passthrough for iscsi disks

2013-03-22 12:10:23 +08:00

qemuxml2argv-disk-drive-network-iscsi.args

qemu: add support for libiscsi

2013-03-22 12:10:22 +08:00

qemuxml2argv-disk-drive-network-iscsi.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-nbd-export.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-nbd-export.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-nbd-ipv6-export.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-nbd-ipv6-export.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-nbd-ipv6.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-nbd-ipv6.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-nbd-unix.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-nbd-unix.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-nbd.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-nbd.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-rbd-auth.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-rbd-auth.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-network-rbd-ceph-env.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-network-rbd-ceph-env.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-rbd-ipv6.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-rbd-ipv6.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-rbd.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-rbd.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-network-sheepdog.args

virCaps: get rid of defaultDiskDriverType

2013-04-04 22:42:38 +02:00

qemuxml2argv-disk-drive-network-sheepdog.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-drive-no-boot.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-no-boot.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-readonly-disk.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-readonly-disk.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-readonly-no-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-readonly-no-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-drive-shared.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-drive-shared.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-floppy-tray-no-device-cap.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-floppy-tray-no-device-cap.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-floppy-tray.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-floppy-tray.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-floppy.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-floppy.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-geometry.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-geometry.xml

qemu: Disk Geometry Override Support

2012-08-21 15:35:48 -06:00

qemuxml2argv-disk-ide-drive-split.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-ide-drive-split.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-ide-wwn.args

qemu: Allow the disk wwn to have "0x" prefix

2013-04-17 23:05:56 +08:00

qemuxml2argv-disk-ide-wwn.xml

qemu: Use disk wwn in qemu command line

2012-09-18 15:00:01 +08:00

qemuxml2argv-disk-ioeventfd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-ioeventfd.xml

test: Don't assume VNC is always available

2012-10-22 23:16:11 +08:00

qemuxml2argv-disk-many.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-many.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-mirror.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-order.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-order.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-sata-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-sata-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-device-auto.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-device-auto.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-device.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-scsi-disk-split.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-disk-split.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-disk-vpd-build-error.xml

qemu: Allow the user to specify vendor and product for disk

2012-12-07 16:53:27 +08:00

qemuxml2argv-disk-scsi-disk-vpd.args

qemu: Allow the user to specify vendor and product for disk

2012-12-07 16:53:27 +08:00

qemuxml2argv-disk-scsi-disk-vpd.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-scsi-disk-wwn.args

qemu: Allow the disk wwn to have "0x" prefix

2013-04-17 23:05:56 +08:00

qemuxml2argv-disk-scsi-disk-wwn.xml

qemu: Allow the disk wwn to have "0x" prefix

2013-04-17 23:05:56 +08:00

qemuxml2argv-disk-scsi-lun-passthrough-sgio.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-scsi-lun-passthrough.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-lun-passthrough.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-scsi-megasas.args

qemu: add support for LSI MegaRAID SAS1078 (aka megasas) SCSI controller

2013-03-22 12:11:14 +08:00

qemuxml2argv-disk-scsi-megasas.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-scsi-virtio-scsi.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-virtio-scsi.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-scsi-vscsi.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-scsi-vscsi.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-snapshot.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-snapshot.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-source-pool.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-transient.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-usb-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-usb-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-disk-usb.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-usb.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-virtio-ccw-many.args

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-disk-virtio-ccw-many.xml

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-disk-virtio-ccw.args

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-disk-virtio-ccw.xml

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-disk-virtio-s390.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-virtio-s390.xml

S390: Adding testcases for s390

2012-07-11 11:19:05 +02:00

qemuxml2argv-disk-virtio-scsi-ccw.args

S390: Testcases for virtio-scsi and virtio-rng

2013-03-14 15:53:20 -06:00

qemuxml2argv-disk-virtio-scsi-ccw.xml

S390: Testcases for virtio-scsi and virtio-rng

2013-03-14 15:53:20 -06:00

qemuxml2argv-disk-virtio-scsi-num_queues.args

qemu: Support multiple queue virtio-scsi

2013-04-06 10:08:47 +08:00

qemuxml2argv-disk-virtio-scsi-num_queues.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-virtio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-virtio.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-disk-xenvbd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-disk-xenvbd.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-encrypted-disk.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-encrypted-disk.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-eoi-disabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-eoi-disabled.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-eoi-enabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-eoi-enabled.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-event_idx.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-event_idx.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-floppy-drive-fat.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-floppy-drive-fat.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-fs9p.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-fs9p.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-listen-network2.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-listen-network.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-sdl-fullscreen.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-sdl-fullscreen.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-sdl.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-sdl.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-spice-agentmouse.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-spice-agentmouse.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-graphics-spice-compression.args

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-graphics-spice-compression.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-spice-qxl-vga.args

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-graphics-spice-qxl-vga.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-spice-timeout.args

qemu: Improve handling of channels when generating SPICE command line

2013-04-24 14:37:57 +02:00

qemuxml2argv-graphics-spice-timeout.xml

Remove probing of CPU models when launching QEMU guests

2012-09-27 10:24:52 +01:00

qemuxml2argv-graphics-spice-usb-redir.args

domain_conf: add "usbredir" to list of valid spice channels

2012-05-08 09:22:45 -06:00

qemuxml2argv-graphics-spice-usb-redir.xml

domain_conf: add "usbredir" to list of valid spice channels

2012-05-08 09:22:45 -06:00

qemuxml2argv-graphics-spice.args

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-graphics-spice.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-vnc-sasl.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-vnc-sasl.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-vnc-socket.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-vnc-socket.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-vnc-tls.args

Introduce a virQEMUDriverConfigPtr object

2013-02-05 15:49:25 +00:00

qemuxml2argv-graphics-vnc-tls.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-graphics-vnc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-graphics-vnc.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-hostdev-pci-address-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hostdev-pci-address-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-hostdev-pci-address.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hostdev-pci-address.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-hostdev-usb-address-device-boot.args

tests: add boot order for host and redirected USB to qemu argv test

2012-11-21 18:43:15 +01:00

qemuxml2argv-hostdev-usb-address-device-boot.xml

tests: add boot order for host and redirected USB to qemu argv test

2012-11-21 18:43:15 +01:00

qemuxml2argv-hostdev-usb-address-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hostdev-usb-address-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-hostdev-usb-address.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hostdev-usb-address.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-hugepages.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hugepages.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-hyperv.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-hyperv.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-input-usbmouse-addr.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-input-usbmouse-addr.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-input-usbmouse.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-input-usbmouse.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-input-usbtablet.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-input-usbtablet.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-input-xen.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-input-xen.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-kvm.args

qemu: Use -machine accel=tcg|kvm when available

2013-04-23 21:19:35 +02:00

qemuxml2argv-kvm.xml

qemu: Use -machine accel=tcg|kvm when available

2013-04-23 21:19:35 +02:00

qemuxml2argv-kvmclock.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-kvmclock.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-kvmclock+eoi-disabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-kvmclock+eoi-disabled.xml

fix kvm_pv_eoi with kvmclock

2012-10-08 20:13:55 +02:00

qemuxml2argv-lease.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-lease.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-machine-aliases1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-machine-aliases1.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-machine-aliases2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-machine-aliases2.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-machine-core-off.args

qemu: Use -machine accel=tcg|kvm when available

2013-04-23 21:19:35 +02:00

qemuxml2argv-machine-core-off.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-machine-core-on.args

qemu: Use -machine accel=tcg|kvm when available

2013-04-23 21:19:35 +02:00

qemuxml2argv-machine-core-on.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-machine-usb-opt.args

qemu: Use -machine accel=tcg|kvm when available

2013-04-23 21:19:35 +02:00

qemuxml2argv-machine-usb-opt.xml

Add USB option capability

2013-04-12 10:56:03 +01:00

qemuxml2argv-memtune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-memtune.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-metadata.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-metadata.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-migrate.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-migrate.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-minimal-s390.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-minimal-s390.xml

S390: Adding testcases for s390

2012-07-11 11:19:05 +02:00

qemuxml2argv-minimal.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-minimal.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-misc-acpi.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-acpi.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-misc-disable-s3.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-disable-s3.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-misc-disable-suspends.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-disable-suspends.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-misc-enable-s4.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-enable-s4.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-misc-no-reboot.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-no-reboot.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-misc-uuid.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-misc-uuid.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-monitor-json.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-monitor-json.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-multifunction-pci-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-multifunction-pci-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-bandwidth.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-client.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-client.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-eth-ifname.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-eth-ifname.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-eth-names.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-eth-names.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-eth.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-eth.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-hostdev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-hostdev.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-mcast.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-mcast.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-openvswitch.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-server.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-server.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-user.args

qemu: Record the default NIC model in the domain XML

2013-04-04 22:41:20 +02:00

qemuxml2argv-net-user.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-virtio-ccw.args

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-net-virtio-ccw.xml

S390: Testcases for virtio-ccw machines

2013-03-13 18:21:50 -06:00

qemuxml2argv-net-virtio-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-virtio-device.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-virtio-netdev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-virtio-netdev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-net-virtio-network-portgroup.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-net-virtio-s390.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-virtio-s390.xml

S390: Adding testcases for s390

2012-07-11 11:19:05 +02:00

qemuxml2argv-net-virtio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-net-virtio.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-no-shutdown.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-no-shutdown.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-nographics-vga.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-nographics-vga.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-nographics.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-nographics.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-numad-auto-memory-vcpu-cpuset.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad-auto-memory-vcpu-cpuset.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-numad-auto-memory-vcpu-no-cpuset-and-placement.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad-auto-memory-vcpu-no-cpuset-and-placement.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-numad-auto-vcpu-no-numatune.xml

numad: Set memory policy from numad advisory nodeset

2012-05-08 16:57:32 -06:00

qemuxml2argv-numad-auto-vcpu-static-numatune.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad-auto-vcpu-static-numatune.xml

numad: Set memory policy from numad advisory nodeset

2012-05-08 16:57:32 -06:00

qemuxml2argv-numad-static-memory-auto-vcpu.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad-static-memory-auto-vcpu.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-numad-static-vcpu-no-numatune.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-numad.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numad.xml

numad: Set memory policy from numad advisory nodeset

2012-05-08 16:57:32 -06:00

qemuxml2argv-numatune-memory.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-numatune-memory.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-parallel-parport-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-parallel-parport-chardev.xml

Fix for parallel port passthrough for QEMU

2012-06-04 16:46:23 -06:00

qemuxml2argv-parallel-tcp-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-parallel-tcp-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-parallel-tcp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-parallel-tcp.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-pci-autoadd-addr.args

qemu: auto-add bridges and allow using them

2013-04-25 13:19:40 +02:00

qemuxml2argv-pci-autoadd-addr.xml

qemu: auto-add bridges and allow using them

2013-04-25 13:19:40 +02:00

qemuxml2argv-pci-autoadd-idx.args

qemu: auto-add bridges and allow using them

2013-04-25 13:19:40 +02:00

qemuxml2argv-pci-autoadd-idx.xml

qemu: auto-add bridges and allow using them

2013-04-25 13:19:40 +02:00

qemuxml2argv-pci-bridge.xml

qemu: auto-add bridges and allow using them

2013-04-25 13:19:40 +02:00

qemuxml2argv-pci-rom.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-pci-rom.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-ppc-dtb.args

qemu: add dtb option support

2013-03-19 15:48:58 -06:00

qemuxml2argv-ppc-dtb.xml

qemu: add dtb option support

2013-03-19 15:48:58 -06:00

qemuxml2argv-pseries-basic.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-pseries-basic.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-pseries-nvram.args

qemu: Add command line builder and parser for NVRAM.

2013-04-25 16:50:45 +08:00

qemuxml2argv-pseries-nvram.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-pseries-usb-default.args

Set legacy USB option with default for ppc64.

2013-04-19 11:30:49 +01:00

qemuxml2argv-pseries-usb-default.xml

Set legacy USB option with default for ppc64.

2013-04-19 11:30:49 +01:00

qemuxml2argv-pseries-usb-multi.args

Set legacy USB option with default for ppc64.

2013-04-19 11:30:49 +01:00

qemuxml2argv-pseries-usb-multi.xml

Set legacy USB option with default for ppc64.

2013-04-19 11:30:49 +01:00

qemuxml2argv-pseries-vio-address-clash.args

tests: Add qemuxml2argv tests for PPC64 pseries machine

2012-01-13 16:10:43 -07:00

qemuxml2argv-pseries-vio-address-clash.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-pseries-vio-user-assigned.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-pseries-vio-user-assigned.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-pseries-vio.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-pseries-vio.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-qemu-ns-no-env.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-qemu-ns-no-env.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-qemu-ns.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-qemu-ns.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-reboot-timeout-disabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-reboot-timeout-disabled.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-reboot-timeout-enabled.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-reboot-timeout-enabled.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-restore-v1.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-restore-v1.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-restore-v2-fd.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-restore-v2-fd.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-restore-v2.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-restore-v2.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-seclabel-dynamic-baselabel.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-dynamic-baselabel.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-seclabel-dynamic-override.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-dynamic-override.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-seclabel-dynamic.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-dynamic.xml

Multiple security drivers in XML data

2012-08-20 19:13:33 +02:00

qemuxml2argv-seclabel-none.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-none.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-seclabel-static-relabel.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-static-relabel.xml

qemu: Support numad

2012-03-15 12:24:56 +08:00

qemuxml2argv-seclabel-static.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-seclabel-static.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-serial-dev-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-dev-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-dev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-dev.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-serial-file-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-file-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-file.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-file.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-serial-many-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-many-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-many.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-many.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-serial-pty-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-pty-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-pty.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-pty.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-serial-target-port-auto.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-tcp-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-tcp-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-tcp-telnet-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-tcp-telnet-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-tcp-telnet.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-tcp-telnet.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-serial-tcp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-tcp.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-serial-udp-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-udp-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-udp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-udp.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-serial-unix-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-unix-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-unix.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-unix.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-serial-vc-chardev.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-vc-chardev.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-serial-vc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-serial-vc.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-smartcard-controller.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-controller.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-host-certificates.args

smartcard: spell ccid-card-emulated qemu property correctly

2013-04-02 06:23:33 -06:00

qemuxml2argv-smartcard-host-certificates.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-host.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-host.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-passthrough-spicevmc.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-passthrough-spicevmc.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smartcard-passthrough-tcp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smartcard-passthrough-tcp.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smbios.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smbios.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-smp.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-smp.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-sound-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-sound-device.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-sound.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-sound.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-tpm-passthrough.args

Add test case for TPM passthrough

2013-04-12 16:55:46 -04:00

qemuxml2argv-tpm-passthrough.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-usb1-usb2.args

qemu: make PCI multifunction support more manual

2011-10-01 11:48:28 -04:00

qemuxml2argv-usb1-usb2.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-controller.args

Default USB device is on slot 1 function 2

2011-09-05 15:03:27 +08:00

qemuxml2argv-usb-controller.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-hub.args

Default USB device is on slot 1 function 2

2011-09-05 15:03:27 +08:00

qemuxml2argv-usb-hub.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-ich9-companion.args

qemu: make PCI multifunction support more manual

2011-10-01 11:48:28 -04:00

qemuxml2argv-usb-ich9-companion.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-ich9-ehci-addr.args

Fix logic for assigning PCI addresses to USB2 companion controllers

2012-05-15 17:07:34 +01:00

qemuxml2argv-usb-ich9-ehci-addr.xml

Set a sensible default master start port for ehci companion controllers

2012-05-15 17:07:34 +01:00

qemuxml2argv-usb-ich9-no-companion.xml

Fix usb master startport parsing

2013-04-25 14:54:46 +02:00

qemuxml2argv-usb-none-hub.xml

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-none-other.xml

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-none-usbtablet.xml

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-none.args

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-none.xml

qemu: Add support for "none" USB controller

2012-08-02 12:13:48 +02:00

qemuxml2argv-usb-piix3-controller.args

qemu: make PCI multifunction support more manual

2011-10-01 11:48:28 -04:00

qemuxml2argv-usb-piix3-controller.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-ports.args

Default USB device is on slot 1 function 2

2011-09-05 15:03:27 +08:00

qemuxml2argv-usb-ports.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-usb-redir-boot.args

tests: add boot order for host and redirected USB to qemu argv test

2012-11-21 18:43:15 +01:00

qemuxml2argv-usb-redir-boot.xml

tests: add boot order for host and redirected USB to qemu argv test

2012-11-21 18:43:15 +01:00

qemuxml2argv-usb-redir-filter.args

test: add xml2argvtest for usb-redir filter and update xml schema

2012-09-13 17:22:37 +08:00

qemuxml2argv-usb-redir-filter.xml

test: add xml2argvtest for usb-redir filter and update xml schema

2012-09-13 17:22:37 +08:00

qemuxml2argv-usb-redir.args

qemu: make PCI multifunction support more manual

2011-10-01 11:48:28 -04:00

qemuxml2argv-usb-redir.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-video-device-pciaddr-default.args

qemu: Support ram bar size for qxl devices

2013-01-22 10:40:45 -07:00

qemuxml2argv-video-device-pciaddr-default.xml

tests: add one -device video device testcase

2012-12-17 14:02:58 +08:00

qemuxml2argv-virtio-lun.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-virtio-lun.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-virtio-rng-ccw.args

S390: Testcases for virtio-scsi and virtio-rng

2013-03-14 15:53:20 -06:00

qemuxml2argv-virtio-rng-ccw.xml

S390: Testcases for virtio-scsi and virtio-rng

2013-03-14 15:53:20 -06:00

qemuxml2argv-virtio-rng-default.args

Fix crash parsing RNG device specification

2013-03-07 12:57:10 +00:00

qemuxml2argv-virtio-rng-default.xml

Fix crash parsing RNG device specification

2013-03-07 12:57:10 +00:00

qemuxml2argv-virtio-rng-egd.args

tests: Add tests for virtio-rng device handling

2013-02-25 10:58:04 +01:00

qemuxml2argv-virtio-rng-egd.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-virtio-rng-random.args

virtio-rng: Add rate limiting options for virtio-RNG

2013-03-14 13:28:10 +01:00

qemuxml2argv-virtio-rng-random.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00

qemuxml2argv-watchdog-device.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-watchdog-device.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-watchdog-dump.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-watchdog-dump.xml

numad: Always output 'placement' of <vcpu>

2012-05-08 16:57:37 -06:00

qemuxml2argv-watchdog.args

qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly

2012-10-30 08:54:32 +01:00

qemuxml2argv-watchdog.xml

qemu: auto-add pci-root controller for pc machine types

2013-04-25 13:05:10 +02:00