mirror of
https://gitlab.com/libvirt/libvirt.git
synced 2024-09-19 22:21:27 +00:00
a8f75d2c7d
This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().
<interface type='direct'>
<source dev='eth0.100' mode='vepa'/>
<model type='virtio'/>
<virtualport type='802.1Qbg'>
<parameters managerid='12' typeid='0x123456' typeidversion='1'
instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
</virtualport>
<filterref filter='clean-traffic'/>
</interface>
<interface type='direct'>
<source dev='eth0.100' mode='vepa'/>
<model type='virtio'/>
<virtualport type='802.1Qbh'>
<parameters profileid='my_profile'/>
</virtualport>
</interface>
I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.
Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
- removing macvtap.h's dependency on domain_conf.h by
moving the virVirtualPortProfileDef structure into macvtap.h
and not passing virtDomainNetDefPtr to any functions in
macvtap.c
- Addressed most of Chris Wright's comments:
- indicating error in case virtualport XML node cannot be parsed
properly
- parsing hex and decimal numbers using virStrToLong_ui() with
parameter '0' for base
- tgifname (target interface name) variable wasn't necessary
to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
file for subsequent patches to easier make them generally available
for export
- passing the macvtap interface name rather than the link device since
this otherwise gives funny side effects when using netlink messages
where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
we wanted to use hook scripts for the setup and so the setup doesn't fail
here.
- if instance ID UUID is not supplied it will automatically be generated
- adapted schema to make instance ID UUID optional
- added test case
- parser and XML generator have been separated into their own
functions so they can be re-used elsewhere (passthrough case
for example)
- Adapted XML parser and generator support the above shown type
(802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
necessary to use (for SR-IOV)
1842 lines
46 KiB
XML
1842 lines
46 KiB
XML
<?xml version="1.0"?>
|
|
<grammar xmlns="http://relaxng.org/ns/structure/1.0" datatypeLibrary="http://www.w3.org/2001/XMLSchema-datatypes">
|
|
<!-- We handle only document defining a domain -->
|
|
<start>
|
|
<ref name="domain"/>
|
|
</start>
|
|
|
|
<include href='storageencryption.rng'/>
|
|
|
|
<!--
|
|
description element, maybe placed anywhere under the root
|
|
-->
|
|
<define name="description">
|
|
<element name="description">
|
|
<text/>
|
|
</element>
|
|
</define>
|
|
|
|
<!--
|
|
We handle only document defining a domain
|
|
-->
|
|
<define name="domain">
|
|
<element name="domain">
|
|
<ref name="hvs"/>
|
|
<ref name="ids"/>
|
|
<interleave>
|
|
<optional>
|
|
<ref name="description"/>
|
|
</optional>
|
|
<optional>
|
|
<ref name="cpu"/>
|
|
</optional>
|
|
<ref name="os"/>
|
|
<ref name="clock"/>
|
|
<ref name="resources"/>
|
|
<ref name="features"/>
|
|
<ref name="termination"/>
|
|
<optional>
|
|
<ref name="devices"/>
|
|
</optional>
|
|
<optional>
|
|
<ref name="seclabel"/>
|
|
</optional>
|
|
</interleave>
|
|
</element>
|
|
</define>
|
|
<define name="seclabel">
|
|
<element name="seclabel">
|
|
<attribute name="model">
|
|
<text/>
|
|
</attribute>
|
|
<attribute name="type">
|
|
<choice>
|
|
<value>dynamic</value>
|
|
<value>static</value>
|
|
</choice>
|
|
</attribute>
|
|
<element name="label">
|
|
<text/>
|
|
</element>
|
|
</element>
|
|
</define>
|
|
<define name="hvs">
|
|
<attribute name="type">
|
|
<choice>
|
|
<value>xen</value>
|
|
<value>kvm</value>
|
|
<value>kqemu</value>
|
|
<value>qemu</value>
|
|
<value>lxc</value>
|
|
<value>openvz</value>
|
|
<value>test</value>
|
|
</choice>
|
|
</attribute>
|
|
</define>
|
|
<define name="os">
|
|
<choice>
|
|
<ref name="osxen"/>
|
|
<ref name="oshvm"/>
|
|
<ref name="osexe"/>
|
|
</choice>
|
|
</define>
|
|
<define name="osxen">
|
|
<choice>
|
|
<group>
|
|
<optional>
|
|
<ref name="bootloader"/>
|
|
</optional>
|
|
<element name="os">
|
|
<ref name="ostypexen"/>
|
|
<ref name="osbootkernel"/>
|
|
</element>
|
|
</group>
|
|
<group>
|
|
<ref name="bootloader"/>
|
|
<optional>
|
|
<element name="os">
|
|
<ref name="ostypexen"/>
|
|
<optional>
|
|
<ref name="osbootkernel"/>
|
|
</optional>
|
|
</element>
|
|
</optional>
|
|
</group>
|
|
</choice>
|
|
</define>
|
|
<define name="oshvm">
|
|
<element name="os">
|
|
<ref name="ostypehvm"/>
|
|
<interleave>
|
|
<optional>
|
|
<element name="loader">
|
|
<ref name="absFilePath"/>
|
|
</element>
|
|
</optional>
|
|
<choice>
|
|
<ref name="osbootkernel"/>
|
|
<ref name="osbootdev"/>
|
|
</choice>
|
|
</interleave>
|
|
</element>
|
|
</define>
|
|
<define name="ostypexen">
|
|
<element name="type">
|
|
<optional>
|
|
<attribute name="arch">
|
|
<choice>
|
|
<value>i686</value>
|
|
<value>x86_64</value>
|
|
<value>ia64</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="machine">
|
|
<choice>
|
|
<value>xenpv</value>
|
|
<value>xenner</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<choice>
|
|
<value>xen</value>
|
|
<value>linux</value>
|
|
</choice>
|
|
</element>
|
|
</define>
|
|
<define name="ostypehvm">
|
|
<element name="type">
|
|
<optional>
|
|
<choice>
|
|
<ref name="hvmx86"/>
|
|
<ref name="hvmmips"/>
|
|
<ref name="hvmsparc"/>
|
|
<ref name="hvmppc"/>
|
|
</choice>
|
|
</optional>
|
|
<value>hvm</value>
|
|
</element>
|
|
</define>
|
|
<define name="hvmx86">
|
|
<group>
|
|
<optional>
|
|
<attribute name="arch">
|
|
<choice>
|
|
<value>i686</value>
|
|
<value>x86_64</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="machine">
|
|
<data type="string">
|
|
<param name="pattern">[a-zA-Z0-9_\.\-]+</param>
|
|
</data>
|
|
</attribute>
|
|
</optional>
|
|
</group>
|
|
</define>
|
|
<define name="hvmmips">
|
|
<group>
|
|
<optional>
|
|
<attribute name="arch">
|
|
<value>mips</value>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="machine">
|
|
<value>mips</value>
|
|
</attribute>
|
|
</optional>
|
|
</group>
|
|
</define>
|
|
<define name="hvmsparc">
|
|
<group>
|
|
<optional>
|
|
<attribute name="arch">
|
|
<value>sparc</value>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="machine">
|
|
<value>sun4m</value>
|
|
</attribute>
|
|
</optional>
|
|
</group>
|
|
</define>
|
|
<define name="hvmppc">
|
|
<group>
|
|
<optional>
|
|
<attribute name="arch">
|
|
<value>ppc</value>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="machine">
|
|
<choice>
|
|
<value>g3beige</value>
|
|
<value>mac99</value>
|
|
<value>prep</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
</group>
|
|
</define>
|
|
<define name="osexe">
|
|
<element name="os">
|
|
<element name="type">
|
|
<value>exe</value>
|
|
</element>
|
|
<interleave>
|
|
<optional>
|
|
<element name="init">
|
|
<ref name="absFilePath"/>
|
|
</element>
|
|
</optional>
|
|
</interleave>
|
|
</element>
|
|
</define>
|
|
<!--
|
|
The Identifiers can be:
|
|
- an optional id attribute with a number on the domain element
|
|
- a mandatory name
|
|
- an optional uuid
|
|
-->
|
|
<define name="ids">
|
|
<optional>
|
|
<attribute name="id">
|
|
<ref name="unsignedInt"/>
|
|
</attribute>
|
|
</optional>
|
|
<interleave>
|
|
<element name="name">
|
|
<ref name="domainName"/>
|
|
</element>
|
|
<optional>
|
|
<element name="uuid">
|
|
<ref name="UUID"/>
|
|
</element>
|
|
</optional>
|
|
</interleave>
|
|
</define>
|
|
<!--
|
|
Resources usage defines the amount of memory (maximum and possibly
|
|
current usage) and number of virtual CPUs used by that domain.
|
|
We can't check here the rule that currentMemory <= memory
|
|
-->
|
|
<define name="resources">
|
|
<interleave>
|
|
<element name="memory">
|
|
<ref name="memoryKB"/>
|
|
</element>
|
|
<optional>
|
|
<element name="currentMemory">
|
|
<ref name="memoryKB"/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="memoryBacking">
|
|
<optional>
|
|
<element name="hugepages">
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="vcpu">
|
|
<optional>
|
|
<attribute name="cpuset"/>
|
|
</optional>
|
|
<ref name="countCPU"/>
|
|
</element>
|
|
</optional>
|
|
</interleave>
|
|
</define>
|
|
<define name="clock">
|
|
<zeroOrMore>
|
|
<ref name="timer"/>
|
|
</zeroOrMore>
|
|
<optional>
|
|
<element name="clock">
|
|
<choice>
|
|
<attribute name="offset">
|
|
<value>localtime</value>
|
|
</attribute>
|
|
<attribute name="offset">
|
|
<value>utc</value>
|
|
</attribute>
|
|
<group>
|
|
<attribute name="offset">
|
|
<value>timezone</value>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="timezone">
|
|
<ref name="timeZone"/>
|
|
</attribute>
|
|
</optional>
|
|
</group>
|
|
<group>
|
|
<attribute name="offset">
|
|
<value>variable</value>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="adjustment">
|
|
<ref name="timeDelta"/>
|
|
</attribute>
|
|
</optional>
|
|
</group>
|
|
</choice>
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
</define>
|
|
<define name="timer">
|
|
<element name="timer">
|
|
<attribute name="name">
|
|
<choice>
|
|
<value>platform</value>
|
|
<value>pit</value>
|
|
<value>rtc</value>
|
|
<value>hpet</value>
|
|
<value>tsc</value>
|
|
</choice>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="track">
|
|
<choice>
|
|
<value>boot</value>
|
|
<value>guest</value>
|
|
<value>wall</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="tickpolicy">
|
|
<choice>
|
|
<value>delay</value>
|
|
<value>catchup</value>
|
|
<value>merge</value>
|
|
<value>discard</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<ref name="catchup"/>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="frequency">
|
|
<ref name="unsignedInt"/>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="mode">
|
|
<choice>
|
|
<value>auto</value>
|
|
<value>native</value>
|
|
<value>emulate</value>
|
|
<value>paravirt</value>
|
|
<value>smpsafe</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="present">
|
|
<choice>
|
|
<value>yes</value>
|
|
<value>no</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<empty/>
|
|
</element>
|
|
</define>
|
|
<define name="catchup">
|
|
<element name="catchup">
|
|
<optional>
|
|
<attribute name="threshold">
|
|
<ref name="unsignedInt"/>
|
|
</attribute>
|
|
<attribute name="slew">
|
|
<ref name="unsignedInt"/>
|
|
</attribute>
|
|
<attribute name="limit">
|
|
<ref name="unsignedInt"/>
|
|
</attribute>
|
|
</optional>
|
|
</element>
|
|
</define>
|
|
<!--
|
|
A bootloader may be used to extract the OS information instead of
|
|
defining the OS parameter in the instance. It points just to the
|
|
binary or script used to extract the data from the first disk device.
|
|
-->
|
|
<define name="bootloader">
|
|
<interleave>
|
|
<element name="bootloader">
|
|
<choice>
|
|
<ref name="absFilePath"/>
|
|
<empty/>
|
|
</choice>
|
|
</element>
|
|
<optional>
|
|
<element name="bootloader_args">
|
|
<text/>
|
|
</element>
|
|
</optional>
|
|
</interleave>
|
|
</define>
|
|
<define name="osbootkernel">
|
|
<interleave>
|
|
<element name="kernel">
|
|
<ref name="absFilePath"/>
|
|
</element>
|
|
<optional>
|
|
<element name="initrd">
|
|
<ref name="absFilePath"/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="root">
|
|
<ref name="devicePath"/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="cmdline">
|
|
<text/>
|
|
</element>
|
|
</optional>
|
|
</interleave>
|
|
</define>
|
|
<define name="osbootdev">
|
|
<element name="boot">
|
|
<attribute name="dev">
|
|
<choice>
|
|
<value>hd</value>
|
|
<value>fd</value>
|
|
<value>cdrom</value>
|
|
<value>network</value>
|
|
</choice>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
</define>
|
|
<define name="diskspec">
|
|
<optional>
|
|
<ref name="driver"/>
|
|
</optional>
|
|
<ref name="target"/>
|
|
<optional>
|
|
<element name="readonly">
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="shareable">
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="serial">
|
|
<ref name="diskSerial"/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<ref name="encryption"/>
|
|
</optional>
|
|
<optional>
|
|
<ref name="address"/>
|
|
</optional>
|
|
</define>
|
|
<!--
|
|
A disk description can be either of type file or block
|
|
The name of the attribute on the source element depends on the type
|
|
|
|
-->
|
|
<define name="disk">
|
|
<element name="disk">
|
|
<optional>
|
|
<attribute name="device">
|
|
<choice>
|
|
<value>floppy</value>
|
|
<value>disk</value>
|
|
<value>cdrom</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<choice>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>file</value>
|
|
</attribute>
|
|
<interleave>
|
|
<optional>
|
|
<element name="source">
|
|
<attribute name="file">
|
|
<ref name="absFilePath"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<ref name="diskspec"/>
|
|
</interleave>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>block</value>
|
|
</attribute>
|
|
<interleave>
|
|
<optional>
|
|
<element name="source">
|
|
<attribute name="dev">
|
|
<ref name="deviceName"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<ref name="diskspec"/>
|
|
</interleave>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>dir</value>
|
|
</attribute>
|
|
<interleave>
|
|
<optional>
|
|
<element name="source">
|
|
<attribute name="dir">
|
|
<ref name="absFilePath"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<ref name="diskspec"/>
|
|
</interleave>
|
|
</group>
|
|
<ref name="diskspec"/>
|
|
</choice>
|
|
</element>
|
|
</define>
|
|
<define name="target">
|
|
<element name="target">
|
|
<attribute name="dev">
|
|
<ref name="deviceName"/>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="bus">
|
|
<choice>
|
|
<value>ide</value>
|
|
<value>fdc</value>
|
|
<value>scsi</value>
|
|
<value>virtio</value>
|
|
<value>xen</value>
|
|
<value>usb</value>
|
|
<value>uml</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
</element>
|
|
</define>
|
|
<!--
|
|
Disk may use a special driver for access. Currently this is
|
|
only defined for Xen for tap/aio and file, but will certainly be
|
|
extended in the future, and libvirt doesn't look for specific values.
|
|
-->
|
|
<define name="driver">
|
|
<element name="driver">
|
|
<choice>
|
|
<group>
|
|
<ref name="driverFormat"/>
|
|
<optional>
|
|
<ref name="driverCache"/>
|
|
</optional>
|
|
</group>
|
|
<group>
|
|
<optional>
|
|
<ref name="driverFormat"/>
|
|
</optional>
|
|
<ref name="driverCache"/>
|
|
</group>
|
|
</choice>
|
|
<optional>
|
|
<ref name="driverErrorPolicy"/>
|
|
</optional>
|
|
<empty/>
|
|
</element>
|
|
</define>
|
|
<define name="driverFormat">
|
|
<attribute name="name">
|
|
<ref name="genericName"/>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="type">
|
|
<ref name="genericName"/>
|
|
</attribute>
|
|
</optional>
|
|
</define>
|
|
<define name="driverCache">
|
|
<attribute name="cache">
|
|
<choice>
|
|
<value>none</value>
|
|
<value>writeback</value>
|
|
<value>writethrough</value>
|
|
</choice>
|
|
</attribute>
|
|
</define>
|
|
<define name="driverErrorPolicy">
|
|
<attribute name="error_policy">
|
|
<choice>
|
|
<value>stop</value>
|
|
<value>ignore</value>
|
|
<value>enospace</value>
|
|
</choice>
|
|
</attribute>
|
|
</define>
|
|
<define name="controller">
|
|
<element name="controller">
|
|
<choice>
|
|
<group>
|
|
<optional>
|
|
<attribute name="type">
|
|
<choice>
|
|
<value>fdc</value>
|
|
<value>ide</value>
|
|
<value>scsi</value>
|
|
<value>sata</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
</group>
|
|
<!-- virtio-serial can have 2 additional attributes -->
|
|
<group>
|
|
<attribute name="type">
|
|
<value>virtio-serial</value>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="ports">
|
|
<ref name="unsignedInt"/>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="vectors">
|
|
<ref name="unsignedInt"/>
|
|
</attribute>
|
|
</optional>
|
|
</group>
|
|
</choice>
|
|
<attribute name="index">
|
|
<ref name="unsignedInt"/>
|
|
</attribute>
|
|
<optional>
|
|
<ref name="address"/>
|
|
</optional>
|
|
</element>
|
|
</define>
|
|
<define name="filesystem">
|
|
<element name="filesystem">
|
|
<choice>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>file</value>
|
|
</attribute>
|
|
<interleave>
|
|
<element name="source">
|
|
<attribute name="file">
|
|
<ref name="absFilePath"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
<ref name="filesystemtgt"/>
|
|
</interleave>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>block</value>
|
|
</attribute>
|
|
<interleave>
|
|
<element name="source">
|
|
<attribute name="dev">
|
|
<ref name="deviceName"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
<ref name="filesystemtgt"/>
|
|
</interleave>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>mount</value>
|
|
</attribute>
|
|
<interleave>
|
|
<element name="source">
|
|
<attribute name="dir">
|
|
<ref name="absFilePath"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
<ref name="filesystemtgt"/>
|
|
</interleave>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>template</value>
|
|
</attribute>
|
|
<interleave>
|
|
<element name="source">
|
|
<attribute name="name">
|
|
<ref name="genericName"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
<ref name="filesystemtgt"/>
|
|
</interleave>
|
|
</group>
|
|
</choice>
|
|
<optional>
|
|
<ref name="address"/>
|
|
</optional>
|
|
</element>
|
|
</define>
|
|
<define name="filesystemtgt">
|
|
<element name="target">
|
|
<attribute name="dir">
|
|
<ref name="absDirPath"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
</define>
|
|
<!--
|
|
An interface description can either be of type bridge in which case
|
|
it will use a bridging source, or of type ethernet which uses a device
|
|
source and a device target instead. They both share a set of interface
|
|
options. FIXME
|
|
-->
|
|
<define name="interface">
|
|
<element name="interface">
|
|
<choice>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>bridge</value>
|
|
</attribute>
|
|
<interleave>
|
|
<optional>
|
|
<element name="source">
|
|
<attribute name="bridge">
|
|
<ref name="deviceName"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<ref name="interface-options"/>
|
|
</interleave>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>ethernet</value>
|
|
</attribute>
|
|
<interleave>
|
|
<optional>
|
|
<element name="source">
|
|
<attribute name="dev">
|
|
<ref name="deviceName"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<ref name="interface-options"/>
|
|
</interleave>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>network</value>
|
|
</attribute>
|
|
<interleave>
|
|
<element name="source">
|
|
<attribute name="network">
|
|
<ref name="deviceName"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
<ref name="interface-options"/>
|
|
</interleave>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>direct</value>
|
|
</attribute>
|
|
<interleave>
|
|
<element name="source">
|
|
<attribute name="dev">
|
|
<ref name="deviceName"/>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="mode">
|
|
<ref name="bridgeMode"/>
|
|
</attribute>
|
|
</optional>
|
|
<empty/>
|
|
</element>
|
|
<optional>
|
|
<ref name="virtualPortProfile"/>
|
|
</optional>
|
|
<ref name="interface-options"/>
|
|
</interleave>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>user</value>
|
|
</attribute>
|
|
<interleave>
|
|
<ref name="interface-options"/>
|
|
</interleave>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>internal</value>
|
|
</attribute>
|
|
<interleave>
|
|
<element name="source">
|
|
<attribute name="name">
|
|
<ref name="deviceName"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
<ref name="interface-options"/>
|
|
</interleave>
|
|
</group>
|
|
</choice>
|
|
</element>
|
|
</define>
|
|
<!--
|
|
The interface options possible are:
|
|
- the MAC address
|
|
- the IP address bound to the interface
|
|
- the name of the script used to set up the binding
|
|
- the target device used
|
|
-->
|
|
<define name="interface-options">
|
|
<interleave>
|
|
<optional>
|
|
<element name="target">
|
|
<attribute name="dev">
|
|
<ref name="deviceName"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="mac">
|
|
<attribute name="address">
|
|
<ref name="addrMAC"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="ip">
|
|
<attribute name="address">
|
|
<ref name="addrIP"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="script">
|
|
<attribute name="path">
|
|
<ref name="filePath"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="model">
|
|
<attribute name="type"/>
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<ref name="address"/>
|
|
</optional>
|
|
<optional>
|
|
<element name="filterref">
|
|
<ref name="filterref-node-attributes"/>
|
|
</element>
|
|
</optional>
|
|
</interleave>
|
|
</define>
|
|
<define name="virtualPortProfile">
|
|
<choice>
|
|
<group>
|
|
<element name="virtualport">
|
|
<attribute name="type">
|
|
<value>802.1Qbg</value>
|
|
</attribute>
|
|
<element name="parameters">
|
|
<attribute name="managerid">
|
|
<ref name="uint8range"/>
|
|
</attribute>
|
|
<attribute name="typeid">
|
|
<ref name="uint24range"/>
|
|
</attribute>
|
|
<attribute name="typeidversion">
|
|
<ref name="uint8range"/>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="instanceid">
|
|
<ref name="UUID"/>
|
|
</attribute>
|
|
</optional>
|
|
</element>
|
|
</element>
|
|
</group>
|
|
<group>
|
|
<element name="virtualport">
|
|
<attribute name="type">
|
|
<value>802.1Qbh</value>
|
|
</attribute>
|
|
<element name="parameters">
|
|
<attribute name="profileid">
|
|
<ref name="virtualPortProfileID"/>
|
|
</attribute>
|
|
</element>
|
|
</element>
|
|
</group>
|
|
</choice>
|
|
</define>
|
|
<!--
|
|
An emulator description is just a path to the binary used for the task
|
|
-->
|
|
<define name="emulator">
|
|
<element name="emulator">
|
|
<ref name="absFilePath"/>
|
|
</element>
|
|
</define>
|
|
<!--
|
|
A graphic description, currently in Xen only 2 types are supported:
|
|
- sdl with optional display, xauth and fullscreen
|
|
- vnc with a required port and optional listen IP address, password
|
|
and keymap
|
|
-->
|
|
<define name="graphic">
|
|
<element name="graphics">
|
|
<choice>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>sdl</value>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="display">
|
|
<text/>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="xauth">
|
|
<text/>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="fullscreen">
|
|
<choice>
|
|
<value>yes</value>
|
|
<value>no</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>vnc</value>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="port">
|
|
<ref name="PortNumber"/>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="autoport">
|
|
<choice>
|
|
<value>yes</value>
|
|
<value>no</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="listen">
|
|
<ref name="addrIP"/>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="passwd">
|
|
<text/>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="keymap">
|
|
<text/>
|
|
</attribute>
|
|
</optional>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>rdp</value>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="port">
|
|
<ref name="PortNumber"/>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="autoport">
|
|
<choice>
|
|
<value>yes</value>
|
|
<value>no</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="replaceUser">
|
|
<choice>
|
|
<value>yes</value>
|
|
<value>no</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="multiUser">
|
|
<choice>
|
|
<value>yes</value>
|
|
<value>no</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="listen">
|
|
<ref name="addrIP"/>
|
|
</attribute>
|
|
</optional>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>desktop</value>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="display">
|
|
<text/>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="fullscreen">
|
|
<choice>
|
|
<value>yes</value>
|
|
<value>no</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
</group>
|
|
</choice>
|
|
</element>
|
|
</define>
|
|
<!--
|
|
A graphic description, currently in Xen only 2 types are supported:
|
|
- sdl with optional display, xauth and fullscreen
|
|
- vnc with a required port and optional listen IP address, password
|
|
and keymap
|
|
-->
|
|
<define name="video">
|
|
<element name="video">
|
|
<optional>
|
|
<element name="model">
|
|
<attribute name="type">
|
|
<choice>
|
|
<value>vga</value>
|
|
<value>cirrus</value>
|
|
<value>vmvga</value>
|
|
<value>xen</value>
|
|
<value>vbox</value>
|
|
</choice>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="vram">
|
|
<ref name="unsignedInt"/>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="heads">
|
|
<ref name="unsignedInt"/>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<element name="acceleration">
|
|
<optional>
|
|
<attribute name="accel3d">
|
|
<choice>
|
|
<value>yes</value>
|
|
<value>no</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="accel2d">
|
|
<choice>
|
|
<value>yes</value>
|
|
<value>no</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
</element>
|
|
</optional>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<ref name="address"/>
|
|
</optional>
|
|
</element>
|
|
</define>
|
|
<!--
|
|
When a domain terminates multiple policies can be applied depending
|
|
on how it ended:
|
|
-->
|
|
<define name="termination">
|
|
<interleave>
|
|
<optional>
|
|
<element name="on_reboot">
|
|
<ref name="offOptions"/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="on_poweroff">
|
|
<ref name="offOptions"/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="on_crash">
|
|
<ref name="offOptions"/>
|
|
</element>
|
|
</optional>
|
|
</interleave>
|
|
</define>
|
|
<!--
|
|
Options when a domain terminates:
|
|
destroy: The domain is cleaned up
|
|
restart: A new domain is started in place of the old one
|
|
preserve: The domain will remain in memory until it is destroyed manually
|
|
rename-restart: a variant of the previous one but where the old domain is
|
|
renamed before being saved to allow a restart
|
|
-->
|
|
<define name="offOptions">
|
|
<choice>
|
|
<value>destroy</value>
|
|
<value>restart</value>
|
|
<value>preserve</value>
|
|
<value>rename-restart</value>
|
|
</choice>
|
|
</define>
|
|
<!--
|
|
Specific setup for a qemu emulated character device. Note: this
|
|
definition doesn't fully specify the constraints on this node.
|
|
-->
|
|
<define name="qemucdev">
|
|
<ref name="qemucdevSrcType"/>
|
|
<optional>
|
|
<attribute name="tty">
|
|
<ref name="devicePath"/>
|
|
</attribute>
|
|
</optional>
|
|
<interleave>
|
|
<ref name="qemucdevSrcDef"/>
|
|
<optional>
|
|
<element name="target">
|
|
<optional>
|
|
<attribute name="port"/>
|
|
</optional>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<ref name="address"/>
|
|
</optional>
|
|
</interleave>
|
|
</define>
|
|
<define name="qemucdevSrcType">
|
|
<attribute name="type">
|
|
<choice>
|
|
<value>dev</value>
|
|
<value>file</value>
|
|
<value>pipe</value>
|
|
<value>unix</value>
|
|
<value>tcp</value>
|
|
<value>udp</value>
|
|
<value>null</value>
|
|
<value>stdio</value>
|
|
<value>vc</value>
|
|
<value>pty</value>
|
|
</choice>
|
|
</attribute>
|
|
</define>
|
|
<define name="qemucdevSrcDef">
|
|
<zeroOrMore>
|
|
<element name="source">
|
|
<optional>
|
|
<attribute name="mode"/>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="path"/>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="host"/>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="service"/>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="wiremode"/>
|
|
</optional>
|
|
</element>
|
|
</zeroOrMore>
|
|
<optional>
|
|
<element name="protocol">
|
|
<optional>
|
|
<attribute name="type"/>
|
|
</optional>
|
|
</element>
|
|
</optional>
|
|
</define>
|
|
<!--
|
|
The description for a console
|
|
just a tty device
|
|
-->
|
|
<define name="console">
|
|
<element name="console">
|
|
<choice>
|
|
<group>
|
|
<optional>
|
|
<attribute name="tty">
|
|
<ref name="devicePath"/>
|
|
</attribute>
|
|
</optional>
|
|
<empty/>
|
|
</group>
|
|
<ref name="qemucdev"/>
|
|
</choice>
|
|
</element>
|
|
</define>
|
|
<define name="sound">
|
|
<element name="sound">
|
|
<attribute name="model">
|
|
<choice>
|
|
<value>sb16</value>
|
|
<value>es1370</value>
|
|
<value>pcspk</value>
|
|
<value>ac97</value>
|
|
</choice>
|
|
</attribute>
|
|
<optional>
|
|
<ref name="address"/>
|
|
</optional>
|
|
</element>
|
|
</define>
|
|
<define name="watchdog">
|
|
<element name="watchdog">
|
|
<attribute name="model">
|
|
<choice>
|
|
<value>i6300esb</value>
|
|
<value>ib700</value>
|
|
</choice>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="action">
|
|
<choice>
|
|
<value>reset</value>
|
|
<value>shutdown</value>
|
|
<value>poweroff</value>
|
|
<value>pause</value>
|
|
<value>none</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<ref name="address"/>
|
|
</optional>
|
|
</element>
|
|
</define>
|
|
<define name="parallel">
|
|
<element name="parallel">
|
|
<ref name="qemucdev"/>
|
|
</element>
|
|
</define>
|
|
<define name="serial">
|
|
<element name="serial">
|
|
<ref name="qemucdev"/>
|
|
</element>
|
|
</define>
|
|
<define name="guestfwdTarget">
|
|
<element name="target">
|
|
<attribute name="type">
|
|
<value>guestfwd</value>
|
|
</attribute>
|
|
<attribute name="address"/>
|
|
<attribute name="port"/>
|
|
</element>
|
|
</define>
|
|
<define name="virtioTarget">
|
|
<element name="target">
|
|
<attribute name="type">
|
|
<value>virtio</value>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="name"/>
|
|
</optional>
|
|
</element>
|
|
</define>
|
|
<define name="channel">
|
|
<element name="channel">
|
|
<ref name="qemucdevSrcType"/>
|
|
<interleave>
|
|
<ref name="qemucdevSrcDef"/>
|
|
<choice>
|
|
<ref name="guestfwdTarget"/>
|
|
<ref name="virtioTarget"/>
|
|
</choice>
|
|
<optional>
|
|
<ref name="address"/>
|
|
</optional>
|
|
</interleave>
|
|
</element>
|
|
</define>
|
|
<define name="input">
|
|
<element name="input">
|
|
<attribute name="type">
|
|
<choice>
|
|
<value>tablet</value>
|
|
<value>mouse</value>
|
|
</choice>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="bus">
|
|
<choice>
|
|
<value>ps2</value>
|
|
<value>usb</value>
|
|
<value>xen</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<ref name="address"/>
|
|
</optional>
|
|
</element>
|
|
</define>
|
|
<define name="hostdev">
|
|
<element name="hostdev">
|
|
<optional>
|
|
<attribute name="mode">
|
|
<choice>
|
|
<value>subsystem</value>
|
|
<value>capabilities</value>
|
|
</choice>
|
|
</attribute>
|
|
<attribute name="type">
|
|
<choice>
|
|
<value>usb</value>
|
|
<value>pci</value>
|
|
</choice>
|
|
</attribute>
|
|
<attribute name="managed">
|
|
<choice>
|
|
<value>yes</value>
|
|
<value>no</value>
|
|
</choice>
|
|
</attribute>
|
|
</optional>
|
|
<group>
|
|
<element name="source">
|
|
<choice>
|
|
<group>
|
|
<ref name="usbproduct"/>
|
|
<optional>
|
|
<ref name="usbaddress"/>
|
|
</optional>
|
|
</group>
|
|
<ref name="usbaddress"/>
|
|
<element name="address">
|
|
<ref name="pciaddress"/>
|
|
</element>
|
|
</choice>
|
|
</element>
|
|
</group>
|
|
<optional>
|
|
<ref name="address"/>
|
|
</optional>
|
|
</element>
|
|
</define>
|
|
<define name="usbproduct">
|
|
<element name="vendor">
|
|
<attribute name="id">
|
|
<ref name="usbId"/>
|
|
</attribute>
|
|
</element>
|
|
<element name="product">
|
|
<attribute name="id">
|
|
<ref name="usbId"/>
|
|
</attribute>
|
|
</element>
|
|
</define>
|
|
<define name="usbaddress">
|
|
<element name="address">
|
|
<attribute name="bus">
|
|
<ref name="usbAddr"/>
|
|
</attribute>
|
|
<attribute name="device">
|
|
<ref name="usbAddr"/>
|
|
</attribute>
|
|
</element>
|
|
</define>
|
|
<define name="pciaddress">
|
|
<optional>
|
|
<attribute name="domain">
|
|
<ref name="pciDomain"/>
|
|
</attribute>
|
|
</optional>
|
|
<attribute name="bus">
|
|
<ref name="pciBus"/>
|
|
</attribute>
|
|
<attribute name="slot">
|
|
<ref name="pciSlot"/>
|
|
</attribute>
|
|
<attribute name="function">
|
|
<ref name="pciFunc"/>
|
|
</attribute>
|
|
</define>
|
|
<define name="driveaddress">
|
|
<optional>
|
|
<attribute name="controller">
|
|
<ref name="driveController"/>
|
|
</attribute>
|
|
</optional>
|
|
<optional>
|
|
<attribute name="bus">
|
|
<ref name="driveBus"/>
|
|
</attribute>
|
|
</optional>
|
|
<attribute name="unit">
|
|
<ref name="driveUnit"/>
|
|
</attribute>
|
|
</define>
|
|
<define name="virtioserialaddress">
|
|
<attribute name="controller">
|
|
<ref name="driveController"/>
|
|
</attribute>
|
|
<optional>
|
|
<attribute name="bus">
|
|
<ref name="driveBus"/>
|
|
</attribute>
|
|
</optional>
|
|
</define>
|
|
<!--
|
|
Devices attached to a domain.
|
|
-->
|
|
<define name="devices">
|
|
<element name="devices">
|
|
<interleave>
|
|
<optional>
|
|
<ref name="emulator"/>
|
|
</optional>
|
|
<zeroOrMore>
|
|
<choice>
|
|
<ref name="disk"/>
|
|
<ref name="controller"/>
|
|
<ref name="filesystem"/>
|
|
<ref name="interface"/>
|
|
<ref name="input"/>
|
|
<ref name="sound"/>
|
|
<ref name="hostdev"/>
|
|
<ref name="graphic"/>
|
|
<ref name="video"/>
|
|
<ref name="console"/>
|
|
<ref name="parallel"/>
|
|
<ref name="serial"/>
|
|
<ref name="channel"/>
|
|
</choice>
|
|
</zeroOrMore>
|
|
<optional>
|
|
<ref name="watchdog"/>
|
|
</optional>
|
|
</interleave>
|
|
</element>
|
|
</define>
|
|
<!--
|
|
A set of optional features: PAE, APIC and ACPI support
|
|
-->
|
|
<define name="features">
|
|
<optional>
|
|
<element name="features">
|
|
<interleave>
|
|
<optional>
|
|
<element name="pae">
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="apic">
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
<optional>
|
|
<element name="acpi">
|
|
<empty/>
|
|
</element>
|
|
</optional>
|
|
</interleave>
|
|
</element>
|
|
</optional>
|
|
</define>
|
|
<!--
|
|
CPU specification
|
|
-->
|
|
<define name="cpu">
|
|
<element name="cpu">
|
|
<choice>
|
|
<ref name="cpuTopology"/>
|
|
<group>
|
|
<ref name="cpuMatch"/>
|
|
<interleave>
|
|
<ref name="cpuModel"/>
|
|
<optional>
|
|
<ref name="cpuTopology"/>
|
|
</optional>
|
|
<zeroOrMore>
|
|
<ref name="cpuFeature"/>
|
|
</zeroOrMore>
|
|
</interleave>
|
|
</group>
|
|
</choice>
|
|
</element>
|
|
</define>
|
|
|
|
<define name="cpuMatch">
|
|
<attribute name="match">
|
|
<choice>
|
|
<value>minimum</value>
|
|
<value>exact</value>
|
|
<value>strict</value>
|
|
</choice>
|
|
</attribute>
|
|
</define>
|
|
|
|
<define name="cpuModel">
|
|
<element name="model">
|
|
<text/>
|
|
</element>
|
|
</define>
|
|
|
|
<define name="cpuFeature">
|
|
<element name="feature">
|
|
<attribute name="policy">
|
|
<choice>
|
|
<value>force</value>
|
|
<value>require</value>
|
|
<value>optional</value>
|
|
<value>disable</value>
|
|
<value>forbid</value>
|
|
</choice>
|
|
</attribute>
|
|
<attribute name="name">
|
|
<ref name="featureName"/>
|
|
</attribute>
|
|
<empty/>
|
|
</element>
|
|
</define>
|
|
|
|
<define name="cpuTopology">
|
|
<element name="topology">
|
|
<attribute name="sockets">
|
|
<ref name="positiveInteger"/>
|
|
</attribute>
|
|
<attribute name="cores">
|
|
<ref name="positiveInteger"/>
|
|
</attribute>
|
|
<attribute name="threads">
|
|
<ref name="positiveInteger"/>
|
|
</attribute>
|
|
</element>
|
|
</define>
|
|
|
|
<define name="address">
|
|
<element name="address">
|
|
<choice>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>pci</value>
|
|
</attribute>
|
|
<ref name="pciaddress"/>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>drive</value>
|
|
</attribute>
|
|
<ref name="driveaddress"/>
|
|
</group>
|
|
<group>
|
|
<attribute name="type">
|
|
<value>virtio-serial</value>
|
|
</attribute>
|
|
<ref name="virtioserialaddress"/>
|
|
</group>
|
|
</choice>
|
|
</element>
|
|
</define>
|
|
|
|
<define name="filterref-node-attributes">
|
|
<attribute name="filter">
|
|
<data type="NCName"/>
|
|
</attribute>
|
|
<optional>
|
|
<element name="parameter">
|
|
<attribute name="name">
|
|
<ref name="filter-param-name"/>
|
|
</attribute>
|
|
<attribute name="value">
|
|
<ref name="filter-param-value"/>
|
|
</attribute>
|
|
</element>
|
|
</optional>
|
|
</define>
|
|
|
|
<!--
|
|
Type library
|
|
|
|
Our unsignedInt doesn't allow a leading '+' in its lexical form
|
|
A domain name shoul be made of ascii, numbers, _-+ and is non-empty
|
|
UUID currently allows only the 32 characters strict syntax
|
|
memoryKB request at least 4Mbytes though Xen will grow bigger if too low
|
|
-->
|
|
<define name="unsignedInt">
|
|
<data type="unsignedInt">
|
|
<param name="pattern">[0-9]+</param>
|
|
</data>
|
|
</define>
|
|
<define name='positiveInteger'>
|
|
<data type='positiveInteger'>
|
|
<param name="pattern">[0-9]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="countCPU">
|
|
<data type="unsignedShort">
|
|
<param name="pattern">[0-9]+</param>
|
|
<param name="minInclusive">1</param>
|
|
</data>
|
|
</define>
|
|
<define name="PortNumber">
|
|
<data type="short">
|
|
<param name="minInclusive">-1</param>
|
|
</data>
|
|
</define>
|
|
<define name="memoryKB">
|
|
<data type="unsignedInt">
|
|
<param name="pattern">[0-9]+</param>
|
|
<param name="minInclusive">4000</param>
|
|
</data>
|
|
</define>
|
|
<define name="domainName">
|
|
<data type="string">
|
|
<param name="pattern">[A-Za-z0-9_\.\+\-&:/]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="diskSerial">
|
|
<data type="string">
|
|
<param name="pattern">[A-Za-z0-9_\.\+\-]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="genericName">
|
|
<data type="string">
|
|
<param name="pattern">[a-zA-Z0-9_\+\-]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="UUID">
|
|
<choice>
|
|
<data type="string">
|
|
<param name="pattern">[a-fA-F0-9]{32}</param>
|
|
</data>
|
|
<data type="string">
|
|
<param name="pattern">[a-fA-F0-9]{8}\-([a-fA-F0-9]{4}\-){3}[a-fA-F0-9]{12}</param>
|
|
</data>
|
|
</choice>
|
|
</define>
|
|
<define name="filePath">
|
|
<data type="string">
|
|
<param name="pattern">[a-zA-Z0-9_\.\+\-&/%]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="absFilePath">
|
|
<data type="string">
|
|
<param name="pattern">/[a-zA-Z0-9_\.\+\-&/%]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="absDirPath">
|
|
<data type="string">
|
|
<param name="pattern">/[a-zA-Z0-9_\.\+\-&/%]*</param>
|
|
</data>
|
|
</define>
|
|
<define name="devicePath">
|
|
<data type="string">
|
|
<param name="pattern">/[a-zA-Z0-9_\+\-/%]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="deviceName">
|
|
<data type="string">
|
|
<param name="pattern">[a-zA-Z0-9_\.\-:/]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="bridgeMode">
|
|
<data type="string">
|
|
<param name="pattern">(vepa|bridge|private)</param>
|
|
</data>
|
|
</define>
|
|
<define name="addrMAC">
|
|
<data type="string">
|
|
<param name="pattern">([a-fA-F0-9]{2}:){5}[a-fA-F0-9]{2}</param>
|
|
</data>
|
|
</define>
|
|
<define name="addrIP">
|
|
<data type="string">
|
|
<param name="pattern">([0-2]?[0-9]?[0-9]\.){3}[0-2]?[0-9]?[0-9]</param>
|
|
</data>
|
|
</define>
|
|
<define name="usbId">
|
|
<data type="string">
|
|
<param name="pattern">(0x)?[0-9a-fA-F]{1,4}</param>
|
|
</data>
|
|
</define>
|
|
<define name="usbAddr">
|
|
<data type="string">
|
|
<param name="pattern">(0x)?[0-9a-fA-F]{1,3}</param>
|
|
</data>
|
|
</define>
|
|
<define name="pciDomain">
|
|
<data type="string">
|
|
<param name="pattern">(0x)?[0-9a-fA-F]{1,4}</param>
|
|
</data>
|
|
</define>
|
|
<define name="pciBus">
|
|
<data type="string">
|
|
<param name="pattern">(0x)?[0-9a-fA-F]{1,2}</param>
|
|
</data>
|
|
</define>
|
|
<define name="pciSlot">
|
|
<data type="string">
|
|
<param name="pattern">(0x)?[0-1]?[0-9a-fA-F]</param>
|
|
</data>
|
|
</define>
|
|
<define name="pciFunc">
|
|
<data type="string">
|
|
<param name="pattern">(0x)?[0-7]</param>
|
|
</data>
|
|
</define>
|
|
<define name="driveController">
|
|
<data type="string">
|
|
<param name="pattern">[0-9]{1,2}</param>
|
|
</data>
|
|
</define>
|
|
<define name="driveBus">
|
|
<data type="string">
|
|
<param name="pattern">[0-9]{1,2}</param>
|
|
</data>
|
|
</define>
|
|
<define name="driveUnit">
|
|
<data type="string">
|
|
<param name="pattern">[0-9]{1,2}</param>
|
|
</data>
|
|
</define>
|
|
<define name="featureName">
|
|
<data type="string">
|
|
<param name='pattern'>[a-zA-Z0-9\-_]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="timeDelta">
|
|
<data type="string">
|
|
<param name="pattern">(-|\+)?[0-9]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="timeZone">
|
|
<data type="string">
|
|
<param name="pattern">[a-zA-Z0-9_\.\+\-/]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="filter-param-name">
|
|
<data type="string">
|
|
<param name="pattern">[a-zA-Z0-9_]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="filter-param-value">
|
|
<data type="string">
|
|
<param name="pattern">[a-zA-Z0-9_\.:]+</param>
|
|
</data>
|
|
</define>
|
|
<define name="uint8range">
|
|
<choice>
|
|
<data type="string">
|
|
<param name="pattern">0x[0-9a-fA-F]{1,2}</param>
|
|
</data>
|
|
<data type="int">
|
|
<param name="minInclusive">0</param>
|
|
<param name="maxInclusive">255</param>
|
|
</data>
|
|
</choice>
|
|
</define>
|
|
<define name="uint24range">
|
|
<choice>
|
|
<data type="string">
|
|
<param name="pattern">0x[0-9a-fA-F]{1,6}</param>
|
|
</data>
|
|
<data type="int">
|
|
<param name="minInclusive">0</param>
|
|
<param name="maxInclusive">16777215</param>
|
|
</data>
|
|
</choice>
|
|
</define>
|
|
<define name="virtualPortProfileID">
|
|
<data type="string">
|
|
<param name="maxLength">39</param>
|
|
</data>
|
|
</define>
|
|
</grammar>
|