External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-11-03 11:51:11 +00:00
Code Issues Packages Projects Releases Wiki Activity
acca913493
libvirt/daemon/Makefile.am
Laine Stump 00e9d6071b build: add $(prefix) to SYSTEMD_UNIT_DIR 
I noticed this problem when adding systemd support to netcf, because I
setup the configure.ac to automatically prefer using systemd over
initscripts when possible - although I had copied the
install-data-local target from the example of libvirt's
"libvirt-guests" service more or less verbatim, "make distcheck" would
fail because it was trying to install the service file directly into
/lib/systemd/system rather than into
/home/user/some/unimportant/name/lib/systemd/system.

This is caused by the install/uninstall rules for the systemd unit
files relying on $(DESTDIR) pointing the installed files to the right
place, but in reality $(DESTDIR) is empty during this part of make
distcheck - it instead sets $(prefix) with the toplevel directory used
for its test build/install/uninstall cycle.

(This problem hasn't been seen when running "make distcheck" in
libvirt because libvirt will never build/install systemd support
unless explicitly told to do so on the configure commandline, and
"make distcheck" doesn't put the "--with-initscript=..." option on the
configure commandline.)

I verified that the same problem does exist in libvirt by modifying
libvirt's configure.ac to set:

  init_systemd=yes
  with_init_script=systemd+redhat

This forces a build/install of the systemd unit files during
distcheck, which yields an error like this:

/usr/bin/install -c -m 644 virtlockd.service \
  /lib/systemd/system/
libtool: install: warning: relinking `libvirt-qemu.la'
/usr/bin/install: cannot remove '/lib/systemd/system/virtlockd.service': Permission denied
make[4]: *** [install-systemd] Error 1

After adding $(prefix) to all the definitions of SYSTEMD_UNIT_DIR,
make distcheck now completes successfully with the modified
configure.ac, and the above lines change to something like this:

/usr/bin/install -c -m 644 virtlockd.service \
  /home/laine/devel/libvirt/libvirt-1.2.1/_inst/lib/systemd/system/
2014-01-21 13:19:46 +02:00

473 lines
14 KiB
Makefile
Raw Blame History

## Process this file with automake to produce Makefile.in
## Copyright (C) 2005-2014 Red Hat, Inc.
##
## This library is free software; you can redistribute it and/or
## modify it under the terms of the GNU Lesser General Public
## License as published by the Free Software Foundation; either
## version 2.1 of the License, or (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
## Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public
## License along with this library. If not, see
## <http://www.gnu.org/licenses/>.
INCLUDES = \
-I$(top_builddir)/gnulib/lib -I$(top_srcdir)/gnulib/lib \
-I$(top_srcdir) \
-I$(top_builddir)/include -I$(top_srcdir)/include \
-I$(top_builddir)/src -I$(top_srcdir)/src \
-I$(top_srcdir)/src/util \
-I$(top_srcdir)/src/conf \
-I$(top_srcdir)/src/rpc \
-I$(top_srcdir)/src/remote \
-I$(top_srcdir)/src/access \
$(GETTEXT_CPPFLAGS)
CLEANFILES =
DAEMON_GENERATED = \
remote_dispatch.h \
lxc_dispatch.h \
qemu_dispatch.h \
$(NULL)
DAEMON_SOURCES = \
libvirtd.c libvirtd.h \
remote.c remote.h \
stream.c stream.h \
$(DAEMON_GENERATED)
LIBVIRTD_CONF_SOURCES = libvirtd-config.c libvirtd-config.h
DISTCLEANFILES =
EXTRA_DIST = \
remote_dispatch.h \
lxc_dispatch.h \
qemu_dispatch.h \
libvirtd.conf \
libvirtd.init.in \
libvirtd.upstart \
libvirtd.policy.in \
libvirtd.sasl \
libvirtd.service.in \
libvirtd.sysconf \
libvirtd.sysctl \
libvirtd.aug \
libvirtd.logrotate.in \
libvirtd.qemu.logrotate.in \
libvirtd.lxc.logrotate.in \
libvirtd.uml.logrotate.in \
test_libvirtd.aug.in \
THREADS.txt \
libvirtd.pod.in \
libvirtd.8.in \
$(DAEMON_SOURCES) \
$(LIBVIRTD_CONF_SOURCES) \
$(NULL)
BUILT_SOURCES =
REMOTE_PROTOCOL = $(top_srcdir)/src/remote/remote_protocol.x
LXC_PROTOCOL = $(top_srcdir)/src/remote/lxc_protocol.x
QEMU_PROTOCOL = $(top_srcdir)/src/remote/qemu_protocol.x
remote_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
$(REMOTE_PROTOCOL)
$(AM_V_GEN)$(PERL) -w $(srcdir)/../src/rpc/gendispatch.pl \
--mode=server remote REMOTE $(REMOTE_PROTOCOL) \
> $(srcdir)/remote_dispatch.h
lxc_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
$(LXC_PROTOCOL)
$(AM_V_GEN)$(PERL) -w $(srcdir)/../src/rpc/gendispatch.pl \
--mode=server lxc LXC $(LXC_PROTOCOL) \
> $(srcdir)/lxc_dispatch.h
qemu_dispatch.h: $(srcdir)/../src/rpc/gendispatch.pl \
$(QEMU_PROTOCOL)
$(AM_V_GEN)$(PERL) -w $(srcdir)/../src/rpc/gendispatch.pl \
--mode=server qemu QEMU $(QEMU_PROTOCOL) \
> $(srcdir)/qemu_dispatch.h
if WITH_LIBVIRTD
# Build a convenience library, for reuse in tests/libvirtdconftest
noinst_LTLIBRARIES = libvirtd_conf.la
libvirtd_conf_la_SOURCES = $(LIBVIRTD_CONF_SOURCES)
libvirtd_conf_la_CFLAGS = \
$(LIBXML_CFLAGS) \
$(XDR_CFLAGS) \
$(WARN_CFLAGS) $(PIE_CFLAGS) \
$(COVERAGE_CFLAGS) \
$(NULL)
libvirtd_conf_la_LDFLAGS = \
$(RELRO_LDFLAGS) \
$(PIE_LDFLAGS) \
$(COVERAGE_LDFLAGS) \
$(NO_INDIRECT_LDFLAGS) \
$(NULL)
libvirtd_conf_la_LIBADD = $(LIBXML_LIBS)
man8_MANS = libvirtd.8
sbin_PROGRAMS = libvirtd
confdir = $(sysconfdir)/libvirt/
conf_DATA = libvirtd.conf
augeasdir = $(datadir)/augeas/lenses
augeas_DATA = libvirtd.aug
augeastestsdir = $(datadir)/augeas/lenses/tests
augeastests_DATA = test_libvirtd.aug
CLEANFILES += test_libvirtd.aug
libvirtd.8: $(srcdir)/libvirtd.8.in
$(AM_V_GEN)sed \
-e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
libvirtd_SOURCES = $(DAEMON_SOURCES)
#-D_XOPEN_SOURCE=600 -D_XOPEN_SOURCE_EXTENDED=1 -D_POSIX_C_SOURCE=199506L
libvirtd_CFLAGS = \
$(LIBXML_CFLAGS) $(GNUTLS_CFLAGS) $(SASL_CFLAGS) \
$(XDR_CFLAGS) $(POLKIT_CFLAGS) $(DBUS_CFLAGS) $(LIBNL_CFLAGS) \
$(WARN_CFLAGS) $(PIE_CFLAGS) \
$(COVERAGE_CFLAGS) \
-DQEMUD_PID_FILE="\"$(QEMUD_PID_FILE)\""
libvirtd_LDFLAGS = \
$(RELRO_LDFLAGS) \
$(PIE_LDFLAGS) \
$(COVERAGE_LDFLAGS) \
$(NO_INDIRECT_LDFLAGS) \
$(NULL)
libvirtd_LDADD = \
$(LIBXML_LIBS) \
$(GNUTLS_LIBS) \
$(SASL_LIBS) \
$(DBUS_LIBS) \
$(POLKIT_LIBS) \
$(LIBNL_LIBS)
if WITH_DTRACE_PROBES
libvirtd_LDADD += ../src/libvirt_probes.lo
endif WITH_DTRACE_PROBES
libvirtd_LDADD += \
libvirtd_conf.la \
../src/libvirt-lxc.la \
../src/libvirt-qemu.la \
../src/libvirt_driver_remote.la \
$(NULL)
if ! WITH_DRIVER_MODULES
if WITH_QEMU
libvirtd_LDADD += ../src/libvirt_driver_qemu.la
if WITH_DTRACE_PROBES
libvirtd_LDADD += ../src/libvirt_qemu_probes.lo
endif WITH_DTRACE_PROBES
endif WITH_QEMU
if WITH_LXC
libvirtd_LDADD += ../src/libvirt_driver_lxc.la
endif WITH_LXC
if WITH_XEN
libvirtd_LDADD += ../src/libvirt_driver_xen.la
endif WITH_XEN
if WITH_LIBXL
libvirtd_LDADD += ../src/libvirt_driver_libxl.la
endif WITH_LIBXL
if WITH_UML
libvirtd_LDADD += ../src/libvirt_driver_uml.la
endif WITH_UML
if WITH_VBOX
libvirtd_LDADD += ../src/libvirt_driver_vbox.la
endif WITH_VBOX
if WITH_STORAGE
libvirtd_LDADD += ../src/libvirt_driver_storage.la
endif WITH_STORAGE
if WITH_NETWORK
libvirtd_LDADD += ../src/libvirt_driver_network.la
endif WITH_NETWORK
if WITH_INTERFACE
libvirtd_LDADD += ../src/libvirt_driver_interface.la
endif WITH_INTERFACE
if WITH_NODE_DEVICES
libvirtd_LDADD += ../src/libvirt_driver_nodedev.la
endif WITH_NODE_DEVICES
if WITH_SECRETS
libvirtd_LDADD += ../src/libvirt_driver_secret.la
endif WITH_SECRETS
if WITH_NWFILTER
libvirtd_LDADD += ../src/libvirt_driver_nwfilter.la
endif WITH_NWFILTER
endif ! WITH_DRIVER_MODULES
libvirtd_LDADD += ../src/libvirt.la
if WITH_POLKIT
if WITH_POLKIT0
policydir = $(datadir)/PolicyKit/policy
policyauth = auth_admin_keep_session
else ! WITH_POLKIT0
policydir = $(datadir)/polkit-1/actions
policyauth = auth_admin_keep
endif ! WITH_POLKIT0
endif WITH_POLKIT
libvirtd.policy: libvirtd.policy.in $(top_builddir)/config.status
$(AM_V_GEN) sed \
-e 's|[@]authaction[@]|$(policyauth)|g' \
< $< > $@-t && \
mv $@-t $@
BUILT_SOURCES += libvirtd.policy
install-data-local: install-init-redhat install-init-systemd \
install-init-upstart \
install-data-sasl install-data-polkit \
install-logrotate install-sysctl
$(MKDIR_P) $(DESTDIR)$(localstatedir)/log/libvirt \
$(DESTDIR)$(localstatedir)/run/libvirt \
$(DESTDIR)$(localstatedir)/lib/libvirt
uninstall-local:: uninstall-init-redhat uninstall-init-systemd \
uninstall-init-upstart \
uninstall-data-sasl uninstall-data-polkit \
uninstall-logrotate uninstall-sysctl
rmdir $(DESTDIR)$(localstatedir)/log/libvirt || :
rmdir $(DESTDIR)$(localstatedir)/run/libvirt || :
rmdir $(DESTDIR)$(localstatedir)/lib/libvirt || :
if WITH_POLKIT
install-data-polkit::
$(MKDIR_P) $(DESTDIR)$(policydir)
$(INSTALL_DATA) libvirtd.policy $(DESTDIR)$(policydir)/org.libvirt.unix.policy
uninstall-data-polkit::
rm -f $(DESTDIR)$(policydir)/org.libvirt.unix.policy
rmdir $(DESTDIR)$(policydir) || :
else ! WITH_POLKIT
install-data-polkit::
uninstall-data-polkit::
endif ! WITH_POLKIT
remote.c: $(DAEMON_GENERATED)
remote.h: $(DAEMON_GENERATED)
LOGROTATE_CONFS = libvirtd.qemu.logrotate libvirtd.lxc.logrotate \
libvirtd.uml.logrotate libvirtd.logrotate
BUILT_SOURCES += $(LOGROTATE_CONFS)
libvirtd.logrotate: libvirtd.logrotate.in
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
libvirtd.qemu.logrotate: libvirtd.qemu.logrotate.in
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
libvirtd.lxc.logrotate: libvirtd.lxc.logrotate.in
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
libvirtd.uml.logrotate: libvirtd.uml.logrotate.in
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
< $< > $@-t && \
mv $@-t $@
install-logrotate: $(LOGROTATE_CONFS)
$(MKDIR_P) $(DESTDIR)$(localstatedir)/log/libvirt/qemu/ \
$(DESTDIR)$(localstatedir)/log/libvirt/lxc/ \
$(DESTDIR)$(localstatedir)/log/libvirt/uml/ \
$(DESTDIR)$(sysconfdir)/logrotate.d/
$(INSTALL_DATA) libvirtd.logrotate \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd
$(INSTALL_DATA) libvirtd.qemu.logrotate \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.qemu
$(INSTALL_DATA) libvirtd.lxc.logrotate \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.lxc
$(INSTALL_DATA) libvirtd.uml.logrotate \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.uml
uninstall-logrotate:
rm -f $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.qemu \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.lxc \
$(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.uml
rmdir $(DESTDIR)$(localstatedir)/log/libvirt/qemu || :
rmdir $(DESTDIR)$(localstatedir)/log/libvirt/lxc || :
rmdir $(DESTDIR)$(localstatedir)/log/libvirt/uml || :
rmdir $(DESTDIR)$(sysconfdir)/logrotate.d || :
install-sysconfig:
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sysconfig
$(INSTALL_DATA) $(srcdir)/libvirtd.sysconf \
$(DESTDIR)$(sysconfdir)/sysconfig/libvirtd
uninstall-sysconfig:
rm -f $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd
rmdir $(DESTDIR)$(sysconfdir)/sysconfig || :
if WITH_SYSCTL
# Use $(prefix)/lib rather than $(libdir), since man sysctl.d insists on
# /usr/lib/sysctl.d/ even when libdir is /usr/lib64
install-sysctl:
$(MKDIR_P) $(DESTDIR)$(prefix)/lib/sysctl.d
$(INSTALL_DATA) $(srcdir)/libvirtd.sysctl \
$(DESTDIR)$(prefix)/lib/sysctl.d/libvirtd.conf
uninstall-sysctl:
rm -f $(DESTDIR)$(prefix)/lib/sysctl.d/libvirtd.conf
rmdir $(DESTDIR)$(prefix)/lib/sysctl.d || :
else ! WITH_SYSCTL
install-sysctl:
uninstall-sysctl:
endif ! WITH_SYSCTL
if LIBVIRT_INIT_SCRIPT_RED_HAT
BUILT_SOURCES += libvirtd.init
install-init-redhat: install-sysconfig libvirtd.init
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/rc.d/init.d
$(INSTALL_SCRIPT) libvirtd.init \
$(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd
uninstall-init-redhat: uninstall-sysconfig
rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd
rmdir $(DESTDIR)$(sysconfdir)/rc.d/init.d || :
else ! LIBVIRT_INIT_SCRIPT_RED_HAT
install-init-redhat:
uninstall-init-redhat:
endif ! LIBVIRT_INIT_SCRIPT_RED_HAT
if LIBVIRT_INIT_SCRIPT_UPSTART
install-init-upstart: install-sysconfig
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/event.d
$(INSTALL_SCRIPT) libvirtd.upstart \
$(DESTDIR)$(sysconfdir)/event.d/libvirtd
uninstall-init-upstart: uninstall-sysconfig
rm -f $(DESTDIR)$(sysconfdir)/event.d/libvirtd
rmdir $(DESTDIR)$(sysconfdir)/event.d || :
else ! LIBVIRT_INIT_SCRIPT_UPSTART
install-init-upstart:
uninstall-init-upstart:
endif ! LIBVIRT_INIT_SCRIPT_UPSTART
if LIBVIRT_INIT_SCRIPT_SYSTEMD
SYSTEMD_UNIT_DIR = $(prefix)/lib/systemd/system
BUILT_SOURCES += libvirtd.service
install-init-systemd: install-sysconfig libvirtd.service
$(MKDIR_P) $(DESTDIR)$(SYSTEMD_UNIT_DIR)
$(INSTALL_DATA) libvirtd.service \
$(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirtd.service
uninstall-init-systemd: uninstall-sysconfig
rm -f $(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirtd.service
rmdir $(DESTDIR)$(SYSTEMD_UNIT_DIR) || :
else ! LIBVIRT_INIT_SCRIPT_SYSTEMD
install-init-systemd:
uninstall-init-systemd:
endif ! LIBVIRT_INIT_SCRIPT_SYSTEMD
libvirtd.init: libvirtd.init.in $(top_builddir)/config.status
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
-e 's|[@]sbindir[@]|$(sbindir)|g' \
-e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
< $< > $@-t && \
chmod a+x $@-t && \
mv $@-t $@
libvirtd.service: libvirtd.service.in $(top_builddir)/config.status
$(AM_V_GEN)sed \
-e 's|[@]localstatedir[@]|$(localstatedir)|g' \
-e 's|[@]sbindir[@]|$(sbindir)|g' \
-e 's|[@]sysconfdir[@]|$(sysconfdir)|g' \
< $< > $@-t && \
mv $@-t $@
check-local: check-augeas
AUG_GENTEST = $(PERL) $(top_srcdir)/build-aux/augeas-gentest.pl
test_libvirtd.aug: test_libvirtd.aug.in $(srcdir)/libvirtd.conf
$(AM_V_GEN)$(AUG_GENTEST) $(srcdir)/libvirtd.conf $< $@
check-augeas: test_libvirtd.aug
$(AM_V_GEN)if test -x '$(AUGPARSE)'; then \
'$(AUGPARSE)' -I $(srcdir) test_libvirtd.aug; \
fi
# This must be added last, since functions it provides/replaces
# are used by nearly every other library.
libvirtd_LDADD += ../gnulib/lib/libgnu.la $(LIBSOCKET)
else ! WITH_LIBVIRTD
install-data-local: install-data-sasl
uninstall-local:: uninstall-data-sasl
endif ! WITH_LIBVIRTD
POD2MAN = pod2man -c "Virtualization Support" \
-r "$(PACKAGE)-$(VERSION)" -s 8
$(srcdir)/libvirtd.8.in: libvirtd.pod.in $(top_srcdir)/configure.ac
$(AM_V_GEN)$(POD2MAN) --name LIBVIRTD $< $@ \
&& if grep 'POD ERROR' $@ ; then rm $@; exit 1; fi
# This is needed for clients too, so can't wrap in
# the WITH_LIBVIRTD conditional
if WITH_SASL
install-data-sasl:
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sasl2/
$(INSTALL_DATA) $(srcdir)/libvirtd.sasl \
$(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
uninstall-data-sasl:
rm -f $(DESTDIR)$(sysconfdir)/sasl2/libvirt.conf
rmdir $(DESTDIR)$(sysconfdir)/sasl2/ || :
else ! WITH_SASL
install-data-sasl:
uninstall-data-sasl:
endif ! WITH_SASL
CLEANFILES += $(BUILT_SOURCES) $(man8_MANS)
CLEANFILES += *.cov *.gcov .libs/*.gcda .libs/*.gcno *.gcno *.gcda
MAINTAINERCLEANFILES = $(srcdir)/libvirtd.8.in $(DAEMON_GENERATED)
Reference in New Issue View Git Blame Copy Permalink