libvirt/src/libvirt-host.c
Daniel P. Berrange 32d6c7386d Print hex values with '0x' prefix and octal with '0' in debug messages
Seeing a log message saying 'flags=93' is ambiguous & confusing unless
you happen to know that libvirt always prints flags as hex.  Change our
debug messages so that they always add a '0x' prefix when printing flags,
and '0' prefix when printing mode. A few other misc places gain a '0x'
prefix in error messages too.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-09-25 13:34:53 +01:00

1485 lines
43 KiB
C

/*
* libvirt-host.c: entry points for vir{Connect,Node}Ptr APIs
*
* Copyright (C) 2006-2015 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library. If not, see
* <http://www.gnu.org/licenses/>.
*/
#include <config.h>
#include <sys/stat.h>
#include "datatypes.h"
#include "viralloc.h"
#include "virlog.h"
#include "virtypedparam.h"
VIR_LOG_INIT("libvirt.host");
#define VIR_FROM_THIS VIR_FROM_DOMAIN
/**
* virConnectRef:
* @conn: the connection to hold a reference on
*
* Increment the reference count on the connection. For each
* additional call to this method, there shall be a corresponding
* call to virConnectClose to release the reference count, once
* the caller no longer needs the reference to this object.
*
* This method is typically useful for applications where multiple
* threads are using a connection, and it is required that the
* connection remain open until all threads have finished using
* it. ie, each new thread using a connection would increment
* the reference count.
*
* Returns 0 in case of success, -1 in case of failure
*/
int
virConnectRef(virConnectPtr conn)
{
VIR_DEBUG("conn=%p refs=%d", conn, conn ? conn->object.parent.u.s.refs : 0);
virResetLastError();
virCheckConnectReturn(conn, -1);
virObjectRef(conn);
return 0;
}
/*
* Not for public use. This function is part of the internal
* implementation of driver features in the remote case.
*/
int
virConnectSupportsFeature(virConnectPtr conn, int feature)
{
int ret;
VIR_DEBUG("conn=%p, feature=%d", conn, feature);
virResetLastError();
virCheckConnectReturn(conn, -1);
if (!conn->driver->connectSupportsFeature)
ret = 0;
else
ret = conn->driver->connectSupportsFeature(conn, feature);
if (ret < 0)
virDispatchError(conn);
return ret;
}
/**
* virConnectGetType:
* @conn: pointer to the hypervisor connection
*
* Get the name of the Hypervisor driver used. This is merely the driver
* name; for example, both KVM and QEMU guests are serviced by the
* driver for the qemu:// URI, so a return of "QEMU" does not indicate
* whether KVM acceleration is present. For more details about the
* hypervisor, use virConnectGetCapabilities().
*
* Returns NULL in case of error, a static zero terminated string otherwise.
*
* See also:
* http://www.redhat.com/archives/libvir-list/2007-February/msg00096.html
*/
const char *
virConnectGetType(virConnectPtr conn)
{
const char *ret;
VIR_DEBUG("conn=%p", conn);
virResetLastError();
virCheckConnectReturn(conn, NULL);
if (conn->driver->connectGetType) {
ret = conn->driver->connectGetType(conn);
if (ret) return ret;
}
return conn->driver->name;
}
/**
* virConnectGetVersion:
* @conn: pointer to the hypervisor connection
* @hvVer: return value for the version of the running hypervisor (OUT)
*
* Get the version level of the Hypervisor running. This may work only with
* hypervisor call, i.e. with privileged access to the hypervisor, not
* with a Read-Only connection.
*
* Returns -1 in case of error, 0 otherwise. if the version can't be
* extracted by lack of capacities returns 0 and @hvVer is 0, otherwise
* @hvVer value is major * 1,000,000 + minor * 1,000 + release
*/
int
virConnectGetVersion(virConnectPtr conn, unsigned long *hvVer)
{
VIR_DEBUG("conn=%p, hvVer=%p", conn, hvVer);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckNonNullArgGoto(hvVer, error);
if (conn->driver->connectGetVersion) {
int ret = conn->driver->connectGetVersion(conn, hvVer);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virConnectGetLibVersion:
* @conn: pointer to the hypervisor connection
* @libVer: returns the libvirt library version used on the connection (OUT)
*
* Provides @libVer, which is the version of libvirt used by the
* daemon running on the @conn host
*
* Returns -1 in case of failure, 0 otherwise, and values for @libVer have
* the format major * 1,000,000 + minor * 1,000 + release.
*/
int
virConnectGetLibVersion(virConnectPtr conn, unsigned long *libVer)
{
int ret = -1;
VIR_DEBUG("conn=%p, libVir=%p", conn, libVer);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckNonNullArgGoto(libVer, error);
if (conn->driver->connectGetLibVersion) {
ret = conn->driver->connectGetLibVersion(conn, libVer);
if (ret < 0)
goto error;
return ret;
}
*libVer = LIBVIR_VERSION_NUMBER;
return 0;
error:
virDispatchError(conn);
return ret;
}
/**
* virConnectGetHostname:
* @conn: pointer to a hypervisor connection
*
* This returns a system hostname on which the hypervisor is
* running (based on the result of the gethostname system call, but
* possibly expanded to a fully-qualified domain name via getaddrinfo).
* If we are connected to a remote system, then this returns the
* hostname of the remote system.
*
* Returns the hostname which must be freed by the caller, or
* NULL if there was an error.
*/
char *
virConnectGetHostname(virConnectPtr conn)
{
VIR_DEBUG("conn=%p", conn);
virResetLastError();
virCheckConnectReturn(conn, NULL);
if (conn->driver->connectGetHostname) {
char *ret = conn->driver->connectGetHostname(conn);
if (!ret)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return NULL;
}
/**
* virConnectGetURI:
* @conn: pointer to a hypervisor connection
*
* This returns the URI (name) of the hypervisor connection.
* Normally this is the same as or similar to the string passed
* to the virConnectOpen/virConnectOpenReadOnly call, but
* the driver may make the URI canonical. If name == NULL
* was passed to virConnectOpen, then the driver will return
* a non-NULL URI which can be used to connect to the same
* hypervisor later.
*
* Returns the URI string which must be freed by the caller, or
* NULL if there was an error.
*/
char *
virConnectGetURI(virConnectPtr conn)
{
char *name;
VIR_DEBUG("conn=%p", conn);
virResetLastError();
virCheckConnectReturn(conn, NULL);
if (!(name = virURIFormat(conn->uri)))
goto error;
return name;
error:
virDispatchError(conn);
return NULL;
}
/**
* virConnectGetSysinfo:
* @conn: pointer to a hypervisor connection
* @flags: extra flags; not used yet, so callers should always pass 0
*
* This returns the XML description of the sysinfo details for the
* host on which the hypervisor is running, in the same format as the
* <sysinfo> element of a domain XML. This information is generally
* available only for hypervisors running with root privileges.
*
* Returns the XML string which must be freed by the caller, or
* NULL if there was an error.
*/
char *
virConnectGetSysinfo(virConnectPtr conn, unsigned int flags)
{
VIR_DEBUG("conn=%p, flags=0x%x", conn, flags);
virResetLastError();
virCheckConnectReturn(conn, NULL);
if (conn->driver->connectGetSysinfo) {
char *ret = conn->driver->connectGetSysinfo(conn, flags);
if (!ret)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return NULL;
}
/**
* virConnectGetMaxVcpus:
* @conn: pointer to the hypervisor connection
* @type: value of the 'type' attribute in the <domain> element
*
* Provides the maximum number of virtual CPUs supported for a guest VM of a
* specific type. The 'type' parameter here corresponds to the 'type'
* attribute in the <domain> element of the XML. This API doesn't take emulator
* limits into consideration, hence the returned value is not guaranteed to be
* usable. It is recommended to use virConnectGetDomainCapabilities() and look
* for "<vcpu max='...'>" in its output instead.
*
* Returns the maximum of virtual CPU or -1 in case of error.
*/
int
virConnectGetMaxVcpus(virConnectPtr conn,
const char *type)
{
VIR_DEBUG("conn=%p, type=%s", conn, NULLSTR(type));
virResetLastError();
virCheckConnectReturn(conn, -1);
if (conn->driver->connectGetMaxVcpus) {
int ret = conn->driver->connectGetMaxVcpus(conn, type);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virNodeGetInfo:
* @conn: pointer to the hypervisor connection
* @info: pointer to a virNodeInfo structure allocated by the user
*
* Extract hardware information about the node.
*
* Returns 0 in case of success and -1 in case of failure.
*/
int
virNodeGetInfo(virConnectPtr conn, virNodeInfoPtr info)
{
VIR_DEBUG("conn=%p, info=%p", conn, info);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckNonNullArgGoto(info, error);
if (conn->driver->nodeGetInfo) {
int ret;
ret = conn->driver->nodeGetInfo(conn, info);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virConnectGetCapabilities:
* @conn: pointer to the hypervisor connection
*
* Provides capabilities of the hypervisor / driver.
*
* Returns NULL in case of error, or an XML string
* defining the capabilities.
* The client must free the returned string after use.
*/
char *
virConnectGetCapabilities(virConnectPtr conn)
{
VIR_DEBUG("conn=%p", conn);
virResetLastError();
virCheckConnectReturn(conn, NULL);
if (conn->driver->connectGetCapabilities) {
char *ret;
ret = conn->driver->connectGetCapabilities(conn);
if (!ret)
goto error;
VIR_DEBUG("conn=%p ret=%s", conn, ret);
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return NULL;
}
/**
* virNodeGetCPUStats:
* @conn: pointer to the hypervisor connection.
* @cpuNum: number of node cpu. (VIR_NODE_CPU_STATS_ALL_CPUS means total cpu
* statistics)
* @params: pointer to node cpu time parameter objects
* @nparams: number of node cpu time parameter (this value should be same or
* less than the number of parameters supported)
* @flags: extra flags; not used yet, so callers should always pass 0
*
* This function provides individual cpu statistics of the node.
* If you want to get total cpu statistics of the node, you must specify
* VIR_NODE_CPU_STATS_ALL_CPUS to @cpuNum.
* The @params array will be filled with the values equal to the number of
* parameters suggested by @nparams
*
* As the value of @nparams is dynamic, call the API setting @nparams to 0 and
* @params as NULL, the API returns the number of parameters supported by the
* HV by updating @nparams on SUCCESS. The caller should then allocate @params
* array, i.e. (sizeof(@virNodeCPUStats) * @nparams) bytes and call
* the API again.
*
* Here is a sample code snippet:
*
* if (virNodeGetCPUStats(conn, cpuNum, NULL, &nparams, 0) == 0 &&
* nparams != 0) {
* if ((params = malloc(sizeof(virNodeCPUStats) * nparams)) == NULL)
* goto error;
* memset(params, 0, sizeof(virNodeCPUStats) * nparams);
* if (virNodeGetCPUStats(conn, cpuNum, params, &nparams, 0))
* goto error;
* }
*
* This function doesn't require privileged access to the hypervisor.
* This function expects the caller to allocate the @params.
*
* CPU time Statistics:
*
* VIR_NODE_CPU_STATS_KERNEL:
* The cumulative CPU time which spends by kernel,
* when the node booting up.(nanoseconds)
* VIR_NODE_CPU_STATS_USER:
* The cumulative CPU time which spends by user processes,
* when the node booting up.(nanoseconds)
* VIR_NODE_CPU_STATS_IDLE:
* The cumulative idle CPU time, when the node booting up.(nanoseconds)
* VIR_NODE_CPU_STATS_IOWAIT:
* The cumulative I/O wait CPU time, when the node booting up.(nanoseconds)
* VIR_NODE_CPU_STATS_UTILIZATION:
* The CPU utilization. The usage value is in percent and 100%
* represents all CPUs on the server.
*
* Returns -1 in case of error, 0 in case of success.
*/
int
virNodeGetCPUStats(virConnectPtr conn,
int cpuNum,
virNodeCPUStatsPtr params,
int *nparams, unsigned int flags)
{
VIR_DEBUG("conn=%p, cpuNum=%d, params=%p, nparams=%d, flags=0x%x",
conn, cpuNum, params, nparams ? *nparams : -1, flags);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckNonNullArgGoto(nparams, error);
virCheckNonNegativeArgGoto(*nparams, error);
if (cpuNum < 0 && cpuNum != VIR_NODE_CPU_STATS_ALL_CPUS) {
virReportInvalidArg(cpuNum,
_("cpuNum in %s only accepts %d as a negative "
"value"),
__FUNCTION__, VIR_NODE_CPU_STATS_ALL_CPUS);
goto error;
}
if (conn->driver->nodeGetCPUStats) {
int ret;
ret = conn->driver->nodeGetCPUStats(conn, cpuNum, params, nparams, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virNodeGetMemoryStats:
* @conn: pointer to the hypervisor connection.
* @cellNum: number of node cell. (VIR_NODE_MEMORY_STATS_ALL_CELLS means total
* cell statistics)
* @params: pointer to node memory stats objects
* @nparams: number of node memory stats (this value should be same or
* less than the number of stats supported)
* @flags: extra flags; not used yet, so callers should always pass 0
*
* This function provides memory stats of the node.
* If you want to get total memory statistics of the node, you must specify
* VIR_NODE_MEMORY_STATS_ALL_CELLS to @cellNum.
* The @params array will be filled with the values equal to the number of
* stats suggested by @nparams
*
* As the value of @nparams is dynamic, call the API setting @nparams to 0 and
* @params as NULL, the API returns the number of parameters supported by the
* HV by updating @nparams on SUCCESS. The caller should then allocate @params
* array, i.e. (sizeof(@virNodeMemoryStats) * @nparams) bytes and call
* the API again.
*
* Here is the sample code snippet:
*
* if (virNodeGetMemoryStats(conn, cellNum, NULL, &nparams, 0) == 0 &&
* nparams != 0) {
* if ((params = malloc(sizeof(virNodeMemoryStats) * nparams)) == NULL)
* goto error;
* memset(params, cellNum, 0, sizeof(virNodeMemoryStats) * nparams);
* if (virNodeGetMemoryStats(conn, params, &nparams, 0))
* goto error;
* }
*
* This function doesn't require privileged access to the hypervisor.
* This function expects the caller to allocate the @params.
*
* Memory Stats:
*
* VIR_NODE_MEMORY_STATS_TOTAL:
* The total memory usage.(KB)
* VIR_NODE_MEMORY_STATS_FREE:
* The free memory usage.(KB)
* On linux, this usage includes buffers and cached.
* VIR_NODE_MEMORY_STATS_BUFFERS:
* The buffers memory usage.(KB)
* VIR_NODE_MEMORY_STATS_CACHED:
* The cached memory usage.(KB)
*
* Returns -1 in case of error, 0 in case of success.
*/
int
virNodeGetMemoryStats(virConnectPtr conn,
int cellNum,
virNodeMemoryStatsPtr params,
int *nparams, unsigned int flags)
{
VIR_DEBUG("conn=%p, cellNum=%d, params=%p, nparams=%d, flags=0x%x",
conn, cellNum, params, nparams ? *nparams : -1, flags);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckNonNullArgGoto(nparams, error);
virCheckNonNegativeArgGoto(*nparams, error);
if (cellNum < 0 && cellNum != VIR_NODE_MEMORY_STATS_ALL_CELLS) {
virReportInvalidArg(cpuNum,
_("cellNum in %s only accepts %d as a negative "
"value"),
__FUNCTION__, VIR_NODE_MEMORY_STATS_ALL_CELLS);
goto error;
}
if (conn->driver->nodeGetMemoryStats) {
int ret;
ret = conn->driver->nodeGetMemoryStats(conn, cellNum, params, nparams, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virNodeGetFreeMemory:
* @conn: pointer to the hypervisor connection
*
* provides the free memory available on the Node
* Note: most libvirt APIs provide memory sizes in kibibytes, but in this
* function the returned value is in bytes. Divide by 1024 as necessary.
*
* Returns the available free memory in bytes or 0 in case of error
*/
unsigned long long
virNodeGetFreeMemory(virConnectPtr conn)
{
VIR_DEBUG("conn=%p", conn);
virResetLastError();
virCheckConnectReturn(conn, 0);
if (conn->driver->nodeGetFreeMemory) {
unsigned long long ret;
ret = conn->driver->nodeGetFreeMemory(conn);
if (ret == 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return 0;
}
/**
* virNodeSuspendForDuration:
* @conn: pointer to the hypervisor connection
* @target: the state to which the host must be suspended to,
* such as: VIR_NODE_SUSPEND_TARGET_MEM (Suspend-to-RAM)
* VIR_NODE_SUSPEND_TARGET_DISK (Suspend-to-Disk)
* VIR_NODE_SUSPEND_TARGET_HYBRID (Hybrid-Suspend,
* which is a combination of the former modes).
* @duration: the time duration in seconds for which the host
* has to be suspended
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Attempt to suspend the node (host machine) for the given duration of
* time in the specified state (Suspend-to-RAM, Suspend-to-Disk or
* Hybrid-Suspend). Schedule the node's Real-Time-Clock interrupt to
* resume the node after the duration is complete.
*
* Returns 0 on success (i.e., the node will be suspended after a short
* delay), -1 on failure (the operation is not supported, or an attempted
* suspend is already underway).
*/
int
virNodeSuspendForDuration(virConnectPtr conn,
unsigned int target,
unsigned long long duration,
unsigned int flags)
{
VIR_DEBUG("conn=%p, target=%d, duration=%lld, flags=0x%x",
conn, target, duration, flags);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckReadOnlyGoto(conn->flags, error);
if (conn->driver->nodeSuspendForDuration) {
int ret;
ret = conn->driver->nodeSuspendForDuration(conn, target,
duration, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/*
* virNodeGetMemoryParameters:
* @conn: pointer to the hypervisor connection
* @params: pointer to memory parameter object
* (return value, allocated by the caller)
* @nparams: pointer to number of memory parameters; input and output
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Get all node memory parameters (parameters unsupported by OS will be
* omitted). On input, @nparams gives the size of the @params array;
* on output, @nparams gives how many slots were filled with parameter
* information, which might be less but will not exceed the input value.
*
* As a special case, calling with @params as NULL and @nparams as 0 on
* input will cause @nparams on output to contain the number of parameters
* supported by the hypervisor. The caller should then allocate @params
* array, i.e. (sizeof(@virTypedParameter) * @nparams) bytes and call the API
* again. See virDomainGetMemoryParameters() for an equivalent usage
* example.
*
* Returns 0 in case of success, and -1 in case of failure.
*/
int
virNodeGetMemoryParameters(virConnectPtr conn,
virTypedParameterPtr params,
int *nparams,
unsigned int flags)
{
VIR_DEBUG("conn=%p, params=%p, nparams=%p, flags=0x%x",
conn, params, nparams, flags);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckNonNullArgGoto(nparams, error);
virCheckNonNegativeArgGoto(*nparams, error);
if (*nparams != 0)
virCheckNonNullArgGoto(params, error);
if (VIR_DRV_SUPPORTS_FEATURE(conn->driver, conn,
VIR_DRV_FEATURE_TYPED_PARAM_STRING))
flags |= VIR_TYPED_PARAM_STRING_OKAY;
if (conn->driver->nodeGetMemoryParameters) {
int ret;
ret = conn->driver->nodeGetMemoryParameters(conn, params,
nparams, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/*
* virNodeSetMemoryParameters:
* @conn: pointer to the hypervisor connection
* @params: pointer to scheduler parameter objects
* @nparams: number of scheduler parameter objects
* (this value can be the same or less than the returned
* value nparams of virDomainGetSchedulerType)
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Change all or a subset of the node memory tunables. The function
* fails if not all of the tunables are supported.
*
* Note that it's not recommended to use this function while the
* outside tuning program is running (such as ksmtuned under Linux),
* as they could change the tunables in parallel, which could cause
* conflicts.
*
* This function may require privileged access to the hypervisor.
*
* Returns 0 in case of success, -1 in case of failure.
*/
int
virNodeSetMemoryParameters(virConnectPtr conn,
virTypedParameterPtr params,
int nparams,
unsigned int flags)
{
VIR_DEBUG("conn=%p, params=%p, nparams=%d, flags=0x%x",
conn, params, nparams, flags);
VIR_TYPED_PARAMS_DEBUG(params, nparams);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckReadOnlyGoto(conn->flags, error);
virCheckNonNullArgGoto(params, error);
virCheckNonNegativeArgGoto(nparams, error);
if (virTypedParameterValidateSet(conn, params, nparams) < 0)
goto error;
if (conn->driver->nodeSetMemoryParameters) {
int ret;
ret = conn->driver->nodeSetMemoryParameters(conn, params,
nparams, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virNodeGetSecurityModel:
* @conn: a connection object
* @secmodel: pointer to a virSecurityModel structure
*
* Extract the security model of a hypervisor. The 'model' field
* in the @secmodel argument may be initialized to the empty
* string if the driver has not activated a security model.
*
* Returns 0 in case of success, -1 in case of failure
*/
int
virNodeGetSecurityModel(virConnectPtr conn, virSecurityModelPtr secmodel)
{
VIR_DEBUG("conn=%p secmodel=%p", conn, secmodel);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckNonNullArgGoto(secmodel, error);
if (conn->driver->nodeGetSecurityModel) {
int ret;
ret = conn->driver->nodeGetSecurityModel(conn, secmodel);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virNodeGetCellsFreeMemory:
* @conn: pointer to the hypervisor connection
* @freeMems: pointer to the array of unsigned long long
* @startCell: index of first cell to return freeMems info on.
* @maxCells: Maximum number of cells for which freeMems information can
* be returned.
*
* This call returns the amount of free memory in one or more NUMA cells.
* The @freeMems array must be allocated by the caller and will be filled
* with the amount of free memory in bytes for each cell requested,
* starting with startCell (in freeMems[0]), up to either
* (startCell + maxCells), or the number of additional cells in the node,
* whichever is smaller.
*
* Returns the number of entries filled in freeMems, or -1 in case of error.
*/
int
virNodeGetCellsFreeMemory(virConnectPtr conn, unsigned long long *freeMems,
int startCell, int maxCells)
{
VIR_DEBUG("conn=%p, freeMems=%p, startCell=%d, maxCells=%d",
conn, freeMems, startCell, maxCells);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckNonNullArgGoto(freeMems, error);
virCheckPositiveArgGoto(maxCells, error);
virCheckNonNegativeArgGoto(startCell, error);
if (conn->driver->nodeGetCellsFreeMemory) {
int ret;
ret = conn->driver->nodeGetCellsFreeMemory(conn, freeMems, startCell, maxCells);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virConnectIsEncrypted:
* @conn: pointer to the connection object
*
* Determine if the connection to the hypervisor is encrypted
*
* Returns 1 if encrypted, 0 if not encrypted, -1 on error
*/
int
virConnectIsEncrypted(virConnectPtr conn)
{
VIR_DEBUG("conn=%p", conn);
virResetLastError();
virCheckConnectReturn(conn, -1);
if (conn->driver->connectIsEncrypted) {
int ret;
ret = conn->driver->connectIsEncrypted(conn);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virConnectIsSecure:
* @conn: pointer to the connection object
*
* Determine if the connection to the hypervisor is secure
*
* A connection will be classed as secure if it is either
* encrypted, or running over a channel which is not exposed
* to eavesdropping (eg a UNIX domain socket, or pipe)
*
* Returns 1 if secure, 0 if not secure, -1 on error
*/
int
virConnectIsSecure(virConnectPtr conn)
{
VIR_DEBUG("conn=%p", conn);
virResetLastError();
virCheckConnectReturn(conn, -1);
if (conn->driver->connectIsSecure) {
int ret;
ret = conn->driver->connectIsSecure(conn);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virConnectCompareCPU:
* @conn: virConnect connection
* @xmlDesc: XML describing the CPU to compare with host CPU
* @flags: bitwise-OR of virConnectCompareCPUFlags
*
* Compares the given CPU description with the host CPU
*
* Returns comparison result according to enum virCPUCompareResult. If
* VIR_CONNECT_COMPARE_CPU_FAIL_INCOMPATIBLE is used and @xmlDesc CPU is
* incompatible with host CPU, this function will return VIR_CPU_COMPARE_ERROR
* (instead of VIR_CPU_COMPARE_INCOMPATIBLE) and the error will use the
* VIR_ERR_CPU_INCOMPATIBLE code with a message providing more details about
* the incompatibility.
*/
int
virConnectCompareCPU(virConnectPtr conn,
const char *xmlDesc,
unsigned int flags)
{
VIR_DEBUG("conn=%p, xmlDesc=%s, flags=0x%x", conn, NULLSTR(xmlDesc), flags);
virResetLastError();
virCheckConnectReturn(conn, VIR_CPU_COMPARE_ERROR);
virCheckNonNullArgGoto(xmlDesc, error);
if (conn->driver->connectCompareCPU) {
int ret;
ret = conn->driver->connectCompareCPU(conn, xmlDesc, flags);
if (ret == VIR_CPU_COMPARE_ERROR)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return VIR_CPU_COMPARE_ERROR;
}
/**
* virConnectGetCPUModelNames:
*
* @conn: virConnect connection
* @arch: Architecture
* @models: Pointer to a variable to store the NULL-terminated array of the
* CPU models supported for the specified architecture. Each element
* and the array itself must be freed by the caller with free. Pass
* NULL if only the list length is needed.
* @flags: extra flags; not used yet, so callers should always pass 0.
*
* Get the list of supported CPU models for a specific architecture.
*
* Returns -1 on error, number of elements in @models on success (0 means
* libvirt accepts any CPU model).
*/
int
virConnectGetCPUModelNames(virConnectPtr conn, const char *arch, char ***models,
unsigned int flags)
{
VIR_DEBUG("conn=%p, arch=%s, models=%p, flags=0x%x",
conn, NULLSTR(arch), models, flags);
virResetLastError();
if (models)
*models = NULL;
virCheckConnectReturn(conn, -1);
virCheckNonNullArgGoto(arch, error);
if (conn->driver->connectGetCPUModelNames) {
int ret;
ret = conn->driver->connectGetCPUModelNames(conn, arch, models, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virConnectBaselineCPU:
*
* @conn: virConnect connection
* @xmlCPUs: array of XML descriptions of host CPUs
* @ncpus: number of CPUs in xmlCPUs
* @flags: bitwise-OR of virConnectBaselineCPUFlags
*
* Computes the most feature-rich CPU which is compatible with all given
* host CPUs.
*
* If @flags includes VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES then libvirt
* will explicitly list all CPU features that are part of the host CPU,
* without this flag features that are part of the CPU model will not be
* listed.
*
* If @flags includes VIR_CONNECT_BASELINE_CPU_MIGRATABLE, the resulting
* CPU will not include features that block migration.
*
* Returns XML description of the computed CPU (caller frees) or NULL on error.
*/
char *
virConnectBaselineCPU(virConnectPtr conn,
const char **xmlCPUs,
unsigned int ncpus,
unsigned int flags)
{
size_t i;
VIR_DEBUG("conn=%p, xmlCPUs=%p, ncpus=%u, flags=0x%x",
conn, xmlCPUs, ncpus, flags);
if (xmlCPUs) {
for (i = 0; i < ncpus; i++)
VIR_DEBUG("xmlCPUs[%zu]=%s", i, NULLSTR(xmlCPUs[i]));
}
virResetLastError();
virCheckConnectReturn(conn, NULL);
virCheckNonNullArgGoto(xmlCPUs, error);
if (conn->driver->connectBaselineCPU) {
char *cpu;
cpu = conn->driver->connectBaselineCPU(conn, xmlCPUs, ncpus, flags);
if (!cpu)
goto error;
return cpu;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return NULL;
}
/**
* virConnectSetKeepAlive:
* @conn: pointer to a hypervisor connection
* @interval: number of seconds of inactivity before a keepalive message is sent
* @count: number of messages that can be sent in a row
*
* Start sending keepalive messages after @interval seconds of inactivity and
* consider the connection to be broken when no response is received after
* @count keepalive messages sent in a row. In other words, sending count + 1
* keepalive message results in closing the connection. When @interval is
* <= 0, no keepalive messages will be sent. When @count is 0, the connection
* will be automatically closed after @interval seconds of inactivity without
* sending any keepalive messages.
*
* Note: The client has to implement and run an event loop with
* virEventRegisterImpl() or virEventRegisterDefaultImpl() to be able to
* use keepalive messages. Failure to do so may result in connections
* being closed unexpectedly.
*
* Note: This API function controls only keepalive messages sent by the client.
* If the server is configured to use keepalive you still need to run the event
* loop to respond to them, even if you disable keepalives by this function.
*
* Returns -1 on error, 0 on success, 1 when remote party doesn't support
* keepalive messages.
*/
int
virConnectSetKeepAlive(virConnectPtr conn,
int interval,
unsigned int count)
{
int ret = -1;
VIR_DEBUG("conn=%p, interval=%d, count=%u", conn, interval, count);
virResetLastError();
virCheckConnectReturn(conn, -1);
if (conn->driver->connectSetKeepAlive) {
ret = conn->driver->connectSetKeepAlive(conn, interval, count);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virConnectIsAlive:
* @conn: pointer to the connection object
*
* Determine if the connection to the hypervisor is still alive
*
* A connection will be classed as alive if it is either local, or running
* over a channel (TCP or UNIX socket) which is not closed.
*
* Returns 1 if alive, 0 if dead, -1 on error
*/
int
virConnectIsAlive(virConnectPtr conn)
{
VIR_DEBUG("conn=%p", conn);
virResetLastError();
virCheckConnectReturn(conn, -1);
if (conn->driver->connectIsAlive) {
int ret;
ret = conn->driver->connectIsAlive(conn);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virConnectRegisterCloseCallback:
* @conn: pointer to connection object
* @cb: callback to invoke upon close
* @opaque: user data to pass to @cb
* @freecb: callback to free @opaque
*
* Registers a callback to be invoked when the connection
* is closed. This callback is invoked when there is any
* condition that causes the socket connection to the
* hypervisor to be closed.
*
* This function is only applicable to hypervisor drivers
* which maintain a persistent open connection. Drivers
* which open a new connection for every operation will
* not invoke this.
*
* The @freecb must not invoke any other libvirt public
* APIs, since it is not called from a re-entrant safe
* context.
*
* Returns 0 on success, -1 on error
*/
int
virConnectRegisterCloseCallback(virConnectPtr conn,
virConnectCloseFunc cb,
void *opaque,
virFreeCallback freecb)
{
VIR_DEBUG("conn=%p", conn);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckNonNullArgGoto(cb, error);
if (conn->driver->connectRegisterCloseCallback &&
conn->driver->connectRegisterCloseCallback(conn, cb, opaque, freecb) < 0)
goto error;
return 0;
error:
virDispatchError(conn);
return -1;
}
/**
* virConnectUnregisterCloseCallback:
* @conn: pointer to connection object
* @cb: pointer to the current registered callback
*
* Unregisters the callback previously set with the
* virConnectRegisterCloseCallback method. The callback
* will no longer receive notifications when the connection
* closes. If a virFreeCallback was provided at time of
* registration, it will be invoked
*
* Returns 0 on success, -1 on error
*/
int
virConnectUnregisterCloseCallback(virConnectPtr conn,
virConnectCloseFunc cb)
{
VIR_DEBUG("conn=%p", conn);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckNonNullArgGoto(cb, error);
if (conn->driver->connectUnregisterCloseCallback &&
conn->driver->connectUnregisterCloseCallback(conn, cb) < 0)
goto error;
return 0;
error:
virDispatchError(conn);
return -1;
}
/**
* virNodeGetCPUMap:
* @conn: pointer to the hypervisor connection
* @cpumap: optional pointer to a bit map of real CPUs on the host node
* (in 8-bit bytes) (OUT)
* In case of success each bit set to 1 means that corresponding
* CPU is online.
* Bytes are stored in little-endian order: CPU0-7, 8-15...
* In each byte, lowest CPU number is least significant bit.
* The bit map is allocated by virNodeGetCPUMap and needs
* to be released using free() by the caller.
* @online: optional number of online CPUs in cpumap (OUT)
* Contains the number of online CPUs if the call was successful.
* @flags: extra flags; not used yet, so callers should always pass 0
*
* Get CPU map of host node CPUs.
*
* Returns number of CPUs present on the host node,
* or -1 if there was an error.
*/
int
virNodeGetCPUMap(virConnectPtr conn,
unsigned char **cpumap,
unsigned int *online,
unsigned int flags)
{
VIR_DEBUG("conn=%p, cpumap=%p, online=%p, flags=0x%x",
conn, cpumap, online, flags);
virResetLastError();
virCheckConnectReturn(conn, -1);
if (conn->driver->nodeGetCPUMap) {
int ret = conn->driver->nodeGetCPUMap(conn, cpumap, online, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virNodeGetFreePages:
* @conn: pointer to the hypervisor connection
* @npages: number of items in the @pages array
* @pages: page sizes to query
* @startCell: index of first cell to return free pages info on.
* @cellCount: maximum number of cells for which free pages
* information can be returned.
* @counts: returned counts of free pages
* @flags: extra flags; not used yet, so callers should always pass 0
*
* This calls queries the host system on free pages of
* specified size. For the input, @pages is expected to be
* filled with pages that caller is interested in (the size
* unit is kibibytes, so e.g. pass 2048 for 2MB), then @startcell
* refers to the first NUMA node that info should be collected
* from, and @cellcount tells how many consecutive nodes should
* be queried. On the function output, @counts is filled with
* desired information, where items are grouped by NUMA node.
* So from @counts[0] till @counts[@npages - 1] you'll find count
* for the first node (@startcell), then from @counts[@npages]
* till @count[2 * @npages - 1] you'll find info for the
* (@startcell + 1) node, and so on. It's callers responsibility
* to allocate the @counts array.
*
* Example how to use this API:
*
* unsigned int pages[] = { 4, 2048, 1048576}
* unsigned int npages = ARRAY_CARDINALITY(pages);
* int startcell = 0;
* unsigned int cellcount = 2;
*
* unsigned long long counts = malloc(sizeof(long long) * npages * cellcount);
*
* virNodeGetFreePages(conn, pages, npages,
* startcell, cellcount, counts, 0);
*
* for (i = 0 ; i < cellcount ; i++) {
* fprintf(stdout, "Cell %d\n", startcell + i);
* for (j = 0 ; j < npages ; j++) {
* fprintf(stdout, " Page size=%d count=%d bytes=%llu\n",
* pages[j], counts[(i * npages) + j],
* pages[j] * counts[(i * npages) + j]);
* }
* }
*
* This little code snippet will produce something like this:
* Cell 0
* Page size=4096 count=300 bytes=1228800
* Page size=2097152 count=0 bytes=0
* Page size=1073741824 count=1 bytes=1073741824
* Cell 1
* Page size=4096 count=0 bytes=0
* Page size=2097152 count=20 bytes=41943040
* Page size=1073741824 count=0 bytes=0
*
* Returns: the number of entries filled in @counts or -1 in case of error.
*/
int
virNodeGetFreePages(virConnectPtr conn,
unsigned int npages,
unsigned int *pages,
int startCell,
unsigned int cellCount,
unsigned long long *counts,
unsigned int flags)
{
VIR_DEBUG("conn=%p, npages=%u, pages=%p, startCell=%u, "
"cellCount=%u, counts=%p, flags=0x%x",
conn, npages, pages, startCell, cellCount, counts, flags);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckNonZeroArgGoto(npages, error);
virCheckNonNullArgGoto(pages, error);
virCheckNonZeroArgGoto(cellCount, error);
virCheckNonNullArgGoto(counts, error);
if (conn->driver->nodeGetFreePages) {
int ret;
ret = conn->driver->nodeGetFreePages(conn, npages, pages, startCell,
cellCount, counts, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}
/**
* virNodeAllocPages:
* @conn: pointer to the hypervisor connection
* @npages: number of items in the @pageSizes and
* @pageCounts arrays
* @pageSizes: which huge page sizes to allocate
* @pageCounts: how many pages should be allocated
* @startCell: index of first cell to allocate pages on
* @cellCount: number of consecutive cells to allocate pages on
* @flags: extra flags; binary-OR of virNodeAllocPagesFlags
*
* Sometimes, when trying to start a new domain, it may be
* necessary to reserve some huge pages in the system pool which
* can be then allocated by the domain. This API serves that
* purpose. On its input, @pageSizes and @pageCounts are arrays
* of the same cardinality of @npages. The @pageSizes contains
* page sizes which are to be allocated in the system (the size
* unit is kibibytes), and @pageCounts then contains the number
* of pages to reserve. If @flags is 0
* (VIR_NODE_ALLOC_PAGES_ADD), each pool corresponding to
* @pageSizes grows by the number of pages specified in the
* corresponding @pageCounts. If @flags contains
* VIR_NODE_ALLOC_PAGES_SET, each pool mentioned is resized to
* the given number of pages. The pages pool can be allocated
* over several NUMA nodes at once, just point at @startCell and
* tell how many subsequent NUMA nodes should be taken in. As a
* special case, if @startCell is equal to negative one, then
* kernel is instructed to allocate the pages over all NUMA nodes
* proportionally.
*
* Returns: the number of nodes successfully adjusted or -1 in
* case of an error.
*/
int
virNodeAllocPages(virConnectPtr conn,
unsigned int npages,
unsigned int *pageSizes,
unsigned long long *pageCounts,
int startCell,
unsigned int cellCount,
unsigned int flags)
{
VIR_DEBUG("conn=%p npages=%u pageSizes=%p pageCounts=%p "
"startCell=%d cellCount=%u flags=0x%x",
conn, npages, pageSizes, pageCounts, startCell,
cellCount, flags);
virResetLastError();
virCheckConnectReturn(conn, -1);
virCheckReadOnlyGoto(conn->flags, error);
virCheckNonZeroArgGoto(npages, error);
virCheckNonNullArgGoto(pageSizes, error);
virCheckNonNullArgGoto(pageCounts, error);
virCheckNonZeroArgGoto(cellCount, error);
if (conn->driver->nodeAllocPages) {
int ret;
ret = conn->driver->nodeAllocPages(conn, npages, pageSizes,
pageCounts, startCell,
cellCount, flags);
if (ret < 0)
goto error;
return ret;
}
virReportUnsupportedError();
error:
virDispatchError(conn);
return -1;
}