libvirt/docs/schemas/domaincommon.rng
Laine Stump 177db08775 qemu: add new disk device='lun' for bus='virtio' & type='block'
In the past, generic SCSI commands issued from a guest to a virtio
disk were always passed through to the underlying disk by qemu, and
the kernel would also pass them on.

As a result of CVE-2011-4127 (see:
http://seclists.org/oss-sec/2011/q4/536), qemu now honors its
scsi=on|off device option for virtio-blk-pci (which enables/disables
passthrough of generic SCSI commands), and the kernel will only allow
the commands for physical devices (not for partitions or logical
volumes). The default behavior of qemu is still to allow sending
generic SCSI commands to physical disks that are presented to a guest
as virtio-blk-pci devices, but libvirt prefers to disable those
commands in the standard virtio block devices, enabling it only when
specifically requested (hopefully indicating that the requester
understands what they're asking for). For this purpose, a new libvirt
disk device type (device='lun') has been created.

device='lun' is identical to the default device='disk', except that:

1) It is only allowed if bus='virtio', type='block', and the qemu
   version is "new enough" to support it ("new enough" == qemu 0.11 or
   better), otherwise the domain will fail to start and a
   CONFIG_UNSUPPORTED error will be logged).

2) The option "scsi=on" will be added to the -device arg to allow
   SG_IO commands (if device !='lun', "scsi=off" will be added to the
   -device arg so that SG_IO commands are specifically forbidden).

Guests which continue to use disk device='disk' (the default) will no
longer be able to use SG_IO commands on the disk; those that have
their disk device changed to device='lun' will still be able to use SG_IO
commands.

*docs/formatdomain.html.in - document the new device attribute value.
*docs/schemas/domaincommon.rng - allow it in the RNG
*tests/* - update the args of several existing tests to add scsi=off, and
 add one new test that will test scsi=on.
*src/conf/domain_conf.c - update domain XML parser and formatter

*src/qemu/qemu_(command|driver|hotplug).c - treat
 VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to
 VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above.

Note that no support for this new device value was added to any
hypervisor drivers other than qemu, because it's unclear what it might
mean (if anything) to those drivers.
2012-01-09 10:55:53 -05:00

2954 lines
76 KiB
XML

<?xml version="1.0"?>
<grammar xmlns="http://relaxng.org/ns/structure/1.0" datatypeLibrary="http://www.w3.org/2001/XMLSchema-datatypes">
<!-- domain-related definitions used in multiple grammars -->
<include href='basictypes.rng'/>
<include href='storageencryption.rng'/>
<include href='networkcommon.rng'/>
<!--
description element, may be placed anywhere under the root
-->
<define name="description">
<element name="description">
<text/>
</element>
</define>
<!--
We handle only document defining a domain
-->
<define name="domain">
<element name="domain">
<ref name="hvs"/>
<ref name="ids"/>
<interleave>
<optional>
<ref name="description"/>
</optional>
<optional>
<ref name="cpu"/>
</optional>
<optional>
<ref name="sysinfo"/>
</optional>
<ref name="os"/>
<ref name="clock"/>
<ref name="resources"/>
<ref name="features"/>
<ref name="termination"/>
<optional>
<ref name="devices"/>
</optional>
<optional>
<ref name="seclabel"/>
</optional>
<optional>
<ref name='qemucmdline'/>
</optional>
</interleave>
</element>
</define>
<define name="seclabel">
<element name="seclabel">
<optional>
<attribute name='model'>
<text/>
</attribute>
</optional>
<choice>
<group>
<!-- with dynamic label (default), relabel must be yes, baselabel
is optional, and label and imagelabel are output-only -->
<optional>
<attribute name='type'>
<value>dynamic</value>
</attribute>
</optional>
<optional>
<attribute name='relabel'>
<value>yes</value>
</attribute>
</optional>
<interleave>
<optional>
<element name='label'>
<text/>
</element>
</optional>
<optional>
<element name='imagelabel'>
<text/>
</element>
</optional>
<optional>
<element name='baselabel'>
<text/>
</element>
</optional>
</interleave>
</group>
<group>
<!-- with static label, relabel can be either format (default
no), label is required, imagelabel is output-only, and no
baselabel is present -->
<attribute name='type'>
<value>static</value>
</attribute>
<optional>
<attribute name='relabel'>
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</optional>
<interleave>
<element name='label'>
<text/>
</element>
<optional>
<element name='imagelabel'>
<text/>
</element>
</optional>
</interleave>
</group>
</choice>
</element>
</define>
<define name="devSeclabel">
<element name="seclabel">
<!-- A per-device seclabel override is more limited, either
relabel=no or a <label> must be present. -->
<choice>
<attribute name='relabel'>
<value>no</value>
</attribute>
<group>
<optional>
<attribute name='relabel'>
<value>yes</value>
</attribute>
</optional>
<element name='label'>
<text/>
</element>
</group>
</choice>
</element>
</define>
<define name="hvs">
<attribute name="type">
<choice>
<value>qemu</value>
<value>kqemu</value>
<value>kvm</value>
<value>xen</value>
<value>lxc</value>
<value>uml</value>
<value>openvz</value>
<value>test</value>
<value>vmware</value>
<value>hyperv</value>
<value>vbox</value>
<value>phyp</value>
</choice>
</attribute>
</define>
<define name="os">
<choice>
<ref name="osxen"/>
<ref name="oshvm"/>
<ref name="osexe"/>
</choice>
</define>
<define name="osxen">
<choice>
<group>
<optional>
<ref name="bootloader"/>
</optional>
<element name="os">
<ref name="ostypexen"/>
<ref name="osbootkernel"/>
</element>
</group>
<group>
<ref name="bootloader"/>
<optional>
<element name="os">
<ref name="ostypexen"/>
<optional>
<ref name="osbootkernel"/>
</optional>
</element>
</optional>
</group>
</choice>
</define>
<define name="oshvm">
<element name="os">
<ref name="ostypehvm"/>
<interleave>
<optional>
<element name="loader">
<ref name="absFilePath"/>
</element>
</optional>
<choice>
<ref name="osbootkernel"/>
<zeroOrMore>
<ref name="osbootdev"/>
</zeroOrMore>
</choice>
<optional>
<element name="bootmenu">
<attribute name="enable">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</element>
</optional>
<optional>
<ref name="smbios"/>
</optional>
<optional>
<ref name="bios"/>
</optional>
</interleave>
</element>
</define>
<define name="ostypexen">
<element name="type">
<optional>
<attribute name="arch">
<choice>
<value>i686</value>
<value>x86_64</value>
<value>ia64</value>
</choice>
</attribute>
</optional>
<optional>
<attribute name="machine">
<choice>
<value>xenpv</value>
<value>xenner</value>
</choice>
</attribute>
</optional>
<choice>
<value>xen</value>
<value>linux</value>
</choice>
</element>
</define>
<define name="ostypehvm">
<element name="type">
<optional>
<choice>
<ref name="hvmx86"/>
<ref name="hvmmips"/>
<ref name="hvmsparc"/>
<ref name="hvmppc"/>
<ref name="hvmppc64"/>
</choice>
</optional>
<value>hvm</value>
</element>
</define>
<define name="hvmx86">
<group>
<optional>
<attribute name="arch">
<choice>
<value>i686</value>
<value>x86_64</value>
</choice>
</attribute>
</optional>
<optional>
<attribute name="machine">
<data type="string">
<param name="pattern">[a-zA-Z0-9_\.\-]+</param>
</data>
</attribute>
</optional>
</group>
</define>
<define name="hvmmips">
<group>
<optional>
<attribute name="arch">
<value>mips</value>
</attribute>
</optional>
<optional>
<attribute name="machine">
<value>mips</value>
</attribute>
</optional>
</group>
</define>
<define name="hvmsparc">
<group>
<optional>
<attribute name="arch">
<value>sparc</value>
</attribute>
</optional>
<optional>
<attribute name="machine">
<value>sun4m</value>
</attribute>
</optional>
</group>
</define>
<define name="hvmppc">
<group>
<optional>
<attribute name="arch">
<value>ppc</value>
</attribute>
</optional>
<optional>
<attribute name="machine">
<choice>
<value>g3beige</value>
<value>mac99</value>
<value>prep</value>
</choice>
</attribute>
</optional>
</group>
</define>
<define name="hvmppc64">
<group>
<optional>
<attribute name="arch">
<value>ppc64</value>
</attribute>
</optional>
<optional>
<attribute name="machine">
<choice>
<value>pseries</value>
</choice>
</attribute>
</optional>
</group>
</define>
<define name="osexe">
<element name="os">
<element name="type">
<value>exe</value>
</element>
<interleave>
<optional>
<element name="init">
<ref name="absFilePath"/>
</element>
</optional>
</interleave>
</element>
</define>
<!--
The Identifiers can be:
- an optional id attribute with a number on the domain element
- a mandatory name
- an optional uuid
-->
<define name="ids">
<optional>
<attribute name="id">
<ref name="unsignedInt"/>
</attribute>
</optional>
<interleave>
<element name="name">
<ref name="domainName"/>
</element>
<optional>
<element name="uuid">
<ref name="UUID"/>
</element>
</optional>
</interleave>
</define>
<!--
Resources usage defines the amount of memory (maximum and possibly
current usage) and number of virtual CPUs used by that domain.
We can't check here the rule that currentMemory <= memory
-->
<define name="resources">
<interleave>
<element name="memory">
<ref name="memoryKB"/>
</element>
<optional>
<element name="currentMemory">
<ref name="memoryKB"/>
</element>
</optional>
<optional>
<element name="memoryBacking">
<optional>
<element name="hugepages">
<empty/>
</element>
</optional>
</element>
</optional>
<!-- The Blkio cgroup related tunables would go in the blkiotune -->
<optional>
<element name="blkiotune">
<interleave>
<!-- I/O weight the VM can use -->
<optional>
<element name="weight">
<ref name="weight"/>
</element>
</optional>
<zeroOrMore>
<element name="device">
<interleave>
<element name="path">
<ref name="absFilePath"/>
</element>
<element name="weight">
<ref name="weight"/>
</element>
</interleave>
</element>
</zeroOrMore>
</interleave>
</element>
</optional>
<!-- All the memory/swap related tunables would go in the memtune -->
<optional>
<element name="memtune">
<!-- Maximum memory the VM can use -->
<optional>
<element name="hard_limit">
<ref name="memoryKB"/>
</element>
</optional>
<!-- Minimum memory ascertained for the VM during contention -->
<optional>
<element name="soft_limit">
<ref name="memoryKB"/>
</element>
</optional>
<!-- Minimum amount of memory required to start the VM -->
<optional>
<element name="min_guarantee">
<ref name="memoryKB"/>
</element>
</optional>
<!-- Maximum swap area the VM can use -->
<optional>
<element name="swap_hard_limit">
<ref name="memoryKB"/>
</element>
</optional>
</element>
</optional>
<optional>
<element name="vcpu">
<optional>
<attribute name="cpuset">
<ref name="cpuset"/>
</attribute>
</optional>
<optional>
<attribute name="current">
<ref name="countCPU"/>
</attribute>
</optional>
<ref name="countCPU"/>
</element>
</optional>
<!-- All the cpu related tunables would go in the cputune -->
<optional>
<element name="cputune">
<optional>
<element name="shares">
<ref name="cpushares"/>
</element>
</optional>
<optional>
<element name="period">
<ref name="cpuperiod"/>
</element>
</optional>
<optional>
<element name="quota">
<ref name="cpuquota"/>
</element>
</optional>
<zeroOrMore>
<element name="vcpupin">
<attribute name="vcpu">
<ref name="vcpuid"/>
</attribute>
<attribute name="cpuset">
<ref name="cpuset"/>
</attribute>
</element>
</zeroOrMore>
</element>
</optional>
<!-- All the NUMA related tunables would go in the numatune -->
<optional>
<element name="numatune">
<optional>
<element name="memory">
<attribute name="mode">
<choice>
<value>strict</value>
<value>preferred</value>
<value>interleave</value>
</choice>
</attribute>
<attribute name="nodeset">
<ref name="cpuset"/>
</attribute>
</element>
</optional>
</element>
</optional>
</interleave>
</define>
<define name="clock">
<optional>
<element name="clock">
<choice>
<attribute name="offset">
<value>localtime</value>
</attribute>
<attribute name="offset">
<value>utc</value>
</attribute>
<group>
<attribute name="offset">
<value>timezone</value>
</attribute>
<optional>
<attribute name="timezone">
<ref name="timeZone"/>
</attribute>
</optional>
</group>
<group>
<attribute name="offset">
<value>variable</value>
</attribute>
<optional>
<attribute name="adjustment">
<ref name="timeDelta"/>
</attribute>
</optional>
</group>
</choice>
<zeroOrMore>
<ref name="timer"/>
</zeroOrMore>
</element>
</optional>
</define>
<define name="timer">
<element name="timer">
<attribute name="name">
<choice>
<value>platform</value>
<value>pit</value>
<value>rtc</value>
<value>hpet</value>
<value>tsc</value>
</choice>
</attribute>
<optional>
<attribute name="track">
<choice>
<value>boot</value>
<value>guest</value>
<value>wall</value>
</choice>
</attribute>
</optional>
<optional>
<attribute name="tickpolicy">
<choice>
<value>delay</value>
<value>catchup</value>
<value>merge</value>
<value>discard</value>
</choice>
</attribute>
</optional>
<optional>
<ref name="catchup"/>
</optional>
<optional>
<attribute name="frequency">
<ref name="unsignedInt"/>
</attribute>
</optional>
<optional>
<attribute name="mode">
<choice>
<value>auto</value>
<value>native</value>
<value>emulate</value>
<value>paravirt</value>
<value>smpsafe</value>
</choice>
</attribute>
</optional>
<optional>
<attribute name="present">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</optional>
<empty/>
</element>
</define>
<define name="catchup">
<element name="catchup">
<optional>
<attribute name="threshold">
<ref name="unsignedInt"/>
</attribute>
<attribute name="slew">
<ref name="unsignedInt"/>
</attribute>
<attribute name="limit">
<ref name="unsignedInt"/>
</attribute>
</optional>
</element>
</define>
<!--
A bootloader may be used to extract the OS information instead of
defining the OS parameter in the instance. It points just to the
binary or script used to extract the data from the first disk device.
-->
<define name="bootloader">
<interleave>
<element name="bootloader">
<choice>
<ref name="absFilePath"/>
<empty/>
</choice>
</element>
<optional>
<element name="bootloader_args">
<text/>
</element>
</optional>
</interleave>
</define>
<define name="osbootkernel">
<interleave>
<optional>
<element name="kernel">
<ref name="absFilePath"/>
</element>
</optional>
<optional>
<element name="initrd">
<ref name="absFilePath"/>
</element>
</optional>
<optional>
<element name="root">
<ref name="absFilePath"/>
</element>
</optional>
<optional>
<element name="cmdline">
<text/>
</element>
</optional>
</interleave>
</define>
<define name="osbootdev">
<element name="boot">
<attribute name="dev">
<choice>
<value>hd</value>
<value>fd</value>
<value>cdrom</value>
<value>network</value>
</choice>
</attribute>
<empty/>
</element>
</define>
<define name="diskspec">
<interleave>
<optional>
<ref name="driver"/>
</optional>
<optional>
<ref name="diskAuth"/>
</optional>
<ref name="target"/>
<optional>
<ref name="deviceBoot"/>
</optional>
<optional>
<element name="readonly">
<empty/>
</element>
</optional>
<optional>
<element name="shareable">
<empty/>
</element>
</optional>
<optional>
<element name="transient">
<empty/>
</element>
</optional>
<optional>
<element name="serial">
<ref name="diskSerial"/>
</element>
</optional>
<optional>
<ref name="encryption"/>
</optional>
<optional>
<ref name="diskIoTune"/>
</optional>
<optional>
<ref name="address"/>
</optional>
</interleave>
</define>
<define name="snapshot">
<attribute name="snapshot">
<choice>
<value>no</value>
<value>internal</value>
<value>external</value>
</choice>
</attribute>
</define>
<define name="lease">
<element name="lease">
<interleave>
<element name="lockspace">
<text/>
</element>
<element name="key">
<text/>
</element>
<element name="target">
<attribute name="path">
<text/>
</attribute>
<optional>
<attribute name="offset">
<ref name="unsignedInt"/>
</attribute>
</optional>
</element>
</interleave>
</element>
</define>
<define name="startupPolicy">
<attribute name="startupPolicy">
<choice>
<value>mandatory</value>
<value>requisite</value>
<value>optional</value>
</choice>
</attribute>
</define>
<!--
A disk description can be either of type file or block
The name of the attribute on the source element depends on the type
-->
<define name="disk">
<element name="disk">
<optional>
<attribute name="device">
<choice>
<value>floppy</value>
<value>disk</value>
<value>cdrom</value>
<value>lun</value>
</choice>
</attribute>
</optional>
<optional>
<ref name="snapshot"/>
</optional>
<choice>
<group>
<attribute name="type">
<value>file</value>
</attribute>
<interleave>
<optional>
<element name="source">
<optional>
<attribute name="file">
<ref name="absFilePath"/>
</attribute>
</optional>
<optional>
<ref name="startupPolicy"/>
</optional>
<optional>
<ref name='devSeclabel'/>
</optional>
</element>
</optional>
<ref name="diskspec"/>
</interleave>
</group>
<group>
<attribute name="type">
<value>block</value>
</attribute>
<interleave>
<optional>
<element name="source">
<attribute name="dev">
<ref name="absFilePath"/>
</attribute>
<optional>
<ref name='devSeclabel'/>
</optional>
</element>
</optional>
<ref name="diskspec"/>
</interleave>
</group>
<group>
<attribute name="type">
<value>dir</value>
</attribute>
<interleave>
<optional>
<element name="source">
<attribute name="dir">
<ref name="absFilePath"/>
</attribute>
<empty/>
</element>
</optional>
<ref name="diskspec"/>
</interleave>
</group>
<group>
<attribute name="type">
<value>network</value>
</attribute>
<interleave>
<optional>
<element name="source">
<attribute name="protocol">
<choice>
<value>nbd</value>
<value>rbd</value>
<value>sheepdog</value>
</choice>
</attribute>
<optional>
<attribute name="name"/>
</optional>
<zeroOrMore>
<element name="host">
<attribute name="name">
<ref name="dnsName"/>
</attribute>
<attribute name="port">
<ref name="unsignedInt"/>
</attribute>
</element>
</zeroOrMore>
<empty/>
</element>
</optional>
<ref name="diskspec"/>
</interleave>
</group>
<ref name="diskspec"/>
</choice>
</element>
</define>
<define name="diskTarget">
<data type="string">
<param name="pattern">(ioemu:)?(fd|hd|sd|vd|xvd|ubd)[a-zA-Z0-9_]+</param>
</data>
</define>
<define name="target">
<element name="target">
<attribute name="dev">
<ref name="diskTarget"/>
</attribute>
<optional>
<attribute name="bus">
<choice>
<value>ide</value>
<value>fdc</value>
<value>scsi</value>
<value>virtio</value>
<value>xen</value>
<value>usb</value>
<value>uml</value>
<value>sata</value>
</choice>
</attribute>
</optional>
</element>
</define>
<!--
Disk may use a special driver for access. Currently this is
only defined for Xen for tap/aio and file, but will certainly be
extended in the future, and libvirt doesn't look for specific values.
-->
<define name="driver">
<element name="driver">
<choice>
<group>
<ref name="driverFormat"/>
<optional>
<ref name="driverCache"/>
</optional>
</group>
<group>
<optional>
<ref name="driverFormat"/>
</optional>
<ref name="driverCache"/>
</group>
</choice>
<optional>
<ref name="driverErrorPolicy"/>
</optional>
<optional>
<ref name="driverRerrorPolicy"/>
</optional>
<optional>
<ref name="driverIO"/>
</optional>
<optional>
<ref name="ioeventfd"/>
</optional>
<optional>
<ref name="event_idx"/>
</optional>
<empty/>
</element>
</define>
<define name="driverFormat">
<attribute name="name">
<ref name="genericName"/>
</attribute>
<optional>
<attribute name="type">
<ref name="genericName"/>
</attribute>
</optional>
</define>
<define name="driverCache">
<attribute name="cache">
<choice>
<value>none</value>
<value>writeback</value>
<value>writethrough</value>
<value>directsync</value>
<value>unsafe</value>
</choice>
</attribute>
</define>
<define name="driverErrorPolicy">
<attribute name="error_policy">
<choice>
<value>stop</value>
<value>report</value>
<value>ignore</value>
<value>enospace</value>
</choice>
</attribute>
</define>
<define name="driverRerrorPolicy">
<attribute name="rerror_policy">
<choice>
<value>stop</value>
<value>report</value>
<value>ignore</value>
</choice>
</attribute>
</define>
<define name="driverIO">
<attribute name="io">
<choice>
<value>threads</value>
<value>native</value>
</choice>
</attribute>
</define>
<define name="ioeventfd">
<attribute name="ioeventfd">
<choice>
<value>on</value>
<value>off</value>
</choice>
</attribute>
</define>
<define name="event_idx">
<attribute name="event_idx">
<choice>
<value>on</value>
<value>off</value>
</choice>
</attribute>
</define>
<define name="controller">
<element name="controller">
<choice>
<group>
<optional>
<attribute name="type">
<choice>
<value>fdc</value>
<value>ide</value>
<value>scsi</value>
<value>sata</value>
<value>ccid</value>
<value>usb</value>
</choice>
</attribute>
</optional>
</group>
<!-- virtio-serial can have 2 additional attributes -->
<group>
<attribute name="type">
<value>virtio-serial</value>
</attribute>
<optional>
<attribute name="ports">
<ref name="unsignedInt"/>
</attribute>
</optional>
<optional>
<attribute name="vectors">
<ref name="unsignedInt"/>
</attribute>
</optional>
</group>
</choice>
<attribute name="index">
<ref name="unsignedInt"/>
</attribute>
<optional>
<attribute name="model">
<choice>
<value>auto</value>
<value>buslogic</value>
<value>lsilogic</value>
<value>lsisas1068</value>
<value>vmpvscsi</value>
<value>piix3-uhci</value>
<value>piix4-uhci</value>
<value>ehci</value>
<value>ich9-ehci1</value>
<value>ich9-uhci1</value>
<value>ich9-uhci2</value>
<value>ich9-uhci3</value>
<value>vt82c686b-uhci</value>
<value>pci-ohci</value>
</choice>
</attribute>
</optional>
<optional>
<ref name="usbmaster"/>
</optional>
<optional>
<ref name="address"/>
</optional>
</element>
</define>
<define name="filesystem">
<element name="filesystem">
<choice>
<group>
<attribute name="type">
<value>file</value>
</attribute>
<interleave>
<element name="source">
<attribute name="file">
<ref name="absFilePath"/>
</attribute>
<empty/>
</element>
<ref name="filesystemtgt"/>
</interleave>
</group>
<group>
<attribute name="type">
<value>block</value>
</attribute>
<interleave>
<element name="source">
<attribute name="dev">
<ref name="absFilePath"/>
</attribute>
<empty/>
</element>
<ref name="filesystemtgt"/>
</interleave>
</group>
<group>
<!-- type='mount' is default -->
<optional>
<attribute name="type">
<value>mount</value>
</attribute>
</optional>
<interleave>
<element name="source">
<attribute name="dir">
<ref name="absFilePath"/>
</attribute>
<empty/>
</element>
<optional>
<element name="driver">
<attribute name="type">
<choice>
<value>path</value>
<value>handle</value>
</choice>
</attribute>
<empty/>
</element>
</optional>
<ref name="filesystemtgt"/>
</interleave>
</group>
<group>
<attribute name="type">
<value>template</value>
</attribute>
<interleave>
<element name="source">
<attribute name="name">
<ref name="genericName"/>
</attribute>
<empty/>
</element>
<ref name="filesystemtgt"/>
</interleave>
</group>
</choice>
<optional>
<attribute name="accessmode">
<choice>
<value>passthrough</value>
<value>mapped</value>
<value>squash</value>
</choice>
</attribute>
</optional>
</element>
</define>
<define name="filesystemtgt">
<interleave>
<optional>
<ref name="address"/>
</optional>
<element name="target">
<attribute name="dir">
<ref name="absDirPath"/>
</attribute>
<empty/>
</element>
</interleave>
</define>
<!--
An interface description can either be of type bridge in which case
it will use a bridging source, or of type ethernet which uses a device
source and a device target instead. They both share a set of interface
options. FIXME
-->
<define name="interface">
<element name="interface">
<choice>
<group>
<attribute name="type">
<value>bridge</value>
</attribute>
<interleave>
<optional>
<element name="source">
<attribute name="bridge">
<ref name="deviceName"/>
</attribute>
<empty/>
</element>
</optional>
<ref name="interface-options"/>
</interleave>
</group>
<group>
<attribute name="type">
<value>ethernet</value>
</attribute>
<interleave>
<optional>
<element name="source">
<attribute name="dev">
<ref name="deviceName"/>
</attribute>
<empty/>
</element>
</optional>
<ref name="interface-options"/>
</interleave>
</group>
<group>
<attribute name="type">
<value>network</value>
</attribute>
<interleave>
<element name="source">
<attribute name="network">
<ref name="deviceName"/>
</attribute>
<optional>
<attribute name="portgroup">
<ref name="deviceName"/>
</attribute>
</optional>
<empty/>
</element>
<optional>
<ref name="virtualPortProfile"/>
</optional>
<ref name="interface-options"/>
</interleave>
</group>
<group>
<attribute name="type">
<value>direct</value>
</attribute>
<interleave>
<element name="source">
<attribute name="dev">
<ref name="deviceName"/>
</attribute>
<optional>
<attribute name="mode">
<ref name="bridgeMode"/>
</attribute>
</optional>
<empty/>
</element>
<optional>
<ref name="virtualPortProfile"/>
</optional>
<ref name="interface-options"/>
</interleave>
</group>
<group>
<attribute name="type">
<value>user</value>
</attribute>
<interleave>
<ref name="interface-options"/>
</interleave>
</group>
<group>
<attribute name="type">
<value>internal</value>
</attribute>
<interleave>
<element name="source">
<attribute name="name">
<ref name="deviceName"/>
</attribute>
<empty/>
</element>
<ref name="interface-options"/>
</interleave>
</group>
</choice>
</element>
</define>
<!--
The interface options possible are:
- the MAC address
- the IP address bound to the interface
- the name of the script used to set up the binding
- the target device used
- boot order
-->
<define name="interface-options">
<interleave>
<optional>
<element name="target">
<attribute name="dev">
<ref name="deviceName"/>
</attribute>
<empty/>
</element>
</optional>
<optional>
<element name="mac">
<attribute name="address">
<ref name="macAddr"/>
</attribute>
<empty/>
</element>
</optional>
<optional>
<element name="ip">
<attribute name="address">
<ref name="ipv4Addr"/>
</attribute>
<empty/>
</element>
</optional>
<optional>
<element name="script">
<attribute name="path">
<ref name="filePath"/>
</attribute>
<empty/>
</element>
</optional>
<optional>
<element name="model">
<attribute name="type">
<data type="string">
<param name='pattern'>[a-zA-Z0-9\-_]+</param>
</data>
</attribute>
<empty/>
</element>
</optional>
<optional>
<element name="driver">
<optional>
<attribute name="name">
<choice>
<value>qemu</value>
<value>vhost</value>
</choice>
</attribute>
</optional>
<optional>
<attribute name="txmode">
<choice>
<value>iothread</value>
<value>timer</value>
</choice>
</attribute>
</optional>
<optional>
<ref name="ioeventfd"/>
</optional>
<optional>
<ref name="event_idx"/>
</optional>
<empty/>
</element>
</optional>
<optional>
<ref name="address"/>
</optional>
<optional>
<element name="filterref">
<ref name="filterref-node-attributes"/>
</element>
</optional>
<optional>
<element name="tune">
<optional>
<!-- size of send buffer for network tap devices -->
<element name="sndbuf">
<ref name="unsignedInt"/>
</element>
</optional>
</element>
</optional>
<optional>
<ref name="deviceBoot"/>
</optional>
<optional>
<ref name="bandwidth"/>
</optional>
</interleave>
</define>
<!--
An emulator description is just a path to the binary used for the task
-->
<define name="emulator">
<element name="emulator">
<ref name="absFilePath"/>
</element>
</define>
<!--
A graphic description, currently in Xen only 2 types are supported:
- sdl with optional display, xauth and fullscreen
- vnc with a required port and optional listen IP address, password
and keymap
-->
<define name="graphic">
<element name="graphics">
<choice>
<group>
<attribute name="type">
<value>sdl</value>
</attribute>
<optional>
<attribute name="display">
<text/>
</attribute>
</optional>
<optional>
<attribute name="xauth">
<text/>
</attribute>
</optional>
<optional>
<attribute name="fullscreen">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</optional>
</group>
<group>
<attribute name="type">
<value>vnc</value>
</attribute>
<choice>
<group>
<optional>
<attribute name="port">
<ref name="PortNumber"/>
</attribute>
</optional>
<optional>
<attribute name="autoport">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</optional>
<optional>
<attribute name="listen">
<ref name="addrIPorName"/>
</attribute>
</optional>
</group>
<group>
<optional>
<attribute name="socket">
<ref name="absFilePath"/>
</attribute>
</optional>
</group>
</choice>
<optional>
<attribute name="passwd">
<text/>
</attribute>
</optional>
<optional>
<attribute name="keymap">
<text/>
</attribute>
</optional>
<optional>
<attribute name="passwdValidTo">
<data type="dateTime"/>
</attribute>
</optional>
<optional>
<attribute name="connected">
<choice>
<value>keep</value>
</choice>
</attribute>
</optional>
<ref name="listenElements"/>
</group>
<group>
<attribute name="type">
<value>spice</value>
</attribute>
<optional>
<attribute name="port">
<ref name="PortNumber"/>
</attribute>
</optional>
<optional>
<attribute name="tlsPort">
<ref name="PortNumber"/>
</attribute>
</optional>
<optional>
<attribute name="autoport">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</optional>
<optional>
<attribute name="listen">
<ref name="addrIPorName"/>
</attribute>
</optional>
<optional>
<attribute name="passwd">
<text/>
</attribute>
</optional>
<optional>
<attribute name="keymap">
<text/>
</attribute>
</optional>
<optional>
<attribute name="passwdValidTo">
<data type="dateTime"/>
</attribute>
</optional>
<optional>
<attribute name="connected">
<choice>
<value>fail</value>
<value>disconnect</value>
<value>keep</value>
</choice>
</attribute>
</optional>
<interleave>
<ref name="listenElements"/>
<zeroOrMore>
<element name="channel">
<attribute name="name">
<choice>
<value>main</value>
<value>display</value>
<value>inputs</value>
<value>cursor</value>
<value>playback</value>
<value>record</value>
<value>smartcard</value>
</choice>
</attribute>
<attribute name="mode">
<choice>
<value>any</value>
<value>secure</value>
<value>insecure</value>
</choice>
</attribute>
<empty/>
</element>
</zeroOrMore>
<optional>
<element name="image">
<attribute name="compression">
<choice>
<value>auto_glz</value>
<value>auto_lz</value>
<value>quic</value>
<value>glz</value>
<value>lz</value>
<value>off</value>
</choice>
</attribute>
<empty/>
</element>
</optional>
<optional>
<element name="jpeg">
<attribute name="compression">
<choice>
<value>auto</value>
<value>never</value>
<value>always</value>
</choice>
</attribute>
<empty/>
</element>
</optional>
<optional>
<element name="zlib">
<attribute name="compression">
<choice>
<value>auto</value>
<value>never</value>
<value>always</value>
</choice>
</attribute>
<empty/>
</element>
</optional>
<optional>
<element name="playback">
<attribute name="compression">
<choice>
<value>on</value>
<value>off</value>
</choice>
</attribute>
<empty/>
</element>
</optional>
<optional>
<element name="streaming">
<attribute name="mode">
<choice>
<value>filter</value>
<value>all</value>
<value>off</value>
</choice>
</attribute>
<empty/>
</element>
</optional>
<optional>
<element name="clipboard">
<attribute name="copypaste">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
<empty/>
</element>
</optional>
</interleave>
</group>
<group>
<attribute name="type">
<value>rdp</value>
</attribute>
<optional>
<attribute name="port">
<ref name="PortNumber"/>
</attribute>
</optional>
<optional>
<attribute name="autoport">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</optional>
<optional>
<attribute name="replaceUser">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</optional>
<optional>
<attribute name="multiUser">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</optional>
<optional>
<attribute name="listen">
<ref name="addrIPorName"/>
</attribute>
</optional>
<ref name="listenElements"/>
</group>
<group>
<attribute name="type">
<value>desktop</value>
</attribute>
<optional>
<attribute name="display">
<text/>
</attribute>
</optional>
<optional>
<attribute name="fullscreen">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</optional>
</group>
</choice>
</element>
</define>
<define name="listenElements">
<zeroOrMore>
<element name="listen">
<choice>
<group>
<attribute name="type">
<value>address</value>
</attribute>
<attribute name="address">
<ref name="addrIPorName"/>
</attribute>
</group>
<group>
<attribute name="type">
<value>network</value>
</attribute>
<attribute name="network">
<text/>
</attribute>
<optional>
<attribute name="address">
<ref name="addrIPorName"/>
</attribute>
</optional>
</group>
</choice>
</element>
</zeroOrMore>
</define>
<!--
A video adapter description, allowing configuration of device
model, number of virtual heads, and video ram size
-->
<define name="video">
<element name="video">
<optional>
<element name="model">
<attribute name="type">
<choice>
<value>vga</value>
<value>cirrus</value>
<value>vmvga</value>
<value>xen</value>
<value>vbox</value>
<value>qxl</value>
</choice>
</attribute>
<optional>
<attribute name="vram">
<ref name="unsignedInt"/>
</attribute>
</optional>
<optional>
<attribute name="heads">
<ref name="unsignedInt"/>
</attribute>
</optional>
<optional>
<element name="acceleration">
<optional>
<attribute name="accel3d">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</optional>
<optional>
<attribute name="accel2d">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</optional>
</element>
</optional>
</element>
</optional>
<optional>
<ref name="address"/>
</optional>
</element>
</define>
<!--
When a domain terminates multiple policies can be applied depending
on how it ended:
-->
<define name="termination">
<interleave>
<optional>
<element name="on_reboot">
<ref name="offOptions"/>
</element>
</optional>
<optional>
<element name="on_poweroff">
<ref name="offOptions"/>
</element>
</optional>
<optional>
<element name="on_crash">
<ref name="crashOptions"/>
</element>
</optional>
</interleave>
</define>
<!--
Options when a domain terminates:
destroy: The domain is cleaned up
restart: A new domain is started in place of the old one
preserve: The domain will remain in memory until it is destroyed manually
rename-restart: a variant of the previous one but where the old domain is
renamed before being saved to allow a restart
-->
<define name="offOptions">
<choice>
<value>destroy</value>
<value>restart</value>
<value>preserve</value>
<value>rename-restart</value>
</choice>
</define>
<!--
Options when a domain crashes:
destroy: The domain is cleaned up
restart: A new domain is started in place of the old one
preserve: The domain will remain in memory until it is destroyed manually
rename-restart: a variant of the previous one but where the old domain is
renamed before being saved to allow a restart
coredump-destroy: The crashed domain's core will be dumped, and then the
domain will be terminated completely and all resources
released
coredump-restart: The crashed domain's core will be dumped, and then the
domain will be restarted with the same configuration
-->
<define name="crashOptions">
<choice>
<value>destroy</value>
<value>restart</value>
<value>preserve</value>
<value>rename-restart</value>
<value>coredump-destroy</value>
<value>coredump-restart</value>
</choice>
</define>
<!--
Specific setup for a qemu emulated character device. Note: this
definition doesn't fully specify the constraints on this node.
-->
<define name="qemucdev">
<ref name="qemucdevSrcType"/>
<optional>
<attribute name="tty">
<ref name="absFilePath"/>
</attribute>
</optional>
<interleave>
<ref name="qemucdevSrcDef"/>
<optional>
<ref name="qemucdevTgtDef"/>
</optional>
<optional>
<ref name="address"/>
</optional>
</interleave>
</define>
<define name="qemucdevConsoleTgtType">
<attribute name="type">
<choice>
<value>xen</value>
<value>serial</value>
<value>uml</value>
<value>virtio</value>
</choice>
</attribute>
</define>
<define name="qemucdevTgtDef">
<element name="target">
<interleave>
<optional>
<ref name="qemucdevConsoleTgtType"/>
</optional>
<optional>
<attribute name="port"/>
</optional>
</interleave>
</element>
</define>
<define name="qemucdevSrcTypeChoice">
<choice>
<value>dev</value>
<value>file</value>
<value>pipe</value>
<value>unix</value>
<value>tcp</value>
<value>udp</value>
<value>null</value>
<value>stdio</value>
<value>vc</value>
<value>pty</value>
<value>spicevmc</value>
</choice>
</define>
<define name="qemucdevSrcType">
<attribute name="type">
<ref name="qemucdevSrcTypeChoice"/>
</attribute>
</define>
<define name="qemucdevSrcDef">
<zeroOrMore>
<element name="source">
<optional>
<attribute name="mode"/>
</optional>
<optional>
<attribute name="path"/>
</optional>
<optional>
<attribute name="host"/>
</optional>
<optional>
<attribute name="service"/>
</optional>
<optional>
<attribute name="wiremode"/>
</optional>
</element>
</zeroOrMore>
<optional>
<element name="protocol">
<optional>
<attribute name="type">
<choice>
<value>raw</value>
<value>telnet</value>
<value>telnets</value>
<value>tls</value>
</choice>
</attribute>
</optional>
</element>
</optional>
</define>
<!--
The description for a console
just a tty device
-->
<define name="console">
<element name="console">
<choice>
<group>
<optional>
<attribute name="tty">
<ref name="absFilePath"/>
</attribute>
</optional>
<empty/>
</group>
<choice>
<ref name="qemucdev"/>
</choice>
</choice>
</element>
</define>
<define name="sound">
<element name="sound">
<attribute name="model">
<choice>
<value>sb16</value>
<value>es1370</value>
<value>pcspk</value>
<value>ac97</value>
<value>ich6</value>
</choice>
</attribute>
<optional>
<ref name="address"/>
</optional>
</element>
</define>
<define name="watchdog">
<element name="watchdog">
<attribute name="model">
<choice>
<value>i6300esb</value>
<value>ib700</value>
</choice>
</attribute>
<optional>
<attribute name="action">
<choice>
<value>reset</value>
<value>shutdown</value>
<value>poweroff</value>
<value>pause</value>
<value>none</value>
<value>dump</value>
</choice>
</attribute>
</optional>
<optional>
<ref name="address"/>
</optional>
</element>
</define>
<define name="memballoon">
<element name="memballoon">
<attribute name="model">
<choice>
<value>virtio</value>
<value>xen</value>
<value>none</value>
</choice>
</attribute>
<optional>
<ref name="address"/>
</optional>
</element>
</define>
<define name="parallel">
<element name="parallel">
<ref name="qemucdev"/>
</element>
</define>
<define name="serial">
<element name="serial">
<ref name="qemucdev"/>
</element>
</define>
<define name="guestfwdTarget">
<element name="target">
<attribute name="type">
<value>guestfwd</value>
</attribute>
<attribute name="address"/>
<attribute name="port"/>
</element>
</define>
<define name="virtioTarget">
<element name="target">
<attribute name="type">
<value>virtio</value>
</attribute>
<optional>
<attribute name="name"/>
</optional>
</element>
</define>
<define name="channel">
<element name="channel">
<ref name="qemucdevSrcType"/>
<interleave>
<ref name="qemucdevSrcDef"/>
<choice>
<ref name="guestfwdTarget"/>
<ref name="virtioTarget"/>
</choice>
<optional>
<ref name="address"/>
</optional>
</interleave>
</element>
</define>
<define name="smartcard">
<element name="smartcard">
<choice>
<group>
<attribute name="mode">
<value>host</value>
</attribute>
<!-- might need to add optional database element here later -->
</group>
<group>
<attribute name="mode">
<value>host-certificates</value>
</attribute>
<ref name='certificate'/>
<ref name='certificate'/>
<ref name='certificate'/>
<optional>
<element name="database">
<ref name="absDirPath"/>
</element>
</optional>
</group>
<group>
<attribute name="mode">
<value>passthrough</value>
</attribute>
<ref name="qemucdevSrcType"/>
<interleave>
<ref name="qemucdevSrcDef"/>
<optional>
<ref name="qemucdevTgtDef"/>
</optional>
</interleave>
</group>
</choice>
<optional>
<ref name="address"/>
</optional>
</element>
</define>
<define name="certificate">
<element name="certificate">
<text/>
</element>
</define>
<define name="input">
<element name="input">
<attribute name="type">
<choice>
<value>tablet</value>
<value>mouse</value>
</choice>
</attribute>
<optional>
<attribute name="bus">
<choice>
<value>ps2</value>
<value>usb</value>
<value>xen</value>
</choice>
</attribute>
</optional>
<optional>
<ref name="address"/>
</optional>
</element>
</define>
<define name="hub">
<element name="hub">
<attribute name="type">
<choice>
<value>usb</value>
</choice>
</attribute>
<optional>
<ref name="address"/>
</optional>
</element>
</define>
<define name="redirdev">
<element name="redirdev">
<attribute name="bus">
<choice>
<value>usb</value>
</choice>
</attribute>
<attribute name="type">
<ref name="qemucdevSrcTypeChoice"/>
</attribute>
<ref name="qemucdevSrcDef"/>
<optional>
<ref name="address"/>
</optional>
</element>
</define>
<define name="hostdev">
<element name="hostdev">
<optional>
<attribute name="mode">
<choice>
<value>subsystem</value>
<value>capabilities</value>
</choice>
</attribute>
</optional>
<attribute name="type">
<choice>
<value>usb</value>
<value>pci</value>
</choice>
</attribute>
<optional>
<attribute name="managed">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</optional>
<group>
<element name="source">
<choice>
<group>
<ref name="usbproduct"/>
<optional>
<ref name="usbaddress"/>
</optional>
</group>
<ref name="usbaddress"/>
<element name="address">
<ref name="pciaddress"/>
</element>
</choice>
</element>
</group>
<optional>
<ref name="deviceBoot"/>
</optional>
<optional>
<ref name="address"/>
</optional>
<optional>
<element name="rom">
<attribute name="bar">
<choice>
<value>on</value>
<value>off</value>
</choice>
</attribute>
<empty/>
</element>
</optional>
</element>
</define>
<define name="usbproduct">
<element name="vendor">
<attribute name="id">
<ref name="usbId"/>
</attribute>
</element>
<element name="product">
<attribute name="id">
<ref name="usbId"/>
</attribute>
</element>
</define>
<define name="usbaddress">
<element name="address">
<attribute name="bus">
<ref name="usbAddr"/>
</attribute>
<attribute name="device">
<ref name="usbPort"/>
</attribute>
</element>
</define>
<define name="usbportaddress">
<attribute name="bus">
<ref name="usbAddr"/>
</attribute>
<attribute name="port">
<ref name="usbPort"/>
</attribute>
</define>
<define name="spaprvioaddress">
<optional>
<attribute name="reg">
<ref name="spaprvioReg"/>
</attribute>
</optional>
</define>
<define name="pciaddress">
<optional>
<attribute name="domain">
<ref name="pciDomain"/>
</attribute>
</optional>
<attribute name="bus">
<ref name="pciBus"/>
</attribute>
<attribute name="slot">
<ref name="pciSlot"/>
</attribute>
<attribute name="function">
<ref name="pciFunc"/>
</attribute>
<optional>
<attribute name="multifunction">
<choice>
<value>on</value>
<value>off</value>
</choice>
</attribute>
</optional>
</define>
<define name="driveaddress">
<optional>
<attribute name="controller">
<ref name="driveController"/>
</attribute>
</optional>
<optional>
<attribute name="bus">
<ref name="driveBus"/>
</attribute>
</optional>
<attribute name="unit">
<ref name="driveUnit"/>
</attribute>
</define>
<define name="virtioserialaddress">
<attribute name="controller">
<ref name="driveController"/>
</attribute>
<optional>
<attribute name="bus">
<ref name="driveBus"/>
</attribute>
</optional>
<optional>
<attribute name="port">
<ref name="driveUnit"/>
</attribute>
</optional>
</define>
<define name="ccidaddress">
<attribute name="controller">
<ref name="driveController"/>
</attribute>
<optional>
<attribute name="slot">
<ref name="driveUnit"/>
</attribute>
</optional>
</define>
<!--
Devices attached to a domain.
Sub-elements such as <alias> are not documented here, as they
can only exist when generated for a live domain and are ignored
when defining a domain.
-->
<define name="devices">
<element name="devices">
<interleave>
<optional>
<ref name="emulator"/>
</optional>
<zeroOrMore>
<choice>
<ref name="disk"/>
<ref name="controller"/>
<ref name="lease"/>
<ref name="filesystem"/>
<ref name="interface"/>
<ref name="input"/>
<ref name="sound"/>
<ref name="hostdev"/>
<ref name="graphic"/>
<ref name="video"/>
<ref name="console"/>
<ref name="parallel"/>
<ref name="serial"/>
<ref name="channel"/>
<ref name="smartcard"/>
<ref name="hub"/>
<ref name="redirdev"/>
</choice>
</zeroOrMore>
<optional>
<ref name="watchdog"/>
</optional>
<optional>
<ref name="memballoon"/>
</optional>
</interleave>
</element>
</define>
<!--
A set of optional features: PAE, APIC, ACPI, and HAP support
-->
<define name="features">
<optional>
<element name="features">
<interleave>
<optional>
<element name="pae">
<empty/>
</element>
</optional>
<optional>
<element name="apic">
<empty/>
</element>
</optional>
<optional>
<element name="acpi">
<empty/>
</element>
</optional>
<optional>
<element name="hap">
<empty/>
</element>
</optional>
</interleave>
</element>
</optional>
</define>
<!--
CPU specification
-->
<define name="cpu">
<element name="cpu">
<choice>
<group>
<interleave>
<optional>
<ref name="cpuTopology"/>
</optional>
<optional>
<ref name="cpuNuma"/>
</optional>
</interleave>
</group>
<group>
<ref name="cpuMatch"/>
<interleave>
<ref name="cpuModel"/>
<optional>
<ref name="cpuVendor"/>
</optional>
<optional>
<ref name="cpuTopology"/>
</optional>
<zeroOrMore>
<ref name="cpuFeature"/>
</zeroOrMore>
<optional>
<ref name="cpuNuma"/>
</optional>
</interleave>
</group>
</choice>
</element>
</define>
<define name="cpuMatch">
<attribute name="match">
<choice>
<value>minimum</value>
<value>exact</value>
<value>strict</value>
</choice>
</attribute>
</define>
<define name="cpuModel">
<element name="model">
<text/>
</element>
</define>
<define name="cpuVendor">
<element name="vendor">
<text/>
</element>
</define>
<define name="cpuFeature">
<element name="feature">
<attribute name="policy">
<choice>
<value>force</value>
<value>require</value>
<value>optional</value>
<value>disable</value>
<value>forbid</value>
</choice>
</attribute>
<attribute name="name">
<ref name="featureName"/>
</attribute>
<empty/>
</element>
</define>
<define name="cpuTopology">
<element name="topology">
<attribute name="sockets">
<ref name="positiveInteger"/>
</attribute>
<attribute name="cores">
<ref name="positiveInteger"/>
</attribute>
<attribute name="threads">
<ref name="positiveInteger"/>
</attribute>
</element>
</define>
<define name="cpuNuma">
<element name="numa">
<oneOrMore>
<ref name="numaCell"/>
</oneOrMore>
</element>
</define>
<define name="numaCell">
<element name="cell">
<attribute name="cpus">
<ref name="cpuset"/>
</attribute>
<attribute name="memory">
<ref name="memoryKB"/>
</attribute>
</element>
</define>
<!--
System information specification:
Placeholder for system specific informations likes the ones
contained in the SMBIOS area.
Only a limited subset of entries can be modified there, so we
fully enumerate each case here.
The DMTF spec doesn't specify any string subset, just 0 terminated
byte strings, but better be safe and restrict at least the names
to avoid problems with space normalization in attribute values,
the value is kept as the element body for maximum flexibility.
A priori we allow only type 0 and type 1 string updates
-->
<define name="sysinfo">
<element name="sysinfo">
<attribute name="type">
<value>smbios</value>
</attribute>
<interleave>
<optional>
<element name="bios">
<oneOrMore>
<element name="entry">
<attribute name="name">
<ref name="sysinfo-bios-name"/>
</attribute>
<ref name="sysinfo-value"/>
</element>
</oneOrMore>
</element>
</optional>
<optional>
<element name="system">
<oneOrMore>
<element name="entry">
<attribute name="name">
<ref name="sysinfo-system-name"/>
</attribute>
<ref name="sysinfo-value"/>
</element>
</oneOrMore>
</element>
</optional>
</interleave>
</element>
</define>
<define name="sysinfo-bios-name">
<choice>
<value>vendor</value>
<value>version</value>
<value>date</value>
<value>release</value>
</choice>
</define>
<define name="sysinfo-system-name">
<choice>
<value>manufacturer</value>
<value>product</value>
<value>version</value>
<value>serial</value>
<value>uuid</value>
<value>sku</value>
<value>family</value>
</choice>
</define>
<define name="sysinfo-value">
<data type="string">
<param name='pattern'>[a-zA-Z0-9/\-_\. \(\)]+</param>
</data>
</define>
<define name="smbios">
<element name="smbios">
<attribute name="mode">
<choice>
<value>emulate</value>
<value>host</value>
<value>sysinfo</value>
</choice>
</attribute>
<empty/>
</element>
</define>
<define name="bios">
<element name="bios">
<attribute name="useserial">
<choice>
<value>yes</value>
<value>no</value>
</choice>
</attribute>
</element>
</define>
<define name="address">
<element name="address">
<choice>
<group>
<attribute name="type">
<value>pci</value>
</attribute>
<ref name="pciaddress"/>
</group>
<group>
<attribute name="type">
<value>drive</value>
</attribute>
<ref name="driveaddress"/>
</group>
<group>
<attribute name="type">
<value>virtio-serial</value>
</attribute>
<ref name="virtioserialaddress"/>
</group>
<group>
<attribute name="type">
<value>ccid</value>
</attribute>
<ref name="ccidaddress"/>
</group>
<group>
<attribute name="type">
<value>usb</value>
</attribute>
<ref name="usbportaddress"/>
</group>
<group>
<attribute name="type">
<value>spapr-vio</value>
</attribute>
<ref name="spaprvioaddress"/>
</group>
</choice>
</element>
</define>
<define name="usbmaster">
<element name="master">
<attribute name="startport">
<ref name="usbPort"/>
</attribute>
<empty/>
</element>
</define>
<define name="filterref-node-attributes">
<attribute name="filter">
<data type="NCName"/>
</attribute>
<optional>
<element name="parameter">
<attribute name="name">
<ref name="filter-param-name"/>
</attribute>
<attribute name="value">
<ref name="filter-param-value"/>
</attribute>
</element>
</optional>
</define>
<define name="deviceBoot">
<element name="boot">
<attribute name="order">
<ref name="positiveInteger"/>
</attribute>
<empty/>
</element>
</define>
<define name="diskAuth">
<element name="auth">
<attribute name="username">
<ref name="genericName"/>
</attribute>
<ref name="diskAuthSecret"/>
</element>
</define>
<define name='diskAuthSecret'>
<element name='secret'>
<attribute name='type'>
<choice>
<value>ceph</value>
</choice>
</attribute>
<choice>
<attribute name='uuid'>
<ref name="UUID"/>
</attribute>
<attribute name='usage'>
<ref name='genericName'/>
</attribute>
</choice>
</element>
</define>
<define name='diskIoTune'>
<element name="iotune">
<interleave>
<choice>
<element name="total_bytes_sec">
<data type="unsignedLong"/>
</element>
<group>
<interleave>
<optional>
<element name="read_bytes_sec">
<data type="unsignedLong"/>
</element>
</optional>
<optional>
<element name="write_bytes_sec">
<data type="unsignedLong"/>
</element>
</optional>
</interleave>
</group>
</choice>
<choice>
<element name="total_iops_sec">
<data type="unsignedLong"/>
</element>
<group>
<interleave>
<optional>
<element name="read_iops_sec">
<data type="unsignedLong"/>
</element>
</optional>
<optional>
<element name="write_iops_sec">
<data type="unsignedLong"/>
</element>
</optional>
</interleave>
</group>
</choice>
</interleave>
</element>
</define>
<!--
Optional hypervisor extensions in their own namespace:
QEmu
-->
<define name="qemucmdline">
<element name="commandline" ns="http://libvirt.org/schemas/domain/qemu/1.0">
<zeroOrMore>
<element name="arg">
<attribute name='value'/>
</element>
</zeroOrMore>
<zeroOrMore>
<element name="env">
<attribute name='name'>
<ref name="filter-param-name"/>
</attribute>
<optional>
<attribute name='value'/>
</optional>
<empty/>
</element>
</zeroOrMore>
</element>
</define>
<!--
Type library
A domain name should be made of ascii, numbers, _-+ and is non-empty
memoryKB request at least 4Mbytes though Xen will grow bigger if too low
weight currently is in range [100, 1000]
-->
<define name="cpuset">
<data type="string">
<param name="pattern">([0-9]+(-[0-9]+)?|\^[0-9]+)(,([0-9]+(-[0-9]+)?|\^[0-9]+))*</param>
</data>
</define>
<define name="countCPU">
<data type="unsignedShort">
<param name="pattern">[0-9]+</param>
<param name="minInclusive">1</param>
</data>
</define>
<define name="vcpuid">
<data type="unsignedShort">
<param name="pattern">[0-9]+</param>
</data>
</define>
<define name="cpushares">
<data type="unsignedInt">
<param name="pattern">[0-9]+</param>
</data>
</define>
<define name="cpuperiod">
<data type="unsignedLong">
<param name="pattern">[0-9]+</param>
<param name="minInclusive">1000</param>
<param name="maxInclusive">1000000</param>
</data>
</define>
<define name="cpuquota">
<data type="long">
<param name="pattern">-?[0-9]+</param>
<param name="maxInclusive">18446744073709551</param>
<param name='minInclusive'>-1</param>
</data>
</define>
<define name="PortNumber">
<data type="short">
<param name="minInclusive">-1</param>
</data>
</define>
<define name="weight">
<data type="unsignedInt">
<param name="pattern">[0-9]+</param>
<param name="minInclusive">100</param>
<param name="maxInclusive">1000</param>
</data>
</define>
<define name="memoryKB">
<data type="unsignedInt">
<param name="pattern">[0-9]+</param>
<param name="minInclusive">4000</param>
</data>
</define>
<define name="domainName">
<data type="string">
<param name="pattern">[A-Za-z0-9_\.\+\-&amp;:/]+</param>
</data>
</define>
<define name="diskSerial">
<data type="string">
<param name="pattern">[A-Za-z0-9_\.\+\-]+</param>
</data>
</define>
<define name="bridgeMode">
<data type="string">
<param name="pattern">(vepa|bridge|private|passthrough)</param>
</data>
</define>
<define name="addrIPorName">
<data type="string">
<param name="pattern">(([0-2]?[0-9]?[0-9]\.){3}[0-2]?[0-9]?[0-9])|(([0-9a-fA-F]+|:)+[0-9a-fA-F]+)|([a-zA-Z0-9_\.\+\-]*)</param>
</data>
</define>
<define name="usbId">
<data type="string">
<param name="pattern">(0x)?[0-9a-fA-F]{1,4}</param>
</data>
</define>
<define name="usbAddr">
<data type="string">
<param name="pattern">(0x)?[0-9a-fA-F]{1,3}</param>
</data>
</define>
<define name="usbPort">
<data type="string">
<param name="pattern">((0x)?[0-9a-fA-F]{1,3}\.){0,3}(0x)?[0-9a-fA-F]{1,3}</param>
</data>
</define>
<define name="pciDomain">
<data type="string">
<param name="pattern">(0x)?[0-9a-fA-F]{1,4}</param>
</data>
</define>
<define name="pciBus">
<data type="string">
<param name="pattern">(0x)?[0-9a-fA-F]{1,2}</param>
</data>
</define>
<define name="pciSlot">
<data type="string">
<param name="pattern">(0x)?[0-1]?[0-9a-fA-F]</param>
</data>
</define>
<define name="pciFunc">
<data type="string">
<param name="pattern">(0x)?[0-7]</param>
</data>
</define>
<define name="driveController">
<data type="string">
<param name="pattern">[0-9]{1,2}</param>
</data>
</define>
<define name="driveBus">
<data type="string">
<param name="pattern">[0-9]{1,2}</param>
</data>
</define>
<define name="driveUnit">
<data type="string">
<param name="pattern">[0-9]{1,2}</param>
</data>
</define>
<define name="featureName">
<data type="string">
<param name='pattern'>[a-zA-Z0-9\-_\.]+</param>
</data>
</define>
<define name="timeDelta">
<data type="string">
<param name="pattern">(-|\+)?[0-9]+</param>
</data>
</define>
<define name="timeZone">
<data type="string">
<param name="pattern">[a-zA-Z0-9_\.\+\-/]+</param>
</data>
</define>
<define name="filter-param-name">
<data type="string">
<param name="pattern">[a-zA-Z0-9_]+</param>
</data>
</define>
<define name="filter-param-value">
<data type="string">
<param name="pattern">[a-zA-Z0-9_\.:]+</param>
</data>
</define>
<define name="spaprvioReg">
<data type="string">
<param name="pattern">(0x)?[0-9a-fA-F]{1,16}</param>
</data>
</define>
</grammar>