External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2025-01-12 15:52:55 +00:00
Code Issues Packages Projects Releases Wiki Activity
libvirt/tests/qemuxml2argvdata
History
Paolo Bonzini eebbb232e6 qemu: support URI syntax for NBD 
QEMU 1.3 and newer support an alternative URI-based syntax to specify
the location of an NBD server.  Libvirt can keep on using the old
syntax in general, but only the URI syntax supports IPv6 addresses.

The URI syntax also supports relative paths to Unix sockets.  These
should never be used but aren't explicitly blocked either by the parser,
so support it just in case.

The URI syntax is intentionally compatible with Gluster's, and the
code can be reused.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-03-15 15:47:50 -06:00
..
qemuxml2argv-balloon-device-auto.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-balloon-device-auto.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-balloon-device.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-balloon-device.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-bios.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-bios.xml
test: Don't assume VNC is always available
2012-10-22 23:16:11 +08:00
qemuxml2argv-blkdeviotune.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-blkdeviotune.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-blkiotune-device.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-blkiotune-device.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-blkiotune.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-blkiotune.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-cdrom.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-cdrom.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-complex-bootindex.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-complex-bootindex.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-complex.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-complex.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-dev+order.xml
conf: add test for boot dev and order
2012-10-16 12:25:32 +02:00
qemuxml2argv-boot-floppy.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-floppy.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-menu-disable-drive-bootindex.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-menu-disable-drive-bootindex.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-menu-disable-drive.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-menu-disable-drive.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-menu-disable.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-menu-disable.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-menu-enable.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-menu-enable.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-multi.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-multi.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-network.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-network.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-order.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-order.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-bootloader.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-bootloader.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-channel-guestfwd.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-channel-guestfwd.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-channel-spicevmc-old.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-channel-spicevmc-old.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-channel-spicevmc.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-channel-spicevmc.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-channel-virtio-auto.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-channel-virtio-auto.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-channel-virtio.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-channel-virtio.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-clock-france.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-clock-france.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-clock-localtime.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-clock-localtime.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-clock-utc.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-clock-utc.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-clock-variable.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-clock-variable.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-console-compat-auto.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-console-compat-auto.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-console-compat-chardev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-console-compat-chardev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-console-compat.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-console-compat.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-console-sclp.args
S390: Enable SCLP Console in QEMU driver
2013-01-08 11:37:52 +01:00
qemuxml2argv-console-sclp.xml
S390: Enable SCLP Console in QEMU driver
2013-01-08 11:37:52 +01:00
qemuxml2argv-console-virtio-ccw.args
S390: Testcases for virtio-ccw machines
2013-03-13 18:21:50 -06:00
qemuxml2argv-console-virtio-ccw.xml
S390: Testcases for virtio-ccw machines
2013-03-13 18:21:50 -06:00
qemuxml2argv-console-virtio-many.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-console-virtio-many.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-console-virtio-s390.args
S390: Testcases for virtio-ccw machines
2013-03-13 18:21:50 -06:00
qemuxml2argv-console-virtio-s390.xml
S390: Testcases for virtio-ccw machines
2013-03-13 18:21:50 -06:00
qemuxml2argv-console-virtio.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-console-virtio.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-controller-order.args
tests: Add test for controller order
2012-11-06 10:11:35 +01:00
qemuxml2argv-controller-order.xml
tests: Add test for controller order
2012-11-06 10:11:35 +01:00
qemuxml2argv-cpu-eoi-disabled.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-eoi-disabled.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-eoi-enabled.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-eoi-enabled.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-exact1.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-exact1.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-exact2-nofallback.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-exact2-nofallback.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-exact2.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-exact2.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-fallback.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-fallback.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-host-kvmclock.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-host-kvmclock.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-host-model-fallback.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-host-model-fallback.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-host-model-nofallback.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-host-model.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-host-model.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-host-passthrough.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-host-passthrough.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-kvmclock.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-kvmclock.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-minimum1.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-minimum1.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-minimum2.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-minimum2.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-nofallback.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-numa1.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-numa1.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-numa2.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-numa2.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-qemu-host-passthrough.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-strict1.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-strict1.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-topology1.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-topology1.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-topology2.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-topology2.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-topology3.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-topology3.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-cputune.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-cputune.xml
Support emulatorpin xml parse.
2012-08-22 15:51:23 +08:00
qemuxml2argv-disk-aio.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-aio.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-blockio.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-blockio.xml
Rename iolimit to blockio.
2012-09-04 09:14:36 -06:00
qemuxml2argv-disk-cdrom-empty.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-cdrom-empty.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-cdrom-tray-no-device-cap.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-cdrom-tray-no-device-cap.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-cdrom-tray.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-cdrom-tray.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-cdrom.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-cdrom.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-copy_on_read.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-copy_on_read.xml
test: Don't assume VNC is always available
2012-10-22 23:16:11 +08:00
qemuxml2argv-disk-drive-boot-cdrom.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-boot-cdrom.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-boot-disk.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-boot-disk.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-cache-directsync.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-directsync.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-cache-unsafe.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-unsafe.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-cache-v1-none.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-v1-none.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-cache-v1-wb.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-v1-wb.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-cache-v1-wt.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-v1-wt.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-cache-v2-none.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-v2-none.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-cache-v2-wb.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-v2-wb.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-cache-v2-wt.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-v2-wt.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-error-policy-enospace.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-error-policy-enospace.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-error-policy-stop.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-error-policy-stop.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-error-policy-wreport-rignore.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-error-policy-wreport-rignore.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-fat.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-fat.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-fmt-qcow.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-fmt-qcow.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-network-gluster.args
tests: Add tests for gluster protocol based network disks support
2012-11-27 10:19:22 +01:00
qemuxml2argv-disk-drive-network-gluster.xml
tests: Add tests for gluster protocol based network disks support
2012-11-27 10:19:22 +01:00
qemuxml2argv-disk-drive-network-nbd-export.args
qemu: support named nbd exports
2013-03-15 15:12:41 -06:00
qemuxml2argv-disk-drive-network-nbd-export.xml
qemu: support named nbd exports
2013-03-15 15:12:41 -06:00
qemuxml2argv-disk-drive-network-nbd-ipv6-export.args
qemu: support URI syntax for NBD
2013-03-15 15:47:50 -06:00
qemuxml2argv-disk-drive-network-nbd-ipv6-export.xml
qemu: support URI syntax for NBD
2013-03-15 15:47:50 -06:00
qemuxml2argv-disk-drive-network-nbd-ipv6.args
qemu: support URI syntax for NBD
2013-03-15 15:47:50 -06:00
qemuxml2argv-disk-drive-network-nbd-ipv6.xml
qemu: support URI syntax for NBD
2013-03-15 15:47:50 -06:00
qemuxml2argv-disk-drive-network-nbd-unix.args
qemu: support NBD with Unix sockets
2013-03-15 15:27:56 -06:00
qemuxml2argv-disk-drive-network-nbd-unix.xml
qemu: support NBD with Unix sockets
2013-03-15 15:27:56 -06:00
qemuxml2argv-disk-drive-network-nbd.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-network-nbd.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-network-rbd-auth.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-network-rbd-auth.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-network-rbd-ceph-env.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-network-rbd-ceph-env.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-network-rbd-ipv6.args
qemu: escape ipv6 for rbd network disk hosts
2013-01-25 11:48:24 +08:00
qemuxml2argv-disk-drive-network-rbd-ipv6.xml
qemu: escape ipv6 for rbd network disk hosts
2013-01-25 11:48:24 +08:00
qemuxml2argv-disk-drive-network-rbd.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-network-rbd.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-network-sheepdog.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-network-sheepdog.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-no-boot.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-no-boot.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-readonly-disk.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-readonly-disk.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-readonly-no-device.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-readonly-no-device.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-shared.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-shared.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-floppy-tray-no-device-cap.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-floppy-tray-no-device-cap.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-floppy-tray.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-floppy-tray.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-floppy.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-floppy.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-geometry.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-geometry.xml
qemu: Disk Geometry Override Support
2012-08-21 15:35:48 -06:00
qemuxml2argv-disk-ide-drive-split.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-ide-drive-split.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-ide-wwn.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-ide-wwn.xml
qemu: Use disk wwn in qemu command line
2012-09-18 15:00:01 +08:00
qemuxml2argv-disk-ioeventfd.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-ioeventfd.xml
test: Don't assume VNC is always available
2012-10-22 23:16:11 +08:00
qemuxml2argv-disk-many.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-many.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-mirror.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-order.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-order.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-sata-device.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-sata-device.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-scsi-device-auto.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-device-auto.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-scsi-device.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-device.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-scsi-disk-split.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-disk-split.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-scsi-disk-vpd-build-error.xml
qemu: Allow the user to specify vendor and product for disk
2012-12-07 16:53:27 +08:00
qemuxml2argv-disk-scsi-disk-vpd.args
qemu: Allow the user to specify vendor and product for disk
2012-12-07 16:53:27 +08:00
qemuxml2argv-disk-scsi-disk-vpd.xml
qemu: Allow the user to specify vendor and product for disk
2012-12-07 16:53:27 +08:00
qemuxml2argv-disk-scsi-disk-wwn.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-disk-wwn.xml
qemu: Use disk wwn in qemu command line
2012-09-18 15:00:01 +08:00
qemuxml2argv-disk-scsi-lun-passthrough-sgio.xml
conf: Parse and format the new XML
2013-01-07 21:38:43 +08:00
qemuxml2argv-disk-scsi-lun-passthrough.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-lun-passthrough.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-scsi-virtio-scsi.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-virtio-scsi.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-scsi-vscsi.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-vscsi.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-snapshot.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-snapshot.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-transient.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-usb-device.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-usb-device.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-usb.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-usb.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-virtio-ccw-many.args
S390: Testcases for virtio-ccw machines
2013-03-13 18:21:50 -06:00
qemuxml2argv-disk-virtio-ccw-many.xml
S390: Testcases for virtio-ccw machines
2013-03-13 18:21:50 -06:00
qemuxml2argv-disk-virtio-ccw.args
S390: Testcases for virtio-ccw machines
2013-03-13 18:21:50 -06:00
qemuxml2argv-disk-virtio-ccw.xml
S390: Testcases for virtio-ccw machines
2013-03-13 18:21:50 -06:00
qemuxml2argv-disk-virtio-s390.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-virtio-s390.xml
S390: Adding testcases for s390
2012-07-11 11:19:05 +02:00
qemuxml2argv-disk-virtio-scsi-ccw.args
S390: Testcases for virtio-scsi and virtio-rng
2013-03-14 15:53:20 -06:00
qemuxml2argv-disk-virtio-scsi-ccw.xml
S390: Testcases for virtio-scsi and virtio-rng
2013-03-14 15:53:20 -06:00
qemuxml2argv-disk-virtio.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-virtio.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-xenvbd.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-xenvbd.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-encrypted-disk.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-encrypted-disk.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-eoi-disabled.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-eoi-disabled.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-eoi-enabled.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-eoi-enabled.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-event_idx.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-event_idx.xml
test: Don't assume VNC is always available
2012-10-22 23:16:11 +08:00
qemuxml2argv-floppy-drive-fat.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-floppy-drive-fat.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-fs9p.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-fs9p.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-graphics-listen-network2.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-graphics-listen-network.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-graphics-sdl-fullscreen.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-sdl-fullscreen.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-graphics-sdl.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-sdl.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-graphics-spice-agentmouse.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-spice-agentmouse.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-graphics-spice-compression.args
qemu: Support ram bar size for qxl devices
2013-01-22 10:40:45 -07:00
qemuxml2argv-graphics-spice-compression.xml
qemu: Support ram bar size for qxl devices
2013-01-22 10:40:45 -07:00
qemuxml2argv-graphics-spice-qxl-vga.args
qemu: Support ram bar size for qxl devices
2013-01-22 10:40:45 -07:00
qemuxml2argv-graphics-spice-qxl-vga.xml
qemu: Support ram bar size for qxl devices
2013-01-22 10:40:45 -07:00
qemuxml2argv-graphics-spice-timeout.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-spice-timeout.xml
Remove probing of CPU models when launching QEMU guests
2012-09-27 10:24:52 +01:00
qemuxml2argv-graphics-spice-usb-redir.args
domain_conf: add "usbredir" to list of valid spice channels
2012-05-08 09:22:45 -06:00
qemuxml2argv-graphics-spice-usb-redir.xml
domain_conf: add "usbredir" to list of valid spice channels
2012-05-08 09:22:45 -06:00
qemuxml2argv-graphics-spice.args
qemu: Support ram bar size for qxl devices
2013-01-22 10:40:45 -07:00
qemuxml2argv-graphics-spice.xml
qemu: Support ram bar size for qxl devices
2013-01-22 10:40:45 -07:00
qemuxml2argv-graphics-vnc-sasl.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-vnc-sasl.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-graphics-vnc-socket.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-vnc-socket.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-graphics-vnc-tls.args
Introduce a virQEMUDriverConfigPtr object
2013-02-05 15:49:25 +00:00
qemuxml2argv-graphics-vnc-tls.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-graphics-vnc.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-vnc.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-hostdev-pci-address-device.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-hostdev-pci-address-device.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-hostdev-pci-address.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-hostdev-pci-address.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-hostdev-usb-address-device-boot.args
tests: add boot order for host and redirected USB to qemu argv test
2012-11-21 18:43:15 +01:00
qemuxml2argv-hostdev-usb-address-device-boot.xml
tests: add boot order for host and redirected USB to qemu argv test
2012-11-21 18:43:15 +01:00
qemuxml2argv-hostdev-usb-address-device.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-hostdev-usb-address-device.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-hostdev-usb-address.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-hostdev-usb-address.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-hugepages.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-hugepages.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-hyperv.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-hyperv.xml
qemu: Add support for HyperV Enlightenment feature "relaxed"
2012-10-18 12:22:50 +02:00
qemuxml2argv-input-usbmouse-addr.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-input-usbmouse-addr.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-input-usbmouse.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-input-usbmouse.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-input-usbtablet.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-input-usbtablet.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-input-xen.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-input-xen.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-kvmclock.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-kvmclock.xml
Fix /domain/features setting in qemuParseCommandLine
2012-07-11 09:10:21 +02:00
qemuxml2argv-kvmclock+eoi-disabled.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-kvmclock+eoi-disabled.xml
fix kvm_pv_eoi with kvmclock
2012-10-08 20:13:55 +02:00
qemuxml2argv-lease.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-lease.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-machine-aliases1.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-machine-aliases1.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-machine-aliases2.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-machine-aliases2.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-machine-core-off.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-machine-core-off.xml
tests: Add tests for dump-core option
2012-09-20 16:41:07 +02:00
qemuxml2argv-machine-core-on.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-machine-core-on.xml
tests: Add tests for dump-core option
2012-09-20 16:41:07 +02:00
qemuxml2argv-memtune.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-memtune.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-metadata.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-metadata.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-migrate.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-migrate.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-minimal-s390.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-minimal-s390.xml
S390: Adding testcases for s390
2012-07-11 11:19:05 +02:00
qemuxml2argv-minimal.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-minimal.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-misc-acpi.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-misc-acpi.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-misc-disable-s3.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-misc-disable-s3.xml
tests: Add tests for qemu S3/S4 state configuration
2012-09-03 09:32:45 +02:00
qemuxml2argv-misc-disable-suspends.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-misc-disable-suspends.xml
tests: Add tests for qemu S3/S4 state configuration
2012-09-03 09:32:45 +02:00
qemuxml2argv-misc-enable-s4.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-misc-enable-s4.xml
tests: Add tests for qemu S3/S4 state configuration
2012-09-03 09:32:45 +02:00
qemuxml2argv-misc-no-reboot.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-misc-no-reboot.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-misc-uuid.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-misc-uuid.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-monitor-json.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-monitor-json.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-multifunction-pci-device.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-multifunction-pci-device.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-net-bandwidth.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-net-client.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-net-client.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-net-eth-ifname.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-net-eth-ifname.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-net-eth-names.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-net-eth-names.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-net-eth.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-net-eth.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-net-hostdev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-net-hostdev.xml
conf: add <vlan> element to network and domain interface elements
2012-08-15 13:10:57 -04:00
qemuxml2argv-net-mcast.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-net-mcast.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-net-openvswitch.xml
conf: add <vlan> element to network and domain interface elements
2012-08-15 13:10:57 -04:00
qemuxml2argv-net-server.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-net-server.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-net-user.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-net-user.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-net-virtio-ccw.args
S390: Testcases for virtio-ccw machines
2013-03-13 18:21:50 -06:00
qemuxml2argv-net-virtio-ccw.xml
S390: Testcases for virtio-ccw machines
2013-03-13 18:21:50 -06:00
qemuxml2argv-net-virtio-device.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-net-virtio-device.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-net-virtio-netdev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-net-virtio-netdev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-net-virtio-network-portgroup.xml
conf: add <vlan> element to network and domain interface elements
2012-08-15 13:10:57 -04:00
qemuxml2argv-net-virtio-s390.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-net-virtio-s390.xml
S390: Adding testcases for s390
2012-07-11 11:19:05 +02:00
qemuxml2argv-net-virtio.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-net-virtio.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-no-shutdown.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-no-shutdown.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-nographics-vga.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-nographics-vga.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-nographics.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-nographics.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-numad-auto-memory-vcpu-cpuset.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-numad-auto-memory-vcpu-cpuset.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-numad-auto-memory-vcpu-no-cpuset-and-placement.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-numad-auto-memory-vcpu-no-cpuset-and-placement.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-numad-auto-vcpu-no-numatune.xml
numad: Set memory policy from numad advisory nodeset
2012-05-08 16:57:32 -06:00
qemuxml2argv-numad-auto-vcpu-static-numatune.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-numad-auto-vcpu-static-numatune.xml
numad: Set memory policy from numad advisory nodeset
2012-05-08 16:57:32 -06:00
qemuxml2argv-numad-static-memory-auto-vcpu.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-numad-static-memory-auto-vcpu.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-numad-static-vcpu-no-numatune.xml
numad: Set memory policy from numad advisory nodeset
2012-05-08 16:57:32 -06:00
qemuxml2argv-numad.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-numad.xml
numad: Set memory policy from numad advisory nodeset
2012-05-08 16:57:32 -06:00
qemuxml2argv-numatune-memory.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-numatune-memory.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-parallel-parport-chardev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-parallel-parport-chardev.xml
Fix for parallel port passthrough for QEMU
2012-06-04 16:46:23 -06:00
qemuxml2argv-parallel-tcp-chardev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-parallel-tcp-chardev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-parallel-tcp.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-parallel-tcp.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-pci-rom.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-pci-rom.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-pseries-basic.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-pseries-basic.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-pseries-vio-address-clash.args
tests: Add qemuxml2argv tests for PPC64 pseries machine
2012-01-13 16:10:43 -07:00
qemuxml2argv-pseries-vio-address-clash.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-pseries-vio-user-assigned.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-pseries-vio-user-assigned.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-pseries-vio.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-pseries-vio.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-qemu-ns-no-env.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-qemu-ns-no-env.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-qemu-ns.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-qemu-ns.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-reboot-timeout-disabled.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-reboot-timeout-disabled.xml
QEMU Tests for reboot-timeout
2012-09-20 16:41:02 +02:00
qemuxml2argv-reboot-timeout-enabled.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-reboot-timeout-enabled.xml
QEMU Tests for reboot-timeout
2012-09-20 16:41:02 +02:00
qemuxml2argv-restore-v1.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-restore-v1.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-restore-v2-fd.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-restore-v2-fd.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-restore-v2.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-restore-v2.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-seclabel-dynamic-baselabel.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-seclabel-dynamic-baselabel.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-seclabel-dynamic-override.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-seclabel-dynamic-override.xml
Multiple security drivers in XML data
2012-08-20 19:13:33 +02:00
qemuxml2argv-seclabel-dynamic.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-seclabel-dynamic.xml
Multiple security drivers in XML data
2012-08-20 19:13:33 +02:00
qemuxml2argv-seclabel-none.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-seclabel-none.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-seclabel-static-relabel.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-seclabel-static-relabel.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-seclabel-static.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-seclabel-static.xml
qemu: Support numad
2012-03-15 12:24:56 +08:00
qemuxml2argv-serial-dev-chardev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-dev-chardev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-dev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-dev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-file-chardev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-file-chardev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-file.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-file.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-many-chardev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-many-chardev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-many.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-many.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-pty-chardev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-pty-chardev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-pty.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-pty.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-target-port-auto.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-tcp-chardev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-tcp-chardev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-tcp-telnet-chardev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-tcp-telnet-chardev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-tcp-telnet.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-tcp-telnet.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-tcp.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-tcp.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-udp-chardev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-udp-chardev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-udp.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-udp.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-unix-chardev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-unix-chardev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-unix.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-unix.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-vc-chardev.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-vc-chardev.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-vc.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-vc.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-smartcard-controller.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-smartcard-controller.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-smartcard-host-certificates.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-smartcard-host-certificates.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-smartcard-host.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-smartcard-host.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-smartcard-passthrough-spicevmc.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-smartcard-passthrough-spicevmc.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-smartcard-passthrough-tcp.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-smartcard-passthrough-tcp.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-smbios.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-smbios.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-smp.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-smp.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-sound-device.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-sound-device.xml
tests: add ich6 codec type test to qemuxml2argv-sound-device
2012-05-17 11:43:35 -06:00
qemuxml2argv-sound.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-sound.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-usb1-usb2.args
qemu: make PCI multifunction support more manual
2011-10-01 11:48:28 -04:00
qemuxml2argv-usb1-usb2.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-usb-controller.args
Default USB device is on slot 1 function 2
2011-09-05 15:03:27 +08:00
qemuxml2argv-usb-controller.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-usb-hub.args
Default USB device is on slot 1 function 2
2011-09-05 15:03:27 +08:00
qemuxml2argv-usb-hub.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-usb-ich9-companion.args
qemu: make PCI multifunction support more manual
2011-10-01 11:48:28 -04:00
qemuxml2argv-usb-ich9-companion.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-usb-ich9-ehci-addr.args
Fix logic for assigning PCI addresses to USB2 companion controllers
2012-05-15 17:07:34 +01:00
qemuxml2argv-usb-ich9-ehci-addr.xml
Set a sensible default master start port for ehci companion controllers
2012-05-15 17:07:34 +01:00
qemuxml2argv-usb-none-hub.xml
qemu: Add support for "none" USB controller
2012-08-02 12:13:48 +02:00
qemuxml2argv-usb-none-other.xml
qemu: Add support for "none" USB controller
2012-08-02 12:13:48 +02:00
qemuxml2argv-usb-none-usbtablet.xml
qemu: Add support for "none" USB controller
2012-08-02 12:13:48 +02:00
qemuxml2argv-usb-none.args
qemu: Add support for "none" USB controller
2012-08-02 12:13:48 +02:00
qemuxml2argv-usb-none.xml
qemu: Add support for "none" USB controller
2012-08-02 12:13:48 +02:00
qemuxml2argv-usb-piix3-controller.args
qemu: make PCI multifunction support more manual
2011-10-01 11:48:28 -04:00
qemuxml2argv-usb-piix3-controller.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-usb-ports.args
Default USB device is on slot 1 function 2
2011-09-05 15:03:27 +08:00
qemuxml2argv-usb-ports.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-usb-redir-boot.args
tests: add boot order for host and redirected USB to qemu argv test
2012-11-21 18:43:15 +01:00
qemuxml2argv-usb-redir-boot.xml
tests: add boot order for host and redirected USB to qemu argv test
2012-11-21 18:43:15 +01:00
qemuxml2argv-usb-redir-filter.args
test: add xml2argvtest for usb-redir filter and update xml schema
2012-09-13 17:22:37 +08:00
qemuxml2argv-usb-redir-filter.xml
test: add xml2argvtest for usb-redir filter and update xml schema
2012-09-13 17:22:37 +08:00
qemuxml2argv-usb-redir.args
qemu: make PCI multifunction support more manual
2011-10-01 11:48:28 -04:00
qemuxml2argv-usb-redir.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-video-device-pciaddr-default.args
qemu: Support ram bar size for qxl devices
2013-01-22 10:40:45 -07:00
qemuxml2argv-video-device-pciaddr-default.xml
tests: add one -device video device testcase
2012-12-17 14:02:58 +08:00
qemuxml2argv-virtio-lun.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-virtio-lun.xml
test: Don't assume VNC is always available
2012-10-22 23:16:11 +08:00
qemuxml2argv-virtio-rng-ccw.args
S390: Testcases for virtio-scsi and virtio-rng
2013-03-14 15:53:20 -06:00
qemuxml2argv-virtio-rng-ccw.xml
S390: Testcases for virtio-scsi and virtio-rng
2013-03-14 15:53:20 -06:00
qemuxml2argv-virtio-rng-default.args
Fix crash parsing RNG device specification
2013-03-07 12:57:10 +00:00
qemuxml2argv-virtio-rng-default.xml
Fix crash parsing RNG device specification
2013-03-07 12:57:10 +00:00
qemuxml2argv-virtio-rng-egd.args
tests: Add tests for virtio-rng device handling
2013-02-25 10:58:04 +01:00
qemuxml2argv-virtio-rng-egd.xml
tests: Add tests for virtio-rng device handling
2013-02-25 10:58:04 +01:00
qemuxml2argv-virtio-rng-random.args
virtio-rng: Add rate limiting options for virtio-RNG
2013-03-14 13:28:10 +01:00
qemuxml2argv-virtio-rng-random.xml
virtio-rng: Add rate limiting options for virtio-RNG
2013-03-14 13:28:10 +01:00
qemuxml2argv-watchdog-device.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-watchdog-device.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-watchdog-dump.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-watchdog-dump.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00
qemuxml2argv-watchdog.args
qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly
2012-10-30 08:54:32 +01:00
qemuxml2argv-watchdog.xml
numad: Always output 'placement' of <vcpu>
2012-05-08 16:57:37 -06:00