mirror of
https://gitlab.com/libvirt/libvirt.git
synced 2024-08-28 19:41:16 +00:00
Cloud-Hypervisor is a KVM virtualization using hypervisor. It functions similarly to qemu and the libvirt Cloud-Hypervisor driver uses a very similar structure to the libvirt driver. The biggest difference from the libvirt perspective is that the "monitor" socket is seperated into two sockets one that commands are issued to and one that events are notified from. The current implementation only uses the command socket (running over a REST API with json encoded data) with future changes to add support for the event socket (to better handle shutdowns from inside the VM). This patch adds support for the following initial VM actions using the Cloud-Hypervsior API: * vm.create * vm.delete * vm.boot * vm.shutdown * vm.reboot * vm.pause * vm.resume To use the Cloud-Hypervisor driver, the v15.0 release of Cloud-Hypervisor is required to be installed. Some additional notes: * The curl handle is persistent but not useful to detect ch process shutdown/crash (a future patch will address this shortcoming) * On a 64-bit host Cloud-Hypervisor needs to support PVH and so can emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and 32-bit userspace is fine, a 32-bit kernel isn't validated) Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: William Douglas <william.douglas@intel.com>
1899 lines
60 KiB
RPMSpec
1899 lines
60 KiB
RPMSpec
# -*- rpm-spec -*-
|
|
|
|
# This spec file assumes you are building on a Fedora or RHEL version
|
|
# that's still supported by the vendor. It may work on other distros
|
|
# or versions, but no effort will be made to ensure that going forward.
|
|
%define min_rhel 8
|
|
%define min_fedora 33
|
|
|
|
%define arches_qemu_kvm %{ix86} x86_64 %{power64} %{arm} aarch64 s390x
|
|
%if 0%{?rhel}
|
|
%if 0%{?rhel} > 8
|
|
%define arches_qemu_kvm x86_64 aarch64 s390x
|
|
%else
|
|
%define arches_qemu_kvm x86_64 %{power64} aarch64 s390x
|
|
%endif
|
|
%endif
|
|
|
|
%define arches_64bit x86_64 %{power64} aarch64 s390x riscv64
|
|
%define arches_x86 %{ix86} x86_64
|
|
|
|
%define arches_systemtap_64bit %{arches_64bit}
|
|
%define arches_dmidecode %{arches_x86}
|
|
%define arches_xen %{arches_x86} aarch64
|
|
%define arches_vbox %{arches_x86}
|
|
%define arches_ceph %{arches_64bit}
|
|
%define arches_zfs %{arches_x86} %{power64} %{arm}
|
|
%define arches_numactl %{arches_x86} %{power64} aarch64
|
|
%define arches_numad %{arches_x86} %{power64} aarch64
|
|
|
|
# The hypervisor drivers that run in libvirtd
|
|
%define with_qemu 0%{!?_without_qemu:1}
|
|
%define with_lxc 0%{!?_without_lxc:1}
|
|
%define with_libxl 0%{!?_without_libxl:1}
|
|
%define with_vbox 0%{!?_without_vbox:1}
|
|
|
|
%ifarch %{arches_qemu_kvm}
|
|
%define with_qemu_kvm %{with_qemu}
|
|
%else
|
|
%define with_qemu_kvm 0
|
|
%endif
|
|
|
|
%define with_qemu_tcg %{with_qemu}
|
|
|
|
# RHEL disables TCG on all architectures
|
|
%if 0%{?rhel}
|
|
%define with_qemu_tcg 0
|
|
%endif
|
|
|
|
%if ! %{with_qemu_tcg} && ! %{with_qemu_kvm}
|
|
%define with_qemu 0
|
|
%endif
|
|
|
|
# Then the hypervisor drivers that run outside libvirtd, in libvirt.so
|
|
%define with_openvz 0%{!?_without_openvz:1}
|
|
%define with_vmware 0%{!?_without_vmware:1}
|
|
%define with_esx 0%{!?_without_esx:1}
|
|
%define with_hyperv 0%{!?_without_hyperv:1}
|
|
|
|
# Then the secondary host drivers, which run inside libvirtd
|
|
%define with_storage_rbd 0%{!?_without_storage_rbd:1}
|
|
%if 0%{?fedora}
|
|
%define with_storage_sheepdog 0%{!?_without_storage_sheepdog:1}
|
|
%else
|
|
%define with_storage_sheepdog 0
|
|
%endif
|
|
|
|
%define with_storage_gluster 0%{!?_without_storage_gluster:1}
|
|
%if 0%{?rhel}
|
|
# Glusterfs has been dropped in RHEL-9, and before that
|
|
# was only enabled on arches where KVM exists
|
|
%if 0%{?rhel} > 8
|
|
%define with_storage_gluster 0
|
|
%else
|
|
%ifnarch %{arches_qemu_kvm}
|
|
%define with_storage_gluster 0
|
|
%endif
|
|
%endif
|
|
%endif
|
|
|
|
# Fedora has zfs-fuse
|
|
%if 0%{?fedora}
|
|
%define with_storage_zfs 0%{!?_without_storage_zfs:1}
|
|
%else
|
|
%define with_storage_zfs 0
|
|
%endif
|
|
|
|
%define with_storage_iscsi_direct 0%{!?_without_storage_iscsi_direct:1}
|
|
|
|
# Other optional features
|
|
%define with_numactl 0%{!?_without_numactl:1}
|
|
|
|
# A few optional bits off by default, we enable later
|
|
%define with_fuse 0
|
|
%define with_sanlock 0
|
|
%define with_numad 0
|
|
%define with_firewalld_zone 0
|
|
%define with_netcf 0
|
|
%define with_libssh2 0
|
|
%define with_wireshark 0
|
|
%define with_libssh 0
|
|
%define with_dmidecode 0
|
|
|
|
# Finally set the OS / architecture specific special cases
|
|
|
|
# Architecture-dependent features
|
|
%ifnarch %{arches_xen}
|
|
%define with_libxl 0
|
|
%endif
|
|
%ifnarch %{arches_vbox}
|
|
%define with_vbox 0
|
|
%endif
|
|
%ifnarch %{arches_numactl}
|
|
%define with_numactl 0
|
|
%endif
|
|
%ifnarch %{arches_zfs}
|
|
%define with_storage_zfs 0
|
|
%endif
|
|
%ifnarch %{arches_ceph}
|
|
%define with_storage_rbd 0
|
|
%endif
|
|
|
|
# RHEL doesn't ship many hypervisor drivers
|
|
%if 0%{?rhel}
|
|
%define with_openvz 0
|
|
%define with_vbox 0
|
|
%define with_vmware 0
|
|
%define with_libxl 0
|
|
%define with_hyperv 0
|
|
%define with_vz 0
|
|
%define with_lxc 0
|
|
%endif
|
|
|
|
%define with_firewalld_zone 0%{!?_without_firewalld_zone:1}
|
|
|
|
%if (0%{?fedora} && 0%{?fedora} < 34) || (0%{?rhel} && 0%{?rhel} < 9)
|
|
%define with_netcf 0%{!?_without_netcf:1}
|
|
%endif
|
|
|
|
|
|
# fuse is used to provide virtualized /proc for LXC
|
|
%if %{with_lxc}
|
|
%define with_fuse 0%{!?_without_fuse:1}
|
|
%endif
|
|
|
|
# Enable sanlock library for lock management with QEMU
|
|
# Sanlock is available only on arches where kvm is available for RHEL
|
|
%if 0%{?fedora}
|
|
%define with_sanlock 0%{!?_without_sanlock:1}
|
|
%endif
|
|
%if 0%{?rhel}
|
|
%ifarch %{arches_qemu_kvm}
|
|
%define with_sanlock 0%{!?_without_sanlock:1}
|
|
%endif
|
|
%endif
|
|
|
|
# Enable libssh2 transport for new enough distros
|
|
%if 0%{?fedora}
|
|
%define with_libssh2 0%{!?_without_libssh2:1}
|
|
%endif
|
|
|
|
# Enable wireshark plugins for all distros
|
|
%define with_wireshark 0%{!?_without_wireshark:1}
|
|
%define wireshark_plugindir %(pkg-config --variable plugindir wireshark)/epan
|
|
|
|
# Enable libssh transport for all distros
|
|
%define with_libssh 0%{!?_without_libssh:1}
|
|
|
|
%if %{with_qemu} || %{with_lxc}
|
|
# numad is used to manage the CPU and memory placement dynamically,
|
|
# it's not available on many non-x86 architectures.
|
|
%ifarch %{arches_numad}
|
|
%define with_numad 0%{!?_without_numad:1}
|
|
%endif
|
|
%endif
|
|
|
|
%ifarch %{arches_dmidecode}
|
|
%define with_dmidecode 0%{!?_without_dmidecode:1}
|
|
%endif
|
|
|
|
# Force QEMU to run as non-root
|
|
%define qemu_user qemu
|
|
%define qemu_group qemu
|
|
|
|
|
|
# RHEL releases provide stable tool chains and so it is safe to turn
|
|
# compiler warning into errors without being worried about frequent
|
|
# changes in reported warnings
|
|
%if 0%{?rhel}
|
|
%define enable_werror -Dwerror=true
|
|
%else
|
|
%define enable_werror -Dwerror=false
|
|
%endif
|
|
|
|
%define tls_priority "@LIBVIRT,SYSTEM"
|
|
|
|
|
|
Summary: Library providing a simple virtualization API
|
|
Name: libvirt
|
|
Version: @VERSION@
|
|
Release: 1%{?dist}
|
|
License: LGPLv2+
|
|
URL: https://libvirt.org/
|
|
|
|
%if %(echo %{version} | grep -q "\.0$"; echo $?) == 1
|
|
%define mainturl stable_updates/
|
|
%endif
|
|
Source: https://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-config-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-config-nwfilter = %{version}-%{release}
|
|
%if %{with_libxl}
|
|
Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
|
|
%endif
|
|
%if %{with_lxc}
|
|
Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
|
|
%endif
|
|
%if %{with_qemu}
|
|
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
|
|
%endif
|
|
# We had UML driver, but we've removed it.
|
|
Obsoletes: libvirt-daemon-driver-uml <= 5.0.0
|
|
Obsoletes: libvirt-daemon-uml <= 5.0.0
|
|
%if %{with_vbox}
|
|
Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
|
|
%endif
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
|
|
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
|
|
Requires: libvirt-client = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
|
|
# All build-time requirements. Run-time requirements are
|
|
# listed against each sub-RPM
|
|
BuildRequires: python3-docutils
|
|
BuildRequires: gcc
|
|
BuildRequires: meson >= 0.54.0
|
|
BuildRequires: ninja-build
|
|
BuildRequires: git
|
|
BuildRequires: perl-interpreter
|
|
BuildRequires: python3
|
|
BuildRequires: systemd-units
|
|
%if %{with_libxl}
|
|
BuildRequires: xen-devel
|
|
%endif
|
|
BuildRequires: glib2-devel >= 2.56
|
|
BuildRequires: libxml2-devel
|
|
BuildRequires: libxslt
|
|
BuildRequires: readline-devel
|
|
BuildRequires: bash-completion >= 2.0
|
|
BuildRequires: gettext
|
|
BuildRequires: libtasn1-devel
|
|
BuildRequires: gnutls-devel
|
|
BuildRequires: libattr-devel
|
|
# For pool-build probing for existing pools
|
|
BuildRequires: libblkid-devel >= 2.17
|
|
# for augparse, optionally used in testing
|
|
BuildRequires: augeas
|
|
BuildRequires: systemd-devel >= 185
|
|
BuildRequires: libpciaccess-devel >= 0.10.9
|
|
BuildRequires: yajl-devel
|
|
%if %{with_sanlock}
|
|
BuildRequires: sanlock-devel >= 2.4
|
|
%endif
|
|
BuildRequires: libpcap-devel >= 1.5.0
|
|
BuildRequires: libnl3-devel
|
|
BuildRequires: libselinux-devel
|
|
BuildRequires: dnsmasq >= 2.41
|
|
BuildRequires: iptables
|
|
BuildRequires: radvd
|
|
BuildRequires: ebtables
|
|
BuildRequires: module-init-tools
|
|
BuildRequires: cyrus-sasl-devel
|
|
BuildRequires: polkit >= 0.112
|
|
# For mount/umount in FS driver
|
|
BuildRequires: util-linux
|
|
%if %{with_qemu}
|
|
# For managing ACLs
|
|
BuildRequires: libacl-devel
|
|
# From QEMU RPMs
|
|
BuildRequires: /usr/bin/qemu-img
|
|
%endif
|
|
# For LVM drivers
|
|
BuildRequires: lvm2
|
|
# For pool type=iscsi
|
|
BuildRequires: iscsi-initiator-utils
|
|
%if %{with_storage_iscsi_direct}
|
|
# For pool type=iscsi-direct
|
|
BuildRequires: libiscsi-devel
|
|
%endif
|
|
# For disk driver
|
|
BuildRequires: parted-devel
|
|
# For Multipath support
|
|
BuildRequires: device-mapper-devel
|
|
# For XFS reflink clone support
|
|
BuildRequires: xfsprogs-devel
|
|
%if %{with_storage_rbd}
|
|
BuildRequires: librados-devel
|
|
BuildRequires: librbd-devel
|
|
%endif
|
|
%if %{with_storage_gluster}
|
|
BuildRequires: glusterfs-api-devel >= 3.4.1
|
|
BuildRequires: glusterfs-devel >= 3.4.1
|
|
%endif
|
|
%if %{with_storage_sheepdog}
|
|
BuildRequires: sheepdog
|
|
%endif
|
|
%if %{with_storage_zfs}
|
|
# Support any conforming implementation of zfs. On stock Fedora
|
|
# this is zfs-fuse, but could be zfsonlinux upstream RPMs
|
|
BuildRequires: /sbin/zfs
|
|
BuildRequires: /sbin/zpool
|
|
%endif
|
|
%if %{with_numactl}
|
|
# For QEMU/LXC numa info
|
|
BuildRequires: numactl-devel
|
|
%endif
|
|
BuildRequires: libcap-ng-devel >= 0.5.0
|
|
%if %{with_fuse}
|
|
BuildRequires: fuse-devel >= 2.8.6
|
|
%endif
|
|
%if %{with_libssh2}
|
|
BuildRequires: libssh2-devel >= 1.3.0
|
|
%endif
|
|
%if %{with_netcf}
|
|
BuildRequires: netcf-devel >= 0.2.2
|
|
%endif
|
|
%if %{with_esx}
|
|
BuildRequires: libcurl-devel
|
|
%endif
|
|
%if %{with_hyperv}
|
|
BuildRequires: libwsman-devel >= 2.6.3
|
|
%endif
|
|
BuildRequires: audit-libs-devel
|
|
# we need /usr/sbin/dtrace
|
|
BuildRequires: systemtap-sdt-devel
|
|
|
|
# For mount/umount in FS driver
|
|
BuildRequires: util-linux
|
|
# For showmount in FS driver (netfs discovery)
|
|
BuildRequires: nfs-utils
|
|
|
|
# Fedora build root suckage
|
|
BuildRequires: gawk
|
|
|
|
# For storage wiping with different algorithms
|
|
BuildRequires: scrub
|
|
|
|
%if %{with_numad}
|
|
BuildRequires: numad
|
|
%endif
|
|
|
|
%if %{with_wireshark}
|
|
BuildRequires: wireshark-devel
|
|
%endif
|
|
|
|
%if %{with_libssh}
|
|
BuildRequires: libssh-devel >= 0.7.0
|
|
%endif
|
|
|
|
BuildRequires: rpcgen
|
|
BuildRequires: libtirpc-devel
|
|
|
|
# Needed for the firewalld_reload macro
|
|
%if %{with_firewalld_zone}
|
|
BuildRequires: firewalld-filesystem
|
|
%endif
|
|
|
|
%description
|
|
Libvirt is a C toolkit to interact with the virtualization capabilities
|
|
of recent versions of Linux (and other OSes). The main package includes
|
|
the libvirtd server exporting the virtualization support.
|
|
|
|
%package docs
|
|
Summary: API reference and website documentation
|
|
|
|
%description docs
|
|
Includes the API reference for the libvirt C library, and a complete
|
|
copy of the libvirt.org website documentation.
|
|
|
|
%package daemon
|
|
Summary: Server side daemon and supporting files for libvirt library
|
|
|
|
# All runtime requirements for the libvirt package (runtime requrements
|
|
# for subpackages are listed later in those subpackages)
|
|
|
|
# The client side, i.e. shared libs are in a subpackage
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
|
|
# (client invokes 'nc' against the UNIX socket on the server)
|
|
Requires: /usr/bin/nc
|
|
|
|
# for modprobe of pci devices
|
|
Requires: module-init-tools
|
|
|
|
# for /sbin/ip
|
|
Requires: iproute
|
|
# for /sbin/tc
|
|
Requires: iproute-tc
|
|
|
|
Requires: polkit >= 0.112
|
|
%if %{with_dmidecode}
|
|
# For virConnectGetSysinfo
|
|
Requires: dmidecode
|
|
%endif
|
|
# For service management
|
|
Requires(post): systemd-units
|
|
Requires(post): systemd-sysv
|
|
Requires(preun): systemd-units
|
|
Requires(postun): systemd-units
|
|
%if %{with_numad}
|
|
Requires: numad
|
|
%endif
|
|
# libvirtd depends on 'messagebus' service
|
|
Requires: dbus
|
|
# For uid creation during pre
|
|
Requires(pre): shadow-utils
|
|
# Needed by /usr/libexec/libvirt-guests.sh script.
|
|
Requires: gettext
|
|
|
|
# Ensure smooth upgrades
|
|
Obsoletes: libvirt-admin < 7.3.0
|
|
Provides: libvirt-admin = %{version}-%{release}
|
|
Obsoletes: libvirt-bash-completion < 7.3.0
|
|
|
|
%description daemon
|
|
Server side daemon required to manage the virtualization capabilities
|
|
of recent versions of Linux. Requires a hypervisor specific sub-RPM
|
|
for specific drivers.
|
|
|
|
%package daemon-config-network
|
|
Summary: Default configuration files for the libvirtd daemon
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
|
|
%description daemon-config-network
|
|
Default configuration files for setting up NAT based networking
|
|
|
|
%package daemon-config-nwfilter
|
|
Summary: Network filter configuration files for the libvirtd daemon
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
|
|
%description daemon-config-nwfilter
|
|
Network filter configuration files for cleaning guest traffic
|
|
|
|
%package daemon-driver-network
|
|
Summary: Network driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: dnsmasq >= 2.41
|
|
Requires: radvd
|
|
Requires: iptables
|
|
|
|
%description daemon-driver-network
|
|
The network driver plugin for the libvirtd daemon, providing
|
|
an implementation of the virtual network APIs using the Linux
|
|
bridge capabilities.
|
|
|
|
|
|
%package daemon-driver-nwfilter
|
|
Summary: Nwfilter driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: iptables
|
|
Requires: ebtables
|
|
|
|
%description daemon-driver-nwfilter
|
|
The nwfilter driver plugin for the libvirtd daemon, providing
|
|
an implementation of the firewall APIs using the ebtables,
|
|
iptables and ip6tables capabilities
|
|
|
|
|
|
%package daemon-driver-nodedev
|
|
Summary: Nodedev driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
# needed for device enumeration
|
|
Requires: systemd >= 185
|
|
# For managing persistent mediated devices
|
|
Requires: mdevctl
|
|
|
|
%description daemon-driver-nodedev
|
|
The nodedev driver plugin for the libvirtd daemon, providing
|
|
an implementation of the node device APIs using the udev
|
|
capabilities.
|
|
|
|
|
|
%package daemon-driver-interface
|
|
Summary: Interface driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
%if %{with_netcf}
|
|
Requires: netcf-libs >= 0.2.2
|
|
%endif
|
|
|
|
%description daemon-driver-interface
|
|
The interface driver plugin for the libvirtd daemon, providing
|
|
an implementation of the host network interface APIs.
|
|
|
|
%package daemon-driver-secret
|
|
Summary: Secret driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
|
|
%description daemon-driver-secret
|
|
The secret driver plugin for the libvirtd daemon, providing
|
|
an implementation of the secret key APIs.
|
|
|
|
%package daemon-driver-storage-core
|
|
Summary: Storage driver plugin including base backends for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: nfs-utils
|
|
# For mkfs
|
|
Requires: util-linux
|
|
%if %{with_qemu}
|
|
# From QEMU RPMs
|
|
Requires: /usr/bin/qemu-img
|
|
%endif
|
|
%if !%{with_storage_rbd}
|
|
Obsoletes: libvirt-daemon-driver-storage-rbd < %{version}-%{release}
|
|
%endif
|
|
|
|
%description daemon-driver-storage-core
|
|
The storage driver plugin for the libvirtd daemon, providing
|
|
an implementation of the storage APIs using files, local disks, LVM, SCSI,
|
|
iSCSI, and multipath storage.
|
|
|
|
%package daemon-driver-storage-logical
|
|
Summary: Storage driver plugin for lvm volumes
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: lvm2
|
|
|
|
%description daemon-driver-storage-logical
|
|
The storage driver backend adding implementation of the storage APIs for block
|
|
volumes using lvm.
|
|
|
|
|
|
%package daemon-driver-storage-disk
|
|
Summary: Storage driver plugin for disk
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: parted
|
|
Requires: device-mapper
|
|
|
|
%description daemon-driver-storage-disk
|
|
The storage driver backend adding implementation of the storage APIs for block
|
|
volumes using the host disks.
|
|
|
|
|
|
%package daemon-driver-storage-scsi
|
|
Summary: Storage driver plugin for local scsi devices
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
|
|
%description daemon-driver-storage-scsi
|
|
The storage driver backend adding implementation of the storage APIs for scsi
|
|
host devices.
|
|
|
|
|
|
%package daemon-driver-storage-iscsi
|
|
Summary: Storage driver plugin for iscsi
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: iscsi-initiator-utils
|
|
|
|
%description daemon-driver-storage-iscsi
|
|
The storage driver backend adding implementation of the storage APIs for iscsi
|
|
volumes using the host iscsi stack.
|
|
|
|
|
|
%if %{with_storage_iscsi_direct}
|
|
%package daemon-driver-storage-iscsi-direct
|
|
Summary: Storage driver plugin for iscsi-direct
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
|
|
%description daemon-driver-storage-iscsi-direct
|
|
The storage driver backend adding implementation of the storage APIs for iscsi
|
|
volumes using libiscsi direct connection.
|
|
%endif
|
|
|
|
|
|
%package daemon-driver-storage-mpath
|
|
Summary: Storage driver plugin for multipath volumes
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: device-mapper
|
|
|
|
%description daemon-driver-storage-mpath
|
|
The storage driver backend adding implementation of the storage APIs for
|
|
multipath storage using device mapper.
|
|
|
|
|
|
%if %{with_storage_gluster}
|
|
%package daemon-driver-storage-gluster
|
|
Summary: Storage driver plugin for gluster
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
%if 0%{?fedora}
|
|
Requires: glusterfs-client >= 2.0.1
|
|
%endif
|
|
%if (0%{?fedora} || 0%{?with_storage_gluster})
|
|
Requires: /usr/sbin/gluster
|
|
%endif
|
|
|
|
%description daemon-driver-storage-gluster
|
|
The storage driver backend adding implementation of the storage APIs for gluster
|
|
volumes using libgfapi.
|
|
%endif
|
|
|
|
|
|
%if %{with_storage_rbd}
|
|
%package daemon-driver-storage-rbd
|
|
Summary: Storage driver plugin for rbd
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
|
|
%description daemon-driver-storage-rbd
|
|
The storage driver backend adding implementation of the storage APIs for rbd
|
|
volumes using the ceph protocol.
|
|
%endif
|
|
|
|
|
|
%if %{with_storage_sheepdog}
|
|
%package daemon-driver-storage-sheepdog
|
|
Summary: Storage driver plugin for sheepdog
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: sheepdog
|
|
|
|
%description daemon-driver-storage-sheepdog
|
|
The storage driver backend adding implementation of the storage APIs for
|
|
sheepdog volumes using.
|
|
%endif
|
|
|
|
|
|
%if %{with_storage_zfs}
|
|
%package daemon-driver-storage-zfs
|
|
Summary: Storage driver plugin for ZFS
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
# Support any conforming implementation of zfs
|
|
Requires: /sbin/zfs
|
|
Requires: /sbin/zpool
|
|
|
|
%description daemon-driver-storage-zfs
|
|
The storage driver backend adding implementation of the storage APIs for
|
|
ZFS volumes.
|
|
%endif
|
|
|
|
|
|
%package daemon-driver-storage
|
|
Summary: Storage driver plugin including all backends for the libvirtd daemon
|
|
Requires: libvirt-daemon-driver-storage-core = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release}
|
|
%if %{with_storage_iscsi_direct}
|
|
Requires: libvirt-daemon-driver-storage-iscsi-direct = %{version}-%{release}
|
|
%endif
|
|
%if %{with_storage_gluster}
|
|
Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release}
|
|
%endif
|
|
%if %{with_storage_rbd}
|
|
Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release}
|
|
%endif
|
|
%if %{with_storage_sheepdog}
|
|
Requires: libvirt-daemon-driver-storage-sheepdog = %{version}-%{release}
|
|
%endif
|
|
%if %{with_storage_zfs}
|
|
Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release}
|
|
%endif
|
|
|
|
%description daemon-driver-storage
|
|
The storage driver plugin for the libvirtd daemon, providing
|
|
an implementation of the storage APIs using LVM, iSCSI,
|
|
parted and more.
|
|
|
|
|
|
%if %{with_qemu}
|
|
%package daemon-driver-qemu
|
|
Summary: QEMU driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Requires: /usr/bin/qemu-img
|
|
# For image compression
|
|
Requires: gzip
|
|
Requires: bzip2
|
|
Requires: lzop
|
|
Requires: xz
|
|
Requires: systemd-container
|
|
Requires: swtpm-tools
|
|
|
|
%description daemon-driver-qemu
|
|
The qemu driver plugin for the libvirtd daemon, providing
|
|
an implementation of the hypervisor driver APIs using
|
|
QEMU
|
|
%endif
|
|
|
|
|
|
%if %{with_lxc}
|
|
%package daemon-driver-lxc
|
|
Summary: LXC driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
# There really is a hard cross-driver dependency here
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: systemd-container
|
|
|
|
%description daemon-driver-lxc
|
|
The LXC driver plugin for the libvirtd daemon, providing
|
|
an implementation of the hypervisor driver APIs using
|
|
the Linux kernel
|
|
%endif
|
|
|
|
|
|
%if %{with_vbox}
|
|
%package daemon-driver-vbox
|
|
Summary: VirtualBox driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
|
|
%description daemon-driver-vbox
|
|
The vbox driver plugin for the libvirtd daemon, providing
|
|
an implementation of the hypervisor driver APIs using
|
|
VirtualBox
|
|
%endif
|
|
|
|
|
|
%if %{with_libxl}
|
|
%package daemon-driver-libxl
|
|
Summary: Libxl driver plugin for the libvirtd daemon
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-libs = %{version}-%{release}
|
|
Obsoletes: libvirt-daemon-driver-xen < 4.3.0
|
|
|
|
%description daemon-driver-libxl
|
|
The Libxl driver plugin for the libvirtd daemon, providing
|
|
an implementation of the hypervisor driver APIs using
|
|
Libxl
|
|
%endif
|
|
|
|
|
|
|
|
%if %{with_qemu_tcg}
|
|
%package daemon-qemu
|
|
Summary: Server side daemon & driver required to run QEMU guests
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
|
|
Requires: qemu
|
|
|
|
%description daemon-qemu
|
|
Server side daemon and driver required to manage the virtualization
|
|
capabilities of the QEMU TCG emulators
|
|
%endif
|
|
|
|
|
|
%if %{with_qemu_kvm}
|
|
%package daemon-kvm
|
|
Summary: Server side daemon & driver required to run KVM guests
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-qemu = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
|
|
Requires: qemu-kvm
|
|
|
|
%description daemon-kvm
|
|
Server side daemon and driver required to manage the virtualization
|
|
capabilities of the KVM hypervisor
|
|
%endif
|
|
|
|
|
|
%if %{with_lxc}
|
|
%package daemon-lxc
|
|
Summary: Server side daemon & driver required to run LXC guests
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-lxc = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
|
|
|
|
%description daemon-lxc
|
|
Server side daemon and driver required to manage the virtualization
|
|
capabilities of LXC
|
|
%endif
|
|
|
|
|
|
%if %{with_libxl}
|
|
%package daemon-xen
|
|
Summary: Server side daemon & driver required to run XEN guests
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
%if %{with_libxl}
|
|
Requires: libvirt-daemon-driver-libxl = %{version}-%{release}
|
|
%endif
|
|
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
|
|
Requires: xen
|
|
|
|
%description daemon-xen
|
|
Server side daemon and driver required to manage the virtualization
|
|
capabilities of XEN
|
|
%endif
|
|
|
|
%if %{with_vbox}
|
|
%package daemon-vbox
|
|
Summary: Server side daemon & driver required to run VirtualBox guests
|
|
|
|
Requires: libvirt-daemon = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-vbox = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-interface = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nodedev = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-secret = %{version}-%{release}
|
|
Requires: libvirt-daemon-driver-storage = %{version}-%{release}
|
|
|
|
%description daemon-vbox
|
|
Server side daemon and driver required to manage the virtualization
|
|
capabilities of VirtualBox
|
|
%endif
|
|
|
|
%package client
|
|
Summary: Client side utilities of the libvirt library
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
# Needed by virt-pki-validate script.
|
|
Requires: gnutls-utils
|
|
|
|
# Ensure smooth upgrades
|
|
Obsoletes: libvirt-bash-completion < 7.3.0
|
|
|
|
%description client
|
|
The client binaries needed to access the virtualization
|
|
capabilities of recent versions of Linux (and other OSes).
|
|
|
|
%package libs
|
|
Summary: Client side libraries
|
|
# So remote clients can access libvirt over SSH tunnel
|
|
Requires: cyrus-sasl
|
|
# Needed by default sasl.conf - no onerous extra deps, since
|
|
# 100's of other things on a system already pull in krb5-libs
|
|
Requires: cyrus-sasl-gssapi
|
|
|
|
%description libs
|
|
Shared libraries for accessing the libvirt daemon.
|
|
|
|
%if %{with_wireshark}
|
|
%package wireshark
|
|
Summary: Wireshark dissector plugin for libvirt RPC transactions
|
|
Requires: wireshark
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
|
|
%description wireshark
|
|
Wireshark dissector plugin for better analysis of libvirt RPC traffic.
|
|
%endif
|
|
|
|
%if %{with_lxc}
|
|
%package login-shell
|
|
Summary: Login shell for connecting users to an LXC container
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
|
|
%description login-shell
|
|
Provides the set-uid virt-login-shell binary that is used to
|
|
connect a user to an LXC container when they login, by switching
|
|
namespaces.
|
|
%endif
|
|
|
|
%package devel
|
|
Summary: Libraries, includes, etc. to compile with the libvirt library
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
Requires: pkgconfig
|
|
|
|
%description devel
|
|
Include header files & development libraries for the libvirt C library.
|
|
|
|
%if %{with_sanlock}
|
|
%package lock-sanlock
|
|
Summary: Sanlock lock manager plugin for QEMU driver
|
|
Requires: sanlock >= 2.4
|
|
#for virt-sanlock-cleanup require augeas
|
|
Requires: augeas
|
|
Requires: %{name}-daemon = %{version}-%{release}
|
|
Requires: %{name}-libs = %{version}-%{release}
|
|
|
|
%description lock-sanlock
|
|
Includes the Sanlock lock manager plugin for the QEMU
|
|
driver
|
|
%endif
|
|
|
|
%package nss
|
|
Summary: Libvirt plugin for Name Service Switch
|
|
Requires: libvirt-daemon-driver-network = %{version}-%{release}
|
|
|
|
%description nss
|
|
Libvirt plugin for NSS for translating domain names into IP addresses.
|
|
|
|
|
|
%prep
|
|
|
|
%autosetup -S git_am
|
|
|
|
%build
|
|
%if 0%{?fedora} >= %{min_fedora} || 0%{?rhel} >= %{min_rhel}
|
|
%define supported_platform 1
|
|
%else
|
|
%define supported_platform 0
|
|
%endif
|
|
|
|
%if ! %{supported_platform}
|
|
echo "This RPM requires either Fedora >= %{min_fedora} or RHEL >= %{min_rhel}"
|
|
exit 1
|
|
%endif
|
|
|
|
%if %{with_qemu}
|
|
%define arg_qemu -Ddriver_qemu=enabled
|
|
%else
|
|
%define arg_qemu -Ddriver_qemu=disabled
|
|
%endif
|
|
|
|
%if %{with_openvz}
|
|
%define arg_openvz -Ddriver_openvz=enabled
|
|
%else
|
|
%define arg_openvz -Ddriver_openvz=disabled
|
|
%endif
|
|
|
|
%if %{with_lxc}
|
|
%define arg_lxc -Ddriver_lxc=enabled
|
|
%define arg_login_shell -Dlogin_shell=enabled
|
|
%else
|
|
%define arg_lxc -Ddriver_lxc=disabled
|
|
%define arg_login_shell -Dlogin_shell=disabled
|
|
%endif
|
|
|
|
%if %{with_vbox}
|
|
%define arg_vbox -Ddriver_vbox=enabled
|
|
%else
|
|
%define arg_vbox -Ddriver_vbox=disabled
|
|
%endif
|
|
|
|
%if %{with_libxl}
|
|
%define arg_libxl -Ddriver_libxl=enabled
|
|
%else
|
|
%define arg_libxl -Ddriver_libxl=disabled
|
|
%endif
|
|
|
|
%if %{with_esx}
|
|
%define arg_esx -Ddriver_esx=enabled -Dcurl=enabled
|
|
%else
|
|
%define arg_esx -Ddriver_esx=disabled -Dcurl=disabled
|
|
%endif
|
|
|
|
%if %{with_hyperv}
|
|
%define arg_hyperv -Ddriver_hyperv=enabled -Dopenwsman=enabled
|
|
%else
|
|
%define arg_hyperv -Ddriver_hyperv=disabled -Dopenwsman=disabled
|
|
%endif
|
|
|
|
%if %{with_vmware}
|
|
%define arg_vmware -Ddriver_vmware=enabled
|
|
%else
|
|
%define arg_vmware -Ddriver_vmware=disabled
|
|
%endif
|
|
|
|
%if %{with_storage_rbd}
|
|
%define arg_storage_rbd -Dstorage_rbd=enabled
|
|
%else
|
|
%define arg_storage_rbd -Dstorage_rbd=disabled
|
|
%endif
|
|
|
|
%if %{with_storage_sheepdog}
|
|
%define arg_storage_sheepdog -Dstorage_sheepdog=enabled
|
|
%else
|
|
%define arg_storage_sheepdog -Dstorage_sheepdog=disabled
|
|
%endif
|
|
|
|
%if %{with_storage_gluster}
|
|
%define arg_storage_gluster -Dstorage_gluster=enabled -Dglusterfs=enabled
|
|
%else
|
|
%define arg_storage_gluster -Dstorage_gluster=disabled -Dglusterfs=disabled
|
|
%endif
|
|
|
|
%if %{with_storage_zfs}
|
|
%define arg_storage_zfs -Dstorage_zfs=enabled
|
|
%else
|
|
%define arg_storage_zfs -Dstorage_zfs=disabled
|
|
%endif
|
|
|
|
%if %{with_numactl}
|
|
%define arg_numactl -Dnumactl=enabled
|
|
%else
|
|
%define arg_numactl -Dnumactl=disabled
|
|
%endif
|
|
|
|
%if %{with_numad}
|
|
%define arg_numad -Dnumad=enabled
|
|
%else
|
|
%define arg_numad -Dnumad=disabled
|
|
%endif
|
|
|
|
%if %{with_fuse}
|
|
%define arg_fuse -Dfuse=enabled
|
|
%else
|
|
%define arg_fuse -Dfuse=disabled
|
|
%endif
|
|
|
|
%if %{with_sanlock}
|
|
%define arg_sanlock -Dsanlock=enabled
|
|
%else
|
|
%define arg_sanlock -Dsanlock=disabled
|
|
%endif
|
|
|
|
%if %{with_firewalld_zone}
|
|
%define arg_firewalld_zone -Dfirewalld_zone=enabled
|
|
%else
|
|
%define arg_firewalld_zone -Dfirewalld_zone=disabled
|
|
%endif
|
|
|
|
%if %{with_netcf}
|
|
%define arg_netcf -Dnetcf=enabled
|
|
%else
|
|
%define arg_netcf -Dnetcf=disabled
|
|
%endif
|
|
|
|
%if %{with_wireshark}
|
|
%define arg_wireshark -Dwireshark_dissector=enabled
|
|
%else
|
|
%define arg_wireshark -Dwireshark_dissector=disabled
|
|
%endif
|
|
|
|
%if %{with_storage_iscsi_direct}
|
|
%define arg_storage_iscsi_direct -Dstorage_iscsi_direct=enabled -Dlibiscsi=enabled
|
|
%else
|
|
%define arg_storage_iscsi_direct -Dstorage_iscsi_direct=disabled -Dlibiscsi=disabled
|
|
%endif
|
|
|
|
%if %{with_libssh}
|
|
%define arg_libssh -Dlibssh=enabled
|
|
%else
|
|
%define arg_libssh -Dlibssh=disabled
|
|
%endif
|
|
|
|
%if %{with_libssh2}
|
|
%define arg_libssh2 -Dlibssh2=enabled
|
|
%else
|
|
%define arg_libssh2 -Dlibssh2=disabled
|
|
%endif
|
|
|
|
%define when %(date +"%%F-%%T")
|
|
%define where %(hostname)
|
|
%define who %{?packager}%{!?packager:Unknown}
|
|
%define arg_packager -Dpackager="%{who}, %{when}, %{where}"
|
|
%define arg_packager_version -Dpackager_version="%{release}"
|
|
|
|
%define arg_selinux_mount -Dselinux_mount="/sys/fs/selinux"
|
|
|
|
# place macros above and build commands below this comment
|
|
|
|
export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec)
|
|
|
|
%meson \
|
|
-Drunstatedir=%{_rundir} \
|
|
%{?arg_qemu} \
|
|
%{?arg_openvz} \
|
|
%{?arg_lxc} \
|
|
%{?arg_vbox} \
|
|
%{?arg_libxl} \
|
|
-Dsasl=enabled \
|
|
-Dpolkit=enabled \
|
|
-Ddriver_libvirtd=enabled \
|
|
-Ddriver_remote=enabled \
|
|
-Ddriver_test=enabled \
|
|
%{?arg_esx} \
|
|
%{?arg_hyperv} \
|
|
%{?arg_vmware} \
|
|
-Ddriver_vz=disabled \
|
|
-Ddriver_bhyve=disabled \
|
|
-Ddriver_ch=disabled \
|
|
-Dremote_default_mode=legacy \
|
|
-Ddriver_interface=enabled \
|
|
-Ddriver_network=enabled \
|
|
-Dstorage_fs=enabled \
|
|
-Dstorage_lvm=enabled \
|
|
-Dstorage_iscsi=enabled \
|
|
%{?arg_storage_iscsi_direct} \
|
|
-Dstorage_scsi=enabled \
|
|
-Dstorage_disk=enabled \
|
|
-Dstorage_mpath=enabled \
|
|
%{?arg_storage_rbd} \
|
|
%{?arg_storage_sheepdog} \
|
|
%{?arg_storage_gluster} \
|
|
%{?arg_storage_zfs} \
|
|
-Dstorage_vstorage=disabled \
|
|
%{?arg_numactl} \
|
|
%{?arg_numad} \
|
|
-Dcapng=enabled \
|
|
%{?arg_fuse} \
|
|
%{?arg_netcf} \
|
|
-Dselinux=enabled \
|
|
%{?arg_selinux_mount} \
|
|
-Dapparmor=disabled \
|
|
-Dapparmor_profiles=disabled \
|
|
-Dsecdriver_apparmor=disabled \
|
|
-Dudev=enabled \
|
|
-Dyajl=enabled \
|
|
%{?arg_sanlock} \
|
|
-Dlibpcap=enabled \
|
|
-Dlibnl=enabled \
|
|
-Daudit=enabled \
|
|
-Ddtrace=enabled \
|
|
-Dfirewalld=enabled \
|
|
%{?arg_firewalld_zone} \
|
|
%{?arg_wireshark} \
|
|
%{?arg_libssh} \
|
|
%{?arg_libssh2} \
|
|
-Dpm_utils=disabled \
|
|
-Dnss=enabled \
|
|
%{arg_packager} \
|
|
%{arg_packager_version} \
|
|
-Dqemu_user=%{qemu_user} \
|
|
-Dqemu_group=%{qemu_group} \
|
|
-Dtls_priority=%{tls_priority} \
|
|
%{?enable_werror} \
|
|
-Dexpensive_tests=enabled \
|
|
-Dinit_script=systemd \
|
|
-Ddocs=enabled \
|
|
-Dtests=enabled \
|
|
-Drpath=disabled \
|
|
%{?arg_login_shell}
|
|
|
|
%meson_build
|
|
|
|
%install
|
|
rm -fr %{buildroot}
|
|
|
|
export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec)
|
|
|
|
%meson_install
|
|
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.la
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.a
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.la
|
|
rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.a
|
|
%if %{with_wireshark}
|
|
rm -f $RPM_BUILD_ROOT%{wireshark_plugindir}/libvirt.la
|
|
%endif
|
|
|
|
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/
|
|
# We don't want to install /etc/libvirt/qemu/networks in the main %files list
|
|
# because if the admin wants to delete the default network completely, we don't
|
|
# want to end up re-incarnating it on every RPM upgrade.
|
|
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/
|
|
cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \
|
|
$RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
|
|
# libvirt saves this file with mode 0600
|
|
chmod 0600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
|
|
|
|
# nwfilter files are installed in /usr/share/libvirt and copied to /etc in %post
|
|
# to avoid verification errors on changed files in /etc
|
|
install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/
|
|
cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \
|
|
$RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/
|
|
# libvirt saves these files with mode 600
|
|
chmod 600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml
|
|
|
|
%if ! %{with_qemu}
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
|
|
%endif
|
|
%find_lang %{name}
|
|
|
|
%if ! %{with_sanlock}
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
|
|
%endif
|
|
|
|
%if ! %{with_lxc}
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
|
|
%endif
|
|
|
|
%if ! %{with_qemu}
|
|
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf
|
|
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu
|
|
%endif
|
|
%if ! %{with_lxc}
|
|
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf
|
|
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc
|
|
%endif
|
|
%if ! %{with_libxl}
|
|
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf
|
|
rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug
|
|
rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug
|
|
%endif
|
|
|
|
# Copied into libvirt-docs subpackage eventually
|
|
mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt libvirt-docs
|
|
|
|
%ifarch %{arches_systemtap_64bit}
|
|
mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \
|
|
$RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp
|
|
|
|
%if %{with_qemu}
|
|
mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \
|
|
$RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp
|
|
%endif
|
|
%endif
|
|
|
|
%check
|
|
# Building on slow archs, like emulated s390x in Fedora copr, requires
|
|
# raising the test timeout
|
|
VIR_TEST_DEBUG=1 %meson_test --no-suite syntax-check --timeout-multiplier 10
|
|
|
|
%pre daemon
|
|
# 'libvirt' group is just to allow password-less polkit access to
|
|
# libvirtd. The uid number is irrelevant, so we use dynamic allocation
|
|
# described at the above link.
|
|
getent group libvirt >/dev/null || groupadd -r libvirt
|
|
|
|
exit 0
|
|
|
|
%post daemon
|
|
|
|
%systemd_post virtlockd.socket virtlockd-admin.socket
|
|
%systemd_post virtlogd.socket virtlogd-admin.socket
|
|
%systemd_post libvirtd.socket libvirtd-ro.socket libvirtd-admin.socket
|
|
%systemd_post libvirtd-tcp.socket libvirtd-tls.socket
|
|
%systemd_post libvirtd.service
|
|
%systemd_post libvirt-guests.service
|
|
|
|
# request daemon restart in posttrans
|
|
mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || :
|
|
touch %{_localstatedir}/lib/rpm-state/libvirt/restart || :
|
|
|
|
%preun daemon
|
|
%systemd_preun libvirtd.service
|
|
%systemd_preun libvirtd-tcp.socket libvirtd-tls.socket
|
|
%systemd_preun libvirtd.socket libvirtd-ro.socket libvirtd-admin.socket
|
|
%systemd_preun virtlogd.socket virtlogd-admin.socket virtlogd.service
|
|
%systemd_preun virtlockd.socket virtlockd-admin.socket virtlockd.service
|
|
%systemd_preun libvirt-guests.service
|
|
|
|
%postun daemon
|
|
/bin/systemctl daemon-reload >/dev/null 2>&1 || :
|
|
if [ $1 -ge 1 ] ; then
|
|
/bin/systemctl reload-or-try-restart virtlockd.service >/dev/null 2>&1 || :
|
|
/bin/systemctl reload-or-try-restart virtlogd.service >/dev/null 2>&1 || :
|
|
fi
|
|
%systemd_postun libvirt-guests.service
|
|
|
|
# In upgrade scenario we must explicitly enable virtlockd/virtlogd
|
|
# sockets, if libvirtd is already enabled and start them if
|
|
# libvirtd is running, otherwise you'll get failures to start
|
|
# guests
|
|
%triggerpostun daemon -- libvirt-daemon < 1.3.0
|
|
if [ $1 -ge 1 ] ; then
|
|
/bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 &&
|
|
/bin/systemctl enable virtlogd.socket virtlogd-admin.socket || :
|
|
/bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 &&
|
|
/bin/systemctl start virtlogd.socket virtlogd-admin.socket || :
|
|
fi
|
|
|
|
%posttrans daemon
|
|
if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then
|
|
# See if user has previously modified their install to
|
|
# tell libvirtd to use --listen
|
|
grep -E '^LIBVIRTD_ARGS=.*--listen' /etc/sysconfig/libvirtd 1>/dev/null 2>&1
|
|
if test $? = 0
|
|
then
|
|
# Then lets keep honouring --listen and *not* use
|
|
# systemd socket activation, because switching things
|
|
# might confuse mgmt tool like puppet/ansible that
|
|
# expect the old style libvirtd
|
|
/bin/systemctl mask libvirtd.socket >/dev/null 2>&1 || :
|
|
/bin/systemctl mask libvirtd-ro.socket >/dev/null 2>&1 || :
|
|
/bin/systemctl mask libvirtd-admin.socket >/dev/null 2>&1 || :
|
|
/bin/systemctl mask libvirtd-tls.socket >/dev/null 2>&1 || :
|
|
/bin/systemctl mask libvirtd-tcp.socket >/dev/null 2>&1 || :
|
|
else
|
|
# Old libvirtd owns the sockets and will delete them on
|
|
# shutdown. Can't use a try-restart as libvirtd will simply
|
|
# own the sockets again when it comes back up. Thus we must
|
|
# do this particular ordering, so that we get libvirtd
|
|
# running with socket activation in use
|
|
/bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1
|
|
if test $? = 0
|
|
then
|
|
/bin/systemctl stop libvirtd.service >/dev/null 2>&1 || :
|
|
|
|
/bin/systemctl try-restart libvirtd.socket >/dev/null 2>&1 || :
|
|
/bin/systemctl try-restart libvirtd-ro.socket >/dev/null 2>&1 || :
|
|
/bin/systemctl try-restart libvirtd-admin.socket >/dev/null 2>&1 || :
|
|
|
|
/bin/systemctl start libvirtd.service >/dev/null 2>&1 || :
|
|
fi
|
|
fi
|
|
fi
|
|
rm -rf %{_localstatedir}/lib/rpm-state/libvirt || :
|
|
|
|
%post daemon-driver-network
|
|
%if %{with_firewalld_zone}
|
|
%firewalld_reload
|
|
%endif
|
|
|
|
%postun daemon-driver-network
|
|
%if %{with_firewalld_zone}
|
|
%firewalld_reload
|
|
%endif
|
|
|
|
%post daemon-config-network
|
|
if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then
|
|
# see if the network used by default network creates a conflict,
|
|
# and try to resolve it
|
|
# NB: 192.168.122.0/24 is used in the default.xml template file;
|
|
# do not modify any of those values here without also modifying
|
|
# them in the template.
|
|
orig_sub=122
|
|
sub=${orig_sub}
|
|
nl='
|
|
'
|
|
routes="${nl}$(ip route show | cut -d' ' -f1)${nl}"
|
|
case ${routes} in
|
|
*"${nl}192.168.${orig_sub}.0/24${nl}"*)
|
|
# there was a match, so we need to look for an unused subnet
|
|
for new_sub in $(seq 124 254); do
|
|
case ${routes} in
|
|
*"${nl}192.168.${new_sub}.0/24${nl}"*)
|
|
;;
|
|
*)
|
|
sub=$new_sub
|
|
break;
|
|
;;
|
|
esac
|
|
done
|
|
;;
|
|
*)
|
|
;;
|
|
esac
|
|
|
|
sed -e "s/${orig_sub}/${sub}/g" \
|
|
< %{_datadir}/libvirt/networks/default.xml \
|
|
> %{_sysconfdir}/libvirt/qemu/networks/default.xml
|
|
ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
|
|
# libvirt saves this file with mode 0600
|
|
chmod 0600 %{_sysconfdir}/libvirt/qemu/networks/default.xml
|
|
|
|
# Make sure libvirt picks up the new network defininiton
|
|
mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || :
|
|
touch %{_localstatedir}/lib/rpm-state/libvirt/restart || :
|
|
fi
|
|
|
|
%posttrans daemon-config-network
|
|
if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then
|
|
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
|
|
fi
|
|
rm -rf %{_localstatedir}/lib/rpm-state/libvirt || :
|
|
|
|
%post daemon-config-nwfilter
|
|
for datadir_file in %{_datadir}/libvirt/nwfilter/*.xml; do
|
|
sysconfdir_file=%{_sysconfdir}/libvirt/nwfilter/$(basename "$datadir_file")
|
|
if [ ! -f "$sysconfdir_file" ]; then
|
|
# libvirt saves these files with mode 600
|
|
install -m 0600 "$datadir_file" "$sysconfdir_file"
|
|
fi
|
|
done
|
|
# Make sure libvirt picks up the new nwfilter defininitons
|
|
mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || :
|
|
touch %{_localstatedir}/lib/rpm-state/libvirt/restart || :
|
|
|
|
%posttrans daemon-config-nwfilter
|
|
if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then
|
|
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
|
|
fi
|
|
rm -rf %{_localstatedir}/lib/rpm-state/libvirt || :
|
|
|
|
|
|
%if %{with_qemu}
|
|
%pre daemon-driver-qemu
|
|
# We want soft static allocation of well-known ids, as disk images
|
|
# are commonly shared across NFS mounts by id rather than name; see
|
|
# https://fedoraproject.org/wiki/Packaging:UsersAndGroups
|
|
getent group kvm >/dev/null || groupadd -f -g 36 -r kvm
|
|
getent group qemu >/dev/null || groupadd -f -g 107 -r qemu
|
|
if ! getent passwd qemu >/dev/null; then
|
|
if ! getent passwd 107 >/dev/null; then
|
|
useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
|
|
else
|
|
useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu
|
|
fi
|
|
fi
|
|
exit 0
|
|
%endif
|
|
|
|
%if %{with_lxc}
|
|
%pre login-shell
|
|
getent group virtlogin >/dev/null || groupadd -r virtlogin
|
|
exit 0
|
|
%endif
|
|
|
|
%files
|
|
|
|
%files docs
|
|
%doc AUTHORS.rst NEWS.rst README.rst
|
|
%doc libvirt-docs/*
|
|
|
|
%files daemon
|
|
|
|
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/
|
|
|
|
%{_unitdir}/libvirtd.service
|
|
%{_unitdir}/libvirtd.socket
|
|
%{_unitdir}/libvirtd-ro.socket
|
|
%{_unitdir}/libvirtd-admin.socket
|
|
%{_unitdir}/libvirtd-tcp.socket
|
|
%{_unitdir}/libvirtd-tls.socket
|
|
%{_unitdir}/virtproxyd.service
|
|
%{_unitdir}/virtproxyd.socket
|
|
%{_unitdir}/virtproxyd-ro.socket
|
|
%{_unitdir}/virtproxyd-admin.socket
|
|
%{_unitdir}/virtproxyd-tcp.socket
|
|
%{_unitdir}/virtproxyd-tls.socket
|
|
%{_unitdir}/virt-guest-shutdown.target
|
|
%{_unitdir}/virtlogd.service
|
|
%{_unitdir}/virtlogd.socket
|
|
%{_unitdir}/virtlogd-admin.socket
|
|
%{_unitdir}/virtlockd.service
|
|
%{_unitdir}/virtlockd.socket
|
|
%{_unitdir}/virtlockd-admin.socket
|
|
%{_unitdir}/libvirt-guests.service
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtproxyd
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtlogd
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtlockd
|
|
%config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtproxyd.conf
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf
|
|
%config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests
|
|
%config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf
|
|
|
|
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
|
|
%dir %{_datadir}/libvirt/
|
|
|
|
%ghost %dir %{_rundir}/libvirt/
|
|
|
|
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
|
|
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/
|
|
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/
|
|
%dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/
|
|
|
|
|
|
%dir %attr(0755, root, root) %{_libdir}/libvirt/
|
|
%dir %attr(0755, root, root) %{_libdir}/libvirt/connection-driver/
|
|
%dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver
|
|
%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so
|
|
|
|
%{_datadir}/augeas/lenses/libvirtd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_libvirtd.aug
|
|
%{_datadir}/augeas/lenses/virtlogd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtlogd.aug
|
|
%{_datadir}/augeas/lenses/virtlockd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtlockd.aug
|
|
%{_datadir}/augeas/lenses/virtproxyd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtproxyd.aug
|
|
%{_datadir}/augeas/lenses/libvirt_lockd.aug
|
|
%if %{with_qemu}
|
|
%{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug
|
|
%endif
|
|
|
|
%{_datadir}/polkit-1/actions/org.libvirt.unix.policy
|
|
%{_datadir}/polkit-1/actions/org.libvirt.api.policy
|
|
%{_datadir}/polkit-1/rules.d/50-libvirt.rules
|
|
|
|
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
|
|
|
|
%attr(0755, root, root) %{_libexecdir}/libvirt_iohelper
|
|
|
|
%attr(0755, root, root) %{_bindir}/virt-ssh-helper
|
|
|
|
%attr(0755, root, root) %{_sbindir}/libvirtd
|
|
%attr(0755, root, root) %{_sbindir}/virtproxyd
|
|
%attr(0755, root, root) %{_sbindir}/virtlogd
|
|
%attr(0755, root, root) %{_sbindir}/virtlockd
|
|
%attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh
|
|
|
|
%{_mandir}/man1/virt-admin.1*
|
|
%{_mandir}/man1/virt-host-validate.1*
|
|
%{_mandir}/man8/libvirtd.8*
|
|
%{_mandir}/man8/virtlogd.8*
|
|
%{_mandir}/man8/virtlockd.8*
|
|
%{_mandir}/man8/virtproxyd.8*
|
|
%{_mandir}/man7/virkey*.7*
|
|
|
|
%{_bindir}/virt-host-validate
|
|
%{_bindir}/virt-admin
|
|
%{_datadir}/bash-completion/completions/virt-admin
|
|
|
|
%files daemon-config-network
|
|
%dir %{_datadir}/libvirt/networks/
|
|
%{_datadir}/libvirt/networks/default.xml
|
|
%ghost %{_sysconfdir}/libvirt/qemu/networks/default.xml
|
|
%ghost %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
|
|
|
|
%files daemon-config-nwfilter
|
|
%dir %{_datadir}/libvirt/nwfilter/
|
|
%{_datadir}/libvirt/nwfilter/*.xml
|
|
%ghost %{_sysconfdir}/libvirt/nwfilter/*.xml
|
|
|
|
%files daemon-driver-interface
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtinterfaced
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtinterfaced.conf
|
|
%{_datadir}/augeas/lenses/virtinterfaced.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtinterfaced.aug
|
|
%{_unitdir}/virtinterfaced.service
|
|
%{_unitdir}/virtinterfaced.socket
|
|
%{_unitdir}/virtinterfaced-ro.socket
|
|
%{_unitdir}/virtinterfaced-admin.socket
|
|
%attr(0755, root, root) %{_sbindir}/virtinterfaced
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so
|
|
%{_mandir}/man8/virtinterfaced.8*
|
|
|
|
%files daemon-driver-network
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtnetworkd
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtnetworkd.conf
|
|
%{_datadir}/augeas/lenses/virtnetworkd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtnetworkd.aug
|
|
%{_unitdir}/virtnetworkd.service
|
|
%{_unitdir}/virtnetworkd.socket
|
|
%{_unitdir}/virtnetworkd-ro.socket
|
|
%{_unitdir}/virtnetworkd-admin.socket
|
|
%attr(0755, root, root) %{_sbindir}/virtnetworkd
|
|
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
|
|
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/
|
|
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart
|
|
%ghost %dir %{_rundir}/libvirt/network/
|
|
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
|
|
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/
|
|
%attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_network.so
|
|
%{_mandir}/man8/virtnetworkd.8*
|
|
|
|
%if %{with_firewalld_zone}
|
|
%{_prefix}/lib/firewalld/zones/libvirt.xml
|
|
%endif
|
|
|
|
%files daemon-driver-nodedev
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtnodedevd
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtnodedevd.conf
|
|
%{_datadir}/augeas/lenses/virtnodedevd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtnodedevd.aug
|
|
%{_unitdir}/virtnodedevd.service
|
|
%{_unitdir}/virtnodedevd.socket
|
|
%{_unitdir}/virtnodedevd-ro.socket
|
|
%{_unitdir}/virtnodedevd-admin.socket
|
|
%attr(0755, root, root) %{_sbindir}/virtnodedevd
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so
|
|
%{_mandir}/man8/virtnodedevd.8*
|
|
|
|
%files daemon-driver-nwfilter
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtnwfilterd
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtnwfilterd.conf
|
|
%{_datadir}/augeas/lenses/virtnwfilterd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtnwfilterd.aug
|
|
%{_unitdir}/virtnwfilterd.service
|
|
%{_unitdir}/virtnwfilterd.socket
|
|
%{_unitdir}/virtnwfilterd-ro.socket
|
|
%{_unitdir}/virtnwfilterd-admin.socket
|
|
%attr(0755, root, root) %{_sbindir}/virtnwfilterd
|
|
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/
|
|
%ghost %dir %{_rundir}/libvirt/network/
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so
|
|
%{_mandir}/man8/virtnwfilterd.8*
|
|
|
|
%files daemon-driver-secret
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtsecretd
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtsecretd.conf
|
|
%{_datadir}/augeas/lenses/virtsecretd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtsecretd.aug
|
|
%{_unitdir}/virtsecretd.service
|
|
%{_unitdir}/virtsecretd.socket
|
|
%{_unitdir}/virtsecretd-ro.socket
|
|
%{_unitdir}/virtsecretd-admin.socket
|
|
%attr(0755, root, root) %{_sbindir}/virtsecretd
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so
|
|
%{_mandir}/man8/virtsecretd.8*
|
|
|
|
%files daemon-driver-storage
|
|
|
|
%files daemon-driver-storage-core
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtstoraged
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtstoraged.conf
|
|
%{_datadir}/augeas/lenses/virtstoraged.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtstoraged.aug
|
|
%{_unitdir}/virtstoraged.service
|
|
%{_unitdir}/virtstoraged.socket
|
|
%{_unitdir}/virtstoraged-ro.socket
|
|
%{_unitdir}/virtstoraged-admin.socket
|
|
%attr(0755, root, root) %{_sbindir}/virtstoraged
|
|
%attr(0755, root, root) %{_libexecdir}/libvirt_parthelper
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_fs.so
|
|
%{_libdir}/%{name}/storage-file/libvirt_storage_file_fs.so
|
|
%{_mandir}/man8/virtstoraged.8*
|
|
|
|
%files daemon-driver-storage-disk
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_disk.so
|
|
|
|
%files daemon-driver-storage-logical
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_logical.so
|
|
|
|
%files daemon-driver-storage-scsi
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_scsi.so
|
|
|
|
%files daemon-driver-storage-iscsi
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi.so
|
|
|
|
%if %{with_storage_iscsi_direct}
|
|
%files daemon-driver-storage-iscsi-direct
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi-direct.so
|
|
%endif
|
|
|
|
%files daemon-driver-storage-mpath
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_mpath.so
|
|
|
|
%if %{with_storage_gluster}
|
|
%files daemon-driver-storage-gluster
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_gluster.so
|
|
%{_libdir}/%{name}/storage-file/libvirt_storage_file_gluster.so
|
|
%endif
|
|
|
|
%if %{with_storage_rbd}
|
|
%files daemon-driver-storage-rbd
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_rbd.so
|
|
%endif
|
|
|
|
%if %{with_storage_sheepdog}
|
|
%files daemon-driver-storage-sheepdog
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_sheepdog.so
|
|
%endif
|
|
|
|
%if %{with_storage_zfs}
|
|
%files daemon-driver-storage-zfs
|
|
%{_libdir}/%{name}/storage-backend/libvirt_storage_backend_zfs.so
|
|
%endif
|
|
|
|
%if %{with_qemu}
|
|
%files daemon-driver-qemu
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtqemud
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtqemud.conf
|
|
%{_datadir}/augeas/lenses/virtqemud.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtqemud.aug
|
|
%{_unitdir}/virtqemud.service
|
|
%{_unitdir}/virtqemud.socket
|
|
%{_unitdir}/virtqemud-ro.socket
|
|
%{_unitdir}/virtqemud-admin.socket
|
|
%attr(0755, root, root) %{_sbindir}/virtqemud
|
|
%dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/
|
|
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
|
|
%config(noreplace) %{_sysconfdir}/libvirt/qemu.conf
|
|
%config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf
|
|
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu
|
|
%ghost %dir %{_rundir}/libvirt/qemu/
|
|
%dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
|
|
%dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
|
|
%{_datadir}/augeas/lenses/libvirtd_qemu.aug
|
|
%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so
|
|
%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/swtpm/
|
|
%dir %attr(0730, tss, tss) %{_localstatedir}/log/swtpm/libvirt/qemu/
|
|
%{_bindir}/virt-qemu-run
|
|
%{_mandir}/man1/virt-qemu-run.1*
|
|
%{_mandir}/man8/virtqemud.8*
|
|
%endif
|
|
|
|
%if %{with_lxc}
|
|
%files daemon-driver-lxc
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtlxcd
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtlxcd.conf
|
|
%{_datadir}/augeas/lenses/virtlxcd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtlxcd.aug
|
|
%{_unitdir}/virtlxcd.service
|
|
%{_unitdir}/virtlxcd.socket
|
|
%{_unitdir}/virtlxcd-ro.socket
|
|
%{_unitdir}/virtlxcd-admin.socket
|
|
%attr(0755, root, root) %{_sbindir}/virtlxcd
|
|
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/
|
|
%config(noreplace) %{_sysconfdir}/libvirt/lxc.conf
|
|
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc
|
|
%ghost %dir %{_rundir}/libvirt/lxc/
|
|
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
|
|
%{_datadir}/augeas/lenses/libvirtd_lxc.aug
|
|
%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug
|
|
%attr(0755, root, root) %{_libexecdir}/libvirt_lxc
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so
|
|
%{_mandir}/man8/virtlxcd.8*
|
|
%endif
|
|
|
|
%if %{with_libxl}
|
|
%files daemon-driver-libxl
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtxend
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtxend.conf
|
|
%{_datadir}/augeas/lenses/virtxend.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtxend.aug
|
|
%{_unitdir}/virtxend.service
|
|
%{_unitdir}/virtxend.socket
|
|
%{_unitdir}/virtxend-ro.socket
|
|
%{_unitdir}/virtxend-admin.socket
|
|
%attr(0755, root, root) %{_sbindir}/virtxend
|
|
%config(noreplace) %{_sysconfdir}/libvirt/libxl.conf
|
|
%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl
|
|
%config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf
|
|
%{_datadir}/augeas/lenses/libvirtd_libxl.aug
|
|
%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug
|
|
%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/
|
|
%ghost %dir %{_rundir}/libvirt/libxl/
|
|
%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so
|
|
%{_mandir}/man8/virtxend.8*
|
|
%endif
|
|
|
|
%if %{with_vbox}
|
|
%files daemon-driver-vbox
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/virtvboxd
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virtvboxd.conf
|
|
%{_datadir}/augeas/lenses/virtvboxd.aug
|
|
%{_datadir}/augeas/lenses/tests/test_virtvboxd.aug
|
|
%{_unitdir}/virtvboxd.service
|
|
%{_unitdir}/virtvboxd.socket
|
|
%{_unitdir}/virtvboxd-ro.socket
|
|
%{_unitdir}/virtvboxd-admin.socket
|
|
%attr(0755, root, root) %{_sbindir}/virtvboxd
|
|
%{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so
|
|
%{_mandir}/man8/virtvboxd.8*
|
|
%endif
|
|
|
|
%if %{with_qemu_tcg}
|
|
%files daemon-qemu
|
|
%endif
|
|
|
|
%if %{with_qemu_kvm}
|
|
%files daemon-kvm
|
|
%endif
|
|
|
|
%if %{with_lxc}
|
|
%files daemon-lxc
|
|
%endif
|
|
|
|
%if %{with_libxl}
|
|
%files daemon-xen
|
|
%endif
|
|
|
|
%if %{with_vbox}
|
|
%files daemon-vbox
|
|
%endif
|
|
|
|
%if %{with_sanlock}
|
|
%files lock-sanlock
|
|
%if %{with_qemu}
|
|
%config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf
|
|
%endif
|
|
%if %{with_libxl}
|
|
%config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf
|
|
%endif
|
|
%attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so
|
|
%{_datadir}/augeas/lenses/libvirt_sanlock.aug
|
|
%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug
|
|
%dir %attr(0770, root, sanlock) %{_localstatedir}/lib/libvirt/sanlock
|
|
%{_sbindir}/virt-sanlock-cleanup
|
|
%{_mandir}/man8/virt-sanlock-cleanup.8*
|
|
%attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper
|
|
%endif
|
|
|
|
%files client
|
|
%{_mandir}/man1/virsh.1*
|
|
%{_mandir}/man1/virt-xml-validate.1*
|
|
%{_mandir}/man1/virt-pki-validate.1*
|
|
%{_bindir}/virsh
|
|
%{_bindir}/virt-xml-validate
|
|
%{_bindir}/virt-pki-validate
|
|
|
|
%{_datadir}/bash-completion/completions/virsh
|
|
|
|
%files libs -f %{name}.lang
|
|
%license COPYING COPYING.LESSER
|
|
%config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf
|
|
%config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf
|
|
%{_libdir}/libvirt.so.*
|
|
%{_libdir}/libvirt-qemu.so.*
|
|
%{_libdir}/libvirt-lxc.so.*
|
|
%{_libdir}/libvirt-admin.so.*
|
|
%dir %{_datadir}/libvirt/
|
|
%dir %{_datadir}/libvirt/schemas/
|
|
%dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/
|
|
|
|
%{_datadir}/systemtap/tapset/libvirt_probes*.stp
|
|
%{_datadir}/systemtap/tapset/libvirt_functions.stp
|
|
%if %{with_qemu}
|
|
%{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
|
|
%endif
|
|
|
|
%{_datadir}/libvirt/schemas/*.rng
|
|
|
|
%{_datadir}/libvirt/cpu_map/*.xml
|
|
|
|
%{_datadir}/libvirt/test-screenshot.png
|
|
|
|
%if %{with_wireshark}
|
|
%files wireshark
|
|
%{wireshark_plugindir}/libvirt.so
|
|
%endif
|
|
|
|
%files nss
|
|
%{_libdir}/libnss_libvirt.so.2
|
|
%{_libdir}/libnss_libvirt_guest.so.2
|
|
|
|
%if %{with_lxc}
|
|
%files login-shell
|
|
%attr(4750, root, virtlogin) %{_bindir}/virt-login-shell
|
|
%{_libexecdir}/virt-login-shell-helper
|
|
%config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf
|
|
%{_mandir}/man1/virt-login-shell.1*
|
|
%endif
|
|
|
|
%files devel
|
|
%{_libdir}/libvirt.so
|
|
%{_libdir}/libvirt-admin.so
|
|
%{_libdir}/libvirt-qemu.so
|
|
%{_libdir}/libvirt-lxc.so
|
|
%dir %{_includedir}/libvirt
|
|
%{_includedir}/libvirt/virterror.h
|
|
%{_includedir}/libvirt/libvirt.h
|
|
%{_includedir}/libvirt/libvirt-admin.h
|
|
%{_includedir}/libvirt/libvirt-common.h
|
|
%{_includedir}/libvirt/libvirt-domain.h
|
|
%{_includedir}/libvirt/libvirt-domain-checkpoint.h
|
|
%{_includedir}/libvirt/libvirt-domain-snapshot.h
|
|
%{_includedir}/libvirt/libvirt-event.h
|
|
%{_includedir}/libvirt/libvirt-host.h
|
|
%{_includedir}/libvirt/libvirt-interface.h
|
|
%{_includedir}/libvirt/libvirt-network.h
|
|
%{_includedir}/libvirt/libvirt-nodedev.h
|
|
%{_includedir}/libvirt/libvirt-nwfilter.h
|
|
%{_includedir}/libvirt/libvirt-secret.h
|
|
%{_includedir}/libvirt/libvirt-storage.h
|
|
%{_includedir}/libvirt/libvirt-stream.h
|
|
%{_includedir}/libvirt/libvirt-qemu.h
|
|
%{_includedir}/libvirt/libvirt-lxc.h
|
|
%{_libdir}/pkgconfig/libvirt.pc
|
|
%{_libdir}/pkgconfig/libvirt-admin.pc
|
|
%{_libdir}/pkgconfig/libvirt-qemu.pc
|
|
%{_libdir}/pkgconfig/libvirt-lxc.pc
|
|
|
|
%dir %{_datadir}/libvirt/api/
|
|
%{_datadir}/libvirt/api/libvirt-api.xml
|
|
%{_datadir}/libvirt/api/libvirt-admin-api.xml
|
|
%{_datadir}/libvirt/api/libvirt-qemu-api.xml
|
|
%{_datadir}/libvirt/api/libvirt-lxc-api.xml
|
|
|
|
|
|
%changelog
|