libvirt/tests/qemuxml2argvdata
Osier Yang cdb9789559 conf: Generate address for scsi host device automatically
With unknown good reasons, the attribute "bus" of scsi device
address is always set to 0, same for attribute "target". (See
virDomainDiskDefAssignAddress).

Though we might need to change the algorithm to honor "bus"
and "target" too, that's a different issue. The address generator
for scsi host device in this patch just follows the unknown
good reasons, only considering the "controller" and "unit".
It walks through all scsi controllers and their units, to see
if the address $controller:0:0:$unit can be used (if not used
by any disk or scsi host device yet), if found one, it sits on
it, otherwise, it creates a new controller (actually the controller
is implicitly created by someone else), and sits on
$new_controller:0:0:0 instead.
2013-06-01 10:00:23 +08:00
..
qemuxml2argv-balloon-device-auto.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-balloon-device-auto.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-balloon-device.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-balloon-device.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-bios.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-bios.xml test: Don't assume VNC is always available 2012-10-22 23:16:11 +08:00
qemuxml2argv-blkdeviotune.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-blkdeviotune.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-blkiotune-device.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-blkiotune-device.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-blkiotune.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-blkiotune.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-boot-cdrom.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-cdrom.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-boot-complex-bootindex.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-complex-bootindex.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-complex.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-complex.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-dev+order.xml conf: add test for boot dev and order 2012-10-16 12:25:32 +02:00
qemuxml2argv-boot-floppy.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-floppy.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-boot-menu-disable-drive-bootindex.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-menu-disable-drive-bootindex.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-menu-disable-drive.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-menu-disable-drive.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-menu-disable.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-menu-disable.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-boot-menu-enable.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-menu-enable.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-boot-multi.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-multi.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-boot-network.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-network.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-boot-order.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-boot-order.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-bootloader.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-bootloader.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-channel-guestfwd.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-channel-guestfwd.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-channel-spicevmc-old.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-channel-spicevmc-old.xml qemu: Support numad 2012-03-15 12:24:56 +08:00
qemuxml2argv-channel-spicevmc.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-channel-spicevmc.xml qemu: Support numad 2012-03-15 12:24:56 +08:00
qemuxml2argv-channel-virtio-auto.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-channel-virtio-auto.xml qemu: Support numad 2012-03-15 12:24:56 +08:00
qemuxml2argv-channel-virtio.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-channel-virtio.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-clock-france.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-clock-france.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-clock-localtime.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-clock-localtime.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-clock-utc.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-clock-utc.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-clock-variable.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-clock-variable.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-console-compat-auto.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-console-compat-auto.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-console-compat-chardev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-console-compat-chardev.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-console-compat.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-console-compat.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-console-sclp.args S390: Do not generate a default USB controller 2013-04-30 19:18:43 -06:00
qemuxml2argv-console-sclp.xml S390: Enable SCLP Console in QEMU driver 2013-01-08 11:37:52 +01:00
qemuxml2argv-console-virtio-ccw.args S390: Do not generate a default USB controller 2013-04-30 19:18:43 -06:00
qemuxml2argv-console-virtio-ccw.xml S390: Testcases for virtio-ccw machines 2013-03-13 18:21:50 -06:00
qemuxml2argv-console-virtio-many.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-console-virtio-many.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-console-virtio-s390.args S390: Do not generate a default USB controller 2013-04-30 19:18:43 -06:00
qemuxml2argv-console-virtio-s390.xml S390: Testcases for virtio-ccw machines 2013-03-13 18:21:50 -06:00
qemuxml2argv-console-virtio.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-console-virtio.xml qemu: Support numad 2012-03-15 12:24:56 +08:00
qemuxml2argv-controller-order.args qemu: Improve handling of channels when generating SPICE command line 2013-04-24 14:37:57 +02:00
qemuxml2argv-controller-order.xml tests: Add test for controller order 2012-11-06 10:11:35 +01:00
qemuxml2argv-cpu-eoi-disabled.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-eoi-disabled.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-cpu-eoi-enabled.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-eoi-enabled.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-cpu-exact1.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-exact1.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-exact2-nofallback.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-exact2-nofallback.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-exact2.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-exact2.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-fallback.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-fallback.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-host-kvmclock.args qemu: Move -enable-kvm and friends earlier in the command line 2013-04-23 21:19:35 +02:00
qemuxml2argv-cpu-host-kvmclock.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-cpu-host-model-fallback.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-host-model-fallback.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-host-model-nofallback.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-host-model.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-host-model.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-host-passthrough.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-host-passthrough.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-kvmclock.args qemu: Move -enable-kvm and friends earlier in the command line 2013-04-23 21:19:35 +02:00
qemuxml2argv-cpu-kvmclock.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-cpu-minimum1.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-minimum1.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-minimum2.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-minimum2.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-nofallback.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-numa1.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-numa1.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-numa2.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-numa2.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-qemu-host-passthrough.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-strict1.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-strict1.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-topology1.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-topology1.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-topology2.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-topology2.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cpu-topology3.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cpu-topology3.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-cputune.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-cputune.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-aio.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-aio.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-blockio.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-blockio.xml Rename iolimit to blockio. 2012-09-04 09:14:36 -06:00
qemuxml2argv-disk-cdrom-empty.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-cdrom-empty.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-disk-cdrom-tray-no-device-cap.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-cdrom-tray-no-device-cap.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-cdrom-tray.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-cdrom-tray.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-cdrom.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-cdrom.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-disk-copy_on_read.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-copy_on_read.xml conf: Fix the bug of disk->copy_on_read formating 2013-05-16 23:07:51 +08:00
qemuxml2argv-disk-drive-boot-cdrom.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-boot-cdrom.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-disk-drive-boot-disk.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-boot-disk.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-disk-drive-cache-directsync.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-directsync.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-cache-unsafe.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-unsafe.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-cache-v1-none.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-v1-none.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-cache-v1-wb.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-v1-wb.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-cache-v1-wt.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-v1-wt.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-cache-v2-none.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-v2-none.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-cache-v2-wb.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-v2-wb.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-cache-v2-wt.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-cache-v2-wt.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-discard.args qemu: Change values of disk discard 2013-05-17 13:03:25 +08:00
qemuxml2argv-disk-drive-discard.xml qemu: Change values of disk discard 2013-05-17 13:03:25 +08:00
qemuxml2argv-disk-drive-error-policy-enospace.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-error-policy-enospace.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-error-policy-stop.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-error-policy-stop.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-error-policy-wreport-rignore.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-error-policy-wreport-rignore.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-fat.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-fat.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-fmt-qcow.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-fmt-qcow.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-network-gluster.args qemu: add support for libiscsi 2013-03-22 12:10:22 +08:00
qemuxml2argv-disk-drive-network-gluster.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-network-iscsi-auth.args qemu: pass iscsi authorization credentials 2013-03-22 12:10:23 +08:00
qemuxml2argv-disk-drive-network-iscsi-auth.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-network-iscsi-lun.args qemu: support passthrough for iscsi disks 2013-03-22 12:10:23 +08:00
qemuxml2argv-disk-drive-network-iscsi-lun.xml qemu: support passthrough for iscsi disks 2013-03-22 12:10:23 +08:00
qemuxml2argv-disk-drive-network-iscsi.args qemu: add support for libiscsi 2013-03-22 12:10:22 +08:00
qemuxml2argv-disk-drive-network-iscsi.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-network-nbd-export.args virCaps: get rid of defaultDiskDriverType 2013-04-04 22:42:38 +02:00
qemuxml2argv-disk-drive-network-nbd-export.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-network-nbd-ipv6-export.args virCaps: get rid of defaultDiskDriverType 2013-04-04 22:42:38 +02:00
qemuxml2argv-disk-drive-network-nbd-ipv6-export.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-network-nbd-ipv6.args virCaps: get rid of defaultDiskDriverType 2013-04-04 22:42:38 +02:00
qemuxml2argv-disk-drive-network-nbd-ipv6.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-network-nbd-unix.args virCaps: get rid of defaultDiskDriverType 2013-04-04 22:42:38 +02:00
qemuxml2argv-disk-drive-network-nbd-unix.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-network-nbd.args virCaps: get rid of defaultDiskDriverType 2013-04-04 22:42:38 +02:00
qemuxml2argv-disk-drive-network-nbd.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-network-rbd-auth.args virCaps: get rid of defaultDiskDriverType 2013-04-04 22:42:38 +02:00
qemuxml2argv-disk-drive-network-rbd-auth.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-network-rbd-ceph-env.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-network-rbd-ceph-env.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-disk-drive-network-rbd-ipv6.args virCaps: get rid of defaultDiskDriverType 2013-04-04 22:42:38 +02:00
qemuxml2argv-disk-drive-network-rbd-ipv6.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-network-rbd-no-colon.xml Rename rbd-invalid.xml to rbd-no-colon.xml 2013-05-14 20:09:48 +01:00
qemuxml2argv-disk-drive-network-rbd.args virCaps: get rid of defaultDiskDriverType 2013-04-04 22:42:38 +02:00
qemuxml2argv-disk-drive-network-rbd.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-network-sheepdog.args virCaps: get rid of defaultDiskDriverType 2013-04-04 22:42:38 +02:00
qemuxml2argv-disk-drive-network-sheepdog.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-drive-no-boot.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-no-boot.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-readonly-disk.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-readonly-disk.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-readonly-no-device.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-readonly-no-device.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-drive-shared.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-drive-shared.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-floppy-tray-no-device-cap.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-floppy-tray-no-device-cap.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-floppy-tray.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-floppy-tray.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-floppy.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-floppy.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-disk-geometry.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-geometry.xml qemu: Disk Geometry Override Support 2012-08-21 15:35:48 -06:00
qemuxml2argv-disk-ide-drive-split.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-ide-drive-split.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-ide-wwn.args qemu: Allow the disk wwn to have "0x" prefix 2013-04-17 23:05:56 +08:00
qemuxml2argv-disk-ide-wwn.xml qemu: Use disk wwn in qemu command line 2012-09-18 15:00:01 +08:00
qemuxml2argv-disk-ioeventfd.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-ioeventfd.xml test: Don't assume VNC is always available 2012-10-22 23:16:11 +08:00
qemuxml2argv-disk-many.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-many.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-disk-mirror.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-order.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-order.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-sata-device.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-sata-device.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-scsi-device-auto.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-device-auto.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-scsi-device.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-device.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-scsi-disk-split.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-disk-split.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-scsi-disk-vpd-build-error.xml qemu: Allow the user to specify vendor and product for disk 2012-12-07 16:53:27 +08:00
qemuxml2argv-disk-scsi-disk-vpd.args qemu: Allow the user to specify vendor and product for disk 2012-12-07 16:53:27 +08:00
qemuxml2argv-disk-scsi-disk-vpd.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-scsi-disk-wwn.args qemu: Allow the disk wwn to have "0x" prefix 2013-04-17 23:05:56 +08:00
qemuxml2argv-disk-scsi-disk-wwn.xml qemu: Allow the disk wwn to have "0x" prefix 2013-04-17 23:05:56 +08:00
qemuxml2argv-disk-scsi-lun-passthrough-sgio.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-scsi-lun-passthrough.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-lun-passthrough.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-scsi-megasas.args qemu: add support for LSI MegaRAID SAS1078 (aka megasas) SCSI controller 2013-03-22 12:11:14 +08:00
qemuxml2argv-disk-scsi-megasas.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-scsi-virtio-scsi.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-virtio-scsi.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-scsi-vscsi.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-scsi-vscsi.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-snapshot.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-snapshot.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-source-pool.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-transient.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-usb-device.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-usb-device.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-disk-usb.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-usb.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-disk-virtio-ccw-many.args S390: Do not generate a default USB controller 2013-04-30 19:18:43 -06:00
qemuxml2argv-disk-virtio-ccw-many.xml S390: Testcases for virtio-ccw machines 2013-03-13 18:21:50 -06:00
qemuxml2argv-disk-virtio-ccw.args S390: Do not generate a default USB controller 2013-04-30 19:18:43 -06:00
qemuxml2argv-disk-virtio-ccw.xml S390: Testcases for virtio-ccw machines 2013-03-13 18:21:50 -06:00
qemuxml2argv-disk-virtio-s390.args S390: Do not generate a default USB controller 2013-04-30 19:18:43 -06:00
qemuxml2argv-disk-virtio-s390.xml S390: Adding testcases for s390 2012-07-11 11:19:05 +02:00
qemuxml2argv-disk-virtio-scsi-ccw.args S390: Do not generate a default USB controller 2013-04-30 19:18:43 -06:00
qemuxml2argv-disk-virtio-scsi-ccw.xml S390: Testcases for virtio-scsi and virtio-rng 2013-03-14 15:53:20 -06:00
qemuxml2argv-disk-virtio-scsi-num_queues.args qemu: Support multiple queue virtio-scsi 2013-04-06 10:08:47 +08:00
qemuxml2argv-disk-virtio-scsi-num_queues.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-disk-virtio.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-virtio.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-disk-xenvbd.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-disk-xenvbd.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-encrypted-disk.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-encrypted-disk.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-eoi-disabled.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-eoi-disabled.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-eoi-enabled.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-eoi-enabled.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-event_idx.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-event_idx.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-floppy-drive-fat.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-floppy-drive-fat.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-fs9p.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-fs9p.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-graphics-listen-network2.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-graphics-listen-network.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-graphics-sdl-fullscreen.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-sdl-fullscreen.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-graphics-sdl.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-sdl.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-graphics-spice-agentmouse.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-spice-agentmouse.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-graphics-spice-compression.args qemu: Support ram bar size for qxl devices 2013-01-22 10:40:45 -07:00
qemuxml2argv-graphics-spice-compression.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-graphics-spice-qxl-vga.args qemu: Support ram bar size for qxl devices 2013-01-22 10:40:45 -07:00
qemuxml2argv-graphics-spice-qxl-vga.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-graphics-spice-timeout.args qemu: Improve handling of channels when generating SPICE command line 2013-04-24 14:37:57 +02:00
qemuxml2argv-graphics-spice-timeout.xml Remove probing of CPU models when launching QEMU guests 2012-09-27 10:24:52 +01:00
qemuxml2argv-graphics-spice-usb-redir.args domain_conf: add "usbredir" to list of valid spice channels 2012-05-08 09:22:45 -06:00
qemuxml2argv-graphics-spice-usb-redir.xml domain_conf: add "usbredir" to list of valid spice channels 2012-05-08 09:22:45 -06:00
qemuxml2argv-graphics-spice.args qemu: Support ram bar size for qxl devices 2013-01-22 10:40:45 -07:00
qemuxml2argv-graphics-spice.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-graphics-vnc-policy.args qemu: add ', share=<policy>' to qemu commandline 2013-05-22 19:18:48 +08:00
qemuxml2argv-graphics-vnc-policy.xml qemu: add ', share=<policy>' to qemu commandline 2013-05-22 19:18:48 +08:00
qemuxml2argv-graphics-vnc-sasl.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-vnc-sasl.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-graphics-vnc-socket.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-vnc-socket.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-graphics-vnc-tls.args Introduce a virQEMUDriverConfigPtr object 2013-02-05 15:49:25 +00:00
qemuxml2argv-graphics-vnc-tls.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-graphics-vnc-websocket.args qemu: Add VNC WebSocket support 2013-05-15 09:48:05 +02:00
qemuxml2argv-graphics-vnc-websocket.xml qemu: Add VNC WebSocket support 2013-05-15 09:48:05 +02:00
qemuxml2argv-graphics-vnc.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-graphics-vnc.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-hostdev-pci-address-device.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-hostdev-pci-address-device.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-hostdev-pci-address.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-hostdev-pci-address.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-hostdev-scsi-autogen-address.xml conf: Generate address for scsi host device automatically 2013-06-01 10:00:23 +08:00
qemuxml2argv-hostdev-scsi-boot.args qemu: Support bootindex for scsi host device 2013-05-13 19:08:32 +08:00
qemuxml2argv-hostdev-scsi-boot.xml qemu: Support bootindex for scsi host device 2013-05-13 19:08:32 +08:00
qemuxml2argv-hostdev-scsi-lsi.args qemu: Build qemu command line for scsi host device 2013-05-13 18:50:16 +08:00
qemuxml2argv-hostdev-scsi-lsi.xml qemu: Build qemu command line for scsi host device 2013-05-13 18:50:16 +08:00
qemuxml2argv-hostdev-scsi-readonly.args Introduce <readonly> for hostdev 2013-05-13 19:02:40 +08:00
qemuxml2argv-hostdev-scsi-readonly.xml Introduce <readonly> for hostdev 2013-05-13 19:02:40 +08:00
qemuxml2argv-hostdev-scsi-sgio.xml conf: Introduce sgio for hostdev 2013-05-17 00:46:44 +08:00
qemuxml2argv-hostdev-scsi-shareable.xml conf: Introduce <shareable> for hostdev 2013-05-16 23:41:25 +08:00
qemuxml2argv-hostdev-scsi-virtio-scsi.args qemu: Build qemu command line for scsi host device 2013-05-13 18:50:16 +08:00
qemuxml2argv-hostdev-scsi-virtio-scsi.xml qemu: Build qemu command line for scsi host device 2013-05-13 18:50:16 +08:00
qemuxml2argv-hostdev-usb-address-device-boot.args tests: add boot order for host and redirected USB to qemu argv test 2012-11-21 18:43:15 +01:00
qemuxml2argv-hostdev-usb-address-device-boot.xml tests: add boot order for host and redirected USB to qemu argv test 2012-11-21 18:43:15 +01:00
qemuxml2argv-hostdev-usb-address-device.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-hostdev-usb-address-device.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-hostdev-usb-address.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-hostdev-usb-address.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-hostdev-vfio.args qemu: use vfio-pci on commandline when appropriate 2013-04-25 21:28:10 -04:00
qemuxml2argv-hostdev-vfio.xml qemu: use vfio-pci on commandline when appropriate 2013-04-25 21:28:10 -04:00
qemuxml2argv-hugepages.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-hugepages.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-hyperv.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-hyperv.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-input-usbmouse-addr.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-input-usbmouse-addr.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-input-usbmouse.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-input-usbmouse.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-input-usbtablet.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-input-usbtablet.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-input-xen.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-input-xen.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-kvm.args qemu: Use -machine accel=tcg|kvm when available 2013-04-23 21:19:35 +02:00
qemuxml2argv-kvm.xml qemu: Use -machine accel=tcg|kvm when available 2013-04-23 21:19:35 +02:00
qemuxml2argv-kvmclock.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-kvmclock.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-kvmclock+eoi-disabled.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-kvmclock+eoi-disabled.xml fix kvm_pv_eoi with kvmclock 2012-10-08 20:13:55 +02:00
qemuxml2argv-lease.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-lease.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-machine-aliases1.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-machine-aliases1.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-machine-aliases2.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-machine-aliases2.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-machine-core-off.args qemu: Use -machine accel=tcg|kvm when available 2013-04-23 21:19:35 +02:00
qemuxml2argv-machine-core-off.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-machine-core-on.args qemu: Use -machine accel=tcg|kvm when available 2013-04-23 21:19:35 +02:00
qemuxml2argv-machine-core-on.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-machine-usb-opt.args qemu: Use -machine accel=tcg|kvm when available 2013-04-23 21:19:35 +02:00
qemuxml2argv-machine-usb-opt.xml Add USB option capability 2013-04-12 10:56:03 +01:00
qemuxml2argv-memtune.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-memtune.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-metadata.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-metadata.xml qemu: Support numad 2012-03-15 12:24:56 +08:00
qemuxml2argv-migrate.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-migrate.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-minimal-s390.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-minimal-s390.xml S390: Adding testcases for s390 2012-07-11 11:19:05 +02:00
qemuxml2argv-minimal.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-minimal.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-misc-acpi.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-misc-acpi.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-misc-disable-s3.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-misc-disable-s3.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-misc-disable-suspends.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-misc-disable-suspends.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-misc-enable-s4.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-misc-enable-s4.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-misc-no-reboot.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-misc-no-reboot.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-misc-uuid.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-misc-uuid.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-mlock-off.args qemu: Implement support for locking domain's memory pages 2013-05-16 23:21:58 +02:00
qemuxml2argv-mlock-off.xml qemu: Implement support for locking domain's memory pages 2013-05-16 23:21:58 +02:00
qemuxml2argv-mlock-on.args qemu: Implement support for locking domain's memory pages 2013-05-16 23:21:58 +02:00
qemuxml2argv-mlock-on.xml qemu: Implement support for locking domain's memory pages 2013-05-16 23:21:58 +02:00
qemuxml2argv-mlock-unsupported.args qemu: Implement support for locking domain's memory pages 2013-05-16 23:21:58 +02:00
qemuxml2argv-mlock-unsupported.xml qemu: Implement support for locking domain's memory pages 2013-05-16 23:21:58 +02:00
qemuxml2argv-monitor-json.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-monitor-json.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-multifunction-pci-device.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-multifunction-pci-device.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-net-bandwidth.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-net-client.args qemu: Record the default NIC model in the domain XML 2013-04-04 22:41:20 +02:00
qemuxml2argv-net-client.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-net-eth-ifname.args qemu: Record the default NIC model in the domain XML 2013-04-04 22:41:20 +02:00
qemuxml2argv-net-eth-ifname.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-net-eth-names.args qemu: Record the default NIC model in the domain XML 2013-04-04 22:41:20 +02:00
qemuxml2argv-net-eth-names.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-net-eth.args qemu: Record the default NIC model in the domain XML 2013-04-04 22:41:20 +02:00
qemuxml2argv-net-eth.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-net-hostdev-vfio.args qemu: use vfio-pci on commandline when appropriate 2013-04-25 21:28:10 -04:00
qemuxml2argv-net-hostdev-vfio.xml qemu: use vfio-pci on commandline when appropriate 2013-04-25 21:28:10 -04:00
qemuxml2argv-net-hostdev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-net-hostdev.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-net-mcast.args qemu: Record the default NIC model in the domain XML 2013-04-04 22:41:20 +02:00
qemuxml2argv-net-mcast.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-net-openvswitch.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-net-server.args qemu: Record the default NIC model in the domain XML 2013-04-04 22:41:20 +02:00
qemuxml2argv-net-server.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-net-user.args qemu: Record the default NIC model in the domain XML 2013-04-04 22:41:20 +02:00
qemuxml2argv-net-user.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-net-virtio-ccw.args S390: Do not generate a default USB controller 2013-04-30 19:18:43 -06:00
qemuxml2argv-net-virtio-ccw.xml S390: Testcases for virtio-ccw machines 2013-03-13 18:21:50 -06:00
qemuxml2argv-net-virtio-device.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-net-virtio-device.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-net-virtio-netdev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-net-virtio-netdev.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-net-virtio-network-portgroup.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-net-virtio-s390.args S390: Do not generate a default USB controller 2013-04-30 19:18:43 -06:00
qemuxml2argv-net-virtio-s390.xml S390: Adding testcases for s390 2012-07-11 11:19:05 +02:00
qemuxml2argv-net-virtio.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-net-virtio.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-no-shutdown.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-no-shutdown.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-nographics-vga.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-nographics-vga.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-nographics.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-nographics.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-nosharepages.args qemu: New XML to disable memory merge at guest startup 2013-05-15 11:25:45 +08:00
qemuxml2argv-nosharepages.xml qemu: New XML to disable memory merge at guest startup 2013-05-15 11:25:45 +08:00
qemuxml2argv-numad-auto-memory-vcpu-cpuset.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-numad-auto-memory-vcpu-cpuset.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-numad-auto-memory-vcpu-no-cpuset-and-placement.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-numad-auto-memory-vcpu-no-cpuset-and-placement.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-numad-auto-vcpu-no-numatune.xml numad: Set memory policy from numad advisory nodeset 2012-05-08 16:57:32 -06:00
qemuxml2argv-numad-auto-vcpu-static-numatune.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-numad-auto-vcpu-static-numatune.xml numad: Set memory policy from numad advisory nodeset 2012-05-08 16:57:32 -06:00
qemuxml2argv-numad-static-memory-auto-vcpu.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-numad-static-memory-auto-vcpu.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-numad-static-vcpu-no-numatune.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-numad.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-numad.xml numad: Set memory policy from numad advisory nodeset 2012-05-08 16:57:32 -06:00
qemuxml2argv-numatune-memory.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-numatune-memory.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-parallel-parport-chardev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-parallel-parport-chardev.xml Fix for parallel port passthrough for QEMU 2012-06-04 16:46:23 -06:00
qemuxml2argv-parallel-tcp-chardev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-parallel-tcp-chardev.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-parallel-tcp.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-parallel-tcp.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-pci-autoadd-addr.args qemu: auto-add bridges and allow using them 2013-04-25 13:19:40 +02:00
qemuxml2argv-pci-autoadd-addr.xml qemu: auto-add bridges and allow using them 2013-04-25 13:19:40 +02:00
qemuxml2argv-pci-autoadd-idx.args qemu: auto-add bridges and allow using them 2013-04-25 13:19:40 +02:00
qemuxml2argv-pci-autoadd-idx.xml qemu: auto-add bridges and allow using them 2013-04-25 13:19:40 +02:00
qemuxml2argv-pci-bridge.xml qemu: auto-add bridges and allow using them 2013-04-25 13:19:40 +02:00
qemuxml2argv-pci-rom.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-pci-rom.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-ppc-dtb.args qemu: add dtb option support 2013-03-19 15:48:58 -06:00
qemuxml2argv-ppc-dtb.xml qemu: add dtb option support 2013-03-19 15:48:58 -06:00
qemuxml2argv-pseries-basic.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-pseries-basic.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-pseries-nvram.args qemu: Add command line builder and parser for NVRAM. 2013-04-25 16:50:45 +08:00
qemuxml2argv-pseries-nvram.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-pseries-usb-default.args Set legacy USB option with default for ppc64. 2013-04-19 11:30:49 +01:00
qemuxml2argv-pseries-usb-default.xml Set legacy USB option with default for ppc64. 2013-04-19 11:30:49 +01:00
qemuxml2argv-pseries-usb-multi.args Set legacy USB option with default for ppc64. 2013-04-19 11:30:49 +01:00
qemuxml2argv-pseries-usb-multi.xml Set legacy USB option with default for ppc64. 2013-04-19 11:30:49 +01:00
qemuxml2argv-pseries-vio-address-clash.args tests: Add qemuxml2argv tests for PPC64 pseries machine 2012-01-13 16:10:43 -07:00
qemuxml2argv-pseries-vio-address-clash.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-pseries-vio-user-assigned.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-pseries-vio-user-assigned.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-pseries-vio.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-pseries-vio.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-qemu-ns-no-env.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-qemu-ns-no-env.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-qemu-ns.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-qemu-ns.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-reboot-timeout-disabled.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-reboot-timeout-disabled.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-reboot-timeout-enabled.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-reboot-timeout-enabled.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-restore-v1.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-restore-v1.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-restore-v2-fd.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-restore-v2-fd.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-restore-v2.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-restore-v2.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-s390-piix-controllers.args qemu: don't always reserve PCI addresses for implicit controllers 2013-04-27 12:55:46 +02:00
qemuxml2argv-s390-piix-controllers.xml qemu: don't always reserve PCI addresses for implicit controllers 2013-04-27 12:55:46 +02:00
qemuxml2argv-s390-usb-none.args qemu: don't assign a PCI address to 'none' USB controller 2013-04-26 20:06:01 +02:00
qemuxml2argv-s390-usb-none.xml qemu: don't assign a PCI address to 'none' USB controller 2013-04-26 20:06:01 +02:00
qemuxml2argv-seclabel-dynamic-baselabel.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-seclabel-dynamic-baselabel.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-seclabel-dynamic-override.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-seclabel-dynamic-override.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-seclabel-dynamic.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-seclabel-dynamic.xml Multiple security drivers in XML data 2012-08-20 19:13:33 +02:00
qemuxml2argv-seclabel-none.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-seclabel-none.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-seclabel-static-relabel.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-seclabel-static-relabel.xml qemu: Support numad 2012-03-15 12:24:56 +08:00
qemuxml2argv-seclabel-static.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-seclabel-static.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-serial-dev-chardev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-dev-chardev.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-dev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-dev.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-serial-file-chardev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-file-chardev.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-file.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-file.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-serial-many-chardev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-many-chardev.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-many.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-many.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-serial-pty-chardev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-pty-chardev.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-pty.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-pty.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-serial-target-port-auto.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-tcp-chardev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-tcp-chardev.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-tcp-telnet-chardev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-tcp-telnet-chardev.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-tcp-telnet.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-tcp-telnet.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-serial-tcp.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-tcp.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-serial-udp-chardev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-udp-chardev.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-udp.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-udp.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-serial-unix-chardev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-unix-chardev.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-unix.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-unix.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-serial-vc-chardev.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-vc-chardev.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-serial-vc.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-serial-vc.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-smartcard-controller.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-smartcard-controller.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-smartcard-host-certificates.args smartcard: spell ccid-card-emulated qemu property correctly 2013-04-02 06:23:33 -06:00
qemuxml2argv-smartcard-host-certificates.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-smartcard-host.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-smartcard-host.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-smartcard-passthrough-spicevmc.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-smartcard-passthrough-spicevmc.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-smartcard-passthrough-tcp.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-smartcard-passthrough-tcp.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-smbios-date.xml Validate the bios_date format for <sysinfo> 2013-05-15 12:05:22 -04:00
qemuxml2argv-smbios-uuid-match.xml Adjust improperly formatted <sysinfo> uuid 2013-05-15 12:05:22 -04:00
qemuxml2argv-smbios.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-smbios.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-smp.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-smp.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-sound-device.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-sound-device.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-sound.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-sound.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00
qemuxml2argv-tpm-no-backend-invalid.xml conf: don't crash on a tpm device with no backends 2013-05-09 14:25:11 +02:00
qemuxml2argv-tpm-passthrough.args Add test case for TPM passthrough 2013-04-12 16:55:46 -04:00
qemuxml2argv-tpm-passthrough.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-usb1-usb2.args qemu: make PCI multifunction support more manual 2011-10-01 11:48:28 -04:00
qemuxml2argv-usb1-usb2.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-usb-controller.args Default USB device is on slot 1 function 2 2011-09-05 15:03:27 +08:00
qemuxml2argv-usb-controller.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-usb-hub.args Default USB device is on slot 1 function 2 2011-09-05 15:03:27 +08:00
qemuxml2argv-usb-hub.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-usb-ich9-companion.args qemu: make PCI multifunction support more manual 2011-10-01 11:48:28 -04:00
qemuxml2argv-usb-ich9-companion.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-usb-ich9-ehci-addr.args Fix logic for assigning PCI addresses to USB2 companion controllers 2012-05-15 17:07:34 +01:00
qemuxml2argv-usb-ich9-ehci-addr.xml Set a sensible default master start port for ehci companion controllers 2012-05-15 17:07:34 +01:00
qemuxml2argv-usb-ich9-no-companion.xml Fix usb master startport parsing 2013-04-25 14:54:46 +02:00
qemuxml2argv-usb-none-hub.xml qemu: Add support for "none" USB controller 2012-08-02 12:13:48 +02:00
qemuxml2argv-usb-none-other.xml qemu: Add support for "none" USB controller 2012-08-02 12:13:48 +02:00
qemuxml2argv-usb-none-usbtablet.xml qemu: Add support for "none" USB controller 2012-08-02 12:13:48 +02:00
qemuxml2argv-usb-none.args qemu: don't assign a PCI address to 'none' USB controller 2013-04-26 20:06:01 +02:00
qemuxml2argv-usb-none.xml qemu: Add support for "none" USB controller 2012-08-02 12:13:48 +02:00
qemuxml2argv-usb-piix3-controller.args qemu: make PCI multifunction support more manual 2011-10-01 11:48:28 -04:00
qemuxml2argv-usb-piix3-controller.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-usb-ports.args Default USB device is on slot 1 function 2 2011-09-05 15:03:27 +08:00
qemuxml2argv-usb-ports.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-usb-redir-boot.args tests: add boot order for host and redirected USB to qemu argv test 2012-11-21 18:43:15 +01:00
qemuxml2argv-usb-redir-boot.xml tests: add boot order for host and redirected USB to qemu argv test 2012-11-21 18:43:15 +01:00
qemuxml2argv-usb-redir-filter.args test: add xml2argvtest for usb-redir filter and update xml schema 2012-09-13 17:22:37 +08:00
qemuxml2argv-usb-redir-filter.xml test: add xml2argvtest for usb-redir filter and update xml schema 2012-09-13 17:22:37 +08:00
qemuxml2argv-usb-redir.args qemu: make PCI multifunction support more manual 2011-10-01 11:48:28 -04:00
qemuxml2argv-usb-redir.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-vhost_queues.xml Introduce /domain/devices/interface/driver/@queues attribute 2013-05-22 16:31:27 +02:00
qemuxml2argv-video-device-pciaddr-default.args qemu: Support ram bar size for qxl devices 2013-01-22 10:40:45 -07:00
qemuxml2argv-video-device-pciaddr-default.xml tests: add one -device video device testcase 2012-12-17 14:02:58 +08:00
qemuxml2argv-virtio-lun.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-virtio-lun.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-virtio-rng-ccw.args S390: Do not generate a default USB controller 2013-04-30 19:18:43 -06:00
qemuxml2argv-virtio-rng-ccw.xml S390: Testcases for virtio-scsi and virtio-rng 2013-03-14 15:53:20 -06:00
qemuxml2argv-virtio-rng-default.args Fix crash parsing RNG device specification 2013-03-07 12:57:10 +00:00
qemuxml2argv-virtio-rng-default.xml Fix crash parsing RNG device specification 2013-03-07 12:57:10 +00:00
qemuxml2argv-virtio-rng-egd.args tests: Add tests for virtio-rng device handling 2013-02-25 10:58:04 +01:00
qemuxml2argv-virtio-rng-egd.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-virtio-rng-random.args virtio-rng: Add rate limiting options for virtio-RNG 2013-03-14 13:28:10 +01:00
qemuxml2argv-virtio-rng-random.xml qemu: auto-add pci-root controller for pc machine types 2013-04-25 13:05:10 +02:00
qemuxml2argv-watchdog-device.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-watchdog-device.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-watchdog-dump.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-watchdog-dump.xml numad: Always output 'placement' of <vcpu> 2012-05-08 16:57:37 -06:00
qemuxml2argv-watchdog.args qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
qemuxml2argv-watchdog.xml qemu: honor allowDiskFormatProbing when parsing command line 2013-04-29 15:52:02 +02:00